diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 2ecc712..e026391 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -24,6 +24,8 @@ Optional properties: - ti,no-reset-on-init: When present, the module should not be reset at init - ti,no-idle-on-init: When present, the module should not be idled at init - ti,no-idle: When present, the module is never allowed to idle. +- ti,deassert-hard-reset: list of hwmod and hardware reset line name pairs + (ascii strings) to be deasserted upon device instantiation. Example: diff --git b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt new file mode 100644 index 0000000..480e664 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt @@ -0,0 +1,21 @@ +STMPE ADC driver +---------------- + +Required properties: + - compatible: "st,stmpe-adc" + +Optional properties: +Note that the ADC is shared with the STMPE touchscreen. ADC related settings +have to be done in the mfd. +- st,norequest-mask: bitmask specifying which ADC channels should _not_ be + requestable due to different usage (e.g. touch) + +Node name must be stmpe_adc and should be child node of stmpe node to +which it belongs. + +Example: + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */ + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt index 127baa3..4145865 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt @@ -5,36 +5,52 @@ Required properties: - compatible: "st,stmpe-ts" Optional properties: -- st,sample-time: ADC converstion time in number of clock. (0 -> 36 clocks, 1 -> - 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6 - -> 144 clocks), recommended is 4. -- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) -- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external - reference) -- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) -- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 - samples, 3 -> 8 samples) -- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 -> - 100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended - is 3 -- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 - -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2 -- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of - the fractional part) recommended is 7 -- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35 - mA max, 1 -> 50 mA typical 80 mA max) +- st,ave-ctrl : Sample average control + 0 -> 1 sample + 1 -> 2 samples + 2 -> 4 samples + 3 -> 8 samples +- st,touch-det-delay : Touch detect interrupt delay (recommended is 3) + 0 -> 10 us 5 -> 5 ms + 1 -> 50 us 6 -> 10 ms + 2 -> 100 us 7 -> 50 ms + 3 -> 500 us + 4-> 1 ms +- st,settling : Panel driver settling time (recommended is 2) + 0 -> 10 us 5 -> 10 ms + 1 -> 100 us 6 for 50 ms + 2 -> 500 us 7 -> 100 ms + 3 -> 1 ms + 4 -> 5 ms +- st,fraction-z : Length of the fractional part in z (recommended is 7) + (fraction-z ([0..7]) = Count of the fractional part) +- st,i-drive : current limit value of the touchscreen drivers + 0 -> 20 mA (typical 35mA max) + 1 -> 50 mA (typical 80 mA max) + +Optional properties common with MFD (deprecated): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks 4 -> 80 clocks (recommended) + 1 -> 44 clocks 5 -> 96 clocks + 2 -> 56 clocks 6 -> 124 clocks + 3 -> 64 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz + 1 -> 3.25 MHz Node name must be stmpe_touchscreen and should be child node of stmpe node to which it belongs. +Note that common ADC settings of stmpe_touchscreen will take precedence. + Example: stmpe_touchscreen { compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; st,ave-ctrl = <1>; st,touch-det-delay = <2>; st,settling = <2>; diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt index c797c05..d4408a4 100644 --- a/Documentation/devicetree/bindings/mfd/stmpe.txt +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt @@ -4,15 +4,29 @@ STMPE is an MFD device which may expose the following inbuilt devices: gpio, keypad, touchscreen, adc, pwm, rotator. Required properties: - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" - - reg : I2C/SPI address of the device + - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" + - reg : I2C/SPI address of the device Optional properties: - - interrupts : The interrupt outputs from the controller - - interrupt-controller : Marks the device node as an interrupt controller - - wakeup-source : Marks the input device as wakable - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - - irq-gpio : If present, which GPIO to use for event IRQ + - interrupts : The interrupt outputs from the controller + - interrupt-controller : Marks the device node as an interrupt controller + - wakeup-source : Marks the input device as wakable + - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 + - irq-gpio : If present, which GPIO to use for event IRQ + +Optional properties for devices with touch and ADC (STMPE811|STMPE610): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks 4 -> 80 clocks (recommended) + 1 -> 44 clocks 5 -> 96 clocks + 2 -> 56 clocks 6 -> 124 clocks + 3 -> 64 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz + 1 -> 3.25 MHz Example: diff --git b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt new file mode 100644 index 0000000..ebf0d47 --- /dev/null +++ b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt @@ -0,0 +1,48 @@ +The generic power sequence library + +Some hard-wired devices (eg USB/MMC) need to do power sequence before +the device can be enumerated on the bus, the typical power sequence +like: enable USB PHY clock, toggle reset pin, etc. But current +Linux device driver lacks of such code to do it, it may cause some +hard-wired devices works abnormal or can't be recognized by +controller at all. The power sequence will be done before this device +can be found at the bus. + +The power sequence properties is under the device node. + +Optional properties: +- clocks: the input clocks for device. +- reset-gpios: Should specify the GPIO for reset. +- reset-duration-us: the duration in microsecond for assert reset signal. + +Below is the example of USB power sequence properties on USB device +nodes which have two level USB hubs. + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + genesys: hub@1 { + compatible = "usb5e3,608"; + reg = <1>; + + clocks = <&clks IMX6SX_CLK_CKO>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */ + reset-duration-us = <10>; + + #address-cells = <1>; + #size-cells = <0>; + asix: ethernet@1 { + compatible = "usbb95,1708"; + reg = <1>; + + clocks = <&clks IMX6SX_CLK_IPG>; + reset-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* ethernet_rst */ + reset-duration-us = <15>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index 036be17..cb85f82 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -65,6 +65,9 @@ Required properties for host-controller nodes with device nodes: - #address-cells: shall be 1 - #size-cells: shall be 0 +Optional properties: +power sequence properties, see +Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt for detail Example: @@ -72,9 +75,13 @@ Example: #address-cells = <1>; #size-cells = <0>; - hub@1 { /* hub connected to port 1 */ + genesys: hub@1 { /* hub connected to port 1 */ compatible = "usb5e3,608"; reg = <1>; + + clocks = <&clks IMX6SX_CLK_CKO>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */ + reset-duration-us = <10>; }; device@2 { /* device connected to port 2 */ diff --git b/Documentation/power/power-sequence/design.rst b/Documentation/power/power-sequence/design.rst new file mode 100644 index 0000000..554608e --- /dev/null +++ b/Documentation/power/power-sequence/design.rst @@ -0,0 +1,54 @@ +==================================== +Power Sequence Library +==================================== + +:Date: Feb, 2017 +:Author: Peter Chen + + +Introduction +============ + +We have an well-known problem that the device needs to do a power +sequence before it can be recognized by related host, the typical +examples are hard-wired mmc devices and usb devices. The host controller +can't know what kinds of this device is in its bus if the power +sequence has not done, since the related devices driver's probe calling +is determined by runtime according to eunumeration results. Besides, +the devices may have custom power sequence, so the power sequence library +which is independent with the devices is needed. + +Design +============ + +The power sequence library includes the core file and customer power +sequence library. The core file exports interfaces are called by +host controller driver for power sequence and customer power sequence +library files to register its power sequence instance to global +power sequence list. The custom power sequence library creates power +sequence instance and implement custom power sequence. + +Since the power sequence describes hardware design, the description is +located at board description file, eg, device tree dts file. And +a specific power sequence belongs to device, so its description +is under the device node, please refer to: +Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt + +Custom power sequence library allocates one power sequence instance at +bootup periods using postcore_initcall, this static allocated instance is +used to compare with device-tree (DT) node to see if this library can be +used for the node or not. When the result is matched, the core API will +try to get resourses (->get, implemented at each library) for power +sequence, if all resources are got, it will try to allocate another +instance for next possible request from host driver. + +Then, the host controller driver can carry out power sequence on for this +DT node, the library will do corresponding operations, like open clocks, +toggle gpio, etc. The power sequence off routine will close and free the +resources, and is called when the parent is removed. And the power +sequence suspend and resume routine can be called at host driver's +suspend and resume routine if needed. + +The exported interfaces +.. kernel-doc:: drivers/power/pwrseq/core.c + :export: diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt index 8fbf0aa..72db8dd 100644 --- a/Documentation/pwm.txt +++ b/Documentation/pwm.txt @@ -85,9 +85,11 @@ will find: The PWM channels are numbered using a per-chip index from 0 to npwm-1. -When a PWM channel is exported a pwmX directory will be created in the +When a PWM channel is exported a pwm-N:X directory will be created in the pwmchipN directory it is associated with, where X is the number of the -channel that was exported. The following properties will then be available: +channel that was exported. It will also be exposed at /sys/class/pwm/ and +can be identified by the pwm_channel device type. +The following properties will then be available: period The total period of the PWM signal (read/write). diff --git a/MAINTAINERS b/MAINTAINERS index f3a5c97..d033a8b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12006,6 +12006,15 @@ F: drivers/firmware/psci*.c F: include/linux/psci.h F: include/uapi/linux/psci.h +POWER SEQUENCE LIBRARY +M: Peter Chen +T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git +L: linux-pm@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/power/pwrseq/ +F: drivers/power/pwrseq/ +F: include/linux/power/pwrseq.h + POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS M: Sebastian Reichel L: linux-pm@vger.kernel.org diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index a3af4dc..5e9c1d6 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -29,6 +29,10 @@ export ZRELADDR INITRD_PHYS PARAMS_PHYS targets := Image zImage xipImage bootpImage uImage +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + ifeq ($(CONFIG_XIP_KERNEL),y) cmd_deflate_xip_data = $(CONFIG_SHELL) -c \ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b0e966d..3dd16aa 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,4 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 + +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + dtb-$(CONFIG_ARCH_ALPINE) += \ alpine-db.dtb dtb-$(CONFIG_MACH_ARTPEC6) += \ @@ -452,6 +457,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-b650v3.dtb \ imx6q-b850v3.dtb \ imx6q-cm-fx6.dtb \ + imx6q-ccimx6sbc.dtb \ imx6q-cubox-i.dtb \ imx6q-cubox-i-emmc-som-v15.dtb \ imx6q-cubox-i-som-v15.dtb \ @@ -549,6 +555,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-udoo-neo-full.dtb dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ + imx6ul-14x14-evk-ism43362-b81-evb.dtb \ imx6ul-ccimx6ulsbcexpress.dtb \ imx6ul-ccimx6ulsbcpro.dtb \ imx6ul-geam.dtb \ @@ -701,6 +708,16 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-bonegreen-wireless-uboot-univ.dtb \ + am335x-boneblack-uboot-univ.dtb \ + am335x-bone-uboot-univ.dtb \ + am335x-boneblack-audio.dtb \ + am335x-boneblack-bbb-exp-r.dtb \ + am335x-boneblack-bbb-exp-c.dtb \ + am335x-boneblack-bbbmini.dtb \ + am335x-boneblack-wl1835mod.dtb \ + am335x-abbbi.dtb \ + am335x-boneblack-uboot.dtb \ am335x-boneblack-wireless.dtb \ am335x-boneblue.dtb \ am335x-bonegreen.dtb \ @@ -731,6 +748,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ + omap4-panda-es-b3.dtb \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ diff --git b/arch/arm/boot/dts/am335x-abbbi.dts b/arch/arm/boot/dts/am335x-abbbi.dts new file mode 100644 index 0000000..6d5339c --- /dev/null +++ b/arch/arm/boot/dts/am335x-abbbi.dts @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright 2015 Konsulko Group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + + +/ { + model = "Arrow BeagleBone Black Industrial"; + compatible = "arrow,am335x-abbbi", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + adi_hdmi_bbbi_pins: adi_hdmi_bbbi_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; +}; + +&lcdc { + status = "okay"; + + /* If you want to get 24 bit RGB and 16 BGR mode instead of + * current 16 bit RGB and 24 BGR modes, set the propety + * below to "crossed" and uncomment the video-ports -property + * in tda19988 node. + */ + blue-and-red-wiring = "straight"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + adv7511: adv7511@39 { + compatible = "adi,adv7511"; + reg = <0x39>; + + pinctrl-names = "default"; + pinctrl-0 = <&adi_hdmi_bbbi_pins>; + + /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ + /* video-ports = <0x234501>; */ + + #sound-dai-cells = <0>; + + ports { + port@0 { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + }; +}; + +&rtc { + system-power-controller; +}; + +&mcasp0 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +/ { + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "TI BeagleBone Black"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&mcasp0>; + clocks = <&clk_mcasp0>; + }; + + simple-audio-card,codec { + sound-dai = <&adv7511>; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi new file mode 100644 index 0000000..33dd54b --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi @@ -0,0 +1,387 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + chosen { + stdout-path = &uart0; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led2 { + label = "beaglebone:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led3 { + label = "beaglebone:green:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + }; + + vmmcsd_fixed: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spio0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; + interrupts-extended = <&intc 18 &tps 0>; + interrupt-names = "mc", "vbus"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; +}; + + +/include/ "tps65217.dtsi" + +&tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ + + interrupts = <7>; /* NMI */ + interrupt-parent = <&intc>; + + ti,pmic-shutdown-controller; + + charger { + status = "okay"; + }; + + pwrbutton { + status = "okay"; + }; + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1351500>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy-handle = <ðphy0>; + phy-mode = "mii"; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; + +&rtc { + clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clock-names = "ext-clk", "int-clk"; + system-power-controller; +}; + +//&pruss_soc_bus { +// status = "okay"; +// +// pruss: pruss@4a300000 { +// status = "okay"; +// }; +//}; diff --git b/arch/arm/boot/dts/am335x-bone-common-univ.dtsi b/arch/arm/boot/dts/am335x-bone-common-univ.dtsi new file mode 100644 index 0000000..cdc9a97 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-univ.dtsi @@ -0,0 +1,2919 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + + /* P8_02 GND */ + + + /* P8_03 (ZCZ ball R9) emmc */ + P8_03_default_pin: pinmux_P8_03_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_pin: pinmux_P8_03_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_pu_pin: pinmux_P8_03_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_pd_pin: pinmux_P8_03_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_input_pin: pinmux_P8_03_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + + /* P8_04 (ZCZ ball T9) emmc */ + P8_04_default_pin: pinmux_P8_04_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_pin: pinmux_P8_04_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_pu_pin: pinmux_P8_04_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_pd_pin: pinmux_P8_04_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_input_pin: pinmux_P8_04_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + + /* P8_05 (ZCZ ball R8) emmc */ + P8_05_default_pin: pinmux_P8_05_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_pin: pinmux_P8_05_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_pu_pin: pinmux_P8_05_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_pd_pin: pinmux_P8_05_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_input_pin: pinmux_P8_05_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + + /* P8_06 (ZCZ ball T8) emmc */ + P8_06_default_pin: pinmux_P8_06_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_pin: pinmux_P8_06_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_pu_pin: pinmux_P8_06_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_pd_pin: pinmux_P8_06_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_input_pin: pinmux_P8_06_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + + /* P8_07 (ZCZ ball R7) gpio2_2 */ + P8_07_default_pin: pinmux_P8_07_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_pin: pinmux_P8_07_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_pu_pin: pinmux_P8_07_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_pd_pin: pinmux_P8_07_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_input_pin: pinmux_P8_07_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_timer_pin: pinmux_P8_07_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_advn_ale.timer4 */ + + /* P8_08 (ZCZ ball T7) gpio2_3 */ + P8_08_default_pin: pinmux_P8_08_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_pin: pinmux_P8_08_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_pu_pin: pinmux_P8_08_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_pd_pin: pinmux_P8_08_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_input_pin: pinmux_P8_08_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_timer_pin: pinmux_P8_08_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_oen_ren.timer7 */ + + /* P8_09 (ZCZ ball T6) gpio2_5 */ + P8_09_default_pin: pinmux_P8_09_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_pin: pinmux_P8_09_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_pu_pin: pinmux_P8_09_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_pd_pin: pinmux_P8_09_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_input_pin: pinmux_P8_09_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_timer_pin: pinmux_P8_09_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_be0n_cle.timer5 */ + + /* P8_10 (ZCZ ball U6) gpio2_4 */ + P8_10_default_pin: pinmux_P8_10_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_pin: pinmux_P8_10_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_pu_pin: pinmux_P8_10_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_pd_pin: pinmux_P8_10_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_input_pin: pinmux_P8_10_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_timer_pin: pinmux_P8_10_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_wen.timer6 */ + + /* P8_11 (ZCZ ball R12) gpio1_13 */ + P8_11_default_pin: pinmux_P8_11_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_pin: pinmux_P8_11_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_pu_pin: pinmux_P8_11_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_pd_pin: pinmux_P8_11_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_input_pin: pinmux_P8_11_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_qep_pin: pinmux_P8_11_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad13.eqep2b_in */ + P8_11_pruout_pin: pinmux_P8_11_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_ad13.pru0_out15 */ + + /* P8_12 (ZCZ ball T12) gpio1_12 */ + P8_12_default_pin: pinmux_P8_12_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_pin: pinmux_P8_12_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_pu_pin: pinmux_P8_12_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_pd_pin: pinmux_P8_12_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_input_pin: pinmux_P8_12_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_qep_pin: pinmux_P8_12_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad12.eqep2a_in */ + P8_12_pruout_pin: pinmux_P8_12_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_ad12.pru0_out14 */ + + /* P8_13 (ZCZ ball T10) gpio0_23 */ + P8_13_default_pin: pinmux_P8_13_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_pin: pinmux_P8_13_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_pu_pin: pinmux_P8_13_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_pd_pin: pinmux_P8_13_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_input_pin: pinmux_P8_13_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_pwm_pin: pinmux_P8_13_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad9.ehrpwm2b */ + + /* P8_14 (ZCZ ball T11) gpio0_26 */ + P8_14_default_pin: pinmux_P8_14_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P8_14_gpio_pin: pinmux_P8_14_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P8_14_gpio_pu_pin: pinmux_P8_14_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P8_14_gpio_pd_pin: pinmux_P8_14_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P8_14_gpio_input_pin: pinmux_P8_14_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P8_14_pwm_pin: pinmux_P8_14_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad10.ehrpwm2_tripzone_input */ + + /* P8_15 (ZCZ ball U13) gpio1_15 */ + P8_15_default_pin: pinmux_P8_15_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_pin: pinmux_P8_15_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_input_pin: pinmux_P8_15_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_qep_pin: pinmux_P8_15_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad15.eqep2_strobe */ + P8_15_pru_ecap_pin: pinmux_P8_15_pru_ecap_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_ad15.pr1_ecap0_ecap_capin_apwm_o */ + P8_15_pruin_pin: pinmux_P8_15_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_ad15.pru0_in15 */ + + /* P8_16 (ZCZ ball V13) gpio1_14 */ + P8_16_default_pin: pinmux_P8_16_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_pin: pinmux_P8_16_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_pu_pin: pinmux_P8_16_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_pd_pin: pinmux_P8_16_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_input_pin: pinmux_P8_16_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_qep_pin: pinmux_P8_16_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad14.eqep2_index */ + P8_16_pruin_pin: pinmux_P8_16_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_ad14.pru0_in14 */ + + /* P8_17 (ZCZ ball U12) gpio0_27 */ + P8_17_default_pin: pinmux_P8_17_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P8_17_gpio_pin: pinmux_P8_17_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P8_17_gpio_pu_pin: pinmux_P8_17_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P8_17_gpio_pd_pin: pinmux_P8_17_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P8_17_gpio_input_pin: pinmux_P8_17_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P8_17_pwm_pin: pinmux_P8_17_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad11.ehrpwm0_synco */ + + /* P8_18 (ZCZ ball V12) gpio2_1 */ + P8_18_default_pin: pinmux_P8_18_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_pin: pinmux_P8_18_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_pu_pin: pinmux_P8_18_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_pd_pin: pinmux_P8_18_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_input_pin: pinmux_P8_18_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + + /* P8_19 (ZCZ ball U10) gpio0_22 */ + P8_19_default_pin: pinmux_P8_19_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_pin: pinmux_P8_19_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_pu_pin: pinmux_P8_19_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_pd_pin: pinmux_P8_19_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_input_pin: pinmux_P8_19_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_pwm_pin: pinmux_P8_19_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad8.ehrpwm2a */ + + /* P8_20 (ZCZ ball V9) emmc */ + P8_20_default_pin: pinmux_P8_20_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_pin: pinmux_P8_20_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_pu_pin: pinmux_P8_20_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_pd_pin: pinmux_P8_20_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_input_pin: pinmux_P8_20_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_pruout_pin: pinmux_P8_20_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_csn2.pru1_out13 */ + P8_20_pruin_pin: pinmux_P8_20_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_csn2.pru1_in13 */ + + /* P8_21 (ZCZ ball U9) emmc */ + P8_21_default_pin: pinmux_P8_21_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_pin: pinmux_P8_21_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_pu_pin: pinmux_P8_21_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_pd_pin: pinmux_P8_21_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_input_pin: pinmux_P8_21_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_pruout_pin: pinmux_P8_21_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_csn1.pru1_out12 */ + P8_21_pruin_pin: pinmux_P8_21_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_csn1.pru1_in12 */ + + /* P8_22 (ZCZ ball V8) emmc */ + P8_22_default_pin: pinmux_P8_22_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_pin: pinmux_P8_22_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_pu_pin: pinmux_P8_22_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_pd_pin: pinmux_P8_22_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_input_pin: pinmux_P8_22_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + + /* P8_23 (ZCZ ball U8) emmc */ + P8_23_default_pin: pinmux_P8_23_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_pin: pinmux_P8_23_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_pu_pin: pinmux_P8_23_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_pd_pin: pinmux_P8_23_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_input_pin: pinmux_P8_23_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + + /* P8_24 (ZCZ ball V7) emmc */ + P8_24_default_pin: pinmux_P8_24_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_pin: pinmux_P8_24_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_pu_pin: pinmux_P8_24_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_pd_pin: pinmux_P8_24_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_input_pin: pinmux_P8_24_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + + /* P8_25 (ZCZ ball U7) emmc */ + P8_25_default_pin: pinmux_P8_25_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_pin: pinmux_P8_25_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_pu_pin: pinmux_P8_25_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_pd_pin: pinmux_P8_25_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_input_pin: pinmux_P8_25_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + + /* P8_26 (ZCZ ball V6) gpio1_29 */ + P8_26_default_pin: pinmux_P8_26_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x087c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn0.gpio1_29 */ + P8_26_gpio_pin: pinmux_P8_26_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x087c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn0.gpio1_29 */ + P8_26_gpio_pu_pin: pinmux_P8_26_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x087c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn0.gpio1_29 */ + P8_26_gpio_pd_pin: pinmux_P8_26_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x087c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn0.gpio1_29 */ + P8_26_gpio_input_pin: pinmux_P8_26_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x087c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_csn0.gpio1_29 */ + + /* P8_27 (ZCZ ball U5) hdmi */ + P8_27_default_pin: pinmux_P8_27_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_pin: pinmux_P8_27_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_pu_pin: pinmux_P8_27_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_pd_pin: pinmux_P8_27_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_input_pin: pinmux_P8_27_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_pruout_pin: pinmux_P8_27_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_vsync.pru1_out8 */ + P8_27_pruin_pin: pinmux_P8_27_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_vsync.pru1_in8 */ + + /* P8_28 (ZCZ ball V5) hdmi */ + P8_28_default_pin: pinmux_P8_28_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_pin: pinmux_P8_28_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_pu_pin: pinmux_P8_28_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_pd_pin: pinmux_P8_28_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_input_pin: pinmux_P8_28_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_pruout_pin: pinmux_P8_28_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_pclk.pru1_out10 */ + P8_28_pruin_pin: pinmux_P8_28_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_pclk.pru1_in10 */ + + /* P8_29 (ZCZ ball R5) hdmi */ + P8_29_default_pin: pinmux_P8_29_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_pin: pinmux_P8_29_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_pu_pin: pinmux_P8_29_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_pd_pin: pinmux_P8_29_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_input_pin: pinmux_P8_29_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_pruout_pin: pinmux_P8_29_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_hsync.pru1_out9 */ + P8_29_pruin_pin: pinmux_P8_29_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_hsync.pru1_in9 */ + + /* P8_30 (ZCZ ball R6) hdmi */ + P8_30_default_pin: pinmux_P8_30_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_pin: pinmux_P8_30_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_pu_pin: pinmux_P8_30_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_pd_pin: pinmux_P8_30_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_input_pin: pinmux_P8_30_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_pruout_pin: pinmux_P8_30_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_ac_bias_en.pru1_out11 */ + P8_30_pruin_pin: pinmux_P8_30_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE6) >; }; /* lcd_ac_bias_en.pru1_in11 */ + + /* P8_31 (ZCZ ball V4) hdmi */ + P8_31_default_pin: pinmux_P8_31_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_pin: pinmux_P8_31_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_pu_pin: pinmux_P8_31_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_pd_pin: pinmux_P8_31_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_input_pin: pinmux_P8_31_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_qep_pin: pinmux_P8_31_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data14.eqep1_index */ + P8_31_uart_pin: pinmux_P8_31_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* lcd_data14.uart5_rxd */ + + /* P8_32 (ZCZ ball T5) hdmi */ + P8_32_default_pin: pinmux_P8_32_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_pin: pinmux_P8_32_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_pu_pin: pinmux_P8_32_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_pd_pin: pinmux_P8_32_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_input_pin: pinmux_P8_32_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_qep_pin: pinmux_P8_32_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data15.eqep1_strobe */ + + /* P8_33 (ZCZ ball V3) hdmi */ + P8_33_default_pin: pinmux_P8_33_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_pin: pinmux_P8_33_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_pu_pin: pinmux_P8_33_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_pd_pin: pinmux_P8_33_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_input_pin: pinmux_P8_33_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_qep_pin: pinmux_P8_33_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data13.eqep1b_in */ + + /* P8_34 (ZCZ ball U4) hdmi */ + P8_34_default_pin: pinmux_P8_34_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_pin: pinmux_P8_34_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_pu_pin: pinmux_P8_34_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_pd_pin: pinmux_P8_34_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_input_pin: pinmux_P8_34_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_pwm_pin: pinmux_P8_34_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data11.ehrpwm1b */ + + /* P8_35 (ZCZ ball V2) hdmi */ + P8_35_default_pin: pinmux_P8_35_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_pin: pinmux_P8_35_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_pu_pin: pinmux_P8_35_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_pd_pin: pinmux_P8_35_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_input_pin: pinmux_P8_35_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_qep_pin: pinmux_P8_35_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data12.eqep1a_in */ + + /* P8_36 (ZCZ ball U3) hdmi */ + P8_36_default_pin: pinmux_P8_36_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_pin: pinmux_P8_36_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_pu_pin: pinmux_P8_36_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_pd_pin: pinmux_P8_36_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_input_pin: pinmux_P8_36_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_pwm_pin: pinmux_P8_36_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data10.ehrpwm1a */ + + /* P8_37 (ZCZ ball U1) hdmi */ + P8_37_default_pin: pinmux_P8_37_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_pin: pinmux_P8_37_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_pu_pin: pinmux_P8_37_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_pd_pin: pinmux_P8_37_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_input_pin: pinmux_P8_37_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_pwm_pin: pinmux_P8_37_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data8.ehrpwm1_tripzone_input */ + P8_37_uart_pin: pinmux_P8_37_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* lcd_data8.uart5_txd */ + + /* P8_38 (ZCZ ball U2) hdmi */ + P8_38_default_pin: pinmux_P8_38_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_pin: pinmux_P8_38_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_pu_pin: pinmux_P8_38_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_pd_pin: pinmux_P8_38_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_input_pin: pinmux_P8_38_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_pwm_pin: pinmux_P8_38_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data9.ehrpwm0_synco */ + P8_38_uart_pin: pinmux_P8_38_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* lcd_data9.uart5_rxd */ + + /* P8_39 (ZCZ ball T3) hdmi */ + P8_39_default_pin: pinmux_P8_39_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_pin: pinmux_P8_39_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_pu_pin: pinmux_P8_39_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_pd_pin: pinmux_P8_39_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_input_pin: pinmux_P8_39_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_qep_pin: pinmux_P8_39_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data6.eqep2_index */ + P8_39_pruout_pin: pinmux_P8_39_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data6.pru1_out6 */ + P8_39_pruin_pin: pinmux_P8_39_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data6.pru1_in6 */ + + /* P8_40 (ZCZ ball T4) hdmi */ + P8_40_default_pin: pinmux_P8_40_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_pin: pinmux_P8_40_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_pu_pin: pinmux_P8_40_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_pd_pin: pinmux_P8_40_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_input_pin: pinmux_P8_40_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_qep_pin: pinmux_P8_40_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data7.eqep2_strobe */ + P8_40_pruout_pin: pinmux_P8_40_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data7.pru1_out7 */ + P8_40_pruin_pin: pinmux_P8_40_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data7.pru1_in7 */ + + /* P8_41 (ZCZ ball T1) hdmi */ + P8_41_default_pin: pinmux_P8_41_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_pin: pinmux_P8_41_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_pu_pin: pinmux_P8_41_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_pd_pin: pinmux_P8_41_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_input_pin: pinmux_P8_41_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_qep_pin: pinmux_P8_41_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data4.eqep2a_in */ + P8_41_pruout_pin: pinmux_P8_41_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data4.pru1_out4 */ + P8_41_pruin_pin: pinmux_P8_41_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data4.pru1_in4 */ + + /* P8_42 (ZCZ ball T2) hdmi */ + P8_42_default_pin: pinmux_P8_42_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_pin: pinmux_P8_42_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_pu_pin: pinmux_P8_42_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_pd_pin: pinmux_P8_42_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_input_pin: pinmux_P8_42_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_qep_pin: pinmux_P8_42_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data5.eqep2b_in */ + P8_42_pruout_pin: pinmux_P8_42_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data5.pru1_out5 */ + P8_42_pruin_pin: pinmux_P8_42_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data5.pru1_in5 */ + + /* P8_43 (ZCZ ball R3) hdmi */ + P8_43_default_pin: pinmux_P8_43_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_pin: pinmux_P8_43_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_pu_pin: pinmux_P8_43_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_pd_pin: pinmux_P8_43_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_input_pin: pinmux_P8_43_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_pwm_pin: pinmux_P8_43_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data2.ehrpwm2_tripzone_input */ + P8_43_pruout_pin: pinmux_P8_43_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data2.pru1_out2 */ + P8_43_pruin_pin: pinmux_P8_43_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data2.pru1_in2 */ + + /* P8_44 (ZCZ ball R4) hdmi */ + P8_44_default_pin: pinmux_P8_44_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_pin: pinmux_P8_44_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_pu_pin: pinmux_P8_44_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_pd_pin: pinmux_P8_44_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_input_pin: pinmux_P8_44_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_pwm_pin: pinmux_P8_44_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data3.ehrpwm0_synco */ + P8_44_pruout_pin: pinmux_P8_44_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data3.pru1_out3 */ + P8_44_pruin_pin: pinmux_P8_44_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data3.pru1_in3 */ + + /* P8_45 (ZCZ ball R1) hdmi */ + P8_45_default_pin: pinmux_P8_45_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_pin: pinmux_P8_45_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_pu_pin: pinmux_P8_45_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_pd_pin: pinmux_P8_45_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_input_pin: pinmux_P8_45_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_pwm_pin: pinmux_P8_45_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data0.ehrpwm2a */ + P8_45_pruout_pin: pinmux_P8_45_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data0.pru1_out0 */ + P8_45_pruin_pin: pinmux_P8_45_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data0.pru1_in0 */ + + /* P8_46 (ZCZ ball R2) hdmi */ + P8_46_default_pin: pinmux_P8_46_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_pin: pinmux_P8_46_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_pu_pin: pinmux_P8_46_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_pd_pin: pinmux_P8_46_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_input_pin: pinmux_P8_46_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_pwm_pin: pinmux_P8_46_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data1.ehrpwm2b */ + P8_46_pruout_pin: pinmux_P8_46_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data1.pru1_out1 */ + P8_46_pruin_pin: pinmux_P8_46_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data1.pru1_in1 */ + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + + /* P9_02 GND */ + + /* P9_03 3V3 */ + + /* P9_04 3V3 */ + + /* P9_05 VDD_5V */ + + /* P9_06 VDD_5V */ + + /* P9_07 SYS_5V */ + + /* P9_08 SYS_5V */ + + /* P9_09 PWR_BUT */ + + /* P9_10 RSTn */ + + /* P9_11 (ZCZ ball T17) gpio0_30 */ + P9_11_default_pin: pinmux_P9_11_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_pin: pinmux_P9_11_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_input_pin: pinmux_P9_11_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_uart_pin: pinmux_P9_11_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wait0.uart4_rxd */ + + /* P9_12 (ZCZ ball U18) gpio1_28 */ + P9_12_default_pin: pinmux_P9_12_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_pin: pinmux_P9_12_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_pu_pin: pinmux_P9_12_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_pd_pin: pinmux_P9_12_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_input_pin: pinmux_P9_12_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + + /* P9_13 (ZCZ ball U17) gpio0_31 */ + P9_13_default_pin: pinmux_P9_13_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_pin: pinmux_P9_13_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_pu_pin: pinmux_P9_13_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_pd_pin: pinmux_P9_13_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_input_pin: pinmux_P9_13_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_uart_pin: pinmux_P9_13_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wpn.uart4_txd */ + + /* P9_14 (ZCZ ball U14) gpio1_18 */ + P9_14_default_pin: pinmux_P9_14_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_pin: pinmux_P9_14_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_pu_pin: pinmux_P9_14_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_pd_pin: pinmux_P9_14_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_input_pin: pinmux_P9_14_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_pwm_pin: pinmux_P9_14_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a2.ehrpwm1a */ + + /* P9_15 (ZCZ ball R13) gpio1_16 */ + P9_15_default_pin: pinmux_P9_15_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_pin: pinmux_P9_15_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_pu_pin: pinmux_P9_15_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_pd_pin: pinmux_P9_15_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_input_pin: pinmux_P9_15_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_pwm_pin: pinmux_P9_15_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a0.ehrpwm1_tripzone_input */ + + /* P9_16 (ZCZ ball T14) gpio1_19 */ + P9_16_default_pin: pinmux_P9_16_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_pin: pinmux_P9_16_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_pu_pin: pinmux_P9_16_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_pd_pin: pinmux_P9_16_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_input_pin: pinmux_P9_16_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_pwm_pin: pinmux_P9_16_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a3.ehrpwm1b */ + + /* P9_17 (ZCZ ball A16) gpio0_5 */ + P9_17_default_pin: pinmux_P9_17_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_pin: pinmux_P9_17_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_pu_pin: pinmux_P9_17_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_pd_pin: pinmux_P9_17_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_input_pin: pinmux_P9_17_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_INPUT | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_spi_cs_pin: pinmux_P9_17_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_cs0.spi0_cs0 */ + P9_17_i2c_pin: pinmux_P9_17_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_cs0.i2c1_scl */ + P9_17_pwm_pin: pinmux_P9_17_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_cs0.ehrpwm0_synci */ + P9_17_pru_uart_pin: pinmux_P9_17_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_cs0.pr1_uart0_txd */ + + /* P9_18 (ZCZ ball B16) gpio0_4 */ + P9_18_default_pin: pinmux_P9_18_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_pin: pinmux_P9_18_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_pu_pin: pinmux_P9_18_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_pd_pin: pinmux_P9_18_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_input_pin: pinmux_P9_18_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_INPUT | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_spi_pin: pinmux_P9_18_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d1.spi0_d1 */ + P9_18_i2c_pin: pinmux_P9_18_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_d1.i2c1_sda */ + P9_18_pwm_pin: pinmux_P9_18_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_d1.ehrpwm0_tripzone_input */ + P9_18_pru_uart_pin: pinmux_P9_18_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_d1.pr1_uart0_rxd */ + + /* P9_19 (ZCZ ball D17) i2c2_scl */ + P9_19_default_pin: pinmux_P9_19_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */ + P9_19_gpio_pin: pinmux_P9_19_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_gpio_pu_pin: pinmux_P9_19_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_gpio_pd_pin: pinmux_P9_19_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_gpio_input_pin: pinmux_P9_19_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_INPUT | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_timer_pin: pinmux_P9_19_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart1_rtsn.timer5 */ + P9_19_can_pin: pinmux_P9_19_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart1_rtsn.dcan0_rx */ + P9_19_i2c_pin: pinmux_P9_19_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */ + P9_19_spi_cs_pin: pinmux_P9_19_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_rtsn.spi1_cs1 */ + P9_19_pru_uart_pin: pinmux_P9_19_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_rtsn.pr1_uart0_rts_n */ + + /* P9_20 (ZCZ ball D18) i2c2_sda */ + P9_20_default_pin: pinmux_P9_20_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */ + P9_20_gpio_pin: pinmux_P9_20_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_gpio_pu_pin: pinmux_P9_20_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_gpio_pd_pin: pinmux_P9_20_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_gpio_input_pin: pinmux_P9_20_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_INPUT | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_timer_pin: pinmux_P9_20_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart1_ctsn.timer6 */ + P9_20_can_pin: pinmux_P9_20_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart1_ctsn.dcan0_tx */ + P9_20_i2c_pin: pinmux_P9_20_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */ + P9_20_spi_cs_pin: pinmux_P9_20_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_ctsn.spi1_cs0 */ + P9_20_pru_uart_pin: pinmux_P9_20_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_ctsn.pr1_uart0_cts_n */ + + /* P9_21 (ZCZ ball B17) gpio0_3 */ + P9_21_default_pin: pinmux_P9_21_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_pin: pinmux_P9_21_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_pu_pin: pinmux_P9_21_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_pd_pin: pinmux_P9_21_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_input_pin: pinmux_P9_21_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_INPUT | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_spi_pin: pinmux_P9_21_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d0.spi0_d0 */ + P9_21_uart_pin: pinmux_P9_21_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* spi0_d0.uart2_txd */ + P9_21_i2c_pin: pinmux_P9_21_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_d0.i2c2_scl */ + P9_21_pwm_pin: pinmux_P9_21_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_d0.ehrpwm0b */ + P9_21_pru_uart_pin: pinmux_P9_21_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_d0.pr1_uart0_rts_n */ + + /* P9_22 (ZCZ ball A17) gpio0_2 */ + P9_22_default_pin: pinmux_P9_22_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_pin: pinmux_P9_22_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_pu_pin: pinmux_P9_22_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_pd_pin: pinmux_P9_22_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_input_pin: pinmux_P9_22_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_INPUT | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_spi_sclk_pin: pinmux_P9_22_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_sclk.spi0_sclk */ + P9_22_uart_pin: pinmux_P9_22_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* spi0_sclk.uart2_rxd */ + P9_22_i2c_pin: pinmux_P9_22_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_sclk.i2c2_sda */ + P9_22_pwm_pin: pinmux_P9_22_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_sclk.ehrpwm0a */ + P9_22_pru_uart_pin: pinmux_P9_22_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_sclk.pr1_uart0_cts_n */ + + /* P9_23 (ZCZ ball V14) gpio1_17 */ + P9_23_default_pin: pinmux_P9_23_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_pin: pinmux_P9_23_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_input_pin: pinmux_P9_23_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_pwm_pin: pinmux_P9_23_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a1.ehrpwm0_synco */ + + /* P9_24 (ZCZ ball D15) gpio0_15 */ + P9_24_default_pin: pinmux_P9_24_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_pin: pinmux_P9_24_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_pu_pin: pinmux_P9_24_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_pd_pin: pinmux_P9_24_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_input_pin: pinmux_P9_24_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_uart_pin: pinmux_P9_24_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart1_txd.uart1_txd */ + P9_24_can_pin: pinmux_P9_24_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart1_txd.dcan1_rx */ + P9_24_i2c_pin: pinmux_P9_24_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_txd.i2c1_scl */ + P9_24_pru_uart_pin: pinmux_P9_24_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_txd.pr1_uart0_txd */ + P9_24_pruin_pin: pinmux_P9_24_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE6) >; }; /* uart1_txd.pru0_in16 */ + + /* P9_25 (ZCZ ball A14) audio */ + P9_25_default_pin: pinmux_P9_25_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_pin: pinmux_P9_25_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_pu_pin: pinmux_P9_25_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_pd_pin: pinmux_P9_25_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_input_pin: pinmux_P9_25_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_qep_pin: pinmux_P9_25_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_ahclkx.eqep0_strobe */ + P9_25_pruout_pin: pinmux_P9_25_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_ahclkx.pru0_out7 */ + P9_25_pruin_pin: pinmux_P9_25_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkx.pru0_in7 */ + + /* P9_26 (ZCZ ball D16) gpio0_14 */ + P9_26_default_pin: pinmux_P9_26_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_pin: pinmux_P9_26_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_pu_pin: pinmux_P9_26_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_pd_pin: pinmux_P9_26_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_input_pin: pinmux_P9_26_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_uart_pin: pinmux_P9_26_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart1_rxd.uart1_rxd */ + P9_26_can_pin: pinmux_P9_26_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart1_rxd.dcan1_tx */ + P9_26_i2c_pin: pinmux_P9_26_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rxd.i2c1_sda */ + P9_26_pru_uart_pin: pinmux_P9_26_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_rxd.pr1_uart0_rxd */ + P9_26_pruin_pin: pinmux_P9_26_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE6) >; }; /* uart1_rxd.pru1_in16 */ + + /* P9_27 (ZCZ ball C13) gpio3_19 */ + P9_27_default_pin: pinmux_P9_27_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_pin: pinmux_P9_27_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_pu_pin: pinmux_P9_27_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_pd_pin: pinmux_P9_27_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_input_pin: pinmux_P9_27_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_qep_pin: pinmux_P9_27_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_fsr.eqep0b_in */ + P9_27_pruout_pin: pinmux_P9_27_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_fsr.pru0_out5 */ + P9_27_pruin_pin: pinmux_P9_27_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsr.pru0_in5 */ + + /* P9_28 (ZCZ ball C12) audio */ + P9_28_default_pin: pinmux_P9_28_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_pin: pinmux_P9_28_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_input_pin: pinmux_P9_28_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_pwm_pin: pinmux_P9_28_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_ahclkr.ehrpwm0_synci */ + P9_28_spi_cs_pin: pinmux_P9_28_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_ahclkr.spi1_cs0 */ + P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* mcasp0_ahclkr.ecap2_in_pwm2_out */ + P9_28_pruout_pin: pinmux_P9_28_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_ahclkr.pru0_out3 */ + P9_28_pruin_pin: pinmux_P9_28_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkr.pru0_in3 */ + + /* P9_29 (ZCZ ball B13) audio */ + P9_29_default_pin: pinmux_P9_29_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_pin: pinmux_P9_29_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_pu_pin: pinmux_P9_29_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_pd_pin: pinmux_P9_29_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_input_pin: pinmux_P9_29_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_pwm_pin: pinmux_P9_29_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_fsx.ehrpwm0b */ + P9_29_spi_pin: pinmux_P9_29_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_fsx.spi1_d0 */ + P9_29_pruout_pin: pinmux_P9_29_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_fsx.pru0_out1 */ + P9_29_pruin_pin: pinmux_P9_29_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsx.pru0_in1 */ + + /* P9_30 (ZCZ ball D12) gpio3_16 */ + P9_30_default_pin: pinmux_P9_30_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P9_30_gpio_pin: pinmux_P9_30_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P9_30_gpio_pu_pin: pinmux_P9_30_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P9_30_gpio_pd_pin: pinmux_P9_30_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P9_30_gpio_input_pin: pinmux_P9_30_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P9_30_pwm_pin: pinmux_P9_30_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_axr0.ehrpwm0_tripzone_input */ + P9_30_spi_pin: pinmux_P9_30_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_axr0.spi1_d1 */ + P9_30_pruout_pin: pinmux_P9_30_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_axr0.pru0_out2 */ + P9_30_pruin_pin: pinmux_P9_30_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr0.pru0_in2 */ + + /* P9_31 (ZCZ ball A13) audio */ + P9_31_default_pin: pinmux_P9_31_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_pin: pinmux_P9_31_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_pu_pin: pinmux_P9_31_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_pd_pin: pinmux_P9_31_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_input_pin: pinmux_P9_31_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_pwm_pin: pinmux_P9_31_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkx.ehrpwm0a */ + P9_31_spi_sclk_pin: pinmux_P9_31_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_aclkx.spi1_sclk */ + P9_31_pruout_pin: pinmux_P9_31_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_aclkx.pru0_out0 */ + P9_31_pruin_pin: pinmux_P9_31_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkx.pru0_in0 */ + + /* P9_32 VADC */ + + /* P9_33 (ZCZ ball C8) AIN4 */ + + /* P9_34 AGND */ + + /* P9_35 (ZCZ ball A8) AIN6 */ + + /* P9_36 (ZCZ ball B8) AIN5 */ + + /* P9_37 (ZCZ ball B7) AIN2 */ + + /* P9_38 (ZCZ ball A7) AIN3 */ + + /* P9_39 (ZCZ ball B6) AIN0 */ + + /* P9_40 (ZCZ ball C7) AIN1 */ + + /* P9_41 (ZCZ ball D14) gpio0_20 */ + P9_41_default_pin: pinmux_P9_41_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_pin: pinmux_P9_41_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_pu_pin: pinmux_P9_41_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_pd_pin: pinmux_P9_41_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_input_pin: pinmux_P9_41_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_timer_pin: pinmux_P9_41_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* xdma_event_intr1.timer7 */ + P9_41_pruin_pin: pinmux_P9_41_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE5) >; }; /* xdma_event_intr1.pru0_in16 */ + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) gpio3_20 */ + P9_91_default_pin: pinmux_P9_91_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_pin: pinmux_P9_91_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_pu_pin: pinmux_P9_91_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_pd_pin: pinmux_P9_91_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_input_pin: pinmux_P9_91_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_qep_pin: pinmux_P9_91_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_axr1.eqep0_index */ + P9_91_pruout_pin: pinmux_P9_91_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_axr1.pru0_out6 */ + P9_91_pruin_pin: pinmux_P9_91_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr1.pru0_in6 */ + + /* P9_42 (ZCZ ball C18) gpio0_7 */ + P9_42_default_pin: pinmux_P9_42_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_pin: pinmux_P9_42_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_pu_pin: pinmux_P9_42_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_pd_pin: pinmux_P9_42_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_input_pin: pinmux_P9_42_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_INPUT | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_pwm_pin: pinmux_P9_42_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE0) >; }; /* eCAP0_in_PWM0_out.ecap0_in_pwm0_out */ + P9_42_uart_pin: pinmux_P9_42_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* eCAP0_in_PWM0_out.uart3_txd */ + P9_42_spi_cs_pin: pinmux_P9_42_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* eCAP0_in_PWM0_out.spi1_cs1 */ + P9_42_pru_ecap_pin: pinmux_P9_42_pru_ecap_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* eCAP0_in_PWM0_out.pr1_ecap0_ecap_capin_apwm_o */ + P9_42_spi_sclk_pin: pinmux_P9_42_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* eCAP0_in_PWM0_out.spi1_sclk */ + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) gpio3_18 */ + P9_92_default_pin: pinmux_P9_92_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_pin: pinmux_P9_92_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_pu_pin: pinmux_P9_92_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_pd_pin: pinmux_P9_92_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_input_pin: pinmux_P9_92_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_qep_pin: pinmux_P9_92_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkr.eqep0a_in */ + P9_92_pruout_pin: pinmux_P9_92_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_aclkr.pru0_out4 */ + P9_92_pruin_pin: pinmux_P9_92_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkr.pru0_in4 */ + + /* P9_43 GND */ + + /* P9_44 GND */ + + /* P9_45 GND */ + + /* P9_46 GND */ +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + clock-frequency = <100000>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + clock-frequency = <100000>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart5 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&dcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&eqep0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ +}; + +&eqep1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ +}; + +&eqep2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ +}; + +&epwmss0 { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ehrpwm1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ehrpwm2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ecap0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ecap1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ecap2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + + reg = <0>; + spi-max-frequency = <16000000>; + spi-cpha; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + + reg = <1>; + spi-max-frequency = <16000000>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + + reg = <0>; + spi-max-frequency = <16000000>; + spi-cpha; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + + reg = <1>; + spi-max-frequency = <16000000>; + }; +}; + +/**********************************************************************/ +/* Pin Multiplex Helpers */ +/* */ +/* These provide userspace runtime pin configuration for the */ +/* BeagleBone cape expansion headers */ +/**********************************************************************/ + +&ocp { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + + /* P8_02 GND */ + + + /* P8_03 (ZCZ ball R9) emmc */ + P8_03_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_03_default_pin>; + pinctrl-1 = <&P8_03_gpio_pin>; + pinctrl-2 = <&P8_03_gpio_pu_pin>; + pinctrl-3 = <&P8_03_gpio_pd_pin>; + pinctrl-4 = <&P8_03_gpio_input_pin>; + }; + + /* P8_04 (ZCZ ball T9) emmc */ + P8_04_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_04_default_pin>; + pinctrl-1 = <&P8_04_gpio_pin>; + pinctrl-2 = <&P8_04_gpio_pu_pin>; + pinctrl-3 = <&P8_04_gpio_pd_pin>; + pinctrl-4 = <&P8_04_gpio_input_pin>; + }; + + /* P8_05 (ZCZ ball R8) emmc */ + P8_05_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_05_default_pin>; + pinctrl-1 = <&P8_05_gpio_pin>; + pinctrl-2 = <&P8_05_gpio_pu_pin>; + pinctrl-3 = <&P8_05_gpio_pd_pin>; + pinctrl-4 = <&P8_05_gpio_input_pin>; + }; + + /* P8_06 (ZCZ ball T8) emmc */ + P8_06_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_06_default_pin>; + pinctrl-1 = <&P8_06_gpio_pin>; + pinctrl-2 = <&P8_06_gpio_pu_pin>; + pinctrl-3 = <&P8_06_gpio_pd_pin>; + pinctrl-4 = <&P8_06_gpio_input_pin>; + }; + + /* P8_07 (ZCZ ball R7) */ + P8_07_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_07_default_pin>; + pinctrl-1 = <&P8_07_gpio_pin>; + pinctrl-2 = <&P8_07_gpio_pu_pin>; + pinctrl-3 = <&P8_07_gpio_pd_pin>; + pinctrl-4 = <&P8_07_gpio_input_pin>; + pinctrl-5 = <&P8_07_timer_pin>; + }; + + /* P8_08 (ZCZ ball T7) */ + P8_08_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_08_default_pin>; + pinctrl-1 = <&P8_08_gpio_pin>; + pinctrl-2 = <&P8_08_gpio_pu_pin>; + pinctrl-3 = <&P8_08_gpio_pd_pin>; + pinctrl-4 = <&P8_08_gpio_input_pin>; + pinctrl-5 = <&P8_08_timer_pin>; + }; + + /* P8_09 (ZCZ ball T6) */ + P8_09_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_09_default_pin>; + pinctrl-1 = <&P8_09_gpio_pin>; + pinctrl-2 = <&P8_09_gpio_pu_pin>; + pinctrl-3 = <&P8_09_gpio_pd_pin>; + pinctrl-4 = <&P8_09_gpio_input_pin>; + pinctrl-5 = <&P8_09_timer_pin>; + }; + + /* P8_10 (ZCZ ball U6) */ + P8_10_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_10_default_pin>; + pinctrl-1 = <&P8_10_gpio_pin>; + pinctrl-2 = <&P8_10_gpio_pu_pin>; + pinctrl-3 = <&P8_10_gpio_pd_pin>; + pinctrl-4 = <&P8_10_gpio_input_pin>; + pinctrl-5 = <&P8_10_timer_pin>; + }; + + /* P8_11 (ZCZ ball R12) */ + P8_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout"; + pinctrl-0 = <&P8_11_default_pin>; + pinctrl-1 = <&P8_11_gpio_pin>; + pinctrl-2 = <&P8_11_gpio_pu_pin>; + pinctrl-3 = <&P8_11_gpio_pd_pin>; + pinctrl-4 = <&P8_11_gpio_input_pin>; + pinctrl-5 = <&P8_11_qep_pin>; + pinctrl-6 = <&P8_11_pruout_pin>; + }; + + /* P8_12 (ZCZ ball T12) */ + P8_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout"; + pinctrl-0 = <&P8_12_default_pin>; + pinctrl-1 = <&P8_12_gpio_pin>; + pinctrl-2 = <&P8_12_gpio_pu_pin>; + pinctrl-3 = <&P8_12_gpio_pd_pin>; + pinctrl-4 = <&P8_12_gpio_input_pin>; + pinctrl-5 = <&P8_12_qep_pin>; + pinctrl-6 = <&P8_12_pruout_pin>; + }; + + /* P8_13 (ZCZ ball T10) */ + P8_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_13_default_pin>; + pinctrl-1 = <&P8_13_gpio_pin>; + pinctrl-2 = <&P8_13_gpio_pu_pin>; + pinctrl-3 = <&P8_13_gpio_pd_pin>; + pinctrl-4 = <&P8_13_gpio_input_pin>; + pinctrl-5 = <&P8_13_pwm_pin>; + }; + + /* P8_14 (ZCZ ball T11) */ + P8_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_14_default_pin>; + pinctrl-1 = <&P8_14_gpio_pin>; + pinctrl-2 = <&P8_14_gpio_pu_pin>; + pinctrl-3 = <&P8_14_gpio_pd_pin>; + pinctrl-4 = <&P8_14_gpio_input_pin>; + pinctrl-5 = <&P8_14_pwm_pin>; + }; + + /* P8_15 (ZCZ ball U13) */ + P8_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pru_ecap", "pruin"; + pinctrl-0 = <&P8_15_default_pin>; + pinctrl-1 = <&P8_15_gpio_pin>; + pinctrl-2 = <&P8_15_gpio_pu_pin>; + pinctrl-3 = <&P8_15_gpio_pd_pin>; + pinctrl-4 = <&P8_15_gpio_input_pin>; + pinctrl-5 = <&P8_15_qep_pin>; + pinctrl-6 = <&P8_15_pru_ecap_pin>; + pinctrl-7 = <&P8_15_pruin_pin>; + }; + + /* P8_16 (ZCZ ball V13) */ + P8_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruin"; + pinctrl-0 = <&P8_16_default_pin>; + pinctrl-1 = <&P8_16_gpio_pin>; + pinctrl-2 = <&P8_16_gpio_pu_pin>; + pinctrl-3 = <&P8_16_gpio_pd_pin>; + pinctrl-4 = <&P8_16_gpio_input_pin>; + pinctrl-5 = <&P8_16_qep_pin>; + pinctrl-6 = <&P8_16_pruin_pin>; + }; + + /* P8_17 (ZCZ ball U12) */ + P8_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_17_default_pin>; + pinctrl-1 = <&P8_17_gpio_pin>; + pinctrl-2 = <&P8_17_gpio_pu_pin>; + pinctrl-3 = <&P8_17_gpio_pd_pin>; + pinctrl-4 = <&P8_17_gpio_input_pin>; + pinctrl-5 = <&P8_17_pwm_pin>; + }; + + /* P8_18 (ZCZ ball V12) */ + P8_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_18_default_pin>; + pinctrl-1 = <&P8_18_gpio_pin>; + pinctrl-2 = <&P8_18_gpio_pu_pin>; + pinctrl-3 = <&P8_18_gpio_pd_pin>; + pinctrl-4 = <&P8_18_gpio_input_pin>; + }; + + /* P8_19 (ZCZ ball U10) */ + P8_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_19_default_pin>; + pinctrl-1 = <&P8_19_gpio_pin>; + pinctrl-2 = <&P8_19_gpio_pu_pin>; + pinctrl-3 = <&P8_19_gpio_pd_pin>; + pinctrl-4 = <&P8_19_gpio_input_pin>; + pinctrl-5 = <&P8_19_pwm_pin>; + }; + + /* P8_20 (ZCZ ball V9) emmc */ + P8_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_20_default_pin>; + pinctrl-1 = <&P8_20_gpio_pin>; + pinctrl-2 = <&P8_20_gpio_pu_pin>; + pinctrl-3 = <&P8_20_gpio_pd_pin>; + pinctrl-4 = <&P8_20_gpio_input_pin>; + pinctrl-5 = <&P8_20_pruout_pin>; + pinctrl-6 = <&P8_20_pruin_pin>; + }; + + /* P8_21 (ZCZ ball U9) emmc */ + P8_21_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_21_default_pin>; + pinctrl-1 = <&P8_21_gpio_pin>; + pinctrl-2 = <&P8_21_gpio_pu_pin>; + pinctrl-3 = <&P8_21_gpio_pd_pin>; + pinctrl-4 = <&P8_21_gpio_input_pin>; + pinctrl-5 = <&P8_21_pruout_pin>; + pinctrl-6 = <&P8_21_pruin_pin>; + }; + + /* P8_22 (ZCZ ball V8) emmc */ + P8_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_22_default_pin>; + pinctrl-1 = <&P8_22_gpio_pin>; + pinctrl-2 = <&P8_22_gpio_pu_pin>; + pinctrl-3 = <&P8_22_gpio_pd_pin>; + pinctrl-4 = <&P8_22_gpio_input_pin>; + }; + + /* P8_23 (ZCZ ball U8) emmc */ + P8_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_23_default_pin>; + pinctrl-1 = <&P8_23_gpio_pin>; + pinctrl-2 = <&P8_23_gpio_pu_pin>; + pinctrl-3 = <&P8_23_gpio_pd_pin>; + pinctrl-4 = <&P8_23_gpio_input_pin>; + }; + + /* P8_24 (ZCZ ball V7) emmc */ + P8_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_24_default_pin>; + pinctrl-1 = <&P8_24_gpio_pin>; + pinctrl-2 = <&P8_24_gpio_pu_pin>; + pinctrl-3 = <&P8_24_gpio_pd_pin>; + pinctrl-4 = <&P8_24_gpio_input_pin>; + }; + + /* P8_25 (ZCZ ball U7) emmc */ + P8_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_25_default_pin>; + pinctrl-1 = <&P8_25_gpio_pin>; + pinctrl-2 = <&P8_25_gpio_pu_pin>; + pinctrl-3 = <&P8_25_gpio_pd_pin>; + pinctrl-4 = <&P8_25_gpio_input_pin>; + }; + + /* P8_26 (ZCZ ball V6) */ + P8_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_26_default_pin>; + pinctrl-1 = <&P8_26_gpio_pin>; + pinctrl-2 = <&P8_26_gpio_pu_pin>; + pinctrl-3 = <&P8_26_gpio_pd_pin>; + pinctrl-4 = <&P8_26_gpio_input_pin>; + }; + + /* P8_27 (ZCZ ball U5) hdmi */ + P8_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_27_default_pin>; + pinctrl-1 = <&P8_27_gpio_pin>; + pinctrl-2 = <&P8_27_gpio_pu_pin>; + pinctrl-3 = <&P8_27_gpio_pd_pin>; + pinctrl-4 = <&P8_27_gpio_input_pin>; + pinctrl-5 = <&P8_27_pruout_pin>; + pinctrl-6 = <&P8_27_pruin_pin>; + }; + + /* P8_28 (ZCZ ball V5) hdmi */ + P8_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_28_default_pin>; + pinctrl-1 = <&P8_28_gpio_pin>; + pinctrl-2 = <&P8_28_gpio_pu_pin>; + pinctrl-3 = <&P8_28_gpio_pd_pin>; + pinctrl-4 = <&P8_28_gpio_input_pin>; + pinctrl-5 = <&P8_28_pruout_pin>; + pinctrl-6 = <&P8_28_pruin_pin>; + }; + + /* P8_29 (ZCZ ball R5) hdmi */ + P8_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_29_default_pin>; + pinctrl-1 = <&P8_29_gpio_pin>; + pinctrl-2 = <&P8_29_gpio_pu_pin>; + pinctrl-3 = <&P8_29_gpio_pd_pin>; + pinctrl-4 = <&P8_29_gpio_input_pin>; + pinctrl-5 = <&P8_29_pruout_pin>; + pinctrl-6 = <&P8_29_pruin_pin>; + }; + + /* P8_30 (ZCZ ball R6) hdmi */ + P8_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_30_default_pin>; + pinctrl-1 = <&P8_30_gpio_pin>; + pinctrl-2 = <&P8_30_gpio_pu_pin>; + pinctrl-3 = <&P8_30_gpio_pd_pin>; + pinctrl-4 = <&P8_30_gpio_input_pin>; + pinctrl-5 = <&P8_30_pruout_pin>; + pinctrl-6 = <&P8_30_pruin_pin>; + }; + + /* P8_31 (ZCZ ball V4) hdmi */ + P8_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "qep"; + pinctrl-0 = <&P8_31_default_pin>; + pinctrl-1 = <&P8_31_gpio_pin>; + pinctrl-2 = <&P8_31_gpio_pu_pin>; + pinctrl-3 = <&P8_31_gpio_pd_pin>; + pinctrl-4 = <&P8_31_gpio_input_pin>; + pinctrl-5 = <&P8_31_uart_pin>; + pinctrl-6 = <&P8_31_qep_pin>; + }; + + /* P8_32 (ZCZ ball T5) hdmi */ + P8_32_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P8_32_default_pin>; + pinctrl-1 = <&P8_32_gpio_pin>; + pinctrl-2 = <&P8_32_gpio_pu_pin>; + pinctrl-3 = <&P8_32_gpio_pd_pin>; + pinctrl-4 = <&P8_32_gpio_input_pin>; + pinctrl-5 = <&P8_32_qep_pin>; + }; + + /* P8_33 (ZCZ ball V3) hdmi */ + P8_33_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P8_33_default_pin>; + pinctrl-1 = <&P8_33_gpio_pin>; + pinctrl-2 = <&P8_33_gpio_pu_pin>; + pinctrl-3 = <&P8_33_gpio_pd_pin>; + pinctrl-4 = <&P8_33_gpio_input_pin>; + pinctrl-5 = <&P8_33_qep_pin>; + }; + + /* P8_34 (ZCZ ball U4) hdmi */ + P8_34_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_34_default_pin>; + pinctrl-1 = <&P8_34_gpio_pin>; + pinctrl-2 = <&P8_34_gpio_pu_pin>; + pinctrl-3 = <&P8_34_gpio_pd_pin>; + pinctrl-4 = <&P8_34_gpio_input_pin>; + pinctrl-5 = <&P8_34_pwm_pin>; + }; + + /* P8_35 (ZCZ ball V2) hdmi */ + P8_35_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P8_35_default_pin>; + pinctrl-1 = <&P8_35_gpio_pin>; + pinctrl-2 = <&P8_35_gpio_pu_pin>; + pinctrl-3 = <&P8_35_gpio_pd_pin>; + pinctrl-4 = <&P8_35_gpio_input_pin>; + pinctrl-5 = <&P8_35_qep_pin>; + }; + + /* P8_36 (ZCZ ball U3) hdmi */ + P8_36_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_36_default_pin>; + pinctrl-1 = <&P8_36_gpio_pin>; + pinctrl-2 = <&P8_36_gpio_pu_pin>; + pinctrl-3 = <&P8_36_gpio_pd_pin>; + pinctrl-4 = <&P8_36_gpio_input_pin>; + pinctrl-5 = <&P8_36_pwm_pin>; + }; + + /* P8_37 (ZCZ ball U1) hdmi */ + P8_37_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "pwm"; + pinctrl-0 = <&P8_37_default_pin>; + pinctrl-1 = <&P8_37_gpio_pin>; + pinctrl-2 = <&P8_37_gpio_pu_pin>; + pinctrl-3 = <&P8_37_gpio_pd_pin>; + pinctrl-4 = <&P8_37_gpio_input_pin>; + pinctrl-5 = <&P8_37_uart_pin>; + pinctrl-6 = <&P8_37_pwm_pin>; + }; + + /* P8_38 (ZCZ ball U2) hdmi */ + P8_38_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "pwm"; + pinctrl-0 = <&P8_38_default_pin>; + pinctrl-1 = <&P8_38_gpio_pin>; + pinctrl-2 = <&P8_38_gpio_pu_pin>; + pinctrl-3 = <&P8_38_gpio_pd_pin>; + pinctrl-4 = <&P8_38_gpio_input_pin>; + pinctrl-5 = <&P8_38_uart_pin>; + pinctrl-6 = <&P8_38_pwm_pin>; + }; + + /* P8_39 (ZCZ ball T3) hdmi */ + P8_39_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_39_default_pin>; + pinctrl-1 = <&P8_39_gpio_pin>; + pinctrl-2 = <&P8_39_gpio_pu_pin>; + pinctrl-3 = <&P8_39_gpio_pd_pin>; + pinctrl-4 = <&P8_39_gpio_input_pin>; + pinctrl-5 = <&P8_39_qep_pin>; + pinctrl-6 = <&P8_39_pruout_pin>; + pinctrl-7 = <&P8_39_pruin_pin>; + }; + + /* P8_40 (ZCZ ball T4) hdmi */ + P8_40_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_40_default_pin>; + pinctrl-1 = <&P8_40_gpio_pin>; + pinctrl-2 = <&P8_40_gpio_pu_pin>; + pinctrl-3 = <&P8_40_gpio_pd_pin>; + pinctrl-4 = <&P8_40_gpio_input_pin>; + pinctrl-5 = <&P8_40_qep_pin>; + pinctrl-6 = <&P8_40_pruout_pin>; + pinctrl-7 = <&P8_40_pruin_pin>; + }; + + /* P8_41 (ZCZ ball T1) hdmi */ + P8_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_41_default_pin>; + pinctrl-1 = <&P8_41_gpio_pin>; + pinctrl-2 = <&P8_41_gpio_pu_pin>; + pinctrl-3 = <&P8_41_gpio_pd_pin>; + pinctrl-4 = <&P8_41_gpio_input_pin>; + pinctrl-5 = <&P8_41_qep_pin>; + pinctrl-6 = <&P8_41_pruout_pin>; + pinctrl-7 = <&P8_41_pruin_pin>; + }; + + /* P8_42 (ZCZ ball T2) hdmi */ + P8_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_42_default_pin>; + pinctrl-1 = <&P8_42_gpio_pin>; + pinctrl-2 = <&P8_42_gpio_pu_pin>; + pinctrl-3 = <&P8_42_gpio_pd_pin>; + pinctrl-4 = <&P8_42_gpio_input_pin>; + pinctrl-5 = <&P8_42_qep_pin>; + pinctrl-6 = <&P8_42_pruout_pin>; + pinctrl-7 = <&P8_42_pruin_pin>; + }; + + /* P8_43 (ZCZ ball R3) hdmi */ + P8_43_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_43_default_pin>; + pinctrl-1 = <&P8_43_gpio_pin>; + pinctrl-2 = <&P8_43_gpio_pu_pin>; + pinctrl-3 = <&P8_43_gpio_pd_pin>; + pinctrl-4 = <&P8_43_gpio_input_pin>; + pinctrl-5 = <&P8_43_pwm_pin>; + pinctrl-6 = <&P8_43_pruout_pin>; + pinctrl-7 = <&P8_43_pruin_pin>; + }; + + /* P8_44 (ZCZ ball R4) hdmi */ + P8_44_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_44_default_pin>; + pinctrl-1 = <&P8_44_gpio_pin>; + pinctrl-2 = <&P8_44_gpio_pu_pin>; + pinctrl-3 = <&P8_44_gpio_pd_pin>; + pinctrl-4 = <&P8_44_gpio_input_pin>; + pinctrl-5 = <&P8_44_pwm_pin>; + pinctrl-6 = <&P8_44_pruout_pin>; + pinctrl-7 = <&P8_44_pruin_pin>; + }; + + /* P8_45 (ZCZ ball R1) hdmi */ + P8_45_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_45_default_pin>; + pinctrl-1 = <&P8_45_gpio_pin>; + pinctrl-2 = <&P8_45_gpio_pu_pin>; + pinctrl-3 = <&P8_45_gpio_pd_pin>; + pinctrl-4 = <&P8_45_gpio_input_pin>; + pinctrl-5 = <&P8_45_pwm_pin>; + pinctrl-6 = <&P8_45_pruout_pin>; + pinctrl-7 = <&P8_45_pruin_pin>; + }; + + /* P8_46 (ZCZ ball R2) hdmi */ + P8_46_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_46_default_pin>; + pinctrl-1 = <&P8_46_gpio_pin>; + pinctrl-2 = <&P8_46_gpio_pu_pin>; + pinctrl-3 = <&P8_46_gpio_pd_pin>; + pinctrl-4 = <&P8_46_gpio_input_pin>; + pinctrl-5 = <&P8_46_pwm_pin>; + pinctrl-6 = <&P8_46_pruout_pin>; + pinctrl-7 = <&P8_46_pruin_pin>; + }; + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + + /* P9_02 GND */ + + /* P9_03 3V3 */ + + /* P9_04 3V3 */ + + /* P9_05 VDD_5V */ + + /* P9_06 VDD_5V */ + + /* P9_07 SYS_5V */ + + /* P9_08 SYS_5V */ + + /* P9_09 PWR_BUT */ + + /* P9_10 RSTn */ + + /* P9_11 (ZCZ ball T17) */ + P9_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart"; + pinctrl-0 = <&P9_11_default_pin>; + pinctrl-1 = <&P9_11_gpio_pin>; + pinctrl-2 = <&P9_11_gpio_pu_pin>; + pinctrl-3 = <&P9_11_gpio_pd_pin>; + pinctrl-4 = <&P9_11_gpio_input_pin>; + pinctrl-5 = <&P9_11_uart_pin>; + }; + + /* P9_12 (ZCZ ball U18) */ + P9_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P9_12_default_pin>; + pinctrl-1 = <&P9_12_gpio_pin>; + pinctrl-2 = <&P9_12_gpio_pu_pin>; + pinctrl-3 = <&P9_12_gpio_pd_pin>; + pinctrl-4 = <&P9_12_gpio_input_pin>; + }; + + /* P9_13 (ZCZ ball U17) */ + P9_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart"; + pinctrl-0 = <&P9_13_default_pin>; + pinctrl-1 = <&P9_13_gpio_pin>; + pinctrl-2 = <&P9_13_gpio_pu_pin>; + pinctrl-3 = <&P9_13_gpio_pd_pin>; + pinctrl-4 = <&P9_13_gpio_input_pin>; + pinctrl-5 = <&P9_13_uart_pin>; + }; + + /* P9_14 (ZCZ ball U14) */ + P9_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_14_default_pin>; + pinctrl-1 = <&P9_14_gpio_pin>; + pinctrl-2 = <&P9_14_gpio_pu_pin>; + pinctrl-3 = <&P9_14_gpio_pd_pin>; + pinctrl-4 = <&P9_14_gpio_input_pin>; + pinctrl-5 = <&P9_14_pwm_pin>; + }; + + /* P9_15 (ZCZ ball R13) */ + P9_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_15_default_pin>; + pinctrl-1 = <&P9_15_gpio_pin>; + pinctrl-2 = <&P9_15_gpio_pu_pin>; + pinctrl-3 = <&P9_15_gpio_pd_pin>; + pinctrl-4 = <&P9_15_gpio_input_pin>; + pinctrl-5 = <&P9_15_pwm_pin>; + }; + + /* P9_16 (ZCZ ball T14) */ + P9_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_16_default_pin>; + pinctrl-1 = <&P9_16_gpio_pin>; + pinctrl-2 = <&P9_16_gpio_pu_pin>; + pinctrl-3 = <&P9_16_gpio_pd_pin>; + pinctrl-4 = <&P9_16_gpio_input_pin>; + pinctrl-5 = <&P9_16_pwm_pin>; + }; + + /* P9_17 (ZCZ ball A16) */ + P9_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_17_default_pin>; + pinctrl-1 = <&P9_17_gpio_pin>; + pinctrl-2 = <&P9_17_gpio_pu_pin>; + pinctrl-3 = <&P9_17_gpio_pd_pin>; + pinctrl-4 = <&P9_17_gpio_input_pin>; + pinctrl-5 = <&P9_17_spi_cs_pin>; + pinctrl-6 = <&P9_17_i2c_pin>; + pinctrl-7 = <&P9_17_pwm_pin>; + pinctrl-8 = <&P9_17_pru_uart_pin>; + }; + + /* P9_18 (ZCZ ball B16) */ + P9_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_18_default_pin>; + pinctrl-1 = <&P9_18_gpio_pin>; + pinctrl-2 = <&P9_18_gpio_pu_pin>; + pinctrl-3 = <&P9_18_gpio_pd_pin>; + pinctrl-4 = <&P9_18_gpio_input_pin>; + pinctrl-5 = <&P9_18_spi_pin>; + pinctrl-6 = <&P9_18_i2c_pin>; + pinctrl-7 = <&P9_18_pwm_pin>; + pinctrl-8 = <&P9_18_pru_uart_pin>; + }; + + /* P9_19 (ZCZ ball D17) i2c */ + P9_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer"; + pinctrl-0 = <&P9_19_default_pin>; + pinctrl-1 = <&P9_19_gpio_pin>; + pinctrl-2 = <&P9_19_gpio_pu_pin>; + pinctrl-3 = <&P9_19_gpio_pd_pin>; + pinctrl-4 = <&P9_19_gpio_input_pin>; + pinctrl-5 = <&P9_19_spi_cs_pin>; + pinctrl-6 = <&P9_19_can_pin>; + pinctrl-7 = <&P9_19_i2c_pin>; + pinctrl-8 = <&P9_19_pru_uart_pin>; + pinctrl-9 = <&P9_19_timer_pin>; + }; + + /* P9_20 (ZCZ ball D18) i2c */ + P9_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer"; + pinctrl-0 = <&P9_20_default_pin>; + pinctrl-1 = <&P9_20_gpio_pin>; + pinctrl-2 = <&P9_20_gpio_pu_pin>; + pinctrl-3 = <&P9_20_gpio_pd_pin>; + pinctrl-4 = <&P9_20_gpio_input_pin>; + pinctrl-5 = <&P9_20_spi_cs_pin>; + pinctrl-6 = <&P9_20_can_pin>; + pinctrl-7 = <&P9_20_i2c_pin>; + pinctrl-8 = <&P9_20_pru_uart_pin>; + pinctrl-9 = <&P9_20_timer_pin>; + }; + + /* P9_21 (ZCZ ball B17) */ + P9_21_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "uart", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_21_default_pin>; + pinctrl-1 = <&P9_21_gpio_pin>; + pinctrl-2 = <&P9_21_gpio_pu_pin>; + pinctrl-3 = <&P9_21_gpio_pd_pin>; + pinctrl-4 = <&P9_21_gpio_input_pin>; + pinctrl-5 = <&P9_21_spi_pin>; + pinctrl-6 = <&P9_21_uart_pin>; + pinctrl-7 = <&P9_21_i2c_pin>; + pinctrl-8 = <&P9_21_pwm_pin>; + pinctrl-9 = <&P9_21_pru_uart_pin>; + }; + + /* P9_22 (ZCZ ball A17) */ + P9_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "uart", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_22_default_pin>; + pinctrl-1 = <&P9_22_gpio_pin>; + pinctrl-2 = <&P9_22_gpio_pu_pin>; + pinctrl-3 = <&P9_22_gpio_pd_pin>; + pinctrl-4 = <&P9_22_gpio_input_pin>; + pinctrl-5 = <&P9_22_spi_sclk_pin>; + pinctrl-6 = <&P9_22_uart_pin>; + pinctrl-7 = <&P9_22_i2c_pin>; + pinctrl-8 = <&P9_22_pwm_pin>; + pinctrl-9 = <&P9_22_pru_uart_pin>; + }; + + /* P9_23 (ZCZ ball V14) */ + P9_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_23_default_pin>; + pinctrl-1 = <&P9_23_gpio_pin>; + pinctrl-2 = <&P9_23_gpio_pu_pin>; + pinctrl-3 = <&P9_23_gpio_pd_pin>; + pinctrl-4 = <&P9_23_gpio_input_pin>; + pinctrl-5 = <&P9_23_pwm_pin>; + }; + + /* P9_24 (ZCZ ball D15) */ + P9_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin"; + pinctrl-0 = <&P9_24_default_pin>; + pinctrl-1 = <&P9_24_gpio_pin>; + pinctrl-2 = <&P9_24_gpio_pu_pin>; + pinctrl-3 = <&P9_24_gpio_pd_pin>; + pinctrl-4 = <&P9_24_gpio_input_pin>; + pinctrl-5 = <&P9_24_uart_pin>; + pinctrl-6 = <&P9_24_can_pin>; + pinctrl-7 = <&P9_24_i2c_pin>; + pinctrl-8 = <&P9_24_pru_uart_pin>; + pinctrl-9 = <&P9_24_pruin_pin>; + }; + + /* P9_25 (ZCZ ball A14) audio */ + P9_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_25_default_pin>; + pinctrl-1 = <&P9_25_gpio_pin>; + pinctrl-2 = <&P9_25_gpio_pu_pin>; + pinctrl-3 = <&P9_25_gpio_pd_pin>; + pinctrl-4 = <&P9_25_gpio_input_pin>; + pinctrl-5 = <&P9_25_qep_pin>; + pinctrl-6 = <&P9_25_pruout_pin>; + pinctrl-7 = <&P9_25_pruin_pin>; + }; + + /* P9_26 (ZCZ ball D16) */ + P9_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin"; + pinctrl-0 = <&P9_26_default_pin>; + pinctrl-1 = <&P9_26_gpio_pin>; + pinctrl-2 = <&P9_26_gpio_pu_pin>; + pinctrl-3 = <&P9_26_gpio_pd_pin>; + pinctrl-4 = <&P9_26_gpio_input_pin>; + pinctrl-5 = <&P9_26_uart_pin>; + pinctrl-6 = <&P9_26_can_pin>; + pinctrl-7 = <&P9_26_i2c_pin>; + pinctrl-8 = <&P9_26_pru_uart_pin>; + pinctrl-9 = <&P9_26_pruin_pin>; + }; + + /* P9_27 (ZCZ ball C13) */ + P9_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_27_default_pin>; + pinctrl-1 = <&P9_27_gpio_pin>; + pinctrl-2 = <&P9_27_gpio_pu_pin>; + pinctrl-3 = <&P9_27_gpio_pd_pin>; + pinctrl-4 = <&P9_27_gpio_input_pin>; + pinctrl-5 = <&P9_27_qep_pin>; + pinctrl-6 = <&P9_27_pruout_pin>; + pinctrl-7 = <&P9_27_pruin_pin>; + }; + + /* P9_28 (ZCZ ball C12) audio */ + P9_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "pwm", "pwm2", "pruout", "pruin"; + pinctrl-0 = <&P9_28_default_pin>; + pinctrl-1 = <&P9_28_gpio_pin>; + pinctrl-2 = <&P9_28_gpio_pu_pin>; + pinctrl-3 = <&P9_28_gpio_pd_pin>; + pinctrl-4 = <&P9_28_gpio_input_pin>; + pinctrl-5 = <&P9_28_spi_cs_pin>; + pinctrl-6 = <&P9_28_pwm_pin>; + pinctrl-7 = <&P9_28_pwm2_pin>; + pinctrl-8 = <&P9_28_pruout_pin>; + pinctrl-9 = <&P9_28_pruin_pin>; + }; + + /* P9_29 (ZCZ ball B13) audio */ + P9_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P9_29_default_pin>; + pinctrl-1 = <&P9_29_gpio_pin>; + pinctrl-2 = <&P9_29_gpio_pu_pin>; + pinctrl-3 = <&P9_29_gpio_pd_pin>; + pinctrl-4 = <&P9_29_gpio_input_pin>; + pinctrl-5 = <&P9_29_spi_pin>; + pinctrl-6 = <&P9_29_pwm_pin>; + pinctrl-7 = <&P9_29_pruout_pin>; + pinctrl-8 = <&P9_29_pruin_pin>; + }; + + /* P9_30 (ZCZ ball D12) */ + P9_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P9_30_default_pin>; + pinctrl-1 = <&P9_30_gpio_pin>; + pinctrl-2 = <&P9_30_gpio_pu_pin>; + pinctrl-3 = <&P9_30_gpio_pd_pin>; + pinctrl-4 = <&P9_30_gpio_input_pin>; + pinctrl-5 = <&P9_30_spi_pin>; + pinctrl-6 = <&P9_30_pwm_pin>; + pinctrl-7 = <&P9_30_pruout_pin>; + pinctrl-8 = <&P9_30_pruin_pin>; + }; + + /* P9_31 (ZCZ ball A13) audio */ + P9_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P9_31_default_pin>; + pinctrl-1 = <&P9_31_gpio_pin>; + pinctrl-2 = <&P9_31_gpio_pu_pin>; + pinctrl-3 = <&P9_31_gpio_pd_pin>; + pinctrl-4 = <&P9_31_gpio_input_pin>; + pinctrl-5 = <&P9_31_spi_sclk_pin>; + pinctrl-6 = <&P9_31_pwm_pin>; + pinctrl-7 = <&P9_31_pruout_pin>; + pinctrl-8 = <&P9_31_pruin_pin>; + }; + + /* P9_32 VADC */ + + /* P9_33 (ZCZ ball C8) AIN4 */ + + /* P9_34 AGND */ + + /* P9_35 (ZCZ ball A8) AIN6 */ + + /* P9_36 (ZCZ ball B8) AIN5 */ + + /* P9_37 (ZCZ ball B7) AIN2 */ + + /* P9_38 (ZCZ ball A7) AIN3 */ + + /* P9_39 (ZCZ ball B6) AIN0 */ + + /* P9_40 (ZCZ ball C7) AIN1 */ + + /* P9_41 (ZCZ ball D14) */ + P9_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer", "pruin"; + pinctrl-0 = <&P9_41_default_pin>; + pinctrl-1 = <&P9_41_gpio_pin>; + pinctrl-2 = <&P9_41_gpio_pu_pin>; + pinctrl-3 = <&P9_41_gpio_pd_pin>; + pinctrl-4 = <&P9_41_gpio_input_pin>; + pinctrl-5 = <&P9_41_timer_pin>; + pinctrl-6 = <&P9_41_pruin_pin>; + }; + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) */ + P9_91_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_91_default_pin>; + pinctrl-1 = <&P9_91_gpio_pin>; + pinctrl-2 = <&P9_91_gpio_pu_pin>; + pinctrl-3 = <&P9_91_gpio_pd_pin>; + pinctrl-4 = <&P9_91_gpio_input_pin>; + pinctrl-5 = <&P9_91_qep_pin>; + pinctrl-6 = <&P9_91_pruout_pin>; + pinctrl-7 = <&P9_91_pruin_pin>; + }; + + /* P9_42 (ZCZ ball C18) */ + P9_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "spi_sclk", "uart", "pwm", "pru_ecap"; + pinctrl-0 = <&P9_42_default_pin>; + pinctrl-1 = <&P9_42_gpio_pin>; + pinctrl-2 = <&P9_42_gpio_pu_pin>; + pinctrl-3 = <&P9_42_gpio_pd_pin>; + pinctrl-4 = <&P9_42_gpio_input_pin>; + pinctrl-5 = <&P9_42_spi_cs_pin>; + pinctrl-6 = <&P9_42_spi_sclk_pin>; + pinctrl-7 = <&P9_42_uart_pin>; + pinctrl-8 = <&P9_42_pwm_pin>; + pinctrl-9 = <&P9_42_pru_ecap_pin>; + }; + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) */ + P9_92_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_92_default_pin>; + pinctrl-1 = <&P9_92_gpio_pin>; + pinctrl-2 = <&P9_92_gpio_pu_pin>; + pinctrl-3 = <&P9_92_gpio_pd_pin>; + pinctrl-4 = <&P9_92_gpio_input_pin>; + pinctrl-5 = <&P9_92_qep_pin>; + pinctrl-6 = <&P9_92_pruout_pin>; + pinctrl-7 = <&P9_92_pruin_pin>; + }; + + /* P9_43 GND */ + + /* P9_44 GND */ + + /* P9_45 GND */ + + /* P9_46 GND */ + + + cape-universal { + compatible = "gpio-of-helper"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + P8_03 { + gpio-name = "P8_03"; + gpio = <&gpio1 6 0>; + input; + dir-changeable; + }; + + P8_04 { + gpio-name = "P8_04"; + gpio = <&gpio1 7 0>; + input; + dir-changeable; + }; + + P8_05 { + gpio-name = "P8_05"; + gpio = <&gpio1 2 0>; + input; + dir-changeable; + }; + + P8_06 { + gpio-name = "P8_06"; + gpio = <&gpio1 3 0>; + input; + dir-changeable; + }; + + P8_07 { + gpio-name = "P8_07"; + gpio = <&gpio2 2 0>; + input; + dir-changeable; + }; + + P8_08 { + gpio-name = "P8_08"; + gpio = <&gpio2 3 0>; + input; + dir-changeable; + }; + + P8_09 { + gpio-name = "P8_09"; + gpio = <&gpio2 5 0>; + input; + dir-changeable; + }; + + P8_10 { + gpio-name = "P8_10"; + gpio = <&gpio2 4 0>; + input; + dir-changeable; + }; + + P8_11 { + gpio-name = "P8_11"; + gpio = <&gpio1 13 0>; + input; + dir-changeable; + }; + + P8_12 { + gpio-name = "P8_12"; + gpio = <&gpio1 12 0>; + input; + dir-changeable; + }; + + P8_13 { + gpio-name = "P8_13"; + gpio = <&gpio0 23 0>; + input; + dir-changeable; + }; + + P8_14 { + gpio-name = "P8_14"; + gpio = <&gpio0 26 0>; + input; + dir-changeable; + }; + + P8_15 { + gpio-name = "P8_15"; + gpio = <&gpio1 15 0>; + input; + dir-changeable; + }; + + P8_16 { + gpio-name = "P8_16"; + gpio = <&gpio1 14 0>; + input; + dir-changeable; + }; + + P8_17 { + gpio-name = "P8_17"; + gpio = <&gpio0 27 0>; + input; + dir-changeable; + }; + + P8_18 { + gpio-name = "P8_18"; + gpio = <&gpio2 1 0>; + input; + dir-changeable; + }; + + P8_19 { + gpio-name = "P8_19"; + gpio = <&gpio0 22 0>; + input; + dir-changeable; + }; + + P8_20 { + gpio-name = "P8_20"; + gpio = <&gpio1 31 0>; + input; + dir-changeable; + }; + + P8_21 { + gpio-name = "P8_21"; + gpio = <&gpio1 30 0>; + input; + dir-changeable; + }; + + P8_22 { + gpio-name = "P8_22"; + gpio = <&gpio1 5 0>; + input; + dir-changeable; + }; + + P8_23 { + gpio-name = "P8_23"; + gpio = <&gpio1 4 0>; + input; + dir-changeable; + }; + + P8_24 { + gpio-name = "P8_24"; + gpio = <&gpio1 1 0>; + input; + dir-changeable; + }; + + P8_25 { + gpio-name = "P8_25"; + gpio = <&gpio1 0 0>; + input; + dir-changeable; + }; + + P8_26 { + gpio-name = "P8_26"; + gpio = <&gpio1 29 0>; + input; + dir-changeable; + }; + + P8_27 { + gpio-name = "P8_27"; + gpio = <&gpio2 22 0>; + input; + dir-changeable; + }; + + P8_28 { + gpio-name = "P8_28"; + gpio = <&gpio2 24 0>; + input; + dir-changeable; + }; + + P8_29 { + gpio-name = "P8_29"; + gpio = <&gpio2 23 0>; + input; + dir-changeable; + }; + + P8_30 { + gpio-name = "P8_30"; + gpio = <&gpio2 25 0>; + input; + dir-changeable; + }; + + P8_31 { + gpio-name = "P8_31"; + gpio = <&gpio0 10 0>; + input; + dir-changeable; + }; + + P8_32 { + gpio-name = "P8_32"; + gpio = <&gpio0 11 0>; + input; + dir-changeable; + }; + + P8_33 { + gpio-name = "P8_33"; + gpio = <&gpio0 9 0>; + input; + dir-changeable; + }; + + P8_34 { + gpio-name = "P8_34"; + gpio = <&gpio2 17 0>; + input; + dir-changeable; + }; + + P8_35 { + gpio-name = "P8_35"; + gpio = <&gpio0 8 0>; + input; + dir-changeable; + }; + + P8_36 { + gpio-name = "P8_36"; + gpio = <&gpio2 16 0>; + input; + dir-changeable; + }; + + P8_37 { + gpio-name = "P8_37"; + gpio = <&gpio2 14 0>; + input; + dir-changeable; + }; + + P8_38 { + gpio-name = "P8_38"; + gpio = <&gpio2 15 0>; + input; + dir-changeable; + }; + + P8_39 { + gpio-name = "P8_39"; + gpio = <&gpio2 12 0>; + input; + dir-changeable; + }; + + P8_40 { + gpio-name = "P8_40"; + gpio = <&gpio2 13 0>; + input; + dir-changeable; + }; + + P8_41 { + gpio-name = "P8_41"; + gpio = <&gpio2 10 0>; + input; + dir-changeable; + }; + + P8_42 { + gpio-name = "P8_42"; + gpio = <&gpio2 11 0>; + input; + dir-changeable; + }; + + P8_43 { + gpio-name = "P8_43"; + gpio = <&gpio2 8 0>; + input; + dir-changeable; + }; + + P8_44 { + gpio-name = "P8_44"; + gpio = <&gpio2 9 0>; + input; + dir-changeable; + }; + + P8_45 { + gpio-name = "P8_45"; + gpio = <&gpio2 6 0>; + input; + dir-changeable; + }; + + P8_46 { + gpio-name = "P8_46"; + gpio = <&gpio2 7 0>; + input; + dir-changeable; + }; + + P9_11 { + gpio-name = "P9_11"; + gpio = <&gpio0 30 0>; + input; + dir-changeable; + }; + + P9_12 { + gpio-name = "P9_12"; + gpio = <&gpio1 28 0>; + input; + dir-changeable; + }; + + P9_13 { + gpio-name = "P9_13"; + gpio = <&gpio0 31 0>; + input; + dir-changeable; + }; + + P9_14 { + gpio-name = "P9_14"; + gpio = <&gpio1 18 0>; + input; + dir-changeable; + }; + + P9_15 { + gpio-name = "P9_15"; + gpio = <&gpio1 16 0>; + input; + dir-changeable; + }; + + P9_16 { + gpio-name = "P9_16"; + gpio = <&gpio1 19 0>; + input; + dir-changeable; + }; + + P9_17 { + gpio-name = "P9_17"; + gpio = <&gpio0 5 0>; + input; + dir-changeable; + }; + + P9_18 { + gpio-name = "P9_18"; + gpio = <&gpio0 4 0>; + input; + dir-changeable; + }; + + P9_19 { + gpio-name = "P9_19"; + gpio = <&gpio0 13 0>; + input; + dir-changeable; + }; + + P9_20 { + gpio-name = "P9_20"; + gpio = <&gpio0 12 0>; + input; + dir-changeable; + }; + + P9_21 { + gpio-name = "P9_21"; + gpio = <&gpio0 3 0>; + input; + dir-changeable; + }; + + P9_22 { + gpio-name = "P9_22"; + gpio = <&gpio0 2 0>; + input; + dir-changeable; + }; + + P9_23 { + gpio-name = "P9_23"; + gpio = <&gpio1 17 0>; + input; + dir-changeable; + }; + + P9_24 { + gpio-name = "P9_24"; + gpio = <&gpio0 15 0>; + input; + dir-changeable; + }; + + P9_25 { + gpio-name = "P9_25"; + gpio = <&gpio3 21 0>; + input; + dir-changeable; + }; + + P9_26 { + gpio-name = "P9_26"; + gpio = <&gpio0 14 0>; + input; + dir-changeable; + }; + + P9_27 { + gpio-name = "P9_27"; + gpio = <&gpio3 19 0>; + input; + dir-changeable; + }; + + P9_28 { + gpio-name = "P9_28"; + gpio = <&gpio3 17 0>; + input; + dir-changeable; + }; + + P9_29 { + gpio-name = "P9_29"; + gpio = <&gpio3 15 0>; + input; + dir-changeable; + }; + + P9_30 { + gpio-name = "P9_30"; + gpio = <&gpio3 16 0>; + input; + dir-changeable; + }; + + P9_31 { + gpio-name = "P9_31"; + gpio = <&gpio3 14 0>; + input; + dir-changeable; + }; + + P9_41 { + gpio-name = "P9_41"; + gpio = <&gpio0 20 0>; + input; + dir-changeable; + }; + + P9_91 { + gpio-name = "P9_91"; + gpio = <&gpio3 20 0>; + input; + dir-changeable; + }; + + P9_42 { + gpio-name = "P9_42"; + gpio = <&gpio0 7 0>; + input; + dir-changeable; + }; + + P9_92 { + gpio-name = "P9_92"; + gpio = <&gpio3 18 0>; + input; + dir-changeable; + }; + + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 9e5e75e..ba762ce 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -29,14 +29,14 @@ compatible = "gpio-leds"; led2 { - label = "beaglebone:green:heartbeat"; + label = "beaglebone:green:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led3 { - label = "beaglebone:green:mmc0"; + label = "beaglebone:green:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; @@ -66,9 +66,6 @@ }; &am33xx_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin>; - user_leds_s0: user_leds_s0 { pinctrl-single,pins = < AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ @@ -99,15 +96,11 @@ >; }; - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; - }; - cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ @@ -127,6 +120,8 @@ cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -421,4 +416,5 @@ &rtc { clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; + system-power-controller; }; diff --git b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi new file mode 100644 index 0000000..7d8f673 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* standard */ + +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-jtag.dtsi b/arch/arm/boot/dts/am335x-bone-jtag.dtsi new file mode 100644 index 0000000..603ef0a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-jtag.dtsi @@ -0,0 +1,20 @@ +/* + * Device Tree Source for bone jtag + * + * Copyright (C) 2015 Robert Nelson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi new file mode 100644 index 0000000..0961216 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-can0.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_19_pinmux { + * mode = "can"; + * }; + * P9_20_pinmux { + * mode = "can"; + * }; + *}; + * + *&dcan0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + dcan0_pins: pinmux_dcan0_pins { + pinctrl-single,pins = < + /* P9_20: uart1_ctsn.d_can0_tx */ + BONE_P9_20 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_19: uart1_rtsn.d_can0_rx */ + BONE_P9_19 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; +}; + +&dcan0 { + pinctrl-0 = <&dcan0_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi new file mode 100644 index 0000000..9e26413 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-can1.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_24_pinmux { + * mode = "can"; + * }; + * P9_26_pinmux { + * mode = "can"; + * }; + *}; + * + *&dcan1 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* P9_26: uart1_rxd.d_can1_tx */ + BONE_P9_26 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_24: uart1_txd.d_can1_rx */ + BONE_P9_24 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; +}; + +&dcan1 { + pinctrl-0 = <&dcan1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi new file mode 100644 index 0000000..22cf462 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* lsblk */ + +#include +#include "am335x-peripheral-emmc.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_21_pinmux { + * state = "disabled"; + * }; + * P8_20_pinmux { + * state = "disabled"; + * }; + * P8_25_pinmux { + * state = "disabled"; + * }; + * P8_24_pinmux { + * state = "disabled"; + * }; + * P8_05_pinmux { + * state = "disabled"; + * }; + * P8_06_pinmux { + * state = "disabled"; + * }; + * P8_23_pinmux { + * state = "disabled"; + * }; + * P8_22_pinmux { + * state = "disabled"; + * }; + * P8_03_pinmux { + * state = "disabled"; + * }; + * P8_04_pinmux { + * state = "disabled"; + * }; + *}; + * + *&mmc2 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + /* P8_21: gpmc_csn1.mmc1_clk */ + BONE_P8_21 (PIN_INPUT_PULLUP | MUX_MODE2) + /* P8_20: gpmc_csn2.mmc1_cmd */ + BONE_P8_20 (PIN_INPUT_PULLUP | MUX_MODE2) + /* P8_25: gpmc_ad0.mmc1_dat0 */ + BONE_P8_25 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_24: gpmc_ad1.mmc1_dat1 */ + BONE_P8_24 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_05: gpmc_ad2.mmc1_dat2 */ + BONE_P8_05 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_06: gpmc_ad3.mmc1_dat3 */ + BONE_P8_06 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_23: gpmc_ad4.mmc1_dat4 */ + BONE_P8_23 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_22: gpmc_ad5.mmc1_dat5 */ + BONE_P8_22 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_03: gpmc_ad6.mmc1_dat6 */ + BONE_P8_03 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_04: gpmc_ad7.mmc1_dat7 */ + BONE_P8_04 (PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; +}; + +&mmc2 { + pinctrl-0 = <&emmc_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi new file mode 100644 index 0000000..abf3b57 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-i2c2.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_19_pinmux { + * mode = "i2c"; + * }; + * P9_20_pinmux { + * mode = "i2c"; + * }; + *}; + * + *&dcan0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + /* P9_20: uart1_ctsn.i2c2_sda */ + BONE_P9_20 (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) + /* P9_19: uart1_rtsn.i2c2_scl */ + BONE_P9_19 (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi new file mode 100644 index 0000000..5205fa0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi @@ -0,0 +1,120 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am335x-peripheral-nxp-hdmi.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_27_pinmux { + * state = "disabled"; + * }; + * P8_28_pinmux { + * state = "disabled"; + * }; + * P8_29_pinmux { + * state = "disabled"; + * }; + * P8_30_pinmux { + * state = "disabled"; + * }; + * P8_31_pinmux { + * state = "disabled"; + * }; + * P8_32_pinmux { + * state = "disabled"; + * }; + * P8_33_pinmux { + * state = "disabled"; + * }; + * P8_34_pinmux { + * state = "disabled"; + * }; + * P8_35_pinmux { + * state = "disabled"; + * }; + * P8_36_pinmux { + * state = "disabled"; + * }; + * P8_37_pinmux { + * state = "disabled"; + * }; + * P8_38_pinmux { + * state = "disabled"; + * }; + * P8_39_pinmux { + * state = "disabled"; + * }; + * P8_40_pinmux { + * state = "disabled"; + * }; + * P8_41_pinmux { + * state = "disabled"; + * }; + * P8_42_pinmux { + * state = "disabled"; + * }; + * P8_43_pinmux { + * state = "disabled"; + * }; + * P8_44_pinmux { + * state = "disabled"; + * }; + * P8_45_pinmux { + * state = "disabled"; + * }; + * P8_46_pinmux { + * state = "disabled"; + * }; + *}; + */ + +/* standard */ + +&am33xx_pinmux { + nxp_hdmi_pins: pinmux_nxp_hdmi_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + nxp_hdmi_off_pins: nxp_hdmi_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; +}; + +&i2c0 { + tda19988 { + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi new file mode 100644 index 0000000..65e5fbb --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_27_pinmux { + * state = "disabled"; + * }; + * P8_28_pinmux { + * state = "disabled"; + * }; + * P8_29_pinmux { + * state = "disabled"; + * }; + * P8_30_pinmux { + * state = "disabled"; + * }; + * P8_31_pinmux { + * state = "disabled"; + * }; + * P8_32_pinmux { + * state = "disabled"; + * }; + * P8_33_pinmux { + * state = "disabled"; + * }; + * P8_34_pinmux { + * state = "disabled"; + * }; + * P8_35_pinmux { + * state = "disabled"; + * }; + * P8_36_pinmux { + * state = "disabled"; + * }; + * P8_37_pinmux { + * state = "disabled"; + * }; + * P8_38_pinmux { + * state = "disabled"; + * }; + * P8_39_pinmux { + * state = "disabled"; + * }; + * P8_40_pinmux { + * state = "disabled"; + * }; + * P8_41_pinmux { + * state = "disabled"; + * }; + * P8_42_pinmux { + * state = "disabled"; + * }; + * P8_43_pinmux { + * state = "disabled"; + * }; + * P8_44_pinmux { + * state = "disabled"; + * }; + * P8_45_pinmux { + * state = "disabled"; + * }; + * P8_46_pinmux { + * state = "disabled"; + * }; + *}; + */ + +/* standard */ + +&am33xx_pinmux { + lcd_24bit_pins: pinmux_lcd_24bit_pins { + pinctrl-single,pins = < + + /* P8_45: lcd_data0.lcd_data0 */ + BONE_P8_45 (PIN_OUTPUT | MUX_MODE0) + /* P8_46: lcd_data1.lcd_data1 */ + BONE_P8_46 (PIN_OUTPUT | MUX_MODE0) + /* P8_43: lcd_data2.lcd_data2 */ + BONE_P8_43 (PIN_OUTPUT | MUX_MODE0) + /* P8_44: lcd_data3.lcd_data3 */ + BONE_P8_44 (PIN_OUTPUT | MUX_MODE0) + /* P8_41: lcd_data4.lcd_data4 */ + BONE_P8_41 (PIN_OUTPUT | MUX_MODE0) + /* P8_42: lcd_data5.lcd_data5 */ + BONE_P8_42 (PIN_OUTPUT | MUX_MODE0) + /* P8_39: lcd_data6.lcd_data6 */ + BONE_P8_39 (PIN_OUTPUT | MUX_MODE0) + /* P8_40: lcd_data7.lcd_data7 */ + BONE_P8_40 (PIN_OUTPUT | MUX_MODE0) + /* P8_37: lcd_data8.lcd_data8 */ + BONE_P8_37 (PIN_OUTPUT | MUX_MODE0) + /* P8_38: lcd_data9.lcd_data9 */ + BONE_P8_38 (PIN_OUTPUT | MUX_MODE0) + /* P8_36: lcd_data10.lcd_data10 */ + BONE_P8_36 (PIN_OUTPUT | MUX_MODE0) + /* P8_34: lcd_data11.lcd_data11 */ + BONE_P8_34 (PIN_OUTPUT | MUX_MODE0) + /* P8_35: lcd_data12.lcd_data12 */ + BONE_P8_35 (PIN_OUTPUT | MUX_MODE0) + /* P8_33: lcd_data13.lcd_data13 */ + BONE_P8_33 (PIN_OUTPUT | MUX_MODE0) + /* P8_31: lcd_data14.lcd_data14 */ + BONE_P8_31 (PIN_OUTPUT | MUX_MODE0) + /* P8_32: lcd_data15.lcd_data15 */ + BONE_P8_32 (PIN_OUTPUT | MUX_MODE0) + + /* gpmc_ad15.lcd_data16 */ + BONE_P8_15 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad14.lcd_data17 */ + BONE_P8_16 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad13.lcd_data18 */ + BONE_P8_11 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad12.lcd_data19 */ + BONE_P8_12 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad11.lcd_data20 */ + BONE_P8_17 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad10.lcd_data21 */ + BONE_P8_14 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad9.lcd_data22 */ + BONE_P8_13 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad8.lcd_data23 */ + BONE_P8_19 (PIN_OUTPUT | MUX_MODE1) + + /* P8_27: lcd_vsync.lcd_vsync */ + BONE_P8_27 (PIN_OUTPUT | MUX_MODE0) + /* P8_29: lcd_hsync.lcd_hsync */ + BONE_P8_29 (PIN_OUTPUT | MUX_MODE0) + /* P8_28: lcd_pclk.lcd_pclk*/ + BONE_P8_28 (PIN_OUTPUT | MUX_MODE0) + /* P8_30: lcd_ac_bias_en.lcd_ac_bias_en */ + BONE_P8_30 (PIN_OUTPUT | MUX_MODE0) + >; + }; +}; + +/ { + panel { + pinctrl-0 = <&lcd_24bit_pins>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi new file mode 100644 index 0000000..354e66a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi0.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_17_pinmux { + * status = "disabled"; + * }; + * P9_18_pinmux { + * status = "disabled"; + * }; + * P9_21_pinmux { + * status = "disabled"; + * }; + * P9_22_pinmux { + * status = "disabled"; + * }; + *}; + * + *&spi0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ + 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ + 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + >; + }; +}; + +&spi0 { + pinctrl-0 = <&spi0_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi new file mode 100644 index 0000000..bff7f8d --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi1.dtsi" + +/* standard */ + +&am33xx_pinmux { + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + 0x190 0x33 /* mcasp0_aclkx.spi1_sclk, INPUT_PULLUP | MODE3 */ + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */ + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */ + 0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */ + // 0x164 0x12 /* eCAP0_in_PWM0_out.spi1_cs1 OUTPUT_PULLUP | MODE2 */ >; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi new file mode 100644 index 0000000..62874c8 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi1.dtsi" + +/* standard */ + +&am33xx_pinmux { + spi1a_pins: pinmux_spi1a_pins { + pinctrl-single,pins = < + 0x164 0x34 /* eCAP0_in_PWM0_out.spi1_sclk, INPUT_PULLUP | MODE4 */ + /* NOTE: P9.42 is connected to two pads */ + // 0x1A0 0x27 /* set the other pad to gpio input */ + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */ + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */ + 0x178 0x14 /* uart1_ctsn.spi1_cs0, OUTPUT_PULLUP | MODE4 */ >; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1a_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi new file mode 100644 index 0000000..ae5b813 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS1 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS1.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_24_pinmux { + * mode = "uart"; + * }; + * P9_26_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart1 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + /* P9_24: uart1_txd.uart1_txd */ + BONE_P9_24 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P9_26: uart1_rxd.uart1_rxd */ + BONE_P9_26 (PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi new file mode 100644 index 0000000..5fa593a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS2 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS2.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_21_pinmux { + * mode = "uart"; + * }; + * P9_22_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart2 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + /* P9_21: spi0_d0.uart2_txd */ + BONE_P9_21 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) + /* P9_22: spi0_sclk.uart2_rxd */ + BONE_P9_22 (PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi new file mode 100644 index 0000000..1d22a95 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS4 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS4.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_11_pinmux { + * mode = "uart"; + * }; + * P9_13_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart4 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + /* P9_11: gpmc_wait0.uart4_rxd_mux2 */ + BONE_P9_11 (PIN_INPUT_PULLUP | MUX_MODE6) + /* P9_13: gpmc_wpn.uart4_txd_mux2 */ + BONE_P9_13 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) + >; + }; +}; + +&uart4 { + pinctrl-0 = <&uart4_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi new file mode 100644 index 0000000..01d0aec --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS5 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS5.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_37_pinmux { + * mode = "uart"; + * }; + * P8_38_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart5 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + /* P8_38: lcd_data9.uart5_rxd */ + BONE_P8_38 (PIN_INPUT_PULLUP | MUX_MODE4) + /* P8_37: lcd_data8.uart5_txd */ + BONE_P8_37 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) + >; + }; +}; + +&uart5 { + pinctrl-0 = <&uart5_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-uboot-univ.dts b/arch/arm/boot/dts/am335x-bone-uboot-univ.dts new file mode 100644 index 0000000..24cc695 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-uboot-univ.dts @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bone-common-univ.dtsi" + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&ldo3_reg>; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 6b84937..3688fff 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -9,6 +9,7 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone"; diff --git b/arch/arm/boot/dts/am335x-boneblack-audio.dts b/arch/arm/boot/dts/am335x-boneblack-audio.dts new file mode 100644 index 0000000..a938c2c --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-audio.dts @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts new file mode 100644 index 0000000..8d795c0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +#include "am335x-cape-bbb-exp-c.dtsi" diff --git b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts new file mode 100644 index 0000000..5df881e --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +#include "am335x-cape-bbb-exp-r.dtsi" diff --git b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts new file mode 100644 index 0000000..a224550 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts @@ -0,0 +1,206 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Modified by Mirko Denecke + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include +#include + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* P9_26: uart1_rxd.d_can1_tx */ + BONE_P9_26 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_24: uart1_txd.d_can1_rx */ + BONE_P9_24 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; + + pru_pins: pinmux_pru_pins { + pinctrl-single,pins = < + 0x03c 0x35 /* ecap0_in_pwm0_out.pr1_ecap0_ecap_capin, MODE5 | INPUT_PULLUP | PRU, PPM-sum, SBUS, DSM */ + + 0x0e8 0x25 /* lcd_pclk.pr1_pru1_pru_r30_10, MODE5 | OUTPUT | PRU, CH_1 */ + 0x0e0 0x25 /* lcd_vsync.pr1_pru1_pru_r30_8, MODE5 | OUTPUT | PRU, CH_2 */ + 0x0ec 0x25 /* lcd_ac_bias_en.pr1_pru1_pru_r30_11, MODE5 | OUTPUT | PRU, CH_3 */ + 0x0e4 0x25 /* lcd_hsync.pr1_pru1_pru_r30_9, MODE5 | OUTPUT | PRU, CH_4 */ + 0x0bc 0x25 /* lcd_data7.pr1_pru1_pru_r30_7, MODE5 | OUTPUT | PRU, CH_5 */ + 0x0b8 0x25 /* lcd_data6.pr1_pru1_pru_r30_6, MODE5 | OUTPUT | PRU, CH_6 */ + 0x0b4 0x25 /* lcd_data5.pr1_pru1_pru_r30_5, MODE5 | OUTPUT | PRU, CH_7 */ + 0x0b0 0x25 /* lcd_data4.pr1_pru1_pru_r30_4, MODE5 | OUTPUT | PRU, CH_8 */ + 0x0ac 0x25 /* lcd_data3.pr1_pru1_pru_r30_3, MODE5 | OUTPUT | PRU, CH_9 */ + 0x0a8 0x25 /* lcd_data2.pr1_pru1_pru_r30_2, MODE5 | OUTPUT | PRU, CH_10 */ + 0x0a4 0x25 /* lcd_data1.pr1_pru1_pru_r30_1, MODE5 | OUTPUT | PRU, CH_11 */ + 0x0a0 0x25 /* lcd_data0.pr1_pru1_pru_r30_0, MODE5 | OUTPUT | PRU, CH_12 */ + + BONE_P8_12 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* HC-SR04 TRIG */ + BONE_P8_16 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* HC-SR04 ECHO */ + + BONE_P9_25 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* MPU9250 INT */ + >; + }; + + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + /* P9_22: spi0_sclk.spi0_sclk */ + BONE_P9_22 (PIN_INPUT_PULLUP | MUX_MODE0) + /* P9_21: spi0_d0.spi0_d0 */ + BONE_P9_21 (PIN_INPUT_PULLUP | MUX_MODE0) + /* P9_18: spi0_d1.spi0_d1 */ + BONE_P9_18 (PIN_OUTPUT_PULLUP | MUX_MODE0) + /* P9_17: spi0_cs0.spi0_cs0 */ + BONE_P9_17 (PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + /* P9_31: mcasp0_aclkx.spi1_sclk */ + BONE_P9_31 (PIN_INPUT_PULLUP | MUX_MODE3) + + /* P9_29: mcasp0_fsx.spi1_d0 */ + BONE_P9_29 (PIN_INPUT_PULLUP | MUX_MODE3) + + /* P9_30: mcasp0_axr0.spi1_d1 */ + BONE_P9_30 (PIN_OUTPUT_PULLUP | MUX_MODE3) + + /* P9_28: mcasp0_ahclkr.spi1_cs0 */ + BONE_P9_28 (PIN_OUTPUT_PULLUP | MUX_MODE3) + + /* P9_19: uart1_rtsn.spi1_cs1 */ +/* BONE_P9_19 (PIN_OUTPUT_PULLUP | MUX_MODE4)*/ + + /* P9_42: ecap0_in_pwm0_out.spi1_cs1 */ + BONE_P9_42A (PIN_OUTPUT_PULLUP | MUX_MODE2) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + /* P9_11: gpmc_wait0.uart4_rxd_mux2 */ + BONE_P9_11 (PIN_INPUT_PULLUP | MUX_MODE6) + /* P9_13: gpmc_wpn.uart4_txd_mux2 */ + BONE_P9_13 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) + >; + }; + + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + /* P8_38: lcd_data9.uart5_rxd */ + BONE_P8_38 (PIN_INPUT_PULLUP | MUX_MODE4) + /* P8_37: lcd_data8.uart5_txd */ + BONE_P8_37 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) + >; + }; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi0@0 { + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <24000000>; + reg = <0>; + compatible = "spidev"; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi1@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + spi-max-frequency = <24000000>; + compatible = "spidev"; + }; + + spi1@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + spi-max-frequency = <24000000>; + compatible = "spidev"; + }; +}; + +&tscadc { + adc { + ti,adc-channels = <0 1>; + }; +}; + +//&pruss { +// pinctrl-names = "default"; +// pinctrl-0 = <&pru_pins>; +// status = "okay"; +//}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi index e543c2b..4413a0a 100644 --- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi +++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi @@ -30,7 +30,6 @@ &am33xx_pinmux { nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ @@ -54,12 +53,6 @@ >; }; - nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - >; - }; - mcasp0_pins: mcasp0_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ @@ -95,9 +88,8 @@ nxp,calib-gpios = <&gpio1 25 0>; interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default", "off"; + pinctrl-names = "default"; pinctrl-0 = <&nxp_hdmi_bonelt_pins>; - pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ /* video-ports = <0x234501>; */ diff --git b/arch/arm/boot/dts/am335x-boneblack-uboot-univ.dts b/arch/arm/boot/dts/am335x-boneblack-uboot-univ.dts new file mode 100644 index 0000000..7b4bf96 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-uboot-univ.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bone-common-univ.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro-1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-uboot.dts b/arch/arm/boot/dts/am335x-boneblack-uboot.dts new file mode 100644 index 0000000..738fa39 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-uboot.dts @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro-1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts index 83f49f6..4664f20 100644 --- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -11,6 +11,7 @@ #include "am335x-bone-common.dtsi" #include "am335x-boneblack-common.dtsi" #include +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone Black Wireless"; diff --git b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi new file mode 100644 index 0000000..94caa22 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + +/ { + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WL_EN */ + gpio = <&gpio0 26 0>; + enable-active-high; + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <44>; /* Bank1, pin12 */ + dev_name = "/dev/ttyO4"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_12 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + mmc2_pins_sleep: pinmux_mmc2_pins_sleep { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + uart4_pins_default: pinmux_uart4_pins_default { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT | MUX_MODE6) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */ + >; + }; + + uart4_pins_sleep: pinmux_uart4_pins_sleep { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wpn.uart4_txd */ + >; + }; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc2_pins &wlan_pins>; + pinctrl-1 = <&mmc2_pins_sleep &wlan_pins_sleep>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart4_pins_default>; + pinctrl-1 = <&uart4_pins_sleep>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts new file mode 100644 index 0000000..be7cab3 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +#include "am335x-boneblack-wl1835mod-cape.dtsi" diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index d154d31..e620232 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -10,6 +10,7 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" #include "am335x-boneblack-common.dtsi" +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone Black"; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 7bcd726..49b965a 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -125,9 +125,179 @@ gpio = <&gpio3 9 0>; enable-active-high; }; + + bt_en { + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + compatible = "gpio-leds"; + + wl18xx_bt_en { + label = "wl18xx_bt_en"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro-1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; }; &am33xx_pinmux { + /*************************************************************************** + * Static Pinmux + ***************************************************************************/ + mux_helper_pins: pins { + pinctrl-single,pins = < + + /* GPIO Inputs */ + 0x09c 0x37 /*P8.9 Pause BUTTON, input pullup*/ + 0x098 0x37 /*P8.10 MODE BUTTON input pullup*/ + 0x1AC 0x37 /*P9.25 MPU-9150 INTERRUPT IN*/ + + /* Motor Control GPIO Out*/ + 0x088 ( PIN_OUTPUT | MUX_MODE7 ) /* (T13) gpmc_csn3.gpio2[0] - MDIR_1A different from cape! */ + 0x074 ( PIN_OUTPUT | MUX_MODE7 ) /* (U17) gpmc_wpn.gpio0[31] - P9.13, MDIR_1B */ + 0x040 ( PIN_OUTPUT | MUX_MODE7 ) /* (R13) gpmc_a0.gpio1[16] - P9.15, MDIR_2A */ + 0x0D8 ( PIN_OUTPUT | MUX_MODE7 ) /* (V4) lcd_data14.gpio0[10] - P8.31, MDIR_2B different from cape! */ + 0x0AC ( PIN_OUTPUT | MUX_MODE7 ) /* (R4) lcd_data3.gpio2[9] - P8.44, MDIR_3A */ + 0x0A8 ( PIN_OUTPUT | MUX_MODE7 ) /* (R3) lcd_data2.gpio2[8] - P8.43, MDIR_3B */ + 0x0A0 ( PIN_OUTPUT | MUX_MODE7 ) /* (R1) lcd_data0.gpio2[6] - P8.45, MDIR_4A */ + 0x0A4 ( PIN_OUTPUT | MUX_MODE7 ) /* (R2) lcd_data1.gpio2[7] - P8.46, MDIR_4B */ + 0x1B4 ( PIN_OUTPUT | MUX_MODE7 ) /* (D14) xdma_event_intr1.gpio0[20] - P9.41, MOT_STBY */ + + /* PRU encoder input */ + 0x038 0x36 /* P8_16,PRU0_r31_16,MODE6 */ + + /* PRU Servo output */ + 0x0e0 0x05 /*pru1_pru_r30_8, MODE5*/ + 0x0e8 0x05 /*pru1_pru_r30_10, MODE5 */ + 0x0e4 0x05 /*pr1_pru1_pru_r30_9, MODE5 */ + 0x0ec 0x05 /*pru1_pru_r30_11, MODE5 */ + 0x0b8 0x05 /*pru1_pru_r30_6, MODE5 */ + 0x0bc 0x05 /*pru1_pru_r30_7, MODE5 */ + 0x0b0 0x05 /*pru1_pru_r30_4, MODE5 */ + 0x0b4 0x05 /*pru1_pru_r30_5, MODE5 */ + 0x0C8 0x0F /*P8.36, SERVO_PWR GPIO OUT*/ + + /* WILINK 8 */ + 0x08c 0x0F /*P8.18 V12 A2DP FSYNC */ + 0x078 0x0F /*P9.12 A2DP_CLOCK*/ + >; + + /* D13 BLUE_GP0_PIN_5 gpio 3_20 */ + D13_default_pin: pinmux_D13_default_pin { + pinctrl-single,pins = < 0x1A8 ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + D13_gpio_pin: pinmux_D13_gpio_pin { + pinctrl-single,pins = < 0x1A8 ( PIN_OUTPUT | MUX_MODE7 ) >; }; + D13_gpio_pu_pin: pinmux_D13_gpio_pu_pin { + pinctrl-single,pins = < 0x1A8 ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + D13_gpio_pd_pin: pinmux_D13_gpio_pd_pin { + pinctrl-single,pins = < 0x1A8 ( PIN_INPUT_PULLDOWN | MUX_MODE7 ) >; }; + + /* H17 BLUE_GP1_PIN_4 gpio 3_1 */ + H17_default_pin: pinmux_H17_default_pin { + pinctrl-single,pins = < 0x10C ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + H17_gpio_pin: pinmux_H17_gpio_pin { + pinctrl-single,pins = < 0x10C ( PIN_OUTPUT | MUX_MODE7 ) >; }; + H17_gpio_pu_pin: pinmux_H17_gpio_pu_pin { + pinctrl-single,pins = < 0x10C ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + H17_gpio_pd_pin: pinmux_H17_gpio_pd_pin { + pinctrl-single,pins = < 0x10C ( PIN_INPUT_PULLDOWN | MUX_MODE7 ) >; }; + + /* J15 BLUE_GP1_PIN_3 gpio 3_2 */ + J15_default_pin: pinmux_J15_default_pin { + pinctrl-single,pins = < 0x110 ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + J15_gpio_pin: pinmux_J15_gpio_pin { + pinctrl-single,pins = < 0x110 ( PIN_OUTPUT | MUX_MODE7 ) >; }; + J15_gpio_pu_pin: pinmux_J15_gpio_pu_pin { + pinctrl-single,pins = < 0x110 ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + J15_gpio_pd_pin: pinmux_J15_gpio_pd_pin { + pinctrl-single,pins = < 0x110 ( PIN_INPUT_PULLDOWN | MUX_MODE7 ) >; }; + + /* P8_15 (ZCZ ball U13) */ + P8_15_default_pin: pinmux_P8_15_default_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_gpio_pin: pinmux_P8_15_gpio_pin { + pinctrl-single,pins = <0x03c 0x2F>; }; /* Mode 7, RxActive */ + P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { + pinctrl-single,pins = <0x03c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_pruin_pin: pinmux_P8_15_pruin_pin { + pinctrl-single,pins = <0x03c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_15_qep_pin: pinmux_P8_15_qep_pin { + pinctrl-single,pins = <0x03c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_15_pruin_pu_pin: pinmux_P8_15_pruin_pu_pin { + pinctrl-single,pins = <0x03c 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + P8_15_pruecapin_pu_pin: pinmux_P8_15_pruecapin_pu_pin { + pinctrl-single,pins = <0x03c 0x35>; }; /* Mode 5, Pull-Up, RxActive */ + + /* P9_11 (ZCZ ball T17) */ + P9_11_default_pin: pinmux_P9_11_default_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pin: pinmux_P9_11_gpio_pin { + pinctrl-single,pins = <0x070 0x2F>; }; /* Mode 7, RxActive */ + P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { + pinctrl-single,pins = <0x070 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_11_uart_pin: pinmux_P9_11_uart_pin { + pinctrl-single,pins = <0x070 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_23 (ZCZ ball V14) */ + P9_23_default_pin: pinmux_P9_23_default_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_gpio_pin: pinmux_P9_23_gpio_pin { + pinctrl-single,pins = <0x044 0x2F>; }; /* Mode 7, RxActive */ + P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { + pinctrl-single,pins = <0x044 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_pwm_pin: pinmux_P9_23_pwm_pin { + pinctrl-single,pins = <0x044 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_28 (ZCZ ball C12) Audio */ + P9_28_default_pin: pinmux_P9_28_default_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_gpio_pin: pinmux_P9_28_gpio_pin { + pinctrl-single,pins = <0x19c 0x2F>; }; /* Mode 7, RxActive */ + P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { + pinctrl-single,pins = <0x19c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_pwm_pin: pinmux_P9_28_pwm_pin { + pinctrl-single,pins = <0x19c 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_28_spi_pin: pinmux_P9_28_spi_pin { + pinctrl-single,pins = <0x19c 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { + pinctrl-single,pins = <0x19c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_28_pruout_pin: pinmux_P9_28_pruout_pin { + pinctrl-single,pins = <0x19c 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_28_pruin_pin: pinmux_P9_28_pruin_pin { + pinctrl-single,pins = <0x19c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_28_audio_pin: pinmux_P9_28_audio_pin { + pinctrl-single,pins = <0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)>; }; /* mcasp0_ahclkr.mcasp0_axr2 */ + + /* U16 BLUE_GP0_PIN_3 gpio 1_25 */ + U16_default_pin: pinmux_U16_default_pin { + pinctrl-single,pins = < 0x064 ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + U16_gpio_pin: pinmux_U16_gpio_pin { + pinctrl-single,pins = < 0x064 ( PIN_OUTPUT | MUX_MODE7 ) >; }; + U16_gpio_pu_pin: pinmux_U16_gpio_pu_pin { + pinctrl-single,pins = < 0x064 ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + U16_gpio_pd_pin: pinmux_U16_gpio_pd_pin { + pinctrl-single,pins = < 0x064 ( PIN_INPUT_PULLDOWN | MUX_MODE7 ) >; }; + + }; + user_leds_s0: user_leds_s0 { pinctrl-single,pins = < AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ @@ -141,7 +311,6 @@ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */ - >; }; @@ -184,11 +353,11 @@ }; /* DSM2 */ - uart4_pins: pinmux_uart4_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ - >; - }; + //uart4_pins: pinmux_uart4_pins { + // pinctrl-single,pins = < + // AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ + // >; + //}; /* UT5 */ uart5_pins: pinmux_uart5_pins { @@ -261,6 +430,51 @@ AM33XX_IOPAD(0x940, PIN_OUTPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ >; }; + + ehrpwm1_pins: pinmux_ehrpwm1_pins { + pinctrl-single,pins = < + 0x020 0x24 /* P8_19_pwm_pin */ + 0x024 0x24 /* P8_13_pwm_pin */ + >; + }; + + ehrpwm2_pins: pinmux_ehrpwm2_pins { + pinctrl-single,pins = < + 0x048 0x26 /* P9_14_pwm_pin */ + 0x04c 0x26 /* P9_16_pwm_pin */ + >; + }; + + eqep0_pins: pinmux_eqep0_pins { + pinctrl-single,pins = < + 0x1a0 0x21 /* P9_92_qep_pin */ + 0x1a4 0x21 /* P9_27_qep_pin */ + >; + }; + + eqep1_pins: pinmux_eqep1_pins { + pinctrl-single,pins = < + 0x0d4 0x22 /* P8_33_qep_pin */ + 0x0d0 0x22 /* P8_35_qep_pin */ + >; + }; + + eqep2_pins: pinmux_eqep2_pins { + pinctrl-single,pins = < + 0x030 0x24 /* P8_12_qep_pin */ + 0x034 0x24 /* P8_11_qep_pin */ + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + 0x190 0x23 /* spi1_sclk */ + 0x194 0x23 /* spi1_d0 */ + 0x198 0x23 /* spi1_d1 */ + 0x144 ( PIN_OUTPUT | MUX_MODE2 ) /* spi1_cs0 */ + 0x164 ( PIN_OUTPUT | MUX_MODE2 ) /* spi1_cs1 */ + >; + }; }; &uart0 { @@ -284,12 +498,12 @@ status = "okay"; }; -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins>; - - status = "okay"; -}; +//&uart4 { +// pinctrl-names = "default"; +// pinctrl-0 = <&uart4_pins>; +// +// status = "okay"; +//}; &uart5 { pinctrl-names = "default"; @@ -387,6 +601,8 @@ interrupts = <7>; /* NMI */ interrupt-parent = <&intc>; + ti,pmic-shutdown-controller; + charger { interrupts = <0>, <1>; interrupt-names = "USB", "AC"; @@ -487,22 +703,23 @@ }; }; -&tscadc { - status = "okay"; - adc { - ti,adc-channels = <0 1 2 3 4 5 6 7>; - }; -}; +//&tscadc { +// status = "okay"; +// adc { +// ti,adc-channels = <0 1 2 3 4 5 6 7>; +// }; +//}; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins &bt_pins>; + //pinctrl-0 = <&uart3_pins &bt_pins>; + pinctrl-0 = <&uart3_pins>; status = "okay"; - bluetooth { - compatible = "ti,wl1835-st"; - enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; - }; +// bluetooth { +// compatible = "ti,wl1835-st"; +// enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; +// }; }; &aes { @@ -515,8 +732,10 @@ &rtc { system-power-controller; - clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; - clock-names = "ext-clk", "int-clk"; +}; + +&wkup_m3_ipc { + ti,scale-data-fw = "am335x-bone-scale-data.bin"; }; &dcan1 { @@ -533,3 +752,215 @@ line-name = "LS_BUF_EN"; }; }; + +&ocp { + /* activate the static pinmux helper list of pin modes above */ + test_helper: helper { + compatible = "bone-pinmux-helper"; + pinctrl-names = "default"; + pinctrl-0 = <&mux_helper_pins>; + + status = "okay"; + }; + + /* Encoder 4 (U13) */ + P8_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "pruin_pu", "gpio", "gpio_pu", "gpio_pd", "pruin", "qep", "pruecapin_pu"; + pinctrl-0 = <&P8_15_pruin_pu_pin>; + pinctrl-1 = <&P8_15_pruin_pu_pin>; + pinctrl-2 = <&P8_15_gpio_pin>; + pinctrl-3 = <&P8_15_gpio_pu_pin>; + pinctrl-4 = <&P8_15_gpio_pd_pin>; + pinctrl-5 = <&P8_15_pruin_pin>; + pinctrl-6 = <&P8_15_qep_pin>; + pinctrl-7 = <&P8_15_pruecapin_pu_pin>; + }; + + /* UART4 RX DSM */ + P9_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "uart", "gpio", "gpio_pu", "gpio_pd"; + pinctrl-0 = <&P9_11_uart_pin>; + pinctrl-1 = <&P9_11_uart_pin>; + pinctrl-2 = <&P9_11_gpio_pin>; + pinctrl-3 = <&P9_11_gpio_pu_pin>; + pinctrl-4 = <&P9_11_gpio_pd_pin>; + }; + + /* U16 BLUE_GP0_PIN_3 gpio 1_25*/ + U16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd"; + pinctrl-0 = <&U16_default_pin>; + pinctrl-1 = <&U16_gpio_pin>; + pinctrl-2 = <&U16_gpio_pu_pin>; + pinctrl-3 = <&U16_gpio_pd_pin>; + }; + + + /* BLUE_GP0_PIN_3 gpio1_17*/ + P9_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_23_default_pin>; + pinctrl-1 = <&P9_23_gpio_pin>; + pinctrl-2 = <&P9_23_gpio_pu_pin>; + pinctrl-3 = <&P9_23_gpio_pd_pin>; + pinctrl-4 = <&P9_23_pwm_pin>; + }; + + /* BLUE_GP0_PIN_5 gpio3_20 */ + D13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd"; + pinctrl-0 = <&D13_default_pin>; + pinctrl-1 = <&D13_gpio_pin>; + pinctrl-2 = <&D13_gpio_pu_pin>; + pinctrl-3 = <&D13_gpio_pd_pin>; + }; + + /* BLUE_GP0_PIN_6 gpio3_17 */ + P9_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pwm2", "pruout", "pruin"; + pinctrl-0 = <&P9_28_default_pin>; + pinctrl-1 = <&P9_28_gpio_pin>; + pinctrl-2 = <&P9_28_gpio_pu_pin>; + pinctrl-3 = <&P9_28_gpio_pd_pin>; + pinctrl-4 = <&P9_28_pwm_pin>; + pinctrl-5 = <&P9_28_spi_pin>; + pinctrl-6 = <&P9_28_pwm2_pin>; + pinctrl-7 = <&P9_28_pruout_pin>; + pinctrl-8 = <&P9_28_pruin_pin>; + }; + + /* BLUE_GP1_PIN_3 gpio3_2 */ + J15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd"; + pinctrl-0 = <&J15_default_pin>; + pinctrl-1 = <&J15_gpio_pin>; + pinctrl-2 = <&J15_gpio_pu_pin>; + pinctrl-3 = <&J15_gpio_pd_pin>; + }; + + /* BLUE_GP1_PIN_4 gpio3_1 */ + H17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd"; + pinctrl-0 = <&H17_default_pin>; + pinctrl-1 = <&H17_gpio_pin>; + pinctrl-2 = <&H17_gpio_pu_pin>; + pinctrl-3 = <&H17_gpio_pd_pin>; + }; +}; + +/******************************************************************************* +* PWMSS +*******************************************************************************/ +&epwmss0 { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm0 { + status = "okay"; +}; + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&ehrpwm1_pins>; + status = "okay"; +}; + +&ehrpwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&ehrpwm2_pins>; + status = "okay"; +}; + +/******************************************************************************* +* EQEP +*******************************************************************************/ +&eqep0 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep0_pins>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ + status = "okay"; +}; + +&eqep1 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep1_pins>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ + status = "okay"; +}; + +&eqep2 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep2_pins>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ + status = "okay"; +}; + +/******************************************************************************* + SPI +*******************************************************************************/ +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <24000000>; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <24000000>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-wireless-common-univ.dtsi b/arch/arm/boot/dts/am335x-bonegreen-wireless-common-univ.dtsi new file mode 100644 index 0000000..ae2f79a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless-common-univ.dtsi @@ -0,0 +1,2793 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + + /* P8_02 GND */ + + + /* P8_03 (ZCZ ball R9) emmc */ + P8_03_default_pin: pinmux_P8_03_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_pin: pinmux_P8_03_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_pu_pin: pinmux_P8_03_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_pd_pin: pinmux_P8_03_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_input_pin: pinmux_P8_03_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + + /* P8_04 (ZCZ ball T9) emmc */ + P8_04_default_pin: pinmux_P8_04_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_pin: pinmux_P8_04_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_pu_pin: pinmux_P8_04_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_pd_pin: pinmux_P8_04_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_input_pin: pinmux_P8_04_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + + /* P8_05 (ZCZ ball R8) emmc */ + P8_05_default_pin: pinmux_P8_05_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_pin: pinmux_P8_05_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_pu_pin: pinmux_P8_05_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_pd_pin: pinmux_P8_05_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_input_pin: pinmux_P8_05_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + + /* P8_06 (ZCZ ball T8) emmc */ + P8_06_default_pin: pinmux_P8_06_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_pin: pinmux_P8_06_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_pu_pin: pinmux_P8_06_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_pd_pin: pinmux_P8_06_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_input_pin: pinmux_P8_06_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + + /* P8_07 (ZCZ ball R7) gpio2_2 */ + P8_07_default_pin: pinmux_P8_07_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_pin: pinmux_P8_07_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_pu_pin: pinmux_P8_07_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_pd_pin: pinmux_P8_07_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_input_pin: pinmux_P8_07_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_timer_pin: pinmux_P8_07_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_advn_ale.timer4 */ + + /* P8_08 (ZCZ ball T7) gpio2_3 */ + P8_08_default_pin: pinmux_P8_08_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_pin: pinmux_P8_08_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_pu_pin: pinmux_P8_08_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_pd_pin: pinmux_P8_08_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_input_pin: pinmux_P8_08_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_timer_pin: pinmux_P8_08_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_oen_ren.timer7 */ + + /* P8_09 (ZCZ ball T6) gpio2_5 */ + P8_09_default_pin: pinmux_P8_09_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_pin: pinmux_P8_09_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_pu_pin: pinmux_P8_09_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_pd_pin: pinmux_P8_09_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_input_pin: pinmux_P8_09_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_timer_pin: pinmux_P8_09_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_be0n_cle.timer5 */ + + /* P8_10 (ZCZ ball U6) gpio2_4 */ + P8_10_default_pin: pinmux_P8_10_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_pin: pinmux_P8_10_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_pu_pin: pinmux_P8_10_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_pd_pin: pinmux_P8_10_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_input_pin: pinmux_P8_10_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_timer_pin: pinmux_P8_10_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_wen.timer6 */ + + /* P8_11 (ZCZ ball R12) gpio1_13 */ + P8_11_default_pin: pinmux_P8_11_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_pin: pinmux_P8_11_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_pu_pin: pinmux_P8_11_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_pd_pin: pinmux_P8_11_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_input_pin: pinmux_P8_11_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_qep_pin: pinmux_P8_11_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad13.eqep2b_in */ + P8_11_pruout_pin: pinmux_P8_11_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_ad13.pru0_out15 */ + + /* P8_12 (ZCZ ball T12) gpio1_12 */ + P8_12_default_pin: pinmux_P8_12_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_pin: pinmux_P8_12_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_pu_pin: pinmux_P8_12_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_pd_pin: pinmux_P8_12_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_input_pin: pinmux_P8_12_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_qep_pin: pinmux_P8_12_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad12.eqep2a_in */ + P8_12_pruout_pin: pinmux_P8_12_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_ad12.pru0_out14 */ + + /* P8_13 (ZCZ ball T10) gpio0_23 */ + P8_13_default_pin: pinmux_P8_13_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_pin: pinmux_P8_13_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_pu_pin: pinmux_P8_13_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_pd_pin: pinmux_P8_13_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_input_pin: pinmux_P8_13_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_pwm_pin: pinmux_P8_13_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad9.ehrpwm2b */ + + /* P8_14 (ZCZ ball T11) wl1835: wl_en */ + + /* P8_15 (ZCZ ball U13) gpio1_15 */ + P8_15_default_pin: pinmux_P8_15_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_pin: pinmux_P8_15_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_input_pin: pinmux_P8_15_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_qep_pin: pinmux_P8_15_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad15.eqep2_strobe */ + P8_15_pru_ecap_pin: pinmux_P8_15_pru_ecap_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_ad15.pr1_ecap0_ecap_capin_apwm_o */ + P8_15_pruin_pin: pinmux_P8_15_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_ad15.pru0_in15 */ + + /* P8_16 (ZCZ ball V13) gpio1_14 */ + P8_16_default_pin: pinmux_P8_16_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_pin: pinmux_P8_16_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_pu_pin: pinmux_P8_16_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_pd_pin: pinmux_P8_16_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_input_pin: pinmux_P8_16_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_qep_pin: pinmux_P8_16_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad14.eqep2_index */ + P8_16_pruin_pin: pinmux_P8_16_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_ad14.pru0_in14 */ + + /* P8_17 (ZCZ ball U12) wl1835: wl_irq */ + + /* P8_18 (ZCZ ball V12) gpio2_1 */ + P8_18_default_pin: pinmux_P8_18_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_pin: pinmux_P8_18_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_pu_pin: pinmux_P8_18_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_pd_pin: pinmux_P8_18_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_input_pin: pinmux_P8_18_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + + /* P8_19 (ZCZ ball U10) gpio0_22 */ + P8_19_default_pin: pinmux_P8_19_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_pin: pinmux_P8_19_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_pu_pin: pinmux_P8_19_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_pd_pin: pinmux_P8_19_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_input_pin: pinmux_P8_19_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_pwm_pin: pinmux_P8_19_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad8.ehrpwm2a */ + + /* P8_20 (ZCZ ball V9) emmc */ + P8_20_default_pin: pinmux_P8_20_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_pin: pinmux_P8_20_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_pu_pin: pinmux_P8_20_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_pd_pin: pinmux_P8_20_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_input_pin: pinmux_P8_20_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_pruout_pin: pinmux_P8_20_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_csn2.pru1_out13 */ + P8_20_pruin_pin: pinmux_P8_20_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_csn2.pru1_in13 */ + + /* P8_21 (ZCZ ball U9) emmc */ + P8_21_default_pin: pinmux_P8_21_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_pin: pinmux_P8_21_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_pu_pin: pinmux_P8_21_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_pd_pin: pinmux_P8_21_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_input_pin: pinmux_P8_21_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_pruout_pin: pinmux_P8_21_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_csn1.pru1_out12 */ + P8_21_pruin_pin: pinmux_P8_21_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_csn1.pru1_in12 */ + + /* P8_22 (ZCZ ball V8) emmc */ + P8_22_default_pin: pinmux_P8_22_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_pin: pinmux_P8_22_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_pu_pin: pinmux_P8_22_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_pd_pin: pinmux_P8_22_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_input_pin: pinmux_P8_22_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + + /* P8_23 (ZCZ ball U8) emmc */ + P8_23_default_pin: pinmux_P8_23_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_pin: pinmux_P8_23_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_pu_pin: pinmux_P8_23_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_pd_pin: pinmux_P8_23_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_input_pin: pinmux_P8_23_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + + /* P8_24 (ZCZ ball V7) emmc */ + P8_24_default_pin: pinmux_P8_24_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_pin: pinmux_P8_24_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_pu_pin: pinmux_P8_24_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_pd_pin: pinmux_P8_24_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_input_pin: pinmux_P8_24_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + + /* P8_25 (ZCZ ball U7) emmc */ + P8_25_default_pin: pinmux_P8_25_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_pin: pinmux_P8_25_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_pu_pin: pinmux_P8_25_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_pd_pin: pinmux_P8_25_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_input_pin: pinmux_P8_25_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + + /* P8_26 (ZCZ ball V6) gpio-hog wl1835 */ + + /* P8_27 (ZCZ ball U5) hdmi */ + P8_27_default_pin: pinmux_P8_27_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_pin: pinmux_P8_27_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_pu_pin: pinmux_P8_27_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_pd_pin: pinmux_P8_27_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_input_pin: pinmux_P8_27_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_pruout_pin: pinmux_P8_27_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_vsync.pru1_out8 */ + P8_27_pruin_pin: pinmux_P8_27_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_vsync.pru1_in8 */ + + /* P8_28 (ZCZ ball V5) hdmi */ + P8_28_default_pin: pinmux_P8_28_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_pin: pinmux_P8_28_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_pu_pin: pinmux_P8_28_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_pd_pin: pinmux_P8_28_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_input_pin: pinmux_P8_28_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_pruout_pin: pinmux_P8_28_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_pclk.pru1_out10 */ + P8_28_pruin_pin: pinmux_P8_28_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_pclk.pru1_in10 */ + + /* P8_29 (ZCZ ball R5) hdmi */ + P8_29_default_pin: pinmux_P8_29_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_pin: pinmux_P8_29_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_pu_pin: pinmux_P8_29_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_pd_pin: pinmux_P8_29_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_input_pin: pinmux_P8_29_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_pruout_pin: pinmux_P8_29_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_hsync.pru1_out9 */ + P8_29_pruin_pin: pinmux_P8_29_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_hsync.pru1_in9 */ + + /* P8_30 (ZCZ ball R6) hdmi */ + P8_30_default_pin: pinmux_P8_30_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_pin: pinmux_P8_30_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_pu_pin: pinmux_P8_30_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_pd_pin: pinmux_P8_30_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_input_pin: pinmux_P8_30_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_pruout_pin: pinmux_P8_30_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_ac_bias_en.pru1_out11 */ + P8_30_pruin_pin: pinmux_P8_30_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE6) >; }; /* lcd_ac_bias_en.pru1_in11 */ + + /* P8_31 (ZCZ ball V4) hdmi */ + P8_31_default_pin: pinmux_P8_31_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_pin: pinmux_P8_31_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_pu_pin: pinmux_P8_31_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_pd_pin: pinmux_P8_31_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_input_pin: pinmux_P8_31_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_qep_pin: pinmux_P8_31_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data14.eqep1_index */ + P8_31_uart_pin: pinmux_P8_31_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* lcd_data14.uart5_rxd */ + + /* P8_32 (ZCZ ball T5) hdmi */ + P8_32_default_pin: pinmux_P8_32_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_pin: pinmux_P8_32_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_pu_pin: pinmux_P8_32_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_pd_pin: pinmux_P8_32_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_input_pin: pinmux_P8_32_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_qep_pin: pinmux_P8_32_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data15.eqep1_strobe */ + + /* P8_33 (ZCZ ball V3) hdmi */ + P8_33_default_pin: pinmux_P8_33_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_pin: pinmux_P8_33_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_pu_pin: pinmux_P8_33_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_pd_pin: pinmux_P8_33_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_input_pin: pinmux_P8_33_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_qep_pin: pinmux_P8_33_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data13.eqep1b_in */ + + /* P8_34 (ZCZ ball U4) hdmi */ + P8_34_default_pin: pinmux_P8_34_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_pin: pinmux_P8_34_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_pu_pin: pinmux_P8_34_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_pd_pin: pinmux_P8_34_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_input_pin: pinmux_P8_34_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_pwm_pin: pinmux_P8_34_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data11.ehrpwm1b */ + + /* P8_35 (ZCZ ball V2) hdmi */ + P8_35_default_pin: pinmux_P8_35_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_pin: pinmux_P8_35_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_pu_pin: pinmux_P8_35_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_pd_pin: pinmux_P8_35_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_input_pin: pinmux_P8_35_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_qep_pin: pinmux_P8_35_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data12.eqep1a_in */ + + /* P8_36 (ZCZ ball U3) hdmi */ + P8_36_default_pin: pinmux_P8_36_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_pin: pinmux_P8_36_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_pu_pin: pinmux_P8_36_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_pd_pin: pinmux_P8_36_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_input_pin: pinmux_P8_36_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_pwm_pin: pinmux_P8_36_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data10.ehrpwm1a */ + + /* P8_37 (ZCZ ball U1) hdmi */ + P8_37_default_pin: pinmux_P8_37_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_pin: pinmux_P8_37_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_pu_pin: pinmux_P8_37_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_pd_pin: pinmux_P8_37_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_input_pin: pinmux_P8_37_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_pwm_pin: pinmux_P8_37_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data8.ehrpwm1_tripzone_input */ + P8_37_uart_pin: pinmux_P8_37_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* lcd_data8.uart5_txd */ + + /* P8_38 (ZCZ ball U2) hdmi */ + P8_38_default_pin: pinmux_P8_38_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_pin: pinmux_P8_38_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_pu_pin: pinmux_P8_38_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_pd_pin: pinmux_P8_38_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_input_pin: pinmux_P8_38_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_pwm_pin: pinmux_P8_38_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data9.ehrpwm0_synco */ + P8_38_uart_pin: pinmux_P8_38_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* lcd_data9.uart5_rxd */ + + /* P8_39 (ZCZ ball T3) hdmi */ + P8_39_default_pin: pinmux_P8_39_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_pin: pinmux_P8_39_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_pu_pin: pinmux_P8_39_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_pd_pin: pinmux_P8_39_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_input_pin: pinmux_P8_39_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_qep_pin: pinmux_P8_39_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data6.eqep2_index */ + P8_39_pruout_pin: pinmux_P8_39_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data6.pru1_out6 */ + P8_39_pruin_pin: pinmux_P8_39_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data6.pru1_in6 */ + + /* P8_40 (ZCZ ball T4) hdmi */ + P8_40_default_pin: pinmux_P8_40_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_pin: pinmux_P8_40_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_pu_pin: pinmux_P8_40_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_pd_pin: pinmux_P8_40_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_input_pin: pinmux_P8_40_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_qep_pin: pinmux_P8_40_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data7.eqep2_strobe */ + P8_40_pruout_pin: pinmux_P8_40_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data7.pru1_out7 */ + P8_40_pruin_pin: pinmux_P8_40_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data7.pru1_in7 */ + + /* P8_41 (ZCZ ball T1) hdmi */ + P8_41_default_pin: pinmux_P8_41_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_pin: pinmux_P8_41_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_pu_pin: pinmux_P8_41_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_pd_pin: pinmux_P8_41_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_input_pin: pinmux_P8_41_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_qep_pin: pinmux_P8_41_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data4.eqep2a_in */ + P8_41_pruout_pin: pinmux_P8_41_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data4.pru1_out4 */ + P8_41_pruin_pin: pinmux_P8_41_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data4.pru1_in4 */ + + /* P8_42 (ZCZ ball T2) hdmi */ + P8_42_default_pin: pinmux_P8_42_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_pin: pinmux_P8_42_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_pu_pin: pinmux_P8_42_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_pd_pin: pinmux_P8_42_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_input_pin: pinmux_P8_42_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_qep_pin: pinmux_P8_42_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data5.eqep2b_in */ + P8_42_pruout_pin: pinmux_P8_42_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data5.pru1_out5 */ + P8_42_pruin_pin: pinmux_P8_42_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data5.pru1_in5 */ + + /* P8_43 (ZCZ ball R3) hdmi */ + P8_43_default_pin: pinmux_P8_43_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_pin: pinmux_P8_43_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_pu_pin: pinmux_P8_43_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_pd_pin: pinmux_P8_43_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_input_pin: pinmux_P8_43_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_pwm_pin: pinmux_P8_43_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data2.ehrpwm2_tripzone_input */ + P8_43_pruout_pin: pinmux_P8_43_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data2.pru1_out2 */ + P8_43_pruin_pin: pinmux_P8_43_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data2.pru1_in2 */ + + /* P8_44 (ZCZ ball R4) hdmi */ + P8_44_default_pin: pinmux_P8_44_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_pin: pinmux_P8_44_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_pu_pin: pinmux_P8_44_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_pd_pin: pinmux_P8_44_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_input_pin: pinmux_P8_44_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_pwm_pin: pinmux_P8_44_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data3.ehrpwm0_synco */ + P8_44_pruout_pin: pinmux_P8_44_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data3.pru1_out3 */ + P8_44_pruin_pin: pinmux_P8_44_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data3.pru1_in3 */ + + /* P8_45 (ZCZ ball R1) hdmi */ + P8_45_default_pin: pinmux_P8_45_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_pin: pinmux_P8_45_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_pu_pin: pinmux_P8_45_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_pd_pin: pinmux_P8_45_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_input_pin: pinmux_P8_45_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_pwm_pin: pinmux_P8_45_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data0.ehrpwm2a */ + P8_45_pruout_pin: pinmux_P8_45_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data0.pru1_out0 */ + P8_45_pruin_pin: pinmux_P8_45_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data0.pru1_in0 */ + + /* P8_46 (ZCZ ball R2) hdmi */ + P8_46_default_pin: pinmux_P8_46_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_pin: pinmux_P8_46_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_pu_pin: pinmux_P8_46_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_pd_pin: pinmux_P8_46_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_input_pin: pinmux_P8_46_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_pwm_pin: pinmux_P8_46_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data1.ehrpwm2b */ + P8_46_pruout_pin: pinmux_P8_46_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data1.pru1_out1 */ + P8_46_pruin_pin: pinmux_P8_46_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data1.pru1_in1 */ + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + + /* P9_02 GND */ + + /* P9_03 3V3 */ + + /* P9_04 3V3 */ + + /* P9_05 VDD_5V */ + + /* P9_06 VDD_5V */ + + /* P9_07 SYS_5V */ + + /* P9_08 SYS_5V */ + + /* P9_09 PWR_BUT */ + + /* P9_10 RSTn */ + + /* P9_11 (ZCZ ball T17) gpio0_30 */ + P9_11_default_pin: pinmux_P9_11_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_pin: pinmux_P9_11_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_input_pin: pinmux_P9_11_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_uart_pin: pinmux_P9_11_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wait0.uart4_rxd */ + + /* P9_12 (ZCZ ball U18) gpio1_28 */ + P9_12_default_pin: pinmux_P9_12_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_pin: pinmux_P9_12_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_pu_pin: pinmux_P9_12_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_pd_pin: pinmux_P9_12_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_input_pin: pinmux_P9_12_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + + /* P9_13 (ZCZ ball U17) gpio0_31 */ + P9_13_default_pin: pinmux_P9_13_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_pin: pinmux_P9_13_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_pu_pin: pinmux_P9_13_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_pd_pin: pinmux_P9_13_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_input_pin: pinmux_P9_13_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_uart_pin: pinmux_P9_13_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wpn.uart4_txd */ + + /* P9_14 (ZCZ ball U14) gpio1_18 */ + P9_14_default_pin: pinmux_P9_14_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_pin: pinmux_P9_14_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_pu_pin: pinmux_P9_14_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_pd_pin: pinmux_P9_14_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_input_pin: pinmux_P9_14_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_pwm_pin: pinmux_P9_14_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a2.ehrpwm1a */ + + /* P9_15 (ZCZ ball R13) gpio1_16 */ + P9_15_default_pin: pinmux_P9_15_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_pin: pinmux_P9_15_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_pu_pin: pinmux_P9_15_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_pd_pin: pinmux_P9_15_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_input_pin: pinmux_P9_15_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_pwm_pin: pinmux_P9_15_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a0.ehrpwm1_tripzone_input */ + + /* P9_16 (ZCZ ball T14) gpio1_19 */ + P9_16_default_pin: pinmux_P9_16_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_pin: pinmux_P9_16_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_pu_pin: pinmux_P9_16_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_pd_pin: pinmux_P9_16_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_input_pin: pinmux_P9_16_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_pwm_pin: pinmux_P9_16_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a3.ehrpwm1b */ + + /* P9_17 (ZCZ ball A16) gpio0_5 */ + P9_17_default_pin: pinmux_P9_17_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_pin: pinmux_P9_17_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_pu_pin: pinmux_P9_17_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_pd_pin: pinmux_P9_17_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_input_pin: pinmux_P9_17_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_INPUT | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_spi_cs_pin: pinmux_P9_17_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_cs0.spi0_cs0 */ + P9_17_i2c_pin: pinmux_P9_17_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_cs0.i2c1_scl */ + P9_17_pwm_pin: pinmux_P9_17_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_cs0.ehrpwm0_synci */ + P9_17_pru_uart_pin: pinmux_P9_17_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_cs0.pr1_uart0_txd */ + + /* P9_18 (ZCZ ball B16) gpio0_4 */ + P9_18_default_pin: pinmux_P9_18_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_pin: pinmux_P9_18_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_pu_pin: pinmux_P9_18_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_pd_pin: pinmux_P9_18_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_input_pin: pinmux_P9_18_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_INPUT | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_spi_pin: pinmux_P9_18_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d1.spi0_d1 */ + P9_18_i2c_pin: pinmux_P9_18_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_d1.i2c1_sda */ + P9_18_pwm_pin: pinmux_P9_18_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_d1.ehrpwm0_tripzone_input */ + P9_18_pru_uart_pin: pinmux_P9_18_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_d1.pr1_uart0_rxd */ + + /* P9_19 (ZCZ ball D17) i2c2_scl */ + P9_19_default_pin: pinmux_P9_19_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */ + P9_19_gpio_pin: pinmux_P9_19_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_gpio_pu_pin: pinmux_P9_19_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_gpio_pd_pin: pinmux_P9_19_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_gpio_input_pin: pinmux_P9_19_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_INPUT | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_timer_pin: pinmux_P9_19_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart1_rtsn.timer5 */ + P9_19_can_pin: pinmux_P9_19_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart1_rtsn.dcan0_rx */ + P9_19_i2c_pin: pinmux_P9_19_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */ + P9_19_spi_cs_pin: pinmux_P9_19_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_rtsn.spi1_cs1 */ + P9_19_pru_uart_pin: pinmux_P9_19_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_rtsn.pr1_uart0_rts_n */ + + /* P9_20 (ZCZ ball D18) i2c2_sda */ + P9_20_default_pin: pinmux_P9_20_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */ + P9_20_gpio_pin: pinmux_P9_20_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_gpio_pu_pin: pinmux_P9_20_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_gpio_pd_pin: pinmux_P9_20_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_gpio_input_pin: pinmux_P9_20_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_INPUT | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_timer_pin: pinmux_P9_20_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart1_ctsn.timer6 */ + P9_20_can_pin: pinmux_P9_20_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart1_ctsn.dcan0_tx */ + P9_20_i2c_pin: pinmux_P9_20_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */ + P9_20_spi_cs_pin: pinmux_P9_20_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_ctsn.spi1_cs0 */ + P9_20_pru_uart_pin: pinmux_P9_20_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_ctsn.pr1_uart0_cts_n */ + + /* P9_21 (ZCZ ball B17) gpio0_3 */ + P9_21_default_pin: pinmux_P9_21_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_pin: pinmux_P9_21_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_pu_pin: pinmux_P9_21_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_pd_pin: pinmux_P9_21_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_input_pin: pinmux_P9_21_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_INPUT | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_spi_pin: pinmux_P9_21_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d0.spi0_d0 */ + P9_21_uart_pin: pinmux_P9_21_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* spi0_d0.uart2_txd */ + P9_21_i2c_pin: pinmux_P9_21_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_d0.i2c2_scl */ + P9_21_pwm_pin: pinmux_P9_21_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_d0.ehrpwm0b */ + P9_21_pru_uart_pin: pinmux_P9_21_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_d0.pr1_uart0_rts_n */ + + /* P9_22 (ZCZ ball A17) gpio0_2 */ + P9_22_default_pin: pinmux_P9_22_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_pin: pinmux_P9_22_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_pu_pin: pinmux_P9_22_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_pd_pin: pinmux_P9_22_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_input_pin: pinmux_P9_22_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_INPUT | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_spi_sclk_pin: pinmux_P9_22_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_sclk.spi0_sclk */ + P9_22_uart_pin: pinmux_P9_22_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* spi0_sclk.uart2_rxd */ + P9_22_i2c_pin: pinmux_P9_22_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_sclk.i2c2_sda */ + P9_22_pwm_pin: pinmux_P9_22_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_sclk.ehrpwm0a */ + P9_22_pru_uart_pin: pinmux_P9_22_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_sclk.pr1_uart0_cts_n */ + + /* P9_23 (ZCZ ball V14) gpio1_17 */ + P9_23_default_pin: pinmux_P9_23_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_pin: pinmux_P9_23_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_input_pin: pinmux_P9_23_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_pwm_pin: pinmux_P9_23_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a1.ehrpwm0_synco */ + + /* P9_24 (ZCZ ball D15) gpio0_15 */ + P9_24_default_pin: pinmux_P9_24_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_pin: pinmux_P9_24_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_pu_pin: pinmux_P9_24_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_pd_pin: pinmux_P9_24_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_input_pin: pinmux_P9_24_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_uart_pin: pinmux_P9_24_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart1_txd.uart1_txd */ + P9_24_can_pin: pinmux_P9_24_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart1_txd.dcan1_rx */ + P9_24_i2c_pin: pinmux_P9_24_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_txd.i2c1_scl */ + P9_24_pru_uart_pin: pinmux_P9_24_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_txd.pr1_uart0_txd */ + P9_24_pruin_pin: pinmux_P9_24_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE6) >; }; /* uart1_txd.pru0_in16 */ + + /* P9_25 (ZCZ ball A14) audio */ + P9_25_default_pin: pinmux_P9_25_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_pin: pinmux_P9_25_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_pu_pin: pinmux_P9_25_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_pd_pin: pinmux_P9_25_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_input_pin: pinmux_P9_25_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_qep_pin: pinmux_P9_25_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_ahclkx.eqep0_strobe */ + P9_25_pruout_pin: pinmux_P9_25_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_ahclkx.pru0_out7 */ + P9_25_pruin_pin: pinmux_P9_25_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkx.pru0_in7 */ + + /* P9_26 (ZCZ ball D16) gpio0_14 */ + P9_26_default_pin: pinmux_P9_26_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_pin: pinmux_P9_26_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_pu_pin: pinmux_P9_26_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_pd_pin: pinmux_P9_26_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_input_pin: pinmux_P9_26_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_uart_pin: pinmux_P9_26_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart1_rxd.uart1_rxd */ + P9_26_can_pin: pinmux_P9_26_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart1_rxd.dcan1_tx */ + P9_26_i2c_pin: pinmux_P9_26_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rxd.i2c1_sda */ + P9_26_pru_uart_pin: pinmux_P9_26_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_rxd.pr1_uart0_rxd */ + P9_26_pruin_pin: pinmux_P9_26_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE6) >; }; /* uart1_rxd.pru1_in16 */ + + /* P9_27 (ZCZ ball C13) gpio3_19 */ + P9_27_default_pin: pinmux_P9_27_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_pin: pinmux_P9_27_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_pu_pin: pinmux_P9_27_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_pd_pin: pinmux_P9_27_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_input_pin: pinmux_P9_27_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_qep_pin: pinmux_P9_27_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_fsr.eqep0b_in */ + P9_27_pruout_pin: pinmux_P9_27_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_fsr.pru0_out5 */ + P9_27_pruin_pin: pinmux_P9_27_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsr.pru0_in5 */ + + /* P9_28 (ZCZ ball C12) audio */ + P9_28_default_pin: pinmux_P9_28_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_pin: pinmux_P9_28_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_input_pin: pinmux_P9_28_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_pwm_pin: pinmux_P9_28_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_ahclkr.ehrpwm0_synci */ + P9_28_spi_cs_pin: pinmux_P9_28_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_ahclkr.spi1_cs0 */ + P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* mcasp0_ahclkr.ecap2_in_pwm2_out */ + P9_28_pruout_pin: pinmux_P9_28_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_ahclkr.pru0_out3 */ + P9_28_pruin_pin: pinmux_P9_28_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkr.pru0_in3 */ + + /* P9_29 (ZCZ ball B13) audio */ + P9_29_default_pin: pinmux_P9_29_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_pin: pinmux_P9_29_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_pu_pin: pinmux_P9_29_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_pd_pin: pinmux_P9_29_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_input_pin: pinmux_P9_29_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_pwm_pin: pinmux_P9_29_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_fsx.ehrpwm0b */ + P9_29_spi_pin: pinmux_P9_29_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_fsx.spi1_d0 */ + P9_29_pruout_pin: pinmux_P9_29_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_fsx.pru0_out1 */ + P9_29_pruin_pin: pinmux_P9_29_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsx.pru0_in1 */ + + /* P9_30 (ZCZ ball D12) gpio-hog wl1835 */ + + /* P9_31 (ZCZ ball A13) audio */ + P9_31_default_pin: pinmux_P9_31_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_pin: pinmux_P9_31_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_pu_pin: pinmux_P9_31_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_pd_pin: pinmux_P9_31_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_input_pin: pinmux_P9_31_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_pwm_pin: pinmux_P9_31_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkx.ehrpwm0a */ + P9_31_spi_sclk_pin: pinmux_P9_31_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_aclkx.spi1_sclk */ + P9_31_pruout_pin: pinmux_P9_31_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_aclkx.pru0_out0 */ + P9_31_pruin_pin: pinmux_P9_31_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkx.pru0_in0 */ + + /* P9_32 VADC */ + + /* P9_33 (ZCZ ball C8) AIN4 */ + + /* P9_34 AGND */ + + /* P9_35 (ZCZ ball A8) AIN6 */ + + /* P9_36 (ZCZ ball B8) AIN5 */ + + /* P9_37 (ZCZ ball B7) AIN2 */ + + /* P9_38 (ZCZ ball A7) AIN3 */ + + /* P9_39 (ZCZ ball B6) AIN0 */ + + /* P9_40 (ZCZ ball C7) AIN1 */ + + /* P9_41 (ZCZ ball D14) gpio0_20 */ + P9_41_default_pin: pinmux_P9_41_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_pin: pinmux_P9_41_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_pu_pin: pinmux_P9_41_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_pd_pin: pinmux_P9_41_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_input_pin: pinmux_P9_41_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_timer_pin: pinmux_P9_41_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* xdma_event_intr1.timer7 */ + P9_41_pruin_pin: pinmux_P9_41_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE5) >; }; /* xdma_event_intr1.pru0_in16 */ + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) gpio3_20 */ + P9_91_default_pin: pinmux_P9_91_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_pin: pinmux_P9_91_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_pu_pin: pinmux_P9_91_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_pd_pin: pinmux_P9_91_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_input_pin: pinmux_P9_91_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_qep_pin: pinmux_P9_91_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_axr1.eqep0_index */ + P9_91_pruout_pin: pinmux_P9_91_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_axr1.pru0_out6 */ + P9_91_pruin_pin: pinmux_P9_91_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr1.pru0_in6 */ + + /* P9_42 (ZCZ ball C18) gpio0_7 */ + P9_42_default_pin: pinmux_P9_42_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_pin: pinmux_P9_42_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_pu_pin: pinmux_P9_42_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_pd_pin: pinmux_P9_42_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_input_pin: pinmux_P9_42_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_INPUT | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_pwm_pin: pinmux_P9_42_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE0) >; }; /* eCAP0_in_PWM0_out.ecap0_in_pwm0_out */ + P9_42_uart_pin: pinmux_P9_42_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* eCAP0_in_PWM0_out.uart3_txd */ + P9_42_spi_cs_pin: pinmux_P9_42_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* eCAP0_in_PWM0_out.spi1_cs1 */ + P9_42_pru_ecap_pin: pinmux_P9_42_pru_ecap_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* eCAP0_in_PWM0_out.pr1_ecap0_ecap_capin_apwm_o */ + P9_42_spi_sclk_pin: pinmux_P9_42_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* eCAP0_in_PWM0_out.spi1_sclk */ + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) gpio3_18 */ + P9_92_default_pin: pinmux_P9_92_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_pin: pinmux_P9_92_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_pu_pin: pinmux_P9_92_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_pd_pin: pinmux_P9_92_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_input_pin: pinmux_P9_92_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_qep_pin: pinmux_P9_92_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkr.eqep0a_in */ + P9_92_pruout_pin: pinmux_P9_92_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_aclkr.pru0_out4 */ + P9_92_pruin_pin: pinmux_P9_92_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkr.pru0_in4 */ + + /* P9_43 GND */ + + /* P9_44 GND */ + + /* P9_45 GND */ + + /* P9_46 GND */ +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + clock-frequency = <100000>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + clock-frequency = <100000>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart5 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&dcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&eqep0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ +}; + +&eqep1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ +}; + +&eqep2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ +}; + +&epwmss0 { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ehrpwm1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ehrpwm2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ecap0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ecap1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ecap2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + + reg = <0>; + spi-max-frequency = <16000000>; + spi-cpha; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + + reg = <1>; + spi-max-frequency = <16000000>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + + reg = <0>; + spi-max-frequency = <16000000>; + spi-cpha; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + + reg = <1>; + spi-max-frequency = <16000000>; + }; +}; + +/**********************************************************************/ +/* Pin Multiplex Helpers */ +/* */ +/* These provide userspace runtime pin configuration for the */ +/* BeagleBone cape expansion headers */ +/**********************************************************************/ + +&ocp { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + + /* P8_02 GND */ + + + /* P8_03 (ZCZ ball R9) emmc */ + P8_03_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_03_default_pin>; + pinctrl-1 = <&P8_03_gpio_pin>; + pinctrl-2 = <&P8_03_gpio_pu_pin>; + pinctrl-3 = <&P8_03_gpio_pd_pin>; + pinctrl-4 = <&P8_03_gpio_input_pin>; + }; + + /* P8_04 (ZCZ ball T9) emmc */ + P8_04_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_04_default_pin>; + pinctrl-1 = <&P8_04_gpio_pin>; + pinctrl-2 = <&P8_04_gpio_pu_pin>; + pinctrl-3 = <&P8_04_gpio_pd_pin>; + pinctrl-4 = <&P8_04_gpio_input_pin>; + }; + + /* P8_05 (ZCZ ball R8) emmc */ + P8_05_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_05_default_pin>; + pinctrl-1 = <&P8_05_gpio_pin>; + pinctrl-2 = <&P8_05_gpio_pu_pin>; + pinctrl-3 = <&P8_05_gpio_pd_pin>; + pinctrl-4 = <&P8_05_gpio_input_pin>; + }; + + /* P8_06 (ZCZ ball T8) emmc */ + P8_06_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_06_default_pin>; + pinctrl-1 = <&P8_06_gpio_pin>; + pinctrl-2 = <&P8_06_gpio_pu_pin>; + pinctrl-3 = <&P8_06_gpio_pd_pin>; + pinctrl-4 = <&P8_06_gpio_input_pin>; + }; + + /* P8_07 (ZCZ ball R7) */ + P8_07_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_07_default_pin>; + pinctrl-1 = <&P8_07_gpio_pin>; + pinctrl-2 = <&P8_07_gpio_pu_pin>; + pinctrl-3 = <&P8_07_gpio_pd_pin>; + pinctrl-4 = <&P8_07_gpio_input_pin>; + pinctrl-5 = <&P8_07_timer_pin>; + }; + + /* P8_08 (ZCZ ball T7) */ + P8_08_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_08_default_pin>; + pinctrl-1 = <&P8_08_gpio_pin>; + pinctrl-2 = <&P8_08_gpio_pu_pin>; + pinctrl-3 = <&P8_08_gpio_pd_pin>; + pinctrl-4 = <&P8_08_gpio_input_pin>; + pinctrl-5 = <&P8_08_timer_pin>; + }; + + /* P8_09 (ZCZ ball T6) */ + P8_09_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_09_default_pin>; + pinctrl-1 = <&P8_09_gpio_pin>; + pinctrl-2 = <&P8_09_gpio_pu_pin>; + pinctrl-3 = <&P8_09_gpio_pd_pin>; + pinctrl-4 = <&P8_09_gpio_input_pin>; + pinctrl-5 = <&P8_09_timer_pin>; + }; + + /* P8_10 (ZCZ ball U6) */ + P8_10_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_10_default_pin>; + pinctrl-1 = <&P8_10_gpio_pin>; + pinctrl-2 = <&P8_10_gpio_pu_pin>; + pinctrl-3 = <&P8_10_gpio_pd_pin>; + pinctrl-4 = <&P8_10_gpio_input_pin>; + pinctrl-5 = <&P8_10_timer_pin>; + }; + + /* P8_11 (ZCZ ball R12) */ + P8_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout"; + pinctrl-0 = <&P8_11_default_pin>; + pinctrl-1 = <&P8_11_gpio_pin>; + pinctrl-2 = <&P8_11_gpio_pu_pin>; + pinctrl-3 = <&P8_11_gpio_pd_pin>; + pinctrl-4 = <&P8_11_gpio_input_pin>; + pinctrl-5 = <&P8_11_qep_pin>; + pinctrl-6 = <&P8_11_pruout_pin>; + }; + + /* P8_12 (ZCZ ball T12) */ + P8_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout"; + pinctrl-0 = <&P8_12_default_pin>; + pinctrl-1 = <&P8_12_gpio_pin>; + pinctrl-2 = <&P8_12_gpio_pu_pin>; + pinctrl-3 = <&P8_12_gpio_pd_pin>; + pinctrl-4 = <&P8_12_gpio_input_pin>; + pinctrl-5 = <&P8_12_qep_pin>; + pinctrl-6 = <&P8_12_pruout_pin>; + }; + + /* P8_13 (ZCZ ball T10) */ + P8_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_13_default_pin>; + pinctrl-1 = <&P8_13_gpio_pin>; + pinctrl-2 = <&P8_13_gpio_pu_pin>; + pinctrl-3 = <&P8_13_gpio_pd_pin>; + pinctrl-4 = <&P8_13_gpio_input_pin>; + pinctrl-5 = <&P8_13_pwm_pin>; + }; + + /* P8_14 (ZCZ ball T11) wl1835: wl_en */ + + /* P8_15 (ZCZ ball U13) */ + P8_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pru_ecap", "pruin"; + pinctrl-0 = <&P8_15_default_pin>; + pinctrl-1 = <&P8_15_gpio_pin>; + pinctrl-2 = <&P8_15_gpio_pu_pin>; + pinctrl-3 = <&P8_15_gpio_pd_pin>; + pinctrl-4 = <&P8_15_gpio_input_pin>; + pinctrl-5 = <&P8_15_qep_pin>; + pinctrl-6 = <&P8_15_pru_ecap_pin>; + pinctrl-7 = <&P8_15_pruin_pin>; + }; + + /* P8_16 (ZCZ ball V13) */ + P8_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruin"; + pinctrl-0 = <&P8_16_default_pin>; + pinctrl-1 = <&P8_16_gpio_pin>; + pinctrl-2 = <&P8_16_gpio_pu_pin>; + pinctrl-3 = <&P8_16_gpio_pd_pin>; + pinctrl-4 = <&P8_16_gpio_input_pin>; + pinctrl-5 = <&P8_16_qep_pin>; + pinctrl-6 = <&P8_16_pruin_pin>; + }; + + /* P8_17 (ZCZ ball U12) wl1835: wl_irq */ + + /* P8_18 (ZCZ ball V12) */ + P8_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_18_default_pin>; + pinctrl-1 = <&P8_18_gpio_pin>; + pinctrl-2 = <&P8_18_gpio_pu_pin>; + pinctrl-3 = <&P8_18_gpio_pd_pin>; + pinctrl-4 = <&P8_18_gpio_input_pin>; + }; + + /* P8_19 (ZCZ ball U10) */ + P8_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_19_default_pin>; + pinctrl-1 = <&P8_19_gpio_pin>; + pinctrl-2 = <&P8_19_gpio_pu_pin>; + pinctrl-3 = <&P8_19_gpio_pd_pin>; + pinctrl-4 = <&P8_19_gpio_input_pin>; + pinctrl-5 = <&P8_19_pwm_pin>; + }; + + /* P8_20 (ZCZ ball V9) emmc */ + P8_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_20_default_pin>; + pinctrl-1 = <&P8_20_gpio_pin>; + pinctrl-2 = <&P8_20_gpio_pu_pin>; + pinctrl-3 = <&P8_20_gpio_pd_pin>; + pinctrl-4 = <&P8_20_gpio_input_pin>; + pinctrl-5 = <&P8_20_pruout_pin>; + pinctrl-6 = <&P8_20_pruin_pin>; + }; + + /* P8_21 (ZCZ ball U9) emmc */ + P8_21_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_21_default_pin>; + pinctrl-1 = <&P8_21_gpio_pin>; + pinctrl-2 = <&P8_21_gpio_pu_pin>; + pinctrl-3 = <&P8_21_gpio_pd_pin>; + pinctrl-4 = <&P8_21_gpio_input_pin>; + pinctrl-5 = <&P8_21_pruout_pin>; + pinctrl-6 = <&P8_21_pruin_pin>; + }; + + /* P8_22 (ZCZ ball V8) emmc */ + P8_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_22_default_pin>; + pinctrl-1 = <&P8_22_gpio_pin>; + pinctrl-2 = <&P8_22_gpio_pu_pin>; + pinctrl-3 = <&P8_22_gpio_pd_pin>; + pinctrl-4 = <&P8_22_gpio_input_pin>; + }; + + /* P8_23 (ZCZ ball U8) emmc */ + P8_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_23_default_pin>; + pinctrl-1 = <&P8_23_gpio_pin>; + pinctrl-2 = <&P8_23_gpio_pu_pin>; + pinctrl-3 = <&P8_23_gpio_pd_pin>; + pinctrl-4 = <&P8_23_gpio_input_pin>; + }; + + /* P8_24 (ZCZ ball V7) emmc */ + P8_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_24_default_pin>; + pinctrl-1 = <&P8_24_gpio_pin>; + pinctrl-2 = <&P8_24_gpio_pu_pin>; + pinctrl-3 = <&P8_24_gpio_pd_pin>; + pinctrl-4 = <&P8_24_gpio_input_pin>; + }; + + /* P8_25 (ZCZ ball U7) emmc */ + P8_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_25_default_pin>; + pinctrl-1 = <&P8_25_gpio_pin>; + pinctrl-2 = <&P8_25_gpio_pu_pin>; + pinctrl-3 = <&P8_25_gpio_pd_pin>; + pinctrl-4 = <&P8_25_gpio_input_pin>; + }; + + /* P8_26 (ZCZ ball V6) gpio-hog wl1835 */ + + /* P8_27 (ZCZ ball U5) hdmi */ + P8_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_27_default_pin>; + pinctrl-1 = <&P8_27_gpio_pin>; + pinctrl-2 = <&P8_27_gpio_pu_pin>; + pinctrl-3 = <&P8_27_gpio_pd_pin>; + pinctrl-4 = <&P8_27_gpio_input_pin>; + pinctrl-5 = <&P8_27_pruout_pin>; + pinctrl-6 = <&P8_27_pruin_pin>; + }; + + /* P8_28 (ZCZ ball V5) hdmi */ + P8_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_28_default_pin>; + pinctrl-1 = <&P8_28_gpio_pin>; + pinctrl-2 = <&P8_28_gpio_pu_pin>; + pinctrl-3 = <&P8_28_gpio_pd_pin>; + pinctrl-4 = <&P8_28_gpio_input_pin>; + pinctrl-5 = <&P8_28_pruout_pin>; + pinctrl-6 = <&P8_28_pruin_pin>; + }; + + /* P8_29 (ZCZ ball R5) hdmi */ + P8_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_29_default_pin>; + pinctrl-1 = <&P8_29_gpio_pin>; + pinctrl-2 = <&P8_29_gpio_pu_pin>; + pinctrl-3 = <&P8_29_gpio_pd_pin>; + pinctrl-4 = <&P8_29_gpio_input_pin>; + pinctrl-5 = <&P8_29_pruout_pin>; + pinctrl-6 = <&P8_29_pruin_pin>; + }; + + /* P8_30 (ZCZ ball R6) hdmi */ + P8_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_30_default_pin>; + pinctrl-1 = <&P8_30_gpio_pin>; + pinctrl-2 = <&P8_30_gpio_pu_pin>; + pinctrl-3 = <&P8_30_gpio_pd_pin>; + pinctrl-4 = <&P8_30_gpio_input_pin>; + pinctrl-5 = <&P8_30_pruout_pin>; + pinctrl-6 = <&P8_30_pruin_pin>; + }; + + /* P8_31 (ZCZ ball V4) hdmi */ + P8_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "qep"; + pinctrl-0 = <&P8_31_default_pin>; + pinctrl-1 = <&P8_31_gpio_pin>; + pinctrl-2 = <&P8_31_gpio_pu_pin>; + pinctrl-3 = <&P8_31_gpio_pd_pin>; + pinctrl-4 = <&P8_31_gpio_input_pin>; + pinctrl-5 = <&P8_31_uart_pin>; + pinctrl-6 = <&P8_31_qep_pin>; + }; + + /* P8_32 (ZCZ ball T5) hdmi */ + P8_32_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P8_32_default_pin>; + pinctrl-1 = <&P8_32_gpio_pin>; + pinctrl-2 = <&P8_32_gpio_pu_pin>; + pinctrl-3 = <&P8_32_gpio_pd_pin>; + pinctrl-4 = <&P8_32_gpio_input_pin>; + pinctrl-5 = <&P8_32_qep_pin>; + }; + + /* P8_33 (ZCZ ball V3) hdmi */ + P8_33_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P8_33_default_pin>; + pinctrl-1 = <&P8_33_gpio_pin>; + pinctrl-2 = <&P8_33_gpio_pu_pin>; + pinctrl-3 = <&P8_33_gpio_pd_pin>; + pinctrl-4 = <&P8_33_gpio_input_pin>; + pinctrl-5 = <&P8_33_qep_pin>; + }; + + /* P8_34 (ZCZ ball U4) hdmi */ + P8_34_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_34_default_pin>; + pinctrl-1 = <&P8_34_gpio_pin>; + pinctrl-2 = <&P8_34_gpio_pu_pin>; + pinctrl-3 = <&P8_34_gpio_pd_pin>; + pinctrl-4 = <&P8_34_gpio_input_pin>; + pinctrl-5 = <&P8_34_pwm_pin>; + }; + + /* P8_35 (ZCZ ball V2) hdmi */ + P8_35_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P8_35_default_pin>; + pinctrl-1 = <&P8_35_gpio_pin>; + pinctrl-2 = <&P8_35_gpio_pu_pin>; + pinctrl-3 = <&P8_35_gpio_pd_pin>; + pinctrl-4 = <&P8_35_gpio_input_pin>; + pinctrl-5 = <&P8_35_qep_pin>; + }; + + /* P8_36 (ZCZ ball U3) hdmi */ + P8_36_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_36_default_pin>; + pinctrl-1 = <&P8_36_gpio_pin>; + pinctrl-2 = <&P8_36_gpio_pu_pin>; + pinctrl-3 = <&P8_36_gpio_pd_pin>; + pinctrl-4 = <&P8_36_gpio_input_pin>; + pinctrl-5 = <&P8_36_pwm_pin>; + }; + + /* P8_37 (ZCZ ball U1) hdmi */ + P8_37_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "pwm"; + pinctrl-0 = <&P8_37_default_pin>; + pinctrl-1 = <&P8_37_gpio_pin>; + pinctrl-2 = <&P8_37_gpio_pu_pin>; + pinctrl-3 = <&P8_37_gpio_pd_pin>; + pinctrl-4 = <&P8_37_gpio_input_pin>; + pinctrl-5 = <&P8_37_uart_pin>; + pinctrl-6 = <&P8_37_pwm_pin>; + }; + + /* P8_38 (ZCZ ball U2) hdmi */ + P8_38_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "pwm"; + pinctrl-0 = <&P8_38_default_pin>; + pinctrl-1 = <&P8_38_gpio_pin>; + pinctrl-2 = <&P8_38_gpio_pu_pin>; + pinctrl-3 = <&P8_38_gpio_pd_pin>; + pinctrl-4 = <&P8_38_gpio_input_pin>; + pinctrl-5 = <&P8_38_uart_pin>; + pinctrl-6 = <&P8_38_pwm_pin>; + }; + + /* P8_39 (ZCZ ball T3) hdmi */ + P8_39_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_39_default_pin>; + pinctrl-1 = <&P8_39_gpio_pin>; + pinctrl-2 = <&P8_39_gpio_pu_pin>; + pinctrl-3 = <&P8_39_gpio_pd_pin>; + pinctrl-4 = <&P8_39_gpio_input_pin>; + pinctrl-5 = <&P8_39_qep_pin>; + pinctrl-6 = <&P8_39_pruout_pin>; + pinctrl-7 = <&P8_39_pruin_pin>; + }; + + /* P8_40 (ZCZ ball T4) hdmi */ + P8_40_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_40_default_pin>; + pinctrl-1 = <&P8_40_gpio_pin>; + pinctrl-2 = <&P8_40_gpio_pu_pin>; + pinctrl-3 = <&P8_40_gpio_pd_pin>; + pinctrl-4 = <&P8_40_gpio_input_pin>; + pinctrl-5 = <&P8_40_qep_pin>; + pinctrl-6 = <&P8_40_pruout_pin>; + pinctrl-7 = <&P8_40_pruin_pin>; + }; + + /* P8_41 (ZCZ ball T1) hdmi */ + P8_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_41_default_pin>; + pinctrl-1 = <&P8_41_gpio_pin>; + pinctrl-2 = <&P8_41_gpio_pu_pin>; + pinctrl-3 = <&P8_41_gpio_pd_pin>; + pinctrl-4 = <&P8_41_gpio_input_pin>; + pinctrl-5 = <&P8_41_qep_pin>; + pinctrl-6 = <&P8_41_pruout_pin>; + pinctrl-7 = <&P8_41_pruin_pin>; + }; + + /* P8_42 (ZCZ ball T2) hdmi */ + P8_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_42_default_pin>; + pinctrl-1 = <&P8_42_gpio_pin>; + pinctrl-2 = <&P8_42_gpio_pu_pin>; + pinctrl-3 = <&P8_42_gpio_pd_pin>; + pinctrl-4 = <&P8_42_gpio_input_pin>; + pinctrl-5 = <&P8_42_qep_pin>; + pinctrl-6 = <&P8_42_pruout_pin>; + pinctrl-7 = <&P8_42_pruin_pin>; + }; + + /* P8_43 (ZCZ ball R3) hdmi */ + P8_43_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_43_default_pin>; + pinctrl-1 = <&P8_43_gpio_pin>; + pinctrl-2 = <&P8_43_gpio_pu_pin>; + pinctrl-3 = <&P8_43_gpio_pd_pin>; + pinctrl-4 = <&P8_43_gpio_input_pin>; + pinctrl-5 = <&P8_43_pwm_pin>; + pinctrl-6 = <&P8_43_pruout_pin>; + pinctrl-7 = <&P8_43_pruin_pin>; + }; + + /* P8_44 (ZCZ ball R4) hdmi */ + P8_44_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_44_default_pin>; + pinctrl-1 = <&P8_44_gpio_pin>; + pinctrl-2 = <&P8_44_gpio_pu_pin>; + pinctrl-3 = <&P8_44_gpio_pd_pin>; + pinctrl-4 = <&P8_44_gpio_input_pin>; + pinctrl-5 = <&P8_44_pwm_pin>; + pinctrl-6 = <&P8_44_pruout_pin>; + pinctrl-7 = <&P8_44_pruin_pin>; + }; + + /* P8_45 (ZCZ ball R1) hdmi */ + P8_45_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_45_default_pin>; + pinctrl-1 = <&P8_45_gpio_pin>; + pinctrl-2 = <&P8_45_gpio_pu_pin>; + pinctrl-3 = <&P8_45_gpio_pd_pin>; + pinctrl-4 = <&P8_45_gpio_input_pin>; + pinctrl-5 = <&P8_45_pwm_pin>; + pinctrl-6 = <&P8_45_pruout_pin>; + pinctrl-7 = <&P8_45_pruin_pin>; + }; + + /* P8_46 (ZCZ ball R2) hdmi */ + P8_46_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_46_default_pin>; + pinctrl-1 = <&P8_46_gpio_pin>; + pinctrl-2 = <&P8_46_gpio_pu_pin>; + pinctrl-3 = <&P8_46_gpio_pd_pin>; + pinctrl-4 = <&P8_46_gpio_input_pin>; + pinctrl-5 = <&P8_46_pwm_pin>; + pinctrl-6 = <&P8_46_pruout_pin>; + pinctrl-7 = <&P8_46_pruin_pin>; + }; + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + + /* P9_02 GND */ + + /* P9_03 3V3 */ + + /* P9_04 3V3 */ + + /* P9_05 VDD_5V */ + + /* P9_06 VDD_5V */ + + /* P9_07 SYS_5V */ + + /* P9_08 SYS_5V */ + + /* P9_09 PWR_BUT */ + + /* P9_10 RSTn */ + + /* P9_11 (ZCZ ball T17) */ + P9_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart"; + pinctrl-0 = <&P9_11_default_pin>; + pinctrl-1 = <&P9_11_gpio_pin>; + pinctrl-2 = <&P9_11_gpio_pu_pin>; + pinctrl-3 = <&P9_11_gpio_pd_pin>; + pinctrl-4 = <&P9_11_gpio_input_pin>; + pinctrl-5 = <&P9_11_uart_pin>; + }; + + /* P9_12 (ZCZ ball U18) */ + P9_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P9_12_default_pin>; + pinctrl-1 = <&P9_12_gpio_pin>; + pinctrl-2 = <&P9_12_gpio_pu_pin>; + pinctrl-3 = <&P9_12_gpio_pd_pin>; + pinctrl-4 = <&P9_12_gpio_input_pin>; + }; + + /* P9_13 (ZCZ ball U17) */ + P9_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart"; + pinctrl-0 = <&P9_13_default_pin>; + pinctrl-1 = <&P9_13_gpio_pin>; + pinctrl-2 = <&P9_13_gpio_pu_pin>; + pinctrl-3 = <&P9_13_gpio_pd_pin>; + pinctrl-4 = <&P9_13_gpio_input_pin>; + pinctrl-5 = <&P9_13_uart_pin>; + }; + + /* P9_14 (ZCZ ball U14) */ + P9_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_14_default_pin>; + pinctrl-1 = <&P9_14_gpio_pin>; + pinctrl-2 = <&P9_14_gpio_pu_pin>; + pinctrl-3 = <&P9_14_gpio_pd_pin>; + pinctrl-4 = <&P9_14_gpio_input_pin>; + pinctrl-5 = <&P9_14_pwm_pin>; + }; + + /* P9_15 (ZCZ ball R13) */ + P9_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_15_default_pin>; + pinctrl-1 = <&P9_15_gpio_pin>; + pinctrl-2 = <&P9_15_gpio_pu_pin>; + pinctrl-3 = <&P9_15_gpio_pd_pin>; + pinctrl-4 = <&P9_15_gpio_input_pin>; + pinctrl-5 = <&P9_15_pwm_pin>; + }; + + /* P9_16 (ZCZ ball T14) */ + P9_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_16_default_pin>; + pinctrl-1 = <&P9_16_gpio_pin>; + pinctrl-2 = <&P9_16_gpio_pu_pin>; + pinctrl-3 = <&P9_16_gpio_pd_pin>; + pinctrl-4 = <&P9_16_gpio_input_pin>; + pinctrl-5 = <&P9_16_pwm_pin>; + }; + + /* P9_17 (ZCZ ball A16) */ + P9_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_17_default_pin>; + pinctrl-1 = <&P9_17_gpio_pin>; + pinctrl-2 = <&P9_17_gpio_pu_pin>; + pinctrl-3 = <&P9_17_gpio_pd_pin>; + pinctrl-4 = <&P9_17_gpio_input_pin>; + pinctrl-5 = <&P9_17_spi_cs_pin>; + pinctrl-6 = <&P9_17_i2c_pin>; + pinctrl-7 = <&P9_17_pwm_pin>; + pinctrl-8 = <&P9_17_pru_uart_pin>; + }; + + /* P9_18 (ZCZ ball B16) */ + P9_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_18_default_pin>; + pinctrl-1 = <&P9_18_gpio_pin>; + pinctrl-2 = <&P9_18_gpio_pu_pin>; + pinctrl-3 = <&P9_18_gpio_pd_pin>; + pinctrl-4 = <&P9_18_gpio_input_pin>; + pinctrl-5 = <&P9_18_spi_pin>; + pinctrl-6 = <&P9_18_i2c_pin>; + pinctrl-7 = <&P9_18_pwm_pin>; + pinctrl-8 = <&P9_18_pru_uart_pin>; + }; + + /* P9_19 (ZCZ ball D17) i2c */ + P9_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer"; + pinctrl-0 = <&P9_19_default_pin>; + pinctrl-1 = <&P9_19_gpio_pin>; + pinctrl-2 = <&P9_19_gpio_pu_pin>; + pinctrl-3 = <&P9_19_gpio_pd_pin>; + pinctrl-4 = <&P9_19_gpio_input_pin>; + pinctrl-5 = <&P9_19_spi_cs_pin>; + pinctrl-6 = <&P9_19_can_pin>; + pinctrl-7 = <&P9_19_i2c_pin>; + pinctrl-8 = <&P9_19_pru_uart_pin>; + pinctrl-9 = <&P9_19_timer_pin>; + }; + + /* P9_20 (ZCZ ball D18) i2c */ + P9_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer"; + pinctrl-0 = <&P9_20_default_pin>; + pinctrl-1 = <&P9_20_gpio_pin>; + pinctrl-2 = <&P9_20_gpio_pu_pin>; + pinctrl-3 = <&P9_20_gpio_pd_pin>; + pinctrl-4 = <&P9_20_gpio_input_pin>; + pinctrl-5 = <&P9_20_spi_cs_pin>; + pinctrl-6 = <&P9_20_can_pin>; + pinctrl-7 = <&P9_20_i2c_pin>; + pinctrl-8 = <&P9_20_pru_uart_pin>; + pinctrl-9 = <&P9_20_timer_pin>; + }; + + /* P9_21 (ZCZ ball B17) */ + P9_21_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "uart", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_21_default_pin>; + pinctrl-1 = <&P9_21_gpio_pin>; + pinctrl-2 = <&P9_21_gpio_pu_pin>; + pinctrl-3 = <&P9_21_gpio_pd_pin>; + pinctrl-4 = <&P9_21_gpio_input_pin>; + pinctrl-5 = <&P9_21_spi_pin>; + pinctrl-6 = <&P9_21_uart_pin>; + pinctrl-7 = <&P9_21_i2c_pin>; + pinctrl-8 = <&P9_21_pwm_pin>; + pinctrl-9 = <&P9_21_pru_uart_pin>; + }; + + /* P9_22 (ZCZ ball A17) */ + P9_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "uart", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_22_default_pin>; + pinctrl-1 = <&P9_22_gpio_pin>; + pinctrl-2 = <&P9_22_gpio_pu_pin>; + pinctrl-3 = <&P9_22_gpio_pd_pin>; + pinctrl-4 = <&P9_22_gpio_input_pin>; + pinctrl-5 = <&P9_22_spi_sclk_pin>; + pinctrl-6 = <&P9_22_uart_pin>; + pinctrl-7 = <&P9_22_i2c_pin>; + pinctrl-8 = <&P9_22_pwm_pin>; + pinctrl-9 = <&P9_22_pru_uart_pin>; + }; + + /* P9_23 (ZCZ ball V14) */ + P9_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_23_default_pin>; + pinctrl-1 = <&P9_23_gpio_pin>; + pinctrl-2 = <&P9_23_gpio_pu_pin>; + pinctrl-3 = <&P9_23_gpio_pd_pin>; + pinctrl-4 = <&P9_23_gpio_input_pin>; + pinctrl-5 = <&P9_23_pwm_pin>; + }; + + /* P9_24 (ZCZ ball D15) */ + P9_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin"; + pinctrl-0 = <&P9_24_default_pin>; + pinctrl-1 = <&P9_24_gpio_pin>; + pinctrl-2 = <&P9_24_gpio_pu_pin>; + pinctrl-3 = <&P9_24_gpio_pd_pin>; + pinctrl-4 = <&P9_24_gpio_input_pin>; + pinctrl-5 = <&P9_24_uart_pin>; + pinctrl-6 = <&P9_24_can_pin>; + pinctrl-7 = <&P9_24_i2c_pin>; + pinctrl-8 = <&P9_24_pru_uart_pin>; + pinctrl-9 = <&P9_24_pruin_pin>; + }; + + /* P9_25 (ZCZ ball A14) audio */ + P9_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_25_default_pin>; + pinctrl-1 = <&P9_25_gpio_pin>; + pinctrl-2 = <&P9_25_gpio_pu_pin>; + pinctrl-3 = <&P9_25_gpio_pd_pin>; + pinctrl-4 = <&P9_25_gpio_input_pin>; + pinctrl-5 = <&P9_25_qep_pin>; + pinctrl-6 = <&P9_25_pruout_pin>; + pinctrl-7 = <&P9_25_pruin_pin>; + }; + + /* P9_26 (ZCZ ball D16) */ + P9_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin"; + pinctrl-0 = <&P9_26_default_pin>; + pinctrl-1 = <&P9_26_gpio_pin>; + pinctrl-2 = <&P9_26_gpio_pu_pin>; + pinctrl-3 = <&P9_26_gpio_pd_pin>; + pinctrl-4 = <&P9_26_gpio_input_pin>; + pinctrl-5 = <&P9_26_uart_pin>; + pinctrl-6 = <&P9_26_can_pin>; + pinctrl-7 = <&P9_26_i2c_pin>; + pinctrl-8 = <&P9_26_pru_uart_pin>; + pinctrl-9 = <&P9_26_pruin_pin>; + }; + + /* P9_27 (ZCZ ball C13) */ + P9_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_27_default_pin>; + pinctrl-1 = <&P9_27_gpio_pin>; + pinctrl-2 = <&P9_27_gpio_pu_pin>; + pinctrl-3 = <&P9_27_gpio_pd_pin>; + pinctrl-4 = <&P9_27_gpio_input_pin>; + pinctrl-5 = <&P9_27_qep_pin>; + pinctrl-6 = <&P9_27_pruout_pin>; + pinctrl-7 = <&P9_27_pruin_pin>; + }; + + /* P9_28 (ZCZ ball C12) audio */ + P9_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "pwm", "pwm2", "pruout", "pruin"; + pinctrl-0 = <&P9_28_default_pin>; + pinctrl-1 = <&P9_28_gpio_pin>; + pinctrl-2 = <&P9_28_gpio_pu_pin>; + pinctrl-3 = <&P9_28_gpio_pd_pin>; + pinctrl-4 = <&P9_28_gpio_input_pin>; + pinctrl-5 = <&P9_28_spi_cs_pin>; + pinctrl-6 = <&P9_28_pwm_pin>; + pinctrl-7 = <&P9_28_pwm2_pin>; + pinctrl-8 = <&P9_28_pruout_pin>; + pinctrl-9 = <&P9_28_pruin_pin>; + }; + + /* P9_29 (ZCZ ball B13) audio */ + P9_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P9_29_default_pin>; + pinctrl-1 = <&P9_29_gpio_pin>; + pinctrl-2 = <&P9_29_gpio_pu_pin>; + pinctrl-3 = <&P9_29_gpio_pd_pin>; + pinctrl-4 = <&P9_29_gpio_input_pin>; + pinctrl-5 = <&P9_29_spi_pin>; + pinctrl-6 = <&P9_29_pwm_pin>; + pinctrl-7 = <&P9_29_pruout_pin>; + pinctrl-8 = <&P9_29_pruin_pin>; + }; + + /* P9_30 (ZCZ ball D12) gpio-hog wl1835 */ + + /* P9_31 (ZCZ ball A13) audio */ + P9_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P9_31_default_pin>; + pinctrl-1 = <&P9_31_gpio_pin>; + pinctrl-2 = <&P9_31_gpio_pu_pin>; + pinctrl-3 = <&P9_31_gpio_pd_pin>; + pinctrl-4 = <&P9_31_gpio_input_pin>; + pinctrl-5 = <&P9_31_spi_sclk_pin>; + pinctrl-6 = <&P9_31_pwm_pin>; + pinctrl-7 = <&P9_31_pruout_pin>; + pinctrl-8 = <&P9_31_pruin_pin>; + }; + + /* P9_32 VADC */ + + /* P9_33 (ZCZ ball C8) AIN4 */ + + /* P9_34 AGND */ + + /* P9_35 (ZCZ ball A8) AIN6 */ + + /* P9_36 (ZCZ ball B8) AIN5 */ + + /* P9_37 (ZCZ ball B7) AIN2 */ + + /* P9_38 (ZCZ ball A7) AIN3 */ + + /* P9_39 (ZCZ ball B6) AIN0 */ + + /* P9_40 (ZCZ ball C7) AIN1 */ + + /* P9_41 (ZCZ ball D14) */ + P9_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer", "pruin"; + pinctrl-0 = <&P9_41_default_pin>; + pinctrl-1 = <&P9_41_gpio_pin>; + pinctrl-2 = <&P9_41_gpio_pu_pin>; + pinctrl-3 = <&P9_41_gpio_pd_pin>; + pinctrl-4 = <&P9_41_gpio_input_pin>; + pinctrl-5 = <&P9_41_timer_pin>; + pinctrl-6 = <&P9_41_pruin_pin>; + }; + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) */ + P9_91_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_91_default_pin>; + pinctrl-1 = <&P9_91_gpio_pin>; + pinctrl-2 = <&P9_91_gpio_pu_pin>; + pinctrl-3 = <&P9_91_gpio_pd_pin>; + pinctrl-4 = <&P9_91_gpio_input_pin>; + pinctrl-5 = <&P9_91_qep_pin>; + pinctrl-6 = <&P9_91_pruout_pin>; + pinctrl-7 = <&P9_91_pruin_pin>; + }; + + /* P9_42 (ZCZ ball C18) */ + P9_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "spi_sclk", "uart", "pwm", "pru_ecap"; + pinctrl-0 = <&P9_42_default_pin>; + pinctrl-1 = <&P9_42_gpio_pin>; + pinctrl-2 = <&P9_42_gpio_pu_pin>; + pinctrl-3 = <&P9_42_gpio_pd_pin>; + pinctrl-4 = <&P9_42_gpio_input_pin>; + pinctrl-5 = <&P9_42_spi_cs_pin>; + pinctrl-6 = <&P9_42_spi_sclk_pin>; + pinctrl-7 = <&P9_42_uart_pin>; + pinctrl-8 = <&P9_42_pwm_pin>; + pinctrl-9 = <&P9_42_pru_ecap_pin>; + }; + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) */ + P9_92_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_92_default_pin>; + pinctrl-1 = <&P9_92_gpio_pin>; + pinctrl-2 = <&P9_92_gpio_pu_pin>; + pinctrl-3 = <&P9_92_gpio_pd_pin>; + pinctrl-4 = <&P9_92_gpio_input_pin>; + pinctrl-5 = <&P9_92_qep_pin>; + pinctrl-6 = <&P9_92_pruout_pin>; + pinctrl-7 = <&P9_92_pruin_pin>; + }; + + /* P9_43 GND */ + + /* P9_44 GND */ + + /* P9_45 GND */ + + /* P9_46 GND */ + + + cape-universal { + compatible = "gpio-of-helper"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + P8_03 { + gpio-name = "P8_03"; + gpio = <&gpio1 6 0>; + input; + dir-changeable; + }; + + P8_04 { + gpio-name = "P8_04"; + gpio = <&gpio1 7 0>; + input; + dir-changeable; + }; + + P8_05 { + gpio-name = "P8_05"; + gpio = <&gpio1 2 0>; + input; + dir-changeable; + }; + + P8_06 { + gpio-name = "P8_06"; + gpio = <&gpio1 3 0>; + input; + dir-changeable; + }; + + P8_07 { + gpio-name = "P8_07"; + gpio = <&gpio2 2 0>; + input; + dir-changeable; + }; + + P8_08 { + gpio-name = "P8_08"; + gpio = <&gpio2 3 0>; + input; + dir-changeable; + }; + + P8_09 { + gpio-name = "P8_09"; + gpio = <&gpio2 5 0>; + input; + dir-changeable; + }; + + P8_10 { + gpio-name = "P8_10"; + gpio = <&gpio2 4 0>; + input; + dir-changeable; + }; + + P8_11 { + gpio-name = "P8_11"; + gpio = <&gpio1 13 0>; + input; + dir-changeable; + }; + + P8_12 { + gpio-name = "P8_12"; + gpio = <&gpio1 12 0>; + input; + dir-changeable; + }; + + P8_13 { + gpio-name = "P8_13"; + gpio = <&gpio0 23 0>; + input; + dir-changeable; + }; + + P8_15 { + gpio-name = "P8_15"; + gpio = <&gpio1 15 0>; + input; + dir-changeable; + }; + + P8_16 { + gpio-name = "P8_16"; + gpio = <&gpio1 14 0>; + input; + dir-changeable; + }; + + P8_18 { + gpio-name = "P8_18"; + gpio = <&gpio2 1 0>; + input; + dir-changeable; + }; + + P8_19 { + gpio-name = "P8_19"; + gpio = <&gpio0 22 0>; + input; + dir-changeable; + }; + + P8_20 { + gpio-name = "P8_20"; + gpio = <&gpio1 31 0>; + input; + dir-changeable; + }; + + P8_21 { + gpio-name = "P8_21"; + gpio = <&gpio1 30 0>; + input; + dir-changeable; + }; + + P8_22 { + gpio-name = "P8_22"; + gpio = <&gpio1 5 0>; + input; + dir-changeable; + }; + + P8_23 { + gpio-name = "P8_23"; + gpio = <&gpio1 4 0>; + input; + dir-changeable; + }; + + P8_24 { + gpio-name = "P8_24"; + gpio = <&gpio1 1 0>; + input; + dir-changeable; + }; + + P8_25 { + gpio-name = "P8_25"; + gpio = <&gpio1 0 0>; + input; + dir-changeable; + }; + + P8_27 { + gpio-name = "P8_27"; + gpio = <&gpio2 22 0>; + input; + dir-changeable; + }; + + P8_28 { + gpio-name = "P8_28"; + gpio = <&gpio2 24 0>; + input; + dir-changeable; + }; + + P8_29 { + gpio-name = "P8_29"; + gpio = <&gpio2 23 0>; + input; + dir-changeable; + }; + + P8_30 { + gpio-name = "P8_30"; + gpio = <&gpio2 25 0>; + input; + dir-changeable; + }; + + P8_31 { + gpio-name = "P8_31"; + gpio = <&gpio0 10 0>; + input; + dir-changeable; + }; + + P8_32 { + gpio-name = "P8_32"; + gpio = <&gpio0 11 0>; + input; + dir-changeable; + }; + + P8_33 { + gpio-name = "P8_33"; + gpio = <&gpio0 9 0>; + input; + dir-changeable; + }; + + P8_34 { + gpio-name = "P8_34"; + gpio = <&gpio2 17 0>; + input; + dir-changeable; + }; + + P8_35 { + gpio-name = "P8_35"; + gpio = <&gpio0 8 0>; + input; + dir-changeable; + }; + + P8_36 { + gpio-name = "P8_36"; + gpio = <&gpio2 16 0>; + input; + dir-changeable; + }; + + P8_37 { + gpio-name = "P8_37"; + gpio = <&gpio2 14 0>; + input; + dir-changeable; + }; + + P8_38 { + gpio-name = "P8_38"; + gpio = <&gpio2 15 0>; + input; + dir-changeable; + }; + + P8_39 { + gpio-name = "P8_39"; + gpio = <&gpio2 12 0>; + input; + dir-changeable; + }; + + P8_40 { + gpio-name = "P8_40"; + gpio = <&gpio2 13 0>; + input; + dir-changeable; + }; + + P8_41 { + gpio-name = "P8_41"; + gpio = <&gpio2 10 0>; + input; + dir-changeable; + }; + + P8_42 { + gpio-name = "P8_42"; + gpio = <&gpio2 11 0>; + input; + dir-changeable; + }; + + P8_43 { + gpio-name = "P8_43"; + gpio = <&gpio2 8 0>; + input; + dir-changeable; + }; + + P8_44 { + gpio-name = "P8_44"; + gpio = <&gpio2 9 0>; + input; + dir-changeable; + }; + + P8_45 { + gpio-name = "P8_45"; + gpio = <&gpio2 6 0>; + input; + dir-changeable; + }; + + P8_46 { + gpio-name = "P8_46"; + gpio = <&gpio2 7 0>; + input; + dir-changeable; + }; + + P9_11 { + gpio-name = "P9_11"; + gpio = <&gpio0 30 0>; + input; + dir-changeable; + }; + + P9_12 { + gpio-name = "P9_12"; + gpio = <&gpio1 28 0>; + input; + dir-changeable; + }; + + P9_13 { + gpio-name = "P9_13"; + gpio = <&gpio0 31 0>; + input; + dir-changeable; + }; + + P9_14 { + gpio-name = "P9_14"; + gpio = <&gpio1 18 0>; + input; + dir-changeable; + }; + + P9_15 { + gpio-name = "P9_15"; + gpio = <&gpio1 16 0>; + input; + dir-changeable; + }; + + P9_16 { + gpio-name = "P9_16"; + gpio = <&gpio1 19 0>; + input; + dir-changeable; + }; + + P9_17 { + gpio-name = "P9_17"; + gpio = <&gpio0 5 0>; + input; + dir-changeable; + }; + + P9_18 { + gpio-name = "P9_18"; + gpio = <&gpio0 4 0>; + input; + dir-changeable; + }; + + P9_19 { + gpio-name = "P9_19"; + gpio = <&gpio0 13 0>; + input; + dir-changeable; + }; + + P9_20 { + gpio-name = "P9_20"; + gpio = <&gpio0 12 0>; + input; + dir-changeable; + }; + + P9_21 { + gpio-name = "P9_21"; + gpio = <&gpio0 3 0>; + input; + dir-changeable; + }; + + P9_22 { + gpio-name = "P9_22"; + gpio = <&gpio0 2 0>; + input; + dir-changeable; + }; + + P9_23 { + gpio-name = "P9_23"; + gpio = <&gpio1 17 0>; + input; + dir-changeable; + }; + + P9_24 { + gpio-name = "P9_24"; + gpio = <&gpio0 15 0>; + input; + dir-changeable; + }; + + P9_25 { + gpio-name = "P9_25"; + gpio = <&gpio3 21 0>; + input; + dir-changeable; + }; + + P9_26 { + gpio-name = "P9_26"; + gpio = <&gpio0 14 0>; + input; + dir-changeable; + }; + + P9_27 { + gpio-name = "P9_27"; + gpio = <&gpio3 19 0>; + input; + dir-changeable; + }; + + P9_28 { + gpio-name = "P9_28"; + gpio = <&gpio3 17 0>; + input; + dir-changeable; + }; + + P9_29 { + gpio-name = "P9_29"; + gpio = <&gpio3 15 0>; + input; + dir-changeable; + }; + + P9_31 { + gpio-name = "P9_31"; + gpio = <&gpio3 14 0>; + input; + dir-changeable; + }; + + P9_41 { + gpio-name = "P9_41"; + gpio = <&gpio0 20 0>; + input; + dir-changeable; + }; + + P9_91 { + gpio-name = "P9_91"; + gpio = <&gpio3 20 0>; + input; + dir-changeable; + }; + + P9_42 { + gpio-name = "P9_42"; + gpio = <&gpio0 7 0>; + input; + dir-changeable; + }; + + P9_92 { + gpio-name = "P9_92"; + gpio = <&gpio3 18 0>; + input; + dir-changeable; + }; + + }; +}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-wireless-uboot-univ.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless-uboot-univ.dts new file mode 100644 index 0000000..5d87c70 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless-uboot-univ.dts @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-wireless-common-univ.dtsi" + +/ { + model = "TI AM335x BeagleBone Green Wireless"; + compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&gpio1 { + ls_buf_en { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LS_BUF_EN"; + }; +}; + +/* BT_AUD_OUT from wl1835 has to be pulled low when WL_EN is activated.*/ +/* in case it isn't, wilink8 ends up in one of the test modes that */ +/* intruces various issues (elp wkaeup timeouts etc.) */ +/* On the BBGW this pin is routed through the level shifter (U21) that */ +/* introduces a pullup on the line and wilink8 ends up in a bad state. */ +/* use a gpio hog to force this pin low. An alternative may be adding */ +/* an external pulldown on U21 pin 4. */ + +&gpio3 { + bt_aud_in { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "MCASP0_AHCLKR"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts index 57731f0..de299ad 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -11,6 +11,7 @@ #include "am335x-bone-common.dtsi" #include "am335x-bonegreen-common.dtsi" #include +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone Green Wireless"; diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts index a8b4d96..575a5a9 100644 --- a/arch/arm/boot/dts/am335x-bonegreen.dts +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -10,6 +10,7 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" #include "am335x-bonegreen-common.dtsi" +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone Green"; diff --git b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi new file mode 100644 index 0000000..d2704c6 --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +#include "am335x-peripheral-ttyS1.dtsi" +#include "am335x-bone-pinmux-ttyS1.dtsi" + +#include "am335x-peripheral-ttyS2.dtsi" +#include "am335x-bone-pinmux-ttyS2.dtsi" + +#include "am335x-peripheral-ttyS4.dtsi" +#include "am335x-bone-pinmux-ttyS4.dtsi" + +&am33xx_pinmux { + user_leds_s1: user_leds_s1 { + pinctrl-single,pins = < + 0x98 0x7 /* gpmc_wen.gpio2_4, OUTPUT | MODE7 */ + 0x9c 0x7 /* gpmc_ben0_cle.gpio2_5, OUTPUT | MODE7 */ + >; + }; + + bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins { + pinctrl-single,pins = < + BONE_P9_14 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + >; + }; + + keymap3_pins: pinmux_keymap3_pins { + pinctrl-single,pins = < + 0x040 0x2f /* KEY_UP gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ + 0x04c 0x2f /* KEY_DOWN gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ + 0x078 0x2f /* KEY_RIGHT gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */ + 0x164 0x2f /* KEY_LEFT ecap0_in_pwm0_out.gpio0_7, INPUT | PULLDIS | MODE7 */ + 0x1a4 0x2f /* KEY_ENTER mcasp0_fxr.gpio3_19, INPUT | PULLDIS | MODE7 */ + >; + }; + + edt_ft5306_ts_pins: pinmux_edt_ft5306_ts_pins { + pinctrl-single,pins = < + /* CAP_TSC gpmc_a1.gpio1_17, INPUT | MODE7 */ + BONE_P9_23 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + /* spi0_d1.i2c1_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_18 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + /* spi0_cs0.i2c1_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_17 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + >; + }; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,pins = < + 0x190 0x20 /* mcasp0_aclkx.mcasp0_aclkx, INPUT | MODE0 */ + 0x194 0x20 /* mcasp0_fsx.mcasp0_fsx, INPUT | MODE0 */ + 0x198 0x20 /* mcasp0_axr0.mcasp0_axr0, INPUT | MODE0 */ + 0x19c 0x22 /* mcasp0_ahclkr.mcasp0_axr2, INPUT | MODE2 */ + >; + }; +}; + +&epwmss1 { + status = "okay"; +}; + + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&bb_lcd_pwm_backlight_pins>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + edt-ft5306@38 { + status = "okay"; + compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5306_ts_pins>; + + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <17 0>; + + touchscreen-size-x = <600>; + touchscreen-size-y = <1024>; + touchscreen-inverted-x; + touchscreen-inverted-y; + touchscreen-swapped-x-y; + }; + + tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +/ { + backlight { + status = "okay"; + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keymap3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + linux,code = <105>; + label = "left"; + gpios = <&gpio0 7 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@2 { + debounce_interval = <50>; + linux,code = <106>; + label = "right"; + gpios = <&gpio1 28 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@3 { + debounce_interval = <50>; + linux,code = <103>; + label = "up"; + gpios = <&gpio1 16 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@4 { + debounce_interval = <50>; + linux,code = <108>; + label = "down"; + gpios = <&gpio1 19 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@5 { + debounce_interval = <50>; + linux,code = <28>; + label = "enter"; + gpios = <&gpio3 19 0x1>; + gpio-key,wakeup; + }; + }; + + gpio-leds-cape-lcd { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pinctrl-0 = <&user_leds_s1>; + + lcd-led0 { + label = "lcd:green:usr0"; + gpios = <&gpio2 4 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + lcd-led1 { + label = "lcd:green:usr1"; + gpios = <&gpio2 5 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack"; + }; +}; + +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" +#include "am335x-bone-pinmux-panel-1024x600-24bit.dtsi" diff --git b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi new file mode 100644 index 0000000..539409c --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +#include "am335x-peripheral-ttyS1.dtsi" +#include "am335x-bone-pinmux-ttyS1.dtsi" + +#include "am335x-peripheral-ttyS2.dtsi" +#include "am335x-bone-pinmux-ttyS2.dtsi" + +#include "am335x-peripheral-ttyS4.dtsi" +#include "am335x-bone-pinmux-ttyS4.dtsi" + +&am33xx_pinmux { + user_leds_s1: user_leds_s1 { + pinctrl-single,pins = < + 0x98 0x7 /* gpmc_wen.gpio2_4, OUTPUT | MODE7 */ + 0x9c 0x7 /* gpmc_ben0_cle.gpio2_5, OUTPUT | MODE7 */ + >; + }; + + bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins { + pinctrl-single,pins = < + BONE_P9_14 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + >; + }; + + keymap3_pins: pinmux_keymap3_pins { + pinctrl-single,pins = < + 0x040 0x2f /* KEY_UP gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ + 0x04c 0x2f /* KEY_DOWN gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ + 0x078 0x2f /* KEY_RIGHT gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */ + 0x164 0x2f /* KEY_LEFT ecap0_in_pwm0_out.gpio0_7, INPUT | PULLDIS | MODE7 */ + 0x1a4 0x2f /* KEY_ENTER mcasp0_fxr.gpio3_19, INPUT | PULLDIS | MODE7 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + /* spi0_d1.i2c1_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_18 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + /* spi0_cs0.i2c1_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_17 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + >; + }; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,pins = < + 0x190 0x20 /* mcasp0_aclkx.mcasp0_aclkx, INPUT | MODE0 */ + 0x194 0x20 /* mcasp0_fsx.mcasp0_fsx, INPUT | MODE0 */ + 0x198 0x20 /* mcasp0_axr0.mcasp0_axr0, INPUT | MODE0 */ + 0x19c 0x22 /* mcasp0_ahclkr.mcasp0_axr2, INPUT | MODE2 */ + >; + }; +}; + +&epwmss1 { + status = "okay"; +}; + + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&bb_lcd_pwm_backlight_pins>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +/ { + backlight { + status = "okay"; + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keymap3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + linux,code = <105>; + label = "left"; + gpios = <&gpio0 7 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@2 { + debounce_interval = <50>; + linux,code = <106>; + label = "right"; + gpios = <&gpio1 28 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@3 { + debounce_interval = <50>; + linux,code = <103>; + label = "up"; + gpios = <&gpio1 16 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@4 { + debounce_interval = <50>; + linux,code = <108>; + label = "down"; + gpios = <&gpio1 19 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@5 { + debounce_interval = <50>; + linux,code = <28>; + label = "enter"; + gpios = <&gpio3 19 0x1>; + gpio-key,wakeup; + }; + }; + + gpio-leds-cape-lcd { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pinctrl-0 = <&user_leds_s1>; + + lcd-led0 { + label = "lcd:green:usr0"; + gpios = <&gpio2 4 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + lcd-led1 { + label = "lcd:green:usr1"; + gpios = <&gpio2 5 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack"; + }; +}; + +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" +#include "am335x-bone-pinmux-panel-1024x600-24bit.dtsi" diff --git b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi new file mode 100644 index 0000000..bce6ac5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +&am33xx_pinmux { + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + BONE_P9_20 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_ctsn.i2c2_sda */ + BONE_P9_19 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_rtsn.i2c2_scl */ + >; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + rtc@68 { + compatible = "maxim,ds1307"; + reg = <0x68>; + }; +}; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index 85cd1d0..b68b15f 100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -13,6 +13,7 @@ #include #include +/* #include "am335x-bone-jtag.dtsi" */ / { model = "Octavo Systems OSD3358-SM-RED"; @@ -40,7 +41,6 @@ &am33xx_pinmux { nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ @@ -64,12 +64,6 @@ >; }; - nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - >; - }; - mcasp0_pins: mcasp0-pins { pinctrl-single,pins = < AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ @@ -124,9 +118,8 @@ compatible = "nxp,tda998x"; reg = <0x70>; - pinctrl-names = "default", "off"; + pinctrl-names = "default"; pinctrl-0 = <&nxp_hdmi_bonelt_pins>; - pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ /* video-ports = <0x234501>; */ @@ -264,9 +257,6 @@ }; &am33xx_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin>; - user_leds_s0: user-leds-s0 { pinctrl-single,pins = < AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ @@ -290,12 +280,6 @@ >; }; - clkout2_pin: pinmux-clkout2-pin { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; - }; - cpsw_default: cpsw-default { pinctrl-single,pins = < /* Slave 1 */ diff --git b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi new file mode 100644 index 0000000..4335e39 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&dcan0 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi new file mode 100644 index 0000000..02b5bd1 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&dcan1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi new file mode 100644 index 0000000..603f34e --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + + bus-width = <8>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi new file mode 100644 index 0000000..ed9a0b5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&i2c2 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi new file mode 100644 index 0000000..1dfd26a --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi new file mode 100644 index 0000000..f7c8f8a --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&lcdc { + status = "okay"; + blue-and-red-wiring = "crossed"; +}; + +/ { + panel { + status = "okay"; + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <0>; + raster-order = <1>; + fifo-th = <0>; + }; + display-timings { + native-mode = <&timing0>; + timing0: 1024x600 { + clock-frequency = <36000000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <1>; + hback-porch = <45>; + hsync-len = <30>; + vback-porch = <22>; + vfront-porch = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi new file mode 100644 index 0000000..969e352 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi0 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi new file mode 100644 index 0000000..ac5fe97 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi new file mode 100644 index 0000000..ac5fe97 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi new file mode 100644 index 0000000..f59fa4c --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi new file mode 100644 index 0000000..a25d6cf --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart2 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi new file mode 100644 index 0000000..adc89f0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart4 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi new file mode 100644 index 0000000..8b42fb0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart5 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index 62fe5ca..58e0122 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -60,24 +60,24 @@ }; &am33xx_pinmux { - i2c2_pins: pinmux-i2c2-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ - >; - }; +// i2c2_pins: pinmux-i2c2-pins { +// pinctrl-single,pins = < +// AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ +// AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ +// >; +// }; - ehrpwm0_pins: pinmux-ehrpwm0-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */ - >; - }; +// ehrpwm0_pins: pinmux-ehrpwm0-pins { +// pinctrl-single,pins = < +// AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */ +// >; +// }; - ehrpwm1_pins: pinmux-ehrpwm1-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */ - >; - }; +// ehrpwm1_pins: pinmux-ehrpwm1-pins { +// pinctrl-single,pins = < +// AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */ +// >; +// }; mmc0_pins: pinmux-mmc0-pins { pinctrl-single,pins = < @@ -88,27 +88,26 @@ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */ >; }; - spi0_pins: pinmux-spi0-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */ - >; - }; +// spi0_pins: pinmux-spi0-pins { +// pinctrl-single,pins = < +// AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */ +// AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */ +// AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */ +// AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */ +// >; +// }; - spi1_pins: pinmux-spi1-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */ - AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */ - AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */ - >; - }; +// spi1_pins: pinmux-spi1-pins { +// pinctrl-single,pins = < +// AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */ +// AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */ +// AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */ +// AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */ +// >; +// }; usr_leds_pins: pinmux-usr-leds-pins { pinctrl-single,pins = < @@ -126,12 +125,839 @@ >; }; - uart4_pins: pinmux-uart4-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ - AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */ - >; - }; +// uart4_pins: pinmux-uart4-pins { +// pinctrl-single,pins = < +// AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ +// AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */ +// >; +// }; + + /************************/ + /* P1 Header */ + /************************/ + + /* P1_01 VIN-AC */ + + /* P1_02 (ZCZ ball R5) gpio2_23 */ + P1_02_default_pin: pinmux_P1_02_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P1_02_gpio_pin: pinmux_P1_02_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P1_02_gpio_pu_pin: pinmux_P1_02_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P1_02_gpio_pd_pin: pinmux_P1_02_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P1_02_gpio_input_pin: pinmux_P1_02_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P1_02_pruout_pin: pinmux_P1_02_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_hsync.pru1_out9 */ + P1_02_pruin_pin: pinmux_P1_02_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_hsync.pru1_in9 */ + + /* P1_03 (ZCZ ball F15) usb1_vbus_out */ + + /* P1_04 (ZCZ ball R6) gpio2_25 */ + P1_04_default_pin: pinmux_P1_04_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P1_04_gpio_pin: pinmux_P1_04_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P1_04_gpio_pu_pin: pinmux_P1_04_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P1_04_gpio_pd_pin: pinmux_P1_04_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P1_04_gpio_input_pin: pinmux_P1_04_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P1_04_pruout_pin: pinmux_P1_04_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_ac_bias_en.pru1_out11 */ + P1_04_pruin_pin: pinmux_P1_04_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE6) >; }; /* lcd_ac_bias_en.pru1_in11 */ + + /* P1_05 (ZCZ ball T18) usb1_vbus_in */ + + /* P1_06 (ZCZ ball A16) spi0_cs0 */ + P1_06_default_pin: pinmux_P1_06_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_cs0.spi0_cs0 */ + P1_06_gpio_pin: pinmux_P1_06_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P1_06_gpio_pu_pin: pinmux_P1_06_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P1_06_gpio_pd_pin: pinmux_P1_06_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P1_06_gpio_input_pin: pinmux_P1_06_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_INPUT | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P1_06_spi_cs_pin: pinmux_P1_06_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_cs0.spi0_cs0 */ + P1_06_i2c_pin: pinmux_P1_06_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_cs0.i2c1_scl */ + P1_06_pwm_pin: pinmux_P1_06_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_cs0.ehrpwm0_synci */ + P1_06_pru_uart_pin: pinmux_P1_06_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_cs0.pr1_uart0_txd */ + + /* P1_07 VIN-USB */ + + /* P1_08 (ZCZ ball A17) spi0_sclk */ + P1_08_default_pin: pinmux_P1_08_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_sclk.spi0_sclk */ + P1_08_gpio_pin: pinmux_P1_08_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P1_08_gpio_pu_pin: pinmux_P1_08_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P1_08_gpio_pd_pin: pinmux_P1_08_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P1_08_gpio_input_pin: pinmux_P1_08_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_INPUT | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P1_08_spi_sclk_pin: pinmux_P1_08_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_sclk.spi0_sclk */ + P1_08_uart_pin: pinmux_P1_08_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* spi0_sclk.uart2_rxd */ + P1_08_i2c_pin: pinmux_P1_08_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_sclk.i2c2_sda */ + P1_08_pwm_pin: pinmux_P1_08_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_sclk.ehrpwm0a */ + P1_08_pru_uart_pin: pinmux_P1_08_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_sclk.pr1_uart0_cts_n */ + + /* P1_09 (ZCZ ball R18) USB1-DN */ + + /* P1_10 (ZCZ ball B17) spi0_d0 */ + P1_10_default_pin: pinmux_P1_10_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d0.spi0_d0 */ + P1_10_gpio_pin: pinmux_P1_10_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P1_10_gpio_pu_pin: pinmux_P1_10_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P1_10_gpio_pd_pin: pinmux_P1_10_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P1_10_gpio_input_pin: pinmux_P1_10_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_INPUT | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P1_10_spi_pin: pinmux_P1_10_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d0.spi0_d0 */ + P1_10_uart_pin: pinmux_P1_10_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* spi0_d0.uart2_txd */ + P1_10_i2c_pin: pinmux_P1_10_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_d0.i2c2_scl */ + P1_10_pwm_pin: pinmux_P1_10_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_d0.ehrpwm0b */ + P1_10_pru_uart_pin: pinmux_P1_10_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_d0.pr1_uart0_rts_n */ + + /* P1_11 (ZCZ ball R17) USB1-DP */ + + /* P1_12 (ZCZ ball B16) spi0_d1 */ + P1_12_default_pin: pinmux_P1_12_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d1.spi0_d1 */ + P1_12_gpio_pin: pinmux_P1_12_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P1_12_gpio_pu_pin: pinmux_P1_12_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P1_12_gpio_pd_pin: pinmux_P1_12_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P1_12_gpio_input_pin: pinmux_P1_12_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_INPUT | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P1_12_spi_pin: pinmux_P1_12_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d1.spi0_d1 */ + P1_12_i2c_pin: pinmux_P1_12_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_d1.i2c1_sda */ + P1_12_pwm_pin: pinmux_P1_12_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_d1.ehrpwm0_tripzone_input */ + P1_12_pru_uart_pin: pinmux_P1_12_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_d1.pr1_uart0_rxd */ + + /* P1_13 (ZCZ ball P17) USB1-ID */ + + /* P1_14 VOUT-3.3V */ + + /* P1_15 GND */ + + /* P1_16 GND */ + + /* P1_17 (ZCZ ball A9) VREFN */ + + /* P1_18 (ZCZ ball B9) VREFP */ + + /* P1_19 (ZCZ ball B6) AIN0 */ + + /* P1_20 (ZCZ ball D14) gpio0_20 */ + P1_20_default_pin: pinmux_P1_20_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P1_20_gpio_pin: pinmux_P1_20_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P1_20_gpio_pu_pin: pinmux_P1_20_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P1_20_gpio_pd_pin: pinmux_P1_20_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P1_20_gpio_input_pin: pinmux_P1_20_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P1_20_pruin_pin: pinmux_P1_20_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE5) >; }; /* xdma_event_intr1.pru0_in16 */ + + /* P1_21 (ZCZ ball C7) AIN1 */ + + /* P1_22 GND */ + + /* P1_23 (ZCZ ball B7) AIN2 */ + + /* P1_24 VOUT-5V */ + + /* P1_25 (ZCZ ball A7) AIN3 */ + + /* P1_26 (ZCZ ball D18) i2c2_sda */ + P1_26_default_pin: pinmux_P1_26_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */ + P1_26_gpio_pin: pinmux_P1_26_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P1_26_gpio_pu_pin: pinmux_P1_26_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P1_26_gpio_pd_pin: pinmux_P1_26_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P1_26_gpio_input_pin: pinmux_P1_26_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_INPUT | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P1_26_can_pin: pinmux_P1_26_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart1_ctsn.dcan0_tx */ + P1_26_i2c_pin: pinmux_P1_26_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */ + P1_26_spi_cs_pin: pinmux_P1_26_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_ctsn.spi1_cs0 */ + P1_26_pru_uart_pin: pinmux_P1_26_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_ctsn.pr1_uart0_cts_n */ + + /* P1_27 (ZCZ ball C8) AIN4 */ + + /* P1_28 (ZCZ ball D17) i2c2_scl */ + P1_28_default_pin: pinmux_P1_28_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */ + P1_28_gpio_pin: pinmux_P1_28_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P1_28_gpio_pu_pin: pinmux_P1_28_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P1_28_gpio_pd_pin: pinmux_P1_28_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P1_28_gpio_input_pin: pinmux_P1_28_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_INPUT | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P1_28_can_pin: pinmux_P1_28_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart1_rtsn.dcan0_rx */ + P1_28_i2c_pin: pinmux_P1_28_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */ + P1_28_spi_cs_pin: pinmux_P1_28_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_rtsn.spi1_cs1 */ + P1_28_pru_uart_pin: pinmux_P1_28_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_rtsn.pr1_uart0_rts_n */ + + /* P1_29 (ZCZ ball A14) pru0_in7 */ + P1_29_default_pin: pinmux_P1_29_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkx.pru0_in7 */ + P1_29_gpio_pin: pinmux_P1_29_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P1_29_gpio_pu_pin: pinmux_P1_29_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P1_29_gpio_pd_pin: pinmux_P1_29_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P1_29_gpio_input_pin: pinmux_P1_29_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P1_29_qep_pin: pinmux_P1_29_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_ahclkx.eqep0_strobe */ + P1_29_pruout_pin: pinmux_P1_29_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_ahclkx.pru0_out7 */ + P1_29_pruin_pin: pinmux_P1_29_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkx.pru0_in7 */ + + /* P1_30 (ZCZ ball E16) uart0_txd */ + P1_30_default_pin: pinmux_P1_30_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart0_txd.uart0_txd */ + P1_30_gpio_pin: pinmux_P1_30_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart0_txd.gpio1_11 */ + P1_30_gpio_pu_pin: pinmux_P1_30_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart0_txd.gpio1_11 */ + P1_30_gpio_pd_pin: pinmux_P1_30_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart0_txd.gpio1_11 */ + P1_30_gpio_input_pin: pinmux_P1_30_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_INPUT | MUX_MODE7) >; }; /* uart0_txd.gpio1_11 */ + P1_30_uart_pin: pinmux_P1_30_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart0_txd.uart0_txd */ + P1_30_spi_cs_pin: pinmux_P1_30_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart0_txd.spi1_cs1 */ + P1_30_can_pin: pinmux_P1_30_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart0_txd.dcan0_rx */ + P1_30_i2c_pin: pinmux_P1_30_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart0_txd.i2c2_scl */ + P1_30_pruout_pin: pinmux_P1_30_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* uart0_txd.pru1_out15 */ + P1_30_pruin_pin: pinmux_P1_30_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_INPUT | MUX_MODE6) >; }; /* uart0_txd.pru1_in15 */ + + /* P1_31 (ZCZ ball B12) pru0_in4 */ + P1_31_default_pin: pinmux_P1_31_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkr.pru0_in4 */ + P1_31_gpio_pin: pinmux_P1_31_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P1_31_gpio_pu_pin: pinmux_P1_31_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P1_31_gpio_pd_pin: pinmux_P1_31_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P1_31_gpio_input_pin: pinmux_P1_31_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P1_31_qep_pin: pinmux_P1_31_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkr.eqep0a_in */ + P1_31_pruout_pin: pinmux_P1_31_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_aclkr.pru0_out4 */ + P1_31_pruin_pin: pinmux_P1_31_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkr.pru0_in4 */ + + /* P1_32 (ZCZ ball E15) uart0_rxd */ + P1_32_default_pin: pinmux_P1_32_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart0_rxd.uart0_rxd */ + P1_32_gpio_pin: pinmux_P1_32_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart0_rxd.gpio1_10 */ + P1_32_gpio_pu_pin: pinmux_P1_32_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart0_rxd.gpio1_10 */ + P1_32_gpio_pd_pin: pinmux_P1_32_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart0_rxd.gpio1_10 */ + P1_32_gpio_input_pin: pinmux_P1_32_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_INPUT | MUX_MODE7) >; }; /* uart0_rxd.gpio1_10 */ + P1_32_uart_pin: pinmux_P1_32_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart0_rxd.uart0_rxd */ + P1_32_spi_cs_pin: pinmux_P1_32_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart0_rxd.spi1_cs0 */ + P1_32_can_pin: pinmux_P1_32_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart0_rxd.dcan0_tx */ + P1_32_i2c_pin: pinmux_P1_32_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart0_rxd.i2c2_sda */ + P1_32_pruout_pin: pinmux_P1_32_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* uart0_rxd.pru1_out14 */ + P1_32_pruin_pin: pinmux_P1_32_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_INPUT | MUX_MODE6) >; }; /* uart0_rxd.pru1_in14 */ + + /* P1_33 (ZCZ ball B13) pru0_in1 */ + P1_33_default_pin: pinmux_P1_33_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsx.pru0_in1 */ + P1_33_gpio_pin: pinmux_P1_33_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P1_33_gpio_pu_pin: pinmux_P1_33_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P1_33_gpio_pd_pin: pinmux_P1_33_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P1_33_gpio_input_pin: pinmux_P1_33_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P1_33_pwm_pin: pinmux_P1_33_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_fsx.ehrpwm0b */ + P1_33_spi_pin: pinmux_P1_33_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_fsx.spi1_d0 */ + P1_33_pruout_pin: pinmux_P1_33_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_fsx.pru0_out1 */ + P1_33_pruin_pin: pinmux_P1_33_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsx.pru0_in1 */ + + /* P1_34 (ZCZ ball T11) gpio0_26 */ + P1_34_default_pin: pinmux_P1_34_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P1_34_gpio_pin: pinmux_P1_34_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P1_34_gpio_pu_pin: pinmux_P1_34_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P1_34_gpio_pd_pin: pinmux_P1_34_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P1_34_gpio_input_pin: pinmux_P1_34_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P1_34_pwm_pin: pinmux_P1_34_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad10.ehrpwm2_tripzone_input */ + + /* P1_35 (ZCZ ball V5) pru1_in10 */ + P1_35_default_pin: pinmux_P1_35_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_pclk.pru1_in10 */ + P1_35_gpio_pin: pinmux_P1_35_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P1_35_gpio_pu_pin: pinmux_P1_35_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P1_35_gpio_pd_pin: pinmux_P1_35_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P1_35_gpio_input_pin: pinmux_P1_35_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P1_35_pruout_pin: pinmux_P1_35_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_pclk.pru1_out10 */ + P1_35_pruin_pin: pinmux_P1_35_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_pclk.pru1_in10 */ + + /* P1_36 (ZCZ ball A13) ehrpwm0a */ + P1_36_default_pin: pinmux_P1_36_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkx.ehrpwm0a */ + P1_36_gpio_pin: pinmux_P1_36_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P1_36_gpio_pu_pin: pinmux_P1_36_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P1_36_gpio_pd_pin: pinmux_P1_36_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P1_36_gpio_input_pin: pinmux_P1_36_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P1_36_pwm_pin: pinmux_P1_36_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkx.ehrpwm0a */ + P1_36_spi_sclk_pin: pinmux_P1_36_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_aclkx.spi1_sclk */ + P1_36_pruout_pin: pinmux_P1_36_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_aclkx.pru0_out0 */ + P1_36_pruin_pin: pinmux_P1_36_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkx.pru0_in0 */ + + + /************************/ + /* P2 Header */ + /************************/ + + /* P2_01 (ZCZ ball U14) ehrpwm1a */ + P2_01_default_pin: pinmux_P2_01_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a2.ehrpwm1a */ + P2_01_gpio_pin: pinmux_P2_01_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P2_01_gpio_pu_pin: pinmux_P2_01_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P2_01_gpio_pd_pin: pinmux_P2_01_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P2_01_gpio_input_pin: pinmux_P2_01_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P2_01_pwm_pin: pinmux_P2_01_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a2.ehrpwm1a */ + + /* P2_02 (ZCZ ball V17) gpio1_27 */ + P2_02_default_pin: pinmux_P2_02_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x086c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a11.gpio1_27 */ + P2_02_gpio_pin: pinmux_P2_02_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x086c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a11.gpio1_27 */ + P2_02_gpio_pu_pin: pinmux_P2_02_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x086c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a11.gpio1_27 */ + P2_02_gpio_pd_pin: pinmux_P2_02_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x086c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a11.gpio1_27 */ + P2_02_gpio_input_pin: pinmux_P2_02_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x086c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a11.gpio1_27 */ + + /* P2_03 (ZCZ ball T10) gpio0_23 */ + P2_03_default_pin: pinmux_P2_03_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P2_03_gpio_pin: pinmux_P2_03_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P2_03_gpio_pu_pin: pinmux_P2_03_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P2_03_gpio_pd_pin: pinmux_P2_03_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P2_03_gpio_input_pin: pinmux_P2_03_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P2_03_pwm_pin: pinmux_P2_03_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad9.ehrpwm2b */ + + /* P2_04 (ZCZ ball T16) gpio1_26 */ + P2_04_default_pin: pinmux_P2_04_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0868, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a10.gpio1_26 */ + P2_04_gpio_pin: pinmux_P2_04_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0868, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a10.gpio1_26 */ + P2_04_gpio_pu_pin: pinmux_P2_04_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0868, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a10.gpio1_26 */ + P2_04_gpio_pd_pin: pinmux_P2_04_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0868, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a10.gpio1_26 */ + P2_04_gpio_input_pin: pinmux_P2_04_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0868, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a10.gpio1_26 */ + + /* P2_05 (ZCZ ball T17) uart4_rxd */ + P2_05_default_pin: pinmux_P2_05_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wait0.uart4_rxd */ + P2_05_gpio_pin: pinmux_P2_05_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P2_05_gpio_pu_pin: pinmux_P2_05_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P2_05_gpio_pd_pin: pinmux_P2_05_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P2_05_gpio_input_pin: pinmux_P2_05_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P2_05_uart_pin: pinmux_P2_05_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wait0.uart4_rxd */ + + /* P2_06 (ZCZ ball U16) gpio1_25 */ + P2_06_default_pin: pinmux_P2_06_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0864, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a9.gpio1_25 */ + P2_06_gpio_pin: pinmux_P2_06_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0864, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a9.gpio1_25 */ + P2_06_gpio_pu_pin: pinmux_P2_06_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0864, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a9.gpio1_25 */ + P2_06_gpio_pd_pin: pinmux_P2_06_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0864, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a9.gpio1_25 */ + P2_06_gpio_input_pin: pinmux_P2_06_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0864, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a9.gpio1_25 */ + + /* P2_07 (ZCZ ball U17) uart4_txd */ + P2_07_default_pin: pinmux_P2_07_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wpn.uart4_txd */ + P2_07_gpio_pin: pinmux_P2_07_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P2_07_gpio_pu_pin: pinmux_P2_07_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P2_07_gpio_pd_pin: pinmux_P2_07_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P2_07_gpio_input_pin: pinmux_P2_07_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P2_07_uart_pin: pinmux_P2_07_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wpn.uart4_txd */ + + /* P2_08 (ZCZ ball U18) gpio1_28 */ + P2_08_default_pin: pinmux_P2_08_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P2_08_gpio_pin: pinmux_P2_08_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P2_08_gpio_pu_pin: pinmux_P2_08_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P2_08_gpio_pd_pin: pinmux_P2_08_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P2_08_gpio_input_pin: pinmux_P2_08_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + + /* P2_09 (ZCZ ball D15) i2c1_scl */ + P2_09_default_pin: pinmux_P2_09_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_txd.i2c1_scl */ + P2_09_gpio_pin: pinmux_P2_09_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P2_09_gpio_pu_pin: pinmux_P2_09_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P2_09_gpio_pd_pin: pinmux_P2_09_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P2_09_gpio_input_pin: pinmux_P2_09_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P2_09_uart_pin: pinmux_P2_09_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart1_txd.uart1_txd */ + P2_09_can_pin: pinmux_P2_09_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart1_txd.dcan1_rx */ + P2_09_i2c_pin: pinmux_P2_09_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_txd.i2c1_scl */ + P2_09_pru_uart_pin: pinmux_P2_09_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_txd.pr1_uart0_txd */ + P2_09_pruin_pin: pinmux_P2_09_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE6) >; }; /* uart1_txd.pru0_in16 */ + + /* P2_10 (ZCZ ball R14) gpio1_20 */ + P2_10_default_pin: pinmux_P2_10_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0850, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a4.gpio1_20 */ + P2_10_gpio_pin: pinmux_P2_10_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0850, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a4.gpio1_20 */ + P2_10_gpio_pu_pin: pinmux_P2_10_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0850, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a4.gpio1_20 */ + P2_10_gpio_pd_pin: pinmux_P2_10_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0850, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a4.gpio1_20 */ + P2_10_gpio_input_pin: pinmux_P2_10_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0850, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a4.gpio1_20 */ + P2_10_qep_pin: pinmux_P2_10_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0850, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a4.eqep1a_in */ + + /* P2_11 (ZCZ ball D16) i2c1_sda */ + P2_11_default_pin: pinmux_P2_11_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rxd.i2c1_sda */ + P2_11_gpio_pin: pinmux_P2_11_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P2_11_gpio_pu_pin: pinmux_P2_11_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P2_11_gpio_pd_pin: pinmux_P2_11_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P2_11_gpio_input_pin: pinmux_P2_11_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P2_11_uart_pin: pinmux_P2_11_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart1_rxd.uart1_rxd */ + P2_11_can_pin: pinmux_P2_11_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart1_rxd.dcan1_tx */ + P2_11_i2c_pin: pinmux_P2_11_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rxd.i2c1_sda */ + P2_11_pru_uart_pin: pinmux_P2_11_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_rxd.pr1_uart0_rxd */ + P2_11_pruin_pin: pinmux_P2_11_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE6) >; }; /* uart1_rxd.pru1_in16 */ + + /* P2_12 POWER_BUTTON */ + + /* P2_13 VOUT-5V */ + + /* P2_14 BAT-VIN */ + + /* P2_15 GND */ + + /* P2_16 BAT-TEMP */ + + /* P2_17 (ZCZ ball V12) gpio2_1 */ + P2_17_default_pin: pinmux_P2_17_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P2_17_gpio_pin: pinmux_P2_17_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P2_17_gpio_pu_pin: pinmux_P2_17_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P2_17_gpio_pd_pin: pinmux_P2_17_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P2_17_gpio_input_pin: pinmux_P2_17_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + + /* P2_18 (ZCZ ball U13) gpio1_15 */ + P2_18_default_pin: pinmux_P2_18_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P2_18_gpio_pin: pinmux_P2_18_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P2_18_gpio_pu_pin: pinmux_P2_18_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P2_18_gpio_pd_pin: pinmux_P2_18_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P2_18_gpio_input_pin: pinmux_P2_18_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P2_18_qep_pin: pinmux_P2_18_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad15.eqep2_strobe */ + P2_18_pru_ecap_pin: pinmux_P2_18_pru_ecap_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_ad15.pr1_ecap0_ecap_capin_apwm_o */ + P2_18_pruin_pin: pinmux_P2_18_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_ad15.pru0_in15 */ + + /* P2_19 (ZCZ ball U12) gpio0_27 */ + P2_19_default_pin: pinmux_P2_19_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P2_19_gpio_pin: pinmux_P2_19_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P2_19_gpio_pu_pin: pinmux_P2_19_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P2_19_gpio_pd_pin: pinmux_P2_19_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P2_19_gpio_input_pin: pinmux_P2_19_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P2_19_pwm_pin: pinmux_P2_19_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad11.ehrpwm0_synco */ + + /* P2_20 (ZCZ ball T13) gpio2_0 */ + P2_20_default_pin: pinmux_P2_20_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0888, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn3.gpio2_0 */ + P2_20_gpio_pin: pinmux_P2_20_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0888, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn3.gpio2_0 */ + P2_20_gpio_pu_pin: pinmux_P2_20_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0888, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn3.gpio2_0 */ + P2_20_gpio_pd_pin: pinmux_P2_20_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0888, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn3.gpio2_0 */ + P2_20_gpio_input_pin: pinmux_P2_20_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0888, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_csn3.gpio2_0 */ + + /* P2_21 GND */ + + /* P2_22 (ZCZ ball V13) gpio1_14 */ + P2_22_default_pin: pinmux_P2_22_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P2_22_gpio_pin: pinmux_P2_22_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P2_22_gpio_pu_pin: pinmux_P2_22_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P2_22_gpio_pd_pin: pinmux_P2_22_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P2_22_gpio_input_pin: pinmux_P2_22_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P2_22_qep_pin: pinmux_P2_22_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad14.eqep2_index */ + P2_22_pruin_pin: pinmux_P2_22_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_ad14.pru0_in14 */ + + /* P2_23 VOUT-3.3V */ + + /* P2_24 (ZCZ ball T12) gpio1_12 */ + P2_24_default_pin: pinmux_P2_24_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P2_24_gpio_pin: pinmux_P2_24_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P2_24_gpio_pu_pin: pinmux_P2_24_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P2_24_gpio_pd_pin: pinmux_P2_24_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P2_24_gpio_input_pin: pinmux_P2_24_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P2_24_qep_pin: pinmux_P2_24_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad12.eqep2a_in */ + P2_24_pruout_pin: pinmux_P2_24_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_ad12.pru0_out14 */ + + /* P2_25 (ZCZ ball E17) spi1_d1 */ + P2_25_default_pin: pinmux_P2_25_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart0_rtsn.spi1_d1 */ + P2_25_gpio_pin: pinmux_P2_25_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart0_rtsn.gpio1_9 */ + P2_25_gpio_pu_pin: pinmux_P2_25_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart0_rtsn.gpio1_9 */ + P2_25_gpio_pd_pin: pinmux_P2_25_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart0_rtsn.gpio1_9 */ + P2_25_gpio_input_pin: pinmux_P2_25_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_INPUT | MUX_MODE7) >; }; /* uart0_rtsn.gpio1_9 */ + P2_25_uart_pin: pinmux_P2_25_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart0_rtsn.uart4_txd */ + P2_25_can_pin: pinmux_P2_25_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart0_rtsn.dcan1_rx */ + P2_25_i2c_pin: pinmux_P2_25_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart0_rtsn.i2c1_scl */ + P2_25_spi_pin: pinmux_P2_25_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart0_rtsn.spi1_d1 */ + P2_25_spi_cs_pin: pinmux_P2_25_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart0_rtsn.spi1_cs0 */ + + /* P2_26 RESET# */ + + /* P2_27 (ZCZ ball E18) spi1_d0 */ + P2_27_default_pin: pinmux_P2_27_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart0_ctsn.spi1_d0 */ + P2_27_gpio_pin: pinmux_P2_27_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart0_ctsn.gpio1_8 */ + P2_27_gpio_pu_pin: pinmux_P2_27_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart0_ctsn.gpio1_8 */ + P2_27_gpio_pd_pin: pinmux_P2_27_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart0_ctsn.gpio1_8 */ + P2_27_gpio_input_pin: pinmux_P2_27_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_INPUT | MUX_MODE7) >; }; /* uart0_ctsn.gpio1_8 */ + P2_27_uart_pin: pinmux_P2_27_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart0_ctsn.uart4_rxd */ + P2_27_can_pin: pinmux_P2_27_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart0_ctsn.dcan1_tx */ + P2_27_i2c_pin: pinmux_P2_27_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart0_ctsn.i2c1_sda */ + P2_27_spi_pin: pinmux_P2_27_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart0_ctsn.spi1_d0 */ + + /* P2_28 (ZCZ ball D13) pru0_in6 */ + P2_28_default_pin: pinmux_P2_28_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr1.pru0_in6 */ + P2_28_gpio_pin: pinmux_P2_28_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P2_28_gpio_pu_pin: pinmux_P2_28_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P2_28_gpio_pd_pin: pinmux_P2_28_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P2_28_gpio_input_pin: pinmux_P2_28_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P2_28_qep_pin: pinmux_P2_28_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_axr1.eqep0_index */ + P2_28_pruout_pin: pinmux_P2_28_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_axr1.pru0_out6 */ + P2_28_pruin_pin: pinmux_P2_28_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr1.pru0_in6 */ + + /* P2_29 (ZCZ ball C18) spi1_sclk */ + P2_29_default_pin: pinmux_P2_29_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* eCAP0_in_PWM0_out.spi1_sclk */ + P2_29_gpio_pin: pinmux_P2_29_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P2_29_gpio_pu_pin: pinmux_P2_29_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P2_29_gpio_pd_pin: pinmux_P2_29_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P2_29_gpio_input_pin: pinmux_P2_29_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_INPUT | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P2_29_pwm_pin: pinmux_P2_29_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE0) >; }; /* eCAP0_in_PWM0_out.ecap0_in_pwm0_out */ + P2_29_uart_pin: pinmux_P2_29_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* eCAP0_in_PWM0_out.uart3_txd */ + P2_29_spi_cs_pin: pinmux_P2_29_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* eCAP0_in_PWM0_out.spi1_cs1 */ + P2_29_pru_ecap_pin: pinmux_P2_29_pru_ecap_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* eCAP0_in_PWM0_out.pr1_ecap0_ecap_capin_apwm_o */ + P2_29_spi_sclk_pin: pinmux_P2_29_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* eCAP0_in_PWM0_out.spi1_sclk */ + + /* P2_30 (ZCZ ball C12) pru0_in3 */ + P2_30_default_pin: pinmux_P2_30_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkr.pru0_in3 */ + P2_30_gpio_pin: pinmux_P2_30_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P2_30_gpio_pu_pin: pinmux_P2_30_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P2_30_gpio_pd_pin: pinmux_P2_30_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P2_30_gpio_input_pin: pinmux_P2_30_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P2_30_pwm_pin: pinmux_P2_30_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_ahclkr.ehrpwm0_synci */ + P2_30_spi_cs_pin: pinmux_P2_30_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_ahclkr.spi1_cs0 */ + P2_30_pruout_pin: pinmux_P2_30_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_ahclkr.pru0_out3 */ + P2_30_pruin_pin: pinmux_P2_30_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkr.pru0_in3 */ + + /* P2_31 (ZCZ ball A15) spi1_cs1 */ + P2_31_default_pin: pinmux_P2_31_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* xdma_event_intr0.spi1_cs1 */ + P2_31_gpio_pin: pinmux_P2_31_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr0.gpio0_19 */ + P2_31_gpio_pu_pin: pinmux_P2_31_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr0.gpio0_19 */ + P2_31_gpio_pd_pin: pinmux_P2_31_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr0.gpio0_19 */ + P2_31_gpio_input_pin: pinmux_P2_31_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_INPUT | MUX_MODE7) >; }; /* xdma_event_intr0.gpio0_19 */ + P2_31_spi_cs_pin: pinmux_P2_31_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* xdma_event_intr0.spi1_cs1 */ + P2_31_pruin_pin: pinmux_P2_31_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_INPUT | MUX_MODE5) >; }; /* xdma_event_intr0.pru1_in16 */ + + /* P2_32 (ZCZ ball D12) pru0_in2 */ + P2_32_default_pin: pinmux_P2_32_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr0.pru0_in2 */ + P2_32_gpio_pin: pinmux_P2_32_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P2_32_gpio_pu_pin: pinmux_P2_32_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P2_32_gpio_pd_pin: pinmux_P2_32_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P2_32_gpio_input_pin: pinmux_P2_32_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P2_32_pwm_pin: pinmux_P2_32_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_axr0.ehrpwm0_tripzone_input */ + P2_32_spi_pin: pinmux_P2_32_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_axr0.spi1_d1 */ + P2_32_pruout_pin: pinmux_P2_32_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_axr0.pru0_out2 */ + P2_32_pruin_pin: pinmux_P2_32_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr0.pru0_in2 */ + + /* P2_33 (ZCZ ball R12) gpio1_13 */ + P2_33_default_pin: pinmux_P2_33_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P2_33_gpio_pin: pinmux_P2_33_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P2_33_gpio_pu_pin: pinmux_P2_33_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P2_33_gpio_pd_pin: pinmux_P2_33_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P2_33_gpio_input_pin: pinmux_P2_33_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P2_33_qep_pin: pinmux_P2_33_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad13.eqep2b_in */ + P2_33_pruout_pin: pinmux_P2_33_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_ad13.pru0_out15 */ + + /* P2_34 (ZCZ ball C13) pru0_in5 */ + P2_34_default_pin: pinmux_P2_34_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsr.pru0_in5 */ + P2_34_gpio_pin: pinmux_P2_34_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P2_34_gpio_pu_pin: pinmux_P2_34_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P2_34_gpio_pd_pin: pinmux_P2_34_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P2_34_gpio_input_pin: pinmux_P2_34_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P2_34_qep_pin: pinmux_P2_34_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_fsr.eqep0b_in */ + P2_34_pruout_pin: pinmux_P2_34_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_fsr.pru0_out5 */ + P2_34_pruin_pin: pinmux_P2_34_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsr.pru0_in5 */ + + /* P2_35 (ZCZ ball U5) gpio2_22 */ + P2_35_default_pin: pinmux_P2_35_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P2_35_gpio_pin: pinmux_P2_35_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P2_35_gpio_pu_pin: pinmux_P2_35_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P2_35_gpio_pd_pin: pinmux_P2_35_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P2_35_gpio_input_pin: pinmux_P2_35_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P2_35_pruout_pin: pinmux_P2_35_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_vsync.pru1_out8 */ + P2_35_pruin_pin: pinmux_P2_35_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_vsync.pru1_in8 */ + + /* P2_36 (ZCZ ball C9) AIN7 */ }; &epwmss0 { @@ -141,7 +967,8 @@ &ehrpwm0 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&ehrpwm0_pins>; + //pinctrl-0 = <&ehrpwm0_pins>; + pinctrl-0 = <>; }; &epwmss1 { @@ -151,7 +978,18 @@ &ehrpwm1 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&ehrpwm1_pins>; + //pinctrl-0 = <&ehrpwm1_pins>; + pinctrl-0 = <>; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; &i2c0 { @@ -161,9 +999,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <>; + + status = "okay"; + clock-frequency = <400000>; +}; + &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; +// pinctrl-0 = <&i2c2_pins>; + pinctrl-0 = <>; status = "okay"; clock-frequency = <400000>; @@ -194,14 +1041,30 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; + //pinctrl-0 = <&uart0_pins>; + pinctrl-0 = <>; + + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <>; status = "okay"; }; &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins>; + //pinctrl-0 = <&uart4_pins>; + pinctrl-0 = <>; status = "okay"; }; @@ -235,3 +1098,1088 @@ &cppi41dma { status = "okay"; }; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <24000000>; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <24000000>; + status = "disabled"; + }; +}; + +&spi1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <24000000>; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <24000000>; + }; +}; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&dcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ocp { + /************************/ + /* P1 Header */ + /************************/ + + /* P1_01 VIN-AC */ + + /* P1_02 (ZCZ ball R5) gpio_input */ + P1_02_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P1_02_default_pin>; + pinctrl-1 = <&P1_02_gpio_pin>; + pinctrl-2 = <&P1_02_gpio_pu_pin>; + pinctrl-3 = <&P1_02_gpio_pd_pin>; + pinctrl-4 = <&P1_02_gpio_input_pin>; + pinctrl-5 = <&P1_02_pruout_pin>; + pinctrl-6 = <&P1_02_pruin_pin>; + }; + + /* P1_03 (ZCZ ball F15) usb1_vbus_out */ + + /* P1_04 (ZCZ ball R6) */ + P1_04_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P1_04_default_pin>; + pinctrl-1 = <&P1_04_gpio_pin>; + pinctrl-2 = <&P1_04_gpio_pu_pin>; + pinctrl-3 = <&P1_04_gpio_pd_pin>; + pinctrl-4 = <&P1_04_gpio_input_pin>; + pinctrl-5 = <&P1_04_pruout_pin>; + pinctrl-6 = <&P1_04_pruin_pin>; + }; + + /* P1_05 (ZCZ ball T18) usb1_vbus_in */ + + /* P1_06 (ZCZ ball A16) spi_cs */ + P1_06_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P1_06_default_pin>; + pinctrl-1 = <&P1_06_gpio_pin>; + pinctrl-2 = <&P1_06_gpio_pu_pin>; + pinctrl-3 = <&P1_06_gpio_pd_pin>; + pinctrl-4 = <&P1_06_gpio_input_pin>; + pinctrl-5 = <&P1_06_spi_cs_pin>; + pinctrl-6 = <&P1_06_i2c_pin>; + pinctrl-7 = <&P1_06_pwm_pin>; + pinctrl-8 = <&P1_06_pru_uart_pin>; + }; + + /* P1_07 VIN-USB */ + + /* P1_08 (ZCZ ball A17) spi_sclk */ + P1_08_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "uart", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P1_08_default_pin>; + pinctrl-1 = <&P1_08_gpio_pin>; + pinctrl-2 = <&P1_08_gpio_pu_pin>; + pinctrl-3 = <&P1_08_gpio_pd_pin>; + pinctrl-4 = <&P1_08_gpio_input_pin>; + pinctrl-5 = <&P1_08_spi_sclk_pin>; + pinctrl-6 = <&P1_08_uart_pin>; + pinctrl-7 = <&P1_08_i2c_pin>; + pinctrl-8 = <&P1_08_pwm_pin>; + pinctrl-9 = <&P1_08_pru_uart_pin>; + }; + + /* P1_09 (ZCZ ball R18) USB1-DN */ + + /* P1_10 (ZCZ ball B17) spi */ + P1_10_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "uart", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P1_10_default_pin>; + pinctrl-1 = <&P1_10_gpio_pin>; + pinctrl-2 = <&P1_10_gpio_pu_pin>; + pinctrl-3 = <&P1_10_gpio_pd_pin>; + pinctrl-4 = <&P1_10_gpio_input_pin>; + pinctrl-5 = <&P1_10_spi_pin>; + pinctrl-6 = <&P1_10_uart_pin>; + pinctrl-7 = <&P1_10_i2c_pin>; + pinctrl-8 = <&P1_10_pwm_pin>; + pinctrl-9 = <&P1_10_pru_uart_pin>; + }; + + /* P1_11 (ZCZ ball R17) USB1-DP */ + + /* P1_12 (ZCZ ball B16) spi */ + P1_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P1_12_default_pin>; + pinctrl-1 = <&P1_12_gpio_pin>; + pinctrl-2 = <&P1_12_gpio_pu_pin>; + pinctrl-3 = <&P1_12_gpio_pd_pin>; + pinctrl-4 = <&P1_12_gpio_input_pin>; + pinctrl-5 = <&P1_12_spi_pin>; + pinctrl-6 = <&P1_12_i2c_pin>; + pinctrl-7 = <&P1_12_pwm_pin>; + pinctrl-8 = <&P1_12_pru_uart_pin>; + }; + + /* P1_13 (ZCZ ball P17) USB1-ID */ + + /* P1_14 VOUT-3.3V */ + + /* P1_15 GND */ + + /* P1_16 GND */ + + /* P1_17 (ZCZ ball A9) VREFN */ + + /* P1_18 (ZCZ ball B9) VREFP */ + + /* P1_19 (ZCZ ball B6) AIN0 */ + + /* P1_20 (ZCZ ball D14) */ + P1_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruin"; + pinctrl-0 = <&P1_20_default_pin>; + pinctrl-1 = <&P1_20_gpio_pin>; + pinctrl-2 = <&P1_20_gpio_pu_pin>; + pinctrl-3 = <&P1_20_gpio_pd_pin>; + pinctrl-4 = <&P1_20_gpio_input_pin>; + pinctrl-5 = <&P1_20_pruin_pin>; + }; + + /* P1_21 (ZCZ ball C7) AIN1 */ + + /* P1_22 GND */ + + /* P1_23 (ZCZ ball B7) AIN2 */ + + /* P1_24 VOUT-5V */ + + /* P1_25 (ZCZ ball A7) AIN3 */ + + /* P1_26 (ZCZ ball D18) i2c */ + P1_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart"; + pinctrl-0 = <&P1_26_default_pin>; + pinctrl-1 = <&P1_26_gpio_pin>; + pinctrl-2 = <&P1_26_gpio_pu_pin>; + pinctrl-3 = <&P1_26_gpio_pd_pin>; + pinctrl-4 = <&P1_26_gpio_input_pin>; + pinctrl-5 = <&P1_26_spi_cs_pin>; + pinctrl-6 = <&P1_26_can_pin>; + pinctrl-7 = <&P1_26_i2c_pin>; + pinctrl-8 = <&P1_26_pru_uart_pin>; + }; + + /* P1_27 (ZCZ ball C8) AIN4 */ + + /* P1_28 (ZCZ ball D17) i2c */ + P1_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart"; + pinctrl-0 = <&P1_28_default_pin>; + pinctrl-1 = <&P1_28_gpio_pin>; + pinctrl-2 = <&P1_28_gpio_pu_pin>; + pinctrl-3 = <&P1_28_gpio_pd_pin>; + pinctrl-4 = <&P1_28_gpio_input_pin>; + pinctrl-5 = <&P1_28_spi_cs_pin>; + pinctrl-6 = <&P1_28_can_pin>; + pinctrl-7 = <&P1_28_i2c_pin>; + pinctrl-8 = <&P1_28_pru_uart_pin>; + }; + + /* P1_29 (ZCZ ball A14) pruin */ + P1_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P1_29_default_pin>; + pinctrl-1 = <&P1_29_gpio_pin>; + pinctrl-2 = <&P1_29_gpio_pu_pin>; + pinctrl-3 = <&P1_29_gpio_pd_pin>; + pinctrl-4 = <&P1_29_gpio_input_pin>; + pinctrl-5 = <&P1_29_qep_pin>; + pinctrl-6 = <&P1_29_pruout_pin>; + pinctrl-7 = <&P1_29_pruin_pin>; + }; + + /* P1_30 (ZCZ ball E16) uart */ + P1_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "uart", "can", "i2c", "pruout", "pruin"; + pinctrl-0 = <&P1_30_default_pin>; + pinctrl-1 = <&P1_30_gpio_pin>; + pinctrl-2 = <&P1_30_gpio_pu_pin>; + pinctrl-3 = <&P1_30_gpio_pd_pin>; + pinctrl-4 = <&P1_30_gpio_input_pin>; + pinctrl-5 = <&P1_30_spi_cs_pin>; + pinctrl-6 = <&P1_30_uart_pin>; + pinctrl-7 = <&P1_30_can_pin>; + pinctrl-8 = <&P1_30_i2c_pin>; + pinctrl-9 = <&P1_30_pruout_pin>; + pinctrl-10 = <&P1_30_pruin_pin>; + }; + + /* P1_31 (ZCZ ball B12) pruin */ + P1_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P1_31_default_pin>; + pinctrl-1 = <&P1_31_gpio_pin>; + pinctrl-2 = <&P1_31_gpio_pu_pin>; + pinctrl-3 = <&P1_31_gpio_pd_pin>; + pinctrl-4 = <&P1_31_gpio_input_pin>; + pinctrl-5 = <&P1_31_qep_pin>; + pinctrl-6 = <&P1_31_pruout_pin>; + pinctrl-7 = <&P1_31_pruin_pin>; + }; + + /* P1_32 (ZCZ ball E15) uart */ + P1_32_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "uart", "can", "i2c", "pruout", "pruin"; + pinctrl-0 = <&P1_32_default_pin>; + pinctrl-1 = <&P1_32_gpio_pin>; + pinctrl-2 = <&P1_32_gpio_pu_pin>; + pinctrl-3 = <&P1_32_gpio_pd_pin>; + pinctrl-4 = <&P1_32_gpio_input_pin>; + pinctrl-5 = <&P1_32_spi_cs_pin>; + pinctrl-6 = <&P1_32_uart_pin>; + pinctrl-7 = <&P1_32_can_pin>; + pinctrl-8 = <&P1_32_i2c_pin>; + pinctrl-9 = <&P1_32_pruout_pin>; + pinctrl-10 = <&P1_32_pruin_pin>; + }; + + /* P1_33 (ZCZ ball B13) pruin */ + P1_33_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P1_33_default_pin>; + pinctrl-1 = <&P1_33_gpio_pin>; + pinctrl-2 = <&P1_33_gpio_pu_pin>; + pinctrl-3 = <&P1_33_gpio_pd_pin>; + pinctrl-4 = <&P1_33_gpio_input_pin>; + pinctrl-5 = <&P1_33_spi_pin>; + pinctrl-6 = <&P1_33_pwm_pin>; + pinctrl-7 = <&P1_33_pruout_pin>; + pinctrl-8 = <&P1_33_pruin_pin>; + }; + + /* P1_34 (ZCZ ball T11) */ + P1_34_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P1_34_default_pin>; + pinctrl-1 = <&P1_34_gpio_pin>; + pinctrl-2 = <&P1_34_gpio_pu_pin>; + pinctrl-3 = <&P1_34_gpio_pd_pin>; + pinctrl-4 = <&P1_34_gpio_input_pin>; + pinctrl-5 = <&P1_34_pwm_pin>; + }; + + /* P1_35 (ZCZ ball V5) pruin */ + P1_35_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P1_35_default_pin>; + pinctrl-1 = <&P1_35_gpio_pin>; + pinctrl-2 = <&P1_35_gpio_pu_pin>; + pinctrl-3 = <&P1_35_gpio_pd_pin>; + pinctrl-4 = <&P1_35_gpio_input_pin>; + pinctrl-5 = <&P1_35_pruout_pin>; + pinctrl-6 = <&P1_35_pruin_pin>; + }; + + /* P1_36 (ZCZ ball A13) pwm */ + P1_36_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P1_36_default_pin>; + pinctrl-1 = <&P1_36_gpio_pin>; + pinctrl-2 = <&P1_36_gpio_pu_pin>; + pinctrl-3 = <&P1_36_gpio_pd_pin>; + pinctrl-4 = <&P1_36_gpio_input_pin>; + pinctrl-5 = <&P1_36_spi_sclk_pin>; + pinctrl-6 = <&P1_36_pwm_pin>; + pinctrl-7 = <&P1_36_pruout_pin>; + pinctrl-8 = <&P1_36_pruin_pin>; + }; + + + /************************/ + /* P2 Header */ + /************************/ + + /* P2_01 (ZCZ ball U14) pwm */ + P2_01_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P2_01_default_pin>; + pinctrl-1 = <&P2_01_gpio_pin>; + pinctrl-2 = <&P2_01_gpio_pu_pin>; + pinctrl-3 = <&P2_01_gpio_pd_pin>; + pinctrl-4 = <&P2_01_gpio_input_pin>; + pinctrl-5 = <&P2_01_pwm_pin>; + }; + + /* P2_02 (ZCZ ball V17) */ + P2_02_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P2_02_default_pin>; + pinctrl-1 = <&P2_02_gpio_pin>; + pinctrl-2 = <&P2_02_gpio_pu_pin>; + pinctrl-3 = <&P2_02_gpio_pd_pin>; + pinctrl-4 = <&P2_02_gpio_input_pin>; + }; + + /* P2_03 (ZCZ ball T10) */ + P2_03_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P2_03_default_pin>; + pinctrl-1 = <&P2_03_gpio_pin>; + pinctrl-2 = <&P2_03_gpio_pu_pin>; + pinctrl-3 = <&P2_03_gpio_pd_pin>; + pinctrl-4 = <&P2_03_gpio_input_pin>; + pinctrl-5 = <&P2_03_pwm_pin>; + }; + + /* P2_04 (ZCZ ball T16) */ + P2_04_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P2_04_default_pin>; + pinctrl-1 = <&P2_04_gpio_pin>; + pinctrl-2 = <&P2_04_gpio_pu_pin>; + pinctrl-3 = <&P2_04_gpio_pd_pin>; + pinctrl-4 = <&P2_04_gpio_input_pin>; + }; + + /* P2_05 (ZCZ ball T17) uart */ + P2_05_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart"; + pinctrl-0 = <&P2_05_default_pin>; + pinctrl-1 = <&P2_05_gpio_pin>; + pinctrl-2 = <&P2_05_gpio_pu_pin>; + pinctrl-3 = <&P2_05_gpio_pd_pin>; + pinctrl-4 = <&P2_05_gpio_input_pin>; + pinctrl-5 = <&P2_05_uart_pin>; + }; + + /* P2_06 (ZCZ ball U16) */ + P2_06_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P2_06_default_pin>; + pinctrl-1 = <&P2_06_gpio_pin>; + pinctrl-2 = <&P2_06_gpio_pu_pin>; + pinctrl-3 = <&P2_06_gpio_pd_pin>; + pinctrl-4 = <&P2_06_gpio_input_pin>; + }; + + /* P2_07 (ZCZ ball U17) uart */ + P2_07_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart"; + pinctrl-0 = <&P2_07_default_pin>; + pinctrl-1 = <&P2_07_gpio_pin>; + pinctrl-2 = <&P2_07_gpio_pu_pin>; + pinctrl-3 = <&P2_07_gpio_pd_pin>; + pinctrl-4 = <&P2_07_gpio_input_pin>; + pinctrl-5 = <&P2_07_uart_pin>; + }; + + /* P2_08 (ZCZ ball U18) */ + P2_08_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P2_08_default_pin>; + pinctrl-1 = <&P2_08_gpio_pin>; + pinctrl-2 = <&P2_08_gpio_pu_pin>; + pinctrl-3 = <&P2_08_gpio_pd_pin>; + pinctrl-4 = <&P2_08_gpio_input_pin>; + }; + + /* P2_09 (ZCZ ball D15) i2c */ + P2_09_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin"; + pinctrl-0 = <&P2_09_default_pin>; + pinctrl-1 = <&P2_09_gpio_pin>; + pinctrl-2 = <&P2_09_gpio_pu_pin>; + pinctrl-3 = <&P2_09_gpio_pd_pin>; + pinctrl-4 = <&P2_09_gpio_input_pin>; + pinctrl-5 = <&P2_09_uart_pin>; + pinctrl-6 = <&P2_09_can_pin>; + pinctrl-7 = <&P2_09_i2c_pin>; + pinctrl-8 = <&P2_09_pru_uart_pin>; + pinctrl-9 = <&P2_09_pruin_pin>; + }; + + /* P2_10 (ZCZ ball R14) */ + P2_10_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P2_10_default_pin>; + pinctrl-1 = <&P2_10_gpio_pin>; + pinctrl-2 = <&P2_10_gpio_pu_pin>; + pinctrl-3 = <&P2_10_gpio_pd_pin>; + pinctrl-4 = <&P2_10_gpio_input_pin>; + pinctrl-5 = <&P2_10_qep_pin>; + }; + + /* P2_11 (ZCZ ball D16) i2c */ + P2_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin"; + pinctrl-0 = <&P2_11_default_pin>; + pinctrl-1 = <&P2_11_gpio_pin>; + pinctrl-2 = <&P2_11_gpio_pu_pin>; + pinctrl-3 = <&P2_11_gpio_pd_pin>; + pinctrl-4 = <&P2_11_gpio_input_pin>; + pinctrl-5 = <&P2_11_uart_pin>; + pinctrl-6 = <&P2_11_can_pin>; + pinctrl-7 = <&P2_11_i2c_pin>; + pinctrl-8 = <&P2_11_pru_uart_pin>; + pinctrl-9 = <&P2_11_pruin_pin>; + }; + + /* P2_12 POWER_BUTTON */ + + /* P2_13 VOUT-5V */ + + /* P2_14 BAT-VIN */ + + /* P2_15 GND */ + + /* P2_16 BAT-TEMP */ + + /* P2_17 (ZCZ ball V12) */ + P2_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P2_17_default_pin>; + pinctrl-1 = <&P2_17_gpio_pin>; + pinctrl-2 = <&P2_17_gpio_pu_pin>; + pinctrl-3 = <&P2_17_gpio_pd_pin>; + pinctrl-4 = <&P2_17_gpio_input_pin>; + }; + + /* P2_18 (ZCZ ball U13) */ + P2_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pru_ecap", "pruin"; + pinctrl-0 = <&P2_18_default_pin>; + pinctrl-1 = <&P2_18_gpio_pin>; + pinctrl-2 = <&P2_18_gpio_pu_pin>; + pinctrl-3 = <&P2_18_gpio_pd_pin>; + pinctrl-4 = <&P2_18_gpio_input_pin>; + pinctrl-5 = <&P2_18_qep_pin>; + pinctrl-6 = <&P2_18_pru_ecap_pin>; + pinctrl-7 = <&P2_18_pruin_pin>; + }; + + /* P2_19 (ZCZ ball U12) */ + P2_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P2_19_default_pin>; + pinctrl-1 = <&P2_19_gpio_pin>; + pinctrl-2 = <&P2_19_gpio_pu_pin>; + pinctrl-3 = <&P2_19_gpio_pd_pin>; + pinctrl-4 = <&P2_19_gpio_input_pin>; + pinctrl-5 = <&P2_19_pwm_pin>; + }; + + /* P2_20 (ZCZ ball T13) */ + P2_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P2_20_default_pin>; + pinctrl-1 = <&P2_20_gpio_pin>; + pinctrl-2 = <&P2_20_gpio_pu_pin>; + pinctrl-3 = <&P2_20_gpio_pd_pin>; + pinctrl-4 = <&P2_20_gpio_input_pin>; + }; + + /* P2_21 GND */ + + /* P2_22 (ZCZ ball V13) */ + P2_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruin"; + pinctrl-0 = <&P2_22_default_pin>; + pinctrl-1 = <&P2_22_gpio_pin>; + pinctrl-2 = <&P2_22_gpio_pu_pin>; + pinctrl-3 = <&P2_22_gpio_pd_pin>; + pinctrl-4 = <&P2_22_gpio_input_pin>; + pinctrl-5 = <&P2_22_qep_pin>; + pinctrl-6 = <&P2_22_pruin_pin>; + }; + + /* P2_23 VOUT-3.3V */ + + /* P2_24 (ZCZ ball T12) */ + P2_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout"; + pinctrl-0 = <&P2_24_default_pin>; + pinctrl-1 = <&P2_24_gpio_pin>; + pinctrl-2 = <&P2_24_gpio_pu_pin>; + pinctrl-3 = <&P2_24_gpio_pd_pin>; + pinctrl-4 = <&P2_24_gpio_input_pin>; + pinctrl-5 = <&P2_24_qep_pin>; + pinctrl-6 = <&P2_24_pruout_pin>; + }; + + /* P2_25 (ZCZ ball E17) spi */ + P2_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "spi_cs", "uart", "can", "i2c"; + pinctrl-0 = <&P2_25_default_pin>; + pinctrl-1 = <&P2_25_gpio_pin>; + pinctrl-2 = <&P2_25_gpio_pu_pin>; + pinctrl-3 = <&P2_25_gpio_pd_pin>; + pinctrl-4 = <&P2_25_gpio_input_pin>; + pinctrl-5 = <&P2_25_spi_pin>; + pinctrl-6 = <&P2_25_spi_cs_pin>; + pinctrl-7 = <&P2_25_uart_pin>; + pinctrl-8 = <&P2_25_can_pin>; + pinctrl-9 = <&P2_25_i2c_pin>; + }; + + /* P2_26 RESET# */ + + /* P2_27 (ZCZ ball E18) spi */ + P2_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "uart", "can", "i2c"; + pinctrl-0 = <&P2_27_default_pin>; + pinctrl-1 = <&P2_27_gpio_pin>; + pinctrl-2 = <&P2_27_gpio_pu_pin>; + pinctrl-3 = <&P2_27_gpio_pd_pin>; + pinctrl-4 = <&P2_27_gpio_input_pin>; + pinctrl-5 = <&P2_27_spi_pin>; + pinctrl-6 = <&P2_27_uart_pin>; + pinctrl-7 = <&P2_27_can_pin>; + pinctrl-8 = <&P2_27_i2c_pin>; + }; + + /* P2_28 (ZCZ ball D13) pruin */ + P2_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P2_28_default_pin>; + pinctrl-1 = <&P2_28_gpio_pin>; + pinctrl-2 = <&P2_28_gpio_pu_pin>; + pinctrl-3 = <&P2_28_gpio_pd_pin>; + pinctrl-4 = <&P2_28_gpio_input_pin>; + pinctrl-5 = <&P2_28_qep_pin>; + pinctrl-6 = <&P2_28_pruout_pin>; + pinctrl-7 = <&P2_28_pruin_pin>; + }; + + /* P2_29 (ZCZ ball C18) spi_sclk */ + P2_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "spi_sclk", "uart", "pwm", "pru_ecap"; + pinctrl-0 = <&P2_29_default_pin>; + pinctrl-1 = <&P2_29_gpio_pin>; + pinctrl-2 = <&P2_29_gpio_pu_pin>; + pinctrl-3 = <&P2_29_gpio_pd_pin>; + pinctrl-4 = <&P2_29_gpio_input_pin>; + pinctrl-5 = <&P2_29_spi_cs_pin>; + pinctrl-6 = <&P2_29_spi_sclk_pin>; + pinctrl-7 = <&P2_29_uart_pin>; + pinctrl-8 = <&P2_29_pwm_pin>; + pinctrl-9 = <&P2_29_pru_ecap_pin>; + }; + + /* P2_30 (ZCZ ball C12) pruin */ + P2_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P2_30_default_pin>; + pinctrl-1 = <&P2_30_gpio_pin>; + pinctrl-2 = <&P2_30_gpio_pu_pin>; + pinctrl-3 = <&P2_30_gpio_pd_pin>; + pinctrl-4 = <&P2_30_gpio_input_pin>; + pinctrl-5 = <&P2_30_spi_cs_pin>; + pinctrl-6 = <&P2_30_pwm_pin>; + pinctrl-7 = <&P2_30_pruout_pin>; + pinctrl-8 = <&P2_30_pruin_pin>; + }; + + /* P2_31 (ZCZ ball A15) spi_cs */ + P2_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "pruin"; + pinctrl-0 = <&P2_31_default_pin>; + pinctrl-1 = <&P2_31_gpio_pin>; + pinctrl-2 = <&P2_31_gpio_pu_pin>; + pinctrl-3 = <&P2_31_gpio_pd_pin>; + pinctrl-4 = <&P2_31_gpio_input_pin>; + pinctrl-5 = <&P2_31_spi_cs_pin>; + pinctrl-6 = <&P2_31_pruin_pin>; + }; + + /* P2_32 (ZCZ ball D12) pruin */ + P2_32_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P2_32_default_pin>; + pinctrl-1 = <&P2_32_gpio_pin>; + pinctrl-2 = <&P2_32_gpio_pu_pin>; + pinctrl-3 = <&P2_32_gpio_pd_pin>; + pinctrl-4 = <&P2_32_gpio_input_pin>; + pinctrl-5 = <&P2_32_spi_pin>; + pinctrl-6 = <&P2_32_pwm_pin>; + pinctrl-7 = <&P2_32_pruout_pin>; + pinctrl-8 = <&P2_32_pruin_pin>; + }; + + /* P2_33 (ZCZ ball R12) */ + P2_33_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout"; + pinctrl-0 = <&P2_33_default_pin>; + pinctrl-1 = <&P2_33_gpio_pin>; + pinctrl-2 = <&P2_33_gpio_pu_pin>; + pinctrl-3 = <&P2_33_gpio_pd_pin>; + pinctrl-4 = <&P2_33_gpio_input_pin>; + pinctrl-5 = <&P2_33_qep_pin>; + pinctrl-6 = <&P2_33_pruout_pin>; + }; + + /* P2_34 (ZCZ ball C13) pruin */ + P2_34_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P2_34_default_pin>; + pinctrl-1 = <&P2_34_gpio_pin>; + pinctrl-2 = <&P2_34_gpio_pu_pin>; + pinctrl-3 = <&P2_34_gpio_pd_pin>; + pinctrl-4 = <&P2_34_gpio_input_pin>; + pinctrl-5 = <&P2_34_qep_pin>; + pinctrl-6 = <&P2_34_pruout_pin>; + pinctrl-7 = <&P2_34_pruin_pin>; + }; + + /* P2_35 (ZCZ ball U5) gpio_input */ + P2_35_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P2_35_default_pin>; + pinctrl-1 = <&P2_35_gpio_pin>; + pinctrl-2 = <&P2_35_gpio_pu_pin>; + pinctrl-3 = <&P2_35_gpio_pd_pin>; + pinctrl-4 = <&P2_35_gpio_input_pin>; + pinctrl-5 = <&P2_35_pruout_pin>; + pinctrl-6 = <&P2_35_pruin_pin>; + }; + + /* P2_36 (ZCZ ball C9) AIN7 */ + + cape-universal { + compatible = "gpio-of-helper"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + P1_02 { + gpio-name = "P1_02"; + gpio = <&gpio2 23 0>; + input; + dir-changeable; + }; + + P1_04 { + gpio-name = "P1_04"; + gpio = <&gpio2 25 0>; + input; + dir-changeable; + }; + + P1_06 { + gpio-name = "P1_06"; + gpio = <&gpio0 5 0>; + input; + dir-changeable; + }; + + P1_08 { + gpio-name = "P1_08"; + gpio = <&gpio0 2 0>; + input; + dir-changeable; + }; + + P1_10 { + gpio-name = "P1_10"; + gpio = <&gpio0 3 0>; + input; + dir-changeable; + }; + + P1_12 { + gpio-name = "P1_12"; + gpio = <&gpio0 4 0>; + input; + dir-changeable; + }; + + P1_20 { + gpio-name = "P1_20"; + gpio = <&gpio0 20 0>; + input; + dir-changeable; + }; + + P1_26 { + gpio-name = "P1_26"; + gpio = <&gpio0 12 0>; + input; + dir-changeable; + }; + + P1_28 { + gpio-name = "P1_28"; + gpio = <&gpio0 13 0>; + input; + dir-changeable; + }; + + P1_29 { + gpio-name = "P1_29"; + gpio = <&gpio3 21 0>; + input; + dir-changeable; + }; + + P1_30 { + gpio-name = "P1_30"; + gpio = <&gpio1 11 0>; + input; + dir-changeable; + }; + + P1_31 { + gpio-name = "P1_31"; + gpio = <&gpio3 18 0>; + input; + dir-changeable; + }; + + P1_32 { + gpio-name = "P1_32"; + gpio = <&gpio1 10 0>; + input; + dir-changeable; + }; + + P1_33 { + gpio-name = "P1_33"; + gpio = <&gpio3 15 0>; + input; + dir-changeable; + }; + + P1_34 { + gpio-name = "P1_34"; + gpio = <&gpio0 26 0>; + input; + dir-changeable; + }; + + P1_35 { + gpio-name = "P1_35"; + gpio = <&gpio2 24 0>; + input; + dir-changeable; + }; + + P1_36 { + gpio-name = "P1_36"; + gpio = <&gpio3 14 0>; + input; + dir-changeable; + }; + + P2_01 { + gpio-name = "P2_01"; + gpio = <&gpio1 18 0>; + input; + dir-changeable; + }; + + P2_02 { + gpio-name = "P2_02"; + gpio = <&gpio1 27 0>; + input; + dir-changeable; + }; + + P2_03 { + gpio-name = "P2_03"; + gpio = <&gpio0 23 0>; + input; + dir-changeable; + }; + + P2_04 { + gpio-name = "P2_04"; + gpio = <&gpio1 26 0>; + input; + dir-changeable; + }; + + P2_05 { + gpio-name = "P2_05"; + gpio = <&gpio0 30 0>; + input; + dir-changeable; + }; + + P2_06 { + gpio-name = "P2_06"; + gpio = <&gpio1 25 0>; + input; + dir-changeable; + }; + + P2_07 { + gpio-name = "P2_07"; + gpio = <&gpio0 31 0>; + input; + dir-changeable; + }; + + P2_08 { + gpio-name = "P2_08"; + gpio = <&gpio1 28 0>; + input; + dir-changeable; + }; + + P2_09 { + gpio-name = "P2_09"; + gpio = <&gpio0 15 0>; + input; + dir-changeable; + }; + + P2_10 { + gpio-name = "P2_10"; + gpio = <&gpio1 20 0>; + input; + dir-changeable; + }; + + P2_11 { + gpio-name = "P2_11"; + gpio = <&gpio0 14 0>; + input; + dir-changeable; + }; + + P2_17 { + gpio-name = "P2_17"; + gpio = <&gpio2 1 0>; + input; + dir-changeable; + }; + + P2_18 { + gpio-name = "P2_18"; + gpio = <&gpio1 15 0>; + input; + dir-changeable; + }; + + P2_19 { + gpio-name = "P2_19"; + gpio = <&gpio0 27 0>; + input; + dir-changeable; + }; + + P2_20 { + gpio-name = "P2_20"; + gpio = <&gpio2 0 0>; + input; + dir-changeable; + }; + + P2_22 { + gpio-name = "P2_22"; + gpio = <&gpio1 14 0>; + input; + dir-changeable; + }; + + P2_24 { + gpio-name = "P2_24"; + gpio = <&gpio1 12 0>; + input; + dir-changeable; + }; + + P2_25 { + gpio-name = "P2_25"; + gpio = <&gpio1 9 0>; + input; + dir-changeable; + }; + + P2_27 { + gpio-name = "P2_27"; + gpio = <&gpio1 8 0>; + input; + dir-changeable; + }; + + P2_28 { + gpio-name = "P2_28"; + gpio = <&gpio3 20 0>; + input; + dir-changeable; + }; + + P2_29 { + gpio-name = "P2_29"; + gpio = <&gpio0 7 0>; + input; + dir-changeable; + }; + + P2_30 { + gpio-name = "P2_30"; + gpio = <&gpio3 17 0>; + input; + dir-changeable; + }; + + P2_31 { + gpio-name = "P2_31"; + gpio = <&gpio0 19 0>; + input; + dir-changeable; + }; + + P2_32 { + gpio-name = "P2_32"; + gpio = <&gpio3 16 0>; + input; + dir-changeable; + }; + + P2_33 { + gpio-name = "P2_33"; + gpio = <&gpio1 13 0>; + input; + dir-changeable; + }; + + P2_34 { + gpio-name = "P2_34"; + gpio = <&gpio3 19 0>; + input; + dir-changeable; + }; + + P2_35 { + gpio-name = "P2_35"; + gpio = <&gpio2 22 0>; + input; + dir-changeable; + }; + + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index c19082f..7acc147 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -37,8 +37,8 @@ phy1 = &usb1_phy; ethernet0 = &cpsw_emac0; ethernet1 = &cpsw_emac1; - spi0 = &spi0; - spi1 = &spi1; + spi1 = &spi0; + spi2 = &spi1; }; cpus { @@ -159,7 +159,7 @@ * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ - ocp { + ocp: ocp { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -306,6 +306,39 @@ #interrupt-cells = <2>; reg = <0x44e07000 0x1000>; interrupts = <96>; + gpio-line-names = + "MDIO_DATA", // 0 + "MDIO_CLK", // 1 + "SPI0_SCLK", // 2 + "SPI0_D0", // 3 + "SPI0_D1", // 4 + "SPI0_CS0", // 5 + "SPI0_CS1", // 6 + "ECAP0_IN_PWM0_OUT", // 7 + "LCD_DATA12", // 8 + "LCD_DATA13", // 9 + "LCD_DATA14", // 10 + "LCD_DATA15", // 11 + "UART1_CTSN", // 12 + "UART1_RTSN", // 13 + "UART1_RXD", // 14 + "UART1_TXD", // 15 + "GMII1_TXD3", // 16 + "GMII1_TXD2", // 17 + "USB0_DRVVBUS", // 18 + "XDMA_EVENT_INTR0", // 19 + "XDMA_EVENT_INTR1", // 20 + "GMII1_TXD1", // 21 + "GPMC_AD8", // 22 + "GPMC_AD9", // 23 + "NC", // 24 + "NC", // 25 + "GPMC_AD10", // 26 + "GPMC_AD11", // 27 + "GMII1_TXD0", // 28 + "RMII1_REFCLK", // 29 + "GPMC_WAIT0", // 30 + "GPMC_WPN"; // 31 }; gpio1: gpio@4804c000 { @@ -317,6 +350,39 @@ #interrupt-cells = <2>; reg = <0x4804c000 0x1000>; interrupts = <98>; + gpio-line-names = + "GPMC_AD0", // 0 + "GPMC_AD1", // 1 + "GPMC_AD2", // 2 + "GPMC_AD3", // 3 + "GPMC_AD4", // 4 + "GPMC_AD5", // 5 + "GPMC_AD6", // 6 + "GPMC_AD7", // 7 + "UART0_CTSN", // 8 + "UART0_RTSN", // 9 + "UART0_RXD", // 10 + "UART0_TXD", // 11 + "GPMC_AD12", // 12 + "GPMC_AD13", // 13 + "GPMC_AD14", // 14 + "GPMC_AD15", // 15 + "GPMC_A0", // 16 + "GPMC_A1", // 17 + "GPMC_A2", // 18 + "GPMC_A3", // 19 + "GPMC_A4", // 20 + "GPMC_A5", // 21 + "GPMC_A6", // 22 + "GPMC_A7", // 23 + "GPMC_A8", // 24 + "GPMC_A9", // 25 + "GPMC_A10", // 26 + "GPMC_A11", // 27 + "GPMC_BE1N", // 28 + "GPMC_CSN0", // 29 + "GPMC_CSN1", // 30 + "GPMC_CSN2"; // 31 }; gpio2: gpio@481ac000 { @@ -328,6 +394,39 @@ #interrupt-cells = <2>; reg = <0x481ac000 0x1000>; interrupts = <32>; + gpio-line-names = + "GPMC_CSN3", // 0 + "GPMC_CLK", // 1 + "GPMC_ADVN_ALE", // 2 + "GPMC_OEN_REN", // 3 + "GPMC_WEN", // 4 + "GPMC_BE0N_CLE", // 5 + "LCD_DATA0", // 6 + "LCD_DATA1", // 7 + "LCD_DATA2", // 8 + "LCD_DATA3", // 9 + "LCD_DATA4", // 10 + "LCD_DATA5", // 11 + "LCD_DATA6", // 12 + "LCD_DATA7", // 13 + "LCD_DATA8", // 14 + "LCD_DATA9", // 15 + "LCD_DATA10", // 16 + "LCD_DATA11", // 17 + "GMII1_RXD3", // 18 + "GMII1_RXD2", // 19 + "GMII1_RXD1", // 20 + "GMII1_RXD0", // 21 + "LCD_VSYNC", // 22 + "LCD_HSYNC", // 23 + "LCD_PCLK", // 24 + "LCD_AC_BIAS_EN", // 25 + "MMC0_DAT3", // 26 + "MMC0_DAT2", // 27 + "MMC0_DAT1", // 28 + "MMC0_DAT0", // 29 + "MMC0_CLK", // 30 + "MMC0_CMD"; // 31 }; gpio3: gpio@481ae000 { @@ -339,6 +438,39 @@ #interrupt-cells = <2>; reg = <0x481ae000 0x1000>; interrupts = <62>; + gpio-line-names = + "GMII1_COL", // 0 + "GMII1_CRS", // 1 + "GMII1_RXER", // 2 + "GMII1_TXEN", // 3 + "GMII1_RXDV", // 4 + "I2C0_SDA", // 5 + "I2C0_SCL", // 6 + "EMU0", // 7 + "EMU1", // 8 + "GMII1_TXCLK", // 9 + "GMII1_RXCLK", // 10 + "NC", // 11 + "NC", // 12 + "USB1_DRVVBUS", // 13 + "MCASP0_ACLKX", // 14 + "MCASP0_FSX", // 15 + "MCASP0_AXR0", // 16 + "MCASP0_AHCLKR", // 17 + "MCASP0_ACLKR", // 18 + "MCASP0_FSR", // 19 + "MCASP0_AXR1", // 20 + "MCASP0_AHCLKX", // 21 + "NC", // 22 + "NC", // 23 + "NC", // 24 + "NC", // 25 + "NC", // 26 + "NC", // 27 + "NC", // 28 + "NC", // 29 + "NC", // 30 + "NC"; // 31 }; uart0: serial@44e09000 { @@ -770,6 +902,16 @@ status = "disabled"; }; + eqep0: eqep@0x48300180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48300180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupt-parent = <&intc>; + interrupts = <79>; + status = "disabled"; + }; + ehrpwm0: pwm@48300200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; @@ -804,6 +946,16 @@ status = "disabled"; }; + eqep1: eqep@0x48302180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48302180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupt-parent = <&intc>; + interrupts = <88>; + status = "disabled"; + }; + ehrpwm1: pwm@48302200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; @@ -838,6 +990,16 @@ status = "disabled"; }; + eqep2: eqep@0x48304180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48304180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupt-parent = <&intc>; + interrupts = <89>; + status = "disabled"; + }; + ehrpwm2: pwm@48304200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index ad95311..cefaa26 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -167,6 +167,10 @@ }; }; +&bb2d { + status = "okay"; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 7ce24b2..64034c8 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1030,6 +1030,16 @@ ti,hwmods = "dmm"; }; + bb2d: bb2d@59000000 { + compatible = "ti,dra7-bb2d","vivante,gc"; + reg = <0x59000000 0x0700>; + interrupts = ; + ti,hwmods = "bb2d"; + clocks = <&dpll_core_h24x2_ck>; + clock-names = "fclk"; + status = "disabled"; + }; + i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; diff --git b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts new file mode 100644 index 0000000..29b6b8e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts @@ -0,0 +1,302 @@ +/* + * Copyright (C) 2015 Robert Nelson (robertcnelson@gmail.com) + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include +#include "imx6q.dtsi" + +/ { + model = "Digi ConnectCore-i.MX6 SBC Board"; + compatible = "digi,connectcore/q", "fsl,imx6q"; + + chosen { + stdout-path = &uart4; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usbh1_reset: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usbh1_reset"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <17 0x8>; /* active-low GPIO0_17 */ + + regulators { + vdd_3v3_reg: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-ccimx6sbc { + pinctrl_hog: hoggrp { + fsl,pins = < + /* da9063*/ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + /* need to force low for hub reset */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x10b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x10b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_reset>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + broken-cd; /* cd & wp, is not wired up on this board */ + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index fcd257b..d32fa81 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -54,18 +54,6 @@ reg = <0x10000000 0x40000000>; }; - reg_usbh1_vbus: regulator-usbhubreset { - compatible = "regulator-fixed"; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - startup-delay-us = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1_hubreset>; - gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; - }; - reg_usb_otg_vbus: regulator-usbotgvbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; @@ -213,12 +201,18 @@ }; &usbh1 { - vbus-supply = <®_usbh1_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; dr_mode = "host"; disable-over-current; status = "okay"; + + usb2415host: hub@1 { + compatible = "usb424,2513"; + reg = <1>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-duration-us = <3000>; + }; }; &usbotg { @@ -481,11 +475,6 @@ MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0 /* usbh1_b OC */ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 - >; - }; - - pinctrl_usbh1_hubreset: usbh1hubresetgrp { - fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 4f27861..2e10ae8 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -5,6 +5,8 @@ * Author: Fabio Estevam */ +#include + / { aliases { backlight = &backlight; @@ -61,17 +63,6 @@ #address-cells = <1>; #size-cells = <0>; - reg_usb_h1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ - gpio = <&gpio7 12 0>; - }; - reg_panel: regulator@1 { compatible = "regulator-fixed"; reg = <1>; @@ -92,6 +83,17 @@ mux-int-port = <1>; mux-ext-port = <6>; }; + + udoo_ard: udoo_ard_manager { + compatible = "udoo,imx6q-udoo-ard"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_udooard>; + bossac-clk-gpio = <&gpio6 3 0>; + bossac-dat-gpio = <&gpio5 18 0>; + bossac-erase-gpio = <&gpio4 21 0>; + bossac-reset-gpio = <&gpio1 0 0>; + status = "okay"; + }; }; &fec { @@ -195,13 +197,29 @@ >; }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + pinctrl_usbh: usbhgrp { fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 >; }; + pinctrl_udooard: udooardgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x80000000 + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x80000000 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x80000000 + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -265,12 +283,25 @@ status = "okay"; }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh>; - vbus-supply = <®_usb_h1_vbus>; - clocks = <&clks IMX6QDL_CLK_CKO>; status = "okay"; + + usb2415: hub@1 { + compatible = "usb424,2514"; + reg = <1>; + + clocks = <&clks IMX6QDL_CLK_CKO>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-duration-us = <3000>; + }; }; &usdhc3 { diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi index 855dc6f..8476b89 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi @@ -11,6 +11,24 @@ #include "imx6qdl-wandboard.dtsi" +/ { + rfkill { + compatible = "wand,imx6qdl-wandboard-rfkill"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + bluetooth-on = <&gpio3 13 0>; + bluetooth-wake = <&gpio3 14 0>; + bluetooth-host-wake = <&gpio3 15 0>; + + wifi-ref-on = <&gpio2 29 0>; + wifi-rst-n = <&gpio5 2 0>; + wifi-reg-on = <&gpio1 26 0>; + wifi-host-wake = <&gpio1 29 0>; + wifi-wake = <&gpio1 30 0>; + }; +}; + &iomuxc { pinctrl-0 = <&pinctrl_hog>; @@ -36,6 +54,5 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi index 49a0a55..a909ac6 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi @@ -11,6 +11,24 @@ #include "imx6qdl-wandboard.dtsi" +/ { + rfkill { + compatible = "wand,imx6qdl-wandboard-rfkill"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + bluetooth-on = <&gpio5 21 0>; + bluetooth-wake = <&gpio5 30 0>; + bluetooth-host-wake = <&gpio5 20 0>; + + wifi-ref-on = <&gpio5 31 0>; /* Wifi Power Enable */ + wifi-rst-n = <&gpio6 0 0>; /* WIFI_ON reset */ + wifi-reg-on = <&gpio1 26 0>; /* WL_REG_ON */ + wifi-host-wake = <&gpio1 29 0>; /* WL_HOST_WAKE */ + wifi-wake = <&gpio1 30 0>; /* WL_WAKE */ + }; +}; + &iomuxc { pinctrl-0 = <&pinctrl_hog>; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi index 69d9c86..e8a567e 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi @@ -12,6 +12,26 @@ #include "imx6qdl-wandboard.dtsi" / { + rfkill { + compatible = "wand,imx6qdl-wandboard-rfkill"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + bluetooth-on = <&gpio5 30 0>; /* BT_RST_N */ + bluetooth-wake = <&gpio5 21 0>; /* BT_WAKE */ + bluetooth-host-wake = <&gpio5 20 0>; /* BT_HOST_WAKE */ + + wifi-ref-on = <&gpio6 0 0>; /* WIFI_ON: M4: CSI0_DAT14 */ + wifi-reg-on = <&gpio1 26 0>; /* WL_REG_ON: W22: ENET_RXD1 */ + wifi-host-wake = <&gpio1 29 0>; /* WL_HOST_WAKE: W20: ENET_TXD1 */ + + //HACK: use un-populated pins for missing rfkill pins, dont want to fix the driver... + //GPIO6_IO17 - SD3_DAT7 + //GPIO6_IO18 - SD3_DAT6 + wifi-rst-n = <&gpio6 17 0>; /* NOT POPULATED */ + wifi-wake = <&gpio6 18 0>; /* NOT POPULATED */ + }; + reg_eth_phy: regulator-eth-phy { compatible = "regulator-fixed"; regulator-name = "ETH_PHY"; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 0ca4565..4bbcea5 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -964,6 +964,8 @@ usbh1: usb@2184200 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x02184200 0x200>; interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; @@ -978,6 +980,8 @@ usbh2: usb@2184400 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x02184400 0x200>; interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; @@ -991,6 +995,8 @@ usbh3: usb@2184600 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x02184600 0x200>; interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; diff --git b/arch/arm/boot/dts/imx6ul-14x14-evk-ism43362-b81-evb.dts b/arch/arm/boot/dts/imx6ul-14x14-evk-ism43362-b81-evb.dts new file mode 100644 index 0000000..4920beb --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-14x14-evk-ism43362-b81-evb.dts @@ -0,0 +1,529 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6ul.dtsi" + +/ { + model = "Freescale i.MX6 UltraLite 14x14 EVK Board"; + compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + backlight_display: backlight-display { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_sd1_vmmc: sd1_regulator { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + wlreg_on: fixedregulator@100 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "wlreg_on"; + gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "mx6ul-wm8960"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Speaker", "SPK_LP", + "Speaker", "SPK_LN", + "Speaker", "SPK_RP", + "Speaker", "SPK_RN", + "LINPUT1", "Mic Jack", + "LINPUT3", "Mic Jack", + "RINPUT1", "Mic Jack", + "RINPUT2", "Mic Jack"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clks IMX6UL_CLK_SAI2>; + }; + }; + + panel { + compatible = "innolux,at043tn24"; + backlight = <&backlight_display>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec: wm8960@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8960"; + reg = <0x1a>; + wlf,shared-lrclk; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + mag3110@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + }; +}; + +&lcdif { + assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash0: n25q256a@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + reg = <0>; + }; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xfff>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; +}; + +&usbphy2 { + fsl,tx-d-cal = <106>; +}; + +®_sd1_vmmc { + regulator-always-on; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_csi1: csi1grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 + MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 + MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 + MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088 + MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088 + MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088 + MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088 + MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088 + MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088 + MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088 + MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088 + MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059 + >; + }; + + pinctrl_flexcan1: flexcan1grp{ + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + /* used for lcd reset */ + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 + >; + }; + + pinctrl_sim2: sim2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0xb808 + MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x31 + MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0xb808 + MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0xb808 + MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0xb809 + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x3008 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1 + MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */ + MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */ + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x3029 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x3029 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x3029 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts index ee02d93..f623196 100644 --- a/arch/arm/boot/dts/imx7d-pico-pi.dts +++ b/arch/arm/boot/dts/imx7d-pico-pi.dts @@ -43,6 +43,10 @@ #include "imx7d-pico.dtsi" / { + chosen { + stdout-path = "serial4:115200n8"; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 9985ee2..7c6f73f 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -155,6 +155,7 @@ }; etb@5401b000 { + status = "disabled"; compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x5401b000 0x1000>; @@ -170,6 +171,7 @@ }; etm@54010000 { + status = "disabled"; compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x54010000 0x1000>; @@ -217,6 +219,25 @@ >; }; + spi3_pins: pinmux_spi3_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT | MUX_MODE1) /* sdmmc2_clk.mcspi3_clk gpio_130 */ + 0x12a (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_cmd.mcspi3_simo gpio_131 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat0.mcspi3_somi gpio_132 */ + 0x130 (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat2.mcspi3_cs1 gpio_134 */ + 0x132 (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat3.mcspi3_cs0 gpio_135 */ + >; + }; + + spi4_pins: pinmux_spi4_pins { + pinctrl-single,pins = < + 0x15c (PIN_INPUT | MUX_MODE1) /* mcbsp1_clkr.mcspi4_clk gpio_156 */ + 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcbsp1_dx.mcspi4_simo gpio_158 */ + 0x162 (PIN_INPUT_PULLUP | MUX_MODE1) /* mcbsp1_dr.mcspi4_somi gpio_159 */ + 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcbsp1_fsx.mcspi4_cs0 gpio_161 */ + >; + }; + hsusb2_pins: pinmux_hsusb2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ @@ -294,7 +315,7 @@ }; twl_power: power { - compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; + compatible = "ti,twl4030-power-reset"; ti,use_poweroff; }; }; @@ -325,6 +346,36 @@ status = "disabled"; }; +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <48000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <48000000>; + }; +}; + +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + status = "okay"; + + spidev2: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <48000000>; + }; +}; + &twl_gpio { ti,use-leds; /* pullups: BIT(1) */ diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 91bb50a..80ebdfb 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -142,6 +142,7 @@ }; etb@540000000 { + status = "disabled"; compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x5401b000 0x1000>; @@ -157,6 +158,7 @@ }; etm@54010000 { + status = "disabled"; compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x54010000 0x1000>; @@ -275,9 +277,18 @@ codec { }; }; + + twl_power: power { + compatible = "ti,twl4030-power-reset"; + ti,use_poweroff; + }; }; }; +&i2c2 { + clock-frequency = <400000>; +}; + #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index f1a6476..63b895b 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -10,6 +10,18 @@ #include "omap443x.dtsi" #include "omap4-panda-common.dtsi" +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 27895c1..bcdfe29 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -491,16 +491,6 @@ }; }; -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - &mcbsp1 { pinctrl-names = "default"; pinctrl-0 = <&mcbsp1_pins>; diff --git b/arch/arm/boot/dts/omap4-panda-es-b3.dts b/arch/arm/boot/dts/omap4-panda-es-b3.dts new file mode 100644 index 0000000..19d02df --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-es-b3.dts @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap4460.dtsi" +#include "omap4-panda-common.dtsi" + +/ { + model = "TI OMAP4 PandaBoard-ES"; + compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; +}; + +/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ +&sound { + ti,model = "PandaBoardES"; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "AFML", "Line In", + "AFMR", "Line In"; +}; + +/* PandaboardES has external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + >; +}; + +&omap4_pmx_core { + led_gpio_pins: gpio_led_pmx { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ + >; + }; +}; + +&led_wkgpio_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; +}; + +&leds { + pinctrl-0 = < + &led_gpio_pins + &led_wkgpio_pins + >; + + heartbeat { + gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; + }; + mmc { + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&gpio_keys { + buttonS2 { + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */ + }; +}; + +&gpio1_target { + ti,no-reset-on-init; +}; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 19d02df..027b587 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -15,6 +15,18 @@ compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; }; +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ &sound { ti,model = "PandaBoardES"; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index a0e28b2..3ee41ef 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -14,3 +14,15 @@ model = "TI OMAP4 PandaBoard"; compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 9dc7ec7..c78d3aa 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -503,11 +503,13 @@ &emif1 { cs1-used; device-handle = <&elpida_ECB240ABACN>; + status = "ok"; }; &emif2 { cs1-used; device-handle = <&elpida_ECB240ABACN>; + status = "ok"; }; &keypad { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 1a96d43..142ba6b 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -403,6 +403,7 @@ hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; + status = "disabled"; }; emif2: emif@4d000000 { @@ -415,6 +416,7 @@ hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; + status = "disabled"; }; timer5: timer@40138000 { diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 6ffe572..bb7bd88 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -68,3 +68,9 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX config IMX_HAVE_PLATFORM_SPI_IMX bool + +config WAND_RFKILL + tristate "Wandboard RF Kill support" + depends on SOC_IMX6Q + default m + select RFKILL diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index e44758a..c179a55 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o +obj-$(CONFIG_WAND_RFKILL) += wand-rfkill.o diff --git b/arch/arm/mach-imx/devices/wand-rfkill.c b/arch/arm/mach-imx/devices/wand-rfkill.c new file mode 100644 index 0000000..da7ef9f --- /dev/null +++ b/arch/arm/mach-imx/devices/wand-rfkill.c @@ -0,0 +1,290 @@ +/* + * arch/arm/mach-imx/devices/wand-rfkill.c + * + * Copyright (C) 2013 Vladimir Ermakov + * + * based on net/rfkill/rfkill-gpio.c + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +struct wand_rfkill_data { + struct rfkill *rfkill_dev; + int shutdown_gpio; + const char *shutdown_name; +}; + +static int wand_rfkill_set_block(void *data, bool blocked) +{ + struct wand_rfkill_data *rfkill = data; + + pr_debug("wandboard-rfkill: set block %d\n", blocked); + + if (blocked) { + if (gpio_is_valid(rfkill->shutdown_gpio)) + gpio_direction_output(rfkill->shutdown_gpio, 0); + } else { + if (gpio_is_valid(rfkill->shutdown_gpio)) + gpio_direction_output(rfkill->shutdown_gpio, 1); + } + + return 0; +} + +static const struct rfkill_ops wand_rfkill_ops = { + .set_block = wand_rfkill_set_block, +}; + +static int wand_rfkill_wifi_probe(struct device *dev, + struct device_node *np, + struct wand_rfkill_data *rfkill) +{ + int ret; + int wl_ref_on, wl_rst_n, wl_reg_on, wl_wake, wl_host_wake; + + wl_ref_on = of_get_named_gpio(np, "wifi-ref-on", 0); + wl_rst_n = of_get_named_gpio(np, "wifi-rst-n", 0); + wl_reg_on = of_get_named_gpio(np, "wifi-reg-on", 0); + wl_wake = of_get_named_gpio(np, "wifi-wake", 0); + wl_host_wake = of_get_named_gpio(np, "wifi-host-wake", 0); + + if (!gpio_is_valid(wl_rst_n) || !gpio_is_valid(wl_ref_on) || + !gpio_is_valid(wl_reg_on) || !gpio_is_valid(wl_wake) || + !gpio_is_valid(wl_host_wake)) { + + dev_err(dev, "incorrect wifi gpios (%d %d %d %d %d)\n", + wl_rst_n, wl_ref_on, wl_reg_on, wl_wake, wl_host_wake); + return -EINVAL; + } + + dev_info(dev, "initialize wifi chip\n"); + + gpio_request(wl_rst_n, "wl_rst_n"); + gpio_direction_output(wl_rst_n, 0); + msleep(11); + gpio_set_value(wl_rst_n, 1); + + gpio_request(wl_ref_on, "wl_ref_on"); + gpio_direction_output(wl_ref_on, 1); + + gpio_request(wl_reg_on, "wl_reg_on"); + gpio_direction_output(wl_reg_on, 1); + + gpio_request(wl_wake, "wl_wake"); + gpio_direction_output(wl_wake, 1); + + gpio_request(wl_host_wake, "wl_host_wake"); + gpio_direction_input(wl_host_wake); + + rfkill->shutdown_name = "wifi_shutdown"; + rfkill->shutdown_gpio = wl_wake; + + rfkill->rfkill_dev = rfkill_alloc("wifi-rfkill", dev, RFKILL_TYPE_WLAN, + &wand_rfkill_ops, rfkill); + if (!rfkill->rfkill_dev) { + ret = -ENOMEM; + goto wifi_fail_free_gpio; + } + + ret = rfkill_register(rfkill->rfkill_dev); + if (ret < 0) + goto wifi_fail_unregister; + + dev_info(dev, "wifi-rfkill registered.\n"); + + return 0; + +wifi_fail_unregister: + rfkill_destroy(rfkill->rfkill_dev); +wifi_fail_free_gpio: + if (gpio_is_valid(wl_rst_n)) gpio_free(wl_rst_n); + if (gpio_is_valid(wl_ref_on)) gpio_free(wl_ref_on); + if (gpio_is_valid(wl_reg_on)) gpio_free(wl_reg_on); + if (gpio_is_valid(wl_wake)) gpio_free(wl_wake); + if (gpio_is_valid(wl_host_wake)) gpio_free(wl_host_wake); + + return ret; +} + +static int wand_rfkill_bt_probe(struct device *dev, + struct device_node *np, + struct wand_rfkill_data *rfkill) +{ + int ret; + int bt_on, bt_wake, bt_host_wake; + + bt_on = of_get_named_gpio(np, "bluetooth-on", 0); + bt_wake = of_get_named_gpio(np, "bluetooth-wake", 0); + bt_host_wake = of_get_named_gpio(np, "bluetooth-host-wake", 0); + + if (!gpio_is_valid(bt_on) || !gpio_is_valid(bt_wake) || + !gpio_is_valid(bt_host_wake)) { + + dev_err(dev, "incorrect bt gpios (%d %d %d)\n", + bt_on, bt_wake, bt_host_wake); + return -EINVAL; + } + + dev_info(dev, "initialize bluetooth chip\n"); + + gpio_request(bt_on, "bt_on"); + gpio_direction_output(bt_on, 0); + msleep(11); + gpio_set_value(bt_on, 1); + + gpio_request(bt_wake, "bt_wake"); + gpio_direction_output(bt_wake, 1); + + gpio_request(bt_host_wake, "bt_host_wake"); + gpio_direction_input(bt_host_wake); + + rfkill->shutdown_name = "bluetooth_shutdown"; + rfkill->shutdown_gpio = bt_wake; + + rfkill->rfkill_dev = rfkill_alloc("bluetooth-rfkill", dev, RFKILL_TYPE_BLUETOOTH, + &wand_rfkill_ops, rfkill); + if (!rfkill->rfkill_dev) { + ret = -ENOMEM; + goto bt_fail_free_gpio; + } + + ret = rfkill_register(rfkill->rfkill_dev); + if (ret < 0) + goto bt_fail_unregister; + + dev_info(dev, "bluetooth-rfkill registered.\n"); + + return 0; + +bt_fail_unregister: + rfkill_destroy(rfkill->rfkill_dev); +bt_fail_free_gpio: + if (gpio_is_valid(bt_on)) gpio_free(bt_on); + if (gpio_is_valid(bt_wake)) gpio_free(bt_wake); + if (gpio_is_valid(bt_host_wake)) gpio_free(bt_host_wake); + + return ret; +} + +static int wand_rfkill_probe(struct platform_device *pdev) +{ + struct wand_rfkill_data *rfkill; + struct pinctrl *pinctrl; + int ret; + + dev_info(&pdev->dev, "Wandboard rfkill initialization\n"); + + if (!pdev->dev.of_node) { + dev_err(&pdev->dev, "no device tree node\n"); + return -ENODEV; + } + + rfkill = kzalloc(sizeof(*rfkill) * 2, GFP_KERNEL); + if (!rfkill) + return -ENOMEM; + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + int ret = PTR_ERR(pinctrl); + dev_err(&pdev->dev, "failed to get default pinctrl: %d\n", ret); + return ret; + } + + /* setup WiFi */ + ret = wand_rfkill_wifi_probe(&pdev->dev, pdev->dev.of_node, &rfkill[0]); + if (ret < 0) + goto fail_free_rfkill; + + /* setup bluetooth */ + ret = wand_rfkill_bt_probe(&pdev->dev, pdev->dev.of_node, &rfkill[1]); + if (ret < 0) + goto fail_unregister_wifi; + + platform_set_drvdata(pdev, rfkill); + + return 0; + +fail_unregister_wifi: + if (rfkill[1].rfkill_dev) { + rfkill_unregister(rfkill[1].rfkill_dev); + rfkill_destroy(rfkill[1].rfkill_dev); + } + + /* TODO free gpio */ + +fail_free_rfkill: + kfree(rfkill); + + return ret; +} + +static int wand_rfkill_remove(struct platform_device *pdev) +{ + struct wand_rfkill_data *rfkill = platform_get_drvdata(pdev); + + dev_info(&pdev->dev, "Module unloading\n"); + + if (!rfkill) + return 0; + + /* WiFi */ + if (gpio_is_valid(rfkill[0].shutdown_gpio)) + gpio_free(rfkill[0].shutdown_gpio); + + rfkill_unregister(rfkill[0].rfkill_dev); + rfkill_destroy(rfkill[0].rfkill_dev); + + /* Bt */ + if (gpio_is_valid(rfkill[1].shutdown_gpio)) + gpio_free(rfkill[1].shutdown_gpio); + + rfkill_unregister(rfkill[1].rfkill_dev); + rfkill_destroy(rfkill[1].rfkill_dev); + + kfree(rfkill); + + return 0; +} + +static struct of_device_id wand_rfkill_match[] = { + { .compatible = "wand,imx6q-wandboard-rfkill", }, + { .compatible = "wand,imx6dl-wandboard-rfkill", }, + { .compatible = "wand,imx6qdl-wandboard-rfkill", }, + {} +}; + +static struct platform_driver wand_rfkill_driver = { + .driver = { + .name = "wandboard-rfkill", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(wand_rfkill_match), + }, + .probe = wand_rfkill_probe, + .remove = wand_rfkill_remove +}; + +module_platform_driver(wand_rfkill_driver); + +MODULE_AUTHOR("Vladimir Ermakov "); +MODULE_DESCRIPTION("Wandboard rfkill driver"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 41c7b90..18c95c8 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -141,8 +141,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct omap_hwmod *oh; struct device_node *node = pdev->dev.of_node; struct resource res; - const char *oh_name; - int oh_cnt, i, ret = 0; + const char *oh_name, *rst_name; + int oh_cnt, dstr_cnt, i, ret = 0; bool device_active = false, skip_pm_domain = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); @@ -189,6 +189,26 @@ static int omap_device_build_from_dt(struct platform_device *pdev) ret = PTR_ERR(od); goto odbfd_exit1; } + dstr_cnt = + of_property_count_strings(node, "ti,deassert-hard-reset"); + if (dstr_cnt > 0) { + for (i = 0; i < dstr_cnt; i += 2) { + of_property_read_string_index( + node, "ti,deassert-hard-reset", i, + &oh_name); + of_property_read_string_index( + node, "ti,deassert-hard-reset", i+1, + &rst_name); + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + dev_warn(&pdev->dev, + "Cannot parse deassert property for '%s'\n", + oh_name); + break; + } + omap_hwmod_deassert_hardreset(oh, rst_name); + } + } /* Fix up missing resource names */ for (i = 0; i < pdev->num_resources; i++) { diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c index 59f6a3e..154cfe3 100644 --- a/drivers/clk/imx/clk-imx6q.c +++ b/drivers/clk/imx/clk-imx6q.c @@ -917,5 +917,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) } imx_register_uart_clocks(uart_clks); + + if (of_machine_is_compatible("udoo,imx6dl-udoo") || + of_machine_is_compatible("udoo,imx6q-udoo")) + clk_prepare_enable(clk[IMX6QDL_CLK_CKO]); + } CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 833a1b5..7f32098 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -73,6 +73,20 @@ config GPIO_SYSFS Kernel drivers may also request that a particular GPIO be exported to userspace; this can be useful when debugging. +config GPIO_OF_HELPER + bool "GPIO OF helper device (EXPERIMENTAL)" + depends on OF_GPIO + help + Say Y here to add an GPIO OF helper driver + + Allows you specify a GPIO helper based on OF + which allows simple export of GPIO functionality + in user-space. + + Features include, value set/get, direction control, + interrupt/value change poll support, event counting + and others. + config GPIO_GENERIC depends on HAS_IOMEM # Only for IOMEM drivers tristate diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 671c447..0b28578 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_GPIOLIB) += gpiolib-devprop.o obj-$(CONFIG_OF_GPIO) += gpiolib-of.o obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o +obj-$(CONFIG_GPIO_OF_HELPER) += gpio-of-helper.o # Device drivers. Generally keep list sorted alphabetically obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o diff --git b/drivers/gpio/gpio-of-helper.c b/drivers/gpio/gpio-of-helper.c new file mode 100644 index 0000000..83f362f --- /dev/null +++ b/drivers/gpio/gpio-of-helper.c @@ -0,0 +1,435 @@ +/* + * GPIO OF based helper + * + * A simple DT based driver to provide access to GPIO functionality + * to user-space via sysfs. + * + * Copyright (C) 2013 Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* fwd decl. */ +struct gpio_of_helper_info; + +enum gpio_type { + GPIO_TYPE_INPUT = 0, + GPIO_TYPE_OUTPUT = 1, +}; + +struct gpio_of_entry { + int id; + struct gpio_of_helper_info *info; + struct device_node *node; + enum gpio_type type; + int gpio; + int irq; + const char *name; + atomic64_t counter; + unsigned int count_flags; +#define COUNT_RISING_EDGE (1 << 0) +#define COUNT_FALLING_EDGE (1 << 1) +}; + +struct gpio_of_helper_info { + struct platform_device *pdev; + struct idr idr; +}; + +static const struct of_device_id gpio_of_helper_of_match[] = { + { + .compatible = "gpio-of-helper", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, gpio_of_helper_of_match); + +static ssize_t gpio_of_helper_show_status(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_of_helper_info *info = platform_get_drvdata(pdev); + struct gpio_of_entry *entry; + char *p, *e; + int id, n; + + p = buf; + e = p + PAGE_SIZE; + n = 0; + idr_for_each_entry(&info->idr, entry, id) { + switch (entry->type) { + case GPIO_TYPE_INPUT: + n = snprintf(p, e - p, "%2d %-24s %3d %-3s %llu\n", + entry->id, entry->name, entry->gpio, "IN", + (unsigned long long) + atomic64_read(&entry->counter)); + break; + case GPIO_TYPE_OUTPUT: + n = snprintf(p, e - p, "%2d %-24s %3d %-3s\n", + entry->id, entry->name, entry->gpio, "OUT"); + break; + } + p += n; + } + + return p - buf; +} + +static DEVICE_ATTR(status, S_IRUGO, + gpio_of_helper_show_status, NULL); + +static irqreturn_t gpio_of_helper_handler(int irq, void *ptr) +{ + struct gpio_of_entry *entry = ptr; + + /* caution - low speed interfaces only! */ + atomic64_inc(&entry->counter); + + return IRQ_HANDLED; +} + +static struct gpio_of_entry * +gpio_of_entry_create(struct gpio_of_helper_info *info, + struct device_node *node) +{ + struct platform_device *pdev = info->pdev; + struct device *dev = &pdev->dev; + struct gpio_of_entry *entry; + int err, gpio, irq; + unsigned int req_flags, count_flags, irq_flags; + enum gpio_type type; + enum of_gpio_flags gpio_flags; + const char *name; + + /* get the type of the node first */ + if (of_property_read_bool(node, "input")) + type = GPIO_TYPE_INPUT; + else if (of_property_read_bool(node, "output") + || of_property_read_bool(node, "init-low") + || of_property_read_bool(node, "init-high")) + type = GPIO_TYPE_OUTPUT; + else { + dev_err(dev, "Not valid gpio node type\n"); + err = -EINVAL; + goto err_bad_node; + } + + /* get the name */ + if (of_property_read_string(node, "line-name", &name)) + if (of_property_read_string(node, "gpio-name", &name)) + name = node->name; + + err = of_get_named_gpio_flags(node, "gpio", 0, &gpio_flags); + if (IS_ERR_VALUE(err)) { + dev_err(dev, "Failed to get gpio property of '%s'\n", name); + goto err_bad_node; + } + gpio = err; + + req_flags = 0; + count_flags = 0; + + /* set the request flags */ + switch (type) { + case GPIO_TYPE_INPUT: + req_flags = GPIOF_DIR_IN | GPIOF_EXPORT; + if (of_property_read_bool(node, "count-falling-edge")) + count_flags |= COUNT_FALLING_EDGE; + if (of_property_read_bool(node, "count-rising-edge")) + count_flags |= COUNT_RISING_EDGE; + break; + case GPIO_TYPE_OUTPUT: + req_flags = GPIOF_DIR_OUT | GPIOF_EXPORT; + if (of_property_read_bool(node, "init-high")) + req_flags |= GPIOF_OUT_INIT_HIGH; + else if (of_property_read_bool(node, "init-low")) + req_flags |= GPIOF_OUT_INIT_LOW; + break; + } + if (of_property_read_bool(node, "dir-changeable")) + req_flags |= GPIOF_EXPORT_CHANGEABLE; + if (gpio_flags & OF_GPIO_ACTIVE_LOW) + req_flags |= GPIOF_ACTIVE_LOW; + if (gpio_flags & OF_GPIO_SINGLE_ENDED) { + if (gpio_flags & OF_GPIO_ACTIVE_LOW) + req_flags |= GPIOF_OPEN_DRAIN; + else + req_flags |= GPIOF_OPEN_SOURCE; + } + + /* request the gpio */ + err = devm_gpio_request_one(dev, gpio, req_flags, name); + if (err != 0) { + dev_err(dev, "Failed to request gpio '%s'\n", name); + goto err_bad_node; + } + + irq = -1; + irq_flags = 0; + + /* counter mode requested - need an interrupt */ + if (count_flags != 0) { + irq = gpio_to_irq(gpio); + if (IS_ERR_VALUE(irq)) { + dev_err(dev, "Failed to request gpio '%s'\n", name); + goto err_bad_node; + } + + if (count_flags & COUNT_RISING_EDGE) + irq_flags |= IRQF_TRIGGER_RISING; + if (count_flags & COUNT_FALLING_EDGE) + irq_flags |= IRQF_TRIGGER_FALLING; + } + +// if (!idr_pre_get(&info->idr, GFP_KERNEL)) { +// dev_err(dev, "Failed on idr_pre_get of '%s'\n", name); +// err = -ENOMEM; +// goto err_no_mem; +// } + + idr_preload(GFP_KERNEL); + + entry = devm_kzalloc(dev, sizeof(*entry), GFP_KERNEL); + if (entry == NULL) { + dev_err(dev, "Failed to allocate gpio entry of '%s'\n", name); + err = -ENOMEM; + goto err_no_mem; + } + + entry->id = -1; + entry->info = info; + entry->node = of_node_get(node); /* get node reference */ + entry->type = type; + entry->gpio = gpio; + entry->irq = irq; + entry->name = name; + + /* interrupt enable is last thing done */ + if (irq >= 0) { + atomic64_set(&entry->counter, 0); + entry->count_flags = count_flags; + err = devm_request_irq(dev, irq, gpio_of_helper_handler, + irq_flags, name, entry); + if (err != 0) { + dev_err(dev, "Failed to request irq of '%s'\n", name); + goto err_no_irq; + } + } + + /* all done; insert */ +// err = idr_get_new(&info->idr, entry, &entry->id); +// if (IS_ERR_VALUE(err)) { +// dev_err(dev, "Failed to idr_get_new of '%s'\n", name); +// goto err_fail_idr; +// } + + err = idr_alloc(&info->idr, entry, 0, 0, GFP_NOWAIT); + if (err >= 0) + entry->id = err; + + idr_preload_end(); + + if (err < 0) { + dev_err(dev, "Failed to idr_get_new of '%s'\n", name); + goto err_fail_idr; + } + + dev_dbg(dev, "Allocated GPIO id=%d name='%s'\n", entry->id, name); + + return entry; + +err_fail_idr: + /* nothing to do */ +err_no_irq: + /* release node ref */ + of_node_put(node); + /* nothing else needs to be done, devres handles it */ +err_no_mem: +err_bad_node: + return ERR_PTR(err); +} + +static int gpio_of_entry_destroy(struct gpio_of_entry *entry) +{ + struct gpio_of_helper_info *info = entry->info; + struct platform_device *pdev = info->pdev; + struct device *dev = &pdev->dev; + + dev_dbg(dev, "Destroying GPIO id=%d\n", entry->id); + + /* remove from the IDR */ + idr_remove(&info->idr, entry->id); + + /* remove node ref */ + of_node_put(entry->node); + + /* free gpio */ + devm_gpio_free(dev, entry->gpio); + + /* gree irq */ + if (entry->irq >= 0) + devm_free_irq(dev, entry->irq, entry); + + /* and free */ + devm_kfree(dev, entry); + + return 0; +} + +static int gpio_of_helper_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct gpio_of_helper_info *info; + struct gpio_of_entry *entry; + struct device_node *pnode = pdev->dev.of_node; + struct device_node *cnode; + struct pinctrl *pinctrl; + int err; + + /* we only support OF */ + if (pnode == NULL) { + dev_err(&pdev->dev, "No platform of_node!\n"); + return -ENODEV; + } + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + /* special handling for probe defer */ + if (PTR_ERR(pinctrl) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_warn(&pdev->dev, + "pins are not configured from the driver\n"); + } + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (info == NULL) { + dev_err(&pdev->dev, "Failed to allocate info\n"); + err = -ENOMEM; + goto err_no_mem; + } + platform_set_drvdata(pdev, info); + info->pdev = pdev; + + idr_init(&info->idr); + + err = device_create_file(dev, &dev_attr_status); + if (err != 0) { + dev_err(dev, "Failed to create status sysfs attribute\n"); + goto err_no_sysfs; + } + + for_each_child_of_node(pnode, cnode) { + + entry = gpio_of_entry_create(info, cnode); + if (IS_ERR_OR_NULL(entry)) { + dev_err(dev, "Failed to create gpio entry\n"); + err = PTR_ERR(entry); + goto err_fail_entry; + } + } + + dev_info(&pdev->dev, "ready\n"); + + return 0; +err_fail_entry: + device_remove_file(&pdev->dev, &dev_attr_status); +err_no_sysfs: +err_no_mem: + return err; +} + +static int gpio_of_helper_remove(struct platform_device *pdev) +{ + struct gpio_of_helper_info *info = platform_get_drvdata(pdev); + struct gpio_of_entry *entry; + int id; + + dev_info(&pdev->dev, "removing\n"); + + device_remove_file(&pdev->dev, &dev_attr_status); + + id = 0; + idr_for_each_entry(&info->idr, entry, id) { + /* destroy each and every one */ + gpio_of_entry_destroy(entry); + } + + return 0; +} + +#ifdef CONFIG_PM +//#ifdef CONFIG_PM_RUNTIME +static int gpio_of_helper_runtime_suspend(struct device *dev) +{ + /* place holder */ + return 0; +} + +static int gpio_of_helper_runtime_resume(struct device *dev) +{ + /* place holder */ + return 0; +} +//#endif /* CONFIG_PM_RUNTIME */ + +static struct dev_pm_ops gpio_of_helper_pm_ops = { + SET_RUNTIME_PM_OPS(gpio_of_helper_runtime_suspend, + gpio_of_helper_runtime_resume, NULL) +}; +#define GPIO_OF_HELPER_PM_OPS (&gpio_of_helper_pm_ops) +#else +#define GPIO_OF_HELPER_PM_OPS NULL +#endif /* CONFIG_PM */ + +struct platform_driver gpio_of_helper_driver = { + .probe = gpio_of_helper_probe, + .remove = gpio_of_helper_remove, + .driver = { + .name = "gpio-of-helper", + .owner = THIS_MODULE, + .pm = GPIO_OF_HELPER_PM_OPS, + .of_match_table = gpio_of_helper_of_match, + }, +}; + +module_platform_driver(gpio_of_helper_driver); + +MODULE_AUTHOR("Pantelis Antoniou "); +MODULE_DESCRIPTION("GPIO OF Helper driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio-of-helper"); diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c index fbf6b1a..ec7aa6f 100644 --- a/drivers/gpio/gpiolib-sysfs.c +++ b/drivers/gpio/gpiolib-sysfs.c @@ -37,10 +37,10 @@ static DEFINE_MUTEX(sysfs_lock); /* * /sys/class/gpio/gpioN... only for GPIOs that are exported * /direction - * * MAY BE OMITTED if kernel won't allow direction changes * * is read/write as "in" or "out" * * may also be written as "high" or "low", initializing * output value as specified ("out" implies "low") + * * read-only if kernel won't allow direction changes * /value * * always readable, subject to hardware behavior * * may be writable, as zero/nonzero @@ -53,6 +53,8 @@ static DEFINE_MUTEX(sysfs_lock); * * is read/write as zero/nonzero * * also affects existing and subsequent "falling" and "rising" * /edge configuration + * /label + * * descriptor label */ static ssize_t direction_show(struct device *dev, @@ -83,7 +85,9 @@ static ssize_t direction_store(struct device *dev, mutex_lock(&data->mutex); - if (sysfs_streq(buf, "high")) + if (!data->direction_can_change) + status = -EPERM; + else if (sysfs_streq(buf, "high")) status = gpiod_direction_output_raw(desc, 1); else if (sysfs_streq(buf, "out") || sysfs_streq(buf, "low")) status = gpiod_direction_output_raw(desc, 0); @@ -362,6 +366,23 @@ static ssize_t active_low_store(struct device *dev, } static DEVICE_ATTR_RW(active_low); +static ssize_t label_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct gpiod_data *data = dev_get_drvdata(dev); + struct gpio_desc *desc = data->desc; + ssize_t status; + + mutex_lock(&data->mutex); + + status = sprintf(buf, "%s\n", desc->label); + + mutex_unlock(&data->mutex); + + return status; +} +static DEVICE_ATTR_RO(label); + static umode_t gpio_is_visible(struct kobject *kobj, struct attribute *attr, int n) { @@ -373,12 +394,15 @@ static umode_t gpio_is_visible(struct kobject *kobj, struct attribute *attr, if (attr == &dev_attr_direction.attr) { if (!show_direction) - mode = 0; + mode &= 0444; } else if (attr == &dev_attr_edge.attr) { if (gpiod_to_irq(desc) < 0) mode = 0; if (!show_direction && test_bit(FLAG_IS_OUT, &desc->flags)) mode = 0; + } else if (attr == &dev_attr_value.attr) { + if (!show_direction && !test_bit(FLAG_IS_OUT, &desc->flags)) + mode &= 0444; } return mode; @@ -389,6 +413,7 @@ static struct attribute *gpio_attrs[] = { &dev_attr_edge.attr, &dev_attr_value.attr, &dev_attr_active_low.attr, + &dev_attr_label.attr, NULL, }; @@ -402,6 +427,10 @@ static const struct attribute_group *gpio_groups[] = { NULL }; +/* bwlegh, a second device in the same file... get out of my namespace! */ +#define dev_attr_label dev_attr_chip_label +#define label_show chip_label_show + /* * /sys/class/gpio/gpiochipN/ * /base ... matching gpio_chip.base (N) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index bd44be1..dcda5a6 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2321,10 +2321,10 @@ static int gpiod_request_commit(struct gpio_desc *desc, const char *label) if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) { desc_set_label(desc, label ? : "?"); status = 0; - } else { - kfree_const(label); - status = -EBUSY; - goto done; +// } else { +// kfree_const(label); +// status = -EBUSY; +// goto done; } if (chip->request) { diff --git a/drivers/gpu/drm/etnaviv/Kconfig b/drivers/gpu/drm/etnaviv/Kconfig index 041a77e..9219a6c 100644 --- a/drivers/gpu/drm/etnaviv/Kconfig +++ b/drivers/gpu/drm/etnaviv/Kconfig @@ -2,7 +2,7 @@ config DRM_ETNAVIV tristate "ETNAVIV (DRM support for Vivante GPU IP cores)" depends on DRM - depends on ARCH_MXC || ARCH_DOVE || (ARM && COMPILE_TEST) + depends on ARCH_MXC || ARCH_DOVE || ARCH_OMAP2PLUS || (ARM && COMPILE_TEST) depends on MMU select SHMEM select SYNC_FILE diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index a52fea8..224f206 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -734,6 +734,13 @@ config STM32_DFSDM_ADC This driver can also be built as a module. If so, the module will be called stm32-dfsdm-adc. +config STMPE_ADC + tristate "STMicroelectronics STMPE ADC driver" + depends on OF && MFD_STMPE + help + Say yes here to build support for ST Microelectronics STMPE + built-in ADC block (stmpe811). + config STX104 tristate "Apex Embedded Systems STX104 driver" depends on PC104 && X86 diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index a6e6a0b..cba889c 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o obj-$(CONFIG_STM32_ADC) += stm32-adc.o obj-$(CONFIG_STM32_DFSDM_CORE) += stm32-dfsdm-core.o obj-$(CONFIG_STM32_DFSDM_ADC) += stm32-dfsdm-adc.o +obj-$(CONFIG_STMPE_ADC) += stmpe-adc.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o obj-$(CONFIG_TI_ADC084S021) += ti-adc084s021.o diff --git b/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c new file mode 100644 index 0000000..bea3f3c --- /dev/null +++ b/drivers/iio/adc/stmpe-adc.c @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * STMicroelectronics STMPE811 IIO ADC Driver + * + * 4 channel, 10/12-bit ADC + * + * Copyright (C) 2013-2018 Toradex AG + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STMPE_REG_INT_STA 0x0B +#define STMPE_REG_ADC_INT_EN 0x0E +#define STMPE_REG_ADC_INT_STA 0x0F + +#define STMPE_REG_ADC_CTRL1 0x20 +#define STMPE_REG_ADC_CTRL2 0x21 +#define STMPE_REG_ADC_CAPT 0x22 +#define STMPE_REG_ADC_DATA_CH(channel) (0x30 + 2 * (channel)) + +#define STMPE_REG_TEMP_CTRL 0x60 +#define STMPE_TEMP_CTRL_ENABLE BIT(0) +#define STMPE_TEMP_CTRL_ACQ BIT(1) +#define STMPE_TEMP_CTRL_THRES_EN BIT(3) +#define STMPE_START_ONE_TEMP_CONV (STMPE_TEMP_CTRL_ENABLE | \ + STMPE_TEMP_CTRL_ACQ | \ + STMPE_TEMP_CTRL_THRES_EN) +#define STMPE_REG_TEMP_DATA 0x61 +#define STMPE_REG_TEMP_TH 0x63 +#define STMPE_ADC_LAST_NR 7 +#define STMPE_TEMP_CHANNEL (STMPE_ADC_LAST_NR + 1) + +#define STMPE_ADC_CH(channel) ((1 << (channel)) & 0xff) + +#define STMPE_ADC_TIMEOUT msecs_to_jiffies(1000) + +struct stmpe_adc { + struct stmpe *stmpe; + struct clk *clk; + struct device *dev; + + /* We are allocating plus one for the temperature channel */ + struct iio_chan_spec stmpe_adc_iio_channels[STMPE_ADC_LAST_NR + 2]; + + struct completion completion; + + u8 channel; + u32 value; +}; + +static int stmpe_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct stmpe_adc *info = iio_priv(indio_dev); + long ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: + + mutex_lock(&indio_dev->mlock); + + info->channel = (u8)chan->channel; + + switch (chan->type) { + case IIO_VOLTAGE: + if (info->channel > STMPE_ADC_LAST_NR) { + mutex_unlock(&indio_dev->mlock); + return -EINVAL; + } + + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN, + STMPE_ADC_CH(info->channel)); + + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_CAPT, + STMPE_ADC_CH(info->channel)); + + *val = info->value; + break; + + case IIO_TEMP: + if (info->channel != STMPE_TEMP_CHANNEL) { + mutex_unlock(&indio_dev->mlock); + return -EINVAL; + } + + stmpe_reg_write(info->stmpe, STMPE_REG_TEMP_CTRL, + STMPE_START_ONE_TEMP_CONV); + break; + default: + mutex_unlock(&indio_dev->mlock); + return -EINVAL; + } + + ret = wait_for_completion_interruptible_timeout + (&info->completion, STMPE_ADC_TIMEOUT); + + if (ret <= 0) { + mutex_unlock(&indio_dev->mlock); + if (ret == 0) + return -ETIMEDOUT; + else + return ret; + } + + switch (chan->type) { + case IIO_VOLTAGE: + *val = info->value; + break; + + case IIO_TEMP: + /* + * absolute temp = +V3.3 * value /7.51 [K] + * scale to [milli °C] + */ + *val = ((449960l * info->value) / 1024l) - 273150; + break; + default: + break; + } + + mutex_unlock(&indio_dev->mlock); + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = 3300; + *val2 = info->stmpe->mod_12b ? 12 : 10; + return IIO_VAL_FRACTIONAL_LOG2; + + default: + break; + } + + return -EINVAL; +} + +static irqreturn_t stmpe_adc_isr(int irq, void *dev_id) +{ + struct stmpe_adc *info = (struct stmpe_adc *)dev_id; + u8 data[2]; + + if (info->channel > STMPE_TEMP_CHANNEL) + return IRQ_NONE; + + if (info->channel <= STMPE_ADC_LAST_NR) { + int int_sta; + + int_sta = stmpe_reg_read(info->stmpe, STMPE_REG_ADC_INT_STA); + + /* Is the interrupt relevant */ + if (!(int_sta & STMPE_ADC_CH(info->channel))) + return IRQ_NONE; + + /* Read value */ + stmpe_block_read(info->stmpe, + STMPE_REG_ADC_DATA_CH(info->channel), 2, data); + + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA, int_sta); + } else if (info->channel == STMPE_TEMP_CHANNEL) { + /* Read value */ + stmpe_block_read(info->stmpe, STMPE_REG_TEMP_DATA, 2, data); + } + + info->value = ((u32)data[0] << 8) + data[1]; + complete(&info->completion); + + return IRQ_HANDLED; +} + +static const struct iio_info stmpe_adc_iio_info = { + .read_raw = &stmpe_read_raw, +}; + +static void stmpe_adc_voltage_chan(struct iio_chan_spec *ics, int chan) +{ + ics->type = IIO_VOLTAGE; + ics->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); + ics->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE); + ics->indexed = 1; + ics->channel = chan; +} + +static void stmpe_adc_temp_chan(struct iio_chan_spec *ics, int chan) +{ + ics->type = IIO_TEMP; + ics->info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED); + ics->indexed = 1; + ics->channel = chan; +} + +static int stmpe_adc_init_hw(struct stmpe_adc *adc) +{ + struct stmpe *stmpe = adc->stmpe; + + /* use temp irq for each conversion completion */ + stmpe_reg_write(stmpe, STMPE_REG_TEMP_TH, 0); + stmpe_reg_write(stmpe, STMPE_REG_TEMP_TH + 1, 0); + + return 0; +} + +static int stmpe_adc_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = NULL; + struct stmpe_adc *info = NULL; + struct device_node *np; + u32 norequest_mask = 0; + int irq_temp, irq_adc; + int num_chan = 0; + int i = 0; + int ret; + + irq_adc = platform_get_irq_byname(pdev, "STMPE_ADC"); + if (irq_adc < 0) + return irq_adc; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct stmpe_adc)); + if (!indio_dev) { + dev_err(&pdev->dev, "failed allocating iio device\n"); + return -ENOMEM; + } + + info = iio_priv(indio_dev); + + init_completion(&info->completion); + ret = devm_request_threaded_irq(&pdev->dev, irq_adc, NULL, + stmpe_adc_isr, IRQF_ONESHOT, + "stmpe-adc", info); + if (ret < 0) { + dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", + irq_adc); + return ret; + } + + irq_temp = platform_get_irq_byname(pdev, "STMPE_TEMP_SENS"); + if (irq_temp >= 0) { + ret = devm_request_threaded_irq(&pdev->dev, irq_temp, NULL, + stmpe_adc_isr, IRQF_ONESHOT, + "stmpe-adc", info); + if (ret < 0) + dev_warn(&pdev->dev, "failed requesting irq for" + " temp sensor, irq = %d\n", irq_temp); + } + + platform_set_drvdata(pdev, indio_dev); + + indio_dev->name = dev_name(&pdev->dev); + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &stmpe_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + info->stmpe = dev_get_drvdata(pdev->dev.parent); + + np = pdev->dev.of_node; + + if (!np) + dev_err(&pdev->dev, "no device tree node found\n"); + + of_property_read_u32(np, "st,norequest-mask", &norequest_mask); + + for_each_clear_bit(i, (unsigned long *) &norequest_mask, + (STMPE_ADC_LAST_NR + 1)) { + stmpe_adc_voltage_chan(&info->stmpe_adc_iio_channels[num_chan], i); + num_chan++; + } + stmpe_adc_temp_chan(&info->stmpe_adc_iio_channels[num_chan], i); + num_chan++; + indio_dev->channels = info->stmpe_adc_iio_channels; + indio_dev->num_channels = num_chan; + + ret = stmpe_adc_init_hw(info); + if (ret) + return ret; + + return iio_device_register(indio_dev); +} + +static int stmpe_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct stmpe_adc *info = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + stmpe_disable(info->stmpe, STMPE_BLOCK_ADC); + + return 0; +} + +static int __maybe_unused stmpe_adc_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct stmpe_adc *info = iio_priv(indio_dev); + + stmpe_adc_init_hw(info); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(stmpe_adc_pm_ops, NULL, stmpe_adc_resume); + +static struct platform_driver stmpe_adc_driver = { + .probe = stmpe_adc_probe, + .remove = stmpe_adc_remove, + .driver = { + .name = "stmpe-adc", + .pm = &stmpe_adc_pm_ops, + }, +}; + +module_platform_driver(stmpe_adc_driver); + +MODULE_AUTHOR("Stefan Agner "); +MODULE_DESCRIPTION("STMPEXXX ADC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:stmpe-adc"); diff --git a/drivers/input/misc/tps65218-pwrbutton.c b/drivers/input/misc/tps65218-pwrbutton.c index a4455bb..b6d4321 100644 --- a/drivers/input/misc/tps65218-pwrbutton.c +++ b/drivers/input/misc/tps65218-pwrbutton.c @@ -36,7 +36,7 @@ struct tps6521x_data { static const struct tps6521x_data tps65217_data = { .reg_status = TPS65217_REG_STATUS, .pb_mask = TPS65217_STATUS_PB, - .name = "tps65217_pwrbutton", + .name = "tps65217_pwr_but", }; static const struct tps6521x_data tps65218_data = { diff --git a/drivers/input/touchscreen/ar1021_i2c.c b/drivers/input/touchscreen/ar1021_i2c.c index b35b640..a1d4019 100644 --- a/drivers/input/touchscreen/ar1021_i2c.c +++ b/drivers/input/touchscreen/ar1021_i2c.c @@ -18,6 +18,11 @@ #define AR1021_MAX_X 4095 #define AR1021_MAX_Y 4095 +#define AR1021_MAX_PRESSURE 255 + +#define AR1021_CMD 0x55 + +#define AR1021_CMD_ENABLE_TOUCH 0x12 #define AR1021_CMD 0x55 @@ -27,8 +32,29 @@ struct ar1021_i2c { struct i2c_client *client; struct input_dev *input; u8 data[AR1021_TOCUH_PKG_SIZE]; + bool invert_x; + bool invert_y; + bool swap_xy; }; +static bool ar1021_get_prop_u32(struct device *dev, + const char *property, + unsigned int default_value, + unsigned int *value) +{ + u32 val; + int error; + + error = device_property_read_u32(dev, property, &val); + if (error) { + *value = default_value; + return false; + } + + *value = val; + return true; +} + static irqreturn_t ar1021_i2c_irq(int irq, void *dev_id) { struct ar1021_i2c *ar1021 = dev_id; @@ -50,9 +76,22 @@ static irqreturn_t ar1021_i2c_irq(int irq, void *dev_id) x = ((data[2] & 0x1f) << 7) | (data[1] & 0x7f); y = ((data[4] & 0x1f) << 7) | (data[3] & 0x7f); - input_report_abs(input, ABS_X, x); - input_report_abs(input, ABS_Y, y); + if (ar1021->invert_x) + x = AR1021_MAX_X - x; + + if (ar1021->invert_y) + y = AR1021_MAX_Y - y; + + if (ar1021->swap_xy) { + input_report_abs(input, ABS_X, y); + input_report_abs(input, ABS_Y, x); + } else { + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + } + input_report_key(input, BTN_TOUCH, button); + input_report_abs(input, ABS_PRESSURE, AR1021_MAX_PRESSURE); input_sync(input); out: @@ -94,6 +133,8 @@ static int ar1021_i2c_probe(struct i2c_client *client, struct ar1021_i2c *ar1021; struct input_dev *input; int error; + unsigned int offset_x, offset_y; + bool data_present; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { dev_err(&client->dev, "i2c_check_functionality error\n"); @@ -117,10 +158,44 @@ static int ar1021_i2c_probe(struct i2c_client *client, input->open = ar1021_i2c_open; input->close = ar1021_i2c_close; + ar1021->invert_x = device_property_read_bool(&client->dev, "touchscreen-inverted-x"); + ar1021->invert_y = device_property_read_bool(&client->dev, "touchscreen-inverted-y"); + ar1021->swap_xy = device_property_read_bool(&client->dev, "touchscreen-swapped-x-y"); + + data_present = ar1021_get_prop_u32(&client->dev, + "touchscreen-offset-x", + 0, + &offset_x); + + if (data_present) + dev_info(&client->dev, "touchscreen-offset-x: %d\n", offset_x); + + data_present = ar1021_get_prop_u32(&client->dev, + "touchscreen-offset-y", + 0, + &offset_y); + + if (data_present) + dev_info(&client->dev, "touchscreen-offset-y: %d\n", offset_y); + __set_bit(INPUT_PROP_DIRECT, input->propbit); - input_set_capability(input, EV_KEY, BTN_TOUCH); - input_set_abs_params(input, ABS_X, 0, AR1021_MAX_X, 0, 0); - input_set_abs_params(input, ABS_Y, 0, AR1021_MAX_Y, 0, 0); + //input_set_capability(input, EV_KEY, BTN_TOUCH); + + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + if(ar1021->swap_xy) + { + input_set_abs_params(input, ABS_X, 0, AR1021_MAX_Y, 0, 0); + input_set_abs_params(input, ABS_Y, 0, AR1021_MAX_X, 0, 0); + } + else + { + input_set_abs_params(input, ABS_X, offset_x, AR1021_MAX_X-offset_x, 0, 0); + input_set_abs_params(input, ABS_Y, offset_y, AR1021_MAX_Y-offset_y, 0, 0); + } + + input_set_abs_params(input, ABS_PRESSURE, 0, AR1021_MAX_PRESSURE, 0, 0); input_set_drvdata(input, ar1021); diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c index 2a78e27..81aa313 100644 --- a/drivers/input/touchscreen/stmpe-ts.c +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -30,8 +30,6 @@ * with touchscreen controller */ #define STMPE_REG_INT_STA 0x0B -#define STMPE_REG_ADC_CTRL1 0x20 -#define STMPE_REG_ADC_CTRL2 0x21 #define STMPE_REG_TSC_CTRL 0x40 #define STMPE_REG_TSC_CFG 0x41 #define STMPE_REG_FIFO_TH 0x4A @@ -49,17 +47,6 @@ #define STMPE_IRQ_TOUCH_DET 0 -#define SAMPLE_TIME(x) ((x & 0xf) << 4) -#define MOD_12B(x) ((x & 0x1) << 3) -#define REF_SEL(x) ((x & 0x1) << 1) -#define ADC_FREQ(x) (x & 0x3) -#define AVE_CTRL(x) ((x & 0x3) << 6) -#define DET_DELAY(x) ((x & 0x7) << 3) -#define SETTLING(x) (x & 0x7) -#define FRACTION_Z(x) (x & 0x7) -#define I_DRIVE(x) (x & 0x1) -#define OP_MODE(x) ((x & 0x7) << 1) - #define STMPE_TS_NAME "stmpe-ts" #define XY_MASK 0xfff @@ -69,15 +56,6 @@ * @idev: registered input device * @work: a work item used to scan the device * @dev: a pointer back to the MFD cell struct device* - * @sample_time: ADC converstion time in number of clock. - * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, - * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), - * recommended is 4. - * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) - * @ref_sel: ADC reference source - * (0 -> internal reference, 1 -> external reference) - * @adc_freq: ADC Clock speed - * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) * @ave_ctrl: Sample average control * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) * @touch_det_delay: Touch detect interrupt delay @@ -99,10 +77,6 @@ struct stmpe_touch { struct input_dev *idev; struct delayed_work work; struct device *dev; - u8 sample_time; - u8 mod_12b; - u8 ref_sel; - u8 adc_freq; u8 ave_ctrl; u8 touch_det_delay; u8 settling; @@ -187,7 +161,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) input_report_key(ts->idev, BTN_TOUCH, 1); input_sync(ts->idev); - /* flush the FIFO after we have read out our values. */ + /* flush the FIFO after we have read out our values. */ __stmpe_reset_fifo(ts->stmpe); /* reenable the tsc */ @@ -213,27 +187,31 @@ static int stmpe_init_hw(struct stmpe_touch *ts) return ret; } - adc_ctrl1 = SAMPLE_TIME(ts->sample_time) | MOD_12B(ts->mod_12b) | - REF_SEL(ts->ref_sel); - adc_ctrl1_mask = SAMPLE_TIME(0xff) | MOD_12B(0xff) | REF_SEL(0xff); + adc_ctrl1 = STMPE_SAMPLE_TIME(stmpe->sample_time) | + STMPE_MOD_12B(stmpe->mod_12b) | + STMPE_REF_SEL(stmpe->ref_sel); + adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) | + STMPE_REF_SEL(0xff); - ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL1, + ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL1, adc_ctrl1_mask, adc_ctrl1); if (ret) { dev_err(dev, "Could not setup ADC\n"); return ret; } - ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL2, - ADC_FREQ(0xff), ADC_FREQ(ts->adc_freq)); + ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL2, + STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(stmpe->adc_freq)); if (ret) { dev_err(dev, "Could not setup ADC\n"); return ret; } - tsc_cfg = AVE_CTRL(ts->ave_ctrl) | DET_DELAY(ts->touch_det_delay) | - SETTLING(ts->settling); - tsc_cfg_mask = AVE_CTRL(0xff) | DET_DELAY(0xff) | SETTLING(0xff); + tsc_cfg = STMPE_AVE_CTRL(ts->ave_ctrl) | + STMPE_DET_DELAY(ts->touch_det_delay) | + STMPE_SETTLING(ts->settling); + tsc_cfg_mask = STMPE_AVE_CTRL(0xff) | STMPE_DET_DELAY(0xff) | + STMPE_SETTLING(0xff); ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CFG, tsc_cfg_mask, tsc_cfg); if (ret) { @@ -242,14 +220,14 @@ static int stmpe_init_hw(struct stmpe_touch *ts) } ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_FRACTION_Z, - FRACTION_Z(0xff), FRACTION_Z(ts->fraction_z)); + STMPE_FRACTION_Z(0xff), STMPE_FRACTION_Z(ts->fraction_z)); if (ret) { dev_err(dev, "Could not config touch\n"); return ret; } ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_I_DRIVE, - I_DRIVE(0xff), I_DRIVE(ts->i_drive)); + STMPE_I_DRIVE(0xff), STMPE_I_DRIVE(ts->i_drive)); if (ret) { dev_err(dev, "Could not config touch\n"); return ret; @@ -263,7 +241,7 @@ static int stmpe_init_hw(struct stmpe_touch *ts) } ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CTRL, - OP_MODE(0xff), OP_MODE(OP_MOD_XYZ)); + STMPE_OP_MODE(0xff), STMPE_OP_MODE(OP_MOD_XYZ)); if (ret) { dev_err(dev, "Could not set mode\n"); return ret; @@ -303,13 +281,13 @@ static void stmpe_ts_get_platform_info(struct platform_device *pdev, if (np) { if (!of_property_read_u32(np, "st,sample-time", &val)) - ts->sample_time = val; + ts->stmpe->sample_time = val; if (!of_property_read_u32(np, "st,mod-12b", &val)) - ts->mod_12b = val; + ts->stmpe->mod_12b = val; if (!of_property_read_u32(np, "st,ref-sel", &val)) - ts->ref_sel = val; + ts->stmpe->ref_sel = val; if (!of_property_read_u32(np, "st,adc-freq", &val)) - ts->adc_freq = val; + ts->stmpe->adc_freq = val; if (!of_property_read_u32(np, "st,ave-ctrl", &val)) ts->ave_ctrl = val; if (!of_property_read_u32(np, "st,touch-det-delay", &val)) diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index 9e8684a..d921c35 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -34,6 +34,7 @@ #define ADCFSM_STEPID 0x10 #define SEQ_SETTLE 275 #define MAX_12BIT ((1 << 12) - 1) +#define PRESSURE_MAX 1000 #define TSC_IRQENB_MASK (IRQENB_FIFO0THRES | IRQENB_EOS | IRQENB_HW_PEN) @@ -234,6 +235,7 @@ static void titsc_read_coordinates(struct titsc *ts_dev, for (i = 0; i < creads; i++) { xvals[i] = titsc_readl(ts_dev, REG_FIFO0); xvals[i] &= 0xfff; + pr_debug("i %d xval %d yval %d z1 %d z2 %d\n", i, xvals[i], yvals[i], *z1, *z2); } /* @@ -312,13 +314,13 @@ static irqreturn_t titsc_irq(int irq, void *dev) * Resistance(touch) = x plate resistance * * x postion/4096 * ((z2 / z1) - 1) */ - z = z1 - z2; + z = z2 - z1; z *= x; z *= ts_dev->x_plate_resistance; - z /= z2; + z /= z1; z = (z + 2047) >> 12; - - if (z <= MAX_12BIT) { + pr_debug("x %d y %d z1 %d z2 %d z %d\n", x, y, z1, z2, z); + if (z <= PRESSURE_MAX) { input_report_abs(input_dev, ABS_X, x); input_report_abs(input_dev, ABS_Y, y); input_report_abs(input_dev, ABS_PRESSURE, z); @@ -459,6 +461,7 @@ static int titsc_probe(struct platform_device *pdev) input_dev->name = "ti-tsc"; input_dev->dev.parent = &pdev->dev; + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 8c5dfdc..bba159e 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1204,7 +1204,7 @@ config MFD_STMPE Currently supported devices are: - STMPE811: GPIO, Touchscreen + STMPE811: GPIO, Touchscreen, ADC STMPE1601: GPIO, Keypad STMPE1801: GPIO, Keypad STMPE2401: GPIO, Keypad @@ -1217,6 +1217,7 @@ config MFD_STMPE GPIO: stmpe-gpio Keypad: stmpe-keypad Touchscreen: stmpe-ts + ADC: stmpe-adc menu "STMicroelectronics STMPE Interface Drivers" depends on MFD_STMPE diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 566caca..35390d1 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -463,6 +463,28 @@ static const struct mfd_cell stmpe_ts_cell = { .num_resources = ARRAY_SIZE(stmpe_ts_resources), }; +/* + * ADC (STMPE811) + */ + +static struct resource stmpe_adc_resources[] = { + { + .name = "STMPE_TEMP_SENS", + .flags = IORESOURCE_IRQ, + }, + { + .name = "STMPE_ADC", + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct mfd_cell stmpe_adc_cell = { + .name = "stmpe-adc", + .of_compatible = "st,stmpe-adc", + .resources = stmpe_adc_resources, + .num_resources = ARRAY_SIZE(stmpe_adc_resources), +}; + /* * STMPE811 or STMPE610 */ @@ -497,6 +519,11 @@ static struct stmpe_variant_block stmpe811_blocks[] = { .irq = STMPE811_IRQ_TOUCH_DET, .block = STMPE_BLOCK_TOUCHSCREEN, }, + { + .cell = &stmpe_adc_cell, + .irq = STMPE811_IRQ_TEMP_SENS, + .block = STMPE_BLOCK_ADC, + }, }; static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks, @@ -517,6 +544,44 @@ static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks, enable ? 0 : mask); } +static int stmpe811_init_adc(struct stmpe *stmpe) +{ + int ret; + u8 adc_ctrl1, adc_ctrl1_mask; + + ret = stmpe_enable(stmpe, STMPE_BLOCK_ADC); + if (ret) { + dev_err(stmpe->dev, "Could not enable clock for ADC\n"); + goto err_adc; + } + + adc_ctrl1 = STMPE_SAMPLE_TIME(stmpe->sample_time) | + STMPE_MOD_12B(stmpe->mod_12b) | + STMPE_REF_SEL(stmpe->ref_sel); + adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) | + STMPE_REF_SEL(0xff); + + ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL1, + adc_ctrl1_mask, adc_ctrl1); + if (ret) { + dev_err(stmpe->dev, "Could not setup ADC\n"); + goto err_adc; + } + + ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL2, + STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(stmpe->adc_freq)); + if (ret) { + dev_err(stmpe->dev, "Could not setup ADC\n"); + goto err_adc; + } + + return 0; +err_adc: + stmpe_disable(stmpe, STMPE_BLOCK_ADC); + + return ret; +} + static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) { /* 0 for touchscreen, 1 for GPIO */ @@ -1235,6 +1300,12 @@ static int stmpe_chip_init(struct stmpe *stmpe) return ret; } + if (id == STMPE811_ID) { + ret = stmpe811_init_adc(stmpe); + if (ret) + return ret; + } + return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr); } @@ -1325,6 +1396,7 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum) struct device_node *np = ci->dev->of_node; struct stmpe *stmpe; int ret; + u32 val; pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -1342,6 +1414,15 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum) mutex_init(&stmpe->irq_lock); mutex_init(&stmpe->lock); + if (!of_property_read_u32(np, "st,sample-time", &val)) + stmpe->sample_time = val; + if (!of_property_read_u32(np, "st,mod-12b", &val)) + stmpe->mod_12b = val; + if (!of_property_read_u32(np, "st,ref-sel", &val)) + stmpe->ref_sel = val; + if (!of_property_read_u32(np, "st,adc-freq", &val)) + stmpe->adc_freq = val; + stmpe->dev = ci->dev; stmpe->client = ci->client; stmpe->pdata = pdata; diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 3726eac..655247d 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -513,6 +513,24 @@ config MISC_RTSX tristate default MISC_RTSX_PCI || MISC_RTSX_USB +config TIEQEP + tristate "EQEP Hardware quadrature encoder controller" + depends on SOC_AM33XX + select PWM_TIPWMSS + help + Driver support for the EQEP quadrature encoder controller AM33XX + TI SOC + + To compile this driver as a module, choose M here: the module + will be called tieqep. + +config UDOO_ARD + tristate "UDOO-Arduino erase/reset Driver" + default y + help + This driver is used to erase and reset arduino board via command sent + over USB-to-SERIAL connection. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" @@ -523,6 +541,7 @@ source "drivers/misc/mei/Kconfig" source "drivers/misc/vmw_vmci/Kconfig" source "drivers/misc/mic/Kconfig" source "drivers/misc/genwqe/Kconfig" +source "drivers/misc/cape/Kconfig" source "drivers/misc/echo/Kconfig" source "drivers/misc/cxl/Kconfig" source "drivers/misc/ocxl/Kconfig" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index af22bbc..2698bab 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -43,6 +43,7 @@ obj-y += ti-st/ obj-y += lis3lv02d/ obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/ +obj-$(CONFIG_TIEQEP) += tieqep.o obj-$(CONFIG_INTEL_MEI) += mei/ obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/ obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o @@ -50,9 +51,11 @@ obj-$(CONFIG_SRAM) += sram.o obj-$(CONFIG_SRAM_EXEC) += sram-exec.o obj-y += mic/ obj-$(CONFIG_GENWQE) += genwqe/ +obj-y += cape/ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o obj-$(CONFIG_CXL_BASE) += cxl/ +obj-$(CONFIG_UDOO_ARD) += udoo_ard.o obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o diff --git b/drivers/misc/cape/Kconfig b/drivers/misc/cape/Kconfig new file mode 100644 index 0000000..a2ef85e --- /dev/null +++ b/drivers/misc/cape/Kconfig @@ -0,0 +1,5 @@ +# +# Capes +# + +source "drivers/misc/cape/beaglebone/Kconfig" diff --git b/drivers/misc/cape/Makefile b/drivers/misc/cape/Makefile new file mode 100644 index 0000000..7c4eb96 --- /dev/null +++ b/drivers/misc/cape/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for cape like devices +# + +obj-y += beaglebone/ diff --git b/drivers/misc/cape/beaglebone/Kconfig b/drivers/misc/cape/beaglebone/Kconfig new file mode 100644 index 0000000..eeb6782 --- /dev/null +++ b/drivers/misc/cape/beaglebone/Kconfig @@ -0,0 +1,10 @@ +# +# Beaglebone capes +# + +config BEAGLEBONE_PINMUX_HELPER + tristate "Beaglebone Pinmux Helper" + depends on ARCH_OMAP2PLUS && OF + default n + help + Say Y here to include support for the pinmux helper diff --git b/drivers/misc/cape/beaglebone/Makefile b/drivers/misc/cape/beaglebone/Makefile new file mode 100644 index 0000000..7f4617a --- /dev/null +++ b/drivers/misc/cape/beaglebone/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for beaglebone capes +# + +obj-$(CONFIG_BEAGLEBONE_PINMUX_HELPER) += bone-pinmux-helper.o diff --git b/drivers/misc/cape/beaglebone/bone-pinmux-helper.c b/drivers/misc/cape/beaglebone/bone-pinmux-helper.c new file mode 100644 index 0000000..d81363a --- /dev/null +++ b/drivers/misc/cape/beaglebone/bone-pinmux-helper.c @@ -0,0 +1,242 @@ +/* + * Pinmux helper driver + * + * Copyright (C) 2013 Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct of_device_id bone_pinmux_helper_of_match[] = { + { + .compatible = "bone-pinmux-helper", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, bone_pinmux_helper_of_match); + +struct pinmux_helper_data { + struct pinctrl *pinctrl; + char *selected_state_name; +}; + +static ssize_t pinmux_helper_show_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pinmux_helper_data *data = platform_get_drvdata(pdev); + const char *name; + + name = data->selected_state_name; + if (name == NULL || strlen(name) == 0) + name = "none"; + return sprintf(buf, "%s\n", name); +} + +static ssize_t pinmux_helper_store_state(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pinmux_helper_data *data = platform_get_drvdata(pdev); + struct pinctrl_state *state; + char *state_name; + char *s; + int err; + + /* duplicate (as a null terminated string) */ + state_name = kmalloc(count + 1, GFP_KERNEL); + if (state_name == NULL) + return -ENOMEM; + memcpy(state_name, buf, count); + state_name[count] = '\0'; + + /* and chop off newline */ + s = strchr(state_name, '\n'); + if (s != NULL) + *s = '\0'; + + /* try to select default state at first (if it exists) */ + state = pinctrl_lookup_state(data->pinctrl, state_name); + if (!IS_ERR(state)) { + err = pinctrl_select_state(data->pinctrl, state); + if (err != 0) + dev_err(dev, "Failed to select state %s\n", + state_name); + } else { + dev_err(dev, "Failed to find state %s\n", state_name); + err = PTR_RET(state); + } + + if (err == 0) { + kfree(data->selected_state_name); + data->selected_state_name = state_name; + } + + return err ? err : count; +} + +static DEVICE_ATTR(state, S_IWUSR | S_IRUGO, + pinmux_helper_show_state, pinmux_helper_store_state); + +static struct attribute *pinmux_helper_attributes[] = { + &dev_attr_state.attr, + NULL +}; + +static const struct attribute_group pinmux_helper_attr_group = { + .attrs = pinmux_helper_attributes, +}; + +static int bone_pinmux_helper_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct pinmux_helper_data *data; + struct pinctrl_state *state; + char *state_name; + const char *mode_name; + int mode_len; + int err; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) { + dev_err(dev, "Failed to allocate data\n"); + err = -ENOMEM; + goto err_no_mem; + } + + state_name = kmalloc(strlen(PINCTRL_STATE_DEFAULT) + 1, + GFP_KERNEL); + if (state_name == NULL) { + dev_err(dev, "Failed to allocate state name\n"); + err = -ENOMEM; + goto err_no_state_mem; + } + data->selected_state_name = state_name; + strcpy(data->selected_state_name, PINCTRL_STATE_DEFAULT); + + platform_set_drvdata(pdev, data); + + data->pinctrl = devm_pinctrl_get(dev); + if (IS_ERR(data->pinctrl)) { + dev_err(dev, "Failed to get pinctrl\n"); + err = PTR_RET(data->pinctrl); + goto err_no_pinctrl; + } + + /* See if an initial mode is specified in the device tree */ + mode_name = of_get_property(dev->of_node, "mode", &mode_len); + + err = -1; + if (mode_name != NULL ) { + state_name = kmalloc(mode_len + 1, GFP_KERNEL); + if (state_name == NULL) { + dev_err(dev, "Failed to allocate state name\n"); + err = -ENOMEM; + goto err_no_mode_mem; + } + strncpy(state_name, mode_name, mode_len); + + /* try to select requested mode */ + state = pinctrl_lookup_state(data->pinctrl, state_name); + if (!IS_ERR(state)) { + err = pinctrl_select_state(data->pinctrl, state); + if (err != 0) { + dev_warn(dev, "Unable to select requested mode %s\n", state_name); + kfree(state_name); + } else { + kfree(data->selected_state_name); + data->selected_state_name = state_name; + dev_notice(dev, "Set initial pinmux mode to %s\n", state_name); + } + } + } + + /* try to select default state if mode_name failed */ + if ( err != 0) { + state = pinctrl_lookup_state(data->pinctrl, + data->selected_state_name); + if (!IS_ERR(state)) { + err = pinctrl_select_state(data->pinctrl, state); + if (err != 0) { + dev_err(dev, "Failed to select default state\n"); + goto err_no_state; + } + } else { + data->selected_state_name = '\0'; + } + } + + /* Register sysfs hooks */ + err = sysfs_create_group(&dev->kobj, &pinmux_helper_attr_group); + if (err) { + dev_err(dev, "Failed to create sysfs group\n"); + goto err_no_sysfs; + } + + return 0; + +err_no_sysfs: +err_no_state: +err_no_mode_mem: + devm_pinctrl_put(data->pinctrl); +err_no_pinctrl: + devm_kfree(dev, data->selected_state_name); +err_no_state_mem: + devm_kfree(dev, data); +err_no_mem: + return err; +} + +static int bone_pinmux_helper_remove(struct platform_device *pdev) +{ + struct pinmux_helper_data *data = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + + sysfs_remove_group(&dev->kobj, &pinmux_helper_attr_group); + kfree(data->selected_state_name); + devm_pinctrl_put(data->pinctrl); + devm_kfree(dev, data); + + return 0; +} + +struct platform_driver bone_pinmux_helper_driver = { + .probe = bone_pinmux_helper_probe, + .remove = bone_pinmux_helper_remove, + .driver = { + .name = "bone-pinmux-helper", + .owner = THIS_MODULE, + .of_match_table = bone_pinmux_helper_of_match, + }, +}; + +module_platform_driver(bone_pinmux_helper_driver); + +MODULE_AUTHOR("Pantelis Antoniou"); +MODULE_DESCRIPTION("Beaglebone pinmux helper driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bone-pinmux-helper"); diff --git b/drivers/misc/tieqep.c b/drivers/misc/tieqep.c new file mode 100644 index 0000000..bb69ad4 --- /dev/null +++ b/drivers/misc/tieqep.c @@ -0,0 +1,754 @@ +/* + * TI eQEP driver for AM33xx devices + * + * Copyright (C) 2013 Nathaniel R. Lewis - http://teknoman117.wordpress.com/ + * Copyright (C) 2015 SoftPLC Corporation, Dick Hollenbeck + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * sysfs entries + * - position = absolute - current position; relative - last latched value + * - mode => 0 - absolute; 1 - relative + * - period => sampling period for the hardware + * - enable => 0 - eQEP disabled, 1 - eQEP enabled + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* eQEP register offsets from its base IO address */ +#define QPOSCNT 0x0000 +#define QPOSINIT 0x0004 +#define QPOSMAX 0x0008 +#define QPOSCMP 0x000C +#define QPOSILAT 0x0010 +#define QPOSSLAT 0x0014 +#define QPOSLAT 0x0018 +#define QUTMR 0x001C +#define QUPRD 0x0020 +#define QWDTMR 0x0024 +#define QWDPRD 0x0026 +#define QDECCTL 0x0028 +#define QEPCTL 0x002A +#define QCAPCTL 0x002C +#define QPOSCTL 0x002E +#define QEINT 0x0030 +#define QFLG 0x0032 +#define QCLR 0x0034 +#define QFRC 0x0036 +#define QEPSTS 0x0038 +#define QCTMR 0x003A +#define QCPRD 0x003C +#define QCTMRLAT 0x003E +#define QCPRDLAT 0x0040 +#define QREVID 0x005C + +#if 0 /* if you wanted another way to modify IP registers... */ +typedef volatile u32 REG32; +typedef volatile u16 REG16; +struct EQEP_REGS { + REG32 q_poscnt; /* 0x00 position counter */ + REG32 q_posinit; /* 0x04 position counter initialization */ + REG32 q_posmax; /* 0x08 maximum position count */ + REG32 q_poscmp; /* 0x0C position compare */ + REG32 q_posilat; /* 0x10 index position latch */ + REG32 q_posslat; /* 0x14 strobe position latch */ + REG32 q_poslat; /* 0x18 position counter latch */ + REG32 q_utmr; /* 0x1C unit timer */ + REG32 q_uprd; /* 0x20 unit period */ + REG16 q_wdtmr; /* 0x24 watchdog timer */ + REG16 q_wdprd; /* 0x26 watchdog period */ + REG16 q_decctl; /* 0x28 decoder control */ + REG16 q_epctl; /* 0x2A control register */ + REG16 q_capctl; /* 0x2C capture control */ + REG16 q_posctl; /* 0x2E position compare control */ + REG16 q_eint; /* 0x30 interrupt enable */ + REG16 q_flg; /* 0x32 interrupt flag */ + REG16 q_clr; /* 0x34 interrupt clear */ + REG16 q_frc; /* 0x36 interrupt force */ + REG16 q_epsts; /* 0x38 status */ + REG16 q_ctmr; /* 0x3A capture timer */ + REG16 q_cprd; /* 0x3C capture period */ + REG16 q_ctmrlat; /* 0x3E capture timer latch */ + REG16 q_prdlat; /* 0x40 capture period latch */ + char q_fill1[0x5c-0x40]; + REG32 q_revid; /* 0x5C revision id */ +}; +#endif + + +/* Bits for the QDECTL register */ +#define QSRC1 (1 << 15) +#define QSRC0 (1 << 14) +#define SOEN (1 << 13) +#define SPSEL (1 << 12) +#define XCR (1 << 11) +#define SWAP (1 << 10) +#define IGATE (1 << 9) +#define QAP (1 << 8) +#define QBP (1 << 7) +#define QIP (1 << 6) +#define QSP (1 << 5) + +/* Bits for the QEPCTL register */ +#define FREESOFT1 (1 << 15) +#define FREESOFT0 (1 << 14) +#define PCRM1 (1 << 13) +#define PCRM0 (1 << 12) +#define SEI1 (1 << 11) +#define SEI0 (1 << 10) +#define IEI1 (1 << 9) +#define IEI0 (1 << 8) +#define SWI (1 << 7) +#define SEL (1 << 6) +#define IEL1 (1 << 5) +#define IEL0 (1 << 4) +#define PHEN (1 << 3) +#define QCLM (1 << 2) +#define UTE (1 << 1) +#define WDE (1 << 0) + +/* Bits for the QCAPCTL register */ +#define CEN (1 << 15) +#define CCPS2 (1 << 6) +#define CCPS0 (1 << 5) +#define CCPS1 (1 << 4) +#define UPPS3 (1 << 3) +#define UPPS2 (1 << 2) +#define UPPS1 (1 << 1) +#define UPPS0 (1 << 0) + +/* Bits for the QPOSCTL register */ +#define PCSHDW (1 << 15) +#define PCLOAD (1 << 14) +#define PCPOL (1 << 13) +#define PCE (1 << 12) +#define PCSPW11 (1 << 11) +#define PCSPW10 (1 << 10) +#define PCSPW9 (1 << 9) +#define PCSPW8 (1 << 8) +#define PCSPW7 (1 << 7) +#define PCSPW6 (1 << 6) +#define PCSPW5 (1 << 5) +#define PCSPW4 (1 << 4) +#define PCSPW3 (1 << 3) +#define PCSPW2 (1 << 2) +#define PCSPW1 (1 << 1) +#define PCSPW0 (1 << 0) + +/* Bits for the interrupt registers */ +#define EQEP_INTERRUPT_MASK 0x0FFF +#define UTOF (1 << 11) + +/* Bits to control the clock in the PWMSS subsystem */ +#define PWMSS_EQEPCLK_EN BIT(4) +#define PWMSS_EQEPCLK_STOP_REQ BIT(5) +#define PWMSS_EQEPCLK_EN_ACK BIT(4) + +/* + * Modes for the eQEP unit + * Absolute - the position entry represents the current position of the encoder. + * Poll this value and it will be notified every period nanoseconds + * Relative - the position entry represents the last latched position of the encoder + * This value is latched every period nanoseconds and the internal counter + * is subsequenty reset + */ +#define TIEQEP_MODE_ABSOLUTE 0 +#define TIEQEP_MODE_RELATIVE 1 + +/* Structure defining the characteristics of the eQEP unit */ +struct eqep_chip +{ + /* Platform device for this eQEP unit */ + struct platform_device *pdev; + + /* Pointer to the base of the memory of the eQEP unit */ + void __iomem *mmio_base; + + /* SYSCLKOUT to the eQEP unit */ + u32 clk_rate; + + /* IRQ for the eQEP unit */ + u16 irq; + + /* Mode of the eQEP unit */ + u8 op_mode; + + /* work stuct for the notify userspace work */ + struct work_struct notify_work; + + /* Backup for driver suspension */ + u16 prior_qepctl; + u16 prior_qeint; +}; + +/* Notify userspace work */ +static void notify_handler(struct work_struct *work) +{ + /* Get a reference to the eQEP driver */ + struct eqep_chip *eqep = container_of(work, struct eqep_chip, notify_work); + + /* Notify the userspace */ + sysfs_notify(&eqep->pdev->dev.kobj, NULL, "position"); +} + +/* eQEP Interrupt handler */ +static irqreturn_t eqep_irq_handler(int irq, void *dev_id) +{ + /* Get the instance information */ + struct platform_device *pdev = dev_id; + struct eqep_chip *eqep = platform_get_drvdata(pdev); + + /* Get the interrupt flags */ + u16 iflags = readw(eqep->mmio_base + QFLG) & EQEP_INTERRUPT_MASK; + + /* Check the interrupt source(s) */ + if (iflags & UTOF) { + /* Handle the unit timer overflow interrupt by notifying any potential pollers */ + schedule_work(&eqep->notify_work); + } + + /* Clear interrupt flags (write back triggered flags to the clear register) */ + writew(iflags, eqep->mmio_base + QCLR); + + /* Return that the IRQ was handled successfully */ + return IRQ_HANDLED; +} + +/* Function to read whether the eQEP unit is enabled or disabled */ +static ssize_t eqep_get_enabled(struct device *dev, struct device_attribute *attr, char *buf) +{ + /* Get the instance structure */ + struct eqep_chip *eqep = dev_get_drvdata(dev); + u16 enabled = 0; + + /* Increment the device usage count and run pm_runtime_resume() */ + pm_runtime_get_sync(dev); + + /* Read the qep control register and mask all but the enabled bit */ + enabled = readw(eqep->mmio_base + QEPCTL) & PHEN; + + /* Return the target in string format */ + return sprintf(buf, "%u\n", (enabled) ? 1 : 0); +} + +/* Function to set if the eQEP is enabled */ +static ssize_t eqep_set_enabled(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + /* Get the instance structure */ + int rc; + u16 val; + u8 enabled; + struct eqep_chip *eqep = dev_get_drvdata(dev); + + /* Convert the input string to an 8 bit uint */ + if ((rc = kstrtou8(buf, 0, &enabled))) + return rc; + + /* Increment the device usage count and run pm_runtime_resume() */ + pm_runtime_get_sync(dev); + /* Get the existing state of QEPCTL */ + val = readw(eqep->mmio_base + QEPCTL); + + /* If we passed a number that is not 0, enable the eQEP */ + if (enabled) + /* Enable the eQEP (Set PHEN in QEPCTL) */ + val |= PHEN; + else + /* Disable the eQEP (Clear PHEN in QEPCTL) */ + val &= ~PHEN; + + /* Write flags back to control register */ + writew(val, eqep->mmio_base + QEPCTL); + + /* Return buffer length consumed (all) */ + return count; +} + +/* Function to read the current position of the eQEP */ +static ssize_t eqep_get_position(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct eqep_chip *eqep = dev_get_drvdata(dev); + + s32 position = 0; + /* Increment the device usage count and run pm_runtime_resume() */ + pm_runtime_get_sync(dev); + + if (eqep->op_mode == TIEQEP_MODE_ABSOLUTE) { + position = readl(eqep->mmio_base + QPOSCNT); + } else if (eqep->op_mode == TIEQEP_MODE_RELATIVE) { + /* in relative mode, use the last latched value of the eQEP hardware */ + position = readl(eqep->mmio_base + QPOSLAT); + dev_dbg(dev, "get_position:0x%08x\n", position); + } + + return sprintf(buf, "%d\n", position); +} + +/* Function to set the position of the eQEP hardware */ +static ssize_t eqep_set_position(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + int rc; + s32 position; + struct eqep_chip *eqep = dev_get_drvdata(dev); + + if ((rc = kstrtos32(buf, 0, &position))) + return rc; + + /* Increment the device usage count and run pm_runtime_resume() */ + pm_runtime_get_sync(dev); + /* + * If we are in absolute mode, set the position of the encoder, + * discard relative mode because thats pointless + */ + if (eqep->op_mode == TIEQEP_MODE_ABSOLUTE) { + /* If absolute mode, set the current value of the eQEP hardware */ + writel(position, eqep->mmio_base + QPOSCNT); + } + + /* Return buffer length consumed (all) */ + return count; +} + +/* Function to read the period of the unit time event timer */ +static ssize_t eqep_get_timer_period(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct eqep_chip *eqep = dev_get_drvdata(dev); + u64 period; + + /* Increment the device usage count and run pm_runtime_resume() */ + pm_runtime_get_sync(dev); + /* Convert from counts per interrupt back into period_ns */ + period = readl(eqep->mmio_base + QUPRD); + period = period * NSEC_PER_SEC; + do_div(period, eqep->clk_rate); + + /* Otherwise write out the data */ + return sprintf(buf, "%llu\n", period); +} + +/* Function to set the unit timer period. 0 = off, greater than zero sets the period */ +static ssize_t eqep_set_timer_period(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + int rc; + u16 tmp; + u64 period; + + struct eqep_chip *eqep = dev_get_drvdata(dev); + + if ((rc = kstrtou64(buf, 0, &period))) + return rc; + + /* Increment the device usage count and run pm_runtime_resume() */ + pm_runtime_get_sync(dev); + /* Disable the unit timer before modifying its period register */ + tmp = readw(eqep->mmio_base + QEPCTL); + tmp &= ~(UTE | QCLM); + writew(tmp, eqep->mmio_base + QEPCTL); + + /* Zero the unit timer counter register */ + writel(0, eqep->mmio_base + QUTMR); + + /* If the timer is enabled (a non-zero period has been passed) */ + if (period) { + /* update the period */ + period = period * eqep->clk_rate; + do_div(period, NSEC_PER_SEC); + + dev_dbg(dev, "eqep_set_timer_period:%llu\n", period); + + writel(period, eqep->mmio_base + QUPRD); + + /* Enable unit timer, and latch QPOSLAT to QPOSCNT on timer expiration */ + tmp |= UTE | QCLM; + writew(tmp, eqep->mmio_base + QEPCTL); + } + + return count; +} + +/* Function to read the mode of the eQEP hardware */ +static ssize_t eqep_get_mode(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct eqep_chip *eqep = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", eqep->op_mode); +} + +/* Function to set the mode of the eQEP hardware */ +static ssize_t eqep_set_mode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + int rc; + u16 val; + u8 tmp_mode; + struct eqep_chip *eqep = dev_get_drvdata(dev); + + if ((rc = kstrtou8(buf, 0, &tmp_mode))) + return rc; + + dev_dbg(dev, "eqep_set_mode:%d\n", tmp_mode); + + /* Increment the device usage count and run pm_runtime_resume() */ + pm_runtime_get_sync(dev); + val = readw(eqep->mmio_base + QEPCTL); + + if (tmp_mode == TIEQEP_MODE_ABSOLUTE) { + /* + * In absolute mode, don't reset the hardware based on time, + * so disable the unit timer position reset (Set PCRM[1:0] = 0) + */ + val &= ~(PCRM1 | PCRM0); + + eqep->op_mode = TIEQEP_MODE_ABSOLUTE; + } else if (tmp_mode == TIEQEP_MODE_RELATIVE) { + /* + * In relative mode, latch the value of the eQEP hardware on the + * overflow of the unit timer. So enable the unit timer position reset + * (Set PCRM[1:0] = 3) + */ + val |= PCRM1 | PCRM0; + + eqep->op_mode = TIEQEP_MODE_RELATIVE; + } + + writew(val, eqep->mmio_base + QEPCTL); + + return count; +} + +/* Bind read/write functions to sysfs entries */ +static DEVICE_ATTR(enabled, 0644, eqep_get_enabled, eqep_set_enabled); +static DEVICE_ATTR(position, 0644, eqep_get_position, eqep_set_position); +static DEVICE_ATTR(period, 0644, eqep_get_timer_period, eqep_set_timer_period); +static DEVICE_ATTR(mode, 0644, eqep_get_mode, eqep_set_mode); + +/* Array holding all of the sysfs entries */ +static const struct attribute *eqep_attrs[] = { + &dev_attr_enabled.attr, + &dev_attr_position.attr, + &dev_attr_period.attr, + &dev_attr_mode.attr, + NULL, +}; + +/* Driver function group */ +static const struct attribute_group eqep_device_attr_group = { + .attrs = (struct attribute **) eqep_attrs, +}; + +/* Driver compatibility list */ +static struct of_device_id eqep_of_match[] = +{ + { .compatible = "ti,am33xx-eqep" }, + { } +}; + +/* Register our compatibilities for device trees */ +MODULE_DEVICE_TABLE(of, eqep_of_match); + +/* Create an instance of the eQEP driver */ +static int eqep_probe(struct platform_device *pdev) +{ + struct resource *r; + struct clk *clk; + struct eqep_chip *eqep; + struct pinctrl *pinctrl; + + u64 period; + u16 status; + u32 value; + + dev_info(&pdev->dev, "ver. 1.0\n"); + + /* Select pins provided through the device tree */ + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + { + dev_warn(&pdev->dev, "unable to select pin group\n"); + } + + /* Allocate a eqep_driver object */ + eqep = devm_kzalloc(&pdev->dev, sizeof(struct eqep_chip), GFP_KERNEL); + if (!eqep) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + /* Get a handle to the system clock object */ + clk = devm_clk_get(pdev->dev.parent, "fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return PTR_ERR(clk); + } + + /* Get the frequency of the system clock */ + eqep->clk_rate = clk_get_rate(clk); + if (!eqep->clk_rate) { + dev_err(&pdev->dev, "failed to get clock rate\n"); + return -EINVAL; + } + + /* Get a resource containing the IRQ for this eQEP controller */ + r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (unlikely(!r)) { + dev_err(&pdev->dev, "Invalid IRQ resource\n"); + return -ENODEV; + } + + /* Store the irq */ + eqep->irq = r->start; + + /* Get a resource containing the requested (from DT) memory address and range of eQEP controller */ + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + /* Remap the eQEP controller memory into our own memory space */ + eqep->mmio_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(eqep->mmio_base)) + return PTR_ERR(eqep->mmio_base); + + /* Store the platform device in our eQEP data structure for later usage */ + eqep->pdev = pdev; + + /* Subscribe to the eQEP interrupt */ + if (request_irq(eqep->irq, eqep_irq_handler, IRQF_IRQPOLL, "eqep_interrupt", pdev)) + { + dev_err(&pdev->dev, "unable to request irq for eQEP\n"); + return -ENODEV; + } + + /* Register controls to sysfs */ + if (sysfs_create_group(&pdev->dev.kobj, &eqep_device_attr_group)) + { + dev_err(&pdev->dev, "sysfs creation failed\n"); + return -EINVAL; + } + + /* set QDECCTL */ + status = 0; /* default to Quadrature count mode, QSRC1 & QSRC0 = 0 */ + + /* set QSRC1 & QSRC0 bits, one of 4 count_modes. */ + if (!of_property_read_u32(pdev->dev.of_node, "count_mode", &value) && value <= 3) { + status |= value << 14; + + /* + * in count up or count down mode, count on rising edge only + * not on both edges. + */ + if (value >= 2) + status |= XCR; + } + dev_info(&pdev->dev, "count_mode:%d\n", value); + + /* Should we invert the qa input */ + if (!of_property_read_u32(pdev->dev.of_node, "invert_qa", &value)) + status = value ? status | QAP : status & ~QAP; + dev_info(&pdev->dev, "invert_qa:%d\n", value); + + /* Should we invert the qb input */ + if (!of_property_read_u32(pdev->dev.of_node, "invert_qb", &value)) + status = value ? status | QBP : status & ~QBP; + dev_info(&pdev->dev, "invert_qb:%d\n", value); + + /* Should we invert the index input */ + if (!of_property_read_u32(pdev->dev.of_node, "invert_qi", &value)) + status = value ? status | QIP : status & ~QIP; + dev_info(&pdev->dev, "invert_qi:%d\n", value); + + /* Should we invert the strobe input */ + if (!of_property_read_u32(pdev->dev.of_node, "invert_qs", &value)) + status = value ? status | QSP : status & ~QSP; + dev_info(&pdev->dev, "invert_qs:%d\n", value); + + /* Should we swap the cha and chb inputs */ + if (!of_property_read_u32(pdev->dev.of_node, "swap_inputs", &value)) + status = value ? status | SWAP : status & ~SWAP; + dev_info(&pdev->dev, "swap_inputs:%d\n", value); + + dev_info(&pdev->dev, "QDECCTL:0x%04x\n", status); + + /* Write the decoder control settings back to the control register */ + writew(status, eqep->mmio_base + QDECCTL); + + writel( 0, eqep->mmio_base + QPOSINIT); + writel(~0, eqep->mmio_base + QPOSMAX); + writel( 0, eqep->mmio_base + QPOSCNT); + + dev_info(&pdev->dev, "QPOSINIT:0x%08x\n", readl(eqep->mmio_base + QPOSINIT)); + dev_info(&pdev->dev, "QPOSMAX:0x%08x\n", readl(eqep->mmio_base + QPOSMAX)); + dev_info(&pdev->dev, "QPOSCNT:0x%08x\n", readl(eqep->mmio_base + QPOSCNT)); + + status = UTOF; /* Enable Unit Time Period interrupt. */ + if (!of_property_read_u32(pdev->dev.of_node, "omit_interrupt", &value) && value) { + status = 0; /* no interrupt */ + } + writew(status, eqep->mmio_base + QEINT); + dev_info(&pdev->dev, "omit_interrupt:%d\n", value); + dev_info(&pdev->dev, "QEINT:0x%04x\n", status); + + /* Calculate the timer ticks per second */ + period = 1000000000; + period = period * eqep->clk_rate; + do_div(period, NSEC_PER_SEC); + + /* Set this period into the unit timer period register */ + writel(period, eqep->mmio_base + QUPRD); + dev_info(&pdev->dev, "QUPRD:0x%08x\n", (u32) period); + + /* + * Enable the eQEP with basic position counting turned on + * PHEN - Quadrature position counter enable bit + * UTE - unit timer enable + * QCLM - latch QPOSLAT to QPOSCNT upon unit timer overflow + * IEL0 - Latch QPOSILAT on index signal. Rising or falling, IEL[1:0] = 0 is reserved + * SWI - Software initialization of position count register, i.e. set QPOSCNT <= QPOSINIT, + * but this bit was not being reset by hardware as advertised in TRM, + * (so omit & clear QPOSCNT manually elsewhere?) + */ + status = PHEN | UTE | QCLM | IEL0 | SWI; + writew(status, eqep->mmio_base + QEPCTL); + dev_info(&pdev->dev, "QEPCTL:0x%04x write\n", status); + dev_info(&pdev->dev, "QEPCTL:0x%04x read\n", readw(eqep->mmio_base + QEPCTL)); + + /* We default to absolute mode */ + eqep->op_mode = TIEQEP_MODE_ABSOLUTE; + + /* Enable the power management runtime */ + pm_runtime_enable(&pdev->dev); + + /* Increment the device usage count and run pm_runtime_resume() */ + pm_runtime_get_sync(&pdev->dev); + + /* Initialize the notify work struture */ + INIT_WORK(&eqep->notify_work, notify_handler); + + /* Decrement the device usage count (twice) and run pm_runtime_idle() if zero */ + pm_runtime_put_sync(&pdev->dev); + + /* Set the platform driver data to the data object we've been creating for the eQEP unit */ + platform_set_drvdata(pdev, eqep); + + /* Success! */ + dev_info(&pdev->dev, "irq:%d, clk_rate:%u\n", eqep->irq, eqep->clk_rate); + return 0; +} + +/* Remove an instance of the eQEP driver */ +static int eqep_remove(struct platform_device *pdev) +{ + /* Get the eQEP driver data from the platform device structure */ + struct eqep_chip *eqep = platform_get_drvdata(pdev); + + /* Cancel work */ + cancel_work_sync(&eqep->notify_work); + + /* Unmap from sysfs */ + sysfs_remove_group(&pdev->dev.kobj, &eqep_device_attr_group); + + /* Release important assets */ + free_irq(eqep->irq, pdev); + + /* Increment the device usage count and run pm_runtime_resume() */ + pm_runtime_get_sync(&pdev->dev); + + /* Decrement the device usage count (twice) and run pm_runtime_idle() if zero */ + pm_runtime_put_sync(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); + + /* Disable the runtime power management of this device */ + pm_runtime_disable(&pdev->dev); + + /* Return success */ + return 0; +} + +/* Power management suspend device */ +static int eqep_suspend(struct device *dev) +{ + /* Get the eqep driver information */ + struct eqep_chip *eqep = dev_get_drvdata(dev); + u16 tmp; + + /* Shut down interrupts */ + eqep->prior_qeint = readw(eqep->mmio_base + QEINT); + tmp = eqep->prior_qeint & ~UTOF; + writew(tmp, eqep->mmio_base + QEINT); + + /* Get the existing state of QEPCTL */ + eqep->prior_qepctl = readw(eqep->mmio_base + QEPCTL); + + /* Disable eQEP controller */ + writew(eqep->prior_qepctl & ~PHEN, eqep->mmio_base + QEPCTL); + + /* Decrement the device usage count and run pm_runtime_idle() if zero */ + pm_runtime_put_sync(dev); + + /* Return success */ + return 0; +} + +/* Power management wake device back up */ +static int eqep_resume(struct device *dev) +{ + /* Get the eqep driver information */ + struct eqep_chip *eqep = dev_get_drvdata(dev); + + /* Restore interrupt enabled register */ + writew(eqep->prior_qeint, eqep->mmio_base + QEINT); + + /* Restore prior qep control register */ + writew(eqep->prior_qepctl, eqep->mmio_base + QEPCTL); + + /* Increment the device usage count and run pm_runtime_resume() */ + pm_runtime_get_sync(dev); + + /* Success */ + return 0; +} + +/* create pm functions object */ +static SIMPLE_DEV_PM_OPS(eqep_pm_ops, eqep_suspend, eqep_resume); + +/* Platform driver information */ +static struct platform_driver eqep_driver = { + .driver = { + .name = "eqep", + .owner = THIS_MODULE, + .pm = &eqep_pm_ops, + .of_match_table = eqep_of_match, + }, + .probe = eqep_probe, + .remove = eqep_remove, +}; + +/* Register this platform driver */ +module_platform_driver(eqep_driver); + +/* Module information */ +MODULE_DESCRIPTION("TI eQEP driver"); +MODULE_AUTHOR("Nathaniel R. Lewis"); +MODULE_LICENSE("GPL"); diff --git b/drivers/misc/udoo_ard.c b/drivers/misc/udoo_ard.c new file mode 100755 index 0000000..2210738 --- /dev/null +++ b/drivers/misc/udoo_ard.c @@ -0,0 +1,417 @@ +/* + * udoo_ard.c + * UDOO quad/dual Arduino flash erase / CPU resetter + * + * Copyright (C) 2013-2015 Aidilab srl + * Author: UDOO Team + * Author: Giuseppe Pagano + * Author: Francesco Montefoschi + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "udoo_ard" +#define PINCTRL_DEFAULT "default" +#define AUTH_TOKEN 0x5A5A +#define MAX_MSEC_SINCE_LAST_IRQ 400 +#define GRAY_TIME_BETWEEN_RESET 10000 // In this time we can't accept new erase/reset code + +static struct workqueue_struct *erase_reset_wq; +typedef struct { + struct work_struct erase_reset_work; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_default; + int step; + int cmdcode; + int erase_reset_lock; + int gpio_bossac_clk; + int gpio_bossac_dat; + int gpio_ard_erase; + int gpio_ard_reset; + unsigned long last_int_time_in_ns; + unsigned long last_int_time_in_sec; +} erase_reset_work_t; + +erase_reset_work_t *work; +static u32 origTX, origRX; // original UART4 TX/RX pad control registers +static int major; // for /dev/udoo_ard +static struct class *udoo_class; + +static struct platform_device_id udoo_ard_devtype[] = { + { + /* keep it for coldfire */ + .name = DRIVER_NAME, + .driver_data = 0, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, udoo_ard_devtype); + +static const struct of_device_id udoo_ard_dt_ids[] = { + { .compatible = "udoo,imx6q-udoo-ard", .data = &udoo_ard_devtype[0], }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, udoo_ard_dt_ids); + +static void disable_serial(void) +{ + u32 addrTX; + void __iomem *_addrTX; + + printk("[bossac] Disable UART4 serial port.\n"); + + addrTX = 0x20E01F8; + _addrTX = ioremap(addrTX, 8); + + origTX = __raw_readl(_addrTX); + origRX = __raw_readl(_addrTX + 0x4); + + __raw_writel(0x15, _addrTX); + __raw_writel(0x15, _addrTX + 0x4); + + iounmap(_addrTX); +} + +static void enable_serial(void) +{ + u32 addrTX; + void __iomem *_addrTX; + + printk("[bossac] Enable UART4 serial port.\n"); + + addrTX = 0x20E01F8; + _addrTX = ioremap(addrTX, 8); + + __raw_writel(origTX, _addrTX); + __raw_writel(origRX, _addrTX + 0x4); + + iounmap(_addrTX); +} + +static void erase_reset(void) +{ + printk("[bossac] UDOO ERASE and RESET on Sam3x started.\n"); + + gpio_direction_input(work->gpio_ard_erase); + gpio_set_value(work->gpio_ard_reset, 1); + msleep(1); + + gpio_direction_output(work->gpio_ard_erase, 1); + msleep(300); + gpio_direction_input(work->gpio_ard_erase); + + msleep(10); + gpio_set_value(work->gpio_ard_reset, 0); + + msleep(80); + gpio_set_value(work->gpio_ard_reset, 1); + + printk("[bossac] UDOO ERASE and RESET on Sam3x EXECUTED.\n"); +} + +static void shutdown_sam3x(void) +{ + printk("[bossac] RESET on Sam3x.\n"); + + gpio_set_value(work->gpio_ard_reset, 0); +} + +static void erase_reset_wq_function( struct work_struct *work2) +{ + disable_serial(); + erase_reset(); + msleep(GRAY_TIME_BETWEEN_RESET); + + work->erase_reset_lock = 0; +} + +/* + * Called everytime the gpio_bossac_clk signal toggles. + * If the auth token (16 bit) is found, we look for the command code (4 bit). + * The code 0x0F is sent by Bossac to trigger an erase/reset (to achieve this, + * erase_reset_wq is scheduled). Before starting to program the flash, we disable + * the UART4 serial port, otherwise there is too noise on the serial lines (the + * programming port and UART4 port are connected together, see hw schematics). + * When Bossac finishes to flash/verify, the code 0x00 is sent which re-enables + * the UART4 port. + */ +static irqreturn_t udoo_bossac_req(int irq, void *dev_id) +{ + int retval, auth_bit, expected_bit, msec_since_last_irq; + u64 nowsec; + unsigned long rem_nsec; + erase_reset_work_t *erase_reset_work; + + auth_bit = 0; + if (gpio_get_value(work->gpio_bossac_dat) != 0x0) { + auth_bit = 1; + } + + erase_reset_work = (erase_reset_work_t *)work; + + nowsec = local_clock(); + rem_nsec = do_div(nowsec, 1000000000) ; + msec_since_last_irq = (((unsigned long)nowsec * 1000) + rem_nsec/1000000 ) - (((unsigned long)erase_reset_work->last_int_time_in_sec * 1000) + erase_reset_work->last_int_time_in_ns/1000000); + + if (msec_since_last_irq > MAX_MSEC_SINCE_LAST_IRQ) { + erase_reset_work->step = 0; +#ifdef DEBUG + printk("[bossac] Reset authentication timeout!\n"); +#endif + } + +#ifdef DEBUG + printk("[bossac] STEP %d -> 0x%d \n", erase_reset_work->step, auth_bit); +#endif + erase_reset_work->last_int_time_in_ns = rem_nsec; + erase_reset_work->last_int_time_in_sec = nowsec; + + if ( erase_reset_work->step < 16 ) { // Authenticating received token bit. + expected_bit = (( AUTH_TOKEN >> erase_reset_work->step ) & 0x01 ); + if ( auth_bit == expected_bit ) { + erase_reset_work->step = erase_reset_work->step + 1; + } else { + erase_reset_work->step = 0; + } + } else { // Passed all authentication step. Receiving command code. + erase_reset_work->cmdcode = erase_reset_work->cmdcode | (auth_bit << (erase_reset_work->step - 16)); + erase_reset_work->step = erase_reset_work->step + 1; + } + +#ifdef DEBUG + printk("erase_reset_work->erase_reset_lock = %d \n", erase_reset_work->erase_reset_lock); +#endif + if ( erase_reset_work->step == 20 ) { // Passed authentication and code acquiring step. +#ifdef DEBUG + printk("[bossac] Received code = 0x%04x \n", erase_reset_work->cmdcode); +#endif + if (erase_reset_work->cmdcode == 0xF) { + if (erase_reset_work->erase_reset_lock == 0) { + erase_reset_work->erase_reset_lock = 1; + retval = queue_work( erase_reset_wq, (struct work_struct *)work ); + } else { +#ifdef DEBUG + printk("Erase and reset operation already in progress. Do nothing.\n"); +#endif + } + } else { + enable_serial(); + } + erase_reset_work->step = 0; + erase_reset_work->cmdcode = 0; + } + + return IRQ_HANDLED; +} + +/* + * Takes control of clock, data, erase, reset GPIOs. + */ +static int gpio_setup(void) +{ + int ret; + + ret = gpio_request(work->gpio_bossac_clk, "BOSSA_CLK"); + if (ret) { + printk(KERN_ERR "request BOSSA_CLK IRQ\n"); + return -1; + } else { + gpio_direction_input(work->gpio_bossac_clk); + } + + ret = gpio_request(work->gpio_bossac_dat, "BOSSA_DAT"); + if (ret) { + printk(KERN_ERR "request BOSSA_DAT IRQ\n"); + return -1; + } else { + gpio_direction_input(work->gpio_bossac_dat); + } + + ret = gpio_request(work->gpio_ard_erase, "BOSSAC"); + if (ret) { + printk(KERN_ERR "request GPIO FOR ARDUINO ERASE\n"); + return -1; + } else { + gpio_direction_input(work->gpio_ard_erase); + } + + ret = gpio_request(work->gpio_ard_reset, "BOSSAC"); + if (ret) { + printk(KERN_ERR "request GPIO FOR ARDUINO RESET\n"); + return -1; + } else { + gpio_direction_output(work->gpio_ard_reset, 1); + } + + return 0; +} + +static ssize_t device_write(struct file *filp, const char *buff, size_t len, loff_t *off) +{ + char msg[10]; + long res; + + if (len > 10) + return -EINVAL; + + + res = copy_from_user(msg, buff, len); + if (res) { + return -EFAULT; + } + msg[len] = '\0'; + + if (strcmp(msg, "erase")==0) { + erase_reset(); + } else if (strcmp(msg, "shutdown")==0) { + shutdown_sam3x(); + } else if (strcmp(msg, "uartoff")==0) { + disable_serial(); + } else if (strcmp(msg, "uarton")==0) { + enable_serial(); + } else { + printk("[bossac] udoo_ard invalid operation! %s", msg); + } + + return len; +} + +static struct file_operations fops = { + .write = device_write, +}; + +/* + * If a fdt udoo_ard entry is found, we register an IRQ on bossac clock line + * and we create /dev/udoo_ard + */ +static int udoo_ard_probe(struct platform_device *pdev) +{ + int retval; + struct device *temp_class; + struct platform_device *bdev; + struct device_node *np; + + bdev = kzalloc(sizeof(*bdev), GFP_KERNEL); + np = pdev->dev.of_node; + + if (!np) + return -ENODEV; + + work = (erase_reset_work_t *)kmalloc(sizeof(erase_reset_work_t), GFP_KERNEL); + if (work) { + work->gpio_ard_reset = of_get_named_gpio(np, "bossac-reset-gpio", 0); + work->gpio_ard_erase = of_get_named_gpio(np, "bossac-erase-gpio", 0); + work->gpio_bossac_clk = of_get_named_gpio(np, "bossac-clk-gpio", 0); + work->gpio_bossac_dat = of_get_named_gpio(np, "bossac-dat-gpio", 0); + work->pinctrl = devm_pinctrl_get(&pdev->dev); + work->pins_default = pinctrl_lookup_state(work->pinctrl, PINCTRL_DEFAULT); + } else { + printk("[bossac] Failed to allocate data structure."); + return -ENOMEM; + } + + pinctrl_select_state(work->pinctrl, work->pins_default); + gpio_setup(); + + printk("[bossac] Registering IRQ %d for BOSSAC Arduino erase/reset operation\n", gpio_to_irq(work->gpio_bossac_clk)); + retval = request_irq(gpio_to_irq(work->gpio_bossac_clk), udoo_bossac_req, IRQF_TRIGGER_FALLING, "UDOO", bdev); + + major = register_chrdev(major, "udoo_ard", &fops); + if (major < 0) { + printk(KERN_ERR "[bossac] Cannot get major for UDOO Ard\n"); + return -EBUSY; + } + + udoo_class = class_create(THIS_MODULE, "udoo_ard"); + if (IS_ERR(udoo_class)) { + return PTR_ERR(udoo_class); + } + + temp_class = device_create(udoo_class, NULL, MKDEV(major, 0), NULL, "udoo_ard"); + if (IS_ERR(temp_class)) { + return PTR_ERR(temp_class); + } + + printk("[bossac] Created device file /dev/udoo_ard\n"); + + erase_reset_wq = create_workqueue("erase_reset_queue"); + if (erase_reset_wq) { + + /* Queue some work (item 1) */ + if (work) { + INIT_WORK( (struct work_struct *)work, erase_reset_wq_function ); + work->step = 1; + work->cmdcode = 0; + work->last_int_time_in_ns = 0; + work->last_int_time_in_sec = 0; + work->erase_reset_lock = 0; + // retval = queue_work( erase_reset_wq, (struct work_struct *)work ); + } + } + return 0; +} + +static int udoo_ard_remove(struct platform_device *pdev) +{ + printk("[bossac] Unloading UDOO ard driver.\n"); + free_irq(gpio_to_irq(work->gpio_bossac_clk), NULL); + + gpio_free(work->gpio_ard_reset); + gpio_free(work->gpio_ard_erase); + gpio_free(work->gpio_bossac_clk); + gpio_free(work->gpio_bossac_dat); + + device_destroy(udoo_class, MKDEV(major, 0)); + class_destroy(udoo_class); + unregister_chrdev(major, "udoo_ard"); + + return 0; +} + +static struct platform_driver udoo_ard_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = udoo_ard_dt_ids, + }, + .id_table = udoo_ard_devtype, + .probe = udoo_ard_probe, + .remove = udoo_ard_remove, +}; + +module_platform_driver(udoo_ard_driver); + +MODULE_ALIAS("platform:"DRIVER_NAME); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index a98aeda..a981c5e 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -107,6 +107,10 @@ struct davinci_mdio_data { u32 clk_div; }; +#if IS_ENABLED(CONFIG_OF) +static void davinci_mdio_update_dt_from_phymask(u32 phy_mask); +#endif + static void davinci_mdio_init_clk(struct davinci_mdio_data *data) { u32 mdio_in, div, mdio_out_khz, access_time; @@ -174,6 +178,12 @@ static int davinci_mdio_reset(struct mii_bus *bus) /* restrict mdio bus to live phys only */ dev_info(data->dev, "detected phy mask %x\n", ~phy_mask); phy_mask = ~phy_mask; + + #if IS_ENABLED(CONFIG_OF) + if (of_machine_is_compatible("ti,am335x-bone")) + davinci_mdio_update_dt_from_phymask(phy_mask); + #endif + } else { /* desperately scan all phys */ dev_warn(data->dev, "no live phy, scanning all\n"); @@ -487,6 +497,93 @@ static int davinci_mdio_runtime_resume(struct device *dev) davinci_mdio_enable(data); return 0; } +static void davinci_mdio_update_dt_from_phymask(u32 phy_mask) +{ + int i, len, skip; + u32 addr; + __be32 *old_phy_p, *phy_id_p; + struct property *phy_id_property = NULL; + struct device_node *node_p, *slave_p; + + addr = 0; + + for (i = 0; i < PHY_MAX_ADDR; i++) { + if ((phy_mask & (1 << i)) == 0) { + addr = (u32) i; + break; + } + } + + for_each_compatible_node(node_p, NULL, "ti,cpsw") { + for_each_node_by_name(slave_p, "slave") { + +#if IS_ENABLED(CONFIG_OF_OVERLAY) + skip = 1; + // Hack, the overlay fixup "slave" doesn't have phy-mode... + old_phy_p = (__be32 *) of_get_property(slave_p, "phy-mode", &len); + + if (len != (sizeof(__be32 *) * 1)) + { + skip = 0; + } + + if (skip) { +#endif + + old_phy_p = (__be32 *) of_get_property(slave_p, "phy_id", &len); + + if (len != (sizeof(__be32 *) * 2)) + goto err_out; + + if (old_phy_p) { + + phy_id_property = kzalloc(sizeof(*phy_id_property), GFP_KERNEL); + + if (! phy_id_property) + goto err_out; + + phy_id_property->length = len; + phy_id_property->name = kstrdup("phy_id", GFP_KERNEL); + phy_id_property->value = kzalloc(len, GFP_KERNEL); + + if (! phy_id_property->name) + goto err_out; + + if (! phy_id_property->value) + goto err_out; + + memcpy(phy_id_property->value, old_phy_p, len); + + phy_id_p = (__be32 *) phy_id_property->value + 1; + + *phy_id_p = cpu_to_be32(addr); + + of_update_property(slave_p, phy_id_property); + pr_info("davinci_mdio: dt: updated phy_id[%d] from phy_mask[%x]\n", addr, phy_mask); + + ++addr; + } +#if IS_ENABLED(CONFIG_OF_OVERLAY) + } +#endif + } + } + + return; + +err_out: + + if (phy_id_property) { + if (phy_id_property->name) + kfree(phy_id_property->name); + + if (phy_id_property->value) + kfree(phy_id_property->value); + + if (phy_id_property) + kfree(phy_id_property); + } +} #endif #ifdef CONFIG_PM_SLEEP diff --git a/drivers/net/ethernet/wiznet/w5100-spi.c b/drivers/net/ethernet/wiznet/w5100-spi.c index 93a2d3c..e981d2a 100644 --- a/drivers/net/ethernet/wiznet/w5100-spi.c +++ b/drivers/net/ethernet/wiznet/w5100-spi.c @@ -442,6 +442,21 @@ static int w5100_spi_remove(struct spi_device *spi) return w5100_remove(&spi->dev); } +#ifdef CONFIG_OF +static const struct of_device_id w5100_spi_of_match[] = { + { .compatible = "wiznet,w5500" }, + { } +}; +MODULE_DEVICE_TABLE(of, w5100_spi_of_match); +#endif + +#ifdef CONFIG_OF +static const struct spi_device_id w5100_spi_ids[] = { + { "w5500", W5500 }, + {} +}; +MODULE_DEVICE_TABLE(spi, w5100_spi_ids); +#else static const struct spi_device_id w5100_spi_ids[] = { { "w5100", W5100 }, { "w5200", W5200 }, @@ -449,11 +464,13 @@ static const struct spi_device_id w5100_spi_ids[] = { {} }; MODULE_DEVICE_TABLE(spi, w5100_spi_ids); +#endif static struct spi_driver w5100_spi_driver = { .driver = { .name = "w5100", .pm = &w5100_pm_ops, + .of_match_table = of_match_ptr(w5100_spi_of_match), }, .probe = w5100_spi_probe, .remove = w5100_spi_remove, diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 63454b5..c1bb046 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -1,3 +1,4 @@ source "drivers/power/avs/Kconfig" source "drivers/power/reset/Kconfig" source "drivers/power/supply/Kconfig" +source "drivers/power/pwrseq/Kconfig" diff --git a/drivers/power/Makefile b/drivers/power/Makefile index ff35c71..7db8035 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_POWER_AVS) += avs/ obj-$(CONFIG_POWER_RESET) += reset/ obj-$(CONFIG_POWER_SUPPLY) += supply/ +obj-$(CONFIG_POWER_SEQUENCE) += pwrseq/ diff --git b/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig new file mode 100644 index 0000000..c6b3569 --- /dev/null +++ b/drivers/power/pwrseq/Kconfig @@ -0,0 +1,20 @@ +# +# Power Sequence library +# + +menuconfig POWER_SEQUENCE + bool "Power sequence control" + help + It is used for drivers which needs to do power sequence + (eg, turn on clock, toggle reset gpio) before the related + devices can be found by hardware, eg, USB bus. + +if POWER_SEQUENCE + +config PWRSEQ_GENERIC + bool "Generic power sequence control" + depends on OF + help + This is the generic power sequence control library, and is + supposed to support common power sequence usage. +endif diff --git b/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile new file mode 100644 index 0000000..ad82389 --- /dev/null +++ b/drivers/power/pwrseq/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_POWER_SEQUENCE) += core.o +obj-$(CONFIG_PWRSEQ_GENERIC) += pwrseq_generic.o diff --git b/drivers/power/pwrseq/core.c b/drivers/power/pwrseq/core.c new file mode 100644 index 0000000..3d19e62 --- /dev/null +++ b/drivers/power/pwrseq/core.c @@ -0,0 +1,335 @@ +/* + * core.c power sequence core file + * + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Author: Peter Chen + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. + */ + +#include +#include +#include +#include +#include + +static DEFINE_MUTEX(pwrseq_list_mutex); +static LIST_HEAD(pwrseq_list); + +static int pwrseq_get(struct device_node *np, struct pwrseq *p) +{ + if (p && p->get) + return p->get(np, p); + + return -ENOTSUPP; +} + +static int pwrseq_on(struct pwrseq *p) +{ + if (p && p->on) + return p->on(p); + + return -ENOTSUPP; +} + +static void pwrseq_off(struct pwrseq *p) +{ + if (p && p->off) + p->off(p); +} + +static void pwrseq_put(struct pwrseq *p) +{ + if (p && p->put) + p->put(p); +} + +/** + * pwrseq_register - Add pwrseq instance to global pwrseq list + * + * @pwrseq: the pwrseq instance + */ +void pwrseq_register(struct pwrseq *pwrseq) +{ + mutex_lock(&pwrseq_list_mutex); + list_add(&pwrseq->node, &pwrseq_list); + mutex_unlock(&pwrseq_list_mutex); +} +EXPORT_SYMBOL_GPL(pwrseq_register); + +/** + * pwrseq_unregister - Remove pwrseq instance from global pwrseq list + * + * @pwrseq: the pwrseq instance + */ +void pwrseq_unregister(struct pwrseq *pwrseq) +{ + mutex_lock(&pwrseq_list_mutex); + list_del(&pwrseq->node); + mutex_unlock(&pwrseq_list_mutex); +} +EXPORT_SYMBOL_GPL(pwrseq_unregister); + +static struct pwrseq *pwrseq_find_available_instance(struct device_node *np) +{ + struct pwrseq *pwrseq; + + mutex_lock(&pwrseq_list_mutex); + list_for_each_entry(pwrseq, &pwrseq_list, node) { + if (pwrseq->used) + continue; + + /* compare compatible string for pwrseq node */ + if (of_match_node(pwrseq->pwrseq_of_match_table, np)) { + pwrseq->used = true; + mutex_unlock(&pwrseq_list_mutex); + return pwrseq; + } + + /* return generic pwrseq instance */ + if (!strcmp(pwrseq->pwrseq_of_match_table->compatible, + "generic")) { + pr_debug("using generic pwrseq instance for %s\n", + np->full_name); + pwrseq->used = true; + mutex_unlock(&pwrseq_list_mutex); + return pwrseq; + } + } + mutex_unlock(&pwrseq_list_mutex); + pr_debug("Can't find any pwrseq instances for %s\n", np->full_name); + + return NULL; +} + +/** + * of_pwrseq_on - Carry out power sequence on for device node + * + * @np: the device node would like to power on + * + * Carry out a single device power on. If multiple devices + * need to be handled, use of_pwrseq_on_list() instead. + * + * Return a pointer to the power sequence instance on success, + * or an error code otherwise. + */ +struct pwrseq *of_pwrseq_on(struct device_node *np) +{ + struct pwrseq *pwrseq; + int ret; + + pwrseq = pwrseq_find_available_instance(np); + if (!pwrseq) + return ERR_PTR(-ENOENT); + + ret = pwrseq_get(np, pwrseq); + if (ret) { + /* Mark current pwrseq as unused */ + pwrseq->used = false; + return ERR_PTR(ret); + } + + ret = pwrseq_on(pwrseq); + if (ret) + goto pwr_put; + + return pwrseq; + +pwr_put: + pwrseq_put(pwrseq); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(of_pwrseq_on); + +/** + * of_pwrseq_off - Carry out power sequence off for this pwrseq instance + * + * @pwrseq: the pwrseq instance which related device would like to be off + * + * This API is used to power off single device, it is the opposite + * operation for of_pwrseq_on. + */ +void of_pwrseq_off(struct pwrseq *pwrseq) +{ + pwrseq_off(pwrseq); + pwrseq_put(pwrseq); +} +EXPORT_SYMBOL_GPL(of_pwrseq_off); + +/** + * of_pwrseq_on_list - Carry out power sequence on for list + * + * @np: the device node would like to power on + * @head: the list head for pwrseq list on this bus + * + * This API is used to power on multiple devices at single bus. + * If there are several devices on bus (eg, USB bus), uses this + * this API. Otherwise, use of_pwrseq_on instead. After the device + * is powered on successfully, it will be added to pwrseq list for + * this bus. The caller needs to use mutex_lock for concurrent. + * + * Return 0 on success, or an error value otherwise. + */ +int of_pwrseq_on_list(struct device_node *np, struct list_head *head) +{ + struct pwrseq *pwrseq; + struct pwrseq_list_per_dev *pwrseq_list_node; + + pwrseq_list_node = kzalloc(sizeof(*pwrseq_list_node), GFP_KERNEL); + if (!pwrseq_list_node) + return -ENOMEM; + + pwrseq = of_pwrseq_on(np); + if (IS_ERR(pwrseq)) { + kfree(pwrseq_list_node); + return PTR_ERR(pwrseq); + } + + pwrseq_list_node->pwrseq = pwrseq; + list_add(&pwrseq_list_node->list, head); + + return 0; +} +EXPORT_SYMBOL_GPL(of_pwrseq_on_list); + +/** + * of_pwrseq_off_list - Carry out power sequence off for the list + * + * @head: the list head for pwrseq instance list on this bus + * + * This API is used to power off all devices on this bus, it is + * the opposite operation for of_pwrseq_on_list. + * The caller needs to use mutex_lock for concurrent. + */ +void of_pwrseq_off_list(struct list_head *head) +{ + struct pwrseq *pwrseq; + struct pwrseq_list_per_dev *pwrseq_list_node, *tmp_node; + + list_for_each_entry_safe(pwrseq_list_node, tmp_node, head, list) { + pwrseq = pwrseq_list_node->pwrseq; + of_pwrseq_off(pwrseq); + list_del(&pwrseq_list_node->list); + kfree(pwrseq_list_node); + } +} +EXPORT_SYMBOL_GPL(of_pwrseq_off_list); + +/** + * pwrseq_suspend - Carry out power sequence suspend for this pwrseq instance + * + * @pwrseq: the pwrseq instance + * + * This API is used to do suspend operation on pwrseq instance. + * + * Return 0 on success, or an error value otherwise. + */ +int pwrseq_suspend(struct pwrseq *p) +{ + int ret = 0; + + if (p && p->suspend) + ret = p->suspend(p); + else + return ret; + + if (!ret) + p->suspended = true; + else + pr_err("%s failed\n", __func__); + + return ret; +} +EXPORT_SYMBOL_GPL(pwrseq_suspend); + +/** + * pwrseq_resume - Carry out power sequence resume for this pwrseq instance + * + * @pwrseq: the pwrseq instance + * + * This API is used to do resume operation on pwrseq instance. + * + * Return 0 on success, or an error value otherwise. + */ +int pwrseq_resume(struct pwrseq *p) +{ + int ret = 0; + + if (p && p->resume) + ret = p->resume(p); + else + return ret; + + if (!ret) + p->suspended = false; + else + pr_err("%s failed\n", __func__); + + return ret; +} +EXPORT_SYMBOL_GPL(pwrseq_resume); + +/** + * pwrseq_suspend_list - Carry out power sequence suspend for list + * + * @head: the list head for pwrseq instance list on this bus + * + * This API is used to do suspend on all power sequence instances on this bus. + * The caller needs to use mutex_lock for concurrent. + */ +int pwrseq_suspend_list(struct list_head *head) +{ + struct pwrseq *pwrseq; + struct pwrseq_list_per_dev *pwrseq_list_node; + int ret = 0; + + list_for_each_entry(pwrseq_list_node, head, list) { + ret = pwrseq_suspend(pwrseq_list_node->pwrseq); + if (ret) + break; + } + + if (ret) { + list_for_each_entry(pwrseq_list_node, head, list) { + pwrseq = pwrseq_list_node->pwrseq; + if (pwrseq->suspended) + pwrseq_resume(pwrseq); + } + } + + return ret; +} +EXPORT_SYMBOL_GPL(pwrseq_suspend_list); + +/** + * pwrseq_resume_list - Carry out power sequence resume for the list + * + * @head: the list head for pwrseq instance list on this bus + * + * This API is used to do resume on all power sequence instances on this bus. + * The caller needs to use mutex_lock for concurrent. + */ +int pwrseq_resume_list(struct list_head *head) +{ + struct pwrseq_list_per_dev *pwrseq_list_node; + int ret = 0; + + list_for_each_entry(pwrseq_list_node, head, list) { + ret = pwrseq_resume(pwrseq_list_node->pwrseq); + if (ret) + break; + } + + return ret; +} +EXPORT_SYMBOL_GPL(pwrseq_resume_list); diff --git b/drivers/power/pwrseq/pwrseq_generic.c b/drivers/power/pwrseq/pwrseq_generic.c new file mode 100644 index 0000000..4e7c090 --- /dev/null +++ b/drivers/power/pwrseq/pwrseq_generic.c @@ -0,0 +1,234 @@ +/* + * pwrseq_generic.c Generic power sequence handling + * + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Author: Peter Chen + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +struct pwrseq_generic { + struct pwrseq pwrseq; + struct gpio_desc *gpiod_reset; + struct clk *clks[PWRSEQ_MAX_CLKS]; + u32 duration_us; + bool suspended; +}; + +#define to_generic_pwrseq(p) container_of(p, struct pwrseq_generic, pwrseq) + +static int pwrseq_generic_alloc_instance(void); +static const struct of_device_id generic_id_table[] = { + { .compatible = "generic",}, + { /* sentinel */ } +}; + +static int pwrseq_generic_suspend(struct pwrseq *pwrseq) +{ + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); + int clk; + + for (clk = PWRSEQ_MAX_CLKS - 1; clk >= 0; clk--) + clk_disable_unprepare(pwrseq_gen->clks[clk]); + + pwrseq_gen->suspended = true; + return 0; +} + +static int pwrseq_generic_resume(struct pwrseq *pwrseq) +{ + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); + int clk, ret = 0; + + for (clk = 0; clk < PWRSEQ_MAX_CLKS && pwrseq_gen->clks[clk]; clk++) { + ret = clk_prepare_enable(pwrseq_gen->clks[clk]); + if (ret) { + pr_err("Can't enable clock, ret=%d\n", ret); + goto err_disable_clks; + } + } + + pwrseq_gen->suspended = false; + return ret; + +err_disable_clks: + while (--clk >= 0) + clk_disable_unprepare(pwrseq_gen->clks[clk]); + + return ret; +} + +static void pwrseq_generic_put(struct pwrseq *pwrseq) +{ + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); + int clk; + + if (pwrseq_gen->gpiod_reset) + gpiod_put(pwrseq_gen->gpiod_reset); + + for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) + clk_put(pwrseq_gen->clks[clk]); + + pwrseq_unregister(&pwrseq_gen->pwrseq); + kfree(pwrseq_gen); +} + +static void pwrseq_generic_off(struct pwrseq *pwrseq) +{ + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); + int clk; + + if (pwrseq_gen->suspended) + return; + + for (clk = PWRSEQ_MAX_CLKS - 1; clk >= 0; clk--) + clk_disable_unprepare(pwrseq_gen->clks[clk]); +} + +static int pwrseq_generic_on(struct pwrseq *pwrseq) +{ + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); + int clk, ret = 0; + struct gpio_desc *gpiod_reset = pwrseq_gen->gpiod_reset; + + for (clk = 0; clk < PWRSEQ_MAX_CLKS && pwrseq_gen->clks[clk]; clk++) { + ret = clk_prepare_enable(pwrseq_gen->clks[clk]); + if (ret) { + pr_err("Can't enable clock, ret=%d\n", ret); + goto err_disable_clks; + } + } + + if (gpiod_reset) { + u32 duration_us = pwrseq_gen->duration_us; + + if (duration_us <= 10) + udelay(10); + else + usleep_range(duration_us, duration_us + 100); + gpiod_set_value(gpiod_reset, 0); + } + + return ret; + +err_disable_clks: + while (--clk >= 0) + clk_disable_unprepare(pwrseq_gen->clks[clk]); + + return ret; +} + +static int pwrseq_generic_get(struct device_node *np, struct pwrseq *pwrseq) +{ + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); + enum of_gpio_flags flags; + int reset_gpio, clk, ret = 0; + + for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) { + pwrseq_gen->clks[clk] = of_clk_get(np, clk); + if (IS_ERR(pwrseq_gen->clks[clk])) { + ret = PTR_ERR(pwrseq_gen->clks[clk]); + if (ret != -ENOENT) + goto err_put_clks; + pwrseq_gen->clks[clk] = NULL; + break; + } + } + + reset_gpio = of_get_named_gpio_flags(np, "reset-gpios", 0, &flags); + if (gpio_is_valid(reset_gpio)) { + unsigned long gpio_flags; + + if (flags & OF_GPIO_ACTIVE_LOW) + gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_LOW; + else + gpio_flags = GPIOF_OUT_INIT_HIGH; + + ret = gpio_request_one(reset_gpio, gpio_flags, + "pwrseq-reset-gpios"); + if (ret) + goto err_put_clks; + + pwrseq_gen->gpiod_reset = gpio_to_desc(reset_gpio); + of_property_read_u32(np, "reset-duration-us", + &pwrseq_gen->duration_us); + } else if (reset_gpio == -ENOENT) { + ; /* no such gpio */ + } else { + ret = reset_gpio; + pr_err("Failed to get reset gpio on %s, err = %d\n", + np->full_name, reset_gpio); + goto err_put_clks; + } + + /* allocate new one for later pwrseq instance request */ + ret = pwrseq_generic_alloc_instance(); + if (ret) + goto err_put_gpio; + + return 0; + +err_put_gpio: + if (pwrseq_gen->gpiod_reset) + gpiod_put(pwrseq_gen->gpiod_reset); +err_put_clks: + while (--clk >= 0) + clk_put(pwrseq_gen->clks[clk]); + return ret; +} + +/** + * pwrseq_generic_alloc_instance - power sequence instance allocation + * + * This function is used to allocate one generic power sequence instance, + * it is called when the system boots up and after one power sequence + * instance is got successfully. + * + * Return zero on success or an error code otherwise. + */ +static int pwrseq_generic_alloc_instance(void) +{ + struct pwrseq_generic *pwrseq_gen; + + pwrseq_gen = kzalloc(sizeof(*pwrseq_gen), GFP_KERNEL); + if (!pwrseq_gen) + return -ENOMEM; + + pwrseq_gen->pwrseq.pwrseq_of_match_table = generic_id_table; + pwrseq_gen->pwrseq.get = pwrseq_generic_get; + pwrseq_gen->pwrseq.on = pwrseq_generic_on; + pwrseq_gen->pwrseq.off = pwrseq_generic_off; + pwrseq_gen->pwrseq.put = pwrseq_generic_put; + pwrseq_gen->pwrseq.suspend = pwrseq_generic_suspend; + pwrseq_gen->pwrseq.resume = pwrseq_generic_resume; + + pwrseq_register(&pwrseq_gen->pwrseq); + return 0; +} + +/* Allocate one pwrseq instance during boots up */ +static int __init pwrseq_generic_register(void) +{ + return pwrseq_generic_alloc_instance(); +} +postcore_initcall(pwrseq_generic_register) diff --git a/drivers/pwm/sysfs.c b/drivers/pwm/sysfs.c index ceb233d..5c34b81 100644 --- a/drivers/pwm/sysfs.c +++ b/drivers/pwm/sysfs.c @@ -23,6 +23,8 @@ #include #include +static struct class pwm_class; + struct pwm_export { struct device child; struct pwm_device *pwm; @@ -239,6 +241,10 @@ static struct attribute *pwm_attrs[] = { }; ATTRIBUTE_GROUPS(pwm); +static const struct device_type pwm_channel_type = { + .name = "pwm_channel", +}; + static void pwm_export_release(struct device *child) { struct pwm_export *export = child_to_pwm_export(child); @@ -248,6 +254,7 @@ static void pwm_export_release(struct device *child) static int pwm_export_child(struct device *parent, struct pwm_device *pwm) { + struct pwm_chip *chip = dev_get_drvdata(parent); struct pwm_export *export; char *pwm_prop[2]; int ret; @@ -266,9 +273,11 @@ static int pwm_export_child(struct device *parent, struct pwm_device *pwm) export->child.release = pwm_export_release; export->child.parent = parent; + export->child.type = &pwm_channel_type; export->child.devt = MKDEV(0, 0); + export->child.class = &pwm_class; export->child.groups = pwm_groups; - dev_set_name(&export->child, "pwm%u", pwm->hwpwm); + dev_set_name(&export->child, "pwm-%d:%u", chip->base, pwm->hwpwm); ret = device_register(&export->child); if (ret) { @@ -384,7 +393,6 @@ ATTRIBUTE_GROUPS(pwm_chip); static struct class pwm_class = { .name = "pwm", .owner = THIS_MODULE, - .dev_groups = pwm_chip_groups, }; static int pwmchip_sysfs_match(struct device *parent, const void *data) @@ -400,7 +408,8 @@ void pwmchip_sysfs_export(struct pwm_chip *chip) * If device_create() fails the pwm_chip is still usable by * the kernel its just not exported. */ - parent = device_create(&pwm_class, chip->dev, MKDEV(0, 0), chip, + parent = device_create_with_groups(&pwm_class, chip->dev, MKDEV(0, 0), + chip, pwm_chip_groups, "pwmchip%d", chip->base); if (IS_ERR(parent)) { dev_warn(chip->dev, diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index b0c76e2..2dabf00 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -725,9 +725,9 @@ static int spidev_probe(struct spi_device *spi) * compatible string, it is a Linux implementation thing * rather than a description of the hardware. */ - WARN(spi->dev.of_node && - of_device_is_compatible(spi->dev.of_node, "spidev"), - "%pOF: buggy DT: spidev listed directly in DT\n", spi->dev.of_node); +// WARN(spi->dev.of_node && +// of_device_is_compatible(spi->dev.of_node, "spidev"), +// "%pOF: buggy DT: spidev listed directly in DT\n", spi->dev.of_node); spidev_probe_acpi(spi); diff --git a/drivers/staging/fbtft/fb_ssd1306.c b/drivers/staging/fbtft/fb_ssd1306.c index 50172dd..f7be4f9 100644 --- a/drivers/staging/fbtft/fb_ssd1306.c +++ b/drivers/staging/fbtft/fb_ssd1306.c @@ -55,6 +55,8 @@ static int init_display(struct fbtft_par *par) write_reg(par, 0x3F); else if (par->info->var.yres == 48) write_reg(par, 0x2F); + else if (par->info->var.yres == 39) + write_reg(par, 0x27); /* https://libstock.mikroe.com/projects/download/1111/2577/1411057038_oled_b_click___e_mikroc_arm.zip */ else write_reg(par, 0x1F); @@ -72,16 +74,24 @@ static int init_display(struct fbtft_par *par) /* Set Memory Addressing Mode */ write_reg(par, 0x20); - /* Vertical addressing mode */ + /* Vertical Addressing mode */ write_reg(par, 0x01); /* Set Segment Re-map */ - /* column address 127 is mapped to SEG0 */ - write_reg(par, 0xA0 | 0x1); + if (par->info->var.yres == 39) + /* no segment re-map */ + write_reg(par, 0xA0 | 0x0); + else + /* column address 127 is mapped to SEG0 */ + write_reg(par, 0xA0 | 0x1); /* Set COM Output Scan Direction */ - /* remapped mode. Scan from COM[N-1] to COM0 */ - write_reg(par, 0xC8); + if (par->info->var.yres == 39) + /* no columnt re-map mode. Scan from COM0 to COM[N-1] */ + write_reg(par, 0xC0 | 0x0); + else + /* remapped mode. Scan from COM[N-1] to COM0 */ + write_reg(par, 0xC0 | 0x8); /* Set COM Pins Hardware Configuration */ write_reg(par, 0xDA); @@ -91,18 +101,27 @@ static int init_display(struct fbtft_par *par) else if (par->info->var.yres == 48) /* A[4]=1b, Alternative COM pin configuration */ write_reg(par, 0x12); + else if (par->info->var.yres == 39) + /* A[4]=1b, Alternative COM pin configuration */ + write_reg(par, 0x12); else /* A[4]=0b, Sequential COM pin configuration */ write_reg(par, 0x02); /* Set Pre-charge Period */ write_reg(par, 0xD9); - write_reg(par, 0xF1); + if (par->info->var.yres == 39) + write_reg(par, 0x25); + else + write_reg(par, 0xF1); /* Set VCOMH Deselect Level */ write_reg(par, 0xDB); - /* according to the datasheet, this value is out of bounds */ - write_reg(par, 0x40); + if (par->info->var.yres == 39) + write_reg(par, 0x20); + else + /* according to the datasheet, this value is out of bounds */ + write_reg(par, 0x40); /* Entire Display ON */ /* Resume to RAM content display. Output follows RAM content */ @@ -133,17 +152,35 @@ static void set_addr_win_64x48(struct fbtft_par *par) write_reg(par, 0x5); } +static void set_addr_win_96x39(struct fbtft_par *par) +{ + /* Set Page Address */ + write_reg(par, 0xB0); + + /* Set Column Address */ + write_reg(par, 0x21); + write_reg(par, 0x00); + write_reg(par, 0x5F); + + /* Set Page Address Range */ + write_reg(par, 0x22); + write_reg(par, 0x0); + write_reg(par, 0x4); +} + static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) { - /* Set Lower Column Start Address for Page Addressing Mode */ + /* Set Lower Column Start Address for Vertical Addressing Mode */ write_reg(par, 0x00 | 0x0); - /* Set Higher Column Start Address for Page Addressing Mode */ + /* Set Higher Column Start Address for Vertical Addressing Mode */ write_reg(par, 0x10 | 0x0); /* Set Display Start Line */ write_reg(par, 0x40 | 0x0); if (par->info->var.xres == 64 && par->info->var.yres == 48) set_addr_win_64x48(par); + else if (par->info->var.xres == 96 && par->info->var.yres == 39) + set_addr_win_96x39(par); } static int blank(struct fbtft_par *par, bool on) @@ -187,11 +224,19 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) *buf |= (vmem16[(y * 8 + i) * xres + x] ? 1 : 0) << i; buf++; } + if (yres % 8) { + *buf = 0x00; + for (i = 0; i < (yres - (y * 8)); i++) + *buf |= (vmem16[(y * 8 + i) * xres + x] ? 1 : 0) << i; + buf++; + y++; + } } /* Write data */ gpio_set_value(par->gpio.dc, 1); - ret = par->fbtftops.write(par, par->txbuf.buf, xres * yres / 8); + ret = par->fbtftops.write(par, par->txbuf.buf, xres * (yres / 8 + (yres % 8 != 0))); + //ret = par->fbtftops.write(par, par->txbuf.buf, xres * 128 / 8); if (ret < 0) dev_err(par->info->device, "write failed and returned: %d\n", ret); diff --git a/drivers/staging/fbtft/fbtft_device.c b/drivers/staging/fbtft/fbtft_device.c index 50e97da..7e1e0bb 100644 --- a/drivers/staging/fbtft/fbtft_device.c +++ b/drivers/staging/fbtft/fbtft_device.c @@ -387,6 +387,25 @@ static struct fbtft_device_display displays[] = { }, } } + }, { + .name = "mikroe_oledb", + .spi = &(struct spi_board_info) { + .modalias = "fb_ssd1306", + .max_speed_hz = 16000000, + .mode = SPI_MODE_0, + .platform_data = &(struct fbtft_platform_data) { + .display = { + .width = 96, + .height = 39, + .buswidth = 8, + }, + .gpios = (const struct fbtft_gpio []) { + { "reset", 45 }, + { "dc", 110 }, + {}, + }, + } + } }, { .name = "admatec_c-berry28", .spi = &(struct spi_board_info) { diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index a019286..a77450d 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -1494,10 +1494,10 @@ static int __init omap8250_console_fixup(void) } add_preferred_console("ttyS", idx, options); - pr_err("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n", + pr_info("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n", idx, idx); - pr_err("This ensures that you still see kernel messages. Please\n"); - pr_err("update your kernel commandline.\n"); + pr_info("This ensures that you still see kernel messages. Please\n"); + pr_info("update your kernel commandline.\n"); return 0; } console_initcall(omap8250_console_fixup); diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c index 1cc175d..dabc37e 100644 --- a/drivers/uio/uio_pruss.c +++ b/drivers/uio/uio_pruss.c @@ -26,14 +26,22 @@ #include #include #include +#include +#ifdef CONFIG_ARCH_DAVINCI_DA850 #include +#else +#include +#endif #define DRV_NAME "pruss_uio" #define DRV_VERSION "1.0" +#ifdef CONFIG_ARCH_DAVINCI_DA850 static int sram_pool_sz = SZ_16K; module_param(sram_pool_sz, int, 0); -MODULE_PARM_DESC(sram_pool_sz, "sram pool size to allocate "); +MODULE_PARM_DESC(sram_pool_sz, "sram pool size to allocate"); +#endif + static int extram_pool_sz = SZ_256K; module_param(extram_pool_sz, int, 0); @@ -61,22 +69,23 @@ MODULE_PARM_DESC(extram_pool_sz, "external ram pool size to allocate"); #define PINTC_HIER 0x1500 struct uio_pruss_dev { - struct uio_info *info; - struct clk *pruss_clk; - dma_addr_t sram_paddr; + struct uio_info info[MAX_PRUSS_EVT]; dma_addr_t ddr_paddr; void __iomem *prussio_vaddr; - unsigned long sram_vaddr; void *ddr_vaddr; - unsigned int hostirq_start; unsigned int pintc_base; +#ifdef CONFIG_ARCH_DAVINCI_DA850 + struct clk *pruss_clk; struct gen_pool *sram_pool; + dma_addr_t sram_paddr; + unsigned long sram_vaddr; +#endif }; static irqreturn_t pruss_handler(int irq, struct uio_info *info) { struct uio_pruss_dev *gdev = info->priv; - int intr_bit = (irq - gdev->hostirq_start + 2); + int intr_bit = 2 + (info - gdev->info); int val, intr_mask = (1 << intr_bit); void __iomem *base = gdev->prussio_vaddr + gdev->pintc_base; void __iomem *intren_reg = base + PINTC_HIER; @@ -94,53 +103,50 @@ static irqreturn_t pruss_handler(int irq, struct uio_info *info) static void pruss_cleanup(struct device *dev, struct uio_pruss_dev *gdev) { - int cnt; - struct uio_info *p = gdev->info; + int i; - for (cnt = 0; cnt < MAX_PRUSS_EVT; cnt++, p++) { - uio_unregister_device(p); - kfree(p->name); + for (i = 0; i < MAX_PRUSS_EVT; i++) { + uio_unregister_device(&gdev->info[i]); + kfree(gdev->info[i].name); } iounmap(gdev->prussio_vaddr); if (gdev->ddr_vaddr) { dma_free_coherent(dev, extram_pool_sz, gdev->ddr_vaddr, gdev->ddr_paddr); } +#ifdef CONFIG_ARCH_DAVINCI_DA850 if (gdev->sram_vaddr) gen_pool_free(gdev->sram_pool, gdev->sram_vaddr, sram_pool_sz); - kfree(gdev->info); clk_disable(gdev->pruss_clk); clk_put(gdev->pruss_clk); +#else + pm_runtime_put(dev); + pm_runtime_disable(dev); +#endif kfree(gdev); } static int pruss_probe(struct platform_device *pdev) { - struct uio_info *p; struct uio_pruss_dev *gdev; struct resource *regs_prussio; struct device *dev = &pdev->dev; - int ret, cnt, i, len; + int ret, i, len; struct uio_pruss_pdata *pdata = dev_get_platdata(dev); gdev = kzalloc(sizeof(struct uio_pruss_dev), GFP_KERNEL); if (!gdev) return -ENOMEM; - gdev->info = kcalloc(MAX_PRUSS_EVT, sizeof(*p), GFP_KERNEL); - if (!gdev->info) { - ret = -ENOMEM; - goto err_free_gdev; - } - +#ifdef CONFIG_ARCH_DAVINCI_DA850 /* Power on PRU in case its not done as part of boot-loader */ gdev->pruss_clk = clk_get(dev, "pruss"); if (IS_ERR(gdev->pruss_clk)) { dev_err(dev, "Failed to get clock\n"); ret = PTR_ERR(gdev->pruss_clk); - goto err_free_info; + goto err_free_gdev; } ret = clk_enable(gdev->pruss_clk); @@ -148,6 +154,15 @@ static int pruss_probe(struct platform_device *pdev) dev_err(dev, "Failed to enable clock\n"); goto err_clk_put; } +#else + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + dev_err(dev, "pm_runtime_get_sync() failed\n"); + pm_runtime_disable(dev); + goto err_free_gdev; + } +#endif regs_prussio = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs_prussio) { @@ -162,6 +177,18 @@ static int pruss_probe(struct platform_device *pdev) goto err_clk_disable; } + if (dev->of_node) { + ret = of_property_read_u32(dev->of_node, + "ti,pintc-offset", + &gdev->pintc_base); + if (ret < 0) { + dev_err(dev, "Can't parse ti,pintc-offset property\n"); + goto err_clk_disable; + } + } else + gdev->pintc_base = pdata->pintc_base; + +#ifdef CONFIG_ARCH_DAVINCI_DA850 if (pdata->sram_pool) { gdev->sram_pool = pdata->sram_pool; gdev->sram_vaddr = @@ -173,9 +200,10 @@ static int pruss_probe(struct platform_device *pdev) goto err_clk_disable; } } +#endif gdev->ddr_vaddr = dma_alloc_coherent(dev, extram_pool_sz, - &(gdev->ddr_paddr), GFP_KERNEL | GFP_DMA); + &gdev->ddr_paddr, GFP_KERNEL | GFP_DMA); if (!gdev->ddr_vaddr) { dev_err(dev, "Could not allocate external memory\n"); ret = -ENOMEM; @@ -185,32 +213,48 @@ static int pruss_probe(struct platform_device *pdev) len = resource_size(regs_prussio); gdev->prussio_vaddr = ioremap(regs_prussio->start, len); if (!gdev->prussio_vaddr) { - dev_err(dev, "Can't remap PRUSS I/O address range\n"); + dev_err(dev, "Can't remap PRUSS I/O address range\n"); ret = -ENOMEM; goto err_free_ddr_vaddr; } - gdev->pintc_base = pdata->pintc_base; - gdev->hostirq_start = platform_get_irq(pdev, 0); + for (i = 0; i < MAX_PRUSS_EVT; i++) { + struct uio_info *p = &gdev->info[i]; - for (cnt = 0, p = gdev->info; cnt < MAX_PRUSS_EVT; cnt++, p++) { + p->mem[0].name = "pruss"; p->mem[0].addr = regs_prussio->start; p->mem[0].size = resource_size(regs_prussio); p->mem[0].memtype = UIO_MEM_PHYS; + /* note: some userspace code uses hardcoded mem indices... */ +#ifdef CONFIG_ARCH_DAVINCI_DA850 + p->mem[1].name = "sram"; p->mem[1].addr = gdev->sram_paddr; p->mem[1].size = sram_pool_sz; p->mem[1].memtype = UIO_MEM_PHYS; + p->mem[2].name = "ddr"; p->mem[2].addr = gdev->ddr_paddr; p->mem[2].size = extram_pool_sz; p->mem[2].memtype = UIO_MEM_PHYS; +#else + p->mem[1].name = "ddr"; + p->mem[1].addr = gdev->ddr_paddr; + p->mem[1].size = extram_pool_sz; + p->mem[1].memtype = UIO_MEM_PHYS; +#endif - p->name = kasprintf(GFP_KERNEL, "pruss_evt%d", cnt); + ret = platform_get_irq(pdev, i); + if (ret < 0) { + dev_err(dev, "Failed to obtain irq %d (%d)\n", i, ret); + goto err_unloop; + } + + p->name = kasprintf(GFP_KERNEL, "pruss_evt%d", i); p->version = DRV_VERSION; /* Register PRUSS IRQ lines */ - p->irq = gdev->hostirq_start + cnt; + p->irq = ret; p->handler = pruss_handler; p->priv = gdev; @@ -225,23 +269,27 @@ static int pruss_probe(struct platform_device *pdev) return 0; err_unloop: - for (i = 0, p = gdev->info; i < cnt; i++, p++) { - uio_unregister_device(p); - kfree(p->name); + while( --i >= 0 ) { + uio_unregister_device(&gdev->info[i]); + kfree(gdev->info[i].name); } iounmap(gdev->prussio_vaddr); err_free_ddr_vaddr: dma_free_coherent(dev, extram_pool_sz, gdev->ddr_vaddr, gdev->ddr_paddr); err_free_sram: +#ifdef CONFIG_ARCH_DAVINCI_DA850 if (pdata->sram_pool) gen_pool_free(gdev->sram_pool, gdev->sram_vaddr, sram_pool_sz); err_clk_disable: clk_disable(gdev->pruss_clk); err_clk_put: clk_put(gdev->pruss_clk); -err_free_info: - kfree(gdev->info); +#else +err_clk_disable: + pm_runtime_put(dev); + pm_runtime_disable(dev); +#endif err_free_gdev: kfree(gdev); @@ -256,11 +304,19 @@ static int pruss_remove(struct platform_device *dev) return 0; } +static const struct of_device_id pruss_dt_ids[] = { + { .compatible = "ti,pruss-v1" }, + { .compatible = "ti,pruss-v2" }, + {}, +}; +MODULE_DEVICE_TABLE(of, pruss_dt_ids); + static struct platform_driver pruss_driver = { .probe = pruss_probe, .remove = pruss_remove, .driver = { .name = DRV_NAME, + .of_match_table = pruss_dt_ids, }, }; diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 70e6c95..6a34e09 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -45,6 +45,7 @@ config USB tristate "Support for Host-side USB" depends on USB_ARCH_HAS_HCD select USB_COMMON + select POWER_SEQUENCE select NLS # for UTF-8 strings ---help--- Universal Serial Bus (USB) is a specification for a serial bus diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 1d1e61e..4c440a3 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -1669,6 +1670,7 @@ static void hub_disconnect(struct usb_interface *intf) hub->error = 0; hub_quiesce(hub, HUB_DISCONNECT); + of_pwrseq_off_list(&hub->pwrseq_on_list); mutex_lock(&usb_port_peer_mutex); /* Avoid races with recursively_mark_NOTATTACHED() */ @@ -1715,11 +1717,41 @@ static bool hub_descriptor_is_sane(struct usb_host_interface *desc) return true; } +#ifdef CONFIG_OF +static int hub_of_pwrseq_on(struct usb_hub *hub) +{ + struct device *parent; + struct usb_device *hdev = hub->hdev; + struct device_node *np; + int ret; + + if (hdev->parent) + parent = &hdev->dev; + else + parent = bus_to_hcd(hdev->bus)->self.sysdev; + + for_each_child_of_node(parent->of_node, np) { + ret = of_pwrseq_on_list(np, &hub->pwrseq_on_list); + /* Maybe no power sequence library is chosen */ + if (ret && ret != -ENOENT) + return ret; + } + + return 0; +} +#else +static int hub_of_pwrseq_on(struct usb_hub *hub) +{ + return 0; +} +#endif + static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_host_interface *desc; struct usb_device *hdev; struct usb_hub *hub; + int ret = -ENODEV; desc = intf->cur_altsetting; hdev = interface_to_usbdev(intf); @@ -1810,6 +1842,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) INIT_DELAYED_WORK(&hub->leds, led_work); INIT_DELAYED_WORK(&hub->init_work, NULL); INIT_WORK(&hub->events, hub_event); + INIT_LIST_HEAD(&hub->pwrseq_on_list); usb_get_intf(intf); usb_get_dev(hdev); @@ -1823,11 +1856,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND) hub->quirk_check_port_auto_suspend = 1; - if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) - return 0; + if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) { + ret = hub_of_pwrseq_on(hub); + if (!ret) + return 0; + } hub_disconnect(intf); - return -ENODEV; + return ret; } static int @@ -3680,7 +3716,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) /* stop hub_wq and related activity */ hub_quiesce(hub, HUB_SUSPEND); - return 0; + return pwrseq_suspend_list(&hub->pwrseq_on_list); } /* Report wakeup requests from the ports of a resuming root hub */ @@ -3720,8 +3756,13 @@ static void report_wakeup_requests(struct usb_hub *hub) static int hub_resume(struct usb_interface *intf) { struct usb_hub *hub = usb_get_intfdata(intf); + int ret; dev_dbg(&intf->dev, "%s\n", __func__); + ret = pwrseq_resume_list(&hub->pwrseq_on_list); + if (ret) + return ret; + hub_activate(hub, HUB_RESUME); /* diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 4accfb6..6349cc6 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -70,6 +70,7 @@ struct usb_hub { struct delayed_work init_work; struct work_struct events; struct usb_port **ports; + struct list_head pwrseq_on_list; /* powered pwrseq node list */ }; /** diff --git b/include/dt-bindings/board/am335x-bbw-bbb-base.h b/include/dt-bindings/board/am335x-bbw-bbb-base.h new file mode 100644 index 0000000..35f6d57 --- /dev/null +++ b/include/dt-bindings/board/am335x-bbw-bbb-base.h @@ -0,0 +1,103 @@ +/* + * This header provides constants for bbw/bbb pinctrl bindings. + * + * Copyright (C) 2014 Robert Nelson + * + * Numbers Based on: https://github.com/derekmolloy/boneDeviceTree/tree/master/docs + */ + +#ifndef _DT_BINDINGS_BOARD_AM335X_BBW_BBB_BASE_H +#define _DT_BINDINGS_BOARD_AM335X_BBW_BBB_BASE_H + +#define BONE_P8_03 0x018 +#define BONE_P8_04 0x01C + +#define BONE_P8_05 0x008 +#define BONE_P8_06 0x00C +#define BONE_P8_07 0x090 +#define BONE_P8_08 0x094 + +#define BONE_P8_09 0x09C +#define BONE_P8_10 0x098 +#define BONE_P8_11 0x034 +#define BONE_P8_12 0x030 + +#define BONE_P8_13 0x024 +#define BONE_P8_14 0x028 +#define BONE_P8_15 0x03C +#define BONE_P8_16 0x038 + +#define BONE_P8_17 0x02C +#define BONE_P8_18 0x08C +#define BONE_P8_19 0x020 +#define BONE_P8_20 0x084 + +#define BONE_P8_21 0x080 +#define BONE_P8_22 0x014 +#define BONE_P8_23 0x010 +#define BONE_P8_24 0x004 + +#define BONE_P8_25 0x000 +#define BONE_P8_26 0x07C +#define BONE_P8_27 0x0E0 +#define BONE_P8_28 0x0E8 + +#define BONE_P8_29 0x0E4 +#define BONE_P8_30 0x0EC +#define BONE_P8_31 0x0D8 +#define BONE_P8_32 0x0DC + +#define BONE_P8_33 0x0D4 +#define BONE_P8_34 0x0CC +#define BONE_P8_35 0x0D0 +#define BONE_P8_36 0x0C8 + +#define BONE_P8_37 0x0C0 +#define BONE_P8_38 0x0C4 +#define BONE_P8_39 0x0B8 +#define BONE_P8_40 0x0BC + +#define BONE_P8_41 0x0B0 +#define BONE_P8_42 0x0B4 +#define BONE_P8_43 0x0A8 +#define BONE_P8_44 0x0AC + +#define BONE_P8_45 0x0A0 +#define BONE_P8_46 0x0A4 + +#define BONE_P9_11 0x070 +#define BONE_P9_12 0x078 + +#define BONE_P9_13 0x074 +#define BONE_P9_14 0x048 +#define BONE_P9_15 0x040 +#define BONE_P9_16 0x04C + +#define BONE_P9_17 0x15C +#define BONE_P9_18 0x158 +#define BONE_P9_19 0x17C +#define BONE_P9_20 0x178 + +#define BONE_P9_21 0x154 +#define BONE_P9_22 0x150 +#define BONE_P9_23 0x044 +#define BONE_P9_24 0x184 + +#define BONE_P9_25 0x1AC +#define BONE_P9_26 0x180 +#define BONE_P9_27 0x1A4 +#define BONE_P9_28 0x19C + +#define BONE_P9_29 0x194 +#define BONE_P9_30 0x198 +#define BONE_P9_31 0x190 + +/* Shared P21 of P11 */ +#define BONE_P9_41A 0x1B4 +#define BONE_P9_41B 0x1A8 + +/* Shared P22 of P11 */ +#define BONE_P9_42A 0x164 +#define BONE_P9_42B 0x1A0 + +#endif diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index 4a827af..86dca9e 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -10,6 +10,20 @@ #include +#define STMPE_SAMPLE_TIME(x) ((x & 0xf) << 4) +#define STMPE_MOD_12B(x) ((x & 0x1) << 3) +#define STMPE_REF_SEL(x) ((x & 0x1) << 1) +#define STMPE_ADC_FREQ(x) (x & 0x3) +#define STMPE_AVE_CTRL(x) ((x & 0x3) << 6) +#define STMPE_DET_DELAY(x) ((x & 0x7) << 3) +#define STMPE_SETTLING(x) (x & 0x7) +#define STMPE_FRACTION_Z(x) (x & 0x7) +#define STMPE_I_DRIVE(x) (x & 0x1) +#define STMPE_OP_MODE(x) ((x & 0x7) << 1) + +#define STMPE811_REG_ADC_CTRL1 0x20 +#define STMPE811_REG_ADC_CTRL2 0x21 + struct device; struct regulator; @@ -123,6 +137,12 @@ struct stmpe { u8 ier[2]; u8 oldier[2]; struct stmpe_platform_data *pdata; + + /* For devices that use an ADC */ + u8 sample_time; + u8 mod_12b; + u8 ref_sel; + u8 adc_freq; }; extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data); diff --git b/include/linux/power/pwrseq.h b/include/linux/power/pwrseq.h new file mode 100644 index 0000000..cbc344c --- /dev/null +++ b/include/linux/power/pwrseq.h @@ -0,0 +1,81 @@ +#ifndef __LINUX_PWRSEQ_H +#define __LINUX_PWRSEQ_H + +#include + +#define PWRSEQ_MAX_CLKS 3 + +/** + * struct pwrseq - the power sequence structure + * @pwrseq_of_match_table: the OF device id table this pwrseq library supports + * @node: the list pointer to be added to pwrseq list + * @get: the API is used to get pwrseq instance from the device node + * @on: do power on for this pwrseq instance + * @off: do power off for this pwrseq instance + * @put: release the resources on this pwrseq instance + * @suspend: do suspend operation on this pwrseq instance + * @resume: do resume operation on this pwrseq instance + * @used: this pwrseq instance is used by device + */ +struct pwrseq { + const struct of_device_id *pwrseq_of_match_table; + struct list_head node; + int (*get)(struct device_node *np, struct pwrseq *p); + int (*on)(struct pwrseq *p); + void (*off)(struct pwrseq *p); + void (*put)(struct pwrseq *p); + int (*suspend)(struct pwrseq *p); + int (*resume)(struct pwrseq *p); + bool used; + bool suspended; +}; + +/* used for power sequence instance list in one driver */ +struct pwrseq_list_per_dev { + struct pwrseq *pwrseq; + struct list_head list; +}; + +#if IS_ENABLED(CONFIG_POWER_SEQUENCE) +void pwrseq_register(struct pwrseq *pwrseq); +void pwrseq_unregister(struct pwrseq *pwrseq); +struct pwrseq *of_pwrseq_on(struct device_node *np); +void of_pwrseq_off(struct pwrseq *pwrseq); +int of_pwrseq_on_list(struct device_node *np, struct list_head *head); +void of_pwrseq_off_list(struct list_head *head); +int pwrseq_suspend(struct pwrseq *p); +int pwrseq_resume(struct pwrseq *p); +int pwrseq_suspend_list(struct list_head *head); +int pwrseq_resume_list(struct list_head *head); +#else +static inline void pwrseq_register(struct pwrseq *pwrseq) {} +static inline void pwrseq_unregister(struct pwrseq *pwrseq) {} +static inline struct pwrseq *of_pwrseq_on(struct device_node *np) +{ + return NULL; +} +static void of_pwrseq_off(struct pwrseq *pwrseq) {} +static int of_pwrseq_on_list(struct device_node *np, struct list_head *head) +{ + return 0; +} +static void of_pwrseq_off_list(struct list_head *head) {} +static int pwrseq_suspend(struct pwrseq *p) +{ + return 0; +} +static int pwrseq_resume(struct pwrseq *p) +{ + return 0; +} +static int pwrseq_suspend_list(struct list_head *head) +{ + return 0; +} +static int pwrseq_resume_list(struct list_head *head) +{ + return 0; +} +#endif /* CONFIG_POWER_SEQUENCE */ + +#endif /* __LINUX_PWRSEQ_H */ diff --git a/lib/Kconfig b/lib/Kconfig index a9965f4..fcb0530 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -10,6 +10,14 @@ menu "Library routines" config RAID6_PQ tristate +config RAID6_PQ_BENCHMARK + bool "Automatically choose fastest RAID6 PQ functions" + depends on RAID6_PQ + default y + help + Benchmark all available RAID6 PQ functions on init and choose the + fastest one. + config BITREVERSE tristate diff --git a/lib/raid6/algos.c b/lib/raid6/algos.c index 5065b1e..7e4f7a8 100644 --- a/lib/raid6/algos.c +++ b/lib/raid6/algos.c @@ -34,64 +34,64 @@ struct raid6_calls raid6_call; EXPORT_SYMBOL_GPL(raid6_call); const struct raid6_calls * const raid6_algos[] = { -#if defined(__ia64__) - &raid6_intx16, - &raid6_intx32, -#endif #if defined(__i386__) && !defined(__arch_um__) - &raid6_mmxx1, - &raid6_mmxx2, - &raid6_sse1x1, - &raid6_sse1x2, - &raid6_sse2x1, - &raid6_sse2x2, -#ifdef CONFIG_AS_AVX2 - &raid6_avx2x1, - &raid6_avx2x2, -#endif #ifdef CONFIG_AS_AVX512 - &raid6_avx512x1, &raid6_avx512x2, + &raid6_avx512x1, #endif -#endif -#if defined(__x86_64__) && !defined(__arch_um__) - &raid6_sse2x1, - &raid6_sse2x2, - &raid6_sse2x4, #ifdef CONFIG_AS_AVX2 - &raid6_avx2x1, &raid6_avx2x2, - &raid6_avx2x4, + &raid6_avx2x1, +#endif + &raid6_sse2x2, + &raid6_sse2x1, + &raid6_sse1x2, + &raid6_sse1x1, + &raid6_mmxx2, + &raid6_mmxx1, #endif +#if defined(__x86_64__) && !defined(__arch_um__) #ifdef CONFIG_AS_AVX512 - &raid6_avx512x1, - &raid6_avx512x2, &raid6_avx512x4, + &raid6_avx512x2, + &raid6_avx512x1, #endif +#ifdef CONFIG_AS_AVX2 + &raid6_avx2x4, + &raid6_avx2x2, + &raid6_avx2x1, +#endif + &raid6_sse2x4, + &raid6_sse2x2, + &raid6_sse2x1, #endif #ifdef CONFIG_ALTIVEC - &raid6_altivec1, - &raid6_altivec2, - &raid6_altivec4, - &raid6_altivec8, - &raid6_vpermxor1, - &raid6_vpermxor2, - &raid6_vpermxor4, &raid6_vpermxor8, + &raid6_vpermxor4, + &raid6_vpermxor2, + &raid6_vpermxor1, + &raid6_altivec8, + &raid6_altivec4, + &raid6_altivec2, + &raid6_altivec1, #endif #if defined(CONFIG_S390) &raid6_s390vx8, #endif - &raid6_intx1, - &raid6_intx2, - &raid6_intx4, - &raid6_intx8, #ifdef CONFIG_KERNEL_MODE_NEON - &raid6_neonx1, - &raid6_neonx2, - &raid6_neonx4, &raid6_neonx8, + &raid6_neonx4, + &raid6_neonx2, + &raid6_neonx1, #endif +#if defined(__ia64__) + &raid6_intx32, + &raid6_intx16, +#endif + &raid6_intx8, + &raid6_intx4, + &raid6_intx2, + &raid6_intx1, NULL }; @@ -163,6 +163,11 @@ static inline const struct raid6_calls *raid6_choose_gen( if ((*algo)->valid && !(*algo)->valid()) continue; + if (!IS_ENABLED(CONFIG_RAID6_PQ_BENCHMARK)) { + best = *algo; + break; + } + perf = 0; preempt_disable(); diff --git a/samples/seccomp/Makefile b/samples/seccomp/Makefile index cf34ff6..4c2038b 100644 --- a/samples/seccomp/Makefile +++ b/samples/seccomp/Makefile @@ -18,6 +18,7 @@ bpf-direct-objs := bpf-direct.o # Try to match the kernel target. ifndef CONFIG_64BIT +ifndef CONFIG_ARM # s390 has -m31 flag to build 31 bit binaries ifndef CONFIG_S390 @@ -36,3 +37,4 @@ HOSTLDLIBS_dropper += $(MFLAG) endif always := $(hostprogs-m) endif +endif