diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 2ecc712..e026391 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -24,6 +24,8 @@ Optional properties: - ti,no-reset-on-init: When present, the module should not be reset at init - ti,no-idle-on-init: When present, the module should not be idled at init - ti,no-idle: When present, the module is never allowed to idle. +- ti,deassert-hard-reset: list of hwmod and hardware reset line name pairs + (ascii strings) to be deasserted upon device instantiation. Example: diff --git b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt new file mode 100644 index 0000000..480e664 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt @@ -0,0 +1,21 @@ +STMPE ADC driver +---------------- + +Required properties: + - compatible: "st,stmpe-adc" + +Optional properties: +Note that the ADC is shared with the STMPE touchscreen. ADC related settings +have to be done in the mfd. +- st,norequest-mask: bitmask specifying which ADC channels should _not_ be + requestable due to different usage (e.g. touch) + +Node name must be stmpe_adc and should be child node of stmpe node to +which it belongs. + +Example: + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */ + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt index 127baa3..4145865 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt @@ -5,36 +5,52 @@ Required properties: - compatible: "st,stmpe-ts" Optional properties: -- st,sample-time: ADC converstion time in number of clock. (0 -> 36 clocks, 1 -> - 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6 - -> 144 clocks), recommended is 4. -- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) -- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external - reference) -- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) -- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 - samples, 3 -> 8 samples) -- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 -> - 100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended - is 3 -- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 - -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2 -- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of - the fractional part) recommended is 7 -- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35 - mA max, 1 -> 50 mA typical 80 mA max) +- st,ave-ctrl : Sample average control + 0 -> 1 sample + 1 -> 2 samples + 2 -> 4 samples + 3 -> 8 samples +- st,touch-det-delay : Touch detect interrupt delay (recommended is 3) + 0 -> 10 us 5 -> 5 ms + 1 -> 50 us 6 -> 10 ms + 2 -> 100 us 7 -> 50 ms + 3 -> 500 us + 4-> 1 ms +- st,settling : Panel driver settling time (recommended is 2) + 0 -> 10 us 5 -> 10 ms + 1 -> 100 us 6 for 50 ms + 2 -> 500 us 7 -> 100 ms + 3 -> 1 ms + 4 -> 5 ms +- st,fraction-z : Length of the fractional part in z (recommended is 7) + (fraction-z ([0..7]) = Count of the fractional part) +- st,i-drive : current limit value of the touchscreen drivers + 0 -> 20 mA (typical 35mA max) + 1 -> 50 mA (typical 80 mA max) + +Optional properties common with MFD (deprecated): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks 4 -> 80 clocks (recommended) + 1 -> 44 clocks 5 -> 96 clocks + 2 -> 56 clocks 6 -> 124 clocks + 3 -> 64 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz + 1 -> 3.25 MHz Node name must be stmpe_touchscreen and should be child node of stmpe node to which it belongs. +Note that common ADC settings of stmpe_touchscreen will take precedence. + Example: stmpe_touchscreen { compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; st,ave-ctrl = <1>; st,touch-det-delay = <2>; st,settling = <2>; diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt index c797c05..d4408a4 100644 --- a/Documentation/devicetree/bindings/mfd/stmpe.txt +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt @@ -4,15 +4,29 @@ STMPE is an MFD device which may expose the following inbuilt devices: gpio, keypad, touchscreen, adc, pwm, rotator. Required properties: - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" - - reg : I2C/SPI address of the device + - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" + - reg : I2C/SPI address of the device Optional properties: - - interrupts : The interrupt outputs from the controller - - interrupt-controller : Marks the device node as an interrupt controller - - wakeup-source : Marks the input device as wakable - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - - irq-gpio : If present, which GPIO to use for event IRQ + - interrupts : The interrupt outputs from the controller + - interrupt-controller : Marks the device node as an interrupt controller + - wakeup-source : Marks the input device as wakable + - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 + - irq-gpio : If present, which GPIO to use for event IRQ + +Optional properties for devices with touch and ADC (STMPE811|STMPE610): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks 4 -> 80 clocks (recommended) + 1 -> 44 clocks 5 -> 96 clocks + 2 -> 56 clocks 6 -> 124 clocks + 3 -> 64 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz + 1 -> 3.25 MHz Example: diff --git b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt new file mode 100644 index 0000000..ebf0d47 --- /dev/null +++ b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt @@ -0,0 +1,48 @@ +The generic power sequence library + +Some hard-wired devices (eg USB/MMC) need to do power sequence before +the device can be enumerated on the bus, the typical power sequence +like: enable USB PHY clock, toggle reset pin, etc. But current +Linux device driver lacks of such code to do it, it may cause some +hard-wired devices works abnormal or can't be recognized by +controller at all. The power sequence will be done before this device +can be found at the bus. + +The power sequence properties is under the device node. + +Optional properties: +- clocks: the input clocks for device. +- reset-gpios: Should specify the GPIO for reset. +- reset-duration-us: the duration in microsecond for assert reset signal. + +Below is the example of USB power sequence properties on USB device +nodes which have two level USB hubs. + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + genesys: hub@1 { + compatible = "usb5e3,608"; + reg = <1>; + + clocks = <&clks IMX6SX_CLK_CKO>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */ + reset-duration-us = <10>; + + #address-cells = <1>; + #size-cells = <0>; + asix: ethernet@1 { + compatible = "usbb95,1708"; + reg = <1>; + + clocks = <&clks IMX6SX_CLK_IPG>; + reset-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* ethernet_rst */ + reset-duration-us = <15>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index 036be17..cb85f82 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -65,6 +65,9 @@ Required properties for host-controller nodes with device nodes: - #address-cells: shall be 1 - #size-cells: shall be 0 +Optional properties: +power sequence properties, see +Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt for detail Example: @@ -72,9 +75,13 @@ Example: #address-cells = <1>; #size-cells = <0>; - hub@1 { /* hub connected to port 1 */ + genesys: hub@1 { /* hub connected to port 1 */ compatible = "usb5e3,608"; reg = <1>; + + clocks = <&clks IMX6SX_CLK_CKO>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */ + reset-duration-us = <10>; }; device@2 { /* device connected to port 2 */ diff --git b/Documentation/power/power-sequence/design.rst b/Documentation/power/power-sequence/design.rst new file mode 100644 index 0000000..554608e --- /dev/null +++ b/Documentation/power/power-sequence/design.rst @@ -0,0 +1,54 @@ +==================================== +Power Sequence Library +==================================== + +:Date: Feb, 2017 +:Author: Peter Chen + + +Introduction +============ + +We have an well-known problem that the device needs to do a power +sequence before it can be recognized by related host, the typical +examples are hard-wired mmc devices and usb devices. The host controller +can't know what kinds of this device is in its bus if the power +sequence has not done, since the related devices driver's probe calling +is determined by runtime according to eunumeration results. Besides, +the devices may have custom power sequence, so the power sequence library +which is independent with the devices is needed. + +Design +============ + +The power sequence library includes the core file and customer power +sequence library. The core file exports interfaces are called by +host controller driver for power sequence and customer power sequence +library files to register its power sequence instance to global +power sequence list. The custom power sequence library creates power +sequence instance and implement custom power sequence. + +Since the power sequence describes hardware design, the description is +located at board description file, eg, device tree dts file. And +a specific power sequence belongs to device, so its description +is under the device node, please refer to: +Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt + +Custom power sequence library allocates one power sequence instance at +bootup periods using postcore_initcall, this static allocated instance is +used to compare with device-tree (DT) node to see if this library can be +used for the node or not. When the result is matched, the core API will +try to get resourses (->get, implemented at each library) for power +sequence, if all resources are got, it will try to allocate another +instance for next possible request from host driver. + +Then, the host controller driver can carry out power sequence on for this +DT node, the library will do corresponding operations, like open clocks, +toggle gpio, etc. The power sequence off routine will close and free the +resources, and is called when the parent is removed. And the power +sequence suspend and resume routine can be called at host driver's +suspend and resume routine if needed. + +The exported interfaces +.. kernel-doc:: drivers/power/pwrseq/core.c + :export: diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt index 8fbf0aa..72db8dd 100644 --- a/Documentation/pwm.txt +++ b/Documentation/pwm.txt @@ -85,9 +85,11 @@ will find: The PWM channels are numbered using a per-chip index from 0 to npwm-1. -When a PWM channel is exported a pwmX directory will be created in the +When a PWM channel is exported a pwm-N:X directory will be created in the pwmchipN directory it is associated with, where X is the number of the -channel that was exported. The following properties will then be available: +channel that was exported. It will also be exposed at /sys/class/pwm/ and +can be identified by the pwm_channel device type. +The following properties will then be available: period The total period of the PWM signal (read/write). diff --git a/MAINTAINERS b/MAINTAINERS index 9e9b19e..d60b50b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11641,6 +11641,15 @@ F: drivers/firmware/psci*.c F: include/linux/psci.h F: include/uapi/linux/psci.h +POWER SEQUENCE LIBRARY +M: Peter Chen +T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git +L: linux-pm@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/power/pwrseq/ +F: drivers/power/pwrseq/ +F: include/linux/power/pwrseq.h + POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS M: Sebastian Reichel L: linux-pm@vger.kernel.org diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index a3af4dc..5e9c1d6 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -29,6 +29,10 @@ export ZRELADDR INITRD_PHYS PARAMS_PHYS targets := Image zImage xipImage bootpImage uImage +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + ifeq ($(CONFIG_XIP_KERNEL),y) cmd_deflate_xip_data = $(CONFIG_SHELL) -c \ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de..7f6770b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,4 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 + +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + dtb-$(CONFIG_ARCH_ALPINE) += \ alpine-db.dtb dtb-$(CONFIG_MACH_ARTPEC6) += \ @@ -450,6 +455,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-b650v3.dtb \ imx6q-b850v3.dtb \ imx6q-cm-fx6.dtb \ + imx6q-ccimx6sbc.dtb \ imx6q-cubox-i.dtb \ imx6q-cubox-i-emmc-som-v15.dtb \ imx6q-cubox-i-som-v15.dtb \ @@ -547,6 +553,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-udoo-neo-full.dtb dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ + imx6ul-14x14-evk-ism43362-b81-evb.dtb \ imx6ul-ccimx6ulsbcexpress.dtb \ imx6ul-geam.dtb \ imx6ul-isiot-emmc.dtb \ @@ -696,6 +703,16 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-bonegreen-wireless-uboot-univ.dtb \ + am335x-boneblack-uboot-univ.dtb \ + am335x-bone-uboot-univ.dtb \ + am335x-boneblack-audio.dtb \ + am335x-boneblack-bbb-exp-r.dtb \ + am335x-boneblack-bbb-exp-c.dtb \ + am335x-boneblack-bbbmini.dtb \ + am335x-boneblack-wl1835mod.dtb \ + am335x-abbbi.dtb \ + am335x-boneblack-uboot.dtb \ am335x-boneblack-wireless.dtb \ am335x-boneblue.dtb \ am335x-bonegreen.dtb \ @@ -725,6 +742,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ + omap4-panda-es-b3.dtb \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ diff --git b/arch/arm/boot/dts/am335x-abbbi.dts b/arch/arm/boot/dts/am335x-abbbi.dts new file mode 100644 index 0000000..6d5339c --- /dev/null +++ b/arch/arm/boot/dts/am335x-abbbi.dts @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright 2015 Konsulko Group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + + +/ { + model = "Arrow BeagleBone Black Industrial"; + compatible = "arrow,am335x-abbbi", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + adi_hdmi_bbbi_pins: adi_hdmi_bbbi_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; +}; + +&lcdc { + status = "okay"; + + /* If you want to get 24 bit RGB and 16 BGR mode instead of + * current 16 bit RGB and 24 BGR modes, set the propety + * below to "crossed" and uncomment the video-ports -property + * in tda19988 node. + */ + blue-and-red-wiring = "straight"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + adv7511: adv7511@39 { + compatible = "adi,adv7511"; + reg = <0x39>; + + pinctrl-names = "default"; + pinctrl-0 = <&adi_hdmi_bbbi_pins>; + + /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ + /* video-ports = <0x234501>; */ + + #sound-dai-cells = <0>; + + ports { + port@0 { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + }; +}; + +&rtc { + system-power-controller; +}; + +&mcasp0 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +/ { + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "TI BeagleBone Black"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&mcasp0>; + clocks = <&clk_mcasp0>; + }; + + simple-audio-card,codec { + sound-dai = <&adv7511>; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi new file mode 100644 index 0000000..65a861c --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi @@ -0,0 +1,375 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + chosen { + stdout-path = &uart0; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led2 { + label = "beaglebone:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led3 { + label = "beaglebone:green:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + }; + + vmmcsd_fixed: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spio0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; + interrupts-extended = <&intc 18 &tps 0>; + interrupt-names = "mc", "vbus"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; +}; + + +/include/ "tps65217.dtsi" + +&tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ + + interrupts = <7>; /* NMI */ + interrupt-parent = <&intc>; + + ti,pmic-shutdown-controller; + + charger { + status = "okay"; + }; + + pwrbutton { + status = "okay"; + }; + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1351500>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; + +&rtc { + clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clock-names = "ext-clk", "int-clk"; + system-power-controller; +}; diff --git b/arch/arm/boot/dts/am335x-bone-common-univ.dtsi b/arch/arm/boot/dts/am335x-bone-common-univ.dtsi new file mode 100644 index 0000000..0376839 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-univ.dtsi @@ -0,0 +1,2923 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + + /* P8_02 GND */ + + + /* P8_03 (ZCZ ball R9) emmc */ + P8_03_default_pin: pinmux_P8_03_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_pin: pinmux_P8_03_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_pu_pin: pinmux_P8_03_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_pd_pin: pinmux_P8_03_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_input_pin: pinmux_P8_03_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + + /* P8_04 (ZCZ ball T9) emmc */ + P8_04_default_pin: pinmux_P8_04_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_pin: pinmux_P8_04_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_pu_pin: pinmux_P8_04_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_pd_pin: pinmux_P8_04_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_input_pin: pinmux_P8_04_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + + /* P8_05 (ZCZ ball R8) emmc */ + P8_05_default_pin: pinmux_P8_05_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_pin: pinmux_P8_05_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_pu_pin: pinmux_P8_05_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_pd_pin: pinmux_P8_05_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_input_pin: pinmux_P8_05_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + + /* P8_06 (ZCZ ball T8) emmc */ + P8_06_default_pin: pinmux_P8_06_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_pin: pinmux_P8_06_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_pu_pin: pinmux_P8_06_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_pd_pin: pinmux_P8_06_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_input_pin: pinmux_P8_06_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + + /* P8_07 (ZCZ ball R7) gpio2_2 */ + P8_07_default_pin: pinmux_P8_07_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_pin: pinmux_P8_07_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_pu_pin: pinmux_P8_07_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_pd_pin: pinmux_P8_07_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_input_pin: pinmux_P8_07_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_timer_pin: pinmux_P8_07_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_advn_ale.timer4 */ + + /* P8_08 (ZCZ ball T7) gpio2_3 */ + P8_08_default_pin: pinmux_P8_08_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_pin: pinmux_P8_08_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_pu_pin: pinmux_P8_08_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_pd_pin: pinmux_P8_08_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_input_pin: pinmux_P8_08_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_timer_pin: pinmux_P8_08_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_oen_ren.timer7 */ + + /* P8_09 (ZCZ ball T6) gpio2_5 */ + P8_09_default_pin: pinmux_P8_09_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_pin: pinmux_P8_09_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_pu_pin: pinmux_P8_09_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_pd_pin: pinmux_P8_09_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_input_pin: pinmux_P8_09_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_timer_pin: pinmux_P8_09_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_be0n_cle.timer5 */ + + /* P8_10 (ZCZ ball U6) gpio2_4 */ + P8_10_default_pin: pinmux_P8_10_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_pin: pinmux_P8_10_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_pu_pin: pinmux_P8_10_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_pd_pin: pinmux_P8_10_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_input_pin: pinmux_P8_10_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_timer_pin: pinmux_P8_10_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_wen.timer6 */ + + /* P8_11 (ZCZ ball R12) gpio1_13 */ + P8_11_default_pin: pinmux_P8_11_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_pin: pinmux_P8_11_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_pu_pin: pinmux_P8_11_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_pd_pin: pinmux_P8_11_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_input_pin: pinmux_P8_11_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_qep_pin: pinmux_P8_11_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad13.eqep2b_in */ + P8_11_pruout_pin: pinmux_P8_11_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_ad13.pru0_out15 */ + + /* P8_12 (ZCZ ball T12) gpio1_12 */ + P8_12_default_pin: pinmux_P8_12_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_pin: pinmux_P8_12_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_pu_pin: pinmux_P8_12_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_pd_pin: pinmux_P8_12_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_input_pin: pinmux_P8_12_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_qep_pin: pinmux_P8_12_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad12.eqep2a_in */ + P8_12_pruout_pin: pinmux_P8_12_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_ad12.pru0_out14 */ + + /* P8_13 (ZCZ ball T10) gpio0_23 */ + P8_13_default_pin: pinmux_P8_13_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_pin: pinmux_P8_13_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_pu_pin: pinmux_P8_13_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_pd_pin: pinmux_P8_13_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_input_pin: pinmux_P8_13_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_pwm_pin: pinmux_P8_13_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad9.ehrpwm2b */ + + /* P8_14 (ZCZ ball T11) gpio0_26 */ + P8_14_default_pin: pinmux_P8_14_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P8_14_gpio_pin: pinmux_P8_14_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P8_14_gpio_pu_pin: pinmux_P8_14_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P8_14_gpio_pd_pin: pinmux_P8_14_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P8_14_gpio_input_pin: pinmux_P8_14_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P8_14_pwm_pin: pinmux_P8_14_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad10.ehrpwm2_tripzone_input */ + + /* P8_15 (ZCZ ball U13) gpio1_15 */ + P8_15_default_pin: pinmux_P8_15_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_pin: pinmux_P8_15_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_input_pin: pinmux_P8_15_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_qep_pin: pinmux_P8_15_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad15.eqep2_strobe */ + P8_15_pru_ecap_pin: pinmux_P8_15_pru_ecap_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_ad15.pr1_ecap0_ecap_capin_apwm_o */ + P8_15_pruin_pin: pinmux_P8_15_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_ad15.pru0_in15 */ + + /* P8_16 (ZCZ ball V13) gpio1_14 */ + P8_16_default_pin: pinmux_P8_16_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_pin: pinmux_P8_16_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_pu_pin: pinmux_P8_16_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_pd_pin: pinmux_P8_16_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_input_pin: pinmux_P8_16_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_qep_pin: pinmux_P8_16_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad14.eqep2_index */ + P8_16_pruin_pin: pinmux_P8_16_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_ad14.pru0_in14 */ + + /* P8_17 (ZCZ ball U12) gpio0_27 */ + P8_17_default_pin: pinmux_P8_17_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P8_17_gpio_pin: pinmux_P8_17_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P8_17_gpio_pu_pin: pinmux_P8_17_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P8_17_gpio_pd_pin: pinmux_P8_17_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P8_17_gpio_input_pin: pinmux_P8_17_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P8_17_pwm_pin: pinmux_P8_17_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad11.ehrpwm0_synco */ + + /* P8_18 (ZCZ ball V12) gpio2_1 */ + P8_18_default_pin: pinmux_P8_18_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_pin: pinmux_P8_18_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_pu_pin: pinmux_P8_18_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_pd_pin: pinmux_P8_18_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_input_pin: pinmux_P8_18_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + + /* P8_19 (ZCZ ball U10) gpio0_22 */ + P8_19_default_pin: pinmux_P8_19_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_pin: pinmux_P8_19_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_pu_pin: pinmux_P8_19_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_pd_pin: pinmux_P8_19_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_input_pin: pinmux_P8_19_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_pwm_pin: pinmux_P8_19_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad8.ehrpwm2a */ + + /* P8_20 (ZCZ ball V9) emmc */ + P8_20_default_pin: pinmux_P8_20_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_pin: pinmux_P8_20_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_pu_pin: pinmux_P8_20_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_pd_pin: pinmux_P8_20_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_input_pin: pinmux_P8_20_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_pruout_pin: pinmux_P8_20_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_csn2.pru1_out13 */ + P8_20_pruin_pin: pinmux_P8_20_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_csn2.pru1_in13 */ + + /* P8_21 (ZCZ ball U9) emmc */ + P8_21_default_pin: pinmux_P8_21_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_pin: pinmux_P8_21_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_pu_pin: pinmux_P8_21_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_pd_pin: pinmux_P8_21_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_input_pin: pinmux_P8_21_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_pruout_pin: pinmux_P8_21_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_csn1.pru1_out12 */ + P8_21_pruin_pin: pinmux_P8_21_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_csn1.pru1_in12 */ + + /* P8_22 (ZCZ ball V8) emmc */ + P8_22_default_pin: pinmux_P8_22_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_pin: pinmux_P8_22_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_pu_pin: pinmux_P8_22_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_pd_pin: pinmux_P8_22_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_input_pin: pinmux_P8_22_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + + /* P8_23 (ZCZ ball U8) emmc */ + P8_23_default_pin: pinmux_P8_23_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_pin: pinmux_P8_23_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_pu_pin: pinmux_P8_23_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_pd_pin: pinmux_P8_23_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_input_pin: pinmux_P8_23_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + + /* P8_24 (ZCZ ball V7) emmc */ + P8_24_default_pin: pinmux_P8_24_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_pin: pinmux_P8_24_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_pu_pin: pinmux_P8_24_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_pd_pin: pinmux_P8_24_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_input_pin: pinmux_P8_24_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + + /* P8_25 (ZCZ ball U7) emmc */ + P8_25_default_pin: pinmux_P8_25_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_pin: pinmux_P8_25_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_pu_pin: pinmux_P8_25_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_pd_pin: pinmux_P8_25_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_input_pin: pinmux_P8_25_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + + /* P8_26 (ZCZ ball V6) gpio1_29 */ + P8_26_default_pin: pinmux_P8_26_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x087c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn0.gpio1_29 */ + P8_26_gpio_pin: pinmux_P8_26_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x087c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn0.gpio1_29 */ + P8_26_gpio_pu_pin: pinmux_P8_26_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x087c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn0.gpio1_29 */ + P8_26_gpio_pd_pin: pinmux_P8_26_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x087c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn0.gpio1_29 */ + P8_26_gpio_input_pin: pinmux_P8_26_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x087c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_csn0.gpio1_29 */ + + /* P8_27 (ZCZ ball U5) hdmi */ + P8_27_default_pin: pinmux_P8_27_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_pin: pinmux_P8_27_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_pu_pin: pinmux_P8_27_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_pd_pin: pinmux_P8_27_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_input_pin: pinmux_P8_27_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_pruout_pin: pinmux_P8_27_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_vsync.pru1_out8 */ + P8_27_pruin_pin: pinmux_P8_27_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_vsync.pru1_in8 */ + + /* P8_28 (ZCZ ball V5) hdmi */ + P8_28_default_pin: pinmux_P8_28_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_pin: pinmux_P8_28_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_pu_pin: pinmux_P8_28_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_pd_pin: pinmux_P8_28_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_input_pin: pinmux_P8_28_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_pruout_pin: pinmux_P8_28_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_pclk.pru1_out10 */ + P8_28_pruin_pin: pinmux_P8_28_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_pclk.pru1_in10 */ + + /* P8_29 (ZCZ ball R5) hdmi */ + P8_29_default_pin: pinmux_P8_29_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_pin: pinmux_P8_29_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_pu_pin: pinmux_P8_29_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_pd_pin: pinmux_P8_29_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_input_pin: pinmux_P8_29_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_pruout_pin: pinmux_P8_29_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_hsync.pru1_out9 */ + P8_29_pruin_pin: pinmux_P8_29_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_hsync.pru1_in9 */ + + /* P8_30 (ZCZ ball R6) hdmi */ + P8_30_default_pin: pinmux_P8_30_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_pin: pinmux_P8_30_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_pu_pin: pinmux_P8_30_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_pd_pin: pinmux_P8_30_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_input_pin: pinmux_P8_30_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_pruout_pin: pinmux_P8_30_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_ac_bias_en.pru1_out11 */ + P8_30_pruin_pin: pinmux_P8_30_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE6) >; }; /* lcd_ac_bias_en.pru1_in11 */ + + /* P8_31 (ZCZ ball V4) hdmi */ + P8_31_default_pin: pinmux_P8_31_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_pin: pinmux_P8_31_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_pu_pin: pinmux_P8_31_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_pd_pin: pinmux_P8_31_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_input_pin: pinmux_P8_31_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_qep_pin: pinmux_P8_31_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data14.eqep1_index */ + P8_31_uart_pin: pinmux_P8_31_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* lcd_data14.uart5_rxd */ + + /* P8_32 (ZCZ ball T5) hdmi */ + P8_32_default_pin: pinmux_P8_32_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_pin: pinmux_P8_32_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_pu_pin: pinmux_P8_32_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_pd_pin: pinmux_P8_32_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_input_pin: pinmux_P8_32_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_qep_pin: pinmux_P8_32_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data15.eqep1_strobe */ + + /* P8_33 (ZCZ ball V3) hdmi */ + P8_33_default_pin: pinmux_P8_33_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_pin: pinmux_P8_33_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_pu_pin: pinmux_P8_33_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_pd_pin: pinmux_P8_33_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_input_pin: pinmux_P8_33_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_qep_pin: pinmux_P8_33_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data13.eqep1b_in */ + + /* P8_34 (ZCZ ball U4) hdmi */ + P8_34_default_pin: pinmux_P8_34_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_pin: pinmux_P8_34_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_pu_pin: pinmux_P8_34_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_pd_pin: pinmux_P8_34_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_input_pin: pinmux_P8_34_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_pwm_pin: pinmux_P8_34_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data11.ehrpwm1b */ + + /* P8_35 (ZCZ ball V2) hdmi */ + P8_35_default_pin: pinmux_P8_35_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_pin: pinmux_P8_35_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_pu_pin: pinmux_P8_35_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_pd_pin: pinmux_P8_35_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_input_pin: pinmux_P8_35_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_qep_pin: pinmux_P8_35_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data12.eqep1a_in */ + + /* P8_36 (ZCZ ball U3) hdmi */ + P8_36_default_pin: pinmux_P8_36_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_pin: pinmux_P8_36_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_pu_pin: pinmux_P8_36_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_pd_pin: pinmux_P8_36_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_input_pin: pinmux_P8_36_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_pwm_pin: pinmux_P8_36_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data10.ehrpwm1a */ + + /* P8_37 (ZCZ ball U1) hdmi */ + P8_37_default_pin: pinmux_P8_37_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_pin: pinmux_P8_37_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_pu_pin: pinmux_P8_37_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_pd_pin: pinmux_P8_37_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_input_pin: pinmux_P8_37_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_pwm_pin: pinmux_P8_37_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data8.ehrpwm1_tripzone_input */ + P8_37_uart_pin: pinmux_P8_37_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* lcd_data8.uart5_txd */ + + /* P8_38 (ZCZ ball U2) hdmi */ + P8_38_default_pin: pinmux_P8_38_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_pin: pinmux_P8_38_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_pu_pin: pinmux_P8_38_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_pd_pin: pinmux_P8_38_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_input_pin: pinmux_P8_38_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_pwm_pin: pinmux_P8_38_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data9.ehrpwm0_synco */ + P8_38_uart_pin: pinmux_P8_38_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* lcd_data9.uart5_rxd */ + + /* P8_39 (ZCZ ball T3) hdmi */ + P8_39_default_pin: pinmux_P8_39_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_pin: pinmux_P8_39_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_pu_pin: pinmux_P8_39_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_pd_pin: pinmux_P8_39_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_input_pin: pinmux_P8_39_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_qep_pin: pinmux_P8_39_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data6.eqep2_index */ + P8_39_pruout_pin: pinmux_P8_39_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data6.pru1_out6 */ + P8_39_pruin_pin: pinmux_P8_39_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data6.pru1_in6 */ + + /* P8_40 (ZCZ ball T4) hdmi */ + P8_40_default_pin: pinmux_P8_40_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_pin: pinmux_P8_40_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_pu_pin: pinmux_P8_40_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_pd_pin: pinmux_P8_40_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_input_pin: pinmux_P8_40_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_qep_pin: pinmux_P8_40_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data7.eqep2_strobe */ + P8_40_pruout_pin: pinmux_P8_40_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data7.pru1_out7 */ + P8_40_pruin_pin: pinmux_P8_40_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data7.pru1_in7 */ + + /* P8_41 (ZCZ ball T1) hdmi */ + P8_41_default_pin: pinmux_P8_41_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_pin: pinmux_P8_41_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_pu_pin: pinmux_P8_41_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_pd_pin: pinmux_P8_41_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_input_pin: pinmux_P8_41_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_qep_pin: pinmux_P8_41_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data4.eqep2a_in */ + P8_41_pruout_pin: pinmux_P8_41_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data4.pru1_out4 */ + P8_41_pruin_pin: pinmux_P8_41_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data4.pru1_in4 */ + + /* P8_42 (ZCZ ball T2) hdmi */ + P8_42_default_pin: pinmux_P8_42_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_pin: pinmux_P8_42_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_pu_pin: pinmux_P8_42_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_pd_pin: pinmux_P8_42_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_input_pin: pinmux_P8_42_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_qep_pin: pinmux_P8_42_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data5.eqep2b_in */ + P8_42_pruout_pin: pinmux_P8_42_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data5.pru1_out5 */ + P8_42_pruin_pin: pinmux_P8_42_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data5.pru1_in5 */ + + /* P8_43 (ZCZ ball R3) hdmi */ + P8_43_default_pin: pinmux_P8_43_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_pin: pinmux_P8_43_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_pu_pin: pinmux_P8_43_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_pd_pin: pinmux_P8_43_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_input_pin: pinmux_P8_43_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_pwm_pin: pinmux_P8_43_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data2.ehrpwm2_tripzone_input */ + P8_43_pruout_pin: pinmux_P8_43_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data2.pru1_out2 */ + P8_43_pruin_pin: pinmux_P8_43_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data2.pru1_in2 */ + + /* P8_44 (ZCZ ball R4) hdmi */ + P8_44_default_pin: pinmux_P8_44_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_pin: pinmux_P8_44_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_pu_pin: pinmux_P8_44_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_pd_pin: pinmux_P8_44_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_input_pin: pinmux_P8_44_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_pwm_pin: pinmux_P8_44_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data3.ehrpwm0_synco */ + P8_44_pruout_pin: pinmux_P8_44_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data3.pru1_out3 */ + P8_44_pruin_pin: pinmux_P8_44_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data3.pru1_in3 */ + + /* P8_45 (ZCZ ball R1) hdmi */ + P8_45_default_pin: pinmux_P8_45_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_pin: pinmux_P8_45_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_pu_pin: pinmux_P8_45_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_pd_pin: pinmux_P8_45_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_input_pin: pinmux_P8_45_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_pwm_pin: pinmux_P8_45_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data0.ehrpwm2a */ + P8_45_pruout_pin: pinmux_P8_45_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data0.pru1_out0 */ + P8_45_pruin_pin: pinmux_P8_45_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data0.pru1_in0 */ + + /* P8_46 (ZCZ ball R2) hdmi */ + P8_46_default_pin: pinmux_P8_46_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_pin: pinmux_P8_46_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_pu_pin: pinmux_P8_46_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_pd_pin: pinmux_P8_46_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_input_pin: pinmux_P8_46_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_pwm_pin: pinmux_P8_46_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data1.ehrpwm2b */ + P8_46_pruout_pin: pinmux_P8_46_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data1.pru1_out1 */ + P8_46_pruin_pin: pinmux_P8_46_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data1.pru1_in1 */ + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + + /* P9_02 GND */ + + /* P9_03 3V3 */ + + /* P9_04 3V3 */ + + /* P9_05 VDD_5V */ + + /* P9_06 VDD_5V */ + + /* P9_07 SYS_5V */ + + /* P9_08 SYS_5V */ + + /* P9_09 PWR_BUT */ + + /* P9_10 RSTn */ + + /* P9_11 (ZCZ ball T17) gpio0_30 */ + P9_11_default_pin: pinmux_P9_11_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_pin: pinmux_P9_11_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_input_pin: pinmux_P9_11_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_uart_pin: pinmux_P9_11_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wait0.uart4_rxd */ + + /* P9_12 (ZCZ ball U18) gpio1_28 */ + P9_12_default_pin: pinmux_P9_12_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_pin: pinmux_P9_12_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_pu_pin: pinmux_P9_12_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_pd_pin: pinmux_P9_12_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_input_pin: pinmux_P9_12_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + + /* P9_13 (ZCZ ball U17) gpio0_31 */ + P9_13_default_pin: pinmux_P9_13_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_pin: pinmux_P9_13_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_pu_pin: pinmux_P9_13_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_pd_pin: pinmux_P9_13_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_input_pin: pinmux_P9_13_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_uart_pin: pinmux_P9_13_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wpn.uart4_txd */ + + /* P9_14 (ZCZ ball U14) gpio1_18 */ + P9_14_default_pin: pinmux_P9_14_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_pin: pinmux_P9_14_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_pu_pin: pinmux_P9_14_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_pd_pin: pinmux_P9_14_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_input_pin: pinmux_P9_14_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_pwm_pin: pinmux_P9_14_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a2.ehrpwm1a */ + + /* P9_15 (ZCZ ball R13) gpio1_16 */ + P9_15_default_pin: pinmux_P9_15_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_pin: pinmux_P9_15_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_pu_pin: pinmux_P9_15_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_pd_pin: pinmux_P9_15_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_input_pin: pinmux_P9_15_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_pwm_pin: pinmux_P9_15_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a0.ehrpwm1_tripzone_input */ + + /* P9_16 (ZCZ ball T14) gpio1_19 */ + P9_16_default_pin: pinmux_P9_16_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_pin: pinmux_P9_16_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_pu_pin: pinmux_P9_16_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_pd_pin: pinmux_P9_16_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_input_pin: pinmux_P9_16_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_pwm_pin: pinmux_P9_16_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a3.ehrpwm1b */ + + /* P9_17 (ZCZ ball A16) gpio0_5 */ + P9_17_default_pin: pinmux_P9_17_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_pin: pinmux_P9_17_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_pu_pin: pinmux_P9_17_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_pd_pin: pinmux_P9_17_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_input_pin: pinmux_P9_17_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_INPUT | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_spi_cs_pin: pinmux_P9_17_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_cs0.spi0_cs0 */ + P9_17_i2c_pin: pinmux_P9_17_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_cs0.i2c1_scl */ + P9_17_pwm_pin: pinmux_P9_17_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_cs0.ehrpwm0_synci */ + P9_17_pru_uart_pin: pinmux_P9_17_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_cs0.pr1_uart0_txd */ + + /* P9_18 (ZCZ ball B16) gpio0_4 */ + P9_18_default_pin: pinmux_P9_18_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_pin: pinmux_P9_18_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_pu_pin: pinmux_P9_18_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_pd_pin: pinmux_P9_18_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_input_pin: pinmux_P9_18_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_INPUT | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_spi_pin: pinmux_P9_18_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d1.spi0_d1 */ + P9_18_i2c_pin: pinmux_P9_18_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_d1.i2c1_sda */ + P9_18_pwm_pin: pinmux_P9_18_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_d1.ehrpwm0_tripzone_input */ + P9_18_pru_uart_pin: pinmux_P9_18_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_d1.pr1_uart0_rxd */ + + /* P9_19 (ZCZ ball D17) i2c2_scl */ + P9_19_default_pin: pinmux_P9_19_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */ + P9_19_gpio_pin: pinmux_P9_19_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_gpio_pu_pin: pinmux_P9_19_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_gpio_pd_pin: pinmux_P9_19_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_gpio_input_pin: pinmux_P9_19_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_INPUT | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_timer_pin: pinmux_P9_19_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart1_rtsn.timer5 */ + P9_19_can_pin: pinmux_P9_19_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart1_rtsn.dcan0_rx */ + P9_19_i2c_pin: pinmux_P9_19_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */ + P9_19_spi_cs_pin: pinmux_P9_19_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_rtsn.spi1_cs1 */ + P9_19_pru_uart_pin: pinmux_P9_19_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_rtsn.pr1_uart0_rts_n */ + + /* P9_20 (ZCZ ball D18) i2c2_sda */ + P9_20_default_pin: pinmux_P9_20_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */ + P9_20_gpio_pin: pinmux_P9_20_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_gpio_pu_pin: pinmux_P9_20_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_gpio_pd_pin: pinmux_P9_20_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_gpio_input_pin: pinmux_P9_20_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_INPUT | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_timer_pin: pinmux_P9_20_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart1_ctsn.timer6 */ + P9_20_can_pin: pinmux_P9_20_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart1_ctsn.dcan0_tx */ + P9_20_i2c_pin: pinmux_P9_20_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */ + P9_20_spi_cs_pin: pinmux_P9_20_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_ctsn.spi1_cs0 */ + P9_20_pru_uart_pin: pinmux_P9_20_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_ctsn.pr1_uart0_cts_n */ + + /* P9_21 (ZCZ ball B17) gpio0_3 */ + P9_21_default_pin: pinmux_P9_21_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_pin: pinmux_P9_21_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_pu_pin: pinmux_P9_21_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_pd_pin: pinmux_P9_21_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_input_pin: pinmux_P9_21_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_INPUT | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_spi_pin: pinmux_P9_21_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d0.spi0_d0 */ + P9_21_uart_pin: pinmux_P9_21_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* spi0_d0.uart2_txd */ + P9_21_i2c_pin: pinmux_P9_21_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_d0.i2c2_scl */ + P9_21_pwm_pin: pinmux_P9_21_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_d0.ehrpwm0b */ + P9_21_pru_uart_pin: pinmux_P9_21_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_d0.pr1_uart0_rts_n */ + + /* P9_22 (ZCZ ball A17) gpio0_2 */ + P9_22_default_pin: pinmux_P9_22_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_pin: pinmux_P9_22_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_pu_pin: pinmux_P9_22_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_pd_pin: pinmux_P9_22_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_input_pin: pinmux_P9_22_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_INPUT | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_spi_sclk_pin: pinmux_P9_22_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_sclk.spi0_sclk */ + P9_22_uart_pin: pinmux_P9_22_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* spi0_sclk.uart2_rxd */ + P9_22_i2c_pin: pinmux_P9_22_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_sclk.i2c2_sda */ + P9_22_pwm_pin: pinmux_P9_22_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_sclk.ehrpwm0a */ + P9_22_pru_uart_pin: pinmux_P9_22_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_sclk.pr1_uart0_cts_n */ + + /* P9_23 (ZCZ ball V14) gpio1_17 */ + P9_23_default_pin: pinmux_P9_23_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_pin: pinmux_P9_23_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_input_pin: pinmux_P9_23_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_pwm_pin: pinmux_P9_23_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a1.ehrpwm0_synco */ + + /* P9_24 (ZCZ ball D15) gpio0_15 */ + P9_24_default_pin: pinmux_P9_24_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_pin: pinmux_P9_24_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_pu_pin: pinmux_P9_24_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_pd_pin: pinmux_P9_24_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_input_pin: pinmux_P9_24_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_uart_pin: pinmux_P9_24_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart1_txd.uart1_txd */ + P9_24_can_pin: pinmux_P9_24_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart1_txd.dcan1_rx */ + P9_24_i2c_pin: pinmux_P9_24_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_txd.i2c1_scl */ + P9_24_pru_uart_pin: pinmux_P9_24_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_txd.pr1_uart0_txd */ + P9_24_pruin_pin: pinmux_P9_24_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE6) >; }; /* uart1_txd.pru0_in16 */ + + /* P9_25 (ZCZ ball A14) audio */ + P9_25_default_pin: pinmux_P9_25_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_pin: pinmux_P9_25_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_pu_pin: pinmux_P9_25_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_pd_pin: pinmux_P9_25_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_input_pin: pinmux_P9_25_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_qep_pin: pinmux_P9_25_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_ahclkx.eqep0_strobe */ + P9_25_pruout_pin: pinmux_P9_25_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_ahclkx.pru0_out7 */ + P9_25_pruin_pin: pinmux_P9_25_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkx.pru0_in7 */ + + /* P9_26 (ZCZ ball D16) gpio0_14 */ + P9_26_default_pin: pinmux_P9_26_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_pin: pinmux_P9_26_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_pu_pin: pinmux_P9_26_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_pd_pin: pinmux_P9_26_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_input_pin: pinmux_P9_26_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_uart_pin: pinmux_P9_26_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart1_rxd.uart1_rxd */ + P9_26_can_pin: pinmux_P9_26_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart1_rxd.dcan1_tx */ + P9_26_i2c_pin: pinmux_P9_26_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rxd.i2c1_sda */ + P9_26_pru_uart_pin: pinmux_P9_26_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_rxd.pr1_uart0_rxd */ + P9_26_pruin_pin: pinmux_P9_26_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE6) >; }; /* uart1_rxd.pru1_in16 */ + + /* P9_27 (ZCZ ball C13) gpio3_19 */ + P9_27_default_pin: pinmux_P9_27_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_pin: pinmux_P9_27_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_pu_pin: pinmux_P9_27_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_pd_pin: pinmux_P9_27_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_input_pin: pinmux_P9_27_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_qep_pin: pinmux_P9_27_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_fsr.eqep0b_in */ + P9_27_pruout_pin: pinmux_P9_27_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_fsr.pru0_out5 */ + P9_27_pruin_pin: pinmux_P9_27_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsr.pru0_in5 */ + + /* P9_28 (ZCZ ball C12) audio */ + P9_28_default_pin: pinmux_P9_28_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_pin: pinmux_P9_28_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_input_pin: pinmux_P9_28_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_pwm_pin: pinmux_P9_28_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_ahclkr.ehrpwm0_synci */ + P9_28_spi_cs_pin: pinmux_P9_28_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_ahclkr.spi1_cs0 */ + P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* mcasp0_ahclkr.ecap2_in_pwm2_out */ + P9_28_pruout_pin: pinmux_P9_28_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_ahclkr.pru0_out3 */ + P9_28_pruin_pin: pinmux_P9_28_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkr.pru0_in3 */ + + /* P9_29 (ZCZ ball B13) audio */ + P9_29_default_pin: pinmux_P9_29_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_pin: pinmux_P9_29_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_pu_pin: pinmux_P9_29_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_pd_pin: pinmux_P9_29_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_input_pin: pinmux_P9_29_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_pwm_pin: pinmux_P9_29_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_fsx.ehrpwm0b */ + P9_29_spi_pin: pinmux_P9_29_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_fsx.spi1_d0 */ + P9_29_pruout_pin: pinmux_P9_29_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_fsx.pru0_out1 */ + P9_29_pruin_pin: pinmux_P9_29_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsx.pru0_in1 */ + + /* P9_30 (ZCZ ball D12) gpio3_16 */ + P9_30_default_pin: pinmux_P9_30_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P9_30_gpio_pin: pinmux_P9_30_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P9_30_gpio_pu_pin: pinmux_P9_30_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P9_30_gpio_pd_pin: pinmux_P9_30_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P9_30_gpio_input_pin: pinmux_P9_30_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P9_30_pwm_pin: pinmux_P9_30_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_axr0.ehrpwm0_tripzone_input */ + P9_30_spi_pin: pinmux_P9_30_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_axr0.spi1_d1 */ + P9_30_pruout_pin: pinmux_P9_30_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_axr0.pru0_out2 */ + P9_30_pruin_pin: pinmux_P9_30_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr0.pru0_in2 */ + + /* P9_31 (ZCZ ball A13) audio */ + P9_31_default_pin: pinmux_P9_31_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_pin: pinmux_P9_31_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_pu_pin: pinmux_P9_31_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_pd_pin: pinmux_P9_31_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_input_pin: pinmux_P9_31_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_pwm_pin: pinmux_P9_31_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkx.ehrpwm0a */ + P9_31_spi_sclk_pin: pinmux_P9_31_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_aclkx.spi1_sclk */ + P9_31_pruout_pin: pinmux_P9_31_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_aclkx.pru0_out0 */ + P9_31_pruin_pin: pinmux_P9_31_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkx.pru0_in0 */ + + /* P9_32 VADC */ + + /* P9_33 (ZCZ ball C8) AIN4 */ + + /* P9_34 AGND */ + + /* P9_35 (ZCZ ball A8) AIN6 */ + + /* P9_36 (ZCZ ball B8) AIN5 */ + + /* P9_37 (ZCZ ball B7) AIN2 */ + + /* P9_38 (ZCZ ball A7) AIN3 */ + + /* P9_39 (ZCZ ball B6) AIN0 */ + + /* P9_40 (ZCZ ball C7) AIN1 */ + + /* P9_41 (ZCZ ball D14) gpio0_20 */ + P9_41_default_pin: pinmux_P9_41_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_pin: pinmux_P9_41_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_pu_pin: pinmux_P9_41_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_pd_pin: pinmux_P9_41_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_input_pin: pinmux_P9_41_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_timer_pin: pinmux_P9_41_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* xdma_event_intr1.timer7 */ + P9_41_pruin_pin: pinmux_P9_41_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE5) >; }; /* xdma_event_intr1.pru0_in16 */ + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) gpio3_20 */ + P9_91_default_pin: pinmux_P9_91_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_pin: pinmux_P9_91_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_pu_pin: pinmux_P9_91_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_pd_pin: pinmux_P9_91_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_input_pin: pinmux_P9_91_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_qep_pin: pinmux_P9_91_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_axr1.eqep0_index */ + P9_91_pruout_pin: pinmux_P9_91_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_axr1.pru0_out6 */ + P9_91_pruin_pin: pinmux_P9_91_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr1.pru0_in6 */ + + /* P9_42 (ZCZ ball C18) gpio0_7 */ + P9_42_default_pin: pinmux_P9_42_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_pin: pinmux_P9_42_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_pu_pin: pinmux_P9_42_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_pd_pin: pinmux_P9_42_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_input_pin: pinmux_P9_42_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_INPUT | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_pwm_pin: pinmux_P9_42_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE0) >; }; /* eCAP0_in_PWM0_out.ecap0_in_pwm0_out */ + P9_42_uart_pin: pinmux_P9_42_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* eCAP0_in_PWM0_out.uart3_txd */ + P9_42_spi_cs_pin: pinmux_P9_42_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* eCAP0_in_PWM0_out.spi1_cs1 */ + P9_42_pru_ecap_pin: pinmux_P9_42_pru_ecap_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* eCAP0_in_PWM0_out.pr1_ecap0_ecap_capin_apwm_o */ + P9_42_spi_sclk_pin: pinmux_P9_42_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* eCAP0_in_PWM0_out.spi1_sclk */ + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) gpio3_18 */ + P9_92_default_pin: pinmux_P9_92_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_pin: pinmux_P9_92_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_pu_pin: pinmux_P9_92_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_pd_pin: pinmux_P9_92_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_input_pin: pinmux_P9_92_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_qep_pin: pinmux_P9_92_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkr.eqep0a_in */ + P9_92_pruout_pin: pinmux_P9_92_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_aclkr.pru0_out4 */ + P9_92_pruin_pin: pinmux_P9_92_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkr.pru0_in4 */ + + /* P9_43 GND */ + + /* P9_44 GND */ + + /* P9_45 GND */ + + /* P9_46 GND */ +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + clock-frequency = <100000>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + clock-frequency = <100000>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart5 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&dcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&eqep0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ +}; + +&eqep1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ +}; + +&eqep2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ +}; + +&epwmss0 { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ehrpwm1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ehrpwm2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ecap0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ecap1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ecap2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + symlink = "spi/0.0"; + + reg = <0>; + spi-max-frequency = <16000000>; + spi-cpha; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + symlink = "spi/0.1"; + + reg = <1>; + spi-max-frequency = <16000000>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + symlink = "spi/1.0"; + + reg = <0>; + spi-max-frequency = <16000000>; + spi-cpha; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + symlink = "spi/1.1"; + + reg = <1>; + spi-max-frequency = <16000000>; + }; +}; + +/**********************************************************************/ +/* Pin Multiplex Helpers */ +/* */ +/* These provide userspace runtime pin configuration for the */ +/* BeagleBone cape expansion headers */ +/**********************************************************************/ + +&ocp { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + + /* P8_02 GND */ + + + /* P8_03 (ZCZ ball R9) emmc */ + P8_03_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_03_default_pin>; + pinctrl-1 = <&P8_03_gpio_pin>; + pinctrl-2 = <&P8_03_gpio_pu_pin>; + pinctrl-3 = <&P8_03_gpio_pd_pin>; + pinctrl-4 = <&P8_03_gpio_input_pin>; + }; + + /* P8_04 (ZCZ ball T9) emmc */ + P8_04_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_04_default_pin>; + pinctrl-1 = <&P8_04_gpio_pin>; + pinctrl-2 = <&P8_04_gpio_pu_pin>; + pinctrl-3 = <&P8_04_gpio_pd_pin>; + pinctrl-4 = <&P8_04_gpio_input_pin>; + }; + + /* P8_05 (ZCZ ball R8) emmc */ + P8_05_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_05_default_pin>; + pinctrl-1 = <&P8_05_gpio_pin>; + pinctrl-2 = <&P8_05_gpio_pu_pin>; + pinctrl-3 = <&P8_05_gpio_pd_pin>; + pinctrl-4 = <&P8_05_gpio_input_pin>; + }; + + /* P8_06 (ZCZ ball T8) emmc */ + P8_06_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_06_default_pin>; + pinctrl-1 = <&P8_06_gpio_pin>; + pinctrl-2 = <&P8_06_gpio_pu_pin>; + pinctrl-3 = <&P8_06_gpio_pd_pin>; + pinctrl-4 = <&P8_06_gpio_input_pin>; + }; + + /* P8_07 (ZCZ ball R7) */ + P8_07_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_07_default_pin>; + pinctrl-1 = <&P8_07_gpio_pin>; + pinctrl-2 = <&P8_07_gpio_pu_pin>; + pinctrl-3 = <&P8_07_gpio_pd_pin>; + pinctrl-4 = <&P8_07_gpio_input_pin>; + pinctrl-5 = <&P8_07_timer_pin>; + }; + + /* P8_08 (ZCZ ball T7) */ + P8_08_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_08_default_pin>; + pinctrl-1 = <&P8_08_gpio_pin>; + pinctrl-2 = <&P8_08_gpio_pu_pin>; + pinctrl-3 = <&P8_08_gpio_pd_pin>; + pinctrl-4 = <&P8_08_gpio_input_pin>; + pinctrl-5 = <&P8_08_timer_pin>; + }; + + /* P8_09 (ZCZ ball T6) */ + P8_09_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_09_default_pin>; + pinctrl-1 = <&P8_09_gpio_pin>; + pinctrl-2 = <&P8_09_gpio_pu_pin>; + pinctrl-3 = <&P8_09_gpio_pd_pin>; + pinctrl-4 = <&P8_09_gpio_input_pin>; + pinctrl-5 = <&P8_09_timer_pin>; + }; + + /* P8_10 (ZCZ ball U6) */ + P8_10_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_10_default_pin>; + pinctrl-1 = <&P8_10_gpio_pin>; + pinctrl-2 = <&P8_10_gpio_pu_pin>; + pinctrl-3 = <&P8_10_gpio_pd_pin>; + pinctrl-4 = <&P8_10_gpio_input_pin>; + pinctrl-5 = <&P8_10_timer_pin>; + }; + + /* P8_11 (ZCZ ball R12) */ + P8_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout"; + pinctrl-0 = <&P8_11_default_pin>; + pinctrl-1 = <&P8_11_gpio_pin>; + pinctrl-2 = <&P8_11_gpio_pu_pin>; + pinctrl-3 = <&P8_11_gpio_pd_pin>; + pinctrl-4 = <&P8_11_gpio_input_pin>; + pinctrl-5 = <&P8_11_qep_pin>; + pinctrl-6 = <&P8_11_pruout_pin>; + }; + + /* P8_12 (ZCZ ball T12) */ + P8_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout"; + pinctrl-0 = <&P8_12_default_pin>; + pinctrl-1 = <&P8_12_gpio_pin>; + pinctrl-2 = <&P8_12_gpio_pu_pin>; + pinctrl-3 = <&P8_12_gpio_pd_pin>; + pinctrl-4 = <&P8_12_gpio_input_pin>; + pinctrl-5 = <&P8_12_qep_pin>; + pinctrl-6 = <&P8_12_pruout_pin>; + }; + + /* P8_13 (ZCZ ball T10) */ + P8_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_13_default_pin>; + pinctrl-1 = <&P8_13_gpio_pin>; + pinctrl-2 = <&P8_13_gpio_pu_pin>; + pinctrl-3 = <&P8_13_gpio_pd_pin>; + pinctrl-4 = <&P8_13_gpio_input_pin>; + pinctrl-5 = <&P8_13_pwm_pin>; + }; + + /* P8_14 (ZCZ ball T11) */ + P8_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_14_default_pin>; + pinctrl-1 = <&P8_14_gpio_pin>; + pinctrl-2 = <&P8_14_gpio_pu_pin>; + pinctrl-3 = <&P8_14_gpio_pd_pin>; + pinctrl-4 = <&P8_14_gpio_input_pin>; + pinctrl-5 = <&P8_14_pwm_pin>; + }; + + /* P8_15 (ZCZ ball U13) */ + P8_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pru_ecap", "pruin"; + pinctrl-0 = <&P8_15_default_pin>; + pinctrl-1 = <&P8_15_gpio_pin>; + pinctrl-2 = <&P8_15_gpio_pu_pin>; + pinctrl-3 = <&P8_15_gpio_pd_pin>; + pinctrl-4 = <&P8_15_gpio_input_pin>; + pinctrl-5 = <&P8_15_qep_pin>; + pinctrl-6 = <&P8_15_pru_ecap_pin>; + pinctrl-7 = <&P8_15_pruin_pin>; + }; + + /* P8_16 (ZCZ ball V13) */ + P8_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruin"; + pinctrl-0 = <&P8_16_default_pin>; + pinctrl-1 = <&P8_16_gpio_pin>; + pinctrl-2 = <&P8_16_gpio_pu_pin>; + pinctrl-3 = <&P8_16_gpio_pd_pin>; + pinctrl-4 = <&P8_16_gpio_input_pin>; + pinctrl-5 = <&P8_16_qep_pin>; + pinctrl-6 = <&P8_16_pruin_pin>; + }; + + /* P8_17 (ZCZ ball U12) */ + P8_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_17_default_pin>; + pinctrl-1 = <&P8_17_gpio_pin>; + pinctrl-2 = <&P8_17_gpio_pu_pin>; + pinctrl-3 = <&P8_17_gpio_pd_pin>; + pinctrl-4 = <&P8_17_gpio_input_pin>; + pinctrl-5 = <&P8_17_pwm_pin>; + }; + + /* P8_18 (ZCZ ball V12) */ + P8_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_18_default_pin>; + pinctrl-1 = <&P8_18_gpio_pin>; + pinctrl-2 = <&P8_18_gpio_pu_pin>; + pinctrl-3 = <&P8_18_gpio_pd_pin>; + pinctrl-4 = <&P8_18_gpio_input_pin>; + }; + + /* P8_19 (ZCZ ball U10) */ + P8_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_19_default_pin>; + pinctrl-1 = <&P8_19_gpio_pin>; + pinctrl-2 = <&P8_19_gpio_pu_pin>; + pinctrl-3 = <&P8_19_gpio_pd_pin>; + pinctrl-4 = <&P8_19_gpio_input_pin>; + pinctrl-5 = <&P8_19_pwm_pin>; + }; + + /* P8_20 (ZCZ ball V9) emmc */ + P8_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_20_default_pin>; + pinctrl-1 = <&P8_20_gpio_pin>; + pinctrl-2 = <&P8_20_gpio_pu_pin>; + pinctrl-3 = <&P8_20_gpio_pd_pin>; + pinctrl-4 = <&P8_20_gpio_input_pin>; + pinctrl-5 = <&P8_20_pruout_pin>; + pinctrl-6 = <&P8_20_pruin_pin>; + }; + + /* P8_21 (ZCZ ball U9) emmc */ + P8_21_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_21_default_pin>; + pinctrl-1 = <&P8_21_gpio_pin>; + pinctrl-2 = <&P8_21_gpio_pu_pin>; + pinctrl-3 = <&P8_21_gpio_pd_pin>; + pinctrl-4 = <&P8_21_gpio_input_pin>; + pinctrl-5 = <&P8_21_pruout_pin>; + pinctrl-6 = <&P8_21_pruin_pin>; + }; + + /* P8_22 (ZCZ ball V8) emmc */ + P8_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_22_default_pin>; + pinctrl-1 = <&P8_22_gpio_pin>; + pinctrl-2 = <&P8_22_gpio_pu_pin>; + pinctrl-3 = <&P8_22_gpio_pd_pin>; + pinctrl-4 = <&P8_22_gpio_input_pin>; + }; + + /* P8_23 (ZCZ ball U8) emmc */ + P8_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_23_default_pin>; + pinctrl-1 = <&P8_23_gpio_pin>; + pinctrl-2 = <&P8_23_gpio_pu_pin>; + pinctrl-3 = <&P8_23_gpio_pd_pin>; + pinctrl-4 = <&P8_23_gpio_input_pin>; + }; + + /* P8_24 (ZCZ ball V7) emmc */ + P8_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_24_default_pin>; + pinctrl-1 = <&P8_24_gpio_pin>; + pinctrl-2 = <&P8_24_gpio_pu_pin>; + pinctrl-3 = <&P8_24_gpio_pd_pin>; + pinctrl-4 = <&P8_24_gpio_input_pin>; + }; + + /* P8_25 (ZCZ ball U7) emmc */ + P8_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_25_default_pin>; + pinctrl-1 = <&P8_25_gpio_pin>; + pinctrl-2 = <&P8_25_gpio_pu_pin>; + pinctrl-3 = <&P8_25_gpio_pd_pin>; + pinctrl-4 = <&P8_25_gpio_input_pin>; + }; + + /* P8_26 (ZCZ ball V6) */ + P8_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_26_default_pin>; + pinctrl-1 = <&P8_26_gpio_pin>; + pinctrl-2 = <&P8_26_gpio_pu_pin>; + pinctrl-3 = <&P8_26_gpio_pd_pin>; + pinctrl-4 = <&P8_26_gpio_input_pin>; + }; + + /* P8_27 (ZCZ ball U5) hdmi */ + P8_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_27_default_pin>; + pinctrl-1 = <&P8_27_gpio_pin>; + pinctrl-2 = <&P8_27_gpio_pu_pin>; + pinctrl-3 = <&P8_27_gpio_pd_pin>; + pinctrl-4 = <&P8_27_gpio_input_pin>; + pinctrl-5 = <&P8_27_pruout_pin>; + pinctrl-6 = <&P8_27_pruin_pin>; + }; + + /* P8_28 (ZCZ ball V5) hdmi */ + P8_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_28_default_pin>; + pinctrl-1 = <&P8_28_gpio_pin>; + pinctrl-2 = <&P8_28_gpio_pu_pin>; + pinctrl-3 = <&P8_28_gpio_pd_pin>; + pinctrl-4 = <&P8_28_gpio_input_pin>; + pinctrl-5 = <&P8_28_pruout_pin>; + pinctrl-6 = <&P8_28_pruin_pin>; + }; + + /* P8_29 (ZCZ ball R5) hdmi */ + P8_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_29_default_pin>; + pinctrl-1 = <&P8_29_gpio_pin>; + pinctrl-2 = <&P8_29_gpio_pu_pin>; + pinctrl-3 = <&P8_29_gpio_pd_pin>; + pinctrl-4 = <&P8_29_gpio_input_pin>; + pinctrl-5 = <&P8_29_pruout_pin>; + pinctrl-6 = <&P8_29_pruin_pin>; + }; + + /* P8_30 (ZCZ ball R6) hdmi */ + P8_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_30_default_pin>; + pinctrl-1 = <&P8_30_gpio_pin>; + pinctrl-2 = <&P8_30_gpio_pu_pin>; + pinctrl-3 = <&P8_30_gpio_pd_pin>; + pinctrl-4 = <&P8_30_gpio_input_pin>; + pinctrl-5 = <&P8_30_pruout_pin>; + pinctrl-6 = <&P8_30_pruin_pin>; + }; + + /* P8_31 (ZCZ ball V4) hdmi */ + P8_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "qep"; + pinctrl-0 = <&P8_31_default_pin>; + pinctrl-1 = <&P8_31_gpio_pin>; + pinctrl-2 = <&P8_31_gpio_pu_pin>; + pinctrl-3 = <&P8_31_gpio_pd_pin>; + pinctrl-4 = <&P8_31_gpio_input_pin>; + pinctrl-5 = <&P8_31_uart_pin>; + pinctrl-6 = <&P8_31_qep_pin>; + }; + + /* P8_32 (ZCZ ball T5) hdmi */ + P8_32_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P8_32_default_pin>; + pinctrl-1 = <&P8_32_gpio_pin>; + pinctrl-2 = <&P8_32_gpio_pu_pin>; + pinctrl-3 = <&P8_32_gpio_pd_pin>; + pinctrl-4 = <&P8_32_gpio_input_pin>; + pinctrl-5 = <&P8_32_qep_pin>; + }; + + /* P8_33 (ZCZ ball V3) hdmi */ + P8_33_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P8_33_default_pin>; + pinctrl-1 = <&P8_33_gpio_pin>; + pinctrl-2 = <&P8_33_gpio_pu_pin>; + pinctrl-3 = <&P8_33_gpio_pd_pin>; + pinctrl-4 = <&P8_33_gpio_input_pin>; + pinctrl-5 = <&P8_33_qep_pin>; + }; + + /* P8_34 (ZCZ ball U4) hdmi */ + P8_34_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_34_default_pin>; + pinctrl-1 = <&P8_34_gpio_pin>; + pinctrl-2 = <&P8_34_gpio_pu_pin>; + pinctrl-3 = <&P8_34_gpio_pd_pin>; + pinctrl-4 = <&P8_34_gpio_input_pin>; + pinctrl-5 = <&P8_34_pwm_pin>; + }; + + /* P8_35 (ZCZ ball V2) hdmi */ + P8_35_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P8_35_default_pin>; + pinctrl-1 = <&P8_35_gpio_pin>; + pinctrl-2 = <&P8_35_gpio_pu_pin>; + pinctrl-3 = <&P8_35_gpio_pd_pin>; + pinctrl-4 = <&P8_35_gpio_input_pin>; + pinctrl-5 = <&P8_35_qep_pin>; + }; + + /* P8_36 (ZCZ ball U3) hdmi */ + P8_36_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_36_default_pin>; + pinctrl-1 = <&P8_36_gpio_pin>; + pinctrl-2 = <&P8_36_gpio_pu_pin>; + pinctrl-3 = <&P8_36_gpio_pd_pin>; + pinctrl-4 = <&P8_36_gpio_input_pin>; + pinctrl-5 = <&P8_36_pwm_pin>; + }; + + /* P8_37 (ZCZ ball U1) hdmi */ + P8_37_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "pwm"; + pinctrl-0 = <&P8_37_default_pin>; + pinctrl-1 = <&P8_37_gpio_pin>; + pinctrl-2 = <&P8_37_gpio_pu_pin>; + pinctrl-3 = <&P8_37_gpio_pd_pin>; + pinctrl-4 = <&P8_37_gpio_input_pin>; + pinctrl-5 = <&P8_37_uart_pin>; + pinctrl-6 = <&P8_37_pwm_pin>; + }; + + /* P8_38 (ZCZ ball U2) hdmi */ + P8_38_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "pwm"; + pinctrl-0 = <&P8_38_default_pin>; + pinctrl-1 = <&P8_38_gpio_pin>; + pinctrl-2 = <&P8_38_gpio_pu_pin>; + pinctrl-3 = <&P8_38_gpio_pd_pin>; + pinctrl-4 = <&P8_38_gpio_input_pin>; + pinctrl-5 = <&P8_38_uart_pin>; + pinctrl-6 = <&P8_38_pwm_pin>; + }; + + /* P8_39 (ZCZ ball T3) hdmi */ + P8_39_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_39_default_pin>; + pinctrl-1 = <&P8_39_gpio_pin>; + pinctrl-2 = <&P8_39_gpio_pu_pin>; + pinctrl-3 = <&P8_39_gpio_pd_pin>; + pinctrl-4 = <&P8_39_gpio_input_pin>; + pinctrl-5 = <&P8_39_qep_pin>; + pinctrl-6 = <&P8_39_pruout_pin>; + pinctrl-7 = <&P8_39_pruin_pin>; + }; + + /* P8_40 (ZCZ ball T4) hdmi */ + P8_40_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_40_default_pin>; + pinctrl-1 = <&P8_40_gpio_pin>; + pinctrl-2 = <&P8_40_gpio_pu_pin>; + pinctrl-3 = <&P8_40_gpio_pd_pin>; + pinctrl-4 = <&P8_40_gpio_input_pin>; + pinctrl-5 = <&P8_40_qep_pin>; + pinctrl-6 = <&P8_40_pruout_pin>; + pinctrl-7 = <&P8_40_pruin_pin>; + }; + + /* P8_41 (ZCZ ball T1) hdmi */ + P8_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_41_default_pin>; + pinctrl-1 = <&P8_41_gpio_pin>; + pinctrl-2 = <&P8_41_gpio_pu_pin>; + pinctrl-3 = <&P8_41_gpio_pd_pin>; + pinctrl-4 = <&P8_41_gpio_input_pin>; + pinctrl-5 = <&P8_41_qep_pin>; + pinctrl-6 = <&P8_41_pruout_pin>; + pinctrl-7 = <&P8_41_pruin_pin>; + }; + + /* P8_42 (ZCZ ball T2) hdmi */ + P8_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_42_default_pin>; + pinctrl-1 = <&P8_42_gpio_pin>; + pinctrl-2 = <&P8_42_gpio_pu_pin>; + pinctrl-3 = <&P8_42_gpio_pd_pin>; + pinctrl-4 = <&P8_42_gpio_input_pin>; + pinctrl-5 = <&P8_42_qep_pin>; + pinctrl-6 = <&P8_42_pruout_pin>; + pinctrl-7 = <&P8_42_pruin_pin>; + }; + + /* P8_43 (ZCZ ball R3) hdmi */ + P8_43_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_43_default_pin>; + pinctrl-1 = <&P8_43_gpio_pin>; + pinctrl-2 = <&P8_43_gpio_pu_pin>; + pinctrl-3 = <&P8_43_gpio_pd_pin>; + pinctrl-4 = <&P8_43_gpio_input_pin>; + pinctrl-5 = <&P8_43_pwm_pin>; + pinctrl-6 = <&P8_43_pruout_pin>; + pinctrl-7 = <&P8_43_pruin_pin>; + }; + + /* P8_44 (ZCZ ball R4) hdmi */ + P8_44_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_44_default_pin>; + pinctrl-1 = <&P8_44_gpio_pin>; + pinctrl-2 = <&P8_44_gpio_pu_pin>; + pinctrl-3 = <&P8_44_gpio_pd_pin>; + pinctrl-4 = <&P8_44_gpio_input_pin>; + pinctrl-5 = <&P8_44_pwm_pin>; + pinctrl-6 = <&P8_44_pruout_pin>; + pinctrl-7 = <&P8_44_pruin_pin>; + }; + + /* P8_45 (ZCZ ball R1) hdmi */ + P8_45_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_45_default_pin>; + pinctrl-1 = <&P8_45_gpio_pin>; + pinctrl-2 = <&P8_45_gpio_pu_pin>; + pinctrl-3 = <&P8_45_gpio_pd_pin>; + pinctrl-4 = <&P8_45_gpio_input_pin>; + pinctrl-5 = <&P8_45_pwm_pin>; + pinctrl-6 = <&P8_45_pruout_pin>; + pinctrl-7 = <&P8_45_pruin_pin>; + }; + + /* P8_46 (ZCZ ball R2) hdmi */ + P8_46_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_46_default_pin>; + pinctrl-1 = <&P8_46_gpio_pin>; + pinctrl-2 = <&P8_46_gpio_pu_pin>; + pinctrl-3 = <&P8_46_gpio_pd_pin>; + pinctrl-4 = <&P8_46_gpio_input_pin>; + pinctrl-5 = <&P8_46_pwm_pin>; + pinctrl-6 = <&P8_46_pruout_pin>; + pinctrl-7 = <&P8_46_pruin_pin>; + }; + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + + /* P9_02 GND */ + + /* P9_03 3V3 */ + + /* P9_04 3V3 */ + + /* P9_05 VDD_5V */ + + /* P9_06 VDD_5V */ + + /* P9_07 SYS_5V */ + + /* P9_08 SYS_5V */ + + /* P9_09 PWR_BUT */ + + /* P9_10 RSTn */ + + /* P9_11 (ZCZ ball T17) */ + P9_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart"; + pinctrl-0 = <&P9_11_default_pin>; + pinctrl-1 = <&P9_11_gpio_pin>; + pinctrl-2 = <&P9_11_gpio_pu_pin>; + pinctrl-3 = <&P9_11_gpio_pd_pin>; + pinctrl-4 = <&P9_11_gpio_input_pin>; + pinctrl-5 = <&P9_11_uart_pin>; + }; + + /* P9_12 (ZCZ ball U18) */ + P9_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P9_12_default_pin>; + pinctrl-1 = <&P9_12_gpio_pin>; + pinctrl-2 = <&P9_12_gpio_pu_pin>; + pinctrl-3 = <&P9_12_gpio_pd_pin>; + pinctrl-4 = <&P9_12_gpio_input_pin>; + }; + + /* P9_13 (ZCZ ball U17) */ + P9_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart"; + pinctrl-0 = <&P9_13_default_pin>; + pinctrl-1 = <&P9_13_gpio_pin>; + pinctrl-2 = <&P9_13_gpio_pu_pin>; + pinctrl-3 = <&P9_13_gpio_pd_pin>; + pinctrl-4 = <&P9_13_gpio_input_pin>; + pinctrl-5 = <&P9_13_uart_pin>; + }; + + /* P9_14 (ZCZ ball U14) */ + P9_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_14_default_pin>; + pinctrl-1 = <&P9_14_gpio_pin>; + pinctrl-2 = <&P9_14_gpio_pu_pin>; + pinctrl-3 = <&P9_14_gpio_pd_pin>; + pinctrl-4 = <&P9_14_gpio_input_pin>; + pinctrl-5 = <&P9_14_pwm_pin>; + }; + + /* P9_15 (ZCZ ball R13) */ + P9_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_15_default_pin>; + pinctrl-1 = <&P9_15_gpio_pin>; + pinctrl-2 = <&P9_15_gpio_pu_pin>; + pinctrl-3 = <&P9_15_gpio_pd_pin>; + pinctrl-4 = <&P9_15_gpio_input_pin>; + pinctrl-5 = <&P9_15_pwm_pin>; + }; + + /* P9_16 (ZCZ ball T14) */ + P9_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_16_default_pin>; + pinctrl-1 = <&P9_16_gpio_pin>; + pinctrl-2 = <&P9_16_gpio_pu_pin>; + pinctrl-3 = <&P9_16_gpio_pd_pin>; + pinctrl-4 = <&P9_16_gpio_input_pin>; + pinctrl-5 = <&P9_16_pwm_pin>; + }; + + /* P9_17 (ZCZ ball A16) */ + P9_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_17_default_pin>; + pinctrl-1 = <&P9_17_gpio_pin>; + pinctrl-2 = <&P9_17_gpio_pu_pin>; + pinctrl-3 = <&P9_17_gpio_pd_pin>; + pinctrl-4 = <&P9_17_gpio_input_pin>; + pinctrl-5 = <&P9_17_spi_cs_pin>; + pinctrl-6 = <&P9_17_i2c_pin>; + pinctrl-7 = <&P9_17_pwm_pin>; + pinctrl-8 = <&P9_17_pru_uart_pin>; + }; + + /* P9_18 (ZCZ ball B16) */ + P9_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_18_default_pin>; + pinctrl-1 = <&P9_18_gpio_pin>; + pinctrl-2 = <&P9_18_gpio_pu_pin>; + pinctrl-3 = <&P9_18_gpio_pd_pin>; + pinctrl-4 = <&P9_18_gpio_input_pin>; + pinctrl-5 = <&P9_18_spi_pin>; + pinctrl-6 = <&P9_18_i2c_pin>; + pinctrl-7 = <&P9_18_pwm_pin>; + pinctrl-8 = <&P9_18_pru_uart_pin>; + }; + + /* P9_19 (ZCZ ball D17) i2c */ + P9_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer"; + pinctrl-0 = <&P9_19_default_pin>; + pinctrl-1 = <&P9_19_gpio_pin>; + pinctrl-2 = <&P9_19_gpio_pu_pin>; + pinctrl-3 = <&P9_19_gpio_pd_pin>; + pinctrl-4 = <&P9_19_gpio_input_pin>; + pinctrl-5 = <&P9_19_spi_cs_pin>; + pinctrl-6 = <&P9_19_can_pin>; + pinctrl-7 = <&P9_19_i2c_pin>; + pinctrl-8 = <&P9_19_pru_uart_pin>; + pinctrl-9 = <&P9_19_timer_pin>; + }; + + /* P9_20 (ZCZ ball D18) i2c */ + P9_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer"; + pinctrl-0 = <&P9_20_default_pin>; + pinctrl-1 = <&P9_20_gpio_pin>; + pinctrl-2 = <&P9_20_gpio_pu_pin>; + pinctrl-3 = <&P9_20_gpio_pd_pin>; + pinctrl-4 = <&P9_20_gpio_input_pin>; + pinctrl-5 = <&P9_20_spi_cs_pin>; + pinctrl-6 = <&P9_20_can_pin>; + pinctrl-7 = <&P9_20_i2c_pin>; + pinctrl-8 = <&P9_20_pru_uart_pin>; + pinctrl-9 = <&P9_20_timer_pin>; + }; + + /* P9_21 (ZCZ ball B17) */ + P9_21_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "uart", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_21_default_pin>; + pinctrl-1 = <&P9_21_gpio_pin>; + pinctrl-2 = <&P9_21_gpio_pu_pin>; + pinctrl-3 = <&P9_21_gpio_pd_pin>; + pinctrl-4 = <&P9_21_gpio_input_pin>; + pinctrl-5 = <&P9_21_spi_pin>; + pinctrl-6 = <&P9_21_uart_pin>; + pinctrl-7 = <&P9_21_i2c_pin>; + pinctrl-8 = <&P9_21_pwm_pin>; + pinctrl-9 = <&P9_21_pru_uart_pin>; + }; + + /* P9_22 (ZCZ ball A17) */ + P9_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "uart", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_22_default_pin>; + pinctrl-1 = <&P9_22_gpio_pin>; + pinctrl-2 = <&P9_22_gpio_pu_pin>; + pinctrl-3 = <&P9_22_gpio_pd_pin>; + pinctrl-4 = <&P9_22_gpio_input_pin>; + pinctrl-5 = <&P9_22_spi_sclk_pin>; + pinctrl-6 = <&P9_22_uart_pin>; + pinctrl-7 = <&P9_22_i2c_pin>; + pinctrl-8 = <&P9_22_pwm_pin>; + pinctrl-9 = <&P9_22_pru_uart_pin>; + }; + + /* P9_23 (ZCZ ball V14) */ + P9_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_23_default_pin>; + pinctrl-1 = <&P9_23_gpio_pin>; + pinctrl-2 = <&P9_23_gpio_pu_pin>; + pinctrl-3 = <&P9_23_gpio_pd_pin>; + pinctrl-4 = <&P9_23_gpio_input_pin>; + pinctrl-5 = <&P9_23_pwm_pin>; + }; + + /* P9_24 (ZCZ ball D15) */ + P9_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin"; + pinctrl-0 = <&P9_24_default_pin>; + pinctrl-1 = <&P9_24_gpio_pin>; + pinctrl-2 = <&P9_24_gpio_pu_pin>; + pinctrl-3 = <&P9_24_gpio_pd_pin>; + pinctrl-4 = <&P9_24_gpio_input_pin>; + pinctrl-5 = <&P9_24_uart_pin>; + pinctrl-6 = <&P9_24_can_pin>; + pinctrl-7 = <&P9_24_i2c_pin>; + pinctrl-8 = <&P9_24_pru_uart_pin>; + pinctrl-9 = <&P9_24_pruin_pin>; + }; + + /* P9_25 (ZCZ ball A14) audio */ + P9_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_25_default_pin>; + pinctrl-1 = <&P9_25_gpio_pin>; + pinctrl-2 = <&P9_25_gpio_pu_pin>; + pinctrl-3 = <&P9_25_gpio_pd_pin>; + pinctrl-4 = <&P9_25_gpio_input_pin>; + pinctrl-5 = <&P9_25_qep_pin>; + pinctrl-6 = <&P9_25_pruout_pin>; + pinctrl-7 = <&P9_25_pruin_pin>; + }; + + /* P9_26 (ZCZ ball D16) */ + P9_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin"; + pinctrl-0 = <&P9_26_default_pin>; + pinctrl-1 = <&P9_26_gpio_pin>; + pinctrl-2 = <&P9_26_gpio_pu_pin>; + pinctrl-3 = <&P9_26_gpio_pd_pin>; + pinctrl-4 = <&P9_26_gpio_input_pin>; + pinctrl-5 = <&P9_26_uart_pin>; + pinctrl-6 = <&P9_26_can_pin>; + pinctrl-7 = <&P9_26_i2c_pin>; + pinctrl-8 = <&P9_26_pru_uart_pin>; + pinctrl-9 = <&P9_26_pruin_pin>; + }; + + /* P9_27 (ZCZ ball C13) */ + P9_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_27_default_pin>; + pinctrl-1 = <&P9_27_gpio_pin>; + pinctrl-2 = <&P9_27_gpio_pu_pin>; + pinctrl-3 = <&P9_27_gpio_pd_pin>; + pinctrl-4 = <&P9_27_gpio_input_pin>; + pinctrl-5 = <&P9_27_qep_pin>; + pinctrl-6 = <&P9_27_pruout_pin>; + pinctrl-7 = <&P9_27_pruin_pin>; + }; + + /* P9_28 (ZCZ ball C12) audio */ + P9_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "pwm", "pwm2", "pruout", "pruin"; + pinctrl-0 = <&P9_28_default_pin>; + pinctrl-1 = <&P9_28_gpio_pin>; + pinctrl-2 = <&P9_28_gpio_pu_pin>; + pinctrl-3 = <&P9_28_gpio_pd_pin>; + pinctrl-4 = <&P9_28_gpio_input_pin>; + pinctrl-5 = <&P9_28_spi_cs_pin>; + pinctrl-6 = <&P9_28_pwm_pin>; + pinctrl-7 = <&P9_28_pwm2_pin>; + pinctrl-8 = <&P9_28_pruout_pin>; + pinctrl-9 = <&P9_28_pruin_pin>; + }; + + /* P9_29 (ZCZ ball B13) audio */ + P9_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P9_29_default_pin>; + pinctrl-1 = <&P9_29_gpio_pin>; + pinctrl-2 = <&P9_29_gpio_pu_pin>; + pinctrl-3 = <&P9_29_gpio_pd_pin>; + pinctrl-4 = <&P9_29_gpio_input_pin>; + pinctrl-5 = <&P9_29_spi_pin>; + pinctrl-6 = <&P9_29_pwm_pin>; + pinctrl-7 = <&P9_29_pruout_pin>; + pinctrl-8 = <&P9_29_pruin_pin>; + }; + + /* P9_30 (ZCZ ball D12) */ + P9_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P9_30_default_pin>; + pinctrl-1 = <&P9_30_gpio_pin>; + pinctrl-2 = <&P9_30_gpio_pu_pin>; + pinctrl-3 = <&P9_30_gpio_pd_pin>; + pinctrl-4 = <&P9_30_gpio_input_pin>; + pinctrl-5 = <&P9_30_spi_pin>; + pinctrl-6 = <&P9_30_pwm_pin>; + pinctrl-7 = <&P9_30_pruout_pin>; + pinctrl-8 = <&P9_30_pruin_pin>; + }; + + /* P9_31 (ZCZ ball A13) audio */ + P9_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P9_31_default_pin>; + pinctrl-1 = <&P9_31_gpio_pin>; + pinctrl-2 = <&P9_31_gpio_pu_pin>; + pinctrl-3 = <&P9_31_gpio_pd_pin>; + pinctrl-4 = <&P9_31_gpio_input_pin>; + pinctrl-5 = <&P9_31_spi_sclk_pin>; + pinctrl-6 = <&P9_31_pwm_pin>; + pinctrl-7 = <&P9_31_pruout_pin>; + pinctrl-8 = <&P9_31_pruin_pin>; + }; + + /* P9_32 VADC */ + + /* P9_33 (ZCZ ball C8) AIN4 */ + + /* P9_34 AGND */ + + /* P9_35 (ZCZ ball A8) AIN6 */ + + /* P9_36 (ZCZ ball B8) AIN5 */ + + /* P9_37 (ZCZ ball B7) AIN2 */ + + /* P9_38 (ZCZ ball A7) AIN3 */ + + /* P9_39 (ZCZ ball B6) AIN0 */ + + /* P9_40 (ZCZ ball C7) AIN1 */ + + /* P9_41 (ZCZ ball D14) */ + P9_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer", "pruin"; + pinctrl-0 = <&P9_41_default_pin>; + pinctrl-1 = <&P9_41_gpio_pin>; + pinctrl-2 = <&P9_41_gpio_pu_pin>; + pinctrl-3 = <&P9_41_gpio_pd_pin>; + pinctrl-4 = <&P9_41_gpio_input_pin>; + pinctrl-5 = <&P9_41_timer_pin>; + pinctrl-6 = <&P9_41_pruin_pin>; + }; + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) */ + P9_91_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_91_default_pin>; + pinctrl-1 = <&P9_91_gpio_pin>; + pinctrl-2 = <&P9_91_gpio_pu_pin>; + pinctrl-3 = <&P9_91_gpio_pd_pin>; + pinctrl-4 = <&P9_91_gpio_input_pin>; + pinctrl-5 = <&P9_91_qep_pin>; + pinctrl-6 = <&P9_91_pruout_pin>; + pinctrl-7 = <&P9_91_pruin_pin>; + }; + + /* P9_42 (ZCZ ball C18) */ + P9_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "spi_sclk", "uart", "pwm", "pru_ecap"; + pinctrl-0 = <&P9_42_default_pin>; + pinctrl-1 = <&P9_42_gpio_pin>; + pinctrl-2 = <&P9_42_gpio_pu_pin>; + pinctrl-3 = <&P9_42_gpio_pd_pin>; + pinctrl-4 = <&P9_42_gpio_input_pin>; + pinctrl-5 = <&P9_42_spi_cs_pin>; + pinctrl-6 = <&P9_42_spi_sclk_pin>; + pinctrl-7 = <&P9_42_uart_pin>; + pinctrl-8 = <&P9_42_pwm_pin>; + pinctrl-9 = <&P9_42_pru_ecap_pin>; + }; + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) */ + P9_92_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_92_default_pin>; + pinctrl-1 = <&P9_92_gpio_pin>; + pinctrl-2 = <&P9_92_gpio_pu_pin>; + pinctrl-3 = <&P9_92_gpio_pd_pin>; + pinctrl-4 = <&P9_92_gpio_input_pin>; + pinctrl-5 = <&P9_92_qep_pin>; + pinctrl-6 = <&P9_92_pruout_pin>; + pinctrl-7 = <&P9_92_pruin_pin>; + }; + + /* P9_43 GND */ + + /* P9_44 GND */ + + /* P9_45 GND */ + + /* P9_46 GND */ + + + cape-universal { + compatible = "gpio-of-helper"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + P8_03 { + gpio-name = "P8_03"; + gpio = <&gpio1 6 0>; + input; + dir-changeable; + }; + + P8_04 { + gpio-name = "P8_04"; + gpio = <&gpio1 7 0>; + input; + dir-changeable; + }; + + P8_05 { + gpio-name = "P8_05"; + gpio = <&gpio1 2 0>; + input; + dir-changeable; + }; + + P8_06 { + gpio-name = "P8_06"; + gpio = <&gpio1 3 0>; + input; + dir-changeable; + }; + + P8_07 { + gpio-name = "P8_07"; + gpio = <&gpio2 2 0>; + input; + dir-changeable; + }; + + P8_08 { + gpio-name = "P8_08"; + gpio = <&gpio2 3 0>; + input; + dir-changeable; + }; + + P8_09 { + gpio-name = "P8_09"; + gpio = <&gpio2 5 0>; + input; + dir-changeable; + }; + + P8_10 { + gpio-name = "P8_10"; + gpio = <&gpio2 4 0>; + input; + dir-changeable; + }; + + P8_11 { + gpio-name = "P8_11"; + gpio = <&gpio1 13 0>; + input; + dir-changeable; + }; + + P8_12 { + gpio-name = "P8_12"; + gpio = <&gpio1 12 0>; + input; + dir-changeable; + }; + + P8_13 { + gpio-name = "P8_13"; + gpio = <&gpio0 23 0>; + input; + dir-changeable; + }; + + P8_14 { + gpio-name = "P8_14"; + gpio = <&gpio0 26 0>; + input; + dir-changeable; + }; + + P8_15 { + gpio-name = "P8_15"; + gpio = <&gpio1 15 0>; + input; + dir-changeable; + }; + + P8_16 { + gpio-name = "P8_16"; + gpio = <&gpio1 14 0>; + input; + dir-changeable; + }; + + P8_17 { + gpio-name = "P8_17"; + gpio = <&gpio0 27 0>; + input; + dir-changeable; + }; + + P8_18 { + gpio-name = "P8_18"; + gpio = <&gpio2 1 0>; + input; + dir-changeable; + }; + + P8_19 { + gpio-name = "P8_19"; + gpio = <&gpio0 22 0>; + input; + dir-changeable; + }; + + P8_20 { + gpio-name = "P8_20"; + gpio = <&gpio1 31 0>; + input; + dir-changeable; + }; + + P8_21 { + gpio-name = "P8_21"; + gpio = <&gpio1 30 0>; + input; + dir-changeable; + }; + + P8_22 { + gpio-name = "P8_22"; + gpio = <&gpio1 5 0>; + input; + dir-changeable; + }; + + P8_23 { + gpio-name = "P8_23"; + gpio = <&gpio1 4 0>; + input; + dir-changeable; + }; + + P8_24 { + gpio-name = "P8_24"; + gpio = <&gpio1 1 0>; + input; + dir-changeable; + }; + + P8_25 { + gpio-name = "P8_25"; + gpio = <&gpio1 0 0>; + input; + dir-changeable; + }; + + P8_26 { + gpio-name = "P8_26"; + gpio = <&gpio1 29 0>; + input; + dir-changeable; + }; + + P8_27 { + gpio-name = "P8_27"; + gpio = <&gpio2 22 0>; + input; + dir-changeable; + }; + + P8_28 { + gpio-name = "P8_28"; + gpio = <&gpio2 24 0>; + input; + dir-changeable; + }; + + P8_29 { + gpio-name = "P8_29"; + gpio = <&gpio2 23 0>; + input; + dir-changeable; + }; + + P8_30 { + gpio-name = "P8_30"; + gpio = <&gpio2 25 0>; + input; + dir-changeable; + }; + + P8_31 { + gpio-name = "P8_31"; + gpio = <&gpio0 10 0>; + input; + dir-changeable; + }; + + P8_32 { + gpio-name = "P8_32"; + gpio = <&gpio0 11 0>; + input; + dir-changeable; + }; + + P8_33 { + gpio-name = "P8_33"; + gpio = <&gpio0 9 0>; + input; + dir-changeable; + }; + + P8_34 { + gpio-name = "P8_34"; + gpio = <&gpio2 17 0>; + input; + dir-changeable; + }; + + P8_35 { + gpio-name = "P8_35"; + gpio = <&gpio0 8 0>; + input; + dir-changeable; + }; + + P8_36 { + gpio-name = "P8_36"; + gpio = <&gpio2 16 0>; + input; + dir-changeable; + }; + + P8_37 { + gpio-name = "P8_37"; + gpio = <&gpio2 14 0>; + input; + dir-changeable; + }; + + P8_38 { + gpio-name = "P8_38"; + gpio = <&gpio2 15 0>; + input; + dir-changeable; + }; + + P8_39 { + gpio-name = "P8_39"; + gpio = <&gpio2 12 0>; + input; + dir-changeable; + }; + + P8_40 { + gpio-name = "P8_40"; + gpio = <&gpio2 13 0>; + input; + dir-changeable; + }; + + P8_41 { + gpio-name = "P8_41"; + gpio = <&gpio2 10 0>; + input; + dir-changeable; + }; + + P8_42 { + gpio-name = "P8_42"; + gpio = <&gpio2 11 0>; + input; + dir-changeable; + }; + + P8_43 { + gpio-name = "P8_43"; + gpio = <&gpio2 8 0>; + input; + dir-changeable; + }; + + P8_44 { + gpio-name = "P8_44"; + gpio = <&gpio2 9 0>; + input; + dir-changeable; + }; + + P8_45 { + gpio-name = "P8_45"; + gpio = <&gpio2 6 0>; + input; + dir-changeable; + }; + + P8_46 { + gpio-name = "P8_46"; + gpio = <&gpio2 7 0>; + input; + dir-changeable; + }; + + P9_11 { + gpio-name = "P9_11"; + gpio = <&gpio0 30 0>; + input; + dir-changeable; + }; + + P9_12 { + gpio-name = "P9_12"; + gpio = <&gpio1 28 0>; + input; + dir-changeable; + }; + + P9_13 { + gpio-name = "P9_13"; + gpio = <&gpio0 31 0>; + input; + dir-changeable; + }; + + P9_14 { + gpio-name = "P9_14"; + gpio = <&gpio1 18 0>; + input; + dir-changeable; + }; + + P9_15 { + gpio-name = "P9_15"; + gpio = <&gpio1 16 0>; + input; + dir-changeable; + }; + + P9_16 { + gpio-name = "P9_16"; + gpio = <&gpio1 19 0>; + input; + dir-changeable; + }; + + P9_17 { + gpio-name = "P9_17"; + gpio = <&gpio0 5 0>; + input; + dir-changeable; + }; + + P9_18 { + gpio-name = "P9_18"; + gpio = <&gpio0 4 0>; + input; + dir-changeable; + }; + + P9_19 { + gpio-name = "P9_19"; + gpio = <&gpio0 13 0>; + input; + dir-changeable; + }; + + P9_20 { + gpio-name = "P9_20"; + gpio = <&gpio0 12 0>; + input; + dir-changeable; + }; + + P9_21 { + gpio-name = "P9_21"; + gpio = <&gpio0 3 0>; + input; + dir-changeable; + }; + + P9_22 { + gpio-name = "P9_22"; + gpio = <&gpio0 2 0>; + input; + dir-changeable; + }; + + P9_23 { + gpio-name = "P9_23"; + gpio = <&gpio1 17 0>; + input; + dir-changeable; + }; + + P9_24 { + gpio-name = "P9_24"; + gpio = <&gpio0 15 0>; + input; + dir-changeable; + }; + + P9_25 { + gpio-name = "P9_25"; + gpio = <&gpio3 21 0>; + input; + dir-changeable; + }; + + P9_26 { + gpio-name = "P9_26"; + gpio = <&gpio0 14 0>; + input; + dir-changeable; + }; + + P9_27 { + gpio-name = "P9_27"; + gpio = <&gpio3 19 0>; + input; + dir-changeable; + }; + + P9_28 { + gpio-name = "P9_28"; + gpio = <&gpio3 17 0>; + input; + dir-changeable; + }; + + P9_29 { + gpio-name = "P9_29"; + gpio = <&gpio3 15 0>; + input; + dir-changeable; + }; + + P9_30 { + gpio-name = "P9_30"; + gpio = <&gpio3 16 0>; + input; + dir-changeable; + }; + + P9_31 { + gpio-name = "P9_31"; + gpio = <&gpio3 14 0>; + input; + dir-changeable; + }; + + P9_41 { + gpio-name = "P9_41"; + gpio = <&gpio0 20 0>; + input; + dir-changeable; + }; + + P9_91 { + gpio-name = "P9_91"; + gpio = <&gpio3 20 0>; + input; + dir-changeable; + }; + + P9_42 { + gpio-name = "P9_42"; + gpio = <&gpio0 7 0>; + input; + dir-changeable; + }; + + P9_92 { + gpio-name = "P9_92"; + gpio = <&gpio3 18 0>; + input; + dir-changeable; + }; + + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 73b514d..167fb22 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -29,14 +29,14 @@ compatible = "gpio-leds"; led2 { - label = "beaglebone:green:heartbeat"; + label = "beaglebone:green:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led3 { - label = "beaglebone:green:mmc0"; + label = "beaglebone:green:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; @@ -66,9 +66,6 @@ }; &am33xx_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin>; - user_leds_s0: user_leds_s0 { pinctrl-single,pins = < AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ @@ -99,15 +96,11 @@ >; }; - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; - }; - cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ @@ -127,6 +120,8 @@ cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -417,4 +412,5 @@ &rtc { clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; + system-power-controller; }; diff --git b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi new file mode 100644 index 0000000..7d8f673 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* standard */ + +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-jtag.dtsi b/arch/arm/boot/dts/am335x-bone-jtag.dtsi new file mode 100644 index 0000000..603ef0a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-jtag.dtsi @@ -0,0 +1,20 @@ +/* + * Device Tree Source for bone jtag + * + * Copyright (C) 2015 Robert Nelson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi new file mode 100644 index 0000000..0961216 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-can0.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_19_pinmux { + * mode = "can"; + * }; + * P9_20_pinmux { + * mode = "can"; + * }; + *}; + * + *&dcan0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + dcan0_pins: pinmux_dcan0_pins { + pinctrl-single,pins = < + /* P9_20: uart1_ctsn.d_can0_tx */ + BONE_P9_20 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_19: uart1_rtsn.d_can0_rx */ + BONE_P9_19 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; +}; + +&dcan0 { + pinctrl-0 = <&dcan0_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi new file mode 100644 index 0000000..9e26413 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-can1.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_24_pinmux { + * mode = "can"; + * }; + * P9_26_pinmux { + * mode = "can"; + * }; + *}; + * + *&dcan1 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* P9_26: uart1_rxd.d_can1_tx */ + BONE_P9_26 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_24: uart1_txd.d_can1_rx */ + BONE_P9_24 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; +}; + +&dcan1 { + pinctrl-0 = <&dcan1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi new file mode 100644 index 0000000..22cf462 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* lsblk */ + +#include +#include "am335x-peripheral-emmc.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_21_pinmux { + * state = "disabled"; + * }; + * P8_20_pinmux { + * state = "disabled"; + * }; + * P8_25_pinmux { + * state = "disabled"; + * }; + * P8_24_pinmux { + * state = "disabled"; + * }; + * P8_05_pinmux { + * state = "disabled"; + * }; + * P8_06_pinmux { + * state = "disabled"; + * }; + * P8_23_pinmux { + * state = "disabled"; + * }; + * P8_22_pinmux { + * state = "disabled"; + * }; + * P8_03_pinmux { + * state = "disabled"; + * }; + * P8_04_pinmux { + * state = "disabled"; + * }; + *}; + * + *&mmc2 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + /* P8_21: gpmc_csn1.mmc1_clk */ + BONE_P8_21 (PIN_INPUT_PULLUP | MUX_MODE2) + /* P8_20: gpmc_csn2.mmc1_cmd */ + BONE_P8_20 (PIN_INPUT_PULLUP | MUX_MODE2) + /* P8_25: gpmc_ad0.mmc1_dat0 */ + BONE_P8_25 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_24: gpmc_ad1.mmc1_dat1 */ + BONE_P8_24 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_05: gpmc_ad2.mmc1_dat2 */ + BONE_P8_05 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_06: gpmc_ad3.mmc1_dat3 */ + BONE_P8_06 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_23: gpmc_ad4.mmc1_dat4 */ + BONE_P8_23 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_22: gpmc_ad5.mmc1_dat5 */ + BONE_P8_22 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_03: gpmc_ad6.mmc1_dat6 */ + BONE_P8_03 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_04: gpmc_ad7.mmc1_dat7 */ + BONE_P8_04 (PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; +}; + +&mmc2 { + pinctrl-0 = <&emmc_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi new file mode 100644 index 0000000..abf3b57 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-i2c2.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_19_pinmux { + * mode = "i2c"; + * }; + * P9_20_pinmux { + * mode = "i2c"; + * }; + *}; + * + *&dcan0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + /* P9_20: uart1_ctsn.i2c2_sda */ + BONE_P9_20 (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) + /* P9_19: uart1_rtsn.i2c2_scl */ + BONE_P9_19 (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi new file mode 100644 index 0000000..5205fa0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi @@ -0,0 +1,120 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am335x-peripheral-nxp-hdmi.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_27_pinmux { + * state = "disabled"; + * }; + * P8_28_pinmux { + * state = "disabled"; + * }; + * P8_29_pinmux { + * state = "disabled"; + * }; + * P8_30_pinmux { + * state = "disabled"; + * }; + * P8_31_pinmux { + * state = "disabled"; + * }; + * P8_32_pinmux { + * state = "disabled"; + * }; + * P8_33_pinmux { + * state = "disabled"; + * }; + * P8_34_pinmux { + * state = "disabled"; + * }; + * P8_35_pinmux { + * state = "disabled"; + * }; + * P8_36_pinmux { + * state = "disabled"; + * }; + * P8_37_pinmux { + * state = "disabled"; + * }; + * P8_38_pinmux { + * state = "disabled"; + * }; + * P8_39_pinmux { + * state = "disabled"; + * }; + * P8_40_pinmux { + * state = "disabled"; + * }; + * P8_41_pinmux { + * state = "disabled"; + * }; + * P8_42_pinmux { + * state = "disabled"; + * }; + * P8_43_pinmux { + * state = "disabled"; + * }; + * P8_44_pinmux { + * state = "disabled"; + * }; + * P8_45_pinmux { + * state = "disabled"; + * }; + * P8_46_pinmux { + * state = "disabled"; + * }; + *}; + */ + +/* standard */ + +&am33xx_pinmux { + nxp_hdmi_pins: pinmux_nxp_hdmi_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + nxp_hdmi_off_pins: nxp_hdmi_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; +}; + +&i2c0 { + tda19988 { + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi new file mode 100644 index 0000000..65e5fbb --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_27_pinmux { + * state = "disabled"; + * }; + * P8_28_pinmux { + * state = "disabled"; + * }; + * P8_29_pinmux { + * state = "disabled"; + * }; + * P8_30_pinmux { + * state = "disabled"; + * }; + * P8_31_pinmux { + * state = "disabled"; + * }; + * P8_32_pinmux { + * state = "disabled"; + * }; + * P8_33_pinmux { + * state = "disabled"; + * }; + * P8_34_pinmux { + * state = "disabled"; + * }; + * P8_35_pinmux { + * state = "disabled"; + * }; + * P8_36_pinmux { + * state = "disabled"; + * }; + * P8_37_pinmux { + * state = "disabled"; + * }; + * P8_38_pinmux { + * state = "disabled"; + * }; + * P8_39_pinmux { + * state = "disabled"; + * }; + * P8_40_pinmux { + * state = "disabled"; + * }; + * P8_41_pinmux { + * state = "disabled"; + * }; + * P8_42_pinmux { + * state = "disabled"; + * }; + * P8_43_pinmux { + * state = "disabled"; + * }; + * P8_44_pinmux { + * state = "disabled"; + * }; + * P8_45_pinmux { + * state = "disabled"; + * }; + * P8_46_pinmux { + * state = "disabled"; + * }; + *}; + */ + +/* standard */ + +&am33xx_pinmux { + lcd_24bit_pins: pinmux_lcd_24bit_pins { + pinctrl-single,pins = < + + /* P8_45: lcd_data0.lcd_data0 */ + BONE_P8_45 (PIN_OUTPUT | MUX_MODE0) + /* P8_46: lcd_data1.lcd_data1 */ + BONE_P8_46 (PIN_OUTPUT | MUX_MODE0) + /* P8_43: lcd_data2.lcd_data2 */ + BONE_P8_43 (PIN_OUTPUT | MUX_MODE0) + /* P8_44: lcd_data3.lcd_data3 */ + BONE_P8_44 (PIN_OUTPUT | MUX_MODE0) + /* P8_41: lcd_data4.lcd_data4 */ + BONE_P8_41 (PIN_OUTPUT | MUX_MODE0) + /* P8_42: lcd_data5.lcd_data5 */ + BONE_P8_42 (PIN_OUTPUT | MUX_MODE0) + /* P8_39: lcd_data6.lcd_data6 */ + BONE_P8_39 (PIN_OUTPUT | MUX_MODE0) + /* P8_40: lcd_data7.lcd_data7 */ + BONE_P8_40 (PIN_OUTPUT | MUX_MODE0) + /* P8_37: lcd_data8.lcd_data8 */ + BONE_P8_37 (PIN_OUTPUT | MUX_MODE0) + /* P8_38: lcd_data9.lcd_data9 */ + BONE_P8_38 (PIN_OUTPUT | MUX_MODE0) + /* P8_36: lcd_data10.lcd_data10 */ + BONE_P8_36 (PIN_OUTPUT | MUX_MODE0) + /* P8_34: lcd_data11.lcd_data11 */ + BONE_P8_34 (PIN_OUTPUT | MUX_MODE0) + /* P8_35: lcd_data12.lcd_data12 */ + BONE_P8_35 (PIN_OUTPUT | MUX_MODE0) + /* P8_33: lcd_data13.lcd_data13 */ + BONE_P8_33 (PIN_OUTPUT | MUX_MODE0) + /* P8_31: lcd_data14.lcd_data14 */ + BONE_P8_31 (PIN_OUTPUT | MUX_MODE0) + /* P8_32: lcd_data15.lcd_data15 */ + BONE_P8_32 (PIN_OUTPUT | MUX_MODE0) + + /* gpmc_ad15.lcd_data16 */ + BONE_P8_15 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad14.lcd_data17 */ + BONE_P8_16 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad13.lcd_data18 */ + BONE_P8_11 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad12.lcd_data19 */ + BONE_P8_12 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad11.lcd_data20 */ + BONE_P8_17 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad10.lcd_data21 */ + BONE_P8_14 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad9.lcd_data22 */ + BONE_P8_13 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad8.lcd_data23 */ + BONE_P8_19 (PIN_OUTPUT | MUX_MODE1) + + /* P8_27: lcd_vsync.lcd_vsync */ + BONE_P8_27 (PIN_OUTPUT | MUX_MODE0) + /* P8_29: lcd_hsync.lcd_hsync */ + BONE_P8_29 (PIN_OUTPUT | MUX_MODE0) + /* P8_28: lcd_pclk.lcd_pclk*/ + BONE_P8_28 (PIN_OUTPUT | MUX_MODE0) + /* P8_30: lcd_ac_bias_en.lcd_ac_bias_en */ + BONE_P8_30 (PIN_OUTPUT | MUX_MODE0) + >; + }; +}; + +/ { + panel { + pinctrl-0 = <&lcd_24bit_pins>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi new file mode 100644 index 0000000..354e66a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi0.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_17_pinmux { + * status = "disabled"; + * }; + * P9_18_pinmux { + * status = "disabled"; + * }; + * P9_21_pinmux { + * status = "disabled"; + * }; + * P9_22_pinmux { + * status = "disabled"; + * }; + *}; + * + *&spi0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ + 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ + 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + >; + }; +}; + +&spi0 { + pinctrl-0 = <&spi0_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi new file mode 100644 index 0000000..bff7f8d --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi1.dtsi" + +/* standard */ + +&am33xx_pinmux { + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + 0x190 0x33 /* mcasp0_aclkx.spi1_sclk, INPUT_PULLUP | MODE3 */ + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */ + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */ + 0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */ + // 0x164 0x12 /* eCAP0_in_PWM0_out.spi1_cs1 OUTPUT_PULLUP | MODE2 */ >; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi new file mode 100644 index 0000000..62874c8 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi1.dtsi" + +/* standard */ + +&am33xx_pinmux { + spi1a_pins: pinmux_spi1a_pins { + pinctrl-single,pins = < + 0x164 0x34 /* eCAP0_in_PWM0_out.spi1_sclk, INPUT_PULLUP | MODE4 */ + /* NOTE: P9.42 is connected to two pads */ + // 0x1A0 0x27 /* set the other pad to gpio input */ + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */ + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */ + 0x178 0x14 /* uart1_ctsn.spi1_cs0, OUTPUT_PULLUP | MODE4 */ >; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1a_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi new file mode 100644 index 0000000..ae5b813 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS1 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS1.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_24_pinmux { + * mode = "uart"; + * }; + * P9_26_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart1 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + /* P9_24: uart1_txd.uart1_txd */ + BONE_P9_24 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P9_26: uart1_rxd.uart1_rxd */ + BONE_P9_26 (PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi new file mode 100644 index 0000000..5fa593a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS2 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS2.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_21_pinmux { + * mode = "uart"; + * }; + * P9_22_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart2 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + /* P9_21: spi0_d0.uart2_txd */ + BONE_P9_21 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) + /* P9_22: spi0_sclk.uart2_rxd */ + BONE_P9_22 (PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi new file mode 100644 index 0000000..1d22a95 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS4 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS4.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_11_pinmux { + * mode = "uart"; + * }; + * P9_13_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart4 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + /* P9_11: gpmc_wait0.uart4_rxd_mux2 */ + BONE_P9_11 (PIN_INPUT_PULLUP | MUX_MODE6) + /* P9_13: gpmc_wpn.uart4_txd_mux2 */ + BONE_P9_13 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) + >; + }; +}; + +&uart4 { + pinctrl-0 = <&uart4_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi new file mode 100644 index 0000000..01d0aec --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS5 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS5.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_37_pinmux { + * mode = "uart"; + * }; + * P8_38_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart5 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + /* P8_38: lcd_data9.uart5_rxd */ + BONE_P8_38 (PIN_INPUT_PULLUP | MUX_MODE4) + /* P8_37: lcd_data8.uart5_txd */ + BONE_P8_37 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) + >; + }; +}; + +&uart5 { + pinctrl-0 = <&uart5_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-uboot-univ.dts b/arch/arm/boot/dts/am335x-bone-uboot-univ.dts new file mode 100644 index 0000000..24cc695 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-uboot-univ.dts @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bone-common-univ.dtsi" + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&ldo3_reg>; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 6b84937..3688fff 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -9,6 +9,7 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone"; diff --git b/arch/arm/boot/dts/am335x-boneblack-audio.dts b/arch/arm/boot/dts/am335x-boneblack-audio.dts new file mode 100644 index 0000000..a938c2c --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-audio.dts @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts new file mode 100644 index 0000000..8d795c0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +#include "am335x-cape-bbb-exp-c.dtsi" diff --git b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts new file mode 100644 index 0000000..5df881e --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +#include "am335x-cape-bbb-exp-r.dtsi" diff --git b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts new file mode 100644 index 0000000..34c1f17 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Modified by Mirko Denecke + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include +#include + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* P9_26: uart1_rxd.d_can1_tx */ + BONE_P9_26 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_24: uart1_txd.d_can1_rx */ + BONE_P9_24 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; + + pru_pins: pinmux_pru_pins { + pinctrl-single,pins = < + 0x03c 0x35 /* ecap0_in_pwm0_out.pr1_ecap0_ecap_capin, MODE5 | INPUT_PULLUP | PRU, PPM-sum, SBUS, DSM */ + + 0x0e8 0x25 /* lcd_pclk.pr1_pru1_pru_r30_10, MODE5 | OUTPUT | PRU, CH_1 */ + 0x0e0 0x25 /* lcd_vsync.pr1_pru1_pru_r30_8, MODE5 | OUTPUT | PRU, CH_2 */ + 0x0ec 0x25 /* lcd_ac_bias_en.pr1_pru1_pru_r30_11, MODE5 | OUTPUT | PRU, CH_3 */ + 0x0e4 0x25 /* lcd_hsync.pr1_pru1_pru_r30_9, MODE5 | OUTPUT | PRU, CH_4 */ + 0x0bc 0x25 /* lcd_data7.pr1_pru1_pru_r30_7, MODE5 | OUTPUT | PRU, CH_5 */ + 0x0b8 0x25 /* lcd_data6.pr1_pru1_pru_r30_6, MODE5 | OUTPUT | PRU, CH_6 */ + 0x0b4 0x25 /* lcd_data5.pr1_pru1_pru_r30_5, MODE5 | OUTPUT | PRU, CH_7 */ + 0x0b0 0x25 /* lcd_data4.pr1_pru1_pru_r30_4, MODE5 | OUTPUT | PRU, CH_8 */ + 0x0ac 0x25 /* lcd_data3.pr1_pru1_pru_r30_3, MODE5 | OUTPUT | PRU, CH_9 */ + 0x0a8 0x25 /* lcd_data2.pr1_pru1_pru_r30_2, MODE5 | OUTPUT | PRU, CH_10 */ + 0x0a4 0x25 /* lcd_data1.pr1_pru1_pru_r30_1, MODE5 | OUTPUT | PRU, CH_11 */ + 0x0a0 0x25 /* lcd_data0.pr1_pru1_pru_r30_0, MODE5 | OUTPUT | PRU, CH_12 */ + + BONE_P8_12 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* HC-SR04 TRIG */ + BONE_P8_16 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* HC-SR04 ECHO */ + + BONE_P9_25 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* MPU9250 INT */ + >; + }; + + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + /* P9_22: spi0_sclk.spi0_sclk */ + BONE_P9_22 (PIN_INPUT_PULLUP | MUX_MODE0) + /* P9_21: spi0_d0.spi0_d0 */ + BONE_P9_21 (PIN_INPUT_PULLUP | MUX_MODE0) + /* P9_18: spi0_d1.spi0_d1 */ + BONE_P9_18 (PIN_OUTPUT_PULLUP | MUX_MODE0) + /* P9_17: spi0_cs0.spi0_cs0 */ + BONE_P9_17 (PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + /* P9_31: mcasp0_aclkx.spi1_sclk */ + BONE_P9_31 (PIN_INPUT_PULLUP | MUX_MODE3) + + /* P9_29: mcasp0_fsx.spi1_d0 */ + BONE_P9_29 (PIN_INPUT_PULLUP | MUX_MODE3) + + /* P9_30: mcasp0_axr0.spi1_d1 */ + BONE_P9_30 (PIN_OUTPUT_PULLUP | MUX_MODE3) + + /* P9_28: mcasp0_ahclkr.spi1_cs0 */ + BONE_P9_28 (PIN_OUTPUT_PULLUP | MUX_MODE3) + + /* P9_19: uart1_rtsn.spi1_cs1 */ +/* BONE_P9_19 (PIN_OUTPUT_PULLUP | MUX_MODE4)*/ + + /* P9_42: ecap0_in_pwm0_out.spi1_cs1 */ + BONE_P9_42A (PIN_OUTPUT_PULLUP | MUX_MODE2) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + /* P9_11: gpmc_wait0.uart4_rxd_mux2 */ + BONE_P9_11 (PIN_INPUT_PULLUP | MUX_MODE6) + /* P9_13: gpmc_wpn.uart4_txd_mux2 */ + BONE_P9_13 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) + >; + }; + + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + /* P8_38: lcd_data9.uart5_rxd */ + BONE_P8_38 (PIN_INPUT_PULLUP | MUX_MODE4) + /* P8_37: lcd_data8.uart5_txd */ + BONE_P8_37 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) + >; + }; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi0@0 { + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <24000000>; + reg = <0>; + compatible = "spidev"; + symlink = "spi/0.0"; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi1@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + spi-max-frequency = <24000000>; + compatible = "spidev"; + symlink = "spi/1.0"; + }; + + spi1@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + spi-max-frequency = <24000000>; + compatible = "spidev"; + symlink = "spi/1.1"; + }; +}; + +&tscadc { + adc { + ti,adc-channels = <0 1>; + }; +}; + +//&pruss { +// pinctrl-names = "default"; +// pinctrl-0 = <&pru_pins>; +// status = "okay"; +//}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi index 325daae..728a13e 100644 --- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi +++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi @@ -29,7 +29,6 @@ &am33xx_pinmux { nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ @@ -53,12 +52,6 @@ >; }; - nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - >; - }; - mcasp0_pins: mcasp0_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ @@ -92,9 +85,8 @@ compatible = "nxp,tda998x"; reg = <0x70>; - pinctrl-names = "default", "off"; + pinctrl-names = "default"; pinctrl-0 = <&nxp_hdmi_bonelt_pins>; - pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ /* video-ports = <0x234501>; */ diff --git b/arch/arm/boot/dts/am335x-boneblack-uboot-univ.dts b/arch/arm/boot/dts/am335x-boneblack-uboot-univ.dts new file mode 100644 index 0000000..7b4bf96 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-uboot-univ.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bone-common-univ.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro-1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-uboot.dts b/arch/arm/boot/dts/am335x-boneblack-uboot.dts new file mode 100644 index 0000000..738fa39 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-uboot.dts @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro-1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts index 83f49f6..4664f20 100644 --- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -11,6 +11,7 @@ #include "am335x-bone-common.dtsi" #include "am335x-boneblack-common.dtsi" #include +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone Black Wireless"; diff --git b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi new file mode 100644 index 0000000..94caa22 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + +/ { + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WL_EN */ + gpio = <&gpio0 26 0>; + enable-active-high; + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <44>; /* Bank1, pin12 */ + dev_name = "/dev/ttyO4"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_12 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + mmc2_pins_sleep: pinmux_mmc2_pins_sleep { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + uart4_pins_default: pinmux_uart4_pins_default { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT | MUX_MODE6) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */ + >; + }; + + uart4_pins_sleep: pinmux_uart4_pins_sleep { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wpn.uart4_txd */ + >; + }; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc2_pins &wlan_pins>; + pinctrl-1 = <&mmc2_pins_sleep &wlan_pins_sleep>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart4_pins_default>; + pinctrl-1 = <&uart4_pins_sleep>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts new file mode 100644 index 0000000..be7cab3 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +#include "am335x-boneblack-wl1835mod-cape.dtsi" diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index d154d31..e620232 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -10,6 +10,7 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" #include "am335x-boneblack-common.dtsi" +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone Black"; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 7bcd726..1a24efd 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -125,9 +125,179 @@ gpio = <&gpio3 9 0>; enable-active-high; }; + + bt_en { + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + compatible = "gpio-leds"; + + wl18xx_bt_en { + label = "wl18xx_bt_en"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro-1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; }; &am33xx_pinmux { + /*************************************************************************** + * Static Pinmux + ***************************************************************************/ + mux_helper_pins: pins { + pinctrl-single,pins = < + + /* GPIO Inputs */ + 0x09c 0x37 /*P8.9 Pause BUTTON, input pullup*/ + 0x098 0x37 /*P8.10 MODE BUTTON input pullup*/ + 0x1AC 0x37 /*P9.25 MPU-9150 INTERRUPT IN*/ + + /* Motor Control GPIO Out*/ + 0x088 ( PIN_OUTPUT | MUX_MODE7 ) /* (T13) gpmc_csn3.gpio2[0] - MDIR_1A different from cape! */ + 0x074 ( PIN_OUTPUT | MUX_MODE7 ) /* (U17) gpmc_wpn.gpio0[31] - P9.13, MDIR_1B */ + 0x040 ( PIN_OUTPUT | MUX_MODE7 ) /* (R13) gpmc_a0.gpio1[16] - P9.15, MDIR_2A */ + 0x0D8 ( PIN_OUTPUT | MUX_MODE7 ) /* (V4) lcd_data14.gpio0[10] - P8.31, MDIR_2B different from cape! */ + 0x0AC ( PIN_OUTPUT | MUX_MODE7 ) /* (R4) lcd_data3.gpio2[9] - P8.44, MDIR_3A */ + 0x0A8 ( PIN_OUTPUT | MUX_MODE7 ) /* (R3) lcd_data2.gpio2[8] - P8.43, MDIR_3B */ + 0x0A0 ( PIN_OUTPUT | MUX_MODE7 ) /* (R1) lcd_data0.gpio2[6] - P8.45, MDIR_4A */ + 0x0A4 ( PIN_OUTPUT | MUX_MODE7 ) /* (R2) lcd_data1.gpio2[7] - P8.46, MDIR_4B */ + 0x1B4 ( PIN_OUTPUT | MUX_MODE7 ) /* (D14) xdma_event_intr1.gpio0[20] - P9.41, MOT_STBY */ + + /* PRU encoder input */ + 0x038 0x36 /* P8_16,PRU0_r31_16,MODE6 */ + + /* PRU Servo output */ + 0x0e0 0x05 /*pru1_pru_r30_8, MODE5*/ + 0x0e8 0x05 /*pru1_pru_r30_10, MODE5 */ + 0x0e4 0x05 /*pr1_pru1_pru_r30_9, MODE5 */ + 0x0ec 0x05 /*pru1_pru_r30_11, MODE5 */ + 0x0b8 0x05 /*pru1_pru_r30_6, MODE5 */ + 0x0bc 0x05 /*pru1_pru_r30_7, MODE5 */ + 0x0b0 0x05 /*pru1_pru_r30_4, MODE5 */ + 0x0b4 0x05 /*pru1_pru_r30_5, MODE5 */ + 0x0C8 0x0F /*P8.36, SERVO_PWR GPIO OUT*/ + + /* WILINK 8 */ + 0x08c 0x0F /*P8.18 V12 A2DP FSYNC */ + 0x078 0x0F /*P9.12 A2DP_CLOCK*/ + >; + + /* D13 BLUE_GP0_PIN_5 gpio 3_20 */ + D13_default_pin: pinmux_D13_default_pin { + pinctrl-single,pins = < 0x1A8 ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + D13_gpio_pin: pinmux_D13_gpio_pin { + pinctrl-single,pins = < 0x1A8 ( PIN_OUTPUT | MUX_MODE7 ) >; }; + D13_gpio_pu_pin: pinmux_D13_gpio_pu_pin { + pinctrl-single,pins = < 0x1A8 ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + D13_gpio_pd_pin: pinmux_D13_gpio_pd_pin { + pinctrl-single,pins = < 0x1A8 ( PIN_INPUT_PULLDOWN | MUX_MODE7 ) >; }; + + /* H17 BLUE_GP1_PIN_4 gpio 3_1 */ + H17_default_pin: pinmux_H17_default_pin { + pinctrl-single,pins = < 0x10C ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + H17_gpio_pin: pinmux_H17_gpio_pin { + pinctrl-single,pins = < 0x10C ( PIN_OUTPUT | MUX_MODE7 ) >; }; + H17_gpio_pu_pin: pinmux_H17_gpio_pu_pin { + pinctrl-single,pins = < 0x10C ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + H17_gpio_pd_pin: pinmux_H17_gpio_pd_pin { + pinctrl-single,pins = < 0x10C ( PIN_INPUT_PULLDOWN | MUX_MODE7 ) >; }; + + /* J15 BLUE_GP1_PIN_3 gpio 3_2 */ + J15_default_pin: pinmux_J15_default_pin { + pinctrl-single,pins = < 0x110 ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + J15_gpio_pin: pinmux_J15_gpio_pin { + pinctrl-single,pins = < 0x110 ( PIN_OUTPUT | MUX_MODE7 ) >; }; + J15_gpio_pu_pin: pinmux_J15_gpio_pu_pin { + pinctrl-single,pins = < 0x110 ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + J15_gpio_pd_pin: pinmux_J15_gpio_pd_pin { + pinctrl-single,pins = < 0x110 ( PIN_INPUT_PULLDOWN | MUX_MODE7 ) >; }; + + /* P8_15 (ZCZ ball U13) */ + P8_15_default_pin: pinmux_P8_15_default_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_gpio_pin: pinmux_P8_15_gpio_pin { + pinctrl-single,pins = <0x03c 0x2F>; }; /* Mode 7, RxActive */ + P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { + pinctrl-single,pins = <0x03c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_pruin_pin: pinmux_P8_15_pruin_pin { + pinctrl-single,pins = <0x03c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_15_qep_pin: pinmux_P8_15_qep_pin { + pinctrl-single,pins = <0x03c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_15_pruin_pu_pin: pinmux_P8_15_pruin_pu_pin { + pinctrl-single,pins = <0x03c 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + P8_15_pruecapin_pu_pin: pinmux_P8_15_pruecapin_pu_pin { + pinctrl-single,pins = <0x03c 0x35>; }; /* Mode 5, Pull-Up, RxActive */ + + /* P9_11 (ZCZ ball T17) */ + P9_11_default_pin: pinmux_P9_11_default_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pin: pinmux_P9_11_gpio_pin { + pinctrl-single,pins = <0x070 0x2F>; }; /* Mode 7, RxActive */ + P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { + pinctrl-single,pins = <0x070 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_11_uart_pin: pinmux_P9_11_uart_pin { + pinctrl-single,pins = <0x070 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_23 (ZCZ ball V14) */ + P9_23_default_pin: pinmux_P9_23_default_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_gpio_pin: pinmux_P9_23_gpio_pin { + pinctrl-single,pins = <0x044 0x2F>; }; /* Mode 7, RxActive */ + P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { + pinctrl-single,pins = <0x044 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_pwm_pin: pinmux_P9_23_pwm_pin { + pinctrl-single,pins = <0x044 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_28 (ZCZ ball C12) Audio */ + P9_28_default_pin: pinmux_P9_28_default_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_gpio_pin: pinmux_P9_28_gpio_pin { + pinctrl-single,pins = <0x19c 0x2F>; }; /* Mode 7, RxActive */ + P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { + pinctrl-single,pins = <0x19c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_pwm_pin: pinmux_P9_28_pwm_pin { + pinctrl-single,pins = <0x19c 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_28_spi_pin: pinmux_P9_28_spi_pin { + pinctrl-single,pins = <0x19c 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { + pinctrl-single,pins = <0x19c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_28_pruout_pin: pinmux_P9_28_pruout_pin { + pinctrl-single,pins = <0x19c 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_28_pruin_pin: pinmux_P9_28_pruin_pin { + pinctrl-single,pins = <0x19c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_28_audio_pin: pinmux_P9_28_audio_pin { + pinctrl-single,pins = <0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)>; }; /* mcasp0_ahclkr.mcasp0_axr2 */ + + /* U16 BLUE_GP0_PIN_3 gpio 1_25 */ + U16_default_pin: pinmux_U16_default_pin { + pinctrl-single,pins = < 0x064 ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + U16_gpio_pin: pinmux_U16_gpio_pin { + pinctrl-single,pins = < 0x064 ( PIN_OUTPUT | MUX_MODE7 ) >; }; + U16_gpio_pu_pin: pinmux_U16_gpio_pu_pin { + pinctrl-single,pins = < 0x064 ( PIN_INPUT_PULLUP | MUX_MODE7 ) >; }; + U16_gpio_pd_pin: pinmux_U16_gpio_pd_pin { + pinctrl-single,pins = < 0x064 ( PIN_INPUT_PULLDOWN | MUX_MODE7 ) >; }; + + }; + user_leds_s0: user_leds_s0 { pinctrl-single,pins = < AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ @@ -141,7 +311,6 @@ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */ - >; }; @@ -184,11 +353,11 @@ }; /* DSM2 */ - uart4_pins: pinmux_uart4_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ - >; - }; + //uart4_pins: pinmux_uart4_pins { + // pinctrl-single,pins = < + // AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ + // >; + //}; /* UT5 */ uart5_pins: pinmux_uart5_pins { @@ -261,6 +430,51 @@ AM33XX_IOPAD(0x940, PIN_OUTPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ >; }; + + ehrpwm1_pins: pinmux_ehrpwm1_pins { + pinctrl-single,pins = < + 0x020 0x24 /* P8_19_pwm_pin */ + 0x024 0x24 /* P8_13_pwm_pin */ + >; + }; + + ehrpwm2_pins: pinmux_ehrpwm2_pins { + pinctrl-single,pins = < + 0x048 0x26 /* P9_14_pwm_pin */ + 0x04c 0x26 /* P9_16_pwm_pin */ + >; + }; + + eqep0_pins: pinmux_eqep0_pins { + pinctrl-single,pins = < + 0x1a0 0x21 /* P9_92_qep_pin */ + 0x1a4 0x21 /* P9_27_qep_pin */ + >; + }; + + eqep1_pins: pinmux_eqep1_pins { + pinctrl-single,pins = < + 0x0d4 0x22 /* P8_33_qep_pin */ + 0x0d0 0x22 /* P8_35_qep_pin */ + >; + }; + + eqep2_pins: pinmux_eqep2_pins { + pinctrl-single,pins = < + 0x030 0x24 /* P8_12_qep_pin */ + 0x034 0x24 /* P8_11_qep_pin */ + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + 0x190 0x23 /* spi1_sclk */ + 0x194 0x23 /* spi1_d0 */ + 0x198 0x23 /* spi1_d1 */ + 0x144 ( PIN_OUTPUT | MUX_MODE2 ) /* spi1_cs0 */ + 0x164 ( PIN_OUTPUT | MUX_MODE2 ) /* spi1_cs1 */ + >; + }; }; &uart0 { @@ -284,12 +498,12 @@ status = "okay"; }; -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins>; - - status = "okay"; -}; +//&uart4 { +// pinctrl-names = "default"; +// pinctrl-0 = <&uart4_pins>; +// +// status = "okay"; +//}; &uart5 { pinctrl-names = "default"; @@ -387,6 +601,8 @@ interrupts = <7>; /* NMI */ interrupt-parent = <&intc>; + ti,pmic-shutdown-controller; + charger { interrupts = <0>, <1>; interrupt-names = "USB", "AC"; @@ -487,22 +703,23 @@ }; }; -&tscadc { - status = "okay"; - adc { - ti,adc-channels = <0 1 2 3 4 5 6 7>; - }; -}; +//&tscadc { +// status = "okay"; +// adc { +// ti,adc-channels = <0 1 2 3 4 5 6 7>; +// }; +//}; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins &bt_pins>; + //pinctrl-0 = <&uart3_pins &bt_pins>; + pinctrl-0 = <&uart3_pins>; status = "okay"; - bluetooth { - compatible = "ti,wl1835-st"; - enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; - }; +// bluetooth { +// compatible = "ti,wl1835-st"; +// enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; +// }; }; &aes { @@ -515,8 +732,10 @@ &rtc { system-power-controller; - clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; - clock-names = "ext-clk", "int-clk"; +}; + +&wkup_m3_ipc { + ti,scale-data-fw = "am335x-bone-scale-data.bin"; }; &dcan1 { @@ -533,3 +752,217 @@ line-name = "LS_BUF_EN"; }; }; + +&ocp { + /* activate the static pinmux helper list of pin modes above */ + test_helper: helper { + compatible = "bone-pinmux-helper"; + pinctrl-names = "default"; + pinctrl-0 = <&mux_helper_pins>; + + status = "okay"; + }; + + /* Encoder 4 (U13) */ + P8_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "pruin_pu", "gpio", "gpio_pu", "gpio_pd", "pruin", "qep", "pruecapin_pu"; + pinctrl-0 = <&P8_15_pruin_pu_pin>; + pinctrl-1 = <&P8_15_pruin_pu_pin>; + pinctrl-2 = <&P8_15_gpio_pin>; + pinctrl-3 = <&P8_15_gpio_pu_pin>; + pinctrl-4 = <&P8_15_gpio_pd_pin>; + pinctrl-5 = <&P8_15_pruin_pin>; + pinctrl-6 = <&P8_15_qep_pin>; + pinctrl-7 = <&P8_15_pruecapin_pu_pin>; + }; + + /* UART4 RX DSM */ + P9_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "uart", "gpio", "gpio_pu", "gpio_pd"; + pinctrl-0 = <&P9_11_uart_pin>; + pinctrl-1 = <&P9_11_uart_pin>; + pinctrl-2 = <&P9_11_gpio_pin>; + pinctrl-3 = <&P9_11_gpio_pu_pin>; + pinctrl-4 = <&P9_11_gpio_pd_pin>; + }; + + /* U16 BLUE_GP0_PIN_3 gpio 1_25*/ + U16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd"; + pinctrl-0 = <&U16_default_pin>; + pinctrl-1 = <&U16_gpio_pin>; + pinctrl-2 = <&U16_gpio_pu_pin>; + pinctrl-3 = <&U16_gpio_pd_pin>; + }; + + + /* BLUE_GP0_PIN_3 gpio1_17*/ + P9_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_23_default_pin>; + pinctrl-1 = <&P9_23_gpio_pin>; + pinctrl-2 = <&P9_23_gpio_pu_pin>; + pinctrl-3 = <&P9_23_gpio_pd_pin>; + pinctrl-4 = <&P9_23_pwm_pin>; + }; + + /* BLUE_GP0_PIN_5 gpio3_20 */ + D13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd"; + pinctrl-0 = <&D13_default_pin>; + pinctrl-1 = <&D13_gpio_pin>; + pinctrl-2 = <&D13_gpio_pu_pin>; + pinctrl-3 = <&D13_gpio_pd_pin>; + }; + + /* BLUE_GP0_PIN_6 gpio3_17 */ + P9_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pwm2", "pruout", "pruin"; + pinctrl-0 = <&P9_28_default_pin>; + pinctrl-1 = <&P9_28_gpio_pin>; + pinctrl-2 = <&P9_28_gpio_pu_pin>; + pinctrl-3 = <&P9_28_gpio_pd_pin>; + pinctrl-4 = <&P9_28_pwm_pin>; + pinctrl-5 = <&P9_28_spi_pin>; + pinctrl-6 = <&P9_28_pwm2_pin>; + pinctrl-7 = <&P9_28_pruout_pin>; + pinctrl-8 = <&P9_28_pruin_pin>; + }; + + /* BLUE_GP1_PIN_3 gpio3_2 */ + J15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd"; + pinctrl-0 = <&J15_default_pin>; + pinctrl-1 = <&J15_gpio_pin>; + pinctrl-2 = <&J15_gpio_pu_pin>; + pinctrl-3 = <&J15_gpio_pd_pin>; + }; + + /* BLUE_GP1_PIN_4 gpio3_1 */ + H17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd"; + pinctrl-0 = <&H17_default_pin>; + pinctrl-1 = <&H17_gpio_pin>; + pinctrl-2 = <&H17_gpio_pu_pin>; + pinctrl-3 = <&H17_gpio_pd_pin>; + }; +}; + +/******************************************************************************* +* PWMSS +*******************************************************************************/ +&epwmss0 { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm0 { + status = "okay"; +}; + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&ehrpwm1_pins>; + status = "okay"; +}; + +&ehrpwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&ehrpwm2_pins>; + status = "okay"; +}; + +/******************************************************************************* +* EQEP +*******************************************************************************/ +&eqep0 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep0_pins>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ + status = "okay"; +}; + +&eqep1 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep1_pins>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ + status = "okay"; +}; + +&eqep2 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep2_pins>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ + status = "okay"; +}; + +/******************************************************************************* + SPI +*******************************************************************************/ +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "spidev"; + symlink = "spi/1.0"; + reg = <0>; + spi-max-frequency = <24000000>; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "spidev"; + symlink = "spi/1.1"; + reg = <1>; + spi-max-frequency = <24000000>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-wireless-common-univ.dtsi b/arch/arm/boot/dts/am335x-bonegreen-wireless-common-univ.dtsi new file mode 100644 index 0000000..455a8fa --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless-common-univ.dtsi @@ -0,0 +1,2797 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + + /* P8_02 GND */ + + + /* P8_03 (ZCZ ball R9) emmc */ + P8_03_default_pin: pinmux_P8_03_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_pin: pinmux_P8_03_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_pu_pin: pinmux_P8_03_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_pd_pin: pinmux_P8_03_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + P8_03_gpio_input_pin: pinmux_P8_03_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0818, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad6.gpio1_6 */ + + /* P8_04 (ZCZ ball T9) emmc */ + P8_04_default_pin: pinmux_P8_04_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_pin: pinmux_P8_04_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_pu_pin: pinmux_P8_04_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_pd_pin: pinmux_P8_04_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + P8_04_gpio_input_pin: pinmux_P8_04_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x081c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad7.gpio1_7 */ + + /* P8_05 (ZCZ ball R8) emmc */ + P8_05_default_pin: pinmux_P8_05_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_pin: pinmux_P8_05_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_pu_pin: pinmux_P8_05_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_pd_pin: pinmux_P8_05_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + P8_05_gpio_input_pin: pinmux_P8_05_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0808, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad2.gpio1_2 */ + + /* P8_06 (ZCZ ball T8) emmc */ + P8_06_default_pin: pinmux_P8_06_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_pin: pinmux_P8_06_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_pu_pin: pinmux_P8_06_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_pd_pin: pinmux_P8_06_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + P8_06_gpio_input_pin: pinmux_P8_06_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x080c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad3.gpio1_3 */ + + /* P8_07 (ZCZ ball R7) gpio2_2 */ + P8_07_default_pin: pinmux_P8_07_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_pin: pinmux_P8_07_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_pu_pin: pinmux_P8_07_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_pd_pin: pinmux_P8_07_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_gpio_input_pin: pinmux_P8_07_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_advn_ale.gpio2_2 */ + P8_07_timer_pin: pinmux_P8_07_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_advn_ale.timer4 */ + + /* P8_08 (ZCZ ball T7) gpio2_3 */ + P8_08_default_pin: pinmux_P8_08_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_pin: pinmux_P8_08_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_pu_pin: pinmux_P8_08_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_pd_pin: pinmux_P8_08_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_gpio_input_pin: pinmux_P8_08_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_oen_ren.gpio2_3 */ + P8_08_timer_pin: pinmux_P8_08_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_oen_ren.timer7 */ + + /* P8_09 (ZCZ ball T6) gpio2_5 */ + P8_09_default_pin: pinmux_P8_09_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_pin: pinmux_P8_09_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_pu_pin: pinmux_P8_09_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_pd_pin: pinmux_P8_09_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_gpio_input_pin: pinmux_P8_09_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_be0n_cle.gpio2_5 */ + P8_09_timer_pin: pinmux_P8_09_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_be0n_cle.timer5 */ + + /* P8_10 (ZCZ ball U6) gpio2_4 */ + P8_10_default_pin: pinmux_P8_10_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_pin: pinmux_P8_10_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_pu_pin: pinmux_P8_10_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_pd_pin: pinmux_P8_10_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_gpio_input_pin: pinmux_P8_10_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wen.gpio2_4 */ + P8_10_timer_pin: pinmux_P8_10_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* gpmc_wen.timer6 */ + + /* P8_11 (ZCZ ball R12) gpio1_13 */ + P8_11_default_pin: pinmux_P8_11_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_pin: pinmux_P8_11_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_pu_pin: pinmux_P8_11_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_pd_pin: pinmux_P8_11_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_gpio_input_pin: pinmux_P8_11_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P8_11_qep_pin: pinmux_P8_11_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad13.eqep2b_in */ + P8_11_pruout_pin: pinmux_P8_11_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_ad13.pru0_out15 */ + + /* P8_12 (ZCZ ball T12) gpio1_12 */ + P8_12_default_pin: pinmux_P8_12_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_pin: pinmux_P8_12_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_pu_pin: pinmux_P8_12_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_pd_pin: pinmux_P8_12_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_gpio_input_pin: pinmux_P8_12_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P8_12_qep_pin: pinmux_P8_12_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad12.eqep2a_in */ + P8_12_pruout_pin: pinmux_P8_12_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_ad12.pru0_out14 */ + + /* P8_13 (ZCZ ball T10) gpio0_23 */ + P8_13_default_pin: pinmux_P8_13_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_pin: pinmux_P8_13_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_pu_pin: pinmux_P8_13_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_pd_pin: pinmux_P8_13_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_gpio_input_pin: pinmux_P8_13_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P8_13_pwm_pin: pinmux_P8_13_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad9.ehrpwm2b */ + + /* P8_14 (ZCZ ball T11) wl1835: wl_en */ + + /* P8_15 (ZCZ ball U13) gpio1_15 */ + P8_15_default_pin: pinmux_P8_15_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_pin: pinmux_P8_15_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_gpio_input_pin: pinmux_P8_15_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P8_15_qep_pin: pinmux_P8_15_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad15.eqep2_strobe */ + P8_15_pru_ecap_pin: pinmux_P8_15_pru_ecap_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_ad15.pr1_ecap0_ecap_capin_apwm_o */ + P8_15_pruin_pin: pinmux_P8_15_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_ad15.pru0_in15 */ + + /* P8_16 (ZCZ ball V13) gpio1_14 */ + P8_16_default_pin: pinmux_P8_16_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_pin: pinmux_P8_16_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_pu_pin: pinmux_P8_16_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_pd_pin: pinmux_P8_16_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_gpio_input_pin: pinmux_P8_16_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P8_16_qep_pin: pinmux_P8_16_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad14.eqep2_index */ + P8_16_pruin_pin: pinmux_P8_16_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_ad14.pru0_in14 */ + + /* P8_17 (ZCZ ball U12) wl1835: wl_irq */ + + /* P8_18 (ZCZ ball V12) gpio2_1 */ + P8_18_default_pin: pinmux_P8_18_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_pin: pinmux_P8_18_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_pu_pin: pinmux_P8_18_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_pd_pin: pinmux_P8_18_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P8_18_gpio_input_pin: pinmux_P8_18_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + + /* P8_19 (ZCZ ball U10) gpio0_22 */ + P8_19_default_pin: pinmux_P8_19_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_pin: pinmux_P8_19_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_pu_pin: pinmux_P8_19_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_pd_pin: pinmux_P8_19_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_gpio_input_pin: pinmux_P8_19_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad8.gpio0_22 */ + P8_19_pwm_pin: pinmux_P8_19_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad8.ehrpwm2a */ + + /* P8_20 (ZCZ ball V9) emmc */ + P8_20_default_pin: pinmux_P8_20_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_pin: pinmux_P8_20_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_pu_pin: pinmux_P8_20_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_pd_pin: pinmux_P8_20_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_gpio_input_pin: pinmux_P8_20_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_csn2.gpio1_31 */ + P8_20_pruout_pin: pinmux_P8_20_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_csn2.pru1_out13 */ + P8_20_pruin_pin: pinmux_P8_20_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0884, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_csn2.pru1_in13 */ + + /* P8_21 (ZCZ ball U9) emmc */ + P8_21_default_pin: pinmux_P8_21_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_pin: pinmux_P8_21_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_pu_pin: pinmux_P8_21_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_pd_pin: pinmux_P8_21_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_gpio_input_pin: pinmux_P8_21_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_csn1.gpio1_30 */ + P8_21_pruout_pin: pinmux_P8_21_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_csn1.pru1_out12 */ + P8_21_pruin_pin: pinmux_P8_21_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0880, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_csn1.pru1_in12 */ + + /* P8_22 (ZCZ ball V8) emmc */ + P8_22_default_pin: pinmux_P8_22_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_pin: pinmux_P8_22_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_pu_pin: pinmux_P8_22_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_pd_pin: pinmux_P8_22_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + P8_22_gpio_input_pin: pinmux_P8_22_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0814, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad5.gpio1_5 */ + + /* P8_23 (ZCZ ball U8) emmc */ + P8_23_default_pin: pinmux_P8_23_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_pin: pinmux_P8_23_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_pu_pin: pinmux_P8_23_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_pd_pin: pinmux_P8_23_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + P8_23_gpio_input_pin: pinmux_P8_23_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0810, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad4.gpio1_4 */ + + /* P8_24 (ZCZ ball V7) emmc */ + P8_24_default_pin: pinmux_P8_24_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_pin: pinmux_P8_24_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_pu_pin: pinmux_P8_24_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_pd_pin: pinmux_P8_24_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + P8_24_gpio_input_pin: pinmux_P8_24_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0804, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad1.gpio1_1 */ + + /* P8_25 (ZCZ ball U7) emmc */ + P8_25_default_pin: pinmux_P8_25_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_pin: pinmux_P8_25_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_pu_pin: pinmux_P8_25_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_pd_pin: pinmux_P8_25_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + P8_25_gpio_input_pin: pinmux_P8_25_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0800, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad0.gpio1_0 */ + + /* P8_26 (ZCZ ball V6) gpio-hog wl1835 */ + + /* P8_27 (ZCZ ball U5) hdmi */ + P8_27_default_pin: pinmux_P8_27_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_pin: pinmux_P8_27_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_pu_pin: pinmux_P8_27_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_pd_pin: pinmux_P8_27_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_gpio_input_pin: pinmux_P8_27_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P8_27_pruout_pin: pinmux_P8_27_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_vsync.pru1_out8 */ + P8_27_pruin_pin: pinmux_P8_27_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_vsync.pru1_in8 */ + + /* P8_28 (ZCZ ball V5) hdmi */ + P8_28_default_pin: pinmux_P8_28_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_pin: pinmux_P8_28_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_pu_pin: pinmux_P8_28_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_pd_pin: pinmux_P8_28_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_gpio_input_pin: pinmux_P8_28_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P8_28_pruout_pin: pinmux_P8_28_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_pclk.pru1_out10 */ + P8_28_pruin_pin: pinmux_P8_28_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_pclk.pru1_in10 */ + + /* P8_29 (ZCZ ball R5) hdmi */ + P8_29_default_pin: pinmux_P8_29_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_pin: pinmux_P8_29_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_pu_pin: pinmux_P8_29_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_pd_pin: pinmux_P8_29_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_gpio_input_pin: pinmux_P8_29_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P8_29_pruout_pin: pinmux_P8_29_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_hsync.pru1_out9 */ + P8_29_pruin_pin: pinmux_P8_29_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_hsync.pru1_in9 */ + + /* P8_30 (ZCZ ball R6) hdmi */ + P8_30_default_pin: pinmux_P8_30_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_pin: pinmux_P8_30_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_pu_pin: pinmux_P8_30_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_pd_pin: pinmux_P8_30_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_gpio_input_pin: pinmux_P8_30_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P8_30_pruout_pin: pinmux_P8_30_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_ac_bias_en.pru1_out11 */ + P8_30_pruin_pin: pinmux_P8_30_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE6) >; }; /* lcd_ac_bias_en.pru1_in11 */ + + /* P8_31 (ZCZ ball V4) hdmi */ + P8_31_default_pin: pinmux_P8_31_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_pin: pinmux_P8_31_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_pu_pin: pinmux_P8_31_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_pd_pin: pinmux_P8_31_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_gpio_input_pin: pinmux_P8_31_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data14.gpio0_10 */ + P8_31_qep_pin: pinmux_P8_31_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data14.eqep1_index */ + P8_31_uart_pin: pinmux_P8_31_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* lcd_data14.uart5_rxd */ + + /* P8_32 (ZCZ ball T5) hdmi */ + P8_32_default_pin: pinmux_P8_32_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_pin: pinmux_P8_32_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_pu_pin: pinmux_P8_32_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_pd_pin: pinmux_P8_32_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_gpio_input_pin: pinmux_P8_32_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data15.gpio0_11 */ + P8_32_qep_pin: pinmux_P8_32_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data15.eqep1_strobe */ + + /* P8_33 (ZCZ ball V3) hdmi */ + P8_33_default_pin: pinmux_P8_33_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_pin: pinmux_P8_33_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_pu_pin: pinmux_P8_33_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_pd_pin: pinmux_P8_33_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_gpio_input_pin: pinmux_P8_33_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data13.gpio0_9 */ + P8_33_qep_pin: pinmux_P8_33_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data13.eqep1b_in */ + + /* P8_34 (ZCZ ball U4) hdmi */ + P8_34_default_pin: pinmux_P8_34_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_pin: pinmux_P8_34_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_pu_pin: pinmux_P8_34_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_pd_pin: pinmux_P8_34_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_gpio_input_pin: pinmux_P8_34_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data11.gpio2_17 */ + P8_34_pwm_pin: pinmux_P8_34_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data11.ehrpwm1b */ + + /* P8_35 (ZCZ ball V2) hdmi */ + P8_35_default_pin: pinmux_P8_35_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_pin: pinmux_P8_35_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_pu_pin: pinmux_P8_35_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_pd_pin: pinmux_P8_35_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_gpio_input_pin: pinmux_P8_35_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data12.gpio0_8 */ + P8_35_qep_pin: pinmux_P8_35_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* lcd_data12.eqep1a_in */ + + /* P8_36 (ZCZ ball U3) hdmi */ + P8_36_default_pin: pinmux_P8_36_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_pin: pinmux_P8_36_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_pu_pin: pinmux_P8_36_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_pd_pin: pinmux_P8_36_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_gpio_input_pin: pinmux_P8_36_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data10.gpio2_16 */ + P8_36_pwm_pin: pinmux_P8_36_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data10.ehrpwm1a */ + + /* P8_37 (ZCZ ball U1) hdmi */ + P8_37_default_pin: pinmux_P8_37_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_pin: pinmux_P8_37_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_pu_pin: pinmux_P8_37_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_pd_pin: pinmux_P8_37_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_gpio_input_pin: pinmux_P8_37_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data8.gpio2_14 */ + P8_37_pwm_pin: pinmux_P8_37_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data8.ehrpwm1_tripzone_input */ + P8_37_uart_pin: pinmux_P8_37_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* lcd_data8.uart5_txd */ + + /* P8_38 (ZCZ ball U2) hdmi */ + P8_38_default_pin: pinmux_P8_38_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_pin: pinmux_P8_38_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_pu_pin: pinmux_P8_38_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_pd_pin: pinmux_P8_38_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_gpio_input_pin: pinmux_P8_38_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data9.gpio2_15 */ + P8_38_pwm_pin: pinmux_P8_38_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; }; /* lcd_data9.ehrpwm0_synco */ + P8_38_uart_pin: pinmux_P8_38_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* lcd_data9.uart5_rxd */ + + /* P8_39 (ZCZ ball T3) hdmi */ + P8_39_default_pin: pinmux_P8_39_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_pin: pinmux_P8_39_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_pu_pin: pinmux_P8_39_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_pd_pin: pinmux_P8_39_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_gpio_input_pin: pinmux_P8_39_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data6.gpio2_12 */ + P8_39_qep_pin: pinmux_P8_39_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data6.eqep2_index */ + P8_39_pruout_pin: pinmux_P8_39_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data6.pru1_out6 */ + P8_39_pruin_pin: pinmux_P8_39_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data6.pru1_in6 */ + + /* P8_40 (ZCZ ball T4) hdmi */ + P8_40_default_pin: pinmux_P8_40_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_pin: pinmux_P8_40_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_pu_pin: pinmux_P8_40_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_pd_pin: pinmux_P8_40_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_gpio_input_pin: pinmux_P8_40_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data7.gpio2_13 */ + P8_40_qep_pin: pinmux_P8_40_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data7.eqep2_strobe */ + P8_40_pruout_pin: pinmux_P8_40_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data7.pru1_out7 */ + P8_40_pruin_pin: pinmux_P8_40_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08bc, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data7.pru1_in7 */ + + /* P8_41 (ZCZ ball T1) hdmi */ + P8_41_default_pin: pinmux_P8_41_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_pin: pinmux_P8_41_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_pu_pin: pinmux_P8_41_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_pd_pin: pinmux_P8_41_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_gpio_input_pin: pinmux_P8_41_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data4.gpio2_10 */ + P8_41_qep_pin: pinmux_P8_41_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data4.eqep2a_in */ + P8_41_pruout_pin: pinmux_P8_41_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data4.pru1_out4 */ + P8_41_pruin_pin: pinmux_P8_41_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data4.pru1_in4 */ + + /* P8_42 (ZCZ ball T2) hdmi */ + P8_42_default_pin: pinmux_P8_42_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_pin: pinmux_P8_42_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_pu_pin: pinmux_P8_42_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_pd_pin: pinmux_P8_42_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_gpio_input_pin: pinmux_P8_42_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data5.gpio2_11 */ + P8_42_qep_pin: pinmux_P8_42_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* lcd_data5.eqep2b_in */ + P8_42_pruout_pin: pinmux_P8_42_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data5.pru1_out5 */ + P8_42_pruin_pin: pinmux_P8_42_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08b4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data5.pru1_in5 */ + + /* P8_43 (ZCZ ball R3) hdmi */ + P8_43_default_pin: pinmux_P8_43_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_pin: pinmux_P8_43_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_pu_pin: pinmux_P8_43_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_pd_pin: pinmux_P8_43_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_gpio_input_pin: pinmux_P8_43_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data2.gpio2_8 */ + P8_43_pwm_pin: pinmux_P8_43_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data2.ehrpwm2_tripzone_input */ + P8_43_pruout_pin: pinmux_P8_43_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data2.pru1_out2 */ + P8_43_pruin_pin: pinmux_P8_43_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data2.pru1_in2 */ + + /* P8_44 (ZCZ ball R4) hdmi */ + P8_44_default_pin: pinmux_P8_44_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_pin: pinmux_P8_44_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_pu_pin: pinmux_P8_44_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_pd_pin: pinmux_P8_44_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_gpio_input_pin: pinmux_P8_44_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data3.gpio2_9 */ + P8_44_pwm_pin: pinmux_P8_44_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data3.ehrpwm0_synco */ + P8_44_pruout_pin: pinmux_P8_44_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data3.pru1_out3 */ + P8_44_pruin_pin: pinmux_P8_44_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ac, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data3.pru1_in3 */ + + /* P8_45 (ZCZ ball R1) hdmi */ + P8_45_default_pin: pinmux_P8_45_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_pin: pinmux_P8_45_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_pu_pin: pinmux_P8_45_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_pd_pin: pinmux_P8_45_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_gpio_input_pin: pinmux_P8_45_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data0.gpio2_6 */ + P8_45_pwm_pin: pinmux_P8_45_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data0.ehrpwm2a */ + P8_45_pruout_pin: pinmux_P8_45_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data0.pru1_out0 */ + P8_45_pruin_pin: pinmux_P8_45_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data0.pru1_in0 */ + + /* P8_46 (ZCZ ball R2) hdmi */ + P8_46_default_pin: pinmux_P8_46_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_pin: pinmux_P8_46_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_pu_pin: pinmux_P8_46_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_pd_pin: pinmux_P8_46_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_gpio_input_pin: pinmux_P8_46_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_data1.gpio2_7 */ + P8_46_pwm_pin: pinmux_P8_46_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* lcd_data1.ehrpwm2b */ + P8_46_pruout_pin: pinmux_P8_46_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_data1.pru1_out1 */ + P8_46_pruin_pin: pinmux_P8_46_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08a4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_data1.pru1_in1 */ + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + + /* P9_02 GND */ + + /* P9_03 3V3 */ + + /* P9_04 3V3 */ + + /* P9_05 VDD_5V */ + + /* P9_06 VDD_5V */ + + /* P9_07 SYS_5V */ + + /* P9_08 SYS_5V */ + + /* P9_09 PWR_BUT */ + + /* P9_10 RSTn */ + + /* P9_11 (ZCZ ball T17) gpio0_30 */ + P9_11_default_pin: pinmux_P9_11_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_pin: pinmux_P9_11_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_gpio_input_pin: pinmux_P9_11_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P9_11_uart_pin: pinmux_P9_11_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wait0.uart4_rxd */ + + /* P9_12 (ZCZ ball U18) gpio1_28 */ + P9_12_default_pin: pinmux_P9_12_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_pin: pinmux_P9_12_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_pu_pin: pinmux_P9_12_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_pd_pin: pinmux_P9_12_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P9_12_gpio_input_pin: pinmux_P9_12_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + + /* P9_13 (ZCZ ball U17) gpio0_31 */ + P9_13_default_pin: pinmux_P9_13_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_pin: pinmux_P9_13_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_pu_pin: pinmux_P9_13_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_pd_pin: pinmux_P9_13_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_gpio_input_pin: pinmux_P9_13_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P9_13_uart_pin: pinmux_P9_13_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wpn.uart4_txd */ + + /* P9_14 (ZCZ ball U14) gpio1_18 */ + P9_14_default_pin: pinmux_P9_14_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_pin: pinmux_P9_14_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_pu_pin: pinmux_P9_14_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_pd_pin: pinmux_P9_14_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_gpio_input_pin: pinmux_P9_14_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P9_14_pwm_pin: pinmux_P9_14_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a2.ehrpwm1a */ + + /* P9_15 (ZCZ ball R13) gpio1_16 */ + P9_15_default_pin: pinmux_P9_15_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_pin: pinmux_P9_15_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_pu_pin: pinmux_P9_15_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_pd_pin: pinmux_P9_15_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_gpio_input_pin: pinmux_P9_15_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a0.gpio1_16 */ + P9_15_pwm_pin: pinmux_P9_15_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a0.ehrpwm1_tripzone_input */ + + /* P9_16 (ZCZ ball T14) gpio1_19 */ + P9_16_default_pin: pinmux_P9_16_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_pin: pinmux_P9_16_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_pu_pin: pinmux_P9_16_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_pd_pin: pinmux_P9_16_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_gpio_input_pin: pinmux_P9_16_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a3.gpio1_19 */ + P9_16_pwm_pin: pinmux_P9_16_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a3.ehrpwm1b */ + + /* P9_17 (ZCZ ball A16) gpio0_5 */ + P9_17_default_pin: pinmux_P9_17_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_pin: pinmux_P9_17_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_pu_pin: pinmux_P9_17_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_pd_pin: pinmux_P9_17_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_gpio_input_pin: pinmux_P9_17_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_INPUT | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P9_17_spi_cs_pin: pinmux_P9_17_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_cs0.spi0_cs0 */ + P9_17_i2c_pin: pinmux_P9_17_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_cs0.i2c1_scl */ + P9_17_pwm_pin: pinmux_P9_17_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_cs0.ehrpwm0_synci */ + P9_17_pru_uart_pin: pinmux_P9_17_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_cs0.pr1_uart0_txd */ + + /* P9_18 (ZCZ ball B16) gpio0_4 */ + P9_18_default_pin: pinmux_P9_18_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_pin: pinmux_P9_18_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_pu_pin: pinmux_P9_18_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_pd_pin: pinmux_P9_18_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_gpio_input_pin: pinmux_P9_18_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_INPUT | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P9_18_spi_pin: pinmux_P9_18_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d1.spi0_d1 */ + P9_18_i2c_pin: pinmux_P9_18_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_d1.i2c1_sda */ + P9_18_pwm_pin: pinmux_P9_18_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_d1.ehrpwm0_tripzone_input */ + P9_18_pru_uart_pin: pinmux_P9_18_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_d1.pr1_uart0_rxd */ + + /* P9_19 (ZCZ ball D17) i2c2_scl */ + P9_19_default_pin: pinmux_P9_19_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */ + P9_19_gpio_pin: pinmux_P9_19_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_gpio_pu_pin: pinmux_P9_19_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_gpio_pd_pin: pinmux_P9_19_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_gpio_input_pin: pinmux_P9_19_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_INPUT | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P9_19_timer_pin: pinmux_P9_19_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart1_rtsn.timer5 */ + P9_19_can_pin: pinmux_P9_19_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart1_rtsn.dcan0_rx */ + P9_19_i2c_pin: pinmux_P9_19_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */ + P9_19_spi_cs_pin: pinmux_P9_19_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_rtsn.spi1_cs1 */ + P9_19_pru_uart_pin: pinmux_P9_19_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_rtsn.pr1_uart0_rts_n */ + + /* P9_20 (ZCZ ball D18) i2c2_sda */ + P9_20_default_pin: pinmux_P9_20_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */ + P9_20_gpio_pin: pinmux_P9_20_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_gpio_pu_pin: pinmux_P9_20_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_gpio_pd_pin: pinmux_P9_20_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_gpio_input_pin: pinmux_P9_20_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_INPUT | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P9_20_timer_pin: pinmux_P9_20_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart1_ctsn.timer6 */ + P9_20_can_pin: pinmux_P9_20_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart1_ctsn.dcan0_tx */ + P9_20_i2c_pin: pinmux_P9_20_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */ + P9_20_spi_cs_pin: pinmux_P9_20_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_ctsn.spi1_cs0 */ + P9_20_pru_uart_pin: pinmux_P9_20_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_ctsn.pr1_uart0_cts_n */ + + /* P9_21 (ZCZ ball B17) gpio0_3 */ + P9_21_default_pin: pinmux_P9_21_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_pin: pinmux_P9_21_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_pu_pin: pinmux_P9_21_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_pd_pin: pinmux_P9_21_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_gpio_input_pin: pinmux_P9_21_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_INPUT | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P9_21_spi_pin: pinmux_P9_21_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d0.spi0_d0 */ + P9_21_uart_pin: pinmux_P9_21_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* spi0_d0.uart2_txd */ + P9_21_i2c_pin: pinmux_P9_21_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_d0.i2c2_scl */ + P9_21_pwm_pin: pinmux_P9_21_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_d0.ehrpwm0b */ + P9_21_pru_uart_pin: pinmux_P9_21_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_d0.pr1_uart0_rts_n */ + + /* P9_22 (ZCZ ball A17) gpio0_2 */ + P9_22_default_pin: pinmux_P9_22_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_pin: pinmux_P9_22_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_pu_pin: pinmux_P9_22_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_pd_pin: pinmux_P9_22_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_gpio_input_pin: pinmux_P9_22_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_INPUT | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P9_22_spi_sclk_pin: pinmux_P9_22_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_sclk.spi0_sclk */ + P9_22_uart_pin: pinmux_P9_22_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* spi0_sclk.uart2_rxd */ + P9_22_i2c_pin: pinmux_P9_22_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_sclk.i2c2_sda */ + P9_22_pwm_pin: pinmux_P9_22_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_sclk.ehrpwm0a */ + P9_22_pru_uart_pin: pinmux_P9_22_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_sclk.pr1_uart0_cts_n */ + + /* P9_23 (ZCZ ball V14) gpio1_17 */ + P9_23_default_pin: pinmux_P9_23_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_pin: pinmux_P9_23_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_gpio_input_pin: pinmux_P9_23_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a1.gpio1_17 */ + P9_23_pwm_pin: pinmux_P9_23_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a1.ehrpwm0_synco */ + + /* P9_24 (ZCZ ball D15) gpio0_15 */ + P9_24_default_pin: pinmux_P9_24_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_pin: pinmux_P9_24_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_pu_pin: pinmux_P9_24_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_pd_pin: pinmux_P9_24_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_gpio_input_pin: pinmux_P9_24_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P9_24_uart_pin: pinmux_P9_24_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart1_txd.uart1_txd */ + P9_24_can_pin: pinmux_P9_24_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart1_txd.dcan1_rx */ + P9_24_i2c_pin: pinmux_P9_24_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_txd.i2c1_scl */ + P9_24_pru_uart_pin: pinmux_P9_24_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_txd.pr1_uart0_txd */ + P9_24_pruin_pin: pinmux_P9_24_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE6) >; }; /* uart1_txd.pru0_in16 */ + + /* P9_25 (ZCZ ball A14) audio */ + P9_25_default_pin: pinmux_P9_25_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_pin: pinmux_P9_25_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_pu_pin: pinmux_P9_25_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_pd_pin: pinmux_P9_25_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_gpio_input_pin: pinmux_P9_25_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P9_25_qep_pin: pinmux_P9_25_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_ahclkx.eqep0_strobe */ + P9_25_pruout_pin: pinmux_P9_25_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_ahclkx.pru0_out7 */ + P9_25_pruin_pin: pinmux_P9_25_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkx.pru0_in7 */ + + /* P9_26 (ZCZ ball D16) gpio0_14 */ + P9_26_default_pin: pinmux_P9_26_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_pin: pinmux_P9_26_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_pu_pin: pinmux_P9_26_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_pd_pin: pinmux_P9_26_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_gpio_input_pin: pinmux_P9_26_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P9_26_uart_pin: pinmux_P9_26_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart1_rxd.uart1_rxd */ + P9_26_can_pin: pinmux_P9_26_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart1_rxd.dcan1_tx */ + P9_26_i2c_pin: pinmux_P9_26_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rxd.i2c1_sda */ + P9_26_pru_uart_pin: pinmux_P9_26_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_rxd.pr1_uart0_rxd */ + P9_26_pruin_pin: pinmux_P9_26_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE6) >; }; /* uart1_rxd.pru1_in16 */ + + /* P9_27 (ZCZ ball C13) gpio3_19 */ + P9_27_default_pin: pinmux_P9_27_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_pin: pinmux_P9_27_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_pu_pin: pinmux_P9_27_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_pd_pin: pinmux_P9_27_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_gpio_input_pin: pinmux_P9_27_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P9_27_qep_pin: pinmux_P9_27_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_fsr.eqep0b_in */ + P9_27_pruout_pin: pinmux_P9_27_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_fsr.pru0_out5 */ + P9_27_pruin_pin: pinmux_P9_27_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsr.pru0_in5 */ + + /* P9_28 (ZCZ ball C12) audio */ + P9_28_default_pin: pinmux_P9_28_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_pin: pinmux_P9_28_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_gpio_input_pin: pinmux_P9_28_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P9_28_pwm_pin: pinmux_P9_28_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_ahclkr.ehrpwm0_synci */ + P9_28_spi_cs_pin: pinmux_P9_28_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_ahclkr.spi1_cs0 */ + P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* mcasp0_ahclkr.ecap2_in_pwm2_out */ + P9_28_pruout_pin: pinmux_P9_28_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_ahclkr.pru0_out3 */ + P9_28_pruin_pin: pinmux_P9_28_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkr.pru0_in3 */ + + /* P9_29 (ZCZ ball B13) audio */ + P9_29_default_pin: pinmux_P9_29_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_pin: pinmux_P9_29_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_pu_pin: pinmux_P9_29_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_pd_pin: pinmux_P9_29_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_gpio_input_pin: pinmux_P9_29_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P9_29_pwm_pin: pinmux_P9_29_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_fsx.ehrpwm0b */ + P9_29_spi_pin: pinmux_P9_29_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_fsx.spi1_d0 */ + P9_29_pruout_pin: pinmux_P9_29_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_fsx.pru0_out1 */ + P9_29_pruin_pin: pinmux_P9_29_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsx.pru0_in1 */ + + /* P9_30 (ZCZ ball D12) gpio-hog wl1835 */ + + /* P9_31 (ZCZ ball A13) audio */ + P9_31_default_pin: pinmux_P9_31_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_pin: pinmux_P9_31_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_pu_pin: pinmux_P9_31_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_pd_pin: pinmux_P9_31_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_gpio_input_pin: pinmux_P9_31_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P9_31_pwm_pin: pinmux_P9_31_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkx.ehrpwm0a */ + P9_31_spi_sclk_pin: pinmux_P9_31_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_aclkx.spi1_sclk */ + P9_31_pruout_pin: pinmux_P9_31_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_aclkx.pru0_out0 */ + P9_31_pruin_pin: pinmux_P9_31_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkx.pru0_in0 */ + + /* P9_32 VADC */ + + /* P9_33 (ZCZ ball C8) AIN4 */ + + /* P9_34 AGND */ + + /* P9_35 (ZCZ ball A8) AIN6 */ + + /* P9_36 (ZCZ ball B8) AIN5 */ + + /* P9_37 (ZCZ ball B7) AIN2 */ + + /* P9_38 (ZCZ ball A7) AIN3 */ + + /* P9_39 (ZCZ ball B6) AIN0 */ + + /* P9_40 (ZCZ ball C7) AIN1 */ + + /* P9_41 (ZCZ ball D14) gpio0_20 */ + P9_41_default_pin: pinmux_P9_41_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_pin: pinmux_P9_41_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_pu_pin: pinmux_P9_41_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_pd_pin: pinmux_P9_41_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_gpio_input_pin: pinmux_P9_41_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P9_41_timer_pin: pinmux_P9_41_timer_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* xdma_event_intr1.timer7 */ + P9_41_pruin_pin: pinmux_P9_41_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE5) >; }; /* xdma_event_intr1.pru0_in16 */ + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) gpio3_20 */ + P9_91_default_pin: pinmux_P9_91_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_pin: pinmux_P9_91_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_pu_pin: pinmux_P9_91_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_pd_pin: pinmux_P9_91_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_gpio_input_pin: pinmux_P9_91_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P9_91_qep_pin: pinmux_P9_91_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_axr1.eqep0_index */ + P9_91_pruout_pin: pinmux_P9_91_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_axr1.pru0_out6 */ + P9_91_pruin_pin: pinmux_P9_91_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr1.pru0_in6 */ + + /* P9_42 (ZCZ ball C18) gpio0_7 */ + P9_42_default_pin: pinmux_P9_42_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_pin: pinmux_P9_42_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_pu_pin: pinmux_P9_42_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_pd_pin: pinmux_P9_42_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_gpio_input_pin: pinmux_P9_42_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_INPUT | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P9_42_pwm_pin: pinmux_P9_42_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE0) >; }; /* eCAP0_in_PWM0_out.ecap0_in_pwm0_out */ + P9_42_uart_pin: pinmux_P9_42_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* eCAP0_in_PWM0_out.uart3_txd */ + P9_42_spi_cs_pin: pinmux_P9_42_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* eCAP0_in_PWM0_out.spi1_cs1 */ + P9_42_pru_ecap_pin: pinmux_P9_42_pru_ecap_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* eCAP0_in_PWM0_out.pr1_ecap0_ecap_capin_apwm_o */ + P9_42_spi_sclk_pin: pinmux_P9_42_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* eCAP0_in_PWM0_out.spi1_sclk */ + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) gpio3_18 */ + P9_92_default_pin: pinmux_P9_92_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_pin: pinmux_P9_92_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_pu_pin: pinmux_P9_92_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_pd_pin: pinmux_P9_92_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_gpio_input_pin: pinmux_P9_92_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P9_92_qep_pin: pinmux_P9_92_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkr.eqep0a_in */ + P9_92_pruout_pin: pinmux_P9_92_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_aclkr.pru0_out4 */ + P9_92_pruin_pin: pinmux_P9_92_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkr.pru0_in4 */ + + /* P9_43 GND */ + + /* P9_44 GND */ + + /* P9_45 GND */ + + /* P9_46 GND */ +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + clock-frequency = <100000>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + clock-frequency = <100000>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart5 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&dcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&eqep0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ +}; + +&eqep1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ +}; + +&eqep2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ + swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ + invert_qa = <1>; /* Should we invert the channel A input? */ + invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ + invert_qi = <0>; /* Should we invert the index input? */ + invert_qs = <0>; /* Should we invert the strobe input? */ +}; + +&epwmss0 { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ehrpwm1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ehrpwm2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ecap0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ecap1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ecap2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + symlink = "spi/0.0"; + + reg = <0>; + spi-max-frequency = <16000000>; + spi-cpha; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + symlink = "spi/0.1"; + + reg = <1>; + spi-max-frequency = <16000000>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + symlink = "spi/1.0"; + + reg = <0>; + spi-max-frequency = <16000000>; + spi-cpha; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "spidev"; + symlink = "spi/1.1"; + + reg = <1>; + spi-max-frequency = <16000000>; + }; +}; + +/**********************************************************************/ +/* Pin Multiplex Helpers */ +/* */ +/* These provide userspace runtime pin configuration for the */ +/* BeagleBone cape expansion headers */ +/**********************************************************************/ + +&ocp { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + + /* P8_02 GND */ + + + /* P8_03 (ZCZ ball R9) emmc */ + P8_03_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_03_default_pin>; + pinctrl-1 = <&P8_03_gpio_pin>; + pinctrl-2 = <&P8_03_gpio_pu_pin>; + pinctrl-3 = <&P8_03_gpio_pd_pin>; + pinctrl-4 = <&P8_03_gpio_input_pin>; + }; + + /* P8_04 (ZCZ ball T9) emmc */ + P8_04_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_04_default_pin>; + pinctrl-1 = <&P8_04_gpio_pin>; + pinctrl-2 = <&P8_04_gpio_pu_pin>; + pinctrl-3 = <&P8_04_gpio_pd_pin>; + pinctrl-4 = <&P8_04_gpio_input_pin>; + }; + + /* P8_05 (ZCZ ball R8) emmc */ + P8_05_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_05_default_pin>; + pinctrl-1 = <&P8_05_gpio_pin>; + pinctrl-2 = <&P8_05_gpio_pu_pin>; + pinctrl-3 = <&P8_05_gpio_pd_pin>; + pinctrl-4 = <&P8_05_gpio_input_pin>; + }; + + /* P8_06 (ZCZ ball T8) emmc */ + P8_06_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_06_default_pin>; + pinctrl-1 = <&P8_06_gpio_pin>; + pinctrl-2 = <&P8_06_gpio_pu_pin>; + pinctrl-3 = <&P8_06_gpio_pd_pin>; + pinctrl-4 = <&P8_06_gpio_input_pin>; + }; + + /* P8_07 (ZCZ ball R7) */ + P8_07_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_07_default_pin>; + pinctrl-1 = <&P8_07_gpio_pin>; + pinctrl-2 = <&P8_07_gpio_pu_pin>; + pinctrl-3 = <&P8_07_gpio_pd_pin>; + pinctrl-4 = <&P8_07_gpio_input_pin>; + pinctrl-5 = <&P8_07_timer_pin>; + }; + + /* P8_08 (ZCZ ball T7) */ + P8_08_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_08_default_pin>; + pinctrl-1 = <&P8_08_gpio_pin>; + pinctrl-2 = <&P8_08_gpio_pu_pin>; + pinctrl-3 = <&P8_08_gpio_pd_pin>; + pinctrl-4 = <&P8_08_gpio_input_pin>; + pinctrl-5 = <&P8_08_timer_pin>; + }; + + /* P8_09 (ZCZ ball T6) */ + P8_09_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_09_default_pin>; + pinctrl-1 = <&P8_09_gpio_pin>; + pinctrl-2 = <&P8_09_gpio_pu_pin>; + pinctrl-3 = <&P8_09_gpio_pd_pin>; + pinctrl-4 = <&P8_09_gpio_input_pin>; + pinctrl-5 = <&P8_09_timer_pin>; + }; + + /* P8_10 (ZCZ ball U6) */ + P8_10_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer"; + pinctrl-0 = <&P8_10_default_pin>; + pinctrl-1 = <&P8_10_gpio_pin>; + pinctrl-2 = <&P8_10_gpio_pu_pin>; + pinctrl-3 = <&P8_10_gpio_pd_pin>; + pinctrl-4 = <&P8_10_gpio_input_pin>; + pinctrl-5 = <&P8_10_timer_pin>; + }; + + /* P8_11 (ZCZ ball R12) */ + P8_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout"; + pinctrl-0 = <&P8_11_default_pin>; + pinctrl-1 = <&P8_11_gpio_pin>; + pinctrl-2 = <&P8_11_gpio_pu_pin>; + pinctrl-3 = <&P8_11_gpio_pd_pin>; + pinctrl-4 = <&P8_11_gpio_input_pin>; + pinctrl-5 = <&P8_11_qep_pin>; + pinctrl-6 = <&P8_11_pruout_pin>; + }; + + /* P8_12 (ZCZ ball T12) */ + P8_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout"; + pinctrl-0 = <&P8_12_default_pin>; + pinctrl-1 = <&P8_12_gpio_pin>; + pinctrl-2 = <&P8_12_gpio_pu_pin>; + pinctrl-3 = <&P8_12_gpio_pd_pin>; + pinctrl-4 = <&P8_12_gpio_input_pin>; + pinctrl-5 = <&P8_12_qep_pin>; + pinctrl-6 = <&P8_12_pruout_pin>; + }; + + /* P8_13 (ZCZ ball T10) */ + P8_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_13_default_pin>; + pinctrl-1 = <&P8_13_gpio_pin>; + pinctrl-2 = <&P8_13_gpio_pu_pin>; + pinctrl-3 = <&P8_13_gpio_pd_pin>; + pinctrl-4 = <&P8_13_gpio_input_pin>; + pinctrl-5 = <&P8_13_pwm_pin>; + }; + + /* P8_14 (ZCZ ball T11) wl1835: wl_en */ + + /* P8_15 (ZCZ ball U13) */ + P8_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pru_ecap", "pruin"; + pinctrl-0 = <&P8_15_default_pin>; + pinctrl-1 = <&P8_15_gpio_pin>; + pinctrl-2 = <&P8_15_gpio_pu_pin>; + pinctrl-3 = <&P8_15_gpio_pd_pin>; + pinctrl-4 = <&P8_15_gpio_input_pin>; + pinctrl-5 = <&P8_15_qep_pin>; + pinctrl-6 = <&P8_15_pru_ecap_pin>; + pinctrl-7 = <&P8_15_pruin_pin>; + }; + + /* P8_16 (ZCZ ball V13) */ + P8_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruin"; + pinctrl-0 = <&P8_16_default_pin>; + pinctrl-1 = <&P8_16_gpio_pin>; + pinctrl-2 = <&P8_16_gpio_pu_pin>; + pinctrl-3 = <&P8_16_gpio_pd_pin>; + pinctrl-4 = <&P8_16_gpio_input_pin>; + pinctrl-5 = <&P8_16_qep_pin>; + pinctrl-6 = <&P8_16_pruin_pin>; + }; + + /* P8_17 (ZCZ ball U12) wl1835: wl_irq */ + + /* P8_18 (ZCZ ball V12) */ + P8_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_18_default_pin>; + pinctrl-1 = <&P8_18_gpio_pin>; + pinctrl-2 = <&P8_18_gpio_pu_pin>; + pinctrl-3 = <&P8_18_gpio_pd_pin>; + pinctrl-4 = <&P8_18_gpio_input_pin>; + }; + + /* P8_19 (ZCZ ball U10) */ + P8_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_19_default_pin>; + pinctrl-1 = <&P8_19_gpio_pin>; + pinctrl-2 = <&P8_19_gpio_pu_pin>; + pinctrl-3 = <&P8_19_gpio_pd_pin>; + pinctrl-4 = <&P8_19_gpio_input_pin>; + pinctrl-5 = <&P8_19_pwm_pin>; + }; + + /* P8_20 (ZCZ ball V9) emmc */ + P8_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_20_default_pin>; + pinctrl-1 = <&P8_20_gpio_pin>; + pinctrl-2 = <&P8_20_gpio_pu_pin>; + pinctrl-3 = <&P8_20_gpio_pd_pin>; + pinctrl-4 = <&P8_20_gpio_input_pin>; + pinctrl-5 = <&P8_20_pruout_pin>; + pinctrl-6 = <&P8_20_pruin_pin>; + }; + + /* P8_21 (ZCZ ball U9) emmc */ + P8_21_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_21_default_pin>; + pinctrl-1 = <&P8_21_gpio_pin>; + pinctrl-2 = <&P8_21_gpio_pu_pin>; + pinctrl-3 = <&P8_21_gpio_pd_pin>; + pinctrl-4 = <&P8_21_gpio_input_pin>; + pinctrl-5 = <&P8_21_pruout_pin>; + pinctrl-6 = <&P8_21_pruin_pin>; + }; + + /* P8_22 (ZCZ ball V8) emmc */ + P8_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_22_default_pin>; + pinctrl-1 = <&P8_22_gpio_pin>; + pinctrl-2 = <&P8_22_gpio_pu_pin>; + pinctrl-3 = <&P8_22_gpio_pd_pin>; + pinctrl-4 = <&P8_22_gpio_input_pin>; + }; + + /* P8_23 (ZCZ ball U8) emmc */ + P8_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_23_default_pin>; + pinctrl-1 = <&P8_23_gpio_pin>; + pinctrl-2 = <&P8_23_gpio_pu_pin>; + pinctrl-3 = <&P8_23_gpio_pd_pin>; + pinctrl-4 = <&P8_23_gpio_input_pin>; + }; + + /* P8_24 (ZCZ ball V7) emmc */ + P8_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_24_default_pin>; + pinctrl-1 = <&P8_24_gpio_pin>; + pinctrl-2 = <&P8_24_gpio_pu_pin>; + pinctrl-3 = <&P8_24_gpio_pd_pin>; + pinctrl-4 = <&P8_24_gpio_input_pin>; + }; + + /* P8_25 (ZCZ ball U7) emmc */ + P8_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P8_25_default_pin>; + pinctrl-1 = <&P8_25_gpio_pin>; + pinctrl-2 = <&P8_25_gpio_pu_pin>; + pinctrl-3 = <&P8_25_gpio_pd_pin>; + pinctrl-4 = <&P8_25_gpio_input_pin>; + }; + + /* P8_26 (ZCZ ball V6) gpio-hog wl1835 */ + + /* P8_27 (ZCZ ball U5) hdmi */ + P8_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_27_default_pin>; + pinctrl-1 = <&P8_27_gpio_pin>; + pinctrl-2 = <&P8_27_gpio_pu_pin>; + pinctrl-3 = <&P8_27_gpio_pd_pin>; + pinctrl-4 = <&P8_27_gpio_input_pin>; + pinctrl-5 = <&P8_27_pruout_pin>; + pinctrl-6 = <&P8_27_pruin_pin>; + }; + + /* P8_28 (ZCZ ball V5) hdmi */ + P8_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_28_default_pin>; + pinctrl-1 = <&P8_28_gpio_pin>; + pinctrl-2 = <&P8_28_gpio_pu_pin>; + pinctrl-3 = <&P8_28_gpio_pd_pin>; + pinctrl-4 = <&P8_28_gpio_input_pin>; + pinctrl-5 = <&P8_28_pruout_pin>; + pinctrl-6 = <&P8_28_pruin_pin>; + }; + + /* P8_29 (ZCZ ball R5) hdmi */ + P8_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_29_default_pin>; + pinctrl-1 = <&P8_29_gpio_pin>; + pinctrl-2 = <&P8_29_gpio_pu_pin>; + pinctrl-3 = <&P8_29_gpio_pd_pin>; + pinctrl-4 = <&P8_29_gpio_input_pin>; + pinctrl-5 = <&P8_29_pruout_pin>; + pinctrl-6 = <&P8_29_pruin_pin>; + }; + + /* P8_30 (ZCZ ball R6) hdmi */ + P8_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P8_30_default_pin>; + pinctrl-1 = <&P8_30_gpio_pin>; + pinctrl-2 = <&P8_30_gpio_pu_pin>; + pinctrl-3 = <&P8_30_gpio_pd_pin>; + pinctrl-4 = <&P8_30_gpio_input_pin>; + pinctrl-5 = <&P8_30_pruout_pin>; + pinctrl-6 = <&P8_30_pruin_pin>; + }; + + /* P8_31 (ZCZ ball V4) hdmi */ + P8_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "qep"; + pinctrl-0 = <&P8_31_default_pin>; + pinctrl-1 = <&P8_31_gpio_pin>; + pinctrl-2 = <&P8_31_gpio_pu_pin>; + pinctrl-3 = <&P8_31_gpio_pd_pin>; + pinctrl-4 = <&P8_31_gpio_input_pin>; + pinctrl-5 = <&P8_31_uart_pin>; + pinctrl-6 = <&P8_31_qep_pin>; + }; + + /* P8_32 (ZCZ ball T5) hdmi */ + P8_32_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P8_32_default_pin>; + pinctrl-1 = <&P8_32_gpio_pin>; + pinctrl-2 = <&P8_32_gpio_pu_pin>; + pinctrl-3 = <&P8_32_gpio_pd_pin>; + pinctrl-4 = <&P8_32_gpio_input_pin>; + pinctrl-5 = <&P8_32_qep_pin>; + }; + + /* P8_33 (ZCZ ball V3) hdmi */ + P8_33_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P8_33_default_pin>; + pinctrl-1 = <&P8_33_gpio_pin>; + pinctrl-2 = <&P8_33_gpio_pu_pin>; + pinctrl-3 = <&P8_33_gpio_pd_pin>; + pinctrl-4 = <&P8_33_gpio_input_pin>; + pinctrl-5 = <&P8_33_qep_pin>; + }; + + /* P8_34 (ZCZ ball U4) hdmi */ + P8_34_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_34_default_pin>; + pinctrl-1 = <&P8_34_gpio_pin>; + pinctrl-2 = <&P8_34_gpio_pu_pin>; + pinctrl-3 = <&P8_34_gpio_pd_pin>; + pinctrl-4 = <&P8_34_gpio_input_pin>; + pinctrl-5 = <&P8_34_pwm_pin>; + }; + + /* P8_35 (ZCZ ball V2) hdmi */ + P8_35_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P8_35_default_pin>; + pinctrl-1 = <&P8_35_gpio_pin>; + pinctrl-2 = <&P8_35_gpio_pu_pin>; + pinctrl-3 = <&P8_35_gpio_pd_pin>; + pinctrl-4 = <&P8_35_gpio_input_pin>; + pinctrl-5 = <&P8_35_qep_pin>; + }; + + /* P8_36 (ZCZ ball U3) hdmi */ + P8_36_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P8_36_default_pin>; + pinctrl-1 = <&P8_36_gpio_pin>; + pinctrl-2 = <&P8_36_gpio_pu_pin>; + pinctrl-3 = <&P8_36_gpio_pd_pin>; + pinctrl-4 = <&P8_36_gpio_input_pin>; + pinctrl-5 = <&P8_36_pwm_pin>; + }; + + /* P8_37 (ZCZ ball U1) hdmi */ + P8_37_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "pwm"; + pinctrl-0 = <&P8_37_default_pin>; + pinctrl-1 = <&P8_37_gpio_pin>; + pinctrl-2 = <&P8_37_gpio_pu_pin>; + pinctrl-3 = <&P8_37_gpio_pd_pin>; + pinctrl-4 = <&P8_37_gpio_input_pin>; + pinctrl-5 = <&P8_37_uart_pin>; + pinctrl-6 = <&P8_37_pwm_pin>; + }; + + /* P8_38 (ZCZ ball U2) hdmi */ + P8_38_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "pwm"; + pinctrl-0 = <&P8_38_default_pin>; + pinctrl-1 = <&P8_38_gpio_pin>; + pinctrl-2 = <&P8_38_gpio_pu_pin>; + pinctrl-3 = <&P8_38_gpio_pd_pin>; + pinctrl-4 = <&P8_38_gpio_input_pin>; + pinctrl-5 = <&P8_38_uart_pin>; + pinctrl-6 = <&P8_38_pwm_pin>; + }; + + /* P8_39 (ZCZ ball T3) hdmi */ + P8_39_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_39_default_pin>; + pinctrl-1 = <&P8_39_gpio_pin>; + pinctrl-2 = <&P8_39_gpio_pu_pin>; + pinctrl-3 = <&P8_39_gpio_pd_pin>; + pinctrl-4 = <&P8_39_gpio_input_pin>; + pinctrl-5 = <&P8_39_qep_pin>; + pinctrl-6 = <&P8_39_pruout_pin>; + pinctrl-7 = <&P8_39_pruin_pin>; + }; + + /* P8_40 (ZCZ ball T4) hdmi */ + P8_40_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_40_default_pin>; + pinctrl-1 = <&P8_40_gpio_pin>; + pinctrl-2 = <&P8_40_gpio_pu_pin>; + pinctrl-3 = <&P8_40_gpio_pd_pin>; + pinctrl-4 = <&P8_40_gpio_input_pin>; + pinctrl-5 = <&P8_40_qep_pin>; + pinctrl-6 = <&P8_40_pruout_pin>; + pinctrl-7 = <&P8_40_pruin_pin>; + }; + + /* P8_41 (ZCZ ball T1) hdmi */ + P8_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_41_default_pin>; + pinctrl-1 = <&P8_41_gpio_pin>; + pinctrl-2 = <&P8_41_gpio_pu_pin>; + pinctrl-3 = <&P8_41_gpio_pd_pin>; + pinctrl-4 = <&P8_41_gpio_input_pin>; + pinctrl-5 = <&P8_41_qep_pin>; + pinctrl-6 = <&P8_41_pruout_pin>; + pinctrl-7 = <&P8_41_pruin_pin>; + }; + + /* P8_42 (ZCZ ball T2) hdmi */ + P8_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P8_42_default_pin>; + pinctrl-1 = <&P8_42_gpio_pin>; + pinctrl-2 = <&P8_42_gpio_pu_pin>; + pinctrl-3 = <&P8_42_gpio_pd_pin>; + pinctrl-4 = <&P8_42_gpio_input_pin>; + pinctrl-5 = <&P8_42_qep_pin>; + pinctrl-6 = <&P8_42_pruout_pin>; + pinctrl-7 = <&P8_42_pruin_pin>; + }; + + /* P8_43 (ZCZ ball R3) hdmi */ + P8_43_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_43_default_pin>; + pinctrl-1 = <&P8_43_gpio_pin>; + pinctrl-2 = <&P8_43_gpio_pu_pin>; + pinctrl-3 = <&P8_43_gpio_pd_pin>; + pinctrl-4 = <&P8_43_gpio_input_pin>; + pinctrl-5 = <&P8_43_pwm_pin>; + pinctrl-6 = <&P8_43_pruout_pin>; + pinctrl-7 = <&P8_43_pruin_pin>; + }; + + /* P8_44 (ZCZ ball R4) hdmi */ + P8_44_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_44_default_pin>; + pinctrl-1 = <&P8_44_gpio_pin>; + pinctrl-2 = <&P8_44_gpio_pu_pin>; + pinctrl-3 = <&P8_44_gpio_pd_pin>; + pinctrl-4 = <&P8_44_gpio_input_pin>; + pinctrl-5 = <&P8_44_pwm_pin>; + pinctrl-6 = <&P8_44_pruout_pin>; + pinctrl-7 = <&P8_44_pruin_pin>; + }; + + /* P8_45 (ZCZ ball R1) hdmi */ + P8_45_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_45_default_pin>; + pinctrl-1 = <&P8_45_gpio_pin>; + pinctrl-2 = <&P8_45_gpio_pu_pin>; + pinctrl-3 = <&P8_45_gpio_pd_pin>; + pinctrl-4 = <&P8_45_gpio_input_pin>; + pinctrl-5 = <&P8_45_pwm_pin>; + pinctrl-6 = <&P8_45_pruout_pin>; + pinctrl-7 = <&P8_45_pruin_pin>; + }; + + /* P8_46 (ZCZ ball R2) hdmi */ + P8_46_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P8_46_default_pin>; + pinctrl-1 = <&P8_46_gpio_pin>; + pinctrl-2 = <&P8_46_gpio_pu_pin>; + pinctrl-3 = <&P8_46_gpio_pd_pin>; + pinctrl-4 = <&P8_46_gpio_input_pin>; + pinctrl-5 = <&P8_46_pwm_pin>; + pinctrl-6 = <&P8_46_pruout_pin>; + pinctrl-7 = <&P8_46_pruin_pin>; + }; + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + + /* P9_02 GND */ + + /* P9_03 3V3 */ + + /* P9_04 3V3 */ + + /* P9_05 VDD_5V */ + + /* P9_06 VDD_5V */ + + /* P9_07 SYS_5V */ + + /* P9_08 SYS_5V */ + + /* P9_09 PWR_BUT */ + + /* P9_10 RSTn */ + + /* P9_11 (ZCZ ball T17) */ + P9_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart"; + pinctrl-0 = <&P9_11_default_pin>; + pinctrl-1 = <&P9_11_gpio_pin>; + pinctrl-2 = <&P9_11_gpio_pu_pin>; + pinctrl-3 = <&P9_11_gpio_pd_pin>; + pinctrl-4 = <&P9_11_gpio_input_pin>; + pinctrl-5 = <&P9_11_uart_pin>; + }; + + /* P9_12 (ZCZ ball U18) */ + P9_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P9_12_default_pin>; + pinctrl-1 = <&P9_12_gpio_pin>; + pinctrl-2 = <&P9_12_gpio_pu_pin>; + pinctrl-3 = <&P9_12_gpio_pd_pin>; + pinctrl-4 = <&P9_12_gpio_input_pin>; + }; + + /* P9_13 (ZCZ ball U17) */ + P9_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart"; + pinctrl-0 = <&P9_13_default_pin>; + pinctrl-1 = <&P9_13_gpio_pin>; + pinctrl-2 = <&P9_13_gpio_pu_pin>; + pinctrl-3 = <&P9_13_gpio_pd_pin>; + pinctrl-4 = <&P9_13_gpio_input_pin>; + pinctrl-5 = <&P9_13_uart_pin>; + }; + + /* P9_14 (ZCZ ball U14) */ + P9_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_14_default_pin>; + pinctrl-1 = <&P9_14_gpio_pin>; + pinctrl-2 = <&P9_14_gpio_pu_pin>; + pinctrl-3 = <&P9_14_gpio_pd_pin>; + pinctrl-4 = <&P9_14_gpio_input_pin>; + pinctrl-5 = <&P9_14_pwm_pin>; + }; + + /* P9_15 (ZCZ ball R13) */ + P9_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_15_default_pin>; + pinctrl-1 = <&P9_15_gpio_pin>; + pinctrl-2 = <&P9_15_gpio_pu_pin>; + pinctrl-3 = <&P9_15_gpio_pd_pin>; + pinctrl-4 = <&P9_15_gpio_input_pin>; + pinctrl-5 = <&P9_15_pwm_pin>; + }; + + /* P9_16 (ZCZ ball T14) */ + P9_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_16_default_pin>; + pinctrl-1 = <&P9_16_gpio_pin>; + pinctrl-2 = <&P9_16_gpio_pu_pin>; + pinctrl-3 = <&P9_16_gpio_pd_pin>; + pinctrl-4 = <&P9_16_gpio_input_pin>; + pinctrl-5 = <&P9_16_pwm_pin>; + }; + + /* P9_17 (ZCZ ball A16) */ + P9_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_17_default_pin>; + pinctrl-1 = <&P9_17_gpio_pin>; + pinctrl-2 = <&P9_17_gpio_pu_pin>; + pinctrl-3 = <&P9_17_gpio_pd_pin>; + pinctrl-4 = <&P9_17_gpio_input_pin>; + pinctrl-5 = <&P9_17_spi_cs_pin>; + pinctrl-6 = <&P9_17_i2c_pin>; + pinctrl-7 = <&P9_17_pwm_pin>; + pinctrl-8 = <&P9_17_pru_uart_pin>; + }; + + /* P9_18 (ZCZ ball B16) */ + P9_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_18_default_pin>; + pinctrl-1 = <&P9_18_gpio_pin>; + pinctrl-2 = <&P9_18_gpio_pu_pin>; + pinctrl-3 = <&P9_18_gpio_pd_pin>; + pinctrl-4 = <&P9_18_gpio_input_pin>; + pinctrl-5 = <&P9_18_spi_pin>; + pinctrl-6 = <&P9_18_i2c_pin>; + pinctrl-7 = <&P9_18_pwm_pin>; + pinctrl-8 = <&P9_18_pru_uart_pin>; + }; + + /* P9_19 (ZCZ ball D17) i2c */ + P9_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer"; + pinctrl-0 = <&P9_19_default_pin>; + pinctrl-1 = <&P9_19_gpio_pin>; + pinctrl-2 = <&P9_19_gpio_pu_pin>; + pinctrl-3 = <&P9_19_gpio_pd_pin>; + pinctrl-4 = <&P9_19_gpio_input_pin>; + pinctrl-5 = <&P9_19_spi_cs_pin>; + pinctrl-6 = <&P9_19_can_pin>; + pinctrl-7 = <&P9_19_i2c_pin>; + pinctrl-8 = <&P9_19_pru_uart_pin>; + pinctrl-9 = <&P9_19_timer_pin>; + }; + + /* P9_20 (ZCZ ball D18) i2c */ + P9_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer"; + pinctrl-0 = <&P9_20_default_pin>; + pinctrl-1 = <&P9_20_gpio_pin>; + pinctrl-2 = <&P9_20_gpio_pu_pin>; + pinctrl-3 = <&P9_20_gpio_pd_pin>; + pinctrl-4 = <&P9_20_gpio_input_pin>; + pinctrl-5 = <&P9_20_spi_cs_pin>; + pinctrl-6 = <&P9_20_can_pin>; + pinctrl-7 = <&P9_20_i2c_pin>; + pinctrl-8 = <&P9_20_pru_uart_pin>; + pinctrl-9 = <&P9_20_timer_pin>; + }; + + /* P9_21 (ZCZ ball B17) */ + P9_21_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "uart", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_21_default_pin>; + pinctrl-1 = <&P9_21_gpio_pin>; + pinctrl-2 = <&P9_21_gpio_pu_pin>; + pinctrl-3 = <&P9_21_gpio_pd_pin>; + pinctrl-4 = <&P9_21_gpio_input_pin>; + pinctrl-5 = <&P9_21_spi_pin>; + pinctrl-6 = <&P9_21_uart_pin>; + pinctrl-7 = <&P9_21_i2c_pin>; + pinctrl-8 = <&P9_21_pwm_pin>; + pinctrl-9 = <&P9_21_pru_uart_pin>; + }; + + /* P9_22 (ZCZ ball A17) */ + P9_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "uart", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P9_22_default_pin>; + pinctrl-1 = <&P9_22_gpio_pin>; + pinctrl-2 = <&P9_22_gpio_pu_pin>; + pinctrl-3 = <&P9_22_gpio_pd_pin>; + pinctrl-4 = <&P9_22_gpio_input_pin>; + pinctrl-5 = <&P9_22_spi_sclk_pin>; + pinctrl-6 = <&P9_22_uart_pin>; + pinctrl-7 = <&P9_22_i2c_pin>; + pinctrl-8 = <&P9_22_pwm_pin>; + pinctrl-9 = <&P9_22_pru_uart_pin>; + }; + + /* P9_23 (ZCZ ball V14) */ + P9_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P9_23_default_pin>; + pinctrl-1 = <&P9_23_gpio_pin>; + pinctrl-2 = <&P9_23_gpio_pu_pin>; + pinctrl-3 = <&P9_23_gpio_pd_pin>; + pinctrl-4 = <&P9_23_gpio_input_pin>; + pinctrl-5 = <&P9_23_pwm_pin>; + }; + + /* P9_24 (ZCZ ball D15) */ + P9_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin"; + pinctrl-0 = <&P9_24_default_pin>; + pinctrl-1 = <&P9_24_gpio_pin>; + pinctrl-2 = <&P9_24_gpio_pu_pin>; + pinctrl-3 = <&P9_24_gpio_pd_pin>; + pinctrl-4 = <&P9_24_gpio_input_pin>; + pinctrl-5 = <&P9_24_uart_pin>; + pinctrl-6 = <&P9_24_can_pin>; + pinctrl-7 = <&P9_24_i2c_pin>; + pinctrl-8 = <&P9_24_pru_uart_pin>; + pinctrl-9 = <&P9_24_pruin_pin>; + }; + + /* P9_25 (ZCZ ball A14) audio */ + P9_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_25_default_pin>; + pinctrl-1 = <&P9_25_gpio_pin>; + pinctrl-2 = <&P9_25_gpio_pu_pin>; + pinctrl-3 = <&P9_25_gpio_pd_pin>; + pinctrl-4 = <&P9_25_gpio_input_pin>; + pinctrl-5 = <&P9_25_qep_pin>; + pinctrl-6 = <&P9_25_pruout_pin>; + pinctrl-7 = <&P9_25_pruin_pin>; + }; + + /* P9_26 (ZCZ ball D16) */ + P9_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin"; + pinctrl-0 = <&P9_26_default_pin>; + pinctrl-1 = <&P9_26_gpio_pin>; + pinctrl-2 = <&P9_26_gpio_pu_pin>; + pinctrl-3 = <&P9_26_gpio_pd_pin>; + pinctrl-4 = <&P9_26_gpio_input_pin>; + pinctrl-5 = <&P9_26_uart_pin>; + pinctrl-6 = <&P9_26_can_pin>; + pinctrl-7 = <&P9_26_i2c_pin>; + pinctrl-8 = <&P9_26_pru_uart_pin>; + pinctrl-9 = <&P9_26_pruin_pin>; + }; + + /* P9_27 (ZCZ ball C13) */ + P9_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_27_default_pin>; + pinctrl-1 = <&P9_27_gpio_pin>; + pinctrl-2 = <&P9_27_gpio_pu_pin>; + pinctrl-3 = <&P9_27_gpio_pd_pin>; + pinctrl-4 = <&P9_27_gpio_input_pin>; + pinctrl-5 = <&P9_27_qep_pin>; + pinctrl-6 = <&P9_27_pruout_pin>; + pinctrl-7 = <&P9_27_pruin_pin>; + }; + + /* P9_28 (ZCZ ball C12) audio */ + P9_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "pwm", "pwm2", "pruout", "pruin"; + pinctrl-0 = <&P9_28_default_pin>; + pinctrl-1 = <&P9_28_gpio_pin>; + pinctrl-2 = <&P9_28_gpio_pu_pin>; + pinctrl-3 = <&P9_28_gpio_pd_pin>; + pinctrl-4 = <&P9_28_gpio_input_pin>; + pinctrl-5 = <&P9_28_spi_cs_pin>; + pinctrl-6 = <&P9_28_pwm_pin>; + pinctrl-7 = <&P9_28_pwm2_pin>; + pinctrl-8 = <&P9_28_pruout_pin>; + pinctrl-9 = <&P9_28_pruin_pin>; + }; + + /* P9_29 (ZCZ ball B13) audio */ + P9_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P9_29_default_pin>; + pinctrl-1 = <&P9_29_gpio_pin>; + pinctrl-2 = <&P9_29_gpio_pu_pin>; + pinctrl-3 = <&P9_29_gpio_pd_pin>; + pinctrl-4 = <&P9_29_gpio_input_pin>; + pinctrl-5 = <&P9_29_spi_pin>; + pinctrl-6 = <&P9_29_pwm_pin>; + pinctrl-7 = <&P9_29_pruout_pin>; + pinctrl-8 = <&P9_29_pruin_pin>; + }; + + /* P9_30 (ZCZ ball D12) gpio-hog wl1835 */ + + /* P9_31 (ZCZ ball A13) audio */ + P9_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P9_31_default_pin>; + pinctrl-1 = <&P9_31_gpio_pin>; + pinctrl-2 = <&P9_31_gpio_pu_pin>; + pinctrl-3 = <&P9_31_gpio_pd_pin>; + pinctrl-4 = <&P9_31_gpio_input_pin>; + pinctrl-5 = <&P9_31_spi_sclk_pin>; + pinctrl-6 = <&P9_31_pwm_pin>; + pinctrl-7 = <&P9_31_pruout_pin>; + pinctrl-8 = <&P9_31_pruin_pin>; + }; + + /* P9_32 VADC */ + + /* P9_33 (ZCZ ball C8) AIN4 */ + + /* P9_34 AGND */ + + /* P9_35 (ZCZ ball A8) AIN6 */ + + /* P9_36 (ZCZ ball B8) AIN5 */ + + /* P9_37 (ZCZ ball B7) AIN2 */ + + /* P9_38 (ZCZ ball A7) AIN3 */ + + /* P9_39 (ZCZ ball B6) AIN0 */ + + /* P9_40 (ZCZ ball C7) AIN1 */ + + /* P9_41 (ZCZ ball D14) */ + P9_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer", "pruin"; + pinctrl-0 = <&P9_41_default_pin>; + pinctrl-1 = <&P9_41_gpio_pin>; + pinctrl-2 = <&P9_41_gpio_pu_pin>; + pinctrl-3 = <&P9_41_gpio_pd_pin>; + pinctrl-4 = <&P9_41_gpio_input_pin>; + pinctrl-5 = <&P9_41_timer_pin>; + pinctrl-6 = <&P9_41_pruin_pin>; + }; + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) */ + P9_91_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_91_default_pin>; + pinctrl-1 = <&P9_91_gpio_pin>; + pinctrl-2 = <&P9_91_gpio_pu_pin>; + pinctrl-3 = <&P9_91_gpio_pd_pin>; + pinctrl-4 = <&P9_91_gpio_input_pin>; + pinctrl-5 = <&P9_91_qep_pin>; + pinctrl-6 = <&P9_91_pruout_pin>; + pinctrl-7 = <&P9_91_pruin_pin>; + }; + + /* P9_42 (ZCZ ball C18) */ + P9_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "spi_sclk", "uart", "pwm", "pru_ecap"; + pinctrl-0 = <&P9_42_default_pin>; + pinctrl-1 = <&P9_42_gpio_pin>; + pinctrl-2 = <&P9_42_gpio_pu_pin>; + pinctrl-3 = <&P9_42_gpio_pd_pin>; + pinctrl-4 = <&P9_42_gpio_input_pin>; + pinctrl-5 = <&P9_42_spi_cs_pin>; + pinctrl-6 = <&P9_42_spi_sclk_pin>; + pinctrl-7 = <&P9_42_uart_pin>; + pinctrl-8 = <&P9_42_pwm_pin>; + pinctrl-9 = <&P9_42_pru_ecap_pin>; + }; + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) */ + P9_92_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_92_default_pin>; + pinctrl-1 = <&P9_92_gpio_pin>; + pinctrl-2 = <&P9_92_gpio_pu_pin>; + pinctrl-3 = <&P9_92_gpio_pd_pin>; + pinctrl-4 = <&P9_92_gpio_input_pin>; + pinctrl-5 = <&P9_92_qep_pin>; + pinctrl-6 = <&P9_92_pruout_pin>; + pinctrl-7 = <&P9_92_pruin_pin>; + }; + + /* P9_43 GND */ + + /* P9_44 GND */ + + /* P9_45 GND */ + + /* P9_46 GND */ + + + cape-universal { + compatible = "gpio-of-helper"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + P8_03 { + gpio-name = "P8_03"; + gpio = <&gpio1 6 0>; + input; + dir-changeable; + }; + + P8_04 { + gpio-name = "P8_04"; + gpio = <&gpio1 7 0>; + input; + dir-changeable; + }; + + P8_05 { + gpio-name = "P8_05"; + gpio = <&gpio1 2 0>; + input; + dir-changeable; + }; + + P8_06 { + gpio-name = "P8_06"; + gpio = <&gpio1 3 0>; + input; + dir-changeable; + }; + + P8_07 { + gpio-name = "P8_07"; + gpio = <&gpio2 2 0>; + input; + dir-changeable; + }; + + P8_08 { + gpio-name = "P8_08"; + gpio = <&gpio2 3 0>; + input; + dir-changeable; + }; + + P8_09 { + gpio-name = "P8_09"; + gpio = <&gpio2 5 0>; + input; + dir-changeable; + }; + + P8_10 { + gpio-name = "P8_10"; + gpio = <&gpio2 4 0>; + input; + dir-changeable; + }; + + P8_11 { + gpio-name = "P8_11"; + gpio = <&gpio1 13 0>; + input; + dir-changeable; + }; + + P8_12 { + gpio-name = "P8_12"; + gpio = <&gpio1 12 0>; + input; + dir-changeable; + }; + + P8_13 { + gpio-name = "P8_13"; + gpio = <&gpio0 23 0>; + input; + dir-changeable; + }; + + P8_15 { + gpio-name = "P8_15"; + gpio = <&gpio1 15 0>; + input; + dir-changeable; + }; + + P8_16 { + gpio-name = "P8_16"; + gpio = <&gpio1 14 0>; + input; + dir-changeable; + }; + + P8_18 { + gpio-name = "P8_18"; + gpio = <&gpio2 1 0>; + input; + dir-changeable; + }; + + P8_19 { + gpio-name = "P8_19"; + gpio = <&gpio0 22 0>; + input; + dir-changeable; + }; + + P8_20 { + gpio-name = "P8_20"; + gpio = <&gpio1 31 0>; + input; + dir-changeable; + }; + + P8_21 { + gpio-name = "P8_21"; + gpio = <&gpio1 30 0>; + input; + dir-changeable; + }; + + P8_22 { + gpio-name = "P8_22"; + gpio = <&gpio1 5 0>; + input; + dir-changeable; + }; + + P8_23 { + gpio-name = "P8_23"; + gpio = <&gpio1 4 0>; + input; + dir-changeable; + }; + + P8_24 { + gpio-name = "P8_24"; + gpio = <&gpio1 1 0>; + input; + dir-changeable; + }; + + P8_25 { + gpio-name = "P8_25"; + gpio = <&gpio1 0 0>; + input; + dir-changeable; + }; + + P8_27 { + gpio-name = "P8_27"; + gpio = <&gpio2 22 0>; + input; + dir-changeable; + }; + + P8_28 { + gpio-name = "P8_28"; + gpio = <&gpio2 24 0>; + input; + dir-changeable; + }; + + P8_29 { + gpio-name = "P8_29"; + gpio = <&gpio2 23 0>; + input; + dir-changeable; + }; + + P8_30 { + gpio-name = "P8_30"; + gpio = <&gpio2 25 0>; + input; + dir-changeable; + }; + + P8_31 { + gpio-name = "P8_31"; + gpio = <&gpio0 10 0>; + input; + dir-changeable; + }; + + P8_32 { + gpio-name = "P8_32"; + gpio = <&gpio0 11 0>; + input; + dir-changeable; + }; + + P8_33 { + gpio-name = "P8_33"; + gpio = <&gpio0 9 0>; + input; + dir-changeable; + }; + + P8_34 { + gpio-name = "P8_34"; + gpio = <&gpio2 17 0>; + input; + dir-changeable; + }; + + P8_35 { + gpio-name = "P8_35"; + gpio = <&gpio0 8 0>; + input; + dir-changeable; + }; + + P8_36 { + gpio-name = "P8_36"; + gpio = <&gpio2 16 0>; + input; + dir-changeable; + }; + + P8_37 { + gpio-name = "P8_37"; + gpio = <&gpio2 14 0>; + input; + dir-changeable; + }; + + P8_38 { + gpio-name = "P8_38"; + gpio = <&gpio2 15 0>; + input; + dir-changeable; + }; + + P8_39 { + gpio-name = "P8_39"; + gpio = <&gpio2 12 0>; + input; + dir-changeable; + }; + + P8_40 { + gpio-name = "P8_40"; + gpio = <&gpio2 13 0>; + input; + dir-changeable; + }; + + P8_41 { + gpio-name = "P8_41"; + gpio = <&gpio2 10 0>; + input; + dir-changeable; + }; + + P8_42 { + gpio-name = "P8_42"; + gpio = <&gpio2 11 0>; + input; + dir-changeable; + }; + + P8_43 { + gpio-name = "P8_43"; + gpio = <&gpio2 8 0>; + input; + dir-changeable; + }; + + P8_44 { + gpio-name = "P8_44"; + gpio = <&gpio2 9 0>; + input; + dir-changeable; + }; + + P8_45 { + gpio-name = "P8_45"; + gpio = <&gpio2 6 0>; + input; + dir-changeable; + }; + + P8_46 { + gpio-name = "P8_46"; + gpio = <&gpio2 7 0>; + input; + dir-changeable; + }; + + P9_11 { + gpio-name = "P9_11"; + gpio = <&gpio0 30 0>; + input; + dir-changeable; + }; + + P9_12 { + gpio-name = "P9_12"; + gpio = <&gpio1 28 0>; + input; + dir-changeable; + }; + + P9_13 { + gpio-name = "P9_13"; + gpio = <&gpio0 31 0>; + input; + dir-changeable; + }; + + P9_14 { + gpio-name = "P9_14"; + gpio = <&gpio1 18 0>; + input; + dir-changeable; + }; + + P9_15 { + gpio-name = "P9_15"; + gpio = <&gpio1 16 0>; + input; + dir-changeable; + }; + + P9_16 { + gpio-name = "P9_16"; + gpio = <&gpio1 19 0>; + input; + dir-changeable; + }; + + P9_17 { + gpio-name = "P9_17"; + gpio = <&gpio0 5 0>; + input; + dir-changeable; + }; + + P9_18 { + gpio-name = "P9_18"; + gpio = <&gpio0 4 0>; + input; + dir-changeable; + }; + + P9_19 { + gpio-name = "P9_19"; + gpio = <&gpio0 13 0>; + input; + dir-changeable; + }; + + P9_20 { + gpio-name = "P9_20"; + gpio = <&gpio0 12 0>; + input; + dir-changeable; + }; + + P9_21 { + gpio-name = "P9_21"; + gpio = <&gpio0 3 0>; + input; + dir-changeable; + }; + + P9_22 { + gpio-name = "P9_22"; + gpio = <&gpio0 2 0>; + input; + dir-changeable; + }; + + P9_23 { + gpio-name = "P9_23"; + gpio = <&gpio1 17 0>; + input; + dir-changeable; + }; + + P9_24 { + gpio-name = "P9_24"; + gpio = <&gpio0 15 0>; + input; + dir-changeable; + }; + + P9_25 { + gpio-name = "P9_25"; + gpio = <&gpio3 21 0>; + input; + dir-changeable; + }; + + P9_26 { + gpio-name = "P9_26"; + gpio = <&gpio0 14 0>; + input; + dir-changeable; + }; + + P9_27 { + gpio-name = "P9_27"; + gpio = <&gpio3 19 0>; + input; + dir-changeable; + }; + + P9_28 { + gpio-name = "P9_28"; + gpio = <&gpio3 17 0>; + input; + dir-changeable; + }; + + P9_29 { + gpio-name = "P9_29"; + gpio = <&gpio3 15 0>; + input; + dir-changeable; + }; + + P9_31 { + gpio-name = "P9_31"; + gpio = <&gpio3 14 0>; + input; + dir-changeable; + }; + + P9_41 { + gpio-name = "P9_41"; + gpio = <&gpio0 20 0>; + input; + dir-changeable; + }; + + P9_91 { + gpio-name = "P9_91"; + gpio = <&gpio3 20 0>; + input; + dir-changeable; + }; + + P9_42 { + gpio-name = "P9_42"; + gpio = <&gpio0 7 0>; + input; + dir-changeable; + }; + + P9_92 { + gpio-name = "P9_92"; + gpio = <&gpio3 18 0>; + input; + dir-changeable; + }; + + }; +}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-wireless-uboot-univ.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless-uboot-univ.dts new file mode 100644 index 0000000..5d87c70 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless-uboot-univ.dts @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-wireless-common-univ.dtsi" + +/ { + model = "TI AM335x BeagleBone Green Wireless"; + compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&gpio1 { + ls_buf_en { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LS_BUF_EN"; + }; +}; + +/* BT_AUD_OUT from wl1835 has to be pulled low when WL_EN is activated.*/ +/* in case it isn't, wilink8 ends up in one of the test modes that */ +/* intruces various issues (elp wkaeup timeouts etc.) */ +/* On the BBGW this pin is routed through the level shifter (U21) that */ +/* introduces a pullup on the line and wilink8 ends up in a bad state. */ +/* use a gpio hog to force this pin low. An alternative may be adding */ +/* an external pulldown on U21 pin 4. */ + +&gpio3 { + bt_aud_in { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "MCASP0_AHCLKR"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts index 57731f0..de299ad 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -11,6 +11,7 @@ #include "am335x-bone-common.dtsi" #include "am335x-bonegreen-common.dtsi" #include +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone Green Wireless"; diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts index a8b4d96..575a5a9 100644 --- a/arch/arm/boot/dts/am335x-bonegreen.dts +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -10,6 +10,7 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" #include "am335x-bonegreen-common.dtsi" +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone Green"; diff --git b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi new file mode 100644 index 0000000..d2704c6 --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +#include "am335x-peripheral-ttyS1.dtsi" +#include "am335x-bone-pinmux-ttyS1.dtsi" + +#include "am335x-peripheral-ttyS2.dtsi" +#include "am335x-bone-pinmux-ttyS2.dtsi" + +#include "am335x-peripheral-ttyS4.dtsi" +#include "am335x-bone-pinmux-ttyS4.dtsi" + +&am33xx_pinmux { + user_leds_s1: user_leds_s1 { + pinctrl-single,pins = < + 0x98 0x7 /* gpmc_wen.gpio2_4, OUTPUT | MODE7 */ + 0x9c 0x7 /* gpmc_ben0_cle.gpio2_5, OUTPUT | MODE7 */ + >; + }; + + bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins { + pinctrl-single,pins = < + BONE_P9_14 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + >; + }; + + keymap3_pins: pinmux_keymap3_pins { + pinctrl-single,pins = < + 0x040 0x2f /* KEY_UP gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ + 0x04c 0x2f /* KEY_DOWN gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ + 0x078 0x2f /* KEY_RIGHT gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */ + 0x164 0x2f /* KEY_LEFT ecap0_in_pwm0_out.gpio0_7, INPUT | PULLDIS | MODE7 */ + 0x1a4 0x2f /* KEY_ENTER mcasp0_fxr.gpio3_19, INPUT | PULLDIS | MODE7 */ + >; + }; + + edt_ft5306_ts_pins: pinmux_edt_ft5306_ts_pins { + pinctrl-single,pins = < + /* CAP_TSC gpmc_a1.gpio1_17, INPUT | MODE7 */ + BONE_P9_23 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + /* spi0_d1.i2c1_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_18 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + /* spi0_cs0.i2c1_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_17 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + >; + }; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,pins = < + 0x190 0x20 /* mcasp0_aclkx.mcasp0_aclkx, INPUT | MODE0 */ + 0x194 0x20 /* mcasp0_fsx.mcasp0_fsx, INPUT | MODE0 */ + 0x198 0x20 /* mcasp0_axr0.mcasp0_axr0, INPUT | MODE0 */ + 0x19c 0x22 /* mcasp0_ahclkr.mcasp0_axr2, INPUT | MODE2 */ + >; + }; +}; + +&epwmss1 { + status = "okay"; +}; + + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&bb_lcd_pwm_backlight_pins>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + edt-ft5306@38 { + status = "okay"; + compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5306_ts_pins>; + + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <17 0>; + + touchscreen-size-x = <600>; + touchscreen-size-y = <1024>; + touchscreen-inverted-x; + touchscreen-inverted-y; + touchscreen-swapped-x-y; + }; + + tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +/ { + backlight { + status = "okay"; + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keymap3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + linux,code = <105>; + label = "left"; + gpios = <&gpio0 7 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@2 { + debounce_interval = <50>; + linux,code = <106>; + label = "right"; + gpios = <&gpio1 28 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@3 { + debounce_interval = <50>; + linux,code = <103>; + label = "up"; + gpios = <&gpio1 16 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@4 { + debounce_interval = <50>; + linux,code = <108>; + label = "down"; + gpios = <&gpio1 19 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@5 { + debounce_interval = <50>; + linux,code = <28>; + label = "enter"; + gpios = <&gpio3 19 0x1>; + gpio-key,wakeup; + }; + }; + + gpio-leds-cape-lcd { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pinctrl-0 = <&user_leds_s1>; + + lcd-led0 { + label = "lcd:green:usr0"; + gpios = <&gpio2 4 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + lcd-led1 { + label = "lcd:green:usr1"; + gpios = <&gpio2 5 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack"; + }; +}; + +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" +#include "am335x-bone-pinmux-panel-1024x600-24bit.dtsi" diff --git b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi new file mode 100644 index 0000000..539409c --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +#include "am335x-peripheral-ttyS1.dtsi" +#include "am335x-bone-pinmux-ttyS1.dtsi" + +#include "am335x-peripheral-ttyS2.dtsi" +#include "am335x-bone-pinmux-ttyS2.dtsi" + +#include "am335x-peripheral-ttyS4.dtsi" +#include "am335x-bone-pinmux-ttyS4.dtsi" + +&am33xx_pinmux { + user_leds_s1: user_leds_s1 { + pinctrl-single,pins = < + 0x98 0x7 /* gpmc_wen.gpio2_4, OUTPUT | MODE7 */ + 0x9c 0x7 /* gpmc_ben0_cle.gpio2_5, OUTPUT | MODE7 */ + >; + }; + + bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins { + pinctrl-single,pins = < + BONE_P9_14 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + >; + }; + + keymap3_pins: pinmux_keymap3_pins { + pinctrl-single,pins = < + 0x040 0x2f /* KEY_UP gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ + 0x04c 0x2f /* KEY_DOWN gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ + 0x078 0x2f /* KEY_RIGHT gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */ + 0x164 0x2f /* KEY_LEFT ecap0_in_pwm0_out.gpio0_7, INPUT | PULLDIS | MODE7 */ + 0x1a4 0x2f /* KEY_ENTER mcasp0_fxr.gpio3_19, INPUT | PULLDIS | MODE7 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + /* spi0_d1.i2c1_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_18 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + /* spi0_cs0.i2c1_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_17 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + >; + }; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,pins = < + 0x190 0x20 /* mcasp0_aclkx.mcasp0_aclkx, INPUT | MODE0 */ + 0x194 0x20 /* mcasp0_fsx.mcasp0_fsx, INPUT | MODE0 */ + 0x198 0x20 /* mcasp0_axr0.mcasp0_axr0, INPUT | MODE0 */ + 0x19c 0x22 /* mcasp0_ahclkr.mcasp0_axr2, INPUT | MODE2 */ + >; + }; +}; + +&epwmss1 { + status = "okay"; +}; + + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&bb_lcd_pwm_backlight_pins>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +/ { + backlight { + status = "okay"; + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keymap3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + linux,code = <105>; + label = "left"; + gpios = <&gpio0 7 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@2 { + debounce_interval = <50>; + linux,code = <106>; + label = "right"; + gpios = <&gpio1 28 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@3 { + debounce_interval = <50>; + linux,code = <103>; + label = "up"; + gpios = <&gpio1 16 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@4 { + debounce_interval = <50>; + linux,code = <108>; + label = "down"; + gpios = <&gpio1 19 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@5 { + debounce_interval = <50>; + linux,code = <28>; + label = "enter"; + gpios = <&gpio3 19 0x1>; + gpio-key,wakeup; + }; + }; + + gpio-leds-cape-lcd { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pinctrl-0 = <&user_leds_s1>; + + lcd-led0 { + label = "lcd:green:usr0"; + gpios = <&gpio2 4 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + lcd-led1 { + label = "lcd:green:usr1"; + gpios = <&gpio2 5 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack"; + }; +}; + +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" +#include "am335x-bone-pinmux-panel-1024x600-24bit.dtsi" diff --git b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi new file mode 100644 index 0000000..bce6ac5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +&am33xx_pinmux { + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + BONE_P9_20 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_ctsn.i2c2_sda */ + BONE_P9_19 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_rtsn.i2c2_scl */ + >; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + rtc@68 { + compatible = "maxim,ds1307"; + reg = <0x68>; + }; +}; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index 4d96901..2e2f06b 100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -13,6 +13,7 @@ #include #include +/* #include "am335x-bone-jtag.dtsi" */ / { model = "Octavo Systems OSD3358-SM-RED"; @@ -40,7 +41,6 @@ &am33xx_pinmux { nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ @@ -64,12 +64,6 @@ >; }; - nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - >; - }; - mcasp0_pins: mcasp0-pins { pinctrl-single,pins = < AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ @@ -124,9 +118,8 @@ compatible = "nxp,tda998x"; reg = <0x70>; - pinctrl-names = "default", "off"; + pinctrl-names = "default"; pinctrl-0 = <&nxp_hdmi_bonelt_pins>; - pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ /* video-ports = <0x234501>; */ @@ -264,9 +257,6 @@ }; &am33xx_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin>; - user_leds_s0: user-leds-s0 { pinctrl-single,pins = < AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ @@ -290,12 +280,6 @@ >; }; - clkout2_pin: pinmux-clkout2-pin { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; - }; - cpsw_default: cpsw-default { pinctrl-single,pins = < /* Slave 1 */ diff --git b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi new file mode 100644 index 0000000..4335e39 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&dcan0 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi new file mode 100644 index 0000000..02b5bd1 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&dcan1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi new file mode 100644 index 0000000..603f34e --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + + bus-width = <8>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi new file mode 100644 index 0000000..ed9a0b5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&i2c2 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi new file mode 100644 index 0000000..1dfd26a --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi new file mode 100644 index 0000000..f7c8f8a --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&lcdc { + status = "okay"; + blue-and-red-wiring = "crossed"; +}; + +/ { + panel { + status = "okay"; + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <0>; + raster-order = <1>; + fifo-th = <0>; + }; + display-timings { + native-mode = <&timing0>; + timing0: 1024x600 { + clock-frequency = <36000000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <1>; + hback-porch = <45>; + hsync-len = <30>; + vback-porch = <22>; + vfront-porch = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi new file mode 100644 index 0000000..969e352 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi0 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi new file mode 100644 index 0000000..ac5fe97 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi new file mode 100644 index 0000000..ac5fe97 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi new file mode 100644 index 0000000..f59fa4c --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi new file mode 100644 index 0000000..a25d6cf --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart2 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi new file mode 100644 index 0000000..adc89f0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart4 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi new file mode 100644 index 0000000..8b42fb0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart5 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index 62fe5ca..9f4142c 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -60,24 +60,24 @@ }; &am33xx_pinmux { - i2c2_pins: pinmux-i2c2-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ - >; - }; +// i2c2_pins: pinmux-i2c2-pins { +// pinctrl-single,pins = < +// AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ +// AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ +// >; +// }; - ehrpwm0_pins: pinmux-ehrpwm0-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */ - >; - }; +// ehrpwm0_pins: pinmux-ehrpwm0-pins { +// pinctrl-single,pins = < +// AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */ +// >; +// }; - ehrpwm1_pins: pinmux-ehrpwm1-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */ - >; - }; +// ehrpwm1_pins: pinmux-ehrpwm1-pins { +// pinctrl-single,pins = < +// AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */ +// >; +// }; mmc0_pins: pinmux-mmc0-pins { pinctrl-single,pins = < @@ -88,27 +88,26 @@ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */ >; }; - spi0_pins: pinmux-spi0-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */ - >; - }; +// spi0_pins: pinmux-spi0-pins { +// pinctrl-single,pins = < +// AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */ +// AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */ +// AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */ +// AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */ +// >; +// }; - spi1_pins: pinmux-spi1-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */ - AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */ - AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */ - >; - }; +// spi1_pins: pinmux-spi1-pins { +// pinctrl-single,pins = < +// AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */ +// AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */ +// AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */ +// AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */ +// >; +// }; usr_leds_pins: pinmux-usr-leds-pins { pinctrl-single,pins = < @@ -126,12 +125,839 @@ >; }; - uart4_pins: pinmux-uart4-pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ - AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */ - >; - }; +// uart4_pins: pinmux-uart4-pins { +// pinctrl-single,pins = < +// AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ +// AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */ +// >; +// }; + + /************************/ + /* P1 Header */ + /************************/ + + /* P1_01 VIN-AC */ + + /* P1_02 (ZCZ ball R5) gpio2_23 */ + P1_02_default_pin: pinmux_P1_02_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P1_02_gpio_pin: pinmux_P1_02_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P1_02_gpio_pu_pin: pinmux_P1_02_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P1_02_gpio_pd_pin: pinmux_P1_02_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P1_02_gpio_input_pin: pinmux_P1_02_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE7) >; }; /* lcd_hsync.gpio2_23 */ + P1_02_pruout_pin: pinmux_P1_02_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_hsync.pru1_out9 */ + P1_02_pruin_pin: pinmux_P1_02_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE6) >; }; /* lcd_hsync.pru1_in9 */ + + /* P1_03 (ZCZ ball F15) usb1_vbus_out */ + + /* P1_04 (ZCZ ball R6) gpio2_25 */ + P1_04_default_pin: pinmux_P1_04_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P1_04_gpio_pin: pinmux_P1_04_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P1_04_gpio_pu_pin: pinmux_P1_04_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P1_04_gpio_pd_pin: pinmux_P1_04_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P1_04_gpio_input_pin: pinmux_P1_04_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE7) >; }; /* lcd_ac_bias_en.gpio2_25 */ + P1_04_pruout_pin: pinmux_P1_04_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_ac_bias_en.pru1_out11 */ + P1_04_pruin_pin: pinmux_P1_04_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE6) >; }; /* lcd_ac_bias_en.pru1_in11 */ + + /* P1_05 (ZCZ ball T18) usb1_vbus_in */ + + /* P1_06 (ZCZ ball A16) spi0_cs0 */ + P1_06_default_pin: pinmux_P1_06_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_cs0.spi0_cs0 */ + P1_06_gpio_pin: pinmux_P1_06_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P1_06_gpio_pu_pin: pinmux_P1_06_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P1_06_gpio_pd_pin: pinmux_P1_06_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P1_06_gpio_input_pin: pinmux_P1_06_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_INPUT | MUX_MODE7) >; }; /* spi0_cs0.gpio0_5 */ + P1_06_spi_cs_pin: pinmux_P1_06_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_cs0.spi0_cs0 */ + P1_06_i2c_pin: pinmux_P1_06_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_cs0.i2c1_scl */ + P1_06_pwm_pin: pinmux_P1_06_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_cs0.ehrpwm0_synci */ + P1_06_pru_uart_pin: pinmux_P1_06_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_cs0.pr1_uart0_txd */ + + /* P1_07 VIN-USB */ + + /* P1_08 (ZCZ ball A17) spi0_sclk */ + P1_08_default_pin: pinmux_P1_08_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_sclk.spi0_sclk */ + P1_08_gpio_pin: pinmux_P1_08_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P1_08_gpio_pu_pin: pinmux_P1_08_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P1_08_gpio_pd_pin: pinmux_P1_08_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P1_08_gpio_input_pin: pinmux_P1_08_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_INPUT | MUX_MODE7) >; }; /* spi0_sclk.gpio0_2 */ + P1_08_spi_sclk_pin: pinmux_P1_08_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_sclk.spi0_sclk */ + P1_08_uart_pin: pinmux_P1_08_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* spi0_sclk.uart2_rxd */ + P1_08_i2c_pin: pinmux_P1_08_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_sclk.i2c2_sda */ + P1_08_pwm_pin: pinmux_P1_08_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_sclk.ehrpwm0a */ + P1_08_pru_uart_pin: pinmux_P1_08_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_sclk.pr1_uart0_cts_n */ + + /* P1_09 (ZCZ ball R18) USB1-DN */ + + /* P1_10 (ZCZ ball B17) spi0_d0 */ + P1_10_default_pin: pinmux_P1_10_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d0.spi0_d0 */ + P1_10_gpio_pin: pinmux_P1_10_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P1_10_gpio_pu_pin: pinmux_P1_10_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P1_10_gpio_pd_pin: pinmux_P1_10_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P1_10_gpio_input_pin: pinmux_P1_10_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_INPUT | MUX_MODE7) >; }; /* spi0_d0.gpio0_3 */ + P1_10_spi_pin: pinmux_P1_10_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d0.spi0_d0 */ + P1_10_uart_pin: pinmux_P1_10_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* spi0_d0.uart2_txd */ + P1_10_i2c_pin: pinmux_P1_10_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_d0.i2c2_scl */ + P1_10_pwm_pin: pinmux_P1_10_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_d0.ehrpwm0b */ + P1_10_pru_uart_pin: pinmux_P1_10_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_d0.pr1_uart0_rts_n */ + + /* P1_11 (ZCZ ball R17) USB1-DP */ + + /* P1_12 (ZCZ ball B16) spi0_d1 */ + P1_12_default_pin: pinmux_P1_12_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d1.spi0_d1 */ + P1_12_gpio_pin: pinmux_P1_12_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P1_12_gpio_pu_pin: pinmux_P1_12_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P1_12_gpio_pd_pin: pinmux_P1_12_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P1_12_gpio_input_pin: pinmux_P1_12_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_INPUT | MUX_MODE7) >; }; /* spi0_d1.gpio0_4 */ + P1_12_spi_pin: pinmux_P1_12_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* spi0_d1.spi0_d1 */ + P1_12_i2c_pin: pinmux_P1_12_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* spi0_d1.i2c1_sda */ + P1_12_pwm_pin: pinmux_P1_12_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* spi0_d1.ehrpwm0_tripzone_input */ + P1_12_pru_uart_pin: pinmux_P1_12_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* spi0_d1.pr1_uart0_rxd */ + + /* P1_13 (ZCZ ball P17) USB1-ID */ + + /* P1_14 VOUT-3.3V */ + + /* P1_15 GND */ + + /* P1_16 GND */ + + /* P1_17 (ZCZ ball A9) VREFN */ + + /* P1_18 (ZCZ ball B9) VREFP */ + + /* P1_19 (ZCZ ball B6) AIN0 */ + + /* P1_20 (ZCZ ball D14) gpio0_20 */ + P1_20_default_pin: pinmux_P1_20_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P1_20_gpio_pin: pinmux_P1_20_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P1_20_gpio_pu_pin: pinmux_P1_20_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P1_20_gpio_pd_pin: pinmux_P1_20_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P1_20_gpio_input_pin: pinmux_P1_20_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE7) >; }; /* xdma_event_intr1.gpio0_20 */ + P1_20_pruin_pin: pinmux_P1_20_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE5) >; }; /* xdma_event_intr1.pru0_in16 */ + + /* P1_21 (ZCZ ball C7) AIN1 */ + + /* P1_22 GND */ + + /* P1_23 (ZCZ ball B7) AIN2 */ + + /* P1_24 VOUT-5V */ + + /* P1_25 (ZCZ ball A7) AIN3 */ + + /* P1_26 (ZCZ ball D18) i2c2_sda */ + P1_26_default_pin: pinmux_P1_26_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */ + P1_26_gpio_pin: pinmux_P1_26_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P1_26_gpio_pu_pin: pinmux_P1_26_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P1_26_gpio_pd_pin: pinmux_P1_26_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P1_26_gpio_input_pin: pinmux_P1_26_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_INPUT | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */ + P1_26_can_pin: pinmux_P1_26_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart1_ctsn.dcan0_tx */ + P1_26_i2c_pin: pinmux_P1_26_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */ + P1_26_spi_cs_pin: pinmux_P1_26_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_ctsn.spi1_cs0 */ + P1_26_pru_uart_pin: pinmux_P1_26_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_ctsn.pr1_uart0_cts_n */ + + /* P1_27 (ZCZ ball C8) AIN4 */ + + /* P1_28 (ZCZ ball D17) i2c2_scl */ + P1_28_default_pin: pinmux_P1_28_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */ + P1_28_gpio_pin: pinmux_P1_28_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P1_28_gpio_pu_pin: pinmux_P1_28_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P1_28_gpio_pd_pin: pinmux_P1_28_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P1_28_gpio_input_pin: pinmux_P1_28_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_INPUT | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */ + P1_28_can_pin: pinmux_P1_28_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart1_rtsn.dcan0_rx */ + P1_28_i2c_pin: pinmux_P1_28_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */ + P1_28_spi_cs_pin: pinmux_P1_28_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_rtsn.spi1_cs1 */ + P1_28_pru_uart_pin: pinmux_P1_28_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_rtsn.pr1_uart0_rts_n */ + + /* P1_29 (ZCZ ball A14) pru0_in7 */ + P1_29_default_pin: pinmux_P1_29_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkx.pru0_in7 */ + P1_29_gpio_pin: pinmux_P1_29_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P1_29_gpio_pu_pin: pinmux_P1_29_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P1_29_gpio_pd_pin: pinmux_P1_29_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P1_29_gpio_input_pin: pinmux_P1_29_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_ahclkx.gpio3_21 */ + P1_29_qep_pin: pinmux_P1_29_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_ahclkx.eqep0_strobe */ + P1_29_pruout_pin: pinmux_P1_29_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_ahclkx.pru0_out7 */ + P1_29_pruin_pin: pinmux_P1_29_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkx.pru0_in7 */ + + /* P1_30 (ZCZ ball E16) uart0_txd */ + P1_30_default_pin: pinmux_P1_30_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart0_txd.uart0_txd */ + P1_30_gpio_pin: pinmux_P1_30_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart0_txd.gpio1_11 */ + P1_30_gpio_pu_pin: pinmux_P1_30_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart0_txd.gpio1_11 */ + P1_30_gpio_pd_pin: pinmux_P1_30_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart0_txd.gpio1_11 */ + P1_30_gpio_input_pin: pinmux_P1_30_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_INPUT | MUX_MODE7) >; }; /* uart0_txd.gpio1_11 */ + P1_30_uart_pin: pinmux_P1_30_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart0_txd.uart0_txd */ + P1_30_spi_cs_pin: pinmux_P1_30_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart0_txd.spi1_cs1 */ + P1_30_can_pin: pinmux_P1_30_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart0_txd.dcan0_rx */ + P1_30_i2c_pin: pinmux_P1_30_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart0_txd.i2c2_scl */ + P1_30_pruout_pin: pinmux_P1_30_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* uart0_txd.pru1_out15 */ + P1_30_pruin_pin: pinmux_P1_30_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0974, PIN_INPUT | MUX_MODE6) >; }; /* uart0_txd.pru1_in15 */ + + /* P1_31 (ZCZ ball B12) pru0_in4 */ + P1_31_default_pin: pinmux_P1_31_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkr.pru0_in4 */ + P1_31_gpio_pin: pinmux_P1_31_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P1_31_gpio_pu_pin: pinmux_P1_31_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P1_31_gpio_pd_pin: pinmux_P1_31_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P1_31_gpio_input_pin: pinmux_P1_31_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_aclkr.gpio3_18 */ + P1_31_qep_pin: pinmux_P1_31_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkr.eqep0a_in */ + P1_31_pruout_pin: pinmux_P1_31_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_aclkr.pru0_out4 */ + P1_31_pruin_pin: pinmux_P1_31_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkr.pru0_in4 */ + + /* P1_32 (ZCZ ball E15) uart0_rxd */ + P1_32_default_pin: pinmux_P1_32_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart0_rxd.uart0_rxd */ + P1_32_gpio_pin: pinmux_P1_32_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart0_rxd.gpio1_10 */ + P1_32_gpio_pu_pin: pinmux_P1_32_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart0_rxd.gpio1_10 */ + P1_32_gpio_pd_pin: pinmux_P1_32_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart0_rxd.gpio1_10 */ + P1_32_gpio_input_pin: pinmux_P1_32_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_INPUT | MUX_MODE7) >; }; /* uart0_rxd.gpio1_10 */ + P1_32_uart_pin: pinmux_P1_32_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart0_rxd.uart0_rxd */ + P1_32_spi_cs_pin: pinmux_P1_32_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart0_rxd.spi1_cs0 */ + P1_32_can_pin: pinmux_P1_32_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart0_rxd.dcan0_tx */ + P1_32_i2c_pin: pinmux_P1_32_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart0_rxd.i2c2_sda */ + P1_32_pruout_pin: pinmux_P1_32_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* uart0_rxd.pru1_out14 */ + P1_32_pruin_pin: pinmux_P1_32_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0970, PIN_INPUT | MUX_MODE6) >; }; /* uart0_rxd.pru1_in14 */ + + /* P1_33 (ZCZ ball B13) pru0_in1 */ + P1_33_default_pin: pinmux_P1_33_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsx.pru0_in1 */ + P1_33_gpio_pin: pinmux_P1_33_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P1_33_gpio_pu_pin: pinmux_P1_33_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P1_33_gpio_pd_pin: pinmux_P1_33_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P1_33_gpio_input_pin: pinmux_P1_33_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_fsx.gpio3_15 */ + P1_33_pwm_pin: pinmux_P1_33_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_fsx.ehrpwm0b */ + P1_33_spi_pin: pinmux_P1_33_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_fsx.spi1_d0 */ + P1_33_pruout_pin: pinmux_P1_33_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_fsx.pru0_out1 */ + P1_33_pruin_pin: pinmux_P1_33_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsx.pru0_in1 */ + + /* P1_34 (ZCZ ball T11) gpio0_26 */ + P1_34_default_pin: pinmux_P1_34_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P1_34_gpio_pin: pinmux_P1_34_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P1_34_gpio_pu_pin: pinmux_P1_34_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P1_34_gpio_pd_pin: pinmux_P1_34_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P1_34_gpio_input_pin: pinmux_P1_34_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad10.gpio0_26 */ + P1_34_pwm_pin: pinmux_P1_34_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad10.ehrpwm2_tripzone_input */ + + /* P1_35 (ZCZ ball V5) pru1_in10 */ + P1_35_default_pin: pinmux_P1_35_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_pclk.pru1_in10 */ + P1_35_gpio_pin: pinmux_P1_35_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P1_35_gpio_pu_pin: pinmux_P1_35_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P1_35_gpio_pd_pin: pinmux_P1_35_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P1_35_gpio_input_pin: pinmux_P1_35_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE7) >; }; /* lcd_pclk.gpio2_24 */ + P1_35_pruout_pin: pinmux_P1_35_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_pclk.pru1_out10 */ + P1_35_pruin_pin: pinmux_P1_35_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE6) >; }; /* lcd_pclk.pru1_in10 */ + + /* P1_36 (ZCZ ball A13) ehrpwm0a */ + P1_36_default_pin: pinmux_P1_36_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkx.ehrpwm0a */ + P1_36_gpio_pin: pinmux_P1_36_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P1_36_gpio_pu_pin: pinmux_P1_36_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P1_36_gpio_pd_pin: pinmux_P1_36_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P1_36_gpio_input_pin: pinmux_P1_36_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_aclkx.gpio3_14 */ + P1_36_pwm_pin: pinmux_P1_36_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_aclkx.ehrpwm0a */ + P1_36_spi_sclk_pin: pinmux_P1_36_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_aclkx.spi1_sclk */ + P1_36_pruout_pin: pinmux_P1_36_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_aclkx.pru0_out0 */ + P1_36_pruin_pin: pinmux_P1_36_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_aclkx.pru0_in0 */ + + + /************************/ + /* P2 Header */ + /************************/ + + /* P2_01 (ZCZ ball U14) ehrpwm1a */ + P2_01_default_pin: pinmux_P2_01_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a2.ehrpwm1a */ + P2_01_gpio_pin: pinmux_P2_01_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P2_01_gpio_pu_pin: pinmux_P2_01_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P2_01_gpio_pd_pin: pinmux_P2_01_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P2_01_gpio_input_pin: pinmux_P2_01_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a2.gpio1_18 */ + P2_01_pwm_pin: pinmux_P2_01_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a2.ehrpwm1a */ + + /* P2_02 (ZCZ ball V17) gpio1_27 */ + P2_02_default_pin: pinmux_P2_02_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x086c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a11.gpio1_27 */ + P2_02_gpio_pin: pinmux_P2_02_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x086c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a11.gpio1_27 */ + P2_02_gpio_pu_pin: pinmux_P2_02_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x086c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a11.gpio1_27 */ + P2_02_gpio_pd_pin: pinmux_P2_02_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x086c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a11.gpio1_27 */ + P2_02_gpio_input_pin: pinmux_P2_02_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x086c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a11.gpio1_27 */ + + /* P2_03 (ZCZ ball T10) gpio0_23 */ + P2_03_default_pin: pinmux_P2_03_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P2_03_gpio_pin: pinmux_P2_03_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P2_03_gpio_pu_pin: pinmux_P2_03_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P2_03_gpio_pd_pin: pinmux_P2_03_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P2_03_gpio_input_pin: pinmux_P2_03_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad9.gpio0_23 */ + P2_03_pwm_pin: pinmux_P2_03_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad9.ehrpwm2b */ + + /* P2_04 (ZCZ ball T16) gpio1_26 */ + P2_04_default_pin: pinmux_P2_04_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0868, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a10.gpio1_26 */ + P2_04_gpio_pin: pinmux_P2_04_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0868, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a10.gpio1_26 */ + P2_04_gpio_pu_pin: pinmux_P2_04_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0868, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a10.gpio1_26 */ + P2_04_gpio_pd_pin: pinmux_P2_04_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0868, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a10.gpio1_26 */ + P2_04_gpio_input_pin: pinmux_P2_04_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0868, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a10.gpio1_26 */ + + /* P2_05 (ZCZ ball T17) uart4_rxd */ + P2_05_default_pin: pinmux_P2_05_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wait0.uart4_rxd */ + P2_05_gpio_pin: pinmux_P2_05_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P2_05_gpio_pu_pin: pinmux_P2_05_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P2_05_gpio_pd_pin: pinmux_P2_05_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P2_05_gpio_input_pin: pinmux_P2_05_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wait0.gpio0_30 */ + P2_05_uart_pin: pinmux_P2_05_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wait0.uart4_rxd */ + + /* P2_06 (ZCZ ball U16) gpio1_25 */ + P2_06_default_pin: pinmux_P2_06_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0864, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a9.gpio1_25 */ + P2_06_gpio_pin: pinmux_P2_06_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0864, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a9.gpio1_25 */ + P2_06_gpio_pu_pin: pinmux_P2_06_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0864, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a9.gpio1_25 */ + P2_06_gpio_pd_pin: pinmux_P2_06_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0864, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a9.gpio1_25 */ + P2_06_gpio_input_pin: pinmux_P2_06_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0864, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a9.gpio1_25 */ + + /* P2_07 (ZCZ ball U17) uart4_txd */ + P2_07_default_pin: pinmux_P2_07_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wpn.uart4_txd */ + P2_07_gpio_pin: pinmux_P2_07_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P2_07_gpio_pu_pin: pinmux_P2_07_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P2_07_gpio_pd_pin: pinmux_P2_07_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P2_07_gpio_input_pin: pinmux_P2_07_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_wpn.gpio0_31 */ + P2_07_uart_pin: pinmux_P2_07_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_wpn.uart4_txd */ + + /* P2_08 (ZCZ ball U18) gpio1_28 */ + P2_08_default_pin: pinmux_P2_08_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P2_08_gpio_pin: pinmux_P2_08_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P2_08_gpio_pu_pin: pinmux_P2_08_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P2_08_gpio_pd_pin: pinmux_P2_08_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + P2_08_gpio_input_pin: pinmux_P2_08_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0878, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_be1n.gpio1_28 */ + + /* P2_09 (ZCZ ball D15) i2c1_scl */ + P2_09_default_pin: pinmux_P2_09_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_txd.i2c1_scl */ + P2_09_gpio_pin: pinmux_P2_09_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P2_09_gpio_pu_pin: pinmux_P2_09_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P2_09_gpio_pd_pin: pinmux_P2_09_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P2_09_gpio_input_pin: pinmux_P2_09_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE7) >; }; /* uart1_txd.gpio0_15 */ + P2_09_uart_pin: pinmux_P2_09_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart1_txd.uart1_txd */ + P2_09_can_pin: pinmux_P2_09_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart1_txd.dcan1_rx */ + P2_09_i2c_pin: pinmux_P2_09_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_txd.i2c1_scl */ + P2_09_pru_uart_pin: pinmux_P2_09_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_txd.pr1_uart0_txd */ + P2_09_pruin_pin: pinmux_P2_09_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE6) >; }; /* uart1_txd.pru0_in16 */ + + /* P2_10 (ZCZ ball R14) gpio1_20 */ + P2_10_default_pin: pinmux_P2_10_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0850, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a4.gpio1_20 */ + P2_10_gpio_pin: pinmux_P2_10_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0850, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a4.gpio1_20 */ + P2_10_gpio_pu_pin: pinmux_P2_10_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0850, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a4.gpio1_20 */ + P2_10_gpio_pd_pin: pinmux_P2_10_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0850, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_a4.gpio1_20 */ + P2_10_gpio_input_pin: pinmux_P2_10_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0850, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_a4.gpio1_20 */ + P2_10_qep_pin: pinmux_P2_10_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0850, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; }; /* gpmc_a4.eqep1a_in */ + + /* P2_11 (ZCZ ball D16) i2c1_sda */ + P2_11_default_pin: pinmux_P2_11_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rxd.i2c1_sda */ + P2_11_gpio_pin: pinmux_P2_11_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P2_11_gpio_pu_pin: pinmux_P2_11_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P2_11_gpio_pd_pin: pinmux_P2_11_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P2_11_gpio_input_pin: pinmux_P2_11_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE7) >; }; /* uart1_rxd.gpio0_14 */ + P2_11_uart_pin: pinmux_P2_11_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; }; /* uart1_rxd.uart1_rxd */ + P2_11_can_pin: pinmux_P2_11_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart1_rxd.dcan1_tx */ + P2_11_i2c_pin: pinmux_P2_11_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rxd.i2c1_sda */ + P2_11_pru_uart_pin: pinmux_P2_11_pru_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_rxd.pr1_uart0_rxd */ + P2_11_pruin_pin: pinmux_P2_11_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE6) >; }; /* uart1_rxd.pru1_in16 */ + + /* P2_12 POWER_BUTTON */ + + /* P2_13 VOUT-5V */ + + /* P2_14 BAT-VIN */ + + /* P2_15 GND */ + + /* P2_16 BAT-TEMP */ + + /* P2_17 (ZCZ ball V12) gpio2_1 */ + P2_17_default_pin: pinmux_P2_17_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P2_17_gpio_pin: pinmux_P2_17_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P2_17_gpio_pu_pin: pinmux_P2_17_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P2_17_gpio_pd_pin: pinmux_P2_17_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + P2_17_gpio_input_pin: pinmux_P2_17_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x088c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_clk.gpio2_1 */ + + /* P2_18 (ZCZ ball U13) gpio1_15 */ + P2_18_default_pin: pinmux_P2_18_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P2_18_gpio_pin: pinmux_P2_18_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P2_18_gpio_pu_pin: pinmux_P2_18_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P2_18_gpio_pd_pin: pinmux_P2_18_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P2_18_gpio_input_pin: pinmux_P2_18_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad15.gpio1_15 */ + P2_18_qep_pin: pinmux_P2_18_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad15.eqep2_strobe */ + P2_18_pru_ecap_pin: pinmux_P2_18_pru_ecap_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* gpmc_ad15.pr1_ecap0_ecap_capin_apwm_o */ + P2_18_pruin_pin: pinmux_P2_18_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_ad15.pru0_in15 */ + + /* P2_19 (ZCZ ball U12) gpio0_27 */ + P2_19_default_pin: pinmux_P2_19_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P2_19_gpio_pin: pinmux_P2_19_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P2_19_gpio_pu_pin: pinmux_P2_19_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P2_19_gpio_pd_pin: pinmux_P2_19_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P2_19_gpio_input_pin: pinmux_P2_19_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad11.gpio0_27 */ + P2_19_pwm_pin: pinmux_P2_19_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad11.ehrpwm0_synco */ + + /* P2_20 (ZCZ ball T13) gpio2_0 */ + P2_20_default_pin: pinmux_P2_20_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0888, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn3.gpio2_0 */ + P2_20_gpio_pin: pinmux_P2_20_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0888, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn3.gpio2_0 */ + P2_20_gpio_pu_pin: pinmux_P2_20_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0888, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn3.gpio2_0 */ + P2_20_gpio_pd_pin: pinmux_P2_20_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0888, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_csn3.gpio2_0 */ + P2_20_gpio_input_pin: pinmux_P2_20_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0888, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_csn3.gpio2_0 */ + + /* P2_21 GND */ + + /* P2_22 (ZCZ ball V13) gpio1_14 */ + P2_22_default_pin: pinmux_P2_22_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P2_22_gpio_pin: pinmux_P2_22_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P2_22_gpio_pu_pin: pinmux_P2_22_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P2_22_gpio_pd_pin: pinmux_P2_22_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P2_22_gpio_input_pin: pinmux_P2_22_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad14.gpio1_14 */ + P2_22_qep_pin: pinmux_P2_22_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad14.eqep2_index */ + P2_22_pruin_pin: pinmux_P2_22_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE6) >; }; /* gpmc_ad14.pru0_in14 */ + + /* P2_23 VOUT-3.3V */ + + /* P2_24 (ZCZ ball T12) gpio1_12 */ + P2_24_default_pin: pinmux_P2_24_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P2_24_gpio_pin: pinmux_P2_24_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P2_24_gpio_pu_pin: pinmux_P2_24_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P2_24_gpio_pd_pin: pinmux_P2_24_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P2_24_gpio_input_pin: pinmux_P2_24_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad12.gpio1_12 */ + P2_24_qep_pin: pinmux_P2_24_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad12.eqep2a_in */ + P2_24_pruout_pin: pinmux_P2_24_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_ad12.pru0_out14 */ + + /* P2_25 (ZCZ ball E17) spi1_d1 */ + P2_25_default_pin: pinmux_P2_25_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart0_rtsn.spi1_d1 */ + P2_25_gpio_pin: pinmux_P2_25_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart0_rtsn.gpio1_9 */ + P2_25_gpio_pu_pin: pinmux_P2_25_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart0_rtsn.gpio1_9 */ + P2_25_gpio_pd_pin: pinmux_P2_25_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart0_rtsn.gpio1_9 */ + P2_25_gpio_input_pin: pinmux_P2_25_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_INPUT | MUX_MODE7) >; }; /* uart0_rtsn.gpio1_9 */ + P2_25_uart_pin: pinmux_P2_25_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart0_rtsn.uart4_txd */ + P2_25_can_pin: pinmux_P2_25_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart0_rtsn.dcan1_rx */ + P2_25_i2c_pin: pinmux_P2_25_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart0_rtsn.i2c1_scl */ + P2_25_spi_pin: pinmux_P2_25_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart0_rtsn.spi1_d1 */ + P2_25_spi_cs_pin: pinmux_P2_25_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart0_rtsn.spi1_cs0 */ + + /* P2_26 RESET# */ + + /* P2_27 (ZCZ ball E18) spi1_d0 */ + P2_27_default_pin: pinmux_P2_27_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart0_ctsn.spi1_d0 */ + P2_27_gpio_pin: pinmux_P2_27_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart0_ctsn.gpio1_8 */ + P2_27_gpio_pu_pin: pinmux_P2_27_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart0_ctsn.gpio1_8 */ + P2_27_gpio_pd_pin: pinmux_P2_27_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart0_ctsn.gpio1_8 */ + P2_27_gpio_input_pin: pinmux_P2_27_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_INPUT | MUX_MODE7) >; }; /* uart0_ctsn.gpio1_8 */ + P2_27_uart_pin: pinmux_P2_27_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart0_ctsn.uart4_rxd */ + P2_27_can_pin: pinmux_P2_27_can_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart0_ctsn.dcan1_tx */ + P2_27_i2c_pin: pinmux_P2_27_i2c_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart0_ctsn.i2c1_sda */ + P2_27_spi_pin: pinmux_P2_27_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart0_ctsn.spi1_d0 */ + + /* P2_28 (ZCZ ball D13) pru0_in6 */ + P2_28_default_pin: pinmux_P2_28_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr1.pru0_in6 */ + P2_28_gpio_pin: pinmux_P2_28_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P2_28_gpio_pu_pin: pinmux_P2_28_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P2_28_gpio_pd_pin: pinmux_P2_28_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P2_28_gpio_input_pin: pinmux_P2_28_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_axr1.gpio3_20 */ + P2_28_qep_pin: pinmux_P2_28_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_axr1.eqep0_index */ + P2_28_pruout_pin: pinmux_P2_28_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_axr1.pru0_out6 */ + P2_28_pruin_pin: pinmux_P2_28_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr1.pru0_in6 */ + + /* P2_29 (ZCZ ball C18) spi1_sclk */ + P2_29_default_pin: pinmux_P2_29_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* eCAP0_in_PWM0_out.spi1_sclk */ + P2_29_gpio_pin: pinmux_P2_29_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P2_29_gpio_pu_pin: pinmux_P2_29_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P2_29_gpio_pd_pin: pinmux_P2_29_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P2_29_gpio_input_pin: pinmux_P2_29_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_INPUT | MUX_MODE7) >; }; /* eCAP0_in_PWM0_out.gpio0_7 */ + P2_29_pwm_pin: pinmux_P2_29_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE0) >; }; /* eCAP0_in_PWM0_out.ecap0_in_pwm0_out */ + P2_29_uart_pin: pinmux_P2_29_uart_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* eCAP0_in_PWM0_out.uart3_txd */ + P2_29_spi_cs_pin: pinmux_P2_29_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; }; /* eCAP0_in_PWM0_out.spi1_cs1 */ + P2_29_pru_ecap_pin: pinmux_P2_29_pru_ecap_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; }; /* eCAP0_in_PWM0_out.pr1_ecap0_ecap_capin_apwm_o */ + P2_29_spi_sclk_pin: pinmux_P2_29_spi_sclk_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* eCAP0_in_PWM0_out.spi1_sclk */ + + /* P2_30 (ZCZ ball C12) pru0_in3 */ + P2_30_default_pin: pinmux_P2_30_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkr.pru0_in3 */ + P2_30_gpio_pin: pinmux_P2_30_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P2_30_gpio_pu_pin: pinmux_P2_30_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P2_30_gpio_pd_pin: pinmux_P2_30_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P2_30_gpio_input_pin: pinmux_P2_30_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_ahclkr.gpio3_17 */ + P2_30_pwm_pin: pinmux_P2_30_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_ahclkr.ehrpwm0_synci */ + P2_30_spi_cs_pin: pinmux_P2_30_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_ahclkr.spi1_cs0 */ + P2_30_pruout_pin: pinmux_P2_30_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_ahclkr.pru0_out3 */ + P2_30_pruin_pin: pinmux_P2_30_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_ahclkr.pru0_in3 */ + + /* P2_31 (ZCZ ball A15) spi1_cs1 */ + P2_31_default_pin: pinmux_P2_31_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* xdma_event_intr0.spi1_cs1 */ + P2_31_gpio_pin: pinmux_P2_31_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr0.gpio0_19 */ + P2_31_gpio_pu_pin: pinmux_P2_31_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr0.gpio0_19 */ + P2_31_gpio_pd_pin: pinmux_P2_31_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* xdma_event_intr0.gpio0_19 */ + P2_31_gpio_input_pin: pinmux_P2_31_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_INPUT | MUX_MODE7) >; }; /* xdma_event_intr0.gpio0_19 */ + P2_31_spi_cs_pin: pinmux_P2_31_spi_cs_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* xdma_event_intr0.spi1_cs1 */ + P2_31_pruin_pin: pinmux_P2_31_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09b0, PIN_INPUT | MUX_MODE5) >; }; /* xdma_event_intr0.pru1_in16 */ + + /* P2_32 (ZCZ ball D12) pru0_in2 */ + P2_32_default_pin: pinmux_P2_32_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr0.pru0_in2 */ + P2_32_gpio_pin: pinmux_P2_32_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P2_32_gpio_pu_pin: pinmux_P2_32_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P2_32_gpio_pd_pin: pinmux_P2_32_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P2_32_gpio_input_pin: pinmux_P2_32_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_axr0.gpio3_16 */ + P2_32_pwm_pin: pinmux_P2_32_pwm_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_axr0.ehrpwm0_tripzone_input */ + P2_32_spi_pin: pinmux_P2_32_spi_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* mcasp0_axr0.spi1_d1 */ + P2_32_pruout_pin: pinmux_P2_32_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_axr0.pru0_out2 */ + P2_32_pruin_pin: pinmux_P2_32_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_axr0.pru0_in2 */ + + /* P2_33 (ZCZ ball R12) gpio1_13 */ + P2_33_default_pin: pinmux_P2_33_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P2_33_gpio_pin: pinmux_P2_33_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P2_33_gpio_pu_pin: pinmux_P2_33_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P2_33_gpio_pd_pin: pinmux_P2_33_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P2_33_gpio_input_pin: pinmux_P2_33_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_INPUT | MUX_MODE7) >; }; /* gpmc_ad13.gpio1_13 */ + P2_33_qep_pin: pinmux_P2_33_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* gpmc_ad13.eqep2b_in */ + P2_33_pruout_pin: pinmux_P2_33_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; }; /* gpmc_ad13.pru0_out15 */ + + /* P2_34 (ZCZ ball C13) pru0_in5 */ + P2_34_default_pin: pinmux_P2_34_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsr.pru0_in5 */ + P2_34_gpio_pin: pinmux_P2_34_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P2_34_gpio_pu_pin: pinmux_P2_34_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P2_34_gpio_pd_pin: pinmux_P2_34_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P2_34_gpio_input_pin: pinmux_P2_34_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE7) >; }; /* mcasp0_fsr.gpio3_19 */ + P2_34_qep_pin: pinmux_P2_34_qep_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* mcasp0_fsr.eqep0b_in */ + P2_34_pruout_pin: pinmux_P2_34_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* mcasp0_fsr.pru0_out5 */ + P2_34_pruin_pin: pinmux_P2_34_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE6) >; }; /* mcasp0_fsr.pru0_in5 */ + + /* P2_35 (ZCZ ball U5) gpio2_22 */ + P2_35_default_pin: pinmux_P2_35_default_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P2_35_gpio_pin: pinmux_P2_35_gpio_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P2_35_gpio_pu_pin: pinmux_P2_35_gpio_pu_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P2_35_gpio_pd_pin: pinmux_P2_35_gpio_pd_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P2_35_gpio_input_pin: pinmux_P2_35_gpio_input_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE7) >; }; /* lcd_vsync.gpio2_22 */ + P2_35_pruout_pin: pinmux_P2_35_pruout_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; }; /* lcd_vsync.pru1_out8 */ + P2_35_pruin_pin: pinmux_P2_35_pruin_pin { pinctrl-single,pins = < + AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE6) >; }; /* lcd_vsync.pru1_in8 */ + + /* P2_36 (ZCZ ball C9) AIN7 */ }; &epwmss0 { @@ -141,7 +967,8 @@ &ehrpwm0 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&ehrpwm0_pins>; + //pinctrl-0 = <&ehrpwm0_pins>; + pinctrl-0 = <>; }; &epwmss1 { @@ -151,7 +978,18 @@ &ehrpwm1 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&ehrpwm1_pins>; + //pinctrl-0 = <&ehrpwm1_pins>; + pinctrl-0 = <>; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; }; &i2c0 { @@ -161,9 +999,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <>; + + status = "okay"; + clock-frequency = <400000>; +}; + &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; +// pinctrl-0 = <&i2c2_pins>; + pinctrl-0 = <>; status = "okay"; clock-frequency = <400000>; @@ -194,14 +1041,30 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; + //pinctrl-0 = <&uart0_pins>; + pinctrl-0 = <>; + + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <>; status = "okay"; }; &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins>; + //pinctrl-0 = <&uart4_pins>; + pinctrl-0 = <>; status = "okay"; }; @@ -235,3 +1098,1092 @@ &cppi41dma { status = "okay"; }; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "spidev"; + symlink = "spi/0.0"; + reg = <0>; + spi-max-frequency = <24000000>; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "spidev"; + symlink = "spi/0.1"; + reg = <1>; + spi-max-frequency = <24000000>; + status = "disabled"; + }; +}; + +&spi1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "spidev"; + symlink = "spi/1.0"; + reg = <0>; + spi-max-frequency = <24000000>; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "spidev"; + symlink = "spi/1.1"; + reg = <1>; + spi-max-frequency = <24000000>; + }; +}; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&dcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&ocp { + /************************/ + /* P1 Header */ + /************************/ + + /* P1_01 VIN-AC */ + + /* P1_02 (ZCZ ball R5) gpio_input */ + P1_02_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P1_02_default_pin>; + pinctrl-1 = <&P1_02_gpio_pin>; + pinctrl-2 = <&P1_02_gpio_pu_pin>; + pinctrl-3 = <&P1_02_gpio_pd_pin>; + pinctrl-4 = <&P1_02_gpio_input_pin>; + pinctrl-5 = <&P1_02_pruout_pin>; + pinctrl-6 = <&P1_02_pruin_pin>; + }; + + /* P1_03 (ZCZ ball F15) usb1_vbus_out */ + + /* P1_04 (ZCZ ball R6) */ + P1_04_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P1_04_default_pin>; + pinctrl-1 = <&P1_04_gpio_pin>; + pinctrl-2 = <&P1_04_gpio_pu_pin>; + pinctrl-3 = <&P1_04_gpio_pd_pin>; + pinctrl-4 = <&P1_04_gpio_input_pin>; + pinctrl-5 = <&P1_04_pruout_pin>; + pinctrl-6 = <&P1_04_pruin_pin>; + }; + + /* P1_05 (ZCZ ball T18) usb1_vbus_in */ + + /* P1_06 (ZCZ ball A16) spi_cs */ + P1_06_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P1_06_default_pin>; + pinctrl-1 = <&P1_06_gpio_pin>; + pinctrl-2 = <&P1_06_gpio_pu_pin>; + pinctrl-3 = <&P1_06_gpio_pd_pin>; + pinctrl-4 = <&P1_06_gpio_input_pin>; + pinctrl-5 = <&P1_06_spi_cs_pin>; + pinctrl-6 = <&P1_06_i2c_pin>; + pinctrl-7 = <&P1_06_pwm_pin>; + pinctrl-8 = <&P1_06_pru_uart_pin>; + }; + + /* P1_07 VIN-USB */ + + /* P1_08 (ZCZ ball A17) spi_sclk */ + P1_08_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "uart", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P1_08_default_pin>; + pinctrl-1 = <&P1_08_gpio_pin>; + pinctrl-2 = <&P1_08_gpio_pu_pin>; + pinctrl-3 = <&P1_08_gpio_pd_pin>; + pinctrl-4 = <&P1_08_gpio_input_pin>; + pinctrl-5 = <&P1_08_spi_sclk_pin>; + pinctrl-6 = <&P1_08_uart_pin>; + pinctrl-7 = <&P1_08_i2c_pin>; + pinctrl-8 = <&P1_08_pwm_pin>; + pinctrl-9 = <&P1_08_pru_uart_pin>; + }; + + /* P1_09 (ZCZ ball R18) USB1-DN */ + + /* P1_10 (ZCZ ball B17) spi */ + P1_10_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "uart", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P1_10_default_pin>; + pinctrl-1 = <&P1_10_gpio_pin>; + pinctrl-2 = <&P1_10_gpio_pu_pin>; + pinctrl-3 = <&P1_10_gpio_pd_pin>; + pinctrl-4 = <&P1_10_gpio_input_pin>; + pinctrl-5 = <&P1_10_spi_pin>; + pinctrl-6 = <&P1_10_uart_pin>; + pinctrl-7 = <&P1_10_i2c_pin>; + pinctrl-8 = <&P1_10_pwm_pin>; + pinctrl-9 = <&P1_10_pru_uart_pin>; + }; + + /* P1_11 (ZCZ ball R17) USB1-DP */ + + /* P1_12 (ZCZ ball B16) spi */ + P1_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "i2c", "pwm", "pru_uart"; + pinctrl-0 = <&P1_12_default_pin>; + pinctrl-1 = <&P1_12_gpio_pin>; + pinctrl-2 = <&P1_12_gpio_pu_pin>; + pinctrl-3 = <&P1_12_gpio_pd_pin>; + pinctrl-4 = <&P1_12_gpio_input_pin>; + pinctrl-5 = <&P1_12_spi_pin>; + pinctrl-6 = <&P1_12_i2c_pin>; + pinctrl-7 = <&P1_12_pwm_pin>; + pinctrl-8 = <&P1_12_pru_uart_pin>; + }; + + /* P1_13 (ZCZ ball P17) USB1-ID */ + + /* P1_14 VOUT-3.3V */ + + /* P1_15 GND */ + + /* P1_16 GND */ + + /* P1_17 (ZCZ ball A9) VREFN */ + + /* P1_18 (ZCZ ball B9) VREFP */ + + /* P1_19 (ZCZ ball B6) AIN0 */ + + /* P1_20 (ZCZ ball D14) */ + P1_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruin"; + pinctrl-0 = <&P1_20_default_pin>; + pinctrl-1 = <&P1_20_gpio_pin>; + pinctrl-2 = <&P1_20_gpio_pu_pin>; + pinctrl-3 = <&P1_20_gpio_pd_pin>; + pinctrl-4 = <&P1_20_gpio_input_pin>; + pinctrl-5 = <&P1_20_pruin_pin>; + }; + + /* P1_21 (ZCZ ball C7) AIN1 */ + + /* P1_22 GND */ + + /* P1_23 (ZCZ ball B7) AIN2 */ + + /* P1_24 VOUT-5V */ + + /* P1_25 (ZCZ ball A7) AIN3 */ + + /* P1_26 (ZCZ ball D18) i2c */ + P1_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart"; + pinctrl-0 = <&P1_26_default_pin>; + pinctrl-1 = <&P1_26_gpio_pin>; + pinctrl-2 = <&P1_26_gpio_pu_pin>; + pinctrl-3 = <&P1_26_gpio_pd_pin>; + pinctrl-4 = <&P1_26_gpio_input_pin>; + pinctrl-5 = <&P1_26_spi_cs_pin>; + pinctrl-6 = <&P1_26_can_pin>; + pinctrl-7 = <&P1_26_i2c_pin>; + pinctrl-8 = <&P1_26_pru_uart_pin>; + }; + + /* P1_27 (ZCZ ball C8) AIN4 */ + + /* P1_28 (ZCZ ball D17) i2c */ + P1_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart"; + pinctrl-0 = <&P1_28_default_pin>; + pinctrl-1 = <&P1_28_gpio_pin>; + pinctrl-2 = <&P1_28_gpio_pu_pin>; + pinctrl-3 = <&P1_28_gpio_pd_pin>; + pinctrl-4 = <&P1_28_gpio_input_pin>; + pinctrl-5 = <&P1_28_spi_cs_pin>; + pinctrl-6 = <&P1_28_can_pin>; + pinctrl-7 = <&P1_28_i2c_pin>; + pinctrl-8 = <&P1_28_pru_uart_pin>; + }; + + /* P1_29 (ZCZ ball A14) pruin */ + P1_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P1_29_default_pin>; + pinctrl-1 = <&P1_29_gpio_pin>; + pinctrl-2 = <&P1_29_gpio_pu_pin>; + pinctrl-3 = <&P1_29_gpio_pd_pin>; + pinctrl-4 = <&P1_29_gpio_input_pin>; + pinctrl-5 = <&P1_29_qep_pin>; + pinctrl-6 = <&P1_29_pruout_pin>; + pinctrl-7 = <&P1_29_pruin_pin>; + }; + + /* P1_30 (ZCZ ball E16) uart */ + P1_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "uart", "can", "i2c", "pruout", "pruin"; + pinctrl-0 = <&P1_30_default_pin>; + pinctrl-1 = <&P1_30_gpio_pin>; + pinctrl-2 = <&P1_30_gpio_pu_pin>; + pinctrl-3 = <&P1_30_gpio_pd_pin>; + pinctrl-4 = <&P1_30_gpio_input_pin>; + pinctrl-5 = <&P1_30_spi_cs_pin>; + pinctrl-6 = <&P1_30_uart_pin>; + pinctrl-7 = <&P1_30_can_pin>; + pinctrl-8 = <&P1_30_i2c_pin>; + pinctrl-9 = <&P1_30_pruout_pin>; + pinctrl-10 = <&P1_30_pruin_pin>; + }; + + /* P1_31 (ZCZ ball B12) pruin */ + P1_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P1_31_default_pin>; + pinctrl-1 = <&P1_31_gpio_pin>; + pinctrl-2 = <&P1_31_gpio_pu_pin>; + pinctrl-3 = <&P1_31_gpio_pd_pin>; + pinctrl-4 = <&P1_31_gpio_input_pin>; + pinctrl-5 = <&P1_31_qep_pin>; + pinctrl-6 = <&P1_31_pruout_pin>; + pinctrl-7 = <&P1_31_pruin_pin>; + }; + + /* P1_32 (ZCZ ball E15) uart */ + P1_32_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "uart", "can", "i2c", "pruout", "pruin"; + pinctrl-0 = <&P1_32_default_pin>; + pinctrl-1 = <&P1_32_gpio_pin>; + pinctrl-2 = <&P1_32_gpio_pu_pin>; + pinctrl-3 = <&P1_32_gpio_pd_pin>; + pinctrl-4 = <&P1_32_gpio_input_pin>; + pinctrl-5 = <&P1_32_spi_cs_pin>; + pinctrl-6 = <&P1_32_uart_pin>; + pinctrl-7 = <&P1_32_can_pin>; + pinctrl-8 = <&P1_32_i2c_pin>; + pinctrl-9 = <&P1_32_pruout_pin>; + pinctrl-10 = <&P1_32_pruin_pin>; + }; + + /* P1_33 (ZCZ ball B13) pruin */ + P1_33_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P1_33_default_pin>; + pinctrl-1 = <&P1_33_gpio_pin>; + pinctrl-2 = <&P1_33_gpio_pu_pin>; + pinctrl-3 = <&P1_33_gpio_pd_pin>; + pinctrl-4 = <&P1_33_gpio_input_pin>; + pinctrl-5 = <&P1_33_spi_pin>; + pinctrl-6 = <&P1_33_pwm_pin>; + pinctrl-7 = <&P1_33_pruout_pin>; + pinctrl-8 = <&P1_33_pruin_pin>; + }; + + /* P1_34 (ZCZ ball T11) */ + P1_34_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P1_34_default_pin>; + pinctrl-1 = <&P1_34_gpio_pin>; + pinctrl-2 = <&P1_34_gpio_pu_pin>; + pinctrl-3 = <&P1_34_gpio_pd_pin>; + pinctrl-4 = <&P1_34_gpio_input_pin>; + pinctrl-5 = <&P1_34_pwm_pin>; + }; + + /* P1_35 (ZCZ ball V5) pruin */ + P1_35_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P1_35_default_pin>; + pinctrl-1 = <&P1_35_gpio_pin>; + pinctrl-2 = <&P1_35_gpio_pu_pin>; + pinctrl-3 = <&P1_35_gpio_pd_pin>; + pinctrl-4 = <&P1_35_gpio_input_pin>; + pinctrl-5 = <&P1_35_pruout_pin>; + pinctrl-6 = <&P1_35_pruin_pin>; + }; + + /* P1_36 (ZCZ ball A13) pwm */ + P1_36_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P1_36_default_pin>; + pinctrl-1 = <&P1_36_gpio_pin>; + pinctrl-2 = <&P1_36_gpio_pu_pin>; + pinctrl-3 = <&P1_36_gpio_pd_pin>; + pinctrl-4 = <&P1_36_gpio_input_pin>; + pinctrl-5 = <&P1_36_spi_sclk_pin>; + pinctrl-6 = <&P1_36_pwm_pin>; + pinctrl-7 = <&P1_36_pruout_pin>; + pinctrl-8 = <&P1_36_pruin_pin>; + }; + + + /************************/ + /* P2 Header */ + /************************/ + + /* P2_01 (ZCZ ball U14) pwm */ + P2_01_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P2_01_default_pin>; + pinctrl-1 = <&P2_01_gpio_pin>; + pinctrl-2 = <&P2_01_gpio_pu_pin>; + pinctrl-3 = <&P2_01_gpio_pd_pin>; + pinctrl-4 = <&P2_01_gpio_input_pin>; + pinctrl-5 = <&P2_01_pwm_pin>; + }; + + /* P2_02 (ZCZ ball V17) */ + P2_02_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P2_02_default_pin>; + pinctrl-1 = <&P2_02_gpio_pin>; + pinctrl-2 = <&P2_02_gpio_pu_pin>; + pinctrl-3 = <&P2_02_gpio_pd_pin>; + pinctrl-4 = <&P2_02_gpio_input_pin>; + }; + + /* P2_03 (ZCZ ball T10) */ + P2_03_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P2_03_default_pin>; + pinctrl-1 = <&P2_03_gpio_pin>; + pinctrl-2 = <&P2_03_gpio_pu_pin>; + pinctrl-3 = <&P2_03_gpio_pd_pin>; + pinctrl-4 = <&P2_03_gpio_input_pin>; + pinctrl-5 = <&P2_03_pwm_pin>; + }; + + /* P2_04 (ZCZ ball T16) */ + P2_04_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P2_04_default_pin>; + pinctrl-1 = <&P2_04_gpio_pin>; + pinctrl-2 = <&P2_04_gpio_pu_pin>; + pinctrl-3 = <&P2_04_gpio_pd_pin>; + pinctrl-4 = <&P2_04_gpio_input_pin>; + }; + + /* P2_05 (ZCZ ball T17) uart */ + P2_05_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart"; + pinctrl-0 = <&P2_05_default_pin>; + pinctrl-1 = <&P2_05_gpio_pin>; + pinctrl-2 = <&P2_05_gpio_pu_pin>; + pinctrl-3 = <&P2_05_gpio_pd_pin>; + pinctrl-4 = <&P2_05_gpio_input_pin>; + pinctrl-5 = <&P2_05_uart_pin>; + }; + + /* P2_06 (ZCZ ball U16) */ + P2_06_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P2_06_default_pin>; + pinctrl-1 = <&P2_06_gpio_pin>; + pinctrl-2 = <&P2_06_gpio_pu_pin>; + pinctrl-3 = <&P2_06_gpio_pd_pin>; + pinctrl-4 = <&P2_06_gpio_input_pin>; + }; + + /* P2_07 (ZCZ ball U17) uart */ + P2_07_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart"; + pinctrl-0 = <&P2_07_default_pin>; + pinctrl-1 = <&P2_07_gpio_pin>; + pinctrl-2 = <&P2_07_gpio_pu_pin>; + pinctrl-3 = <&P2_07_gpio_pd_pin>; + pinctrl-4 = <&P2_07_gpio_input_pin>; + pinctrl-5 = <&P2_07_uart_pin>; + }; + + /* P2_08 (ZCZ ball U18) */ + P2_08_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P2_08_default_pin>; + pinctrl-1 = <&P2_08_gpio_pin>; + pinctrl-2 = <&P2_08_gpio_pu_pin>; + pinctrl-3 = <&P2_08_gpio_pd_pin>; + pinctrl-4 = <&P2_08_gpio_input_pin>; + }; + + /* P2_09 (ZCZ ball D15) i2c */ + P2_09_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin"; + pinctrl-0 = <&P2_09_default_pin>; + pinctrl-1 = <&P2_09_gpio_pin>; + pinctrl-2 = <&P2_09_gpio_pu_pin>; + pinctrl-3 = <&P2_09_gpio_pd_pin>; + pinctrl-4 = <&P2_09_gpio_input_pin>; + pinctrl-5 = <&P2_09_uart_pin>; + pinctrl-6 = <&P2_09_can_pin>; + pinctrl-7 = <&P2_09_i2c_pin>; + pinctrl-8 = <&P2_09_pru_uart_pin>; + pinctrl-9 = <&P2_09_pruin_pin>; + }; + + /* P2_10 (ZCZ ball R14) */ + P2_10_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep"; + pinctrl-0 = <&P2_10_default_pin>; + pinctrl-1 = <&P2_10_gpio_pin>; + pinctrl-2 = <&P2_10_gpio_pu_pin>; + pinctrl-3 = <&P2_10_gpio_pd_pin>; + pinctrl-4 = <&P2_10_gpio_input_pin>; + pinctrl-5 = <&P2_10_qep_pin>; + }; + + /* P2_11 (ZCZ ball D16) i2c */ + P2_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin"; + pinctrl-0 = <&P2_11_default_pin>; + pinctrl-1 = <&P2_11_gpio_pin>; + pinctrl-2 = <&P2_11_gpio_pu_pin>; + pinctrl-3 = <&P2_11_gpio_pd_pin>; + pinctrl-4 = <&P2_11_gpio_input_pin>; + pinctrl-5 = <&P2_11_uart_pin>; + pinctrl-6 = <&P2_11_can_pin>; + pinctrl-7 = <&P2_11_i2c_pin>; + pinctrl-8 = <&P2_11_pru_uart_pin>; + pinctrl-9 = <&P2_11_pruin_pin>; + }; + + /* P2_12 POWER_BUTTON */ + + /* P2_13 VOUT-5V */ + + /* P2_14 BAT-VIN */ + + /* P2_15 GND */ + + /* P2_16 BAT-TEMP */ + + /* P2_17 (ZCZ ball V12) */ + P2_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P2_17_default_pin>; + pinctrl-1 = <&P2_17_gpio_pin>; + pinctrl-2 = <&P2_17_gpio_pu_pin>; + pinctrl-3 = <&P2_17_gpio_pd_pin>; + pinctrl-4 = <&P2_17_gpio_input_pin>; + }; + + /* P2_18 (ZCZ ball U13) */ + P2_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pru_ecap", "pruin"; + pinctrl-0 = <&P2_18_default_pin>; + pinctrl-1 = <&P2_18_gpio_pin>; + pinctrl-2 = <&P2_18_gpio_pu_pin>; + pinctrl-3 = <&P2_18_gpio_pd_pin>; + pinctrl-4 = <&P2_18_gpio_input_pin>; + pinctrl-5 = <&P2_18_qep_pin>; + pinctrl-6 = <&P2_18_pru_ecap_pin>; + pinctrl-7 = <&P2_18_pruin_pin>; + }; + + /* P2_19 (ZCZ ball U12) */ + P2_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm"; + pinctrl-0 = <&P2_19_default_pin>; + pinctrl-1 = <&P2_19_gpio_pin>; + pinctrl-2 = <&P2_19_gpio_pu_pin>; + pinctrl-3 = <&P2_19_gpio_pd_pin>; + pinctrl-4 = <&P2_19_gpio_input_pin>; + pinctrl-5 = <&P2_19_pwm_pin>; + }; + + /* P2_20 (ZCZ ball T13) */ + P2_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input"; + pinctrl-0 = <&P2_20_default_pin>; + pinctrl-1 = <&P2_20_gpio_pin>; + pinctrl-2 = <&P2_20_gpio_pu_pin>; + pinctrl-3 = <&P2_20_gpio_pd_pin>; + pinctrl-4 = <&P2_20_gpio_input_pin>; + }; + + /* P2_21 GND */ + + /* P2_22 (ZCZ ball V13) */ + P2_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruin"; + pinctrl-0 = <&P2_22_default_pin>; + pinctrl-1 = <&P2_22_gpio_pin>; + pinctrl-2 = <&P2_22_gpio_pu_pin>; + pinctrl-3 = <&P2_22_gpio_pd_pin>; + pinctrl-4 = <&P2_22_gpio_input_pin>; + pinctrl-5 = <&P2_22_qep_pin>; + pinctrl-6 = <&P2_22_pruin_pin>; + }; + + /* P2_23 VOUT-3.3V */ + + /* P2_24 (ZCZ ball T12) */ + P2_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout"; + pinctrl-0 = <&P2_24_default_pin>; + pinctrl-1 = <&P2_24_gpio_pin>; + pinctrl-2 = <&P2_24_gpio_pu_pin>; + pinctrl-3 = <&P2_24_gpio_pd_pin>; + pinctrl-4 = <&P2_24_gpio_input_pin>; + pinctrl-5 = <&P2_24_qep_pin>; + pinctrl-6 = <&P2_24_pruout_pin>; + }; + + /* P2_25 (ZCZ ball E17) spi */ + P2_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "spi_cs", "uart", "can", "i2c"; + pinctrl-0 = <&P2_25_default_pin>; + pinctrl-1 = <&P2_25_gpio_pin>; + pinctrl-2 = <&P2_25_gpio_pu_pin>; + pinctrl-3 = <&P2_25_gpio_pd_pin>; + pinctrl-4 = <&P2_25_gpio_input_pin>; + pinctrl-5 = <&P2_25_spi_pin>; + pinctrl-6 = <&P2_25_spi_cs_pin>; + pinctrl-7 = <&P2_25_uart_pin>; + pinctrl-8 = <&P2_25_can_pin>; + pinctrl-9 = <&P2_25_i2c_pin>; + }; + + /* P2_26 RESET# */ + + /* P2_27 (ZCZ ball E18) spi */ + P2_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "uart", "can", "i2c"; + pinctrl-0 = <&P2_27_default_pin>; + pinctrl-1 = <&P2_27_gpio_pin>; + pinctrl-2 = <&P2_27_gpio_pu_pin>; + pinctrl-3 = <&P2_27_gpio_pd_pin>; + pinctrl-4 = <&P2_27_gpio_input_pin>; + pinctrl-5 = <&P2_27_spi_pin>; + pinctrl-6 = <&P2_27_uart_pin>; + pinctrl-7 = <&P2_27_can_pin>; + pinctrl-8 = <&P2_27_i2c_pin>; + }; + + /* P2_28 (ZCZ ball D13) pruin */ + P2_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P2_28_default_pin>; + pinctrl-1 = <&P2_28_gpio_pin>; + pinctrl-2 = <&P2_28_gpio_pu_pin>; + pinctrl-3 = <&P2_28_gpio_pd_pin>; + pinctrl-4 = <&P2_28_gpio_input_pin>; + pinctrl-5 = <&P2_28_qep_pin>; + pinctrl-6 = <&P2_28_pruout_pin>; + pinctrl-7 = <&P2_28_pruin_pin>; + }; + + /* P2_29 (ZCZ ball C18) spi_sclk */ + P2_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "spi_sclk", "uart", "pwm", "pru_ecap"; + pinctrl-0 = <&P2_29_default_pin>; + pinctrl-1 = <&P2_29_gpio_pin>; + pinctrl-2 = <&P2_29_gpio_pu_pin>; + pinctrl-3 = <&P2_29_gpio_pd_pin>; + pinctrl-4 = <&P2_29_gpio_input_pin>; + pinctrl-5 = <&P2_29_spi_cs_pin>; + pinctrl-6 = <&P2_29_spi_sclk_pin>; + pinctrl-7 = <&P2_29_uart_pin>; + pinctrl-8 = <&P2_29_pwm_pin>; + pinctrl-9 = <&P2_29_pru_ecap_pin>; + }; + + /* P2_30 (ZCZ ball C12) pruin */ + P2_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P2_30_default_pin>; + pinctrl-1 = <&P2_30_gpio_pin>; + pinctrl-2 = <&P2_30_gpio_pu_pin>; + pinctrl-3 = <&P2_30_gpio_pd_pin>; + pinctrl-4 = <&P2_30_gpio_input_pin>; + pinctrl-5 = <&P2_30_spi_cs_pin>; + pinctrl-6 = <&P2_30_pwm_pin>; + pinctrl-7 = <&P2_30_pruout_pin>; + pinctrl-8 = <&P2_30_pruin_pin>; + }; + + /* P2_31 (ZCZ ball A15) spi_cs */ + P2_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "pruin"; + pinctrl-0 = <&P2_31_default_pin>; + pinctrl-1 = <&P2_31_gpio_pin>; + pinctrl-2 = <&P2_31_gpio_pu_pin>; + pinctrl-3 = <&P2_31_gpio_pd_pin>; + pinctrl-4 = <&P2_31_gpio_input_pin>; + pinctrl-5 = <&P2_31_spi_cs_pin>; + pinctrl-6 = <&P2_31_pruin_pin>; + }; + + /* P2_32 (ZCZ ball D12) pruin */ + P2_32_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin"; + pinctrl-0 = <&P2_32_default_pin>; + pinctrl-1 = <&P2_32_gpio_pin>; + pinctrl-2 = <&P2_32_gpio_pu_pin>; + pinctrl-3 = <&P2_32_gpio_pd_pin>; + pinctrl-4 = <&P2_32_gpio_input_pin>; + pinctrl-5 = <&P2_32_spi_pin>; + pinctrl-6 = <&P2_32_pwm_pin>; + pinctrl-7 = <&P2_32_pruout_pin>; + pinctrl-8 = <&P2_32_pruin_pin>; + }; + + /* P2_33 (ZCZ ball R12) */ + P2_33_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout"; + pinctrl-0 = <&P2_33_default_pin>; + pinctrl-1 = <&P2_33_gpio_pin>; + pinctrl-2 = <&P2_33_gpio_pu_pin>; + pinctrl-3 = <&P2_33_gpio_pd_pin>; + pinctrl-4 = <&P2_33_gpio_input_pin>; + pinctrl-5 = <&P2_33_qep_pin>; + pinctrl-6 = <&P2_33_pruout_pin>; + }; + + /* P2_34 (ZCZ ball C13) pruin */ + P2_34_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin"; + pinctrl-0 = <&P2_34_default_pin>; + pinctrl-1 = <&P2_34_gpio_pin>; + pinctrl-2 = <&P2_34_gpio_pu_pin>; + pinctrl-3 = <&P2_34_gpio_pd_pin>; + pinctrl-4 = <&P2_34_gpio_input_pin>; + pinctrl-5 = <&P2_34_qep_pin>; + pinctrl-6 = <&P2_34_pruout_pin>; + pinctrl-7 = <&P2_34_pruin_pin>; + }; + + /* P2_35 (ZCZ ball U5) gpio_input */ + P2_35_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin"; + pinctrl-0 = <&P2_35_default_pin>; + pinctrl-1 = <&P2_35_gpio_pin>; + pinctrl-2 = <&P2_35_gpio_pu_pin>; + pinctrl-3 = <&P2_35_gpio_pd_pin>; + pinctrl-4 = <&P2_35_gpio_input_pin>; + pinctrl-5 = <&P2_35_pruout_pin>; + pinctrl-6 = <&P2_35_pruin_pin>; + }; + + /* P2_36 (ZCZ ball C9) AIN7 */ + + cape-universal { + compatible = "gpio-of-helper"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + P1_02 { + gpio-name = "P1_02"; + gpio = <&gpio2 23 0>; + input; + dir-changeable; + }; + + P1_04 { + gpio-name = "P1_04"; + gpio = <&gpio2 25 0>; + input; + dir-changeable; + }; + + P1_06 { + gpio-name = "P1_06"; + gpio = <&gpio0 5 0>; + input; + dir-changeable; + }; + + P1_08 { + gpio-name = "P1_08"; + gpio = <&gpio0 2 0>; + input; + dir-changeable; + }; + + P1_10 { + gpio-name = "P1_10"; + gpio = <&gpio0 3 0>; + input; + dir-changeable; + }; + + P1_12 { + gpio-name = "P1_12"; + gpio = <&gpio0 4 0>; + input; + dir-changeable; + }; + + P1_20 { + gpio-name = "P1_20"; + gpio = <&gpio0 20 0>; + input; + dir-changeable; + }; + + P1_26 { + gpio-name = "P1_26"; + gpio = <&gpio0 12 0>; + input; + dir-changeable; + }; + + P1_28 { + gpio-name = "P1_28"; + gpio = <&gpio0 13 0>; + input; + dir-changeable; + }; + + P1_29 { + gpio-name = "P1_29"; + gpio = <&gpio3 21 0>; + input; + dir-changeable; + }; + + P1_30 { + gpio-name = "P1_30"; + gpio = <&gpio1 11 0>; + input; + dir-changeable; + }; + + P1_31 { + gpio-name = "P1_31"; + gpio = <&gpio3 18 0>; + input; + dir-changeable; + }; + + P1_32 { + gpio-name = "P1_32"; + gpio = <&gpio1 10 0>; + input; + dir-changeable; + }; + + P1_33 { + gpio-name = "P1_33"; + gpio = <&gpio3 15 0>; + input; + dir-changeable; + }; + + P1_34 { + gpio-name = "P1_34"; + gpio = <&gpio0 26 0>; + input; + dir-changeable; + }; + + P1_35 { + gpio-name = "P1_35"; + gpio = <&gpio2 24 0>; + input; + dir-changeable; + }; + + P1_36 { + gpio-name = "P1_36"; + gpio = <&gpio3 14 0>; + input; + dir-changeable; + }; + + P2_01 { + gpio-name = "P2_01"; + gpio = <&gpio1 18 0>; + input; + dir-changeable; + }; + + P2_02 { + gpio-name = "P2_02"; + gpio = <&gpio1 27 0>; + input; + dir-changeable; + }; + + P2_03 { + gpio-name = "P2_03"; + gpio = <&gpio0 23 0>; + input; + dir-changeable; + }; + + P2_04 { + gpio-name = "P2_04"; + gpio = <&gpio1 26 0>; + input; + dir-changeable; + }; + + P2_05 { + gpio-name = "P2_05"; + gpio = <&gpio0 30 0>; + input; + dir-changeable; + }; + + P2_06 { + gpio-name = "P2_06"; + gpio = <&gpio1 25 0>; + input; + dir-changeable; + }; + + P2_07 { + gpio-name = "P2_07"; + gpio = <&gpio0 31 0>; + input; + dir-changeable; + }; + + P2_08 { + gpio-name = "P2_08"; + gpio = <&gpio1 28 0>; + input; + dir-changeable; + }; + + P2_09 { + gpio-name = "P2_09"; + gpio = <&gpio0 15 0>; + input; + dir-changeable; + }; + + P2_10 { + gpio-name = "P2_10"; + gpio = <&gpio1 20 0>; + input; + dir-changeable; + }; + + P2_11 { + gpio-name = "P2_11"; + gpio = <&gpio0 14 0>; + input; + dir-changeable; + }; + + P2_17 { + gpio-name = "P2_17"; + gpio = <&gpio2 1 0>; + input; + dir-changeable; + }; + + P2_18 { + gpio-name = "P2_18"; + gpio = <&gpio1 15 0>; + input; + dir-changeable; + }; + + P2_19 { + gpio-name = "P2_19"; + gpio = <&gpio0 27 0>; + input; + dir-changeable; + }; + + P2_20 { + gpio-name = "P2_20"; + gpio = <&gpio2 0 0>; + input; + dir-changeable; + }; + + P2_22 { + gpio-name = "P2_22"; + gpio = <&gpio1 14 0>; + input; + dir-changeable; + }; + + P2_24 { + gpio-name = "P2_24"; + gpio = <&gpio1 12 0>; + input; + dir-changeable; + }; + + P2_25 { + gpio-name = "P2_25"; + gpio = <&gpio1 9 0>; + input; + dir-changeable; + }; + + P2_27 { + gpio-name = "P2_27"; + gpio = <&gpio1 8 0>; + input; + dir-changeable; + }; + + P2_28 { + gpio-name = "P2_28"; + gpio = <&gpio3 20 0>; + input; + dir-changeable; + }; + + P2_29 { + gpio-name = "P2_29"; + gpio = <&gpio0 7 0>; + input; + dir-changeable; + }; + + P2_30 { + gpio-name = "P2_30"; + gpio = <&gpio3 17 0>; + input; + dir-changeable; + }; + + P2_31 { + gpio-name = "P2_31"; + gpio = <&gpio0 19 0>; + input; + dir-changeable; + }; + + P2_32 { + gpio-name = "P2_32"; + gpio = <&gpio3 16 0>; + input; + dir-changeable; + }; + + P2_33 { + gpio-name = "P2_33"; + gpio = <&gpio1 13 0>; + input; + dir-changeable; + }; + + P2_34 { + gpio-name = "P2_34"; + gpio = <&gpio3 19 0>; + input; + dir-changeable; + }; + + P2_35 { + gpio-name = "P2_35"; + gpio = <&gpio2 22 0>; + input; + dir-changeable; + }; + + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index c19082f..7acc147 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -37,8 +37,8 @@ phy1 = &usb1_phy; ethernet0 = &cpsw_emac0; ethernet1 = &cpsw_emac1; - spi0 = &spi0; - spi1 = &spi1; + spi1 = &spi0; + spi2 = &spi1; }; cpus { @@ -159,7 +159,7 @@ * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ - ocp { + ocp: ocp { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -306,6 +306,39 @@ #interrupt-cells = <2>; reg = <0x44e07000 0x1000>; interrupts = <96>; + gpio-line-names = + "MDIO_DATA", // 0 + "MDIO_CLK", // 1 + "SPI0_SCLK", // 2 + "SPI0_D0", // 3 + "SPI0_D1", // 4 + "SPI0_CS0", // 5 + "SPI0_CS1", // 6 + "ECAP0_IN_PWM0_OUT", // 7 + "LCD_DATA12", // 8 + "LCD_DATA13", // 9 + "LCD_DATA14", // 10 + "LCD_DATA15", // 11 + "UART1_CTSN", // 12 + "UART1_RTSN", // 13 + "UART1_RXD", // 14 + "UART1_TXD", // 15 + "GMII1_TXD3", // 16 + "GMII1_TXD2", // 17 + "USB0_DRVVBUS", // 18 + "XDMA_EVENT_INTR0", // 19 + "XDMA_EVENT_INTR1", // 20 + "GMII1_TXD1", // 21 + "GPMC_AD8", // 22 + "GPMC_AD9", // 23 + "NC", // 24 + "NC", // 25 + "GPMC_AD10", // 26 + "GPMC_AD11", // 27 + "GMII1_TXD0", // 28 + "RMII1_REFCLK", // 29 + "GPMC_WAIT0", // 30 + "GPMC_WPN"; // 31 }; gpio1: gpio@4804c000 { @@ -317,6 +350,39 @@ #interrupt-cells = <2>; reg = <0x4804c000 0x1000>; interrupts = <98>; + gpio-line-names = + "GPMC_AD0", // 0 + "GPMC_AD1", // 1 + "GPMC_AD2", // 2 + "GPMC_AD3", // 3 + "GPMC_AD4", // 4 + "GPMC_AD5", // 5 + "GPMC_AD6", // 6 + "GPMC_AD7", // 7 + "UART0_CTSN", // 8 + "UART0_RTSN", // 9 + "UART0_RXD", // 10 + "UART0_TXD", // 11 + "GPMC_AD12", // 12 + "GPMC_AD13", // 13 + "GPMC_AD14", // 14 + "GPMC_AD15", // 15 + "GPMC_A0", // 16 + "GPMC_A1", // 17 + "GPMC_A2", // 18 + "GPMC_A3", // 19 + "GPMC_A4", // 20 + "GPMC_A5", // 21 + "GPMC_A6", // 22 + "GPMC_A7", // 23 + "GPMC_A8", // 24 + "GPMC_A9", // 25 + "GPMC_A10", // 26 + "GPMC_A11", // 27 + "GPMC_BE1N", // 28 + "GPMC_CSN0", // 29 + "GPMC_CSN1", // 30 + "GPMC_CSN2"; // 31 }; gpio2: gpio@481ac000 { @@ -328,6 +394,39 @@ #interrupt-cells = <2>; reg = <0x481ac000 0x1000>; interrupts = <32>; + gpio-line-names = + "GPMC_CSN3", // 0 + "GPMC_CLK", // 1 + "GPMC_ADVN_ALE", // 2 + "GPMC_OEN_REN", // 3 + "GPMC_WEN", // 4 + "GPMC_BE0N_CLE", // 5 + "LCD_DATA0", // 6 + "LCD_DATA1", // 7 + "LCD_DATA2", // 8 + "LCD_DATA3", // 9 + "LCD_DATA4", // 10 + "LCD_DATA5", // 11 + "LCD_DATA6", // 12 + "LCD_DATA7", // 13 + "LCD_DATA8", // 14 + "LCD_DATA9", // 15 + "LCD_DATA10", // 16 + "LCD_DATA11", // 17 + "GMII1_RXD3", // 18 + "GMII1_RXD2", // 19 + "GMII1_RXD1", // 20 + "GMII1_RXD0", // 21 + "LCD_VSYNC", // 22 + "LCD_HSYNC", // 23 + "LCD_PCLK", // 24 + "LCD_AC_BIAS_EN", // 25 + "MMC0_DAT3", // 26 + "MMC0_DAT2", // 27 + "MMC0_DAT1", // 28 + "MMC0_DAT0", // 29 + "MMC0_CLK", // 30 + "MMC0_CMD"; // 31 }; gpio3: gpio@481ae000 { @@ -339,6 +438,39 @@ #interrupt-cells = <2>; reg = <0x481ae000 0x1000>; interrupts = <62>; + gpio-line-names = + "GMII1_COL", // 0 + "GMII1_CRS", // 1 + "GMII1_RXER", // 2 + "GMII1_TXEN", // 3 + "GMII1_RXDV", // 4 + "I2C0_SDA", // 5 + "I2C0_SCL", // 6 + "EMU0", // 7 + "EMU1", // 8 + "GMII1_TXCLK", // 9 + "GMII1_RXCLK", // 10 + "NC", // 11 + "NC", // 12 + "USB1_DRVVBUS", // 13 + "MCASP0_ACLKX", // 14 + "MCASP0_FSX", // 15 + "MCASP0_AXR0", // 16 + "MCASP0_AHCLKR", // 17 + "MCASP0_ACLKR", // 18 + "MCASP0_FSR", // 19 + "MCASP0_AXR1", // 20 + "MCASP0_AHCLKX", // 21 + "NC", // 22 + "NC", // 23 + "NC", // 24 + "NC", // 25 + "NC", // 26 + "NC", // 27 + "NC", // 28 + "NC", // 29 + "NC", // 30 + "NC"; // 31 }; uart0: serial@44e09000 { @@ -770,6 +902,16 @@ status = "disabled"; }; + eqep0: eqep@0x48300180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48300180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupt-parent = <&intc>; + interrupts = <79>; + status = "disabled"; + }; + ehrpwm0: pwm@48300200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; @@ -804,6 +946,16 @@ status = "disabled"; }; + eqep1: eqep@0x48302180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48302180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupt-parent = <&intc>; + interrupts = <88>; + status = "disabled"; + }; + ehrpwm1: pwm@48302200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; @@ -838,6 +990,16 @@ status = "disabled"; }; + eqep2: eqep@0x48304180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48304180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupt-parent = <&intc>; + interrupts = <89>; + status = "disabled"; + }; + ehrpwm2: pwm@48304200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index ad95311..cefaa26 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -167,6 +167,10 @@ }; }; +&bb2d { + status = "okay"; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 2cb45dd..d33a1b7 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1028,6 +1028,16 @@ ti,hwmods = "dmm"; }; + bb2d: bb2d@59000000 { + compatible = "ti,dra7-bb2d","vivante,gc"; + reg = <0x59000000 0x0700>; + interrupts = ; + ti,hwmods = "bb2d"; + clocks = <&dpll_core_h24x2_ck>; + clock-names = "fclk"; + status = "disabled"; + }; + i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; diff --git b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts new file mode 100644 index 0000000..29b6b8e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts @@ -0,0 +1,302 @@ +/* + * Copyright (C) 2015 Robert Nelson (robertcnelson@gmail.com) + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include +#include "imx6q.dtsi" + +/ { + model = "Digi ConnectCore-i.MX6 SBC Board"; + compatible = "digi,connectcore/q", "fsl,imx6q"; + + chosen { + stdout-path = &uart4; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usbh1_reset: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usbh1_reset"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <17 0x8>; /* active-low GPIO0_17 */ + + regulators { + vdd_3v3_reg: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-ccimx6sbc { + pinctrl_hog: hoggrp { + fsl,pins = < + /* da9063*/ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + /* need to force low for hub reset */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x10b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x10b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_reset>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + broken-cd; /* cd & wp, is not wired up on this board */ + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index fcd257b..d32fa81 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -54,18 +54,6 @@ reg = <0x10000000 0x40000000>; }; - reg_usbh1_vbus: regulator-usbhubreset { - compatible = "regulator-fixed"; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - startup-delay-us = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1_hubreset>; - gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; - }; - reg_usb_otg_vbus: regulator-usbotgvbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; @@ -213,12 +201,18 @@ }; &usbh1 { - vbus-supply = <®_usbh1_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; dr_mode = "host"; disable-over-current; status = "okay"; + + usb2415host: hub@1 { + compatible = "usb424,2513"; + reg = <1>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-duration-us = <3000>; + }; }; &usbotg { @@ -481,11 +475,6 @@ MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0 /* usbh1_b OC */ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 - >; - }; - - pinctrl_usbh1_hubreset: usbh1hubresetgrp { - fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 4f27861..2e10ae8 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -5,6 +5,8 @@ * Author: Fabio Estevam */ +#include + / { aliases { backlight = &backlight; @@ -61,17 +63,6 @@ #address-cells = <1>; #size-cells = <0>; - reg_usb_h1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ - gpio = <&gpio7 12 0>; - }; - reg_panel: regulator@1 { compatible = "regulator-fixed"; reg = <1>; @@ -92,6 +83,17 @@ mux-int-port = <1>; mux-ext-port = <6>; }; + + udoo_ard: udoo_ard_manager { + compatible = "udoo,imx6q-udoo-ard"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_udooard>; + bossac-clk-gpio = <&gpio6 3 0>; + bossac-dat-gpio = <&gpio5 18 0>; + bossac-erase-gpio = <&gpio4 21 0>; + bossac-reset-gpio = <&gpio1 0 0>; + status = "okay"; + }; }; &fec { @@ -195,13 +197,29 @@ >; }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + pinctrl_usbh: usbhgrp { fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 >; }; + pinctrl_udooard: udooardgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x80000000 + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x80000000 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x80000000 + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -265,12 +283,25 @@ status = "okay"; }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh>; - vbus-supply = <®_usb_h1_vbus>; - clocks = <&clks IMX6QDL_CLK_CKO>; status = "okay"; + + usb2415: hub@1 { + compatible = "usb424,2514"; + reg = <1>; + + clocks = <&clks IMX6QDL_CLK_CKO>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-duration-us = <3000>; + }; }; &usdhc3 { diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi index 855dc6f..8476b89 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi @@ -11,6 +11,24 @@ #include "imx6qdl-wandboard.dtsi" +/ { + rfkill { + compatible = "wand,imx6qdl-wandboard-rfkill"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + bluetooth-on = <&gpio3 13 0>; + bluetooth-wake = <&gpio3 14 0>; + bluetooth-host-wake = <&gpio3 15 0>; + + wifi-ref-on = <&gpio2 29 0>; + wifi-rst-n = <&gpio5 2 0>; + wifi-reg-on = <&gpio1 26 0>; + wifi-host-wake = <&gpio1 29 0>; + wifi-wake = <&gpio1 30 0>; + }; +}; + &iomuxc { pinctrl-0 = <&pinctrl_hog>; @@ -36,6 +54,5 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi index 49a0a55..a909ac6 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi @@ -11,6 +11,24 @@ #include "imx6qdl-wandboard.dtsi" +/ { + rfkill { + compatible = "wand,imx6qdl-wandboard-rfkill"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + bluetooth-on = <&gpio5 21 0>; + bluetooth-wake = <&gpio5 30 0>; + bluetooth-host-wake = <&gpio5 20 0>; + + wifi-ref-on = <&gpio5 31 0>; /* Wifi Power Enable */ + wifi-rst-n = <&gpio6 0 0>; /* WIFI_ON reset */ + wifi-reg-on = <&gpio1 26 0>; /* WL_REG_ON */ + wifi-host-wake = <&gpio1 29 0>; /* WL_HOST_WAKE */ + wifi-wake = <&gpio1 30 0>; /* WL_WAKE */ + }; +}; + &iomuxc { pinctrl-0 = <&pinctrl_hog>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index d31d0ee..83b3f70 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -964,6 +964,8 @@ usbh1: usb@2184200 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x02184200 0x200>; interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; @@ -978,6 +980,8 @@ usbh2: usb@2184400 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x02184400 0x200>; interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; @@ -991,6 +995,8 @@ usbh3: usb@2184600 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x02184600 0x200>; interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; diff --git b/arch/arm/boot/dts/imx6ul-14x14-evk-ism43362-b81-evb.dts b/arch/arm/boot/dts/imx6ul-14x14-evk-ism43362-b81-evb.dts new file mode 100644 index 0000000..4920beb --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-14x14-evk-ism43362-b81-evb.dts @@ -0,0 +1,529 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6ul.dtsi" + +/ { + model = "Freescale i.MX6 UltraLite 14x14 EVK Board"; + compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + backlight_display: backlight-display { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_sd1_vmmc: sd1_regulator { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + wlreg_on: fixedregulator@100 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "wlreg_on"; + gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "mx6ul-wm8960"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Speaker", "SPK_LP", + "Speaker", "SPK_LN", + "Speaker", "SPK_RP", + "Speaker", "SPK_RN", + "LINPUT1", "Mic Jack", + "LINPUT3", "Mic Jack", + "RINPUT1", "Mic Jack", + "RINPUT2", "Mic Jack"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clks IMX6UL_CLK_SAI2>; + }; + }; + + panel { + compatible = "innolux,at043tn24"; + backlight = <&backlight_display>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec: wm8960@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8960"; + reg = <0x1a>; + wlf,shared-lrclk; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + mag3110@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + }; +}; + +&lcdif { + assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash0: n25q256a@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + reg = <0>; + }; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xfff>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; +}; + +&usbphy2 { + fsl,tx-d-cal = <106>; +}; + +®_sd1_vmmc { + regulator-always-on; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_csi1: csi1grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 + MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 + MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 + MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088 + MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088 + MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088 + MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088 + MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088 + MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088 + MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088 + MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088 + MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059 + >; + }; + + pinctrl_flexcan1: flexcan1grp{ + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + /* used for lcd reset */ + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 + >; + }; + + pinctrl_sim2: sim2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0xb808 + MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x31 + MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0xb808 + MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0xb808 + MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0xb809 + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x3008 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1 + MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */ + MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */ + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x3029 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x3029 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x3029 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts index ee02d93..f623196 100644 --- a/arch/arm/boot/dts/imx7d-pico-pi.dts +++ b/arch/arm/boot/dts/imx7d-pico-pi.dts @@ -43,6 +43,10 @@ #include "imx7d-pico.dtsi" / { + chosen { + stdout-path = "serial4:115200n8"; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index d80587d..c913e1c 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -155,6 +155,7 @@ }; etb@5401b000 { + status = "disabled"; compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x5401b000 0x1000>; @@ -169,6 +170,7 @@ }; etm@54010000 { + status = "disabled"; compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x54010000 0x1000>; @@ -214,6 +216,25 @@ >; }; + spi3_pins: pinmux_spi3_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT | MUX_MODE1) /* sdmmc2_clk.mcspi3_clk gpio_130 */ + 0x12a (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_cmd.mcspi3_simo gpio_131 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat0.mcspi3_somi gpio_132 */ + 0x130 (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat2.mcspi3_cs1 gpio_134 */ + 0x132 (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat3.mcspi3_cs0 gpio_135 */ + >; + }; + + spi4_pins: pinmux_spi4_pins { + pinctrl-single,pins = < + 0x15c (PIN_INPUT | MUX_MODE1) /* mcbsp1_clkr.mcspi4_clk gpio_156 */ + 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcbsp1_dx.mcspi4_simo gpio_158 */ + 0x162 (PIN_INPUT_PULLUP | MUX_MODE1) /* mcbsp1_dr.mcspi4_somi gpio_159 */ + 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcbsp1_fsx.mcspi4_cs0 gpio_161 */ + >; + }; + hsusb2_pins: pinmux_hsusb2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ @@ -291,7 +312,7 @@ }; twl_power: power { - compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; + compatible = "ti,twl4030-power-reset"; ti,use_poweroff; }; }; @@ -322,6 +343,36 @@ status = "disabled"; }; +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <48000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <48000000>; + }; +}; + +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + status = "okay"; + + spidev2: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <48000000>; + }; +}; + &twl_gpio { ti,use-leds; /* pullups: BIT(1) */ diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 3ca8991..64d6b74 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -142,6 +142,7 @@ }; etb@540000000 { + status = "disabled"; compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x5401b000 0x1000>; @@ -156,6 +157,7 @@ }; etm@54010000 { + status = "disabled"; compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x54010000 0x1000>; @@ -272,9 +274,18 @@ codec { }; }; + + twl_power: power { + compatible = "ti,twl4030-power-reset"; + ti,use_poweroff; + }; }; }; +&i2c2 { + clock-frequency = <400000>; +}; + #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index f1a6476..63b895b 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -10,6 +10,18 @@ #include "omap443x.dtsi" #include "omap4-panda-common.dtsi" +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 27895c1..bcdfe29 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -491,16 +491,6 @@ }; }; -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - &mcbsp1 { pinctrl-names = "default"; pinctrl-0 = <&mcbsp1_pins>; diff --git b/arch/arm/boot/dts/omap4-panda-es-b3.dts b/arch/arm/boot/dts/omap4-panda-es-b3.dts new file mode 100644 index 0000000..19d02df --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-es-b3.dts @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap4460.dtsi" +#include "omap4-panda-common.dtsi" + +/ { + model = "TI OMAP4 PandaBoard-ES"; + compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; +}; + +/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ +&sound { + ti,model = "PandaBoardES"; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "AFML", "Line In", + "AFMR", "Line In"; +}; + +/* PandaboardES has external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + >; +}; + +&omap4_pmx_core { + led_gpio_pins: gpio_led_pmx { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ + >; + }; +}; + +&led_wkgpio_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; +}; + +&leds { + pinctrl-0 = < + &led_gpio_pins + &led_wkgpio_pins + >; + + heartbeat { + gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; + }; + mmc { + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&gpio_keys { + buttonS2 { + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */ + }; +}; + +&gpio1_target { + ti,no-reset-on-init; +}; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 19d02df..027b587 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -15,6 +15,18 @@ compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; }; +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ &sound { ti,model = "PandaBoardES"; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index a0e28b2..3ee41ef 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -14,3 +14,15 @@ model = "TI OMAP4 PandaBoard"; compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 9dc7ec7..c78d3aa 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -503,11 +503,13 @@ &emif1 { cs1-used; device-handle = <&elpida_ECB240ABACN>; + status = "ok"; }; &emif2 { cs1-used; device-handle = <&elpida_ECB240ABACN>; + status = "ok"; }; &keypad { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 1a96d43..142ba6b 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -403,6 +403,7 @@ hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; + status = "disabled"; }; emif2: emif@4d000000 { @@ -415,6 +416,7 @@ hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; + status = "disabled"; }; timer5: timer@40138000 { diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index c45f97f..5ad5f8b 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -83,6 +83,11 @@ regulator-always-on; }; + clk32kg: regulator-clk32kg { + compatible = "ti,twl6030-clk32kg"; + regulator-always-on; + }; + twl_usb_comparator: usb-comparator { compatible = "ti,twl6030-usb"; interrupts = <4>, <10>; diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 6ffe572..bb7bd88 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -68,3 +68,9 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX config IMX_HAVE_PLATFORM_SPI_IMX bool + +config WAND_RFKILL + tristate "Wandboard RF Kill support" + depends on SOC_IMX6Q + default m + select RFKILL diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index e44758a..c179a55 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o +obj-$(CONFIG_WAND_RFKILL) += wand-rfkill.o diff --git b/arch/arm/mach-imx/devices/wand-rfkill.c b/arch/arm/mach-imx/devices/wand-rfkill.c new file mode 100644 index 0000000..da7ef9f --- /dev/null +++ b/arch/arm/mach-imx/devices/wand-rfkill.c @@ -0,0 +1,290 @@ +/* + * arch/arm/mach-imx/devices/wand-rfkill.c + * + * Copyright (C) 2013 Vladimir Ermakov + * + * based on net/rfkill/rfkill-gpio.c + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +struct wand_rfkill_data { + struct rfkill *rfkill_dev; + int shutdown_gpio; + const char *shutdown_name; +}; + +static int wand_rfkill_set_block(void *data, bool blocked) +{ + struct wand_rfkill_data *rfkill = data; + + pr_debug("wandboard-rfkill: set block %d\n", blocked); + + if (blocked) { + if (gpio_is_valid(rfkill->shutdown_gpio)) + gpio_direction_output(rfkill->shutdown_gpio, 0); + } else { + if (gpio_is_valid(rfkill->shutdown_gpio)) + gpio_direction_output(rfkill->shutdown_gpio, 1); + } + + return 0; +} + +static const struct rfkill_ops wand_rfkill_ops = { + .set_block = wand_rfkill_set_block, +}; + +static int wand_rfkill_wifi_probe(struct device *dev, + struct device_node *np, + struct wand_rfkill_data *rfkill) +{ + int ret; + int wl_ref_on, wl_rst_n, wl_reg_on, wl_wake, wl_host_wake; + + wl_ref_on = of_get_named_gpio(np, "wifi-ref-on", 0); + wl_rst_n = of_get_named_gpio(np, "wifi-rst-n", 0); + wl_reg_on = of_get_named_gpio(np, "wifi-reg-on", 0); + wl_wake = of_get_named_gpio(np, "wifi-wake", 0); + wl_host_wake = of_get_named_gpio(np, "wifi-host-wake", 0); + + if (!gpio_is_valid(wl_rst_n) || !gpio_is_valid(wl_ref_on) || + !gpio_is_valid(wl_reg_on) || !gpio_is_valid(wl_wake) || + !gpio_is_valid(wl_host_wake)) { + + dev_err(dev, "incorrect wifi gpios (%d %d %d %d %d)\n", + wl_rst_n, wl_ref_on, wl_reg_on, wl_wake, wl_host_wake); + return -EINVAL; + } + + dev_info(dev, "initialize wifi chip\n"); + + gpio_request(wl_rst_n, "wl_rst_n"); + gpio_direction_output(wl_rst_n, 0); + msleep(11); + gpio_set_value(wl_rst_n, 1); + + gpio_request(wl_ref_on, "wl_ref_on"); + gpio_direction_output(wl_ref_on, 1); + + gpio_request(wl_reg_on, "wl_reg_on"); + gpio_direction_output(wl_reg_on, 1); + + gpio_request(wl_wake, "wl_wake"); + gpio_direction_output(wl_wake, 1); + + gpio_request(wl_host_wake, "wl_host_wake"); + gpio_direction_input(wl_host_wake); + + rfkill->shutdown_name = "wifi_shutdown"; + rfkill->shutdown_gpio = wl_wake; + + rfkill->rfkill_dev = rfkill_alloc("wifi-rfkill", dev, RFKILL_TYPE_WLAN, + &wand_rfkill_ops, rfkill); + if (!rfkill->rfkill_dev) { + ret = -ENOMEM; + goto wifi_fail_free_gpio; + } + + ret = rfkill_register(rfkill->rfkill_dev); + if (ret < 0) + goto wifi_fail_unregister; + + dev_info(dev, "wifi-rfkill registered.\n"); + + return 0; + +wifi_fail_unregister: + rfkill_destroy(rfkill->rfkill_dev); +wifi_fail_free_gpio: + if (gpio_is_valid(wl_rst_n)) gpio_free(wl_rst_n); + if (gpio_is_valid(wl_ref_on)) gpio_free(wl_ref_on); + if (gpio_is_valid(wl_reg_on)) gpio_free(wl_reg_on); + if (gpio_is_valid(wl_wake)) gpio_free(wl_wake); + if (gpio_is_valid(wl_host_wake)) gpio_free(wl_host_wake); + + return ret; +} + +static int wand_rfkill_bt_probe(struct device *dev, + struct device_node *np, + struct wand_rfkill_data *rfkill) +{ + int ret; + int bt_on, bt_wake, bt_host_wake; + + bt_on = of_get_named_gpio(np, "bluetooth-on", 0); + bt_wake = of_get_named_gpio(np, "bluetooth-wake", 0); + bt_host_wake = of_get_named_gpio(np, "bluetooth-host-wake", 0); + + if (!gpio_is_valid(bt_on) || !gpio_is_valid(bt_wake) || + !gpio_is_valid(bt_host_wake)) { + + dev_err(dev, "incorrect bt gpios (%d %d %d)\n", + bt_on, bt_wake, bt_host_wake); + return -EINVAL; + } + + dev_info(dev, "initialize bluetooth chip\n"); + + gpio_request(bt_on, "bt_on"); + gpio_direction_output(bt_on, 0); + msleep(11); + gpio_set_value(bt_on, 1); + + gpio_request(bt_wake, "bt_wake"); + gpio_direction_output(bt_wake, 1); + + gpio_request(bt_host_wake, "bt_host_wake"); + gpio_direction_input(bt_host_wake); + + rfkill->shutdown_name = "bluetooth_shutdown"; + rfkill->shutdown_gpio = bt_wake; + + rfkill->rfkill_dev = rfkill_alloc("bluetooth-rfkill", dev, RFKILL_TYPE_BLUETOOTH, + &wand_rfkill_ops, rfkill); + if (!rfkill->rfkill_dev) { + ret = -ENOMEM; + goto bt_fail_free_gpio; + } + + ret = rfkill_register(rfkill->rfkill_dev); + if (ret < 0) + goto bt_fail_unregister; + + dev_info(dev, "bluetooth-rfkill registered.\n"); + + return 0; + +bt_fail_unregister: + rfkill_destroy(rfkill->rfkill_dev); +bt_fail_free_gpio: + if (gpio_is_valid(bt_on)) gpio_free(bt_on); + if (gpio_is_valid(bt_wake)) gpio_free(bt_wake); + if (gpio_is_valid(bt_host_wake)) gpio_free(bt_host_wake); + + return ret; +} + +static int wand_rfkill_probe(struct platform_device *pdev) +{ + struct wand_rfkill_data *rfkill; + struct pinctrl *pinctrl; + int ret; + + dev_info(&pdev->dev, "Wandboard rfkill initialization\n"); + + if (!pdev->dev.of_node) { + dev_err(&pdev->dev, "no device tree node\n"); + return -ENODEV; + } + + rfkill = kzalloc(sizeof(*rfkill) * 2, GFP_KERNEL); + if (!rfkill) + return -ENOMEM; + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + int ret = PTR_ERR(pinctrl); + dev_err(&pdev->dev, "failed to get default pinctrl: %d\n", ret); + return ret; + } + + /* setup WiFi */ + ret = wand_rfkill_wifi_probe(&pdev->dev, pdev->dev.of_node, &rfkill[0]); + if (ret < 0) + goto fail_free_rfkill; + + /* setup bluetooth */ + ret = wand_rfkill_bt_probe(&pdev->dev, pdev->dev.of_node, &rfkill[1]); + if (ret < 0) + goto fail_unregister_wifi; + + platform_set_drvdata(pdev, rfkill); + + return 0; + +fail_unregister_wifi: + if (rfkill[1].rfkill_dev) { + rfkill_unregister(rfkill[1].rfkill_dev); + rfkill_destroy(rfkill[1].rfkill_dev); + } + + /* TODO free gpio */ + +fail_free_rfkill: + kfree(rfkill); + + return ret; +} + +static int wand_rfkill_remove(struct platform_device *pdev) +{ + struct wand_rfkill_data *rfkill = platform_get_drvdata(pdev); + + dev_info(&pdev->dev, "Module unloading\n"); + + if (!rfkill) + return 0; + + /* WiFi */ + if (gpio_is_valid(rfkill[0].shutdown_gpio)) + gpio_free(rfkill[0].shutdown_gpio); + + rfkill_unregister(rfkill[0].rfkill_dev); + rfkill_destroy(rfkill[0].rfkill_dev); + + /* Bt */ + if (gpio_is_valid(rfkill[1].shutdown_gpio)) + gpio_free(rfkill[1].shutdown_gpio); + + rfkill_unregister(rfkill[1].rfkill_dev); + rfkill_destroy(rfkill[1].rfkill_dev); + + kfree(rfkill); + + return 0; +} + +static struct of_device_id wand_rfkill_match[] = { + { .compatible = "wand,imx6q-wandboard-rfkill", }, + { .compatible = "wand,imx6dl-wandboard-rfkill", }, + { .compatible = "wand,imx6qdl-wandboard-rfkill", }, + {} +}; + +static struct platform_driver wand_rfkill_driver = { + .driver = { + .name = "wandboard-rfkill", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(wand_rfkill_match), + }, + .probe = wand_rfkill_probe, + .remove = wand_rfkill_remove +}; + +module_platform_driver(wand_rfkill_driver); + +MODULE_AUTHOR("Vladimir Ermakov "); +MODULE_DESCRIPTION("Wandboard rfkill driver"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 41c7b90..18c95c8 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -141,8 +141,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct omap_hwmod *oh; struct device_node *node = pdev->dev.of_node; struct resource res; - const char *oh_name; - int oh_cnt, i, ret = 0; + const char *oh_name, *rst_name; + int oh_cnt, dstr_cnt, i, ret = 0; bool device_active = false, skip_pm_domain = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); @@ -189,6 +189,26 @@ static int omap_device_build_from_dt(struct platform_device *pdev) ret = PTR_ERR(od); goto odbfd_exit1; } + dstr_cnt = + of_property_count_strings(node, "ti,deassert-hard-reset"); + if (dstr_cnt > 0) { + for (i = 0; i < dstr_cnt; i += 2) { + of_property_read_string_index( + node, "ti,deassert-hard-reset", i, + &oh_name); + of_property_read_string_index( + node, "ti,deassert-hard-reset", i+1, + &rst_name); + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + dev_warn(&pdev->dev, + "Cannot parse deassert property for '%s'\n", + oh_name); + break; + } + omap_hwmod_deassert_hardreset(oh, rst_name); + } + } /* Fix up missing resource names */ for (i = 0; i < pdev->num_resources; i++) { diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c index c509324..b94b15b 100644 --- a/drivers/clk/imx/clk-imx6q.c +++ b/drivers/clk/imx/clk-imx6q.c @@ -916,5 +916,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) } imx_register_uart_clocks(uart_clks); + + if (of_machine_is_compatible("udoo,imx6dl-udoo") || + of_machine_is_compatible("udoo,imx6q-udoo")) + clk_prepare_enable(clk[IMX6QDL_CLK_CKO]); + } CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 4f52c3a..4069485 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -73,6 +73,20 @@ config GPIO_SYSFS Kernel drivers may also request that a particular GPIO be exported to userspace; this can be useful when debugging. +config GPIO_OF_HELPER + bool "GPIO OF helper device (EXPERIMENTAL)" + depends on OF_GPIO + help + Say Y here to add an GPIO OF helper driver + + Allows you specify a GPIO helper based on OF + which allows simple export of GPIO functionality + in user-space. + + Features include, value set/get, direction control, + interrupt/value change poll support, event counting + and others. + config GPIO_GENERIC depends on HAS_IOMEM # Only for IOMEM drivers tristate diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index c256aff..2c11fc0 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_GPIOLIB) += gpiolib-devprop.o obj-$(CONFIG_OF_GPIO) += gpiolib-of.o obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o +obj-$(CONFIG_GPIO_OF_HELPER) += gpio-of-helper.o # Device drivers. Generally keep list sorted alphabetically obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o diff --git b/drivers/gpio/gpio-of-helper.c b/drivers/gpio/gpio-of-helper.c new file mode 100644 index 0000000..83f362f --- /dev/null +++ b/drivers/gpio/gpio-of-helper.c @@ -0,0 +1,435 @@ +/* + * GPIO OF based helper + * + * A simple DT based driver to provide access to GPIO functionality + * to user-space via sysfs. + * + * Copyright (C) 2013 Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include