diff --git linux-libre-6.7-gnu/.clang-format linux-libre-6.8-gnu/.clang-format
index 0bbb1991defe..ccc9b93972a9 100644
--- linux-libre-6.7-gnu/.clang-format
+++ linux-libre-6.8-gnu/.clang-format
@@ -82,11 +82,16 @@ ForEachMacros:
   - '__for_each_thread'
   - '__hlist_for_each_rcu'
   - '__map__for_each_symbol_by_name'
+  - '__pci_bus_for_each_res0'
+  - '__pci_bus_for_each_res1'
+  - '__pci_dev_for_each_res0'
+  - '__pci_dev_for_each_res1'
   - '__perf_evlist__for_each_entry'
   - '__perf_evlist__for_each_entry_reverse'
   - '__perf_evlist__for_each_entry_safe'
   - '__rq_for_each_bio'
   - '__shost_for_each_device'
+  - '__sym_for_each'
   - 'apei_estatus_for_each_section'
   - 'ata_for_each_dev'
   - 'ata_for_each_link'
@@ -105,13 +110,12 @@ ForEachMacros:
   - 'bip_for_each_vec'
   - 'bond_for_each_slave'
   - 'bond_for_each_slave_rcu'
-  - 'bpf__perf_for_each_map'
-  - 'bpf__perf_for_each_map_named'
+  - 'bpf_for_each'
+  - 'bpf_for_each_reg_in_vstate'
+  - 'bpf_for_each_reg_in_vstate_mask'
   - 'bpf_for_each_spilled_reg'
   - 'bpf_object__for_each_map'
   - 'bpf_object__for_each_program'
-  - 'bpf_object__for_each_safe'
-  - 'bpf_perf_object__for_each'
   - 'btree_for_each_safe128'
   - 'btree_for_each_safe32'
   - 'btree_for_each_safe64'
@@ -119,6 +123,7 @@ ForEachMacros:
   - 'card_for_each_dev'
   - 'cgroup_taskset_for_each'
   - 'cgroup_taskset_for_each_leader'
+  - 'cpu_aggr_map__for_each_idx'
   - 'cpufreq_for_each_efficient_entry_idx'
   - 'cpufreq_for_each_entry'
   - 'cpufreq_for_each_entry_idx'
@@ -128,11 +133,14 @@ ForEachMacros:
   - 'css_for_each_descendant_post'
   - 'css_for_each_descendant_pre'
   - 'damon_for_each_region'
+  - 'damon_for_each_region_from'
   - 'damon_for_each_region_safe'
   - 'damon_for_each_scheme'
   - 'damon_for_each_scheme_safe'
   - 'damon_for_each_target'
   - 'damon_for_each_target_safe'
+  - 'damos_for_each_filter'
+  - 'damos_for_each_filter_safe'
   - 'data__for_each_file'
   - 'data__for_each_file_new'
   - 'data__for_each_file_start'
@@ -151,6 +159,8 @@ ForEachMacros:
   - 'drm_client_for_each_connector_iter'
   - 'drm_client_for_each_modeset'
   - 'drm_connector_for_each_possible_encoder'
+  - 'drm_exec_for_each_locked_object'
+  - 'drm_exec_for_each_locked_object_reverse'
   - 'drm_for_each_bridge_in_chain'
   - 'drm_for_each_connector_iter'
   - 'drm_for_each_crtc'
@@ -162,22 +172,32 @@ ForEachMacros:
   - 'drm_for_each_plane'
   - 'drm_for_each_plane_mask'
   - 'drm_for_each_privobj'
+  - 'drm_gem_for_each_gpuva'
+  - 'drm_gem_for_each_gpuva_safe'
+  - 'drm_gpuva_for_each_op'
+  - 'drm_gpuva_for_each_op_from_reverse'
+  - 'drm_gpuva_for_each_op_safe'
+  - 'drm_gpuvm_for_each_va'
+  - 'drm_gpuvm_for_each_va_range'
+  - 'drm_gpuvm_for_each_va_range_safe'
+  - 'drm_gpuvm_for_each_va_safe'
   - 'drm_mm_for_each_hole'
   - 'drm_mm_for_each_node'
   - 'drm_mm_for_each_node_in_range'
   - 'drm_mm_for_each_node_safe'
   - 'dsa_switch_for_each_available_port'
   - 'dsa_switch_for_each_cpu_port'
+  - 'dsa_switch_for_each_cpu_port_continue_reverse'
   - 'dsa_switch_for_each_port'
   - 'dsa_switch_for_each_port_continue_reverse'
   - 'dsa_switch_for_each_port_safe'
   - 'dsa_switch_for_each_user_port'
+  - 'dsa_tree_for_each_cpu_port'
   - 'dsa_tree_for_each_user_port'
+  - 'dsa_tree_for_each_user_port_continue_reverse'
   - 'dso__for_each_symbol'
   - 'dsos__for_each_with_build_id'
   - 'elf_hash_for_each_possible'
-  - 'elf_section__for_each_rel'
-  - 'elf_section__for_each_rela'
   - 'elf_symtab__for_each_symbol'
   - 'evlist__for_each_cpu'
   - 'evlist__for_each_entry'
@@ -186,12 +206,15 @@ ForEachMacros:
   - 'evlist__for_each_entry_reverse'
   - 'evlist__for_each_entry_safe'
   - 'flow_action_for_each'
+  - 'for_each_acpi_consumer_dev'
   - 'for_each_acpi_dev_match'
   - 'for_each_active_dev_scope'
   - 'for_each_active_drhd_unit'
   - 'for_each_active_iommu'
   - 'for_each_active_route'
   - 'for_each_aggr_pgid'
+  - 'for_each_and_bit'
+  - 'for_each_andnot_bit'
   - 'for_each_available_child_of_node'
   - 'for_each_bench'
   - 'for_each_bio'
@@ -222,10 +245,13 @@ ForEachMacros:
   - 'for_each_compatible_node'
   - 'for_each_component_dais'
   - 'for_each_component_dais_safe'
+  - 'for_each_conduit'
   - 'for_each_console'
   - 'for_each_console_srcu'
   - 'for_each_cpu'
   - 'for_each_cpu_and'
+  - 'for_each_cpu_andnot'
+  - 'for_each_cpu_or'
   - 'for_each_cpu_wrap'
   - 'for_each_dapm_widgets'
   - 'for_each_dedup_cand'
@@ -254,9 +280,11 @@ ForEachMacros:
   - 'for_each_free_mem_range'
   - 'for_each_free_mem_range_reverse'
   - 'for_each_func_rsrc'
-  - 'for_each_group_device'
+  - 'for_each_gpiochip_node'
   - 'for_each_group_evsel'
+  - 'for_each_group_evsel_head'
   - 'for_each_group_member'
+  - 'for_each_group_member_head'
   - 'for_each_hstate'
   - 'for_each_if'
   - 'for_each_inject_fn'
@@ -273,6 +301,7 @@ ForEachMacros:
   - 'for_each_lru'
   - 'for_each_matching_node'
   - 'for_each_matching_node_and_match'
+  - 'for_each_media_entity_data_link'
   - 'for_each_mem_pfn_range'
   - 'for_each_mem_range'
   - 'for_each_mem_range_rev'
@@ -281,6 +310,8 @@ ForEachMacros:
   - 'for_each_memory'
   - 'for_each_migratetype_order'
   - 'for_each_missing_reg'
+  - 'for_each_mle_subelement'
+  - 'for_each_mod_mem_type'
   - 'for_each_net'
   - 'for_each_net_continue_reverse'
   - 'for_each_net_rcu'
@@ -288,6 +319,7 @@ ForEachMacros:
   - 'for_each_netdev_continue'
   - 'for_each_netdev_continue_rcu'
   - 'for_each_netdev_continue_reverse'
+  - 'for_each_netdev_dump'
   - 'for_each_netdev_feature'
   - 'for_each_netdev_in_bond_rcu'
   - 'for_each_netdev_rcu'
@@ -308,6 +340,7 @@ ForEachMacros:
   - 'for_each_node_with_cpus'
   - 'for_each_node_with_property'
   - 'for_each_nonreserved_multicast_dest_pgid'
+  - 'for_each_numa_hop_mask'
   - 'for_each_of_allnodes'
   - 'for_each_of_allnodes_from'
   - 'for_each_of_cpu_node'
@@ -326,6 +359,7 @@ ForEachMacros:
   - 'for_each_online_cpu'
   - 'for_each_online_node'
   - 'for_each_online_pgdat'
+  - 'for_each_or_bit'
   - 'for_each_path'
   - 'for_each_pci_bridge'
   - 'for_each_pci_dev'
@@ -333,6 +367,7 @@ ForEachMacros:
   - 'for_each_physmem_range'
   - 'for_each_populated_zone'
   - 'for_each_possible_cpu'
+  - 'for_each_present_blessed_reg'
   - 'for_each_present_cpu'
   - 'for_each_prime_number'
   - 'for_each_prime_number_from'
@@ -348,7 +383,8 @@ ForEachMacros:
   - 'for_each_property_of_node'
   - 'for_each_reg'
   - 'for_each_reg_filtered'
-  - 'for_each_registered_fb'
+  - 'for_each_reloc'
+  - 'for_each_reloc_from'
   - 'for_each_requested_gpio'
   - 'for_each_requested_gpio_in_range'
   - 'for_each_reserved_mem_range'
@@ -357,10 +393,12 @@ ForEachMacros:
   - 'for_each_rtd_components'
   - 'for_each_rtd_cpu_dais'
   - 'for_each_rtd_dais'
+  - 'for_each_sband_iftype_data'
   - 'for_each_script'
   - 'for_each_sec'
   - 'for_each_set_bit'
   - 'for_each_set_bit_from'
+  - 'for_each_set_bit_wrap'
   - 'for_each_set_bitrange'
   - 'for_each_set_bitrange_from'
   - 'for_each_set_clump8'
@@ -371,8 +409,8 @@ ForEachMacros:
   - 'for_each_sgtable_dma_sg'
   - 'for_each_sgtable_page'
   - 'for_each_sgtable_sg'
-  - 'for_each_shell_test'
   - 'for_each_sibling_event'
+  - 'for_each_sta_active_link'
   - 'for_each_subelement'
   - 'for_each_subelement_extid'
   - 'for_each_subelement_id'
@@ -380,10 +418,15 @@ ForEachMacros:
   - 'for_each_subsystem'
   - 'for_each_supported_activate_fn'
   - 'for_each_supported_inject_fn'
+  - 'for_each_sym'
   - 'for_each_test'
   - 'for_each_thread'
   - 'for_each_token'
   - 'for_each_unicast_dest_pgid'
+  - 'for_each_valid_link'
+  - 'for_each_vif_active_link'
+  - 'for_each_vma'
+  - 'for_each_vma_range'
   - 'for_each_vsi'
   - 'for_each_wakeup_source'
   - 'for_each_zone'
@@ -392,10 +435,12 @@ ForEachMacros:
   - 'func_for_each_insn'
   - 'fwnode_for_each_available_child_node'
   - 'fwnode_for_each_child_node'
+  - 'fwnode_for_each_parent_node'
   - 'fwnode_graph_for_each_endpoint'
   - 'gadget_for_each_ep'
   - 'genradix_for_each'
   - 'genradix_for_each_from'
+  - 'genradix_for_each_reverse'
   - 'hash_for_each'
   - 'hash_for_each_possible'
   - 'hash_for_each_possible_rcu'
@@ -439,14 +484,9 @@ ForEachMacros:
   - 'in_dev_for_each_ifa_rcu'
   - 'in_dev_for_each_ifa_rtnl'
   - 'inet_bind_bucket_for_each'
-  - 'inet_lhash2_for_each_icsk'
-  - 'inet_lhash2_for_each_icsk_continue'
-  - 'inet_lhash2_for_each_icsk_rcu'
-  - 'interval_tree_for_each_double_span'
   - 'interval_tree_for_each_span'
   - 'intlist__for_each_entry'
   - 'intlist__for_each_entry_safe'
-  - 'iopt_for_each_contig_area'
   - 'kcore_copy__for_each_phdr'
   - 'key_for_each'
   - 'key_for_each_safe'
@@ -483,28 +523,38 @@ ForEachMacros:
   - 'list_for_each_from'
   - 'list_for_each_prev'
   - 'list_for_each_prev_safe'
+  - 'list_for_each_rcu'
+  - 'list_for_each_reverse'
   - 'list_for_each_safe'
   - 'llist_for_each'
   - 'llist_for_each_entry'
   - 'llist_for_each_entry_safe'
   - 'llist_for_each_safe'
+  - 'lwq_for_each_safe'
   - 'map__for_each_symbol'
   - 'map__for_each_symbol_by_name'
-  - 'map_for_each_event'
-  - 'map_for_each_metric'
   - 'maps__for_each_entry'
   - 'maps__for_each_entry_safe'
+  - 'mas_for_each'
   - 'mci_for_each_dimm'
   - 'media_device_for_each_entity'
   - 'media_device_for_each_intf'
   - 'media_device_for_each_link'
   - 'media_device_for_each_pad'
+  - 'media_entity_for_each_pad'
+  - 'media_pipeline_for_each_entity'
+  - 'media_pipeline_for_each_pad'
+  - 'mlx5_lag_for_each_peer_mdev'
+  - 'msi_domain_for_each_desc'
   - 'msi_for_each_desc'
+  - 'mt_for_each'
   - 'nanddev_io_for_each_page'
   - 'netdev_for_each_lower_dev'
   - 'netdev_for_each_lower_private'
   - 'netdev_for_each_lower_private_rcu'
   - 'netdev_for_each_mc_addr'
+  - 'netdev_for_each_synced_mc_addr'
+  - 'netdev_for_each_synced_uc_addr'
   - 'netdev_for_each_uc_addr'
   - 'netdev_for_each_upper_dev_rcu'
   - 'netdev_hw_addr_list_for_each'
@@ -529,6 +579,7 @@ ForEachMacros:
   - 'perf_config_sections__for_each_entry'
   - 'perf_config_set__for_each_entry'
   - 'perf_cpu_map__for_each_cpu'
+  - 'perf_cpu_map__for_each_idx'
   - 'perf_evlist__for_each_entry'
   - 'perf_evlist__for_each_entry_reverse'
   - 'perf_evlist__for_each_entry_safe'
@@ -538,9 +589,7 @@ ForEachMacros:
   - 'perf_hpp_list__for_each_format_safe'
   - 'perf_hpp_list__for_each_sort_list'
   - 'perf_hpp_list__for_each_sort_list_safe'
-  - 'perf_pmu__for_each_hybrid_pmu'
-  - 'ping_portaddr_for_each_entry'
-  - 'ping_portaddr_for_each_entry_rcu'
+  - 'perf_tool_event__for_each_event'
   - 'plist_for_each'
   - 'plist_for_each_continue'
   - 'plist_for_each_entry'
@@ -577,6 +626,7 @@ ForEachMacros:
   - 'rq_for_each_segment'
   - 'rq_list_for_each'
   - 'rq_list_for_each_safe'
+  - 'sample_read_group__for_each'
   - 'scsi_for_each_prot_sg'
   - 'scsi_for_each_sg'
   - 'sctp_for_each_hentry'
@@ -584,10 +634,12 @@ ForEachMacros:
   - 'sec_for_each_insn'
   - 'sec_for_each_insn_continue'
   - 'sec_for_each_insn_from'
+  - 'sec_for_each_sym'
   - 'shdma_for_each_chan'
   - 'shost_for_each_device'
   - 'sk_for_each'
   - 'sk_for_each_bound'
+  - 'sk_for_each_bound_bhash2'
   - 'sk_for_each_entry_offset_rcu'
   - 'sk_for_each_from'
   - 'sk_for_each_rcu'
@@ -609,6 +661,8 @@ ForEachMacros:
   - 'tb_property_for_each'
   - 'tcf_act_for_each_action'
   - 'tcf_exts_for_each_action'
+  - 'ttm_resource_manager_for_each_res'
+  - 'twsk_for_each_bound_bhash2'
   - 'udp_portaddr_for_each_entry'
   - 'udp_portaddr_for_each_entry_rcu'
   - 'usb_hub_for_each_child'
diff --git linux-libre-6.7-gnu/.editorconfig linux-libre-6.8-gnu/.editorconfig
new file mode 100644
index 000000000000..854773350cc5
--- /dev/null
+++ linux-libre-6.8-gnu/.editorconfig
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+root = true
+
+[{*.{awk,c,dts,dtsi,dtso,h,mk,s,S},Kconfig,Makefile,Makefile.*}]
+charset = utf-8
+end_of_line = lf
+trim_trailing_whitespace = true
+insert_final_newline = true
+indent_style = tab
+indent_size = 8
+
+[*.{json,py,rs}]
+charset = utf-8
+end_of_line = lf
+trim_trailing_whitespace = true
+insert_final_newline = true
+indent_style = space
+indent_size = 4
+
+# this must be below the general *.py to overwrite it
+[tools/{perf,power,rcu,testing/kunit}/**.py,]
+indent_style = tab
+indent_size = 8
+
+[*.yaml]
+charset = utf-8
+end_of_line = lf
+trim_trailing_whitespace = unset
+insert_final_newline = true
+indent_style = space
+indent_size = 2
diff --git linux-libre-6.7-gnu/.gitignore linux-libre-6.8-gnu/.gitignore
index 98274e1160d7..689a4fa3f547 100644
--- linux-libre-6.7-gnu/.gitignore
+++ linux-libre-6.8-gnu/.gitignore
@@ -96,6 +96,7 @@ modules.order
 #
 !.clang-format
 !.cocciconfig
+!.editorconfig
 !.get_maintainer.ignore
 !.gitattributes
 !.gitignore
diff --git linux-libre-6.7-gnu/.mailmap linux-libre-6.8-gnu/.mailmap
index ac1d4692e2e8..bd9f1025ac44 100644
--- linux-libre-6.7-gnu/.mailmap
+++ linux-libre-6.8-gnu/.mailmap
@@ -191,10 +191,11 @@ Gao Xiang <xiang@kernel.org> <gaoxiang25@huawei.com>
 Gao Xiang <xiang@kernel.org> <hsiangkao@aol.com>
 Gao Xiang <xiang@kernel.org> <hsiangkao@linux.alibaba.com>
 Gao Xiang <xiang@kernel.org> <hsiangkao@redhat.com>
-Geliang Tang <geliang.tang@linux.dev> <geliang.tang@suse.com>
-Geliang Tang <geliang.tang@linux.dev> <geliangtang@xiaomi.com>
-Geliang Tang <geliang.tang@linux.dev> <geliangtang@gmail.com>
-Geliang Tang <geliang.tang@linux.dev> <geliangtang@163.com>
+Geliang Tang <geliang@kernel.org> <geliang.tang@linux.dev>
+Geliang Tang <geliang@kernel.org> <geliang.tang@suse.com>
+Geliang Tang <geliang@kernel.org> <geliangtang@xiaomi.com>
+Geliang Tang <geliang@kernel.org> <geliangtang@gmail.com>
+Geliang Tang <geliang@kernel.org> <geliangtang@163.com>
 Georgi Djakov <djakov@kernel.org> <georgi.djakov@linaro.org>
 Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@de.ibm.com>
 Gerald Schaefer <gerald.schaefer@linux.ibm.com> <gerald.schaefer@de.ibm.com>
@@ -289,6 +290,7 @@ Johan Hovold <johan@kernel.org> <johan@hovoldconsulting.com>
 John Crispin <john@phrozen.org> <blogic@openwrt.org>
 John Fastabend <john.fastabend@gmail.com> <john.r.fastabend@intel.com>
 John Keeping <john@keeping.me.uk> <john@metanate.com>
+John Moon <john@jmoon.dev> <quic_johmoo@quicinc.com>
 John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
 John Stultz <johnstul@us.ibm.com>
 <jon.toppins+linux@gmail.com> <jtoppins@cumulusnetworks.com>
@@ -323,6 +325,7 @@ Kenneth W Chen <kenneth.w.chen@intel.com>
 Kenneth Westfield <quic_kwestfie@quicinc.com> <kwestfie@codeaurora.org>
 Kiran Gunda <quic_kgunda@quicinc.com> <kgunda@codeaurora.org>
 Kirill Tkhai <tkhai@ya.ru> <ktkhai@virtuozzo.com>
+Kishon Vijay Abraham I <kishon@kernel.org> <kishon@ti.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <khlebnikov@yandex-team.ru>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
 Koushik <raghavendra.koushik@neterion.com>
@@ -344,6 +347,7 @@ Leonid I Ananiev <leonid.i.ananiev@intel.com>
 Leon Romanovsky <leon@kernel.org> <leon@leon.nu>
 Leon Romanovsky <leon@kernel.org> <leonro@mellanox.com>
 Leon Romanovsky <leon@kernel.org> <leonro@nvidia.com>
+Leo Yan <leo.yan@linux.dev> <leo.yan@linaro.org>
 Liam Mark <quic_lmark@quicinc.com> <lmark@codeaurora.org>
 Linas Vepstas <linas@austin.ibm.com>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
@@ -363,7 +367,6 @@ Maheshwar Ajja <quic_majja@quicinc.com> <majja@codeaurora.org>
 Malathi Gottam <quic_mgottam@quicinc.com> <mgottam@codeaurora.org>
 Manikanta Pubbisetty <quic_mpubbise@quicinc.com> <mpubbise@codeaurora.org>
 Manivannan Sadhasivam <mani@kernel.org> <manivannanece23@gmail.com>
-Manivannan Sadhasivam <mani@kernel.org> <manivannan.sadhasivam@linaro.org>
 Manoj Basapathi <quic_manojbm@quicinc.com> <manojbm@codeaurora.org>
 Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
 Marc Zyngier <maz@kernel.org> <marc.zyngier@arm.com>
@@ -391,9 +394,10 @@ Matthias Fuchs <socketcan@esd.eu> <matthias.fuchs@esd.eu>
 Matthieu Baerts <matttbe@kernel.org> <matthieu.baerts@tessares.net>
 Matthieu CASTET <castet.matthieu@free.fr>
 Matti Vaittinen <mazziesaccount@gmail.com> <matti.vaittinen@fi.rohmeurope.com>
-Matt Ranostay <matt.ranostay@konsulko.com> <matt@ranostay.consulting>
-Matt Ranostay <mranostay@gmail.com> Matthew Ranostay <mranostay@embeddedalley.com>
-Matt Ranostay <mranostay@gmail.com> <matt.ranostay@intel.com>
+Matt Ranostay <matt@ranostay.sg> <matt.ranostay@konsulko.com>
+Matt Ranostay <matt@ranostay.sg> <matt@ranostay.consulting>
+Matt Ranostay <matt@ranostay.sg> Matthew Ranostay <mranostay@embeddedalley.com>
+Matt Ranostay <matt@ranostay.sg> <matt.ranostay@intel.com>
 Matt Redfearn <matt.redfearn@mips.com> <matt.redfearn@imgtec.com>
 Maulik Shah <quic_mkshah@quicinc.com> <mkshah@codeaurora.org>
 Mauro Carvalho Chehab <mchehab@kernel.org> <maurochehab@gmail.com>
@@ -478,6 +482,8 @@ Paul E. McKenney <paulmck@kernel.org> <paulmck@linux.vnet.ibm.com>
 Paul E. McKenney <paulmck@kernel.org> <paulmck@us.ibm.com>
 Paul Mackerras <paulus@ozlabs.org> <paulus@samba.org>
 Paul Mackerras <paulus@ozlabs.org> <paulus@au1.ibm.com>
+Paul Moore <paul@paul-moore.com> <paul.moore@hp.com>
+Paul Moore <paul@paul-moore.com> <pmoore@redhat.com>
 Pavankumar Kondeti <quic_pkondeti@quicinc.com> <pkondeti@codeaurora.org>
 Peter A Jonsson <pj@ludd.ltu.se>
 Peter Oruba <peter.oruba@amd.com>
@@ -502,6 +508,9 @@ Ralf Baechle <ralf@linux-mips.org>
 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
 Ram Chandra Jangir <quic_rjangir@quicinc.com> <rjangir@codeaurora.org>
 Randy Dunlap <rdunlap@infradead.org> <rdunlap@xenotime.net>
+Randy Dunlap <rdunlap@infradead.org> <randy.dunlap@oracle.com>
+Randy Dunlap <rdunlap@infradead.org> <rddunlap@osdl.org>
+Randy Dunlap <rdunlap@infradead.org> <randy.dunlap@intel.com>
 Ravi Kumar Bokka <quic_rbokka@quicinc.com> <rbokka@codeaurora.org>
 Ravi Kumar Siddojigari <quic_rsiddoji@quicinc.com> <rsiddoji@codeaurora.org>
 Rémi Denis-Courmont <rdenis@simphalempin.com>
@@ -542,7 +551,10 @@ Sebastian Reichel <sre@kernel.org> <sebastian.reichel@collabora.co.uk>
 Sebastian Reichel <sre@kernel.org> <sre@debian.org>
 Sedat Dilek <sedat.dilek@gmail.com> <sedat.dilek@credativ.de>
 Senthilkumar N L <quic_snlakshm@quicinc.com> <snlakshm@codeaurora.org>
+Serge Hallyn <sergeh@kernel.org> <serge.hallyn@canonical.com>
+Serge Hallyn <sergeh@kernel.org> <serue@us.ibm.com>
 Seth Forshee <sforshee@kernel.org> <seth.forshee@canonical.com>
+Shakeel Butt <shakeel.butt@linux.dev> <shakeelb@google.com>
 Shannon Nelson <shannon.nelson@amd.com> <snelson@pensando.io>
 Shannon Nelson <shannon.nelson@amd.com> <shannon.nelson@intel.com>
 Shannon Nelson <shannon.nelson@amd.com> <shannon.nelson@oracle.com>
@@ -578,6 +590,7 @@ Surabhi Vishnoi <quic_svishnoi@quicinc.com> <svishnoi@codeaurora.org>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> <tamizhr@codeaurora.org>
 Taniya Das <quic_tdas@quicinc.com> <tdas@codeaurora.org>
+Tanzir Hasan <tanzhasanwork@gmail.com> <tanzirh@google.com>
 Tejun Heo <htejun@gmail.com>
 Tomeu Vizoso <tomeu@tomeuvizoso.net> <tomeu.vizoso@collabora.com>
 Thomas Graf <tgraf@suug.ch>
@@ -597,6 +610,11 @@ TripleX Chung <xxx.phy@gmail.com> <triplex@zh-kernel.org>
 TripleX Chung <xxx.phy@gmail.com> <zhongyu@18mail.cn>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
 Tudor Ambarus <tudor.ambarus@linaro.org> <tudor.ambarus@microchip.com>
+Tvrtko Ursulin <tursulin@ursulin.net> <tvrtko.ursulin@intel.com>
+Tvrtko Ursulin <tursulin@ursulin.net> <tvrtko.ursulin@linux.intel.com>
+Tvrtko Ursulin <tursulin@ursulin.net> <tvrtko.ursulin@sophos.com>
+Tvrtko Ursulin <tursulin@ursulin.net> <tvrtko.ursulin@onelan.co.uk>
+Tvrtko Ursulin <tursulin@ursulin.net> <tvrtko@ursulin.net>
 Tycho Andersen <tycho@tycho.pizza> <tycho@tycho.ws>
 Tzung-Bi Shih <tzungbi@kernel.org> <tzungbi@google.com>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
@@ -604,6 +622,9 @@ Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Uwe Kleine-König <ukleinek@strlen.de>
 Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
+Vadim Fedorenko <vadim.fedorenko@linux.dev> <vadfed@fb.com>
+Vadim Fedorenko <vadim.fedorenko@linux.dev> <vadfed@meta.com>
+Vadim Fedorenko <vadim.fedorenko@linux.dev> <vfedorenko@novek.ru>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
 Vara Reddy <quic_varar@quicinc.com> <varar@codeaurora.org>
 Varadarajan Narayanan <quic_varada@quicinc.com> <varada@codeaurora.org>
diff --git linux-libre-6.7-gnu/CREDITS linux-libre-6.8-gnu/CREDITS
index d9adc4e489a7..df8d6946739f 100644
--- linux-libre-6.7-gnu/CREDITS
+++ linux-libre-6.8-gnu/CREDITS
@@ -9,10 +9,6 @@
 			Linus
 ----------
 
-N: Matt Mackal
-E: mpm@selenic.com
-D: SLOB slab allocator
-
 N: Matti Aarnio
 E: mea@nic.funet.fi
 D: Alpha systems hacking, IPv6 and other network related stuff
@@ -183,6 +179,7 @@ E: ralf@gnu.org
 P: 1024/AF7B30C1 CF 97 C2 CC 6D AE A7 FE  C8 BA 9C FC 88 DE 32 C3
 D: Linux/MIPS port
 D: Linux/68k hacker
+D: AX25 maintainer
 S: Hauptstrasse 19
 S: 79837 St. Blasien
 S: Germany
@@ -323,6 +320,9 @@ N: Ohad Ben Cohen
 E: ohad@wizery.com
 D: Remote Processor (remoteproc) subsystem
 D: Remote Processor Messaging (rpmsg) subsystem
+D: Hardware spinlock (hwspinlock) subsystem
+D: OMAP hwspinlock driver
+D: OMAP remoteproc driver
 
 N: Krzysztof Benedyczak
 E: golbi@mat.uni.torun.pl
@@ -678,6 +678,10 @@ D: Media subsystem (V4L/DVB) drivers and core
 D: EDAC drivers and EDAC 3.0 core rework
 S: Brazil
 
+N: Landen Chao
+E: Landen.Chao@mediatek.com
+D: MT7531 Ethernet switch support
+
 N: Raymond Chen
 E: raymondc@microsoft.com
 D: Author of Configure script
@@ -815,6 +819,10 @@ D: Support for Xircom PGSDB9 (firmware and host driver)
 S: Bucharest
 S: Romania
 
+N: John Crispin
+E: john@phrozen.org
+D: MediaTek MT7623 Gigabit ethernet support
+
 N: Laurence Culhane
 E: loz@holmes.demon.co.uk
 D: Wrote the initial alpha SLIP code
@@ -1425,6 +1433,10 @@ S: University of Stellenbosch
 S: Stellenbosch, Western Cape
 S: South Africa
 
+N: Andy Gross
+E: agross@kernel.org
+D: Qualcomm SoC subsystem and drivers
+
 N: Grant Grundler
 E: grantgrundler@gmail.com
 W: http://obmouse.sourceforge.net/
@@ -1535,6 +1547,10 @@ N: Andrew Haylett
 E: ajh@primag.co.uk
 D: Selection mechanism
 
+N: Johan Hedberg
+E: johan.hedberg@gmail.com
+D: Bluetooth subsystem maintainer
+
 N: Andre Hedrick
 E: andre@linux-ide.org
 E: andre@linuxdiskcert.org
@@ -1572,6 +1588,10 @@ S: Ampferstr. 50 / 4
 S: 6020 Innsbruck
 S: Austria
 
+N: Mark Hemment
+E: markhe@nextd.demon.co.uk
+D: SLAB allocator implementation
+
 N: Richard Henderson
 E: rth@twiddle.net
 E: rth@cygnus.com
@@ -1828,6 +1848,13 @@ S: K osmidomkum 723
 S: 160 00 Praha 6
 S: Czech Republic
 
+N: Michael Kerrisk
+E: mtk.manpages@gmail.com
+W: https://man7.org/
+P: 4096R/3A35CE5E E522 595B 52ED A4E6 BFCC  CB5E 8561 9911 3A35 CE5E
+D: Maintainer of the Linux man-pages project
+D: Linux man pages online, at <https://man7.org/linux/man-pages/>
+
 N: Niels Kristian Bech Jensen
 E: nkbj1970@hotmail.com
 D: Miscellaneous kernel updates and fixes.
@@ -2134,6 +2161,19 @@ N: Mike Kravetz
 E: mike.kravetz@oracle.com
 D: Maintenance and development of the hugetlb subsystem
 
+N: Seth Jennings
+E: sjenning@redhat.com
+D: Creation and maintenance of zswap
+
+N: Dan Streetman
+E: ddstreet@ieee.org
+D: Maintenance and development of zswap
+D: Creation and maintenance of the zpool API
+
+N: Vitaly Wool
+E: vitaly.wool@konsulko.com
+D: Maintenance and development of zswap
+
 N: Andreas S. Krebs
 E: akrebs@altavista.net
 D: CYPRESS CY82C693 chipset IDE, Digital's PC-Alpha 164SX boards
@@ -2445,6 +2485,10 @@ D: work on suspend-to-ram/disk, killing duplicates from ioctl32,
 D: Altera SoCFPGA and Nokia N900 support.
 S: Czech Republic
 
+N: Olivia Mackall
+E: olivia@selenic.com
+D: SLOB slab allocator
+
 N: Paul Mackerras
 E: paulus@samba.org
 D: PPP driver
@@ -3034,6 +3078,10 @@ S: Demonstratsii 8-382
 S: Tula 300000
 S: Russia
 
+N: Thomas Petazzoni
+E: thomas.petazzoni@bootlin.com
+D: Driver for the Marvell Armada 370/XP network unit.
+
 N: Gordon Peters
 E: GordPeters@smarttech.com
 D: Isochronous receive for IEEE 1394 driver (OHCI module).
@@ -3932,6 +3980,10 @@ S: 21513 Conradia Ct
 S: Cupertino, CA 95014
 S: USA
 
+N: Manohar Vanga
+E: manohar.vanga@gmail.com
+D: VME subsystem maintainer
+
 N: Thibaut Varène
 E: hacks+kernel@slashdirt.org
 W: http://hacks.slashdirt.org/
@@ -4032,6 +4084,10 @@ D: Fixes for the NE/2-driver
 D: Miscellaneous MCA-support
 D: Cleanup of the Config-files
 
+N: Martyn Welch
+E: martyn@welchs.me.uk
+D: VME subsystem maintainer
+
 N: Matt Welsh
 E: mdw@metalab.unc.edu
 W: http://www.cs.berkeley.edu/~mdw
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/debugfs-driver-habanalabs linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-driver-habanalabs
index 042fd125fbc9..a7a432dc4015 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/debugfs-driver-habanalabs
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-driver-habanalabs
@@ -1,4 +1,4 @@
-What:           /sys/kernel/debug/accel/<n>/addr
+What:           /sys/kernel/debug/accel/<parent_device>/addr
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
@@ -8,34 +8,34 @@ Description:    Sets the device address to be used for read or write through
                 only when the IOMMU is disabled.
                 The acceptable value is a string that starts with "0x"
 
-What:           /sys/kernel/debug/accel/<n>/clk_gate
+What:           /sys/kernel/debug/accel/<parent_device>/clk_gate
 Date:           May 2020
 KernelVersion:  5.8
 Contact:        ogabbay@kernel.org
 Description:    This setting is now deprecated as clock gating is handled solely by the f/w
 
-What:           /sys/kernel/debug/accel/<n>/command_buffers
+What:           /sys/kernel/debug/accel/<parent_device>/command_buffers
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Displays a list with information about the currently allocated
                 command buffers
 
-What:           /sys/kernel/debug/accel/<n>/command_submission
+What:           /sys/kernel/debug/accel/<parent_device>/command_submission
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Displays a list with information about the currently active
                 command submissions
 
-What:           /sys/kernel/debug/accel/<n>/command_submission_jobs
+What:           /sys/kernel/debug/accel/<parent_device>/command_submission_jobs
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Displays a list with detailed information about each JOB (CB) of
                 each active command submission
 
-What:           /sys/kernel/debug/accel/<n>/data32
+What:           /sys/kernel/debug/accel/<parent_device>/data32
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
@@ -50,7 +50,7 @@ Description:    Allows the root user to read or write directly through the
                 If the IOMMU is disabled, it also allows the root user to read
                 or write from the host a device VA of a host mapped memory
 
-What:           /sys/kernel/debug/accel/<n>/data64
+What:           /sys/kernel/debug/accel/<parent_device>/data64
 Date:           Jan 2020
 KernelVersion:  5.6
 Contact:        ogabbay@kernel.org
@@ -65,7 +65,7 @@ Description:    Allows the root user to read or write 64 bit data directly
                 If the IOMMU is disabled, it also allows the root user to read
                 or write from the host a device VA of a host mapped memory
 
-What:           /sys/kernel/debug/accel/<n>/data_dma
+What:           /sys/kernel/debug/accel/<parent_device>/data_dma
 Date:           Apr 2021
 KernelVersion:  5.13
 Contact:        ogabbay@kernel.org
@@ -83,7 +83,7 @@ Description:    Allows the root user to read from the device's internal
                 workloads.
                 Only supported on GAUDI at this stage.
 
-What:           /sys/kernel/debug/accel/<n>/device
+What:           /sys/kernel/debug/accel/<parent_device>/device
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
@@ -91,14 +91,14 @@ Description:    Enables the root user to set the device to specific state.
                 Valid values are "disable", "enable", "suspend", "resume".
                 User can read this property to see the valid values
 
-What:           /sys/kernel/debug/accel/<n>/device_release_watchdog_timeout
+What:           /sys/kernel/debug/accel/<parent_device>/device_release_watchdog_timeout
 Date:           Oct 2022
 KernelVersion:  6.2
 Contact:        ttayar@habana.ai
 Description:    The watchdog timeout value in seconds for a device release upon
                 certain error cases, after which the device is reset.
 
-What:           /sys/kernel/debug/accel/<n>/dma_size
+What:           /sys/kernel/debug/accel/<parent_device>/dma_size
 Date:           Apr 2021
 KernelVersion:  5.13
 Contact:        ogabbay@kernel.org
@@ -108,7 +108,7 @@ Description:    Specify the size of the DMA transaction when using DMA to read
                 When the write is finished, the user can read the "data_dma"
                 blob
 
-What:           /sys/kernel/debug/accel/<n>/dump_razwi_events
+What:           /sys/kernel/debug/accel/<parent_device>/dump_razwi_events
 Date:           Aug 2022
 KernelVersion:  5.20
 Contact:        fkassabri@habana.ai
@@ -117,7 +117,7 @@ Description:    Dumps all razwi events to dmesg if exist.
                 the routine will clear the status register.
                 Usage: cat dump_razwi_events
 
-What:           /sys/kernel/debug/accel/<n>/dump_security_violations
+What:           /sys/kernel/debug/accel/<parent_device>/dump_security_violations
 Date:           Jan 2021
 KernelVersion:  5.12
 Contact:        ogabbay@kernel.org
@@ -125,14 +125,14 @@ Description:    Dumps all security violations to dmesg. This will also ack
                 all security violations meanings those violations will not be
                 dumped next time user calls this API
 
-What:           /sys/kernel/debug/accel/<n>/engines
+What:           /sys/kernel/debug/accel/<parent_device>/engines
 Date:           Jul 2019
 KernelVersion:  5.3
 Contact:        ogabbay@kernel.org
 Description:    Displays the status registers values of the device engines and
                 their derived idle status
 
-What:           /sys/kernel/debug/accel/<n>/i2c_addr
+What:           /sys/kernel/debug/accel/<parent_device>/i2c_addr
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
@@ -140,7 +140,7 @@ Description:    Sets I2C device address for I2C transaction that is generated
                 by the device's CPU, Not available when device is loaded with secured
                 firmware
 
-What:           /sys/kernel/debug/accel/<n>/i2c_bus
+What:           /sys/kernel/debug/accel/<parent_device>/i2c_bus
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
@@ -148,7 +148,7 @@ Description:    Sets I2C bus address for I2C transaction that is generated by
                 the device's CPU, Not available when device is loaded with secured
                 firmware
 
-What:           /sys/kernel/debug/accel/<n>/i2c_data
+What:           /sys/kernel/debug/accel/<parent_device>/i2c_data
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
@@ -157,7 +157,7 @@ Description:    Triggers an I2C transaction that is generated by the device's
                 reading from the file generates a read transaction, Not available
                 when device is loaded with secured firmware
 
-What:           /sys/kernel/debug/accel/<n>/i2c_len
+What:           /sys/kernel/debug/accel/<parent_device>/i2c_len
 Date:           Dec 2021
 KernelVersion:  5.17
 Contact:        obitton@habana.ai
@@ -165,7 +165,7 @@ Description:    Sets I2C length in bytes for I2C transaction that is generated b
                 the device's CPU, Not available when device is loaded with secured
                 firmware
 
-What:           /sys/kernel/debug/accel/<n>/i2c_reg
+What:           /sys/kernel/debug/accel/<parent_device>/i2c_reg
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
@@ -173,35 +173,35 @@ Description:    Sets I2C register id for I2C transaction that is generated by
                 the device's CPU, Not available when device is loaded with secured
                 firmware
 
-What:           /sys/kernel/debug/accel/<n>/led0
+What:           /sys/kernel/debug/accel/<parent_device>/led0
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Sets the state of the first S/W led on the device, Not available
                 when device is loaded with secured firmware
 
-What:           /sys/kernel/debug/accel/<n>/led1
+What:           /sys/kernel/debug/accel/<parent_device>/led1
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Sets the state of the second S/W led on the device, Not available
                 when device is loaded with secured firmware
 
-What:           /sys/kernel/debug/accel/<n>/led2
+What:           /sys/kernel/debug/accel/<parent_device>/led2
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Sets the state of the third S/W led on the device, Not available
                 when device is loaded with secured firmware
 
-What:           /sys/kernel/debug/accel/<n>/memory_scrub
+What:           /sys/kernel/debug/accel/<parent_device>/memory_scrub
 Date:           May 2022
 KernelVersion:  5.19
 Contact:        dhirschfeld@habana.ai
 Description:    Allows the root user to scrub the dram memory. The scrubbing
                 value can be set using the debugfs file memory_scrub_val.
 
-What:           /sys/kernel/debug/accel/<n>/memory_scrub_val
+What:           /sys/kernel/debug/accel/<parent_device>/memory_scrub_val
 Date:           May 2022
 KernelVersion:  5.19
 Contact:        dhirschfeld@habana.ai
@@ -209,7 +209,7 @@ Description:    The value to which the dram will be set to when the user
                 scrubs the dram using 'memory_scrub' debugfs file and
                 the scrubbing value when using module param 'memory_scrub'
 
-What:           /sys/kernel/debug/accel/<n>/mmu
+What:           /sys/kernel/debug/accel/<parent_device>/mmu
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
@@ -219,7 +219,7 @@ Description:    Displays the hop values and physical address for a given ASID
                 e.g. to display info about VA 0x1000 for ASID 1 you need to do:
                 echo "1 0x1000" > /sys/kernel/debug/accel/0/mmu
 
-What:           /sys/kernel/debug/accel/<n>/mmu_error
+What:           /sys/kernel/debug/accel/<parent_device>/mmu_error
 Date:           Mar 2021
 KernelVersion:  5.12
 Contact:        fkassabri@habana.ai
@@ -229,7 +229,7 @@ Description:    Check and display page fault or access violation mmu errors for
                 echo "0x200" > /sys/kernel/debug/accel/0/mmu_error
                 cat /sys/kernel/debug/accel/0/mmu_error
 
-What:           /sys/kernel/debug/accel/<n>/monitor_dump
+What:           /sys/kernel/debug/accel/<parent_device>/monitor_dump
 Date:           Mar 2022
 KernelVersion:  5.19
 Contact:        osharabi@habana.ai
@@ -243,7 +243,7 @@ Description:    Allows the root user to dump monitors status from the device's
                 This interface doesn't support concurrency in the same device.
                 Only supported on GAUDI.
 
-What:           /sys/kernel/debug/accel/<n>/monitor_dump_trig
+What:           /sys/kernel/debug/accel/<parent_device>/monitor_dump_trig
 Date:           Mar 2022
 KernelVersion:  5.19
 Contact:        osharabi@habana.ai
@@ -253,14 +253,14 @@ Description:    Triggers dump of monitor data. The value to trigger the operatio
                 When the write is finished, the user can read the "monitor_dump"
                 blob
 
-What:           /sys/kernel/debug/accel/<n>/set_power_state
+What:           /sys/kernel/debug/accel/<parent_device>/set_power_state
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Sets the PCI power state. Valid values are "1" for D0 and "2"
                 for D3Hot
 
-What:           /sys/kernel/debug/accel/<n>/skip_reset_on_timeout
+What:           /sys/kernel/debug/accel/<parent_device>/skip_reset_on_timeout
 Date:           Jun 2021
 KernelVersion:  5.13
 Contact:        ynudelman@habana.ai
@@ -268,7 +268,7 @@ Description:    Sets the skip reset on timeout option for the device. Value of
                 "0" means device will be reset in case some CS has timed out,
                 otherwise it will not be reset.
 
-What:           /sys/kernel/debug/accel/<n>/state_dump
+What:           /sys/kernel/debug/accel/<parent_device>/state_dump
 Date:           Oct 2021
 KernelVersion:  5.15
 Contact:        ynudelman@habana.ai
@@ -279,7 +279,7 @@ Description:    Gets the state dump occurring on a CS timeout or failure.
                 Writing an integer X discards X state dumps, so that the
                 next read would return X+1-st newest state dump.
 
-What:           /sys/kernel/debug/accel/<n>/stop_on_err
+What:           /sys/kernel/debug/accel/<parent_device>/stop_on_err
 Date:           Mar 2020
 KernelVersion:  5.6
 Contact:        ogabbay@kernel.org
@@ -287,13 +287,13 @@ Description:    Sets the stop-on_error option for the device engines. Value of
                 "0" is for disable, otherwise enable.
                 Relevant only for GOYA and GAUDI.
 
-What:           /sys/kernel/debug/accel/<n>/timeout_locked
+What:           /sys/kernel/debug/accel/<parent_device>/timeout_locked
 Date:           Sep 2021
 KernelVersion:  5.16
 Contact:        obitton@habana.ai
 Description:    Sets the command submission timeout value in seconds.
 
-What:           /sys/kernel/debug/accel/<n>/userptr
+What:           /sys/kernel/debug/accel/<parent_device>/userptr
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
@@ -301,7 +301,7 @@ Description:    Displays a list with information about the current user
                 pointers (user virtual addresses) that are pinned and mapped
                 to DMA addresses
 
-What:           /sys/kernel/debug/accel/<n>/userptr_lookup
+What:           /sys/kernel/debug/accel/<parent_device>/userptr_lookup
 Date:           Oct 2021
 KernelVersion:  5.15
 Contact:        ogabbay@kernel.org
@@ -309,7 +309,7 @@ Description:    Allows to search for specific user pointers (user virtual
                 addresses) that are pinned and mapped to DMA addresses, and see
                 their resolution to the specific dma address.
 
-What:           /sys/kernel/debug/accel/<n>/vm
+What:           /sys/kernel/debug/accel/<parent_device>/vm
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/debugfs-driver-qat_telemetry linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-driver-qat_telemetry
new file mode 100644
index 000000000000..eacee2072088
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-driver-qat_telemetry
@@ -0,0 +1,228 @@
+What:		/sys/kernel/debug/qat_<device>_<BDF>/telemetry/control
+Date:		March 2024
+KernelVersion:	6.8
+Contact:	qat-linux@intel.com
+Description:	(RW) Enables/disables the reporting of telemetry metrics.
+
+		Allowed values to write:
+		========================
+		* 0: disable telemetry
+		* 1: enable telemetry
+		* 2, 3, 4: enable telemetry and calculate minimum, maximum
+		  and average for each counter over 2, 3 or 4 samples
+
+		Returned values:
+		================
+		* 1-4: telemetry is enabled and running
+		* 0: telemetry is disabled
+
+		Example.
+
+		Writing '3' to this file starts the collection of
+		telemetry metrics. Samples are collected every second and
+		stored in a circular buffer of size 3. These values are then
+		used to calculate the minimum, maximum and average for each
+		counter. After enabling, counters can be retrieved through
+		the ``device_data`` file::
+
+		  echo 3 > /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/control
+
+		Writing '0' to this file stops the collection of telemetry
+		metrics::
+
+		  echo 0 > /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/control
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/kernel/debug/qat_<device>_<BDF>/telemetry/device_data
+Date:		March 2024
+KernelVersion:	6.8
+Contact:	qat-linux@intel.com
+Description:	(RO) Reports device telemetry counters.
+		Reads report metrics about performance and utilization of
+		a QAT device:
+
+		=======================	========================================
+		Field			Description
+		=======================	========================================
+		sample_cnt		number of acquisitions of telemetry data
+					from the device. Reads are performed
+					every 1000 ms.
+		pci_trans_cnt		number of PCIe partial transactions
+		max_rd_lat		maximum logged read latency [ns] (could
+					be any read operation)
+		rd_lat_acc_avg		average read latency [ns]
+		max_gp_lat		max get to put latency [ns] (only takes
+					samples for AE0)
+		gp_lat_acc_avg		average get to put latency [ns]
+		bw_in			PCIe, write bandwidth [Mbps]
+		bw_out			PCIe, read bandwidth [Mbps]
+		at_page_req_lat_avg	Address Translator(AT), average page
+					request latency [ns]
+		at_trans_lat_avg	AT, average page translation latency [ns]
+		at_max_tlb_used		AT, maximum uTLB used
+		util_cpr<N>		utilization of Compression slice N [%]
+		exec_cpr<N>		execution count of Compression slice N
+		util_xlt<N>		utilization of Translator slice N [%]
+		exec_xlt<N>		execution count of Translator slice N
+		util_dcpr<N>		utilization of Decompression slice N [%]
+		exec_dcpr<N>		execution count of Decompression slice N
+		util_pke<N>		utilization of PKE N [%]
+		exec_pke<N>		execution count of PKE N
+		util_ucs<N>		utilization of UCS slice N [%]
+		exec_ucs<N>		execution count of UCS slice N
+		util_wat<N>		utilization of Wireless Authentication
+					slice N [%]
+		exec_wat<N>		execution count of Wireless Authentication
+					slice N
+		util_wcp<N>		utilization of Wireless Cipher slice N [%]
+		exec_wcp<N>		execution count of Wireless Cipher slice N
+		util_cph<N>		utilization of Cipher slice N [%]
+		exec_cph<N>		execution count of Cipher slice N
+		util_ath<N>		utilization of Authentication slice N [%]
+		exec_ath<N>		execution count of Authentication slice N
+		=======================	========================================
+
+		The telemetry report file can be read with the following command::
+
+		  cat /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/device_data
+
+		If ``control`` is set to 1, only the current values of the
+		counters are displayed::
+
+		  <counter_name> <current>
+
+		If ``control`` is 2, 3 or 4, counters are displayed in the
+		following format::
+
+		  <counter_name> <current> <min> <max> <avg>
+
+		If a device lacks of a specific accelerator, the corresponding
+		attribute is not reported.
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/kernel/debug/qat_<device>_<BDF>/telemetry/rp_<A/B/C/D>_data
+Date:		March 2024
+KernelVersion:	6.8
+Contact:	qat-linux@intel.com
+Description:	(RW) Selects up to 4 Ring Pairs (RP) to monitor, one per file,
+		and report telemetry counters related to each.
+
+		Allowed values to write:
+		========================
+		* 0 to ``<num_rps - 1>``:
+		  Ring pair to be monitored. The value of ``num_rps`` can be
+		  retrieved through ``/sys/bus/pci/devices/<BDF>/qat/num_rps``.
+		  See Documentation/ABI/testing/sysfs-driver-qat.
+
+		Reads report metrics about performance and utilization of
+		the selected RP:
+
+		=======================	========================================
+		Field			Description
+		=======================	========================================
+		sample_cnt		number of acquisitions of telemetry data
+					from the device. Reads are performed
+					every 1000 ms
+		rp_num			RP number associated with slot <A/B/C/D>
+		service_type		service associated to the RP
+		pci_trans_cnt		number of PCIe partial transactions
+		gp_lat_acc_avg		average get to put latency [ns]
+		bw_in			PCIe, write bandwidth [Mbps]
+		bw_out			PCIe, read bandwidth [Mbps]
+		at_glob_devtlb_hit	Message descriptor DevTLB hit rate
+		at_glob_devtlb_miss	Message descriptor DevTLB miss rate
+		tl_at_payld_devtlb_hit	Payload DevTLB hit rate
+		tl_at_payld_devtlb_miss	Payload DevTLB miss rate
+		======================= ========================================
+
+		Example.
+
+		Writing the value '32' to the file ``rp_C_data`` starts the
+		collection of telemetry metrics for ring pair 32::
+
+		  echo 32 > /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/rp_C_data
+
+		Once a ring pair is selected, statistics can be read accessing
+		the file::
+
+		  cat /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/rp_C_data
+
+		If ``control`` is set to 1, only the current values of the
+		counters are displayed::
+
+		  <counter_name> <current>
+
+		If ``control`` is 2, 3 or 4, counters are displayed in the
+		following format::
+
+		  <counter_name> <current> <min> <max> <avg>
+
+
+		On QAT GEN4 devices there are 64 RPs on a PF, so the allowed
+		values are 0..63. This number is absolute to the device.
+		If Virtual Functions (VF) are used, the ring pair number can
+		be derived from the Bus, Device, Function of the VF:
+
+		============ ====== ====== ====== ======
+		PCI BDF/VF   RP0    RP1    RP2    RP3
+		============ ====== ====== ====== ======
+		0000:6b:0.1  RP  0  RP  1  RP  2  RP  3
+		0000:6b:0.2  RP  4  RP  5  RP  6  RP  7
+		0000:6b:0.3  RP  8  RP  9  RP 10  RP 11
+		0000:6b:0.4  RP 12  RP 13  RP 14  RP 15
+		0000:6b:0.5  RP 16  RP 17  RP 18  RP 19
+		0000:6b:0.6  RP 20  RP 21  RP 22  RP 23
+		0000:6b:0.7  RP 24  RP 25  RP 26  RP 27
+		0000:6b:1.0  RP 28  RP 29  RP 30  RP 31
+		0000:6b:1.1  RP 32  RP 33  RP 34  RP 35
+		0000:6b:1.2  RP 36  RP 37  RP 38  RP 39
+		0000:6b:1.3  RP 40  RP 41  RP 42  RP 43
+		0000:6b:1.4  RP 44  RP 45  RP 46  RP 47
+		0000:6b:1.5  RP 48  RP 49  RP 50  RP 51
+		0000:6b:1.6  RP 52  RP 53  RP 54  RP 55
+		0000:6b:1.7  RP 56  RP 57  RP 58  RP 59
+		0000:6b:2.0  RP 60  RP 61  RP 62  RP 63
+		============ ====== ====== ====== ======
+
+		The mapping is only valid for the BDFs of VFs on the host.
+
+
+		The service provided on a ring-pair varies depending on the
+		configuration. The configuration for a given device can be
+		queried and set using ``cfg_services``.
+		See Documentation/ABI/testing/sysfs-driver-qat for details.
+
+		The following table reports how ring pairs are mapped to VFs
+		on the PF 0000:6b:0.0 configured for `sym;asym` or `asym;sym`:
+
+		=========== ============ =========== ============ ===========
+		PCI BDF/VF  RP0/service  RP1/service RP2/service  RP3/service
+		=========== ============ =========== ============ ===========
+		0000:6b:0.1 RP 0 asym    RP 1 sym    RP 2 asym    RP 3 sym
+		0000:6b:0.2 RP 4 asym    RP 5 sym    RP 6 asym    RP 7 sym
+		0000:6b:0.3 RP 8 asym    RP 9 sym    RP10 asym    RP11 sym
+		...         ...          ...         ...          ...
+		=========== ============ =========== ============ ===========
+
+		All VFs follow the same pattern.
+
+
+		The following table reports how ring pairs are mapped to VFs on
+		the PF 0000:6b:0.0 configured for `dc`:
+
+		=========== ============ =========== ============ ===========
+		PCI BDF/VF  RP0/service  RP1/service RP2/service  RP3/service
+		=========== ============ =========== ============ ===========
+		0000:6b:0.1 RP 0 dc      RP 1 dc     RP 2 dc      RP 3 dc
+		0000:6b:0.2 RP 4 dc      RP 5 dc     RP 6 dc      RP 7 dc
+		0000:6b:0.3 RP 8 dc      RP 9 dc     RP10 dc      RP11 dc
+		...         ...          ...         ...          ...
+		=========== ============ =========== ============ ===========
+
+		The mapping of a RP to a service can be retrieved using
+		``rp2srv`` from sysfs.
+		See Documentation/ABI/testing/sysfs-driver-qat for details.
+
+		This attribute is only available for qat_4xxx devices.
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/debugfs-hisi-hpre linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-hisi-hpre
index 82abf92df429..8e8de49c5cc6 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/debugfs-hisi-hpre
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-hisi-hpre
@@ -101,7 +101,7 @@ What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/status
 Date:		Apr 2020
 Contact:	linux-crypto@vger.kernel.org
 Description:	Dump the status of the QM.
-		Four states: initiated, started, stopped and closed.
+		Two states: work, stop.
 		Available for both PF and VF, and take no other effect on HPRE.
 
 What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/diff_regs
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/debugfs-hisi-sec linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-hisi-sec
index 93c530d1bf0f..deeefe2c735e 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/debugfs-hisi-sec
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-hisi-sec
@@ -81,7 +81,7 @@ What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/status
 Date:		Apr 2020
 Contact:	linux-crypto@vger.kernel.org
 Description:	Dump the status of the QM.
-		Four states: initiated, started, stopped and closed.
+		Two states: work, stop.
 		Available for both PF and VF, and take no other effect on SEC.
 
 What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/diff_regs
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/debugfs-hisi-zip linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-hisi-zip
index fd3f314cf8d1..593714afaed2 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/debugfs-hisi-zip
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-hisi-zip
@@ -94,7 +94,7 @@ What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/status
 Date:		Apr 2020
 Contact:	linux-crypto@vger.kernel.org
 Description:	Dump the status of the QM.
-		Four states: initiated, started, stopped and closed.
+		Two states: work, stop.
 		Available for both PF and VF, and take no other effect on ZIP.
 
 What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/diff_regs
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/debugfs-vfio linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-vfio
new file mode 100644
index 000000000000..90f7c262f591
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-vfio
@@ -0,0 +1,25 @@
+What:		/sys/kernel/debug/vfio
+Date:		December 2023
+KernelVersion:	6.8
+Contact:	Longfang Liu <liulongfang@huawei.com>
+Description:	This debugfs file directory is used for debugging
+		of vfio devices, it's a common directory for all vfio devices.
+		Vfio core will create a device subdirectory under this
+		directory.
+
+What:		/sys/kernel/debug/vfio/<device>/migration
+Date:		December 2023
+KernelVersion:	6.8
+Contact:	Longfang Liu <liulongfang@huawei.com>
+Description:	This debugfs file directory is used for debugging
+		of vfio devices that support live migration.
+		The debugfs of each vfio device that supports live migration
+		could be created under this directory.
+
+What:		/sys/kernel/debug/vfio/<device>/migration/state
+Date:		December 2023
+KernelVersion:	6.8
+Contact:	Longfang Liu <liulongfang@huawei.com>
+Description:	Read the live migration status of the vfio device.
+		The contents of the state file reflects the migration state
+		relative to those defined in the vfio_device_mig_state enum
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-cdx linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-cdx
index 8c067ff99e54..e84277531414 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-cdx
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-cdx
@@ -98,6 +98,13 @@ Description:
 
 		  # echo 1 > /sys/bus/cdx/devices/.../remove
 
+What:		/sys/bus/cdx/devices/.../resource<N>
+Date:		July 2023
+Contact:	puneet.gupta@amd.com
+Description:
+		The resource binary file contains the content of the memory
+		regions. These files can be m'maped from userspace.
+
 What:		/sys/bus/cdx/devices/.../modalias
 Date:		July 2023
 Contact:	nipun.gupta@amd.com
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
index 6aa527296c71..96aafa66b4a5 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
@@ -91,3 +91,19 @@ Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(RW) Size of the trace buffer for TMC-ETR when used in SYSFS
 		mode. Writable only for TMC-ETR configurations. The value
 		should be aligned to the kernel pagesize.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/buf_modes_available
+Date:		August 2023
+KernelVersion:	6.7
+Contact:	Anshuman Khandual <anshuman.khandual@arm.com>
+Description:	(Read) Shows all supported Coresight TMC-ETR buffer modes available
+		for the users to configure explicitly. This file is avaialble only
+		for TMC ETR devices.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/buf_mode_preferred
+Date:		August 2023
+KernelVersion:	6.7
+Contact:	Anshuman Khandual <anshuman.khandual@arm.com>
+Description:	(RW) Current Coresight TMC-ETR buffer mode selected. But user could
+		only provide a mode which is supported for a given ETR device. This
+		file is available only for TMC ETR devices.
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
index 4a58e649550d..4dd49b159543 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
@@ -11,3 +11,162 @@ Description:
 		Accepts only one of the 2 values -  1 or 2.
 		1 : Generate 64 bits data
 		2 : Generate 32 bits data
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/reset_dataset
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(Write) Reset the dataset of the tpdm.
+
+		Accepts only one value -  1.
+		1 : Reset the dataset of the tpdm
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_trig_type
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the trigger type of the DSB for tpdm.
+
+		Accepts only one of the 2 values -  0 or 1.
+		0 : Set the DSB trigger type to false
+		1 : Set the DSB trigger type to true
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_trig_ts
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the trigger timestamp of the DSB for tpdm.
+
+		Accepts only one of the 2 values -  0 or 1.
+		0 : Set the DSB trigger type to false
+		1 : Set the DSB trigger type to true
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_mode
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the programming mode of the DSB for tpdm.
+
+		Accepts the value needs to be greater than 0. What data
+		bits do is listed below.
+		Bit[0:1] : Test mode control bit for choosing the inputs.
+		Bit[3] : Set to 0 for low performance mode. Set to 1 for high
+		performance mode.
+		Bit[4:8] : Select byte lane for high performance mode.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_edge/ctrl_idx
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the index number of the edge detection for the DSB
+		subunit TPDM. Since there are at most 256 edge detections, this
+		value ranges from 0 to 255.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_edge/ctrl_val
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		Write a data to control the edge detection corresponding to
+		the index number. Before writing data to this sysfs file,
+		"ctrl_idx" should be written first to configure the index
+		number of the edge detection which needs to be controlled.
+
+		Accepts only one of the following values.
+		0 - Rising edge detection
+		1 - Falling edge detection
+		2 - Rising and falling edge detection (toggle detection)
+
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_edge/ctrl_mask
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		Write a data to mask the edge detection corresponding to the index
+		number. Before writing data to this sysfs file, "ctrl_idx" should
+		be written first to configure the index number of the edge detection
+		which needs to be masked.
+
+		Accepts only one of the 2 values -  0 or 1.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_edge/edcr[0:15]
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		Read a set of the edge control value of the DSB in TPDM.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_edge/edcmr[0:7]
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		Read a set of the edge control mask of the DSB in TPDM.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_trig_patt/xpr[0:7]
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the value of the trigger pattern for the DSB
+		subunit TPDM.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_trig_patt/xpmr[0:7]
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the mask of the trigger pattern for the DSB
+		subunit TPDM.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_patt/tpr[0:7]
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the value of the pattern for the DSB subunit TPDM.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_patt/tpmr[0:7]
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the mask of the pattern for the DSB subunit TPDM.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_patt/enable_ts
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(Write) Set the pattern timestamp of DSB tpdm. Read
+		the pattern timestamp of DSB tpdm.
+
+		Accepts only one of the 2 values -  0 or 1.
+		0 : Disable DSB pattern timestamp.
+		1 : Enable DSB pattern timestamp.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_patt/set_type
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(Write) Set the pattern type of DSB tpdm. Read
+		the pattern type of DSB tpdm.
+
+		Accepts only one of the 2 values -  0 or 1.
+		0 : Set the DSB pattern type to value.
+		1 : Set the DSB pattern type to toggle.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_msr/msr[0:31]
+Date:		March 2023
+KernelVersion	6.7
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the MSR(mux select register) for the DSB subunit
+		TPDM.
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-cxl linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-cxl
index e76c3600607f..fff2581b8033 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-cxl
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-cxl
@@ -28,6 +28,23 @@ Description:
 		Payload in the CXL-2.0 specification.
 
 
+What:		/sys/bus/cxl/devices/memX/ram/qos_class
+Date:		May, 2023
+KernelVersion:	v6.8
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) For CXL host platforms that support "QoS Telemmetry"
+		this attribute conveys a comma delimited list of platform
+		specific cookies that identifies a QoS performance class
+		for the volatile partition of the CXL mem device. These
+		class-ids can be compared against a similar "qos_class"
+		published for a root decoder. While it is not required
+		that the endpoints map their local memory-class to a
+		matching platform class, mismatches are not recommended
+		and there are platform specific performance related
+		side-effects that may result. First class-id is displayed.
+
+
 What:		/sys/bus/cxl/devices/memX/pmem/size
 Date:		December, 2020
 KernelVersion:	v5.12
@@ -38,6 +55,23 @@ Description:
 		Payload in the CXL-2.0 specification.
 
 
+What:		/sys/bus/cxl/devices/memX/pmem/qos_class
+Date:		May, 2023
+KernelVersion:	v6.8
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) For CXL host platforms that support "QoS Telemmetry"
+		this attribute conveys a comma delimited list of platform
+		specific cookies that identifies a QoS performance class
+		for the persistent partition of the CXL mem device. These
+		class-ids can be compared against a similar "qos_class"
+		published for a root decoder. While it is not required
+		that the endpoints map their local memory-class to a
+		matching platform class, mismatches are not recommended
+		and there are platform specific performance related
+		side-effects that may result. First class-id is displayed.
+
+
 What:		/sys/bus/cxl/devices/memX/serial
 Date:		January, 2022
 KernelVersion:	v5.18
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-caps linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-caps
index 8757dcf41c08..a5f506f7d481 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-caps
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-caps
@@ -16,3 +16,9 @@ Description:
 		Example output in powerpc:
 		grep . /sys/bus/event_source/devices/cpu/caps/*
 		/sys/bus/event_source/devices/cpu/caps/pmu_name:POWER9
+
+		The "branch_counter_nr" in the supported platform exposes the
+		maximum number of counters which can be shown in the u64 counters
+		of PERF_SAMPLE_BRANCH_COUNTERS, while the "branch_counter_width"
+		exposes the width of each counter. Both of them can be used by
+		the perf tool to parse the logged counters in each branch.
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-i3c linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-i3c
index e5248fd67a56..c812ab180ff4 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-i3c
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-i3c
@@ -88,6 +88,21 @@ Description:
 		This entry describes the HDRCAP of the master controller
 		driving the bus.
 
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/hotjoin
+KernelVersion:  6.8
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		I3C’s Hot-Join mechanism allows an I3C Device to inform the
+		Active Controller that a newly-joined Target is present on the
+		I3C Bus and is ready to receive a Dynamic Address, in order to
+		become fully functional on the Bus. Hot-Join is used when the
+		Target is mounted on the same I3C bus and remains depowered
+		until needed or until the Target is physically inserted into the
+		I3C bus
+
+		This entry allows to enable or disable Hot-join of the Current
+		Controller driving the bus.
+
 What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>
 KernelVersion:  5.0
 Contact:	linux-i3c@vger.kernel.org
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-iio linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-iio
index 19cde14f3869..2e6d5ebfd3c7 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-iio
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-iio
@@ -362,10 +362,21 @@ Description:
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_peak_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_peak_raw
 KernelVersion:	2.6.36
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Highest value since some reset condition.  These
+		Highest value since some reset condition. These
+		attributes allow access to this and are otherwise
+		the direct equivalent of the <type>Y[_name]_raw attributes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_trough_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_trough_raw
+KernelVersion:	6.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lowest value since some reset condition. These
 		attributes allow access to this and are otherwise
 		the direct equivalent of the <type>Y[_name]_raw attributes.
 
@@ -618,7 +629,9 @@ KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
 		If a discrete set of scale values is available, they
-		are listed in this attribute.
+		are listed in this attribute. Unlike illumination,
+		multiplying intensity by intensity_scale does not
+		yield value with any standardized unit.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain
@@ -1574,6 +1587,8 @@ What:		/sys/.../iio:deviceX/in_intensityY_raw
 What:		/sys/.../iio:deviceX/in_intensityY_ir_raw
 What:		/sys/.../iio:deviceX/in_intensityY_both_raw
 What:		/sys/.../iio:deviceX/in_intensityY_uv_raw
+What:		/sys/.../iio:deviceX/in_intensityY_uva_raw
+What:		/sys/.../iio:deviceX/in_intensityY_uvb_raw
 What:		/sys/.../iio:deviceX/in_intensityY_duv_raw
 KernelVersion:	3.4
 Contact:	linux-iio@vger.kernel.org
@@ -1582,8 +1597,9 @@ Description:
 		that measurements contain visible and infrared light
 		components or just infrared light, respectively. Modifier
 		uv indicates that measurements contain ultraviolet light
-		components. Modifier duv indicates that measurements
-		contain deep ultraviolet light components.
+		components. Modifiers uva, uvb and duv indicate that
+		measurements contain A, B or deep (C) ultraviolet light
+		components respectively.
 
 What:		/sys/.../iio:deviceX/in_uvindex_input
 KernelVersion:	4.6
@@ -2254,3 +2270,21 @@ Description:
 		If a label is defined for this event add that to the event
 		specific attributes. This is useful for userspace to be able to
 		better identify an individual event.
+
+What:		/sys/.../events/in_accel_gesture_tap_wait_timeout
+KernelVersion:	6.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Enable tap gesture confirmation with timeout.
+
+What:		/sys/.../events/in_accel_gesture_tap_wait_dur
+KernelVersion:	6.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Timeout value in seconds for tap gesture confirmation.
+
+What:		/sys/.../events/in_accel_gesture_tap_wait_dur_available
+KernelVersion:	6.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		List of available timeout value for tap gesture confirmation.
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
index c800621eff95..9ed5582ddea2 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
@@ -25,6 +25,9 @@ KernelVersion:	5.14
 Contact:	linux-mtd@lists.infradead.org
 Description:	(RO) Part name of the SPI NOR flash.
 
+		The attribute is optional. User space should not rely on
+		it to be present or even correct. Instead, user space
+		should read the jedec_id attribute.
 
 What:		/sys/bus/spi/devices/.../spi-nor/sfdp
 Date:		April 2021
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-class-devfreq linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-devfreq
index 5e6b74f30406..1e7e0bb4c14e 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-class-devfreq
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-devfreq
@@ -52,6 +52,9 @@ Description:
 
 			echo 0 > /sys/class/devfreq/.../trans_stat
 
+		If the transition table is bigger than PAGE_SIZE, reading
+		this will return an -EFBIG error.
+
 What:		/sys/class/devfreq/.../available_frequencies
 Date:		October 2012
 Contact:	Nishanth Menon <nm@ti.com>
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-class-hwmon linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-hwmon
index 638f4c6d4ec7..3dac923c9b0e 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-class-hwmon
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-hwmon
@@ -381,6 +381,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/tempY_max_alarm
+Description:
+		Maximum temperature alarm flag.
+
+		- 0: OK
+		- 1: temperature has reached tempY_max
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/tempY_min
 Description:
 		Temperature min value.
@@ -389,6 +398,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/tempY_min_alarm
+Description:
+		Minimum temperature alarm flag.
+
+		- 0: OK
+		- 1: temperature has reached tempY_min
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/tempY_max_hyst
 Description:
 		Temperature hysteresis value for max limit.
@@ -434,12 +452,7 @@ Description:
 		- 0: OK
 		- 1: temperature has reached tempY_crit
 
-		RW
-
-		Contrary to regular alarm flags which clear themselves
-		automatically when read, this one sticks until cleared by
-		the user. This is done by writing 0 to the file. Writing
-		other values is unsupported.
+		RO
 
 What:		/sys/class/hwmon/hwmonX/tempY_crit_hyst
 Description:
@@ -462,6 +475,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/tempY_emergency_alarm
+Description:
+		Emergency high temperature alarm flag.
+
+		- 0: OK
+		- 1: temperature has reached tempY_emergency
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/tempY_emergency_hyst
 Description:
 		Temperature hysteresis value for emergency limit.
@@ -887,15 +909,15 @@ Description:
 
 		RW
 
-What:		/sys/class/hwmon/hwmonX/humidityY_input
+What:		/sys/class/hwmon/hwmonX/humidityY_alarm
 Description:
-		Humidity
+		Humidity limit detection
 
-		Unit: milli-percent (per cent mille, pcm)
+		- 0: OK
+		- 1: Humidity limit has been reached
 
 		RO
 
-
 What:		/sys/class/hwmon/hwmonX/humidityY_enable
 Description:
 		Enable or disable the sensors
@@ -908,6 +930,74 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/humidityY_fault
+Description:
+		Reports a humidity sensor failure.
+
+		- 1: Failed
+		- 0: Ok
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/humidityY_input
+Description:
+		Humidity
+
+		Unit: milli-percent (per cent mille, pcm)
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/humidityY_label
+Description:
+		Suggested humidity channel label.
+
+		Text string
+
+		Should only be created if the driver has hints about what
+		this humidity channel is being used for, and user-space
+		doesn't. In all other cases, the label is provided by
+		user-space.
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/humidityY_max
+Description:
+		Humidity max value.
+
+		Unit: milli-percent (per cent mille, pcm)
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/humidityY_max_hyst
+Description:
+		Humidity hysteresis value for max limit.
+
+		Unit: milli-percent (per cent mille, pcm)
+
+		Must be reported as an absolute humidity, NOT a delta
+		from the max value.
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/humidityY_min
+Description:
+		Humidity min value.
+
+		Unit: milli-percent (per cent mille, pcm)
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/humidityY_min_hyst
+Description:
+		Humidity hysteresis value for min limit.
+
+		Unit: milli-percent (per cent mille, pcm)
+
+		Must be reported as an absolute humidity, NOT a delta
+		from the min value.
+
+		RW
+
 What:		/sys/class/hwmon/hwmonX/humidityY_rated_min
 Description:
 		Minimum rated humidity.
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-netdev linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
index f6d9d72ce77b..a6c307c4befa 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
@@ -114,6 +114,45 @@ Description:
 		speed of 1000Mbps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+What:		/sys/class/leds/<led>/link_2500
+Date:		Nov 2023
+KernelVersion:	6.8
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 2500Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 2500Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/link_5000
+Date:		Nov 2023
+KernelVersion:	6.8
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 5000Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 5000Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/link_10000
+Date:		Nov 2023
+KernelVersion:	6.8
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 10000Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 10000Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
 What:		/sys/class/leds/<led>/half_duplex
 Date:		Jun 2023
 KernelVersion:	6.5
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-tty linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-tty
index 2bf6b24e781b..30cef9ac0f49 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-tty
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-tty
@@ -4,3 +4,59 @@ KernelVersion:	5.10
 Contact:	linux-leds@vger.kernel.org
 Description:
 		Specifies the tty device name of the triggering tty
+
+What:		/sys/class/leds/<led>/rx
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		Signal reception (rx) of data on the named tty device.
+		If set to 0, the LED will not blink on reception.
+		If set to 1 (default), the LED will blink on reception.
+
+What:		/sys/class/leds/<led>/tx
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		Signal transmission (tx) of data on the named tty device.
+		If set to 0, the LED will not blink on transmission.
+		If set to 1 (default), the LED will blink on transmission.
+
+What:		/sys/class/leds/<led>/cts
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		CTS = Clear To Send
+		DCE is ready to accept data from the DTE.
+		If the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate CTS.
+		If set to 1, the LED will evaluate CTS.
+
+What:		/sys/class/leds/<led>/dsr
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		DSR = Data Set Ready
+		DCE is ready to receive and send data.
+		If the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate DSR.
+		If set to 1, the LED will evaluate DSR.
+
+What:		/sys/class/leds/<led>/dcd
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		DCD = Data Carrier Detect
+		DTE is receiving a carrier from the DCE.
+		If the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate CAR (DCD).
+		If set to 1, the LED will evaluate CAR (DCD).
+
+What:		/sys/class/leds/<led>/rng
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		RNG = Ring Indicator
+		DCE has detected an incoming ring signal on the telephone
+		line. If the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate RNG.
+		If set to 1, the LED will evaluate RNG.
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-class-net-queues linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-net-queues
index 906ff3ca928a..5bff64d256c2 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-class-net-queues
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-net-queues
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
 Date:		March 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -8,7 +8,7 @@ Description:
 		network device queue. Possible values depend on the number
 		of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
 Date:		April 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -16,7 +16,7 @@ Description:
 		Number of Receive Packet Steering flows being currently
 		processed by this particular network device receive queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -24,7 +24,7 @@ Description:
 		Indicates the number of transmit timeout events seen by this
 		network interface transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
 Date:		March 2015
 KernelVersion:	4.1
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		A Mbps max-rate set for the queue, a value of zero means disabled,
 		default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
 Date:		November 2010
 KernelVersion:	2.6.38
 Contact:	netdev@vger.kernel.org
@@ -42,7 +42,7 @@ Description:
 		network device transmit queue. Possible values depend on the
 		number of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
 Date:		June 2018
 KernelVersion:	4.18.0
 Contact:	netdev@vger.kernel.org
@@ -53,7 +53,7 @@ Description:
 		number of available receive queue(s) in the network device.
 		Default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -62,7 +62,7 @@ Description:
 		of this particular network device transmit queue.
 		Default value is 1000.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -70,7 +70,7 @@ Description:
 		Indicates the number of bytes (objects) in flight on this
 		network device transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -79,7 +79,7 @@ Description:
 		on this network device transmit queue. This value is clamped
 		to be within the bounds defined by limit_max and limit_min.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -88,7 +88,7 @@ Description:
 		queued on this network device transmit queue. See
 		include/linux/dynamic_queue_limits.h for the default value.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-class-net-statistics linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
index 55db27815361..53e508c6936a 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/statistics/collisions
+What:		/sys/class/net/<iface>/statistics/collisions
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -6,7 +6,7 @@ Description:
 		Indicates the number of collisions seen by this network device.
 		This value might not be relevant with all MAC layers.
 
-What:		/sys/class/<iface>/statistics/multicast
+What:		/sys/class/net/<iface>/statistics/multicast
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -14,7 +14,7 @@ Description:
 		Indicates the number of multicast packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/rx_bytes
+What:		/sys/class/net/<iface>/statistics/rx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -23,7 +23,7 @@ Description:
 		See the network driver for the exact meaning of when this
 		value is incremented.
 
-What:		/sys/class/<iface>/statistics/rx_compressed
+What:		/sys/class/net/<iface>/statistics/rx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		network device. This value might only be relevant for interfaces
 		that support packet compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/rx_crc_errors
+What:		/sys/class/net/<iface>/statistics/rx_crc_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -41,7 +41,7 @@ Description:
 		by this network device. Note that the specific meaning might
 		depend on the MAC layer used by the interface.
 
-What:		/sys/class/<iface>/statistics/rx_dropped
+What:		/sys/class/net/<iface>/statistics/rx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -51,7 +51,7 @@ Description:
 		packet processing. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_errors
+What:		/sys/class/net/<iface>/statistics/rx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -59,7 +59,7 @@ Description:
 		Indicates the number of receive errors on this network device.
 		See the network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/rx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -68,7 +68,7 @@ Description:
 		network device. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_frame_errors
+What:		/sys/class/net/<iface>/statistics/rx_frame_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -78,7 +78,7 @@ Description:
 		on the MAC layer protocol used. See the network driver for
 		the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_length_errors
+What:		/sys/class/net/<iface>/statistics/rx_length_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -87,7 +87,7 @@ Description:
 		error, oversized or undersized. See the network driver for the
 		exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_missed_errors
+What:		/sys/class/net/<iface>/statistics/rx_missed_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -96,7 +96,7 @@ Description:
 		due to lack of capacity in the receive side. See the network
 		driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_nohandler
+What:		/sys/class/net/<iface>/statistics/rx_nohandler
 Date:		February 2016
 KernelVersion:	4.6
 Contact:	netdev@vger.kernel.org
@@ -104,7 +104,7 @@ Description:
 		Indicates the number of received packets that were dropped on
 		an inactive device by the network core.
 
-What:		/sys/class/<iface>/statistics/rx_over_errors
+What:		/sys/class/net/<iface>/statistics/rx_over_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -114,7 +114,7 @@ Description:
 		(e.g: larger than MTU). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_packets
+What:		/sys/class/net/<iface>/statistics/rx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -122,7 +122,7 @@ Description:
 		Indicates the total number of good packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/tx_aborted_errors
+What:		/sys/class/net/<iface>/statistics/tx_aborted_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -132,7 +132,7 @@ Description:
 		a medium collision). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_bytes
+What:		/sys/class/net/<iface>/statistics/tx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -143,7 +143,7 @@ Description:
 		transmitted packets or all packets that have been queued for
 		transmission.
 
-What:		/sys/class/<iface>/statistics/tx_carrier_errors
+What:		/sys/class/net/<iface>/statistics/tx_carrier_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -152,7 +152,7 @@ Description:
 		because of carrier errors (e.g: physical link down). See the
 		network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_compressed
+What:		/sys/class/net/<iface>/statistics/tx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -161,7 +161,7 @@ Description:
 		this might only be relevant for devices that support
 		compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/tx_dropped
+What:		/sys/class/net/<iface>/statistics/tx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -170,7 +170,7 @@ Description:
 		See the driver for the exact reasons as to why the packets were
 		dropped.
 
-What:		/sys/class/<iface>/statistics/tx_errors
+What:		/sys/class/net/<iface>/statistics/tx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -179,7 +179,7 @@ Description:
 		a network device. See the driver for the exact reasons as to
 		why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/tx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -188,7 +188,7 @@ Description:
 		FIFO error. See the driver for the exact reasons as to why the
 		packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_heartbeat_errors
+What:		/sys/class/net/<iface>/statistics/tx_heartbeat_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -197,7 +197,7 @@ Description:
 		reported as heartbeat errors. See the driver for the exact
 		reasons as to why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_packets
+What:		/sys/class/net/<iface>/statistics/tx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -206,7 +206,7 @@ Description:
 		device. See the driver for whether this reports the number of all
 		attempted or successful transmissions.
 
-What:		/sys/class/<iface>/statistics/tx_window_errors
+What:		/sys/class/net/<iface>/statistics/tx_window_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs
index fdb4e36310fb..1666340820f7 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs
@@ -3,7 +3,7 @@ What:		/sys/devices/platform/HISI04Bx:00/chipX/linked_full_lane
 What:		/sys/devices/platform/HISI04Bx:00/chipX/crc_err_cnt
 Date:		November 2023
 KernelVersion:	6.6
-Contact:	Huisong Li <lihuisong@huawei.org>
+Contact:	Huisong Li <lihuisong@huawei.com>
 Description:
 		The /sys/devices/platform/HISI04Bx:00/chipX/ directory
 		contains read-only attributes exposing some summarization
@@ -26,7 +26,7 @@ What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/linked_full_lane
 What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/crc_err_cnt
 Date:		November 2023
 KernelVersion:	6.6
-Contact:	Huisong Li <lihuisong@huawei.org>
+Contact:	Huisong Li <lihuisong@huawei.com>
 Description:
 		The /sys/devices/platform/HISI04Bx:00/chipX/dieY/ directory
 		contains read-only attributes exposing some summarization
@@ -54,7 +54,7 @@ What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/lane_mask
 What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/crc_err_cnt
 Date:		November 2023
 KernelVersion:	6.6
-Contact:	Huisong Li <lihuisong@huawei.org>
+Contact:	Huisong Li <lihuisong@huawei.com>
 Description:
 		The /sys/devices/platform/HISI04Bx/chipX/dieX/hccsN/ directory
 		contains read-only attributes exposing information about
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-driver-habanalabs linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-driver-habanalabs
index c63ca1ad500d..4244f5af4b54 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-driver-habanalabs
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-driver-habanalabs
@@ -149,6 +149,18 @@ Contact:        ogabbay@kernel.org
 Description:    Displays the current clock frequency, in Hz, of the MME compute
                 engine. This property is valid only for the Goya ASIC family
 
+What:           /sys/class/accel/accel<n>/device/module_id
+Date:           Nov 2023
+KernelVersion:  not yet upstreamed
+Contact:        ogabbay@kernel.org
+Description:    Displays the device's module id
+
+What:           /sys/class/accel/accel<n>/device/parent_device
+Date:           Nov 2023
+KernelVersion:  6.8
+Contact:        ttayar@habana.ai
+Description:    Displays the name of the parent device of the accel device
+
 What:           /sys/class/accel/accel<n>/device/pci_addr
 Date:           Jan 2019
 KernelVersion:  5.1
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 8d7d8f05f6cd..92fe7c5c5ac1 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -1,4 +1,4 @@
-What:		/sys/devices/.../hwmon/hwmon<i>/in0_input
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/in0_input
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -6,7 +6,7 @@ Description:	RO. Current Voltage in millivolt.
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_max
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -20,7 +20,7 @@ Description:	RW. Card reactive sustained  (PL1/Tau) power limit in microwatts.
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_rated_max
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_rated_max
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -28,7 +28,7 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max_interval
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -37,7 +37,7 @@ Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_crit
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -50,7 +50,7 @@ Description:	RW. Card reactive critical (I1) power limit in microwatts.
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/curr1_crit
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -63,7 +63,7 @@ Description:	RW. Card reactive critical (I1) power limit in milliamperes.
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/energy1_input
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
new file mode 100644
index 000000000000..023fd82de3f7
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
@@ -0,0 +1,70 @@
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max
+Date:		September 2023
+KernelVersion:	6.5
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RW. Card reactive sustained  (PL1) power limit in microwatts.
+
+		The power controller will throttle the operating frequency
+		if the power averaged over a window (typically seconds)
+		exceeds this limit. A read value of 0 means that the PL1
+		power limit is disabled, writing 0 disables the
+		limit. Writing values > 0 and <= TDP will enable the power limit.
+
+		Only supported for particular Intel xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_rated_max
+Date:		September 2023
+KernelVersion:	6.5
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RO. Card default power limit (default TDP setting).
+
+		Only supported for particular Intel xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_crit
+Date:		September 2023
+KernelVersion:	6.5
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in microwatts.
+
+		Card reactive critical (I1) power limit in microwatts is exposed
+		for client products. The power controller will throttle the
+		operating frequency if the power averaged over a window exceeds
+		this limit.
+
+		Only supported for particular Intel xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/curr1_crit
+Date:		September 2023
+KernelVersion:	6.5
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in milliamperes.
+
+		Card reactive critical (I1) power limit in milliamperes is
+		exposed for server products. The power controller will throttle
+		the operating frequency if the power averaged over a window
+		exceeds this limit.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/in0_input
+Date:		September 2023
+KernelVersion:	6.5
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RO. Current Voltage in millivolt.
+
+		Only supported for particular Intel xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/energy1_input
+Date:		September 2023
+KernelVersion:	6.5
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RO. Energy input of device in microjoules.
+
+		Only supported for particular Intel xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max_interval
+Date:		October 2023
+KernelVersion:	6.6
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
+		milliseconds over which sustained power is averaged.
+
+		Only supported for particular Intel xe graphics platforms.
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-driver-ufs linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-driver-ufs
index 0c7efaf62de0..5bf7073b4f75 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-driver-ufs
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-driver-ufs
@@ -1223,6 +1223,55 @@ Description:	This file shows the total latency (in micro seconds) of write
 
 		The file is read only.
 
+What:		/sys/bus/platform/drivers/ufshcd/*/power_info/lane
+What:		/sys/bus/platform/devices/*.ufs/power_info/lane
+Date:		September 2023
+Contact:	Can Guo <quic_cang@quicinc.com>
+Description:	This file shows how many lanes are enabled on the UFS link,
+		i.e., an output 2 means UFS link is operating with 2 lanes.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/power_info/mode
+What:		/sys/bus/platform/devices/*.ufs/power_info/mode
+Date:		September 2023
+Contact:	Can Guo <quic_cang@quicinc.com>
+Description:	This file shows the PA power mode of UFS.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/power_info/rate
+What:		/sys/bus/platform/devices/*.ufs/power_info/rate
+Date:		September 2023
+Contact:	Can Guo <quic_cang@quicinc.com>
+Description:	This file shows the speed rate of UFS link.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/power_info/gear
+What:		/sys/bus/platform/devices/*.ufs/power_info/gear
+Date:		September 2023
+Contact:	Can Guo <quic_cang@quicinc.com>
+Description:	This file shows the gear of UFS link.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/power_info/dev_pm
+What:		/sys/bus/platform/devices/*.ufs/power_info/dev_pm
+Date:		September 2023
+Contact:	Can Guo <quic_cang@quicinc.com>
+Description:	This file shows the UFS device power mode.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/power_info/link_state
+What:		/sys/bus/platform/devices/*.ufs/power_info/link_state
+Date:		September 2023
+Contact:	Can Guo <quic_cang@quicinc.com>
+Description:	This file shows the state of UFS link.
+
+		The file is read only.
+
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
 What:		/sys/bus/platform/devices/*.ufs/device_descriptor/wb_presv_us_en
 Date:		June 2020
@@ -1474,3 +1523,10 @@ Description:	Indicates status of Write Booster.
 
 		The file is read only.
 
+What:		/sys/bus/platform/drivers/ufshcd/*/rtc_update_ms
+What:		/sys/bus/platform/devices/*.ufs/rtc_update_ms
+Date:		November 2023
+Contact:	Bean Huo <beanhuo@micron.com>
+Description:
+		rtc_update_ms indicates how often the host should synchronize or update the
+		UFS RTC. If set to 0, this will disable UFS RTC periodic update.
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-firmware-initrd linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-firmware-initrd
new file mode 100644
index 000000000000..20bf7cf77a19
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-firmware-initrd
@@ -0,0 +1,8 @@
+What:		/sys/firmware/initrd
+Date:		December 2023
+Contact:	Alexander Graf <graf@amazon.com>
+Description:
+		When the kernel was booted with an initrd and the
+		"retain_initrd" option is set on the kernel command
+		line, /sys/firmware/initrd contains the contents of the
+		initrd that the kernel was booted with.
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-fs-f2fs linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
index 36c3cb547901..99fa87a43926 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -498,6 +498,21 @@ Description:	Show status of f2fs checkpoint in real time.
 		CP_RESIZEFS_FLAG		0x00004000
 		=============================== ==============================
 
+What:		/sys/fs/f2fs/<disk>/stat/issued_discard
+Date:		December 2023
+Contact:	"Zhiguo Niu" <zhiguo.niu@unisoc.com>
+Description:	Shows the number of issued discard.
+
+What:		/sys/fs/f2fs/<disk>/stat/queued_discard
+Date:		December 2023
+Contact:	"Zhiguo Niu" <zhiguo.niu@unisoc.com>
+Description:	Shows the number of queued discard.
+
+What:		/sys/fs/f2fs/<disk>/stat/undiscard_blks
+Date:		December 2023
+Contact:	"Zhiguo Niu" <zhiguo.niu@unisoc.com>
+Description:	Shows the total number of undiscard blocks.
+
 What:		/sys/fs/f2fs/<disk>/ckpt_thread_ioprio
 Date:		January 2021
 Contact:	"Daeho Jeong" <daehojeong@google.com>
@@ -740,3 +755,9 @@ Description:	When compress cache is on, it controls cached page
 		If cached page percent exceed threshold, then deny caching compress page.
 		The value should be in range of (0, 100], by default it was initialized
 		as 20(%).
+
+What:		/sys/fs/f2fs/<disk>/discard_io_aware
+Date:		November 2023
+Contact:	"Chao Yu" <chao@kernel.org>
+Description:	It controls to enable/disable IO aware feature for background discard.
+		By default, the value is 1 which indicates IO aware is on.
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-kernel-mm-damon linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-kernel-mm-damon
index b35649a46a2f..bfa5b8288d8d 100644
--- linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-kernel-mm-damon
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-kernel-mm-damon
@@ -25,12 +25,14 @@ Description:	Writing 'on' or 'off' to this file makes the kdamond starts or
 		stops, respectively.  Reading the file returns the keywords
 		based on the current status.  Writing 'commit' to this file
 		makes the kdamond reads the user inputs in the sysfs files
-		except 'state' again.  Writing 'update_schemes_stats' to the
-		file updates contents of schemes stats files of the kdamond.
-		Writing 'update_schemes_tried_regions' to the file updates
-		contents of 'tried_regions' directory of every scheme directory
-		of this kdamond.  Writing 'update_schemes_tried_bytes' to the
-		file updates only '.../tried_regions/total_bytes' files of this
+		except 'state' again.  Writing 'commit_schemes_quota_goals' to
+		this file makes the kdamond reads the quota goal files again.
+		Writing 'update_schemes_stats' to the file updates contents of
+		schemes stats files of the kdamond.  Writing
+		'update_schemes_tried_regions' to the file updates contents of
+		'tried_regions' directory of every scheme directory of this
+		kdamond.  Writing 'update_schemes_tried_bytes' to the file
+		updates only '.../tried_regions/total_bytes' files of this
 		kdamond.  Writing 'clear_schemes_tried_regions' to the file
 		removes contents of the 'tried_regions' directory.
 
@@ -212,6 +214,25 @@ Contact:	SeongJae Park <sj@kernel.org>
 Description:	Writing to and reading from this file sets and gets the quotas
 		charge reset interval of the scheme in milliseconds.
 
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/goals/nr_goals
+Date:		Nov 2023
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing a number 'N' to this file creates the number of
+		directories for setting automatic tuning of the scheme's
+		aggressiveness named '0' to 'N-1' under the goals/ directory.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/goals/<G>/target_value
+Date:		Nov 2023
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the target
+		value of the goal metric.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/goals/<G>/current_value
+Date:		Nov 2023
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the current
+		value of the goal metric.
+
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/weights/sz_permil
 Date:		Mar 2022
 Contact:	SeongJae Park <sj@kernel.org>
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-nvmem-cells linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-nvmem-cells
new file mode 100644
index 000000000000..c7c9444f92a8
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-nvmem-cells
@@ -0,0 +1,21 @@
+What:		/sys/bus/nvmem/devices/.../cells/<cell-name>
+Date:		May 2023
+KernelVersion:	6.5
+Contact:	Miquel Raynal <miquel.raynal@bootlin.com>
+Description:
+		The "cells" folder contains one file per cell exposed by the
+		NVMEM device. The name of the file is: "<name>@<byte>,<bit>",
+		with <name> being the cell name and <where> its location in
+		the NVMEM device, in hexadecimal bytes and bits (without the
+		'0x' prefix, to mimic device tree node names). The length of
+		the file is the size of the cell (when known). The content of
+		the file is the binary content of the cell (may sometimes be
+		ASCII, likely without trailing character).
+		Note: This file is only present if CONFIG_NVMEM_SYSFS
+		is enabled.
+
+		Example::
+
+		  hexdump -C /sys/bus/nvmem/devices/1-00563/cells/product-name@d,0
+		  00000000  54 4e 34 38 4d 2d 50 2d  44 4e         |TN48M-P-DN|
+		  0000000a
diff --git linux-libre-6.7-gnu/Documentation/ABI/testing/sysfs-platform-silicom linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-platform-silicom
new file mode 100644
index 000000000000..4d1cc5bdbcc5
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-platform-silicom
@@ -0,0 +1,30 @@
+What:		/sys/devices/platform/silicom-platform/uc_version
+Date:		November 2023
+KernelVersion:	6.7
+Contact:	Henry Shi <henrys@silicom-usa.com>
+Description:
+		This file allows to read microcontroller firmware
+		version of current platform.
+
+What:		/sys/devices/platform/silicom-platform/power_cycle
+Date:		November 2023
+KernelVersion:	6.7
+Contact:	Henry Shi <henrys@silicom-usa.com>
+Description:
+		This file allow user to power cycle the platform.
+		Default value is 0; when set to 1, it powers down
+		the platform, waits 5 seconds, then powers on the
+		device. It returns to default value after power cycle.
+
+		0 - default value.
+
+What:		/sys/devices/platform/silicom-platform/efuse_status
+Date:		November 2023
+KernelVersion:	6.7
+Contact:	Henry Shi <henrys@silicom-usa.com>
+Description:
+		This file is read only. It returns the current
+		OTP status:
+
+		0 - not programmed.
+		1 - programmed.
diff --git linux-libre-6.7-gnu/Documentation/Makefile linux-libre-6.8-gnu/Documentation/Makefile
index 2f35793acd2a..3885bbe260eb 100644
--- linux-libre-6.7-gnu/Documentation/Makefile
+++ linux-libre-6.8-gnu/Documentation/Makefile
@@ -97,7 +97,21 @@ quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
 		cp $(if $(patsubst /%,,$(DOCS_CSS)),$(abspath $(srctree)/$(DOCS_CSS)),$(DOCS_CSS)) $(BUILDDIR)/$3/_static/; \
 	fi
 
-htmldocs:
+YNL_INDEX:=$(srctree)/Documentation/networking/netlink_spec/index.rst
+YNL_RST_DIR:=$(srctree)/Documentation/networking/netlink_spec
+YNL_YAML_DIR:=$(srctree)/Documentation/netlink/specs
+YNL_TOOL:=$(srctree)/tools/net/ynl/ynl-gen-rst.py
+
+YNL_RST_FILES_TMP := $(patsubst %.yaml,%.rst,$(wildcard $(YNL_YAML_DIR)/*.yaml))
+YNL_RST_FILES := $(patsubst $(YNL_YAML_DIR)%,$(YNL_RST_DIR)%, $(YNL_RST_FILES_TMP))
+
+$(YNL_INDEX): $(YNL_RST_FILES)
+	$(Q)$(YNL_TOOL) -o $@ -x
+
+$(YNL_RST_DIR)/%.rst: $(YNL_YAML_DIR)/%.yaml $(YNL_TOOL)
+	$(Q)$(YNL_TOOL) -i $< -o $@
+
+htmldocs: $(YNL_INDEX)
 	@$(srctree)/scripts/sphinx-pre-install --version-check
 	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
 
diff --git linux-libre-6.7-gnu/Documentation/PCI/boot-interrupts.rst linux-libre-6.8-gnu/Documentation/PCI/boot-interrupts.rst
index 2ec70121bfca..931077bb0953 100644
--- linux-libre-6.7-gnu/Documentation/PCI/boot-interrupts.rst
+++ linux-libre-6.8-gnu/Documentation/PCI/boot-interrupts.rst
@@ -61,7 +61,7 @@ Conditions
 ==========
 
 The use of threaded interrupts is the most likely condition to trigger
-this problem today. Threaded interrupts may not be reenabled after the IRQ
+this problem today. Threaded interrupts may not be re-enabled after the IRQ
 handler wakes. These "one shot" conditions mean that the threaded interrupt
 needs to keep the interrupt line masked until the threaded handler has run.
 Especially when dealing with high data rate interrupts, the thread needs to
diff --git linux-libre-6.7-gnu/Documentation/PCI/msi-howto.rst linux-libre-6.8-gnu/Documentation/PCI/msi-howto.rst
index c9400f02333b..783d30b7bb42 100644
--- linux-libre-6.7-gnu/Documentation/PCI/msi-howto.rst
+++ linux-libre-6.8-gnu/Documentation/PCI/msi-howto.rst
@@ -236,7 +236,7 @@ including a full 'lspci -v' so we can add the quirks to the kernel.
 Disabling MSIs below a bridge
 -----------------------------
 
-Some PCI bridges are not able to route MSIs between busses properly.
+Some PCI bridges are not able to route MSIs between buses properly.
 In this case, MSIs must be disabled on all devices behind the bridge.
 
 Some bridges allow you to enable MSIs by changing some bits in their
diff --git linux-libre-6.7-gnu/Documentation/RAS/ras.rst linux-libre-6.8-gnu/Documentation/RAS/ras.rst
new file mode 100644
index 000000000000..2556b397cd27
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/RAS/ras.rst
@@ -0,0 +1,26 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Reliability, Availability and Serviceability features
+=====================================================
+
+This documents different aspects of the RAS functionality present in the
+kernel.
+
+Error decoding
+---------------
+
+* x86
+
+Error decoding on AMD systems should be done using the rasdaemon tool:
+https://github.com/mchehab/rasdaemon/
+
+While the daemon is running, it would automatically log and decode
+errors. If not, one can still decode such errors by supplying the
+hardware information from the error::
+
+        $ rasdaemon -p --status <STATUS> --ipid <IPID> --smca
+
+Also, the user can pass particular family and model to decode the error
+string::
+
+        $ rasdaemon -p --status <STATUS> --ipid <IPID> --smca --family <CPU Family> --model <CPU Model> --bank <BANK_NUM>
diff --git linux-libre-6.7-gnu/Documentation/RCU/checklist.rst linux-libre-6.8-gnu/Documentation/RCU/checklist.rst
index bd3c58c44bef..2d42998a89a6 100644
--- linux-libre-6.7-gnu/Documentation/RCU/checklist.rst
+++ linux-libre-6.8-gnu/Documentation/RCU/checklist.rst
@@ -241,15 +241,22 @@ over a rather long period of time, but improvements are always welcome!
 	srcu_struct.  The rules for the expedited RCU grace-period-wait
 	primitives are the same as for their non-expedited counterparts.
 
-	If the updater uses call_rcu_tasks() or synchronize_rcu_tasks(),
-	then the readers must refrain from executing voluntary
-	context switches, that is, from blocking.  If the updater uses
-	call_rcu_tasks_trace() or synchronize_rcu_tasks_trace(), then
-	the corresponding readers must use rcu_read_lock_trace() and
-	rcu_read_unlock_trace().  If an updater uses call_rcu_tasks_rude()
-	or synchronize_rcu_tasks_rude(), then the corresponding readers
-	must use anything that disables preemption, for example,
-	preempt_disable() and preempt_enable().
+	Similarly, it is necessary to correctly use the RCU Tasks flavors:
+
+	a.	If the updater uses synchronize_rcu_tasks() or
+		call_rcu_tasks(), then the readers must refrain from
+		executing voluntary context switches, that is, from
+		blocking.
+
+	b.	If the updater uses call_rcu_tasks_trace()
+		or synchronize_rcu_tasks_trace(), then the
+		corresponding readers must use rcu_read_lock_trace()
+		and rcu_read_unlock_trace().
+
+	c.	If an updater uses call_rcu_tasks_rude() or
+		synchronize_rcu_tasks_rude(), then the corresponding
+		readers must use anything that disables preemption,
+		for example, preempt_disable() and preempt_enable().
 
 	Mixing things up will result in confusion and broken kernels, and
 	has even resulted in an exploitable security issue.  Therefore,
diff --git linux-libre-6.7-gnu/Documentation/RCU/rcu_dereference.rst linux-libre-6.8-gnu/Documentation/RCU/rcu_dereference.rst
index 3b739f6243c8..659d5913784d 100644
--- linux-libre-6.7-gnu/Documentation/RCU/rcu_dereference.rst
+++ linux-libre-6.8-gnu/Documentation/RCU/rcu_dereference.rst
@@ -3,13 +3,26 @@
 PROPER CARE AND FEEDING OF RETURN VALUES FROM rcu_dereference()
 ===============================================================
 
-Most of the time, you can use values from rcu_dereference() or one of
-the similar primitives without worries.  Dereferencing (prefix "*"),
-field selection ("->"), assignment ("="), address-of ("&"), addition and
-subtraction of constants, and casts all work quite naturally and safely.
-
-It is nevertheless possible to get into trouble with other operations.
-Follow these rules to keep your RCU code working properly:
+Proper care and feeding of address and data dependencies is critically
+important to correct use of things like RCU.  To this end, the pointers
+returned from the rcu_dereference() family of primitives carry address and
+data dependencies.  These dependencies extend from the rcu_dereference()
+macro's load of the pointer to the later use of that pointer to compute
+either the address of a later memory access (representing an address
+dependency) or the value written by a later memory access (representing
+a data dependency).
+
+Most of the time, these dependencies are preserved, permitting you to
+freely use values from rcu_dereference().  For example, dereferencing
+(prefix "*"), field selection ("->"), assignment ("="), address-of
+("&"), casts, and addition or subtraction of constants all work quite
+naturally and safely.  However, because current compilers do not take
+either address or data dependencies into account it is still possible
+to get into trouble.
+
+Follow these rules to preserve the address and data dependencies emanating
+from your calls to rcu_dereference() and friends, thus keeping your RCU
+readers working properly:
 
 -	You must use one of the rcu_dereference() family of primitives
 	to load an RCU-protected pointer, otherwise CONFIG_PROVE_RCU
diff --git linux-libre-6.7-gnu/Documentation/RCU/torture.rst linux-libre-6.8-gnu/Documentation/RCU/torture.rst
index b3b6dfa85248..49e7beea6ae1 100644
--- linux-libre-6.7-gnu/Documentation/RCU/torture.rst
+++ linux-libre-6.8-gnu/Documentation/RCU/torture.rst
@@ -185,7 +185,7 @@ argument.
 Not all changes require that all scenarios be run.  For example, a change
 to Tree SRCU might run only the SRCU-N and SRCU-P scenarios using the
 --configs argument to kvm.sh as follows:  "--configs 'SRCU-N SRCU-P'".
-Large systems can run multiple copies of of the full set of scenarios,
+Large systems can run multiple copies of the full set of scenarios,
 for example, a system with 448 hardware threads can run five instances
 of the full set concurrently.  To make this happen::
 
diff --git linux-libre-6.7-gnu/Documentation/accel/introduction.rst linux-libre-6.8-gnu/Documentation/accel/introduction.rst
index 89984dfececf..ae3030136637 100644
--- linux-libre-6.7-gnu/Documentation/accel/introduction.rst
+++ linux-libre-6.8-gnu/Documentation/accel/introduction.rst
@@ -101,8 +101,8 @@ External References
 email threads
 -------------
 
-* `Initial discussion on the New subsystem for acceleration devices <https://lkml.org/lkml/2022/7/31/83>`_ - Oded Gabbay (2022)
-* `patch-set to add the new subsystem <https://lkml.org/lkml/2022/10/22/544>`_ - Oded Gabbay (2022)
+* `Initial discussion on the New subsystem for acceleration devices <https://lore.kernel.org/lkml/CAFCwf11=9qpNAepL7NL+YAV_QO=Wv6pnWPhKHKAepK3fNn+2Dg@mail.gmail.com/>`_ - Oded Gabbay (2022)
+* `patch-set to add the new subsystem <https://lore.kernel.org/lkml/20221022214622.18042-1-ogabbay@kernel.org/>`_ - Oded Gabbay (2022)
 
 Conference talks
 ----------------
diff --git linux-libre-6.7-gnu/Documentation/accel/qaic/aic100.rst linux-libre-6.8-gnu/Documentation/accel/qaic/aic100.rst
index c80d0f1307db..590dae77ea12 100644
--- linux-libre-6.7-gnu/Documentation/accel/qaic/aic100.rst
+++ linux-libre-6.8-gnu/Documentation/accel/qaic/aic100.rst
@@ -36,8 +36,9 @@ AIC100 DID (0xa100).
 
 AIC100 does not implement FLR (function level reset).
 
-AIC100 implements MSI but does not implement MSI-X. AIC100 requires 17 MSIs to
-operate (1 for MHI, 16 for the DMA Bridge).
+AIC100 implements MSI but does not implement MSI-X. AIC100 prefers 17 MSIs to
+operate (1 for MHI, 16 for the DMA Bridge). Falling back to 1 MSI is possible in
+scenarios where reserving 32 MSIs isn't feasible.
 
 As a PCIe device, AIC100 utilizes BARs to provide host interfaces to the device
 hardware. AIC100 provides 3, 64-bit BARs.
@@ -220,10 +221,14 @@ of the defined channels, and their uses.
 +----------------+---------+----------+----------------------------------------+
 | QAIC_DEBUG     | 18 & 19 | AMSS     | Not used.                              |
 +----------------+---------+----------+----------------------------------------+
-| QAIC_TIMESYNC  | 20 & 21 | SBL/AMSS | Used to synchronize timestamps in the  |
+| QAIC_TIMESYNC  | 20 & 21 | SBL      | Used to synchronize timestamps in the  |
 |                |         |          | device side logs with the host time    |
 |                |         |          | source.                                |
 +----------------+---------+----------+----------------------------------------+
+| QAIC_TIMESYNC  | 22 & 23 | AMSS     | Used to periodically synchronize       |
+| _PERIODIC      |         |          | timestamps in the device side logs with|
+|                |         |          | the host time source.                  |
++----------------+---------+----------+----------------------------------------+
 
 DMA Bridge
 ==========
diff --git linux-libre-6.7-gnu/Documentation/accel/qaic/qaic.rst linux-libre-6.8-gnu/Documentation/accel/qaic/qaic.rst
index c88502383136..efb7771273bb 100644
--- linux-libre-6.7-gnu/Documentation/accel/qaic/qaic.rst
+++ linux-libre-6.8-gnu/Documentation/accel/qaic/qaic.rst
@@ -10,6 +10,9 @@ accelerator products.
 Interrupts
 ==========
 
+IRQ Storm Mitigation
+--------------------
+
 While the AIC100 DMA Bridge hardware implements an IRQ storm mitigation
 mechanism, it is still possible for an IRQ storm to occur. A storm can happen
 if the workload is particularly quick, and the host is responsive. If the host
@@ -35,6 +38,26 @@ generates 100k IRQs per second (per /proc/interrupts) is reduced to roughly 64
 IRQs over 5 minutes while keeping the host system stable, and having the same
 workload throughput performance (within run to run noise variation).
 
+Single MSI Mode
+---------------
+
+MultiMSI is not well supported on all systems; virtualized ones even less so
+(circa 2023). Between hypervisors masking the PCIe MSI capability structure to
+large memory requirements for vIOMMUs (required for supporting MultiMSI), it is
+useful to be able to fall back to a single MSI when needed.
+
+To support this fallback, we allow the case where only one MSI is able to be
+allocated, and share that one MSI between MHI and the DBCs. The device detects
+when only one MSI has been configured and directs the interrupts for the DBCs
+to the interrupt normally used for MHI. Unfortunately this means that the
+interrupt handlers for every DBC and MHI wake up for every interrupt that
+arrives; however, the DBC threaded irq handlers only are started when work to be
+done is detected (MHI will always start its threaded handler).
+
+If the DBC is configured to force MSI interrupts, this can circumvent the
+software IRQ storm mitigation mentioned above. Since the MSI is shared it is
+never disabled, allowing each new entry to the FIFO to trigger a new interrupt.
+
 
 Neural Network Control (NNC) Protocol
 =====================================
@@ -70,8 +93,15 @@ commands (does not impact QAIC).
 uAPI
 ====
 
+QAIC creates an accel device per phsyical PCIe device. This accel device exists
+for as long as the PCIe device is known to Linux.
+
+The PCIe device may not be in the state to accept requests from userspace at
+all times. QAIC will trigger KOBJ_ONLINE/OFFLINE uevents to advertise when the
+device can accept requests (ONLINE) and when the device is no longer accepting
+requests (OFFLINE) because of a reset or other state transition.
+
 QAIC defines a number of driver specific IOCTLs as part of the userspace API.
-This section describes those APIs.
 
 DRM_IOCTL_QAIC_MANAGE
   This IOCTL allows userspace to send a NNC request to the QSM. The call will
@@ -178,3 +208,8 @@ overrides this for that call. Default is 5000 (5 seconds).
 
 Sets the polling interval in microseconds (us) when datapath polling is active.
 Takes effect at the next polling interval. Default is 100 (100 us).
+
+**timesync_delay_ms (unsigned int)**
+
+Sets the time interval in milliseconds (ms) between two consecutive timesync
+operations. Default is 1000 (1000 ms).
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/abi-obsolete.rst linux-libre-6.8-gnu/Documentation/admin-guide/abi-obsolete.rst
index d095867899c5..594e697aa1b2 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/abi-obsolete.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/abi-obsolete.rst
@@ -7,5 +7,5 @@ marked to be removed at some later point in time.
 The description of the interface will document the reason why it is
 obsolete and when it can be expected to be removed.
 
-.. kernel-abi:: $srctree/Documentation/ABI/obsolete
+.. kernel-abi:: ABI/obsolete
    :rst:
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/abi-removed.rst linux-libre-6.8-gnu/Documentation/admin-guide/abi-removed.rst
index f7e9e43023c1..f9e000c81828 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/abi-removed.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/abi-removed.rst
@@ -1,5 +1,5 @@
 ABI removed symbols
 ===================
 
-.. kernel-abi:: $srctree/Documentation/ABI/removed
+.. kernel-abi:: ABI/removed
    :rst:
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/abi-stable.rst linux-libre-6.8-gnu/Documentation/admin-guide/abi-stable.rst
index 70490736e0d3..fc3361d847b1 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/abi-stable.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/abi-stable.rst
@@ -10,5 +10,5 @@ for at least 2 years.
 Most interfaces (like syscalls) are expected to never change and always
 be available.
 
-.. kernel-abi:: $srctree/Documentation/ABI/stable
+.. kernel-abi:: ABI/stable
    :rst:
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/abi-testing.rst linux-libre-6.8-gnu/Documentation/admin-guide/abi-testing.rst
index b205b16a72d0..19767926b344 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/abi-testing.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/abi-testing.rst
@@ -16,5 +16,5 @@ Programs that use these interfaces are strongly encouraged to add their
 name to the description of these interfaces, so that the kernel
 developers can easily notify them if any changes occur.
 
-.. kernel-abi:: $srctree/Documentation/ABI/testing
+.. kernel-abi:: ABI/testing
    :rst:
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/acpi/cppc_sysfs.rst linux-libre-6.8-gnu/Documentation/admin-guide/acpi/cppc_sysfs.rst
index e53d76365aa7..36981c667823 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/acpi/cppc_sysfs.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/acpi/cppc_sysfs.rst
@@ -75,4 +75,4 @@ taking two different snapshots of feedback counters at time T1 and T2.
   delivered_counter_delta = fbc_t2[del] - fbc_t1[del]
   reference_counter_delta = fbc_t2[ref] - fbc_t1[ref]
 
-  delivered_perf = (refernce_perf x delivered_counter_delta) / reference_counter_delta
+  delivered_perf = (reference_perf x delivered_counter_delta) / reference_counter_delta
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/blockdev/zram.rst linux-libre-6.8-gnu/Documentation/admin-guide/blockdev/zram.rst
index e4551579cb12..ee2b0030d416 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/blockdev/zram.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/blockdev/zram.rst
@@ -328,7 +328,7 @@ as idle::
 From now on, any pages on zram are idle pages. The idle mark
 will be removed until someone requests access of the block.
 IOW, unless there is access request, those pages are still idle pages.
-Additionally, when CONFIG_ZRAM_MEMORY_TRACKING is enabled pages can be
+Additionally, when CONFIG_ZRAM_TRACK_ENTRY_ACTIME is enabled pages can be
 marked as idle based on how long (in seconds) it's been since they were
 last accessed::
 
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/cgroup-v2.rst linux-libre-6.8-gnu/Documentation/admin-guide/cgroup-v2.rst
index 3f85254f3cef..17e6e9565156 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/cgroup-v2.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/cgroup-v2.rst
@@ -1093,7 +1093,11 @@ All time durations are in microseconds.
 	A read-write single value file which exists on non-root
 	cgroups.  The default is "100".
 
-	The weight in the range [1, 10000].
+	For non idle groups (cpu.idle = 0), the weight is in the
+	range [1, 10000].
+
+	If the cgroup has been configured to be SCHED_IDLE (cpu.idle = 1),
+	then the weight will show as a 0.
 
   cpu.weight.nice
 	A read-write single value file which exists on non-root
@@ -1157,6 +1161,16 @@ All time durations are in microseconds.
         values similar to the sched_setattr(2). This maximum utilization
         value is used to clamp the task specific maximum utilization clamp.
 
+  cpu.idle
+	A read-write single value file which exists on non-root cgroups.
+	The default is 0.
+
+	This is the cgroup analog of the per-task SCHED_IDLE sched policy.
+	Setting this value to a 1 will make the scheduling policy of the
+	cgroup SCHED_IDLE. The threads inside the cgroup will retain their
+	own relative priorities, but the cgroup itself will be treated as
+	very low priority relative to its peers.
+
 
 
 Memory
@@ -1679,6 +1693,21 @@ PAGE_SIZE multiple when read back.
 	limit, it will refuse to take any more stores before existing
 	entries fault back in or are written out to disk.
 
+  memory.zswap.writeback
+	A read-write single value file. The default value is "1". The
+	initial value of the root cgroup is 1, and when a new cgroup is
+	created, it inherits the current value of its parent.
+
+	When this is set to 0, all swapping attempts to swapping devices
+	are disabled. This included both zswap writebacks, and swapping due
+	to zswap store failures. If the zswap store failures are recurring
+	(for e.g if the pages are incompressible), users can observe
+	reclaim inefficiency after disabling writeback (because the same
+	pages might be rejected again and again).
+
+	Note that this is subtly different from setting memory.swap.max to
+	0, as it still allows for pages to be written to the zswap pool.
+
   memory.pressure
 	A read-only nested-keyed file.
 
@@ -2316,6 +2345,13 @@ Cpuset Interface Files
 	treated to have an implicit value of "cpuset.cpus" in the
 	formation of local partition.
 
+  cpuset.cpus.isolated
+	A read-only and root cgroup only multiple values file.
+
+	This file shows the set of all isolated CPUs used in existing
+	isolated partitions. It will be empty if no isolated partition
+	is created.
+
   cpuset.cpus.partition
 	A read-write single value file which exists on non-root
 	cpuset-enabled cgroups.  This flag is owned by the parent cgroup
@@ -2358,11 +2394,11 @@ Cpuset Interface Files
 	partition or scheduling domain.  The set of exclusive CPUs is
 	determined by the value of its "cpuset.cpus.exclusive.effective".
 
-	When set to "isolated", the CPUs in that partition will
-	be in an isolated state without any load balancing from the
-	scheduler.  Tasks placed in such a partition with multiple
-	CPUs should be carefully distributed and bound to each of the
-	individual CPUs for optimal performance.
+	When set to "isolated", the CPUs in that partition will be in
+	an isolated state without any load balancing from the scheduler
+	and excluded from the unbound workqueues.  Tasks placed in such
+	a partition with multiple CPUs should be carefully distributed
+	and bound to each of the individual CPUs for optimal performance.
 
 	A partition root ("root" or "isolated") can be in one of the
 	two possible states - valid or invalid.  An invalid partition
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/cifs/todo.rst linux-libre-6.8-gnu/Documentation/admin-guide/cifs/todo.rst
index 2646ed2e2d3e..9a65c670774e 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/cifs/todo.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/cifs/todo.rst
@@ -2,7 +2,8 @@
 TODO
 ====
 
-Version 2.14 December 21, 2018
+As of 6.7 kernel. See https://wiki.samba.org/index.php/LinuxCIFSKernel
+for list of features added by release
 
 A Partial List of Missing Features
 ==================================
@@ -12,22 +13,22 @@ for visible, important contributions to this module.  Here
 is a partial list of the known problems and missing features:
 
 a) SMB3 (and SMB3.1.1) missing optional features:
+   multichannel performance optimizations, algorithmic channel selection,
+   directory leases optimizations,
+   support for faster packet signing (GMAC),
+   support for compression over the network,
+   T10 copy offload ie "ODX" (copy chunk, and "Duplicate Extents" ioctl
+   are currently the only two server side copy mechanisms supported)
 
-   - multichannel (partially integrated), integration of multichannel with RDMA
-   - directory leases (improved metadata caching). Currently only implemented for root dir
-   - T10 copy offload ie "ODX" (copy chunk, and "Duplicate Extents" ioctl
-     currently the only two server side copy mechanisms supported)
+b) Better optimized compounding and error handling for sparse file support,
+   perhaps addition of new optional SMB3.1.1 fsctls to make collapse range
+   and insert range more atomic
 
-b) improved sparse file support (fiemap and SEEK_HOLE are implemented
-   but additional features would be supportable by the protocol such
-   as FALLOC_FL_COLLAPSE_RANGE and FALLOC_FL_INSERT_RANGE)
-
-c) Directory entry caching relies on a 1 second timer, rather than
-   using Directory Leases, currently only the root file handle is cached longer
-   by leveraging Directory Leases
+c) Support for SMB3.1.1 over QUIC (and perhaps other socket based protocols
+   like SCTP)
 
 d) quota support (needs minor kernel change since quota calls otherwise
-    won't make it to network filesystems or deviceless filesystems).
+   won't make it to network filesystems or deviceless filesystems).
 
 e) Additional use cases can be optimized to use "compounding" (e.g.
    open/query/close and open/setinfo/close) to reduce the number of
@@ -92,23 +93,20 @@ t) split cifs and smb3 support into separate modules so legacy (and less
 
 v) Additional testing of POSIX Extensions for SMB3.1.1
 
-w) Add support for additional strong encryption types, and additional spnego
-   authentication mechanisms (see MS-SMB2).  GCM-256 is now partially implemented.
+w) Support for the Mac SMB3.1.1 extensions to improve interop with Apple servers
+
+x) Support for additional authentication options (e.g. IAKERB, peer-to-peer
+   Kerberos, SCRAM and others supported by existing servers)
 
-x) Finish support for SMB3.1.1 compression
+y) Improved tracing, more eBPF trace points, better scripts for performance
+   analysis
 
 Known Bugs
 ==========
 
 See https://bugzilla.samba.org - search on product "CifsVFS" for
 current bug list.  Also check http://bugzilla.kernel.org (Product = File System, Component = CIFS)
-
-1) existing symbolic links (Windows reparse points) are recognized but
-   can not be created remotely. They are implemented for Samba and those that
-   support the CIFS Unix extensions, although earlier versions of Samba
-   overly restrict the pathnames.
-2) follow_link and readdir code does not follow dfs junctions
-   but recognizes them
+and xfstest results e.g. https://wiki.samba.org/index.php/Xfstest-results-smb3
 
 Misc testing to do
 ==================
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/cifs/usage.rst linux-libre-6.8-gnu/Documentation/admin-guide/cifs/usage.rst
index 5f936b4b6018..aa8290a29dc8 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/cifs/usage.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/cifs/usage.rst
@@ -81,7 +81,7 @@ much older and less secure than the default dialect SMB3 which includes
 many advanced security features such as downgrade attack detection
 and encrypted shares and stronger signing and authentication algorithms.
 There are additional mount options that may be helpful for SMB3 to get
-improved POSIX behavior (NB: can use vers=3.0 to force only SMB3, never 2.1):
+improved POSIX behavior (NB: can use vers=3 to force SMB3 or later, never 2.1):
 
    ``mfsymlinks`` and either ``cifsacl`` or ``modefromsid`` (usually with ``idsfromsid``)
 
@@ -715,6 +715,7 @@ DebugData		Displays information about active CIFS sessions and
 Stats			Lists summary resource usage information as well as per
 			share statistics.
 open_files		List all the open file handles on all active SMB sessions.
+mount_params            List of all mount parameters available for the module
 ======================= =======================================================
 
 Configuration pseudo-files:
@@ -864,6 +865,11 @@ i.e.::
 
     echo "value" > /sys/module/cifs/parameters/<param>
 
+More detailed descriptions of the available module parameters and their values
+can be seen by doing:
+
+    modinfo cifs (or modinfo smb3)
+
 ================= ==========================================================
 1. enable_oplocks Enable or disable oplocks. Oplocks are enabled by default.
 		  [Y/y/1]. To disable use any of [N/n/0].
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/devices.txt linux-libre-6.8-gnu/Documentation/admin-guide/devices.txt
index 839054923530..94c98be1329a 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/devices.txt
+++ linux-libre-6.8-gnu/Documentation/admin-guide/devices.txt
@@ -2704,6 +2704,9 @@
 		    ...
 		 185 = /dev/ttyNX15		Hilscher netX serial port 15
 		 186 = /dev/ttyJ0		JTAG1 DCC protocol based serial port emulation
+
+		 If maximum number of uartlite serial ports is more than 4, then the driver
+		 uses dynamic allocation instead of static allocation for major number.
 		 187 = /dev/ttyUL0		Xilinx uartlite - port 0
 		    ...
 		 190 = /dev/ttyUL3		Xilinx uartlite - port 3
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/dynamic-debug-howto.rst linux-libre-6.8-gnu/Documentation/admin-guide/dynamic-debug-howto.rst
index 0c526dac8428..0e9b48daf690 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/dynamic-debug-howto.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/dynamic-debug-howto.rst
@@ -321,13 +321,13 @@ Examples
   :#> ddcmd 'format "nfsd: READ" +p'
 
   // enable messages in files of which the paths include string "usb"
-  :#> ddcmd 'file *usb* +p' > /proc/dynamic_debug/control
+  :#> ddcmd 'file *usb* +p'
 
   // enable all messages
-  :#> ddcmd '+p' > /proc/dynamic_debug/control
+  :#> ddcmd '+p'
 
   // add module, function to all enabled messages
-  :#> ddcmd '+mf' > /proc/dynamic_debug/control
+  :#> ddcmd '+mf'
 
   // boot-args example, with newlines and comments for readability
   Kernel command line: ...
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/features.rst linux-libre-6.8-gnu/Documentation/admin-guide/features.rst
index 8c167082a84f..7651eca38227 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/features.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features
+.. kernel-feat:: features
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/hw_random.rst linux-libre-6.8-gnu/Documentation/admin-guide/hw_random.rst
index d494601717f1..bfc39f1cf470 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/hw_random.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/hw_random.rst
@@ -14,10 +14,9 @@ into that core.
 
 To make the most effective use of these mechanisms, you
 should download the support software as well.  Download the
-latest version of the "rng-tools" package from the
-hw_random driver's official Web site:
+latest version of the "rng-tools" package from:
 
-	http://sourceforge.net/projects/gkernel/
+	https://github.com/nhorman/rng-tools
 
 Those tools use /dev/hwrng to fill the kernel entropy pool,
 which is used internally and exported by the /dev/urandom and
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/index.rst linux-libre-6.8-gnu/Documentation/admin-guide/index.rst
index 43ea35613dfc..fb40a1f6f79e 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/index.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/index.rst
@@ -119,6 +119,7 @@ configure specific aspects of kernel behavior to your liking.
    parport
    perf-security
    pm/index
+   pmf
    pnp
    rapidio
    ras
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst linux-libre-6.8-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
index 78e4d2e7ba14..bced9e4b6e08 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
@@ -172,7 +172,7 @@ variables.
 Offset of the free_list's member. This value is used to compute the number
 of free pages.
 
-Each zone has a free_area structure array called free_area[MAX_ORDER + 1].
+Each zone has a free_area structure array called free_area[NR_PAGE_ORDERS].
 The free_list represents a linked list of free page blocks.
 
 (list_head, next|prev)
@@ -189,11 +189,11 @@ Offsets of the vmap_area's members. They carry vmalloc-specific
 information. Makedumpfile gets the start address of the vmalloc region
 from this.
 
-(zone.free_area, MAX_ORDER + 1)
--------------------------------
+(zone.free_area, NR_PAGE_ORDERS)
+--------------------------------
 
 Free areas descriptor. User-space tools use this value to iterate the
-free_area ranges. MAX_ORDER is used by the zone buddy allocator.
+free_area ranges. NR_PAGE_ORDERS is used by the zone buddy allocator.
 
 prb
 ---
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/kernel-parameters.rst linux-libre-6.8-gnu/Documentation/admin-guide/kernel-parameters.rst
index 102937bc8443..4410384596a9 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/kernel-parameters.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/kernel-parameters.rst
@@ -218,8 +218,3 @@ bytes respectively. Such letter suffixes can also be entirely omitted:
 
 .. include:: kernel-parameters.txt
    :literal:
-
-Todo
-----
-
-	Add more DRM drivers.
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.8-gnu/Documentation/admin-guide/kernel-parameters.txt
index 65731b060e3f..31b3a25680d0 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.8-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -1,3 +1,14 @@
+	accept_memory=  [MM]
+			Format: { eager | lazy }
+			default: lazy
+			By default, unaccepted memory is accepted lazily to
+			avoid prolonged boot times. The lazy option will add
+			some runtime overhead until all memory is eventually
+			accepted. In most cases the overhead is negligible.
+			For some workloads or for debugging purposes
+			accept_memory=eager can be used to accept all memory
+			at once during boot.
+
 	acpi=		[HW,ACPI,X86,ARM64,RISCV64]
 			Advanced Configuration and Power Interface
 			Format: { force | on | off | strict | noirq | rsdt |
@@ -877,9 +888,9 @@
 			memory region [offset, offset + size] for that kernel
 			image. If '@offset' is omitted, then a suitable offset
 			is selected automatically.
-			[KNL, X86-64, ARM64, RISCV] Select a region under 4G first, and
-			fall back to reserve region above 4G when '@offset'
-			hasn't been specified.
+			[KNL, X86-64, ARM64, RISCV, LoongArch] Select a region
+			under 4G first, and fall back to reserve region above
+			4G when '@offset' hasn't been specified.
 			See Documentation/admin-guide/kdump/kdump.rst for further details.
 
 	crashkernel=range1:size1[,range2:size2,...][@offset]
@@ -890,25 +901,27 @@
 			Documentation/admin-guide/kdump/kdump.rst for an example.
 
 	crashkernel=size[KMG],high
-			[KNL, X86-64, ARM64, RISCV] range could be above 4G.
+			[KNL, X86-64, ARM64, RISCV, LoongArch] range could be
+			above 4G.
 			Allow kernel to allocate physical memory region from top,
 			so could be above 4G if system have more than 4G ram
 			installed. Otherwise memory region will be allocated
 			below 4G, if available.
 			It will be ignored if crashkernel=X is specified.
 	crashkernel=size[KMG],low
-			[KNL, X86-64, ARM64, RISCV] range under 4G. When crashkernel=X,high
-			is passed, kernel could allocate physical memory region
-			above 4G, that cause second kernel crash on system
-			that require some amount of low memory, e.g. swiotlb
-			requires at least 64M+32K low memory, also enough extra
-			low memory is needed to make sure DMA buffers for 32-bit
-			devices won't run out. Kernel would try to allocate
+			[KNL, X86-64, ARM64, RISCV, LoongArch] range under 4G.
+			When crashkernel=X,high is passed, kernel could allocate
+			physical memory region above 4G, that cause second kernel
+			crash on system that require some amount of low memory,
+			e.g. swiotlb requires at least 64M+32K low memory, also
+			enough extra low memory is needed to make sure DMA buffers
+			for 32-bit devices won't run out. Kernel would try to allocate
 			default	size of memory below 4G automatically. The default
 			size is	platform dependent.
 			  --> x86: max(swiotlb_size_or_default() + 8MiB, 256MiB)
 			  --> arm64: 128MiB
 			  --> riscv: 128MiB
+			  --> loongarch: 128MiB
 			This one lets the user specify own low range under 4G
 			for second kernel instead.
 			0: to disable low allocation.
@@ -970,17 +983,17 @@
 			buddy allocator. Bigger value increase the probability
 			of catching random memory corruption, but reduce the
 			amount of memory for normal system use. The maximum
-			possible value is MAX_ORDER/2.  Setting this parameter
-			to 1 or 2 should be enough to identify most random
-			memory corruption problems caused by bugs in kernel or
-			driver code when a CPU writes to (or reads from) a
-			random memory location. Note that there exists a class
-			of memory corruptions problems caused by buggy H/W or
-			F/W or by drivers badly programming DMA (basically when
-			memory is written at bus level and the CPU MMU is
-			bypassed) which are not detectable by
-			CONFIG_DEBUG_PAGEALLOC, hence this option will not help
-			tracking down these problems.
+			possible value is MAX_PAGE_ORDER/2.  Setting this
+			parameter to 1 or 2 should be enough to identify most
+			random memory corruption problems caused by bugs in
+			kernel or driver code when a CPU writes to (or reads
+			from) a random memory location. Note that there exists
+			a class of memory corruptions problems caused by buggy
+			H/W or F/W or by drivers badly programming DMA
+			(basically when memory is written at bus level and the
+			CPU MMU is bypassed) which are not detectable by
+			CONFIG_DEBUG_PAGEALLOC, hence this option will not
+			help tracking down these problems.
 
 	debug_pagealloc=
 			[KNL] When CONFIG_DEBUG_PAGEALLOC is set, this parameter
@@ -2438,7 +2451,7 @@
 			between unregistering the boot console and initializing
 			the real console.
 
-	keepinitrd	[HW,ARM]
+	keepinitrd	[HW,ARM] See retain_initrd.
 
 	kernelcore=	[KNL,X86,IA-64,PPC]
 			Format: nn[KMGTPE] | nn% | "mirror"
@@ -3985,9 +3998,9 @@
 			vulnerability. System may allow data leaks with this
 			option.
 
-	no-steal-acc	[X86,PV_OPS,ARM64,PPC/PSERIES] Disable paravirtualized
-			steal time accounting. steal time is computed, but
-			won't influence scheduler behaviour
+	no-steal-acc	[X86,PV_OPS,ARM64,PPC/PSERIES,RISCV] Disable
+			paravirtualized steal time accounting. steal time is
+			computed, but won't influence scheduler behaviour
 
 	nosync		[HW,M68K] Disables sync negotiation for all devices.
 
@@ -4136,7 +4149,7 @@
 			[KNL] Minimal page reporting order
 			Format: <integer>
 			Adjust the minimal page reporting order. The page
-			reporting is disabled when it exceeds MAX_ORDER.
+			reporting is disabled when it exceeds MAX_PAGE_ORDER.
 
 	panic=		[KNL] Kernel behaviour on panic: delay <timeout>
 			timeout > 0: seconds before rebooting
@@ -5302,6 +5315,12 @@
 			Dump ftrace buffer after reporting RCU CPU
 			stall warning.
 
+	rcupdate.rcu_cpu_stall_notifiers= [KNL]
+			Provide RCU CPU stall notifiers, but see the
+			warnings in the RCU_CPU_STALL_NOTIFIER Kconfig
+			option's help text.  TL;DR:  You almost certainly
+			do not want rcupdate.rcu_cpu_stall_notifiers.
+
 	rcupdate.rcu_cpu_stall_suppress= [KNL]
 			Suppress RCU CPU stall warning messages.
 
@@ -5544,6 +5563,13 @@
 			print every Nth verbose statement, where N is the value
 			specified.
 
+	regulator_ignore_unused
+			[REGULATOR]
+			Prevents regulator framework from disabling regulators
+			that are unused, due no driver claiming them. This may
+			be useful for debug and development, but should not be
+			needed on a platform with proper driver support.
+
 	relax_domain_level=
 			[KNL, SMP] Set scheduler's default relax_domain_level.
 			See Documentation/admin-guide/cgroup-v1/cpusets.rst.
@@ -5580,7 +5606,8 @@
 			Useful for devices that are detected asynchronously
 			(e.g. USB and MMC devices).
 
-	retain_initrd	[RAM] Keep initrd memory after extraction
+	retain_initrd	[RAM] Keep initrd memory after extraction. After boot, it will
+			be accessible via /sys/firmware/initrd.
 
 	retbleed=	[X86] Control mitigation of RETBleed (Arbitrary
 			Speculative Code Execution with Return Instructions)
@@ -6908,6 +6935,9 @@
 					pause after every control message);
 				o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
 					delay after resetting its port);
+				p = USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT
+					(Reduce timeout of the SET_ADDRESS
+					request from 5000 ms to 500 ms);
 			Example: quirks=0781:5580:bk,0a5c:5834:gij
 
 	usbhid.mousepoll=
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/kernel-per-CPU-kthreads.rst linux-libre-6.8-gnu/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
index 993c2a05f5ee..b6aeae3327ce 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
@@ -243,13 +243,9 @@ To reduce its OS jitter, do any of the following:
 3.	Do any of the following needed to avoid jitter that your
 	application cannot tolerate:
 
-	a.	Build your kernel with CONFIG_SLUB=y rather than
-		CONFIG_SLAB=y, thus avoiding the slab allocator's periodic
-		use of each CPU's workqueues to run its cache_reap()
-		function.
-	b.	Avoid using oprofile, thus avoiding OS jitter from
+	a.	Avoid using oprofile, thus avoiding OS jitter from
 		wq_sync_buffer().
-	c.	Limit your CPU frequency so that a CPU-frequency
+	b.	Limit your CPU frequency so that a CPU-frequency
 		governor is not required, possibly enlisting the aid of
 		special heatsinks or other cooling technologies.  If done
 		correctly, and if you CPU architecture permits, you should
@@ -259,7 +255,7 @@ To reduce its OS jitter, do any of the following:
 
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	d.	As of v3.18, Christoph Lameter's on-demand vmstat workers
+	c.	As of v3.18, Christoph Lameter's on-demand vmstat workers
 		commit prevents OS jitter due to vmstat_update() on
 		CONFIG_SMP=y systems.  Before v3.18, is not possible
 		to entirely get rid of the OS jitter, but you can
@@ -274,7 +270,7 @@ To reduce its OS jitter, do any of the following:
 		(based on an earlier one from Gilad Ben-Yossef) that
 		reduces or even eliminates vmstat overhead for some
 		workloads at https://lore.kernel.org/r/00000140e9dfd6bd-40db3d4f-c1be-434f-8132-7820f81bb586-000000@email.amazonses.com.
-	e.	If running on high-end powerpc servers, build with
+	d.	If running on high-end powerpc servers, build with
 		CONFIG_PPC_RTAS_DAEMON=n.  This prevents the RTAS
 		daemon from running on each CPU every second or so.
 		(This will require editing Kconfig files and will defeat
@@ -282,12 +278,12 @@ To reduce its OS jitter, do any of the following:
 		due to the rtas_event_scan() function.
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	f.	If running on Cell Processor, build your kernel with
+	e.	If running on Cell Processor, build your kernel with
 		CBE_CPUFREQ_SPU_GOVERNOR=n to avoid OS jitter from
 		spu_gov_work().
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	g.	If running on PowerMAC, build your kernel with
+	f.	If running on PowerMAC, build your kernel with
 		CONFIG_PMAC_RACKMETER=n to disable the CPU-meter,
 		avoiding OS jitter from rackmeter_do_timer().
 
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/media/index.rst linux-libre-6.8-gnu/Documentation/admin-guide/media/index.rst
index 43f4a292b245..be7e0e4482ca 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/media/index.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/media/index.rst
@@ -20,16 +20,8 @@ Documentation/driver-api/media/index.rst
   - for driver development information and Kernel APIs used by
     media devices;
 
-The media subsystem
-===================
-
-.. only:: html
-
-    .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+	:caption: Table of Contents
 	:maxdepth: 2
 	:numbered:
 
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/media/starfive_camss.rst linux-libre-6.8-gnu/Documentation/admin-guide/media/starfive_camss.rst
new file mode 100644
index 000000000000..ca42e9447c47
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/admin-guide/media/starfive_camss.rst
@@ -0,0 +1,72 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+================================
+Starfive Camera Subsystem driver
+================================
+
+Introduction
+------------
+
+This file documents the driver for the Starfive Camera Subsystem found on
+Starfive JH7110 SoC. The driver is located under drivers/staging/media/starfive/
+camss.
+
+The driver implements V4L2, Media controller and v4l2_subdev interfaces. Camera
+sensor using V4L2 subdev interface in the kernel is supported.
+
+The driver has been successfully used on the Gstreamer 1.18.5 with v4l2src
+plugin.
+
+
+Starfive Camera Subsystem hardware
+----------------------------------
+
+The Starfive Camera Subsystem hardware consists of::
+
+                    |\         +---------------+      +-----------+
+  +----------+      |  \       |               |      |           |
+  |          |      |   |      |               |      |           |
+  |   MIPI   |----->|   |----->|      ISP      |----->|           |
+  |          |      |   |      |               |      |           |
+  +----------+      |   |      |               |      |  Memory   |
+                    |MUX|      +---------------+      | Interface |
+  +----------+      |   |                             |           |
+  |          |      |   |---------------------------->|           |
+  | Parallel |----->|   |                             |           |
+  |          |      |   |                             |           |
+  +----------+      |  /                              |           |
+                    |/                                +-----------+
+
+- MIPI: The MIPI interface, receiving data from a MIPI CSI-2 camera sensor.
+
+- Parallel: The parallel interface,  receiving data from a parallel sensor.
+
+- ISP: The ISP, processing raw Bayer data from an image sensor and producing
+  YUV frames.
+
+
+Topology
+--------
+
+The media controller pipeline graph is as follows:
+
+.. _starfive_camss_graph:
+
+.. kernel-figure:: starfive_camss_graph.dot
+    :alt:   starfive_camss_graph.dot
+    :align: center
+
+The driver has 2 video devices:
+
+- capture_raw: The capture device, capturing image data directly from a sensor.
+- capture_yuv: The capture device, capturing YUV frame data processed by the
+  ISP module
+
+The driver has 3 subdevices:
+
+- stf_isp: is responsible for all the isp operations, outputs YUV frames.
+- cdns_csi2rx: a CSI-2 bridge supporting up to 4 CSI lanes in input, and 4
+  different pixel streams in output.
+- imx219: an image sensor, image data is sent through MIPI CSI-2.
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/media/starfive_camss_graph.dot linux-libre-6.8-gnu/Documentation/admin-guide/media/starfive_camss_graph.dot
new file mode 100644
index 000000000000..8eff1f161ac7
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/admin-guide/media/starfive_camss_graph.dot
@@ -0,0 +1,12 @@
+digraph board {
+	rankdir=TB
+	n00000001 [label="{{<port0> 0} | stf_isp\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000001:port1 -> n00000008 [style=dashed]
+	n00000004 [label="capture_raw\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
+	n00000008 [label="capture_yuv\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
+	n0000000e [label="{{<port0> 0} | cdns_csi2rx.19800000.csi-bridge\n | {<port1> 1 | <port2> 2 | <port3> 3 | <port4> 4}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000000e:port1 -> n00000001:port0 [style=dashed]
+	n0000000e:port1 -> n00000004 [style=dashed]
+	n00000018 [label="{{} | imx219 6-0010\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000018:port0 -> n0000000e:port0 [style=bold]
+}
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/media/v4l-drivers.rst linux-libre-6.8-gnu/Documentation/admin-guide/media/v4l-drivers.rst
index 61283d67ceef..f4bb2605f07e 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/media/v4l-drivers.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/media/v4l-drivers.rst
@@ -28,6 +28,7 @@ Video4Linux (V4L) driver-specific documentation
 	si470x
 	si4713
 	si476x
+	starfive_camss
 	vimc
 	visl
 	vivid
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/media/visl.rst linux-libre-6.8-gnu/Documentation/admin-guide/media/visl.rst
index 4328c6c72d30..db1ef29438e1 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/media/visl.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/media/visl.rst
@@ -71,6 +71,7 @@ The following codecs are supported:
 - VP9
 - H.264
 - HEVC
+- AV1
 
 visl trace events
 -----------------
@@ -79,6 +80,7 @@ The trace events are defined on a per-codec basis, e.g.:
 .. code-block:: bash
 
         $ ls /sys/kernel/tracing/events/ | grep visl
+        visl_av1_controls
         visl_fwht_controls
         visl_h264_controls
         visl_hevc_controls
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/mm/damon/usage.rst linux-libre-6.8-gnu/Documentation/admin-guide/mm/damon/usage.rst
index da94feb97ed1..9d23144bf985 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/mm/damon/usage.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/mm/damon/usage.rst
@@ -59,41 +59,47 @@ Files Hierarchy
 The files hierarchy of DAMON sysfs interface is shown below.  In the below
 figure, parents-children relations are represented with indentations, each
 directory is having ``/`` suffix, and files in each directory are separated by
-comma (","). ::
-
-    /sys/kernel/mm/damon/admin
-    │ kdamonds/nr_kdamonds
-    │ │ 0/state,pid
-    │ │ │ contexts/nr_contexts
-    │ │ │ │ 0/avail_operations,operations
-    │ │ │ │ │ monitoring_attrs/
+comma (",").
+
+.. parsed-literal::
+
+    :ref:`/sys/kernel/mm/damon <sysfs_root>`/admin
+    │ :ref:`kdamonds <sysfs_kdamonds>`/nr_kdamonds
+    │ │ :ref:`0 <sysfs_kdamond>`/state,pid
+    │ │ │ :ref:`contexts <sysfs_contexts>`/nr_contexts
+    │ │ │ │ :ref:`0 <sysfs_context>`/avail_operations,operations
+    │ │ │ │ │ :ref:`monitoring_attrs <sysfs_monitoring_attrs>`/
     │ │ │ │ │ │ intervals/sample_us,aggr_us,update_us
     │ │ │ │ │ │ nr_regions/min,max
-    │ │ │ │ │ targets/nr_targets
-    │ │ │ │ │ │ 0/pid_target
-    │ │ │ │ │ │ │ regions/nr_regions
-    │ │ │ │ │ │ │ │ 0/start,end
+    │ │ │ │ │ :ref:`targets <sysfs_targets>`/nr_targets
+    │ │ │ │ │ │ :ref:`0 <sysfs_target>`/pid_target
+    │ │ │ │ │ │ │ :ref:`regions <sysfs_regions>`/nr_regions
+    │ │ │ │ │ │ │ │ :ref:`0 <sysfs_region>`/start,end
     │ │ │ │ │ │ │ │ ...
     │ │ │ │ │ │ ...
-    │ │ │ │ │ schemes/nr_schemes
-    │ │ │ │ │ │ 0/action,apply_interval_us
-    │ │ │ │ │ │ │ access_pattern/
+    │ │ │ │ │ :ref:`schemes <sysfs_schemes>`/nr_schemes
+    │ │ │ │ │ │ :ref:`0 <sysfs_scheme>`/action,apply_interval_us
+    │ │ │ │ │ │ │ :ref:`access_pattern <sysfs_access_pattern>`/
     │ │ │ │ │ │ │ │ sz/min,max
     │ │ │ │ │ │ │ │ nr_accesses/min,max
     │ │ │ │ │ │ │ │ age/min,max
-    │ │ │ │ │ │ │ quotas/ms,bytes,reset_interval_ms
+    │ │ │ │ │ │ │ :ref:`quotas <sysfs_quotas>`/ms,bytes,reset_interval_ms
     │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil
-    │ │ │ │ │ │ │ watermarks/metric,interval_us,high,mid,low
-    │ │ │ │ │ │ │ filters/nr_filters
+    │ │ │ │ │ │ │ │ :ref:`goals <sysfs_schemes_quota_goals>`/nr_goals
+    │ │ │ │ │ │ │ │ │ 0/target_value,current_value
+    │ │ │ │ │ │ │ :ref:`watermarks <sysfs_watermarks>`/metric,interval_us,high,mid,low
+    │ │ │ │ │ │ │ :ref:`filters <sysfs_filters>`/nr_filters
     │ │ │ │ │ │ │ │ 0/type,matching,memcg_id
-    │ │ │ │ │ │ │ stats/nr_tried,sz_tried,nr_applied,sz_applied,qt_exceeds
-    │ │ │ │ │ │ │ tried_regions/total_bytes
+    │ │ │ │ │ │ │ :ref:`stats <sysfs_schemes_stats>`/nr_tried,sz_tried,nr_applied,sz_applied,qt_exceeds
+    │ │ │ │ │ │ │ :ref:`tried_regions <sysfs_schemes_tried_regions>`/total_bytes
     │ │ │ │ │ │ │ │ 0/start,end,nr_accesses,age
     │ │ │ │ │ │ │ │ ...
     │ │ │ │ │ │ ...
     │ │ │ │ ...
     │ │ ...
 
+.. _sysfs_root:
+
 Root
 ----
 
@@ -102,6 +108,8 @@ has one directory named ``admin``.  The directory contains the files for
 privileged user space programs' control of DAMON.  User space tools or daemons
 having the root permission could use this directory.
 
+.. _sysfs_kdamonds:
+
 kdamonds/
 ---------
 
@@ -113,6 +121,8 @@ details) exists.  In the beginning, this directory has only one file,
 child directories named ``0`` to ``N-1``.  Each directory represents each
 kdamond.
 
+.. _sysfs_kdamond:
+
 kdamonds/<N>/
 -------------
 
@@ -120,29 +130,37 @@ In each kdamond directory, two files (``state`` and ``pid``) and one directory
 (``contexts``) exist.
 
 Reading ``state`` returns ``on`` if the kdamond is currently running, or
-``off`` if it is not running.  Writing ``on`` or ``off`` makes the kdamond be
-in the state.  Writing ``commit`` to the ``state`` file makes kdamond reads the
-user inputs in the sysfs files except ``state`` file again.  Writing
-``update_schemes_stats`` to ``state`` file updates the contents of stats files
-for each DAMON-based operation scheme of the kdamond.  For details of the
-stats, please refer to :ref:`stats section <sysfs_schemes_stats>`.
-
-Writing ``update_schemes_tried_regions`` to ``state`` file updates the
-DAMON-based operation scheme action tried regions directory for each
-DAMON-based operation scheme of the kdamond.  Writing
-``update_schemes_tried_bytes`` to ``state`` file updates only
-``.../tried_regions/total_bytes`` files.  Writing
-``clear_schemes_tried_regions`` to ``state`` file clears the DAMON-based
-operating scheme action tried regions directory for each DAMON-based operation
-scheme of the kdamond.  For details of the DAMON-based operation scheme action
-tried regions directory, please refer to :ref:`tried_regions section
-<sysfs_schemes_tried_regions>`.
+``off`` if it is not running.
+
+Users can write below commands for the kdamond to the ``state`` file.
+
+- ``on``: Start running.
+- ``off``: Stop running.
+- ``commit``: Read the user inputs in the sysfs files except ``state`` file
+  again.
+- ``commit_schemes_quota_goals``: Read the DAMON-based operation schemes'
+  :ref:`quota goals <sysfs_schemes_quota_goals>`.
+- ``update_schemes_stats``: Update the contents of stats files for each
+  DAMON-based operation scheme of the kdamond.  For details of the stats,
+  please refer to :ref:`stats section <sysfs_schemes_stats>`.
+- ``update_schemes_tried_regions``: Update the DAMON-based operation scheme
+  action tried regions directory for each DAMON-based operation scheme of the
+  kdamond.  For details of the DAMON-based operation scheme action tried
+  regions directory, please refer to
+  :ref:`tried_regions section <sysfs_schemes_tried_regions>`.
+- ``update_schemes_tried_bytes``: Update only ``.../tried_regions/total_bytes``
+  files.
+- ``clear_schemes_tried_regions``: Clear the DAMON-based operating scheme
+  action tried regions directory for each DAMON-based operation scheme of the
+  kdamond.
 
 If the state is ``on``, reading ``pid`` shows the pid of the kdamond thread.
 
 ``contexts`` directory contains files for controlling the monitoring contexts
 that this kdamond will execute.
 
+.. _sysfs_contexts:
+
 kdamonds/<N>/contexts/
 ----------------------
 
@@ -153,7 +171,7 @@ number (``N``) to the file creates the number of child directories named as
 details).  At the moment, only one context per kdamond is supported, so only
 ``0`` or ``1`` can be written to the file.
 
-.. _sysfs_contexts:
+.. _sysfs_context:
 
 contexts/<N>/
 -------------
@@ -203,6 +221,8 @@ writing to and rading from the files.
 For more details about the intervals and monitoring regions range, please refer
 to the Design document (:doc:`/mm/damon/design`).
 
+.. _sysfs_targets:
+
 contexts/<N>/targets/
 ---------------------
 
@@ -210,6 +230,8 @@ In the beginning, this directory has only one file, ``nr_targets``.  Writing a
 number (``N``) to the file creates the number of child directories named ``0``
 to ``N-1``.  Each directory represents each monitoring target.
 
+.. _sysfs_target:
+
 targets/<N>/
 ------------
 
@@ -244,6 +266,8 @@ In the beginning, this directory has only one file, ``nr_regions``.  Writing a
 number (``N``) to the file creates the number of child directories named ``0``
 to ``N-1``.  Each directory represents each initial monitoring target region.
 
+.. _sysfs_region:
+
 regions/<N>/
 ------------
 
@@ -254,6 +278,8 @@ region by writing to and reading from the files, respectively.
 Each region should not overlap with others.  ``end`` of directory ``N`` should
 be equal or smaller than ``start`` of directory ``N+1``.
 
+.. _sysfs_schemes:
+
 contexts/<N>/schemes/
 ---------------------
 
@@ -265,6 +291,8 @@ In the beginning, this directory has only one file, ``nr_schemes``.  Writing a
 number (``N``) to the file creates the number of child directories named ``0``
 to ``N-1``.  Each directory represents each DAMON-based operation scheme.
 
+.. _sysfs_scheme:
+
 schemes/<N>/
 ------------
 
@@ -277,7 +305,7 @@ The ``action`` file is for setting and getting the scheme's :ref:`action
 from the file and their meaning are as below.
 
 Note that support of each action depends on the running DAMON operations set
-:ref:`implementation <sysfs_contexts>`.
+:ref:`implementation <sysfs_context>`.
 
  - ``willneed``: Call ``madvise()`` for the region with ``MADV_WILLNEED``.
    Supported by ``vaddr`` and ``fvaddr`` operations set.
@@ -299,6 +327,8 @@ Note that support of each action depends on the running DAMON operations set
 The ``apply_interval_us`` file is for setting and getting the scheme's
 :ref:`apply_interval <damon_design_damos>` in microseconds.
 
+.. _sysfs_access_pattern:
+
 schemes/<N>/access_pattern/
 ---------------------------
 
@@ -312,6 +342,8 @@ to and reading from the ``min`` and ``max`` files under ``sz``,
 ``nr_accesses``, and ``age`` directories, respectively.  Note that the ``min``
 and the ``max`` form a closed interval.
 
+.. _sysfs_quotas:
+
 schemes/<N>/quotas/
 -------------------
 
@@ -319,8 +351,7 @@ The directory for the :ref:`quotas <damon_design_damos_quotas>` of the given
 DAMON-based operation scheme.
 
 Under ``quotas`` directory, three files (``ms``, ``bytes``,
-``reset_interval_ms``) and one directory (``weights``) having three files
-(``sz_permil``, ``nr_accesses_permil``, and ``age_permil``) in it exist.
+``reset_interval_ms``) and two directores (``weights`` and ``goals``) exist.
 
 You can set the ``time quota`` in milliseconds, ``size quota`` in bytes, and
 ``reset interval`` in milliseconds by writing the values to the three files,
@@ -330,11 +361,37 @@ apply the action to only up to ``bytes`` bytes of memory regions within the
 ``reset_interval_ms``.  Setting both ``ms`` and ``bytes`` zero disables the
 quota limits.
 
-You can also set the :ref:`prioritization weights
+Under ``weights`` directory, three files (``sz_permil``,
+``nr_accesses_permil``, and ``age_permil``) exist.
+You can set the :ref:`prioritization weights
 <damon_design_damos_quotas_prioritization>` for size, access frequency, and age
 in per-thousand unit by writing the values to the three files under the
 ``weights`` directory.
 
+.. _sysfs_schemes_quota_goals:
+
+schemes/<N>/quotas/goals/
+-------------------------
+
+The directory for the :ref:`automatic quota tuning goals
+<damon_design_damos_quotas_auto_tuning>` of the given DAMON-based operation
+scheme.
+
+In the beginning, this directory has only one file, ``nr_goals``.  Writing a
+number (``N``) to the file creates the number of child directories named ``0``
+to ``N-1``.  Each directory represents each goal and current achievement.
+Among the multiple feedback, the best one is used.
+
+Each goal directory contains two files, namely ``target_value`` and
+``current_value``.  Users can set and get any number to those files to set the
+feedback.  User space main workload's latency or throughput, system metrics
+like free memory ratio or memory pressure stall time (PSI) could be example
+metrics for the values.  Note that users should write
+``commit_schemes_quota_goals`` to the ``state`` file of the :ref:`kdamond
+directory <sysfs_kdamond>` to pass the feedback to DAMON.
+
+.. _sysfs_watermarks:
+
 schemes/<N>/watermarks/
 -----------------------
 
@@ -354,6 +411,8 @@ as below.
 
 The ``interval`` should written in microseconds unit.
 
+.. _sysfs_filters:
+
 schemes/<N>/filters/
 --------------------
 
@@ -394,7 +453,7 @@ pages of all memory cgroups except ``/having_care_already``.::
     echo N > 1/matching
 
 Note that ``anon`` and ``memcg`` filters are currently supported only when
-``paddr`` :ref:`implementation <sysfs_contexts>` is being used.
+``paddr`` :ref:`implementation <sysfs_context>` is being used.
 
 Also, memory regions that are filtered out by ``addr`` or ``target`` filters
 are not counted as the scheme has tried to those, while regions that filtered
@@ -449,6 +508,8 @@ and query-like efficient data access monitoring results retrievals.  For the
 latter use case, in particular, users can set the ``action`` as ``stat`` and
 set the ``access pattern`` as their interested pattern that they want to query.
 
+.. _sysfs_schemes_tried_region:
+
 tried_regions/<N>/
 ------------------
 
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/mm/ksm.rst linux-libre-6.8-gnu/Documentation/admin-guide/mm/ksm.rst
index e59231ac6bb7..a639cac12477 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/mm/ksm.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/mm/ksm.rst
@@ -80,6 +80,9 @@ pages_to_scan
         how many pages to scan before ksmd goes to sleep
         e.g. ``echo 100 > /sys/kernel/mm/ksm/pages_to_scan``.
 
+        The pages_to_scan value cannot be changed if ``advisor_mode`` has
+        been set to scan-time.
+
         Default: 100 (chosen for demonstration purposes)
 
 sleep_millisecs
@@ -164,6 +167,29 @@ smart_scan
         optimization is enabled.  The ``pages_skipped`` metric shows how
         effective the setting is.
 
+advisor_mode
+        The ``advisor_mode`` selects the current advisor. Two modes are
+        supported: none and scan-time. The default is none. By setting
+        ``advisor_mode`` to scan-time, the scan time advisor is enabled.
+        The section about ``advisor`` explains in detail how the scan time
+        advisor works.
+
+adivsor_max_cpu
+        specifies the upper limit of the cpu percent usage of the ksmd
+        background thread. The default is 70.
+
+advisor_target_scan_time
+        specifies the target scan time in seconds to scan all the candidate
+        pages. The default value is 200 seconds.
+
+advisor_min_pages_to_scan
+        specifies the lower limit of the ``pages_to_scan`` parameter of the
+        scan time advisor. The default is 500.
+
+adivsor_max_pages_to_scan
+        specifies the upper limit of the ``pages_to_scan`` parameter of the
+        scan time advisor. The default is 30000.
+
 The effectiveness of KSM and MADV_MERGEABLE is shown in ``/sys/kernel/mm/ksm/``:
 
 general_profit
@@ -263,6 +289,35 @@ ksm_swpin_copy
 	note that KSM page might be copied when swapping in because do_swap_page()
 	cannot do all the locking needed to reconstitute a cross-anon_vma KSM page.
 
+Advisor
+=======
+
+The number of candidate pages for KSM is dynamic. It can be often observed
+that during the startup of an application more candidate pages need to be
+processed. Without an advisor the ``pages_to_scan`` parameter needs to be
+sized for the maximum number of candidate pages. The scan time advisor can
+changes the ``pages_to_scan`` parameter based on demand.
+
+The advisor can be enabled, so KSM can automatically adapt to changes in the
+number of candidate pages to scan. Two advisors are implemented: none and
+scan-time. With none, no advisor is enabled. The default is none.
+
+The scan time advisor changes the ``pages_to_scan`` parameter based on the
+observed scan times. The possible values for the ``pages_to_scan`` parameter is
+limited by the ``advisor_max_cpu`` parameter. In addition there is also the
+``advisor_target_scan_time`` parameter. This parameter sets the target time to
+scan all the KSM candidate pages. The parameter ``advisor_target_scan_time``
+decides how aggressive the scan time advisor scans candidate pages. Lower
+values make the scan time advisor to scan more aggresively. This is the most
+important parameter for the configuration of the scan time advisor.
+
+The initial value and the maximum value can be changed with
+``advisor_min_pages_to_scan`` and ``advisor_max_pages_to_scan``. The default
+values are sufficient for most workloads and use cases.
+
+The ``pages_to_scan`` parameter is re-calculated after a scan has been completed.
+
+
 --
 Izik Eidus,
 Hugh Dickins, 17 Nov 2009
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/mm/pagemap.rst linux-libre-6.8-gnu/Documentation/admin-guide/mm/pagemap.rst
index fe17cf210426..f5f065c67615 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/mm/pagemap.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/mm/pagemap.rst
@@ -253,6 +253,7 @@ Following flags about pages are currently supported:
 - ``PAGE_IS_SWAPPED`` - Page is in swapped
 - ``PAGE_IS_PFNZERO`` - Page has zero PFN
 - ``PAGE_IS_HUGE`` - Page is THP or Hugetlb backed
+- ``PAGE_IS_SOFT_DIRTY`` - Page is soft-dirty
 
 The ``struct pm_scan_arg`` is used as the argument of the IOCTL.
 
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/mm/transhuge.rst linux-libre-6.8-gnu/Documentation/admin-guide/mm/transhuge.rst
index b0cc8243e093..04eb45a2f940 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/mm/transhuge.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/mm/transhuge.rst
@@ -45,10 +45,25 @@ components:
    the two is using hugepages just because of the fact the TLB miss is
    going to run faster.
 
+Modern kernels support "multi-size THP" (mTHP), which introduces the
+ability to allocate memory in blocks that are bigger than a base page
+but smaller than traditional PMD-size (as described above), in
+increments of a power-of-2 number of pages. mTHP can back anonymous
+memory (for example 16K, 32K, 64K, etc). These THPs continue to be
+PTE-mapped, but in many cases can still provide similar benefits to
+those outlined above: Page faults are significantly reduced (by a
+factor of e.g. 4, 8, 16, etc), but latency spikes are much less
+prominent because the size of each page isn't as huge as the PMD-sized
+variant and there is less memory to clear in each page fault. Some
+architectures also employ TLB compression mechanisms to squeeze more
+entries in when a set of PTEs are virtually and physically contiguous
+and approporiately aligned. In this case, TLB misses will occur less
+often.
+
 THP can be enabled system wide or restricted to certain tasks or even
 memory ranges inside task's address space. Unless THP is completely
 disabled, there is ``khugepaged`` daemon that scans memory and
-collapses sequences of basic pages into huge pages.
+collapses sequences of basic pages into PMD-sized huge pages.
 
 The THP behaviour is controlled via :ref:`sysfs <thp_sysfs>`
 interface and using madvise(2) and prctl(2) system calls.
@@ -95,12 +110,40 @@ Global THP controls
 Transparent Hugepage Support for anonymous memory can be entirely disabled
 (mostly for debugging purposes) or only enabled inside MADV_HUGEPAGE
 regions (to avoid the risk of consuming more memory resources) or enabled
-system wide. This can be achieved with one of::
+system wide. This can be achieved per-supported-THP-size with one of::
+
+	echo always >/sys/kernel/mm/transparent_hugepage/hugepages-<size>kB/enabled
+	echo madvise >/sys/kernel/mm/transparent_hugepage/hugepages-<size>kB/enabled
+	echo never >/sys/kernel/mm/transparent_hugepage/hugepages-<size>kB/enabled
+
+where <size> is the hugepage size being addressed, the available sizes
+for which vary by system.
+
+For example::
+
+	echo always >/sys/kernel/mm/transparent_hugepage/hugepages-2048kB/enabled
+
+Alternatively it is possible to specify that a given hugepage size
+will inherit the top-level "enabled" value::
+
+	echo inherit >/sys/kernel/mm/transparent_hugepage/hugepages-<size>kB/enabled
+
+For example::
+
+	echo inherit >/sys/kernel/mm/transparent_hugepage/hugepages-2048kB/enabled
+
+The top-level setting (for use with "inherit") can be set by issuing
+one of the following commands::
 
 	echo always >/sys/kernel/mm/transparent_hugepage/enabled
 	echo madvise >/sys/kernel/mm/transparent_hugepage/enabled
 	echo never >/sys/kernel/mm/transparent_hugepage/enabled
 
+By default, PMD-sized hugepages have enabled="inherit" and all other
+hugepage sizes have enabled="never". If enabling multiple hugepage
+sizes, the kernel will select the most appropriate enabled size for a
+given allocation.
+
 It's also possible to limit defrag efforts in the VM to generate
 anonymous hugepages in case they're not immediately free to madvise
 regions or to never try to defrag memory and simply fallback to regular
@@ -146,25 +189,34 @@ madvise
 never
 	should be self-explanatory.
 
-By default kernel tries to use huge zero page on read page fault to
-anonymous mapping. It's possible to disable huge zero page by writing 0
-or enable it back by writing 1::
+By default kernel tries to use huge, PMD-mappable zero page on read
+page fault to anonymous mapping. It's possible to disable huge zero
+page by writing 0 or enable it back by writing 1::
 
 	echo 0 >/sys/kernel/mm/transparent_hugepage/use_zero_page
 	echo 1 >/sys/kernel/mm/transparent_hugepage/use_zero_page
 
-Some userspace (such as a test program, or an optimized memory allocation
-library) may want to know the size (in bytes) of a transparent hugepage::
+Some userspace (such as a test program, or an optimized memory
+allocation library) may want to know the size (in bytes) of a
+PMD-mappable transparent hugepage::
 
 	cat /sys/kernel/mm/transparent_hugepage/hpage_pmd_size
 
-khugepaged will be automatically started when
-transparent_hugepage/enabled is set to "always" or "madvise, and it'll
-be automatically shutdown if it's set to "never".
+khugepaged will be automatically started when one or more hugepage
+sizes are enabled (either by directly setting "always" or "madvise",
+or by setting "inherit" while the top-level enabled is set to "always"
+or "madvise"), and it'll be automatically shutdown when the last
+hugepage size is disabled (either by directly setting "never", or by
+setting "inherit" while the top-level enabled is set to "never").
 
 Khugepaged controls
 -------------------
 
+.. note::
+   khugepaged currently only searches for opportunities to collapse to
+   PMD-sized THP and no attempt is made to collapse to other THP
+   sizes.
+
 khugepaged runs usually at low frequency so while one may not want to
 invoke defrag algorithms synchronously during the page faults, it
 should be worth invoking defrag at least in khugepaged. However it's
@@ -282,19 +334,26 @@ force
 Need of application restart
 ===========================
 
-The transparent_hugepage/enabled values and tmpfs mount option only affect
-future behavior. So to make them effective you need to restart any
-application that could have been using hugepages. This also applies to the
-regions registered in khugepaged.
+The transparent_hugepage/enabled and
+transparent_hugepage/hugepages-<size>kB/enabled values and tmpfs mount
+option only affect future behavior. So to make them effective you need
+to restart any application that could have been using hugepages. This
+also applies to the regions registered in khugepaged.
 
 Monitoring usage
 ================
 
-The number of anonymous transparent huge pages currently used by the
+.. note::
+   Currently the below counters only record events relating to
+   PMD-sized THP. Events relating to other THP sizes are not included.
+
+The number of PMD-sized anonymous transparent huge pages currently used by the
 system is available by reading the AnonHugePages field in ``/proc/meminfo``.
-To identify what applications are using anonymous transparent huge pages,
-it is necessary to read ``/proc/PID/smaps`` and count the AnonHugePages fields
-for each mapping.
+To identify what applications are using PMD-sized anonymous transparent huge
+pages, it is necessary to read ``/proc/PID/smaps`` and count the AnonHugePages
+fields for each mapping. (Note that AnonHugePages only applies to traditional
+PMD-sized THP for historical reasons and should have been called
+AnonHugePmdMapped).
 
 The number of file transparent huge pages mapped to userspace is available
 by reading ShmemPmdMapped and ShmemHugePages fields in ``/proc/meminfo``.
@@ -413,7 +472,7 @@ for huge pages.
 Optimizing the applications
 ===========================
 
-To be guaranteed that the kernel will map a 2M page immediately in any
+To be guaranteed that the kernel will map a THP immediately in any
 memory region, the mmap region has to be hugepage naturally
 aligned. posix_memalign() can provide that guarantee.
 
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/mm/userfaultfd.rst linux-libre-6.8-gnu/Documentation/admin-guide/mm/userfaultfd.rst
index 203e26da5f92..e5cc8848dcb3 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/mm/userfaultfd.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/mm/userfaultfd.rst
@@ -113,6 +113,9 @@ events, except page fault notifications, may be generated:
   areas. ``UFFD_FEATURE_MINOR_SHMEM`` is the analogous feature indicating
   support for shmem virtual memory areas.
 
+- ``UFFD_FEATURE_MOVE`` indicates that the kernel supports moving an
+  existing page contents from userspace.
+
 The userland application should set the feature flags it intends to use
 when invoking the ``UFFDIO_API`` ioctl, to request that those features be
 enabled if supported.
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/mm/zswap.rst linux-libre-6.8-gnu/Documentation/admin-guide/mm/zswap.rst
index 45b98390e938..b42132969e31 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/mm/zswap.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/mm/zswap.rst
@@ -153,6 +153,26 @@ attribute, e. g.::
 
 Setting this parameter to 100 will disable the hysteresis.
 
+Some users cannot tolerate the swapping that comes with zswap store failures
+and zswap writebacks. Swapping can be disabled entirely (without disabling
+zswap itself) on a cgroup-basis as follows:
+
+	echo 0 > /sys/fs/cgroup/<cgroup-name>/memory.zswap.writeback
+
+Note that if the store failures are recurring (for e.g if the pages are
+incompressible), users can observe reclaim inefficiency after disabling
+writeback (because the same pages might be rejected again and again).
+
+When there is a sizable amount of cold memory residing in the zswap pool, it
+can be advantageous to proactively write these cold pages to swap and reclaim
+the memory for other use cases. By default, the zswap shrinker is disabled.
+User can enable it as follows:
+
+  echo Y > /sys/module/zswap/parameters/shrinker_enabled
+
+This can be enabled at the boot time if ``CONFIG_ZSWAP_SHRINKER_DEFAULT_ON`` is
+selected.
+
 A debugfs interface is provided for various statistic about pool size, number
 of pages stored, same-value filled pages and various counters for the reasons
 pages are rejected.
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/perf/dwc_pcie_pmu.rst linux-libre-6.8-gnu/Documentation/admin-guide/perf/dwc_pcie_pmu.rst
new file mode 100644
index 000000000000..d47cd229d710
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/admin-guide/perf/dwc_pcie_pmu.rst
@@ -0,0 +1,94 @@
+======================================================================
+Synopsys DesignWare Cores (DWC) PCIe Performance Monitoring Unit (PMU)
+======================================================================
+
+DesignWare Cores (DWC) PCIe PMU
+===============================
+
+The PMU is a PCIe configuration space register block provided by each PCIe Root
+Port in a Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
+injection, and Statistics).
+
+As the name indicates, the RAS DES capability supports system level
+debugging, AER error injection, and collection of statistics. To facilitate
+collection of statistics, Synopsys DesignWare Cores PCIe controller
+provides the following two features:
+
+- one 64-bit counter for Time Based Analysis (RX/TX data throughput and
+  time spent in each low-power LTSSM state) and
+- one 32-bit counter for Event Counting (error and non-error events for
+  a specified lane)
+
+Note: There is no interrupt for counter overflow.
+
+Time Based Analysis
+-------------------
+
+Using this feature you can obtain information regarding RX/TX data
+throughput and time spent in each low-power LTSSM state by the controller.
+The PMU measures data in two categories:
+
+- Group#0: Percentage of time the controller stays in LTSSM states.
+- Group#1: Amount of data processed (Units of 16 bytes).
+
+Lane Event counters
+-------------------
+
+Using this feature you can obtain Error and Non-Error information in
+specific lane by the controller. The PMU event is selected by all of:
+
+- Group i
+- Event j within the Group i
+- Lane k
+
+Some of the events only exist for specific configurations.
+
+DesignWare Cores (DWC) PCIe PMU Driver
+=======================================
+
+This driver adds PMU devices for each PCIe Root Port named based on the BDF of
+the Root Port. For example,
+
+    30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
+
+the PMU device name for this Root Port is dwc_rootport_3018.
+
+The DWC PCIe PMU driver registers a perf PMU driver, which provides
+description of available events and configuration options in sysfs, see
+/sys/bus/event_source/devices/dwc_rootport_{bdf}.
+
+The "format" directory describes format of the config fields of the
+perf_event_attr structure. The "events" directory provides configuration
+templates for all documented events.  For example,
+"Rx_PCIe_TLP_Data_Payload" is an equivalent of "eventid=0x22,type=0x1".
+
+The "perf list" command shall list the available events from sysfs, e.g.::
+
+    $# perf list | grep dwc_rootport
+    <...>
+    dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/        [Kernel PMU event]
+    <...>
+    dwc_rootport_3018/rx_memory_read,lane=?/               [Kernel PMU event]
+
+Time Based Analysis Event Usage
+-------------------------------
+
+Example usage of counting PCIe RX TLP data payload (Units of bytes)::
+
+    $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
+
+The average RX/TX bandwidth can be calculated using the following formula:
+
+    PCIe RX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window
+    PCIe TX Bandwidth = Tx_PCIe_TLP_Data_Payload / Measure_Time_Window
+
+Lane Event Usage
+-------------------------------
+
+Each lane has the same event set and to avoid generating a list of hundreds
+of events, the user need to specify the lane ID explicitly, e.g.::
+
+    $# perf stat -a -e dwc_rootport_3018/rx_memory_read,lane=4/
+
+The driver does not support sampling, therefore "perf record" will not
+work. Per-task (without "-a") perf sessions are not supported.
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/perf/imx-ddr.rst linux-libre-6.8-gnu/Documentation/admin-guide/perf/imx-ddr.rst
index 90926d0fb8ec..77418ae5a290 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/perf/imx-ddr.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/perf/imx-ddr.rst
@@ -13,8 +13,8 @@ is one register for each counter. Counter 0 is special in that it always counts
 interrupt is raised. If any other counter overflows, it continues counting, and
 no interrupt is raised.
 
-The "format" directory describes format of the config (event ID) and config1
-(AXI filtering) fields of the perf_event_attr structure, see /sys/bus/event_source/
+The "format" directory describes format of the config (event ID) and config1/2
+(AXI filter setting) fields of the perf_event_attr structure, see /sys/bus/event_source/
 devices/imx8_ddr0/format/. The "events" directory describes the events types
 hardware supported that can be used with perf tool, see /sys/bus/event_source/
 devices/imx8_ddr0/events/. The "caps" directory describes filter features implemented
@@ -28,12 +28,11 @@ in DDR PMU, see /sys/bus/events_source/devices/imx8_ddr0/caps/.
 AXI filtering is only used by CSV modes 0x41 (axid-read) and 0x42 (axid-write)
 to count reading or writing matches filter setting. Filter setting is various
 from different DRAM controller implementations, which is distinguished by quirks
-in the driver. You also can dump info from userspace, filter in "caps" directory
-indicates whether PMU supports AXI ID filter or not; enhanced_filter indicates
-whether PMU supports enhanced AXI ID filter or not. Value 0 for un-supported, and
-value 1 for supported.
+in the driver. You also can dump info from userspace, "caps" directory show the
+type of AXI filter (filter, enhanced_filter and super_filter). Value 0 for
+un-supported, and value 1 for supported.
 
-* With DDR_CAP_AXI_ID_FILTER quirk(filter: 1, enhanced_filter: 0).
+* With DDR_CAP_AXI_ID_FILTER quirk(filter: 1, enhanced_filter: 0, super_filter: 0).
   Filter is defined with two configuration parts:
   --AXI_ID defines AxID matching value.
   --AXI_MASKING defines which bits of AxID are meaningful for the matching.
@@ -65,7 +64,37 @@ value 1 for supported.
 
         perf stat -a -e imx8_ddr0/axid-read,axi_id=0x12/ cmd, which will monitor ARID=0x12
 
-* With DDR_CAP_AXI_ID_FILTER_ENHANCED quirk(filter: 1, enhanced_filter: 1).
+* With DDR_CAP_AXI_ID_FILTER_ENHANCED quirk(filter: 1, enhanced_filter: 1, super_filter: 0).
   This is an extension to the DDR_CAP_AXI_ID_FILTER quirk which permits
   counting the number of bytes (as opposed to the number of bursts) from DDR
   read and write transactions concurrently with another set of data counters.
+
+* With DDR_CAP_AXI_ID_PORT_CHANNEL_FILTER quirk(filter: 0, enhanced_filter: 0, super_filter: 1).
+  There is a limitation in previous AXI filter, it cannot filter different IDs
+  at the same time as the filter is shared between counters. This quirk is the
+  extension of AXI ID filter. One improvement is that counter 1-3 has their own
+  filter, means that it supports concurrently filter various IDs. Another
+  improvement is that counter 1-3 supports AXI PORT and CHANNEL selection. Support
+  selecting address channel or data channel.
+
+  Filter is defined with 2 configuration registers per counter 1-3.
+  --Counter N MASK COMP register - including AXI_ID and AXI_MASKING.
+  --Counter N MUX CNTL register - including AXI CHANNEL and AXI PORT.
+
+      - 0: address channel
+      - 1: data channel
+
+  PMU in DDR subsystem, only one single port0 exists, so axi_port is reserved
+  which should be 0.
+
+  .. code-block:: bash
+
+      perf stat -a -e imx8_ddr0/axid-read,axi_mask=0xMMMM,axi_id=0xDDDD,axi_channel=0xH/ cmd
+      perf stat -a -e imx8_ddr0/axid-write,axi_mask=0xMMMM,axi_id=0xDDDD,axi_channel=0xH/ cmd
+
+  .. note::
+
+      axi_channel is inverted in userspace, and it will be reverted in driver
+      automatically. So that users do not need specify axi_channel if want to
+      monitor data channel from DDR transactions, since data channel is more
+      meaningful.
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/perf/index.rst linux-libre-6.8-gnu/Documentation/admin-guide/perf/index.rst
index a2e6f2c81146..f4a4513c526f 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/perf/index.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/perf/index.rst
@@ -19,6 +19,7 @@ Performance monitor support
    arm_dsu_pmu
    thunderx2-pmu
    alibaba_pmu
+   dwc_pcie_pmu
    nvidia-pmu
    meson-ddr-pmu
    cxl
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/pm/amd-pstate.rst linux-libre-6.8-gnu/Documentation/admin-guide/pm/amd-pstate.rst
index 1cf40f69278c..9eb26014d34b 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/pm/amd-pstate.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/pm/amd-pstate.rst
@@ -361,7 +361,7 @@ Global Attributes
 
 ``amd-pstate`` exposes several global attributes (files) in ``sysfs`` to
 control its functionality at the system level.  They are located in the
-``/sys/devices/system/cpu/amd-pstate/`` directory and affect all CPUs.
+``/sys/devices/system/cpu/amd_pstate/`` directory and affect all CPUs.
 
 ``status``
 	Operation mode of the driver: "active", "passive" or "disable".
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/pmf.rst linux-libre-6.8-gnu/Documentation/admin-guide/pmf.rst
new file mode 100644
index 000000000000..9ee729ffc19b
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/admin-guide/pmf.rst
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Set udev rules for PMF Smart PC Builder
+---------------------------------------
+
+AMD PMF(Platform Management Framework) Smart PC Solution builder has to set the system states
+like S0i3, Screen lock, hibernate etc, based on the output actions provided by the PMF
+TA (Trusted Application).
+
+In order for this to work the PMF driver generates a uevent for userspace to react to. Below are
+sample udev rules that can facilitate this experience when a machine has PMF Smart PC solution builder
+enabled.
+
+Please add the following line(s) to
+``/etc/udev/rules.d/99-local.rules``::
+
+        DRIVERS=="amd-pmf", ACTION=="change", ENV{EVENT_ID}=="0", RUN+="/usr/bin/systemctl suspend"
+        DRIVERS=="amd-pmf", ACTION=="change", ENV{EVENT_ID}=="1", RUN+="/usr/bin/systemctl hibernate"
+        DRIVERS=="amd-pmf", ACTION=="change", ENV{EVENT_ID}=="2", RUN+="/bin/loginctl lock-sessions"
+
+EVENT_ID values:
+0= Put the system to S0i3/S2Idle
+1= Put the system to hibernate
+2= Lock the screen
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/sysctl/net.rst linux-libre-6.8-gnu/Documentation/admin-guide/sysctl/net.rst
index c7525942f12c..396091651955 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/sysctl/net.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/sysctl/net.rst
@@ -345,7 +345,10 @@ optmem_max
 ----------
 
 Maximum ancillary buffer size allowed per socket. Ancillary data is a sequence
-of struct cmsghdr structures with appended data.
+of struct cmsghdr structures with appended data. TCP tx zerocopy also uses
+optmem_max as a limit for its internal structures.
+
+Default : 128 KB
 
 fb_tunnels_only_for_init_net
 ----------------------------
diff --git linux-libre-6.7-gnu/Documentation/admin-guide/sysrq.rst linux-libre-6.8-gnu/Documentation/admin-guide/sysrq.rst
index 51906e47327b..2f2e5bd440f9 100644
--- linux-libre-6.7-gnu/Documentation/admin-guide/sysrq.rst
+++ linux-libre-6.8-gnu/Documentation/admin-guide/sysrq.rst
@@ -75,10 +75,19 @@ On other
 	submit a patch to be included in this section.
 
 On all
-	Write a character to /proc/sysrq-trigger.  e.g.::
+	Write a single character to /proc/sysrq-trigger.
+	Only the first character is processed, the rest of the string is
+	ignored. However, it is not recommended to write any extra characters
+	as the behavior is undefined and might change in the future versions.
+	E.g.::
 
 		echo t > /proc/sysrq-trigger
 
+	Alternatively, write multiple characters prepended by underscore.
+	This way, all characters will be processed. E.g.::
+
+		echo _reisub > /proc/sysrq-trigger
+
 The :kbd:`<command key>` is case sensitive.
 
 What are the 'command' keys?
diff --git linux-libre-6.7-gnu/Documentation/arch/arc/features.rst linux-libre-6.8-gnu/Documentation/arch/arc/features.rst
index b793583d688a..49ff446ff744 100644
--- linux-libre-6.7-gnu/Documentation/arch/arc/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/arc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arc
+.. kernel-feat:: features arc
diff --git linux-libre-6.7-gnu/Documentation/arch/arm/features.rst linux-libre-6.8-gnu/Documentation/arch/arm/features.rst
index 7414ec03dd15..0e76aaf68eca 100644
--- linux-libre-6.7-gnu/Documentation/arch/arm/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/arm/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arm
+.. kernel-feat:: features arm
diff --git linux-libre-6.7-gnu/Documentation/arch/arm64/arm-acpi.rst linux-libre-6.8-gnu/Documentation/arch/arm64/arm-acpi.rst
index a46c34fa9604..e59e4505d0d9 100644
--- linux-libre-6.7-gnu/Documentation/arch/arm64/arm-acpi.rst
+++ linux-libre-6.8-gnu/Documentation/arch/arm64/arm-acpi.rst
@@ -130,7 +130,7 @@ When an Arm system boots, it can either have DT information, ACPI tables,
 or in some very unusual cases, both.  If no command line parameters are used,
 the kernel will try to use DT for device enumeration; if there is no DT
 present, the kernel will try to use ACPI tables, but only if they are present.
-In neither is available, the kernel will not boot.  If acpi=force is used
+If neither is available, the kernel will not boot.  If acpi=force is used
 on the command line, the kernel will attempt to use ACPI tables first, but
 fall back to DT if there are no ACPI tables present.  The basic idea is that
 the kernel will not fail to boot unless it absolutely has no other choice.
diff --git linux-libre-6.7-gnu/Documentation/arch/arm64/features.rst linux-libre-6.8-gnu/Documentation/arch/arm64/features.rst
index dfa4cb3cd3ef..03321f4309d0 100644
--- linux-libre-6.7-gnu/Documentation/arch/arm64/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/arm64/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arm64
+.. kernel-feat:: features arm64
diff --git linux-libre-6.7-gnu/Documentation/arch/arm64/perf.rst linux-libre-6.8-gnu/Documentation/arch/arm64/perf.rst
index 1f87b57c2332..997fd716b82f 100644
--- linux-libre-6.7-gnu/Documentation/arch/arm64/perf.rst
+++ linux-libre-6.8-gnu/Documentation/arch/arm64/perf.rst
@@ -164,3 +164,75 @@ and should be used to mask the upper bits as needed.
    https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/perf/arch/arm64/tests/user-events.c
 .. _tools/lib/perf/tests/test-evsel.c:
    https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/lib/perf/tests/test-evsel.c
+
+Event Counting Threshold
+==========================================
+
+Overview
+--------
+
+FEAT_PMUv3_TH (Armv8.8) permits a PMU counter to increment only on
+events whose count meets a specified threshold condition. For example if
+threshold_compare is set to 2 ('Greater than or equal'), and the
+threshold is set to 2, then the PMU counter will now only increment by
+when an event would have previously incremented the PMU counter by 2 or
+more on a single processor cycle.
+
+To increment by 1 after passing the threshold condition instead of the
+number of events on that cycle, add the 'threshold_count' option to the
+commandline.
+
+How-to
+------
+
+These are the parameters for controlling the feature:
+
+.. list-table::
+   :header-rows: 1
+
+   * - Parameter
+     - Description
+   * - threshold
+     - Value to threshold the event by. A value of 0 means that
+       thresholding is disabled and the other parameters have no effect.
+   * - threshold_compare
+     - | Comparison function to use, with the following values supported:
+       |
+       | 0: Not-equal
+       | 1: Equals
+       | 2: Greater-than-or-equal
+       | 3: Less-than
+   * - threshold_count
+     - If this is set, count by 1 after passing the threshold condition
+       instead of the value of the event on this cycle.
+
+The threshold, threshold_compare and threshold_count values can be
+provided per event, for example:
+
+.. code-block:: sh
+
+  perf stat -e stall_slot/threshold=2,threshold_compare=2/ \
+            -e dtlb_walk/threshold=10,threshold_compare=3,threshold_count/
+
+In this example the stall_slot event will count by 2 or more on every
+cycle where 2 or more stalls happen. And dtlb_walk will count by 1 on
+every cycle where the number of dtlb walks were less than 10.
+
+The maximum supported threshold value can be read from the caps of each
+PMU, for example:
+
+.. code-block:: sh
+
+  cat /sys/bus/event_source/devices/armv8_pmuv3/caps/threshold_max
+
+  0x000000ff
+
+If a value higher than this is given, then opening the event will result
+in an error. The highest possible maximum is 4095, as the config field
+for threshold is limited to 12 bits, and the Perf tool will refuse to
+parse higher values.
+
+If the PMU doesn't support FEAT_PMUv3_TH, then threshold_max will read
+0, and attempting to set a threshold value will also result in an error.
+threshold_max will also read as 0 on aarch32 guests, even if the host
+is running on hardware with the feature.
diff --git linux-libre-6.7-gnu/Documentation/arch/arm64/silicon-errata.rst linux-libre-6.8-gnu/Documentation/arch/arm64/silicon-errata.rst
index f47f63bcf67c..45a7f4932fe0 100644
--- linux-libre-6.7-gnu/Documentation/arch/arm64/silicon-errata.rst
+++ linux-libre-6.8-gnu/Documentation/arch/arm64/silicon-errata.rst
@@ -71,6 +71,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2658417        | ARM64_ERRATUM_2658417       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #3117295        | ARM64_ERRATUM_3117295       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A520     | #2966298        | ARM64_ERRATUM_2966298       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
@@ -117,6 +119,10 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1463225        | ARM64_ERRATUM_1463225       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #1490853        | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A77      | #1491015        | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
@@ -127,6 +133,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A715     | #2645198        | ARM64_ERRATUM_2645198       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1       | #1502854        | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2224489        | ARM64_ERRATUM_2224489       |
@@ -135,6 +143,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #1490853        | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1542419        | ARM64_ERRATUM_1542419       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2139208        | ARM64_ERRATUM_2139208       |
@@ -143,6 +153,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2253138        | ARM64_ERRATUM_2253138       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V1     | #1619801        | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-600         | #1076982,1209401| N/A                         |
@@ -225,11 +237,16 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Rockchip       | RK3588          | #3588001        | ROCKCHIP_ERRATUM_3588001    |
 +----------------+-----------------+-----------------+-----------------------------+
-
 +----------------+-----------------+-----------------+-----------------------------+
 | Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
 +----------------+-----------------+-----------------+-----------------------------+
-
 +----------------+-----------------+-----------------+-----------------------------+
 | ASR            | ASR8601         | #8601001        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2139208        | ARM64_ERRATUM_2139208       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2067961        | ARM64_ERRATUM_2067961       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2253138        | ARM64_ERRATUM_2253138       |
++----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-6.7-gnu/Documentation/arch/loongarch/features.rst linux-libre-6.8-gnu/Documentation/arch/loongarch/features.rst
index ebacade3ea45..009f44c7951f 100644
--- linux-libre-6.7-gnu/Documentation/arch/loongarch/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/loongarch/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features loongarch
+.. kernel-feat:: features loongarch
diff --git linux-libre-6.7-gnu/Documentation/arch/m68k/features.rst linux-libre-6.8-gnu/Documentation/arch/m68k/features.rst
index 5107a2119472..de7f0ccf7fc8 100644
--- linux-libre-6.7-gnu/Documentation/arch/m68k/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/m68k/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features m68k
+.. kernel-feat:: features m68k
diff --git linux-libre-6.7-gnu/Documentation/arch/mips/features.rst linux-libre-6.8-gnu/Documentation/arch/mips/features.rst
index 1973d729b29a..6e0ffe3e7354 100644
--- linux-libre-6.7-gnu/Documentation/arch/mips/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/mips/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features mips
+.. kernel-feat:: features mips
diff --git linux-libre-6.7-gnu/Documentation/arch/nios2/features.rst linux-libre-6.8-gnu/Documentation/arch/nios2/features.rst
index 8449e63f69b2..89913810ccb5 100644
--- linux-libre-6.7-gnu/Documentation/arch/nios2/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/nios2/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features nios2
+.. kernel-feat:: features nios2
diff --git linux-libre-6.7-gnu/Documentation/arch/openrisc/features.rst linux-libre-6.8-gnu/Documentation/arch/openrisc/features.rst
index 3f7c40d219f2..bae2e25adfd6 100644
--- linux-libre-6.7-gnu/Documentation/arch/openrisc/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/openrisc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features openrisc
+.. kernel-feat:: features openrisc
diff --git linux-libre-6.7-gnu/Documentation/arch/parisc/features.rst linux-libre-6.8-gnu/Documentation/arch/parisc/features.rst
index 501d7c450037..b3aa4d243b93 100644
--- linux-libre-6.7-gnu/Documentation/arch/parisc/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/parisc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features parisc
+.. kernel-feat:: features parisc
diff --git linux-libre-6.7-gnu/Documentation/arch/powerpc/features.rst linux-libre-6.8-gnu/Documentation/arch/powerpc/features.rst
index aeae73df86b0..ee4b95e04202 100644
--- linux-libre-6.7-gnu/Documentation/arch/powerpc/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/powerpc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features powerpc
+.. kernel-feat:: features powerpc
diff --git linux-libre-6.7-gnu/Documentation/arch/riscv/features.rst linux-libre-6.8-gnu/Documentation/arch/riscv/features.rst
index c70ef6ac2368..36e90144adab 100644
--- linux-libre-6.7-gnu/Documentation/arch/riscv/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/riscv/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features riscv
+.. kernel-feat:: features riscv
diff --git linux-libre-6.7-gnu/Documentation/arch/riscv/hwprobe.rst linux-libre-6.8-gnu/Documentation/arch/riscv/hwprobe.rst
index 7b2384de471f..b2bcc9eed9aa 100644
--- linux-libre-6.7-gnu/Documentation/arch/riscv/hwprobe.rst
+++ linux-libre-6.8-gnu/Documentation/arch/riscv/hwprobe.rst
@@ -12,7 +12,7 @@ is defined in <asm/hwprobe.h>::
     };
 
     long sys_riscv_hwprobe(struct riscv_hwprobe *pairs, size_t pair_count,
-                           size_t cpu_count, cpu_set_t *cpus,
+                           size_t cpusetsize, cpu_set_t *cpus,
                            unsigned int flags);
 
 The arguments are split into three groups: an array of key-value pairs, a CPU
@@ -20,12 +20,26 @@ set, and some flags. The key-value pairs are supplied with a count. Userspace
 must prepopulate the key field for each element, and the kernel will fill in the
 value if the key is recognized. If a key is unknown to the kernel, its key field
 will be cleared to -1, and its value set to 0. The CPU set is defined by
-CPU_SET(3). For value-like keys (eg. vendor/arch/impl), the returned value will
-be only be valid if all CPUs in the given set have the same value. Otherwise -1
-will be returned. For boolean-like keys, the value returned will be a logical
-AND of the values for the specified CPUs. Usermode can supply NULL for cpus and
-0 for cpu_count as a shortcut for all online CPUs. There are currently no flags,
-this value must be zero for future compatibility.
+CPU_SET(3) with size ``cpusetsize`` bytes. For value-like keys (eg. vendor,
+arch, impl), the returned value will only be valid if all CPUs in the given set
+have the same value. Otherwise -1 will be returned. For boolean-like keys, the
+value returned will be a logical AND of the values for the specified CPUs.
+Usermode can supply NULL for ``cpus`` and 0 for ``cpusetsize`` as a shortcut for
+all online CPUs. The currently supported flags are:
+
+* :c:macro:`RISCV_HWPROBE_WHICH_CPUS`: This flag basically reverses the behavior
+  of sys_riscv_hwprobe().  Instead of populating the values of keys for a given
+  set of CPUs, the values of each key are given and the set of CPUs is reduced
+  by sys_riscv_hwprobe() to only those which match each of the key-value pairs.
+  How matching is done depends on the key type.  For value-like keys, matching
+  means to be the exact same as the value.  For boolean-like keys, matching
+  means the result of a logical AND of the pair's value with the CPU's value is
+  exactly the same as the pair's value.  Additionally, when ``cpus`` is an empty
+  set, then it is initialized to all online CPUs which fit within it, i.e. the
+  CPU set returned is the reduction of all the online CPUs which can be
+  represented with a CPU set of size ``cpusetsize``.
+
+All other flags are reserved for future compatibility and must be zero.
 
 On success 0 is returned, on failure a negative error code is returned.
 
@@ -80,6 +94,100 @@ The following keys are defined:
   * :c:macro:`RISCV_HWPROBE_EXT_ZICBOZ`: The Zicboz extension is supported, as
        ratified in commit 3dd606f ("Create cmobase-v1.0.pdf") of riscv-CMOs.
 
+  * :c:macro:`RISCV_HWPROBE_EXT_ZBC` The Zbc extension is supported, as defined
+       in version 1.0 of the Bit-Manipulation ISA extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZBKB` The Zbkb extension is supported, as
+       defined in version 1.0 of the Scalar Crypto ISA extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZBKC` The Zbkc extension is supported, as
+       defined in version 1.0 of the Scalar Crypto ISA extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZBKX` The Zbkx extension is supported, as
+       defined in version 1.0 of the Scalar Crypto ISA extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZKND` The Zknd extension is supported, as
+       defined in version 1.0 of the Scalar Crypto ISA extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZKNE` The Zkne extension is supported, as
+       defined in version 1.0 of the Scalar Crypto ISA extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZKNH` The Zknh extension is supported, as
+       defined in version 1.0 of the Scalar Crypto ISA extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZKSED` The Zksed extension is supported, as
+       defined in version 1.0 of the Scalar Crypto ISA extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZKSH` The Zksh extension is supported, as
+       defined in version 1.0 of the Scalar Crypto ISA extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZKT` The Zkt extension is supported, as defined
+       in version 1.0 of the Scalar Crypto ISA extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZVBB`: The Zvbb extension is supported as
+       defined in version 1.0 of the RISC-V Cryptography Extensions Volume II.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZVBC`: The Zvbc extension is supported as
+       defined in version 1.0 of the RISC-V Cryptography Extensions Volume II.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZVKB`: The Zvkb extension is supported as
+       defined in version 1.0 of the RISC-V Cryptography Extensions Volume II.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZVKG`: The Zvkg extension is supported as
+       defined in version 1.0 of the RISC-V Cryptography Extensions Volume II.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZVKNED`: The Zvkned extension is supported as
+       defined in version 1.0 of the RISC-V Cryptography Extensions Volume II.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZVKNHA`: The Zvknha extension is supported as
+       defined in version 1.0 of the RISC-V Cryptography Extensions Volume II.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZVKNHB`: The Zvknhb extension is supported as
+       defined in version 1.0 of the RISC-V Cryptography Extensions Volume II.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZVKSED`: The Zvksed extension is supported as
+       defined in version 1.0 of the RISC-V Cryptography Extensions Volume II.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZVKSH`: The Zvksh extension is supported as
+       defined in version 1.0 of the RISC-V Cryptography Extensions Volume II.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZVKT`: The Zvkt extension is supported as
+       defined in version 1.0 of the RISC-V Cryptography Extensions Volume II.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZFH`: The Zfh extension version 1.0 is supported
+       as defined in the RISC-V ISA manual.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZFHMIN`: The Zfhmin extension version 1.0 is
+       supported as defined in the RISC-V ISA manual.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZIHINTNTL`: The Zihintntl extension version 1.0
+       is supported as defined in the RISC-V ISA manual.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZVFH`: The Zvfh extension is supported as
+       defined in the RISC-V Vector manual starting from commit e2ccd0548d6c
+       ("Remove draft warnings from Zvfh[min]").
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZVFHMIN`: The Zvfhmin extension is supported as
+       defined in the RISC-V Vector manual starting from commit e2ccd0548d6c
+       ("Remove draft warnings from Zvfh[min]").
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZFA`: The Zfa extension is supported as
+       defined in the RISC-V ISA manual starting from commit 056b6ff467c7
+       ("Zfa is ratified").
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZTSO`: The Ztso extension is supported as
+       defined in the RISC-V ISA manual starting from commit 5618fb5a216b
+       ("Ztso is now ratified.")
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZACAS`: The Zacas extension is supported as
+       defined in the Atomic Compare-and-Swap (CAS) instructions manual starting
+       from commit 5059e0ca641c ("update to ratified").
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZICOND`: The Zicond extension is supported as
+       defined in the RISC-V Integer Conditional (Zicond) operations extension
+       manual starting from commit 95cf1f9 ("Add changes requested by Ved
+       during signoff")
+
 * :c:macro:`RISCV_HWPROBE_KEY_CPUPERF_0`: A bitmask that contains performance
   information about the selected set of processors.
 
diff --git linux-libre-6.7-gnu/Documentation/arch/s390/features.rst linux-libre-6.8-gnu/Documentation/arch/s390/features.rst
index 57c296a9d8f3..2883dc950681 100644
--- linux-libre-6.7-gnu/Documentation/arch/s390/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/s390/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features s390
+.. kernel-feat:: features s390
diff --git linux-libre-6.7-gnu/Documentation/arch/sh/features.rst linux-libre-6.8-gnu/Documentation/arch/sh/features.rst
index f722af3b6c99..fae48fe81e9b 100644
--- linux-libre-6.7-gnu/Documentation/arch/sh/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/sh/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features sh
+.. kernel-feat:: features sh
diff --git linux-libre-6.7-gnu/Documentation/arch/sparc/features.rst linux-libre-6.8-gnu/Documentation/arch/sparc/features.rst
index c0c92468b0fe..96835b6d598a 100644
--- linux-libre-6.7-gnu/Documentation/arch/sparc/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/sparc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features sparc
+.. kernel-feat:: features sparc
diff --git linux-libre-6.7-gnu/Documentation/arch/x86/boot.rst linux-libre-6.8-gnu/Documentation/arch/x86/boot.rst
index 22cc7a040dae..c513855a54bb 100644
--- linux-libre-6.7-gnu/Documentation/arch/x86/boot.rst
+++ linux-libre-6.8-gnu/Documentation/arch/x86/boot.rst
@@ -71,7 +71,7 @@ Protocol 2.13	(Kernel 3.14) Support 32- and 64-bit flags being set in
 
 Protocol 2.14	BURNT BY INCORRECT COMMIT
                 ae7e1238e68f2a472a125673ab506d49158c1889
-		(x86/boot: Add ACPI RSDP address to setup_header)
+		("x86/boot: Add ACPI RSDP address to setup_header")
 		DO NOT USE!!! ASSUME SAME AS 2.13.
 
 Protocol 2.15	(Kernel 5.5) Added the kernel_info and kernel_info.setup_type_max.
diff --git linux-libre-6.7-gnu/Documentation/arch/x86/cpuinfo.rst linux-libre-6.8-gnu/Documentation/arch/x86/cpuinfo.rst
index 08246e8ac835..8895784d4784 100644
--- linux-libre-6.7-gnu/Documentation/arch/x86/cpuinfo.rst
+++ linux-libre-6.8-gnu/Documentation/arch/x86/cpuinfo.rst
@@ -7,27 +7,74 @@ x86 Feature Flags
 Introduction
 ============
 
-On x86, flags appearing in /proc/cpuinfo have an X86_FEATURE definition
-in arch/x86/include/asm/cpufeatures.h. If the kernel cares about a feature
-or KVM want to expose the feature to a KVM guest, it can and should have
-an X86_FEATURE_* defined. These flags represent hardware features as
-well as software features.
-
-If users want to know if a feature is available on a given system, they
-try to find the flag in /proc/cpuinfo. If a given flag is present, it
-means that the kernel supports it and is currently making it available.
-If such flag represents a hardware feature, it also means that the
-hardware supports it.
-
-If the expected flag does not appear in /proc/cpuinfo, things are murkier.
-Users need to find out the reason why the flag is missing and find the way
-how to enable it, which is not always easy. There are several factors that
-can explain missing flags: the expected feature failed to enable, the feature
-is missing in hardware, platform firmware did not enable it, the feature is
-disabled at build or run time, an old kernel is in use, or the kernel does
-not support the feature and thus has not enabled it. In general, /proc/cpuinfo
-shows features which the kernel supports. For a full list of CPUID flags
-which the CPU supports, use tools/arch/x86/kcpuid.
+The list of feature flags in /proc/cpuinfo is not complete and
+represents an ill-fated attempt from long time ago to put feature flags
+in an easy to find place for userspace.
+
+However, the amount of feature flags is growing by the CPU generation,
+leading to unparseable and unwieldy /proc/cpuinfo.
+
+What is more, those feature flags do not even need to be in that file
+because userspace doesn't care about them - glibc et al already use
+CPUID to find out what the target machine supports and what not.
+
+And even if it doesn't show a particular feature flag - although the CPU
+still does have support for the respective hardware functionality and
+said CPU supports CPUID faulting - userspace can simply probe for the
+feature and figure out if it is supported or not, regardless of whether
+it is being advertised somewhere.
+
+Furthermore, those flag strings become an ABI the moment they appear
+there and maintaining them forever when nothing even uses them is a lot
+of wasted effort.
+
+So, the current use of /proc/cpuinfo is to show features which the
+kernel has *enabled* and *supports*. As in: the CPUID feature flag is
+there, there's an additional setup which the kernel has done while
+booting and the functionality is ready to use. A perfect example for
+that is "user_shstk" where additional code enablement is present in the
+kernel to support shadow stack for user programs.
+
+So, if users want to know if a feature is available on a given system,
+they try to find the flag in /proc/cpuinfo. If a given flag is present,
+it means that
+
+* the kernel knows about the feature enough to have an X86_FEATURE bit
+
+* the kernel supports it and is currently making it available either to
+  userspace or some other part of the kernel
+
+* if the flag represents a hardware feature the hardware supports it.
+
+The absence of a flag in /proc/cpuinfo by itself means almost nothing to
+an end user.
+
+On the one hand, a feature like "vaes" might be fully available to user
+applications on a kernel that has not defined X86_FEATURE_VAES and thus
+there is no "vaes" in /proc/cpuinfo.
+
+On the other hand, a new kernel running on non-VAES hardware would also
+have no "vaes" in /proc/cpuinfo.  There's no way for an application or
+user to tell the difference.
+
+The end result is that the flags field in /proc/cpuinfo is marginally
+useful for kernel debugging, but not really for anything else.
+Applications should instead use things like the glibc facilities for
+querying CPU support.  Users should rely on tools like
+tools/arch/x86/kcpuid and cpuid(1).
+
+Regarding implementation, flags appearing in /proc/cpuinfo have an
+X86_FEATURE definition in arch/x86/include/asm/cpufeatures.h. These flags
+represent hardware features as well as software features.
+
+If the kernel cares about a feature or KVM want to expose the feature to
+a KVM guest, it should only then expose it to the guest when the guest
+needs to parse /proc/cpuinfo. Which, as mentioned above, is highly
+unlikely. KVM can synthesize the CPUID bit and the KVM guest can simply
+query CPUID and figure out what the hypervisor supports and what not. As
+already stated, /proc/cpuinfo is not a dumping ground for useless
+feature flags.
+
 
 How are feature flags created?
 ==============================
diff --git linux-libre-6.7-gnu/Documentation/arch/x86/features.rst linux-libre-6.8-gnu/Documentation/arch/x86/features.rst
index b663f15053ce..a33616346a38 100644
--- linux-libre-6.7-gnu/Documentation/arch/x86/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/x86/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features x86
+.. kernel-feat:: features x86
diff --git linux-libre-6.7-gnu/Documentation/arch/x86/mds.rst linux-libre-6.8-gnu/Documentation/arch/x86/mds.rst
index e73fdff62c0a..c58c72362911 100644
--- linux-libre-6.7-gnu/Documentation/arch/x86/mds.rst
+++ linux-libre-6.8-gnu/Documentation/arch/x86/mds.rst
@@ -95,6 +95,9 @@ The kernel provides a function to invoke the buffer clearing:
 
     mds_clear_cpu_buffers()
 
+Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path.
+Other than CFLAGS.ZF, this macro doesn't clobber any registers.
+
 The mitigation is invoked on kernel/userspace, hypervisor/guest and C-state
 (idle) transitions.
 
@@ -138,17 +141,30 @@ Mitigation points
 
    When transitioning from kernel to user space the CPU buffers are flushed
    on affected CPUs when the mitigation is not disabled on the kernel
-   command line. The migitation is enabled through the static key
-   mds_user_clear.
-
-   The mitigation is invoked in prepare_exit_to_usermode() which covers
-   all but one of the kernel to user space transitions.  The exception
-   is when we return from a Non Maskable Interrupt (NMI), which is
-   handled directly in do_nmi().
-
-   (The reason that NMI is special is that prepare_exit_to_usermode() can
-    enable IRQs.  In NMI context, NMIs are blocked, and we don't want to
-    enable IRQs with NMIs blocked.)
+   command line. The mitigation is enabled through the feature flag
+   X86_FEATURE_CLEAR_CPU_BUF.
+
+   The mitigation is invoked just before transitioning to userspace after
+   user registers are restored. This is done to minimize the window in
+   which kernel data could be accessed after VERW e.g. via an NMI after
+   VERW.
+
+   **Corner case not handled**
+   Interrupts returning to kernel don't clear CPUs buffers since the
+   exit-to-user path is expected to do that anyways. But, there could be
+   a case when an NMI is generated in kernel after the exit-to-user path
+   has cleared the buffers. This case is not handled and NMI returning to
+   kernel don't clear CPU buffers because:
+
+   1. It is rare to get an NMI after VERW, but before returning to userspace.
+   2. For an unprivileged user, there is no known way to make that NMI
+      less rare or target it.
+   3. It would take a large number of these precisely-timed NMIs to mount
+      an actual attack.  There's presumably not enough bandwidth.
+   4. The NMI in question occurs after a VERW, i.e. when user state is
+      restored and most interesting data is already scrubbed. Whats left
+      is only the data that NMI touches, and that may or may not be of
+      any interest.
 
 
 2. C-State transition
diff --git linux-libre-6.7-gnu/Documentation/arch/x86/pti.rst linux-libre-6.8-gnu/Documentation/arch/x86/pti.rst
index 4b858a9bad8d..e08d35177bc0 100644
--- linux-libre-6.7-gnu/Documentation/arch/x86/pti.rst
+++ linux-libre-6.8-gnu/Documentation/arch/x86/pti.rst
@@ -81,11 +81,9 @@ this protection comes at a cost:
      and exit (it can be skipped when the kernel is interrupted,
      though.)  Moves to CR3 are on the order of a hundred
      cycles, and are required at every entry and exit.
-  b. A "trampoline" must be used for SYSCALL entry.  This
-     trampoline depends on a smaller set of resources than the
-     non-PTI SYSCALL entry code, so requires mapping fewer
-     things into the userspace page tables.  The downside is
-     that stacks must be switched at entry time.
+  b. Percpu TSS is mapped into the user page tables to allow SYSCALL64 path
+     to work under PTI. This doesn't have a direct runtime cost but it can
+     be argued it opens certain timing attack scenarios.
   c. Global pages are disabled for all kernel structures not
      mapped into both kernel and userspace page tables.  This
      feature of the MMU allows different processes to share TLB
@@ -167,7 +165,7 @@ that are worth noting here.
  * Failures of the selftests/x86 code.  Usually a bug in one of the
    more obscure corners of entry_64.S
  * Crashes in early boot, especially around CPU bringup.  Bugs
-   in the trampoline code or mappings cause these.
+   in the mappings cause these.
  * Crashes at the first interrupt.  Caused by bugs in entry_64.S,
    like screwing up a page table switch.  Also caused by
    incorrectly mapping the IRQ handler entry code.
diff --git linux-libre-6.7-gnu/Documentation/arch/x86/tdx.rst linux-libre-6.8-gnu/Documentation/arch/x86/tdx.rst
index dc8d9fd2c3f7..719043cd8b46 100644
--- linux-libre-6.7-gnu/Documentation/arch/x86/tdx.rst
+++ linux-libre-6.8-gnu/Documentation/arch/x86/tdx.rst
@@ -10,6 +10,191 @@ encrypting the guest memory. In TDX, a special module running in a special
 mode sits between the host and the guest and manages the guest/host
 separation.
 
+TDX Host Kernel Support
+=======================
+
+TDX introduces a new CPU mode called Secure Arbitration Mode (SEAM) and
+a new isolated range pointed by the SEAM Ranger Register (SEAMRR).  A
+CPU-attested software module called 'the TDX module' runs inside the new
+isolated range to provide the functionalities to manage and run protected
+VMs.
+
+TDX also leverages Intel Multi-Key Total Memory Encryption (MKTME) to
+provide crypto-protection to the VMs.  TDX reserves part of MKTME KeyIDs
+as TDX private KeyIDs, which are only accessible within the SEAM mode.
+BIOS is responsible for partitioning legacy MKTME KeyIDs and TDX KeyIDs.
+
+Before the TDX module can be used to create and run protected VMs, it
+must be loaded into the isolated range and properly initialized.  The TDX
+architecture doesn't require the BIOS to load the TDX module, but the
+kernel assumes it is loaded by the BIOS.
+
+TDX boot-time detection
+-----------------------
+
+The kernel detects TDX by detecting TDX private KeyIDs during kernel
+boot.  Below dmesg shows when TDX is enabled by BIOS::
+
+  [..] virt/tdx: BIOS enabled: private KeyID range: [16, 64)
+
+TDX module initialization
+---------------------------------------
+
+The kernel talks to the TDX module via the new SEAMCALL instruction.  The
+TDX module implements SEAMCALL leaf functions to allow the kernel to
+initialize it.
+
+If the TDX module isn't loaded, the SEAMCALL instruction fails with a
+special error.  In this case the kernel fails the module initialization
+and reports the module isn't loaded::
+
+  [..] virt/tdx: module not loaded
+
+Initializing the TDX module consumes roughly ~1/256th system RAM size to
+use it as 'metadata' for the TDX memory.  It also takes additional CPU
+time to initialize those metadata along with the TDX module itself.  Both
+are not trivial.  The kernel initializes the TDX module at runtime on
+demand.
+
+Besides initializing the TDX module, a per-cpu initialization SEAMCALL
+must be done on one cpu before any other SEAMCALLs can be made on that
+cpu.
+
+The kernel provides two functions, tdx_enable() and tdx_cpu_enable() to
+allow the user of TDX to enable the TDX module and enable TDX on local
+cpu respectively.
+
+Making SEAMCALL requires VMXON has been done on that CPU.  Currently only
+KVM implements VMXON.  For now both tdx_enable() and tdx_cpu_enable()
+don't do VMXON internally (not trivial), but depends on the caller to
+guarantee that.
+
+To enable TDX, the caller of TDX should: 1) temporarily disable CPU
+hotplug; 2) do VMXON and tdx_enable_cpu() on all online cpus; 3) call
+tdx_enable().  For example::
+
+        cpus_read_lock();
+        on_each_cpu(vmxon_and_tdx_cpu_enable());
+        ret = tdx_enable();
+        cpus_read_unlock();
+        if (ret)
+                goto no_tdx;
+        // TDX is ready to use
+
+And the caller of TDX must guarantee the tdx_cpu_enable() has been
+successfully done on any cpu before it wants to run any other SEAMCALL.
+A typical usage is do both VMXON and tdx_cpu_enable() in CPU hotplug
+online callback, and refuse to online if tdx_cpu_enable() fails.
+
+User can consult dmesg to see whether the TDX module has been initialized.
+
+If the TDX module is initialized successfully, dmesg shows something
+like below::
+
+  [..] virt/tdx: 262668 KBs allocated for PAMT
+  [..] virt/tdx: module initialized
+
+If the TDX module failed to initialize, dmesg also shows it failed to
+initialize::
+
+  [..] virt/tdx: module initialization failed ...
+
+TDX Interaction to Other Kernel Components
+------------------------------------------
+
+TDX Memory Policy
+~~~~~~~~~~~~~~~~~
+
+TDX reports a list of "Convertible Memory Region" (CMR) to tell the
+kernel which memory is TDX compatible.  The kernel needs to build a list
+of memory regions (out of CMRs) as "TDX-usable" memory and pass those
+regions to the TDX module.  Once this is done, those "TDX-usable" memory
+regions are fixed during module's lifetime.
+
+To keep things simple, currently the kernel simply guarantees all pages
+in the page allocator are TDX memory.  Specifically, the kernel uses all
+system memory in the core-mm "at the time of TDX module initialization"
+as TDX memory, and in the meantime, refuses to online any non-TDX-memory
+in the memory hotplug.
+
+Physical Memory Hotplug
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Note TDX assumes convertible memory is always physically present during
+machine's runtime.  A non-buggy BIOS should never support hot-removal of
+any convertible memory.  This implementation doesn't handle ACPI memory
+removal but depends on the BIOS to behave correctly.
+
+CPU Hotplug
+~~~~~~~~~~~
+
+TDX module requires the per-cpu initialization SEAMCALL must be done on
+one cpu before any other SEAMCALLs can be made on that cpu.  The kernel
+provides tdx_cpu_enable() to let the user of TDX to do it when the user
+wants to use a new cpu for TDX task.
+
+TDX doesn't support physical (ACPI) CPU hotplug.  During machine boot,
+TDX verifies all boot-time present logical CPUs are TDX compatible before
+enabling TDX.  A non-buggy BIOS should never support hot-add/removal of
+physical CPU.  Currently the kernel doesn't handle physical CPU hotplug,
+but depends on the BIOS to behave correctly.
+
+Note TDX works with CPU logical online/offline, thus the kernel still
+allows to offline logical CPU and online it again.
+
+Kexec()
+~~~~~~~
+
+TDX host support currently lacks the ability to handle kexec.  For
+simplicity only one of them can be enabled in the Kconfig.  This will be
+fixed in the future.
+
+Erratum
+~~~~~~~
+
+The first few generations of TDX hardware have an erratum.  A partial
+write to a TDX private memory cacheline will silently "poison" the
+line.  Subsequent reads will consume the poison and generate a machine
+check.
+
+A partial write is a memory write where a write transaction of less than
+cacheline lands at the memory controller.  The CPU does these via
+non-temporal write instructions (like MOVNTI), or through UC/WC memory
+mappings.  Devices can also do partial writes via DMA.
+
+Theoretically, a kernel bug could do partial write to TDX private memory
+and trigger unexpected machine check.  What's more, the machine check
+code will present these as "Hardware error" when they were, in fact, a
+software-triggered issue.  But in the end, this issue is hard to trigger.
+
+If the platform has such erratum, the kernel prints additional message in
+machine check handler to tell user the machine check may be caused by
+kernel bug on TDX private memory.
+
+Interaction vs S3 and deeper states
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+TDX cannot survive from S3 and deeper states.  The hardware resets and
+disables TDX completely when platform goes to S3 and deeper.  Both TDX
+guests and the TDX module get destroyed permanently.
+
+The kernel uses S3 for suspend-to-ram, and use S4 and deeper states for
+hibernation.  Currently, for simplicity, the kernel chooses to make TDX
+mutually exclusive with S3 and hibernation.
+
+The kernel disables TDX during early boot when hibernation support is
+available::
+
+  [..] virt/tdx: initialization failed: Hibernation support is enabled
+
+Add 'nohibernate' kernel command line to disable hibernation in order to
+use TDX.
+
+ACPI S3 is disabled during kernel early boot if TDX is enabled.  The user
+needs to turn off TDX in the BIOS in order to use S3.
+
+TDX Guest Support
+=================
 Since the host cannot directly access guest registers or memory, much
 normal functionality of a hypervisor must be moved into the guest. This is
 implemented using a Virtualization Exception (#VE) that is handled by the
@@ -20,7 +205,7 @@ TDX includes new hypercall-like mechanisms for communicating from the
 guest to the hypervisor or the TDX module.
 
 New TDX Exceptions
-==================
+------------------
 
 TDX guests behave differently from bare-metal and traditional VMX guests.
 In TDX guests, otherwise normal instructions or memory accesses can cause
@@ -30,7 +215,7 @@ Instructions marked with an '*' conditionally cause exceptions.  The
 details for these instructions are discussed below.
 
 Instruction-based #VE
----------------------
+~~~~~~~~~~~~~~~~~~~~~
 
 - Port I/O (INS, OUTS, IN, OUT)
 - HLT
@@ -41,7 +226,7 @@ Instruction-based #VE
 - CPUID*
 
 Instruction-based #GP
----------------------
+~~~~~~~~~~~~~~~~~~~~~
 
 - All VMX instructions: INVEPT, INVVPID, VMCLEAR, VMFUNC, VMLAUNCH,
   VMPTRLD, VMPTRST, VMREAD, VMRESUME, VMWRITE, VMXOFF, VMXON
@@ -52,7 +237,7 @@ Instruction-based #GP
 - RDMSR*,WRMSR*
 
 RDMSR/WRMSR Behavior
---------------------
+~~~~~~~~~~~~~~~~~~~~
 
 MSR access behavior falls into three categories:
 
@@ -73,7 +258,7 @@ trapping and handling in the TDX module.  Other than possibly being slow,
 these MSRs appear to function just as they would on bare metal.
 
 CPUID Behavior
---------------
+~~~~~~~~~~~~~~
 
 For some CPUID leaves and sub-leaves, the virtualized bit fields of CPUID
 return values (in guest EAX/EBX/ECX/EDX) are configurable by the
@@ -93,7 +278,7 @@ not know how to handle. The guest kernel may ask the hypervisor for the
 value with a hypercall.
 
 #VE on Memory Accesses
-======================
+----------------------
 
 There are essentially two classes of TDX memory: private and shared.
 Private memory receives full TDX protections.  Its content is protected
@@ -107,7 +292,7 @@ entries.  This helps ensure that a guest does not place sensitive
 information in shared memory, exposing it to the untrusted hypervisor.
 
 #VE on Shared Memory
---------------------
+~~~~~~~~~~~~~~~~~~~~
 
 Access to shared mappings can cause a #VE.  The hypervisor ultimately
 controls whether a shared memory access causes a #VE, so the guest must be
@@ -127,7 +312,7 @@ be careful not to access device MMIO regions unless it is also prepared to
 handle a #VE.
 
 #VE on Private Pages
---------------------
+~~~~~~~~~~~~~~~~~~~~
 
 An access to private mappings can also cause a #VE.  Since all kernel
 memory is also private memory, the kernel might theoretically need to
@@ -145,7 +330,7 @@ The hypervisor is permitted to unilaterally move accepted pages to a
 to handle the exception.
 
 Linux #VE handler
-=================
+-----------------
 
 Just like page faults or #GP's, #VE exceptions can be either handled or be
 fatal.  Typically, an unhandled userspace #VE results in a SIGSEGV.
@@ -167,7 +352,7 @@ While the block is in place, any #VE is elevated to a double fault (#DF)
 which is not recoverable.
 
 MMIO handling
-=============
+-------------
 
 In non-TDX VMs, MMIO is usually implemented by giving a guest access to a
 mapping which will cause a VMEXIT on access, and then the hypervisor
@@ -189,7 +374,7 @@ MMIO access via other means (like structure overlays) may result in an
 oops.
 
 Shared Memory Conversions
-=========================
+-------------------------
 
 All TDX guest memory starts out as private at boot.  This memory can not
 be accessed by the hypervisor.  However, some kernel users like device
diff --git linux-libre-6.7-gnu/Documentation/arch/xtensa/features.rst linux-libre-6.8-gnu/Documentation/arch/xtensa/features.rst
index 6b92c7bfa19d..28dcce1759be 100644
--- linux-libre-6.7-gnu/Documentation/arch/xtensa/features.rst
+++ linux-libre-6.8-gnu/Documentation/arch/xtensa/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features xtensa
+.. kernel-feat:: features xtensa
diff --git linux-libre-6.7-gnu/Documentation/block/ioprio.rst linux-libre-6.8-gnu/Documentation/block/ioprio.rst
index a25c6d5df87b..4662e1ff3d81 100644
--- linux-libre-6.7-gnu/Documentation/block/ioprio.rst
+++ linux-libre-6.8-gnu/Documentation/block/ioprio.rst
@@ -6,17 +6,16 @@ Block io priorities
 Intro
 -----
 
-With the introduction of cfq v3 (aka cfq-ts or time sliced cfq), basic io
-priorities are supported for reads on files.  This enables users to io nice
-processes or process groups, similar to what has been possible with cpu
-scheduling for ages.  This document mainly details the current possibilities
-with cfq; other io schedulers do not support io priorities thus far.
+The io priority feature enables users to io nice processes or process groups,
+similar to what has been possible with cpu scheduling for ages. Support for io
+priorities is io scheduler dependent and currently supported by bfq and
+mq-deadline.
 
 Scheduling classes
 ------------------
 
-CFQ implements three generic scheduling classes that determine how io is
-served for a process.
+Three generic scheduling classes are implemented for io priorities that
+determine how io is served for a process.
 
 IOPRIO_CLASS_RT: This is the realtime io class. This scheduling class is given
 higher priority than any other in the system, processes from this class are
diff --git linux-libre-6.7-gnu/Documentation/bpf/btf.rst linux-libre-6.8-gnu/Documentation/bpf/btf.rst
index e43c2fdafcd7..257a7e1cdf5d 100644
--- linux-libre-6.7-gnu/Documentation/bpf/btf.rst
+++ linux-libre-6.8-gnu/Documentation/bpf/btf.rst
@@ -272,10 +272,8 @@ In this case, if the base type is an int type, it must be a regular int type:
   * ``BTF_INT_OFFSET()`` must be 0.
   * ``BTF_INT_BITS()`` must be equal to ``{1,2,4,8,16} * 8``.
 
-The following kernel patch introduced ``kind_flag`` and explained why both
-modes exist:
-
-  https://github.com/torvalds/linux/commit/9d5f9f701b1891466fb3dbb1806ad97716f95cc3#diff-fa650a64fdd3968396883d2fe8215ff3
+Commit 9d5f9f701b18 introduced ``kind_flag`` and explains why both modes
+exist.
 
 2.2.6 BTF_KIND_ENUM
 ~~~~~~~~~~~~~~~~~~~
diff --git linux-libre-6.7-gnu/Documentation/bpf/cpumasks.rst linux-libre-6.8-gnu/Documentation/bpf/cpumasks.rst
index a22b6ad105fb..b5d47a04da5d 100644
--- linux-libre-6.7-gnu/Documentation/bpf/cpumasks.rst
+++ linux-libre-6.8-gnu/Documentation/bpf/cpumasks.rst
@@ -352,7 +352,7 @@ can be used to query the contents of cpumasks.
 
 .. kernel-doc:: kernel/bpf/cpumask.c
    :identifiers: bpf_cpumask_first bpf_cpumask_first_zero bpf_cpumask_first_and
-                 bpf_cpumask_test_cpu
+                 bpf_cpumask_test_cpu bpf_cpumask_weight
 
 .. kernel-doc:: kernel/bpf/cpumask.c
    :identifiers: bpf_cpumask_equal bpf_cpumask_intersects bpf_cpumask_subset
diff --git linux-libre-6.7-gnu/Documentation/bpf/fs_kfuncs.rst linux-libre-6.8-gnu/Documentation/bpf/fs_kfuncs.rst
new file mode 100644
index 000000000000..8762c3233a3d
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/bpf/fs_kfuncs.rst
@@ -0,0 +1,21 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _fs_kfuncs-header-label:
+
+=====================
+BPF filesystem kfuncs
+=====================
+
+BPF LSM programs need to access filesystem data from LSM hooks. The following
+BPF kfuncs can be used to get these data.
+
+ * ``bpf_get_file_xattr()``
+
+ * ``bpf_get_fsverity_digest()``
+
+To avoid recursions, these kfuncs follow the following rules:
+
+1. These kfuncs are only permitted from BPF LSM function.
+2. These kfuncs should not call into other LSM hooks, i.e. security_*(). For
+   example, ``bpf_get_file_xattr()`` does not use ``vfs_getxattr()``, because
+   the latter calls LSM hook ``security_inode_getxattr``.
diff --git linux-libre-6.7-gnu/Documentation/bpf/index.rst linux-libre-6.8-gnu/Documentation/bpf/index.rst
index aeaeb35e6d4a..0bb5cb8157f1 100644
--- linux-libre-6.7-gnu/Documentation/bpf/index.rst
+++ linux-libre-6.8-gnu/Documentation/bpf/index.rst
@@ -21,6 +21,7 @@ that goes into great technical depth about the BPF Architecture.
    helpers
    kfuncs
    cpumasks
+   fs_kfuncs
    programs
    maps
    bpf_prog_run
diff --git linux-libre-6.7-gnu/Documentation/bpf/kfuncs.rst linux-libre-6.8-gnu/Documentation/bpf/kfuncs.rst
index 723408e399ab..7985c6615f3c 100644
--- linux-libre-6.7-gnu/Documentation/bpf/kfuncs.rst
+++ linux-libre-6.8-gnu/Documentation/bpf/kfuncs.rst
@@ -135,6 +135,30 @@ Either way, the returned buffer is either NULL, or of size buffer_szk. Without t
 annotation, the verifier will reject the program if a null pointer is passed in with
 a nonzero size.
 
+2.2.5 __str Annotation
+----------------------------
+This annotation is used to indicate that the argument is a constant string.
+
+An example is given below::
+
+        __bpf_kfunc bpf_get_file_xattr(..., const char *name__str, ...)
+        {
+        ...
+        }
+
+In this case, ``bpf_get_file_xattr()`` can be called as::
+
+        bpf_get_file_xattr(..., "xattr_name", ...);
+
+Or::
+
+        const char name[] = "xattr_name";  /* This need to be global */
+        int BPF_PROG(...)
+        {
+                ...
+                bpf_get_file_xattr(..., name, ...);
+                ...
+        }
 
 .. _BPF_kfunc_nodef:
 
diff --git linux-libre-6.7-gnu/Documentation/conf.py linux-libre-6.8-gnu/Documentation/conf.py
index d4fdf6a3875a..da64c9fb7e07 100644
--- linux-libre-6.7-gnu/Documentation/conf.py
+++ linux-libre-6.8-gnu/Documentation/conf.py
@@ -47,7 +47,7 @@ from load_config import loadConfig
 # -- General configuration ------------------------------------------------
 
 # If your documentation needs a minimal Sphinx version, state it here.
-needs_sphinx = '1.7'
+needs_sphinx = '2.4.4'
 
 # Add any Sphinx extension module names here, as strings. They can be
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
@@ -55,7 +55,7 @@ needs_sphinx = '1.7'
 extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include',
               'kfigure', 'sphinx.ext.ifconfig', 'automarkup',
               'maintainers_include', 'sphinx.ext.autosectionlabel',
-              'kernel_abi', 'kernel_feat']
+              'kernel_abi', 'kernel_feat', 'translations']
 
 if major >= 3:
     if (major > 3) or (minor > 0 or patch >= 2):
@@ -106,6 +106,7 @@ if major >= 3:
             "__weak",
             "noinline",
             "__fix_address",
+            "__counted_by",
 
             # include/linux/memblock.h:
             "__init_memblock",
@@ -357,6 +358,10 @@ html_sidebars = { '**': ['searchbox.html', 'kernel-toc.html', 'sourcelink.html']
 if html_theme == 'alabaster':
     html_sidebars['**'].insert(0, 'about.html')
 
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+html_logo = 'images/logo.svg'
+
 # Output file base name for HTML help builder.
 htmlhelp_basename = 'TheLinuxKerneldoc'
 
@@ -383,6 +388,12 @@ latex_elements = {
         verbatimhintsturnover=false,
     ''',
 
+    #
+    # Some of our authors are fond of deep nesting; tell latex to
+    # cope.
+    #
+    'maxlistdepth': '10',
+
     # For CJK One-half spacing, need to be in front of hyperref
     'extrapackages': r'\usepackage{setspace}',
 
diff --git linux-libre-6.7-gnu/Documentation/core-api/dma-api-howto.rst linux-libre-6.8-gnu/Documentation/core-api/dma-api-howto.rst
index 72f6cdb6be1c..e8a55f9d61db 100644
--- linux-libre-6.7-gnu/Documentation/core-api/dma-api-howto.rst
+++ linux-libre-6.8-gnu/Documentation/core-api/dma-api-howto.rst
@@ -8,7 +8,7 @@ Dynamic DMA mapping Guide
 
 This is a guide to device driver writers on how to use the DMA API
 with example pseudo-code.  For a concise description of the API, see
-DMA-API.txt.
+Documentation/core-api/dma-api.rst.
 
 CPU and DMA addresses
 =====================
diff --git linux-libre-6.7-gnu/Documentation/core-api/dma-api.rst linux-libre-6.8-gnu/Documentation/core-api/dma-api.rst
index 829f20a193ca..8e3cce3d0a23 100644
--- linux-libre-6.7-gnu/Documentation/core-api/dma-api.rst
+++ linux-libre-6.8-gnu/Documentation/core-api/dma-api.rst
@@ -448,7 +448,7 @@ DMA address entries returned.
 
 Synchronise a single contiguous or scatter/gather mapping for the CPU
 and device. With the sync_sg API, all the parameters must be the same
-as those passed into the single mapping API. With the sync_single API,
+as those passed into the sg mapping API. With the sync_single API,
 you can use dma_handle and size parameters that aren't identical to
 those passed into the single mapping API to do a partial sync.
 
diff --git linux-libre-6.7-gnu/Documentation/core-api/maple_tree.rst linux-libre-6.8-gnu/Documentation/core-api/maple_tree.rst
index 96f3d5f076b5..ccdd1615cf97 100644
--- linux-libre-6.7-gnu/Documentation/core-api/maple_tree.rst
+++ linux-libre-6.8-gnu/Documentation/core-api/maple_tree.rst
@@ -81,6 +81,9 @@ section.
 Sometimes it is necessary to ensure the next call to store to a maple tree does
 not allocate memory, please see :ref:`maple-tree-advanced-api` for this use case.
 
+You can use mtree_dup() to duplicate an entire maple tree. It is a more
+efficient way than inserting all elements one by one into a new tree.
+
 Finally, you can remove all entries from a maple tree by calling
 mtree_destroy().  If the maple tree entries are pointers, you may wish to free
 the entries first.
@@ -112,6 +115,7 @@ Takes ma_lock internally:
  * mtree_insert()
  * mtree_insert_range()
  * mtree_erase()
+ * mtree_dup()
  * mtree_destroy()
  * mt_set_in_rcu()
  * mt_clear_in_rcu()
diff --git linux-libre-6.7-gnu/Documentation/core-api/mm-api.rst linux-libre-6.8-gnu/Documentation/core-api/mm-api.rst
index 2d091c873d1e..af8151db88b2 100644
--- linux-libre-6.7-gnu/Documentation/core-api/mm-api.rst
+++ linux-libre-6.8-gnu/Documentation/core-api/mm-api.rst
@@ -37,7 +37,7 @@ The Slab Cache
 .. kernel-doc:: include/linux/slab.h
    :internal:
 
-.. kernel-doc:: mm/slab.c
+.. kernel-doc:: mm/slub.c
    :export:
 
 .. kernel-doc:: mm/slab_common.c
diff --git linux-libre-6.7-gnu/Documentation/core-api/pin_user_pages.rst linux-libre-6.8-gnu/Documentation/core-api/pin_user_pages.rst
index d3c1f6d8c0e0..6b5f7e6e7155 100644
--- linux-libre-6.7-gnu/Documentation/core-api/pin_user_pages.rst
+++ linux-libre-6.8-gnu/Documentation/core-api/pin_user_pages.rst
@@ -153,6 +153,8 @@ NOTE: Some pages, such as DAX pages, cannot be pinned with longterm pins. That's
 because DAX pages do not have a separate page cache, and so "pinning" implies
 locking down file system blocks, which is not (yet) supported in that way.
 
+.. _mmu-notifier-registration-case:
+
 CASE 3: MMU notifier registration, with or without page faulting hardware
 -------------------------------------------------------------------------
 Device drivers can pin pages via get_user_pages*(), and register for mmu
diff --git linux-libre-6.7-gnu/Documentation/core-api/workqueue.rst linux-libre-6.8-gnu/Documentation/core-api/workqueue.rst
index 0046af06531a..3599cf9267b4 100644
--- linux-libre-6.7-gnu/Documentation/core-api/workqueue.rst
+++ linux-libre-6.8-gnu/Documentation/core-api/workqueue.rst
@@ -379,7 +379,7 @@ Workqueue currently supports the following affinity scopes.
   cases. This is the default affinity scope.
 
 ``numa``
-  CPUs are grouped according to NUMA bounaries.
+  CPUs are grouped according to NUMA boundaries.
 
 ``system``
   All CPUs are put in the same group. Workqueue makes no effort to process a
@@ -446,7 +446,7 @@ The command used: ::
 
 There are 24 issuers, each issuing 64 IOs concurrently. ``--verify=sha512``
 makes ``fio`` generate and read back the content each time which makes
-execution locality matter between the issuer and ``kcryptd``. The followings
+execution locality matter between the issuer and ``kcryptd``. The following
 are the read bandwidths and CPU utilizations depending on different affinity
 scope settings on ``kcryptd`` measured over five runs. Bandwidths are in
 MiBps, and CPU util in percents.
diff --git linux-libre-6.7-gnu/Documentation/crypto/api.rst linux-libre-6.8-gnu/Documentation/crypto/api.rst
index b91b31736df8..ff31c30561d4 100644
--- linux-libre-6.7-gnu/Documentation/crypto/api.rst
+++ linux-libre-6.8-gnu/Documentation/crypto/api.rst
@@ -1,11 +1,8 @@
 Programming Interface
 =====================
 
-.. class:: toc-title
-
-	   Table of contents
-
 .. toctree::
+   :caption: Table of contents
    :maxdepth: 2
 
    api-skcipher
diff --git linux-libre-6.7-gnu/Documentation/crypto/device_drivers/index.rst linux-libre-6.8-gnu/Documentation/crypto/device_drivers/index.rst
new file mode 100644
index 000000000000..c81d311ac61b
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/crypto/device_drivers/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Hardware Device Driver Specific Documentation
+---------------------------------------------
+
+.. toctree::
+   :maxdepth: 1
+
+   octeontx2
diff --git linux-libre-6.7-gnu/Documentation/crypto/device_drivers/octeontx2.rst linux-libre-6.8-gnu/Documentation/crypto/device_drivers/octeontx2.rst
new file mode 100644
index 000000000000..7e469b173ac8
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/crypto/device_drivers/octeontx2.rst
@@ -0,0 +1,25 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+octeontx2 devlink support
+=========================
+
+This document describes the devlink features implemented by the ``octeontx2 CPT``
+device drivers.
+
+Parameters
+==========
+
+The ``octeontx2`` driver implements the following driver-specific parameters.
+
+.. list-table:: Driver-specific parameters implemented
+   :widths: 5 5 5 85
+
+   * - Name
+     - Type
+     - Mode
+     - Description
+   * - ``t106_mode``
+     - u8
+     - runtime
+     - Used to configure CN10KA B0/CN10KB CPT to work as CN10KA A0/A1.
diff --git linux-libre-6.7-gnu/Documentation/crypto/index.rst linux-libre-6.8-gnu/Documentation/crypto/index.rst
index da5d5ad2bdf3..92eec78b5713 100644
--- linux-libre-6.7-gnu/Documentation/crypto/index.rst
+++ linux-libre-6.8-gnu/Documentation/crypto/index.rst
@@ -9,11 +9,8 @@ This documentation outlines the Linux kernel crypto API with its
 concepts, details about developing cipher implementations, employment of the API
 for cryptographic use cases, as well as programming examples.
 
-.. class:: toc-title
-
-	   Table of contents
-
 .. toctree::
+   :caption: Table of contents
    :maxdepth: 2
 
    intro
@@ -28,3 +25,4 @@ for cryptographic use cases, as well as programming examples.
    api
    api-samples
    descore-readme
+   device_drivers/index
diff --git linux-libre-6.7-gnu/Documentation/dev-tools/checkuapi.rst linux-libre-6.8-gnu/Documentation/dev-tools/checkuapi.rst
new file mode 100644
index 000000000000..9072f21b50b0
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/dev-tools/checkuapi.rst
@@ -0,0 +1,477 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+============
+UAPI Checker
+============
+
+The UAPI checker (``scripts/check-uapi.sh``) is a shell script which
+checks UAPI header files for userspace backwards-compatibility across
+the git tree.
+
+Options
+=======
+
+This section will describe the options with which ``check-uapi.sh``
+can be run.
+
+Usage::
+
+    check-uapi.sh [-b BASE_REF] [-p PAST_REF] [-j N] [-l ERROR_LOG] [-i] [-q] [-v]
+
+Available options::
+
+    -b BASE_REF    Base git reference to use for comparison. If unspecified or empty,
+                   will use any dirty changes in tree to UAPI files. If there are no
+                   dirty changes, HEAD will be used.
+    -p PAST_REF    Compare BASE_REF to PAST_REF (e.g. -p v6.1). If unspecified or empty,
+                   will use BASE_REF^1. Must be an ancestor of BASE_REF. Only headers
+                   that exist on PAST_REF will be checked for compatibility.
+    -j JOBS        Number of checks to run in parallel (default: number of CPU cores).
+    -l ERROR_LOG   Write error log to file (default: no error log is generated).
+    -i             Ignore ambiguous changes that may or may not break UAPI compatibility.
+    -q             Quiet operation.
+    -v             Verbose operation (print more information about each header being checked).
+
+Environmental args::
+
+    ABIDIFF  Custom path to abidiff binary
+    CC       C compiler (default is "gcc")
+    ARCH     Target architecture of C compiler (default is host arch)
+
+Exit codes::
+
+    0) Success
+    1) ABI difference detected
+    2) Prerequisite not met
+
+Examples
+========
+
+Basic Usage
+-----------
+
+First, let's try making a change to a UAPI header file that obviously
+won't break userspace::
+
+    cat << 'EOF' | patch -l -p1
+    --- a/include/uapi/linux/acct.h
+    +++ b/include/uapi/linux/acct.h
+    @@ -21,7 +21,9 @@
+     #include <asm/param.h>
+     #include <asm/byteorder.h>
+
+    -/*
+    +#define FOO
+    +
+    +/*
+      *  comp_t is a 16-bit "floating" point number with a 3-bit base 8
+      *  exponent and a 13-bit fraction.
+      *  comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
+    diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
+    EOF
+
+Now, let's use the script to validate::
+
+    % ./scripts/check-uapi.sh
+    Installing user-facing UAPI headers from dirty tree... OK
+    Installing user-facing UAPI headers from HEAD... OK
+    Checking changes to UAPI headers between HEAD and dirty tree...
+    All 912 UAPI headers compatible with x86 appear to be backwards compatible
+
+Let's add another change that *might* break userspace::
+
+    cat << 'EOF' | patch -l -p1
+    --- a/include/uapi/linux/bpf.h
+    +++ b/include/uapi/linux/bpf.h
+    @@ -74,7 +74,7 @@ struct bpf_insn {
+            __u8    dst_reg:4;      /* dest register */
+            __u8    src_reg:4;      /* source register */
+            __s16   off;            /* signed offset */
+    -       __s32   imm;            /* signed immediate constant */
+    +       __u32   imm;            /* unsigned immediate constant */
+     };
+
+     /* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */
+    EOF
+
+The script will catch this::
+
+    % ./scripts/check-uapi.sh
+    Installing user-facing UAPI headers from dirty tree... OK
+    Installing user-facing UAPI headers from HEAD... OK
+    Checking changes to UAPI headers between HEAD and dirty tree...
+    ==== ABI differences detected in include/linux/bpf.h from HEAD -> dirty tree ====
+        [C] 'struct bpf_insn' changed:
+          type size hasn't changed
+          1 data member change:
+            type of '__s32 imm' changed:
+              typedef name changed from __s32 to __u32 at int-ll64.h:27:1
+              underlying type 'int' changed:
+                type name changed from 'int' to 'unsigned int'
+                type size hasn't changed
+    ==================================================================================
+
+    error - 1/912 UAPI headers compatible with x86 appear _not_ to be backwards compatible
+
+In this case, the script is reporting the type change because it could
+break a userspace program that passes in a negative number. Now, let's
+say you know that no userspace program could possibly be using a negative
+value in ``imm``, so changing to an unsigned type there shouldn't hurt
+anything. You can pass the ``-i`` flag to the script to ignore changes
+in which the userspace backwards compatibility is ambiguous::
+
+    % ./scripts/check-uapi.sh -i
+    Installing user-facing UAPI headers from dirty tree... OK
+    Installing user-facing UAPI headers from HEAD... OK
+    Checking changes to UAPI headers between HEAD and dirty tree...
+    All 912 UAPI headers compatible with x86 appear to be backwards compatible
+
+Now, let's make a similar change that *will* break userspace::
+
+    cat << 'EOF' | patch -l -p1
+    --- a/include/uapi/linux/bpf.h
+    +++ b/include/uapi/linux/bpf.h
+    @@ -71,8 +71,8 @@ enum {
+
+     struct bpf_insn {
+            __u8    code;           /* opcode */
+    -       __u8    dst_reg:4;      /* dest register */
+            __u8    src_reg:4;      /* source register */
+    +       __u8    dst_reg:4;      /* dest register */
+            __s16   off;            /* signed offset */
+            __s32   imm;            /* signed immediate constant */
+     };
+    EOF
+
+Since we're re-ordering an existing struct member, there's no ambiguity,
+and the script will report the breakage even if you pass ``-i``::
+
+    % ./scripts/check-uapi.sh -i
+    Installing user-facing UAPI headers from dirty tree... OK
+    Installing user-facing UAPI headers from HEAD... OK
+    Checking changes to UAPI headers between HEAD and dirty tree...
+    ==== ABI differences detected in include/linux/bpf.h from HEAD -> dirty tree ====
+        [C] 'struct bpf_insn' changed:
+          type size hasn't changed
+          2 data member changes:
+            '__u8 dst_reg' offset changed from 8 to 12 (in bits) (by +4 bits)
+            '__u8 src_reg' offset changed from 12 to 8 (in bits) (by -4 bits)
+    ==================================================================================
+
+    error - 1/912 UAPI headers compatible with x86 appear _not_ to be backwards compatible
+
+Let's commit the breaking change, then commit the innocuous change::
+
+    % git commit -m 'Breaking UAPI change' include/uapi/linux/bpf.h
+    [detached HEAD f758e574663a] Breaking UAPI change
+     1 file changed, 1 insertion(+), 1 deletion(-)
+    % git commit -m 'Innocuous UAPI change' include/uapi/linux/acct.h
+    [detached HEAD 2e87df769081] Innocuous UAPI change
+     1 file changed, 3 insertions(+), 1 deletion(-)
+
+Now, let's run the script again with no arguments::
+
+    % ./scripts/check-uapi.sh
+    Installing user-facing UAPI headers from HEAD... OK
+    Installing user-facing UAPI headers from HEAD^1... OK
+    Checking changes to UAPI headers between HEAD^1 and HEAD...
+    All 912 UAPI headers compatible with x86 appear to be backwards compatible
+
+It doesn't catch any breaking change because, by default, it only
+compares ``HEAD`` to ``HEAD^1``. The breaking change was committed on
+``HEAD~2``. If we wanted the search scope to go back further, we'd have to
+use the ``-p`` option to pass a different past reference. In this case,
+let's pass ``-p HEAD~2`` to the script so it checks UAPI changes between
+``HEAD~2`` and ``HEAD``::
+
+    % ./scripts/check-uapi.sh -p HEAD~2
+    Installing user-facing UAPI headers from HEAD... OK
+    Installing user-facing UAPI headers from HEAD~2... OK
+    Checking changes to UAPI headers between HEAD~2 and HEAD...
+    ==== ABI differences detected in include/linux/bpf.h from HEAD~2 -> HEAD ====
+        [C] 'struct bpf_insn' changed:
+          type size hasn't changed
+          2 data member changes:
+            '__u8 dst_reg' offset changed from 8 to 12 (in bits) (by +4 bits)
+            '__u8 src_reg' offset changed from 12 to 8 (in bits) (by -4 bits)
+    ==============================================================================
+
+    error - 1/912 UAPI headers compatible with x86 appear _not_ to be backwards compatible
+
+Alternatively, we could have also run with ``-b HEAD~``. This would set the
+base reference to ``HEAD~`` so then the script would compare it to ``HEAD~^1``.
+
+Architecture-specific Headers
+-----------------------------
+
+Consider this change::
+
+    cat << 'EOF' | patch -l -p1
+    --- a/arch/arm64/include/uapi/asm/sigcontext.h
+    +++ b/arch/arm64/include/uapi/asm/sigcontext.h
+    @@ -70,6 +70,7 @@ struct sigcontext {
+     struct _aarch64_ctx {
+            __u32 magic;
+            __u32 size;
+    +       __u32 new_var;
+     };
+
+     #define FPSIMD_MAGIC   0x46508001
+    EOF
+
+This is a change to an arm64-specific UAPI header file. In this example, I'm
+running the script from an x86 machine with an x86 compiler, so, by default,
+the script only checks x86-compatible UAPI header files::
+
+    % ./scripts/check-uapi.sh
+    Installing user-facing UAPI headers from dirty tree... OK
+    Installing user-facing UAPI headers from HEAD... OK
+    No changes to UAPI headers were applied between HEAD and dirty tree
+
+With an x86 compiler, we can't check header files in ``arch/arm64``, so the
+script doesn't even try.
+
+If we want to check the header file, we'll have to use an arm64 compiler and
+set ``ARCH`` accordingly::
+
+    % CC=aarch64-linux-gnu-gcc ARCH=arm64 ./scripts/check-uapi.sh
+    Installing user-facing UAPI headers from dirty tree... OK
+    Installing user-facing UAPI headers from HEAD... OK
+    Checking changes to UAPI headers between HEAD and dirty tree...
+    ==== ABI differences detected in include/asm/sigcontext.h from HEAD -> dirty tree ====
+        [C] 'struct _aarch64_ctx' changed:
+          type size changed from 64 to 96 (in bits)
+          1 data member insertion:
+            '__u32 new_var', at offset 64 (in bits) at sigcontext.h:73:1
+        -- snip --
+        [C] 'struct zt_context' changed:
+          type size changed from 128 to 160 (in bits)
+          2 data member changes (1 filtered):
+            '__u16 nregs' offset changed from 64 to 96 (in bits) (by +32 bits)
+            '__u16 __reserved[3]' offset changed from 80 to 112 (in bits) (by +32 bits)
+    =======================================================================================
+
+    error - 1/884 UAPI headers compatible with arm64 appear _not_ to be backwards compatible
+
+We can see with ``ARCH`` and ``CC`` set properly for the file, the ABI
+change is reported properly. Also notice that the total number of UAPI
+header files checked by the script changes. This is because the number
+of headers installed for arm64 platforms is different than x86.
+
+Cross-Dependency Breakages
+--------------------------
+
+Consider this change::
+
+    cat << 'EOF' | patch -l -p1
+    --- a/include/uapi/linux/types.h
+    +++ b/include/uapi/linux/types.h
+    @@ -52,7 +52,7 @@ typedef __u32 __bitwise __wsum;
+     #define __aligned_be64 __be64 __attribute__((aligned(8)))
+     #define __aligned_le64 __le64 __attribute__((aligned(8)))
+
+    -typedef unsigned __bitwise __poll_t;
+    +typedef unsigned short __bitwise __poll_t;
+
+     #endif /*  __ASSEMBLY__ */
+     #endif /* _UAPI_LINUX_TYPES_H */
+    EOF
+
+Here, we're changing a ``typedef`` in ``types.h``. This doesn't break
+a UAPI in ``types.h``, but other UAPIs in the tree may break due to
+this change::
+
+    % ./scripts/check-uapi.sh
+    Installing user-facing UAPI headers from dirty tree... OK
+    Installing user-facing UAPI headers from HEAD... OK
+    Checking changes to UAPI headers between HEAD and dirty tree...
+    ==== ABI differences detected in include/linux/eventpoll.h from HEAD -> dirty tree ====
+        [C] 'struct epoll_event' changed:
+          type size changed from 96 to 80 (in bits)
+          2 data member changes:
+            type of '__poll_t events' changed:
+              underlying type 'unsigned int' changed:
+                type name changed from 'unsigned int' to 'unsigned short int'
+                type size changed from 32 to 16 (in bits)
+            '__u64 data' offset changed from 32 to 16 (in bits) (by -16 bits)
+    ========================================================================================
+    include/linux/eventpoll.h did not change between HEAD and dirty tree...
+    It's possible a change to one of the headers it includes caused this error:
+    #include <linux/fcntl.h>
+    #include <linux/types.h>
+
+Note that the script noticed the failing header file did not change,
+so it assumes one of its includes must have caused the breakage. Indeed,
+we can see ``linux/types.h`` is used from ``eventpoll.h``.
+
+UAPI Header Removals
+--------------------
+
+Consider this change::
+
+    cat << 'EOF' | patch -l -p1
+    diff --git a/include/uapi/asm-generic/Kbuild b/include/uapi/asm-generic/Kbuild
+    index ebb180aac74e..a9c88b0a8b3b 100644
+    --- a/include/uapi/asm-generic/Kbuild
+    +++ b/include/uapi/asm-generic/Kbuild
+    @@ -31,6 +31,6 @@ mandatory-y += stat.h
+     mandatory-y += statfs.h
+     mandatory-y += swab.h
+     mandatory-y += termbits.h
+    -mandatory-y += termios.h
+    +#mandatory-y += termios.h
+     mandatory-y += types.h
+     mandatory-y += unistd.h
+    EOF
+
+This script removes a UAPI header file from the install list. Let's run
+the script::
+
+    % ./scripts/check-uapi.sh
+    Installing user-facing UAPI headers from dirty tree... OK
+    Installing user-facing UAPI headers from HEAD... OK
+    Checking changes to UAPI headers between HEAD and dirty tree...
+    ==== UAPI header include/asm/termios.h was removed between HEAD and dirty tree ====
+
+    error - 1/912 UAPI headers compatible with x86 appear _not_ to be backwards compatible
+
+Removing a UAPI header is considered a breaking change, and the script
+will flag it as such.
+
+Checking Historic UAPI Compatibility
+------------------------------------
+
+You can use the ``-b`` and ``-p`` options to examine different chunks of your
+git tree. For example, to check all changed UAPI header files between tags
+v6.0 and v6.1, you'd run::
+
+    % ./scripts/check-uapi.sh -b v6.1 -p v6.0
+    Installing user-facing UAPI headers from v6.1... OK
+    Installing user-facing UAPI headers from v6.0... OK
+    Checking changes to UAPI headers between v6.0 and v6.1...
+
+    --- snip ---
+    error - 37/907 UAPI headers compatible with x86 appear _not_ to be backwards compatible
+
+Note: Before v5.3, a header file needed by the script is not present,
+so the script is unable to check changes before then.
+
+You'll notice that the script detected many UAPI changes that are not
+backwards compatible. Knowing that kernel UAPIs are supposed to be stable
+forever, this is an alarming result. This brings us to the next section:
+caveats.
+
+Caveats
+=======
+
+The UAPI checker makes no assumptions about the author's intention, so some
+types of changes may be flagged even though they intentionally break UAPI.
+
+Removals For Refactoring or Deprecation
+---------------------------------------
+
+Sometimes drivers for very old hardware are removed, such as in this example::
+
+    % ./scripts/check-uapi.sh -b ba47652ba655
+    Installing user-facing UAPI headers from ba47652ba655... OK
+    Installing user-facing UAPI headers from ba47652ba655^1... OK
+    Checking changes to UAPI headers between ba47652ba655^1 and ba47652ba655...
+    ==== UAPI header include/linux/meye.h was removed between ba47652ba655^1 and ba47652ba655 ====
+
+    error - 1/910 UAPI headers compatible with x86 appear _not_ to be backwards compatible
+
+The script will always flag removals (even if they're intentional).
+
+Struct Expansions
+-----------------
+
+Depending on how a structure is handled in kernelspace, a change which
+expands a struct could be non-breaking.
+
+If a struct is used as the argument to an ioctl, then the kernel driver
+must be able to handle ioctl commands of any size. Beyond that, you need
+to be careful when copying data from the user. Say, for example, that
+``struct foo`` is changed like this::
+
+    struct foo {
+        __u64 a; /* added in version 1 */
+    +   __u32 b; /* added in version 2 */
+    +   __u32 c; /* added in version 2 */
+    }
+
+By default, the script will flag this kind of change for further review::
+
+    [C] 'struct foo' changed:
+      type size changed from 64 to 128 (in bits)
+      2 data member insertions:
+        '__u32 b', at offset 64 (in bits)
+        '__u32 c', at offset 96 (in bits)
+
+However, it is possible that this change was made safely.
+
+If a userspace program was built with version 1, it will think
+``sizeof(struct foo)`` is 8. That size will be encoded in the
+ioctl value that gets sent to the kernel. If the kernel is built
+with version 2, it will think the ``sizeof(struct foo)`` is 16.
+
+The kernel can use the ``_IOC_SIZE`` macro to get the size encoded
+in the ioctl code that the user passed in and then use
+``copy_struct_from_user()`` to safely copy the value::
+
+    int handle_ioctl(unsigned long cmd, unsigned long arg)
+    {
+        switch _IOC_NR(cmd) {
+        0x01: {
+            struct foo my_cmd;  /* size 16 in the kernel */
+
+            ret = copy_struct_from_user(&my_cmd, arg, sizeof(struct foo), _IOC_SIZE(cmd));
+            ...
+
+``copy_struct_from_user`` will zero the struct in the kernel and then copy
+only the bytes passed in from the user (leaving new members zeroized).
+If the user passed in a larger struct, the extra members are ignored.
+
+If you know this situation is accounted for in the kernel code, you can
+pass ``-i`` to the script, and struct expansions like this will be ignored.
+
+Flex Array Migration
+--------------------
+
+While the script handles expansion into an existing flex array, it does
+still flag initial migration to flex arrays from 1-element fake flex
+arrays. For example::
+
+    struct foo {
+          __u32 x;
+    -     __u32 flex[1]; /* fake flex */
+    +     __u32 flex[];  /* real flex */
+    };
+
+This change would be flagged by the script::
+
+    [C] 'struct foo' changed:
+      type size changed from 64 to 32 (in bits)
+      1 data member change:
+        type of '__u32 flex[1]' changed:
+          type name changed from '__u32[1]' to '__u32[]'
+          array type size changed from 32 to 'unknown'
+          array type subrange 1 changed length from 1 to 'unknown'
+
+At this time, there's no way to filter these types of changes, so be
+aware of this possible false positive.
+
+Summary
+-------
+
+While many types of false positives are filtered out by the script,
+it's possible there are some cases where the script flags a change
+which does not break UAPI. It's also possible a change which *does*
+break userspace would not be flagged by this script. While the script
+has been run on much of the kernel history, there could still be corner
+cases that are not accounted for.
+
+The intention is for this script to be used as a quick check for
+maintainers or automated tooling, not as the end-all authority on
+patch compatibility. It's best to remember: use your best judgment
+(and ideally a unit test in userspace) to make sure your UAPI changes
+are backwards-compatible!
diff --git linux-libre-6.7-gnu/Documentation/dev-tools/index.rst linux-libre-6.8-gnu/Documentation/dev-tools/index.rst
index 6b0663075dc0..efa49cdc8e2e 100644
--- linux-libre-6.7-gnu/Documentation/dev-tools/index.rst
+++ linux-libre-6.8-gnu/Documentation/dev-tools/index.rst
@@ -10,11 +10,8 @@ whole; patches welcome!
 A brief overview of testing-specific tools can be found in
 Documentation/dev-tools/testing-overview.rst
 
-.. class:: toc-title
-
-	   Table of contents
-
 .. toctree::
+   :caption: Table of contents
    :maxdepth: 2
 
    testing-overview
@@ -34,6 +31,7 @@ Documentation/dev-tools/testing-overview.rst
    kselftest
    kunit/index
    ktap
+   checkuapi
 
 
 .. only::  subproject and html
diff --git linux-libre-6.7-gnu/Documentation/dev-tools/kunit/api/resource.rst linux-libre-6.8-gnu/Documentation/dev-tools/kunit/api/resource.rst
index 0a94f831259e..ec6002a6b0db 100644
--- linux-libre-6.7-gnu/Documentation/dev-tools/kunit/api/resource.rst
+++ linux-libre-6.8-gnu/Documentation/dev-tools/kunit/api/resource.rst
@@ -11,3 +11,12 @@ state on a per-test basis, register custom cleanup actions, and more.
 
 .. kernel-doc:: include/kunit/resource.h
    :internal:
+
+Managed Devices
+---------------
+
+Functions for using KUnit-managed struct device and struct device_driver.
+Include ``kunit/device.h`` to use these.
+
+.. kernel-doc:: include/kunit/device.h
+   :internal:
diff --git linux-libre-6.7-gnu/Documentation/dev-tools/kunit/run_manual.rst linux-libre-6.8-gnu/Documentation/dev-tools/kunit/run_manual.rst
index e7b46421f247..699d92885075 100644
--- linux-libre-6.7-gnu/Documentation/dev-tools/kunit/run_manual.rst
+++ linux-libre-6.8-gnu/Documentation/dev-tools/kunit/run_manual.rst
@@ -49,9 +49,52 @@ loaded.
 
 The results will appear in TAP format in ``dmesg``.
 
+debugfs
+=======
+
+KUnit can be accessed from userspace via the debugfs filesystem (See more
+information about debugfs at Documentation/filesystems/debugfs.rst).
+
+If ``CONFIG_KUNIT_DEBUGFS`` is enabled, the KUnit debugfs filesystem is
+mounted at /sys/kernel/debug/kunit. You can use this filesystem to perform
+the following actions.
+
+Retrieve Test Results
+=====================
+
+You can use debugfs to retrieve KUnit test results. The test results are
+accessible from the debugfs filesystem in the following read-only file:
+
+.. code-block :: bash
+
+	/sys/kernel/debug/kunit/<test_suite>/results
+
+The test results are printed in a KTAP document. Note this document is separate
+to the kernel log and thus, may have different test suite numbering.
+
+Run Tests After Kernel Has Booted
+=================================
+
+You can use the debugfs filesystem to trigger built-in tests to run after
+boot. To run the test suite, you can use the following command to write to
+the ``/sys/kernel/debug/kunit/<test_suite>/run`` file:
+
+.. code-block :: bash
+
+	echo "any string" > /sys/kernel/debugfs/kunit/<test_suite>/run
+
+As a result, the test suite runs and the results are printed to the kernel
+log.
+
+However, this feature is not available with KUnit suites that use init data,
+because init data may have been discarded after the kernel boots. KUnit
+suites that use init data should be defined using the
+kunit_test_init_section_suites() macro.
+
+Also, you cannot use this feature to run tests concurrently. Instead a test
+will wait to run until other tests have completed or failed.
+
 .. note ::
 
-	If ``CONFIG_KUNIT_DEBUGFS`` is enabled, KUnit test results will
-	be accessible from the ``debugfs`` filesystem (if mounted).
-	They will be in ``/sys/kernel/debug/kunit/<test_suite>/results``, in
-	TAP format.
+	For test authors, to use this feature, tests will need to correctly initialise
+	and/or clean up any data, so the test runs correctly a second time.
diff --git linux-libre-6.7-gnu/Documentation/dev-tools/kunit/running_tips.rst linux-libre-6.8-gnu/Documentation/dev-tools/kunit/running_tips.rst
index 766f9cdea0fa..bd689db6fdd2 100644
--- linux-libre-6.7-gnu/Documentation/dev-tools/kunit/running_tips.rst
+++ linux-libre-6.8-gnu/Documentation/dev-tools/kunit/running_tips.rst
@@ -139,6 +139,17 @@ If your installed version of gcc doesn't work, you can tweak the steps:
 	$ ./tools/testing/kunit/kunit.py run --make_options=CC=/usr/bin/gcc-6
 	$ lcov -t "my_kunit_tests" -o coverage.info -c -d .kunit/ --gcov-tool=/usr/bin/gcov-6
 
+Alternatively, LLVM-based toolchains can also be used:
+
+.. code-block:: bash
+
+	# Build with LLVM and append coverage options to the current config
+	$ ./tools/testing/kunit/kunit.py run --make_options LLVM=1 --kunitconfig=.kunit/ --kunitconfig=tools/testing/kunit/configs/coverage_uml.config
+	$ llvm-profdata merge -sparse default.profraw -o default.profdata
+	$ llvm-cov export --format=lcov .kunit/vmlinux -instr-profile default.profdata > coverage.info
+	# The coverage.info file is in lcov-compatible format and it can be used to e.g. generate HTML report
+	$ genhtml -o /tmp/coverage_html coverage.info
+
 
 Running tests manually
 ======================
@@ -428,3 +439,10 @@ This attribute indicates the name of the module associated with the test.
 
 This attribute is automatically saved as a string and is printed for each suite.
 Tests can also be filtered using this attribute.
+
+``is_init``
+
+This attribute indicates whether the test uses init data or functions.
+
+This attribute is automatically saved as a boolean and tests can also be
+filtered using this attribute.
diff --git linux-libre-6.7-gnu/Documentation/dev-tools/kunit/usage.rst linux-libre-6.8-gnu/Documentation/dev-tools/kunit/usage.rst
index c27e1646ecd9..22955d56b379 100644
--- linux-libre-6.7-gnu/Documentation/dev-tools/kunit/usage.rst
+++ linux-libre-6.8-gnu/Documentation/dev-tools/kunit/usage.rst
@@ -566,13 +566,9 @@ By reusing the same ``cases`` array from above, we can write the test as a
 		},
 	};
 
-	// Need a helper function to generate a name for each test case.
-	static void case_to_desc(const struct sha1_test_case *t, char *desc)
-	{
-		strcpy(desc, t->str);
-	}
-	// Creates `sha1_gen_params()` to iterate over `cases`.
-	KUNIT_ARRAY_PARAM(sha1, cases, case_to_desc);
+	// Creates `sha1_gen_params()` to iterate over `cases` while using
+	// the struct member `str` for the case description.
+	KUNIT_ARRAY_PARAM_DESC(sha1, cases, str);
 
 	// Looks no different from a normal test.
 	static void sha1_test(struct kunit *test)
@@ -588,7 +584,7 @@ By reusing the same ``cases`` array from above, we can write the test as a
 	}
 
 	// Instead of KUNIT_CASE, we use KUNIT_CASE_PARAM and pass in the
-	// function declared by KUNIT_ARRAY_PARAM.
+	// function declared by KUNIT_ARRAY_PARAM or KUNIT_ARRAY_PARAM_DESC.
 	static struct kunit_case sha1_test_cases[] = {
 		KUNIT_CASE_PARAM(sha1_test, sha1_gen_params),
 		{}
@@ -651,12 +647,16 @@ For example:
 	}
 
 Note that, for functions like device_unregister which only accept a single
-pointer-sized argument, it's possible to directly cast that function to
-a ``kunit_action_t`` rather than writing a wrapper function, for example:
+pointer-sized argument, it's possible to automatically generate a wrapper
+with the ``KUNIT_DEFINE_ACTION_WRAPPER()`` macro, for example:
 
 .. code-block:: C
 
-	kunit_add_action(test, (kunit_action_t *)&device_unregister, &dev);
+	KUNIT_DEFINE_ACTION_WRAPPER(device_unregister, device_unregister_wrapper, struct device *);
+	kunit_add_action(test, &device_unregister_wrapper, &dev);
+
+You should do this in preference to manually casting to the ``kunit_action_t`` type,
+as casting function pointers will break Control Flow Integrity (CFI).
 
 ``kunit_add_action`` can fail if, for example, the system is out of memory.
 You can use ``kunit_add_action_or_reset`` instead which runs the action
@@ -671,8 +671,23 @@ Testing Static Functions
 ------------------------
 
 If we do not want to expose functions or variables for testing, one option is to
-conditionally ``#include`` the test file at the end of your .c file. For
-example:
+conditionally export the used symbol. For example:
+
+.. code-block:: c
+
+	/* In my_file.c */
+
+	VISIBLE_IF_KUNIT int do_interesting_thing();
+	EXPORT_SYMBOL_IF_KUNIT(do_interesting_thing);
+
+	/* In my_file.h */
+
+	#if IS_ENABLED(CONFIG_KUNIT)
+		int do_interesting_thing(void);
+	#endif
+
+Alternatively, you could conditionally ``#include`` the test file at the end of
+your .c file. For example:
 
 .. code-block:: c
 
@@ -793,3 +808,53 @@ structures as shown below:
 KUnit is not enabled, or if no test is running in the current task, it will do
 nothing. This compiles down to either a no-op or a static key check, so will
 have a negligible performance impact when no test is running.
+
+Managing Fake Devices and Drivers
+---------------------------------
+
+When testing drivers or code which interacts with drivers, many functions will
+require a ``struct device`` or ``struct device_driver``. In many cases, setting
+up a real device is not required to test any given function, so a fake device
+can be used instead.
+
+KUnit provides helper functions to create and manage these fake devices, which
+are internally of type ``struct kunit_device``, and are attached to a special
+``kunit_bus``. These devices support managed device resources (devres), as
+described in Documentation/driver-api/driver-model/devres.rst
+
+To create a KUnit-managed ``struct device_driver``, use ``kunit_driver_create()``,
+which will create a driver with the given name, on the ``kunit_bus``. This driver
+will automatically be destroyed when the corresponding test finishes, but can also
+be manually destroyed with ``driver_unregister()``.
+
+To create a fake device, use the ``kunit_device_register()``, which will create
+and register a device, using a new KUnit-managed driver created with ``kunit_driver_create()``.
+To provide a specific, non-KUnit-managed driver, use ``kunit_device_register_with_driver()``
+instead. Like with managed drivers, KUnit-managed fake devices are automatically
+cleaned up when the test finishes, but can be manually cleaned up early with
+``kunit_device_unregister()``.
+
+The KUnit devices should be used in preference to ``root_device_register()``, and
+instead of ``platform_device_register()`` in cases where the device is not otherwise
+a platform device.
+
+For example:
+
+.. code-block:: c
+
+	#include <kunit/device.h>
+
+	static void test_my_device(struct kunit *test)
+	{
+		struct device *fake_device;
+		const char *dev_managed_string;
+
+		// Create a fake device.
+		fake_device = kunit_device_register(test, "my_device");
+		KUNIT_ASSERT_NOT_ERR_OR_NULL(test, fake_device)
+
+		// Pass it to functions which need a device.
+		dev_managed_string = devm_kstrdup(fake_device, "Hello, World!");
+
+		// Everything is cleaned up automatically when the test ends.
+	}
\ No newline at end of file
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/Makefile linux-libre-6.8-gnu/Documentation/devicetree/bindings/Makefile
index 3e886194b043..129cf698fa8a 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/Makefile
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/Makefile
@@ -28,7 +28,10 @@ $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE
 find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
 		-name 'processed-schema*' \)
 
-find_cmd = $(find_all_cmd) | grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))"
+find_cmd = $(find_all_cmd) | \
+		sed 's|^$(srctree)/||' | \
+		grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | \
+		sed 's|^|$(srctree)/|'
 CHK_DT_DOCS := $(shell $(find_cmd))
 
 quiet_cmd_yamllint = LINT    $(src)
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml
index a9fe01238a88..76b65ea149b6 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml
@@ -16,7 +16,7 @@ maintainers:
 
 properties:
   compatible:
-    const: "calxeda,hb-sregs-l2-ecc"
+    const: calxeda,hb-sregs-l2-ecc
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/cpus.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/cpus.yaml
index ffd526363fda..cc5a21b47e26 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/cpus.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -198,6 +198,7 @@ properties:
       - qcom,kryo660
       - qcom,kryo685
       - qcom,kryo780
+      - qcom,oryon
       - qcom,scorpion
 
   enable-method:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/fsl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/fsl.yaml
index 32b195852a75..228dcc5c7d6f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/fsl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -967,6 +967,7 @@ properties:
               - menlo,mx8menlo                       # Verdin iMX8M Mini Module on i.MX8MM Menlo board
               - toradex,verdin-imx8mm-nonwifi-dahlia # Verdin iMX8M Mini Module on Dahlia
               - toradex,verdin-imx8mm-nonwifi-dev    # Verdin iMX8M Mini Module on Verdin Development Board
+              - toradex,verdin-imx8mm-nonwifi-mallow # Verdin iMX8M Mini Module on Mallow
               - toradex,verdin-imx8mm-nonwifi-yavia  # Verdin iMX8M Mini Module on Yavia
           - const: toradex,verdin-imx8mm-nonwifi     # Verdin iMX8M Mini Module without Wi-Fi / BT
           - const: toradex,verdin-imx8mm             # Verdin iMX8M Mini Module
@@ -977,6 +978,7 @@ properties:
           - enum:
               - toradex,verdin-imx8mm-wifi-dahlia # Verdin iMX8M Mini Wi-Fi / BT Module on Dahlia
               - toradex,verdin-imx8mm-wifi-dev    # Verdin iMX8M Mini Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-imx8mm-wifi-mallow # Verdin iMX8M Mini Wi-Fi / BT Module on Mallow
               - toradex,verdin-imx8mm-wifi-yavia  # Verdin iMX8M Mini Wi-Fi / BT Module on Yavia
           - const: toradex,verdin-imx8mm-wifi     # Verdin iMX8M Mini Wi-Fi / BT Module
           - const: toradex,verdin-imx8mm          # Verdin iMX8M Mini Module
@@ -1022,7 +1024,10 @@ properties:
 
       - description: Variscite VAR-SOM-MX8MN based boards
         items:
-          - const: variscite,var-som-mx8mn-symphony
+          - enum:
+              - dimonoff,gateway-evk # i.MX8MN Dimonoff Gateway EVK Board
+              - rve,rve-gateway # i.MX8MN RVE Gateway Board
+              - variscite,var-som-mx8mn-symphony
           - const: variscite,var-som-mx8mn
           - const: fsl,imx8mn
 
@@ -1048,6 +1053,9 @@ properties:
               - gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board
               - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
               - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board
+              - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel
+              - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel
+              - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel
               - toradex,verdin-imx8mp     # Verdin iMX8M Plus Modules
               - toradex,verdin-imx8mp-nonwifi  # Verdin iMX8M Plus Modules without Wi-Fi / BT
               - toradex,verdin-imx8mp-wifi  # Verdin iMX8M Plus Wi-Fi / BT Modules
@@ -1100,6 +1108,7 @@ properties:
           - enum:
               - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia
               - toradex,verdin-imx8mp-nonwifi-dev    # Verdin iMX8M Plus Module on Verdin Development Board
+              - toradex,verdin-imx8mp-nonwifi-mallow # Verdin iMX8M Plus Module on Mallow
               - toradex,verdin-imx8mp-nonwifi-yavia  # Verdin iMX8M Plus Module on Yavia
           - const: toradex,verdin-imx8mp-nonwifi     # Verdin iMX8M Plus Module without Wi-Fi / BT
           - const: toradex,verdin-imx8mp             # Verdin iMX8M Plus Module
@@ -1110,6 +1119,7 @@ properties:
           - enum:
               - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia
               - toradex,verdin-imx8mp-wifi-dev    # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-imx8mp-wifi-mallow # Verdin iMX8M Plus Wi-Fi / BT Module on Mallow
               - toradex,verdin-imx8mp-wifi-yavia  # Verdin iMX8M Plus Wi-Fi / BT Module on Yavia
           - const: toradex,verdin-imx8mp-wifi     # Verdin iMX8M Plus Wi-Fi / BT Module
           - const: toradex,verdin-imx8mp          # Verdin iMX8M Plus Module
@@ -1476,6 +1486,16 @@ properties:
           - const: solidrun,lx2162a-som
           - const: fsl,lx2160a
 
+      - description:
+          TQ-Systems TQMLX2160A is a series of socketable SOM featuring
+          LX2160A system-on-chip variants. MBLX2160A mainboard can be used a
+          starterkit.
+        items:
+          - enum:
+              - tq,lx2160a-tqmlx2160a-mblx2160a
+          - const: tq,lx2160a-tqmlx2160a
+          - const: fsl,lx2160a
+
       - description: S32G2 based Boards
         items:
           - enum:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/google.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/google.yaml
new file mode 100644
index 000000000000..e20b5c9b16bc
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/google.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/google.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Tensor platforms
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+  ARM platforms using SoCs designed by Google branded "Tensor" used in Pixel
+  devices.
+
+  Currently upstream this is devices using "gs101" SoC which is found in Pixel
+  6, Pixel 6 Pro and Pixel 6a.
+
+  Google have a few different names for the SoC:
+  - Marketing name ("Tensor")
+  - Codename ("Whitechapel")
+  - SoC ID ("gs101")
+  - Die ID ("S5P9845")
+
+  Likewise there are a couple of names for the actual device
+  - Marketing name ("Pixel 6")
+  - Codename ("Oriole")
+
+  Devicetrees should use the lowercased SoC ID and lowercased board codename,
+  e.g. gs101 and gs101-oriole.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Google Pixel 6 / Oriole
+        items:
+          - enum:
+              - google,gs101-oriole
+          - const: google,gs101
+
+  # Bootloader requires empty ect node to be present
+  ect:
+    type: object
+    additionalProperties: false
+
+required:
+  - ect
+
+additionalProperties: true
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
index 5a53d433b6f0..7a221e1c09df 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
@@ -82,6 +82,23 @@ properties:
 
   ranges: true
 
+patternProperties:
+  '^clock@':
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - hisilicon,hi3620-clock
+          - hisilicon,hi3620-mmc-clock
+
+      reg:
+        maxItems: 1
+
+      '#clock-cells':
+        const: 1
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
index 52d78521e412..16d2e132d3d1 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
@@ -60,4 +60,26 @@ properties:
           - const: marvell,armada-ap807-quad
           - const: marvell,armada-ap807
 
+      - description:
+          Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus
+          Armada CN9130 COM Express CPU module
+        items:
+          - const: marvell,cn9130-ac5x-carrier
+          - const: marvell,rd-ac5x-carrier
+          - const: marvell,cn9130-cpu-module
+          - const: marvell,cn9130
+          - const: marvell,armada-ap807-quad
+          - const: marvell,armada-ap807
+
+      - description:
+          Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus
+          Armada CN9131 COM Express CPU module
+        items:
+          - const: marvell,cn9131-ac5x-carrier
+          - const: marvell,rd-ac5x-carrier
+          - const: marvell,cn9131-cpu-module
+          - const: marvell,cn9131
+          - const: marvell,armada-ap807-quad
+          - const: marvell,armada-ap807
+
 additionalProperties: true
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml
index a5999b3afc35..6f2f64ae76fc 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -174,6 +174,10 @@ properties:
           - enum:
               - mediatek,mt8186-evb
           - const: mediatek,mt8186
+      - items:
+          - enum:
+              - mediatek,mt8188-evb
+          - const: mediatek,mt8188
       - items:
           - enum:
               - mediatek,mt8192-evb
@@ -235,6 +239,13 @@ properties:
         items:
           - const: google,kappa
           - const: mediatek,mt8183
+      - description: Google Katsu (ASUS Chromebook Detachable CZ1)
+        items:
+          - enum:
+              - google,katsu-sku32
+              - google,katsu-sku38
+          - const: google,katsu
+          - const: mediatek,mt8183
       - description: Google Kodama (Lenovo 10e Chromebook Tablet)
         items:
           - enum:
@@ -244,6 +255,20 @@ properties:
               - google,kodama-sku32
           - const: google,kodama
           - const: mediatek,mt8183
+      - description: Google Makomo (Lenovo 100e Chromebook 2nd Gen MTK 2)
+        items:
+          - enum:
+              - google,makomo-sku0
+              - google,makomo-sku1
+          - const: google,makomo
+          - const: mediatek,mt8183
+      - description: Google Pico (Acer Chromebook Spin 311)
+        items:
+          - enum:
+              - google,pico-sku1
+              - google,pico-sku2
+          - const: google,pico
+          - const: mediatek,mt8183
       - description: Google Willow (Acer Chromebook 311 C722/C722T)
         items:
           - enum:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
deleted file mode 100644
index 699776be1dd3..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-MediaTek AUDSYS controller
-============================
-
-The MediaTek AUDSYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-audsys", "syscon"
-	- "mediatek,mt6765-audsys", "syscon"
-	- "mediatek,mt6779-audio", "syscon"
-	- "mediatek,mt7622-audsys", "syscon"
-	- "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
-	- "mediatek,mt8167-audiosys", "syscon"
-	- "mediatek,mt8183-audiosys", "syscon"
-	- "mediatek,mt8192-audsys", "syscon"
-	- "mediatek,mt8516-audsys", "syscon"
-- #clock-cells: Must be 1
-
-The AUDSYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Required sub-nodes:
--------
-For common binding part and usage, refer to
-../sonud/mt2701-afe-pcm.txt.
-
-Example:
-
-	audsys: clock-controller@11220000 {
-		compatible = "mediatek,mt7622-audsys", "syscon";
-		reg = <0 0x11220000 0 0x2000>;
-		#clock-cells = <1>;
-
-		afe: audio-controller {
-			...
-		};
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml
new file mode 100644
index 000000000000..45d4a6620041
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,audsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek AUDSYS controller
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@collabora.com>
+
+description:
+  The MediaTek AUDSYS controller provides various clocks to the system.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-audsys
+              - mediatek,mt6765-audsys
+              - mediatek,mt6779-audsys
+              - mediatek,mt7622-audsys
+              - mediatek,mt8167-audsys
+              - mediatek,mt8173-audsys
+              - mediatek,mt8183-audsys
+              - mediatek,mt8186-audsys
+              - mediatek,mt8192-audsys
+              - mediatek,mt8516-audsys
+          - const: syscon
+      - items:
+          # Special case for mt7623 for backward compatibility
+          - const: mediatek,mt7623-audsys
+          - const: mediatek,mt2701-audsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  audio-controller:
+    $ref: /schemas/sound/mediatek,mt2701-audio.yaml#
+    type: object
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt2701-power.h>
+    #include <dt-bindings/clock/mt2701-clk.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        audsys: clock-controller@11220000 {
+            compatible = "mediatek,mt7622-audsys", "syscon";
+            reg = <0 0x11220000 0 0x2000>;
+            #clock-cells = <1>;
+
+            afe: audio-controller {
+                compatible = "mediatek,mt2701-audio";
+                interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+                             <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+                interrupt-names = "afe", "asys";
+                power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+                clocks = <&infracfg CLK_INFRA_AUDIO>,
+                         <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+                         <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+                         <&topckgen CLK_TOP_AUD_48K_TIMING>,
+                         <&topckgen CLK_TOP_AUD_44K_TIMING>,
+                         <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+                         <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+                         <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+                         <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+                         <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+                         <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+                         <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+                         <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+                         <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+                         <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+                         <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+                         <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+                         <&audsys CLK_AUD_I2SO1>,
+                         <&audsys CLK_AUD_I2SO2>,
+                         <&audsys CLK_AUD_I2SO3>,
+                         <&audsys CLK_AUD_I2SO4>,
+                         <&audsys CLK_AUD_I2SIN1>,
+                         <&audsys CLK_AUD_I2SIN2>,
+                         <&audsys CLK_AUD_I2SIN3>,
+                         <&audsys CLK_AUD_I2SIN4>,
+                         <&audsys CLK_AUD_ASRCO1>,
+                         <&audsys CLK_AUD_ASRCO2>,
+                         <&audsys CLK_AUD_ASRCO3>,
+                         <&audsys CLK_AUD_ASRCO4>,
+                         <&audsys CLK_AUD_AFE>,
+                         <&audsys CLK_AUD_AFE_CONN>,
+                         <&audsys CLK_AUD_A1SYS>,
+                         <&audsys CLK_AUD_A2SYS>,
+                         <&audsys CLK_AUD_AFE_MRGIF>;
+
+                clock-names = "infra_sys_audio_clk",
+                              "top_audio_mux1_sel",
+                              "top_audio_mux2_sel",
+                              "top_audio_a1sys_hp",
+                              "top_audio_a2sys_hp",
+                              "i2s0_src_sel",
+                              "i2s1_src_sel",
+                              "i2s2_src_sel",
+                              "i2s3_src_sel",
+                              "i2s0_src_div",
+                              "i2s1_src_div",
+                              "i2s2_src_div",
+                              "i2s3_src_div",
+                              "i2s0_mclk_en",
+                              "i2s1_mclk_en",
+                              "i2s2_mclk_en",
+                              "i2s3_mclk_en",
+                              "i2so0_hop_ck",
+                              "i2so1_hop_ck",
+                              "i2so2_hop_ck",
+                              "i2so3_hop_ck",
+                              "i2si0_hop_ck",
+                              "i2si1_hop_ck",
+                              "i2si2_hop_ck",
+                              "i2si3_hop_ck",
+                              "asrc0_out_ck",
+                              "asrc1_out_ck",
+                              "asrc2_out_ck",
+                              "asrc3_out_ck",
+                              "audio_afe_pd",
+                              "audio_afe_conn_pd",
+                              "audio_a1sys_pd",
+                              "audio_a2sys_pd",
+                              "audio_mrgif_pd";
+
+                assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+                                  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+                                  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+                                  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+                assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
+                                         <&topckgen CLK_TOP_AUD2PLL_90M>;
+                assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+            };
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
deleted file mode 100644
index eccd4b706a78..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Mediatek ethsys controller
-============================
-
-The Mediatek ethsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt2701-ethsys", "syscon"
-	- "mediatek,mt7622-ethsys", "syscon"
-	- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
-	- "mediatek,mt7629-ethsys", "syscon"
-	- "mediatek,mt7981-ethsys", "syscon"
-	- "mediatek,mt7986-ethsys", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The ethsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-ethsys: clock-controller@1b000000 {
-	compatible = "mediatek,mt2701-ethsys", "syscon";
-	reg = <0 0x1b000000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
index ea98043c6ba3..230b5188a88d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
@@ -30,6 +30,7 @@ properties:
               - mediatek,mt7629-infracfg
               - mediatek,mt7981-infracfg
               - mediatek,mt7986-infracfg
+              - mediatek,mt7988-infracfg
               - mediatek,mt8135-infracfg
               - mediatek,mt8167-infracfg
               - mediatek,mt8173-infracfg
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
index 536f5a5ebd24..b3c6888c1457 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
@@ -32,6 +32,9 @@ properties:
               - mediatek,mt8183-mmsys
               - mediatek,mt8186-mmsys
               - mediatek,mt8188-vdosys0
+              - mediatek,mt8188-vdosys1
+              - mediatek,mt8188-vppsys0
+              - mediatek,mt8188-vppsys1
               - mediatek,mt8192-mmsys
               - mediatek,mt8195-vdosys1
               - mediatek,mt8195-vppsys0
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
index 26158d0d72f3..33c94c491828 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
@@ -28,6 +28,7 @@ properties:
               - mediatek,mt8173-pericfg
               - mediatek,mt8183-pericfg
               - mediatek,mt8186-pericfg
+              - mediatek,mt8188-pericfg
               - mediatek,mt8195-pericfg
               - mediatek,mt8516-pericfg
           - const: syscon
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
deleted file mode 100644
index 606b4b1b709d..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-QCOM Idle States for cpuidle driver
-
-ARM provides idle-state node to define the cpuidle states, as defined in [1].
-cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle
-states. Idle states have different enter/exit latency and residency values.
-The idle states supported by the QCOM SoC are defined as -
-
-    * Standby
-    * Retention
-    * Standalone Power Collapse (Standalone PC or SPC)
-    * Power Collapse (PC)
-
-Standby: Standby does a little more in addition to architectural clock gating.
-When the WFI instruction is executed the ARM core would gate its internal
-clocks. In addition to gating the clocks, QCOM cpus use this instruction as a
-trigger to execute the SPM state machine. The SPM state machine waits for the
-interrupt to trigger the core back in to active. This triggers the cache
-hierarchy to enter standby states, when all cpus are idle. An interrupt brings
-the SPM state machine out of its wait, the next step is to ensure that the
-cache hierarchy is also out of standby, and then the cpu is allowed to resume
-execution. This state is defined as a generic ARM WFI state by the ARM cpuidle
-driver and is not defined in the DT. The SPM state machine should be
-configured to execute this state by default and after executing every other
-state below.
-
-Retention: Retention is a low power state where the core is clock gated and
-the memory and the registers associated with the core are retained. The
-voltage may be reduced to the minimum value needed to keep the processor
-registers active. The SPM should be configured to execute the retention
-sequence and would wait for interrupt, before restoring the cpu to execution
-state. Retention may have a slightly higher latency than Standby.
-
-Standalone PC: A cpu can power down and warmboot if there is a sufficient time
-between the time it enters idle and the next known wake up. SPC mode is used
-to indicate a core entering a power down state without consulting any other
-cpu or the system resources. This helps save power only on that core.  The SPM
-sequence for this idle state is programmed to power down the supply to the
-core, wait for the interrupt, restore power to the core, and ensure the
-system state including cache hierarchy is ready before allowing core to
-resume. Applying power and resetting the core causes the core to warmboot
-back into Elevation Level (EL) which trampolines the control back to the
-kernel. Entering a power down state for the cpu, needs to be done by trapping
-into a EL. Failing to do so, would result in a crash enforced by the warm boot
-code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to
-be flushed in s/w, before powering down the core.
-
-Power Collapse: This state is similar to the SPC mode, but distinguishes
-itself in that the cpu acknowledges and permits the SoC to enter deeper sleep
-modes. In a hierarchical power domain SoC, this means L2 and other caches can
-be flushed, system bus, clocks - lowered, and SoC main XO clock gated and
-voltages reduced, provided all cpus enter this state.  Since the span of low
-power modes possible at this state is vast, the exit latency and the residency
-of this low power mode would be considered high even though at a cpu level,
-this essentially is cpu power down. The SPM in this state also may handshake
-with the Resource power manager (RPM) processor in the SoC to indicate a
-complete application processor subsystem shut down.
-
-The idle-state for QCOM SoCs are distinguished by the compatible property of
-the idle-states device node.
-
-The devicetree representation of the idle state should be -
-
-Required properties:
-
-- compatible: Must be one of -
-			"qcom,idle-state-ret",
-			"qcom,idle-state-spc",
-			"qcom,idle-state-pc",
-		and "arm,idle-state".
-
-Other required and optional properties are specified in [1].
-
-Example:
-
-	idle-states {
-		CPU_SPC: spc {
-			compatible = "qcom,idle-state-spc", "arm,idle-state";
-			entry-latency-us = <150>;
-			exit-latency-us = <200>;
-			min-residency-us = <2000>;
-		};
-	};
-
-[1]. Documentation/devicetree/bindings/cpu/idle-states.yaml
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml
new file mode 100644
index 000000000000..4fd5752978cd
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-remote-etm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Coresight Remote ETM(Embedded Trace Macrocell)
+
+maintainers:
+  - Jinlong Mao <quic_jinlmao@quicinc.com>
+  - Tao Zhang <quic_taozha@quicinc.com>
+
+description:
+  Support for ETM trace collection on remote processor using coresight
+  framework. Enabling this will allow turning on ETM tracing on remote
+  processor like modem processor via sysfs and collecting the trace
+  via coresight TMC sinks.
+
+properties:
+  compatible:
+    const: qcom,coresight-remote-etm
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    etm {
+        compatible = "qcom,coresight-remote-etm";
+
+        out-ports {
+            port {
+                modem_etm0_out_funnel_modem: endpoint {
+                    remote-endpoint = <&funnel_modem_in_modem_etm0>;
+                };
+            };
+        };
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
index 3bad47b7b02b..61ddc3b5b247 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -44,6 +44,23 @@ properties:
     minItems: 1
     maxItems: 2
 
+  qcom,dsb-element-size:
+    description:
+      Specifies the DSB(Discrete Single Bit) element size supported by
+      the monitor. The associated aggregator will read this size before it
+      is enabled. DSB element size currently only supports 32-bit and 64-bit.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [32, 64]
+
+  qcom,dsb-msrs-num:
+    description:
+      Specifies the number of DSB(Discrete Single Bit) MSR(mux select register)
+      registers supported by the monitor. If this property is not configured
+      or set to 0, it means this DSB TPDM doesn't support MSR.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 32
+
   clocks:
     maxItems: 1
 
@@ -77,6 +94,9 @@ examples:
       compatible = "qcom,coresight-tpdm", "arm,primecell";
       reg = <0x0684c000 0x1000>;
 
+      qcom,dsb-element-size = /bits/ 8 <32>;
+      qcom,dsb-msrs-num = <16>;
+
       clocks = <&aoss_qmp>;
       clock-names = "apb_pclk";
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/qcom-soc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/qcom-soc.yaml
index 97621c92a1ab..d0751a572af3 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/qcom-soc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/qcom-soc.yaml
@@ -23,7 +23,7 @@ description: |
 select:
   properties:
     compatible:
-      pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$"
   required:
     - compatible
 
@@ -31,17 +31,17 @@ properties:
   compatible:
     oneOf:
       # Preferred naming style for compatibles of SoC components:
-      - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+(pro)?-.*$"
+      - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+(pro)?-.*$"
       - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$"
 
       # Legacy namings - variations of existing patterns/compatibles are OK,
       # but do not add completely new entries to these:
-      - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
-      - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
-      - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
-      - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
-      - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
-      - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+      - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+      - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+      - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$"
+      - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+      - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$"
       - enum:
           - qcom,dsi-ctrl-6g-qcm2290
           - qcom,gpucc-sdm630
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/qcom.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
index 7f80f48a0954..1a5fb889a444 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -87,29 +87,18 @@ description: |
         sm8350
         sm8450
         sm8550
+        sm8650
+        x1e80100
 
   The 'board' element must be one of the following strings:
 
         adp
-        ap-al02-c2
-        ap-al02-c6
-        ap-al02-c7
-        ap-al02-c8
-        ap-al02-c9
-        ap-mi01.2
-        ap-mi01.3
-        ap-mi01.6
-        ap-mi01.9
         cdp
-        cp01-c1
         dragonboard
-        hk01
-        hk10-c1
-        hk10-c2
         idp
         liquid
-        rdp432-c2
         mtp
+        qcp
         qrd
         rb2
         ride
@@ -138,7 +127,7 @@ description: |
   There are many devices in the list below that run the standard ChromeOS
   bootloader setup and use the open source depthcharge bootloader to boot the
   OS. These devices do not use the scheme described above. For details, see:
-  https://docs.kernel.org/arm/google/chromebook-boot-flow.html
+  https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html
 
 properties:
   $nodename:
@@ -186,11 +175,24 @@ properties:
 
       - items:
           - enum:
+              - microsoft,dempsey
+              - microsoft,makepeace
+              - microsoft,moneypenny
               - samsung,s3ve3g
           - const: qcom,msm8226
 
       - items:
           - enum:
+              - htc,memul
+              - microsoft,superman-lte
+              - microsoft,tesla
+              - motorola,peregrine
+          - const: qcom,msm8926
+          - const: qcom,msm8226
+
+      - items:
+          - enum:
+              - huawei,kiwi
               - longcheer,l9100
               - samsung,a7
               - sony,kanuti-tulip
@@ -397,6 +399,8 @@ properties:
       - items:
           - enum:
               - fairphone,fp5
+              - qcom,qcm6490-idp
+              - qcom,qcs6490-rb3gen2
           - const: qcom,qcm6490
 
       - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform
@@ -1009,6 +1013,7 @@ properties:
               - sony,pdx203-generic
               - sony,pdx206-generic
               - xiaomi,elish
+              - xiaomi,pipa
           - const: qcom,sm8250
 
       - items:
@@ -1034,6 +1039,18 @@ properties:
               - qcom,sm8550-qrd
           - const: qcom,sm8550
 
+      - items:
+          - enum:
+              - qcom,sm8650-mtp
+              - qcom,sm8650-qrd
+          - const: qcom,sm8650
+
+      - items:
+          - enum:
+              - qcom,x1e80100-crd
+              - qcom,x1e80100-qcp
+          - const: qcom,x1e80100
+
   # Board compatibles go above
 
   qcom,msm-id:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml
index 5f7c6c4aad8f..5cf5cbef2cf5 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -30,9 +30,11 @@ properties:
           - const: amarula,vyasa-rk3288
           - const: rockchip,rk3288
 
-      - description: Anbernic RG351M
+      - description: Anbernic RK3326 Handheld Gaming Console
         items:
-          - const: anbernic,rg351m
+          - enum:
+              - anbernic,rg351m
+              - anbernic,rg351v
           - const: rockchip,rk3326
 
       - description: Anbernic RG353P
@@ -95,22 +97,30 @@ properties:
           - const: chipspark,rayeager-px2
           - const: rockchip,rk3066a
 
+      - description: Cool Pi Compute Module 5(CM5) EVB
+        items:
+          - enum:
+              - coolpi,pi-cm5-evb
+          - const: coolpi,pi-cm5
+          - const: rockchip,rk3588
+
+      - description: Cool Pi 4 Model B
+        items:
+          - const: coolpi,pi-4b
+          - const: rockchip,rk3588s
+
       - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards
         items:
           - const: edgeble,neural-compute-module-2-io   # Edgeble Neural Compute Module 2 IO Board
           - const: edgeble,neural-compute-module-2      # Edgeble Neural Compute Module 2 SoM
           - const: rockchip,rv1126
 
-      - description: Edgeble Neural Compute Module 6(Neu6) Model A SoM based boards
-        items:
-          - const: edgeble,neural-compute-module-6a-io  # Edgeble Neural Compute Module 6A IO Board
-          - const: edgeble,neural-compute-module-6a     # Edgeble Neural Compute Module 6A SoM
-          - const: rockchip,rk3588
-
-      - description: Edgeble Neural Compute Module 6(Neu6) Model B SoM based boards
+      - description: Edgeble Neural Compute Module 6(Neu6) SoM based boards
         items:
-          - const: edgeble,neural-compute-module-6b-io  # Edgeble Neural Compute Module 6B IO Board
-          - const: edgeble,neural-compute-module-6b     # Edgeble Neural Compute Module 6B SoM
+          - const: edgeble,neural-compute-module-6a-io  # Edgeble NCM6A-IO Board
+          - enum:
+              - edgeble,neural-compute-module-6a        # Edgeble Neural Compute Module 6A SoM
+              - edgeble,neural-compute-module-6b        # Edgeble Neural Compute Module 6B SoM
           - const: rockchip,rk3588
 
       - description: Elgin RV1108 R1
@@ -237,6 +247,11 @@ properties:
           - const: geekbuying,geekbox
           - const: rockchip,rk3368
 
+      - description: Geniatech XPI-3128
+        items:
+          - const: geniatech,xpi-3128
+          - const: rockchip,rk3128
+
       - description: Google Bob (Asus Chromebook Flip C101PA)
         items:
           - const: google,bob-rev13
@@ -674,9 +689,12 @@ properties:
           - const: pine64,soquartz
           - const: rockchip,rk3566
 
-      - description: Powkiddy RGB30
+      - description: Powkiddy RK3566 Handheld Gaming Console
         items:
-          - const: powkiddy,rgb30
+          - enum:
+              - powkiddy,rgb30
+              - powkiddy,rk2023
+              - powkiddy,x55
           - const: rockchip,rk3566
 
       - description: Radxa Compute Module 3(CM3)
@@ -875,6 +893,11 @@ properties:
           - const: tsd,rk3399-puma-haikou
           - const: rockchip,rk3399
 
+      - description: Theobroma Systems RK3588-SBC Jaguar
+        items:
+          - const: tsd,rk3588-jaguar
+          - const: rockchip,rk3588
+
       - description: Tronsmart Orion R68 Meta
         items:
           - const: tronsmart,orion-r68-meta
@@ -922,6 +945,13 @@ properties:
           - const: rockchip,rk3568-bpi-r2pro
           - const: rockchip,rk3568
 
+      - description: Sonoff iHost Smart Home Hub
+        items:
+          - const: itead,sonoff-ihost
+          - enum:
+              - rockchip,rv1126
+              - rockchip,rv1109
+
 additionalProperties: true
 
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index e3ffd8159ab6..01dcbd8aa703 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -230,6 +230,12 @@ properties:
               - samsung,exynosautov9-sadk   # Samsung Exynos Auto v9 SADK
           - const: samsung,exynosautov9
 
+      - description: Exynos Auto v920 based boards
+        items:
+          - enum:
+              - samsung,exynosautov920-sadk   # Samsung Exynos Auto v920 SADK
+          - const: samsung,exynosautov920
+
 required:
   - compatible
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/sprd/sprd.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
index eaa67b8e0d6c..40fc3c8b9dce 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
@@ -35,6 +35,11 @@ properties:
               - sprd,ums512-1h10
           - const: sprd,ums512
 
+      - items:
+          - enum:
+              - sprd,ums9620-2h10
+          - const: sprd,ums9620
+
 additionalProperties: true
 
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/stm32/stm32.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index df087c81c69e..bc2f43330ae4 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -82,29 +82,19 @@ properties:
               - shiratech,stm32mp157a-iot-box # IoT Box
               - shiratech,stm32mp157a-stinger96 # Stinger96
               - st,stm32mp157c-ed1
+              - st,stm32mp157c-ed1-scmi
               - st,stm32mp157a-dk1
+              - st,stm32mp157a-dk1-scmi
               - st,stm32mp157c-dk2
+              - st,stm32mp157c-dk2-scmi
           - const: st,stm32mp157
 
-      - items:
-          - const: st,stm32mp157a-dk1-scmi
-          - const: st,stm32mp157a-dk1
-          - const: st,stm32mp157
-      - items:
-          - const: st,stm32mp157c-dk2-scmi
-          - const: st,stm32mp157c-dk2
-          - const: st,stm32mp157
-      - items:
-          - const: st,stm32mp157c-ed1-scmi
-          - const: st,stm32mp157c-ed1
-          - const: st,stm32mp157
       - items:
           - const: st,stm32mp157c-ev1
           - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
       - items:
           - const: st,stm32mp157c-ev1-scmi
-          - const: st,stm32mp157c-ev1
           - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml
index 11c5ce941dd7..a9d8e85565b8 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -868,6 +868,11 @@ properties:
           - const: topwise,a721
           - const: allwinner,sun4i-a10
 
+      - description: Transpeed 8K618-T
+        items:
+          - const: transpeed,8k618-t
+          - const: allwinner,sun50i-h618
+
       - description: Utoo P66
         items:
           - const: utoo,p66
@@ -1013,6 +1018,11 @@ properties:
           - const: xunlong,orangepi-zero2
           - const: allwinner,sun50i-h616
 
+      - description: Xunlong OrangePi Zero 2W
+        items:
+          - const: xunlong,orangepi-zero2w
+          - const: allwinner,sun50i-h618
+
       - description: Xunlong OrangePi Zero 3
         items:
           - const: xunlong,orangepi-zero3
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml
index 03d2a0d79fb0..c6506bccfe88 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -50,6 +50,7 @@ properties:
           - enum:
               - toradex,verdin-am62-nonwifi-dahlia # Verdin AM62 Module on Dahlia
               - toradex,verdin-am62-nonwifi-dev    # Verdin AM62 Module on Verdin Development Board
+              - toradex,verdin-am62-nonwifi-mallow # Verdin AM62 Module on Mallow
               - toradex,verdin-am62-nonwifi-yavia  # Verdin AM62 Module on Yavia
           - const: toradex,verdin-am62-nonwifi     # Verdin AM62 Module without Wi-Fi / BT
           - const: toradex,verdin-am62             # Verdin AM62 Module
@@ -60,6 +61,7 @@ properties:
           - enum:
               - toradex,verdin-am62-wifi-dahlia # Verdin AM62 Wi-Fi / BT Module on Dahlia
               - toradex,verdin-am62-wifi-dev    # Verdin AM62 Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-am62-wifi-mallow # Verdin AM62 Wi-Fi / BT Module on Mallow
               - toradex,verdin-am62-wifi-yavia  # Verdin AM62 Wi-Fi / BT Module on Yavia
           - const: toradex,verdin-am62-wifi     # Verdin AM62 Wi-Fi / BT Module
           - const: toradex,verdin-am62          # Verdin AM62 Module
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/ti/omap.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/ti/omap.yaml
index b18fc046390a..93e04a109a12 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/ti/omap.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/ti/omap.yaml
@@ -134,6 +134,8 @@ properties:
               - amazon,omap4-kc1        # Amazon Kindle Fire (first generation)
               - motorola,droid4         # Motorola Droid 4 XT894
               - motorola,droid-bionic   # Motorola Droid Bionic XT875
+              - motorola,xyboard-mz609
+              - motorola,xyboard-mz617
               - ti,omap4-panda
               - ti,omap4-sdp
           - const: ti,omap4430
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
index b29ce598f9aa..9952e0ef7767 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Ceva AHCI SATA Controller
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@amd.com>
+  - Mubin Sayyed <mubin.sayyed@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 description: |
   The Ceva SATA controller mostly conforms to the AHCI interface with some
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
index fde07e4b119d..406a922a714e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -113,7 +113,7 @@ examples:
     hd44780 {
             compatible = "hit,hd44780";
             display-height-chars = <2>;
-            display-width-chars  = <16>;
+            display-width-chars = <16>;
             data-gpios = <&pcf8574 4 0>,
                          <&pcf8574 5 0>,
                          <&pcf8574 6 0>,
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
index 580f9a97ddf7..07ccbda4a0ab 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
@@ -33,6 +33,8 @@ properties:
       - qcom,sm8350-llcc
       - qcom,sm8450-llcc
       - qcom,sm8550-llcc
+      - qcom,sm8650-llcc
+      - qcom,x1e80100-llcc
 
   reg:
     minItems: 2
@@ -64,6 +66,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,qdu1000-llcc
               - qcom,sc7180-llcc
               - qcom,sm6350-llcc
     then:
@@ -101,9 +104,9 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,qdu1000-llcc
               - qcom,sc8180x-llcc
               - qcom,sc8280xp-llcc
+              - qcom,x1e80100-llcc
     then:
       properties:
         reg:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
index 8a6a78e1a7ab..7e8cebe21584 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
@@ -38,7 +38,9 @@ properties:
               - sifive,fu740-c000-ccache
           - const: cache
       - items:
-          - const: starfive,jh7110-ccache
+          - enum:
+              - starfive,jh7100-ccache
+              - starfive,jh7110-ccache
           - const: sifive,ccache0
           - const: cache
       - items:
@@ -88,6 +90,7 @@ allOf:
           contains:
             enum:
               - sifive,fu740-c000-ccache
+              - starfive,jh7100-ccache
               - starfive,jh7110-ccache
               - microchip,mpfs-ccache
 
@@ -111,6 +114,7 @@ allOf:
           contains:
             enum:
               - sifive,fu740-c000-ccache
+              - starfive,jh7100-ccache
               - starfive,jh7110-ccache
 
     then:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
index 624984d51c10..7f8d98226437 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
@@ -125,7 +125,7 @@ examples:
     clk25m: clock-oscillator-25m {
       compatible = "fixed-clock";
       #clock-cells = <0>;
-      clock-frequency  = <25000000>;
+      clock-frequency = <25000000>;
       clock-output-names = "clk25m";
     };
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
deleted file mode 100644
index 8e5a7d868557..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-Broadcom Kona Family Clocks
-
-This binding is associated with Broadcom SoCs having "Kona" style
-clock control units (CCUs).  A CCU is a clock provider that manages
-a set of clock signals.  Each CCU is represented by a node in the
-device tree.
-
-This binding uses the common clock binding:
-    Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible
-	Shall have a value of the form "brcm,<model>-<which>-ccu",
-	where <model> is a Broadcom SoC model number and <which> is
-	the name of a defined CCU.  For example:
-	    "brcm,bcm11351-root-ccu"
-	The compatible strings used for each supported SoC family
-	are defined below.
-- reg
-	Shall define the base and range of the address space
-	containing clock control registers
-- #clock-cells
-	Shall have value <1>.  The permitted clock-specifier values
-	are defined below.
-- clock-output-names
-	Shall be an ordered list of strings defining the names of
-	the clocks provided by the CCU.
-
-Device tree example:
-
-	slave_ccu: slave_ccu {
-		compatible = "brcm,bcm11351-slave-ccu";
-		reg = <0x3e011000 0x0f00>;
-		#clock-cells = <1>;
-		clock-output-names = "uartb",
-				     "uartb2",
-				     "uartb3",
-				     "uartb4";
-	};
-
-	ref_crystal_clk: ref_crystal {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	uart@3e002000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		reg = <0x3e002000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-BCM281XX family
----------------
-CCU compatible string values for SoCs in the BCM281XX family are:
-    "brcm,bcm11351-root-ccu"
-    "brcm,bcm11351-aon-ccu"
-    "brcm,bcm11351-hub-ccu"
-    "brcm,bcm11351-master-ccu"
-    "brcm,bcm11351-slave-ccu"
-
-The following table defines the set of CCUs and clock specifiers for
-BCM281XX family clocks.  When a clock consumer references a clocks,
-its symbolic specifier (rather than its numeric index value) should
-be used.  These specifiers are defined in:
-    "include/dt-bindings/clock/bcm281xx.h"
-
-    CCU     Clock           Type    Index   Specifier
-    ---     -----           ----    -----   ---------
-    root    frac_1m         peri      0     BCM281XX_ROOT_CCU_FRAC_1M
-
-    aon     hub_timer       peri      0     BCM281XX_AON_CCU_HUB_TIMER
-    aon     pmu_bsc         peri      1     BCM281XX_AON_CCU_PMU_BSC
-    aon     pmu_bsc_var     peri      2     BCM281XX_AON_CCU_PMU_BSC_VAR
-
-    hub     tmon_1m         peri      0     BCM281XX_HUB_CCU_TMON_1M
-
-    master  sdio1           peri      0     BCM281XX_MASTER_CCU_SDIO1
-    master  sdio2           peri      1     BCM281XX_MASTER_CCU_SDIO2
-    master  sdio3           peri      2     BCM281XX_MASTER_CCU_SDIO3
-    master  sdio4           peri      3     BCM281XX_MASTER_CCU_SDIO4
-    master  dmac            peri      4     BCM281XX_MASTER_CCU_DMAC
-    master  usb_ic          peri      5     BCM281XX_MASTER_CCU_USB_IC
-    master  hsic2_48m       peri      6     BCM281XX_MASTER_CCU_HSIC_48M
-    master  hsic2_12m       peri      7     BCM281XX_MASTER_CCU_HSIC_12M
-
-    slave   uartb           peri      0     BCM281XX_SLAVE_CCU_UARTB
-    slave   uartb2          peri      1     BCM281XX_SLAVE_CCU_UARTB2
-    slave   uartb3          peri      2     BCM281XX_SLAVE_CCU_UARTB3
-    slave   uartb4          peri      3     BCM281XX_SLAVE_CCU_UARTB4
-    slave   ssp0            peri      4     BCM281XX_SLAVE_CCU_SSP0
-    slave   ssp2            peri      5     BCM281XX_SLAVE_CCU_SSP2
-    slave   bsc1            peri      6     BCM281XX_SLAVE_CCU_BSC1
-    slave   bsc2            peri      7     BCM281XX_SLAVE_CCU_BSC2
-    slave   bsc3            peri      8     BCM281XX_SLAVE_CCU_BSC3
-    slave   pwm             peri      9     BCM281XX_SLAVE_CCU_PWM
-
-
-BCM21664 family
----------------
-CCU compatible string values for SoCs in the BCM21664 family are:
-    "brcm,bcm21664-root-ccu"
-    "brcm,bcm21664-aon-ccu"
-    "brcm,bcm21664-master-ccu"
-    "brcm,bcm21664-slave-ccu"
-
-The following table defines the set of CCUs and clock specifiers for
-BCM21664 family clocks.  When a clock consumer references a clocks,
-its symbolic specifier (rather than its numeric index value) should
-be used.  These specifiers are defined in:
-    "include/dt-bindings/clock/bcm21664.h"
-
-    CCU     Clock           Type    Index   Specifier
-    ---     -----           ----    -----   ---------
-    root    frac_1m         peri      0     BCM21664_ROOT_CCU_FRAC_1M
-
-    aon     hub_timer       peri      0     BCM21664_AON_CCU_HUB_TIMER
-
-    master  sdio1           peri      0     BCM21664_MASTER_CCU_SDIO1
-    master  sdio2           peri      1     BCM21664_MASTER_CCU_SDIO2
-    master  sdio3           peri      2     BCM21664_MASTER_CCU_SDIO3
-    master  sdio4           peri      3     BCM21664_MASTER_CCU_SDIO4
-    master  sdio1_sleep     peri      4     BCM21664_MASTER_CCU_SDIO1_SLEEP
-    master  sdio2_sleep     peri      5     BCM21664_MASTER_CCU_SDIO2_SLEEP
-    master  sdio3_sleep     peri      6     BCM21664_MASTER_CCU_SDIO3_SLEEP
-    master  sdio4_sleep     peri      7     BCM21664_MASTER_CCU_SDIO4_SLEEP
-
-    slave   uartb           peri      0     BCM21664_SLAVE_CCU_UARTB
-    slave   uartb2          peri      1     BCM21664_SLAVE_CCU_UARTB2
-    slave   uartb3          peri      2     BCM21664_SLAVE_CCU_UARTB3
-    slave   uartb4          peri      3     BCM21664_SLAVE_CCU_UARTB4
-    slave   bsc1            peri      4     BCM21664_SLAVE_CCU_BSC1
-    slave   bsc2            peri      5     BCM21664_SLAVE_CCU_BSC2
-    slave   bsc3            peri      6     BCM21664_SLAVE_CCU_BSC3
-    slave   bsc4            peri      7     BCM21664_SLAVE_CCU_BSC4
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/brcm,kona-ccu.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/brcm,kona-ccu.yaml
new file mode 100644
index 000000000000..e5656950b3bd
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/brcm,kona-ccu.yaml
@@ -0,0 +1,181 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,kona-ccu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family clock control units (CCU)
+
+maintainers:
+  - Florian Fainelli <florian.fainelli@broadcom.com>
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+description: |
+  Broadcom "Kona" style clock control unit (CCU) is a clock provider that
+  manages a set of clock signals.
+
+  All available clock IDs are defined in
+  - include/dt-bindings/clock/bcm281xx.h for BCM281XX family
+  - include/dt-bindings/clock/bcm21664.h for BCM21664 family
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm11351-aon-ccu
+      - brcm,bcm11351-hub-ccu
+      - brcm,bcm11351-master-ccu
+      - brcm,bcm11351-root-ccu
+      - brcm,bcm11351-slave-ccu
+      - brcm,bcm21664-aon-ccu
+      - brcm,bcm21664-master-ccu
+      - brcm,bcm21664-root-ccu
+      - brcm,bcm21664-slave-ccu
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 10
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clock-output-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-aon-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: hub_timer
+            - const: pmu_bsc
+            - const: pmu_bsc_var
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-hub-ccu
+    then:
+      properties:
+        clock-output-names:
+          const: tmon_1m
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-master-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: sdio1
+            - const: sdio2
+            - const: sdio3
+            - const: sdio4
+            - const: usb_ic
+            - const: hsic2_48m
+            - const: hsic2_12m
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm11351-root-ccu
+              - brcm,bcm21664-root-ccu
+    then:
+      properties:
+        clock-output-names:
+          const: frac_1m
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-slave-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: uartb
+            - const: uartb2
+            - const: uartb3
+            - const: uartb4
+            - const: ssp0
+            - const: ssp2
+            - const: bsc1
+            - const: bsc2
+            - const: bsc3
+            - const: pwm
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm21664-aon-ccu
+    then:
+      properties:
+        clock-output-names:
+          const: hub_timer
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm21664-master-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: sdio1
+            - const: sdio2
+            - const: sdio3
+            - const: sdio4
+            - const: sdio1_sleep
+            - const: sdio2_sleep
+            - const: sdio3_sleep
+            - const: sdio4_sleep
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm21664-slave-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: uartb
+            - const: uartb2
+            - const: uartb3
+            - const: bsc1
+            - const: bsc2
+            - const: bsc3
+            - const: bsc4
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@3e011000 {
+      compatible = "brcm,bcm11351-slave-ccu";
+      reg = <0x3e011000 0x0f00>;
+      #clock-cells = <1>;
+      clock-output-names = "uartb",
+                           "uartb2",
+                           "uartb3",
+                           "uartb4",
+                           "ssp0",
+                           "ssp2",
+                           "bsc1",
+                           "bsc2",
+                           "bsc3",
+                           "pwm";
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/fsl,imx93-anatop.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/fsl,imx93-anatop.yaml
new file mode 100644
index 000000000000..8a3b2476419a
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/fsl,imx93-anatop.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx93-anatop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 ANATOP Clock Module
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  NXP i.MX93 ANATOP module which contains PLL and OSC to Clock Controller
+  Module.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx93-anatop
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@44480000 {
+        compatible = "fsl,imx93-anatop";
+        reg = <0x44480000 0x2000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
new file mode 100644
index 000000000000..ca7fdada3ff2
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/google,gs101-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google GS101 SoC clock controller
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+  Google GS101 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that clock tree
+  is OSCCLK (24.576 MHz). That external clock must be defined as a fixed-rate
+  clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/gs101.h' header.
+
+properties:
+  compatible:
+    enum:
+      - google,gs101-cmu-top
+      - google,gs101-cmu-apm
+      - google,gs101-cmu-misc
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-cmu-top
+              - google,gs101-cmu-apm
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,gs101-cmu-misc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Misc bus clock (from CMU_TOP)
+            - description: Misc sss clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: bus
+            - const: sss
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_TOP
+  - |
+    #include <dt-bindings/clock/google,gs101.h>
+
+    cmu_top: clock-controller@1e080000 {
+        compatible = "google,gs101-cmu-top";
+        reg = <0x1e080000 0x8000>;
+        #clock-cells = <1>;
+        clocks = <&ext_24_5m>;
+        clock-names = "oscclk";
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/hi3620-clock.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/hi3620-clock.txt
deleted file mode 100644
index dad6269f52c5..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/hi3620-clock.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Hisilicon Hi3620 Clock Controller
-
-The Hi3620 clock controller generates and supplies clock to various
-controllers within the Hi3620 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC.
-  - "hisilicon,hi3620-mmc-clock" - controller specific for Hi3620 mmc.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes use this identifier
-to specify the clock which they consume.
-
-All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>.
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
index 372c1d744bc2..685535846cbb 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
@@ -22,6 +22,7 @@ properties:
           - mediatek,mt7622-apmixedsys
           - mediatek,mt7981-apmixedsys
           - mediatek,mt7986-apmixedsys
+          - mediatek,mt7988-apmixedsys
           - mediatek,mt8135-apmixedsys
           - mediatek,mt8173-apmixedsys
           - mediatek,mt8516-apmixedsys
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/mediatek,ethsys.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,ethsys.yaml
new file mode 100644
index 000000000000..f9cddacc2eae
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,ethsys.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,ethsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek ethsys controller
+
+description:
+  The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+maintainers:
+  - James Liao <jamesjj.liao@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-ethsys
+              - mediatek,mt7622-ethsys
+              - mediatek,mt7629-ethsys
+              - mediatek,mt7981-ethsys
+              - mediatek,mt7986-ethsys
+              - mediatek,mt7988-ethsys
+          - const: syscon
+      - items:
+          - const: mediatek,mt7623-ethsys
+          - const: mediatek,mt2701-ethsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1b000000 {
+        compatible = "mediatek,mt2701-ethsys", "syscon";
+        reg = <0x1b000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/mediatek,mt7988-ethwarp.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,mt7988-ethwarp.yaml
new file mode 100644
index 000000000000..e32a0251ff6a
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,mt7988-ethwarp.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7988-ethwarp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7988 ethwarp Controller
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+description:
+  The Mediatek MT7988 ethwarp controller provides clocks and resets for the
+  Ethernet related subsystems found the MT7988 SoC.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt7988-ethwarp
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/ti-syscon.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@15031000 {
+            compatible = "mediatek,mt7988-ethwarp";
+            reg = <0 0x15031000 0 0x1000>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/mediatek,mt7988-xfi-pll.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,mt7988-xfi-pll.yaml
new file mode 100644
index 000000000000..192f1451f0af
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,mt7988-xfi-pll.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7988-xfi-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7988 XFI PLL Clock Controller
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+description:
+  The MediaTek XFI PLL controller provides the 156.25MHz clock for the
+  Ethernet SerDes PHY from the 40MHz top_xtal clock.
+
+properties:
+  compatible:
+    const: mediatek,mt7988-xfi-pll
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - resets
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        clock-controller@11f40000 {
+            compatible = "mediatek,mt7988-xfi-pll";
+            reg = <0 0x11f40000 0 0x1000>;
+            resets = <&watchdog 16>;
+            #clock-cells = <1>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
index d7214d97b2ba..860570320545 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
@@ -43,8 +43,6 @@ properties:
       - mediatek,mt8188-vdecsys
       - mediatek,mt8188-vdecsys-soc
       - mediatek,mt8188-vencsys
-      - mediatek,mt8188-vppsys0
-      - mediatek,mt8188-vppsys1
       - mediatek,mt8188-wpesys
       - mediatek,mt8188-wpesys-vpp0
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
index 6d087ded7437..bdf3b55bd56f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
@@ -37,6 +37,8 @@ properties:
               - mediatek,mt7629-topckgen
               - mediatek,mt7981-topckgen
               - mediatek,mt7986-topckgen
+              - mediatek,mt7988-mcusys
+              - mediatek,mt7988-topckgen
               - mediatek,mt8167-topckgen
               - mediatek,mt8183-topckgen
           - const: syscon
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
index 9436266828af..5ca927a8b1d5 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
@@ -16,6 +16,7 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,ipq5018-a53pll
       - qcom,ipq5332-a53pll
       - qcom,ipq6018-a53pll
       - qcom,ipq8074-a53pll
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
index 426335a2841c..3fd3dc1069fb 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
@@ -15,6 +15,9 @@ description: |
 
   See also:: include/dt-bindings/clock/qcom,camcc-sm8250.h
 
+allOf:
+  - $ref: qcom,gcc.yaml#
+
 properties:
   compatible:
     const: qcom,sm8250-camcc
@@ -33,15 +36,6 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
   power-domains:
     items:
       - description: MMCX power domain
@@ -56,14 +50,10 @@ properties:
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml
new file mode 100644
index 000000000000..af5d883cfdc8
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq6018.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ6018
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Robert Marko <robimarko@gmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ6018.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-ipq6018.h
+    include/dt-bindings/reset/qcom,gcc-ipq6018.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq6018
+
+  clocks:
+    items:
+      - description: board XO clock
+      - description: sleep clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq6018";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo>, <&sleep_clk>;
+      clock-names = "xo", "sleep_clk";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
index 52e7831a8d6d..2d44ddc45aab 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
@@ -27,11 +27,15 @@ properties:
     items:
       - description: board XO clock
       - description: sleep clock
+      - description: Gen3 QMP PCIe PHY PIPE clock
+      - description: Gen2 QMP PCIe PHY PIPE clock
 
   clock-names:
     items:
       - const: xo
       - const: sleep_clk
+      - const: pcie0_pipe
+      - const: pcie1_pipe
 
 required:
   - compatible
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
index 559fc21435c8..7d05f0f63cef 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
@@ -15,8 +15,6 @@ description: |
   domains.
 
   See also::
-    include/dt-bindings/clock/qcom,gcc-ipq6018.h
-    include/dt-bindings/reset/qcom,gcc-ipq6018.h
     include/dt-bindings/clock/qcom,gcc-msm8953.h
     include/dt-bindings/clock/qcom,gcc-mdm9607.h
 
@@ -26,7 +24,6 @@ allOf:
 properties:
   compatible:
     enum:
-      - qcom,gcc-ipq6018
       - qcom,gcc-mdm9607
 
 required:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml
new file mode 100644
index 000000000000..fd21df0e7697
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qdu1000-ecpricc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ECPRI Clock & Reset Controller for QDU1000 and QRU1000
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Imran Shaik <quic_imrashai@quicinc.com>
+
+description: |
+  Qualcomm ECPRI Specification V2.0 Common Public Radio Interface clock control
+  module which supports the clocks, resets on QDU1000 and QRU1000
+
+  See also:: include/dt-bindings/clock/qcom,qdu1000-ecpricc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,qdu1000-ecpricc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL1 source from GCC
+      - description: GPLL2 source from GCC
+      - description: GPLL3 source from GCC
+      - description: GPLL4 source from GCC
+      - description: GPLL5 source from GCC
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,qdu1000-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@280000 {
+      compatible = "qcom,qdu1000-ecpricc";
+      reg = <0x00280000 0x31c00>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
index 4eb5e59f6772..ca857942ed6c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -35,6 +35,8 @@ properties:
       - qcom,sm8350-rpmh-clk
       - qcom,sm8450-rpmh-clk
       - qcom,sm8550-rpmh-clk
+      - qcom,sm8650-rpmh-clk
+      - qcom,x1e80100-rpmh-clk
 
   clocks:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
index 2dfc2a4f1918..c7fe6400ea13 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
@@ -15,6 +15,9 @@ description: |
 
   See also:: include/dt-bindings/clock/qcom,camcc-sc7180.h
 
+allOf:
+  - $ref: qcom,gcc.yaml#
+
 properties:
   compatible:
     const: qcom,sc7180-camcc
@@ -31,28 +34,15 @@ properties:
       - const: iface
       - const: xo
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
   reg:
     maxItems: 1
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
index 01feef1cab0a..dcef8de3a905 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
@@ -15,6 +15,9 @@ description: |
 
   See also:: include/dt-bindings/clock/qcom,camcc-sc7280.h
 
+allOf:
+  - $ref: qcom,gcc.yaml#
+
 properties:
   compatible:
     const: qcom,sc7280-camcc
@@ -31,28 +34,15 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
   reg:
     maxItems: 1
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
index 91d1f7918037..810b852ae371 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
@@ -15,6 +15,9 @@ description: |
 
   See also:: include/dt-bindings/clock/qcom,camcc-sm845.h
 
+allOf:
+  - $ref: qcom,gcc.yaml#
+
 properties:
   compatible:
     const: qcom,sdm845-camcc
@@ -27,28 +30,15 @@ properties:
     items:
       - const: bi_tcxo
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
   reg:
     maxItems: 1
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
index dc3c18e4ead7..48986460f994 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
@@ -16,10 +16,15 @@ description: |
   See also::
     include/dt-bindings/clock/qcom,sm8450-camcc.h
     include/dt-bindings/clock/qcom,sm8550-camcc.h
+    include/dt-bindings/clock/qcom,sc8280xp-camcc.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
     enum:
+      - qcom,sc8280xp-camcc
       - qcom,sm8450-camcc
       - qcom,sm8550-camcc
 
@@ -40,29 +45,16 @@ properties:
     description:
       A phandle to an OPP node describing required MMCX performance point.
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
   reg:
     maxItems: 1
 
 required:
   - compatible
-  - reg
   - clocks
   - power-domains
   - required-opps
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
index 2320be920a5f..1a384e8532a5 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
@@ -17,12 +17,14 @@ description: |
     include/dt-bindings/clock/qcom,sm8450-gpucc.h
     include/dt-bindings/clock/qcom,sm8550-gpucc.h
     include/dt-bindings/reset/qcom,sm8450-gpucc.h
+    include/dt-bindings/reset/qcom,sm8650-gpucc.h
 
 properties:
   compatible:
     enum:
       - qcom,sm8450-gpucc
       - qcom,sm8550-gpucc
+      - qcom,sm8650-gpucc
 
   clocks:
     items:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml
index 1bf1a41fd89c..af16b05eac96 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml
@@ -13,12 +13,16 @@ description: |
   Qualcomm TCSR clock control module provides the clocks, resets and
   power domains on SM8550
 
-  See also:: include/dt-bindings/clock/qcom,sm8550-tcsr.h
+  See also:
+  - include/dt-bindings/clock/qcom,sm8550-tcsr.h
+  - include/dt-bindings/clock/qcom,sm8650-tcsr.h
 
 properties:
   compatible:
     items:
-      - const: qcom,sm8550-tcsr
+      - enum:
+          - qcom,sm8550-tcsr
+          - qcom,sm8650-tcsr
       - const: syscon
 
   clocks:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml
new file mode 100644
index 000000000000..5e0c45c380f5
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8650-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8650
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8650.
+
+  See also:: include/dt-bindings/clock/qcom,sm8650-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8650-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Display's AHB clock
+      - description: sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+      - description: Link clock from DP PHY1
+      - description: VCO DIV clock from DP PHY1
+      - description: Link clock from DP PHY2
+      - description: VCO DIV clock from DP PHY2
+      - description: Link clock from DP PHY3
+      - description: VCO DIV clock from DP PHY3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8650-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8650-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp0_phy 0>,
+               <&dp0_phy 1>,
+               <&dp1_phy 0>,
+               <&dp1_phy 1>,
+               <&dp2_phy 0>,
+               <&dp2_phy 1>,
+               <&dp3_phy 0>,
+               <&dp3_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml
new file mode 100644
index 000000000000..b54761cc8674
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8650-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8650
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8650
+
+  See also:: include/dt-bindings/clock/qcom,sm8650-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8650-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 1 Pipe clock source
+      - description: PCIE 1 Phy Auxiliary clock source
+      - description: UFS Phy Rx symbol 0 clock source
+      - description: UFS Phy Rx symbol 1 clock source
+      - description: UFS Phy Tx symbol 0 clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm8650-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>,
+               <&pcie0_phy>,
+               <&pcie1_phy>,
+               <&pcie_1_phy_aux_clk>,
+               <&ufs_mem_phy 0>,
+               <&ufs_mem_phy 1>,
+               <&ufs_mem_phy 2>,
+               <&usb_1_qmpphy>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml
new file mode 100644
index 000000000000..14a796dbf8bc
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,x1e80100-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on X1E80100
+
+maintainers:
+  - Rajendra Nayak <quic_rjendra@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on X1E80100
+
+  See also:: include/dt-bindings/clock/qcom,x1e80100-gcc.h
+
+properties:
+  compatible:
+    const: qcom,x1e80100-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIe 3 pipe clock
+      - description: PCIe 4 pipe clock
+      - description: PCIe 5 pipe clock
+      - description: PCIe 6a pipe clock
+      - description: PCIe 6b pipe clock
+      - description: USB QMP Phy 0 clock source
+      - description: USB QMP Phy 1 clock source
+      - description: USB QMP Phy 2 clock source
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the CX power domain.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@100000 {
+      compatible = "qcom,x1e80100-gcc";
+      reg = <0x00100000 0x200000>;
+      clocks = <&bi_tcxo_div2>,
+               <&sleep_clk>,
+               <&pcie3_phy>,
+               <&pcie4_phy>,
+               <&pcie5_phy>,
+               <&pcie6a_phy>,
+               <&pcie6b_phy>,
+               <&usb_1_ss0_qmpphy 0>,
+               <&usb_1_ss1_qmpphy 1>,
+               <&usb_1_ss2_qmpphy 2>;
+      power-domains = <&rpmhpd RPMHPD_CX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/renesas,9series.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/renesas,9series.yaml
index 3afdebdb52ad..af6319697b1c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/renesas,9series.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/renesas,9series.yaml
@@ -21,6 +21,15 @@ description: |
     1 -- DIF1
     2 -- DIF2
     3 -- DIF3
+  - 9FGV0841:
+    0 -- DIF0
+    1 -- DIF1
+    2 -- DIF2
+    3 -- DIF3
+    4 -- DIF4
+    5 -- DIF5
+    6 -- DIF6
+    7 -- DIF7
 
 maintainers:
   - Marek Vasut <marex@denx.de>
@@ -30,6 +39,7 @@ properties:
     enum:
       - renesas,9fgv0241
       - renesas,9fgv0441
+      - renesas,9fgv0841
 
   reg:
     description: I2C device address
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/silabs,si5351.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/silabs,si5351.txt
deleted file mode 100644
index bfda6af76bee..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/silabs,si5351.txt
+++ /dev/null
@@ -1,126 +0,0 @@
-Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
-
-Reference
-[1] Si5351A/B/C Data Sheet
-    https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
-
-The Si5351a/b/c are programmable i2c clock generators with up to 8 output
-clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
-3 output clocks are accessible. The internal structure of the clock
-generators can be found in [1].
-
-==I2C device node==
-
-Required properties:
-- compatible: shall be one of the following:
-	"silabs,si5351a" - Si5351a, QFN20 package
-	"silabs,si5351a-msop" - Si5351a, MSOP10 package
-	"silabs,si5351b" - Si5351b, QFN20 package
-	"silabs,si5351c" - Si5351c, QFN20 package
-- reg: i2c device address, shall be 0x60 or 0x61.
-- #clock-cells: from common clock binding; shall be set to 1.
-- clocks: from common clock binding; list of parent clock
-  handles, shall be xtal reference clock or xtal and clkin for
-  si5351c only. Corresponding clock input names are "xtal" and
-  "clkin" respectively.
-- #address-cells: shall be set to 1.
-- #size-cells: shall be set to 0.
-
-Optional properties:
-- silabs,pll-source: pair of (number, source) for each pll. Allows
-  to overwrite clock source of pll A (number=0) or B (number=1).
-
-==Child nodes==
-
-Each of the clock outputs can be overwritten individually by
-using a child node to the I2C device node. If a child node for a clock
-output is not set, the eeprom configuration is not overwritten.
-
-Required child node properties:
-- reg: number of clock output.
-
-Optional child node properties:
-- silabs,clock-source: source clock of the output divider stage N, shall be
-  0 = multisynth N
-  1 = multisynth 0 for output clocks 0-3, else multisynth4
-  2 = xtal
-  3 = clkin (si5351c only)
-- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
-- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
-  divider.
-- silabs,pll-master: boolean, multisynth can change pll frequency.
-- silabs,pll-reset: boolean, clock output can reset its pll.
-- silabs,disable-state : clock output disable state, shall be
-  0 = clock output is driven LOW when disabled
-  1 = clock output is driven HIGH when disabled
-  2 = clock output is FLOATING (HIGH-Z) when disabled
-  3 = clock output is NEVER disabled
-
-==Example==
-
-/* 25MHz reference crystal */
-ref25: ref25M {
-	compatible = "fixed-clock";
-	#clock-cells = <0>;
-	clock-frequency = <25000000>;
-};
-
-i2c-master-node {
-
-	/* Si5351a msop10 i2c clock generator */
-	si5351a: clock-generator@60 {
-		compatible = "silabs,si5351a-msop";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#clock-cells = <1>;
-
-		/* connect xtal input to 25MHz reference */
-		clocks = <&ref25>;
-		clock-names = "xtal";
-
-		/* connect xtal input as source of pll0 and pll1 */
-		silabs,pll-source = <0 0>, <1 0>;
-
-		/*
-		 * overwrite clkout0 configuration with:
-		 * - 8mA output drive strength
-		 * - pll0 as clock source of multisynth0
-		 * - multisynth0 as clock source of output divider
-		 * - multisynth0 can change pll0
-		 * - set initial clock frequency of 74.25MHz
-		 */
-		clkout0 {
-			reg = <0>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <0>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-			clock-frequency = <74250000>;
-		};
-
-		/*
-		 * overwrite clkout1 configuration with:
-		 * - 4mA output drive strength
-		 * - pll1 as clock source of multisynth1
-		 * - multisynth1 as clock source of output divider
-		 * - multisynth1 can change pll1
-		 */
-		clkout1 {
-			reg = <1>;
-			silabs,drive-strength = <4>;
-			silabs,multisynth-source = <1>;
-			silabs,clock-source = <0>;
-			pll-master;
-		};
-
-		/*
-		 * overwrite clkout2 configuration with:
-		 * - xtal as clock source of output divider
-		 */
-		clkout2 {
-			reg = <2>;
-			silabs,clock-source = <2>;
-		};
-	};
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/silabs,si5351.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/silabs,si5351.yaml
new file mode 100644
index 000000000000..d3e0ec29993b
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/silabs,si5351.yaml
@@ -0,0 +1,265 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/silabs,si5351.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs Si5351A/B/C programmable I2C clock generators
+
+description: |
+  The Silicon Labs Si5351A/B/C are programmable I2C clock generators with up to
+  8 outputs. Si5351A also has a reduced pin-count package (10-MSOP) where only 3
+  output clocks are accessible. The internal structure of the clock generators
+  can be found in [1].
+
+  [1] Si5351A/B/C Data Sheet
+      https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
+
+maintainers:
+  - Alvin Šipraga <alsi@bang-olufsen.dk>
+
+properties:
+  compatible:
+    enum:
+      - silabs,si5351a      # Si5351A, 20-QFN package
+      - silabs,si5351a-msop # Si5351A, 10-MSOP package
+      - silabs,si5351b      # Si5351B, 20-QFN package
+      - silabs,si5351c      # Si5351C, 20-QFN package
+
+  reg:
+    enum:
+      - 0x60
+      - 0x61
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xtal
+      - const: clkin
+
+  silabs,pll-source:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      A list of cell pairs containing a PLL index and its source. Allows to
+      overwrite clock source of the internal PLLs.
+    items:
+      items:
+        - description: PLL A (0) or PLL B (1)
+          enum: [ 0, 1 ]
+        - description: PLL source, XTAL (0) or CLKIN (1, Si5351C only).
+          enum: [ 0, 1 ]
+
+  silabs,pll-reset-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 2
+    description: A list of cell pairs containing a PLL index and its reset mode.
+    items:
+      items:
+        - description: PLL A (0) or PLL B (1)
+          enum: [ 0, 1 ]
+        - description: |
+            Reset mode for the PLL. Mode can be one of:
+
+                0 - reset whenever PLL rate is adjusted (default mode)
+                1 - do not reset when PLL rate is adjusted
+
+            In mode 1, the PLL is only reset if the silabs,pll-reset is
+            specified in one of the clock output child nodes that also sources
+            the PLL. This mode may be preferable if output clocks are expected
+            to be adjusted without glitches.
+          enum: [ 0, 1 ]
+
+patternProperties:
+  "^clkout@[0-7]$":
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: Clock output number.
+
+      clock-frequency: true
+
+      silabs,clock-source:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Source clock of the this output's divider stage.
+
+          0 - use multisynth N for this output, where N is the output number
+          1 - use either multisynth 0 (if output number is 0-3) or multisynth 4
+              (otherwise) for this output
+          2 - use XTAL for this output
+          3 - use CLKIN for this output (Si5351C only)
+
+      silabs,drive-strength:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 2, 4, 6, 8 ]
+        description: Output drive strength in mA.
+
+      silabs,multisynth-source:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1 ]
+        description:
+          Source PLL A (0) or B (1) for the corresponding multisynth divider.
+
+      silabs,pll-master:
+        type: boolean
+        description: |
+          The frequency of the source PLL is allowed to be changed by the
+          multisynth when setting the rate of this clock output.
+
+      silabs,pll-reset:
+        type: boolean
+        description: Reset the source PLL when enabling this clock output.
+
+      silabs,disable-state:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1, 2, 3 ]
+        description: |
+          Clock output disable state. The state can be one of:
+
+          0 - clock output is driven LOW when disabled
+          1 - clock output is driven HIGH when disabled
+          2 - clock output is FLOATING (HIGH-Z) when disabled
+          3 - clock output is never disabled
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: silabs,si5351a-msop
+        then:
+          properties:
+            reg:
+              maximum: 2
+        else:
+          properties:
+            reg:
+              maximum: 7
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: silabs,si5351c
+        then:
+          properties:
+            silabs,clock-source:
+              enum: [ 0, 1, 2, 3 ]
+        else:
+          properties:
+            silabs,clock-source:
+              enum: [ 0, 1, 2 ]
+
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - silabs,si5351a
+              - silabs,si5351a-msop
+              - silabs,si5351b
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-generator@60 {
+        compatible = "silabs,si5351a-msop";
+        reg = <0x60>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #clock-cells = <1>;
+
+        /* Connect XTAL input to 25MHz reference */
+        clocks = <&ref25>;
+        clock-names = "xtal";
+
+        /* Use XTAL input as source of PLL0 and PLL1 */
+        silabs,pll-source = <0 0>, <1 0>;
+
+        /* Don't reset PLL1 on rate adjustment */
+        silabs,pll-reset-mode = <1 1>;
+
+        /*
+         * Overwrite CLK0 configuration with:
+         * - 8 mA output drive strength
+         * - PLL0 as clock source of multisynth 0
+         * - Multisynth 0 as clock source of output divider
+         * - Multisynth 0 can change PLL0
+         * - Set initial clock frequency of 74.25MHz
+         */
+        clkout@0 {
+          reg = <0>;
+          silabs,drive-strength = <8>;
+          silabs,multisynth-source = <0>;
+          silabs,clock-source = <0>;
+          silabs,pll-master;
+          clock-frequency = <74250000>;
+        };
+
+        /*
+         * Overwrite CLK1 configuration with:
+         * - 4 mA output drive strength
+         * - PLL1 as clock source of multisynth 1
+         * - Multisynth 1 as clock source of output divider
+         * - Multisynth 1 can change PLL1
+         * - Reset PLL1 when enabling this clock output
+         */
+        clkout@1 {
+          reg = <1>;
+          silabs,drive-strength = <4>;
+          silabs,multisynth-source = <1>;
+          silabs,clock-source = <0>;
+          silabs,pll-master;
+          silabs,pll-reset;
+        };
+
+        /*
+         * Overwrite CLK2 configuration with:
+         * - XTAL as clock source of output divider
+         */
+        clkout@2 {
+          reg = <2>;
+          silabs,clock-source = <2>;
+        };
+      };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml
new file mode 100644
index 000000000000..c1dc24673c0d
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,cv1800-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800 Series Clock Controller
+
+maintainers:
+  - Inochi Amaoto <inochiama@outlook.com>
+
+properties:
+  compatible:
+    enum:
+      - sophgo,cv1800-clk
+      - sophgo,cv1810-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description:
+      See <dt-bindings/clock/sophgo,cv1800.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@3002000 {
+        compatible = "sophgo,cv1800-clk";
+        reg = <0x03002000 0x1000>;
+        clocks = <&osc>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml
new file mode 100644
index 000000000000..7732e79a42b9
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/st,stm32mp25-rcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP25 Reset Clock Controller
+
+maintainers:
+  - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
+
+description: |
+  The RCC hardware block is both a reset and a clock controller.
+  RCC makes also power management (resume/supend).
+
+  See also::
+    include/dt-bindings/clock/st,stm32mp25-rcc.h
+    include/dt-bindings/reset/st,stm32mp25-rcc.h
+
+properties:
+  compatible:
+    enum:
+      - st,stm32mp25-rcc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: CK_SCMI_HSE High Speed External oscillator (8 to 48 MHz)
+      - description: CK_SCMI_HSI High Speed Internal oscillator (~ 64 MHz)
+      - description: CK_SCMI_MSI Low Power Internal oscillator (~ 4 MHz or ~ 16 MHz)
+      - description: CK_SCMI_LSE Low Speed External oscillator (32 KHz)
+      - description: CK_SCMI_LSI Low Speed Internal oscillator (~ 32 KHz)
+
+  clock-names:
+    items:
+      - const: hse
+      - const: hsi
+      - const: msi
+      - const: lse
+      - const: lsi
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+
+    rcc: clock-controller@44200000 {
+        compatible = "st,stm32mp25-rcc";
+        reg = <0x44200000 0x10000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        clock-names = "hse", "hsi", "msi", "lse", "lsi";
+        clocks = <&scmi_clk CK_SCMI_HSE>,
+                 <&scmi_clk CK_SCMI_HSI>,
+                 <&scmi_clk CK_SCMI_MSI>,
+                 <&scmi_clk CK_SCMI_LSE>,
+                 <&scmi_clk CK_SCMI_LSI>;
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
index 02bd556bd91a..9d5324dc1027 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
@@ -20,6 +20,7 @@ properties:
       - xlnx,clocking-wizard
       - xlnx,clocking-wizard-v5.2
       - xlnx,clocking-wizard-v6.0
+      - xlnx,versal-clk-wizard
 
 
   reg:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
index 1ba687d433b1..bef109d163a8 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
@@ -31,11 +31,11 @@ properties:
   clocks:
     description: List of clock specifiers which are external input
       clocks to the given clock controller.
-    minItems: 3
+    minItems: 2
     maxItems: 8
 
   clock-names:
-    minItems: 3
+    minItems: 2
     maxItems: 8
 
 required:
@@ -59,15 +59,34 @@ allOf:
         clocks:
           items:
             - description: reference clock
-            - description: alternate reference clock
             - description: alternate reference clock for programmable logic
 
         clock-names:
           items:
             - const: ref
-            - const: alt_ref
             - const: pl_alt_ref
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,versal-net-clk
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: reference clock
+            - description: alternate reference clock for programmable logic
+            - description: alternate reference clock
+
+        clock-names:
+          items:
+            - const: ref
+            - const: pl_alt_ref
+            - const: alt_ref
+
   - if:
       properties:
         compatible:
@@ -110,8 +129,8 @@ examples:
         versal_clk: clock-controller {
           #clock-cells = <1>;
           compatible = "xlnx,versal-clk";
-          clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
-          clock-names = "ref", "alt_ref", "pl_alt_ref";
+          clocks = <&ref>,  <&pl_alt_ref>;
+          clock-names = "ref", "pl_alt_ref";
         };
       };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7c8a3e8430d3..fb216ce68bb3 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -66,7 +66,6 @@ properties:
       Particularly, if use an output GPIO to control a VBUS regulator, should
       model it as a regulator. See bindings/regulator/fixed-regulator.yaml
 
-  # The following are optional properties for "usb-c-connector".
   power-role:
     description: Determines the power role that the Type C connector will
       support. "dual" refers to Dual Role Port (DRP).
@@ -119,30 +118,6 @@ properties:
 
   # The following are optional properties for "usb-c-connector" with power
   # delivery support.
-  source-pdos:
-    description: An array of u32 with each entry providing supported power
-      source data object(PDO), the detailed bit definitions of PDO can be found
-      in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
-      Source_Capabilities Message, the order of each entry(PDO) should follow
-      the PD spec chapter 6.4.1. Required for power source and power dual role.
-      User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
-      defined in dt-bindings/usb/pd.h.
-    minItems: 1
-    maxItems: 7
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-
-  sink-pdos:
-    description: An array of u32 with each entry providing supported power sink
-      data object(PDO), the detailed bit definitions of PDO can be found in
-      "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
-      Sink Capabilities Message, the order of each entry(PDO) should follow the
-      PD spec chapter 6.4.1. Required for power sink and power dual role. User
-      can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
-      in dt-bindings/usb/pd.h.
-    minItems: 1
-    maxItems: 7
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-
   sink-vdos:
     description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),
       providing additional information corresponding to the product, the detailed bit
@@ -166,10 +141,43 @@ properties:
     maxItems: 6
     $ref: /schemas/types.yaml#/definitions/uint32-array
 
-  op-sink-microwatt:
-    description: Sink required operating power in microwatt, if source can't
-      offer the power, Capability Mismatch is set. Required for power sink and
-      power dual role.
+  accessory-mode-audio:
+    type: boolean
+    description: Whether the device supports Audio Adapter Accessory Mode. This
+      is only necessary if there are no other means to discover supported
+      alternative modes (e.g. through the UCSI firmware interface).
+
+  accessory-mode-debug:
+    type: boolean
+    description: Whether the device supports Debug Accessory Mode. This
+      is only necessary if there are no other means to discover supported
+      alternative modes (e.g. through the UCSI firmware interface).
+
+  altmodes:
+    type: object
+    description: List of Alternative Modes supported by the schematics on the
+      particular device. This is only necessary if there are no other means to
+      discover supported alternative modes (e.g. through the UCSI firmware
+      interface).
+
+    additionalProperties: false
+
+    patternProperties:
+      "^(displayport)$":
+        type: object
+        description:
+          A single USB-C Alternative Mode as supported by the USB-C connector logic.
+
+        additionalProperties: false
+
+        properties:
+          svid:
+            $ref: /schemas/types.yaml#/definitions/uint16
+            description: Unique value assigned by USB-IF to the Vendor / AltMode.
+            enum: [ 0xff01 ]
+          vdo:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: VDO returned by Discover Modes USB PD command.
 
   port:
     $ref: /schemas/graph.yaml#/properties/port
@@ -231,6 +239,20 @@ properties:
       SNK_READY for non-pd link.
     type: boolean
 
+  capabilities:
+    description: A child node to contain all the selectable USB Power Delivery capabilities.
+    type: object
+
+    patternProperties:
+      "^caps-[0-9]+$":
+        description: Child nodes under "capabilities" node. Each node contains a selectable USB
+          Power Delivery capability.
+        type: object
+        $ref: "#/$defs/capabilities"
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 dependencies:
   sink-vdos-v1: [ sink-vdos ]
   sink-vdos: [ sink-vdos-v1 ]
@@ -238,7 +260,42 @@ dependencies:
 required:
   - compatible
 
+$defs:
+  capabilities:
+    type: object
+
+    properties:
+      source-pdos:
+        description: An array of u32 with each entry providing supported power
+          source data object(PDO), the detailed bit definitions of PDO can be found
+          in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
+          Source_Capabilities Message, the order of each entry(PDO) should follow
+          the PD spec chapter 6.4.1. Required for power source and power dual role.
+          User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
+          defined in dt-bindings/usb/pd.h.
+        minItems: 1
+        maxItems: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      sink-pdos:
+        description: An array of u32 with each entry providing supported power sink
+          data object(PDO), the detailed bit definitions of PDO can be found in
+          "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
+          Sink Capabilities Message, the order of each entry(PDO) should follow the
+          PD spec chapter 6.4.1. Required for power sink and power dual role. User
+          can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
+          in dt-bindings/usb/pd.h.
+        minItems: 1
+        maxItems: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      op-sink-microwatt:
+        description: Sink required operating power in microwatt, if source can't
+          offer the power, Capability Mismatch is set. Required for power sink and
+          power dual role.
+
 allOf:
+  - $ref: "#/$defs/capabilities"
   - if:
       properties:
         compatible:
@@ -267,7 +324,7 @@ anyOf:
         - typec-power-opmode
         - new-source-frs-typec-current
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
@@ -289,6 +346,13 @@ examples:
             compatible = "usb-c-connector";
             label = "USB-C";
 
+            altmodes {
+                displayport {
+                    svid = /bits/ 16 <0xff01>;
+                    vdo = <0x00001c46>;
+                };
+            };
+
             ports {
                 #address-cells = <1>;
                 #size-cells = <0>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/cpu/idle-states.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/cpu/idle-states.yaml
index b3a5356f9916..239480ef7c30 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/cpu/idle-states.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/cpu/idle-states.yaml
@@ -243,7 +243,64 @@ description: |+
   just supports idle_standby, an idle-states node is not required.
 
   ===========================================
-  6 - References
+  6 - Qualcomm specific STATES
+  ===========================================
+
+  Idle states have different enter/exit latency and residency values.
+  The idle states supported by the QCOM SoC are defined as -
+
+    * Standby
+    * Retention
+    * Standalone Power Collapse (Standalone PC or SPC)
+    * Power Collapse (PC)
+
+  Standby: Standby does a little more in addition to architectural clock gating.
+  When the WFI instruction is executed the ARM core would gate its internal
+  clocks. In addition to gating the clocks, QCOM cpus use this instruction as a
+  trigger to execute the SPM state machine. The SPM state machine waits for the
+  interrupt to trigger the core back in to active. This triggers the cache
+  hierarchy to enter standby states, when all cpus are idle. An interrupt brings
+  the SPM state machine out of its wait, the next step is to ensure that the
+  cache hierarchy is also out of standby, and then the cpu is allowed to resume
+  execution. This state is defined as a generic ARM WFI state by the ARM cpuidle
+  driver and is not defined in the DT. The SPM state machine should be
+  configured to execute this state by default and after executing every other
+  state below.
+
+  Retention: Retention is a low power state where the core is clock gated and
+  the memory and the registers associated with the core are retained. The
+  voltage may be reduced to the minimum value needed to keep the processor
+  registers active. The SPM should be configured to execute the retention
+  sequence and would wait for interrupt, before restoring the cpu to execution
+  state. Retention may have a slightly higher latency than Standby.
+
+  Standalone PC: A cpu can power down and warmboot if there is a sufficient time
+  between the time it enters idle and the next known wake up. SPC mode is used
+  to indicate a core entering a power down state without consulting any other
+  cpu or the system resources. This helps save power only on that core.  The SPM
+  sequence for this idle state is programmed to power down the supply to the
+  core, wait for the interrupt, restore power to the core, and ensure the
+  system state including cache hierarchy is ready before allowing core to
+  resume. Applying power and resetting the core causes the core to warmboot
+  back into Elevation Level (EL) which trampolines the control back to the
+  kernel. Entering a power down state for the cpu, needs to be done by trapping
+  into a EL. Failing to do so, would result in a crash enforced by the warm boot
+  code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to
+  be flushed in s/w, before powering down the core.
+
+  Power Collapse: This state is similar to the SPC mode, but distinguishes
+  itself in that the cpu acknowledges and permits the SoC to enter deeper sleep
+  modes. In a hierarchical power domain SoC, this means L2 and other caches can
+  be flushed, system bus, clocks - lowered, and SoC main XO clock gated and
+  voltages reduced, provided all cpus enter this state.  Since the span of low
+  power modes possible at this state is vast, the exit latency and the residency
+  of this low power mode would be considered high even though at a cpu level,
+  this essentially is cpu power down. The SPM in this state also may handshake
+  with the Resource power manager (RPM) processor in the SoC to indicate a
+  complete application processor subsystem shut down.
+
+  ===========================================
+  7 - References
   ===========================================
 
   [1] ARM Linux Kernel documentation - CPUs bindings
@@ -301,9 +358,16 @@ patternProperties:
 
     properties:
       compatible:
-        enum:
-          - arm,idle-state
-          - riscv,idle-state
+        oneOf:
+          - items:
+              - enum:
+                  - qcom,idle-state-ret
+                  - qcom,idle-state-spc
+                  - qcom,idle-state-pc
+              - const: arm,idle-state
+          - enum:
+              - arm,idle-state
+              - riscv,idle-state
 
       arm,psci-suspend-param:
         $ref: /schemas/types.yaml#/definitions/uint32
@@ -852,4 +916,13 @@ examples:
         };
     };
 
+    // Example 4 - Qualcomm SPC
+    idle-states {
+      cpu_spc: cpu-spc {
+        compatible = "qcom,idle-state-spc", "arm,idle-state";
+        entry-latency-us = <150>;
+        exit-latency-us = <200>;
+        min-residency-us = <2000>;
+      };
+    };
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/crypto/inside-secure,safexcel.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/inside-secure,safexcel.yaml
new file mode 100644
index 000000000000..ef07258d16c1
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/inside-secure,safexcel.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Inside Secure SafeXcel cryptographic engine
+
+maintainers:
+  - Antoine Tenart <atenart@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: inside-secure,safexcel-eip197b
+      - const: inside-secure,safexcel-eip197d
+      - const: inside-secure,safexcel-eip97ies
+      - const: inside-secure,safexcel-eip197
+        description: Equivalent of inside-secure,safexcel-eip197b
+        deprecated: true
+      - const: inside-secure,safexcel-eip97
+        description: Equivalent of inside-secure,safexcel-eip97ies
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 6
+
+  interrupt-names:
+    items:
+      - const: ring0
+      - const: ring1
+      - const: ring2
+      - const: ring3
+      - const: eip
+      - const: mem
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: reg
+
+required:
+  - reg
+  - interrupts
+  - interrupt-names
+
+allOf:
+  - if:
+      properties:
+        clocks:
+          minItems: 2
+    then:
+      properties:
+        clock-names:
+          minItems: 2
+      required:
+        - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    crypto@800000 {
+        compatible = "inside-secure,safexcel-eip197b";
+        reg = <0x800000 0x200000>;
+        interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "ring0", "ring1", "ring2", "ring3", "eip", "mem";
+        clocks = <&cpm_syscon0 1 26>;
+        clock-names = "core";
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
deleted file mode 100644
index 3bbf144c9988..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Inside Secure SafeXcel cryptographic engine
-
-Required properties:
-- compatible: Should be "inside-secure,safexcel-eip197b",
-	      "inside-secure,safexcel-eip197d" or
-              "inside-secure,safexcel-eip97ies".
-- reg: Base physical address of the engine and length of memory mapped region.
-- interrupts: Interrupt numbers for the rings and engine.
-- interrupt-names: Should be "ring0", "ring1", "ring2", "ring3", "eip", "mem".
-
-Optional properties:
-- clocks: Reference to the crypto engine clocks, the second clock is
-          needed for the Armada 7K/8K SoCs.
-- clock-names: mandatory if there is a second clock, in this case the
-               name must be "core" for the first clock and "reg" for
-               the second one.
-
-Backward compatibility:
-Two compatibles are kept for backward compatibility, but shouldn't be used for
-new submissions:
-- "inside-secure,safexcel-eip197" is equivalent to
-  "inside-secure,safexcel-eip197b".
-- "inside-secure,safexcel-eip97" is equivalent to
-  "inside-secure,safexcel-eip97ies".
-
-Example:
-
-	crypto: crypto@800000 {
-		compatible = "inside-secure,safexcel-eip197b";
-		reg = <0x800000 0x200000>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3",
-				  "eip";
-		clocks = <&cpm_syscon0 1 26>;
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
index ca4f7d1cefaa..09e43157cc71 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -16,6 +16,7 @@ properties:
           - qcom,sa8775p-inline-crypto-engine
           - qcom,sm8450-inline-crypto-engine
           - qcom,sm8550-inline-crypto-engine
+          - qcom,sm8650-inline-crypto-engine
       - const: qcom,inline-crypto-engine
 
   reg:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/crypto/qcom,prng.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/qcom,prng.yaml
index 13070db0f70c..89c88004b41b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/crypto/qcom,prng.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/qcom,prng.yaml
@@ -21,6 +21,7 @@ properties:
               - qcom,sc7280-trng
               - qcom,sm8450-trng
               - qcom,sm8550-trng
+              - qcom,sm8650-trng
           - const: qcom,trng
 
   reg:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/crypto/qcom-qce.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
index 8e665d910e6e..a48bd381063a 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
@@ -44,10 +44,12 @@ properties:
 
       - items:
           - enum:
+              - qcom,sc7280-qce
               - qcom,sm8250-qce
               - qcom,sm8350-qce
               - qcom,sm8450-qce
               - qcom,sm8550-qce
+              - qcom,sm8650-qce
           - const: qcom,sm8150-qce
           - const: qcom,qce
 
@@ -96,6 +98,7 @@ allOf:
               - qcom,crypto-v5.4
               - qcom,ipq6018-qce
               - qcom,ipq8074-qce
+              - qcom,ipq9574-qce
               - qcom,msm8996-qce
               - qcom,sdm845-qce
     then:
@@ -129,6 +132,17 @@ allOf:
         - clocks
         - clock-names
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8150-qce
+    then:
+      properties:
+        clocks: false
+        clock-names: false
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
index f201ae4af4fb..2cef25215798 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
@@ -55,6 +55,27 @@ properties:
       - port@0
       - port@1
 
+  vcchdmipll-supply:
+    description: A 1.8V supply that powers the HDMI PLL.
+
+  vcchdmitx-supply:
+    description: A 1.8V supply that powers the HDMI TX part.
+
+  vcclvdspll-supply:
+    description: A 1.8V supply that powers the LVDS PLL.
+
+  vcclvdstx-supply:
+    description: A 1.8V supply that powers the LVDS TX part.
+
+  vccmipirx-supply:
+    description: A 1.8V supply that powers the MIPI RX part.
+
+  vccsysclk-supply:
+    description: A 1.8V supply that powers the SYSCLK.
+
+  vdd-supply:
+    description: A 1.8V supply that powers the digital part.
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
index 21d995f29a1e..b8e9cf6ce4e6 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
@@ -29,19 +29,22 @@ properties:
 
   audio-ports:
     description:
-      Array of 8-bit values, 2 values per DAI (Documentation/sound/soc/dai.rst).
+      Array of 2 values per DAI (Documentation/sound/soc/dai.rst).
       The implementation allows one or two DAIs.
       If two DAIs are defined, they must be of different type.
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 2
     items:
-      minItems: 1
       items:
         - description: |
             The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S
             (see include/dt-bindings/display/tda998x.h).
+          enum: [ 1, 2 ]
         - description:
             The second value defines the tda998x AP_ENA reg content when the
             DAI in question is used.
+          maximum: 0xff
 
   '#sound-dai-cells':
     enum: [ 0, 1 ]
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
index 7fd42c8fdc32..b4c28e96dd55 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -24,6 +24,7 @@ properties:
       - enum:
           - mediatek,mt8173-disp-aal
           - mediatek,mt8183-disp-aal
+          - mediatek,mt8195-mdp3-aal
       - items:
           - enum:
               - mediatek,mt2712-disp-aal
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
index f21e44092043..b886ca0d89ea 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
@@ -26,6 +26,7 @@ properties:
           - mediatek,mt2701-disp-color
           - mediatek,mt8167-disp-color
           - mediatek,mt8173-disp-color
+          - mediatek,mt8195-mdp3-color
       - items:
           - enum:
               - mediatek,mt7623-disp-color
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
index ed24b617090b..8611319bed2e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
@@ -34,6 +34,10 @@ properties:
           - enum:
               - mediatek,mt6795-dsi
           - const: mediatek,mt8173-dsi
+      - items:
+          - enum:
+              - mediatek,mt8195-dsi
+          - const: mediatek,mt8183-dsi
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
index 801fa66ae615..677882348ede 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
@@ -23,7 +23,11 @@ description:
 
 properties:
   compatible:
-    const: mediatek,mt8195-disp-ethdr
+    oneOf:
+      - const: mediatek,mt8195-disp-ethdr
+      - items:
+          - const: mediatek,mt8188-disp-ethdr
+          - const: mediatek,mt8195-disp-ethdr
 
   reg:
     maxItems: 7
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
deleted file mode 100644
index dd12e2ff685c..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
+++ /dev/null
@@ -1,88 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: MediaTek MDP RDMA
-
-maintainers:
-  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
-  - Philipp Zabel <p.zabel@pengutronix.de>
-
-description:
-  The MediaTek MDP RDMA stands for Read Direct Memory Access.
-  It provides real time data to the back-end panel driver, such as DSI,
-  DPI and DP_INTF.
-  It contains one line buffer to store the sufficient pixel data.
-  RDMA device node must be siblings to the central MMSYS_CONFIG node.
-  For a description of the MMSYS_CONFIG binding, see
-  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details.
-
-properties:
-  compatible:
-    const: mediatek,mt8195-vdo1-rdma
-
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
-  power-domains:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: RDMA Clock
-
-  iommus:
-    maxItems: 1
-
-  mediatek,gce-client-reg:
-    description:
-      The register of display function block to be set by gce. There are 4 arguments,
-      such as gce node, subsys id, offset and register size. The subsys id that is
-      mapping to the register of display function blocks is defined in the gce header
-      include/dt-bindings/gce/<chip>-gce.h of each chips.
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    items:
-      items:
-        - description: phandle of GCE
-        - description: GCE subsys id
-        - description: register offset
-        - description: register size
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - power-domains
-  - clocks
-  - iommus
-  - mediatek,gce-client-reg
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/clock/mt8195-clk.h>
-    #include <dt-bindings/power/mt8195-power.h>
-    #include <dt-bindings/gce/mt8195-gce.h>
-    #include <dt-bindings/memory/mt8195-memory-port.h>
-
-    soc {
-        #address-cells = <2>;
-        #size-cells = <2>;
-
-        rdma@1c104000 {
-            compatible = "mediatek,mt8195-vdo1-rdma";
-            reg = <0 0x1c104000 0 0x1000>;
-            interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
-            clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
-            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
-            iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
-            mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
-        };
-    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
index eead5cb8636e..dae839279950 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -24,9 +24,13 @@ properties:
       - enum:
           - mediatek,mt8173-disp-merge
           - mediatek,mt8195-disp-merge
+          - mediatek,mt8195-mdp3-merge
       - items:
           - const: mediatek,mt6795-disp-merge
           - const: mediatek,mt8173-disp-merge
+      - items:
+          - const: mediatek,mt8188-disp-merge
+          - const: mediatek,mt8195-disp-merge
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
index 3e1069b00b56..c471a181d125 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
@@ -26,6 +26,7 @@ properties:
           - mediatek,mt8173-disp-ovl
           - mediatek,mt8183-disp-ovl
           - mediatek,mt8192-disp-ovl
+          - mediatek,mt8195-mdp3-ovl
       - items:
           - enum:
               - mediatek,mt7623-disp-ovl
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
new file mode 100644
index 000000000000..be07bbdc54e3
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Padding
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  Padding provides ability to add pixels to width and height of a layer with
+  specified colors. Due to hardware design, Mixer in VDOSYS1 requires
+  width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
+  we need Padding to deal with odd width.
+  Please notice that even if the Padding is in bypass mode, settings in
+  register must be cleared to 0, or undefined behaviors could happen.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8188-disp-padding
+      - mediatek,mt8195-mdp3-padding
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Padding's clocks
+
+  mediatek,gce-client-reg:
+    description:
+      GCE (Global Command Engine) is a multi-core micro processor that helps
+      its clients to execute commands without interrupting CPU. This property
+      describes GCE client's information that is composed by 4 fields.
+      1. Phandle of the GCE (there may be several GCE processors)
+      2. Sub-system ID defined in the dt-binding like a user ID
+         (Please refer to include/dt-bindings/gce/<chip>-gce.h)
+      3. Offset from base address of the subsys you are at
+      4. Size of the register the client needs
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: Phandle of the GCE
+        - description: Subsys ID defined in the dt-binding
+        - description: Offset from base address of the subsys
+        - description: Size of register
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mediatek,mt8188-clk.h>
+    #include <dt-bindings/power/mediatek,mt8188-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        padding0: padding@1c11d000 {
+            compatible = "mediatek,mt8188-disp-padding";
+            reg = <0 0x1c11d000 0 0x1000>;
+            clocks = <&vdosys1 CLK_VDO1_PADDING0>;
+            power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+            mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
index a8a5c9608598..e4affc854f3d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
@@ -23,6 +23,7 @@ properties:
     oneOf:
       - enum:
           - mediatek,mt8173-disp-split
+          - mediatek,mt8195-mdp3-split
       - items:
           - const: mediatek,mt6795-disp-split
           - const: mediatek,mt8173-disp-split
@@ -38,6 +39,21 @@ properties:
       the power controller specified by phandle. See
       Documentation/devicetree/bindings/power/power-domain.yaml for details.
 
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
   clocks:
     items:
       - description: SPLIT Clock
@@ -48,6 +64,17 @@ required:
   - power-domains
   - clocks
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8195-mdp3-split
+
+    then:
+      required:
+        - mediatek,gce-client-reg
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/dp-controller.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index dbe398f84ffb..ae53cbfb2193 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -26,8 +26,10 @@ properties:
           - qcom,sc8280xp-edp
           - qcom,sdm845-dp
           - qcom,sm8350-dp
+          - qcom,sm8650-dp
       - items:
           - enum:
+              - qcom,sm8150-dp
               - qcom,sm8250-dp
               - qcom,sm8450-dp
               - qcom,sm8550-dp
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index c6dbab65d5f7..4219936eda5a 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -25,6 +25,7 @@ properties:
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
               - qcom,sdm660-dsi-ctrl
+              - qcom,sdm670-dsi-ctrl
               - qcom,sdm845-dsi-ctrl
               - qcom,sm6115-dsi-ctrl
               - qcom,sm6125-dsi-ctrl
@@ -35,6 +36,7 @@ properties:
               - qcom,sm8350-dsi-ctrl
               - qcom,sm8450-dsi-ctrl
               - qcom,sm8550-dsi-ctrl
+              - qcom,sm8650-dsi-ctrl
           - const: qcom,mdss-dsi-ctrl
       - enum:
           - qcom,dsi-ctrl-6g-qcm2290
@@ -333,6 +335,7 @@ allOf:
               - qcom,sm8350-dsi-ctrl
               - qcom,sm8450-dsi-ctrl
               - qcom,sm8550-dsi-ctrl
+              - qcom,sm8650-dsi-ctrl
     then:
       properties:
         clocks:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
index dd6619555a12..7e764eac3ef3 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
@@ -22,6 +22,7 @@ properties:
       - qcom,sm8350-dsi-phy-5nm
       - qcom,sm8450-dsi-phy-5nm
       - qcom,sm8550-dsi-phy-4nm
+      - qcom,sm8650-dsi-phy-4nm
 
   reg:
     items:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/mdss-common.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
index f69196e4cc76..c6305a6e0334 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
@@ -61,17 +61,27 @@ properties:
 
   ranges: true
 
+  # This is not a perfect description, but it's impossible to discern and match
+  # the entries like we do with interconnect-names
   interconnects:
     minItems: 1
     items:
       - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
       - description: Interconnect path from mdp1 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    minItems: 1
-    items:
-      - const: mdp0-mem
-      - const: mdp1-mem
+    oneOf:
+      - minItems: 1
+        items:
+          - const: mdp0-mem
+          - const: cpu-cfg
+
+      - minItems: 2
+        items:
+          - const: mdp0-mem
+          - const: mdp1-mem
+          - const: cpu-cfg
 
   resets:
     items:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
index 5ad155612b6c..f0cdb5422688 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
@@ -36,10 +36,14 @@ properties:
     maxItems: 2
 
   interconnects:
-    maxItems: 1
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 1
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
@@ -56,7 +60,9 @@ patternProperties:
 
     properties:
       compatible:
-        const: qcom,dsi-ctrl-6g-qcm2290
+        items:
+          - const: qcom,qcm2290-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
 
   "^phy@[0-9a-f]+$":
     type: object
@@ -96,8 +102,10 @@ examples:
         interrupt-controller;
         #interrupt-cells = <1>;
 
-        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
-        interconnect-names = "mdp0-mem";
+        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>,
+                        <&bimc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "cpu-cfg";
 
         iommus = <&apps_smmu 0x420 0x2>,
                  <&apps_smmu 0x421 0x0>;
@@ -136,7 +144,8 @@ examples:
         };
 
         dsi@5e94000 {
-            compatible = "qcom,dsi-ctrl-6g-qcm2290";
+            compatible = "qcom,qcm2290-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
             reg = <0x05e94000 0x400>;
             reg-names = "dsi_ctrl";
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
index 3432a2407caa..7a0555b15ddf 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
@@ -36,10 +36,14 @@ properties:
     maxItems: 1
 
   interconnects:
-    maxItems: 1
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 1
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
@@ -106,8 +110,10 @@ examples:
         interrupt-controller;
         #interrupt-cells = <1>;
 
-        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
-        interconnect-names = "mdp0-mem";
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+                        <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "cpu-cfg";
 
         iommus = <&apps_smmu 0x800 0x2>;
         ranges;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
index bbb727831fca..2947f27e0585 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
@@ -36,10 +36,14 @@ properties:
     maxItems: 1
 
   interconnects:
-    maxItems: 1
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 1
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
@@ -118,8 +122,10 @@ examples:
         interrupt-controller;
         #interrupt-cells = <1>;
 
-        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
-        interconnect-names = "mdp0-mem";
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+                        <&gem_noc MASTER_APPSS_PROC &cnoc2 SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "cpu-cfg";
 
         iommus = <&apps_smmu 0x900 0x402>;
         ranges;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
new file mode 100644
index 000000000000..7dc269322b8e
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
@@ -0,0 +1,292 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm670-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM670 Display MDSS
+
+maintainers:
+  - Richard Acayan <mailingradian@gmail.com>
+
+description:
+  SDM670 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm670-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sdm670-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sdm670-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sdm670-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,sdm670-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sdm670-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+                        <&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        iommus = <&apps_smmu 0x880 0x8>,
+                 <&apps_smmu 0xc80 0x8>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sdm670-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SDM670_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss_dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM670_CX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM670_CX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
index b917064bdf33..dc11fd421a27 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
@@ -13,7 +13,9 @@ $ref: /schemas/display/msm/dpu-common.yaml#
 
 properties:
   compatible:
-    const: qcom,sdm845-dpu
+    enum:
+      - qcom,sdm670-dpu
+      - qcom,sdm845-dpu
 
   reg:
     items:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
index dde5c2acead5..309de1953c88 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
@@ -29,6 +29,16 @@ properties:
   iommus:
     maxItems: 2
 
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
 patternProperties:
   "^display-controller@[0-9a-f]+$":
     type: object
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml
index 671c2c2aa896..3deb9dc81c9c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml
@@ -35,10 +35,14 @@ properties:
     maxItems: 1
 
   interconnects:
-    maxItems: 2
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 2
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
index e1dcb453762e..c9ba1fae8042 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
@@ -35,10 +35,14 @@ properties:
     maxItems: 1
 
   interconnects:
-    maxItems: 2
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 2
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
index b15c3950f09d..8e8a288d318c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
@@ -35,10 +35,14 @@ properties:
     maxItems: 1
 
   interconnects:
-    maxItems: 2
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 2
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
index a2a8be7f64a9..c0d6a4fdff97 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
@@ -69,7 +69,7 @@ patternProperties:
 
     properties:
       compatible:
-        const: qcom,dsi-phy-7nm
+        const: qcom,dsi-phy-7nm-8150
 
 unevaluatedProperties: false
 
@@ -247,7 +247,7 @@ examples:
         };
 
         dsi0_phy: phy@ae94400 {
-            compatible = "qcom,dsi-phy-7nm";
+            compatible = "qcom,dsi-phy-7nm-8150";
             reg = <0x0ae94400 0x200>,
                   <0x0ae94600 0x280>,
                   <0x0ae94900 0x260>;
@@ -318,7 +318,7 @@ examples:
         };
 
         dsi1_phy: phy@ae96400 {
-            compatible = "qcom,dsi-phy-7nm";
+            compatible = "qcom,dsi-phy-7nm-8150";
             reg = <0x0ae96400 0x200>,
                   <0x0ae96600 0x280>,
                   <0x0ae96900 0x260>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
index 994975909fea..51368cda7b2f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
@@ -52,6 +52,16 @@ patternProperties:
       compatible:
         const: qcom,sm8250-dpu
 
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8250-dp
+          - const: qcom,sm8350-dp
+
   "^dsi@[0-9a-f]+$":
     type: object
     additionalProperties: true
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
index 001b26e65301..747a2e9665f4 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
@@ -30,10 +30,10 @@ properties:
     maxItems: 1
 
   interconnects:
-    maxItems: 2
+    maxItems: 3
 
   interconnect-names:
-    maxItems: 2
+    maxItems: 3
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
@@ -91,9 +91,12 @@ examples:
         reg = <0x0ae00000 0x1000>;
         reg-names = "mdss";
 
-        interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
-                        <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>;
-        interconnect-names = "mdp0-mem", "mdp1-mem";
+        interconnects = <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>,
+                        <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>,
+                        <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "mdp1-mem",
+                             "cpu-cfg";
 
         resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
new file mode 100644
index 000000000000..a01d15a03317
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8650 Display DPU
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8650-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi
+      - description: Display MDSS ahb
+      - description: Display lut
+      - description: Display core
+      - description: Display vsync
+
+  clock-names:
+    items:
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8650-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc_axi_clk>,
+                 <&dispcc_ahb_clk>,
+                 <&dispcc_mdp_lut_clk>,
+                 <&dispcc_mdp_clk>,
+                 <&dispcc_vsync_clk>;
+        clock-names = "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc_vsync_clk>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf1_out: endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dpu_intf2_out: endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+
+        mdp_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                required-opps = <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-325000000 {
+                opp-hz = /bits/ 64 <325000000>;
+                required-opps = <&rpmhpd_opp_svs>;
+            };
+
+            opp-375000000 {
+                opp-hz = /bits/ 64 <375000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-514000000 {
+                opp-hz = /bits/ 64 <514000000>;
+                required-opps = <&rpmhpd_opp_nom>;
+            };
+        };
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml
new file mode 100644
index 000000000000..bd11119dc93d
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml
@@ -0,0 +1,328 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8650 Display MDSS
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8650-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8650-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8650-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8650-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8650-dsi-phy-4nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8650-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        resets = <&dispcc_core_bcr>;
+
+        power-domains = <&dispcc_gdsc>;
+
+        clocks = <&gcc_ahb_clk>,
+                 <&gcc_axi_clk>,
+                 <&dispcc_mdp_clk>;
+        clock-names = "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8650-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc_axi_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&dispcc_mdp_lut_clk>,
+                     <&dispcc_mdp_clk>,
+                     <&dispcc_mdp_vsync_clk>;
+            clock-names = "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_mdp_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sm8650-dsi-phy-4nm";
+            reg = <0x0ae95000 0x200>,
+                  <0x0ae95200 0x280>,
+                  <0x0ae95500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,sm8650-dsi-phy-4nm";
+            reg = <0x0ae97000 0x200>,
+                  <0x0ae97200 0x280>,
+                  <0x0ae97500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml
new file mode 100644
index 000000000000..d13c4bd26de4
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/fascontek,fs035vg158.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fascontek FS035VG158 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - John Watts <contact@jookia.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: fascontek,fs035vg158
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - reg
+  - port
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "fascontek,fs035vg158";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
index ffb35288ffbb..916bb7f94206 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
@@ -23,6 +23,7 @@ properties:
     items:
       - enum:
           - hannstar,hsd060bhw4
+          - powkiddy,x55-panel
       - const: himax,hx8394
 
   reg: true
@@ -31,6 +32,8 @@ properties:
 
   backlight: true
 
+  rotation: true
+
   port: true
 
   vcc-supply:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml
new file mode 100644
index 000000000000..f4f91f93f490
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9805 based MIPI-DSI panels
+
+maintainers:
+  - Michael Trimarchi <michael@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - giantplus,gpm1790a0
+          - tianma,tm041xdhg01
+      - const: ilitek,ili9805
+
+  avdd-supply: true
+  dvdd-supply: true
+  reg: true
+
+required:
+  - compatible
+  - avdd-supply
+  - dvdd-supply
+  - reg
+  - reset-gpios
+  - port
+  - backlight
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "giantplus,gpm1790a0", "ilitek,ili9805";
+            reg = <0>;
+            avdd-supply = <&avdd_display>;
+            dvdd-supply = <&dvdd_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
index e7ab6224b52e..b1e624be3e33 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
@@ -16,6 +16,7 @@ properties:
   compatible:
     items:
       - enum:
+          - ampire,am8001280g
           - bananapi,lhr050h41
           - feixin,k101-im2byl02
           - tdo,tl050hdv35
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
index ebdca5f5a001..7a55961e1a3d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
@@ -18,16 +18,12 @@ properties:
   compatible:
     const: leadtek,ltk035c5444t
 
-  backlight: true
-  port: true
-  power-supply: true
-  reg: true
-  reset-gpios: true
-
   spi-3wire: true
 
 required:
   - compatible
+  - reg
+  - port
   - power-supply
   - reset-gpios
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
index cce775a87f87..7a634fbc465e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
@@ -21,7 +21,7 @@ properties:
       - enum:
           - anbernic,rg351v-panel
           - anbernic,rg353p-panel
-          - anbernic,rg353v-panel
+          - powkiddy,rk2023-panel
       - const: newvision,nv3051d
 
   reg: true
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml
index a5a596ff8e75..716ece5f3978 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml
@@ -33,6 +33,8 @@ properties:
 
         # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
       - auo,g133han01
+        # AU Optronics Corporation 15.6" FHD (1920x1080) TFT LCD panel
+      - auo,g156han04
         # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
       - auo,g185han01
         # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 11422af3477e..634a10c6f2dd 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -73,6 +73,8 @@ properties:
       - auo,t215hvn01
         # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
       - avic,tm070ddh03
+        # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel
+      - boe,bp101wx1-100
         # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
       - boe,ev121wxm-n10-1850
         # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
@@ -144,6 +146,8 @@ properties:
       - edt,etmv570g2dhu
         # E Ink VB3300-KCA
       - eink,vb3300-kca
+        # Evervision Electronics Co. Ltd. VGG644804 5.7" VGA TFT LCD Panel
+      - evervision,vgg644804
         # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel
       - evervision,vgg804821
         # Foxlink Group 5" WVGA TFT LCD panel
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
index 4dc0cd4a6a77..b348f5bf0a98 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
@@ -27,6 +27,7 @@ properties:
   compatible:
     items:
       - enum:
+          - anbernic,rg-arc-panel
           - densitron,dmt028vghmcmi-1a
           - elida,kd50t048a
           - techstar,ts8550b
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml
new file mode 100644
index 000000000000..e5617d125567
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/synaptics,r63353.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics R63353 based MIPI-DSI panels
+
+maintainers:
+  - Michael Trimarchi <michael@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sharp,ls068b3sx02
+      - const: syna,r63353
+
+  avdd-supply: true
+  dvdd-supply: true
+  reg: true
+
+required:
+  - compatible
+  - avdd-supply
+  - dvdd-supply
+  - reg
+  - reset-gpios
+  - port
+  - backlight
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls068b3sx02", "syna,r63353";
+            reg = <0>;
+            avdd-supply = <&avdd_display>;
+            dvdd-supply = <&dvdd_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
deleted file mode 100644
index cec21714f0e0..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Rockchip specific extensions to the Innosilicon HDMI
-================================
-
-Required properties:
-- compatible:
-	"rockchip,rk3036-inno-hdmi";
-- reg:
-	Physical base address and length of the controller's registers.
-- clocks, clock-names:
-	Phandle to hdmi controller clock, name should be "pclk"
-- interrupts:
-	HDMI interrupt number
-- ports:
-	Contain one port node with endpoint definitions as defined in
-	Documentation/devicetree/bindings/graph.txt.
-- pinctrl-0, pinctrl-name:
-	Switch the iomux of HPD/CEC pins to HDMI function.
-
-Example:
-hdmi: hdmi@20034000 {
-	compatible = "rockchip,rk3036-inno-hdmi";
-	reg = <0x20034000 0x4000>;
-	interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&cru  PCLK_HDMI>;
-	clock-names = "pclk";
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_ctl>;
-
-	hdmi_in: port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		hdmi_in_lcdc: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&lcdc_out_hdmi>;
-		};
-	};
-};
-
-&pinctrl {
-	hdmi {
-		hdmi_ctl: hdmi-ctl {
-			rockchip,pins = <1 8  RK_FUNC_1 &pcfg_pull_none>,
-					<1 9  RK_FUNC_1 &pcfg_pull_none>,
-					<1 10 RK_FUNC_1 &pcfg_pull_none>,
-					<1 11 RK_FUNC_1 &pcfg_pull_none>;
-		};
-	};
-
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml
new file mode 100644
index 000000000000..be78dcfa1c76
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,inno-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Innosilicon HDMI controller
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-inno-hdmi
+      - rockchip,rk3128-inno-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: The HDMI controller main clock
+      - description: The HDMI PHY reference clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: pclk
+      - const: ref
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a vop node.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a hdmi-connector node.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pinctrl-0
+  - pinctrl-names
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3036-inno-hdmi
+
+    then:
+      properties:
+        power-domains: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3128-inno-hdmi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+      required:
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3036-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    hdmi: hdmi@20034000 {
+      compatible = "rockchip,rk3036-inno-hdmi";
+      reg = <0x20034000 0x4000>;
+      interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru  PCLK_HDMI>;
+      clock-names = "pclk";
+      pinctrl-names = "default";
+      pinctrl-0 = <&hdmi_ctl>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi_in: port@0 {
+          reg = <0>;
+          hdmi_in_vop: endpoint {
+            remote-endpoint = <&vop_out_hdmi>;
+          };
+        };
+
+        hdmi_out: port@1 {
+          reg = <1>;
+          hdmi_out_con: endpoint {
+            remote-endpoint = <&hdmi_con_in>;
+          };
+        };
+      };
+    };
+
+    pinctrl {
+      hdmi {
+        hdmi_ctl: hdmi-ctl {
+          rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>,
+                          <1 RK_PB1 1 &pcfg_pull_none>,
+                          <1 RK_PB2 1 &pcfg_pull_none>,
+                          <1 RK_PB3 1 &pcfg_pull_none>;
+        };
+      };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
index b60b90472d42..2531726af306 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
@@ -8,8 +8,8 @@ title: Rockchip SoC display controller (VOP2)
 
 description:
   VOP2 (Video Output Processor v2) is the display controller for the Rockchip
-  series of SoCs which transfers the image data from a video memory
-  buffer to an external LCD interface.
+  series of SoCs which transfers the image data from a video memory buffer to
+  an external LCD interface.
 
 maintainers:
   - Sandy Huang <hjc@rock-chips.com>
@@ -20,6 +20,7 @@ properties:
     enum:
       - rockchip,rk3566-vop
       - rockchip,rk3568-vop
+      - rockchip,rk3588-vop
 
   reg:
     items:
@@ -27,8 +28,8 @@ properties:
           Must contain one entry corresponding to the base address and length
           of the register space.
       - description:
-          Can optionally contain a second entry corresponding to
-          the CRTC gamma LUT address.
+          Can optionally contain a second entry corresponding to the CRTC gamma
+          LUT address.
 
   reg-names:
     items:
@@ -41,45 +42,63 @@ properties:
       The VOP interrupt is shared by several interrupt sources, such as
       frame start (VSYNC), line flag and other status interrupts.
 
+  # See compatible-specific constraints below.
   clocks:
+    minItems: 5
     items:
-      - description: Clock for ddr buffer transfer.
-      - description: Clock for the ahb bus to R/W the phy regs.
+      - description: Clock for ddr buffer transfer via axi.
+      - description: Clock for the ahb bus to R/W the regs.
       - description: Pixel clock for video port 0.
       - description: Pixel clock for video port 1.
       - description: Pixel clock for video port 2.
+      - description: Pixel clock for video port 3.
+      - description: Peripheral(vop grf/dsi) clock.
 
   clock-names:
+    minItems: 5
     items:
       - const: aclk
       - const: hclk
       - const: dclk_vp0
       - const: dclk_vp1
       - const: dclk_vp2
+      - const: dclk_vp3
+      - const: pclk_vop
 
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Phandle to GRF regs used for misc control
+      Phandle to GRF regs used for control the polarity of dclk/hsync/vsync of DPI,
+      also used for query vop memory bisr enable status, etc.
+
+  rockchip,vo1-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to VO GRF regs used for control the polarity of dclk/hsync/vsync of hdmi
+      on rk3588.
+
+  rockchip,vop-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to VOP GRF regs used for control data path between vopr and hdmi/edp.
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU GRF used for query vop memory bisr status on rk3588.
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
-    properties:
-      port@0:
+    patternProperties:
+      "^port@[0-3]$":
         $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Output endpoint of VP0
+        description: Output endpoint of VP0/1/2/3.
 
-      port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Output endpoint of VP1
+    required:
+      - port@0
 
-      port@2:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Output endpoint of VP2
+    unevaluatedProperties: false
 
   iommus:
     maxItems: 1
@@ -96,6 +115,49 @@ required:
   - clock-names
   - ports
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-vop
+    then:
+      properties:
+        clocks:
+          minItems: 7
+        clock-names:
+          minItems: 7
+
+        ports:
+          required:
+            - port@0
+            - port@1
+            - port@2
+            - port@3
+
+      required:
+        - rockchip,grf
+        - rockchip,vo1-grf
+        - rockchip,vop-grf
+        - rockchip,pmu
+
+    else:
+      properties:
+        rockchip,vo1-grf: false
+        rockchip,vop-grf: false
+        rockchip,pmu: false
+
+        clocks:
+          maxItems: 5
+        clock-names:
+          maxItems: 5
+
+        ports:
+          required:
+            - port@0
+            - port@1
+            - port@2
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
index 25d53fde92e1..597c9cc6a312 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
@@ -85,7 +85,7 @@ allOf:
         clocks:
           minItems: 6
           maxItems: 6
-        regs:
+        reg:
           minItems: 2
           maxItems: 2
 
@@ -99,7 +99,7 @@ allOf:
         clocks:
           minItems: 4
           maxItems: 4
-        regs:
+        reg:
           minItems: 2
           maxItems: 2
 
@@ -116,7 +116,7 @@ allOf:
         clocks:
           minItems: 3
           maxItems: 3
-        regs:
+        reg:
           minItems: 1
           maxItems: 1
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
index ae09cd3cbce1..b6767ef0d24d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -23,6 +23,7 @@ properties:
   compatible:
     enum:
       - ti,am625-dss
+      - ti,am62a7,dss
       - ti,am65x-dss
 
   reg:
@@ -87,6 +88,7 @@ properties:
           For AM65x DSS, the OLDI output port node from video port 1.
           For AM625 DSS, the internal DPI output port node from video
           port 1.
+          For AM62A7 DSS, the port is tied off inside the SoC.
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
@@ -108,6 +110,18 @@ properties:
       Input memory (from main memory to dispc) bandwidth limit in
       bytes per second
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am62a7-dss
+    then:
+      properties:
+        ports:
+          properties:
+            port@0: false
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/dma-controller.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/dma-controller.yaml
index 04d150d4d15d..e6afca558c2d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/dma-controller.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/dma-controller.yaml
@@ -19,19 +19,4 @@ properties:
 
 additionalProperties: true
 
-examples:
-  - |
-    dma: dma-controller@48000000 {
-        compatible = "ti,omap-sdma";
-        reg = <0x48000000 0x1000>;
-        interrupts = <0 12 0x4>,
-                     <0 13 0x4>,
-                     <0 14 0x4>,
-                     <0 15 0x4>;
-        #dma-cells = <1>;
-        dma-channels = <32>;
-        dma-requests = <127>;
-        dma-channel-mask = <0xfffe>;
-    };
-
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/dma-router.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/dma-router.yaml
index 346fe0fa4460..5ad2febc581e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/dma-router.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/dma-router.yaml
@@ -40,15 +40,4 @@ required:
 
 additionalProperties: true
 
-examples:
-  - |
-    sdma_xbar: dma-router@4a002b78 {
-        compatible = "ti,dra7-dma-crossbar";
-        reg = <0x4a002b78 0xfc>;
-        #dma-cells = <1>;
-        dma-requests = <205>;
-        ti,dma-safe-map = <0>;
-        dma-masters = <&sdma>;
-    };
-
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml
new file mode 100644
index 000000000000..6a1b49a49a64
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/loongson,ls2x-apbdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson LS2X APB DMA controller
+
+description:
+  The Loongson LS2X APB DMA controller is used for transferring data
+  between system memory and the peripherals on the APB bus.
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: loongson,ls2k1000-apbdma
+      - items:
+          - const: loongson,ls2k0500-apbdma
+          - const: loongson,ls2k1000-apbdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+    dma-controller@1fe00c00 {
+        compatible = "loongson,ls2k1000-apbdma";
+        reg = <0x1fe00c00 0x8>;
+        interrupt-parent = <&liointc1>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk LOONGSON2_APB_CLK>;
+        #dma-cells = <1>;
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
index 4003dbe94940..877147e95ecc 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
@@ -53,6 +53,9 @@ properties:
       ADMA_CHn_CTRL register.
     const: 1
 
+  dma-channel-mask:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/qcom,gpi.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
index 88d0de3d1b46..deb64cb9ca3e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
@@ -32,6 +32,8 @@ properties:
               - qcom,sm8350-gpi-dma
               - qcom,sm8450-gpi-dma
               - qcom,sm8550-gpi-dma
+              - qcom,sm8650-gpi-dma
+              - qcom,x1e80100-gpi-dma
           - const: qcom,sm6350-gpi-dma
       - items:
           - enum:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
index c284abc6784a..a42b6a26a6d3 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
@@ -16,7 +16,7 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,r9a07g043-dmac # RZ/G2UL
+          - renesas,r9a07g043-dmac # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-dmac # RZ/G2{L,LC}
           - renesas,r9a07g054-dmac # RZ/V2L
       - const: renesas,rz-dmac
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
index a1af0b906365..3b22183a1a37 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -29,6 +29,7 @@ properties:
   compatible:
     items:
       - enum:
+          - microchip,mpfs-pdma
           - sifive,fu540-c000-pdma
       - const: sifive,pdma0
     description:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
index 4ca300a42a99..27b8e1636560 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
@@ -37,11 +37,11 @@ properties:
 
   reg:
     minItems: 3
-    maxItems: 5
+    maxItems: 9
 
   reg-names:
     minItems: 3
-    maxItems: 5
+    maxItems: 9
 
   "#dma-cells":
     const: 3
@@ -141,7 +141,10 @@ allOf:
         ti,sci-rm-range-tchan: false
 
         reg:
-          maxItems: 3
+          items:
+            - description: BCDMA Control /Status Registers region
+            - description: RX Channel Realtime Registers region
+            - description: Ring Realtime Registers region
 
         reg-names:
           items:
@@ -161,14 +164,29 @@ allOf:
       properties:
         reg:
           minItems: 5
+          items:
+            - description: BCDMA Control /Status Registers region
+            - description: Block Copy Channel Realtime Registers region
+            - description: RX Channel Realtime Registers region
+            - description: TX Channel Realtime Registers region
+            - description: Ring Realtime Registers region
+            - description: Ring Configuration Registers region
+            - description: TX Channel Configuration Registers region
+            - description: RX Channel Configuration Registers region
+            - description: Block Copy Channel Configuration Registers region
 
         reg-names:
+          minItems: 5
           items:
             - const: gcfg
             - const: bchanrt
             - const: rchanrt
             - const: tchanrt
             - const: ringrt
+            - const: ring
+            - const: tchan
+            - const: rchan
+            - const: bchan
 
       required:
         - ti,sci-rm-range-bchan
@@ -184,7 +202,11 @@ allOf:
         ti,sci-rm-range-bchan: false
 
         reg:
-          maxItems: 4
+          items:
+            - description: BCDMA Control /Status Registers region
+            - description: RX Channel Realtime Registers region
+            - description: TX Channel Realtime Registers region
+            - description: Ring Realtime Registers region
 
         reg-names:
           items:
@@ -220,8 +242,13 @@ examples:
                       <0x0 0x4c000000 0x0 0x20000>,
                       <0x0 0x4a820000 0x0 0x20000>,
                       <0x0 0x4aa40000 0x0 0x20000>,
-                      <0x0 0x4bc00000 0x0 0x100000>;
-                reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+                      <0x0 0x4bc00000 0x0 0x100000>,
+                      <0x0 0x48600000 0x0 0x8000>,
+                      <0x0 0x484a4000 0x0 0x2000>,
+                      <0x0 0x484c2000 0x0 0x2000>,
+                      <0x0 0x48420000 0x0 0x2000>;
+                reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+                            "ring", "tchan", "rchan", "bchan";
                 msi-parent = <&inta_main_dmss>;
                 #dma-cells = <3>;
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
index a69f62f854d8..11e064c02994 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
@@ -45,14 +45,28 @@ properties:
       The second cell is the ASEL value for the channel
 
   reg:
-    maxItems: 4
+    minItems: 4
+    items:
+      - description: Packet DMA Control /Status Registers region
+      - description: RX Channel Realtime Registers region
+      - description: TX Channel Realtime Registers region
+      - description: Ring Realtime Registers region
+      - description: Ring Configuration Registers region
+      - description: TX Configuration Registers region
+      - description: RX Configuration Registers region
+      - description: RX Flow Configuration Registers region
 
   reg-names:
+    minItems: 4
     items:
       - const: gcfg
       - const: rchanrt
       - const: tchanrt
       - const: ringrt
+      - const: ring
+      - const: tchan
+      - const: rchan
+      - const: rflow
 
   msi-parent: true
 
@@ -136,8 +150,14 @@ examples:
                 reg = <0x0 0x485c0000 0x0 0x100>,
                       <0x0 0x4a800000 0x0 0x20000>,
                       <0x0 0x4aa00000 0x0 0x40000>,
-                      <0x0 0x4b800000 0x0 0x400000>;
-                reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+                      <0x0 0x4b800000 0x0 0x400000>,
+                      <0x0 0x485e0000 0x0 0x20000>,
+                      <0x0 0x484a0000 0x0 0x4000>,
+                      <0x0 0x484c0000 0x0 0x2000>,
+                      <0x0 0x48430000 0x0 0x4000>;
+                reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+                            "ring", "tchan", "rchan", "rflow";
+
                 msi-parent = <&inta_main_dmss>;
                 #dma-cells = <2>;
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
index 22f6c5e2f7f4..b18cf2bfdb5b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@@ -69,13 +69,24 @@ properties:
       - ti,j721e-navss-mcu-udmap
 
   reg:
-    maxItems: 3
+    minItems: 3
+    items:
+      - description: UDMA-P Control /Status Registers region
+      - description: RX Channel Realtime Registers region
+      - description: TX Channel Realtime Registers region
+      - description: TX Configuration Registers region
+      - description: RX Configuration Registers region
+      - description: RX Flow Configuration Registers region
 
   reg-names:
+    minItems: 3
     items:
       - const: gcfg
       - const: rchanrt
       - const: tchanrt
+      - const: tchan
+      - const: rchan
+      - const: rflow
 
   msi-parent: true
 
@@ -158,8 +169,11 @@ examples:
                 compatible = "ti,am654-navss-main-udmap";
                 reg = <0x0 0x31150000 0x0 0x100>,
                       <0x0 0x34000000 0x0 0x100000>,
-                      <0x0 0x35000000 0x0 0x100000>;
-                reg-names = "gcfg", "rchanrt", "tchanrt";
+                      <0x0 0x35000000 0x0 0x100000>,
+                      <0x0 0x30b00000 0x0 0x20000>,
+                      <0x0 0x30c00000 0x0 0x8000>,
+                      <0x0 0x30d00000 0x0 0x4000>;
+                reg-names = "gcfg", "rchanrt", "tchanrt", "tchan", "rchan", "rflow";
                 #dma-cells = <1>;
 
                 ti,ringacc = <&ringacc>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/dts-coding-style.rst linux-libre-6.8-gnu/Documentation/devicetree/bindings/dts-coding-style.rst
new file mode 100644
index 000000000000..a9bdd2b59dca
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/dts-coding-style.rst
@@ -0,0 +1,196 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Devicetree Sources (DTS) Coding Style
+=====================================
+
+When writing Devicetree Sources (DTS) please observe below guidelines.  They
+should be considered complementary to any rules expressed already in
+the Devicetree Specification and the dtc compiler (including W=1 and W=2
+builds).
+
+Individual architectures and subarchitectures can define additional rules,
+making the coding style stricter.
+
+Naming and Valid Characters
+---------------------------
+
+The Devicetree Specification allows a broad range of characters in node
+and property names, but this coding style narrows the range down to achieve
+better code readability.
+
+1. Node and property names can use only the following characters:
+
+   * Lowercase characters: [a-z]
+   * Digits: [0-9]
+   * Dash: -
+
+2. Labels can use only the following characters:
+
+   * Lowercase characters: [a-z]
+   * Digits: [0-9]
+   * Underscore: _
+
+3. Unless a bus defines differently, unit addresses shall use lowercase
+   hexadecimal digits, without leading zeros (padding).
+
+4. Hex values in properties, e.g. "reg", shall use lowercase hex.  The address
+   part can be padded with leading zeros.
+
+Example::
+
+	gpi_dma2: dma-controller@a00000 {
+		compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
+		reg = <0x0 0x00a00000 0x0 0x60000>;
+	}
+
+Order of Nodes
+--------------
+
+1. Nodes on any bus, thus using unit addresses for children, shall be
+   ordered by unit address in ascending order.
+   Alternatively for some subarchitectures, nodes of the same type can be
+   grouped together, e.g. all I2C controllers one after another even if this
+   breaks unit address ordering.
+
+2. Nodes without unit addresses shall be ordered alpha-numerically by the node
+   name.  For a few node types, they can be ordered by the main property, e.g.
+   pin configuration states ordered by value of "pins" property.
+
+3. When extending nodes in the board DTS via &label, the entries shall be
+   ordered either alpha-numerically or by keeping the order from DTSI, where
+   the choice depends on the subarchitecture.
+
+The above-described ordering rules are easy to enforce during review, reduce
+chances of conflicts for simultaneous additions of new nodes to a file and help
+in navigating through the DTS source.
+
+Example::
+
+	/* SoC DTSI */
+
+	/ {
+		cpus {
+			/* ... */
+		};
+
+		psci {
+			/* ... */
+		};
+
+		soc@0 {
+			dma: dma-controller@10000 {
+				/* ... */
+			};
+
+			clk: clock-controller@80000 {
+				/* ... */
+			};
+		};
+	};
+
+	/* Board DTS - alphabetical order */
+
+	&clk {
+		/* ... */
+	};
+
+	&dma {
+		/* ... */
+	};
+
+	/* Board DTS - alternative order, keep as DTSI */
+
+	&dma {
+		/* ... */
+	};
+
+	&clk {
+		/* ... */
+	};
+
+Order of Properties in Device Node
+----------------------------------
+
+The following order of properties in device nodes is preferred:
+
+1. "compatible"
+2. "reg"
+3. "ranges"
+4. Standard/common properties (defined by common bindings, e.g. without
+   vendor-prefixes)
+5. Vendor-specific properties
+6. "status" (if applicable)
+7. Child nodes, where each node is preceded with a blank line
+
+The "status" property is by default "okay", thus it can be omitted.
+
+The above-described ordering follows this approach:
+
+1. Most important properties start the node: compatible then bus addressing to
+   match unit address.
+2. Each node will have common properties in similar place.
+3. Status is the last information to annotate that device node is or is not
+   finished (board resources are needed).
+
+Example::
+
+	/* SoC DTSI */
+
+	device_node: device-class@6789abc {
+		compatible = "vendor,device";
+		reg = <0x0 0x06789abc 0x0 0xa123>;
+		ranges = <0x0 0x0 0x06789abc 0x1000>;
+		#dma-cells = <1>;
+		clocks = <&clock_controller 0>, <&clock_controller 1>;
+		clock-names = "bus", "host";
+		vendor,custom-property = <2>;
+		status = "disabled";
+
+		child_node: child-class@100 {
+			reg = <0x100 0x200>;
+			/* ... */
+		};
+	};
+
+	/* Board DTS */
+
+	&device_node {
+		vdd-supply = <&board_vreg1>;
+		status = "okay";
+	}
+
+Indentation
+-----------
+
+1. Use indentation according to Documentation/process/coding-style.rst.
+2. Each entry in arrays with multiple cells, e.g. "reg" with two IO addresses,
+   shall be enclosed in <>.
+3. For arrays spanning across lines, it is preferred to align the continued
+   entries with opening < from the first line.
+
+Example::
+
+	thermal-sensor@c271000 {
+		compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
+		reg = <0x0 0x0c271000 0x0 0x1000>,
+		      <0x0 0x0c222000 0x0 0x1000>;
+	};
+
+Organizing DTSI and DTS
+-----------------------
+
+The DTSI and DTS files shall be organized in a way representing the common,
+reusable parts of hardware.  Typically, this means organizing DTSI and DTS files
+into several files:
+
+1. DTSI with contents of the entire SoC, without nodes for hardware not present
+   on the SoC.
+2. If applicable: DTSI with common or re-usable parts of the hardware, e.g.
+   entire System-on-Module.
+3. DTS representing the board.
+
+Hardware components that are present on the board shall be placed in the
+board DTS, not in the SoC or SoM DTSI.  A partial exception is a common
+external reference SoC input clock, which could be coded as a fixed-clock in
+the SoC DTSI with its frequency provided by each board DTS.
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/eeprom/at24.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/eeprom/at24.yaml
index b6864d0ee81e..1812ef31d5f1 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -123,6 +123,7 @@ properties:
           - enum:
               - onnn,cat24c04
               - onnn,cat24c05
+              - rohm,br24g04
           - const: atmel,24c04
       - items:
           - const: renesas,r1ex24016
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/firmware/qcom,scm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index 0613a37a851a..47d3d2d52acd 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -63,7 +63,9 @@ properties:
           - qcom,scm-sm8350
           - qcom,scm-sm8450
           - qcom,scm-sm8550
+          - qcom,scm-sm8650
           - qcom,scm-qcs404
+          - qcom,scm-x1e80100
       - const: qcom,scm
 
   clocks:
@@ -178,21 +180,6 @@ allOf:
           minItems: 3
           maxItems: 3
 
-  # Interconnects
-  - if:
-      not:
-        properties:
-          compatible:
-            contains:
-              enum:
-                - qcom,scm-qdu1000
-                - qcom,scm-sc8280xp
-                - qcom,scm-sm8450
-                - qcom,scm-sm8550
-    then:
-      properties:
-        interconnects: false
-
   # Interrupts
   - if:
       not:
@@ -202,6 +189,7 @@ allOf:
               enum:
                 - qcom,scm-sm8450
                 - qcom,scm-sm8550
+                - qcom,scm-sm8650
     then:
       properties:
         interrupts: false
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
index 822864488dcb..8e584857ddd4 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
@@ -95,8 +95,8 @@ examples:
       versal_clk: clock-controller {
         #clock-cells = <1>;
         compatible = "xlnx,versal-clk";
-        clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
-        clock-names = "ref", "alt_ref", "pl_alt_ref";
+        clocks = <&ref>, <&pl_alt_ref>;
+        clock-names = "ref", "pl_alt_ref";
       };
     };
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
deleted file mode 100644
index 5dd0ff0f7b4e..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Altera FPGA To SDRAM Bridge Driver
-
-Required properties:
-- compatible		: Should contain "altr,socfpga-fpga2sdram-bridge"
-
-See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
-	fpga_bridge3: fpga-bridge@ffc25080 {
-		compatible = "altr,socfpga-fpga2sdram-bridge";
-		reg = <0xffc25080 0x4>;
-		bridge-enable = <0>;
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
deleted file mode 100644
index 8b26fbcff3c6..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Altera Freeze Bridge Controller Driver
-
-The Altera Freeze Bridge Controller manages one or more freeze bridges.
-The controller can freeze/disable the bridges which prevents signal
-changes from passing through the bridge.  The controller can also
-unfreeze/enable the bridges which allows traffic to pass through the
-bridge normally.
-
-Required properties:
-- compatible		: Should contain "altr,freeze-bridge-controller"
-- regs			: base address and size for freeze bridge module
-
-See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
-	freeze-controller@100000450 {
-		compatible = "altr,freeze-bridge-controller";
-		regs = <0x1000 0x10>;
-		bridge-enable = <0>;
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
deleted file mode 100644
index 68cce3945b10..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Altera FPGA/HPS Bridge Driver
-
-Required properties:
-- regs		: base address and size for AXI bridge module
-- compatible	: Should contain one of:
-		  "altr,socfpga-lwhps2fpga-bridge",
-		  "altr,socfpga-hps2fpga-bridge", or
-		  "altr,socfpga-fpga2hps-bridge"
-- resets	: Phandle and reset specifier for this bridge's reset
-- clocks	: Clocks used by this module.
-
-See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
-	fpga_bridge0: fpga-bridge@ff400000 {
-		compatible = "altr,socfpga-lwhps2fpga-bridge";
-		reg = <0xff400000 0x100000>;
-		resets = <&rst LWHPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-		bridge-enable = <0>;
-	};
-
-	fpga_bridge1: fpga-bridge@ff500000 {
-		compatible = "altr,socfpga-hps2fpga-bridge";
-		reg = <0xff500000 0x10000>;
-		resets = <&rst HPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-		bridge-enable = <1>;
-	};
-
-	fpga_bridge2: fpga-bridge@ff600000 {
-		compatible = "altr,socfpga-fpga2hps-bridge";
-		reg = <0xff600000 0x100000>;
-		resets = <&rst FPGA2HPS_RESET>;
-		clocks = <&l4_main_clk>;
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/altr,freeze-bridge-controller.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/altr,freeze-bridge-controller.yaml
new file mode 100644
index 000000000000..fccffeebb256
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/altr,freeze-bridge-controller.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,freeze-bridge-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera Freeze Bridge Controller
+
+description:
+  The Altera Freeze Bridge Controller manages one or more freeze bridges.
+  The controller can freeze/disable the bridges which prevents signal
+  changes from passing through the bridge. The controller can also
+  unfreeze/enable the bridges which allows traffic to pass through the bridge
+  normally.
+
+maintainers:
+  - Xu Yilun <yilun.xu@intel.com>
+
+allOf:
+  - $ref: fpga-bridge.yaml#
+
+properties:
+  compatible:
+    const: altr,freeze-bridge-controller
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fpga-bridge@100000450 {
+        compatible = "altr,freeze-bridge-controller";
+        reg = <0x1000 0x10>;
+        bridge-enable = <0>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/altr,socfpga-fpga2sdram-bridge.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/altr,socfpga-fpga2sdram-bridge.yaml
new file mode 100644
index 000000000000..22b58453c5ff
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/altr,socfpga-fpga2sdram-bridge.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,socfpga-fpga2sdram-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera FPGA To SDRAM Bridge
+
+maintainers:
+  - Xu Yilun <yilun.xu@intel.com>
+
+allOf:
+  - $ref: fpga-bridge.yaml#
+
+properties:
+  compatible:
+    const: altr,socfpga-fpga2sdram-bridge
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fpga-bridge@ffc25080 {
+        compatible = "altr,socfpga-fpga2sdram-bridge";
+        reg = <0xffc25080 0x4>;
+        bridge-enable = <0>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/altr,socfpga-hps2fpga-bridge.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/altr,socfpga-hps2fpga-bridge.yaml
new file mode 100644
index 000000000000..d19c6660d6c9
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/altr,socfpga-hps2fpga-bridge.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,socfpga-hps2fpga-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera FPGA/HPS Bridge
+
+maintainers:
+  - Xu Yilun <yilun.xu@intel.com>
+
+allOf:
+  - $ref: fpga-bridge.yaml#
+
+properties:
+  compatible:
+    enum:
+      - altr,socfpga-lwhps2fpga-bridge
+      - altr,socfpga-hps2fpga-bridge
+      - altr,socfpga-fpga2hps-bridge
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/altr,rst-mgr.h>
+
+    fpga-bridge@ff400000 {
+      compatible = "altr,socfpga-lwhps2fpga-bridge";
+      reg = <0xff400000 0x100000>;
+      bridge-enable = <0>;
+      clocks = <&l4_main_clk>;
+      resets = <&rst LWHPS2FPGA_RESET>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/fpga-bridge.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/fpga-bridge.txt
deleted file mode 100644
index 72e06917288a..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/fpga-bridge.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-FPGA Bridge Device Tree Binding
-
-Optional properties:
-- bridge-enable		: 0 if driver should disable bridge at startup
-			  1 if driver should enable bridge at startup
-			  Default is to leave bridge in current state.
-
-Example:
-	fpga_bridge3: fpga-bridge@ffc25080 {
-		compatible = "altr,socfpga-fpga2sdram-bridge";
-		reg = <0xffc25080 0x4>;
-		bridge-enable = <0>;
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/fpga-bridge.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/fpga-bridge.yaml
new file mode 100644
index 000000000000..1ccb2aa18726
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/fpga-bridge.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/fpga-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FPGA Bridge
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+properties:
+  $nodename:
+    pattern: "^fpga-bridge(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  bridge-enable:
+    description: |
+      0 if driver should disable bridge at startup
+      1 if driver should enable bridge at startup
+      Default is to leave bridge in current state.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+
+additionalProperties: true
+
+examples:
+  - |
+    fpga-bridge {
+        bridge-enable = <0>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
index a7d4b8e59e19..5bf731f9d99a 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
@@ -9,6 +9,9 @@ title: Xilinx LogiCORE Partial Reconfig Decoupler/AXI shutdown manager Softcore
 maintainers:
   - Nava kishore Manne <nava.kishore.manne@amd.com>
 
+allOf:
+  - $ref: fpga-bridge.yaml#
+
 description: |
   The Xilinx LogiCORE Partial Reconfig(PR) Decoupler manages one or more
   decouplers/fpga bridges. The controller can decouple/disable the bridges
@@ -51,7 +54,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
index 4835a280b3bf..cd80668182b6 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
@@ -28,6 +28,9 @@ properties:
       port or the USB host-controller port to which this device is attached,
       depending on the bus used. Required for the DDC, SPI or USB busses.
 
+  reset-gpios:
+    maxItems: 1
+
   vcc-supply:
     description: >
       Main voltage regulator
@@ -49,10 +52,13 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     serial {
         gnss {
             compatible = "u-blox,neo-8";
             v-bckp-supply = <&gnss_v_bckp_reg>;
             vcc-supply = <&gnss_vcc_reg>;
+            reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
         };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
index 4a896ff7edc5..a1e71c974e79 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
@@ -72,7 +72,7 @@ required:
   - reg
   - gpio-controller
   - "#gpio-cells"
-  - "brcm,gpio-bank-widths"
+  - brcm,gpio-bank-widths
 
 additionalProperties: false
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
new file mode 100644
index 000000000000..9e32e54aeb24
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nuvoton,sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton SGPIO controller
+
+maintainers:
+  - Jim LIU <JJLIU0@nuvoton.com>
+
+description: |
+  This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC and detailed
+  information is in the NPCM7XX/8XX SERIAL I/O EXPANSION INTERFACE section.
+  Nuvoton NPCM7xx SGPIO module is combines a serial to parallel IC (HC595)
+  and a parallel to serial IC (HC165).
+  Clock is a division of the APB3 clock.
+  This interface has 4 pins (D_out , D_in, S_CLK, LDSH).
+  NPCM7xx/NPCM8xx have two sgpio modules. Each module can support up
+  to 64 output pins, and up to 64 input pins, the pin is only for GPI or GPO.
+  GPIO pins can be programmed to support the following options
+  - Support interrupt option for each input port and various interrupt
+    sensitivity options (level-high, level-low, edge-high, edge-low)
+  - ngpios is number of nuvoton,input-ngpios GPIO lines and nuvoton,output-ngpios GPIO lines.
+    nuvoton,input-ngpios GPIO lines is only for GPI.
+    nuvoton,output-ngpios GPIO lines is only for GPO.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-sgpio
+      - nuvoton,npcm845-sgpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  nuvoton,input-ngpios:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The numbers of GPIO's exposed. GPIO lines are only for GPI.
+    minimum: 0
+    maximum: 64
+
+  nuvoton,output-ngpios:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The numbers of GPIO's exposed. GPIO lines are only for GPO.
+    minimum: 0
+    maximum: 64
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupts
+  - nuvoton,input-ngpios
+  - nuvoton,output-ngpios
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    gpio8: gpio@101000 {
+        compatible = "nuvoton,npcm750-sgpio";
+        reg = <0x101000 0x200>;
+        clocks = <&clk NPCM7XX_CLK_APB3>;
+        interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        nuvoton,input-ngpios = <64>;
+        nuvoton,output-ngpios = <64>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml
new file mode 100644
index 000000000000..dd768db37a98
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/realtek,rtd-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC GPIO controller
+
+maintainers:
+  - Tzuyi Chang <tychang@realtek.com>
+
+description:
+  The GPIO controller is designed for the Realtek DHC (Digital Home Center)
+  RTD series SoC family, which are high-definition media processor SoCs.
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtd1295-misc-gpio
+      - realtek,rtd1295-iso-gpio
+      - realtek,rtd1315e-iso-gpio
+      - realtek,rtd1319-iso-gpio
+      - realtek,rtd1319d-iso-gpio
+      - realtek,rtd1395-iso-gpio
+      - realtek,rtd1619-iso-gpio
+      - realtek,rtd1619b-iso-gpio
+
+  reg:
+    items:
+      - description: GPIO controller registers
+      - description: GPIO interrupt registers
+
+  interrupts:
+    items:
+      - description: Interrupt number of the assert GPIO interrupt, which is
+                     triggered when there is a rising edge.
+      - description: Interrupt number of the deassert GPIO interrupt, which is
+                     triggered when there is a falling edge.
+
+  gpio-ranges: true
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio-ranges
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@100 {
+      compatible = "realtek,rtd1319d-iso-gpio";
+      reg = <0x100 0x100>,
+            <0x0 0xb0>;
+      interrupt-parent = <&iso_irq_mux>;
+      interrupts = <19>, <20>;
+      gpio-ranges = <&pinctrl 0 0 82>;
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
index affd823c881d..d76987ce8e50 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
@@ -41,6 +41,13 @@ properties:
   "#interrupt-cells":
     const: 2
 
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    required:
+      - gpio-hog
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
index eefe7b345286..ab2afc0e4153 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
@@ -65,6 +65,8 @@ patternProperties:
         minItems: 1
         maxItems: 32
 
+      gpio-ranges: true
+
       ngpios:
         default: 32
         minimum: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
index c1060e5fcef3..d3d8a2e143ed 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
@@ -126,7 +126,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-        gpio@e000a000 {
+        gpio@a0020000 {
             compatible = "xlnx,xps-gpio-1.00.a";
             reg = <0xa0020000 0x10000>;
             #gpio-cells = <2>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
index 56143f1fe84a..bb93baa88879 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
@@ -12,7 +12,8 @@ description:
   PS_MODE). Every pin can be configured as input/output.
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@amd.com>
+  - Mubin Sayyed <mubin.sayyed@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 properties:
   compatible:
@@ -23,6 +24,8 @@ properties:
   "#gpio-cells":
     const: 2
 
+  label: true
+
 required:
   - compatible
   - gpio-controller
@@ -37,6 +40,7 @@ examples:
             compatible = "xlnx,zynqmp-gpio-modepin";
             gpio-controller;
             #gpio-cells = <2>;
+            label = "modepin";
         };
     };
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index ca02baba5526..0801da33a385 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -40,6 +40,11 @@ properties:
               - rockchip,rk3288-mali
               - samsung,exynos5433-mali
           - const: arm,mali-t760
+      - items:
+          - enum:
+              - samsung,exynos7-mali
+          - const: samsung,exynos5433-mali
+          - const: arm,mali-t760
       - items:
           - enum:
               - rockchip,rk3399-mali
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index 0fae1ef013be..abd4aa335fbc 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -29,6 +29,7 @@ properties:
               - allwinner,sun50i-a64-mali
               - rockchip,rk3036-mali
               - rockchip,rk3066-mali
+              - rockchip,rk3128-mali
               - rockchip,rk3188-mali
               - rockchip,rk3228-mali
               - samsung,exynos4210-mali
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
index dae55b8a267b..dc078ceeca9a 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     enum:
       - brcm,2711-v3d
+      - brcm,2712-v3d
       - brcm,7268-v3d
       - brcm,7278-v3d
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpu/img,powervr.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/img,powervr.yaml
new file mode 100644
index 000000000000..a13298f1a182
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/img,powervr.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Imagination Technologies Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/img,powervr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination Technologies PowerVR and IMG GPU
+
+maintainers:
+  - Frank Binns <frank.binns@imgtec.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,am62-gpu
+      - const: img,img-axe # IMG AXE GPU model/revision is fully discoverable
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: core
+      - const: mem
+      - const: sys
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am62-gpu
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    gpu@fd00000 {
+        compatible = "ti,am62-gpu", "img,img-axe";
+        reg = <0x0fd00000 0x20000>;
+        clocks = <&k3_clks 187 0>;
+        clock-names = "core";
+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml
index e7daae862578..132aaa49597b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml
@@ -22,36 +22,20 @@ properties:
   interrupts:
     maxItems: 1
 
-  clocks: {}
-  clock-names: {}
-  iommus: {}
-  power-domains: {}
-
-if:
-  properties:
-    compatible:
-      contains:
-        const: samsung,exynos5250-g2d
-
-then:
-  properties:
-    clocks:
-      items:
-        - description: fimg2d clock
-    clock-names:
-      items:
-        - const: fimg2d
-
-else:
-  properties:
-    clocks:
-      items:
-        - description: sclk_fimg2d clock
-        - description: fimg2d clock
-    clock-names:
-      items:
-        - const: sclk_fimg2d
-        - const: fimg2d
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
 
 required:
   - compatible
@@ -60,6 +44,33 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5250-g2d
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: fimg2d clock
+        clock-names:
+          items:
+            - const: fimg2d
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: sclk_fimg2d clock
+            - description: fimg2d clock
+        clock-names:
+          items:
+            - const: sclk_fimg2d
+            - const: fimg2d
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
index d60626ffb28e..18bf44e06e8f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -12,10 +12,11 @@ maintainers:
 properties:
   compatible:
     enum:
-      - "samsung,s5pv210-rotator"
-      - "samsung,exynos4210-rotator"
-      - "samsung,exynos4212-rotator"
-      - "samsung,exynos5250-rotator"
+      - samsung,s5pv210-rotator
+      - samsung,exynos4210-rotator
+      - samsung,exynos4212-rotator
+      - samsung,exynos5250-rotator
+
   reg:
     maxItems: 1
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml
index 5317ac64426a..9fb530e65d0e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml
@@ -21,40 +21,20 @@ properties:
   interrupts:
     maxItems: 1
 
-  clocks: {}
-  clock-names: {}
-  iommus: {}
-  power-domains: {}
-
-if:
-  properties:
-    compatible:
-      contains:
-        const: samsung,exynos5420-scaler
-
-then:
-  properties:
-    clocks:
-      items:
-        - description: mscl clock
-
-    clock-names:
-      items:
-        - const: mscl
-
-else:
-  properties:
-    clocks:
-      items:
-        - description: pclk clock
-        - description: aclk clock
-        - description: aclk_xiu clock
-
-    clock-names:
-      items:
-        - const: pclk
-        - const: aclk
-        - const: aclk_xiu
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
 
 required:
   - compatible
@@ -63,6 +43,39 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5420-scaler
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: mscl clock
+        clock-names:
+          items:
+            - const: mscl
+        iommus:
+          minItems: 2
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: pclk clock
+            - description: aclk clock
+            - description: aclk_xiu clock
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+        iommus:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml
index 95cbdcb56efe..780ccb5ee9b4 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml
@@ -11,9 +11,21 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - samsung,exynos4210-chipid
-      - samsung,exynos850-chipid
+    oneOf:
+      - enum:
+          - samsung,exynos4210-chipid
+          - samsung,exynos850-chipid
+      - items:
+          - enum:
+              - samsung,exynos5433-chipid
+              - samsung,exynos7-chipid
+          - const: samsung,exynos4210-chipid
+      - items:
+          - enum:
+              - samsung,exynos7885-chipid
+              - samsung,exynosautov9-chipid
+              - samsung,exynosautov920-chipid
+          - const: samsung,exynos850-chipid
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/hwmon/gpio-fan.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
deleted file mode 100644
index f4cfa350f6a1..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Bindings for fan connected to GPIO lines
-
-Required properties:
-- compatible : "gpio-fan"
-
-Optional properties:
-- gpios: Specifies the pins that map to bits in the control value,
-  ordered MSB-->LSB.
-- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
-  control value that should be set to achieve them. This array
-  must have the RPM values in ascending order.
-- alarm-gpios: This pin going active indicates something is wrong with
-  the fan, and a udev event will be fired.
-- #cooling-cells: If used as a cooling device, must be <2>
-  Also see:
-  Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
-  min and max states are derived from the speed-map of the fan.
-
-Note: At least one the "gpios" or "alarm-gpios" properties must be set.
-
-Examples:
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio1 14 1
-			 &gpio1 13 1>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
-		alarm-gpios = <&gpio1 15 1>;
-	};
-	gpio_fan_cool: gpio_fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio2 14 1
-			 &gpio2 13 1>;
-		gpio-fan,speed-map =	<0    0>,
-					<3000 1>,
-					<6000 2>;
-		alarm-gpios = <&gpio2 15 1>;
-		#cooling-cells = <2>; /* min followed by max */
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
new file mode 100644
index 000000000000..7f30cfc87350
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/gpio-fan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fan connected to GPIO lines
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    const: gpio-fan
+
+  gpios:
+    description: |
+      Specifies the pins that map to bits in the control value,
+      ordered MSB-->LSB.
+    minItems: 1
+    maxItems: 7
+
+  alarm-gpios:
+    maxItems: 1
+
+  gpio-fan,speed-map:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 2
+    maxItems: 127
+    items:
+      items:
+        - description: fan speed in RPMs
+        - description: control value
+    description: |
+      A mapping of possible fan RPM speeds and the
+      control value that should be set to achieve them. This array
+      must have the RPM values in ascending order.
+
+  '#cooling-cells':
+    const: 2
+
+required:
+  - compatible
+  - gpios
+  - gpio-fan,speed-map
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio-fan {
+      compatible = "gpio-fan";
+      gpios = <&gpio2 14 1
+               &gpio2 13 1>;
+      gpio-fan,speed-map = <   0 0>,
+                           <3000 1>,
+                           <6000 2>;
+      alarm-gpios = <&gpio2 15 1>;
+      #cooling-cells = <2>; /* min followed by max */
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
index e5b24782f448..be5c7d4579bb 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
@@ -19,7 +19,7 @@ properties:
 
   io-channels:
     minItems: 1
-    maxItems: 8 # Should be enough
+    maxItems: 51 # Should be enough
     description: >
       List of phandles to ADC channels to read the monitoring values
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
new file mode 100644
index 000000000000..98ca163d3486
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lltc,ltc4286.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTC4286 power monitors
+
+maintainers:
+  - Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc4286
+      - lltc,ltc4287
+
+  reg:
+    maxItems: 1
+
+  adi,vrange-low-enable:
+    description:
+      This property is a bool parameter to represent the
+      voltage range is 25.6 volts or 102.4 volts for this chip.
+      The default is 102.4 volts.
+    type: boolean
+
+  shunt-resistor-micro-ohms:
+    description:
+      Resistor value micro-ohms.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@40 {
+            compatible = "lltc,ltc4286";
+            reg = <0x40>;
+            adi,vrange-low-enable;
+            shunt-resistor-micro-ohms = <300>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/hwmon/lm75.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/lm75.yaml
index 0b69897f0c63..ed269e428a3d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/hwmon/lm75.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/lm75.yaml
@@ -14,6 +14,7 @@ properties:
   compatible:
     enum:
       - adi,adt75
+      - ams,as6200
       - atmel,at30ts74
       - dallas,ds1775
       - dallas,ds75
@@ -48,10 +49,28 @@ properties:
   vs-supply:
     description: phandle to the regulator that provides the +VS supply
 
+  interrupts:
+    maxItems: 1
+
 required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ams,as6200
+                - ti,tmp100
+                - ti,tmp101
+                - ti,tmp112
+    then:
+      properties:
+        interrupts: false
+
 additionalProperties: false
 
 examples:
@@ -66,3 +85,17 @@ examples:
         vs-supply = <&vs>;
       };
     };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      temperature-sensor@48 {
+        compatible = "ams,as6200";
+        reg = <0x48>;
+        vs-supply = <&vs>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <17 IRQ_TYPE_EDGE_BOTH>;
+      };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
index 3e52a0db6c41..df9c57bca2a8 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
@@ -25,7 +25,16 @@ properties:
           - samsung,exynos5250-hsi2c    # Exynos5250 and Exynos5420
           - samsung,exynos5260-hsi2c    # Exynos5260
           - samsung,exynos7-hsi2c       # Exynos7
-          - samsung,exynosautov9-hsi2c  # ExynosAutoV9 and Exynos850
+          - samsung,exynosautov9-hsi2c
+      - items:
+          - enum:
+              - samsung,exynos5433-hsi2c
+              - tesla,fsd-hsi2c
+          - const: samsung,exynos7-hsi2c
+      - items:
+          - enum:
+              - samsung,exynos850-hsi2c
+          - const: samsung,exynosautov9-hsi2c
       - const: samsung,exynos5-hsi2c    # Exynos5250 and Exynos5420
         deprecated: true
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
index b204e35e4f8d..1303502cf265 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
@@ -11,14 +11,20 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - samsung,s3c2410-i2c
-      - samsung,s3c2440-i2c
-        # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
-      - samsung,s3c2440-hdmiphy-i2c
-        # For s3c2440-like I2C used as a host to SATA PHY controller on an
-        # internal bus:
-      - samsung,exynos5-sata-phy-i2c
+    oneOf:
+      - enum:
+          - samsung,s3c2410-i2c
+          - samsung,s3c2440-i2c
+            # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
+          - samsung,s3c2440-hdmiphy-i2c
+            # For s3c2440-like I2C used as a host to SATA PHY controller on an
+            # internal bus:
+          - samsung,exynos5-sata-phy-i2c
+      - items:
+          - enum:
+              - samsung,exynos7885-i2c
+              - samsung,exynos850-i2c
+          - const: samsung,s3c2440-i2c
 
   '#address-cells':
     const: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index 94b75d9f66cd..1b31b87c1800 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -19,6 +19,7 @@ allOf:
               - st,stm32f7-i2c
               - st,stm32mp13-i2c
               - st,stm32mp15-i2c
+              - st,stm32mp25-i2c
     then:
       properties:
         i2c-scl-rising-time-ns:
@@ -41,6 +42,30 @@ allOf:
         clock-frequency:
           enum: [100000, 400000]
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32f4-i2c
+              - st,stm32f7-i2c
+              - st,stm32mp13-i2c
+              - st,stm32mp15-i2c
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+
+        interrupt-names:
+          minItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
+        interrupt-names:
+          maxItems: 1
+
 properties:
   compatible:
     enum:
@@ -48,6 +73,7 @@ properties:
       - st,stm32f7-i2c
       - st,stm32mp13-i2c
       - st,stm32mp15-i2c
+      - st,stm32mp25-i2c
 
   reg:
     maxItems: 1
@@ -56,11 +82,13 @@ properties:
     items:
       - description: interrupt ID for I2C event
       - description: interrupt ID for I2C error
+    minItems: 1
 
   interrupt-names:
     items:
       - const: event
       - const: error
+    minItems: 1
 
   resets:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
index ce7ba634643c..ddec9747436c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
@@ -4,36 +4,92 @@
 $id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices AD7091R5 4-Channel 12-Bit ADC
+title: Analog Devices AD7091R-2/-4/-5/-8 Multi-Channel 12-Bit ADCs
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
 
 description: |
-  Analog Devices AD7091R5 4-Channel 12-Bit ADC
+  Analog Devices AD7091R5 4-Channel 12-Bit ADC supporting I2C interface
   https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf
+  Analog Devices AD7091R-2/AD7091R-4/AD7091R-8 2-/4-/8-Channel 12-Bit ADCs
+  supporting SPI interface
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7091R-2_7091R-4_7091R-8.pdf
 
 properties:
   compatible:
     enum:
+      - adi,ad7091r2
+      - adi,ad7091r4
       - adi,ad7091r5
+      - adi,ad7091r8
 
   reg:
     maxItems: 1
 
+  vdd-supply:
+    description:
+      Provide VDD power to the sensor (VDD range is from 2.7V to 5.25V).
+
+  vdrive-supply:
+    description:
+      Determines the voltage level at which the interface logic will operate.
+      The V_drive voltage range is from 1.8V to 5.25V and must not exceed VDD by
+      more than 0.3V.
+
   vref-supply:
     description:
       Phandle to the vref power supply
 
-  interrupts:
+  convst-gpios:
+    description:
+      GPIO connected to the CONVST pin.
+      This logic input is used to initiate conversions on the analog
+      input channels.
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt for signaling when conversion results exceed the high limit for
+      ADC readings or fall below the low limit for them. Interrupt source must
+      be attached to ALERT/BUSY/GPO0 pin.
+    maxItems: 1
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  # AD7091R-2 does not have ALERT/BUSY/GPO pin
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091r2
+    then:
+      properties:
+        interrupts: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091r2
+              - adi,ad7091r4
+              - adi,ad7091r8
+    then:
+      required:
+        - convst-gpios
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -51,4 +107,22 @@ examples:
             interrupt-parent = <&gpio>;
         };
     };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7091r8";
+            reg = <0x0>;
+            spi-max-frequency = <1000000>;
+            vref-supply = <&adc_vref>;
+            convst-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+        };
+    };
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index 5fcc8dd012f1..be2616ff9af6 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -80,9 +80,9 @@ examples:
             compatible = "adi,ad7780";
             reg = <0>;
 
-            avdd-supply      = <&vdd_supply>;
-            powerdown-gpios  = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-            adi,gain-gpios   = <&gpio1  5 GPIO_ACTIVE_LOW>;
+            avdd-supply = <&vdd_supply>;
+            powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+            adi,gain-gpios = <&gpio1  5 GPIO_ACTIVE_LOW>;
             adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
         };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml
new file mode 100644
index 000000000000..4cba856e8d47
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max34408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX34408/MAX34409 current monitors with overcurrent control
+
+maintainers:
+  - Ivan Mikhaylov <fr0st61te@gmail.com>
+
+description: |
+  The MAX34408/MAX34409 are two- and four-channel current monitors that are
+  configured and monitored with a standard I2C/SMBus serial interface. Each
+  unidirectional current sensor offers precision high-side operation with a
+  low full-scale sense voltage. The devices automatically sequence through
+  two or four channels and collect the current-sense samples and average them
+  to reduce the effect of impulse noise. The raw ADC samples are compared to
+  user-programmable digital thresholds to indicate overcurrent conditions.
+  Overcurrent conditions trigger a hardware output to provide an immediate
+  indication to shut down any necessary external circuitry.
+
+  Specifications about the devices can be found at:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max34408
+      - maxim,max34409
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  powerdown-gpios:
+    description:
+      Shutdown Output. Open-drain output. This output transitions to high impedance
+      when any of the digital comparator thresholds are exceeded as long as the ENA
+      pin is high.
+    maxItems: 1
+
+  powerdown-status-gpios:
+    description:
+      SHTDN Enable Input. CMOS digital input. Connect to GND to clear the latch and
+      unconditionally deassert (force low) the SHTDN output and reset the shutdown
+      delay. Connect to VDD to enable normal latch operation of the SHTDN output.
+    maxItems: 1
+
+  vdd-supply: true
+
+patternProperties:
+  "^channel@[0-3]$":
+    $ref: adc.yaml
+    type: object
+    description:
+      Represents the internal channels of the ADC.
+
+    properties:
+      reg:
+        items:
+          - minimum: 0
+            maximum: 3
+
+      maxim,rsense-val-micro-ohms:
+        description:
+          Adjust the Rsense value to monitor higher or lower current levels for
+          input.
+        enum: [250, 500, 1000, 5000, 10000, 50000, 100000, 200000, 500000]
+        default: 1000
+
+    required:
+      - reg
+      - maxim,rsense-val-micro-ohms
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max34408
+    then:
+      patternProperties:
+        "^channel@[2-3]$": false
+        "^channel@[0-1]$":
+          properties:
+            reg:
+              maximum: 1
+    else:
+      patternProperties:
+        "^channel@[0-3]$":
+          properties:
+            reg:
+              maximum: 3
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1e {
+              compatible = "maxim,max34409";
+              reg = <0x1e>;
+              powerdown-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+              powerdown-status-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              channel@0 {
+                  reg = <0x0>;
+                  maxim,rsense-val-micro-ohms = <5000>;
+              };
+
+              channel@1 {
+                  reg = <0x1>;
+                  maxim,rsense-val-micro-ohms = <10000>;
+             };
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
index 73def67fbe01..5ed893ef5c18 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -25,7 +25,7 @@ properties:
       - const: qcom,spmi-iadc
 
   reg:
-    description: IADC base address and length in the SPMI PMIC register map
+    description: IADC base address in the SPMI PMIC register map
     maxItems: 1
 
   qcom,external-resistor-micro-ohms:
@@ -50,15 +50,17 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
-        pmic_iadc: adc@3600 {
+
+        adc@3600 {
             compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
             reg = <0x3600>;
             interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
             qcom,external-resistor-micro-ohms = <10000>;
-            #io-channel-cells  = <1>;
+            #io-channel-cells = <1>;
         };
     };
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
index b3a626389870..f39bc92c2b99 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
@@ -43,9 +43,9 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        pmic_rradc: adc@4500 {
+        adc@4500 {
             compatible = "qcom,pmi8998-rradc";
             reg = <0x4500>;
-            #io-channel-cells  = <1>;
+            #io-channel-cells = <1>;
         };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index ad7d6fc49de5..40fa0710f1f0 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -236,11 +236,11 @@ additionalProperties: false
 
 examples:
   - |
-    spmi {
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
-        /* VADC node */
-        pmic_vadc: adc@3100 {
+
+        adc@3100 {
             compatible = "qcom,spmi-vadc";
             reg = <0x3100>;
             interrupts = <0x0 0x31 0x0 0x1>;
@@ -281,9 +281,10 @@ examples:
     #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    spmi {
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
+
         adc@3100 {
             reg = <0x3100>;
             compatible = "qcom,spmi-adc7";
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index 582d0a03b814..4e40f6bed5db 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -11,18 +11,23 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - samsung,exynos-adc-v1                 # Exynos5250
-      - samsung,exynos-adc-v2
-      - samsung,exynos3250-adc
-      - samsung,exynos4212-adc                # Exynos4212 and Exynos4412
-      - samsung,exynos7-adc
-      - samsung,s3c2410-adc
-      - samsung,s3c2416-adc
-      - samsung,s3c2440-adc
-      - samsung,s3c2443-adc
-      - samsung,s3c6410-adc
-      - samsung,s5pv210-adc
+    oneOf:
+      - enum:
+          - samsung,exynos-adc-v1                 # Exynos5250
+          - samsung,exynos-adc-v2
+          - samsung,exynos3250-adc
+          - samsung,exynos4212-adc                # Exynos4212 and Exynos4412
+          - samsung,exynos7-adc
+          - samsung,s3c2410-adc
+          - samsung,s3c2416-adc
+          - samsung,s3c2440-adc
+          - samsung,s3c2443-adc
+          - samsung,s3c6410-adc
+          - samsung,s5pv210-adc
+      - items:
+          - enum:
+              - samsung,exynos5433-adc
+          - const: samsung,exynos7-adc
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
index 720c16a108d4..f94057d8f605 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
@@ -67,19 +67,4 @@ required:
   - compatible
   - "#io-channel-cells"
 
-examples:
-  - |
-    #include <dt-bindings/clock/mt8183-clk.h>
-    pmic {
-        compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
-        adc {
-            compatible = "ti,palmas-gpadc";
-            interrupts = <18 0>,
-                         <16 0>,
-                         <17 0>;
-            #io-channel-cells = <1>;
-            ti,channel0-current-microamp = <5>;
-            ti,channel3-current-microamp = <10>;
-        };
-    };
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
index 2ee6080deac7..67de9d4e3a1d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -12,6 +12,9 @@ maintainers:
 description: |
   Digital Step Attenuator IIO devices with gpio interface.
   Offer various frequency and attenuation ranges.
+  ADRF5750 2 dB LSB, 4-Bit, Silicon Digital Attenuator, 10 MHz to 60 GHz
+    https://www.analog.com/media/en/technical-documentation/data-sheets/adrf5740.pdf
+
   HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
     https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
 
@@ -22,6 +25,7 @@ description: |
 properties:
   compatible:
     enum:
+      - adi,adrf5740
       - adi,hmc425a
       - adi,hmc540s
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml
new file mode 100644
index 000000000000..35e7b094e878
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/aosong,ags02ma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aosong AGS02MA VOC Sensor
+
+description: |
+  AGS02MA is an TVOC (Total Volatile Organic Compounds) i2c sensor with default
+  address of 0x1a.
+
+  Datasheet:
+    https://asairsensors.com/wp-content/uploads/2021/09/AGS02MA.pdf
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - aosong,ags02ma
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        voc-sensor@1a {
+            compatible = "aosong,ags02ma";
+            reg = <0x1a>;
+            vdd-supply = <&vdd_regulator>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
index 3a84739736f6..c81285d84db7 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
@@ -26,6 +26,11 @@ properties:
   vdd-supply: true
   vss-supply: true
 
+  adi,rbuf-gain2-en:
+    description: Specify to allow an external amplifier to be connected in a
+      gain of two configuration.
+    type: boolean
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml
new file mode 100644
index 000000000000..0dc577c33918
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4821.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP4821 and similar DACs
+
+description: |
+  Supports MCP48x1 (single channel) and MCP48x2 (dual channel) series of DACs.
+  Device supports simplex communication over SPI in Mode 0 and Mode 3.
+
+  +---------+--------------+-------------+
+  | Device  |  Resolution  |   Channels  |
+  |---------|--------------|-------------|
+  | MCP4801 |     8-bit    |      1      |
+  | MCP4802 |     8-bit    |      2      |
+  | MCP4811 |    10-bit    |      1      |
+  | MCP4812 |    10-bit    |      2      |
+  | MCP4821 |    12-bit    |      1      |
+  | MCP4822 |    12-bit    |      2      |
+  +---------+--------------+-------------+
+
+  Datasheet:
+    MCP48x1: https://ww1.microchip.com/downloads/en/DeviceDoc/22244B.pdf
+    MCP48x2: https://ww1.microchip.com/downloads/en/DeviceDoc/20002249B.pdf
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp4801
+      - microchip,mcp4802
+      - microchip,mcp4811
+      - microchip,mcp4812
+      - microchip,mcp4821
+      - microchip,mcp4822
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  ldac-gpios:
+    description: |
+      Active Low LDAC (Latch DAC Input) pin used to update the DAC output.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: |
+      Active Low SHDN pin used to enter the shutdown mode.
+    maxItems: 1
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "microchip,mcp4821";
+            reg = <0>;
+            vdd-supply = <&vdd_regulator>;
+            ldac-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+            powerdown-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+            spi-cpha;
+            spi-cpol;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
new file mode 100644
index 000000000000..7f6d0f9edc75
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/ti,hdc3020.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDC3020/HDC3021/HDC3022 humidity and temperature iio sensors
+
+maintainers:
+  - Li peiyu <579lpy@gmail.com>
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description:
+  https://www.ti.com/lit/ds/symlink/hdc3020.pdf
+
+  The HDC302x is an integrated capacitive based relative humidity (RH)
+  and temperature sensor.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,hdc3021
+              - ti,hdc3022
+          - const: ti,hdc3020
+      - const: ti,hdc3020
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        humidity-sensor@47 {
+            compatible = "ti,hdc3021", "ti,hdc3020";
+            reg = <0x47>;
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
index 4e43c80e5119..4cacc9948726 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -25,6 +25,10 @@ properties:
 
   spi-cpol: true
 
+  spi-cs-inactive-delay-ns:
+    minimum: 16000
+    default: 16000
+
   interrupts:
     maxItems: 1
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
index c73533c54588..9b7ad609f7db 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
@@ -47,6 +47,10 @@ properties:
   spi-max-frequency:
     maximum: 2000000
 
+  spi-cs-inactive-delay-ns:
+    minimum: 16000
+    default: 16000
+
   interrupts:
     maxItems: 1
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml
new file mode 100644
index 000000000000..64ef26e19669
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bmi323.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI323 6-Axis IMU
+
+maintainers:
+  - Jagath Jog J <jagathjog1996@gmail.com>
+
+description:
+  BMI323 is a 6-axis inertial measurement unit that supports acceleration and
+  gyroscopic measurements with hardware fifo buffering. Sensor also provides
+  events information such as motion, steps, orientation, single and double
+  tap detection.
+
+properties:
+  compatible:
+    const: bosch,bmi323
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    description:
+      set if the specified interrupt pin should be configured as
+      open drain. If not set, defaults to push-pull.
+
+  mount-matrix:
+    description:
+      an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example for I2C
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@68 {
+            compatible = "bosch,bmi323";
+            reg = <0x68>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/light/liteon,ltr390.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/light/liteon,ltr390.yaml
new file mode 100644
index 000000000000..5d98ef2af74d
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/light/liteon,ltr390.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltr390.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lite-On LTR390 ALS and UV Sensor
+
+description: |
+  The Lite-On LTR390 is an ALS (Ambient Light Sensor) and a UV sensor in a
+  single package with i2c address of 0x53.
+
+  Datasheet:
+    https://optoelectronics.liteon.com/upload/download/DS86-2015-0004/LTR-390UV_Final_%20DS_V1%201.pdf
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - liteon,ltr390
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Level interrupt pin with open drain output.
+      The sensor pulls this pin low when the measured reading is greater than
+      some configured threshold.
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@53 {
+            compatible = "liteon,ltr390";
+            reg = <0x53>;
+            interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&vdd_regulator>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml
new file mode 100644
index 000000000000..abee04cd126e
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,veml6075.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Vishay VEML6075 UVA and UVB sensor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+  compatible:
+    const: vishay,veml6075
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        uv-sensor@10 {
+            compatible = "vishay,veml6075";
+            reg = <0x10>;
+            vdd-supply = <&vdd_reg>;
+        };
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
new file mode 100644
index 000000000000..65a24ed67b3c
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/honeywell,hsc030pa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell TruStability HSC and SSC pressure sensor series
+
+description: |
+  support for Honeywell TruStability HSC and SSC digital pressure sensor
+  series.
+
+  These sensors have either an I2C, an SPI or an analog interface. Only the
+  digital versions are supported by this driver.
+
+  There are 118 models with different pressure ranges available in each family.
+  The vendor calls them "HSC series" and "SSC series". All of them have an
+  identical programming model but differ in pressure range, unit and transfer
+  function.
+
+  To support different models one needs to specify the pressure range as well
+  as the transfer function. Pressure range can either be provided via
+  pressure-triplet (directly extracted from the part number) or in case it's
+  a custom chip via numerical range limits converted to pascals.
+
+  The transfer function defines the ranges of raw conversion values delivered
+  by the sensor. pmin-pascal and pmax-pascal corespond to the minimum and
+  maximum pressure that can be measured.
+
+  Please note that in case of an SPI-based sensor, the clock signal should not
+  exceed 800kHz and the MOSI signal is not required.
+
+  Specifications about the devices can be found at:
+  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf
+  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf
+
+maintainers:
+  - Petre Rodan <petre.rodan@subdimension.ro>
+
+properties:
+  compatible:
+    const: honeywell,hsc030pa
+
+  reg:
+    maxItems: 1
+
+  honeywell,transfer-function:
+    description: |
+      Transfer function which defines the range of valid values delivered by
+      the sensor.
+      0 - A, 10% to 90% of 2^14
+      1 - B, 5% to 95% of 2^14
+      2 - C, 5% to 85% of 2^14
+      3 - F, 4% to 94% of 2^14
+    enum: [0, 1, 2, 3]
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  honeywell,pressure-triplet:
+    description: |
+      Case-sensitive five character string that defines pressure range, unit
+      and type as part of the device nomenclature. In the unlikely case of a
+      custom chip, set to "NA" and provide pmin-pascal and pmax-pascal.
+    enum: [001BA, 1.6BA, 2.5BA, 004BA, 006BA, 010BA, 1.6MD, 2.5MD, 004MD,
+           006MD, 010MD, 016MD, 025MD, 040MD, 060MD, 100MD, 160MD, 250MD,
+           400MD, 600MD, 001BD, 1.6BD, 2.5BD, 004BD, 2.5MG, 004MG, 006MG,
+           010MG, 016MG, 025MG, 040MG, 060MG, 100MG, 160MG, 250MG, 400MG,
+           600MG, 001BG, 1.6BG, 2.5BG, 004BG, 006BG, 010BG, 100KA, 160KA,
+           250KA, 400KA, 600KA, 001GA, 160LD, 250LD, 400LD, 600LD, 001KD,
+           1.6KD, 2.5KD, 004KD, 006KD, 010KD, 016KD, 025KD, 040KD, 060KD,
+           100KD, 160KD, 250KD, 400KD, 250LG, 400LG, 600LG, 001KG, 1.6KG,
+           2.5KG, 004KG, 006KG, 010KG, 016KG, 025KG, 040KG, 060KG, 100KG,
+           160KG, 250KG, 400KG, 600KG, 001GG, 015PA, 030PA, 060PA, 100PA,
+           150PA, 0.5ND, 001ND, 002ND, 004ND, 005ND, 010ND, 020ND, 030ND,
+           001PD, 005PD, 015PD, 030PD, 060PD, 001NG, 002NG, 004NG, 005NG,
+           010NG, 020NG, 030NG, 001PG, 005PG, 015PG, 030PG, 060PG, 100PG,
+           150PG, NA]
+    $ref: /schemas/types.yaml#/definitions/string
+
+  honeywell,pmin-pascal:
+    description: |
+      Minimum pressure value the sensor can measure in pascal.
+      To be specified only if honeywell,pressure-triplet is set to "NA".
+
+  honeywell,pmax-pascal:
+    description: |
+      Maximum pressure value the sensor can measure in pascal.
+      To be specified only if honeywell,pressure-triplet is set to "NA".
+
+  vdd-supply:
+    description:
+      Provide VDD power to the sensor (either 3.3V or 5V depending on the chip)
+
+  spi-max-frequency:
+    maximum: 800000
+
+required:
+  - compatible
+  - reg
+  - honeywell,transfer-function
+  - honeywell,pressure-triplet
+
+additionalProperties: false
+
+dependentSchemas:
+  honeywell,pmin-pascal:
+    properties:
+      honeywell,pressure-triplet:
+        const: NA
+  honeywell,pmax-pascal:
+    properties:
+      honeywell,pressure-triplet:
+        const: NA
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@28 {
+            compatible = "honeywell,hsc030pa";
+            reg = <0x28>;
+            honeywell,transfer-function = <0>;
+            honeywell,pressure-triplet = "030PA";
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@0 {
+            compatible = "honeywell,hsc030pa";
+            reg = <0>;
+            spi-max-frequency = <800000>;
+            honeywell,transfer-function = <0>;
+            honeywell,pressure-triplet = "NA";
+            honeywell,pmin-pascal = <0>;
+            honeywell,pmax-pascal = <200000>;
+        };
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
index b31f8120f14e..d9e903fbfd99 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
@@ -53,12 +53,10 @@ properties:
   honeywell,pmin-pascal:
     description:
       Minimum pressure value the sensor can measure in pascal.
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   honeywell,pmax-pascal:
     description:
       Maximum pressure value the sensor can measure in pascal.
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   honeywell,transfer-function:
     description: |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
index 4a55e7f25ae7..03bb5d4fa8b5 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90632.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Melexis MLX90632 contactless Infra Red temperature sensor
+title: Melexis MLX90632 and MLX90635 contactless Infra Red temperature sensor
 
 maintainers:
   - Crt Mori <cmo@melexis.com>
@@ -27,9 +27,24 @@ description: |
   Since measured object emissivity effects Infra Red energy emitted,
   emissivity should be set before requesting the object temperature.
 
+  https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90635
+
+  MLX90635 is most suitable for consumer applications where
+  measured object temperature is in range between -20 to 100 degrees
+  Celsius with relative error of measurement 2 degree Celsius in
+  object temperature range for industrial applications, while just 0.2
+  degree Celsius for human body measurement applications. Since it can
+  operate and measure ambient temperature in range of -20 to 85 degrees
+  Celsius it is suitable also for outdoor use.
+
+  Since measured object emissivity effects Infra Red energy emitted,
+  emissivity should be set before requesting the object temperature.
+
 properties:
   compatible:
-    const: melexis,mlx90632
+    enum:
+      - melexis,mlx90632
+      - melexis,mlx90635
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iio/temperature/microchip,mcp9600.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/temperature/microchip,mcp9600.yaml
new file mode 100644
index 000000000000..d2cafa38a544
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/temperature/microchip,mcp9600.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/microchip,mcp9600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP9600 thermocouple EMF converter
+
+maintainers:
+  - Andrew Hepp <andrew.hepp@ahepp.dev>
+
+description:
+  https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf
+
+properties:
+  compatible:
+    const: microchip,mcp9600
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 6
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 6
+    items:
+      enum:
+        - open-circuit
+        - short-circuit
+        - alert1
+        - alert2
+        - alert3
+        - alert4
+
+  thermocouple-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Type of thermocouple (THERMOCOUPLE_TYPE_K if omitted).
+      Use defines in dt-bindings/iio/temperature/thermocouple.h.
+      Supported types are B, E, J, K, N, R, S, T.
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/temperature/thermocouple.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@60 {
+            compatible = "microchip,mcp9600";
+            reg = <0x60>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "open-circuit";
+            thermocouple-type = <THERMOCOUPLE_TYPE_K>;
+            vdd-supply = <&vdd>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/index.rst linux-libre-6.8-gnu/Documentation/devicetree/bindings/index.rst
index d9002a3a0abb..cc1fbdc05657 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/index.rst
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/index.rst
@@ -4,6 +4,7 @@
    :maxdepth: 1
 
    ABI
+   dts-coding-style
    writing-bindings
    writing-schema
    submitting-patches
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml
new file mode 100644
index 000000000000..5e86f6de6978
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adafruit,seesaw-gamepad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Adafruit Mini I2C Gamepad with seesaw
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+description: |
+  Adafruit Mini I2C Gamepad
+
+    +-----------------------------+
+    |   ___                       |
+    |  /   \               (X)    |
+    | |  S  |  __   __  (Y)   (A) |
+    |  \___/  |ST| |SE|    (B)    |
+    |                             |
+    +-----------------------------+
+
+  S -> 10-bit precision bidirectional analog joystick
+  ST -> Start
+  SE -> Select
+  X, A, B, Y -> Digital action buttons
+
+  Datasheet: https://cdn-learn.adafruit.com/downloads/pdf/gamepad-qt.pdf
+  Product page: https://www.adafruit.com/product/5743
+  Arduino Driver: https://github.com/adafruit/Adafruit_Seesaw
+
+properties:
+  compatible:
+    const: adafruit,seesaw-gamepad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      The gamepad's IRQ pin triggers a rising edge if interrupts are enabled.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        joystick@50 {
+            compatible = "adafruit,seesaw-gamepad";
+            interrupts = <18 IRQ_TYPE_EDGE_RISING>;
+            reg = <0x50>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/elan,ekth6915.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
index 3e2d216c6432..dc4ac41f2441 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
@@ -18,8 +18,9 @@ allOf:
 
 properties:
   compatible:
-    items:
-      - const: elan,ekth6915
+    enum:
+      - elan,ekth6915
+      - ilitek,ili2901
 
   reg:
     const: 0x10
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/gpio-keys.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/gpio-keys.yaml
index 159cd9d9fe57..cc78c2152921 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -31,7 +31,23 @@ patternProperties:
         maxItems: 1
 
       interrupts:
-        maxItems: 1
+        oneOf:
+          - items:
+              - description: Optional key interrupt or wakeup interrupt
+          - items:
+              - description: Key interrupt
+              - description: Wakeup interrupt
+
+      interrupt-names:
+        description:
+          Optional interrupt names, can be used to specify a separate dedicated
+          wake-up interrupt in addition to the gpio irq
+        oneOf:
+          - items:
+              - enum: [ irq, wakeup ]
+          - items:
+              - const: irq
+              - const: wakeup
 
       label:
         description: Descriptive name of the key.
@@ -97,6 +113,20 @@ patternProperties:
       - required:
           - gpios
 
+    allOf:
+      - if:
+          properties:
+            interrupts:
+              minItems: 2
+          required:
+            - interrupts
+        then:
+          properties:
+            interrupt-names:
+              minItems: 2
+          required:
+            - interrupt-names
+
     dependencies:
       wakeup-event-action: [ wakeup-source ]
       linux,input-value: [ gpios ]
@@ -137,6 +167,15 @@ examples:
             linux,code = <108>;
             interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
         };
+
+        key-wakeup {
+            label = "GPIO Key WAKEUP";
+            linux,code = <143>;
+            interrupts-extended = <&intc 2 IRQ_TYPE_EDGE_FALLING>,
+                                  <&intc_wakeup 0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "irq", "wakeup";
+            wakeup-source;
+        };
     };
 
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/gpio-mouse.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/gpio-mouse.txt
deleted file mode 100644
index 519510a11af9..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/gpio-mouse.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Device-Tree bindings for GPIO attached mice
-
-This simply uses standard GPIO handles to define a simple mouse connected
-to 5-7 GPIO lines.
-
-Required properties:
-	- compatible: must be "gpio-mouse"
-	- scan-interval-ms: The scanning interval in milliseconds
-	- up-gpios: GPIO line phandle to the line indicating "up"
-	- down-gpios: GPIO line phandle to the line indicating "down"
-	- left-gpios: GPIO line phandle to the line indicating "left"
-	- right-gpios: GPIO line phandle to the line indicating "right"
-
-Optional properties:
-	- button-left-gpios: GPIO line handle to the left mouse button
-	- button-middle-gpios: GPIO line handle to the middle mouse button
-	- button-right-gpios: GPIO line handle to the right mouse button
-Example:
-
-#include <dt-bindings/gpio/gpio.h>
-
-gpio-mouse {
-	compatible = "gpio-mouse";
-	scan-interval-ms = <50>;
-	up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-	down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-	left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-	right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-	button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-	button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-	button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/gpio-mouse.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/gpio-mouse.yaml
new file mode 100644
index 000000000000..3928ec6aff1d
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/gpio-mouse.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-mouse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO attached mouse
+
+description: |
+  This simply uses standard GPIO handles to define a simple mouse connected
+  to 5-7 GPIO lines.
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+  compatible:
+    const: gpio-mouse
+
+  scan-interval-ms:
+    maxItems: 1
+
+  up-gpios:
+    maxItems: 1
+
+  down-gpios:
+    maxItems: 1
+
+  left-gpios:
+    maxItems: 1
+
+  right-gpios:
+    maxItems: 1
+
+  button-left-gpios:
+    maxItems: 1
+
+  button-middle-gpios:
+    maxItems: 1
+
+  button-right-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - scan-interval-ms
+  - up-gpios
+  - down-gpios
+  - left-gpios
+  - right-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpio-mouse {
+        compatible = "gpio-mouse";
+        scan-interval-ms = <50>;
+        up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+        down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+        left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+        right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+        button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+        button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+        button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/iqs269a.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/iqs269a.yaml
index 3c430d38594f..2c3f693b8982 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/iqs269a.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/iqs269a.yaml
@@ -9,6 +9,9 @@ title: Azoteq IQS269A Capacitive Touch Controller
 maintainers:
   - Jeff LaBundy <jeff@labundy.com>
 
+allOf:
+  - $ref: input.yaml#
+
 description: |
   The Azoteq IQS269A is an 8-channel capacitive touch controller that features
   additional Hall-effect and inductive sensing capabilities.
@@ -17,7 +20,10 @@ description: |
 
 properties:
   compatible:
-    const: azoteq,iqs269a
+    enum:
+      - azoteq,iqs269a
+      - azoteq,iqs269a-00
+      - azoteq,iqs269a-d0
 
   reg:
     maxItems: 1
@@ -204,6 +210,73 @@ properties:
     default: 1
     description: Specifies the slider coordinate filter strength.
 
+  azoteq,touch-hold-ms:
+    multipleOf: 256
+    minimum: 256
+    maximum: 65280
+    default: 5120
+    description:
+      Specifies the length of time (in ms) for which the channel selected by
+      'azoteq,gpio3-select' must be held in a state of touch in order for an
+      approximately 60-ms pulse to be asserted on the GPIO4 pin.
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+    description: |
+      Specifies the numeric keycodes associated with each available gesture in
+      the following order (enter 0 for unused gestures):
+      0: Slider 0 tap
+      1: Slider 0 hold
+      2: Slider 0 positive flick or swipe
+      3: Slider 0 negative flick or swipe
+      4: Slider 1 tap
+      5: Slider 1 hold
+      6: Slider 1 positive flick or swipe
+      7: Slider 1 negative flick or swipe
+
+  azoteq,gesture-swipe:
+    type: boolean
+    description:
+      Directs the device to interpret axial gestures as a swipe (finger remains
+      on slider) instead of a flick (finger leaves slider).
+
+  azoteq,timeout-tap-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 400
+    description:
+      Specifies the length of time (in ms) within which a slider touch must be
+      released in order to be interpreted as a tap. Default and maximum values
+      as well as step size are reduced by a factor of 4 with device version 2.
+
+  azoteq,timeout-swipe-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 2000
+    description:
+      Specifies the length of time (in ms) within which an axial gesture must be
+      completed in order to be interpreted as a flick or swipe. Default and max-
+      imum values as well as step size are reduced by a factor of 4 with device
+      version 2.
+
+  azoteq,thresh-swipe:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+    default: 128
+    description:
+      Specifies the number of points across which an axial gesture must travel
+      in order to be interpreted as a flick or swipe.
+
+dependencies:
+  azoteq,gesture-swipe: ["linux,keycodes"]
+  azoteq,timeout-tap-ms: ["linux,keycodes"]
+  azoteq,timeout-swipe-ms: ["linux,keycodes"]
+  azoteq,thresh-swipe: ["linux,keycodes"]
+
 patternProperties:
   "^channel@[0-7]$":
     type: object
@@ -454,6 +527,21 @@ patternProperties:
 
     additionalProperties: false
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - azoteq,iqs269a-d0
+then:
+  patternProperties:
+    "^channel@[0-7]$":
+      properties:
+        azoteq,slider1-select: false
+else:
+  properties:
+    azoteq,touch-hold-ms: false
+
 required:
   - compatible
   - reg
@@ -484,6 +572,14 @@ examples:
                     azoteq,hall-enable;
                     azoteq,suspend-mode = <2>;
 
+                    linux,keycodes = <KEY_PLAYPAUSE>,
+                                     <KEY_STOPCD>,
+                                     <KEY_NEXTSONG>,
+                                     <KEY_PREVIOUSSONG>;
+
+                    azoteq,timeout-tap-ms = <400>;
+                    azoteq,timeout-swipe-ms = <800>;
+
                     channel@0 {
                             reg = <0x0>;
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
index e34c9e78d38d..70567d92c746 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -90,26 +90,4 @@ required:
 
 unevaluatedProperties: false
 
-examples:
-  - |
-    #include <dt-bindings/input/input.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-    pmic {
-        compatible = "mediatek,mt6397";
-
-        keys {
-          compatible = "mediatek,mt6397-keys";
-          mediatek,long-press-mode = <1>;
-          power-off-time-sec = <0>;
-
-          key-power {
-            linux,keycodes = <KEY_POWER>;
-            wakeup-source;
-          };
-
-          key-home {
-            linux,keycodes = <KEY_VOLUMEDOWN>;
-          };
-        };
-    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
index 5b5d4f7d3482..7ade03f1b32b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
@@ -45,13 +45,13 @@ properties:
       Enables the Linux input system's autorepeat feature on the input device.
 
   linux,keycodes:
-    minItems: 6
-    maxItems: 6
+    minItems: 3
+    maxItems: 8
     description: |
       Specifies an array of numeric keycode values to
       be used for the channels. If this property is
       omitted, KEY_A, KEY_B, etc are used as defaults.
-      The array must have exactly six entries.
+      The number of entries must correspond to the number of channels.
 
   microchip,sensor-gain:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -70,6 +70,59 @@ properties:
       open drain. This property allows using the active
       high push-pull output.
 
+  microchip,sensitivity-delta-sense:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+    description:
+      Controls the sensitivity multiplier of a touch detection.
+      Higher value means more sensitive settings.
+      At the more sensitive settings, touches are detected for a smaller delta
+      capacitance corresponding to a "lighter" touch.
+
+  microchip,signal-guard:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 8
+    items:
+      enum: [0, 1]
+    description: |
+      0 - off
+      1 - on
+      The signal guard isolates the signal from virtual grounds.
+      If enabled then the behavior of the channel is changed to signal guard.
+      The number of entries must correspond to the number of channels.
+
+  microchip,input-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 8
+    items:
+      minimum: 0
+      maximum: 127
+    description:
+      Specifies the delta threshold that is used to determine if a touch has
+      been detected. A higher value means a larger difference in capacitance
+      is required for a touch to be registered, making the touch sensor less
+      sensitive.
+      The number of entries must correspond to the number of channels.
+
+  microchip,calib-sensitivity:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 8
+    items:
+      enum: [1, 2, 4]
+    description: |
+      Specifies an array of numeric values that controls the gain
+      used by the calibration routine to enable sensor inputs
+      to be more sensitive for proximity detection.
+      Gain is based on touch pad capacitance range
+      1 - 5-50pF
+      2 - 0-25pF
+      4 - 0-12.5pF
+      The number of entries must correspond to the number of channels.
+
 patternProperties:
   "^led@[0-7]$":
     type: object
@@ -99,10 +152,29 @@ allOf:
           contains:
             enum:
               - microchip,cap1106
+              - microchip,cap1203
+              - microchip,cap1206
+              - microchip,cap1293
+              - microchip,cap1298
     then:
       patternProperties:
         "^led@[0-7]$": false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,cap1106
+              - microchip,cap1126
+              - microchip,cap1188
+              - microchip,cap1203
+              - microchip,cap1206
+    then:
+      properties:
+        microchip,signal-guard: false
+        microchip,calib-sensitivity: false
+
 required:
   - compatible
   - interrupts
@@ -122,6 +194,8 @@ examples:
         reg = <0x28>;
         autorepeat;
         microchip,sensor-gain = <2>;
+        microchip,sensitivity-delta-sense = <16>;
+        microchip,input-threshold = <21>, <18>, <46>, <46>, <46>, <21>;
 
         linux,keycodes = <103>,	/* KEY_UP */
                          <106>,	/* KEY_RIGHT */
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
index a401a0bfcbec..4c8d303ff93c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
@@ -28,21 +28,4 @@ required:
 
 additionalProperties: false
 
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    sc2731_pmic: pmic@0 {
-      compatible = "sprd,sc2731";
-      reg = <0 0>;
-      spi-max-frequency = <26000000>;
-      interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-      interrupt-controller;
-      #interrupt-cells = <2>;
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      vibrator@eb4 {
-        compatible = "sprd,sc2731-vibrator";
-        reg = <0xeb4>;
-      };
-    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/ti,drv2665.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/ti,drv2665.txt
deleted file mode 100644
index 1ba97ac04305..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/ti,drv2665.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Texas Instruments - drv2665 Haptics driver
-
-Required properties:
-	- compatible - "ti,drv2665" - DRV2665
-	- reg -  I2C slave address
-	- vbat-supply - Required supply regulator
-
-Example:
-
-haptics: haptics@59 {
-	compatible = "ti,drv2665";
-	reg = <0x59>;
-	vbat-supply = <&vbat>;
-};
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2665
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/ti,drv2667.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/ti,drv2667.txt
deleted file mode 100644
index 996382cf994a..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/ti,drv2667.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Texas Instruments - drv2667 Haptics driver
-
-Required properties:
-	- compatible - "ti,drv2667" - DRV2667
-	- reg -  I2C slave address
-	- vbat-supply - Required supply regulator
-
-Example:
-
-haptics: haptics@59 {
-	compatible = "ti,drv2667";
-	reg = <0x59>;
-	vbat-supply = <&vbat>;
-};
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2667
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/ti,drv266x.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/ti,drv266x.yaml
new file mode 100644
index 000000000000..da1818824373
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/ti,drv266x.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,drv266x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - drv266x Haptics driver
+
+description: |
+  Product Page:
+    http://www.ti.com/product/drv2665
+    http://www.ti.com/product/drv2667
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,drv2665
+      - ti,drv2667
+
+  reg:
+    maxItems: 1
+
+  vbat-supply:
+    description: Required supply regulator
+
+required:
+  - compatible
+  - reg
+  - vbat-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        haptics@59 {
+            compatible = "ti,drv2667";
+            reg = <0x59>;
+            vbat-supply = <&vbat>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml
new file mode 100644
index 000000000000..c2ee89b76ea1
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/neonode,zforce.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Neonode infrared touchscreen controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: neonode,zforce
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  irq-gpios:
+    maxItems: 1
+
+  x-size:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  y-size:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@50 {
+            compatible = "neonode,zforce";
+            reg = <0x50>;
+            interrupts = <2 0>;
+            vdd-supply = <&reg_zforce_vdd>;
+
+            reset-gpios = <&gpio5 9 0>; /* RST */
+            irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
+
+            touchscreen-min-x = <0>;
+            touchscreen-size-x = <800>;
+            touchscreen-min-y = <0>;
+            touchscreen-size-y = <600>;
+        };
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
deleted file mode 100644
index 6805d10d226d..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Samsung S6SY761 touchscreen controller
-
-Required properties:
-- compatible		: must be "samsung,s6sy761"
-- reg			: I2C slave address, (e.g. 0x48)
-- interrupts		: interrupt specification
-- avdd-supply		: analogic power supply
-- vdd-supply		: power supply
-
-Optional properties:
-- touchscreen-size-x	: see touchscreen.txt. This property is embedded in the
-			  device. If defined it forces a different x resolution.
-- touchscreen-size-y	: see touchscreen.txt. This property is embedded in the
-			  device. If defined it forces a different y resolution.
-
-Example:
-
-i2c@00000000 {
-
-	/* ... */
-
-	touchscreen@48 {
-		compatible = "samsung,s6sy761";
-		reg = <0x48>;
-		interrupt-parent = <&gpa1>;
-		interrupts = <1 IRQ_TYPE_NONE>;
-		avdd-supply = <&ldo30_reg>;
-		vdd-supply = <&ldo31_reg>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-	};
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml
new file mode 100644
index 000000000000..1ffd17af3c53
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/samsung,s6sy761.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6SY761 touchscreen controller
+
+maintainers:
+  - Andi Shyti <andi.shyti@kernel.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6sy761
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  avdd-supply: true
+  vdd-supply: true
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - vdd-supply
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@48 {
+            compatible = "samsung,s6sy761";
+            reg = <0x48>;
+            interrupt-parent = <&gpa1>;
+            interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+            avdd-supply = <&ldo30_reg>;
+            vdd-supply = <&ldo31_reg>;
+            touchscreen-size-x = <4096>;
+            touchscreen-size-y = <4096>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
deleted file mode 100644
index e3c27c4fd9c8..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* Neonode infrared touchscreen controller
-
-Required properties:
-- compatible: must be "neonode,zforce"
-- reg: I2C address of the chip
-- interrupts: interrupt to which the chip is connected
-- reset-gpios: reset gpio the chip is connected to
-- x-size: horizontal resolution of touchscreen
-- y-size: vertical resolution of touchscreen
-
-Optional properties:
-- irq-gpios : interrupt gpio the chip is connected to
-- vdd-supply: Regulator controlling the controller supply
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		zforce_ts@50 {
-			compatible = "neonode,zforce";
-			reg = <0x50>;
-			interrupts = <2 0>;
-			vdd-supply = <&reg_zforce_vdd>;
-
-			reset-gpios = <&gpio5 9 0>; /* RST */
-			irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
-
-			x-size = <800>;
-			y-size = <600>;
-		};
-
-		/* ... */
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
index 73f809cdb783..05067e197abe 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
@@ -25,13 +25,16 @@ properties:
       - const: qcom,msm8998-bwmon       # BWMON v4
       - items:
           - enum:
+              - qcom,qcm2290-cpu-bwmon
               - qcom,sc7180-cpu-bwmon
               - qcom,sc7280-cpu-bwmon
               - qcom,sc8280xp-cpu-bwmon
               - qcom,sdm845-cpu-bwmon
+              - qcom,sm6115-cpu-bwmon
               - qcom,sm6350-llcc-bwmon
               - qcom,sm8250-cpu-bwmon
               - qcom,sm8550-cpu-bwmon
+              - qcom,sm8650-cpu-bwmon
           - const: qcom,sdm845-bwmon    # BWMON v4, unified register space
       - items:
           - enum:
@@ -40,6 +43,7 @@ properties:
               - qcom,sm6350-cpu-bwmon
               - qcom,sm8250-llcc-bwmon
               - qcom,sm8550-llcc-bwmon
+              - qcom,sm8650-llcc-bwmon
           - const: qcom,sc7280-llcc-bwmon
       - const: qcom,sc7280-llcc-bwmon   # BWMON v5
       - const: qcom,sdm845-llcc-bwmon   # BWMON v5
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/interconnect/qcom,sm6115.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/interconnect/qcom,sm6115.yaml
new file mode 100644
index 000000000000..14b1a0b08e73
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/interconnect/qcom,sm6115.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm6115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6115 Network-On-Chip interconnect
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  The Qualcomm SM6115 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-bimc
+      - qcom,sm6115-cnoc
+      - qcom,sm6115-snoc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[a-z0-9]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    $ref: qcom,rpm-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sm6115-clk-virt
+          - qcom,sm6115-mmrt-virt
+          - qcom,sm6115-mmnrt-virt
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+  - if:
+      properties:
+        compatible:
+          const: qcom,sm6115-cnoc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: USB-NoC AXI clock
+
+        clock-names:
+          items:
+            - const: usb_axi
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,sm6115-snoc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: CPU-NoC AXI clock.
+            - description: UFS-NoC AXI clock.
+            - description: USB-NoC AXI clock.
+            - description: IPA clock.
+
+        clock-names:
+          items:
+            - const: cpu_axi
+            - const: ufs_axi
+            - const: usb_axi
+            - const: ipa
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm6115-bimc
+            - qcom,sm6115-clk-virt
+            - qcom,sm6115-mmrt-virt
+            - qcom,sm6115-mmnrt-virt
+
+    then:
+      properties:
+        clocks: false
+        clock-names: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    snoc: interconnect@1880000 {
+        compatible = "qcom,sm6115-snoc";
+        reg = <0x01880000 0x60200>;
+        clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>,
+                 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+                 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+                 <&rpmcc RPM_SMD_IPA_CLK>;
+        clock-names = "cpu_axi",
+                      "ufs_axi",
+                      "usb_axi",
+                      "ipa";
+        #interconnect-cells = <1>;
+
+        qup_virt: interconnect-clk {
+            compatible = "qcom,sm6115-clk-virt";
+            #interconnect-cells = <1>;
+        };
+
+        mmnrt_virt: interconnect-mmnrt {
+            compatible = "qcom,sm6115-mmnrt-virt";
+            #interconnect-cells = <1>;
+        };
+
+        mmrt_virt: interconnect-mmrt {
+            compatible = "qcom,sm6115-mmrt-virt";
+            #interconnect-cells = <1>;
+        };
+    };
+
+    cnoc: interconnect@1900000 {
+        compatible = "qcom,sm6115-cnoc";
+        reg = <0x01900000 0x8200>;
+        #interconnect-cells = <1>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml
new file mode 100644
index 000000000000..f9322de7cd61
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm8650-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM8650
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also:: include/dt-bindings/interconnect/qcom,sm8650-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8650-aggre1-noc
+      - qcom,sm8650-aggre2-noc
+      - qcom,sm8650-clk-virt
+      - qcom,sm8650-cnoc-main
+      - qcom,sm8650-config-noc
+      - qcom,sm8650-gem-noc
+      - qcom,sm8650-lpass-ag-noc
+      - qcom,sm8650-lpass-lpiaon-noc
+      - qcom,sm8650-lpass-lpicx-noc
+      - qcom,sm8650-mc-virt
+      - qcom,sm8650-mmss-noc
+      - qcom,sm8650-nsp-noc
+      - qcom,sm8650-pcie-anoc
+      - qcom,sm8650-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-clk-virt
+              - qcom,sm8650-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-pcie-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe AXI clock
+            - description: cfg-NOC PCIe a-NOC AHB clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-aggre1-noc
+              - qcom,sm8650-aggre2-noc
+              - qcom,sm8650-pcie-anoc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clk_virt: interconnect-0 {
+      compatible = "qcom,sm8650-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16e0000 {
+      compatible = "qcom,sm8650-aggre1-noc";
+      reg = <0x016e0000 0x14400>;
+      #interconnect-cells = <2>;
+      clocks = <&gcc_phy_axi_clk>, <&gcc_prim_axi_clk>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml
new file mode 100644
index 000000000000..08b0210e0e59
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,x1e80100-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on X1E80100
+
+maintainers:
+  - Rajendra Nayak <quic_rjendra@quicinc.com>
+  - Abel Vesa <abel.vesa@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also:: include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,x1e80100-aggre1-noc
+      - qcom,x1e80100-aggre2-noc
+      - qcom,x1e80100-clk-virt
+      - qcom,x1e80100-cnoc-cfg
+      - qcom,x1e80100-cnoc-main
+      - qcom,x1e80100-gem-noc
+      - qcom,x1e80100-lpass-ag-noc
+      - qcom,x1e80100-lpass-lpiaon-noc
+      - qcom,x1e80100-lpass-lpicx-noc
+      - qcom,x1e80100-mc-virt
+      - qcom,x1e80100-mmss-noc
+      - qcom,x1e80100-nsp-noc
+      - qcom,x1e80100-pcie-center-anoc
+      - qcom,x1e80100-pcie-north-anoc
+      - qcom,x1e80100-pcie-south-anoc
+      - qcom,x1e80100-system-noc
+      - qcom,x1e80100-usb-center-anoc
+      - qcom,x1e80100-usb-north-anoc
+      - qcom,x1e80100-usb-south-anoc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,x1e80100-clk-virt
+              - qcom,x1e80100-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clk_virt: interconnect-0 {
+      compatible = "qcom,x1e80100-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16e0000 {
+      compatible = "qcom,x1e80100-aggre1-noc";
+      reg = <0x016e0000 0x14400>;
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
index 00b570c82903..60441f0c5d72 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -11,8 +11,13 @@ maintainers:
 
 description: |
   This interrupt controller is found in the Loongson-3 family of chips and
-  Loongson-2K1000 chip, as the primary package interrupt controller which
+  Loongson-2K series chips, as the primary package interrupt controller which
   can route local I/O interrupt to interrupt lines of cores.
+  Be aware of the following points.
+  1.The Loongson-2K0500 is a single core CPU;
+  2.The Loongson-2K0500/2K1000 has 64 device interrupt sources as inputs, so we
+    need to define two nodes in dts{i} to describe the "0-31" and "32-61" interrupt
+    sources respectively.
 
 allOf:
   - $ref: /schemas/interrupt-controller.yaml#
@@ -33,6 +38,7 @@ properties:
       - const: main
       - const: isr0
       - const: isr1
+    minItems: 2
 
   interrupt-controller: true
 
@@ -45,11 +51,9 @@ properties:
   interrupt-names:
     description: List of names for the parent interrupts.
     items:
-      - const: int0
-      - const: int1
-      - const: int2
-      - const: int3
+      pattern: int[0-3]
     minItems: 1
+    maxItems: 4
 
   '#interrupt-cells':
     const: 2
@@ -69,6 +73,7 @@ required:
   - compatible
   - reg
   - interrupts
+  - interrupt-names
   - interrupt-controller
   - '#interrupt-cells'
   - loongson,parent_int_map
@@ -86,7 +91,8 @@ if:
 then:
   properties:
     reg:
-      minItems: 3
+      minItems: 2
+      maxItems: 3
 
   required:
     - reg-names
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
index 6a206111d4e0..ebb40c48950a 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
@@ -29,6 +29,12 @@ properties:
     maxItems: 1
     description:
       Specifies the base address and size of vMPM registers in RPM MSG RAM.
+    deprecated: true
+
+  qcom,rpm-msg-ram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the APSS MPM slice of the RPM Message RAM
 
   interrupts:
     maxItems: 1
@@ -67,34 +73,46 @@ properties:
 
 required:
   - compatible
-  - reg
   - interrupts
   - mboxes
   - interrupt-controller
   - '#interrupt-cells'
   - qcom,mpm-pin-count
   - qcom,mpm-pin-map
+  - qcom,rpm-msg-ram
 
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    mpm: interrupt-controller@45f01b8 {
-        compatible = "qcom,mpm";
-        interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
-        reg = <0x45f01b8 0x1000>;
-        mboxes = <&apcs_glb 1>;
-        interrupt-controller;
-        #interrupt-cells = <2>;
-        interrupt-parent = <&intc>;
-        qcom,mpm-pin-count = <96>;
-        qcom,mpm-pin-map = <2 275>,
-                           <5 296>,
-                           <12 422>,
-                           <24 79>,
-                           <86 183>,
-                           <90 260>,
-                           <91 260>;
-        #power-domain-cells = <0>;
+
+    remoteproc-rpm {
+        compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc";
+
+        glink-edge {
+            compatible = "qcom,glink-rpm";
+
+            interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+            qcom,rpm-msg-ram = <&rpm_msg_ram>;
+            mboxes = <&apcs_glb 0>;
+        };
+
+        mpm: interrupt-controller {
+            compatible = "qcom,mpm";
+            qcom,rpm-msg-ram = <&apss_mpm>;
+            interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&apcs_glb 1>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&intc>;
+            qcom,mpm-pin-count = <96>;
+            qcom,mpm-pin-map = <2 275>,
+                               <5 296>,
+                               <12 422>,
+                               <24 79>,
+                               <86 183>,
+                               <91 260>;
+            #power-domain-cells = <0>;
+        };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
index 86d61896f591..4bdc8321904b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
@@ -35,12 +35,16 @@ properties:
           - qcom,sdm845-pdc
           - qcom,sdx55-pdc
           - qcom,sdx65-pdc
+          - qcom,sdx75-pdc
           - qcom,sm4450-pdc
           - qcom,sm6350-pdc
           - qcom,sm8150-pdc
           - qcom,sm8250-pdc
           - qcom,sm8350-pdc
           - qcom,sm8450-pdc
+          - qcom,sm8550-pdc
+          - qcom,sm8650-pdc
+          - qcom,x1e80100-pdc
       - const: qcom,pdc
 
   reg:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
index 2ef3081eaaf3..d3b5aec0a3f7 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -26,6 +26,7 @@ properties:
           - renesas,r9a07g043u-irqc   # RZ/G2UL
           - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
           - renesas,r9a07g054-irqc    # RZ/V2L
+          - renesas,r9a08g045-irqc    # RZ/G3S
       - const: renesas,rzg2l-irqc
 
   '#interrupt-cells':
@@ -167,7 +168,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: renesas,r9a07g043u-irqc
+            enum:
+              - renesas,r9a07g043u-irqc
+              - renesas,r9a08g045-irqc
     then:
       properties:
         interrupts:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 0c07e8dda445..709b2211276b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -66,6 +66,7 @@ properties:
           - enum:
               - allwinner,sun20i-d1-plic
               - sophgo,cv1800b-plic
+              - sophgo,cv1812h-plic
               - sophgo,sg2042-plic
               - thead,th1520-plic
           - const: thead,c900-plic
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
index 2b153d7c5421..e44e4e5708a7 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
@@ -55,8 +55,8 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/irq-st.h>
     irq-syscfg {
-        compatible    = "st,stih407-irq-syscfg";
-        st,syscfg     = <&syscfg_cpu>;
+        compatible = "st,stih407-irq-syscfg";
+        st,syscfg = <&syscfg_cpu>;
         st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
                         <ST_IRQ_SYSCFG_PMU_1>;
         st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iommu/apple,dart.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iommu/apple,dart.yaml
index 903edf85d72e..7adb1de455a5 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iommu/apple,dart.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iommu/apple,dart.yaml
@@ -24,6 +24,7 @@ properties:
   compatible:
     enum:
       - apple,t8103-dart
+      - apple,t8103-usb4-dart
       - apple,t8110-dart
       - apple,t6000-dart
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iommu/arm,smmu.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index aa9e1c0895a5..a4042ae24770 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -56,6 +56,8 @@ properties:
               - qcom,sm8350-smmu-500
               - qcom,sm8450-smmu-500
               - qcom,sm8550-smmu-500
+              - qcom,sm8650-smmu-500
+              - qcom,x1e80100-smmu-500
           - const: qcom,smmu-500
           - const: arm,mmu-500
 
@@ -89,6 +91,8 @@ properties:
               - qcom,sm8150-smmu-500
               - qcom,sm8250-smmu-500
               - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
+              - qcom,sm8550-smmu-500
           - const: qcom,adreno-smmu
           - const: qcom,smmu-500
           - const: arm,mmu-500
@@ -429,6 +433,30 @@ allOf:
             - description: interface clock required to access smmu's registers
                 through the TCU's programming interface.
 
+  - if:
+      properties:
+        compatible:
+          items:
+            - enum:
+                - qcom,sm8350-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: iface
+            - const: ahb
+            - const: hlos1_vote_gpu_smmu
+            - const: cx_gmu
+            - const: hub_cx_int
+            - const: hub_aon
+        clocks:
+          minItems: 7
+          maxItems: 7
+
   - if:
       properties:
         compatible:
@@ -453,6 +481,50 @@ allOf:
             - description: Voter clock required for HLOS SMMU access
             - description: Interface clock required for register access
 
+  - if:
+      properties:
+        compatible:
+          const: qcom,sm8450-smmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: gmu
+            - const: hub
+            - const: hlos
+            - const: bus
+            - const: iface
+            - const: ahb
+
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU HUB clock
+            - description: HLOS vote clock
+            - description: GPU memory bus clock
+            - description: GPU SNoC bus clock
+            - description: GPU AHB clock
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,sm8550-smmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: hlos
+            - const: bus
+            - const: iface
+            - const: ahb
+
+        clocks:
+          items:
+            - description: HLOS vote clock
+            - description: GPU memory bus clock
+            - description: GPU SNoC bus clock
+            - description: GPU AHB clock
+
   # Disallow clocks for all other platforms with specific compatibles
   - if:
       properties:
@@ -472,9 +544,8 @@ allOf:
               - qcom,sdx65-smmu-500
               - qcom,sm6350-smmu-500
               - qcom,sm6375-smmu-500
-              - qcom,sm8350-smmu-500
-              - qcom,sm8450-smmu-500
-              - qcom,sm8550-smmu-500
+              - qcom,sm8650-smmu-500
+              - qcom,x1e80100-smmu-500
     then:
       properties:
         clock-names: false
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
index ba9124f721f1..621dde0e45d8 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
@@ -19,9 +19,14 @@ description: |+
 
 properties:
   compatible:
-    enum:
-      - rockchip,iommu
-      - rockchip,rk3568-iommu
+    oneOf:
+      - enum:
+          - rockchip,iommu
+          - rockchip,rk3568-iommu
+      - items:
+          - enum:
+              - rockchip,rk3588-iommu
+          - const: rockchip,rk3568-iommu
 
   reg:
     items:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
new file mode 100644
index 000000000000..760cb336dccb
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/allwinner,sun50i-a100-ledc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A100 LED Controller
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  The LED controller found in Allwinner sunxi SoCs uses a one-wire serial
+  interface to drive up to 1024 RGB LEDs.
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun50i-a100-ledc
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-ledc
+              - allwinner,sun50i-r329-ledc
+          - const: allwinner,sun50i-a100-ledc
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus clock
+      - description: Module clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+    description: TX DMA channel
+
+  dma-names:
+    const: tx
+
+  allwinner,pixel-format:
+    description: Pixel format (subpixel transmission order), default is "grb"
+    enum:
+      - bgr
+      - brg
+      - gbr
+      - grb
+      - rbg
+      - rgb
+
+  allwinner,t0h-ns:
+    default: 336
+    description: Length of high pulse when transmitting a "0" bit
+
+  allwinner,t0l-ns:
+    default: 840
+    description: Length of low pulse when transmitting a "0" bit
+
+  allwinner,t1h-ns:
+    default: 882
+    description: Length of high pulse when transmitting a "1" bit
+
+  allwinner,t1l-ns:
+    default: 294
+    description: Length of low pulse when transmitting a "1" bit
+
+  allwinner,treset-ns:
+    default: 300000
+    description: Minimum delay between transmission frames
+
+patternProperties:
+  "^multi-led@[0-9a-f]+$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1023
+        description: Index of the LED in the series (must be contiguous)
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    ledc: led-controller@2008000 {
+      compatible = "allwinner,sun20i-d1-ledc",
+                   "allwinner,sun50i-a100-ledc";
+      reg = <0x2008000 0x400>;
+      interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&ccu 12>, <&ccu 34>;
+      clock-names = "bus", "mod";
+      resets = <&ccu 12>;
+      dmas = <&dma 42>;
+      dma-names = "tx";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      multi-led@0 {
+        reg = <0x0>;
+        color = <LED_COLOR_ID_RGB>;
+        function = LED_FUNCTION_INDICATOR;
+      };
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
index feb5febaf361..54d6d1f08e24 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
@@ -10,15 +10,19 @@ maintainers:
   - Martin Kurbanov <mmkurbanov@sberdevices.ru>
 
 description: |
-  This controller is present on AW20036/AW20054/AW20072.
-  It is a 3x12/6x9/6x12 matrix LED programmed via
-  an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
-  3 pattern controllers for auto breathing or group dimming control.
+  It is a matrix LED driver programmed via an I2C interface. Devices have
+  a set of individually controlled leds and support 3 pattern controllers
+  for auto breathing or group dimming control. Supported devices:
+    - AW20036 (3x12) 36 LEDs
+    - AW20054 (6x9)  54 LEDs
+    - AW20072 (6x12) 72 LEDs
+    - AW20108 (9x12) 108 LEDs
 
   For more product information please see the link below:
   aw20036 - https://www.awinic.com/en/productDetail/AW20036QNR#tech-docs
   aw20054 - https://www.awinic.com/en/productDetail/AW20054QNR#tech-docs
   aw20072 - https://www.awinic.com/en/productDetail/AW20072QNR#tech-docs
+  aw20108 - https://www.awinic.com/en/productDetail/AW20108QNR#tech-docs
 
 properties:
   compatible:
@@ -26,6 +30,7 @@ properties:
       - awinic,aw20036
       - awinic,aw20054
       - awinic,aw20072
+      - awinic,aw20108
 
   reg:
     maxItems: 1
@@ -36,13 +41,11 @@ properties:
   "#size-cells":
     const: 0
 
-  awinic,display-rows:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      Leds matrix size
+  enable-gpios:
+    maxItems: 1
 
 patternProperties:
-  "^led@[0-9a-f]$":
+  "^led@[0-9a-f]+$":
     type: object
     $ref: common.yaml#
     unevaluatedProperties: false
@@ -60,16 +63,11 @@ patternProperties:
           since the chip has a single global setting.
           The maximum output current of each LED is calculated by the
           following formula:
-            IMAXled = 160000 * (592 / 600.5) * (1 / display-rows)
+            IMAXled = 160000 * (592 / 600.5) * (1 / max-current-switch-number)
           And the minimum output current formula:
-            IMINled = 3300 * (592 / 600.5) * (1 / display-rows)
-
-required:
-  - compatible
-  - reg
-  - "#address-cells"
-  - "#size-cells"
-  - awinic,display-rows
+            IMINled = 3300 * (592 / 600.5) * (1 / max-current-switch-number)
+          where max-current-switch-number is determinated by led configuration
+          and depends on how leds are physically connected to the led driver.
 
 allOf:
   - if:
@@ -78,18 +76,67 @@ allOf:
           contains:
             const: awinic,aw20036
     then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 36
+
+  - if:
       properties:
-        awinic,display-rows:
-          enum: [1, 2, 3]
-    else:
+        compatible:
+          contains:
+            const: awinic,aw20054
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 54
+
+  - if:
       properties:
-        awinic,display-rows:
-          enum: [1, 2, 3, 4, 5, 6, 7]
+        compatible:
+          contains:
+            const: awinic,aw20072
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 72
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: awinic,aw20108
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 108
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
 
 additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/leds/common.h>
 
     i2c {
@@ -101,7 +148,7 @@ examples:
             reg = <0x3a>;
             #address-cells = <1>;
             #size-cells = <0>;
-            awinic,display-rows = <3>;
+            enable-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
 
             led@0 {
                 reg = <0x0>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
index 4191e33626f5..527a37368ed7 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
@@ -14,8 +14,8 @@ description: |
   programmable switching frequency to optimize efficiency.
   It supports two different dimming modes:
 
-  - analog mode, via I2C commands (default)
-  - PWM controlled mode.
+  - analog mode, via I2C commands, as default mode (32 dimming levels)
+  - PWM controlled mode (optional)
 
   The datasheet is available at:
   https://www.monolithicpower.com/en/mp3309c.html
@@ -50,8 +50,6 @@ properties:
 required:
   - compatible
   - reg
-  - max-brightness
-  - default-brightness
 
 unevaluatedProperties: false
 
@@ -66,8 +64,8 @@ examples:
             compatible = "mps,mp3309c";
             reg = <0x17>;
             pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
-            max-brightness = <100>;
-            default-brightness = <80>;
+            brightness-levels = <0 4 8 16 32 64 128 255>;
+            default-brightness = <6>;
             mps,overvoltage-protection-microvolt = <24000000>;
         };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/leds/common.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/common.yaml
index c8d0ba5f2327..55a8d1385e21 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/leds/common.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/common.yaml
@@ -167,7 +167,7 @@ properties:
       Note that this flag is mainly used for PWM-LEDs, where it is not possible
       to map brightness to current. Drivers for other controllers should use
       led-max-microamp.
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   panic-indicator:
     description:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
index a8736fd5a539..1ba607685f5f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
@@ -89,9 +89,11 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/leds/common.h>
-    spmi {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
+
         led-controller@ee00 {
             compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led";
             reg = <0xee00>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/loongarch/cpus.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/loongarch/cpus.yaml
new file mode 100644
index 000000000000..f175872995e1
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/loongarch/cpus.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/loongarch/cpus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LoongArch CPUs
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+description:
+  This document describes the list of LoongArch CPU cores that support FDT,
+  it describe the layout of CPUs in a system through the "cpus" node.
+
+allOf:
+  - $ref: /schemas/cpu.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,la264
+      - loongson,la364
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <1>;
+
+        cpu@0 {
+            compatible = "loongson,la264";
+            device_type = "cpu";
+            reg = <0>;
+            clocks = <&clk LOONGSON2_NODE_CLK>;
+        };
+
+        cpu@1 {
+            compatible = "loongson,la264";
+            device_type = "cpu";
+            reg = <1>;
+            clocks = <&clk LOONGSON2_NODE_CLK>;
+        };
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/loongarch/loongson.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/loongarch/loongson.yaml
new file mode 100644
index 000000000000..e1a4a97b7576
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/loongarch/loongson.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/loongarch/loongson.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson SoC-based boards
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Loongson-2K0500 processor based boards
+        items:
+          - const: loongson,ls2k0500-ref
+          - const: loongson,ls2k0500
+
+      - description: Loongson-2K1000 processor based boards
+        items:
+          - const: loongson,ls2k1000-ref
+          - const: loongson,ls2k1000
+
+      - description: Loongson-2K2000 processor based boards
+        items:
+          - const: loongson,ls2k2000-ref
+          - const: loongson,ls2k2000
+
+additionalProperties: true
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
index a38413f8d132..79eb523b8436 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -23,6 +23,24 @@ properties:
               - qcom,ipq8074-apcs-apps-global
               - qcom,ipq9574-apcs-apps-global
           - const: qcom,ipq6018-apcs-apps-global
+      - items:
+          - enum:
+              - qcom,qcs404-apcs-apps-global
+          - const: qcom,msm8916-apcs-kpss-global
+          - const: syscon
+      - items:
+          - enum:
+              - qcom,msm8976-apcs-kpss-global
+          - const: qcom,msm8994-apcs-kpss-global
+          - const: syscon
+      - items:
+          - enum:
+              - qcom,msm8998-apcs-hmss-global
+              - qcom,sdm660-apcs-hmss-global
+              - qcom,sm4250-apcs-hmss-global
+              - qcom,sm6115-apcs-hmss-global
+              - qcom,sm6125-apcs-hmss-global
+          - const: qcom,msm8994-apcs-kpss-global
       - items:
           - enum:
               - qcom,sc7180-apss-shared
@@ -34,22 +52,14 @@ properties:
               - qcom,msm8916-apcs-kpss-global
               - qcom,msm8939-apcs-kpss-global
               - qcom,msm8953-apcs-kpss-global
-              - qcom,msm8976-apcs-kpss-global
               - qcom,msm8994-apcs-kpss-global
-              - qcom,qcs404-apcs-apps-global
               - qcom,sdx55-apcs-gcc
           - const: syscon
       - enum:
           - qcom,ipq6018-apcs-apps-global
-          - qcom,ipq8074-apcs-apps-global
           - qcom,msm8996-apcs-hmss-global
-          - qcom,msm8998-apcs-hmss-global
           - qcom,qcm2290-apcs-hmss-global
-          - qcom,sdm660-apcs-hmss-global
           - qcom,sdm845-apss-shared
-          - qcom,sm4250-apcs-hmss-global
-          - qcom,sm6115-apcs-hmss-global
-          - qcom,sm6125-apcs-hmss-global
 
   reg:
     maxItems: 1
@@ -80,20 +90,38 @@ allOf:
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,msm8916-apcs-kpss-global
-            - qcom,msm8939-apcs-kpss-global
-            - qcom,qcs404-apcs-apps-global
+          contains:
+            enum:
+              - qcom,msm8916-apcs-kpss-global
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary pll parent of the clock driver
+            - description: auxiliary parent
+        clock-names:
+          items:
+            - const: pll
+            - const: aux
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8939-apcs-kpss-global
     then:
       properties:
         clocks:
           items:
             - description: primary pll parent of the clock driver
             - description: auxiliary parent
+            - description: reference clock
         clock-names:
           items:
             - const: pll
             - const: aux
+            - const: ref
 
   - if:
       properties:
@@ -113,6 +141,7 @@ allOf:
             - const: ref
             - const: pll
             - const: aux
+
   - if:
       properties:
         compatible:
@@ -137,16 +166,10 @@ allOf:
         compatible:
           enum:
             - qcom,msm8953-apcs-kpss-global
-            - qcom,msm8976-apcs-kpss-global
             - qcom,msm8994-apcs-kpss-global
             - qcom,msm8996-apcs-hmss-global
-            - qcom,msm8998-apcs-hmss-global
             - qcom,qcm2290-apcs-hmss-global
-            - qcom,sdm660-apcs-hmss-global
             - qcom,sdm845-apss-shared
-            - qcom,sm4250-apcs-hmss-global
-            - qcom,sm6115-apcs-hmss-global
-            - qcom,sm6125-apcs-hmss-global
     then:
       properties:
         clocks: false
@@ -192,7 +215,8 @@ examples:
     #define GCC_APSS_AHB_CLK_SRC  1
     #define GCC_GPLL0_AO_OUT_MAIN 123
     apcs: mailbox@b011000 {
-        compatible = "qcom,qcs404-apcs-apps-global", "syscon";
+        compatible = "qcom,qcs404-apcs-apps-global",
+                     "qcom,msm8916-apcs-kpss-global", "syscon";
         reg = <0x0b011000 0x1000>;
         #mbox-cells = <1>;
         clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
index a35f9483dc71..8f004868aad9 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
@@ -35,6 +35,7 @@ properties:
           - qcom,sm8450-ipcc
           - qcom,sm8550-ipcc
           - qcom,sm8650-ipcc
+          - qcom,x1e80100-ipcc
       - const: qcom,ipcc
 
   reg:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
index 8b15a0532120..fe83b5cb1278 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
@@ -37,7 +37,9 @@ maintainers:
 
 properties:
   compatible:
-    const: xlnx,zynqmp-ipi-mailbox
+    enum:
+      - xlnx,zynqmp-ipi-mailbox
+      - xlnx,versal-ipi-mailbox
 
   method:
     description: |
@@ -58,6 +60,12 @@ properties:
   '#size-cells':
     const: 2
 
+  reg:
+    maxItems: 2
+
+  reg-names:
+    maxItems: 2
+
   xlnx,ipi-id:
     description: |
       Remote Xilinx IPI agent ID of which the mailbox is connected to.
@@ -76,7 +84,17 @@ patternProperties:
     properties:
 
       compatible:
-        const: xlnx,zynqmp-ipi-dest-mailbox
+        enum:
+          - xlnx,zynqmp-ipi-dest-mailbox
+          - xlnx,versal-ipi-dest-mailbox
+
+      reg:
+        minItems: 1
+        maxItems: 4
+
+      reg-names:
+        minItems: 1
+        maxItems: 4
 
       xlnx,ipi-id:
         description:
@@ -88,23 +106,44 @@ patternProperties:
         description:
           It contains tx(0) or rx(1) channel IPI id number.
 
-      reg:
-        maxItems: 4
-
-      reg-names:
-        items:
-          - const: local_request_region
-          - const: local_response_region
-          - const: remote_request_region
-          - const: remote_response_region
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                enum:
+                  - xlnx,zynqmp-ipi-dest-mailbox
+        then:
+          properties:
+            reg:
+              maxItems: 4
+
+            reg-names:
+              items:
+                - const: local_request_region
+                - const: local_response_region
+                - const: remote_request_region
+                - const: remote_response_region
+        else:
+          properties:
+            reg:
+              minItems: 1
+              items:
+                - description: Remote IPI agent control register region
+                - description: Remote IPI agent optional message buffers
+
+            reg-names:
+              minItems: 1
+              items:
+                - const: ctrl
+                - const: msg
 
     required:
       - compatible
       - reg
       - reg-names
       - "#mbox-cells"
-
-additionalProperties: false
+      - xlnx,ipi-id
 
 required:
   - compatible
@@ -113,6 +152,36 @@ required:
   - '#size-cells'
   - xlnx,ipi-id
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynqmp-ipi-mailbox
+    then:
+      properties:
+        reg: false
+        reg-names: false
+
+    else:
+      properties:
+        reg:
+          items:
+            - description: Host IPI agent control register region
+            - description: Host IPI agent optional message buffers
+
+        reg-names:
+          items:
+            - const: ctrl
+            - const: msg
+
+      required:
+        - reg
+        - reg-names
+
+additionalProperties: false
+
 examples:
   - |
     #include<dt-bindings/interrupt-controller/arm-gic.h>
@@ -144,4 +213,41 @@ examples:
       };
     };
 
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      mailbox@ff300000 {
+        compatible = "xlnx,versal-ipi-mailbox";
+        interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+        reg = <0x0 0xff300000 0x0 0x1000>,
+              <0x0 0xff990000 0x0 0x1ff>;
+        reg-names = "ctrl", "msg";
+        xlnx,ipi-id = <0>;
+        ranges;
+
+        /* buffered IPI */
+        mailbox@ff340000 {
+          compatible = "xlnx,versal-ipi-dest-mailbox";
+          reg = <0x0 0xff340000 0x0 0x1000>,
+                <0x0 0xff990400 0x0 0x1ff>;
+          reg-names = "ctrl", "msg";
+          #mbox-cells = <1>;
+          xlnx,ipi-id = <4>;
+        };
+
+        /* bufferless IPI */
+        mailbox@ff370000 {
+          compatible = "xlnx,versal-ipi-dest-mailbox";
+          reg = <0x0 0xff370000 0x0 0x1000>;
+          reg-names = "ctrl";
+          #mbox-cells = <1>;
+          xlnx,ipi-id = <7>;
+        };
+      };
+    };
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/cnm,wave521c.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/cnm,wave521c.yaml
new file mode 100644
index 000000000000..6a11c1d11fb5
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/cnm,wave521c.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cnm,wave521c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chips&Media Wave 5 Series multi-standard codec IP
+
+maintainers:
+  - Nas Chung <nas.chung@chipsnmedia.com>
+  - Jackson Lee <jackson.lee@chipsnmedia.com>
+
+description:
+  The Chips&Media WAVE codec IP is a multi format video encoder/decoder
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,j721s2-wave521c
+      - const: cnm,wave521c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: VCODEC clock
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The VPU uses the SRAM to store some of the reference data instead of
+      storing it on DMA memory. It is mainly used for the purpose of reducing
+      bandwidth.
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    vpu: video-codec@12345678 {
+        compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+        reg = <0x12345678 0x1000>;
+        clocks = <&clks 42>;
+        interrupts = <42>;
+        sram = <&sram>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml
new file mode 100644
index 000000000000..d3329e991d16
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/alliedvision,alvium-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allied Vision Alvium Camera
+
+maintainers:
+  - Tommaso Merciai <tomm.merciai@gmail.com>
+  - Martin Hecht <martin.hecht@avnet.eu>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: alliedvision,alvium-csi2
+
+  reg:
+    maxItems: 1
+
+  vcc-ext-in-supply:
+    description: |
+      The regulator that supplies power to the VCC_EXT_IN pins.
+
+  port:
+    description: Digital Output Port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+          data-lanes:
+            minItems: 1
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - vcc-ext-in-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        alvium: camera@3c {
+            compatible = "alliedvision,alvium-csi2";
+            reg = <0x3c>;
+            vcc-ext-in-supply = <&reg_vcc_ext_in>;
+
+            port {
+                alvium_out: endpoint {
+                    remote-endpoint = <&mipi_csi_0_in>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <681250000>;
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml
index 22a810fc7222..fe312cc6a873 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml
@@ -15,7 +15,9 @@ description:
 
 properties:
   compatible:
-    const: asahi-kasei,ak7375
+    enum:
+      - asahi-kasei,ak7345
+      - asahi-kasei,ak7375
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml
new file mode 100644
index 000000000000..f81e7daed67b
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc0308.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Galaxycore GC0308 and GC0309 Image Sensors
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  The GalaxyCore GC0308 (1/6.5") and GC0309 (1/9") are 640x480 VGA sensors
+  programmable through an I2C interface and connected via parallel bus.
+  They include an ISP capable of auto exposure and auto white balance.
+
+allOf:
+  - $ref: ../video-interface-devices.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: galaxycore,gc0308
+      - items:
+          - const: galaxycore,gc0309
+          - const: galaxycore,gc0308
+
+  reg:
+    const: 0x21
+
+  clocks:
+    description: Reference to the xclk clock.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO descriptor for the reset pin.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO descriptor for the powerdown pin.
+    maxItems: 1
+
+  vdd28-supply:
+    description: 2.8V supply
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-width: true
+          data-shift: true
+          hsync-active: true
+          vsync-active: true
+          data-active: true
+          pclk-sample: true
+
+        required:
+          - bus-width
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - powerdown-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@21 {
+            compatible = "galaxycore,gc0308";
+            reg = <0x21>;
+            clocks = <&camera_clk>;
+            powerdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+            vdd28-supply = <&vdd28>;
+
+            port {
+                gc0308_ep: endpoint {
+                    remote-endpoint = <&parallel_from_gc0308>;
+                    bus-width = <8>;
+                    data-shift = <2>; /* lines 9:2 are used */
+                    hsync-active = <1>; /* active high */
+                    vsync-active = <1>; /* active high */
+                    data-active = <1>; /* active high */
+                    pclk-sample = <1>; /* sample on rising edge */
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
new file mode 100644
index 000000000000..1726ecca4c77
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc2145.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Galaxy Core 1/5'' UXGA CMOS Image Sensor
+
+maintainers:
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+description:
+  The Galaxy Core GC2145 is a 2 Megapixel CMOS image sensor, for mobile
+  phone camera applications and digital camera products. GC2145 incorporates a
+  1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal
+  processor allowing AE/AWB/interpolation/de-noise/color-conversion and
+  gamma correction. Bayer RGB, RGB565 and YCbCr 4:2:2 can be provided by the
+  sensor. It is programmable through an I2C interface. Image data is sent
+  either through a parallel interface or through MIPI CSI-2.
+
+allOf:
+  - $ref: ../video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: galaxycore,gc2145
+
+  reg:
+    const: 0x3c
+
+  clocks:
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  iovdd-supply:
+    description: Power Supply for I/O circuits (1.7 - 3V).
+
+  avdd-supply:
+    description: Power for analog circuit/sensor array (2.7 - 3V).
+
+  dvdd-supply:
+    description: Power for digital core (1.7 - 1.9V).
+
+  orientation: true
+
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+        required:
+          - link-frequencies
+
+    required:
+      - endpoint
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - powerdown-gpios
+  - reset-gpios
+  - iovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@3c {
+            compatible = "galaxycore,gc2145";
+            reg = <0x3c>;
+            clocks = <&clk_ext_camera>;
+            iovdd-supply = <&scmi_v3v3_sw>;
+            avdd-supply = <&scmi_v3v3_sw>;
+            dvdd-supply = <&scmi_v3v3_sw>;
+            powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+            reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&mipid02_0>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <120000000 192000000 240000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/i2c/ov8856.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
index 57f5e48fd8e0..816dac9c6f60 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@@ -67,19 +67,17 @@ properties:
 
         properties:
           data-lanes:
-            description: |-
-              The driver only supports four-lane operation.
-            items:
-              - const: 1
-              - const: 2
-              - const: 3
-              - const: 4
-
-          link-frequencies:
-            description: Frequencies listed are driver, not h/w limitations.
-            maxItems: 2
-            items:
-              enum: [ 360000000, 180000000 ]
+            oneOf:
+              - items:
+                  - const: 1
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
 
         required:
           - link-frequencies
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
new file mode 100644
index 000000000000..2b6143aff391
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov64a40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV64A40 Image Sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov64a40
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  dvdd-supply:
+    description: Digital core voltage supply, 1.1 volts
+
+  dovdd-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  powerdown-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          bus-type:
+            enum:
+              - 1 # MIPI CSI-2 C-PHY
+              - 4 # MIPI CSI-2 D-PHY
+          data-lanes: true
+          link-frequencies: true
+          clock-noncontinuous: true
+          remote-endpoint: true
+
+        required:
+          - bus-type
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@36 {
+              compatible = "ovti,ov64a40";
+              reg = <0x36>;
+              clocks = <&camera_clk>;
+              dovdd-supply = <&vgen4_reg>;
+              avdd-supply = <&vgen3_reg>;
+              dvdd-supply = <&vgen2_reg>;
+              powerdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+              reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+              rotation = <180>;
+              orientation = <2>;
+
+              port {
+                  endpoint {
+                      remote-endpoint = <&mipi_csi2_in>;
+                      bus-type = <4>;
+                      data-lanes = <1 2 3 4>;
+                      link-frequencies = /bits/ 64 <456000000>;
+                  };
+              };
+          };
+      };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
index a167dcdb3a32..106c36ee966d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
@@ -32,6 +32,15 @@ properties:
     description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
     maxItems: 1
 
+  avdd-supply:
+    description: Analog power supply (2.9V)
+
+  ovdd-supply:
+    description: Interface power supply (1.8V)
+
+  dvdd-supply:
+    description: Digital power supply (1.2V)
+
   reset-gpios:
     description: Reference to the GPIO connected to the XCLR pin, if any.
     maxItems: 1
@@ -79,6 +88,10 @@ examples:
             assigned-clock-parents = <&imx335_clk_parent>;
             assigned-clock-rates = <24000000>;
 
+            avdd-supply = <&camera_vdda_2v9>;
+            ovdd-supply = <&camera_vddo_1v8>;
+            dvdd-supply = <&camera_vddd_1v2>;
+
             port {
                 imx335: endpoint {
                     remote-endpoint = <&cam>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
new file mode 100644
index 000000000000..e37317f81072
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/techwell,tw9900.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Techwell TW9900 NTSC/PAL video decoder
+
+maintainers:
+  - Mehdi Djait <mehdi.djait@bootlin.com>
+
+description:
+  The tw9900 is a multi-standard video decoder, supporting NTSC, PAL standards
+  with auto-detection features.
+
+properties:
+  compatible:
+    const: techwell,tw9900
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: VDD power supply
+
+  reset-gpios:
+    description: GPIO descriptor for the RESET input pin
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO descriptor for the POWERDOWN input pin
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Analog input port
+
+        properties:
+          endpoint@0:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: CVBS over MUX0
+
+          endpoint@1:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: CVBS over MUX1
+
+          endpoint@2:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Chroma over CIN0 and Y over MUX0
+
+          endpoint@3:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Chroma over CIN0 and Y over MUX1
+
+        oneOf:
+          - required:
+              - endpoint@0
+          - required:
+              - endpoint@1
+          - required:
+              - endpoint@2
+          - required:
+              - endpoint@3
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for the decoder output.
+
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - ports
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/display/sdtv-standards.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    composite_connector {
+        compatible = "composite-video-connector";
+        label = "tv";
+        sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>;
+
+        port {
+            composite_to_tw9900: endpoint {
+                remote-endpoint = <&tw9900_to_composite>;
+            };
+        };
+    };
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        video-decoder@44 {
+            compatible = "techwell,tw9900";
+            reg = <0x44>;
+
+            vdd-supply = <&tw9900_supply>;
+            reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    reg = <0>;
+                    tw9900_to_composite: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&composite_to_tw9900>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&cif_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
new file mode 100644
index 000000000000..1978fbb77a6c
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
@@ -0,0 +1,224 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Ideas on Board
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/thine,thp7312.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: THine THP7312
+
+maintainers:
+  - Paul Elder <paul.elder@@ideasonboard.com>
+
+description:
+  The THP7312 is a standalone ISP controlled over i2c, and is capable of
+  various image processing and correction functions, including 3A control. It
+  can be connected to CMOS image sensors from various vendors, supporting both
+  MIPI CSI-2 and parallel interfaces. It can also output on either MIPI CSI-2
+  or parallel. The hardware is capable of transmitting and receiving MIPI
+  interlaved data strams with data types or multiple virtual channel
+  identifiers.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: thine,thp7312
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: CLKI clock input
+
+  thine,boot-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+    default: 1
+    description:
+      Boot mode of the THP7312, reflecting the value of the BOOT[0] pin strap.
+      0 is for the SPI/2-wire slave boot, 1 is for the SPI master boot (from
+      external flash ROM).
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the RESET_N pin, if any.
+      Must be released (set high) after all supplies are applied.
+
+  vddcore-supply:
+    description:
+      1.2V supply for core, PLL, MIPI rx and MIPI tx.
+
+  vhtermrx-supply:
+    description:
+      Supply for input (RX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel.
+
+  vddtx-supply:
+    description:
+      Supply for output (TX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel.
+
+  vddhost-supply:
+    description:
+      Supply for host interface. 1.8V, 2.8V, or 3.3V.
+
+  vddcmos-supply:
+    description:
+      Supply for sensor interface. 1.8V, 2.8V, or 3.3V.
+
+  vddgpio-0-supply:
+    description:
+      Supply for GPIO_0. 1.8V, 2.8V, or 3.3V.
+
+  vddgpio-1-supply:
+    description:
+      Supply for GPIO_1. 1.8V, 2.8V, or 3.3V.
+
+  orientation: true
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            const: 4 # CSI-2 D-PHY
+
+          data-lanes:
+            description:
+              This property is for lane reordering between the THP7312 and the
+              SoC. The sensor supports either two-lane, or four-lane operation.
+              If this property is omitted four-lane operation is assumed. For
+              two-lane operation the property must be set to <1 2>.
+            minItems: 2
+            maxItems: 4
+            items:
+              maximum: 4
+
+  sensors:
+    type: object
+    description: List of connected sensors
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^sensor@[01]$":
+        type: object
+        description:
+          Sensors connected to the first and second input, with one node per
+          sensor.
+
+        properties:
+          thine,model:
+            $ref: /schemas/types.yaml#/definitions/string
+            description:
+              Model of the connected sensors. Must be a valid compatible string.
+
+          reg:
+            description: THP7312 input port number
+            items:
+              - maximum: 1
+
+          data-lanes:
+            $ref: /schemas/media/video-interfaces.yaml#/properties/data-lanes
+            items:
+              maxItems: 4
+            description:
+              This property is for lane reordering between the THP7312 and the imaging
+              sensor that it is connected to.
+
+        required:
+          - reg
+          - data-lanes
+
+        additionalProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - clocks
+  - vddcore-supply
+  - vhtermrx-supply
+  - vddtx-supply
+  - vddhost-supply
+  - vddcmos-supply
+  - vddgpio-0-supply
+  - vddgpio-1-supply
+  - sensors
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@61 {
+            compatible = "thine,thp7312";
+            reg = <0x61>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam1_pins_default>;
+
+            reset-gpios = <&pio 119 GPIO_ACTIVE_LOW>;
+            clocks = <&camera61_clk>;
+
+            vddcore-supply = <&vsys_v4p2>;
+            vhtermrx-supply = <&vsys_v4p2>;
+            vddtx-supply = <&vsys_v4p2>;
+            vddhost-supply = <&vsys_v4p2>;
+            vddcmos-supply = <&vsys_v4p2>;
+            vddgpio-0-supply = <&vsys_v4p2>;
+            vddgpio-1-supply = <&vsys_v4p2>;
+
+            orientation = <0>;
+            rotation = <0>;
+
+            sensors {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                sensor@0 {
+                    thine,model = "sony,imx258";
+                    reg = <0>;
+
+                    data-lanes = <4 1 3 2>;
+                };
+            };
+
+            port {
+                thp7312_2_endpoint: endpoint {
+                    remote-endpoint = <&mipi_thp7312_2>;
+                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                    data-lanes = <4 2 1 3>;
+                };
+            };
+        };
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml
new file mode 100644
index 000000000000..03f31b009085
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 Film Grain
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+  Film Grain (FG) is a Media Data Path 3 (MDP3) component used to add
+  the film grain according to the AOMedia Video 1 (AV1) standard.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-mdp3-fg
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@14002000 {
+        compatible = "mediatek,mt8195-mdp3-fg";
+        reg = <0x14002000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml
new file mode 100644
index 000000000000..d4609bba6578
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-hdr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 HDR
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+  A Media Data Path 3 (MDP3) component used to perform conversion from
+  High Dynamic Range (HDR) to Standard Dynamic Range (SDR).
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-mdp3-hdr
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@14004000 {
+        compatible = "mediatek,mt8195-mdp3-hdr";
+        reg = <0x14004000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
index 7032c7e15039..59db8306485b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
@@ -20,8 +20,14 @@ description: |
 
 properties:
   compatible:
-    items:
-      - const: mediatek,mt8183-mdp3-rdma
+    oneOf:
+      - enum:
+          - mediatek,mt8183-mdp3-rdma
+          - mediatek,mt8195-mdp3-rdma
+          - mediatek,mt8195-vdo1-rdma
+      - items:
+          - const: mediatek,mt8188-vdo1-rdma
+          - const: mediatek,mt8195-vdo1-rdma
 
   reg:
     maxItems: 1
@@ -45,6 +51,14 @@ properties:
       include/dt-bindings/gce/<chip>-gce.h of each chips.
     $ref: /schemas/types.yaml#/definitions/uint32-array
 
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the System Control Processor (SCP) used for initializing
+      and stopping the MDP3, for sending frame data locations to the MDP3's
+      VPU and to install Inter-Processor Interrupt handlers to control
+      processing states.
+
   power-domains:
     maxItems: 1
 
@@ -52,6 +66,7 @@ properties:
     items:
       - description: RDMA clock
       - description: RSZ clock
+    minItems: 1
 
   iommus:
     maxItems: 1
@@ -60,16 +75,72 @@ properties:
     items:
       - description: used for 1st data pipe from RDMA
       - description: used for 2nd data pipe from RDMA
+      - description: used for 3rd data pipe from RDMA
+      - description: used for 4th data pipe from RDMA
+      - description: used for the data pipe from SPLIT
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
 
 required:
   - compatible
   - reg
   - mediatek,gce-client-reg
-  - mediatek,gce-events
   - power-domains
   - clocks
   - iommus
-  - mboxes
+  - '#dma-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183-mdp3-rdma
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        mboxes:
+          minItems: 2
+
+      required:
+        - mboxes
+        - mediatek,gce-events
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8195-mdp3-rdma
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        mboxes:
+          minItems: 5
+
+      required:
+        - mediatek,gce-events
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8195-vdo1-rdma
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
 
 additionalProperties: false
 
@@ -80,16 +151,17 @@ examples:
     #include <dt-bindings/power/mt8183-power.h>
     #include <dt-bindings/memory/mt8183-larb-port.h>
 
-    mdp3_rdma0: mdp3-rdma0@14001000 {
-      compatible = "mediatek,mt8183-mdp3-rdma";
-      reg = <0x14001000 0x1000>;
-      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
-      mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
-                            <CMDQ_EVENT_MDP_RDMA0_EOF>;
-      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-      clocks = <&mmsys CLK_MM_MDP_RDMA0>,
-               <&mmsys CLK_MM_MDP_RSZ1>;
-      iommus = <&iommu>;
-      mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
-               <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+    dma-controller@14001000 {
+        compatible = "mediatek,mt8183-mdp3-rdma";
+        reg = <0x14001000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+                              <CMDQ_EVENT_MDP_RDMA0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+                 <&mmsys CLK_MM_MDP_RSZ1>;
+        iommus = <&iommu>;
+        mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
+                 <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+        #dma-cells = <1>;
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
index 78f9de6192ef..f5676bec4326 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
@@ -15,9 +15,13 @@ description: |
 
 properties:
   compatible:
-    items:
+    oneOf:
       - enum:
           - mediatek,mt8183-mdp3-rsz
+      - items:
+          - enum:
+              - mediatek,mt8195-mdp3-rsz
+          - const: mediatek,mt8183-mdp3-rsz
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml
new file mode 100644
index 000000000000..d815bea29154
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-stitch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 STITCH
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+  One of Media Data Path 3 (MDP3) components used to combine multiple video frame
+  with overlapping fields of view to produce a segmented panorame.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-mdp3-stitch
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@14003000 {
+        compatible = "mediatek,mt8195-mdp3-stitch";
+        reg = <0x14003000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_STITCH>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml
new file mode 100644
index 000000000000..14ea556d4f82
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-tcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 Tone Curve Conversion
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  Tone Curve Conversion (TCC) is one of Media Profile Path 3 (MDP3) components.
+  It is used to handle the tone mapping of various gamma curves in order to
+  achieve HDR10 effects. This helps adapt the content to the color and
+  brightness range that standard display devices typically support.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-mdp3-tcc
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@1400b000 {
+        compatible = "mediatek,mt8195-mdp3-tcc";
+        reg = <0x1400b000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml
new file mode 100644
index 000000000000..8ab7f2d8e148
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-tdshp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 Two-Dimensional Sharpness
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+  Two-Dimensional Sharpness (TDSHP) is a Media Profile Path 3 (MDP3) component
+  used to perform image edge sharpening and enhance vividness and contrast.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-mdp3-tdshp
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@14007000 {
+        compatible = "mediatek,mt8195-mdp3-tdshp";
+        reg = <0x14007000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
index 0baa77198fa2..53a679338402 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
@@ -15,9 +15,13 @@ description: |
 
 properties:
   compatible:
-    items:
+    oneOf:
       - enum:
           - mediatek,mt8183-mdp3-wrot
+      - items:
+          - enum:
+              - mediatek,mt8195-mdp3-wrot
+          - const: mediatek,mt8183-mdp3-wrot
 
   reg:
     maxItems: 1
@@ -50,6 +54,9 @@ properties:
   iommus:
     maxItems: 1
 
+  '#dma-cells':
+    const: 1
+
 required:
   - compatible
   - reg
@@ -58,6 +65,7 @@ required:
   - power-domains
   - clocks
   - iommus
+  - '#dma-cells'
 
 additionalProperties: false
 
@@ -68,13 +76,14 @@ examples:
     #include <dt-bindings/power/mt8183-power.h>
     #include <dt-bindings/memory/mt8183-larb-port.h>
 
-    mdp3_wrot0: mdp3-wrot0@14005000 {
-      compatible = "mediatek,mt8183-mdp3-wrot";
-      reg = <0x14005000 0x1000>;
-      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
-      mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
-                            <CMDQ_EVENT_MDP_WROT0_EOF>;
-      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-      clocks = <&mmsys CLK_MM_MDP_WROT0>;
-      iommus = <&iommu>;
+    dma-controller@14005000 {
+        compatible = "mediatek,mt8183-mdp3-wrot";
+        reg = <0x14005000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+                              <CMDQ_EVENT_MDP_WROT0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_WROT0>;
+        iommus = <&iommu>;
+        #dma-cells = <1>;
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
index e466dff8286d..afcaa427d48b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -90,15 +90,16 @@ properties:
         description: connection point for input on the parallel interface
 
         properties:
-          bus-type:
-            enum: [5, 6]
-
           endpoint:
             $ref: video-interfaces.yaml#
             unevaluatedProperties: false
 
-        required:
-          - bus-type
+            properties:
+              bus-type:
+                enum: [5, 6]
+
+            required:
+              - bus-type
 
     anyOf:
       - required:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml
index 084b44582a43..b46cc780703c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml
@@ -24,6 +24,7 @@ properties:
           - samsung,mfc-v7                # Exynos5420
           - samsung,mfc-v8                # Exynos5800
           - samsung,mfc-v10               # Exynos7880
+          - tesla,fsd-mfc                 # Tesla FSD
       - items:
           - enum:
               - samsung,exynos3250-mfc    # Exynos3250
@@ -49,7 +50,9 @@ properties:
 
   iommu-names:
     minItems: 1
-    maxItems: 2
+    items:
+      - const: left
+      - const: right
 
   power-domains:
     maxItems: 1
@@ -84,7 +87,7 @@ allOf:
             - const: sclk_mfc
         iommus:
           maxItems: 1
-        iommus-names: false
+        iommu-names: false
 
   - if:
       properties:
@@ -102,11 +105,9 @@ allOf:
             - const: aclk
             - const: aclk_xiu
         iommus:
-          maxItems: 2
-        iommus-names:
-          items:
-            - const: left
-            - const: right
+          minItems: 2
+        iommu-names:
+          minItems: 2
 
   - if:
       properties:
@@ -123,11 +124,9 @@ allOf:
             - const: mfc
             - const: sclk_mfc
         iommus:
-          maxItems: 2
-        iommus-names:
-          items:
-            - const: left
-            - const: right
+          minItems: 2
+        iommu-names:
+          minItems: 2
 
   - if:
       properties:
@@ -144,11 +143,9 @@ allOf:
           items:
             - const: mfc
         iommus:
-          maxItems: 2
-        iommus-names:
-          items:
-            - const: left
-            - const: right
+          minItems: 2
+        iommu-names:
+          minItems: 2
 
   - if:
       properties:
@@ -161,9 +158,23 @@ allOf:
         clocks:
           minItems: 1
           maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - tesla,fsd-mfc
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: mfc
         iommus:
-          minItems: 1
           maxItems: 2
+        iommus-names: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
new file mode 100644
index 000000000000..87731f3ce7bd
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32-dcmipp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DCMIPP Digital Camera Memory Interface Pixel Processor
+
+maintainers:
+  - Hugues Fruchet <hugues.fruchet@foss.st.com>
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp13-dcmipp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      DCMIPP supports a single port node with parallel bus.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+            default: 5
+
+          bus-width:
+            enum: [8, 10, 12, 14]
+            default: 8
+
+          pclk-sample: true
+          hsync-active: true
+          vsync-active: true
+
+        required:
+          - pclk-sample
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp13-clks.h>
+    #include <dt-bindings/reset/stm32mp13-resets.h>
+    dcmipp@5a000000 {
+        compatible = "st,stm32mp13-dcmipp";
+        reg = <0x5a000000 0x400>;
+        interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&rcc DCMIPP_R>;
+        clocks = <&rcc DCMIPP_K>;
+
+        port {
+             endpoint {
+                   remote-endpoint = <&mipid02_2>;
+                   bus-width = <8>;
+                   hsync-active = <0>;
+                   vsync-active = <0>;
+                   pclk-sample = <0>;
+             };
+        };
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
new file mode 100644
index 000000000000..c66586d90fa2
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive SoC CAMSS ISP
+
+maintainers:
+  - Jack Zhu <jack.zhu@starfivetech.com>
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+description:
+  The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC. It
+  consists of a VIN controller (Video In Controller, a top-level control unit)
+  and an ISP.
+
+properties:
+  compatible:
+    const: starfive,jh7110-camss
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: syscon
+      - const: isp
+
+  clocks:
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: apb_func
+      - const: wrapper_clk_c
+      - const: dvp_inv
+      - const: axiwr
+      - const: mipi_rx0_pxl
+      - const: ispcore_2x
+      - const: isp_axi
+
+  resets:
+    maxItems: 6
+
+  reset-names:
+    items:
+      - const: wrapper_p
+      - const: wrapper_c
+      - const: axird
+      - const: axiwr
+      - const: isp_top_n
+      - const: isp_top_axi
+
+  power-domains:
+    items:
+      - description: JH7110 ISP Power Domain Switch Controller.
+
+  interrupts:
+    maxItems: 4
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Input port for receiving DVP data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              bus-type:
+                enum: [5, 6]
+
+              bus-width:
+                enum: [8, 10, 12]
+
+              data-shift:
+                enum: [0, 2]
+                default: 0
+
+              hsync-active:
+                enum: [0, 1]
+                default: 1
+
+              vsync-active:
+                enum: [0, 1]
+                default: 1
+
+            required:
+              - bus-type
+              - bus-width
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port for receiving CSI data.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    isp@19840000 {
+        compatible = "starfive,jh7110-camss";
+        reg = <0x19840000 0x10000>,
+              <0x19870000 0x30000>;
+        reg-names = "syscon", "isp";
+        clocks = <&ispcrg 0>,
+                 <&ispcrg 13>,
+                 <&ispcrg 2>,
+                 <&ispcrg 12>,
+                 <&ispcrg 1>,
+                 <&syscrg 51>,
+                 <&syscrg 52>;
+        clock-names = "apb_func",
+                      "wrapper_clk_c",
+                      "dvp_inv",
+                      "axiwr",
+                      "mipi_rx0_pxl",
+                      "ispcore_2x",
+                      "isp_axi";
+        resets = <&ispcrg 0>,
+                 <&ispcrg 1>,
+                 <&ispcrg 10>,
+                 <&ispcrg 11>,
+                 <&syscrg 41>,
+                 <&syscrg 42>;
+        reset-names = "wrapper_p",
+                      "wrapper_c",
+                      "axird",
+                      "axiwr",
+                      "isp_top_n",
+                      "isp_top_axi";
+        power-domains = <&pwrc 5>;
+        interrupts = <92>, <87>, <88>, <90>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                vin_from_sc2235: endpoint {
+                    remote-endpoint = <&sc2235_to_vin>;
+                    bus-type = <5>;
+                    bus-width = <8>;
+                    data-shift = <2>;
+                    hsync-active = <1>;
+                    vsync-active = <0>;
+                    pclk-sample = <1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                vin_from_csi2rx: endpoint {
+                    remote-endpoint = <&csi2rx_to_vin>;
+                };
+            };
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/ams,as3711.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/ams,as3711.yaml
new file mode 100644
index 000000000000..ad8649cbb2cc
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/ams,as3711.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ams,as3711.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Austria MicroSystems AS3711 Quad Buck High Current PMIC with Charger
+
+maintainers:
+  - Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
+
+description:
+  AS3711 is an I2C PMIC from Austria MicroSystems with multiple DC/DC and LDO
+  power supplies, a battery charger and an RTC.  So far only bindings for the
+  two step-up DC/DC converters are defined.
+
+properties:
+  compatible:
+    const: ams,as3711
+
+  reg:
+    maxItems: 1
+
+  backlight:
+    description:
+      Step-up converter configuration, to be used as a backlight source
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        const: ams,as3711-bl
+
+      su1-dev:
+        description: Framebuffer phandle for the first step-up converter
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      su1-max-uA:
+        description: Maximum current for the first step-up converter
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      su2-dev:
+        description: Framebuffer phandle for the second step-up converter
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      su2-max-uA:
+        description: Maximum current for the second step-up converter
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      su2-feedback-voltage:
+        description: Second step-up converter uses voltage feedback
+        type: boolean
+
+      su2-feedback-curr1:
+        description:
+          Second step-up converter uses CURR1 input for current feedback
+        type: boolean
+
+      su2-feedback-curr2:
+        description:
+          Second step-up converter uses CURR2 input for current feedback
+        type: boolean
+
+      su2-feedback-curr3:
+        description:
+          Second step-up converter uses CURR3 input for current feedback
+        type: boolean
+
+      su2-feedback-curr-auto:
+        description:
+          Second step-up converter uses automatic current feedback selection
+        type: boolean
+
+      su2-fbprot-lx-sd4:
+        description:
+          Second step-up converter uses LX_SD4 for over-voltage protection
+        type: boolean
+
+      su2-fbprot-gpio2:
+        description:
+          Second step-up converter uses GPIO2 for over-voltage protection
+        type: boolean
+
+      su2-fbprot-gpio3:
+        description:
+          Second step-up converter uses GPIO3 for over-voltage protection
+        type: boolean
+
+      su2-fbprot-gpio4:
+        description:
+          Second step-up converter uses GPIO4 for over-voltage protection
+        type: boolean
+
+      su2-auto-curr1:
+        description:
+          Second step-up converter uses CURR1 input for automatic current
+          feedback
+        type: boolean
+
+      su2-auto-curr2:
+        description:
+          Second step-up converter uses CURR2 input for automatic current
+          feedback
+        type: boolean
+
+      su2-auto-curr3:
+        description:
+          Second step-up converter uses CURR3 input for automatic current
+          feedback
+        type: boolean
+
+    required:
+      - compatible
+
+    dependentRequired:
+      # To use the SU1 converter as a backlight source the following two
+      # properties must be provided:
+      su1-dev: [ su1-max-uA ]
+      su1-max-uA: [ su1-dev ]
+
+      # To use the SU2 converter as a backlight source the following two
+      # properties must be provided:
+      su2-dev: [ su2-max-uA ]
+      su2-max-uA: [ su2-dev ]
+
+      su2-feedback-voltage: [ su2-dev ]
+      su2-feedback-curr1: [ su2-dev ]
+      su2-feedback-curr2: [ su2-dev ]
+      su2-feedback-curr3: [ su2-dev ]
+      su2-feedback-curr-auto: [ su2-dev ]
+      su2-fbprot-lx-sd4: [ su2-dev ]
+      su2-fbprot-gpio2: [ su2-dev ]
+      su2-fbprot-gpio3: [ su2-dev ]
+      su2-fbprot-gpio4: [ su2-dev ]
+      su2-auto-curr1: [ su2-feedback-curr-auto ]
+      su2-auto-curr2: [ su2-feedback-curr-auto ]
+      su2-auto-curr3: [ su2-feedback-curr-auto ]
+
+    dependentSchemas:
+      su2-dev:
+        allOf:
+          - oneOf:
+              - required:
+                  - su2-feedback-voltage
+              - required:
+                  - su2-feedback-curr1
+              - required:
+                  - su2-feedback-curr2
+              - required:
+                  - su2-feedback-curr3
+              - required:
+                  - su2-feedback-curr-auto
+          - oneOf:
+              - required:
+                  - su2-fbprot-lx-sd4
+              - required:
+                  - su2-fbprot-gpio2
+              - required:
+                  - su2-fbprot-gpio3
+              - required:
+                  - su2-fbprot-gpio4
+
+      su2-feedback-curr-auto:
+        anyOf:
+          - required:
+              - su2-auto-curr1
+          - required:
+              - su2-auto-curr2
+          - required:
+              - su2-auto-curr3
+
+  regulators:
+    description: Other DC/DC and LDO supplies
+    type: object
+    unevaluatedProperties: false
+    patternProperties:
+      "^(sd[1-4]|ldo[1-8])$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@40 {
+            compatible = "ams,as3711";
+            reg = <0x40>;
+
+            regulators {
+                sd4 {
+                    regulator-name = "1.215V";
+                    regulator-min-microvolt = <1215000>;
+                    regulator-max-microvolt = <1235000>;
+                };
+                ldo2 {
+                    regulator-name = "2.8V CPU";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+
+            backlight {
+                compatible = "ams,as3711-bl";
+                su2-dev = <&lcdc>;
+                su2-max-uA = <36000>;
+                su2-feedback-curr-auto;
+                su2-fbprot-gpio4;
+                su2-auto-curr1;
+                su2-auto-curr2;
+                su2-auto-curr3;
+            };
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/as3711.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/as3711.txt
deleted file mode 100644
index d98cf18c721c..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/as3711.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power
-supplies, a battery charger and an RTC. So far only bindings for the two stepup
-DCDC converters are defined. Other DCDC and LDO supplies are configured, using
-standard regulator properties, they must belong to a sub-node, called
-"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter
-configuration should be placed in a subnode, called "backlight."
-
-Compulsory properties:
-- compatible		: must be "ams,as3711"
-- reg			: specifies the I2C address
-
-To use the SU1 converter as a backlight source the following two properties must
-be provided:
-- su1-dev		: framebuffer phandle
-- su1-max-uA		: maximum current
-
-To use the SU2 converter as a backlight source the following two properties must
-be provided:
-- su2-dev		: framebuffer phandle
-- su1-max-uA		: maximum current
-
-Additionally one of these properties must be provided to select the type of
-feedback used:
-- su2-feedback-voltage	: voltage feedback is used
-- su2-feedback-curr1	: CURR1 input used for current feedback
-- su2-feedback-curr2	: CURR2 input used for current feedback
-- su2-feedback-curr3	: CURR3 input used for current feedback
-- su2-feedback-curr-auto: automatic current feedback selection
-
-and one of these to select the over-voltage protection pin
-- su2-fbprot-lx-sd4	: LX_SD4 is used for over-voltage protection
-- su2-fbprot-gpio2	: GPIO2 is used for over-voltage protection
-- su2-fbprot-gpio3	: GPIO3 is used for over-voltage protection
-- su2-fbprot-gpio4	: GPIO4 is used for over-voltage protection
-
-If "su2-feedback-curr-auto" is selected, one or more of the following properties
-have to be specified:
-- su2-auto-curr1	: use CURR1 input for current feedback
-- su2-auto-curr2	: use CURR2 input for current feedback
-- su2-auto-curr3	: use CURR3 input for current feedback
-
-Example:
-
-as3711@40 {
-	compatible = "ams,as3711";
-	reg = <0x40>;
-
-	regulators {
-		sd4 {
-			regulator-name = "1.215V";
-			regulator-min-microvolt = <1215000>;
-			regulator-max-microvolt = <1235000>;
-		};
-		ldo2 {
-			regulator-name = "2.8V CPU";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-
-	backlight {
-		compatible = "ams,as3711-bl";
-		su2-dev = <&lcdc>;
-		su2-max-uA = <36000>;
-		su2-feedback-curr-auto;
-		su2-fbprot-gpio4;
-		su2-auto-curr1;
-		su2-auto-curr2;
-		su2-auto-curr3;
-	};
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
index bdff5b653453..6a824351834e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -17,7 +17,7 @@ description: |
   node.
 
   The SPMI controller part is provided by
-  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+  Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
 
 properties:
   $nodename:
@@ -42,13 +42,6 @@ properties:
 
     additionalProperties: false
 
-    properties:
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
     patternProperties:
       '^ldo[0-9]+$':
         type: object
@@ -66,72 +59,75 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/spmi/spmi.h>
 
-    pmic: pmic@0 {
-      compatible = "hisilicon,hi6421v600-spmi";
-      reg = <0 0>;
-
-      #interrupt-cells = <2>;
-      interrupt-controller;
-      interrupt-parent = <&gpio28>;
-      interrupts = <0 0>;
-
-      regulators {
-        #address-cells = <1>;
+    spmi {
+        #address-cells = <2>;
         #size-cells = <0>;
 
-        ldo3: ldo3 {
-          regulator-name = "ldo3";
-          regulator-min-microvolt = <1500000>;
-          regulator-max-microvolt = <2000000>;
-          regulator-boot-on;
-        };
-
-        ldo4: ldo4 {
-          regulator-name = "ldo4";
-          regulator-min-microvolt = <1725000>;
-          regulator-max-microvolt = <1900000>;
-          regulator-boot-on;
-        };
-
-        ldo9: ldo9 {
-          regulator-name = "ldo9";
-          regulator-min-microvolt = <1750000>;
-          regulator-max-microvolt = <3300000>;
-          regulator-boot-on;
-        };
-
-        ldo15: ldo15 {
-          regulator-name = "ldo15";
-          regulator-min-microvolt = <1800000>;
-          regulator-max-microvolt = <3000000>;
-          regulator-always-on;
-        };
-
-        ldo16: ldo16 {
-          regulator-name = "ldo16";
-          regulator-min-microvolt = <1800000>;
-          regulator-max-microvolt = <3000000>;
-          regulator-boot-on;
-        };
-
-        ldo17: ldo17 {
-          regulator-name = "ldo17";
-          regulator-min-microvolt = <2500000>;
-          regulator-max-microvolt = <3300000>;
-        };
-
-        ldo33: ldo33 {
-          regulator-name = "ldo33";
-          regulator-min-microvolt = <2500000>;
-          regulator-max-microvolt = <3300000>;
-          regulator-boot-on;
-        };
-
-        ldo34: ldo34 {
-          regulator-name = "ldo34";
-          regulator-min-microvolt = <2600000>;
-          regulator-max-microvolt = <3300000>;
+        pmic@0 {
+            compatible = "hisilicon,hi6421v600-spmi";
+            reg = <0 SPMI_USID>;
+
+            #interrupt-cells = <2>;
+            interrupt-controller;
+            interrupt-parent = <&gpio28>;
+            interrupts = <0 0>;
+
+            regulators {
+                ldo3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <1500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-boot-on;
+                };
+
+                ldo4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <1725000>;
+                    regulator-max-microvolt = <1900000>;
+                    regulator-boot-on;
+                };
+
+                ldo9 {
+                    regulator-name = "ldo9";
+                    regulator-min-microvolt = <1750000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+
+                ldo15 {
+                    regulator-name = "ldo15";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-always-on;
+                };
+
+                ldo16 {
+                    regulator-name = "ldo16";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-boot-on;
+                };
+
+                ldo17 {
+                    regulator-name = "ldo17";
+                    regulator-min-microvolt = <2500000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                ldo33 {
+                    regulator-name = "ldo33";
+                    regulator-min-microvolt = <2500000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+
+                ldo34 {
+                    regulator-name = "ldo34";
+                    regulator-min-microvolt = <2600000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+            };
         };
-      };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index 9e4eed34dae8..0c75d8bde568 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -99,10 +99,12 @@ examples:
   - |
     #include <dt-bindings/mfd/qcom-pm8008.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    qupv3_se13_i2c {
+
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
-      pm8008i@8 {
+
+      pmic@8 {
         compatible = "qcom,pm8008";
         reg = <0x8>;
         #address-cells = <1>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index 9fa568603930..8103fb61a16c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -66,6 +66,7 @@ properties:
           - qcom,pm8841
           - qcom,pm8909
           - qcom,pm8916
+          - qcom,pm8937
           - qcom,pm8941
           - qcom,pm8950
           - qcom,pm8953
@@ -134,9 +135,15 @@ patternProperties:
     type: object
     $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml#
 
+  "^battery@[0-9a-f]+$":
+    type: object
+    oneOf:
+      - $ref: /schemas/power/supply/qcom,pm8916-bms-vm.yaml#
+
   "^charger@[0-9a-f]+$":
     type: object
     oneOf:
+      - $ref: /schemas/power/supply/qcom,pm8916-lbc.yaml#
       - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml#
       - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml#
       - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml#
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index 33c3d023a106..798705ab6a46 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -29,6 +29,8 @@ properties:
           - qcom,sdx65-tcsr
           - qcom,sm4450-tcsr
           - qcom,sm8150-tcsr
+          - qcom,sm8250-tcsr
+          - qcom,sm8350-tcsr
           - qcom,sm8450-tcsr
           - qcom,tcsr-apq8064
           - qcom,tcsr-apq8084
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml
index b97b06848729..f154103f32cc 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml
@@ -85,7 +85,7 @@ examples:
         };
 
         i2s@11440000 {
-            compatible = "samsung,exynos7-i2s";
+            compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s";
             reg = <0x11440000 0x100>;
             dmas = <&adma 0>, <&adma 2>;
             dma-names = "tx", "rx";
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml
index 996bd4a17ca3..a750fa23d7e7 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml
@@ -19,7 +19,9 @@ description:
 properties:
   compatible:
     items:
-      - const: sprd,ums512-glbregs
+      - enum:
+          - sprd,ums512-glbregs
+          - sprd,ums9620-glbregs
       - const: syscon
       - const: simple-mfd
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
index 23a63265be3c..70b5dfce07d2 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
@@ -61,8 +61,6 @@ required:
   - interrupts
   - clocks
   - clock-names
-  - dmas
-  - dma-names
 
 additionalProperties: false
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
index 8cc951feb7df..59b83ea5e05e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
@@ -12,7 +12,7 @@ maintainers:
 
 properties:
   compatible:
-    const: "fsl,dpaa2-console"
+    const: fsl,dpaa2-console
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
index 3e99801f77d2..9075add020bf 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
@@ -226,8 +226,8 @@ examples:
           interrupt-parent = <&gic>;
           interrupts = <0 48 4>;
           reg = <0xff160000 0x1000>;
-          clocks = <&clk200>, <&clk200>;
-          clock-names = "clk_xin", "clk_ahb";
+          clocks = <&clk200>, <&clk200>, <&clk1200>;
+          clock-names = "clk_xin", "clk_ahb", "gate";
           clock-output-names = "clk_out_sd0", "clk_in_sd0";
           #clock-cells = <1>;
           clk-phase-sd-hs = <63>, <72>;
@@ -239,8 +239,8 @@ examples:
           interrupt-parent = <&gic>;
           interrupts = <0 126 4>;
           reg = <0xf1040000 0x10000>;
-          clocks = <&clk200>, <&clk200>;
-          clock-names = "clk_xin", "clk_ahb";
+          clocks = <&clk200>, <&clk200>, <&clk1200>;
+          clock-names = "clk_xin", "clk_ahb", "gate";
           clock-output-names = "clk_out_sd0", "clk_in_sd0";
           #clock-cells = <1>;
           clk-phase-sd-hs = <132>, <60>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index 2459a55ed540..940b12688167 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -203,7 +203,7 @@ examples:
       bus-width = <4>;
       cap-sd-highspeed;
       cap-mmc-highspeed;
-      cd-gpios  = <&gpio2 31 0x4>;
+      cd-gpios = <&gpio2 31 0x4>;
       st,sig-dir-dat0;
       st,sig-dir-dat2;
       st,sig-dir-cmd;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
index c028039bc477..cbd3d6c6c77f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -20,10 +20,8 @@ properties:
           - const: brcm,sdhci-brcmstb
       - items:
           - enum:
+              - brcm,bcm74165b0-sdhci
               - brcm,bcm7445-sdhci
-          - const: brcm,sdhci-brcmstb
-      - items:
-          - enum:
               - brcm,bcm7425-sdhci
           - const: brcm,sdhci-brcmstb
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
index 3a8e74894ae0..cfe6237716f4 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
@@ -27,7 +27,9 @@ properties:
           - marvell,armada-ap806-sdhci
 
       - items:
-          - const: marvell,armada-ap807-sdhci
+          - enum:
+              - marvell,armada-ap807-sdhci
+              - marvell,ac5-sdhci
           - const: marvell,armada-ap806-sdhci
 
       - items:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/mtk-sd.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
index 3fffa467e4e1..c532ec92d2d9 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -145,6 +145,15 @@ properties:
     minimum: 0
     maximum: 7
 
+  mediatek,tuning-step:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Some SoCs need extend tuning step for better delay value to avoid CRC issue.
+      If not present, default tuning step is 32. For eMMC and SD, this can yield
+      satisfactory calibration results in most cases.
+    enum: [32, 64]
+    default: 32
+
   resets:
     maxItems: 1
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
index 94e228787630..f7a4c6bc70f6 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -56,7 +56,7 @@ properties:
               - renesas,sdhi-r8a77980  # R-Car V3H
               - renesas,sdhi-r8a77990  # R-Car E3
               - renesas,sdhi-r8a77995  # R-Car D3
-              - renesas,sdhi-r9a07g043 # RZ/G2UL
+              - renesas,sdhi-r9a07g043 # RZ/G2UL and RZ/Five
               - renesas,sdhi-r9a07g044 # RZ/G2{L,LC}
               - renesas,sdhi-r9a07g054 # RZ/V2L
               - renesas,sdhi-r9a08g045 # RZ/G3S
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
index 6ee78a38bd74..5fe65795f796 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
@@ -14,15 +14,22 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - samsung,exynos4210-dw-mshc
-      - samsung,exynos4412-dw-mshc
-      - samsung,exynos5250-dw-mshc
-      - samsung,exynos5420-dw-mshc
-      - samsung,exynos5420-dw-mshc-smu
-      - samsung,exynos7-dw-mshc
-      - samsung,exynos7-dw-mshc-smu
-      - axis,artpec8-dw-mshc
+    oneOf:
+      - enum:
+          - axis,artpec8-dw-mshc
+          - samsung,exynos4210-dw-mshc
+          - samsung,exynos4412-dw-mshc
+          - samsung,exynos5250-dw-mshc
+          - samsung,exynos5420-dw-mshc
+          - samsung,exynos5420-dw-mshc-smu
+          - samsung,exynos7-dw-mshc
+          - samsung,exynos7-dw-mshc-smu
+      - items:
+          - enum:
+              - samsung,exynos5433-dw-mshc-smu
+              - samsung,exynos7885-dw-mshc-smu
+              - samsung,exynos850-dw-mshc-smu
+          - const: samsung,exynos7-dw-mshc-smu
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index 86fae733d9a0..c24c537f62b1 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -22,6 +22,8 @@ properties:
       - items:
           - enum:
               - qcom,apq8084-sdhci
+              - qcom,ipq4019-sdhci
+              - qcom,ipq8074-sdhci
               - qcom,msm8226-sdhci
               - qcom,msm8953-sdhci
               - qcom,msm8974-sdhci
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
index 09455f9fa8de..4869ddef36fd 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
@@ -18,7 +18,7 @@ allOf:
             const: marvell,armada-380-sdhci
     then:
       properties:
-        regs:
+        reg:
           minItems: 3
         reg-names:
           minItems: 3
@@ -26,7 +26,7 @@ allOf:
         - reg-names
     else:
       properties:
-        regs:
+        reg:
           maxItems: 1
         reg-names:
           maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
index a43eb837f8da..42804d955293 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
@@ -19,6 +19,7 @@ properties:
       - rockchip,rk3568-dwcmshc
       - rockchip,rk3588-dwcmshc
       - snps,dwcmshc-sdhci
+      - thead,th1520-dwcmshc
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
index b13b5166d20a..a6292777e376 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
@@ -35,6 +35,9 @@ properties:
       - const: biu
       - const: ciu
 
+  iommus:
+    maxItems: 1
+
   altr,sysmgr-syscon:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
@@ -62,6 +65,7 @@ allOf:
         altr,sysmgr-syscon: true
     else:
       properties:
+        iommus: false
         altr,sysmgr-syscon: false
 
 required:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml
index 3c56efe48efd..327fa872c001 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: U-Boot bootloader partition
 
 description: |
-  U-Boot is a bootlodaer commonly used in embedded devices. It's almost always
+  U-Boot is a bootloader commonly used in embedded devices. It's almost always
   located on some kind of flash device.
 
   Device configuration is stored as a set of environment variables that are
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/dsa/dsa.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index 6107189d276a..2abd036578d1 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -46,4 +46,10 @@ $defs:
             $ref: dsa-port.yaml#
             unevaluatedProperties: false
 
+oneOf:
+  - required:
+      - ports
+  - required:
+      - ethernet-ports
+
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml
new file mode 100644
index 000000000000..4f1adf00431a
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MV88E6060 DSA switch
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description:
+  The Marvell MV88E6060 switch has been produced and sold by Marvell
+  since at least 2008. The switch has one pin ADDR4 that controls the
+  MDIO address of the switch to be 0x10 or 0x00, and on the MDIO bus
+  connected to the switch, the PHYs inside the switch appear as
+  independent devices on address 0x00-0x04 or 0x10-0x14, so in difference
+  from many other DSA switches this switch does not have an internal
+  MDIO bus for the PHY devices.
+
+properties:
+  compatible:
+    const: marvell,mv88e6060
+    description:
+      The MV88E6060 is the oldest Marvell DSA switch product, and
+      as such a bit limited in features compared to later hardware.
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO to be used to reset the whole device
+    maxItems: 1
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-switch@16 {
+            compatible = "marvell,mv88e6060";
+            reg = <16>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ethernet-port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                ethernet-port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                ethernet-port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                ethernet-port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                ethernet-port@5 {
+                    reg = <5>;
+                    phy-mode = "rev-mii";
+                    ethernet = <&ethc>;
+                    fixed-link {
+                        speed = <100>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml
new file mode 100644
index 000000000000..19f15bdd1c97
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml
@@ -0,0 +1,337 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MV88E6xxx DSA switch family
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description:
+  The Marvell MV88E6xxx switch series has been produced and sold
+  by Marvell since at least 2008. The switch has a few compatibles which
+  just indicate the base address of the switch, then operating systems
+  can investigate switch ID registers to find out which actual version
+  of the switch it is dealing with.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,mv88e6085
+          - marvell,mv88e6190
+          - marvell,mv88e6250
+        description: |
+          marvell,mv88e6085: This switch uses base address 0x10.
+            This switch and its siblings will be autodetected from
+            ID registers found in the switch, so only "marvell,mv88e6085" should be
+            specified. This includes the following list of MV88Exxxx switches:
+            6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, 6171, 6172, 6175, 6176,
+            6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352
+          marvell,mv88e6190: This switch uses base address 0x00.
+            This switch and its siblings will be autodetected from
+            ID registers found in the switch, so only "marvell,mv88e6190" should be
+            specified. This includes the following list of MV88Exxxx switches:
+            6190, 6190X, 6191, 6290, 6361, 6390, 6390X
+          marvell,mv88e6250: This switch uses base address 0x08 or 0x18.
+            This switch and its siblings will be autodetected from
+            ID registers found in the switch, so only "marvell,mv88e6250" should be
+            specified. This includes the following list of MV88Exxxx switches:
+            6220, 6250
+      - items:
+          - const: marvell,turris-mox-mv88e6085
+          - const: marvell,mv88e6085
+      - items:
+          - const: marvell,turris-mox-mv88e6190
+          - const: marvell,mv88e6190
+
+  reg:
+    maxItems: 1
+
+  eeprom-length:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Set to the length of an EEPROM connected to the switch. Must be
+      set if the switch can not detect the presence and/or size of a connected
+      EEPROM, otherwise optional.
+
+  reset-gpios:
+    description:
+      GPIO to be used to reset the whole device
+    maxItems: 1
+
+  interrupts:
+    description: The switch provides an external interrupt line, but it is
+      not always used by target systems.
+    maxItems: 1
+
+  interrupt-controller:
+    description: The switch has an internal interrupt controller used by
+      the different sub-blocks.
+
+  '#interrupt-cells':
+    description: The internal interrupt controller only supports triggering
+      on active high level interrupts so the second cell must alway be set to
+      IRQ_TYPE_LEVEL_HIGH.
+    const: 2
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+    description: Marvell MV88E6xxx switches have an varying combination of
+      internal and external MDIO buses, in some cases a combined bus that
+      can be used both internally and externally. This node is for the
+      primary bus, used internally and sometimes also externally.
+
+  mdio-external:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+    description: Marvell MV88E6xxx switches that have a separate external
+      MDIO bus use this port to access external components on the MDIO bus.
+
+    properties:
+      compatible:
+        const: marvell,mv88e6xxx-mdio-external
+
+    required:
+      - compatible
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-switch@0 {
+            compatible = "marvell,mv88e6085";
+            reg = <0>;
+            reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                sw_phy0: ethernet-phy@0 {
+                    reg = <0x0>;
+                };
+
+                sw_phy1: ethernet-phy@1 {
+                    reg = <0x1>;
+                };
+
+                sw_phy2: ethernet-phy@2 {
+                    reg = <0x2>;
+                };
+
+                sw_phy3: ethernet-phy@3 {
+                    reg = <0x3>;
+                };
+            };
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ethernet-port@0 {
+                    reg = <0>;
+                    label = "lan4";
+                    phy-handle = <&sw_phy0>;
+                    phy-mode = "internal";
+                };
+
+                ethernet-port@1 {
+                    reg = <1>;
+                    label = "lan3";
+                    phy-handle = <&sw_phy1>;
+                    phy-mode = "internal";
+                };
+
+                ethernet-port@2 {
+                    reg = <2>;
+                    label = "lan2";
+                    phy-handle = <&sw_phy2>;
+                    phy-mode = "internal";
+                };
+
+                ethernet-port@3 {
+                    reg = <3>;
+                    label = "lan1";
+                    phy-handle = <&sw_phy3>;
+                    phy-mode = "internal";
+                };
+
+                ethernet-port@5 {
+                    reg = <5>;
+                    ethernet = <&fec>;
+                    phy-mode = "rgmii-id";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-switch@0 {
+            compatible = "marvell,mv88e6190";
+            #interrupt-cells = <2>;
+            interrupt-controller;
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-0 = <&switch_interrupt_pins>;
+            pinctrl-names = "default";
+            reg = <0>;
+
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                switch0phy1: ethernet-phy@1 {
+                    reg = <0x1>;
+                };
+
+                switch0phy2: ethernet-phy@2 {
+                    reg = <0x2>;
+                };
+
+                switch0phy3: ethernet-phy@3 {
+                    reg = <0x3>;
+                };
+
+                switch0phy4: ethernet-phy@4 {
+                    reg = <0x4>;
+                };
+
+                switch0phy5: ethernet-phy@5 {
+                    reg = <0x5>;
+                };
+
+                switch0phy6: ethernet-phy@6 {
+                    reg = <0x6>;
+                };
+
+                switch0phy7: ethernet-phy@7 {
+                    reg = <0x7>;
+                };
+
+                switch0phy8: ethernet-phy@8 {
+                    reg = <0x8>;
+                };
+            };
+
+            mdio-external {
+                compatible = "marvell,mv88e6xxx-mdio-external";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                phy1: ethernet-phy@b {
+                    reg = <0xb>;
+                    compatible = "ethernet-phy-ieee802.3-c45";
+                };
+
+                phy2: ethernet-phy@c {
+                    reg = <0xc>;
+                    compatible = "ethernet-phy-ieee802.3-c45";
+                };
+            };
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ethernet-port@0 {
+                    ethernet = <&eth0>;
+                    phy-mode = "rgmii";
+                    reg = <0>;
+
+                    fixed-link {
+                        full-duplex;
+                        pause;
+                        speed = <1000>;
+                    };
+                };
+
+                ethernet-port@1 {
+                    label = "lan1";
+                    phy-handle = <&switch0phy1>;
+                    reg = <1>;
+                };
+
+                ethernet-port@2 {
+                    label = "lan2";
+                    phy-handle = <&switch0phy2>;
+                    reg = <2>;
+                };
+
+                ethernet-port@3 {
+                    label = "lan3";
+                    phy-handle = <&switch0phy3>;
+                    reg = <3>;
+                };
+
+                ethernet-port@4 {
+                    label = "lan4";
+                    phy-handle = <&switch0phy4>;
+                    reg = <4>;
+                };
+
+                ethernet-port@5 {
+                    label = "lan5";
+                    phy-handle = <&switch0phy5>;
+                    reg = <5>;
+                };
+
+                ethernet-port@6 {
+                    label = "lan6";
+                    phy-handle = <&switch0phy6>;
+                    reg = <6>;
+                };
+
+                ethernet-port@7 {
+                    label = "lan7";
+                    phy-handle = <&switch0phy7>;
+                    reg = <7>;
+                };
+
+                ethernet-port@8 {
+                    label = "lan8";
+                    phy-handle = <&switch0phy8>;
+                    reg = <8>;
+                };
+
+                ethernet-port@9 {
+                    /* 88X3310P external phy */
+                    label = "lan9";
+                    phy-handle = <&phy1>;
+                    phy-mode = "xaui";
+                    reg = <9>;
+                };
+
+                ethernet-port@a {
+                    /* 88X3310P external phy */
+                    label = "lan10";
+                    phy-handle = <&phy2>;
+                    phy-mode = "xaui";
+                    reg = <0xa>;
+                };
+            };
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/dsa/marvell.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/marvell.txt
deleted file mode 100644
index 6ec0c181b6db..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ /dev/null
@@ -1,109 +0,0 @@
-Marvell DSA Switch Device Tree Bindings
----------------------------------------
-
-WARNING: This binding is currently unstable. Do not program it into a
-FLASH never to be changed again. Once this binding is stable, this
-warning will be removed.
-
-If you need a stable binding, use the old dsa.txt binding.
-
-Marvell Switches are MDIO devices. The following properties should be
-placed as a child node of an mdio device.
-
-The properties described here are those specific to Marvell devices.
-Additional required and optional properties can be found in dsa.txt.
-
-The compatibility string is used only to find an identification register,
-which is at a different MDIO base address in different switch families.
-- "marvell,mv88e6085"	: Switch has base address 0x10. Use with models:
-			  6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165,
-			  6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321,
-			  6341, 6350, 6351, 6352
-- "marvell,mv88e6190"	: Switch has base address 0x00. Use with models:
-			  6190, 6190X, 6191, 6290, 6361, 6390, 6390X
-- "marvell,mv88e6250"	: Switch has base address 0x08 or 0x18. Use with model:
-			  6220, 6250
-
-Required properties:
-- compatible		: Should be one of "marvell,mv88e6085",
-			  "marvell,mv88e6190" or "marvell,mv88e6250" as
-			  indicated above
-- reg			: Address on the MII bus for the switch.
-
-Optional properties:
-
-- reset-gpios		: Should be a gpio specifier for a reset line
-- interrupts		: Interrupt from the switch
-- interrupt-controller	: Indicates the switch is itself an interrupt
-			  controller. This is used for the PHY interrupts.
-#interrupt-cells = <2>	: Controller uses two cells, number and flag
-- eeprom-length		: Set to the length of an EEPROM connected to the
-			  switch. Must be set if the switch can not detect
-			  the presence and/or size of a connected EEPROM,
-			  otherwise optional.
-- mdio			: Container of PHY and devices on the switches MDIO
-			  bus.
-- mdio?		: Container of PHYs and devices on the external MDIO
-			  bus. The node must contains a compatible string of
-			  "marvell,mv88e6xxx-mdio-external"
-
-Example:
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		switch0: switch@0 {
-			compatible = "marvell,mv88e6085";
-			reg = <0>;
-			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				switch1phy0: switch1phy0@0 {
-					reg = <0>;
-					interrupt-parent = <&switch0>;
-					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-		};
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		switch0: switch@0 {
-			compatible = "marvell,mv88e6190";
-			reg = <0>;
-			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				switch1phy0: switch1phy0@0 {
-					reg = <0>;
-					interrupt-parent = <&switch0>;
-					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-
-			mdio1 {
-				compatible = "marvell,mv88e6xxx-mdio-external";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				switch1phy9: switch1phy0@9 {
-					reg = <9>;
-				};
-			};
-		};
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index b3029c64d0d5..c963dc09e8e1 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -11,7 +11,6 @@ maintainers:
   - Woojung Huh <Woojung.Huh@microchip.com>
 
 allOf:
-  - $ref: dsa.yaml#/$defs/ethernet-ports
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
@@ -78,6 +77,39 @@ required:
   - compatible
   - reg
 
+if:
+  not:
+    properties:
+      compatible:
+        enum:
+          - microchip,ksz8863
+          - microchip,ksz8873
+then:
+  $ref: dsa.yaml#/$defs/ethernet-ports
+else:
+  patternProperties:
+    "^(ethernet-)?ports$":
+      patternProperties:
+        "^(ethernet-)?port@[0-2]$":
+          $ref: dsa-port.yaml#
+          unevaluatedProperties: false
+          properties:
+            microchip,rmii-clk-internal:
+              $ref: /schemas/types.yaml#/definitions/flag
+              description:
+                When ksz88x3 is acting as clock provier (via REFCLKO) it
+                can select between internal and external RMII reference
+                clock. Internal reference clock means that the clock for
+                the RMII of ksz88x3 is provided by the ksz88x3 internally
+                and the REFCLKI pin is unconnected. For the external
+                reference clock, the clock needs to be fed back to ksz88x3
+                via REFCLKI.
+                If microchip,rmii-clk-internal is set, ksz88x3 will provide
+                rmii reference clock internally, otherwise reference clock
+                should be provided externally.
+          dependencies:
+            microchip,rmii-clk-internal: [ethernet]
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/ethernet-switch.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/ethernet-switch.yaml
index 72ac67ca3415..b3b7e1a1b127 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/ethernet-switch.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/ethernet-switch.yaml
@@ -20,9 +20,26 @@ description:
 
 select: false
 
-properties:
-  $nodename:
-    pattern: "^(ethernet-)?switch(@.*)?$"
+allOf:
+  # This condition is here to satisfy the case where certain device
+  # nodes have to preserve non-standard names because of
+  # backward-compatibility with boot loaders inspecting certain
+  # node names.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,turris-mox-mv88e6085
+              - marvell,turris-mox-mv88e6190
+    then:
+      properties:
+        $nodename:
+          pattern: "switch[0-3]@[0-3]+$"
+    else:
+      properties:
+        $nodename:
+          pattern: "^(ethernet-)?switch(@.*)?$"
 
 patternProperties:
   "^(ethernet-)?ports$":
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml
new file mode 100644
index 000000000000..7da8370e2468
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/lantiq,pef2256.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq PEF2256
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and
+  line interface component designed to fulfill all required interfacing between
+  an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus.
+
+properties:
+  compatible:
+    items:
+      - const: lantiq,pef2256
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Master Clock
+      - description: System Clock Receive
+      - description: System Clock Transmit
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: sclkr
+      - const: sclkx
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO used to reset the device.
+    maxItems: 1
+
+  pinctrl:
+    $ref: /schemas/pinctrl/pinctrl.yaml#
+    additionalProperties: false
+
+    patternProperties:
+      '-pins$':
+        type: object
+        $ref: /schemas/pinctrl/pinmux-node.yaml#
+        additionalProperties: false
+
+        properties:
+          pins:
+            enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ]
+
+          function:
+            enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS,
+                    SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT,
+                    GPI, GPOH, GPOL ]
+
+        required:
+          - pins
+          - function
+
+  lantiq,data-rate-bps:
+    enum: [2048000, 4096000, 8192000, 16384000]
+    default: 2048000
+    description:
+      Data rate (bit per seconds) on the system highway.
+
+  lantiq,clock-falling-edge:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Data is sent on falling edge of the clock (and received on the rising
+      edge). If 'clock-falling-edge' is not present, data is sent on the
+      rising edge (and received on the falling edge).
+
+  lantiq,channel-phase:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 0
+    description: |
+      The pef2256 delivers a full frame (32 8-bit time-slots in E1 and 24 8-bit
+      time-slots 8 8-bit signaling in E1/J1) every 125us. This lead to a data
+      rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000
+      bit/s, the data (all 32 8-bit) present in the frame are interleave with
+      unused time-slots. The lantiq,channel-phase property allows to set the
+      correct alignment of the interleave mechanism.
+      For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and
+      lantiq,channel-phase = 2, the interleave schema with unused time-slots
+      (nu) and used time-slots (XX) for TSi is
+        nu nu XX nu nu nu XX nu nu nu XX nu
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+      With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the
+      interleave schema is
+        nu XX nu nu nu XX nu nu nu XX nu nu
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+      With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and
+      lantiq,channel-phase = 1, the interleave schema is
+        nu    XX    nu    XX    nu    XX
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+
+patternProperties:
+  '^codec(-([0-9]|[1-2][0-9]|3[0-1]))?$':
+    type: object
+    $ref: /schemas/sound/dai-common.yaml
+    unevaluatedProperties: false
+    description:
+      Codec provided by the pef2256. This codec allows to use some of the PCM
+      system highway time-slots as audio channels to transport audio data over
+      the E1/T1/J1 lines.
+      The time-slots used by the codec must be set and so, the properties
+      'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
+      'dai-tdm-slot-rx-mask' must be present in the sound card node for
+      sub-nodes that involve the codec. The codec uses 8-bit time-slots.
+      'dai-tdm-tdm-slot-with' must be set to 8.
+      The tx and rx masks define the pef2256 time-slots assigned to the codec.
+
+    properties:
+      compatible:
+        const: lantiq,pef2256-codec
+
+      '#sound-dai-cells':
+        const: 0
+
+    required:
+      - compatible
+      - '#sound-dai-cells'
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pef2256: framer@2000000 {
+      compatible = "lantiq,pef2256";
+      reg = <0x2000000 0x100>;
+      interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+      interrupt-parent = <&intc>;
+      clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>;
+      clock-names = "mclk", "sclkr", "sclkx";
+      reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+      lantiq,data-rate-bps = <4096000>;
+
+      pinctrl {
+        pef2256_rpa_sypr: rpa-pins {
+          pins = "RPA";
+          function = "SYPR";
+        };
+        pef2256_xpa_sypx: xpa-pins {
+          pins = "XPA";
+          function = "SYPX";
+        };
+      };
+
+      pef2256_codec0: codec-0 {
+        compatible = "lantiq,pef2256-codec";
+        #sound-dai-cells = <0>;
+        sound-name-prefix = "PEF2256_0";
+      };
+
+      pef2256_codec1: codec-1 {
+        compatible = "lantiq,pef2256-codec";
+        #sound-dai-cells = <0>;
+        sound-name-prefix = "PEF2256_1";
+      };
+    };
+
+    sound {
+      compatible = "simple-audio-card";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      simple-audio-card,dai-link@0 { /* CPU DAI1 - pef2256 codec 1 */
+        reg = <0>;
+        cpu {
+          sound-dai = <&cpu_dai1>;
+        };
+        codec {
+          sound-dai = <&pef2256_codec0>;
+          dai-tdm-slot-num = <4>;
+          dai-tdm-slot-width = <8>;
+          /* TS 1, 2, 3, 4 */
+          dai-tdm-slot-tx-mask = <0 1 1 1 1>;
+          dai-tdm-slot-rx-mask = <0 1 1 1 1>;
+        };
+      };
+      simple-audio-card,dai-link@1 { /* CPU DAI2 - pef2256 codec 2 */
+        reg = <1>;
+        cpu {
+          sound-dai = <&cpu_dai2>;
+        };
+        codec {
+          sound-dai = <&pef2256_codec1>;
+          dai-tdm-slot-num = <4>;
+          dai-tdm-slot-width = <8>;
+          /* TS 5, 6, 7, 8 */
+          dai-tdm-slot-tx-mask = <0 0 0 0 0 1 1 1 1>;
+          dai-tdm-slot-rx-mask = <0 0 0 0 0 1 1 1 1>;
+        };
+      };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/marvell,aquantia.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/marvell,aquantia.yaml
new file mode 100644
index 000000000000..6e64493d7623
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/marvell,aquantia.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,aquantia.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Aquantia Ethernet PHY
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description: |
+  Marvell Aquantia Ethernet PHY require a firmware to be loaded to actually
+  work.
+
+  This can be done and is implemented by OEM in 3 different way:
+    - Attached SPI flash directly to the PHY with the firmware. The PHY
+      will self load the firmware in the presence of this configuration.
+    - Read from a dedicated partition on system NAND declared in an
+      NVMEM cell, and loaded to the PHY using its mailbox interface.
+    - Manually provided firmware loaded from a file in the filesystem.
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ethernet-phy-id03a1.b445
+          - ethernet-phy-id03a1.b460
+          - ethernet-phy-id03a1.b4a2
+          - ethernet-phy-id03a1.b4d0
+          - ethernet-phy-id03a1.b4e0
+          - ethernet-phy-id03a1.b5c2
+          - ethernet-phy-id03a1.b4b0
+          - ethernet-phy-id03a1.b662
+          - ethernet-phy-id03a1.b712
+          - ethernet-phy-id31c3.1c12
+  required:
+    - compatible
+
+properties:
+  reg:
+    maxItems: 1
+
+  firmware-name:
+    description: specify the name of PHY firmware to load
+
+  nvmem-cells:
+    description: phandle to the firmware nvmem cell
+    maxItems: 1
+
+  nvmem-cell-names:
+    const: firmware
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            compatible = "ethernet-phy-id31c3.1c12",
+                         "ethernet-phy-ieee802.3-c45";
+
+            reg = <0>;
+            firmware-name = "/*(DEBLOBBED)*/";
+        };
+
+        ethernet-phy@1 {
+            compatible = "ethernet-phy-id31c3.1c12",
+                         "ethernet-phy-ieee802.3-c45";
+
+            reg = <1>;
+            nvmem-cells = <&aqr_fw>;
+            nvmem-cell-names = "firmware";
+        };
+    };
+
+    flash {
+        compatible = "jedec,spi-nor";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partitions {
+            compatible = "fixed-partitions";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            /* ... */
+
+            partition@650000 {
+                compatible = "nvmem-cells";
+                label = "0:ethphyfw";
+                reg = <0x650000 0x80000>;
+                read-only;
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                aqr_fw: aqr_fw@0 {
+                    reg = <0x0 0x5f42a>;
+                };
+            };
+
+            /* ... */
+
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/marvell,mvusb.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
index 3a3325168048..ab838c1ffeed 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
@@ -50,11 +50,14 @@ examples:
                     #address-cells = <1>;
                     #size-cells = <0>;
 
-                    switch@0 {
+                    ethernet-switch@0 {
                             compatible = "marvell,mv88e6190";
                             reg = <0x0>;
 
-                            ports {
+                            ethernet-ports {
+                                    #address-cells = <1>;
+                                    #size-cells = <0>;
+
                                     /* Port definitions */
                             };
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
index e35da8b01dc2..73429855d584 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
@@ -39,28 +39,6 @@ required:
 allOf:
   - $ref: mdio.yaml#
 
-  - if:
-      required:
-        - interrupts
-
-    then:
-      properties:
-        reg:
-          items:
-            - items:
-                - $ref: /schemas/types.yaml#/definitions/cell
-                - const: 0x84
-
-    else:
-      properties:
-        reg:
-          items:
-            - items:
-                - $ref: /schemas/types.yaml#/definitions/cell
-                - enum:
-                    - 0x4
-                    - 0x10
-
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/marvell,prestera.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/marvell,prestera.yaml
index 5ea8b73663a5..16ff892f7bbd 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/marvell,prestera.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/marvell,prestera.yaml
@@ -78,8 +78,8 @@ examples:
     pcie@0 {
         #address-cells = <3>;
         #size-cells = <2>;
-        ranges = <0x0 0x0 0x0 0x0 0x0 0x0>;
-        reg = <0x0 0x0 0x0 0x0 0x0 0x0>;
+        ranges = <0x02000000 0x0 0x100000 0x10000000 0x0 0x0>;
+        reg = <0x0 0x1000>;
         device_type = "pci";
 
         switch@0,0 {
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
index 66a95191bd77..1bacc0eeff75 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
@@ -15,15 +15,22 @@ description:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - mediatek,mt7622-sgmiisys
-          - mediatek,mt7629-sgmiisys
-          - mediatek,mt7981-sgmiisys_0
-          - mediatek,mt7981-sgmiisys_1
-          - mediatek,mt7986-sgmiisys_0
-          - mediatek,mt7986-sgmiisys_1
-      - const: syscon
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7622-sgmiisys
+              - mediatek,mt7629-sgmiisys
+              - mediatek,mt7981-sgmiisys_0
+              - mediatek,mt7981-sgmiisys_1
+              - mediatek,mt7986-sgmiisys_0
+              - mediatek,mt7986-sgmiisys_1
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt7988-sgmiisys0
+              - mediatek,mt7988-sgmiisys1
+          - const: simple-mfd
+          - const: syscon
 
   reg:
     maxItems: 1
@@ -35,11 +42,51 @@ properties:
     description: Invert polarity of the SGMII data lanes
     type: boolean
 
+  pcs:
+    type: object
+    description: MediaTek LynxI HSGMII PCS
+    properties:
+      compatible:
+        const: mediatek,mt7988-sgmii
+
+      clocks:
+        maxItems: 3
+
+      clock-names:
+        items:
+          - const: sgmii_sel
+          - const: sgmii_tx
+          - const: sgmii_rx
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
   - '#clock-cells'
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7988-sgmiisys0
+              - mediatek,mt7988-sgmiisys1
+
+    then:
+      required:
+        - pcs
+
+    else:
+      properties:
+        pcs: false
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 10f91f73e548..518176bb9d48 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -43,15 +43,21 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,msm8998-ipa
-      - qcom,sc7180-ipa
-      - qcom,sc7280-ipa
-      - qcom,sdm845-ipa
-      - qcom,sdx55-ipa
-      - qcom,sdx65-ipa
-      - qcom,sm6350-ipa
-      - qcom,sm8350-ipa
+    oneOf:
+      - enum:
+          - qcom,msm8998-ipa
+          - qcom,sc7180-ipa
+          - qcom,sc7280-ipa
+          - qcom,sdm845-ipa
+          - qcom,sdx55-ipa
+          - qcom,sdx65-ipa
+          - qcom,sm6350-ipa
+          - qcom,sm8350-ipa
+          - qcom,sm8550-ipa
+      - items:
+          - enum:
+              - qcom,sm8650-ipa
+          - const: qcom,sm8550-ipa
 
   reg:
     items:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/renesas,etheravb.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
index 5d074f27d462..890f7858d0dc 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
@@ -55,9 +55,10 @@ properties:
 
       - items:
           - enum:
-              - renesas,r9a07g043-gbeth # RZ/G2UL
+              - renesas,r9a07g043-gbeth # RZ/G2UL and RZ/Five
               - renesas,r9a07g044-gbeth # RZ/G2{L,LC}
               - renesas,r9a07g054-gbeth # RZ/V2L
+              - renesas,r9a08g045-gbeth # RZ/G3S
           - const: renesas,rzg2l-gbeth  # RZ/{G2L,G2UL,V2L} family
 
   reg: true
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml
new file mode 100644
index 000000000000..ea35d19be829
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,ethertsn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet TSN End-station
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The RTSN device provides Ethernet network using a 10 Mbps, 100 Mbps, or 1
+  Gbps full-duplex link via MII/GMII/RMII/RGMII. Depending on the connected PHY.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a779g0-ethertsn       # R-Car V4H
+      - const: renesas,rcar-gen4-ethertsn
+
+  reg:
+    items:
+      - description: TSN End Station target
+      - description: generalized Precision Time Protocol target
+
+  reg-names:
+    items:
+      - const: tsnes
+      - const: gptp
+
+  interrupts:
+    items:
+      - description: TX data interrupt
+      - description: RX data interrupt
+
+  interrupt-names:
+    items:
+      - const: tx
+      - const: rx
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phy-mode:
+    contains:
+      enum:
+        - mii
+        - rgmii
+
+  phy-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies a reference to a node representing a PHY device.
+
+  rx-internal-delay-ps:
+    enum: [0, 1800]
+    default: 0
+
+  tx-internal-delay-ps:
+    enum: [0, 2000]
+    default: 0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - power-domains
+  - resets
+  - phy-mode
+  - phy-handle
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779g0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779g0-sysc.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    tsn0: ethernet@e6460000 {
+        compatible = "renesas,r8a779g0-ethertsn", "renesas,rcar-gen4-ethertsn";
+        reg = <0xe6460000 0x7000>,
+              <0xe6449000 0x500>;
+        reg-names = "tsnes", "gptp";
+        interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "tx", "rx";
+        clocks = <&cpg CPG_MOD 2723>;
+        power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+        resets = <&cpg 2723>;
+
+        phy-mode = "rgmii";
+        tx-internal-delay-ps = <2000>;
+        phy-handle = <&phy3>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy3: ethernet-phy@3 {
+            compatible = "ethernet-phy-ieee802.3-c45";
+            reg = <0>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/sff,sfp.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/sff,sfp.yaml
index 973e478a399d..bf6cbc7c2ba3 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/sff,sfp.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/sff,sfp.yaml
@@ -120,7 +120,7 @@ examples:
       pinctrl-names = "default";
       pinctrl-0 = <&cps_sfpp0_pins>;
       tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
-      tx-fault-gpios  = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
+      tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
     };
 
     mdio {
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
index 1d33d80af11c..bbe89ea9590c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
@@ -122,6 +122,20 @@ properties:
       and "phy-handle" should point to an external PHY if exists.
     maxItems: 1
 
+  dmas:
+    minItems: 2
+    maxItems: 32
+    description: TX and RX DMA channel phandle
+
+  dma-names:
+    items:
+      pattern: "^[tr]x_chan([0-9]|1[0-5])$"
+    description:
+      Should be "tx_chan0", "tx_chan1" ... "tx_chan15" for DMA Tx channel
+      Should be "rx_chan0", "rx_chan1" ... "rx_chan15" for DMA Rx channel
+    minItems: 2
+    maxItems: 32
+
 required:
   - compatible
   - interrupts
@@ -143,6 +157,8 @@ examples:
         clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
         phy-mode = "mii";
         reg = <0x40c00000 0x40000>,<0x50c00000 0x40000>;
+        dmas = <&xilinx_dma 0>, <&xilinx_dma 1>;
+        dma-names = "tx_chan0", "rx_chan0";
         xlnx,rxcsum = <0x2>;
         xlnx,rxmem = <0x800>;
         xlnx,txcsum = <0x2>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
index a69de3e92282..92bfe25f0571 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
@@ -24,6 +24,7 @@ properties:
       - st,stm32f4-otp
       - st,stm32mp13-bsec
       - st,stm32mp15-bsec
+      - st,stm32mp25-bsec
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 7e15aae7d69e..22491f7f8852 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -64,6 +64,24 @@ properties:
 
   aspm-no-l0s: true
 
+  brcm,clkreq-mode:
+    description: A string that determines the operating
+      clkreq mode of the PCIe RC HW with respect to controlling the refclk
+      signal.  There are three different modes -- "safe", which drives the
+      refclk signal unconditionally and will work for all devices but does
+      not provide any power savings; "no-l1ss" -- which provides Clock
+      Power Management, L0s, and L1, but cannot provide L1 substate (L1SS)
+      power savings. If the downstream device connected to the RC is L1SS
+      capable AND the OS enables L1SS, all PCIe traffic may abruptly halt,
+      potentially hanging the system; "default" -- which provides L0s, L1,
+      and L1SS, but not compliant to provide Clock Power Management;
+      specifically, may not be able to meet the T_CLRon max timing of 400ns
+      as specified in "Dynamic Clock Control", section 3.2.5.2.2 PCI
+      Express Mini CEM 2.1 specification.  This situation is atypical and
+      should happen only with older devices.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ safe, no-l1ss, default ]
+
   brcm,scb-sizes:
     description: u64 giving the 64bit PCIe memory
       viewport size of a memory controller.  There may be up to
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/qcom,pcie.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index eadba38171e1..a93ab3b54066 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -41,6 +41,10 @@ properties:
           - qcom,pcie-sm8450-pcie0
           - qcom,pcie-sm8450-pcie1
           - qcom,pcie-sm8550
+      - items:
+          - enum:
+              - qcom,pcie-sm8650
+          - const: qcom,pcie-sm8550
       - items:
           - const: qcom,pcie-msm8998
           - const: qcom,pcie-msm8996
@@ -62,7 +66,8 @@ properties:
     maxItems: 8
 
   iommu-map:
-    maxItems: 2
+    minItems: 1
+    maxItems: 16
 
   # Common definitions for clocks, clock-names and reset.
   # Platform constraints are described later.
@@ -88,7 +93,7 @@ properties:
     minItems: 1
     maxItems: 12
 
-  resets-names:
+  reset-names:
     minItems: 1
     maxItems: 12
 
@@ -478,6 +483,33 @@ allOf:
           items:
             - const: pci # PCIe core reset
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8180x
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ref # REFERENCE clock
+            - const: tbu # PCIe TBU clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
   - if:
       properties:
         compatible:
@@ -526,8 +558,33 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,pcie-sc8180x
               - qcom,pcie-sm8150
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: tbu # PCIe TBU clock
+            - const: ref # REFERENCE clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,pcie-sm8250
     then:
       oneOf:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
index 8fdfbc763d70..b6a7cb32f61e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -68,6 +68,15 @@ properties:
   phy-names:
     const: pcie
 
+  vpcie1v5-supply:
+    description: The 1.5v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
 required:
   - compatible
   - reg
@@ -121,5 +130,7 @@ examples:
              clock-names = "pcie", "pcie_bus";
              power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
              resets = <&cpg 319>;
+             vpcie3v3-supply = <&pcie_3v3>;
+             vpcie12v-supply = <&pcie_12v>;
          };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
index 1ae8dcfa072c..5f719218c472 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -49,6 +49,7 @@ properties:
       - description: APB clock for PCIe
       - description: Auxiliary clock for PCIe
       - description: PIPE clock
+      - description: Reference clock for PCIe
 
   clock-names:
     minItems: 5
@@ -59,6 +60,7 @@ properties:
       - const: pclk
       - const: aux
       - const: pipe
+      - const: ref
 
   interrupts:
     items:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
index 62292185fe2e..97f2579ea908 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
@@ -10,13 +10,11 @@ title: TI J721E PCI EP (PCIe Wrapper)
 maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
 
-allOf:
-  - $ref: cdns-pcie-ep.yaml#
-
 properties:
   compatible:
     oneOf:
       - const: ti,j721e-pcie-ep
+      - const: ti,j784s4-pcie-ep
       - description: PCIe EP controller in AM64
         items:
           - const: ti,am64-pcie-ep
@@ -65,6 +63,41 @@ properties:
     items:
       - const: link_state
 
+allOf:
+  - $ref: cdns-pcie-ep.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am64-pcie-ep
+    then:
+      properties:
+        num-lanes:
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j7200-pcie-ep
+            - ti,j721e-pcie-ep
+    then:
+      properties:
+        num-lanes:
+          minimum: 1
+          maximum: 2
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j784s4-pcie-ep
+    then:
+      properties:
+        num-lanes:
+          minimum: 1
+          maximum: 4
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
index a2c5eaea57f5..b7a534cef24d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -10,13 +10,11 @@ title: TI J721E PCI Host (PCIe Wrapper)
 maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
 
-allOf:
-  - $ref: cdns-pcie-host.yaml#
-
 properties:
   compatible:
     oneOf:
       - const: ti,j721e-pcie-host
+      - const: ti,j784s4-pcie-host
       - description: PCIe controller in AM64
         items:
           - const: ti,am64-pcie-host
@@ -94,6 +92,41 @@ properties:
       interrupts:
         maxItems: 1
 
+allOf:
+  - $ref: cdns-pcie-host.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am64-pcie-host
+    then:
+      properties:
+        num-lanes:
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j7200-pcie-host
+            - ti,j721e-pcie-host
+    then:
+      properties:
+        num-lanes:
+          minimum: 1
+          maximum: 2
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j784s4-pcie-host
+    then:
+      properties:
+        num-lanes:
+          minimum: 1
+          maximum: 4
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 53da2edd7c9a..120e3bb1e545 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -83,7 +83,7 @@ examples:
                   <0x0 0x28050000 0x0 0x00010000>,
                   <0x0 0x24200000 0x0 0x00002000>,
                   <0x0 0x24162000 0x0 0x00001000>;
-            reg-names  = "dbi", "config", "ulreg", "smu", "mpu";
+            reg-names = "dbi", "config", "ulreg", "smu", "mpu";
             device_type = "pci";
             bus-range = <0x00 0xff>;
             num-lanes = <2>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
index e9fad4b3de68..6c96a4204e5d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
@@ -27,6 +27,9 @@ properties:
               - fsl,imx8mq-ddr-pmu
               - fsl,imx8mp-ddr-pmu
           - const: fsl,imx8m-ddr-pmu
+      - items:
+          - const: fsl,imx8dxl-ddr-pmu
+          - const: fsl,imx8-ddr-pmu
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
index c8c83acfb871..81c2654b7e57 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
@@ -16,20 +16,8 @@ properties:
   "#phy-cells":
     const: 0
 
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - "#phy-cells"
 
 additionalProperties: false
-
-examples:
-  - |
-    phy@0 {
-          compatible = "amlogic,g12a-mipi-dphy-analog";
-          reg = <0x0 0xc>;
-          #phy-cells = <0>;
-    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
index 009a39808318..70def36e5688 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
@@ -9,16 +9,6 @@ title: Amlogic AXG shared MIPI/PCIE analog PHY
 maintainers:
   - Remi Pommarel <repk@triplefau.lt>
 
-description: |+
-  The Everything-Else Power Domains node should be the child of a syscon
-  node with the required property:
-
-  - compatible: Should be the following:
-                "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
-
-  Refer to the bindings described in
-  Documentation/devicetree/bindings/mfd/syscon.yaml
-
 properties:
   compatible:
     const: amlogic,axg-mipi-pcie-analog-phy
@@ -31,10 +21,3 @@ required:
   - "#phy-cells"
 
 additionalProperties: false
-
-examples:
-  - |
-    mpphy: phy {
-          compatible = "amlogic,axg-mipi-pcie-analog-phy";
-          #phy-cells = <0>;
-    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
index 6703689fcdbe..f6e494d0d89b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
@@ -31,6 +31,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8188-mipi-tx
+              - mediatek,mt8195-mipi-tx
               - mediatek,mt8365-mipi-tx
           - const: mediatek,mt8183-mipi-tx
       - const: mediatek,mt2701-mipi-tx
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index 2bb91542e984..acba0720125d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -235,6 +235,15 @@ patternProperties:
           Specify the flag to enable BC1.2 if support it
         type: boolean
 
+      mediatek,force-mode:
+        description:
+          The force mode is used to manually switch the shared phy mode between
+          USB3 and PCIe, when USB3 phy type is selected by the consumer, and
+          force-mode is set, will cause phy's power and pipe toggled and force
+          phy as USB3 mode which switched from default PCIe mode. But perfer to
+          use the property "mediatek,syscon-type" for newer SoCs that support it.
+        type: boolean
+
       mediatek,syscon-type:
         $ref: /schemas/types.yaml#/definitions/phandle-array
         maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 2c3d6553a7ba..6c03f2d5fca3 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -36,6 +36,8 @@ properties:
       - qcom,sm8450-qmp-gen4x2-pcie-phy
       - qcom,sm8550-qmp-gen3x2-pcie-phy
       - qcom,sm8550-qmp-gen4x2-pcie-phy
+      - qcom,sm8650-qmp-gen3x2-pcie-phy
+      - qcom,sm8650-qmp-gen4x2-pcie-phy
 
   reg:
     minItems: 1
@@ -147,6 +149,8 @@ allOf:
               - qcom,sm8450-qmp-gen3x2-pcie-phy
               - qcom,sm8550-qmp-gen3x2-pcie-phy
               - qcom,sm8550-qmp-gen4x2-pcie-phy
+              - qcom,sm8650-qmp-gen3x2-pcie-phy
+              - qcom,sm8650-qmp-gen4x2-pcie-phy
     then:
       properties:
         clocks:
@@ -189,6 +193,7 @@ allOf:
           contains:
             enum:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
+              - qcom,sm8650-qmp-gen4x2-pcie-phy
     then:
       properties:
         resets:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index f3a3296c811c..8474eef8d0ff 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -32,6 +32,7 @@ properties:
       - qcom,sm8350-qmp-ufs-phy
       - qcom,sm8450-qmp-ufs-phy
       - qcom,sm8550-qmp-ufs-phy
+      - qcom,sm8650-qmp-ufs-phy
 
   reg:
     maxItems: 1
@@ -112,6 +113,7 @@ allOf:
               - qcom,sm8250-qmp-ufs-phy
               - qcom,sm8350-qmp-ufs-phy
               - qcom,sm8550-qmp-ufs-phy
+              - qcom,sm8650-qmp-ufs-phy
     then:
       properties:
         clocks:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index 57702f7f2a46..15d82c67f157 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -32,6 +32,7 @@ properties:
       - qcom,sm8150-qmp-usb3-uni-phy
       - qcom,sm8250-qmp-usb3-uni-phy
       - qcom,sm8350-qmp-usb3-uni-phy
+      - qcom,x1e80100-qmp-usb3-uni-phy
 
 
   reg:
@@ -135,6 +136,7 @@ allOf:
               - qcom,sm8150-qmp-usb3-uni-phy
               - qcom,sm8250-qmp-usb3-uni-phy
               - qcom,sm8350-qmp-usb3-uni-phy
+              - qcom,x1e80100-qmp-usb3-uni-phy
     then:
       properties:
         clocks:
@@ -171,6 +173,7 @@ allOf:
             enum:
               - qcom,sa8775p-qmp-usb3-uni-phy
               - qcom,sc8280xp-qmp-usb3-uni-phy
+              - qcom,x1e80100-qmp-usb3-uni-phy
     then:
       required:
         - power-domains
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index 9af203dc8793..2d0d7e9e6431 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -27,6 +27,8 @@ properties:
       - qcom,sm8350-qmp-usb3-dp-phy
       - qcom,sm8450-qmp-usb3-dp-phy
       - qcom,sm8550-qmp-usb3-dp-phy
+      - qcom,sm8650-qmp-usb3-dp-phy
+      - qcom,x1e80100-qmp-usb3-dp-phy
 
   reg:
     maxItems: 1
@@ -62,12 +64,12 @@ properties:
   "#clock-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   "#phy-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   orientation-switch:
     description:
@@ -128,6 +130,8 @@ allOf:
             - qcom,sc8280xp-qmp-usb43dp-phy
             - qcom,sm6350-qmp-usb3-dp-phy
             - qcom,sm8550-qmp-usb3-dp-phy
+            - qcom,sm8650-qmp-usb3-dp-phy
+            - qcom,x1e80100-qmp-usb3-dp-phy
     then:
       required:
         - power-domains
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
index c95828607ab6..b82f7f5731ed 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
@@ -18,6 +18,8 @@ properties:
       - items:
           - enum:
               - qcom,sdx75-snps-eusb2-phy
+              - qcom,sm8650-snps-eusb2-phy
+              - qcom,x1e80100-snps-eusb2-phy
           - const: qcom,sm8550-snps-eusb2-phy
       - const: qcom,sm8550-snps-eusb2-phy
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
index 45a307d3ce16..c11495524dd2 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
@@ -31,6 +31,7 @@ properties:
               - ti,omap3-padconf
               - ti,omap4-padconf
               - ti,omap5-padconf
+              - ti,j7200-padconf
           - const: pinctrl-single
 
   reg:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
index fad0118fd521..23300606547c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
@@ -23,13 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 24
@@ -95,7 +88,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml
index 3d3086ae1ba6..e571cd64418f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml
@@ -26,13 +26,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 27
@@ -100,7 +93,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
index 7c3e5e043f07..ed00fbaec11b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -22,12 +22,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -100,7 +94,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
index e053fbd588b5..6f90dbbdbdcc 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
@@ -23,13 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 35
@@ -103,7 +96,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
index e5e9962b2174..bca903b5da6d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
@@ -23,13 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 33
@@ -97,7 +90,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml
new file mode 100644
index 000000000000..3b5045730471
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC LPASS LPI TLMM Common Properties
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Common properties for the Top Level Mode Multiplexer pin controllers in the
+  Low Power Audio SubSystem (LPASS) Low Power Island (LPI) of Qualcomm SoCs.
+
+properties:
+  gpio-controller: true
+
+  "#gpio-cells":
+    description:
+      Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+required:
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+additionalProperties: true
+
+$defs:
+  qcom-tlmm-state:
+    properties:
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          0: No adjustments
+          1: Higher Slew rate (faster edges)
+          2: Lower Slew rate (slower edges)
+          3: Reserved (No adjustments)
+
+      bias-bus-hold: true
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+    additionalProperties: true
+
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
index 5ece3b9d676b..bd3cbb44c99a 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
@@ -25,19 +25,7 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
 
 patternProperties:
   "-state$":
@@ -110,6 +98,12 @@ $defs:
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
index 5885aee95c98..299e0b4b0ab4 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
@@ -23,18 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  '#interrupt-cells': true
-  gpio-controller: true
-  '#gpio-cells': true
-  gpio-ranges: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
 patternProperties:
   "-state$":
     oneOf:
@@ -74,6 +62,12 @@ $defs:
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index a602bf0d27fb..68d3fa2105b8 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -23,12 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-
   gpio-reserved-ranges:
     maxItems: 1
 
@@ -82,7 +76,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
index a05971611780..61f5be21f30c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
@@ -23,13 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 86
@@ -92,7 +85,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
index 5095e86fe9a2..295dd5fcf4c3 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
@@ -25,19 +25,7 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
 
 patternProperties:
   "-state$":
@@ -108,6 +96,12 @@ $defs:
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
index 063d004967bb..904af87f9eaf 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
@@ -23,13 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 61
@@ -114,7 +107,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
index 798aac9e6e31..8a3a962f6c00 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
@@ -22,12 +22,7 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  "#gpio-cells": true
-  gpio-ranges: true
 
 patternProperties:
   "-state$":
@@ -117,7 +112,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml
index 9172b50f7a98..46618740bd31 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml
@@ -23,13 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 76
@@ -108,7 +101,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml
index 8a3be65c51ed..840fdaabde12 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml
@@ -23,13 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 73
@@ -124,7 +117,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml
index ca95de0b87a6..d4391c194ff7 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml
@@ -23,13 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 73
@@ -104,7 +97,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
index 41525ecfa8e3..fa90981db40b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
@@ -25,13 +25,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 73
@@ -114,7 +107,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml
index 59d406b60957..c5010c175b23 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml
@@ -23,13 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 75
@@ -133,7 +126,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml
index bd6d7caf499a..bcaa231adaf7 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml
@@ -23,13 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 75
@@ -118,7 +111,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
index 80f960671857..fe717d8d4798 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -158,34 +158,40 @@ examples:
   - |
     #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 
-    pm8841_mpp: mpps@a000 {
-      compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
-      reg = <0xa000 0>;
-      gpio-controller;
-      #gpio-cells = <2>;
-      gpio-ranges = <&pm8841_mpp 0 0 4>;
-      gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
-              "BT_LED_CTRL", "GPIO-F";
-      interrupt-controller;
-      #interrupt-cells = <2>;
-
-      pinctrl-names = "default";
-      pinctrl-0 = <&pm8841_default>;
-
-      mpp1-state {
-        pins = "mpp1";
-        function = "digital";
-        input-enable;
-        power-source = <PM8841_MPP_S3>;
-      };
-
-      default-state {
-        gpio-pins {
-          pins = "mpp1", "mpp2", "mpp3", "mpp4";
-          function = "digital";
-          input-enable;
-          power-source = <PM8841_MPP_S3>;
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pm8841_mpp: mpps@a000 {
+            compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
+            reg = <0xa000>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pm8841_mpp 0 0 4>;
+            gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
+                              "BT_LED_CTRL", "GPIO-F";
+            interrupt-controller;
+            #interrupt-cells = <2>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pm8841_default>;
+
+            mpp1-state {
+                pins = "mpp1";
+                function = "digital";
+                input-enable;
+                power-source = <PM8841_MPP_S3>;
+            };
+
+            default-state {
+                gpio-pins {
+                    pins = "mpp1", "mpp2", "mpp3", "mpp4";
+                    function = "digital";
+                    input-enable;
+                    power-source = <PM8841_MPP_S3>;
+                };
+            };
         };
-      };
     };
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
index c323f6d495a4..e123beb33aef 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
@@ -22,13 +22,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -92,7 +85,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
index b1b9cd319e50..4009501b3414 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
@@ -29,13 +29,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 60
@@ -130,7 +123,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml
index 237cac4f6ce1..88afeae530c6 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml
@@ -23,10 +23,8 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
+  interrupts:
+    maxItems: 1
 
   gpio-reserved-ranges:
     minItems: 1
@@ -35,10 +33,6 @@ properties:
   gpio-line-names:
     maxItems: 151
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -101,7 +95,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
index 2173c5255638..e9abbf2c0689 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
@@ -22,13 +22,8 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
+  interrupts:
+    maxItems: 1
 
   gpio-reserved-ranges:
     minItems: 1
@@ -37,12 +32,6 @@ properties:
   gpio-line-names:
     maxItems: 148
 
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
 patternProperties:
   "-state$":
     oneOf:
@@ -108,6 +97,12 @@ $defs:
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
index 573e459b1c44..5606f2136ad1 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
@@ -29,13 +29,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 60
@@ -112,7 +105,7 @@ required:
   - reg
   - reg-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
index 00c5a00e35fc..08801cc4e476 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
@@ -20,16 +20,6 @@ properties:
   reg:
     maxItems: 2
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -45,7 +35,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -68,42 +59,14 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-            0: No adjustments
-            1: Higher Slew rate (faster edges)
-            2: Lower Slew rate (slower edges)
-            3: Reserved (No adjustments)
-
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-bus-hold: true
-      bias-disable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 required:
   - compatible
   - reg
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,lpass-lpi-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
index c8735ab97e40..5329fe2a4397 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -23,24 +23,6 @@ properties:
     description: Specifies the TLMM summary IRQ
     maxItems: 1
 
-  interrupt-controller: true
-
-  '#interrupt-cells':
-    description:
-      Specifies the PIN numbers and Flags, as defined in defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
-  gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 88
@@ -48,8 +30,6 @@ properties:
   gpio-line-names:
     maxItems: 175
 
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -124,14 +104,8 @@ allOf:
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
-
-additionalProperties: false
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
index b086a5184235..c122bb849f0f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
@@ -31,20 +31,7 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  '#interrupt-cells': true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  '#gpio-cells': true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-  - reg-names
-
-additionalProperties: false
 
 patternProperties:
   "-state$":
@@ -106,6 +93,13 @@ $defs:
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
index a9167dac9ab5..240e6d45cc95 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
@@ -32,16 +32,6 @@ properties:
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -57,7 +47,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -79,48 +70,16 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
index 4bd6d7977d3e..ed344deaf8b9 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
@@ -25,19 +25,7 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
 
 patternProperties:
   "-state$":
@@ -108,6 +96,12 @@ $defs:
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml
index 508e0633b253..a00cb43df144 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml
@@ -34,10 +34,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 57
@@ -45,10 +41,6 @@ properties:
   gpio-line-names:
     maxItems: 114
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -130,7 +122,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
index 84a15f77e710..b56e717aa28e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
@@ -25,23 +25,10 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 75
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
 patternProperties:
   "-state$":
     oneOf:
@@ -98,6 +85,12 @@ $defs:
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
index d301881ddfa8..dfe5616b9b85 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
@@ -26,10 +26,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 75
@@ -37,10 +33,6 @@ properties:
   gpio-line-names:
     maxItems: 150
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -110,7 +102,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
index 67af99dd8f14..edbcff92bbf9 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -23,12 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-
   gpio-reserved-ranges:
     maxItems: 1
 
@@ -102,7 +96,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
index 27319782d94b..a31b638c456d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
@@ -22,12 +22,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-
   gpio-reserved-ranges:
     maxItems: 1
 
@@ -122,7 +116,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
index 7cb96aa75b08..cb1d978d02c9 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
@@ -22,10 +22,8 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
+  interrupts:
+    maxItems: 1
 
   gpio-reserved-ranges:
     minItems: 1
@@ -34,10 +32,6 @@ properties:
   gpio-line-names:
     maxItems: 133
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -100,7 +94,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
new file mode 100644
index 000000000000..bb08ca5a1509
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm4450-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM4450 TLMM block
+
+maintainers:
+  - Tengfei Fan <quic_tengfan@quicinc.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM4450 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm4450-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 68
+
+  gpio-line-names:
+    maxItems: 136
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm4450-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm4450-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm4450-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-5])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+          minItems: 1
+          maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
+                atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
+                atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
+                jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+                mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
+                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
+                mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
+                phase_flag0, phase_flag1, phase_flag10, phase_flag11,
+                phase_flag12, phase_flag13, phase_flag14, phase_flag15,
+                phase_flag16, phase_flag17, phase_flag18, phase_flag19,
+                phase_flag2, phase_flag20, phase_flag21, phase_flag22,
+                phase_flag23, phase_flag24, phase_flag25, phase_flag26,
+                phase_flag27, phase_flag28, phase_flag29, phase_flag3,
+                phase_flag30, phase_flag31, phase_flag4, phase_flag5,
+                phase_flag6, phase_flag7, phase_flag8, phase_flag9,
+                pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
+                prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
+                qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
+                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
+                qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
+                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+                qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
+                qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
+                qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
+                qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
+                tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
+                tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
+                uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
+                uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
+                vsense_trigger ]
+
+        required:
+          - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sm4450-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 137>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio23";
+                function = "qup1_se2";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio22";
+                function = "qup1_se2";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
index abac3311fc55..f4cf2ce86fcd 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
@@ -31,16 +31,6 @@ properties:
     items:
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -56,7 +46,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -75,48 +66,17 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
 
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
index 871df54f69a2..7f36f9b93333 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
@@ -29,13 +29,7 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
   gpio-reserved-ranges: true
-  wakeup-parent: true
 
 patternProperties:
   "-state$":
@@ -97,7 +91,7 @@ required:
   - reg
   - reg-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
index 8d77707b02b9..ddeaeaa9a450 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
@@ -30,20 +30,7 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-  - reg-names
-
-additionalProperties: false
 
 patternProperties:
   "-state$":
@@ -105,6 +92,13 @@ $defs:
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
index 27af379cf791..a4771f87d936 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
@@ -26,10 +26,6 @@ properties:
     minItems: 9
     maxItems: 9
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 78
@@ -37,16 +33,6 @@ properties:
   gpio-line-names:
     maxItems: 156
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
 patternProperties:
   "-state$":
     oneOf:
@@ -112,6 +98,12 @@ $defs:
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
index 6e02ba24825f..047f82863f9b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -25,19 +25,7 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
 
 patternProperties:
   "-state$":
@@ -113,6 +101,12 @@ $defs:
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
index ede0f3acad9c..7f23f939ad32 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
@@ -32,13 +32,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 60
@@ -111,7 +104,7 @@ required:
   - reg
   - reg-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
index c6439626464e..bdb7ed4be026 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
@@ -30,13 +30,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 88
@@ -113,7 +106,7 @@ required:
   - reg
   - reg-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
index 4b4be7efc150..750c996c10a7 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
@@ -30,16 +30,6 @@ properties:
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -55,7 +45,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -78,48 +69,16 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-            0: No adjustments
-            1: Higher Slew rate (faster edges)
-            2: Lower Slew rate (slower edges)
-            3: Reserved (No adjustments)
-
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-bus-hold: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index 021c54708524..b5d04347c064 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -28,13 +28,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 90
@@ -106,7 +99,7 @@ required:
   - reg
   - reg-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml
index 2e65ae08dd21..9d782f910b31 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml
@@ -33,16 +33,6 @@ properties:
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -58,7 +48,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -81,48 +72,16 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml
index 6e8f41ff0a76..ec5e09611d81 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml
@@ -25,10 +25,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 102
@@ -36,16 +32,6 @@ properties:
   gpio-line-names:
     maxItems: 203
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
 patternProperties:
   "-state$":
     oneOf:
@@ -108,6 +94,12 @@ $defs:
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
index 1eefa9aa6a86..e7565592da86 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
@@ -32,16 +32,6 @@ properties:
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -57,7 +47,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -81,48 +72,16 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
index 5163fe3f5365..16fd2c5e2339 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
@@ -25,10 +25,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 105
@@ -36,16 +32,6 @@ properties:
   gpio-line-names:
     maxItems: 210
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
 patternProperties:
   "-state$":
     oneOf:
@@ -107,6 +93,12 @@ $defs:
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml
index ef9743246849..bf4a72facae1 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml
@@ -16,7 +16,11 @@ description:
 
 properties:
   compatible:
-    const: qcom,sm8550-lpass-lpi-pinctrl
+    oneOf:
+      - const: qcom,sm8550-lpass-lpi-pinctrl
+      - items:
+          - const: qcom,x1e80100-lpass-lpi-pinctrl
+          - const: qcom,sm8550-lpass-lpi-pinctrl
 
   reg:
     items:
@@ -33,16 +37,6 @@ properties:
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -58,7 +52,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -81,48 +76,16 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
index f789c7753a92..c2ae79df424f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
@@ -22,10 +22,8 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
+  interrupts:
+    maxItems: 1
 
   gpio-reserved-ranges:
     minItems: 1
@@ -34,10 +32,6 @@ properties:
   gpio-line-names:
     maxItems: 210
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -117,7 +111,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml
new file mode 100644
index 000000000000..db7214362301
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8650 SoC LPASS LPI TLMM
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SM8650 SoC.
+
+properties:
+  compatible:
+    const: qcom,sm8650-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8650-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8650-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8650-lpass-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
+
+      function:
+        enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
+                dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b,
+                ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk,
+                i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk,
+                i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk,
+                i2s4_data, i2s4_ws, qca_swr_clk, qca_swr_data, slimbus_clk,
+                slimbus_data, swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data,
+                wsa_swr_clk, wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+allOf:
+  - $ref: qcom,lpass-lpi-common.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+    lpass_tlmm: pinctrl@6e80000 {
+        compatible = "qcom,sm8650-lpass-lpi-pinctrl";
+        reg = <0x06e80000 0x20000>;
+
+        clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+        tx-swr-sleep-clk-state {
+            pins = "gpio0";
+            function = "swr_tx_clk";
+            drive-strength = <2>;
+            bias-pull-down;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-tlmm.yaml
new file mode 100644
index 000000000000..c0a06abf851d
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-tlmm.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8650 TLMM block
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM8650 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8650-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 105
+
+  gpio-line-names:
+    maxItems: 210
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8650-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8650-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8650-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0,
+                audio_ext_mclk1, audio_ref_clk, cam_aon_mclk2, cam_aon_mclk4,
+                cam_mclk, cci_async_in, cci_i2c_scl, cci_i2c_sda, cci_timer,
+                cmu_rng, coex_uart1_rx, coex_uart1_tx, coex_uart2_rx,
+                coex_uart2_tx, cri_trng, dbg_out_clk, ddr_bist_complete,
+                ddr_bist_fail, ddr_bist_start, ddr_bist_stop, ddr_pxi0,
+                ddr_pxi1, ddr_pxi2, ddr_pxi3, do_not, dp_hot, gcc_gp1,
+                gcc_gp2, gcc_gp3, gnss_adc0, gnss_adc1, i2chub0_se0,
+                i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4,
+                i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8,
+                i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws,
+                i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c,
+                jitter_bist, mdp_vsync, mdp_vsync0_out, mdp_vsync1_out,
+                mdp_vsync2_out, mdp_vsync3_out, mdp_vsync_e, nav_gpio0,
+                nav_gpio1, nav_gpio2, nav_gpio3, pcie0_clk_req_n,
+                pcie1_clk_req_n, phase_flag, pll_bist_sync, pll_clk_aux,
+                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+                qdss_gpio, qlink_big_enable, qlink_big_request,
+                qlink_little_enable, qlink_little_request, qlink_wmss,
+                qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qup1_se0,
+                qup1_se1, qup1_se2, qup1_se3, qup1_se4, qup1_se5, qup1_se6,
+                qup1_se7, qup2_se0, qup2_se1, qup2_se2, qup2_se3, qup2_se4,
+                qup2_se5, qup2_se6, qup2_se7, sd_write_protect, sdc40, sdc41,
+                sdc42, sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4,
+                tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+                tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2,
+                tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3, uim0_clk,
+                uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
+                uim1_present, uim1_reset, usb1_hs, usb_phy, vfr_0, vfr_1,
+                vsense_trigger_mirnat ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sm8650-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 211>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio60";
+                function = "qup1_se7";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio61";
+                function = "qup1_se7";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,x1e80100-tlmm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,x1e80100-tlmm.yaml
new file mode 100644
index 000000000000..a1333e0743a9
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,x1e80100-tlmm.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. X1E80100 TLMM block
+
+maintainers:
+  - Rajendra Nayak <quic_rjendra@quicinc.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm X1E80100 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,x1e80100-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 119
+
+  gpio-line-names:
+    maxItems: 238
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-x1e80100-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-x1e80100-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-x1e80100-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-2][0-9]|23[0-7])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ aon_cci, aoss_cti, atest_char, atest_char0,
+                atest_char1, atest_char2, atest_char3, atest_usb,
+                audio_ext, audio_ref, cam_aon, cam_mclk, cci_async,
+                cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3,
+                cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, ddr_pxi6, ddr_pxi7,
+                edp0_hot, edp0_lcd, edp1_hot, edp1_lcd, eusb0_ac, eusb1_ac,
+                eusb2_ac, eusb3_ac, eusb5_ac, eusb6_ac, gcc_gp1, gcc_gp2,
+                gcc_gp3, gpio, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, i2s1_data0,
+                i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, jitter_bist, mdp_vsync0,
+                mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5,
+                mdp_vsync6, mdp_vsync7, mdp_vsync8, pcie3_clk, pcie4_clk,
+                pcie5_clk, pcie6a_clk, pcie6b_clk, phase_flag, pll_bist, pll_clk,
+                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+                qdss_gpio, qspi00, qspi01, qspi02, qspi03, qspi0_clk, qspi0_cs0,
+                qspi0_cs1, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+                qup0_se5, qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
+                qup1_se4, qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1, qup2_se2,
+                qup2_se3, qup2_se4, qup2_se5, qup2_se6, qup2_se7, sd_write, sdc4_clk,
+                sdc4_cmd, sdc4_data0, sdc4_data1, sdc4_data2, sdc4_data3, sys_throttle,
+                tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5,
+                tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
+                tsense_pwm1, tsense_pwm2, sense_pwm3, tsense_pwm4, usb0_dp, usb0_phy,
+                usb0_sbrx, usb0_sbtx, usb1_dp, usb1_phy, usb1_sbrx, usb1_sbtx,
+                usb2_dp, usb2_phy, usb2_sbrx, usb2_sbtx, vsense_trigger ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,x1e80100-tlmm";
+        reg = <0x0f100000 0xf00000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 239>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio26";
+                function = "qup2_se7";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio27";
+                function = "qup2_se7";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
index 8271e7b2c162..8b8e4e1a000f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
@@ -20,7 +20,7 @@ description:
 
 properties:
   compatible:
-    const: "renesas,r7s9210-pinctrl" # RZ/A2M
+    const: renesas,r7s9210-pinctrl # RZ/A2M
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index b5ca40d0e251..d476de82e5c3 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -185,17 +185,17 @@ examples:
                     sd1_mux {
                             pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */
                                      <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */
-                            power-source  = <3300>;
+                            power-source = <3300>;
                     };
 
                     sd1_data {
                             pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
-                            power-source  = <3300>;
+                            power-source = <3300>;
                     };
 
                     sd1_ctrl {
                             pins = "SD1_CLK", "SD1_CMD";
-                            power-source  = <3300>;
+                            power-source = <3300>;
                     };
             };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
index 1de91a51234d..4dfb49b0e07f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
@@ -28,15 +28,27 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - samsung,s3c2410-wakeup-eint
-      - samsung,s3c2412-wakeup-eint
-      - samsung,s3c64xx-wakeup-eint
-      - samsung,s5pv210-wakeup-eint
-      - samsung,exynos4210-wakeup-eint
-      - samsung,exynos7-wakeup-eint
-      - samsung,exynos850-wakeup-eint
-      - samsung,exynosautov9-wakeup-eint
+    oneOf:
+      - enum:
+          - samsung,s3c2410-wakeup-eint
+          - samsung,s3c2412-wakeup-eint
+          - samsung,s3c64xx-wakeup-eint
+          - samsung,s5pv210-wakeup-eint
+          - samsung,exynos4210-wakeup-eint
+          - samsung,exynos7-wakeup-eint
+          - samsung,exynosautov920-wakeup-eint
+      - items:
+          - enum:
+              - samsung,exynos5433-wakeup-eint
+              - samsung,exynos7885-wakeup-eint
+              - samsung,exynos850-wakeup-eint
+          - const: samsung,exynos7-wakeup-eint
+      - items:
+          - enum:
+              - google,gs101-wakeup-eint
+              - samsung,exynosautov9-wakeup-eint
+          - const: samsung,exynos850-wakeup-eint
+          - const: samsung,exynos7-wakeup-eint
 
   interrupts:
     description:
@@ -79,11 +91,14 @@ allOf:
   - if:
       properties:
         compatible:
-          contains:
-            enum:
-              - samsung,s5pv210-wakeup-eint
-              - samsung,exynos4210-wakeup-eint
-              - samsung,exynos7-wakeup-eint
+          # Match without "contains", to skip newer variants which are still
+          # compatible with samsung,exynos7-wakeup-eint
+          enum:
+            - samsung,s5pv210-wakeup-eint
+            - samsung,exynos4210-wakeup-eint
+            - samsung,exynos5433-wakeup-eint
+            - samsung,exynos7-wakeup-eint
+            - samsung,exynos7885-wakeup-eint
     then:
       properties:
         interrupts:
@@ -98,7 +113,7 @@ allOf:
           contains:
             enum:
               - samsung,exynos850-wakeup-eint
-              - samsung,exynosautov9-wakeup-eint
+              - samsung,exynosautov920-wakeup-eint
     then:
       properties:
         interrupts: false
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
index 26614621774a..118549c25976 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
@@ -35,6 +35,7 @@ properties:
 
   compatible:
     enum:
+      - google,gs101-pinctrl
       - samsung,s3c2412-pinctrl
       - samsung,s3c2416-pinctrl
       - samsung,s3c2440-pinctrl
@@ -53,6 +54,7 @@ properties:
       - samsung,exynos7885-pinctrl
       - samsung,exynos850-pinctrl
       - samsung,exynosautov9-pinctrl
+      - samsung,exynosautov920-pinctrl
       - tesla,fsd-pinctrl
 
   interrupts:
@@ -313,7 +315,8 @@ examples:
         pinctrl-0 = <&initial_alive>;
 
         wakeup-interrupt-controller {
-            compatible = "samsung,exynos7-wakeup-eint";
+            compatible = "samsung,exynos5433-wakeup-eint",
+                         "samsung,exynos7-wakeup-eint";
             interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
         };
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
index b85f9e36ce4b..d2676f92ef5b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
@@ -39,7 +39,7 @@ properties:
       phandle to the SLCR.
 
 patternProperties:
-  '^(.*-)?(default|gpio)$':
+  '^(.*-)?(default|gpio-grp)$':
     type: object
     patternProperties:
       '^mux':
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
index 01b6f2b57843..f13d315b5d5e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
@@ -31,7 +31,7 @@ properties:
     const: xlnx,zynqmp-pinctrl
 
 patternProperties:
-  '^(.*-)?(default|gpio)$':
+  '^(.*-)?(default|gpio-grp)$':
     type: object
     patternProperties:
       '^mux':
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
index 407b7cfec783..7a0f1a400868 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
@@ -20,6 +20,7 @@ properties:
   compatible:
     items:
       - enum:
+          - fsl,imx8dl-scu-pd
           - fsl,imx8qm-scu-pd
           - fsl,imx8qxp-scu-pd
       - const: fsl,scu-pd
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index da9c5846f4e1..2ff246cf8b81 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -39,7 +39,6 @@ properties:
           - qcom,sc7280-rpmhpd
           - qcom,sc8180x-rpmhpd
           - qcom,sc8280xp-rpmhpd
-          - qcom,sc8380xp-rpmhpd
           - qcom,sdm660-rpmpd
           - qcom,sdm670-rpmhpd
           - qcom,sdm845-rpmhpd
@@ -57,6 +56,7 @@ properties:
           - qcom,sm8450-rpmhpd
           - qcom,sm8550-rpmhpd
           - qcom,sm8650-rpmhpd
+          - qcom,x1e80100-rpmhpd
       - items:
           - enum:
               - qcom,msm8937-rpmpd
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml
index 14a262bcbf7c..627f8a6078c2 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml
@@ -28,17 +28,15 @@ properties:
     items:
       - const: reboot-mode
 
-patternProperties:
-  "^mode-.+":
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: Vendor-specific mode value written to the mode register
+allOf:
+  - $ref: reboot-mode.yaml#
 
 required:
   - compatible
   - nvmem-cells
   - nvmem-cell-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
index 5e460128b0d1..fc8105a7b9b2 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -111,21 +111,24 @@ examples:
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/input/linux-event-codes.h>
    #include <dt-bindings/spmi/spmi.h>
-   spmi_bus: spmi@c440000 {
+
+   spmi@c440000 {
      reg = <0x0c440000 0x1100>;
      #address-cells = <2>;
      #size-cells = <0>;
-     pmk8350: pmic@0 {
+
+     pmic@0 {
        reg = <0x0 SPMI_USID>;
        #address-cells = <1>;
        #size-cells = <0>;
-       pmk8350_pon: pon_hlos@1300 {
-         reg = <0x1300>;
+
+       pon@800 {
          compatible = "qcom,pm8998-pon";
+         reg = <0x800>;
 
          pwrkey {
             compatible = "qcom,pm8941-pwrkey";
-            interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >;
+            interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
             debounce = <15625>;
             bias-pull-up;
             linux,code = <KEY_POWER>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
index 9b1ffceefe3d..b6acff199cde 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
@@ -29,12 +29,10 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: Offset in the register map for the mode register (in bytes)
 
-patternProperties:
-  "^mode-.+":
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: Vendor-specific mode value written to the mode register
+allOf:
+  - $ref: reboot-mode.yaml#
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
index 45792e216981..799831636194 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
@@ -57,7 +57,7 @@ examples:
 
     firmware {
       zynqmp-firmware {
-        zynqmp-power {
+        power-management {
           compatible = "xlnx,zynqmp-power";
           interrupts = <0 35 4>;
         };
@@ -70,7 +70,7 @@ examples:
 
     firmware {
       zynqmp-firmware {
-        zynqmp-power {
+        power-management {
           compatible = "xlnx,zynqmp-power";
           interrupt-parent = <&gic>;
           interrupts = <0 35 4>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/supply/bq24190.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/supply/bq24190.yaml
index d3ebc9de8c0b..131b7e57d22f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/supply/bq24190.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/supply/bq24190.yaml
@@ -20,6 +20,7 @@ properties:
       - ti,bq24192
       - ti,bq24192i
       - ti,bq24196
+      - ti,bq24296
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
index 07e38be39f1b..89f9603499b4 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
@@ -79,10 +79,10 @@ examples:
         interrupt-parent = <&gpio1>;
         interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
-        richtek,output-charge-current	    = <500000>;
-        richtek,end-of-charge-percentage    = <10>;
-        richtek,battery-regulation-voltage  = <4200000>;
-        richtek,boost-output-voltage	    = <5050000>;
+        richtek,output-charge-current = <500000>;
+        richtek,end-of-charge-percentage = <10>;
+        richtek,battery-regulation-voltage = <4200000>;
+        richtek,boost-output-voltage = <5050000>;
 
         richtek,min-input-voltage-regulation = <4500000>;
         richtek,avg-input-current-regulation = <500000>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/wakeup-source.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/wakeup-source.txt
index 697333a56d5e..75bc20b95688 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/power/wakeup-source.txt
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -3,16 +3,20 @@ Specifying wakeup capability for devices
 
 Any device nodes
 ----------------
-Nodes that describe devices which has wakeup capability must contain an
+Nodes that describe devices which have wakeup capability may contain a
 "wakeup-source" boolean property.
 
-Also, if device is marked as a wakeup source, then all the primary
-interrupt(s) can be used as wakeup interrupt(s).
+If the device is marked as a wakeup-source, interrupt wake capability depends
+on the device specific "interrupt-names" property. If no interrupts are labeled
+as wake capable, then it is up to the device to determine which interrupts can
+wake the system.
 
-However if the devices have dedicated interrupt as the wakeup source
-then they need to specify/identify the same using device specific
-interrupt name. In such cases only that interrupt can be used as wakeup
-interrupt.
+However if a device has a dedicated interrupt as the wakeup source, then it
+needs to specify/identify it using a device specific interrupt name. In such
+cases only that interrupt can be used as a wakeup interrupt.
+
+While various legacy interrupt names exist, new devices should use "wakeup" as
+the canonical interrupt name.
 
 List of legacy properties and respective binding document
 ---------------------------------------------------------
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
index 153e146df7d4..afcdeed4e88a 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
@@ -8,7 +8,6 @@ title: MediaTek DISP_PWM Controller
 
 maintainers:
   - Jitao Shi <jitao.shi@mediatek.com>
-  - Xinlei Lee <xinlei.lee@mediatek.com>
 
 allOf:
   - $ref: pwm.yaml#
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
deleted file mode 100644
index 25ecfe14c698..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* OMAP PWM for dual-mode timers
-
-Required properties:
-- compatible: Shall contain "ti,omap-dmtimer-pwm".
-- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer-dm.yaml for info
-  about these timers.
-- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
-  the cells format.
-
-Optional properties:
-- ti,prescaler: Should be a value between 0 and 7, see the timers datasheet
-- ti,clock-source: Set dmtimer parent clock, values between 0 and 2:
-  - 0x00 - high-frequency system clock (timer_sys_ck)
-  - 0x01 - 32-kHz always-on clock (timer_32k_ck)
-  - 0x02 - external clock (timer_ext_ck, OMAP2 only)
-
-Example:
-	pwm9: dmtimer-pwm@9 {
-		compatible = "ti,omap-dmtimer-pwm";
-		ti,timers = <&timer9>;
-		#pwm-cells = <3>;
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
index 2162f661ed5a..17a2b927af33 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
@@ -29,7 +29,11 @@ properties:
           - samsung,exynos4210-pwm          # 32-bit, Exynos
       - items:
           - enum:
+              - samsung,exynos5433-pwm
+              - samsung,exynos7-pwm
               - samsung,exynosautov9-pwm
+              - samsung,exynosautov920-pwm
+              - tesla,fsd-pwm
           - const: samsung,exynos4210-pwm
 
   reg:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/pwm/ti,omap-dmtimer-pwm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/ti,omap-dmtimer-pwm.yaml
new file mode 100644
index 000000000000..1e8e094aad74
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/ti,omap-dmtimer-pwm.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/ti,omap-dmtimer-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI dual mode timer PWM controller
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  TI dual mode timer instances have an IO pin for PWM capability
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: ti,omap-dmtimer-pwm
+
+  "#pwm-cells":
+    const: 3
+
+  ti,timers:
+    description: Timer instance phandle for the PWM
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,prescaler:
+    description: |
+      Legacy clock prescaler for timer. The timer counter is prescaled
+      with 2^n where n is the prescaler.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
+    deprecated: true
+
+  ti,clock-source:
+    description: |
+      Legacy clock for timer, please use assigned-clocks instead.
+      0x00 - high-frequency system clock (timer_sys_ck)
+      0x01 - 32-kHz always-on clock (timer_32k_ck)
+      0x02 - external clock (timer_ext_ck, OMAP2 only)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2 ]
+    deprecated: true
+
+required:
+  - compatible
+  - ti,timers
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pwm9: pwm {
+      compatible = "ti,omap-dmtimer-pwm";
+      ti,timers = <&timer9>;
+      #pwm-cells = <3>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index ce7751b9129c..9ff9abf2691a 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -105,6 +105,8 @@ properties:
     description:
       Interrupt signaling a critical under-voltage event.
 
+  system-critical-regulator: true
+
 required:
   - compatible
   - regulator-name
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
index 0221397eb51e..f825ee9efd81 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -62,8 +62,8 @@ examples:
              regulator-name = "buck1";
              regulator-min-microvolt = <600000>;
              regulator-max-microvolt = <2187500>;
-             regulator-min-microamp  = <3800000>;
-             regulator-max-microamp  = <6800000>;
+             regulator-min-microamp = <3800000>;
+             regulator-max-microamp = <6800000>;
              regulator-boot-on;
             };
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
index 6de5b027f990..0d34af98403f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -98,8 +98,8 @@ examples:
              regulator-name = "buck1";
              regulator-min-microvolt = <400000>;
              regulator-max-microvolt = <3587500>;
-             regulator-min-microamp  = <460000>;
-             regulator-max-microamp  = <7600000>;
+             regulator-min-microamp = <460000>;
+             regulator-max-microamp = <7600000>;
              regulator-boot-on;
              mps,buck-ovp-disable;
              mps,buck-phase-delay = /bits/ 8 <2>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index acd37f28ef53..27c6d5152413 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -42,6 +42,7 @@ description: |
       For PM7325, smps1 - smps8, ldo1 - ldo19
       For PM8005, smps1 - smps4
       For PM8009, smps1 - smps2, ldo1 - ldo7
+      For PM8010, ldo1 - ldo7
       For PM8150, smps1 - smps10, ldo1 - ldo18
       For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
       For PM8350, smps1 - smps12, ldo1 - ldo10
@@ -68,6 +69,7 @@ properties:
       - qcom,pm8005-rpmh-regulators
       - qcom,pm8009-rpmh-regulators
       - qcom,pm8009-1-rpmh-regulators
+      - qcom,pm8010-rpmh-regulators
       - qcom,pm8150-rpmh-regulators
       - qcom,pm8150l-rpmh-regulators
       - qcom,pm8350-rpmh-regulators
@@ -238,6 +240,18 @@ allOf:
         "^vdd-l[1-47]-supply$": true
         "^vdd-s[1-2]-supply$": true
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8010-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l2-supply: true
+        vdd-l3-l4-supply: true
+      patternProperties:
+        "^vdd-l[5-7]-supply$": true
+
   - if:
       properties:
         compatible:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
index 9ea8ac0786ac..f2fd2df68a9e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -47,6 +47,9 @@ description:
   For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13, l14, l15, l16, l17, l18
 
+  For pm8937, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10,
+  l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23
+
   For pm8941, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
   lvs3, 5vs1, 5vs2
@@ -92,6 +95,7 @@ properties:
       - qcom,rpm-pm8841-regulators
       - qcom,rpm-pm8909-regulators
       - qcom,rpm-pm8916-regulators
+      - qcom,rpm-pm8937-regulators
       - qcom,rpm-pm8941-regulators
       - qcom,rpm-pm8950-regulators
       - qcom,rpm-pm8953-regulators
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
index 7a1b7d2abbd4..aea849e8eadf 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
@@ -22,6 +22,7 @@ properties:
       - qcom,pm8841-regulators
       - qcom,pm8909-regulators
       - qcom,pm8916-regulators
+      - qcom,pm8937-regulators
       - qcom,pm8941-regulators
       - qcom,pm8950-regulators
       - qcom,pm8994-regulators
@@ -291,6 +292,24 @@ allOf:
       patternProperties:
         "^vdd_s[1-3]-supply$": true
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8937-regulators
+    then:
+      properties:
+        vdd_l1_l19-supply: true
+        vdd_l20_l21-supply: true
+        vdd_l2_l23-supply: true
+        vdd_l3-supply: true
+        vdd_l4_l5_l6_l7_l16-supply: true
+        vdd_l8_l11_l12_l17_l22-supply: true
+        vdd_l9_l10_l13_l14_l15_l18-supply: true
+      patternProperties:
+        "^vdd_s[1-6]-supply$": true
+
   - if:
       properties:
         compatible:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
index 89c564dfa5db..534f87e98716 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -36,10 +36,11 @@ unevaluatedProperties: false
 
 examples:
   - |
-     pm8150b {
+     pmic {
         #address-cells = <1>;
         #size-cells = <0>;
-        pm8150b_vbus: usb-vbus-regulator@1100 {
+
+        usb-vbus-regulator@1100 {
             compatible = "qcom,pm8150b-vbus-reg";
             reg = <0x1100>;
             regulator-min-microamp = <500000>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/regulator.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/regulator.yaml
index 9daf0fc2465f..1ef380d1515e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -114,6 +114,11 @@ properties:
     description: Enable pull down resistor when the regulator is disabled.
     type: boolean
 
+  system-critical-regulator:
+    description: Set if the regulator is critical to system stability or
+      functionality.
+    type: boolean
+
   regulator-over-current-protection:
     description: Enable over current protection.
     type: boolean
@@ -181,6 +186,14 @@ properties:
       be enabled but limit setting can be omitted. Limit is given as microvolt
       offset from voltage set to regulator.
 
+  regulator-uv-less-critical-window-ms:
+    description: Specifies the time window (in milliseconds) following a
+      critical under-voltage event during which the system can continue to
+      operate safely while performing less critical operations. This property
+      provides a defined duration before a more severe reaction to the
+      under-voltage event is needed, allowing for certain non-urgent actions to
+      be carried out in preparation for potential power loss.
+
   regulator-temp-protection-kelvin:
     description: Set over temperature protection limit. This is a limit where
       hardware performs emergency shutdown. Zero can be passed to disable
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
index 30632efdad8b..df36e29d974c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -113,10 +113,10 @@ examples:
     };
 
     imx7d-cm4 {
-      compatible	= "fsl,imx7d-cm4";
-      memory-region	= <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
-      syscon		= <&src>;
-      clocks		= <&clks IMX7D_ARM_M4_ROOT_CLK>;
+      compatible = "fsl,imx7d-cm4";
+      memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
+      syscon = <&src>;
+      clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
     };
 
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
index f10f329677d8..c054b84fdcd5 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
@@ -18,7 +18,10 @@ properties:
     enum:
       - qcom,sc7180-adsp-pas
       - qcom,sc7180-mpss-pas
+      - qcom,sc7280-adsp-pas
+      - qcom,sc7280-cdsp-pas
       - qcom,sc7280-mpss-pas
+      - qcom,sc7280-wpss-pas
 
   reg:
     maxItems: 1
@@ -75,6 +78,7 @@ allOf:
         compatible:
           enum:
             - qcom,sc7180-adsp-pas
+            - qcom,sc7280-adsp-pas
     then:
       properties:
         power-domains:
@@ -109,6 +113,23 @@ allOf:
         compatible:
           enum:
             - qcom,sc7280-mpss-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MSS power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mss
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7280-cdsp-pas
+            - qcom,sc7280-wpss-pas
     then:
       properties:
         power-domains:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
index d3fdee89d4f8..f0c6c0df0ce3 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
@@ -18,6 +18,7 @@ properties:
       - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
       - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
       - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
+      - amlogic,c3-reset # Reset Controller on C3 and compatible SoCs
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml
index b11ac533f914..f5ec1d54aa51 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml
@@ -28,28 +28,17 @@ description: |
 properties:
   compatible:
     oneOf:
-      - const: "fsl,imx51-src"
+      - const: fsl,imx51-src
       - items:
-          - const: "fsl,imx50-src"
-          - const: "fsl,imx51-src"
-      - items:
-          - const: "fsl,imx53-src"
-          - const: "fsl,imx51-src"
-      - items:
-          - const: "fsl,imx6q-src"
-          - const: "fsl,imx51-src"
-      - items:
-          - const: "fsl,imx6sx-src"
-          - const: "fsl,imx51-src"
-      - items:
-          - const: "fsl,imx6sl-src"
-          - const: "fsl,imx51-src"
-      - items:
-          - const: "fsl,imx6ul-src"
-          - const: "fsl,imx51-src"
-      - items:
-          - const: "fsl,imx6sll-src"
-          - const: "fsl,imx51-src"
+          - enum:
+              - fsl,imx50-src
+              - fsl,imx53-src
+              - fsl,imx6q-src
+              - fsl,imx6sx-src
+              - fsl,imx6sl-src
+              - fsl,imx6ul-src
+              - fsl,imx6sll-src
+          - const: fsl,imx51-src
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
index cdfcf32c53fa..e4de002d6903 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
@@ -50,32 +50,9 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/interrupt-controller/irq.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/clock/hi3660-clock.h>
-
-    iomcu: iomcu@ffd7e000 {
-        compatible = "hisilicon,hi3660-iomcu", "syscon";
-        reg = <0xffd7e000 0x1000>;
-    };
-
-    iomcu_rst: iomcu_rst_controller {
+    iomcu_rst_controller {
         compatible = "hisilicon,hi3660-reset";
         hisilicon,rst-syscon = <&iomcu>;
         #reset-cells = <2>;
     };
-
-    /* Specifying reset lines connected to IP modules */
-    i2c@ffd71000 {
-        compatible = "snps,designware-i2c";
-        reg = <0xffd71000 0x1000>;
-        interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-        clock-frequency = <400000>;
-        clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>;
-        resets = <&iomcu_rst 0x20 3>;
-        pinctrl-names = "default";
-        pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
-    };
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
index d92e2b3cc83f..24beb712b56d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
@@ -18,17 +18,17 @@ properties:
     oneOf:
       - description: on SC7180 SoCs the following compatibles must be specified
         items:
-          - const: "qcom,sc7180-aoss-cc"
-          - const: "qcom,sdm845-aoss-cc"
+          - const: qcom,sc7180-aoss-cc
+          - const: qcom,sdm845-aoss-cc
 
       - description: on SC7280 SoCs the following compatibles must be specified
         items:
-          - const: "qcom,sc7280-aoss-cc"
-          - const: "qcom,sdm845-aoss-cc"
+          - const: qcom,sc7280-aoss-cc
+          - const: qcom,sdm845-aoss-cc
 
       - description: on SDM845 SoCs the following compatibles must be specified
         items:
-          - const: "qcom,sdm845-aoss-cc"
+          - const: qcom,sdm845-aoss-cc
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
index ca5d79332189..f514363aa474 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
@@ -18,16 +18,16 @@ properties:
     oneOf:
       - description: on SC7180 SoCs the following compatibles must be specified
         items:
-          - const: "qcom,sc7180-pdc-global"
-          - const: "qcom,sdm845-pdc-global"
+          - const: qcom,sc7180-pdc-global
+          - const: qcom,sdm845-pdc-global
 
       - description: on SC7280 SoCs the following compatibles must be specified
         items:
-          - const: "qcom,sc7280-pdc-global"
+          - const: qcom,sc7280-pdc-global
 
       - description: on SDM845 SoCs the following compatibles must be specified
         items:
-          - const: "qcom,sdm845-pdc-global"
+          - const: qcom,sdm845-pdc-global
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
index 731b8ce01525..03c18611e42d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
@@ -17,7 +17,7 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL
+          - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC}
           - renesas,r9a07g054-usbphy-ctrl # RZ/V2L
       - const: renesas,rzg2l-usbphy-ctrl
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
index 49db66801429..1f1b42dde94d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Zynq UltraScale+ MPSoC and Versal reset
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@amd.com>
+  - Mubin Sayyed <mubin.sayyed@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 description: |
   The Zynq UltraScale+ MPSoC and Versal has several different resets.
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
index f392e367d673..9d8670c00e3b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -32,6 +32,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - amd,mbv32
               - andestech,ax45mp
               - canaan,k210
               - sifive,bullet0
@@ -62,8 +63,8 @@ properties:
 
   mmu-type:
     description:
-      Identifies the MMU address translation mode used on this
-      hart.  These values originate from the RISC-V Privileged
+      Identifies the largest MMU address translation mode supported by
+      this hart.  These values originate from the RISC-V Privileged
       Specification document, available from
       https://riscv.org/specifications/
     $ref: /schemas/types.yaml#/definitions/string
@@ -79,6 +80,11 @@ properties:
     description:
       The blocksize in bytes for the Zicbom cache operations.
 
+  riscv,cbop-block-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The blocksize in bytes for the Zicbop cache operations.
+
   riscv,cboz-block-size:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/riscv/extensions.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/riscv/extensions.yaml
index c91ab0e46648..63d81dc895e5 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/riscv/extensions.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/riscv/extensions.yaml
@@ -48,7 +48,7 @@ properties:
       insensitive, letters in the riscv,isa string must be all
       lowercase.
     $ref: /schemas/types.yaml#/definitions/string
-    pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$
+    pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[0-9a-z])+)?(?:_[hsxz](?:[0-9a-z])+)*$
     deprecated: true
 
   riscv,isa-base:
@@ -171,6 +171,12 @@ properties:
             memory types as ratified in the 20191213 version of the privileged
             ISA specification.
 
+        - const: zacas
+          description: |
+            The Zacas extension for Atomic Compare-and-Swap (CAS) instructions
+            is supported as ratified at commit 5059e0ca641c ("update to
+            ratified") of the riscv-zacas.
+
         - const: zba
           description: |
             The standard Zba bit-manipulation extension for address generation
@@ -190,12 +196,111 @@ properties:
             multiplication as ratified at commit 6d33919 ("Merge pull request
             #158 from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
 
+        - const: zbkb
+          description:
+            The standard Zbkb bitmanip instructions for cryptography as ratified
+            in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zbkc
+          description:
+            The standard Zbkc carry-less multiply instructions as ratified
+            in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zbkx
+          description:
+            The standard Zbkx crossbar permutation instructions as ratified
+            in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
         - const: zbs
           description: |
             The standard Zbs bit-manipulation extension for single-bit
             instructions as ratified at commit 6d33919 ("Merge pull request #158
             from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
 
+        - const: zfa
+          description:
+            The standard Zfa extension for additional floating point
+            instructions, as ratified in commit 056b6ff ("Zfa is ratified") of
+            riscv-isa-manual.
+
+        - const: zfh
+          description:
+            The standard Zfh extension for 16-bit half-precision binary
+            floating-point instructions, as ratified in commit 64074bc ("Update
+            version numbers for Zfh/Zfinx") of riscv-isa-manual.
+
+        - const: zfhmin
+          description:
+            The standard Zfhmin extension which provides minimal support for
+            16-bit half-precision binary floating-point instructions, as ratified
+            in commit 64074bc ("Update version numbers for Zfh/Zfinx") of
+            riscv-isa-manual.
+
+        - const: zk
+          description:
+            The standard Zk Standard Scalar cryptography extension as ratified
+            in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zkn
+          description:
+            The standard Zkn NIST algorithm suite extensions as ratified in
+            version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zknd
+          description: |
+            The standard Zknd for NIST suite: AES decryption instructions as
+            ratified in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zkne
+          description: |
+            The standard Zkne for NIST suite: AES encryption instructions as
+            ratified in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zknh
+          description: |
+            The standard Zknh for NIST suite: hash function instructions as
+            ratified in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zkr
+          description:
+            The standard Zkr entropy source extension as ratified in version
+            1.0 of RISC-V Cryptography Extensions Volume I specification.
+            This string being present means that the CSR associated to this
+            extension is accessible at the privilege level to which that
+            device-tree has been provided.
+
+        - const: zks
+          description:
+            The standard Zks ShangMi algorithm suite extensions as ratified in
+            version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zksed
+          description: |
+            The standard Zksed for ShangMi suite: SM4 block cipher instructions
+            as ratified in version 1.0 of RISC-V Cryptography Extensions
+            Volume I specification.
+
+        - const: zksh
+          description: |
+            The standard Zksh for ShangMi suite: SM3 hash function instructions
+            as ratified in version 1.0 of RISC-V Cryptography Extensions
+            Volume I specification.
+
+        - const: zkt
+          description:
+            The standard Zkt for data independent execution latency as ratified
+            in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
         - const: zicbom
           description:
             The standard Zicbom extension for base cache management operations as
@@ -246,6 +351,12 @@ properties:
             The standard Zihintpause extension for pause hints, as ratified in
             commit d8ab5c7 ("Zihintpause is ratified") of the riscv-isa-manual.
 
+        - const: zihintntl
+          description:
+            The standard Zihintntl extension for non-temporal locality hints, as
+            ratified in commit 0dc91f5 ("Zihintntl is ratified") of the
+            riscv-isa-manual.
+
         - const: zihpm
           description:
             The standard Zihpm extension for hardware performance counters, as
@@ -258,5 +369,113 @@ properties:
             in commit 2e5236 ("Ztso is now ratified.") of the
             riscv-isa-manual.
 
+        - const: zvbb
+          description:
+            The standard Zvbb extension for vectored basic bit-manipulation
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvbc
+          description:
+            The standard Zvbc extension for vectored carryless multiplication
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvfh
+          description:
+            The standard Zvfh extension for vectored half-precision
+            floating-point instructions, as ratified in commit e2ccd05
+            ("Remove draft warnings from Zvfh[min]") of riscv-v-spec.
+
+        - const: zvfhmin
+          description:
+            The standard Zvfhmin extension for vectored minimal half-precision
+            floating-point instructions, as ratified in commit e2ccd05
+            ("Remove draft warnings from Zvfh[min]") of riscv-v-spec.
+
+        - const: zvkb
+          description:
+            The standard Zvkb extension for vector cryptography bit-manipulation
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvkg
+          description:
+            The standard Zvkg extension for vector GCM/GMAC instructions, as
+            ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc")
+            of riscv-crypto.
+
+        - const: zvkn
+          description:
+            The standard Zvkn extension for NIST algorithm suite instructions, as
+            ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc")
+            of riscv-crypto.
+
+        - const: zvknc
+          description:
+            The standard Zvknc extension for NIST algorithm suite with carryless
+            multiply instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvkned
+          description:
+            The standard Zvkned extension for Vector AES block cipher
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvkng
+          description:
+            The standard Zvkng extension for NIST algorithm suite with GCM
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvknha
+          description: |
+            The standard Zvknha extension for NIST suite: vector SHA-2 secure,
+            hash (SHA-256 only) instructions, as ratified in commit
+            56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvknhb
+          description: |
+            The standard Zvknhb extension for NIST suite: vector SHA-2 secure,
+            hash (SHA-256 and SHA-512) instructions, as ratified in commit
+            56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvks
+          description:
+            The standard Zvks extension for ShangMi algorithm suite
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvksc
+          description:
+            The standard Zvksc extension for ShangMi algorithm suite with
+            carryless multiplication instructions, as ratified in commit 56ed795
+            ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvksed
+          description: |
+            The standard Zvksed extension for ShangMi suite: SM4 block cipher
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvksh
+          description: |
+            The standard Zvksh extension for ShangMi suite: SM3 secure hash
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvksg
+          description:
+            The standard Zvksg extension for ShangMi algorithm suite with GCM
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvkt
+          description:
+            The standard Zvkt extension for vector data-independent execution
+            latency, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
 additionalProperties: true
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/riscv/sophgo.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/riscv/sophgo.yaml
index 86748c5390be..9bc813dad098 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/riscv/sophgo.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/riscv/sophgo.yaml
@@ -22,6 +22,10 @@ properties:
           - enum:
               - milkv,duo
           - const: sophgo,cv1800b
+      - items:
+          - enum:
+              - sophgo,huashan-pi
+          - const: sophgo,cv1812h
       - items:
           - enum:
               - milkv,pioneer
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/rng/starfive,jh7110-trng.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/rng/starfive,jh7110-trng.yaml
index 2b76ce25acc4..4639247e9e51 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/rng/starfive,jh7110-trng.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/rng/starfive,jh7110-trng.yaml
@@ -11,7 +11,11 @@ maintainers:
 
 properties:
   compatible:
-    const: starfive,jh7110-trng
+    oneOf:
+      - items:
+          - const: starfive,jh8100-trng
+          - const: starfive,jh7110-trng
+      - const: starfive,jh7110-trng
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/rtc/adi,max31335.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
new file mode 100644
index 000000000000..0125cf6727cc
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/adi,max31335.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31335 RTC
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description:
+  Analog Devices MAX31335 I2C RTC ±2ppm Automotive Real-Time Clock with
+  Integrated MEMS Resonator.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: adi,max31335
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    description:
+      RTC can be used as a clock source through its clock output pin.
+    const: 0
+
+  adi,tc-diode:
+    description:
+      Select the diode configuration for the trickle charger.
+      schottky - Schottky diode in series.
+      standard+schottky - standard diode + Schottky diode in series.
+    enum: [schottky, standard+schottky]
+
+  trickle-resistor-ohms:
+    description:
+      Selected resistor for trickle charger. Should be specified if trickle
+      charger should be enabled.
+    enum: [3000, 6000, 11000]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@68 {
+            compatible = "adi,max31335";
+            reg = <0x68>;
+            pinctrl-0 = <&rtc_nint_pins>;
+            interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
+            aux-voltage-chargeable = <1>;
+            trickle-resistor-ohms = <6000>;
+            adi,tc-diode = "schottky";
+        };
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml
index 1df7c45d95c1..b770149c5fd6 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml
@@ -29,6 +29,8 @@ properties:
 
   trickle-diode-disable: true
 
+  wakeup-source: true
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/rtc/nuvoton,ma35d1-rtc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/nuvoton,ma35d1-rtc.yaml
new file mode 100644
index 000000000000..5e4ade803eed
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/nuvoton,ma35d1-rtc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nuvoton,ma35d1-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Real Time Clock
+
+maintainers:
+  - Min-Jen Chen <mjchen@nuvoton.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,ma35d1-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+    rtc@40410000 {
+        compatible = "nuvoton,ma35d1-rtc";
+        reg = <0x40410000 0x200>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&clk RTC_GATE>;
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
index b95a69cc9ae0..d274bb7a534b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
@@ -61,27 +61,27 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/spmi/spmi.h>
-    spmi_bus: spmi@c440000 {
-      reg = <0x0c440000 0x1100>;
-      #address-cells = <2>;
-      #size-cells = <0>;
-      pmicintc: pmic@0 {
-        reg = <0x0 SPMI_USID>;
-        compatible = "qcom,pm8921";
-        interrupts = <104 8>;
-        #interrupt-cells = <2>;
-        interrupt-controller;
-        #address-cells = <1>;
+
+    spmi {
+        #address-cells = <2>;
         #size-cells = <0>;
 
-        pm8921_rtc: rtc@11d {
-          compatible = "qcom,pm8921-rtc";
-          reg = <0x11d>;
-          interrupts = <0x27 0>;
-          nvmem-cells = <&rtc_offset>;
-          nvmem-cell-names = "offset";
+        pmic@0 {
+            compatible = "qcom,pm8941", "qcom,spmi-pmic";
+            reg = <0x0 SPMI_USID>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            rtc@6000 {
+                compatible = "qcom,pm8941-rtc";
+                reg = <0x6000>, <0x6100>;
+                reg-names = "rtc", "alarm";
+                interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+                nvmem-cells = <&rtc_offset>;
+                nvmem-cell-names = "offset";
+            };
         };
-      };
     };
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml
index d51b236939bf..bf4e11d6dffb 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml
@@ -17,6 +17,11 @@ properties:
           - samsung,s3c2416-rtc
           - samsung,s3c2443-rtc
           - samsung,s3c6410-rtc
+      - items:
+          - enum:
+              - samsung,exynos7-rtc
+              - samsung,exynos850-rtc
+          - const: samsung,s3c6410-rtc
       - const: samsung,exynos3250-rtc
         deprecated: true
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/google,cr50.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/security/tpm/google,cr50.txt
deleted file mode 100644
index cd69c2efdd37..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/google,cr50.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* H1 Secure Microcontroller with Cr50 Firmware on SPI Bus.
-
-H1 Secure Microcontroller running Cr50 firmware provides several
-functions, including TPM-like functionality. It communicates over
-SPI using the FIFO protocol described in the PTP Spec, section 6.
-
-Required properties:
-- compatible: Should be "google,cr50".
-- spi-max-frequency: Maximum SPI frequency.
-
-Example:
-
-&spi0 {
-	tpm@0 {
-		compatible = "google,cr50";
-		reg = <0>;
-		spi-max-frequency = <800000>;
-	};
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt
deleted file mode 100644
index d89f99971368..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Device Tree Bindings for IBM Virtual Trusted Platform Module(vtpm)
-
-Required properties:
-
-- compatible            : property name that conveys the platform architecture
-                          identifiers, as 'IBM,vtpm'
-- device_type           : specifies type of virtual device
-- interrupts            : property specifying the interrupt source number and
-                          sense code associated with this virtual I/O Adapters
-- ibm,my-drc-index      : integer index for the connector between the device
-                          and its parent - present only if Dynamic
-                          Reconfiguration(DR) Connector is enabled
-- ibm,#dma-address-cells: specifies the number of cells that are used to
-                          encode the physical address field of dma-window
-                          properties
-- ibm,#dma-size-cells   : specifies the number of cells that are used to
-                          encode the size field of dma-window properties
-- ibm,my-dma-window     : specifies DMA window associated with this virtual
-                          IOA
-- ibm,loc-code          : specifies the unique and persistent location code
-                          associated with this virtual I/O Adapters
-- linux,sml-base        : 64-bit base address of the reserved memory allocated
-                          for the firmware event log
-- linux,sml-size        : size of the memory allocated for the firmware event log
-
-Example (IBM Virtual Trusted Platform Module)
----------------------------------------------
-
-                vtpm@30000003 {
-                        ibm,#dma-size-cells = <0x2>;
-                        compatible = "IBM,vtpm";
-                        device_type = "IBM,vtpm";
-                        ibm,my-drc-index = <0x30000003>;
-                        ibm,#dma-address-cells = <0x2>;
-                        linux,sml-base = <0xc60e 0x0>;
-                        interrupts = <0xa0003 0x0>;
-                        ibm,my-dma-window = <0x10000003 0x0 0x0 0x0 0x10000000>;
-                        ibm,loc-code = "U8286.41A.10082DV-V3-C3";
-                        reg = <0x30000003>;
-                        linux,sml-size = <0xbce10200>;
-                };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
deleted file mode 100644
index 0dc121b6eace..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* STMicroelectronics SAS. ST33ZP24 TPM SoC
-
-Required properties:
-- compatible: Should be "st,st33zp24-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-
-Optional ST33ZP24 Properties:
-- interrupts: GPIO interrupt to which the chip is connected
-- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
-If set, power must be present when the platform is going into sleep/hibernate mode.
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2):
-
-&i2c2 {
-
-
-        st33zp24: st33zp24@13 {
-
-                compatible = "st,st33zp24-i2c";
-
-                reg = <0x13>;
-                clock-frequency = <400000>;
-
-                interrupt-parent = <&gpio5>;
-                interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-
-                lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
-        };
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
deleted file mode 100644
index 37198971f17b..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* STMicroelectronics SAS. ST33ZP24 TPM SoC
-
-Required properties:
-- compatible: Should be "st,st33zp24-spi".
-- spi-max-frequency: Maximum SPI frequency (<= 10000000).
-
-Optional ST33ZP24 Properties:
-- interrupts: GPIO interrupt to which the chip is connected
-- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
-If set, power must be present when the platform is going into sleep/hibernate mode.
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4):
-
-&mcspi4 {
-
-
-        st33zp24@0 {
-
-                compatible = "st,st33zp24-spi";
-
-                spi-max-frequency = <10000000>;
-
-                interrupt-parent = <&gpio5>;
-                interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-
-                lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
-        };
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
deleted file mode 100644
index a65d7b71e81a..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Device Tree Bindings for I2C based Trusted Platform Module(TPM)
-
-Required properties:
-
-- compatible     : 'manufacturer,model', eg. nuvoton,npct650
-- label          : human readable string describing the device, eg. "tpm"
-- linux,sml-base : 64-bit base address of the reserved memory allocated for
-                   the firmware event log
-- linux,sml-size : size of the memory allocated for the firmware event log
-
-Optional properties:
-
-- powered-while-suspended: present when the TPM is left powered on between
-                           suspend and resume (makes the suspend/resume
-                           callbacks do nothing).
-
-Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C)
-----------------------------------------------------------
-
-tpm@57 {
-	reg = <0x57>;
-	label = "tpm";
-	compatible = "nuvoton,npct650", "nuvoton,npct601";
-	linux,sml-base = <0x7f 0xfd450000>;
-	linux,sml-size = <0x10000>;
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt
deleted file mode 100644
index 7c6304426da1..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Trusted Computing Group MMIO Trusted Platform Module
-
-The TCG defines multi vendor standard for accessing a TPM chip, this
-is the standard protocol defined to access the TPM via MMIO. Typically
-this interface will be implemented over Intel's LPC bus.
-
-Refer to the 'TCG PC Client Specific TPM Interface Specification (TIS)' TCG
-publication for the specification.
-
-Required properties:
-
-- compatible: should contain a string below for the chip, followed by
-              "tcg,tpm-tis-mmio". Valid chip strings are:
-	          * "atmel,at97sc3204"
-- reg: The location of the MMIO registers, should be at least 0x5000 bytes
-- interrupts: An optional interrupt indicating command completion.
-
-Example:
-
-	tpm_tis@90000 {
-				compatible = "atmel,at97sc3204", "tcg,tpm-tis-mmio";
-				reg = <0x90000 0x5000>;
-				interrupt-parent = <&EIC0>;
-				interrupts = <1 2>;
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt
deleted file mode 100644
index b800667da92b..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Required properties:
-- compatible: should be one of the following
-    "st,st33htpm-spi"
-    "infineon,slb9670"
-    "tcg,tpm_tis-spi"
-- spi-max-frequency: Maximum SPI frequency (depends on TPMs).
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBoard xM with TPM_TIS on SPI4):
-
-&mcspi4 {
-
-
-        tpm_tis@0 {
-
-                compatible = "tcg,tpm_tis-spi";
-
-                spi-max-frequency = <10000000>;
-        };
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/arm,dcc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/arm,dcc.yaml
new file mode 100644
index 000000000000..fd0589356617
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/arm,dcc.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/arm,dcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM DCC (Data communication channel) serial emulation
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+description: |
+  ARM DCC (Data communication channel) serial emulation interface available
+  via JTAG can be also used as one of serial line tightly coupled with every
+  ARM CPU available in the system.
+
+properties:
+  compatible:
+    const: arm,dcc
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+      compatible = "arm,dcc";
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
index 920539926d7e..7a105551fa6a 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
@@ -13,7 +13,7 @@ description: |
   https://www.nxp.com/webapp/Download?colCode=S32V234RM.
 
 maintainers:
-  - Chester Lin <clin@suse.com>
+  - Chester Lin <chester62515@gmail.com>
 
 allOf:
   - $ref: serial.yaml#
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
index 83035553044a..9c6dc16f88a6 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -9,10 +9,6 @@ title: Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
 maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
-allOf:
-  - $ref: serial.yaml#
-  - $ref: rs485.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -68,7 +64,11 @@ properties:
       - const: tx
 
   interrupts:
-    maxItems: 1
+    items:
+      - description: UART RX Interrupt
+      - description: UART TX Interrupt
+      - description: UART RTS Interrupt
+    minItems: 1
 
   wakeup-source: true
 
@@ -110,6 +110,25 @@ required:
   - clock-names
   - interrupts
 
+allOf:
+  - $ref: serial.yaml#
+  - $ref: rs485.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx1-uart
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
index ee52bf8e8917..e0fa363ad7e2 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
@@ -48,9 +48,17 @@ properties:
       - const: tx
       - const: rx
 
+  interconnects:
+    maxItems: 1
+
   interrupts:
     maxItems: 1
 
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
   qcom,rx-crci:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -99,7 +107,9 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interconnect/qcom,msm8996.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
 
     serial@f991e000 {
         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
@@ -109,4 +119,7 @@ examples:
         clock-names = "core", "iface";
         dmas = <&dma0 0>, <&dma0 1>;
         dma-names = "tx", "rx";
+        power-domains = <&rpmpd MSM8996_VDDCX>;
+        operating-points-v2 = <&uart_opp_table>;
+        interconnects = <&pnoc MASTER_BLSP_1 &bimc SLAVE_EBI_CH0>;
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/renesas,sci.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/renesas,sci.yaml
index 9f7305200c47..64d3db6e54e5 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/renesas,sci.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/renesas,sci.yaml
@@ -17,7 +17,7 @@ properties:
     oneOf:
       - items:
           - enum:
-              - renesas,r9a07g043-sci     # RZ/G2UL
+              - renesas,r9a07g043-sci     # RZ/G2UL and RZ/Five
               - renesas,r9a07g044-sci     # RZ/G2{L,LC}
               - renesas,r9a07g054-sci     # RZ/V2L
           - const: renesas,sci            # generic SCI compatible UART
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/samsung_uart.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/samsung_uart.yaml
index ac60ab1e35e3..133259ed3a34 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/samsung_uart.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -18,17 +18,29 @@ description: |+
 properties:
   compatible:
     oneOf:
-      - items:
-          - const: samsung,exynosautov9-uart
-          - const: samsung,exynos850-uart
       - enum:
           - apple,s5l-uart
           - axis,artpec8-uart
+          - google,gs101-uart
           - samsung,s3c6400-uart
           - samsung,s5pv210-uart
           - samsung,exynos4210-uart
           - samsung,exynos5433-uart
           - samsung,exynos850-uart
+      - items:
+          - enum:
+              - samsung,exynos7-uart
+              - tesla,fsd-uart
+          - const: samsung,exynos4210-uart
+      - items:
+          - enum:
+              - samsung,exynos7885-uart
+          - const: samsung,exynos5433-uart
+      - items:
+          - enum:
+              - samsung,exynosautov9-uart
+              - samsung,exynosautov920-uart
+          - const: samsung,exynos850-uart
 
   reg:
     maxItems: 1
@@ -122,6 +134,16 @@ allOf:
             - const: uart
             - const: clk_uart_baud0
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-uart
+    then:
+      required:
+        - samsung,uart-fifosize
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
index 17c553123f96..1001d2a6ace8 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: serial.yaml#
+  - $ref: rs485.yaml#
 
 properties:
   compatible:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/sprd-uart.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/sprd-uart.yaml
index 28ff77aa86c8..f4dbb6dc2b6e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/serial/sprd-uart.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/sprd-uart.yaml
@@ -20,6 +20,7 @@ properties:
               - sprd,sc9860-uart
               - sprd,sc9863a-uart
               - sprd,ums512-uart
+              - sprd,ums9620-uart
           - const: sprd,sc9836-uart
       - const: sprd,sc9836-uart
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
index 16977e4e4357..c6bce40946d4 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
@@ -158,3 +158,36 @@ examples:
             };
         };
     };
+
+  - |
+    system-controller@ff63c000 {
+        compatible = "amlogic,meson-axg-hhi-sysctrl", "simple-mfd", "syscon";
+        reg = <0xff63c000 0x400>;
+
+        clock-controller {
+            compatible = "amlogic,axg-clkc";
+            #clock-cells = <1>;
+            clocks = <&xtal>;
+            clock-names = "xtal";
+        };
+
+        power-controller {
+           compatible = "amlogic,meson-axg-pwrc";
+           #power-domain-cells = <1>;
+           amlogic,ao-sysctrl = <&sysctrl_AO>;
+
+           resets = <&reset_viu>,
+                    <&reset_venc>,
+                    <&reset_vcbus>,
+                    <&reset_vencl>,
+                    <&reset_vid_lock>;
+           reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock";
+           clocks = <&clk_vpu>, <&clk_vapb>;
+           clock-names = "vpu", "vapb";
+        };
+
+        phy {
+           compatible = "amlogic,axg-mipi-pcie-analog-phy";
+           #phy-cells = <0>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
index a06ac2177444..4737e5f45d54 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
@@ -41,7 +41,6 @@ properties:
               - mediatek,mt8173-pwrap
               - mediatek,mt8183-pwrap
               - mediatek,mt8186-pwrap
-              - mediatek,mt8188-pwrap
               - mediatek,mt8195-pwrap
               - mediatek,mt8365-pwrap
               - mediatek,mt8516-pwrap
@@ -50,6 +49,11 @@ properties:
               - mediatek,mt8186-pwrap
               - mediatek,mt8195-pwrap
           - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt8188-pwrap
+          - const: mediatek,mt8195-pwrap
+          - const: syscon
 
   reg:
     minItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
index 7eda63d5682f..742b91d1d28e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
@@ -22,8 +22,10 @@ properties:
   compatible:
     enum:
       - mediatek,mt8183-svs
+      - mediatek,mt8186-svs
       - mediatek,mt8188-svs
       - mediatek,mt8192-svs
+      - mediatek,mt8195-svs
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
index 365a9fed5914..a3fa04f3a1bd 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
@@ -26,6 +26,16 @@ properties:
   compatible:
     const: microchip,mpfs-sys-controller
 
+  microchip,bitstream-flash:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The SPI flash connected to the system controller's QSPI controller.
+      The system controller may retrieve FPGA bitstreams from this flash to
+      perform In-Application Programming (IAP) or during device initialisation
+      for Auto Update. The MSS and system controller have separate QSPI
+      controllers and this flash is connected to both. Software running in the
+      MSS can write bitstreams to the flash.
+
 required:
   - compatible
   - mboxes
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
index d1c7c2be865f..b4478f417edc 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -38,6 +38,8 @@ properties:
           - qcom,sm8350-aoss-qmp
           - qcom,sm8450-aoss-qmp
           - qcom,sm8550-aoss-qmp
+          - qcom,sm8650-aoss-qmp
+          - qcom,x1e80100-aoss-qmp
       - const: qcom,aoss-qmp
 
   reg:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
index 422921cf1f82..61df97ffe1e4 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
@@ -20,14 +20,20 @@ description:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - qcom,sc8180x-pmic-glink
-          - qcom,sc8280xp-pmic-glink
-          - qcom,sm8350-pmic-glink
-          - qcom,sm8450-pmic-glink
-          - qcom,sm8550-pmic-glink
-      - const: qcom,pmic-glink
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sc8180x-pmic-glink
+              - qcom,sc8280xp-pmic-glink
+              - qcom,sm8350-pmic-glink
+              - qcom,sm8450-pmic-glink
+              - qcom,sm8550-pmic-glink
+          - const: qcom,pmic-glink
+      - items:
+          - enum:
+              - qcom,sm8650-pmic-glink
+          - const: qcom,sm8550-pmic-glink
+          - const: qcom,pmic-glink
 
   '#address-cells':
     const: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
index 96a7f1822022..686a7ef2f48a 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
@@ -31,10 +31,24 @@ properties:
   reg:
     maxItems: 1
 
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM
+
 required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            const: qcom,rpmh-stats
+    then:
+      properties:
+        qcom,qmp: false
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 1309bf5ae0cd..9793ea6f0fe6 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -28,6 +28,8 @@ properties:
               - rockchip,rk3588-sys-grf
               - rockchip,rk3588-pcie3-phy-grf
               - rockchip,rk3588-pcie3-pipe-grf
+              - rockchip,rk3588-vo-grf
+              - rockchip,rk3588-vop-grf
               - rockchip,rv1108-usbgrf
           - const: syscon
       - items:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
index e1d716df5dfa..15fcd8f1d8bc 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
@@ -15,6 +15,7 @@ select:
     compatible:
       contains:
         enum:
+          - google,gs101-pmu
           - samsung,exynos3250-pmu
           - samsung,exynos4210-pmu
           - samsung,exynos4212-pmu
@@ -35,6 +36,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - google,gs101-pmu
               - samsung,exynos3250-pmu
               - samsung,exynos4210-pmu
               - samsung,exynos4212-pmu
@@ -48,6 +50,14 @@ properties:
               - samsung,exynos850-pmu
               - samsung-s5pv210-pmu
           - const: syscon
+      - items:
+          - enum:
+              - samsung,exynos7885-pmu
+              - samsung,exynosautov9-pmu
+              - samsung,exynosautov920-pmu
+              - tesla,fsd-pmu
+          - const: samsung,exynos7-pmu
+          - const: syscon
       - items:
           - enum:
               - samsung,exynos3250-pmu
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
index a6836904a4f8..8b478d6cdc30 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
@@ -24,7 +24,10 @@ properties:
   compatible:
     oneOf:
       - items:
-          - const: samsung,exynosautov9-usi
+          - enum:
+              - google,gs101-usi
+              - samsung,exynosautov9-usi
+              - samsung,exynosautov920-usi
           - const: samsung,exynos850-usi
       - enum:
           - samsung,exynos850-usi
@@ -155,7 +158,7 @@ examples:
         };
 
         hsi2c_0: i2c@13820000 {
-            compatible = "samsung,exynosautov9-hsi2c";
+            compatible = "samsung,exynos850-hsi2c", "samsung,exynosautov9-hsi2c";
             reg = <0x13820000 0xc0>;
             interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
             #address-cells = <1>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml
index 163e912e9cad..1794e3799f21 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml
@@ -14,9 +14,14 @@ properties:
     oneOf:
       - items:
           - enum:
+              - google,gs101-apm-sysreg
+              - google,gs101-peric0-sysreg
+              - google,gs101-peric1-sysreg
               - samsung,exynos3-sysreg
               - samsung,exynos4-sysreg
               - samsung,exynos5-sysreg
+              - samsung,exynosautov920-peric0-sysreg
+              - samsung,exynosautov920-peric1-sysreg
               - tesla,fsd-cam-sysreg
               - tesla,fsd-fsys0-sysreg
               - tesla,fsd-fsys1-sysreg
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/xilinx.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
similarity index 95%
rename from Documentation/devicetree/bindings/arm/xilinx.yaml
rename to Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
index f57ed0347894..d4c0fe1fe435 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/arm/xilinx.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/xilinx.yaml#
+$id: http://devicetree.org/schemas/soc/xilinx/xilinx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Xilinx Zynq Platforms
@@ -132,6 +132,11 @@ properties:
           - const: xlnx,zynqmp-smk-k26
           - const: xlnx,zynqmp
 
+      - description: AMD MicroBlaze V (QEMU)
+        items:
+          - const: qemu,mbv
+          - const: amd,mbv
+
 additionalProperties: true
 
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/adi,max98363.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/adi,max98363.yaml
index a844b63f3930..c388cda56011 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/adi,max98363.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/adi,max98363.yaml
@@ -39,7 +39,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    soundwire-controller@3250000 {
+    soundwire@3250000 {
         #address-cells = <2>;
         #size-cells = <0>;
         reg = <0x3250000 0x2000>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
index 8108c564dd78..aa32dc950e72 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
@@ -22,6 +22,7 @@ properties:
       - const: allwinner,sun6i-a31-spdif
       - const: allwinner,sun8i-h3-spdif
       - const: allwinner,sun50i-h6-spdif
+      - const: allwinner,sun50i-h616-spdif
       - items:
           - const: allwinner,sun8i-a83t-spdif
           - const: allwinner,sun8i-h3-spdif
@@ -62,6 +63,8 @@ allOf:
             enum:
               - allwinner,sun6i-a31-spdif
               - allwinner,sun8i-h3-spdif
+              - allwinner,sun50i-h6-spdif
+              - allwinner,sun50i-h616-spdif
 
     then:
       required:
@@ -73,7 +76,7 @@ allOf:
           contains:
             enum:
               - allwinner,sun8i-h3-spdif
-              - allwinner,sun50i-h6-spdif
+              - allwinner,sun50i-h616-spdif
 
     then:
       properties:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/audio-graph-port.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
index 60b5e3fd1115..b13c08de505e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
@@ -19,6 +19,12 @@ definitions:
     properties:
       mclk-fs:
         $ref: simple-card.yaml#/definitions/mclk-fs
+      playback-only:
+        description: port connection used only for playback
+        $ref: /schemas/types.yaml#/definitions/flag
+      capture-only:
+        description: port connection used only for capture
+        $ref: /schemas/types.yaml#/definitions/flag
 
   endpoint-base:
     allOf:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/es8328.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/es8328.txt
deleted file mode 100644
index 33fbf058c997..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/es8328.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Everest ES8328 audio CODEC
-
-This device supports both I2C and SPI.
-
-Required properties:
-
-  - compatible  : Should be "everest,es8328" or "everest,es8388"
-  - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V
-  - AVDD-supply : Regulator providing analog supply voltage 3.3V
-  - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V
-  - IPVDD-supply : Regulator providing analog output voltage 3.3V
-  - clocks : A 22.5792 or 11.2896 MHz clock
-  - reg : the I2C address of the device for I2C, the chip select number for SPI
-
-Pins on the device (for linking into audio routes):
-
-  * LOUT1
-  * LOUT2
-  * ROUT1
-  * ROUT2
-  * LINPUT1
-  * RINPUT1
-  * LINPUT2
-  * RINPUT2
-  * Mic Bias
-
-
-Example:
-
-codec: es8328@11 {
-	compatible = "everest,es8328";
-	DVDD-supply = <&reg_3p3v>;
-	AVDD-supply = <&reg_3p3v>;
-	PVDD-supply = <&reg_3p3v>;
-	HPVDD-supply = <&reg_3p3v>;
-	clocks = <&clks 169>;
-	reg = <0x11>;
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/everest,es8328.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/everest,es8328.yaml
new file mode 100644
index 000000000000..a0f4670fa38c
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/everest,es8328.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8328 audio CODEC
+
+description:
+  Everest Audio Codec, which can be connected via I2C or SPI.
+  Pins on the device (for linking into audio routes) are
+  * LOUT1
+  * LOUT2
+  * ROUT1
+  * ROUT2
+  * LINPUT1
+  * RINPUT1
+  * LINPUT2
+  * RINPUT2
+  * Mic Bias
+
+maintainers:
+  - David Yang <yangxiaohua@everest-semi.com>
+
+properties:
+  compatible:
+    enum:
+      - everest,es8328
+      - everest,es8388
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: A 22.5792 or 11.2896 MHz clock
+
+  DVDD-supply:
+    description: Regulator providing digital core supply voltage 1.8 - 3.6V
+
+  AVDD-supply:
+    description: Regulator providing analog supply voltage 3.3V
+
+  PVDD-supply:
+    description: Regulator providing digital IO supply voltage 1.8 - 3.6V
+
+  HPVDD-supply:
+    description: Regulator providing analog output voltage 3.3V
+
+required:
+  - compatible
+  - clocks
+  - DVDD-supply
+  - AVDD-supply
+  - PVDD-supply
+  - HPVDD-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      es8328: codec@11 {
+        compatible = "everest,es8328";
+        reg = <0x11>;
+        AVDD-supply = <&reg_3p3v>;
+        DVDD-supply = <&reg_3p3v>;
+        HPVDD-supply = <&reg_3p3v>;
+        PVDD-supply = <&reg_3p3v>;
+        clocks = <&clks 169>;
+      };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/fsl,mqs.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,mqs.txt
deleted file mode 100644
index d66284b8bef2..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/fsl,mqs.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-fsl,mqs audio CODEC
-
-Required properties:
-  - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs"
-		"fsl,imx8qm-mqs", "fsl,imx8qxp-mqs", "fsl,imx93-mqs".
-  - clocks : A list of phandles + clock-specifiers, one for each entry in
-	     clock-names
-  - clock-names : "mclk" - must required.
-		  "core" - required if compatible is "fsl,imx8qm-mqs", it
-		           is for register access.
-  - gpr : A phandle of General Purpose Registers in IOMUX Controller.
-	  Required if compatible is "fsl,imx6sx-mqs".
-
-Required if compatible is "fsl,imx8qm-mqs":
-  - power-domains: A phandle of PM domain provider node.
-  - reg: Offset and length of the register set for the device.
-
-Example:
-
-mqs: mqs {
-	compatible = "fsl,imx6sx-mqs";
-	gpr = <&gpr>;
-	clocks = <&clks IMX6SX_CLK_SAI1>;
-	clock-names = "mclk";
-	status = "disabled";
-};
-
-mqs: mqs@59850000 {
-	compatible = "fsl,imx8qm-mqs";
-	reg = <0x59850000 0x10000>;
-	clocks = <&clk IMX8QM_AUD_MQS_IPG>,
-		 <&clk IMX8QM_AUD_MQS_HMCLK>;
-	clock-names = "core", "mclk";
-	power-domains = <&pd_mqs0>;
-	status = "disabled";
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/fsl,mqs.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,mqs.yaml
new file mode 100644
index 000000000000..8b33353a80ca
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,mqs.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,mqs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Medium Quality Sound (MQS)
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+  - Chancel Liu <chancel.liu@nxp.com>
+
+description: |
+  Medium quality sound (MQS) is used to generate medium quality audio
+  via a standard GPIO in the pinmux, allowing the user to connect
+  stereo speakers or headphones to a power amplifier without an
+  additional DAC chip.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-mqs
+      - fsl,imx8qm-mqs
+      - fsl,imx8qxp-mqs
+      - fsl,imx93-mqs
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the General Purpose Register (GPR) node
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-mqs
+              - fsl,imx8qxp-mqs
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Master clock
+            - description: Clock for register access
+        clock-names:
+          items:
+            - const: mclk
+            - const: core
+      required:
+        - reg
+        - power-domains
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Master clock
+        clock-names:
+          items:
+            - const: mclk
+      required:
+        - gpr
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6sx-clock.h>
+    mqs0: mqs {
+        compatible = "fsl,imx6sx-mqs";
+        gpr = <&gpr>;
+        clocks = <&clks IMX6SX_CLK_SAI1>;
+        clock-names = "mclk";
+    };
+
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    mqs1: mqs@59850000 {
+        compatible = "fsl,imx8qm-mqs";
+        reg = <0x59850000 0x10000>;
+        clocks = <&mqs0_lpcg 0>, <&mqs0_lpcg 1>;
+        clock-names = "mclk", "core";
+        power-domains = <&pd IMX_SC_R_MQS_0>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
index 799b362ba498..0eb0c1ba8710 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
@@ -38,7 +38,10 @@ properties:
       - const: txfifo
 
   interrupts:
-    maxItems: 1
+    items:
+      - description: WAKEUPMIX Audio XCVR Interrupt 1
+      - description: WAKEUPMIX Audio XCVR Interrupt 2
+    minItems: 1
 
   clocks:
     items:
@@ -78,6 +81,23 @@ required:
   - dma-names
   - resets
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx93-xcvr
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
index ec4b6e547ca6..cdcd7c6f21eb 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
@@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Google SC7280-Herobrine ASoC sound card driver
 
 maintainers:
-  - Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
   - Judy Hsiao <judyhsiao@chromium.org>
 
 description:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/mediatek,mt2701-audio.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/mediatek,mt2701-audio.yaml
new file mode 100644
index 000000000000..45382c4d86aa
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/mediatek,mt2701-audio.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt2701-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Audio Front End (AFE) PCM controller for mt2701
+
+description:
+  The AFE PCM node must be a subnode of the MediaTek audsys device tree node.
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@collabora.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-audio
+      - mediatek,mt7622-audio
+
+  interrupts:
+    items:
+      - description: AFE interrupt
+      - description: ASYS interrupt
+
+  interrupt-names:
+    items:
+      - const: afe
+      - const: asys
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: audio infra sys clock
+      - description: top audio mux 1
+      - description: top audio mux 2
+      - description: top audio sys a1 clock
+      - description: top audio sys a2 clock
+      - description: i2s0 source selection
+      - description: i2s1 source selection
+      - description: i2s2 source selection
+      - description: i2s3 source selection
+      - description: i2s0 source divider
+      - description: i2s1 source divider
+      - description: i2s2 source divider
+      - description: i2s3 source divider
+      - description: i2s0 master clock
+      - description: i2s1 master clock
+      - description: i2s2 master clock
+      - description: i2s3 master clock
+      - description: i2so0 hopping clock
+      - description: i2so1 hopping clock
+      - description: i2so2 hopping clock
+      - description: i2so3 hopping clock
+      - description: i2si0 hopping clock
+      - description: i2si1 hopping clock
+      - description: i2si2 hopping clock
+      - description: i2si3 hopping clock
+      - description: asrc0 output clock
+      - description: asrc1 output clock
+      - description: asrc2 output clock
+      - description: asrc3 output clock
+      - description: audio front end pd clock
+      - description: audio front end conn pd clock
+      - description: top audio a1 sys pd
+      - description: top audio a2 sys pd
+      - description: audio merge interface pd
+
+  clock-names:
+    items:
+      - const: infra_sys_audio_clk
+      - const: top_audio_mux1_sel
+      - const: top_audio_mux2_sel
+      - const: top_audio_a1sys_hp
+      - const: top_audio_a2sys_hp
+      - const: i2s0_src_sel
+      - const: i2s1_src_sel
+      - const: i2s2_src_sel
+      - const: i2s3_src_sel
+      - const: i2s0_src_div
+      - const: i2s1_src_div
+      - const: i2s2_src_div
+      - const: i2s3_src_div
+      - const: i2s0_mclk_en
+      - const: i2s1_mclk_en
+      - const: i2s2_mclk_en
+      - const: i2s3_mclk_en
+      - const: i2so0_hop_ck
+      - const: i2so1_hop_ck
+      - const: i2so2_hop_ck
+      - const: i2so3_hop_ck
+      - const: i2si0_hop_ck
+      - const: i2si1_hop_ck
+      - const: i2si2_hop_ck
+      - const: i2si3_hop_ck
+      - const: asrc0_out_ck
+      - const: asrc1_out_ck
+      - const: asrc2_out_ck
+      - const: asrc3_out_ck
+      - const: audio_afe_pd
+      - const: audio_afe_conn_pd
+      - const: audio_a1sys_pd
+      - const: audio_a2sys_pd
+      - const: audio_mrgif_pd
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
index 4c8c95057ef7..f94ad0715e32 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
@@ -15,6 +15,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - mediatek,mt8188-es8326
       - mediatek,mt8188-mt6359-evb
       - mediatek,mt8188-nau8825
       - mediatek,mt8188-rt5682s
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
deleted file mode 100644
index f548e6a58240..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
+++ /dev/null
@@ -1,146 +0,0 @@
-Mediatek AFE PCM controller for mt2701
-
-Required properties:
-- compatible: should be one of the following.
-	      - "mediatek,mt2701-audio"
-	      - "mediatek,mt7622-audio"
-- interrupts: should contain AFE and ASYS interrupts
-- interrupt-names: should be "afe" and "asys"
-- power-domains: should define the power domain
-- clocks: Must contain an entry for each entry in clock-names
-  See ../clocks/clock-bindings.txt for details
-- clock-names: should have these clock names:
-		"infra_sys_audio_clk",
-		"top_audio_mux1_sel",
-		"top_audio_mux2_sel",
-		"top_audio_a1sys_hp",
-		"top_audio_a2sys_hp",
-		"i2s0_src_sel",
-		"i2s1_src_sel",
-		"i2s2_src_sel",
-		"i2s3_src_sel",
-		"i2s0_src_div",
-		"i2s1_src_div",
-		"i2s2_src_div",
-		"i2s3_src_div",
-		"i2s0_mclk_en",
-		"i2s1_mclk_en",
-		"i2s2_mclk_en",
-		"i2s3_mclk_en",
-		"i2so0_hop_ck",
-		"i2so1_hop_ck",
-		"i2so2_hop_ck",
-		"i2so3_hop_ck",
-		"i2si0_hop_ck",
-		"i2si1_hop_ck",
-		"i2si2_hop_ck",
-		"i2si3_hop_ck",
-		"asrc0_out_ck",
-		"asrc1_out_ck",
-		"asrc2_out_ck",
-		"asrc3_out_ck",
-		"audio_afe_pd",
-		"audio_afe_conn_pd",
-		"audio_a1sys_pd",
-		"audio_a2sys_pd",
-		"audio_mrgif_pd";
-- assigned-clocks: list of input clocks and dividers for the audio system.
-		   See ../clocks/clock-bindings.txt for details.
-- assigned-clocks-parents: parent of input clocks of assigned clocks.
-- assigned-clock-rates: list of clock frequencies of assigned clocks.
-
-Must be a subnode of MediaTek audsys device tree node.
-See ../arm/mediatek/mediatek,audsys.txt for details about the parent node.
-
-Example:
-
-	audsys: audio-subsystem@11220000 {
-		compatible = "mediatek,mt2701-audsys", "syscon";
-		...
-
-		afe: audio-controller {
-			compatible = "mediatek,mt2701-audio";
-			interrupts =  <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
-				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-names	= "afe", "asys";
-			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-
-			clocks = <&infracfg CLK_INFRA_AUDIO>,
-				 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-				 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-				 <&topckgen CLK_TOP_AUD_48K_TIMING>,
-				 <&topckgen CLK_TOP_AUD_44K_TIMING>,
-				 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
-				 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
-				 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
-				 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
-				 <&audsys CLK_AUD_I2SO1>,
-				 <&audsys CLK_AUD_I2SO2>,
-				 <&audsys CLK_AUD_I2SO3>,
-				 <&audsys CLK_AUD_I2SO4>,
-				 <&audsys CLK_AUD_I2SIN1>,
-				 <&audsys CLK_AUD_I2SIN2>,
-				 <&audsys CLK_AUD_I2SIN3>,
-				 <&audsys CLK_AUD_I2SIN4>,
-				 <&audsys CLK_AUD_ASRCO1>,
-				 <&audsys CLK_AUD_ASRCO2>,
-				 <&audsys CLK_AUD_ASRCO3>,
-				 <&audsys CLK_AUD_ASRCO4>,
-				 <&audsys CLK_AUD_AFE>,
-				 <&audsys CLK_AUD_AFE_CONN>,
-				 <&audsys CLK_AUD_A1SYS>,
-				 <&audsys CLK_AUD_A2SYS>,
-				 <&audsys CLK_AUD_AFE_MRGIF>;
-
-			clock-names = "infra_sys_audio_clk",
-				      "top_audio_mux1_sel",
-				      "top_audio_mux2_sel",
-				      "top_audio_a1sys_hp",
-				      "top_audio_a2sys_hp",
-				      "i2s0_src_sel",
-				      "i2s1_src_sel",
-				      "i2s2_src_sel",
-				      "i2s3_src_sel",
-				      "i2s0_src_div",
-				      "i2s1_src_div",
-				      "i2s2_src_div",
-				      "i2s3_src_div",
-				      "i2s0_mclk_en",
-				      "i2s1_mclk_en",
-				      "i2s2_mclk_en",
-				      "i2s3_mclk_en",
-				      "i2so0_hop_ck",
-				      "i2so1_hop_ck",
-				      "i2so2_hop_ck",
-				      "i2so3_hop_ck",
-				      "i2si0_hop_ck",
-				      "i2si1_hop_ck",
-				      "i2si2_hop_ck",
-				      "i2si3_hop_ck",
-				      "asrc0_out_ck",
-				      "asrc1_out_ck",
-				      "asrc2_out_ck",
-				      "asrc3_out_ck",
-				      "audio_afe_pd",
-				      "audio_afe_conn_pd",
-				      "audio_a1sys_pd",
-				      "audio_a2sys_pd",
-				      "audio_mrgif_pd";
-
-			assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-					  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-					  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
-					  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
-			assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
-						 <&topckgen CLK_TOP_AUD2PLL_90M>;
-			assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
-		};
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
index 3e54abd4ca74..054b53954ac3 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
@@ -89,6 +89,14 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     default: 3072000
 
+  nuvoton,dmic-slew-rate:
+    description: The range 0 to 7 represents the speed of DMIC slew rate.
+        The lowest value 0 means the slowest rate and the highest value
+        7 means the fastest rate.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 7
+    default: 0
+
   nuvoton,left-input-single-end:
     description: Enable left input with single-ended settings if set.
         For the headset mic application, the single-ended control is
@@ -127,6 +135,7 @@ examples:
             nuvoton,jack-insert-debounce = <7>;
             nuvoton,jack-eject-debounce = <0>;
             nuvoton,dmic-clk-threshold = <3072000>;
+            nuvoton,dmic-slew-rate = <0>;
             #sound-dai-cells = <0>;
         };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml
index c29d7942915c..241d20f3aad0 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml
@@ -64,7 +64,7 @@ examples:
     #include <dt-bindings/clock/tegra30-car.h>
     #include <dt-bindings/soc/tegra-pmc.h>
     sound {
-        compatible = "lge,tegra-audio-max98089-p895",
+        compatible = "lg,tegra-audio-max98089-p895",
                      "nvidia,tegra-audio-max98089";
         nvidia,model = "LG Optimus Vu MAX98089";
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
index ec4b0ac8ad68..b8540b30741e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
@@ -11,12 +11,18 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7280-lpass-rx-macro
-      - qcom,sm8250-lpass-rx-macro
-      - qcom,sm8450-lpass-rx-macro
-      - qcom,sm8550-lpass-rx-macro
-      - qcom,sc8280xp-lpass-rx-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-rx-macro
+          - qcom,sm8250-lpass-rx-macro
+          - qcom,sm8450-lpass-rx-macro
+          - qcom,sm8550-lpass-rx-macro
+          - qcom,sc8280xp-lpass-rx-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-rx-macro
+              - qcom,x1e80100-lpass-rx-macro
+          - const: qcom,sm8550-lpass-rx-macro
 
   reg:
     maxItems: 1
@@ -96,8 +102,9 @@ allOf:
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,sm8550-lpass-rx-macro
+          contains:
+            enum:
+              - qcom,sm8550-lpass-rx-macro
     then:
       properties:
         clocks:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
index 962701e9eb42..3e2ae16c6aba 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
@@ -11,13 +11,19 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7280-lpass-tx-macro
-      - qcom,sm6115-lpass-tx-macro
-      - qcom,sm8250-lpass-tx-macro
-      - qcom,sm8450-lpass-tx-macro
-      - qcom,sm8550-lpass-tx-macro
-      - qcom,sc8280xp-lpass-tx-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-tx-macro
+          - qcom,sm6115-lpass-tx-macro
+          - qcom,sm8250-lpass-tx-macro
+          - qcom,sm8450-lpass-tx-macro
+          - qcom,sm8550-lpass-tx-macro
+          - qcom,sc8280xp-lpass-tx-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-tx-macro
+              - qcom,x1e80100-lpass-tx-macro
+          - const: qcom,sm8550-lpass-tx-macro
 
   reg:
     maxItems: 1
@@ -118,8 +124,9 @@ allOf:
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,sm8550-lpass-tx-macro
+          contains:
+            enum:
+              - qcom,sm8550-lpass-tx-macro
     then:
       properties:
         clocks:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
index 4a56108c444b..6b483fa3c428 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
@@ -11,12 +11,18 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7280-lpass-va-macro
-      - qcom,sm8250-lpass-va-macro
-      - qcom,sm8450-lpass-va-macro
-      - qcom,sm8550-lpass-va-macro
-      - qcom,sc8280xp-lpass-va-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-va-macro
+          - qcom,sm8250-lpass-va-macro
+          - qcom,sm8450-lpass-va-macro
+          - qcom,sm8550-lpass-va-macro
+          - qcom,sc8280xp-lpass-va-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-va-macro
+              - qcom,x1e80100-lpass-va-macro
+          - const: qcom,sm8550-lpass-va-macro
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
index eea7609d1b33..06b5f7be3608 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
@@ -11,12 +11,18 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7280-lpass-wsa-macro
-      - qcom,sm8250-lpass-wsa-macro
-      - qcom,sm8450-lpass-wsa-macro
-      - qcom,sm8550-lpass-wsa-macro
-      - qcom,sc8280xp-lpass-wsa-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-wsa-macro
+          - qcom,sm8250-lpass-wsa-macro
+          - qcom,sm8450-lpass-wsa-macro
+          - qcom,sm8550-lpass-wsa-macro
+          - qcom,sc8280xp-lpass-wsa-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-wsa-macro
+              - qcom,x1e80100-lpass-wsa-macro
+          - const: qcom,sm8550-lpass-wsa-macro
 
   reg:
     maxItems: 1
@@ -94,8 +100,9 @@ allOf:
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,sm8550-lpass-wsa-macro
+          contains:
+            enum:
+              - qcom,sm8550-lpass-wsa-macro
     then:
       properties:
         clocks:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
index e082a4fe095d..6f419747273e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
@@ -21,6 +21,11 @@ properties:
               - lenovo,yoga-c630-sndcard
               - qcom,db845c-sndcard
           - const: qcom,sdm845-sndcard
+      - items:
+          - enum:
+              - qcom,sm8550-sndcard
+              - qcom,sm8650-sndcard
+          - const: qcom,sm8450-sndcard
       - enum:
           - qcom,apq8016-sbc-sndcard
           - qcom,msm8916-qdsp6-sndcard
@@ -30,6 +35,7 @@ properties:
           - qcom,sdm845-sndcard
           - qcom,sm8250-sndcard
           - qcom,sm8450-sndcard
+          - qcom,x1e80100-sndcard
 
   audio-routing:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
index 4df59f3b7b01..beb0ff0245b0 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
@@ -201,9 +201,9 @@ examples:
   - |
     codec@1,0{
         compatible = "slim217,250";
-        reg  = <1 0>;
+        reg = <1 0>;
         reset-gpios = <&tlmm 64 0>;
-        slim-ifc-dev  = <&wcd9340_ifd>;
+        slim-ifc-dev = <&wcd9340_ifd>;
         #sound-dai-cells = <1>;
         interrupt-parent = <&tlmm>;
         interrupts = <54 4>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
index b430dd3e1841..7b31bf93f1a1 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
@@ -51,7 +51,7 @@ examples:
         reg = <0x03210000 0x2000>;
         wcd938x_rx: codec@0,4 {
             compatible = "sdw20217010d00";
-            reg  = <0 4>;
+            reg = <0 4>;
             qcom,rx-port-mapping = <1 2 3 4 5>;
         };
     };
@@ -62,7 +62,7 @@ examples:
         reg = <0x03230000 0x2000>;
         wcd938x_tx: codec@0,3 {
             compatible = "sdw20217010d00";
-            reg  = <0 3>;
+            reg = <0 3>;
             qcom,tx-port-mapping = <2 3 4 5>;
         };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
index 018565793a3e..adbfa67f88ed 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -137,7 +137,7 @@ examples:
         reg = <0x03210000 0x2000>;
         wcd938x_rx: codec@0,4 {
             compatible = "sdw20217010d00";
-            reg  = <0 4>;
+            reg = <0 4>;
             qcom,rx-port-mapping = <1 2 3 4 5>;
         };
     };
@@ -148,7 +148,7 @@ examples:
         reg = <0x03230000 0x2000>;
         wcd938x_tx: codec@0,3 {
             compatible = "sdw20217010d00";
-            reg  = <0 3>;
+            reg = <0 3>;
             qcom,tx-port-mapping = <2 3 4 5>;
         };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
index ba572a7f4f3c..8e462cdf0018 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
@@ -52,7 +52,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    soundwire-controller@3250000 {
+    soundwire@3250000 {
         #address-cells = <2>;
         #size-cells = <0>;
         reg = <0x3250000 0x2000>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
index e6723c9e312a..d717017b0fdb 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
@@ -48,7 +48,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    soundwire-controller {
+    soundwire {
         #address-cells = <2>;
         #size-cells = <0>;
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
index 13a5a0a10fe6..0d7a6b576d88 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -9,20 +9,6 @@ title: Renesas R-Car Sound Driver
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 
-definitions:
-  port-def:
-    $ref: audio-graph-port.yaml#/definitions/port-base
-    unevaluatedProperties: false
-    patternProperties:
-      "^endpoint(@[0-9a-f]+)?":
-        $ref: audio-graph-port.yaml#/definitions/endpoint-base
-        properties:
-          playback:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-          capture:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-        unevaluatedProperties: false
-
 properties:
 
   compatible:
@@ -125,7 +111,17 @@ properties:
 
   # ports is below
   port:
-    $ref: "#/definitions/port-def"
+    $ref: audio-graph-port.yaml#/definitions/port-base
+    unevaluatedProperties: false
+    patternProperties:
+      "^endpoint(@[0-9a-f]+)?":
+        $ref: audio-graph-port.yaml#/definitions/endpoint-base
+        properties:
+          playback:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+          capture:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+        unevaluatedProperties: false
 
   rcar_sound,dvc:
     description: DVC subnode.
@@ -269,7 +265,7 @@ patternProperties:
     unevaluatedProperties: false
     patternProperties:
       '^port(@[0-9a-f]+)?$':
-        $ref: "#/definitions/port-def"
+        $ref: "#/properties/port"
 
 required:
   - compatible
@@ -501,19 +497,19 @@ examples:
         rcar_sound,dai {
             dai0 {
                 playback = <&ssi5>, <&src5>;
-                capture  = <&ssi6>;
+                capture = <&ssi6>;
             };
             dai1 {
                 playback = <&ssi3>;
             };
             dai2 {
-                capture  = <&ssi4>;
+                capture = <&ssi4>;
             };
             dai3 {
                 playback = <&ssi7>;
             };
             dai4 {
-                capture  = <&ssi8>;
+                capture = <&ssi8>;
             };
         };
 
@@ -527,7 +523,7 @@ examples:
                 frame-master = <&rsnd_endpoint0>;
 
                 playback = <&ssi0>, <&src0>, <&dvc0>;
-                capture  = <&ssi1>, <&src1>, <&dvc1>;
+                capture = <&ssi1>, <&src1>, <&dvc1>;
             };
         };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
index 3b5ae45eee4a..8b9695f5decc 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
@@ -16,7 +16,7 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,r9a07g043-ssi  # RZ/G2UL
+          - renesas,r9a07g043-ssi  # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-ssi  # RZ/G2{L,LC}
           - renesas,r9a07g054-ssi  # RZ/V2L
       - const: renesas,rz-ssi
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/samsung-i2s.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
index 30b3b6e9824b..f45f73b5056d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
@@ -44,13 +44,18 @@ properties:
       frequencies supported by Exynos7 I2S and 7.1 channel TDM support
       for playback and capture TDM (Time division multiplexing) to allow
       transfer of multiple channel audio data on single data line.
-    enum:
-      - samsung,s3c6410-i2s
-      - samsung,s5pv210-i2s
-      - samsung,exynos5420-i2s
-      - samsung,exynos7-i2s
-      - samsung,exynos7-i2s1
-      - tesla,fsd-i2s
+    oneOf:
+      - enum:
+          - samsung,s3c6410-i2s
+          - samsung,s5pv210-i2s
+          - samsung,exynos5420-i2s
+          - samsung,exynos7-i2s
+          - samsung,exynos7-i2s1
+          - tesla,fsd-i2s
+      - items:
+          - enum:
+              - samsung,exynos5433-i2s
+          - const: samsung,exynos7-i2s
 
   '#address-cells':
     const: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/sound-card-common.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/sound-card-common.yaml
index 3a941177f684..721950f65748 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/sound-card-common.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/sound-card-common.yaml
@@ -17,6 +17,13 @@ properties:
       pair of strings, the first being the connection's sink, the second
       being the connection's source.
 
+  ignore-suspend-widgets:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of audio sound widgets which are marked ignoring system suspend.
+      Paths between these endpoints are still active over suspend of the main
+      application processor that the current operating system is running.
+
   model:
     $ref: /schemas/types.yaml#/definitions/string
     description: User specified audio sound card name
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
index f01c0dde0cf7..d28c102c0ce7 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -18,7 +18,6 @@ description: |
 
   Specifications about the audio amplifier can be found at:
     https://www.ti.com/lit/gpn/tas2562
-    https://www.ti.com/lit/gpn/tas2563
     https://www.ti.com/lit/gpn/tas2564
     https://www.ti.com/lit/gpn/tas2110
 
@@ -29,7 +28,6 @@ properties:
   compatible:
     enum:
       - ti,tas2562
-      - ti,tas2563
       - ti,tas2564
       - ti,tas2110
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/ti,tas2781.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
index a69e6c223308..976238689249 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
@@ -5,36 +5,46 @@
 $id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments TAS2781 SmartAMP
+title: Texas Instruments TAS2563/TAS2781 SmartAMP
 
 maintainers:
   - Shenghao Ding <shenghao-ding@ti.com>
 
-description:
-  The TAS2781 is a mono, digital input Class-D audio amplifier
-  optimized for efficiently driving high peak power into small
-  loudspeakers. An integrated on-chip DSP supports Texas Instruments
-  Smart Amp speaker protection algorithm. The integrated speaker
-  voltage and current sense provides for real time
+description: |
+  The TAS2563/TAS2781 is a mono, digital input Class-D audio
+  amplifier optimized for efficiently driving high peak power into
+  small loudspeakers. An integrated on-chip DSP supports Texas
+  Instruments Smart Amp speaker protection algorithm. The
+  integrated speaker voltage and current sense provides for real time
   monitoring of loudspeaker behavior.
 
-allOf:
-  - $ref: dai-common.yaml#
+  Specifications about the audio amplifier can be found at:
+    https://www.ti.com/lit/gpn/tas2563
+    https://www.ti.com/lit/gpn/tas2781
 
 properties:
   compatible:
-    enum:
-      - ti,tas2781
+    description: |
+      ti,tas2563: 6.1-W Boosted Class-D Audio Amplifier With Integrated
+      DSP and IV Sense, 16/20/24/32bit stereo I2S or multichannel TDM.
+
+      ti,tas2781: 24-V Class-D Amplifier with Real Time Integrated Speaker
+      Protection and Audio Processing, 16/20/24/32bit stereo I2S or
+      multichannel TDM.
+    oneOf:
+      - items:
+          - enum:
+              - ti,tas2563
+          - const: ti,tas2781
+      - enum:
+          - ti,tas2781
 
   reg:
     description:
-      I2C address, in multiple tas2781s case, all the i2c address
+      I2C address, in multiple-AMP case, all the i2c address
       aggregate as one Audio Device to support multiple audio slots.
     maxItems: 8
     minItems: 1
-    items:
-      minimum: 0x38
-      maximum: 0x3f
 
   reset-gpios:
     maxItems: 1
@@ -49,6 +59,44 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tas2563
+    then:
+      properties:
+        reg:
+          description:
+            I2C address, in multiple-AMP case, all the i2c address
+            aggregate as one Audio Device to support multiple audio slots.
+          maxItems: 4
+          minItems: 1
+          items:
+            minimum: 0x4c
+            maximum: 0x4f
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tas2781
+    then:
+      properties:
+        reg:
+          description:
+            I2C address, in multiple-AMP case, all the i2c address
+            aggregate as one Audio Device to support multiple audio slots.
+          maxItems: 8
+          minItems: 1
+          items:
+            minimum: 0x38
+            maximum: 0x3f
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
index a7cc9aa34468..4783e6dbb5c4 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
@@ -90,7 +90,7 @@ examples:
         ldoin-supply = <&reg_3v3>;
         clocks = <&clks 201>;
         clock-names = "mclk";
-        aic32x4-gpio-func= <
+        aic32x4-gpio-func = <
           0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
           0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
           0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.txt
deleted file mode 100644
index 8a18d71e6879..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Analog Devices AXI SPI Engine controller Device Tree Bindings
-
-Required properties:
-- compatible		: Must be "adi,axi-spi-engine-1.00.a""
-- reg			: Physical base address and size of the register map.
-- interrupts		: Property with a value describing the interrupt
-			  number.
-- clock-names		: List of input clock names - "s_axi_aclk", "spi_clk"
-- clocks		: Clock phandles and specifiers (See clock bindings for
-			  details on clock-names and clocks).
-- #address-cells	: Must be <1>
-- #size-cells		: Must be <0>
-
-Optional subnodes:
-	Subnodes are use to represent the SPI slave devices connected to the SPI
-	master. They follow the generic SPI bindings as outlined in spi-bus.txt.
-
-Example:
-
-    spi@@44a00000 {
-		compatible = "adi,axi-spi-engine-1.00.a";
-		reg = <0x44a00000 0x1000>;
-		interrupts = <0 56 4>;
-		clocks = <&clkc 15 &clkc 15>;
-		clock-names = "s_axi_aclk", "spi_clk";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* SPI devices */
-    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.yaml
new file mode 100644
index 000000000000..d48faa42d025
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/adi,axi-spi-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI SPI Engine Controller
+
+description: |
+  The AXI SPI Engine controller is part of the SPI Engine framework[1] and
+  allows memory mapped access to the SPI Engine control bus. This allows it
+  to be used as a general purpose software driven SPI controller as well as
+  some optional advanced acceleration and offloading capabilities.
+
+  [1] https://wiki.analog.com/resources/fpga/peripherals/spi_engine
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: adi,axi-spi-engine-1.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The AXI interconnect clock.
+      - description: The SPI controller clock.
+
+  clock-names:
+    items:
+      - const: s_axi_aclk
+      - const: spi_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@44a00000 {
+        compatible = "adi,axi-spi-engine-1.00.a";
+        reg = <0x44a00000 0x1000>;
+        interrupts = <0 56 4>;
+        clocks = <&clkc 15>, <&clkc 15>;
+        clock-names = "s_axi_aclk", "spi_clk";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* SPI devices */
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/spi/renesas,rspi.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
index 4d8ec69214c9..0ef3f8421986 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
@@ -21,7 +21,7 @@ properties:
           - enum:
               - renesas,rspi-r7s72100  # RZ/A1H
               - renesas,rspi-r7s9210   # RZ/A2
-              - renesas,r9a07g043-rspi # RZ/G2UL
+              - renesas,r9a07g043-rspi # RZ/G2UL and RZ/Five
               - renesas,r9a07g044-rspi # RZ/G2{L,LC}
               - renesas,r9a07g054-rspi # RZ/V2L
           - const: renesas,rspi-rz
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
index 6348a387a21c..fde3776a558b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
@@ -72,8 +72,6 @@ properties:
           - const: snps,dw-apb-ssi
       - description: Intel Keem Bay SPI Controller
         const: intel,keembay-ssi
-      - description: Intel Thunder Bay SPI Controller
-        const: intel,thunderbay-ssi
       - description: Intel Mount Evans Integrated Management Complex SPI Controller
         const: intel,mountevans-imc-ssi
       - description: AMD Pensando Elba SoC SPI Controller
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
index ae0f082bd377..4bd9aeb81208 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -23,7 +23,9 @@ properties:
   compatible:
     enum:
       - st,stm32f4-spi
+      - st,stm32f7-spi
       - st,stm32h7-spi
+      - st,stm32mp25-spi
 
   reg:
     maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index fbd4212285e2..9b2272a9ec15 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -16,6 +16,7 @@ properties:
       - allwinner,sun8i-a83t-ths
       - allwinner,sun8i-h3-ths
       - allwinner,sun8i-r40-ths
+      - allwinner,sun20i-d1-ths
       - allwinner,sun50i-a64-ths
       - allwinner,sun50i-a100-ths
       - allwinner,sun50i-h5-ths
@@ -61,6 +62,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h6-ths
 
@@ -84,7 +86,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: allwinner,sun8i-h3-ths
+            enum:
+              - allwinner,sun8i-h3-ths
+              - allwinner,sun20i-d1-ths
 
     then:
       properties:
@@ -103,6 +107,7 @@ allOf:
             enum:
               - allwinner,sun8i-h3-ths
               - allwinner,sun8i-r40-ths
+              - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a64-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h5-ths
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
index 7538469997f9..b634f57cd011 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
@@ -10,6 +10,9 @@ maintainers:
   - zhanghongchen <zhanghongchen@loongson.cn>
   - Yinbo Zhu <zhuyinbo@loongson.cn>
 
+allOf:
+  - $ref: /schemas/thermal/thermal-sensor.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -26,12 +29,16 @@ properties:
   interrupts:
     maxItems: 1
 
+  '#thermal-sensor-cells':
+    const: 1
+
 required:
   - compatible
   - reg
   - interrupts
+  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -41,4 +48,5 @@ examples:
         reg = <0x1fe01500 0x30>;
         interrupt-parent = <&liointc0>;
         interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+        #thermal-sensor-cells = <1>;
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml
new file mode 100644
index 000000000000..d96a2e32bd8f
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek thermal controller for on-SoC temperatures
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description:
+  This device does not have its own ADC, instead it directly controls the AUXADC
+  via AHB bus accesses. For this reason it needs phandles to the AUXADC. Also it
+  controls a mux in the apmixedsys register space via AHB bus accesses, so a
+  phandle to the APMIXEDSYS is also needed.
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-thermal
+      - mediatek,mt2712-thermal
+      - mediatek,mt7622-thermal
+      - mediatek,mt7981-thermal
+      - mediatek,mt7986-thermal
+      - mediatek,mt8173-thermal
+      - mediatek,mt8183-thermal
+      - mediatek,mt8365-thermal
+      - mediatek,mt8516-thermal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock needed for register access
+      - description: The AUXADC clock
+
+  clock-names:
+    items:
+      - const: therm
+      - const: auxadc
+
+  mediatek,auxadc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the AUXADC which the thermal controller uses
+
+  mediatek,apmixedsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the APMIXEDSYS controller
+
+  resets:
+    description: Reset controller controlling the thermal controller
+
+  nvmem-cells:
+    items:
+      - description:
+          NVMEM cell with EEPROMA phandle to the calibration data provided by an
+          NVMEM device. If unspecified default values shall be used.
+
+  nvmem-cell-names:
+    items:
+      - const: calibration-data
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - mediatek,auxadc
+  - mediatek,apmixedsys
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/reset/mt8173-resets.h>
+
+    thermal@1100b000 {
+        compatible = "mediatek,mt8173-thermal";
+        reg = <0x1100b000 0x1000>;
+        interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+        clock-names = "therm", "auxadc";
+        resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+        mediatek,auxadc = <&auxadc>;
+        mediatek,apmixedsys = <&apmixedsys>;
+        nvmem-cells = <&thermal_calibration_data>;
+        nvmem-cell-names = "calibration-data";
+        #thermal-sensor-cells = <1>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
deleted file mode 100644
index ac39c7156fde..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Mediatek Thermal
-
-This describes the device tree binding for the Mediatek thermal controller
-which measures the on-SoC temperatures. This device does not have its own ADC,
-instead it directly controls the AUXADC via AHB bus accesses. For this reason
-this device needs phandles to the AUXADC. Also it controls a mux in the
-apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS
-is also needed.
-
-Required properties:
-- compatible:
-  - "mediatek,mt8173-thermal" : For MT8173 family of SoCs
-  - "mediatek,mt2701-thermal" : For MT2701 family of SoCs
-  - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
-  - "mediatek,mt7622-thermal" : For MT7622 SoC
-  - "mediatek,mt7981-thermal", "mediatek,mt7986-thermal" : For MT7981 SoC
-  - "mediatek,mt7986-thermal" : For MT7986 SoC
-  - "mediatek,mt8183-thermal" : For MT8183 family of SoCs
-  - "mediatek,mt8365-thermal" : For MT8365 family of SoCs
-  - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs
-- reg: Address range of the thermal controller
-- interrupts: IRQ for the thermal controller
-- clocks, clock-names: Clocks needed for the thermal controller. required
-                       clocks are:
-		       "therm":	 Main clock needed for register access
-		       "auxadc": The AUXADC clock
-- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
-- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
-- #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
-
-Optional properties:
-- resets: Reference to the reset controller controlling the thermal controller.
-- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
-               unspecified default values shall be used.
-- nvmem-cell-names: Should be "calibration-data"
-
-Example:
-
-	thermal: thermal@1100b000 {
-		#thermal-sensor-cells = <1>;
-		compatible = "mediatek,mt8173-thermal";
-		reg = <0 0x1100b000 0 0x1000>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
-		clock-names = "therm", "auxadc";
-		resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
-		reset-names = "therm";
-		mediatek,auxadc = <&auxadc>;
-		mediatek,apmixedsys = <&apmixedsys>;
-		nvmem-cells = <&thermal_calibration_data>;
-		nvmem-cell-names = "calibration-data";
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
index 01253d58bf9f..7541e27704ca 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
@@ -114,12 +114,14 @@ examples:
   - |
     #include <dt-bindings/iio/qcom,spmi-vadc.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi_bus {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
+
         pm8998_adc: adc@3100 {
-            reg = <0x3100>;
             compatible = "qcom,spmi-adc-rev2";
+            reg = <0x3100>;
             #address-cells = <1>;
             #size-cells = <0>;
             #io-channel-cells = <1>;
@@ -130,7 +132,7 @@ examples:
             };
         };
 
-        pm8998_adc_tm: adc-tm@3400 {
+        adc-tm@3400 {
             compatible = "qcom,spmi-adc-tm-hc";
             reg = <0x3400>;
             interrupts = <0x2 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
index 3c81def03c84..d9d2657287cb 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -167,12 +167,14 @@ examples:
   - |
     #include <dt-bindings/iio/qcom,spmi-vadc.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi_bus {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
+
         pm8150b_adc: adc@3100 {
-            reg = <0x3100>;
             compatible = "qcom,spmi-adc5";
+            reg = <0x3100>;
             #address-cells = <1>;
             #size-cells = <0>;
             #io-channel-cells = <1>;
@@ -186,7 +188,7 @@ examples:
             };
         };
 
-        pm8150b_adc_tm: adc-tm@3500 {
+        adc-tm@3500 {
             compatible = "qcom,spmi-adc-tm5";
             reg = <0x3500>;
             interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
@@ -207,12 +209,14 @@ examples:
     #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
     #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi_bus {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
+
         pmk8350_vadc: adc@3100 {
-            reg = <0x3100>;
             compatible = "qcom,spmi-adc7";
+            reg = <0x3100>;
             #address-cells = <1>;
             #size-cells = <0>;
             #io-channel-cells = <1>;
@@ -233,7 +237,7 @@ examples:
             };
         };
 
-        pmk8350_adc_tm: adc-tm@3400 {
+        adc-tm@3400 {
             compatible = "qcom,spmi-adc-tm5-gen2";
             reg = <0x3400>;
             interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 437b74732886..99d9c526c0b6 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -66,6 +66,7 @@ properties:
               - qcom,sm8350-tsens
               - qcom,sm8450-tsens
               - qcom,sm8550-tsens
+              - qcom,sm8650-tsens
           - const: qcom,tsens-v2
 
       - description: v2 of TSENS with combined interrupt
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index 4a8dabc48170..dbd52620d293 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -75,6 +75,22 @@ patternProperties:
           framework and assumes that the thermal sensors in this zone
           support interrupts.
 
+      critical-action:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: |
+          The action the OS should perform after the critical temperature is reached.
+          By default the system will shutdown as a safe action to prevent damage
+          to the hardware, if the property is not set.
+          The shutdown action should be always the default and preferred one.
+          Choose 'reboot' with care, as the hardware may be in thermal stress,
+          thus leading to infinite reboots that may cause damage to the hardware.
+          Make sure the firmware/bootloader will act as the last resort and take
+          over the thermal control.
+
+        enum:
+          - shutdown
+          - reboot
+
       thermal-sensors:
         $ref: /schemas/types.yaml#/definitions/phandle-array
         maxItems: 1
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/timer/sifive,clint.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/sifive,clint.yaml
index e8be6c470364..fced6f2d8ecb 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/timer/sifive,clint.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -33,11 +33,13 @@ properties:
               - sifive,fu540-c000-clint # SiFive FU540
               - starfive,jh7100-clint   # StarFive JH7100
               - starfive,jh7110-clint   # StarFive JH7110
+              - starfive,jh8100-clint   # StarFive JH8100
           - const: sifive,clint0        # SiFive CLINT v0 IP block
       - items:
           - enum:
               - allwinner,sun20i-d1-clint
               - sophgo,cv1800b-clint
+              - sophgo,cv1812h-clint
               - thead,th1520-clint
           - const: thead,c900-clint
       - items:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
index fbd235650e52..2e92bcdeb423 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
@@ -17,7 +17,12 @@ properties:
       - const: thead,c900-aclint-mtimer
 
   reg:
-    maxItems: 1
+    items:
+      - description: MTIMECMP Registers
+
+  reg-names:
+    items:
+      - const: mtimecmp
 
   interrupts-extended:
     minItems: 1
@@ -28,6 +33,7 @@ additionalProperties: false
 required:
   - compatible
   - reg
+  - reg-names
   - interrupts-extended
 
 examples:
@@ -39,5 +45,6 @@ examples:
                             <&cpu3intc 7>,
                             <&cpu4intc 7>;
       reg = <0xac000000 0x00010000>;
+      reg-names = "mtimecmp";
     };
 ...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/tpm/google,cr50.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/google,cr50.yaml
new file mode 100644
index 000000000000..9302e12e9fc7
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/google,cr50.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/google,cr50.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Security Chip H1 (running Cr50 firmware)
+
+maintainers:
+  - Andrey Pronin <apronin@chromium.org>
+
+description: |
+  Google has designed a family of security chips called "Titan".
+  One member is the H1 built into Chromebooks and running Cr50 firmware:
+  https://www.osfc.io/2018/talks/google-secure-microcontroller-and-ccd-closed-case-debugging/
+
+  The chip provides several functions, including TPM 2.0 like functionality.
+  It communicates over SPI or I²C using the FIFO protocol described in the
+  TCG PC Client Platform TPM Profile Specification for TPM 2.0 (PTP), sec 6:
+  https://trustedcomputinggroup.org/resource/pc-client-platform-tpm-profile-ptp-specification/
+
+properties:
+  compatible:
+    const: google,cr50
+
+allOf:
+  - $ref: tpm-common.yaml#
+
+anyOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: tcg,tpm-tis-i2c.yaml#/properties/reg
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@0 {
+            reg = <0>;
+            compatible = "google,cr50";
+            spi-max-frequency = <800000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@50 {
+            compatible = "google,cr50";
+            reg = <0x50>;
+            interrupts-extended = <&pio 88 IRQ_TYPE_EDGE_FALLING>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cr50_int>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml
new file mode 100644
index 000000000000..50a3fd31241c
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/ibm,vtpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM Virtual Trusted Platform Module (vTPM)
+
+maintainers:
+  - Nayna Jain <nayna@linux.ibm.com>
+
+description: |
+  Virtual TPM is used on IBM POWER7+ and POWER8 systems running POWERVM.
+  It is supported through the adjunct partition with firmware release 740
+  or higher.  With vTPM support, each lpar is able to have its own vTPM
+  without the physical TPM hardware.  The TPM functionality is provided by
+  communicating with the vTPM adjunct partition through Hypervisor calls
+  (Hcalls) and Command/Response Queue (CRQ) commands.
+
+properties:
+  compatible:
+    enum:
+      - IBM,vtpm
+      - IBM,vtpm20
+
+  device_type:
+    description:
+      type of virtual device
+    enum:
+      - IBM,vtpm
+      - IBM,vtpm20
+
+  reg:
+    maxItems: 1
+
+  'ibm,#dma-address-cells':
+    description:
+      number of cells that are used to encode the physical address field of
+      dma-window properties
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  'ibm,#dma-size-cells':
+    description:
+      number of cells that are used to encode the size field of
+      dma-window properties
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  ibm,my-dma-window:
+    description:
+      DMA window associated with this virtual I/O Adapter
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 5
+    maxItems: 5
+
+  ibm,my-drc-index:
+    description:
+      integer index for the connector between the device and its parent;
+      present only if Dynamic Reconfiguration (DR) Connector is enabled
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ibm,loc-code:
+    description:
+      unique and persistent location code associated with this virtual
+      I/O Adapter
+    $ref: /schemas/types.yaml#/definitions/string
+
+required:
+  - compatible
+  - device_type
+  - reg
+  - interrupts
+  - ibm,#dma-address-cells
+  - ibm,#dma-size-cells
+  - ibm,my-dma-window
+  - ibm,my-drc-index
+  - ibm,loc-code
+  - linux,sml-base
+  - linux,sml-size
+
+allOf:
+  - $ref: tpm-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@30000003 {
+            compatible = "IBM,vtpm";
+            device_type = "IBM,vtpm";
+            reg = <0x30000003>;
+            interrupts = <0xa0003 0x0>;
+            ibm,#dma-address-cells = <0x2>;
+            ibm,#dma-size-cells = <0x2>;
+            ibm,my-dma-window = <0x10000003 0x0 0x0 0x0 0x10000000>;
+            ibm,my-drc-index = <0x30000003>;
+            ibm,loc-code = "U8286.41A.10082DV-V3-C3";
+            linux,sml-base = <0xc60e 0x0>;
+            linux,sml-size = <0xbce10200>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/tpm/microsoft,ftpm.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/microsoft,ftpm.yaml
new file mode 100644
index 000000000000..fdb81968f03d
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/microsoft,ftpm.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/microsoft,ftpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsoft firmware-based Trusted Platform Module (fTPM)
+
+maintainers:
+  - Thirupathaiah Annapureddy <thiruan@microsoft.com>
+  - Sasha Levin <sashal@kernel.org>
+
+description: |
+  Commodity CPU architectures, such as ARM and Intel CPUs, have started to
+  offer trusted computing features in their CPUs aimed at displacing dedicated
+  trusted hardware.  Unfortunately, these CPU architectures raise serious
+  challenges to building trusted systems because they omit providing secure
+  resources outside the CPU perimeter.
+
+  Microsoft's firmware-based TPM 2.0 (fTPM) leverages ARM TrustZone to overcome
+  these challenges and provide software with security guarantees similar to
+  those of dedicated trusted hardware.
+
+  https://www.microsoft.com/en-us/research/publication/ftpm-software-implementation-tpm-chip/
+  https://github.com/Microsoft/ms-tpm-20-ref/tree/main/Samples/ARM32-FirmwareTPM
+
+properties:
+  compatible:
+    const: microsoft,ftpm
+
+required:
+  - compatible
+  - linux,sml-base
+  - linux,sml-size
+
+allOf:
+  - $ref: tpm-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    tpm {
+        compatible = "microsoft,ftpm";
+        linux,sml-base = <0x0 0xc0000000>;
+        linux,sml-size = <0x10000>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml
new file mode 100644
index 000000000000..3ab4434b7352
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I²C-attached Trusted Platform Module conforming to TCG TIS specification
+
+maintainers:
+  - Lukas Wunner <lukas@wunner.de>
+
+description: |
+  The Trusted Computing Group (TCG) has defined a multi-vendor standard
+  for accessing a TPM chip.  It can be transported over various buses,
+  one of them being I²C.  The standard is named:
+  TCG PC Client Specific TPM Interface Specification (TIS)
+  https://trustedcomputinggroup.org/resource/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/
+
+  The I²C interface was not originally part of the standard, but added
+  in 2017 with a separate document:
+  TCG PC Client Platform TPM Profile Specification for TPM 2.0 (PTP)
+  https://trustedcomputinggroup.org/resource/pc-client-platform-tpm-profile-ptp-specification/
+
+  Recent TPM 2.0 chips conform to this generic interface, others use a
+  vendor-specific I²C interface.
+
+properties:
+  compatible:
+    oneOf:
+      - description: Generic TPM 2.0 chips conforming to TCG PTP interface
+        items:
+          - enum:
+              - infineon,slb9673
+              - nuvoton,npct75x
+          - const: tcg,tpm-tis-i2c
+
+      - description: TPM 1.2 and 2.0 chips with vendor-specific I²C interface
+        items:
+          - enum:
+              - atmel,at97sc3204t # TPM 1.2
+              - infineon,slb9635tt # TPM 1.2 (maximum 100 kHz)
+              - infineon,slb9645tt # TPM 1.2 (maximum 400 kHz)
+              - infineon,tpm_i2c_infineon # TPM 1.2
+              - nuvoton,npct501 # TPM 1.2
+              - nuvoton,npct601 # TPM 2.0
+              - st,st33zp24-i2c # TPM 2.0
+              - winbond,wpct301 # TPM 1.2
+
+  reg:
+    description: address of TPM on the I²C bus
+
+allOf:
+  - $ref: tpm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@57 {
+            label = "tpm";
+            compatible = "nuvoton,npct601";
+            reg = <0x57>;
+            linux,sml-base = <0x7f 0xfd450000>;
+            linux,sml-size = <0x10000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@13 {
+            reg = <0x13>;
+            compatible = "st,st33zp24-i2c";
+            interrupt-parent = <&gpio5>;
+            interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+            lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-mmio.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-mmio.yaml
new file mode 100644
index 000000000000..87bce0692129
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-mmio.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMIO-accessed Trusted Platform Module conforming to TCG TIS specification
+
+maintainers:
+  - Lukas Wunner <lukas@wunner.de>
+
+description: |
+  The Trusted Computing Group (TCG) has defined a multi-vendor standard
+  for accessing a TPM chip.  It can be transported over various buses,
+  one of them being LPC (via MMIO).  The standard is named:
+  TCG PC Client Specific TPM Interface Specification (TIS)
+  https://trustedcomputinggroup.org/resource/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - at97sc3201
+          - atmel,at97sc3204
+          - socionext,synquacer-tpm-mmio
+      - const: tcg,tpm-tis-mmio
+
+  reg:
+    description:
+      location and length of the MMIO registers, length should be
+      at least 0x5000 bytes
+
+allOf:
+  - $ref: tpm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    tpm@90000 {
+        compatible = "atmel,at97sc3204", "tcg,tpm-tis-mmio";
+        reg = <0x90000 0x5000>;
+        interrupt-parent = <&EIC0>;
+        interrupts = <1 2>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml
new file mode 100644
index 000000000000..c3413b47ac3d
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-attached Trusted Platform Module conforming to TCG TIS specification
+
+maintainers:
+  - Lukas Wunner <lukas@wunner.de>
+
+description: |
+  The Trusted Computing Group (TCG) has defined a multi-vendor standard
+  for accessing a TPM chip.  It can be transported over various buses,
+  one of them being SPI.  The standard is named:
+  TCG PC Client Specific TPM Interface Specification (TIS)
+  https://trustedcomputinggroup.org/resource/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - infineon,slb9670
+          - st,st33htpm-spi
+          - st,st33zp24-spi
+      - const: tcg,tpm_tis-spi
+
+allOf:
+  - $ref: tpm-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,st33zp24-spi
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 10000000
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@0 {
+            reg = <0>;
+            compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+            spi-max-frequency = <10000000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@0 {
+            reg = <0>;
+            compatible = "st,st33zp24-spi", "tcg,tpm_tis-spi";
+            spi-max-frequency = <10000000>;
+            interrupt-parent = <&gpio5>;
+            interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+            lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/tpm/tpm-common.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/tpm-common.yaml
new file mode 100644
index 000000000000..3c1241b2a43f
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/tpm-common.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/tpm-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trusted Platform Module common properties
+
+maintainers:
+  - Lukas Wunner <lukas@wunner.de>
+
+properties:
+  $nodename:
+    pattern: '^tpm(@[0-9a-f]+)?$'
+
+  interrupts:
+    description: indicates command completion
+    maxItems: 1
+
+  label:
+    description: human readable string describing the device, e.g. "tpm"
+
+  linux,sml-base:
+    description:
+      base address of reserved memory allocated for firmware event log
+    $ref: /schemas/types.yaml#/definitions/uint64
+
+  linux,sml-size:
+    description:
+      size of reserved memory allocated for firmware event log
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  memory-region:
+    description: reserved memory allocated for firmware event log
+    maxItems: 1
+
+  powered-while-suspended:
+    description:
+      present when the TPM is left powered on between suspend and resume
+      (makes the suspend/resume callbacks do nothing)
+    type: boolean
+
+  resets:
+    description: Reset controller to reset the TPM
+    maxItems: 1
+
+  reset-gpios:
+    description: Output GPIO pin to reset the TPM
+    maxItems: 1
+
+# must always have both linux,sml-base and linux,sml-size
+dependentRequired:
+  linux,sml-base: ['linux,sml-size']
+  linux,sml-size: ['linux,sml-base']
+
+# must only have either memory-region or linux,sml-base
+# as well as either resets or reset-gpios
+dependentSchemas:
+  memory-region:
+    properties:
+      linux,sml-base: false
+  linux,sml-base:
+    properties:
+      memory-region: false
+  resets:
+    properties:
+      reset-gpios: false
+  reset-gpios:
+    properties:
+      resets: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: '^st,st33zp24'
+    then:
+      properties:
+        lpcpd-gpios:
+          description:
+            Output GPIO pin used for ST33ZP24 power management of D1/D2 state.
+            If set, power must be present when the platform is going into
+            sleep/hibernate mode.
+          maxItems: 1
+
+additionalProperties: true
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/trivial-devices.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/trivial-devices.yaml
index c3190f2a168a..79dcd92c4a43 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/trivial-devices.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -49,8 +49,6 @@ properties:
           - ams,iaq-core
             # i2c serial eeprom (24cxx)
           - at,24c08
-            # i2c trusted platform module (TPM)
-          - atmel,at97sc3204t
             # ATSHA204 - i2c h/w symmetric crypto module
           - atmel,atsha204
             # ATSHA204A - i2c h/w symmetric crypto module
@@ -117,6 +115,10 @@ properties:
           - fsl,mpl3115
             # MPR121: Proximity Capacitive Touch Sensor Controller
           - fsl,mpr121
+            # Monolithic Power Systems Inc. multi-phase controller mp2856
+          - mps,mp2856
+            # Monolithic Power Systems Inc. multi-phase controller mp2857
+          - mps,mp2857
             # Monolithic Power Systems Inc. multi-phase controller mp2888
           - mps,mp2888
             # Monolithic Power Systems Inc. multi-phase controller mp2971
@@ -125,6 +127,8 @@ properties:
           - mps,mp2973
             # Monolithic Power Systems Inc. multi-phase controller mp2975
           - mps,mp2975
+            # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
+          - mps,mp5990
             # Honeywell Humidicon HIH-6130 humidity/temperature sensor
           - honeywell,hi6130
             # IBM Common Form Factor Power Supply Versions (all versions)
@@ -145,12 +149,6 @@ properties:
           - infineon,ir38263
             # Infineon IRPS5401 Voltage Regulator (PMIC)
           - infineon,irps5401
-            # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
-          - infineon,slb9635tt
-            # Infineon SLB9645 I2C TPM (new protocol, max 400khz)
-          - infineon,slb9645tt
-            # Infineon SLB9673 I2C TPM 2.0
-          - infineon,slb9673
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
           - infineon,tlv493d-a1b6
             # Infineon Multi-phase Digital VR Controller xdpe11280
@@ -179,6 +177,8 @@ properties:
           - isil,isl29030
             # Intersil ISL68137 Digital Output Configurable PWM Controller
           - isil,isl68137
+            # Intersil ISL76682 Ambient Light Sensor
+          - isil,isl76682
             # Linear Technology LTC2488
           - lineartechnology,ltc2488
             # 5 Bit Programmable, Pulse-Width Modulator
@@ -301,10 +301,6 @@ properties:
           - national,lm85
             # I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator
           - national,lm92
-            # i2c trusted platform module (TPM)
-          - nuvoton,npct501
-            # i2c trusted platform module (TPM2)
-          - nuvoton,npct601
             # Nuvoton Temperature Sensor
           - nuvoton,w83773g
             # OKI ML86V7667 video decoder
@@ -349,8 +345,6 @@ properties:
           - silabs,si7020
             # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
           - skyworks,sky81452
-            # Socionext SynQuacer TPM MMIO module
-          - socionext,synquacer-tpm-mmio
             # SparkFun Qwiic Joystick (COM-15168) with i2c interface
           - sparkfun,qwiic-joystick
             # i2c serial eeprom (24cxx)
@@ -405,8 +399,6 @@ properties:
           - winbond,w83793
             # Vicor Corporation Digital Supervisor
           - vicor,pli1209bc
-            # i2c trusted platform module (TPM)
-          - winbond,wpct301
 
 required:
   - compatible
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index 2cf3d016db42..10c146424baa 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -27,6 +27,7 @@ properties:
           - qcom,msm8996-ufshc
           - qcom,msm8998-ufshc
           - qcom,sa8775p-ufshc
+          - qcom,sc7280-ufshc
           - qcom,sc8280xp-ufshc
           - qcom,sdm845-ufshc
           - qcom,sm6115-ufshc
@@ -118,6 +119,7 @@ allOf:
             enum:
               - qcom,msm8998-ufshc
               - qcom,sa8775p-ufshc
+              - qcom,sc7280-ufshc
               - qcom,sc8280xp-ufshc
               - qcom,sm8250-ufshc
               - qcom,sm8350-ufshc
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
index 88cc1e3a0c88..b2b509b3944d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
@@ -55,9 +55,12 @@ properties:
 
   samsung,sysreg:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: Should be phandle/offset pair. The phandle to the syscon node
-                 which indicates the FSYSx sysreg interface and the offset of
-                 the control register for UFS io coherency setting.
+    items:
+      - items:
+          - description: phandle to FSYSx sysreg node
+          - description: offset of the control register for UFS io coherency setting
+    description:
+      Phandle and offset to the FSYSx sysreg for UFS io coherency setting.
 
   dma-coherent: true
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/ufs/ufs-common.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/ufs/ufs-common.yaml
index 985ea8f64de8..31fe7f30ff5b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/ufs/ufs-common.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/ufs/ufs-common.yaml
@@ -87,6 +87,8 @@ properties:
     description:
       Specifies max. load that can be drawn from VCCQ2 supply.
 
+  msi-parent: true
+
 dependencies:
   freq-table-hz: [ clocks ]
   operating-points-v2: [ clocks, clock-names ]
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
index bb373eb025a5..00f87a558c7d 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx SuperSpeed DWC3 USB SoC controller
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@amd.com>
+  - Mubin Sayyed <mubin.sayyed@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 properties:
   compatible:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/generic-xhci.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/generic-xhci.yaml
index 594ebb3ee432..6ceafa4af292 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/generic-xhci.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/generic-xhci.yaml
@@ -9,9 +9,6 @@ title: USB xHCI Controller
 maintainers:
   - Mathias Nyman <mathias.nyman@intel.com>
 
-allOf:
-  - $ref: usb-xhci.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -25,6 +22,11 @@ properties:
               - marvell,armada-380-xhci
               - marvell,armada-8k-xhci
           - const: generic-xhci
+      - description: Broadcom SoCs with power domains
+        items:
+          - enum:
+              - brcm,bcm2711-xhci
+          - const: brcm,xhci-brcm-v2
       - description: Broadcom STB SoCs with xHCI
         enum:
           - brcm,xhci-brcm-v2
@@ -49,6 +51,9 @@ properties:
       - const: core
       - const: reg
 
+  power-domains:
+    maxItems: 1
+
 unevaluatedProperties: false
 
 required:
@@ -56,6 +61,20 @@ required:
   - reg
   - interrupts
 
+allOf:
+  - $ref: usb-xhci.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2711-xhci
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+
 examples:
   - |
     usb@f0931000 {
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
index ee08b9c3721f..37cf5249e526 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
@@ -29,6 +29,11 @@ properties:
     description:
       the regulator that provides 3.3V core power to the hub.
 
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index e9644e333d78..924fd3d748a8 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -124,6 +124,17 @@ properties:
       defined in the xHCI spec on MTK's controller.
     default: 5000
 
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      It is a quirk used to work around Gen1 isoc-in endpoint transfer issue
+      that still send out unexpected ACK after device finishes the burst
+      transfer with a short packet and cause an exception, specially on a 4K
+      camera device, it happens on controller before about IPM v1.6.0;
+      the side-effect is that it may cause performance drop about 10%,
+      including bulk transfer, prefer to use 3k here. The size is in bytes.
+    enum: [1024, 2048, 3072, 4096]
+
   # the following properties are only used for case 1
   wakeup-source:
     description: enable USB remote wakeup, see power/wakeup-source.txt
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
index 6d4cfd943f58..445183d9d6db 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
@@ -16,8 +16,9 @@ description:
   USB 2.0 traffic.
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@amd.com>
   - Michal Simek <michal.simek@amd.com>
+  - Mubin Sayyed <mubin.sayyed@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 properties:
   compatible:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
index 28eb25ecba74..eaedb4cc6b6c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP PTN5110 Typec Port Cotroller
+title: NXP PTN5110 Type-C Port Controller
 
 maintainers:
   - Li Jun <jun.li@nxp.com>
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 915c8205623b..63d150b216c5 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -46,6 +46,8 @@ properties:
           - qcom,sm8350-dwc3
           - qcom,sm8450-dwc3
           - qcom,sm8550-dwc3
+          - qcom,sm8650-dwc3
+          - qcom,x1e80100-dwc3
       - const: qcom,dwc3
 
   reg:
@@ -97,12 +99,29 @@ properties:
       - const: apps-usb
 
   interrupts:
-    minItems: 1
-    maxItems: 4
+    description: |
+      Different types of interrupts are used based on HS PHY used on target:
+        - pwr_event: Used for wakeup based on other power events.
+        - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is
+                       hs_phy_irq which is not triggered by default and its
+                       functionality is mutually exclusive to that of
+                       {dp/dm}_hs_phy_irq and qusb2_phy_irq.
+        - qusb2_phy: SoCs with QUSB2 PHY do not have separate DP/DM IRQs and
+                      expose only a single IRQ whose behavior can be modified
+                      by the QUSB2PHY_INTR_CTRL register. The required DPSE/
+                      DMSE configuration is done in QUSB2PHY_INTR_CTRL register
+                      of PHY address space.
+        - {dp/dm}_hs_phy_irq: These IRQ's directly reflect changes on the DP/
+                               DM pads of the SoC. These are used for wakeup
+                               only on SoCs with non-QUSB2 targets with
+                               exception of SDM670/SDM845/SM6350.
+        - ss_phy_irq: Used for remote wakeup in Super Speed mode of operation.
+    minItems: 2
+    maxItems: 5
 
   interrupt-names:
-    minItems: 1
-    maxItems: 4
+    minItems: 2
+    maxItems: 5
 
   qcom,select-utmi-as-pipe-clk:
     description:
@@ -263,6 +282,7 @@ allOf:
           contains:
             enum:
               - qcom,sc8280xp-dwc3
+              - qcom,x1e80100-dwc3
     then:
       properties:
         clocks:
@@ -288,8 +308,8 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 5
-          maxItems: 6
+          minItems: 4
+          maxItems: 5
         clock-names:
           oneOf:
             - items:
@@ -298,13 +318,11 @@ allOf:
                 - const: iface
                 - const: sleep
                 - const: mock_utmi
-                - const: bus
             - items:
                 - const: cfg_noc
                 - const: core
                 - const: sleep
                 - const: mock_utmi
-                - const: bus
 
   - if:
       properties:
@@ -318,6 +336,7 @@ allOf:
               - qcom,sm8250-dwc3
               - qcom,sm8450-dwc3
               - qcom,sm8550-dwc3
+              - qcom,sm8650-dwc3
     then:
       properties:
         clocks:
@@ -357,59 +376,20 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,ipq4019-dwc3
+              - qcom,ipq5018-dwc3
               - qcom,ipq6018-dwc3
-              - qcom,ipq8064-dwc3
               - qcom,ipq8074-dwc3
-              - qcom,msm8994-dwc3
-              - qcom,qcs404-dwc3
-              - qcom,sc7180-dwc3
-              - qcom,sdm670-dwc3
-              - qcom,sdm845-dwc3
-              - qcom,sdx55-dwc3
-              - qcom,sdx65-dwc3
-              - qcom,sdx75-dwc3
-              - qcom,sm4250-dwc3
-              - qcom,sm6125-dwc3
-              - qcom,sm6350-dwc3
-              - qcom,sm8150-dwc3
-              - qcom,sm8250-dwc3
-              - qcom,sm8350-dwc3
-              - qcom,sm8450-dwc3
-              - qcom,sm8550-dwc3
-    then:
-      properties:
-        interrupts:
-          items:
-            - description: The interrupt that is asserted
-                when a wakeup event is received on USB2 bus.
-            - description: The interrupt that is asserted
-                when a wakeup event is received on USB3 bus.
-            - description: Wakeup event on DM line.
-            - description: Wakeup event on DP line.
-        interrupt-names:
-          items:
-            - const: hs_phy_irq
-            - const: ss_phy_irq
-            - const: dm_hs_phy_irq
-            - const: dp_hs_phy_irq
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
               - qcom,msm8953-dwc3
-              - qcom,msm8996-dwc3
               - qcom,msm8998-dwc3
-              - qcom,sm6115-dwc3
     then:
       properties:
         interrupts:
-          maxItems: 2
+          minItems: 2
+          maxItems: 3
         interrupt-names:
           items:
-            - const: hs_phy_irq
+            - const: pwr_event
+            - const: qusb2_phy
             - const: ss_phy_irq
 
   - if:
@@ -417,37 +397,21 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,ipq5018-dwc3
-              - qcom,ipq5332-dwc3
+              - qcom,msm8996-dwc3
+              - qcom,qcs404-dwc3
               - qcom,sdm660-dwc3
-    then:
-      properties:
-        interrupts:
-          minItems: 1
-          maxItems: 2
-        interrupt-names:
-          minItems: 1
-          items:
-            - const: hs_phy_irq
-            - const: ss_phy_irq
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc7280-dwc3
+              - qcom,sm6115-dwc3
+              - qcom,sm6125-dwc3
     then:
       properties:
         interrupts:
           minItems: 3
           maxItems: 4
         interrupt-names:
-          minItems: 3
           items:
+            - const: pwr_event
+            - const: qusb2_phy
             - const: hs_phy_irq
-            - const: dp_hs_phy_irq
-            - const: dm_hs_phy_irq
             - const: ss_phy_irq
 
   - if:
@@ -455,7 +419,8 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sc8280xp-dwc3
+              - qcom,ipq5332-dwc3
+              - qcom,x1e80100-dwc3
     then:
       properties:
         interrupts:
@@ -472,16 +437,35 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq4019-dwc3
+              - qcom,ipq8064-dwc3
+              - qcom,msm8994-dwc3
               - qcom,sa8775p-dwc3
+              - qcom,sc7180-dwc3
+              - qcom,sc7280-dwc3
+              - qcom,sc8280xp-dwc3
+              - qcom,sdm670-dwc3
+              - qcom,sdm845-dwc3
+              - qcom,sdx55-dwc3
+              - qcom,sdx65-dwc3
+              - qcom,sdx75-dwc3
+              - qcom,sm4250-dwc3
+              - qcom,sm6350-dwc3
+              - qcom,sm8150-dwc3
+              - qcom,sm8250-dwc3
+              - qcom,sm8350-dwc3
+              - qcom,sm8450-dwc3
+              - qcom,sm8550-dwc3
+              - qcom,sm8650-dwc3
     then:
       properties:
         interrupts:
-          minItems: 3
-          maxItems: 4
+          minItems: 4
+          maxItems: 5
         interrupt-names:
-          minItems: 3
           items:
             - const: pwr_event
+            - const: hs_phy_irq
             - const: dp_hs_phy_irq
             - const: dm_hs_phy_irq
             - const: ss_phy_irq
@@ -519,12 +503,13 @@ examples:
                           <&gcc GCC_USB30_PRIM_MASTER_CLK>;
             assigned-clock-rates = <19200000>, <150000000>;
 
-            interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+            interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>,
                          <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
-                         <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
-            interrupt-names = "hs_phy_irq", "ss_phy_irq",
-                          "dm_hs_phy_irq", "dp_hs_phy_irq";
+                         <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "pwr_event", "hs_phy_irq",
+                          "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq";
 
             power-domains = <&gcc USB30_PRIM_GDSC>;
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml
new file mode 100644
index 000000000000..7ddfd3313a18
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/qcom,wcd939x-usbss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9380/WCD9385 USB SubSystem Altmode/Analog Audio Switch
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  Qualcomm WCD9390/WCD9395 is a standalone Hi-Fi audio codec IC with a
+  functionally separate USB SubSystem for Altmode/Analog Audio Switch
+  accessible over an I2C interface.
+  The Audio Headphone and Microphone data path between the Codec and the
+  USB-C Mux subsystems are external to the IC, thus requiring DT port-endpoint
+  graph description to handle USB-C altmode & orientation switching for Audio
+  Accessory Mode.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,wcd9390-usbss
+      - items:
+          - const: qcom,wcd9395-usbss
+          - const: qcom,wcd9390-usbss
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply:
+    description: USBSS VDD power supply
+
+  mode-switch:
+    description: Flag the port as possible handle of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          A port node to link the WCD939x USB SubSystem to a TypeC controller for the
+          purpose of handling altmode muxing and orientation switching.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          A port node to link the WCD939x USB SubSystem to the Codec SubSystem for the
+          purpose of handling USB-C Audio Accessory Mode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec-mux@42 {
+            compatible = "qcom,wcd9390-usbss";
+            reg = <0x42>;
+
+            vdd-supply = <&vreg_bob>;
+
+            mode-switch;
+            orientation-switch;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    wcd9390_usbss_sbu: endpoint {
+                        remote-endpoint = <&typec_sbu>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    wcd9390_usbss_codec: endpoint {
+                        remote-endpoint = <&wcd9390_codec_usbss>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
index bad55dfb2fa0..40ada78f2328 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
@@ -19,7 +19,7 @@ properties:
       - items:
           - enum:
               - renesas,usbhs-r7s9210   # RZ/A2
-              - renesas,usbhs-r9a07g043 # RZ/G2UL
+              - renesas,usbhs-r9a07g043 # RZ/G2UL and RZ/Five
               - renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
               - renesas,usbhs-r9a07g054 # RZ/V2L
           - const: renesas,rza2-usbhs
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index ee5af4b381b1..203a1eb66691 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -432,6 +432,10 @@ properties:
     items:
       enum: [1, 4, 8, 16, 32, 64, 128, 256]
 
+  num-hc-interrupters:
+    maximum: 8
+    default: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
index 16c433fdde71..bcb2c74db92e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
@@ -38,6 +38,10 @@ properties:
       - const: main
       - const: patch-address
 
+  reset-gpios:
+    description: GPIO used for the HRESET pin.
+    maxItems: 1
+
   wakeup-source: true
 
   interrupts:
@@ -90,6 +94,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
@@ -106,6 +111,7 @@ examples:
 
             pinctrl-names = "default";
             pinctrl-0 = <&typec_pins>;
+            reset-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 
             typec_con: connector {
                 compatible = "usb-c-connector";
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/usb-xhci.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/usb-xhci.yaml
index 180a261c3e8f..4238ae896ef6 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/usb-xhci.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/usb-xhci.yaml
@@ -29,6 +29,12 @@ properties:
     description: Interrupt moderation interval
     default: 5000
 
+  num-hc-interrupters:
+    description: Maximum number of interrupters to allocate
+    $ref: /schemas/types.yaml#/definitions/uint16
+    minimum: 1
+    maximum: 1024
+
 additionalProperties: true
 
 examples:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml
index 868dffe314bc..a7f75fe36665 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx udc controller
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@amd.com>
+  - Mubin Sayyed <mubin.sayyed@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 properties:
   compatible:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 309b94c328c8..1a0dc04f1db4 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -79,6 +79,8 @@ patternProperties:
     description: ALFA Network Inc.
   "^allegro,.*":
     description: Allegro DVT
+  "^alliedvision,.*":
+    description: Allied Vision Technologies GmbH
   "^allo,.*":
     description: Allo.com
   "^allwinner,.*":
@@ -119,6 +121,8 @@ patternProperties:
     description: Andes Technology Corporation
   "^anvo,.*":
     description: Anvo-Systems Dresden GmbH
+  "^aosong,.*":
+    description: Guangzhou Aosong Electronic Co., Ltd.
   "^apm,.*":
     description: Applied Micro Circuits Corporation (APM)
   "^apple,.*":
@@ -294,6 +298,8 @@ patternProperties:
     description: CompuLab Ltd.
   "^congatec,.*":
     description: congatec GmbH
+  "^coolpi,.*":
+    description: cool-pi.com
   "^coreriver,.*":
     description: CORERIVER Semiconductor Co.,Ltd.
   "^corpro,.*":
@@ -352,6 +358,8 @@ patternProperties:
     description: Digi International Inc.
   "^digilent,.*":
     description: Diglent, Inc.
+  "^dimonoff,.*":
+    description: Dimonoff inc.
   "^diodes,.*":
     description: Diodes, Inc.
   "^dioo,.*":
@@ -474,6 +482,8 @@ patternProperties:
     description: Fairphone B.V.
   "^faraday,.*":
     description: Faraday Technology Corporation
+  "^fascontek,.*":
+    description: Fascontek
   "^fastrax,.*":
     description: Fastrax Oy
   "^fcs,.*":
@@ -502,6 +512,8 @@ patternProperties:
     description: Fujitsu Ltd.
   "^fxtec,.*":
     description: FX Technology Ltd.
+  "^galaxycore,.*":
+    description: GalaxyCore Inc.
   "^gardena,.*":
     description: GARDENA GmbH
   "^gateway,.*":
@@ -597,6 +609,8 @@ patternProperties:
     description: Hewlett Packard Enterprise
   "^hsg,.*":
     description: HannStar Display Co.
+  "^htc,.*":
+    description: HTC Corporation
   "^huawei,.*":
     description: Huawei Technologies Co., Ltd.
   "^hugsun,.*":
@@ -1179,6 +1193,8 @@ patternProperties:
     description: Shenzhen Roofull Technology Co, Ltd
   "^roseapplepi,.*":
     description: RoseapplePi.org
+  "^rve,.*":
+    description: Recharge Véhicule Électrique (RVE) inc.
   "^saef,.*":
     description: Saef Technology Limited
   "^samsung,.*":
@@ -1281,6 +1297,8 @@ patternProperties:
     description: Skyworks Solutions, Inc.
   "^smartlabs,.*":
     description: SmartLabs LLC
+  "^smi,.*":
+    description: Silicon Motion Technology Corporation
   "^smsc,.*":
     description: Standard Microsystems Corporation
   "^snps,.*":
@@ -1381,6 +1399,8 @@ patternProperties:
     description: Technologic Systems
   "^techstar,.*":
     description: Shenzhen Techstar Electronics Co., Ltd.
+  "^techwell,.*":
+    description: Techwell, Inc.
   "^teejet,.*":
     description: TeeJet
   "^teltonika,.*":
@@ -1434,6 +1454,8 @@ patternProperties:
     description: TPO
   "^tq,.*":
     description: TQ-Systems GmbH
+  "^transpeed,.*":
+    description: Transpeed
   "^traverse,.*":
     description: Traverse Technologies Australia Pty Ltd
   "^tronfy,.*":
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
new file mode 100644
index 000000000000..ef70fa2c0c5d
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/amd,axi-1wire-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD AXI 1-wire bus host for programmable logic
+
+maintainers:
+  - Kris Chaplin <kris.chaplin@amd.com>
+
+properties:
+  compatible:
+    const: amd,axi-1wire-host
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    onewire@a0000000 {
+        compatible = "amd,axi-1wire-host";
+        reg = <0xa0000000 0x10000>;
+        clocks = <&zynqmp_clk 0x47>;
+        interrupts = <GIC_SPI 0x59 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index 274519fc24fd..64c8f7393809 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -6,13 +6,13 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Allwinner A10 Watchdog
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     oneOf:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml
index fea84f5b7e6d..6425fe51d20c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml
@@ -6,12 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Alphascale asm9260 Watchdog timer
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Oleksij Rempel <linux@rempel-privat.de>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     const: alphascale,asm9260-wdt
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
index 929681127df0..21872e15916c 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
@@ -6,12 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Apple SoC Watchdog
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Sven Peter <sven@svenpeter.dev>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     items:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
index b5573852ef5a..8e9d0b7e8244 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
@@ -6,12 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: ARM Secure Monitor Call based watchdog
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Julius Werner <jwerner@chromium.org>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     enum:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
index 526ff908d134..e898167ef628 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
@@ -6,14 +6,14 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: BCM63xx and BCM7038 watchdog timer
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
   - Justin Chen <justinpopo6@gmail.com>
   - Rafał Miłecki <rafal@milecki.pl>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     enum:
@@ -29,11 +29,11 @@ properties:
       The clock running the watchdog. If no clock is found the driver will
       default to 27000000 Hz.
 
-unevaluatedProperties: false
-
 required:
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     watchdog@f040a7e8 {
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/cnxt,cx92755-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/cnxt,cx92755-wdt.yaml
index 1844d7e026fe..13236ee61f6f 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/cnxt,cx92755-wdt.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/cnxt,cx92755-wdt.yaml
@@ -12,12 +12,12 @@ description: |
   timer counters. The first timer (called "Timer A") is the only one that can be
   used as watchdog.
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Baruch Siach <baruch@tkos.co.il>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     const: cnxt,cx92755-wdt
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml
index f058628bb632..c8f698120597 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/watchdog/dlg,da9062-watchdog.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dialog Semiconductor DA9062/61 Watchdog Timer
+title: Dialog Semiconductor DA906{1,2,3} Watchdog Timer
 
 maintainers:
   - Steve Twiss <stwiss.opensource@diasemi.com>
@@ -14,9 +14,13 @@ allOf:
 
 properties:
   compatible:
-    enum: 
-      - dlg,da9061-watchdog
-      - dlg,da9062-watchdog
+    oneOf:
+      - enum:
+          - dlg,da9062-watchdog
+          - dlg,da9063-watchdog
+      - items:
+          - const: dlg,da9061-watchdog
+          - const: dlg,da9062-watchdog
 
   dlg,use-sw-pm:
     type: boolean
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml
index 1437ff8a122f..8231dde2bfa6 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml
@@ -9,6 +9,9 @@ title: Intel Keem Bay SoC non-secure Watchdog Timer
 maintainers:
   - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     enum:
@@ -37,7 +40,7 @@ required:
   - interrupt-names
   - clocks
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
index 1a6490c43d89..442c21f12a3b 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
@@ -6,14 +6,14 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Maxim 63xx Watchdog Timers
 
-allOf:
-  - $ref: watchdog.yaml#
-  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
-
 maintainers:
   - Marc Zyngier <maz@kernel.org>
   - Linus Walleij <linus.walleij@linaro.org>
 
+allOf:
+  - $ref: watchdog.yaml#
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+
 properties:
   compatible:
     enum:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml
index cc502838bc39..8d2520241e37 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml
@@ -25,6 +25,7 @@ properties:
           - mediatek,mt6735-wdt
           - mediatek,mt6795-wdt
           - mediatek,mt7986-wdt
+          - mediatek,mt7988-wdt
           - mediatek,mt8183-wdt
           - mediatek,mt8186-wdt
           - mediatek,mt8188-wdt
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/nxp,pnx4008-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/nxp,pnx4008-wdt.yaml
new file mode 100644
index 000000000000..35ef940cbabe
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/nxp,pnx4008-wdt.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/nxp,pnx4008-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PNX watchdog timer
+
+maintainers:
+  - Roland Stigge <stigge@antcom.de>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: nxp,pnx4008-wdt
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@4003c000 {
+        compatible = "nxp,pnx4008-wdt";
+        reg = <0x4003c000 0x1000>;
+        timeout-sec = <10>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
deleted file mode 100644
index 4b76bec62af9..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* NXP PNX watchdog timer
-
-Required properties:
-- compatible: must be "nxp,pnx4008-wdt"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-Optional properties:
-- timeout-sec: contains the watchdog timeout in seconds.
-
-Example:
-
-	watchdog@4003c000 {
-		compatible = "nxp,pnx4008-wdt";
-		reg = <0x4003C000 0x1000>;
-		timeout-sec = <10>;
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/qca,ar7130-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/qca,ar7130-wdt.yaml
new file mode 100644
index 000000000000..82040ca10eda
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/qca,ar7130-wdt.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/qca,ar7130-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR7130 Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Gabor Juhos <juhosg@openwrt.org>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: qca,ar7130-wdt
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@18060008 {
+        compatible = "qca,ar7130-wdt";
+        reg = <0x18060008 0x8>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/qca-ar7130-wdt.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/qca-ar7130-wdt.txt
deleted file mode 100644
index 7a89e5f85415..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/qca-ar7130-wdt.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* Qualcomm Atheros AR7130 Watchdog Timer (WDT) Controller
-
-Required properties:
-- compatible: must be "qca,ar7130-wdt"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-Example:
-
-wdt@18060008 {
-	compatible = "qca,ar9330-wdt", "qca,ar7130-wdt";
-	reg = <0x18060008 0x8>;
-};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml
index 568eb8480fc3..dc6af204e8af 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml
@@ -30,22 +30,27 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/spmi/spmi.h>
 
-    pmic@0 {
-        compatible = "qcom,pm8916", "qcom,spmi-pmic";
-        reg = <0x0 SPMI_USID>;
-        #address-cells = <1>;
+    spmi {
+        #address-cells = <2>;
         #size-cells = <0>;
 
-        pon@800 {
-            compatible = "qcom,pm8916-pon";
-            reg = <0x800>;
-            mode-bootloader = <0x2>;
-            mode-recovery = <0x1>;
-
-            watchdog {
-                compatible = "qcom,pm8916-wdt";
-                interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
-                timeout-sec = <60>;
+        pmic@0 {
+            compatible = "qcom,pm8916", "qcom,spmi-pmic";
+            reg = <0x0 SPMI_USID>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pon@800 {
+                compatible = "qcom,pm8916-pon";
+                reg = <0x800>;
+                mode-bootloader = <0x2>;
+                mode-recovery = <0x1>;
+
+                watchdog {
+                    compatible = "qcom,pm8916-wdt";
+                    interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
+                    timeout-sec = <60>;
+                };
             };
         };
     };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
index c12bc852aedc..a4f35c598cdb 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
@@ -123,7 +123,7 @@ examples:
         compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
         reg = <0x17c10000 0x1000>;
         clocks = <&sleep_clk>;
-        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
         timeout-sec = <10>;
     };
 
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt
deleted file mode 100644
index 05653054bd5b..000000000000
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Realtek RTD1295 Watchdog
-========================
-
-Required properties:
-
-- compatible :  Should be "realtek,rtd1295-watchdog"
-- reg        :  Specifies the physical base address and size of registers
-- clocks     :  Specifies one clock input
-
-
-Example:
-
-	watchdog@98007680 {
-		compatible = "realtek,rtd1295-watchdog";
-		reg = <0x98007680 0x100>;
-		clocks = <&osc27M>;
-	};
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/realtek,rtd1295-watchdog.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/realtek,rtd1295-watchdog.yaml
new file mode 100644
index 000000000000..2a0ea1696317
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/realtek,rtd1295-watchdog.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/realtek,rtd1295-watchdog.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTD1295 Watchdog
+
+maintainers:
+  - Andreas Färber <afaerber@suse.de>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: realtek,rtd1295-watchdog
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@98007680 {
+        compatible = "realtek,rtd1295-watchdog";
+        reg = <0x98007680 0x100>;
+        clocks = <&osc27M>;
+    };
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
index 8fb6656ba0c2..77a5ddd0426e 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -16,14 +16,20 @@ description: |+
 
 properties:
   compatible:
-    enum:
-      - samsung,s3c2410-wdt                   # for S3C2410
-      - samsung,s3c6410-wdt                   # for S3C6410, S5PV210 and Exynos4
-      - samsung,exynos5250-wdt                # for Exynos5250
-      - samsung,exynos5420-wdt                # for Exynos5420
-      - samsung,exynos7-wdt                   # for Exynos7
-      - samsung,exynos850-wdt                 # for Exynos850
-      - samsung,exynosautov9-wdt              # for Exynosautov9
+    oneOf:
+      - enum:
+          - google,gs101-wdt                      # for Google gs101
+          - samsung,s3c2410-wdt                   # for S3C2410
+          - samsung,s3c6410-wdt                   # for S3C6410, S5PV210 and Exynos4
+          - samsung,exynos5250-wdt                # for Exynos5250
+          - samsung,exynos5420-wdt                # for Exynos5420
+          - samsung,exynos7-wdt                   # for Exynos7
+          - samsung,exynos850-wdt                 # for Exynos850
+          - samsung,exynosautov9-wdt              # for Exynosautov9
+      - items:
+          - enum:
+              - tesla,fsd-wdt
+          - const: samsung,exynos7-wdt
 
   reg:
     maxItems: 1
@@ -42,13 +48,14 @@ properties:
   samsung,cluster-index:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
-      Index of CPU cluster on which watchdog is running (in case of Exynos850)
+      Index of CPU cluster on which watchdog is running (in case of Exynos850
+      or Google gs101).
 
   samsung,syscon-phandle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Phandle to the PMU system controller node (in case of Exynos5250,
-      Exynos5420, Exynos7 and Exynos850).
+      Exynos5420, Exynos7, Exynos850 and gs101).
 
 required:
   - compatible
@@ -64,6 +71,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - google,gs101-wdt
               - samsung,exynos5250-wdt
               - samsung,exynos5420-wdt
               - samsung,exynos7-wdt
@@ -77,6 +85,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - google,gs101-wdt
               - samsung,exynos850-wdt
               - samsung,exynosautov9-wdt
     then:
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
index 76eceeddd150..c7aab0418a32 100644
--- linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
@@ -6,12 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Synopsys Designware Watchdog Timer
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Jamie Iles <jamie@jamieiles.com>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -73,13 +73,13 @@ properties:
     minItems: 16
     maxItems: 16
 
-unevaluatedProperties: false
-
 required:
   - compatible
   - reg
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     watchdog@ffd02000 {
diff --git linux-libre-6.7-gnu/Documentation/devicetree/bindings/watchdog/technologic,ts7200-wdt.yaml linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/technologic,ts7200-wdt.yaml
new file mode 100644
index 000000000000..7e4bfef152f8
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/technologic,ts7200-wdt.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/technologic,ts7200-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Technologic Systems TS-72xx based SBCs watchdog
+
+maintainers:
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: technologic,ts7200-wdt
+      - items:
+          - enum:
+              - technologic,ts7300-wdt
+              - technologic,ts7260-wdt
+              - technologic,ts7250-wdt
+          - const: technologic,ts7200-wdt
+
+  reg:
+    items:
+      - description: control register
+      - description: feed register
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@23800000 {
+      compatible = "technologic,ts7200-wdt";
+      reg = <0x23800000 0x01>, <0x23c00000 0x01>;
+      timeout-sec = <30>;
+    };
+
+...
diff --git linux-libre-6.7-gnu/Documentation/doc-guide/sphinx.rst linux-libre-6.8-gnu/Documentation/doc-guide/sphinx.rst
index cd8ad7904491..3d125fb4139d 100644
--- linux-libre-6.7-gnu/Documentation/doc-guide/sphinx.rst
+++ linux-libre-6.8-gnu/Documentation/doc-guide/sphinx.rst
@@ -28,7 +28,7 @@ Sphinx Install
 ==============
 
 The ReST markups currently used by the Documentation/ files are meant to be
-built with ``Sphinx`` version 1.7 or higher.
+built with ``Sphinx`` version 2.4.4 or higher.
 
 There's a script that checks for the Sphinx requirements. Please see
 :ref:`sphinx-pre-install` for further details.
@@ -435,6 +435,15 @@ path.
 For information on cross-referencing to kernel-doc functions or types, see
 Documentation/doc-guide/kernel-doc.rst.
 
+Referencing commits
+~~~~~~~~~~~~~~~~~~~
+
+References to git commits are automatically hyperlinked given that they are
+written in one of these formats::
+
+    commit 72bf4f1767f0
+    commit 72bf4f1767f0 ("net: do not leave an empty skb in write queue")
+
 .. _sphinx_kfigure:
 
 Figures & Images
diff --git linux-libre-6.7-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst linux-libre-6.8-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
new file mode 100644
index 000000000000..de587cf9cbed
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
@@ -0,0 +1,824 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+IAA Compression Accelerator Crypto Driver
+=========================================
+
+Tom Zanussi <tom.zanussi@linux.intel.com>
+
+The IAA crypto driver supports compression/decompression compatible
+with the DEFLATE compression standard described in RFC 1951, which is
+the compression/decompression algorithm exported by this module.
+
+The IAA hardware spec can be found here:
+
+  https://cdrdv2.intel.com/v1/dl/getContent/721858
+
+The iaa_crypto driver is designed to work as a layer underneath
+higher-level compression devices such as zswap.
+
+Users can select IAA compress/decompress acceleration by specifying
+one of the supported IAA compression algorithms in whatever facility
+allows compression algorithms to be selected.
+
+For example, a zswap device can select the IAA 'fixed' mode
+represented by selecting the 'deflate-iaa' crypto compression
+algorithm::
+
+  # echo deflate-iaa > /sys/module/zswap/parameters/compressor
+
+This will tell zswap to use the IAA 'fixed' compression mode for all
+compresses and decompresses.
+
+Currently, there is only one compression modes available, 'fixed'
+mode.
+
+The 'fixed' compression mode implements the compression scheme
+specified by RFC 1951 and is given the crypto algorithm name
+'deflate-iaa'.  (Because the IAA hardware has a 4k history-window
+limitation, only buffers <= 4k, or that have been compressed using a
+<= 4k history window, are technically compliant with the deflate spec,
+which allows for a window of up to 32k.  Because of this limitation,
+the IAA fixed mode deflate algorithm is given its own algorithm name
+rather than simply 'deflate').
+
+
+Config options and other setup
+==============================
+
+The IAA crypto driver is available via menuconfig using the following
+path::
+
+  Cryptographic API -> Hardware crypto devices -> Support for Intel(R) IAA Compression Accelerator
+
+In the configuration file the option called CONFIG_CRYPTO_DEV_IAA_CRYPTO.
+
+The IAA crypto driver also supports statistics, which are available
+via menuconfig using the following path::
+
+  Cryptographic API -> Hardware crypto devices -> Support for Intel(R) IAA Compression -> Enable Intel(R) IAA Compression Accelerator Statistics
+
+In the configuration file the option called CONFIG_CRYPTO_DEV_IAA_CRYPTO_STATS.
+
+The following config options should also be enabled::
+
+  CONFIG_IRQ_REMAP=y
+  CONFIG_INTEL_IOMMU=y
+  CONFIG_INTEL_IOMMU_SVM=y
+  CONFIG_PCI_ATS=y
+  CONFIG_PCI_PRI=y
+  CONFIG_PCI_PASID=y
+  CONFIG_INTEL_IDXD=m
+  CONFIG_INTEL_IDXD_SVM=y
+
+IAA is one of the first Intel accelerator IPs that can work in
+conjunction with the Intel IOMMU.  There are multiple modes that exist
+for testing. Based on IOMMU configuration, there are 3 modes::
+
+  - Scalable
+  - Legacy
+  - No IOMMU
+
+
+Scalable mode
+-------------
+
+Scalable mode supports Shared Virtual Memory (SVM or SVA). It is
+entered when using the kernel boot commandline::
+
+  intel_iommu=on,sm_on
+
+with VT-d turned on in BIOS.
+
+With scalable mode, both shared and dedicated workqueues are available
+for use.
+
+For scalable mode, the following BIOS settings should be enabled::
+
+  Socket Configuration > IIO Configuration > Intel VT for Directed I/O (VT-d) > Intel VT for Directed I/O
+
+  Socket Configuration > IIO Configuration > PCIe ENQCMD > ENQCMDS
+
+
+Legacy mode
+-----------
+
+Legacy mode is entered when using the kernel boot commandline::
+
+  intel_iommu=off
+
+or VT-d is not turned on in BIOS.
+
+If you have booted into Linux and not sure if VT-d is on, do a "dmesg
+| grep -i dmar". If you don't see a number of DMAR devices enumerated,
+most likely VT-d is not on.
+
+With legacy mode, only dedicated workqueues are available for use.
+
+
+No IOMMU mode
+-------------
+
+No IOMMU mode is entered when using the kernel boot commandline::
+
+  iommu=off.
+
+With no IOMMU mode, only dedicated workqueues are available for use.
+
+
+Usage
+=====
+
+accel-config
+------------
+
+When loaded, the iaa_crypto driver automatically creates a default
+configuration and enables it, and assigns default driver attributes.
+If a different configuration or set of driver attributes is required,
+the user must first disable the IAA devices and workqueues, reset the
+configuration, and then re-register the deflate-iaa algorithm with the
+crypto subsystem by removing and reinserting the iaa_crypto module.
+
+The :ref:`iaa_disable_script` in the 'Use Cases'
+section below can be used to disable the default configuration.
+
+See :ref:`iaa_default_config` below for details of the default
+configuration.
+
+More likely than not, however, and because of the complexity and
+configurability of the accelerator devices, the user will want to
+configure the device and manually enable the desired devices and
+workqueues.
+
+The userspace tool to help doing that is called accel-config.  Using
+accel-config to configure device or loading a previously saved config
+is highly recommended.  The device can be controlled via sysfs
+directly but comes with the warning that you should do this ONLY if
+you know exactly what you are doing.  The following sections will not
+cover the sysfs interface but assumes you will be using accel-config.
+
+The :ref:`iaa_sysfs_config` section in the appendix below can be
+consulted for the sysfs interface details if interested.
+
+The accel-config tool along with instructions for building it can be
+found here:
+
+  https://github.com/intel/idxd-config/#readme
+
+Typical usage
+-------------
+
+In order for the iaa_crypto module to actually do any
+compression/decompression work on behalf of a facility, one or more
+IAA workqueues need to be bound to the iaa_crypto driver.
+
+For instance, here's an example of configuring an IAA workqueue and
+binding it to the iaa_crypto driver (note that device names are
+specified as 'iax' rather than 'iaa' - this is because upstream still
+has the old 'iax' device naming in place) ::
+
+  # configure wq1.0
+
+  accel-config config-wq --group-id=0 --mode=dedicated --type=kernel --name="iaa_crypto" --device_name="crypto" iax1/wq1.0
+
+  # enable IAA device iax1
+
+  accel-config enable-device iax1
+
+  # enable wq1.0 on IAX device iax1
+
+  accel-config enable-wq iax1/wq1.0
+
+Whenever a new workqueue is bound to or unbound from the iaa_crypto
+driver, the available workqueues are 'rebalanced' such that work
+submitted from a particular CPU is given to the most appropriate
+workqueue available.  Current best practice is to configure and bind
+at least one workqueue for each IAA device, but as long as there is at
+least one workqueue configured and bound to any IAA device in the
+system, the iaa_crypto driver will work, albeit most likely not as
+efficiently.
+
+The IAA crypto algorigthms is operational and compression and
+decompression operations are fully enabled following the successful
+binding of the first IAA workqueue to the iaa_crypto driver.
+
+Similarly, the IAA crypto algorithm is not operational and compression
+and decompression operations are disabled following the unbinding of
+the last IAA worqueue to the iaa_crypto driver.
+
+As a result, the IAA crypto algorithms and thus the IAA hardware are
+only available when one or more workques are bound to the iaa_crypto
+driver.
+
+When there are no IAA workqueues bound to the driver, the IAA crypto
+algorithms can be unregistered by removing the module.
+
+
+Driver attributes
+-----------------
+
+There are a couple user-configurable driver attributes that can be
+used to configure various modes of operation.  They're listed below,
+along with their default values.  To set any of these attributes, echo
+the appropriate values to the attribute file located under
+/sys/bus/dsa/drivers/crypto/
+
+The attribute settings at the time the IAA algorithms are registered
+are captured in each algorithm's crypto_ctx and used for all compresses
+and decompresses when using that algorithm.
+
+The available attributes are:
+
+  - verify_compress
+
+    Toggle compression verification.  If set, each compress will be
+    internally decompressed and the contents verified, returning error
+    codes if unsuccessful.  This can be toggled with 0/1::
+
+      echo 0 > /sys/bus/dsa/drivers/crypto/verify_compress
+
+    The default setting is '1' - verify all compresses.
+
+  - sync_mode
+
+    Select mode to be used to wait for completion of each compresses
+    and decompress operation.
+
+    The crypto async interface support implemented by iaa_crypto
+    provides an implementation that satisfies the interface but does
+    so in a synchronous manner - it fills and submits the IDXD
+    descriptor and then loops around waiting for it to complete before
+    returning.  This isn't a problem at the moment, since all existing
+    callers (e.g. zswap) wrap any asynchronous callees in a
+    synchronous wrapper anyway.
+
+    The iaa_crypto driver does however provide true asynchronous
+    support for callers that can make use of it.  In this mode, it
+    fills and submits the IDXD descriptor, then returns immediately
+    with -EINPROGRESS.  The caller can then either poll for completion
+    itself, which requires specific code in the caller which currently
+    nothing in the upstream kernel implements, or go to sleep and wait
+    for an interrupt signaling completion.  This latter mode is
+    supported by current users in the kernel such as zswap via
+    synchronous wrappers.  Although it is supported this mode is
+    significantly slower than the synchronous mode that does the
+    polling in the iaa_crypto driver previously mentioned.
+
+    This mode can be enabled by writing 'async_irq' to the sync_mode
+    iaa_crypto driver attribute::
+
+      echo async_irq > /sys/bus/dsa/drivers/crypto/sync_mode
+
+    Async mode without interrupts (caller must poll) can be enabled by
+    writing 'async' to it::
+
+      echo async > /sys/bus/dsa/drivers/crypto/sync_mode
+
+    The mode that does the polling in the iaa_crypto driver can be
+    enabled by writing 'sync' to it::
+
+      echo sync > /sys/bus/dsa/drivers/crypto/sync_mode
+
+    The default mode is 'sync'.
+
+.. _iaa_default_config:
+
+IAA Default Configuration
+-------------------------
+
+When the iaa_crypto driver is loaded, each IAA device has a single
+work queue configured for it, with the following attributes::
+
+          mode              "dedicated"
+          threshold         0
+          size              Total WQ Size from WQCAP
+          priority          10
+          type              IDXD_WQT_KERNEL
+          group             0
+          name              "iaa_crypto"
+          driver_name       "crypto"
+
+The devices and workqueues are also enabled and therefore the driver
+is ready to be used without any additional configuration.
+
+The default driver attributes in effect when the driver is loaded are::
+
+          sync_mode         "sync"
+          verify_compress   1
+
+In order to change either the device/work queue or driver attributes,
+the enabled devices and workqueues must first be disabled.  In order
+to have the new configuration applied to the deflate-iaa crypto
+algorithm, it needs to be re-registered by removing and reinserting
+the iaa_crypto module.  The :ref:`iaa_disable_script` in the 'Use
+Cases' section below can be used to disable the default configuration.
+
+Statistics
+==========
+
+If the optional debugfs statistics support is enabled, the IAA crypto
+driver will generate statistics which can be accessed in debugfs at::
+
+  # ls -al /sys/kernel/debug/iaa-crypto/
+  total 0
+  drwxr-xr-x  2 root root 0 Mar  3 09:35 .
+  drwx------ 47 root root 0 Mar  3 09:35 ..
+  -rw-r--r--  1 root root 0 Mar  3 09:35 max_acomp_delay_ns
+  -rw-r--r--  1 root root 0 Mar  3 09:35 max_adecomp_delay_ns
+  -rw-r--r--  1 root root 0 Mar  3 09:35 max_comp_delay_ns
+  -rw-r--r--  1 root root 0 Mar  3 09:35 max_decomp_delay_ns
+  -rw-r--r--  1 root root 0 Mar  3 09:35 stats_reset
+  -rw-r--r--  1 root root 0 Mar  3 09:35 total_comp_bytes_out
+  -rw-r--r--  1 root root 0 Mar  3 09:35 total_comp_calls
+  -rw-r--r--  1 root root 0 Mar  3 09:35 total_decomp_bytes_in
+  -rw-r--r--  1 root root 0 Mar  3 09:35 total_decomp_calls
+  -rw-r--r--  1 root root 0 Mar  3 09:35 wq_stats
+
+Most of the above statisticss are self-explanatory.  The wq_stats file
+shows per-wq stats, a set for each iaa device and wq in addition to
+some global stats::
+
+  # cat wq_stats
+  global stats:
+    total_comp_calls: 100
+    total_decomp_calls: 100
+    total_comp_bytes_out: 22800
+    total_decomp_bytes_in: 22800
+    total_completion_einval_errors: 0
+    total_completion_timeout_errors: 0
+    total_completion_comp_buf_overflow_errors: 0
+
+  iaa device:
+    id: 1
+    n_wqs: 1
+    comp_calls: 0
+    comp_bytes: 0
+    decomp_calls: 0
+    decomp_bytes: 0
+    wqs:
+      name: iaa_crypto
+      comp_calls: 0
+      comp_bytes: 0
+      decomp_calls: 0
+      decomp_bytes: 0
+
+  iaa device:
+    id: 3
+    n_wqs: 1
+    comp_calls: 0
+    comp_bytes: 0
+    decomp_calls: 0
+    decomp_bytes: 0
+    wqs:
+      name: iaa_crypto
+      comp_calls: 0
+      comp_bytes: 0
+      decomp_calls: 0
+      decomp_bytes: 0
+
+  iaa device:
+    id: 5
+    n_wqs: 1
+    comp_calls: 100
+    comp_bytes: 22800
+    decomp_calls: 100
+    decomp_bytes: 22800
+    wqs:
+      name: iaa_crypto
+      comp_calls: 100
+      comp_bytes: 22800
+      decomp_calls: 100
+      decomp_bytes: 22800
+
+Writing 0 to 'stats_reset' resets all the stats, including the
+per-device and per-wq stats::
+
+  # echo 0 > stats_reset
+  # cat wq_stats
+    global stats:
+    total_comp_calls: 0
+    total_decomp_calls: 0
+    total_comp_bytes_out: 0
+    total_decomp_bytes_in: 0
+    total_completion_einval_errors: 0
+    total_completion_timeout_errors: 0
+    total_completion_comp_buf_overflow_errors: 0
+    ...
+
+
+Use cases
+=========
+
+Simple zswap test
+-----------------
+
+For this example, the kernel should be configured according to the
+dedicated mode options described above, and zswap should be enabled as
+well::
+
+  CONFIG_ZSWAP=y
+
+This is a simple test that uses iaa_compress as the compressor for a
+swap (zswap) device.  It sets up the zswap device and then uses the
+memory_memadvise program listed below to forcibly swap out and in a
+specified number of pages, demonstrating both compress and decompress.
+
+The zswap test expects the work queues for each IAA device on the
+system to be configured properly as a kernel workqueue with a
+workqueue driver_name of "crypto".
+
+The first step is to make sure the iaa_crypto module is loaded::
+
+  modprobe iaa_crypto
+
+If the IAA devices and workqueues haven't previously been disabled and
+reconfigured, then the default configuration should be in place and no
+further IAA configuration is necessary.  See :ref:`iaa_default_config`
+below for details of the default configuration.
+
+If the default configuration is in place, you should see the iaa
+devices and wq0s enabled::
+
+  # cat /sys/bus/dsa/devices/iax1/state
+  enabled
+  # cat /sys/bus/dsa/devices/iax1/wq1.0/state
+  enabled
+
+To demonstrate that the following steps work as expected, these
+commands can be used to enable debug output::
+
+  # echo -n 'module iaa_crypto +p' > /sys/kernel/debug/dynamic_debug/control
+  # echo -n 'module idxd +p' > /sys/kernel/debug/dynamic_debug/control
+
+Use the following commands to enable zswap::
+
+  # echo 0 > /sys/module/zswap/parameters/enabled
+  # echo 50 > /sys/module/zswap/parameters/max_pool_percent
+  # echo deflate-iaa > /sys/module/zswap/parameters/compressor
+  # echo zsmalloc > /sys/module/zswap/parameters/zpool
+  # echo 1 > /sys/module/zswap/parameters/enabled
+  # echo 0 > /sys/module/zswap/parameters/same_filled_pages_enabled
+  # echo 100 > /proc/sys/vm/swappiness
+  # echo never > /sys/kernel/mm/transparent_hugepage/enabled
+  # echo 1 > /proc/sys/vm/overcommit_memory
+
+Now you can now run the zswap workload you want to measure. For
+example, using the memory_memadvise code below, the following command
+will swap in and out 100 pages::
+
+  ./memory_madvise 100
+
+  Allocating 100 pages to swap in/out
+  Swapping out 100 pages
+  Swapping in 100 pages
+  Swapped out and in 100 pages
+
+You should see something like the following in the dmesg output::
+
+  [  404.202972] idxd 0000:e7:02.0: iaa_comp_acompress: dma_map_sg, src_addr 223925c000, nr_sgs 1, req->src 00000000ee7cb5e6, req->slen 4096, sg_dma_len(sg) 4096
+  [  404.202973] idxd 0000:e7:02.0: iaa_comp_acompress: dma_map_sg, dst_addr 21dadf8000, nr_sgs 1, req->dst 000000008d6acea8, req->dlen 4096, sg_dma_len(sg) 8192
+  [  404.202975] idxd 0000:e7:02.0: iaa_compress: desc->src1_addr 223925c000, desc->src1_size 4096, desc->dst_addr 21dadf8000, desc->max_dst_size 4096, desc->src2_addr 2203543000, desc->src2_size 1568
+  [  404.202981] idxd 0000:e7:02.0: iaa_compress_verify: (verify) desc->src1_addr 21dadf8000, desc->src1_size 228, desc->dst_addr 223925c000, desc->max_dst_size 4096, desc->src2_addr 0, desc->src2_size 0
+  ...
+
+Now that basic functionality has been demonstrated, the defaults can
+be erased and replaced with a different configuration.  To do that,
+first disable zswap::
+
+  # echo lzo > /sys/module/zswap/parameters/compressor
+  # swapoff -a
+  # echo 0 > /sys/module/zswap/parameters/accept_threshold_percent
+  # echo 0 > /sys/module/zswap/parameters/max_pool_percent
+  # echo 0 > /sys/module/zswap/parameters/enabled
+  # echo 0 > /sys/module/zswap/parameters/enabled
+
+Then run the :ref:`iaa_disable_script` in the 'Use Cases' section
+below to disable the default configuration.
+
+Finally turn swap back on::
+
+  # swapon -a
+
+Following all that the IAA device(s) can now be re-configured and
+enabled as desired for further testing.  Below is one example.
+
+The zswap test expects the work queues for each IAA device on the
+system to be configured properly as a kernel workqueue with a
+workqueue driver_name of "crypto".
+
+The below script automatically does that::
+
+  #!/bin/bash
+
+  echo "IAA devices:"
+  lspci -d:0cfe
+  echo "# IAA devices:"
+  lspci -d:0cfe | wc -l
+
+  #
+  # count iaa instances
+  #
+  iaa_dev_id="0cfe"
+  num_iaa=$(lspci -d:${iaa_dev_id} | wc -l)
+  echo "Found ${num_iaa} IAA instances"
+
+  #
+  # disable iaa wqs and devices
+  #
+  echo "Disable IAA"
+
+  for ((i = 1; i < ${num_iaa} * 2; i += 2)); do
+      echo disable wq iax${i}/wq${i}.0
+      accel-config disable-wq iax${i}/wq${i}.0
+      echo disable iaa iax${i}
+      accel-config disable-device iax${i}
+  done
+
+  echo "End Disable IAA"
+
+  #
+  # configure iaa wqs and devices
+  #
+  echo "Configure IAA"
+  for ((i = 1; i < ${num_iaa} * 2; i += 2)); do
+      accel-config config-wq --group-id=0 --mode=dedicated --size=128 --priority=10 --type=kernel --name="iaa_crypto" --driver_name="crypto" iax${i}/wq${i}
+  done
+
+  echo "End Configure IAA"
+
+  #
+  # enable iaa wqs and devices
+  #
+  echo "Enable IAA"
+
+  for ((i = 1; i < ${num_iaa} * 2; i += 2)); do
+      echo enable iaa iaa${i}
+      accel-config enable-device iaa${i}
+      echo enable wq iaa${i}/wq${i}.0
+      accel-config enable-wq iaa${i}/wq${i}.0
+  done
+
+  echo "End Enable IAA"
+
+When the workqueues are bound to the iaa_crypto driver, you should
+see something similar to the following in dmesg output if you've
+enabled debug output (echo -n 'module iaa_crypto +p' >
+/sys/kernel/debug/dynamic_debug/control)::
+
+  [   60.752344] idxd 0000:f6:02.0: add_iaa_wq: added wq 000000004068d14d to iaa 00000000c9585ba2, n_wq 1
+  [   60.752346] iaa_crypto: rebalance_wq_table: nr_nodes=2, nr_cpus 160, nr_iaa 8, cpus_per_iaa 20
+  [   60.752347] iaa_crypto: rebalance_wq_table: iaa=0
+  [   60.752349] idxd 0000:6a:02.0: request_iaa_wq: getting wq from iaa_device 0000000042d7bc52 (0)
+  [   60.752350] idxd 0000:6a:02.0: request_iaa_wq: returning unused wq 00000000c8bb4452 (0) from iaa device 0000000042d7bc52 (0)
+  [   60.752352] iaa_crypto: rebalance_wq_table: assigned wq for cpu=0, node=0 = wq 00000000c8bb4452
+  [   60.752354] iaa_crypto: rebalance_wq_table: iaa=0
+  [   60.752355] idxd 0000:6a:02.0: request_iaa_wq: getting wq from iaa_device 0000000042d7bc52 (0)
+  [   60.752356] idxd 0000:6a:02.0: request_iaa_wq: returning unused wq 00000000c8bb4452 (0) from iaa device 0000000042d7bc52 (0)
+  [   60.752358] iaa_crypto: rebalance_wq_table: assigned wq for cpu=1, node=0 = wq 00000000c8bb4452
+  [   60.752359] iaa_crypto: rebalance_wq_table: iaa=0
+  [   60.752360] idxd 0000:6a:02.0: request_iaa_wq: getting wq from iaa_device 0000000042d7bc52 (0)
+  [   60.752361] idxd 0000:6a:02.0: request_iaa_wq: returning unused wq 00000000c8bb4452 (0) from iaa device 0000000042d7bc52 (0)
+  [   60.752362] iaa_crypto: rebalance_wq_table: assigned wq for cpu=2, node=0 = wq 00000000c8bb4452
+  [   60.752364] iaa_crypto: rebalance_wq_table: iaa=0
+  .
+  .
+  .
+
+Once the workqueues and devices have been enabled, the IAA crypto
+algorithms are enabled and available.  When the IAA crypto algorithms
+have been successfully enabled, you should see the following dmesg
+output::
+
+  [   64.893759] iaa_crypto: iaa_crypto_enable: iaa_crypto now ENABLED
+
+Now run the following zswap-specific setup commands to have zswap use
+the 'fixed' compression mode::
+
+  echo 0 > /sys/module/zswap/parameters/enabled
+  echo 50 > /sys/module/zswap/parameters/max_pool_percent
+  echo deflate-iaa > /sys/module/zswap/parameters/compressor
+  echo zsmalloc > /sys/module/zswap/parameters/zpool
+  echo 1 > /sys/module/zswap/parameters/enabled
+  echo 0 > /sys/module/zswap/parameters/same_filled_pages_enabled
+
+  echo 100 > /proc/sys/vm/swappiness
+  echo never > /sys/kernel/mm/transparent_hugepage/enabled
+  echo 1 > /proc/sys/vm/overcommit_memory
+
+Finally, you can now run the zswap workload you want to measure. For
+example, using the code below, the following command will swap in and
+out 100 pages::
+
+  ./memory_madvise 100
+
+  Allocating 100 pages to swap in/out
+  Swapping out 100 pages
+  Swapping in 100 pages
+  Swapped out and in 100 pages
+
+You should see something like the following in the dmesg output if
+you've enabled debug output (echo -n 'module iaa_crypto +p' >
+/sys/kernel/debug/dynamic_debug/control)::
+
+  [  404.202972] idxd 0000:e7:02.0: iaa_comp_acompress: dma_map_sg, src_addr 223925c000, nr_sgs 1, req->src 00000000ee7cb5e6, req->slen 4096, sg_dma_len(sg) 4096
+  [  404.202973] idxd 0000:e7:02.0: iaa_comp_acompress: dma_map_sg, dst_addr 21dadf8000, nr_sgs 1, req->dst 000000008d6acea8, req->dlen 4096, sg_dma_len(sg) 8192
+  [  404.202975] idxd 0000:e7:02.0: iaa_compress: desc->src1_addr 223925c000, desc->src1_size 4096, desc->dst_addr 21dadf8000, desc->max_dst_size 4096, desc->src2_addr 2203543000, desc->src2_size 1568
+  [  404.202981] idxd 0000:e7:02.0: iaa_compress_verify: (verify) desc->src1_addr 21dadf8000, desc->src1_size 228, desc->dst_addr 223925c000, desc->max_dst_size 4096, desc->src2_addr 0, desc->src2_size 0
+  [  409.203227] idxd 0000:e7:02.0: iaa_comp_adecompress: dma_map_sg, src_addr 21ddd8b100, nr_sgs 1, req->src 0000000084adab64, req->slen 228, sg_dma_len(sg) 228
+  [  409.203235] idxd 0000:e7:02.0: iaa_comp_adecompress: dma_map_sg, dst_addr 21ee3dc000, nr_sgs 1, req->dst 000000004e2990d0, req->dlen 4096, sg_dma_len(sg) 4096
+  [  409.203239] idxd 0000:e7:02.0: iaa_decompress: desc->src1_addr 21ddd8b100, desc->src1_size 228, desc->dst_addr 21ee3dc000, desc->max_dst_size 4096, desc->src2_addr 0, desc->src2_size 0
+  [  409.203254] idxd 0000:e7:02.0: iaa_comp_adecompress: dma_map_sg, src_addr 21ddd8b100, nr_sgs 1, req->src 0000000084adab64, req->slen 228, sg_dma_len(sg) 228
+  [  409.203256] idxd 0000:e7:02.0: iaa_comp_adecompress: dma_map_sg, dst_addr 21f1551000, nr_sgs 1, req->dst 000000004e2990d0, req->dlen 4096, sg_dma_len(sg) 4096
+  [  409.203257] idxd 0000:e7:02.0: iaa_decompress: desc->src1_addr 21ddd8b100, desc->src1_size 228, desc->dst_addr 21f1551000, desc->max_dst_size 4096, desc->src2_addr 0, desc->src2_size 0
+
+In order to unregister the IAA crypto algorithms, and register new
+ones using different parameters, any users of the current algorithm
+should be stopped and the IAA workqueues and devices disabled.
+
+In the case of zswap, remove the IAA crypto algorithm as the
+compressor and turn off swap (to remove all references to
+iaa_crypto)::
+
+  echo lzo > /sys/module/zswap/parameters/compressor
+  swapoff -a
+
+  echo 0 > /sys/module/zswap/parameters/accept_threshold_percent
+  echo 0 > /sys/module/zswap/parameters/max_pool_percent
+  echo 0 > /sys/module/zswap/parameters/enabled
+
+Once zswap is disabled and no longer using iaa_crypto, the IAA wqs and
+devices can be disabled.
+
+.. _iaa_disable_script:
+
+IAA disable script
+------------------
+
+The below script automatically does that::
+
+  #!/bin/bash
+
+  echo "IAA devices:"
+  lspci -d:0cfe
+  echo "# IAA devices:"
+  lspci -d:0cfe | wc -l
+
+  #
+  # count iaa instances
+  #
+  iaa_dev_id="0cfe"
+  num_iaa=$(lspci -d:${iaa_dev_id} | wc -l)
+  echo "Found ${num_iaa} IAA instances"
+
+  #
+  # disable iaa wqs and devices
+  #
+  echo "Disable IAA"
+
+  for ((i = 1; i < ${num_iaa} * 2; i += 2)); do
+      echo disable wq iax${i}/wq${i}.0
+      accel-config disable-wq iax${i}/wq${i}.0
+      echo disable iaa iax${i}
+      accel-config disable-device iax${i}
+  done
+
+  echo "End Disable IAA"
+
+Finally, at this point the iaa_crypto module can be removed, which
+will unregister the current IAA crypto algorithms::
+
+  rmmod iaa_crypto
+
+
+memory_madvise.c (gcc -o memory_memadvise memory_madvise.c)::
+
+  #include <stdio.h>
+  #include <stdlib.h>
+  #include <string.h>
+  #include <unistd.h>
+  #include <sys/mman.h>
+  #include <linux/mman.h>
+
+  #ifndef MADV_PAGEOUT
+  #define MADV_PAGEOUT    21      /* force pages out immediately */
+  #endif
+
+  #define PG_SZ           4096
+
+  int main(int argc, char **argv)
+  {
+        int i, nr_pages = 1;
+        int64_t *dump_ptr;
+        char *addr, *a;
+        int loop = 1;
+
+        if (argc > 1)
+                nr_pages = atoi(argv[1]);
+
+        printf("Allocating %d pages to swap in/out\n", nr_pages);
+
+        /* allocate pages */
+        addr = mmap(NULL, nr_pages * PG_SZ, PROT_READ | PROT_WRITE, MAP_SHARED | MAP_ANONYMOUS, -1, 0);
+        *addr = 1;
+
+        /* initialize data in page to all '*' chars */
+        memset(addr, '*', nr_pages * PG_SZ);
+
+         printf("Swapping out %d pages\n", nr_pages);
+
+        /* Tell kernel to swap it out */
+        madvise(addr, nr_pages * PG_SZ, MADV_PAGEOUT);
+
+        while (loop > 0) {
+                /* Wait for swap out to finish */
+                sleep(5);
+
+                a = addr;
+
+                printf("Swapping in %d pages\n", nr_pages);
+
+                /* Access the page ... this will swap it back in again */
+                for (i = 0; i < nr_pages; i++) {
+                        if (a[0] != '*') {
+                                printf("Bad data from decompress!!!!!\n");
+
+                                dump_ptr = (int64_t *)a;
+                                 for (int j = 0; j < 100; j++) {
+                                        printf("  page %d data: %#llx\n", i, *dump_ptr);
+                                        dump_ptr++;
+                                }
+                        }
+
+                        a += PG_SZ;
+                }
+
+                loop --;
+        }
+
+       printf("Swapped out and in %d pages\n", nr_pages);
+
+Appendix
+========
+
+.. _iaa_sysfs_config:
+
+IAA sysfs config interface
+--------------------------
+
+Below is a description of the IAA sysfs interface, which as mentioned
+in the main document, should only be used if you know exactly what you
+are doing.  Even then, there's no compelling reason to use it directly
+since accel-config can do everything the sysfs interface can and in
+fact accel-config is based on it under the covers.
+
+The 'IAA config path' is /sys/bus/dsa/devices and contains
+subdirectories representing each IAA device, workqueue, engine, and
+group.  Note that in the sysfs interface, the IAA devices are actually
+named using iax e.g. iax1, iax3, etc. (Note that IAA devices are the
+odd-numbered devices; the even-numbered devices are DSA devices and
+can be ignored for IAA).
+
+The 'IAA device bind path' is /sys/bus/dsa/drivers/idxd/bind and is
+the file that is written to enable an IAA device.
+
+The 'IAA workqueue bind path' is /sys/bus/dsa/drivers/crypto/bind and
+is the file that is written to enable an IAA workqueue.
+
+Similarly /sys/bus/dsa/drivers/idxd/unbind and
+/sys/bus/dsa/drivers/crypto/unbind are used to disable IAA devices and
+workqueues.
+
+The basic sequence of commands needed to set up the IAA devices and
+workqueues is:
+
+For each device::
+  1) Disable any workqueues enabled on the device.  For example to
+     disable workques 0 and 1 on IAA device 3::
+
+       # echo wq3.0 > /sys/bus/dsa/drivers/crypto/unbind
+       # echo wq3.1 > /sys/bus/dsa/drivers/crypto/unbind
+
+  2) Disable the device. For example to disable IAA device 3::
+
+       # echo iax3 > /sys/bus/dsa/drivers/idxd/unbind
+
+  3) configure the desired workqueues.  For example, to configure
+     workqueue 3 on IAA device 3::
+
+       # echo dedicated > /sys/bus/dsa/devices/iax3/wq3.3/mode
+       # echo 128 > /sys/bus/dsa/devices/iax3/wq3.3/size
+       # echo 0 > /sys/bus/dsa/devices/iax3/wq3.3/group_id
+       # echo 10 > /sys/bus/dsa/devices/iax3/wq3.3/priority
+       # echo "kernel" > /sys/bus/dsa/devices/iax3/wq3.3/type
+       # echo "iaa_crypto" > /sys/bus/dsa/devices/iax3/wq3.3/name
+       # echo "crypto" > /sys/bus/dsa/devices/iax3/wq3.3/driver_name
+
+  4) Enable the device. For example to enable IAA device 3::
+
+       # echo iax3 > /sys/bus/dsa/drivers/idxd/bind
+
+  5) Enable the desired workqueues on the device.  For example to
+     enable workques 0 and 1 on IAA device 3::
+
+       # echo wq3.0 > /sys/bus/dsa/drivers/crypto/bind
+       # echo wq3.1 > /sys/bus/dsa/drivers/crypto/bind
diff --git linux-libre-6.7-gnu/Documentation/driver-api/crypto/iaa/index.rst linux-libre-6.8-gnu/Documentation/driver-api/crypto/iaa/index.rst
new file mode 100644
index 000000000000..aa6837e27264
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/driver-api/crypto/iaa/index.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================
+IAA (Intel Analytics Accelerator)
+=================================
+
+IAA provides hardware compression and decompression via the crypto
+API.
+
+.. toctree::
+   :maxdepth: 1
+
+   iaa-crypto
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git linux-libre-6.7-gnu/Documentation/driver-api/crypto/index.rst linux-libre-6.8-gnu/Documentation/driver-api/crypto/index.rst
new file mode 100644
index 000000000000..fb9709b98bea
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/driver-api/crypto/index.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============
+Crypto Drivers
+==============
+
+Documentation for crypto drivers that may need more involved setup and
+configuration.
+
+.. toctree::
+   :maxdepth: 1
+
+   iaa/index
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git linux-libre-6.7-gnu/Documentation/driver-api/device-io.rst linux-libre-6.8-gnu/Documentation/driver-api/device-io.rst
index 2c7abd234f4e..d55384b106bd 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/device-io.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/device-io.rst
@@ -408,11 +408,12 @@ functions for details on the CPU side of things.
 ioremap_uc()
 ------------
 
-ioremap_uc() behaves like ioremap() except that on the x86 architecture without
-'PAT' mode, it marks memory as uncached even when the MTRR has designated
-it as cacheable, see Documentation/arch/x86/pat.rst.
+ioremap_uc() is only meaningful on old x86-32 systems with the PAT extension,
+and on ia64 with its slightly unconventional ioremap() behavior, everywhere
+elss ioremap_uc() defaults to return NULL.
 
-Portable drivers should avoid the use of ioremap_uc().
+
+Portable drivers should avoid the use of ioremap_uc(), use ioremap() instead.
 
 ioremap_cache()
 ---------------
diff --git linux-libre-6.7-gnu/Documentation/driver-api/dpll.rst linux-libre-6.8-gnu/Documentation/driver-api/dpll.rst
index e3d593841aa7..ea8d16600e16 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/dpll.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/dpll.rst
@@ -545,7 +545,7 @@ In such scenario, dpll device input signal shall be also configurable
 to drive dpll with signal recovered from the PHY netdevice.
 This is done by exposing a pin to the netdevice - attaching pin to the
 netdevice itself with
-``netdev_dpll_pin_set(struct net_device *dev, struct dpll_pin *dpll_pin)``.
+``dpll_netdev_pin_set(struct net_device *dev, struct dpll_pin *dpll_pin)``.
 Exposed pin id handle ``DPLL_A_PIN_ID`` is then identifiable by the user
 as it is attached to rtnetlink respond to get ``RTM_NEWLINK`` command in
 nested attribute ``IFLA_DPLL_PIN``.
diff --git linux-libre-6.7-gnu/Documentation/driver-api/index.rst linux-libre-6.8-gnu/Documentation/driver-api/index.rst
index f549a68951d7..eba851605388 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/index.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/index.rst
@@ -9,11 +9,8 @@ of device drivers.  This document is an only somewhat organized collection
 of some of those interfaces — it will hopefully get better over time!  The
 available subsections can be seen below.
 
-.. class:: toc-title
-
-	   Table of contents
-
 .. toctree::
+   :caption: Table of contents
    :maxdepth: 2
 
    driver-model/index
@@ -81,10 +78,8 @@ available subsections can be seen below.
    backlight/lp855x-driver.rst
    connector
    console
-   dcdbas
    eisa
    isa
-   isapnp
    io-mapping
    io_ordering
    generic-counter
@@ -115,6 +110,9 @@ available subsections can be seen below.
    hte/index
    wmi
    dpll
+   wbrf
+   crypto/index
+   tee
 
 .. only::  subproject and html
 
diff --git linux-libre-6.7-gnu/Documentation/driver-api/media/camera-sensor.rst linux-libre-6.8-gnu/Documentation/driver-api/media/camera-sensor.rst
index 6456145f96ed..b4920b34cebc 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/media/camera-sensor.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/media/camera-sensor.rst
@@ -9,8 +9,8 @@ This document covers the in-kernel APIs only. For the best practices on
 userspace API implementation in camera sensor drivers, please see
 :ref:`media_using_camera_sensor_drivers`.
 
-CSI-2 and parallel (BT.601 and BT.656) busses
----------------------------------------------
+CSI-2, parallel and BT.656 buses
+--------------------------------
 
 Please see :ref:`transmitter-receiver`.
 
@@ -60,7 +60,8 @@ management over the pipeline.
 Camera sensor drivers are responsible for controlling the power state of the
 device they otherwise control as well. They shall use runtime PM to manage
 power states. Runtime PM shall be enabled at probe time and disabled at remove
-time. Drivers should enable runtime PM autosuspend.
+time. Drivers should enable runtime PM autosuspend. Also see
+:ref:`async sub-device registration <media-registering-async-subdevs>`.
 
 The runtime PM handlers shall handle clocks, regulators, GPIOs, and other
 system resources required to power the sensor up and down. For drivers that
diff --git linux-libre-6.7-gnu/Documentation/driver-api/media/drivers/ccs/mk-ccs-regs linux-libre-6.8-gnu/Documentation/driver-api/media/drivers/ccs/mk-ccs-regs
index 2a4edc7e051a..3d3152b45821 100755
--- linux-libre-6.7-gnu/Documentation/driver-api/media/drivers/ccs/mk-ccs-regs
+++ linux-libre-6.8-gnu/Documentation/driver-api/media/drivers/ccs/mk-ccs-regs
@@ -82,14 +82,6 @@ for my $fh ($H, $LH) {
 	print $fh "/* $license */\n$copyright$note\n";
 }
 
-sub bit_def($) {
-	my $bit = shift @_;
-
-	return "BIT($bit)" if defined $kernel;
-	return "(1U << $bit)" if $bit =~ /^[a-zA-Z0-9_]+$/;
-	return "(1U << ($bit))";
-}
-
 print $H <<EOF
 #ifndef __${uc_header}__
 #define __${uc_header}__
@@ -97,23 +89,63 @@ print $H <<EOF
 EOF
   ;
 
-print $H "#include <linux/bits.h>\n\n" if defined $kernel;
-
 print $H <<EOF
-#define CCS_FL_BASE		16
+#include <linux/bits.h>
+
+#include <media/v4l2-cci.h>
+
 EOF
-  ;
+	if defined $kernel;
+
+print $H "#define CCS_FL_BASE		" .
+    (defined $kernel ? "CCI_REG_PRIVATE_SHIFT" : 16) . "\n";
+
+my $flag = -1;
+my $all_flags;
+
+sub bit_def($) {
+	my $bit = shift @_;
+
+	if (defined $kernel) {
+		return "BIT$bit" if $bit =~ /^\(.*\)$/;
+		return "BIT($bit)";
+	}
+	return "(1U << $bit)";
+}
+
+sub flag_str($$) {
+	my ($flag, $check) = @_;
 
-print $H "#define CCS_FL_16BIT		" . bit_def("CCS_FL_BASE") . "\n";
-print $H "#define CCS_FL_32BIT		" . bit_def("CCS_FL_BASE + 1") . "\n";
-print $H "#define CCS_FL_FLOAT_IREAL	" . bit_def("CCS_FL_BASE + 2") . "\n";
-print $H "#define CCS_FL_IREAL		" . bit_def("CCS_FL_BASE + 3") . "\n";
+	$$flag++;
+
+	my $flag_str = !$$flag ? "CCS_FL_BASE" : "(CCS_FL_BASE + $$flag)";
+
+	$flag_str = bit_def($flag_str);
+
+	$$check .= " | " if defined $$check;
+
+	$$check .= $flag_str;
+
+	return $flag_str;
+}
+
+if (! defined $kernel) {
+	print $H "#define CCS_FL_16BIT		" . flag_str(\$flag, \$all_flags) . "\n";
+	print $H "#define CCS_FL_32BIT		" . flag_str(\$flag, \$all_flags) . "\n";
+}
+
+print $H "#define CCS_FL_FLOAT_IREAL	" . flag_str(\$flag, \$all_flags) . "\n";
+print $H "#define CCS_FL_IREAL		" . flag_str(\$flag, \$all_flags) . "\n";
+print $H "#define CCS_BUILD_BUG \\
+	BUILD_BUG_ON(~CCI_REG_PRIVATE_MASK & ($all_flags))\n"
+    if defined $kernel;
 
 print $H <<EOF
+
 #define CCS_R_ADDR(r)		((r) & 0xffff)
 
 EOF
-  ;
+    if ! defined $kernel;
 
 print $A <<EOF
 #include <stdint.h>
@@ -189,12 +221,12 @@ sub tabconv($) {
 	return (join "\n", @l) . "\n";
 }
 
-sub elem_size(@) {
+sub elem_bits(@) {
 	my @flags = @_;
 
-	return 2 if grep /^16$/, @flags;
-	return 4 if grep /^32$/, @flags;
-	return 1;
+	return 16 if grep /^16$/, @flags;
+	return 32 if grep /^32$/, @flags;
+	return 8;
 }
 
 sub arr_size($) {
@@ -296,9 +328,13 @@ while (<$R>) {
 
 			next if $#{$this{args}} + 1 != scalar keys %{$this{argparams}};
 
-			my $reg_formula = "($this{addr}";
+			my $reg_formula = "$this{addr}";
 			my $lim_formula;
 
+			chop $reg_formula;
+
+			$reg_formula = "(" . $reg_formula if $this{flagstring} ne "";
+
 			foreach my $arg (@{$this{args}}) {
 				my $d = $h->{$arg}->{discontig};
 				my $times = $h->{$arg}->{elsize} != 1 ?
@@ -315,11 +351,13 @@ while (<$R>) {
 				$lim_formula .= (defined $lim_formula ? " + " : "") . "($arg)$times";
 			}
 
-			$reg_formula .= ")\n";
+			$reg_formula .= ")";
 			$lim_formula =~ s/^\(([a-z0-9]+)\)$/$1/i;
 
 			print $H tabconv sprintf("#define %-62s %s", "CCS_R_" . (uc $this{name}) .
-			  $this{arglist}, $reg_formula);
+						 $this{arglist}, $reg_formula .
+						 (($this{flagstring} eq "") ? "" :
+						  " | " . $this{flagstring} . ")") . "\n");
 
 			print $H tabconv $hdr_data;
 			undef $hdr_data;
@@ -369,16 +407,23 @@ while (<$R>) {
 	$name =~ s/[,\.-]/_/g;
 
 	my $flagstring = "";
-	my $size = elem_size(@flags);
-	$flagstring .= "| CCS_FL_16BIT " if $size eq "2";
-	$flagstring .= "| CCS_FL_32BIT " if $size eq "4";
+	my $bits = elem_bits(@flags);
+	if (! defined $kernel) {
+		$flagstring .= "| CCS_FL_16BIT " if $bits == 16;
+		$flagstring .= "| CCS_FL_32BIT " if $bits == 32;
+	}
 	$flagstring .= "| CCS_FL_FLOAT_IREAL " if grep /^float_ireal$/, @flags;
 	$flagstring .= "| CCS_FL_IREAL " if grep /^ireal$/, @flags;
 	$flagstring =~ s/^\| //;
 	$flagstring =~ s/ $//;
 	$flagstring = "($flagstring)" if $flagstring =~ /\|/;
 	my $base_addr = $addr;
-	$addr = "($addr | $flagstring)" if $flagstring ne "";
+	$addr = "CCI_REG$bits($addr)" if defined $kernel;
+
+	if ($flagstring ne "" && !@$args) {
+		$addr = "($addr | $flagstring)";
+		$flagstring = "";
+	}
 
 	my $arglist = @$args ? "(" . (join ", ", @$args) . ")" : "";
 	$hdr_data .= sprintf "#define %-62s %s\n", "CCS_R_" . (uc $name), $addr
@@ -388,11 +433,12 @@ while (<$R>) {
 
 	%this = ( name => $name,
 		  addr => $addr,
+		  flagstring => $flagstring,
 		  base_addr => $base_addr,
 		  argparams => {},
 		  args => $args,
 		  arglist => $arglist,
-		  elsize => $size,
+		  elsize => $bits / 8,
 		);
 
 	if (!@$args) {
diff --git linux-libre-6.7-gnu/Documentation/driver-api/media/index.rst linux-libre-6.8-gnu/Documentation/driver-api/media/index.rst
index 08e206567408..d5593182a3f9 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/media/index.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/media/index.rst
@@ -20,13 +20,8 @@ Documentation/userspace-api/media/index.rst
   - for the userspace APIs used on media devices.
 
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+    :caption: Table of Contents
     :maxdepth: 5
     :numbered:
 
diff --git linux-libre-6.7-gnu/Documentation/driver-api/media/tx-rx.rst linux-libre-6.8-gnu/Documentation/driver-api/media/tx-rx.rst
index e1e9258dd862..29d66a47b56e 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/media/tx-rx.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/media/tx-rx.rst
@@ -6,8 +6,8 @@ Pixel data transmitter and receiver drivers
 ===========================================
 
 V4L2 supports various devices that transmit and receive pixel data. Examples of
-these devices include a camera sensor, a TV tuner and a parallel or a CSI-2
-receiver in an SoC.
+these devices include a camera sensor, a TV tuner and a parallel, a BT.656 or a
+CSI-2 receiver in an SoC.
 
 Bus types
 ---------
@@ -22,12 +22,13 @@ the host SoC. It is defined by the `MIPI alliance`_.
 
 .. _`MIPI alliance`: https://www.mipi.org/
 
-Parallel
-^^^^^^^^
+Parallel and BT.656
+^^^^^^^^^^^^^^^^^^^
 
-`BT.601`_ and `BT.656`_ are the most common parallel busses.
+The parallel and `BT.656`_ buses transport one bit of data on each clock cycle
+per data line. The parallel bus uses synchronisation and other additional
+signals whereas BT.656 embeds synchronisation.
 
-.. _`BT.601`: https://en.wikipedia.org/wiki/Rec._601
 .. _`BT.656`: https://en.wikipedia.org/wiki/ITU-R_BT.656
 
 Transmitter drivers
@@ -90,8 +91,8 @@ where
 	pixel rate on the camera sensor's pixel array which is indicated by the
 	:ref:`V4L2_CID_PIXEL_RATE <v4l2-cid-pixel-rate>` control.
 
-LP-11 and LP-111 modes
-^^^^^^^^^^^^^^^^^^^^^^
+LP-11 and LP-111 states
+^^^^^^^^^^^^^^^^^^^^^^^
 
 As part of transitioning to high speed mode, a CSI-2 transmitter typically
 briefly sets the bus to LP-11 or LP-111 state, depending on the PHY. This period
@@ -105,7 +106,7 @@ in software, especially when there is no interrupt telling something is
 happening.
 
 One way to address this is to configure the transmitter side explicitly to LP-11
-or LP-111 mode, which requires support from the transmitter hardware. This is
+or LP-111 state, which requires support from the transmitter hardware. This is
 not universally available. Many devices return to this state once streaming is
 stopped while the state after power-on is LP-00 or LP-000.
 
@@ -116,11 +117,11 @@ transitioning to streaming state, but not yet start streaming. Similarly, the
 to call ``.post_streamoff()`` for each successful call of ``.pre_streamon()``.
 
 In the context of CSI-2, the ``.pre_streamon()`` callback is used to transition
-the transmitter to the LP-11 or LP-111 mode. This also requires powering on the
+the transmitter to the LP-11 or LP-111 state. This also requires powering on the
 device, so this should be only done when it is needed.
 
-Receiver drivers that do not need explicit LP-11 or LP-111 mode setup are waived
-from calling the two callbacks.
+Receiver drivers that do not need explicit LP-11 or LP-111 state setup are
+waived from calling the two callbacks.
 
 Stopping the transmitter
 ^^^^^^^^^^^^^^^^^^^^^^^^
diff --git linux-libre-6.7-gnu/Documentation/driver-api/media/v4l2-subdev.rst linux-libre-6.8-gnu/Documentation/driver-api/media/v4l2-subdev.rst
index e56b50b3f203..1db2ba27c54c 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/media/v4l2-subdev.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/media/v4l2-subdev.rst
@@ -181,6 +181,8 @@ You can unregister a sub-device using:
 Afterwards the subdev module can be unloaded and
 :c:type:`sd <v4l2_subdev>`->dev == ``NULL``.
 
+.. _media-registering-async-subdevs:
+
 Registering asynchronous sub-devices
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
@@ -195,6 +197,11 @@ performed using the :c:func:`v4l2_async_unregister_subdev` call. Subdevices
 registered this way are stored in a global list of subdevices, ready to be
 picked up by bridge drivers.
 
+Drivers must complete all initialization of the sub-device before
+registering it using :c:func:`v4l2_async_register_subdev`, including
+enabling runtime PM. This is because the sub-device becomes accessible
+as soon as it gets registered.
+
 Asynchronous sub-device notifiers
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
@@ -562,8 +569,8 @@ device configuration. This is often implemented as e.g. an array of struct
 v4l2_mbus_framefmt, one entry for each pad, and similarly for crop and compose
 rectangles.
 
-In addition to the active configuration, each subdev file handle has an array of
-struct v4l2_subdev_pad_config, managed by the V4L2 core, which contains the try
+In addition to the active configuration, each subdev file handle has a struct
+v4l2_subdev_state, managed by the V4L2 core, which contains the try
 configuration.
 
 To simplify the subdev drivers the V4L2 subdev API now optionally supports a
diff --git linux-libre-6.7-gnu/Documentation/driver-api/mei/index.rst linux-libre-6.8-gnu/Documentation/driver-api/mei/index.rst
index 3a22b522ee78..eae6f18f18cf 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/mei/index.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/mei/index.rst
@@ -9,13 +9,8 @@ Intel(R) Management Engine Interface (Intel(R) MEI)
 **Copyright** |copy| 2019 Intel Corporation
 
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+   :caption: Table of Contents
    :maxdepth: 3
 
    mei
diff --git linux-libre-6.7-gnu/Documentation/driver-api/mtd/spi-nor.rst linux-libre-6.8-gnu/Documentation/driver-api/mtd/spi-nor.rst
index c22f8c0f7950..148fa4288760 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/mtd/spi-nor.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/mtd/spi-nor.rst
@@ -2,64 +2,204 @@
 SPI NOR framework
 =================
 
-Part I - Why do we need this framework?
----------------------------------------
-
-SPI bus controllers (drivers/spi/) only deal with streams of bytes; the bus
-controller operates agnostic of the specific device attached. However, some
-controllers (such as Freescale's QuadSPI controller) cannot easily handle
-arbitrary streams of bytes, but rather are designed specifically for SPI NOR.
-
-In particular, Freescale's QuadSPI controller must know the NOR commands to
-find the right LUT sequence. Unfortunately, the SPI subsystem has no notion of
-opcodes, addresses, or data payloads; a SPI controller simply knows to send or
-receive bytes (Tx and Rx). Therefore, we must define a new layering scheme under
-which the controller driver is aware of the opcodes, addressing, and other
-details of the SPI NOR protocol.
-
-Part II - How does the framework work?
---------------------------------------
-
-This framework just adds a new layer between the MTD and the SPI bus driver.
-With this new layer, the SPI NOR controller driver does not depend on the
-m25p80 code anymore.
-
-Before this framework, the layer is like::
-
-                   MTD
-         ------------------------
-                  m25p80
-         ------------------------
-	       SPI bus driver
-         ------------------------
-	        SPI NOR chip
-
-After this framework, the layer is like::
-
-                   MTD
-         ------------------------
-              SPI NOR framework
-         ------------------------
-                  m25p80
-         ------------------------
-	       SPI bus driver
-         ------------------------
-	       SPI NOR chip
-
-With the SPI NOR controller driver (Freescale QuadSPI), it looks like::
-
-                   MTD
-         ------------------------
-              SPI NOR framework
-         ------------------------
-                fsl-quadSPI
-         ------------------------
-	       SPI NOR chip
-
-Part III - How can drivers use the framework?
----------------------------------------------
-
-The main API is spi_nor_scan(). Before you call the hook, a driver should
-initialize the necessary fields for spi_nor{}. Please see
-drivers/mtd/spi-nor/spi-nor.c for detail. Please also refer to spi-fsl-qspi.c
-when you want to write a new driver for a SPI NOR controller.
+How to propose a new flash addition
+-----------------------------------
+
+Most SPI NOR flashes comply with the JEDEC JESD216
+Serial Flash Discoverable Parameter (SFDP) standard. SFDP describes
+the functional and feature capabilities of serial flash devices in a
+standard set of internal read-only parameter tables.
+
+The SPI NOR driver queries the SFDP tables in order to determine the
+flash's parameters and settings. If the flash defines the SFDP tables
+it's likely that you won't need a flash entry at all, and instead
+rely on the generic flash driver which probes the flash solely based
+on its SFDP data. All one has to do is to specify the "jedec,spi-nor"
+compatible in the device tree.
+
+There are cases however where you need to define an explicit flash
+entry. This typically happens when the flash has settings or support
+that is not covered by the SFDP tables (e.g. Block Protection), or
+when the flash contains mangled SFDP data. If the later, one needs
+to implement the ``spi_nor_fixups`` hooks in order to amend the SFDP
+parameters with the correct values.
+
+Minimum testing requirements
+-----------------------------
+
+Do all the tests from below and paste them in the commit's comments
+section, after the ``---`` marker.
+
+1) Specify the controller that you used to test the flash and specify
+   the frequency at which the flash was operated, e.g.::
+
+    This flash is populated on the X board and was tested at Y
+    frequency using the Z (put compatible) SPI controller.
+
+2) Dump the sysfs entries and print the md5/sha1/sha256 SFDP checksum::
+
+    root@1:~# cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
+    sst26vf064b
+    root@1:~# cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
+    bf2643
+    root@1:~# cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
+    sst
+    root@1:~# xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
+    53464450060102ff00060110300000ff81000106000100ffbf0001180002
+    0001fffffffffffffffffffffffffffffffffd20f1ffffffff0344eb086b
+    083b80bbfeffffffffff00ffffff440b0c200dd80fd810d820914824806f
+    1d81ed0f773830b030b0f7ffffff29c25cfff030c080ffffffffffffffff
+    ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
+    ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
+    ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
+    ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
+    ffffffffffffffffffffffffffffffffff0004fff37f0000f57f0000f9ff
+    7d00f57f0000f37f0000ffffffffffffffffffffffffffffffffffffffff
+    ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
+    ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
+    ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
+    ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
+    ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
+    ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
+    ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
+    ffffbf2643ffb95ffdff30f260f332ff0a122346ff0f19320f1919ffffff
+    ffffffff00669938ff05013506040232b03072428de89888a585c09faf5a
+    ffff06ec060c0003080bffffffffff07ffff0202ff060300fdfd040700fc
+    0300fefe0202070e
+    root@1:~# sha256sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
+    428f34d0461876f189ac97f93e68a05fa6428c6650b3b7baf736a921e5898ed1  /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
+
+   Please dump the SFDP tables using ``xxd -p``. It enables us to do
+   the reverse operation and convert the hexdump to binary with
+   ``xxd -rp``. Dumping the SFDP data with ``hexdump -Cv`` is accepted,
+   but less desirable.
+
+3) Dump debugfs data::
+
+    root@1:~# cat /sys/kernel/debug/spi-nor/spi0.0/capabilities
+    Supported read modes by the flash
+     1S-1S-1S
+      opcode		0x03
+      mode cycles	0
+      dummy cycles	0
+     1S-1S-1S (fast read)
+      opcode		0x0b
+      mode cycles	0
+      dummy cycles	8
+     1S-1S-2S
+      opcode		0x3b
+      mode cycles	0
+      dummy cycles	8
+     1S-2S-2S
+      opcode		0xbb
+      mode cycles	4
+      dummy cycles	0
+     1S-1S-4S
+      opcode		0x6b
+      mode cycles	0
+      dummy cycles	8
+     1S-4S-4S
+      opcode		0xeb
+      mode cycles	2
+      dummy cycles	4
+     4S-4S-4S
+      opcode		0x0b
+      mode cycles	2
+      dummy cycles	4
+
+    Supported page program modes by the flash
+     1S-1S-1S
+      opcode	0x02
+
+    root@1:~# cat /sys/kernel/debug/spi-nor/spi0.0/params
+    name		sst26vf064b
+    id			bf 26 43 bf 26 43
+    size		8.00 MiB
+    write size		1
+    page size		256
+    address nbytes	3
+    flags		HAS_LOCK | HAS_16BIT_SR | SOFT_RESET | SWP_IS_VOLATILE
+
+    opcodes
+     read		0xeb
+      dummy cycles	6
+     erase		0x20
+     program		0x02
+     8D extension	none
+
+    protocols
+     read		1S-4S-4S
+     write		1S-1S-1S
+     register		1S-1S-1S
+
+    erase commands
+     20 (4.00 KiB) [0]
+     d8 (8.00 KiB) [1]
+     d8 (32.0 KiB) [2]
+     d8 (64.0 KiB) [3]
+     c7 (8.00 MiB)
+
+    sector map
+     region (in hex)   | erase mask | flags
+     ------------------+------------+----------
+     00000000-00007fff |     [01  ] |
+     00008000-0000ffff |     [0 2 ] |
+     00010000-007effff |     [0  3] |
+     007f0000-007f7fff |     [0 2 ] |
+     007f8000-007fffff |     [01  ] |
+
+4) Use `mtd-utils <https://git.infradead.org/mtd-utils.git>`__
+   and verify that erase, read and page program operations work fine::
+
+    root@1:~# dd if=/dev/urandom of=./spi_test bs=1M count=2
+    2+0 records in
+    2+0 records out
+    2097152 bytes (2.1 MB, 2.0 MiB) copied, 0.848566 s, 2.5 MB/s
+
+    root@1:~# mtd_debug erase /dev/mtd0 0 2097152
+    Erased 2097152 bytes from address 0x00000000 in flash
+
+    root@1:~# mtd_debug read /dev/mtd0 0 2097152 spi_read
+    Copied 2097152 bytes from address 0x00000000 in flash to spi_read
+
+    root@1:~# hexdump spi_read
+    0000000 ffff ffff ffff ffff ffff ffff ffff ffff
+    *
+    0200000
+
+    root@1:~# sha256sum spi_read
+    4bda3a28f4ffe603c0ec1258c0034d65a1a0d35ab7bd523a834608adabf03cc5  spi_read
+
+    root@1:~# mtd_debug write /dev/mtd0 0 2097152 spi_test
+    Copied 2097152 bytes from spi_test to address 0x00000000 in flash
+
+    root@1:~# mtd_debug read /dev/mtd0 0 2097152 spi_read
+    Copied 2097152 bytes from address 0x00000000 in flash to spi_read
+
+    root@1:~# sha256sum spi*
+    c444216a6ba2a4a66cccd60a0dd062bce4b865dd52b200ef5e21838c4b899ac8  spi_read
+    c444216a6ba2a4a66cccd60a0dd062bce4b865dd52b200ef5e21838c4b899ac8  spi_test
+
+   If the flash comes erased by default and the previous erase was ignored,
+   we won't catch it, thus test the erase again::
+
+    root@1:~# mtd_debug erase /dev/mtd0 0 2097152
+    Erased 2097152 bytes from address 0x00000000 in flash
+
+    root@1:~# mtd_debug read /dev/mtd0 0 2097152 spi_read
+    Copied 2097152 bytes from address 0x00000000 in flash to spi_read
+
+    root@1:~# sha256sum spi*
+    4bda3a28f4ffe603c0ec1258c0034d65a1a0d35ab7bd523a834608adabf03cc5  spi_read
+    c444216a6ba2a4a66cccd60a0dd062bce4b865dd52b200ef5e21838c4b899ac8  spi_test
+
+   Dump some other relevant data::
+
+    root@1:~# mtd_debug info /dev/mtd0
+    mtd.type = MTD_NORFLASH
+    mtd.flags = MTD_CAP_NORFLASH
+    mtd.size = 8388608 (8M)
+    mtd.erasesize = 4096 (4K)
+    mtd.writesize = 1
+    mtd.oobsize = 0
+    regions = 0
diff --git linux-libre-6.7-gnu/Documentation/driver-api/nvmem.rst linux-libre-6.8-gnu/Documentation/driver-api/nvmem.rst
index de221e91c8e3..5d9500d21ecc 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/nvmem.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/nvmem.rst
@@ -41,7 +41,7 @@ A NVMEM provider can register with NVMEM core by supplying relevant
 nvmem configuration to nvmem_register(), on success core would return a valid
 nvmem_device pointer.
 
-nvmem_unregister(nvmem) is used to unregister a previously registered provider.
+nvmem_unregister() is used to unregister a previously registered provider.
 
 For example, a simple nvram case::
 
@@ -200,3 +200,9 @@ and let you add cells dynamically.
 Another use case for layouts is the post processing of cells. With layouts,
 it is possible to associate a custom post processing hook to a cell. It
 even possible to add this hook to cells not created by the layout itself.
+
+9. Internal kernel API
+======================
+
+.. kernel-doc:: drivers/nvmem/core.c
+   :export:
diff --git linux-libre-6.7-gnu/Documentation/driver-api/pci/index.rst linux-libre-6.8-gnu/Documentation/driver-api/pci/index.rst
index c6cf1fef61ce..a38e475cdbe3 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/pci/index.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/pci/index.rst
@@ -4,11 +4,8 @@
 The Linux PCI driver implementer's API guide
 ============================================
 
-.. class:: toc-title
-
-	   Table of contents
-
 .. toctree::
+   :caption: Table of contents
    :maxdepth: 2
 
    pci
diff --git linux-libre-6.7-gnu/Documentation/driver-api/pci/p2pdma.rst linux-libre-6.8-gnu/Documentation/driver-api/pci/p2pdma.rst
index 44deb52beeb4..d0b241628cf1 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/pci/p2pdma.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/pci/p2pdma.rst
@@ -83,19 +83,9 @@ this to include other types of resources like doorbells.
 Client Drivers
 --------------
 
-A client driver typically only has to conditionally change its DMA map
-routine to use the mapping function :c:func:`pci_p2pdma_map_sg()` instead
-of the usual :c:func:`dma_map_sg()` function. Memory mapped in this
-way does not need to be unmapped.
-
-The client may also, optionally, make use of
-:c:func:`is_pci_p2pdma_page()` to determine when to use the P2P mapping
-functions and when to use the regular mapping functions. In some
-situations, it may be more appropriate to use a flag to indicate a
-given request is P2P memory and map appropriately. It is important to
-ensure that struct pages that back P2P memory stay out of code that
-does not have support for them as other code may treat the pages as
-regular memory which may not be appropriate.
+A client driver only has to use the mapping API :c:func:`dma_map_sg()`
+and :c:func:`dma_unmap_sg()` functions as usual, and the implementation
+will do the right thing for the P2P capable memory.
 
 
 Orchestrator Drivers
diff --git linux-libre-6.7-gnu/Documentation/driver-api/pwm.rst linux-libre-6.8-gnu/Documentation/driver-api/pwm.rst
index bb264490a87a..3c28ccc4b611 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/pwm.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/pwm.rst
@@ -41,11 +41,20 @@ the getter, devm_pwm_get() and devm_fwnode_pwm_get(), also exist.
 
 After being requested, a PWM has to be configured using::
 
-	int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state);
+	int pwm_apply_might_sleep(struct pwm_device *pwm, struct pwm_state *state);
 
 This API controls both the PWM period/duty_cycle config and the
 enable/disable state.
 
+PWM devices can be used from atomic context, if the PWM does not sleep. You
+can check if this the case with::
+
+        bool pwm_might_sleep(struct pwm_device *pwm);
+
+If false, the PWM can also be configured from atomic context with::
+
+	int pwm_apply_atomic(struct pwm_device *pwm, struct pwm_state *state);
+
 As a consumer, don't rely on the output's state for a disabled PWM. If it's
 easily possible, drivers are supposed to emit the inactive state, but some
 drivers cannot. If you rely on getting the inactive state, use .duty_cycle=0,
@@ -57,13 +66,13 @@ If supported by the driver, the signal can be optimized, for example to improve
 EMI by phase shifting the individual channels of a chip.
 
 The pwm_config(), pwm_enable() and pwm_disable() functions are just wrappers
-around pwm_apply_state() and should not be used if the user wants to change
+around pwm_apply_might_sleep() and should not be used if the user wants to change
 several parameter at once. For example, if you see pwm_config() and
 pwm_{enable,disable}() calls in the same function, this probably means you
-should switch to pwm_apply_state().
+should switch to pwm_apply_might_sleep().
 
 The PWM user API also allows one to query the PWM state that was passed to the
-last invocation of pwm_apply_state() using pwm_get_state(). Note this is
+last invocation of pwm_apply_might_sleep() using pwm_get_state(). Note this is
 different to what the driver has actually implemented if the request cannot be
 satisfied exactly with the hardware in use. There is currently no way for
 consumers to get the actually implemented settings.
diff --git linux-libre-6.7-gnu/Documentation/driver-api/surface_aggregator/ssh.rst linux-libre-6.8-gnu/Documentation/driver-api/surface_aggregator/ssh.rst
index b955b673838b..58a757319931 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/surface_aggregator/ssh.rst
+++ linux-libre-6.8-gnu/Documentation/driver-api/surface_aggregator/ssh.rst
@@ -39,7 +39,7 @@ Note that the standard disclaimer for this subsystem also applies to this
 document: All of this has been reverse-engineered and may thus be erroneous
 and/or incomplete.
 
-All CRCs used in the following are two-byte ``crc_ccitt_false(0xffff, ...)``.
+All CRCs used in the following are two-byte ``crc_itu_t(0xffff, ...)``.
 All multi-byte values are little-endian, there is no implicit padding between
 values.
 
diff --git linux-libre-6.7-gnu/Documentation/driver-api/tee.rst linux-libre-6.8-gnu/Documentation/driver-api/tee.rst
new file mode 100644
index 000000000000..5eaeb8103988
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/driver-api/tee.rst
@@ -0,0 +1,66 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================
+TEE (Trusted Execution Environment) driver API
+===============================================
+
+Kernel provides a TEE bus infrastructure where a Trusted Application is
+represented as a device identified via Universally Unique Identifier (UUID) and
+client drivers register a table of supported device UUIDs.
+
+TEE bus infrastructure registers following APIs:
+
+match():
+  iterates over the client driver UUID table to find a corresponding
+  match for device UUID. If a match is found, then this particular device is
+  probed via corresponding probe API registered by the client driver. This
+  process happens whenever a device or a client driver is registered with TEE
+  bus.
+
+uevent():
+  notifies user-space (udev) whenever a new device is registered on
+  TEE bus for auto-loading of modularized client drivers.
+
+TEE bus device enumeration is specific to underlying TEE implementation, so it
+is left open for TEE drivers to provide corresponding implementation.
+
+Then TEE client driver can talk to a matched Trusted Application using APIs
+listed in include/linux/tee_drv.h.
+
+TEE client driver example
+-------------------------
+
+Suppose a TEE client driver needs to communicate with a Trusted Application
+having UUID: ``ac6a4085-0e82-4c33-bf98-8eb8e118b6c2``, so driver registration
+snippet would look like::
+
+	static const struct tee_client_device_id client_id_table[] = {
+		{UUID_INIT(0xac6a4085, 0x0e82, 0x4c33,
+			   0xbf, 0x98, 0x8e, 0xb8, 0xe1, 0x18, 0xb6, 0xc2)},
+		{}
+	};
+
+	MODULE_DEVICE_TABLE(tee, client_id_table);
+
+	static struct tee_client_driver client_driver = {
+		.id_table	= client_id_table,
+		.driver		= {
+			.name		= DRIVER_NAME,
+			.bus		= &tee_bus_type,
+			.probe		= client_probe,
+			.remove		= client_remove,
+		},
+	};
+
+	static int __init client_init(void)
+	{
+		return driver_register(&client_driver.driver);
+	}
+
+	static void __exit client_exit(void)
+	{
+		driver_unregister(&client_driver.driver);
+	}
+
+	module_init(client_init);
+	module_exit(client_exit);
diff --git linux-libre-6.7-gnu/Documentation/driver-api/wbrf.rst linux-libre-6.8-gnu/Documentation/driver-api/wbrf.rst
new file mode 100644
index 000000000000..f48bfa029813
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/driver-api/wbrf.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+=================================
+WBRF - Wifi Band RFI Mitigations
+=================================
+
+Due to electrical and mechanical constraints in certain platform designs
+there may be likely interference of relatively high-powered harmonics of
+the GPU memory clocks with local radio module frequency bands used by
+certain Wifi bands.
+
+To mitigate possible RFI interference producers can advertise the
+frequencies in use and consumers can use this information to avoid using
+these frequencies for sensitive features.
+
+When a platform is known to have this issue with any contained devices,
+the platform designer will advertise the availability of this feature via
+ACPI devices with a device specific method (_DSM).
+* Producers with this _DSM will be able to advertise the frequencies in use.
+* Consumers with this _DSM will be able to register for notifications of
+frequencies in use.
+
+Some general terms
+==================
+
+Producer: such component who can produce high-powered radio frequency
+Consumer: such component who can adjust its in-use frequency in
+response to the radio frequencies of other components to mitigate the
+possible RFI.
+
+To make the mechanism function, those producers should notify active use
+of their particular frequencies so that other consumers can make relative
+internal adjustments as necessary to avoid this resonance.
+
+ACPI interface
+==============
+
+Although initially used by for wifi + dGPU use cases, the ACPI interface
+can be scaled to any type of device that a platform designer discovers
+can cause interference.
+
+The GUID used for the _DSM is 7B7656CF-DC3D-4C1C-83E9-66E721DE3070.
+
+3 functions are available in this _DSM:
+
+* 0: discover # of functions available
+* 1: record RF bands in use
+* 2: retrieve RF bands in use
+
+Driver programming interface
+============================
+
+.. kernel-doc:: drivers/platform/x86/amd/wbrf.c
+
+Sample Usage
+=============
+
+The expected flow for the producers:
+1. During probe, call `acpi_amd_wbrf_supported_producer` to check if WBRF
+can be enabled for the device.
+2. On using some frequency band, call `acpi_amd_wbrf_add_remove` with 'add'
+param to get other consumers properly notified.
+3. Or on stopping using some frequency band, call
+`acpi_amd_wbrf_add_remove` with 'remove' param to get other consumers notified.
+
+The expected flow for the consumers:
+1. During probe, call `acpi_amd_wbrf_supported_consumer` to check if WBRF
+can be enabled for the device.
+2. Call `amd_wbrf_register_notifier` to register for notification
+of frequency band change(add or remove) from other producers.
+3. Call the `amd_wbrf_retrieve_freq_band` initally to retrieve
+current active frequency bands considering some producers may broadcast
+such information before the consumer is up.
+4. On receiving a notification for frequency band change, run
+`amd_wbrf_retrieve_freq_band` again to retrieve the latest
+active frequency bands.
+5. During driver cleanup, call `amd_wbrf_unregister_notifier` to
+unregister the notifier.
diff --git linux-libre-6.7-gnu/Documentation/fb/index.rst linux-libre-6.8-gnu/Documentation/fb/index.rst
index baf02393d8ee..33e3c49f8856 100644
--- linux-libre-6.7-gnu/Documentation/fb/index.rst
+++ linux-libre-6.8-gnu/Documentation/fb/index.rst
@@ -19,7 +19,6 @@ Frame Buffer
     framebuffer
     gxfb
     intel810
-    intelfb
     internals
     lxfb
     matroxfb
diff --git linux-libre-6.7-gnu/Documentation/fb/intelfb.rst linux-libre-6.8-gnu/Documentation/fb/intelfb.rst
deleted file mode 100644
index e2d0903f4efb..000000000000
--- linux-libre-6.7-gnu/Documentation/fb/intelfb.rst
+++ /dev/null
@@ -1,155 +0,0 @@
-=============================================================
-Intel 830M/845G/852GM/855GM/865G/915G/945G Framebuffer driver
-=============================================================
-
-A. Introduction
-===============
-
-This is a framebuffer driver for various Intel 8xx/9xx compatible
-graphics devices.  These would include:
-
-	- Intel 830M
-	- Intel 845G
-	- Intel 852GM
-	- Intel 855GM
-	- Intel 865G
-	- Intel 915G
-	- Intel 915GM
-	- Intel 945G
-	- Intel 945GM
-	- Intel 945GME
-	- Intel 965G
-	- Intel 965GM
-
-B.  List of available options
-=============================
-
-   a. "video=intelfb"
-	enables the intelfb driver
-
-	Recommendation: required
-
-   b. "mode=<xres>x<yres>[-<bpp>][@<refresh>]"
-	select mode
-
-	Recommendation: user preference
-	(default = 1024x768-32@70)
-
-   c. "vram=<value>"
-	select amount of system RAM in MB to allocate for the video memory
-	if not enough RAM was already allocated by the BIOS.
-
-	Recommendation: 1 - 4 MB.
-	(default = 4 MB)
-
-   d. "voffset=<value>"
-	select at what offset in MB of the logical memory to allocate the
-	framebuffer memory.  The intent is to avoid the memory blocks
-	used by standard graphics applications (XFree86). Depending on your
-	usage, adjust the value up or down, (0 for maximum usage, 63/127 MB
-	for the least amount).  Note, an arbitrary setting may conflict
-	with XFree86.
-
-	Recommendation: do not set
-	(default = 48 MB)
-
-   e. "accel"
-	enable text acceleration.  This can be enabled/reenabled anytime
-	by using 'fbset -accel true/false'.
-
-	Recommendation: enable
-	(default = set)
-
-   f. "hwcursor"
-	enable cursor acceleration.
-
-	Recommendation: enable
-	(default = set)
-
-   g. "mtrr"
-	enable MTRR.  This allows data transfers to the framebuffer memory
-	to occur in bursts which can significantly increase performance.
-	Not very helpful with the intel chips because of 'shared memory'.
-
-	Recommendation: set
-	(default = set)
-
-   h. "fixed"
-	disable mode switching.
-
-	Recommendation: do not set
-	(default = not set)
-
-   The binary parameters can be unset with a "no" prefix, example "noaccel".
-   The default parameter (not named) is the mode.
-
-C. Kernel booting
-=================
-
-Separate each option/option-pair by commas (,) and the option from its value
-with an equals sign (=) as in the following::
-
-	video=intelfb:option1,option2=value2
-
-Sample Usage
-------------
-
-In /etc/lilo.conf, add the line::
-
-	append="video=intelfb:mode=800x600-32@75,accel,hwcursor,vram=8"
-
-This will initialize the framebuffer to 800x600 at 32bpp and 75Hz. The
-framebuffer will use 8 MB of System RAM. hw acceleration of text and cursor
-will be enabled.
-
-Remarks
--------
-
-If setting this parameter doesn't work (you stay in a 80x25 text-mode),
-you might need to set the "vga=<mode>" parameter too - see vesafb.txt
-in this directory.
-
-
-D.  Module options
-==================
-
-The module parameters are essentially similar to the kernel
-parameters. The main difference is that you need to include a Boolean value
-(1 for TRUE, and 0 for FALSE) for those options which don't need a value.
-
-Example, to enable MTRR, include "mtrr=1".
-
-Sample Usage
-------------
-
-Using the same setup as described above, load the module like this::
-
-	modprobe intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
-
-Or just add the following to a configuration file in /etc/modprobe.d/::
-
-	options intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
-
-and just do a::
-
-	modprobe intelfb
-
-
-E.  Acknowledgment:
-===================
-
-	1.  Geert Uytterhoeven - his excellent howto and the virtual
-	    framebuffer driver code made this possible.
-
-	2.  Jeff Hartmann for his agpgart code.
-
-	3.  David Dawes for his original kernel 2.4 code.
-
-	4.  The X developers.  Insights were provided just by reading the
-	    XFree86 source code.
-
-	5.  Antonino A. Daplas for his inspiring i810fb driver.
-
-	6.  Andrew Morton for his kernel patches maintenance.
-
-Sylvain
diff --git linux-libre-6.7-gnu/Documentation/features/vm/TLB/arch-support.txt linux-libre-6.8-gnu/Documentation/features/vm/TLB/arch-support.txt
index 8fd22073a847..d222bd3ee749 100644
--- linux-libre-6.7-gnu/Documentation/features/vm/TLB/arch-support.txt
+++ linux-libre-6.8-gnu/Documentation/features/vm/TLB/arch-support.txt
@@ -20,7 +20,7 @@
     |    openrisc: |  ..  |
     |      parisc: | TODO |
     |     powerpc: | TODO |
-    |       riscv: | TODO |
+    |       riscv: |  ok  |
     |        s390: | TODO |
     |          sh: | TODO |
     |       sparc: | TODO |
diff --git linux-libre-6.7-gnu/Documentation/filesystems/directory-locking.rst linux-libre-6.8-gnu/Documentation/filesystems/directory-locking.rst
index dccd61c7c5c3..05ea387bc9fb 100644
--- linux-libre-6.7-gnu/Documentation/filesystems/directory-locking.rst
+++ linux-libre-6.8-gnu/Documentation/filesystems/directory-locking.rst
@@ -11,129 +11,268 @@ When taking the i_rwsem on multiple non-directory objects, we
 always acquire the locks in order by increasing address.  We'll call
 that "inode pointer" order in the following.
 
-For our purposes all operations fall in 5 classes:
 
-1) read access.  Locking rules: caller locks directory we are accessing.
-The lock is taken shared.
+Primitives
+==========
 
-2) object creation.  Locking rules: same as above, but the lock is taken
-exclusive.
+For our purposes all operations fall in 6 classes:
 
-3) object removal.  Locking rules: caller locks parent, finds victim,
-locks victim and calls the method.  Locks are exclusive.
+1. read access.  Locking rules:
 
-4) rename() that is _not_ cross-directory.  Locking rules: caller locks the
-parent and finds source and target.  We lock both (provided they exist).  If we
-need to lock two inodes of different type (dir vs non-dir), we lock directory
-first.  If we need to lock two inodes of the same type, lock them in inode
-pointer order.  Then call the method.  All locks are exclusive.
-NB: we might get away with locking the source (and target in exchange
-case) shared.
+	* lock the directory we are accessing (shared)
 
-5) link creation.  Locking rules:
+2. object creation.  Locking rules:
 
-	* lock parent
-	* check that source is not a directory
-	* lock source
-	* call the method.
+	* lock the directory we are accessing (exclusive)
 
-All locks are exclusive.
+3. object removal.  Locking rules:
 
-6) cross-directory rename.  The trickiest in the whole bunch.  Locking
-rules:
+	* lock the parent (exclusive)
+	* find the victim
+	* lock the victim (exclusive)
 
-	* lock the filesystem
-	* lock parents in "ancestors first" order. If one is not ancestor of
-	  the other, lock them in inode pointer order.
-	* find source and target.
-	* if old parent is equal to or is a descendent of target
-	  fail with -ENOTEMPTY
-	* if new parent is equal to or is a descendent of source
-	  fail with -ELOOP
-	* Lock both the source and the target provided they exist. If we
-	  need to lock two inodes of different type (dir vs non-dir), we lock
-	  the directory first. If we need to lock two inodes of the same type,
-	  lock them in inode pointer order.
-	* call the method.
-
-All ->i_rwsem are taken exclusive.  Again, we might get away with locking
-the source (and target in exchange case) shared.
-
-The rules above obviously guarantee that all directories that are going to be
-read, modified or removed by method will be locked by caller.
+4. link creation.  Locking rules:
+
+	* lock the parent (exclusive)
+	* check that the source is not a directory
+	* lock the source (exclusive; probably could be weakened to shared)
+
+5. rename that is _not_ cross-directory.  Locking rules:
+
+	* lock the parent (exclusive)
+	* find the source and target
+	* decide which of the source and target need to be locked.
+	  The source needs to be locked if it's a non-directory, target - if it's
+	  a non-directory or about to be removed.
+	* take the locks that need to be taken (exlusive), in inode pointer order
+	  if need to take both (that can happen only when both source and target
+	  are non-directories - the source because it wouldn't need to be locked
+	  otherwise and the target because mixing directory and non-directory is
+	  allowed only with RENAME_EXCHANGE, and that won't be removing the target).
 
+6. cross-directory rename.  The trickiest in the whole bunch.  Locking rules:
+
+	* lock the filesystem
+	* if the parents don't have a common ancestor, fail the operation.
+	* lock the parents in "ancestors first" order (exclusive). If neither is an
+	  ancestor of the other, lock the parent of source first.
+	* find the source and target.
+	* verify that the source is not a descendent of the target and
+	  target is not a descendent of source; fail the operation otherwise.
+	* lock the subdirectories involved (exclusive), source before target.
+	* lock the non-directories involved (exclusive), in inode pointer order.
+
+The rules above obviously guarantee that all directories that are going
+to be read, modified or removed by method will be locked by the caller.
+
+
+Splicing
+========
+
+There is one more thing to consider - splicing.  It's not an operation
+in its own right; it may happen as part of lookup.  We speak of the
+operations on directory trees, but we obviously do not have the full
+picture of those - especially for network filesystems.  What we have
+is a bunch of subtrees visible in dcache and locking happens on those.
+Trees grow as we do operations; memory pressure prunes them.  Normally
+that's not a problem, but there is a nasty twist - what should we do
+when one growing tree reaches the root of another?  That can happen in
+several scenarios, starting from "somebody mounted two nested subtrees
+from the same NFS4 server and doing lookups in one of them has reached
+the root of another"; there's also open-by-fhandle stuff, and there's a
+possibility that directory we see in one place gets moved by the server
+to another and we run into it when we do a lookup.
+
+For a lot of reasons we want to have the same directory present in dcache
+only once.  Multiple aliases are not allowed.  So when lookup runs into
+a subdirectory that already has an alias, something needs to be done with
+dcache trees.  Lookup is already holding the parent locked.  If alias is
+a root of separate tree, it gets attached to the directory we are doing a
+lookup in, under the name we'd been looking for.  If the alias is already
+a child of the directory we are looking in, it changes name to the one
+we'd been looking for.  No extra locking is involved in these two cases.
+However, if it's a child of some other directory, the things get trickier.
+First of all, we verify that it is *not* an ancestor of our directory
+and fail the lookup if it is.  Then we try to lock the filesystem and the
+current parent of the alias.  If either trylock fails, we fail the lookup.
+If trylocks succeed, we detach the alias from its current parent and
+attach to our directory, under the name we are looking for.
+
+Note that splicing does *not* involve any modification of the filesystem;
+all we change is the view in dcache.  Moreover, holding a directory locked
+exclusive prevents such changes involving its children and holding the
+filesystem lock prevents any changes of tree topology, other than having a
+root of one tree becoming a child of directory in another.  In particular,
+if two dentries have been found to have a common ancestor after taking
+the filesystem lock, their relationship will remain unchanged until
+the lock is dropped.  So from the directory operations' point of view
+splicing is almost irrelevant - the only place where it matters is one
+step in cross-directory renames; we need to be careful when checking if
+parents have a common ancestor.
+
+
+Multiple-filesystem stuff
+=========================
+
+For some filesystems a method can involve a directory operation on
+another filesystem; it may be ecryptfs doing operation in the underlying
+filesystem, overlayfs doing something to the layers, network filesystem
+using a local one as a cache, etc.  In all such cases the operations
+on other filesystems must follow the same locking rules.  Moreover, "a
+directory operation on this filesystem might involve directory operations
+on that filesystem" should be an asymmetric relation (or, if you will,
+it should be possible to rank the filesystems so that directory operation
+on a filesystem could trigger directory operations only on higher-ranked
+ones - in these terms overlayfs ranks lower than its layers, network
+filesystem ranks lower than whatever it caches on, etc.)
+
+
+Deadlock avoidance
+==================
 
 If no directory is its own ancestor, the scheme above is deadlock-free.
 
 Proof:
 
-	First of all, at any moment we have a linear ordering of the
-	objects - A < B iff (A is an ancestor of B) or (B is not an ancestor
-        of A and ptr(A) < ptr(B)).
-
-	That ordering can change.  However, the following is true:
-
-(1) if object removal or non-cross-directory rename holds lock on A and
-    attempts to acquire lock on B, A will remain the parent of B until we
-    acquire the lock on B.  (Proof: only cross-directory rename can change
-    the parent of object and it would have to lock the parent).
-
-(2) if cross-directory rename holds the lock on filesystem, order will not
-    change until rename acquires all locks.  (Proof: other cross-directory
-    renames will be blocked on filesystem lock and we don't start changing
-    the order until we had acquired all locks).
-
-(3) locks on non-directory objects are acquired only after locks on
-    directory objects, and are acquired in inode pointer order.
-    (Proof: all operations but renames take lock on at most one
-    non-directory object, except renames, which take locks on source and
-    target in inode pointer order in the case they are not directories.)
-
-Now consider the minimal deadlock.  Each process is blocked on
-attempt to acquire some lock and already holds at least one lock.  Let's
-consider the set of contended locks.  First of all, filesystem lock is
-not contended, since any process blocked on it is not holding any locks.
-Thus all processes are blocked on ->i_rwsem.
-
-By (3), any process holding a non-directory lock can only be
-waiting on another non-directory lock with a larger address.  Therefore
-the process holding the "largest" such lock can always make progress, and
-non-directory objects are not included in the set of contended locks.
-
-Thus link creation can't be a part of deadlock - it can't be
-blocked on source and it means that it doesn't hold any locks.
-
-Any contended object is either held by cross-directory rename or
-has a child that is also contended.  Indeed, suppose that it is held by
-operation other than cross-directory rename.  Then the lock this operation
-is blocked on belongs to child of that object due to (1).
-
-It means that one of the operations is cross-directory rename.
-Otherwise the set of contended objects would be infinite - each of them
-would have a contended child and we had assumed that no object is its
-own descendent.  Moreover, there is exactly one cross-directory rename
-(see above).
-
-Consider the object blocking the cross-directory rename.  One
-of its descendents is locked by cross-directory rename (otherwise we
-would again have an infinite set of contended objects).  But that
-means that cross-directory rename is taking locks out of order.  Due
-to (2) the order hadn't changed since we had acquired filesystem lock.
-But locking rules for cross-directory rename guarantee that we do not
-try to acquire lock on descendent before the lock on ancestor.
-Contradiction.  I.e.  deadlock is impossible.  Q.E.D.
-
+There is a ranking on the locks, such that all primitives take
+them in order of non-decreasing rank.  Namely,
+
+  * rank ->i_rwsem of non-directories on given filesystem in inode pointer
+    order.
+  * put ->i_rwsem of all directories on a filesystem at the same rank,
+    lower than ->i_rwsem of any non-directory on the same filesystem.
+  * put ->s_vfs_rename_mutex at rank lower than that of any ->i_rwsem
+    on the same filesystem.
+  * among the locks on different filesystems use the relative
+    rank of those filesystems.
+
+For example, if we have NFS filesystem caching on a local one, we have
+
+  1. ->s_vfs_rename_mutex of NFS filesystem
+  2. ->i_rwsem of directories on that NFS filesystem, same rank for all
+  3. ->i_rwsem of non-directories on that filesystem, in order of
+     increasing address of inode
+  4. ->s_vfs_rename_mutex of local filesystem
+  5. ->i_rwsem of directories on the local filesystem, same rank for all
+  6. ->i_rwsem of non-directories on local filesystem, in order of
+     increasing address of inode.
+
+It's easy to verify that operations never take a lock with rank
+lower than that of an already held lock.
+
+Suppose deadlocks are possible.  Consider the minimal deadlocked
+set of threads.  It is a cycle of several threads, each blocked on a lock
+held by the next thread in the cycle.
+
+Since the locking order is consistent with the ranking, all
+contended locks in the minimal deadlock will be of the same rank,
+i.e. they all will be ->i_rwsem of directories on the same filesystem.
+Moreover, without loss of generality we can assume that all operations
+are done directly to that filesystem and none of them has actually
+reached the method call.
+
+In other words, we have a cycle of threads, T1,..., Tn,
+and the same number of directories (D1,...,Dn) such that
+
+	T1 is blocked on D1 which is held by T2
+
+	T2 is blocked on D2 which is held by T3
+
+	...
+
+	Tn is blocked on Dn which is held by T1.
+
+Each operation in the minimal cycle must have locked at least
+one directory and blocked on attempt to lock another.  That leaves
+only 3 possible operations: directory removal (locks parent, then
+child), same-directory rename killing a subdirectory (ditto) and
+cross-directory rename of some sort.
+
+There must be a cross-directory rename in the set; indeed,
+if all operations had been of the "lock parent, then child" sort
+we would have Dn a parent of D1, which is a parent of D2, which is
+a parent of D3, ..., which is a parent of Dn.  Relationships couldn't
+have changed since the moment directory locks had been acquired,
+so they would all hold simultaneously at the deadlock time and
+we would have a loop.
+
+Since all operations are on the same filesystem, there can't be
+more than one cross-directory rename among them.  Without loss of
+generality we can assume that T1 is the one doing a cross-directory
+rename and everything else is of the "lock parent, then child" sort.
+
+In other words, we have a cross-directory rename that locked
+Dn and blocked on attempt to lock D1, which is a parent of D2, which is
+a parent of D3, ..., which is a parent of Dn.  Relationships between
+D1,...,Dn all hold simultaneously at the deadlock time.  Moreover,
+cross-directory rename does not get to locking any directories until it
+has acquired filesystem lock and verified that directories involved have
+a common ancestor, which guarantees that ancestry relationships between
+all of them had been stable.
+
+Consider the order in which directories are locked by the
+cross-directory rename; parents first, then possibly their children.
+Dn and D1 would have to be among those, with Dn locked before D1.
+Which pair could it be?
+
+It can't be the parents - indeed, since D1 is an ancestor of Dn,
+it would be the first parent to be locked.  Therefore at least one of the
+children must be involved and thus neither of them could be a descendent
+of another - otherwise the operation would not have progressed past
+locking the parents.
+
+It can't be a parent and its child; otherwise we would've had
+a loop, since the parents are locked before the children, so the parent
+would have to be a descendent of its child.
+
+It can't be a parent and a child of another parent either.
+Otherwise the child of the parent in question would've been a descendent
+of another child.
+
+That leaves only one possibility - namely, both Dn and D1 are
+among the children, in some order.  But that is also impossible, since
+neither of the children is a descendent of another.
+
+That concludes the proof, since the set of operations with the
+properties requiered for a minimal deadlock can not exist.
+
+Note that the check for having a common ancestor in cross-directory
+rename is crucial - without it a deadlock would be possible.  Indeed,
+suppose the parents are initially in different trees; we would lock the
+parent of source, then try to lock the parent of target, only to have
+an unrelated lookup splice a distant ancestor of source to some distant
+descendent of the parent of target.   At that point we have cross-directory
+rename holding the lock on parent of source and trying to lock its
+distant ancestor.  Add a bunch of rmdir() attempts on all directories
+in between (all of those would fail with -ENOTEMPTY, had they ever gotten
+the locks) and voila - we have a deadlock.
+
+Loop avoidance
+==============
 
 These operations are guaranteed to avoid loop creation.  Indeed,
 the only operation that could introduce loops is cross-directory rename.
-Since the only new (parent, child) pair added by rename() is (new parent,
-source), such loop would have to contain these objects and the rest of it
-would have to exist before rename().  I.e. at the moment of loop creation
-rename() responsible for that would be holding filesystem lock and new parent
-would have to be equal to or a descendent of source.  But that means that
-new parent had been equal to or a descendent of source since the moment when
-we had acquired filesystem lock and rename() would fail with -ELOOP in that
-case.
+Suppose after the operation there is a loop; since there hadn't been such
+loops before the operation, at least on of the nodes in that loop must've
+had its parent changed.  In other words, the loop must be passing through
+the source or, in case of exchange, possibly the target.
+
+Since the operation has succeeded, neither source nor target could have
+been ancestors of each other.  Therefore the chain of ancestors starting
+in the parent of source could not have passed through the target and
+vice versa.  On the other hand, the chain of ancestors of any node could
+not have passed through the node itself, or we would've had a loop before
+the operation.  But everything other than source and target has kept
+the parent after the operation, so the operation does not change the
+chains of ancestors of (ex-)parents of source and target.  In particular,
+those chains must end after a finite number of steps.
+
+Now consider the loop created by the operation.  It passes through either
+source or target; the next node in the loop would be the ex-parent of
+target or source resp.  After that the loop would follow the chain of
+ancestors of that parent.  But as we have just shown, that chain must
+end after a finite number of steps, which means that it can't be a part
+of any loop.  Q.E.D.
 
 While this locking scheme works for arbitrary DAGs, it relies on
 ability to check that directory is a descendent of another object.  Current
diff --git linux-libre-6.7-gnu/Documentation/filesystems/fscrypt.rst linux-libre-6.8-gnu/Documentation/filesystems/fscrypt.rst
index 1b84f818e574..e86b886b64d0 100644
--- linux-libre-6.7-gnu/Documentation/filesystems/fscrypt.rst
+++ linux-libre-6.8-gnu/Documentation/filesystems/fscrypt.rst
@@ -31,15 +31,15 @@ However, except for filenames, fscrypt does not encrypt filesystem
 metadata.
 
 Unlike eCryptfs, which is a stacked filesystem, fscrypt is integrated
-directly into supported filesystems --- currently ext4, F2FS, and
-UBIFS.  This allows encrypted files to be read and written without
-caching both the decrypted and encrypted pages in the pagecache,
-thereby nearly halving the memory used and bringing it in line with
-unencrypted files.  Similarly, half as many dentries and inodes are
-needed.  eCryptfs also limits encrypted filenames to 143 bytes,
-causing application compatibility issues; fscrypt allows the full 255
-bytes (NAME_MAX).  Finally, unlike eCryptfs, the fscrypt API can be
-used by unprivileged users, with no need to mount anything.
+directly into supported filesystems --- currently ext4, F2FS, UBIFS,
+and CephFS.  This allows encrypted files to be read and written
+without caching both the decrypted and encrypted pages in the
+pagecache, thereby nearly halving the memory used and bringing it in
+line with unencrypted files.  Similarly, half as many dentries and
+inodes are needed.  eCryptfs also limits encrypted filenames to 143
+bytes, causing application compatibility issues; fscrypt allows the
+full 255 bytes (NAME_MAX).  Finally, unlike eCryptfs, the fscrypt API
+can be used by unprivileged users, with no need to mount anything.
 
 fscrypt does not support encrypting files in-place.  Instead, it
 supports marking an empty directory as encrypted.  Then, after
@@ -1382,7 +1382,8 @@ directory.)  These structs are defined as follows::
             u8 contents_encryption_mode;
             u8 filenames_encryption_mode;
             u8 flags;
-            u8 __reserved[4];
+            u8 log2_data_unit_size;
+            u8 __reserved[3];
             u8 master_key_identifier[FSCRYPT_KEY_IDENTIFIER_SIZE];
             u8 nonce[FSCRYPT_FILE_NONCE_SIZE];
     };
diff --git linux-libre-6.7-gnu/Documentation/filesystems/index.rst linux-libre-6.8-gnu/Documentation/filesystems/index.rst
index 09cade7eaefc..e18bc5ae3b35 100644
--- linux-libre-6.7-gnu/Documentation/filesystems/index.rst
+++ linux-libre-6.8-gnu/Documentation/filesystems/index.rst
@@ -121,8 +121,5 @@ Documentation for filesystem implementations.
    udf
    virtiofs
    vfat
-   xfs-delayed-logging-design
-   xfs-maintainer-entry-profile
-   xfs-self-describing-metadata
-   xfs-online-fsck-design
+   xfs/index
    zonefs
diff --git linux-libre-6.7-gnu/Documentation/filesystems/locking.rst linux-libre-6.8-gnu/Documentation/filesystems/locking.rst
index 7be2900806c8..d5bf4b6b7509 100644
--- linux-libre-6.7-gnu/Documentation/filesystems/locking.rst
+++ linux-libre-6.8-gnu/Documentation/filesystems/locking.rst
@@ -101,7 +101,7 @@ symlink:	exclusive
 mkdir:		exclusive
 unlink:		exclusive (both)
 rmdir:		exclusive (both)(see below)
-rename:		exclusive (all)	(see below)
+rename:		exclusive (both parents, some children)	(see below)
 readlink:	no
 get_link:	no
 setattr:	exclusive
@@ -123,6 +123,9 @@ get_offset_ctx  no
 	Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_rwsem
 	exclusive on victim.
 	cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.
+	->unlink() and ->rename() have ->i_rwsem exclusive on all non-directories
+	involved.
+	->rename() has ->i_rwsem exclusive on any subdirectory that changes parent.
 
 See Documentation/filesystems/directory-locking.rst for more detailed discussion
 of the locking scheme for directory operations.
@@ -261,7 +264,7 @@ prototypes::
 			struct folio *src, enum migrate_mode);
 	int (*launder_folio)(struct folio *);
 	bool (*is_partially_uptodate)(struct folio *, size_t from, size_t count);
-	int (*error_remove_page)(struct address_space *, struct page *);
+	int (*error_remove_folio)(struct address_space *, struct folio *);
 	int (*swap_activate)(struct swap_info_struct *sis, struct file *f, sector_t *span)
 	int (*swap_deactivate)(struct file *);
 	int (*swap_rw)(struct kiocb *iocb, struct iov_iter *iter);
@@ -287,7 +290,7 @@ direct_IO:
 migrate_folio:		yes (both)
 launder_folio:		yes
 is_partially_uptodate:	yes
-error_remove_page:	yes
+error_remove_folio:	yes
 swap_activate:		no
 swap_deactivate:	no
 swap_rw:		yes, unlocks
diff --git linux-libre-6.7-gnu/Documentation/filesystems/netfs_library.rst linux-libre-6.8-gnu/Documentation/filesystems/netfs_library.rst
index 48b95d04f72d..4cc657d743f7 100644
--- linux-libre-6.7-gnu/Documentation/filesystems/netfs_library.rst
+++ linux-libre-6.8-gnu/Documentation/filesystems/netfs_library.rst
@@ -295,7 +295,6 @@ through which it can issue requests and negotiate::
 	struct netfs_request_ops {
 		void (*init_request)(struct netfs_io_request *rreq, struct file *file);
 		void (*free_request)(struct netfs_io_request *rreq);
-		int (*begin_cache_operation)(struct netfs_io_request *rreq);
 		void (*expand_readahead)(struct netfs_io_request *rreq);
 		bool (*clamp_length)(struct netfs_io_subrequest *subreq);
 		void (*issue_read)(struct netfs_io_subrequest *subreq);
@@ -317,20 +316,6 @@ The operations are as follows:
    [Optional] This is called as the request is being deallocated so that the
    filesystem can clean up any state it has attached there.
 
- * ``begin_cache_operation()``
-
-   [Optional] This is called to ask the network filesystem to call into the
-   cache (if present) to initialise the caching state for this read.  The netfs
-   library module cannot access the cache directly, so the cache should call
-   something like fscache_begin_read_operation() to do this.
-
-   The cache gets to store its state in ->cache_resources and must set a table
-   of operations of its own there (though of a different type).
-
-   This should return 0 on success and an error code otherwise.  If an error is
-   reported, the operation may proceed anyway, just without local caching (only
-   out of memory and interruption errors cause failure here).
-
  * ``expand_readahead()``
 
    [Optional] This is called to allow the filesystem to expand the size of a
@@ -460,14 +445,14 @@ When implementing a local cache to be used by the read helpers, two things are
 required: some way for the network filesystem to initialise the caching for a
 read request and a table of operations for the helpers to call.
 
-The network filesystem's ->begin_cache_operation() method is called to set up a
-cache and this must call into the cache to do the work.  If using fscache, for
-example, the cache would call::
+To begin a cache operation on an fscache object, the following function is
+called::
 
 	int fscache_begin_read_operation(struct netfs_io_request *rreq,
 					 struct fscache_cookie *cookie);
 
-passing in the request pointer and the cookie corresponding to the file.
+passing in the request pointer and the cookie corresponding to the file.  This
+fills in the cache resources mentioned below.
 
 The netfs_io_request object contains a place for the cache to hang its
 state::
diff --git linux-libre-6.7-gnu/Documentation/filesystems/overlayfs.rst linux-libre-6.8-gnu/Documentation/filesystems/overlayfs.rst
index 0407f361f32a..165514401441 100644
--- linux-libre-6.7-gnu/Documentation/filesystems/overlayfs.rst
+++ linux-libre-6.8-gnu/Documentation/filesystems/overlayfs.rst
@@ -39,7 +39,7 @@ objects in the original filesystem.
 On 64bit systems, even if all overlay layers are not on the same
 underlying filesystem, the same compliant behavior could be achieved
 with the "xino" feature.  The "xino" feature composes a unique object
-identifier from the real object st_ino and an underlying fsid index.
+identifier from the real object st_ino and an underlying fsid number.
 The "xino" feature uses the high inode number bits for fsid, because the
 underlying filesystems rarely use the high inode number bits.  In case
 the underlying inode number does overflow into the high xino bits, overlay
@@ -118,7 +118,7 @@ Where both upper and lower objects are directories, a merged directory
 is formed.
 
 At mount time, the two directories given as mount options "lowerdir" and
-"upperdir" are combined into a merged directory:
+"upperdir" are combined into a merged directory::
 
   mount -t overlay overlay -olowerdir=/lower,upperdir=/upper,\
   workdir=/work /merged
@@ -145,7 +145,9 @@ filesystem, an overlay filesystem needs to record in the upper filesystem
 that files have been removed.  This is done using whiteouts and opaque
 directories (non-directories are always opaque).
 
-A whiteout is created as a character device with 0/0 device number.
+A whiteout is created as a character device with 0/0 device number or
+as a zero-size regular file with the xattr "trusted.overlay.whiteout".
+
 When a whiteout is found in the upper level of a merged directory, any
 matching name in the lower level is ignored, and the whiteout itself
 is also hidden.
@@ -154,6 +156,13 @@ A directory is made opaque by setting the xattr "trusted.overlay.opaque"
 to "y".  Where the upper filesystem contains an opaque directory, any
 directory in the lower filesystem with the same name is ignored.
 
+An opaque directory should not conntain any whiteouts, because they do not
+serve any purpose.  A merge directory containing regular files with the xattr
+"trusted.overlay.whiteout", should be additionally marked by setting the xattr
+"trusted.overlay.opaque" to "x" on the merge directory itself.
+This is needed to avoid the overhead of checking the "trusted.overlay.whiteout"
+on all entries during readdir in the common case.
+
 readdir
 -------
 
@@ -172,12 +181,12 @@ directory is being read.  This is unlikely to be noticed by many
 programs.
 
 seek offsets are assigned sequentially when the directories are read.
-Thus if
+Thus if:
 
-  - read part of a directory
-  - remember an offset, and close the directory
-  - re-open the directory some time later
-  - seek to the remembered offset
+ - read part of a directory
+ - remember an offset, and close the directory
+ - re-open the directory some time later
+ - seek to the remembered offset
 
 there may be little correlation between the old and new locations in
 the list of filenames, particularly if anything has changed in the
@@ -290,9 +299,9 @@ Permission checking in the overlay filesystem follows these principles:
  2) task creating the overlay mount MUST NOT gain additional privileges
 
  3) non-mounting task MAY gain additional privileges through the overlay,
- compared to direct access on underlying lower or upper filesystems
+    compared to direct access on underlying lower or upper filesystems
 
-This is achieved by performing two permission checks on each access
+This is achieved by performing two permission checks on each access:
 
  a) check if current task is allowed access based on local DAC (owner,
     group, mode and posix acl), as well as MAC checks
@@ -311,11 +320,11 @@ to create setups where the consistency rule (1) does not hold; normally,
 however, the mounting task will have sufficient privileges to perform all
 operations.
 
-Another way to demonstrate this model is drawing parallels between
+Another way to demonstrate this model is drawing parallels between::
 
   mount -t overlay overlay -olowerdir=/lower,upperdir=/upper,... /merged
 
-and
+and::
 
   cp -a /lower /upper
   mount --bind /upper /merged
@@ -328,7 +337,7 @@ Multiple lower layers
 ---------------------
 
 Multiple lower layers can now be given using the colon (":") as a
-separator character between the directory names.  For example:
+separator character between the directory names.  For example::
 
   mount -t overlay overlay -olowerdir=/lower1:/lower2:/lower3 /merged
 
@@ -340,13 +349,13 @@ rightmost one and going left.  In the above example lower1 will be the
 top, lower2 the middle and lower3 the bottom layer.
 
 Note: directory names containing colons can be provided as lower layer by
-escaping the colons with a single backslash.  For example:
+escaping the colons with a single backslash.  For example::
 
   mount -t overlay overlay -olowerdir=/a\:lower\:\:dir /merged
 
 Since kernel version v6.8, directory names containing colons can also
 be configured as lower layer using the "lowerdir+" mount options and the
-fsconfig syscall from new mount api.  For example:
+fsconfig syscall from new mount api.  For example::
 
   fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/a:lower::dir", 0);
 
@@ -356,7 +365,7 @@ as an octal characters (\072) when displayed in /proc/self/mountinfo.
 Metadata only copy up
 ---------------------
 
-When metadata only copy up feature is enabled, overlayfs will only copy
+When the "metacopy" feature is enabled, overlayfs will only copy
 up metadata (as opposed to whole file), when a metadata specific operation
 like chown/chmod is performed. Full file will be copied up later when
 file is opened for WRITE operation.
@@ -405,7 +414,7 @@ A normal lower layer is not allowed to be below a data-only layer, so single
 colon separators are not allowed to the right of double colon ("::") separators.
 
 
-For example:
+For example::
 
   mount -t overlay overlay -olowerdir=/l1:/l2:/l3::/do1::/do2 /merged
 
@@ -419,7 +428,7 @@ to the absolute path of the "lower data" file in the "data-only" lower layer.
 
 Since kernel version v6.8, "data-only" lower layers can also be added using
 the "datadir+" mount options and the fsconfig syscall from new mount api.
-For example:
+For example::
 
   fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l1", 0);
   fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l2", 0);
@@ -429,7 +438,7 @@ For example:
 
 
 fs-verity support
-----------------------
+-----------------
 
 During metadata copy up of a lower file, if the source file has
 fs-verity enabled and overlay verity support is enabled, then the
@@ -492,27 +501,27 @@ though it will not result in a crash or deadlock.
 
 Mounting an overlay using an upper layer path, where the upper layer path
 was previously used by another mounted overlay in combination with a
-different lower layer path, is allowed, unless the "inodes index" feature
-or "metadata only copy up" feature is enabled.
+different lower layer path, is allowed, unless the "index" or "metacopy"
+features are enabled.
 
-With the "inodes index" feature, on the first time mount, an NFS file
+With the "index" feature, on the first time mount, an NFS file
 handle of the lower layer root directory, along with the UUID of the lower
 filesystem, are encoded and stored in the "trusted.overlay.origin" extended
 attribute on the upper layer root directory.  On subsequent mount attempts,
 the lower root directory file handle and lower filesystem UUID are compared
 to the stored origin in upper root directory.  On failure to verify the
 lower root origin, mount will fail with ESTALE.  An overlayfs mount with
-"inodes index" enabled will fail with EOPNOTSUPP if the lower filesystem
+"index" enabled will fail with EOPNOTSUPP if the lower filesystem
 does not support NFS export, lower filesystem does not have a valid UUID or
 if the upper filesystem does not support extended attributes.
 
-For "metadata only copy up" feature there is no verification mechanism at
+For the "metacopy" feature, there is no verification mechanism at
 mount time. So if same upper is mounted with different set of lower, mount
 probably will succeed but expect the unexpected later on. So don't do it.
 
 It is quite a common practice to copy overlay layers to a different
 directory tree on the same or different underlying filesystem, and even
-to a different machine.  With the "inodes index" feature, trying to mount
+to a different machine.  With the "index" feature, trying to mount
 the copied layers will fail the verification of the lower root file handle.
 
 Nesting overlayfs mounts
@@ -534,8 +543,9 @@ A lower dir with a regular whiteout will always be handled by the overlayfs
 mount, so to support storing an effective whiteout file in an overlayfs mount an
 alternative form of whiteout is supported. This form is a regular, zero-size
 file with the "overlay.whiteout" xattr set, inside a directory with the
-"overlay.whiteouts" xattr set. Such whiteouts are never created by overlayfs,
-but can be used by userspace tools (like containers) that generate lower layers.
+"overlay.opaque" xattr set to "x" (see `whiteouts and opaque directories`_).
+These alternative whiteouts are never created by overlayfs, but can be used by
+userspace tools (like containers) that generate lower layers.
 These alternative whiteouts can be escaped using the standard xattr escape
 mechanism in order to properly nest to any depth.
 
@@ -547,20 +557,21 @@ filesystem.
 
 This is the list of cases that overlayfs doesn't currently handle:
 
-a) POSIX mandates updating st_atime for reads.  This is currently not
-done in the case when the file resides on a lower layer.
+ a) POSIX mandates updating st_atime for reads.  This is currently not
+    done in the case when the file resides on a lower layer.
 
-b) If a file residing on a lower layer is opened for read-only and then
-memory mapped with MAP_SHARED, then subsequent changes to the file are not
-reflected in the memory mapping.
+ b) If a file residing on a lower layer is opened for read-only and then
+    memory mapped with MAP_SHARED, then subsequent changes to the file are not
+    reflected in the memory mapping.
 
-c) If a file residing on a lower layer is being executed, then opening that
-file for write or truncating the file will not be denied with ETXTBSY.
+ c) If a file residing on a lower layer is being executed, then opening that
+    file for write or truncating the file will not be denied with ETXTBSY.
 
 The following options allow overlayfs to act more like a standards
 compliant filesystem:
 
-1) "redirect_dir"
+redirect_dir
+````````````
 
 Enabled with the mount option or module option: "redirect_dir=on" or with
 the kernel config option CONFIG_OVERLAY_FS_REDIRECT_DIR=y.
@@ -568,7 +579,8 @@ the kernel config option CONFIG_OVERLAY_FS_REDIRECT_DIR=y.
 If this feature is disabled, then rename(2) on a lower or merged directory
 will fail with EXDEV ("Invalid cross-device link").
 
-2) "inode index"
+index
+`````
 
 Enabled with the mount option or module option "index=on" or with the
 kernel config option CONFIG_OVERLAY_FS_INDEX=y.
@@ -577,7 +589,8 @@ If this feature is disabled and a file with multiple hard links is copied
 up, then this will "break" the link.  Changes will not be propagated to
 other names referring to the same inode.
 
-3) "xino"
+xino
+````
 
 Enabled with the mount option "xino=auto" or "xino=on", with the module
 option "xino_auto=on" or with the kernel config option
@@ -604,7 +617,7 @@ a crash or deadlock.
 
 Offline changes, when the overlay is not mounted, are allowed to the
 upper tree.  Offline changes to the lower tree are only allowed if the
-"metadata only copy up", "inode index", "xino" and "redirect_dir" features
+"metacopy", "index", "xino" and "redirect_dir" features
 have not been used.  If the lower tree is modified and any of these
 features has been used, the behavior of the overlay is undefined,
 though it will not result in a crash or deadlock.
@@ -644,12 +657,13 @@ directory inode.
 When encoding a file handle from an overlay filesystem object, the
 following rules apply:
 
-1. For a non-upper object, encode a lower file handle from lower inode
-2. For an indexed object, encode a lower file handle from copy_up origin
-3. For a pure-upper object and for an existing non-indexed upper object,
-   encode an upper file handle from upper inode
+ 1. For a non-upper object, encode a lower file handle from lower inode
+ 2. For an indexed object, encode a lower file handle from copy_up origin
+ 3. For a pure-upper object and for an existing non-indexed upper object,
+    encode an upper file handle from upper inode
 
 The encoded overlay file handle includes:
+
  - Header including path type information (e.g. lower/upper)
  - UUID of the underlying filesystem
  - Underlying filesystem encoding of underlying inode
@@ -659,15 +673,15 @@ are stored in extended attribute "trusted.overlay.origin".
 
 When decoding an overlay file handle, the following steps are followed:
 
-1. Find underlying layer by UUID and path type information.
-2. Decode the underlying filesystem file handle to underlying dentry.
-3. For a lower file handle, lookup the handle in index directory by name.
-4. If a whiteout is found in index, return ESTALE. This represents an
-   overlay object that was deleted after its file handle was encoded.
-5. For a non-directory, instantiate a disconnected overlay dentry from the
-   decoded underlying dentry, the path type and index inode, if found.
-6. For a directory, use the connected underlying decoded dentry, path type
-   and index, to lookup a connected overlay dentry.
+ 1. Find underlying layer by UUID and path type information.
+ 2. Decode the underlying filesystem file handle to underlying dentry.
+ 3. For a lower file handle, lookup the handle in index directory by name.
+ 4. If a whiteout is found in index, return ESTALE. This represents an
+    overlay object that was deleted after its file handle was encoded.
+ 5. For a non-directory, instantiate a disconnected overlay dentry from the
+    decoded underlying dentry, the path type and index inode, if found.
+ 6. For a directory, use the connected underlying decoded dentry, path type
+    and index, to lookup a connected overlay dentry.
 
 Decoding a non-directory file handle may return a disconnected dentry.
 copy_up of that disconnected dentry will create an upper index entry with
@@ -770,9 +784,9 @@ Testsuite
 There's a testsuite originally developed by David Howells and currently
 maintained by Amir Goldstein at:
 
-  https://github.com/amir73il/unionmount-testsuite.git
+https://github.com/amir73il/unionmount-testsuite.git
 
-Run as root:
+Run as root::
 
   # cd unionmount-testsuite
   # ./run --ov --verify
diff --git linux-libre-6.7-gnu/Documentation/filesystems/porting.rst linux-libre-6.8-gnu/Documentation/filesystems/porting.rst
index 878e72b2f8b7..1be76ef117b3 100644
--- linux-libre-6.7-gnu/Documentation/filesystems/porting.rst
+++ linux-libre-6.8-gnu/Documentation/filesystems/porting.rst
@@ -1061,3 +1061,76 @@ export_operations ->encode_fh() no longer has a default implementation to
 encode FILEID_INO32_GEN* file handles.
 Filesystems that used the default implementation may use the generic helper
 generic_encode_ino32_fh() explicitly.
+
+---
+
+**mandatory**
+
+If ->rename() update of .. on cross-directory move needs an exclusion with
+directory modifications, do *not* lock the subdirectory in question in your
+->rename() - it's done by the caller now [that item should've been added in
+28eceeda130f "fs: Lock moved directories"].
+
+---
+
+**mandatory**
+
+On same-directory ->rename() the (tautological) update of .. is not protected
+by any locks; just don't do it if the old parent is the same as the new one.
+We really can't lock two subdirectories in same-directory rename - not without
+deadlocks.
+
+---
+
+**mandatory**
+
+lock_rename() and lock_rename_child() may fail in cross-directory case, if
+their arguments do not have a common ancestor.  In that case ERR_PTR(-EXDEV)
+is returned, with no locks taken.  In-tree users updated; out-of-tree ones
+would need to do so.
+
+---
+
+**mandatory**
+
+The list of children anchored in parent dentry got turned into hlist now.
+Field names got changed (->d_children/->d_sib instead of ->d_subdirs/->d_child
+for anchor/entries resp.), so any affected places will be immediately caught
+by compiler.
+
+---
+
+**mandatory**
+
+->d_delete() instances are now called for dentries with ->d_lock held
+and refcount equal to 0.  They are not permitted to drop/regain ->d_lock.
+None of in-tree instances did anything of that sort.  Make sure yours do not...
+
+---
+
+**mandatory**
+
+->d_prune() instances are now called without ->d_lock held on the parent.
+->d_lock on dentry itself is still held; if you need per-parent exclusions (none
+of the in-tree instances did), use your own spinlock.
+
+->d_iput() and ->d_release() are called with victim dentry still in the
+list of parent's children.  It is still unhashed, marked killed, etc., just not
+removed from parent's ->d_children yet.
+
+Anyone iterating through the list of children needs to be aware of the
+half-killed dentries that might be seen there; taking ->d_lock on those will
+see them negative, unhashed and with negative refcount, which means that most
+of the in-kernel users would've done the right thing anyway without any adjustment.
+
+---
+
+**recommended**
+
+Block device freezing and thawing have been moved to holder operations.
+
+Before this change, get_active_super() would only be able to find the
+superblock of the main block device, i.e., the one stored in sb->s_bdev. Block
+device freezing now works for any block device owned by a given superblock, not
+just the main block device. The get_active_super() helper and bd_fsfreeze_sb
+pointer are gone.
diff --git linux-libre-6.7-gnu/Documentation/filesystems/proc.rst linux-libre-6.8-gnu/Documentation/filesystems/proc.rst
index 49ef12df631b..104c6d047d9b 100644
--- linux-libre-6.7-gnu/Documentation/filesystems/proc.rst
+++ linux-libre-6.8-gnu/Documentation/filesystems/proc.rst
@@ -528,9 +528,9 @@ replaced by copy-on-write) part of the underlying shmem object out on swap.
 does not take into account swapped out page of underlying shmem objects.
 "Locked" indicates whether the mapping is locked in memory or not.
 
-"THPeligible" indicates whether the mapping is eligible for allocating THP
-pages as well as the THP is PMD mappable or not - 1 if true, 0 otherwise.
-It just shows the current status.
+"THPeligible" indicates whether the mapping is eligible for allocating
+naturally aligned THP pages of any currently enabled size. 1 if true, 0
+otherwise.
 
 "VmFlags" field deserves a separate description. This member represents the
 kernel flags associated with the particular virtual memory area in two letter
diff --git linux-libre-6.7-gnu/Documentation/filesystems/smb/ksmbd.rst linux-libre-6.8-gnu/Documentation/filesystems/smb/ksmbd.rst
index 7bed96d794fc..6b30e43a0d11 100644
--- linux-libre-6.7-gnu/Documentation/filesystems/smb/ksmbd.rst
+++ linux-libre-6.8-gnu/Documentation/filesystems/smb/ksmbd.rst
@@ -73,15 +73,14 @@ Auto Negotiation               Supported.
 Compound Request               Supported.
 Oplock Cache Mechanism         Supported.
 SMB2 leases(v1 lease)          Supported.
-Directory leases(v2 lease)     Planned for future.
+Directory leases(v2 lease)     Supported.
 Multi-credits                  Supported.
 NTLM/NTLMv2                    Supported.
 HMAC-SHA256 Signing            Supported.
 Secure negotiate               Supported.
 Signing Update                 Supported.
 Pre-authentication integrity   Supported.
-SMB3 encryption(CCM, GCM)      Supported. (CCM and GCM128 supported, GCM256 in
-                               progress)
+SMB3 encryption(CCM, GCM)      Supported. (CCM/GCM128 and CCM/GCM256 supported)
 SMB direct(RDMA)               Supported.
 SMB3 Multi-channel             Partially Supported. Planned to implement
                                replay/retry mechanisms for future.
@@ -112,6 +111,10 @@ DCE/RPC support                Partially Supported. a few calls(NetShareEnumAll,
                                for Witness protocol e.g.)
 ksmbd/nfsd interoperability    Planned for future. The features that ksmbd
                                support are Leases, Notify, ACLs and Share modes.
+SMB3.1.1 Compression           Planned for future.
+SMB3.1.1 over QUIC             Planned for future.
+Signing/Encryption over RDMA   Planned for future.
+SMB3.1.1 GMAC signing support  Planned for future.
 ============================== =================================================
 
 
diff --git linux-libre-6.7-gnu/Documentation/filesystems/squashfs.rst linux-libre-6.8-gnu/Documentation/filesystems/squashfs.rst
index df42106bae71..4af8d6207509 100644
--- linux-libre-6.7-gnu/Documentation/filesystems/squashfs.rst
+++ linux-libre-6.8-gnu/Documentation/filesystems/squashfs.rst
@@ -64,6 +64,66 @@ obtained from this site also.
 The squashfs-tools development tree is now located on kernel.org
 	git://git.kernel.org/pub/scm/fs/squashfs/squashfs-tools.git
 
+2.1 Mount options
+-----------------
+===================    =========================================================
+errors=%s              Specify whether squashfs errors trigger a kernel panic
+                       or not
+
+		       ==========  =============================================
+                         continue  errors don't trigger a panic (default)
+                            panic  trigger a panic when errors are encountered,
+                                   similar to several other filesystems (e.g.
+                                   btrfs, ext4, f2fs, GFS2, jfs, ntfs, ubifs)
+
+                                   This allows a kernel dump to be saved,
+                                   useful for analyzing and debugging the
+                                   corruption.
+                       ==========  =============================================
+threads=%s             Select the decompression mode or the number of threads
+
+                       If SQUASHFS_CHOICE_DECOMP_BY_MOUNT is set:
+
+		       ==========  =============================================
+                           single  use single-threaded decompression (default)
+
+                                   Only one block (data or metadata) can be
+                                   decompressed at any one time. This limits
+                                   CPU and memory usage to a minimum, but it
+                                   also gives poor performance on parallel I/O
+                                   workloads when using multiple CPU machines
+                                   due to waiting on decompressor availability.
+                            multi  use up to two parallel decompressors per core
+
+                                   If you have a parallel I/O workload and your
+                                   system has enough memory, using this option
+                                   may improve overall I/O performance. It
+                                   dynamically allocates decompressors on a
+                                   demand basis.
+                           percpu  use a maximum of one decompressor per core
+
+                                   It uses percpu variables to ensure
+                                   decompression is load-balanced across the
+                                   cores.
+                        1|2|3|...  configure the number of threads used for
+                                   decompression
+
+                                   The upper limit is num_online_cpus() * 2.
+                       ==========  =============================================
+
+                       If SQUASHFS_CHOICE_DECOMP_BY_MOUNT is **not** set and
+                       SQUASHFS_DECOMP_MULTI, SQUASHFS_MOUNT_DECOMP_THREADS are
+                       both set:
+
+		       ==========  =============================================
+                          2|3|...  configure the number of threads used for
+                                   decompression
+
+                                   The upper limit is num_online_cpus() * 2.
+                       ==========  =============================================
+
+===================    =========================================================
+
 3. Squashfs Filesystem Design
 -----------------------------
 
diff --git linux-libre-6.7-gnu/Documentation/filesystems/vfs.rst linux-libre-6.8-gnu/Documentation/filesystems/vfs.rst
index 99acc2e98673..eebcc0f9e2bc 100644
--- linux-libre-6.7-gnu/Documentation/filesystems/vfs.rst
+++ linux-libre-6.8-gnu/Documentation/filesystems/vfs.rst
@@ -437,7 +437,7 @@ field.  This is a pointer to a "struct inode_operations" which describes
 the methods that can be performed on individual inodes.
 
 
-struct xattr_handlers
+struct xattr_handler
 ---------------------
 
 On filesystems that support extended attributes (xattrs), the s_xattr
@@ -823,7 +823,7 @@ cache in your filesystem.  The following members are defined:
 		bool (*is_partially_uptodate) (struct folio *, size_t from,
 					       size_t count);
 		void (*is_dirty_writeback)(struct folio *, bool *, bool *);
-		int (*error_remove_page) (struct mapping *mapping, struct page *page);
+		int (*error_remove_folio)(struct mapping *mapping, struct folio *);
 		int (*swap_activate)(struct swap_info_struct *sis, struct file *f, sector_t *span)
 		int (*swap_deactivate)(struct file *);
 		int (*swap_rw)(struct kiocb *iocb, struct iov_iter *iter);
@@ -1034,8 +1034,8 @@ cache in your filesystem.  The following members are defined:
 	VM if a folio should be treated as dirty or writeback for the
 	purposes of stalling.
 
-``error_remove_page``
-	normally set to generic_error_remove_page if truncation is ok
+``error_remove_folio``
+	normally set to generic_error_remove_folio if truncation is ok
 	for this address space.  Used for memory failure handling.
 	Setting this implies you deal with pages going away under you,
 	unless you have them locked or reference counts increased.
diff --git linux-libre-6.7-gnu/Documentation/filesystems/xfs/index.rst linux-libre-6.8-gnu/Documentation/filesystems/xfs/index.rst
new file mode 100644
index 000000000000..ab66c57a5d18
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/filesystems/xfs/index.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
+XFS Filesystem Documentation
+============================
+
+.. toctree::
+   :maxdepth: 2
+   :numbered:
+
+   xfs-delayed-logging-design
+   xfs-maintainer-entry-profile
+   xfs-self-describing-metadata
+   xfs-online-fsck-design
diff --git linux-libre-6.7-gnu/Documentation/filesystems/xfs-delayed-logging-design.rst linux-libre-6.8-gnu/Documentation/filesystems/xfs/xfs-delayed-logging-design.rst
similarity index 100%
rename from Documentation/filesystems/xfs-delayed-logging-design.rst
rename to Documentation/filesystems/xfs/xfs-delayed-logging-design.rst
diff --git linux-libre-6.7-gnu/Documentation/filesystems/xfs-maintainer-entry-profile.rst linux-libre-6.8-gnu/Documentation/filesystems/xfs/xfs-maintainer-entry-profile.rst
similarity index 100%
rename from Documentation/filesystems/xfs-maintainer-entry-profile.rst
rename to Documentation/filesystems/xfs/xfs-maintainer-entry-profile.rst
diff --git linux-libre-6.7-gnu/Documentation/filesystems/xfs-online-fsck-design.rst linux-libre-6.8-gnu/Documentation/filesystems/xfs/xfs-online-fsck-design.rst
similarity index 99%
rename from Documentation/filesystems/xfs-online-fsck-design.rst
rename to Documentation/filesystems/xfs/xfs-online-fsck-design.rst
index a0678101a7d0..352516feef6f 100644
--- linux-libre-6.7-gnu/Documentation/filesystems/xfs-online-fsck-design.rst
+++ linux-libre-6.8-gnu/Documentation/filesystems/xfs/xfs-online-fsck-design.rst
@@ -962,7 +962,7 @@ disk, but these buffer verifiers cannot provide any consistency checking
 between metadata structures.
 
 For more information, please see the documentation for
-Documentation/filesystems/xfs-self-describing-metadata.rst
+Documentation/filesystems/xfs/xfs-self-describing-metadata.rst
 
 Reverse Mapping
 ---------------
diff --git linux-libre-6.7-gnu/Documentation/filesystems/xfs-self-describing-metadata.rst linux-libre-6.8-gnu/Documentation/filesystems/xfs/xfs-self-describing-metadata.rst
similarity index 100%
rename from Documentation/filesystems/xfs-self-describing-metadata.rst
rename to Documentation/filesystems/xfs/xfs-self-describing-metadata.rst
diff --git linux-libre-6.7-gnu/Documentation/gpu/amdgpu/apu-asic-info-table.csv linux-libre-6.8-gnu/Documentation/gpu/amdgpu/apu-asic-info-table.csv
index 2e76b427ba1e..18868abe2a91 100644
--- linux-libre-6.7-gnu/Documentation/gpu/amdgpu/apu-asic-info-table.csv
+++ linux-libre-6.8-gnu/Documentation/gpu/amdgpu/apu-asic-info-table.csv
@@ -7,6 +7,7 @@ SteamDeck, VANGOGH, DCN 3.0.1, 10.3.1, VCN 3.1.0, 5.2.1, 11.5.0
 Ryzen 5000 series / Ryzen 7x30 series, GREEN SARDINE / Cezanne / Barcelo / Barcelo-R, DCN 2.1, 9.3, VCN 2.2, 4.1.1, 12.0.1
 Ryzen 6000 series / Ryzen 7x35 series / Ryzen 7x36 series, YELLOW CARP / Rembrandt / Rembrandt-R, 3.1.2, 10.3.3, VCN 3.1.1, 5.2.3, 13.0.3
 Ryzen 7000 series (AM5), Raphael, 3.1.5, 10.3.6, 3.1.2, 5.2.6, 13.0.5
-Ryzen 7x45 series (FL1), / Dragon Range, 3.1.5, 10.3.6, 3.1.2, 5.2.6, 13.0.5
+Ryzen 7x45 series (FL1), Dragon Range, 3.1.5, 10.3.6, 3.1.2, 5.2.6, 13.0.5
 Ryzen 7x20 series, Mendocino, 3.1.6, 10.3.7, 3.1.1, 5.2.7, 13.0.8
-Ryzen 7x40 series, Phoenix, 3.1.4, 11.0.1 / 11.0.4, 4.0.2, 6.0.1, 13.0.4 / 13.0.11
\ No newline at end of file
+Ryzen 7x40 series, Phoenix, 3.1.4, 11.0.1 / 11.0.4, 4.0.2, 6.0.1, 13.0.4 / 13.0.11
+Ryzen 8x40 series, Hawk Point, 3.1.4, 11.0.1 / 11.0.4, 4.0.2, 6.0.1, 13.0.4 / 13.0.11
diff --git linux-libre-6.7-gnu/Documentation/gpu/amdgpu/display/dc-debug.rst linux-libre-6.8-gnu/Documentation/gpu/amdgpu/display/dc-debug.rst
index 40c55a618918..817631b1dbf3 100644
--- linux-libre-6.7-gnu/Documentation/gpu/amdgpu/display/dc-debug.rst
+++ linux-libre-6.8-gnu/Documentation/gpu/amdgpu/display/dc-debug.rst
@@ -75,3 +75,44 @@ change in real-time by using something like::
 
 When reporting a bug related to DC, consider attaching this log before and
 after you reproduce the bug.
+
+DMUB Firmware Debug
+===================
+
+Sometimes, dmesg logs aren't enough. This is especially true if a feature is
+implemented primarily in DMUB firmware. In such cases, all we see in dmesg when
+an issue arises is some generic timeout error. So, to get more relevant
+information, we can trace DMUB commands by enabling the relevant bits in
+`amdgpu_dm_dmub_trace_mask`.
+
+Currently, we support the tracing of the following groups:
+
+Trace Groups
+------------
+
+.. csv-table::
+   :header-rows: 1
+   :widths: 1, 1
+   :file: ./trace-groups-table.csv
+
+**Note: Not all ASICs support all of the listed trace groups**
+
+So, to enable just PSR tracing you can use the following command::
+
+  # echo 0x8020 > /sys/kernel/debug/dri/0/amdgpu_dm_dmub_trace_mask
+
+Then, you need to enable logging trace events to the buffer, which you can do
+using the following::
+
+  # echo 1 > /sys/kernel/debug/dri/0/amdgpu_dm_dmcub_trace_event_en
+
+Lastly, after you are able to reproduce the issue you are trying to debug,
+you can disable tracing and read the trace log by using the following::
+
+  # echo 0 > /sys/kernel/debug/dri/0/amdgpu_dm_dmcub_trace_event_en
+  # cat /sys/kernel/debug/dri/0/amdgpu_dm_dmub_tracebuffer
+
+So, when reporting bugs related to features such as PSR and ABM, consider
+enabling the relevant bits in the mask before reproducing the issue and
+attach the log that you obtain from the trace buffer in any bug reports that you
+create.
diff --git linux-libre-6.7-gnu/Documentation/gpu/amdgpu/display/trace-groups-table.csv linux-libre-6.8-gnu/Documentation/gpu/amdgpu/display/trace-groups-table.csv
new file mode 100644
index 000000000000..3f6a50d1d883
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/amdgpu/display/trace-groups-table.csv
@@ -0,0 +1,29 @@
+Name, Mask Value
+INFO, 0x1
+IRQ SVC, 0x2
+VBIOS, 0x4
+REGISTER, 0x8
+PHY DBG, 0x10
+PSR, 0x20
+AUX, 0x40
+SMU, 0x80
+MALL, 0x100
+ABM, 0x200
+ALPM, 0x400
+TIMER, 0x800
+HW LOCK MGR, 0x1000
+INBOX1, 0x2000
+PHY SEQ, 0x4000
+PSR STATE, 0x8000
+ZSTATE, 0x10000
+TRANSMITTER CTL, 0x20000
+PANEL CNTL, 0x40000
+FAMS, 0x80000
+DPIA, 0x100000
+SUBVP, 0x200000
+INBOX0, 0x400000
+SDP, 0x4000000
+REPLAY, 0x8000000
+REPLAY RESIDENCY, 0x20000000
+CURSOR INFO, 0x80000000
+IPS, 0x100000000
diff --git linux-libre-6.7-gnu/Documentation/gpu/automated_testing.rst linux-libre-6.8-gnu/Documentation/gpu/automated_testing.rst
index 240e29d5ba68..2d5a28866afe 100644
--- linux-libre-6.7-gnu/Documentation/gpu/automated_testing.rst
+++ linux-libre-6.8-gnu/Documentation/gpu/automated_testing.rst
@@ -69,14 +69,15 @@ the result. They will still be run.
 
 Each new flake entry must be associated with a link to the email reporting the
 bug to the author of the affected driver, the board name or Device Tree name of
-the board, the first kernel version affected, and an approximation of the
-failure rate.
+the board, the first kernel version affected, the IGT version used for tests,
+and an approximation of the failure rate.
 
 They should be provided under the following format::
 
   # Bug Report: $LORE_OR_PATCHWORK_URL
   # Board Name: broken-board.dtb
-  # Version: 6.6-rc1
+  # Linux Version: 6.6-rc1
+  # IGT Version: 1.28-gd2af13d9f
   # Failure Rate: 100
   flaky-test
 
diff --git linux-libre-6.7-gnu/Documentation/gpu/driver-uapi.rst linux-libre-6.8-gnu/Documentation/gpu/driver-uapi.rst
index c08bcbb95fb3..e5070a0e95ab 100644
--- linux-libre-6.7-gnu/Documentation/gpu/driver-uapi.rst
+++ linux-libre-6.8-gnu/Documentation/gpu/driver-uapi.rst
@@ -17,3 +17,8 @@ VM_BIND / EXEC uAPI
     :doc: Overview
 
 .. kernel-doc:: include/uapi/drm/nouveau_drm.h
+
+drm/xe uAPI
+===========
+
+.. kernel-doc:: include/uapi/drm/xe_drm.h
diff --git linux-libre-6.7-gnu/Documentation/gpu/drivers.rst linux-libre-6.8-gnu/Documentation/gpu/drivers.rst
index 45a12e552091..b899cbc5c2b4 100644
--- linux-libre-6.7-gnu/Documentation/gpu/drivers.rst
+++ linux-libre-6.8-gnu/Documentation/gpu/drivers.rst
@@ -3,9 +3,11 @@ GPU Driver Documentation
 ========================
 
 .. toctree::
+   :maxdepth: 3
 
    amdgpu/index
    i915
+   imagination/index
    mcde
    meson
    pl111
@@ -16,6 +18,7 @@ GPU Driver Documentation
    vkms
    bridge/dw-hdmi
    xen-front
+   xe/index
    afbc
    komeda-kms
    panfrost
diff --git linux-libre-6.7-gnu/Documentation/gpu/drm-kms-helpers.rst linux-libre-6.8-gnu/Documentation/gpu/drm-kms-helpers.rst
index b748b8ae70b2..59cfe8a7a8ba 100644
--- linux-libre-6.7-gnu/Documentation/gpu/drm-kms-helpers.rst
+++ linux-libre-6.8-gnu/Documentation/gpu/drm-kms-helpers.rst
@@ -363,6 +363,12 @@ EDID Helper Functions Reference
 .. kernel-doc:: drivers/gpu/drm/drm_edid.c
    :export:
 
+.. kernel-doc:: include/drm/drm_eld.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_eld.c
+   :export:
+
 SCDC Helper Functions Reference
 ===============================
 
diff --git linux-libre-6.7-gnu/Documentation/gpu/drm-kms.rst linux-libre-6.8-gnu/Documentation/gpu/drm-kms.rst
index 270d320407c7..13d3627d8bc0 100644
--- linux-libre-6.7-gnu/Documentation/gpu/drm-kms.rst
+++ linux-libre-6.8-gnu/Documentation/gpu/drm-kms.rst
@@ -548,6 +548,8 @@ Plane Composition Properties
 .. kernel-doc:: drivers/gpu/drm/drm_blend.c
    :doc: overview
 
+.. _damage_tracking_properties:
+
 Damage Tracking Properties
 --------------------------
 
@@ -579,6 +581,12 @@ Variable Refresh Properties
 .. kernel-doc:: drivers/gpu/drm/drm_connector.c
    :doc: Variable refresh properties
 
+Cursor Hotspot Properties
+---------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_plane.c
+   :doc: hotspot properties
+
 Existing KMS Properties
 -----------------------
 
diff --git linux-libre-6.7-gnu/Documentation/gpu/drm-mm.rst linux-libre-6.8-gnu/Documentation/gpu/drm-mm.rst
index 602010cb6894..d55751cad67c 100644
--- linux-libre-6.7-gnu/Documentation/gpu/drm-mm.rst
+++ linux-libre-6.8-gnu/Documentation/gpu/drm-mm.rst
@@ -466,6 +466,8 @@ DRM MM Range Allocator Function References
 .. kernel-doc:: drivers/gpu/drm/drm_mm.c
    :export:
 
+.. _drm_gpuvm:
+
 DRM GPUVM
 =========
 
@@ -481,6 +483,8 @@ Split and Merge
 .. kernel-doc:: drivers/gpu/drm/drm_gpuvm.c
    :doc: Split and Merge
 
+.. _drm_gpuvm_locking:
+
 Locking
 -------
 
@@ -552,6 +556,12 @@ Overview
 .. kernel-doc:: drivers/gpu/drm/scheduler/sched_main.c
    :doc: Overview
 
+Flow Control
+------------
+
+.. kernel-doc:: drivers/gpu/drm/scheduler/sched_main.c
+   :doc: Flow Control
+
 Scheduler Function References
 -----------------------------
 
diff --git linux-libre-6.7-gnu/Documentation/gpu/drm-vm-bind-locking.rst linux-libre-6.8-gnu/Documentation/gpu/drm-vm-bind-locking.rst
new file mode 100644
index 000000000000..a345aa513d12
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/drm-vm-bind-locking.rst
@@ -0,0 +1,582 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+===============
+VM_BIND locking
+===============
+
+This document attempts to describe what's needed to get VM_BIND locking right,
+including the userptr mmu_notifier locking. It also discusses some
+optimizations to get rid of the looping through of all userptr mappings and
+external / shared object mappings that is needed in the simplest
+implementation. In addition, there is a section describing the VM_BIND locking
+required for implementing recoverable pagefaults.
+
+The DRM GPUVM set of helpers
+============================
+
+There is a set of helpers for drivers implementing VM_BIND, and this
+set of helpers implements much, but not all of the locking described
+in this document. In particular, it is currently lacking a userptr
+implementation. This document does not intend to describe the DRM GPUVM
+implementation in detail, but it is covered in :ref:`its own
+documentation <drm_gpuvm>`. It is highly recommended for any driver
+implementing VM_BIND to use the DRM GPUVM helpers and to extend it if
+common functionality is missing.
+
+Nomenclature
+============
+
+* ``gpu_vm``: Abstraction of a virtual GPU address space with
+  meta-data. Typically one per client (DRM file-private), or one per
+  execution context.
+* ``gpu_vma``: Abstraction of a GPU address range within a gpu_vm with
+  associated meta-data. The backing storage of a gpu_vma can either be
+  a GEM object or anonymous or page-cache pages mapped also into the CPU
+  address space for the process.
+* ``gpu_vm_bo``: Abstracts the association of a GEM object and
+  a VM. The GEM object maintains a list of gpu_vm_bos, where each gpu_vm_bo
+  maintains a list of gpu_vmas.
+* ``userptr gpu_vma or just userptr``: A gpu_vma, whose backing store
+  is anonymous or page-cache pages as described above.
+* ``revalidating``: Revalidating a gpu_vma means making the latest version
+  of the backing store resident and making sure the gpu_vma's
+  page-table entries point to that backing store.
+* ``dma_fence``: A struct dma_fence that is similar to a struct completion
+  and which tracks GPU activity. When the GPU activity is finished,
+  the dma_fence signals. Please refer to the ``DMA Fences`` section of
+  the :doc:`dma-buf doc </driver-api/dma-buf>`.
+* ``dma_resv``: A struct dma_resv (a.k.a reservation object) that is used
+  to track GPU activity in the form of multiple dma_fences on a
+  gpu_vm or a GEM object. The dma_resv contains an array / list
+  of dma_fences and a lock that needs to be held when adding
+  additional dma_fences to the dma_resv. The lock is of a type that
+  allows deadlock-safe locking of multiple dma_resvs in arbitrary
+  order. Please refer to the ``Reservation Objects`` section of the
+  :doc:`dma-buf doc </driver-api/dma-buf>`.
+* ``exec function``: An exec function is a function that revalidates all
+  affected gpu_vmas, submits a GPU command batch and registers the
+  dma_fence representing the GPU command's activity with all affected
+  dma_resvs. For completeness, although not covered by this document,
+  it's worth mentioning that an exec function may also be the
+  revalidation worker that is used by some drivers in compute /
+  long-running mode.
+* ``local object``: A GEM object which is only mapped within a
+  single VM. Local GEM objects share the gpu_vm's dma_resv.
+* ``external object``: a.k.a shared object: A GEM object which may be shared
+  by multiple gpu_vms and whose backing storage may be shared with
+  other drivers.
+
+Locks and locking order
+=======================
+
+One of the benefits of VM_BIND is that local GEM objects share the gpu_vm's
+dma_resv object and hence the dma_resv lock. So, even with a huge
+number of local GEM objects, only one lock is needed to make the exec
+sequence atomic.
+
+The following locks and locking orders are used:
+
+* The ``gpu_vm->lock`` (optionally an rwsem). Protects the gpu_vm's
+  data structure keeping track of gpu_vmas. It can also protect the
+  gpu_vm's list of userptr gpu_vmas. With a CPU mm analogy this would
+  correspond to the mmap_lock. An rwsem allows several readers to walk
+  the VM tree concurrently, but the benefit of that concurrency most
+  likely varies from driver to driver.
+* The ``userptr_seqlock``. This lock is taken in read mode for each
+  userptr gpu_vma on the gpu_vm's userptr list, and in write mode during mmu
+  notifier invalidation. This is not a real seqlock but described in
+  ``mm/mmu_notifier.c`` as a "Collision-retry read-side/write-side
+  'lock' a lot like a seqcount. However this allows multiple
+  write-sides to hold it at once...". The read side critical section
+  is enclosed by ``mmu_interval_read_begin() /
+  mmu_interval_read_retry()`` with ``mmu_interval_read_begin()``
+  sleeping if the write side is held.
+  The write side is held by the core mm while calling mmu interval
+  invalidation notifiers.
+* The ``gpu_vm->resv`` lock. Protects the gpu_vm's list of gpu_vmas needing
+  rebinding, as well as the residency state of all the gpu_vm's local
+  GEM objects.
+  Furthermore, it typically protects the gpu_vm's list of evicted and
+  external GEM objects.
+* The ``gpu_vm->userptr_notifier_lock``. This is an rwsem that is
+  taken in read mode during exec and write mode during a mmu notifier
+  invalidation. The userptr notifier lock is per gpu_vm.
+* The ``gem_object->gpuva_lock`` This lock protects the GEM object's
+  list of gpu_vm_bos. This is usually the same lock as the GEM
+  object's dma_resv, but some drivers protects this list differently,
+  see below.
+* The ``gpu_vm list spinlocks``. With some implementations they are needed
+  to be able to update the gpu_vm evicted- and external object
+  list. For those implementations, the spinlocks are grabbed when the
+  lists are manipulated. However, to avoid locking order violations
+  with the dma_resv locks, a special scheme is needed when iterating
+  over the lists.
+
+.. _gpu_vma lifetime:
+
+Protection and lifetime of gpu_vm_bos and gpu_vmas
+==================================================
+
+The GEM object's list of gpu_vm_bos, and the gpu_vm_bo's list of gpu_vmas
+is protected by the ``gem_object->gpuva_lock``, which is typically the
+same as the GEM object's dma_resv, but if the driver
+needs to access these lists from within a dma_fence signalling
+critical section, it can instead choose to protect it with a
+separate lock, which can be locked from within the dma_fence signalling
+critical section. Such drivers then need to pay additional attention
+to what locks need to be taken from within the loop when iterating
+over the gpu_vm_bo and gpu_vma lists to avoid locking-order violations.
+
+The DRM GPUVM set of helpers provide lockdep asserts that this lock is
+held in relevant situations and also provides a means of making itself
+aware of which lock is actually used: :c:func:`drm_gem_gpuva_set_lock`.
+
+Each gpu_vm_bo holds a reference counted pointer to the underlying GEM
+object, and each gpu_vma holds a reference counted pointer to the
+gpu_vm_bo. When iterating over the GEM object's list of gpu_vm_bos and
+over the gpu_vm_bo's list of gpu_vmas, the ``gem_object->gpuva_lock`` must
+not be dropped, otherwise, gpu_vmas attached to a gpu_vm_bo may
+disappear without notice since those are not reference-counted. A
+driver may implement its own scheme to allow this at the expense of
+additional complexity, but this is outside the scope of this document.
+
+In the DRM GPUVM implementation, each gpu_vm_bo and each gpu_vma
+holds a reference count on the gpu_vm itself. Due to this, and to avoid circular
+reference counting, cleanup of the gpu_vm's gpu_vmas must not be done from the
+gpu_vm's destructor. Drivers typically implements a gpu_vm close
+function for this cleanup. The gpu_vm close function will abort gpu
+execution using this VM, unmap all gpu_vmas and release page-table memory.
+
+Revalidation and eviction of local objects
+==========================================
+
+Note that in all the code examples given below we use simplified
+pseudo-code. In particular, the dma_resv deadlock avoidance algorithm
+as well as reserving memory for dma_resv fences is left out.
+
+Revalidation
+____________
+With VM_BIND, all local objects need to be resident when the gpu is
+executing using the gpu_vm, and the objects need to have valid
+gpu_vmas set up pointing to them. Typically, each gpu command buffer
+submission is therefore preceded with a re-validation section:
+
+.. code-block:: C
+
+   dma_resv_lock(gpu_vm->resv);
+
+   // Validation section starts here.
+   for_each_gpu_vm_bo_on_evict_list(&gpu_vm->evict_list, &gpu_vm_bo) {
+           validate_gem_bo(&gpu_vm_bo->gem_bo);
+
+           // The following list iteration needs the Gem object's
+           // dma_resv to be held (it protects the gpu_vm_bo's list of
+           // gpu_vmas, but since local gem objects share the gpu_vm's
+           // dma_resv, it is already held at this point.
+           for_each_gpu_vma_of_gpu_vm_bo(&gpu_vm_bo, &gpu_vma)
+                  move_gpu_vma_to_rebind_list(&gpu_vma, &gpu_vm->rebind_list);
+   }
+
+   for_each_gpu_vma_on_rebind_list(&gpu vm->rebind_list, &gpu_vma) {
+           rebind_gpu_vma(&gpu_vma);
+           remove_gpu_vma_from_rebind_list(&gpu_vma);
+   }
+   // Validation section ends here, and job submission starts.
+
+   add_dependencies(&gpu_job, &gpu_vm->resv);
+   job_dma_fence = gpu_submit(&gpu_job));
+
+   add_dma_fence(job_dma_fence, &gpu_vm->resv);
+   dma_resv_unlock(gpu_vm->resv);
+
+The reason for having a separate gpu_vm rebind list is that there
+might be userptr gpu_vmas that are not mapping a buffer object that
+also need rebinding.
+
+Eviction
+________
+
+Eviction of one of these local objects will then look similar to the
+following:
+
+.. code-block:: C
+
+   obj = get_object_from_lru();
+
+   dma_resv_lock(obj->resv);
+   for_each_gpu_vm_bo_of_obj(obj, &gpu_vm_bo);
+           add_gpu_vm_bo_to_evict_list(&gpu_vm_bo, &gpu_vm->evict_list);
+
+   add_dependencies(&eviction_job, &obj->resv);
+   job_dma_fence = gpu_submit(&eviction_job);
+   add_dma_fence(&obj->resv, job_dma_fence);
+
+   dma_resv_unlock(&obj->resv);
+   put_object(obj);
+
+Note that since the object is local to the gpu_vm, it will share the gpu_vm's
+dma_resv lock such that ``obj->resv == gpu_vm->resv``.
+The gpu_vm_bos marked for eviction are put on the gpu_vm's evict list,
+which is protected by ``gpu_vm->resv``. During eviction all local
+objects have their dma_resv locked and, due to the above equality, also
+the gpu_vm's dma_resv protecting the gpu_vm's evict list is locked.
+
+With VM_BIND, gpu_vmas don't need to be unbound before eviction,
+since the driver must ensure that the eviction blit or copy will wait
+for GPU idle or depend on all previous GPU activity. Furthermore, any
+subsequent attempt by the GPU to access freed memory through the
+gpu_vma will be preceded by a new exec function, with a revalidation
+section which will make sure all gpu_vmas are rebound. The eviction
+code holding the object's dma_resv while revalidating will ensure a
+new exec function may not race with the eviction.
+
+A driver can be implemented in such a way that, on each exec function,
+only a subset of vmas are selected for rebind.  In this case, all vmas that are
+*not* selected for rebind must be unbound before the exec
+function workload is submitted.
+
+Locking with external buffer objects
+====================================
+
+Since external buffer objects may be shared by multiple gpu_vm's they
+can't share their reservation object with a single gpu_vm. Instead
+they need to have a reservation object of their own. The external
+objects bound to a gpu_vm using one or many gpu_vmas are therefore put on a
+per-gpu_vm list which is protected by the gpu_vm's dma_resv lock or
+one of the :ref:`gpu_vm list spinlocks <Spinlock iteration>`. Once
+the gpu_vm's reservation object is locked, it is safe to traverse the
+external object list and lock the dma_resvs of all external
+objects. However, if instead a list spinlock is used, a more elaborate
+iteration scheme needs to be used.
+
+At eviction time, the gpu_vm_bos of *all* the gpu_vms an external
+object is bound to need to be put on their gpu_vm's evict list.
+However, when evicting an external object, the dma_resvs of the
+gpu_vms the object is bound to are typically not held. Only
+the object's private dma_resv can be guaranteed to be held. If there
+is a ww_acquire context at hand at eviction time we could grab those
+dma_resvs but that could cause expensive ww_mutex rollbacks. A simple
+option is to just mark the gpu_vm_bos of the evicted gem object with
+an ``evicted`` bool that is inspected before the next time the
+corresponding gpu_vm evicted list needs to be traversed. For example, when
+traversing the list of external objects and locking them. At that time,
+both the gpu_vm's dma_resv and the object's dma_resv is held, and the
+gpu_vm_bo marked evicted, can then be added to the gpu_vm's list of
+evicted gpu_vm_bos. The ``evicted`` bool is formally protected by the
+object's dma_resv.
+
+The exec function becomes
+
+.. code-block:: C
+
+   dma_resv_lock(gpu_vm->resv);
+
+   // External object list is protected by the gpu_vm->resv lock.
+   for_each_gpu_vm_bo_on_extobj_list(gpu_vm, &gpu_vm_bo) {
+           dma_resv_lock(gpu_vm_bo.gem_obj->resv);
+           if (gpu_vm_bo_marked_evicted(&gpu_vm_bo))
+                   add_gpu_vm_bo_to_evict_list(&gpu_vm_bo, &gpu_vm->evict_list);
+   }
+
+   for_each_gpu_vm_bo_on_evict_list(&gpu_vm->evict_list, &gpu_vm_bo) {
+           validate_gem_bo(&gpu_vm_bo->gem_bo);
+
+           for_each_gpu_vma_of_gpu_vm_bo(&gpu_vm_bo, &gpu_vma)
+                  move_gpu_vma_to_rebind_list(&gpu_vma, &gpu_vm->rebind_list);
+   }
+
+   for_each_gpu_vma_on_rebind_list(&gpu vm->rebind_list, &gpu_vma) {
+           rebind_gpu_vma(&gpu_vma);
+           remove_gpu_vma_from_rebind_list(&gpu_vma);
+   }
+
+   add_dependencies(&gpu_job, &gpu_vm->resv);
+   job_dma_fence = gpu_submit(&gpu_job));
+
+   add_dma_fence(job_dma_fence, &gpu_vm->resv);
+   for_each_external_obj(gpu_vm, &obj)
+          add_dma_fence(job_dma_fence, &obj->resv);
+   dma_resv_unlock_all_resv_locks();
+
+And the corresponding shared-object aware eviction would look like:
+
+.. code-block:: C
+
+   obj = get_object_from_lru();
+
+   dma_resv_lock(obj->resv);
+   for_each_gpu_vm_bo_of_obj(obj, &gpu_vm_bo)
+           if (object_is_vm_local(obj))
+                add_gpu_vm_bo_to_evict_list(&gpu_vm_bo, &gpu_vm->evict_list);
+           else
+                mark_gpu_vm_bo_evicted(&gpu_vm_bo);
+
+   add_dependencies(&eviction_job, &obj->resv);
+   job_dma_fence = gpu_submit(&eviction_job);
+   add_dma_fence(&obj->resv, job_dma_fence);
+
+   dma_resv_unlock(&obj->resv);
+   put_object(obj);
+
+.. _Spinlock iteration:
+
+Accessing the gpu_vm's lists without the dma_resv lock held
+===========================================================
+
+Some drivers will hold the gpu_vm's dma_resv lock when accessing the
+gpu_vm's evict list and external objects lists. However, there are
+drivers that need to access these lists without the dma_resv lock
+held, for example due to asynchronous state updates from within the
+dma_fence signalling critical path. In such cases, a spinlock can be
+used to protect manipulation of the lists. However, since higher level
+sleeping locks need to be taken for each list item while iterating
+over the lists, the items already iterated over need to be
+temporarily moved to a private list and the spinlock released
+while processing each item:
+
+.. code block:: C
+
+    struct list_head still_in_list;
+
+    INIT_LIST_HEAD(&still_in_list);
+
+    spin_lock(&gpu_vm->list_lock);
+    do {
+            struct list_head *entry = list_first_entry_or_null(&gpu_vm->list, head);
+
+            if (!entry)
+                    break;
+
+            list_move_tail(&entry->head, &still_in_list);
+            list_entry_get_unless_zero(entry);
+            spin_unlock(&gpu_vm->list_lock);
+
+            process(entry);
+
+            spin_lock(&gpu_vm->list_lock);
+            list_entry_put(entry);
+    } while (true);
+
+    list_splice_tail(&still_in_list, &gpu_vm->list);
+    spin_unlock(&gpu_vm->list_lock);
+
+Due to the additional locking and atomic operations, drivers that *can*
+avoid accessing the gpu_vm's list outside of the dma_resv lock
+might want to avoid also this iteration scheme. Particularly, if the
+driver anticipates a large number of list items. For lists where the
+anticipated number of list items is small, where list iteration doesn't
+happen very often or if there is a significant additional cost
+associated with each iteration, the atomic operation overhead
+associated with this type of iteration is, most likely, negligible. Note that
+if this scheme is used, it is necessary to make sure this list
+iteration is protected by an outer level lock or semaphore, since list
+items are temporarily pulled off the list while iterating, and it is
+also worth mentioning that the local list ``still_in_list`` should
+also be considered protected by the ``gpu_vm->list_lock``, and it is
+thus possible that items can be removed also from the local list
+concurrently with list iteration.
+
+Please refer to the :ref:`DRM GPUVM locking section
+<drm_gpuvm_locking>` and its internal
+:c:func:`get_next_vm_bo_from_list` function.
+
+
+userptr gpu_vmas
+================
+
+A userptr gpu_vma is a gpu_vma that, instead of mapping a buffer object to a
+GPU virtual address range, directly maps a CPU mm range of anonymous-
+or file page-cache pages.
+A very simple approach would be to just pin the pages using
+pin_user_pages() at bind time and unpin them at unbind time, but this
+creates a Denial-Of-Service vector since a single user-space process
+would be able to pin down all of system memory, which is not
+desirable. (For special use-cases and assuming proper accounting pinning might
+still be a desirable feature, though). What we need to do in the
+general case is to obtain a reference to the desired pages, make sure
+we are notified using a MMU notifier just before the CPU mm unmaps the
+pages, dirty them if they are not mapped read-only to the GPU, and
+then drop the reference.
+When we are notified by the MMU notifier that CPU mm is about to drop the
+pages, we need to stop GPU access to the pages by waiting for VM idle
+in the MMU notifier and make sure that before the next time the GPU
+tries to access whatever is now present in the CPU mm range, we unmap
+the old pages from the GPU page tables and repeat the process of
+obtaining new page references. (See the :ref:`notifier example
+<Invalidation example>` below). Note that when the core mm decides to
+laundry pages, we get such an unmap MMU notification and can mark the
+pages dirty again before the next GPU access. We also get similar MMU
+notifications for NUMA accounting which the GPU driver doesn't really
+need to care about, but so far it has proven difficult to exclude
+certain notifications.
+
+Using a MMU notifier for device DMA (and other methods) is described in
+:ref:`the pin_user_pages() documentation <mmu-notifier-registration-case>`.
+
+Now, the method of obtaining struct page references using
+get_user_pages() unfortunately can't be used under a dma_resv lock
+since that would violate the locking order of the dma_resv lock vs the
+mmap_lock that is grabbed when resolving a CPU pagefault. This means
+the gpu_vm's list of userptr gpu_vmas needs to be protected by an
+outer lock, which in our example below is the ``gpu_vm->lock``.
+
+The MMU interval seqlock for a userptr gpu_vma is used in the following
+way:
+
+.. code-block:: C
+
+   // Exclusive locking mode here is strictly needed only if there are
+   // invalidated userptr gpu_vmas present, to avoid concurrent userptr
+   // revalidations of the same userptr gpu_vma.
+   down_write(&gpu_vm->lock);
+   retry:
+
+   // Note: mmu_interval_read_begin() blocks until there is no
+   // invalidation notifier running anymore.
+   seq = mmu_interval_read_begin(&gpu_vma->userptr_interval);
+   if (seq != gpu_vma->saved_seq) {
+           obtain_new_page_pointers(&gpu_vma);
+           dma_resv_lock(&gpu_vm->resv);
+           add_gpu_vma_to_revalidate_list(&gpu_vma, &gpu_vm);
+           dma_resv_unlock(&gpu_vm->resv);
+           gpu_vma->saved_seq = seq;
+   }
+
+   // The usual revalidation goes here.
+
+   // Final userptr sequence validation may not happen before the
+   // submission dma_fence is added to the gpu_vm's resv, from the POW
+   // of the MMU invalidation notifier. Hence the
+   // userptr_notifier_lock that will make them appear atomic.
+
+   add_dependencies(&gpu_job, &gpu_vm->resv);
+   down_read(&gpu_vm->userptr_notifier_lock);
+   if (mmu_interval_read_retry(&gpu_vma->userptr_interval, gpu_vma->saved_seq)) {
+          up_read(&gpu_vm->userptr_notifier_lock);
+          goto retry;
+   }
+
+   job_dma_fence = gpu_submit(&gpu_job));
+
+   add_dma_fence(job_dma_fence, &gpu_vm->resv);
+
+   for_each_external_obj(gpu_vm, &obj)
+          add_dma_fence(job_dma_fence, &obj->resv);
+
+   dma_resv_unlock_all_resv_locks();
+   up_read(&gpu_vm->userptr_notifier_lock);
+   up_write(&gpu_vm->lock);
+
+The code between ``mmu_interval_read_begin()`` and the
+``mmu_interval_read_retry()`` marks the read side critical section of
+what we call the ``userptr_seqlock``. In reality, the gpu_vm's userptr
+gpu_vma list is looped through, and the check is done for *all* of its
+userptr gpu_vmas, although we only show a single one here.
+
+The userptr gpu_vma MMU invalidation notifier might be called from
+reclaim context and, again, to avoid locking order violations, we can't
+take any dma_resv lock nor the gpu_vm->lock from within it.
+
+.. _Invalidation example:
+.. code-block:: C
+
+  bool gpu_vma_userptr_invalidate(userptr_interval, cur_seq)
+  {
+          // Make sure the exec function either sees the new sequence
+          // and backs off or we wait for the dma-fence:
+
+          down_write(&gpu_vm->userptr_notifier_lock);
+          mmu_interval_set_seq(userptr_interval, cur_seq);
+          up_write(&gpu_vm->userptr_notifier_lock);
+
+          // At this point, the exec function can't succeed in
+          // submitting a new job, because cur_seq is an invalid
+          // sequence number and will always cause a retry. When all
+          // invalidation callbacks, the mmu notifier core will flip
+          // the sequence number to a valid one. However we need to
+          // stop gpu access to the old pages here.
+
+          dma_resv_wait_timeout(&gpu_vm->resv, DMA_RESV_USAGE_BOOKKEEP,
+                                false, MAX_SCHEDULE_TIMEOUT);
+          return true;
+  }
+
+When this invalidation notifier returns, the GPU can no longer be
+accessing the old pages of the userptr gpu_vma and needs to redo the
+page-binding before a new GPU submission can succeed.
+
+Efficient userptr gpu_vma exec_function iteration
+_________________________________________________
+
+If the gpu_vm's list of userptr gpu_vmas becomes large, it's
+inefficient to iterate through the complete lists of userptrs on each
+exec function to check whether each userptr gpu_vma's saved
+sequence number is stale. A solution to this is to put all
+*invalidated* userptr gpu_vmas on a separate gpu_vm list and
+only check the gpu_vmas present on this list on each exec
+function. This list will then lend itself very-well to the spinlock
+locking scheme that is
+:ref:`described in the spinlock iteration section <Spinlock iteration>`, since
+in the mmu notifier, where we add the invalidated gpu_vmas to the
+list, it's not possible to take any outer locks like the
+``gpu_vm->lock`` or the ``gpu_vm->resv`` lock. Note that the
+``gpu_vm->lock`` still needs to be taken while iterating to ensure the list is
+complete, as also mentioned in that section.
+
+If using an invalidated userptr list like this, the retry check in the
+exec function trivially becomes a check for invalidated list empty.
+
+Locking at bind and unbind time
+===============================
+
+At bind time, assuming a GEM object backed gpu_vma, each
+gpu_vma needs to be associated with a gpu_vm_bo and that
+gpu_vm_bo in turn needs to be added to the GEM object's
+gpu_vm_bo list, and possibly to the gpu_vm's external object
+list. This is referred to as *linking* the gpu_vma, and typically
+requires that the ``gpu_vm->lock`` and the ``gem_object->gpuva_lock``
+are held. When unlinking a gpu_vma the same locks should be held,
+and that ensures that when iterating over ``gpu_vmas`, either under
+the ``gpu_vm->resv`` or the GEM object's dma_resv, that the gpu_vmas
+stay alive as long as the lock under which we iterate is not released. For
+userptr gpu_vmas it's similarly required that during vma destroy, the
+outer ``gpu_vm->lock`` is held, since otherwise when iterating over
+the invalidated userptr list as described in the previous section,
+there is nothing keeping those userptr gpu_vmas alive.
+
+Locking for recoverable page-fault page-table updates
+=====================================================
+
+There are two important things we need to ensure with locking for
+recoverable page-faults:
+
+* At the time we return pages back to the system / allocator for
+  reuse, there should be no remaining GPU mappings and any GPU TLB
+  must have been flushed.
+* The unmapping and mapping of a gpu_vma must not race.
+
+Since the unmapping (or zapping) of GPU ptes is typically taking place
+where it is hard or even impossible to take any outer level locks we
+must either introduce a new lock that is held at both mapping and
+unmapping time, or look at the locks we do hold at unmapping time and
+make sure that they are held also at mapping time. For userptr
+gpu_vmas, the ``userptr_seqlock`` is held in write mode in the mmu
+invalidation notifier where zapping happens. Hence, if the
+``userptr_seqlock`` as well as the ``gpu_vm->userptr_notifier_lock``
+is held in read mode during mapping, it will not race with the
+zapping. For GEM object backed gpu_vmas, zapping will take place under
+the GEM object's dma_resv and ensuring that the dma_resv is held also
+when populating the page-tables for any gpu_vma pointing to the GEM
+object, will similarly ensure we are race-free.
+
+If any part of the mapping is performed asynchronously
+under a dma-fence with these locks released, the zapping will need to
+wait for that dma-fence to signal under the relevant lock before
+starting to modify the page-table.
+
+Since modifying the
+page-table structure in a way that frees up page-table memory
+might also require outer level locks, the zapping of GPU ptes
+typically focuses only on zeroing page-table or page-directory entries
+and flushing TLB, whereas freeing of page-table memory is deferred to
+unbind or rebind time.
diff --git linux-libre-6.7-gnu/Documentation/gpu/imagination/index.rst linux-libre-6.8-gnu/Documentation/gpu/imagination/index.rst
new file mode 100644
index 000000000000..0c1e247cea41
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/imagination/index.rst
@@ -0,0 +1,13 @@
+=======================================
+drm/imagination PowerVR Graphics Driver
+=======================================
+
+.. kernel-doc:: drivers/gpu/drm/imagination/pvr_drv.c
+   :doc: PowerVR (Series 6 and later) and IMG Graphics Driver
+
+Contents
+========
+.. toctree::
+   :maxdepth: 2
+
+   uapi
diff --git linux-libre-6.7-gnu/Documentation/gpu/imagination/uapi.rst linux-libre-6.8-gnu/Documentation/gpu/imagination/uapi.rst
new file mode 100644
index 000000000000..7502413d0a93
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/imagination/uapi.rst
@@ -0,0 +1,171 @@
+====
+UAPI
+====
+The sources associated with this section can be found in ``pvr_drm.h``.
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: PowerVR UAPI
+
+OBJECT ARRAYS
+=============
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_obj_array
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: DRM_PVR_OBJ_ARRAY
+
+IOCTLS
+======
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: PowerVR IOCTL interface
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: PVR_IOCTL
+
+DEV_QUERY
+---------
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: PowerVR IOCTL DEV_QUERY interface
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_dev_query
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_ioctl_dev_query_args
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_dev_query_gpu_info
+                 drm_pvr_dev_query_runtime_info
+                 drm_pvr_dev_query_hwrt_info
+                 drm_pvr_dev_query_quirks
+                 drm_pvr_dev_query_enhancements
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_heap_id
+                 drm_pvr_heap
+                 drm_pvr_dev_query_heap_info
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_static_data_area_usage
+                 drm_pvr_static_data_area
+                 drm_pvr_dev_query_static_data_areas
+
+CREATE_BO
+---------
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: PowerVR IOCTL CREATE_BO interface
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_ioctl_create_bo_args
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: Flags for CREATE_BO
+
+GET_BO_MMAP_OFFSET
+------------------
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: PowerVR IOCTL GET_BO_MMAP_OFFSET interface
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_ioctl_get_bo_mmap_offset_args
+
+CREATE_VM_CONTEXT and DESTROY_VM_CONTEXT
+----------------------------------------
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: PowerVR IOCTL CREATE_VM_CONTEXT and DESTROY_VM_CONTEXT interfaces
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_ioctl_create_vm_context_args
+                 drm_pvr_ioctl_destroy_vm_context_args
+
+VM_MAP and VM_UNMAP
+-------------------
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: PowerVR IOCTL VM_MAP and VM_UNMAP interfaces
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_ioctl_vm_map_args
+                 drm_pvr_ioctl_vm_unmap_args
+
+CREATE_CONTEXT and DESTROY_CONTEXT
+----------------------------------
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: PowerVR IOCTL CREATE_CONTEXT and DESTROY_CONTEXT interfaces
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_ioctl_create_context_args
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_ctx_priority
+                 drm_pvr_ctx_type
+                 drm_pvr_static_render_context_state
+                 drm_pvr_static_render_context_state_format
+                 drm_pvr_reset_framework
+                 drm_pvr_reset_framework_format
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_ioctl_destroy_context_args
+
+CREATE_FREE_LIST and DESTROY_FREE_LIST
+--------------------------------------
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: PowerVR IOCTL CREATE_FREE_LIST and DESTROY_FREE_LIST interfaces
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_ioctl_create_free_list_args
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_ioctl_destroy_free_list_args
+
+CREATE_HWRT_DATASET and DESTROY_HWRT_DATASET
+--------------------------------------------
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: PowerVR IOCTL CREATE_HWRT_DATASET and DESTROY_HWRT_DATASET interfaces
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_ioctl_create_hwrt_dataset_args
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_create_hwrt_geom_data_args
+                 drm_pvr_create_hwrt_rt_data_args
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_ioctl_destroy_hwrt_dataset_args
+
+SUBMIT_JOBS
+-----------
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: PowerVR IOCTL SUBMIT_JOBS interface
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: Flags for the drm_pvr_sync_op object.
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_ioctl_submit_jobs_args
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: Flags for SUBMIT_JOB ioctl geometry command.
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: Flags for SUBMIT_JOB ioctl fragment command.
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: Flags for SUBMIT_JOB ioctl compute command.
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :doc: Flags for SUBMIT_JOB ioctl transfer command.
+
+.. kernel-doc:: include/uapi/drm/pvr_drm.h
+   :identifiers: drm_pvr_sync_op
+                 drm_pvr_job_type
+                 drm_pvr_hwrt_data_ref
+                 drm_pvr_job
+
+Internal notes
+==============
+.. kernel-doc:: drivers/gpu/drm/imagination/pvr_device.h
+   :doc: IOCTL validation helpers
+
+.. kernel-doc:: drivers/gpu/drm/imagination/pvr_device.h
+   :identifiers: PVR_STATIC_ASSERT_64BIT_ALIGNED PVR_IOCTL_UNION_PADDING_CHECK
+                 pvr_ioctl_union_padding_check
diff --git linux-libre-6.7-gnu/Documentation/gpu/implementation_guidelines.rst linux-libre-6.8-gnu/Documentation/gpu/implementation_guidelines.rst
index 138e637dcc6b..dbccfa72f1c9 100644
--- linux-libre-6.7-gnu/Documentation/gpu/implementation_guidelines.rst
+++ linux-libre-6.8-gnu/Documentation/gpu/implementation_guidelines.rst
@@ -7,3 +7,4 @@ Misc DRM driver uAPI- and feature implementation guidelines
 .. toctree::
 
    drm-vm-bind-async
+   drm-vm-bind-locking
diff --git linux-libre-6.7-gnu/Documentation/gpu/rfc/xe.rst linux-libre-6.8-gnu/Documentation/gpu/rfc/xe.rst
index c29113a0ac30..97cf87578f97 100644
--- linux-libre-6.7-gnu/Documentation/gpu/rfc/xe.rst
+++ linux-libre-6.8-gnu/Documentation/gpu/rfc/xe.rst
@@ -70,35 +70,42 @@ When the time comes for Xe, the protection will be lifted on Xe and kept in i915
 Xe – Pre-Merge Goals - Work-in-Progress
 =======================================
 
-Drm_scheduler
--------------
-Xe primarily uses Firmware based scheduling (GuC FW). However, it will use
-drm_scheduler as the scheduler ‘frontend’ for userspace submission in order to
-resolve syncobj and dma-buf implicit sync dependencies. However, drm_scheduler is
-not yet prepared to handle the 1-to-1 relationship between drm_gpu_scheduler and
-drm_sched_entity.
+Display integration with i915
+-----------------------------
+In order to share the display code with the i915 driver so that there is maximum
+reuse, the i915/display/ code is built twice, once for i915.ko and then for
+xe.ko. Currently, the i915/display code in Xe tree is polluted with many 'ifdefs'
+depending on the build target. The goal is to refactor both Xe and i915/display
+code simultaneously in order to get a clean result before they land upstream, so
+that display can already be part of the initial pull request towards drm-next.
 
-Deeper changes to drm_scheduler should *not* be required to get Xe accepted, but
-some consensus needs to be reached between Xe and other community drivers that
-could also benefit from this work, for coupling FW based/assisted submission such
-as the ARM’s new Mali GPU driver, and others.
+However, display code should not gate the acceptance of Xe in upstream. Xe
+patches will be refactored in a way that display code can be removed, if needed,
+from the first pull request of Xe towards drm-next. The expectation is that when
+both drivers are part of the drm-tip, the introduction of cleaner patches will be
+easier and speed up.
 
-As a key measurable result, the patch series introducing Xe itself shall not
-depend on any other patch touching drm_scheduler itself that was not yet merged
-through drm-misc. This, by itself, already includes the reach of an agreement for
-uniform 1 to 1 relationship implementation / usage across drivers.
+Xe – uAPI high level overview
+=============================
 
-ASYNC VM_BIND
--------------
-Although having a common DRM level IOCTL for VM_BIND is not a requirement to get
-Xe merged, it is mandatory to have a consensus with other drivers and Mesa.
-It needs to be clear how to handle async VM_BIND and interactions with userspace
-memory fences. Ideally with helper support so people don't get it wrong in all
-possible ways.
+...Warning: To be done in follow up patches after/when/where the main consensus in various items are individually reached.
 
-As a key measurable result, the benefits of ASYNC VM_BIND and a discussion of
-various flavors, error handling and sample API suggestions are documented in
-:doc:`The ASYNC VM_BIND document </gpu/drm-vm-bind-async>`.
+Xe – Pre-Merge Goals - Completed
+================================
+
+Drm_exec
+--------
+Helper to make dma_resv locking for a big number of buffers is getting removed in
+the drm_exec series proposed in https://patchwork.freedesktop.org/patch/524376/
+If that happens, Xe needs to change and incorporate the changes in the driver.
+The goal is to engage with the Community to understand if the best approach is to
+move that to the drivers that are using it or if we should keep the helpers in
+place waiting for Xe to get merged.
+
+This item ties into the GPUVA, VM_BIND, and even long-running compute support.
+
+As a key measurable result, we need to have a community consensus documented in
+this document and the Xe driver prepared for the changes, if necessary.
 
 Userptr integration and vm_bind
 -------------------------------
@@ -123,10 +130,45 @@ Documentation should include:
 
  * O(1) complexity under VM_BIND.
 
+The document is now included in the drm documentation :doc:`here </gpu/drm-vm-bind-async>`.
+
 Some parts of userptr like mmu_notifiers should become GPUVA or DRM helpers when
 the second driver supporting VM_BIND+userptr appears. Details to be defined when
 the time comes.
 
+The DRM GPUVM helpers do not yet include the userptr parts, but discussions
+about implementing them are ongoing.
+
+ASYNC VM_BIND
+-------------
+Although having a common DRM level IOCTL for VM_BIND is not a requirement to get
+Xe merged, it is mandatory to have a consensus with other drivers and Mesa.
+It needs to be clear how to handle async VM_BIND and interactions with userspace
+memory fences. Ideally with helper support so people don't get it wrong in all
+possible ways.
+
+As a key measurable result, the benefits of ASYNC VM_BIND and a discussion of
+various flavors, error handling and sample API suggestions are documented in
+:doc:`The ASYNC VM_BIND document </gpu/drm-vm-bind-async>`.
+
+Drm_scheduler
+-------------
+Xe primarily uses Firmware based scheduling (GuC FW). However, it will use
+drm_scheduler as the scheduler ‘frontend’ for userspace submission in order to
+resolve syncobj and dma-buf implicit sync dependencies. However, drm_scheduler is
+not yet prepared to handle the 1-to-1 relationship between drm_gpu_scheduler and
+drm_sched_entity.
+
+Deeper changes to drm_scheduler should *not* be required to get Xe accepted, but
+some consensus needs to be reached between Xe and other community drivers that
+could also benefit from this work, for coupling FW based/assisted submission such
+as the ARM’s new Mali GPU driver, and others.
+
+As a key measurable result, the patch series introducing Xe itself shall not
+depend on any other patch touching drm_scheduler itself that was not yet merged
+through drm-misc. This, by itself, already includes the reach of an agreement for
+uniform 1 to 1 relationship implementation / usage across drivers.
+
 Long running compute: minimal data structure/scaffolding
 --------------------------------------------------------
 The generic scheduler code needs to include the handling of endless compute
@@ -139,46 +181,6 @@ this minimal drm/scheduler work, if needed, merged to drm-misc in a way that any
 drm driver, including Xe, could re-use and add their own individual needs on top
 in a next stage. However, this should not block the initial merge.
 
-This is a non-blocker item since the driver without the support for the long
-running compute enabled is not a showstopper.
-
-Display integration with i915
------------------------------
-In order to share the display code with the i915 driver so that there is maximum
-reuse, the i915/display/ code is built twice, once for i915.ko and then for
-xe.ko. Currently, the i915/display code in Xe tree is polluted with many 'ifdefs'
-depending on the build target. The goal is to refactor both Xe and i915/display
-code simultaneously in order to get a clean result before they land upstream, so
-that display can already be part of the initial pull request towards drm-next.
-
-However, display code should not gate the acceptance of Xe in upstream. Xe
-patches will be refactored in a way that display code can be removed, if needed,
-from the first pull request of Xe towards drm-next. The expectation is that when
-both drivers are part of the drm-tip, the introduction of cleaner patches will be
-easier and speed up.
-
-Drm_exec
---------
-Helper to make dma_resv locking for a big number of buffers is getting removed in
-the drm_exec series proposed in https://patchwork.freedesktop.org/patch/524376/
-If that happens, Xe needs to change and incorporate the changes in the driver.
-The goal is to engage with the Community to understand if the best approach is to
-move that to the drivers that are using it or if we should keep the helpers in
-place waiting for Xe to get merged.
-
-This item ties into the GPUVA, VM_BIND, and even long-running compute support.
-
-As a key measurable result, we need to have a community consensus documented in
-this document and the Xe driver prepared for the changes, if necessary.
-
-Xe – uAPI high level overview
-=============================
-
-...Warning: To be done in follow up patches after/when/where the main consensus in various items are individually reached.
-
-Xe – Pre-Merge Goals - Completed
-================================
-
 Dev_coredump
 ------------
 
diff --git linux-libre-6.7-gnu/Documentation/gpu/todo.rst linux-libre-6.8-gnu/Documentation/gpu/todo.rst
index 03fe5d1247be..41a264bf84ce 100644
--- linux-libre-6.7-gnu/Documentation/gpu/todo.rst
+++ linux-libre-6.8-gnu/Documentation/gpu/todo.rst
@@ -337,8 +337,8 @@ connector register/unregister fixes
 
 Level: Intermediate
 
-Remove load/unload callbacks from all non-DRIVER_LEGACY drivers
----------------------------------------------------------------
+Remove load/unload callbacks
+----------------------------
 
 The load/unload callbacks in struct &drm_driver are very much midlayers, plus
 for historical reasons they get the ordering wrong (and we can't fix that)
@@ -347,8 +347,7 @@ between setting up the &drm_driver structure and calling drm_dev_register().
 - Rework drivers to no longer use the load/unload callbacks, directly coding the
   load/unload sequence into the driver's probe function.
 
-- Once all non-DRIVER_LEGACY drivers are converted, disallow the load/unload
-  callbacks for all modern drivers.
+- Once all drivers are converted, remove the load/unload callbacks.
 
 Contact: Daniel Vetter
 
@@ -621,6 +620,23 @@ Contact: Javier Martinez Canillas <javierm@redhat.com>
 
 Level: Intermediate
 
+Clean up and document former selftests suites
+---------------------------------------------
+
+Some KUnit test suites (drm_buddy, drm_cmdline_parser, drm_damage_helper,
+drm_format, drm_framebuffer, drm_dp_mst_helper, drm_mm, drm_plane_helper and
+drm_rect) are former selftests suites that have been converted over when KUnit
+was first introduced.
+
+These suites were fairly undocumented, and with different goals than what unit
+tests can be. Trying to identify what each test in these suites actually test
+for, whether that makes sense for a unit test, and either remove it if it
+doesn't or document it if it does would be of great help.
+
+Contact: Maxime Ripard <mripard@kernel.org>
+
+Level: Intermediate
+
 Enable trinity for DRM
 ----------------------
 
@@ -765,6 +781,29 @@ Contact: Hans de Goede
 
 Level: Advanced
 
+Buffer age or other damage accumulation algorithm for buffer damage
+===================================================================
+
+Drivers that do per-buffer uploads, need a buffer damage handling (rather than
+frame damage like drivers that do per-plane or per-CRTC uploads), but there is
+no support to get the buffer age or any other damage accumulation algorithm.
+
+For this reason, the damage helpers just fallback to a full plane update if the
+framebuffer attached to a plane has changed since the last page-flip. Drivers
+set &drm_plane_state.ignore_damage_clips to true as indication to
+drm_atomic_helper_damage_iter_init() and drm_atomic_helper_damage_iter_next()
+helpers that the damage clips should be ignored.
+
+This should be improved to get damage tracking properly working on drivers that
+do per-buffer uploads.
+
+More information about damage tracking and references to learning materials can
+be found in :ref:`damage_tracking_properties`.
+
+Contact: Javier Martinez Canillas <javierm@redhat.com>
+
+Level: Advanced
+
 Outside DRM
 ===========
 
diff --git linux-libre-6.7-gnu/Documentation/gpu/xe/index.rst linux-libre-6.8-gnu/Documentation/gpu/xe/index.rst
new file mode 100644
index 000000000000..c224ecaee81e
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/xe/index.rst
@@ -0,0 +1,25 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+=======================
+drm/xe Intel GFX Driver
+=======================
+
+The drm/xe driver supports some future GFX cards with rendering, display,
+compute and media. Support for currently available platforms like TGL, ADL,
+DG2, etc is provided to prototype the driver.
+
+.. toctree::
+   :titlesonly:
+
+   xe_mm
+   xe_map
+   xe_migrate
+   xe_cs
+   xe_pm
+   xe_pcode
+   xe_gt_mcr
+   xe_wa
+   xe_rtp
+   xe_firmware
+   xe_tile
+   xe_debugging
diff --git linux-libre-6.7-gnu/Documentation/gpu/xe/xe_cs.rst linux-libre-6.8-gnu/Documentation/gpu/xe/xe_cs.rst
new file mode 100644
index 000000000000..e379aed4f5a8
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/xe/xe_cs.rst
@@ -0,0 +1,8 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+==================
+Command submission
+==================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_exec.c
+   :doc: Execbuf (User GPU command submission)
diff --git linux-libre-6.7-gnu/Documentation/gpu/xe/xe_debugging.rst linux-libre-6.8-gnu/Documentation/gpu/xe/xe_debugging.rst
new file mode 100644
index 000000000000..d65e56ff3500
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/xe/xe_debugging.rst
@@ -0,0 +1,7 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+=========
+Debugging
+=========
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_assert.h
diff --git linux-libre-6.7-gnu/Documentation/gpu/xe/xe_firmware.rst linux-libre-6.8-gnu/Documentation/gpu/xe/xe_firmware.rst
new file mode 100644
index 000000000000..afcb561cd37d
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/xe/xe_firmware.rst
@@ -0,0 +1,37 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+========
+Firmware
+========
+
+Firmware Layout
+===============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_uc_fw_abi.h
+   :doc: CSS-based Firmware Layout
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_uc_fw_abi.h
+   :doc: GSC-based Firmware Layout
+
+Write Once Protected Content Memory (WOPCM) Layout
+==================================================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_wopcm.c
+   :doc: Write Once Protected Content Memory (WOPCM) Layout
+
+GuC CTB Blob
+============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_guc_ct.c
+   :doc: GuC CTB Blob
+
+GuC Power Conservation (PC)
+===========================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_guc_pc.c
+   :doc: GuC Power Conservation (PC)
+
+Internal API
+============
+
+TODO
diff --git linux-libre-6.7-gnu/Documentation/gpu/xe/xe_gt_mcr.rst linux-libre-6.8-gnu/Documentation/gpu/xe/xe_gt_mcr.rst
new file mode 100644
index 000000000000..848c07bc36d0
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/xe/xe_gt_mcr.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+==============================================
+GT Multicast/Replicated (MCR) Register Support
+==============================================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_gt_mcr.c
+   :doc: GT Multicast/Replicated (MCR) Register Support
+
+Internal API
+============
+
+TODO
diff --git linux-libre-6.7-gnu/Documentation/gpu/xe/xe_map.rst linux-libre-6.8-gnu/Documentation/gpu/xe/xe_map.rst
new file mode 100644
index 000000000000..a098cfd2df04
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/xe/xe_map.rst
@@ -0,0 +1,8 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+=========
+Map Layer
+=========
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_map.h
+   :doc: Map layer
diff --git linux-libre-6.7-gnu/Documentation/gpu/xe/xe_migrate.rst linux-libre-6.8-gnu/Documentation/gpu/xe/xe_migrate.rst
new file mode 100644
index 000000000000..f92faec0ac94
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/xe/xe_migrate.rst
@@ -0,0 +1,8 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+=============
+Migrate Layer
+=============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_migrate_doc.h
+   :doc: Migrate Layer
diff --git linux-libre-6.7-gnu/Documentation/gpu/xe/xe_mm.rst linux-libre-6.8-gnu/Documentation/gpu/xe/xe_mm.rst
new file mode 100644
index 000000000000..6c8fd8b4a466
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/xe/xe_mm.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+=================
+Memory Management
+=================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_bo_doc.h
+   :doc: Buffer Objects (BO)
+
+Pagetable building
+==================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_pt.c
+   :doc: Pagetable building
diff --git linux-libre-6.7-gnu/Documentation/gpu/xe/xe_pcode.rst linux-libre-6.8-gnu/Documentation/gpu/xe/xe_pcode.rst
new file mode 100644
index 000000000000..d2e22cc45061
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/xe/xe_pcode.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+=====
+Pcode
+=====
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_pcode.c
+   :doc: PCODE
+
+Internal API
+============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_pcode.c
+   :internal:
diff --git linux-libre-6.7-gnu/Documentation/gpu/xe/xe_pm.rst linux-libre-6.8-gnu/Documentation/gpu/xe/xe_pm.rst
new file mode 100644
index 000000000000..6781cdfb24f6
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/xe/xe_pm.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+========================
+Runtime Power Management
+========================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_pm.c
+   :doc: Xe Power Management
+
+Internal API
+============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_pm.c
+   :internal:
diff --git linux-libre-6.7-gnu/Documentation/gpu/xe/xe_rtp.rst linux-libre-6.8-gnu/Documentation/gpu/xe/xe_rtp.rst
new file mode 100644
index 000000000000..7fdf4b6c1a04
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/xe/xe_rtp.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+=========================
+Register Table Processing
+=========================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_rtp.c
+   :doc: Register Table Processing
+
+Internal API
+============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_rtp_types.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_rtp.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_rtp.c
+   :internal:
diff --git linux-libre-6.7-gnu/Documentation/gpu/xe/xe_tile.rst linux-libre-6.8-gnu/Documentation/gpu/xe/xe_tile.rst
new file mode 100644
index 000000000000..c33f68dd95b6
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/xe/xe_tile.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+==================
+Multi-tile Devices
+==================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_tile.c
+   :doc: Multi-tile Design
+
+Internal API
+============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_tile.c
+   :internal:
diff --git linux-libre-6.7-gnu/Documentation/gpu/xe/xe_wa.rst linux-libre-6.8-gnu/Documentation/gpu/xe/xe_wa.rst
new file mode 100644
index 000000000000..f8811cc6adcc
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/gpu/xe/xe_wa.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+====================
+Hardware workarounds
+====================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_wa.c
+   :doc: Hardware workarounds
+
+Internal API
+============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_wa.c
+   :internal:
diff --git linux-libre-6.7-gnu/Documentation/hwmon/dell-smm-hwmon.rst linux-libre-6.8-gnu/Documentation/hwmon/dell-smm-hwmon.rst
index d8f1d6859b96..977263cb57a8 100644
--- linux-libre-6.7-gnu/Documentation/hwmon/dell-smm-hwmon.rst
+++ linux-libre-6.8-gnu/Documentation/hwmon/dell-smm-hwmon.rst
@@ -186,8 +186,7 @@ SMM Interface
 The driver uses the SMM interface to send commands to the system BIOS.
 This interface is normally used by Dell's 32-bit diagnostic program or
 on newer notebook models by the buildin BIOS diagnostics.
-The SMM is triggered by writing to the special ioports ``0xb2`` and ``0x84``,
-and may cause short hangs when the BIOS code is taking too long to
+The SMM may cause short hangs when the BIOS code is taking too long to
 execute.
 
 The SMM handler inside the system BIOS looks at the contents of the
@@ -210,7 +209,40 @@ The SMM handler can signal a failure by either:
 
 - setting the lower sixteen bits of ``eax`` to ``0xffff``
 - not modifying ``eax`` at all
-- setting the carry flag
+- setting the carry flag (legacy SMM interface only)
+
+Legacy SMM Interface
+--------------------
+
+When using the legacy SMM interface, a SMM is triggered by writing the least significant byte
+of the command code to the special ioports ``0xb2`` and ``0x84``. This interface is not
+described inside the ACPI tables and can thus only be detected by issuing a test SMM call.
+
+WMI SMM Interface
+-----------------
+
+On modern Dell machines, the SMM calls are done over ACPI WMI:
+
+::
+
+ #pragma namespace("\\\\.\\root\\dcim\\sysman\\diagnostics")
+ [WMI, Provider("Provider_DiagnosticsServices"), Dynamic, Locale("MS\\0x409"),
+  Description("RunDellDiag"), guid("{F1DDEE52-063C-4784-A11E-8A06684B9B01}")]
+ class LegacyDiags {
+  [key, read] string InstanceName;
+  [read] boolean Active;
+
+  [WmiMethodId(1), Implemented, read, write, Description("Legacy Method ")]
+  void Execute([in, out] uint32 EaxLen, [in, out, WmiSizeIs("EaxLen") : ToInstance] uint8 EaxVal[],
+               [in, out] uint32 EbxLen, [in, out, WmiSizeIs("EbxLen") : ToInstance] uint8 EbxVal[],
+               [in, out] uint32 EcxLen, [in, out, WmiSizeIs("EcxLen") : ToInstance] uint8 EcxVal[],
+               [in, out] uint32 EdxLen, [in, out, WmiSizeIs("EdxLen") : ToInstance] uint8 EdxVal[]);
+ };
+
+Some machines support only the WMI SMM interface, while some machines support both interfaces.
+The driver automatically detects which interfaces are present and will use the WMI SMM interface
+if the legacy SMM interface is not present. The WMI SMM interface is usually slower than the
+legacy SMM interface since ACPI methods need to be called in order to trigger a SMM.
 
 SMM command codes
 -----------------
diff --git linux-libre-6.7-gnu/Documentation/hwmon/gigabyte_waterforce.rst linux-libre-6.8-gnu/Documentation/hwmon/gigabyte_waterforce.rst
new file mode 100644
index 000000000000..d47f3e8516ee
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/hwmon/gigabyte_waterforce.rst
@@ -0,0 +1,47 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver gigabyte_waterforce
+=================================
+
+Supported devices:
+
+* Gigabyte AORUS WATERFORCE X240
+* Gigabyte AORUS WATERFORCE X280
+* Gigabyte AORUS WATERFORCE X360
+
+Author: Aleksa Savic
+
+Description
+-----------
+
+This driver enables hardware monitoring support for the listed Gigabyte Waterforce
+all-in-one CPU liquid coolers. Available sensors are pump and fan speed in RPM, as
+well as coolant temperature. Also available through debugfs is the firmware version.
+
+Attaching a fan is optional and allows it to be controlled from the device. If
+it's not connected, the fan-related sensors will report zeroes.
+
+The addressable RGB LEDs and LCD screen are not supported in this driver and should
+be controlled through userspace tools.
+
+Usage notes
+-----------
+
+As these are USB HIDs, the driver can be loaded automatically by the kernel and
+supports hot swapping.
+
+Sysfs entries
+-------------
+
+=========== =============================================
+fan1_input  Fan speed (in rpm)
+fan2_input  Pump speed (in rpm)
+temp1_input Coolant temperature (in millidegrees Celsius)
+=========== =============================================
+
+Debugfs entries
+---------------
+
+================ =======================
+firmware_version Device firmware version
+================ =======================
diff --git linux-libre-6.7-gnu/Documentation/hwmon/index.rst linux-libre-6.8-gnu/Documentation/hwmon/index.rst
index 72f4e6065bae..c7ed1f73ac06 100644
--- linux-libre-6.7-gnu/Documentation/hwmon/index.rst
+++ linux-libre-6.8-gnu/Documentation/hwmon/index.rst
@@ -73,6 +73,7 @@ Hardware Monitoring Kernel Drivers
    ftsteutates
    g760a
    g762
+   gigabyte_waterforce
    gsc-hwmon
    gl518sm
    gxp-fan-ctrl
@@ -128,6 +129,7 @@ Hardware Monitoring Kernel Drivers
    ltc4245
    ltc4260
    ltc4261
+   ltc4286
    max127
    max15301
    max16064
@@ -156,9 +158,11 @@ Hardware Monitoring Kernel Drivers
    mcp3021
    menf21bmc
    mlxreg-fan
+   mp2856
    mp2888
    mp2975
    mp5023
+   mp5990
    nct6683
    nct6775
    nct7802
diff --git linux-libre-6.7-gnu/Documentation/hwmon/lm75.rst linux-libre-6.8-gnu/Documentation/hwmon/lm75.rst
index 8d0ab4ad5fb5..6adab608dd05 100644
--- linux-libre-6.7-gnu/Documentation/hwmon/lm75.rst
+++ linux-libre-6.8-gnu/Documentation/hwmon/lm75.rst
@@ -133,6 +133,16 @@ Supported chips:
 
                https://www.nxp.com/docs/en/data-sheet/PCT2075.pdf
 
+  * AMS OSRAM AS6200
+
+    Prefix: 'as6200'
+
+    Addresses scanned: none
+
+    Datasheet: Publicly available at the AMS website
+
+               https://ams.com/documents/20143/36005/AS6200_DS000449_4-00.pdf
+
 Author: Frodo Looijaard <frodol@dds.nl>
 
 Description
diff --git linux-libre-6.7-gnu/Documentation/hwmon/ltc4286.rst linux-libre-6.8-gnu/Documentation/hwmon/ltc4286.rst
new file mode 100644
index 000000000000..2cd149676d86
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/hwmon/ltc4286.rst
@@ -0,0 +1,95 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver ltc4286
+=====================
+
+Supported chips:
+
+  * Analog Devices LTC4286
+
+    Prefix: 'ltc4286'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4286.pdf
+
+  * Analog Devices LTC4287
+
+    Prefix: 'ltc4287'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4287.pdf
+
+Author: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Analog Devices LTC4286
+and LTC4287 Hot-Swap Controller and Digital Power Monitors.
+
+LTC4286 and LTC4287 are hot-swap controllers that allow a circuit board
+to be removed from or inserted into a live backplane. They also feature
+current and voltage readback via an integrated 12 bit analog-to-digital
+converter (ADC), accessed using a PMBus interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+The shunt value in micro-ohms can be set via device tree at compile-time. Please
+refer to the Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml for bindings
+if the device tree is used.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data. Please see
+Documentation/hwmon/pmbus.rst for details.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write, history reset
+attributes are write-only, all other attributes are read-only.
+
+======================= =======================================================
+in1_label		"vin"
+in1_input		Measured voltage.
+in1_alarm		Input voltage alarm.
+in1_min 		Minimum input voltage.
+in1_max 		Maximum input voltage.
+
+in2_label		"vout1"
+in2_input		Measured voltage.
+in2_alarm		Output voltage alarm.
+in2_min 		Minimum output voltage.
+in2_max 		Maximum output voltage.
+
+curr1_label		"iout1"
+curr1_input		Measured current.
+curr1_alarm		Output current alarm.
+curr1_max		Maximum current.
+
+power1_label		"pin"
+power1_input		Input power.
+power1_alarm		Input power alarm.
+power1_max		Maximum poewr.
+
+temp1_input		Chip temperature.
+temp1_min		Minimum chip temperature.
+temp1_max		Maximum chip temperature.
+temp1_crit		Critical chip temperature.
+temp1_alarm		Chip temperature alarm.
+======================= =======================================================
diff --git linux-libre-6.7-gnu/Documentation/hwmon/max31827.rst linux-libre-6.8-gnu/Documentation/hwmon/max31827.rst
index 9a1055a007cf..44ab9dc064cb 100644
--- linux-libre-6.7-gnu/Documentation/hwmon/max31827.rst
+++ linux-libre-6.8-gnu/Documentation/hwmon/max31827.rst
@@ -52,13 +52,21 @@ MAX31827 has low and over temperature alarms with an effective value and a
 hysteresis value: -40 and -30 degrees for under temperature alarm and +100 and
 +90 degrees for over temperature alarm.
 
-The alarm can be configured in comparator and interrupt mode. Currently only
-comparator mode is implemented. In Comparator mode, the OT/UT status bits have a
-value of 1 when the temperature rises above the TH value or falls below TL,
-which is also subject to the Fault Queue selection. OT status returns to 0 when
-the temperature drops below the TH_HYST value or when shutdown mode is entered.
-Similarly, UT status returns to 0 when the temperature rises above TL_HYST value
-or when shutdown mode is entered.
+The alarm can be configured in comparator and interrupt mode from the
+devicetree. In Comparator mode, the OT/UT status bits have a value of 1 when the
+temperature rises above the TH value or falls below TL, which is also subject to
+the Fault Queue selection. OT status returns to 0 when the temperature drops
+below the TH_HYST value or when shutdown mode is entered. Similarly, UT status
+returns to 0 when the temperature rises above TL_HYST value or when shutdown
+mode is entered.
+
+In interrupt mode exceeding TH also sets OT status to 1, which remains set until
+a read operation is performed on the configuration/status register (max or min
+attribute); at this point, it returns to 0. Once OT status is set to 1 from
+exceeding TH and reset, it is set to 1 again only when the temperature drops
+below TH_HYST. The output remains asserted until it is reset by a read. It is
+set again if the temperature rises above TH, and so on. The same logic applies
+to the operation of the UT status bit.
 
 Putting the MAX31827 into shutdown mode also resets the OT/UT status bits. Note
 that if the mode is changed while OT/UT status bits are set, an OT/UT status
@@ -68,13 +76,42 @@ clear the status bits before changing the operating mode.
 
 The conversions can be manual with the one-shot functionality and automatic with
 a set frequency. When powered on, the chip measures temperatures with 1 conv/s.
+The conversion rate can be modified with update_interval attribute of the chip.
+Conversion/second = 1/update_interval. Thus, the available options according to
+the data sheet are:
+
+- 64000 (ms) = 1 conv/64 sec
+- 32000 (ms) = 1 conv/32 sec
+- 16000 (ms) = 1 conv/16 sec
+- 4000 (ms) = 1 conv/4 sec
+- 1000 (ms) = 1 conv/sec (default)
+- 250 (ms) = 4 conv/sec
+- 125 (ms) = 8 conv/sec
+
 Enabling the device when it is already enabled has the side effect of setting
 the conversion frequency to 1 conv/s. The conversion time varies depending on
-the resolution. The conversion time doubles with every bit of increased
-resolution. For 10 bit resolution 35ms are needed, while for 12 bit resolution
-(default) 140ms. When chip is in shutdown mode and a read operation is
-requested, one-shot is triggered, the device waits for 140 (conversion time) ms,
-and only after that is the temperature value register read.
+the resolution.
+
+The conversion time doubles with every bit of increased resolution. The
+available resolutions are:
+
+- 8 bit -> 8.75 ms conversion time
+- 9 bit -> 17.5 ms conversion time
+- 10 bit -> 35 ms conversion time
+- 12 bit (default) -> 140 ms conversion time
+
+There is a temp1_resolution attribute which indicates the unit change in the
+input temperature in milli-degrees C.
+
+- 1000 mC -> 8 bit
+- 500 mC -> 9 bit
+- 250 mC -> 10 bit
+- 62 mC -> 12 bit (default) - actually this is 62.5, but the fil returns 62
+
+When chip is in shutdown mode and a read operation is requested, one-shot is
+triggered, the device waits for <conversion time> ms, and only after that is
+the temperature value register read. Note that the conversion times are rounded
+up to the nearest possible integer.
 
 The LSB of the temperature values is 0.0625 degrees Celsius, but the values of
 the temperatures are displayed in milli-degrees. This means, that some data is
@@ -83,8 +120,18 @@ in the writing of alarm values too. For positive numbers the user-input value
 will always be rounded down to the nearest possible value, for negative numbers
 the user-input will always be rounded up to the nearest possible value.
 
+Bus timeout resets the I2C-compatible interface when SCL is low for more than
+30ms (nominal).
+
+Alarm polarity determines if the active state of the alarm is low or high. The
+behavior for both settings is dependent on the Fault Queue setting. The ALARM
+pin is an open-drain output and requires a pullup resistor to operate.
+
+The Fault Queue bits select how many consecutive temperature faults must occur
+before overtemperature or undertemperature faults are indicated in the
+corresponding status bits.
+
 Notes
 -----
 
-Currently fault queue, alarm polarity and resolution cannot be modified.
-PEC is not implemented either.
+PEC is not implemented.
diff --git linux-libre-6.7-gnu/Documentation/hwmon/mp2856.rst linux-libre-6.8-gnu/Documentation/hwmon/mp2856.rst
new file mode 100644
index 000000000000..af625c22b6ea
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/hwmon/mp2856.rst
@@ -0,0 +1,98 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver mp2856
+====================
+
+Supported chips:
+
+  * MPS MP2856
+
+    Prefix: 'mp2856'
+
+  * MPS MP2857
+
+    Prefix: 'mp2857'
+
+Author:
+
+	Peter Yin <peter.yin@quantatw.com>
+
+Description
+-----------
+
+This driver implements support for Monolithic Power Systems, Inc. (MPS)
+vendor dual-loop, digital, multi-phase controller MP2856/MP2857
+
+This device:
+
+- Supports up to two power rail.
+- Supports two pages 0 and 1 for and also pages 2 for configuration.
+- Can configured VOUT readout in direct or VID format and allows
+  setting of different formats on rails 1 and 2. For VID the following
+  protocols are available: AMD SVI3 mode with 5-mV/LSB.
+
+Device supports:
+
+- SVID interface.
+- AVSBus interface.
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+Device supports direct format for reading output current, output voltage,
+input and output power and temperature.
+Device supports linear format for reading input voltage and input power.
+Device supports VID and direct formats for reading output voltage.
+The below VID modes are supported: AMD SVI3.
+
+The driver provides the following sysfs attributes for current measurements:
+
+- indexes 1  for "iin";
+- indexes 2, 3 for "iout";
+
+**curr[1-3]_alarm**
+
+**curr[1-3]_input**
+
+**curr[1-3]_label**
+
+The driver provides the following sysfs attributes for voltage measurements.
+
+- indexes 1 for "vin";
+- indexes 2, 3 for "vout";
+
+**in[1-3]_crit**
+
+**in[1-3]_crit_alarm**
+
+**in[1-3]_input**
+
+**in[1-3]_label**
+
+**in[1-3]_lcrit**
+
+**in[1-3]_lcrit_alarm**
+
+The driver provides the following sysfs attributes for power measurements.
+
+- indexes 1 for "pin";
+- indexes 2, 3 for "pout";
+
+**power[1-3]_alarm**
+
+**power[1-3]_input**
+
+**power[1-3]_label**
+
+The driver provides the following sysfs attributes for temperature measurements.
+
+**temp[1-2]_crit**
+
+**temp[1-2]_crit_alarm**
+
+**temp[1-2]_input**
+
+**temp[1-2]_max**
+
+**temp[1-2]_max_alarm**
diff --git linux-libre-6.7-gnu/Documentation/hwmon/mp5990.rst linux-libre-6.8-gnu/Documentation/hwmon/mp5990.rst
new file mode 100644
index 000000000000..6f2f0c099d44
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/hwmon/mp5990.rst
@@ -0,0 +1,84 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver mp5990
+====================
+
+Supported chips:
+
+  * MPS MP5990
+
+    Prefix: 'mp5990'
+
+  * Datasheet
+
+    Publicly available at the MPS website : https://www.monolithicpower.com/en/mp5990.html
+
+Author:
+
+	Peter Yin <peteryin.openbmc@gmail.com>
+
+Description
+-----------
+
+This driver implements support for Monolithic Power Systems, Inc. (MPS)
+MP5990 Hot-Swap Controller.
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+Device supports direct and linear format for reading input voltage,
+output voltage, output current, input power and temperature.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_max**
+
+**in1_max_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_alarm**
+
+**curr1_max**
+
+The driver provides the following attributes for input power:
+
+**power1_input**
+
+**power1_label**
+
+**power1_alarm**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
diff --git linux-libre-6.7-gnu/Documentation/hwmon/sht3x.rst linux-libre-6.8-gnu/Documentation/hwmon/sht3x.rst
index 87864ffd1777..957c854f5d08 100644
--- linux-libre-6.7-gnu/Documentation/hwmon/sht3x.rst
+++ linux-libre-6.8-gnu/Documentation/hwmon/sht3x.rst
@@ -9,7 +9,19 @@ Supported chips:
 
     Addresses scanned: none
 
-    Datasheet: https://www.sensirion.com/file/datasheet_sht3x_digital
+    Datasheets:
+        - https://sensirion.com/media/documents/213E6A3B/63A5A569/Datasheet_SHT3x_DIS.pdf
+        - https://sensirion.com/media/documents/051DF50B/639C8101/Sensirion_Humidity_and_Temperature_Sensors_Datasheet_SHT33.pdf
+
+  * Sensirion STS3x-DIS
+
+    Prefix: 'sts3x'
+
+    Addresses scanned: none
+
+    Datasheets:
+        - https://sensirion.com/media/documents/1DA31AFD/61641F76/Sensirion_Temperature_Sensors_STS3x_Datasheet.pdf
+        - https://sensirion.com/media/documents/292A335C/65537BAF/Sensirion_Datasheet_STS32_STS33.pdf
 
 Author:
 
@@ -19,16 +31,17 @@ Author:
 Description
 -----------
 
-This driver implements support for the Sensirion SHT3x-DIS chip, a humidity
-and temperature sensor. Temperature is measured in degrees celsius, relative
-humidity is expressed as a percentage. In the sysfs interface, all values are
-scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500.
+This driver implements support for the Sensirion SHT3x-DIS and STS3x-DIS
+series of humidity and temperature sensors. Temperature is measured in degrees
+celsius, relative humidity is expressed as a percentage. In the sysfs interface,
+all values are scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500.
 
 The device communicates with the I2C protocol. Sensors can have the I2C
-addresses 0x44 or 0x45, depending on the wiring. See
-Documentation/i2c/instantiating-devices.rst for methods to instantiate the device.
+addresses 0x44 or 0x45 (0x4a or 0x4b for sts3x), depending on the wiring. See
+Documentation/i2c/instantiating-devices.rst for methods to instantiate the
+device.
 
-Even if sht3x sensor supports clock-strech(blocking mode) and non-strench
+Even if sht3x sensor supports clock-stretch (blocking mode) and non-stretch
 (non-blocking mode) in single-shot mode, this driver only supports the latter.
 
 The sht3x sensor supports a single shot mode as well as 5 periodic measure
diff --git linux-libre-6.7-gnu/Documentation/index.rst linux-libre-6.8-gnu/Documentation/index.rst
index 9dfdc826618c..36e61783437c 100644
--- linux-libre-6.7-gnu/Documentation/index.rst
+++ linux-libre-6.8-gnu/Documentation/index.rst
@@ -113,6 +113,7 @@ to ReStructured Text format, or are simply too old.
    :maxdepth: 1
 
    staging/index
+   RAS/ras
 
 
 Translations
diff --git linux-libre-6.7-gnu/Documentation/input/input_kapi.rst linux-libre-6.8-gnu/Documentation/input/input_kapi.rst
index 41f1b7e6b78e..9937522daa9b 100644
--- linux-libre-6.7-gnu/Documentation/input/input_kapi.rst
+++ linux-libre-6.8-gnu/Documentation/input/input_kapi.rst
@@ -4,11 +4,8 @@
 Linux Input Subsystem kernel API
 ################################
 
-.. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+   :caption: Table of Contents
    :maxdepth: 2
    :numbered:
 
diff --git linux-libre-6.7-gnu/Documentation/input/input_uapi.rst linux-libre-6.8-gnu/Documentation/input/input_uapi.rst
index 4a0391609327..8275b4223a84 100644
--- linux-libre-6.7-gnu/Documentation/input/input_uapi.rst
+++ linux-libre-6.8-gnu/Documentation/input/input_uapi.rst
@@ -4,11 +4,8 @@
 Linux Input Subsystem userspace API
 ###################################
 
-.. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+   :caption: Table of Contents
    :maxdepth: 2
    :numbered:
 
diff --git linux-libre-6.7-gnu/Documentation/input/joydev/index.rst linux-libre-6.8-gnu/Documentation/input/joydev/index.rst
index ebcff43056e2..d03d6f6cbfab 100644
--- linux-libre-6.7-gnu/Documentation/input/joydev/index.rst
+++ linux-libre-6.8-gnu/Documentation/input/joydev/index.rst
@@ -6,11 +6,8 @@ Linux Joystick support
 
 :Copyright: |copy| 1996-2000 Vojtech Pavlik <vojtech@ucw.cz> - Sponsored by SuSE
 
-.. class:: toc-title
-
-	Table of Contents
-
 .. toctree::
+	:caption: Table of Contents
 	:maxdepth: 3
 
 	joystick
diff --git linux-libre-6.7-gnu/Documentation/kbuild/Kconfig.recursion-issue-01 linux-libre-6.8-gnu/Documentation/kbuild/Kconfig.recursion-issue-01
index e8877db0461f..ac49836d8ecf 100644
--- linux-libre-6.7-gnu/Documentation/kbuild/Kconfig.recursion-issue-01
+++ linux-libre-6.8-gnu/Documentation/kbuild/Kconfig.recursion-issue-01
@@ -16,13 +16,13 @@
 # that are possible for CORE. So for example if CORE_BELL_A_ADVANCED is 'y',
 # CORE must be 'y' too.
 #
-#  * What influences CORE_BELL_A_ADVANCED ?
+#  * What influences CORE_BELL_A_ADVANCED?
 #
 # As the name implies CORE_BELL_A_ADVANCED is an advanced feature of
 # CORE_BELL_A so naturally it depends on CORE_BELL_A. So if CORE_BELL_A is 'y'
 # we know CORE_BELL_A_ADVANCED can be 'y' too.
 #
-#   * What influences CORE_BELL_A ?
+#   * What influences CORE_BELL_A?
 #
 # CORE_BELL_A depends on CORE, so CORE influences CORE_BELL_A.
 #
@@ -34,7 +34,7 @@
 # the "recursive dependency detected" error.
 #
 # Reading the Documentation/kbuild/Kconfig.recursion-issue-01 file it may be
-# obvious that an easy to solution to this problem should just be the removal
+# obvious that an easy solution to this problem should just be the removal
 # of the "select CORE" from CORE_BELL_A_ADVANCED as that is implicit already
 # since CORE_BELL_A depends on CORE. Recursive dependency issues are not always
 # so trivial to resolve, we provide another example below of practical
diff --git linux-libre-6.7-gnu/Documentation/livepatch/callbacks.rst linux-libre-6.8-gnu/Documentation/livepatch/callbacks.rst
index 470944aa8658..914445784ce4 100644
--- linux-libre-6.7-gnu/Documentation/livepatch/callbacks.rst
+++ linux-libre-6.8-gnu/Documentation/livepatch/callbacks.rst
@@ -110,7 +110,7 @@ Global data update
 ------------------
 
 A pre-patch callback can be useful to update a global variable.  For
-example, 75ff39ccc1bd ("tcp: make challenge acks less predictable")
+example, commit 75ff39ccc1bd ("tcp: make challenge acks less predictable")
 changes a global sysctl, as well as patches the tcp_send_challenge_ack()
 function.
 
@@ -126,7 +126,7 @@ Although __init and probe functions are not directly livepatch-able, it
 may be possible to implement similar updates via pre/post-patch
 callbacks.
 
-The commit ``48900cb6af42 ("virtio-net: drop NETIF_F_FRAGLIST")`` change the way that
+The commit 48900cb6af42 ("virtio-net: drop NETIF_F_FRAGLIST") change the way that
 virtnet_probe() initialized its driver's net_device features.  A
 pre/post-patch callback could iterate over all such devices, making a
 similar change to their hw_features value.  (Client functions of the
diff --git linux-libre-6.7-gnu/Documentation/locking/mutex-design.rst linux-libre-6.8-gnu/Documentation/locking/mutex-design.rst
index 78540cd7f54b..7c30b4aa5e28 100644
--- linux-libre-6.7-gnu/Documentation/locking/mutex-design.rst
+++ linux-libre-6.8-gnu/Documentation/locking/mutex-design.rst
@@ -101,6 +101,24 @@ features that make lock debugging easier and faster:
     - Detects multi-task circular deadlocks and prints out all affected
       locks and tasks (and only those tasks).
 
+Mutexes - and most other sleeping locks like rwsems - do not provide an
+implicit reference for the memory they occupy, which reference is released
+with mutex_unlock().
+
+[ This is in contrast with spin_unlock() [or completion_done()], which
+  APIs can be used to guarantee that the memory is not touched by the
+  lock implementation after spin_unlock()/completion_done() releases
+  the lock. ]
+
+mutex_unlock() may access the mutex structure even after it has internally
+released the lock already - so it's not safe for another context to
+acquire the mutex and assume that the mutex_unlock() context is not using
+the structure anymore.
+
+The mutex user must ensure that the mutex is not destroyed while a
+release operation is still in progress - in other words, callers of
+mutex_unlock() must ensure that the mutex stays alive until mutex_unlock()
+has returned.
 
 Interfaces
 ----------
diff --git linux-libre-6.7-gnu/Documentation/maintainer/maintainer-entry-profile.rst linux-libre-6.8-gnu/Documentation/maintainer/maintainer-entry-profile.rst
index 7ad4bfc2cc03..18cee1edaecb 100644
--- linux-libre-6.7-gnu/Documentation/maintainer/maintainer-entry-profile.rst
+++ linux-libre-6.8-gnu/Documentation/maintainer/maintainer-entry-profile.rst
@@ -105,4 +105,4 @@ to do something different in the near future.
    ../driver-api/media/maintainer-entry-profile
    ../driver-api/vfio-pci-device-specific-driver-acceptance
    ../nvme/feature-and-quirk-policy
-   ../filesystems/xfs-maintainer-entry-profile
+   ../filesystems/xfs/xfs-maintainer-entry-profile
diff --git linux-libre-6.7-gnu/Documentation/memory-barriers.txt linux-libre-6.8-gnu/Documentation/memory-barriers.txt
index d414e145f912..4202174a6262 100644
--- linux-libre-6.7-gnu/Documentation/memory-barriers.txt
+++ linux-libre-6.8-gnu/Documentation/memory-barriers.txt
@@ -396,10 +396,11 @@ Memory barriers come in four basic varieties:
 
 
  (2) Address-dependency barriers (historical).
-     [!] This section is marked as HISTORICAL: For more up-to-date
-     information, including how compiler transformations related to pointer
-     comparisons can sometimes cause problems, see
-     Documentation/RCU/rcu_dereference.rst.
+     [!] This section is marked as HISTORICAL: it covers the long-obsolete
+     smp_read_barrier_depends() macro, the semantics of which are now
+     implicit in all marked accesses.  For more up-to-date information,
+     including how compiler transformations can sometimes break address
+     dependencies, see Documentation/RCU/rcu_dereference.rst.
 
      An address-dependency barrier is a weaker form of read barrier.  In the
      case where two loads are performed such that the second depends on the
@@ -560,9 +561,11 @@ There are certain things that the Linux kernel memory barriers do not guarantee:
 
 ADDRESS-DEPENDENCY BARRIERS (HISTORICAL)
 ----------------------------------------
-[!] This section is marked as HISTORICAL: For more up-to-date information,
-including how compiler transformations related to pointer comparisons can
-sometimes cause problems, see Documentation/RCU/rcu_dereference.rst.
+[!] This section is marked as HISTORICAL: it covers the long-obsolete
+smp_read_barrier_depends() macro, the semantics of which are now implicit
+in all marked accesses.  For more up-to-date information, including
+how compiler transformations can sometimes break address dependencies,
+see Documentation/RCU/rcu_dereference.rst.
 
 As of v4.15 of the Linux kernel, an smp_mb() was added to READ_ONCE() for
 DEC Alpha, which means that about the only people who need to pay attention
diff --git linux-libre-6.7-gnu/Documentation/misc-devices/index.rst linux-libre-6.8-gnu/Documentation/misc-devices/index.rst
index 7de16797987a..2d0ce9138588 100644
--- linux-libre-6.7-gnu/Documentation/misc-devices/index.rst
+++ linux-libre-6.8-gnu/Documentation/misc-devices/index.rst
@@ -7,11 +7,8 @@ Assorted Miscellaneous Devices Documentation
 This documentation contains information for assorted devices that do not
 fit into other categories.
 
-.. class:: toc-title
-
-	   Table of contents
-
 .. toctree::
+   :caption: Table of contents
    :maxdepth: 2
 
    ad525x_dpot
diff --git linux-libre-6.7-gnu/Documentation/mm/arch_pgtable_helpers.rst linux-libre-6.8-gnu/Documentation/mm/arch_pgtable_helpers.rst
index c82e3ee20e51..2466d3363af7 100644
--- linux-libre-6.7-gnu/Documentation/mm/arch_pgtable_helpers.rst
+++ linux-libre-6.8-gnu/Documentation/mm/arch_pgtable_helpers.rst
@@ -18,8 +18,6 @@ PTE Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pte_same                  | Tests whether both PTE entries are the same      |
 +---------------------------+--------------------------------------------------+
-| pte_bad                   | Tests a non-table mapped PTE                     |
-+---------------------------+--------------------------------------------------+
 | pte_present               | Tests a valid mapped PTE                         |
 +---------------------------+--------------------------------------------------+
 | pte_young                 | Tests a young PTE                                |
diff --git linux-libre-6.7-gnu/Documentation/mm/damon/design.rst linux-libre-6.8-gnu/Documentation/mm/damon/design.rst
index 1f7e0586b5fa..1bb69524a62e 100644
--- linux-libre-6.7-gnu/Documentation/mm/damon/design.rst
+++ linux-libre-6.8-gnu/Documentation/mm/damon/design.rst
@@ -5,6 +5,18 @@ Design
 ======
 
 
+.. _damon_design_execution_model_and_data_structures:
+
+Execution Model and Data Structures
+===================================
+
+The monitoring-related information including the monitoring request
+specification and DAMON-based operation schemes are stored in a data structure
+called DAMON ``context``.  DAMON executes each context with a kernel thread
+called ``kdamond``.  Multiple kdamonds could run in parallel, for different
+types of monitoring.
+
+
 Overall Architecture
 ====================
 
@@ -346,6 +358,19 @@ the weight will be respected are up to the underlying prioritization mechanism
 implementation.
 
 
+.. _damon_design_damos_quotas_auto_tuning:
+
+Aim-oriented Feedback-driven Auto-tuning
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Automatic feedback-driven quota tuning.  Instead of setting the absolute quota
+value, users can repeatedly provide numbers representing how much of their goal
+for the scheme is achieved as feedback.  DAMOS then automatically tunes the
+aggressiveness (the quota) of the corresponding scheme.  For example, if DAMOS
+is under achieving the goal, DAMOS automatically increases the quota.  If DAMOS
+is over achieving the goal, it decreases the quota.
+
+
 .. _damon_design_damos_watermarks:
 
 Watermarks
@@ -477,15 +502,3 @@ modules for proactive reclamation and LRU lists manipulation are provided.  For
 more detail, please read the usage documents for those
 (:doc:`/admin-guide/mm/damon/reclaim` and
 :doc:`/admin-guide/mm/damon/lru_sort`).
-
-
-.. _damon_design_execution_model_and_data_structures:
-
-Execution Model and Data Structures
-===================================
-
-The monitoring-related information including the monitoring request
-specification and DAMON-based operation schemes are stored in a data structure
-called DAMON ``context``.  DAMON executes each context with a kernel thread
-called ``kdamond``.  Multiple kdamonds could run in parallel, for different
-types of monitoring.
diff --git linux-libre-6.7-gnu/Documentation/mm/transhuge.rst linux-libre-6.8-gnu/Documentation/mm/transhuge.rst
index 9a607059ea11..93c9239b9ebe 100644
--- linux-libre-6.7-gnu/Documentation/mm/transhuge.rst
+++ linux-libre-6.8-gnu/Documentation/mm/transhuge.rst
@@ -117,7 +117,7 @@ pages:
 
   - map/unmap of a PMD entry for the whole THP increment/decrement
     folio->_entire_mapcount and also increment/decrement
-    folio->_nr_pages_mapped by COMPOUND_MAPPED when _entire_mapcount
+    folio->_nr_pages_mapped by ENTIRELY_MAPPED when _entire_mapcount
     goes from -1 to 0 or 0 to -1.
 
   - map/unmap of individual pages with PTE entry increment/decrement
@@ -156,7 +156,7 @@ Partial unmap and deferred_split_folio()
 
 Unmapping part of THP (with munmap() or other way) is not going to free
 memory immediately. Instead, we detect that a subpage of THP is not in use
-in page_remove_rmap() and queue the THP for splitting if memory pressure
+in folio_remove_rmap_*() and queue the THP for splitting if memory pressure
 comes. Splitting will free up unused subpages.
 
 Splitting the page right away is not an option due to locking context in
diff --git linux-libre-6.7-gnu/Documentation/mm/unevictable-lru.rst linux-libre-6.8-gnu/Documentation/mm/unevictable-lru.rst
index 67f1338440a5..b6a07a26b10d 100644
--- linux-libre-6.7-gnu/Documentation/mm/unevictable-lru.rst
+++ linux-libre-6.8-gnu/Documentation/mm/unevictable-lru.rst
@@ -486,7 +486,7 @@ munlock the pages if we're removing the last VM_LOCKED VMA that maps the pages.
 Before the unevictable/mlock changes, mlocking did not mark the pages in any
 way, so unmapping them required no processing.
 
-For each PTE (or PMD) being unmapped from a VMA, page_remove_rmap() calls
+For each PTE (or PMD) being unmapped from a VMA, folio_remove_rmap_*() calls
 munlock_vma_folio(), which calls munlock_folio() when the VMA is VM_LOCKED
 (unless it was a PTE mapping of a part of a transparent huge page).
 
@@ -511,7 +511,7 @@ userspace; truncation even unmaps and deletes any private anonymous pages
 which had been Copied-On-Write from the file pages now being truncated.
 
 Mlocked pages can be munlocked and deleted in this way: like with munmap(),
-for each PTE (or PMD) being unmapped from a VMA, page_remove_rmap() calls
+for each PTE (or PMD) being unmapped from a VMA, folio_remove_rmap_*() calls
 munlock_vma_folio(), which calls munlock_folio() when the VMA is VM_LOCKED
 (unless it was a PTE mapping of a part of a transparent huge page).
 
diff --git linux-libre-6.7-gnu/Documentation/netlink/netlink-raw.yaml linux-libre-6.8-gnu/Documentation/netlink/netlink-raw.yaml
index 775cce8c548a..04b92f1a5cd6 100644
--- linux-libre-6.7-gnu/Documentation/netlink/netlink-raw.yaml
+++ linux-libre-6.8-gnu/Documentation/netlink/netlink-raw.yaml
@@ -126,8 +126,10 @@ properties:
               name:
                 type: string
               type:
-                description: The netlink attribute type
-                enum: [ u8, u16, u32, u64, s8, s16, s32, s64, string, binary ]
+                description: |
+                  The netlink attribute type. Members of type 'binary' or 'pad'
+                  must also have the 'len' property set.
+                enum: [ u8, u16, u32, u64, s8, s16, s32, s64, string, binary, pad ]
               len:
                 $ref: '#/$defs/len-or-define'
               byte-order:
@@ -150,6 +152,14 @@ properties:
                   the right formatting mechanism when displaying values of this
                   type.
                 enum: [ hex, mac, fddi, ipv4, ipv6, uuid ]
+            if:
+              properties:
+                type:
+                  oneOf:
+                    - const: binary
+                    - const: pad
+            then:
+              required: [ len ]
         # End genetlink-legacy
 
   attribute-sets:
@@ -200,8 +210,10 @@ properties:
                 type: string
               type: &attr-type
                 description: The netlink attribute type
-                enum: [ unused, pad, flag, binary, u8, u16, u32, u64, s32, s64,
-                        string, nest, array-nest, nest-type-value ]
+                enum: [ unused, pad, flag, binary, bitfield32,
+                        u8, u16, u32, u64, s8, s16, s32, s64,
+                        string, nest, array-nest, nest-type-value,
+                        sub-message ]
               doc:
                 description: Documentation of the attribute.
                 type: string
@@ -260,6 +272,17 @@ properties:
                 description: Name of the struct type used for the attribute.
                 type: string
               # End genetlink-legacy
+              # Start netlink-raw
+              sub-message:
+                description: |
+                  Name of the sub-message definition to use for the attribute.
+                type: string
+              selector:
+                description: |
+                  Name of the attribute to use for dynamic selection of sub-message
+                  format specifier.
+                type: string
+              # End netlink-raw
 
       # Make sure name-prefix does not appear in subsets (subsets inherit naming)
       dependencies:
@@ -282,6 +305,43 @@ properties:
             items:
               required: [ type ]
 
+  # Start netlink-raw
+  sub-messages:
+    description: Definition of sub message attributes
+    type: array
+    items:
+      type: object
+      additionalProperties: False
+      required: [ name, formats ]
+      properties:
+        name:
+          description: Name of the sub-message definition
+          type: string
+        formats:
+          description: Dynamically selected format specifiers
+          type: array
+          items:
+            type: object
+            additionalProperties: False
+            required: [ value ]
+            properties:
+              value:
+                description: |
+                  Value to match for dynamic selection of sub-message format
+                  specifier.
+                type: string
+              fixed-header:
+                description: |
+                  Name of the struct definition to use as the fixed header
+                  for the sub message.
+                type: string
+              attribute-set:
+                description: |
+                  Name of the attribute space from which to resolve attributes
+                  in the sub message.
+                type: string
+  # End netlink-raw
+
   operations:
     description: Operations supported by the protocol.
     type: object
diff --git linux-libre-6.7-gnu/Documentation/netlink/specs/devlink.yaml linux-libre-6.8-gnu/Documentation/netlink/specs/devlink.yaml
index 572d83a414d0..cf6eaa0da821 100644
--- linux-libre-6.7-gnu/Documentation/netlink/specs/devlink.yaml
+++ linux-libre-6.8-gnu/Documentation/netlink/specs/devlink.yaml
@@ -75,6 +75,14 @@ definitions:
         name: ipsec-crypto-bit
       -
         name: ipsec-packet-bit
+  -
+    type: enum
+    name: rate-type
+    entries:
+      -
+        name: leaf
+      -
+        name: node
   -
     type: enum
     name: sb-threshold-type
@@ -111,6 +119,16 @@ definitions:
         name: none
       -
         name: basic
+  -
+    type: enum
+    name: dpipe-header-id
+    entries:
+      -
+        name: ethernet
+      -
+        name: ipv4
+      -
+        name: ipv6
   -
     type: enum
     name: dpipe-match-type
@@ -174,6 +192,16 @@ definitions:
         name: trap
       -
         name: mirror
+  -
+    type: enum
+    name: trap-type
+    entries:
+      -
+        name: drop
+      -
+        name: exception
+      -
+        name: control
 
 attribute-sets:
   -
@@ -194,27 +222,45 @@ attribute-sets:
         name: port-type
         type: u16
         enum: port-type
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: port-desired-type
+        type: u16
+      -
+        name: port-netdev-ifindex
+        type: u32
+      -
+        name: port-netdev-name
+        type: string
+      -
+        name: port-ibdev-name
+        type: string
       -
         name: port-split-count
         type: u32
-        value: 9
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: port-split-group
+        type: u32
       -
         name: sb-index
         type: u32
-        value: 11
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: sb-size
+        type: u32
+      -
+        name: sb-ingress-pool-count
+        type: u16
+      -
+        name: sb-egress-pool-count
+        type: u16
+      -
+        name: sb-ingress-tc-count
+        type: u16
+      -
+        name: sb-egress-tc-count
+        type: u16
       -
         name: sb-pool-index
         type: u16
-        value: 17
       -
         name: sb-pool-type
         type: u8
@@ -232,16 +278,16 @@ attribute-sets:
       -
         name: sb-tc-index
         type: u16
-        value: 22
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: sb-occ-cur
+        type: u32
+      -
+        name: sb-occ-max
+        type: u32
       -
         name: eswitch-mode
         type: u16
-        value: 25
         enum: eswitch-mode
-
       -
         name: eswitch-inline-mode
         type: u16
@@ -347,6 +393,7 @@ attribute-sets:
       -
         name: dpipe-header-id
         type: u32
+        enum: dpipe-header-id
       -
         name: dpipe-header-fields
         type: nest
@@ -381,7 +428,6 @@ attribute-sets:
       -
         name: eswitch-encap-mode
         type: u8
-        value: 62
         enum: eswitch-encap-mode
       -
         name: resource-list
@@ -433,20 +479,25 @@ attribute-sets:
         name: port-flavour
         type: u16
         enum: port-flavour
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: port-number
+        type: u32
+      -
+        name: port-split-subport-number
+        type: u32
+      -
+        name: param
+        type: nest
+        nested-attributes: dl-param
       -
         name: param-name
         type: string
-        value: 81
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: param-generic
+        type: flag
       -
         name: param-type
         type: u8
-        value: 83
 
       # TODO: fill in the attributes in between
 
@@ -458,20 +509,34 @@ attribute-sets:
       -
         name: region-name
         type: string
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: region-size
+        type: u64
+      -
+        name: region-snapshots
+        type: nest
+        nested-attributes: dl-region-snapshots
+      -
+        name: region-snapshot
+        type: nest
+        nested-attributes: dl-region-snapshot
       -
         name: region-snapshot-id
         type: u32
-        value: 92
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: region-chunks
+        type: nest
+        nested-attributes: dl-region-chunks
+      -
+        name: region-chunk
+        type: nest
+        nested-attributes: dl-region-chunk
+      -
+        name: region-chunk-data
+        type: binary
       -
         name: region-chunk-addr
         type: u64
-        value: 96
       -
         name: region-chunk-len
         type: u64
@@ -502,14 +567,13 @@ attribute-sets:
       -
         name: info-version-value
         type: string
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: sb-pool-cell-size
+        type: u32
       -
         name: fmsg
         type: nest
         nested-attributes: dl-fmsg
-        value: 106
       -
         name: fmsg-obj-nest-start
         type: flag
@@ -525,20 +589,35 @@ attribute-sets:
       -
         name: fmsg-obj-name
         type: string
+      -
+        name: fmsg-obj-value-type
+        type: u8
 
       # TODO: fill in the attributes in between
 
+      -
+        name: health-reporter
+        type: nest
+        value: 114
+        nested-attributes: dl-health-reporter
       -
         name: health-reporter-name
         type: string
-        value: 115
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: health-reporter-state
+        type: u8
+      -
+        name: health-reporter-err-count
+        type: u64
+      -
+        name: health-reporter-recover-count
+        type: u64
+      -
+        name: health-reporter-dump-ts
+        type: u64
       -
         name: health-reporter-graceful-period
         type: u64
-        value: 120
       -
         name: health-reporter-auto-recover
         type: u8
@@ -548,55 +627,64 @@ attribute-sets:
       -
         name: flash-update-component
         type: string
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: flash-update-status-msg
+        type: string
+      -
+        name: flash-update-status-done
+        type: u64
+      -
+        name: flash-update-status-total
+        type: u64
       -
         name: port-pci-pf-number
         type: u16
-        value: 127
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: port-pci-vf-number
+        type: u16
+      -
+        name: stats
+        type: nest
+        nested-attributes: dl-attr-stats
       -
         name: trap-name
         type: string
-        value: 130
       -
         name: trap-action
         type: u8
         enum: trap-action
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: trap-type
+        type: u8
+        enum: trap-type
+      -
+        name: trap-generic
+        type: flag
+      -
+        name: trap-metadata
+        type: nest
+        nested-attributes: dl-trap-metadata
       -
         name: trap-group-name
         type: string
-        value: 135
-
       -
         name: reload-failed
         type: u8
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: health-reporter-dump-ts-ns
+        type: u64
       -
         name: netns-fd
         type: u32
-        value: 138
       -
         name: netns-pid
         type: u32
       -
         name: netns-id
         type: u32
-
-      # TODO: fill in the attributes in between
-
       -
         name: health-reporter-auto-dump
         type: u8
-        value: 141
       -
         name: trap-policer-id
         type: u32
@@ -610,22 +698,29 @@ attribute-sets:
         name: port-function
         type: nest
         nested-attributes: dl-port-function
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: info-board-serial-number
+        type: string
+      -
+        name: port-lanes
+        type: u32
+      -
+        name: port-splittable
+        type: u8
+      -
+        name: port-external
+        type: u8
       -
         name: port-controller-number
         type: u32
-        value: 150
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: flash-update-status-timeout
+        type: u64
       -
         name: flash-update-overwrite-mask
         type: bitfield32
         enum: flash-overwrite
         enum-as-flags: True
-        value: 152
       -
         name: reload-action
         type: u8
@@ -673,20 +768,16 @@ attribute-sets:
         type: nest
         multi-attr: true
         nested-attributes: dl-reload-act-stats
-
-      # TODO: fill in the attributes in between
-
       -
         name: port-pci-sf-number
         type: u32
-        value: 164
-
-      # TODO: fill in the attributes in between
-
+      -
+        name: rate-type
+        type: u16
+        enum: rate-type
       -
         name: rate-tx-share
         type: u64
-        value: 166
       -
         name: rate-tx-max
         type: u64
@@ -696,20 +787,22 @@ attribute-sets:
       -
         name: rate-parent-node-name
         type: string
-
-      # TODO: fill in the attributes in between
-
+      -
+         name: region-max-snapshots
+         type: u32
       -
         name: linecard-index
         type: u32
-        value: 171
-
-      # TODO: fill in the attributes in between
-
+      -
+         name: linecard-state
+         type: u8
       -
         name: linecard-type
         type: string
-        value: 173
+      -
+        name: linecard-supported-types
+        type: nest
+        nested-attributes: dl-linecard-supported-types
 
       # TODO: fill in the attributes in between
 
@@ -736,12 +829,14 @@ attribute-sets:
         name: reload-stats
       -
         name: remote-reload-stats
+
   -
     name: dl-reload-stats
     subset-of: devlink
     attributes:
       -
         name: reload-action-info
+
   -
     name: dl-reload-act-info
     subset-of: devlink
@@ -750,12 +845,14 @@ attribute-sets:
         name: reload-action
       -
         name: reload-action-stats
+
   -
     name: dl-reload-act-stats
     subset-of: devlink
     attributes:
       -
         name: reload-stats-entry
+
   -
     name: dl-reload-stats-entry
     subset-of: devlink
@@ -764,6 +861,7 @@ attribute-sets:
         name: reload-stats-limit
       -
         name: reload-stats-value
+
   -
     name: dl-info-version
     subset-of: devlink
@@ -772,6 +870,7 @@ attribute-sets:
         name: info-version-name
       -
         name: info-version-value
+
   -
     name: dl-port-function
     name-prefix: devlink-port-fn-attr-
@@ -1005,6 +1104,49 @@ attribute-sets:
       -
         name: resource
 
+  -
+    name: dl-param
+    subset-of: devlink
+    attributes:
+      -
+        name: param-name
+      -
+        name: param-generic
+      -
+        name: param-type
+
+      # TODO: fill in the attribute param-value-list
+
+  -
+    name: dl-region-snapshots
+    subset-of: devlink
+    attributes:
+      -
+        name: region-snapshot
+
+  -
+    name: dl-region-snapshot
+    subset-of: devlink
+    attributes:
+      -
+        name: region-snapshot-id
+
+  -
+    name: dl-region-chunks
+    subset-of: devlink
+    attributes:
+      -
+        name: region-chunk
+
+  -
+    name: dl-region-chunk
+    subset-of: devlink
+    attributes:
+      -
+        name: region-chunk-data
+      -
+        name: region-chunk-addr
+
   -
     name: dl-fmsg
     subset-of: devlink
@@ -1020,6 +1162,62 @@ attribute-sets:
       -
         name: fmsg-obj-name
 
+  -
+    name: dl-health-reporter
+    subset-of: devlink
+    attributes:
+      -
+        name: health-reporter-name
+      -
+        name: health-reporter-state
+      -
+        name: health-reporter-err-count
+      -
+        name: health-reporter-recover-count
+      -
+        name: health-reporter-graceful-period
+      -
+        name: health-reporter-auto-recover
+      -
+        name: health-reporter-dump-ts
+      -
+        name: health-reporter-dump-ts-ns
+      -
+        name: health-reporter-auto-dump
+
+  -
+    name: dl-attr-stats
+    name-prefix: devlink-attr-
+    attributes:
+      - name: stats-rx-packets
+        type: u64
+        value: 0
+      -
+        name: stats-rx-bytes
+        type: u64
+      -
+        name: stats-rx-dropped
+        type: u64
+
+  -
+    name: dl-trap-metadata
+    name-prefix: devlink-attr-
+    attributes:
+      -
+        name: trap-metadata-type-in-port
+        type: flag
+        value: 0
+      -
+        name: trap-metadata-type-fa-cookie
+        type: flag
+
+  -
+    name: dl-linecard-supported-types
+    subset-of: devlink
+    attributes:
+      -
+        name: linecard-type
+
   -
     name: dl-selftest-id
     name-prefix: devlink-attr-selftest-id-
@@ -1077,6 +1275,7 @@ operations:
         reply:
           value: 3  # due to a bug, port dump returns DEVLINK_CMD_NEW
           attributes: *port-id-attrs
+
     -
       name: port-set
       doc: Set devlink port instances.
@@ -1484,8 +1683,8 @@ operations:
       dont-validate: [ strict ]
       flags: [ admin-perm ]
       do:
-        pre: devlink-nl-pre-doit
-        post: devlink-nl-post-doit
+        pre: devlink-nl-pre-doit-dev-lock
+        post: devlink-nl-post-doit-dev-lock
         request:
           attributes:
             - bus-name
@@ -2055,3 +2254,14 @@ operations:
             - bus-name
             - dev-name
             - selftests
+
+    -
+      name: notify-filter-set
+      doc: Set notification messages socket filter.
+      attribute-set: devlink
+      do:
+        request:
+          attributes:
+            - bus-name
+            - dev-name
+            - port-index
diff --git linux-libre-6.7-gnu/Documentation/netlink/specs/dpll.yaml linux-libre-6.8-gnu/Documentation/netlink/specs/dpll.yaml
index cf8abe1c0550..3dcc9ece272a 100644
--- linux-libre-6.7-gnu/Documentation/netlink/specs/dpll.yaml
+++ linux-libre-6.8-gnu/Documentation/netlink/specs/dpll.yaml
@@ -296,6 +296,16 @@ attribute-sets:
       -
         name: phase-offset
         type: s64
+      -
+        name: fractional-frequency-offset
+        type: sint
+        doc: |
+          The FFO (Fractional Frequency Offset) between the RX and TX
+          symbol rate on the media associated with the pin:
+          (rx_frequency-tx_frequency)/rx_frequency
+          Value is in PPM (parts per million).
+          This may be implemented for example for pin of type
+          PIN_TYPE_SYNCE_ETH_PORT.
   -
     name: pin-parent-device
     subset-of: pin
@@ -374,8 +384,6 @@ operations:
             - type
 
       dump:
-        pre: dpll-lock-dumpit
-        post: dpll-unlock-dumpit
         reply: *dev-attrs
 
     -
@@ -460,10 +468,9 @@ operations:
             - phase-adjust-min
             - phase-adjust-max
             - phase-adjust
+            - fractional-frequency-offset
 
       dump:
-        pre: dpll-lock-dumpit
-        post: dpll-unlock-dumpit
         request:
           attributes:
             - id
diff --git linux-libre-6.7-gnu/Documentation/netlink/specs/ethtool.yaml linux-libre-6.8-gnu/Documentation/netlink/specs/ethtool.yaml
index 5c7a65b009b4..197208f419dc 100644
--- linux-libre-6.7-gnu/Documentation/netlink/specs/ethtool.yaml
+++ linux-libre-6.8-gnu/Documentation/netlink/specs/ethtool.yaml
@@ -908,6 +908,9 @@ attribute-sets:
       -
         name: hkey
         type: binary
+      -
+        name: input_xfrm
+        type: u32
   -
     name: plca
     attributes:
@@ -1598,6 +1601,7 @@ operations:
             - hfunc
             - indir
             - hkey
+            - input_xfrm
       dump: *rss-get-op
     -
       name: plca-get-cfg
diff --git linux-libre-6.7-gnu/Documentation/netlink/specs/mptcp.yaml linux-libre-6.8-gnu/Documentation/netlink/specs/mptcp_pm.yaml
similarity index 100%
rename from Documentation/netlink/specs/mptcp.yaml
rename to Documentation/netlink/specs/mptcp_pm.yaml
diff --git linux-libre-6.7-gnu/Documentation/netlink/specs/netdev.yaml linux-libre-6.8-gnu/Documentation/netlink/specs/netdev.yaml
index 14511b13f305..3addac970680 100644
--- linux-libre-6.7-gnu/Documentation/netlink/specs/netdev.yaml
+++ linux-libre-6.8-gnu/Documentation/netlink/specs/netdev.yaml
@@ -45,7 +45,6 @@ definitions:
   -
     type: flags
     name: xdp-rx-metadata
-    render-max: true
     entries:
       -
         name: timestamp
@@ -55,6 +54,26 @@ definitions:
         name: hash
         doc:
           Device is capable of exposing receive packet hash via bpf_xdp_metadata_rx_hash().
+      -
+        name: vlan-tag
+        doc:
+          Device is capable of exposing receive packet VLAN tag via bpf_xdp_metadata_rx_vlan_tag().
+  -
+    type: flags
+    name: xsk-flags
+    entries:
+      -
+        name: tx-timestamp
+        doc:
+          HW timestamping egress packets is supported by the driver.
+      -
+        name: tx-checksum
+        doc:
+          L3 checksum HW offload is supported by the driver.
+  -
+    name: queue-type
+    type: enum
+    entries: [ rx, tx ]
 
 attribute-sets:
   -
@@ -86,6 +105,165 @@ attribute-sets:
              See Documentation/networking/xdp-rx-metadata.rst for more details.
         type: u64
         enum: xdp-rx-metadata
+      -
+        name: xsk-features
+        doc: Bitmask of enabled AF_XDP features.
+        type: u64
+        enum: xsk-flags
+  -
+    name: page-pool
+    attributes:
+      -
+        name: id
+        doc: Unique ID of a Page Pool instance.
+        type: uint
+        checks:
+          min: 1
+          max: u32-max
+      -
+        name: ifindex
+        doc: |
+          ifindex of the netdev to which the pool belongs.
+          May be reported as 0 if the page pool was allocated for a netdev
+          which got destroyed already (page pools may outlast their netdevs
+          because they wait for all memory to be returned).
+        type: u32
+        checks:
+          min: 1
+          max: s32-max
+      -
+        name: napi-id
+        doc: Id of NAPI using this Page Pool instance.
+        type: uint
+        checks:
+          min: 1
+          max: u32-max
+      -
+        name: inflight
+        type: uint
+        doc: |
+          Number of outstanding references to this page pool (allocated
+          but yet to be freed pages). Allocated pages may be held in
+          socket receive queues, driver receive ring, page pool recycling
+          ring, the page pool cache, etc.
+      -
+        name: inflight-mem
+        type: uint
+        doc: |
+          Amount of memory held by inflight pages.
+      -
+        name: detach-time
+        type: uint
+        doc: |
+          Seconds in CLOCK_BOOTTIME of when Page Pool was detached by
+          the driver. Once detached Page Pool can no longer be used to
+          allocate memory.
+          Page Pools wait for all the memory allocated from them to be freed
+          before truly disappearing. "Detached" Page Pools cannot be
+          "re-attached", they are just waiting to disappear.
+          Attribute is absent if Page Pool has not been detached, and
+          can still be used to allocate new memory.
+  -
+    name: page-pool-info
+    subset-of: page-pool
+    attributes:
+      -
+        name: id
+      -
+        name: ifindex
+  -
+    name: page-pool-stats
+    doc: |
+      Page pool statistics, see docs for struct page_pool_stats
+      for information about individual statistics.
+    attributes:
+      -
+        name: info
+        doc: Page pool identifying information.
+        type: nest
+        nested-attributes: page-pool-info
+      -
+        name: alloc-fast
+        type: uint
+        value: 8 # reserve some attr ids in case we need more metadata later
+      -
+        name: alloc-slow
+        type: uint
+      -
+        name: alloc-slow-high-order
+        type: uint
+      -
+        name: alloc-empty
+        type: uint
+      -
+        name: alloc-refill
+        type: uint
+      -
+        name: alloc-waive
+        type: uint
+      -
+        name: recycle-cached
+        type: uint
+      -
+        name: recycle-cache-full
+        type: uint
+      -
+        name: recycle-ring
+        type: uint
+      -
+        name: recycle-ring-full
+        type: uint
+      -
+        name: recycle-released-refcnt
+        type: uint
+
+  -
+    name: napi
+    attributes:
+      -
+        name: ifindex
+        doc: ifindex of the netdevice to which NAPI instance belongs.
+        type: u32
+        checks:
+          min: 1
+      -
+        name: id
+        doc: ID of the NAPI instance.
+        type: u32
+      -
+        name: irq
+        doc: The associated interrupt vector number for the napi
+        type: u32
+      -
+        name: pid
+        doc: PID of the napi thread, if NAPI is configured to operate in
+             threaded mode. If NAPI is not in threaded mode (i.e. uses normal
+             softirq context), the attribute will be absent.
+        type: u32
+  -
+    name: queue
+    attributes:
+      -
+        name: id
+        doc: Queue index; most queue types are indexed like a C array, with
+             indexes starting at 0 and ending at queue count - 1. Queue indexes
+             are scoped to an interface and queue type.
+        type: u32
+      -
+        name: ifindex
+        doc: ifindex of the netdevice to which the queue belongs.
+        type: u32
+        checks:
+          min: 1
+      -
+        name: type
+        doc: Queue type as rx, tx. Each queue type defines a separate ID space.
+        type: u32
+        enum: queue-type
+      -
+        name: napi-id
+        doc: ID of the NAPI instance which services this queue.
+        type: u32
 
 operations:
   list:
@@ -103,6 +281,7 @@ operations:
             - xdp-features
             - xdp-zc-max-segs
             - xdp-rx-metadata-features
+            - xsk-features
       dump:
         reply: *dev-all
     -
@@ -120,8 +299,116 @@ operations:
       doc: Notification about device configuration being changed.
       notify: dev-get
       mcgrp: mgmt
+    -
+      name: page-pool-get
+      doc: |
+        Get / dump information about Page Pools.
+        (Only Page Pools associated with a net_device can be listed.)
+      attribute-set: page-pool
+      do:
+        request:
+          attributes:
+            - id
+        reply: &pp-reply
+          attributes:
+            - id
+            - ifindex
+            - napi-id
+            - inflight
+            - inflight-mem
+            - detach-time
+      dump:
+        reply: *pp-reply
+      config-cond: page-pool
+    -
+      name: page-pool-add-ntf
+      doc: Notification about page pool appearing.
+      notify: page-pool-get
+      mcgrp: page-pool
+      config-cond: page-pool
+    -
+      name: page-pool-del-ntf
+      doc: Notification about page pool disappearing.
+      notify: page-pool-get
+      mcgrp: page-pool
+      config-cond: page-pool
+    -
+      name: page-pool-change-ntf
+      doc: Notification about page pool configuration being changed.
+      notify: page-pool-get
+      mcgrp: page-pool
+      config-cond: page-pool
+    -
+      name: page-pool-stats-get
+      doc: Get page pool statistics.
+      attribute-set: page-pool-stats
+      do:
+        request:
+          attributes:
+            - info
+        reply: &pp-stats-reply
+          attributes:
+            - info
+            - alloc-fast
+            - alloc-slow
+            - alloc-slow-high-order
+            - alloc-empty
+            - alloc-refill
+            - alloc-waive
+            - recycle-cached
+            - recycle-cache-full
+            - recycle-ring
+            - recycle-ring-full
+            - recycle-released-refcnt
+      dump:
+        reply: *pp-stats-reply
+      config-cond: page-pool-stats
+    -
+      name: queue-get
+      doc: Get queue information from the kernel.
+           Only configured queues will be reported (as opposed to all available
+           hardware queues).
+      attribute-set: queue
+      do:
+        request:
+          attributes:
+            - ifindex
+            - type
+            - id
+        reply: &queue-get-op
+          attributes:
+            - id
+            - type
+            - napi-id
+            - ifindex
+      dump:
+        request:
+          attributes:
+            - ifindex
+        reply: *queue-get-op
+    -
+      name: napi-get
+      doc: Get information about NAPI instances configured on the system.
+      attribute-set: napi
+      do:
+        request:
+          attributes:
+            - id
+        reply: &napi-get-op
+          attributes:
+            - id
+            - ifindex
+            - irq
+            - pid
+      dump:
+        request:
+          attributes:
+            - ifindex
+        reply: *napi-get-op
 
 mcast-groups:
   list:
     -
       name: mgmt
+    -
+      name: page-pool
diff --git linux-libre-6.7-gnu/Documentation/netlink/specs/ovs_datapath.yaml linux-libre-6.8-gnu/Documentation/netlink/specs/ovs_datapath.yaml
index f709c26c3e92..edc8c95ca6f5 100644
--- linux-libre-6.7-gnu/Documentation/netlink/specs/ovs_datapath.yaml
+++ linux-libre-6.8-gnu/Documentation/netlink/specs/ovs_datapath.yaml
@@ -20,6 +20,7 @@ definitions:
     name: user-features
     type: flags
     name-prefix: ovs-dp-f-
+    enum-name:
     entries:
       -
         name: unaligned
@@ -142,7 +143,6 @@ operations:
       do:
         request:
           attributes:
-            - dp-ifindex
             - name
             - upcall-pid
             - user-features
@@ -154,7 +154,6 @@ operations:
       do:
         request:
           attributes:
-            - dp-ifindex
             - name
 
 mcast-groups:
diff --git linux-libre-6.7-gnu/Documentation/netlink/specs/ovs_flow.yaml linux-libre-6.8-gnu/Documentation/netlink/specs/ovs_flow.yaml
index 109ca1f57b6c..4fdfc6b5cae9 100644
--- linux-libre-6.7-gnu/Documentation/netlink/specs/ovs_flow.yaml
+++ linux-libre-6.8-gnu/Documentation/netlink/specs/ovs_flow.yaml
@@ -124,6 +124,7 @@ definitions:
   -
     name: ovs-frag-type
     name-prefix: ovs-frag-type-
+    enum-name: ovs-frag-type
     type: enum
     entries:
       -
@@ -269,6 +270,7 @@ definitions:
   -
     name: ovs-ufid-flags
     name-prefix: ovs-ufid-f-
+    enum-name:
     type: flags
     entries:
       - omit-key
@@ -288,6 +290,7 @@ definitions:
         doc: Basis used for computing hash.
   -
     name: ovs-hash-alg
+    enum-name: ovs-hash-alg
     type: enum
     doc: |
       Data path hash algorithm for computing Datapath hash. The algorithm type only specifies
@@ -339,6 +342,7 @@ definitions:
           MPLS tunnel attributes.
   -
     name: ct-state-flags
+    enum-name:
     type: flags
     name-prefix: ovs-cs-f-
     entries:
@@ -947,13 +951,11 @@ operations:
       do: &flow-get-op
         request:
           attributes:
-            - dp-ifindex
             - key
             - ufid
             - ufid-flags
         reply:
           attributes:
-            - dp-ifindex
             - key
             - ufid
             - mask
@@ -968,7 +970,6 @@ operations:
       do:
         request:
           attributes:
-            - dp-ifindex
             - key
             - ufid
             - mask
diff --git linux-libre-6.7-gnu/Documentation/netlink/specs/ovs_vport.yaml linux-libre-6.8-gnu/Documentation/netlink/specs/ovs_vport.yaml
index f65ce62cd60d..86ba9ac2a521 100644
--- linux-libre-6.7-gnu/Documentation/netlink/specs/ovs_vport.yaml
+++ linux-libre-6.8-gnu/Documentation/netlink/specs/ovs_vport.yaml
@@ -135,7 +135,6 @@ operations:
             - name
             - type
             - upcall-pid
-            - dp-ifindex
             - ifindex
             - options
     -
@@ -146,7 +145,6 @@ operations:
       do:
         request:
           attributes:
-            - dp-ifindex
             - port-no
             - type
             - name
@@ -158,11 +156,9 @@ operations:
       do: &vport-get-op
         request:
           attributes:
-            - dp-ifindex
             - name
         reply: &dev-all
           attributes:
-            - dp-ifindex
             - port-no
             - type
             - name
diff --git linux-libre-6.7-gnu/Documentation/netlink/specs/rt_link.yaml linux-libre-6.8-gnu/Documentation/netlink/specs/rt_link.yaml
index d86a68f8475c..8e4d19adee8c 100644
--- linux-libre-6.7-gnu/Documentation/netlink/specs/rt_link.yaml
+++ linux-libre-6.8-gnu/Documentation/netlink/specs/rt_link.yaml
@@ -66,8 +66,9 @@ definitions:
         name: ifi-family
         type: u8
       -
-        name: padding
-        type: u8
+        name: pad
+        type: pad
+        len: 1
       -
         name: ifi-type
         type: u16
@@ -82,6 +83,18 @@ definitions:
       -
         name: ifi-change
         type: u32
+  -
+    name: ifla-bridge-id
+    type: struct
+    members:
+      -
+        name: prio
+        type: u16
+      -
+        name: addr
+        type: binary
+        len: 6
+        display-hint: mac
   -
     name: ifla-cacheinfo
     type: struct
@@ -707,11 +720,9 @@ definitions:
         name: family
         type: u8
       -
-        name: pad1
-        type: u8
-      -
-        name: pad2
-        type: u16
+        name: pad
+        type: pad
+        len: 3
       -
         name: ifindex
         type: u32
@@ -931,6 +942,10 @@ attribute-sets:
       -
         name: gro-ipv4-max-size
         type: u32
+      -
+        name: dpll-pin
+        type: nest
+        nested-attributes: link-dpll-pin-attrs
   -
     name: af-spec-attrs
     attributes:
@@ -966,8 +981,9 @@ attribute-sets:
         type: string
       -
         name: data
-        type: binary
-        # kind specific nest, e.g. linkinfo-bridge-attrs
+        type: sub-message
+        sub-message: linkinfo-data-msg
+        selector: kind
       -
         name: xstats
         type: binary
@@ -976,10 +992,12 @@ attribute-sets:
         type: string
       -
         name: slave-data
-        type: binary
-        # kind specific nest
+        type: sub-message
+        sub-message: linkinfo-member-data-msg
+        selector: slave-kind
   -
     name: linkinfo-bridge-attrs
+    name-prefix: ifla-br-
     attributes:
       -
         name: forward-delay
@@ -1011,9 +1029,11 @@ attribute-sets:
       -
         name: root-id
         type: binary
+        struct: ifla-bridge-id
       -
         name: bridge-id
         type: binary
+        struct: ifla-bridge-id
       -
         name: root-port
         type: u16
@@ -1041,6 +1061,7 @@ attribute-sets:
       -
         name: group-addr
         type: binary
+        display-hint: mac
       -
         name: fdb-flush
         type: binary
@@ -1123,6 +1144,376 @@ attribute-sets:
       -
         name: mcast-querier-state
         type: binary
+  -
+    name: linkinfo-brport-attrs
+    name-prefix: ifla-brport-
+    attributes:
+      -
+        name: state
+        type: u8
+      -
+        name: priority
+        type: u16
+      -
+        name: cost
+        type: u32
+      -
+        name: mode
+        type: flag
+      -
+        name: guard
+        type: flag
+      -
+        name: protect
+        type: flag
+      -
+        name: fast-leave
+        type: flag
+      -
+        name: learning
+        type: flag
+      -
+        name: unicast-flood
+        type: flag
+      -
+        name: proxyarp
+        type: flag
+      -
+        name: learning-sync
+        type: flag
+      -
+        name: proxyarp-wifi
+        type: flag
+      -
+        name: root-id
+        type: binary
+        struct: ifla-bridge-id
+      -
+        name: bridge-id
+        type: binary
+        struct: ifla-bridge-id
+      -
+        name: designated-port
+        type: u16
+      -
+        name: designated-cost
+        type: u16
+      -
+        name: id
+        type: u16
+      -
+        name: "no"
+        type: u16
+      -
+        name: topology-change-ack
+        type: u8
+      -
+        name: config-pending
+        type: u8
+      -
+        name: message-age-timer
+        type: u64
+      -
+        name: forward-delay-timer
+        type: u64
+      -
+        name: hold-timer
+        type: u64
+      -
+        name: flush
+        type: flag
+      -
+        name: multicast-router
+        type: u8
+      -
+        name: pad
+        type: pad
+      -
+        name: mcast-flood
+        type: flag
+      -
+        name: mcast-to-ucast
+        type: flag
+      -
+        name: vlan-tunnel
+        type: flag
+      -
+        name: bcast-flood
+        type: flag
+      -
+        name: group-fwd-mask
+        type: u16
+      -
+        name: neigh-suppress
+        type: flag
+      -
+        name: isolated
+        type: flag
+      -
+        name: backup-port
+        type: u32
+      -
+        name: mrp-ring-open
+        type: flag
+      -
+        name: mrp-in-open
+        type: flag
+      -
+        name: mcast-eht-hosts-limit
+        type: u32
+      -
+        name: mcast-eht-hosts-cnt
+        type: u32
+      -
+        name: locked
+        type: flag
+      -
+        name: mab
+        type: flag
+      -
+        name: mcast-n-groups
+        type: u32
+      -
+        name: mcast-max-groups
+        type: u32
+      -
+        name: neigh-vlan-suppress
+        type: flag
+      -
+        name: backup-nhid
+        type: u32
+  -
+    name: linkinfo-gre-attrs
+    name-prefix: ifla-gre-
+    attributes:
+      -
+        name: link
+        type: u32
+      -
+        name: iflags
+        type: u16
+      -
+        name: oflags
+        type: u16
+      -
+        name: ikey
+        type: u32
+      -
+        name: okey
+        type: u32
+      -
+        name: local
+        type: binary
+        display-hint: ipv4
+      -
+        name: remote
+        type: binary
+        display-hint: ipv4
+      -
+        name: ttl
+        type: u8
+      -
+        name: tos
+        type: u8
+      -
+        name: pmtudisc
+        type: u8
+      -
+        name: encap-limit
+        type: u32
+      -
+        name: flowinfo
+        type: u32
+      -
+        name: flags
+        type: u32
+      -
+        name: encap-type
+        type: u16
+      -
+        name: encap-flags
+        type: u16
+      -
+        name: encap-sport
+        type: u16
+      -
+        name: encap-dport
+        type: u16
+      -
+        name: collect-metadata
+        type: flag
+      -
+        name: ignore-df
+        type: u8
+      -
+        name: fwmark
+        type: u32
+      -
+        name: erspan-index
+        type: u32
+      -
+        name: erspan-ver
+        type: u8
+      -
+        name: erspan-dir
+        type: u8
+      -
+        name: erspan-hwid
+        type: u16
+  -
+    name: linkinfo-geneve-attrs
+    name-prefix: ifla-geneve-
+    attributes:
+      -
+        name: id
+        type: u32
+      -
+        name: remote
+        type: binary
+        display-hint: ipv4
+      -
+        name: ttl
+        type: u8
+      -
+        name: tos
+        type: u8
+      -
+        name: port
+        type: u16
+      -
+        name: collect-metadata
+        type: flag
+      -
+        name: remote6
+        type: binary
+        display-hint: ipv6
+      -
+        name: udp-csum
+        type: u8
+      -
+        name: udp-zero-csum6-tx
+        type: u8
+      -
+        name: udp-zero-csum6-rx
+        type: u8
+      -
+        name: label
+        type: u32
+      -
+        name: ttl-inherit
+        type: u8
+      -
+        name: df
+        type: u8
+      -
+        name: inner-proto-inherit
+        type: flag
+  -
+    name: linkinfo-iptun-attrs
+    name-prefix: ifla-iptun-
+    attributes:
+      -
+        name: link
+        type: u32
+      -
+        name: local
+        type: binary
+        display-hint: ipv4
+      -
+        name: remote
+        type: binary
+        display-hint: ipv4
+      -
+        name: ttl
+        type: u8
+      -
+        name: tos
+        type: u8
+      -
+        name: encap-limit
+        type: u8
+      -
+        name: flowinfo
+        type: u32
+      -
+        name: flags
+        type: u16
+      -
+        name: proto
+        type: u8
+      -
+        name: pmtudisc
+        type: u8
+      -
+        name: 6rd-prefix
+        type: binary
+        display-hint: ipv6
+      -
+        name: 6rd-relay-prefix
+        type: binary
+        display-hint: ipv4
+      -
+        name: 6rd-prefixlen
+        type: u16
+      -
+        name: 6rd-relay-prefixlen
+        type: u16
+      -
+        name: encap-type
+        type: u16
+      -
+        name: encap-flags
+        type: u16
+      -
+        name: encap-sport
+        type: u16
+      -
+        name: encap-dport
+        type: u16
+      -
+        name: collect-metadata
+        type: flag
+      -
+        name: fwmark
+        type: u32
+  -
+    name: linkinfo-tun-attrs
+    name-prefix: ifla-tun-
+    attributes:
+      -
+        name: owner
+        type: u32
+      -
+        name: group
+        type: u32
+      -
+        name: type
+        type: u8
+      -
+        name: pi
+        type: u8
+      -
+        name: vnet-hdr
+        type: u8
+      -
+        name: persist
+        type: u8
+      -
+        name: multi-queue
+        type: u8
+      -
+        name: num-queues
+        type: u32
+      -
+        name: num-disabled-queues
+        type: u32
+  -
+    name: linkinfo-vrf-attrs
+    name-prefix: ifla-vrf-
+    attributes:
+      -
+        name: table
+        type: u32
   -
     name: xdp-attrs
     attributes:
@@ -1240,6 +1631,52 @@ attribute-sets:
       -
         name: used
         type: u8
+  -
+    name: link-dpll-pin-attrs
+    attributes:
+      -
+        name: id
+        type: u32
+
+sub-messages:
+  -
+    name: linkinfo-data-msg
+    formats:
+      -
+        value: bridge
+        attribute-set: linkinfo-bridge-attrs
+      -
+        value: erspan
+        attribute-set: linkinfo-gre-attrs
+      -
+        value: gre
+        attribute-set: linkinfo-gre-attrs
+      -
+        value: gretap
+        attribute-set: linkinfo-gre-attrs
+      -
+        value: geneve
+        attribute-set: linkinfo-geneve-attrs
+      -
+        value: ipip
+        attribute-set: linkinfo-iptun-attrs
+      -
+        value: sit
+        attribute-set: linkinfo-iptun-attrs
+      -
+        value: tun
+        attribute-set: linkinfo-tun-attrs
+      -
+        value: vrf
+        attribute-set: linkinfo-vrf-attrs
+  -
+    name: linkinfo-member-data-msg
+    formats:
+      -
+        value: bridge
+        attribute-set: linkinfo-brport-attrs
+      -
+        value: bond
 
 operations:
   enum-model: directional
diff --git linux-libre-6.7-gnu/Documentation/netlink/specs/tc.yaml linux-libre-6.8-gnu/Documentation/netlink/specs/tc.yaml
new file mode 100644
index 000000000000..4346fa402fc9
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/netlink/specs/tc.yaml
@@ -0,0 +1,2031 @@
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+
+name: tc
+protocol: netlink-raw
+protonum: 0
+
+doc:
+  Netlink raw family for tc qdisc, chain, class and filter configuration
+  over rtnetlink.
+
+definitions:
+  -
+    name: tcmsg
+    type: struct
+    members:
+      -
+        name: family
+        type: u8
+      -
+        name: pad
+        type: pad
+        len: 3
+      -
+        name: ifindex
+        type: s32
+      -
+        name: handle
+        type: u32
+      -
+        name: parent
+        type: u32
+      -
+        name: info
+        type: u32
+  -
+    name: tc-cls-flags
+    type: flags
+    entries:
+      - skip-hw
+      - skip-sw
+      - in-hw
+      - not-in-nw
+      - verbose
+  -
+    name: tc-stats
+    type: struct
+    members:
+      -
+        name: bytes
+        type: u64
+      -
+        name: packets
+        type: u32
+      -
+        name: drops
+        type: u32
+      -
+        name: overlimits
+        type: u32
+      -
+        name: bps
+        type: u32
+      -
+        name: pps
+        type: u32
+      -
+        name: qlen
+        type: u32
+      -
+        name: backlog
+        type: u32
+  -
+    name: tc-cbs-qopt
+    type: struct
+    members:
+      -
+        name: offload
+        type: u8
+      -
+        name: pad
+        type: pad
+        len: 3
+      -
+        name: hicredit
+        type: s32
+      -
+        name: locredit
+        type: s32
+      -
+        name: idleslope
+        type: s32
+      -
+        name: sendslope
+        type: s32
+  -
+    name: tc-etf-qopt
+    type: struct
+    members:
+      -
+        name: delta
+        type: s32
+      -
+        name: clockid
+        type: s32
+      -
+        name: flags
+        type: s32
+  -
+    name: tc-fifo-qopt
+    type: struct
+    members:
+      -
+        name: limit
+        type: u32
+  -
+    name: tc-htb-opt
+    type: struct
+    members:
+      -
+        name: rate
+        type: binary
+        len: 12
+      -
+        name: ceil
+        type: binary
+        len: 12
+      -
+        name: buffer
+        type: u32
+      -
+        name: cbuffer
+        type: u32
+      -
+        name: quantum
+        type: u32
+      -
+        name: level
+        type: u32
+      -
+        name: prio
+        type: u32
+  -
+    name: tc-htb-glob
+    type: struct
+    members:
+      -
+        name: version
+        type: u32
+      -
+        name: rate2quantum
+        type: u32
+      -
+        name: defcls
+        type: u32
+      -
+        name: debug
+        type: u32
+      -
+        name: direct-pkts
+        type: u32
+  -
+    name: tc-gred-qopt
+    type: struct
+    members:
+      -
+        name: limit
+        type: u32
+      -
+        name: qth-min
+        type: u32
+      -
+        name: qth-max
+        type: u32
+      -
+        name: DP
+        type: u32
+      -
+        name: backlog
+        type: u32
+      -
+        name: qave
+        type: u32
+      -
+        name: forced
+        type: u32
+      -
+        name: early
+        type: u32
+      -
+        name: other
+        type: u32
+      -
+        name: pdrop
+        type: u32
+      -
+        name: Wlog
+        type: u8
+      -
+        name: Plog
+        type: u8
+      -
+        name: Scell_log
+        type: u8
+      -
+        name: prio
+        type: u8
+      -
+        name: packets
+        type: u32
+      -
+        name: bytesin
+        type: u32
+  -
+    name: tc-gred-sopt
+    type: struct
+    members:
+      -
+        name: DPs
+        type: u32
+      -
+        name: def_DP
+        type: u32
+      -
+        name: grio
+        type: u8
+      -
+        name: flags
+        type: u8
+      -
+        name: pad
+        type: pad
+        len: 2
+  -
+    name: tc-hfsc-qopt
+    type: struct
+    members:
+      -
+        name: defcls
+        type: u16
+  -
+    name: tc-mqprio-qopt
+    type: struct
+    members:
+      -
+        name: num-tc
+        type: u8
+      -
+        name: prio-tc-map
+        type: binary
+        len: 16
+      -
+        name: hw
+        type: u8
+      -
+        name: count
+        type: binary
+        len: 32
+      -
+        name: offset
+        type: binary
+        len: 32
+  -
+    name: tc-multiq-qopt
+    type: struct
+    members:
+      -
+        name: bands
+        type: u16
+      -
+        name: max-bands
+        type: u16
+  -
+    name: tc-netem-qopt
+    type: struct
+    members:
+      -
+        name: latency
+        type: u32
+      -
+        name: limit
+        type: u32
+      -
+        name: loss
+        type: u32
+      -
+        name: gap
+        type: u32
+      -
+        name: duplicate
+        type: u32
+      -
+        name: jitter
+        type: u32
+  -
+    name: tc-plug-qopt
+    type: struct
+    members:
+      -
+        name: action
+        type: s32
+      -
+        name: limit
+        type: u32
+  -
+    name: tc-prio-qopt
+    type: struct
+    members:
+      -
+        name: bands
+        type: u16
+      -
+        name: priomap
+        type: binary
+        len: 16
+  -
+    name: tc-red-qopt
+    type: struct
+    members:
+      -
+        name: limit
+        type: u32
+      -
+        name: qth-min
+        type: u32
+      -
+        name: qth-max
+        type: u32
+      -
+        name: Wlog
+        type: u8
+      -
+        name: Plog
+        type: u8
+      -
+        name: Scell-log
+        type: u8
+      -
+        name: flags
+        type: u8
+  -
+    name: tc-sfb-qopt
+    type: struct
+    members:
+      -
+        name: rehash-interval
+        type: u32
+      -
+        name: warmup-time
+        type: u32
+      -
+        name: max
+        type: u32
+      -
+        name: bin-size
+        type: u32
+      -
+        name: increment
+        type: u32
+      -
+        name: decrement
+        type: u32
+      -
+        name: limit
+        type: u32
+      -
+        name: penalty-rate
+        type: u32
+      -
+        name: penalty-burst
+        type: u32
+  -
+    name: tc-sfq-qopt-v1 # TODO nested structs
+    type: struct
+    members:
+      -
+        name: quantum
+        type: u32
+      -
+        name: perturb-period
+        type: s32
+      -
+        name: limit
+        type: u32
+      -
+        name: divisor
+        type: u32
+      -
+        name: flows
+        type: u32
+      -
+        name: depth
+        type: u32
+      -
+        name: headdrop
+        type: u32
+      -
+        name: limit
+        type: u32
+      -
+        name: qth-min
+        type: u32
+      -
+        name: qth-mac
+        type: u32
+      -
+        name: Wlog
+        type: u8
+      -
+        name: Plog
+        type: u8
+      -
+        name: Scell-log
+        type: u8
+      -
+        name: flags
+        type: u8
+      -
+        name: max-P
+        type: u32
+      -
+        name: prob-drop
+        type: u32
+      -
+        name: forced-drop
+        type: u32
+      -
+        name: prob-mark
+        type: u32
+      -
+        name: forced-mark
+        type: u32
+      -
+        name: prob-mark-head
+        type: u32
+      -
+        name: forced-mark-head
+        type: u32
+  -
+    name: tc-tbf-qopt
+    type: struct
+    members:
+      -
+        name: rate
+        type: binary # TODO nested struct tc_ratespec
+        len: 12
+      -
+        name: peakrate
+        type: binary # TODO nested struct tc_ratespec
+        len: 12
+      -
+        name: limit
+        type: u32
+      -
+        name: buffer
+        type: u32
+      -
+        name: mtu
+        type: u32
+  -
+    name: tc-sizespec
+    type: struct
+    members:
+      -
+        name: cell-log
+        type: u8
+      -
+        name: size-log
+        type: u8
+      -
+        name: cell-align
+        type: s16
+      -
+        name: overhead
+        type: s32
+      -
+        name: linklayer
+        type: u32
+      -
+        name: mpu
+        type: u32
+      -
+        name: mtu
+        type: u32
+      -
+        name: tsize
+        type: u32
+  -
+    name: gnet-estimator
+    type: struct
+    members:
+      -
+        name: interval
+        type: s8
+      -
+        name: ewma-log
+        type: u8
+attribute-sets:
+  -
+    name: tc-attrs
+    attributes:
+      -
+        name: kind
+        type: string
+      -
+        name: options
+        type: sub-message
+        sub-message: tc-options-msg
+        selector: kind
+      -
+        name: stats
+        type: binary
+        struct: tc-stats
+      -
+        name: xstats
+        type: binary
+      -
+        name: rate
+        type: binary
+        struct: gnet-estimator
+      -
+        name: fcnt
+        type: u32
+      -
+        name: stats2
+        type: nest
+        nested-attributes: tca-stats-attrs
+      -
+        name: stab
+        type: nest
+        nested-attributes: tca-stab-attrs
+      -
+        name: pad
+        type: pad
+      -
+        name: dump-invisible
+        type: flag
+      -
+        name: chain
+        type: u32
+      -
+        name: hw-offload
+        type: u8
+      -
+        name: ingress-block
+        type: u32
+      -
+        name: egress-block
+        type: u32
+      -
+        name: dump-flags
+        type: bitfield32
+      -
+        name: ext-warn-msg
+        type: string
+  -
+    name: tc-cake-attrs
+    attributes:
+      -
+        name: pad
+        type: pad
+      -
+        name: base-rate64
+        type: u64
+      -
+        name: diffserv-mode
+        type: u32
+      -
+        name: atm
+        type: u32
+      -
+        name: flow-mode
+        type: u32
+      -
+        name: overhead
+        type: u32
+      -
+        name: rtt
+        type: u32
+      -
+        name: target
+        type: u32
+      -
+        name: autorate
+        type: u32
+      -
+        name: memory
+        type: u32
+      -
+        name: nat
+        type: u32
+      -
+        name: raw
+        type: u32
+      -
+        name: wash
+        type: u32
+      -
+        name: mpu
+        type: u32
+      -
+        name: ingress
+        type: u32
+      -
+        name: ack-filter
+        type: u32
+      -
+        name: split-gso
+        type: u32
+      -
+        name: fwmark
+        type: u32
+  -
+    name: tc-cake-stats-attrs
+    attributes:
+      -
+        name: pad
+        type: pad
+      -
+        name: capacity-estimate64
+        type: u64
+      -
+        name: memory-limit
+        type: u32
+      -
+        name: memory-used
+        type: u32
+      -
+        name: avg-netoff
+        type: u32
+      -
+        name: min-netlen
+        type: u32
+      -
+        name: max-netlen
+        type: u32
+      -
+        name: min-adjlen
+        type: u32
+      -
+        name: max-adjlen
+        type: u32
+      -
+        name: tin-stats
+        type: binary
+      -
+        name: deficit
+        type: s32
+      -
+        name: cobalt-count
+        type: u32
+      -
+        name: dropping
+        type: u32
+      -
+        name: drop-next-us
+        type: s32
+      -
+        name: p-drop
+        type: u32
+      -
+        name: blue-timer-us
+        type: s32
+  -
+    name: tc-cbs-attrs
+    attributes:
+      -
+        name: parms
+        type: binary
+        struct: tc-cbs-qopt
+  -
+    name: tc-choke-attrs
+    attributes:
+      -
+        name: parms
+        type: binary
+        struct: tc-red-qopt
+      -
+        name: stab
+        type: binary
+      -
+        name: max-p
+        type: u32
+  -
+    name: tc-codel-attrs
+    attributes:
+      -
+        name: target
+        type: u32
+      -
+        name: limit
+        type: u32
+      -
+        name: interval
+        type: u32
+      -
+        name: ecn
+        type: u32
+      -
+        name: ce-threshold
+        type: u32
+  -
+    name: tc-drr-attrs
+    attributes:
+      -
+        name: quantum
+        type: u32
+  -
+    name: tc-flower-attrs
+    attributes:
+      -
+        name: classid
+        type: u32
+      -
+        name: indev
+        type: string
+      -
+        name: act
+        type: array-nest
+        nested-attributes: tc-act-attrs
+      -
+        name: key-eth-dst
+        type: binary
+        display-hint: mac
+      -
+        name: key-eth-dst-mask
+        type: binary
+        display-hint: mac
+      -
+        name: key-eth-src
+        type: binary
+        display-hint: mac
+      -
+        name: key-eth-src-mask
+        type: binary
+        display-hint: mac
+      -
+        name: key-eth-type
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-ip-proto
+        type: u8
+      -
+        name: key-ipv4-src
+        type: u32
+        byte-order: big-endian
+        display-hint: ipv4
+      -
+        name: key-ipv4-src-mask
+        type: u32
+        byte-order: big-endian
+        display-hint: ipv4
+      -
+        name: key-ipv4-dst
+        type: u32
+        byte-order: big-endian
+        display-hint: ipv4
+      -
+        name: key-ipv4-dst-mask
+        type: u32
+        byte-order: big-endian
+        display-hint: ipv4
+      -
+        name: key-ipv6-src
+        type: binary
+        display-hint: ipv6
+      -
+        name: key-ipv6-src-mask
+        type: binary
+        display-hint: ipv6
+      -
+        name: key-ipv6-dst
+        type: binary
+        display-hint: ipv6
+      -
+        name: key-ipv6-dst-mask
+        type: binary
+        display-hint: ipv6
+      -
+        name: key-tcp-src
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-tcp-dst
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-udp-src
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-udp-dst
+        type: u16
+        byte-order: big-endian
+      -
+        name: flags
+        type: u32
+        enum: tc-cls-flags
+        enum-as-flags: true
+      -
+        name: key-vlan-id
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-vlan-prio
+        type: u8
+      -
+        name: key-vlan-eth-type
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-enc-key-id
+        type: u32
+        byte-order: big-endian
+      -
+        name: key-enc-ipv4-src
+        type: u32
+        byte-order: big-endian
+        display-hint: ipv4
+      -
+        name: key-enc-ipv4-src-mask
+        type: u32
+        byte-order: big-endian
+        display-hint: ipv4
+      -
+        name: key-enc-ipv4-dst
+        type: u32
+        byte-order: big-endian
+        display-hint: ipv4
+      -
+        name: key-enc-ipv4-dst-mask
+        type: u32
+        byte-order: big-endian
+        display-hint: ipv4
+      -
+        name: key-enc-ipv6-src
+        type: binary
+        display-hint: ipv6
+      -
+        name: key-enc-ipv6-src-mask
+        type: binary
+        display-hint: ipv6
+      -
+        name: key-enc-ipv6-dst
+        type: binary
+        display-hint: ipv6
+      -
+        name: key-enc-ipv6-dst-mask
+        type: binary
+        display-hint: ipv6
+      -
+        name: key-tcp-src-mask
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-tcp-dst-mask
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-udp-src-mask
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-udp-dst-mask
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-sctp-src-mask
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-sctp-dst-mask
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-sctp-src
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-sctp-dst
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-enc-udp-src-port
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-enc-udp-src-port-mask
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-enc-udp-dst-port
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-enc-udp-dst-port-mask
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-flags
+        type: u32
+        byte-order: big-endian
+      -
+        name: key-flags-mask
+        type: u32
+        byte-order: big-endian
+      -
+        name: key-icmpv4-code
+        type: u8
+      -
+        name: key-icmpv4-code-mask
+        type: u8
+      -
+        name: key-icmpv4-type
+        type: u8
+      -
+        name: key-icmpv4-type-mask
+        type: u8
+      -
+        name: key-icmpv6-code
+        type: u8
+      -
+        name: key-icmpv6-code-mask
+        type: u8
+      -
+        name: key-icmpv6-type
+        type: u8
+      -
+        name: key-icmpv6-type-mask
+        type: u8
+      -
+        name: key-arp-sip
+        type: u32
+        byte-order: big-endian
+      -
+        name: key-arp-sip-mask
+        type: u32
+        byte-order: big-endian
+      -
+        name: key-arp-tip
+        type: u32
+        byte-order: big-endian
+      -
+        name: key-arp-tip-mask
+        type: u32
+        byte-order: big-endian
+      -
+        name: key-arp-op
+        type: u8
+      -
+        name: key-arp-op-mask
+        type: u8
+      -
+        name: key-arp-sha
+        type: binary
+      -
+        name: key-arp-sha-mask
+        type: binary
+      -
+        name: key-arp-tha
+        type: binary
+      -
+        name: key-arp-tha-mask
+        type: binary
+      -
+        name: key-mpls-ttl
+        type: u8
+      -
+        name: key-mpls-bos
+        type: u8
+      -
+        name: key-mpls-tc
+        type: u8
+      -
+        name: key-mpls-label
+        type: u32
+        byte-order: big-endian
+      -
+        name: key-tcp-flags
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-tcp-flags-mask
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-ip-tos
+        type: u8
+      -
+        name: key-ip-tos-mask
+        type: u8
+      -
+        name: key-ip-ttl
+        type: u8
+      -
+        name: key-ip-ttl-mask
+        type: u8
+      -
+        name: key-cvlan-id
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-cvlan-prio
+        type: u8
+      -
+        name: key-cvlan-eth-type
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-enc-ip-tos
+        type: u8
+      -
+        name: key-enc-ip-tos-mask
+        type: u8
+      -
+        name: key-enc-ip-ttl
+        type: u8
+      -
+        name: key-enc-ip-ttl-mask
+        type: u8
+      -
+        name: key-enc-opts
+        type: binary
+      -
+        name: key-enc-opts-mask
+        type: binary
+      -
+        name: in-hw-count
+        type: u32
+      -
+        name: key-port-src-min
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-port-src-max
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-port-dst-min
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-port-dst-max
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-ct-state
+        type: u16
+      -
+        name: key-ct-state-mask
+        type: u16
+      -
+        name: key-ct-zone
+        type: u16
+      -
+        name: key-ct-zone-mask
+        type: u16
+      -
+        name: key-ct-mark
+        type: u32
+      -
+        name: key-ct-mark-mask
+        type: u32
+      -
+        name: key-ct-labels
+        type: binary
+      -
+        name: key-ct-labels-mask
+        type: binary
+      -
+        name: key-mpls-opts
+        type: binary
+      -
+        name: key-hash
+        type: u32
+      -
+        name: key-hash-mask
+        type: u32
+      -
+        name: key-num-of-vlans
+        type: u8
+      -
+        name: key-pppoe-sid
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-ppp-proto
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-l2-tpv3-sid
+        type: u32
+        byte-order: big-endian
+  -
+    name: tc-gred-attrs
+    attributes:
+      -
+        name: parms
+        type: binary # array of struct: tc-gred-qopt
+      -
+        name: stab
+        type: binary
+        sub-type: u8
+      -
+        name: dps
+        type: binary
+        struct: tc-gred-sopt
+      -
+        name: max-p
+        type: binary
+        sub-type: u32
+      -
+        name: limit
+        type: u32
+      -
+        name: vq-list
+        type: nest
+        nested-attributes: tca-gred-vq-list-attrs
+  -
+    name: tca-gred-vq-list-attrs
+    attributes:
+      -
+        name: entry
+        type: nest
+        nested-attributes: tca-gred-vq-entry-attrs
+        multi-attr: true
+  -
+    name: tca-gred-vq-entry-attrs
+    attributes:
+      -
+        name: pad
+        type: pad
+      -
+        name: dp
+        type: u32
+      -
+        name: stat-bytes
+        type: u32
+      -
+        name: stat-packets
+        type: u32
+      -
+        name: stat-backlog
+        type: u32
+      -
+        name: stat-prob-drop
+        type: u32
+      -
+        name: stat-prob-mark
+        type: u32
+      -
+        name: stat-forced-drop
+        type: u32
+      -
+        name: stat-forced-mark
+        type: u32
+      -
+        name: stat-pdrop
+        type: u32
+      -
+        name: stat-other
+        type: u32
+      -
+        name: flags
+        type: u32
+  -
+    name: tc-hfsc-attrs
+    attributes:
+      -
+        name: rsc
+        type: binary
+      -
+        name: fsc
+        type: binary
+      -
+        name: usc
+        type: binary
+  -
+    name: tc-hhf-attrs
+    attributes:
+      -
+        name: backlog-limit
+        type: u32
+      -
+        name: quantum
+        type: u32
+      -
+        name: hh-flows-limit
+        type: u32
+      -
+        name: reset-timeout
+        type: u32
+      -
+        name: admit-bytes
+        type: u32
+      -
+        name: evict-timeout
+        type: u32
+      -
+        name: non-hh-weight
+        type: u32
+  -
+    name: tc-htb-attrs
+    attributes:
+      -
+        name: parms
+        type: binary
+        struct: tc-htb-opt
+      -
+        name: init
+        type: binary
+        struct: tc-htb-glob
+      -
+        name: ctab
+        type: binary
+      -
+        name: rtab
+        type: binary
+      -
+        name: direct-qlen
+        type: u32
+      -
+        name: rate64
+        type: u64
+      -
+        name: ceil64
+        type: u64
+      -
+        name: pad
+        type: pad
+      -
+        name: offload
+        type: flag
+  -
+    name: tc-act-attrs
+    attributes:
+      -
+        name: kind
+        type: string
+      -
+        name: options
+        type: sub-message
+        sub-message: tc-act-options-msg
+        selector: kind
+      -
+        name: index
+        type: u32
+      -
+        name: stats
+        type: binary
+      -
+        name: pad
+        type: pad
+      -
+        name: cookie
+        type: binary
+      -
+        name: flags
+        type: bitfield32
+      -
+        name: hw-stats
+        type: bitfield32
+      -
+        name: used-hw-stats
+        type: bitfield32
+      -
+        name: in-hw-count
+        type: u32
+  -
+    name: tc-etf-attrs
+    attributes:
+      -
+        name: parms
+        type: binary
+        struct: tc-etf-qopt
+  -
+    name: tc-ets-attrs
+    attributes:
+      -
+        name: nbands
+        type: u8
+      -
+        name: nstrict
+        type: u8
+      -
+        name: quanta
+        type: nest
+        nested-attributes: tc-ets-attrs
+      -
+        name: quanta-band
+        type: u32
+        multi-attr: true
+      -
+        name: priomap
+        type: nest
+        nested-attributes: tc-ets-attrs
+      -
+        name: priomap-band
+        type: u8
+        multi-attr: true
+  -
+    name: tc-fq-attrs
+    attributes:
+      -
+        name: plimit
+        type: u32
+      -
+        name: flow-plimit
+        type: u32
+      -
+        name: quantum
+        type: u32
+      -
+        name: initial-quantum
+        type: u32
+      -
+        name: rate-enable
+        type: u32
+      -
+        name: flow-default-rate
+        type: u32
+      -
+        name: flow-max-rate
+        type: u32
+      -
+        name: buckets-log
+        type: u32
+      -
+        name: flow-refill-delay
+        type: u32
+      -
+        name: orphan-mask
+        type: u32
+      -
+        name: low-rate-threshold
+        type: u32
+      -
+        name: ce-threshold
+        type: u32
+      -
+        name: timer-slack
+        type: u32
+      -
+        name: horizon
+        type: u32
+      -
+        name: horizon-drop
+        type: u8
+  -
+    name: tc-fq-codel-attrs
+    attributes:
+      -
+        name: target
+        type: u32
+      -
+        name: limit
+        type: u32
+      -
+        name: interval
+        type: u32
+      -
+        name: ecn
+        type: u32
+      -
+        name: flows
+        type: u32
+      -
+        name: quantum
+        type: u32
+      -
+        name: ce-threshold
+        type: u32
+      -
+        name: drop-batch-size
+        type: u32
+      -
+        name: memory-limit
+        type: u32
+      -
+        name: ce-threshold-selector
+        type: u8
+      -
+        name: ce-threshold-mask
+        type: u8
+  -
+    name: tc-fq-pie-attrs
+    attributes:
+      -
+        name: limit
+        type: u32
+      -
+        name: flows
+        type: u32
+      -
+        name: target
+        type: u32
+      -
+        name: tupdate
+        type: u32
+      -
+        name: alpha
+        type: u32
+      -
+        name: beta
+        type: u32
+      -
+        name: quantum
+        type: u32
+      -
+        name: memory-limit
+        type: u32
+      -
+        name: ecn-prob
+        type: u32
+      -
+        name: ecn
+        type: u32
+      -
+        name: bytemode
+        type: u32
+      -
+        name: dq-rate-estimator
+        type: u32
+  -
+    name: tc-netem-attrs
+    attributes:
+      -
+        name: corr
+        type: binary
+      -
+        name: delay-dist
+        type: binary
+        sub-type: s16
+      -
+        name: reorder
+        type: binary
+      -
+        name: corrupt
+        type: binary
+      -
+        name: loss
+        type: binary
+      -
+        name: rate
+        type: binary
+      -
+        name: ecn
+        type: u32
+      -
+        name: rate64
+        type: u64
+      -
+        name: pad
+        type: u32
+      -
+        name: latency64
+        type: s64
+      -
+        name: jitter64
+        type: s64
+      -
+        name: slot
+        type: binary
+      -
+        name: slot-dist
+        type: binary
+        sub-type: s16
+  -
+    name: tc-pie-attrs
+    attributes:
+      -
+        name: target
+        type: u32
+      -
+        name: limit
+        type: u32
+      -
+        name: tupdate
+        type: u32
+      -
+        name: alpha
+        type: u32
+      -
+        name: beta
+        type: u32
+      -
+        name: ecn
+        type: u32
+      -
+        name: bytemode
+        type: u32
+      -
+        name: dq-rate-estimator
+        type: u32
+  -
+    name: tc-qfq-attrs
+    attributes:
+      -
+        name: weight
+        type: u32
+      -
+        name: lmax
+        type: u32
+  -
+    name: tc-red-attrs
+    attributes:
+      -
+        name: parms
+        type: binary
+        struct: tc-red-qopt
+      -
+        name: stab
+        type: binary
+      -
+        name: max-p
+        type: u32
+      -
+        name: flags
+        type: binary
+      -
+        name: early-drop-block
+        type: u32
+      -
+        name: mark-block
+        type: u32
+  -
+    name: tc-taprio-attrs
+    attributes:
+      -
+        name: priomap
+        type: binary
+        struct: tc-mqprio-qopt
+      -
+        name: sched-entry-list
+        type: nest
+        nested-attributes: tc-taprio-sched-entry-list
+      -
+        name: sched-base-time
+        type: s64
+      -
+        name: sched-single-entry
+        type: nest
+        nested-attributes: tc-taprio-sched-entry
+      -
+        name: sched-clockid
+        type: s32
+      -
+        name: pad
+        type: pad
+      -
+        name: admin-sched
+        type: binary
+      -
+        name: sched-cycle-time
+        type: s64
+      -
+        name: sched-cycle-time-extension
+        type: s64
+      -
+        name: flags
+        type: u32
+      -
+        name: txtime-delay
+        type: u32
+      -
+        name: tc-entry
+        type: nest
+        nested-attributes: tc-taprio-tc-entry-attrs
+  -
+    name: tc-taprio-sched-entry-list
+    attributes:
+      -
+        name: entry
+        type: nest
+        nested-attributes: tc-taprio-sched-entry
+  -
+    name: tc-taprio-sched-entry
+    attributes:
+      -
+        name: index
+        type: u32
+      -
+        name: cmd
+        type: u8
+      -
+        name: gate-mask
+        type: u32
+      -
+        name: interval
+        type: u32
+  -
+    name: tc-taprio-tc-entry-attrs
+    attributes:
+      -
+        name: index
+        type: u32
+      -
+        name: max-sdu
+        type: u32
+      -
+        name: fp
+        type: u32
+  -
+    name: tc-tbf-attrs
+    attributes:
+      -
+        name: parms
+        type: binary
+        struct: tc-tbf-qopt
+      -
+        name: rtab
+        type: binary
+      -
+        name: ptab
+        type: binary
+      -
+        name: rate64
+        type: u64
+      -
+        name: prate4
+        type: u64
+      -
+        name: burst
+        type: u32
+      -
+        name: pburst
+        type: u32
+      -
+        name: pad
+        type: pad
+  -
+    name: tca-gact-attrs
+    attributes:
+      -
+        name: tm
+        type: binary
+      -
+        name: parms
+        type: binary
+      -
+        name: prob
+        type: binary
+      -
+        name: pad
+        type: pad
+  -
+    name: tca-stab-attrs
+    attributes:
+      -
+        name: base
+        type: binary
+        struct: tc-sizespec
+      -
+        name: data
+        type: binary
+  -
+    name: tca-stats-attrs
+    attributes:
+      -
+        name: basic
+        type: binary
+      -
+        name: rate-est
+        type: binary
+      -
+        name: queue
+        type: binary
+      -
+        name: app
+        type: binary # TODO sub-message needs 2+ level deep lookup
+        sub-message: tca-stats-app-msg
+        selector: kind
+      -
+        name: rate-est64
+        type: binary
+      -
+        name: pad
+        type: pad
+      -
+        name: basic-hw
+        type: binary
+      -
+        name: pkt64
+        type: binary
+
+sub-messages:
+  -
+    name: tc-options-msg
+    formats:
+      -
+        value: bfifo
+        fixed-header: tc-fifo-qopt
+      -
+        value: cake
+        attribute-set: tc-cake-attrs
+      -
+        value: cbs
+        attribute-set: tc-cbs-attrs
+      -
+        value: choke
+        attribute-set: tc-choke-attrs
+      -
+        value: clsact # no content
+      -
+        value: codel
+        attribute-set: tc-codel-attrs
+      -
+        value: drr
+        attribute-set: tc-drr-attrs
+      -
+        value: etf
+        attribute-set: tc-etf-attrs
+      -
+        value: ets
+        attribute-set: tc-ets-attrs
+      -
+        value: fq
+        attribute-set: tc-fq-attrs
+      -
+        value: fq_codel
+        attribute-set: tc-fq-codel-attrs
+      -
+        value: fq_pie
+        attribute-set: tc-fq-pie-attrs
+      -
+        value: flower
+        attribute-set: tc-flower-attrs
+      -
+        value: gred
+        attribute-set: tc-gred-attrs
+      -
+        value: hfsc
+        fixed-header: tc-hfsc-qopt
+      -
+        value: hhf
+        attribute-set: tc-hhf-attrs
+      -
+        value: htb
+        attribute-set: tc-htb-attrs
+      -
+        value: ingress # no content
+      -
+        value: mq # no content
+      -
+        value: mqprio
+        fixed-header: tc-mqprio-qopt
+      -
+        value: multiq
+        fixed-header: tc-multiq-qopt
+      -
+        value: netem
+        fixed-header: tc-netem-qopt
+        attribute-set: tc-netem-attrs
+      -
+        value: pfifo
+        fixed-header: tc-fifo-qopt
+      -
+        value: pfifo_fast
+        fixed-header: tc-prio-qopt
+      -
+        value: pfifo_head_drop
+        fixed-header: tc-fifo-qopt
+      -
+        value: pie
+        attribute-set: tc-pie-attrs
+      -
+        value: plug
+        fixed-header: tc-plug-qopt
+      -
+        value: prio
+        fixed-header: tc-prio-qopt
+      -
+        value: qfq
+        attribute-set: tc-qfq-attrs
+      -
+        value: red
+        attribute-set: tc-red-attrs
+      -
+        value: sfb
+        fixed-header: tc-sfb-qopt
+      -
+        value: sfq
+        fixed-header: tc-sfq-qopt-v1
+      -
+        value: taprio
+        attribute-set: tc-taprio-attrs
+      -
+        value: tbf
+        attribute-set: tc-tbf-attrs
+  -
+    name: tc-act-options-msg
+    formats:
+      -
+        value: gact
+        attribute-set: tca-gact-attrs
+  -
+    name: tca-stats-app-msg
+    formats:
+      -
+        value: bfifo
+      -
+        value: blackhole
+      -
+        value: cake
+        attribute-set: tc-cake-stats-attrs
+      -
+        value: cbs
+      -
+        value: choke
+      -
+        value: clsact
+      -
+        value: codel
+      -
+        value: drr
+      -
+        value: etf
+      -
+        value: ets
+      -
+        value: fq
+      -
+        value: fq_codel
+      -
+        value: fq_pie
+      -
+        value: flower
+      -
+        value: gred
+      -
+        value: hfsc
+      -
+        value: hhf
+      -
+        value: htb
+      -
+        value: ingress
+      -
+        value: mq
+      -
+        value: mqprio
+      -
+        value: multiq
+      -
+        value: netem
+      -
+        value: noqueue
+      -
+        value: pfifo
+      -
+        value: pfifo_fast
+      -
+        value: pfifo_head_drop
+      -
+        value: pie
+      -
+        value: plug
+      -
+        value: prio
+      -
+        value: qfq
+      -
+        value: red
+      -
+        value: sfb
+      -
+        value: sfq
+      -
+        value: taprio
+      -
+        value: tbf
+
+operations:
+  enum-model: directional
+  list:
+    -
+      name: newqdisc
+      doc: Create new tc qdisc.
+      attribute-set: tc-attrs
+      fixed-header: tcmsg
+      do:
+        request:
+          value: 36
+          attributes: &create-params
+            - kind
+            - options
+            - rate
+            - chain
+            - ingress-block
+            - egress-block
+    -
+      name: delqdisc
+      doc: Delete existing tc qdisc.
+      attribute-set: tc-attrs
+      fixed-header: tcmsg
+      do:
+        request:
+          value: 37
+    -
+      name: getqdisc
+      doc: Get / dump tc qdisc information.
+      attribute-set: tc-attrs
+      fixed-header: tcmsg
+      do:
+        request:
+          value: 38
+          attributes:
+            - dump-invisible
+        reply:
+          value: 36
+          attributes: &tc-all
+            - kind
+            - options
+            - stats
+            - xstats
+            - rate
+            - fcnt
+            - stats2
+            - stab
+            - chain
+            - ingress-block
+            - egress-block
+    -
+      name: newtclass
+      doc: Get / dump tc traffic class information.
+      attribute-set: tc-attrs
+      fixed-header: tcmsg
+      do:
+        request:
+          value: 40
+          attributes: *create-params
+    -
+      name: deltclass
+      doc: Get / dump tc traffic class information.
+      attribute-set: tc-attrs
+      fixed-header: tcmsg
+      do:
+        request:
+          value: 41
+    -
+      name: gettclass
+      doc: Get / dump tc traffic class information.
+      attribute-set: tc-attrs
+      fixed-header: tcmsg
+      do:
+        request:
+          value: 42
+        reply:
+          value: 40
+          attributes: *tc-all
+    -
+      name: newtfilter
+      doc: Get / dump tc filter information.
+      attribute-set: tc-attrs
+      fixed-header: tcmsg
+      do:
+        request:
+          value: 44
+          attributes: *create-params
+    -
+      name: deltfilter
+      doc: Get / dump tc filter information.
+      attribute-set: tc-attrs
+      fixed-header: tcmsg
+      do:
+        request:
+          value: 45
+          attributes:
+            - chain
+            - kind
+    -
+      name: gettfilter
+      doc: Get / dump tc filter information.
+      attribute-set: tc-attrs
+      fixed-header: tcmsg
+      do:
+        request:
+          value: 46
+          attributes:
+            - chain
+            - kind
+        reply:
+          value: 44
+          attributes: *tc-all
+      dump:
+        request:
+          value: 46
+          attributes:
+            - chain
+            - dump-flags
+        reply:
+          value: 44
+          attributes: *tc-all
+    -
+      name: newchain
+      doc: Get / dump tc chain information.
+      attribute-set: tc-attrs
+      fixed-header: tcmsg
+      do:
+        request:
+          value: 100
+          attributes: *create-params
+    -
+      name: delchain
+      doc: Get / dump tc chain information.
+      attribute-set: tc-attrs
+      fixed-header: tcmsg
+      do:
+        request:
+          value: 101
+          attributes:
+            - chain
+    -
+      name: getchain
+      doc: Get / dump tc chain information.
+      attribute-set: tc-attrs
+      fixed-header: tcmsg
+      do:
+        request:
+          value: 102
+          attributes:
+            - chain
+        reply:
+          value: 100
+          attributes: *tc-all
+
+mcast-groups:
+  list:
+    -
+      name: rtnlgrp-tc
+      value: 4
diff --git linux-libre-6.7-gnu/Documentation/networking/bridge.rst linux-libre-6.8-gnu/Documentation/networking/bridge.rst
index c859f3c1636e..ba14e7b07869 100644
--- linux-libre-6.7-gnu/Documentation/networking/bridge.rst
+++ linux-libre-6.8-gnu/Documentation/networking/bridge.rst
@@ -4,18 +4,332 @@
 Ethernet Bridging
 =================
 
-In order to use the Ethernet bridging functionality, you'll need the
-userspace tools.
+Introduction
+============
 
-Documentation for Linux bridging is on:
-   https://wiki.linuxfoundation.org/networking/bridge
+The IEEE 802.1Q-2022 (Bridges and Bridged Networks) standard defines the
+operation of bridges in computer networks. A bridge, in the context of this
+standard, is a device that connects two or more network segments and operates
+at the data link layer (Layer 2) of the OSI (Open Systems Interconnection)
+model. The purpose of a bridge is to filter and forward frames between
+different segments based on the destination MAC (Media Access Control) address.
 
-The bridge-utilities are maintained at:
-   git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/bridge-utils.git
+Bridge kAPI
+===========
 
-Additionally, the iproute2 utilities can be used to configure
-bridge devices.
+Here are some core structures of bridge code. Note that the kAPI is *unstable*,
+and can be changed at any time.
 
-If you still have questions, don't hesitate to post to the mailing list 
-(more info https://lists.linux-foundation.org/mailman/listinfo/bridge).
+.. kernel-doc:: net/bridge/br_private.h
+   :identifiers: net_bridge_vlan
 
+Bridge uAPI
+===========
+
+Modern Linux bridge uAPI is accessed via Netlink interface. You can find
+below files where the bridge and bridge port netlink attributes are defined.
+
+Bridge netlink attributes
+-------------------------
+
+.. kernel-doc:: include/uapi/linux/if_link.h
+   :doc: Bridge enum definition
+
+Bridge port netlink attributes
+------------------------------
+
+.. kernel-doc:: include/uapi/linux/if_link.h
+   :doc: Bridge port enum definition
+
+Bridge sysfs
+------------
+
+The sysfs interface is deprecated and should not be extended if new
+options are added.
+
+STP
+===
+
+The STP (Spanning Tree Protocol) implementation in the Linux bridge driver
+is a critical feature that helps prevent loops and broadcast storms in
+Ethernet networks by identifying and disabling redundant links. In a Linux
+bridge context, STP is crucial for network stability and availability.
+
+STP is a Layer 2 protocol that operates at the Data Link Layer of the OSI
+model. It was originally developed as IEEE 802.1D and has since evolved into
+multiple versions, including Rapid Spanning Tree Protocol (RSTP) and
+`Multiple Spanning Tree Protocol (MSTP)
+<https://lore.kernel.org/netdev/20220316150857.2442916-1-tobias@waldekranz.com/>`_.
+
+The 802.1D-2004 removed the original Spanning Tree Protocol, instead
+incorporating the Rapid Spanning Tree Protocol (RSTP). By 2014, all the
+functionality defined by IEEE 802.1D has been incorporated into either
+IEEE 802.1Q (Bridges and Bridged Networks) or IEEE 802.1AC (MAC Service
+Definition). 802.1D has been officially withdrawn in 2022.
+
+Bridge Ports and STP States
+---------------------------
+
+In the context of STP, bridge ports can be in one of the following states:
+  * Blocking: The port is disabled for data traffic and only listens for
+    BPDUs (Bridge Protocol Data Units) from other devices to determine the
+    network topology.
+  * Listening: The port begins to participate in the STP process and listens
+    for BPDUs.
+  * Learning: The port continues to listen for BPDUs and begins to learn MAC
+    addresses from incoming frames but does not forward data frames.
+  * Forwarding: The port is fully operational and forwards both BPDUs and
+    data frames.
+  * Disabled: The port is administratively disabled and does not participate
+    in the STP process. The data frames forwarding are also disabled.
+
+Root Bridge and Convergence
+---------------------------
+
+In the context of networking and Ethernet bridging in Linux, the root bridge
+is a designated switch in a bridged network that serves as a reference point
+for the spanning tree algorithm to create a loop-free topology.
+
+Here's how the STP works and root bridge is chosen:
+  1. Bridge Priority: Each bridge running a spanning tree protocol, has a
+     configurable Bridge Priority value. The lower the value, the higher the
+     priority. By default, the Bridge Priority is set to a standard value
+     (e.g., 32768).
+  2. Bridge ID: The Bridge ID is composed of two components: Bridge Priority
+     and the MAC address of the bridge. It uniquely identifies each bridge
+     in the network. The Bridge ID is used to compare the priorities of
+     different bridges.
+  3. Bridge Election: When the network starts, all bridges initially assume
+     that they are the root bridge. They start advertising Bridge Protocol
+     Data Units (BPDU) to their neighbors, containing their Bridge ID and
+     other information.
+  4. BPDU Comparison: Bridges exchange BPDUs to determine the root bridge.
+     Each bridge examines the received BPDUs, including the Bridge Priority
+     and Bridge ID, to determine if it should adjust its own priorities.
+     The bridge with the lowest Bridge ID will become the root bridge.
+  5. Root Bridge Announcement: Once the root bridge is determined, it sends
+     BPDUs with information about the root bridge to all other bridges in the
+     network. This information is used by other bridges to calculate the
+     shortest path to the root bridge and, in doing so, create a loop-free
+     topology.
+  6. Forwarding Ports: After the root bridge is selected and the spanning tree
+     topology is established, each bridge determines which of its ports should
+     be in the forwarding state (used for data traffic) and which should be in
+     the blocking state (used to prevent loops). The root bridge's ports are
+     all in the forwarding state. while other bridges have some ports in the
+     blocking state to avoid loops.
+  7. Root Ports: After the root bridge is selected and the spanning tree
+     topology is established, each non-root bridge processes incoming
+     BPDUs and determines which of its ports provides the shortest path to the
+     root bridge based on the information in the received BPDUs. This port is
+     designated as the root port. And it is in the Forwarding state, allowing
+     it to actively forward network traffic.
+  8. Designated ports: A designated port is the port through which the non-root
+     bridge will forward traffic towards the designated segment. Designated ports
+     are placed in the Forwarding state. All other ports on the non-root
+     bridge that are not designated for specific segments are placed in the
+     Blocking state to prevent network loops.
+
+STP ensures network convergence by calculating the shortest path and disabling
+redundant links. When network topology changes occur (e.g., a link failure),
+STP recalculates the network topology to restore connectivity while avoiding loops.
+
+Proper configuration of STP parameters, such as the bridge priority, can
+influence network performance, path selection and which bridge becomes the
+Root Bridge.
+
+User space STP helper
+---------------------
+
+The user space STP helper *bridge-stp* is a program to control whether to use
+user mode spanning tree. The ``/sbin/bridge-stp <bridge> <start|stop>`` is
+called by the kernel when STP is enabled/disabled on a bridge
+(via ``brctl stp <bridge> <on|off>`` or ``ip link set <bridge> type bridge
+stp_state <0|1>``).  The kernel enables user_stp mode if that command returns
+0, or enables kernel_stp mode if that command returns any other value.
+
+VLAN
+====
+
+A LAN (Local Area Network) is a network that covers a small geographic area,
+typically within a single building or a campus. LANs are used to connect
+computers, servers, printers, and other networked devices within a localized
+area. LANs can be wired (using Ethernet cables) or wireless (using Wi-Fi).
+
+A VLAN (Virtual Local Area Network) is a logical segmentation of a physical
+network into multiple isolated broadcast domains. VLANs are used to divide
+a single physical LAN into multiple virtual LANs, allowing different groups of
+devices to communicate as if they were on separate physical networks.
+
+Typically there are two VLAN implementations, IEEE 802.1Q and IEEE 802.1ad
+(also known as QinQ). IEEE 802.1Q is a standard for VLAN tagging in Ethernet
+networks. It allows network administrators to create logical VLANs on a
+physical network and tag Ethernet frames with VLAN information, which is
+called *VLAN-tagged frames*. IEEE 802.1ad, commonly known as QinQ or Double
+VLAN, is an extension of the IEEE 802.1Q standard. QinQ allows for the
+stacking of multiple VLAN tags within a single Ethernet frame. The Linux
+bridge supports both the IEEE 802.1Q and `802.1AD
+<https://lore.kernel.org/netdev/1402401565-15423-1-git-send-email-makita.toshiaki@lab.ntt.co.jp/>`_
+protocol for VLAN tagging.
+
+`VLAN filtering <https://lore.kernel.org/netdev/1360792820-14116-1-git-send-email-vyasevic@redhat.com/>`_
+on a bridge is disabled by default. After enabling VLAN filtering on a bridge,
+it will start forwarding frames to appropriate destinations based on their
+destination MAC address and VLAN tag (both must match).
+
+Multicast
+=========
+
+The Linux bridge driver has multicast support allowing it to process Internet
+Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD)
+messages, and to efficiently forward multicast data packets. The bridge
+driver supports IGMPv2/IGMPv3 and MLDv1/MLDv2.
+
+Multicast snooping
+------------------
+
+Multicast snooping is a networking technology that allows network switches
+to intelligently manage multicast traffic within a local area network (LAN).
+
+The switch maintains a multicast group table, which records the association
+between multicast group addresses and the ports where hosts have joined these
+groups. The group table is dynamically updated based on the IGMP/MLD messages
+received. With the multicast group information gathered through snooping, the
+switch optimizes the forwarding of multicast traffic. Instead of blindly
+broadcasting the multicast traffic to all ports, it sends the multicast
+traffic based on the destination MAC address only to ports which have
+subscribed the respective destination multicast group.
+
+When created, the Linux bridge devices have multicast snooping enabled by
+default. It maintains a Multicast forwarding database (MDB) which keeps track
+of port and group relationships.
+
+IGMPv3/MLDv2 EHT support
+------------------------
+
+The Linux bridge supports IGMPv3/MLDv2 EHT (Explicit Host Tracking), which
+was added by `474ddb37fa3a ("net: bridge: multicast: add EHT allow/block handling")
+<https://lore.kernel.org/netdev/20210120145203.1109140-1-razor@blackwall.org/>`_
+
+The explicit host tracking enables the device to keep track of each
+individual host that is joined to a particular group or channel. The main
+benefit of the explicit host tracking in IGMP is to allow minimal leave
+latencies when a host leaves a multicast group or channel.
+
+The length of time between a host wanting to leave and a device stopping
+traffic forwarding is called the IGMP leave latency. A device configured
+with IGMPv3 or MLDv2 and explicit tracking can immediately stop forwarding
+traffic if the last host to request to receive traffic from the device
+indicates that it no longer wants to receive traffic. The leave latency
+is thus bound only by the packet transmission latencies in the multiaccess
+network and the processing time in the device.
+
+Other multicast features
+------------------------
+
+The Linux bridge also supports `per-VLAN multicast snooping
+<https://lore.kernel.org/netdev/20210719170637.435541-1-razor@blackwall.org/>`_,
+which is disabled by default but can be enabled. And `Multicast Router Discovery
+<https://lore.kernel.org/netdev/20190121062628.2710-1-linus.luessing@c0d3.blue/>`_,
+which help identify the location of multicast routers.
+
+Switchdev
+=========
+
+Linux Bridge Switchdev is a feature in the Linux kernel that extends the
+capabilities of the traditional Linux bridge to work more efficiently with
+hardware switches that support switchdev. With Linux Bridge Switchdev, certain
+networking functions like forwarding, filtering, and learning of Ethernet
+frames can be offloaded to a hardware switch. This offloading reduces the
+burden on the Linux kernel and CPU, leading to improved network performance
+and lower latency.
+
+To use Linux Bridge Switchdev, you need hardware switches that support the
+switchdev interface. This means that the switch hardware needs to have the
+necessary drivers and functionality to work in conjunction with the Linux
+kernel.
+
+Please see the :ref:`switchdev` document for more details.
+
+Netfilter
+=========
+
+The bridge netfilter module is a legacy feature that allows to filter bridged
+packets with iptables and ip6tables. Its use is discouraged. Users should
+consider using nftables for packet filtering.
+
+The older ebtables tool is more feature-limited compared to nftables, but
+just like nftables it doesn't need this module either to function.
+
+The br_netfilter module intercepts packets entering the bridge, performs
+minimal sanity tests on ipv4 and ipv6 packets and then pretends that
+these packets are being routed, not bridged. br_netfilter then calls
+the ip and ipv6 netfilter hooks from the bridge layer, i.e. ip(6)tables
+rulesets will also see these packets.
+
+br_netfilter is also the reason for the iptables *physdev* match:
+This match is the only way to reliably tell routed and bridged packets
+apart in an iptables ruleset.
+
+Note that ebtables and nftables will work fine without the br_netfilter module.
+iptables/ip6tables/arptables do not work for bridged traffic because they
+plug in the routing stack. nftables rules in ip/ip6/inet/arp families won't
+see traffic that is forwarded by a bridge either, but that's very much how it
+should be.
+
+Historically the feature set of ebtables was very limited (it still is),
+this module was added to pretend packets are routed and invoke the ipv4/ipv6
+netfilter hooks from the bridge so users had access to the more feature-rich
+iptables matching capabilities (including conntrack). nftables doesn't have
+this limitation, pretty much all features work regardless of the protocol family.
+
+So, br_netfilter is only needed if users, for some reason, need to use
+ip(6)tables to filter packets forwarded by the bridge, or NAT bridged
+traffic. For pure link layer filtering, this module isn't needed.
+
+Other Features
+==============
+
+The Linux bridge also supports `IEEE 802.11 Proxy ARP
+<https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=958501163ddd6ea22a98f94fa0e7ce6d4734e5c4>`_,
+`Media Redundancy Protocol (MRP)
+<https://lore.kernel.org/netdev/20200426132208.3232-1-horatiu.vultur@microchip.com/>`_,
+`Media Redundancy Protocol (MRP) LC mode
+<https://lore.kernel.org/r/20201124082525.273820-1-horatiu.vultur@microchip.com>`_,
+`IEEE 802.1X port authentication
+<https://lore.kernel.org/netdev/20220218155148.2329797-1-schultz.hans+netdev@gmail.com/>`_,
+and `MAC Authentication Bypass (MAB)
+<https://lore.kernel.org/netdev/20221101193922.2125323-2-idosch@nvidia.com/>`_.
+
+FAQ
+===
+
+What does a bridge do?
+----------------------
+
+A bridge transparently forwards traffic between multiple network interfaces.
+In plain English this means that a bridge connects two or more physical
+Ethernet networks, to form one larger (logical) Ethernet network.
+
+Is it L3 protocol independent?
+------------------------------
+
+Yes. The bridge sees all frames, but it *uses* only L2 headers/information.
+As such, the bridging functionality is protocol independent, and there should
+be no trouble forwarding IPX, NetBEUI, IP, IPv6, etc.
+
+Contact Info
+============
+
+The code is currently maintained by Roopa Prabhu <roopa@nvidia.com> and
+Nikolay Aleksandrov <razor@blackwall.org>. Bridge bugs and enhancements
+are discussed on the linux-netdev mailing list netdev@vger.kernel.org and
+bridge@lists.linux-foundation.org.
+
+The list is open to anyone interested: http://vger.kernel.org/vger-lists.html#netdev
+
+External Links
+==============
+
+The old Documentation for Linux bridging is on:
+https://wiki.linuxfoundation.org/networking/bridge
diff --git linux-libre-6.7-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
index 5eaa3ab6c73e..b842bcb14255 100644
--- linux-libre-6.7-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
+++ linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
@@ -54,6 +54,7 @@ ena_common_defs.h   Common definitions for ena_com layer.
 ena_regs_defs.h     Definition of ENA PCI memory-mapped (MMIO) registers.
 ena_netdev.[ch]     Main Linux kernel driver.
 ena_ethtool.c       ethtool callbacks.
+ena_xdp.[ch]        XDP files
 ena_pci_id_tbl.h    Supported device IDs.
 =================   ======================================================
 
diff --git linux-libre-6.7-gnu/Documentation/networking/device_drivers/ethernet/intel/ice.rst linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/intel/ice.rst
index 10df2071892a..9ba2ed79c78f 100644
--- linux-libre-6.7-gnu/Documentation/networking/device_drivers/ethernet/intel/ice.rst
+++ linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/intel/ice.rst
@@ -824,6 +824,147 @@ driver writes raw bytes by the GNSS object to the receiver through i2c. Please
 refer to the hardware GNSS module documentation for configuration details.
 
 
+Firmware (FW) logging
+---------------------
+The driver supports FW logging via the debugfs interface on PF 0 only. The FW
+running on the NIC must support FW logging; if the FW doesn't support FW logging
+the 'fwlog' file will not get created in the ice debugfs directory.
+
+Module configuration
+~~~~~~~~~~~~~~~~~~~~
+Firmware logging is configured on a per module basis. Each module can be set to
+a value independent of the other modules (unless the module 'all' is specified).
+The modules will be instantiated under the 'fwlog/modules' directory.
+
+The user can set the log level for a module by writing to the module file like
+this::
+
+  # echo <log_level> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/<module>
+
+where
+
+* log_level is a name as described below. Each level includes the
+  messages from the previous/lower level
+
+      *	none
+      *	error
+      *	warning
+      *	normal
+      *	verbose
+
+* module is a name that represents the module to receive events for. The
+  module names are
+
+      *	general
+      *	ctrl
+      *	link
+      *	link_topo
+      *	dnl
+      *	i2c
+      *	sdp
+      *	mdio
+      *	adminq
+      *	hdma
+      *	lldp
+      *	dcbx
+      *	dcb
+      *	xlr
+      *	nvm
+      *	auth
+      *	vpd
+      *	iosf
+      *	parser
+      *	sw
+      *	scheduler
+      *	txq
+      *	rsvd
+      *	post
+      *	watchdog
+      *	task_dispatch
+      *	mng
+      *	synce
+      *	health
+      *	tsdrv
+      *	pfreg
+      *	mdlver
+      *	all
+
+The name 'all' is special and allows the user to set all of the modules to the
+specified log_level or to read the log_level of all of the modules.
+
+Example usage to configure the modules
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To set a single module to 'verbose'::
+
+  # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/link
+
+To set multiple modules then issue the command multiple times::
+
+  # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/link
+  # echo warning > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/ctrl
+  # echo none > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb
+
+To set all the modules to the same value::
+
+  # echo normal > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all
+
+To read the log_level of a specific module (e.g. module 'general')::
+
+  # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/general
+
+To read the log_level of all the modules::
+
+  # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all
+
+Enabling FW log
+~~~~~~~~~~~~~~~
+Configuring the modules indicates to the FW that the configured modules should
+generate events that the driver is interested in, but it **does not** send the
+events to the driver until the enable message is sent to the FW. To do this
+the user can write a 1 (enable) or 0 (disable) to 'fwlog/enable'. An example
+is::
+
+  # echo 1 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/enable
+
+Retrieving FW log data
+~~~~~~~~~~~~~~~~~~~~~~
+The FW log data can be retrieved by reading from 'fwlog/data'. The user can
+write any value to 'fwlog/data' to clear the data. The data can only be cleared
+when FW logging is disabled. The FW log data is a binary file that is sent to
+Intel and used to help debug user issues.
+
+An example to read the data is::
+
+  # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data > fwlog.bin
+
+An example to clear the data is::
+
+  # echo 0 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data
+
+Changing how often the log events are sent to the driver
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver receives FW log data from the Admin Receive Queue (ARQ). The
+frequency that the FW sends the ARQ events can be configured by writing to
+'fwlog/nr_messages'. The range is 1-128 (1 means push every log message, 128
+means push only when the max AQ command buffer is full). The suggested value is
+10. The user can see what the value is configured to by reading
+'fwlog/nr_messages'. An example to set the value is::
+
+  # echo 50 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages
+
+Configuring the amount of memory used to store FW log data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver stores FW log data within the driver. The default size of the memory
+used to store the data is 1MB. Some use cases may require more or less data so
+the user can change the amount of memory that is allocated for FW log data.
+To change the amount of memory then write to 'fwlog/log_size'. The value must be
+one of: 128K, 256K, 512K, 1M, or 2M. FW logging must be disabled to change the
+value. An example of changing the value is::
+
+  # echo 128K > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size
+
+
 Performance Optimization
 ========================
 Driver defaults are meant to fit a wide variety of workloads, but if further
diff --git linux-libre-6.7-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst
index cad96c8d1f97..c96d262b30be 100644
--- linux-libre-6.7-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst
+++ linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst
@@ -22,8 +22,13 @@ EndPoint NIC.
 Supported Devices
 =================
 Currently, this driver support following devices:
+ * Network controller: Cavium, Inc. Device b100
  * Network controller: Cavium, Inc. Device b200
  * Network controller: Cavium, Inc. Device b400
+ * Network controller: Cavium, Inc. Device b900
+ * Network controller: Cavium, Inc. Device ba00
+ * Network controller: Cavium, Inc. Device bc00
+ * Network controller: Cavium, Inc. Device bd00
 
 Interface Control
 =================
diff --git linux-libre-6.7-gnu/Documentation/networking/device_drivers/wifi/index.rst linux-libre-6.8-gnu/Documentation/networking/device_drivers/wifi/index.rst
index bf91a87c7acf..fb394f5de4a9 100644
--- linux-libre-6.7-gnu/Documentation/networking/device_drivers/wifi/index.rst
+++ linux-libre-6.8-gnu/Documentation/networking/device_drivers/wifi/index.rst
@@ -10,7 +10,6 @@ Contents:
 
    intel/ipw2100
    intel/ipw2200
-   ray_cs
 
 .. only::  subproject and html
 
diff --git linux-libre-6.7-gnu/Documentation/networking/device_drivers/wifi/ray_cs.rst linux-libre-6.8-gnu/Documentation/networking/device_drivers/wifi/ray_cs.rst
deleted file mode 100644
index 9a46d1ae8f20..000000000000
--- linux-libre-6.7-gnu/Documentation/networking/device_drivers/wifi/ray_cs.rst
+++ /dev/null
@@ -1,165 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-=========================
-Raylink wireless LAN card
-=========================
-
-September 21, 1999
-
-Copyright |copy| 1998  Corey Thomas (corey@world.std.com)
-
-This file is the documentation for the Raylink Wireless LAN card driver for
-Linux.  The Raylink wireless LAN card is a PCMCIA card which provides IEEE
-802.11 compatible wireless network connectivity at 1 and 2 megabits/second.
-See http://www.raytheon.com/micro/raylink/ for more information on the Raylink
-card.  This driver is in early development and does have bugs.  See the known
-bugs and limitations at the end of this document for more information.
-This driver also works with WebGear's Aviator 2.4 and Aviator Pro
-wireless LAN cards.
-
-As of kernel 2.3.18, the ray_cs driver is part of the Linux kernel
-source.  My web page for the development of ray_cs is at
-http://web.ralinktech.com/ralink/Home/Support/Linux.html
-and I can be emailed at corey@world.std.com
-
-The kernel driver is based on ray_cs-1.62.tgz
-
-The driver at my web page is intended to be used as an add on to
-David Hinds pcmcia package.  All the command line parameters are
-available when compiled as a module.  When built into the kernel, only
-the essid= string parameter is available via the kernel command line.
-This will change after the method of sorting out parameters for all
-the PCMCIA drivers is agreed upon.  If you must have a built in driver
-with nondefault parameters, they can be edited in
-/usr/src/linux/drivers/net/pcmcia/ray_cs.c.  Searching for module_param
-will find them all.
-
-Information on card services is available at:
-
-	http://pcmcia-cs.sourceforge.net/
-
-
-Card services user programs are still required for PCMCIA devices.
-pcmcia-cs-3.1.1 or greater is required for the kernel version of
-the driver.
-
-Currently, ray_cs is not part of David Hinds card services package,
-so the following magic is required.
-
-At the end of the /etc/pcmcia/config.opts file, add the line:
-source ./ray_cs.opts
-This will make card services read the ray_cs.opts file
-when starting.  Create the file /etc/pcmcia/ray_cs.opts containing the
-following::
-
-  #### start of /etc/pcmcia/ray_cs.opts ###################
-  # Configuration options for Raylink Wireless LAN PCMCIA card
-  device "ray_cs"
-    class "network" module "misc/ray_cs"
-
-  card "RayLink PC Card WLAN Adapter"
-    manfid 0x01a6, 0x0000
-    bind "ray_cs"
-
-  module "misc/ray_cs" opts ""
-  #### end of /etc/pcmcia/ray_cs.opts #####################
-
-
-To join an existing network with
-different parameters, contact the network administrator for the
-configuration information, and edit /etc/pcmcia/ray_cs.opts.
-Add the parameters below between the empty quotes.
-
-Parameters for ray_cs driver which may be specified in ray_cs.opts:
-
-=============== =============== =============================================
-bc              integer         0 = normal mode (802.11 timing),
-				1 = slow down inter frame timing to allow
-				operation with older breezecom access
-				points.
-
-beacon_period	integer         beacon period in Kilo-microseconds,
-
-				legal values = must be integer multiple
-				of hop dwell
-
-				default = 256
-
-country         integer         1 = USA (default),
-				2 = Europe,
-				3 = Japan,
-				4 = Korea,
-				5 = Spain,
-				6 = France,
-				7 = Israel,
-				8 = Australia
-
-essid		string		ESS ID - network name to join
-
-				string with maximum length of 32 chars
-				default value = "ADHOC_ESSID"
-
-hop_dwell	integer         hop dwell time in Kilo-microseconds
-
-				legal values = 16,32,64,128(default),256
-
-irq_mask	integer         linux standard 16 bit value 1bit/IRQ
-
-				lsb is IRQ 0, bit 1 is IRQ 1 etc.
-				Used to restrict choice of IRQ's to use.
-				Recommended method for controlling
-				interrupts is in /etc/pcmcia/config.opts
-
-net_type	integer		0 (default) = adhoc network,
-				1 = infrastructure
-
-phy_addr	string          string containing new MAC address in
-				hex, must start with x eg
-				x00008f123456
-
-psm		integer         0 = continuously active,
-				1 = power save mode (not useful yet)
-
-pc_debug	integer		(0-5) larger values for more verbose
-				logging.  Replaces ray_debug.
-
-ray_debug	integer		Replaced with pc_debug
-
-ray_mem_speed   integer         defaults to 500
-
-sniffer         integer         0 = not sniffer (default),
-				1 = sniffer which can be used to record all
-				network traffic using tcpdump or similar,
-				but no normal network use is allowed.
-
-translate	integer		0 = no translation (encapsulate frames),
-				1 = translation    (RFC1042/802.1)
-=============== =============== =============================================
-
-More on sniffer mode:
-
-tcpdump does not understand 802.11 headers, so it can't
-interpret the contents, but it can record to a file.  This is only
-useful for debugging 802.11 lowlevel protocols that are not visible to
-linux.  If you want to watch ftp xfers, or do similar things, you
-don't need to use sniffer mode.  Also, some packet types are never
-sent up by the card, so you will never see them (ack, rts, cts, probe
-etc.)  There is a simple program (showcap) included in the ray_cs
-package which parses the 802.11 headers.
-
-Known Problems and missing features
-
-	Does not work with non x86
-
-	Does not work with SMP
-
-	Support for defragmenting frames is not yet debugged, and in
-	fact is known to not work.  I have never encountered a net set
-	up to fragment, but still, it should be fixed.
-
-	The ioctl support is incomplete.  The hardware address cannot be set
-	using ifconfig yet.  If a different hardware address is needed, it may
-	be set using the phy_addr parameter in ray_cs.opts.  This requires
-	a card insertion to take effect.
diff --git linux-libre-6.7-gnu/Documentation/networking/devlink/devlink-port.rst linux-libre-6.8-gnu/Documentation/networking/devlink/devlink-port.rst
index e33ad2401ad7..562f46b41274 100644
--- linux-libre-6.7-gnu/Documentation/networking/devlink/devlink-port.rst
+++ linux-libre-6.8-gnu/Documentation/networking/devlink/devlink-port.rst
@@ -126,7 +126,7 @@ Users may also set the RoCE capability of the function using
 `devlink port function set roce` command.
 
 Users may also set the function as migratable using
-'devlink port function set migratable' command.
+`devlink port function set migratable` command.
 
 Users may also set the IPsec crypto capability of the function using
 `devlink port function set ipsec_crypto` command.
diff --git linux-libre-6.7-gnu/Documentation/networking/devlink/devlink-reload.rst linux-libre-6.8-gnu/Documentation/networking/devlink/devlink-reload.rst
index 505d22da027d..2fb0269b2054 100644
--- linux-libre-6.7-gnu/Documentation/networking/devlink/devlink-reload.rst
+++ linux-libre-6.8-gnu/Documentation/networking/devlink/devlink-reload.rst
@@ -22,8 +22,17 @@ By default ``driver_reinit`` action is selected.
    * - ``driver-reinit``
      - Devlink driver entities re-initialization, including applying
        new values to devlink entities which are used during driver
-       load such as ``devlink-params`` in configuration mode
-       ``driverinit`` or ``devlink-resources``
+       load which are:
+
+       * ``devlink-params`` in configuration mode ``driverinit``
+       * ``devlink-resources``
+
+       Other devlink entities may stay over the re-initialization:
+
+       * ``devlink-health-reporter``
+       * ``devlink-region``
+
+       The rest of the devlink entities have to be removed and readded.
    * - ``fw_activate``
      - Firmware activate. Activates new firmware if such image is stored and
        pending activation. If no limitation specified this action may involve
diff --git linux-libre-6.7-gnu/Documentation/networking/devlink/ice.rst linux-libre-6.8-gnu/Documentation/networking/devlink/ice.rst
index 2f60e34ab926..7f30ebd5debb 100644
--- linux-libre-6.7-gnu/Documentation/networking/devlink/ice.rst
+++ linux-libre-6.8-gnu/Documentation/networking/devlink/ice.rst
@@ -38,6 +38,10 @@ The ``ice`` driver reports the following versions
       - fixed
       - K65390-000
       - The Product Board Assembly (PBA) identifier of the board.
+    * - ``cgu.id``
+      - fixed
+      - 36
+      - The Clock Generation Unit (CGU) hardware revision identifier.
     * - ``fw.mgmt``
       - running
       - 2.1.7
@@ -104,6 +108,11 @@ The ``ice`` driver reports the following versions
       - running
       - 0xee16ced7
       - The first 4 bytes of the hash of the netlist module contents.
+    * - ``fw.cgu``
+      - running
+      - 8032.16973825.6021
+      - The version of Clock Generation Unit (CGU). Format:
+        <CGU type>.<configuration version>.<firmware version>.
 
 Flash Update
 ============
diff --git linux-libre-6.7-gnu/Documentation/networking/ethtool-netlink.rst linux-libre-6.8-gnu/Documentation/networking/ethtool-netlink.rst
index 2540c70952ff..d583d9abf2f8 100644
--- linux-libre-6.7-gnu/Documentation/networking/ethtool-netlink.rst
+++ linux-libre-6.8-gnu/Documentation/networking/ethtool-netlink.rst
@@ -223,6 +223,9 @@ Userspace to kernel:
   ``ETHTOOL_MSG_PSE_SET``               set PSE parameters
   ``ETHTOOL_MSG_PSE_GET``               get PSE parameters
   ``ETHTOOL_MSG_RSS_GET``               get RSS settings
+  ``ETHTOOL_MSG_PLCA_GET_CFG``          get PLCA RS parameters
+  ``ETHTOOL_MSG_PLCA_SET_CFG``          set PLCA RS parameters
+  ``ETHTOOL_MSG_PLCA_GET_STATUS``       get PLCA RS status
   ``ETHTOOL_MSG_MM_GET``                get MAC merge layer state
   ``ETHTOOL_MSG_MM_SET``                set MAC merge layer parameters
   ===================================== =================================
@@ -267,6 +270,9 @@ Kernel to userspace:
   ``ETHTOOL_MSG_MODULE_GET_REPLY``         transceiver module parameters
   ``ETHTOOL_MSG_PSE_GET_REPLY``            PSE parameters
   ``ETHTOOL_MSG_RSS_GET_REPLY``            RSS settings
+  ``ETHTOOL_MSG_PLCA_GET_CFG_REPLY``       PLCA RS parameters
+  ``ETHTOOL_MSG_PLCA_GET_STATUS_REPLY``    PLCA RS status
+  ``ETHTOOL_MSG_PLCA_NTF``                 PLCA RS parameters
   ``ETHTOOL_MSG_MM_GET_REPLY``             MAC merge layer status
   ======================================== =================================
 
@@ -1768,12 +1774,16 @@ Kernel response contents:
   ``ETHTOOL_A_RSS_HFUNC``              u32     RSS hash func
   ``ETHTOOL_A_RSS_INDIR``              binary  Indir table bytes
   ``ETHTOOL_A_RSS_HKEY``               binary  Hash key bytes
+  ``ETHTOOL_A_RSS_INPUT_XFRM``         u32     RSS input data transformation
 =====================================  ======  ==========================
 
 ETHTOOL_A_RSS_HFUNC attribute is bitmap indicating the hash function
 being used. Current supported options are toeplitz, xor or crc32.
-ETHTOOL_A_RSS_INDIR attribute returns RSS indrection table where each byte
+ETHTOOL_A_RSS_INDIR attribute returns RSS indirection table where each byte
 indicates queue number.
+ETHTOOL_A_RSS_INPUT_XFRM attribute is a bitmap indicating the type of
+transformation applied to the input protocol fields before given to the RSS
+hfunc. Current supported option is symmetric-xor.
 
 PLCA_GET_CFG
 ============
diff --git linux-libre-6.7-gnu/Documentation/networking/index.rst linux-libre-6.8-gnu/Documentation/networking/index.rst
index 683eb42309cc..69f3d6dcd9fd 100644
--- linux-libre-6.7-gnu/Documentation/networking/index.rst
+++ linux-libre-6.8-gnu/Documentation/networking/index.rst
@@ -55,6 +55,7 @@ Contents:
    filter
    generic-hdlc
    generic_netlink
+   netlink_spec/index
    gen_stats
    gtp
    ila
@@ -74,6 +75,7 @@ Contents:
    mptcp-sysctl
    multiqueue
    napi
+   net_cachelines/index
    netconsole
    netdev-features
    netdevices
@@ -123,6 +125,7 @@ Contents:
    xfrm_sync
    xfrm_sysctl
    xdp-rx-metadata
+   xsk-tx-metadata
 
 .. only::  subproject and html
 
diff --git linux-libre-6.7-gnu/Documentation/networking/net_cachelines/index.rst linux-libre-6.8-gnu/Documentation/networking/net_cachelines/index.rst
new file mode 100644
index 000000000000..2669e4cda086
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/networking/net_cachelines/index.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. Copyright (C) 2023 Google LLC
+
+===================================
+Common Networking Struct Cachelines
+===================================
+
+.. toctree::
+   :maxdepth: 1
+
+   inet_connection_sock
+   inet_sock
+   net_device
+   netns_ipv4_sysctl
+   snmp
+   tcp_sock
diff --git linux-libre-6.7-gnu/Documentation/networking/net_cachelines/inet_connection_sock.rst linux-libre-6.8-gnu/Documentation/networking/net_cachelines/inet_connection_sock.rst
new file mode 100644
index 000000000000..7a911dc95652
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/networking/net_cachelines/inet_connection_sock.rst
@@ -0,0 +1,50 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. Copyright (C) 2023 Google LLC
+
+=====================================================
+inet_connection_sock struct fast path usage breakdown
+=====================================================
+
+Type                                Name                   fastpath_tx_access  fastpath_rx_access  comment
+..struct                            ..inet_connection_sock                                         
+struct_inet_sock                    icsk_inet              read_mostly         read_mostly         tcp_init_buffer_space,tcp_init_transfer,tcp_finish_connect,tcp_connect,tcp_send_rcvq,tcp_send_syn_data
+struct_request_sock_queue           icsk_accept_queue      -                   -                   
+struct_inet_bind_bucket             icsk_bind_hash         read_mostly         -                   tcp_set_state
+struct_inet_bind2_bucket            icsk_bind2_hash        read_mostly         -                   tcp_set_state,inet_put_port
+unsigned_long                       icsk_timeout           read_mostly         -                   inet_csk_reset_xmit_timer,tcp_connect
+struct_timer_list                   icsk_retransmit_timer  read_mostly         -                   inet_csk_reset_xmit_timer,tcp_connect
+struct_timer_list                   icsk_delack_timer      read_mostly         -                   inet_csk_reset_xmit_timer,tcp_connect
+u32                                 icsk_rto               read_write          -                   tcp_cwnd_validate,tcp_schedule_loss_probe,tcp_connect_init,tcp_connect,tcp_write_xmit,tcp_push_one
+u32                                 icsk_rto_min           -                   -                   
+u32                                 icsk_delack_max        -                   -                   
+u32                                 icsk_pmtu_cookie       read_write          -                   tcp_sync_mss,tcp_current_mss,tcp_send_syn_data,tcp_connect_init,tcp_connect
+struct_tcp_congestion_ops           icsk_ca_ops            read_write          -                   tcp_cwnd_validate,tcp_tso_segs,tcp_ca_dst_init,tcp_connect_init,tcp_connect,tcp_write_xmit
+struct_inet_connection_sock_af_ops  icsk_af_ops            read_mostly         -                   tcp_finish_connect,tcp_send_syn_data,tcp_mtup_init,tcp_mtu_check_reprobe,tcp_mtu_probe,tcp_connect_init,tcp_connect,__tcp_transmit_skb
+struct_tcp_ulp_ops*                 icsk_ulp_ops           -                   -                   
+void*                               icsk_ulp_data          -                   -                   
+u8:5                                icsk_ca_state          read_write          -                   tcp_cwnd_application_limited,tcp_set_ca_state,tcp_enter_cwr,tcp_tso_should_defer,tcp_mtu_probe,tcp_schedule_loss_probe,tcp_write_xmit,__tcp_transmit_skb
+u8:1                                icsk_ca_initialized    read_write          -                   tcp_init_transfer,tcp_init_congestion_control,tcp_init_transfer,tcp_finish_connect,tcp_connect
+u8:1                                icsk_ca_setsockopt     -                   -                   
+u8:1                                icsk_ca_dst_locked     write_mostly        -                   tcp_ca_dst_init,tcp_connect_init,tcp_connect
+u8                                  icsk_retransmits       write_mostly        -                   tcp_connect_init,tcp_connect
+u8                                  icsk_pending           read_write          -                   inet_csk_reset_xmit_timer,tcp_connect,tcp_check_probe_timer,__tcp_push_pending_frames,tcp_rearm_rto,tcp_event_new_data_sent,tcp_event_new_data_sent
+u8                                  icsk_backoff           write_mostly        -                   tcp_write_queue_purge,tcp_connect_init
+u8                                  icsk_syn_retries       -                   -                   
+u8                                  icsk_probes_out        -                   -                   
+u16                                 icsk_ext_hdr_len       read_mostly         -                   __tcp_mtu_to_mss,tcp_mtu_to_rss,tcp_mtu_probe,tcp_write_xmit,tcp_mtu_to_mss,
+struct_icsk_ack_u8                  pending                read_write          read_write          inet_csk_ack_scheduled,__tcp_cleanup_rbuf,tcp_cleanup_rbuf,inet_csk_clear_xmit_timer,tcp_event_ack-sent,inet_csk_reset_xmit_timer
+struct_icsk_ack_u8                  quick                  read_write          write_mostly        tcp_dec_quickack_mode,tcp_event_ack_sent,__tcp_transmit_skb,__tcp_select_window,__tcp_cleanup_rbuf
+struct_icsk_ack_u8                  pingpong               -                   -                   
+struct_icsk_ack_u8                  retry                  write_mostly        read_write          inet_csk_clear_xmit_timer,tcp_rearm_rto,tcp_event_new_data_sent,tcp_write_xmit,__tcp_send_ack,tcp_send_ack,
+struct_icsk_ack_u8                  ato                    read_mostly         write_mostly        tcp_dec_quickack_mode,tcp_event_ack_sent,__tcp_transmit_skb,__tcp_send_ack,tcp_send_ack
+struct_icsk_ack_unsigned_long       timeout                read_write          read_write          inet_csk_reset_xmit_timer,tcp_connect
+struct_icsk_ack_u32                 lrcvtime               read_write          -                   tcp_finish_connect,tcp_connect,tcp_event_data_sent,__tcp_transmit_skb
+struct_icsk_ack_u16                 rcv_mss                write_mostly        read_mostly         __tcp_select_window,__tcp_cleanup_rbuf,tcp_initialize_rcv_mss,tcp_connect_init
+struct_icsk_mtup_int                search_high            read_write          -                   tcp_mtup_init,tcp_sync_mss,tcp_connect_init,tcp_mtu_check_reprobe,tcp_write_xmit
+struct_icsk_mtup_int                search_low             read_write          -                   tcp_mtu_probe,tcp_mtu_check_reprobe,tcp_write_xmit,tcp_sync_mss,tcp_connect_init,tcp_mtup_init
+struct_icsk_mtup_u32:31             probe_size             read_write          -                   tcp_mtup_init,tcp_connect_init,__tcp_transmit_skb
+struct_icsk_mtup_u32:1              enabled                read_write          -                   tcp_mtup_init,tcp_sync_mss,tcp_connect_init,tcp_mtu_probe,tcp_write_xmit
+struct_icsk_mtup_u32                probe_timestamp        read_write          -                   tcp_mtup_init,tcp_connect_init,tcp_mtu_check_reprobe,tcp_mtu_probe
+u32                                 icsk_probes_tstamp     -                   -                   
+u32                                 icsk_user_timeout      -                   -                   
+u64[104/sizeof(u64)]                icsk_ca_priv           -                   -                   
diff --git linux-libre-6.7-gnu/Documentation/networking/net_cachelines/inet_sock.rst linux-libre-6.8-gnu/Documentation/networking/net_cachelines/inet_sock.rst
new file mode 100644
index 000000000000..595d7ef5fc8b
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/networking/net_cachelines/inet_sock.rst
@@ -0,0 +1,44 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. Copyright (C) 2023 Google LLC
+
+==========================================
+inet_sock struct fast path usage breakdown
+==========================================
+
+Type                    Name                  fastpath_tx_access  fastpath_rx_access  comment
+..struct                ..inet_sock                                                     
+struct_sock             sk                    read_mostly         read_mostly         tcp_init_buffer_space,tcp_init_transfer,tcp_finish_connect,tcp_connect,tcp_send_rcvq,tcp_send_syn_data
+struct_ipv6_pinfo*      pinet6                -                   -                   
+be16                    inet_sport            read_mostly         -                   __tcp_transmit_skb
+be32                    inet_daddr            read_mostly         -                   ip_select_ident_segs
+be32                    inet_rcv_saddr        -                   -                   
+be16                    inet_dport            read_mostly         -                   __tcp_transmit_skb
+u16                     inet_num              -                   -                   
+be32                    inet_saddr            -                   -                   
+s16                     uc_ttl                read_mostly         -                   __ip_queue_xmit/ip_select_ttl
+u16                     cmsg_flags            -                   -                   
+struct_ip_options_rcu*  inet_opt              read_mostly         -                   __ip_queue_xmit
+u16                     inet_id               read_mostly         -                   ip_select_ident_segs
+u8                      tos                   read_mostly         -                   ip_queue_xmit
+u8                      min_ttl               -                   -                   
+u8                      mc_ttl                -                   -                   
+u8                      pmtudisc              -                   -                   
+u8:1                    recverr               -                   -                   
+u8:1                    is_icsk               -                   -                   
+u8:1                    freebind              -                   -                   
+u8:1                    hdrincl               -                   -                   
+u8:1                    mc_loop               -                   -                   
+u8:1                    transparent           -                   -                   
+u8:1                    mc_all                -                   -                   
+u8:1                    nodefrag              -                   -                   
+u8:1                    bind_address_no_port  -                   -                   
+u8:1                    recverr_rfc4884       -                   -                   
+u8:1                    defer_connect         read_mostly         -                   tcp_sendmsg_fastopen
+u8                      rcv_tos               -                   -                   
+u8                      convert_csum          -                   -                   
+int                     uc_index              -                   -                   
+int                     mc_index              -                   -                   
+be32                    mc_addr               -                   -                   
+struct_ip_mc_socklist*  mc_list               -                   -                   
+struct_inet_cork_full   cork                  read_mostly         -                   __tcp_transmit_skb
+struct                  local_port_range      -                   -                   
diff --git linux-libre-6.7-gnu/Documentation/networking/net_cachelines/net_device.rst linux-libre-6.8-gnu/Documentation/networking/net_cachelines/net_device.rst
new file mode 100644
index 000000000000..dceb49d56a91
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/networking/net_cachelines/net_device.rst
@@ -0,0 +1,178 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. Copyright (C) 2023 Google LLC
+
+===========================================
+net_device struct fast path usage breakdown
+===========================================
+
+Type                                Name                    fastpath_tx_access  fastpath_rx_access  Comments
+..struct                            ..net_device                                                    
+char                                name[16]                -                   -                   
+struct_netdev_name_node*            name_node                                                       
+struct_dev_ifalias*                 ifalias                                                         
+unsigned_long                       mem_end                                                         
+unsigned_long                       mem_start                                                       
+unsigned_long                       base_addr                                                       
+unsigned_long                       state                                                           
+struct_list_head                    dev_list                                                        
+struct_list_head                    napi_list                                                       
+struct_list_head                    unreg_list                                                      
+struct_list_head                    close_list                                                      
+struct_list_head                    ptype_all               read_mostly         -                   dev_nit_active(tx)
+struct_list_head                    ptype_specific                              read_mostly         deliver_ptype_list_skb/__netif_receive_skb_core(rx)
+struct                              adj_list                                                        
+unsigned_int                        flags                   read_mostly         read_mostly         __dev_queue_xmit,__dev_xmit_skb,ip6_output,__ip6_finish_output(tx);ip6_rcv_core(rx)
+xdp_features_t                      xdp_features                                                    
+unsigned_long_long                  priv_flags              read_mostly         -                   __dev_queue_xmit(tx)
+struct_net_device_ops*              netdev_ops              read_mostly         -                   netdev_core_pick_tx,netdev_start_xmit(tx)
+struct_xdp_metadata_ops*            xdp_metadata_ops                                                
+int                                 ifindex                 -                   read_mostly         ip6_rcv_core
+unsigned_short                      gflags                                                          
+unsigned_short                      hard_header_len         read_mostly         read_mostly         ip6_xmit(tx);gro_list_prepare(rx)
+unsigned_int                        mtu                     read_mostly         -                   ip_finish_output2
+unsigned_short                      needed_headroom         read_mostly         -                   LL_RESERVED_SPACE/ip_finish_output2
+unsigned_short                      needed_tailroom                                                 
+netdev_features_t                   features                read_mostly         read_mostly         HARD_TX_LOCK,netif_skb_features,sk_setup_caps(tx);netif_elide_gro(rx)
+netdev_features_t                   hw_features                                                     
+netdev_features_t                   wanted_features                                                 
+netdev_features_t                   vlan_features                                                   
+netdev_features_t                   hw_enc_features         -                   -                   netif_skb_features
+netdev_features_t                   mpls_features                                                   
+netdev_features_t                   gso_partial_features    read_mostly                             gso_features_check
+unsigned_int                        min_mtu                                                         
+unsigned_int                        max_mtu                                                         
+unsigned_short                      type                                                            
+unsigned_char                       min_header_len                                                  
+unsigned_char                       name_assign_type                                                
+int                                 group                                                           
+struct_net_device_stats             stats                                                           
+struct_net_device_core_stats*       core_stats                                                      
+atomic_t                            carrier_up_count                                                
+atomic_t                            carrier_down_count                                              
+struct_iw_handler_def*              wireless_handlers                                               
+struct_iw_public_data*              wireless_data                                                   
+struct_ethtool_ops*                 ethtool_ops                                                     
+struct_l3mdev_ops*                  l3mdev_ops                                                      
+struct_ndisc_ops*                   ndisc_ops                                                       
+struct_xfrmdev_ops*                 xfrmdev_ops                                                     
+struct_tlsdev_ops*                  tlsdev_ops                                                      
+struct_header_ops*                  header_ops              read_mostly         -                   ip_finish_output2,ip6_finish_output2(tx)
+unsigned_char                       operstate                                                       
+unsigned_char                       link_mode                                                       
+unsigned_char                       if_port                                                         
+unsigned_char                       dma                                                             
+unsigned_char                       perm_addr[32]                                                   
+unsigned_char                       addr_assign_type                                                
+unsigned_char                       addr_len                                                        
+unsigned_char                       upper_level                                                     
+unsigned_char                       lower_level                                                     
+unsigned_short                      neigh_priv_len                                                  
+unsigned_short                      padded                                                          
+unsigned_short                      dev_id                                                          
+unsigned_short                      dev_port                                                        
+spinlock_t                          addr_list_lock                                                  
+int                                 irq                                                             
+struct_netdev_hw_addr_list          uc                                                              
+struct_netdev_hw_addr_list          mc                                                              
+struct_netdev_hw_addr_list          dev_addrs                                                       
+struct_kset*                        queues_kset                                                     
+struct_list_head                    unlink_list                                                     
+unsigned_int                        promiscuity                                                     
+unsigned_int                        allmulti                                                        
+bool                                uc_promisc                                                      
+unsigned_char                       nested_level                                                    
+struct_in_device*                   ip_ptr                  read_mostly         read_mostly         __in_dev_get
+struct_inet6_dev*                   ip6_ptr                 read_mostly         read_mostly         __in6_dev_get
+struct_vlan_info*                   vlan_info                                                       
+struct_dsa_port*                    dsa_ptr                                                         
+struct_tipc_bearer*                 tipc_ptr                                                        
+void*                               atalk_ptr                                                       
+void*                               ax25_ptr                                                        
+struct_wireless_dev*                ieee80211_ptr                                                   
+struct_wpan_dev*                    ieee802154_ptr                                                  
+struct_mpls_dev*                    mpls_ptr                                                        
+struct_mctp_dev*                    mctp_ptr                                                        
+unsigned_char*                      dev_addr                                                        
+struct_netdev_queue*                _rx                     read_mostly         -                   netdev_get_rx_queue(rx)
+unsigned_int                        num_rx_queues                                                   
+unsigned_int                        real_num_rx_queues      -                   read_mostly         get_rps_cpu
+struct_bpf_prog*                    xdp_prog                -                   read_mostly         netif_elide_gro()
+unsigned_long                       gro_flush_timeout       -                   read_mostly         napi_complete_done
+int                                 napi_defer_hard_irqs    -                   read_mostly         napi_complete_done
+unsigned_int                        gro_max_size            -                   read_mostly         skb_gro_receive
+unsigned_int                        gro_ipv4_max_size       -                   read_mostly         skb_gro_receive
+rx_handler_func_t*                  rx_handler              read_mostly         -                   __netif_receive_skb_core
+void*                               rx_handler_data         read_mostly         -                   
+struct_netdev_queue*                ingress_queue           read_mostly         -                   
+struct_bpf_mprog_entry              tcx_ingress             -                   read_mostly         sch_handle_ingress
+struct_nf_hook_entries*             nf_hooks_ingress                                                
+unsigned_char                       broadcast[32]                                                   
+struct_cpu_rmap*                    rx_cpu_rmap                                                     
+struct_hlist_node                   index_hlist                                                     
+struct_netdev_queue*                _tx                     read_mostly         -                   netdev_get_tx_queue(tx)
+unsigned_int                        num_tx_queues           -                   -                   
+unsigned_int                        real_num_tx_queues      read_mostly         -                   skb_tx_hash,netdev_core_pick_tx(tx)
+unsigned_int                        tx_queue_len                                                    
+spinlock_t                          tx_global_lock                                                  
+struct_xdp_dev_bulk_queue__percpu*  xdp_bulkq                                                       
+struct_xps_dev_maps*                xps_maps[2]             read_mostly         -                   __netif_set_xps_queue
+struct_bpf_mprog_entry              tcx_egress              read_mostly         -                   sch_handle_egress
+struct_nf_hook_entries*             nf_hooks_egress         read_mostly         -                   
+struct_hlist_head                   qdisc_hash[16]                                                  
+struct_timer_list                   watchdog_timer                                                  
+int                                 watchdog_timeo                                                  
+u32                                 proto_down_reason                                               
+struct_list_head                    todo_list                                                       
+int__percpu*                        pcpu_refcnt                                                     
+refcount_t                          dev_refcnt                                                      
+struct_ref_tracker_dir              refcnt_tracker                                                  
+struct_list_head                    link_watch_list                                                 
+enum:8                              reg_state                                                       
+bool                                dismantle                                                       
+enum:16                             rtnl_link_state                                                 
+bool                                needs_free_netdev                                               
+void*priv_destructor                struct_net_device                                               
+struct_netpoll_info*                npinfo                  -                   read_mostly         napi_poll/napi_poll_lock
+possible_net_t                      nd_net                  -                   read_mostly         (dev_net)napi_busy_loop,tcp_v(4/6)_rcv,ip(v6)_rcv,ip(6)_input,ip(6)_input_finish
+void*                               ml_priv                                                         
+enum_netdev_ml_priv_type            ml_priv_type                                                    
+struct_pcpu_lstats__percpu*         lstats                  read_mostly                             dev_lstats_add()
+struct_pcpu_sw_netstats__percpu*    tstats                  read_mostly                             dev_sw_netstats_tx_add()
+struct_pcpu_dstats__percpu*         dstats                                                          
+struct_garp_port*                   garp_port                                                       
+struct_mrp_port*                    mrp_port                                                        
+struct_dm_hw_stat_delta*            dm_private                                                      
+struct_device                       dev                     -                   -                   
+struct_attribute_group*             sysfs_groups[4]                                                 
+struct_attribute_group*             sysfs_rx_queue_group                                            
+struct_rtnl_link_ops*               rtnl_link_ops                                                   
+unsigned_int                        gso_max_size            read_mostly         -                   sk_dst_gso_max_size
+unsigned_int                        tso_max_size                                                    
+u16                                 gso_max_segs            read_mostly         -                   gso_max_segs
+u16                                 tso_max_segs                                                    
+unsigned_int                        gso_ipv4_max_size       read_mostly         -                   sk_dst_gso_max_size
+struct_dcbnl_rtnl_ops*              dcbnl_ops                                                       
+s16                                 num_tc                  read_mostly         -                   skb_tx_hash
+struct_netdev_tc_txq                tc_to_txq[16]           read_mostly         -                   skb_tx_hash
+u8                                  prio_tc_map[16]                                                 
+unsigned_int                        fcoe_ddp_xid                                                    
+struct_netprio_map*                 priomap                                                         
+struct_phy_device*                  phydev                                                          
+struct_sfp_bus*                     sfp_bus                                                         
+struct_lock_class_key*              qdisc_tx_busylock                                               
+bool                                proto_down                                                      
+unsigned:1                          wol_enabled                                                     
+unsigned:1                          threaded                -                   -                   napi_poll(napi_enable,dev_set_threaded)
+struct_list_head                    net_notifier_list                                               
+struct_macsec_ops*                  macsec_ops                                                      
+struct_udp_tunnel_nic_info*         udp_tunnel_nic_info                                             
+struct_udp_tunnel_nic*              udp_tunnel_nic                                                  
+unsigned_int                        xdp_zc_max_segs                                                 
+struct_bpf_xdp_entity               xdp_state[3]                                                    
+u8                                  dev_addr_shadow[32]                                             
+netdevice_tracker                   linkwatch_dev_tracker                                           
+netdevice_tracker                   watchdog_dev_tracker                                            
+netdevice_tracker                   dev_registered_tracker                                          
+struct_rtnl_hw_stats64*             offload_xstats_l3                                               
+struct_devlink_port*                devlink_port                                                    
+struct_dpll_pin*                    dpll_pin                                                        
diff --git linux-libre-6.7-gnu/Documentation/networking/net_cachelines/netns_ipv4_sysctl.rst linux-libre-6.8-gnu/Documentation/networking/net_cachelines/netns_ipv4_sysctl.rst
new file mode 100644
index 000000000000..9b87089a84c6
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/networking/net_cachelines/netns_ipv4_sysctl.rst
@@ -0,0 +1,158 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. Copyright (C) 2023 Google LLC
+
+===========================================
+netns_ipv4 struct fast path usage breakdown
+===========================================
+
+Type                            Name                                         fastpath_tx_access  fastpath_rx_access  comment
+..struct                        ..netns_ipv4                                                                         
+struct_inet_timewait_death_row  tcp_death_row                                                                        
+struct_udp_table*               udp_table                                                                            
+struct_ctl_table_header*        forw_hdr                                                                             
+struct_ctl_table_header*        frags_hdr                                                                            
+struct_ctl_table_header*        ipv4_hdr                                                                             
+struct_ctl_table_header*        route_hdr                                                                            
+struct_ctl_table_header*        xfrm4_hdr                                                                            
+struct_ipv4_devconf*            devconf_all                                                                          
+struct_ipv4_devconf*            devconf_dflt                                                                         
+struct_ip_ra_chain              ra_chain                                                                             
+struct_mutex                    ra_mutex                                                                             
+struct_fib_rules_ops*           rules_ops                                                                            
+struct_fib_table                fib_main                                                                             
+struct_fib_table                fib_default                                                                          
+unsigned_int                    fib_rules_require_fldissect                                                          
+bool                            fib_has_custom_rules                                                                 
+bool                            fib_has_custom_local_routes                                                          
+bool                            fib_offload_disabled                                                                 
+atomic_t                        fib_num_tclassid_users                                                               
+struct_hlist_head*              fib_table_hash                                                                       
+struct_sock*                    fibnl                                                                                
+struct_sock*                    mc_autojoin_sk                                                                       
+struct_inet_peer_base*          peers                                                                                
+struct_fqdir*                   fqdir                                                                                
+u8                              sysctl_icmp_echo_ignore_all                                                          
+u8                              sysctl_icmp_echo_enable_probe                                                        
+u8                              sysctl_icmp_echo_ignore_broadcasts                                                   
+u8                              sysctl_icmp_ignore_bogus_error_responses                                             
+u8                              sysctl_icmp_errors_use_inbound_ifaddr                                                
+int                             sysctl_icmp_ratelimit                                                                
+int                             sysctl_icmp_ratemask                                                                 
+u32                             ip_rt_min_pmtu                               -                   -                   
+int                             ip_rt_mtu_expires                            -                   -                   
+int                             ip_rt_min_advmss                             -                   -                   
+struct_local_ports              ip_local_ports                               -                   -                   
+u8                              sysctl_tcp_ecn                               -                   -                   
+u8                              sysctl_tcp_ecn_fallback                      -                   -                   
+u8                              sysctl_ip_default_ttl                        -                   -                   ip4_dst_hoplimit/ip_select_ttl
+u8                              sysctl_ip_no_pmtu_disc                       -                   -                   
+u8                              sysctl_ip_fwd_use_pmtu                       read_mostly         -                   ip_dst_mtu_maybe_forward/ip_skb_dst_mtu
+u8                              sysctl_ip_fwd_update_priority                -                   -                   ip_forward
+u8                              sysctl_ip_nonlocal_bind                      -                   -                   
+u8                              sysctl_ip_autobind_reuse                     -                   -                   
+u8                              sysctl_ip_dynaddr                            -                   -                   
+u8                              sysctl_ip_early_demux                        -                   read_mostly         ip(6)_rcv_finish_core
+u8                              sysctl_raw_l3mdev_accept                     -                   -                   
+u8                              sysctl_tcp_early_demux                       -                   read_mostly         ip(6)_rcv_finish_core
+u8                              sysctl_udp_early_demux                                                               
+u8                              sysctl_nexthop_compat_mode                   -                   -                   
+u8                              sysctl_fwmark_reflect                        -                   -                   
+u8                              sysctl_tcp_fwmark_accept                     -                   -                   
+u8                              sysctl_tcp_l3mdev_accept                     -                   -                   
+u8                              sysctl_tcp_mtu_probing                       -                   -                   
+int                             sysctl_tcp_mtu_probe_floor                   -                   -                   
+int                             sysctl_tcp_base_mss                          -                   -                   
+int                             sysctl_tcp_min_snd_mss                       read_mostly         -                   __tcp_mtu_to_mss(tcp_write_xmit)
+int                             sysctl_tcp_probe_threshold                   -                   -                   tcp_mtu_probe(tcp_write_xmit)
+u32                             sysctl_tcp_probe_interval                    -                   -                   tcp_mtu_check_reprobe(tcp_write_xmit)
+int                             sysctl_tcp_keepalive_time                    -                   -                   
+int                             sysctl_tcp_keepalive_intvl                   -                   -                   
+u8                              sysctl_tcp_keepalive_probes                  -                   -                   
+u8                              sysctl_tcp_syn_retries                       -                   -                   
+u8                              sysctl_tcp_synack_retries                    -                   -                   
+u8                              sysctl_tcp_syncookies                        -                   -                   generated_on_syn
+u8                              sysctl_tcp_migrate_req                       -                   -                   reuseport
+u8                              sysctl_tcp_comp_sack_nr                      -                   -                   __tcp_ack_snd_check
+int                             sysctl_tcp_reordering                        -                   read_mostly         tcp_may_raise_cwnd/tcp_cong_control
+u8                              sysctl_tcp_retries1                          -                   -                   
+u8                              sysctl_tcp_retries2                          -                   -                   
+u8                              sysctl_tcp_orphan_retries                    -                   -                   
+u8                              sysctl_tcp_tw_reuse                          -                   -                   timewait_sock_ops
+int                             sysctl_tcp_fin_timeout                       -                   -                   TCP_LAST_ACK/tcp_rcv_state_process
+unsigned_int                    sysctl_tcp_notsent_lowat                     read_mostly         -                   tcp_notsent_lowat/tcp_stream_memory_free
+u8                              sysctl_tcp_sack                              -                   -                   tcp_syn_options
+u8                              sysctl_tcp_window_scaling                    -                   -                   tcp_syn_options,tcp_parse_options
+u8                              sysctl_tcp_timestamps                                                                
+u8                              sysctl_tcp_early_retrans                     read_mostly         -                   tcp_schedule_loss_probe(tcp_write_xmit)
+u8                              sysctl_tcp_recovery                          -                   -                   tcp_fastretrans_alert
+u8                              sysctl_tcp_thin_linear_timeouts              -                   -                   tcp_retrans_timer(on_thin_streams)
+u8                              sysctl_tcp_slow_start_after_idle             -                   -                   unlikely(tcp_cwnd_validate-network-not-starved)
+u8                              sysctl_tcp_retrans_collapse                  -                   -                   
+u8                              sysctl_tcp_stdurg                            -                   -                   unlikely(tcp_check_urg)
+u8                              sysctl_tcp_rfc1337                           -                   -                   
+u8                              sysctl_tcp_abort_on_overflow                 -                   -                   
+u8                              sysctl_tcp_fack                              -                   -                   
+int                             sysctl_tcp_max_reordering                    -                   -                   tcp_check_sack_reordering
+int                             sysctl_tcp_adv_win_scale                     -                   -                   tcp_init_buffer_space
+u8                              sysctl_tcp_dsack                             -                   -                   partial_packet_or_retrans_in_tcp_data_queue
+u8                              sysctl_tcp_app_win                           -                   -                   tcp_win_from_space
+u8                              sysctl_tcp_frto                              -                   -                   tcp_enter_loss
+u8                              sysctl_tcp_nometrics_save                    -                   -                   TCP_LAST_ACK/tcp_update_metrics
+u8                              sysctl_tcp_no_ssthresh_metrics_save          -                   -                   TCP_LAST_ACK/tcp_(update/init)_metrics
+u8                              sysctl_tcp_moderate_rcvbuf                   read_mostly         read_mostly         tcp_tso_should_defer(tx);tcp_rcv_space_adjust(rx)
+u8                              sysctl_tcp_tso_win_divisor                   read_mostly         -                   tcp_tso_should_defer(tcp_write_xmit)
+u8                              sysctl_tcp_workaround_signed_windows         -                   -                   tcp_select_window
+int                             sysctl_tcp_limit_output_bytes                read_mostly         -                   tcp_small_queue_check(tcp_write_xmit)
+int                             sysctl_tcp_challenge_ack_limit               -                   -                   
+int                             sysctl_tcp_min_rtt_wlen                      read_mostly         -                   tcp_ack_update_rtt
+u8                              sysctl_tcp_min_tso_segs                      -                   -                   unlikely(icsk_ca_ops-written)
+u8                              sysctl_tcp_tso_rtt_log                       read_mostly         -                   tcp_tso_autosize
+u8                              sysctl_tcp_autocorking                       read_mostly         -                   tcp_push/tcp_should_autocork
+u8                              sysctl_tcp_reflect_tos                       -                   -                   tcp_v(4/6)_send_synack
+int                             sysctl_tcp_invalid_ratelimit                 -                   -                   
+int                             sysctl_tcp_pacing_ss_ratio                   -                   -                   default_cong_cont(tcp_update_pacing_rate)
+int                             sysctl_tcp_pacing_ca_ratio                   -                   -                   default_cong_cont(tcp_update_pacing_rate)
+int                             sysctl_tcp_wmem[3]                           read_mostly         -                   tcp_wmem_schedule(sendmsg/sendpage)
+int                             sysctl_tcp_rmem[3]                           -                   read_mostly         __tcp_grow_window(tx),tcp_rcv_space_adjust(rx)
+unsigned_int                    sysctl_tcp_child_ehash_entries                                                       
+unsigned_long                   sysctl_tcp_comp_sack_delay_ns                -                   -                   __tcp_ack_snd_check
+unsigned_long                   sysctl_tcp_comp_sack_slack_ns                -                   -                   __tcp_ack_snd_check
+int                             sysctl_max_syn_backlog                       -                   -                   
+int                             sysctl_tcp_fastopen                          -                   -                   
+struct_tcp_congestion_ops       tcp_congestion_control                       -                   -                   init_cc
+struct_tcp_fastopen_context     tcp_fastopen_ctx                             -                   -                   
+unsigned_int                    sysctl_tcp_fastopen_blackhole_timeout        -                   -                   
+atomic_t                        tfo_active_disable_times                     -                   -                   
+unsigned_long                   tfo_active_disable_stamp                     -                   -                   
+u32                             tcp_challenge_timestamp                      -                   -                   
+u32                             tcp_challenge_count                          -                   -                   
+u8                              sysctl_tcp_plb_enabled                       -                   -                   
+u8                              sysctl_tcp_plb_idle_rehash_rounds            -                   -                   
+u8                              sysctl_tcp_plb_rehash_rounds                 -                   -                   
+u8                              sysctl_tcp_plb_suspend_rto_sec               -                   -                   
+int                             sysctl_tcp_plb_cong_thresh                   -                   -                   
+int                             sysctl_udp_wmem_min                                                                  
+int                             sysctl_udp_rmem_min                                                                  
+u8                              sysctl_fib_notify_on_flag_change                                                     
+u8                              sysctl_udp_l3mdev_accept                                                             
+u8                              sysctl_igmp_llm_reports                                                              
+int                             sysctl_igmp_max_memberships                                                          
+int                             sysctl_igmp_max_msf                                                                  
+int                             sysctl_igmp_qrv                                                                      
+struct_ping_group_range         ping_group_range                                                                     
+atomic_t                        dev_addr_genid                                                                       
+unsigned_int                    sysctl_udp_child_hash_entries                                                        
+unsigned_long*                  sysctl_local_reserved_ports                                                          
+int                             sysctl_ip_prot_sock                                                                  
+struct_mr_table*                mrt                                                                                  
+struct_list_head                mr_tables                                                                            
+struct_fib_rules_ops*           mr_rules_ops                                                                         
+u32                             sysctl_fib_multipath_hash_fields                                                     
+u8                              sysctl_fib_multipath_use_neigh                                                       
+u8                              sysctl_fib_multipath_hash_policy                                                     
+struct_fib_notifier_ops*        notifier_ops                                                                         
+unsigned_int                    fib_seq                                                                              
+struct_fib_notifier_ops*        ipmr_notifier_ops                                                                    
+unsigned_int                    ipmr_seq                                                                             
+atomic_t                        rt_genid                                                                             
+siphash_key_t                   ip_id_key                                                                                      
diff --git linux-libre-6.7-gnu/Documentation/networking/net_cachelines/snmp.rst linux-libre-6.8-gnu/Documentation/networking/net_cachelines/snmp.rst
new file mode 100644
index 000000000000..6a071538566c
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/networking/net_cachelines/snmp.rst
@@ -0,0 +1,135 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. Copyright (C) 2023 Google LLC
+
+===========================================
+netns_ipv4 enum fast path usage breakdown
+===========================================
+
+Type           Name                                  fastpath_tx_access  fastpath_rx_access  comment
+..enum                                                                                       
+unsigned_long  LINUX_MIB_TCPKEEPALIVE                write_mostly        -                   tcp_keepalive_timer
+unsigned_long  LINUX_MIB_DELAYEDACKS                 write_mostly        -                   tcp_delack_timer_handler,tcp_delack_timer
+unsigned_long  LINUX_MIB_DELAYEDACKLOCKED            write_mostly        -                   tcp_delack_timer_handler,tcp_delack_timer
+unsigned_long  LINUX_MIB_TCPAUTOCORKING              write_mostly        -                   tcp_push,tcp_sendmsg_locked
+unsigned_long  LINUX_MIB_TCPFROMZEROWINDOWADV        write_mostly        -                   tcp_select_window,tcp_transmit-skb
+unsigned_long  LINUX_MIB_TCPTOZEROWINDOWADV          write_mostly        -                   tcp_select_window,tcp_transmit-skb
+unsigned_long  LINUX_MIB_TCPWANTZEROWINDOWADV        write_mostly        -                   tcp_select_window,tcp_transmit-skb
+unsigned_long  LINUX_MIB_TCPORIGDATASENT             write_mostly        -                   tcp_write_xmit
+unsigned_long  LINUX_MIB_TCPHPHITS                   -                   write_mostly        tcp_rcv_established,tcp_v4_do_rcv,tcp_v6_do_rcv
+unsigned_long  LINUX_MIB_TCPRCVCOALESCE              -                   write_mostly        tcp_try_coalesce,tcp_queue_rcv,tcp_rcv_established
+unsigned_long  LINUX_MIB_TCPPUREACKS                 -                   write_mostly        tcp_ack,tcp_rcv_established
+unsigned_long  LINUX_MIB_TCPHPACKS                   -                   write_mostly        tcp_ack,tcp_rcv_established
+unsigned_long  LINUX_MIB_TCPDELIVERED                -                   write_mostly        tcp_newly_delivered,tcp_ack,tcp_rcv_established
+unsigned_long  LINUX_MIB_SYNCOOKIESSENT                                                      
+unsigned_long  LINUX_MIB_SYNCOOKIESRECV                                                      
+unsigned_long  LINUX_MIB_SYNCOOKIESFAILED                                                    
+unsigned_long  LINUX_MIB_EMBRYONICRSTS                                                       
+unsigned_long  LINUX_MIB_PRUNECALLED                                                         
+unsigned_long  LINUX_MIB_RCVPRUNED                                                           
+unsigned_long  LINUX_MIB_OFOPRUNED                                                           
+unsigned_long  LINUX_MIB_OUTOFWINDOWICMPS                                                    
+unsigned_long  LINUX_MIB_LOCKDROPPEDICMPS                                                    
+unsigned_long  LINUX_MIB_ARPFILTER                                                           
+unsigned_long  LINUX_MIB_TIMEWAITED                                                          
+unsigned_long  LINUX_MIB_TIMEWAITRECYCLED                                                    
+unsigned_long  LINUX_MIB_TIMEWAITKILLED                                                      
+unsigned_long  LINUX_MIB_PAWSACTIVEREJECTED                                                  
+unsigned_long  LINUX_MIB_PAWSESTABREJECTED                                                   
+unsigned_long  LINUX_MIB_DELAYEDACKLOST                                                      
+unsigned_long  LINUX_MIB_LISTENOVERFLOWS                                                     
+unsigned_long  LINUX_MIB_LISTENDROPS                                                         
+unsigned_long  LINUX_MIB_TCPRENORECOVERY                                                     
+unsigned_long  LINUX_MIB_TCPSACKRECOVERY                                                     
+unsigned_long  LINUX_MIB_TCPSACKRENEGING                                                     
+unsigned_long  LINUX_MIB_TCPSACKREORDER                                                      
+unsigned_long  LINUX_MIB_TCPRENOREORDER                                                      
+unsigned_long  LINUX_MIB_TCPTSREORDER                                                        
+unsigned_long  LINUX_MIB_TCPFULLUNDO                                                         
+unsigned_long  LINUX_MIB_TCPPARTIALUNDO                                                      
+unsigned_long  LINUX_MIB_TCPDSACKUNDO                                                        
+unsigned_long  LINUX_MIB_TCPLOSSUNDO                                                         
+unsigned_long  LINUX_MIB_TCPLOSTRETRANSMIT                                                   
+unsigned_long  LINUX_MIB_TCPRENOFAILURES                                                     
+unsigned_long  LINUX_MIB_TCPSACKFAILURES                                                     
+unsigned_long  LINUX_MIB_TCPLOSSFAILURES                                                     
+unsigned_long  LINUX_MIB_TCPFASTRETRANS                                                      
+unsigned_long  LINUX_MIB_TCPSLOWSTARTRETRANS                                                 
+unsigned_long  LINUX_MIB_TCPTIMEOUTS                                                         
+unsigned_long  LINUX_MIB_TCPLOSSPROBES                                                       
+unsigned_long  LINUX_MIB_TCPLOSSPROBERECOVERY                                                
+unsigned_long  LINUX_MIB_TCPRENORECOVERYFAIL                                                 
+unsigned_long  LINUX_MIB_TCPSACKRECOVERYFAIL                                                 
+unsigned_long  LINUX_MIB_TCPRCVCOLLAPSED                                                     
+unsigned_long  LINUX_MIB_TCPDSACKOLDSENT                                                     
+unsigned_long  LINUX_MIB_TCPDSACKOFOSENT                                                     
+unsigned_long  LINUX_MIB_TCPDSACKRECV                                                        
+unsigned_long  LINUX_MIB_TCPDSACKOFORECV                                                     
+unsigned_long  LINUX_MIB_TCPABORTONDATA                                                      
+unsigned_long  LINUX_MIB_TCPABORTONCLOSE                                                     
+unsigned_long  LINUX_MIB_TCPABORTONMEMORY                                                    
+unsigned_long  LINUX_MIB_TCPABORTONTIMEOUT                                                   
+unsigned_long  LINUX_MIB_TCPABORTONLINGER                                                    
+unsigned_long  LINUX_MIB_TCPABORTFAILED                                                      
+unsigned_long  LINUX_MIB_TCPMEMORYPRESSURES                                                  
+unsigned_long  LINUX_MIB_TCPMEMORYPRESSURESCHRONO                                            
+unsigned_long  LINUX_MIB_TCPSACKDISCARD                                                      
+unsigned_long  LINUX_MIB_TCPDSACKIGNOREDOLD                                                  
+unsigned_long  LINUX_MIB_TCPDSACKIGNOREDNOUNDO                                               
+unsigned_long  LINUX_MIB_TCPSPURIOUSRTOS                                                     
+unsigned_long  LINUX_MIB_TCPMD5NOTFOUND                                                      
+unsigned_long  LINUX_MIB_TCPMD5UNEXPECTED                                                    
+unsigned_long  LINUX_MIB_TCPMD5FAILURE                                                       
+unsigned_long  LINUX_MIB_SACKSHIFTED                                                         
+unsigned_long  LINUX_MIB_SACKMERGED                                                          
+unsigned_long  LINUX_MIB_SACKSHIFTFALLBACK                                                   
+unsigned_long  LINUX_MIB_TCPBACKLOGDROP                                                      
+unsigned_long  LINUX_MIB_PFMEMALLOCDROP                                                      
+unsigned_long  LINUX_MIB_TCPMINTTLDROP                                                       
+unsigned_long  LINUX_MIB_TCPDEFERACCEPTDROP                                                  
+unsigned_long  LINUX_MIB_IPRPFILTER                                                          
+unsigned_long  LINUX_MIB_TCPTIMEWAITOVERFLOW                                                 
+unsigned_long  LINUX_MIB_TCPREQQFULLDOCOOKIES                                                
+unsigned_long  LINUX_MIB_TCPREQQFULLDROP                                                     
+unsigned_long  LINUX_MIB_TCPRETRANSFAIL                                                      
+unsigned_long  LINUX_MIB_TCPBACKLOGCOALESCE                                                  
+unsigned_long  LINUX_MIB_TCPOFOQUEUE                                                         
+unsigned_long  LINUX_MIB_TCPOFODROP                                                          
+unsigned_long  LINUX_MIB_TCPOFOMERGE                                                         
+unsigned_long  LINUX_MIB_TCPCHALLENGEACK                                                     
+unsigned_long  LINUX_MIB_TCPSYNCHALLENGE                                                     
+unsigned_long  LINUX_MIB_TCPFASTOPENACTIVE                                                   
+unsigned_long  LINUX_MIB_TCPFASTOPENACTIVEFAIL                                               
+unsigned_long  LINUX_MIB_TCPFASTOPENPASSIVE                                                  
+unsigned_long  LINUX_MIB_TCPFASTOPENPASSIVEFAIL                                              
+unsigned_long  LINUX_MIB_TCPFASTOPENLISTENOVERFLOW                                           
+unsigned_long  LINUX_MIB_TCPFASTOPENCOOKIEREQD                                               
+unsigned_long  LINUX_MIB_TCPFASTOPENBLACKHOLE                                                
+unsigned_long  LINUX_MIB_TCPSPURIOUS_RTX_HOSTQUEUES                                          
+unsigned_long  LINUX_MIB_BUSYPOLLRXPACKETS                                                   
+unsigned_long  LINUX_MIB_TCPSYNRETRANS                                                       
+unsigned_long  LINUX_MIB_TCPHYSTARTTRAINDETECT                                               
+unsigned_long  LINUX_MIB_TCPHYSTARTTRAINCWND                                                 
+unsigned_long  LINUX_MIB_TCPHYSTARTDELAYDETECT                                               
+unsigned_long  LINUX_MIB_TCPHYSTARTDELAYCWND                                                 
+unsigned_long  LINUX_MIB_TCPACKSKIPPEDSYNRECV                                                
+unsigned_long  LINUX_MIB_TCPACKSKIPPEDPAWS                                                   
+unsigned_long  LINUX_MIB_TCPACKSKIPPEDSEQ                                                    
+unsigned_long  LINUX_MIB_TCPACKSKIPPEDFINWAIT2                                               
+unsigned_long  LINUX_MIB_TCPACKSKIPPEDTIMEWAIT                                               
+unsigned_long  LINUX_MIB_TCPACKSKIPPEDCHALLENGE                                              
+unsigned_long  LINUX_MIB_TCPWINPROBE                                                         
+unsigned_long  LINUX_MIB_TCPMTUPFAIL                                                         
+unsigned_long  LINUX_MIB_TCPMTUPSUCCESS                                                      
+unsigned_long  LINUX_MIB_TCPDELIVEREDCE                                                      
+unsigned_long  LINUX_MIB_TCPACKCOMPRESSED                                                    
+unsigned_long  LINUX_MIB_TCPZEROWINDOWDROP                                                   
+unsigned_long  LINUX_MIB_TCPRCVQDROP                                                         
+unsigned_long  LINUX_MIB_TCPWQUEUETOOBIG                                                     
+unsigned_long  LINUX_MIB_TCPFASTOPENPASSIVEALTKEY                                            
+unsigned_long  LINUX_MIB_TCPTIMEOUTREHASH                                                    
+unsigned_long  LINUX_MIB_TCPDUPLICATEDATAREHASH                                              
+unsigned_long  LINUX_MIB_TCPDSACKRECVSEGS                                                    
+unsigned_long  LINUX_MIB_TCPDSACKIGNOREDDUBIOUS                                              
+unsigned_long  LINUX_MIB_TCPMIGRATEREQSUCCESS                                                
+unsigned_long  LINUX_MIB_TCPMIGRATEREQFAILURE                                                
+unsigned_long  __LINUX_MIB_MAX                                                               
diff --git linux-libre-6.7-gnu/Documentation/networking/net_cachelines/tcp_sock.rst linux-libre-6.8-gnu/Documentation/networking/net_cachelines/tcp_sock.rst
new file mode 100644
index 000000000000..1c154cbd1848
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/networking/net_cachelines/tcp_sock.rst
@@ -0,0 +1,157 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. Copyright (C) 2023 Google LLC
+
+=========================================
+tcp_sock struct fast path usage breakdown
+=========================================
+
+Type                          Name                    fastpath_tx_access  fastpath_rx_access  Comments
+..struct                      ..tcp_sock                                                        
+struct_inet_connection_sock   inet_conn                                                       
+u16                           tcp_header_len          read_mostly         read_mostly         tcp_bound_to_half_wnd,tcp_current_mss(tx);tcp_rcv_established(rx)
+u16                           gso_segs                read_mostly         -                   tcp_xmit_size_goal
+__be32                        pred_flags              read_write          read_mostly         tcp_select_window(tx);tcp_rcv_established(rx)
+u64                           bytes_received          -                   read_write          tcp_rcv_nxt_update(rx)
+u32                           segs_in                 -                   read_write          tcp_v6_rcv(rx)
+u32                           data_segs_in            -                   read_write          tcp_v6_rcv(rx)
+u32                           rcv_nxt                 read_mostly         read_write          tcp_cleanup_rbuf,tcp_send_ack,tcp_inq_hint,tcp_transmit_skb,tcp_receive_window(tx);tcp_v6_do_rcv,tcp_rcv_established,tcp_data_queue,tcp_receive_window,tcp_rcv_nxt_update(write)(rx)
+u32                           copied_seq              -                   read_mostly         tcp_cleanup_rbuf,tcp_rcv_space_adjust,tcp_inq_hint
+u32                           rcv_wup                 -                   read_write          __tcp_cleanup_rbuf,tcp_receive_window,tcp_receive_established
+u32                           snd_nxt                 read_write          read_mostly         tcp_rate_check_app_limited,__tcp_transmit_skb,tcp_event_new_data_sent(write)(tx);tcp_rcv_established,tcp_ack,tcp_clean_rtx_queue(rx)
+u32                           segs_out                read_write          -                   __tcp_transmit_skb
+u32                           data_segs_out           read_write          -                   __tcp_transmit_skb,tcp_update_skb_after_send
+u64                           bytes_sent              read_write          -                   __tcp_transmit_skb
+u64                           bytes_acked             -                   read_write          tcp_snd_una_update/tcp_ack
+u32                           dsack_dups                                                      
+u32                           snd_una                 read_mostly         read_write          tcp_wnd_end,tcp_urg_mode,tcp_minshall_check,tcp_cwnd_validate(tx);tcp_ack,tcp_may_update_window,tcp_clean_rtx_queue(write),tcp_ack_tstamp(rx)
+u32                           snd_sml                 read_write          -                   tcp_minshall_check,tcp_minshall_update
+u32                           rcv_tstamp              -                   read_mostly         tcp_ack
+u32                           lsndtime                read_write          -                   tcp_slow_start_after_idle_check,tcp_event_data_sent
+u32                           last_oow_ack_time                                               
+u32                           compressed_ack_rcv_nxt                                          
+u32                           tsoffset                read_mostly         read_mostly         tcp_established_options(tx);tcp_fast_parse_options(rx)
+struct_list_head              tsq_node                -                   -                   
+struct_list_head              tsorted_sent_queue      read_write          -                   tcp_update_skb_after_send
+u32                           snd_wl1                 -                   read_mostly         tcp_may_update_window
+u32                           snd_wnd                 read_mostly         read_mostly         tcp_wnd_end,tcp_tso_should_defer(tx);tcp_fast_path_on(rx)
+u32                           max_window              read_mostly         -                   tcp_bound_to_half_wnd,forced_push
+u32                           mss_cache               read_mostly         read_mostly         tcp_rate_check_app_limited,tcp_current_mss,tcp_sync_mss,tcp_sndbuf_expand,tcp_tso_should_defer(tx);tcp_update_pacing_rate,tcp_clean_rtx_queue(rx)
+u32                           window_clamp            read_mostly         read_write          tcp_rcv_space_adjust,__tcp_select_window
+u32                           rcv_ssthresh            read_mostly         -                   __tcp_select_window
+u8                            scaling_ratio           read_mostly         read_mostly         tcp_win_from_space
+struct                        tcp_rack                                                        
+u16                           advmss                  -                   read_mostly         tcp_rcv_space_adjust
+u8                            compressed_ack                                                  
+u8:2                          dup_ack_counter                                                 
+u8:1                          tlp_retrans                                                     
+u8:1                          tcp_usec_ts             read_mostly         read_mostly
+u32                           chrono_start            read_write          -                   tcp_chrono_start/stop(tcp_write_xmit,tcp_cwnd_validate,tcp_send_syn_data)
+u32[3]                        chrono_stat             read_write          -                   tcp_chrono_start/stop(tcp_write_xmit,tcp_cwnd_validate,tcp_send_syn_data)
+u8:2                          chrono_type             read_write          -                   tcp_chrono_start/stop(tcp_write_xmit,tcp_cwnd_validate,tcp_send_syn_data)
+u8:1                          rate_app_limited        -                   read_write          tcp_rate_gen
+u8:1                          fastopen_connect                                                
+u8:1                          fastopen_no_cookie                                              
+u8:1                          is_sack_reneg           -                   read_mostly         tcp_skb_entail,tcp_ack
+u8:2                          fastopen_client_fail                                            
+u8:4                          nonagle                 read_write          -                   tcp_skb_entail,tcp_push_pending_frames
+u8:1                          thin_lto                                                        
+u8:1                          recvmsg_inq                                                     
+u8:1                          repair                  read_mostly         -                   tcp_write_xmit
+u8:1                          frto                                                            
+u8                            repair_queue            -                   -                   
+u8:2                          save_syn                                                        
+u8:1                          syn_data                                                        
+u8:1                          syn_fastopen                                                    
+u8:1                          syn_fastopen_exp                                                
+u8:1                          syn_fastopen_ch                                                 
+u8:1                          syn_data_acked                                                  
+u8:1                          is_cwnd_limited         read_mostly         -                   tcp_cwnd_validate,tcp_is_cwnd_limited
+u32                           tlp_high_seq            -                   read_mostly         tcp_ack
+u32                           tcp_tx_delay                                                    
+u64                           tcp_wstamp_ns           read_write          -                   tcp_pacing_check,tcp_tso_should_defer,tcp_update_skb_after_send
+u64                           tcp_clock_cache         read_write          read_write          tcp_mstamp_refresh(tcp_write_xmit/tcp_rcv_space_adjust),__tcp_transmit_skb,tcp_tso_should_defer;timer
+u64                           tcp_mstamp              read_write          read_write          tcp_mstamp_refresh(tcp_write_xmit/tcp_rcv_space_adjust)(tx);tcp_rcv_space_adjust,tcp_rate_gen,tcp_clean_rtx_queue,tcp_ack_update_rtt/tcp_time_stamp(rx);timer
+u32                           srtt_us                 read_mostly         read_write          tcp_tso_should_defer(tx);tcp_update_pacing_rate,__tcp_set_rto,tcp_rtt_estimator(rx)
+u32                           mdev_us                 read_write          -                   tcp_rtt_estimator
+u32                           mdev_max_us                                                     
+u32                           rttvar_us               -                   read_mostly         __tcp_set_rto
+u32                           rtt_seq                 read_write                              tcp_rtt_estimator
+struct_minmax                 rtt_min                 -                   read_mostly         tcp_min_rtt/tcp_rate_gen,tcp_min_rtttcp_update_rtt_min
+u32                           packets_out             read_write          read_write          tcp_packets_in_flight(tx/rx);tcp_slow_start_after_idle_check,tcp_nagle_check,tcp_rate_skb_sent,tcp_event_new_data_sent,tcp_cwnd_validate,tcp_write_xmit(tx);tcp_ack,tcp_clean_rtx_queue,tcp_update_pacing_rate(rx)
+u32                           retrans_out             -                   read_mostly         tcp_packets_in_flight,tcp_rate_check_app_limited
+u32                           max_packets_out         -                   read_write          tcp_cwnd_validate
+u32                           cwnd_usage_seq          -                   read_write          tcp_cwnd_validate
+u16                           urg_data                -                   read_mostly         tcp_fast_path_check
+u8                            ecn_flags               read_write          -                   tcp_ecn_send
+u8                            keepalive_probes                                                
+u32                           reordering              read_mostly         -                   tcp_sndbuf_expand
+u32                           reord_seen                                                      
+u32                           snd_up                  read_write          read_mostly         tcp_mark_urg,tcp_urg_mode,__tcp_transmit_skb(tx);tcp_clean_rtx_queue(rx)
+struct_tcp_options_received   rx_opt                  read_mostly         read_write          tcp_established_options(tx);tcp_fast_path_on,tcp_ack_update_window,tcp_is_sack,tcp_data_queue,tcp_rcv_established,tcp_ack_update_rtt(rx)
+u32                           snd_ssthresh            -                   read_mostly         tcp_update_pacing_rate
+u32                           snd_cwnd                read_mostly         read_mostly         tcp_snd_cwnd,tcp_rate_check_app_limited,tcp_tso_should_defer(tx);tcp_update_pacing_rate
+u32                           snd_cwnd_cnt                                                    
+u32                           snd_cwnd_clamp                                                  
+u32                           snd_cwnd_used                                                   
+u32                           snd_cwnd_stamp                                                  
+u32                           prior_cwnd                                                      
+u32                           prr_delivered                                                   
+u32                           prr_out                 read_mostly         read_mostly         tcp_rate_skb_sent,tcp_newly_delivered(tx);tcp_ack,tcp_rate_gen,tcp_clean_rtx_queue(rx)
+u32                           delivered               read_mostly         read_write          tcp_rate_skb_sent, tcp_newly_delivered(tx);tcp_ack, tcp_rate_gen, tcp_clean_rtx_queue (rx)
+u32                           delivered_ce            read_mostly         read_write          tcp_rate_skb_sent(tx);tcp_rate_gen(rx)
+u32                           lost                    -                   read_mostly         tcp_ack
+u32                           app_limited             read_write          read_mostly         tcp_rate_check_app_limited,tcp_rate_skb_sent(tx);tcp_rate_gen(rx)
+u64                           first_tx_mstamp         read_write          -                   tcp_rate_skb_sent
+u64                           delivered_mstamp        read_write          -                   tcp_rate_skb_sent
+u32                           rate_delivered          -                   read_mostly         tcp_rate_gen
+u32                           rate_interval_us        -                   read_mostly         rate_delivered,rate_app_limited
+u32                           rcv_wnd                 read_write          read_mostly         tcp_select_window,tcp_receive_window,tcp_fast_path_check
+u32                           write_seq               read_write          -                   tcp_rate_check_app_limited,tcp_write_queue_empty,tcp_skb_entail,forced_push,tcp_mark_push
+u32                           notsent_lowat           read_mostly         -                   tcp_stream_memory_free
+u32                           pushed_seq              read_write          -                   tcp_mark_push,forced_push
+u32                           lost_out                read_mostly         read_mostly         tcp_left_out(tx);tcp_packets_in_flight(tx/rx);tcp_rate_check_app_limited(rx)
+u32                           sacked_out              read_mostly         read_mostly         tcp_left_out(tx);tcp_packets_in_flight(tx/rx);tcp_clean_rtx_queue(rx)
+struct_hrtimer                pacing_timer                                                    
+struct_hrtimer                compressed_ack_timer                                            
+struct_sk_buff*               lost_skb_hint           read_mostly                             tcp_clean_rtx_queue
+struct_sk_buff*               retransmit_skb_hint     read_mostly         -                   tcp_clean_rtx_queue
+struct_rb_root                out_of_order_queue      -                   read_mostly         tcp_data_queue,tcp_fast_path_check
+struct_sk_buff*               ooo_last_skb                                                    
+struct_tcp_sack_block[1]      duplicate_sack                                                  
+struct_tcp_sack_block[4]      selective_acks                                                  
+struct_tcp_sack_block[4]      recv_sack_cache                                                 
+struct_sk_buff*               highest_sack            read_write          -                   tcp_event_new_data_sent
+int                           lost_cnt_hint                                                   
+u32                           prior_ssthresh                                                  
+u32                           high_seq                                                        
+u32                           retrans_stamp                                                   
+u32                           undo_marker                                                     
+int                           undo_retrans                                                    
+u64                           bytes_retrans                                                   
+u32                           total_retrans                                                   
+u32                           rto_stamp                                                       
+u16                           total_rto                                                       
+u16                           total_rto_recoveries                                            
+u32                           total_rto_time                                                  
+u32                           urg_seq                 -                   -                   
+unsigned_int                  keepalive_time                                                  
+unsigned_int                  keepalive_intvl                                                 
+int                           linger2                                                         
+u8                            bpf_sock_ops_cb_flags                                           
+u8:1                          bpf_chg_cc_inprogress                                           
+u16                           timeout_rehash                                                  
+u32                           rcv_ooopack                                                     
+u32                           rcv_rtt_last_tsecr                                              
+struct                        rcv_rtt_est             -                   read_write          tcp_rcv_space_adjust,tcp_rcv_established
+struct                        rcvq_space              -                   read_write          tcp_rcv_space_adjust
+struct                        mtu_probe                                                       
+u32                           plb_rehash                                                      
+u32                           mtu_info                                                        
+bool                          is_mptcp                                                        
+bool                          smc_hs_congested                                                
+bool                          syn_smc                                                         
+struct_tcp_sock_af_ops*       af_specific                                                     
+struct_tcp_md5sig_info*       md5sig_info                                                     
+struct_tcp_fastopen_request*  fastopen_req                                                    
+struct_request_sock*          fastopen_rsk                                                    
+struct_saved_syn*             saved_syn                                                        
\ No newline at end of file
diff --git linux-libre-6.7-gnu/Documentation/networking/netlink_spec/.gitignore linux-libre-6.8-gnu/Documentation/networking/netlink_spec/.gitignore
new file mode 100644
index 000000000000..30d85567b592
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/networking/netlink_spec/.gitignore
@@ -0,0 +1 @@
+*.rst
diff --git linux-libre-6.7-gnu/Documentation/networking/netlink_spec/readme.txt linux-libre-6.8-gnu/Documentation/networking/netlink_spec/readme.txt
new file mode 100644
index 000000000000..6763f99d216c
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/networking/netlink_spec/readme.txt
@@ -0,0 +1,4 @@
+SPDX-License-Identifier: GPL-2.0
+
+This file is populated during the build of the documentation (htmldocs) by the
+tools/net/ynl/ynl-gen-rst.py script.
diff --git linux-libre-6.7-gnu/Documentation/networking/packet_mmap.rst linux-libre-6.8-gnu/Documentation/networking/packet_mmap.rst
index 30a3be3c48f3..dca15d15feaf 100644
--- linux-libre-6.7-gnu/Documentation/networking/packet_mmap.rst
+++ linux-libre-6.8-gnu/Documentation/networking/packet_mmap.rst
@@ -263,20 +263,20 @@ the name indicates, this function allocates pages of memory, and the second
 argument is "order" or a power of two number of pages, that is
 (for PAGE_SIZE == 4096) order=0 ==> 4096 bytes, order=1 ==> 8192 bytes,
 order=2 ==> 16384 bytes, etc. The maximum size of a
-region allocated by __get_free_pages is determined by the MAX_ORDER macro. More
-precisely the limit can be calculated as::
+region allocated by __get_free_pages is determined by the MAX_PAGE_ORDER macro.
+More precisely the limit can be calculated as::
 
-   PAGE_SIZE << MAX_ORDER
+   PAGE_SIZE << MAX_PAGE_ORDER
 
    In a i386 architecture PAGE_SIZE is 4096 bytes
-   In a 2.4/i386 kernel MAX_ORDER is 10
-   In a 2.6/i386 kernel MAX_ORDER is 11
+   In a 2.4/i386 kernel MAX_PAGE_ORDER is 10
+   In a 2.6/i386 kernel MAX_PAGE_ORDER is 11
 
 So get_free_pages can allocate as much as 4MB or 8MB in a 2.4/2.6 kernel
 respectively, with an i386 architecture.
 
 User space programs can include /usr/include/sys/user.h and
-/usr/include/linux/mmzone.h to get PAGE_SIZE MAX_ORDER declarations.
+/usr/include/linux/mmzone.h to get PAGE_SIZE MAX_PAGE_ORDER declarations.
 
 The pagesize can also be determined dynamically with the getpagesize (2)
 system call.
@@ -324,7 +324,7 @@ Definitions:
 		(see /proc/slabinfo)
 <pointer size>  depends on the architecture -- ``sizeof(void *)``
 <page size>     depends on the architecture -- PAGE_SIZE or getpagesize (2)
-<max-order>     is the value defined with MAX_ORDER
+<max-order>     is the value defined with MAX_PAGE_ORDER
 <frame size>    it's an upper bound of frame's capture size (more on this later)
 ==============  ================================================================
 
diff --git linux-libre-6.7-gnu/Documentation/networking/page_pool.rst linux-libre-6.8-gnu/Documentation/networking/page_pool.rst
index 60993cb56b32..9d958128a57c 100644
--- linux-libre-6.7-gnu/Documentation/networking/page_pool.rst
+++ linux-libre-6.8-gnu/Documentation/networking/page_pool.rst
@@ -41,6 +41,11 @@ Architecture overview
                           |   Fast cache    |     |  ptr-ring cache  |
                           +-----------------+     +------------------+
 
+Monitoring
+==========
+Information about page pools on the system can be accessed via the netdev
+genetlink family (see Documentation/netlink/specs/netdev.yaml).
+
 API interface
 =============
 The number of pools created **must** match the number of hardware queues
@@ -107,8 +112,9 @@ page_pool_get_stats() and structures described below are available.
 It takes a  pointer to a ``struct page_pool`` and a pointer to a struct
 page_pool_stats allocated by the caller.
 
-The API will fill in the provided struct page_pool_stats with
-statistics about the page_pool.
+Older drivers expose page pool statistics via ethtool or debugfs.
+The same statistics are accessible via the netlink netdev family
+in a driver-independent fashion.
 
 .. kernel-doc:: include/net/page_pool/types.h
    :identifiers: struct page_pool_recycle_stats
diff --git linux-libre-6.7-gnu/Documentation/networking/scaling.rst linux-libre-6.8-gnu/Documentation/networking/scaling.rst
index 03ae19a689fc..4eb50bcb9d42 100644
--- linux-libre-6.7-gnu/Documentation/networking/scaling.rst
+++ linux-libre-6.8-gnu/Documentation/networking/scaling.rst
@@ -44,6 +44,21 @@ by masking out the low order seven bits of the computed hash for the
 packet (usually a Toeplitz hash), taking this number as a key into the
 indirection table and reading the corresponding value.
 
+Some NICs support symmetric RSS hashing where, if the IP (source address,
+destination address) and TCP/UDP (source port, destination port) tuples
+are swapped, the computed hash is the same. This is beneficial in some
+applications that monitor TCP/IP flows (IDS, firewalls, ...etc) and need
+both directions of the flow to land on the same Rx queue (and CPU). The
+"Symmetric-XOR" is a type of RSS algorithms that achieves this hash
+symmetry by XORing the input source and destination fields of the IP
+and/or L4 protocols. This, however, results in reduced input entropy and
+could potentially be exploited. Specifically, the algorithm XORs the input
+as follows::
+
+    # (SRC_IP ^ DST_IP, SRC_IP ^ DST_IP, SRC_PORT ^ DST_PORT, SRC_PORT ^ DST_PORT)
+
+The result is then fed to the underlying RSS algorithm.
+
 Some advanced NICs allow steering packets to queues based on
 programmable filters. For example, webserver bound TCP port 80 packets
 can be directed to their own receive queue. Such “n-tuple” filters can
diff --git linux-libre-6.7-gnu/Documentation/networking/smc-sysctl.rst linux-libre-6.8-gnu/Documentation/networking/smc-sysctl.rst
index 769149d98773..a874d007f2db 100644
--- linux-libre-6.7-gnu/Documentation/networking/smc-sysctl.rst
+++ linux-libre-6.8-gnu/Documentation/networking/smc-sysctl.rst
@@ -57,3 +57,17 @@ rmem - INTEGER
 	only allowed 512KiB for SMC-R and 1MiB for SMC-D.
 
 	Default: 64KiB
+
+smcr_max_links_per_lgr - INTEGER
+	Controls the max number of links can be added to a SMC-R link group. Notice that
+	the actual number of the links added to a SMC-R link group depends on the number
+	of RDMA devices exist in the system. The acceptable value ranges from 1 to 2. Only
+	for SMC-R v2.1 and later.
+
+	Default: 2
+
+smcr_max_conns_per_lgr - INTEGER
+	Controls the max number of connections can be added to a SMC-R link group. The
+	acceptable value ranges from 16 to 255. Only for SMC-R v2.1 and later.
+
+	Default: 255
diff --git linux-libre-6.7-gnu/Documentation/networking/snmp_counter.rst linux-libre-6.8-gnu/Documentation/networking/snmp_counter.rst
index 213637474478..ff1e6a8ffe21 100644
--- linux-libre-6.7-gnu/Documentation/networking/snmp_counter.rst
+++ linux-libre-6.8-gnu/Documentation/networking/snmp_counter.rst
@@ -313,7 +313,7 @@ https://lwn.net/Articles/576263/
 
 * TcpExtTCPOrigDataSent
 
-This counter is explained by `kernel commit f19c29e3e391`_, I pasted the
+This counter is explained by kernel commit f19c29e3e391, I pasted the
 explanation below::
 
   TCPOrigDataSent: number of outgoing packets with original data (excluding
@@ -323,7 +323,7 @@ explanation below::
 
 * TCPSynRetrans
 
-This counter is explained by `kernel commit f19c29e3e391`_, I pasted the
+This counter is explained by kernel commit f19c29e3e391, I pasted the
 explanation below::
 
   TCPSynRetrans: number of SYN and SYN/ACK retransmits to break down
@@ -331,14 +331,12 @@ explanation below::
 
 * TCPFastOpenActiveFail
 
-This counter is explained by `kernel commit f19c29e3e391`_, I pasted the
+This counter is explained by kernel commit f19c29e3e391, I pasted the
 explanation below::
 
   TCPFastOpenActiveFail: Fast Open attempts (SYN/data) failed because
   the remote does not accept it or the attempts timed out.
 
-.. _kernel commit f19c29e3e391: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f19c29e3e391a66a273e9afebaf01917245148cd
-
 * TcpExtListenOverflows and TcpExtListenDrops
 
 When kernel receives a SYN from a client, and if the TCP accept queue
@@ -698,11 +696,9 @@ number of the SACK block. For more details, please refer the comment
 of the function tcp_is_sackblock_valid in the kernel source code. A
 SACK option could have up to 4 blocks, they are checked
 individually. E.g., if 3 blocks of a SACk is invalid, the
-corresponding counter would be updated 3 times. The comment of the
-`Add counters for discarded SACK blocks`_ patch has additional
-explanation:
-
-.. _Add counters for discarded SACK blocks: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=18f02545a9a16c9a89778b91a162ad16d510bb32
+corresponding counter would be updated 3 times. The comment of commit
+18f02545a9a1 ("[TCP] MIB: Add counters for discarded SACK blocks")
+has additional explanation:
 
 * TcpExtTCPSACKDiscard
 
diff --git linux-libre-6.7-gnu/Documentation/networking/timestamping.rst linux-libre-6.8-gnu/Documentation/networking/timestamping.rst
index f17c01834a12..5e93cd71f99f 100644
--- linux-libre-6.7-gnu/Documentation/networking/timestamping.rst
+++ linux-libre-6.8-gnu/Documentation/networking/timestamping.rst
@@ -357,7 +357,8 @@ enabling SOF_TIMESTAMPING_OPT_ID and comparing the byte offset at
 send time with the value returned for each timestamp. It can prevent
 the situation by always flushing the TCP stack in between requests,
 for instance by enabling TCP_NODELAY and disabling TCP_CORK and
-autocork.
+autocork. After linux-4.7, a better way to prevent coalescing is
+to use MSG_EOR flag at sendmsg() time.
 
 These precautions ensure that the timestamp is generated only when all
 bytes have passed a timestamp point, assuming that the network stack
diff --git linux-libre-6.7-gnu/Documentation/networking/xdp-rx-metadata.rst linux-libre-6.8-gnu/Documentation/networking/xdp-rx-metadata.rst
index 205696780b78..a6e0ece18be5 100644
--- linux-libre-6.7-gnu/Documentation/networking/xdp-rx-metadata.rst
+++ linux-libre-6.8-gnu/Documentation/networking/xdp-rx-metadata.rst
@@ -1,3 +1,5 @@
+.. SPDX-License-Identifier: GPL-2.0
+
 ===============
 XDP RX Metadata
 ===============
@@ -18,7 +20,13 @@ Currently, the following kfuncs are supported. In the future, as more
 metadata is supported, this set will grow:
 
 .. kernel-doc:: net/core/xdp.c
-   :identifiers: bpf_xdp_metadata_rx_timestamp bpf_xdp_metadata_rx_hash
+   :identifiers: bpf_xdp_metadata_rx_timestamp
+
+.. kernel-doc:: net/core/xdp.c
+   :identifiers: bpf_xdp_metadata_rx_hash
+
+.. kernel-doc:: net/core/xdp.c
+   :identifiers: bpf_xdp_metadata_rx_vlan_tag
 
 An XDP program can use these kfuncs to read the metadata into stack
 variables for its own consumption. Or, to pass the metadata on to other
diff --git linux-libre-6.7-gnu/Documentation/networking/xsk-tx-metadata.rst linux-libre-6.8-gnu/Documentation/networking/xsk-tx-metadata.rst
new file mode 100644
index 000000000000..bd033fe95cca
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/networking/xsk-tx-metadata.rst
@@ -0,0 +1,81 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================
+AF_XDP TX Metadata
+==================
+
+This document describes how to enable offloads when transmitting packets
+via :doc:`af_xdp`. Refer to :doc:`xdp-rx-metadata` on how to access similar
+metadata on the receive side.
+
+General Design
+==============
+
+The headroom for the metadata is reserved via ``tx_metadata_len`` in
+``struct xdp_umem_reg``. The metadata length is therefore the same for
+every socket that shares the same umem. The metadata layout is a fixed UAPI,
+refer to ``union xsk_tx_metadata`` in ``include/uapi/linux/if_xdp.h``.
+Thus, generally, the ``tx_metadata_len`` field above should contain
+``sizeof(union xsk_tx_metadata)``.
+
+The headroom and the metadata itself should be located right before
+``xdp_desc->addr`` in the umem frame. Within a frame, the metadata
+layout is as follows::
+
+           tx_metadata_len
+     /                         \
+    +-----------------+---------+----------------------------+
+    | xsk_tx_metadata | padding |          payload           |
+    +-----------------+---------+----------------------------+
+                                ^
+                                |
+                          xdp_desc->addr
+
+An AF_XDP application can request headrooms larger than ``sizeof(struct
+xsk_tx_metadata)``. The kernel will ignore the padding (and will still
+use ``xdp_desc->addr - tx_metadata_len`` to locate
+the ``xsk_tx_metadata``). For the frames that shouldn't carry
+any metadata (i.e., the ones that don't have ``XDP_TX_METADATA`` option),
+the metadata area is ignored by the kernel as well.
+
+The flags field enables the particular offload:
+
+- ``XDP_TXMD_FLAGS_TIMESTAMP``: requests the device to put transmission
+  timestamp into ``tx_timestamp`` field of ``union xsk_tx_metadata``.
+- ``XDP_TXMD_FLAGS_CHECKSUM``: requests the device to calculate L4
+  checksum. ``csum_start`` specifies byte offset of where the checksumming
+  should start and ``csum_offset`` specifies byte offset where the
+  device should store the computed checksum.
+
+Besides the flags above, in order to trigger the offloads, the first
+packet's ``struct xdp_desc`` descriptor should set ``XDP_TX_METADATA``
+bit in the ``options`` field. Also note that in a multi-buffer packet
+only the first chunk should carry the metadata.
+
+Software TX Checksum
+====================
+
+For development and testing purposes its possible to pass
+``XDP_UMEM_TX_SW_CSUM`` flag to ``XDP_UMEM_REG`` UMEM registration call.
+In this case, when running in ``XDK_COPY`` mode, the TX checksum
+is calculated on the CPU. Do not enable this option in production because
+it will negatively affect performance.
+
+Querying Device Capabilities
+============================
+
+Every devices exports its offloads capabilities via netlink netdev family.
+Refer to ``xsk-flags`` features bitmask in
+``Documentation/netlink/specs/netdev.yaml``.
+
+- ``tx-timestamp``: device supports ``XDP_TXMD_FLAGS_TIMESTAMP``
+- ``tx-checksum``: device supports ``XDP_TXMD_FLAGS_CHECKSUM``
+
+See ``tools/net/ynl/samples/netdev.c`` on how to query this information.
+
+Example
+=======
+
+See ``tools/testing/selftests/bpf/xdp_hw_metadata.c`` for an example
+program that handles TX metadata. Also see https://github.com/fomichev/xskgen
+for a more bare-bones example.
diff --git linux-libre-6.7-gnu/Documentation/power/freezing-of-tasks.rst linux-libre-6.8-gnu/Documentation/power/freezing-of-tasks.rst
index 53b6a56c4635..df9755bfbd94 100644
--- linux-libre-6.7-gnu/Documentation/power/freezing-of-tasks.rst
+++ linux-libre-6.8-gnu/Documentation/power/freezing-of-tasks.rst
@@ -14,27 +14,28 @@ architectures).
 II. How does it work?
 =====================
 
-There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN
-and PF_FREEZER_SKIP (the last one is auxiliary).  The tasks that have
-PF_NOFREEZE unset (all user space processes and some kernel threads) are
-regarded as 'freezable' and treated in a special way before the system enters a
-suspend state as well as before a hibernation image is created (in what follows
-we only consider hibernation, but the description also applies to suspend).
+There is one per-task flag (PF_NOFREEZE) and three per-task states
+(TASK_FROZEN, TASK_FREEZABLE and __TASK_FREEZABLE_UNSAFE) used for that.
+The tasks that have PF_NOFREEZE unset (all user space tasks and some kernel
+threads) are regarded as 'freezable' and treated in a special way before the
+system enters a sleep state as well as before a hibernation image is created
+(hibernation is directly covered by what follows, but the description applies
+to system-wide suspend too).
 
 Namely, as the first step of the hibernation procedure the function
 freeze_processes() (defined in kernel/power/process.c) is called.  A system-wide
-variable system_freezing_cnt (as opposed to a per-task flag) is used to indicate
-whether the system is to undergo a freezing operation. And freeze_processes()
-sets this variable.  After this, it executes try_to_freeze_tasks() that sends a
-fake signal to all user space processes, and wakes up all the kernel threads.
-All freezable tasks must react to that by calling try_to_freeze(), which
-results in a call to __refrigerator() (defined in kernel/freezer.c), which sets
-the task's PF_FROZEN flag, changes its state to TASK_UNINTERRUPTIBLE and makes
-it loop until PF_FROZEN is cleared for it. Then, we say that the task is
-'frozen' and therefore the set of functions handling this mechanism is referred
-to as 'the freezer' (these functions are defined in kernel/power/process.c,
-kernel/freezer.c & include/linux/freezer.h). User space processes are generally
-frozen before kernel threads.
+static key freezer_active (as opposed to a per-task flag or state) is used to
+indicate whether the system is to undergo a freezing operation. And
+freeze_processes() sets this static key.  After this, it executes
+try_to_freeze_tasks() that sends a fake signal to all user space processes, and
+wakes up all the kernel threads. All freezable tasks must react to that by
+calling try_to_freeze(), which results in a call to __refrigerator() (defined
+in kernel/freezer.c), which changes the task's state to TASK_FROZEN, and makes
+it loop until it is woken by an explicit TASK_FROZEN wakeup. Then, that task
+is regarded as 'frozen' and so the set of functions handling this mechanism is
+referred to as 'the freezer' (these functions are defined in
+kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h). User space
+tasks are generally frozen before kernel threads.
 
 __refrigerator() must not be called directly.  Instead, use the
 try_to_freeze() function (defined in include/linux/freezer.h), that checks
@@ -43,31 +44,40 @@ if the task is to be frozen and makes the task enter __refrigerator().
 For user space processes try_to_freeze() is called automatically from the
 signal-handling code, but the freezable kernel threads need to call it
 explicitly in suitable places or use the wait_event_freezable() or
-wait_event_freezable_timeout() macros (defined in include/linux/freezer.h)
-that combine interruptible sleep with checking if the task is to be frozen and
-calling try_to_freeze().  The main loop of a freezable kernel thread may look
+wait_event_freezable_timeout() macros (defined in include/linux/wait.h)
+that put the task to sleep (TASK_INTERRUPTIBLE) or freeze it (TASK_FROZEN) if
+freezer_active is set. The main loop of a freezable kernel thread may look
 like the following one::
 
 	set_freezable();
-	do {
-		hub_events();
-		wait_event_freezable(khubd_wait,
-				!list_empty(&hub_event_list) ||
-				kthread_should_stop());
-	} while (!kthread_should_stop() || !list_empty(&hub_event_list));
-
-(from drivers/usb/core/hub.c::hub_thread()).
-
-If a freezable kernel thread fails to call try_to_freeze() after the freezer has
-initiated a freezing operation, the freezing of tasks will fail and the entire
-hibernation operation will be cancelled.  For this reason, freezable kernel
-threads must call try_to_freeze() somewhere or use one of the
+
+	while (true) {
+		struct task_struct *tsk = NULL;
+
+		wait_event_freezable(oom_reaper_wait, oom_reaper_list != NULL);
+		spin_lock_irq(&oom_reaper_lock);
+		if (oom_reaper_list != NULL) {
+			tsk = oom_reaper_list;
+			oom_reaper_list = tsk->oom_reaper_list;
+		}
+		spin_unlock_irq(&oom_reaper_lock);
+
+		if (tsk)
+			oom_reap_task(tsk);
+	}
+
+(from mm/oom_kill.c::oom_reaper()).
+
+If a freezable kernel thread is not put to the frozen state after the freezer
+has initiated a freezing operation, the freezing of tasks will fail and the
+entire system-wide transition will be cancelled.  For this reason, freezable
+kernel threads must call try_to_freeze() somewhere or use one of the
 wait_event_freezable() and wait_event_freezable_timeout() macros.
 
 After the system memory state has been restored from a hibernation image and
 devices have been reinitialized, the function thaw_processes() is called in
-order to clear the PF_FROZEN flag for each frozen task.  Then, the tasks that
-have been frozen leave __refrigerator() and continue running.
+order to wake up each frozen task.  Then, the tasks that have been frozen leave
+__refrigerator() and continue running.
 
 
 Rationale behind the functions dealing with freezing and thawing of tasks
@@ -96,7 +106,8 @@ III. Which kernel threads are freezable?
 Kernel threads are not freezable by default.  However, a kernel thread may clear
 PF_NOFREEZE for itself by calling set_freezable() (the resetting of PF_NOFREEZE
 directly is not allowed).  From this point it is regarded as freezable
-and must call try_to_freeze() in a suitable place.
+and must call try_to_freeze() or variants of wait_event_freezable() in a
+suitable place.
 
 IV. Why do we do that?
 ======================
diff --git linux-libre-6.7-gnu/Documentation/process/4.Coding.rst linux-libre-6.8-gnu/Documentation/process/4.Coding.rst
index 1f0d81f44e14..c2046dec0c2f 100644
--- linux-libre-6.7-gnu/Documentation/process/4.Coding.rst
+++ linux-libre-6.8-gnu/Documentation/process/4.Coding.rst
@@ -66,6 +66,10 @@ for aligning variables/macros, for reflowing text and other similar tasks.
 See the file :ref:`Documentation/process/clang-format.rst <clangformat>`
 for more details.
 
+Some basic editor settings, such as indentation and line endings, will be
+set automatically if you are using an editor that is compatible with
+EditorConfig. See the official EditorConfig website for more information:
+https://editorconfig.org/
 
 Abstraction layers
 ******************
diff --git linux-libre-6.7-gnu/Documentation/process/changes.rst linux-libre-6.8-gnu/Documentation/process/changes.rst
index bb96ca0f774b..50b3d1cb1115 100644
--- linux-libre-6.7-gnu/Documentation/process/changes.rst
+++ linux-libre-6.8-gnu/Documentation/process/changes.rst
@@ -31,7 +31,7 @@ you probably needn't concern yourself with pcmciautils.
 ====================== ===============  ========================================
 GNU C                  5.1              gcc --version
 Clang/LLVM (optional)  11.0.0           clang --version
-Rust (optional)        1.73.0           rustc --version
+Rust (optional)        1.74.1           rustc --version
 bindgen (optional)     0.65.1           bindgen --version
 GNU make               3.82             make --version
 bash                   4.2              bash --version
@@ -39,7 +39,7 @@ binutils               2.25             ld -v
 flex                   2.5.35           flex --version
 bison                  2.0              bison --version
 pahole                 1.16             pahole --version
-util-linux             2.10o            fdformat --version
+util-linux             2.10o            mount --version
 kmod                   13               depmod -V
 e2fsprogs              1.41.4           e2fsck -V
 jfsutils               1.1.3            fsck.jfs -V
@@ -58,7 +58,7 @@ mcelog                 0.6              mcelog --version
 iptables               1.4.2            iptables -V
 openssl & libcrypto    1.0.0            openssl version
 bc                     1.06.95          bc --version
-Sphinx\ [#f1]_         1.7              sphinx-build --version
+Sphinx\ [#f1]_         2.4.4            sphinx-build --version
 cpio                   any              cpio --version
 GNU tar                1.28             tar --version
 gtags (optional)       6.6.5            gtags --version
@@ -213,7 +213,7 @@ Util-linux
 
 New versions of util-linux provide ``fdisk`` support for larger disks,
 support new options to mount, recognize more supported partition
-types, have a fdformat which works with 2.4 kernels, and similar goodies.
+types, and similar goodies.
 You'll probably want to upgrade.
 
 Ksymoops
diff --git linux-libre-6.7-gnu/Documentation/process/coding-style.rst linux-libre-6.8-gnu/Documentation/process/coding-style.rst
index 6db37a46d305..c48382c6b477 100644
--- linux-libre-6.7-gnu/Documentation/process/coding-style.rst
+++ linux-libre-6.8-gnu/Documentation/process/coding-style.rst
@@ -735,6 +735,10 @@ for aligning variables/macros, for reflowing text and other similar tasks.
 See the file :ref:`Documentation/process/clang-format.rst <clangformat>`
 for more details.
 
+Some basic editor settings, such as indentation and line endings, will be
+set automatically if you are using an editor that is compatible with
+EditorConfig. See the official EditorConfig website for more information:
+https://editorconfig.org/
 
 10) Kconfig configuration files
 -------------------------------
diff --git linux-libre-6.7-gnu/Documentation/process/cve.rst linux-libre-6.8-gnu/Documentation/process/cve.rst
new file mode 100644
index 000000000000..5e2753eff729
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/process/cve.rst
@@ -0,0 +1,121 @@
+====
+CVEs
+====
+
+Common Vulnerabilities and Exposure (CVE®) numbers were developed as an
+unambiguous way to identify, define, and catalog publicly disclosed
+security vulnerabilities.  Over time, their usefulness has declined with
+regards to the kernel project, and CVE numbers were very often assigned
+in inappropriate ways and for inappropriate reasons.  Because of this,
+the kernel development community has tended to avoid them.  However, the
+combination of continuing pressure to assign CVEs and other forms of
+security identifiers, and ongoing abuses by individuals and companies
+outside of the kernel community has made it clear that the kernel
+community should have control over those assignments.
+
+The Linux kernel developer team does have the ability to assign CVEs for
+potential Linux kernel security issues.  This assignment is independent
+of the :doc:`normal Linux kernel security bug reporting
+process<../process/security-bugs>`.
+
+A list of all assigned CVEs for the Linux kernel can be found in the
+archives of the linux-cve mailing list, as seen on
+https://lore.kernel.org/linux-cve-announce/.  To get notice of the
+assigned CVEs, please `subscribe
+<https://subspace.kernel.org/subscribing.html>`_ to that mailing list.
+
+Process
+=======
+
+As part of the normal stable release process, kernel changes that are
+potentially security issues are identified by the developers responsible
+for CVE number assignments and have CVE numbers automatically assigned
+to them.  These assignments are published on the linux-cve-announce
+mailing list as announcements on a frequent basis.
+
+Note, due to the layer at which the Linux kernel is in a system, almost
+any bug might be exploitable to compromise the security of the kernel,
+but the possibility of exploitation is often not evident when the bug is
+fixed.  Because of this, the CVE assignment team is overly cautious and
+assign CVE numbers to any bugfix that they identify.  This
+explains the seemingly large number of CVEs that are issued by the Linux
+kernel team.
+
+If the CVE assignment team misses a specific fix that any user feels
+should have a CVE assigned to it, please email them at <cve@kernel.org>
+and the team there will work with you on it.  Note that no potential
+security issues should be sent to this alias, it is ONLY for assignment
+of CVEs for fixes that are already in released kernel trees.  If you
+feel you have found an unfixed security issue, please follow the
+:doc:`normal Linux kernel security bug reporting
+process<../process/security-bugs>`.
+
+No CVEs will be automatically assigned for unfixed security issues in
+the Linux kernel; assignment will only automatically happen after a fix
+is available and applied to a stable kernel tree, and it will be tracked
+that way by the git commit id of the original fix.  If anyone wishes to
+have a CVE assigned before an issue is resolved with a commit, please
+contact the kernel CVE assignment team at <cve@kernel.org> to get an
+identifier assigned from their batch of reserved identifiers.
+
+No CVEs will be assigned for any issue found in a version of the kernel
+that is not currently being actively supported by the Stable/LTS kernel
+team.  A list of the currently supported kernel branches can be found at
+https://kernel.org/releases.html
+
+Disputes of assigned CVEs
+=========================
+
+The authority to dispute or modify an assigned CVE for a specific kernel
+change lies solely with the maintainers of the relevant subsystem
+affected.  This principle ensures a high degree of accuracy and
+accountability in vulnerability reporting.  Only those individuals with
+deep expertise and intimate knowledge of the subsystem can effectively
+assess the validity and scope of a reported vulnerability and determine
+its appropriate CVE designation.  Any attempt to modify or dispute a CVE
+outside of this designated authority could lead to confusion, inaccurate
+reporting, and ultimately, compromised systems.
+
+Invalid CVEs
+============
+
+If a security issue is found in a Linux kernel that is only supported by
+a Linux distribution due to the changes that have been made by that
+distribution, or due to the distribution supporting a kernel version
+that is no longer one of the kernel.org supported releases, then a CVE
+can not be assigned by the Linux kernel CVE team, and must be asked for
+from that Linux distribution itself.
+
+Any CVE that is assigned against the Linux kernel for an actively
+supported kernel version, by any group other than the kernel assignment
+CVE team should not be treated as a valid CVE.  Please notify the
+kernel CVE assignment team at <cve@kernel.org> so that they can work to
+invalidate such entries through the CNA remediation process.
+
+Applicability of specific CVEs
+==============================
+
+As the Linux kernel can be used in many different ways, with many
+different ways of accessing it by external users, or no access at all,
+the applicability of any specific CVE is up to the user of Linux to
+determine, it is not up to the CVE assignment team.  Please do not
+contact us to attempt to determine the applicability of any specific
+CVE.
+
+Also, as the source tree is so large, and any one system only uses a
+small subset of the source tree, any users of Linux should be aware that
+large numbers of assigned CVEs are not relevant for their systems.
+
+In short, we do not know your use case, and we do not know what portions
+of the kernel that you use, so there is no way for us to determine if a
+specific CVE is relevant for your system.
+
+As always, it is best to take all released kernel changes, as they are
+tested together in a unified whole by many community members, and not as
+individual cherry-picked changes.  Also note that for many bugs, the
+solution to the overall problem is not found in a single change, but by
+the sum of many fixes on top of each other.  Ideally CVEs will be
+assigned to all fixes for all issues, but sometimes we will fail to
+notice fixes, therefore assume that some changes without a CVE assigned
+might be relevant to take.
+
diff --git linux-libre-6.7-gnu/Documentation/process/development-process.rst linux-libre-6.8-gnu/Documentation/process/development-process.rst
index 61c627e41ba8..e34d7da58b7f 100644
--- linux-libre-6.7-gnu/Documentation/process/development-process.rst
+++ linux-libre-6.8-gnu/Documentation/process/development-process.rst
@@ -3,9 +3,17 @@
 A guide to the Kernel Development Process
 =========================================
 
-Contents:
+The purpose of this document is to help developers (and their managers)
+work with the development community with a minimum of frustration.  It is
+an attempt to document how this community works in a way which is
+accessible to those who are not intimately familiar with Linux kernel
+development (or, indeed, free software development in general).  While
+there is some technical material here, this is very much a process-oriented
+discussion which does not require a deep knowledge of kernel programming to
+understand.
 
 .. toctree::
+   :caption: Contents
    :numbered:
    :maxdepth: 2
 
@@ -17,12 +25,3 @@ Contents:
    6.Followthrough
    7.AdvancedTopics
    8.Conclusion
-
-The purpose of this document is to help developers (and their managers)
-work with the development community with a minimum of frustration.  It is
-an attempt to document how this community works in a way which is
-accessible to those who are not intimately familiar with Linux kernel
-development (or, indeed, free software development in general).  While
-there is some technical material here, this is very much a process-oriented
-discussion which does not require a deep knowledge of kernel programming to
-understand.
diff --git linux-libre-6.7-gnu/Documentation/process/howto.rst linux-libre-6.8-gnu/Documentation/process/howto.rst
index deb8235e20ff..6c73889c98fc 100644
--- linux-libre-6.7-gnu/Documentation/process/howto.rst
+++ linux-libre-6.8-gnu/Documentation/process/howto.rst
@@ -82,8 +82,7 @@ documentation files are also added which explain how to use the feature.
 When a kernel change causes the interface that the kernel exposes to
 userspace to change, it is recommended that you send the information or
 a patch to the manual pages explaining the change to the manual pages
-maintainer at mtk.manpages@gmail.com, and CC the list
-linux-api@vger.kernel.org.
+maintainer at alx@kernel.org, and CC the list linux-api@vger.kernel.org.
 
 Here is a list of files that are in the kernel source tree that are
 required reading:
diff --git linux-libre-6.7-gnu/Documentation/process/index.rst linux-libre-6.8-gnu/Documentation/process/index.rst
index a1daa309b58d..de9cbb7bd7eb 100644
--- linux-libre-6.7-gnu/Documentation/process/index.rst
+++ linux-libre-6.8-gnu/Documentation/process/index.rst
@@ -15,49 +15,97 @@ to learn about how our community works.  Reading these documents will make
 it much easier for you to get your changes merged with a minimum of
 trouble.
 
-Below are the essential guides that every developer should read.
+An introduction to how kernel development works
+-----------------------------------------------
+
+Read these documents first: an understanding of the material here will ease
+your entry into the kernel community.
 
 .. toctree::
    :maxdepth: 1
 
-   license-rules
    howto
-   code-of-conduct
-   code-of-conduct-interpretation
    development-process
    submitting-patches
-   handling-regressions
+   submit-checklist
+
+Tools and technical guides for kernel developers
+------------------------------------------------
+
+This is a collection of material that kernel developers should be familiar
+with.
+
+.. toctree::
+   :maxdepth: 1
+
+   changes
    programming-language
    coding-style
-   maintainer-handbooks
    maintainer-pgp-guide
    email-clients
+   applying-patches
+   backporting
+   adding-syscalls
+   volatile-considered-harmful
+   botching-up-ioctls
+
+Policy guides and developer statements
+--------------------------------------
+
+These are the rules that we try to live by in the kernel community (and
+beyond).
+
+.. toctree::
+   :maxdepth: 1
+
+   license-rules
+   code-of-conduct
+   code-of-conduct-interpretation
+   contribution-maturity-model
    kernel-enforcement-statement
    kernel-driver-statement
+   stable-api-nonsense
+   stable-kernel-rules
+   management-style
+   researcher-guidelines
 
-For security issues, see:
+Dealing with bugs
+-----------------
+
+Bugs are a fact of life; it is important that we handle them properly.
+The documents below describe our policies around the handling of a couple
+of special classes of bugs: regressions and security problems.
 
 .. toctree::
    :maxdepth: 1
 
+   handling-regressions
    security-bugs
+   cve
    embargoed-hardware-issues
 
-Other guides to the community that are of interest to most developers are:
+Maintainer information
+----------------------
+
+How to find the people who will accept your patches.
+
+.. toctree::
+   :maxdepth: 1
+
+   maintainer-handbooks
+   maintainers
+
+Other material
+--------------
+
+Here are some other guides to the community that are of interest to most
+developers:
 
 .. toctree::
    :maxdepth: 1
 
-   changes
-   stable-api-nonsense
-   management-style
-   stable-kernel-rules
-   submit-checklist
    kernel-docs
    deprecated
-   maintainers
-   researcher-guidelines
-   contribution-maturity-model
 
 These are some overall technical guides that have been put here for now for
 lack of a better place.
@@ -65,12 +113,7 @@ lack of a better place.
 .. toctree::
    :maxdepth: 1
 
-   applying-patches
-   backporting
-   adding-syscalls
    magic-number
-   volatile-considered-harmful
-   botching-up-ioctls
    clang-format
    ../arch/riscv/patch-acceptance
    ../core-api/unaligned-memory-access
diff --git linux-libre-6.7-gnu/Documentation/process/maintainer-netdev.rst linux-libre-6.8-gnu/Documentation/process/maintainer-netdev.rst
index 84ee60fceef2..fd96e4a3cef9 100644
--- linux-libre-6.7-gnu/Documentation/process/maintainer-netdev.rst
+++ linux-libre-6.8-gnu/Documentation/process/maintainer-netdev.rst
@@ -431,7 +431,7 @@ patchwork checks
 Checks in patchwork are mostly simple wrappers around existing kernel
 scripts, the sources are available at:
 
-https://github.com/kuba-moo/nipa/tree/master/tests
+https://github.com/linux-netdev/nipa/tree/master/tests
 
 **Do not** post your patches just to run them through the checks.
 You must ensure that your patches are ready by testing them locally
diff --git linux-libre-6.7-gnu/Documentation/process/security-bugs.rst linux-libre-6.8-gnu/Documentation/process/security-bugs.rst
index 692a3ba56cca..56c560a00b37 100644
--- linux-libre-6.7-gnu/Documentation/process/security-bugs.rst
+++ linux-libre-6.8-gnu/Documentation/process/security-bugs.rst
@@ -99,9 +99,8 @@ CVE assignment
 The security team does not assign CVEs, nor do we require them for
 reports or fixes, as this can needlessly complicate the process and may
 delay the bug handling.  If a reporter wishes to have a CVE identifier
-assigned, they should find one by themselves, for example by contacting
-MITRE directly.  However under no circumstances will a patch inclusion
-be delayed to wait for a CVE identifier to arrive.
+assigned for a confirmed issue, they can contact the :doc:`kernel CVE
+assignment team<../process/cve>` to obtain one.
 
 Non-disclosure agreements
 -------------------------
diff --git linux-libre-6.7-gnu/Documentation/process/submitting-patches.rst linux-libre-6.8-gnu/Documentation/process/submitting-patches.rst
index 86d346bcb8ef..66029999b587 100644
--- linux-libre-6.7-gnu/Documentation/process/submitting-patches.rst
+++ linux-libre-6.8-gnu/Documentation/process/submitting-patches.rst
@@ -790,10 +790,14 @@ Providing base tree information
 -------------------------------
 
 When other developers receive your patches and start the review process,
-it is often useful for them to know where in the tree history they
-should place your work. This is particularly useful for automated CI
-processes that attempt to run a series of tests in order to establish
-the quality of your submission before the maintainer starts the review.
+it is absolutely necessary for them to know what is the base
+commit/branch your work applies on, considering the sheer amount of
+maintainer trees present nowadays. Note again the **T:** entry in the
+MAINTAINERS file explained above.
+
+This is even more important for automated CI processes that attempt to
+run a series of tests in order to establish the quality of your
+submission before the maintainer starts the review.
 
 If you are using ``git format-patch`` to generate your patches, you can
 automatically include the base tree information in your submission by
@@ -836,6 +840,9 @@ letter or in the first patch of the series and it should be placed
 either below the ``---`` line or at the very bottom of all other
 content, right before your email signature.
 
+Make sure that base commit is in an official maintainer/mainline tree
+and not in some internal, accessible only to you tree - otherwise it
+would be worthless.
 
 References
 ----------
diff --git linux-libre-6.7-gnu/Documentation/rust/arch-support.rst linux-libre-6.8-gnu/Documentation/rust/arch-support.rst
index b91e9ef4d0c2..73203ba1e901 100644
--- linux-libre-6.7-gnu/Documentation/rust/arch-support.rst
+++ linux-libre-6.8-gnu/Documentation/rust/arch-support.rst
@@ -12,10 +12,11 @@ which uses ``libclang``.
 Below is a general summary of architectures that currently work. Level of
 support corresponds to ``S`` values in the ``MAINTAINERS`` file.
 
-============  ================  ==============================================
-Architecture  Level of support  Constraints
-============  ================  ==============================================
-``um``        Maintained        ``x86_64`` only.
-``x86``       Maintained        ``x86_64`` only.
-============  ================  ==============================================
+=============  ================  ==============================================
+Architecture   Level of support  Constraints
+=============  ================  ==============================================
+``loongarch``  Maintained        -
+``um``         Maintained        ``x86_64`` only.
+``x86``        Maintained        ``x86_64`` only.
+=============  ================  ==============================================
 
diff --git linux-libre-6.7-gnu/Documentation/rust/coding-guidelines.rst linux-libre-6.8-gnu/Documentation/rust/coding-guidelines.rst
index aa8ed082613e..05542840b16c 100644
--- linux-libre-6.7-gnu/Documentation/rust/coding-guidelines.rst
+++ linux-libre-6.8-gnu/Documentation/rust/coding-guidelines.rst
@@ -177,6 +177,19 @@ please take a look at the ``rustdoc`` book at:
 
 	https://doc.rust-lang.org/rustdoc/how-to-write-documentation.html
 
+In addition, the kernel supports creating links relative to the source tree by
+prefixing the link destination with ``srctree/``. For instance:
+
+.. code-block:: rust
+
+	//! C header: [`include/linux/printk.h`](srctree/include/linux/printk.h)
+
+or:
+
+.. code-block:: rust
+
+	/// [`struct mutex`]: srctree/include/linux/mutex.h
+
 
 Naming
 ------
diff --git linux-libre-6.7-gnu/Documentation/rust/general-information.rst linux-libre-6.8-gnu/Documentation/rust/general-information.rst
index 081397827a7e..236c6dd3c647 100644
--- linux-libre-6.7-gnu/Documentation/rust/general-information.rst
+++ linux-libre-6.8-gnu/Documentation/rust/general-information.rst
@@ -77,3 +77,27 @@ configuration:
 	#[cfg(CONFIG_X="y")]   // Enabled as a built-in (`y`)
 	#[cfg(CONFIG_X="m")]   // Enabled as a module   (`m`)
 	#[cfg(not(CONFIG_X))]  // Disabled
+
+
+Testing
+-------
+
+There are the tests that come from the examples in the Rust documentation
+and get transformed into KUnit tests. These can be run via KUnit. For example
+via ``kunit_tool`` (``kunit.py``) on the command line::
+
+	./tools/testing/kunit/kunit.py run --make_options LLVM=1 --arch x86_64 --kconfig_add CONFIG_RUST=y
+
+Alternatively, KUnit can run them as kernel built-in at boot. Refer to
+Documentation/dev-tools/kunit/index.rst for the general KUnit documentation
+and Documentation/dev-tools/kunit/architecture.rst for the details of kernel
+built-in vs. command line testing.
+
+Additionally, there are the ``#[test]`` tests. These can be run using
+the ``rusttest`` Make target::
+
+	make LLVM=1 rusttest
+
+This requires the kernel ``.config`` and downloads external repositories.
+It runs the ``#[test]`` tests on the host (currently) and thus is fairly
+limited in what these tests can test.
diff --git linux-libre-6.7-gnu/Documentation/rust/quick-start.rst linux-libre-6.8-gnu/Documentation/rust/quick-start.rst
index f382914f4191..cc3f11e0d441 100644
--- linux-libre-6.7-gnu/Documentation/rust/quick-start.rst
+++ linux-libre-6.8-gnu/Documentation/rust/quick-start.rst
@@ -33,14 +33,18 @@ A particular version of the Rust compiler is required. Newer versions may or
 may not work because, for the moment, the kernel depends on some unstable
 Rust features.
 
-If ``rustup`` is being used, enter the checked out source code directory
-and run::
+If ``rustup`` is being used, enter the kernel build directory (or use
+``--path=<build-dir>`` argument to the ``set`` sub-command) and run::
 
 	rustup override set $(scripts/min-tool-version.sh rustc)
 
 This will configure your working directory to use the correct version of
-``rustc`` without affecting your default toolchain. If you are not using
-``rustup``, fetch a standalone installer from:
+``rustc`` without affecting your default toolchain.
+
+Note that the override applies to the current working directory (and its
+sub-directories).
+
+If you are not using ``rustup``, fetch a standalone installer from:
 
 	https://forge.rust-lang.org/infra/other-installation-methods.html#standalone
 
@@ -76,7 +80,7 @@ libclang
 
 ``libclang`` (part of LLVM) is used by ``bindgen`` to understand the C code
 in the kernel, which means LLVM needs to be installed; like when the kernel
-is compiled with ``CC=clang`` or ``LLVM=1``.
+is compiled with ``LLVM=1``.
 
 Linux distributions are likely to have a suitable one available, so it is
 best to check that first.
@@ -229,10 +233,6 @@ at the moment. That is::
 
 	make LLVM=1
 
-For architectures that do not support a full LLVM toolchain, use::
-
-	make CC=clang
-
 Using GCC also works for some configurations, but it is very experimental at
 the moment.
 
diff --git linux-libre-6.7-gnu/Documentation/scheduler/sched-design-CFS.rst linux-libre-6.8-gnu/Documentation/scheduler/sched-design-CFS.rst
index f68919800f05..6cffffe26500 100644
--- linux-libre-6.7-gnu/Documentation/scheduler/sched-design-CFS.rst
+++ linux-libre-6.8-gnu/Documentation/scheduler/sched-design-CFS.rst
@@ -180,7 +180,7 @@ This is the (partial) list of the hooks:
    compat_yield sysctl is turned on; in that case, it places the scheduling
    entity at the right-most end of the red-black tree.
 
- - check_preempt_curr(...)
+ - wakeup_preempt(...)
 
    This function checks if a task that entered the runnable state should
    preempt the currently running task.
@@ -189,10 +189,10 @@ This is the (partial) list of the hooks:
 
    This function chooses the most appropriate task eligible to run next.
 
- - set_curr_task(...)
+ - set_next_task(...)
 
-   This function is called when a task changes its scheduling class or changes
-   its task group.
+   This function is called when a task changes its scheduling class, changes
+   its task group or is scheduled.
 
  - task_tick(...)
 
diff --git linux-libre-6.7-gnu/Documentation/scheduler/schedutil.rst linux-libre-6.8-gnu/Documentation/scheduler/schedutil.rst
index 32c7d69fc86c..803fba8fc714 100644
--- linux-libre-6.7-gnu/Documentation/scheduler/schedutil.rst
+++ linux-libre-6.8-gnu/Documentation/scheduler/schedutil.rst
@@ -90,8 +90,8 @@ For more detail see:
  - Documentation/scheduler/sched-capacity.rst:"1. CPU Capacity + 2. Task utilization"
 
 
-UTIL_EST / UTIL_EST_FASTUP
-==========================
+UTIL_EST
+========
 
 Because periodic tasks have their averages decayed while they sleep, even
 though when running their expected utilization will be the same, they suffer a
@@ -99,8 +99,7 @@ though when running their expected utilization will be the same, they suffer a
 
 To alleviate this (a default enabled option) UTIL_EST drives an Infinite
 Impulse Response (IIR) EWMA with the 'running' value on dequeue -- when it is
-highest. A further default enabled option UTIL_EST_FASTUP modifies the IIR
-filter to instantly increase and only decay on decrease.
+highest. UTIL_EST filters to instantly increase and only decay on decrease.
 
 A further runqueue wide sum (of runnable tasks) is maintained of:
 
diff --git linux-libre-6.7-gnu/Documentation/security/keys/trusted-encrypted.rst linux-libre-6.8-gnu/Documentation/security/keys/trusted-encrypted.rst
index 9bc9db8ec651..e989b9802f92 100644
--- linux-libre-6.7-gnu/Documentation/security/keys/trusted-encrypted.rst
+++ linux-libre-6.8-gnu/Documentation/security/keys/trusted-encrypted.rst
@@ -88,7 +88,7 @@ safe.
      (2) TEE
 
          TEEs have well-documented, standardized client interface and APIs. For
-         more details refer to ``Documentation/staging/tee.rst``.
+         more details refer to ``Documentation/driver-api/tee.rst``.
 
      (3) CAAM
 
diff --git linux-libre-6.7-gnu/Documentation/sound/soc/dapm.rst linux-libre-6.8-gnu/Documentation/sound/soc/dapm.rst
index 8e44107933ab..c3154ce6e1b2 100644
--- linux-libre-6.7-gnu/Documentation/sound/soc/dapm.rst
+++ linux-libre-6.8-gnu/Documentation/sound/soc/dapm.rst
@@ -234,7 +234,7 @@ corresponding soft power control. In this case it is necessary to create
 a virtual widget - a widget with no control bits e.g.
 ::
 
-  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_DAPM_NOPM, 0, 0, NULL, 0),
+  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 
 This can be used to merge to signal paths together in software.
 
diff --git linux-libre-6.7-gnu/Documentation/sphinx-static/custom.css linux-libre-6.8-gnu/Documentation/sphinx-static/custom.css
index 084a884f6fb7..f4285417c71a 100644
--- linux-libre-6.7-gnu/Documentation/sphinx-static/custom.css
+++ linux-libre-6.8-gnu/Documentation/sphinx-static/custom.css
@@ -7,6 +7,10 @@
 div.body h1 { font-size: 180%; }
 div.body h2 { font-size: 150%; }
 div.body h3 { font-size: 130%; }
+div.body h4 { font-size: 110%; }
+
+/* toctree captions are styled like h2 */
+div.toctree-wrapper p.caption[role=heading] { font-size: 150%; }
 
 /* Tighten up the layout slightly */
 div.body { padding: 0 15px 0 10px; }
@@ -20,6 +24,12 @@ div.document {
     width: auto;
 }
 
+/* Size the logo appropriately */
+img.logo {
+    width: 104px;
+    margin-bottom: 20px;
+}
+
 /*
  * Parameters for the display of function prototypes and such included
  * from C source files.
@@ -73,3 +83,56 @@ input.kernel-toc-toggle { display: none; }
     h3.kernel-toc-contents { display: inline; }
     div.kerneltoc a { color: black; }
 }
+
+/* Language selection menu */
+
+div.admonition {
+    /*
+     * Make sure we don't overlap notes and warnings at the top of the
+     * document.
+     */
+    clear: both;
+}
+
+div.language-selection {
+    background: #eeeeee;
+    border: 1px solid #cccccc;
+    margin-bottom: 1em;
+    padding: .5em;
+
+    position: relative;
+    float: right;
+}
+
+div.language-selection a {
+    display: block;
+    padding: 0.5em;
+    color: #333333;
+    text-decoration: none;
+}
+
+div.language-selection ul {
+    display: none;
+    position: absolute;
+
+    /* Align with the parent div */
+    top: 100%;
+    right: 0;
+    margin: 0;
+
+    list-style: none;
+
+    background: #fafafa;
+    border: 1px solid #cccccc;
+
+    /* Never break menu item lines */
+    white-space: nowrap;
+}
+
+div.language-selection:hover ul {
+    display: block;
+}
+
+div.language-selection ul li:hover {
+    background: #dddddd;
+}
diff --git linux-libre-6.7-gnu/Documentation/sphinx-static/theme_overrides.css linux-libre-6.8-gnu/Documentation/sphinx-static/theme_overrides.css
index f6f2b941a5d6..79000b26e64e 100644
--- linux-libre-6.7-gnu/Documentation/sphinx-static/theme_overrides.css
+++ linux-libre-6.8-gnu/Documentation/sphinx-static/theme_overrides.css
@@ -81,11 +81,6 @@ div[class^="highlight"] pre {
      *   - hide the permalink symbol as long as link is not hovered
      */
 
-    .toc-title {
-        font-size: 150%;
-	font-weight: bold;
-    }
-
     caption, .wy-table caption, .rst-content table.field-list caption {
         font-size: 100%;
     }
diff --git linux-libre-6.7-gnu/Documentation/sphinx/automarkup.py linux-libre-6.8-gnu/Documentation/sphinx/automarkup.py
index 06b34740bf90..a413f8dd5115 100644
--- linux-libre-6.7-gnu/Documentation/sphinx/automarkup.py
+++ linux-libre-6.8-gnu/Documentation/sphinx/automarkup.py
@@ -7,11 +7,7 @@
 from docutils import nodes
 import sphinx
 from sphinx import addnodes
-if sphinx.version_info[0] < 2 or \
-   sphinx.version_info[0] == 2 and sphinx.version_info[1] < 1:
-    from sphinx.environment import NoUri
-else:
-    from sphinx.errors import NoUri
+from sphinx.errors import NoUri
 import re
 from itertools import chain
 
@@ -74,6 +70,12 @@ Skipfuncs = [ 'open', 'close', 'read', 'write', 'fcntl', 'mmap',
 
 c_namespace = ''
 
+#
+# Detect references to commits.
+#
+RE_git = re.compile(r'commit\s+(?P<rev>[0-9a-f]{12,40})(?:\s+\(".*?"\))?',
+    flags=re.IGNORECASE | re.DOTALL)
+
 def markup_refs(docname, app, node):
     t = node.astext()
     done = 0
@@ -90,7 +92,8 @@ def markup_refs(docname, app, node):
                            RE_struct: markup_c_ref,
                            RE_union: markup_c_ref,
                            RE_enum: markup_c_ref,
-                           RE_typedef: markup_c_ref}
+                           RE_typedef: markup_c_ref,
+                           RE_git: markup_git}
 
     if sphinx.version_info[0] >= 3:
         markup_func = markup_func_sphinx3
@@ -276,6 +279,17 @@ def get_c_namespace(app, docname):
                 return match.group(1)
     return ''
 
+def markup_git(docname, app, match):
+    # While we could probably assume that we are running in a git
+    # repository, we can't know for sure, so let's just mechanically
+    # turn them into git.kernel.org links without checking their
+    # validity. (Maybe we can do something in the future to warn about
+    # these references if this is explicitly requested.)
+    text = match.group(0)
+    rev = match.group('rev')
+    return nodes.reference('', nodes.Text(text),
+        refuri=f'https://git.kernel.org/torvalds/c/{rev}')
+
 def auto_markup(app, doctree, name):
     global c_namespace
     c_namespace = get_c_namespace(app, name)
diff --git linux-libre-6.7-gnu/Documentation/sphinx/cdomain.py linux-libre-6.8-gnu/Documentation/sphinx/cdomain.py
index 4eb150bf509c..e6959af25402 100644
--- linux-libre-6.7-gnu/Documentation/sphinx/cdomain.py
+++ linux-libre-6.8-gnu/Documentation/sphinx/cdomain.py
@@ -127,11 +127,7 @@ def setup(app):
 
     # Handle easy Sphinx 3.1+ simple new tags: :c:expr and .. c:namespace::
     app.connect('source-read', c_markups)
-
-    if (major == 1 and minor < 8):
-        app.override_domain(CDomain)
-    else:
-        app.add_domain(CDomain, override=True)
+    app.add_domain(CDomain, override=True)
 
     return dict(
         version = __version__,
diff --git linux-libre-6.7-gnu/Documentation/sphinx/kernel_abi.py linux-libre-6.8-gnu/Documentation/sphinx/kernel_abi.py
index 49797c55479c..5911bd0d7965 100644
--- linux-libre-6.7-gnu/Documentation/sphinx/kernel_abi.py
+++ linux-libre-6.8-gnu/Documentation/sphinx/kernel_abi.py
@@ -39,8 +39,6 @@ import sys
 import re
 import kernellog
 
-from os import path
-
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
 from docutils.parsers.rst import directives, Directive
@@ -73,60 +71,26 @@ class KernelCmd(Directive):
     }
 
     def run(self):
-
         doc = self.state.document
         if not doc.settings.file_insertion_enabled:
             raise self.warning("docutils: file insertion disabled")
 
-        env = doc.settings.env
-        cwd = path.dirname(doc.current_source)
-        cmd = "get_abi.pl rest --enable-lineno --dir "
-        cmd += self.arguments[0]
-
-        if 'rst' in self.options:
-            cmd += " --rst-source"
+        srctree = os.path.abspath(os.environ["srctree"])
 
-        srctree = path.abspath(os.environ["srctree"])
+        args = [
+            os.path.join(srctree, 'scripts/get_abi.pl'),
+            'rest',
+            '--enable-lineno',
+            '--dir', os.path.join(srctree, 'Documentation', self.arguments[0]),
+        ]
 
-        fname = cmd
-
-        # extend PATH with $(srctree)/scripts
-        path_env = os.pathsep.join([
-            srctree + os.sep + "scripts",
-            os.environ["PATH"]
-        ])
-        shell_env = os.environ.copy()
-        shell_env["PATH"]    = path_env
-        shell_env["srctree"] = srctree
+        if 'rst' in self.options:
+            args.append('--rst-source')
 
-        lines = self.runCmd(cmd, shell=True, cwd=cwd, env=shell_env)
+        lines = subprocess.check_output(args, cwd=os.path.dirname(doc.current_source)).decode('utf-8')
         nodeList = self.nestedParse(lines, self.arguments[0])
         return nodeList
 
-    def runCmd(self, cmd, **kwargs):
-        u"""Run command ``cmd`` and return its stdout as unicode."""
-
-        try:
-            proc = subprocess.Popen(
-                cmd
-                , stdout = subprocess.PIPE
-                , stderr = subprocess.PIPE
-                , **kwargs
-            )
-            out, err = proc.communicate()
-
-            out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8')
-
-            if proc.returncode != 0:
-                raise self.severe(
-                    u"command '%s' failed with return code %d"
-                    % (cmd, proc.returncode)
-                )
-        except OSError as exc:
-            raise self.severe(u"problems with '%s' directive: %s."
-                              % (self.name, ErrorString(exc)))
-        return out
-
     def nestedParse(self, lines, fname):
         env = self.state.document.settings.env
         content = ViewList()
diff --git linux-libre-6.7-gnu/Documentation/sphinx/kernel_feat.py linux-libre-6.8-gnu/Documentation/sphinx/kernel_feat.py
index b5fa2f0542a5..03ace5f01b5c 100644
--- linux-libre-6.7-gnu/Documentation/sphinx/kernel_feat.py
+++ linux-libre-6.8-gnu/Documentation/sphinx/kernel_feat.py
@@ -37,8 +37,6 @@ import re
 import subprocess
 import sys
 
-from os import path
-
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
 from docutils.parsers.rst import directives, Directive
@@ -76,33 +74,26 @@ class KernelFeat(Directive):
         self.state.document.settings.env.app.warn(message, prefix="")
 
     def run(self):
-
         doc = self.state.document
         if not doc.settings.file_insertion_enabled:
             raise self.warning("docutils: file insertion disabled")
 
         env = doc.settings.env
-        cwd = path.dirname(doc.current_source)
-        cmd = "get_feat.pl rest --enable-fname --dir "
-        cmd += self.arguments[0]
-
-        if len(self.arguments) > 1:
-            cmd += " --arch " + self.arguments[1]
 
-        srctree = path.abspath(os.environ["srctree"])
+        srctree = os.path.abspath(os.environ["srctree"])
 
-        fname = cmd
+        args = [
+            os.path.join(srctree, 'scripts/get_feat.pl'),
+            'rest',
+            '--enable-fname',
+            '--dir',
+            os.path.join(srctree, 'Documentation', self.arguments[0]),
+        ]
 
-        # extend PATH with $(srctree)/scripts
-        path_env = os.pathsep.join([
-            srctree + os.sep + "scripts",
-            os.environ["PATH"]
-        ])
-        shell_env = os.environ.copy()
-        shell_env["PATH"]    = path_env
-        shell_env["srctree"] = srctree
+        if len(self.arguments) > 1:
+            args.extend(['--arch', self.arguments[1]])
 
-        lines = self.runCmd(cmd, shell=True, cwd=cwd, env=shell_env)
+        lines = subprocess.check_output(args, cwd=os.path.dirname(doc.current_source)).decode('utf-8')
 
         line_regex = re.compile(r"^\.\. FILE (\S+)$")
 
@@ -118,33 +109,9 @@ class KernelFeat(Directive):
             else:
                 out_lines += line + "\n"
 
-        nodeList = self.nestedParse(out_lines, fname)
+        nodeList = self.nestedParse(out_lines, self.arguments[0])
         return nodeList
 
-    def runCmd(self, cmd, **kwargs):
-        u"""Run command ``cmd`` and return its stdout as unicode."""
-
-        try:
-            proc = subprocess.Popen(
-                cmd
-                , stdout = subprocess.PIPE
-                , stderr = subprocess.PIPE
-                , **kwargs
-            )
-            out, err = proc.communicate()
-
-            out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8')
-
-            if proc.returncode != 0:
-                raise self.severe(
-                    u"command '%s' failed with return code %d"
-                    % (cmd, proc.returncode)
-                )
-        except OSError as exc:
-            raise self.severe(u"problems with '%s' directive: %s."
-                              % (self.name, ErrorString(exc)))
-        return out
-
     def nestedParse(self, lines, fname):
         content = ViewList()
         node    = nodes.section()
diff --git linux-libre-6.7-gnu/Documentation/sphinx/kfigure.py linux-libre-6.8-gnu/Documentation/sphinx/kfigure.py
index 13e885bbd499..97166333b727 100644
--- linux-libre-6.7-gnu/Documentation/sphinx/kfigure.py
+++ linux-libre-6.8-gnu/Documentation/sphinx/kfigure.py
@@ -61,13 +61,7 @@ import sphinx
 from sphinx.util.nodes import clean_astext
 import kernellog
 
-# Get Sphinx version
-major, minor, patch = sphinx.version_info[:3]
-if major == 1 and minor > 3:
-    # patches.Figure only landed in Sphinx 1.4
-    from sphinx.directives.patches import Figure  # pylint: disable=C0413
-else:
-    Figure = images.Figure
+Figure = images.Figure
 
 __version__  = '1.0.0'
 
diff --git linux-libre-6.7-gnu/Documentation/sphinx/requirements.txt linux-libre-6.8-gnu/Documentation/sphinx/requirements.txt
index 335b53df35e2..5d47ed443949 100644
--- linux-libre-6.7-gnu/Documentation/sphinx/requirements.txt
+++ linux-libre-6.8-gnu/Documentation/sphinx/requirements.txt
@@ -1,3 +1,6 @@
 # jinja2>=3.1 is not compatible with Sphinx<4.0
 jinja2<3.1
+# alabaster>=0.7.14 is not compatible with Sphinx<=3.3
+alabaster<0.7.14
 Sphinx==2.4.4
+pyyaml
diff --git linux-libre-6.7-gnu/Documentation/sphinx/templates/kernel-toc.html linux-libre-6.8-gnu/Documentation/sphinx/templates/kernel-toc.html
index b58efa99df52..41f1efbe64bb 100644
--- linux-libre-6.7-gnu/Documentation/sphinx/templates/kernel-toc.html
+++ linux-libre-6.8-gnu/Documentation/sphinx/templates/kernel-toc.html
@@ -12,5 +12,7 @@
 <script type="text/javascript"> <!--
   var sbar = document.getElementsByClassName("sphinxsidebar")[0];
   let currents = document.getElementsByClassName("current")
-  sbar.scrollTop = currents[currents.length - 1].offsetTop;
+  if (currents.length) {
+    sbar.scrollTop = currents[currents.length - 1].offsetTop;
+  }
   --> </script>
diff --git linux-libre-6.7-gnu/Documentation/sphinx/templates/translations.html linux-libre-6.8-gnu/Documentation/sphinx/templates/translations.html
new file mode 100644
index 000000000000..8df5d42d8dcd
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/sphinx/templates/translations.html
@@ -0,0 +1,15 @@
+<!-- SPDX-License-Identifier: GPL-2.0 -->
+<!-- Copyright © 2023, Oracle and/or its affiliates. -->
+
+{# Create a language menu for translations #}
+{% if languages|length > 0: %}
+<div class="language-selection">
+{{ current_language }}
+
+<ul>
+{% for ref in languages: %}
+<li><a href="{{ ref.refuri }}">{{ ref.astext() }}</a></li>
+{% endfor %}
+</ul>
+</div>
+{% endif %}
diff --git linux-libre-6.7-gnu/Documentation/sphinx/translations.py linux-libre-6.8-gnu/Documentation/sphinx/translations.py
new file mode 100644
index 000000000000..32c2b32b2b5e
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/sphinx/translations.py
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright © 2023, Oracle and/or its affiliates.
+# Author: Vegard Nossum <vegard.nossum@oracle.com>
+#
+# Add translation links to the top of the document.
+#
+
+import os
+
+from docutils import nodes
+from docutils.transforms import Transform
+
+import sphinx
+from sphinx import addnodes
+from sphinx.errors import NoUri
+
+all_languages = {
+    # English is always first
+    None: 'English',
+
+    # Keep the rest sorted alphabetically
+    'zh_CN': 'Chinese (Simplified)',
+    'zh_TW': 'Chinese (Traditional)',
+    'it_IT': 'Italian',
+    'ja_JP': 'Japanese',
+    'ko_KR': 'Korean',
+    'sp_SP': 'Spanish',
+}
+
+class LanguagesNode(nodes.Element):
+    pass
+
+class TranslationsTransform(Transform):
+    default_priority = 900
+
+    def apply(self):
+        app = self.document.settings.env.app
+        docname = self.document.settings.env.docname
+
+        this_lang_code = None
+        components = docname.split(os.sep)
+        if components[0] == 'translations' and len(components) > 2:
+            this_lang_code = components[1]
+
+            # normalize docname to be the untranslated one
+            docname = os.path.join(*components[2:])
+
+        new_nodes = LanguagesNode()
+        new_nodes['current_language'] = all_languages[this_lang_code]
+
+        for lang_code, lang_name in all_languages.items():
+            if lang_code == this_lang_code:
+                continue
+
+            if lang_code is None:
+                target_name = docname
+            else:
+                target_name = os.path.join('translations', lang_code, docname)
+
+            pxref = addnodes.pending_xref('', refdomain='std',
+                reftype='doc', reftarget='/' + target_name, modname=None,
+                classname=None, refexplicit=True)
+            pxref += nodes.Text(lang_name)
+            new_nodes += pxref
+
+        self.document.insert(0, new_nodes)
+
+def process_languages(app, doctree, docname):
+    for node in doctree.traverse(LanguagesNode):
+        if app.builder.format not in ['html']:
+            node.parent.remove(node)
+            continue
+
+        languages = []
+
+        # Iterate over the child nodes; any resolved links will have
+        # the type 'nodes.reference', while unresolved links will be
+        # type 'nodes.Text'.
+        languages = list(filter(lambda xref:
+            isinstance(xref, nodes.reference), node.children))
+
+        html_content = app.builder.templates.render('translations.html',
+            context={
+                'current_language': node['current_language'],
+                'languages': languages,
+            })
+
+        node.replace_self(nodes.raw('', html_content, format='html'))
+
+def setup(app):
+    app.add_node(LanguagesNode)
+    app.add_transform(TranslationsTransform)
+    app.connect('doctree-resolved', process_languages)
+
+    return {
+        'parallel_read_safe': True,
+        'parallel_write_safe': True,
+    }
diff --git linux-libre-6.7-gnu/Documentation/spi/pxa2xx.rst linux-libre-6.8-gnu/Documentation/spi/pxa2xx.rst
index 04f2a3856c40..19479b801826 100644
--- linux-libre-6.7-gnu/Documentation/spi/pxa2xx.rst
+++ linux-libre-6.8-gnu/Documentation/spi/pxa2xx.rst
@@ -3,13 +3,13 @@ PXA2xx SPI on SSP driver HOWTO
 ==============================
 
 This a mini HOWTO on the pxa2xx_spi driver. The driver turns a PXA2xx
-synchronous serial port into an SPI master controller
+synchronous serial port into an SPI host controller
 (see Documentation/spi/spi-summary.rst). The driver has the following features
 
 - Support for any PXA2xx and compatible SSP.
 - SSP PIO and SSP DMA data transfers.
 - External and Internal (SSPFRM) chip selects.
-- Per slave device (chip) configuration.
+- Per peripheral device (chip) configuration.
 - Full suspend, freeze, resume support.
 
 The driver is built around a &struct spi_message FIFO serviced by kernel
@@ -17,10 +17,10 @@ thread. The kernel thread, spi_pump_messages(), drives message FIFO and
 is responsible for queuing SPI transactions and setting up and launching
 the DMA or interrupt driven transfers.
 
-Declaring PXA2xx Master Controllers
------------------------------------
-Typically, for a legacy platform, an SPI master is defined in the
-arch/.../mach-*/board-*.c as a "platform device". The master configuration
+Declaring PXA2xx host controllers
+---------------------------------
+Typically, for a legacy platform, an SPI host controller is defined in the
+arch/.../mach-*/board-*.c as a "platform device". The host controller configuration
 is passed to the driver via a table found in include/linux/spi/pxa2xx_spi.h::
 
   struct pxa2xx_spi_controller {
@@ -30,7 +30,7 @@ is passed to the driver via a table found in include/linux/spi/pxa2xx_spi.h::
   };
 
 The "pxa2xx_spi_controller.num_chipselect" field is used to determine the number of
-slave device (chips) attached to this SPI master.
+peripheral devices (chips) attached to this SPI host controller.
 
 The "pxa2xx_spi_controller.enable_dma" field informs the driver that SSP DMA should
 be used. This caused the driver to acquire two DMA channels: Rx channel and
@@ -40,8 +40,8 @@ See the "PXA2xx Developer Manual" section "DMA Controller".
 For the new platforms the description of the controller and peripheral devices
 comes from Device Tree or ACPI.
 
-NSSP MASTER SAMPLE
-------------------
+NSSP HOST SAMPLE
+----------------
 Below is a sample configuration using the PXA255 NSSP for a legacy platform::
 
   static struct resource pxa_spi_nssp_resources[] = {
@@ -57,7 +57,7 @@ Below is a sample configuration using the PXA255 NSSP for a legacy platform::
 	},
   };
 
-  static struct pxa2xx_spi_controller pxa_nssp_master_info = {
+  static struct pxa2xx_spi_controller pxa_nssp_controller_info = {
 	.num_chipselect = 1, /* Matches the number of chips attached to NSSP */
 	.enable_dma = 1, /* Enables NSSP DMA */
   };
@@ -68,7 +68,7 @@ Below is a sample configuration using the PXA255 NSSP for a legacy platform::
 	.resource = pxa_spi_nssp_resources,
 	.num_resources = ARRAY_SIZE(pxa_spi_nssp_resources),
 	.dev = {
-		.platform_data = &pxa_nssp_master_info, /* Passed to driver */
+		.platform_data = &pxa_nssp_controller_info, /* Passed to driver */
 	},
   };
 
@@ -81,17 +81,17 @@ Below is a sample configuration using the PXA255 NSSP for a legacy platform::
 	(void)platform_add_device(devices, ARRAY_SIZE(devices));
   }
 
-Declaring Slave Devices
------------------------
-Typically, for a legacy platform, each SPI slave (chip) is defined in the
+Declaring peripheral devices
+----------------------------
+Typically, for a legacy platform, each SPI peripheral device (chip) is defined in the
 arch/.../mach-*/board-*.c using the "spi_board_info" structure found in
 "linux/spi/spi.h". See "Documentation/spi/spi-summary.rst" for additional
 information.
 
-Each slave device attached to the PXA must provide slave specific configuration
+Each peripheral device (chip) attached to the PXA2xx must provide specific chip configuration
 information via the structure "pxa2xx_spi_chip" found in
-"include/linux/spi/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
-will uses the configuration whenever the driver communicates with the slave
+"include/linux/spi/pxa2xx_spi.h". The PXA2xx host controller driver will use
+the configuration whenever the driver communicates with the peripheral
 device. All fields are optional.
 
 ::
@@ -123,7 +123,7 @@ dma_burst_size == 0.
 The "pxa2xx_spi_chip.timeout" fields is used to efficiently handle
 trailing bytes in the SSP receiver FIFO. The correct value for this field is
 dependent on the SPI bus speed ("spi_board_info.max_speed_hz") and the specific
-slave device.  Please note that the PXA2xx SSP 1 does not support trailing byte
+peripheral device. Please note that the PXA2xx SSP 1 does not support trailing byte
 timeouts and must busy-wait any trailing bytes.
 
 NOTE: the SPI driver cannot control the chip select if SSPFRM is used, so the
@@ -132,8 +132,8 @@ asserted around the complete message. Use SSPFRM as a GPIO (through a descriptor
 to accommodate these chips.
 
 
-NSSP SLAVE SAMPLE
------------------
+NSSP PERIPHERAL SAMPLE
+----------------------
 For a legacy platform or in some other cases, the pxa2xx_spi_chip structure
 is passed to the pxa2xx_spi driver in the "spi_board_info.controller_data"
 field. Below is a sample configuration using the PXA255 NSSP.
@@ -161,16 +161,16 @@ field. Below is a sample configuration using the PXA255 NSSP.
 		.bus_num = 2, /* Framework bus number */
 		.chip_select = 0, /* Framework chip select */
 		.platform_data = NULL; /* No spi_driver specific config */
-		.controller_data = &cs8415a_chip_info, /* Master chip config */
-		.irq = STREETRACER_APCI_IRQ, /* Slave device interrupt */
+		.controller_data = &cs8415a_chip_info, /* Host controller config */
+		.irq = STREETRACER_APCI_IRQ, /* Peripheral device interrupt */
 	},
 	{
 		.modalias = "cs8405a", /* Name of spi_driver for this device */
 		.max_speed_hz = 3686400, /* Run SSP as fast a possible */
 		.bus_num = 2, /* Framework bus number */
 		.chip_select = 1, /* Framework chip select */
-		.controller_data = &cs8405a_chip_info, /* Master chip config */
-		.irq = STREETRACER_APCI_IRQ, /* Slave device interrupt */
+		.controller_data = &cs8405a_chip_info, /* Host controller config */
+		.irq = STREETRACER_APCI_IRQ, /* Peripheral device interrupt */
 	},
   };
 
@@ -193,17 +193,14 @@ mode supports both coherent and stream based DMA mappings.
 The following logic is used to determine the type of I/O to be used on
 a per "spi_transfer" basis::
 
-  if !enable_dma then
-	always use PIO transfers
+  if spi_message.len > 65536 then
+	if spi_message.is_dma_mapped or rx_dma_buf != 0 or tx_dma_buf != 0 then
+		reject premapped transfers
 
-  if spi_message.len > 8191 then
 	print "rate limited" warning
 	use PIO transfers
 
-  if spi_message.is_dma_mapped and rx_dma_buf != 0 and tx_dma_buf != 0 then
-	use coherent DMA mode
-
-  if rx_buf and tx_buf are aligned on 8 byte boundary then
+  if enable_dma and the size is in the range [DMA burst size..65536] then
 	use streaming DMA mode
 
   otherwise
diff --git linux-libre-6.7-gnu/Documentation/staging/index.rst linux-libre-6.8-gnu/Documentation/staging/index.rst
index ded8254bc0d7..71592f3ce89b 100644
--- linux-libre-6.7-gnu/Documentation/staging/index.rst
+++ linux-libre-6.8-gnu/Documentation/staging/index.rst
@@ -12,5 +12,4 @@ Unsorted Documentation
    rpmsg
    speculation
    static-keys
-   tee
    xz
diff --git linux-libre-6.7-gnu/Documentation/staging/rpmsg.rst linux-libre-6.8-gnu/Documentation/staging/rpmsg.rst
index 1ce353cb232a..dba3e5f65612 100644
--- linux-libre-6.7-gnu/Documentation/staging/rpmsg.rst
+++ linux-libre-6.8-gnu/Documentation/staging/rpmsg.rst
@@ -68,13 +68,14 @@ User API
 
 ::
 
-  int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int len);
+  int rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len);
 
-sends a message across to the remote processor on a given channel.
-The caller should specify the channel, the data it wants to send,
+sends a message across to the remote processor from the given endpoint.
+The caller should specify the endpoint, the data it wants to send,
 and its length (in bytes). The message will be sent on the specified
-channel, i.e. its source and destination address fields will be
-set to the channel's src and dst addresses.
+endpoint's channel, i.e. its source and destination address fields will be
+respectively set to the endpoint's src address and its parent channel
+dst addresses.
 
 In case there are no TX buffers available, the function will block until
 one becomes available (i.e. until the remote processor consumes
@@ -87,17 +88,18 @@ Returns 0 on success and an appropriate error value on failure.
 
 ::
 
-  int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst);
+  int rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst);
 
-sends a message across to the remote processor on a given channel,
+sends a message across to the remote processor from a given endpoint,
 to a destination address provided by the caller.
 
-The caller should specify the channel, the data it wants to send,
+The caller should specify the endpoint, the data it wants to send,
 its length (in bytes), and an explicit destination address.
 
 The message will then be sent to the remote processor to which the
-channel belongs, using the channel's src address, and the user-provided
-dst address (thus the channel's dst address will be ignored).
+endpoints's channel belongs, using the endpoints's src address,
+and the user-provided dst address (thus the channel's dst address
+will be ignored).
 
 In case there are no TX buffers available, the function will block until
 one becomes available (i.e. until the remote processor consumes
@@ -110,18 +112,19 @@ Returns 0 on success and an appropriate error value on failure.
 
 ::
 
-  int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
+  int rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
 							void *data, int len);
 
 
 sends a message across to the remote processor, using the src and dst
 addresses provided by the user.
 
-The caller should specify the channel, the data it wants to send,
+The caller should specify the endpoint, the data it wants to send,
 its length (in bytes), and explicit source and destination addresses.
 The message will then be sent to the remote processor to which the
-channel belongs, but the channel's src and dst addresses will be
-ignored (and the user-provided addresses will be used instead).
+endpoint's channel belongs, but the endpoint's src and channel dst
+addresses will be ignored (and the user-provided addresses will
+be used instead).
 
 In case there are no TX buffers available, the function will block until
 one becomes available (i.e. until the remote processor consumes
@@ -134,13 +137,14 @@ Returns 0 on success and an appropriate error value on failure.
 
 ::
 
-  int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len);
+  int rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len);
 
-sends a message across to the remote processor on a given channel.
-The caller should specify the channel, the data it wants to send,
+sends a message across to the remote processor from a given endpoint.
+The caller should specify the endpoint, the data it wants to send,
 and its length (in bytes). The message will be sent on the specified
-channel, i.e. its source and destination address fields will be
-set to the channel's src and dst addresses.
+endpoint's channel, i.e. its source and destination address fields will be
+respectively set to the endpoint's src address and its parent channel
+dst addresses.
 
 In case there are no TX buffers available, the function will immediately
 return -ENOMEM without waiting until one becomes available.
@@ -150,10 +154,10 @@ Returns 0 on success and an appropriate error value on failure.
 
 ::
 
-  int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
+  int rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst)
 
 
-sends a message across to the remote processor on a given channel,
+sends a message across to the remote processor from a given endoint,
 to a destination address provided by the user.
 
 The user should specify the channel, the data it wants to send,
@@ -171,7 +175,7 @@ Returns 0 on success and an appropriate error value on failure.
 
 ::
 
-  int rpmsg_trysend_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
+  int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
 							void *data, int len);
 
 
@@ -284,7 +288,7 @@ content to the console.
 	dev_info(&rpdev->dev, "chnl: 0x%x -> 0x%x\n", rpdev->src, rpdev->dst);
 
 	/* send a message on our channel */
-	err = rpmsg_send(rpdev, "hello!", 6);
+	err = rpmsg_send(rpdev->ept, "hello!", 6);
 	if (err) {
 		pr_err("rpmsg_send failed: %d\n", err);
 		return err;
diff --git linux-libre-6.7-gnu/Documentation/staging/tee.rst linux-libre-6.8-gnu/Documentation/staging/tee.rst
deleted file mode 100644
index 22baa077a3b9..000000000000
--- linux-libre-6.7-gnu/Documentation/staging/tee.rst
+++ /dev/null
@@ -1,364 +0,0 @@
-=============
-TEE subsystem
-=============
-
-This document describes the TEE subsystem in Linux.
-
-A TEE (Trusted Execution Environment) is a trusted OS running in some
-secure environment, for example, TrustZone on ARM CPUs, or a separate
-secure co-processor etc. A TEE driver handles the details needed to
-communicate with the TEE.
-
-This subsystem deals with:
-
-- Registration of TEE drivers
-
-- Managing shared memory between Linux and the TEE
-
-- Providing a generic API to the TEE
-
-The TEE interface
-=================
-
-include/uapi/linux/tee.h defines the generic interface to a TEE.
-
-User space (the client) connects to the driver by opening /dev/tee[0-9]* or
-/dev/teepriv[0-9]*.
-
-- TEE_IOC_SHM_ALLOC allocates shared memory and returns a file descriptor
-  which user space can mmap. When user space doesn't need the file
-  descriptor any more, it should be closed. When shared memory isn't needed
-  any longer it should be unmapped with munmap() to allow the reuse of
-  memory.
-
-- TEE_IOC_VERSION lets user space know which TEE this driver handles and
-  its capabilities.
-
-- TEE_IOC_OPEN_SESSION opens a new session to a Trusted Application.
-
-- TEE_IOC_INVOKE invokes a function in a Trusted Application.
-
-- TEE_IOC_CANCEL may cancel an ongoing TEE_IOC_OPEN_SESSION or TEE_IOC_INVOKE.
-
-- TEE_IOC_CLOSE_SESSION closes a session to a Trusted Application.
-
-There are two classes of clients, normal clients and supplicants. The latter is
-a helper process for the TEE to access resources in Linux, for example file
-system access. A normal client opens /dev/tee[0-9]* and a supplicant opens
-/dev/teepriv[0-9].
-
-Much of the communication between clients and the TEE is opaque to the
-driver. The main job for the driver is to receive requests from the
-clients, forward them to the TEE and send back the results. In the case of
-supplicants the communication goes in the other direction, the TEE sends
-requests to the supplicant which then sends back the result.
-
-The TEE kernel interface
-========================
-
-Kernel provides a TEE bus infrastructure where a Trusted Application is
-represented as a device identified via Universally Unique Identifier (UUID) and
-client drivers register a table of supported device UUIDs.
-
-TEE bus infrastructure registers following APIs:
-
-match():
-  iterates over the client driver UUID table to find a corresponding
-  match for device UUID. If a match is found, then this particular device is
-  probed via corresponding probe API registered by the client driver. This
-  process happens whenever a device or a client driver is registered with TEE
-  bus.
-
-uevent():
-  notifies user-space (udev) whenever a new device is registered on
-  TEE bus for auto-loading of modularized client drivers.
-
-TEE bus device enumeration is specific to underlying TEE implementation, so it
-is left open for TEE drivers to provide corresponding implementation.
-
-Then TEE client driver can talk to a matched Trusted Application using APIs
-listed in include/linux/tee_drv.h.
-
-TEE client driver example
--------------------------
-
-Suppose a TEE client driver needs to communicate with a Trusted Application
-having UUID: ``ac6a4085-0e82-4c33-bf98-8eb8e118b6c2``, so driver registration
-snippet would look like::
-
-	static const struct tee_client_device_id client_id_table[] = {
-		{UUID_INIT(0xac6a4085, 0x0e82, 0x4c33,
-			   0xbf, 0x98, 0x8e, 0xb8, 0xe1, 0x18, 0xb6, 0xc2)},
-		{}
-	};
-
-	MODULE_DEVICE_TABLE(tee, client_id_table);
-
-	static struct tee_client_driver client_driver = {
-		.id_table	= client_id_table,
-		.driver		= {
-			.name		= DRIVER_NAME,
-			.bus		= &tee_bus_type,
-			.probe		= client_probe,
-			.remove		= client_remove,
-		},
-	};
-
-	static int __init client_init(void)
-	{
-		return driver_register(&client_driver.driver);
-	}
-
-	static void __exit client_exit(void)
-	{
-		driver_unregister(&client_driver.driver);
-	}
-
-	module_init(client_init);
-	module_exit(client_exit);
-
-OP-TEE driver
-=============
-
-The OP-TEE driver handles OP-TEE [1] based TEEs. Currently it is only the ARM
-TrustZone based OP-TEE solution that is supported.
-
-Lowest level of communication with OP-TEE builds on ARM SMC Calling
-Convention (SMCCC) [2], which is the foundation for OP-TEE's SMC interface
-[3] used internally by the driver. Stacked on top of that is OP-TEE Message
-Protocol [4].
-
-OP-TEE SMC interface provides the basic functions required by SMCCC and some
-additional functions specific for OP-TEE. The most interesting functions are:
-
-- OPTEE_SMC_FUNCID_CALLS_UID (part of SMCCC) returns the version information
-  which is then returned by TEE_IOC_VERSION
-
-- OPTEE_SMC_CALL_GET_OS_UUID returns the particular OP-TEE implementation, used
-  to tell, for instance, a TrustZone OP-TEE apart from an OP-TEE running on a
-  separate secure co-processor.
-
-- OPTEE_SMC_CALL_WITH_ARG drives the OP-TEE message protocol
-
-- OPTEE_SMC_GET_SHM_CONFIG lets the driver and OP-TEE agree on which memory
-  range to used for shared memory between Linux and OP-TEE.
-
-The GlobalPlatform TEE Client API [5] is implemented on top of the generic
-TEE API.
-
-Picture of the relationship between the different components in the
-OP-TEE architecture::
-
-      User space                  Kernel                   Secure world
-      ~~~~~~~~~~                  ~~~~~~                   ~~~~~~~~~~~~
-   +--------+                                             +-------------+
-   | Client |                                             | Trusted     |
-   +--------+                                             | Application |
-      /\                                                  +-------------+
-      || +----------+                                           /\
-      || |tee-      |                                           ||
-      || |supplicant|                                           \/
-      || +----------+                                     +-------------+
-      \/      /\                                          | TEE Internal|
-   +-------+  ||                                          | API         |
-   + TEE   |  ||            +--------+--------+           +-------------+
-   | Client|  ||            | TEE    | OP-TEE |           | OP-TEE      |
-   | API   |  \/            | subsys | driver |           | Trusted OS  |
-   +-------+----------------+----+-------+----+-----------+-------------+
-   |      Generic TEE API        |       |     OP-TEE MSG               |
-   |      IOCTL (TEE_IOC_*)      |       |     SMCCC (OPTEE_SMC_CALL_*) |
-   +-----------------------------+       +------------------------------+
-
-RPC (Remote Procedure Call) are requests from secure world to kernel driver
-or tee-supplicant. An RPC is identified by a special range of SMCCC return
-values from OPTEE_SMC_CALL_WITH_ARG. RPC messages which are intended for the
-kernel are handled by the kernel driver. Other RPC messages will be forwarded to
-tee-supplicant without further involvement of the driver, except switching
-shared memory buffer representation.
-
-OP-TEE device enumeration
--------------------------
-
-OP-TEE provides a pseudo Trusted Application: drivers/tee/optee/device.c in
-order to support device enumeration. In other words, OP-TEE driver invokes this
-application to retrieve a list of Trusted Applications which can be registered
-as devices on the TEE bus.
-
-OP-TEE notifications
---------------------
-
-There are two kinds of notifications that secure world can use to make
-normal world aware of some event.
-
-1. Synchronous notifications delivered with ``OPTEE_RPC_CMD_NOTIFICATION``
-   using the ``OPTEE_RPC_NOTIFICATION_SEND`` parameter.
-2. Asynchronous notifications delivered with a combination of a non-secure
-   edge-triggered interrupt and a fast call from the non-secure interrupt
-   handler.
-
-Synchronous notifications are limited by depending on RPC for delivery,
-this is only usable when secure world is entered with a yielding call via
-``OPTEE_SMC_CALL_WITH_ARG``. This excludes such notifications from secure
-world interrupt handlers.
-
-An asynchronous notification is delivered via a non-secure edge-triggered
-interrupt to an interrupt handler registered in the OP-TEE driver. The
-actual notification value are retrieved with the fast call
-``OPTEE_SMC_GET_ASYNC_NOTIF_VALUE``. Note that one interrupt can represent
-multiple notifications.
-
-One notification value ``OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_BOTTOM_HALF`` has a
-special meaning. When this value is received it means that normal world is
-supposed to make a yielding call ``OPTEE_MSG_CMD_DO_BOTTOM_HALF``. This
-call is done from the thread assisting the interrupt handler. This is a
-building block for OP-TEE OS in secure world to implement the top half and
-bottom half style of device drivers.
-
-OPTEE_INSECURE_LOAD_IMAGE Kconfig option
-----------------------------------------
-
-The OPTEE_INSECURE_LOAD_IMAGE Kconfig option enables the ability to load the
-BL32 OP-TEE image from the kernel after the kernel boots, rather than loading
-it from the firmware before the kernel boots. This also requires enabling the
-corresponding option in Trusted Firmware for Arm. The Trusted Firmware for Arm
-documentation [8] explains the security threat associated with enabling this as
-well as mitigations at the firmware and platform level.
-
-There are additional attack vectors/mitigations for the kernel that should be
-addressed when using this option.
-
-1. Boot chain security.
-
-   * Attack vector: Replace the OP-TEE OS image in the rootfs to gain control of
-     the system.
-
-   * Mitigation: There must be boot chain security that verifies the kernel and
-     rootfs, otherwise an attacker can modify the loaded OP-TEE binary by
-     modifying it in the rootfs.
-
-2. Alternate boot modes.
-
-   * Attack vector: Using an alternate boot mode (i.e. recovery mode), the
-     OP-TEE driver isn't loaded, leaving the SMC hole open.
-
-   * Mitigation: If there are alternate methods of booting the device, such as a
-     recovery mode, it should be ensured that the same mitigations are applied
-     in that mode.
-
-3. Attacks prior to SMC invocation.
-
-   * Attack vector: Code that is executed prior to issuing the SMC call to load
-     OP-TEE can be exploited to then load an alternate OS image.
-
-   * Mitigation: The OP-TEE driver must be loaded before any potential attack
-     vectors are opened up. This should include mounting of any modifiable
-     filesystems, opening of network ports or communicating with external
-     devices (e.g. USB).
-
-4. Blocking SMC call to load OP-TEE.
-
-   * Attack vector: Prevent the driver from being probed, so the SMC call to
-     load OP-TEE isn't executed when desired, leaving it open to being executed
-     later and loading a modified OS.
-
-   * Mitigation: It is recommended to build the OP-TEE driver as builtin driver
-     rather than as a module to prevent exploits that may cause the module to
-     not be loaded.
-
-AMD-TEE driver
-==============
-
-The AMD-TEE driver handles the communication with AMD's TEE environment. The
-TEE environment is provided by AMD Secure Processor.
-
-The AMD Secure Processor (formerly called Platform Security Processor or PSP)
-is a dedicated processor that features ARM TrustZone technology, along with a
-software-based Trusted Execution Environment (TEE) designed to enable
-third-party Trusted Applications. This feature is currently enabled only for
-APUs.
-
-The following picture shows a high level overview of AMD-TEE::
-
-                                             |
-    x86                                      |
-                                             |
- User space            (Kernel space)        |    AMD Secure Processor (PSP)
- ~~~~~~~~~~            ~~~~~~~~~~~~~~        |    ~~~~~~~~~~~~~~~~~~~~~~~~~~
-                                             |
- +--------+                                  |       +-------------+
- | Client |                                  |       | Trusted     |
- +--------+                                  |       | Application |
-     /\                                      |       +-------------+
-     ||                                      |             /\
-     ||                                      |             ||
-     ||                                      |             \/
-     ||                                      |         +----------+
-     ||                                      |         |   TEE    |
-     ||                                      |         | Internal |
-     \/                                      |         |   API    |
- +---------+           +-----------+---------+         +----------+
- | TEE     |           | TEE       | AMD-TEE |         | AMD-TEE  |
- | Client  |           | subsystem | driver  |         | Trusted  |
- | API     |           |           |         |         |   OS     |
- +---------+-----------+----+------+---------+---------+----------+
- |   Generic TEE API        |      | ASP     |      Mailbox       |
- |   IOCTL (TEE_IOC_*)      |      | driver  | Register Protocol  |
- +--------------------------+      +---------+--------------------+
-
-At the lowest level (in x86), the AMD Secure Processor (ASP) driver uses the
-CPU to PSP mailbox register to submit commands to the PSP. The format of the
-command buffer is opaque to the ASP driver. It's role is to submit commands to
-the secure processor and return results to AMD-TEE driver. The interface
-between AMD-TEE driver and AMD Secure Processor driver can be found in [6].
-
-The AMD-TEE driver packages the command buffer payload for processing in TEE.
-The command buffer format for the different TEE commands can be found in [7].
-
-The TEE commands supported by AMD-TEE Trusted OS are:
-
-* TEE_CMD_ID_LOAD_TA          - loads a Trusted Application (TA) binary into
-                                TEE environment.
-* TEE_CMD_ID_UNLOAD_TA        - unloads TA binary from TEE environment.
-* TEE_CMD_ID_OPEN_SESSION     - opens a session with a loaded TA.
-* TEE_CMD_ID_CLOSE_SESSION    - closes session with loaded TA
-* TEE_CMD_ID_INVOKE_CMD       - invokes a command with loaded TA
-* TEE_CMD_ID_MAP_SHARED_MEM   - maps shared memory
-* TEE_CMD_ID_UNMAP_SHARED_MEM - unmaps shared memory
-
-AMD-TEE Trusted OS is the firmware running on AMD Secure Processor.
-
-The AMD-TEE driver registers itself with TEE subsystem and implements the
-following driver function callbacks:
-
-* get_version - returns the driver implementation id and capability.
-* open - sets up the driver context data structure.
-* release - frees up driver resources.
-* open_session - loads the TA binary and opens session with loaded TA.
-* close_session -  closes session with loaded TA and unloads it.
-* invoke_func - invokes a command with loaded TA.
-
-cancel_req driver callback is not supported by AMD-TEE.
-
-The GlobalPlatform TEE Client API [5] can be used by the user space (client) to
-talk to AMD's TEE. AMD's TEE provides a secure environment for loading, opening
-a session, invoking commands and closing session with TA.
-
-References
-==========
-
-[1] https://github.com/OP-TEE/optee_os
-
-[2] http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html
-
-[3] drivers/tee/optee/optee_smc.h
-
-[4] drivers/tee/optee/optee_msg.h
-
-[5] http://www.globalplatform.org/specificationsdevice.asp look for
-    "TEE Client API Specification v1.0" and click download.
-
-[6] include/linux/psp-tee.h
-
-[7] drivers/tee/amdtee/amdtee_if.h
-
-[8] https://trustedfirmware-a.readthedocs.io/en/latest/threat_model/threat_model.html
diff --git linux-libre-6.7-gnu/Documentation/subsystem-apis.rst linux-libre-6.8-gnu/Documentation/subsystem-apis.rst
index 930dc23998a0..2d353fb8ea26 100644
--- linux-libre-6.7-gnu/Documentation/subsystem-apis.rst
+++ linux-libre-6.8-gnu/Documentation/subsystem-apis.rst
@@ -86,3 +86,4 @@ Storage interfaces
    misc-devices/index
    peci/index
    wmi/index
+   tee/index
diff --git linux-libre-6.7-gnu/Documentation/tee/amd-tee.rst linux-libre-6.8-gnu/Documentation/tee/amd-tee.rst
new file mode 100644
index 000000000000..51500fde7038
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/tee/amd-tee.rst
@@ -0,0 +1,90 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================================
+AMD-TEE (AMD's Trusted Execution Environment)
+=============================================
+
+The AMD-TEE driver handles the communication with AMD's TEE environment. The
+TEE environment is provided by AMD Secure Processor.
+
+The AMD Secure Processor (formerly called Platform Security Processor or PSP)
+is a dedicated processor that features ARM TrustZone technology, along with a
+software-based Trusted Execution Environment (TEE) designed to enable
+third-party Trusted Applications. This feature is currently enabled only for
+APUs.
+
+The following picture shows a high level overview of AMD-TEE::
+
+                                             |
+    x86                                      |
+                                             |
+ User space            (Kernel space)        |    AMD Secure Processor (PSP)
+ ~~~~~~~~~~            ~~~~~~~~~~~~~~        |    ~~~~~~~~~~~~~~~~~~~~~~~~~~
+                                             |
+ +--------+                                  |       +-------------+
+ | Client |                                  |       | Trusted     |
+ +--------+                                  |       | Application |
+     /\                                      |       +-------------+
+     ||                                      |             /\
+     ||                                      |             ||
+     ||                                      |             \/
+     ||                                      |         +----------+
+     ||                                      |         |   TEE    |
+     ||                                      |         | Internal |
+     \/                                      |         |   API    |
+ +---------+           +-----------+---------+         +----------+
+ | TEE     |           | TEE       | AMD-TEE |         | AMD-TEE  |
+ | Client  |           | subsystem | driver  |         | Trusted  |
+ | API     |           |           |         |         |   OS     |
+ +---------+-----------+----+------+---------+---------+----------+
+ |   Generic TEE API        |      | ASP     |      Mailbox       |
+ |   IOCTL (TEE_IOC_*)      |      | driver  | Register Protocol  |
+ +--------------------------+      +---------+--------------------+
+
+At the lowest level (in x86), the AMD Secure Processor (ASP) driver uses the
+CPU to PSP mailbox register to submit commands to the PSP. The format of the
+command buffer is opaque to the ASP driver. It's role is to submit commands to
+the secure processor and return results to AMD-TEE driver. The interface
+between AMD-TEE driver and AMD Secure Processor driver can be found in [1].
+
+The AMD-TEE driver packages the command buffer payload for processing in TEE.
+The command buffer format for the different TEE commands can be found in [2].
+
+The TEE commands supported by AMD-TEE Trusted OS are:
+
+* TEE_CMD_ID_LOAD_TA          - loads a Trusted Application (TA) binary into
+                                TEE environment.
+* TEE_CMD_ID_UNLOAD_TA        - unloads TA binary from TEE environment.
+* TEE_CMD_ID_OPEN_SESSION     - opens a session with a loaded TA.
+* TEE_CMD_ID_CLOSE_SESSION    - closes session with loaded TA
+* TEE_CMD_ID_INVOKE_CMD       - invokes a command with loaded TA
+* TEE_CMD_ID_MAP_SHARED_MEM   - maps shared memory
+* TEE_CMD_ID_UNMAP_SHARED_MEM - unmaps shared memory
+
+AMD-TEE Trusted OS is the firmware running on AMD Secure Processor.
+
+The AMD-TEE driver registers itself with TEE subsystem and implements the
+following driver function callbacks:
+
+* get_version - returns the driver implementation id and capability.
+* open - sets up the driver context data structure.
+* release - frees up driver resources.
+* open_session - loads the TA binary and opens session with loaded TA.
+* close_session -  closes session with loaded TA and unloads it.
+* invoke_func - invokes a command with loaded TA.
+
+cancel_req driver callback is not supported by AMD-TEE.
+
+The GlobalPlatform TEE Client API [3] can be used by the user space (client) to
+talk to AMD's TEE. AMD's TEE provides a secure environment for loading, opening
+a session, invoking commands and closing session with TA.
+
+References
+==========
+
+[1] include/linux/psp-tee.h
+
+[2] drivers/tee/amdtee/amdtee_if.h
+
+[3] http://www.globalplatform.org/specificationsdevice.asp look for
+    "TEE Client API Specification v1.0" and click download.
diff --git linux-libre-6.7-gnu/Documentation/tee/index.rst linux-libre-6.8-gnu/Documentation/tee/index.rst
new file mode 100644
index 000000000000..a23bd08847e5
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/tee/index.rst
@@ -0,0 +1,19 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+TEE Subsystem
+=============
+
+.. toctree::
+   :maxdepth: 1
+
+   tee
+   op-tee
+   amd-tee
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git linux-libre-6.7-gnu/Documentation/tee/op-tee.rst linux-libre-6.8-gnu/Documentation/tee/op-tee.rst
new file mode 100644
index 000000000000..b0ac097d5547
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/tee/op-tee.rst
@@ -0,0 +1,166 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================================================
+OP-TEE (Open Portable Trusted Execution Environment)
+====================================================
+
+The OP-TEE driver handles OP-TEE [1] based TEEs. Currently it is only the ARM
+TrustZone based OP-TEE solution that is supported.
+
+Lowest level of communication with OP-TEE builds on ARM SMC Calling
+Convention (SMCCC) [2], which is the foundation for OP-TEE's SMC interface
+[3] used internally by the driver. Stacked on top of that is OP-TEE Message
+Protocol [4].
+
+OP-TEE SMC interface provides the basic functions required by SMCCC and some
+additional functions specific for OP-TEE. The most interesting functions are:
+
+- OPTEE_SMC_FUNCID_CALLS_UID (part of SMCCC) returns the version information
+  which is then returned by TEE_IOC_VERSION
+
+- OPTEE_SMC_CALL_GET_OS_UUID returns the particular OP-TEE implementation, used
+  to tell, for instance, a TrustZone OP-TEE apart from an OP-TEE running on a
+  separate secure co-processor.
+
+- OPTEE_SMC_CALL_WITH_ARG drives the OP-TEE message protocol
+
+- OPTEE_SMC_GET_SHM_CONFIG lets the driver and OP-TEE agree on which memory
+  range to used for shared memory between Linux and OP-TEE.
+
+The GlobalPlatform TEE Client API [5] is implemented on top of the generic
+TEE API.
+
+Picture of the relationship between the different components in the
+OP-TEE architecture::
+
+      User space                  Kernel                   Secure world
+      ~~~~~~~~~~                  ~~~~~~                   ~~~~~~~~~~~~
+   +--------+                                             +-------------+
+   | Client |                                             | Trusted     |
+   +--------+                                             | Application |
+      /\                                                  +-------------+
+      || +----------+                                           /\
+      || |tee-      |                                           ||
+      || |supplicant|                                           \/
+      || +----------+                                     +-------------+
+      \/      /\                                          | TEE Internal|
+   +-------+  ||                                          | API         |
+   + TEE   |  ||            +--------+--------+           +-------------+
+   | Client|  ||            | TEE    | OP-TEE |           | OP-TEE      |
+   | API   |  \/            | subsys | driver |           | Trusted OS  |
+   +-------+----------------+----+-------+----+-----------+-------------+
+   |      Generic TEE API        |       |     OP-TEE MSG               |
+   |      IOCTL (TEE_IOC_*)      |       |     SMCCC (OPTEE_SMC_CALL_*) |
+   +-----------------------------+       +------------------------------+
+
+RPC (Remote Procedure Call) are requests from secure world to kernel driver
+or tee-supplicant. An RPC is identified by a special range of SMCCC return
+values from OPTEE_SMC_CALL_WITH_ARG. RPC messages which are intended for the
+kernel are handled by the kernel driver. Other RPC messages will be forwarded to
+tee-supplicant without further involvement of the driver, except switching
+shared memory buffer representation.
+
+OP-TEE device enumeration
+-------------------------
+
+OP-TEE provides a pseudo Trusted Application: drivers/tee/optee/device.c in
+order to support device enumeration. In other words, OP-TEE driver invokes this
+application to retrieve a list of Trusted Applications which can be registered
+as devices on the TEE bus.
+
+OP-TEE notifications
+--------------------
+
+There are two kinds of notifications that secure world can use to make
+normal world aware of some event.
+
+1. Synchronous notifications delivered with ``OPTEE_RPC_CMD_NOTIFICATION``
+   using the ``OPTEE_RPC_NOTIFICATION_SEND`` parameter.
+2. Asynchronous notifications delivered with a combination of a non-secure
+   edge-triggered interrupt and a fast call from the non-secure interrupt
+   handler.
+
+Synchronous notifications are limited by depending on RPC for delivery,
+this is only usable when secure world is entered with a yielding call via
+``OPTEE_SMC_CALL_WITH_ARG``. This excludes such notifications from secure
+world interrupt handlers.
+
+An asynchronous notification is delivered via a non-secure edge-triggered
+interrupt to an interrupt handler registered in the OP-TEE driver. The
+actual notification value are retrieved with the fast call
+``OPTEE_SMC_GET_ASYNC_NOTIF_VALUE``. Note that one interrupt can represent
+multiple notifications.
+
+One notification value ``OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_BOTTOM_HALF`` has a
+special meaning. When this value is received it means that normal world is
+supposed to make a yielding call ``OPTEE_MSG_CMD_DO_BOTTOM_HALF``. This
+call is done from the thread assisting the interrupt handler. This is a
+building block for OP-TEE OS in secure world to implement the top half and
+bottom half style of device drivers.
+
+OPTEE_INSECURE_LOAD_IMAGE Kconfig option
+----------------------------------------
+
+The OPTEE_INSECURE_LOAD_IMAGE Kconfig option enables the ability to load the
+BL32 OP-TEE image from the kernel after the kernel boots, rather than loading
+it from the firmware before the kernel boots. This also requires enabling the
+corresponding option in Trusted Firmware for Arm. The Trusted Firmware for Arm
+documentation [6] explains the security threat associated with enabling this as
+well as mitigations at the firmware and platform level.
+
+There are additional attack vectors/mitigations for the kernel that should be
+addressed when using this option.
+
+1. Boot chain security.
+
+   * Attack vector: Replace the OP-TEE OS image in the rootfs to gain control of
+     the system.
+
+   * Mitigation: There must be boot chain security that verifies the kernel and
+     rootfs, otherwise an attacker can modify the loaded OP-TEE binary by
+     modifying it in the rootfs.
+
+2. Alternate boot modes.
+
+   * Attack vector: Using an alternate boot mode (i.e. recovery mode), the
+     OP-TEE driver isn't loaded, leaving the SMC hole open.
+
+   * Mitigation: If there are alternate methods of booting the device, such as a
+     recovery mode, it should be ensured that the same mitigations are applied
+     in that mode.
+
+3. Attacks prior to SMC invocation.
+
+   * Attack vector: Code that is executed prior to issuing the SMC call to load
+     OP-TEE can be exploited to then load an alternate OS image.
+
+   * Mitigation: The OP-TEE driver must be loaded before any potential attack
+     vectors are opened up. This should include mounting of any modifiable
+     filesystems, opening of network ports or communicating with external
+     devices (e.g. USB).
+
+4. Blocking SMC call to load OP-TEE.
+
+   * Attack vector: Prevent the driver from being probed, so the SMC call to
+     load OP-TEE isn't executed when desired, leaving it open to being executed
+     later and loading a modified OS.
+
+   * Mitigation: It is recommended to build the OP-TEE driver as builtin driver
+     rather than as a module to prevent exploits that may cause the module to
+     not be loaded.
+
+References
+==========
+
+[1] https://github.com/OP-TEE/optee_os
+
+[2] http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html
+
+[3] drivers/tee/optee/optee_smc.h
+
+[4] drivers/tee/optee/optee_msg.h
+
+[5] http://www.globalplatform.org/specificationsdevice.asp look for
+    "TEE Client API Specification v1.0" and click download.
+
+[6] https://trustedfirmware-a.readthedocs.io/en/latest/threat_model/threat_model.html
diff --git linux-libre-6.7-gnu/Documentation/tee/tee.rst linux-libre-6.8-gnu/Documentation/tee/tee.rst
new file mode 100644
index 000000000000..fd9f8c4ff63d
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/tee/tee.rst
@@ -0,0 +1,22 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+TEE (Trusted Execution Environment)
+===================================
+
+This document describes the TEE subsystem in Linux.
+
+Overview
+========
+
+A TEE is a trusted OS running in some secure environment, for example,
+TrustZone on ARM CPUs, or a separate secure co-processor etc. A TEE driver
+handles the details needed to communicate with the TEE.
+
+This subsystem deals with:
+
+- Registration of TEE drivers
+
+- Managing shared memory between Linux and the TEE
+
+- Providing a generic API to the TEE
diff --git linux-libre-6.7-gnu/Documentation/trace/coresight/coresight.rst linux-libre-6.8-gnu/Documentation/trace/coresight/coresight.rst
index 826e59a698da..d4f93d6a2d63 100644
--- linux-libre-6.7-gnu/Documentation/trace/coresight/coresight.rst
+++ linux-libre-6.8-gnu/Documentation/trace/coresight/coresight.rst
@@ -624,6 +624,10 @@ They are also listed in the folder /sys/bus/event_source/devices/cs_etm/format/
    * - timestamp
      - Session local version of the system wide setting: :ref:`ETMv4_MODE_TIMESTAMP
        <coresight-timestamp>`
+   * - cc_threshold
+     - Cycle count threshold value. If nothing is provided here or the provided value is 0, then the
+       default value i.e 0x100 will be used. If provided value is less than minimum cycles threshold
+       value, as indicated via TRCIDR3.CCITMIN, then the minimum value will be used instead.
 
 How to use the STM module
 -------------------------
diff --git linux-libre-6.7-gnu/Documentation/trace/ftrace-uses.rst linux-libre-6.8-gnu/Documentation/trace/ftrace-uses.rst
index f7d98ae5b885..e198854ace79 100644
--- linux-libre-6.7-gnu/Documentation/trace/ftrace-uses.rst
+++ linux-libre-6.8-gnu/Documentation/trace/ftrace-uses.rst
@@ -182,7 +182,7 @@ FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED
 
 FTRACE_OPS_FL_RECURSION
 	By default, it is expected that the callback can handle recursion.
-	But if the callback is not that worried about overehead, then
+	But if the callback is not that worried about overhead, then
 	setting this bit will add the recursion protection around the
 	callback by calling a helper function that will do the recursion
 	protection and only call the callback if it did not recurse.
@@ -190,7 +190,7 @@ FTRACE_OPS_FL_RECURSION
 	Note, if this flag is not set, and recursion does occur, it could
 	cause the system to crash, and possibly reboot via a triple fault.
 
-	Not, if this flag is set, then the callback will always be called
+	Note, if this flag is set, then the callback will always be called
 	with preemption disabled. If it is not set, then it is possible
 	(but not guaranteed) that the callback will be called in
 	preemptable context.
diff --git linux-libre-6.7-gnu/Documentation/trace/ftrace.rst linux-libre-6.8-gnu/Documentation/trace/ftrace.rst
index 23572f6697c0..7e7b8ec17934 100644
--- linux-libre-6.7-gnu/Documentation/trace/ftrace.rst
+++ linux-libre-6.8-gnu/Documentation/trace/ftrace.rst
@@ -180,6 +180,21 @@ of ftrace. Here is a list of some of the key files:
 	Only active when the file contains a number greater than 0.
 	(in microseconds)
 
+  buffer_percent:
+
+	This is the watermark for how much the ring buffer needs to be filled
+	before a waiter is woken up. That is, if an application calls a
+	blocking read syscall on one of the per_cpu trace_pipe_raw files, it
+	will block until the given amount of data specified by buffer_percent
+	is in the ring buffer before it wakes the reader up. This also
+	controls how the splice system calls are blocked on this file::
+
+	  0   - means to wake up as soon as there is any data in the ring buffer.
+	  50  - means to wake up when roughly half of the ring buffer sub-buffers
+	        are full.
+	  100 - means to block until the ring buffer is totally full and is
+	        about to start overwriting the older data.
+
   buffer_size_kb:
 
 	This sets or displays the number of kilobytes each CPU
@@ -203,6 +218,27 @@ of ftrace. Here is a list of some of the key files:
 
 	This displays the total combined size of all the trace buffers.
 
+  buffer_subbuf_size_kb:
+
+	This sets or displays the sub buffer size. The ring buffer is broken up
+	into several same size "sub buffers". An event can not be bigger than
+	the size of the sub buffer. Normally, the sub buffer is the size of the
+	architecture's page (4K on x86). The sub buffer also contains meta data
+	at the start which also limits the size of an event.  That means when
+	the sub buffer is a page size, no event can be larger than the page
+	size minus the sub buffer meta data.
+
+	Note, the buffer_subbuf_size_kb is a way for the user to specify the
+	minimum size of the subbuffer. The kernel may make it bigger due to the
+	implementation details, or simply fail the operation if the kernel can
+	not handle the request.
+
+	Changing the sub buffer size allows for events to be larger than the
+	page size.
+
+	Note: When changing the sub-buffer size, tracing is stopped and any
+	data in the ring buffer and the snapshot buffer will be discarded.
+
   free_buffer:
 
 	If a process is performing tracing, and the ring buffer	should be
@@ -2574,7 +2610,7 @@ want, depending on your needs.
 
 - The cpu number on which the function executed is default
   enabled.  It is sometimes better to only trace one cpu (see
-  tracing_cpu_mask file) or you might sometimes see unordered
+  tracing_cpumask file) or you might sometimes see unordered
   function calls while cpu tracing switch.
 
 	- hide: echo nofuncgraph-cpu > trace_options
diff --git linux-libre-6.7-gnu/Documentation/trace/kprobes.rst linux-libre-6.8-gnu/Documentation/trace/kprobes.rst
index f825970a1495..e1636e579c9c 100644
--- linux-libre-6.7-gnu/Documentation/trace/kprobes.rst
+++ linux-libre-6.8-gnu/Documentation/trace/kprobes.rst
@@ -4,7 +4,7 @@ Kernel Probes (Kprobes)
 
 :Author: Jim Keniston <jkenisto@us.ibm.com>
 :Author: Prasanna S Panchamukhi <prasanna.panchamukhi@gmail.com>
-:Author: Masami Hiramatsu <mhiramat@redhat.com>
+:Author: Masami Hiramatsu <mhiramat@kernel.org>
 
 .. CONTENTS
 
@@ -321,6 +321,7 @@ architectures:
 - mips
 - s390
 - parisc
+- loongarch
 
 Configuring Kprobes
 ===================
diff --git linux-libre-6.7-gnu/Documentation/translations/it_IT/process/development-process.rst linux-libre-6.8-gnu/Documentation/translations/it_IT/process/development-process.rst
index f1a6eca30824..20e77c9816a1 100644
--- linux-libre-6.7-gnu/Documentation/translations/it_IT/process/development-process.rst
+++ linux-libre-6.8-gnu/Documentation/translations/it_IT/process/development-process.rst
@@ -8,9 +8,17 @@
 Una guida al processo di sviluppo del Kernel
 ============================================
 
-Contenuti:
+Lo scopo di questo documento è quello di aiutare gli sviluppatori (ed i loro
+supervisori) a lavorare con la communità di sviluppo con il minimo sforzo. È
+un tentativo di documentare il funzionamento di questa communità in modo che
+sia accessibile anche a coloro che non hanno famigliarità con lo sviluppo del
+Kernel Linux (o, anzi, con lo sviluppo di software libero in generale).  Benchè
+qui sia presente del materiale tecnico, questa è una discussione rivolta in
+particolare al procedimento, e quindi per essere compreso non richiede una
+conoscenza approfondità sullo sviluppo del kernel.
 
 .. toctree::
+   :caption: Contenuti
    :numbered:
    :maxdepth: 2
 
@@ -22,12 +30,3 @@ Contenuti:
    6.Followthrough
    7.AdvancedTopics
    8.Conclusion
-
-Lo scopo di questo documento è quello di aiutare gli sviluppatori (ed i loro
-supervisori) a lavorare con la communità di sviluppo con il minimo sforzo. È
-un tentativo di documentare il funzionamento di questa communità in modo che
-sia accessibile anche a coloro che non hanno famigliarità con lo sviluppo del
-Kernel Linux (o, anzi, con lo sviluppo di software libero in generale).  Benchè
-qui sia presente del materiale tecnico, questa è una discussione rivolta in
-particolare al procedimento, e quindi per essere compreso non richiede una
-conoscenza approfondità sullo sviluppo del kernel.
diff --git linux-libre-6.7-gnu/Documentation/translations/ja_JP/SubmitChecklist linux-libre-6.8-gnu/Documentation/translations/ja_JP/SubmitChecklist
index 4429447b0965..1759c6b452d6 100644
--- linux-libre-6.7-gnu/Documentation/translations/ja_JP/SubmitChecklist
+++ linux-libre-6.8-gnu/Documentation/translations/ja_JP/SubmitChecklist
@@ -56,8 +56,8 @@ Linux カーネルパッチ投稿者向けチェックリスト
 
  9: sparseを利用してちゃんとしたコードチェックをしてください。
 
-10: 'make checkstack' と 'make namespacecheck' を利用し、問題が発見されたら
-    修正してください。'make checkstack' は明示的に問題を示しませんが、どれか
+10: 'make checkstack' を利用し、問題が発見されたら修正してください。
+    'make checkstack' は明示的に問題を示しませんが、どれか
     １つの関数が512バイトより大きいスタックを使っていれば、修正すべき候補と
     なります。
 
diff --git linux-libre-6.7-gnu/Documentation/translations/sp_SP/disclaimer-sp.rst linux-libre-6.8-gnu/Documentation/translations/sp_SP/disclaimer-sp.rst
index a400034e95f9..841c2523e3dd 100644
--- linux-libre-6.7-gnu/Documentation/translations/sp_SP/disclaimer-sp.rst
+++ linux-libre-6.8-gnu/Documentation/translations/sp_SP/disclaimer-sp.rst
@@ -4,3 +4,6 @@
    Si tiene alguna duda sobre la exactitud del contenido de esta
    traducción, la única referencia válida es la documentación oficial en
    inglés.
+   Además, por defecto, los enlaces a documentos redirigen a la
+   documentación en inglés, incluso si existe una versión traducida.
+   Consulte el índice para más información.
diff --git linux-libre-6.7-gnu/Documentation/translations/sp_SP/index.rst linux-libre-6.8-gnu/Documentation/translations/sp_SP/index.rst
index 5c2a2131524b..c543b495c042 100644
--- linux-libre-6.7-gnu/Documentation/translations/sp_SP/index.rst
+++ linux-libre-6.8-gnu/Documentation/translations/sp_SP/index.rst
@@ -76,6 +76,5 @@ Traducciones al español
 .. toctree::
    :maxdepth: 1
 
-   howto
    process/index
    wrappers/memory-barriers
diff --git linux-libre-6.7-gnu/Documentation/translations/sp_SP/process/handling-regressions.rst linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/handling-regressions.rst
new file mode 100644
index 000000000000..aa0988985c55
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/handling-regressions.rst
@@ -0,0 +1,797 @@
+.. include:: ../disclaimer-sp.rst
+
+:Translator: Sergio González Collado <sergio.collado@gmail.com>
+
+.. _sp_handling_regressions:
+
+Gestión de regresiones
+++++++++++++++++++++++
+
+*No causamos regresiones* -- este documento describe la que es la "primera
+regla del desarrollo del kernel de Linux" y que implica en la práctica para
+los desarrolladores. Y complementa la documentación:
+Documentation/admin-guide/reporting-regressions.rst, que cubre el tema
+desde el punto de vista de un usuario; si nunca ha leído ese texto, realice
+al menos una lectura rápida del mismo antes de continuar.
+
+Las partes importantes (el "TL;DR")
+===================================
+
+#.  Asegúrese de que los suscriptores a la lista `regression mailing list
+    <https://lore.kernel.org/regressions/>`_ (regressions@lists.linux.dev)
+    son conocedores con rapidez de cualquier nuevo informe de regresión:
+
+    * Cuando se reciba un correo que no incluyó a la lista, inclúyalo en la
+      conversación de los correos, mandando un breve "Reply-all" con la
+      lista en CCed.
+
+    * Mande o redirija cualquier informe originado en los gestores de bugs
+      a la lista.
+
+#. Haga que el bot del kernel de Linux "regzbot" realice el seguimiento del
+   incidente (esto es opcional, pero recomendado).
+
+    * Para reportes enviados por correo, verificar si contiene alguna línea
+      como ``#regzbot introduced v5.13..v5.14-rc1``. Si no, mandar una
+      respuesta (con la lista de regresiones en CC) que contenga un párrafo
+      como el siguiente, lo que le indica a regzbot cuando empezó a suceder
+      el incidente::
+
+       #regzbot ^introduced 1f2e3d4c5b6a
+
+    * Cuando se mandan informes desde un gestor de incidentes a la lista de
+      regresiones(ver más arriba), incluir un párrafo como el siguiente::
+
+       #regzbot introduced: v5.13..v5.14-rc1
+       #regzbot from: Some N. Ice Human <some.human@example.com>
+       #regzbot monitor: http://some.bugtracker.example.com/ticket?id=123456789
+
+#. Cuando se manden correcciones para las regresiones, añadir etiquetas
+   "Link:" a la descripción, apuntado a todos los sitios donde se informó
+   del incidente, como se indica en el documento:
+   Documentation/process/submitting-patches.rst y
+   :ref:`Documentation/process/5.Posting.rst <development_posting>`.
+
+#. Intente arreglar las regresiones rápidamente una vez la causa haya sido
+   identificada; las correcciones para la mayor parte de las regresiones
+   deberían ser integradas en menos de dos semanas, pero algunas pueden
+   resolverse en dos o tres días.
+
+Detalles importantes para desarrolladores en la regresiones de kernel de Linux
+==============================================================================
+
+Puntos básicos importantes más en detalle
+-----------------------------------------
+
+Qué hacer cuando se recibe un aviso de regresión.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Asegúrese de que el programa de gestión de regresiones del kernel de Linux
+y los subscritos a la lista de correo `regression mailing list
+<https://lore.kernel.org/regressions/>`_ (regressions@lists.linux.dev) son
+conocedores de cualquier nuevo informe de regresión:
+
+ * Cuando se recibe un informe por email que no tiene en CC la lista,
+   inmediatamente meterla en el la cadena de emails mandado al menos un
+   breve "Reply-all" con la lista en CC; Intentar asegurar que la lista es
+   añadida en CC de nuevo en caso de que alguna respuesta la omita de la
+   lista.
+
+ * Si un informe enviado a un gestor de defectos, llega a su correo,
+   reenvíelo o redirijalo a la lista. Considere verificar los archivos de
+   la lista de antemano, si la persona que lo ha informado, lo ha enviado
+   anteriormente, como se indica en:
+   Documentation/admin-guide/reporting-issues.rst.
+
+Cuando se realice cualquiera de las acciones anteriores, considere
+inmediatamente iniciar el seguimiento de la regresión con "regzbot" el
+gestor de regresiones del kernel de Linux.
+
+ * Para los informes enviados por email, verificar si se ha incluido un
+   comando a "regzbot", como ``#regzbot introduced 1f2e3d4c5b6a``. Si no es
+   así, envíe una respuesta (con la lista de regresiones en CC) con un
+   párrafo como el siguiente::
+
+       #regzbot ^introduced: v5.13..v5.14-rc1
+
+   Esto indica a regzbot el rango de versiones en el cual es defecto
+   comenzó a suceder; Puede especificar un rango usando los identificadores
+   de los commits así como un único commit, en caso en el que el informante
+   haya identificado el commit causante con 'bisect'.
+
+   Tenga en cuenta que el acento circunflejo (^) antes de "introduced":
+   Esto indica a regzbot, que debe tratar el email padre (el que ha sido
+   respondido) como el informeinicial para la regresión que quiere ser
+   seguida. Esto es importante, ya que regzbot buscará más tarde parches
+   con etiquetas "Link:" que apunten al al informe de losarchivos de
+   lore.kernel.org.
+
+ * Cuando mande informes de regresiones a un gestor de defectos, incluya un
+   párrafo con los siguientes comandos a regzbot::
+
+       #regzbot introduced: 1f2e3d4c5b6a
+       #regzbot from: Some N. Ice Human <some.human@example.com>
+       #regzbot monitor: http://some.bugtracker.example.com/ticket?id=123456789
+
+   Regzbot asociará automáticamente parches con el informe que contengan
+   las etiquetas "Link:" apuntando a su email o el ticket indicado.
+
+Qué es importante cuando se corrigen regresiones
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+No se necesita hacer nada especial cuando se mandan las correcciones para
+las regresiones únicamente recordar lo que se explica en los documentos:
+Documentation/process/submitting-patches.rst,
+:ref:`Documentation/process/5.Posting.rst <development_posting>`, y
+Documentation/process/stable-kernel-rules.rst
+
+ * Apunte a todos los lugares donde el incidente se reportó usando la
+   etiqueta "Link:" ::
+
+       Link: https://lore.kernel.org/r/30th.anniversary.repost@klaava.Helsinki.FI/
+       Link: https://bugzilla.kernel.org/show_bug.cgi?id=1234567890
+
+ * Añada la etiqueta "Fixes:" para indicar el commit causante de la
+   regresión.
+
+ * Si el culpable ha sido "mergeado" en un ciclo de desarrollo anterior,
+   marque explícitamente el fix para retro-importarlo usando la etiqueta
+   ``Cc: stable@vger.kernel.org`` tag.
+
+Todo esto se espera y es importante en una regresión, ya que estas
+etiquetas son de gran valor para todos (incluido usted) que pueda estar
+mirando en ese incidente semanas, meses o años después. Estas etiquetas son
+también cruciales para las herramientas y scripts usados por otros
+desarrolladores del kernel o distribuciones de Linux; una de esas
+herramientas es regzbot, el cual depende mucho de las etiquetas "Link:"
+para asociar los informes por regresiones con los cambios que las
+resuelven.
+
+
+Priorización del trabajo en arreglar regresiones
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Al final, los desarrolladores deberían hacer lo posible para evitar a los
+usuarios situaciones donde una regresión les deje solo tres opciones:
+
+ * Ejecutar el kernel con una regresión que afecta seriamente al uso.
+
+ * Cambiar a un kernel nuevo o mas antiguo -- rebajarse a una versión
+   soportada del kernel que no tenga las funcionalidades requeridas.
+
+ * Continuar ejecutando una versión desfasada y potencialmente insegura del
+   kernel por más de dos semanas después de que el causante de una regresión
+   fuese identificado.
+
+Cómo se ejecuta esto depende mucho de la situación. A continuación se
+presentan unas reglas generales, en orden de importancia:
+
+ * Priorice el trabajo en la gestión de los informes de la regresión y
+   arreglar la regresión por encima de cualquier otro trabajo en el kernel
+   de Linux, a menos que lo último afecte profundamente a efectos de
+   seguridad, o cause errores en los que haya pérdida o daño de datos.
+
+ * Considere siempre revertir los commits responsables y re-aplicarlos
+   después, junto con las correcciones necesarias, ya que esto puede la
+   forma menos peligrosa y más rápida de arreglar la regresión.
+
+ * Los desarrolladores deberían gestionar la regresión en todos los kernels
+   soportados de la serie, pero son libres de delegar el trabajo al equipo
+   permanente el incidente no hubiese ocurrido en la línea principal.
+
+ * Intente resolver cualquier regresión que apareciera en el ciclo de
+   desarrollo antes de que este acabe. Si se teme que una corrección
+   pudiera ser demasiado arriesgada para aplicarla días antes de una
+   liberación de la línea principal de desarrollo, dejar decidir a Linus:
+   mande la corrección a él de forma separada, tan pronto como sea posible
+   con una explicación de la situación. El podrá decidir, y posponer la
+   liberación si fuese necesario, por ejemplo si aparecieran múltiples
+   cambios como ese.
+
+ * Gestione las regresiones en la rama estable, de largo término, o la
+   propia rama principal de las versiones, con más urgencia que la
+   regresiones en las preliberaciones. Esto cambia después de la liberación
+   de la quinta pre-liberación, aka "-rc5": la rama principal entonces se
+   vuelve más importante, asegurar que todas las mejoras y correcciones son
+   idealmente testeados juntos por al menos una semana antes de que Linux
+   libere la nueva versión en la rama principal.
+
+ * Intente arreglar regresiones en un intervalo de una semana después de
+   que se ha identificado el responsable, si el incidente fue introducido
+   en alguno de los siguientes casos:
+
+    * una versión estable/largo-plazo reciente
+
+    * en el último ciclo de desarrollo de la rama principal
+
+   En el último caso (por ejemplo v5.14), intentar gestionar las
+   regresiones incluso más rápido, si la versión estable precedente (v5.13)
+   ha de ser abandonada pronto o ya se ha etiquetado como de final de vida
+   (EOL de las siglas en inglés End-of-Life) -- esto sucede usualmente
+   sobre tres o cuatro semanas después de una liberación de una versión en
+   la rama principal.
+
+ * Intente arreglar cualquier otra regresión en un periodo de dos semanas
+   después de que el culpable haya sido identificado. Dos o tres semanas
+   adicionales son aceptables para regresiones de rendimiento y otros
+   incidentes que son molestos, pero no bloquean a nadie la ejecución de
+   Linux (a menos que se un incidente en el ciclo de desarrollo actual, en
+   ese caso se debería gestionar antes de la liberación de la versión).
+   Unas semanas son aceptables si la regresión únicamente puede ser
+   arreglada con un cambio arriesgado y al mismo tiempo únicamente afecta a
+   unos pocos usuarios; también está bien si se usa tanto tiempo como fuera
+   necesario si la regresión está presente en la segunda versión más nueva
+   de largo plazo del kernel.
+
+Nota: Los intervalos de tiempo mencionados anteriormente para la resolución
+de las regresiones, incluyen la verificación de esta, revisión e inclusión
+en la rama principal, idealmente con la corrección incluida en la rama
+"linux-next" al menos brevemente. Esto conllevará retrasos que también se
+tienen tener en cuenta.
+
+Se espera que los maintainers de los subsistemas, ayuden en conseguir esos
+tiempos, haciendo revisiones con prontitud y gestionando con rapidez los
+parches aceptados. Esto puede resultar en tener que mandar peticiones de
+git-pull antes o de forma más frecuente que lo normal; dependiendo del
+arreglo, podría incluso ser aceptable saltarse la verificación en
+linux-next. Especialmente para las correcciones en las ramas de los kernels
+estable y de largo plazo necesitan ser gestionadas rápidamente, y las
+correcciones necesitan ser incluidas en la rama principal antes de que
+puedan ser incluidas posteriormente a las series precedentes.
+
+
+Más aspectos sobre regresiones que los desarrolladores deben saber
+------------------------------------------------------------------
+
+Cómo tratar con cambios donde se sabe que hay riesgo de regresión
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Evalué cómo de grande es el riesgo de una regresión, por ejemplo realizando
+una búsqueda en las distribuciones de linux y en Git forges. Considere
+también preguntar a otros desarrolladores o proyectos que pudieran ser
+afectados para evaluar o incluso testear el cambio propuesto; si
+apareciesen problemas, quizás se pudiera encontrar una solución aceptable
+para todos.
+
+Si al final, el riesgo de la regresión parece ser relativamente pequeño,
+entonces adelante con el cambio, pero siempre informe a todas las partes
+involucradas del posible riesgo. Por tanto, asegúrese de que la descripción
+del parche, se hace explícito este hecho. Una vez el cambio ha sido
+integrado, informe al gestor de regresiones de Linux y a las listas de
+correo de regresiones sobre el riesgo, de manera que cualquiera que tenga
+el cambio en el radar, en el caso de que aparezcan reportes. Dependiendo
+del riesgo, quizás se quiera preguntar al mantenedor del subsistema, que
+mencione el hecho en su línea principal de desarrollo.
+
+¿Qué más hay que saber sobre regresiones?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Repase la documentación: Documentation/admin-guide/reporting-regressions.rst,
+esta cubre otros aspectos a tener a en cuenta y conocer:
+
+ * la finalidad de la "regla de no regresión"
+
+ * qué incidencias no se califican como regresión
+
+ * quién es el responsable de identificar la causa raíz de una regresión
+
+ * cómo gestionar situaciones difíciles, como por ejemplo cuando una
+   regresión es causada por una corrección de seguridad o cuando una
+   regresión causa otra regresión
+
+A quién preguntar por consejo cuando se trata de regresiones
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Mande un email a la lista de correo de regresiones
+(regressions@lists.linux.dev) y CC al seguidor de regresiones del kernel de
+Linux (regressions@leemhuis.info); Si el incidente pudiera ser mejor
+gestionarlo en privado, puede omitirse la lista.
+
+
+Más sobre la gestión de regresiones con regzbot
+-----------------------------------------------
+
+¿Por qué el kernel de Linux tiene un gestor de regresiones, y por qué se usa regzbot?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Reglas como "no regresiones" necesitan asegurar que se cumplen, de otro
+modo se romperían accidentalmente o a propósito. La historia ha mostrado
+que esto es verdad también para el kernel de Linux. Esto es por lo que
+Thorsten Leemhuis se ofreció como voluntario para dar una solución a esto,
+con el gestor de regresiones del kernel de Linux. A nadie se le paga por
+hacer esto, y esa es la razón por la gestión de regresiones es un servicio
+con el "mejor esfuerzo".
+
+Intentos iniciales de gestionar manualmente las regresiones han demostrado
+que es una tarea extenuante y frustrante, y por esa razón se dejaron de
+hacer después de un tiempo. Para evitar que volviese a suceder esto,
+Thorsten desarrollo regbot para facilitar el trabajo, con el objetivo a
+largo plazo de automatizar la gestión de regresiones tanto como fuese
+posible para cualquiera que estuviese involucrado.
+
+¿Cómo funciona el seguimiento de regresiones con regzbot?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+El bot monitoriza las respuestas de los informes de las regresiones
+identificadas. Adicionalmente mira si se han publicado o enviado parches
+que hagan referencia a esos informes con la etiqueta: "Link:"; respuestas a
+esos parches también se siguen. Combinando esta información, también
+proporciona una buena imagen del estado actual del proceso de corrección.
+
+Regzbot intenta hacer todo este trabajo con tan poco retraso como sea
+posible tanto para la gente que lo reporta, como para los desarrolladores.
+De hecho, solo los informantes son requeridos para una tarea adicional:
+necesitan informar a regzbot con el comando ``#regzbot introduced``
+indicado anteriormente; si no hacen esto, alguien más puede hacerlo usando
+``#regzbot ^introduced``.
+
+Para los desarrolladores normalmente no hay un trabajo adicional que
+realizar, únicamente necesitan asegurarse una cosa, que ya se hacía mucho
+antes de que regzbot apareciera: añadir las etiquetas "Link:" a la
+descripción del parche apuntando a todos los informes sobre el error
+corregido.
+
+¿Tengo que usar regzbot?
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Hacerlo es por el bien de todo el mundo, tanto los mantenedores del kernel,
+como Linus Torvalds dependen parcialmente en regzbot para seguir su trabajo
+-- por ejemplo cuando deciden liberar una nueva versión o ampliar la fase de
+desarrollo. Para esto necesitan conocer todas las regresiones que están sin
+corregir; para esto, es conocido que Linux mira los informes semanales que
+manda regzbot.
+
+¿He de informar a regzbot cada regresión que encuentre?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Idealmente, sí: todos somos humanos y olvidamos fácilmente los problemas
+cuando algo más importante aparece inesperadamente -- por ejemplo un
+problema mayor en el kernel de Linux o algo en la vida real que nos mantenga
+alejados de los teclados por un tiempo. Por eso es mejor informar a regzbot
+sobre cada regresión, excepto cuando inmediatamente escribimos un parche y
+los mandamos al árbol de desarrollo en el que se integran habitualmente a
+la serie del kernel.
+
+¿Cómo ver qué regresiones esta siguiendo regbot actualmente?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Verifique el `interfaz web de regzbot <https://linux-regtracking.leemhuis.info/regzbot/>`_
+para ver la última información; o `busque el último informe de regresiones
+<https://lore.kernel.org/lkml/?q=%22Linux+regressions+report%22+f%3Aregzbot>`_,
+el cual suele ser enviado por regzbot una vez a la semana el domingo por la
+noche (UTC), lo cual es unas horas antes de que Linus normalmente anuncie
+las "(pre-)releases".
+
+¿Qué sitios supervisa regzbot?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Regzbot supervisa las listas de correo más importantes de Linux, como
+también las de los repositorios linux-next, mainline y stable/longterm.
+
+
+¿Qué tipos de incidentes han de ser monitorizados por regzbot?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+El bot debe hacer seguimiento de las regresiones, y por tanto por favor,
+no involucre a regzbot para incidencias normales. Pero es correcto para
+el gestor de incidencias de kernel de Linux, monitorizar incidentes
+graves, como informes sobre cuelgues, corrupción de datos o errores
+internos (Panic, Oops, BUG(), warning, ...).
+
+
+¿Puedo añadir una regresión detectada por un sistema de CI al seguimiento de regzbot?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Siéntase libre de hacerlo, si la regresión en concreto puede tener un
+impacto en casos de uso prácticos y por tanto ser detectado por los usuarios;
+Así, por favor no involucre a regzbot en regresiones teóricas que
+difícilmente pudieran manifestarse en un uso real.
+
+¿Cómo interactuar con regzbot?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Usando el comando 'regzbot' en una respuesta directa o indirecta al correo
+con el informe de regresión. Ese comando necesita estar en su propio
+párrafo (debe estar separado del resto del texto usando líneas en blanco):
+
+Por ejemplo ``#regzbot introduced <version or commit>``, que hace que regzbot
+considere el correo como un informe de regressión que se ha de añadir al
+seguimiento, como se ha descrito anteriormente; ``#regzbot ^introduced <version or commit>``
+es otro ejemplo del comando, el cual indica a regzbot que considere el email
+anterior como el informe de una regresión que se ha de comenzar a monitorizar.
+
+Una vez uno de esos dos comandos se ha utilizado, se pueden usar otros
+comandos regzbot en respuestas directas o indirectas al informe. Puede
+escribirlos debajo de uno de los comandos anteriormente usados o en las
+respuestas al correo en el que se uso como respuesta a ese correo:
+
+ * Definir o actualizar el título::
+
+       #regzbot title: foo
+
+ * Monitorizar una discusión o un tiquet de bugzilla.kernel.org donde
+   aspectos adicionales del incidente o de la corrección se están
+   comentando -- por ejemplo presentar un parche que corrige la regresión::
+
+       #regzbot monitor: https://lore.kernel.org/all/30th.anniversary.repost@klaava.Helsinki.FI/
+
+  Monitorizar solamente funciona para lore.kernel.org y bugzilla.kernel.org;
+  regzbot considerará todos los mensajes en ese hilo o el tiquet como
+  relacionados al proceso de corrección.
+
+ * Indicar a un lugar donde más detalles de interés, como un mensaje en una
+   lista de correo o un tiquet en un gestor de incidencias que pueden estar
+   levemente relacionados, pero con un tema diferente::
+
+       #regzbot link: https://bugzilla.kernel.org/show_bug.cgi?id=123456789
+
+ * Identificar una regresión como corregida por un commit que se ha mandado
+   aguas arriba o se ha publicado::
+
+        #regzbot fixed-by: 1f2e3d4c5d
+
+
+ * Identificar una regresión como un duplicado de otra que ya es seguida
+   por regzbot::
+
+        #regzbot dup-of: https://lore.kernel.org/all/30th.anniversary.repost@klaava.Helsinki.FI/
+
+ * Identificar una regresión como inválida::
+
+       #regzbot invalid: wasn't a regression, problem has always existed
+
+
+¿Algo más que decir sobre regzbot y sus comandos?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Hay información más detallada y actualizada sobre el bot de seguimiento de
+regresiones del kernel de Linux en: `project page <https://gitlab.com/knurd42/regzbot>`_,
+y entre otros contiene una  `guia de inicio <https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md>`_
+y `documentación de referencia <https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md>`_
+Ambos contienen más detalles que las secciones anteriores.
+
+
+Citas de Linus sobre regresiones
+--------------------------------
+
+A continuación se encuentran unos ejemplos reales (traducidos) de como
+Linus Torvalds espera que se gestionen las regresiones:
+
+
+ * De 2017-10-26 (1/2)
+   <https://lore.kernel.org/lkml/CA+55aFwiiQYJ+YoLKCXjN_beDVfu38mg=Ggg5LFOcqHE8Qi7Zw@mail.gmail.com/>`_::
+
+     Si rompes la configuración de los espacios de usuario ESO ES UNA REGRESIÓN.
+
+     No está bien decir "pero nosotros arreglaremos la configuración del espacio
+     de usuario".
+
+     Realmente. NO ESTÁ BIEN.
+
+     [...]
+
+     La primera regla es:
+
+     - no causamos regresiones
+
+     y el corolario es que cuando una regresión pasa, lo admitimos y lo
+     arreglamos, en vez de echar la culpa al espacio de usuario.
+
+     El hecho de que aparentemente se haya negado la regresión durante
+     tres semanas, significa que lo revertiré y dejaré de integrar peticiones
+     de apparmor hasta que la gente involucrada entienda como se hace
+     el desarrollo del kernel.
+
+
+ * De `2017-10-26 (2/2)
+   <https://lore.kernel.org/lkml/CA+55aFxW7NMAMvYhkvz1UPbUTUJewRt6Yb51QAx5RtrWOwjebg@mail.gmail.com/>`_::
+
+       La gente debería sentirse libre de actualizar su kernel y simplemente
+       no preocuparse por ello.
+
+       Me niego a imponer una limitación del tipo "solo puede actualizar
+       el kernel si actualiza otro programa". Si el kernel trabaja para tí,
+       la regla es que continúe trabajando para tí.
+
+       Ha habido algunas excepciones, pero son pocas y separadas entre sí, y
+       generalmente tienen una razón fundamental para haber sucedido, que era
+       básicamente inevitable, y la gente intentó evitarlas por todos los
+       medios. Quizás no podamos mantener el hardware más, después de que han
+       pasado décadas y nadie los usacon kernel modernos. Quizás haya un
+       problema de seguridad serio con cómo hicimos las cosas, y la gente
+       depende de un modelo fundamentalmente roto. Quizás haya algún otro roto
+       fundamental, que tenga que tener una _flag_ y por razones internas y
+       fundamentales.
+
+       Y nótese que esto trata sobre *romper* los entornos de la gente.
+
+       Cambios de comportamiento pasan, y quizás no se mantengan algunas
+       funcionalidades más. Hay un número de campos en /proc/<pid>/stat que
+       se imprimen como ceros, simplemente porque ni siquiera existen ya en
+       kernel, o porque mostrarlos era un error (típica una fuga de
+       información). Pero los números se sustituyeron por ceros, así que
+       el código que se usaba para parsear esos campos todavía existe. El
+       usuario puede no ver todo lo que podía ver antes, y por eso el
+       omportamiento es claramente diferente, pero las cosas todavía
+       _funcionan_, incluso si no se puede mostrar información sensible
+       (o que no es ya importante).
+
+       Pero si algo realmente se rompe, entonces el cambio debe de arreglarse
+       o revertirse. Y se arregla en el *kernel*. No diciendo "bueno, arreglaremos
+       tu espacio de usuario". Ha sido un cambio en el kernel el que creo
+       el problema, entonces ha de ser el kernel el que lo corrija, porque
+       tenemos un modelo de "actualización". Pero no tenemos una "actualización
+       con el nuevo espacio de usuario".
+
+       Y yo seriamente me negaré a coger código de gente que no entiende y
+       honre esta sencilla regla.
+
+       Y esta regla no va a cambiar.
+
+       Y sí, me doy cuenta que el kernel es "especial" en este respecto. Y
+       estoy orgulloso de ello.
+
+       Y he visto, y puedo señalar, muchos proyectos que dicen "Tenemos que
+       romper ese caso de uso para poder hacer progresos" o "estabas basandote
+       en comportamientos no documentados, debe ser duro ser tú" o "hay una
+       forma mejor de hacer lo que quieres hacer, y tienes que cambiar a esa
+       nueva forma", y yo simplemente no pienso que eso sea aceptable fuera
+       de una fase alfa muy temprana que tenga usuarios experimentales que
+       saben a lo que se han apuntado. El kernel no ha estado en esta
+       situación en las dos últimas décadas.
+
+       Nosotros rompemos la API _dentro_ del kernel todo el tiempo. Y
+       arreglaremos los problemas internos diciendo "tú ahora necesitas
+       hacer XYZ", pero entonces es sobre la API interna del kernel y la
+       gente que hace esto entonces tendrá obviamente que arreglar todos
+       los usos de esa API del kernel. Nadie puede decir "ahora, yo he roto
+       la API que usas, y ahora tú necesitas arreglarlo". Quién rompa algo,
+       lo arregla también.
+
+       Y nosotros, simplemente, no rompemos el espacio de usuario.
+
+ * De `2020-05-21
+   <https://lore.kernel.org/all/CAHk-=wiVi7mSrsMP=fLXQrXK_UimybW=ziLOwSzFTtoXUacWVQ@mail.gmail.com/>`_::
+
+       Las reglas sobre regresiones nunca han sido sobre ningún tipo de
+       comportamiento documentado, o dónde está situado el código.
+
+       Las reglas sobre regresiones son siempre sobre "roturas en el
+       flujo de trabajo del usuario".
+
+       Los usuarios son literalmente la _única_ cosa que importa.
+
+       Argumentaciones como "no debería haber usado esto" o "ese
+       comportamiento es indefinido, es su culpa que su aplicación no
+       funcione" o "eso solía funcionar únicamente por un bug del kernel" son
+       irrelevantes.
+
+       Ahora, la realidad nunca es blanca o negra. Así hemos tenido situaciones
+       como "un serio incidente de seguridad" etc que solamente nos fuerza
+       a hacer cambios que pueden romper el espacio de usuario. Pero incluso
+       entonces la regla es que realmente no hay otras opciones para que
+       las cosas sigan funcionando.
+
+       Y obviamente, si los usuarios tardan años en darse cuenta que algo
+       se ha roto, o si hay formas adecuadas para sortear la rotura que
+       no causen muchos problemas para los usuarios (por ejemplo: "hay un
+       puñado de usuarios, y estos pueden usar la línea de comandos del
+       kernel para evitarlos"; ese tipo de casos), en esos casos se ha sido
+       un poco menos estricto.
+
+       Pero no, "eso que está documentado que está roto" (si es dado a que
+       el código estaba en preparación o porque el manual dice otra cosa) eso
+       es irrelevante. Si preparar el código es tan útil que la gente,
+       acaba usando, esto implica que básicamente es código del kernel con
+       una señal diciendo "por favor limpiar esto".
+
+       El otro lado de la moneda es que la gente que habla sobre "estabilidad
+       de las APIs" están totalmente equivocados. Las APIs tampoco importan.
+       Se puede hacer cualquier cambio que se quiera a una API ... siempre y
+       cuando nadie se de cuenta.
+
+       De nuevo, la regla de las regresiones no trata sobre la documentación,
+       tampoco sobre las APIs y tampoco sobre las fases de la Luna.
+
+       Únicamente trata sobre "hemos causado problemas al espacio de usuario que
+       antes funcionaba".
+
+ * De `2017-11-05
+   <https://lore.kernel.org/all/CA+55aFzUvbGjD8nQ-+3oiMBx14c_6zOj2n7KLN3UsJ-qsd4Dcw@mail.gmail.com/>`_::
+
+       Y nuestra regla sobre las regresiones nunca ha sido "el comportamiento
+       no cambia". Eso podría significar que nunca podríamos hacer ningún
+       cambio.
+
+       Por ejemplo, hacemos cosas como añadir una nueva gestión de
+       errores etc todo el tiempo, con lo cual a veces incluso añadimos
+       tests en el directorio de kselftest.
+
+       Así que claramente cambia el comportamiento todo el tiempo y
+       nosotros no consideramos eso una regresión per se.
+
+       La regla para regresiones para el kernel es para cuando se
+       rompe algo en el espacio de usuario. No en algún test. No en
+       "mira, antes podía hacer X, y ahora no puedo".
+
+ * De `2018-08-03
+   <https://lore.kernel.org/all/CA+55aFwWZX=CXmWDTkDGb36kf12XmTehmQjbiMPCqCRG2hi9kw@mail.gmail.com/>`_::
+
+       ESTÁS OLVIDANDO LA REGLA #1 DEL KERNEL.
+
+       No hacemos regresiones, y no hacemos regresiones porque estás 100%
+       equivocado.
+
+       Y la razón que apuntas en tú opinión es exactamente *PORQUÉ* estás
+       equivocado.
+
+       Tus "buenas razones" son honradas y pura basura.
+
+       El punto de "no hacemos regresiones" es para que la gente pueda
+       actualizar el kernel y nunca tengan que preocuparse por ello.
+
+       > El kernel tiene un bug que ha de ser arreglado
+
+       Eso es *TOTALMENTE* insustancial.
+
+       Chicos, si algo estaba roto o no, NO IMPORTA.
+
+       ¿Porqué?
+
+       Los errores pasan. Eso es un hecho de la vida. Discutir que
+       "tenemos que romper algo porque estábamos arreglando un error" es
+       una locura. Arreglamos decenas de errores cada dia, pensando que
+       "arreglando un bug" significa que podemos romper otra cosa es algo
+       que simplemente NO ES VERDAD.
+
+       Así que los bugs no son realmente relevantes para la discusión. Estos
+       suceden y se detectan, se arreglan, y no tienen nada que ver con
+       "rompemos a los usuarios".
+
+       Porque la única cosa que importa ES EL USUARIO.
+
+       ¿Cómo de complicado es eso de comprender?
+
+       Cualquier persona que use "pero no funcionaba correctamente" es
+       un argumento no tiene la razón. Con respecto al USUARIO, no era
+       erróneo - funcionaba para él/ella.
+
+       Quizás funcionaba *porque* el usuario había tenido el bug en cuenta,
+       y quizás funcionaba porque el usuario no lo había notado - de nuevo
+       no importa. Funcionaba para el usuario.
+
+       Romper el flujo del trabajo de un usuario, debido a un "bug" es la
+       PEOR razón que se pueda usar.
+
+       Es básicamente decir "He cogido algo que funcionaba, y lo he roto,
+       pero ahora es mejor". ¿No ves que un argumento como este es j*didamente
+       absurdo?
+
+       y sin usuarios, tu programa no es un programa, es una pieza de
+       código sin finalidad que puedes perfectamente tirar a la basura.
+
+       Seriamente. Esto es *porque* la regla #1 para el desarrollo del
+       kernel es "no rompemos el espacio de usuario". Porque "He arreglado
+       un error" PARA NADA ES UN ARGUMENTO si esa corrección del código
+       rompe el espacio de usuario.
+
+       si actualizamos el kernel TODO EL TIEMPO, sin actualizar ningún otro
+       programa en absoluto. Y esto es absolutamente necesario, porque
+       las dependencias son terribles.
+
+       Y esto es necesario simplemente porque yo como desarrollador del
+       kernel no actualizo al azar otras herramientas que ni siquiera me
+       importan como desarrollador del kernel, y yo quiero que mis usuarios
+       se sientan a salvo haciendo lo mismo.
+
+       Así que no. Tu regla está COMPLETAMENTE equivocada. Si no puedes
+       actualizar el kernel sin actualizar otro binario al azar, entonces
+       tenemos un problema.
+
+ * De `2021-06-05
+   <https://lore.kernel.org/all/CAHk-=wiUVqHN76YUwhkjZzwTdjMMJf_zN4+u7vEJjmEGh3recw@mail.gmail.com/>`_::
+
+       NO HAY ARGUMENTOS VÁLIDOS PARA UNA REGRESIÓN.
+
+       Honestamente, la gente de seguridad necesita entender que "no funciona"
+       no es un caso de éxito sobre seguridad. Es un caso de fallo.
+
+       Sí, "no funciona" puede ser seguro. Pero en este caso es totalmente
+       inutil.
+
+ * De `2011-05-06 (1/3)
+   <https://lore.kernel.org/all/BANLkTim9YvResB+PwRp7QTK-a5VNg2PvmQ@mail.gmail.com/>`_::
+
+       La compatibilidad de los binarios es más importante.
+
+       Y si los binarios no usan el interfaz para parsear el formato
+       (o justamente lo parsea incorrectamente - como el reciente ejemplo
+       de añadir uuid al /proc/self/mountinfo), entonces es una regresión.
+
+       Y las regresiones se revierten, a menos que haya problemas de
+       seguridad o similares que nos hagan decir "Dios mío, realmente
+       tenemos que romper las cosas".
+
+       No entiendo porqué esta simple lógica es tan difícil para algunos
+       desarrolladores del kernel. La realidad importa. Sus deseos personales
+       NO IMPORTAN NADA.
+
+       Si se crea un interface que puede usarse sin parsear la
+       descripción del interface, entonces estaḿos atascados en el interface.
+       La teoría simplemente no importa.
+
+       Podrias alludar a arreglar las herramientas, e intentar evitar los
+       errores de compatibilidad de ese modo. No hay tampoco tantos de esos.
+
+   De `2011-05-06 (2/3)
+   <https://lore.kernel.org/all/BANLkTi=KVXjKR82sqsz4gwjr+E0vtqCmvA@mail.gmail.com/>`_::
+
+       Esto claramente NO es un tracepoint interno. Por definición. Y está
+       siendo usado por powertop.
+
+   De `2011-05-06 (3/3)
+   <https://lore.kernel.org/all/BANLkTinazaXRdGovYL7rRVp+j6HbJ7pzhg@mail.gmail.com/>`_::
+
+       Tenemos programas que usan esa ABI y si eso se rompe eso es una
+       regresión.
+
+ * De `2012-07-06 <https://lore.kernel.org/all/CA+55aFwnLJ+0sjx92EGREGTWOx84wwKaraSzpTNJwPVV8edw8g@mail.gmail.com/>`_::
+
+       > Ahora esto me ha dejado preguntandome si Debian _inestable_
+       realmente califica
+       > como espacio de usuario estándar.
+
+       Oh, si el kernel rompe algún espacio de usuario estándar, eso cuenta.
+       Muchísima gente usa Debian inestable.
+
+ * De `2019-09-15
+   <https://lore.kernel.org/lkml/CAHk-=wiP4K8DRJWsCo=20hn_6054xBamGKF2kPgUzpB5aMaofA@mail.gmail.com/>`_::
+
+       Una reversión _en particular_ en el último minuto en el último commit
+       (no teniendo en cuenta el propio cambio de versión) justo antes
+       de la liberación, y aunque es bastante incómodo, quizás también es
+       instructivo.
+
+       Lo que es instructivo sobre esto es que he revertido un commit que no
+       tenía ningún error. De hecho, hacía exactamente lo que pretendía, y lo
+       hacía muy bien. De hecho lo hacía _tan_ bien que los muy mejorados
+       patrones de IO que causaba han acabado revelando una regresión observable
+       desde el espacio de usuario, debido a un error real en un componente
+       no relacionado en absoluto.
+
+       De todas maneras, los detalles actuales de esta regresión no son la
+       razón por la que señalo esto como instructivo. Es más que es un ejemplo
+       ilustrativo sobre lo que cuenta como una regresión, y lo que conlleva
+       la regla del kernel de "no regresiones". El commit que ha sido revertido
+       no cambiaba ninguna API, y no introducía ningún error nuevo en el código.
+       Pero acabó exponiendo otro problema, y como eso causaba que la
+       actualización del kernel fallara para el usuario. Así que ha sido
+       revertido.
+
+       El foco aquí, es que hemos hecho la reversión basándonos en el
+       comportamiento reportado en el espacio de usuario, no basado en
+       conceptos como "cambios de ABI" o "provocaba un error". Los mejores
+       patrones de IO que se han presentado debido al cambio únicamente han
+       expuesto un viejo error, y la gente ya dependía del benigno
+       comportamiento de ese viejo error.
+
+       Y que no haya miedo, reintroduciremos el arreglo que mejoraba los
+       patrones de IO una vez hayamos decidido cómo gestionar el hecho de
+       que hay una interacción incorrecta con un interfaz en el que la
+       gente dependía de ese comportamiento previo. Es únicamente que
+       tenemos que ver cómo gestionamos y cómo lo hacemos (no hay menos de
+       tres parches diferentes de tres desarrolladores distintos que estamos
+       evaluando, ... puede haber más por llegar). Mientras tanto, he
+       revertido lo que exponía el problema a los usuarios de esta release,
+       incluso cuando espero que el fix será reintroducido (quizás insertado
+       a posteriormente como un parche estable) una vez lleguemos a un
+       acuerdo sobre cómo se ha de exponer el error.
+
+       Lo que hay que recordar de todo el asunto no es sobre si el cambio
+       de kernel-espacio-de-usuario ABI, o la corrección de un error, o si
+       el código antiguo "en primer lugar nunca debería haber estado ahí".
+       Es sobre si algo rompe el actual flujo de trabajo del usuario.
+
+       De todas formas, esto era mi pequeña aclaración en todo este
+       tema de la regresión. Ya que es la "primera regla de la programación
+       del kernel", me ha parecido que quizás es bueno mencionarlo de
+       vez en cuando.
diff --git linux-libre-6.7-gnu/Documentation/translations/sp_SP/howto.rst linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/howto.rst
similarity index 99%
rename from Documentation/translations/sp_SP/howto.rst
rename to Documentation/translations/sp_SP/process/howto.rst
index f1629738b49d..dd793c0f8574 100644
--- linux-libre-6.7-gnu/Documentation/translations/sp_SP/howto.rst
+++ linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/howto.rst
@@ -1,4 +1,4 @@
-.. include:: ./disclaimer-sp.rst
+.. include:: ../disclaimer-sp.rst
 
 :Original: :ref:`Documentation/process/howto.rst <process_howto>`
 :Translator: Carlos Bilbao <carlos.bilbao@amd.com>
diff --git linux-libre-6.7-gnu/Documentation/translations/sp_SP/process/index.rst linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/index.rst
index d6f3ccfb160e..2239373b3999 100644
--- linux-libre-6.7-gnu/Documentation/translations/sp_SP/process/index.rst
+++ linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/index.rst
@@ -24,3 +24,7 @@
    contribution-maturity-model
    security-bugs
    embargoed-hardware-issues
+   handling-regressions
+   management-style
+   submit-checklist
+   howto
diff --git linux-libre-6.7-gnu/Documentation/translations/sp_SP/process/management-style.rst linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/management-style.rst
new file mode 100644
index 000000000000..4db33fbf8941
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/management-style.rst
@@ -0,0 +1,299 @@
+.. include:: ../disclaimer-sp.rst
+
+:Original: Documentation/process/management-style.rst
+:Translator: Avadhut Naik <avadhut.naik@amd.com>
+
+.. _sp_managementstyle:
+
+
+Estilo de gestión del kernel de Linux
+=====================================
+
+Este es un documento breve que describe el estilo de gestión preferido (o
+inventado, dependiendo de a quién le preguntes) para el kernel de Linux.
+Está destinado a reflejar el documento
+:ref:`translations/sp_SP/process/coding-style.rst <sp_codingstyle>` hasta
+cierto punto y está escrito principalmente para evitar responder a [#f1]_
+las mismas preguntas (o similares) una y otra vez.
+
+El estilo de gestión es muy personal y mucho más difícil de cuantificar
+que reglas simples de estilo de codificación, por lo que este documento
+puede o no tener relación con la realidad. Comenzó como una broma, pero
+eso no significa que no pueda ser realmente cierto. Tendrás que decidir
+por ti mismo.
+
+Por cierto, cuando se hable de “gerente de kernel”, se refiere a las
+personas lideres técnicas, no de las personas que hacen la gestión
+tradicional dentro de las empresas. Si firmas pedidos de compra o tienes
+alguna idea sobre el presupuesto de tu grupo, es casi seguro que no eres
+un gerente de kernel. Estas sugerencias pueden o no aplicarse a usted.
+
+En primer lugar, sugeriría comprar “Seven Habits of Highly Effective
+People” y NO leerlo. Quemarlo, es un gran gesto simbólico.
+
+.. [#f1] Este documento lo hace no tanto respondiendo a la pregunta, sino
+  haciendo dolorosamente obvio para el interrogador que no tenemos ni idea
+  de cuál es la respuesta.
+
+De todos modos, aquí va:
+
+.. _decisiones:
+
+1) Decisiones
+-------------
+
+Todos piensan que los gerentes toman decisiones, y que la toma de
+decisiones en importante. Cuanto más grande y dolorosa sea la decisión,
+más grande debe ser el gerente para tomarla. Eso es muy profundo y obvio,
+pero en realidad no es cierto.
+
+El nombre del partido es **evitar** tener que tomar una decisión. En
+particular, si alguien te dice “elige (a) o (b), realmente necesitamos
+que decidas sobre esto”, estas en problemas como gerente. Es mejor que
+las personas a las que diriges conozcan los detalles mejor que tú, así
+que, si acuden a ti para tomar una decisión técnica, estas jodido.
+Claramente no eres competente para tomar una decisión por ellos.
+
+(Corolario: Si las personas a las que diriges no conocen los detalles
+mejor que tú, también estas jodido, aunque por una razón totalmente
+diferente. Es decir, que estas en el trabajo equivocado y que **ellos**
+deberían gestionando tu brillantez en su lugar).
+
+Así que el nombre del partido es **evitar** las decisiones, al menos las
+grandes y dolorosas. Tomar decisiones pequeñas y sin consecuencias está
+bien, y te hace parecer que sabes lo que estás haciendo, así que lo que
+un gerente de kernel necesita hacer es convertir las decisiones grandes
+y dolorosas en cosas pequeñas a los que a nadie realmente le importa.
+
+Ayuda darse cuenta de que la diferencia clave entre una decisión grande
+y una pequeña es si puede arreglar su decisión después. Cualquier
+decisión se puede hacer pequeña simplemente asegurándose siempre de que
+si te equivocaste (u **estarás** equivocado), siempre puede deshacer el
+daño más tarde retrocediendo. De repente, llegas a ser doblemente
+gerencial por tomar **dos** decisiones intrascendentes - la equivocada
+**y** la correcta.
+
+Y las personas incluso verán eso como un verdadero liderazgo (*tos*
+mierda *tos*).
+
+Por lo tanto, la llave para evitar las grandes decisiones se convierte en
+simplemente evitar hacer cosas que no se pueden deshacer. No te dejes
+llevar a una esquina del que no puedas escapar. Una rata acorralada puede
+ser peligrosa – un gerente acorralado es directamente lamentable.
+
+Resulta que, dado que nadie sería tan estúpido como para dejar que un
+gerente de kernel tenga una gran responsabilidad **de todos modos**,
+generalmente es bastante fácil retroceder. Dado que no vas a poder
+malgastar grandes cantidades de dinero que tal vez no puedas pagar, lo
+único que puedes revertir es una decisión técnica, y ahí retroceder es
+muy fácil: simplemente diles a todos que fuiste un bobo incompetente,
+pide disculpas y deshaz todo el trabajo inútil que hiciste trabajar a la
+gente durante el año pasado. De repente, la decisión que tomaste hace un
+año no era una gran decisión después de todo, ya que se podía deshacer
+fácilmente.
+
+Resulta que algunas personas tienen problemas con este enfoque, por dos
+razones:
+
+ - admitir que eras un idiota es más difícil de lo que parece. A todos
+   nos gusta mantener las apariencias, y salir en público a decir que te
+   equivocaste a veces es muy duro.
+ - que alguien te diga que lo que trabajaste durante el último año no
+   valió la pena después de todo también puede ser duro para los pobres
+   ingenieros humildes, y aunque el **trabajo** real fue bastante fácil
+   de deshacer simplemente eliminándolo, es posible que hayas perdido
+   irrevocablemente la confianza de ese ingeniero. Y recuerda:
+   “irrevocablemente” fue lo que tratamos de evitar en primer lugar, y
+   tu decisión terminó siendo muy grande después de todo.
+
+Afortunadamente, estas dos razones pueden mitigarse eficazmente
+simplemente admitiendo inicialmente que no tienes ni idea, y diciéndole
+a la gente que tu decisión es puramente preliminar, y podría ser la cosa
+equivocada. Siempre te debes reservar el derecho de cambiar de opinión, y
+hacer que la gente sea muy **consciente** de eso. Y es mucho más fácil
+admitir que eres estúpido cuando **aun** no has hecho la cosa realmente
+estúpida.
+
+Entonces, cuando realmente resulta ser estúpido, la gente simplemente
+pone los ojos y dice “Ups, otra vez no”.
+
+Esta admisión preventiva de incompetencia también podría hacer que las
+personas que realmente hacen el trabajo piensen dos veces sobre si vale la
+pena hacerlo o no. Después de todo, si **ellos** no están seguros de si es
+una buena idea, seguro que no deberías alentarlos prometiéndoles que lo
+que trabajan será incluido. Haz que al menos lo piensen dos veces antes de
+embarcarse en un gran esfuerzo.
+
+Recuerda: Es mejor que sepan más sobre los detalles que tú, y
+generalmente ya piensan que tienen la respuesta a todo. Lo mejor que puede
+hacer como gerente no es inculcar confianza, sino más bien una dosis
+saludable de pensamiento crítico sobre lo que hacen.
+
+Por cierto, otra forma de evitar una decisión es quejarse lastimeramente
+de “no podemos hacer ambas cosas?” y parecer lamentable. Créeme, funciona.
+Si no está claro cuál enfoque es mejor, lo descubrirán. La respuesta puede
+terminar siendo que ambos equipos se sientan tan frustrados por la
+situación que simplemente se den por vencidos.
+
+Eso puede sonar como un fracaso, pero generalmente es una señal de que
+había algo mal con ambos proyectos, y la razón por la que las personas
+involucradas no pudieron decidir fue que ambos estaban equivocados.
+Terminas oliendo a rosas y evitaste otra decisión que podrías haber
+metido la pata.
+
+2) Gente
+--------
+
+La mayoría de las personas son idiotas, y ser gerente significa que
+tendrás que lidiar con eso, y quizás lo más importante, que **ellos**
+tienen que lidiar **contigo**.
+
+Resulta que, si bien es fácil deshacer los errores técnicos, no es tan
+fácil deshacer los trastornos de personalidad. Solo tienes que vivir
+con los suyos - y el tuyo.
+
+Sin embargo, para prepararse como gerente del kernel, es mejor recordar
+no quemar ningún puente, bombardear a ningún aldeano inocente o alienar
+a demasiados desarrolladores del kernel. Resulta que alienar a las
+personas es bastante fácil, y desalienarlas es difícil. Por lo tanto,
+“alienar” cae inmediatamente debajo del título “no reversible”, y se
+convierte en un no-no según :ref:`decisiones`.
+
+Aquí solo hay algunas reglas simples:
+
+ (1) No llames a la gente pen*ejos (al menos no en público)
+ (2) Aprende a disculparte cuando olvidaste la regla (1)
+
+El problema con #1 es que es muy fácil de hacer, ya que puedes decir
+“eres un pen*ejo” de millones de manera diferentes [#f2]_, a veces sin
+siquiera darte cuenta, y casi siempre con una convicción ardiente de que
+tienes razón.
+
+Y cuanto más convencido estés de que tienes razón (y seamos sinceros,
+puedes llamar a casi **cualquiera** un pen*ejo, y a menudo **tendrás**
+razón), más difícil termina siendo disculparse después.
+
+Para resolver este problema, realmente solo tienes dos opciones:
+
+ - Se muy buenos en las disculpas.
+ - Difunde el “amor” de manera tan uniforme que nadie termina sintiendo
+   que es atacado injustamente. Hazlo lo suficientemente ingenioso, e
+   incluso podría divertirse.
+
+La opción de ser infaliblemente educado realmente no existe. Nadie
+confiará en alguien que está ocultando tan claramente su verdadero
+carácter.
+
+.. [#f2] Paul Simon cantó “Cincuenta maneras de dejar a tu amante” porque,
+  francamente, “Un millón de maneras de decirle a un desarrollador que es
+  un pen*ejo” no escanea tan bien. Pero estoy seguro de que lo pensó.
+
+3) Gente II – el Buen Tipo
+--------------------------
+
+Aunque resulta que la mayoría de las personas son idiotas, el corolario
+de eso es, tristemente, que tú también seas uno, y aunque todos podemos
+disfrutar del conocimiento seguro de que somos mejores que la persona
+promedio (somos realistas, nadie cree que nunca que son promedio o debajo
+del promedio), también debemos admitir que no somos el cuchillo más
+afilado alrededor, y habrá otras personas que son menos idiotas que tú.
+
+Algunas personas reaccionan mal a las personas inteligentes. Otras se
+aprovechan de ellos.
+
+Asegúrate de que tú, como mantenedor del kernel, estás en el segundo
+grupo. Aguanta con ellos, porque son las personas que te facilitarán el
+trabajo. En particular, podrán tomar tus decisiones por ti, que es de lo
+que se trata el juego.
+
+Así que cuando encuentras a alguien más inteligente que tú, simplemente
+sigue adelante. Sus responsabilidades de gestión se convierten en gran
+medida en las de decir “Suena como una buena idea, - hazlo sin
+restricciones”, o “Eso suena bien, pero ¿qué pasa con xxx?". La segunda
+versión en particular es una excelente manera de aprender algo nuevo
+sobre “xxx” o parecer **extra** gerencial al señalar algo que la persona
+más inteligente no había pensado. En cualquier caso, sales ganando.
+
+Una cosa para tener en cuenta es darse cuenta de que la grandeza en un
+área no necesariamente se traduce en otras áreas. Así que puedes impulsar
+a la gente en direcciones específicas, pero seamos realistas, pueden ser
+buenos en lo que hacen, y ser malos en todo lo demás. La buena noticia es
+que las personas tienden a gravitar naturalmente hacia lo que son buenos,
+por lo que no es como si estuvieras haciendo algo irreversible cuando los
+impulsas en alguna dirección, simplemente no presiones demasiado.
+
+4) Colocar la culpa
+-------------------
+
+Las cosas saldrán mal, y la gente quiere culpar a alguien. Etiqueta, tú
+lo eres.
+
+En realidad, no es tan difícil aceptar la culpa, especialmente si la gente
+se da cuenta de que no fue **toda** tu culpa. Lo que nos lleva a la mejor
+manera de asumir la culpa: hacerlo por otra persona. Te sentirás bien por
+asumir la caída, ellos se sentirán bien por no ser culpados, y la persona
+que perdió toda su colección de pornografía de 36 GB debido a tu
+incompetencia admitirá a regañadientes que al menos intentaste escapar
+de ella.
+
+Luego haz que el desarrollador que realmente metió la pata (si puedes
+encontrarlo) sepa **en privado** que metió la pata. No solo para que
+pueda evitarlo en futuro, sino para que sepan que te deben uno. Y, quizás
+aún más importante, también es probable que sea la persona que puede
+solucionarlo. Porque, seamos sinceros, seguro que no eres tú.
+
+Asumir la culpa también es la razón por la que llegas a ser un gerente
+en primer lugar. Es parte de lo que hace que la gente confíe en ti y te
+permita la gloria potencial porque eres tú quien puede decir “metí la
+pata”. Y si has seguido las reglas anteriores, ya serás bastante bueno
+para decir eso.
+
+5) Cosas que evitar
+-------------------
+
+Hay una cosa que la gente odia incluso más que ser llamado “pen*ejo”,
+y que es ser llamado “pen*ejo” en una voz mojigata. Por lo primero,
+puedes disculparte, por lo segundo, realmente, no tendrás la oportunidad.
+Es probable que ya no estén escuchando, incluso si de lo contrario haces
+un buen trabajo.
+
+Todos pensamos que somos mejores que los demás, lo que significa que
+cuando alguien más se da aires, **realmente** nos molesta. Puedes ser
+moral e intelectualmente superior a todos los que te rodean, pero no
+trates de hacerlo demasiado obvio a menos que tengas **la intención**
+real de irritar a alguien [#f3]_.
+
+Del mismo modo, no seas demasiado educado o sutil acerca de las cosas. La
+cortesía fácilmente termina yendo demasiado lejos y ocultado el problema,
+y como dicen “En internet, nadie puede oírte ser sutil”. Usa un gran
+objeto contundente para enfatizar el punto, porque realmente no puedes
+depender de que las personas entiendan tu punto de otra manera.
+
+Un poco de humor puede ayudar a suavizar tanto la franqueza como la
+moralización. Exagerar hasta el punto de ser ridículo puede reforzar un
+punto sin hacer que sea doloroso para el destinatario, quien simplemente
+piensa que estas siendo tonto. Por lo tanto, puede ayudarnos a superar el
+bloqueo mental personal que todos tenemos sobre la crítica.
+
+.. [#f3] La pista: Los grupos de noticias de Internet que no están
+  directamente relacionados con tu trabajo son excelentes maneras de
+  desahogar tus frustraciones con otras personas. Escribe mensajes
+  insultantes con una mueca de desprecio solo para entrar en un humor de
+  vez en cuando, y te sentirás limpio. Eso sí, no te cagues demasiado
+  cerca de casa.
+
+6) ¿Por qué a mí?
+-----------------
+
+Dado que tu principal responsabilidad parece ser asumir la culpa de los
+errores de otras personas y hacer dolorosamente obvio para todos los
+demás que eres incompetente, la pregunta obvia es: ¿por qué hacerlo en
+primer lugar?
+
+Pase lo que pase, **tendrás** una sensación inmensa de logro personal por
+estar “a cargo”. No importa el hecho de que realmente estés liderando al
+tratar de mantenerte al día con todos los demás y correr detrás de ellos
+lo más rápido que puedes. Todo el mundo seguirá pensando que eres la
+persona a cargo.
+
+Es un gran trabajo si puedes descifrarlo.
diff --git linux-libre-6.7-gnu/Documentation/translations/sp_SP/process/submit-checklist.rst linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/submit-checklist.rst
new file mode 100644
index 000000000000..0d6651f9d871
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/submit-checklist.rst
@@ -0,0 +1,133 @@
+.. include:: ../disclaimer-sp.rst
+
+:Original: Documentation/process/submit-checklist.rst
+:Translator: Avadhut Naik <avadhut.naik@amd.com>
+
+.. _sp_submitchecklist:
+
+Lista de comprobación para enviar parches del kernel de Linux
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Aquí hay algunas cosas básicas que los desarrolladores deben hacer si
+quieren que sus envíos de parches del kernel sean aceptados más
+rápidamente.
+
+Todo esto está más allá de la documentación que se proporciona en
+:ref:`Documentation/translations/sp_SP/process/submitting-patches.rst <sp_submittingpatches>`
+y en otros lugares con respecto al envío de parches del kernel de Linux.
+
+1) Si utiliza una funcionalidad, #include el archivo que define/declara
+   esa funcionalidad. No dependa de otros archivos de encabezado que
+   extraigan los que utiliza.
+
+2) Compile limpiamente:
+
+  a) Con las opciones ``CONFIG`` aplicables o modificadas ``=y``, ``=m``,
+     y ``=n``. Sin advertencias/errores del compilador ``gcc``, ni
+     advertencias/errores del linker.
+
+  b) Aprobar ``allnoconfig``, ``allmodconfig``
+
+  c) Compila correctamente cuando se usa ``O=builddir``
+
+  d) Cualquier documentación o cambios se compilan correctamente sin
+     nuevas advertencias/errores. Utilice ``make htmldocs`` o
+     ``make pdfdocs`` para comprobar la compilación y corregir cualquier
+     problema.
+
+3) Se compila en varias arquitecturas de CPU mediante herramientas de
+   compilación cruzada locales o alguna otra granja de compilación.
+
+4) ppc64 es una buena arquitectura para verificar la compilación cruzada
+   por que tiende a usar ``unsigned long`` para cantidades de 64-bits.
+
+5) Verifique su parche para el estilo general según se detalla en
+   :ref:`Documentation/translations/sp_SP/process/coding-style.rst <sp_codingstyle>`.
+   Verifique las infracciones triviales con el verificador de estilo de
+   parches antes de la entrega (``scripts/checkpatch.pl``).
+   Debería ser capaz de justificar todas las infracciones que permanezcan
+   en su parche.
+
+6) Cualquier opción ``CONFIG`` nueva o modificada no altera el menú de
+   configuración y se desactiva por defecto, a menos que cumpla con los
+   criterios de excepción documentados en
+   ``Documentation/kbuild/kconfig-language.rst`` Atributos del menú: valor por defecto.
+
+7) Todas las nuevas opciones de ``Kconfig`` tienen texto de ayuda.
+
+8) Ha sido revisado cuidadosamente con respecto a las combinaciones
+   relevantes de ``Kconfig``. Esto es muy difícil de hacer correctamente
+   con las pruebas -- la concentración mental da resultados aquí.
+
+9) Verifique limpiamente con sparse.
+
+10) Use ``make checkstack`` y solucione cualquier problema que encuentre.
+
+    .. note::
+
+       ``checkstack`` no señala los problemas explícitamente, pero
+       cualquier función que use más de 512 bytes en la pila es
+       candidata para el cambio.
+
+11) Incluya :ref:`kernel-doc <kernel_doc>` para documentar las API
+    globales del kernel. (No es necesario para funciones estáticas, pero
+    también está bien.) Utilice ``make htmldocs`` o ``make pdfdocs``
+    para comprobar el :ref:`kernel-doc <kernel_doc>` y solucionar
+    cualquier problema.
+
+12) Ha sido probado con ``CONFIG_PREEMPT``, ``CONFIG_DEBUG_PREEMPT``,
+    ``CONFIG_DEBUG_SLAB``, ``CONFIG_DEBUG_PAGEALLOC``, ``CONFIG_DEBUG_MUTEXES``,
+    ``CONFIG_DEBUG_SPINLOCK``, ``CONFIG_DEBUG_ATOMIC_SLEEP``
+    ``CONFIG_PROVE_RCU`` y ``CONFIG_DEBUG_OBJECTS_RCU_HEAD`` todos
+    habilitados simultáneamente.
+
+13) Ha sido probado en tiempo de compilación y ejecución con y sin
+    ``CONFIG_SMP`` y ``CONFIG_PREEMPT``.
+
+14) Todas las rutas de código se han ejercido con todas las
+    características de lockdep habilitadas.
+
+15) Todas las nuevas entradas de ``/proc`` están documentadas en
+    ``Documentation/``.
+
+16) Todos los nuevos parámetros de arranque del kernel están documentados
+    en ``Documentation/admin-guide/kernel-parameters.rst``.
+
+17) Todos los nuevos parámetros del módulo están documentados con
+    ``MODULE_PARM_DESC()``.
+
+18) Todas las nuevas interfaces de espacio de usuario están documentadas
+    en ``Documentation/ABI/``. Consulte ``Documentation/ABI/README`` para
+    obtener más información. Los parches que cambian las interfaces del
+    espacio de usuario deben ser CCed a linux-api@vger.kernel.org.
+
+19) Se ha comprobado con la inyección de al menos errores de asignación
+    de slab y página. Consulte ``Documentation/fault-injection/``.
+
+    Si el nuevo código es sustancial, la adición de la inyección de
+    errores específica del subsistema podría ser apropiada.
+
+20) El nuevo código añadido ha sido compilado con ``gcc -W`` (use
+    ``make KCFLAGS=-W``). Esto generara mucho ruido per es buena para
+    encontrar errores como "warning: comparison between signed and unsigned".
+
+21) Se prueba después de que se haya fusionado en el conjunto de
+    parches -mm para asegurarse de que siga funcionando con todos los
+    demás parches en cola y varios cambios en VM, VFS y otros subsistemas.
+
+22) Todas las barreras de memoria {p.ej., ``barrier()``, ``rmb()``,
+    ``wmb()``} necesitan un comentario en el código fuente que explique
+    la lógica de lo que están haciendo y por qué.
+
+23) Si se añaden algún ioctl en el parche, actualice también
+    ``Documentation/userspace-api/ioctl/ioctl-number.rst``.
+
+24) Si su código fuente modificado depende o utiliza cualquiera de las
+    API o características del kernel que están relacionadas con los
+    siguientes símbolos ``Kconfig`` entonces pruebe varias compilaciones
+    con los símbolos ``Kconfig`` relacionados deshabilitados y/o ``=m``
+    (si esa opción esta disponible) [no todos estos al mismo tiempo, solo
+    varias/aleatorias combinaciones de ellos]:
+
+    ``CONFIG_SMP``, ``CONFIG_SYSFS``, ``CONFIG_PROC_FS``, ``CONFIG_INPUT``, ``CONFIG_PCI``, ``CONFIG_BLOCK``, ``CONFIG_PM``, ``CONFIG_MAGIC_SYSRQ``
+    ``CONFIG_NET``, ``CONFIG_INET=n`` (pero luego con ``CONFIG_NET=y``).
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst
index 82bfac180bdc..cec38dda8298 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst
@@ -5,4 +5,4 @@
 :Original: Documentation/arch/loongarch/features.rst
 :Translator: Huacai Chen <chenhuacai@loongson.cn>
 
-.. kernel-feat:: $srctree/Documentation/features loongarch
+.. kernel-feat:: features loongarch
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/arch/mips/features.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/arch/mips/features.rst
index da1b956e4a40..0d6df97db069 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/arch/mips/features.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/arch/mips/features.rst
@@ -10,4 +10,4 @@
 
 .. _cn_features:
 
-.. kernel-feat:: $srctree/Documentation/features mips
+.. kernel-feat:: features mips
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/arch/riscv/boot.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/arch/riscv/boot.rst
new file mode 100644
index 000000000000..0c2619095819
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/arch/riscv/boot.rst
@@ -0,0 +1,155 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: ../../disclaimer-zh_CN.rst
+
+:Original: Documentation/arch/riscv/boot.rst
+
+:翻译:
+
+ 龙进 Jin Long <longjin@dragonos.org>
+
+========================
+RISC-V内核启动要求和限制
+========================
+
+:Author: Alexandre Ghiti <alexghiti@rivosinc.com>
+:Date: 23 May 2023
+
+这份文档描述了RISC-V内核对引导加载程序和固件的期望，以及任何开发者在接触
+早期启动过程时必须牢记的约束。在这份文档中， ``早期启动过程`` 指的是在最
+终虚拟映射设置之前运行的任何代码。
+
+内核预加载的要求和限制
+======================
+
+RISC-V内核对引导加载程序和平台固件有以下要求：
+
+寄存器状态
+----------
+
+RISC-V内核期望：
+
+  * ``$a0`` 应包含当前核心的hartid。
+  * ``$a1`` 应包含内存中设备树的地址。
+
+CSR 寄存器状态
+--------------
+
+RISC-V内核期望：
+
+  * ``$satp = 0``： 如果存在MMU，必须将其禁用。
+
+为常驻固件保留的内存
+--------------------
+
+RISC-V内核在直接映射中不能映射任何常驻内存或用PMPs保护的内存，
+因此固件必须根据设备树规范 和/或 UEFI规范正确标记这些区域。
+
+内核的位置
+----------
+
+RISC-V内核期望被放置在PMD边界（对于rv64为2MB对齐，对于rv32为4MB对齐）。
+请注意，如果不是这样，EFI stub 将重定位内核。
+
+硬件描述
+--------
+
+固件可以将设备树或ACPI表传递给RISC-V内核。
+
+设备树可以直接从前一阶段通过$a1寄存器传递给内核，或者在使用UEFI启动时，
+可以通过EFI配置表传递。
+
+ACPI表通过EFI配置表传递给内核。在这种情况下，EFI stub 仍然会创建一个
+小的设备树。请参阅下面的"EFI stub 和设备树"部分，了解这个设备树的详细
+信息。
+
+内核入口
+--------
+
+在SMP系统中，有两种方法可以进入内核：
+
+- ``RISCV_BOOT_SPINWAIT``：固件在内核中释放所有的hart，一个hart赢
+  得抽奖并执行早期启动代码，而其他的hart则停在那里等待初始化完成。这种
+  方法主要用于支持没有SBI HSM扩展和M模式RISC-V内核的旧固件。
+- ``有序启动``：固件只释放一个将执行初始化阶段的hart，然后使用SBI HSM
+  扩展启动所有其他的hart。有序启动方法是启动RISC-V内核的首选启动方法，
+  因为它可以支持CPU热插拔和kexec。
+
+UEFI
+----
+
+UEFI 内存映射
+~~~~~~~~~~~~~
+
+使用UEFI启动时，RISC-V内核将只使用EFI内存映射来填充系统内存。
+
+UEFI固件必须解析 ``/reserved-memory`` 设备树节点的子节点，并遵守设备
+树规范，将这些子节点的属性（ ``no-map`` 和 ``reusable`` ）转换为其正
+确的EFI等价物（参见设备树规范v0.4-rc1的"3.5.4/reserved-memory和
+UEFI"部分）。
+
+RISCV_EFI_BOOT_PROTOCOL
+~~~~~~~~~~~~~~~~~~~~~~~
+
+使用UEFI启动时，EFI stub 需要引导hartid以便将其传递给 ``$a1`` 中的
+RISC-V内核。EFI stub使用以下方法之一获取引导hartid：
+
+- ``RISCV_EFI_BOOT_PROTOCOL`` （**首选**）。
+- ``boot-hartid`` 设备树子节点（**已弃用**）。
+
+任何新的固件都必须实现 ``RISCV_EFI_BOOT_PROTOCOL``，因为基于设备树
+的方法现已被弃用。
+
+早期启动的要求和约束
+====================
+
+RISC-V内核的早期启动过程遵循以下约束：
+
+EFI stub 和设备树
+-----------------
+
+使用UEFI启动时，EFI stub 会用与arm64相同的参数补充（或创建）设备树，
+这些参数在Documentation/arch/arm/uefi.rst中的
+"UEFI kernel supporton ARM"段落中有描述。
+
+虚拟映射安装
+------------
+
+在RISC-V内核中，虚拟映射的安装分为两步进行：
+
+1. ``setup_vm()`` 在 ``early_pg_dir`` 中安装一个临时的内核映射，这
+   允许发现系统内存。   此时只有内核文本/数据被映射。在建立这个映射时，
+   不能进行分配（因为系统内存还未知），所以``early_pg_dir``页表是静
+   态分配的（每个级别只使用一个表）。
+
+2. ``setup_vm_final()`` 在 ``swapper_pg_dir`` 中创建最终的内核映
+   射，并利用发现的系统内存   创建线性映射。在建立这个映射时，内核可以
+   分配内存，但不能直接访问它（因为直接映射还不存在），所以它使用fixmap
+   区域的临时映射来访问新分配的页表级别。
+
+为了让 ``virt_to_phys()`` 和 ``phys_to_virt()`` 能够正确地将直接
+映射地址转换为物理地址，它们需要知道DRAM的起始位置。这发生在步骤1之后，
+就在步骤2安装直接映射之前（参见arch/riscv/mm/init.c中的
+``setup_bootmem()`` 函数）。在安装最终虚拟映射之前使用这些宏时必须
+仔细检查。
+
+通过fixmap进行设备树映射
+------------------------
+
+由于 ``reserved_mem`` 数组是用 ``setup_vm()`` 建立的虚拟地址初始化
+的，并且与``setup_vm_final()``建立的映射一起使用，RISC-V内核使用
+fixmap区域来映射设备树。这确保设备树可以通过两种虚拟映射访问。
+
+Pre-MMU执行
+-----------
+
+在建立第一个虚拟映射之前，需要运行一些代码。这些包括第一个虚拟映射的安装本身，
+早期替代方案的修补，以及内核命令行的早期解析。这些代码必须非常小心地编译，因为：
+
+- ``-fno-pie``：这对于使用``-fPIE``的可重定位内核是必需的，否则，任何对
+  全局符号的访问都将通过  GOT进行，而GOT只是虚拟地重新定位。
+- ``-mcmodel=medany``：任何对全局符号的访问都必须是PC相对的，以避免在设
+  置MMU之前发生任何重定位。
+- *所有* 的仪表化功能也必须被禁用（包括KASAN，ftrace和其他）。
+
+由于使用来自不同编译单元的符号需要用这些标志编译该单元，我们建议尽可能不要使用
+外部符号。
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/arch/riscv/index.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/arch/riscv/index.rst
index 3b041c116169..96573459105e 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/arch/riscv/index.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/arch/riscv/index.rst
@@ -17,6 +17,7 @@ RISC-V 体系结构
 .. toctree::
     :maxdepth: 1
 
+    boot
     boot-image-header
     vm-layout
     patch-acceptance
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/core-api/printk-basics.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/core-api/printk-basics.rst
index 59c6efb3fc41..cafa01bccff2 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/core-api/printk-basics.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/core-api/printk-basics.rst
@@ -100,7 +100,7 @@ printk()的用法通常是这样的::
 
 为了调试，还有两个有条件编译的宏：
 pr_debug()和pr_devel()，除非定义了 ``DEBUG`` (或者在pr_debug()的情况下定义了
-``CONFIG_DYNAMIC_DEBUG`` )，否则它们会被编译。
+``CONFIG_DYNAMIC_DEBUG`` )，否则它们不会被编译。
 
 
 函数接口
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/dev-tools/index.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/dev-tools/index.rst
index 02577c379007..c2db3e566b1b 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/dev-tools/index.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/dev-tools/index.rst
@@ -14,11 +14,8 @@
 有关测试专用工具的简要概述，参见
 Documentation/translations/zh_CN/dev-tools/testing-overview.rst
 
-.. class:: toc-title
-
-	   目录
-
 .. toctree::
+   :caption: 目录
    :maxdepth: 2
 
    testing-overview
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/dev-tools/testing-overview.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/dev-tools/testing-overview.rst
index 69e7e4cb2002..c91f9b60f9f1 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/dev-tools/testing-overview.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/dev-tools/testing-overview.rst
@@ -3,7 +3,7 @@
 .. include:: ../disclaimer-zh_CN.rst
 
 :Original: Documentation/dev-tools/testing-overview.rst
-:Translator: 胡皓文 Hu Haowen <src.res.211@gmail.com>
+:Translator: 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 ============
 内核测试指南
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/driver-api/gpio/index.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/driver-api/gpio/index.rst
index 9ab64e94aced..9a6a14162a6c 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/driver-api/gpio/index.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/driver-api/gpio/index.rst
@@ -14,9 +14,8 @@
 通用型输入/输出（GPIO）
 =======================
 
-目录:
-
 .. toctree::
+   :caption: 目录
    :maxdepth: 2
 
    legacy
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/driver-api/index.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/driver-api/index.rst
index ba354e1f4e6d..92ff1b7fc3d3 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/driver-api/index.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/driver-api/index.rst
@@ -17,11 +17,8 @@ Linux驱动实现者的API指南
 内核提供了各种各样的接口来支持设备驱动的开发。这份文档只是对其中一些接口进行了
 一定程度的整理——希望随着时间的推移，它能变得更好！可用的小节可以在下面看到。
 
-.. class:: toc-title
-
-	   目录列表：
-
 .. toctree::
+   :caption: 目录列表
    :maxdepth: 2
 
    gpio/index
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/process/development-process.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/development-process.rst
index 30cffe66c075..c10d8e2e21eb 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/process/development-process.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/development-process.rst
@@ -8,9 +8,10 @@
 内核开发过程指南
 ================
 
-内容:
+本文档的目的是帮助开发人员（及其经理）以最小的挫折感与开发社区合作。它试图记录这个社区如何以一种不熟悉Linux内核开发（或者实际上是自由软件开发）的人可以访问的方式工作。虽然这里有一些技术资料，但这是一个面向过程的讨论，不需要深入了解内核编程就可以理解。
 
 .. toctree::
+   :caption: 内容
    :numbered:
    :maxdepth: 2
 
@@ -22,5 +23,3 @@
    6.Followthrough
    7.AdvancedTopics
    8.Conclusion
-
-本文档的目的是帮助开发人员（及其经理）以最小的挫折感与开发社区合作。它试图记录这个社区如何以一种不熟悉Linux内核开发（或者实际上是自由软件开发）的人可以访问的方式工作。虽然这里有一些技术资料，但这是一个面向过程的讨论，不需要深入了解内核编程就可以理解。
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/process/index.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/index.rst
index a1a35f88f4ae..3ca02d281be0 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/process/index.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/index.rst
@@ -5,10 +5,11 @@
 
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :ref:`Documentation/process/index.rst <process_index>`
-:Translator: Alex Shi <alex.shi@linux.alibaba.com>
+:Original: Documentation/process/index.rst
 
-.. _cn_process_index:
+:翻译:
+
+ Alex Shi <alex.shi@linux.alibaba.com>
 
 ========================
 与Linux 内核社区一起工作
@@ -23,29 +24,55 @@
 .. toctree::
    :maxdepth: 1
 
+   license-rules
    howto
    code-of-conduct
    code-of-conduct-interpretation
+   development-process
    submitting-patches
    programming-language
    coding-style
-   development-process
+   maintainer-pgp-guide
    email-clients
-   license-rules
    kernel-enforcement-statement
    kernel-driver-statement
 
+TODOLIST:
+
+* handling-regressions
+* maintainer-handbooks
+
+安全方面, 请阅读:
+
+.. toctree::
+   :maxdepth: 1
+
+   embargoed-hardware-issues
+
+TODOLIST:
+
+* security-bugs
+
 其它大多数开发人员感兴趣的社区指南：
 
 
 .. toctree::
    :maxdepth: 1
 
-   submit-checklist
    stable-api-nonsense
-   stable-kernel-rules
    management-style
-   embargoed-hardware-issues
+   stable-kernel-rules
+   submit-checklist
+
+TODOLIST:
+
+* changes
+* kernel-docs
+* deprecated
+* maintainers
+* researcher-guidelines
+* contribution-maturity-model
+
 
 这些是一些总体性技术指南，由于不大好分类而放在这里：
 
@@ -54,6 +81,16 @@
 
    magic-number
    volatile-considered-harmful
+   ../arch/riscv/patch-acceptance
+   ../core-api/unaligned-memory-access
+
+TODOLIST:
+
+* applying-patches
+* backporting
+* adding-syscalls
+* botching-up-ioctls
+* clang-format
 
 .. only::  subproject and html
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/process/magic-number.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/magic-number.rst
index 4a92ebb619ee..4e4aeaca796c 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/process/magic-number.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/magic-number.rst
@@ -1,58 +1,67 @@
-.. _cn_magicnumbers:
-
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :ref:`Documentation/process/magic-number.rst <magicnumbers>`
+:Original: Documentation/process/magic-number.rst
+
+:翻译:
 
-如果想评论或更新本文的内容，请直接发信到LKML。如果你使用英文交流有困难的话，也可
-以向中文版维护者求助。如果本翻译更新不及时或者翻译存在问题，请联系中文版维护者::
+ 贾威威 Jia Wei Wei <harryxiyou@gmail.com>
 
-        中文版维护者： 贾威威 Jia Wei Wei <harryxiyou@gmail.com>
-        中文版翻译者： 贾威威 Jia Wei Wei <harryxiyou@gmail.com>
-        中文版校译者： 贾威威 Jia Wei Wei <harryxiyou@gmail.com>
+:校译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
 Linux 魔术数
 ============
 
-这个文件是有关当前使用的魔术值注册表。当你给一个结构添加了一个魔术值，你也应该把这个魔术值添加到这个文件，因为我们最好把用于各种结构的魔术值统一起来。
+这个文件是有关当前使用的魔术值注册表。当你给一个结构体添加了一个魔术值，你也
+应该把这个魔术值添加到这个文件，因为我们最好把用于各种结构体的魔术值统一起来。
 
-使用魔术值来保护内核数据结构是一个非常好的主意。这就允许你在运行期检查(a)一个结构是否已经被攻击，或者(b)你已经给一个例行程序通过了一个错误的结构。后一种情况特别地有用---特别是当你通过一个空指针指向结构体的时候。tty源码，例如，经常通过特定驱动使用这种方法并且反复地排列特定方面的结构。
+使用魔术值来保护内核数据结构是一个 **非常好的主意** 。这就允许你在运行时检
+查一个结构体(a)是否已经被攻击，或者(b)你已经给一个例程传递了一个错误的结构
+体。最后一种情况特别地有用---特别是当你通过一个空指针指向结构体的时候。例如，
+tty源码经常通过特定驱动使用这种方法用来反复地排列特定方面的结构体。
 
-使用魔术值的方法是在结构的开始处声明的，如下::
+使用魔术值的方法是在结构体的开头声明它们，如下::
 
         struct tty_ldisc {
 	        int	magic;
         	...
         };
 
-当你以后给内核添加增强功能的时候，请遵守这条规则！这样就会节省数不清的调试时间，特别是一些古怪的情况，例如，数组超出范围并且重新写了超出部分。遵守这个规则，这些情况可以被快速地，安全地避免。
+当你以后给内核添加增强功能的时候，请遵守这条规则！这样就会节省数不清的调试
+时间，特别是一些古怪的情况，例如，数组超出范围并且覆盖写了超出部分。利用这
+个规则，这些情况可以被快速地，安全地检测到这些案例。
+
+变更日志::
 
-		Theodore Ts'o
-		  31 Mar 94
+					Theodore Ts'o
+					31 Mar 94
 
-给当前的Linux 2.1.55添加魔术表。
+  给当前的Linux 2.1.55添加魔术表。
 
-		Michael Chastain
-		<mailto:mec@shout.net>
-		22 Sep 1997
+					Michael Chastain
+					<mailto:mec@shout.net>
+					22 Sep 1997
 
-现在应该最新的Linux 2.1.112.因为在特性冻结期间，不能在2.2.x前改变任何东西。这些条目被数域所排序。
+  现在应该最新的Linux 2.1.112.因为在特性冻结期间，不能在2.2.x前改变任
+  何东西。这些条目被数域所排序。
 
-		Krzysztof G.Baranowski
-	        <mailto: kgb@knm.org.pl>
-		29 Jul 1998
+					Krzysztof G.Baranowski
+					<mailto: kgb@knm.org.pl>
+					29 Jul 1998
 
-更新魔术表到Linux 2.5.45。刚好越过特性冻结，但是有可能还会有一些新的魔术值在2.6.x之前融入到内核中。
+  更新魔术表到Linux 2.5.45。刚好越过特性冻结，但是有可能还会有一些新的魔
+  术值在2.6.x之前融入到内核中。
 
-		Petr Baudis
-		<pasky@ucw.cz>
-		03 Nov 2002
+					Petr Baudis
+					<pasky@ucw.cz>
+					03 Nov 2002
 
-更新魔术表到Linux 2.5.74。
+  更新魔术表到Linux 2.5.74。
 
-		Fabian Frederick
-                <ffrederick@users.sourceforge.net>
-		09 Jul 2003
+					Fabian Frederick
+					<ffrederick@users.sourceforge.net>
+					09 Jul 2003
 
 ===================== ================ ======================== ==========================================
 魔术数名              数字             结构                     文件
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/process/maintainer-pgp-guide.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/maintainer-pgp-guide.rst
new file mode 100644
index 000000000000..eb12694a4c59
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/maintainer-pgp-guide.rst
@@ -0,0 +1,789 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: ../disclaimer-zh_CN.rst
+
+:Original: Documentation/process/maintainer-pgp-guide.rst
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
+
+:校译:
+
+
+===================
+内核维护者 PGP 指南
+===================
+
+:作者: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
+
+本文档面向 Linux 内核开发者，特别是子系统维护人员。文档中含有Linux 基金
+会发布的更通用的 `保护代码完整性`_ 指南中讨论的内容子集。阅读该文档，以更
+深入地讨论本指南中提到的一些主题。
+
+.. _`保护代码完整性`: https://github.com/lfit/itpol/blob/master/protecting-code-integrity.md
+
+PGP 在 Linux 内核开发中的作用
+=============================
+
+PGP 有助于确保 Linux 内核开发社区产出代码的完整性，并在较小程度上，通过
+PGP 签名的电子邮件交换，在开发者之间建立可信的交流渠道。
+
+Linux 内核源代码主要有两种（维护）方式:
+
+- 分布式源仓库 (git)
+- 定期发布快照 (tarballs)
+
+git 仓库和 tarball 都带有创建官方内核版本的内核开发者的 PGP 签名。这
+些签名提供了加密保证，即保证 kernel.org 或任何其他镜像提供的可下载版本
+与这些开发者在其工作站上的版本相同。为此:
+
+- git 仓库在所有标签上提供 PGP 签名
+- tarball 为所有下载提供独立的 PGP 签名
+
+信任开发者，不要信基础设施
+--------------------------
+
+自从 2011 年 kernel.org 核心系统遭到入侵以来，内核存档项目的主要运行原
+则就是假定基础设施的任何部分都可能随时受到入侵。因此，管理员特意采取措施，
+强调必须始终信任开发者，不能信任代码托管基础设施，无论后者的安全实践有多好。
+
+上述指导原则正是需要本指南的原因。希望确保通过对开发者的信任，我们不会简
+单地将未来潜在安全事件的责任归咎于其他人。目的是提供一套指导开发者可以用
+来创建安全的工作环境并保护用于建立 Linux 内核本身完整性的 PGP 密钥。
+
+PGP 工具
+========
+
+使用 GnuPG 2.2 或更高版本
+-------------------------
+
+默认情况下，你的发行版应该已经安装了 GnuPG，你只需要验证你使用的是相当新的
+版本即可。要检查，请运行::
+
+    $ gpg --version | head -n1
+
+如果你有 2.2 或更高版本，那么你就可以开始了。如果你的版本早于 2.2，则本指
+南中的某些命令可能不起作用。
+
+配置 gpg-agent 选项
+~~~~~~~~~~~~~~~~~~~
+
+GnuPG agent是一个辅助工具，每当你使用该命令时，它都会自动启动gpg，并在
+后台运行，目的是缓存私钥密码。你应该知道两个选项，以便调整密码何时从缓存
+过期:
+
+- ``default-cache-ttl`` (秒): 如果在生命周期结束之前再次使用相同的
+  密钥，倒计时将重置为另一段时间。默认值为 600（10 分钟）。
+- ``max-cache-ttl`` (秒): 无论你自输入初始密码以来多久使用过密钥，
+  如果最大生存时间倒计时结束，你都必须再次输入密码。默认值为 30 分钟。
+
+如果你发现这些默认值太短（或太长），你可以编辑 ``~/.gnupg/gpg-agent.conf``
+文件以设置你自己的值::
+
+    # 常规ttl设置为30分钟，最大ttl设置为2小时
+    default-cache-ttl 1800
+    max-cache-ttl 7200
+
+.. note::
+
+    不需要在 shell 会话开始时手动启动 gpg-agent。你可能需要检查
+    rc 文件来删除旧版本 GnuPG 中的所有内容，因为它可能不再做正确
+    的事情。
+
+保护你的 PGP 密钥
+=================
+
+本指南假定你已经拥有用于 Linux 内核开发目的的 PGP 密钥。如果你还没
+有，请参阅前面提到的 "`保护代码完整性`_" 文档，以获取有关如何创建新
+密钥的指导。
+
+如果你当前的密钥低于 2048 位 (RSA)，你还应该创建一个新密钥。
+
+了解 PGP 子密钥
+---------------
+
+PGP 密钥很少由单个密钥对组成 - 通常它是独立子密钥的集合，这些子密钥
+可根据其功能用于不同的目的，并在创建时分配。PGP 定义了密钥可以具有的
+四种功能:
+
+- **[S]** 密钥可用于签名
+- **[E]** 密钥可用于加密
+- **[A]** 密钥可用于身份验证
+- **[C]** 密钥可用于验证其他密钥
+
+具有 **[C]** 功能的密钥通常称为“主”密钥，但该术语具有误导性，因为
+它意味着可以使用Certify密钥来代替同一链上的任何其他子密钥（如物理
+“主密钥”可用于打开为其他钥匙制作的锁）。由于情况并非如此，本指南将
+其称为“认证密钥”以避免任何歧义。
+
+充分理解以下内容至关重要:
+
+1. 所有子项彼此完全独立。如果你丢失了私有子密钥，则无法从链上的任何
+   其他私钥恢复或重新创建它。
+2. 除 Certify 密钥外，可以有多个具有相同功能的子密钥（例如，你可
+   以有 2 个有效的加密子密钥、3 个有效的签名子密钥，但只有 1 个有
+   效的认证子密钥）。所有子密钥都是完全独立的——加密到一个 **[E]**
+   子密钥的信息（messages）无法使用你可能拥有的任何其他 **[E]**
+   子密钥解密。
+3. 单个子密钥可能具有多种功能（例如，你的 **[C]** 密钥也可以是你
+   的 **[S]** 密钥）。
+
+携带 **[C]** （证明）能力的密钥是唯一可以用来指示与其他密钥的关系
+的密钥。仅 **[C]** 密钥可用于:
+
+- 添加或撤销具有 S/E/A 功能的其他密钥（子密钥）
+- 添加、更改或撤销与密钥关联的身份 (uid)
+- 添加或更改其本身或任何子密钥的到期日期
+- 出于信任网络的目的签署其他人的密钥
+
+默认情况下，GnuPG 在生成新密钥时创建以下内容:
+
+- 一个子密钥同时具有认证和签名功能 (**[SC]**)
+- 具有加密功能的单独子密钥 (**[E]**)
+
+如果你在生成密钥时使用了默认参数，那么这就是你将得到的。你可以通过
+运行命令来验证，例如： ``gpg --list-secret-keys``
+
+::
+
+    sec   ed25519 2022-12-20 [SC] [expires: 2024-12-19]
+          000000000000000000000000AAAABBBBCCCCDDDD
+    uid           [ultimate] Alice Dev <adev@kernel.org>
+    ssb   cv25519 2022-12-20 [E] [expires: 2024-12-19]
+
+在 ``sec`` 这行下面长长的一行就是你的密钥指纹-无论在下文任何地方
+看到 ``[fpr]`` 都指的是这40个字符。
+
+确保你的密码强度高
+------------------
+
+GnuPG 在将私钥存储到磁盘之前使用密码对其进行加密。这样，即使你的
+``.gnupg`` 目录全部泄露或被盗，攻击者在没有事先获取密码来解密的
+情况下也无法使用你的私钥。
+
+你的私钥受到强密码保护是绝对必要的。要设置或更改它，请使用::
+
+    $ gpg --change-passphrase [fpr]
+
+创建一个单独的签名子密钥
+------------------------
+
+我们的目的是通过将你的证书密钥移动到离线媒介来保护它，因此如果你只
+有组合的 **[SC]** 密钥，那么你应该创建一个单独的签名子密钥::
+
+    $ gpg --quick-addkey [fpr] ed25519 sign
+
+.. note:: GnuPG 中的 ECC 支持
+
+    请注意，如果你打算使用不支持 ED25519 ECC 密钥的硬件密钥，则
+    应选择“nistp256”或“ed25519”。请参阅下面有关推荐硬件设备的
+    部分。
+
+
+备份你的证书密钥以进行灾难恢复
+------------------------------
+
+你的 PGP 密钥上来自其他开发者的签名越多，出于灾难恢复的原因，你就越
+有理由创建一个位于数字媒体之外的备份版本。
+
+创建私钥的可打印硬拷贝的最佳方法是使用 ``paperkey`` 为此目的编写
+的软件。有关输出格式及其相对于其他解决方案的优势的更多详细信息，请参
+阅 ``paperkey`` 参考资料。大多数发行版都应该已经打包了 Paperkey。
+
+运行以下命令来创建私钥的硬拷贝备份::
+
+    $ gpg --export-secret-key [fpr] | paperkey -o /tmp/key-backup.txt
+
+打印出该文件（或将输出直接传输到 lpr），然后用笔在纸的边缘写下你的密
+码。 **强烈建议这样做**，因为密钥打印输出仍然使用该密码进行加密，并且
+如果你更改了它，你将不记得创建备份时它曾经是什么 - *保证*。
+
+将生成的打印输出和手写密码放入信封中，并存放在安全且受到良好保护的地
+方，最好远离你的家，例如银行保险柜。
+
+.. note::
+
+    你的打印机可能不再是连接到并行端口的简单哑设备，但由于输出仍然使
+    用你的密码进行加密，因此即使“云端打印”的现代打印机也应该保持相
+    对安全的操作
+
+备份整个 GnuPG 目录
+-------------------
+
+.. warning::
+
+    **!!!不要跳过这个步骤!!!**
+
+如果你需要恢复 PGP 密钥，拥有一个随时可用的备份非常重要。这与我们
+所做的灾难级准备不同 ``paperkey`` 。每当你需要使用你的证书密钥时，
+例如在会议和峰会后更改你自己的密钥或签署其他人的密钥时，你还将依赖
+这些外部副本。
+
+首先获取一个小型 USB “拇指” 驱动器（最好是两个！），用于备份目的。
+你需要使用 LUKS 对其进行加密——请参阅你的发行版文档以了解如何完成
+此操作。
+
+对于加密密码，你可以使用与 PGP 密钥相同的密码。
+
+加密过程完成后，重新插入 USB 驱动器并确保其正确安装。将整个 ``.gnupg``
+目录复制到加密存储::
+
+    $ cp -a ~/.gnupg /media/disk/foo/gnupg-backup
+
+你现在应该测试一下，确保一切依然能正常工作::
+
+    $ gpg --homedir=/media/disk/foo/gnupg-backup --list-key [fpr]
+
+如果没有出现任何错误，那么就可以开始了。卸下 USB 驱动器，给它贴上
+明显的标签，这样下次需要使用随机 USB 驱动器时就不会把它吹走，然后
+放在安全的地方 - 但不要太远，因为你每次都需要使用它时不时地用于诸
+如编辑身份、添加或撤销子密钥或签署其他人的密钥之类的事情。
+
+从你的 homedir 中删除 Certify 密钥
+----------------------------------
+
+我们的主目录中的文件并没有我们想象的那么受到保护。它们可以通过多种
+不同的方式泄露或被盗:
+
+- 在制作快速主目录备份以设置新工作站时意外发生
+- 系统管理员的疏忽或恶意
+- 通过不安全的备份
+- 通过桌面应用程序（浏览器、pdf 查看器等）中的恶意软件
+- 跨越国界时通过胁迫
+
+使用良好的密码短语保护你的密钥极大地有助于降低上述任何风险，但密码
+短语可以通过键盘记录器、肩窥或任何其他方式发现。因此，建议的设置是
+从主目录中删除你的证书密钥并将其存储在离线存储中。
+
+.. warning::
+
+    请参阅上一节并确保你已完整备份 GnuPG 目录。如果你没有可用的
+    备份，我们要做的事情将使你的密钥毫无用处！
+
+首先，确定你的证书密钥的keygrip::
+
+    $ gpg --with-keygrip --list-key [fpr]
+
+输出将是这样的::
+
+    pub   ed25519 2022-12-20 [SC] [expires: 2022-12-19]
+          000000000000000000000000AAAABBBBCCCCDDDD
+          Keygrip = 1111000000000000000000000000000000000000
+    uid           [ultimate] Alice Dev <adev@kernel.org>
+    sub   cv25519 2022-12-20 [E] [expires: 2022-12-19]
+          Keygrip = 2222000000000000000000000000000000000000
+    sub   ed25519 2022-12-20 [S]
+          Keygrip = 3333000000000000000000000000000000000000
+
+找到该线 ``pub`` 下方的keygrip项 （位于“认证密钥指纹”的正下方）。
+这将直接对应于你``~/.gnupg`` 目录中的一个文件::
+
+    $ cd ~/.gnupg/private-keys-v1.d
+    $ ls
+    1111000000000000000000000000000000000000.key
+    2222000000000000000000000000000000000000.key
+    3333000000000000000000000000000000000000.key
+
+你所要做的只是删除与证书密钥 keygrip 对应的 .key 文件::
+
+    $ cd ~/.gnupg/private-keys-v1.d
+    $ rm 1111000000000000000000000000000000000000.key
+
+现在，如果你发出命令 ``--list-secret-keys`` ，它将显示证书密钥丢
+失（ 表示 ``#`` 它不可用）::
+
+    $ gpg --list-secret-keys
+    sec#  ed25519 2022-12-20 [SC] [expires: 2024-12-19]
+          000000000000000000000000AAAABBBBCCCCDDDD
+    uid           [ultimate] Alice Dev <adev@kernel.org>
+    ssb   cv25519 2022-12-20 [E] [expires: 2024-12-19]
+    ssb   ed25519 2022-12-20 [S]
+
+你还应该删除 ``~/.gnupg``目录中的所有 ``secring.gpg`` 文件 ，这些
+文件可能是以前版本的 GnuPG 留下的。
+
+如果你没有“private-keys-v1.d”目录
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+如果你没有 ``~/.gnupg/private-keys-v1.d`` 目录，那么你的密钥仍存
+储在 GnuPG v1 使用的旧文件 ``secring.gpg`` 中。对密钥进行任何更改
+（例如更改密码或添加子密钥）应该会自动转换旧 ``secring.gpg`` 格式以
+供使用 ``private-keys-v1.d`` 。
+
+完成此操作后，请确保删除过时的 ``secring.gpg`` 文件，其中仍然包含你
+的私钥。
+
+
+将子密钥移至专用加密设备
+========================
+
+尽管 Certify 密钥现在不会被泄露或被盗，但子密钥仍然位于你的主目录中。
+任何设法获得这些内容的人都将能够解密你的通信或伪造你的签名（如果他们知
+道密码）。此外，每次执行 GnuPG 操作时，密钥都会加载到系统内存中，并
+可能被足够高级的恶意软件（例如 Meltdown 和 Spectre）从那里窃取。
+
+完全保护密钥的最佳方法是将它们转移到能够进行智能卡操作的专用硬件设备上。
+
+智能卡的好处
+------------
+
+智能卡包含一个加密芯片，能够存储私钥并直接在卡本身上执行加密操作。由于
+密钥内容永远不会离开智能卡，因此插入硬件设备的计算机的操作系统无法自行
+检索私钥。这与我们之前用于备份目的的加密 USB 存储设备有很大不同——当
+USB 设备插入并安装时，操作系统能够访问私钥内容。
+
+使用外部加密 USB 介质并不能替代具有智能卡功能的设备。
+
+可用的智能卡设备
+----------------
+
+除非你的所有笔记本电脑和工作站都有智能卡读卡器，否则最简单的方法是获
+取实现智能卡功能的专用 USB 设备。有多种选择：:
+
+- `Nitrokey Start`_: 开放硬件和免费软件，日本基于FSI的 `Gnuk` 。
+  少数支持 ED25519 ECC 密钥的商用设备之一，但提供的安全功能最少
+  （例如防篡改或某些旁路攻击）。
+- `Nitrokey Pro 2`_: 与 Nitrokey Start 类似，但更防篡改并提供
+  更多安全功能。Pro 2 支持 ECC 加密 (NISTP)。
+- `Yubikey 5`_: 专有硬件和软件，但比 Nitrokey Pro 便宜，并且以
+  USB-C 形式提供，对于较新的笔记本电脑更有用。提供额外的安全功能，
+  例如 FIDO U2F 等，现在终于支持 NISTP 和 ED25519 ECC 密钥。
+
+你的选择将取决于成本、你所在地理区域的货运便利性以及开放/专有硬件考虑
+因素。
+
+.. note::
+
+    如果你位列于 MAINTAINERS 中或在 kernel.org 上拥有帐户，则你有
+    资格获得Linux 基金会提供的_`qualify for a free Nitrokey Start` 。
+
+.. _`Nitrokey Start`: https://shop.nitrokey.com/shop/product/nitrokey-start-6
+.. _`Nitrokey Pro 2`: https://shop.nitrokey.com/shop/product/nkpr2-nitrokey-pro-2-3
+.. _`Yubikey 5`: https://www.yubico.com/products/yubikey-5-overview/
+.. _Gnuk: https://www.fsij.org/doc-gnuk/
+.. _`qualify for a free Nitrokey Start`: https://www.kernel.org/nitrokey-digital-tokens-for-kernel-developers.html
+
+配置你的智能卡设备
+------------------
+
+当你将智能卡设备插入任何现代 Linux 工作站时，它就应该可以正常工作
+(TM)。你可以通过运行来验证它::
+
+    $ gpg --card-status
+
+如果你看到完整的智能卡详细信息，那么你就可以开始了。不幸的是，对所有
+可能无法正常工作的原因进行故障排除超出了本指南的范围。如果你在使该卡
+与 GnuPG 配合使用时遇到问题，请通过常规支持渠道寻求帮助。
+
+要配置你的智能卡，你需要使用 GnuPG 菜单系统，因为没有方便的命令行开
+关::
+
+    $ gpg --card-edit
+    [...omitted...]
+    gpg/card> admin
+    Admin commands are allowed
+    gpg/card> passwd
+
+你应该设置用户 PIN (1)、管理员 PIN (3) 和重置代码 (4)。请确保将
+这些信息记录并存储在安全的地方，尤其是管理员 PIN 码和重置代码（它允
+许你完全擦除智能卡）。你很少需要使用管理员 PIN 码，如果你不记录它，
+你将不可避免地忘记它是什么。
+
+回到主卡菜单，你还可以设置其他值（例如姓名、性别、登录数据等），但这
+不是必需的，并且如果你丢失智能卡，还会泄露有关智能卡的信息。
+
+.. note::
+
+    尽管名称为“PIN”，但卡上的用户 PIN 和管理员 PIN 都不需要是数字。
+
+.. warning::
+
+    某些设备可能要求你将子密钥移至设备上，然后才能更改密码。请检查设
+    备制造商提供的文档。
+
+将子密钥移至你的智能卡
+----------------------
+
+退出卡菜单（使用“q”）并保存所有更改。接下来，让我们将子密钥移至智能卡
+上。对于大多数操作，你将需要 PGP 密钥密码和卡的管理员 PIN::
+
+    $ gpg --edit-key [fpr]
+
+    Secret subkeys are available.
+
+    pub  ed25519/AAAABBBBCCCCDDDD
+         created: 2022-12-20  expires: 2024-12-19  usage: SC
+         trust: ultimate      validity: ultimate
+    ssb  cv25519/1111222233334444
+         created: 2022-12-20  expires: never       usage: E
+    ssb  ed25519/5555666677778888
+         created: 2017-12-07  expires: never       usage: S
+    [ultimate] (1). Alice Dev <adev@kernel.org>
+
+    gpg>
+
+使用 ``--edit-key`` 使我们再次进入菜单模式，你会注意到按键列表有点
+不同。从现在开始，所有命令都在此菜单模式内完成，如 所示 ``gpg>``。
+
+首先，让我们选择要放入卡上的密钥 - 你可以通过键入 ``key 1`` （它是
+列表中的第一个， **[E]** 子密钥）来完成此操作：
+
+    gpg> key 1
+
+在输出中，你现在在 **[E]** 子密钥应该看到 ``ssb*`` 。意味着这个子
+密钥当前被选中。它用作切换键，这意味着如果你再次输入 ``key 1`` ，
+``*`` 将会消失并且该键将不再被选择。
+
+现在，让我们将该密钥移至智能卡上::
+
+    gpg> keytocard
+    Please select where to store the key:
+       (2) Encryption key
+    Your selection? 2
+
+由于它是我们的 **[E]** 密钥，因此将其放入加密槽中是有意义的。当你提
+交选择时，系统将首先提示你输入 PGP 密钥密码，然后输入管理员 PIN 码。
+如果命令返回且没有错误，则你的密钥已被移动。
+
+**重要提示**：现在再次键入 ``key 1`` 以取消选择第一个键，并 ``key 2``
+选择 **[S]** 密钥::
+
+    gpg> key 1
+    gpg> key 2
+    gpg> keytocard
+    Please select where to store the key:
+       (1) Signature key
+       (3) Authentication key
+    Your selection? 1
+
+你可以使用 **[S]** 密钥进行签名和身份验证，但我们希望确保它位于签名槽中，
+因此选择 (1)。跟之前一样，如果你的命令返回且没有错误，则操作成功::
+
+    gpg> q
+    Save changes? (y/N) y
+
+保存更改将删除你从主目录移动到卡上的密钥（但这没关系，因为我们还有备份，
+让我们需要替换智能卡时再次执行此操作）。
+
+验证密钥是否已移动
+~~~~~~~~~~~~~~~~~~
+
+如果你现在执行 ``--list-secret-keys`` ，你将看到输出中存在细微的差异::
+
+    $ gpg --list-secret-keys
+    sec#  ed25519 2022-12-20 [SC] [expires: 2024-12-19]
+          000000000000000000000000AAAABBBBCCCCDDDD
+    uid           [ultimate] Alice Dev <adev@kernel.org>
+    ssb>  cv25519 2022-12-20 [E] [expires: 2024-12-19]
+    ssb>  ed25519 2022-12-20 [S]
+
+在 ``ssb>``中的 ``>`` 输出意味着子密钥只能在智能卡上可用，如果你返回
+密钥目录并查看那里的内容，你会注意到 ``.key`` 那里的文件已被存根替换::
+
+    $ cd ~/.gnupg/private-keys-v1.d
+    $ strings *.key | grep 'private-key'
+
+输出应包含 ``shadowed-private-key`` 指示这些文件只是存根，实际内容
+位于智能卡上。
+
+验证智能卡是否正常工作
+~~~~~~~~~~~~~~~~~~~~~~
+
+要验证智能卡是否按预期工作，你可以创建签名::
+
+    $ echo "Hello world" | gpg --clearsign > /tmp/test.asc
+    $ gpg --verify /tmp/test.asc
+
+在你的第一条命令执行时，应该会询问你智能卡的PIN，然后在你运行
+``gpg --verify`` 后显示"Good signature"。
+
+恭喜，你已成功使窃取你的数字开发者身份变得极其困难！
+
+其他常见的 GnuPG 操作
+---------------------
+
+以下是你需要使用 PGP 密钥执行的一些常见操作的快速参考。
+
+安装你的安全离线存储
+~~~~~~~~~~~~~~~~~~~~
+
+你将需要你的证书密钥来执行以下任何操作，因此你首先需要安装备份离线存储
+并告诉 GnuPG 使用它::
+
+    $ export GNUPGHOME=/media/disk/foo/gnupg-backup
+    $ gpg --list-secret-keys
+
+你需要确保你看到 ``sec`` 而不是 ``sec#`` 在输出中（ ``#`` 意味着
+密钥不可用并且你仍在使用常规主目录位置）。
+
+延长密钥有效期
+~~~~~~~~~~~~~~
+
+证书密钥的默认到期日期为自创建之日起 2 年。这样做既是出于安全原因，也
+是为了使过时的密钥最终从密钥服务器中消失。
+
+要将密钥的有效期从当前日期延长一年，只需运行::
+
+    $ gpg --quick-set-expire [fpr] 1y
+
+如果更容易记住，你也可以使用特定日期（例如你的生日、1 月 1 日或加拿大
+国庆日）::
+
+    $ gpg --quick-set-expire [fpr] 2025-07-01
+
+请记住将更新后的密钥发送回密钥服务器::
+
+    $ gpg --send-key [fpr]
+
+进行任何更改后更新你的工作目录
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+使用离线存储对密钥进行任何更改后，你需要将这些更改导入回常规工作目录
+中::
+
+    $ gpg --export | gpg --homedir ~/.gnupg --import
+    $ unset GNUPGHOME
+
+通过 ssh 使用 gpg-agent
+~~~~~~~~~~~~~~~~~~~~~~~
+
+如果你需要在远程系统上签署标签或提交，你可以通过 ssh 转发你的
+gpg-agent。
+
+请参考 GnuPG wiki 上提供的说明:
+
+- `Agent通过SSH转发`_
+
+如果你可以修改远程端的 sshd 服务器设置，则工作会更顺利。
+
+.. _`Agent通过SSH转发`: https://wiki.gnupg.org/AgentForwarding
+
+将 PGP 与 Git 结合使用
+======================
+
+Git 的核心功能之一是它的分散性——一旦将仓库克隆到你的系统，你就拥有该
+项目的完整历史记录，包括其所有标签、提交和分支。然而，随着数百个克隆仓
+库的出现，人们如何验证他们的 linux.git 副本没有被恶意第三方篡改？
+
+或者，如果在代码中发现后门，并且提交中的“Author”行表示它是由你完成的，
+而你非常确定 `自己与它无关`_ ，会发生什么？
+
+为了解决这两个问题，Git 引入了 PGP 集成。签名的标签通过确保其内容与创
+建标签的开发人员的工作站上的内容完全相同来证明仓库的完整性，而签名的提
+交使其他人几乎不可能在无法访问你的 PGP 密钥的情况下冒充你。
+
+.. _`自己与它无关`: https://github.com/jayphelps/git-blame-someone-else
+
+配置 git 使用你的 PGP 密钥
+--------------------------
+
+如果你的密钥环中只有一个密钥，那么你实际上不需要执行任何额外操作，因为
+它会成为你的默认密钥。但是，如果你碰巧有多个密钥，你可以告诉 git 应该
+使用哪个密钥（``[fpr]`` 是你密钥的指纹）::
+
+    $ git config --global user.signingKey [fpr]
+
+如何使用签名标签
+----------------
+
+要创建签名标签，只需将 ``-s`` 开关传递给 tag 命令::
+
+    $ git tag -s [tagname]
+
+我们的建议是始终签署 git 标签，因为这可以让其他开发人员确保他们从中提
+取的 git 仓库没有被恶意更改。
+
+如何验证签名标签
+~~~~~~~~~~~~~~~~
+
+要验证签名标签，只需使用以下 ``verify-tag`` 命令::
+
+    $ git verify-tag [tagname]
+
+如果你从项目仓库的另一个分支中拉取标签，git 应该自动验证你拉取的顶
+部的签名，并在合并操作期间向你显示结果::
+
+    $ git pull [url] tags/sometag
+
+合并消息将包含如下内容::
+
+    Merge tag 'sometag' of [url]
+
+    [Tag message]
+
+    # gpg: Signature made [...]
+    # gpg: Good signature from [...]
+
+如果你正在验证其他人的 git 标签，那么你将需要导入他们的 PGP 密钥。
+请参阅下面的":ref:`身份验证`"部分。
+
+配置 git 始终对带注释的标签（annotated tags）进行签名annotated tags
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+如果你要创建带注释的标签，你很可能会想要对其进行签名。要强制 git 始终签
+署带注释的标签，你可以设置一个全局配置选项::
+
+    $ git config --global tag.forceSignAnnotated true
+
+如何使用签名的提交
+------------------
+
+创建签名提交很容易，但在 Linux 内核开发中使用它们要困难得多，因为它依赖
+于发送到邮件列表的补丁，并且此工作流程不保留 PGP 提交签名。此外，当重新
+调整仓库以匹配上游时，甚至你自己的 PGP 提交签名最终也会被丢弃。因此，大
+多数内核开发人员不会费心签署他们的提交，并且会忽略他们在工作中依赖的任何
+外部仓库中的签名提交。
+
+但是，如果你的工作 git 树在某些 git 托管服务（kernel.org、
+infradead.org、ozlabs.org 或其他）上公开可用，那么建议你签署所有 git
+提交，即使上游开发人员不直接受益于这种做法。
+
+我们推荐这样做的原因如下:
+
+1. 如果需要执行代码取证或跟踪代码来源，即使是外部维护的带有 PGP 提交签名
+   的树对于此类问题也很有价值。
+2. 如果你需要重新克隆本地仓库（例如，在磁盘故障后），这可以让你在恢复工
+   作之前轻松验证仓库的完整性。
+3. 如果有人需要挑选你的提交，这可以让他们在应用之前快速验证其完整性。
+
+创建签名提交
+~~~~~~~~~~~~
+
+要创建签名提交，你只需将 ``-S`` 标志传递给 ``git commit`` 命令（由于
+与另一个标志冲突，所以它是大写的 ``-S`` ）::
+
+    $ git commit -S
+
+配置 git 始终对提交进行签名
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+你可以告诉 git 总是签署提交::
+
+    git config --global commit.gpgSign true
+
+.. note::
+
+    确保 ``gpg-agent`` 在打开此功能之前进行配置。
+
+.. _身份验证:
+
+
+如何使用签名补丁
+----------------
+
+可以使用你的 PGP 密钥来签署发送到内核开发人员邮件列表的补丁。由于现有的
+电子邮件签名机制（PGP-Mime 或 PGP-inline）往往会导致常规代码审查任务
+出现问题，因此你应该使用为此创建的 kernel.org 工具，该工具将加密证明签
+名放入消息标头中（a-la DKIM）:
+
+- `Patatt Patch Attestation`_
+
+.. _`Patatt Patch Attestation`: https://pypi.org/project/patatt/
+
+安装和配置 patatt
+~~~~~~~~~~~~~~~~~
+
+Patatt 已针对许多发行版进行了打包，因此请先检查那里。你还可以使用
+“ ``pip install patatt`` ”从 pypi 安装它。
+
+如果你已经使用 git 配置了 PGP 密钥（通过``user.signingKey`` 配置参数），
+则 patatt 不需要进一步配置。你可以通过在所需的仓库中安装 git-send-email
+钩子来开始签署补丁::
+
+    patatt install-hook
+
+现在，你使用 ``git send-email`` 发送的任何补丁都将自动使用你的加密签
+名进行签名
+
+检查 patatt 签名
+~~~~~~~~~~~~~~~~
+
+如果你用于 ``b4`` 检索和应用补丁，那么它将自动尝试验证它遇到的所有
+DKIM 和 patatt 签名，例如::
+
+    $ b4 am 20220720205013.890942-1-broonie@kernel.org
+    [...]
+    Checking attestation on all messages, may take a moment...
+    ---
+      ✓ [PATCH v1 1/3] kselftest/arm64: Correct buffer allocation for SVE Z registers
+      ✓ [PATCH v1 2/3] arm64/sve: Document our actual ABI for clearing registers on syscall
+      ✓ [PATCH v1 3/3] kselftest/arm64: Enforce actual ABI for SVE syscalls
+      ---
+      ✓ Signed: openpgp/broonie@kernel.org
+      ✓ Signed: DKIM/kernel.org
+
+.. note::
+
+    Patatt 和 b4 仍在积极开发中，你应该检查这些项目的最新文档以了解任
+    何新功能或更新功能。
+
+如何验证内核开发者身份
+======================
+
+签署标签和提交很容易，但是如何验证用于签署某项内容的密钥是否属于实际的内
+核开发人员而不是恶意冒名顶替者？
+
+使用 WKD 和 DANE 配置auto-key-locate（自动密钥检索）
+----------------------------------------------------
+
+如果你还没有广泛收集其他开发人员的公钥，那么你可以依靠密钥自动发现和自动
+检索来快速启动你的密钥环。如果从头开始创建自己的信任 Web 的预期太令人畏
+惧， GnuPG 可以借助其他委托信任技术（即 DNSSEC 和 TLS）来帮助你继续前
+进。
+
+将以下内容添加到你的 ``~/.gnupg/gpg.conf``::
+
+    auto-key-locate wkd,dane,local
+    auto-key-retrieve
+
+基于 DNS 的命名实体身份验证（“DANE”）是一种在 DNS 中发布公钥并使用
+DNSSEC 签名区域保护它们的方法。Web 密钥目录（“WKD”）是使用 https
+查找来达到相同目的的替代方法。当使用 DANE 或 WKD 查找公钥时，GnuPG
+将分别验证 DNSSEC 或 TLS 证书，然后将自动检索的公钥添加到本地密钥环。
+
+Kernel.org 为所有拥有 kernel.org 帐户的开发人员发布 WKD。一旦你的
+``gpg.conf`` 中进行了上述更改，你就可以自动检索 Linus Torvalds 和
+Greg Kroah-Hartman 的密钥（如果你还没有它们）::
+
+    $ gpg --locate-keys torvalds@kernel.org gregkh@kernel.org
+
+如果你有 kernel.org 帐户，那么你应该 `添加 kernel.org UID 到你的密钥中`_
+添加到你的密钥中，以使 WKD 对其他内核开发人员更有用。
+
+.. _`添加 kernel.org UID 到你的密钥中`: https://korg.wiki.kernel.org/userdoc/mail#adding_a_kernelorg_uid_to_your_pgp_key
+
+信任网 (WOT) 与首次使用信任 (TOFU)
+-----------------------------------
+
+PGP 结合了称为“信任网”的信任委托机制。从本质上讲，这是一次尝试取代
+HTTPS/TLS 世界对集中式证书颁发机构的需求。PGP 将这一责任留给每个
+用户，而不是由各种软件制造商规定谁应该是你值得信赖的认证实体。
+
+不幸的是，很少有人了解信任网是如何运作的。虽然它仍然是 OpenPGP 规
+范的一个重要方面，但最新版本的 GnuPG（2.2 及更高版本）已经实现了
+一种称为“首次使用信任”(TOFU) 的替代机制。你可以将 TOFU 视为“类似
+SSH 的信任方法”。使用 SSH，第一次连接到远程系统时，其密钥指纹会被
+记录并记住。如果将来密钥发生变化，SSH 客户端将向你发出警报并拒绝连
+接，迫使你决定是否选择信任更改后的密钥。同样，第一次导入某人的 PGP
+密钥时，它被认为是有效的。如果将来的任何时候 GnuPG 遇到具有相同标
+识的另一个密钥，则先前导入的密钥和新密钥都将被标记为无效，你将需要手
+动确定保留哪一个。
+
+我们建议你使用 TOFU+PGP 组合信任模型（这是 GnuPG v2 中新默认的）。
+若要设置它，在 ``~/.gnupg/gpg.conf`` 中添加（或修改）
+``trust-model`` 设置::
+
+    trust-model tofu+pgp
+
+使用 kernel.org 信任网仓库
+--------------------------
+
+Kernel.org 维护着一个包含开发人员公钥的 git 仓库，作为复制密钥服
+务器网络的替代品，而在过去几年中，该网络几乎已经陷入黑暗。有关如何将
+该仓库设置为公钥来源的完整文档可以在此处找到:
+
+- `内核开发者密钥环`_
+
+如果你是内核开发人员，请考虑提交你的密钥以将其包含到该密钥环中。
+
+.. _`内核开发者密钥环`: https://korg.docs.kernel.org/pgpkeys.html
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/process/submit-checklist.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/submit-checklist.rst
index 3d6ee21c74ae..10536b74aeec 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/process/submit-checklist.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/submit-checklist.rst
@@ -53,8 +53,7 @@ Linux内核补丁提交检查单
 9) 通过 sparse 清查。
    （参见 Documentation/translations/zh_CN/dev-tools/sparse.rst ）
 
-10) 使用 ``make checkstack`` 和 ``make namespacecheck`` 并修复他们发现的任何
-    问题。
+10) 使用 ``make checkstack`` 并修复他们发现的任何问题。
 
     .. note::
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/scheduler/sched-design-CFS.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/scheduler/sched-design-CFS.rst
index 3076402406c4..abc6709ec3b2 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/scheduler/sched-design-CFS.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/scheduler/sched-design-CFS.rst
@@ -80,7 +80,7 @@ p->se.vruntime。一旦p->se.vruntime变得足够大，其它的任务将成为
 CFS使用纳秒粒度的计时，不依赖于任何jiffies或HZ的细节。因此CFS并不像之前的调度器那样
 有“时间片”的概念，也没有任何启发式的设计。唯一可调的参数（你需要打开CONFIG_SCHED_DEBUG）是：
 
-   /sys/kernel/debug/sched/min_granularity_ns
+   /sys/kernel/debug/sched/base_slice_ns
 
 它可以用来将调度器从“桌面”模式（也就是低时延）调节为“服务器”（也就是高批处理）模式。
 它的默认设置是适合桌面的工作负载。SCHED_BATCH也被CFS调度器模块处理。
@@ -147,7 +147,7 @@ array）。
    这个函数的行为基本上是出队，紧接着入队，除非compat_yield sysctl被开启。在那种情况下，
    它将调度实体放在红黑树的最右端。
 
- - check_preempt_curr(...)
+ - wakeup_preempt(...)
 
    这个函数检查进入可运行状态的任务能否抢占当前正在运行的任务。
 
@@ -155,9 +155,9 @@ array）。
 
    这个函数选择接下来最适合运行的任务。
 
- - set_curr_task(...)
+ - set_next_task(...)
 
-   这个函数在任务改变调度类或改变任务组时被调用。
+   这个函数在任务改变调度类，改变任务组时，或者任务被调度时被调用。
 
  - task_tick(...)
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/scheduler/schedutil.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/scheduler/schedutil.rst
index d1ea68007520..7c8d87f21c42 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/scheduler/schedutil.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/scheduler/schedutil.rst
@@ -89,16 +89,15 @@ r_cpu被定义为当前CPU的最高性能水平与系统中任何其它CPU的最
  - Documentation/translations/zh_CN/scheduler/sched-capacity.rst:"1. CPU Capacity + 2. Task utilization"
 
 
-UTIL_EST / UTIL_EST_FASTUP
-==========================
+UTIL_EST
+========
 
 由于周期性任务的平均数在睡眠时会衰减，而在运行时其预期利用率会和睡眠前相同，
 因此它们在再次运行后会面临（DVFS）的上涨。
 
 为了缓解这个问题，（一个默认使能的编译选项）UTIL_EST驱动一个无限脉冲响应
 （Infinite Impulse Response，IIR）的EWMA，“运行”值在出队时是最高的。
-另一个默认使能的编译选项UTIL_EST_FASTUP修改了IIR滤波器，使其允许立即增加，
-仅在利用率下降时衰减。
+UTIL_EST滤波使其在遇到更高值时立刻增加，而遇到低值时会缓慢衰减。
 
 进一步，运行队列的（可运行任务的）利用率之和由下式计算：
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_CN/userspace-api/index.rst linux-libre-6.8-gnu/Documentation/translations/zh_CN/userspace-api/index.rst
index 5dc0f2e69c17..5b14721c8264 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_CN/userspace-api/index.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_CN/userspace-api/index.rst
@@ -17,11 +17,8 @@ Linux 内核用户空间API指南
 在代码树中仍然可以找到有关用户空间的部分信息。这个手册意在成为这些信息
 聚集的地方。
 
-.. class:: toc-title
-
-	   目录
-
 .. toctree::
+   :caption: 目录
    :maxdepth: 2
 
    no_new_privs
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/IRQ.txt linux-libre-6.8-gnu/Documentation/translations/zh_TW/IRQ.txt
index fd78ca720298..8115a7618307 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/IRQ.txt
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/IRQ.txt
@@ -7,7 +7,7 @@ help.  Contact the Chinese maintainer if this translation is outdated
 or if there is a problem with the translation.
 
 Maintainer: Eric W. Biederman <ebiederman@xmission.com>
-Traditional Chinese maintainer: Hu Haowen <src.res.211@gmail.com>
+Traditional Chinese maintainer: Hu Haowen <2023002089@link.tyut.edu.cn>
 ---------------------------------------------------------------------
 Documentation/core-api/irq/index.rst 的繁體中文翻譯
 
@@ -16,9 +16,9 @@ Documentation/core-api/irq/index.rst 的繁體中文翻譯
 者翻譯存在問題，請聯繫繁體中文版維護者。
 
 英文版維護者： Eric W. Biederman <ebiederman@xmission.com>
-繁體中文版維護者： 胡皓文 Hu Haowen <src.res.211@gmail.com>
-繁體中文版翻譯者： 胡皓文 Hu Haowen <src.res.211@gmail.com>
-繁體中文版校譯者： 胡皓文 Hu Haowen <src.res.211@gmail.com>
+繁體中文版維護者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
+繁體中文版翻譯者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
+繁體中文版校譯者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 
 以下爲正文
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/README.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/README.rst
index 4cb581f5994a..a6e34c200ea3 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/README.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/README.rst
@@ -7,7 +7,7 @@
 :譯者:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 Linux內核6.x版本 <http://kernel.org/>
 =========================================
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/bug-bisect.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/bug-bisect.rst
index 3f10a9f8f223..1efe913b8da0 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/bug-bisect.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/bug-bisect.rst
@@ -7,7 +7,7 @@
 :譯者:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 二分（bisect）缺陷
 +++++++++++++++++++
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/bug-hunting.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/bug-hunting.rst
index 631fd2650929..c139ec99cab1 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/bug-hunting.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/bug-hunting.rst
@@ -7,7 +7,7 @@
 :譯者:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 追蹤缺陷
 =========
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/clearing-warn-once.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/clearing-warn-once.rst
index 6961006b4a2d..a3e82ff9daac 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/clearing-warn-once.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/clearing-warn-once.rst
@@ -2,7 +2,7 @@
 
 .. include:: ../disclaimer-zh_TW.rst
 
-:Translator: 胡皓文 Hu Haowen <src.res.211@gmail.com>
+:Translator: 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 清除 WARN_ONCE
 --------------
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/cpu-load.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/cpu-load.rst
index cc046f3b7ffa..4c25a2105b39 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/cpu-load.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/cpu-load.rst
@@ -2,7 +2,7 @@
 
 .. include:: ../disclaimer-zh_TW.rst
 
-:Translator: 胡皓文 Hu Haowen <src.res.211@gmail.com>
+:Translator: 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 ========
 CPU 負載
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/index.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/index.rst
index aba8939351e0..9335c0e9105d 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/index.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/index.rst
@@ -4,7 +4,7 @@
 
 :Original: :doc:`../../../admin-guide/index`
 :Translator: Alex Shi <alex.shi@linux.alibaba.com>
-             胡皓文 Hu Haowen <src.res.211@gmail.com>
+             胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 Linux 內核用戶和管理員指南
 ==========================
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/init.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/init.rst
index be6e34f5f7fa..4cef1994c650 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/init.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/init.rst
@@ -7,7 +7,7 @@
 :譯者:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 解釋“No working init found.”啓動掛起消息
 =========================================
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/reporting-issues.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/reporting-issues.rst
index fe5a5a07d51a..bc132b25f2ae 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/reporting-issues.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/reporting-issues.rst
@@ -9,7 +9,7 @@
 :譯者:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 
 報告問題
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/security-bugs.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/security-bugs.rst
index c0e9fc247695..cfe1e58e116b 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/security-bugs.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/security-bugs.rst
@@ -7,7 +7,7 @@
 :譯者:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 安全缺陷
 =========
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/tainted-kernels.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/tainted-kernels.rst
index 47629f6b05de..0d8046576d04 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/tainted-kernels.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/tainted-kernels.rst
@@ -7,7 +7,7 @@
 :譯者:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 受污染的內核
 -------------
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/unicode.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/unicode.rst
index a2b48b5d0a64..f43edb2b5ed0 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/admin-guide/unicode.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/unicode.rst
@@ -7,7 +7,7 @@
 :譯者:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 Unicode（統一碼）支持
 ======================
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/amu.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/amu.rst
index 1b451eae2bee..3726c1671ab6 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/amu.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/amu.rst
@@ -5,7 +5,7 @@
 :Original: :ref:`Documentation/arch/arm64/amu.rst <amu_index>`
 
 Translator: Bailu Lin <bailu.lin@vivo.com>
-            Hu Haowen <src.res.211@gmail.com>
+            Hu Haowen <2023002089@link.tyut.edu.cn>
 
 ==================================
 AArch64 Linux 中擴展的活動監控單元
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/booting.txt linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/booting.txt
index be0de91ecebd..f1ac96370ace 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/booting.txt
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/booting.txt
@@ -10,7 +10,7 @@ or if there is a problem with the translation.
 
 M:	Will Deacon <will.deacon@arm.com>
 zh_CN:	Fu Wei <wefu@redhat.com>
-zh_TW:	Hu Haowen <src.res.211@gmail.com>
+zh_TW:	Hu Haowen <2023002089@link.tyut.edu.cn>
 C:	55f058e7574c3615dea4615573a19bdb258696c6
 ---------------------------------------------------------------------
 Documentation/arch/arm64/booting.rst 的中文翻譯
@@ -23,7 +23,7 @@ Documentation/arch/arm64/booting.rst 的中文翻譯
 中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
 中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
 中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
-繁體中文版校譯者： 胡皓文  Hu Haowen <src.res.211@gmail.com>
+繁體中文版校譯者： 胡皓文  Hu Haowen <2023002089@link.tyut.edu.cn>
 本文翻譯提交時的 Git 檢出點爲： 55f058e7574c3615dea4615573a19bdb258696c6
 
 以下爲正文
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/elf_hwcaps.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/elf_hwcaps.rst
index d2c1c2f23812..cada25303e8d 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/elf_hwcaps.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/elf_hwcaps.rst
@@ -5,7 +5,7 @@
 :Original: :ref:`Documentation/arch/arm64/elf_hwcaps.rst <elf_hwcaps_index>`
 
 Translator: Bailu Lin <bailu.lin@vivo.com>
-            Hu Haowen <src.res.211@gmail.com>
+            Hu Haowen <2023002089@link.tyut.edu.cn>
 
 ================
 ARM64 ELF hwcaps
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/hugetlbpage.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/hugetlbpage.rst
index a17858c978d6..b6849935e028 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/hugetlbpage.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/hugetlbpage.rst
@@ -5,7 +5,7 @@
 :Original: :ref:`Documentation/arch/arm64/hugetlbpage.rst <hugetlbpage_index>`
 
 Translator: Bailu Lin <bailu.lin@vivo.com>
-            Hu Haowen <src.res.211@gmail.com>
+            Hu Haowen <2023002089@link.tyut.edu.cn>
 
 =====================
 ARM64中的 HugeTLBpage
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/index.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/index.rst
index a62b5f06b66c..86014346792e 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/index.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/index.rst
@@ -4,7 +4,7 @@
 
 :Original: :ref:`Documentation/arch/arm64/index.rst <arm64_index>`
 :Translator: Bailu Lin <bailu.lin@vivo.com>
-             Hu Haowen <src.res.211@gmail.com>
+             Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_arm64_index:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/legacy_instructions.txt linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/legacy_instructions.txt
index 7d1f0593d7ca..5c664555a71a 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/legacy_instructions.txt
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/legacy_instructions.txt
@@ -11,7 +11,7 @@ or if there is a problem with the translation.
 Maintainer: Punit Agrawal <punit.agrawal@arm.com>
             Suzuki K. Poulose <suzuki.poulose@arm.com>
 Chinese maintainer: Fu Wei <wefu@redhat.com>
-Traditional Chinese maintainer: Hu Haowen <src.res.211@gmail.com>
+Traditional Chinese maintainer: Hu Haowen <2023002089@link.tyut.edu.cn>
 ---------------------------------------------------------------------
 Documentation/arch/arm64/legacy_instructions.rst 的中文翻譯
 
@@ -26,7 +26,7 @@ Documentation/arch/arm64/legacy_instructions.rst 的中文翻譯
 中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
 中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
 中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
-繁體中文版校譯者：胡皓文  Hu Haowen <src.res.211@gmail.com>
+繁體中文版校譯者：胡皓文  Hu Haowen <2023002089@link.tyut.edu.cn>
 
 以下爲正文
 ---------------------------------------------------------------------
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/memory.txt linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/memory.txt
index e41c518e71c6..6ee2239c293f 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/memory.txt
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/memory.txt
@@ -10,7 +10,7 @@ or if there is a problem with the translation.
 
 Maintainer: Catalin Marinas <catalin.marinas@arm.com>
 Chinese maintainer: Fu Wei <wefu@redhat.com>
-Traditional Chinese maintainer: Hu Haowen <src.res.211@gmail.com>
+Traditional Chinese maintainer: Hu Haowen <2023002089@link.tyut.edu.cn>
 ---------------------------------------------------------------------
 Documentation/arch/arm64/memory.rst 的中文翻譯
 
@@ -24,7 +24,7 @@ Documentation/arch/arm64/memory.rst 的中文翻譯
 中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
 中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
 中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
-繁體中文版校譯者： 胡皓文  Hu Haowen <src.res.211@gmail.com>
+繁體中文版校譯者： 胡皓文  Hu Haowen <2023002089@link.tyut.edu.cn>
 
 以下爲正文
 ---------------------------------------------------------------------
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/perf.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/perf.rst
index 405d5f66964f..ce083ba63872 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/perf.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/perf.rst
@@ -5,7 +5,7 @@
 :Original: :ref:`Documentation/arch/arm64/perf.rst <perf_index>`
 
 Translator: Bailu Lin <bailu.lin@vivo.com>
-            Hu Haowen <src.res.211@gmail.com>
+            Hu Haowen <2023002089@link.tyut.edu.cn>
 
 =============
 Perf 事件屬性
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/silicon-errata.txt linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/silicon-errata.txt
index 70371807ca83..16d73b6c309f 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/silicon-errata.txt
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/silicon-errata.txt
@@ -10,7 +10,7 @@ or if there is a problem with the translation.
 
 M:	Will Deacon <will.deacon@arm.com>
 zh_CN:	Fu Wei <wefu@redhat.com>
-zh_TW:	Hu Haowen <src.res.211@gmail.com>
+zh_TW:	Hu Haowen <2023002089@link.tyut.edu.cn>
 C:	1926e54f115725a9248d0c4c65c22acaf94de4c4
 ---------------------------------------------------------------------
 Documentation/arch/arm64/silicon-errata.rst 的中文翻譯
@@ -23,7 +23,7 @@ Documentation/arch/arm64/silicon-errata.rst 的中文翻譯
 中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
 中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
 中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
-繁體中文版校譯者： 胡皓文  Hu Haowen <src.res.211@gmail.com>
+繁體中文版校譯者： 胡皓文  Hu Haowen <2023002089@link.tyut.edu.cn>
 本文翻譯提交時的 Git 檢出點爲： 1926e54f115725a9248d0c4c65c22acaf94de4c4
 
 以下爲正文
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/tagged-pointers.txt linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/tagged-pointers.txt
index 9812d99549ba..e86ffa893ef6 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/arm64/tagged-pointers.txt
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/arm64/tagged-pointers.txt
@@ -10,7 +10,7 @@ or if there is a problem with the translation.
 
 Maintainer: Will Deacon <will.deacon@arm.com>
 Chinese maintainer: Fu Wei <wefu@redhat.com>
-Traditional Chinese maintainer: Hu Haowen <src.res.211@gmail.com>
+Traditional Chinese maintainer: Hu Haowen <2023002089@link.tyut.edu.cn>
 ---------------------------------------------------------------------
 Documentation/arch/arm64/tagged-pointers.rst 的中文翻譯
 
@@ -22,7 +22,7 @@ Documentation/arch/arm64/tagged-pointers.rst 的中文翻譯
 中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
 中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
 中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
-繁體中文版校譯者： 胡皓文  Hu Haowen <src.res.211@gmail.com>
+繁體中文版校譯者： 胡皓文  Hu Haowen <2023002089@link.tyut.edu.cn>
 
 以下爲正文
 ---------------------------------------------------------------------
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/loongarch/features.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/loongarch/features.rst
index b64e430f55ae..c2175fd32b54 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/loongarch/features.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/loongarch/features.rst
@@ -5,5 +5,5 @@
 :Original: Documentation/arch/loongarch/features.rst
 :Translator: Huacai Chen <chenhuacai@loongson.cn>
 
-.. kernel-feat:: $srctree/Documentation/features loongarch
+.. kernel-feat:: features loongarch
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/mips/features.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/mips/features.rst
index f69410420035..3d3906c4d08e 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/arch/mips/features.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/arch/mips/features.rst
@@ -10,5 +10,5 @@
 
 .. _tw_features:
 
-.. kernel-feat:: $srctree/Documentation/features mips
+.. kernel-feat:: features mips
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/dev-tools/sparse.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/dev-tools/sparse.rst
index 11d64709d6a4..55f0ad2c0beb 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/dev-tools/sparse.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/dev-tools/sparse.rst
@@ -6,19 +6,19 @@ communicating in English you can also ask the Chinese maintainer for
 help.  Contact the Chinese maintainer if this translation is outdated
 or if there is a problem with the translation.
 
-Traditional Chinese maintainer: Hu Haowen <src.res.211@gmail.com>
----------------------------------------------------------------------
+Traditional Chinese maintainer: Hu Haowen <2023002089@link.tyut.edu.cn>
+-------------------------------------------------------------------------
 Documentation/dev-tools/sparse.rst 的繁體中文翻譯
 
 如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
 交流有困難的話，也可以向繁體中文版維護者求助。如果本翻譯更新不及時或
 者翻譯存在問題，請聯繫繁體中文版維護者。
 
-繁體中文版維護者： 胡皓文 Hu Haowen <src.res.211@gmail.com>
-繁體中文版翻譯者： 胡皓文 Hu Haowen <src.res.211@gmail.com>
+繁體中文版維護者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
+繁體中文版翻譯者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 以下爲正文
----------------------------------------------------------------------
+-------------------------------------------------------------------------
 
 Copyright 2004 Linus Torvalds
 Copyright 2004 Pavel Machek <pavel@ucw.cz>
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/dev-tools/testing-overview.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/dev-tools/testing-overview.rst
index fb3f691f46c3..3b08aad1da00 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/dev-tools/testing-overview.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/dev-tools/testing-overview.rst
@@ -3,7 +3,7 @@
 .. include:: ../disclaimer-zh_TW.rst
 
 :Original: Documentation/dev-tools/testing-overview.rst
-:Translator: 胡皓文 Hu Haowen <src.res.211@gmail.com>
+:Translator: 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 ============
 內核測試指南
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/disclaimer-zh_TW.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/disclaimer-zh_TW.rst
index 0d0ffb1ca4e8..28b734c223b6 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/disclaimer-zh_TW.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/disclaimer-zh_TW.rst
@@ -7,5 +7,5 @@
 
 .. note::
      如果您發現本文檔與原始文件有任何不同或者有翻譯問題，請聯繫該文件的譯者，
-     或者發送電子郵件給胡皓文以獲取幫助：<src.res.211@gmail.com>。
+     或者發送電子郵件給胡皓文以獲取幫助：<2023002089@link.tyut.edu.cn>。
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/filesystems/debugfs.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/filesystems/debugfs.rst
index 78e2e08af95e..cda7d0e18b9b 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/filesystems/debugfs.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/filesystems/debugfs.rst
@@ -14,7 +14,7 @@ Debugfs
 	中文版維護者： 羅楚成 Chucheng Luo <luochucheng@vivo.com>
 	中文版翻譯者： 羅楚成 Chucheng Luo <luochucheng@vivo.com>
 	中文版校譯者:  羅楚成 Chucheng Luo <luochucheng@vivo.com>
-	繁體中文版校譯者: 胡皓文 Hu Haowen <src.res.211@gmail.com>
+	繁體中文版校譯者: 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/filesystems/index.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/filesystems/index.rst
index d7f9d61f654c..88f0e632bfe2 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/filesystems/index.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/filesystems/index.rst
@@ -4,7 +4,7 @@
 
 :Original: :ref:`Documentation/filesystems/index.rst <filesystems_index>`
 :Translator: Wang Wenhu <wenhu.wang@vivo.com>
-             Hu Haowen <src.res.211@gmail.com>
+             Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_filesystems_index:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/filesystems/sysfs.txt linux-libre-6.8-gnu/Documentation/translations/zh_TW/filesystems/sysfs.txt
index ebe90651fc3b..978462d5fe14 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/filesystems/sysfs.txt
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/filesystems/sysfs.txt
@@ -22,7 +22,7 @@ Documentation/filesystems/sysfs.rst 的中文翻譯
 中文版維護者： 傅煒 Fu Wei <tekkamanninja@gmail.com>
 中文版翻譯者： 傅煒 Fu Wei <tekkamanninja@gmail.com>
 中文版校譯者： 傅煒 Fu Wei <tekkamanninja@gmail.com>
-繁體中文版校譯者：胡皓文 Hu Haowen <src.res.211@gmail.com>
+繁體中文版校譯者：胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 
 以下爲正文
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/filesystems/virtiofs.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/filesystems/virtiofs.rst
index 6150ad964e78..704a0ee44fd2 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/filesystems/virtiofs.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/filesystems/virtiofs.rst
@@ -10,7 +10,7 @@
 	中文版維護者： 王文虎 Wang Wenhu <wenhu.wang@vivo.com>
 	中文版翻譯者： 王文虎 Wang Wenhu <wenhu.wang@vivo.com>
 	中文版校譯者： 王文虎 Wang Wenhu <wenhu.wang@vivo.com>
-	繁體中文版校譯者：胡皓文 Hu Haowen <src.res.211@gmail.com>
+	繁體中文版校譯者：胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 ===========================================
 virtiofs: virtio-fs 主機<->客機共享文件系統
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/gpio.txt linux-libre-6.8-gnu/Documentation/translations/zh_TW/gpio.txt
index 555e4b11a5c7..b9b48012c62e 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/gpio.txt
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/gpio.txt
@@ -8,7 +8,7 @@ or if there is a problem with the translation.
 
 Maintainer: Grant Likely <grant.likely@secretlab.ca>
 		Linus Walleij <linus.walleij@linaro.org>
-Traditional Chinese maintainer: Hu Haowen <src.res.211@gmail.com>
+Traditional Chinese maintainer: Hu Haowen <2023002089@link.tyut.edu.cn>
 ---------------------------------------------------------------------
 Documentation/admin-guide/gpio 的繁體中文翻譯
 
@@ -18,9 +18,9 @@ Documentation/admin-guide/gpio 的繁體中文翻譯
 
 英文版維護者： Grant Likely <grant.likely@secretlab.ca>
 		Linus Walleij <linus.walleij@linaro.org>
-繁體中文版維護者： 胡皓文 Hu Haowen <src.res.211@gmail.com>
-繁體中文版翻譯者： 胡皓文 Hu Haowen <src.res.211@gmail.com>
-繁體中文版校譯者： 胡皓文 Hu Haowen <src.res.211@gmail.com>
+繁體中文版維護者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
+繁體中文版翻譯者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
+繁體中文版校譯者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 以下爲正文
 ---------------------------------------------------------------------
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/index.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/index.rst
index 563ac9bfc66b..660a74d2023c 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/index.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/index.rst
@@ -15,7 +15,7 @@
 
 .. note::
    內核文檔繁體中文版的翻譯工作正在進行中。如果您願意並且有時間參與這項工
-   作，歡迎提交補丁給胡皓文 <src.res.211@gmail.com>。
+   作，歡迎提交補丁給胡皓文 <2023002089@link.tyut.edu.cn>。
 
 與Linux 內核社區一起工作
 ------------------------
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/io_ordering.txt linux-libre-6.8-gnu/Documentation/translations/zh_TW/io_ordering.txt
index 03f86840c139..00b374092d7e 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/io_ordering.txt
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/io_ordering.txt
@@ -6,7 +6,7 @@ communicating in English you can also ask the Chinese maintainer for
 help.  Contact the Chinese maintainer if this translation is outdated
 or if there is a problem with the translation.
 
-Traditional Chinese maintainer: Hu Haowen <src.res.211@gmail.com>
+Traditional Chinese maintainer: Hu Haowen <2023002089@link.tyut.edu.cn>
 ---------------------------------------------------------------------
 Documentation/driver-api/io_ordering.rst 的繁體中文翻譯
 
@@ -14,9 +14,9 @@ Documentation/driver-api/io_ordering.rst 的繁體中文翻譯
 交流有困難的話，也可以向繁體中文版維護者求助。如果本翻譯更新不及時或
 者翻譯存在問題，請聯繫繁體中文版維護者。
 
-繁體中文版維護者： 胡皓文 Hu Haowen <src.res.211@gmail.com>
-繁體中文版翻譯者： 胡皓文 Hu Haowen <src.res.211@gmail.com>
-繁體中文版校譯者： 胡皓文 Hu Haowen <src.res.211@gmail.com>
+繁體中文版維護者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
+繁體中文版翻譯者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
+繁體中文版校譯者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 
 以下爲正文
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/1.Intro.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/1.Intro.rst
index 6e754ac48964..345c4cbe9b55 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/1.Intro.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/1.Intro.rst
@@ -11,7 +11,7 @@
 :校譯:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_development_process_intro:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/2.Process.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/2.Process.rst
index 49385d65c216..f45ddba6238f 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/2.Process.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/2.Process.rst
@@ -11,7 +11,7 @@
 :校譯:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_development_process:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/3.Early-stage.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/3.Early-stage.rst
index a6959e6350f4..a58fc9e0ea99 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/3.Early-stage.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/3.Early-stage.rst
@@ -11,7 +11,7 @@
 :校譯:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_development_early_stage:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/4.Coding.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/4.Coding.rst
index 7a4e01eabd81..bdd2abe4daf4 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/4.Coding.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/4.Coding.rst
@@ -11,7 +11,7 @@
 :校譯:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_development_coding:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/5.Posting.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/5.Posting.rst
index d398dda427aa..7d66a1c638be 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/5.Posting.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/5.Posting.rst
@@ -11,7 +11,7 @@
 :校譯:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_development_posting:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/6.Followthrough.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/6.Followthrough.rst
index bcc885ae1b8e..f3b195966632 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/6.Followthrough.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/6.Followthrough.rst
@@ -11,7 +11,7 @@
 :校譯:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_development_followthrough:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/7.AdvancedTopics.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/7.AdvancedTopics.rst
index db74d8ca3f3b..b449d67e3ad9 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/7.AdvancedTopics.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/7.AdvancedTopics.rst
@@ -11,7 +11,7 @@
 :校譯:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_development_advancedtopics:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/8.Conclusion.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/8.Conclusion.rst
index a0c00741f912..d1634421b62c 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/8.Conclusion.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/8.Conclusion.rst
@@ -10,7 +10,7 @@
 :校譯:
 
  吳想成 Wu XiangCheng <bobwxc@email.cn>
- 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_development_conclusion:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/code-of-conduct-interpretation.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/code-of-conduct-interpretation.rst
index 48df918000e9..fbe66b001322 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/code-of-conduct-interpretation.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/code-of-conduct-interpretation.rst
@@ -4,7 +4,7 @@
 
 :Original: :ref:`Documentation/process/code-of-conduct-interpretation.rst <code_of_conduct_interpretation>`
 :Translator: Alex Shi <alex.shi@linux.alibaba.com>
-             Hu Haowen <src.res.211@gmail.com>
+             Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_code_of_conduct_interpretation:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/code-of-conduct.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/code-of-conduct.rst
index a7a31de03526..d24f1695bd02 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/code-of-conduct.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/code-of-conduct.rst
@@ -4,7 +4,7 @@
 
 :Original: :ref:`Documentation/process/code-of-conduct.rst <code_of_conduct>`
 :Translator: Alex Shi <alex.shi@linux.alibaba.com>
-             Hu Haowen <src.res.211@gmail.com>
+             Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_code_of_conduct:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/coding-style.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/coding-style.rst
index 5749363de421..f11dbb65ca21 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/coding-style.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/coding-style.rst
@@ -17,7 +17,7 @@
  - 管旭東 Xudong Guan <xudong.guan@gmail.com>
  - Li Zefan <lizf@cn.fujitsu.com>
  - Wang Chen <wangchen@cn.fujitsu.com>
- - Hu Haowen <src.res.211@gmail.com>
+ - Hu Haowen <2023002089@link.tyut.edu.cn>
 
 Linux 內核代碼風格
 ==================
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/development-process.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/development-process.rst
index 7d803d3db89e..305d9472b017 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/development-process.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/development-process.rst
@@ -4,16 +4,17 @@
 
 :Original: :ref:`Documentation/process/development-process.rst <development_process_main>`
 :Translator: Alex Shi <alex.shi@linux.alibaba.com>
-             Hu Haowen <src.res.211@gmail.com>
+             Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_development_process_main:
 
 內核開發過程指南
 ================
 
-內容:
+本文檔的目的是幫助開發人員（及其經理）以最小的挫折感與開發社區合作。它試圖記錄這個社區如何以一種不熟悉Linux內核開發（或者實際上是自由軟體開發）的人可以訪問的方式工作。雖然這裡有一些技術資料，但這是一個面向過程的討論，不需要深入了解內核編程就可以理解。
 
 .. toctree::
+   :caption: 內容
    :numbered:
    :maxdepth: 2
 
@@ -27,4 +28,3 @@
    8.Conclusion
 
 本文檔的目的是幫助開發人員（及其經理）以最小的挫折感與開發社區合作。它試圖記錄這個社區如何以一種不熟悉Linux內核開發（或者實際上是自由軟件開發）的人可以訪問的方式工作。雖然這裏有一些技術資料，但這是一個面向過程的討論，不需要深入瞭解內核編程就可以理解。
-
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/email-clients.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/email-clients.rst
index 55e10d3fc28a..a5ac9400a9f5 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/email-clients.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/email-clients.rst
@@ -15,7 +15,7 @@
  - Yinglin Luan <synmyth@gmail.com>
  - Xiaochen Wang <wangxiaochen0@gmail.com>
  - yaxinsn <yaxinsn@163.com>
- - Hu Haowen <src.res.211@gmail.com>
+ - Hu Haowen <2023002089@link.tyut.edu.cn>
 
 Linux郵件客戶端配置信息
 =======================
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/embargoed-hardware-issues.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/embargoed-hardware-issues.rst
index b9f6ab7b6666..3cce7db2ab7e 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/embargoed-hardware-issues.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/embargoed-hardware-issues.rst
@@ -4,7 +4,7 @@
 
 :Original: :ref:`Documentation/process/embargoed-hardware-issues.rst <embargoed_hardware_issues>`
 :Translator: Alex Shi <alex.shi@linux.alibaba.com>
-             Hu Haowen <src.res.211@gmail.com>
+             Hu Haowen <2023002089@link.tyut.edu.cn>
 
 被限制的硬件問題
 ================
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/howto.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/howto.rst
index 306f5b77b4b8..80c416483e73 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/howto.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/howto.rst
@@ -16,7 +16,7 @@
                    鍾宇  TripleX Chung <xxx.phy@gmail.com>
                    陳琦  Maggie Chen <chenqi@beyondsoft.com>
                    王聰  Wang Cong <xiyou.wangcong@gmail.com>
-                   胡皓文 Hu Haowen <src.res.211@gmail.com>
+                   胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 如何參與Linux內核開發
 =====================
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/index.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/index.rst
index 6a0d98b2f9ee..65922d9faa20 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/index.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/index.rst
@@ -9,7 +9,7 @@
 
 :Original: :ref:`Documentation/process/index.rst <process_index>`
 :Translator: Alex Shi <alex.shi@linux.alibaba.com>
-             Hu Haowen <src.res.211@gmail.com>
+             Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_process_index:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/kernel-driver-statement.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/kernel-driver-statement.rst
index e967089d2e1f..23d5cae9685b 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/kernel-driver-statement.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/kernel-driver-statement.rst
@@ -6,7 +6,7 @@
 
 :Original: :ref:`Documentation/process/kernel-driver-statement.rst <process_statement_driver>`
 :Translator: Alex Shi <alex.shi@linux.alibaba.com>
-             Hu Haowen <src.res.211@gmail.com>
+             Hu Haowen <2023002089@link.tyut.edu.cn>
 
 內核驅動聲明
 ------------
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/kernel-enforcement-statement.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/kernel-enforcement-statement.rst
index 2861f4a15721..524eb4ac26cc 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/kernel-enforcement-statement.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/kernel-enforcement-statement.rst
@@ -6,7 +6,7 @@
 
 :Original: :ref:`Documentation/process/kernel-enforcement-statement.rst <process_statement_kernel>`
 :Translator: Alex Shi <alex.shi@linux.alibaba.com>
-             Hu Haowen <src.res.211@gmail.com>
+             Hu Haowen <2023002089@link.tyut.edu.cn>
 
 Linux 內核執行聲明
 ------------------
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/license-rules.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/license-rules.rst
index 2c43bcf2ac79..594255856b68 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/license-rules.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/license-rules.rst
@@ -4,7 +4,7 @@
 
 :Original: :ref:`Documentation/process/license-rules.rst <kernel_licensing>`
 :Translator: Alex Shi <alex.shi@linux.alibaba.com>
-             Hu Haowen <src.res.211@gmail.com>
+             Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_kernel_licensing:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/magic-number.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/magic-number.rst
index 5657d5cd18d4..199cd5d63973 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/magic-number.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/magic-number.rst
@@ -12,7 +12,7 @@
         中文版維護者： 賈威威 Jia Wei Wei <harryxiyou@gmail.com>
         中文版翻譯者： 賈威威 Jia Wei Wei <harryxiyou@gmail.com>
         中文版校譯者： 賈威威 Jia Wei Wei <harryxiyou@gmail.com>
-                      胡皓文 Hu Haowen <src.res.211@gmail.com>
+                      胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 Linux 魔術數
 ============
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/management-style.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/management-style.rst
index f3913e3c159d..7cb912e89032 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/management-style.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/management-style.rst
@@ -4,7 +4,7 @@
 
 :Original: :ref:`Documentation/process/management-style.rst <managementstyle>`
 :Translator: Alex Shi <alex.shi@linux.alibaba.com>
-             Hu Haowen <src.res.211@gmail.com>
+             Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_managementstyle:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/programming-language.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/programming-language.rst
index e33389676eed..d2c64a5599e8 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/programming-language.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/programming-language.rst
@@ -4,7 +4,7 @@
 
 :Original: :ref:`Documentation/process/programming-language.rst <programming_language>`
 :Translator: Alex Shi <alex.shi@linux.alibaba.com>
-             Hu Haowen <src.res.211@gmail.com>
+             Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_programming_language:
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/stable-api-nonsense.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/stable-api-nonsense.rst
index 6839d25bb22a..4b8597fed5ae 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/stable-api-nonsense.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/stable-api-nonsense.rst
@@ -12,7 +12,7 @@
         中文版維護者： 鍾宇  TripleX Chung <xxx.phy@gmail.com>
         中文版翻譯者： 鍾宇  TripleX Chung <xxx.phy@gmail.com>
         中文版校譯者： 李陽  Li Yang <leoyang.li@nxp.com>
-                      胡皓文 Hu Haowen <src.res.211@gmail.com>
+                      胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 Linux 內核驅動接口
 ==================
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/stable-kernel-rules.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/stable-kernel-rules.rst
index bd82a8ff3969..2f8f064f8629 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/stable-kernel-rules.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/stable-kernel-rules.rst
@@ -15,7 +15,7 @@
         中文版校譯者：
             - 李陽  Li Yang <leoyang.li@nxp.com>
             - Kangkai Yin <e12051@motorola.com>
-            - 胡皓文 Hu Haowen <src.res.211@gmail.com>
+            - 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 所有你想知道的事情 - 關於linux穩定版發佈
 ========================================
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/submit-checklist.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/submit-checklist.rst
index 942962d1e2f4..43f2e3c5b514 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/submit-checklist.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/submit-checklist.rst
@@ -6,7 +6,7 @@
 :Translator:
  - Alex Shi <alexs@kernel.org>
  - Wu XiangCheng <bobwxc@email.cn>
- - Hu Haowen <src.res.211@gmail.com>
+ - Hu Haowen <2023002089@link.tyut.edu.cn>
 
 .. _tw_submitchecklist:
 
@@ -56,8 +56,7 @@ Linux內核補丁提交檢查單
 9) 通過 sparse 清查。
    （參見 Documentation/translations/zh_CN/dev-tools/sparse.rst ）
 
-10) 使用 ``make checkstack`` 和 ``make namespacecheck`` 並修復他們發現的任何
-    問題。
+10) 使用 ``make checkstack`` 並修復他們發現的任何問題。
 
     .. note::
 
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/submitting-patches.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/submitting-patches.rst
index 8272b3218b54..99fa0f2fe6f4 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/submitting-patches.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/submitting-patches.rst
@@ -14,7 +14,7 @@
 :校譯:
  - 李陽 Li Yang <leoyang.li@nxp.com>
  - 王聰 Wang Cong <xiyou.wangcong@gmail.com>
- - 胡皓文 Hu Haowen <src.res.211@gmail.com>
+ - 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 
 提交補丁：如何讓你的改動進入內核
diff --git linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/volatile-considered-harmful.rst linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/volatile-considered-harmful.rst
index a609620affb0..e2723f3cbbb0 100644
--- linux-libre-6.7-gnu/Documentation/translations/zh_TW/process/volatile-considered-harmful.rst
+++ linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/volatile-considered-harmful.rst
@@ -17,7 +17,7 @@
         中文版校譯者： 張漢輝  Eugene Teo <eugeneteo@kernel.sg>
                        楊瑞  Dave Young <hidave.darkstar@gmail.com>
                        時奎亮 Alex Shi <alex.shi@linux.alibaba.com>
-                       胡皓文 Hu Haowen <src.res.211@gmail.com>
+                       胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn>
 
 爲什麼不應該使用“volatile”類型
 ==============================
diff --git linux-libre-6.7-gnu/Documentation/usb/gadget-testing.rst linux-libre-6.8-gnu/Documentation/usb/gadget-testing.rst
index 29072c166d23..077dfac7ed98 100644
--- linux-libre-6.7-gnu/Documentation/usb/gadget-testing.rst
+++ linux-libre-6.8-gnu/Documentation/usb/gadget-testing.rst
@@ -448,15 +448,17 @@ Function-specific configfs interface
 The function name to use when creating the function directory is "ncm".
 The NCM function provides these attributes in its function directory:
 
-	=============== ==================================================
-	ifname		network device interface name associated with this
-			function instance
-	qmult		queue length multiplier for high and super speed
-	host_addr	MAC address of host's end of this
-			Ethernet over USB link
-	dev_addr	MAC address of device's end of this
-			Ethernet over USB link
-	=============== ==================================================
+	======================= ==================================================
+	ifname			network device interface name associated with this
+				function instance
+	qmult			queue length multiplier for high and super speed
+	host_addr		MAC address of host's end of this
+				Ethernet over USB link
+	dev_addr		MAC address of device's end of this
+				Ethernet over USB link
+	max_segment_size	Segment size required for P2P connections. This
+				will set MTU to 14 bytes
+	======================= ==================================================
 
 and after creating the functions/ncm.<instance name> they contain default
 values: qmult is 5, dev_addr and host_addr are randomly selected.
diff --git linux-libre-6.7-gnu/Documentation/usb/raw-gadget.rst linux-libre-6.8-gnu/Documentation/usb/raw-gadget.rst
index 818a1648b387..59b2132b584d 100644
--- linux-libre-6.7-gnu/Documentation/usb/raw-gadget.rst
+++ linux-libre-6.8-gnu/Documentation/usb/raw-gadget.rst
@@ -81,9 +81,6 @@ feature must be kept in the implementation.
 Potential future improvements
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-- Report more events (suspend, resume, etc.) through
-  ``USB_RAW_IOCTL_EVENT_FETCH``.
-
 - Support ``O_NONBLOCK`` I/O. This would be another mode of operation, where
   Raw Gadget would not wait until the completion of each USB request.
 
diff --git linux-libre-6.7-gnu/Documentation/driver-api/dcdbas.rst linux-libre-6.8-gnu/Documentation/userspace-api/dcdbas.rst
similarity index 100%
rename from Documentation/driver-api/dcdbas.rst
rename to Documentation/userspace-api/dcdbas.rst
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/index.rst linux-libre-6.8-gnu/Documentation/userspace-api/index.rst
index 031df47a7c19..09f61bd2ac2e 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/index.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/index.rst
@@ -9,11 +9,8 @@ While much of the kernel's user-space API is documented elsewhere
 also be found in the kernel tree itself.  This manual is intended to be the
 place where this information is gathered.
 
-.. class:: toc-title
-
-	   Table of contents
-
 .. toctree::
+   :caption: Table of contents
    :maxdepth: 2
 
    no_new_privs
@@ -33,6 +30,10 @@ place where this information is gathered.
    sysfs-platform_profile
    vduse
    futex2
+   lsm
+   tee
+   isapnp
+   dcdbas
 
 .. only::  subproject and html
 
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst linux-libre-6.8-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
index 4ea5b837399a..457e16f06e04 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -128,7 +128,6 @@ Code  Seq#    Include File                                           Comments
 'F'   all    linux/fb.h                                              conflict!
 'F'   01-02  drivers/scsi/pmcraid.h                                  conflict!
 'F'   20     drivers/video/fsl-diu-fb.h                              conflict!
-'F'   20     drivers/video/intelfb/intelfb.h                         conflict!
 'F'   20     linux/ivtvfb.h                                          conflict!
 'F'   20     linux/matroxfb.h                                        conflict!
 'F'   20     drivers/video/aty/atyfb_base.c                          conflict!
@@ -349,6 +348,10 @@ Code  Seq#    Include File                                           Comments
                                                                      <mailto:vgo@ratio.de>
 0xB1  00-1F                                                          PPPoX
                                                                      <mailto:mostrows@styx.uwaterloo.ca>
+0xB2  00     arch/powerpc/include/uapi/asm/papr-vpd.h                powerpc/pseries VPD API
+                                                                     <mailto:linuxppc-dev>
+0xB2  01-02  arch/powerpc/include/uapi/asm/papr-sysparm.h            powerpc/pseries system parameter API
+                                                                     <mailto:linuxppc-dev>
 0xB3  00     linux/mmc/ioctl.h
 0xB4  00-0F  linux/gpio.h                                            <mailto:linux-gpio@vger.kernel.org>
 0xB5  00-0F  uapi/linux/rpmsg.h                                      <mailto:linux-remoteproc@vger.kernel.org>
diff --git linux-libre-6.7-gnu/Documentation/driver-api/isapnp.rst linux-libre-6.8-gnu/Documentation/userspace-api/isapnp.rst
similarity index 51%
rename from Documentation/driver-api/isapnp.rst
rename to Documentation/userspace-api/isapnp.rst
index 8d0840ac847b..d6fceb19b8ae 100644
--- linux-libre-6.7-gnu/Documentation/driver-api/isapnp.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/isapnp.rst
@@ -1,11 +1,11 @@
-==========================================================
-ISA Plug & Play support by Jaroslav Kysela <perex@suse.cz>
-==========================================================
+=======================
+ISA Plug & Play support
+=======================
 
 Interface /proc/isapnp
 ======================
 
-The interface has been removed. See pnp.txt for more details.
+The interface was removed in kernel 2.5.53. See pnp.rst for more details.
 
 Interface /proc/bus/isapnp
 ==========================
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/lsm.rst linux-libre-6.8-gnu/Documentation/userspace-api/lsm.rst
new file mode 100644
index 000000000000..a76da373841b
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/userspace-api/lsm.rst
@@ -0,0 +1,73 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. Copyright (C) 2022 Casey Schaufler <casey@schaufler-ca.com>
+.. Copyright (C) 2022 Intel Corporation
+
+=====================================
+Linux Security Modules
+=====================================
+
+:Author: Casey Schaufler
+:Date: July 2023
+
+Linux security modules (LSM) provide a mechanism to implement
+additional access controls to the Linux security policies.
+
+The various security modules may support any of these attributes:
+
+``LSM_ATTR_CURRENT`` is the current, active security context of the
+process.
+The proc filesystem provides this value in ``/proc/self/attr/current``.
+This is supported by the SELinux, Smack and AppArmor security modules.
+Smack also provides this value in ``/proc/self/attr/smack/current``.
+AppArmor also provides this value in ``/proc/self/attr/apparmor/current``.
+
+``LSM_ATTR_EXEC`` is the security context of the process at the time the
+current image was executed.
+The proc filesystem provides this value in ``/proc/self/attr/exec``.
+This is supported by the SELinux and AppArmor security modules.
+AppArmor also provides this value in ``/proc/self/attr/apparmor/exec``.
+
+``LSM_ATTR_FSCREATE`` is the security context of the process used when
+creating file system objects.
+The proc filesystem provides this value in ``/proc/self/attr/fscreate``.
+This is supported by the SELinux security module.
+
+``LSM_ATTR_KEYCREATE`` is the security context of the process used when
+creating key objects.
+The proc filesystem provides this value in ``/proc/self/attr/keycreate``.
+This is supported by the SELinux security module.
+
+``LSM_ATTR_PREV`` is the security context of the process at the time the
+current security context was set.
+The proc filesystem provides this value in ``/proc/self/attr/prev``.
+This is supported by the SELinux and AppArmor security modules.
+AppArmor also provides this value in ``/proc/self/attr/apparmor/prev``.
+
+``LSM_ATTR_SOCKCREATE`` is the security context of the process used when
+creating socket objects.
+The proc filesystem provides this value in ``/proc/self/attr/sockcreate``.
+This is supported by the SELinux security module.
+
+Kernel interface
+================
+
+Set a security attribute of the current process
+-----------------------------------------------
+
+.. kernel-doc:: security/lsm_syscalls.c
+    :identifiers: sys_lsm_set_self_attr
+
+Get the specified security attributes of the current process
+------------------------------------------------------------
+
+.. kernel-doc:: security/lsm_syscalls.c
+    :identifiers: sys_lsm_get_self_attr
+
+.. kernel-doc:: security/lsm_syscalls.c
+    :identifiers: sys_lsm_list_modules
+
+Additional documentation
+========================
+
+* Documentation/security/lsm.rst
+* Documentation/security/lsm-development.rst
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/cec/cec-api.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/cec/cec-api.rst
index 4d229ed8a1d9..578303d484f3 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/cec/cec-api.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/cec/cec-api.rst
@@ -10,13 +10,8 @@ Part V - Consumer Electronics Control API
 This part describes the CEC: Consumer Electronics Control
 
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+    :caption: Table of Contents
     :maxdepth: 5
     :numbered:
 
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/drivers/index.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/drivers/index.rst
index 1726f8ec86fa..2252063593bf 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/drivers/index.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/drivers/index.rst
@@ -21,13 +21,8 @@ more details.
 
 For more details see the file COPYING in the source distribution of Linux.
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+	:caption: Table of Contents
 	:maxdepth: 5
 	:numbered:
 
@@ -41,4 +36,5 @@ For more details see the file COPYING in the source distribution of Linux.
 	npcm-video
 	omap3isp-uapi
 	st-vgxy61
+	thp7312
 	uvcvideo
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/drivers/thp7312.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/drivers/thp7312.rst
new file mode 100644
index 000000000000..7c777e6fb7d2
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/drivers/thp7312.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+THine THP7312 ISP driver
+========================
+
+The THP7312 driver implements the following driver-specific controls:
+
+``V4L2_CID_THP7312_LOW_LIGHT_COMPENSATION``
+    Enable/Disable auto-adjustment, based on lighting conditions, of the frame
+    rate when auto-exposure is enabled.
+
+``V4L2_CID_THP7312_AUTO_FOCUS_METHOD``
+    Set method of auto-focus. Only takes effect when auto-focus is enabled.
+
+    .. flat-table::
+        :header-rows:  0
+        :stub-columns: 0
+        :widths:       1 4
+
+        * - ``0``
+          - Contrast-based auto-focus
+        * - ``1``
+          - PDAF
+        * - ``2``
+          - Hybrid of contrast-based and PDAF
+
+    Supported values for the control depend on the camera sensor module
+    connected to the THP7312. If the module doesn't have a focus lens actuator,
+    this control will not be exposed by the THP7312 driver. If the module has a
+    controllable focus lens but the sensor doesn't support PDAF, only the
+    contrast-based auto-focus value will be valid. Otherwise all values for the
+    controls will be supported.
+
+``V4L2_CID_THP7312_NOISE_REDUCTION_AUTO``
+    Enable/Disable auto noise reduction.
+
+``V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE``
+    Set the noise reduction strength, where 0 is the weakest and 10 is the
+    strongest.
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/dvb/dvbapi.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/dvb/dvbapi.rst
index 1dda69343f34..4ac0c1bc54ca 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/dvb/dvbapi.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/dvb/dvbapi.rst
@@ -27,13 +27,8 @@ Part II - Digital TV API
 
 **Version 5.10**
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+    :caption: Table of Contents
     :maxdepth: 5
     :numbered:
 
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/index.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/index.rst
index d839904be085..337ef6c7c47f 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/index.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/index.rst
@@ -21,13 +21,8 @@ Documentation/driver-api/media/index.rst
     media devices;
 
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+    :caption: Table of Contents
     :maxdepth: 1
 
     intro
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/mediactl/media-controller.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/mediactl/media-controller.rst
index 508dd693bf6c..73a87f82f92d 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/mediactl/media-controller.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/mediactl/media-controller.rst
@@ -7,13 +7,8 @@
 Part IV - Media Controller API
 ##############################
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+    :caption: Table of Contents
     :maxdepth: 5
     :numbered:
 
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/rc/remote_controllers.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/rc/remote_controllers.rst
index f89291838637..483f9ae92a90 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/rc/remote_controllers.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/rc/remote_controllers.rst
@@ -7,13 +7,8 @@
 Part III - Remote Controller API
 ################################
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+    :caption: Table of Contents
     :maxdepth: 5
     :numbered:
 
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/v4l2.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/v4l2.rst
index ad7a2bf0cf26..cf8ae56a008c 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/v4l2.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/v4l2.rst
@@ -11,13 +11,8 @@ This part describes the Video for Linux API version 2 (V4L2 API) specification.
 
 **Revision 4.5**
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+    :caption: Table of Contents
     :numbered:
     :maxdepth: 5
 
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
index a048a9f6b7b6..49232c9006c2 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
@@ -116,9 +116,13 @@ than the number requested.
       - ``flags``
       - Specifies additional buffer management attributes.
 	See :ref:`memory-flags`.
-
     * - __u32
-      - ``reserved``\ [6]
+      - ``max_num_buffers``
+      - If the V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS capability flag is set
+        this field indicates the maximum possible number of buffers
+        for this queue.
+    * - __u32
+      - ``reserved``\ [5]
       - A place holder for future extensions. Drivers and applications
 	must set the array to zero.
 
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
index f9f73530a6be..4d56c0528ad7 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
@@ -295,6 +295,14 @@ still cause this situation.
       - ``p_av1_film_grain``
       - A pointer to a struct :c:type:`v4l2_ctrl_av1_film_grain`. Valid if this control is
         of type ``V4L2_CTRL_TYPE_AV1_FILM_GRAIN``.
+    * - struct :c:type:`v4l2_ctrl_hdr10_cll_info` *
+      - ``p_hdr10_cll_info``
+      - A pointer to a struct :c:type:`v4l2_ctrl_hdr10_cll_info`. Valid if this control is
+        of type ``V4L2_CTRL_TYPE_HDR10_CLL_INFO``.
+    * - struct :c:type:`v4l2_ctrl_hdr10_mastering_display` *
+      - ``p_hdr10_mastering_display``
+      - A pointer to a struct :c:type:`v4l2_ctrl_hdr10_mastering_display`. Valid if this control is
+        of type ``V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY``.
     * - void *
       - ``ptr``
       - A pointer to a compound type which can be an N-dimensional array
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
index 099fa6695167..0b3a41a45d05 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
@@ -120,6 +120,7 @@ aborting or finishing any DMA in progress, an implicit
 .. _V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS:
 .. _V4L2-BUF-CAP-SUPPORTS-M2M-HOLD-CAPTURE-BUF:
 .. _V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS:
+.. _V4L2-BUF-CAP-SUPPORTS-MAX-NUM-BUFFERS:
 
 .. raw:: latex
 
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst
index 8def4c05d3da..c935bacc3bc2 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst
@@ -107,8 +107,7 @@ appropriately. The generic error codes are described at the
 :ref:`Generic Error Codes <gen-errors>` chapter.
 
 EINVAL
-    The struct
-    :c:type:`v4l2_subdev_frame_interval_enum`
-    ``pad`` references a non-existing pad, one of the ``code``,
-    ``width`` or ``height`` fields are invalid for the given pad or the
-    ``index`` field is out of bounds.
+    The struct :c:type:`v4l2_subdev_frame_interval_enum` ``pad`` references a
+    non-existing pad, the ``which`` field has an unsupported value, one of the
+    ``code``, ``width`` or ``height`` fields are invalid for the given pad, or
+    the ``index`` field is out of bounds.
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst
index e3ae84df5486..65f0cfeca973 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst
@@ -126,7 +126,6 @@ appropriately. The generic error codes are described at the
 :ref:`Generic Error Codes <gen-errors>` chapter.
 
 EINVAL
-    The struct
-    :c:type:`v4l2_subdev_frame_size_enum`
-    ``pad`` references a non-existing pad, the ``code`` is invalid for
-    the given pad or the ``index`` field is out of bounds.
+    The struct :c:type:`v4l2_subdev_frame_size_enum` ``pad`` references a
+    non-existing pad, the ``which`` field has an unsupported value, the ``code``
+    is invalid for the given pad, or the ``index`` field is out of bounds.
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst
index 4ad7dec27e25..3050966b199f 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst
@@ -158,7 +158,6 @@ appropriately. The generic error codes are described at the
 :ref:`Generic Error Codes <gen-errors>` chapter.
 
 EINVAL
-    The struct
-    :c:type:`v4l2_subdev_mbus_code_enum`
-    ``pad`` references a non-existing pad, or the ``index`` field is out
-    of bounds.
+    The struct :c:type:`v4l2_subdev_mbus_code_enum` ``pad`` references a
+    non-existing pad, the ``which`` field has an unsupported value, or the
+    ``index`` field is out of bounds.
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst
index 20f12a1cc0f7..810b6a859dc8 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst
@@ -71,6 +71,11 @@ is unknown to the kernel.
         of 'stream' fields (referring to the stream number) with various
         ioctls. If this is not set (which is the default), the 'stream' fields
         will be forced to 0 by the kernel.
+    * - ``V4L2_SUBDEV_CLIENT_CAP_INTERVAL_USES_WHICH``
+      - The client is aware of the :c:type:`v4l2_subdev_frame_interval`
+        ``which`` field. If this is not set (which is the default), the
+        ``which`` field is forced to ``V4L2_SUBDEV_FORMAT_ACTIVE`` by the
+        kernel.
 
 Return Value
 ============
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst
index 1d267f7e7991..92d933631fda 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst
@@ -118,10 +118,9 @@ EBUSY
     ``VIDIOC_SUBDEV_S_CROP``
 
 EINVAL
-    The struct :c:type:`v4l2_subdev_crop` ``pad``
-    references a non-existing pad, the ``which`` field references a
-    non-existing format, or cropping is not supported on the given
-    subdev pad.
+    The struct :c:type:`v4l2_subdev_crop` ``pad`` references a non-existing pad,
+    the ``which`` field has an unsupported value, or cropping is not supported
+    on the given subdev pad.
 
 EPERM
     The ``VIDIOC_SUBDEV_S_CROP`` ioctl has been called on a read-only subdevice
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst
index ed253a1e44b7..4a2b4e4f0152 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst
@@ -140,9 +140,8 @@ EBUSY
     fix the problem first. Only returned by ``VIDIOC_SUBDEV_S_FMT``
 
 EINVAL
-    The struct :c:type:`v4l2_subdev_format`
-    ``pad`` references a non-existing pad, or the ``which`` field
-    references a non-existing format.
+    The struct :c:type:`v4l2_subdev_format` ``pad`` references a non-existing
+    pad, or the ``which`` field has an unsupported value.
 
 EPERM
     The ``VIDIOC_SUBDEV_S_FMT`` ioctl has been called on a read-only subdevice
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst
index 842f962d2aea..c8022809ac35 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst
@@ -58,8 +58,9 @@ struct
 contains the current frame interval as would be returned by a
 ``VIDIOC_SUBDEV_G_FRAME_INTERVAL`` call.
 
-Calling ``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` on a subdev device node that has been
-registered in read-only mode is not allowed. An error is returned and the errno
+If the subdev device node has been registered in read-only mode, calls to
+``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` are only valid if the ``which`` field is set
+to ``V4L2_SUBDEV_FORMAT_TRY``, otherwise an error is returned and the errno
 variable is set to ``-EPERM``.
 
 Drivers must not return an error solely because the requested interval
@@ -93,7 +94,11 @@ the same sub-device is not defined.
       - ``stream``
       - Stream identifier.
     * - __u32
-      - ``reserved``\ [8]
+      - ``which``
+      - Active or try frame interval, from enum
+	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
+    * - __u32
+      - ``reserved``\ [7]
       - Reserved for future extensions. Applications and drivers must set
 	the array to zero.
 
@@ -112,11 +117,10 @@ EBUSY
     ``VIDIOC_SUBDEV_S_FRAME_INTERVAL``
 
 EINVAL
-    The struct
-    :c:type:`v4l2_subdev_frame_interval`
-    ``pad`` references a non-existing pad, or the pad doesn't support
-    frame intervals.
+    The struct :c:type:`v4l2_subdev_frame_interval` ``pad`` references a
+    non-existing pad, the ``which`` field has an unsupported value, or the pad
+    doesn't support frame intervals.
 
 EPERM
     The ``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` ioctl has been called on a read-only
-    subdevice.
+    subdevice and the ``which`` field is set to ``V4L2_SUBDEV_FORMAT_ACTIVE``.
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
index 72677a280cd6..26b5004bfe6d 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
@@ -72,7 +72,7 @@ On a successful ``VIDIOC_SUBDEV_G_ROUTING`` call the driver updates the
 
     * - __u32
       - ``which``
-      - Format to modified, from enum
+      - Routing table to be accessed, from enum
         :ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
     * - struct :c:type:`v4l2_subdev_route`
       - ``routes[]``
@@ -140,8 +140,9 @@ ENOSPC
    all the available routes the subdevice exposes.
 
 EINVAL
-   The sink or source pad identifiers reference a non-existing pad, or reference
-   pads of different types (ie. the sink_pad identifiers refers to a source pad).
+   The sink or source pad identifiers reference a non-existing pad or reference
+   pads of different types (ie. the sink_pad identifiers refers to a source
+   pad), or the ``which`` field has an unsupported value.
 
 E2BIG
    The application provided ``num_routes`` for ``VIDIOC_SUBDEV_S_ROUTING`` is
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst
index 6b629c19168c..19e6c3e9c06d 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst
@@ -116,10 +116,9 @@ EBUSY
     ``VIDIOC_SUBDEV_S_SELECTION``
 
 EINVAL
-    The struct :c:type:`v4l2_subdev_selection`
-    ``pad`` references a non-existing pad, the ``which`` field
-    references a non-existing format, or the selection target is not
-    supported on the given subdev pad.
+    The struct :c:type:`v4l2_subdev_selection` ``pad`` references a
+    non-existing pad, the ``which`` field has an unsupported value, or the
+    selection target is not supported on the given subdev pad.
 
 EPERM
     The ``VIDIOC_SUBDEV_S_SELECTION`` ioctl has been called on a read-only
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/netlink/index.rst linux-libre-6.8-gnu/Documentation/userspace-api/netlink/index.rst
index 62725dafbbdb..c1b6765cc963 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/netlink/index.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/netlink/index.rst
@@ -16,4 +16,6 @@ Netlink documentation for users.
    genetlink-legacy
    netlink-raw
 
-See also :ref:`Documentation/core-api/netlink.rst <kernel_netlink>`.
+See also:
+ - :ref:`Documentation/core-api/netlink.rst <kernel_netlink>`
+ - :ref:`Documentation/networking/netlink_spec/index.rst <specs>`
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/netlink/intro.rst linux-libre-6.8-gnu/Documentation/userspace-api/netlink/intro.rst
index 7b1d401210ef..aacffade8f84 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/netlink/intro.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/netlink/intro.rst
@@ -234,6 +234,10 @@ ACK attributes may be present::
   | ** optionally extended ACK                 |
   ----------------------------------------------
 
+Note that some implementations may issue custom ``NLMSG_DONE`` messages
+in reply to ``do`` action requests. In that case the payload is
+implementation-specific and may also be absent.
+
 .. _res_fam:
 
 Resolving the Family ID
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/netlink/netlink-raw.rst linux-libre-6.8-gnu/Documentation/userspace-api/netlink/netlink-raw.rst
index f07fb9b9c101..1e14f5f22b8e 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/netlink/netlink-raw.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/netlink/netlink-raw.rst
@@ -14,7 +14,8 @@ Specification
 The netlink-raw schema extends the :doc:`genetlink-legacy <genetlink-legacy>`
 schema with properties that are needed to specify the protocol numbers and
 multicast IDs used by raw netlink families. See :ref:`classic_netlink` for more
-information.
+information. The raw netlink families also make use of type-specific
+sub-messages.
 
 Globals
 -------
@@ -56,3 +57,96 @@ group registration.
       -
         name: rtnlgrp-mctp-ifaddr
         value: 34
+
+Sub-messages
+------------
+
+Several raw netlink families such as
+:doc:`rt_link<../../networking/netlink_spec/rt_link>` and
+:doc:`tc<../../networking/netlink_spec/tc>` use attribute nesting as an
+abstraction to carry module specific information.
+
+Conceptually it looks as follows::
+
+    [OUTER NEST OR MESSAGE LEVEL]
+      [GENERIC ATTR 1]
+      [GENERIC ATTR 2]
+      [GENERIC ATTR 3]
+      [GENERIC ATTR - wrapper]
+        [MODULE SPECIFIC ATTR 1]
+        [MODULE SPECIFIC ATTR 2]
+
+The ``GENERIC ATTRs`` at the outer level are defined in the core (or rt_link or
+core TC), while specific drivers, TC classifiers, qdiscs etc. can carry their
+own information wrapped in the ``GENERIC ATTR - wrapper``. Even though the
+example above shows attributes nesting inside the wrapper, the modules generally
+have full freedom to define the format of the nest. In practice the payload of
+the wrapper attr has very similar characteristics to a netlink message. It may
+contain a fixed header / structure, netlink attributes, or both. Because of
+those shared characteristics we refer to the payload of the wrapper attribute as
+a sub-message.
+
+A sub-message attribute uses the value of another attribute as a selector key to
+choose the right sub-message format. For example if the following attribute has
+already been decoded:
+
+.. code-block:: json
+
+  { "kind": "gre" }
+
+and we encounter the following attribute spec:
+
+.. code-block:: yaml
+
+  -
+    name: data
+    type: sub-message
+    sub-message: linkinfo-data-msg
+    selector: kind
+
+Then we look for a sub-message definition called ``linkinfo-data-msg`` and use
+the value of the ``kind`` attribute i.e. ``gre`` as the key to choose the
+correct format for the sub-message:
+
+.. code-block:: yaml
+
+  sub-messages:
+    name: linkinfo-data-msg
+    formats:
+      -
+        value: bridge
+        attribute-set: linkinfo-bridge-attrs
+      -
+        value: gre
+        attribute-set: linkinfo-gre-attrs
+      -
+        value: geneve
+        attribute-set: linkinfo-geneve-attrs
+
+This would decode the attribute value as a sub-message with the attribute-set
+called ``linkinfo-gre-attrs`` as the attribute space.
+
+A sub-message can have an optional ``fixed-header`` followed by zero or more
+attributes from an ``attribute-set``. For example the following
+``tc-options-msg`` sub-message defines message formats that use a mixture of
+``fixed-header``, ``attribute-set`` or both together:
+
+.. code-block:: yaml
+
+  sub-messages:
+    -
+      name: tc-options-msg
+      formats:
+        -
+          value: bfifo
+          fixed-header: tc-fifo-qopt
+        -
+          value: cake
+          attribute-set: tc-cake-attrs
+        -
+          value: netem
+          fixed-header: tc-netem-qopt
+          attribute-set: tc-netem-attrs
+
+Note that a selector attribute must appear in a netlink message before any
+sub-message attributes that depend on it.
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/netlink/specs.rst linux-libre-6.8-gnu/Documentation/userspace-api/netlink/specs.rst
index c1b951649113..1b50d97d8d7c 100644
--- linux-libre-6.7-gnu/Documentation/userspace-api/netlink/specs.rst
+++ linux-libre-6.8-gnu/Documentation/userspace-api/netlink/specs.rst
@@ -15,7 +15,7 @@ kernel headers directly.
 Internally kernel uses the YAML specs to generate:
 
  - the C uAPI header
- - documentation of the protocol as a ReST file
+ - documentation of the protocol as a ReST file - see :ref:`Documentation/networking/netlink_spec/index.rst <specs>`
  - policy tables for input attribute validation
  - operation tables
 
diff --git linux-libre-6.7-gnu/Documentation/userspace-api/tee.rst linux-libre-6.8-gnu/Documentation/userspace-api/tee.rst
new file mode 100644
index 000000000000..e2368dbc3451
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/userspace-api/tee.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. tee:
+
+==================================================
+TEE (Trusted Execution Environment) Userspace API
+==================================================
+
+include/uapi/linux/tee.h defines the generic interface to a TEE.
+
+User space (the client) connects to the driver by opening /dev/tee[0-9]* or
+/dev/teepriv[0-9]*.
+
+- TEE_IOC_SHM_ALLOC allocates shared memory and returns a file descriptor
+  which user space can mmap. When user space doesn't need the file
+  descriptor any more, it should be closed. When shared memory isn't needed
+  any longer it should be unmapped with munmap() to allow the reuse of
+  memory.
+
+- TEE_IOC_VERSION lets user space know which TEE this driver handles and
+  its capabilities.
+
+- TEE_IOC_OPEN_SESSION opens a new session to a Trusted Application.
+
+- TEE_IOC_INVOKE invokes a function in a Trusted Application.
+
+- TEE_IOC_CANCEL may cancel an ongoing TEE_IOC_OPEN_SESSION or TEE_IOC_INVOKE.
+
+- TEE_IOC_CLOSE_SESSION closes a session to a Trusted Application.
+
+There are two classes of clients, normal clients and supplicants. The latter is
+a helper process for the TEE to access resources in Linux, for example file
+system access. A normal client opens /dev/tee[0-9]* and a supplicant opens
+/dev/teepriv[0-9].
+
+Much of the communication between clients and the TEE is opaque to the
+driver. The main job for the driver is to receive requests from the
+clients, forward them to the TEE and send back the results. In the case of
+supplicants the communication goes in the other direction, the TEE sends
+requests to the supplicant which then sends back the result.
diff --git linux-libre-6.7-gnu/Documentation/virt/hyperv/index.rst linux-libre-6.8-gnu/Documentation/virt/hyperv/index.rst
index 4a7a1b738bbe..de447e11b4a5 100644
--- linux-libre-6.7-gnu/Documentation/virt/hyperv/index.rst
+++ linux-libre-6.8-gnu/Documentation/virt/hyperv/index.rst
@@ -10,3 +10,4 @@ Hyper-V Enlightenments
    overview
    vmbus
    clocks
+   vpci
diff --git linux-libre-6.7-gnu/Documentation/virt/hyperv/vpci.rst linux-libre-6.8-gnu/Documentation/virt/hyperv/vpci.rst
new file mode 100644
index 000000000000..b65b2126ede3
--- /dev/null
+++ linux-libre-6.8-gnu/Documentation/virt/hyperv/vpci.rst
@@ -0,0 +1,316 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+PCI pass-thru devices
+=========================
+In a Hyper-V guest VM, PCI pass-thru devices (also called
+virtual PCI devices, or vPCI devices) are physical PCI devices
+that are mapped directly into the VM's physical address space.
+Guest device drivers can interact directly with the hardware
+without intermediation by the host hypervisor.  This approach
+provides higher bandwidth access to the device with lower
+latency, compared with devices that are virtualized by the
+hypervisor.  The device should appear to the guest just as it
+would when running on bare metal, so no changes are required
+to the Linux device drivers for the device.
+
+Hyper-V terminology for vPCI devices is "Discrete Device
+Assignment" (DDA).  Public documentation for Hyper-V DDA is
+available here: `DDA`_
+
+.. _DDA: https://learn.microsoft.com/en-us/windows-server/virtualization/hyper-v/plan/plan-for-deploying-devices-using-discrete-device-assignment
+
+DDA is typically used for storage controllers, such as NVMe,
+and for GPUs.  A similar mechanism for NICs is called SR-IOV
+and produces the same benefits by allowing a guest device
+driver to interact directly with the hardware.  See Hyper-V
+public documentation here: `SR-IOV`_
+
+.. _SR-IOV: https://learn.microsoft.com/en-us/windows-hardware/drivers/network/overview-of-single-root-i-o-virtualization--sr-iov-
+
+This discussion of vPCI devices includes DDA and SR-IOV
+devices.
+
+Device Presentation
+-------------------
+Hyper-V provides full PCI functionality for a vPCI device when
+it is operating, so the Linux device driver for the device can
+be used unchanged, provided it uses the correct Linux kernel
+APIs for accessing PCI config space and for other integration
+with Linux.  But the initial detection of the PCI device and
+its integration with the Linux PCI subsystem must use Hyper-V
+specific mechanisms.  Consequently, vPCI devices on Hyper-V
+have a dual identity.  They are initially presented to Linux
+guests as VMBus devices via the standard VMBus "offer"
+mechanism, so they have a VMBus identity and appear under
+/sys/bus/vmbus/devices.  The VMBus vPCI driver in Linux at
+drivers/pci/controller/pci-hyperv.c handles a newly introduced
+vPCI device by fabricating a PCI bus topology and creating all
+the normal PCI device data structures in Linux that would
+exist if the PCI device were discovered via ACPI on a bare-
+metal system.  Once those data structures are set up, the
+device also has a normal PCI identity in Linux, and the normal
+Linux device driver for the vPCI device can function as if it
+were running in Linux on bare-metal.  Because vPCI devices are
+presented dynamically through the VMBus offer mechanism, they
+do not appear in the Linux guest's ACPI tables.  vPCI devices
+may be added to a VM or removed from a VM at any time during
+the life of the VM, and not just during initial boot.
+
+With this approach, the vPCI device is a VMBus device and a
+PCI device at the same time.  In response to the VMBus offer
+message, the hv_pci_probe() function runs and establishes a
+VMBus connection to the vPCI VSP on the Hyper-V host.  That
+connection has a single VMBus channel.  The channel is used to
+exchange messages with the vPCI VSP for the purpose of setting
+up and configuring the vPCI device in Linux.  Once the device
+is fully configured in Linux as a PCI device, the VMBus
+channel is used only if Linux changes the vCPU to be interrupted
+in the guest, or if the vPCI device is removed from
+the VM while the VM is running.  The ongoing operation of the
+device happens directly between the Linux device driver for
+the device and the hardware, with VMBus and the VMBus channel
+playing no role.
+
+PCI Device Setup
+----------------
+PCI device setup follows a sequence that Hyper-V originally
+created for Windows guests, and that can be ill-suited for
+Linux guests due to differences in the overall structure of
+the Linux PCI subsystem compared with Windows.  Nonetheless,
+with a bit of hackery in the Hyper-V virtual PCI driver for
+Linux, the virtual PCI device is setup in Linux so that
+generic Linux PCI subsystem code and the Linux driver for the
+device "just work".
+
+Each vPCI device is set up in Linux to be in its own PCI
+domain with a host bridge.  The PCI domainID is derived from
+bytes 4 and 5 of the instance GUID assigned to the VMBus vPCI
+device.  The Hyper-V host does not guarantee that these bytes
+are unique, so hv_pci_probe() has an algorithm to resolve
+collisions.  The collision resolution is intended to be stable
+across reboots of the same VM so that the PCI domainIDs don't
+change, as the domainID appears in the user space
+configuration of some devices.
+
+hv_pci_probe() allocates a guest MMIO range to be used as PCI
+config space for the device.  This MMIO range is communicated
+to the Hyper-V host over the VMBus channel as part of telling
+the host that the device is ready to enter d0.  See
+hv_pci_enter_d0().  When the guest subsequently accesses this
+MMIO range, the Hyper-V host intercepts the accesses and maps
+them to the physical device PCI config space.
+
+hv_pci_probe() also gets BAR information for the device from
+the Hyper-V host, and uses this information to allocate MMIO
+space for the BARs.  That MMIO space is then setup to be
+associated with the host bridge so that it works when generic
+PCI subsystem code in Linux processes the BARs.
+
+Finally, hv_pci_probe() creates the root PCI bus.  At this
+point the Hyper-V virtual PCI driver hackery is done, and the
+normal Linux PCI machinery for scanning the root bus works to
+detect the device, to perform driver matching, and to
+initialize the driver and device.
+
+PCI Device Removal
+------------------
+A Hyper-V host may initiate removal of a vPCI device from a
+guest VM at any time during the life of the VM.  The removal
+is instigated by an admin action taken on the Hyper-V host and
+is not under the control of the guest OS.
+
+A guest VM is notified of the removal by an unsolicited
+"Eject" message sent from the host to the guest over the VMBus
+channel associated with the vPCI device.  Upon receipt of such
+a message, the Hyper-V virtual PCI driver in Linux
+asynchronously invokes Linux kernel PCI subsystem calls to
+shutdown and remove the device.  When those calls are
+complete, an "Ejection Complete" message is sent back to
+Hyper-V over the VMBus channel indicating that the device has
+been removed.  At this point, Hyper-V sends a VMBus rescind
+message to the Linux guest, which the VMBus driver in Linux
+processes by removing the VMBus identity for the device.  Once
+that processing is complete, all vestiges of the device having
+been present are gone from the Linux kernel.  The rescind
+message also indicates to the guest that Hyper-V has stopped
+providing support for the vPCI device in the guest.  If the
+guest were to attempt to access that device's MMIO space, it
+would be an invalid reference. Hypercalls affecting the device
+return errors, and any further messages sent in the VMBus
+channel are ignored.
+
+After sending the Eject message, Hyper-V allows the guest VM
+60 seconds to cleanly shutdown the device and respond with
+Ejection Complete before sending the VMBus rescind
+message.  If for any reason the Eject steps don't complete
+within the allowed 60 seconds, the Hyper-V host forcibly
+performs the rescind steps, which will likely result in
+cascading errors in the guest because the device is now no
+longer present from the guest standpoint and accessing the
+device MMIO space will fail.
+
+Because ejection is asynchronous and can happen at any point
+during the guest VM lifecycle, proper synchronization in the
+Hyper-V virtual PCI driver is very tricky.  Ejection has been
+observed even before a newly offered vPCI device has been
+fully setup.  The Hyper-V virtual PCI driver has been updated
+several times over the years to fix race conditions when
+ejections happen at inopportune times. Care must be taken when
+modifying this code to prevent re-introducing such problems.
+See comments in the code.
+
+Interrupt Assignment
+--------------------
+The Hyper-V virtual PCI driver supports vPCI devices using
+MSI, multi-MSI, or MSI-X.  Assigning the guest vCPU that will
+receive the interrupt for a particular MSI or MSI-X message is
+complex because of the way the Linux setup of IRQs maps onto
+the Hyper-V interfaces.  For the single-MSI and MSI-X cases,
+Linux calls hv_compse_msi_msg() twice, with the first call
+containing a dummy vCPU and the second call containing the
+real vCPU.  Furthermore, hv_irq_unmask() is finally called
+(on x86) or the GICD registers are set (on arm64) to specify
+the real vCPU again.  Each of these three calls interact
+with Hyper-V, which must decide which physical CPU should
+receive the interrupt before it is forwarded to the guest VM.
+Unfortunately, the Hyper-V decision-making process is a bit
+limited, and can result in concentrating the physical
+interrupts on a single CPU, causing a performance bottleneck.
+See details about how this is resolved in the extensive
+comment above the function hv_compose_msi_req_get_cpu().
+
+The Hyper-V virtual PCI driver implements the
+irq_chip.irq_compose_msi_msg function as hv_compose_msi_msg().
+Unfortunately, on Hyper-V the implementation requires sending
+a VMBus message to the Hyper-V host and awaiting an interrupt
+indicating receipt of a reply message.  Since
+irq_chip.irq_compose_msi_msg can be called with IRQ locks
+held, it doesn't work to do the normal sleep until awakened by
+the interrupt. Instead hv_compose_msi_msg() must send the
+VMBus message, and then poll for the completion message. As
+further complexity, the vPCI device could be ejected/rescinded
+while the polling is in progress, so this scenario must be
+detected as well.  See comments in the code regarding this
+very tricky area.
+
+Most of the code in the Hyper-V virtual PCI driver (pci-
+hyperv.c) applies to Hyper-V and Linux guests running on x86
+and on arm64 architectures.  But there are differences in how
+interrupt assignments are managed.  On x86, the Hyper-V
+virtual PCI driver in the guest must make a hypercall to tell
+Hyper-V which guest vCPU should be interrupted by each
+MSI/MSI-X interrupt, and the x86 interrupt vector number that
+the x86_vector IRQ domain has picked for the interrupt.  This
+hypercall is made by hv_arch_irq_unmask().  On arm64, the
+Hyper-V virtual PCI driver manages the allocation of an SPI
+for each MSI/MSI-X interrupt.  The Hyper-V virtual PCI driver
+stores the allocated SPI in the architectural GICD registers,
+which Hyper-V emulates, so no hypercall is necessary as with
+x86.  Hyper-V does not support using LPIs for vPCI devices in
+arm64 guest VMs because it does not emulate a GICv3 ITS.
+
+The Hyper-V virtual PCI driver in Linux supports vPCI devices
+whose drivers create managed or unmanaged Linux IRQs.  If the
+smp_affinity for an unmanaged IRQ is updated via the /proc/irq
+interface, the Hyper-V virtual PCI driver is called to tell
+the Hyper-V host to change the interrupt targeting and
+everything works properly.  However, on x86 if the x86_vector
+IRQ domain needs to reassign an interrupt vector due to
+running out of vectors on a CPU, there's no path to inform the
+Hyper-V host of the change, and things break.  Fortunately,
+guest VMs operate in a constrained device environment where
+using all the vectors on a CPU doesn't happen. Since such a
+problem is only a theoretical concern rather than a practical
+concern, it has been left unaddressed.
+
+DMA
+---
+By default, Hyper-V pins all guest VM memory in the host
+when the VM is created, and programs the physical IOMMU to
+allow the VM to have DMA access to all its memory.  Hence
+it is safe to assign PCI devices to the VM, and allow the
+guest operating system to program the DMA transfers.  The
+physical IOMMU prevents a malicious guest from initiating
+DMA to memory belonging to the host or to other VMs on the
+host. From the Linux guest standpoint, such DMA transfers
+are in "direct" mode since Hyper-V does not provide a virtual
+IOMMU in the guest.
+
+Hyper-V assumes that physical PCI devices always perform
+cache-coherent DMA.  When running on x86, this behavior is
+required by the architecture.  When running on arm64, the
+architecture allows for both cache-coherent and
+non-cache-coherent devices, with the behavior of each device
+specified in the ACPI DSDT.  But when a PCI device is assigned
+to a guest VM, that device does not appear in the DSDT, so the
+Hyper-V VMBus driver propagates cache-coherency information
+from the VMBus node in the ACPI DSDT to all VMBus devices,
+including vPCI devices (since they have a dual identity as a VMBus
+device and as a PCI device).  See vmbus_dma_configure().
+Current Hyper-V versions always indicate that the VMBus is
+cache coherent, so vPCI devices on arm64 always get marked as
+cache coherent and the CPU does not perform any sync
+operations as part of dma_map/unmap_*() calls.
+
+vPCI protocol versions
+----------------------
+As previously described, during vPCI device setup and teardown
+messages are passed over a VMBus channel between the Hyper-V
+host and the Hyper-v vPCI driver in the Linux guest.  Some
+messages have been revised in newer versions of Hyper-V, so
+the guest and host must agree on the vPCI protocol version to
+be used.  The version is negotiated when communication over
+the VMBus channel is first established.  See
+hv_pci_protocol_negotiation(). Newer versions of the protocol
+extend support to VMs with more than 64 vCPUs, and provide
+additional information about the vPCI device, such as the
+guest virtual NUMA node to which it is most closely affined in
+the underlying hardware.
+
+Guest NUMA node affinity
+------------------------
+When the vPCI protocol version provides it, the guest NUMA
+node affinity of the vPCI device is stored as part of the Linux
+device information for subsequent use by the Linux driver. See
+hv_pci_assign_numa_node().  If the negotiated protocol version
+does not support the host providing NUMA affinity information,
+the Linux guest defaults the device NUMA node to 0.  But even
+when the negotiated protocol version includes NUMA affinity
+information, the ability of the host to provide such
+information depends on certain host configuration options.  If
+the guest receives NUMA node value "0", it could mean NUMA
+node 0, or it could mean "no information is available".
+Unfortunately it is not possible to distinguish the two cases
+from the guest side.
+
+PCI config space access in a CoCo VM
+------------------------------------
+Linux PCI device drivers access PCI config space using a
+standard set of functions provided by the Linux PCI subsystem.
+In Hyper-V guests these standard functions map to functions
+hv_pcifront_read_config() and hv_pcifront_write_config()
+in the Hyper-V virtual PCI driver.  In normal VMs,
+these hv_pcifront_*() functions directly access the PCI config
+space, and the accesses trap to Hyper-V to be handled.
+But in CoCo VMs, memory encryption prevents Hyper-V
+from reading the guest instruction stream to emulate the
+access, so the hv_pcifront_*() functions must invoke
+hypercalls with explicit arguments describing the access to be
+made.
+
+Config Block back-channel
+-------------------------
+The Hyper-V host and Hyper-V virtual PCI driver in Linux
+together implement a non-standard back-channel communication
+path between the host and guest.  The back-channel path uses
+messages sent over the VMBus channel associated with the vPCI
+device.  The functions hyperv_read_cfg_blk() and
+hyperv_write_cfg_blk() are the primary interfaces provided to
+other parts of the Linux kernel.  As of this writing, these
+interfaces are used only by the Mellanox mlx5 driver to pass
+diagnostic data to a Hyper-V host running in the Azure public
+cloud.  The functions hyperv_read_cfg_blk() and
+hyperv_write_cfg_blk() are implemented in a separate module
+(pci-hyperv-intf.c, under CONFIG_PCI_HYPERV_INTERFACE) that
+effectively stubs them out when running in non-Hyper-V
+environments.
diff --git linux-libre-6.7-gnu/Documentation/virt/kvm/api.rst linux-libre-6.8-gnu/Documentation/virt/kvm/api.rst
index 7025b3751027..09c7e585ff58 100644
--- linux-libre-6.7-gnu/Documentation/virt/kvm/api.rst
+++ linux-libre-6.8-gnu/Documentation/virt/kvm/api.rst
@@ -147,10 +147,29 @@ described as 'basic' will be available.
 The new VM has no virtual cpus and no memory.
 You probably want to use 0 as machine type.
 
+X86:
+^^^^
+
+Supported X86 VM types can be queried via KVM_CAP_VM_TYPES.
+
+S390:
+^^^^^
+
 In order to create user controlled virtual machines on S390, check
 KVM_CAP_S390_UCONTROL and use the flag KVM_VM_S390_UCONTROL as
 privileged user (CAP_SYS_ADMIN).
 
+MIPS:
+^^^^^
+
+To use hardware assisted virtualization on MIPS (VZ ASE) rather than
+the default trap & emulate implementation (which changes the virtual
+memory layout to fit in user mode), check KVM_CAP_MIPS_VZ and use the
+flag KVM_VM_MIPS_VZ.
+
+ARM64:
+^^^^^^
+
 On arm64, the physical address size for a VM (IPA Size limit) is limited
 to 40bits by default. The limit can be configured if the host supports the
 extension KVM_CAP_ARM_VM_IPA_SIZE. When supported, use
@@ -608,18 +627,6 @@ interrupt number dequeues the interrupt.
 This is an asynchronous vcpu ioctl and can be invoked from any thread.
 
 
-4.17 KVM_DEBUG_GUEST
---------------------
-
-:Capability: basic
-:Architectures: none
-:Type: vcpu ioctl
-:Parameters: none)
-:Returns: -1 on error
-
-Support for this has been removed.  Use KVM_SET_GUEST_DEBUG instead.
-
-
 4.18 KVM_GET_MSRS
 -----------------
 
@@ -6192,6 +6199,130 @@ to know what fields can be changed for the system register described by
 ``op0, op1, crn, crm, op2``. KVM rejects ID register values that describe a
 superset of the features supported by the system.
 
+4.140 KVM_SET_USER_MEMORY_REGION2
+---------------------------------
+
+:Capability: KVM_CAP_USER_MEMORY2
+:Architectures: all
+:Type: vm ioctl
+:Parameters: struct kvm_userspace_memory_region2 (in)
+:Returns: 0 on success, -1 on error
+
+KVM_SET_USER_MEMORY_REGION2 is an extension to KVM_SET_USER_MEMORY_REGION that
+allows mapping guest_memfd memory into a guest.  All fields shared with
+KVM_SET_USER_MEMORY_REGION identically.  Userspace can set KVM_MEM_GUEST_MEMFD
+in flags to have KVM bind the memory region to a given guest_memfd range of
+[guest_memfd_offset, guest_memfd_offset + memory_size].  The target guest_memfd
+must point at a file created via KVM_CREATE_GUEST_MEMFD on the current VM, and
+the target range must not be bound to any other memory region.  All standard
+bounds checks apply (use common sense).
+
+::
+
+  struct kvm_userspace_memory_region2 {
+	__u32 slot;
+	__u32 flags;
+	__u64 guest_phys_addr;
+	__u64 memory_size; /* bytes */
+	__u64 userspace_addr; /* start of the userspace allocated memory */
+	__u64 guest_memfd_offset;
+	__u32 guest_memfd;
+	__u32 pad1;
+	__u64 pad2[14];
+  };
+
+A KVM_MEM_GUEST_MEMFD region _must_ have a valid guest_memfd (private memory) and
+userspace_addr (shared memory).  However, "valid" for userspace_addr simply
+means that the address itself must be a legal userspace address.  The backing
+mapping for userspace_addr is not required to be valid/populated at the time of
+KVM_SET_USER_MEMORY_REGION2, e.g. shared memory can be lazily mapped/allocated
+on-demand.
+
+When mapping a gfn into the guest, KVM selects shared vs. private, i.e consumes
+userspace_addr vs. guest_memfd, based on the gfn's KVM_MEMORY_ATTRIBUTE_PRIVATE
+state.  At VM creation time, all memory is shared, i.e. the PRIVATE attribute
+is '0' for all gfns.  Userspace can control whether memory is shared/private by
+toggling KVM_MEMORY_ATTRIBUTE_PRIVATE via KVM_SET_MEMORY_ATTRIBUTES as needed.
+
+4.141 KVM_SET_MEMORY_ATTRIBUTES
+-------------------------------
+
+:Capability: KVM_CAP_MEMORY_ATTRIBUTES
+:Architectures: x86
+:Type: vm ioctl
+:Parameters: struct kvm_memory_attributes (in)
+:Returns: 0 on success, <0 on error
+
+KVM_SET_MEMORY_ATTRIBUTES allows userspace to set memory attributes for a range
+of guest physical memory.
+
+::
+
+  struct kvm_memory_attributes {
+	__u64 address;
+	__u64 size;
+	__u64 attributes;
+	__u64 flags;
+  };
+
+  #define KVM_MEMORY_ATTRIBUTE_PRIVATE           (1ULL << 3)
+
+The address and size must be page aligned.  The supported attributes can be
+retrieved via ioctl(KVM_CHECK_EXTENSION) on KVM_CAP_MEMORY_ATTRIBUTES.  If
+executed on a VM, KVM_CAP_MEMORY_ATTRIBUTES precisely returns the attributes
+supported by that VM.  If executed at system scope, KVM_CAP_MEMORY_ATTRIBUTES
+returns all attributes supported by KVM.  The only attribute defined at this
+time is KVM_MEMORY_ATTRIBUTE_PRIVATE, which marks the associated gfn as being
+guest private memory.
+
+Note, there is no "get" API.  Userspace is responsible for explicitly tracking
+the state of a gfn/page as needed.
+
+The "flags" field is reserved for future extensions and must be '0'.
+
+4.142 KVM_CREATE_GUEST_MEMFD
+----------------------------
+
+:Capability: KVM_CAP_GUEST_MEMFD
+:Architectures: none
+:Type: vm ioctl
+:Parameters: struct kvm_create_guest_memfd(in)
+:Returns: 0 on success, <0 on error
+
+KVM_CREATE_GUEST_MEMFD creates an anonymous file and returns a file descriptor
+that refers to it.  guest_memfd files are roughly analogous to files created
+via memfd_create(), e.g. guest_memfd files live in RAM, have volatile storage,
+and are automatically released when the last reference is dropped.  Unlike
+"regular" memfd_create() files, guest_memfd files are bound to their owning
+virtual machine (see below), cannot be mapped, read, or written by userspace,
+and cannot be resized  (guest_memfd files do however support PUNCH_HOLE).
+
+::
+
+  struct kvm_create_guest_memfd {
+	__u64 size;
+	__u64 flags;
+	__u64 reserved[6];
+  };
+
+Conceptually, the inode backing a guest_memfd file represents physical memory,
+i.e. is coupled to the virtual machine as a thing, not to a "struct kvm".  The
+file itself, which is bound to a "struct kvm", is that instance's view of the
+underlying memory, e.g. effectively provides the translation of guest addresses
+to host memory.  This allows for use cases where multiple KVM structures are
+used to manage a single virtual machine, e.g. when performing intrahost
+migration of a virtual machine.
+
+KVM currently only supports mapping guest_memfd via KVM_SET_USER_MEMORY_REGION2,
+and more specifically via the guest_memfd and guest_memfd_offset fields in
+"struct kvm_userspace_memory_region2", where guest_memfd_offset is the offset
+into the guest_memfd instance.  For a given guest_memfd file, there can be at
+most one mapping per page, i.e. binding multiple memory regions to a single
+guest_memfd range is not allowed (any number of memory regions can be bound to
+a single guest_memfd file, but the bound ranges must not overlap).
+
+See KVM_SET_USER_MEMORY_REGION2 for additional details.
+
 5. The kvm_run structure
 ========================
 
@@ -6824,6 +6955,30 @@ array field represents return values. The userspace should update the return
 values of SBI call before resuming the VCPU. For more details on RISC-V SBI
 spec refer, https://github.com/riscv/riscv-sbi-doc.
 
+::
+
+		/* KVM_EXIT_MEMORY_FAULT */
+		struct {
+  #define KVM_MEMORY_EXIT_FLAG_PRIVATE	(1ULL << 3)
+			__u64 flags;
+			__u64 gpa;
+			__u64 size;
+		} memory_fault;
+
+KVM_EXIT_MEMORY_FAULT indicates the vCPU has encountered a memory fault that
+could not be resolved by KVM.  The 'gpa' and 'size' (in bytes) describe the
+guest physical address range [gpa, gpa + size) of the fault.  The 'flags' field
+describes properties of the faulting access that are likely pertinent:
+
+ - KVM_MEMORY_EXIT_FLAG_PRIVATE - When set, indicates the memory fault occurred
+   on a private memory access.  When clear, indicates the fault occurred on a
+   shared access.
+
+Note!  KVM_EXIT_MEMORY_FAULT is unique among all KVM exit reasons in that it
+accompanies a return code of '-1', not '0'!  errno will always be set to EFAULT
+or EHWPOISON when KVM exits with KVM_EXIT_MEMORY_FAULT, userspace should assume
+kvm_run.exit_reason is stale/undefined for all other error numbers.
+
 ::
 
     /* KVM_EXIT_NOTIFY */
@@ -7858,6 +8013,27 @@ This capability is aimed to mitigate the threat that malicious VMs can
 cause CPU stuck (due to event windows don't open up) and make the CPU
 unavailable to host or other VMs.
 
+7.34 KVM_CAP_MEMORY_FAULT_INFO
+------------------------------
+
+:Architectures: x86
+:Returns: Informational only, -EINVAL on direct KVM_ENABLE_CAP.
+
+The presence of this capability indicates that KVM_RUN will fill
+kvm_run.memory_fault if KVM cannot resolve a guest page fault VM-Exit, e.g. if
+there is a valid memslot but no backing VMA for the corresponding host virtual
+address.
+
+The information in kvm_run.memory_fault is valid if and only if KVM_RUN returns
+an error with errno=EFAULT or errno=EHWPOISON *and* kvm_run.exit_reason is set
+to KVM_EXIT_MEMORY_FAULT.
+
+Note: Userspaces which attempt to resolve memory faults so that they can retry
+KVM_RUN are encouraged to guard against repeatedly receiving the same
+error/annotated fault.
+
+See KVM_EXIT_MEMORY_FAULT for more information.
+
 8. Other capabilities.
 ======================
 
@@ -8374,6 +8550,7 @@ PVHVM guests. Valid flags are::
   #define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL		(1 << 4)
   #define KVM_XEN_HVM_CONFIG_EVTCHN_SEND		(1 << 5)
   #define KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG	(1 << 6)
+  #define KVM_XEN_HVM_CONFIG_PVCLOCK_TSC_UNSTABLE	(1 << 7)
 
 The KVM_XEN_HVM_CONFIG_HYPERCALL_MSR flag indicates that the KVM_XEN_HVM_CONFIG
 ioctl is available, for the guest to set its hypercall page.
@@ -8417,6 +8594,11 @@ behave more correctly, not using the XEN_RUNSTATE_UPDATE flag until/unless
 specifically enabled (by the guest making the hypercall, causing the VMM
 to enable the KVM_XEN_ATTR_TYPE_RUNSTATE_UPDATE_FLAG attribute).
 
+The KVM_XEN_HVM_CONFIG_PVCLOCK_TSC_UNSTABLE flag indicates that KVM supports
+clearing the PVCLOCK_TSC_STABLE_BIT flag in Xen pvclock sources. This will be
+done when the KVM_CAP_XEN_HVM ioctl sets the
+KVM_XEN_HVM_CONFIG_PVCLOCK_TSC_UNSTABLE flag.
+
 8.31 KVM_CAP_PPC_MULTITCE
 -------------------------
 
@@ -8596,6 +8778,24 @@ block sizes is exposed in KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES as a
 64-bit bitmap (each bit describing a block size). The default value is
 0, to disable the eager page splitting.
 
+8.41 KVM_CAP_VM_TYPES
+---------------------
+
+:Capability: KVM_CAP_MEMORY_ATTRIBUTES
+:Architectures: x86
+:Type: system ioctl
+
+This capability returns a bitmap of support VM types.  The 1-setting of bit @n
+means the VM type with value @n is supported.  Possible values of @n are::
+
+  #define KVM_X86_DEFAULT_VM	0
+  #define KVM_X86_SW_PROTECTED_VM	1
+
+Note, KVM_X86_SW_PROTECTED_VM is currently only for development and testing.
+Do not use KVM_X86_SW_PROTECTED_VM for "real" VMs, and especially not in
+production.  The behavior and effective ABI for software-protected VMs is
+unstable.
+
 9. Known KVM API problems
 =========================
 
diff --git linux-libre-6.7-gnu/Documentation/virt/kvm/locking.rst linux-libre-6.8-gnu/Documentation/virt/kvm/locking.rst
index 3a034db5e55f..02880d5552d5 100644
--- linux-libre-6.7-gnu/Documentation/virt/kvm/locking.rst
+++ linux-libre-6.8-gnu/Documentation/virt/kvm/locking.rst
@@ -43,10 +43,9 @@ On x86:
 
 - vcpu->mutex is taken outside kvm->arch.hyperv.hv_lock and kvm->arch.xen.xen_lock
 
-- kvm->arch.mmu_lock is an rwlock.  kvm->arch.tdp_mmu_pages_lock and
-  kvm->arch.mmu_unsync_pages_lock are taken inside kvm->arch.mmu_lock, and
-  cannot be taken without already holding kvm->arch.mmu_lock (typically with
-  ``read_lock`` for the TDP MMU, thus the need for additional spinlocks).
+- kvm->arch.mmu_lock is an rwlock; critical sections for
+  kvm->arch.tdp_mmu_pages_lock and kvm->arch.mmu_unsync_pages_lock must
+  also take kvm->arch.mmu_lock
 
 Everything else is a leaf: no other lock is taken inside the critical
 sections.
diff --git linux-libre-6.7-gnu/MAINTAINERS linux-libre-6.8-gnu/MAINTAINERS
index a7c4cf8201e0..1aabf1c15bb3 100644
--- linux-libre-6.7-gnu/MAINTAINERS
+++ linux-libre-6.8-gnu/MAINTAINERS
@@ -441,6 +441,13 @@ W:	http://wiki.analog.com/AD7879
 W:	https://ez.analog.com/linux-software-drivers
 F:	drivers/input/touchscreen/ad7879.c
 
+ADAFRUIT MINI I2C GAMEPAD
+M:	Anshul Dalal <anshulusr@gmail.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml
+F:	drivers/input/joystick/adafruit-seesaw.c
+
 ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR)
 M:	Jiri Kosina <jikos@kernel.org>
 S:	Maintained
@@ -699,6 +706,15 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/media/allegro,al5e.yaml
 F:	drivers/media/platform/allegro-dvt/
 
+ALLIED VISION ALVIUM CAMERA DRIVER
+M:	Tommaso Merciai <tomm.merciai@gmail.com>
+M:	Martin Hecht <martin.hecht@avnet.eu>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml
+F:	drivers/media/i2c/alvium-csi2.c
+F:	drivers/media/i2c/alvium-csi2.h
+
 ALLWINNER A10 CSI DRIVER
 M:	Maxime Ripard <mripard@kernel.org>
 L:	linux-media@vger.kernel.org
@@ -881,6 +897,14 @@ Q:	https://patchwork.kernel.org/project/linux-rdma/list/
 F:	drivers/infiniband/hw/efa/
 F:	include/uapi/rdma/efa-abi.h
 
+AMD AXI W1 DRIVER
+M:	Kris Chaplin <kris.chaplin@amd.com>
+R:	Thomas Delev <thomas.delev@amd.com>
+R:	Michal Simek <michal.simek@amd.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
+F:	drivers/w1/masters/amd_axi_w1.c
+
 AMD CDX BUS DRIVER
 M:	Nipun Gupta <nipun.gupta@amd.com>
 M:	Nikhil Agarwal <nikhil.agarwal@amd.com>
@@ -1114,6 +1138,14 @@ F:	Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
 F:	drivers/iio/adc/ad4130.c
 
+ANALOG DEVICES INC AD7091R DRIVER
+M:	Marcelo Schmitt <marcelo.schmitt@analog.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+W:	http://ez.analog.com/community/linux-device-drivers
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad7091r*
+F:	drivers/iio/adc/drivers/iio/adc/ad7091r*
+
 ANALOG DEVICES INC AD7192 DRIVER
 M:	Alexandru Tachici <alexandru.tachici@analog.com>
 L:	linux-iio@vger.kernel.org
@@ -1363,6 +1395,7 @@ F:	drivers/hwmon/max31760.c
 
 ANALOGBITS PLL LIBRARIES
 M:	Paul Walmsley <paul.walmsley@sifive.com>
+M:	Samuel Holland <samuel.holland@sifive.com>
 S:	Supported
 F:	drivers/clk/analogbits/*
 F:	include/linux/clk/analogbits*
@@ -1684,11 +1717,6 @@ S:	Odd Fixes
 F:	drivers/amba/
 F:	include/linux/amba/bus.h
 
-ARM PRIMECELL CLCD PL110 DRIVER
-M:	Russell King <linux@armlinux.org.uk>
-S:	Odd Fixes
-F:	drivers/video/fbdev/amba-clcd.*
-
 ARM PRIMECELL KMI PL050 DRIVER
 M:	Russell King <linux@armlinux.org.uk>
 S:	Odd Fixes
@@ -1931,7 +1959,6 @@ F:	drivers/i2c/busses/i2c-pasemi-platform.c
 F:	drivers/iommu/apple-dart.c
 F:	drivers/iommu/io-pgtable-dart.c
 F:	drivers/irqchip/irq-apple-aic.c
-F:	drivers/mailbox/apple-mailbox.c
 F:	drivers/nvme/host/apple.c
 F:	drivers/nvmem/apple-efuses.c
 F:	drivers/pinctrl/pinctrl-apple-gpio.c
@@ -1940,7 +1967,6 @@ F:	drivers/soc/apple/*
 F:	drivers/watchdog/apple_wdt.c
 F:	include/dt-bindings/interrupt-controller/apple-aic.h
 F:	include/dt-bindings/pinctrl/apple.h
-F:	include/linux/apple-mailbox.h
 F:	include/linux/soc/apple/*
 
 ARM/ARTPEC MACHINE SUPPORT
@@ -2017,11 +2043,6 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Odd Fixes
 N:	clps711x
 
-ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
-M:	Lennert Buytenhek <kernel@wantstofly.org>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-
 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
 M:	Hartley Sweeten <hsweeten@visionengravers.com>
 M:	Alexander Sverdlin <alexander.sverdlin@gmail.com>
@@ -2051,7 +2072,6 @@ ARM/CORESIGHT FRAMEWORK AND DRIVERS
 M:	Suzuki K Poulose <suzuki.poulose@arm.com>
 R:	Mike Leach <mike.leach@linaro.org>
 R:	James Clark <james.clark@arm.com>
-R:	Leo Yan <leo.yan@linaro.org>
 L:	coresight@lists.linaro.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -2137,7 +2157,7 @@ M:	Shawn Guo <shawnguo@kernel.org>
 M:	Sascha Hauer <s.hauer@pengutronix.de>
 R:	Pengutronix Kernel Team <kernel@pengutronix.de>
 R:	Fabio Estevam <festevam@gmail.com>
-R:	NXP Linux Team <linux-imx@nxp.com>
+L:	imx@lists.linux.dev
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
@@ -2307,6 +2327,7 @@ F:	arch/arm/mach-dove/
 F:	arch/arm/mach-mv78xx0/
 F:	arch/arm/mach-orion5x/
 F:	arch/arm/plat-orion/
+F:	drivers/bus/mvebu-mbus.c
 F:	drivers/soc/dove/
 
 ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SOC support
@@ -2321,8 +2342,7 @@ F:	arch/arm/boot/dts/marvell/armada*
 F:	arch/arm/boot/dts/marvell/kirkwood*
 F:	arch/arm/configs/mvebu_*_defconfig
 F:	arch/arm/mach-mvebu/
-F:	arch/arm64/boot/dts/marvell/armada*
-F:	arch/arm64/boot/dts/marvell/cn913*
+F:	arch/arm64/boot/dts/marvell/
 F:	drivers/clk/mvebu/
 F:	drivers/cpufreq/armada-37xx-cpufreq.c
 F:	drivers/cpufreq/armada-8k-cpufreq.c
@@ -2394,7 +2414,6 @@ F:	drivers/memory/atmel*
 F:	drivers/watchdog/sama5d4_wdt.c
 F:	include/soc/at91/
 X:	drivers/input/touchscreen/atmel_mxt_ts.c
-X:	drivers/net/wireless/atmel/
 N:	at91
 N:	atmel
 
@@ -2546,7 +2565,6 @@ F:	arch/arm64/boot/dts/qcom/sc7280*
 F:	arch/arm64/boot/dts/qcom/sdm845-cheza*
 
 ARM/QUALCOMM SUPPORT
-M:	Andy Gross <agross@kernel.org>
 M:	Bjorn Andersson <andersson@kernel.org>
 M:	Konrad Dybcio <konrad.dybcio@linaro.org>
 L:	linux-arm-msm@vger.kernel.org
@@ -2826,7 +2844,6 @@ F:	Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.ya
 F:	Documentation/devicetree/bindings/reset/sunplus,reset.yaml
 F:	arch/arm/boot/dts/sunplus/
 F:	arch/arm/configs/sp7021_*defconfig
-F:	arch/arm/mach-sunplus/
 F:	drivers/clk/clk-sp7021.c
 F:	drivers/irqchip/irq-sp7021-intc.c
 F:	drivers/reset/reset-sunplus.c
@@ -2842,11 +2859,6 @@ F:	arch/arm/boot/dts/synaptics/
 F:	arch/arm/mach-berlin/
 F:	arch/arm64/boot/dts/synaptics/
 
-ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
-M:	Lennert Buytenhek <kernel@wantstofly.org>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-
 ARM/TEGRA HDMI CEC SUBSYSTEM SUPPORT
 M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-tegra@vger.kernel.org
@@ -2863,11 +2875,6 @@ L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
 F:	arch/arm64/boot/dts/tesla/
 
-ARM/TETON BGA MACHINE SUPPORT
-M:	"Mark F. Brown" <mark.brown314@gmail.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-
 ARM/TEXAS INSTRUMENT AEMIF/EMIF DRIVERS
 M:	Santosh Shilimkar <ssantosh@kernel.org>
 L:	linux-kernel@vger.kernel.org
@@ -2946,7 +2953,6 @@ F:	Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
 F:	Documentation/devicetree/bindings/soc/socionext/socionext,uniphier*.yaml
 F:	arch/arm/boot/dts/socionext/uniphier*
 F:	arch/arm/include/asm/hardware/cache-uniphier.h
-F:	arch/arm/mach-uniphier/
 F:	arch/arm/mm/cache-uniphier.c
 F:	arch/arm64/boot/dts/socionext/uniphier*
 F:	drivers/bus/uniphier-system-bus.c
@@ -3009,6 +3015,7 @@ F:	Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
 F:	Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
 F:	Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
 F:	Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
+F:	Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
 F:	Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
 F:	arch/arm/mach-zynq/
 F:	drivers/clocksource/timer-cadence-ttc.c
@@ -3060,6 +3067,13 @@ S:	Supported
 W:	http://www.akm.com/
 F:	drivers/iio/magnetometer/ak8974.c
 
+AOSONG AGS02MA TVOC SENSOR DRIVER
+M:	Anshul Dalal <anshulusr@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml
+F:	drivers/iio/chemical/ags02ma.c
+
 ASC7621 HARDWARE MONITOR DRIVER
 M:	George Joseph <george.joseph@fairview5.com>
 L:	linux-hwmon@vger.kernel.org
@@ -3073,6 +3087,14 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/net/asix,ax88796c.yaml
 F:	drivers/net/ethernet/asix/ax88796c_*
 
+ASIX PHY DRIVER [RUST]
+M:	FUJITA Tomonori <fujita.tomonori@gmail.com>
+R:	Trevor Gross <tmgross@umich.edu>
+L:	netdev@vger.kernel.org
+L:	rust-for-linux@vger.kernel.org
+S:	Maintained
+F:	drivers/net/phy/ax88796b_rust.rs
+
 ASPEED CRYPTO DRIVER
 M:	Neal Liu <neal_liu@aspeedtech.com>
 L:	linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
@@ -3147,10 +3169,10 @@ F:	drivers/hwmon/asus-ec-sensors.c
 
 ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
 M:	Corentin Chary <corentin.chary@gmail.com>
-L:	acpi4asus-user@lists.sourceforge.net
+M:	Luke D. Jones <luke@ljones.dev>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-W:	http://acpi4asus.sf.net
+W:	https://asus-linux.org/
 F:	drivers/platform/x86/asus*.c
 F:	drivers/platform/x86/eeepc*.c
 
@@ -3298,13 +3320,6 @@ T:	git git://github.com/ndyer/linux.git
 F:	Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
 F:	drivers/input/touchscreen/atmel_mxt_ts.c
 
-ATMEL WIRELESS DRIVER
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
-W:	http://www.thekelleys.org.uk/atmel
-W:	http://atmelwlandriver.sourceforge.net/
-F:	drivers/net/wireless/atmel/atmel*
-
 ATOMIC INFRASTRUCTURE
 M:	Will Deacon <will@kernel.org>
 M:	Peter Zijlstra <peterz@infradead.org>
@@ -3339,13 +3354,17 @@ M:	Eric Paris <eparis@redhat.com>
 L:	audit@vger.kernel.org
 S:	Supported
 W:	https://github.com/linux-audit
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit.git
+Q:	https://patchwork.kernel.org/project/audit/list
+B:	mailto:audit@vger.kernel.org
+P:	https://github.com/linux-audit/audit-kernel/blob/main/README.md
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit.git
 F:	include/asm-generic/audit_*.h
 F:	include/linux/audit.h
 F:	include/linux/audit_arch.h
 F:	include/uapi/linux/audit.h
 F:	kernel/audit*
 F:	lib/*audit.c
+K:	\baudit_[a-z_0-9]\+\b
 
 AUXILIARY BUS DRIVER
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@@ -3372,9 +3391,8 @@ F:	Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
 F:	drivers/iio/adc/hx711.c
 
 AX.25 NETWORK LAYER
-M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
-S:	Maintained
+S:	Orphan
 W:	https://linux-ax25.in-berlin.de
 F:	include/net/ax25.h
 F:	include/uapi/linux/ax25.h
@@ -3404,6 +3422,16 @@ W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
 F:	drivers/hwmon/axi-fan-control.c
 
+AXI SPI ENGINE
+M:	Michael Hennerich <michael.hennerich@analog.com>
+M:	Nuno Sá <nuno.sa@analog.com>
+R:	David Lechner <dlechner@baylibre.com>
+L:	linux-spi@vger.kernel.org
+S:	Supported
+W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/devicetree/bindings/spi/adi,axi-spi-engine.yaml
+F:	drivers/spi/spi-axi-spi-engine.c
+
 AXXIA I2C CONTROLLER
 M:	Krzysztof Adamski <krzysztof.adamski@nokia.com>
 L:	linux-i2c@vger.kernel.org
@@ -3456,6 +3484,14 @@ F:	drivers/video/backlight/
 F:	include/linux/backlight.h
 F:	include/linux/pwm_backlight.h
 
+BAIKAL-T1 PVT HARDWARE MONITOR DRIVER
+M:	Serge Semin <fancer.lancer@gmail.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
+F:	Documentation/hwmon/bt1-pvt.rst
+F:	drivers/hwmon/bt1-pvt.[ch]
+
 BARCO P50 GPIO DRIVER
 M:	Santosh Kumar Yadav <santoshkumar.yadav@barco.com>
 M:	Peter Korsgaard <peter.korsgaard@barco.com>
@@ -3488,7 +3524,7 @@ F:	drivers/net/hamradio/baycom*
 
 BCACHE (BLOCK LAYER CACHE)
 M:	Coly Li <colyli@suse.de>
-M:	Kent Overstreet <kent.overstreet@gmail.com>
+M:	Kent Overstreet <kent.overstreet@linux.dev>
 L:	linux-bcache@vger.kernel.org
 S:	Maintained
 W:	http://bcache.evilpiepirate.org
@@ -3595,7 +3631,6 @@ F:	drivers/mtd/devices/block2mtd.c
 
 BLUETOOTH DRIVERS
 M:	Marcel Holtmann <marcel@holtmann.org>
-M:	Johan Hedberg <johan.hedberg@gmail.com>
 M:	Luiz Augusto von Dentz <luiz.dentz@gmail.com>
 L:	linux-bluetooth@vger.kernel.org
 S:	Supported
@@ -3636,6 +3671,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
 F:	drivers/iio/accel/bma400*
 
+BOSCH SENSORTEC BMI323 IMU IIO DRIVER
+M:	Jagath Jog J <jagathjog1996@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml
+F:	drivers/iio/imu/bmi323/
+
 BPF JIT for ARM
 M:	Russell King <linux@armlinux.org.uk>
 M:	Puranjay Mohan <puranjay12@gmail.com>
@@ -3651,6 +3693,13 @@ L:	bpf@vger.kernel.org
 S:	Supported
 F:	arch/arm64/net/
 
+BPF JIT for LOONGARCH
+M:	Tiezhu Yang <yangtiezhu@loongson.cn>
+R:	Hengqi Chen <hengqi.chen@gmail.com>
+L:	bpf@vger.kernel.org
+S:	Maintained
+F:	arch/loongarch/net/
+
 BPF JIT for MIPS (32-BIT AND 64-BIT)
 M:	Johan Almbladh <johan.almbladh@anyfinetworks.com>
 M:	Paul Burton <paulburton@kernel.org>
@@ -4121,14 +4170,14 @@ F:	drivers/firmware/broadcom/tee_bnxt_fw.c
 F:	drivers/net/ethernet/broadcom/bnxt/
 F:	include/linux/firmware/broadcom/tee_bnxt_fw.h
 
-BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
-M:	Arend van Spriel <aspriel@gmail.com>
-M:	Franky Lin <franky.lin@broadcom.com>
-M:	Hante Meuleman <hante.meuleman@broadcom.com>
+BROADCOM BRCM80211 IEEE802.11 WIRELESS DRIVERS
+M:	Arend van Spriel <arend.vanspriel@broadcom.com>
 L:	linux-wireless@vger.kernel.org
+L:	brcm80211@lists.linux.dev
 L:	brcm80211-dev-list.pdl@broadcom.com
 S:	Supported
 F:	drivers/net/wireless/broadcom/brcm80211/
+F:	include/linux/platform_data/brcmfmac.h
 
 BROADCOM BRCMSTB GPIO DRIVER
 M:	Doug Berger <opendmb@gmail.com>
@@ -4499,7 +4548,7 @@ F:	drivers/net/ieee802154/ca8210.c
 
 CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
 M:	David Howells <dhowells@redhat.com>
-L:	linux-cachefs@redhat.com (moderated for non-subscribers)
+L:	netfs@lists.linux.dev
 S:	Supported
 F:	Documentation/filesystems/caching/cachefiles.rst
 F:	fs/cachefiles/
@@ -4683,11 +4732,8 @@ F:	drivers/i2c/busses/i2c-octeon*
 F:	drivers/i2c/busses/i2c-thunderx*
 
 CAVIUM LIQUIDIO NETWORK DRIVER
-M:	Derek Chickles <dchickles@marvell.com>
-M:	Satanand Burla <sburla@marvell.com>
-M:	Felix Manlunas <fmanlunas@marvell.com>
 L:	netdev@vger.kernel.org
-S:	Supported
+S:	Orphan
 W:	http://www.marvell.com
 F:	drivers/net/ethernet/cavium/liquidio/
 
@@ -5157,7 +5203,7 @@ M:	Philipp Zabel <p.zabel@pengutronix.de>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/media/coda.yaml
-F:	drivers/media/platform/chips-media/
+F:	drivers/media/platform/chips-media/coda
 
 CODE OF CONDUCT
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@@ -5191,7 +5237,7 @@ X:	drivers/clk/clkdev.c
 COMMON INTERNET FILE SYSTEM CLIENT (CIFS and SMB3)
 M:	Steve French <sfrench@samba.org>
 R:	Paulo Alcantara <pc@manguebit.com> (DFS, global name space)
-R:	Ronnie Sahlberg <lsahlber@redhat.com> (directory leases, sparse files)
+R:	Ronnie Sahlberg <ronniesahlberg@gmail.com> (directory leases, sparse files)
 R:	Shyam Prasad N <sprasad@microsoft.com> (multichannel)
 R:	Tom Talpey <tom@talpey.com> (RDMA, smbdirect)
 L:	linux-cifs@vger.kernel.org
@@ -5244,6 +5290,7 @@ M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-cxl@vger.kernel.org
 S:	Maintained
 F:	drivers/cxl/
+F:	include/linux/cxl-event.h
 F:	include/uapi/linux/cxl_mem.h
 F:	tools/testing/cxl/
 
@@ -5261,10 +5308,10 @@ W:	http://accessrunner.sourceforge.net/
 F:	drivers/usb/atm/cxacru.c
 
 CONFIDENTIAL COMPUTING THREAT MODEL FOR X86 VIRTUALIZATION (SNP/TDX)
-M:    Elena Reshetova <elena.reshetova@intel.com>
-M:    Carlos Bilbao <carlos.bilbao@amd.com>
-S:    Maintained
-F:    Documentation/security/snp-tdx-threat-model.rst
+M:	Elena Reshetova <elena.reshetova@intel.com>
+M:	Carlos Bilbao <carlos.bilbao@amd.com>
+S:	Maintained
+F:	Documentation/security/snp-tdx-threat-model.rst
 
 CONFIGFS
 M:	Joel Becker <jlbec@evilplan.org>
@@ -5332,13 +5379,14 @@ CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)
 M:	Johannes Weiner <hannes@cmpxchg.org>
 M:	Michal Hocko <mhocko@kernel.org>
 M:	Roman Gushchin <roman.gushchin@linux.dev>
-M:	Shakeel Butt <shakeelb@google.com>
+M:	Shakeel Butt <shakeel.butt@linux.dev>
 R:	Muchun Song <muchun.song@linux.dev>
 L:	cgroups@vger.kernel.org
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/memcontrol.c
 F:	mm/swap_cgroup.c
+F:	samples/cgroup/*
 F:	tools/testing/selftests/cgroup/memcg_protection.m
 F:	tools/testing/selftests/cgroup/test_hugetlb_memcg.c
 F:	tools/testing/selftests/cgroup/test_kmem.c
@@ -5376,6 +5424,12 @@ F:	include/linux/counter.h
 F:	include/uapi/linux/counter.h
 F:	tools/counter/
 
+COUNTER WATCH EVENTS TOOL
+M:	Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	tools/counter/counter_watch_events.c
+
 CP2615 I2C DRIVER
 M:	Bence Csókás <bence98@sch.bme.hu>
 S:	Maintained
@@ -5523,6 +5577,12 @@ F:	include/crypto/
 F:	include/linux/crypto*
 F:	lib/crypto/
 
+CRYPTO SPEED TEST COMPARE
+M:	Wang Jinchao <wangjinchao@xfusion.com>
+L:	linux-crypto@vger.kernel.org
+S:	Maintained
+F:	tools/crypto/tcrypt/tcrypt_speed_compare.py
+
 CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
 M:	Neil Horman <nhorman@tuxdriver.com>
 L:	linux-crypto@vger.kernel.org
@@ -5551,6 +5611,11 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
 F:	drivers/net/can/ctucanfd/
 
+CVE ASSIGNMENT CONTACT
+M:	CVE Assignment Team <cve@kernel.org>
+S:	Maintained
+F:	Documentation/process/cve.rst
+
 CW1200 WLAN driver
 S:	Orphan
 F:	drivers/net/wireless/st/cw1200/
@@ -5882,7 +5947,7 @@ DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
 M:	Stuart Hayes <stuart.w.hayes@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-F:	Documentation/driver-api/dcdbas.rst
+F:	Documentation/userspace-api/dcdbas.rst
 F:	drivers/platform/x86/dell/dcdbas.*
 
 DELL WMI DDV DRIVER
@@ -5899,7 +5964,6 @@ S:	Maintained
 F:	drivers/platform/x86/dell/dell-wmi-descriptor.c
 
 DELL WMI HARDWARE PRIVACY SUPPORT
-M:	Perry Yuan <Perry.Yuan@dell.com>
 L:	Dell.Client.Kernel@dell.com
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
@@ -6096,7 +6160,7 @@ F:	Documentation/devicetree/bindings/regulator/dlg,da9*.yaml
 F:	Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml
 F:	Documentation/devicetree/bindings/sound/da[79]*.txt
 F:	Documentation/devicetree/bindings/thermal/da90??-thermal.txt
-F:	Documentation/devicetree/bindings/watchdog/da90??-wdt.txt
+F:	Documentation/devicetree/bindings/watchdog/dlg,da90??-watchdog.yaml
 F:	Documentation/hwmon/da90??.rst
 F:	drivers/gpio/gpio-da90??.c
 F:	drivers/hwmon/da90??-hwmon.c
@@ -6482,8 +6546,7 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/gpu/drm/sun4i/sun8i*
 
 DRM DRIVER FOR ARM PL111 CLCD
-M:	Emma Anholt <emma@anholt.net>
-S:	Supported
+S:	Orphan
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/gpu/drm/pl111/
 
@@ -6598,8 +6661,7 @@ F:	Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
 F:	drivers/gpu/drm/panel/panel-himax-hx8394.c
 
 DRM DRIVER FOR HX8357D PANELS
-M:	Emma Anholt <emma@anholt.net>
-S:	Maintained
+S:	Orphan
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/himax,hx8357d.txt
 F:	drivers/gpu/drm/tiny/hx8357d.c
@@ -6626,6 +6688,12 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
 F:	drivers/gpu/drm/tiny/ili9486.c
 
+DRM DRIVER FOR ILITEK ILI9805 PANELS
+M:	Michael Trimarchi <michael@amarulasolutions.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml
+F:	drivers/gpu/drm/panel/panel-ilitek-ili9805.c
+
 DRM DRIVER FOR JADARD JD9365DA-H3 MIPI-DSI LCD PANELS
 M:	Jagan Teki <jagan@edgeble.ai>
 S:	Maintained
@@ -6854,6 +6922,12 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/ste,mcde.yaml
 F:	drivers/gpu/drm/mcde/
 
+DRM DRIVER FOR SYNAPTICS R63353 PANELS
+M:	Michael Trimarchi <michael@amarulasolutions.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml
+F:	drivers/gpu/drm/panel/panel-synaptics-r63353.c
+
 DRM DRIVER FOR TI DLPC3433 MIPI DSI TO DMD BRIDGE
 M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
@@ -7138,6 +7212,7 @@ F:	include/linux/platform_data/shmob_drm.h
 DRM DRIVERS FOR ROCKCHIP
 M:	Sandy Huang <hjc@rock-chips.com>
 M:	Heiko Stübner <heiko@sntech.de>
+M:	Andy Yan <andy.yan@rock-chips.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 T:	git git://anongit.freedesktop.org/drm/drm-misc
@@ -7192,8 +7267,8 @@ F:	Documentation/devicetree/bindings/display/ti/
 F:	drivers/gpu/drm/omapdrm/
 
 DRM DRIVERS FOR V3D
-M:	Emma Anholt <emma@anholt.net>
 M:	Melissa Wen <mwen@igalia.com>
+M:	Maíra Canal <mcanal@igalia.com>
 S:	Supported
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
@@ -7201,7 +7276,6 @@ F:	drivers/gpu/drm/v3d/
 F:	include/uapi/drm/v3d_drm.h
 
 DRM DRIVERS FOR VC4
-M:	Emma Anholt <emma@anholt.net>
 M:	Maxime Ripard <mripard@kernel.org>
 S:	Supported
 T:	git git://github.com/anholt/linux
@@ -7878,12 +7952,21 @@ F:	include/uapi/linux/mdio.h
 F:	include/uapi/linux/mii.h
 F:	net/core/of_net.c
 
-EXEC & BINFMT API
+ETHERNET PHY LIBRARY [RUST]
+M:	FUJITA Tomonori <fujita.tomonori@gmail.com>
+R:	Trevor Gross <tmgross@umich.edu>
+L:	netdev@vger.kernel.org
+L:	rust-for-linux@vger.kernel.org
+S:	Maintained
+F:	rust/kernel/net/phy.rs
+
+EXEC & BINFMT API, ELF
 R:	Eric Biederman <ebiederm@xmission.com>
 R:	Kees Cook <keescook@chromium.org>
 L:	linux-mm@kvack.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/execve
+F:	Documentation/userspace-api/ELF.rst
 F:	fs/*binfmt_*.c
 F:	fs/exec.c
 F:	include/linux/binfmts.h
@@ -7925,6 +8008,7 @@ F:	include/uapi/linux/ext4.h
 
 Extended Verification Module (EVM)
 M:	Mimi Zohar <zohar@linux.ibm.com>
+M:	Roberto Sassu <roberto.sassu@huawei.com>
 L:	linux-integrity@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity.git
@@ -8103,6 +8187,7 @@ F:	include/trace/events/fs_dax.h
 FILESYSTEMS (VFS and infrastructure)
 M:	Alexander Viro <viro@zeniv.linux.org.uk>
 M:	Christian Brauner <brauner@kernel.org>
+R:	Jan Kara <jack@suse.cz>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	fs/*
@@ -8123,6 +8208,16 @@ F:	fs/exportfs/
 F:	fs/fhandle.c
 F:	include/linux/exportfs.h
 
+FILESYSTEMS [IDMAPPED MOUNTS]
+M:	Christian Brauner <brauner@kernel.org>
+M:	Seth Forshee <sforshee@kernel.org>
+L:	linux-fsdevel@vger.kernel.org
+S:	Maintained
+F:	Documentation/filesystems/idmappings.rst
+F:	fs/mnt_idmapping.c
+F:	include/linux/mnt_idmapping.*
+F:	tools/testing/selftests/mount_setattr/
+
 FILESYSTEMS [IOMAP]
 M:	Christian Brauner <brauner@kernel.org>
 R:	Darrick J. Wong <djwong@kernel.org>
@@ -8132,6 +8227,29 @@ S:	Supported
 F:	fs/iomap/
 F:	include/linux/iomap.h
 
+FILESYSTEMS [NETFS LIBRARY]
+M:	David Howells <dhowells@redhat.com>
+R:	Jeff Layton <jlayton@kernel.org>
+L:	netfs@lists.linux.dev
+L:	linux-fsdevel@vger.kernel.org
+S:	Supported
+F:	Documentation/filesystems/caching/
+F:	Documentation/filesystems/netfs_library.rst
+F:	fs/netfs/
+F:	include/linux/fscache*.h
+F:	include/linux/netfs.h
+F:	include/trace/events/fscache.h
+F:	include/trace/events/netfs.h
+
+FILESYSTEMS [STACKABLE]
+M:	Miklos Szeredi <miklos@szeredi.hu>
+M:	Amir Goldstein <amir73il@gmail.com>
+L:	linux-fsdevel@vger.kernel.org
+L:	linux-unionfs@vger.kernel.org
+S:	Maintained
+F:	fs/backing-file.c
+F:	include/linux/backing-file.h
+
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
 M:	Riku Voipio <riku.voipio@iki.fi>
 L:	linux-hwmon@vger.kernel.org
@@ -8218,11 +8336,14 @@ L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/input/joystick/fsia6b.c
 
-FOCUSRITE SCARLETT GEN 2/3 MIXER DRIVER
+FOCUSRITE SCARLETT2 MIXER DRIVER (Scarlett Gen 2+ and Clarett)
 M:	Geoffrey D. Bennett <g@b4.vu>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
+W:	https://github.com/geoffreybennett/scarlett-gen2
+B:	https://github.com/geoffreybennett/scarlett-gen2/issues
+T:	git https://github.com/geoffreybennett/scarlett-gen2.git
+F:	include/uapi/sound/scarlett2.h
 F:	sound/usb/mixer_scarlett2.c
 
 FORCEDETH GIGABIT ETHERNET DRIVER
@@ -8375,7 +8496,7 @@ FREESCALE IMX / MXC FEC DRIVER
 M:	Wei Fang <wei.fang@nxp.com>
 R:	Shenwei Wang <shenwei.wang@nxp.com>
 R:	Clark Wang <xiaoning.wang@nxp.com>
-R:	NXP Linux Team <linux-imx@nxp.com>
+L:	imx@lists.linux.dev
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -8410,7 +8531,7 @@ F:	drivers/i2c/busses/i2c-imx.c
 FREESCALE IMX LPI2C DRIVER
 M:	Dong Aisheng <aisheng.dong@nxp.com>
 L:	linux-i2c@vger.kernel.org
-L:	linux-imx@nxp.com
+L:	imx@lists.linux.dev
 S:	Maintained
 F:	Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
 F:	drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -8527,7 +8648,6 @@ L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	sound/soc/fsl/fsl*
 F:	sound/soc/fsl/imx*
-F:	sound/soc/fsl/mpc8610_hpcd.c
 
 FREESCALE SOC SOUND QMC DRIVER
 M:	Herve Codina <herve.codina@bootlin.com>
@@ -8566,14 +8686,6 @@ F:	Documentation/power/freezing-of-tasks.rst
 F:	include/linux/freezer.h
 F:	kernel/freezer.c
 
-FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
-M:	David Howells <dhowells@redhat.com>
-L:	linux-cachefs@redhat.com (moderated for non-subscribers)
-S:	Supported
-F:	Documentation/filesystems/caching/
-F:	fs/fscache/
-F:	include/linux/fscache*.h
-
 FSCRYPT: FILE SYSTEM LEVEL ENCRYPTION SUPPORT
 M:	Eric Biggers <ebiggers@kernel.org>
 M:	Theodore Y. Ts'o <tytso@mit.edu>
@@ -8706,6 +8818,21 @@ F:	kernel/futex/*
 F:	tools/perf/bench/futex*
 F:	tools/testing/selftests/futex/
 
+GALAXYCORE GC0308 CAMERA SENSOR DRIVER
+M:	Sebastian Reichel <sre@kernel.org>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml
+F:	drivers/media/i2c/gc0308.c
+
+GALAXYCORE GC2145 SENSOR DRIVER
+M:	Alain Volmat <alain.volmat@foss.st.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
+F:	drivers/media/i2c/gc2145.c
+
 GATEWORKS SYSTEM CONTROLLER (GSC) DRIVER
 M:	Tim Harvey <tharvey@gateworks.com>
 S:	Maintained
@@ -8824,21 +8951,13 @@ F:	Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
 F:	drivers/i2c/muxes/i2c-demux-pinctrl.c
 
 GENERIC PM DOMAINS
-M:	"Rafael J. Wysocki" <rafael@kernel.org>
-M:	Kevin Hilman <khilman@kernel.org>
 M:	Ulf Hansson <ulf.hansson@linaro.org>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/power/power?domain*
-F:	drivers/base/power/domain*.c
-F:	include/linux/pm_domain.h
-
-GENERIC PM DOMAIN PROVIDERS
-M:	Ulf Hansson <ulf.hansson@linaro.org>
-L:	linux-pm@vger.kernel.org
-S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm.git
 F:	drivers/pmdomain/
+F:	include/linux/pm_domain.h
 
 GENERIC RADIX TREE
 M:	Kent Overstreet <kent.overstreet@linux.dev>
@@ -8905,6 +9024,13 @@ F:	Documentation/filesystems/gfs2*
 F:	fs/gfs2/
 F:	include/uapi/linux/gfs2_ondisk.h
 
+GIGABYTE WATERFORCE SENSOR DRIVER
+M:	Aleksa Savic <savicaleksa83@gmail.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/gigabyte_waterforce.rst
+F:	drivers/hwmon/gigabyte_waterforce.c
+
 GIGABYTE WMI DRIVER
 M:	Thomas Weißschuh <thomas@weissschuh.net>
 L:	platform-driver-x86@vger.kernel.org
@@ -8951,6 +9077,16 @@ S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux.git
 F:	drivers/firmware/google/
 
+GOOGLE TENSOR SoC SUPPORT
+M:	Peter Griffin <peter.griffin@linaro.org>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-samsung-soc@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
+F:	arch/arm64/boot/dts/exynos/google/
+F:	drivers/clk/samsung/clk-gs101.c
+F:	include/dt-bindings/clock/google,gs101.h
+
 GPD POCKET FAN DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -8990,7 +9126,7 @@ F:	drivers/gpio/gpio-mockup.c
 F:	tools/testing/selftests/gpio/
 
 GPIO REGMAP
-M:	Michael Walle <michael@walle.cc>
+M:	Michael Walle <mwalle@kernel.org>
 S:	Maintained
 F:	drivers/gpio/gpio-regmap.c
 F:	include/linux/gpio/regmap.h
@@ -9262,7 +9398,6 @@ F:	drivers/char/hw_random/
 F:	include/linux/hw_random.h
 
 HARDWARE SPINLOCK CORE
-M:	Ohad Ben-Cohen <ohad@wizery.com>
 M:	Bjorn Andersson <andersson@kernel.org>
 R:	Baolin Wang <baolin.wang7@gmail.com>
 L:	linux-remoteproc@vger.kernel.org
@@ -9491,6 +9626,7 @@ F:	Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
 F:	drivers/gpio/gpio-hisi.c
 
 HISILICON HIGH PERFORMANCE RSA ENGINE DRIVER (HPRE)
+M:	Zhiqi Song <songzhiqi1@huawei.com>
 M:	Longfang Liu <liulongfang@huawei.com>
 L:	linux-crypto@vger.kernel.org
 S:	Maintained
@@ -9593,7 +9729,6 @@ F:	Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
 F:	drivers/scsi/hisi_sas/
 
 HISILICON SECURITY ENGINE V2 DRIVER (SEC2)
-M:	Kai Ye <yekai13@huawei.com>
 M:	Longfang Liu <liulongfang@huawei.com>
 L:	linux-crypto@vger.kernel.org
 S:	Maintained
@@ -9653,6 +9788,13 @@ F:	lib/test_hmm*
 F:	mm/hmm*
 F:	tools/testing/selftests/mm/*hmm*
 
+HONEYWELL HSC030PA PRESSURE SENSOR SERIES IIO DRIVER
+M:	Petre Rodan <petre.rodan@subdimension.ro>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
+F:	drivers/iio/pressure/hsc030pa*
+
 HONEYWELL MPRLS0025PA PRESSURE SENSOR SERIES IIO DRIVER
 M:	Andreas Klinger <ak@it-klinger.de>
 L:	linux-iio@vger.kernel.org
@@ -9660,11 +9802,6 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
 F:	drivers/iio/pressure/mprls0025pa.c
 
-HOST AP DRIVER
-L:	linux-wireless@vger.kernel.org
-S:	Obsolete
-F:	drivers/net/wireless/intersil/hostap/
-
 HP BIOSCFG DRIVER
 M:	Jorge Lopez <jorge.lopez2@hp.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -9938,7 +10075,7 @@ F:	Documentation/i2c/busses/i2c-parport.rst
 F:	drivers/i2c/busses/i2c-parport.c
 
 I2C SUBSYSTEM
-M:	Wolfram Sang <wsa@kernel.org>
+M:	Wolfram Sang <wsa+renesas@sang-engineering.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 W:	https://i2c.wiki.kernel.org/
@@ -9960,7 +10097,7 @@ L:	linux-i2c@vger.kernel.org
 S:	Maintained
 W:	https://i2c.wiki.kernel.org/
 Q:	https://patchwork.ozlabs.org/project/linux-i2c/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git
 F:	Documentation/devicetree/bindings/i2c/
 F:	drivers/i2c/algos/
 F:	drivers/i2c/busses/
@@ -10116,7 +10253,6 @@ IBM Power SRIOV Virtual NIC Device Driver
 M:	Haren Myneni <haren@linux.ibm.com>
 M:	Rick Lindsley <ricklind@linux.ibm.com>
 R:	Nick Child <nnac123@linux.ibm.com>
-R:	Dany Madden <danymadden@us.ibm.com>
 R:	Thomas Falcon <tlfalcon@linux.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -10153,7 +10289,7 @@ F:	drivers/scsi/ibmvscsi/ibmvscsi*
 F:	include/scsi/viosrp.h
 
 IBM Power Virtual SCSI Device Target Driver
-M:	Michael Cyr <mikecyr@linux.ibm.com>
+M:	Tyrel Datwyler <tyreld@linux.ibm.com>
 L:	linux-scsi@vger.kernel.org
 L:	target-devel@vger.kernel.org
 S:	Supported
@@ -10202,16 +10338,6 @@ S:	Maintained
 W:	https://github.com/o2genum/ideapad-slidebar
 F:	drivers/input/misc/ideapad_slidebar.c
 
-IDMAPPED MOUNTS
-M:	Christian Brauner <brauner@kernel.org>
-M:	Seth Forshee <sforshee@kernel.org>
-L:	linux-fsdevel@vger.kernel.org
-S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping.git
-F:	Documentation/filesystems/idmappings.rst
-F:	include/linux/mnt_idmapping.*
-F:	tools/testing/selftests/mount_setattr/
-
 IDT VersaClock 5 CLOCK DRIVER
 M:	Luca Ceresoli <luca@lucaceresoli.net>
 S:	Maintained
@@ -10283,8 +10409,8 @@ IIO LIGHT SENSOR GAIN-TIME-SCALE HELPERS
 M:	Matti Vaittinen <mazziesaccount@gmail.com>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
-F:	drivers/iio/light/gain-time-scale-helper.c
-F:	drivers/iio/light/gain-time-scale-helper.h
+F:	drivers/iio/industrialio-gts-helper.c
+F:	include/linux/iio/iio-gts-helper.h
 
 IIO MULTIPLEXER
 M:	Peter Rosin <peda@axentia.se>
@@ -10345,6 +10471,17 @@ IMGTEC IR DECODER DRIVER
 S:	Orphan
 F:	drivers/media/rc/img-ir/
 
+IMGTEC POWERVR DRM DRIVER
+M:	Frank Binns <frank.binns@imgtec.com>
+M:	Donald Robson <donald.robson@imgtec.com>
+M:	Matt Coster <matt.coster@imgtec.com>
+S:	Supported
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/gpu/img,powervr.yaml
+F:	Documentation/gpu/imagination/
+F:	drivers/gpu/drm/imagination/
+F:	include/uapi/drm/pvr_drm.h
+
 IMON SOUNDGRAPH USB IR RECEIVER
 M:	Sean Young <sean@mess.org>
 L:	linux-media@vger.kernel.org
@@ -10504,7 +10641,9 @@ F:	drivers/crypto/inside-secure/
 
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
 M:	Mimi Zohar <zohar@linux.ibm.com>
+M:	Roberto Sassu <roberto.sassu@huawei.com>
 M:	Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
+R:	Eric Snowberg <eric.snowberg@oracle.com>
 L:	linux-integrity@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity.git
@@ -10582,16 +10721,26 @@ L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	arch/x86/include/asm/intel-family.h
 
-INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
+INTEL DRM DISPLAY FOR XE AND I915 DRIVERS
+M:	Jani Nikula <jani.nikula@linux.intel.com>
+M:	Rodrigo Vivi <rodrigo.vivi@intel.com>
+L:	intel-gfx@lists.freedesktop.org
+L:	intel-xe@lists.freedesktop.org
+S:	Supported
+F:	drivers/gpu/drm/i915/display/
+F:	drivers/gpu/drm/xe/display/
+F:	drivers/gpu/drm/xe/compat-i915-headers
+
+INTEL DRM I915 DRIVER (Meteor Lake, DG2 and older excluding Poulsbo, Moorestown and derivative)
 M:	Jani Nikula <jani.nikula@linux.intel.com>
 M:	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
 M:	Rodrigo Vivi <rodrigo.vivi@intel.com>
-M:	Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
+M:	Tvrtko Ursulin <tursulin@ursulin.net>
 L:	intel-gfx@lists.freedesktop.org
 S:	Supported
-W:	https://01.org/linuxgraphics/
+W:	https://drm.pages.freedesktop.org/intel-docs/
 Q:	http://patchwork.freedesktop.org/project/intel-gfx/
-B:	https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs
+B:	https://drm.pages.freedesktop.org/intel-docs/how-to-file-i915-bugs.html
 C:	irc://irc.oftc.net/intel-gfx
 T:	git git://anongit.freedesktop.org/drm-intel
 F:	Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -10601,6 +10750,23 @@ F:	drivers/gpu/drm/i915/
 F:	include/drm/i915*
 F:	include/uapi/drm/i915_drm.h
 
+INTEL DRM XE DRIVER (Lunar Lake and newer)
+M:	Lucas De Marchi <lucas.demarchi@intel.com>
+M:	Oded Gabbay <ogabbay@kernel.org>
+M:	Thomas Hellström <thomas.hellstrom@linux.intel.com>
+L:	intel-xe@lists.freedesktop.org
+S:	Supported
+W:	https://drm.pages.freedesktop.org/intel-docs/
+Q:	http://patchwork.freedesktop.org/project/intel-xe/
+B:	https://gitlab.freedesktop.org/drm/xe/kernel/-/issues
+C:	irc://irc.oftc.net/xe
+T:	git https://gitlab.freedesktop.org/drm/xe/kernel.git
+F:	Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
+F:	Documentation/gpu/xe/
+F:	drivers/gpu/drm/xe/
+F:	include/drm/xe*
+F:	include/uapi/drm/xe_drm.h
+
 INTEL ETHERNET DRIVERS
 M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
 M:	Tony Nguyen <anthony.l.nguyen@intel.com>
@@ -10624,13 +10790,6 @@ S:	Supported
 F:	drivers/infiniband/hw/irdma/
 F:	include/uapi/rdma/irdma-abi.h
 
-INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-M:	Maik Broemme <mbroemme@libmpq.org>
-L:	linux-fbdev@vger.kernel.org
-S:	Maintained
-F:	Documentation/fb/intelfb.rst
-F:	drivers/video/fbdev/intelfb/
-
 INTEL GPIO DRIVERS
 M:	Andy Shevchenko <andy@kernel.org>
 L:	linux-gpio@vger.kernel.org
@@ -10648,11 +10807,11 @@ F:	drivers/gpio/gpio-tangier.h
 
 INTEL GVT-g DRIVERS (Intel GPU Virtualization)
 M:	Zhenyu Wang <zhenyuw@linux.intel.com>
-M:	Zhi Wang <zhi.a.wang@intel.com>
+M:	Zhi Wang <zhi.wang.linux@gmail.com>
 L:	intel-gvt-dev@lists.freedesktop.org
 L:	intel-gfx@lists.freedesktop.org
 S:	Supported
-W:	https://01.org/igvt-g
+W:	https://github.com/intel/gvt-linux/wiki
 T:	git https://github.com/intel/gvt-linux.git
 F:	drivers/gpu/drm/i915/gvt/
 
@@ -10670,6 +10829,13 @@ S:	Supported
 Q:	https://patchwork.kernel.org/project/linux-dmaengine/list/
 F:	drivers/dma/ioat*
 
+INTEL IAA CRYPTO DRIVER
+M:	Tom Zanussi <tom.zanussi@linux.intel.com>
+L:	linux-crypto@vger.kernel.org
+S:	Supported
+F:	Documentation/driver-api/crypto/iaa/iaa-crypto.rst
+F:	drivers/crypto/intel/iaa/*
+
 INTEL IDLE DRIVER
 M:	Jacob Pan <jacob.jun.pan@linux.intel.com>
 M:	Len Brown <lenb@kernel.org>
@@ -10967,7 +11133,7 @@ S:	Supported
 F:	drivers/net/wireless/intel/iwlegacy/
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
-M:	Gregory Greenman <gregory.greenman@intel.com>
+M:	Miri Korenblit <miriam.rachel.korenblit@intel.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 W:	https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi
@@ -11107,6 +11273,7 @@ L:	io-uring@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.dk/linux-block
 T:	git git://git.kernel.dk/liburing
+F:	include/linux/io_uring/
 F:	include/linux/io_uring.h
 F:	include/linux/io_uring_types.h
 F:	include/trace/events/io_uring.h
@@ -11202,7 +11369,7 @@ F:	drivers/media/radio/radio-isa*
 ISAPNP
 M:	Jaroslav Kysela <perex@perex.cz>
 S:	Maintained
-F:	Documentation/driver-api/isapnp.rst
+F:	Documentation/userspace-api/isapnp.rst
 F:	drivers/pnp/isapnp/
 F:	include/linux/isapnp.h
 
@@ -11563,6 +11730,7 @@ F:	fs/smb/server/
 KERNEL UNIT TESTING FRAMEWORK (KUnit)
 M:	Brendan Higgins <brendanhiggins@google.com>
 M:	David Gow <davidgow@google.com>
+R:	Rae Moar <rmoar@google.com>
 L:	linux-kselftest@vger.kernel.org
 L:	kunit-dev@googlegroups.com
 S:	Maintained
@@ -11975,6 +12143,14 @@ S:	Maintained
 F:	arch/mips/lantiq
 F:	drivers/soc/lantiq
 
+LANTIQ PEF2256 DRIVER
+M:	Herve Codina <herve.codina@bootlin.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/lantiq,pef2256.yaml
+F:	drivers/net/wan/framer/pef2256/
+F:	drivers/pinctrl/pinctrl-pef2256.c
+F:	include/linux/framer/pef2256.h
+
 LASI 53c700 driver for PARISC
 M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
@@ -12102,9 +12278,10 @@ F:	drivers/ata/sata_promise.*
 
 LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)
 M:	Damien Le Moal <dlemoal@kernel.org>
+M:	Niklas Cassel <cassel@kernel.org>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux.git
 F:	Documentation/ABI/testing/sysfs-ata
 F:	Documentation/devicetree/bindings/ata/
 F:	drivers/ata/
@@ -12242,21 +12419,21 @@ S:	Orphan
 F:	arch/powerpc/platforms/40x/
 F:	arch/powerpc/platforms/44x/
 
-LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
+LINUX FOR POWERPC EMBEDDED PPC85XX
 M:	Scott Wood <oss@buserror.net>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Odd fixes
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git
 F:	Documentation/devicetree/bindings/cache/freescale-l2cache.txt
 F:	Documentation/devicetree/bindings/powerpc/fsl/
-F:	arch/powerpc/platforms/83xx/
 F:	arch/powerpc/platforms/85xx/
 
-LINUX FOR POWERPC EMBEDDED PPC8XX
+LINUX FOR POWERPC EMBEDDED PPC8XX AND PPC83XX
 M:	Christophe Leroy <christophe.leroy@csgroup.eu>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	arch/powerpc/platforms/8xx/
+F:	arch/powerpc/platforms/83xx/
 
 LINUX KERNEL DUMP TEST MODULE (LKDTM)
 M:	Kees Cook <keescook@chromium.org>
@@ -12403,6 +12580,12 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/har
 F:	Documentation/admin-guide/LSM/LoadPin.rst
 F:	security/loadpin/
 
+LOCKDOWN SECURITY MODULE
+L:	linux-security-module@vger.kernel.org
+S:	Odd Fixes
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm.git
+F:	security/lockdown/
+
 LOCKING PRIMITIVES
 M:	Peter Zijlstra <peterz@infradead.org>
 M:	Ingo Molnar <mingo@redhat.com>
@@ -12414,7 +12597,7 @@ S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git locking/core
 F:	Documentation/locking/
 F:	arch/*/include/asm/spinlock*.h
-F:	include/linux/lockdep.h
+F:	include/linux/lockdep*.h
 F:	include/linux/mutex*.h
 F:	include/linux/rwlock*.h
 F:	include/linux/rwsem*.h
@@ -12463,6 +12646,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
 F:	drivers/gpio/gpio-loongson-64bit.c
 
+LOONGSON LS2X APB DMA DRIVER
+M:	Binbin Zhou <zhoubinbin@loongson.cn>
+L:	dmaengine@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml
+F:	drivers/dma/ls2x-apb-dma.c
+
 LOONGSON LS2X I2C DRIVER
 M:	Binbin Zhou <zhoubinbin@loongson.cn>
 L:	linux-i2c@vger.kernel.org
@@ -12585,6 +12775,16 @@ S:	Maintained
 F:	Documentation/hwmon/ltc4261.rst
 F:	drivers/hwmon/ltc4261.c
 
+LTC4286 HARDWARE MONITOR DRIVER
+M:	Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
+F:	Documentation/hwmon/ltc4286.rst
+F:	drivers/hwmon/pmbus/Kconfig
+F:	drivers/hwmon/pmbus/Makefile
+F:	drivers/hwmon/pmbus/ltc4286.c
+
 LTC4306 I2C MULTIPLEXER DRIVER
 M:	Michael Hennerich <michael.hennerich@analog.com>
 L:	linux-i2c@vger.kernel.org
@@ -12594,17 +12794,23 @@ F:	Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
 F:	drivers/i2c/muxes/i2c-mux-ltc4306.c
 
 LTP (Linux Test Project)
-M:	Mike Frysinger <vapier@gentoo.org>
 M:	Cyril Hrubis <chrubis@suse.cz>
-M:	Wanlong Gao <wanlong.gao@gmail.com>
 M:	Jan Stancek <jstancek@redhat.com>
-M:	Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
-M:	Alexey Kodanev <alexey.kodanev@oracle.com>
+M:	Petr Vorel <pvorel@suse.cz>
+M:	Li Wang <liwang@redhat.com>
+M:	Yang Xu <xuyang2018.jy@fujitsu.com>
 L:	ltp@lists.linux.it (subscribers-only)
 S:	Maintained
 W:	http://linux-test-project.github.io/
 T:	git https://github.com/linux-test-project/ltp.git
 
+LTR390 AMBIENT/UV LIGHT SENSOR DRIVER
+M:	Anshul Dalal <anshulusr@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/light/liteon,ltr390.yaml
+F:	drivers/iio/light/ltr390.c
+
 LYNX 28G SERDES PHY DRIVER
 M:	Ioana Ciornei <ioana.ciornei@nxp.com>
 L:	netdev@vger.kernel.org
@@ -12699,10 +12905,12 @@ F:	drivers/mailbox/arm_mhuv2.c
 F:	include/linux/mailbox/arm_mhuv2_message.h
 
 MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
-M:	Michael Kerrisk <mtk.manpages@gmail.com>
+M:	Alejandro Colomar <alx@kernel.org>
 L:	linux-man@vger.kernel.org
 S:	Maintained
 W:	http://www.kernel.org/doc/man-pages
+T:	git git://git.kernel.org/pub/scm/docs/man-pages/man-pages.git
+T:	git git://www.alejandro-colomar.es/src/alx/linux/man-pages/man-pages.git
 
 MANAGEMENT COMPONENT TRANSPORT PROTOCOL (MCTP)
 M:	Jeremy Kerr <jk@codeconstruct.com.au>
@@ -12739,7 +12947,8 @@ MARVELL 88E6XXX ETHERNET SWITCH FABRIC DRIVER
 M:	Andrew Lunn <andrew@lunn.ch>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/net/dsa/marvell.txt
+F:	Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml
+F:	Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml
 F:	Documentation/networking/devlink/mv88e6xxx.rst
 F:	drivers/net/dsa/mv88e6xxx/
 F:	include/linux/dsa/mv88e6xxx.h
@@ -12816,10 +13025,10 @@ S:	Maintained
 F:	drivers/thermal/armada_thermal.c
 
 MARVELL MVNETA ETHERNET DRIVER
-M:	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+M:	Marcin Wojtas <marcin.s.wojtas@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ethernet/marvell/mvneta.*
+F:	drivers/net/ethernet/marvell/mvneta*
 
 MARVELL MVPP2 ETHERNET DRIVER
 M:	Marcin Wojtas <marcin.s.wojtas@gmail.com>
@@ -12939,6 +13148,14 @@ F:	Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
 F:	Documentation/hwmon/max31827.rst
 F:	drivers/hwmon/max31827.c
 
+MAX31335 RTC DRIVER
+M:	Antoniu Miclaus <antoniu.miclaus@analog.com>
+L:	linux-rtc@vger.kernel.org
+S:	Supported
+W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/devicetree/bindings/rtc/adi,max31335.yaml
+F:	drivers/rtc/rtc-max31335.c
+
 MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
 L:	linux-hwmon@vger.kernel.org
 S:	Orphan
@@ -12968,6 +13185,7 @@ MAX96712 QUAD GMSL2 DESERIALIZER DRIVER
 M:	Niklas Söderlund <niklas.soderlund@ragnatech.se>
 L:	linux-media@vger.kernel.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
 F:	drivers/staging/media/max96712/max96712.c
 
 MAX9860 MONO AUDIO VOICE CODEC DRIVER
@@ -13147,6 +13365,13 @@ F:	Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531
 F:	drivers/iio/potentiometer/mcp4018.c
 F:	drivers/iio/potentiometer/mcp4531.c
 
+MCP4821 DAC DRIVER
+M:	Anshul Dalal <anshulusr@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml
+F:	drivers/iio/dac/mcp4821.c
+
 MCR20A IEEE-802.15.4 RADIO DRIVER
 M:	Stefan Schmidt <stefan@datenfreihafen.org>
 L:	linux-wpan@vger.kernel.org
@@ -13388,13 +13613,16 @@ W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/dvb-frontends/stv6111*
 
-MEDIA DRIVERS FOR STM32 - DCMI
+MEDIA DRIVERS FOR STM32 - DCMI / DCMIPP
 M:	Hugues Fruchet <hugues.fruchet@foss.st.com>
+M:	Alain Volmat <alain.volmat@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
+F:	Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
 F:	drivers/media/platform/st/stm32/stm32-dcmi.c
+F:	drivers/media/platform/st/stm32/stm32-dcmipp/*
 
 MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
@@ -13450,7 +13678,6 @@ F:	drivers/dma/mediatek/
 
 MEDIATEK ETHERNET DRIVER
 M:	Felix Fietkau <nbd@nbd.name>
-M:	John Crispin <john@phrozen.org>
 M:	Sean Wang <sean.wang@mediatek.com>
 M:	Mark Lee <Mark-MC.Lee@mediatek.com>
 M:	Lorenzo Bianconi <lorenzo@kernel.org>
@@ -13606,7 +13833,6 @@ F:	include/soc/mediatek/smi.h
 MEDIATEK SWITCH DRIVER
 M:	Arınç ÜNAL <arinc.unal@arinc9.com>
 M:	Daniel Golle <daniel@makrotopia.org>
-M:	Landen Chao <Landen.Chao@mediatek.com>
 M:	DENG Qingfang <dqfext@gmail.com>
 M:	Sean Wang <sean.wang@mediatek.com>
 L:	netdev@vger.kernel.org
@@ -13671,6 +13897,13 @@ S:	Supported
 W:	http://www.melexis.com
 F:	drivers/iio/temperature/mlx90632.c
 
+MELEXIS MLX90635 DRIVER
+M:	Crt Mori <cmo@melexis.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+W:	http://www.melexis.com
+F:	drivers/iio/temperature/mlx90635.c
+
 MELFAS MIP4 TOUCHSCREEN DRIVER
 M:	Sangwon Jee <jeesw@melfas.com>
 S:	Supported
@@ -13879,6 +14112,17 @@ F:	mm/
 F:	tools/mm/
 F:	tools/testing/selftests/mm/
 
+MEMORY MAPPING
+M:	Andrew Morton <akpm@linux-foundation.org>
+R:	Liam R. Howlett <Liam.Howlett@oracle.com>
+R:	Vlastimil Babka <vbabka@suse.cz>
+R:	Lorenzo Stoakes <lstoakes@gmail.com>
+L:	linux-mm@kvack.org
+S:	Maintained
+W:	http://www.linux-mm.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
+F:	mm/mmap.c
+
 MEMORY TECHNOLOGY DEVICES (MTD)
 M:	Miquel Raynal <miquel.raynal@bootlin.com>
 M:	Richard Weinberger <richard@nod.at>
@@ -14137,15 +14381,16 @@ MICROCHIP MCP16502 PMIC DRIVER
 M:	Claudiu Beznea <claudiu.beznea@tuxon.dev>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
-F:	Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
+F:	Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml
 F:	drivers/regulator/mcp16502.c
 
 MICROCHIP MCP3564 ADC DRIVER
-M:      Marius Cristea <marius.cristea@microchip.com>
-L:      linux-iio@vger.kernel.org
-S:      Supported
-F:      Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml
-F:      drivers/iio/adc/mcp3564.c
+M:	Marius Cristea <marius.cristea@microchip.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+F:	Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564
+F:	Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml
+F:	drivers/iio/adc/mcp3564.c
 
 MICROCHIP MCP3911 ADC DRIVER
 M:	Marcus Folkesson <marcus.folkesson@gmail.com>
@@ -14605,6 +14850,13 @@ S:	Maintained
 F:	Documentation/driver-api/tty/moxa-smartio.rst
 F:	drivers/tty/mxser.*
 
+MP3309C BACKLIGHT DRIVER
+M:	Flavio Suligoi <f.suligoi@asem.it>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
+F:	drivers/video/backlight/mp3309c.c
+
 MR800 AVERMEDIA USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -14941,9 +15193,11 @@ Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 F:	Documentation/devicetree/bindings/net/
+F:	Documentation/networking/net_cachelines/net_device.rst
 F:	drivers/connector/
 F:	drivers/net/
 F:	include/dt-bindings/net/
+F:	include/linux/cn_proc.h
 F:	include/linux/etherdevice.h
 F:	include/linux/fcdevice.h
 F:	include/linux/fddidevice.h
@@ -14951,6 +15205,7 @@ F:	include/linux/hippidevice.h
 F:	include/linux/if_*
 F:	include/linux/inetdevice.h
 F:	include/linux/netdevice.h
+F:	include/uapi/linux/cn_proc.h
 F:	include/uapi/linux/if_*
 F:	include/uapi/linux/netdevice.h
 X:	drivers/net/wireless/
@@ -14996,8 +15251,11 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 F:	Documentation/core-api/netlink.rst
 F:	Documentation/netlink/
 F:	Documentation/networking/
+F:	Documentation/networking/net_cachelines/
 F:	Documentation/process/maintainer-netdev.rst
 F:	Documentation/userspace-api/netlink/
+F:	include/linux/framer/framer-provider.h
+F:	include/linux/framer/framer.h
 F:	include/linux/in.h
 F:	include/linux/indirect_call_wrapper.h
 F:	include/linux/net.h
@@ -15085,7 +15343,7 @@ K:	\bmdo_
 NETWORKING [MPTCP]
 M:	Matthieu Baerts <matttbe@kernel.org>
 M:	Mat Martineau <martineau@kernel.org>
-R:	Geliang Tang <geliang.tang@linux.dev>
+R:	Geliang Tang <geliang@kernel.org>
 L:	netdev@vger.kernel.org
 L:	mptcp@lists.linux.dev
 S:	Maintained
@@ -15093,7 +15351,7 @@ W:	https://github.com/multipath-tcp/mptcp_net-next/wiki
 B:	https://github.com/multipath-tcp/mptcp_net-next/issues
 T:	git https://github.com/multipath-tcp/mptcp_net-next.git export-net
 T:	git https://github.com/multipath-tcp/mptcp_net-next.git export
-F:	Documentation/netlink/specs/mptcp.yaml
+F:	Documentation/netlink/specs/mptcp_pm.yaml
 F:	Documentation/networking/mptcp-sysctl.rst
 F:	include/net/mptcp.h
 F:	include/trace/events/mptcp.h
@@ -15106,6 +15364,7 @@ NETWORKING [TCP]
 M:	Eric Dumazet <edumazet@google.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
+F:	Documentation/networking/net_cachelines/tcp_sock.rst
 F:	include/linux/tcp.h
 F:	include/net/tcp.h
 F:	include/trace/events/tcp.h
@@ -15237,6 +15496,15 @@ F:	include/linux/nitro_enclaves.h
 F:	include/uapi/linux/nitro_enclaves.h
 F:	samples/nitro_enclaves/
 
+NITRO SECURE MODULE (NSM)
+M:	Alexander Graf <graf@amazon.com>
+L:	linux-kernel@vger.kernel.org
+L:	The AWS Nitro Enclaves Team <aws-nitro-enclaves-devel@amazon.com>
+S:	Supported
+W:	https://aws.amazon.com/ec2/nitro/nitro-enclaves/
+F:	drivers/misc/nsm.c
+F:	include/uapi/linux/nsm.h
+
 NOHZ, DYNTICKS SUPPORT
 M:	Frederic Weisbecker <frederic@kernel.org>
 M:	Thomas Gleixner <tglx@linutronix.de>
@@ -15436,7 +15704,7 @@ NXP C45 TJA11XX PHY DRIVER
 M:	Andrei Botila <andrei.botila@oss.nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/phy/nxp-c45-tja11xx.c
+F:	drivers/net/phy/nxp-c45-tja11xx*
 
 NXP FSPI DRIVER
 M:	Han Xu <han.xu@nxp.com>
@@ -15460,7 +15728,7 @@ F:	drivers/iio/gyro/fxas21002c_spi.c
 NXP i.MX 7D/6SX/6UL/93 AND VF610 ADC DRIVER
 M:	Haibo Chen <haibo.chen@nxp.com>
 L:	linux-iio@vger.kernel.org
-L:	linux-imx@nxp.com
+L:	imx@lists.linux.dev
 S:	Maintained
 F:	Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml
 F:	Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
@@ -15497,7 +15765,7 @@ F:	drivers/gpu/drm/imx/dcss/
 NXP i.MX 8QXP ADC DRIVER
 M:	Cai Huoqing <cai.huoqing@linux.dev>
 M:	Haibo Chen <haibo.chen@nxp.com>
-L:	linux-imx@nxp.com
+L:	imx@lists.linux.dev
 L:	linux-iio@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml
@@ -15505,7 +15773,7 @@ F:	drivers/iio/adc/imx8qxp-adc.c
 
 NXP i.MX 8QXP/8QM JPEG V4L2 DRIVER
 M:	Mirela Rabulea <mirela.rabulea@nxp.com>
-R:	NXP Linux Team <linux-imx@nxp.com>
+L:	imx@lists.linux.dev
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
@@ -15515,7 +15783,7 @@ NXP i.MX CLOCK DRIVERS
 M:	Abel Vesa <abelvesa@kernel.org>
 R:	Peng Fan <peng.fan@nxp.com>
 L:	linux-clk@vger.kernel.org
-L:	linux-imx@nxp.com
+L:	imx@lists.linux.dev
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux.git clk/imx
 F:	Documentation/devicetree/bindings/clock/imx*
@@ -15704,9 +15972,8 @@ F:	Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
 F:	drivers/gpio/gpio-omap.c
 
 OMAP HARDWARE SPINLOCK SUPPORT
-M:	Ohad Ben-Cohen <ohad@wizery.com>
 L:	linux-omap@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/hwspinlock/omap_hwspinlock.c
 
 OMAP HS MMC SUPPORT
@@ -15806,6 +16073,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
 F:	Documentation/devicetree/bindings/arm/ti/omap.yaml
 F:	arch/arm/configs/omap2plus_defconfig
 F:	arch/arm/mach-omap2/
+F:	drivers/bus/omap*.[ch]
 F:	drivers/bus/ti-sysc.c
 F:	drivers/gpio/gpio-tps65219.c
 F:	drivers/i2c/busses/i2c-omap.c
@@ -15968,6 +16236,14 @@ S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/ov5695.c
 
+OMNIVISION OV64A40 SENSOR DRIVER
+M:	Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
+F:	drivers/media/i2c/ov64a40.c
+
 OMNIVISION OV7670 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
@@ -16137,7 +16413,7 @@ F:	include/dt-bindings/
 
 OPENCOMPUTE PTP CLOCK DRIVER
 M:	Jonathan Lemon <jonathan.lemon@gmail.com>
-M:	Vadim Fedorenko <vadfed@fb.com>
+M:	Vadim Fedorenko <vadfed@linux.dev>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/ptp/ptp_ocp.c
@@ -16215,13 +16491,6 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux.git
 F:	Documentation/filesystems/orangefs.rst
 F:	fs/orangefs/
 
-ORINOCO DRIVER
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
-W:	https://wireless.wiki.kernel.org/en/users/Drivers/orinoco
-W:	http://www.nongnu.org/orinoco/
-F:	drivers/net/wireless/intersil/orinoco/
-
 OV2659 OMNIVISION SENSOR DRIVER
 M:	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -16475,6 +16744,7 @@ F:	drivers/pci/controller/dwc/*layerscape*
 PCI DRIVER FOR FU740
 M:	Paul Walmsley <paul.walmsley@sifive.com>
 M:	Greentime Hu <greentime.hu@sifive.com>
+M:	Samuel Holland <samuel.holland@sifive.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
@@ -16587,6 +16857,7 @@ F:	drivers/pci/controller/dwc/*designware*
 
 PCI DRIVER FOR TI DRA7XX/J721E
 M:	Vignesh Raghavendra <vigneshr@ti.com>
+R:	Siddharth Vadapalli <s-vadapalli@ti.com>
 L:	linux-omap@vger.kernel.org
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -16611,9 +16882,8 @@ F:	Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
 F:	drivers/pci/controller/pcie-xilinx-cpm.c
 
 PCI ENDPOINT SUBSYSTEM
-M:	Lorenzo Pieralisi <lpieralisi@kernel.org>
+M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 M:	Krzysztof Wilczyński <kw@linux.com>
-R:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 R:	Kishon Vijay Abraham I <kishon@kernel.org>
 L:	linux-pci@vger.kernel.org
 S:	Supported
@@ -16902,10 +17172,10 @@ PERFORMANCE EVENTS SUBSYSTEM
 M:	Peter Zijlstra <peterz@infradead.org>
 M:	Ingo Molnar <mingo@redhat.com>
 M:	Arnaldo Carvalho de Melo <acme@kernel.org>
+M:	Namhyung Kim <namhyung@kernel.org>
 R:	Mark Rutland <mark.rutland@arm.com>
 R:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
 R:	Jiri Olsa <jolsa@kernel.org>
-R:	Namhyung Kim <namhyung@kernel.org>
 R:	Ian Rogers <irogers@google.com>
 R:	Adrian Hunter <adrian.hunter@intel.com>
 L:	linux-perf-users@vger.kernel.org
@@ -16933,7 +17203,7 @@ R:	John Garry <john.g.garry@oracle.com>
 R:	Will Deacon <will@kernel.org>
 R:	James Clark <james.clark@arm.com>
 R:	Mike Leach <mike.leach@linaro.org>
-R:	Leo Yan <leo.yan@linaro.org>
+R:	Leo Yan <leo.yan@linux.dev>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	tools/build/feature/test-libopencsd.c
@@ -17367,7 +17637,7 @@ F:	tools/testing/selftests/proc/
 PROC SYSCTL
 M:	Luis Chamberlain <mcgrof@kernel.org>
 M:	Kees Cook <keescook@chromium.org>
-M:	Iurii Zaikin <yzaikin@google.com>
+M:	Joel Granados <j.granados@samsung.com>
 L:	linux-kernel@vger.kernel.org
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
@@ -17506,12 +17776,11 @@ F:	Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml
 F:	drivers/media/rc/pwm-ir-tx.c
 
 PWM SUBSYSTEM
-M:	Thierry Reding <thierry.reding@gmail.com>
-R:	Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+M:	Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 L:	linux-pwm@vger.kernel.org
 S:	Maintained
 Q:	https://patchwork.ozlabs.org/project/linux-pwm/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm.git
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux.git
 F:	Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
 F:	Documentation/devicetree/bindings/pwm/
 F:	Documentation/driver-api/pwm.rst
@@ -17521,7 +17790,7 @@ F:	drivers/video/backlight/pwm_bl.c
 F:	include/dt-bindings/pwm/
 F:	include/linux/pwm.h
 F:	include/linux/pwm_backlight.h
-K:	pwm_(config|apply_state|ops)
+K:	pwm_(config|apply_might_sleep|apply_atomic|ops)
 
 PXA GPIO DRIVER
 M:	Robert Jarzmik <robert.jarzmik@free.fr>
@@ -17728,33 +17997,34 @@ F:	drivers/media/tuners/qt1010*
 
 QUALCOMM ATH12K WIRELESS DRIVER
 M:	Kalle Valo <kvalo@kernel.org>
-M:	Jeff Johnson <quic_jjohnson@quicinc.com>
+M:	Jeff Johnson <jjohnson@kernel.org>
 L:	ath12k@lists.infradead.org
 S:	Supported
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath12k
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
 F:	drivers/net/wireless/ath/ath12k/
+N:	ath12k
 
 QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
 M:	Kalle Valo <kvalo@kernel.org>
-M:	Jeff Johnson <quic_jjohnson@quicinc.com>
+M:	Jeff Johnson <jjohnson@kernel.org>
 L:	ath10k@lists.infradead.org
 S:	Supported
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
-F:	Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
 F:	drivers/net/wireless/ath/ath10k/
+N:	ath10k
 
 QUALCOMM ATHEROS ATH11K WIRELESS DRIVER
 M:	Kalle Valo <kvalo@kernel.org>
-M:	Jeff Johnson <quic_jjohnson@quicinc.com>
+M:	Jeff Johnson <jjohnson@kernel.org>
 L:	ath11k@lists.infradead.org
 S:	Supported
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath11k
 B:	https://wireless.wiki.kernel.org/en/users/Drivers/ath11k/bugreport
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
-F:	Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
 F:	drivers/net/wireless/ath/ath11k/
+N:	ath11k
 
 QUALCOMM ATHEROS ATH9K WIRELESS DRIVER
 M:	Toke Høiland-Jørgensen <toke@toke.dk>
@@ -17837,7 +18107,6 @@ F:	drivers/net/ethernet/qualcomm/emac/
 
 QUALCOMM ETHQOS ETHERNET DRIVER
 M:	Vinod Koul <vkoul@kernel.org>
-R:	Bhupesh Sharma <bhupesh.sharma@linaro.org>
 L:	netdev@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
@@ -18059,6 +18328,7 @@ F:	drivers/media/cec/usb/rainshadow/
 
 RALINK MIPS ARCHITECTURE
 M:	John Crispin <john@phrozen.org>
+M:	Sergio Paracuellos <sergio.paracuellos@gmail.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/ralink
@@ -18113,11 +18383,6 @@ F:	drivers/ras/
 F:	include/linux/ras.h
 F:	include/ras/ras_event.h
 
-RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
-F:	drivers/net/wireless/legacy/ray*
-
 RC-CORE / LIRC FRAMEWORK
 M:	Sean Young <sean@mess.org>
 L:	linux-media@vger.kernel.org
@@ -18188,7 +18453,7 @@ S:	Supported
 F:	drivers/infiniband/sw/rdmavt
 
 RDS - RELIABLE DATAGRAM SOCKETS
-M:	Santosh Shilimkar <santosh.shilimkar@oracle.com>
+M:	Allison Henderson <allison.henderson@oracle.com>
 L:	netdev@vger.kernel.org
 L:	linux-rdma@vger.kernel.org
 L:	rds-devel@oss.oracle.com (moderated for non-subscribers)
@@ -18230,7 +18495,6 @@ X:	include/linux/srcu*.h
 X:	kernel/rcu/srcu*.c
 
 REAL TIME CLOCK (RTC) SUBSYSTEM
-M:	Alessandro Zummo <a.zummo@towertech.it>
 M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
 L:	linux-rtc@vger.kernel.org
 S:	Maintained
@@ -18585,6 +18849,7 @@ F:	Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml
 F:	arch/riscv/boot/dts/microchip/
 F:	drivers/char/hw_random/mpfs-rng.c
 F:	drivers/clk/microchip/clk-mpfs*.c
+F:	drivers/firmware/microchip/mpfs-auto-update.c
 F:	drivers/i2c/busses/i2c-microchip-corei2c.c
 F:	drivers/mailbox/mailbox-mpfs.c
 F:	drivers/pci/controller/pcie-microchip-host.c
@@ -18917,7 +19182,7 @@ F:	drivers/iommu/s390-iommu.c
 
 S390 IUCV NETWORK LAYER
 M:	Alexandra Winter <wintera@linux.ibm.com>
-M:	Wenjia Zhang <wenjia@linux.ibm.com>
+M:	Thorsten Winkler <twinkler@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -18936,7 +19201,7 @@ F:	arch/s390/mm
 
 S390 NETWORK DRIVERS
 M:	Alexandra Winter <wintera@linux.ibm.com>
-M:	Wenjia Zhang <wenjia@linux.ibm.com>
+M:	Thorsten Winkler <twinkler@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -19154,7 +19419,6 @@ R:	Alim Akhtar <alim.akhtar@samsung.com>
 L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk.git
 F:	Documentation/devicetree/bindings/clock/samsung,*.yaml
 F:	Documentation/devicetree/bindings/clock/samsung,s3c*
 F:	drivers/clk/samsung/
@@ -19391,7 +19655,7 @@ F:	drivers/mmc/host/sdhci-of-at91.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) NXP i.MX DRIVER
 M:	Haibo Chen <haibo.chen@nxp.com>
-L:	linux-imx@nxp.com
+L:	imx@lists.linux.dev
 L:	linux-mmc@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/sdhci-esdhc-imx.c
@@ -19442,22 +19706,29 @@ SECURITY SUBSYSTEM
 M:	Paul Moore <paul@paul-moore.com>
 M:	James Morris <jmorris@namei.org>
 M:	"Serge E. Hallyn" <serge@hallyn.com>
-L:	linux-security-module@vger.kernel.org (suggested Cc:)
+L:	linux-security-module@vger.kernel.org
 S:	Supported
-W:	http://kernsec.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm.git
+Q:	https://patchwork.kernel.org/project/linux-security-module/list
+B:	mailto:linux-security-module@vger.kernel.org
+P:	https://github.com/LinuxSecurityModule/kernel/blob/main/README.md
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm.git
+F:	include/uapi/linux/lsm.h
 F:	security/
+F:	tools/testing/selftests/lsm/
 X:	security/selinux/
+K:	\bsecurity_[a-z_0-9]\+\b
 
 SELINUX SECURITY MODULE
 M:	Paul Moore <paul@paul-moore.com>
 M:	Stephen Smalley <stephen.smalley.work@gmail.com>
-M:	Eric Paris <eparis@parisplace.org>
+R:	Ondrej Mosnacek <omosnace@redhat.com>
 L:	selinux@vger.kernel.org
 S:	Supported
-W:	https://selinuxproject.org
 W:	https://github.com/SELinuxProject
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux.git
+Q:	https://patchwork.kernel.org/project/selinux/list
+B:	mailto:selinux@vger.kernel.org
+P:	https://github.com/SELinuxProject/selinux-kernel/blob/main/README.md
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux.git
 F:	Documentation/ABI/removed/sysfs-selinux-checkreqprot
 F:	Documentation/ABI/removed/sysfs-selinux-disable
 F:	Documentation/admin-guide/LSM/SELinux.rst
@@ -19597,6 +19868,19 @@ T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/rj54n1cb0c.c
 F:	include/media/i2c/rj54n1cb0c.h
 
+SHRINKER
+M:	Andrew Morton <akpm@linux-foundation.org>
+M:	Dave Chinner <david@fromorbit.com>
+R:	Qi Zheng <zhengqi.arch@bytedance.com>
+R:	Roman Gushchin <roman.gushchin@linux.dev>
+R:	Muchun Song <muchun.song@linux.dev>
+L:	linux-mm@kvack.org
+S:	Maintained
+F:	Documentation/admin-guide/mm/shrinker_debugfs.rst
+F:	include/linux/shrinker.h
+F:	mm/shrinker.c
+F:	mm/shrinker_debug.c
+
 SH_VOU V4L2 OUTPUT DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
@@ -19706,36 +19990,15 @@ S:	Maintained
 F:	drivers/watchdog/simatic-ipc-wdt.c
 
 SIFIVE DRIVERS
-M:	Palmer Dabbelt <palmer@dabbelt.com>
 M:	Paul Walmsley <paul.walmsley@sifive.com>
+M:	Samuel Holland <samuel.holland@sifive.com>
 L:	linux-riscv@lists.infradead.org
 S:	Supported
+F:	drivers/dma/sf-pdma/
 N:	sifive
+K:	fu[57]40
 K:	[^@]sifive
 
-SIFIVE FU540 SYSTEM-ON-CHIP
-M:	Paul Walmsley <paul.walmsley@sifive.com>
-M:	Palmer Dabbelt <palmer@dabbelt.com>
-L:	linux-riscv@lists.infradead.org
-S:	Supported
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pjw/sifive.git
-N:	fu540
-K:	fu540
-
-SIFIVE PDMA DRIVER
-M:	Green Wan <green.wan@sifive.com>
-S:	Maintained
-F:	Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
-F:	drivers/dma/sf-pdma/
-
-SIFIVE SOC DRIVERS
-M:	Conor Dooley <conor@kernel.org>
-L:	linux-riscv@lists.infradead.org
-S:	Maintained
-T:	git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
-F:	Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
-F:	drivers/soc/sifive/
-
 SILEAD TOUCHSCREEN DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
 L:	linux-input@vger.kernel.org
@@ -19775,11 +20038,6 @@ F:	Documentation/devicetree/bindings/display/simple-framebuffer.yaml
 F:	drivers/video/fbdev/simplefb.c
 F:	include/linux/platform_data/simplefb.h
 
-SIMTEC EB110ATX (Chalice CATS)
-M:	Simtec Linux Team <linux@simtec.co.uk>
-S:	Supported
-W:	http://www.simtec.co.uk/products/EB110ATX/
-
 SIOX
 M:	Thorsten Scherer <t.scherer@eckelmann.de>
 M:	Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
@@ -19829,7 +20087,7 @@ W:	http://www.winischhofer.at/linuxsisusbvga.shtml
 F:	drivers/usb/misc/sisusbvga/
 
 SL28 CPLD MFD DRIVER
-M:	Michael Walle <michael@walle.cc>
+M:	Michael Walle <mwalle@kernel.org>
 S:	Maintained
 F:	Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
 F:	Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
@@ -19844,7 +20102,7 @@ F:	drivers/pwm/pwm-sl28cpld.c
 F:	drivers/watchdog/sl28cpld_wdt.c
 
 SL28 VPD NVMEM LAYOUT DRIVER
-M:	Michael Walle <michael@walle.cc>
+M:	Michael Walle <mwalle@kernel.org>
 S:	Maintained
 F:	Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml
 F:	drivers/nvmem/layouts/sl28vpd.c
@@ -19949,8 +20207,8 @@ F:	Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
 F:	drivers/net/ethernet/socionext/sni_ave.c
 
 SOCIONEXT (SNI) NETSEC NETWORK DRIVER
-M:	Jassi Brar <jaswinder.singh@linaro.org>
 M:	Ilias Apalodimas <ilias.apalodimas@linaro.org>
+M:	Masahisa Kojima <kojima.masahisa@socionext.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/socionext,synquacer-netsec.yaml
@@ -20034,6 +20292,7 @@ F:	include/linux/property.h
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
 M:	Song Liu <song@kernel.org>
+R:	Yu Kuai <yukuai3@huawei.com>
 L:	linux-raid@vger.kernel.org
 S:	Supported
 Q:	https://patchwork.kernel.org/project/linux-raid/list/
@@ -20288,11 +20547,13 @@ F:	drivers/media/dvb-frontends/sp2*
 
 SPANISH DOCUMENTATION
 M:	Carlos Bilbao <carlos.bilbao@amd.com>
+R:	Avadhut Naik <avadhut.naik@amd.com>
 S:	Maintained
 F:	Documentation/translations/sp_SP/
 
 SPARC + UltraSPARC (sparc/sparc64)
 M:	"David S. Miller" <davem@davemloft.net>
+M:	Andreas Larsson <andreas@gaisler.com>
 L:	sparclinux@vger.kernel.org
 S:	Maintained
 Q:	http://patchwork.ozlabs.org/project/sparclinux/list/
@@ -20354,7 +20615,7 @@ F:	drivers/pinctrl/spear/
 SPI NOR SUBSYSTEM
 M:	Tudor Ambarus <tudor.ambarus@linaro.org>
 M:	Pratyush Yadav <pratyush@kernel.org>
-R:	Michael Walle <michael@walle.cc>
+M:	Michael Walle <mwalle@kernel.org>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 W:	http://www.linux-mtd.infradead.org/
@@ -20566,6 +20827,15 @@ M:	Ion Badulescu <ionut@badula.org>
 S:	Odd Fixes
 F:	drivers/net/ethernet/adaptec/starfire*
 
+STARFIVE CAMERA SUBSYSTEM DRIVER
+M:	Jack Zhu <jack.zhu@starfivetech.com>
+M:	Changhuang Liang <changhuang.liang@starfivetech.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/admin-guide/media/starfive_camss.rst
+F:	Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
+F:	drivers/staging/media/starfive/camss
+
 STARFIVE CRYPTO DRIVER
 M:	Jia Jie Ho <jiajie.ho@starfivetech.com>
 M:	William Qiu <william.qiu@starfivetech.com>
@@ -21018,6 +21288,13 @@ L:	linux-mmc@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/dw_mmc*
 
+SYNOPSYS DESIGNWARE PCIE PMU DRIVER
+M:	Shuai Xue <xueshuai@linux.alibaba.com>
+M:	Jing Zhang <renyu.zj@linux.alibaba.com>
+S:	Supported
+F:	Documentation/admin-guide/perf/dwc_pcie_pmu.rst
+F:	drivers/perf/dwc_pcie_pmu.c
+
 SYNOPSYS HSDK RESET CONTROLLER DRIVER
 M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
 S:	Supported
@@ -21259,6 +21536,12 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/rc/ttusbir.c
 
+TECHWELL TW9900 VIDEO DECODER
+M:	Mehdi Djait <mehdi.djait@bootlin.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	drivers/media/i2c/tw9900.c
+
 TECHWELL TW9910 VIDEO DECODER
 L:	linux-media@vger.kernel.org
 S:	Orphan
@@ -21270,7 +21553,9 @@ M:	Jens Wiklander <jens.wiklander@linaro.org>
 R:	Sumit Garg <sumit.garg@linaro.org>
 L:	op-tee@lists.trustedfirmware.org
 S:	Maintained
-F:	Documentation/staging/tee.rst
+F:	Documentation/driver-api/tee.rst
+F:	Documentation/tee/
+F:	Documentation/userspace-api/tee.rst
 F:	drivers/tee/
 F:	include/linux/tee_drv.h
 F:	include/uapi/linux/tee.h
@@ -21565,6 +21850,17 @@ S:	Maintained
 F:	Documentation/ABI/testing/sysfs-class-firmware-attributes
 F:	drivers/platform/x86/think-lmi.?
 
+THP7312 ISP DRIVER
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+M:	Paul Elder <paul.elder@ideasonboard.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
+F:	Documentation/userspace-api/media/drivers/thp7312.rst
+F:	drivers/media/i2c/thp7312.c
+F:	include/uapi/linux/thp7312.h
+
 THUNDERBOLT DMA TRAFFIC TEST DRIVER
 M:	Isaac Hazan <isaac.hazan@intel.com>
 L:	linux-usb@vger.kernel.org
@@ -21714,6 +22010,14 @@ F:	Documentation/devicetree/bindings/media/i2c/ti,ds90*
 F:	drivers/media/i2c/ds90*
 F:	include/media/i2c/ds90*
 
+TI HDC302X HUMIDITY DRIVER
+M:	Javier Carrasco <javier.carrasco.cruz@gmail.com>
+M:	Li peiyu <579lpy@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
+F:	drivers/iio/humidity/hdc3020.c
+
 TI ICSSG ETHERNET DRIVER (ICSSG)
 R:	MD Danish Anwar <danishanwar@ti.com>
 R:	Roger Quadros <rogerq@kernel.org>
@@ -22041,7 +22345,7 @@ F:	kernel/trace/trace_osnoise.c
 F:	kernel/trace/trace_sched_wakeup.c
 
 TRADITIONAL CHINESE DOCUMENTATION
-M:	Hu Haowen <src.res.211@gmail.com>
+M:	Hu Haowen <2023002089@link.tyut.edu.cn>
 S:	Maintained
 W:	https://github.com/srcres258/linux-doc
 T:	git git://github.com/srcres258/linux-doc.git doc-zh-tw
@@ -22224,7 +22528,7 @@ F:	drivers/usb/common/ulpi.c
 F:	include/linux/ulpi/
 
 UNICODE SUBSYSTEM
-M:	Gabriel Krisman Bertazi <krisman@collabora.com>
+M:	Gabriel Krisman Bertazi <krisman@kernel.org>
 L:	linux-fsdevel@vger.kernel.org
 S:	Supported
 F:	fs/unicode/
@@ -22266,7 +22570,8 @@ S:	Maintained
 F:	drivers/ufs/host/ufs-exynos*
 
 UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER MEDIATEK HOOKS
-M:	Stanley Chu <stanley.chu@mediatek.com>
+M:	Peter Wang <peter.wang@mediatek.com>
+R:	Stanley Jhu <chu.stanley@gmail.com>
 L:	linux-scsi@vger.kernel.org
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -22568,9 +22873,8 @@ S:	Maintained
 F:	drivers/usb/typec/mux/pi3usb30532.c
 
 USB TYPEC PORT CONTROLLER DRIVERS
-M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-usb@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/usb/typec/tcpm/
 
 USB UHCI DRIVER
@@ -22597,11 +22901,6 @@ F:	drivers/usb/gadget/function/*uvc*
 F:	drivers/usb/gadget/legacy/webcam.c
 F:	include/uapi/linux/usb/g_uvc.h
 
-USB WIRELESS RNDIS DRIVER (rndis_wlan)
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
-F:	drivers/net/wireless/legacy/rndis_wlan.c
-
 USB XHCI DRIVER
 M:	Mathias Nyman <mathias.nyman@intel.com>
 L:	linux-usb@vger.kernel.org
@@ -22609,12 +22908,6 @@ S:	Supported
 F:	drivers/usb/host/pci-quirks*
 F:	drivers/usb/host/xhci*
 
-USB ZD1201 DRIVER
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
-W:	http://linux-lc100020.sourceforge.net
-F:	drivers/net/wireless/zydas/zd1201.*
-
 USER DATAGRAM PROTOCOL (UDP)
 M:	Willem de Bruijn <willemdebruijn.kernel@gmail.com>
 S:	Maintained
@@ -22720,6 +23013,7 @@ S:	Maintained
 F:	Documentation/driver-api/media/camera-sensor.rst
 F:	Documentation/driver-api/media/tx-rx.rst
 F:	drivers/media/i2c/ar*
+F:	drivers/media/i2c/gc*
 F:	drivers/media/i2c/hi*
 F:	drivers/media/i2c/imx*
 F:	drivers/media/i2c/mt*
@@ -22753,6 +23047,7 @@ M:	Alex Williamson <alex.williamson@redhat.com>
 L:	kvm@vger.kernel.org
 S:	Maintained
 T:	git https://github.com/awilliam/linux-vfio.git
+F:	Documentation/ABI/testing/debugfs-vfio
 F:	Documentation/ABI/testing/sysfs-devices-vfio-dev
 F:	Documentation/driver-api/vfio.rst
 F:	drivers/vfio/
@@ -22788,6 +23083,13 @@ L:	kvm@vger.kernel.org
 S:	Maintained
 F:	drivers/vfio/pci/mlx5/
 
+VFIO VIRTIO PCI DRIVER
+M:	Yishai Hadas <yishaih@nvidia.com>
+L:	kvm@vger.kernel.org
+L:	virtualization@lists.linux-foundation.org
+S:	Maintained
+F:	drivers/vfio/pci/virtio
+
 VFIO PCI DEVICE SPECIFIC DRIVERS
 R:	Jason Gunthorpe <jgg@nvidia.com>
 R:	Yishai Hadas <yishaih@nvidia.com>
@@ -22936,7 +23238,6 @@ M:	Amit Shah <amit@kernel.org>
 L:	virtualization@lists.linux.dev
 S:	Maintained
 F:	drivers/char/virtio_console.c
-F:	include/linux/virtio_console.h
 F:	include/uapi/linux/virtio_console.h
 
 VIRTIO CORE AND NET DRIVERS
@@ -23112,6 +23413,12 @@ S:	Maintained
 F:	drivers/input/serio/userio.c
 F:	include/uapi/linux/userio.h
 
+VISHAY VEML6075 UVA AND UVB LIGHT SENSOR DRIVER
+M:	Javier Carrasco <javier.carrasco.cruz@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml
+F:	drivers/iio/light/veml6075.c
+
 VISL VIRTUAL STATELESS DECODER DRIVER
 M:	Daniel Almeida <daniel.almeida@collabora.com>
 L:	linux-media@vger.kernel.org
@@ -23152,11 +23459,8 @@ F:	include/linux/vmalloc.h
 F:	mm/vmalloc.c
 
 VME SUBSYSTEM
-M:	Martyn Welch <martyn@welchs.me.uk>
-M:	Manohar Vanga <manohar.vanga@gmail.com>
-M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-kernel@vger.kernel.org
-S:	Odd fixes
+S:	Orphan
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
 F:	Documentation/driver-api/vme.rst
 F:	drivers/staging/vme_user/
@@ -23362,6 +23666,14 @@ F:	include/linux/watchdog.h
 F:	include/trace/events/watchdog.h
 F:	include/uapi/linux/watchdog.h
 
+WAVE5 VPU CODEC DRIVER
+M:	Nas Chung <nas.chung@chipsnmedia.com>
+M:	Jackson Lee <jackson.lee@chipsnmedia.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/cnm,wave521c.yaml
+F:	drivers/media/platform/chips-media/wave5/
+
 WHISKEYCOVE PMIC GPIO DRIVER
 M:	Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
 L:	linux-gpio@vger.kernel.org
@@ -23415,11 +23727,6 @@ M:	Miloslav Trmac <mitr@volny.cz>
 S:	Maintained
 F:	drivers/input/misc/wistron_btns.c
 
-WL3501 WIRELESS PCMCIA CARD DRIVER
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
-F:	drivers/net/wireless/legacy/wl3501*
-
 WMI BINARY MOF DRIVER
 M:	Armin Wolf <W_Armin@gmx.de>
 R:	Thomas Weißschuh <linux@weissschuh.net>
@@ -23589,15 +23896,6 @@ F:	drivers/platform/olpc/
 F:	drivers/platform/x86/
 F:	include/linux/platform_data/x86/
 
-X86 PLATFORM DRIVERS - ARCH
-R:	Darren Hart <dvhart@infradead.org>
-R:	Andy Shevchenko <andy@infradead.org>
-L:	platform-driver-x86@vger.kernel.org
-L:	x86@kernel.org
-S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
-F:	arch/x86/platform
-
 X86 PLATFORM UV HPE SUPERDOME FLEX
 M:	Steve Wahl <steve.wahl@hpe.com>
 R:	Justin Ernst <justin.ernst@hpe.com>
@@ -23809,10 +24107,10 @@ S:	Supported
 W:	http://xfs.org/
 C:	irc://irc.oftc.net/xfs
 T:	git git://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git
-P:	Documentation/filesystems/xfs-maintainer-entry-profile.rst
+P:	Documentation/filesystems/xfs/xfs-maintainer-entry-profile.rst
 F:	Documentation/ABI/testing/sysfs-fs-xfs
 F:	Documentation/admin-guide/xfs.rst
-F:	Documentation/filesystems/xfs-*
+F:	Documentation/filesystems/xfs/*
 F:	fs/xfs/
 F:	include/uapi/linux/dqblk_xfs.h
 F:	include/uapi/linux/fsmap.h
@@ -24053,13 +24351,6 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs.git
 F:	Documentation/filesystems/zonefs.rst
 F:	fs/zonefs/
 
-ZPOOL COMPRESSED PAGE STORAGE API
-M:	Dan Streetman <ddstreet@ieee.org>
-L:	linux-mm@kvack.org
-S:	Maintained
-F:	include/linux/zpool.h
-F:	mm/zpool.c
-
 ZR36067 VIDEO FOR LINUX DRIVER
 M:	Corentin Labbe <clabbe@baylibre.com>
 L:	mjpeg-users@lists.sourceforge.net
@@ -24105,11 +24396,15 @@ N:	zstd
 K:	zstd
 
 ZSWAP COMPRESSED SWAP CACHING
-M:	Seth Jennings <sjenning@redhat.com>
-M:	Dan Streetman <ddstreet@ieee.org>
-M:	Vitaly Wool <vitaly.wool@konsulko.com>
+M:	Johannes Weiner <hannes@cmpxchg.org>
+M:	Yosry Ahmed <yosryahmed@google.com>
+M:	Nhat Pham <nphamcs@gmail.com>
 L:	linux-mm@kvack.org
 S:	Maintained
+F:	Documentation/admin-guide/mm/zswap.rst
+F:	include/linux/zpool.h
+F:	include/linux/zswap.h
+F:	mm/zpool.c
 F:	mm/zswap.c
 
 THE REST
diff --git linux-libre-6.7-gnu/Makefile linux-libre-6.8-gnu/Makefile
index 2bd4051b4c94..23c5ab3b68f7 100644
--- linux-libre-6.7-gnu/Makefile
+++ linux-libre-6.8-gnu/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
-PATCHLEVEL = 7
+PATCHLEVEL = 8
 SUBLEVEL = 0
 EXTRAVERSION = -gnu
 NAME = Hurr durr I'ma ninja sloth
@@ -155,6 +155,15 @@ endif
 
 export KBUILD_EXTMOD
 
+# backward compatibility
+KBUILD_EXTRA_WARN ?= $(KBUILD_ENABLE_EXTRA_GCC_CHECKS)
+
+ifeq ("$(origin W)", "command line")
+  KBUILD_EXTRA_WARN := $(W)
+endif
+
+export KBUILD_EXTRA_WARN
+
 # Kbuild will save output files in the current working directory.
 # This does not need to match to the root of the kernel source tree.
 #
@@ -181,14 +190,11 @@ ifeq ("$(origin O)", "command line")
 endif
 
 ifneq ($(KBUILD_OUTPUT),)
-# Make's built-in functions such as $(abspath ...), $(realpath ...) cannot
-# expand a shell special character '~'. We use a somewhat tedious way here.
-abs_objtree := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) && pwd)
-$(if $(abs_objtree),, \
-     $(error failed to create output directory "$(KBUILD_OUTPUT)"))
-
+# $(realpath ...) gets empty if the path does not exist. Run 'mkdir -p' first.
+$(shell mkdir -p "$(KBUILD_OUTPUT)")
 # $(realpath ...) resolves symlinks
-abs_objtree := $(realpath $(abs_objtree))
+abs_objtree := $(realpath $(KBUILD_OUTPUT))
+$(if $(abs_objtree),,$(error failed to create output directory "$(KBUILD_OUTPUT)"))
 endif # ifneq ($(KBUILD_OUTPUT),)
 
 ifneq ($(words $(subst :, ,$(abs_srctree))), 1)
@@ -288,15 +294,15 @@ may-sync-config	:= 1
 single-build	:=
 
 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
-	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
+    ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
 		need-config :=
-	endif
+    endif
 endif
 
 ifneq ($(filter $(no-sync-config-targets), $(MAKECMDGOALS)),)
-	ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),)
+    ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),)
 		may-sync-config :=
-	endif
+    endif
 endif
 
 need-compiler := $(may-sync-config)
@@ -317,9 +323,9 @@ endif
 # We cannot build single targets and the others at the same time
 ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),)
 	single-build := 1
-	ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
+    ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
 		mixed-build := 1
-	endif
+    endif
 endif
 
 # For "make -j clean all", "make -j mrproper defconfig all", etc.
@@ -609,8 +615,6 @@ export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL KBUILD_RUSTFLAGS_KERNEL
 export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o    \
 			  -name CVS -o -name .pc -o -name .hg -o -name .git \) \
 			  -prune -o
-export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
-			 --exclude CVS --exclude .pc --exclude .hg --exclude .git
 
 # ===========================================================================
 # Rules shared between *config targets and build targets
@@ -982,6 +986,10 @@ NOSTDINC_FLAGS += -nostdinc
 # perform bounds checking.
 KBUILD_CFLAGS += $(call cc-option, -fstrict-flex-arrays=3)
 
+#Currently, disable -Wstringop-overflow for GCC 11, globally.
+KBUILD_CFLAGS-$(CONFIG_CC_NO_STRINGOP_OVERFLOW) += $(call cc-option, -Wno-stringop-overflow)
+KBUILD_CFLAGS-$(CONFIG_CC_STRINGOP_OVERFLOW) += $(call cc-option, -Wstringop-overflow)
+
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= -fno-strict-overflow
 
@@ -1576,7 +1584,8 @@ help:
 	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
 	 echo  ''
 	@echo  'Static analysers:'
-	@echo  '  checkstack      - Generate a list of stack hogs'
+	@echo  '  checkstack      - Generate a list of stack hogs and consider all functions'
+	@echo  '                    with a stack size larger than MINSTACKSIZE (default: 100)'
 	@echo  '  versioncheck    - Sanity check on version.h usage'
 	@echo  '  includecheck    - Check for duplicate included header files'
 	@echo  '  export_report   - List the usages of all exported symbols'
@@ -1657,10 +1666,11 @@ help:
 	@echo  '                       (sparse by default)'
 	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
 	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
-	@echo  '  make W=n   [targets] Enable extra build checks, n=1,2,3 where'
+	@echo  '  make W=n   [targets] Enable extra build checks, n=1,2,3,c,e where'
 	@echo  '		1: warnings which may be relevant and do not occur too often'
 	@echo  '		2: warnings which occur quite often but may still be relevant'
 	@echo  '		3: more obscure warnings, can most likely be ignored'
+	@echo  '		c: extra checks in the configuration stage (Kconfig)'
 	@echo  '		e: warnings are being treated as errors'
 	@echo  '		Multiple levels can be combined with W=12 or W=123'
 	@$(if $(dtstree), \
@@ -2016,9 +2026,10 @@ CHECKSTACK_ARCH := $(SUBARCH)
 else
 CHECKSTACK_ARCH := $(ARCH)
 endif
+MINSTACKSIZE	?= 100
 checkstack:
 	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
-	$(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
+	$(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH) $(MINSTACKSIZE)
 
 kernelrelease:
 	@$(filechk_kernel.release)
diff --git linux-libre-6.7-gnu/arch/Kconfig linux-libre-6.8-gnu/arch/Kconfig
index f4b210ab0612..a5af0edd3eb8 100644
--- linux-libre-6.7-gnu/arch/Kconfig
+++ linux-libre-6.8-gnu/arch/Kconfig
@@ -301,17 +301,13 @@ config ARCH_HAS_DMA_CLEAR_UNCACHED
 config ARCH_HAS_CPU_FINALIZE_INIT
 	bool
 
-# Select if arch init_task must go in the __init_task_data section
-config ARCH_TASK_STRUCT_ON_STACK
-	bool
-
-# Select if arch has its private alloc_task_struct() function
-config ARCH_TASK_STRUCT_ALLOCATOR
+# The architecture has a per-task state that includes the mm's PASID
+config ARCH_HAS_CPU_PASID
 	bool
+	select IOMMU_MM_DATA
 
 config HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	bool
-	depends on !ARCH_TASK_STRUCT_ALLOCATOR
 	help
 	  An architecture should select this to provide hardened usercopy
 	  knowledge about what region of the thread_struct should be
@@ -320,10 +316,6 @@ config HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	  should be implemented. Without this, the entire thread_struct
 	  field in task_struct will be left whitelisted.
 
-# Select if arch has its private alloc_thread_stack() function
-config ARCH_THREAD_STACK_ALLOCATOR
-	bool
-
 # Select if arch wants to size task_struct dynamically via arch_task_struct_size:
 config ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	bool
@@ -681,6 +673,7 @@ config SHADOW_CALL_STACK
 	bool "Shadow Call Stack"
 	depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
 	depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	depends on MMU
 	help
 	  This option enables the compiler's Shadow Call Stack, which
 	  uses a shadow stack to protect function return addresses from
@@ -1470,6 +1463,14 @@ config DYNAMIC_SIGFRAME
 config HAVE_ARCH_NODE_DEV_GROUP
 	bool
 
+config ARCH_HAS_HW_PTE_YOUNG
+	bool
+	help
+	  Architectures that select this option are capable of setting the
+	  accessed bit in PTE entries when using them as part of linear address
+	  translations. Architectures that require runtime check should select
+	  this option and override arch_has_hw_pte_young().
+
 config ARCH_HAS_NONLEAF_PMD_YOUNG
 	bool
 	help
diff --git linux-libre-6.7-gnu/arch/alpha/include/asm/io.h linux-libre-6.8-gnu/arch/alpha/include/asm/io.h
index 7aeaf7c30a6f..4f47a5003fe8 100644
--- linux-libre-6.7-gnu/arch/alpha/include/asm/io.h
+++ linux-libre-6.8-gnu/arch/alpha/include/asm/io.h
@@ -308,7 +308,6 @@ static inline void __iomem *ioremap(unsigned long port, unsigned long size)
 }
 
 #define ioremap_wc ioremap
-#define ioremap_uc ioremap
 
 static inline void iounmap(volatile void __iomem *addr)
 {
@@ -651,12 +650,6 @@ extern void outsl (unsigned long port, const void *src, unsigned long count);
 #endif
 #define RTC_ALWAYS_BCD	0
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
 /*
  * These get provided from <asm-generic/iomap.h> since alpha does not
  * select GENERIC_IOMAP.
diff --git linux-libre-6.7-gnu/arch/alpha/include/asm/mmu_context.h linux-libre-6.8-gnu/arch/alpha/include/asm/mmu_context.h
index 4eea7c616992..29a3e3a1f02b 100644
--- linux-libre-6.7-gnu/arch/alpha/include/asm/mmu_context.h
+++ linux-libre-6.8-gnu/arch/alpha/include/asm/mmu_context.h
@@ -183,6 +183,8 @@ ev4_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
 }
 
 extern void __load_new_mm_context(struct mm_struct *);
+asmlinkage void do_page_fault(unsigned long address, unsigned long mmcsr,
+			      long cause, struct pt_regs *regs);
 
 #ifdef CONFIG_SMP
 #define check_mmu_context()					\
diff --git linux-libre-6.7-gnu/arch/alpha/kernel/asm-offsets.c linux-libre-6.8-gnu/arch/alpha/kernel/asm-offsets.c
index b121294bee26..bf1eedd27cf7 100644
--- linux-libre-6.7-gnu/arch/alpha/kernel/asm-offsets.c
+++ linux-libre-6.8-gnu/arch/alpha/kernel/asm-offsets.c
@@ -12,7 +12,7 @@
 #include <linux/kbuild.h>
 #include <asm/io.h>
 
-void foo(void)
+static void __used foo(void)
 {
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
diff --git linux-libre-6.7-gnu/arch/alpha/kernel/rtc.c linux-libre-6.8-gnu/arch/alpha/kernel/rtc.c
index fb3025396ac9..cfdf90bc8b3f 100644
--- linux-libre-6.7-gnu/arch/alpha/kernel/rtc.c
+++ linux-libre-6.8-gnu/arch/alpha/kernel/rtc.c
@@ -80,7 +80,7 @@ init_rtc_epoch(void)
 static int
 alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	int ret = mc146818_get_time(tm);
+	int ret = mc146818_get_time(tm, 10);
 
 	if (ret < 0) {
 		dev_err_ratelimited(dev, "unable to read current time\n");
diff --git linux-libre-6.7-gnu/arch/alpha/kernel/srmcons.c linux-libre-6.8-gnu/arch/alpha/kernel/srmcons.c
index d6139dbae4ac..feaf89f6936b 100644
--- linux-libre-6.7-gnu/arch/alpha/kernel/srmcons.c
+++ linux-libre-6.8-gnu/arch/alpha/kernel/srmcons.c
@@ -53,7 +53,7 @@ srmcons_do_receive_chars(struct tty_port *port)
 	do {
 		result.as_long = callback_getc(0);
 		if (result.bits.status < 2) {
-			tty_insert_flip_char(port, (char)result.bits.c, 0);
+			tty_insert_flip_char(port, (u8)result.bits.c, 0);
 			count++;
 		}
 	} while((result.bits.status & 1) && (++loops < 10));
@@ -88,30 +88,27 @@ srmcons_receive_chars(struct timer_list *t)
 }
 
 /* called with callback_lock held */
-static int
-srmcons_do_write(struct tty_port *port, const char *buf, int count)
+static void
+srmcons_do_write(struct tty_port *port, const u8 *buf, size_t count)
 {
-	static char str_cr[1] = "\r";
-	long c, remaining = count;
+	size_t c;
 	srmcons_result result;
-	char *cur;
-	int need_cr;
 
-	for (cur = (char *)buf; remaining > 0; ) {
-		need_cr = 0;
+	while (count > 0) {
+		bool need_cr = false;
 		/* 
 		 * Break it up into reasonable size chunks to allow a chance
 		 * for input to get in
 		 */
-		for (c = 0; c < min_t(long, 128L, remaining) && !need_cr; c++)
-			if (cur[c] == '\n')
-				need_cr = 1;
+		for (c = 0; c < min_t(size_t, 128U, count) && !need_cr; c++)
+			if (buf[c] == '\n')
+				need_cr = true;
 		
 		while (c > 0) {
-			result.as_long = callback_puts(0, cur, c);
+			result.as_long = callback_puts(0, buf, c);
 			c -= result.bits.c;
-			remaining -= result.bits.c;
-			cur += result.bits.c;
+			count -= result.bits.c;
+			buf += result.bits.c;
 
 			/*
 			 * Check for pending input iff a tty port was provided
@@ -121,12 +118,11 @@ srmcons_do_write(struct tty_port *port, const char *buf, int count)
 		}
 
 		while (need_cr) {
-			result.as_long = callback_puts(0, str_cr, 1);
+			result.as_long = callback_puts(0, "\r", 1);
 			if (result.bits.c > 0)
-				need_cr = 0;
+				need_cr = false;
 		}
 	}
-	return count;
 }
 
 static ssize_t
@@ -135,7 +131,7 @@ srmcons_write(struct tty_struct *tty, const u8 *buf, size_t count)
 	unsigned long flags;
 
 	spin_lock_irqsave(&srmcons_callback_lock, flags);
-	srmcons_do_write(tty->port, (const char *) buf, count);
+	srmcons_do_write(tty->port, buf, count);
 	spin_unlock_irqrestore(&srmcons_callback_lock, flags);
 
 	return count;
diff --git linux-libre-6.7-gnu/arch/alpha/kernel/syscalls/syscall.tbl linux-libre-6.8-gnu/arch/alpha/kernel/syscalls/syscall.tbl
index 18c842ca6c32..8ff110826ce2 100644
--- linux-libre-6.7-gnu/arch/alpha/kernel/syscalls/syscall.tbl
+++ linux-libre-6.8-gnu/arch/alpha/kernel/syscalls/syscall.tbl
@@ -496,3 +496,8 @@
 564	common	futex_wake			sys_futex_wake
 565	common	futex_wait			sys_futex_wait
 566	common	futex_requeue			sys_futex_requeue
+567	common	statmount			sys_statmount
+568	common	listmount			sys_listmount
+569	common	lsm_get_self_attr		sys_lsm_get_self_attr
+570	common	lsm_set_self_attr		sys_lsm_set_self_attr
+571	common	lsm_list_modules		sys_lsm_list_modules
diff --git linux-libre-6.7-gnu/arch/alpha/kernel/traps.c linux-libre-6.8-gnu/arch/alpha/kernel/traps.c
index d9a67b370e04..7fc72aeb7398 100644
--- linux-libre-6.7-gnu/arch/alpha/kernel/traps.c
+++ linux-libre-6.8-gnu/arch/alpha/kernel/traps.c
@@ -9,6 +9,7 @@
  * This file initializes the trap entry points
  */
 
+#include <linux/cpu.h>
 #include <linux/jiffies.h>
 #include <linux/mm.h>
 #include <linux/sched/signal.h>
diff --git linux-libre-6.7-gnu/arch/alpha/lib/Makefile linux-libre-6.8-gnu/arch/alpha/lib/Makefile
index 1cc74f7b50ef..6a779b9018fd 100644
--- linux-libre-6.7-gnu/arch/alpha/lib/Makefile
+++ linux-libre-6.8-gnu/arch/alpha/lib/Makefile
@@ -4,7 +4,6 @@
 #
 
 asflags-y := $(KBUILD_CFLAGS)
-ccflags-y := -Werror
 
 # Many of these routines have implementations tuned for ev6.
 # Choose them iff we're targeting ev6 specifically.
diff --git linux-libre-6.7-gnu/arch/alpha/mm/Makefile linux-libre-6.8-gnu/arch/alpha/mm/Makefile
index bd770302eb82..101dbd06b4ce 100644
--- linux-libre-6.7-gnu/arch/alpha/mm/Makefile
+++ linux-libre-6.8-gnu/arch/alpha/mm/Makefile
@@ -3,6 +3,4 @@
 # Makefile for the linux alpha-specific parts of the memory manager.
 #
 
-ccflags-y := -Werror
-
 obj-y	:= init.o fault.o
diff --git linux-libre-6.7-gnu/arch/arc/include/asm/cacheflush.h linux-libre-6.8-gnu/arch/arc/include/asm/cacheflush.h
index 563af3e75f01..329c94cd45d8 100644
--- linux-libre-6.7-gnu/arch/arc/include/asm/cacheflush.h
+++ linux-libre-6.8-gnu/arch/arc/include/asm/cacheflush.h
@@ -40,6 +40,7 @@ void dma_cache_wback(phys_addr_t start, unsigned long sz);
 
 /* TBD: optimize this */
 #define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
 #define flush_cache_dup_mm(mm)			/* called on fork (VIVT only) */
diff --git linux-libre-6.7-gnu/arch/arc/include/asm/jump_label.h linux-libre-6.8-gnu/arch/arc/include/asm/jump_label.h
index 9d9618079739..a339223d9e05 100644
--- linux-libre-6.7-gnu/arch/arc/include/asm/jump_label.h
+++ linux-libre-6.8-gnu/arch/arc/include/asm/jump_label.h
@@ -31,7 +31,7 @@
 static __always_inline bool arch_static_branch(struct static_key *key,
 					       bool branch)
 {
-	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
 		 "1:							\n"
 		 "nop							\n"
 		 ".pushsection __jump_table, \"aw\"			\n"
@@ -47,7 +47,7 @@ l_yes:
 static __always_inline bool arch_static_branch_jump(struct static_key *key,
 						    bool branch)
 {
-	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
 		 "1:							\n"
 		 "b %l[l_yes]						\n"
 		 ".pushsection __jump_table, \"aw\"			\n"
diff --git linux-libre-6.7-gnu/arch/arc/include/asm/page.h linux-libre-6.8-gnu/arch/arc/include/asm/page.h
index 02b53ad811fb..def0dfb95b43 100644
--- linux-libre-6.7-gnu/arch/arc/include/asm/page.h
+++ linux-libre-6.8-gnu/arch/arc/include/asm/page.h
@@ -84,15 +84,6 @@ typedef struct {
 
 typedef struct page *pgtable_t;
 
-/*
- * Use virt_to_pfn with caution:
- * If used in pte or paddr related macros, it could cause truncation
- * in PAE40 builds
- * As a rule of thumb, only use it in helpers starting with virt_
- * You have been warned !
- */
-#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
-
 /*
  * When HIGHMEM is enabled we have holes in the memory map so we need
  * pfn_valid() that takes into account the actual extents of the physical
@@ -122,6 +113,18 @@ extern int pfn_valid(unsigned long pfn);
 #define __pa(vaddr)  		((unsigned long)(vaddr))
 #define __va(paddr)  		((void *)((unsigned long)(paddr)))
 
+/*
+ * Use virt_to_pfn with caution:
+ * If used in pte or paddr related macros, it could cause truncation
+ * in PAE40 builds
+ * As a rule of thumb, only use it in helpers starting with virt_
+ * You have been warned !
+ */
+static inline unsigned long virt_to_pfn(const void *kaddr)
+{
+	return __pa(kaddr) >> PAGE_SHIFT;
+}
+
 #define virt_to_page(kaddr)	pfn_to_page(virt_to_pfn(kaddr))
 #define virt_addr_valid(kaddr)  pfn_valid(virt_to_pfn(kaddr))
 
diff --git linux-libre-6.7-gnu/arch/arc/include/asm/pgtable-levels.h linux-libre-6.8-gnu/arch/arc/include/asm/pgtable-levels.h
index fc417c75c24d..86e148226463 100644
--- linux-libre-6.7-gnu/arch/arc/include/asm/pgtable-levels.h
+++ linux-libre-6.8-gnu/arch/arc/include/asm/pgtable-levels.h
@@ -159,7 +159,7 @@
 #define pmd_clear(xp)		do { pmd_val(*(xp)) = 0; } while (0)
 #define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
 #define pmd_pfn(pmd)		((pmd_val(pmd) & PAGE_MASK) >> PAGE_SHIFT)
-#define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
+#define pmd_page(pmd)		virt_to_page((void *)pmd_page_vaddr(pmd))
 #define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
 #define pmd_pgtable(pmd)	((pgtable_t) pmd_page(pmd))
 
diff --git linux-libre-6.7-gnu/arch/arc/mm/dma.c linux-libre-6.8-gnu/arch/arc/mm/dma.c
index 2a7fbbb83b70..197707bc7658 100644
--- linux-libre-6.7-gnu/arch/arc/mm/dma.c
+++ linux-libre-6.8-gnu/arch/arc/mm/dma.c
@@ -91,7 +91,7 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
  * Plug in direct dma map ops.
  */
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+			bool coherent)
 {
 	/*
 	 * IOC hardware snoops all DMA traffic keeping the caches consistent
diff --git linux-libre-6.7-gnu/arch/arm/Kconfig linux-libre-6.8-gnu/arch/arm/Kconfig
index f8567e95f98b..0af6709570d1 100644
--- linux-libre-6.7-gnu/arch/arm/Kconfig
+++ linux-libre-6.8-gnu/arch/arm/Kconfig
@@ -35,6 +35,7 @@ config ARM
 	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE
+	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_USE_MEMTEST
@@ -340,83 +341,7 @@ config ARCH_MULTIPLATFORM
 	  Selecting N here allows using those options, including
 	  DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y.
 
-menu "Platform selection"
-	depends on MMU
-
-comment "CPU Core family selection"
-
-config ARCH_MULTI_V4
-	bool "ARMv4 based platforms (FA526, StrongARM)"
-	depends on !ARCH_MULTI_V6_V7
-	# https://github.com/llvm/llvm-project/issues/50764
-	depends on !LD_IS_LLD || LLD_VERSION >= 160000
-	select ARCH_MULTI_V4_V5
-	select CPU_FA526 if !(CPU_SA110 || CPU_SA1100)
-
-config ARCH_MULTI_V4T
-	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	# https://github.com/llvm/llvm-project/issues/50764
-	depends on !LD_IS_LLD || LLD_VERSION >= 160000
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
-		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
-		CPU_ARM925T || CPU_ARM940T)
-
-config ARCH_MULTI_V5
-	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
-		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
-		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
-
-config ARCH_MULTI_V4_V5
-	bool
-
-config ARCH_MULTI_V6
-	bool "ARMv6 based platforms (ARM11)"
-	select ARCH_MULTI_V6_V7
-	select CPU_V6K
-
-config ARCH_MULTI_V7
-	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
-	default y
-	select ARCH_MULTI_V6_V7
-	select CPU_V7
-	select HAVE_SMP
-
-config ARCH_MULTI_V6_V7
-	bool
-	select MIGHT_HAVE_CACHE_L2X0
-
-config ARCH_MULTI_CPU_AUTO
-	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
-	select ARCH_MULTI_V5
-
-endmenu
-
-config ARCH_VIRT
-	bool "Dummy Virtual Machine"
-	depends on ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_GIC_V2M if PCI
-	select ARM_GIC_V3
-	select ARM_GIC_V3_ITS if PCI
-	select ARM_PSCI
-	select HAVE_ARM_ARCH_TIMER
-
-config ARCH_AIROHA
-	bool "Airoha SoC Support"
-	depends on ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_GIC_V3
-	select ARM_PSCI
-	select HAVE_ARM_ARCH_TIMER
-	help
-	  Support for Airoha EN7523 SoCs
+source "arch/arm/Kconfig.platforms"
 
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
@@ -429,8 +354,6 @@ source "arch/arm/mach-alpine/Kconfig"
 
 source "arch/arm/mach-artpec/Kconfig"
 
-source "arch/arm/mach-asm9260/Kconfig"
-
 source "arch/arm/mach-aspeed/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
@@ -479,8 +402,6 @@ source "arch/arm/mach-milbeaut/Kconfig"
 
 source "arch/arm/mach-mmp/Kconfig"
 
-source "arch/arm/mach-moxart/Kconfig"
-
 source "arch/arm/mach-mstar/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
@@ -493,8 +414,6 @@ source "arch/arm/mach-nomadik/Kconfig"
 
 source "arch/arm/mach-npcm/Kconfig"
 
-source "arch/arm/mach-nspire/Kconfig"
-
 source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
@@ -505,8 +424,6 @@ source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-qcom/Kconfig"
 
-source "arch/arm/mach-rda/Kconfig"
-
 source "arch/arm/mach-realtek/Kconfig"
 
 source "arch/arm/mach-rpc/Kconfig"
@@ -529,14 +446,10 @@ source "arch/arm/mach-sti/Kconfig"
 
 source "arch/arm/mach-stm32/Kconfig"
 
-source "arch/arm/mach-sunplus/Kconfig"
-
 source "arch/arm/mach-sunxi/Kconfig"
 
 source "arch/arm/mach-tegra/Kconfig"
 
-source "arch/arm/mach-uniphier/Kconfig"
-
 source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
@@ -1362,7 +1275,7 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
diff --git linux-libre-6.7-gnu/arch/arm/Kconfig.debug linux-libre-6.8-gnu/arch/arm/Kconfig.debug
index fc2b41d41447..5fbbac1b708b 100644
--- linux-libre-6.7-gnu/arch/arm/Kconfig.debug
+++ linux-libre-6.8-gnu/arch/arm/Kconfig.debug
@@ -1809,15 +1809,8 @@ config DEBUG_UNCOMPRESS
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
 		     !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
 	help
-	  This option influences the normal decompressor output for
-	  multiplatform kernels.  Normally, multiplatform kernels disable
-	  decompressor output because it is not possible to know where to
-	  send the decompressor output.
-
-	  When this option is set, the selected DEBUG_LL output method
-	  will be re-used for normal decompressor output on multiplatform
-	  kernels.
-	  
+	  Say Y here to enable debug output in the decompressor code, using
+	  the selected DEBUG_LL output method.
 
 config UNCOMPRESS_INCLUDE
 	string
diff --git linux-libre-6.7-gnu/arch/arm/Kconfig.platforms linux-libre-6.8-gnu/arch/arm/Kconfig.platforms
new file mode 100644
index 000000000000..845ab08e20a4
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/Kconfig.platforms
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menu "Platform selection"
+	depends on MMU
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526, StrongARM)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_FA526 if !(CPU_SA110 || CPU_SA1100)
+
+config ARCH_MULTI_V4T
+	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
+		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
+		CPU_ARM925T || CPU_ARM940T)
+
+config ARCH_MULTI_V5
+	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
+		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
+		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
+
+config ARCH_MULTI_V4_V5
+	bool
+
+config ARCH_MULTI_V6
+	bool "ARMv6 based platforms (ARM11)"
+	select ARCH_MULTI_V6_V7
+	select CPU_V6K
+
+config ARCH_MULTI_V7
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+	default y
+	select ARCH_MULTI_V6_V7
+	select CPU_V7
+	select HAVE_SMP
+
+config ARCH_MULTI_V6_V7
+	bool
+	select MIGHT_HAVE_CACHE_L2X0
+
+config ARCH_MULTI_CPU_AUTO
+	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+	select ARCH_MULTI_V5
+
+endmenu
+
+config ARCH_VIRT
+	bool "Dummy Virtual Machine"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V2M if PCI
+	select ARM_GIC_V3
+	select ARM_GIC_V3_ITS if PCI
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for Airoha EN7523 SoCs
+
+config MACH_ASM9260
+	bool "Alphascale ASM9260"
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select ASM9260_TIMER
+	help
+	  Support for Alphascale ASM9260 based platform.
+
+menuconfig ARCH_MOXART
+	bool "MOXA ART SoC"
+	depends on ARCH_MULTI_V4
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_FA526
+	select ARM_DMA_MEM_BUFFERABLE
+	select FARADAY_FTINTC010
+	select FTTMR010_TIMER
+	select GPIOLIB
+	select PHYLIB if NETDEVICES
+	help
+	  Say Y here if you want to run your kernel on hardware with a
+	  MOXA ART SoC.
+	  The MOXA ART SoC is based on a Faraday FA526 ARMv4 32-bit
+	  192 MHz CPU with MMU and 16KB/8KB D/I-cache (UC-7112-LX).
+	  Used on models UC-7101, UC-7112/UC-7110, IA240/IA241, IA3341.
+
+if ARCH_MOXART
+
+config MACH_UC7112LX
+	bool "MOXA UC-7112-LX"
+	depends on ARCH_MOXART
+	help
+	  Say Y here if you intend to run this kernel on a MOXA
+	  UC-7112-LX embedded computer.
+
+endif
+
+config ARCH_NSPIRE
+	bool "TI-NSPIRE based"
+	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select GENERIC_IRQ_CHIP
+	select ARM_AMBA
+	select ARM_VIC
+	select ARM_TIMER_SP804
+	select NSPIRE_TIMER
+	select POWER_RESET
+	select POWER_RESET_SYSCON
+	help
+	  This enables support for systems using the TI-NSPIRE CPU
+
+config ARCH_RDA
+	bool "RDA Micro SoCs"
+	depends on ARCH_MULTI_V7
+	select RDA_INTC
+	select RDA_TIMER
+	help
+	  This enables support for the RDA Micro 8810PL SoC family.
+
+menuconfig ARCH_SUNPLUS
+	bool "Sunplus SoCs"
+	depends on ARCH_MULTI_V7
+	help
+	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
+	  such as the Banana Pi BPI-F2S development board (and derivatives).
+	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
+	  (<https://tibbo.com/store/plus1.html>)
+
+if ARCH_SUNPLUS
+
+config SOC_SP7021
+	bool "Sunplus SP7021 SoC support"
+	default ARCH_SUNPLUS
+	select HAVE_ARM_ARCH_TIMER
+	select ARM_GIC
+	select ARM_PSCI
+	select PINCTRL
+	select PINCTRL_SPPCTL
+	select SERIAL_SUNPLUS if TTY
+	select SERIAL_SUNPLUS_CONSOLE if TTY
+	help
+	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
+	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
+	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
+	  It is designed for industrial control.
+
+endif
+
+config ARCH_UNIPHIER
+	bool "Socionext UniPhier SoCs"
+	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
+	select ARM_GLOBAL_TIMER
+	select ARM_GIC
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select PINCTRL
+	select RESET_CONTROLLER
+	help
+	  Support for UniPhier SoC family developed by Socionext Inc.
+	  (formerly, System LSI Business Division of Panasonic Corporation)
diff --git linux-libre-6.7-gnu/arch/arm/Makefile linux-libre-6.8-gnu/arch/arm/Makefile
index 5ba42f69f8ce..473280d5adce 100644
--- linux-libre-6.7-gnu/arch/arm/Makefile
+++ linux-libre-6.8-gnu/arch/arm/Makefile
@@ -167,7 +167,6 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_ACTIONS)		+= actions
-machine-$(CONFIG_ARCH_AIROHA)		+= airoha
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
 machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
 machine-$(CONFIG_ARCH_ASPEED)           += aspeed
@@ -192,7 +191,6 @@ machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
-machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_MXC)		+= imx
@@ -202,7 +200,6 @@ machine-$(CONFIG_ARCH_MXS)		+= mxs
 machine-$(CONFIG_ARCH_MSTARV7)		+= mstar
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NPCM)		+= npcm
-machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
@@ -218,7 +215,6 @@ machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
 machine-$(CONFIG_ARCH_INTEL_SOCFPGA)	+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
-machine-$(CONFIG_ARCH_SUNPLUS)		+= sunplus
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U8500)		+= ux500
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/amazon/alpine.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/amazon/alpine.dtsi
index ff68dfb4eb78..90bd12feac01 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/amazon/alpine.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/amazon/alpine.dtsi
@@ -167,7 +167,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <96>;
 			al,msi-num-spis = <64>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
index e899de681f47..5be0e8fd2633 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -45,8 +45,8 @@
 		num-chipselects = <1>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
index a677c827e758..5a8169bbda87 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -80,8 +80,8 @@
 		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index 3f6010ef2b86..213023bc5aec 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -456,7 +456,7 @@
 	status = "okay";
 
 	tpm: tpm@2e {
-		compatible = "tcg,tpm-tis-i2c";
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
 		reg = <0x2e>;
 	};
 };
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 530491ae5eb2..857cb26ed6d7 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -466,7 +466,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -482,7 +481,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -498,7 +496,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -515,7 +512,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -532,7 +528,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -549,7 +544,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -566,7 +560,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -583,7 +576,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -600,7 +592,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -617,7 +608,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -634,7 +624,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -651,7 +640,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -668,7 +656,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -685,7 +672,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 04f98d1dbb97..e6f3cf3c721e 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -363,6 +363,7 @@
 				interrupts = <40>;
 				reg = <0x1e780200 0x0100>;
 				clocks = <&syscon ASPEED_CLK_APB>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -594,7 +595,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -610,7 +610,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -626,7 +625,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -643,7 +641,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -660,7 +657,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -677,7 +673,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -694,7 +689,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -711,7 +705,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -728,7 +721,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -745,7 +737,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -762,7 +753,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -779,7 +769,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -796,7 +785,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -813,7 +801,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index c4d1faade8be..29f94696d8b1 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -474,6 +474,7 @@
 				reg = <0x1e780500 0x100>;
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -488,6 +489,7 @@
 				reg = <0x1e780600 0x100>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -902,7 +904,6 @@
 	i2c0: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x80 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -917,7 +918,6 @@
 	i2c1: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x100 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -932,7 +932,6 @@
 	i2c2: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x180 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -947,7 +946,6 @@
 	i2c3: i2c-bus@200 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x200 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -962,7 +960,6 @@
 	i2c4: i2c-bus@280 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x280 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -977,7 +974,6 @@
 	i2c5: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x300 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -992,7 +988,6 @@
 	i2c6: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x380 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1007,7 +1002,6 @@
 	i2c7: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x400 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1022,7 +1016,6 @@
 	i2c8: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x480 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1037,7 +1030,6 @@
 	i2c9: i2c-bus@500 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x500 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1052,7 +1044,6 @@
 	i2c10: i2c-bus@580 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x580 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1067,7 +1058,6 @@
 	i2c11: i2c-bus@600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x600 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1082,7 +1072,6 @@
 	i2c12: i2c-bus@680 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x680 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1097,7 +1086,6 @@
 	i2c13: i2c-bus@700 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x700 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1112,7 +1100,6 @@
 	i2c14: i2c-bus@780 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x780 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1127,7 +1114,6 @@
 	i2c15: i2c-bus@800 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x800 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
index 31590d3186a2..00e5887c926f 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -35,8 +35,8 @@
 		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
 		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
index f9f79ed82518..07ca0d993c9f 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
@@ -167,6 +167,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&mailbox>;
 			interrupts = <0>;
 		};
@@ -247,6 +248,7 @@
 			gpio-controller;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		i2c1: i2c@1800b000 {
@@ -518,6 +520,7 @@
 			gpio-controller;
 
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 42 1>,
 					<&pinctrl 1 44 3>,
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
index 788a6806191a..75545b10ef2f 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
@@ -200,6 +200,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
index 9d20ba3b1ffb..6a4482c93167 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
@@ -180,6 +180,7 @@
 			gpio-controller;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 0 32>;
 		};
@@ -352,6 +353,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
index 98817a6675b9..d233a191c139 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
 
+#include <dt-bindings/power/raspberrypi-power.h>
 #include <dt-bindings/reset/raspberrypi,firmware-reset.h>
 
 / {
@@ -76,3 +77,7 @@
 &vchiq {
 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&xhci {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/broadcom/bcm2711.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/broadcom/bcm2711.dtsi
index 4a379a14966d..22c7f1561344 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/broadcom/bcm2711.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -604,6 +604,20 @@
 			};
 		};
 
+		xhci: usb@7e9c0000 {
+			compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2";
+			reg = <0x0 0x7e9c0000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			/* DWC2 and this IP block share the same USB PHY,
+			 * enabling both at the same time results in lockups.
+			 * So keep this node disabled and let the bootloader
+			 * decide which interface should be enabled.
+			 */
+			status = "disabled";
+		};
+
 		v3d: gpu@7ec00000 {
 			compatible = "brcm,2711-v3d";
 			reg = <0x0 0x7ec00000 0x4000>,
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/broadcom/bcm63138.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/broadcom/bcm63138.dtsi
index 93281c47c9ba..4ef02283612b 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/broadcom/bcm63138.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/broadcom/bcm63138.dtsi
@@ -232,6 +232,12 @@
 			interrupt-names = "nand";
 		};
 
+		serial@4400 {
+			compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart";
+			reg = <0x4400 0x1e0>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		bootlut: bootlut@8000 {
 			compatible = "brcm,bcm63138-bootlut";
 			reg = <0x8000 0x50>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts linux-libre-6.8-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
index 4d70f6afd13a..6d5e69035f94 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -60,6 +60,8 @@
 			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
 			 * each handling all IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts linux-libre-6.8-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
index 9ec0169bacf8..5f4c849915db 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -89,6 +89,8 @@
 			 * The slots have Ethernet, Ethernet, NEC and MPCI.
 			 * The IDSELs are 11, 12, 13, 14.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 11 - Ethernet A */
 			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts linux-libre-6.8-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
index 90fd51b36e7d..2c89db34c8d8 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
@@ -165,6 +165,24 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				/*
+				 * PHY 0..4 are internal to the MV88E6060 switch but appear
+				 * as independent devices.
+				 */
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+
+				/* Altima AMI101L used by the WAN port */
 				phy9: ethernet-phy@9 {
 					reg = <9>;
 				};
@@ -181,21 +199,25 @@
 						port@0 {
 							reg = <0>;
 							label = "lan1";
+							phy-handle = <&phy0>;
 						};
 
 						port@1 {
 							reg = <1>;
 							label = "lan2";
+							phy-handle = <&phy1>;
 						};
 
 						port@2 {
 							reg = <2>;
 							label = "lan3";
+							phy-handle = <&phy2>;
 						};
 
 						port@3 {
 							reg = <3>;
 							label = "lan4";
+							phy-handle = <&phy3>;
 						};
 
 						port@5 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
index 4c1d140f40f8..35be14150f41 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
@@ -768,7 +768,7 @@
 			status = "disabled";
 		};
 
-		nand0: nand@ff900000 {
+		nand0: nand-controller@ff900000 {
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			compatible = "altr,socfpga-denali-nand";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
index f36063c57c7f..6b6e77596ffa 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
@@ -669,7 +669,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@ffb90000 {
+		nand: nand-controller@ffb90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-denali-nand";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
index 11ccdc6c2dc6..0434f1c7b665 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
@@ -17,8 +17,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <3>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
index c48385702a85..7342f5942b0d 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
@@ -124,8 +124,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
index c7f5fa0ba0f2..d37a982e8571 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
@@ -129,8 +129,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
index 3dd99c7c95e0..9e4db7407f1a 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
@@ -174,8 +174,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
index 2564671fc1c6..ce0d6514eeb5 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -121,8 +121,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
index e0630b0eed03..65f390bf8975 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
@@ -229,8 +229,6 @@
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
 
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
@@ -246,8 +244,6 @@
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
 
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-370-rd.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-370-rd.dts
index b459a670f615..f23f6b3fc8f3 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-370-rd.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-370-rd.dts
@@ -95,7 +95,7 @@
 			gpio-fan {
 				compatible = "gpio-fan";
 				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-				gpio-fan,speed-map = <0 0 3000 1>;
+				gpio-fan,speed-map = <0 0>, <3000 1>;
 				pinctrl-0 = <&fan_pins>;
 				pinctrl-names = "default";
 			};
@@ -149,39 +149,37 @@
 		};
 	};
 
-	switch: switch@10 {
+	switch: ethernet-switch@10 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0x10>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
@@ -196,25 +194,25 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switchphy0: switchphy@0 {
+			switchphy0: ethernet-phy@0 {
 				reg = <0>;
 				interrupt-parent = <&switch>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy1: switchphy@1 {
+			switchphy1: ethernet-phy@1 {
 				reg = <1>;
 				interrupt-parent = <&switch>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy2: switchphy@2 {
+			switchphy2: ethernet-phy@2 {
 				reg = <2>;
 				interrupt-parent = <&switch>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy3: switchphy@3 {
+			switchphy3: ethernet-phy@3 {
 				reg = <3>;
 				interrupt-parent = <&switch>;
 				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
index 8dd242e668e6..6ec3dd3337f4 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
@@ -25,9 +25,9 @@
 
 	gpio-fan {
 		gpio-fan,speed-map =
-			<   0 3
-			  950 2
-			 1400 1
-			 1800 0>;
+			<   0 3>,
+			< 950 2>,
+			<1400 1>,
+			<1800 0>;
 	};
 };
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
index 370ca9c43247..3011578a3124 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
@@ -106,10 +106,10 @@
 
 	gpio-fan {
 		gpio-fan,speed-map =
-			<   0 3
-			  800 2
-			  1050 1
-			  1300 0>;
+			<   0 3>,
+			< 800 2>,
+			<1050 1>,
+			<1300 0>;
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
index b07d11d1f124..02599a3e9816 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
@@ -113,14 +113,14 @@
 			 &gpio2  0 GPIO_ACTIVE_HIGH
 			 &gpio2  1 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       1000 1
-				       1150 2
-				       1350 4
-				       1500 3
-				       1650 5
-				       1750 6
-				       1900 7 >;
+		gpio-fan,speed-map = <   0 0>,
+				     <1000 1>,
+				     <1150 2>,
+				     <1350 4>,
+				     <1500 3>,
+				     <1650 5>,
+				     <1750 6>,
+				     <1900 7>;
 	};
 
 	gpio-leds {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
index f4c4b213ef4e..5baf83e5253d 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
@@ -77,51 +77,49 @@
 	pinctrl-0 = <&mdio_pins>;
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio1>;
 		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&switch_interrupt_pins>;
 		pinctrl-names = "default";
-		#size-cells = <0>;
 		reg = <0>;
 
 		mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -142,11 +140,11 @@
 			};
 		};
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				ethernet = <&eth0>;
 				phy-mode = "rgmii";
 				reg = <0>;
@@ -158,55 +156,55 @@
 				};
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 				reg = <1>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				label = "lan2";
 				phy-handle = <&switch0phy2>;
 				reg = <2>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 				reg = <3>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				label = "lan4";
 				phy-handle = <&switch0phy4>;
 				reg = <4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				label = "lan5";
 				phy-handle = <&switch0phy5>;
 				reg = <5>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				label = "lan6";
 				phy-handle = <&switch0phy6>;
 				reg = <6>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				label = "lan7";
 				phy-handle = <&switch0phy7>;
 				reg = <7>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				label = "lan8";
 				phy-handle = <&switch0phy8>;
 				reg = <8>;
 			};
 
-			port@9 {
+			ethernet-port@9 {
 				/* 88X3310P external phy */
 				label = "lan9";
 				phy-handle = <&phy1>;
@@ -214,7 +212,7 @@
 				reg = <9>;
 			};
 
-			port@a {
+			ethernet-port@a {
 				/* 88X3310P external phy */
 				label = "lan10";
 				phy-handle = <&phy2>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
index 1990f7d0cc79..1707d1b01545 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -7,66 +7,66 @@
 };
 
 &mdio {
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6190";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
 		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan8";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan7";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan6";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan5";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "lan4";
 				phy-handle = <&switch0phy4>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				label = "lan3";
 				phy-handle = <&switch0phy5>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				reg = <7>;
 				label = "lan2";
 				phy-handle = <&switch0phy6>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				reg = <8>;
 				label = "lan1";
 				phy-handle = <&switch0phy7>;
 			};
 
-			port@10 {
+			ethernet-port@10 {
 				reg = <10>;
 				phy-mode = "2500base-x";
 
@@ -83,35 +83,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@1 {
+			switch0phy0: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy1: switch0phy1@2 {
+			switch0phy1: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy2: switch0phy2@3 {
+			switch0phy2: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy3: switch0phy3@4 {
+			switch0phy3: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy4: switch0phy4@5 {
+			switch0phy4: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy5: switch0phy5@6 {
+			switch0phy5: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy6: switch0phy6@7 {
+			switch0phy6: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy7: switch0phy7@8 {
+			switch0phy7: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
index b795ad573891..a7678a784c18 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
@@ -11,42 +11,42 @@
 };
 
 &mdio {
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
 		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan2";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan4";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "2500base-x";
 				ethernet = <&eth1>;
@@ -63,19 +63,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy3: switch0phy3@14 {
+			switch0phy3: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
index fc8216fd9f60..4116ed60f709 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
@@ -158,42 +158,40 @@
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "wan";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "sgmii";
 				ethernet = <&eth2>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
index ea91ff964d94..6caa5c50175a 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
@@ -131,14 +131,14 @@
 			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
 				<&gpio1 17 GPIO_ACTIVE_HIGH>,
 				<&gpio1 16 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <   0 0
-					      1500 1
-					      2500 2
-					      3000 3
-					      3400 4
-					      3700 5
-					      3900 6
-					      4000 7>;
+			gpio-fan,speed-map = <   0 0>,
+					     <1500 1>,
+					     <2500 2>,
+					     <3000 3>,
+					     <3400 4>,
+					     <3700 5>,
+					     <3900 6>,
+					     <4000 7>;
 			#cooling-cells = <2>;
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
index 2d8d319bec83..7b755bb4e4e7 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -435,12 +435,10 @@
 	};
 
 	/* Switch MV88E6176 at address 0x10 */
-	switch@10 {
+	ethernet-switch@10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&swint_pins>;
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		dsa,member = <0 0>;
 		reg = <0x10>;
@@ -448,36 +446,36 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			ports@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			ports@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 			};
 
-			ports@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			ports@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 			};
 
-			ports@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan4";
 			};
 
-			ports@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
@@ -488,7 +486,7 @@
 				};
 			};
 
-			ports@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				ethernet = <&eth0>;
 				phy-mode = "rgmii-id";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-388-clearfog.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
index 32c569df142f..3290ccad2374 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
@@ -92,44 +92,42 @@
 &mdio {
 	status = "okay";
 
-	switch@4 {
+	ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <4>;
 		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
 		pinctrl-names = "default";
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan5";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan4";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan3";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan2";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan1";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "1000base-x";
@@ -140,7 +138,7 @@
 				};
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				/* 88E1512 external phy */
 				reg = <6>;
 				label = "lan6";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-388-gp.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-388-gp.dts
index e2ba50520b6b..1de0a172aa5f 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-388-gp.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-388-gp.dts
@@ -237,8 +237,8 @@
 		gpio-fan {
 			compatible = "gpio-fan";
 			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <	 0 0
-					      3000 1>;
+			gpio-fan,speed-map = <	 0 0>,
+					     <3000 1>;
 		};
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
index 7a0614fd0c93..ea859f7ea042 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
@@ -265,42 +265,40 @@
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "internet";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "rgmii-id";
 				ethernet = <&eth0>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
index eb917462b219..0738eb679fcd 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
@@ -38,9 +38,9 @@
 		pinctrl-names = "default";
 		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
 			 &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
+		gpio-fan,speed-map = <0    0>,
+				     <3000 1>,
+				     <6000 2>;
 	};
 
 	gpio_poweroff {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-l-50.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
index dffb9f84e67c..c841eb8e7fb1 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -65,6 +65,7 @@
 			gpio2: gpio-expander@20 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x20>;
 
@@ -79,6 +80,7 @@
 			gpio3: gpio-expander@21 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x21>;
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
index 377b6e970259..dfac2045a1eb 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
@@ -118,10 +118,11 @@
 		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
 			 &gpio0 16 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 	};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
index c6024b569423..0425df8cb91c 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
@@ -69,10 +69,11 @@
 		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
 			 &gpio1 15 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
index 88b70ba1c8fe..f80af24b9e90 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
@@ -172,10 +172,11 @@
 		pinctrl-names = "default";
 		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
 		         &gpio0 18 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    3
-		                      1500 2
-		                      3250 1
-		                      5000 0>;
+		gpio-fan,speed-map =
+				<0    3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
index c0a087e77408..044958bc55da 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
@@ -29,15 +29,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 1500 15
-			 1700 14
-			 1800 13
-			 2100 12
-			 3100 11
-			 3300 10
-			 4300  9
-			 5500  8>;
+			<   0  0>,
+			<1500 15>,
+			<1700 14>,
+			<1800 13>,
+			<2100 12>,
+			<3100 11>,
+			<3300 10>,
+			<4300  9>,
+			<5500  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
index 5b9fa14b6428..3fbe008f9141 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
@@ -30,15 +30,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 3000 15
-			 3180 14
-			 4140 13
-			 4570 12
-			 6760 11
-			 7140 10
-			 7980  9
-			 9200  8>;
+			<   0  0>,
+			<3000 15>,
+			<3180 14>,
+			<4140 13>,
+			<4570 12>,
+			<6760 11>,
+			<7140 10>,
+			<7980  9>,
+			<9200  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
index 9b6666020cdd..20964eb48fd7 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
@@ -286,14 +286,15 @@
 		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-150-15-18 {
@@ -306,14 +307,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-100-32-35 {
@@ -326,14 +328,15 @@
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-18 {
@@ -346,14 +349,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-1 {
@@ -366,14 +370,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-3 {
@@ -388,14 +393,15 @@
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
 			       &gpio1 12 GPIO_ACTIVE_HIGH
 			       &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-leds-alarm-12 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
index e172029a0c4d..a260c42dbda3 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
@@ -50,10 +50,10 @@
 		pinctrl-names = "default";
 
 		gpio-fan,speed-map =
-			<0		3
-			1500	2
-			3250	1
-			5000	0>;
+			<   0 3>,
+			<1500 2>,
+			<3250 1>,
+			<5000 0>;
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts linux-libre-6.8-gnu/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
index 83372c1f291b..c6fbdd29019f 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
@@ -249,6 +249,8 @@
 
 	ethernet-phy@0 {
 		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -353,6 +355,7 @@
 				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
 				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
 				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
 				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
 				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
 		};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts linux-libre-6.8-gnu/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
index 5cd593028aff..f3cbb675cea4 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
@@ -292,6 +292,8 @@
 
 	ethernet-phy@0 {
 		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -465,6 +467,7 @@
 				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
 				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
 				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
 				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
 				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
 		};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts linux-libre-6.8-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
index d0a6dbd377df..f3ffb8f01d8a 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
@@ -54,7 +54,6 @@
 
 		sdmmc0: sdio-host@a0000000 {
 			bus-width = <8>;
-			mmc-ddr-3_3v;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts linux-libre-6.8-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
index e055b9e2fe34..15239834d886 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -197,7 +197,6 @@
 
 &sdmmc0 {
 	bus-width = <4>;
-	mmc-ddr-3_3v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
index fd671c7a1e5d..6e1f0f164cb4 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -120,6 +120,7 @@
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
 					     <3 IRQ_TYPE_LEVEL_HIGH>,
 					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
@@ -128,6 +129,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
index 16b374e6482f..8c1d5c9fa483 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
@@ -446,7 +446,7 @@
 	tegra_ac97: ac97@70002000 {
 		status = "okay";
 		nvidia,codec-reset-gpio =
-			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 		nvidia,codec-sync-gpio =
 			<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 	};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
index 1640763fd4af..ff0d684622f7 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
@@ -997,7 +997,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
index 3b6fad273cab..d38f1dd38a90 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
@@ -980,7 +980,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
index 4eb526fe9c55..81c8a5fd92cc 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
@@ -861,7 +861,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx1-ads.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
index 5833fb6f15d8..2c817c4a4c68 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
@@ -65,7 +65,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <4>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
index 1f11e9542a72..e66eef87a7a4 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
@@ -45,7 +45,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx1.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx1.dtsi
index e312f1e74e2f..1ac10965fdfd 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx1.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx1.dtsi
@@ -68,7 +68,7 @@
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi@200000 {
+		bus@200000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -155,7 +155,7 @@
 			};
 		};
 
-		aipi@210000 {
+		bus@210000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -268,9 +268,12 @@
 			status = "disabled";
 		};
 
-		esram: esram@300000 {
+		esram: sram@300000 {
 			compatible = "mmio-sram";
 			reg = <0x00300000 0x20000>;
+			ranges = <0 0x00300000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
index 0703f62d10d1..93a6e4e680b4 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
@@ -27,7 +27,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
index fc8a502fc957..6cddb2cc36fe 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&qvga_timings>;
-			qvga_timings: 320x240 {
+			qvga_timings: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index 80a7f96de4c6..64b2ffac463b 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_svga_timings>;
-			dvi_svga_timings: 800x600 {
+			dvi_svga_timings: timing0 {
 				clock-frequency = <40000000>;
 				hactive = <800>;
 				vactive = <600>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index 24027a1fb46d..fb074bfdaa8d 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_vga_timings>;
-			dvi_vga_timings: 640x480 {
+			dvi_vga_timings: timing0 {
 				clock-frequency = <31250000>;
 				hactive = <640>;
 				vactive = <480>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
index 04f4b127a172..dd176fb54e58 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
@@ -68,7 +68,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&wvga_timings>;
-			wvga_timings: 640x480 {
+			wvga_timings: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <45>;
@@ -122,6 +122,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks 129>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi
index 6fbb329636af..10aa7fa08fb6 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi
@@ -68,6 +68,16 @@
 		};
 	};
 
+	usbphy0: usb-phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usbphy1: usb-phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -93,7 +103,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f80000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <3>;
 				status = "disabled";
 			};
@@ -104,7 +114,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f84000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <10>;
 				status = "disabled";
 			};
@@ -151,7 +161,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f98000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <4>;
 				status = "disabled";
 			};
@@ -178,12 +188,9 @@
 			};
 
 			kpp: kpp@43fa8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
 				reg = <0x43fa8000 0x4000>;
 				clocks = <&clks 102>;
-				clock-names = "";
 				interrupts = <24>;
 				status = "disabled";
 			};
@@ -542,7 +549,7 @@
 			};
 
 			iim: efuse@53ff0000 {
-				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx25-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
 				clocks = <&clks 99>;
@@ -597,7 +604,7 @@
 			#size-cells = <1>;
 		};
 
-		emi@80000000 {
+		bus@80000000 {
 			compatible = "fsl,emi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -617,22 +624,4 @@
 			};
 		};
 	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usb-phy@0 {
-			reg = <0>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-
-		usbphy1: usb-phy@1 {
-			reg = <1>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-	};
 };
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
index a21f1f7c24b8..849306cb4532 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
@@ -16,7 +16,7 @@
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 800x480 {
+			timing0: timing0 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
 				vactive = <480>;
@@ -47,7 +47,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
index 74110bbcd9d4..c7e923584878 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
@@ -33,7 +33,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -90,7 +90,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
index 145e459625b3..d78793601306 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -16,7 +16,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
index 35123b7cb6b3..21d436972aa4 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
@@ -14,18 +14,12 @@
 		reg = <0xa0000000 0x08000000>;
 	};
 
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+
+	usbphy0: usbphy {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
index 25442eba21c1..27c93b9fe049 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
@@ -19,7 +19,7 @@
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 640x480 {
+			timing0: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <112>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
index 7f0cd4d3ec2d..b8048e12e3d9 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -19,7 +19,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 240x320 {
+			timing0: timing0 {
 				clock-frequency = <5500000>;
 				hactive = <240>;
 				vactive = <320>;
@@ -48,15 +48,12 @@
 		regulator-always-on;
 	};
 
-	usbphy {
-		usbphy2: usbphy@2 {
-			compatible = "usb-nop-xceiv";
-			reg = <2>;
-			vcc-supply = <&reg_5v0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+	usbphy2: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_5v0>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
index 7b2ea4cdae58..e958d7286ae9 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -29,19 +29,13 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			vcc-supply = <&sw3_reg>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+
+	usbphy0: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&sw3_reg>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
@@ -49,12 +43,12 @@
 	status = "okay";
 
 	/* SSI0 <=> PINS_4 (MC13783 Audio) */
-	ssi0 {
+	mux-ssi0 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <0xcb205000>;
 	};
 
-	pins4 {
+	mux-pins4 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <0x00001000>;
 	};
@@ -186,7 +180,7 @@
 		reg = <0x52>;
 	};
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -314,7 +308,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27.dtsi
index faba12ee7465..ec472695c71e 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx27.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx27.dtsi
@@ -81,7 +81,7 @@
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi1: aipi@10000000 { /* AIPI1 */
+		aipi1: bus@10000000 { /* AIPI1 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -453,7 +453,7 @@
 			};
 		};
 
-		aipi2: aipi@10020000 { /* AIPI2 */
+		aipi2: bus@10020000 { /* AIPI2 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -588,6 +588,9 @@
 		iram: sram@ffff4c00 {
 			compatible = "mmio-sram";
 			reg = <0xffff4c00 0xb400>;
+			ranges = <0 0xffff4c00 0xb400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
index 055d23a9aee7..0814f5665a59 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
@@ -22,7 +22,7 @@
 	};
 
 	display-0 {
-		#address-cells =<1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "fsl,imx-parallel-display";
 		interface-pix-fmt = "rgb24";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
index 7d4ae113c381..63cdf24eb397 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
@@ -22,7 +22,7 @@
 		compatible = "ilitek,ili251x";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
index 9c5938e16d99..2e75d700efdb 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
@@ -22,7 +22,7 @@
 		compatible = "ilitek,ili251x";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
index 01df7cffcef2..94625d5d5918 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h60";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
index a015453daf10..b3cfa8110ade 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h60";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
index b71ee6b79208..7edc788bcb8f 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h84";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		touchscreen-inverted-x;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
index 717decda0ceb..3ac7a4501620 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
@@ -76,6 +76,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can1_power>;
 		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_can2_supply: regulator-can2-supply {
@@ -85,6 +86,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can2_power>;
 		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
index db8c332df6a1..cad112e05475 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
@@ -227,7 +227,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 
 		bridge@2,1 {
 			compatible = "pci10b5,8605";
@@ -235,7 +234,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			ethernet@3,0 {
@@ -250,7 +248,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			switch_nic: ethernet@4,0 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
index 99f4f6ac71d4..c1ae7c47b442 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
@@ -245,6 +245,7 @@
 				reg = <0x74>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupt-parent = <&gpio2>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -390,7 +391,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
index 6f9d094dd6d0..18a620832a2a 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
@@ -16,7 +16,7 @@
 	compatible = "variscite,mx6customboard", "variscite,var-som-imx6q", "fsl,imx6q";
 
 	panel0: lvds-panel0 {
-		compatible =  "panel-lvds";
+		compatible = "panel-lvds";
 		backlight = <&backlight_lvds>;
 		width-mm = <152>;
 		height-mm = <91>;
@@ -43,7 +43,7 @@
 	};
 
 	panel1: lvds-panel1 {
-		compatible =  "panel-lvds";
+		compatible = "panel-lvds";
 		width-mm = <152>;
 		height-mm = <91>;
 		data-mapping = "jeida-18";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index 4cc965277c52..ea40623d12e5 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -12,6 +12,13 @@
 	model = "Toradex Apalis iMX6Q/D Module";
 	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
 
+	aliases {
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC1 slot */
+		mmc2 = &usdhc2; /* SD1 slot */
+		/delete-property/ mmc3;
+	};
+
 	/* Will be filled by the bootloader */
 	memory@10000000 {
 		device_type = "memory";
@@ -166,7 +173,7 @@
 	reg_usb_host_vbus: regulator-usb-host-vbus {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
 		regulator-max-microvolt = <5000000>;
@@ -619,7 +626,6 @@
 		blocks = <0x5>;
 		id = <0>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 		interrupt-parent = <&gpio4>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
index 11d9c7a2dacb..d3a7a6eeb8e0 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -12,6 +12,13 @@
 	model = "Toradex Colibri iMX6DL/S Module";
 	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
 
+	aliases {
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC/SD Slot */
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		brightness-levels = <0 45 63 88 119 158 203 255>;
@@ -543,7 +550,6 @@
 		blocks = <0x5>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio6>;
-		interrupt-controller;
 		id = <0>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
index f1a41c76729c..5587069b6052 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
@@ -54,7 +54,7 @@
 	clk_codec: clock-codec {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency  = <12000000>;
+		clock-frequency = <12000000>;
 	};
 
 	sound {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index a63e73adc1fc..42b2ba23aefc 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -225,7 +225,6 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
index da0f8dae1ea8..4d2abcd44eff 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
@@ -500,21 +500,21 @@
 
 	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
 		>;
 	};
 
 	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
 		>;
 	};
 
 	pinctrl_pwm4: pwm4grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
 		>;
 	};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
index 113974520d54..c0c47adc5866 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
@@ -124,6 +124,7 @@
 		reg = <0x58>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+		#interrupt-cells = <2>;
 		interrupt-controller;
 
 		regulators {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
index 86b4269e0e01..85e278eb2016 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
@@ -100,6 +100,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
index b81799d7076a..596b3bb3ddd1 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
@@ -25,7 +25,7 @@
 		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
 		pinctrl-0 = <&pinctrl_touch>;
-		pinctrl-names ="default";
+		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
 		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
 		#io-channel-cells = <1>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
index 603e023d5637..91844d4ee7b2 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
@@ -475,7 +475,7 @@
 						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 							"txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
index 8722efe8b19b..68c1fc9f7add 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
@@ -418,7 +418,7 @@
 					       <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
@@ -1010,7 +1010,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -1024,7 +1024,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -1038,7 +1038,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
index e4e0d320d760..8914a0be2b25 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
@@ -364,7 +364,7 @@
 						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
index 44cc4ff1d0df..d12fb44aeb14 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
@@ -116,7 +116,7 @@
 	tpm_tis: tpm@1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tpm>;
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <1>;
 		spi-max-frequency = <20000000>;
 		interrupt-parent = <&gpio5>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index fe42b0a46831..3fc3130f9def 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -128,11 +128,16 @@
 		};
 	};
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
+	/* LM75A temperature sensor, TQMa7x 01xx */
+	lm75a: temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+	};
+
+	/* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
 	se97b: temperature-sensor-eeprom@1e {
 		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1e>;
-		status = "okay";
 	};
 
 	/* ST M24C64 */
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
index 3740e34ef99f..9670f45eab3b 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
@@ -11,6 +11,10 @@
 		/* Required to properly pass MAC addresses from bootloader. */
 		ethernet0 = &fec1;
 		ethernet1 = &fec2;
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC/SD slot */
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	memory@80000000 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
index 3a723843d562..9984b343cdf0 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
@@ -130,7 +130,7 @@
 	 * TCG specification - Section 6.4.1 Clocking:
 	 * TPM shall support a SPI clock frequency range of 10-24 MHz.
 	 */
-	st33htph: tpm-tis@0 {
+	st33htph: tpm@0 {
 		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <24000000>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
index dd8003bd1fc0..f0fda15f3020 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
@@ -212,7 +212,7 @@
 	keep-power-in-suspend;
 	wakeup-source;
 	vmmc-supply = <&reg_wlreg_on>;
-	vqmmc-supply =<&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
 	status = "okay";
 
 	brcmf: wifi@1 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
index 12361fcbe24a..1b965652291b 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
@@ -63,6 +63,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
+		interrupt-controller;
 		reg = <0x25>;
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
index c5eefe89cd99..8d5037ac03c7 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
@@ -108,6 +108,14 @@
 	assigned-clock-rates = <0>, <32768>;
 };
 
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
 &ecspi3 {
 	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
index 85b97b5f64e7..7ed27c7ad726 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
@@ -149,7 +149,7 @@
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 =<&pinctrl_i2c2>;
+	pinctrl-0 = <&pinctrl_i2c2>;
 	clock-frequency = <100000>;
 	status = "okay";
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
index 4b94b8afb55d..0484e349e064 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
@@ -217,9 +217,6 @@
 };
 
 &ca_funnel_in_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
 	port@1 {
 		reg = <1>;
 		ca_funnel_in_port1: endpoint {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
index ecc3330d7eef..25ae7368d4a2 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -183,6 +183,15 @@
 		interrupt-parent = <&gpc>;
 		ranges;
 
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX7D_OCRAM_CLK>;
+		};
+
 		funnel@30041000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x30041000 0x1000>;
@@ -190,7 +199,11 @@
 			clock-names = "apb_pclk";
 
 			ca_funnel_in_ports: in-ports {
-				port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
 					ca_funnel_in_port0: endpoint {
 						remote-endpoint = <&etm0_out_port>;
 					};
@@ -605,6 +618,7 @@
 					nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -720,6 +734,8 @@
 				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
 					<&clks IMX7D_ECSPI4_ROOT_CLK>;
 				clock-names = "ipg", "per";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 6 7 1>, <&sdma 7 7 2>;
 				status = "disabled";
 			};
 
@@ -811,7 +827,7 @@
 			};
 
 			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x30730000 0x10000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
@@ -850,6 +866,26 @@
 					};
 				};
 			};
+
+			mipi_dsi: dsi@30760000 {
+				compatible = "fsl,imx7d-mipi-dsim", "fsl,imx8mm-mipi-dsim";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30760000 0x400>;
+				clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>,
+					 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clks IMX7D_MIPI_DSI_ROOT_SRC>,
+						  <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+				assigned-clock-parents = <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+				assigned-clock-rates = <0>, <333000000>;
+				power-domains = <&pgc_mipi_phy>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				samsung,burst-clock-frequency = <891000000>;
+				samsung,esc-clock-frequency = <20000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				status = "disabled";
+			};
 		};
 
 		aips3: bus@30800000 {
@@ -875,6 +911,8 @@
 					clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
 						<&clks IMX7D_ECSPI1_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 0 7 1>, <&sdma 1 7 2>;
 					status = "disabled";
 				};
 
@@ -887,6 +925,8 @@
 					clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
 						<&clks IMX7D_ECSPI2_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 2 7 1>, <&sdma 3 7 2>;
 					status = "disabled";
 				};
 
@@ -899,6 +939,8 @@
 					clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
 						<&clks IMX7D_ECSPI3_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 4 7 1>, <&sdma 5 7 2>;
 					status = "disabled";
 				};
 
@@ -1275,7 +1317,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
index 5a8b867d7d79..e78d0a7d8cd2 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
@@ -467,7 +467,7 @@
 
 	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6UL_PAD_GPIO1_IO09__PWM2_OUT		0x00003050
 		>;
 	};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
index 9cf09c183b85..6dd73290f0c6 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
@@ -74,7 +74,7 @@
 		sct_pwm: pwm@40000000 {
 			compatible = "nxp,lpc1850-sct-pwm";
 			reg = <0x40000000 0x1000>;
-			clocks =<&ccu1 CLK_CPU_SCT>;
+			clocks = <&ccu1 CLK_CPU_SCT>;
 			clock-names = "pwm";
 			resets = <&rgu 37>;
 			#pwm-cells = <3>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
index 49c78c84cd5d..d471cc5efa94 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
@@ -112,7 +112,7 @@
 			compatible = "fsl,ls1021a-msi";
 			reg = <0x0 0x1570e00 0x0 0x8>;
 			msi-controller;
-			interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi2: msi-controller@1570e08 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
index 636cf09a2b37..b23e7ada9c80 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
@@ -175,10 +175,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio1 24 0		/* SDA */
-			&gpio1 22 0		/* SCL */
-		>;
+		sda-gpios = <&gpio1 24 0>;
+		scl-gpios = <&gpio1 22 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 
@@ -186,10 +184,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio0 31 0		/* SDA */
-			&gpio0 30 0		/* SCL */
-		>;
+		sda-gpios = <&gpio0 31 0>;
+		scl-gpios = <&gpio0 30 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 
 		touch: touch@20 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/mxs/imx23.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
index fdf18b7cb2f6..0309592af1e1 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
@@ -110,7 +110,7 @@
 				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <0>;
 					interrupts = <16>;
 					gpio-controller;
@@ -120,7 +120,7 @@
 				};
 
 				gpio1: gpio@1 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <1>;
 					interrupts = <17>;
 					gpio-controller;
@@ -130,7 +130,7 @@
 				};
 
 				gpio2: gpio@2 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <2>;
 					interrupts = <18>;
 					gpio-controller;
@@ -412,7 +412,7 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <7>, <5>, <9>, <26>,
@@ -484,7 +484,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
+				compatible = "fsl,imx23-clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
index bb971e660db8..69fcb0dde940 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
@@ -18,6 +18,7 @@
 
 	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
+		device_type = "memory";
 	};
 
 	reg_3v3: regulator-reg-3v3 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
index 153e4017951d..5485fe118dc4 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
@@ -260,6 +260,7 @@
 	sgtl5000: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 		clocks = <&mclk>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/mxs/imx28.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index 6932d23fb29d..4817fba2d938 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -164,7 +164,7 @@
 				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <0>;
 					interrupts = <127>;
 					gpio-controller;
@@ -174,7 +174,7 @@
 				};
 
 				gpio1: gpio@1 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <1>;
 					interrupts = <126>;
 					gpio-controller;
@@ -184,7 +184,7 @@
 				};
 
 				gpio2: gpio@2 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <2>;
 					interrupts = <125>;
 					gpio-controller;
@@ -194,7 +194,7 @@
 				};
 
 				gpio3: gpio@3 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <3>;
 					interrupts = <124>;
 					gpio-controller;
@@ -204,7 +204,7 @@
 				};
 
 				gpio4: gpio@4 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <4>;
 					interrupts = <123>;
 					gpio-controller;
@@ -990,7 +990,7 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <78>, <79>, <66>, <0>,
@@ -1100,7 +1100,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+				compatible = "fsl,imx28-clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
index 14c411f146f5..5a19da9313ae 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
@@ -55,7 +55,7 @@
 	brightness-levels = <0 4 8 16 32 64 128 255>;
 	default-brightness-level = <6>;
 	power-supply = <&reg_3v3>;
-	status  = "okay";
+	status = "okay";
 };
 
 &dcu0 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
index e4f691d601cc..722182f5fd17 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
@@ -68,7 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* PTD12 ->RPIO[91] */
-		sck-gpios  = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
 		/* PTD10 ->RPIO[89] */
 		miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <0>;
@@ -79,7 +79,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			/* PTB18 -> RGPIO[40] */
-			load-gpios  = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			spi-max-frequency = <100000>;
 		};
 	};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
index 1a19aec8957b..7e72f860c3c5 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
@@ -162,7 +162,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6085";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_switch>;
@@ -173,26 +173,26 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_fc_1000_1";
 					phy-mode = "1000base-x";
@@ -200,7 +200,7 @@
 					sfp = <&sff>;
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
index 16b4e06c4efa..029f49be40e3 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -294,11 +294,11 @@
 		pinctrl-names = "default";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		sck-gpios  = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		cs-gpios  = <&gpio1  9 GPIO_ACTIVE_LOW
-			     &gpio1  8 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW
+			    &gpio1 8 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <2>;
 
 		flash@0 {
@@ -338,6 +338,7 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
index df1335492a19..77492eeea450 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
@@ -47,17 +47,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0: switch0@0 {
+			switch0: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 0>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
+					ethernet-port@0 {
 						reg = <0>;
 						phy-mode = "rmii";
 						ethernet = <&fec1>;
@@ -68,37 +68,37 @@
 						};
 					};
 
-					port@1 {
+					ethernet-port@1 {
 						reg = <1>;
 						label = "aib2main_1";
 					};
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "aib2main_2";
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_cu_1000_5";
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_cu_1000_6";
 					};
 
-					port@5 {
+					ethernet-port@5 {
 						reg = <5>;
 						label = "eth_cu_1000_4";
 					};
 
-					port@6 {
+					ethernet-port@6 {
 						reg = <6>;
 						label = "eth_cu_1000_7";
 					};
 
-					port@7 {
+					ethernet-port@7 {
 						reg = <7>;
 						label = "modem_pic";
 
@@ -108,7 +108,7 @@
 						};
 					};
 
-					switch0port10: port@10 {
+					switch0port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
@@ -130,32 +130,32 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1: switch1@0 {
+			switch1: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 1>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@1 {
+					ethernet-port@1 {
 						reg = <1>;
 						label = "eth_cu_1000_3";
 					};
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_cu_100_2";
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_cu_100_3";
 					};
 
-					switch1port9: port@9 {
+					switch1port9: ethernet-port@9 {
 						reg = <9>;
 						label = "dsa";
 						phy-mode = "xgmii";
@@ -168,7 +168,7 @@
 						};
 					};
 
-					switch1port10: port@10 {
+					switch1port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
@@ -188,17 +188,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2: switch2@0 {
+			switch2: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 2>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_2";
 						phy-mode = "1000base-x";
@@ -206,7 +206,7 @@
 						sfp = <&sff1>;
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_3";
 						phy-mode = "1000base-x";
@@ -214,7 +214,7 @@
 						sfp = <&sff2>;
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_4";
 						phy-mode = "1000base-x";
@@ -222,7 +222,7 @@
 						sfp = <&sff3>;
 					};
 
-					port@5 {
+					ethernet-port@5 {
 						reg = <5>;
 						label = "eth_fc_1000_5";
 						phy-mode = "1000base-x";
@@ -230,7 +230,7 @@
 						sfp = <&sff4>;
 					};
 
-					port@6 {
+					ethernet-port@6 {
 						reg = <6>;
 						label = "eth_fc_1000_6";
 						phy-mode = "1000base-x";
@@ -238,7 +238,7 @@
 						sfp = <&sff5>;
 					};
 
-					port@7 {
+					ethernet-port@7 {
 						reg = <7>;
 						label = "eth_fc_1000_7";
 						phy-mode = "1000base-x";
@@ -246,7 +246,7 @@
 						sfp = <&sff6>;
 					};
 
-					port@9 {
+					ethernet-port@9 {
 						reg = <9>;
 						label = "eth_fc_1000_1";
 						phy-mode = "1000base-x";
@@ -254,7 +254,7 @@
 						sfp = <&sff0>;
 					};
 
-					switch2port10: port@10 {
+					switch2port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "2500base-x";
@@ -276,17 +276,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch3: switch3@0 {
+			switch3: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 3>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_8";
 						phy-mode = "1000base-x";
@@ -294,7 +294,7 @@
 						sfp = <&sff7>;
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_9";
 						phy-mode = "1000base-x";
@@ -302,7 +302,7 @@
 						sfp = <&sff8>;
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_10";
 						phy-mode = "1000base-x";
@@ -310,7 +310,7 @@
 						sfp = <&sff9>;
 					};
 
-					switch3port9: port@9 {
+					switch3port9: ethernet-port@9 {
 						reg = <9>;
 						label = "dsa";
 						phy-mode = "2500base-x";
@@ -322,7 +322,7 @@
 						};
 					};
 
-					switch3port10: port@10 {
+					switch3port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
index 1461804ecaea..2a490464660c 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
@@ -123,7 +123,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -134,11 +134,11 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
@@ -149,32 +149,32 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@4 {
+				ethernet-port@4 {
 					reg = <4>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_6";
 				};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
index 463c2452b9b7..078d8699e16d 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
@@ -112,7 +112,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -123,11 +123,11 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
@@ -138,27 +138,27 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_100_3";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@8 {
+				ethernet-port@8 {
 					reg = <8>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@9 {
+				ethernet-port@9 {
 					reg = <9>;
 					label = "eth_cu_1000_2";
 					phy-handle = <&phy9>;
@@ -167,12 +167,12 @@
 				};
 			};
 
-			mdio1 {
+			mdio-external {
 				compatible = "marvell,mv88e6xxx-mdio-external";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				phy9: phy9@0 {
+				phy9: ethernet-phy@0 {
 					compatible = "ethernet-phy-ieee802.3-c45";
 					pinctrl-0 = <&pinctrl_gpio_phy9>;
 					pinctrl-names = "default";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
index f5ae0d5de315..22c8f44390a9 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
@@ -137,7 +137,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -148,11 +148,11 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
@@ -163,32 +163,32 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@4 {
+				ethernet-port@4 {
 					reg = <4>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_6";
 				};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/Makefile linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/Makefile
index 3dfb1c8cefb8..9cc1e14e6cd0 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/Makefile
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/Makefile
@@ -23,12 +23,19 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq4019-ap.dk07.1-c2.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-ipq8064-rb3011.dtb \
+	qcom-msm8226-microsoft-dempsey.dtb \
+	qcom-msm8226-microsoft-makepeace.dtb \
+	qcom-msm8226-microsoft-moneypenny.dtb \
 	qcom-msm8226-samsung-s3ve3g.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8916-samsung-e5.dtb \
 	qcom-msm8916-samsung-e7.dtb \
 	qcom-msm8916-samsung-grandmax.dtb \
 	qcom-msm8916-samsung-serranove.dtb \
+	qcom-msm8926-htc-memul.dtb \
+	qcom-msm8926-microsoft-superman-lte.dtb \
+	qcom-msm8926-microsoft-tesla.dtb \
+	qcom-msm8926-motorola-peregrine.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8960-samsung-expressatt.dtb \
 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/pm8018.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pm8018.dtsi
new file mode 100644
index 000000000000..22f3c7bac522
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pm8018.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Qualcomm PM8018
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+&ssbi {
+	pm8018: pmic {
+		compatible = "qcom,pm8018", "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8018-pwrkey",
+				     "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8018 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8018 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8018_mpps: mpps@50 {
+			compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+			reg = <0x50>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8018_mpps 0 0 6>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts-extended = <&pm8018 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pm8018_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8018_gpio 0 0 6>;
+			#gpio-cells = <2>;
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/pm8058.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pm8058.dtsi
new file mode 100644
index 000000000000..984b79777984
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pm8058.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+	pm8058: pmic {
+		compatible = "qcom,pm8058";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8058-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8058 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8058 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8058_led48: led@48 {
+			compatible = "qcom,pm8058-keypad-led";
+			reg = <0x48>;
+			status = "disabled";
+		};
+
+		vibrator@4a {
+			compatible = "qcom,pm8058-vib";
+			reg = <0x4a>;
+		};
+
+		pm8058_mpps: mpps@50 {
+			compatible = "qcom,pm8058-mpp",
+				     "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8058_mpps 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8058_led131: led@131 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x131>;
+			status = "disabled";
+		};
+
+		pm8058_led132: led@132 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x132>;
+			status = "disabled";
+		};
+
+		pm8058_led133: led@133 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x133>;
+			status = "disabled";
+		};
+
+		pm8058_keypad: keypad@148 {
+			compatible = "qcom,pm8058-keypad";
+			reg = <0x148>;
+			interrupts-extended = <&pm8058 74 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8058 75 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15>;
+			scan-delay = <32>;
+			row-hold = <91500>;
+		};
+
+		pm8058_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8058_gpio 0 0 44>;
+			#gpio-cells = <2>;
+		};
+
+		pm8058_xoadc: xoadc@197 {
+			compatible = "qcom,pm8058-adc";
+			reg = <0x197>;
+			interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#io-channel-cells = <2>;
+
+			vcoin: adc-channel@0 {
+				reg = <0x00 0x00>;
+			};
+
+			vbat: adc-channel@1 {
+				reg = <0x00 0x01>;
+			};
+
+			dcin: adc-channel@2 {
+				reg = <0x00 0x02>;
+			};
+
+			ichg: adc-channel@3 {
+				reg = <0x00 0x03>;
+			};
+
+			vph_pwr: adc-channel@4 {
+				reg = <0x00 0x04>;
+			};
+
+			usb_vbus: adc-channel@a {
+				reg = <0x00 0x0a>;
+			};
+
+			die_temp: adc-channel@b {
+				reg = <0x00 0x0b>;
+			};
+
+			ref_625mv: adc-channel@c {
+				reg = <0x00 0x0c>;
+			};
+
+			ref_1250mv: adc-channel@d {
+				reg = <0x00 0x0d>;
+			};
+
+			ref_325mv: adc-channel@e {
+				reg = <0x00 0x0e>;
+			};
+
+			ref_muxoff: adc-channel@f {
+				reg = <0x00 0x0f>;
+			};
+		};
+
+		rtc@1e8 {
+			compatible = "qcom,pm8058-rtc";
+			reg = <0x1e8>;
+			interrupts-extended = <&pm8058 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+	};
+};
+
+/ {
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pm8226.dtsi
similarity index 99%
rename from arch/arm/boot/dts/qcom/qcom-pm8226.dtsi
rename to arch/arm/boot/dts/qcom/pm8226.dtsi
index 2413778f3715..2fd4f135ed84 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pm8226.dtsi
@@ -82,6 +82,8 @@
 					  "usb-valid",
 					  "dc-valid";
 
+			status = "disabled";
+
 			chg_otg: otg-vbus { };
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/pm8821.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pm8821.dtsi
new file mode 100644
index 000000000000..064e3ba54e18
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pm8821.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This PMIC is used on a secondary SSBI bus */
+&ssbi2 {
+	pm8821: pmic {
+		compatible = "qcom,pm8821";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8821_mpps: mpps@50 {
+			compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8821_mpps 0 0 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-pm8841.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pm8841.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pm8841.dtsi
rename to arch/arm/boot/dts/qcom/pm8841.dtsi
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/pm8921.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pm8921.dtsi
new file mode 100644
index 000000000000..058962af3005
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+	pm8921: pmic {
+		compatible = "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8921 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8921_mpps: mpps@50 {
+			compatible = "qcom,pm8921-mpp",
+				     "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8921_mpps 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pm8921_keypad: keypad@148 {
+			compatible = "qcom,pm8921-keypad";
+			reg = <0x148>;
+			interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8921 75 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15>;
+			scan-delay = <32>;
+			row-hold = <91500>;
+			status = "disabled";
+		};
+
+		pm8921_gpio: gpio@150 {
+
+			compatible = "qcom,pm8921-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8921_gpio 0 0 44>;
+			#gpio-cells = <2>;
+
+		};
+
+		pm8921_xoadc: xoadc@197 {
+			compatible = "qcom,pm8921-adc";
+			reg = <0x197>;
+			interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#io-channel-cells = <2>;
+
+			vcoin: adc-channel@0 {
+				reg = <0x00 0x00>;
+			};
+
+			vbat: adc-channel@1 {
+				reg = <0x00 0x01>;
+			};
+
+			dcin: adc-channel@2 {
+				reg = <0x00 0x02>;
+			};
+
+			vph_pwr: adc-channel@4 {
+				reg = <0x00 0x04>;
+			};
+
+			batt_therm: adc-channel@8 {
+				reg = <0x00 0x08>;
+			};
+
+			batt_id: adc-channel@9 {
+				reg = <0x00 0x09>;
+			};
+
+			usb_vbus: adc-channel@a {
+				reg = <0x00 0x0a>;
+			};
+
+			die_temp: adc-channel@b {
+				reg = <0x00 0x0b>;
+			};
+
+			ref_625mv: adc-channel@c {
+				reg = <0x00 0x0c>;
+			};
+
+			ref_1250mv: adc-channel@d {
+				reg = <0x00 0x0d>;
+			};
+
+			chg_temp: adc-channel@e {
+				reg = <0x00 0x0e>;
+			};
+
+			ref_muxoff: adc-channel@f {
+				reg = <0x00 0x0f>;
+			};
+		};
+	};
+};
+
+/ {
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pm8941.dtsi
similarity index 99%
rename from arch/arm/boot/dts/qcom/qcom-pm8941.dtsi
rename to arch/arm/boot/dts/qcom/pm8941.dtsi
index ed0ba591c755..aca0052a02b7 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pm8941.dtsi
@@ -99,6 +99,8 @@
 
 			usb-otg-in-supply = <&pm8941_5vs1>;
 
+			status = "disabled";
+
 			chg_otg: otg-vbus { };
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-pma8084.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pma8084.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pma8084.dtsi
rename to arch/arm/boot/dts/qcom/pma8084.dtsi
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-pmx55.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pmx55.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pmx55.dtsi
rename to arch/arm/boot/dts/qcom/pmx55.dtsi
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-pmx65.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/pmx65.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pmx65.dtsi
rename to arch/arm/boot/dts/qcom/pmx65.dtsi
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
index aa0e0e8d2a97..a2ca456012f1 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
@@ -253,6 +253,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4400000>;
 	qcom,auto-recharge-threshold-voltage = <4300000>;
 	qcom,minimum-input-voltage = <4400000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
index de19640efe55..ac228965a485 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 #include <dt-bindings/input/ti-drv260x.h>
 
 /delete-node/ &adsp_region;
@@ -335,6 +335,8 @@
 	qcom,fast-charge-current-limit = <300000>;
 	qcom,fast-charge-safe-current = <600000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
index b887e5361ec3..0a1fd5eb3c6d 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
@@ -292,6 +292,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4350000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
 	qcom,minimum-input-voltage = <4450000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
index f516e0426bb9..cffc069712b2 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -7,7 +7,7 @@
 
 #include <dt-bindings/input/input.h>
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 /delete-node/ &smem_region;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 569cbf0d8df8..009afd8212c2 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -5,6 +5,7 @@
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 #include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
 
 / {
 	model = "Qualcomm APQ8060 Dragonboard";
@@ -71,7 +72,7 @@
 		/* Trig on both edges - getting close or far away */
 		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
 		/* MPP05 analog input to the XOADC */
-		io-channels = <&xoadc 0x00 0x05>;
+		io-channels = <&pm8058_xoadc 0x00 0x05>;
 		io-channel-names = "aout";
 		pinctrl-names = "default";
 		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
@@ -272,6 +273,10 @@
 	};
 };
 
+&pm8058 {
+	interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8058_gpio {
 	dragon_ethernet_gpios: ethernet-state {
 		pinconf {
@@ -447,6 +452,8 @@
 	 * that means
 	 */
 	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+
 		vdd_l0-supply = <&pm8901_s4>;
 		vdd_l1-supply = <&vph>;
 		vdd_l2-supply = <&vph>;
@@ -464,57 +471,63 @@
 		lvs3_in-supply = <&pm8058_s2>;
 		mvs_in-supply = <&pm8058_s3>;
 
-		l0 {
+		pm8901_l0: l0 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l1 {
+
+		pm8901_l1: l1 {
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l2 {
+
+		pm8901_l2: l2 {
 			/* TMA340 requires strictly 3.3V */
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l3 {
+
+		pm8901_l3: l3 {
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l4 {
+
+		pm8901_l4: l4 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l5 {
+
+		pm8901_l5: l5 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l6 {
+
+		pm8901_l6: l6 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			bias-pull-down;
 		};
 
 		/* s0 and s1 are SAW regulators controlled over SPM */
-		s2 {
+		pm8901_s2: s2 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s3 {
+		pm8901_s3: s3 {
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s4 {
+		pm8901_s4: s4 {
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -522,17 +535,22 @@
 		};
 
 		/* LVS0 thru 3 and mvs are just switches */
-		lvs0 {
+		pm8901_lvs0: lvs0 {
 			regulator-always-on;
 		};
-		lvs1 { };
-		lvs2 { };
-		lvs3 { };
-		mvs { };
 
+		pm8901_lvs1: lvs1 { };
+
+		pm8901_lvs2: lvs2 { };
+
+		pm8901_lvs3: lvs3 { };
+
+		pm8901_mvs: mvs { };
 	};
 
 	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
+
 		vdd_l0_l1_lvs-supply = <&pm8058_s3>;
 		vdd_l2_l11_l12-supply = <&vph>;
 		vdd_l3_l4_l5-supply = <&vph>;
@@ -554,144 +572,169 @@
 		vdd_s4-supply = <&vph>;
 		vdd_ncp-supply = <&vph>;
 
-		l0 {
+		pm8058_l0: l0 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l1 {
+
+		pm8058_l1: l1 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l2 {
+
+		pm8058_l2: l2 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l3 {
+
+		pm8058_l3: l3 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l4 {
+
+		pm8058_l4: l4 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l5 {
+
+		pm8058_l5: l5 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l6 {
+
+		pm8058_l6: l6 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3600000>;
 			bias-pull-down;
 		};
-		l7 {
+
+		pm8058_l7: l7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l8 {
+
+		pm8058_l8: l8 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <3050000>;
 			bias-pull-down;
 		};
-		l9 {
+
+		pm8058_l9: l9 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l10 {
+
+		pm8058_l10: l10 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l11 {
+
+		pm8058_l11: l11 {
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
 			bias-pull-down;
 		};
-		l12 {
+
+		pm8058_l12: l12 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 			bias-pull-down;
 		};
-		l13 {
+
+		pm8058_l13: l13 {
 			regulator-min-microvolt = <2050000>;
 			regulator-max-microvolt = <2050000>;
 			bias-pull-down;
 		};
-		l14 {
+
+		pm8058_l14: l14 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 		};
-		l15 {
+
+		pm8058_l15: l15 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l16 {
+
+		pm8058_l16: l16 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 			regulator-always-on;
 		};
-		l17 {
+
+		pm8058_l17: l17 {
 			// 1.5V according to schematic
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l18 {
+
+		pm8058_l18: l18 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			bias-pull-down;
 		};
-		l19 {
+
+		pm8058_l19: l19 {
 			regulator-min-microvolt = <2500000>;
 			regulator-max-microvolt = <2500000>;
 			bias-pull-down;
 		};
-		l20 {
+
+		pm8058_l20: l20 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l21 {
+
+		pm8058_l21: l21 {
 			// 1.1 V according to schematic
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 			regulator-always-on;
 		};
-		l22 {
+
+		pm8058_l22: l22 {
 			// 1.2 V according to schematic
 			regulator-min-microvolt = <1150000>;
 			regulator-max-microvolt = <1150000>;
 			bias-pull-down;
 		};
-		l23 {
+
+		pm8058_l23: l23 {
 			// Unused
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l24 {
+
+		pm8058_l24: l24 {
 			// Unused
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l25 {
+
+		pm8058_l25: l25 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		s0 {
+		pm8058_s0: s0 {
 			// regulator-min-microvolt = <500000>;
 			// regulator-max-microvolt = <1325000>;
 			regulator-min-microvolt = <1100000>;
@@ -699,7 +742,8 @@
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s1 {
+
+		pm8058_s1: s1 {
 			// regulator-min-microvolt = <500000>;
 			// regulator-max-microvolt = <1250000>;
 			regulator-min-microvolt = <1100000>;
@@ -707,21 +751,24 @@
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s2 {
+
+		pm8058_s2: s2 {
 			// 1.3 V according to schematic
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s3 {
+
+		pm8058_s3: s3 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
 			regulator-always-on;
 			bias-pull-down;
 		};
-		s4 {
+
+		pm8058_s4: s4 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -730,14 +777,15 @@
 		};
 
 		/* LVS0 and LVS1 are just switches */
-		lvs0 {
+		pm8058_lvs0: lvs0 {
 			bias-pull-down;
 		};
-		lvs1 {
+
+		pm8058_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		ncp {
+		pm8058_ncp: ncp {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -944,28 +992,32 @@
 	};
 };
 
-&xoadc {
+&pm8058_xoadc {
 	/* Reference voltage 2.2 V */
 	xoadc-ref-supply = <&pm8058_l18>;
 
 	/* Board-specific channels */
-	mpp5@5 {
+	adc-channel@5 {
 		/* Connected to AOUT of ALS sensor */
 		reg = <0x00 0x05>;
 	};
-	mpp6@6 {
+
+	adc-channel@6 {
 		/* Connected to test point TP43 */
 		reg = <0x00 0x06>;
 	};
-	mpp7@7 {
+
+	adc-channel@7 {
 		/* Connected to battery thermistor */
 		reg = <0x00 0x07>;
 	};
-	mpp8@8 {
+
+	adc-channel@8 {
 		/* Connected to battery ID detector */
 		reg = <0x00 0x08>;
 	};
-	mpp9@9 {
+
+	adc-channel@9 {
 		/* Connected to XO thermistor */
 		reg = <0x00 0x09>;
 	};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index c0dd6399f597..d460743fbb94 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -1,8 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Asus Nexus7(flo)";
 	compatible = "asus,nexus7-flo", "qcom,apq8064";
@@ -180,24 +184,26 @@
 	status = "okay";
 };
 
-/* eMMC */
-&sdcc1 {
-	vmmc-supply = <&pm8921_l5>;
-	vqmmc-supply = <&pm8921_s4>;
-	status = "okay";
-};
-
 &mdp_dsi1_out {
 	remote-endpoint = <&dsi0_in>;
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
 
-
 		vdd_l24-supply = <&pm8921_s1>;
 		vdd_l25-supply = <&pm8921_s1>;
 		vin_lvs2-supply = <&pm8921_s1>;
@@ -209,7 +215,7 @@
 		vdd_ncp-supply = <&pm8921_l6>;
 
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -218,7 +224,7 @@
 		};
 
 		/* msm otg HSUSB_VDDCX */
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <500000>;
 			regulator-max-microvolt = <1150000>;
 			qcom,switch-mode-frequency = <4800000>;
@@ -231,55 +237,58 @@
 		 * tabla2x-slim-CDC_VDD_CP
 		 * tabla2x-slim-VDDIO_CDC
 		 */
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 			regulator-always-on;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
 		/* mipi_dsi.1-dsi1_pll_vdda */
-		l2 {
+		pm8921_l2: l2 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-always-on;
 		};
 
 		/* msm_otg-HSUSB_3p3 */
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3075000>;
 			regulator-max-microvolt = <3075000>;
 			bias-pull-down;
 		};
 
 		/* msm_otg-HSUSB_1p8 */
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
 		/* msm_sdcc.1-sdc_vdd */
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			regulator-always-on;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 		};
 
+		pm8921_l8: l8 {
+		};
+
 		/* mipi_dsi.1-dsi1_avdd */
-		l11 {
+		pm8921_l11: l11 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
@@ -287,14 +296,14 @@
 		};
 
 		/* pwm_power for backlight */
-		l17 {
+		pm8921_l17: l17 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			regulator-always-on;
 		};
 
 		/* camera, qdsp6 */
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
@@ -304,37 +313,44 @@
 		 * tabla2x-slim-CDC_VDDA_A_1P2V
 		 * tabla2x-slim-VDDD_CDC_D
 		 */
-		l25 {
+		pm8921_l25: l25 {
 			regulator-min-microvolt = <1250000>;
 			regulator-max-microvolt = <1250000>;
 			bias-pull-down;
 		};
 
-		lvs1 {
+		pm8921_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		lvs4 {
+		pm8921_lvs4: lvs4 {
 			bias-pull-down;
 		};
 
-		lvs5 {
+		pm8921_lvs5: lvs5 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 		/*
 		 * mipi_dsi.1-dsi1_vddio
 		 * pil_riva-pll_vdd
 		 */
-		lvs7 {
+		pm8921_lvs7: lvs7 {
 			bias-pull-down;
 		};
 	};
 };
 
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
 &usb_hs1_phy {
 	v3p3-supply = <&pm8921_l3>;
 	v1p8-supply = <&pm8921_l4>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
index d6ecfd8addb7..671d58cc2741 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
@@ -1,8 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "CompuLab CM-QS600";
 	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
@@ -69,6 +72,14 @@
 	status = "okay";
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	wlan_default_gpios: wlan-gpios-state {
 		pinconf {
@@ -82,6 +93,8 @@
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs2-supply = <&pm8921_s1>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
@@ -93,9 +106,8 @@
 		vdd_l27-supply = <&pm8921_s7>;
 		vdd_l28-supply = <&pm8921_s7>;
 
-
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -103,52 +115,51 @@
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2750000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
-
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
index b0c5e7bd5e74..ed86b24119c9 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -1,9 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Qualcomm APQ8064/IFC6410";
 	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
@@ -170,6 +173,14 @@
 	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	wlan_default_gpios: wlan-gpios-state {
 		pinconf {
@@ -192,6 +203,8 @@
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs2-supply = <&pm8921_s1>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
@@ -203,9 +216,8 @@
 		vdd_l27-supply = <&pm8921_s7>;
 		vdd_l28-supply = <&pm8921_s7>;
 
-
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -213,59 +225,63 @@
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2750000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			bias-pull-down;
 		};
 
-		lvs1 {
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_hdmi_switch: hdmi-switch {
 			bias-pull-down;
 		};
 	};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 9244512b74d1..2412aa3e3e8d 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -1,10 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Sony Xperia Z";
 	compatible = "sony,xperia-yuga", "qcom,apq8064";
@@ -65,6 +68,14 @@
 	status = "okay";
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio3", "gpio4", "gpio29", "gpio35";
@@ -82,11 +93,25 @@
 &riva {
 	pinctrl-names = "default";
 	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+
+	vddcx-supply = <&pm8921_s3>;
+	vddmx-supply = <&pm8921_l24>;
+	vddpx-supply = <&pm8921_s4>;
+
 	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8921_l4>;
+		vddrfa-supply = <&pm8921_s2>;
+		vddpa-supply = <&pm8921_l10>;
+		vdddig-supply = <&pm8921_lvs2>;
+	};
 };
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
 		vin_lvs_1_3_6-supply = <&pm8921_s4>;
 		vin_lvs_4_5_7-supply = <&pm8921_s4>;
@@ -98,7 +123,7 @@
 		vin_l28-supply = <&pm8921_s7>;
 
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -106,21 +131,21 @@
 			bias-pull-down;
 		};
 
-		s2 {
+		pm8921_s2: s2 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <500000>;
 			regulator-max-microvolt = <1150000>;
 			qcom,switch-mode-frequency = <4800000>;
 			bias-pull-down;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-always-on;
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -129,205 +154,207 @@
 			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s8 {
+		pm8921_s8: s8 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			qcom,switch-mode-frequency = <1600000>;
 		};
 
 		/* PMOS LDO */
-		l1 {
+		pm8921_l1: l1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 			bias-pull-down;
 		};
 
-		l2 {
+		pm8921_l2: l2 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3075000>;
 			regulator-max-microvolt = <3075000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-always-on;
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l7 {
+		pm8921_l7: l7 {
 			regulator-min-microvolt = <1850000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l8 {
+		pm8921_l8: l8 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			bias-pull-down;
 		};
 
-		l9 {
+		pm8921_l9: l9 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l10 {
+		pm8921_l10: l10 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 			bias-pull-down;
 		};
 
-		l11 {
+		pm8921_l11: l11 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l12 {
+		pm8921_l12: l12 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l14 {
+		pm8921_l14: l14 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l15 {
+		pm8921_l15: l15 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l16 {
+		pm8921_l16: l16 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			bias-pull-down;
 		};
 
-		l17 {
+		pm8921_l17: l17 {
 			regulator-min-microvolt = <2000000>;
 			regulator-max-microvolt = <2000000>;
 			bias-pull-down;
 		};
 
-		l18 {
+		pm8921_l18: l18 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l21 {
+		pm8921_l21: l21 {
 			regulator-min-microvolt = <1050000>;
 			regulator-max-microvolt = <1050000>;
 			bias-pull-down;
 		};
 
-		l22 {
+		pm8921_l22: l22 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l24 {
+		pm8921_l24: l24 {
 			regulator-min-microvolt = <750000>;
 			regulator-max-microvolt = <1150000>;
 			bias-pull-down;
 		};
 
-		l25 {
+		pm8921_l25: l25 {
 			regulator-always-on;
 			regulator-min-microvolt = <1250000>;
 			regulator-max-microvolt = <1250000>;
 			bias-pull-down;
 		};
 
-		l27 {
+		pm8921_l27: l27 {
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 		};
 
-		l28 {
+		pm8921_l28: l28 {
 			regulator-min-microvolt = <1050000>;
 			regulator-max-microvolt = <1050000>;
 			bias-pull-down;
 		};
 
-		l29 {
+		pm8921_l29: l29 {
 			regulator-min-microvolt = <2000000>;
 			regulator-max-microvolt = <2000000>;
 			bias-pull-down;
 		};
 
 		/* Low Voltage Switch */
-		lvs1 {
+		pm8921_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		lvs2 {
+		pm8921_lvs2: lvs2 {
 			bias-pull-down;
 		};
 
-		lvs3 {
+		pm8921_lvs3: lvs3 {
 			bias-pull-down;
 		};
 
-		lvs4 {
+		pm8921_lvs4: lvs4 {
 			bias-pull-down;
 		};
 
-		lvs5 {
+		pm8921_lvs5: lvs5 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 
-		lvs7 {
+		pm8921_lvs7: lvs7 {
 			bias-pull-down;
 		};
 
-		usb-switch {};
+		pm8921_usb_switch: usb-switch {};
 
-		hdmi-switch {};
+		pm8921_hdmi_switch: hdmi-switch {
+			bias-pull-down;
+		};
 
-		ncp {
+		pm8921_ncp: ncp {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 59fd86b9fb47..3faf57035d54 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -284,23 +284,6 @@
 		};
 	};
 
-
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Charger temperature */
-	};
-
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -655,133 +638,16 @@
 			clock-names = "core";
 		};
 
-		ssbi@c00000 {
+		ssbi2: ssbi@c00000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00c00000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pm8821: pmic {
-				compatible = "qcom,pm8821";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8821_mpps: mpps@50 {
-					compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
-					reg = <0x50>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8821_mpps 0 0 4>;
-				};
-			};
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <74 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8921_gpio: gpio@150 {
-
-					compatible = "qcom,pm8921-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8921_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8921_mpps: mpps@50 {
-					compatible = "qcom,pm8921-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8921_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 1>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8921-adc";
-					reg = <197>;
-					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					batt_therm: adc-channel@8 {
-						reg = <0x00 0x08>;
-					};
-					batt_id: adc-channel@9 {
-						reg = <0x00 0x09>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					chg_temp: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-			};
 		};
 
 		qfprom: qfprom@700000 {
@@ -891,60 +757,6 @@
 				clocks = <&pxo_board>, <&cxo_board>;
 				clock-names = "pxo", "cxo";
 			};
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-
-				pm8921_s1: s1 {};
-				pm8921_s2: s2 {};
-				pm8921_s3: s3 {};
-				pm8921_s4: s4 {};
-				pm8921_s7: s7 {};
-				pm8921_s8: s8 {};
-
-				pm8921_l1: l1 {};
-				pm8921_l2: l2 {};
-				pm8921_l3: l3 {};
-				pm8921_l4: l4 {};
-				pm8921_l5: l5 {};
-				pm8921_l6: l6 {};
-				pm8921_l7: l7 {};
-				pm8921_l8: l8 {};
-				pm8921_l9: l9 {};
-				pm8921_l10: l10 {};
-				pm8921_l11: l11 {};
-				pm8921_l12: l12 {};
-				pm8921_l14: l14 {};
-				pm8921_l15: l15 {};
-				pm8921_l16: l16 {};
-				pm8921_l17: l17 {};
-				pm8921_l18: l18 {};
-				pm8921_l21: l21 {};
-				pm8921_l22: l22 {};
-				pm8921_l23: l23 {};
-				pm8921_l24: l24 {};
-				pm8921_l25: l25 {};
-				pm8921_l26: l26 {};
-				pm8921_l27: l27 {};
-				pm8921_l28: l28 {};
-				pm8921_l29: l29 {};
-
-				pm8921_lvs1: lvs1 {};
-				pm8921_lvs2: lvs2 {};
-				pm8921_lvs3: lvs3 {};
-				pm8921_lvs4: lvs4 {};
-				pm8921_lvs5: lvs5 {};
-				pm8921_lvs6: lvs6 {};
-				pm8921_lvs7: lvs7 {};
-
-				pm8921_usb_switch: usb-switch {};
-
-				pm8921_hdmi_switch: hdmi-switch {
-					bias-pull-down;
-				};
-
-				pm8921_ncp: ncp {};
-			};
 		};
 
 		usb1: usb@12500000 {
@@ -1472,7 +1284,7 @@
 			qcom,ncb = <3>;
 		};
 
-		pcie: pci@1b500000 {
+		pcie: pcie@1b500000 {
 			compatible = "qcom,pcie-apq8064";
 			reg = <0x1b500000 0x1000>,
 			      <0x1b502000 0x80>,
@@ -1623,10 +1435,6 @@
 
 			memory-region = <&wcnss_mem>;
 
-			vddcx-supply = <&pm8921_s3>;
-			vddmx-supply = <&pm8921_l24>;
-			vddpx-supply = <&pm8921_s4>;
-
 			status = "disabled";
 
 			iris {
@@ -1634,11 +1442,6 @@
 
 				clocks = <&cxo_board>;
 				clock-names = "xo";
-
-				vddxo-supply = <&pm8921_l4>;
-				vddrfa-supply = <&pm8921_s2>;
-				vddpa-supply = <&pm8921_l10>;
-				vdddig-supply = <&pm8921_lvs2>;
 			};
 
 			smd-edge {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
index 6788ddb9cbc8..85d13ba363f7 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
@@ -4,8 +4,8 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 
 /delete-node/ &mpss_region;
 
@@ -49,6 +49,33 @@
 			no-map;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_uart2 {
@@ -403,6 +430,10 @@
 	pinctrl-1 = <&sdc2_off>;
 };
 
+&smbb {
+	status = "okay";
+};
+
 &tlmm {
 	sdc1_on: sdc1-on-state {
 		clk-pins {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
index 116e59a3b76d..1df24c922be9 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ8084/IFC6540";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
index c6b6680248a6..d4e6aee034af 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ 8084-MTP";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
index 468ebc40d2ad..374af6dd360a 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
@@ -98,7 +98,7 @@
 			};
 		};
 
-		pci@40000000 {
+		pcie@40000000 {
 			status = "okay";
 			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 9844e0b7cff9..f989bd741cd1 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -224,7 +224,7 @@
 		};
 
 		sdhci: mmc@7824900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,ipq4019-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x11c>, <0x7824000 0x800>;
 			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -417,7 +417,7 @@
 			reg = <0x4ab000 0x4>;
 		};
 
-		pcie0: pci@40000000 {
+		pcie0: pcie@40000000 {
 			compatible = "qcom,pcie-ipq4019";
 			reg = <0x40000000 0xf1d>,
 			      <0x40000f20 0xa8>,
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 6198f42f6a9c..6a7f4dd0f775 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -366,7 +366,7 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
@@ -1076,7 +1076,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pci@1b500000 {
+		pcie0: pcie@1b500000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b500000 0x1000
 			       0x1b502000 0x80
@@ -1127,7 +1127,7 @@
 			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 		};
 
-		pcie1: pci@1b700000 {
+		pcie1: pcie@1b700000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b700000 0x1000
 			       0x1b702000 0x80
@@ -1178,7 +1178,7 @@
 			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 		};
 
-		pcie2: pci@1b900000 {
+		pcie2: pcie@1b900000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b900000 0x1000
 			       0x1b902000 0x80
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
index b269fdca1460..e3b4b93c3d38 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -6,11 +6,11 @@
  * Author : Neil Armstrong <narmstrong@baylibre.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 #include "qcom-mdm9615-wp8548.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "MangOH Green with WP8548 Module";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index 92c8003dac25..0dd52cac0e2e 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "qcom-mdm9615.dtsi"
+#include "pm8018.dtsi"
 
 / {
 	model = "Sierra Wireless WP8548 Module";
@@ -76,7 +77,11 @@
 	};
 };
 
-&pmicgpio {
+&pm8018 {
+	interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pm8018_gpio {
 	usb_vbus_5v_pins: usb-vbus-5v-state {
 		pins = "gpio4";
 		function = "normal";
@@ -129,6 +134,142 @@
 	pinctrl-names = "default";
 };
 
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8018-regulators";
+
+		vin_lvs1-supply = <&pm8018_s3>;
+
+		vdd_l7-supply = <&pm8018_s4>;
+		vdd_l8-supply = <&pm8018_s3>;
+		vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+		/* Buck SMPS */
+		pm8018_s1: s1 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s2: s2 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s3: s3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s4: s4 {
+			regulator-min-microvolt = <2100000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s5: s5 {
+			regulator-always-on;
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1350000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8018_l2: l2 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l3: l3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l4: l4 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8018_l5: l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8018_l8: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8018_l9: l9 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8018_l10: l10 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l11: l11 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l12: l12 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l13: l13 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8018_l14: l14 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8018_lvs1: lvs1 {
+			bias-pull-down;
+		};
+	};
+};
+
 &sdcc1 {
 	status = "okay";
 };
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index 63e21aa23642..34c60994d026 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -256,57 +256,10 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8018", "qcom,pm8921";
-				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pmicmpp: mpps@50 {
-					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pmicmpp 0 0 6>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pmicgpio: gpio@150 {
-					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pmicgpio 0 0 6>;
-					#gpio-cells = <2>;
-				};
-			};
 		};
 
 		sdcc1bam: dma-controller@12182000 {
@@ -383,140 +336,6 @@
 				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8018-regulators";
-
-				vin_lvs1-supply = <&pm8018_s3>;
-
-				vdd_l7-supply = <&pm8018_s4>;
-				vdd_l8-supply = <&pm8018_s3>;
-				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
-
-				/* Buck SMPS */
-				pm8018_s1: s1 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s2: s2 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s3: s3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s4: s4 {
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s5: s5 {
-					regulator-always-on;
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* PMOS LDO */
-				pm8018_l2: l2 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l3: l3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l4: l4 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				pm8018_l5: l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l6: l6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l7: l7 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8018_l8: l8 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8018_l9: l9 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				pm8018_l10: l10 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l11: l11 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l12: l12 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l13: l13 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8018_l14: l14 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				pm8018_lvs1: lvs1 {
-					bias-pull-down;
-				};
-			};
 		};
 	};
 };
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
new file mode 100644
index 000000000000..525d8c608b06
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common Board Device Tree for Microsoft MSM8x26-based Lumias
+ *
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+#include <dt-bindings/input/input.h>
+
+/*
+ * Delete all generic (msm8226.dtsi) reserved
+ * memory mappings which are different on these devices.
+ */
+/delete-node/ &smem_region;
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* microSD */
+		display0 = &framebuffer;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x3200000 0x800000>;
+			format = "a8r8g8b8";
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 4)>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	/*
+	 * This device being a WP platform has a different
+	 * memory layout than other Android based devices.
+	 * This smem memory region is directly copied from
+	 * the original UEFI firmware.
+	 */
+	reserved-memory {
+		display_reserved: framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		/* These values were taken from the original firmware DSDT */
+		pm8226_s1: s1 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2075000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio106", "gpio107", "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		irq-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio16";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
new file mode 100644
index 000000000000..2c664b5934ec
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Microsoft Lumia 640";
+	compatible = "microsoft,dempsey", "qcom,msm8226";
+	chassis-type = "handset";
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
new file mode 100644
index 000000000000..731c5c375678
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Microsoft Lumia 640 XL";
+	compatible = "microsoft,makepeace", "qcom,msm8226";
+	chassis-type = "handset";
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
new file mode 100644
index 000000000000..992b7115b5f8
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Nokia Lumia 630";
+	compatible = "microsoft,moneypenny", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&framebuffer {
+	width = <480>;
+	height = <854>;
+	stride = <(480 * 4)>;
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 97a377b5a0ec..b492c95e5d30 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -442,8 +442,8 @@
 				 <&gcc GPLL0_VOTE>,
 				 <&gcc GPLL1_VOTE>,
 				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <0>,
-				 <0>;
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>;
 			clock-names = "xo",
 				      "mmss_gpll0_vote",
 				      "gpll0_vote",
@@ -875,8 +875,8 @@
 				offset = <0x65c>;
 
 				mode-bootloader = <0x77665500>;
-				mode-normal     = <0x77665501>;
-				mode-recovery   = <0x77665502>;
+				mode-normal = <0x77665501>;
+				mode-recovery = <0x77665502>;
 			};
 		};
 
@@ -1006,6 +1006,46 @@
 					      "ref";
 			};
 		};
+
+		gpu: adreno@fdb00000 {
+			compatible = "qcom,adreno-305.18", "qcom,adreno";
+			reg = <0xfdb00000 0x10000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&mmcc OXILI_GFX3D_CLK>,
+				 <&mmcc OXILICX_AHB_CLK>,
+				 <&mmcc OXILICX_AXI_CLK>;
+			clock-names = "core", "iface", "mem_iface";
+
+			sram = <&gmu_sram>;
+			power-domains = <&mmcc OXILICX_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-19000000 {
+					opp-hz = /bits/ 64 <19000000>;
+				};
+			};
+		};
 	};
 
 	thermal-zones {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
index be18f1be29a1..69fe651f564d 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
@@ -2,6 +2,7 @@
 #include <dt-bindings/input/input.h>
 
 #include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
 
 / {
 	model = "Qualcomm MSM8660 SURF";
@@ -35,30 +36,42 @@
 };
 
 &pm8058 {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_FN_F1)
-			MATRIX_KEY(0, 1, KEY_UP)
-			MATRIX_KEY(0, 2, KEY_LEFT)
-			MATRIX_KEY(0, 3, KEY_VOLUMEUP)
-			MATRIX_KEY(1, 0, KEY_FN_F2)
-			MATRIX_KEY(1, 1, KEY_RIGHT)
-			MATRIX_KEY(1, 2, KEY_DOWN)
-			MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
-			MATRIX_KEY(2, 3, KEY_ENTER)
-			MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(4, 1, KEY_UP)
-			MATRIX_KEY(4, 2, KEY_LEFT)
-			MATRIX_KEY(4, 3, KEY_HOME)
-			MATRIX_KEY(4, 4, KEY_FN_F3)
-			MATRIX_KEY(5, 0, KEY_CAMERA)
-			MATRIX_KEY(5, 1, KEY_RIGHT)
-			MATRIX_KEY(5, 2, KEY_DOWN)
-			MATRIX_KEY(5, 3, KEY_BACK)
-			MATRIX_KEY(5, 4, KEY_MENU)
-			>;
-		keypad,num-rows = <6>;
-		keypad,num-columns = <5>;
+	interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8058_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_FN_F1)
+		MATRIX_KEY(0, 1, KEY_UP)
+		MATRIX_KEY(0, 2, KEY_LEFT)
+		MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+		MATRIX_KEY(1, 0, KEY_FN_F2)
+		MATRIX_KEY(1, 1, KEY_RIGHT)
+		MATRIX_KEY(1, 2, KEY_DOWN)
+		MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+		MATRIX_KEY(2, 3, KEY_ENTER)
+		MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(4, 1, KEY_UP)
+		MATRIX_KEY(4, 2, KEY_LEFT)
+		MATRIX_KEY(4, 3, KEY_HOME)
+		MATRIX_KEY(4, 4, KEY_FN_F3)
+		MATRIX_KEY(5, 0, KEY_CAMERA)
+		MATRIX_KEY(5, 1, KEY_RIGHT)
+		MATRIX_KEY(5, 2, KEY_DOWN)
+		MATRIX_KEY(5, 3, KEY_BACK)
+		MATRIX_KEY(5, 4, KEY_MENU)
+		>;
+	keypad,num-rows = <6>;
+	keypad,num-columns = <5>;
+};
+
+&rpm {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 78023ed2fdf7..a7c245b9c8f9 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -73,22 +73,6 @@
 		};
 	};
 
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
-	};
-
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -334,143 +318,10 @@
 			status = "disabled";
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pm8058: pmic {
-				compatible = "qcom,pm8058";
-				interrupt-parent = <&tlmm>;
-				interrupts = <88 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8058_gpio: gpio@150 {
-					compatible = "qcom,pm8058-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8058_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8058_mpps: mpps@50 {
-					compatible = "qcom,pm8058-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8058_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8058-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pm8058_keypad: keypad@148 {
-					compatible = "qcom,pm8058-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <74 1>, <75 1>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8058-adc";
-					reg = <0x197>;
-					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					ichg: adc-channel@3 {
-						reg = <0x00 0x03>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					ref_325mv: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-
-				rtc@1e8 {
-					compatible = "qcom,pm8058-rtc";
-					reg = <0x1e8>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <39 1>;
-					allow-set-time;
-				};
-
-				vibrator@4a {
-					compatible = "qcom,pm8058-vib";
-					reg = <0x4a>;
-				};
-
-				pm8058_led48: led@48 {
-					compatible = "qcom,pm8058-keypad-led";
-					reg = <0x48>;
-					status = "disabled";
-				};
-
-				pm8058_led131: led@131 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x131>;
-					status = "disabled";
-				};
-
-				pm8058_led132: led@132 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x132>;
-					status = "disabled";
-				};
-
-				pm8058_led133: led@133 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x133>;
-					status = "disabled";
-				};
-
-			};
 		};
 
 		l2cc: clock-controller@2082000 {
@@ -496,72 +347,6 @@
 				clocks = <&pxo_board>;
 				clock-names = "pxo";
 			};
-
-			regulators-0 {
-				compatible = "qcom,rpm-pm8901-regulators";
-
-				pm8901_l0: l0 {};
-				pm8901_l1: l1 {};
-				pm8901_l2: l2 {};
-				pm8901_l3: l3 {};
-				pm8901_l4: l4 {};
-				pm8901_l5: l5 {};
-				pm8901_l6: l6 {};
-
-				/* S0 and S1 Handled as SAW regulators by SPM */
-				pm8901_s2: s2 {};
-				pm8901_s3: s3 {};
-				pm8901_s4: s4 {};
-
-				pm8901_lvs0: lvs0 {};
-				pm8901_lvs1: lvs1 {};
-				pm8901_lvs2: lvs2 {};
-				pm8901_lvs3: lvs3 {};
-
-				pm8901_mvs: mvs {};
-			};
-
-			regulators-1 {
-				compatible = "qcom,rpm-pm8058-regulators";
-
-				pm8058_l0: l0 {};
-				pm8058_l1: l1 {};
-				pm8058_l2: l2 {};
-				pm8058_l3: l3 {};
-				pm8058_l4: l4 {};
-				pm8058_l5: l5 {};
-				pm8058_l6: l6 {};
-				pm8058_l7: l7 {};
-				pm8058_l8: l8 {};
-				pm8058_l9: l9 {};
-				pm8058_l10: l10 {};
-				pm8058_l11: l11 {};
-				pm8058_l12: l12 {};
-				pm8058_l13: l13 {};
-				pm8058_l14: l14 {};
-				pm8058_l15: l15 {};
-				pm8058_l16: l16 {};
-				pm8058_l17: l17 {};
-				pm8058_l18: l18 {};
-				pm8058_l19: l19 {};
-				pm8058_l20: l20 {};
-				pm8058_l21: l21 {};
-				pm8058_l22: l22 {};
-				pm8058_l23: l23 {};
-				pm8058_l24: l24 {};
-				pm8058_l25: l25 {};
-
-				pm8058_s0: s0 {};
-				pm8058_s1: s1 {};
-				pm8058_s2: s2 {};
-				pm8058_s3: s3 {};
-				pm8058_s4: s4 {};
-
-				pm8058_lvs0: lvs0 {};
-				pm8058_lvs1: lvs1 {};
-
-				pm8058_ncp: ncp {};
-			};
 		};
 
 		amba {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
new file mode 100644
index 000000000000..0dd662af11d0
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+	model = "HTC One Mini 2";
+	compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		unknown@5b00000 {
+			reg = <0x05b00000 0x200000>;
+			no-map;
+		};
+
+		unknown@7500000 {
+			reg = <0x07500000 0xb00000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x4f00000>;
+			no-map;
+		};
+
+		unknown@cf00000 {
+			reg = <0x0cf00000 0x200000>;
+			no-map;
+		};
+
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x3a000>;
+			no-map;
+		};
+
+		unknown@d13a000 {
+			reg = <0x0d13a000 0xc6000>;
+			no-map;
+		};
+
+		wcnss_region: wcnss@d200000 {
+			reg = <0x0d200000 0x650000>;
+			no-map;
+		};
+
+		unknown@d850000 {
+			reg = <0x0d850000 0x3b0000>;
+			no-map;
+		};
+
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1400000>;
+			no-map;
+		};
+
+		unknown@f000000 {
+			reg = <0x0f000000 0x500000>;
+			no-map;
+		};
+
+		venus_region: venus@f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		unknown@fb00000 {
+			reg = <0x0fb00000 0x1b00000>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	magnetometer@d {
+		compatible = "asahi-kasei,ak8963";
+		reg = <0x0d>;
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&pm8226_l19>;
+		vid-supply = <&pm8226_l28>;
+	};
+
+	accelerometer@18 {
+		compatible = "bosch,bma250e";
+		reg = <0x18>;
+		interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_l28>;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	/* TFA9887 @ 34 */
+	/* TFA9887 @ 35 */
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+
+		syna,startup-delay-ms = <160>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	/* NCP6924 Camera Regulators @ 10 */
+	/* PN544 NFC @ 28 */
+	/* TPS61310 Flash/Torch @ 33 */
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1750000>;
+	qcom,fast-charge-current-limit = <1750000>;
+	qcom,fast-charge-safe-voltage = <4360000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4300000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
new file mode 100644
index 000000000000..9b48661d69c5
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c3 instead */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Nokia Lumia 735";
+	compatible = "microsoft,superman-lte", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "disabled";
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
new file mode 100644
index 000000000000..53a6d4e85959
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c1 instead */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Nokia Lumia 830";
+	compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "disabled";
+};
+
+&gpio_keys {
+	key-camera-snapshot {
+		label = "Camera Snapshot";
+		gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key-camera-focus {
+		label = "Camera Focus";
+		gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
new file mode 100644
index 000000000000..0cbe2d2fbbb1
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+	model = "Motorola Moto G 4G (2013)";
+	compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	sensor@48 {
+		compatible = "ti,tmp108";
+		reg = <0x48>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-boot-on;
+		};
+
+		pm8226_lvs1: lvs1 {
+			/* Pull-up for I2C lines */
+			regulator-always-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <2000000>;
+	qcom,fast-charge-current-limit = <1900000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 6c1bc3818883..36f4c997b0b3 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -2,6 +2,7 @@
 #include <dt-bindings/input/input.h>
 
 #include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
 
 / {
 	model = "Qualcomm MSM8960 CDP";
@@ -88,17 +89,21 @@
 	};
 };
 
-&pmicintc {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_VOLUMEUP)
-			MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
-			MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(0, 3, KEY_CAMERA)
-			>;
-		keypad,num-rows = <1>;
-		keypad,num-columns = <5>;
-	};
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+		MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(0, 3, KEY_CAMERA)
+		>;
+	keypad,num-rows = <1>;
+	keypad,num-columns = <5>;
+
+	status = "okay";
 };
 
 &rpm {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index 13e85c287498..1a5116336ff0 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
 
 #include "qcom-msm8960.dtsi"
-#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include "pm8921.dtsi"
 
 / {
 	model = "Samsung Galaxy Express SGH-I437";
@@ -84,6 +85,10 @@
 	};
 };
 
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &rpm {
 	regulators {
 		compatible = "qcom,rpm-pm8921-regulators";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index d13080fcbeea..f420740e068e 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -200,10 +200,6 @@
 				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-			};
 		};
 
 		acc0: clock-controller@2088000 {
@@ -259,49 +255,10 @@
 			};
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&msmgpio>;
-				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				keypad@148 {
-					compatible = "qcom,pm8921-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
-						     <75 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-			};
 		};
 
 		rng@1a500000 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 60bdfddeae69..4aaae8537a3f 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -60,6 +60,33 @@
 		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
 	};
 
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -340,6 +367,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -347,6 +375,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
index 68a2f9094e53..d34659ebac22 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -65,6 +65,33 @@
 			pmsg-size = <0x80000>;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -190,6 +217,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -197,6 +225,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
@@ -425,6 +454,8 @@
 	qcom,fast-charge-low-threshold-voltage = <3400000>;
 	qcom,auto-recharge-threshold-voltage = <4200000>;
 	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index 0bc2e66d15b1..b1413983787c 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -346,6 +346,20 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		saw_l2: power-controller@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		watchdog@f9017000 {
+			compatible = "qcom,apss-wdt-msm8974", "qcom,kpss-wdt";
+			reg = <0xf9017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -405,52 +419,46 @@
 			};
 		};
 
-		saw0: power-controller@f9089000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw1: power-controller@f9099000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw2: power-controller@f90a9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw3: power-controller@f90b9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
 		acc0: power-manager@f9088000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw0: power-controller@f9089000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc1: power-manager@f9098000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw1: power-controller@f9099000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc2: power-manager@f90a8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw2: power-controller@f90a9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc3: power-manager@f90b8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw3: power-controller@f90b9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		sdhc_1: mmc@f9824900 {
 			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
@@ -1063,6 +1071,15 @@
 			};
 		};
 
+		bimc: interconnect@fc380000 {
+			reg = <0xfc380000 0x6a000>;
+			compatible = "qcom,msm8974-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
 		gcc: clock-controller@fc400000 {
 			compatible = "qcom,gcc-msm8974";
 			#clock-cells = <1>;
@@ -1101,22 +1118,13 @@
 			};
 		};
 
-		bimc: interconnect@fc380000 {
-			reg = <0xfc380000 0x6a000>;
-			compatible = "qcom,msm8974-bimc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
-		};
-
 		snoc: interconnect@fc460000 {
 			reg = <0xfc460000 0x4000>;
 			compatible = "qcom,msm8974-snoc";
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		pnoc: interconnect@fc468000 {
@@ -1125,7 +1133,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_PNOC_A_CLK>;
 		};
 
 		ocmemnoc: interconnect@fc470000 {
@@ -1134,7 +1142,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
-			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+				 <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
 		};
 
 		mmssnoc: interconnect@fc478000 {
@@ -1143,7 +1151,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&mmcc MMSS_S0_AXI_CLK>,
-			         <&mmcc MMSS_S0_AXI_CLK>;
+				 <&mmcc MMSS_S0_AXI_CLK>;
 		};
 
 		cnoc: interconnect@fc480000 {
@@ -1152,7 +1160,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@fc4a9000 {
@@ -1633,13 +1641,6 @@
 					bias-pull-up;
 					drive-strength = <2>;
 				};
-
-				cd-pins {
-					pins = "gpio54";
-					function = "gpio";
-					bias-disable;
-					drive-strength = <2>;
-				};
 			};
 
 			blsp1_uart2_default: blsp1-uart2-default-state {
@@ -2408,31 +2409,4 @@
 			     <GIC_PPI 1 0xf08>;
 		clock-frequency = <19200000>;
 	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
-	};
-
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "vph-pwr";
-
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		regulator-always-on;
-	};
 };
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
index 42d253b75dad..fe227fd3f908 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -57,6 +57,33 @@
 		enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
 		vcc-supply = <&pm8941_l18>;
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -381,6 +408,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4350000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
 	qcom,minimum-input-voltage = <4450000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
index 8230d0e1d95d..4c8edadea0ac 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
@@ -51,6 +51,33 @@
 			debounce-interval = <150>;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c1 {
@@ -433,6 +460,10 @@
 	status = "okay";
 };
 
+&smbb {
+	status = "okay";
+};
+
 &tlmm {
 	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
 		pins = "gpio68";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
index 3e2c86591ee2..b93539e2b87e 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/leds/common.h>
@@ -155,7 +155,15 @@
 		enable-active-high;
 	};
 
-	/delete-node/ vreg-boost;
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -355,7 +363,6 @@
 		vddr-supply = <&vreg_panel>;
 
 		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
-		te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 
 		port {
 			panel_in: endpoint {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 11468d1409f7..ee94741a26ed 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -84,6 +84,33 @@
 		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
 	};
 
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -297,6 +324,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -304,6 +332,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
@@ -558,6 +587,8 @@
 	qcom,fast-charge-low-threshold-voltage = <3400000>;
 	qcom,auto-recharge-threshold-voltage = <4200000>;
 	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
index 7e97ad5803d8..247069361909 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
@@ -9,7 +9,7 @@
 #include "qcom-sdx55.dtsi"
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pm8150b.dtsi>
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX55 MTP";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
index 51058b065279..082f7ed1a01f 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Thundercomm T55 Development Kit";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
index 8fadc6e70692..e336a15b45c4 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Telit FN980 TLB";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 2aa5089a8513..27429d0fedfb 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -228,31 +228,26 @@
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx55-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00ff6000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
-
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6200 0x170>,
-				      <0x00ff6400 0x200>,
-				      <0x00ff6800 0x800>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			status = "disabled";
 		};
 
 		mc_virt: interconnect@1100000 {
@@ -345,10 +340,10 @@
 					  "msi8";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
 				 <&gcc GCC_PCIE_AUX_CLK>,
@@ -436,9 +431,9 @@
 			status = "disabled";
 		};
 
-		pcie_phy: phy@1c07000 {
+		pcie_phy: phy@1c06000 {
 			compatible = "qcom,sdx55-qmp-pcie-phy";
-			reg = <0x01c07000 0x2000>;
+			reg = <0x01c06000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -585,10 +580,10 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -603,7 +598,7 @@
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -612,7 +607,7 @@
 			compatible = "qcom,sdx55-pdc", "qcom,pdc";
 			reg = <0x0b210000 0x30000>;
 			qcom,pdc-ranges = <0 179 52>;
-			#interrupt-cells = <3>;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
 			interrupt-controller;
 		};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
index 9649c859a2c3..07c10c84eefa 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
@@ -12,7 +12,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pmk8350.dtsi>
 #include <arm64/qcom/pm7250b.dtsi>
-#include "qcom-pmx65.dtsi"
+#include "pmx65.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX65 MTP";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index e559adaaeee7..40591a4da6a4 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -204,8 +204,16 @@
 		gcc: clock-controller@100000 {
 			compatible = "qcom,gcc-sdx65";
 			reg = <0x00100000 0x001f7400>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
-			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <&pcie_phy>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk",
+				      "pcie_pipe_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
 			#power-domain-cells = <1>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -233,32 +241,27 @@
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c8>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00ff6000 0x2000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_EN>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_EN>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
 			status = "disabled";
 
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6e00 0x160>,
-				      <0x00ff7000 0x1ec>,
-				      <0x00ff6200 0x1e00>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
 		};
 
 		system_noc: interconnect@1620000 {
@@ -338,7 +341,7 @@
 			power-domains = <&gcc PCIE_GDSC>;
 
 			phys = <&pcie_phy>;
-			phy-names = "pcie-phy";
+			phy-names = "pciephy";
 
 			max-link-speed = <3>;
 			num-lanes = <2>;
@@ -520,7 +523,7 @@
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -530,7 +533,7 @@
 			reg = <0x0c264000 0x1000>;
 		};
 
-		spmi_bus: qcom,spmi@c440000 {
+		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0xd00>,
 				<0xc600000 0x2000000>,
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi
index e10f99278c77..de52218ceaa4 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi
@@ -27,6 +27,15 @@
 			};
 		};
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &can1 {
@@ -69,6 +78,12 @@
 		clocks = <&cec_clock>;
 		clock-names = "cec";
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
index d21e00e1f401..e1ac2c161e73 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
@@ -132,7 +132,7 @@
 		i2c-gpio,delay-us = <5>;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
@@ -143,6 +143,18 @@
 		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
 	};
 
+	panel {
+		compatible = "ampire,am-800480l1tmqw-t00h";
+		backlight = <&backlight>;
+		power-supply = <&reg_5p0v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdc0_rgb>;
+			};
+		};
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 
@@ -228,10 +240,22 @@
 	};
 };
 
-&pfc {
+&lcdc0 {
 	pinctrl-0 = <&lcd0_pins>;
 	pinctrl-names = "default";
 
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pfc {
 	ether_pins: ether {
 		groups = "gether_mii", "gether_int";
 		function = "gether";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7740.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7740.dtsi
index 1b2cf5fa322b..55884ec701f8 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7740.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7740.dtsi
@@ -398,6 +398,61 @@
 		status = "disabled";
 	};
 
+	lcdc0: lcd-controller@fe940000 {
+		compatible = "renesas,r8a7740-lcdc";
+		reg = <0xfe940000 0x4000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_LCDC0>,
+			 <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>,
+			 <&vou_clk>;
+		clock-names = "fck", "media", "lclk", "video";
+		power-domains = <&pd_a4lc>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lcdc0_rgb: endpoint {
+				};
+			};
+		};
+	};
+
+	lcdc1: lcd-controller@fe944000 {
+		compatible = "renesas,r8a7740-lcdc";
+		reg = <0xfe944000 0x4000>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_LCDC1>,
+			 <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk1_clk>,
+			 <&vou_clk>;
+		clock-names = "fck", "media", "lclk", "video";
+		power-domains = <&pd_a4lc>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lcdc1_rgb: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lcdc1_hdmi: endpoint {
+				};
+			};
+		};
+	};
+
 	tmu0: timer@fff80000 {
 		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
 		reg = <0xfff80000 0x2c>;
@@ -474,6 +529,16 @@
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
+		lcdlclk0_clk: lcdlclk0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		lcdlclk1_clk: lcdlclk1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
 
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
index b1f679da36b2..a0b574398055 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
@@ -34,6 +34,15 @@
 			};
 		};
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &du {
@@ -81,6 +90,12 @@
 		clock-names = "cec";
 		pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts
index c105932f642e..24411044ef6c 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts
@@ -182,7 +182,7 @@
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	stmpe811@44 {
+	port-expander@44 {
 		compatible = "st,stmpe811";
 		reg = <0x44>;
 		interrupt-parent = <&gpio4>;
@@ -197,7 +197,7 @@
 		/* internal ADC reference */
 		st,ref-sel = <0>;
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7779-marzen.dts linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
index 08ea149b1ee6..9b13e8d1538b 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
@@ -52,10 +52,10 @@
 		states = <3300000 1>, <1800000 0>;
 	};
 
-	keyboard-irq {
+	keypad-0 {
 		compatible = "gpio-keys";
 
-		pinctrl-0 = <&keyboard_irq_pins>;
+		pinctrl-0 = <&keypad0_pins>;
 		pinctrl-names = "default";
 
 		interrupt-parent = <&gpio0>;
@@ -76,11 +76,11 @@
 		};
 	};
 
-	keyboard-gpio {
+	keypad-1 {
 		compatible = "gpio-keys-polled";
 		poll-interval = <50>;
 
-		pinctrl-0 = <&keyboard_gpio_pins>;
+		pinctrl-0 = <&keypad1_pins>;
 		pinctrl-names = "default";
 
 		key-3 {
@@ -193,7 +193,7 @@
 };
 
 &gpio0 {
-	keyboard-irq-hog {
+	keypad0-hog {
 		gpio-hog;
 		gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>;
 		input;
@@ -215,6 +215,35 @@
 };
 
 &lbsc {
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x04000000>;
+		pinctrl-0 = <&flash_pins>;
+		pinctrl-names = "default";
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "uboot-env";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "flash";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+
 	ethernet@18000000 {
 		compatible = "smsc,lan89218", "smsc,lan9115";
 		reg = <0x18000000 0x100>;
@@ -266,6 +295,11 @@
 		};
 	};
 
+	flash_pins: flash {
+		groups = "lbsc_cs0";
+		function = "lbsc";
+	};
+
 	scif2_pins: scif2 {
 		groups = "scif2_data_c";
 		function = "scif2";
@@ -286,11 +320,11 @@
 		function = "hspi0";
 	};
 
-	keyboard_irq_pins: keyboard-irq {
+	keypad0_pins: keypad-0 {
 		pins = "GP_0_17", "GP_0_18";
 		bias-pull-up;
 	};
-	keyboard_gpio_pins: keyboard-gpio {
+	keypad1_pins: keypad-1 {
 		pins = "GP_0_19", "GP_0_20";
 		bias-pull-up;
 	};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7790-lager.dts linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7790-lager.dts
index 4d666ad8b114..8590981245a6 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7790-lager.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7790-lager.dts
@@ -122,6 +122,15 @@
 		};
 	};
 
+	fixedregulator1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -303,7 +312,7 @@
 	 *
 	 * IIC0/I2C0 does not appear to support fallback to GPIO.
 	 */
-	i2cexio0: i2c-10 {
+	i2cexio0: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic0>, <&i2c0>;
 		i2c-bus-name = "i2c-exio0";
@@ -316,7 +325,7 @@
 	 * This is similar to the arangement described for i2cexio0 (above)
 	 * with a fallback to GPIO also provided.
 	 */
-	i2cexio1: i2c-11 {
+	i2cexio1: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-exio1";
@@ -328,7 +337,7 @@
 	 * IIC2 and I2C2 may be switched using pinmux.
 	 * A fallback to GPIO is also provided.
 	 */
-	i2chdmi: i2c-12 {
+	i2chdmi: i2c-mux3 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -361,6 +370,12 @@
 			clocks = <&cec_clock>;
 			clock-names = "cec";
 
+			avdd-supply = <&fixedregulator1v8>;
+			dvdd-supply = <&fixedregulator1v8>;
+			pvdd-supply = <&fixedregulator1v8>;
+			dvdd-3v-supply = <&fixedregulator3v3>;
+			bgvdd-supply = <&fixedregulator1v8>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -417,7 +432,7 @@
 	 * IIC3 and I2C3 may be switched using pinmux.
 	 * IIC3/I2C3 does not appear to support fallback to GPIO.
 	 */
-	i2cpwr: i2c-13 {
+	i2cpwr: i2c-mux4 {
 		compatible = "i2c-demux-pinctrl";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq_pins>;
@@ -432,6 +447,7 @@
 			interrupt-parent = <&irqc0>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 
 			rtc {
 				compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7790-stout.dts linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7790-stout.dts
index fe14727eefe1..683f7395fab0 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7790-stout.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7790-stout.dts
@@ -44,6 +44,15 @@
 		};
 	};
 
+	fixedregulator1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -296,6 +305,12 @@
 		clocks = <&osc4_clk>;
 		clock-names = "cec";
 
+		avdd-supply = <&fixedregulator1v8>;
+		dvdd-supply = <&fixedregulator1v8>;
+		pvdd-supply = <&fixedregulator1v8>;
+		dvdd-3v-supply = <&fixedregulator3v3>;
+		bgvdd-supply = <&fixedregulator1v8>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -332,6 +347,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
index 545515b41ea3..0efd9f98c75a 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
@@ -174,6 +174,24 @@
 		};
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -340,7 +358,7 @@
 	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio1: i2c-12 {
+	i2cexio1: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-exio1";
@@ -351,7 +369,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-13 {
+	i2chdmi: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -384,6 +402,12 @@
 			clocks = <&cec_clock>;
 			clock-names = "cec";
 
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -446,7 +470,7 @@
 	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-14 {
+	i2cexio4: i2c-mux3 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -795,6 +819,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts
index ec0a20d5130d..93c86e921645 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts
@@ -47,6 +47,24 @@
 		reg = <2 0x00000000 0 0x40000000>;
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -148,7 +166,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-10 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -179,6 +197,12 @@
 			interrupt-parent = <&gpio3>;
 			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -389,6 +413,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		watchdog {
 			compatible = "dlg,da9063-watchdog";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7792-blanche.dts linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
index e793134f32a3..540a9ad28f28 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
@@ -30,6 +30,15 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	d1_8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -182,6 +191,35 @@
 };
 
 &lbsc {
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0x00000000 0x04000000>;
+		pinctrl-0 = <&flash_pins>;
+		pinctrl-names = "default";
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "uboot-env";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "flash";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+
 	ethernet@18000000 {
 		compatible = "smsc,lan89218", "smsc,lan9115";
 		reg = <0x18000000 0x100>;
@@ -240,6 +278,11 @@
 		function = "du1";
 	};
 
+	flash_pins: flash {
+		groups = "lbsc_cs0";
+		function = "lbsc";
+	};
+
 	keyboard_pins: keyboard {
 		pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2";
 		bias-pull-up;
@@ -296,6 +339,12 @@
 		interrupt-parent = <&irqc>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -332,6 +381,7 @@
 		interrupt-parent = <&irqc>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7792-wheat.dts linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
index f87e78fe3f6e..000f21a2a863 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
@@ -29,6 +29,15 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	d1_8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -254,6 +263,12 @@
 		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
 		reg-names = "main", "edid", "cec", "packet";
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -283,6 +298,12 @@
 		reg = <0x39>, <0x49>, <0x29>, <0x59>;
 		reg-names = "main", "edid", "cec", "packet";
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts
index 79b537b24642..1ea6c757893b 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts
@@ -165,6 +165,24 @@
 		};
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -324,7 +342,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-11 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -368,6 +386,12 @@
 			interrupt-parent = <&gpio3>;
 			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -430,7 +454,7 @@
 	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-12 {
+	i2cexio4: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -735,6 +759,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7794-alt.dts linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7794-alt.dts
index 08df031bc27c..b5ecafbb2e4d 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7794-alt.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7794-alt.dts
@@ -192,7 +192,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C1.
 	 */
-	i2chdmi: i2c-11 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-hdmi";
@@ -222,7 +222,7 @@
 	 * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-14 {
+	i2cexio4: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -453,6 +453,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7794-silk.dts linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7794-silk.dts
index b7af1befa126..595e074085eb 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r8a7794-silk.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r8a7794-silk.dts
@@ -102,6 +102,15 @@
 		};
 	};
 
+	d1_8v: regulator-d1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-d3-3v {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -225,7 +234,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C1.
 	 */
-	i2chdmi: i2c-10 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-hdmi";
@@ -256,6 +265,12 @@
 			interrupt-parent = <&gpio5>;
 			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
 
+			avdd-supply = <&d1_8v>;
+			dvdd-supply = <&d1_8v>;
+			pvdd-supply = <&d1_8v>;
+			dvdd-3v-supply = <&d3_3v>;
+			bgvdd-supply = <&d1_8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -424,6 +439,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r9a06g032.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index 0fa565a1c3ad..fa63e1afc4ef 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/renesas/r9a06g032.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -437,7 +437,7 @@
 		};
 
 		can0: can@52104000 {
-			compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000";
+			compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
 			reg = <0x52104000 0x800>;
 			reg-io-width = <4>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/Makefile linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/Makefile
index 0f46e18fe275..ab4cd9aab722 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/Makefile
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/Makefile
@@ -2,7 +2,9 @@
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rv1108-elgin-r1.dtb \
 	rv1108-evb.dtb \
+	rv1109-sonoff-ihost.dtb \
 	rv1126-edgeble-neu2-io.dtb \
+	rv1126-sonoff-ihost.dtb \
 	rk3036-evb.dtb \
 	rk3036-kylin.dtb \
 	rk3066a-bqcurie2.dtb \
@@ -10,6 +12,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3066a-mk808.dtb \
 	rk3066a-rayeager.dtb \
 	rk3128-evb.dtb \
+	rk3128-xpi-3128.dtb \
 	rk3188-bqedison2qc.dtb \
 	rk3188-px3-evb.dtb \
 	rk3188-radxarock.dtb \
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3036-kylin.dts linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
index 67e1e04139e7..e32c73d32f0a 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
@@ -8,11 +8,26 @@
 	model = "Rockchip RK3036 KylinBoard";
 	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
 
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x20000000>;
 	};
 
+	hdmi_con: hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
@@ -110,6 +125,12 @@
 	status = "okay";
 };
 
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi
index 78686fc72ce6..04af224005f8 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -17,6 +17,9 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -282,7 +285,6 @@
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
-		rockchip,default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;
 		dma-names = "rx-tx";
@@ -402,12 +404,20 @@
 		pinctrl-0 = <&hdmi_ctl>;
 		status = "disabled";
 
-		hdmi_in: port {
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			hdmi_in_vop: endpoint@0 {
+
+			hdmi_in: port@0 {
 				reg = <0>;
-				remote-endpoint = <&vop_out_hdmi>;
+
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
 			};
 		};
 	};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3066a.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3066a.dtsi
index de9915d946f7..30139f21de64 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3066a.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3066a.dtsi
@@ -13,6 +13,11 @@
 / {
 	compatible = "rockchip,rk3066a";
 
+	aliases {
+		gpio4 = &gpio4;
+		gpio6 = &gpio6;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3128-evb.dts linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3128-evb.dts
index c38f42497cbd..c7ab7fcdb436 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3128-evb.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3128-evb.dts
@@ -12,11 +12,6 @@
 	compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
 
 	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
-		i2c1 = &i2c1;
 		mmc0 = &emmc;
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
new file mode 100644
index 000000000000..03a97881519a
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3128.dtsi"
+
+/ {
+	model = "Geniatech XPI-3128";
+	compatible = "geniatech,xpi-3128", "rockchip,rk3128";
+
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <3300000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	dc_5v: dc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * This is a vbus-supply, which also supplies the GL852G usb hub,
+	 * thus has to be always-on
+	 */
+	host_pwr_5v: host-pwr-5v-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1500>;
+		regulator-name = "HOST_PWR_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_drv>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_led>;
+		};
+
+		led-spd {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			/*
+			 * currently not allowed to be set as per
+			 * https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml
+			 * and needs to set in userspace:
+			 *
+			 * linux,default-trigger = "netdev";
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&spd_led>;
+		};
+	};
+
+	mcu3v3: mcu3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "MCU3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_ddr: vcc-ddr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DDR";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_io: vcc-io-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_IO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_LAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: vcc-sd-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <500>;
+		regulator-name = "VCC_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwren>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc33_hdmi: vcc33-hdmi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC33_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcca_33>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcca_33: vcca-33-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCA_33";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_11: vdd-11-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_11";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd11_hdmi: vdd11-hdmi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD11_HDMI";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vdd_11>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_arm: vdd-arm-regulator {
+		compatible = "pwm-regulator";
+		regulator-name = "VDD_ARM";
+		pwms = <&pwm1 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * As per schematics vdd_log is minimum 900 mV, maximum 1400 mV.
+	 * Since there are HW blocks in PD_LOGIC (which are all driven by
+	 * this supply), that either do not have a driver at all or the
+	 * driver does not implement regulator support we have to make
+	 * sure here that the voltage never drops below 1050 mV.
+	 */
+	vdd_log: vdd-log-regulator {
+		compatible = "pwm-regulator";
+		regulator-name = "VDD_LOG";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-dutycycle-range = <30 100>;
+		pwm-supply = <&vcc_sys>;
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <4000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	vmmc-supply = <&vcc_io>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	cap-mmc-highspeed;
+	mmc-ddr-3_3v;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+	assigned-clocks = <&cru SCLK_MAC_SRC>;
+	assigned-clock-rates= <50000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names = /* GPIO0 A0-A7 */
+			  "", "", "HEADER_5", "HEADER_3",
+			  "", "", "", "",
+			  /* GPIO0 B0-B7 */
+			  "HEADER_22", "HEADER_23", "", "HEADER_19",
+			  "HEADER_26", "HEADER_21", "HEADER_24", "",
+			  /* GPIO0 C0-C7 */
+			  "", "HEADER_18", "", "",
+			  "", "", "", "",
+			  /* GPIO0 D0-D7 */
+			  "HEADER_36", "", "", "",
+			  "", "", "HEADER_13", "";
+};
+
+&gpio1 {
+	gpio-line-names = /* GPIO1 A0-A7 */
+			  "HEADER_7", "HEADER_35", "HEADER_33", "HEADER_37",
+			  "HEADER_40", "HEADER_38", "", "",
+			  /* GPIO1 B0-B7 */
+			  "HEADER_11", "", "", "HEADER_29",
+			  "HEADER_31", "", "", "",
+			  /* GPIO1 C0-C7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO1 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = /* GPIO2 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 C0-C7 */
+			  "", "", "", "",
+			  "HEADER_27", "", "", "",
+			  /* GPIO2 D0-D7 */
+			  "", "", "HEADER_8", "HEADER_10",
+			  "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names = /* GPIO3 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO3 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO3 C0-C7 */
+			  "", "HEADER_32", "", "",
+			  "", "", "", "HEADER_12",
+			  /* GPIO3 D0-D7 */
+			  "", "", "", "HEADER_15",
+			  "", "", "", "";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
+&mdio {
+	phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		max-speed = <100>;
+		/* T2.2.4 min. 1 us */
+		reset-assert-us = <10>;
+		/* T2.2.1 + T2.2.2 + T2.2.3 min. 6.05 us */
+		reset-deassert-us = <20>;
+		reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp83848c_rst>;
+	};
+};
+
+&pinctrl {
+	dp83848c {
+		dp83848c_rst: dp83848c-rst {
+			rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		ir_int: ir-int {
+			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		power_led: power-led {
+			rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		spd_led: spd-led {
+			rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		host_drv: host-drv {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	vmmc-supply = <&vcc_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	vusb_a-supply = <&vcc_io>;
+	vusb_d-supply = <&vdd_11>;
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb2phy_host {
+	status = "okay";
+};
+
+&usb2phy_otg {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi
index 01edf244ddee..e2264c40b924 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3128-power.h>
 
 / {
 	compatible = "rockchip,rk3128";
@@ -15,6 +16,20 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
 	arm-pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -100,6 +115,27 @@
 		};
 	};
 
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <975000 975000 1250000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1050000 1050000 1250000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <1250000 1250000 1250000>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
@@ -130,9 +166,119 @@
 		};
 	};
 
+	gpu: gpu@10090000 {
+		compatible = "rockchip,rk3128-mali", "arm,mali-400";
+		reg = <0x10090000 0x10000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp",
+				  "gpmmu",
+				  "pp0",
+				  "ppmmu0",
+				  "pp1",
+				  "ppmmu1";
+		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+		clock-names = "bus", "core";
+		operating-points-v2 = <&gpu_opp_table>;
+		resets = <&cru SRST_GPU>;
+		power-domains = <&power RK3128_PD_GPU>;
+		status = "disabled";
+	};
+
 	pmu: syscon@100a0000 {
 		compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
 		reg = <0x100a0000 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3128-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@RK3128_PD_VIO {
+				reg = <RK3128_PD_VIO>;
+				clocks = <&cru ACLK_CIF>,
+					 <&cru HCLK_CIF>,
+					 <&cru DCLK_EBC>,
+					 <&cru HCLK_EBC>,
+					 <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>,
+					 <&cru ACLK_LCDC0>,
+					 <&cru HCLK_LCDC0>,
+					 <&cru PCLK_MIPI>,
+					 <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>,
+					 <&cru ACLK_VIO0>,
+					 <&cru ACLK_VIO1>,
+					 <&cru HCLK_VIO>,
+					 <&cru HCLK_VIO_H2P>,
+					 <&cru DCLK_VOP>,
+					 <&cru SCLK_VOP>;
+				pm_qos = <&qos_ebc>,
+					 <&qos_iep>,
+					 <&qos_lcdc>,
+					 <&qos_rga>,
+					 <&qos_vip>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3128_PD_VIDEO {
+				reg = <RK3128_PD_VIDEO>;
+				clocks = <&cru ACLK_VDPU>,
+					 <&cru HCLK_VDPU>,
+					 <&cru ACLK_VEPU>,
+					 <&cru HCLK_VEPU>,
+					 <&cru SCLK_HEVC_CORE>;
+				pm_qos = <&qos_vpu>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3128_PD_GPU {
+				reg = <RK3128_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	qos_gpu: qos@1012d000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012d000 0x20>;
+	};
+
+	qos_vpu: qos@1012e000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012e000 0x20>;
+	};
+
+	qos_rga: qos@1012f000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f000 0x20>;
+	};
+
+	qos_ebc: qos@1012f080 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f080 0x20>;
+	};
+
+	qos_iep: qos@1012f100 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f100 0x20>;
+	};
+
+	qos_lcdc: qos@1012f180 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f180 0x20>;
+	};
+
+	qos_vip: qos@1012f200 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f200 0x20>;
 	};
 
 	gic: interrupt-controller@10139000 {
@@ -154,6 +300,9 @@
 		clocks = <&cru HCLK_OTG>;
 		clock-names = "otg";
 		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
 		phys = <&usb2phy_otg>;
 		phy-names = "usb2-phy";
 		status = "disabled";
@@ -163,6 +312,7 @@
 		compatible = "generic-ehci";
 		reg = <0x101c0000 0x20000>;
 		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST2>;
 		phys = <&usb2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -172,6 +322,7 @@
 		compatible = "generic-ohci";
 		reg = <0x101e0000 0x20000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST2>;
 		phys = <&usb2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -261,6 +412,8 @@
 			clocks = <&cru SCLK_OTGPHY0>;
 			clock-names = "phyclk";
 			clock-output-names = "usb480m_phy";
+			assigned-clocks = <&cru SCLK_USB480M>;
+			assigned-clock-parents = <&usb2phy>;
 			#clock-cells = <0>;
 			status = "disabled";
 
@@ -518,6 +671,34 @@
 		#dma-cells = <1>;
 	};
 
+	gmac: ethernet@2008c000 {
+		compatible = "rockchip,rk3128-gmac";
+		reg = <0x2008c000 0x4000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru SCLK_MAC>,
+			 <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+			 <&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>,
+			 <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth",
+			      "mac_clk_rx", "mac_clk_tx",
+			      "clk_mac_ref", "clk_mac_refout",
+			      "aclk_mac", "pclk_mac";
+		resets = <&cru SRST_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		rx-fifo-depth = <4096>;
+		tx-fifo-depth = <2048>;
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3128-pinctrl";
 		rockchip,grf = <&grf>;
@@ -843,6 +1024,10 @@
 				rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
 			};
 
+			sdmmc_det: sdmmc-det {
+				rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>;
+			};
+
 			sdmmc_wp: sdmmc-wp {
 				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>;
 			};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi
index a721744cbfd1..831561fc1814 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi
@@ -15,6 +15,10 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi
index cb9cdaddffd4..ead343dc3df1 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi
@@ -19,6 +19,15 @@
 
 	aliases {
 		ethernet0 = &gmac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+		gpio8 = &gpio8;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3xxx.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
index cb4e42ede56a..f37137f298d5 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
@@ -16,6 +16,10 @@
 
 	aliases {
 		ethernet0 = &emac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi
index abf3006f0a84..f3291f3bbc6f 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi
@@ -196,7 +196,6 @@
 	pwm4: pwm@10280000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280000 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -208,7 +207,6 @@
 	pwm5: pwm@10280010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280010 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -220,7 +218,6 @@
 	pwm6: pwm@10280020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280020 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -232,7 +229,6 @@
 	pwm7: pwm@10280030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280030 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -386,7 +382,6 @@
 	pwm0: pwm@20040000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040000 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -398,7 +393,6 @@
 	pwm1: pwm@20040010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040010 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -410,7 +404,6 @@
 	pwm2: pwm@20040020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040020 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -422,7 +415,6 @@
 	pwm3: pwm@20040030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040030 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts
new file mode 100644
index 000000000000..45dced8087a3
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1109.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+	model = "Sonoff iHost 2G";
+	compatible = "itead,sonoff-ihost", "rockchip,rv1109";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rv1109.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1109.dtsi
new file mode 100644
index 000000000000..9cbaa08ab1b8
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1109.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rv1126.dtsi"
+
+/ {
+	compatible = "rockchip,rv1109";
+
+	cpus {
+		/delete-node/ cpu@f02;
+		/delete-node/ cpu@f03;
+	};
+
+	arm-pmu {
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts
index f09be8405964..0c2396b8f8db 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts
@@ -61,7 +61,7 @@
 	phy-mode = "rgmii";
 	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>;
+	pinctrl-0 = <&rgmiim1_miim &rgmiim1_bus2 &rgmiim1_bus4 &clk_out_ethernetm1_pins>;
 	tx_delay = <0x2a>;
 	rx_delay = <0x1a>;
 	status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
index bb34b0c9cb4a..06b1d7f2d858 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
@@ -87,6 +87,16 @@
 				<0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>;
 		};
 	};
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2_xfer: i2c2-xfer {
+			rockchip,pins =
+				/* i2c2_scl */
+				<0 RK_PC2 1 &pcfg_pull_none_drv_level_0_smt>,
+				/* i2c2_sda */
+				<0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>;
+		};
+	};
 	pwm2 {
 		/omit-if-no-ref/
 		pwm2m0_pins: pwm2m0-pins {
@@ -105,36 +115,56 @@
 	};
 	rgmii {
 		/omit-if-no-ref/
-		rgmiim1_pins: rgmiim1-pins {
+		rgmiim1_miim: rgmiim1-miim {
 			rockchip,pins =
 				/* rgmii_mdc_m1 */
 				<2 RK_PC2 2 &pcfg_pull_none>,
 				/* rgmii_mdio_m1 */
-				<2 RK_PC1 2 &pcfg_pull_none>,
-				/* rgmii_rxclk_m1 */
-				<2 RK_PD3 2 &pcfg_pull_none>,
+				<2 RK_PC1 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_rxer: rgmiim1-rxer {
+			rockchip,pins =
+				/* rgmii_rxer_m1 */
+				<2 RK_PC0 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_bus2: rgmiim1-bus2 {
+			rockchip,pins =
 				/* rgmii_rxd0_m1 */
 				<2 RK_PB5 2 &pcfg_pull_none>,
 				/* rgmii_rxd1_m1 */
 				<2 RK_PB6 2 &pcfg_pull_none>,
-				/* rgmii_rxd2_m1 */
-				<2 RK_PC7 2 &pcfg_pull_none>,
-				/* rgmii_rxd3_m1 */
-				<2 RK_PD0 2 &pcfg_pull_none>,
 				/* rgmii_rxdv_m1 */
 				<2 RK_PB4 2 &pcfg_pull_none>,
-				/* rgmii_txclk_m1 */
-				<2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd0_m1 */
 				<2 RK_PC3 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd1_m1 */
 				<2 RK_PC4 2 &pcfg_pull_none_drv_level_3>,
+				/* rgmii_txen_m1 */
+				<2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_bus4: rgmiim1-bus4 {
+			rockchip,pins =
+				/* rgmii_rxclk_m1 */
+				<2 RK_PD3 2 &pcfg_pull_none>,
+				/* rgmii_rxd2_m1 */
+				<2 RK_PC7 2 &pcfg_pull_none>,
+				/* rgmii_rxd3_m1 */
+				<2 RK_PD0 2 &pcfg_pull_none>,
+				/* rgmii_txclk_m1 */
+				<2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd2_m1 */
 				<2 RK_PD1 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd3_m1 */
-				<2 RK_PA4 2 &pcfg_pull_none_drv_level_3>,
-				/* rgmii_txen_m1 */
-				<2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+				<2 RK_PA4 2 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_mclkinout: rgmiim1-mclkinout {
+			rockchip,pins =
+				/* rgmii_clk_m1 */
+				<2 RK_PB7 2 &pcfg_pull_none>;
 		};
 	};
 	sdmmc0 {
@@ -263,6 +293,14 @@
 				/* uart3_tx_m0 */
 				<3 RK_PC6 4 &pcfg_pull_up>;
 		};
+		/omit-if-no-ref/
+		uart3m2_xfer: uart3m2-xfer {
+			rockchip,pins =
+				/* uart3_rx_m2 */
+				<3 RK_PA1 4 &pcfg_pull_up>,
+				/* uart3_tx_m2 */
+				<3 RK_PA0 4 &pcfg_pull_up>;
+		};
 	};
 	uart4 {
 		/omit-if-no-ref/
@@ -273,6 +311,14 @@
 				/* uart4_tx_m0 */
 				<3 RK_PA4 4 &pcfg_pull_up>;
 		};
+		/omit-if-no-ref/
+		uart4m2_xfer: uart4m2-xfer {
+			rockchip,pins =
+				/* uart4_rx_m2 */
+				<1 RK_PD4 3 &pcfg_pull_up>,
+				/* uart4_tx_m2 */
+				<1 RK_PD5 3 &pcfg_pull_up>;
+		};
 	};
 	uart5 {
 		/omit-if-no-ref/
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts
new file mode 100644
index 000000000000..77386a48d81e
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+	model = "Sonoff iHost 4G";
+	compatible = "itead,sonoff-ihost", "rockchip,rv1126";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
new file mode 100644
index 000000000000..32b329e87a0c
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sdio_pwrseq: pwrseq-sdio {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_npu_vepu: DCDC_REG1 {
+				regulator-name = "vdd_npu_vepu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcc_0v8: LDO_REG1 {
+				regulator-name = "vcc_0v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG2 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd0v8_pmu: LDO_REG3 {
+				regulator-name = "vcc0v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <800000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_dovdd: LDO_REG5 {
+				regulator-name = "vcc_dovdd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_dvdd: LDO_REG6 {
+				regulator-name = "vcc_dvdd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_avdd: LDO_REG7 {
+				regulator-name = "vcc_avdd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: LDO_REG9 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_5v0: SWITCH_REG1 {
+				regulator-name = "vcc_5v0";
+			};
+
+			vcc_3v3: SWITCH_REG2 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>,
+			  <&cru CLK_GMAC_TX_RX>;
+	assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>,
+				 <&cru RMII_MODE_CLK>;
+	assigned-clock-rates = <0>, <50000000>;
+	clock_in_out = "output";
+	phy-handle = <&phy>;
+	phy-mode = "rmii";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>;
+	status = "okay";
+};
+
+&mdio {
+	phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_rst>;
+		reset-active-low;
+		reset-assert-us = <50000>;
+		reset-deassert-us = <10000>;
+		reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		eth_phy_rst: eth-phy-rst {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+	bt {
+		bt_enable: bt-enable {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_dev: bt-wake-dev {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio0-supply = <&vcc1v8_pmu>;
+	pmuio1-supply = <&vcc3v3_sys>;
+	vccio1-supply = <&vcc_1v8>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_1v8>;
+	vccio4-supply = <&vcc_dovdd>;
+	vccio5-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_dovdd>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <100000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723ds-bt";
+		device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */
+		enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */
+		host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */
+		max-speed = <2000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3m2_xfer>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4m2_xfer>;
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rv1126.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1126.dtsi
index 9ccd1bad6229..bb603cae13df 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/rockchip/rv1126.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/rockchip/rv1126.dtsi
@@ -21,6 +21,13 @@
 
 	aliases {
 		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
 	};
 
 	cpus {
@@ -231,6 +238,20 @@
 		status = "disabled";
 	};
 
+	i2c2: i2c@ff400000 {
+		compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+		reg = <0xff400000 0x1000>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,grf = <&pmugrf>;
+		clocks = <&pmucru CLK_I2C2>, <&pmucru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	uart1: serial@ff410000 {
 		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
 		reg = <0xff410000 0x100>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/samsung/exynos4.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/samsung/exynos4.dtsi
index f775b9377a38..7f981b5c0d64 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/samsung/exynos4.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/samsung/exynos4.dtsi
@@ -203,16 +203,16 @@
 
 		camera: camera@11800000 {
 			compatible = "samsung,fimc";
+			ranges = <0x0 0x11800000 0xa0000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			fimc_0: fimc@11800000 {
+			fimc_0: fimc@0 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11800000 0x1000>;
+				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC0>,
 					 <&clock CLK_SCLK_FIMC0>;
@@ -223,9 +223,9 @@
 				status = "disabled";
 			};
 
-			fimc_1: fimc@11810000 {
+			fimc_1: fimc@10000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11810000 0x1000>;
+				reg = <0x00010000 0x1000>;
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC1>,
 					 <&clock CLK_SCLK_FIMC1>;
@@ -236,9 +236,9 @@
 				status = "disabled";
 			};
 
-			fimc_2: fimc@11820000 {
+			fimc_2: fimc@20000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11820000 0x1000>;
+				reg = <0x00020000 0x1000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC2>,
 					 <&clock CLK_SCLK_FIMC2>;
@@ -249,9 +249,9 @@
 				status = "disabled";
 			};
 
-			fimc_3: fimc@11830000 {
+			fimc_3: fimc@30000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11830000 0x1000>;
+				reg = <0x00030000 0x1000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC3>,
 					 <&clock CLK_SCLK_FIMC3>;
@@ -262,9 +262,9 @@
 				status = "disabled";
 			};
 
-			csis_0: csis@11880000 {
+			csis_0: csis@80000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11880000 0x4000>;
+				reg = <0x00080000 0x4000>;
 				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS0>,
 					 <&clock CLK_SCLK_CSIS0>;
@@ -278,9 +278,9 @@
 				#size-cells = <0>;
 			};
 
-			csis_1: csis@11890000 {
+			csis_1: csis@90000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11890000 0x4000>;
+				reg = <0x00090000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS1>,
 					 <&clock CLK_SCLK_CSIS1>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts linux-libre-6.8-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
index a9ec1f6c1dea..0d8495792a70 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
@@ -184,6 +184,28 @@
 		};
 	};
 
+	i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpk1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpk1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+
+		touchscreen@20 {
+			compatible = "cypress,aries-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&gpl0>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+			vdd-supply = <&vtouchled_reg>;
+			vcc-supply = <&vtouch_reg>;
+			linux,keycodes = <KEY_MENU>, <KEY_BACK>;
+		};
+	};
+
 	spi-3 {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
@@ -380,6 +402,23 @@
 	vusb_a-supply = <&vusbdac_reg>;
 };
 
+&i2c_1 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	lis3dh: accelerometer@19 {
+		compatible = "st,lis3dh-accel";
+		reg = <0x19>;
+
+		mount-matrix = "0", "-1", "0",
+			       "1", "0", "0",
+			       "0", "0", "1";
+	};
+};
+
 &i2c_3 {
 	status = "okay";
 
@@ -513,7 +552,6 @@
 				regulator-name = "TOUCH_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
 			};
 
 			vpll_reg: LDO10 {
@@ -527,6 +565,14 @@
 				regulator-name = "VT_CAM_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+
+				/*
+				 * Force-enable this regulator; otherwise the
+				 * kernel hangs very early in the boot process
+				 * for about 12 seconds, without apparent
+				 * reason.
+				 */
+				regulator-always-on;
 			};
 
 			vcclcd_reg: LDO13 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
index d7954ff466b4..e5254e32aa8f 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
@@ -434,6 +434,7 @@
 };
 
 &fimd {
+	samsung,invert-vclk;
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/samsung/exynos4x12.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/samsung/exynos4x12.dtsi
index 84c1db221c98..b4b5e769145b 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/samsung/exynos4x12.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/samsung/exynos4x12.dtsi
@@ -451,14 +451,15 @@
 };
 
 &camera {
+	ranges = <0x0 0x11800000 0xba1000>;
 	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
 		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
 	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
 
 	/* fimc_[0-3] are configured outside, under phandles */
-	fimc_lite_0: fimc-lite@12390000 {
+	fimc_lite_0: fimc-lite@b90000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x12390000 0x1000>;
+		reg = <0x00b90000 0x1000>;
 		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
@@ -467,9 +468,9 @@
 		status = "disabled";
 	};
 
-	fimc_lite_1: fimc-lite@123a0000 {
+	fimc_lite_1: fimc-lite@ba0000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123a0000 0x1000>;
+		reg = <0x00ba0000 0x1000>;
 		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
@@ -478,9 +479,9 @@
 		status = "disabled";
 	};
 
-	fimc_is: fimc-is@12000000 {
+	fimc_is: fimc-is@800000 {
 		compatible = "samsung,exynos4212-fimc-is";
-		reg = <0x12000000 0x260000>;
+		reg = <0x00800000 0x260000>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
@@ -516,18 +517,15 @@
 		iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
 			 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
 		iommu-names = "isp", "drc", "fd", "mcuctl";
+		samsung,pmu-syscon = <&pmu_system_controller>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		status = "disabled";
 
-		pmu@10020000 {
-			reg = <0x10020000 0x3000>;
-		};
-
-		i2c1_isp: i2c-isp@12140000 {
+		i2c1_isp: i2c-isp@940000 {
 			compatible = "samsung,exynos4212-i2c-isp";
-			reg = <0x12140000 0x100>;
+			reg = <0x00940000 0x100>;
 			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
 			clock-names = "i2c_isp";
 			#address-cells = <1>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/samsung/s5pv210.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/samsung/s5pv210.dtsi
index f7de5b5f2f38..ed560c9a3aa1 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/samsung/s5pv210.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/samsung/s5pv210.dtsi
@@ -549,17 +549,17 @@
 
 		camera: camera@fa600000 {
 			compatible = "samsung,fimc";
+			ranges = <0x0 0xfa600000 0xe01000>;
 			clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
 			clock-names = "sclk_cam0", "sclk_cam1";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			csis0: csis@fa600000 {
+			csis0: csis@0 {
 				compatible = "samsung,s5pv210-csis";
-				reg = <0xfa600000 0x4000>;
+				reg = <0x00000000 0x4000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
@@ -572,9 +572,9 @@
 				#size-cells = <0>;
 			};
 
-			fimc0: fimc@fb200000 {
+			fimc0: fimc@c00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb200000 0x1000>;
+				reg = <0x00c00000 0x1000>;
 				interrupts = <5>;
 				interrupt-parent = <&vic2>;
 				clocks = <&clocks CLK_FIMC0>,
@@ -586,9 +586,9 @@
 				samsung,cam-if;
 			};
 
-			fimc1: fimc@fb300000 {
+			fimc1: fimc@d00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb300000 0x1000>;
+				reg = <0x00d00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <6>;
 				clocks = <&clocks CLK_FIMC1>,
@@ -602,9 +602,9 @@
 				samsung,lcd-wb;
 			};
 
-			fimc2: fimc@fb400000 {
+			fimc2: fimc@e00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb400000 0x1000>;
+				reg = <0x00e00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <7>;
 				clocks = <&clocks CLK_FIMC2>,
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-dbx5x0.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
index d5d88771ef97..0f87abeddc33 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
@@ -425,7 +425,7 @@
 		gpio0: gpio@8012e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8012e000 0x80>;
+			reg = <0x8012e000 0x80>;
 			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -440,7 +440,7 @@
 		gpio1: gpio@8012e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8012e080 0x80>;
+			reg = <0x8012e080 0x80>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -455,7 +455,7 @@
 		gpio2: gpio@8000e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e000 0x80>;
+			reg = <0x8000e000 0x80>;
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -470,7 +470,7 @@
 		gpio3: gpio@8000e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e080 0x80>;
+			reg = <0x8000e080 0x80>;
 			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -485,7 +485,7 @@
 		gpio4: gpio@8000e100 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e100 0x80>;
+			reg = <0x8000e100 0x80>;
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -500,7 +500,7 @@
 		gpio5: gpio@8000e180 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e180 0x80>;
+			reg = <0x8000e180 0x80>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -515,7 +515,7 @@
 		gpio6: gpio@8011e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8011e000 0x80>;
+			reg = <0x8011e000 0x80>;
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -530,7 +530,7 @@
 		gpio7: gpio@8011e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8011e080 0x80>;
+			reg = <0x8011e080 0x80>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -545,7 +545,7 @@
 		gpio8: gpio@a03fe000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0xa03fe000 0x80>;
+			reg = <0xa03fe000 0x80>;
 			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-href-ab8500.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-href-ab8500.dtsi
index e1de9d389a01..5eeb44c5e932 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-href-ab8500.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-href-ab8500.dtsi
@@ -9,6 +9,54 @@
 	soc {
 		prcmu@80157000 {
 			ab8500 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				regulator {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+
 				gpio {
 					/* Hog a few default settings */
 					pinctrl-names = "default";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-href-ab8505.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-href-ab8505.dtsi
new file mode 100644
index 000000000000..268db68ccf87
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-href-ab8505.dtsi
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2023 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include "ste-ab8505.dtsi"
+
+/ {
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				regulator {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+
+				gpio {
+					/* Hog a few default settings */
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio2_default_mode>,
+						    <&gpio4_default_mode>,
+						    <&gpio10_default_mode>,
+						    <&gpio11_default_mode>,
+						    <&gpio12_default_mode>,
+						    <&gpio13_default_mode>,
+						    <&gpio16_default_mode>,
+						    <&gpio24_default_mode>,
+						    <&gpio25_default_mode>,
+						    <&gpio36_default_mode>,
+						    <&gpio37_default_mode>,
+						    <&gpio38_default_mode>,
+						    <&gpio39_default_mode>,
+						    <&gpio42_default_mode>,
+						    <&gpio26_default_mode>,
+						    <&gpio35_default_mode>,
+						    <&ycbcr_default_mode>,
+						    <&pwm_default_mode>,
+						    <&adi1_default_mode>,
+						    <&usbuicc_default_mode>,
+						    <&dmic_default_mode>,
+						    <&extcpena_default_mode>,
+						    <&modsclsda_default_mode>;
+
+					/*
+					 * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
+					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
+					 */
+					gpio2 {
+						gpio2_default_mode: gpio2_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio2_a_1";
+							};
+							default_cfg {
+								pins = "GPIO2_T9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio4 {
+						gpio4_default_mode: gpio4_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio4_a_1";
+							};
+							default_cfg {
+								pins = "GPIO4_W2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio10 {
+						gpio10_default_mode: gpio10_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio10_d_1";
+							};
+							default_cfg {
+								pins = "GPIO10_U17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio11 {
+						gpio11_default_mode: gpio11_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio11_d_1";
+							};
+							default_cfg {
+								pins = "GPIO11_AA18";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio12 {
+						gpio12_default_mode: gpio12_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio12_d_1";
+							};
+							default_cfg {
+								pins = "GPIO12_U16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio13 {
+						gpio13_default_mode: gpio13_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio13_d_1";
+							};
+							default_cfg {
+								pins = "GPIO13_W17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio16 {
+						gpio16_default_mode: gpio16_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio16_a_1";
+							};
+							default_cfg {
+								pins = "GPIO16_F15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio24 {
+						gpio24_default_mode: gpio24_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio24_a_1";
+							};
+							default_cfg {
+								pins = "GPIO24_T14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio25 {
+						gpio25_default_mode: gpio25_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio25_a_1";
+							};
+							default_cfg {
+								pins = "GPIO25_R16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio36 {
+						gpio36_default_mode: gpio36_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio36_a_1";
+							};
+							default_cfg {
+								pins = "GPIO36_A17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio37 {
+						gpio37_default_mode: gpio37_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio37_a_1";
+							};
+							default_cfg {
+								pins = "GPIO37_E15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio38 {
+						gpio38_default_mode: gpio38_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio38_a_1";
+							};
+							default_cfg {
+								pins = "GPIO38_C17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio39 {
+						gpio39_default_mode: gpio39_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio39_a_1";
+							};
+							default_cfg {
+								pins = "GPIO39_E16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio42 {
+						gpio42_default_mode: gpio42_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio42_a_1";
+							};
+							default_cfg {
+								pins = "GPIO42_U2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
+					 */
+					gpio26 {
+						gpio26_default_mode: gpio26_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio26_d_1";
+							};
+							default_cfg {
+								pins = "GPIO26_M16";
+								output-low;
+							};
+						};
+					};
+					gpio35 {
+						gpio35_default_mode: gpio35_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio35_d_1";
+							};
+							default_cfg {
+								pins = "GPIO35_W15";
+								output-low;
+							};
+						};
+					};
+					/*
+					 * This sets up the YCBCR connector pins, i.e. analog video out.
+					 * Set as input with no bias.
+					 */
+					ycbcr {
+						ycbcr_default_mode: ycbcr_default {
+							default_mux {
+								function = "ycbcr";
+								groups = "ycbcr0123_d_1";
+							};
+							default_cfg {
+								pins = "GPIO6_Y18",
+									 "GPIO7_AA20",
+									 "GPIO8_W18",
+									 "GPIO9_AA19";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					/* This sets up the PWM pins 14 and 15 */
+					pwm {
+						pwm_default_mode: pwm_default {
+							default_mux {
+								function = "pwmout";
+								groups = "pwmout1_d_1", "pwmout2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO14_F14",
+									 "GPIO15_B17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up audio interface 1 */
+					adi1 {
+						adi1_default_mode: adi1_default {
+							default_mux {
+								function = "adi1";
+								groups = "adi1_d_1";
+							};
+							default_cfg {
+								pins = "GPIO17_P5",
+									 "GPIO18_R5",
+									 "GPIO19_U5",
+									 "GPIO20_T5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the USB UICC pins */
+					usbuicc {
+						usbuicc_default_mode: usbuicc_default {
+							default_mux {
+								function = "usbuicc";
+								groups = "usbuicc_d_1";
+							};
+							default_cfg {
+								pins = "GPIO21_H19",
+									 "GPIO22_G20",
+									 "GPIO23_G19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the microphone pins */
+					dmic {
+						dmic_default_mode: dmic_default {
+							default_mux {
+								function = "dmic";
+								groups = "dmic12_d_1",
+									 "dmic34_d_1",
+									 "dmic56_d_1";
+							};
+							default_cfg {
+								pins = "GPIO27_J6",
+									 "GPIO28_K6",
+									 "GPIO29_G6",
+									 "GPIO30_H6",
+									 "GPIO31_F5",
+									 "GPIO32_G5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					extcpena {
+						extcpena_default_mode: extcpena_default {
+							default_mux {
+								function = "extcpena";
+								groups = "extcpena_d_1";
+							};
+							default_cfg {
+								pins = "GPIO34_R17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* Modem I2C setup (SCL and SDA pins) */
+					modsclsda {
+						modsclsda_default_mode: modsclsda_default {
+							default_mux {
+								function = "modsclsda";
+								groups = "modsclsda_d_1";
+							};
+							default_cfg {
+								pins = "GPIO40_T19",
+									"GPIO41_U19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Clock output pins associated with regulators.
+					 */
+					sysclkreq2 {
+						sysclkreq2_default_mode: sysclkreq2_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq2_sleep_mode: sysclkreq2_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio1_a_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					sysclkreq4 {
+						sysclkreq4_default_mode: sysclkreq4_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq4_d_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq4_sleep_mode: sysclkreq4_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio3_a_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+				};
+				/*
+				 * Charging is not working on the HREF unless an actual battery is
+				 * mounted, most HREFs have a DC cable in to the "battery power"
+				 * which means this will only be cofusing. So do not enable charging
+				 * of the HREFs.
+				 */
+				ab8500_fg {
+					status = "disabled";
+				};
+				ab8500_btemp {
+					status = "disabled";
+				};
+				ab8500_charger {
+					status = "disabled";
+				};
+				ab8500_chargalg {
+					status = "disabled";
+				};
+			};
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-href.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-href.dtsi
index 13b11dbeba1c..fbf0309e108f 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-href.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-href.dtsi
@@ -242,61 +242,6 @@
 			status = "okay";
 		};
 
-		prcmu@80157000 {
-			ab8500 {
-				gpio {
-				};
-
-				phy {
-					pinctrl-names = "default", "sleep";
-					pinctrl-0 = <&usb_a_1_default>;
-					pinctrl-1 = <&usb_a_1_sleep>;
-				};
-
-				regulator {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-
 		pinctrl {
 			sdi0 {
 				sdi0_default_mode: sdi0_default {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-href520-tvk.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-href520-tvk.dts
index 7f661f8f13ad..5677df43c3ac 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-href520-tvk.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-href520-tvk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8520.dtsi"
+#include "ste-href-ab8505.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-tvk1281618-r3.dtsi"
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
index a29e345a43d3..b142bb2d38d8 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefprev60.dtsi"
 #include "ste-href-stuib.dtsi"
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
index 1968bd143114..5da1ff41b00e 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefprev60.dtsi"
 #include "ste-href-tvk1281618-r2.dtsi"
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-hrefprev60.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-hrefprev60.dtsi
index 9859ee91a15e..c87fd27b4434 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-hrefprev60.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-hrefprev60.dtsi
@@ -62,7 +62,7 @@
 
 		// External Micro SD slot
 		mmc@80126000 {
-			cd-gpios  = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		pinctrl {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
index 7a5b6aa1db5b..c4abe24a7cd0 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-stuib.dtsi"
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
index d5af3f375161..f55e8de2b516 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-tvk1281618-r2.dtsi"
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi
index e66fa59c2de6..b23966c16a32 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi
@@ -3,7 +3,6 @@
  * Copyright 2012 ST-Ericsson AB
  */
 
-#include "ste-href-ab8500.dtsi"
 #include "ste-href.dtsi"
 
 / {
@@ -191,7 +190,7 @@
 
 		// External Micro SD slot
 		mmc@80126000 {
-			cd-gpios  = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
+			cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
 		};
 
 		pinctrl {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi
index 6816eef39d45..4d37c5fb553c 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi
@@ -52,7 +52,7 @@
 
 	gpio0: gpio@101e4000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e4000 0x80>;
+		reg = <0x101e4000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <6>;
 		interrupt-controller;
@@ -66,7 +66,7 @@
 
 	gpio1: gpio@101e5000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e5000 0x80>;
+		reg = <0x101e5000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <7>;
 		interrupt-controller;
@@ -80,7 +80,7 @@
 
 	gpio2: gpio@101e6000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e6000 0x80>;
+		reg = <0x101e6000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <8>;
 		interrupt-controller;
@@ -94,7 +94,7 @@
 
 	gpio3: gpio@101e7000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e7000 0x80>;
+		reg = <0x101e7000 0x80>;
 		ngpio = <28>;
 		interrupt-parent = <&vica>;
 		interrupts = <9>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-snowball.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-snowball.dts
index 27c2ec51e732..1322abfc7acf 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-snowball.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-snowball.dts
@@ -266,7 +266,7 @@
 			pinctrl-1 = <&mc0_a_1_sleep>;
 
 			/* GPIO218 MMC_CD */
-			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
+			cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
 
 			status = "okay";
 		};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
index 463942ae755e..c623cc35c5ea 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
@@ -310,7 +310,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
index c1ae0e23fe45..2355ca6e9ad6 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
@@ -402,7 +402,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts
index b21e40da3dfd..ad9a20ccaaeb 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts
@@ -362,7 +362,7 @@
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
 			/* "flash detect" actually card detect */
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>;
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>;
 			status = "okay";
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
index 6e586e875565..229f7c32103c 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
@@ -412,7 +412,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts
index ba4421080b2a..cdb147dcc1db 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts
@@ -238,7 +238,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_1_default>;
 			pinctrl-1 = <&mc0_a_1_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32429i-eval.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32429i-eval.dts
index 576235ec3c51..afa417b34b25 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32429i-eval.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32429i-eval.dts
@@ -222,7 +222,6 @@
 		reg = <0x42>;
 		interrupts = <8 3>;
 		interrupt-parent = <&gpioi>;
-		interrupt-controller;
 		wakeup-source;
 
 		stmpegpio: stmpe_gpio {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32f469-disco.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32f469-disco.dts
index cbbd521bf010..8a4f8ddd083d 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32f469-disco.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32f469-disco.dts
@@ -69,16 +69,9 @@
 		serial0 = &usart3;
 	};
 
-	mmc_vcard: mmc_vcard {
+	vcc_3v3: vcc-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc_vcard";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vdd_dsi: vdd-dsi {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_dsi";
+		regulator-name = "vcc_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
@@ -164,7 +157,7 @@
 		compatible = "orisetech,otm8009a";
 		reg = <0>; /* dsi virtual channel (0..3) */
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_dsi>;
+		power-supply = <&vcc_3v3>;
 		status = "okay";
 
 		port {
@@ -219,7 +212,7 @@
 
 &sdio {
 	status = "okay";
-	vmmc-supply = <&mmc_vcard>;
+	vmmc-supply = <&vcc_3v3>;
 	cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
 	broken-cd;
 	pinctrl-names = "default", "opendrain";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32f746.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32f746.dtsi
index 53a8e2dec9a4..65c72b6fcc83 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32f746.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32f746.dtsi
@@ -274,6 +274,26 @@
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
 		};
 
+		spi2: spi@40003800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40003800 0x400>;
+			interrupts = <36>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI2)>;
+			status = "disabled";
+		};
+
+		spi3: spi@40003c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40003c00 0x400>;
+			interrupts = <51>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI3)>;
+			status = "disabled";
+		};
+
 		usart2: serial@40004400 {
 			compatible = "st,stm32f7-uart";
 			reg = <0x40004400 0x400>;
@@ -491,9 +511,30 @@
 			status = "disabled";
 		};
 
+		spi1: spi@40013000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40013000 0x400>;
+			interrupts = <35>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI1)>;
+			status = "disabled";
+		};
+
+		spi4: spi@40013400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40013400 0x400>;
+			interrupts = <84>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI4)>;
+			status = "disabled";
+		};
+
 		syscfg: syscon@40013800 {
 			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x40013800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SYSCFG)>;
 		};
 
 		exti: interrupt-controller@40013c00 {
@@ -554,6 +595,26 @@
 			};
 		};
 
+		spi5: spi@40015000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40015000 0x400>;
+			interrupts = <85>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI5)>;
+			status = "disabled";
+		};
+
+		spi6: spi@40015400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40015400 0x400>;
+			interrupts = <86>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI6)>;
+			status = "disabled";
+		};
+
 		ltdc: display-controller@40016800 {
 			compatible = "st,stm32-ltdc";
 			reg = <0x40016800 0x200>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp135.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp135.dtsi
index abf2acd37b4e..68d32f9f5314 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp135.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp135.dtsi
@@ -8,5 +8,16 @@
 
 / {
 	soc {
+		dcmipp: dcmipp@5a000000 {
+			compatible = "st,stm32mp13-dcmipp";
+			reg = <0x5a000000 0x400>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc DCMIPP_R>;
+			clocks = <&rcc DCMIPP_K>;
+			status = "disabled";
+
+			port {
+			};
+		};
 	};
 };
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
index 61508917521c..fa4cbd312e5a 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -1521,6 +1521,8 @@
 			clocks = <&usbphyc>, <&rcc USBH>;
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphyc_port0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -1531,6 +1533,8 @@
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			companion = <&usbh_ohci>;
+			phys = <&usbphyc_port0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
index dd23de85100c..3938d357e198 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
@@ -206,8 +206,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
index afcd6285890c..ce5937270aa1 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
-	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157";
+	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
@@ -59,7 +59,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi
index 5f85598cc7c6..5c1cc48e5199 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi
@@ -313,8 +313,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
index 39358d902000..c20a73841c1f 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
-	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
+	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
@@ -65,7 +65,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
index 510cca5acb79..7a701f7ef0c7 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
@@ -64,7 +64,6 @@
 		reg = <0x38>;
 		interrupts = <2 2>;
 		interrupt-parent = <&gpiof>;
-		interrupt-controller;
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <800>;
 		status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
index 07ea765a4553..5e2eaf57ce22 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
-	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
+	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
@@ -64,7 +64,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
index f928cfb80b87..4792004cab0c 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
@@ -500,14 +500,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
index 813086ec2489..3226fb945a8e 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
@@ -11,8 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
-	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1",
-		     "st,stm32mp157";
+	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
@@ -70,7 +69,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
index cd9c3ff5378b..9eb9a1bf4f2c 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
@@ -362,7 +362,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts
index bd67a1db9122..527c33be66cc 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts
@@ -197,14 +197,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
index 4e8b2d2b30c7..bf0c32027baf 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
@@ -547,14 +547,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
index f09b7c384bd9..fc3a2386dbb9 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
@@ -567,9 +567,6 @@ baseboard_eeprom: &sip_eeprom {
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
-
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
index 35b1034aa3cf..bb4f8a0b937f 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
@@ -152,7 +152,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
index 46b87a27d8b3..466d9701add0 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -305,7 +305,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
index abc595350e71..b5bc53accd6b 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
@@ -119,12 +119,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
index 0069ad75d55e..343a4613dfca 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
@@ -489,8 +489,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi
index 92d906bfd5d7..bc4ddcbdd5cf 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi
@@ -312,12 +312,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi
index ab7f0ba49639..6e79c4b6fe32 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi
@@ -168,12 +168,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
index 511113f2e399..f7634c51efb2 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
@@ -680,7 +680,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
index bff73a0ed10b..5c88a90903b8 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
@@ -36,9 +36,9 @@ qmss: qmss@2a40000 {
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <528 16>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts linux-libre-6.8-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
index 7bfc80f1af26..f0ddbbcdc972 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
@@ -9,7 +9,7 @@
 #include "keystone-k2g.dtsi"
 
 / {
-	compatible =  "ti,k2g-evm", "ti,k2g", "ti,keystone";
+	compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone";
 	model = "Texas Instruments K2G General Purpose EVM";
 
 	memory@800000000 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
index f6306933ff42..7109ca031617 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
@@ -37,9 +37,9 @@ qmss: qmss@4020000 {
 		qpend {
 			qpend-0 {
 				qrange = <77 8>;
-				interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04
-					     0 311 0xf04 0 312 0xf04 0 313 0xf04
-					     0 314 0xf04 0 315 0xf04>;
+				interrupts = <0 308 0xf04 0 309 0xf04 0 310 0xf04
+					      0 311 0xf04 0 312 0xf04 0 313 0xf04
+					      0 314 0xf04 0 315 0xf04>;
 				qalloc-by-id;
 			};
 		};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts linux-libre-6.8-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
index 206df8a8d9dd..8dfb54295027 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
@@ -10,7 +10,7 @@
 #include "keystone-k2hk.dtsi"
 
 / {
-	compatible =  "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
+	compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
 	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
 
 	reserved-memory {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
index 8a421c65f920..c2ee775eab6a 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
@@ -49,9 +49,9 @@ qmss: qmss@2a40000 {
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <8704 16>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
index 5ec6680a533d..1afebd7458c1 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
@@ -36,9 +36,9 @@ qmss: qmss@2a40000 {
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <528 16>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/Makefile linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/Makefile
index d2b590004fed..95c68135dd0c 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/Makefile
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/Makefile
@@ -79,7 +79,9 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-sdp.dtb \
 	omap4-sdp-es23plus.dtb \
 	omap4-var-dvk-om44.dtb \
-	omap4-var-stk-om44.dtb
+	omap4-var-stk-om44.dtb \
+	omap4-xyboard-mz609.dtb \
+	omap4-xyboard-mz617.dtb
 dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-baltos-ir2110.dtb \
 	am335x-baltos-ir3220.dtb \
@@ -129,6 +131,16 @@ dtb-$(CONFIG_SOC_AM43XX) += \
 am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo
 am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo
 
+am571x-idk-overlays-dtbs := am571x-idk.dtb \
+	am571x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2587.dtbo
+am572x-idk-overlays-dtbs := am572x-idk.dtb \
+	am572x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2045.dtbo
+
+# Build time test only, enabled by CONFIG_OF_ALL_DTBS
+dtb- += \
+	am571x-idk-overlays.dtb \
+	am572x-idk-overlays.dtb
+
 dtb-$(CONFIG_SOC_DRA7XX) += \
 	am57xx-beagle-x15.dtb \
 	am57xx-beagle-x15-revb1.dtb \
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
index b8730aa52ce6..a59331aa58e5 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
@@ -217,7 +217,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_pins>;
 
-	tpm_spi_tis@0 {
+	tpm@0 {
 		compatible = "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <500000>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/am571x-idk.dts linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/am571x-idk.dts
index 48425020281a..322cf79d22e9 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/am571x-idk.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/am571x-idk.dts
@@ -168,8 +168,8 @@
 };
 
 &extcon_usb2 {
-	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+	id-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
 };
 
 &sn65hvs882 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
index 9a234dc1431d..3e834fc7e370 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
@@ -197,7 +197,7 @@
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
 		ti,enable-id-detection;
-		id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -415,7 +415,6 @@
 		reg = <0x41>;
 		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
-		interrupt-controller;
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi
index 1d66278c3a72..3fca84819dc0 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi
@@ -169,8 +169,8 @@
 };
 
 &extcon_usb2 {
-	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+	id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
 };
 
 &sn65hvs882 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi
index 4cdffd6db740..ed5199d7acd8 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi
@@ -15,12 +15,12 @@
 
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb2: extcon_usb2 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	sound0: sound0 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/dra71-evm.dts linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/dra71-evm.dts
index a64364443031..f747ac56eb92 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/dra71-evm.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/dra71-evm.dts
@@ -293,11 +293,11 @@
 };
 
 &extcon_usb1 {
-	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
 };
 
 &extcon_usb2 {
-	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
 };
 
 &ipu2 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi
index 31ab0c60ca75..f8151c61488e 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi
@@ -96,12 +96,12 @@
 
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb2: extcon_usb2 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	hdmi0: connector {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/dra76-evm.dts linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/dra76-evm.dts
index 57868ac60d29..cf9c3d35b049 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/dra76-evm.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/dra76-evm.dts
@@ -533,11 +533,11 @@
 };
 
 &extcon_usb1 {
-	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
 };
 
 &extcon_usb2 {
-	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
 };
 
 &m_can0 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts
index 533ce7ce387a..fbff15a0a0fe 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts
@@ -52,7 +52,7 @@
 
 &uart2 {
 	/delete-property/dma-names;
-	bluetooth {
+	bluetooth-gnss {
 		compatible = "ti,wl1283-st";
 		enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */
 		max-speed = <3000000>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
index a2bb3609c94f..a0c53d9c2625 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
@@ -6,15 +6,6 @@
 #include "motorola-cpcap-mapphone.dtsi"
 
 / {
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &hdmi0;
-	};
-
 	/*
 	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
 	 * then 1023 - 1024 seems to contain mbm.
@@ -63,46 +54,6 @@
 		regulator-always-on;
 	};
 
-	/* FS USB Host PHY on port 1 for mdm6600 */
-	fsusb1_phy: usb-phy@1 {
-		compatible = "motorola,mapphone-mdm6600";
-		pinctrl-0 = <&usb_mdm6600_pins>;
-		pinctrl-1 = <&usb_mdm6600_sleep_pins>;
-		pinctrl-names = "default", "sleep";
-		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
-		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
-		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
-		/* mode: gpio_148 gpio_149 */
-		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
-				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
-		/* cmd: gpio_103 gpio_104 gpio_142 */
-		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
-				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
-				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
-		/* status: gpio_52 gpio_53 gpio_55 */
-		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
-					<&gpio2 21 GPIO_ACTIVE_HIGH>,
-					<&gpio2 23 GPIO_ACTIVE_HIGH>;
-		#phy-cells = <0>;
-	};
-
-	/* HS USB host TLL nop-phy on port 2 for w3glte */
-	hsusb2_phy: usb-phy@2 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	/* LCD regulator from sw5 source */
-	lcd_regulator: regulator-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd";
-		regulator-min-microvolt = <5050000>;
-		regulator-max-microvolt = <5050000>;
-		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
-		enable-active-high;
-		vin-supply = <&sw5>;
-	};
-
 	/* This is probably coming straight from the battery.. */
 	wl12xx_vmmc: regulator-wl12xx {
 		compatible = "regulator-fixed";
@@ -133,41 +84,6 @@
 
 		dais = <&mcbsp2_port>, <&mcbsp3_port>;
 	};
-
-	pwm8: pwm-8 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_direction_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer8>;
-		ti,clock-source = <0x01>;
-	};
-
-	pwm9: pwm-9 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_enable_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x01>;
-	};
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
-		pwm-names = "enable", "direction";
-		direction-duty-cycle-ns = <10000000>;
-	};
-
-	backlight: backlight {
-		compatible = "led-backlight";
-
-		leds = <&backlight_led>;
-		brightness-levels = <31 63 95 127 159 191 223 255>;
-		default-brightness-level = <6>;
-	};
 };
 
 &cpu_thermal {
@@ -197,57 +113,6 @@
 	status = "okay";
 };
 
-&dsi1 {
-	status = "okay";
-	vdd-supply = <&vcsi>;
-
-	port {
-		dsi1_out_ep: endpoint {
-			remote-endpoint = <&lcd0_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd0: panel@0 {
-		compatible = "motorola,droid4-panel", "panel-dsi-cm";
-		reg = <0>;
-		label = "lcd0";
-		vddi-supply = <&lcd_regulator>;
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
-
-		backlight = <&backlight>;
-
-		width-mm = <50>;
-		height-mm = <89>;
-		rotation = <90>;
-
-		panel-timing {
-			clock-frequency = <0>;		/* Calculated by dsi */
-
-			hback-porch = <2>;
-			hactive = <540>;
-			hfront-porch = <0>;
-			hsync-len = <2>;
-
-			vback-porch = <1>;
-			vactive = <960>;
-			vfront-porch = <0>;
-			vsync-len = <1>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd0_in: endpoint {
-				remote-endpoint = <&dsi1_out_ep>;
-			};
-		};
-	};
-};
-
 &hdmi {
 	status = "okay";
 	pinctrl-0 = <&dss_hdmi_pins>;
@@ -262,13 +127,6 @@
 	};
 };
 
-/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
-&hdqw1w {
-	pinctrl-0 = <&hdq_pins>;
-	pinctrl-names = "default";
-	ti,mode = "1w";
-};
-
 &i2c1 {
 	tmp105@48 {
 		compatible = "ti,tmp105";
@@ -322,34 +180,6 @@
 	};
 };
 
-&i2c2 {
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchscreen_pins>;
-
-		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
-
-		/* gpio_183 with sys_nirq2 pad as wakeup */
-		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
-				      <&omap4_pmx_core 0x160>;
-		interrupt-names = "irq", "wakeup";
-		wakeup-source;
-	};
-
-	isl29030@44 {
-		compatible = "isil,isl29030";
-		reg = <0x44>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&als_proximity_pins>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
-	};
-};
-
 &omap4_pmx_core {
 
 	/* hdmi_hpd.gpio_63 */
@@ -359,13 +189,6 @@
 		>;
 	};
 
-	hdq_pins: hdq-pins {
-		pinctrl-single,pins = <
-		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
-		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
-		>;
-	};
-
 	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
 	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
@@ -427,73 +250,6 @@
 		>;
 	};
 
-	touchscreen_pins: touchscreen-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	als_proximity_pins: als-proximity-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	usb_mdm6600_pins: usb-mdm6600-pins {
-		pinctrl-single,pins = <
-		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
-		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-
-		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
-		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-
-		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
-		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
-		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
-		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-
-		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
-		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-
-		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
-		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-
-		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
-		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-
-		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
-		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
-		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
-		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
-	/* Modem sleep pins to keep gpio_49 high with internal pull */
-	usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
-		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
 	usb_ulpi_pins: usb-ulpi-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x196, MUX_MODE7)
@@ -601,18 +357,6 @@
 		OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_fsx */
 		>;
 	};
-
-	vibrator_direction_pin: vibrator-direction-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
-		>;
-	};
-
-	vibrator_enable_pin: vibrator-enable-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
-		>;
-	};
 };
 
 &omap4_pmx_wkup {
@@ -629,17 +373,6 @@
 	status = "disabled";
 };
 
-/* Configure pwm clock source for timers 8 & 9 */
-&timer8 {
-	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_32k_ck>;
-};
-
-&timer9 {
-	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_32k_ck>;
-};
-
 /*
  * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
  * for wake-up events for both the USB PHY and the UART. We can use gpio_149
@@ -672,20 +405,6 @@
 	};
 };
 
-&usbhsohci {
-	phys = <&fsusb1_phy>;
-	phy-names = "usb";
-};
-
-&usbhsehci {
-	phys = <&hsusb2_phy>;
-};
-
-&usbhshost {
-	port1-mode = "ohci-phy-4pin-dpdm";
-	port2-mode = "ehci-tll";
-};
-
 /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
 &usb_otg_hs {
 	interface-type = <1>;
@@ -698,23 +417,6 @@
 	power = <150>;
 };
 
-&i2c4 {
-	ak8975: magnetometer@c {
-		compatible = "asahi-kasei,ak8975";
-		reg = <0x0c>;
-
-		vdd-supply = <&vhvio>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
-
-		rotation-matrix = "-1", "0", "0",
-				  "0", "1", "0",
-				  "0", "0", "-1";
-
-	};
-};
-
 &mcbsp2 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi
new file mode 100644
index 000000000000..f3f9ff02b35f
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+/ {
+	/* FS USB Host PHY on port 1 for mdm6600 */
+	fsusb1_phy: usb-phy@1 {
+		compatible = "motorola,mapphone-mdm6600";
+		pinctrl-0 = <&usb_mdm6600_pins>;
+		pinctrl-1 = <&usb_mdm6600_sleep_pins>;
+		pinctrl-names = "default", "sleep";
+		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
+		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
+		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
+		/* mode: gpio_148 gpio_149 */
+		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
+		/* cmd: gpio_103 gpio_104 gpio_142 */
+		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
+				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
+		/* status: gpio_52 gpio_53 gpio_55 */
+		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+					<&gpio2 21 GPIO_ACTIVE_HIGH>,
+					<&gpio2 23 GPIO_ACTIVE_HIGH>;
+		#phy-cells = <0>;
+	};
+
+	/* HS USB host TLL nop-phy on port 2 for w3glte */
+	hsusb2_phy: usb-phy@2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	pwm8: pwm-8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_direction_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer8>;
+		ti,clock-source = <0x01>;
+	};
+
+	pwm9: pwm-9 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_enable_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer9>;
+		ti,clock-source = <0x01>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+		pwm-names = "enable", "direction";
+		direction-duty-cycle-ns = <10000000>;
+	};
+};
+
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+	pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	ti,mode = "1w";
+};
+
+&i2c2 {
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
+
+		/* gpio_183 with sys_nirq2 pad as wakeup */
+		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
+				      <&omap4_pmx_core 0x160>;
+		interrupt-names = "irq", "wakeup";
+		wakeup-source;
+	};
+
+	isl29030@44 {
+		compatible = "isil,isl29030";
+		reg = <0x44>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&als_proximity_pins>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
+	};
+};
+
+&omap4_pmx_core {
+	hdq_pins: hdq-pins {
+		pinctrl-single,pins = <
+		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
+		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	/* kpd_row0.gpio_178 */
+	tmp105_irq: tmp105-irq-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	touchscreen_pins: touchscreen-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	usb_mdm6600_pins: usb-mdm6600-pins {
+		pinctrl-single,pins = <
+		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
+		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+
+		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
+		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+
+		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
+		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
+		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
+		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+
+		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
+		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+
+		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
+		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+
+		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
+		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+
+		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
+		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
+		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
+		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	/* Modem sleep pins to keep gpio_49 high with internal pull */
+	usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
+		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	als_proximity_pins: als-proximity-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	vibrator_direction_pin: vibrator-direction-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
+		>;
+	};
+
+	vibrator_enable_pin: vibrator-enable-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
+		>;
+	};
+};
+
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&timer9 {
+	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&usbhsohci {
+	phys = <&fsusb1_phy>;
+	phy-names = "usb";
+};
+
+&usbhsehci {
+	phys = <&hsusb2_phy>;
+};
+
+&usbhshost {
+	port1-mode = "ohci-phy-4pin-dpdm";
+	port2-mode = "ehci-tll";
+};
+
+&i2c4 {
+	ak8975: magnetometer@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+
+		vdd-supply = <&vhvio>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
+
+		rotation-matrix = "-1", "0", "0",
+				  "0", "1", "0",
+				  "0", "0", "-1";
+
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
new file mode 100644
index 000000000000..a356b3a2f24e
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <MATRIX_KEY(5, 0, KEY_VOLUMEUP)>,
+		       <MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)>;
+};
+
+/*
+ * On tablets, mmc1 regulator is vsimcard instead of vwlan2 in the stock kernel
+ * dtb. The regulator may not be wired even if a MMC cage is added though.
+ */
+&mmc1 {
+	vmmc-supply = <&vsimcard>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio_176 */
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi
new file mode 100644
index 000000000000..8b8de92b5424
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-handset.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "led-backlight";
+
+		leds = <&backlight_led>;
+		brightness-levels = <31 63 95 127 159 191 223 255>;
+		default-brightness-level = <6>;
+	};
+
+	/* LCD regulator from sw5 source */
+	lcd_regulator: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd";
+		regulator-min-microvolt = <5050000>;
+		regulator-max-microvolt = <5050000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
+		enable-active-high;
+		vin-supply = <&sw5>;
+	};
+};
+
+&dsi1 {
+	status = "okay";
+	vdd-supply = <&vcsi>;
+
+	port {
+		dsi1_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd0: panel@0 {
+		compatible = "motorola,droid4-panel", "panel-dsi-cm";
+		reg = <0>;
+		label = "lcd0";
+		vddi-supply = <&lcd_regulator>;
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
+		backlight = <&backlight>;
+
+		width-mm = <50>;
+		height-mm = <89>;
+		rotation = <90>;
+
+		panel-timing {
+			clock-frequency = <0>;		/* Calculated by dsi */
+
+			hback-porch = <2>;
+			hactive = <540>;
+			hfront-porch = <0>;
+			hsync-len = <2>;
+
+			vback-porch = <1>;
+			vactive = <960>;
+			vfront-porch = <0>;
+			vsync-len = <1>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi1_out_ep>;
+			};
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts
index ccf03a743678..1d9000f84f1b 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts
@@ -1,11 +1,20 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
 
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
 
 / {
 	model = "Motorola Droid Bionic XT875";
 	compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
 };
 
 &keypad {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts
index e833c21f1c01..cc3f3e1b65ea 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts
@@ -1,9 +1,21 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
 
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
 
 / {
+	model = "Motorola Droid 4 XT894";
+	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 
@@ -33,11 +45,6 @@
 	};
 };
 
-/ {
-	model = "Motorola Droid 4 XT894";
-	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
-};
-
 &keypad {
 	keypad,num-rows = <8>;
 	keypad,num-columns = <8>;
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
index 01d783826d5f..24f7d0285f79 100644
--- linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
@@ -51,6 +51,12 @@
 		regulator-name = "unknown";
 	};
 
+	wl12xx_pwrseq: wl12xx-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&twl 1>;
+		clock-names = "ext_clock";
+	};
+
        /* regulator for wl12xx on sdio2 */
 	wl12xx_vmmc: wl12xx-vmmc {
 		pinctrl-names = "default";
@@ -74,6 +80,7 @@
 	twl: pmic@48 {
 		compatible = "ti,twl6032";
 		reg = <0x48>;
+		#clock-cells = <1>;
 		/* IRQ# = 7 */
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 		interrupt-controller;
@@ -294,6 +301,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&wl12xx_pins>;
 	vmmc-supply = <&wl12xx_vmmc>;
+	mmc-pwrseq = <&wl12xx_pwrseq>;
 	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core 0x12e>;
 	non-removable;
@@ -454,10 +462,12 @@
 	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core OMAP4_UART2_RX>;
 
-	/*
-	 * BT + GPS in WL1283 in WG7500 requiring CLK32KAUDIO of pmic
-	 * which does not have a driver
-	 */
+	bluetooth-gnss {
+		compatible = "ti,wl1283-st";
+		enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;	/* GPIO_25 */
+		clocks = <&twl 1>;
+		clock-names = "ext_clock";
+	};
 };
 
 &uart3 {
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
new file mode 100644
index 000000000000..762934e2d075
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+	model = "Motorola Xyboard MZ609";
+	compatible = "motorola,xyboard-mz609", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display1 = &hdmi0;
+	};
+
+	backlight: backlight {
+		compatible = "led-backlight";
+
+		leds = <&backlight_led>;
+		brightness-levels = <31 63 95 127 159 191 223 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&i2c1 {
+	led-controller@38 {
+		compatible = "ti,lm3532";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x38>;
+
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+		ramp-up-us = <1024>;
+		ramp-down-us = <8193>;
+
+		backlight_led: led@0 {
+			reg = <0>;
+			led-sources = <2>;
+			ti,led-mode = <0>;
+			label = ":backlight";
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
new file mode 100644
index 000000000000..b9caea3b7f9d
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+	model = "Motorola Xyboard MZ617";
+	compatible = "motorola,xyboard-mz617", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display1 = &hdmi0;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm/common/locomo.c linux-libre-6.8-gnu/arch/arm/common/locomo.c
index 70480dd9e96d..6d0c9f7268ba 100644
--- linux-libre-6.7-gnu/arch/arm/common/locomo.c
+++ linux-libre-6.8-gnu/arch/arm/common/locomo.c
@@ -68,6 +68,8 @@ struct locomo {
 #endif
 };
 
+static const struct bus_type locomo_bus_type;
+
 struct locomo_dev_info {
 	unsigned long	offset;
 	unsigned long	length;
@@ -842,7 +844,7 @@ static void locomo_bus_remove(struct device *dev)
 		drv->remove(ldev);
 }
 
-struct bus_type locomo_bus_type = {
+static const struct bus_type locomo_bus_type = {
 	.name		= "locomo-bus",
 	.match		= locomo_match,
 	.probe		= locomo_bus_probe,
diff --git linux-libre-6.7-gnu/arch/arm/configs/am200epdkit_defconfig linux-libre-6.8-gnu/arch/arm/configs/am200epdkit_defconfig
index a25834e4c901..134a559aba3d 100644
--- linux-libre-6.7-gnu/arch/arm/configs/am200epdkit_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/am200epdkit_defconfig
@@ -1,6 +1,5 @@
 CONFIG_LOCALVERSION="gum"
 CONFIG_SYSVIPC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_PREEMPT=y
 CONFIG_EXPERT=y
 # CONFIG_EPOLL is not set
@@ -49,7 +48,6 @@ CONFIG_BLK_DEV_SD=m
 CONFIG_ATA=m
 CONFIG_PATA_PCMCIA=m
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=m
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/aspeed_g4_defconfig linux-libre-6.8-gnu/arch/arm/configs/aspeed_g4_defconfig
index 9d1b297c432e..b3dc0465796f 100644
--- linux-libre-6.7-gnu/arch/arm/configs/aspeed_g4_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/aspeed_g4_defconfig
@@ -12,11 +12,12 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZO is not set
 # CONFIG_RD_LZ4 is not set
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_AIO is not set
-CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_ASPEED=y
 CONFIG_MACH_ASPEED_G4=y
@@ -24,7 +25,6 @@ CONFIG_VMSPLIT_2G=y
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
-CONFIG_KEXEC=y
 CONFIG_JUMP_LABEL=y
 CONFIG_STRICT_KERNEL_RWX=y
 # CONFIG_BLK_DEBUG_FS is not set
diff --git linux-libre-6.7-gnu/arch/arm/configs/aspeed_g5_defconfig linux-libre-6.8-gnu/arch/arm/configs/aspeed_g5_defconfig
index b55f8f539c5f..3fdf4dbfdea5 100644
--- linux-libre-6.7-gnu/arch/arm/configs/aspeed_g5_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/aspeed_g5_defconfig
@@ -12,11 +12,12 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZO is not set
 # CONFIG_RD_LZ4 is not set
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_AIO is not set
-CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_ASPEED=y
 CONFIG_MACH_ASPEED_G5=y
@@ -29,7 +30,6 @@ CONFIG_NR_CPUS=2
 CONFIG_HIGHMEM=y
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
-CONFIG_KEXEC=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/assabet_defconfig linux-libre-6.8-gnu/arch/arm/configs/assabet_defconfig
index 8ba8eb7a4adf..07ab9eaac4af 100644
--- linux-libre-6.7-gnu/arch/arm/configs/assabet_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/assabet_defconfig
@@ -28,7 +28,6 @@ CONFIG_MTD_SA1100=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_PCNET=y
 CONFIG_INPUT_EVDEV=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/at91_dt_defconfig linux-libre-6.8-gnu/arch/arm/configs/at91_dt_defconfig
index 71b5acc78187..1d53aec4c836 100644
--- linux-libre-6.7-gnu/arch/arm/configs/at91_dt_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/at91_dt_defconfig
@@ -6,8 +6,9 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
@@ -22,7 +23,6 @@ CONFIG_UACCESS_WITH_MEMCPY=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
-CONFIG_KEXEC=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
diff --git linux-libre-6.7-gnu/arch/arm/configs/bcm2835_defconfig linux-libre-6.8-gnu/arch/arm/configs/bcm2835_defconfig
index 225a16c0323c..b5f0bd8dd536 100644
--- linux-libre-6.7-gnu/arch/arm/configs/bcm2835_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/bcm2835_defconfig
@@ -18,17 +18,17 @@ CONFIG_SCHED_AUTOGROUP=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
 CONFIG_CC_STACKPROTECTOR_REGULAR=y
+CONFIG_CRASH_DUMP=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM2835=y
 CONFIG_AEABI=y
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
-CONFIG_CRASH_DUMP=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/clps711x_defconfig linux-libre-6.8-gnu/arch/arm/configs/clps711x_defconfig
index d7ed1e7c6a90..6fa3477e6b02 100644
--- linux-libre-6.7-gnu/arch/arm/configs/clps711x_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/clps711x_defconfig
@@ -6,15 +6,8 @@ CONFIG_RD_LZMA=y
 CONFIG_EXPERT=y
 CONFIG_JUMP_LABEL=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_CLPS711X=y
-CONFIG_ARCH_AUTCPU12=y
-CONFIG_ARCH_CDB89712=y
-CONFIG_ARCH_CLEP7312=y
-CONFIG_ARCH_EDB7211=y
-CONFIG_ARCH_P720T=y
 CONFIG_AEABI=y
 # CONFIG_COREDUMP is not set
-CONFIG_SLUB=y
 CONFIG_SLUB_TINY=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/collie_defconfig linux-libre-6.8-gnu/arch/arm/configs/collie_defconfig
index 69341c33e0cc..01b5a5a73f03 100644
--- linux-libre-6.7-gnu/arch/arm/configs/collie_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/collie_defconfig
@@ -13,7 +13,6 @@ CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
 # CONFIG_SWAP is not set
-CONFIG_SLUB=y
 CONFIG_SLUB_TINY=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -60,9 +59,9 @@ CONFIG_MCP_SA11X0=y
 CONFIG_MCP_UCB1200=y
 CONFIG_MCP_UCB1200_TS=y
 CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_SA1100=y
 # CONFIG_VGA_CONSOLE is not set
+CONFIG_FB_MODE_HELPERS=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_NEW_LEDS=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/davinci_all_defconfig linux-libre-6.8-gnu/arch/arm/configs/davinci_all_defconfig
index 05ea71778ef8..3474e475373a 100644
--- linux-libre-6.7-gnu/arch/arm/configs/davinci_all_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/davinci_all_defconfig
@@ -148,8 +148,8 @@ CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_TINYDRM=m
 CONFIG_TINYDRM_ST7586=m
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_DA8XX=y
+CONFIG_FIRMWARE_EDID=y
 CONFIG_BACKLIGHT_PWM=m
 CONFIG_BACKLIGHT_GPIO=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/dove_defconfig linux-libre-6.8-gnu/arch/arm/configs/dove_defconfig
index 46859e6fee5b..2849d17f5856 100644
--- linux-libre-6.7-gnu/arch/arm/configs/dove_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/dove_defconfig
@@ -6,9 +6,7 @@ CONFIG_EXPERT=y
 # CONFIG_ARCH_MULTI_V6 is not set
 CONFIG_ARCH_MULTI_V7=y
 CONFIG_ARCH_DOVE=y
-CONFIG_MACH_DOVE_DB=y
 CONFIG_MACH_CM_A510=y
-CONFIG_MACH_DOVE_DT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_ARM_APPENDED_DTB=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/ep93xx_defconfig linux-libre-6.8-gnu/arch/arm/configs/ep93xx_defconfig
index 44e89a980d29..7dece9d98828 100644
--- linux-libre-6.7-gnu/arch/arm/configs/ep93xx_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/ep93xx_defconfig
@@ -78,8 +78,8 @@ CONFIG_SPI_EP93XX=y
 CONFIG_WATCHDOG=y
 CONFIG_EP93XX_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_EP93XX=y
+CONFIG_FB_MODE_HELPERS=y
 CONFIG_LOGO=y
 CONFIG_USB=y
 CONFIG_USB_DYNAMIC_MINORS=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/footbridge_defconfig linux-libre-6.8-gnu/arch/arm/configs/footbridge_defconfig
index c9f4594b7ca9..5f6963687ee4 100644
--- linux-libre-6.7-gnu/arch/arm/configs/footbridge_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/footbridge_defconfig
@@ -55,7 +55,6 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 CONFIG_NET_PCI=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/gemini_defconfig linux-libre-6.8-gnu/arch/arm/configs/gemini_defconfig
index 592a6e6024d4..7b1daec630cb 100644
--- linux-libre-6.7-gnu/arch/arm/configs/gemini_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/gemini_defconfig
@@ -7,13 +7,13 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_USER_NS=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_GEMINI=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_CMDLINE="console=ttyS0,115200n8"
-CONFIG_KEXEC=y
 CONFIG_PM=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/imx_v4_v5_defconfig linux-libre-6.8-gnu/arch/arm/configs/imx_v4_v5_defconfig
index ec45e6225225..875c8cdbada7 100644
--- linux-libre-6.7-gnu/arch/arm/configs/imx_v4_v5_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/imx_v4_v5_defconfig
@@ -12,11 +12,6 @@ CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX21ADS=y
-CONFIG_MACH_MX27ADS=y
-CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_IMX27_VISSTRIM_M10=y
-CONFIG_MACH_PCA100=y
 CONFIG_SOC_IMX1=y
 CONFIG_SOC_IMX25=y
 CONFIG_SOC_IMX27=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/imx_v6_v7_defconfig linux-libre-6.8-gnu/arch/arm/configs/imx_v6_v7_defconfig
index 0a90583f9f01..8f9dbe8d9029 100644
--- linux-libre-6.7-gnu/arch/arm/configs/imx_v6_v7_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/imx_v6_v7_defconfig
@@ -297,6 +297,7 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
 CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_GPIO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/jornada720_defconfig linux-libre-6.8-gnu/arch/arm/configs/jornada720_defconfig
index 91bdcc095884..e6ec768f42e2 100644
--- linux-libre-6.7-gnu/arch/arm/configs/jornada720_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/jornada720_defconfig
@@ -1,6 +1,5 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
@@ -26,7 +25,6 @@ CONFIG_ATA=y
 CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCMCIA=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
diff --git linux-libre-6.7-gnu/arch/arm/configs/lpc32xx_defconfig linux-libre-6.8-gnu/arch/arm/configs/lpc32xx_defconfig
index 42053e45f730..98e267213b21 100644
--- linux-libre-6.7-gnu/arch/arm/configs/lpc32xx_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/lpc32xx_defconfig
@@ -5,8 +5,6 @@ CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EXPERT=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/mmp2_defconfig linux-libre-6.8-gnu/arch/arm/configs/mmp2_defconfig
index 3d1d6f3b592a..f6f9e135353e 100644
--- linux-libre-6.7-gnu/arch/arm/configs/mmp2_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/mmp2_defconfig
@@ -2,7 +2,6 @@ CONFIG_SYSVIPC=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MMP=y
 CONFIG_AEABI=y
@@ -28,7 +27,6 @@ CONFIG_MTD_ONENAND_GENERIC=y
 CONFIG_MTD_RAW_NAND=y
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
diff --git linux-libre-6.7-gnu/arch/arm/configs/moxart_defconfig linux-libre-6.8-gnu/arch/arm/configs/moxart_defconfig
index bb6a5222e42f..1d41e73f4903 100644
--- linux-libre-6.7-gnu/arch/arm/configs/moxart_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/moxart_defconfig
@@ -4,13 +4,13 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_EXPERT=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-CONFIG_EXPERT=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
@@ -126,8 +126,8 @@ CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_KGDB=y
 CONFIG_DEBUG_PAGEALLOC=y
 # CONFIG_SLUB_DEBUG is not set
-CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_SHIRQ=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/multi_v4t_defconfig linux-libre-6.8-gnu/arch/arm/configs/multi_v4t_defconfig
index a7fabf1d88ff..27d650635d9b 100644
--- linux-libre-6.7-gnu/arch/arm/configs/multi_v4t_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/multi_v4t_defconfig
@@ -5,12 +5,12 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_ARCH_MULTI_V4T=y
 # CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_NSPIRE=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91RM9200=y
 CONFIG_ARCH_CLPS711X=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX1=y
-CONFIG_ARCH_NSPIRE=y
 CONFIG_ARCH_INTEGRATOR=y
 CONFIG_ARCH_INTEGRATOR_AP=y
 CONFIG_INTEGRATOR_IMPD1=y
@@ -25,7 +25,6 @@ CONFIG_ARM_CLPS711X_CPUIDLE=y
 CONFIG_JUMP_LABEL=y
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_COREDUMP is not set
-CONFIG_SLUB=y
 CONFIG_SLUB_TINY=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/multi_v5_defconfig linux-libre-6.8-gnu/arch/arm/configs/multi_v5_defconfig
index 52bb1a5e25fc..3f4ddcf49ec7 100644
--- linux-libre-6.7-gnu/arch/arm/configs/multi_v5_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/multi_v5_defconfig
@@ -62,8 +62,8 @@ CONFIG_NET_DSA=y
 CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
-CONFIG_PCI_MVEBU=y
 CONFIG_PCI_VERSATILE=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_IMX_WEIM=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/multi_v7_defconfig linux-libre-6.8-gnu/arch/arm/configs/multi_v7_defconfig
index 10fd74bf85f9..ecb3e286107a 100644
--- linux-libre-6.7-gnu/arch/arm/configs/multi_v7_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/multi_v7_defconfig
@@ -5,8 +5,11 @@ CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_VIRT=y
 CONFIG_ARCH_AIROHA=y
+CONFIG_ARCH_SUNPLUS=y
+CONFIG_ARCH_UNIPHIER=y
 CONFIG_ARCH_ACTIONS=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_ARTPEC=y
@@ -96,10 +99,8 @@ CONFIG_MACH_SPEAR1310=y
 CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
 CONFIG_ARCH_STM32=y
-CONFIG_ARCH_SUNPLUS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_UNIPHIER=y
 CONFIG_ARCH_U8500=y
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VEXPRESS_TC2_PM=y
@@ -109,7 +110,6 @@ CONFIG_SMP=y
 CONFIG_NR_CPUS=16
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_KEXEC=y
 CONFIG_EFI=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
@@ -179,10 +179,10 @@ CONFIG_NFC_S3FWRN5_I2C=m
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_MVEBU=y
 CONFIG_PCI_TEGRA=y
-CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCIE_RCAR_HOST=y
-CONFIG_PCI_DRA7XX_EP=y
+CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCI_DRA7XX_EP=y
 CONFIG_PCI_ENDPOINT=y
 CONFIG_PCI_ENDPOINT_CONFIGFS=y
 CONFIG_PCI_EPF_TEST=m
@@ -272,6 +272,7 @@ CONFIG_KS8851=y
 CONFIG_LAN966X_SWITCH=m
 CONFIG_R8169=y
 CONFIG_SH_ETH=y
+CONFIG_RAVB=y
 CONFIG_SMSC911X=y
 CONFIG_SNI_AVE=y
 CONFIG_STMMAC_ETH=y
@@ -523,6 +524,7 @@ CONFIG_CHARGER_TPS65090=y
 CONFIG_BATTERY_ACER_A500=m
 CONFIG_SENSORS_ARM_SCMI=y
 CONFIG_SENSORS_ASPEED=m
+CONFIG_SENSORS_GXP_FAN_CTRL=m
 CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_SENSORS_LAN966X=m
 CONFIG_SENSORS_LM90=y
@@ -531,7 +533,6 @@ CONFIG_SENSORS_NTC_THERMISTOR=m
 CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_INA2XX=m
-CONFIG_SENSORS_GXP_FAN_CTRL=m
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
 CONFIG_IMX_THERMAL=y
@@ -691,6 +692,7 @@ CONFIG_VIDEO_STI_BDISP=m
 CONFIG_VIDEO_STI_DELTA=m
 CONFIG_VIDEO_STI_HVA=m
 CONFIG_VIDEO_STM32_DCMI=m
+CONFIG_VIDEO_STM32_DCMIPP=m
 CONFIG_V4L_TEST_DRIVERS=y
 CONFIG_VIDEO_VIVID=m
 CONFIG_VIDEO_S5C73M3=m
@@ -1072,6 +1074,7 @@ CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_OMAP2PLUS_MBOX=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_QCOM_APCS_IPC=y
+CONFIG_STM32_IPCC=m
 CONFIG_QCOM_IPCC=y
 CONFIG_OMAP_IOMMU=y
 CONFIG_OMAP_IOMMU_DEBUG=y
@@ -1087,20 +1090,18 @@ CONFIG_QCOM_Q6V5_MSS=m
 CONFIG_QCOM_SYSMON=m
 CONFIG_QCOM_WCNSS_PIL=m
 CONFIG_ST_REMOTEPROC=m
+CONFIG_RPMSG_CHAR=m
+CONFIG_RPMSG_CTRL=m
 CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RPMSG_VIRTIO=m
 CONFIG_ASPEED_LPC_CTRL=m
 CONFIG_ASPEED_LPC_SNOOP=m
 CONFIG_ASPEED_P2A_CTRL=m
-CONFIG_RASPBERRYPI_POWER=y
 CONFIG_QCOM_COMMAND_DB=m
-CONFIG_QCOM_CPR=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_OCMEM=m
 CONFIG_QCOM_RMTFS_MEM=m
 CONFIG_QCOM_RPMH=y
-CONFIG_QCOM_RPMHPD=y
-CONFIG_QCOM_RPMPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
@@ -1128,11 +1129,15 @@ CONFIG_ARCH_R8A7744=y
 CONFIG_ARCH_R9A06G032=y
 CONFIG_ARCH_SH73A0=y
 CONFIG_ROCKCHIP_IODOMAIN=y
-CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
 CONFIG_ARCH_TEGRA_114_SOC=y
 CONFIG_ARCH_TEGRA_124_SOC=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_QCOM_CPR=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
+CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARM_EXYNOS_BUS_DEVFREQ=m
 CONFIG_ARM_TEGRA_DEVFREQ=m
 CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m
@@ -1191,6 +1196,7 @@ CONFIG_PWM_TEGRA=y
 CONFIG_PWM_VT8500=y
 CONFIG_KEYSTONE_IRQ=y
 CONFIG_RESET_MCHP_SPARX5=y
+CONFIG_RESET_SCMI=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
 CONFIG_PHY_BRCM_USB=m
@@ -1240,8 +1246,8 @@ CONFIG_OPTEE=y
 CONFIG_INTERCONNECT_QCOM=y
 CONFIG_INTERCONNECT_QCOM_MSM8916=y
 CONFIG_COUNTER=m
-CONFIG_STM32_TIMER_CNT=m
 CONFIG_STM32_LPTIMER_CNT=m
+CONFIG_STM32_TIMER_CNT=m
 CONFIG_EXT4_FS=y
 CONFIG_AUTOFS_FS=y
 CONFIG_MSDOS_FS=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/mv78xx0_defconfig linux-libre-6.8-gnu/arch/arm/configs/mv78xx0_defconfig
index 4ed6e8c8e164..3343f72de7ea 100644
--- linux-libre-6.7-gnu/arch/arm/configs/mv78xx0_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/mv78xx0_defconfig
@@ -3,7 +3,6 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
@@ -52,7 +51,6 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_NET_PCI=y
 CONFIG_MV643XX_ETH=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/mxs_defconfig linux-libre-6.8-gnu/arch/arm/configs/mxs_defconfig
index feb38a94c1a7..43bc1255a5db 100644
--- linux-libre-6.7-gnu/arch/arm/configs/mxs_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/mxs_defconfig
@@ -138,7 +138,8 @@ CONFIG_PWM_MXS=y
 CONFIG_NVMEM_MXS_OCOTP=y
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
-CONFIG_FSCACHE=m
+CONFIG_NETFS_SUPPORT=m
+CONFIG_FSCACHE=y
 CONFIG_FSCACHE_STATS=y
 CONFIG_CACHEFILES=m
 CONFIG_VFAT_FS=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/neponset_defconfig linux-libre-6.8-gnu/arch/arm/configs/neponset_defconfig
index c333406ce5e3..2227f86100ad 100644
--- linux-libre-6.7-gnu/arch/arm/configs/neponset_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/neponset_defconfig
@@ -38,7 +38,6 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_SMC=y
 CONFIG_PCMCIA_PCNET=y
 CONFIG_SMC9194=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/netwinder_defconfig linux-libre-6.8-gnu/arch/arm/configs/netwinder_defconfig
index 30ff6fbce5a3..e639e6ad02cb 100644
--- linux-libre-6.7-gnu/arch/arm/configs/netwinder_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/netwinder_defconfig
@@ -27,7 +27,6 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_PATA_WINBOND=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_NET_TULIP=y
 CONFIG_TULIP=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/omap1_defconfig linux-libre-6.8-gnu/arch/arm/configs/omap1_defconfig
index 7c2cc7a89511..729ea8157e2a 100644
--- linux-libre-6.7-gnu/arch/arm/configs/omap1_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/omap1_defconfig
@@ -28,7 +28,6 @@ CONFIG_MACH_OMAP_PALMTE=y
 CONFIG_MACH_SX1=y
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
-CONFIG_MACH_OMAP_GENERIC=y
 CONFIG_AEABI=y
 CONFIG_CMDLINE="root=1f03 rootfstype=jffs2"
 CONFIG_FPE_NWFPE=y
@@ -40,7 +39,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
 # CONFIG_SWAP is not set
-CONFIG_SLUB=y
 CONFIG_SLUB_TINY=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
@@ -132,14 +130,14 @@ CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_VIRTUAL=y
 CONFIG_FB_OMAP=y
 CONFIG_FB_OMAP_LCDC_EXTERNAL=y
 CONFIG_FB_OMAP_LCDC_HWA742=y
 CONFIG_FB_OMAP_MANUAL_UPDATE=y
 CONFIG_FB_OMAP_LCD_MIPID=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/omap2plus_defconfig linux-libre-6.8-gnu/arch/arm/configs/omap2plus_defconfig
index 7b1b41b4b160..3a166c2f02bd 100644
--- linux-libre-6.7-gnu/arch/arm/configs/omap2plus_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/omap2plus_defconfig
@@ -607,6 +607,7 @@ CONFIG_LEDS_LP55XX_COMMON=m
 CONFIG_LEDS_LP5523=m
 CONFIG_LEDS_PCA963X=m
 CONFIG_LEDS_PWM=m
+CONFIG_LEDS_BD2606MVV=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_ONESHOT=m
@@ -624,6 +625,7 @@ CONFIG_RTC_DRV_PALMAS=m
 CONFIG_RTC_DRV_OMAP=m
 CONFIG_RTC_DRV_CPCAP=m
 CONFIG_DMADEVICES=y
+CONFIG_CLK_TWL=m
 CONFIG_CLK_TWL6040=m
 CONFIG_COMMON_CLK_PALMAS=m
 CONFIG_OMAP_IOMMU=y
@@ -646,6 +648,9 @@ CONFIG_CPCAP_ADC=m
 CONFIG_INA2XX_ADC=m
 CONFIG_TI_AM335X_ADC=m
 CONFIG_TWL4030_MADC=m
+CONFIG_TWL6030_GPADC=m
+CONFIG_MPU3050_I2C=m
+CONFIG_INV_MPU6050_I2C=m
 CONFIG_SENSORS_ISL29028=m
 CONFIG_AK8975=m
 CONFIG_BMP280=m
diff --git linux-libre-6.7-gnu/arch/arm/configs/pxa168_defconfig linux-libre-6.8-gnu/arch/arm/configs/pxa168_defconfig
index ec3a43f9c85e..ce10fe2104bf 100644
--- linux-libre-6.7-gnu/arch/arm/configs/pxa168_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/pxa168_defconfig
@@ -1,5 +1,4 @@
 CONFIG_SYSVIPC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -22,7 +21,6 @@ CONFIG_IP_PNP=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
diff --git linux-libre-6.7-gnu/arch/arm/configs/pxa3xx_defconfig linux-libre-6.8-gnu/arch/arm/configs/pxa3xx_defconfig
index 7f95fa273a7d..381356faf382 100644
--- linux-libre-6.7-gnu/arch/arm/configs/pxa3xx_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/pxa3xx_defconfig
@@ -1,7 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -34,7 +33,6 @@ CONFIG_MTD_NAND_MARVELL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_KEYBOARD_ATKBD is not set
diff --git linux-libre-6.7-gnu/arch/arm/configs/pxa910_defconfig linux-libre-6.8-gnu/arch/arm/configs/pxa910_defconfig
index 958d958377dc..1f28aea86014 100644
--- linux-libre-6.7-gnu/arch/arm/configs/pxa910_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/pxa910_defconfig
@@ -3,7 +3,6 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_ARCH_MMP=y
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk"
@@ -23,7 +22,6 @@ CONFIG_IP_PNP=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
diff --git linux-libre-6.7-gnu/arch/arm/configs/pxa_defconfig linux-libre-6.8-gnu/arch/arm/configs/pxa_defconfig
index 9e81b1849e4c..f2ca5c9131b5 100644
--- linux-libre-6.7-gnu/arch/arm/configs/pxa_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/pxa_defconfig
@@ -10,9 +10,10 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=13
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
+CONFIG_KEXEC=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_ARCH_GUMSTIX=y
@@ -22,7 +23,6 @@ CONFIG_MACH_BORZOI=y
 CONFIG_AEABI=y
 CONFIG_ARCH_FORCE_MAX_ORDER=8
 CONFIG_CMDLINE="root=/dev/ram0 ro"
-CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -44,7 +44,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_LDM_PARTITION=y
 CONFIG_CMDLINE_PARTITION=y
 CONFIG_BINFMT_MISC=y
-CONFIG_SLUB=y
 CONFIG_SLUB_TINY=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -380,8 +379,6 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_PXA27x=m
 CONFIG_DRM=m
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
 CONFIG_FB_PXA_PARAMETERS=y
@@ -393,6 +390,8 @@ CONFIG_LCD_CORGI=m
 CONFIG_LCD_PLATFORM=m
 CONFIG_BACKLIGHT_PWM=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_TILEBLITTING=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
diff --git linux-libre-6.7-gnu/arch/arm/configs/qcom_defconfig linux-libre-6.8-gnu/arch/arm/configs/qcom_defconfig
index 737d51412eb2..ec52ccece0ca 100644
--- linux-libre-6.7-gnu/arch/arm/configs/qcom_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/qcom_defconfig
@@ -6,8 +6,8 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_MSM8X60=y
@@ -139,11 +139,11 @@ CONFIG_PINCTRL_MDM9615=y
 CONFIG_PINCTRL_MSM8X74=y
 CONFIG_PINCTRL_MSM8909=y
 CONFIG_PINCTRL_MSM8916=y
-CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
-CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIOLIB=y
 CONFIG_PINCTRL_SDX55=y
 CONFIG_PINCTRL_SDX65=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
@@ -259,8 +259,6 @@ CONFIG_QCOM_OCMEM=y
 CONFIG_QCOM_PM=y
 CONFIG_QCOM_RMTFS_MEM=y
 CONFIG_QCOM_RPMH=y
-CONFIG_QCOM_RPMHPD=y
-CONFIG_QCOM_RPMPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
@@ -268,6 +266,8 @@ CONFIG_QCOM_SMSM=y
 CONFIG_QCOM_SOCINFO=y
 CONFIG_QCOM_STATS=y
 CONFIG_QCOM_WCNSS_CTRL=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
 CONFIG_EXTCON_QCOM_SPMI_MISC=y
 CONFIG_IIO=y
 CONFIG_IIO_BUFFER_CB=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/realview_defconfig linux-libre-6.8-gnu/arch/arm/configs/realview_defconfig
index a221a99f6472..febea5cf7aaa 100644
--- linux-libre-6.7-gnu/arch/arm/configs/realview_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/realview_defconfig
@@ -9,8 +9,6 @@ CONFIG_MACH_REALVIEW_EB=y
 CONFIG_REALVIEW_EB_ARM1136=y
 CONFIG_REALVIEW_EB_ARM1176=y
 CONFIG_REALVIEW_EB_A9MP=y
-CONFIG_REALVIEW_EB_ARM11MP=y
-CONFIG_MACH_REALVIEW_PB11MP=y
 CONFIG_MACH_REALVIEW_PB1176=y
 CONFIG_MACH_REALVIEW_PBA8=y
 CONFIG_MACH_REALVIEW_PBX=y
@@ -58,6 +56,8 @@ CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_AUXDISPLAY=y
+CONFIG_ARM_CHARLCD=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
@@ -85,8 +85,6 @@ CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_PL031=y
-CONFIG_AUXDISPLAY=y
-CONFIG_ARM_CHARLCD=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/rpc_defconfig linux-libre-6.8-gnu/arch/arm/configs/rpc_defconfig
index b1d12a2c2ef8..24f1fa868230 100644
--- linux-libre-6.7-gnu/arch/arm/configs/rpc_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/rpc_defconfig
@@ -2,13 +2,13 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_RPC=y
 CONFIG_CPU_SA110=y
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_NET=y
@@ -45,7 +45,6 @@ CONFIG_ATA=y
 CONFIG_PATA_ICSIDE=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_ARM_ETHER1=y
 CONFIG_ARM_ETHER3=y
 CONFIG_ARM_ETHERH=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/s3c6400_defconfig linux-libre-6.8-gnu/arch/arm/configs/s3c6400_defconfig
index 93258d5b57ff..a37e6ac40825 100644
--- linux-libre-6.7-gnu/arch/arm/configs/s3c6400_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/s3c6400_defconfig
@@ -1,5 +1,3 @@
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_ARCH_MULTI_V6=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/s5pv210_defconfig linux-libre-6.8-gnu/arch/arm/configs/s5pv210_defconfig
index d280169081bd..5dbe85c263de 100644
--- linux-libre-6.7-gnu/arch/arm/configs/s5pv210_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/s5pv210_defconfig
@@ -3,8 +3,6 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_CGROUPS=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_ARCH_S5PV210=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/sama5_defconfig linux-libre-6.8-gnu/arch/arm/configs/sama5_defconfig
index 0e030063130f..9096a99b5abd 100644
--- linux-libre-6.7-gnu/arch/arm/configs/sama5_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/sama5_defconfig
@@ -6,6 +6,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
@@ -14,7 +15,6 @@ CONFIG_SOC_SAMA5D4=y
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
 CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
-CONFIG_KEXEC=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/sama7_defconfig linux-libre-6.8-gnu/arch/arm/configs/sama7_defconfig
index be0cfed4ecf1..7fa5d251ced2 100644
--- linux-libre-6.7-gnu/arch/arm/configs/sama7_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/sama7_defconfig
@@ -6,13 +6,11 @@ CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CGROUPS=y
 CONFIG_CGROUP_DEBUG=y
 CONFIG_NAMESPACES=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
 # CONFIG_FHANDLE is not set
 # CONFIG_IO_URING is not set
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EXPERT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAMA7G5=y
 CONFIG_ATMEL_CLOCKSOURCE_TCB=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/shmobile_defconfig linux-libre-6.8-gnu/arch/arm/configs/shmobile_defconfig
index dfdea295c4af..c47a638172a8 100644
--- linux-libre-6.7-gnu/arch/arm/configs/shmobile_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/shmobile_defconfig
@@ -75,6 +75,7 @@ CONFIG_SERIAL_8250=y
 # CONFIG_SERIAL_8250_16550A_VARIANTS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_EXAR is not set
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_EM=y
 # CONFIG_SERIAL_8250_PERICOM is not set
@@ -134,8 +135,10 @@ CONFIG_VIDEO_ADV7604=y
 CONFIG_VIDEO_ADV7604_CEC=y
 CONFIG_VIDEO_ML86V7667=y
 CONFIG_DRM=y
+CONFIG_DRM_FBDEV_EMULATION=y
 CONFIG_DRM_RCAR_DU=y
 # CONFIG_DRM_RCAR_USE_MIPI_DSI is not set
+CONFIG_DRM_SHMOBILE=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
@@ -144,8 +147,7 @@ CONFIG_DRM_SII902X=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FB_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_AS3711=y
 CONFIG_SOUND=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/spitz_defconfig linux-libre-6.8-gnu/arch/arm/configs/spitz_defconfig
index 10108b4a978e..294d16ddeb18 100644
--- linux-libre-6.7-gnu/arch/arm/configs/spitz_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/spitz_defconfig
@@ -2,7 +2,6 @@ CONFIG_SYSVIPC=y
 CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_PROFILING=y
@@ -87,7 +86,6 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_ATA=y
 CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_PCMCIA_PCNET=m
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
diff --git linux-libre-6.7-gnu/arch/arm/configs/stm32_defconfig linux-libre-6.8-gnu/arch/arm/configs/stm32_defconfig
index e95aba916547..b9fe3fbed5ae 100644
--- linux-libre-6.7-gnu/arch/arm/configs/stm32_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/stm32_defconfig
@@ -4,6 +4,7 @@ CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
@@ -11,7 +12,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-CONFIG_EXPERT=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_MMU is not set
 CONFIG_ARCH_STM32=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/tegra_defconfig linux-libre-6.8-gnu/arch/arm/configs/tegra_defconfig
index 8635b7216bfc..d2a094ad360c 100644
--- linux-libre-6.7-gnu/arch/arm/configs/tegra_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/tegra_defconfig
@@ -13,13 +13,13 @@ CONFIG_CGROUP_DEBUG=y
 CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_ELF_CORE is not set
 CONFIG_EXPERT=y
+# CONFIG_ELF_CORE is not set
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_SMP=y
 CONFIG_HIGHMEM=y
-CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
diff --git linux-libre-6.7-gnu/arch/arm/configs/vf610m4_defconfig linux-libre-6.8-gnu/arch/arm/configs/vf610m4_defconfig
index 963ff0a03311..a5609cbfdfb3 100644
--- linux-libre-6.7-gnu/arch/arm/configs/vf610m4_defconfig
+++ linux-libre-6.8-gnu/arch/arm/configs/vf610m4_defconfig
@@ -4,8 +4,8 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_LZMA is not set
 # CONFIG_RD_XZ is not set
 # CONFIG_RD_LZ4 is not set
-CONFIG_KALLSYMS_ALL=y
 CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_MMU is not set
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_VF610=y
diff --git linux-libre-6.7-gnu/arch/arm/include/asm/cacheflush.h linux-libre-6.8-gnu/arch/arm/include/asm/cacheflush.h
index f6181f69577f..1075534b0a2e 100644
--- linux-libre-6.7-gnu/arch/arm/include/asm/cacheflush.h
+++ linux-libre-6.8-gnu/arch/arm/include/asm/cacheflush.h
@@ -340,6 +340,8 @@ static inline void flush_cache_vmap(unsigned long start, unsigned long end)
 		dsb(ishst);
 }
 
+#define flush_cache_vmap_early(start, end)	do { } while (0)
+
 static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
 {
 	if (!cache_is_vipt_nonaliasing())
diff --git linux-libre-6.7-gnu/arch/arm/include/asm/hardware/locomo.h linux-libre-6.8-gnu/arch/arm/include/asm/hardware/locomo.h
index aaaedafef7cc..9fd9ad5d9202 100644
--- linux-libre-6.7-gnu/arch/arm/include/asm/hardware/locomo.h
+++ linux-libre-6.8-gnu/arch/arm/include/asm/hardware/locomo.h
@@ -158,8 +158,6 @@
 #define LOCOMO_LPT_TOH(TOH)	((TOH & 0x7) << 4)
 #define LOCOMO_LPT_TOL(TOL)	((TOL & 0x7))
 
-extern struct bus_type locomo_bus_type;
-
 #define LOCOMO_DEVID_KEYBOARD	0
 #define LOCOMO_DEVID_FRONTLIGHT	1
 #define LOCOMO_DEVID_BACKLIGHT	2
diff --git linux-libre-6.7-gnu/arch/arm/include/asm/io.h linux-libre-6.8-gnu/arch/arm/include/asm/io.h
index 56b08ed6cc3b..1815748f5d2a 100644
--- linux-libre-6.7-gnu/arch/arm/include/asm/io.h
+++ linux-libre-6.8-gnu/arch/arm/include/asm/io.h
@@ -407,12 +407,6 @@ struct pci_dev;
 #define pci_iounmap pci_iounmap
 extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
 #include <asm-generic/io.h>
 
 #ifdef CONFIG_MMU
diff --git linux-libre-6.7-gnu/arch/arm/include/asm/irq_work.h linux-libre-6.8-gnu/arch/arm/include/asm/irq_work.h
index 3149e4dc1b54..8895999834cc 100644
--- linux-libre-6.7-gnu/arch/arm/include/asm/irq_work.h
+++ linux-libre-6.8-gnu/arch/arm/include/asm/irq_work.h
@@ -9,6 +9,4 @@ static inline bool arch_irq_work_has_interrupt(void)
 	return is_smp();
 }
 
-extern void arch_irq_work_raise(void);
-
 #endif /* _ASM_ARM_IRQ_WORK_H */
diff --git linux-libre-6.7-gnu/arch/arm/include/asm/jump_label.h linux-libre-6.8-gnu/arch/arm/include/asm/jump_label.h
index e12d7d096fc0..e4eb54f6cd9f 100644
--- linux-libre-6.7-gnu/arch/arm/include/asm/jump_label.h
+++ linux-libre-6.8-gnu/arch/arm/include/asm/jump_label.h
@@ -11,7 +11,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 WASM(nop) "\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"
@@ -25,7 +25,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 WASM(b) " %l[l_yes]\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"
diff --git linux-libre-6.7-gnu/arch/arm/include/asm/pgtable.h linux-libre-6.8-gnu/arch/arm/include/asm/pgtable.h
index 16b02f44c7d3..d657b84b6bf7 100644
--- linux-libre-6.7-gnu/arch/arm/include/asm/pgtable.h
+++ linux-libre-6.8-gnu/arch/arm/include/asm/pgtable.h
@@ -151,6 +151,8 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
+#define pgdp_get(pgpd)		READ_ONCE(*pgdp)
+
 #define pud_page(pud)		pmd_page(__pmd(pud_val(pud)))
 #define pud_write(pud)		pmd_write(__pmd(pud_val(pud)))
 
diff --git linux-libre-6.7-gnu/arch/arm/include/asm/topology.h linux-libre-6.8-gnu/arch/arm/include/asm/topology.h
index c7d2510e5a78..853c4f81ba4a 100644
--- linux-libre-6.7-gnu/arch/arm/include/asm/topology.h
+++ linux-libre-6.8-gnu/arch/arm/include/asm/topology.h
@@ -13,6 +13,7 @@
 #define arch_set_freq_scale topology_set_freq_scale
 #define arch_scale_freq_capacity topology_get_freq_scale
 #define arch_scale_freq_invariant topology_scale_freq_invariant
+#define arch_scale_freq_ref topology_get_freq_ref
 #endif
 
 /* Replace task scheduler's default cpu-invariant accounting */
diff --git linux-libre-6.7-gnu/arch/arm/include/asm/vdso.h linux-libre-6.8-gnu/arch/arm/include/asm/vdso.h
index 422c3afa806a..5b85889f82ee 100644
--- linux-libre-6.7-gnu/arch/arm/include/asm/vdso.h
+++ linux-libre-6.8-gnu/arch/arm/include/asm/vdso.h
@@ -24,11 +24,6 @@ static inline void arm_install_vdso(struct mm_struct *mm, unsigned long addr)
 
 #endif /* CONFIG_VDSO */
 
-int __vdso_clock_gettime(clockid_t clock, struct old_timespec32 *ts);
-int __vdso_clock_gettime64(clockid_t clock, struct __kernel_timespec *ts);
-int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz);
-int __vdso_clock_getres(clockid_t clock_id, struct old_timespec32 *res);
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
diff --git linux-libre-6.7-gnu/arch/arm/kernel/atags_proc.c linux-libre-6.8-gnu/arch/arm/kernel/atags_proc.c
index 3ec2afe78423..cd09f8ab93e3 100644
--- linux-libre-6.7-gnu/arch/arm/kernel/atags_proc.c
+++ linux-libre-6.8-gnu/arch/arm/kernel/atags_proc.c
@@ -7,7 +7,7 @@
 
 struct buffer {
 	size_t size;
-	char data[];
+	char data[] __counted_by(size);
 };
 
 static ssize_t atags_read(struct file *file, char __user *buf,
@@ -54,7 +54,7 @@ static int __init init_atags_procfs(void)
 
 	WARN_ON(tag->hdr.tag != ATAG_NONE);
 
-	b = kmalloc(sizeof(*b) + size, GFP_KERNEL);
+	b = kmalloc(struct_size(b, data, size), GFP_KERNEL);
 	if (!b)
 		goto nomem;
 
diff --git linux-libre-6.7-gnu/arch/arm/kernel/perf_event_v6.c linux-libre-6.8-gnu/arch/arm/kernel/perf_event_v6.c
index 1ae99deeec54..d9fd53841591 100644
--- linux-libre-6.7-gnu/arch/arm/kernel/perf_event_v6.c
+++ linux-libre-6.8-gnu/arch/arm/kernel/perf_event_v6.c
@@ -113,69 +113,6 @@ static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
 };
 
-enum armv6mpcore_perf_types {
-	ARMV6MPCORE_PERFCTR_ICACHE_MISS	    = 0x0,
-	ARMV6MPCORE_PERFCTR_IBUF_STALL	    = 0x1,
-	ARMV6MPCORE_PERFCTR_DDEP_STALL	    = 0x2,
-	ARMV6MPCORE_PERFCTR_ITLB_MISS	    = 0x3,
-	ARMV6MPCORE_PERFCTR_DTLB_MISS	    = 0x4,
-	ARMV6MPCORE_PERFCTR_BR_EXEC	    = 0x5,
-	ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
-	ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
-	ARMV6MPCORE_PERFCTR_INSTR_EXEC	    = 0x8,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
-	ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
-	ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
-	ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
-	ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
-	ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
-	ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
-	ARMV6MPCORE_PERFCTR_CPU_CYCLES	    = 0xFF,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV6MPCORE_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV6MPCORE_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV6MPCORE_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV6MPCORE_PERFCTR_IBUF_STALL,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV6MPCORE_PERFCTR_LSU_FULL_STALL,
-};
-
-static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
-
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_ICACHE_MISS,
-
-	/*
-	 * The ARM performance counters can count micro DTLB misses, micro ITLB
-	 * misses and main TLB misses. There isn't an event for TLB misses, so
-	 * use the micro misses here and if users want the main TLB misses they
-	 * can use a raw counter.
-	 */
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_DTLB_MISS,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_DTLB_MISS,
-
-	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_ITLB_MISS,
-	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_ITLB_MISS,
-};
-
 static inline unsigned long
 armv6_pmcr_read(void)
 {
@@ -268,10 +205,8 @@ static inline void armv6pmu_write_counter(struct perf_event *event, u64 value)
 
 static void armv6pmu_enable_event(struct perf_event *event)
 {
-	unsigned long val, mask, evt, flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+	unsigned long val, mask, evt;
 	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	if (ARMV6_CYCLE_COUNTER == idx) {
@@ -294,12 +229,10 @@ static void armv6pmu_enable_event(struct perf_event *event)
 	 * Mask out the current event and set the counter to count the event
 	 * that we're interested in.
 	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = armv6_pmcr_read();
 	val &= ~mask;
 	val |= evt;
 	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static irqreturn_t
@@ -362,26 +295,20 @@ armv6pmu_handle_irq(struct arm_pmu *cpu_pmu)
 
 static void armv6pmu_start(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+	unsigned long val;
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = armv6_pmcr_read();
 	val |= ARMV6_PMCR_ENABLE;
 	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void armv6pmu_stop(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+	unsigned long val;
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = armv6_pmcr_read();
 	val &= ~ARMV6_PMCR_ENABLE;
 	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static int
@@ -419,10 +346,8 @@ static void armv6pmu_clear_event_idx(struct pmu_hw_events *cpuc,
 
 static void armv6pmu_disable_event(struct perf_event *event)
 {
-	unsigned long val, mask, evt, flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+	unsigned long val, mask, evt;
 	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	if (ARMV6_CYCLE_COUNTER == idx) {
@@ -444,43 +369,10 @@ static void armv6pmu_disable_event(struct perf_event *event)
 	 * of ETM bus signal assertion cycles. The external reporting should
 	 * be disabled and so this should never increment.
 	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void armv6mpcore_pmu_disable_event(struct perf_event *event)
-{
-	unsigned long val, mask, flags, evt = 0;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-	int idx = hwc->idx;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= ARMV6_PMCR_CCOUNT_IEN;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_COUNT0_IEN;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_COUNT1_IEN;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Unlike UP ARMv6, we don't have a way of stopping the counters. We
-	 * simply disable the interrupt reporting.
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = armv6_pmcr_read();
 	val &= ~mask;
 	val |= evt;
 	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static int armv6_map_event(struct perf_event *event)
@@ -525,40 +417,7 @@ static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }
 
-/*
- * ARMv6mpcore is almost identical to single core ARMv6 with the exception
- * that some of the events have different enumerations and that there is no
- * *hack* to stop the programmable counters. To stop the counters we simply
- * disable the interrupt reporting and update the event. When unthrottling we
- * reset the period and enable the interrupt reporting.
- */
-
-static int armv6mpcore_map_event(struct perf_event *event)
-{
-	return armpmu_map_event(event, &armv6mpcore_perf_map,
-				&armv6mpcore_perf_cache_map, 0xFF);
-}
-
-static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	cpu_pmu->name		= "armv6_11mpcore";
-	cpu_pmu->handle_irq	= armv6pmu_handle_irq;
-	cpu_pmu->enable		= armv6pmu_enable_event;
-	cpu_pmu->disable	= armv6mpcore_pmu_disable_event;
-	cpu_pmu->read_counter	= armv6pmu_read_counter;
-	cpu_pmu->write_counter	= armv6pmu_write_counter;
-	cpu_pmu->get_event_idx	= armv6pmu_get_event_idx;
-	cpu_pmu->clear_event_idx = armv6pmu_clear_event_idx;
-	cpu_pmu->start		= armv6pmu_start;
-	cpu_pmu->stop		= armv6pmu_stop;
-	cpu_pmu->map_event	= armv6mpcore_map_event;
-	cpu_pmu->num_events	= 3;
-
-	return 0;
-}
-
 static const struct of_device_id armv6_pmu_of_device_ids[] = {
-	{.compatible = "arm,arm11mpcore-pmu",	.data = armv6mpcore_pmu_init},
 	{.compatible = "arm,arm1176-pmu",	.data = armv6_1176_pmu_init},
 	{.compatible = "arm,arm1136-pmu",	.data = armv6_1136_pmu_init},
 	{ /* sentinel value */ }
@@ -568,7 +427,6 @@ static const struct pmu_probe_info armv6_pmu_probe_table[] = {
 	ARM_PMU_PROBE(ARM_CPU_PART_ARM1136, armv6_1136_pmu_init),
 	ARM_PMU_PROBE(ARM_CPU_PART_ARM1156, armv6_1156_pmu_init),
 	ARM_PMU_PROBE(ARM_CPU_PART_ARM1176, armv6_1176_pmu_init),
-	ARM_PMU_PROBE(ARM_CPU_PART_ARM11MPCORE, armv6mpcore_pmu_init),
 	{ /* sentinel value */ }
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/kernel/perf_event_v7.c linux-libre-6.8-gnu/arch/arm/kernel/perf_event_v7.c
index eb2190477da1..a3322e2b3ea4 100644
--- linux-libre-6.7-gnu/arch/arm/kernel/perf_event_v7.c
+++ linux-libre-6.8-gnu/arch/arm/kernel/perf_event_v7.c
@@ -870,10 +870,8 @@ static void armv7_pmnc_dump_regs(struct arm_pmu *cpu_pmu)
 
 static void armv7pmu_enable_event(struct perf_event *event)
 {
-	unsigned long flags;
 	struct hw_perf_event *hwc = &event->hw;
 	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
@@ -886,7 +884,6 @@ static void armv7pmu_enable_event(struct perf_event *event)
 	 * Enable counter and interrupt, and set the counter to count
 	 * the event that we're interested in.
 	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
 	/*
 	 * Disable counter
@@ -910,16 +907,12 @@ static void armv7pmu_enable_event(struct perf_event *event)
 	 * Enable counter
 	 */
 	armv7_pmnc_enable_counter(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void armv7pmu_disable_event(struct perf_event *event)
 {
-	unsigned long flags;
 	struct hw_perf_event *hwc = &event->hw;
 	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
@@ -931,7 +924,6 @@ static void armv7pmu_disable_event(struct perf_event *event)
 	/*
 	 * Disable counter and interrupt
 	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
 	/*
 	 * Disable counter
@@ -942,8 +934,6 @@ static void armv7pmu_disable_event(struct perf_event *event)
 	 * Disable interrupt for this counter
 	 */
 	armv7_pmnc_disable_intens(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static irqreturn_t armv7pmu_handle_irq(struct arm_pmu *cpu_pmu)
@@ -1009,24 +999,14 @@ static irqreturn_t armv7pmu_handle_irq(struct arm_pmu *cpu_pmu)
 
 static void armv7pmu_start(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	/* Enable all counters */
 	armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void armv7pmu_stop(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	/* Disable all counters */
 	armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc,
@@ -1072,8 +1052,10 @@ static int armv7pmu_set_event_filter(struct hw_perf_event *event,
 {
 	unsigned long config_base = 0;
 
-	if (attr->exclude_idle)
-		return -EPERM;
+	if (attr->exclude_idle) {
+		pr_debug("ARM performance counters do not support mode exclusion\n");
+		return -EOPNOTSUPP;
+	}
 	if (attr->exclude_user)
 		config_base |= ARMV7_EXCLUDE_USER;
 	if (attr->exclude_kernel)
@@ -1492,14 +1474,10 @@ static void krait_clearpmu(u32 config_base)
 
 static void krait_pmu_disable_event(struct perf_event *event)
 {
-	unsigned long flags;
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 
 	/* Disable counter and interrupt */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
 	/* Disable counter */
 	armv7_pmnc_disable_counter(idx);
@@ -1512,23 +1490,17 @@ static void krait_pmu_disable_event(struct perf_event *event)
 
 	/* Disable interrupt for this counter */
 	armv7_pmnc_disable_intens(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void krait_pmu_enable_event(struct perf_event *event)
 {
-	unsigned long flags;
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 
 	/*
 	 * Enable counter and interrupt, and set the counter to count
 	 * the event that we're interested in.
 	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
 	/* Disable counter */
 	armv7_pmnc_disable_counter(idx);
@@ -1548,8 +1520,6 @@ static void krait_pmu_enable_event(struct perf_event *event)
 
 	/* Enable counter */
 	armv7_pmnc_enable_counter(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void krait_pmu_reset(void *info)
@@ -1825,14 +1795,10 @@ static void scorpion_clearpmu(u32 config_base)
 
 static void scorpion_pmu_disable_event(struct perf_event *event)
 {
-	unsigned long flags;
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 
 	/* Disable counter and interrupt */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
 	/* Disable counter */
 	armv7_pmnc_disable_counter(idx);
@@ -1845,23 +1811,17 @@ static void scorpion_pmu_disable_event(struct perf_event *event)
 
 	/* Disable interrupt for this counter */
 	armv7_pmnc_disable_intens(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void scorpion_pmu_enable_event(struct perf_event *event)
 {
-	unsigned long flags;
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 
 	/*
 	 * Enable counter and interrupt, and set the counter to count
 	 * the event that we're interested in.
 	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 
 	/* Disable counter */
 	armv7_pmnc_disable_counter(idx);
@@ -1881,8 +1841,6 @@ static void scorpion_pmu_enable_event(struct perf_event *event)
 
 	/* Enable counter */
 	armv7_pmnc_enable_counter(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void scorpion_pmu_reset(void *info)
diff --git linux-libre-6.7-gnu/arch/arm/kernel/perf_event_xscale.c linux-libre-6.8-gnu/arch/arm/kernel/perf_event_xscale.c
index f6cdcacfb96d..7a2ba1c689a7 100644
--- linux-libre-6.7-gnu/arch/arm/kernel/perf_event_xscale.c
+++ linux-libre-6.8-gnu/arch/arm/kernel/perf_event_xscale.c
@@ -203,10 +203,8 @@ xscale1pmu_handle_irq(struct arm_pmu *cpu_pmu)
 
 static void xscale1pmu_enable_event(struct perf_event *event)
 {
-	unsigned long val, mask, evt, flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+	unsigned long val, mask, evt;
 	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	switch (idx) {
@@ -229,20 +227,16 @@ static void xscale1pmu_enable_event(struct perf_event *event)
 		return;
 	}
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = xscale1pmu_read_pmnc();
 	val &= ~mask;
 	val |= evt;
 	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void xscale1pmu_disable_event(struct perf_event *event)
 {
-	unsigned long val, mask, evt, flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+	unsigned long val, mask, evt;
 	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	switch (idx) {
@@ -263,12 +257,10 @@ static void xscale1pmu_disable_event(struct perf_event *event)
 		return;
 	}
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = xscale1pmu_read_pmnc();
 	val &= ~mask;
 	val |= evt;
 	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static int
@@ -300,26 +292,20 @@ static void xscalepmu_clear_event_idx(struct pmu_hw_events *cpuc,
 
 static void xscale1pmu_start(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+	unsigned long val;
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = xscale1pmu_read_pmnc();
 	val |= XSCALE_PMU_ENABLE;
 	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void xscale1pmu_stop(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+	unsigned long val;
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = xscale1pmu_read_pmnc();
 	val &= ~XSCALE_PMU_ENABLE;
 	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static inline u64 xscale1pmu_read_counter(struct perf_event *event)
@@ -549,10 +535,8 @@ xscale2pmu_handle_irq(struct arm_pmu *cpu_pmu)
 
 static void xscale2pmu_enable_event(struct perf_event *event)
 {
-	unsigned long flags, ien, evtsel;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+	unsigned long ien, evtsel;
 	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	ien = xscale2pmu_read_int_enable();
@@ -587,18 +571,14 @@ static void xscale2pmu_enable_event(struct perf_event *event)
 		return;
 	}
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	xscale2pmu_write_event_select(evtsel);
 	xscale2pmu_write_int_enable(ien);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void xscale2pmu_disable_event(struct perf_event *event)
 {
-	unsigned long flags, ien, evtsel, of_flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+	unsigned long ien, evtsel, of_flags;
 	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
 	int idx = hwc->idx;
 
 	ien = xscale2pmu_read_int_enable();
@@ -638,11 +618,9 @@ static void xscale2pmu_disable_event(struct perf_event *event)
 		return;
 	}
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	xscale2pmu_write_event_select(evtsel);
 	xscale2pmu_write_int_enable(ien);
 	xscale2pmu_write_overflow_flags(of_flags);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static int
@@ -663,26 +641,20 @@ out:
 
 static void xscale2pmu_start(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+	unsigned long val;
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
 	val |= XSCALE_PMU_ENABLE;
 	xscale2pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static void xscale2pmu_stop(struct arm_pmu *cpu_pmu)
 {
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+	unsigned long val;
 
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	val = xscale2pmu_read_pmnc();
 	val &= ~XSCALE_PMU_ENABLE;
 	xscale2pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
 static inline u64 xscale2pmu_read_counter(struct perf_event *event)
diff --git linux-libre-6.7-gnu/arch/arm/mach-airoha/airoha.c linux-libre-6.8-gnu/arch/arm/mach-airoha/airoha.c
deleted file mode 100644
index ea23b5abb478..000000000000
--- linux-libre-6.7-gnu/arch/arm/mach-airoha/airoha.c
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Device Tree support for Airoha SoCs
- *
- * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
- */
-#include <asm/mach/arch.h>
-
-static const char * const airoha_board_dt_compat[] = {
-	"airoha,en7523",
-	NULL,
-};
-
-DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
-	.dt_compat	= airoha_board_dt_compat,
-MACHINE_END
diff --git linux-libre-6.7-gnu/arch/arm/mach-asm9260/Kconfig linux-libre-6.8-gnu/arch/arm/mach-asm9260/Kconfig
deleted file mode 100644
index 74e0f61c74c8..000000000000
--- linux-libre-6.7-gnu/arch/arm/mach-asm9260/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config MACH_ASM9260
-	bool "Alphascale ASM9260"
-	depends on ARCH_MULTI_V5
-	depends on CPU_LITTLE_ENDIAN
-	select CPU_ARM926T
-	select ASM9260_TIMER
-	help
-	  Support for Alphascale ASM9260 based platform.
diff --git linux-libre-6.7-gnu/arch/arm/mach-at91/pm.c linux-libre-6.8-gnu/arch/arm/mach-at91/pm.c
index 1a26af0fabc7..345b91dc6627 100644
--- linux-libre-6.7-gnu/arch/arm/mach-at91/pm.c
+++ linux-libre-6.8-gnu/arch/arm/mach-at91/pm.c
@@ -1103,6 +1103,7 @@ static void __init at91_pm_secure_init(void)
 	if (res.a0 == 0) {
 		pr_info("AT91: Secure PM: suspend mode set to %s\n",
 			pm_modes[suspend_mode].pattern);
+		soc_pm.data.mode = suspend_mode;
 		return;
 	}
 
@@ -1112,6 +1113,7 @@ static void __init at91_pm_secure_init(void)
 	res = sam_smccc_call(SAMA5_SMC_SIP_GET_SUSPEND_MODE, 0, 0);
 	if (res.a0 == 0) {
 		pr_warn("AT91: Secure PM: failed to get default mode\n");
+		soc_pm.data.mode = -1;
 		return;
 	}
 
@@ -1119,6 +1121,7 @@ static void __init at91_pm_secure_init(void)
 		pm_modes[suspend_mode].pattern);
 
 	soc_pm.data.suspend_mode = res.a1;
+	soc_pm.data.mode = soc_pm.data.suspend_mode;
 }
 static const struct of_device_id atmel_shdwc_ids[] = {
 	{ .compatible = "atmel,sama5d2-shdwc" },
diff --git linux-libre-6.7-gnu/arch/arm/mach-davinci/Kconfig linux-libre-6.8-gnu/arch/arm/mach-davinci/Kconfig
index 4316e1370627..2a8a9fe46586 100644
--- linux-libre-6.7-gnu/arch/arm/mach-davinci/Kconfig
+++ linux-libre-6.8-gnu/arch/arm/mach-davinci/Kconfig
@@ -4,12 +4,14 @@ menuconfig ARCH_DAVINCI
 	bool "TI DaVinci"
 	depends on ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
 	select DAVINCI_TIMER
 	select ZONE_DMA
 	select PM_GENERIC_DOMAINS if PM
 	select PM_GENERIC_DOMAINS_OF if PM && OF
 	select REGMAP_MMIO
 	select RESET_CONTROLLER
+	select PINCTRL
 	select PINCTRL_SINGLE
 
 if ARCH_DAVINCI
diff --git linux-libre-6.7-gnu/arch/arm/mach-ep93xx/core.c linux-libre-6.8-gnu/arch/arm/mach-ep93xx/core.c
index 71b113976420..8b1ec60a9a46 100644
--- linux-libre-6.7-gnu/arch/arm/mach-ep93xx/core.c
+++ linux-libre-6.8-gnu/arch/arm/mach-ep93xx/core.c
@@ -339,6 +339,7 @@ static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
 				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP_IDX("G", 0, NULL, 1,
 				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 
diff --git linux-libre-6.7-gnu/arch/arm/mach-ep93xx/edb93xx.c linux-libre-6.8-gnu/arch/arm/mach-ep93xx/edb93xx.c
index 4b90899a66e9..dbdb822a0100 100644
--- linux-libre-6.7-gnu/arch/arm/mach-ep93xx/edb93xx.c
+++ linux-libre-6.8-gnu/arch/arm/mach-ep93xx/edb93xx.c
@@ -88,7 +88,7 @@ static void __init edb93xx_register_i2c(void)
  * EDB93xx SPI peripheral handling
  *************************************************************************/
 static struct cs4271_platform_data edb93xx_cs4271_data = {
-	.gpio_nreset	= -EINVAL,	/* filled in later */
+	/* Intentionally left blank */
 };
 
 static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
@@ -114,14 +114,38 @@ static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
 	/* Intentionally left blank */
 };
 
+static struct gpiod_lookup_table edb93xx_cs4272_edb9301_gpio_table = {
+	.dev_id = "spi0.0", /* CS0 on SPI0 */
+	.table = {
+		GPIO_LOOKUP("A", 1, "reset", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table edb93xx_cs4272_edb9302_gpio_table = {
+	.dev_id = "spi0.0", /* CS0 on SPI0 */
+	.table = {
+		GPIO_LOOKUP("H", 2, "reset", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table edb93xx_cs4272_edb9315_gpio_table = {
+	.dev_id = "spi0.0", /* CS0 on SPI0 */
+	.table = {
+		GPIO_LOOKUP("B", 6, "reset", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init edb93xx_register_spi(void)
 {
 	if (machine_is_edb9301() || machine_is_edb9302())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
+		gpiod_add_lookup_table(&edb93xx_cs4272_edb9301_gpio_table);
 	else if (machine_is_edb9302a() || machine_is_edb9307a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
+		gpiod_add_lookup_table(&edb93xx_cs4272_edb9302_gpio_table);
 	else if (machine_is_edb9315a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
+		gpiod_add_lookup_table(&edb93xx_cs4272_edb9315_gpio_table);
 
 	gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table);
 	ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
diff --git linux-libre-6.7-gnu/arch/arm/mach-ep93xx/vision_ep9307.c linux-libre-6.8-gnu/arch/arm/mach-ep93xx/vision_ep9307.c
index 30d9cf3791eb..9471938df64c 100644
--- linux-libre-6.7-gnu/arch/arm/mach-ep93xx/vision_ep9307.c
+++ linux-libre-6.8-gnu/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -164,7 +164,7 @@ static struct i2c_board_info vision_i2c_info[] __initdata = {
  * SPI CS4271 Audio Codec
  *************************************************************************/
 static struct cs4271_platform_data vision_cs4271_data = {
-	.gpio_nreset	= EP93XX_GPIO_LINE_H(2),
+	/* Intentionally left blank */
 };
 
 /*************************************************************************
@@ -241,6 +241,15 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
 	},
 };
 
+static struct gpiod_lookup_table vision_spi_cs4271_gpio_table = {
+	.dev_id = "spi0.0", /* cs4271 @ CS0 */
+	.table = {
+		/* RESET */
+		GPIO_LOOKUP_IDX("H", 2, NULL, 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct gpiod_lookup_table vision_spi_cs_gpio_table = {
 	.dev_id = "spi0",
 	.table = {
@@ -292,6 +301,7 @@ static void __init vision_init_machine(void)
 
 	ep93xx_register_i2c(vision_i2c_info,
 				ARRAY_SIZE(vision_i2c_info));
+	gpiod_add_lookup_table(&vision_spi_cs4271_gpio_table);
 	gpiod_add_lookup_table(&vision_spi_mmc_gpio_table);
 	gpiod_add_lookup_table(&vision_spi_cs_gpio_table);
 	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
diff --git linux-libre-6.7-gnu/arch/arm/mach-imx/mmdc.c linux-libre-6.8-gnu/arch/arm/mach-imx/mmdc.c
index df69af932375..444a7eaa320c 100644
--- linux-libre-6.7-gnu/arch/arm/mach-imx/mmdc.c
+++ linux-libre-6.8-gnu/arch/arm/mach-imx/mmdc.c
@@ -13,7 +13,8 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/perf_event.h>
 #include <linux/slab.h>
 
@@ -103,7 +104,7 @@ struct mmdc_pmu {
 	struct device *dev;
 	struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
 	struct hlist_node node;
-	struct fsl_mmdc_devtype_data *devtype_data;
+	const struct fsl_mmdc_devtype_data *devtype_data;
 	struct clk *mmdc_ipg_clk;
 };
 
@@ -474,8 +475,6 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 	struct mmdc_pmu *pmu_mmdc;
 	char *name;
 	int ret;
-	const struct of_device_id *of_id =
-		of_match_device(imx_mmdc_dt_ids, &pdev->dev);
 
 	pmu_mmdc = kzalloc(sizeof(*pmu_mmdc), GFP_KERNEL);
 	if (!pmu_mmdc) {
@@ -507,7 +506,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 	}
 
 	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
-	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
+	pmu_mmdc->devtype_data = device_get_match_data(&pdev->dev);
 
 	hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
 			HRTIMER_MODE_REL);
diff --git linux-libre-6.7-gnu/arch/arm/mach-moxart/Kconfig linux-libre-6.8-gnu/arch/arm/mach-moxart/Kconfig
deleted file mode 100644
index 909c6573ba8b..000000000000
--- linux-libre-6.7-gnu/arch/arm/mach-moxart/Kconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_MOXART
-	bool "MOXA ART SoC"
-	depends on ARCH_MULTI_V4
-	depends on CPU_LITTLE_ENDIAN
-	select CPU_FA526
-	select ARM_DMA_MEM_BUFFERABLE
-	select FARADAY_FTINTC010
-	select FTTMR010_TIMER
-	select GPIOLIB
-	select PHYLIB if NETDEVICES
-	help
-	  Say Y here if you want to run your kernel on hardware with a
-	  MOXA ART SoC.
-	  The MOXA ART SoC is based on a Faraday FA526 ARMv4 32-bit
-	  192 MHz CPU with MMU and 16KB/8KB D/I-cache (UC-7112-LX).
-	  Used on models UC-7101, UC-7112/UC-7110, IA240/IA241, IA3341.
-
-if ARCH_MOXART
-
-config MACH_UC7112LX
-	bool "MOXA UC-7112-LX"
-	depends on ARCH_MOXART
-	help
-	  Say Y here if you intend to run this kernel on a MOXA
-	  UC-7112-LX embedded computer.
-
-endif
diff --git linux-libre-6.7-gnu/arch/arm/mach-moxart/Makefile linux-libre-6.8-gnu/arch/arm/mach-moxart/Makefile
deleted file mode 100644
index ded3e38fb98d..000000000000
--- linux-libre-6.7-gnu/arch/arm/mach-moxart/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Object file lists.
-
-obj-$(CONFIG_MACH_UC7112LX)	+= moxart.o
diff --git linux-libre-6.7-gnu/arch/arm/mach-moxart/moxart.c linux-libre-6.8-gnu/arch/arm/mach-moxart/moxart.c
deleted file mode 100644
index f1f58c0c0fa1..000000000000
--- linux-libre-6.7-gnu/arch/arm/mach-moxart/moxart.c
+++ /dev/null
@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-moxart/moxart.c
- *
- * (C) Copyright 2013, Jonas Jensen <jonas.jensen@gmail.com>
- */
diff --git linux-libre-6.7-gnu/arch/arm/mach-mxs/mach-mxs.c linux-libre-6.8-gnu/arch/arm/mach-mxs/mach-mxs.c
index 3faf9a1e3e36..6e017fa306c8 100644
--- linux-libre-6.7-gnu/arch/arm/mach-mxs/mach-mxs.c
+++ linux-libre-6.8-gnu/arch/arm/mach-mxs/mach-mxs.c
@@ -356,7 +356,9 @@ static int __init mxs_restart_init(void)
 {
 	struct device_node *np;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
+	if (!np)
+		np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
 	reset_addr = of_iomap(np, 0);
 	if (!reset_addr)
 		return -ENODEV;
diff --git linux-libre-6.7-gnu/arch/arm/mach-nspire/Kconfig linux-libre-6.8-gnu/arch/arm/mach-nspire/Kconfig
deleted file mode 100644
index 0ffdcaca1e6b..000000000000
--- linux-libre-6.7-gnu/arch/arm/mach-nspire/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config ARCH_NSPIRE
-	bool "TI-NSPIRE based"
-	depends on ARCH_MULTI_V4T
-	depends on CPU_LITTLE_ENDIAN
-	select CPU_ARM926T
-	select GENERIC_IRQ_CHIP
-	select ARM_AMBA
-	select ARM_VIC
-	select ARM_TIMER_SP804
-	select NSPIRE_TIMER
-	select POWER_RESET
-	select POWER_RESET_SYSCON
-	help
-	  This enables support for systems using the TI-NSPIRE CPU
diff --git linux-libre-6.7-gnu/arch/arm/mach-nspire/nspire.c linux-libre-6.8-gnu/arch/arm/mach-nspire/nspire.c
deleted file mode 100644
index 2fbfc23237ff..000000000000
--- linux-libre-6.7-gnu/arch/arm/mach-nspire/nspire.c
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-
-#include <asm/mach/arch.h>
-
-static const char *const nspire_dt_match[] __initconst = {
-	"ti,nspire",
-	"ti,nspire-cx",
-	"ti,nspire-tp",
-	"ti,nspire-clp",
-	NULL,
-};
-
-DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
-	.dt_compat	= nspire_dt_match,
-MACHINE_END
diff --git linux-libre-6.7-gnu/arch/arm/mach-rda/Kconfig linux-libre-6.8-gnu/arch/arm/mach-rda/Kconfig
deleted file mode 100644
index 4d2e4e046cb3..000000000000
--- linux-libre-6.7-gnu/arch/arm/mach-rda/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_RDA
-	bool "RDA Micro SoCs"
-	depends on ARCH_MULTI_V7
-	select RDA_INTC
-	select RDA_TIMER
-	help
-	  This enables support for the RDA Micro 8810PL SoC family.
diff --git linux-libre-6.7-gnu/arch/arm/mach-s3c/mach-crag6410-module.c linux-libre-6.8-gnu/arch/arm/mach-s3c/mach-crag6410-module.c
index 8fce1e815ee8..2de1a89f6e99 100644
--- linux-libre-6.7-gnu/arch/arm/mach-s3c/mach-crag6410-module.c
+++ linux-libre-6.8-gnu/arch/arm/mach-s3c/mach-crag6410-module.c
@@ -32,9 +32,18 @@
 
 #include "crag6410.h"
 
+static struct gpiod_lookup_table wm0010_gpiod_table = {
+	.dev_id = "spi0.0", /* SPI device name */
+	.table = {
+		/* Active high for Glenfarclas Rev 2 */
+		GPIO_LOOKUP("GPION", 6,
+			    "reset", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm0010_pdata wm0010_pdata = {
-	.gpio_reset = S3C64XX_GPN(6),
-	.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
+	/* Intentionally left blank */
 };
 
 static struct spi_board_info wm1253_devs[] = {
@@ -61,10 +70,19 @@ static struct spi_board_info balblair_devs[] = {
 	},
 };
 
+static struct gpiod_lookup_table wm5100_gpiod_table = {
+	.dev_id = "1-001a", /* Device 001a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("wm5100", 3,
+			    "hp-pol", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm5100_pdata wm5100_pdata = {
-	.ldo_ena = S3C64XX_GPN(7),
 	.irq_flags = IRQF_TRIGGER_HIGH,
-	.gpio_base = CODEC_GPIO_BASE,
 
 	.in_mode = {
 		WM5100_IN_DIFF,
@@ -73,7 +91,6 @@ static struct wm5100_pdata wm5100_pdata = {
 		WM5100_IN_SE,
 	},
 
-	.hp_pol = CODEC_GPIO_BASE + 3,
 	.jack_modes = {
 		{ WM5100_MICDET_MICBIAS3, 0, 0 },
 		{ WM5100_MICDET_MICBIAS2, 1, 1 },
@@ -110,9 +127,16 @@ static struct wm8996_retune_mobile_config wm8996_retune[] = {
 	},
 };
 
+static struct gpiod_lookup_table wm8996_gpiod_table = {
+	.dev_id = "1-001a", /* Device 001a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm8996_pdata wm8996_pdata __initdata = {
-	.ldo_ena = S3C64XX_GPN(7),
-	.gpio_base = CODEC_GPIO_BASE,
 	.micdet_def = 1,
 	.inl_mode = WM8996_DIFFERRENTIAL_1,
 	.inr_mode = WM8996_DIFFERRENTIAL_1,
@@ -296,12 +320,20 @@ static const struct i2c_board_info wm6230_i2c_devs[] = {
 };
 
 static struct wm2200_pdata wm2200_pdata = {
-	.ldo_ena = S3C64XX_GPN(7),
 	.gpio_defaults = {
 		[2] = 0x0005,  /* GPIO3 24.576MHz output clock */
 	},
 };
 
+static struct gpiod_lookup_table wm2200_gpiod_table = {
+	.dev_id = "1-003a", /* Device 003a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static const struct i2c_board_info wm2200_i2c[] = {
 	{ I2C_BOARD_INFO("wm2200", 0x3a),
 	  .platform_data = &wm2200_pdata, },
@@ -337,18 +369,21 @@ static const struct {
 	{ .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
 	{ .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
 	{ .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
-	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
+	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs),
+	  .gpiod_table = &wm0010_gpiod_table },
 	{ .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
 	{ .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
 	{ .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",
 	  .spi_devs = balblair_devs,
 	  .num_spi_devs = ARRAY_SIZE(balblair_devs) },
 	{ .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu",
-	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs),
+	  .gpiod_table = &wm8996_gpiod_table },
 	{ .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory",
 	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
 	{ .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman",
-	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs),
+	  .gpiod_table = &wm5100_gpiod_table },
 	{ .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
 	{ .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
 	  .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs),
@@ -362,7 +397,8 @@ static const struct {
 	  .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs),
 	  .gpiod_table = &wm5102_gpiod_table },
 	{ .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1",
-	  .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
+	  .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c),
+	  .gpiod_table = &wm2200_gpiod_table },
 };
 
 static int wlf_gf_module_probe(struct i2c_client *i2c)
diff --git linux-libre-6.7-gnu/arch/arm/mach-s3c/mach-crag6410.c linux-libre-6.8-gnu/arch/arm/mach-s3c/mach-crag6410.c
index 7c4bed4370a1..e5df2cb51ab2 100644
--- linux-libre-6.7-gnu/arch/arm/mach-s3c/mach-crag6410.c
+++ linux-libre-6.8-gnu/arch/arm/mach-s3c/mach-crag6410.c
@@ -39,8 +39,6 @@
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
 
-#include <sound/wm1250-ev1.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
@@ -713,13 +711,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata = {
 	.disable_touch = true,
 };
 
-static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
-	.gpios = {
-		[WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12),
-		[WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12),
-		[WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13),
-		[WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14),
-		[WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8),
+static struct gpiod_lookup_table crag_wm1250_ev1_gpiod_table = {
+	/* The WM1250-EV1 is device 0027 on I2C bus 1 */
+	.dev_id = "1-0027",
+	.table = {
+		GPIO_LOOKUP("GPION", 12, "clk-ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 12, "clk-sel0", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 13, "clk-sel1", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 14, "osr", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 8, "master", GPIO_ACTIVE_HIGH),
+		{ },
 	},
 };
 
@@ -733,9 +734,7 @@ static struct i2c_board_info i2c_devs1[] = {
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x24) },
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
-
-	{ I2C_BOARD_INFO("wm1250-ev1", 0x27),
-	  .platform_data = &wm1250_ev1_pdata },
+	{ I2C_BOARD_INFO("wm1250-ev1", 0x27), },
 };
 
 static struct s3c2410_platform_i2c i2c1_pdata = {
@@ -862,6 +861,7 @@ static void __init crag6410_machine_init(void)
 
 	gpiod_add_lookup_table(&crag_pmic_gpiod_table);
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	gpiod_add_lookup_table(&crag_wm1250_ev1_gpiod_table);
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
 	samsung_keypad_set_platdata(&crag6410_keypad_data);
diff --git linux-libre-6.7-gnu/arch/arm/mach-sunplus/Kconfig linux-libre-6.8-gnu/arch/arm/mach-sunplus/Kconfig
deleted file mode 100644
index d0c2416e6f24..000000000000
--- linux-libre-6.7-gnu/arch/arm/mach-sunplus/Kconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-
-menuconfig ARCH_SUNPLUS
-	bool "Sunplus SoCs"
-	depends on ARCH_MULTI_V7
-	help
-	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
-	  such as the Banana Pi BPI-F2S development board (and derivatives).
-	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
-	  (<https://tibbo.com/store/plus1.html>)
-
-config SOC_SP7021
-	bool "Sunplus SP7021 SoC support"
-	depends on ARCH_SUNPLUS
-	default ARCH_SUNPLUS
-	select HAVE_ARM_ARCH_TIMER
-	select ARM_GIC
-	select ARM_PSCI
-	select PINCTRL
-	select PINCTRL_SPPCTL
-	select SERIAL_SUNPLUS if TTY
-	select SERIAL_SUNPLUS_CONSOLE if TTY
-	help
-	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
-	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
-	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
-	  It is designed for industrial control.
diff --git linux-libre-6.7-gnu/arch/arm/mach-sunplus/Makefile linux-libre-6.8-gnu/arch/arm/mach-sunplus/Makefile
deleted file mode 100644
index d211de6af2db..000000000000
--- linux-libre-6.7-gnu/arch/arm/mach-sunplus/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-$(CONFIG_SOC_SP7021)	+= sp7021.o
diff --git linux-libre-6.7-gnu/arch/arm/mach-sunplus/sp7021.c linux-libre-6.8-gnu/arch/arm/mach-sunplus/sp7021.c
deleted file mode 100644
index 774d0a5bd4eb..000000000000
--- linux-libre-6.7-gnu/arch/arm/mach-sunplus/sp7021.c
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Copyright (C) Sunplus Technology Co., Ltd.
- *       All rights reserved.
- */
-#include <linux/kernel.h>
-#include <asm/mach/arch.h>
-
-static const char *sp7021_compat[] __initconst = {
-	"sunplus,sp7021",
-	NULL
-};
-
-DT_MACHINE_START(SP7021_DT, "SP7021")
-	.dt_compat	= sp7021_compat,
-MACHINE_END
diff --git linux-libre-6.7-gnu/arch/arm/mach-uniphier/Kconfig linux-libre-6.8-gnu/arch/arm/mach-uniphier/Kconfig
deleted file mode 100644
index e661d2626675..000000000000
--- linux-libre-6.7-gnu/arch/arm/mach-uniphier/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config ARCH_UNIPHIER
-	bool "Socionext UniPhier SoCs"
-	depends on ARCH_MULTI_V7
-	select ARCH_HAS_RESET_CONTROLLER
-	select ARM_AMBA
-	select ARM_GLOBAL_TIMER
-	select ARM_GIC
-	select HAVE_ARM_SCU
-	select HAVE_ARM_TWD if SMP
-	select PINCTRL
-	select RESET_CONTROLLER
-	help
-	  Support for UniPhier SoC family developed by Socionext Inc.
-	  (formerly, System LSI Business Division of Panasonic Corporation)
diff --git linux-libre-6.7-gnu/arch/arm/mach-versatile/Kconfig linux-libre-6.8-gnu/arch/arm/mach-versatile/Kconfig
index b1519b4dc03a..e029270c2687 100644
--- linux-libre-6.7-gnu/arch/arm/mach-versatile/Kconfig
+++ linux-libre-6.8-gnu/arch/arm/mach-versatile/Kconfig
@@ -201,23 +201,6 @@ config REALVIEW_EB_A9MP
 	  Enable support for the Cortex-A9MPCore tile fitted to the
 	  Realview(R) Emulation Baseboard platform.
 
-config REALVIEW_EB_ARM11MP
-	bool "Support ARM11MPCore Tile"
-	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	select HAVE_SMP
-	help
-	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
-	  Emulation Baseboard platform.
-
-config MACH_REALVIEW_PB11MP
-	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
-	depends on ARCH_MULTI_V6
-	select HAVE_SMP
-	help
-	  Include support for the ARM(R) RealView(R) Platform Baseboard for
-	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
-	  support for PCI-E and Compact Flash.
-
 # ARMv6 CPU without K extensions, but does have the new exclusive ops
 config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
diff --git linux-libre-6.7-gnu/arch/arm/mach-versatile/platsmp-realview.c linux-libre-6.8-gnu/arch/arm/mach-versatile/platsmp-realview.c
index 5d363385c801..6965a1de727b 100644
--- linux-libre-6.7-gnu/arch/arm/mach-versatile/platsmp-realview.c
+++ linux-libre-6.8-gnu/arch/arm/mach-versatile/platsmp-realview.c
@@ -18,6 +18,11 @@
 #define REALVIEW_SYS_FLAGSSET_OFFSET	0x30
 
 static const struct of_device_id realview_scu_match[] = {
+	/*
+	 * The ARM11MP SCU compatible is only provided as fallback for
+	 * old RealView EB Cortex-A9 device trees that were using this
+	 * compatible by mistake.
+	 */
 	{ .compatible = "arm,arm11mp-scu", },
 	{ .compatible = "arm,cortex-a9-scu", },
 	{ .compatible = "arm,cortex-a5-scu", },
@@ -27,7 +32,6 @@ static const struct of_device_id realview_scu_match[] = {
 static const struct of_device_id realview_syscon_match[] = {
         { .compatible = "arm,core-module-integrator", },
         { .compatible = "arm,realview-eb-syscon", },
-        { .compatible = "arm,realview-pb11mp-syscon", },
         { .compatible = "arm,realview-pbx-syscon", },
         { },
 };
diff --git linux-libre-6.7-gnu/arch/arm/mach-versatile/realview.c linux-libre-6.8-gnu/arch/arm/mach-versatile/realview.c
index a3933e2373d5..36a6f6bc4fdd 100644
--- linux-libre-6.7-gnu/arch/arm/mach-versatile/realview.c
+++ linux-libre-6.8-gnu/arch/arm/mach-versatile/realview.c
@@ -9,7 +9,6 @@
 static const char *const realview_dt_platform_compat[] __initconst = {
 	"arm,realview-eb",
 	"arm,realview-pb1176",
-	"arm,realview-pb11mp",
 	"arm,realview-pba8",
 	"arm,realview-pbx",
 	NULL,
diff --git linux-libre-6.7-gnu/arch/arm/mm/Kconfig linux-libre-6.8-gnu/arch/arm/mm/Kconfig
index c164cde50243..2b6f50dd5478 100644
--- linux-libre-6.7-gnu/arch/arm/mm/Kconfig
+++ linux-libre-6.8-gnu/arch/arm/mm/Kconfig
@@ -937,24 +937,6 @@ config VDSO
 	  You must have glibc 2.22 or later for programs to seamlessly
 	  take advantage of this.
 
-config DMA_CACHE_RWFO
-	bool "Enable read/write for ownership DMA cache maintenance"
-	depends on CPU_V6K && SMP
-	default y
-	help
-	  The Snoop Control Unit on ARM11MPCore does not detect the
-	  cache maintenance operations and the dma_{map,unmap}_area()
-	  functions may leave stale cache entries on other CPUs. By
-	  enabling this option, Read or Write For Ownership in the ARMv6
-	  DMA cache maintenance functions is performed. These LDR/STR
-	  instructions change the cache line state to shared or modified
-	  so that the cache operation has the desired effect.
-
-	  Note that the workaround is only valid on processors that do
-	  not perform speculative loads into the D-cache. For such
-	  processors, if cache maintenance operations are not broadcast
-	  in hardware, other workarounds are needed (e.g. cache
-	  maintenance broadcasting in software via FIQ).
 
 config OUTER_CACHE
 	bool
diff --git linux-libre-6.7-gnu/arch/arm/mm/cache-v6.S linux-libre-6.8-gnu/arch/arm/mm/cache-v6.S
index 250c83bf7158..44211d8a296f 100644
--- linux-libre-6.7-gnu/arch/arm/mm/cache-v6.S
+++ linux-libre-6.8-gnu/arch/arm/mm/cache-v6.S
@@ -201,10 +201,6 @@ ENTRY(v6_flush_kern_dcache_area)
  *	- end     - virtual end address of region
  */
 v6_dma_inv_range:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrb	r2, [r0]			@ read for ownership
-	strb	r2, [r0]			@ write for ownership
-#endif
 	tst	r0, #D_CACHE_LINE_SIZE - 1
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
@@ -213,10 +209,6 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line
 #endif
 	tst	r1, #D_CACHE_LINE_SIZE - 1
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrbne	r2, [r1, #-1]			@ read for ownership
-	strbne	r2, [r1, #-1]			@ write for ownership
-#endif
 	bic	r1, r1, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
 	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line
@@ -231,10 +223,6 @@ v6_dma_inv_range:
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrlo	r2, [r0]			@ read for ownership
-	strlo	r2, [r0]			@ write for ownership
-#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
@@ -248,9 +236,6 @@ v6_dma_inv_range:
 v6_dma_clean_range:
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldr	r2, [r0]			@ read for ownership
-#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
 #else
@@ -269,10 +254,6 @@ v6_dma_clean_range:
  *	- end     - virtual end address of region
  */
 ENTRY(v6_dma_flush_range)
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrb	r2, [r0]		@ read for ownership
-	strb	r2, [r0]		@ write for ownership
-#endif
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
 #ifdef HARVARD_CACHE
@@ -282,10 +263,6 @@ ENTRY(v6_dma_flush_range)
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrblo	r2, [r0]			@ read for ownership
-	strblo	r2, [r0]			@ write for ownership
-#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
@@ -301,13 +278,7 @@ ENTRY(v6_dma_map_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_FROM_DEVICE
 	beq	v6_dma_inv_range
-#ifndef CONFIG_DMA_CACHE_RWFO
 	b	v6_dma_clean_range
-#else
-	teq	r2, #DMA_TO_DEVICE
-	beq	v6_dma_clean_range
-	b	v6_dma_flush_range
-#endif
 ENDPROC(v6_dma_map_area)
 
 /*
@@ -317,11 +288,9 @@ ENDPROC(v6_dma_map_area)
  *	- dir	- DMA direction
  */
 ENTRY(v6_dma_unmap_area)
-#ifndef CONFIG_DMA_CACHE_RWFO
 	add	r1, r1, r0
 	teq	r2, #DMA_TO_DEVICE
 	bne	v6_dma_inv_range
-#endif
 	ret	lr
 ENDPROC(v6_dma_unmap_area)
 
diff --git linux-libre-6.7-gnu/arch/arm/mm/dma-mapping-nommu.c linux-libre-6.8-gnu/arch/arm/mm/dma-mapping-nommu.c
index cfd9c933d2f0..b94850b57995 100644
--- linux-libre-6.7-gnu/arch/arm/mm/dma-mapping-nommu.c
+++ linux-libre-6.8-gnu/arch/arm/mm/dma-mapping-nommu.c
@@ -34,7 +34,7 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
 }
 
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+			bool coherent)
 {
 	if (IS_ENABLED(CONFIG_CPU_V7M)) {
 		/*
diff --git linux-libre-6.7-gnu/arch/arm/mm/dma-mapping.c linux-libre-6.8-gnu/arch/arm/mm/dma-mapping.c
index 5409225b4abc..f68db05eba29 100644
--- linux-libre-6.7-gnu/arch/arm/mm/dma-mapping.c
+++ linux-libre-6.8-gnu/arch/arm/mm/dma-mapping.c
@@ -859,10 +859,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
 	int i = 0;
 	int order_idx = 0;
 
-	if (array_size <= PAGE_SIZE)
-		pages = kzalloc(array_size, GFP_KERNEL);
-	else
-		pages = vzalloc(array_size);
+	pages = kvzalloc(array_size, GFP_KERNEL);
 	if (!pages)
 		return NULL;
 
@@ -1713,7 +1710,7 @@ void arm_iommu_detach_device(struct device *dev)
 EXPORT_SYMBOL_GPL(arm_iommu_detach_device);
 
 static void arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
-				    const struct iommu_ops *iommu, bool coherent)
+				    bool coherent)
 {
 	struct dma_iommu_mapping *mapping;
 
@@ -1748,7 +1745,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev)
 #else
 
 static void arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
-				    const struct iommu_ops *iommu, bool coherent)
+				    bool coherent)
 {
 }
 
@@ -1757,7 +1754,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev) { }
 #endif	/* CONFIG_ARM_DMA_USE_IOMMU */
 
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+			bool coherent)
 {
 	/*
 	 * Due to legacy code that sets the ->dma_coherent flag from a bus
@@ -1776,8 +1773,8 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 	if (dev->dma_ops)
 		return;
 
-	if (iommu)
-		arm_setup_iommu_dma_ops(dev, dma_base, size, iommu, coherent);
+	if (device_iommu_mapped(dev))
+		arm_setup_iommu_dma_ops(dev, dma_base, size, coherent);
 
 	xen_setup_dma_ops(dev);
 	dev->archdata.dma_ops_setup = true;
diff --git linux-libre-6.7-gnu/arch/arm/mm/fault.c linux-libre-6.8-gnu/arch/arm/mm/fault.c
index fef62e4a9edd..07565b593ed6 100644
--- linux-libre-6.7-gnu/arch/arm/mm/fault.c
+++ linux-libre-6.8-gnu/arch/arm/mm/fault.c
@@ -278,6 +278,37 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
 
+	if (!(flags & FAULT_FLAG_USER))
+		goto lock_mmap;
+
+	vma = lock_vma_under_rcu(mm, addr);
+	if (!vma)
+		goto lock_mmap;
+
+	if (!(vma->vm_flags & vm_flags)) {
+		vma_end_read(vma);
+		goto lock_mmap;
+	}
+	fault = handle_mm_fault(vma, addr, flags | FAULT_FLAG_VMA_LOCK, regs);
+	if (!(fault & (VM_FAULT_RETRY | VM_FAULT_COMPLETED)))
+		vma_end_read(vma);
+
+	if (!(fault & VM_FAULT_RETRY)) {
+		count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
+		goto done;
+	}
+	count_vm_vma_lock_event(VMA_LOCK_RETRY);
+	if (fault & VM_FAULT_MAJOR)
+		flags |= FAULT_FLAG_TRIED;
+
+	/* Quick path to respond to signals */
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			goto no_context;
+		return 0;
+	}
+lock_mmap:
+
 retry:
 	vma = lock_mm_and_find_vma(mm, addr, regs);
 	if (unlikely(!vma)) {
@@ -316,6 +347,7 @@ retry:
 	}
 
 	mmap_read_unlock(mm);
+done:
 
 	/*
 	 * Handle the "normal" case first - VM_FAULT_MAJOR
diff --git linux-libre-6.7-gnu/arch/arm/mm/kasan_init.c linux-libre-6.8-gnu/arch/arm/mm/kasan_init.c
index 24d71b5db62d..111d4f703136 100644
--- linux-libre-6.7-gnu/arch/arm/mm/kasan_init.c
+++ linux-libre-6.8-gnu/arch/arm/mm/kasan_init.c
@@ -28,6 +28,12 @@ static pgd_t tmp_pgd_table[PTRS_PER_PGD] __initdata __aligned(PGD_SIZE);
 
 pmd_t tmp_pmd_table[PTRS_PER_PMD] __page_aligned_bss;
 
+static __init void *kasan_alloc_block_raw(size_t size)
+{
+	return memblock_alloc_try_nid_raw(size, size, __pa(MAX_DMA_ADDRESS),
+				      MEMBLOCK_ALLOC_NOLEAKTRACE, NUMA_NO_NODE);
+}
+
 static __init void *kasan_alloc_block(size_t size)
 {
 	return memblock_alloc_try_nid(size, size, __pa(MAX_DMA_ADDRESS),
@@ -50,7 +56,7 @@ static void __init kasan_pte_populate(pmd_t *pmdp, unsigned long addr,
 			if (!pte_none(READ_ONCE(*ptep)))
 				continue;
 
-			p = kasan_alloc_block(PAGE_SIZE);
+			p = kasan_alloc_block_raw(PAGE_SIZE);
 			if (!p) {
 				panic("%s failed to allocate shadow page for address 0x%lx\n",
 				      __func__, addr);
diff --git linux-libre-6.7-gnu/arch/arm/tools/syscall.tbl linux-libre-6.8-gnu/arch/arm/tools/syscall.tbl
index 584f9528c996..b6c9e01e14f5 100644
--- linux-libre-6.7-gnu/arch/arm/tools/syscall.tbl
+++ linux-libre-6.8-gnu/arch/arm/tools/syscall.tbl
@@ -470,3 +470,8 @@
 454	common	futex_wake			sys_futex_wake
 455	common	futex_wait			sys_futex_wait
 456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
diff --git linux-libre-6.7-gnu/arch/arm/vdso/vgettimeofday.c linux-libre-6.8-gnu/arch/arm/vdso/vgettimeofday.c
index a003beacac76..3554aa35f1ba 100644
--- linux-libre-6.7-gnu/arch/arm/vdso/vgettimeofday.c
+++ linux-libre-6.8-gnu/arch/arm/vdso/vgettimeofday.c
@@ -8,6 +8,7 @@
 #include <linux/types.h>
 #include <asm/vdso.h>
 #include <asm/unwind.h>
+#include <vdso/gettime.h>
 
 int __vdso_clock_gettime(clockid_t clock,
 			 struct old_timespec32 *ts)
diff --git linux-libre-6.7-gnu/arch/arm/vfp/vfpmodule.c linux-libre-6.8-gnu/arch/arm/vfp/vfpmodule.c
index 7e8773a2d99d..b68efe643a12 100644
--- linux-libre-6.7-gnu/arch/arm/vfp/vfpmodule.c
+++ linux-libre-6.8-gnu/arch/arm/vfp/vfpmodule.c
@@ -800,6 +800,24 @@ static struct undef_hook neon_support_hook[] = {{
 	.cpsr_mask	= PSR_T_BIT,
 	.cpsr_val	= PSR_T_BIT,
 	.fn		= vfp_support_entry,
+}, {
+	.instr_mask	= 0xff000800,
+	.instr_val	= 0xfc000800,
+	.cpsr_mask	= 0,
+	.cpsr_val	= 0,
+	.fn		= vfp_support_entry,
+}, {
+	.instr_mask	= 0xff000800,
+	.instr_val	= 0xfd000800,
+	.cpsr_mask	= 0,
+	.cpsr_val	= 0,
+	.fn		= vfp_support_entry,
+}, {
+	.instr_mask	= 0xff000800,
+	.instr_val	= 0xfe000800,
+	.cpsr_mask	= 0,
+	.cpsr_val	= 0,
+	.fn		= vfp_support_entry,
 }};
 
 static struct undef_hook vfp_support_hook = {
diff --git linux-libre-6.7-gnu/arch/arm64/Kconfig linux-libre-6.8-gnu/arch/arm64/Kconfig
index 7b071a00425d..aa7c1d435139 100644
--- linux-libre-6.7-gnu/arch/arm64/Kconfig
+++ linux-libre-6.8-gnu/arch/arm64/Kconfig
@@ -36,6 +36,7 @@ config ARM64
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_DEVMAP
 	select ARCH_HAS_PTE_SPECIAL
+	select ARCH_HAS_HW_PTE_YOUNG
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_SET_MEMORY
@@ -132,6 +133,7 @@ config ARM64
 	select GENERIC_ARCH_TOPOLOGY
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_DEVICES
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
@@ -154,7 +156,7 @@ config ARM64
 	select HAVE_MOVE_PUD
 	select HAVE_PCI
 	select HAVE_ACPI_APEI if (ACPI && EFI)
-	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
+	select HAVE_ALIGNED_STRUCT_PAGE
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_BITREVERSE
 	select HAVE_ARCH_COMPILER_H
@@ -1037,8 +1039,12 @@ config ARM64_ERRATUM_2645198
 
 	  If unsure, say Y.
 
+config ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	bool
+
 config ARM64_ERRATUM_2966298
 	bool "Cortex-A520: 2966298: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
 	default y
 	help
 	  This option adds the workaround for ARM Cortex-A520 erratum 2966298.
@@ -1050,6 +1056,20 @@ config ARM64_ERRATUM_2966298
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_3117295
+	bool "Cortex-A510: 3117295: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 3117295.
+
+	  On an affected Cortex-A510 core, a speculatively executed unprivileged
+	  load might leak data from a privileged level via a cache side channel.
+
+	  Work around this problem by executing a TLBI before returning to EL0.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
@@ -1519,15 +1539,15 @@ config XEN
 
 # include/linux/mmzone.h requires the following to be true:
 #
-#   MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
+#   MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
 #
-# so the maximum value of MAX_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT:
+# so the maximum value of MAX_PAGE_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT:
 #
-#     | SECTION_SIZE_BITS |  PAGE_SHIFT  |  max MAX_ORDER  |  default MAX_ORDER |
-# ----+-------------------+--------------+-----------------+--------------------+
-# 4K  |       27          |      12      |       15        |         10         |
-# 16K |       27          |      14      |       13        |         11         |
-# 64K |       29          |      16      |       13        |         13         |
+#     | SECTION_SIZE_BITS |  PAGE_SHIFT  |  max MAX_PAGE_ORDER  |  default MAX_PAGE_ORDER |
+# ----+-------------------+--------------+----------------------+-------------------------+
+# 4K  |       27          |      12      |       15             |         10              |
+# 16K |       27          |      14      |       13             |         11              |
+# 64K |       29          |      16      |       13             |         13              |
 config ARCH_FORCE_MAX_ORDER
 	int
 	default "13" if ARM64_64K_PAGES
@@ -1535,21 +1555,21 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
 	  large blocks of physically contiguous memory is required.
 
 	  The maximal size of allocation cannot exceed the size of the
-	  section, so the value of MAX_ORDER should satisfy
+	  section, so the value of MAX_PAGE_ORDER should satisfy
 
-	    MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
+	    MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
 
 	  Don't change if unsure.
 
 config UNMAP_KERNEL_AT_EL0
-	bool "Unmap kernel when running in userspace (aka \"KAISER\")" if EXPERT
+	bool "Unmap kernel when running in userspace (KPTI)" if EXPERT
 	default y
 	help
 	  Speculation attacks against some high-performance processors can
diff --git linux-libre-6.7-gnu/arch/arm64/Makefile linux-libre-6.8-gnu/arch/arm64/Makefile
index 9a2d3723cd0f..a88cdf910687 100644
--- linux-libre-6.7-gnu/arch/arm64/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/Makefile
@@ -195,12 +195,12 @@ vdso_prepare: prepare0
 	include/generated/vdso-offsets.h arch/arm64/kernel/vdso/vdso.so
 ifdef CONFIG_COMPAT_VDSO
 	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 \
-	include/generated/vdso32-offsets.h arch/arm64/kernel/vdso32/vdso.so
+	arch/arm64/kernel/vdso32/vdso.so
 endif
 endif
 
 vdso-install-y				+= arch/arm64/kernel/vdso/vdso.so.dbg
-vdso-install-$(CONFIG_COMPAT_VDSO)	+= arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
+vdso-install-$(CONFIG_COMPAT_VDSO)	+= arch/arm64/kernel/vdso32/vdso32.so.dbg
 
 include $(srctree)/scripts/Makefile.defconf
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/Makefile linux-libre-6.8-gnu/arch/arm64/boot/Makefile
index 1761f5972443..a5a787371117 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/boot/Makefile
@@ -44,7 +44,7 @@ EFI_ZBOOT_BFD_TARGET	:= elf64-littleaarch64
 EFI_ZBOOT_MACH_TYPE	:= ARM64
 EFI_ZBOOT_FORWARD_CFI	:= $(CONFIG_ARM64_BTI_KERNEL)
 
-EFI_ZBOOT_OBJCOPY_FLAGS	= --add-symbol zboot_code_size=0x$(shell \
+EFI_ZBOOT_OBJCOPY_FLAGS	= --add-symbol zboot_code_size=0x$$( \
 				$(NM) vmlinux|grep _kernel_codesize|cut -d' ' -f1)
 
 include $(srctree)/drivers/firmware/efi/libstub/Makefile.zboot
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/allwinner/Makefile linux-libre-6.8-gnu/arch/arm64/boot/dts/allwinner/Makefile
index 3aca6787a167..1f1f8d865d0e 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/allwinner/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/allwinner/Makefile
@@ -42,4 +42,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
new file mode 100644
index 000000000000..21ca1977055d
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "OrangePi Zero 2W";
+	compatible = "xunlong,orangepi-zero2w", "allwinner,sun50i-h618";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* SY8089 DC/DC converter */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		regulator-always-on;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on the FPC connector (or the exansion board) */
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;	/* internally via VCC-IO */
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;	/* internally via VCC-IO */
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>;	/* PC9 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL and DRAM */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&spi0  {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
new file mode 100644
index 000000000000..8ea1fd41aeba
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Transpeed 8K618-T";
+	compatible = "transpeed,8k618-t", "allwinner,sun50i-h618";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* discrete 3.3V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dldo1>;
+	cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>;	/* PI16 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-1v8-pll";
+			};
+
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-io-mmc";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1360000>;
+				regulator-max-microvolt = <1360000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_dldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 439497ab967d..072fe20cfca0 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -59,6 +59,25 @@
 		};
 	};
 
+	firmware {
+		svc {
+			compatible = "intel,stratix10-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+
+			fpga_mgr: fpga-mgr {
+				compatible = "intel,stratix10-soc-fpga-mgr";
+			};
+		};
+	};
+
+	fpga-region {
+		compatible = "fpga-region";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		fpga-mgr = <&fpga_mgr>;
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <0 170 4>,
@@ -125,7 +144,7 @@
 		};
 	};
 
-	soc {
+	soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -133,13 +152,6 @@
 		interrupt-parent = <&intc>;
 		ranges = <0 0 0 0xffffffff>;
 
-		base_fpga_region {
-			#address-cells = <0x2>;
-			#size-cells = <0x2>;
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-
 		clkmgr: clock-controller@ffd10000 {
 			compatible = "intel,stratix10-clkmgr";
 			reg = <0xffd10000 0x1000>;
@@ -510,6 +522,7 @@
 			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
 			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			clock-names = "otg";
 			iommus = <&smmu 7>;
 			status = "disabled";
 		};
@@ -620,18 +633,6 @@
 
 			status = "disabled";
 		};
-
-		firmware {
-			svc {
-				compatible = "intel,stratix10-svc";
-				method = "smc";
-				memory-region = <&service_reserved>;
-
-				fpga_mgr: fpga-mgr {
-					compatible = "intel,stratix10-soc-fpga-mgr";
-				};
-			};
-		};
 	};
 
 	usbphy0: usbphy0 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 468fcc7da066..26173f0b0051 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -51,7 +51,7 @@
 		regulator-max-microvolt = <330000>;
 	};
 
-	soc {
+	soc@0 {
 		eccmgr {
 			sdmmca-ecc@ff8c8c00 {
 				compatible = "altr,socfpga-s10-sdmmc-ecc",
@@ -66,14 +66,14 @@
 };
 
 &pinctrl0 {
-	i2c1_pmx_func: i2c1-pmx-func {
+	i2c1_pmx_func: i2c1-pmx-func-pins {
 		pinctrl-single,pins = <
 			0x78   0x4   /* I2C1_SDA (IO6-B) PIN30SEL) */
 			0x7c   0x4   /* I2C1_SCL (IO7-B) PIN31SEL */
 		>;
 	};
 
-	i2c1_pmx_func_gpio: i2c1-pmx-func-gpio {
+	i2c1_pmx_func_gpio: i2c1-pmx-func-gpio-pins {
 		pinctrl-single,pins = <
 			0x78   0x8   /* I2C1_SDA (IO6-B) PIN30SEL) */
 			0x7c   0x8   /* I2C1_SCL (IO7-B) PIN31SEL */
@@ -187,8 +187,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <1>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
index 532164a6354c..81d0e914a77c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -51,7 +51,7 @@
 		regulator-max-microvolt = <330000>;
 	};
 
-	soc {
+	soc@0 {
 		eccmgr {
 			sdmmca-ecc@ff8c8c00 {
 				compatible = "altr,socfpga-s10-sdmmc-ecc",
@@ -102,7 +102,7 @@
 &nand {
 	status = "okay";
 
-	flash@0 {
+	nand@0 {
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -176,8 +176,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <1>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
index ff413f8e3b07..0d837d3e65a5 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
@@ -80,8 +80,6 @@
 
 &mmc {
 	status = "okay";
-	altr,dw-mshc-ciu-div = <0x3>;
-	altr,dw-mshc-sdr-timing = <0x0 0x3>;
 	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	broken-cd;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amazon/alpine-v2.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index dccbba6e7f98..dbf2dce8d1d6 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -145,7 +145,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <160>;
 			al,msi-num-spis = <160>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amazon/alpine-v3.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
index 39481d7fd7d4..3ea178acdddf 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -355,7 +355,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <336>;
 			al,msi-num-spis = <959>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index 998f5050795c..2ad1f8eef199 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -81,6 +81,12 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			watchdog@2100 {
+				compatible = "amlogic,c3-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			periphs_pinctrl: pinctrl@4000 {
 				compatible = "amlogic,c3-periphs-pinctrl";
 				#address-cells = <2>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
index 0062667c4f65..8a18ce948450 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
@@ -30,8 +30,20 @@
 &uart_B {
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&i2c_AO {
+	/* EEPROM on base board */
+	eeprompd: eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <0x20>;
+		label = "eeprompd";
+		address-width = <0x10>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
index c2d22b00c1cd..c356bd2cc63a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
@@ -25,3 +25,15 @@
 &sd_emmc_b {
 	broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
 };
+
+&i2c_AO {
+	/* EEPROM on base board */
+	eeprompd: eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <0x20>;
+		label = "eeprompd";
+		address-width = <0x10>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index df16eead2c80..c8905663bc75 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -66,7 +66,6 @@
 		VDDA-supply = <&vcc_3v3>;
 		VDDP-supply = <&vcc_3v3>;
 		VDDD-supply = <&vcc_3v3>;
-		status = "okay";
 		sound-name-prefix = "Linein";
 	};
 
@@ -75,14 +74,12 @@
 		compatible = "everest,es7154";
 		VDD-supply = <&vcc_3v3>;
 		PVDD-supply = <&vcc_5v>;
-		status = "okay";
 		sound-name-prefix = "Lineout";
 	};
 
 	spdif_dit: audio-codec-2 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -91,14 +88,12 @@
 		compatible = "dmic-codec";
 		num-channels = <7>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
 	spdif_dir: audio-codec-4 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dir";
-		status = "okay";
 		sound-name-prefix = "DIR";
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index a49aa62e3f9f..7e5ac9db93f8 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -432,6 +432,27 @@
 					};
 				};
 
+				nand_all_pins: nand-all-pins {
+					mux {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "nand_ce0",
+							 "nand_ale",
+							 "nand_cle",
+							 "nand_wen_clk",
+							 "nand_ren_wr";
+						function = "nand";
+						input-enable;
+						bias-pull-up;
+					};
+				};
+
 				emmc_ds_pins: emmc_ds {
 					mux {
 						groups = "emmc_ds";
@@ -1913,6 +1934,8 @@
 				reg = <0x0 0x7800 0x0 0x100>,
 				      <0x0 0x7000 0x0 0x800>;
 				reg-names = "nfc", "emmc";
+				pinctrl-0 = <&nand_all_pins>;
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 0ad0c2b7dfef..4c4550dd4711 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -45,7 +45,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 4969a76460fa..9b55982b6a6b 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -22,7 +22,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
index 995ce10d5c81..08c33ec7e9f1 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -369,7 +369,7 @@
 
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
index 0a6a12808568..4b8db872bbf3 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -487,7 +487,7 @@
 
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
index 8fc2e143cb54..0da386cabe1a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
@@ -22,7 +22,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index ce548b373296..6396f190d703 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -17,7 +17,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 18f7b730289e..e59c3c92b1e7 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -26,7 +26,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index e238f1f10124..f28452b9f00f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -18,7 +18,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index 292c718ee19c..591455c50e88 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -18,7 +18,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index e8303089bff6..74df32534231 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -21,7 +21,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index e1b74b174915..376760d86766 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -17,7 +17,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 7d525bdb0e06..ad2dd4ad0a31 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -28,7 +28,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 50d49aec41bd..d05dde8da5c5 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -37,7 +37,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
index c1f322c73982..983caddc409c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -15,7 +15,7 @@
 	#size-cells = <2>;
 
 	aliases {
-		serial0 = &uart_B;
+		serial0 = &uart_b;
 	};
 
 	memory@0 {
@@ -23,9 +23,20 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 52 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x3400000>;
+			no-map;
+		};
+	};
 };
 
-&uart_B {
+&uart_b {
 	status = "okay";
 };
 
@@ -34,3 +45,48 @@
 	pinctrl-0 = <&remote_pins>;
 	pinctrl-names = "default";
 };
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
+};
+
+&spicc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spicc0_pins_x>;
+	cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index e0cfc54ebccb..ce90b35686a2 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -6,6 +6,10 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-s4-gpio.h>
+#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
+#include <dt-bindings/power/meson-s4-power.h>
 
 / {
 	cpus {
@@ -92,6 +96,44 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			clkc_periphs: clock-controller@0 {
+				compatible = "amlogic,s4-peripherals-clkc";
+				reg = <0x0 0x0 0x0 0x49c>;
+				clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+					<&clkc_pll CLKID_FCLK_DIV2P5>,
+					<&clkc_pll CLKID_FCLK_DIV3>,
+					<&clkc_pll CLKID_FCLK_DIV4>,
+					<&clkc_pll CLKID_FCLK_DIV5>,
+					<&clkc_pll CLKID_FCLK_DIV7>,
+					<&clkc_pll CLKID_HIFI_PLL>,
+					<&clkc_pll CLKID_GP0_PLL>,
+					<&clkc_pll CLKID_MPLL0>,
+					<&clkc_pll CLKID_MPLL1>,
+					<&clkc_pll CLKID_MPLL2>,
+					<&clkc_pll CLKID_MPLL3>,
+					<&clkc_pll CLKID_HDMI_PLL>,
+					<&xtal>;
+				clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3",
+						"fclk_div4", "fclk_div5", "fclk_div7",
+						"hifi_pll", "gp0_pll", "mpll0", "mpll1",
+						"mpll2", "mpll3", "hdmi_pll", "xtal";
+				#clock-cells = <1>;
+			};
+
+			clkc_pll: clock-controller@8000 {
+				compatible = "amlogic,s4-pll-clkc";
+				reg = <0x0 0x8000 0x0 0x1e8>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				#clock-cells = <1>;
+			};
+
+			watchdog@2100 {
+				compatible = "amlogic,s4-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			periphs_pinctrl: pinctrl@4000 {
 				compatible = "amlogic,meson-s4-periphs-pinctrl";
 				#address-cells = <2>;
@@ -114,6 +156,187 @@
 						bias-disable;
 					};
 				};
+
+				i2c0_pins1: i2c0-pins1 {
+					mux {
+						groups = "i2c0_sda",
+						       "i2c0_scl";
+						function = "i2c0";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins1: i2c1-pins1 {
+					mux {
+						groups = "i2c1_sda_c",
+						       "i2c1_scl_c";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins2: i2c1-pins2 {
+					mux {
+						groups = "i2c1_sda_d",
+						       "i2c1_scl_d";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins3: i2c1-pins3 {
+					mux {
+						groups = "i2c1_sda_h",
+						       "i2c1_scl_h";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins4: i2c1-pins4 {
+					mux {
+						groups = "i2c1_sda_x",
+						       "i2c1_scl_x";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins1: i2c2-pins1 {
+					mux {
+						groups = "i2c2_sda_d",
+						       "i2c2_scl_d";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins2: i2c2-pins2 {
+					mux {
+						groups = "i2c2_sda_h8",
+						       "i2c2_scl_h9";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins3: i2c2-pins3 {
+					mux {
+						groups = "i2c2_sda_h0",
+						       "i2c2_scl_h1";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c3_pins1: i2c3-pins1 {
+					mux {
+						groups = "i2c3_sda_x",
+						       "i2c3_scl_x";
+						function = "i2c3";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c3_pins2: i2c3-pins2 {
+					mux {
+						groups = "i2c3_sda_z",
+						       "i2c3_scl_z";
+						function = "i2c3";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins1: i2c4-pins1 {
+					mux {
+						groups = "i2c4_sda_c",
+						       "i2c4_scl_c";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins2: i2c4-pins2 {
+					mux {
+						groups = "i2c4_sda_d",
+						       "i2c4_scl_d";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins3: i2c4-pins3 {
+					mux {
+						groups = "i2c4_sda_z",
+						       "i2c4_scl_z";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				nand_pins: nand-pins {
+					mux {
+						groups = "emmc_nand_d0",
+						       "emmc_nand_d1",
+						       "emmc_nand_d2",
+						       "emmc_nand_d3",
+						       "emmc_nand_d4",
+						       "emmc_nand_d5",
+						       "emmc_nand_d6",
+						       "emmc_nand_d7",
+						       "nand_ce0",
+						       "nand_ale",
+						       "nand_cle",
+						       "nand_wen_clk",
+						       "nand_ren_wr";
+						function = "nand";
+						input-enable;
+					};
+				};
+
+				spicc0_pins_x: spicc0-pins_x {
+					mux {
+						groups = "spi_a_mosi_x",
+						       "spi_a_miso_x",
+						       "spi_a_clk_x";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins_h: spicc0-pins-h {
+					mux {
+						groups = "spi_a_mosi_h",
+						       "spi_a_miso_h",
+						       "spi_a_clk_h";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins_z: spicc0-pins-z {
+					mux {
+						groups = "spi_a_mosi_z",
+						       "spi_a_miso_z",
+						       "spi_a_clk_z";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
 			};
 
 			gpio_intc: interrupt-controller@4080 {
@@ -126,14 +349,120 @@
 					<10 11 12 13 14 15 16 17 18 19 20 21>;
 			};
 
-			uart_B: serial@7a000 {
+			eth_phy: mdio-multiplexer@28000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x28000 0x0 0xa4>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_ETHPHY>,
+					 <&xtal>,
+					 <&clkc_pll CLKID_MPLL_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+
+				ext_mdio: mdio@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet-phy@8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+
+			spicc0: spi@50000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x50000 0x0 0x44>;
+				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SPICC0>,
+					 <&clkc_periphs CLKID_SPICC0_EN>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@66000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x66000 0x0 0x20>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_A>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@68000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x68000 0x0 0x20>;
+				interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_B>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@6a000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6a000 0x0 0x20>;
+				interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@6c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6c000 0x0 0x20>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_D>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@6e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6e000 0x0 0x20>;
+				interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_E>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			nand: nand-controller@8c800 {
+				compatible = "amlogic,meson-axg-nfc";
+				reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>;
+				reg-names = "nfc", "emmc";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SD_EMMC_C>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "device";
+				status = "disabled";
+			};
+
+			uart_b: serial@7a000 {
 				compatible = "amlogic,meson-s4-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x7a000 0x0 0x18>;
 				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
 			};
 
 			reset: reset-controller@2000 {
@@ -154,5 +483,30 @@
 				reg = <0x0 0x440788 0x0 0x0c>;
 			};
 		};
+
+		ethmac: ethernet@fdc00000 {
+			compatible = "amlogic,meson-axg-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xfdc00000 0x0 0x10000>,
+			      <0x0 0xfe024000 0x0 0x8>;
+
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			power-domains = <&pwrc PWRC_S4_ETH_ID>;
+			clocks = <&clkc_periphs CLKID_ETH>,
+				 <&clkc_pll CLKID_FCLK_DIV2>,
+				 <&clkc_pll CLKID_MPLL2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+		};
 	};
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 095579c55f18..109932068dbe 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -32,7 +32,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
index 8b4d280b1e7e..b897f5542c0a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -747,7 +747,7 @@
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 0>;
@@ -760,7 +760,7 @@
 			};
 		};
 
-		soc {
+		soc-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 3>;
@@ -773,28 +773,28 @@
 			};
 		};
 
-		big_cluster_thermal_zone: big-cluster {
+		big_cluster_thermal_zone: big-cluster-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 21>;
 			status = "disabled";
 		};
 
-		little_cluster_thermal_zone: little-cluster {
+		little_cluster_thermal_zone: little-cluster-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 22>;
 			status = "disabled";
 		};
 
-		gpu0_thermal_zone: gpu0 {
+		gpu0_thermal_zone: gpu0-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 23>;
 			status = "disabled";
 		};
 
-		gpu1_thermal_zone: gpu1 {
+		gpu1_thermal_zone: gpu1-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 24>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/arm/juno-scmi.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/arm/juno-scmi.dtsi
index ec85cd2c733c..31929e2377d8 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/arm/juno-scmi.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/arm/juno-scmi.dtsi
@@ -76,27 +76,27 @@
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			thermal-sensors = <&scmi_sensors0 0>;
 		};
 
-		soc {
+		soc-thermal {
 			thermal-sensors = <&scmi_sensors0 3>;
 		};
 
-		big-cluster {
+		big-cluster-thermal {
 			thermal-sensors = <&scmi_sensors0 21>;
 		};
 
-		little-cluster {
+		little-cluster-thermal {
 			thermal-sensors = <&scmi_sensors0 22>;
 		};
 
-		gpu0 {
+		gpu0-thermal {
 			thermal-sensors = <&scmi_sensors0 23>;
 		};
 
-		gpu1 {
+		gpu1-thermal {
 			thermal-sensors = <&scmi_sensors0 24>;
 		};
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 9dcd25ec2c04..896d1f33b5b6 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -586,6 +586,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index f049687d6b96..d8516ec0dae7 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -450,6 +450,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinmux 0 0 16>,
 					<&pinmux 16 71 2>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/Makefile linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/Makefile
index 6e4ba69268e5..d7f2191c2cdb 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/Makefile
@@ -1,8 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
+subdir-y += google
+
 dtb-$(CONFIG_ARCH_EXYNOS) += \
 	exynos5433-tm2.dtb		\
 	exynos5433-tm2e.dtb		\
 	exynos7-espresso.dtb		\
 	exynos7885-jackpotlte.dtb	\
 	exynos850-e850-96.dtb		\
-	exynosautov9-sadk.dtb
+	exynosautov9-sadk.dtb		\
+	exynosautov920-sadk.dtb
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynos5433.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 91ae0462a706..7fbbec04bff0 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -361,7 +361,8 @@
 		ranges = <0x0 0x0 0x0 0x18000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
+			compatible = "samsung,exynos5433-chipid",
+				     "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
@@ -850,7 +851,8 @@
 			reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos7-wakeup-eint";
+				compatible = "samsung,exynos5433-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1546,7 +1548,7 @@
 		};
 
 		adc: adc@14d10000 {
-			compatible = "samsung,exynos7-adc";
+			compatible = "samsung,exynos5433-adc", "samsung,exynos7-adc";
 			reg = <0x14d10000 0x100>;
 			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc";
@@ -1556,7 +1558,7 @@
 		};
 
 		i2s1: i2s@14d60000 {
-			compatible = "samsung,exynos7-i2s";
+			compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s";
 			reg = <0x14d60000 0x100>;
 			dmas = <&pdma0 31>, <&pdma0 30>;
 			dma-names = "tx", "rx";
@@ -1571,7 +1573,7 @@
 		};
 
 		pwm: pwm@14dd0000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "samsung,exynos5433-pwm", "samsung,exynos4210-pwm";
 			reg = <0x14dd0000 0x100>;
 			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
@@ -1586,7 +1588,8 @@
 		};
 
 		hsi2c_0: i2c@14e40000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e40000 0x1000>;
 			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1599,7 +1602,8 @@
 		};
 
 		hsi2c_1: i2c@14e50000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e50000 0x1000>;
 			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1612,7 +1616,8 @@
 		};
 
 		hsi2c_2: i2c@14e60000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e60000 0x1000>;
 			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1625,7 +1630,8 @@
 		};
 
 		hsi2c_3: i2c@14e70000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e70000 0x1000>;
 			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1638,7 +1644,8 @@
 		};
 
 		hsi2c_4: i2c@14ec0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ec0000 0x1000>;
 			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1651,7 +1658,8 @@
 		};
 
 		hsi2c_5: i2c@14ed0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ed0000 0x1000>;
 			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1664,7 +1672,8 @@
 		};
 
 		hsi2c_6: i2c@14ee0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ee0000 0x1000>;
 			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1677,7 +1686,8 @@
 		};
 
 		hsi2c_7: i2c@14ef0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ef0000 0x1000>;
 			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1690,7 +1700,8 @@
 		};
 
 		hsi2c_8: i2c@14d90000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14d90000 0x1000>;
 			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1703,7 +1714,8 @@
 		};
 
 		hsi2c_9: i2c@14da0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14da0000 0x1000>;
 			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1716,7 +1728,8 @@
 		};
 
 		hsi2c_10: i2c@14de0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14de0000 0x1000>;
 			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1729,7 +1742,8 @@
 		};
 
 		hsi2c_11: i2c@14df0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14df0000 0x1000>;
 			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1820,7 +1834,8 @@
 		};
 
 		mshc_0: mmc@15540000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1833,7 +1848,8 @@
 		};
 
 		mshc_1: mmc@15550000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1846,7 +1862,8 @@
 		};
 
 		mshc_2: mmc@15560000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1897,7 +1914,8 @@
 			};
 
 			i2s0: i2s@11440000 {
-				compatible = "samsung,exynos7-i2s";
+				compatible = "samsung,exynos5433-i2s",
+					     "samsung,exynos7-i2s";
 				reg = <0x11440000 0x100>;
 				dmas = <&adma 0>, <&adma 2>;
 				dma-names = "tx", "rx";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynos7.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 6ed80ddf3369..9cb6bd61262e 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -128,7 +128,8 @@
 		ranges = <0 0 0 0x18000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
+			compatible = "samsung,exynos7-chipid",
+				     "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
@@ -279,7 +280,7 @@
 		};
 
 		serial_0: serial@13630000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x13630000 0x100>;
 			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric0 PCLK_UART0>,
@@ -289,7 +290,7 @@
 		};
 
 		serial_1: serial@14c20000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c20000 0x100>;
 			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART1>,
@@ -299,7 +300,7 @@
 		};
 
 		serial_2: serial@14c30000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c30000 0x100>;
 			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART2>,
@@ -309,7 +310,7 @@
 		};
 
 		serial_3: serial@14c40000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c40000 0x100>;
 			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART3>,
@@ -539,7 +540,7 @@
 		};
 
 		rtc: rtc@10590000 {
-			compatible = "samsung,s3c6410-rtc";
+			compatible = "samsung,exynos7-rtc", "samsung,s3c6410-rtc";
 			reg = <0x10590000 0x100>;
 			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +560,8 @@
 		};
 
 		gpu: gpu@14ac0000 {
-			compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+			compatible = "samsung,exynos7-mali",
+				     "samsung,exynos5433-mali", "arm,mali-t760";
 			reg = <0x14ac0000 0x5000>;
 			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
@@ -619,7 +621,7 @@
 		};
 
 		pwm: pwm@136c0000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "samsung,exynos7-pwm", "samsung,exynos4210-pwm";
 			reg = <0x136c0000 0x100>;
 			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynos7885.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynos7885.dtsi
index d69fc2392bd0..008228fb319a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynos7885.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynos7885.dtsi
@@ -172,7 +172,8 @@
 		ranges = <0x0 0x0 0x0 0x20000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos850-chipid";
+			compatible = "samsung,exynos7885-chipid",
+				     "samsung,exynos850-chipid";
 			reg = <0x10000000 0x24>;
 		};
 
@@ -264,7 +265,8 @@
 			reg = <0x11cb0000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos7-wakeup-eint";
+				compatible = "samsung,exynos7885-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 			};
@@ -289,12 +291,14 @@
 		};
 
 		pmu_system_controller: system-controller@11c80000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "samsung,exynos7885-pmu",
+				     "samsung,exynos7-pmu", "syscon";
 			reg = <0x11c80000 0x10000>;
 		};
 
 		mmc_0: mmc@13500000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos7885-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			reg = <0x13500000 0x2000>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -307,7 +311,8 @@
 		};
 
 		serial_0: serial@13800000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13800000 0x100>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -320,7 +325,8 @@
 		};
 
 		serial_1: serial@13810000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13810000 0x100>;
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -333,7 +339,8 @@
 		};
 
 		serial_2: serial@13820000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13820000 0x100>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -346,7 +353,8 @@
 		};
 
 		i2c_0: i2c@13830000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13830000 0x100>;
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -359,7 +367,8 @@
 		};
 
 		i2c_1: i2c@13840000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13840000 0x100>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -372,7 +381,8 @@
 		};
 
 		i2c_2: i2c@13850000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13850000 0x100>;
 			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -385,7 +395,8 @@
 		};
 
 		i2c_3: i2c@13860000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
 			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -398,7 +409,8 @@
 		};
 
 		i2c_4: i2c@13870000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -411,7 +423,8 @@
 		};
 
 		i2c_5: i2c@13880000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
 			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -424,7 +437,8 @@
 		};
 
 		i2c_6: i2c@13890000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
 			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -437,7 +451,8 @@
 		};
 
 		i2c_7: i2c@11cd0000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x11cd0000 0x100>;
 			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynos850.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynos850.dtsi
index 53104e65b9c6..da3f4a791e68 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -359,7 +359,8 @@
 			reg = <0x11850000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos850-wakeup-eint";
+				compatible = "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -368,7 +369,8 @@
 			reg = <0x11c30000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos850-wakeup-eint";
+				compatible = "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -396,7 +398,7 @@
 		};
 
 		rtc: rtc@11a30000 {
-			compatible = "samsung,s3c6410-rtc";
+			compatible = "samsung,exynos850-rtc", "samsung,s3c6410-rtc";
 			reg = <0x11a30000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -406,7 +408,8 @@
 		};
 
 		mmc_0: mmc@12100000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos850-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			reg = <0x12100000 0x2000>;
 			interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -419,7 +422,7 @@
 		};
 
 		i2c_0: i2c@13830000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13830000 0x100>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -432,7 +435,7 @@
 		};
 
 		i2c_1: i2c@13840000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13840000 0x100>;
 			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -445,7 +448,7 @@
 		};
 
 		i2c_2: i2c@13850000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13850000 0x100>;
 			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -458,7 +461,7 @@
 		};
 
 		i2c_3: i2c@13860000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
 			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -471,7 +474,7 @@
 		};
 
 		i2c_4: i2c@13870000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
 			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -485,7 +488,7 @@
 
 		/* I2C_5 (also called CAM_PMIC_I2C in TRM) */
 		i2c_5: i2c@13880000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
 			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -499,7 +502,7 @@
 
 		/* I2C_6 (also called MOTOR_I2C in TRM) */
 		i2c_6: i2c@13890000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
 			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -640,7 +643,8 @@
 			status = "disabled";
 
 			hsi2c_0: i2c@138a0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138a0000 0xc0>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -668,7 +672,8 @@
 			status = "disabled";
 
 			hsi2c_1: i2c@138b0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138b0000 0xc0>;
 				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -696,7 +701,8 @@
 			status = "disabled";
 
 			hsi2c_2: i2c@138c0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138c0000 0xc0>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -738,7 +744,8 @@
 			status = "disabled";
 
 			hsi2c_3: i2c@11d00000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x11d00000 0xc0>;
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -778,7 +785,8 @@
 			status = "disabled";
 
 			hsi2c_4: i2c@11d20000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x11d20000 0xc0>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
index bc1815f6ada2..de2c1de51a76 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "exynosautov9.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Samsung ExynosAuto v9 SADK board";
@@ -32,6 +33,31 @@
 		      <0xa 0x00000000 0x2 0x00000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_wakeup &key_volup &key_voldown>;
+
+		key-wakeup {
+			label = "Wakeup";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpg2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpg1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	ufs_0_fixed_vcc_reg: regulator-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "ufs-vcc";
@@ -49,6 +75,31 @@
 	};
 };
 
+&pinctrl_alive {
+	key_wakeup: key-wakeup-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_peric1 {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpg2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpg1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm_tout3>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynosautov9.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index b228cd7e351e..c871a2f49fda 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -166,7 +166,8 @@
 		ranges = <0x0 0x0 0x0 0x20000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos850-chipid";
+			compatible = "samsung,exynosautov9-chipid",
+				     "samsung,exynos850-chipid";
 			reg = <0x10000000 0x24>;
 		};
 
@@ -309,7 +310,9 @@
 			reg = <0x10450000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynosautov9-wakeup-eint";
+				compatible = "samsung,exynosautov9-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -349,7 +352,8 @@
 		};
 
 		pmu_system_controller: system-controller@10460000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "samsung,exynosautov9-pmu",
+				     "samsung,exynos7-pmu", "syscon";
 			reg = <0x10460000 0x10000>;
 
 			reboot: syscon-reboot {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
new file mode 100644
index 000000000000..663e8265cbf5
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
@@ -0,0 +1,1266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb6: gpb6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi0 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph8: gph8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph5: gph5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph6: gph6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2ufs {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_refclk_out_1: ufs-refclk-out-1-pins {
+		samsung,pins = "gph2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_rst_n_1: ufs-rst-n-1-pins {
+		samsung,pins = "gph2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg5: gpg5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* PWM PERIC0 */
+	pwm_tout0: pwm-tout0-pins {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout1: pwm-tout1-pins {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout2: pwm-tout2-pins {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout3: pwm-tout3-pins {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI00 */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart0_bus_dual: uart0-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI01 */
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus_dual: uart1-bus-dual-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI02 */
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI03 */
+	uart3_bus: uart3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI04 */
+	uart4_bus: uart4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI05 */
+	uart5_bus: uart5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI06 */
+	uart6_bus: uart6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI07 */
+	uart7_bus: uart7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI08 */
+	uart8_bus: uart8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00  */
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00_I2C */
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01 */
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01_I2C */
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02 */
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02_I2C */
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03 */
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03_I2C */
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04 */
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04_I2C */
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05 */
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05_I2C */
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06 */
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06_I2C */
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07 */
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07_I2C */
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08 */
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08_I2C */
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI00 */
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI01 */
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI02 */
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI03 */
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI04 */
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI05 */
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI06 */
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI07 */
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI08 */
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC0 */
+	i3c0_bus: i3c0-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c1_bus: i3c1-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c2_bus: i3c2-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c3_bus: i3c3-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* UART PERIC1 USI09 */
+	uart9_bus: uart9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI10 */
+	uart10_bus: uart10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI11 */
+	uart11_bus: uart11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI12 */
+	uart12_bus: uart12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI13 */
+	uart13_bus: uart13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI14 */
+	uart14_bus: uart14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI15 */
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI16 */
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_dual: uart16-bus-dual-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI17 */
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_dual: uart17-bus-dual-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09 */
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09_I2C */
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10 */
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10_I2C */
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11 */
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11_I2C */
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12 */
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12_I2C */
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13 */
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13_I2C */
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14 */
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14_I2C */
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15 */
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15_I2C */
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16 */
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16_I2C */
+	hsi2c33_bus: hsi2c33-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17 */
+	hsi2c34_bus: hsi2c34-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17_I2C */
+	hsi2c35_bus: hsi2c35-bus-pins {
+		samsung,pins = "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI09 */
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI10 */
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI11 */
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI12 */
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI13 */
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI14 */
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI15 */
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs_func: spi15-cs-func-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI16 */
+	spi16_bus: spi16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs: spi16-cs-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs_func: spi16-cs-func-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI17 */
+	spi17_bus: spi17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs: spi17-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs_func: spi17-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC1 */
+	i3c4_bus: i3c4-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c5_bus: i3c5-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c6_bus: i3c6-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c7_bus: i3c7-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
new file mode 100644
index 000000000000..a397f068ed53
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SADK board device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "exynosautov920.dtsi"
+#include "exynos-pinctrl.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Samsung ExynosAutov920 SADK board";
+	compatible = "samsung,exynosautov920-sadk", "samsung,exynosautov920";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_wakeup &key_back>;
+
+		key-wakeup {
+			label = "KEY_WAKEUP";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		key-back {
+			label = "KEY_BACK";
+			linux,code = <KEY_BACK>;
+			gpios = <&gpp6 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x70000000>,
+		      <0x8 0x80000000 0x1 0xfba00000>,
+		      <0xa 0x00000000 0x2 0x00000000>;
+	};
+};
+
+&pinctrl_alive {
+	key_wakeup: key-wakeup-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pinctrl_peric1 {
+	key_back: key-back-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_tout0>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&usi_0 {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&xtcxo {
+	clock-frequency = <38400000>;
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/exynosautov920.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
new file mode 100644
index 000000000000..c1c8566d74f5
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "samsung,exynosautov920";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_hsi0;
+		pinctrl3 = &pinctrl_hsi1;
+		pinctrl4 = &pinctrl_hsi2;
+		pinctrl5 = &pinctrl_hsi2ufs;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	xtcxo: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	/*
+	 * FIXME: Keep the stub clock for serial driver, until proper clock
+	 * driver is implemented.
+	 */
+	clock_usi: clock-usi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "usi";
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+		};
+
+		cpu8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+		};
+
+		cpu9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynosautov920-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>,
+			      <0x10460000 0x140000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscon_peric0: syscon@10820000 {
+			compatible = "samsung,exynosautov920-peric0-sysreg",
+				     "syscon";
+			reg = <0x10820000 0x2000>;
+		};
+
+		pinctrl_peric0: pinctrl@10830000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10830000 0x10000>;
+			interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usi_0: usi@108800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108800c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&clock_usi>, <&clock_usi>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_0: serial@10880000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10880000 0xc0>;
+				interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_bus>;
+				clocks = <&clock_usi>, <&clock_usi>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		pwm: pwm@109b0000 {
+			compatible = "samsung,exynosautov920-pwm",
+				     "samsung,exynos4210-pwm";
+			reg = <0x109b0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&xtcxo>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		syscon_peric1: syscon@10c20000 {
+			compatible = "samsung,exynosautov920-peric1-sysreg",
+				     "syscon";
+			reg = <0x10c20000 0x2000>;
+		};
+
+		pinctrl_peric1: pinctrl@10c30000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10c30000 0x10000>;
+			interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_alive: pinctrl@11850000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x11850000 0x10000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynosautov920-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@11860000 {
+			compatible = "samsung,exynosautov920-pmu",
+				     "samsung,exynos7-pmu","syscon";
+			reg = <0x11860000 0x10000>;
+		};
+
+		pinctrl_hsi0: pinctrl@16040000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16040000 0x10000>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi1: pinctrl@16450000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16450000 0x10000>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2: pinctrl@16c10000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16c10000 0x10000>;
+			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2ufs: pinctrl@16d20000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16d20000 0x10000>;
+			interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aud: pinctrl@1a460000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x1a460000 0x10000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "exynosautov920-pinctrl.dtsi"
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/google/Makefile linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/google/Makefile
new file mode 100644
index 000000000000..0a6d5e1fe4ee
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/google/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_EXYNOS) += \
+	gs101-oriole.dtb \
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
new file mode 100644
index 000000000000..4a71f752200d
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Oriole Device Tree
+ *
+ * Copyright 2021-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "gs101-pinctrl.h"
+#include "gs101.dtsi"
+
+/ {
+	model = "Oriole";
+	compatible = "google,gs101-oriole", "google,gs101";
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		/* Bootloader expects bootargs specified otherwise it crashes */
+		bootargs = "";
+		stdout-path = &serial_0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
+
+		button-vol-down {
+			label = "KEY_VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-vol-up {
+			label = "KEY_VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "KEY_POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&ext_24_5m {
+	clock-frequency = <24576000>;
+};
+
+&ext_200m {
+	clock-frequency = <200000000>;
+};
+
+&pinctrl_far_alive {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa7-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_gpio_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&serial_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_bus>;
+	status = "okay";
+};
+
+&usi_uart {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&watchdog_cl0 {
+	timeout-sec = <30>;
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
new file mode 100644
index 000000000000..e6a9776d4d62
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
@@ -0,0 +1,1249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include "gs101-pinctrl.h"
+
+&pinctrl_gpio_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa5: gpa5-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa9: gpa9-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa10: gpa10-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpa2-3", "gpa2-4";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_far_alive {
+	gpa6: gpa6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa7: gpa7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa8: gpa8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa11: gpa11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+};
+
+&pinctrl_gsacore {
+	gps0: gps0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps1: gps1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps2: gps2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_gsactrl {
+	gps3: gps3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie0_clkreq: pcie0-clkreq-pins{
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie0_perst: pcie0-perst-pins {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gph4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gph4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gph4-3", "gph4-4", "gph4-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph3-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	pcie1_clkreq: pcie1-clkreq-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie1_perst: pcie1-perst-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp13: gpp13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp14: gpp14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp15: gpp15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp16: gpp16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp17: gpp17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp18: gpp18-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp19: gpp19-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* USI_PERIC0_UART_DBG */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	disp_te_pri_on: disp-te-pri-on-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_pri_off: disp-te-pri-off-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	disp_te_sec_on: disp-te-sec-on-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_sec_off: disp-te-sec-off-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	sensor_mclk1_out: sensor-mclk1-out-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk1_fn: sensor-mclk1-fn-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_out: sensor-mclk2-out-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_fn: sensor-mclk2-fn-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_out: sensor-mclk3-out-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_fn: sensor-mclk3-fn-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_out: sensor-mclk4-out-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_fn: sensor-mclk4-fn-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_out: sensor-mclk5-out-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_fn: sensor-mclk5-fn-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_out: sensor-mclk6-out-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_fn: sensor-mclk6-fn-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_out: sensor-mclk7-out-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_fn: sensor-mclk7-fn-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_out: sensor-mclk8-out-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_fn: sensor-mclk8-fn-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart14_bus_single: uart14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1",
+			       "gpp18-2", "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>;
+	};
+
+	uart8_bus_single: uart8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2",
+			       "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart7_bus_single: uart7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1",
+			       "gpp14-2", "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart6_bus_single: uart6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1",
+			       "gpp12-2", "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart5_bus_single: uart5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1",
+			       "gpp10-2", "gpp10-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart4_bus_single: uart4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1",
+			       "gpp8-2", "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart3_bus_single: uart3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1",
+			       "gpp6-2", "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart2_bus_single: uart2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1",
+			       "gpp4-2", "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart1_bus_single: uart1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1",
+			       "gpp2-2", "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp20: gpp20-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp21: gpp21-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp22: gpp22-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp23: gpp23-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp24: gpp24-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp25: gpp25-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp26: gpp26-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp27: gpp27-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins  {
+		samsung,pins = "gpp25-0", "gpp25-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart13_bus_single: uart13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1",
+			       "gpp25-2", "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart12_bus_single: uart12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5",
+			       "gpp23-6", "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs2: spi14-cs2-pins {
+		samsung,pins = "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart11_bus_single: uart11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1",
+			       "gpp23-2", "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart10_bus_single: uart10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1",
+			       "gpp21-2", "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart9_bus_single: uart9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5",
+			       "gpp20-6", "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart0_bus_single: uart0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1",
+			       "gpp20-2", "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
new file mode 100644
index 000000000000..b7d276b1e25a
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Pinctrl binding constants for GS101
+ *
+ * Copyright 2020-2023 Google LLC
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+
+#define GS101_PIN_PULL_NONE		0
+#define GS101_PIN_PULL_DOWN		1
+#define GS101_PIN_PULL_UP		3
+
+/* Pin function in power down mode */
+#define GS101_PIN_PDN_OUT0		0
+#define GS101_PIN_PDN_OUT1		1
+#define GS101_PIN_PDN_INPUT		2
+#define GS101_PIN_PDN_PREV		3
+
+/* GS101 drive strengths */
+#define GS101_PIN_DRV_2_5_MA		0
+#define GS101_PIN_DRV_5_MA		1
+#define GS101_PIN_DRV_7_5_MA		2
+#define GS101_PIN_DRV_10_MA		3
+
+#define GS101_PIN_FUNC_INPUT		0
+#define GS101_PIN_FUNC_OUTPUT		1
+#define GS101_PIN_FUNC_2		2
+#define GS101_PIN_FUNC_3		3
+#define GS101_PIN_FUNC_EINT		0xf
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__ */
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi
new file mode 100644
index 000000000000..d838e3a7af6e
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include <dt-bindings/clock/google,gs101.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "google,gs101";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_gpio_alive;
+		pinctrl1 = &pinctrl_far_alive;
+		pinctrl2 = &pinctrl_gsacore;
+		pinctrl3 = &pinctrl_gsactrl;
+		pinctrl4 = &pinctrl_peric0;
+		pinctrl5 = &pinctrl_peric1;
+		pinctrl6 = &pinctrl_hsi1;
+		pinctrl7 = &pinctrl_hsi2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0000>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0100>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0200>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0300>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0400>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0500>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0600>;
+			enable-method = "psci";
+			cpu-idle-states =  <&HERA_CPU_SLEEP>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0700>;
+			enable-method = "psci";
+			cpu-idle-states =  <&HERA_CPU_SLEEP>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			ANANKE_CPU_SLEEP: cpu-ananke-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <70>;
+				exit-latency-us = <160>;
+				min-residency-us = <2000>;
+			};
+
+			ENYO_CPU_SLEEP: cpu-enyo-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <150>;
+				exit-latency-us = <190>;
+				min-residency-us = <2500>;
+			};
+
+			HERA_CPU_SLEEP: cpu-hera-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <235>;
+				exit-latency-us = <220>;
+				min-residency-us = <3500>;
+			};
+		};
+	};
+
+	/* TODO replace with CCF clock */
+	dummy_clk: clock-3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12345>;
+		clock-output-names = "pclk";
+	};
+
+	/* ect node is required to be present by bootloader */
+	ect {
+	};
+
+	ext_24_5m: clock-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	ext_200m: clock-2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ext-200m";
+	};
+
+	pmu-0 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-1 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	pmu-2 {
+		compatible = "arm,cortex-x1-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
+	};
+
+	pmu-3 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
+		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+		       <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		gsa_reserved_protected: gsa@90200000 {
+			reg = <0x0 0x90200000 0x400000>;
+			no-map;
+		};
+
+		tpu_fw_reserved: tpu-fw@93000000 {
+			reg = <0x0 0x93000000 0x1000000>;
+			no-map;
+		};
+
+		aoc_reserve: aoc@94000000 {
+			reg = <0x0 0x94000000 0x03000000>;
+			no-map;
+		};
+
+		abl_reserved: abl@f8800000 {
+			reg = <0x0 0xf8800000 0x02000000>;
+			no-map;
+		};
+
+		dss_log_reserved: dss-log-reserved@fd3f0000 {
+			reg = <0x0 0xfd3f0000 0x0000e000>;
+			no-map;
+		};
+
+		debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 {
+			reg = <0x0 0xfd3fe000 0x00001000>;
+			no-map;
+		};
+
+		bldr_log_reserved: bldr-log-reserved@fd800000 {
+			reg = <0x0 0xfd800000 0x00100000>;
+			no-map;
+		};
+
+		bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 {
+			reg = <0x0 0xfd900000 0x00002000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		cmu_misc: clock-controller@10010000 {
+			compatible = "google,gs101-cmu-misc";
+			reg = <0x10010000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&cmu_top CLK_DOUT_CMU_MISC_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_MISC_SSS>;
+			clock-names = "bus", "sss";
+		};
+
+		watchdog_cl0: watchdog@10060000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_PCLK>,
+				 <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+			status = "disabled";
+		};
+
+		watchdog_cl1: watchdog@10070000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10070000 0x100>;
+			interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_PCLK>,
+				 <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>, /* GICD */
+			      <0x10440000 0x100000>;/* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		sysreg_peric0: syscon@10820000 {
+			compatible = "google,gs101-peric0-sysreg", "syscon";
+			reg = <0x10820000 0x10000>;
+		};
+
+		pinctrl_peric0: pinctrl@10840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10840000 0x00001000>;
+			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		usi_uart: usi@10a000c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10a000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&dummy_clk>, <&dummy_clk>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			status = "disabled";
+
+			serial_0: serial@10a00000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10a00000 0xc0>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 634
+					      IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&dummy_clk 0>, <&dummy_clk 0>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		sysreg_peric1: syscon@10c20000 {
+			compatible = "google,gs101-peric1-sysreg", "syscon";
+			reg = <0x10c20000 0x10000>;
+		};
+
+		pinctrl_peric1: pinctrl@10c40000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10c40000 0x00001000>;
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		pinctrl_hsi1: pinctrl@11840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x11840000 0x00001000>;
+			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		pinctrl_hsi2: pinctrl@14440000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x14440000 0x00001000>;
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		cmu_apm: clock-controller@17400000 {
+			compatible = "google,gs101-cmu-apm";
+			reg = <0x17400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+
+		sysreg_apm: syscon@174204e0 {
+			compatible = "google,gs101-apm-sysreg", "syscon";
+			reg = <0x174204e0 0x1000>;
+		};
+
+		pmu_system_controller: system-controller@17460000 {
+			compatible = "google,gs101-pmu", "syscon";
+			reg = <0x17460000 0x10000>;
+		};
+
+		pinctrl_gpio_alive: pinctrl@174d0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174d0000 0x00001000>;
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_far_alive: pinctrl@174e0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174e0000 0x00001000>;
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_gsactrl: pinctrl@17940000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17940000 0x00001000>;
+		};
+
+		pinctrl_gsacore: pinctrl@17a80000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17a80000 0x00001000>;
+		};
+
+		cmu_top: clock-controller@1e080000 {
+			compatible = "google,gs101-cmu-top";
+			reg = <0x1e080000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts =
+		   <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
+	};
+};
+
+#include "gs101-pinctrl.dtsi"
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/Makefile linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/Makefile
index 300049037eb0..2cb0212b63c6 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/Makefile
@@ -20,23 +20,41 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb
+DTC_FLAGS_fsl-ls1088a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
+DTC_FLAGS_fsl-ls1088a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
+DTC_FLAGS_fsl-ls1088a-ten64 := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
+DTC_FLAGS_fsl-ls1088a-tqmls1088a-mbls10xxa := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-tqmls1088a-mbls10xxa.dtb
+DTC_FLAGS_fsl-ls2080a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
+DTC_FLAGS_fsl-ls2080a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+DTC_FLAGS_fsl-ls2081a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
+DTC_FLAGS_fsl-ls2080a-simu := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+DTC_FLAGS_fsl-ls2088a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+DTC_FLAGS_fsl-ls2088a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+DTC_FLAGS_fsl-lx2160a-bluebox3 := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3.dtb
+DTC_FLAGS_fsl-lx2160a-bluebox3-rev-a := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3-rev-a.dtb
+DTC_FLAGS_fsl-lx2160a-clearfog-cx := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb
+DTC_FLAGS_fsl-lx2160a-honeycomb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
+DTC_FLAGS_fsl-lx2160a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
+DTC_FLAGS_fsl-lx2160a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
+DTC_FLAGS_fsl-lx2162a-clearfog := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-clearfog.dtb
+DTC_FLAGS_fsl-lx2162a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
 
 fsl-ls1028a-qds-13bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-13bb.dtbo
@@ -53,6 +71,33 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
 
+DTC_FLAGS_fsl-lx2160a-tqmlx2160a-mblx2160a := -Wno-interrupt_map
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
+
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
@@ -84,9 +129,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7905-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb
 
 imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtbo
@@ -95,9 +142,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-dimonoff-gateway-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-rve-gateway.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
@@ -115,6 +164,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
@@ -123,13 +175,17 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
 
 imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo
+imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
@@ -164,6 +220,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
 
 imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index a863022529ac..1e3fe3897b52 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -307,46 +307,46 @@
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <0 33 0x4>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
-			fsl,tmu-calibration = <0x00000000 0x00000025
-					       0x00000001 0x0000002c
-					       0x00000002 0x00000032
-					       0x00000003 0x00000039
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000046
-					       0x00000006 0x0000004c
-					       0x00000007 0x00000053
-					       0x00000008 0x00000059
-					       0x00000009 0x0000005f
-					       0x0000000a 0x00000066
-					       0x0000000b 0x0000006c
-
-					       0x00010000 0x00000026
-					       0x00010001 0x0000002d
-					       0x00010002 0x00000035
-					       0x00010003 0x0000003d
-					       0x00010004 0x00000045
-					       0x00010005 0x0000004d
-					       0x00010006 0x00000055
-					       0x00010007 0x0000005d
-					       0x00010008 0x00000065
-					       0x00010009 0x0000006d
-
-					       0x00020000 0x00000026
-					       0x00020001 0x00000030
-					       0x00020002 0x0000003a
-					       0x00020003 0x00000044
-					       0x00020004 0x0000004e
-					       0x00020005 0x00000059
-					       0x00020006 0x00000063
-
-					       0x00030000 0x00000014
-					       0x00030001 0x00000021
-					       0x00030002 0x0000002e
-					       0x00030003 0x0000003a
-					       0x00030004 0x00000047
-					       0x00030005 0x00000053
-					       0x00030006 0x00000060>;
-			big-endian;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000025>,
+					<0x00000001 0x0000002c>,
+					<0x00000002 0x00000032>,
+					<0x00000003 0x00000039>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000046>,
+					<0x00000006 0x0000004c>,
+					<0x00000007 0x00000053>,
+					<0x00000008 0x00000059>,
+					<0x00000009 0x0000005f>,
+					<0x0000000a 0x00000066>,
+					<0x0000000b 0x0000006c>,
+
+					<0x00010000 0x00000026>,
+					<0x00010001 0x0000002d>,
+					<0x00010002 0x00000035>,
+					<0x00010003 0x0000003d>,
+					<0x00010004 0x00000045>,
+					<0x00010005 0x0000004d>,
+					<0x00010006 0x00000055>,
+					<0x00010007 0x0000005d>,
+					<0x00010008 0x00000065>,
+					<0x00010009 0x0000006d>,
+
+					<0x00020000 0x00000026>,
+					<0x00020001 0x00000030>,
+					<0x00020002 0x0000003a>,
+					<0x00020003 0x00000044>,
+					<0x00020004 0x0000004e>,
+					<0x00020005 0x00000059>,
+					<0x00020006 0x00000063>,
+
+					<0x00030000 0x00000014>,
+					<0x00030001 0x00000021>,
+					<0x00030002 0x0000002e>,
+					<0x00030003 0x0000003a>,
+					<0x00030004 0x00000047>,
+					<0x00030005 0x00000053>,
+					<0x00030006 0x00000060>;
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index eefe3577d94e..ae534c23b970 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1026,49 +1026,50 @@
 			reg = <0x0 0x1f80000 0x0 0x10000>;
 			interrupts = <0 23 0x4>;
 			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
-			fsl,tmu-calibration = <0x00000000 0x00000024
-					       0x00000001 0x0000002b
-					       0x00000002 0x00000031
-					       0x00000003 0x00000038
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000045
-					       0x00000006 0x0000004c
-					       0x00000007 0x00000053
-					       0x00000008 0x00000059
-					       0x00000009 0x00000060
-					       0x0000000a 0x00000066
-					       0x0000000b 0x0000006d
-
-					       0x00010000 0x0000001c
-					       0x00010001 0x00000024
-					       0x00010002 0x0000002c
-					       0x00010003 0x00000035
-					       0x00010004 0x0000003d
-					       0x00010005 0x00000045
-					       0x00010006 0x0000004d
-					       0x00010007 0x00000055
-					       0x00010008 0x0000005e
-					       0x00010009 0x00000066
-					       0x0001000a 0x0000006e
-
-					       0x00020000 0x00000018
-					       0x00020001 0x00000022
-					       0x00020002 0x0000002d
-					       0x00020003 0x00000038
-					       0x00020004 0x00000043
-					       0x00020005 0x0000004d
-					       0x00020006 0x00000058
-					       0x00020007 0x00000063
-					       0x00020008 0x0000006e
-
-					       0x00030000 0x00000010
-					       0x00030001 0x0000001c
-					       0x00030002 0x00000029
-					       0x00030003 0x00000036
-					       0x00030004 0x00000042
-					       0x00030005 0x0000004f
-					       0x00030006 0x0000005b
-					       0x00030007 0x00000068>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000024>,
+					<0x00000001 0x0000002b>,
+					<0x00000002 0x00000031>,
+					<0x00000003 0x00000038>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000045>,
+					<0x00000006 0x0000004c>,
+					<0x00000007 0x00000053>,
+					<0x00000008 0x00000059>,
+					<0x00000009 0x00000060>,
+					<0x0000000a 0x00000066>,
+					<0x0000000b 0x0000006d>,
+
+					<0x00010000 0x0000001c>,
+					<0x00010001 0x00000024>,
+					<0x00010002 0x0000002c>,
+					<0x00010003 0x00000035>,
+					<0x00010004 0x0000003d>,
+					<0x00010005 0x00000045>,
+					<0x00010006 0x0000004d>,
+					<0x00010007 0x00000055>,
+					<0x00010008 0x0000005e>,
+					<0x00010009 0x00000066>,
+					<0x0001000a 0x0000006e>,
+
+					<0x00020000 0x00000018>,
+					<0x00020001 0x00000022>,
+					<0x00020002 0x0000002d>,
+					<0x00020003 0x00000038>,
+					<0x00020004 0x00000043>,
+					<0x00020005 0x0000004d>,
+					<0x00020006 0x00000058>,
+					<0x00020007 0x00000063>,
+					<0x00020008 0x0000006e>,
+
+					<0x00030000 0x00000010>,
+					<0x00030001 0x0000001c>,
+					<0x00030002 0x00000029>,
+					<0x00030003 0x00000036>,
+					<0x00030004 0x00000042>,
+					<0x00030005 0x0000004f>,
+					<0x00030006 0x0000005b>,
+					<0x00030007 0x00000068>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 229bb4bebe42..d333b773bc45 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -447,46 +447,47 @@
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <0 33 0x4>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
-			fsl,tmu-calibration = <0x00000000 0x00000023
-					       0x00000001 0x0000002a
-					       0x00000002 0x00000031
-					       0x00000003 0x00000037
-					       0x00000004 0x0000003e
-					       0x00000005 0x00000044
-					       0x00000006 0x0000004b
-					       0x00000007 0x00000051
-					       0x00000008 0x00000058
-					       0x00000009 0x0000005e
-					       0x0000000a 0x00000065
-					       0x0000000b 0x0000006b
-
-					       0x00010000 0x00000023
-					       0x00010001 0x0000002b
-					       0x00010002 0x00000033
-					       0x00010003 0x0000003b
-					       0x00010004 0x00000043
-					       0x00010005 0x0000004b
-					       0x00010006 0x00000054
-					       0x00010007 0x0000005c
-					       0x00010008 0x00000064
-					       0x00010009 0x0000006c
-
-					       0x00020000 0x00000021
-					       0x00020001 0x0000002c
-					       0x00020002 0x00000036
-					       0x00020003 0x00000040
-					       0x00020004 0x0000004b
-					       0x00020005 0x00000055
-					       0x00020006 0x0000005f
-
-					       0x00030000 0x00000013
-					       0x00030001 0x0000001d
-					       0x00030002 0x00000028
-					       0x00030003 0x00000032
-					       0x00030004 0x0000003d
-					       0x00030005 0x00000047
-					       0x00030006 0x00000052
-					       0x00030007 0x0000005c>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000023>,
+					<0x00000001 0x0000002a>,
+					<0x00000002 0x00000031>,
+					<0x00000003 0x00000037>,
+					<0x00000004 0x0000003e>,
+					<0x00000005 0x00000044>,
+					<0x00000006 0x0000004b>,
+					<0x00000007 0x00000051>,
+					<0x00000008 0x00000058>,
+					<0x00000009 0x0000005e>,
+					<0x0000000a 0x00000065>,
+					<0x0000000b 0x0000006b>,
+
+					<0x00010000 0x00000023>,
+					<0x00010001 0x0000002b>,
+					<0x00010002 0x00000033>,
+					<0x00010003 0x0000003b>,
+					<0x00010004 0x00000043>,
+					<0x00010005 0x0000004b>,
+					<0x00010006 0x00000054>,
+					<0x00010007 0x0000005c>,
+					<0x00010008 0x00000064>,
+					<0x00010009 0x0000006c>,
+
+					<0x00020000 0x00000021>,
+					<0x00020001 0x0000002c>,
+					<0x00020002 0x00000036>,
+					<0x00020003 0x00000040>,
+					<0x00020004 0x0000004b>,
+					<0x00020005 0x00000055>,
+					<0x00020006 0x0000005f>,
+
+					<0x00030000 0x00000013>,
+					<0x00030001 0x0000001d>,
+					<0x00030002 0x00000028>,
+					<0x00030003 0x00000032>,
+					<0x00030004 0x0000003d>,
+					<0x00030005 0x00000047>,
+					<0x00030006 0x00000052>,
+					<0x00030007 0x0000005c>;
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 50f68ca5a9af..1515cec23147 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -445,46 +445,46 @@
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000023
-				0x00000001 0x00000029
-				0x00000002 0x0000002f
-				0x00000003 0x00000036
-				0x00000004 0x0000003c
-				0x00000005 0x00000042
-				0x00000006 0x00000049
-				0x00000007 0x0000004f
-				0x00000008 0x00000055
-				0x00000009 0x0000005c
-				0x0000000a 0x00000062
-				0x0000000b 0x00000068
+				<0x00000000 0x00000023>,
+				<0x00000001 0x00000029>,
+				<0x00000002 0x0000002f>,
+				<0x00000003 0x00000036>,
+				<0x00000004 0x0000003c>,
+				<0x00000005 0x00000042>,
+				<0x00000006 0x00000049>,
+				<0x00000007 0x0000004f>,
+				<0x00000008 0x00000055>,
+				<0x00000009 0x0000005c>,
+				<0x0000000a 0x00000062>,
+				<0x0000000b 0x00000068>,
 				/* Calibration data group 2 */
-				0x00010000 0x00000022
-				0x00010001 0x0000002a
-				0x00010002 0x00000032
-				0x00010003 0x0000003a
-				0x00010004 0x00000042
-				0x00010005 0x0000004a
-				0x00010006 0x00000052
-				0x00010007 0x0000005a
-				0x00010008 0x00000062
-				0x00010009 0x0000006a
+				<0x00010000 0x00000022>,
+				<0x00010001 0x0000002a>,
+				<0x00010002 0x00000032>,
+				<0x00010003 0x0000003a>,
+				<0x00010004 0x00000042>,
+				<0x00010005 0x0000004a>,
+				<0x00010006 0x00000052>,
+				<0x00010007 0x0000005a>,
+				<0x00010008 0x00000062>,
+				<0x00010009 0x0000006a>,
 				/* Calibration data group 3 */
-				0x00020000 0x00000021
-				0x00020001 0x0000002b
-				0x00020002 0x00000035
-				0x00020003 0x0000003e
-				0x00020004 0x00000048
-				0x00020005 0x00000052
-				0x00020006 0x0000005c
+				<0x00020000 0x00000021>,
+				<0x00020001 0x0000002b>,
+				<0x00020002 0x00000035>,
+				<0x00020003 0x0000003e>,
+				<0x00020004 0x00000048>,
+				<0x00020005 0x00000052>,
+				<0x00020006 0x0000005c>,
 				/* Calibration data group 4 */
-				0x00030000 0x00000011
-				0x00030001 0x0000001a
-				0x00030002 0x00000024
-				0x00030003 0x0000002e
-				0x00030004 0x00000038
-				0x00030005 0x00000042
-				0x00030006 0x0000004c
-				0x00030007 0x00000056>;
+				<0x00030000 0x00000011>,
+				<0x00030001 0x0000001a>,
+				<0x00030002 0x00000024>,
+				<0x00030003 0x0000002e>,
+				<0x00030004 0x00000038>,
+				<0x00030005 0x00000042>,
+				<0x00030006 0x0000004c>,
+				<0x00030007 0x00000056>;
 			big-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 8f6090a9aef2..8616d5e0c388 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -284,46 +284,46 @@
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000023
-				0x00000001 0x0000002a
-				0x00000002 0x00000030
-				0x00000003 0x00000037
-				0x00000004 0x0000003d
-				0x00000005 0x00000044
-				0x00000006 0x0000004a
-				0x00000007 0x00000051
-				0x00000008 0x00000057
-				0x00000009 0x0000005e
-				0x0000000a 0x00000064
-				0x0000000b 0x0000006b
+				<0x00000000 0x00000023>,
+				<0x00000001 0x0000002a>,
+				<0x00000002 0x00000030>,
+				<0x00000003 0x00000037>,
+				<0x00000004 0x0000003d>,
+				<0x00000005 0x00000044>,
+				<0x00000006 0x0000004a>,
+				<0x00000007 0x00000051>,
+				<0x00000008 0x00000057>,
+				<0x00000009 0x0000005e>,
+				<0x0000000a 0x00000064>,
+				<0x0000000b 0x0000006b>,
 				/* Calibration data group 2 */
-				0x00010000 0x00000022
-				0x00010001 0x0000002a
-				0x00010002 0x00000032
-				0x00010003 0x0000003a
-				0x00010004 0x00000042
-				0x00010005 0x0000004a
-				0x00010006 0x00000052
-				0x00010007 0x0000005a
-				0x00010008 0x00000062
-				0x00010009 0x0000006a
+				<0x00010000 0x00000022>,
+				<0x00010001 0x0000002a>,
+				<0x00010002 0x00000032>,
+				<0x00010003 0x0000003a>,
+				<0x00010004 0x00000042>,
+				<0x00010005 0x0000004a>,
+				<0x00010006 0x00000052>,
+				<0x00010007 0x0000005a>,
+				<0x00010008 0x00000062>,
+				<0x00010009 0x0000006a>,
 				/* Calibration data group 3 */
-				0x00020000 0x00000021
-				0x00020001 0x0000002b
-				0x00020002 0x00000035
-				0x00020003 0x00000040
-				0x00020004 0x0000004a
-				0x00020005 0x00000054
-				0x00020006 0x0000005e
+				<0x00020000 0x00000021>,
+				<0x00020001 0x0000002b>,
+				<0x00020002 0x00000035>,
+				<0x00020003 0x00000040>,
+				<0x00020004 0x0000004a>,
+				<0x00020005 0x00000054>,
+				<0x00020006 0x0000005e>,
 				/* Calibration data group 4 */
-				0x00030000 0x00000010
-				0x00030001 0x0000001c
-				0x00030002 0x00000027
-				0x00030003 0x00000032
-				0x00030004 0x0000003e
-				0x00030005 0x00000049
-				0x00030006 0x00000054
-				0x00030007 0x00000060>;
+				<0x00030000 0x00000010>,
+				<0x00030001 0x0000001c>,
+				<0x00030002 0x00000027>,
+				<0x00030003 0x00000032>,
+				<0x00030004 0x0000003e>,
+				<0x00030005 0x00000049>,
+				<0x00030006 0x00000054>,
+				<0x00030007 0x00000060>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 717288bbdb8b..0b7292835906 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -321,42 +321,43 @@
 			reg = <0x0 0x1f80000 0x0 0x10000>;
 			interrupts = <0 23 0x4>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
-			fsl,tmu-calibration = <0x00000000 0x00000026
-					       0x00000001 0x0000002d
-					       0x00000002 0x00000032
-					       0x00000003 0x00000039
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000046
-					       0x00000006 0x0000004d
-					       0x00000007 0x00000054
-					       0x00000008 0x0000005a
-					       0x00000009 0x00000061
-					       0x0000000a 0x0000006a
-					       0x0000000b 0x00000071
-
-					       0x00010000 0x00000025
-					       0x00010001 0x0000002c
-					       0x00010002 0x00000035
-					       0x00010003 0x0000003d
-					       0x00010004 0x00000045
-					       0x00010005 0x0000004e
-					       0x00010006 0x00000057
-					       0x00010007 0x00000061
-					       0x00010008 0x0000006b
-					       0x00010009 0x00000076
-
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000049
-					       0x00020004 0x00000056
-					       0x00020005 0x00000061
-					       0x00020006 0x0000006d
-
-					       0x00030000 0x00000021
-					       0x00030001 0x0000002a
-					       0x00030002 0x0000003c
-					       0x00030003 0x0000004e>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000026>,
+					<0x00000001 0x0000002d>,
+					<0x00000002 0x00000032>,
+					<0x00000003 0x00000039>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000046>,
+					<0x00000006 0x0000004d>,
+					<0x00000007 0x00000054>,
+					<0x00000008 0x0000005a>,
+					<0x00000009 0x00000061>,
+					<0x0000000a 0x0000006a>,
+					<0x0000000b 0x00000071>,
+
+					<0x00010000 0x00000025>,
+					<0x00010001 0x0000002c>,
+					<0x00010002 0x00000035>,
+					<0x00010003 0x0000003d>,
+					<0x00010004 0x00000045>,
+					<0x00010005 0x0000004e>,
+					<0x00010006 0x00000057>,
+					<0x00010007 0x00000061>,
+					<0x00010008 0x0000006b>,
+					<0x00010009 0x00000076>,
+
+					<0x00020000 0x00000029>,
+					<0x00020001 0x00000033>,
+					<0x00020002 0x0000003d>,
+					<0x00020003 0x00000049>,
+					<0x00020004 0x00000056>,
+					<0x00020005 0x00000061>,
+					<0x00020006 0x0000006d>,
+
+					<0x00030000 0x00000021>,
+					<0x00030001 0x0000002a>,
+					<0x00030002 0x0000003c>,
+					<0x00030003 0x0000004e>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
new file mode 100644
index 000000000000..da0f58e26b9a
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "fsl-lx2160a-tqmlx2160a.dtsi"
+
+/ {
+	model = "TQ Systems GmbH MBLX2160A Starterkit";
+	compatible = "tq,lx2160a-tqmlx2160a-mblx2160a", "tq,lx2160a-tqmlx2160a",
+		     "fsl,lx2160a";
+
+	aliases {
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user1 {
+			label = "button:user1";
+			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F1>;
+		};
+
+		button-user2 {
+			label = "button:user2";
+			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user1 {
+			gpios = <&gpioex1 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <1>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sfp_xfi1: sfp-xfi1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&xfi1_i2c>;
+		mod-def0-gpios = <&gpioex2 2 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioex2 3 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioex2 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioex2 1 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	sfp_xfi2: sfp-xfi2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&xfi2_i2c>;
+		mod-def0-gpios = <&gpioex2 6 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioex2 7 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioex2 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioex2 5 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&dp83867_2_3>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&dp83867_2_4>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	dp83867_1_1: ethernet-phy@1 {
+		reg = <1>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_2: ethernet-phy@2 {
+		reg = <2>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_3: ethernet-phy@3 {
+		reg = <3>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_4: ethernet-phy@4 {
+		reg = <4>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_5: ethernet-phy@5 {
+		reg = <5>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_6: ethernet-phy@6 {
+		reg = <6>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	dp83867_2_1: ethernet-phy@1 {
+		reg = <1>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_2: ethernet-phy@2 {
+		reg = <2>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_3: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_4: ethernet-phy@4 {
+		reg = <4>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	no-mmc;
+	no-sdio;
+	wp-gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	gpioex3: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_vcc3v3>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpioex0: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+
+			gpioex1: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+
+			gpioex2: gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_vcc3v3>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xfi1_i2c: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xfi2_i2c: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&pcs_mdio17 {
+	status = "okay";
+};
+
+&pcs_mdio18 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
new file mode 100644
index 000000000000..8284a564e20d
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac9 {
+	phy-handle = <&dp83867_2_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac10 {
+	phy-handle = <&dp83867_2_2>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio9 {
+	status = "okay";
+};
+
+&pcs_mdio10 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
new file mode 100644
index 000000000000..636b17a383ed
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac1 {
+	managed = "in-band-status";
+};
+
+&pcs_mdio1 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
new file mode 100644
index 000000000000..6d0c808cd840
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+	phy-handle = <&dp83867_1_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac13 {
+	phy-handle = <&dp83867_1_5>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	phy-handle = <&dp83867_1_6>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac16 {
+	phy-handle = <&dp83867_1_4>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
new file mode 100644
index 000000000000..db88a86ff69c
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+	phy-handle = <&dp83867_1_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac13 {
+	sfp = <&sfp_xfi1>;
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	sfp = <&sfp_xfi2>;
+	managed = "in-band-status";
+};
+
+&dpmac16 {
+	phy-handle = <&dp83867_1_4>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
+
+&sfp_xfi1 {
+	status = "okay";
+};
+
+&sfp_xfi2 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
new file mode 100644
index 000000000000..f6dfa76aa0e7
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac13 {
+	sfp = <&sfp_xfi1>;
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	sfp = <&sfp_xfi2>;
+	managed = "in-band-status";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sfp_xfi1 {
+	status = "okay";
+};
+
+&sfp_xfi2 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi
new file mode 100644
index 000000000000..89a4765737b4
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc1 {
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <10000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+
+	flash1: flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <10000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&i2c0 {
+	scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	sensor0: temperature-sensor@1f {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x1f>;
+	};
+
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+
+	eeprom2: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index f176ca2e244e..6640b49670ae 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -732,9 +732,9 @@
 			fsl,tmu-range = <0x800000e6 0x8001017d>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000035
+				<0x00000000 0x00000035>,
 				/* Calibration data group 2 */
-				0x00000001 0x00000154>;
+				<0x00000001 0x00000154>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
index 72136c436a70..f6654fdcb147 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
@@ -68,6 +68,7 @@
 		gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_can2_supply: regulator-can2-supply {
@@ -77,6 +78,7 @@
 		gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_usb_host_vbus: regulator-usb-host-vbus {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index 9d75ce467569..f057c6b21b30 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -24,7 +24,6 @@ audio_subsys: bus@59000000 {
 		compatible = "fsl,imx8qm-edma";
 		reg = <0x591f0000 0x190000>;
 		#dma-cells = <3>;
-		shared-interrupt;
 		dma-channels = <24>;
 		dma-channel-mask = <0x5c0c00>;
 		interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 0 */
@@ -127,7 +126,6 @@ audio_subsys: bus@59000000 {
 		compatible = "fsl,imx8qm-edma";
 		reg = <0x599f0000 0xc0000>;
 		#dma-cells = <3>;
-		shared-interrupt;
 		dma-channels = <11>;
 		dma-channel-mask = <0xc0>;
 		interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 1 */
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
index a414df645351..6d13e4fafb76 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -13,6 +13,13 @@
 		clock-frequency = <250000000>;
 		clock-output-names = "conn_enet0_root_clk";
 	};
+
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
 };
 
 &conn_subsys {
@@ -22,7 +29,7 @@
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "eth_wake_irq", "macirq";
+		interrupt-names = "macirq", "eth_wake_irq";
 		clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
 			 <&eqos_lpcg IMX_LPCG_CLK_6>,
 			 <&eqos_lpcg IMX_LPCG_CLK_0>,
@@ -53,13 +60,6 @@
 		rx-burst-size-dword = <0x10>;
 		power-domains = <&pd IMX_SC_R_USB_1>;
 		status = "disabled";
-
-		clk_dummy: clock-dummy {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "clk_dummy";
-		};
 	};
 
 	usbmisc2: usbmisc@5b0e0200 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
index 550f513708d8..3569abb5bb9b 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
@@ -4,6 +4,6 @@
  */
 
 &ddr_pmu0 {
-	compatible = "fsl,imx8-ddr-pmu";
+	compatible = "fsl,imx8dxl-ddr-pmu", "fsl,imx8-ddr-pmu";
 	interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index f264102bdb27..62ed64663f49 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2020 Compass Electronics Group, LLC
  */
 
+#include "imx8mm-overdrive.dtsi"
+
 / {
 	aliases {
 		rtc0 = &rtc;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
index d897a8527335..44c2cba41a1f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
@@ -104,7 +104,7 @@
 		compatible = "nxp,pca8574";
 		reg = <0x3a>;
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index a882c86ec313..b53104ed8919 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -367,12 +367,6 @@
 		interrupts = <11 8>;
 		status = "okay";
 
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
 		typec1_con: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -384,6 +378,12 @@
 				     PDO_VAR(5000, 20000, 3000)>;
 			op-sink-microwatt = <15000000>;
 			self-powered;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
 		};
 	};
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 0e8f0d7161ad..12fb79d20b29 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -220,7 +220,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c3@0 {
+		i2c@0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi
new file mode 100644
index 000000000000..b31436b5e9b7
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu_2d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&gpu_3d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&vpu_blk_ctrl {
+	assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+			  <&clk IMX8MM_CLK_VPU_G2>,
+			  <&clk IMX8MM_CLK_VPU_H1>,
+			  <&clk IMX8MM_VPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
+				 <&clk IMX8MM_VPU_PLL_OUT>,
+				 <&clk IMX8MM_SYS_PLL3_OUT>;
+	assigned-clock-rates = <750000000>,
+			       <700000000>,
+			       <750000000>,
+			       <700000000>;
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
index 968f475b9a96..27a902569e2a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
@@ -120,7 +120,7 @@
 	};
 
 	tpm: tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
 		pinctrl-names = "default";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
index 156d793a0c97..ea6e8b85169f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";
 	compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index 3a0a10e835a2..752caa38eb03 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -84,8 +84,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio1 {
@@ -152,23 +159,30 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		pcie@1,0 {
+		pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
-			pcie@2,3 {
+			pcie@3,0 {
 				reg = <0x1800 0 0 0 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
 
-				eth1: pcie@5,0 {
+				eth1: ethernet@0,0 {
 					reg = <0x0000 0 0 0 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
 
 					local-mac-address = [00 00 00 00 00 00];
 				};
@@ -312,6 +326,7 @@
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xd6
 		>;
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index d79fe9f62b95..2aa6c1090fc7 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -109,7 +109,7 @@
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};
@@ -179,23 +179,30 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		pcie@1,0 {
+		pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
-			pcie@2,4 {
+			pcie@4,0 {
 				reg = <0x2000 0 0 0 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
 
-				eth1: pcie@6,0 {
+				eth1: ethernet@0,0 {
 					reg = <0x0000 0 0 0 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
 
 					local-mac-address = [00 00 00 00 00 00];
 				};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 06a394a41d7c..c11260c26d0b 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -635,13 +635,16 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		eth1: pcie@1,0 {
+		eth1: ethernet@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
 			local-mac-address = [00 00 00 00 00 00];
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi
new file mode 100644
index 000000000000..4a0799d63446
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MM SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0	0x106>, /* SODIMM 52 */
+			<MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x106>, /* SODIMM 54 */
+			<MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6	0x106>, /* SODIMM 56 */
+			<MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x106>; /* SODIMM 58 */
+	};
+
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2	0x146>; /* SODIMM 64 */
+	};
+
+	pinctrl_tpm_irq: tpmirqgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14	0x141>; /* SODIMM 66 */
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000000..1b1999f3a80e
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Mallow";
+	compatible = "toradex,verdin-imx8mm-nonwifi-mallow",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts
new file mode 100644
index 000000000000..2916145f31bb
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Mallow";
+	compatible = "toradex,verdin-imx8mm-wifi-mallow",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 7decea20727b..4a44a055a3fe 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -636,6 +636,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mm-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -647,7 +649,6 @@
 						<&clk IMX8MM_CLK_AUDIO_AHB>,
 						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
 						<&clk IMX8MM_SYS_PLL3>,
-						<&clk IMX8MM_VIDEO_PLL1>,
 						<&clk IMX8MM_AUDIO_PLL1>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
 							 <&clk IMX8MM_ARM_PLL_OUT>,
@@ -657,7 +658,6 @@
 							<400000000>,
 							<400000000>,
 							<750000000>,
-							<594000000>,
 							<393216000>;
 			};
 
@@ -1133,7 +1133,7 @@
 				assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
 							 <&clk IMX8MM_SYS_PLL2_1000M>,
 							 <&clk IMX8MM_SYS_PLL1_800M>;
-				assigned-clock-rates = <594000000>, <500000000>, <200000000>;
+				assigned-clock-rates = <24000000>, <500000000>, <200000000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
 				status = "disabled";
@@ -1151,12 +1151,8 @@
 				clocks = <&clk IMX8MM_CLK_DSI_CORE>,
 					 <&clk IMX8MM_CLK_DSI_PHY_REF>;
 				clock-names = "bus_clk", "sclk_mipi";
-				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
-						  <&clk IMX8MM_CLK_DSI_PHY_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
-							 <&clk IMX8MM_CLK_24M>;
-				assigned-clock-rates = <266000000>, <24000000>;
-				samsung,pll-clock-frequency = <24000000>;
+				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
 				status = "disabled";
@@ -1408,7 +1404,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
@@ -1423,7 +1419,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index 90073b16536f..2a64115eebf1 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2020 Compass Electronics Group, LLC
  */
 
+#include "imx8mn-overdrive.dtsi"
+
 / {
 	aliases {
 		rtc0 = &rtc;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
index 22a754d438f1..bbb07c650da9 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "imx8mn.dtsi"
+#include "imx8mn-bsh-smm-s2-display.dtsi"
 
 / {
 	chosen {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
new file mode 100644
index 000000000000..7675583a6b67
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 BSH
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 700000 0>;	/* 700000 ns = 1337Hz */
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <50>;
+		status = "okay";
+	};
+
+	reg_3v3_dvdd: regulator-3v3-O3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dvdd>;
+		regulator-name = "3v3-dvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_v3v3_avdd: regulator-3v3-O2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_avdd>;
+		regulator-name = "3v3-avdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bl>;
+	status = "okay";
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
+	assigned-clock-rates = <594000000>;
+	status = "okay";
+};
+
+&pgc_dispmix {
+	assigned-clocks = <&clk IMX8MN_CLK_DISP_AXI>, <&clk IMX8MN_CLK_DISP_APB>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <500000000>, <200000000>;
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <12000000>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "sharp,ls068b3sx02", "syna,r63353";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		reg = <0>;
+
+		backlight = <&backlight>;
+		dvdd-supply = <&reg_3v3_dvdd>;
+		avdd-supply = <&reg_v3v3_avdd>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_avdd: avddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x16	/* VDD 3V3_VO2 */
+		>;
+	};
+
+	/* This is for both PWM and voltage regulators for display */
+	pinctrl_bl: blgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT	0x16
+		>;
+	};
+
+	pinctrl_dvdd: dvddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16	/* VDD 3V3_VO3 */
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29	0x16	/* panel reset */
+		>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts
new file mode 100644
index 000000000000..6f9b82958b96
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som-symphony.dts"
+
+/ {
+	model = "DimOnOff Gateway EVK board";
+	compatible = "dimonoff,gateway-evk", "variscite,var-som-mx8mn",
+		     "fsl,imx8mn";
+
+	/*
+	 * U30 FPF2193 regulator.
+	 * Source = BASE_PER_3V3 = SOM_3V3 (COM pin 49).
+	 */
+	reg_disp_3v3: regulator-disp-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "Display 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-enter {
+			label = "enter";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			wakeup-source;
+		};
+	};
+
+	/* Bourns PEC12R rotary encoder, 24 steps. */
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rotary>;
+		gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, /* A */
+			<&gpio5 13 GPIO_ACTIVE_LOW>; /* B */
+		linux,axis = <0>; /* REL_X */
+		rotary-encoder,encoding = "gray";
+		rotary-encoder,relative-axis;
+	};
+};
+
+/* Disable Asynchronous Sample Rate Converter (audio) */
+&easrc {
+	status = "disabled";
+};
+
+&ecspi1 {
+	/* Resistive touch controller */
+	/delete-node/ touchscreen@0;
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c2 {
+	adc@48 {
+		compatible = "ti,ads7924";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adc>;
+		vref-supply = <&reg_disp_3v3>;
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			label = "Pot0";
+		};
+		channel@1 {
+			reg = <1>;
+			label = "Pot1";
+		};
+		channel@2 {
+			reg = <2>;
+			label = "Pot2";
+		};
+		channel@3 {
+			reg = <3>;
+			label = "Pot3";
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		reset-source; /* For watchdog. */
+	};
+
+	rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reset-source; /* For watchdog. */
+		interrupt-parent = <&gpio5>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* J17.6 on EVK */
+	};
+};
+
+&i2c3 {
+	touchscreen@38 {
+		status = "disabled";
+	};
+
+	codec@1a {
+		status = "disabled";
+	};
+
+	/* DS1337 RTC module */
+	rtc@68 {
+		status = "disabled";
+	};
+};
+
+&sai5 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0xc6
+		>;
+	};
+
+	pinctrl_rotary: rotarygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x00000156
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x00000156
+		>;
+	};
+
+	pinctrl_adc: adcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x00000156
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10	0x00000156
+			MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x00000156
+		>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 3f6a19839c9e..a0e13d3324ed 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -221,12 +221,6 @@
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
 		typec1_con: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -238,6 +232,12 @@
 				     PDO_VAR(5000, 20000, 3000)>;
 			op-sink-microwatt = <15000000>;
 			self-powered;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
 		};
 	};
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi
new file mode 100644
index 000000000000..5d03fb893e90
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu {
+	assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>,
+			  <&clk IMX8MN_CLK_GPU_SHADER>,
+			  <&clk IMX8MN_CLK_GPU_AXI>,
+			  <&clk IMX8MN_CLK_GPU_AHB>,
+			  <&clk IMX8MN_GPU_PLL>;
+	assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+				  <&clk IMX8MN_GPU_PLL_OUT>,
+				  <&clk IMX8MN_SYS_PLL1_800M>,
+				  <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <600000000>,
+			       <600000000>,
+			       <800000000>,
+			       <400000000>,
+			       <1200000000>;
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts
new file mode 100644
index 000000000000..1b633bd1ebb6
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som.dtsi"
+
+/ {
+	model = "RVE gateway";
+	compatible = "rve,rve-gateway", "variscite,var-som-mx8mn", "fsl,imx8mn";
+
+	crystal_duart_24m: crystal-duart-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-enter {
+			label = "enter";
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+		};
+
+		key-exit {
+			label = "exit";
+			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ESC>;
+		};
+	};
+
+	lcd {
+		compatible = "hit,hd44780";
+		display-height-chars = <2>;
+		display-width-chars = <20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+		data-gpios = <&gpio5  1 GPIO_ACTIVE_HIGH>,
+			     <&gpio1  6 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 14 GPIO_ACTIVE_HIGH>,
+			     <&gpio4 28 GPIO_ACTIVE_HIGH>,
+			     <&gpio5 24 GPIO_ACTIVE_HIGH>,
+			     <&gpio5  2 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 12 GPIO_ACTIVE_HIGH>,
+			     <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Bourns PEC12R rotary encoder, 24 steps. */
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rotary>;
+		gpios = <&gpio1  5 GPIO_ACTIVE_LOW>, /* A */
+			<&gpio3 21 GPIO_ACTIVE_LOW>; /* B */
+		linux,axis = <0>; /* REL_X */
+		rotary-encoder,encoding = "gray";
+		rotary-encoder,relative-axis;
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+
+	duart1: serial@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+		clocks = <&crystal_duart_24m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "RADIO0", "RADIO1", "RADIO2", "RADIO3",
+				  "RADIO4", "RADIO_RESET", "TP12", "TP11";
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-active-low;
+	};
+
+	/delete-node/ touchscreen@0;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	status = "okay";
+
+	duart2: serial@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+		clocks = <&crystal_duart_24m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_USER", "LED_R_USER", "LED_G_USER",
+				  "GPIO_EXT3", "GPIO_EXT2", "GPIO_EXT1",
+				  "GPIO_EXT0", "TP13";
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-active-low;
+	};
+};
+
+/* Configure PWM pins in GPIO mode: */
+&gpio5 {
+	gpio-line-names = "", "", "", "PWM3", "PWM2", "PWM1";
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	/* Carrier board EEPROM */
+	eeprom_cb: eeprom@56 {
+		compatible = "atmel,24c04";
+		reg = <0x56>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3p3v>;
+	};
+
+	lm75: sensor@48 {
+		compatible = "st,stlm75";
+		reg = <0x48>;
+		vs-supply = <&reg_3p3v>;
+	};
+
+	mcp7940: rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&i2c3 {
+	codec@1a {
+		status = "disabled";
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pcf8574_1: gpio@38 {
+		compatible = "nxp,pcf8574";
+		reg = <0x38>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_COMM3", "LED_R_COMM3", "LED_G_COMM3",
+				  "TP14", "TP15", "LED_G_COMM4", "LED_R_COMM4",
+				  "LED_B_COMM4";
+	};
+
+	pcf8574_2: gpio@39 {
+		compatible = "nxp,pcf8574";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_COMM2", "LED_G_COMM2", "LED_B_COMM1",
+				  "LED_R_COMM2", "LED_R_COMM1", "LED_G_COMM1",
+				  "TP16", "TP17";
+	};
+};
+
+/* Bluetooth */
+&uart2 {
+	status = "disabled";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* SD interface on expansion connector. */
+&usdhc2 {
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x13
+			MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x13
+			MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x13
+			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x13 /* SS0 */
+			MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x13 /* SC16 IRQ */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x13
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x13
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x13
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x13 /* SS0 */
+			MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20	0x13 /* SC16 IRQ */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1	0xc6 /* Enter */
+			MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23	0xc6 /* Exit */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1		0x00000156 /* D0 */
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x00000156 /* D1 */
+			MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x00000156 /* D2 */
+			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x00000156 /* D3 */
+			MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24	0x00000156 /* D4 */
+			MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x00000156 /* D5 */
+			MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x00000156 /* D6 */
+			MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25	0x00000156 /* D7 */
+			MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23	0x00000156 /* E */
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x00000156 /* RS */
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x00000156 /* R/W */
+		>;
+	};
+
+	pinctrl_rotary: rotarygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x00000156 /* A */
+			MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x00000156 /* B */
+		>;
+	};
+
+	/* Override Card Detect function GPIO value (GPIO1_IO10) from SOM: */
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x41
+		>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
index 3f1e49bfe38f..c07d59147ab5 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx";
 	compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
index a7a57442cb81..a6b94d1957c9 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
@@ -57,6 +57,15 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	/* Peripherals supply, enabled by Q2 after SOM_3V3 rises. */
+	reg_per_3v3: regulator-peripheral-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "per_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &ethphy {
@@ -79,6 +88,7 @@
 		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 		#gpio-cells = <2>;
 		wakeup-source;
+		vcc-supply = <&reg_per_3v3>;
 
 		/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
 		usb3-sata-sel-hog {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index b8946edf317b..b364307868f2 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -31,6 +31,14 @@
 		gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	reg_3v3_fixed: regulator-3v3-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &A53_0 {
@@ -234,6 +242,7 @@
 		compatible = "atmel,24c04";
 		reg = <0x52>;
 		pagesize = <16>;
+		vcc-supply = <&reg_3v3_fixed>;
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 79c3d597809e..080778680108 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -637,6 +637,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mn-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
index 0bea0798d2db..a08057410bde 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -94,6 +94,17 @@
 		};
 	};
 
+	bridge-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -153,6 +164,21 @@
 		enable-active-high;
 	};
 
+	sound-adv7535 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-adv7535";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&adv_bridge>;
+		};
+	};
+
 	sound-dmic {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "sound-pdm";
@@ -208,7 +234,7 @@
 	status = "okay";
 
 	tpm: tpm@0 {
-		compatible = "infineon,slb9670";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tpm>;
@@ -274,6 +300,35 @@
 		#interrupt-cells = <2>;
 	};
 
+	adv_bridge: hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+		reg-names = "main", "cec", "edid", "packet";
+		adi,dsi-lanes = <4>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+
 	pcieclk: clock-generator@68 {
 		compatible = "renesas,9fgv0241";
 		reg = <0x68>;
@@ -398,6 +453,10 @@
 	};
 };
 
+&lcdif1 {
+	status = "okay";
+};
+
 &micfil {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pdm>;
@@ -407,6 +466,21 @@
 	status = "okay";
 };
 
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
@@ -433,6 +507,16 @@
 	status = "okay";
 };
 
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -612,6 +696,14 @@
 		>;
 	};
 
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC	0xd6
+		>;
+	};
+
 	pinctrl_tpm: tpmgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19 /* Reset */
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index d98a040860a4..5828c9d7821d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -486,7 +486,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
+	status = "disabled";
 };
 
 &usb3_phy0 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
index 267ceffc02d8..2c19766ebf09 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -75,7 +75,7 @@
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
-	phy-connection-type = "rgmii-id";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	status = "okay";
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
index 0afd90224a59..b11d694b98e1 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
@@ -63,6 +63,50 @@
 		regulator-always-on;
 	};
 
+	reg_csi1_1v8: regulator-csi1-vdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "CSI1_VDD1V8";
+		gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_baseboard_vdd3v3>;
+	};
+
+	reg_csi1_3v3: regulator-csi1-vdd3v3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "CSI1_VDD3V3";
+		gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd5v0>;
+	};
+
+	reg_csi2_1v8: regulator-csi2-vdd1v8 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_csi2_1v8>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "CSI2_VDD1V8";
+		gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_baseboard_vdd3v3>;
+	};
+
+	reg_csi2_3v3: regulator-csi2-vdd3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_csi2_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "CSI2_VDD3V3";
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd5v0>;
+	};
+
 	regulator-vbus-usb20 {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <5000000>;
@@ -413,6 +457,18 @@
 		>;
 	};
 
+	pinctrl_reg_csi2_1v8: regcsi21v8grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x19
+		>;
+	};
+
+	pinctrl_reg_csi2_3v3: regcsi23v3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x19
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x14f
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
index bc312aa1bfc8..91094c227744 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
@@ -6,6 +6,8 @@
 
 #include "imx8mp.dtsi"
 
+#include <dt-bindings/leds/common.h>
+
 / {
 	model = "Polyhex i.MX8MPlus Debix SOM A";
 	compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp";
@@ -20,6 +22,20 @@
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
 };
 
 &A53_0 {
@@ -203,6 +219,12 @@
 };
 
 &iomuxc {
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16		0x19
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c2
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index d8963f32ec84..43f1d45ccc96 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -255,7 +255,7 @@
 				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
-		reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 
 		ports {
@@ -420,6 +420,18 @@
 		reg = <0x53>;
 	};
 
+	eeprom0wl: eeprom@58 {
+		compatible = "atmel,24c32d-wl";	/* M24C32-D WL page of 0x50 */
+		pagesize = <32>;
+		reg = <0x58>;
+	};
+
+	eeprom1wl: eeprom@5b {
+		compatible = "atmel,24c32d-wl";	/* M24C32-D WL page of 0x53 */
+		pagesize = <32>;
+		reg = <0x5b>;
+	};
+
 	ioexp: gpio@74 {
 		compatible = "nxp,pca9539";
 		reg = <0x74>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index cc9d468b43ab..f87fa5a948cc 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -137,6 +137,28 @@
 		};
 
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_vdev0vring0: vdev0vring0@942f0000 {
+			reg = <0 0x942f0000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0vring1: vdev0vring1@942f8000 {
+			reg = <0 0x942f8000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0buffer: vdev0buffer@94300000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x94300000 0 0x100000>;
+			no-map;
+		};
+	};
 };
 
 &flexspi {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
index e4215c83ee0f..da4b1807c275 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -57,8 +57,8 @@
 		clocks = <&clk IMX8MP_CLK_CLKOUT1>;
 		#sound-dai-cells = <0>;
 
-		VDDA-supply  = <&reg_vcc_3v3_audio>;
-		VDDD-supply  = <&reg_vcc_1v8_audio>;
+		VDDA-supply = <&reg_vcc_3v3_audio>;
+		VDDD-supply = <&reg_vcc_1v8_audio>;
 		VDDIO-supply = <&reg_vcc_1v8_audio>;
 	};
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
new file mode 100644
index 000000000000..59813ef8e2bb
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
@@ -0,0 +1,711 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "imx8mp.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		/* some of this aliases like backlight0, ethernetX and switch0
+		 * are needed for the bootloader.
+		 */
+		backlight0 = &backlight;
+		ethernet0 = &eqos;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+		switch0 = &switch;
+	};
+
+	/*
+	 * Backlight is present only on some of boards, so it is disabled by
+	 * default.
+	 */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 20000 0>;
+		power-supply = <&reg_24v>;
+		enable-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			label = "D1";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "D2";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "D3";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_1v2: regulator-1v2 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_p>;
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_s>;
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_s>;
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/*
+	 * This regulator will provide power as long as possible even if
+	 * undervoltage is detected.
+	 */
+	reg_5v_p: regulator-5v-p {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_P";
+		vin-supply = <&reg_24v>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/*
+	 * This regulator will be automatically shutdown if undervoltage is
+	 * detected.
+	 */
+	reg_5v_s: regulator-5v-s {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_S";
+		vin-supply = <&reg_24v>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_24v: regulator-24v {
+		compatible = "regulator-fixed";
+		regulator-name = "24V";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+	};
+
+	reg_can2rs: regulator-can2rs {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN2RS";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can2rs>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_canrs: regulator-canrs {
+		compatible = "regulator-fixed";
+		regulator-name = "CANRS";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_canrs>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_tft_vcom: regulator-tft-vcom {
+		compatible = "pwm-regulator";
+		pwms = <&pwm4 0 20000 0>;
+		regulator-name = "VCOM";
+		vin-supply = <&reg_5v_s>;
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-always-on;
+		voltage-table = <3600000 26>;
+		status = "disabled";
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
+		vin-supply = <&reg_vdd_3v3>;
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc: adc@0 {
+		compatible = "microchip,mcp3002";
+		reg = <0>;
+		vref-supply = <&reg_vdd_3v3>;
+		spi-max-frequency = <1000000>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-txid";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_canrs>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2rs>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>;
+		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-name = "VDD_SOC";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram_1v1: BUCK6 {
+				regulator-name = "NVCC_DRAM_1V1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs_1v8: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda_1v8: LDO3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd2: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	i2c_rtc: rtc@51 {
+		compatible = "nxp,pcf85063tp";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>;
+		quartz-load-femtofarads = <12500>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <380000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	switch: switch@5f {
+		compatible = "microchip,ksz9893";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_switch>;
+		reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+		reg = <0x5f>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan1: port@0 {
+				reg = <0>;
+				phy-mode = "internal";
+				label = "lan1";
+			};
+
+			lan2: port@1 {
+				reg = <1>;
+				phy-mode = "internal";
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "cpu";
+				ethernet = <&eqos>;
+				phy-mode = "rgmii";
+				/* 2ns RX delay is implemented on PCB */
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <0>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+/* SD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	vqmmc-supply = <&reg_nvcc_sd2>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24			0x0100
+		>;
+	};
+
+	pinctrl_can2rs: can2rsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22			0x154
+		>;
+	};
+
+	pinctrl_canrs: canrsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21			0x154
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK			0x44
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI			0x44
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO			0x44
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13			0x40
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX				0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX				0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX				0x154
+			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX				0x154
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05			0x19
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06			0x19
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07			0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL				0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA				0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03			0x41
+			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04			0x41
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT			0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT			0x116
+		>;
+	};
+
+	pinctrl_reg_vsd_3v3: regvsd3v3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31			0x41
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00			0x41
+			MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01			0x41
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			/* CTP_INT */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28			0x41
+			/* CTP_RST */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29			0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX			0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX			0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS			0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX			0x14f
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX			0x14f
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12			0x1c4
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20				0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B			0xc6
+		>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
new file mode 100644
index 000000000000..c1ca69da3cb8
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - HDMI";
+	compatible = "skov,imx8mp-skov-revb-hdmi", "fsl,imx8mp";
+};
+
+&iomuxc {
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL		0x1c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA		0x1c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD			0x19
+		>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
new file mode 100644
index 000000000000..ccbd3abedd69
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - LT6";
+	compatible = "skov,imx8mp-skov-revb-lt6", "fsl,imx8mp";
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <65000>;
+		touchscreen-inverted-y;
+		touchscreen-swapped-x-y;
+		touchscreen-x-plate-ohms = <300>;
+	};
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3600000>;
+	regulator-max-microvolt = <3600000>;
+	voltage-table = <3600000 26>;
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touch>;
+		pinctrl-names ="default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK			0x44
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI			0x44
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO			0x44
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09			0x40
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* external pull up */
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25			0x40
+		>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
new file mode 100644
index 000000000000..3c2efdc59bfa
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - MI1010AIT-1CP1";
+	compatible = "skov,imx8mp-skov-revb-mi1010ait-1cp1", "fsl,imx8mp";
+
+	panel {
+		compatible = "multi-inno,mi1010ait-1cp";
+		backlight = <&backlight>;
+		power-supply = <&reg_tft_vcom>;
+
+		port {
+			in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+		vcc-supply = <&reg_vdd_3v3>;
+		iovcc-supply = <&reg_vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	/* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
+	assigned-clock-rates = <482300000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&in_lvds0>;
+			};
+		};
+	};
+};
+
+&media_blk_ctrl {
+	/* currently it is not possible to let display clocks confugure
+	 * automatically, so we need to set them manually
+	 */
+	assigned-clock-rates = <500000000>, <200000000>, <0>,
+		/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
+		<68900000>,
+		/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
+		<964600000>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA				0x400001c2
+		>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso
new file mode 100644
index 000000000000..5058cd9409c7
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+&{/} {
+	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&display {
+	compatible = "auo,g133han01";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dual-lvds-odd-pixels;
+
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dual-lvds-even-pixels;
+
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	assigned-clock-rates = <0>, <988400000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 4240e20d38ac..86d3da36e4f3 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -15,6 +15,7 @@
 / {
 	model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
 	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+	chassis-type = "embedded";
 
 	chosen {
 		stdout-path = &uart4;
@@ -55,6 +56,21 @@
 		clock-frequency = <25000000>;
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X29";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon0>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
 		pinctrl-names = "default";
@@ -168,6 +184,13 @@
 		enable-active-high;
 	};
 
+	reg_vcc_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_vcc_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -464,7 +487,7 @@
 		clock-names = "mclk";
 		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
 		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
-		iov-supply = <&reg_vcc_3v3>;
+		iov-supply = <&reg_vcc_1v8>;
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
@@ -602,7 +625,6 @@
 &usb3_1 {
 	fsl,disable-port-power-control;
 	fsl,permanently-attached;
-	dr_mode = "host";
 	status = "okay";
 };
 
@@ -626,13 +648,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		label = "X29";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon0>;
-		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
index bf47b5e9dd8c..0e8d0f3c7ea8 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
@@ -8,6 +8,21 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -132,13 +147,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "Type-C";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
index f942e949084b..41c79d2ebdd6 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -8,6 +8,21 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -83,8 +98,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio4 {
@@ -175,13 +197,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "otg";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
@@ -285,6 +304,7 @@
 			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
 			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
 			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
 		>;
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
index b0d42b18c5ce..d5c400b355af 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -8,6 +8,21 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -100,7 +115,7 @@
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};
@@ -201,13 +216,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "otg";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 2ab9f4cc12cc..cae586cd45bd 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -35,6 +35,21 @@
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
 
+	connector {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -181,9 +196,7 @@
 	status = "okay";
 
 	tpm@0 {
-		compatible = "tcg,tpm_tis-spi";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x0>;
 		spi-max-frequency = <36000000>;
 	};
@@ -694,13 +707,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		label = "Type-C";
-		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
new file mode 100644
index 000000000000..8482393f3cac
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MP SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio3 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&eqos {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x106>, /* SODIMM 52 */
+			<MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x106>, /* SODIMM 54 */
+			<MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x106>, /* SODIMM 56 */
+			<MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x106>; /* SODIMM 58 */
+	};
+
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x82>; /* SODIMM 64 */
+	};
+
+	pinctrl_tpm_irq: tpmirqgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x16>; /* SODIMM 66 */
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000000..6a536a4964bb
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Mallow Board";
+	compatible = "toradex,verdin-imx8mp-nonwifi-mallow",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts
new file mode 100644
index 000000000000..08b7aef3fdde
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Mallow Board";
+	compatible = "toradex,verdin-imx8mp-wifi-mallow",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index 04f2083c4ab2..c3305f0d4001 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -45,6 +45,23 @@
 		status = "disabled";
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_1_id>;
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb1_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -835,15 +852,10 @@
 	srp-disable;
 	usb-role-switch;
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-		label = "Type-C";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_1_id>;
-		self-powered;
-		type = "micro";
-		vbus-supply = <&reg_usb1_vbus>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 3ac1bd823624..33bcb1e4e4d1 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -264,6 +264,7 @@
 		dsp_reserved: dsp@92400000 {
 			reg = <0 0x92400000 0 0x2000000>;
 			no-map;
+			status = "disabled";
 		};
 	};
 
@@ -726,6 +727,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mp-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -793,8 +796,8 @@
 							 <&clk IMX8MP_CLK_AUDIO_AXI>;
 						assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
 								  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>;
-						assigned-clock-parents =  <&clk IMX8MP_SYS_PLL1_800M>,
-									  <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
 						assigned-clock-rates = <400000000>,
 								       <600000000>;
 					};
@@ -887,6 +890,15 @@
 						clocks = <&clk IMX8MP_CLK_ML_AXI>,
 							 <&clk IMX8MP_CLK_ML_AHB>,
 							 <&clk IMX8MP_CLK_NPU_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
+								  <&clk IMX8MP_CLK_ML_AXI>,
+								  <&clk IMX8MP_CLK_ML_AHB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <800000000>,
+								       <800000000>,
+								       <300000000>;
 					};
 				};
 			};
@@ -1808,7 +1820,7 @@
 					compatible = "fsl,imx8mp-ldb";
 					reg = <0x5c 0x4>, <0x128 0x4>;
 					reg-names = "ldb", "lvds";
-					clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+					clocks = <&clk IMX8MP_CLK_MEDIA_LDB_ROOT>;
 					clock-names = "ldb";
 					assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
 					assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
@@ -2012,6 +2024,18 @@
 			interconnect-names = "g1", "g2", "vc8000e";
 		};
 
+		npu: npu@38500000 {
+			compatible = "vivante,gc";
+			reg = <0x38500000 0x200000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_ML_AXI>,
+				 <&clk IMX8MP_CLK_ML_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			power-domains = <&pgc_mlmix>;
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
index 6376417e918c..d8cf1f27c3ec 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -65,7 +65,7 @@
 	status = "okay";
 
 	tpm@0 {
-		compatible = "infineon,slb9670";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <43000000>;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index a3b9d615a3b4..e34045d10a12 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -39,7 +39,7 @@
 
 	fan: gpio-fan {
 		compatible = "gpio-fan";
-		gpio-fan,speed-map = <0 0 8600 1>;
+		gpio-fan,speed-map = <0 0>, <8600 1>;
 		gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
 		#cooling-cells = <2>;
 		pinctrl-names = "default";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
index 0d8def2766f5..b302daca4ce6 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx";
 	compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index 8439dd6b3935..69cb8676732e 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -128,21 +128,25 @@
 &lpuart0 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart1 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart2 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 17 0 0>, <&edma2 16 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart3 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 19 0 0>, <&edma2 18 0 1>;
+	dma-names = "rx","tx";
 };
 
 &i2c0 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 99611729943c..8360bb851ac0 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -31,7 +31,7 @@
 	};
 
 	gpio-sbu-mux {
-		compatible = "gpio-sbu-mux";
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec_mux>;
 		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
@@ -50,6 +50,10 @@
 	status = "okay";
 };
 
+&dsp_reserved {
+	status = "okay";
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
@@ -152,12 +156,6 @@
 		interrupt-parent = <&lsio_gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
-		port {
-			typec_dr_sw: endpoint {
-				remote-endpoint = <&usb3_drd_sw>;
-			};
-		};
-
 		usb_con1: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -169,8 +167,17 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
 				port@1 {
 					reg = <1>;
+
 					typec_con_ss: endpoint {
 						remote-endpoint = <&usb3_data_ss>;
 					};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
new file mode 100644
index 000000000000..7894a3ab26d6
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+&vpu_core0 {
+	reg = <0x2d040000 0x10000>;
+};
+
+&vpu_core1 {
+	reg = <0x2d050000 0x10000>;
+};
+
+/delete-node/ &mu2_m0;
+/delete-node/ &vpu_core2;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8qxp.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index c80c85a4b405..958267b33340 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -48,7 +48,6 @@
 		serial3 = &lpuart3;
 		vpu-core0 = &vpu_core0;
 		vpu-core1 = &vpu_core1;
-		vpu-core2 = &vpu_core2;
 	};
 
 	cpus {
@@ -184,6 +183,7 @@
 		dsp_reserved: dsp@92400000 {
 			reg = <0 0x92400000 0 0x2000000>;
 			no-map;
+			status = "disabled";
 		};
 
 		encoder_rpc: encoder-rpc@94400000 {
@@ -317,6 +317,7 @@
 };
 
 #include "imx8qxp-ss-img.dtsi"
+#include "imx8qxp-ss-vpu.dtsi"
 #include "imx8qxp-ss-adma.dtsi"
 #include "imx8qxp-ss-conn.dtsi"
 #include "imx8qxp-ss-lsio.dtsi"
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 2b9d47716f75..9921ea13ab48 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -76,6 +76,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <12000>;
 		enable-active-high;
 	};
 };
@@ -237,18 +238,19 @@
 		>;
 	};
 
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
-			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
-			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
-			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
-			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
-			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
-			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
-			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
-			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
-			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
 			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
 		>;
 	};
@@ -265,14 +267,15 @@
 		>;
 	};
 
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
-			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x400013fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x400013fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x400013fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x400013fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013fe
 			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
new file mode 100644
index 000000000000..af795ecf678b
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -0,0 +1,709 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx93-tqma9352.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa93xxCA starter kit";
+	compatible = "tq,imx93-tqma9352-mba93xxca",
+		     "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm5 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwmfan>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&tpm6 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_12v0>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_active0: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+
+				cpu_active1: trip-active1 {
+					temperature = <48000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+
+				cpu_active2: trip-active2 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&cpu_active0>;
+					cooling-device = <&fan0 1 1>;
+				};
+
+				map2 {
+					trip = <&cpu_active1>;
+					cooling-device = <&fan0 2 2>;
+				};
+
+				map3 {
+					trip = <&cpu_active2>;
+					cooling-device = <&fan0 3 3>;
+				};
+			};
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	expander-irq-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "PEX_INT#";
+	};
+
+	tcpc-irq-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "USB_C_ALERT#";
+	};
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "FAN_PWR_EN", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the on board USB Hub reset which is low
+		 * active as reset signal. The output-low states, the
+		 * signal is inactive, e.g. no reset
+		 */
+		usb-reset-hog {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "USB_RESET#";
+		};
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-high states, the signal
+		 * is active, e.g. card is powered down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-high states, the signal
+		 * is active, e.g. card is disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-high states, the signal
+		 * is active, e.g. card in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "DP_EN",
+				  "MIPI_CSI_EN", "MIPI_CSI_RST#",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpi2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5>;
+	status = "okay";
+};
+
+&lpspi6 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpspi6>;
+	pinctrl-1 = <&pinctrl_lpspi6>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* disabled per default, console for M33 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&lpuart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "okay";
+};
+
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&tpm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm6>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC		0x51e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO		0x4000051e
+			/* PD | FSEL_2 | DSE X6 */
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2		0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3		0x57e
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2		0x51e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3		0x51e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+		>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x1306
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000051e
+			/* PD | FSEL_2 | DSE X6 */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x51e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x51e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x51e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x51e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
+		>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27		0x1306
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX		0x139e
+			MX93_PAD_GPIO_IO27__CAN2_RX		0x139e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpspi6: lpspi6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO00__LPSPI6_PCS0		0x3fe
+			MX93_PAD_GPIO_IO01__LPSPI6_SIN		0x3fe
+			MX93_PAD_GPIO_IO02__LPSPI6_SOUT		0x3fe
+			MX93_PAD_GPIO_IO03__LPSPI6_SCK		0x3fe
+		>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__GPIO1_IO12		0x1306
+		>;
+	};
+
+	pinctrl_pwmfan: pwmfangrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO09__GPIO2_IO09		0x1306
+		>;
+	};
+
+	pinctrl_tpm5: tpm5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO06__TPM5_CH0		0x57e
+		>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO08__TPM6_CH0		0x57e
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__GPIO1_IO02		0x1306
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX93_PAD_UART2_TXD__LPUART2_TX		0x31e
+			MX93_PAD_UART2_RXD__LPUART2_RX		0x31e
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B   0x51e
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO14__LPUART3_TX		0x31e
+			MX93_PAD_GPIO_IO15__LPUART3_RX		0x31e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO04__LPUART6_TX		0x31e
+			MX93_PAD_GPIO_IO05__LPUART6_RX		0x31e
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO12__LPUART8_TX		0x31e
+			MX93_PAD_GPIO_IO13__LPUART8_RX		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = <
+			/* HYS | PD | PU | FSEL_3 | DSE X5 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17be
+			/* HYS | PD | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			/* HYS | PD | PU | FSEL_3 | DSE X3 */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			/* PD | PU | FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+		>;
+	};
+
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = <
+			/* HYS | PD | PU | FSEL_3 | DSE X6 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17fe
+			/* HYS | PD | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
+			/* PD | PU | FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+		>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 3c5c67ebee5d..eb3f4cfb6986 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -18,6 +18,7 @@
 	model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC";
 	compatible = "tq,imx93-tqma9352-mba93xxla",
 		     "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
 
 	chosen {
 		stdout-path = &lpuart1;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
index 34c0540276d1..8f2e7c42ad6e 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -171,6 +171,18 @@
 		status = "disabled";
 	};
 
+	mqs1: mqs1 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&aonmix_ns_gpr>;
+		status = "disabled";
+	};
+
+	mqs2: mqs2 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&wakeupmix_gpr>;
+		status = "disabled";
+	};
+
 	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -282,6 +294,19 @@
 				status = "disabled";
 			};
 
+			i3c1: i3c-master@44330000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_I3C1_GATE>,
+					 <&clk IMX93_CLK_I3C1_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
 			lpi2c1: i2c@44340000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44340000 0x10000>;
@@ -367,6 +392,19 @@
 				status = "disabled";
 			};
 
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			iomuxc: pinctrl@443c0000 {
 				compatible = "fsl,imx93-iomuxc";
 				reg = <0x443c0000 0x10000>;
@@ -395,6 +433,8 @@
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
 				clock-names = "osc_32k", "osc_24m", "clk_ext1";
+				assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
+				assigned-clock-rates = <393216000>;
 				status = "okay";
 			};
 
@@ -422,9 +462,10 @@
 				};
 			};
 
-			anatop: anatop@44480000 {
-				compatible = "fsl,imx93-anatop", "syscon";
+			clock-controller@44480000 {
+				compatible = "fsl,imx93-anatop";
 				reg = <0x44480000 0x2000>;
+				#clock-cells = <1>;
 			};
 
 			tmu: tmu@44482000 {
@@ -447,6 +488,21 @@
 				#thermal-sensor-cells = <1>;
 			};
 
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx93-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_PDM_IPG>,
+					 <&clk IMX93_CLK_PDM_GATE>,
+					 <&clk IMX93_CLK_AUDIO_PLL>;
+				clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
+				dmas = <&edma1 29 0 5>;
+				dma-names = "rx";
+				status = "disabled";
+			};
 
 			adc1: adc@44530000 {
 				compatible = "nxp,imx93-adc";
@@ -473,7 +529,6 @@
 				compatible = "fsl,imx93-edma4";
 				reg = <0x42000000 0x210000>;
 				#dma-cells = <3>;
-				shared-interrupt;
 				dma-channels = <64>;
 				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
@@ -616,6 +671,19 @@
 				status = "disabled";
 			};
 
+			i3c2: i3c-master@42520000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_I3C2_GATE>,
+					 <&clk IMX93_CLK_I3C2_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
 			lpi2c3: i2c@42530000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42530000 0x10000>;
@@ -738,6 +806,51 @@
 				status = "disabled";
 			};
 
+			sai2: sai@42650000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 59 0 1>, <&edma2 58 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai3: sai@42660000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 61 0 1>, <&edma2 60 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			xcvr: xcvr@42680000 {
+				compatible = "fsl,imx93-xcvr";
+				reg = <0x42680000 0x800>,
+				      <0x42680800 0x400>,
+				      <0x42680c00 0x080>,
+				      <0x42680e00 0x080>;
+				reg-names = "ram", "regs", "rxfifo", "txfifo";
+				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_SPDIF_GATE>,
+					 <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
+				clock-names = "ipg", "phy", "spba", "pll_ipg";
+				dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			lpuart7: serial@42690000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42690000 0x1000>;
@@ -755,7 +868,7 @@
 				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
 				clock-names = "ipg";
-				dmas =  <&edma2 90 0 1>, <&edma2 89 0 0>;
+				dmas = <&edma2 90 0 1>, <&edma2 89 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -874,7 +987,7 @@
 					 <&clk IMX93_CLK_USDHC1_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <8>;
-				fsl,tuning-start-tap = <20>;
+				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
@@ -888,7 +1001,7 @@
 					 <&clk IMX93_CLK_USDHC2_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
-				fsl,tuning-start-tap = <20>;
+				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
@@ -951,7 +1064,7 @@
 					 <&clk IMX93_CLK_USDHC3_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
-				fsl,tuning-start-tap = <20>;
+				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
index 970047f2dabd..299c4ab630e8 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -10,10 +10,9 @@
 / {
 	spmi: spmi@fff24000 {
 		compatible = "hisilicon,kirin970-spmi-controller";
+		reg = <0x0 0xfff24000 0x0 0x1000>;
 		#address-cells = <2>;
 		#size-cells = <0>;
-		status = "okay";
-		reg = <0x0 0xfff24000 0x0 0x1000>;
 		hisilicon,spmi-channel = <2>;
 
 		pmic: pmic@0 {
@@ -25,9 +24,6 @@
 			gpios = <&gpio28 0 0>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ldo3: ldo3 { /* HDMI */
 					regulator-name = "ldo3";
 					regulator-min-microvolt = <1500000>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index d3adb6a130ae..76aafa172eb0 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -60,6 +60,25 @@
 		};
 	};
 
+	firmware {
+		svc {
+			compatible = "intel,agilex-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+
+			fpga_mgr: fpga-mgr {
+				compatible = "intel,agilex-soc-fpga-mgr";
+			};
+		};
+	};
+
+	fpga-region {
+		compatible = "fpga-region";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		fpga-mgr = <&fpga_mgr>;
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
@@ -130,7 +149,7 @@
 		compatible = "usb-nop-xceiv";
 	};
 
-	soc {
+	soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -138,13 +157,6 @@
 		interrupt-parent = <&intc>;
 		ranges = <0 0 0 0xffffffff>;
 
-		base_fpga_region {
-			#address-cells = <0x2>;
-			#size-cells = <0x2>;
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-
 		clkmgr: clock-controller@ffd10000 {
 			compatible = "intel,agilex-clkmgr";
 			reg = <0xffd10000 0x1000>;
@@ -368,7 +380,7 @@
 			pinctrl-single,function-mask = <0x0000000f>;
 		};
 
-		pinctrl1: pinconf@ffd13100 {
+		pinctrl1: pinctrl@ffd13100 {
 			compatible = "pinctrl-single";
 			#pinctrl-cells = <1>;
 			reg = <0xffd13100 0x20>;
@@ -659,17 +671,5 @@
 
 			status = "disabled";
 		};
-
-		firmware {
-			svc {
-				compatible = "intel,agilex-svc";
-				method = "smc";
-				memory-region = <&service_reserved>;
-
-				fpga_mgr: fpga-mgr {
-					compatible = "intel,agilex-soc-fpga-mgr";
-				};
-			};
-		};
 	};
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
index dcdaf7064953..d66d425e45b7 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -73,7 +73,7 @@
 		ranges;
 		#interrupt-cells = <3>;
 		#address-cells = <2>;
-		#size-cells =<2>;
+		#size-cells = <2>;
 		interrupt-controller;
 		#redistributor-regions = <1>;
 		redistributor-stride = <0x0 0x20000>;
@@ -315,7 +315,7 @@
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
 			dmas = <&dmac0 2>, <&dmac0 3>;
-			dma-names ="tx", "rx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
index 1a32840c74e0..d22de06e9839 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
@@ -26,7 +26,7 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
-	soc {
+	soc@0 {
 		bus@80000000 {
 			compatible = "simple-bus";
 			reg = <0x80000000 0x60000000>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index 053690657675..ad99aefeb185 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -113,8 +113,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <2>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
index 5ddfdff37c25..2d70a92c2090 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
@@ -25,12 +25,11 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
-	soc {
+	soc@0 {
 		sdram_edac: memory-controller@f87f8000 {
 			compatible = "snps,ddrc-3.80a";
 			reg = <0xf87f8000 0x400>;
 			interrupts = <0 175 4>;
-			status = "okay";
 		};
 	};
 };
@@ -91,8 +90,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <2>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/lg/lg1312.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/lg/lg1312.dtsi
index 48ec4ebec0a8..b864ffa74ea8 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -126,7 +126,6 @@
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/lg/lg1313.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/lg/lg1313.dtsi
index 3869460aa5dc..996fb39bb50c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -126,7 +126,6 @@
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/Makefile linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/Makefile
index 79ac09b58a89..99b8cb3c49e1 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/Makefile
@@ -26,4 +26,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts
new file mode 100644
index 000000000000..2a0b07000089
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * Utilizing the CN913x COM Express CPU module board.
+ * This specific carrier board in this mode of operation (external)
+ * only maintains a PCIe link with the CPU module,
+ * which does not require any special DTS definitions.
+ *
+ * AC5X RD works here in external mode (switch selectable at the back of the
+ * board), and connect via an external cable a kit
+ * which would allow it to use an external CN9131 CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier, only on the
+ * CN9131 COM Express CPU module.
+ * What runs the Linux is the CN9131 on the COM Express CPU module,
+ * And it accesses the switch end-point on the AC5X RD portion of the carrier
+ * via PCIe.
+ */
+
+#include "cn9131-db-comexpress.dtsi"
+#include "ac5x-rd-carrier.dtsi"
+
+/ {
+	model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board with CN9131 CPU module";
+	compatible = "marvell,cn9131-ac5x-carrier", "marvell,rd-ac5x-carrier",
+			"marvell,cn9131-cpu-module", "marvell,cn9131",
+			"marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x2 0x00000000>;
+	};
+
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
new file mode 100644
index 000000000000..f98629abb58b
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * This specific board in external mode (see below) only maintains
+ * a PCIe link with the COM Express CPU module, which does not
+ * require any special DTS definitions.
+ *
+ * AC5X RD can either work as you would expect, as a complete standalone
+ * box using the internal CPU, or you can move the switch on the back of
+ * the box to "external" mode, and connect via an external cable a kit
+ * which would allow it to use an external CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ * This is a development/reference solution, not a full commercial solution,
+ * hence it was designed with the flexibility to be configured in different
+ * modes of operation.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier,
+ * only on the COM Express CPU module.
+ */
+
+/ {
+	model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board";
+	compatible = "marvell,rd-ac5x-carrier";
+
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
index f9abef8dcc94..870bb380a40a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -126,32 +126,32 @@
 
 	reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
 
-	ports {
-		switch0port1: port@1 {
+	ethernet-ports {
+		switch0port1: ethernet-port@1 {
 			reg = <1>;
 			label = "lan0";
 			phy-handle = <&switch0phy0>;
 		};
 
-		switch0port2: port@2 {
+		switch0port2: ethernet-port@2 {
 			reg = <2>;
 			label = "lan1";
 			phy-handle = <&switch0phy1>;
 		};
 
-		switch0port3: port@3 {
+		switch0port3: ethernet-port@3 {
 			reg = <3>;
 			label = "lan2";
 			phy-handle = <&switch0phy2>;
 		};
 
-		switch0port4: port@4 {
+		switch0port4: ethernet-port@4 {
 			reg = <4>;
 			label = "lan3";
 			phy-handle = <&switch0phy3>;
 		};
 
-		switch0port5: port@5 {
+		switch0port5: ethernet-port@5 {
 			reg = <5>;
 			label = "wan";
 			phy-handle = <&extphy>;
@@ -160,7 +160,7 @@
 	};
 
 	mdio {
-		switch0phy3: switch0phy3@14 {
+		switch0phy3: ethernet-phy@14 {
 			reg = <0x14>;
 		};
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
index 49cbdb55b4b3..fed2dcecb323 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -145,19 +145,17 @@
 };
 
 &mdio {
-	switch0: switch0@1 {
+	switch0: ethernet-switch@1 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <1>;
 
 		dsa,member = <0 0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0port0: port@0 {
+			switch0port0: ethernet-port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
@@ -168,19 +166,19 @@
 				};
 			};
 
-			switch0port1: port@1 {
+			switch0port1: ethernet-port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			switch0port2: port@2 {
+			switch0port2: ethernet-port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
 			};
 
-			switch0port3: port@3 {
+			switch0port3: ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;
@@ -192,13 +190,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
index b1b45b4fa9d4..63fbc8352161 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -152,31 +152,29 @@
 };
 
 &mdio {
-	switch0: switch0@1 {
+	switch0: ethernet-switch@1 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <1>;
 
 		dsa,member = <0 0>;
 
-		ports: ports {
+		ports: ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
@@ -185,7 +183,7 @@
 				nvmem-cell-names = "mac-address";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;
@@ -199,13 +197,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 9eab2bb22134..f1a9f2234359 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -130,7 +130,7 @@
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 		interrupt-parent = <&gpiosb>;
-		interrupts = <5 0>; /* GPIO2_5 */
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */
 	};
 };
 
@@ -304,9 +304,15 @@
 		reg = <1>;
 	};
 
-	/* switch nodes are enabled by U-Boot if modules are present */
+	/*
+	 * NOTE: switch nodes are enabled by U-Boot if modules are present
+	 * DO NOT change this node name (switch0@10) even if it is not following
+	 * conventions! Deployed U-Boot binaries are explicitly looking for
+	 * this node in order to augment the device tree!
+	 * Also do not touch the "ports" or "port@n" nodes. These are also ABI.
+	 */
 	switch0@10 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x10>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -317,35 +323,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -430,8 +436,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch0@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -442,19 +449,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1_topaz: switch0phy1@11 {
+			switch0phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy2_topaz: switch0phy2@12 {
+			switch0phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy3_topaz: switch0phy3@13 {
+			switch0phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy4_topaz: switch0phy4@14 {
+			switch0phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
@@ -497,8 +504,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch1@11 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x11>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -509,35 +517,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1phy1: switch1phy1@1 {
+			switch1phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch1phy2: switch1phy2@2 {
+			switch1phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch1phy3: switch1phy3@3 {
+			switch1phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch1phy4: switch1phy4@4 {
+			switch1phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch1phy5: switch1phy5@5 {
+			switch1phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch1phy6: switch1phy6@6 {
+			switch1phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch1phy7: switch1phy7@7 {
+			switch1phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch1phy8: switch1phy8@8 {
+			switch1phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -622,8 +630,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch1@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -634,19 +643,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1phy1_topaz: switch1phy1@11 {
+			switch1phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch1phy2_topaz: switch1phy2@12 {
+			switch1phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch1phy3_topaz: switch1phy3@13 {
+			switch1phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch1phy4_topaz: switch1phy4@14 {
+			switch1phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
@@ -689,8 +698,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch2@12 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x12>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -701,35 +711,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2phy1: switch2phy1@1 {
+			switch2phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch2phy2: switch2phy2@2 {
+			switch2phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch2phy3: switch2phy3@3 {
+			switch2phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch2phy4: switch2phy4@4 {
+			switch2phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch2phy5: switch2phy5@5 {
+			switch2phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch2phy6: switch2phy6@6 {
+			switch2phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch2phy7: switch2phy7@7 {
+			switch2phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch2phy8: switch2phy8@8 {
+			switch2phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -805,8 +815,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch2@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -817,19 +828,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2phy1_topaz: switch2phy1@11 {
+			switch2phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch2phy2_topaz: switch2phy2@12 {
+			switch2phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch2phy3_topaz: switch2phy3@13 {
+			switch2phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch2phy4_topaz: switch2phy4@14 {
+			switch2phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
index 48202810bf78..40b7ee7ead72 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -301,10 +301,8 @@
 	};
 
 	/* 88E6141 Topaz switch */
-	switch: switch@3 {
+	switch: ethernet-switch@3 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <3>;
 
 		pinctrl-names = "default";
@@ -314,35 +312,35 @@
 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			swport1: port@1 {
+			swport1: ethernet-port@1 {
 				reg = <1>;
 				label = "lan0";
 				phy-handle = <&swphy1>;
 			};
 
-			swport2: port@2 {
+			swport2: ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&swphy2>;
 			};
 
-			swport3: port@3 {
+			swport3: ethernet-port@3 {
 				reg = <3>;
 				label = "lan2";
 				phy-handle = <&swphy3>;
 			};
 
-			swport4: port@4 {
+			swport4: ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&swphy4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp0_eth1>;
@@ -355,19 +353,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			swphy1: swphy1@17 {
+			swphy1: ethernet-phy@17 {
 				reg = <17>;
 			};
 
-			swphy2: swphy2@18 {
+			swphy2: ethernet-phy@18 {
 				reg = <18>;
 			};
 
-			swphy3: swphy3@19 {
+			swphy3: ethernet-phy@19 {
 				reg = <19>;
 			};
 
-			swphy4: swphy4@20 {
+			swphy4: ethernet-phy@20 {
 				reg = <20>;
 			};
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 4125202028c8..67892f0d2863 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -497,42 +497,42 @@
 		reset-deassert-us = <10000>;
 	};
 
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_switch_reset_pins>;
 		reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan2";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan4";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp1_eth2>;
@@ -545,19 +545,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy3: switch0phy3@14 {
+			switch0phy3: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 2c920e22cec2..7ec7c789d87e 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -138,7 +138,6 @@
 
 			odmi: odmi@300000 {
 				compatible = "marvell,odmi-controller";
-				interrupt-controller;
 				msi-controller;
 				marvell,odmi-frames = <4>;
 				reg = <0x300000 0x4000>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 47d45ff3d6f5..6fcc34f7b464 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -207,11 +207,9 @@
 		reg = <0>;
 	};
 
-	switch6: switch0@6 {
+	switch6: ethernet-switch@6 {
 		/* Actual device is MV88E6393X */
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <6>;
 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
@@ -220,59 +218,59 @@
 
 		dsa,member = <0 0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "p1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "p2";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "p3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "p4";
 				phy-handle = <&switch0phy4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "p5";
 				phy-handle = <&switch0phy5>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				label = "p6";
 				phy-handle = <&switch0phy6>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				reg = <7>;
 				label = "p7";
 				phy-handle = <&switch0phy7>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				reg = <8>;
 				label = "p8";
 				phy-handle = <&switch0phy8>;
 			};
 
-			port@9 {
+			ethernet-port@9 {
 				reg = <9>;
 				label = "p9";
 				phy-mode = "10gbase-r";
@@ -280,7 +278,7 @@
 				managed = "in-band-status";
 			};
 
-			port@a {
+			ethernet-port@a {
 				reg = <10>;
 				ethernet = <&cp0_eth0>;
 				phy-mode = "10gbase-r";
@@ -293,35 +291,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
new file mode 100644
index 000000000000..028496ebc473
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB Com Express CPU module board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-DB COM EXPRESS type 7 CPU module board";
+	compatible = "marvell,cn9130-cpu-module", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+	regulator-max-microvolt = <1800000>;
+	states = <1800000 0x1 1800000 0x0>;
+	/delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+	status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+	status = "disabled";
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_eth0 {
+	status = "disabled";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	phy0: ethernet-phy@0 {
+		status = "okay";
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_ge_mdio_pins: ge-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+	};
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_spi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
new file mode 100644
index 000000000000..6f3914bcfd01
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB Com Express CPU module board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9131-DB COM EXPRESS type 7 CPU module board";
+	compatible = "marvell,cn9131-cpu-module", "marvell,cn9131", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+	regulator-max-microvolt = <1800000>;
+	states = <1800000 0x1 1800000 0x0>;
+	/delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+	/delete-property/ gpio;
+};
+
+&cp1_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+	status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+	status = "disabled";
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_eth0 {
+	status = "disabled";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	phy0: ethernet-phy@0 {
+		status = "okay";
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_ge_mdio_pins: ge-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+	};
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_spi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp1_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp1_usb3_0_phy0>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy3 1>;
+	phy-names = "usb";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/Makefile linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/Makefile
index e6e7592a3645..1e6f91731e92 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/Makefile
@@ -32,10 +32,16 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel14-sku2.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-juniper-sku16.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kappa.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kenzo.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico6.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu-sku22.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku32.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku38.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku288.dtb
@@ -44,6 +50,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt6358.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt6358.dtsi
index b605313bed99..a1b96013f814 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt6358.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -8,8 +8,6 @@
 	pmic: pmic {
 		compatible = "mediatek,mt6358";
 		interrupt-controller;
-		interrupt-parent = <&pio>;
-		interrupts = <182 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 
 		mt6358codec: mt6358codec {
@@ -128,7 +126,6 @@
 			};
 
 			mt6358_vrf12_reg: ldo_vrf12 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -136,7 +133,6 @@
 			};
 
 			mt6358_vio18_reg: ldo_vio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -153,7 +149,6 @@
 			};
 
 			mt6358_vcamio_reg: ldo_vcamio {
-				compatible = "regulator-fixed";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -168,7 +163,6 @@
 			};
 
 			mt6358_vcn18_reg: ldo_vcn18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -176,7 +170,6 @@
 			};
 
 			mt6358_vfe28_reg: ldo_vfe28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vfe28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -193,7 +186,6 @@
 			};
 
 			mt6358_vcn28_reg: ldo_vcn28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -218,7 +210,6 @@
 			};
 
 			mt6358_vxo22_reg: ldo_vxo22 {
-				compatible = "regulator-fixed";
 				regulator-name = "vxo22";
 				regulator-min-microvolt = <2200000>;
 				regulator-max-microvolt = <2200000>;
@@ -234,7 +225,6 @@
 			};
 
 			mt6358_vaux18_reg: ldo_vaux18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaux18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -249,7 +239,6 @@
 			};
 
 			mt6358_vbif28_reg: ldo_vbif28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vbif28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -280,7 +269,6 @@
 			};
 
 			mt6358_vio28_reg: ldo_vio28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -288,7 +276,6 @@
 			};
 
 			mt6358_va12_reg: ldo_va12 {
-				compatible = "regulator-fixed";
 				regulator-name = "va12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -297,22 +284,14 @@
 			};
 
 			mt6358_vrf18_reg: ldo_vrf18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-enable-ramp-delay = <120>;
 			};
 
-			mt6358_vcn33_bt_reg: ldo_vcn33_bt {
-				regulator-name = "vcn33_bt";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3500000>;
-				regulator-enable-ramp-delay = <270>;
-			};
-
-			mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
-				regulator-name = "vcn33_wifi";
+			mt6358_vcn33_reg: ldo_vcn33 {
+				regulator-name = "vcn33";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3500000>;
 				regulator-enable-ramp-delay = <270>;
@@ -340,7 +319,6 @@
 			};
 
 			mt6358_vaud28_reg: ldo_vaud28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaud28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index c46682150e50..a1f42048dcc7 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -153,8 +153,7 @@
 			reg = <0>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
-			interrupt-parent = <&pio>;
-			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>;
 			reset-gpios = <&pio 54 0>;
 
 			ports {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index b876e501216b..d06d4af43cbf 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -205,8 +205,7 @@
 		reg = <31>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 66 IRQ_TYPE_LEVEL_HIGH>;
 		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
 	};
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
index bdcd35cecad9..90cbbc18a483 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
@@ -13,8 +13,7 @@
 	touchscreen2: touchscreen@34 {
 		compatible = "melfas,mip4_ts";
 		reg = <0x34>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	/*
@@ -26,8 +25,7 @@
 		compatible = "hid-over-i2c";
 		reg = <0x20>;
 		hid-descr-addr = <0x0020>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -39,8 +37,7 @@
 	 */
 	trackpad2: trackpad@2c {
 		compatible = "hid-over-i2c";
-		interrupt-parent = <&pio>;
-		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x2c>;
 		hid-descr-addr = <0x0020>;
 		wakeup-source;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index 111495622cac..8d614ac2c58e 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -245,8 +245,7 @@
 		reg = <0x1a>;
 		avdd-supply = <&mt6397_vgp1_reg>;
 		cpvdd-supply = <&mt6397_vcama_reg>;
-		interrupt-parent = <&pio>;
-		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_BOTH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&rt5650_irq>;
 		#sound-dai-cells = <1>;
@@ -308,8 +307,7 @@
 	da9211: da9211@68 {
 		compatible = "dlg,da9211";
 		reg = <0x68>;
-		interrupt-parent = <&pio>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
 
 		regulators {
 			da9211_vcpu_reg: BUCKA {
@@ -353,8 +351,7 @@
 	touchscreen: touchscreen@10 {
 		compatible = "elan,ekth3500";
 		reg = <0x10>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -366,8 +363,7 @@
 
 	trackpad: trackpad@15 {
 		compatible = "elan,ekth3000";
-		interrupt-parent = <&pio>;
-		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x15>;
 		vcc-supply = <&mt6397_vgp6_reg>;
 		wakeup-source;
@@ -439,8 +435,7 @@
 	btmrvl: btmrvl@2 {
 		compatible = "marvell,sd8897-bt";
 		reg = <2>;
-		interrupt-parent = <&pio>;
-		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 119 IRQ_TYPE_LEVEL_LOW>;
 		marvell,wakeup-pin = /bits/ 16 <0x0d>;
 		marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
 	};
@@ -448,8 +443,7 @@
 	mwifiex: mwifiex@1 {
 		compatible = "marvell,sd8897";
 		reg = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 38 IRQ_TYPE_LEVEL_LOW>;
 		marvell,wakeup-pin = <3>;
 	};
 };
@@ -933,8 +927,7 @@
 		compatible = "mediatek,mt6397";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
@@ -1160,8 +1153,7 @@
 		compatible = "google,cros-ec-spi";
 		reg = <0x0>;
 		spi-max-frequency = <12000000>;
-		interrupt-parent = <&pio>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 0 IRQ_TYPE_LEVEL_LOW>;
 		google,cros-ec-spi-msg-delay = <500>;
 
 		i2c_tunnel: i2c-tunnel0 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index d258c80213b2..0e5c628d1ec3 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -303,8 +303,7 @@
 
 	pmic: pmic {
 		compatible = "mediatek,mt6397";
-		interrupt-parent = <&pio>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index c47d7d900f28..cac4cd0a0320 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1368,10 +1368,9 @@
 			#clock-cells = <1>;
 		};
 
-		vcodec_dec: vcodec@16000000 {
+		vcodec_dec: vcodec@16020000 {
 			compatible = "mediatek,mt8173-vcodec-dec";
-			reg = <0 0x16000000 0 0x100>,	/* VDEC_SYS */
-			      <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
+			reg = <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
 			      <0 0x16021000 0 0x800>,	/* VDEC_LD */
 			      <0 0x16021800 0 0x800>,	/* VDEC_TOP */
 			      <0 0x16022000 0 0x1000>,	/* VDEC_CM */
@@ -1382,6 +1381,8 @@
 			      <0 0x16027000 0 0x800>,	/* VDEC_HWQ */
 			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
 			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
+			reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+				    "hwd", "hwq", "hwb", "hwg";
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
 			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
@@ -1392,6 +1393,7 @@
 				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
 			mediatek,vpu = <&vpu>;
+			mediatek,vdecsys = <&vdecsys>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>;
 			clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
 				 <&topckgen CLK_TOP_UNIVPLL_D2>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-evb.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index 77f9ab94c00b..681deddffc2a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -381,6 +381,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
index 2c69e7658dba..8b57706ac814 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -11,8 +11,7 @@
 		pinctrl-0 = <&da7219_pins>;
 		compatible = "dlg,da7219";
 		reg = <0x1a>;
-		interrupt-parent = <&pio>;
-		interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>;
+		interrupts-extended = <&pio 165 IRQ_TYPE_LEVEL_LOW>;
 
 		dlg,micbias-lvl = <2600>;
 		dlg,mic-amp-in-sel = "diff";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
index 0799c48ade19..548e22c194a2 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
@@ -11,8 +11,7 @@
 		pinctrl-0 = <&ts3a227e_pins>;
 		compatible = "ti,ts3a227e";
 		reg = <0x3b>;
-		interrupt-parent = <&pio>;
-		interrupts = <157 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 157 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 	};
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
index 552bfc726999..0b45aee2e299 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
@@ -18,8 +18,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
index 77b96ddf648e..b595622e7bee 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
@@ -30,8 +30,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
index 37e6e58f63b7..5a1c39318a6c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
@@ -17,8 +17,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
index 0e09604004d5..3ea4fdb40118 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
@@ -17,8 +17,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
new file mode 100644
index 000000000000..4eb2a0d571af
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google makomo sku0 board";
+	chassis-type = "laptop";
+	compatible = "google,makomo-sku0", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
new file mode 100644
index 000000000000..6a733361e8ae
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi"
+
+/ {
+	model = "Google makomo sku1 board";
+	chassis-type = "laptop";
+	compatible = "google,makomo-sku1", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
new file mode 100644
index 000000000000..8ce9568fee95
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku1", "google,pico", "mediatek,mt8183";
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
new file mode 100644
index 000000000000..a2e74b829320
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico6 board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku2", "google,pico", "mediatek,mt8183";
+
+	bt_wakeup: bt-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_wakeup>;
+
+		wobt {
+			label = "Wake on BT";
+			gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&wifi_wakeup {
+	wowlan {
+		gpios = <&pio 113 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&wifi_pwrseq {
+	post-power-on-delay-ms = <50>;
+
+	/* Toggle WIFI_ENABLE to reset the chip. */
+	reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+};
+
+&wifi_pins_pwrseq {
+	pins-wifi-enable {
+		pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+	};
+};
+
+&mmc1_pins_default {
+	pins-cmd-dat {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
+
+&mmc1 {
+	bt_reset: bt-reset {
+		compatible = "mediatek,mt7921s-bluetooth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_reset>;
+		reset-gpios = <&pio 120 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pio {
+	bt_pins_wakeup: bt-pins-wakeup {
+		piins-bt-wakeup {
+			pinmux = <PINMUX_GPIO42__FUNC_GPIO42>;
+			input-enable;
+		};
+	};
+
+	bt_pins_reset: bt-pins-reset {
+		pins-bt-reset {
+			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
+			output-high;
+		};
+	};
+};
+
+/delete-node/ &bluetooth;
+/delete-node/ &bt_pins;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 820260348de9..7592e3b86037 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -149,7 +149,6 @@
 		reg = <0x58>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&anx7625_pins>;
-		panel_flags = <1>;
 		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
 		vdd10-supply = <&pp1200_mipibrdg>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
index fcce8ea1232e..1ecf39458d93 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
@@ -14,6 +14,24 @@
 		     "google,kakadu", "mediatek,mt8183";
 };
 
+&i2c0 {
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&panel {
+	compatible = "boe,tv105wum-nw0";
+};
+
 &sound {
 	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
index ebfabba72507..ba74109a4909 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
@@ -13,3 +13,21 @@
 	compatible = "google,kakadu-rev3", "google,kakadu-rev2",
 			"google,kakadu", "mediatek,mt8183";
 };
+
+&i2c0 {
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&panel {
+	compatible = "boe,tv105wum-nw0";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index a06734bfaddb..736bbc0feb96 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -63,19 +63,6 @@
 
 &i2c0 {
 	status = "okay";
-
-	touchscreen: touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&open_touch>;
-
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
-
-		post-power-on-delay-ms = <10>;
-		hid-descr-addr = <0x0001>;
-	};
 };
 
 &mt6358_vcama2_reg {
@@ -384,5 +371,5 @@
 
 &panel {
 	status = "okay";
-	compatible = "boe,tv105wum-nw0";
+	/* compatible will be set in board dts */
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
new file mode 100644
index 000000000000..05361008e8ac
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google katsu board";
+	chassis-type = "tablet";
+	compatible = "google,katsu-sku32", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+	touchscreen1: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&lcd_pp3300>;
+	};
+};
+
+&panel {
+	compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KATSU";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
new file mode 100644
index 000000000000..cf008ed82878
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+/ {
+	model = "Google katsu sku38 board";
+	chassis-type = "tablet";
+	compatible = "google,katsu-sku38", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+	touchscreen1: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&lcd_pp3300>;
+	};
+};
+
+&panel {
+	compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KATSU";
+};
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index 4864c39e53a4..306c95166f3f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -48,8 +48,7 @@
 	touchscreen: touchscreen@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&touch_default>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index ffb2a44e0f41..b3ab3f8bc10f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -54,8 +54,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&open_touch>;
 
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
 
 		post-power-on-delay-ms = <10>;
 		hid-descr-addr = <0x0001>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 3c5768f674b4..ed99a4dd000b 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -846,6 +846,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &pwm0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -884,14 +888,13 @@
 	status = "okay";
 	cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&h1_int_od_l>;
-		interrupt-parent = <&pio>;
-		interrupts = <153 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&pio 153 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
@@ -918,8 +921,7 @@
 		compatible = "google,cros-ec-spi";
 		reg = <0>;
 		spi-max-frequency = <3000000>;
-		interrupt-parent = <&pio>;
-		interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 151 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ec_ap_int_odl>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index b5784a60c315..76449b4cf236 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -370,6 +370,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 976dc968b3ca..920ee415ef5f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1183,22 +1183,10 @@
 			status = "disabled";
 		};
 
-		svs: svs@1100b000 {
-			compatible = "mediatek,mt8183-svs";
-			reg = <0 0x1100b000 0 0x1000>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&infracfg CLK_INFRA_THERM>;
-			clock-names = "main";
-			nvmem-cells = <&svs_calibration>,
-				      <&thermal_calibration>;
-			nvmem-cell-names = "svs-calibration-data",
-					   "t-calibration-data";
-		};
-
 		thermal: thermal@1100b000 {
 			#thermal-sensor-cells = <1>;
 			compatible = "mediatek,mt8183-thermal";
-			reg = <0 0x1100b000 0 0x1000>;
+			reg = <0 0x1100b000 0 0xc00>;
 			clocks = <&infracfg CLK_INFRA_THERM>,
 				 <&infracfg CLK_INFRA_AUXADC>;
 			clock-names = "therm", "auxadc";
@@ -1210,6 +1198,18 @@
 			nvmem-cell-names = "calibration-data";
 		};
 
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8183-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>,
+				      <&thermal_calibration>;
+			nvmem-cell-names = "svs-calibration-data",
+					   "t-calibration-data";
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1660,7 +1660,7 @@
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
 		};
 
-		mdp3-rdma0@14001000 {
+		dma-controller0@14001000 {
 			compatible = "mediatek,mt8183-mdp3-rdma";
 			reg = <0 0x14001000 0 0x1000>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
@@ -1672,6 +1672,7 @@
 			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
 			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
 				 <&gce 21 CMDQ_THR_PRIO_LOWEST 0>;
+			#dma-cells = <1>;
 		};
 
 		mdp3-rsz0@14003000 {
@@ -1692,7 +1693,7 @@
 			clocks = <&mmsys CLK_MM_MDP_RSZ1>;
 		};
 
-		mdp3-wrot0@14005000 {
+		dma-controller@14005000 {
 			compatible = "mediatek,mt8183-mdp3-wrot";
 			reg = <0 0x14005000 0 0x1000>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
@@ -1701,6 +1702,7 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_MDP_WROT0>;
 			iommus = <&iommu M4U_PORT_MDP_WROT0>;
+			#dma-cells = <1>;
 		};
 
 		mdp3-wdma@14006000 {
@@ -1898,6 +1900,36 @@
 			#clock-cells = <1>;
 		};
 
+		vcodec_dec: video-codec@16020000 {
+			compatible = "mediatek,mt8183-vcodec-dec";
+			reg = <0 0x16020000 0 0x1000>,		/* VDEC_MISC */
+			      <0 0x16021000 0 0x800>,		/* VDEC_VLD */
+			      <0 0x16021800 0 0x800>,		/* VDEC_TOP */
+			      <0 0x16022000 0 0x1000>,		/* VDEC_MC */
+			      <0 0x16023000 0 0x1000>,		/* VDEC_AVCVLD */
+			      <0 0x16024000 0 0x1000>,		/* VDEC_AVCMV */
+			      <0 0x16025000 0 0x1000>,		/* VDEC_PP */
+			      <0 0x16026800 0 0x800>,		/* VP8_VD */
+			      <0 0x16027000 0 0x800>,		/* VP6_VD */
+			      <0 0x16027800 0 0x800>,		/* VP8_VL */
+			      <0 0x16028400 0 0x400>;		/* VP9_VD */
+			reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+				    "hwd", "hwq", "hwb", "hwg";
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PPWRAP_EXT>;
+			mediatek,scp = <&scp>;
+			mediatek,vdecsys = <&vdecsys>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_VDEC>;
+			clocks = <&vdecsys CLK_VDEC_VDEC>;
+			clock-names = "vdec";
+		};
+
 		larb1: larb@16010000 {
 			compatible = "mediatek,mt8183-smi-larb";
 			reg = <0 0x16010000 0 0x1000>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index df0c04f2ba1d..2fec6fd1c1a7 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -22,7 +22,7 @@
 
 	aliases {
 		ovl0 = &ovl0;
-		ovl_2l0 = &ovl_2l0;
+		ovl-2l0 = &ovl_2l0;
 		rdma0 = &rdma0;
 		rdma1 = &rdma1;
 	};
@@ -1160,14 +1160,14 @@
 			status = "disabled";
 		};
 
-		adsp_mailbox0: mailbox@10686000 {
+		adsp_mailbox0: mailbox@10686100 {
 			compatible = "mediatek,mt8186-adsp-mbox";
 			#mbox-cells = <0>;
 			reg = <0 0x10686100 0 0x1000>;
 			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
-		adsp_mailbox1: mailbox@10687000 {
+		adsp_mailbox1: mailbox@10687100 {
 			compatible = "mediatek,mt8186-adsp-mbox";
 			#mbox-cells = <0>;
 			reg = <0 0x10687100 0 0x1000>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8188-evb.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
new file mode 100644
index 000000000000..68a82b49f7a3
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8188.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	model = "MediaTek MT8188 evaluation board";
+	compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
+
+	aliases {
+		serial0 = &uart0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <8>;
+	hs400-ds-delay = <0x1481b>;
+	max-frequency = <200000000>;
+
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	non-removable;
+
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+
+	status = "okay";
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+	};
+};
+
+&pio {
+	adsp_uart_pins: adsp-uart-pins {
+		pins-tx-rx {
+			pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
+				 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk-ds {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>,
+				 <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins_default: nor-pins {
+		pins-io-ck {
+			pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
+				 <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
+				 <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
+			bias-pull-down;
+		};
+
+		pins-io-cs {
+			pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>,
+				 <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>,
+				 <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>;
+			bias-pull-up;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-rx-tx {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	memory-region = <&scp_mem_reserved>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&xhci2 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi
new file mode 100644
index 000000000000..b4315c9214dc
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -0,0 +1,956 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 MediaTek Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/mediatek,mt8188-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/power/mediatek,mt8188-power.h>
+
+/ {
+	compatible = "mediatek,mt8188";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x600>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x700>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <95>;
+				min-residency-us = <580>;
+			};
+
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <45>;
+				exit-latency-us = <140>;
+				min-residency-us = <740>;
+			};
+
+			cluster_off_l: cluster-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <55>;
+				exit-latency-us = <155>;
+				min-residency-us = <840>;
+			};
+
+			cluster_off_b: cluster-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <200>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-unified;
+		};
+	};
+
+	clk13m: oscillator-13m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <13000000>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clock-frequency = <13000000>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8188-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: syscon@10001000 {
+			compatible = "mediatek,mt8188-infracfg-ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8188-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8188-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11c00000 0 0x1000>,
+			      <0 0x11e10000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11ea0000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_rm", "iocfg_lt",
+				    "iocfg_lm", "iocfg_rt", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 176>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8188-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			mediatek,disable-extrst;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8188-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8188-timer", "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		pwrap: pwrap@10024000 {
+			compatible = "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap", "syscon";
+			reg = <0 0x10024000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8188-scp";
+			reg = <0 0x10500000 0 0x100000>,
+			      <0 0x10720000 0 0xe0000>;
+			reg-names = "sram", "cfg";
+			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp_audio26m: clock-controller@10b91100 {
+			compatible = "mediatek,mt8188-adsp-audio26m";
+			reg = <0 0x10b91100 0 0x100>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial@11001100 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001100 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11001200 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001200 0 0x100>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11001300 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001300 0 0x100>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart3: serial@11001400 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001400 0 0x100>;
+			interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		auxadc: adc@11002000 {
+			compatible = "mediatek,mt8188-auxadc", "mediatek,mt8173-auxadc";
+			reg = <0 0x11002000 0 0x1000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pericfg_ao: syscon@11003000 {
+			compatible = "mediatek,mt8188-pericfg-ao", "syscon";
+			reg = <0 0x11003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11018000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11019000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11019000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		xhci1: usb@11200000 {
+			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>,
+			       <&u3port1 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x468 2>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x10000>,
+			      <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>,
+				 <&infracfg_ao CLK_INFRA_AO_RG_AES_MSDCFDE_CK_0P>;
+			clock-names = "source", "hclk", "source_cg", "crypto_clk";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11eb0000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11280000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11280000 0 0x1000>,
+			      <0 0x10220080 0 0x80>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C0>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11281000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11281000 0 0x1000>,
+			      <0 0x10220180 0 0x80>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C2>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11282000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11282000 0 0x1000>,
+			      <0 0x10220280 0 0x80>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C3>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_c: clock-controller@11283000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-c";
+			reg = <0 0x11283000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		xhci2: usb@112a0000 {
+			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x112a0000 0 0x1000>,
+			      <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>,
+					  <&topckgen CLK_TOP_USB_TOP_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P3_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			status = "disabled";
+		};
+
+		xhci0: usb@112b0000 {
+			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x112b0000 0 0x1000>,
+			      <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>,
+					  <&topckgen CLK_TOP_USB_TOP_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P2_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x460 2>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		nor_flash: spi@1132c000 {
+			compatible = "mediatek,mt8188-nor", "mediatek,mt8186-nor";
+			reg = <0 0x1132c000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_SPINOR>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIFLASHCK>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>;
+			clock-names = "spi", "sf", "axi";
+			assigned-clocks = <&topckgen CLK_TOP_SPINOR>;
+			interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11e00000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e00000 0 0x1000>,
+			      <0 0x10220100 0 0x80>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C1>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11e01000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e01000 0 0x1000>,
+			      <0 0x10220380 0 0x80>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C4>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_w: clock-controller@11e02000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-w";
+			reg = <0 0x11e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		u3phy0: t-phy@11e30000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e30000 0x1000>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy1: t-phy@11e40000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e40000 0x1000>;
+			status = "disabled";
+
+			u2port1: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port1: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>,
+					 <&clk26m>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		u3phy2: t-phy@11e80000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e80000 0x1000>;
+			status = "disabled";
+
+			u2port2: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		i2c5: i2c@11ec0000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec0000 0 0x1000>,
+			      <0 0x10220480 0 0x80>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C5>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@11ec1000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec1000 0 0x1000>,
+			      <0 0x10220600 0 0x80>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C6>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_en: clock-controller@11ec2000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-en";
+			reg = <0 0x11ec2000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt8188-mfgcfg";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys0: clock-controller@14000000 {
+			compatible = "mediatek,mt8188-vppsys0";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys: clock-controller@14e00000 {
+			compatible = "mediatek,mt8188-wpesys";
+			reg = <0 0x14e00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys_vpp0: clock-controller@14e02000 {
+			compatible = "mediatek,mt8188-wpesys-vpp0";
+			reg = <0 0x14e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys1: clock-controller@14f00000 {
+			compatible = "mediatek,mt8188-vppsys1";
+			reg = <0 0x14f00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys: clock-controller@15000000 {
+			compatible = "mediatek,mt8188-imgsys";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_dip_top: clock-controller@15110000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-top";
+			reg = <0 0x15110000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_dip_nr: clock-controller@15130000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-nr";
+			reg = <0 0x15130000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe1: clock-controller@15220000 {
+			compatible = "mediatek,mt8188-imgsys-wpe1";
+			reg = <0 0x15220000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ipesys: clock-controller@15330000 {
+			compatible = "mediatek,mt8188-ipesys";
+			reg = <0 0x15330000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe2: clock-controller@15520000 {
+			compatible = "mediatek,mt8188-imgsys-wpe2";
+			reg = <0 0x15520000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe3: clock-controller@15620000 {
+			compatible = "mediatek,mt8188-imgsys-wpe3";
+			reg = <0 0x15620000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys: clock-controller@16000000 {
+			compatible = "mediatek,mt8188-camsys";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawa: clock-controller@1604f000 {
+			compatible = "mediatek,mt8188-camsys-rawa";
+			reg = <0 0x1604f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuva: clock-controller@1606f000 {
+			compatible = "mediatek,mt8188-camsys-yuva";
+			reg = <0 0x1606f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1608f000 {
+			compatible = "mediatek,mt8188-camsys-rawb";
+			reg = <0 0x1608f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuvb: clock-controller@160af000 {
+			compatible = "mediatek,mt8188-camsys-yuvb";
+			reg = <0 0x160af000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ccusys: clock-controller@17200000 {
+			compatible = "mediatek,mt8188-ccusys";
+			reg = <0 0x17200000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys_soc: clock-controller@1800f000 {
+			compatible = "mediatek,mt8188-vdecsys-soc";
+			reg = <0 0x1800f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys: clock-controller@1802f000 {
+			compatible = "mediatek,mt8188-vdecsys";
+			reg = <0 0x1802f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8188-vencsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 045b8238b38a..22b66f835e58 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -1402,7 +1402,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi5_pins>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 69f4cded5dbb..6dd32dbfb832 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -14,6 +14,8 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/mt8192-power.h>
 #include <dt-bindings/reset/mt8192-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
 
 / {
 	compatible = "mediatek,mt8192";
@@ -72,6 +74,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@100 {
@@ -90,6 +93,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@200 {
@@ -108,6 +112,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@300 {
@@ -126,6 +131,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu4: cpu@400 {
@@ -144,6 +150,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@500 {
@@ -162,6 +169,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@600 {
@@ -180,6 +188,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@700 {
@@ -198,6 +207,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu-map {
@@ -788,6 +798,29 @@
 			status = "disabled";
 		};
 
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8192-lvts-ap";
+			reg = <0 0x1100b000 0 0xc00>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8192-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>, <&lvts_e_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg MT8192_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+			reset-names = "svs_rst";
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1114,6 +1147,17 @@
 			status = "disabled";
 		};
 
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8192-lvts-mcu";
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
 		efuse: efuse@11c10000 {
 			compatible = "mediatek,mt8192-efuse", "mediatek,efuse";
 			reg = <0 0x11c10000 0 0x1000>;
@@ -1899,4 +1943,426 @@
 			power-domains = <&spm MT8192_POWER_DOMAIN_MDP>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu3_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>;
+
+			trips {
+				cpu4_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>;
+
+			trips {
+				cpu5_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>;
+
+			trips {
+				cpu6_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>;
+
+			trips {
+				cpu7_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		vpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU0>;
+
+			trips {
+				vpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU1>;
+
+			trips {
+				vpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU0>;
+
+			trips {
+				gpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU1>;
+
+			trips {
+				gpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		infra-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_INFRA>;
+
+			trips {
+				infra_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				infra_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_CAM>;
+
+			trips {
+				cam_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD0>;
+
+			trips {
+				md0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD1>;
+
+			trips {
+				md1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD2>;
+
+			trips {
+				md2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index f930b084a5db..3dfa003a980b 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -127,6 +127,77 @@
 		regulator-boot-on;
 	};
 
+	/* Murata NCP03WF104F05RL */
+	tboard_thermistor1: thermal-sensor-t1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
+	tboard_thermistor2: thermal-sensor-t2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
 	usb_vbus: regulator-5v0-usb-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb-vbus";
@@ -189,6 +260,10 @@
 	memory-region = <&afe_mem>;
 };
 
+&auxadc {
+	status = "okay";
+};
+
 &dp_intf0 {
 	status = "okay";
 
@@ -401,6 +476,14 @@
 	};
 };
 
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
 &mmc0 {
 	status = "okay";
 
@@ -471,7 +554,6 @@
 
 /* for GPU SRAM */
 &mt6359_vsram_others_ldo_reg {
-	regulator-always-on;
 	regulator-min-microvolt = <750000>;
 	regulator-max-microvolt = <750000>;
 };
@@ -1154,7 +1236,36 @@
 				regulator-enable-ramp-delay = <256>;
 				regulator-ramp-delay = <6250>;
 				regulator-allowed-modes = <0 1 2>;
-				regulator-always-on;
+			};
+		};
+	};
+};
+
+&thermal_zones {
+	soc-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&tboard_thermistor1>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pmic-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <0>;
+		thermal-sensors = <&tboard_thermistor2>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
 			};
 		};
 	};
@@ -1183,6 +1294,7 @@
 &xhci0 {
 	status = "okay";
 
+	rx-fifo-depth = <3072>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
@@ -1190,6 +1302,7 @@
 &xhci1 {
 	status = "okay";
 
+	rx-fifo-depth = <3072>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 69c7f3954ae5..4127cb84eba4 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -128,6 +128,7 @@
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
+		#interrupt-cells = <1>;
 		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "IRQB";
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index e0ac2e9f5b72..b9101662ce40 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -538,7 +538,7 @@
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8195_POWER_DOMAIN_MFG1 {
+					mfg1: power-domain@MT8195_POWER_DOMAIN_MFG1 {
 						reg = <MT8195_POWER_DOMAIN_MFG1>;
 						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
 							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
@@ -1119,7 +1119,7 @@
 
 		lvts_ap: thermal-sensor@1100b000 {
 			compatible = "mediatek,mt8195-lvts-ap";
-			reg = <0 0x1100b000 0 0x1000>;
+			reg = <0 0x1100b000 0 0xc00>;
 			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
 			resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
@@ -1128,6 +1128,18 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8195-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calib_data &lvts_efuse_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg_ao MT8195_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+			reset-names = "svs_rst";
+		};
+
 		disp_pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1686,6 +1698,9 @@
 			lvts_efuse_data2: lvts2-calib@1d0 {
 				reg = <0x1d0 0x38>;
 			};
+			svs_calib_data: svs-calib@580 {
+				reg = <0x580 0x64>;
+			};
 		};
 
 		u3phy2: t-phy@11c40000 {
@@ -1718,6 +1733,26 @@
 			};
 		};
 
+		mipi_tx0: dsi-phy@11c80000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c80000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx1: dsi-phy@11c90000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c90000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx1_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c5: i2c@11d00000 {
 			compatible = "mediatek,mt8195-i2c",
 				     "mediatek,mt8192-i2c";
@@ -1965,6 +2000,115 @@
 			#clock-cells = <1>;
 		};
 
+		dma-controller@14001000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14001000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_RDMA>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>;
+			mboxes = <&gce1 12 CMDQ_THR_PRIO_1>,
+				 <&gce1 13 CMDQ_THR_PRIO_1>,
+				 <&gce1 14 CMDQ_THR_PRIO_1>,
+				 <&gce1 21 CMDQ_THR_PRIO_1>,
+				 <&gce1 22 CMDQ_THR_PRIO_1>;
+			#dma-cells = <1>;
+		};
+
+		display@14002000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14002000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+		};
+
+		display@14003000 {
+			compatible = "mediatek,mt8195-mdp3-stitch";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_STITCH>;
+		};
+
+		display@14004000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14004000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+		};
+
+		display@14005000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14005000 0 0x1000>;
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x5000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@14006000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14006000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>;
+		};
+
+		display@14007000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14007000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+		};
+
+		display@14008000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14008000 0 0x1000>;
+			interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x8000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@14009000 {
+			compatible = "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x9000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_OVL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_OVL>;
+		};
+
+		display@1400a000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x1400a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xa000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_PADDING>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@1400b000 {
+			compatible = "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x1400b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+		};
+
+		dma-controller@1400c000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x1400c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_WROT>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			#dma-cells = <1>;
+		};
+
 		mutex@1400f000 {
 			compatible = "mediatek,mt8195-vpp-mutex";
 			reg = <0 0x1400f000 0 0x1000>;
@@ -2112,6 +2256,289 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
 		};
 
+		display@14f06000 {
+			compatible = "mediatek,mt8195-mdp3-split";
+			reg = <0 0x14f06000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x6000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_VPP_SPLIT>,
+				 <&vppsys1 CLK_VPP1_HDMI_META>,
+				 <&vppsys1 CLK_VPP1_VPP_SPLIT_HDMI>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f07000 {
+			compatible = "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x14f07000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x7000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TCC>;
+		};
+
+		dma-controller@14f08000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f08000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x8000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RDMA>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f09000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f09000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x9000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RDMA>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f0a000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f0a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xa000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RDMA>;
+			iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		display@14f0b000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xb000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_FG>;
+		};
+
+		display@14f0c000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xc000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_FG>;
+		};
+
+		display@14f0d000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0d000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xd000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_FG>;
+		};
+
+		display@14f0e000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0e000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xe000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_HDR>;
+		};
+
+		display@14f0f000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0f000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xf000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_HDR>;
+		};
+
+		display@14f10000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f10000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_HDR>;
+		};
+
+		display@14f11000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f11000 0 0x1000>;
+			interrupts = <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f12000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f12000 0 0x1000>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x2000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f13000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f13000 0 0x1000>;
+			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x3000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f14000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f14000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RSZ>;
+		};
+
+		display@14f15000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f15000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>;
+		};
+
+		display@14f16000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f16000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>;
+		};
+
+		display@14f17000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f17000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x7000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TDSHP>;
+		};
+
+		display@14f18000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f18000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x8000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_TDSHP>;
+		};
+
+		display@14f19000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f19000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x9000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_TDSHP>;
+		};
+
+		display@14f1a000 {
+			compatible = "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xa000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_MERGE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1b000 {
+			compatible = "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xb000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_MERGE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1c000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1c000 0 0x1000>;
+			interrupts = <GIC_SPI 628 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xc000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1d000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1d000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xd000 0x1000>;
+			interrupts = <GIC_SPI 629 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1e000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1e000 0 0x1000>;
+			interrupts = <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xe000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1f000 {
+			compatible = "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14f1f000 0 0x1000>;
+			interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xf000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_OVL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_OVL>;
+		};
+
+		display@14f20000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f20000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f21000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f21000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f22000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f22000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x2000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		dma-controller@14f23000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f23000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x3000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_WROT>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f24000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f24000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>,
+					<CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f25000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f25000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>,
+					<CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>;
+			iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
 		imgsys: clock-controller@15000000 {
 			compatible = "mediatek,mt8195-imgsys";
 			reg = <0 0x15000000 0 0x1000>;
@@ -2741,6 +3168,20 @@
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
 		};
 
+		dsi0: dsi@1c008000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c008000 0 0x1000>;
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI0>,
+				 <&vdosys0 CLK_VDO0_DSI0_DSI>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
 		dsc0: dsc@1c009000 {
 			compatible = "mediatek,mt8195-disp-dsc";
 			reg = <0 0x1c009000 0 0x1000>;
@@ -2750,6 +3191,20 @@
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>;
 		};
 
+		dsi1: dsi@1c012000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c012000 0 0x1000>;
+			interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI1>,
+				 <&vdosys0 CLK_VDO0_DSI1_DSI>,
+				 <&mipi_tx1>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx1>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
 		merge0: merge@1c014000 {
 			compatible = "mediatek,mt8195-disp-merge";
 			reg = <0 0x1c014000 0 0x1000>;
@@ -2873,7 +3328,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 		};
 
-		vdo1_rdma0: rdma@1c104000 {
+		vdo1_rdma0: dma-controller@1c104000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c104000 0 0x1000>;
 			interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2881,9 +3336,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma1: rdma@1c105000 {
+		vdo1_rdma1: dma-controller@1c105000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c105000 0 0x1000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2891,9 +3347,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma2: rdma@1c106000 {
+		vdo1_rdma2: dma-controller@1c106000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c106000 0 0x1000>;
 			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2901,9 +3358,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma3: rdma@1c107000 {
+		vdo1_rdma3: dma-controller@1c107000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c107000 0 0x1000>;
 			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2911,9 +3369,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma4: rdma@1c108000 {
+		vdo1_rdma4: dma-controller@1c108000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c108000 0 0x1000>;
 			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2921,9 +3380,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma5: rdma@1c109000 {
+		vdo1_rdma5: dma-controller@1c109000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c109000 0 0x1000>;
 			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2931,9 +3391,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma6: rdma@1c10a000 {
+		vdo1_rdma6: dma-controller@1c10a000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c10a000 0 0x1000>;
 			interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2941,9 +3402,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma7: rdma@1c10b000 {
+		vdo1_rdma7: dma-controller@1c10b000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c10b000 0 0x1000>;
 			interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2951,6 +3413,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+			#dma-cells = <1>;
 		};
 
 		merge1: vpp-merge@1c10c000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index 00ac59a873e8..7fc515a07c65 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -210,8 +210,7 @@
 	touchscreen@5d {
 		compatible = "goodix,gt9271";
 		reg = <0x5d>;
-		interrupt-parent = <&pio>;
-		interrupts = <132 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
 		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
 		AVDD28-supply = <&mt6360_ldo1>;
@@ -774,8 +773,7 @@
 };
 
 &pmic {
-	interrupt-parent = <&pio>;
-	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &scp {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index ea13c4a7027c..81a82933e350 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -175,7 +175,7 @@
 			status = "okay";
 
 			phy-handle = <&mgbe0_phy>;
-			phy-mode = "usxgmii";
+			phy-mode = "10gbase-r";
 
 			mdio {
 				#address-cells = <1>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 3f16595d099c..d1bd328892af 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -1459,7 +1459,7 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
 			status = "disabled";
 		};
 
@@ -1493,7 +1493,7 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBEBWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
 			status = "disabled";
 		};
 
@@ -1527,7 +1527,7 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBECWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF2>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBED>;
 			status = "disabled";
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/Makefile linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/Makefile
index d6cb840b7050..39889d5f8e12 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/Makefile
@@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-uf896.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-ufi001c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
@@ -87,8 +88,10 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-fairphone-fp5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
@@ -220,6 +223,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx203.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx206.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-boe.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-csot.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-pipa.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-microsoft-surface-duo2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-mtp.dtb
@@ -231,3 +235,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx223.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-qcp.dtb
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
index e636a1cb9b77..8460b538eb6a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -67,6 +67,18 @@
 	};
 };
 
+&usb {
+	status = "okay";
+};
+
+&usb_dwc {
+	dr_mode = "host";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
 &xo_board_clk {
 	clock-frequency = <24000000>;
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5018.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 38ffdc3cbdcd..32b178b639f0 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -5,6 +5,7 @@
  * Copyright (c) 2023 The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,apss-ipq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
 #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
@@ -36,6 +37,8 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		CPU1: cpu@1 {
@@ -44,6 +47,8 @@
 			reg = <0x1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		L2_0: l2-cache {
@@ -54,6 +59,23 @@
 		};
 	};
 
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm-ipq5018", "qcom,scm";
@@ -82,6 +104,24 @@
 		#size-cells = <2>;
 		ranges;
 
+		bootloader@4a800000 {
+			reg = <0x0 0x4a800000 0x0 0x200000>;
+			no-map;
+		};
+
+		sbl@4aa00000 {
+			reg = <0x0 0x4aa00000 0x0 0x100000>;
+			no-map;
+		};
+
+		smem@4ab00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4ab00000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
 		tz_region: tz@4ac00000 {
 			reg = <0x0 0x4ac00000 0x0 0x200000>;
 			no-map;
@@ -94,6 +134,19 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		usbphy0: phy@5b000 {
+			compatible = "qcom,ipq5018-usb-hsphy";
+			reg = <0x0005b000 0x120>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5018-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -129,6 +182,12 @@
 			#power-domain-cells = <1>;
 		};
 
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
 		sdhc_1: mmc@7804000 {
 			compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x7804000 0x1000>;
@@ -146,6 +205,16 @@
 			status = "disabled";
 		};
 
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1d000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
 		blsp1_uart1: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x078af000 0x200>;
@@ -156,6 +225,61 @@
 			status = "disabled";
 		};
 
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		usb: usb@8af8800 {
+			compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			clocks = <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			resets = <&gcc GCC_USB0_BCR>;
+
+			qcom,select-utmi-as-pipe-clk;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			usb_dwc: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x08a00000 0xe000>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phy-names = "usb2-phy";
+				phys = <&usbphy0>;
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,  /* GICD */
@@ -189,6 +313,24 @@
 			clocks = <&sleep_clk>;
 		};
 
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq5018-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a53pll>, <&xo_board_clk>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
+			#mbox-cells = <1>;
+		};
+
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq5018-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board_clk>;
+			clock-names = "xo";
+		};
+
 		timer@b120000 {
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0b120000 0x1000>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
index 4870cdb764d0..b37ae7749083 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
@@ -9,6 +9,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "ipq5332.dtsi"
 
 / {
@@ -39,6 +40,8 @@
 		pinctrl-names = "default";
 
 		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
 			gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tx";
 			default-state = "off";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
index e89e2e948603..846413817e9a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
index efd480a7afdf..ed8a54eb95c0 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
index eb1fa33d6fe4..d5f99e741ae5 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index d3fef2f80a81..42e2e48b2bc3 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -91,11 +91,19 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
 
-		opp-1488000000 {
-			opp-hz = /bits/ 64 <1488000000>;
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -163,6 +171,11 @@
 			reg = <0x000a4000 0x721>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@1d {
+				reg = <0x1d 0x2>;
+				bits = <7 2>;
+			};
 		};
 
 		rng: rng@e3000 {
@@ -390,8 +403,8 @@
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo_board>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo_board>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index e59b9df96c7e..61c8fd49c966 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -96,42 +96,49 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&cpu_speed_bin>;
 		opp-shared;
 
 		opp-864000000 {
 			opp-hz = /bits/ 64 <864000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1320000000 {
 			opp-hz = /bits/ 64 <1320000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1608000000 {
 			opp-hz = /bits/ 64 <1608000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -236,31 +243,26 @@
 
 		ssphy_0: ssphy@78000 {
 			compatible = "qcom,ipq6018-qmp-usb3-phy";
-			reg = <0x0 0x00078000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x00078000 0x0 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "gcc_usb0_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
-				      <0x0 0x00078400 0x0 0x200>, /* Rx */
-				      <0x0 0x00078800 0x0 0x1f8>, /* PCS */
-				      <0x0 0x00078600 0x0 0x044>; /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "gcc_usb0_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: qusb@79000 {
@@ -314,6 +316,11 @@
 			reg = <0x0 0x000a4000 0x0 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@135 {
+				reg = <0x135 0x1>;
+				bits = <7 1>;
+			};
 		};
 
 		prng: qrng@e3000 {
@@ -439,6 +446,26 @@
 			qcom,ee = <0>;
 		};
 
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78af000 0x0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b0000 0x0 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart3: serial@78b1000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x0 0x078b1000 0x0 0x200>;
@@ -449,6 +476,36 @@
 			status = "disabled";
 		};
 
+		blsp1_uart4: serial@78b2000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b2000 0x0 0x200>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart5: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b3000 0x0 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart6: serial@78b4000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b4000 0x0 0x200>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_spi1: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
@@ -477,6 +534,20 @@
 			status = "disabled";
 		};
 
+		blsp1_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b9000 0x0 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c2: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
@@ -557,7 +628,7 @@
 					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 			assigned-clock-rates = <133330000>,
 					       <133330000>,
-					       <20000000>;
+					       <24000000>;
 
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
@@ -566,7 +637,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x0 0x08a00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				clocks = <&xo>;
 				clock-names = "ref";
@@ -611,8 +682,8 @@
 			compatible = "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0 0x0b111000 0x0 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
@@ -731,7 +802,7 @@
 			};
 		};
 
-		pcie0: pci@20000000 {
+		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq6018";
 			reg = <0x0 0x20000000 0x0 0xf1d>,
 			      <0x0 0x20000f20 0x0 0xa8>,
@@ -759,10 +830,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2f275c84e566..26441447c866 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -125,32 +125,26 @@
 
 		ssphy_1: phy@58000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00058000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00058000 0x1000>;
 
 			clocks = <&gcc GCC_USB1_AUX_CLK>,
-				<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB1_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_1_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB1_PHY_BCR>,
-				<&gcc GCC_USB3PHY_1_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_1_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@58200 {
-				reg = <0x00058200 0x130>,     /* Tx */
-				      <0x00058400 0x200>,     /* Rx */
-				      <0x00058800 0x1f8>,     /* PCS */
-				      <0x00058600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB1_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_1_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_1: phy@59000 {
@@ -168,32 +162,26 @@
 
 		ssphy_0: phy@78000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00078000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00078000 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_0_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
-				<&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x00078200 0x130>,     /* Tx */
-				      <0x00078400 0x200>,     /* Rx */
-				      <0x00078800 0x1f8>,     /* PCS */
-				      <0x00078600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_0_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: phy@79000 {
@@ -369,8 +357,14 @@
 		gcc: gcc@1800000 {
 			compatible = "qcom,gcc-ipq8074";
 			reg = <0x01800000 0x80000>;
-			clocks = <&xo>, <&sleep_clk>;
-			clock-names = "xo", "sleep_clk";
+			clocks = <&xo>,
+				 <&sleep_clk>,
+				 <&pcie_qmp0>,
+				 <&pcie_qmp1>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "pcie0_pipe",
+				      "pcie1_pipe";
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
@@ -406,7 +400,7 @@
 		};
 
 		sdhc_1: mmc@7824900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,ipq8074-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x500>, <0x7824000 0x800>;
 			reg-names = "hc", "core";
 
@@ -523,6 +517,20 @@
 			status = "disabled";
 		};
 
+		blsp1_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 18>, <&blsp_dma 19>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c5: i2c@78b9000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
@@ -628,7 +636,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
@@ -670,7 +678,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x8c00000 0xcd00>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_1>, <&usb1_ssphy>;
+				phys = <&qusb_phy_1>, <&ssphy_1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
@@ -708,8 +716,8 @@
 			compatible = "qcom,ipq8074-apcs-apps-global",
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 
 			#clock-cells = <1>;
 			#mbox-cells = <1>;
@@ -781,7 +789,7 @@
 			};
 		};
 
-		pcie1: pci@10000000 {
+		pcie1: pcie@10000000 {
 			compatible = "qcom,pcie-ipq8074";
 			reg = <0x10000000 0xf1d>,
 			      <0x10000f20 0xa8>,
@@ -806,13 +814,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142
+			interrupt-map = <0 0 0 1 &intc 0 0 142
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143
+					<0 0 0 2 &intc 0 0 143
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144
+					<0 0 0 3 &intc 0 0 144
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145
+					<0 0 0 4 &intc 0 0 145
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -842,7 +850,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pci@20000000 {
+		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq8074-gen3";
 			reg = <0x20000000 0xf1d>,
 			      <0x20000f20 0xa8>,
@@ -868,13 +876,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75
+			interrupt-map = <0 0 0 1 &intc 0 0 75
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78
+					<0 0 0 2 &intc 0 0 78
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79
+					<0 0 0 3 &intc 0 0 79
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83
+					<0 0 0 4 &intc 0 0 83
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
new file mode 100644
index 000000000000..91e104b0f865
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP board common device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq9574.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulator_fixed_3p3: s3300 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_3p3";
+	};
+
+	regulator_fixed_0p925: s0925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_0p925";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+
+		mp5496_l2: l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_qmpphy {
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-supply = <&regulator_fixed_0p925>;
+
+	status = "okay";
+};
+
+&usb_0_qusbphy {
+	vdd-supply = <&regulator_fixed_0p925>;
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
index 2b093e02637b..f4f9199d4ab1 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
@@ -8,58 +8,12 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2";
 	compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
 };
 
 &sdhc_1 {
@@ -74,10 +28,6 @@
 	status = "okay";
 };
 
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
 &tlmm {
 	sdc_default_state: sdc-default-state {
 		clk-pins {
@@ -110,15 +60,4 @@
 			bias-pull-down;
 		};
 	};
-
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 877026ccc6e2..1bb8d96c9a82 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -8,69 +8,11 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
 	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	regulator_fixed_3p3: s3300 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-name = "fixed_3p3";
-	};
-
-	regulator_fixed_0p925: s0925 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <925000>;
-		regulator-max-microvolt = <925000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-name = "fixed_0p925";
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-
-		mp5496_l2: l2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
 };
 
 &sdhc_1 {
@@ -85,10 +27,6 @@
 	status = "okay";
 };
 
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
 &tlmm {
 	sdc_default_state: sdc-default-state {
 		clk-pins {
@@ -122,30 +60,3 @@
 		};
 	};
 };
-
-&usb_0_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_0_qmpphy {
-	vdda-pll-supply = <&mp5496_l2>;
-	vdda-phy-supply = <&regulator_fixed_0p925>;
-
-	status = "okay";
-};
-
-&usb_0_qusbphy {
-	vdd-supply = <&regulator_fixed_0p925>;
-	vdda-pll-supply = <&mp5496_l2>;
-	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
-
-	status = "okay";
-};
-
-&usb3 {
-	status = "okay";
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
-};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
index c8fa54e1a62c..d36d1078763e 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
@@ -8,73 +8,10 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6";
 	compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
index f01de6628c3b..c30c9fbedf26 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
@@ -8,73 +8,10 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8";
 	compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
index 6efae3426cb8..0dc382f5d5ec 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
@@ -8,73 +8,9 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9";
 	compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 8a72ad4afd03..5f83ee42a719 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -106,42 +106,56 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
 
 		opp-936000000 {
 			opp-hz = /bits/ 64 <936000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1104000000 {
 			opp-hz = /bits/ 64 <1104000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <862500>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1416000000 {
 			opp-hz = /bits/ 64 <1416000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1488000000 {
 			opp-hz = /bits/ 64 <1488000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x5>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-2208000000 {
 			opp-hz = /bits/ 64 <2208000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -223,6 +237,11 @@
 			reg = <0x000a4000 0x5a1>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@15 {
+				reg = <0x15 0x2>;
+				bits = <7 2>;
+			};
 		};
 
 		cryptobam: dma-controller@704000 {
@@ -652,8 +671,8 @@
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a73pll>, <&xo_board_clk>;
-			clock-names = "pll", "xo";
+			clocks = <&a73pll>, <&xo_board_clk>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
index 57a74eea1005..b32c7a97394d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 /*
  * NOTE: The original firmware from Acer can only boot 32-bit kernels.
@@ -83,6 +84,29 @@
 	};
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index aa4c1ab1e673..3459145516a1 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -22,6 +24,19 @@
 		stdout-path = "serial0";
 	};
 
+	reserved-memory {
+		/delete-node/ reserved@86680000;
+		/delete-node/ rmtfs@86700000;
+
+		rmtfs: rmtfs@86680000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x86680000 0x0 0x160000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -50,6 +65,17 @@
 		};
 	};
 
+	reg_headphones_avdd: regulator-headphones-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "headphones_avdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&headphones_avdd_default>;
+		pinctrl-names = "default";
+	};
+
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
 		id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
@@ -58,8 +84,41 @@
 	};
 };
 
-&blsp_uart2 {
+&blsp_i2c3 {
 	status = "okay";
+
+	headphones: audio-codec@10 {
+		compatible = "asahi-kasei,ak4375";
+		reg = <0x10>;
+		avdd-supply = <&reg_headphones_avdd>;
+		tvdd-supply = <&pm8916_l6>;
+		pdn-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&headphones_pdn_default>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <0>;
+	};
+
+	speaker_codec_top: audio-codec@34 {
+		compatible = "nxp,tfa9897";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l6>;
+		rcv-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&speaker_top_default>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Top";
+		#sound-dai-cells = <0>;
+	};
+
+	speaker_codec_bottom: audio-codec@36 {
+		compatible = "nxp,tfa9897";
+		reg = <0x36>;
+		vddd-supply = <&pm8916_l6>;
+		rcv-gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&speaker_bottom_default>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Bottom";
+		#sound-dai-cells = <0>;
+	};
 };
 
 &blsp_i2c4 {
@@ -153,6 +212,22 @@
 	};
 };
 
+&blsp_uart2 {
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -169,6 +244,17 @@
 	status = "okay";
 };
 
+&q6afedai {
+	dai@18 {
+		reg = <SECONDARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -183,6 +269,54 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	/* Add pin switches for speakers to allow disabling them individually */
+	model = "alcatel-idol3";
+	widgets =
+		"Speaker", "Speaker Top",
+		"Speaker", "Speaker Bottom";
+	pin-switches = "Speaker Top", "Speaker Bottom";
+	audio-routing =
+		"Speaker Top", "Speaker Top OUT",
+		"Speaker Bottom", "Speaker Bottom OUT",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &pri_mi2s_default &pri_mi2s_ws_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &pri_mi2s_sleep &pri_mi2s_ws_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>;
+		};
+	};
+};
+
+&sound_link_backend0 {
+	/* Primary MI2S is not used, replace with Secondary MI2S for headphones */
+	link-name = "Secondary MI2S";
+
+	cpu {
+		sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
+	};
+	platform {
+		sound-dai = <&q6routing>;
+	};
+	codec {
+		sound-dai = <&headphones>;
+	};
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -212,6 +346,15 @@
 	status = "okay";
 };
 
+/* Only some of the pins are used */
+&pri_mi2s_default {
+	pins = "gpio113", "gpio115";
+};
+
+&pri_mi2s_sleep {
+	pins = "gpio113", "gpio115";
+};
+
 &tlmm {
 	accel_int_default: accel-int-default-state {
 		pins = "gpio31";
@@ -245,6 +388,20 @@
 		bias-disable;
 	};
 
+	headphones_avdd_default: headphones-avdd-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	headphones_pdn_default: headphones-pdn-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	/*
 	 * The OEM wired an additional GPIO to be asserted so that
 	 * the si-en,sn3190 LED IC works. Since this GPIO is not
@@ -291,6 +448,20 @@
 		bias-disable;
 	};
 
+	speaker_bottom_default: speaker-bottom-default-state {
+		pins = "gpio111";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	speaker_top_default: speaker-top-default-state {
+		pins = "gpio50";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	ts_int_reset_default: ts-int-reset-default-state {
 		pins = "gpio13", "gpio100";
 		function = "gpio";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index a8be6ff66893..77618c7374df 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -130,6 +132,18 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,micbias1-ext-cap;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_rpm_regulators {
 	pm8916_l17: l17 {
 		regulator-min-microvolt = <2850000>;
@@ -151,6 +165,13 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 47d1c5cb13f4..3a3e794c022f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -25,17 +27,45 @@
 
 	/*
 	 * For some reason, the signed wcnss firmware is not relocatable.
-	 * It must be loaded at 0x8b600000. All other firmware is relocatable,
-	 * so place wcnss at the fixed address and then all other firmware
-	 * regions will be automatically allocated at a fitting place.
+	 * It must be loaded at 0x8b600000. Unfortunately, this also means that
+	 * mpss_mem does not fit when loaded to the typical address at 0x86800000.
+	 *
+	 * Load wcnss_mem to the fixed address and relocate mpss_mem to the next
+	 * working higher address. For some reason the modem firmware does not
+	 * boot when placed at 0x8a800000 to 0x8e800000.
 	 */
 	reserved-memory {
+		/delete-node/ mpss@86800000;
 		/delete-node/ wcnss;
 
 		wcnss_mem: wcnss@8b600000 {
 			reg = <0x0 0x8b600000 0x0 0x600000>;
 			no-map;
 		};
+
+		mpss_mem: mpss@8e800000 {
+			reg = <0x0 0x8e800000 0x0 0x5000000>;
+			no-map;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+		energy-full-design-microwatt-hours = <9500000>;
+		charge-full-design-microamp-hours = <2500000>;
+
+		ocv-capacity-celsius = <25>;
+		ocv-capacity-table-0 = <4330000 100>, <4265000 95>,
+			<4208000 90>, <4153000 85>, <4100000 80>, <4049000 75>,
+			<4001000 70>, <3962000 65>, <3919000 60>, <3872000 55>,
+			<3839000 50>, <3817000 45>, <3798000 40>, <3783000 35>,
+			<3767000 30>, <3747000 25>, <3729000 20>, <3709000 16>,
+			<3688000 13>, <3681000 11>, <3680000 10>, <3679000 9>,
+			<3677000 8>, <3674000 7>, <3666000 6>, <3641000 5>,
+			<3597000 4>, <3537000 3>, <3457000 2>, <3336000 1>,
+			<3000000 0>;
 	};
 
 	gpio-keys {
@@ -93,6 +123,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
 
 		led@0 {
 			reg = <0>;
@@ -225,6 +256,29 @@
 	status = "okay";
 };
 
+&pm8916_bms {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+	power-supplies = <&pm8916_charger>;
+};
+
+&pm8916_charger {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+
+	qcom,fast-charge-safe-current = <900000>;
+	qcom,fast-charge-safe-voltage = <4300000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -237,10 +291,6 @@
 	};
 };
 
-&pm8916_usbin {
-	status = "okay";
-};
-
 &pm8916_vib {
 	status = "okay";
 };
@@ -254,14 +304,21 @@
 	non-removable;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS Internal1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS Internal3";
+};
+
 &usb {
 	status = "okay";
 	dr_mode = "peripheral";
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
 };
 
 &usb_hs_phy {
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
 };
 
 &venus {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index 41cadb906b98..3b7fdb6797a9 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -3,9 +3,12 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "BQ Aquaris X5 (Longcheer L8910)";
@@ -22,6 +25,16 @@
 		stdout-path = "serial0";
 	};
 
+	speaker_amp: audio-amplifier {
+		compatible = "awinic,aw8738";
+		mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		awinic,mode = <5>;
+		sound-name-prefix = "Speaker Amp";
+
+		pinctrl-0 = <&spk_ext_pa_default>;
+		pinctrl-names = "default";
+	};
+
 	flash-led-controller {
 		compatible = "ocs,ocp8110";
 		enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
@@ -74,6 +87,46 @@
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&status_led_default>;
+		pinctrl-names = "default";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
 &blsp_i2c3 {
 	status = "okay";
 
@@ -107,6 +160,27 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_gpios {
+	status_led_default: status-led-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		bias-disable;
+		output-high;
+	};
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -137,6 +211,28 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	/*
+	 * Provide widgets/pin-switches to allow enabling speaker separately.
+	 * The hardware does not provide a way to disable the output via the
+	 * headphone jack when the speaker is enabled.
+	 */
+	model = "bq-paella";
+	widgets =
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+	pin-switches = "Speaker";
+	audio-routing =
+		"Speaker", "Speaker Amp OUT",
+		"Speaker Amp IN", "HPH_R",
+		"Headphones", "HPH_L",
+		"Headphones", "HPH_R",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+	aux-devs = <&speaker_amp>;
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -205,6 +301,13 @@
 		bias-disable;
 	};
 
+	spk_ext_pa_default: spk-ext-pa-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
new file mode 100644
index 000000000000..039961622633
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * msm8916-modem-qdsp6.dtsi describes the typical modem setup on MSM8916 devices
+ * (or similar SoCs) with audio routed via the QDSP6 services provided by the
+ * modem firmware. The digital/analog codec in the SoC/PMIC is used by default,
+ * but boards can define additional codecs by adding additional backend DAI links.
+ */
+
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+&apr {
+	status = "okay";
+};
+
+&bam_dmux {
+	status = "okay";
+};
+
+&bam_dmux_dma {
+	status = "okay";
+};
+
+&lpass {
+	status = "reserved"; /* Controlled by QDSP6 */
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&mba_mem {
+	status = "okay";
+};
+
+&mpss {
+	status = "okay";
+};
+
+&mpss_mem {
+	status = "okay";
+};
+
+&pm8916_codec {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <0 1>;
+	};
+	dai@20 {
+		reg = <TERTIARY_MI2S_TX>;
+		qcom,sd-lines = <0 1>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@1 {
+		reg = <1>;
+		direction = <Q6ASM_DAI_TX>;
+	};
+	dai@2 {
+		reg = <2>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@3 {
+		reg = <3>;
+		direction = <Q6ASM_DAI_RX>;
+		is-compress-dai;
+	};
+};
+
+&sound {
+	compatible = "qcom,msm8916-qdsp6-sndcard";
+	model = "msm8916";
+
+	pinctrl-0 = <&cdc_pdm_default>;
+	pinctrl-1 = <&cdc_pdm_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	frontend0-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	frontend1-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	frontend2-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	frontend3-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	sound_link_backend0: backend0-dai-link {
+		link-name = "Primary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	sound_link_backend1: backend1-dai-link {
+		link-name = "Tertiary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai TERTIARY_MI2S_TX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 0b29132b74e1..2937495940ea 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -1,10 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -196,6 +199,18 @@
 	};
 };
 
+&blsp_i2c1 {
+	status = "okay";
+
+	speaker_codec: audio-codec@34 {
+		compatible = "nxp,tfa9895";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l5>;
+		sound-name-prefix = "Speaker";
+		#sound-dai-cells = <0>;
+	};
+};
+
 &blsp_i2c2 {
 	status = "okay";
 
@@ -243,6 +258,25 @@
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
 &mdss {
 	status = "okay";
 };
@@ -253,6 +287,10 @@
 	pinctrl-1 = <&mdss_sleep>;
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -265,6 +303,13 @@
 	};
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -279,6 +324,32 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	model = "samsung-a2015";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	status = "okay";
 	extcon = <&muic>, <&muic>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index f5a808369518..3b934f5eba47 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -49,11 +49,6 @@
 	};
 };
 
-&touchkey {
-	vcc-supply = <&reg_touch_key>;
-	vdd-supply = <&reg_key_led>;
-};
-
 &accelerometer {
 	mount-matrix = "0", "1", "0",
 		       "1", "0", "0",
@@ -108,6 +103,11 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_key_led>;
+};
+
 &vibrator {
 	status = "okay";
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
index 0824ab041d80..3c49dac92d2d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
@@ -65,6 +65,10 @@
 	};
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
 &reg_motor_vdd {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
index 3f145dde4059..5882b3a593b8 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
@@ -49,6 +49,10 @@
 	status = "disabled";
 };
 
+&sound {
+	model = "samsung-gmax"; /* No secondary microphone */
+};
+
 &tlmm {
 	gpio_leds_default: gpio-led-default-state {
 		pins = "gpio60";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
index c19cf20d7427..fbd2caf405d5 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
@@ -3,9 +3,12 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -65,25 +68,6 @@
 	};
 };
 
-&blsp_i2c4 {
-	status = "okay";
-
-	fuelgauge@36 {
-		compatible = "maxim,max77849-battery";
-		reg = <0x36>;
-
-		maxim,rsns-microohm = <10000>;
-		maxim,over-heat-temp = <600>;
-		maxim,over-volt = <4400>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
-
-		pinctrl-0 = <&fuelgauge_int_default>;
-		pinctrl-names = "default";
-	};
-};
-
 &blsp_i2c2 {
 	status = "okay";
 
@@ -112,10 +96,52 @@
 	};
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77849-battery";
+		reg = <0x36>;
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,over-volt = <4400>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fuelgauge_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
 &blsp_uart2 {
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -133,6 +159,13 @@
 	status = "okay";
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -147,6 +180,27 @@
 	status = "okay";
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	dr_mode = "peripheral";
 	extcon = <&pm8916_usbin>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
index 75c4854ecd64..5b34529b816c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
@@ -9,6 +9,14 @@
 	compatible = "samsung,gt510", "qcom,msm8916";
 	chassis-type = "tablet";
 
+	speaker_codec: audio-codec {
+		compatible = "maxim,max98357a";
+		sdmode-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+		pinctrl-0 = <&audio_sdmode_default>;
+		pinctrl-names = "default";
+	};
+
 	clk_pwm: pwm {
 		compatible = "clk-pwm";
 		#pwm-cells = <2>;
@@ -112,6 +120,10 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -142,7 +154,21 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&sound {
+	model = "samsung-gt510";
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
 &tlmm {
+	audio_sdmode_default: audio-sdmode-default-state {
+		pins = "gpio55";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	buckbooster_en_default: buckbooster-en-default-state {
 		pins = "gpio51";
 		function = "gpio";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
index 11359bcc27b3..579312ed53ce 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
@@ -35,6 +35,26 @@
 		pinctrl-names = "default";
 	};
 
+	i2c-amplifier {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 55 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 56 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&amp_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		speaker_codec: audio-codec@34 {
+			compatible = "nxp,tfa9895";
+			reg = <0x34>;
+			vddd-supply = <&pm8916_l5>;
+			sound-name-prefix = "Speaker";
+			#sound-dai-cells = <0>;
+		};
+	};
+
 	vibrator {
 		compatible = "gpio-vibrator";
 		enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
@@ -64,6 +84,10 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -94,7 +118,21 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&sound {
+	model = "samsung-a2015";
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &secondary_mic_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &secondary_mic_default>;
+	pinctrl-names = "default", "sleep";
+};
+
 &tlmm {
+	amp_i2c_default: amp-i2c-default-state {
+		pins = "gpio55", "gpio56";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	buckbooster_en_default: buckbooster-en-default-state {
 		pins = "gpio8";
 		function = "gpio";
@@ -123,6 +161,14 @@
 		bias-disable;
 	};
 
+	secondary_mic_default: secondary-mic-default-state {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
 	tsp_int_default: tsp-int-default-state {
 		pins = "gpio13";
 		function = "gpio";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
index fe59be3505fe..5ca2ada266f4 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -135,6 +137,10 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -154,6 +160,14 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	model = "msm8916-1mic";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	extcon = <&muic>, <&muic>;
 	status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
index 58c2f5a70e78..ba8650971d6a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
@@ -19,6 +19,10 @@
 	status = "disabled";
 };
 
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+};
+
 &touchscreen {
 	/* FIXME: Missing sm5703-mfd driver to power up vdd-supply */
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index 68da2a2d3077..5ce8f1350abc 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -319,6 +321,10 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -350,6 +356,13 @@
 	no-1-8-v;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	status = "okay";
 	extcon = <&muic>, <&muic>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
index 6fe1850ba20e..f34997500891 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 };
 
-&led_r {
-	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
 };
 
 &button_default {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
index 16d4a91022be..6cb3911ba1c9 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 };
 
-&led_r {
-	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
 };
 
 &mpss {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index 419f35c1fc92..510b3b3c4e3c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -25,6 +27,28 @@
 		stdout-path = "serial0";
 	};
 
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amp";
+		pinctrl-0 = <&speaker_amp_default>;
+		pinctrl-names = "default";
+	};
+
+	/*
+	 * This seems to be actually an analog switch that either routes audio
+	 * to the headphone jack or nowhere. Given that we need to enable a GPIO
+	 * to get sound on headphones, modelling it as simple-audio-amplifier
+	 * works just fine.
+	 */
+	headphones_switch: audio-switch {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Headphones Switch";
+		pinctrl-0 = <&headphones_switch_default>;
+		pinctrl-names = "default";
+	};
+
 	flash-led-controller {
 		compatible = "ocs,ocp8110";
 		enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
@@ -118,6 +142,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l16>;
+		vio-supply = <&pm8916_l5>;
 
 		led@0 {
 			reg = <0>;
@@ -146,6 +171,18 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5100000>;
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -180,6 +217,30 @@
 	non-removable;
 };
 
+&sound {
+	/*
+	 * Provide widgets/pin-switches to allow enabling speaker and headphones
+	 * separately. Both are routed via the HPH_L/HPH_R pins of the codec.
+	 */
+	model = "wt88047";
+	widgets =
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+	pin-switches = "Speaker", "Headphones";
+	audio-routing =
+		"Speaker", "Speaker Amp OUTL",
+		"Speaker", "Speaker Amp OUTR",
+		"Speaker Amp INL", "HPH_R",
+		"Speaker Amp INR", "HPH_R",
+		"Headphones", "Headphones Switch OUTL",
+		"Headphones", "Headphones Switch OUTR",
+		"Headphones Switch INL", "HPH_L",
+		"Headphones Switch INR", "HPH_R",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2";
+	aux-devs = <&speaker_amp>, <&headphones_switch>;
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -226,6 +287,13 @@
 		bias-pull-up;
 	};
 
+	headphones_switch_default: headphones-switch-default-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	imu_default: imu-default-state {
 		pins = "gpio115";
 		function = "gpio";
@@ -234,6 +302,13 @@
 		bias-disable;
 	};
 
+	speaker_amp_default: speaker-amp-default-state {
+		pins = "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	touchscreen_default: touchscreen-default-state {
 		touchscreen-pins {
 			pins = "gpio13";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
index 5e6ba8c58bb5..a98efcfe78b7 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
 };
 
-&led_r {
-	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
 };
 
 &button_default {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 4f799b536a92..e423c57ddd41 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -539,9 +540,6 @@
 			compatible = "qcom,msm8916-bimc";
 			reg = <0x00400000 0x62000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -574,18 +572,12 @@
 			compatible = "qcom,msm8916-pcnoc";
 			reg = <0x00500000 0x11000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8916-snoc";
 			reg = <0x00580000 0x14000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		stm: stm@802000 {
@@ -1989,6 +1981,54 @@
 
 				label = "hexagon";
 
+				apr: apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					q6core: service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
 				fastrpc {
 					compatible = "qcom,fastrpc";
 					qcom,smd-channels = "fastrpcsmd-apps-dsp";
@@ -2106,6 +2146,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
new file mode 100644
index 000000000000..3cec51891aed
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Huawei Honor 5X / GR5 (2016)";
+	compatible = "huawei,kiwi", "qcom,msm8939";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1600000>;
+			no-map;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@1e {
+		compatible = "kionix,kx023-1025";
+		reg = <0x1e>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+		mount-matrix = "-1", "0", "0",
+			       "0", "1", "0",
+			       "0", "0", "1";
+	};
+
+	proximity@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		led-max-microamp = <25000>;
+		amstaos,proximity-diodes = <0>;
+
+		pinctrl-0 = <&prox_irq_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@1c {
+		compatible = "cypress,tt21000";
+
+		reg = <0x1c>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		/*
+		 * NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a
+		 * fixed regulator that is automatically enabled by pm8916_l16.
+		 */
+		vdd-supply = <&pm8916_l16>;
+		vddio-supply = <&pm8916_l16>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_l8 {
+	regulator-min-microvolt = <2950000>;
+	regulator-max-microvolt = <2950000>;
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	prox_irq_default: prox-irq-default-state {
+		pins = "gpio113";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		pins = "gpio12", "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
index 6802714fda3f..e3404c4455cf 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
@@ -8,6 +8,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 
 / {
@@ -120,6 +121,46 @@
 
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&status_led_default>;
+		pinctrl-names = "default";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
 &blsp_i2c3 {
 	status = "okay";
 
@@ -139,6 +180,7 @@
 	light-sensor@23 {
 		compatible = "liteon,ltr559";
 		reg = <0x23>;
+		proximity-near-level = <75>;
 
 		vdd-supply = <&pm8916_l17>;
 		vddio-supply = <&pm8916_l5>;
@@ -184,6 +226,16 @@
 	status = "okay";
 };
 
+&pm8916_gpios {
+	status_led_default: status-led-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		bias-disable;
+		output-high;
+	};
+};
+
 &pm8916_mpps {
 	pwm_out: mpp4-state {
 		pins = "mpp4";
@@ -247,6 +299,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	button_backlight_default: button-backlight-default-state {
 		pins = "gpio17";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
index fccd8fec8b8f..aa6c39482a2f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
@@ -3,10 +3,12 @@
 /dts-v1/;
 
 #include "msm8939-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	model = "Samsung Galaxy A7 (2015)";
@@ -287,6 +289,18 @@
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	speaker_codec: audio-codec@34 {
+		compatible = "nxp,tfa9895";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l5>;
+		sound-name-prefix = "Speaker";
+		#sound-dai-cells = <0>;
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -309,6 +323,29 @@
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -321,6 +358,13 @@
 	};
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -335,6 +379,32 @@
 	status = "okay";
 };
 
+&sound {
+	model = "samsung-a2015";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	extcon = <&muic>, <&muic>;
 	status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 324b5d26db40..82d85ff61045 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8939.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -601,9 +602,6 @@
 		bimc: interconnect@400000 {
 			compatible = "qcom,msm8939-bimc";
 			reg = <0x00400000 0x62000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
@@ -647,25 +645,16 @@
 		pcnoc: interconnect@500000 {
 			compatible = "qcom,msm8939-pcnoc";
 			reg = <0x00500000 0x11000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8939-snoc";
 			reg = <0x00580000 0x14080>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 			#interconnect-cells = <1>;
 
 			snoc_mm: interconnect-snoc {
 				compatible = "qcom,msm8939-snoc-mm";
-				clock-names = "bus", "bus_a";
-				clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>,
-					 <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>;
 				#interconnect-cells = <1>;
 			};
 		};
@@ -1537,6 +1526,20 @@
 			#interrupt-cells = <4>;
 		};
 
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,msm8916-mss-pil";
 			reg = <0x04080000 0x100>, <0x04020000 0x040>;
@@ -1569,6 +1572,22 @@
 			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
 			status = "disabled";
 
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&hexagon_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
 			mba {
 				memory-region = <&mba_mem>;
 			};
@@ -1585,6 +1604,54 @@
 				qcom,remote-pid = <1>;
 
 				label = "hexagon";
+
+				apr: apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					q6core: service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
 			};
 		};
 
@@ -1682,6 +1749,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {
@@ -2116,6 +2184,8 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			/* Necessary because firmware does not configure this correctly */
+			clock-frequency = <19200000>;
 
 			frame@b121000 {
 				reg = <0x0b121000 0x1000>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
index ed95d09cedb1..6b9245cd8b0c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
@@ -111,6 +111,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
index 61ff629c9bf3..9ac4f507e321 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
@@ -104,6 +104,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
index 1a1d3f92a511..b0588f30f8f1 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
@@ -113,6 +113,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi
index e7de7632669a..ad2f8cf9c966 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -174,10 +174,10 @@
 		};
 	};
 
-	memory {
+	memory@10000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
+		reg = <0 0x10000000 0 0>;
 	};
 
 	pmu {
@@ -726,6 +726,48 @@
 				bias-disable;
 			};
 
+			spi_3_default: spi-3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_spi3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_3_sleep: spi-3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_5_default: spi-5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_spi5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_5_sleep: spi-5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_6_default: spi-6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_spi6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_6_sleep: spi-6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			wcnss_pin_a: wcnss-active-state {
 
 				wcss-wlan2-pins {
@@ -1004,7 +1046,7 @@
 
 		apps_iommu: iommu@1e20000 {
 			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
-			ranges  = <0 0x01e20000 0x20000>;
+			ranges = <0 0x01e20000 0x20000>;
 
 			clocks = <&gcc GCC_SMMU_CFG_CLK>,
 				 <&gcc GCC_APSS_TCU_ASYNC_CLK>;
@@ -1360,6 +1402,26 @@
 			status = "disabled";
 		};
 
+		spi_3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_3_default>;
+			pinctrl-1 = <&spi_3_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_4: i2c@78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b8000 0x600>;
@@ -1413,6 +1475,26 @@
 			status = "disabled";
 		};
 
+		spi_5: spi@7af5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				<&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_5_default>;
+			pinctrl-1 = <&spi_5_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_6: i2c@7af6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af6000 0x600>;
@@ -1433,6 +1515,26 @@
 			status = "disabled";
 		};
 
+		spi_6: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_6_default>;
+			pinctrl-1 = <&spi_6_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_7: i2c@7af7000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af7000 0x600>;
@@ -1645,7 +1747,7 @@
 				apr {
 					compatible = "qcom,apr-v2";
 					qcom,smd-channels = "apr_audio_svc";
-					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					qcom,domain = <APR_DOMAIN_ADSP>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 6ba9da9e6a8b..ee6f87c828ae 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -444,6 +444,19 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	etm {
+		compatible = "qcom,coresight-remote-etm";
+
+		out-ports {
+			port {
+				modem_etm_out_funnel_in2: endpoint {
+					remote-endpoint =
+					  <&funnel_in2_in_modem_etm>;
+				};
+			};
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -779,10 +792,10 @@
 				 <&pciephy_0>,
 				 <&pciephy_1>,
 				 <&pciephy_2>,
-				 <&ssusb_phy_0>,
-				 <&ufsphy_lane 0>,
-				 <&ufsphy_lane 1>,
-				 <&ufsphy_lane 2>;
+				 <&usb3phy>,
+				 <&ufsphy 0>,
+				 <&ufsphy 1>,
+				 <&ufsphy 2>;
 			clock-names = "cxo",
 				      "cxo2",
 				      "sleep_clk",
@@ -799,9 +812,6 @@
 			compatible = "qcom,msm8996-bimc";
 			reg = <0x00408000 0x5a000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens0: thermal-sensor@4a9000 {
@@ -852,18 +862,12 @@
 			compatible = "qcom,msm8996-cnoc";
 			reg = <0x00500000 0x1000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		snoc: interconnect@524000 {
 			compatible = "qcom,msm8996-snoc";
 			reg = <0x00524000 0x1c000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		a0noc: interconnect@543000 {
@@ -883,19 +887,14 @@
 			compatible = "qcom,msm8996-a1noc";
 			reg = <0x00562000 0x5000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
 		};
 
 		a2noc: interconnect@583000 {
 			compatible = "qcom,msm8996-a2noc";
 			reg = <0x00583000 0x7000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+			clock-names = "aggre2_ufs_axi", "ufs_axi";
+			clocks = <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				 <&gcc GCC_UFS_AXI_CLK>;
 		};
 
@@ -903,19 +902,14 @@
 			compatible = "qcom,msm8996-mnoc";
 			reg = <0x005a4000 0x1c000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "iface";
-			clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
-				 <&rpmcc RPM_SMD_MMAXI_A_CLK>,
-				 <&mmcc AHB_CLK_SRC>;
+			clock-names = "iface";
+			clocks = <&mmcc AHB_CLK_SRC>;
 		};
 
 		pnoc: interconnect@5c0000 {
 			compatible = "qcom,msm8996-pnoc";
 			reg = <0x005c0000 0x3000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
 		tcsr_mutex: hwlock@740000 {
@@ -2047,7 +2041,7 @@
 			reg = <0x00624000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 
-			phys = <&ufsphy_lane>;
+			phys = <&ufsphy>;
 			phy-names = "ufsphy";
 
 			power-domains = <&gcc UFS_GDSC>;
@@ -2100,25 +2094,18 @@
 
 		ufsphy: phy@627000 {
 			compatible = "qcom,msm8996-qmp-ufs-phy";
-			reg = <0x00627000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00627000 0x1000>;
 
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>;
 			clock-names = "ref";
 
 			resets = <&ufshc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufsphy_lane: phy@627400 {
-				reg = <0x627400 0x12c>,
-				      <0x627600 0x200>,
-				      <0x627c00 0x1b4>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		camss: camss@a34000 {
@@ -2453,9 +2440,8 @@
 					  "handover",
 					  "stop-ack";
 
-			clocks = <&xo_board>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "xo", "aggre2";
+			clocks = <&xo_board>;
+			clock-names = "xo";
 
 			memory-region = <&slpi_mem>;
 
@@ -2500,10 +2486,15 @@
 				 <&gcc GCC_MSS_GPLL0_DIV_CLK>,
 				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
 				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_CLK>,
 				 <&rpmcc RPM_SMD_QDSS_CLK>;
-			clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
-				      "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+			clock-names = "iface",
+				      "bus",
+				      "mem",
+				      "xo",
+				      "gpll0_mss",
+				      "snoc_axi",
+				      "mnoc_axi",
+				      "qdss";
 
 			resets = <&gcc GCC_MSS_RESTART>;
 			reset-names = "mss_restart";
@@ -2644,6 +2635,14 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
+			in-ports {
+				port {
+					funnel_in2_in_modem_etm: endpoint {
+						remote-endpoint =
+						  <&modem_etm_out_funnel_in2>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
@@ -3056,7 +3055,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x06a00000 0xcc00>;
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+				phys = <&hsusb_phy1>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,hird-threshold = /bits/ 8 <0>;
 				snps,dis_u2_susphy_quirk;
@@ -3068,32 +3067,26 @@
 
 		usb3phy: phy@7410000 {
 			compatible = "qcom,msm8996-qmp-usb3-phy";
-			reg = <0x07410000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x07410000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
-				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_CLKREF_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
-				<&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
-			status = "disabled";
-
-			ssusb_phy_0: phy@7410200 {
-				reg = <0x07410200 0x200>,
-				      <0x07410400 0x130>,
-				      <0x07410600 0x1a8>;
-				#phy-cells = <0>;
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-				#clock-cells = <0>;
-				clock-output-names = "usb3_phy_pipe_clk_src";
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-			};
+			status = "disabled";
 		};
 
 		hsusb_phy1: phy@7411000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
index b485bf925ce6..2793cc22d381 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -933,7 +933,7 @@
 				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
 			reg = <0x01c00000 0x2000>,
 			      <0x1b000000 0xf1d>,
@@ -1004,7 +1004,7 @@
 			compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x01da4000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufsphy_lanes>;
+			phys = <&ufsphy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_GDSC>;
@@ -1045,11 +1045,7 @@
 
 		ufsphy: phy@1da7000 {
 			compatible = "qcom,msm8998-qmp-ufs-phy";
-			reg = <0x01da7000 0x18c>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges;
+			reg = <0x01da7000 0x1000>;
 
 			clock-names =
 				"ref",
@@ -1061,14 +1057,8 @@
 			reset-names = "ufsphy";
 			resets = <&ufshc 0>;
 
-			ufsphy_lanes: phy@1da7400 {
-				reg = <0x01da7400 0x128>,
-				      <0x01da7600 0x1fc>,
-				      <0x01da7c00 0x1dc>,
-				      <0x01da7800 0x128>,
-				      <0x01da7a00 0x1fc>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		tcsr_mutex: hwlock@1f40000 {
@@ -1615,9 +1605,8 @@
 
 			px-supply = <&vreg_lvs2a_1p8>;
 
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "xo", "aggre2";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
 
 			memory-region = <&slpi_mem>;
 
@@ -2031,9 +2020,11 @@
 
 			cpu = <&CPU4>;
 
-			port {
-				etm4_out: endpoint {
-					remote-endpoint = <&apss_funnel_in4>;
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
 				};
 			};
 		};
@@ -2048,9 +2039,11 @@
 
 			cpu = <&CPU5>;
 
-			port {
-				etm5_out: endpoint {
-					remote-endpoint = <&apss_funnel_in5>;
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
 				};
 			};
 		};
@@ -2065,9 +2058,11 @@
 
 			cpu = <&CPU6>;
 
-			port {
-				etm6_out: endpoint {
-					remote-endpoint = <&apss_funnel_in6>;
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
 				};
 			};
 		};
@@ -2082,9 +2077,11 @@
 
 			cpu = <&CPU7>;
 
-			port {
-				etm7_out: endpoint {
-					remote-endpoint = <&apss_funnel_in7>;
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
 				};
 			};
 		};
@@ -2149,7 +2146,7 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&qusb2phy>, <&usb1_ssphy>;
+				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -2158,33 +2155,26 @@
 
 		usb3phy: phy@c010000 {
 			compatible = "qcom,msm8998-qmp-usb3-phy";
-			reg = <0x0c010000 0x18c>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x0c010000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@c010200 {
-				reg = <0xc010200 0x128>,
-				      <0xc010400 0x200>,
-				      <0xc010c00 0x20c>,
-				      <0xc010600 0x128>,
-				      <0xc010800 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb2phy: phy@c012000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/pm7250b.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/pm7250b.dtsi
index df0afe82f250..3bf7cf5d1700 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/pm7250b.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/pm7250b.dtsi
@@ -148,7 +148,7 @@
 			status = "disabled";
 		};
 
-		pm7250b_gpios: pinctrl@c000 {
+		pm7250b_gpios: gpio@c000 {
 			compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/pm8550.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/pm8550.dtsi
index db3d5c17a77d..797a18c249a4 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/pm8550.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/pm8550.dtsi
@@ -64,9 +64,6 @@
 
 		pm8550_pwm: pwm {
 			compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
 			#pwm-cells = <2>;
 
 			status = "disabled";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/pm8550ve.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
index c47646a467be..4dc1f03ab2c7 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
@@ -33,16 +33,16 @@
 
 
 &spmi_bus {
-	pm8550ve: pmic@5 {
+	pm8550ve: pmic@PMK8550VE_SID {
 		compatible = "qcom,pm8550", "qcom,spmi-pmic";
-		reg = <0x5 SPMI_USID>;
+		reg = <PMK8550VE_SID SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		pm8550ve_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <PMK8550VE_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/pm8916.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/pm8916.dtsi
index f4de86787743..4b2e8fb47d2d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -41,6 +41,35 @@
 			};
 		};
 
+		pm8916_charger: charger@1000 {
+			compatible = "qcom,pm8916-lbc";
+			reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
+			reg-names = "chgr", "bat_if", "usb", "misc";
+
+			interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "vbat_det",
+					  "fast_chg",
+					  "chg_fail",
+					  "chg_done",
+					  "bat_pres",
+					  "temp_ok",
+					  "coarse_det",
+					  "usb_vbus",
+					  "chg_gone",
+					  "overtemp";
+
+			status = "disabled";
+		};
+
 		pm8916_usbin: usb-detect@1300 {
 			compatible = "qcom,pm8941-misc";
 			reg = <0x1300>;
@@ -91,6 +120,25 @@
 			};
 		};
 
+		pm8916_bms: battery@4000 {
+			compatible = "qcom,pm8916-bms-vm";
+			reg = <0x4000>;
+			interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "cv_leave",
+					  "cv_enter",
+					  "ocv_good",
+					  "ocv_thr",
+					  "fifo",
+					  "state_chg";
+
+			status = "disabled";
+		};
+
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>, <0x6100>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 1eb74017062d..f0ed15458dd7 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -22,7 +22,7 @@
 		mode-bootloader = <0x02>;
 	};
 };
-	
+
 &spmi_bus {
 	pmk8350: pmic@PMK8350_SID {
 		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index d46e591e72b5..0911fb08ed63 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -5,12 +5,15 @@
  * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,qcm2290.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
 / {
@@ -150,6 +153,8 @@
 			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
 			clock-names = "core";
 			#reset-cells = <1>;
+			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
 		};
 	};
 
@@ -194,6 +199,7 @@
 
 		CLUSTER_PD: power-domain-cpu-cluster {
 			#power-domain-cells = <0>;
+			power-domains = <&mpm>;
 			domain-idle-states = <&CLUSTER_SLEEP>;
 		};
 	};
@@ -261,6 +267,24 @@
 				};
 			};
 		};
+
+		mpm: interrupt-controller {
+			compatible = "qcom,mpm";
+			qcom,rpm-msg-ram = <&apss_mpm>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apcs_glb 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#power-domain-cells = <0>;
+			interrupt-parent = <&intc>;
+			qcom,mpm-pin-count = <96>;
+			qcom,mpm-pin-map = <2 275>,  /* TSENS0 uplow */
+					   <5 296>,  /* Soundwire master_irq */
+					   <12 422>, /* DWC3 ss_phy_irq */
+					   <24 79>,  /* Soundwire wake_irq */
+					   <86 183>, /* MPM wake, SPMI */
+					   <90 260>; /* QUSB2_PHY DP+DM */
+		};
 	};
 
 	reserved_memory: reserved-memory {
@@ -424,6 +448,7 @@
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			gpio-ranges = <&tlmm 0 0 127>;
+			wakeup-parent = <&mpm>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -668,6 +693,33 @@
 			status = "disabled";
 		};
 
+		system_noc: interconnect@1880000 {
+			compatible = "qcom,qcm2290-snoc";
+			reg = <0x0 0x01880000 0x0 0x60200>;
+			#interconnect-cells = <2>;
+
+			qup_virt: interconnect-qup {
+				compatible = "qcom,qcm2290-qup-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,qcm2290-mmnrt-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,qcm2290-mmrt-virt";
+				#interconnect-cells = <2>;
+			};
+		};
+
+		config_noc: interconnect@1900000 {
+			compatible = "qcom,qcm2290-cnoc";
+			reg = <0x0 0x01900000 0x0 0x8200>;
+			#interconnect-cells = <2>;
+		};
+
 		qfprom@1b44000 {
 			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b44000 0x0 0x3000>;
@@ -680,6 +732,60 @@
 			};
 		};
 
+		pmu@1b8e300 {
+			compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x01b8e300 0x0 0x600>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <(1353 * 4 * 1000)>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+			};
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x01c40000 0x0 0x1100>,
@@ -692,7 +798,7 @@
 				    "obsrvr",
 				    "intr",
 				    "cnfg";
-			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "periph_irq";
 			qcom,ee = <0>;
 			qcom,channel = <0>;
@@ -707,8 +813,8 @@
 			reg = <0x0 0x04411000 0x0 0x1ff>,
 			      <0x0 0x04410000 0x0 0x8>;
 			#qcom,sensors = <10>;
-			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -720,9 +826,22 @@
 			clock-names = "core";
 		};
 
+		bimc: interconnect@4480000 {
+			compatible = "qcom,qcm2290-bimc";
+			reg = <0x0 0x04480000 0x0 0x80000>;
+			#interconnect-cells = <2>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
-			compatible = "qcom,rpm-msg-ram";
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
 		};
 
 		sram@4690000 {
@@ -755,13 +874,45 @@
 			resets = <&gcc GCC_SDCC1_BCR>;
 
 			power-domains = <&rpmpd QCM2290_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
 			iommus = <&apps_smmu 0xc0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x000f642c>;
 			qcom,ddr-config = <0x80040868>;
 			bus-width = <8>;
 
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <102400 65000>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+			};
 		};
 
 		sdhc_2: mmc@4784000 {
@@ -785,6 +936,12 @@
 			power-domains = <&rpmpd QCM2290_VDDCX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0xa0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -798,11 +955,15 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <261438 150000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -850,6 +1011,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -866,6 +1036,12 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -879,6 +1055,12 @@
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart0_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -893,6 +1075,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -909,6 +1100,12 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -925,6 +1122,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -941,6 +1147,12 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -957,6 +1169,15 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -973,6 +1194,12 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -989,6 +1216,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1005,6 +1241,12 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1018,6 +1260,12 @@
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart4_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1032,6 +1280,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1048,6 +1305,12 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1057,9 +1320,10 @@
 		usb: usb@4ef8800 {
 			compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
 			reg = <0x0 0x04ef8800 0x0 0x400>;
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -1080,6 +1344,13 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			/* TODO: USB<->IPA path */
+			interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
 			wakeup-source;
 
 			#address-cells = <2>;
@@ -1105,6 +1376,225 @@
 			};
 		};
 
+		mdss: display-subsystem@5e00000 {
+			compatible = "qcom,qcm2290-mdss";
+			reg = <0x0 0x05e00000 0x0 0x1000>;
+			reg-names = "mdss";
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x420 0x2>,
+				 <&apps_smmu 0x421 0x0>;
+			interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@5e01000 {
+				compatible = "qcom,qcm2290-dpu";
+				reg = <0x0 0x05e01000 0x0 0x8f000>,
+				      <0x0 0x05eb0000 0x0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "core",
+					      "lut",
+					      "vsync";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd QCM2290_VDDCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-384000000 {
+						opp-hz = /bits/ 64 <384000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@5e94000 {
+				compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x05e94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd QCM2290_VDDCX>;
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@5e94400 {
+				compatible = "qcom,dsi-phy-14nm-2290";
+				reg = <0x0 0x05e94400 0x0 0x100>,
+				      <0x0 0x05e94500 0x0 0x300>,
+				      <0x0 0x05e94800 0x0 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				power-domains = <&rpmpd QCM2290_VDDMX>;
+				required-opps = <&rpmpd_opp_nom>;
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,qcm2290-dispcc";
+			reg = <0x0 0x05f00000 0x0 0x20000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk";
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		remoteproc_mpss: remoteproc@6080000 {
 			compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
 			reg = <0x0 0x06080000 0x0 0x100>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index a9da092691c8..1d82d72f0d20 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -9,6 +9,8 @@
 #define PM7250B_SID 8
 #define PM7250B_SID1 9
 
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -75,26 +77,11 @@
 			no-map;
 		};
 
-		adsp_mem: adsp@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
-
 		cdsp_mem: cdsp@88f00000 {
 			reg = <0x0 0x88f00000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		mpss_mem: mpss@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
-		wpss_mem: wpss@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
-
 		rmtfs_mem: memory@f8500000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0xf8500000 0x0 0x600000>;
@@ -134,6 +121,106 @@
 		enable-active-high;
 		vin-supply = <&vreg_bob>;
 	};
+
+	thermal-zones {
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		chg-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-cam-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 4>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		sdm-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -182,8 +269,9 @@
 		};
 
 		vreg_l7b: ldo7 {
-			regulator-min-microvolt = <2400000>;
-			regulator-max-microvolt = <3544000>;
+			/* Constrained for UFS VCC, at least until UFS driver scales voltage */
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -425,6 +513,42 @@
 	status = "okay";
 };
 
+&pm7250b_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "charger_skin_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "conn_therm";
+	};
+};
+
+&pm7250b_adc_tm {
+	status = "okay";
+
+	charger-skin-therm@0 {
+		reg = <0>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	conn-therm@1 {
+		reg = <1>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
 &pm7325_gpios {
 	volume_down_default: volume-down-default-state {
 		pins = "gpio6";
@@ -448,10 +572,93 @@
 	};
 };
 
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	cam-flash-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	sdm-skin-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wide-rfc-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
 &pmk8350_rtc {
 	status = "okay";
 };
 
+&pmk8350_vadc {
+	status = "okay";
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_xo_therm";
+	};
+
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_quiet_therm";
+	};
+
+	channel@145 {
+		reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_cam_flash_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_sdm_skin_therm";
+	};
+
+	channel@147 {
+		reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_wide_rfc_therm";
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -489,6 +696,26 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
 &sdc2_clk {
 	drive-strength = <16>;
 	bias-disable;
@@ -632,6 +859,28 @@
 	};
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b>;
+	vcc-max-microamp = <800000>;
+	/*
+	 * Technically l9b enables an eLDO (supplied by s1b) which then powers
+	 * VCCQ2 of the UFS.
+	 */
+	vccq-supply = <&vreg_l9b>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c>;
+	vdda-pll-supply = <&vreg_l6b>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
@@ -665,3 +914,8 @@
 
 	status = "okay";
 };
+
+&wifi {
+	qcom,ath11k-calibration-variant = "Fairphone_5";
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qcm6490-idp.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
new file mode 100644
index 000000000000..03e97e27d16d
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCM6490 IDP";
+	compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@84800000 {
+			reg = <0x0 0x84800000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@8a700000 {
+			reg = <0x0 0x8a700000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8ae00000 {
+			reg = <0x0 0x8ae00000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8b31a000 {
+			reg = <0x0 0x8b31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted_apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <4350000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l3-supply = <&vreg_s2b_0p876>;
+		vdd-l5-supply = <&vreg_s2b_0p876>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s2b_0p876: smps2 {
+			regulator-min-microvolt = <570070>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p752: ldo4 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <820000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		reg_l5b_0p752: ldo5 {
+			regulator-min-microvolt = <552000>;
+			regulator-max-microvolt = <832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s2c_0p752: smps2 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s5c_0p752: smps5 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7c_0p752: smps7 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <35440000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	vmmc-supply = <&vreg_l7b_2p952>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 2>, /* ADSP */
+			       <48 4>; /* NFC */
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&wifi {
+	memory-region = <&wlan_fw_mem>;
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 2721f32dfb71..2f2eeaf2e945 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -558,9 +558,6 @@
 			reg = <0x00400000 0x80000>;
 			compatible = "qcom,qcs404-bimc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				<&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -601,18 +598,12 @@
 			reg = <0x00500000 0x15080>;
 			compatible = "qcom,qcs404-pcnoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-				<&rpmcc RPM_SMD_PNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			reg = <0x00580000 0x23080>;
 			compatible = "qcom,qcs404-snoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				<&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		remoteproc_cdsp: remoteproc@b00000 {
@@ -1461,7 +1452,7 @@
 			};
 		};
 
-		pcie: pci@10000000 {
+		pcie: pcie@10000000 {
 			compatible = "qcom,pcie-qcs404";
 			reg = <0x10000000 0xf1d>,
 			      <0x10000f20 0xa8>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
new file mode 100644
index 000000000000..8bb7d13d85f6
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Qualcomm Technologies, Inc. Robotics RB3gen2";
+	compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@84800000 {
+			reg = <0x0 0x84800000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@8a700000 {
+			reg = <0x0 0x8a700000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8ae00000 {
+			reg = <0x0 0x8ae00000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8b31a000 {
+			reg = <0x0 0x8b31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted_apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <4350000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l3-supply = <&vreg_s2b_0p876>;
+		vdd-l5-supply = <&vreg_s2b_0p876>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s2b_0p876: smps2 {
+			regulator-min-microvolt = <570070>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p752: ldo4 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <820000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		reg_l5b_0p752: ldo5 {
+			regulator-min-microvolt = <552000>;
+			regulator-max-microvolt = <832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s2c_0p752: smps2 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s5c_0p752: smps5 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7c_0p752: smps7 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <35440000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 2>, /* ADSP */
+			       <48 4>; /* NFC */
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&wifi {
+	memory-region = <&wlan_fw_mem>;
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 1c0e5d271e91..832f472c4b7a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -381,6 +381,20 @@
 			#power-domain-cells = <1>;
 		};
 
+		ecpricc: clock-controller@280000 {
+			compatible = "qcom,qdu1000-ecpricc";
+			reg = <0x0 0x00280000 0x0 0x31c00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		gpi_dma0: dma-controller@900000  {
 			compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x900000 0x0 0x60000>;
@@ -1446,13 +1460,10 @@
 		system-cache-controller@19200000 {
 			compatible = "qcom,qdu1000-llcc";
 			reg = <0 0x19200000 0 0xd80000>,
-			      <0 0x1a200000 0 0x80000>,
-			      <0 0x221c8128 0 0x4>;
-			reg-names = "llcc_base",
-				    "llcc_broadcast_base",
-				    "multi_channel_register";
+			      <0 0x1a200000 0 0x80000>;
+			reg-names = "llcc0_base",
+				    "llcc_broadcast_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-			multi-ch-bit-off = <24 2>;
 		};
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index a451625019f6..6d76ca2bcc23 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -23,6 +23,14 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	clocks {
+		clk40M: can-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+			#clock-cells = <0>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "gpio-keys";
@@ -40,6 +48,17 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -158,6 +177,68 @@
 	};
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_hdmi_out_1p2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm2250_l5>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
 &pm2250_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -376,7 +457,34 @@
 	status = "okay";
 };
 
+&spi5 {
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&clk40M>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vdc_5v>;
+		xceiver-supply = <&vdc_5v>;
+	};
+};
+
 &tlmm {
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio41";
+		function = "gpio";
+		input-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio46";
+		function = "gpio";
+		bias-disable;
+	};
+
 	sd_det_in_on: sd-det-in-on-state {
 		pins = "gpio88";
 		function = "gpio";
@@ -415,6 +523,10 @@
 	status = "okay";
 };
 
+&usb_dwc3 {
+	dr_mode = "host";
+};
+
 &usb_hsphy {
 	vdd-supply = <&pm2250_l12>;
 	vdda-pll-supply = <&pm2250_l13>;
@@ -427,6 +539,7 @@
 	vdd-1.8-xo-supply = <&pm2250_l13>;
 	vdd-1.3-rfa-supply = <&pm2250_l10>;
 	vdd-3.3-ch0-supply = <&pm2250_l22>;
+	qcom,ath10k-calibration-variant = "Thundercomm_RB1";
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 9d1149b646cd..61a40cfabc19 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -15,6 +15,7 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &uart3;
 	};
 
 	chosen {
@@ -280,6 +281,12 @@
 	status = "okay";
 };
 
+&remoteproc_mpss {
+	firmware-name = "/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -346,13 +353,14 @@
 		};
 
 		vreg_l8a_0p664: l8 {
-			regulator-min-microvolt = <400000>;
-			regulator-max-microvolt = <728000>;
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <640000>;
 		};
 
 		vreg_l9a_1p8: l9 {
 			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10a_1p8: l10 {
@@ -389,11 +397,13 @@
 		vreg_l16a_1p3: l16 {
 			regulator-min-microvolt = <1704000>;
 			regulator-max-microvolt = <1904000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l17a_1p3: l17 {
 			regulator-min-microvolt = <1152000>;
 			regulator-max-microvolt = <1384000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l18a_1p232: l18 {
@@ -424,8 +434,9 @@
 		};
 
 		vreg_l23a_3p3: l23 {
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l24a_2p96: l24 {
@@ -487,6 +498,66 @@
 			       <56 3>, <61 2>, <64 1>,
 			       <68 1>, <72 8>, <96 1>;
 
+	uart3_default: uart3-default-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart3_sleep: uart3-sleep-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	lt9611_rst_pin: lt9611-rst-state {
 		pins = "gpio41";
 		function = "gpio";
@@ -508,6 +579,26 @@
 	};
 };
 
+&uart3 {
+	interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
+	pinctrl-0 = <&uart3_default>;
+	pinctrl-1 = <&uart3_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3988-bt";
+
+		vddio-supply = <&vreg_l9a_1p8>;
+		vddxo-supply = <&vreg_l16a_1p3>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l23a_3p3>;
+		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		max-speed = <3200000>;
+	};
+};
+
 &uart4 {
 	status = "okay";
 };
@@ -518,7 +609,6 @@
 
 &usb_dwc3 {
 	maximum-speed = "super-speed";
-	dr_mode = "peripheral";
 };
 
 &usb_hsphy {
@@ -536,6 +626,16 @@
 	status = "okay";
 };
 
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>;
+	vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
+	qcom,ath10k-calibration-variant = "Thundercomm_RB2";
+
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
index bb149e577914..edc0e42ee017 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
@@ -46,7 +46,7 @@
 		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
 		assigned-clock-rates = <24000000>;
 
-		dovdd-supply  = <&vreg_l7f_1p8>;
+		dovdd-supply = <&vreg_l7f_1p8>;
 		avdd-supply = <&vdc_5v>;
 		dvdd-supply = <&vdc_5v>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 9c76da9f8db4..0947f6b60ebb 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -23,6 +23,7 @@
 
 	aliases {
 		serial0 = &uart12;
+		serial1 = &uart6;
 		sdhc2 = &sdhc_2;
 	};
 
@@ -64,8 +65,8 @@
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
 			default-state = "off";
+			panic-indicator;
 		};
 
 		led-wlan {
@@ -1263,6 +1264,14 @@
 		"HST_WLAN_UART_TX",
 		"HST_WLAN_UART_RX";
 
+	bt_en_state: bt-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+
 	lt9611_irq_pin: lt9611-irq-state {
 		pins = "gpio63";
 		function = "gpio";
@@ -1296,6 +1305,26 @@
 	};
 };
 
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6390-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_state>;
+
+		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddpmu-supply = <&vreg_s2f_0p95>;
+		vddaon-supply = <&vreg_s6a_0p95>;
+		vddrfa0p9-supply = <&vreg_s2f_0p95>;
+		vddrfa1p3-supply = <&vreg_s8c_1p3>;
+		vddrfa1p9-supply = <&vreg_s5a_1p9>;
+	};
+};
+
 &uart12 {
 	status = "okay";
 };
@@ -1425,7 +1454,7 @@
 
 		altmodes {
 			displayport {
-				svid = <0xff01>;
+				svid = /bits/ 16 <0xff01>;
 				vdo = <0x00001c46>;
 			};
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 9760bb4b468c..26ad05bd3b3f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -461,6 +461,11 @@
 			  "ANALOG_PON_OPT";
 };
 
+&pmm8654au_0_pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
 &pmm8654au_1_gpios {
 	gpio-line-names = "PMIC_C_ID0",
 			  "PMIC_C_ID1",
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index b6a93b11cbbd..a7eaca33d326 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1487,6 +1487,11 @@
 			};
 		};
 
+		rng: rng@10d2000 {
+			compatible = "qcom,sa8775p-trng", "qcom,trng";
+			reg = <0 0x010d2000 0 0x1000>;
+		};
+
 		ufs_mem_hc: ufs@1d84000 {
 			compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
@@ -1610,8 +1615,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1697,8 +1702,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 7 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1760,8 +1765,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 10 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 9 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -1910,6 +1915,50 @@
 			interrupt-controller;
 		};
 
+		tsens2: thermal-sensor@c251000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c251000 0x0 0x1ff>,
+			      <0x0 0x0c224000 0x0 0x8>;
+			interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <13>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens3: thermal-sensor@c252000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c252000 0x0 0x1ff>,
+			      <0x0 0x0c225000 0x0 0x8>;
+			interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <13>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c263000 0x0 0x1ff>,
+			      <0x0 0x0c222000 0x0 0x8>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <12>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c265000 0x0 0x1ff>,
+			      <0x0 0x0c223000 0x0 0x8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <12>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x400>;
@@ -1920,6 +1969,11 @@
 			#clock-cells = <0>;
 		};
 
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c440000 0x0 0x1100>,
@@ -2181,7 +2235,7 @@
 			compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt";
 			reg = <0x0 0x17c10000 0x0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		memtimer: timer@17c20000 {
@@ -2401,6 +2455,1058 @@
 		};
 	};
 
+	thermal-zones {
+		aoss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-3-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		audio-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pcie-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-0-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-3-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-4-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-5-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pcie-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-0-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-3-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		ddrss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-1-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-3-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		ddrss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-1-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
 	arch_timer: timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
@@ -2409,7 +3515,7 @@
 			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	pcie0: pci@1c00000{
+	pcie0: pcie@1c00000 {
 		compatible = "qcom,pcie-sa8775p";
 		reg = <0x0 0x01c00000 0x0 0x3000>,
 		      <0x0 0x40000000 0x0 0xf20>,
@@ -2509,7 +3615,7 @@
 		status = "disabled";
 	};
 
-	pcie1: pci@1c10000{
+	pcie1: pcie@1c10000 {
 		compatible = "qcom,pcie-sa8775p";
 		reg = <0x0 0x01c10000 0x0 0x3000>,
 		      <0x0 0x60000000 0x0 0xf20>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
index b9d27ebab2db..6dafaff2ed21 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "sc7180.dtsi"
@@ -129,6 +130,113 @@
 		pinctrl-names = "default";
 	};
 
+	sound: sound {
+		compatible = "qcom,sc7180-qdsp6-sndcard";
+		pinctrl-0 = <&pri_mi2s_active>, <&pri_mi2s_mclk_active>, <&ter_mi2s_active>;
+		pinctrl-names = "default";
+		model = "Acer-Aspire-1";
+
+		audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		multimedia1-dai-link {
+			link-name = "MultiMedia1";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+			};
+		};
+
+		multimedia2-dai-link {
+			link-name = "MultiMedia2";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+			};
+		};
+
+		multimedia3-dai-link {
+			link-name = "MultiMedia3";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+			};
+		};
+
+		multimedia4-dai-link {
+			link-name = "MultiMedia4";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+			};
+		};
+
+		primary-rx-dai-link {
+			link-name = "Primary MI2S Playback";
+
+			cpu {
+				sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0>;
+			};
+		};
+
+		primary-tx-dai-link {
+			link-name = "Primary MI2S Capture";
+
+			cpu {
+				sound-dai = <&q6afedai PRIMARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0>;
+			};
+		};
+
+		tertiary-rx-dai-link {
+			link-name = "Tertiary MI2S Playback";
+
+			cpu {
+				sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+		};
+
+		displayport-rx-dai-link {
+			link-name = "DisplayPort Playback";
+
+			cpu {
+				sound-dai = <&q6afedai DISPLAY_PORT_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+	};
+
 	reg_tp_3p3: touchpad-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "tp_3p3";
@@ -209,9 +317,22 @@
 		AVDD-supply = <&vreg_l15a_1p8>;
 		MICVDD-supply = <&reg_codec_3p3>;
 		VBAT-supply = <&reg_codec_3p3>;
+		DBVDD-supply = <&vreg_l15a_1p8>;
+		LDO1-IN-supply = <&vreg_l15a_1p8>;
+
+		/*
+		 * NOTE: The board has a path from this codec to the
+		 * DMIC microphones in the lid, however some of the option
+		 * resistors are absent and the microphones are connected
+		 * to the SoC instead.
+		 *
+		 * If the resistors were to be changed by the user to
+		 * connect the codec, the following could be used:
+		 *
+		 * realtek,dmic1-data-pin = <1>;
+		 * realtek,dmic1-clk-pin = <1>;
+		 */
 
-		realtek,dmic1-data-pin = <1>;
-		realtek,dmic1-clk-pin = <1>;
 		realtek,jd-src = <1>;
 	};
 };
@@ -351,6 +472,49 @@
 	status = "disabled";
 };
 
+&pm6150_rtc {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+
+	dai@17 {
+		reg = <PRIMARY_MI2S_TX>;
+		qcom,sd-lines = <0>;
+	};
+
+	dai@20 {
+		reg = <TERTIARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+
+	dai@104 {
+		reg = <DISPLAY_PORT_RX>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -359,6 +523,12 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	memory-region = <&adsp_mem>;
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
 &remoteproc_mpss {
 	firmware-name = "/*(DEBLOBBED)*/";
 	status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index 0be62331f982..067813f5f437 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -141,7 +141,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &panel {
-	compatible = "kingdisplay,kd116n21-30nv-a010";
+	compatible = "edp-panel";
 };
 
 &pen_insert {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 11f353d416b4..4dcaa15caef2 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2966,8 +2966,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 9 IRQ_TYPE_LEVEL_HIGH>;
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3100,8 +3100,12 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x800 0x2>;
 
@@ -3576,7 +3580,7 @@
 			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index e058188f7a33..c105cdd10d3a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -17,6 +17,9 @@
  * required by the setup for Chrome boards.
  */
 
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_zap_mem;
+/delete-node/ &gpu_zap_shader;
 /delete-node/ &hyp_mem;
 /delete-node/ &xbl_mem;
 /delete-node/ &reserved_xbl_uefi_log;
@@ -24,11 +27,6 @@
 
 / {
 	reserved-memory {
-		adsp_mem: memory@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
-
 		camera_mem: memory@8ad00000 {
 			reg = <0x0 0x8ad00000 0x0 0x500000>;
 			no-map;
@@ -38,11 +36,6 @@
 			reg = <0x0 0x8b200000 0x0 0x500000>;
 			no-map;
 		};
-
-		wpss_mem: memory@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
 	};
 };
 
@@ -94,9 +87,31 @@
 	};
 };
 
+/* Currently not used */
+&remoteproc_cdsp {
+	/delete-property/ memory-region;
+};
+
 &remoteproc_wpss {
-	status = "okay";
+	compatible = "qcom,sc7280-wpss-pil";
+	clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+		 <&gcc GCC_WPSS_AHB_CLK>,
+		 <&gcc GCC_WPSS_RSCP_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "ahb_bdg",
+		      "ahb",
+		      "rscp",
+		      "xo";
+
+	resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+		 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+	reset-names = "restart", "pdc_sync";
+
+	qcom,halt-regs = <&tcsr_1 0x17000>;
+
 	firmware-name = "/*(DEBLOBBED)*/";
+
+	status = "okay";
 };
 
 &scm {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
index f08f3dac14c0..07ff9118b41d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -8,11 +8,6 @@
 
 / {
 	reserved-memory {
-		mpss_mem: memory@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
 		mba_mem: memory@9c700000 {
 			reg = <0x0 0x9c700000 0x0 0x200000>;
 			no-map;
@@ -33,6 +28,8 @@
 
 &remoteproc_mpss {
 	compatible = "qcom,sc7280-mss-pil";
+	reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
+	reg-names = "qdsp6", "rmb";
 
 	clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
 		 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
index 2febd6126d4c..3ebc915f0dc2 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
@@ -7,5 +7,6 @@
 
 /* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */
 
+/delete-node/ &mpss_mem;
 /delete-node/ &remoteproc_mpss;
 /delete-node/ &rmtfs_mem;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 2ff549f4dc7a..a0059527d9e4 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -499,6 +499,25 @@
 	status = "okay";
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p9>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p8>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 66f1eb83cca7..83b5b76ba179 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -91,68 +92,93 @@
 		#size-cells = <2>;
 		ranges;
 
-		wlan_ce_mem: memory@4cd000 {
+		wlan_ce_mem: wlan-ce@4cd000 {
 			no-map;
 			reg = <0x0 0x004cd000 0x0 0x1000>;
 		};
 
-		hyp_mem: memory@80000000 {
+		hyp_mem: hyp@80000000 {
 			reg = <0x0 0x80000000 0x0 0x600000>;
 			no-map;
 		};
 
-		xbl_mem: memory@80600000 {
+		xbl_mem: xbl@80600000 {
 			reg = <0x0 0x80600000 0x0 0x200000>;
 			no-map;
 		};
 
-		aop_mem: memory@80800000 {
+		aop_mem: aop@80800000 {
 			reg = <0x0 0x80800000 0x0 0x60000>;
 			no-map;
 		};
 
-		aop_cmd_db_mem: memory@80860000 {
+		aop_cmd_db_mem: aop-cmd-db@80860000 {
 			reg = <0x0 0x80860000 0x0 0x20000>;
 			compatible = "qcom,cmd-db";
 			no-map;
 		};
 
-		reserved_xbl_uefi_log: memory@80880000 {
+		reserved_xbl_uefi_log: xbl-uefi-res@80880000 {
 			reg = <0x0 0x80884000 0x0 0x10000>;
 			no-map;
 		};
 
-		sec_apps_mem: memory@808ff000 {
+		sec_apps_mem: sec-apps@808ff000 {
 			reg = <0x0 0x808ff000 0x0 0x1000>;
 			no-map;
 		};
 
-		smem_mem: memory@80900000 {
+		smem_mem: smem@80900000 {
 			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
 
-		cpucp_mem: memory@80b00000 {
+		cpucp_mem: cpucp@80b00000 {
 			no-map;
 			reg = <0x0 0x80b00000 0x0 0x100000>;
 		};
 
-		wlan_fw_mem: memory@80c00000 {
+		wlan_fw_mem: wlan-fw@80c00000 {
 			reg = <0x0 0x80c00000 0x0 0xc00000>;
 			no-map;
 		};
 
-		video_mem: memory@8b200000 {
+		adsp_mem: adsp@86700000 {
+			reg = <0x0 0x86700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		video_mem: video@8b200000 {
 			reg = <0x0 0x8b200000 0x0 0x500000>;
 			no-map;
 		};
 
-		ipa_fw_mem: memory@8b700000 {
+		cdsp_mem: cdsp@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b700000 {
 			reg = <0 0x8b700000 0 0x10000>;
 			no-map;
 		};
 
-		rmtfs_mem: memory@9c900000 {
+		gpu_zap_mem: zap@8b71a000 {
+			reg = <0 0x8b71a000 0 0x2000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@9c900000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0x9c900000 0x0 0x280000>;
 			no-map;
@@ -906,7 +932,7 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
 				 <0>, <&pcie1_phy>,
-				 <0>, <0>, <0>,
+				 <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
 				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
@@ -974,6 +1000,7 @@
 
 			bus-width = <8>;
 			supports-cqe;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -2034,6 +2061,11 @@
 			};
 		};
 
+		rng: rng@10d3000 {
+			compatible = "qcom,sc7280-trng", "qcom,trng";
+			reg = <0 0x010d3000 0 0x1000>;
+		};
+
 		cnoc2: interconnect@1500000 {
 			reg = <0 0x01500000 0 0x1000>;
 			compatible = "qcom,sc7280-cnoc2";
@@ -2126,7 +2158,7 @@
 			qcom,smem-state-names = "wlan-smp2p-out";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sc7280";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2233,6 +2265,99 @@
 			status = "disabled";
 		};
 
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sc7280-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x80 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sc7280-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_1_CLKREF_EN>;
+			clock-names = "ref", "ref_aux", "qref";
+
+			power-domains = <&rpmhpd SC7280_MX>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			iommus = <&apps_smmu 0x4e4 0x0011>,
+				 <&apps_smmu 0x4e6 0x0011>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sc7280-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x4e4 0x0011>,
+				 <&apps_smmu 0x4e4 0x0011>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "memory";
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sc7280-ipa";
 
@@ -2598,7 +2723,8 @@
 				    "cx_mem",
 				    "cx_dbgc";
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-			iommus = <&adreno_smmu 0 0x401>;
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
 			operating-points-v2 = <&gpu_opp_table>;
 			qcom,gmu = <&gmu>;
 			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
@@ -2608,6 +2734,10 @@
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
 
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_zap_mem>;
+			};
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -2615,14 +2745,14 @@
 					opp-hz = /bits/ 64 <315000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <1804000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-450000000 {
 					opp-hz = /bits/ 64 <450000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 					opp-peak-kBps = <4068000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				/* Only applicable for SKUs which has 550Mhz as Fmax */
@@ -2637,28 +2767,28 @@
 					opp-hz = /bits/ 64 <550000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 					opp-peak-kBps = <6832000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-608000000 {
 					opp-hz = /bits/ 64 <608000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
 					opp-peak-kBps = <8368000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-700000000 {
 					opp-hz = /bits/ 64 <700000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-812000000 {
 					opp-hz = /bits/ 64 <812000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-840000000 {
@@ -2772,12 +2902,12 @@
 					"gpu_cc_hub_aon_clk";
 
 			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
 		};
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sc7280-mpss-pas";
-			reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
-			reg-names = "qdsp6", "rmb";
+			reg = <0 0x04080000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -3329,6 +3459,7 @@
 			operating-points-v2 = <&sdhc2_opp_table>;
 
 			bus-width = <4>;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 
@@ -3399,6 +3530,32 @@
 
 			#clock-cells = <1>;
 			#phy-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		usb_2: usb@8cf8800 {
@@ -3426,8 +3583,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 12 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 13 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -3479,8 +3636,77 @@
 			status = "disabled";
 		};
 
+		remoteproc_adsp: remoteproc@3700000 {
+			compatible = "qcom,sc7280-adsp-pas";
+			reg = <0 0x03700000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_LCX>,
+					<&rpmhpd SC7280_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		remoteproc_wpss: remoteproc@8a00000 {
-			compatible = "qcom,sc7280-wpss-pil";
+			compatible = "qcom,sc7280-wpss-pas";
 			reg = <0 0x08a00000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
@@ -3492,12 +3718,8 @@
 			interrupt-names = "wdog", "fatal", "ready", "handover",
 					  "stop-ack", "shutdown-ack";
 
-			clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
-				 <&gcc GCC_WPSS_AHB_CLK>,
-				 <&gcc GCC_WPSS_RSCP_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ahb_bdg", "ahb",
-				      "rscp", "xo";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
 
 			power-domains = <&rpmhpd SC7280_CX>,
 					<&rpmhpd SC7280_MX>;
@@ -3510,11 +3732,6 @@
 			qcom,smem-states = <&wpss_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
-			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
-				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
-			reset-names = "restart", "pdc_sync";
-
-			qcom,halt-regs = <&tcsr_1 0x17000>;
 
 			status = "disabled";
 
@@ -3656,6 +3873,144 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		remoteproc_cdsp: remoteproc@a300000 {
+			compatible = "qcom,sc7280-cdsp-pas";
+			reg = <0 0x0a300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_CX>,
+					<&rpmhpd SC7280_MX>;
+			power-domain-names = "cx", "mx";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x11a1 0x0420>,
+							 <&apps_smmu 0x1181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x11a2 0x0420>,
+							 <&apps_smmu 0x1182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x11a3 0x0420>,
+							 <&apps_smmu 0x1183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x11a4 0x0420>,
+							 <&apps_smmu 0x1184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x11a5 0x0420>,
+							 <&apps_smmu 0x1185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x11a6 0x0420>,
+							 <&apps_smmu 0x1186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x11a7 0x0420>,
+							 <&apps_smmu 0x1187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x11a8 0x0420>,
+							 <&apps_smmu 0x1188 0x0420>;
+					};
+
+					/* note: secure cb9 in downstream */
+
+					compute-cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&apps_smmu 0x11ab 0x0420>,
+							 <&apps_smmu 0x118b 0x0420>;
+					};
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&apps_smmu 0x11ac 0x0420>,
+							 <&apps_smmu 0x118c 0x0420>;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+						iommus = <&apps_smmu 0x11ad 0x0420>,
+							 <&apps_smmu 0x118d 0x0420>;
+					};
+
+					compute-cb@14 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <14>;
+						iommus = <&apps_smmu 0x11ae 0x0420>,
+							 <&apps_smmu 0x118e 0x0420>;
+					};
+				};
+			};
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -3681,9 +4036,9 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 17 IRQ_TYPE_EDGE_BOTH>;
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -3793,6 +4148,86 @@
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4a000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4b000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci2_default &cci3_default>;
+			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc7280-camcc";
 			reg = <0 0x0ad00000 0 0x10000>;
@@ -3847,8 +4282,12 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc2 SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x900 0x402>;
 
@@ -4298,6 +4737,62 @@
 			gpio-ranges = <&tlmm 0 0 175>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_default: cci3-default-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			dp_hot_plug_det: dp-hot-plug-det-state {
 				pins = "gpio47";
 				function = "dp_hot";
@@ -5222,7 +5717,7 @@
 			compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 			status = "reserved"; /* Owned by Gunyah hyp */
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index 03235e2ef7b2..dee869ccf6fd 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -452,8 +452,8 @@
 };
 
 &pcie3 {
-	perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 180 GPIO_ACTIVE_HIGH>;
 	pinctrl-0 = <&pcie3_default_state>;
 	pinctrl-names = "default";
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc8180x-primus.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
index a26172779571..3ffb2299c332 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -43,7 +43,7 @@
 		pinctrl-0 = <&hall_int_active_state>;
 
 		lid-switch {
-			gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+			gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_LID>;
 			wakeup-source;
@@ -386,12 +386,18 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10e_2p9: ldo10 {
 			regulator-min-microvolt = <2904000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l12e: ldo12 {
@@ -531,8 +537,8 @@
 };
 
 &pcie1 {
-	perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2_default_state>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index a34f438ef2d9..0430d99091e3 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8180x.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -1684,7 +1685,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1736,7 +1737,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1d80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
 
@@ -1751,6 +1751,7 @@
 
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1761,7 +1762,7 @@
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
 				 <&gcc GCC_PCIE_0_PIPE_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
@@ -1781,7 +1782,7 @@
 			status = "disabled";
 		};
 
-		pcie3: pci@1c08000 {
+		pcie3: pcie@1c08000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1833,7 +1834,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1e00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
 				    <0x100 &apps_smmu 0x1e01 0x1>;
 
@@ -1848,6 +1848,7 @@
 
 			phys = <&pcie3_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1858,7 +1859,7 @@
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_3_CLKREF_CLK>,
-				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE3_PHY_REFGEN_CLK>,
 				 <&gcc GCC_PCIE_3_PIPE_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
@@ -1879,7 +1880,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c10000 {
+		pcie1: pcie@1c10000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c10000 0 0x3000>,
 			      <0 0x68000000 0 0xf1d>,
@@ -1931,7 +1932,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1c80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
 				    <0x100 &apps_smmu 0x1c81 0x1>;
 
@@ -1946,6 +1946,7 @@
 
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1977,7 +1978,7 @@
 			status = "disabled";
 		};
 
-		pcie2: pci@1c18000 {
+		pcie2: pcie@1c18000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c18000 0 0x3000>,
 			      <0 0x70000000 0 0xf1d>,
@@ -2029,7 +2030,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1d00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d00 0x1>,
 				    <0x100 &apps_smmu 0x1d01 0x1>;
 
@@ -2044,6 +2044,7 @@
 
 			phys = <&pcie2_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -2062,7 +2063,7 @@
 				      "refgen",
 				      "pipe";
 			#clock-cells = <0>;
-			clock-output-names = "pcie_3_pipe_clk";
+			clock-output-names = "pcie_2_pipe_clk";
 
 			#phy-cells = <0>;
 
@@ -2114,6 +2115,14 @@
 					<0 0>,
 					<0 0>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_0_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
 			status = "disabled";
 		};
 
@@ -2548,10 +2557,10 @@
 		usb_prim: usb@a6f8800 {
 			compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
@@ -2622,10 +2631,10 @@
 				      "xo";
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 			power-domains = <&gcc USB30_SEC_GDSC>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -2704,11 +2713,15 @@
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
 					 <&gcc GCC_DISP_HF_AXI_CLK>,
 					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
-					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>;
 				clock-names = "iface",
 					      "bus",
 					      "core",
-					      "vsync";
+					      "vsync",
+					      "rot",
+					      "lut";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
 						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
@@ -3117,8 +3130,6 @@
 				phys = <&edp_phy>;
 				phy-names = "dp";
 
-				#sound-dai-cells = <0>;
-
 				operating-points-v2 = <&edp_opp_table>;
 				power-domains = <&rpmhpd SC8180X_MMCX>;
 
@@ -3418,10 +3429,12 @@
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
 		};
 
 		apss_shared: mailbox@17c00000 {
-			compatible = "qcom,sc8180x-apss-shared";
+			compatible = "qcom,sc8180x-apss-shared", "qcom,sdm845-apss-shared";
 			reg = <0x0 0x17c00000 0x0 0x1000>;
 			#mbox-cells = <1>;
 		};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 2daab00b1373..4987f8beeb1d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -458,6 +458,8 @@
 };
 
 &mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
+
 	vdda-phy-supply = <&vreg_l6b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
@@ -561,6 +563,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 6dc92a9252c2..3fdc864cf418 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -82,6 +82,9 @@
 	leds {
 		compatible = "gpio-leds";
 
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_indicator_en>;
+
 		led-camera-indicator {
 			label = "white:camera-indicator";
 			function = LED_FUNCTION_INDICATOR;
@@ -570,6 +573,7 @@
 
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
+	/delete-property/ #sound-dai-cells;
 
 	data-lanes = <0 1 2 3>;
 
@@ -601,6 +605,7 @@
 };
 
 &mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
 	vdda-phy-supply = <&vreg_l6b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
@@ -717,6 +722,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 
@@ -1277,6 +1284,13 @@
 		};
 	};
 
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio28";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio25";
 		function = "gpio";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index cad59af7ccef..febf28356ff8 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
 #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8280xp.h>
@@ -2731,7 +2732,7 @@
 			status = "disabled";
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2807,7 +2808,7 @@
 			status = "disabled";
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			reg = <0 0x03250000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.6.0";
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2844,7 +2845,7 @@
 			#reset-cells = <1>;
 		};
 
-		swr2: soundwire-controller@3330000 {
+		swr2: soundwire@3330000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03330000 0 0x2000>;
 			interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>,
@@ -3450,6 +3451,20 @@
 			};
 		};
 
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sc8280xp-camcc";
+			reg = <0 0x0ad00000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss0: display-subsystem@ae00000 {
 			compatible = "qcom,sc8280xp-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -4030,6 +4045,7 @@
 		sram@c3f0000 {
 			compatible = "qcom,rpmh-stats";
 			reg = <0 0x0c3f0000 0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -4225,7 +4241,7 @@
 			compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 775700f78e0f..513fe5e76b68 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -606,9 +606,6 @@
 			compatible = "qcom,sdm660-bimc";
 			reg = <0x01008000 0x78000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		restart@10ac000 {
@@ -620,28 +617,17 @@
 			compatible = "qcom,sdm660-cnoc";
 			reg = <0x01500000 0x10000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		snoc: interconnect@1626000 {
 			compatible = "qcom,sdm660-snoc";
 			reg = <0x01626000 0x7090>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		anoc2_smmu: iommu@16c0000 {
 			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
 			reg = <0x016c0000 0x40000>;
-
-			assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			assigned-clock-rates = <1000>;
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "bus";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -686,16 +672,12 @@
 			compatible = "qcom,sdm660-a2noc";
 			reg = <0x01704000 0xc100>;
 			#interconnect-cells = <1>;
-			clock-names = "bus",
-				      "bus_a",
-				      "ipa",
+			clock-names = "ipa",
 				      "ufs_axi",
 				      "aggre2_ufs_axi",
 				      "aggre2_usb3_axi",
 				      "cfg_noc_usb2_axi";
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-				 <&rpmcc RPM_SMD_IPA_CLK>,
+			clocks = <&rpmcc RPM_SMD_IPA_CLK>,
 				 <&gcc GCC_UFS_AXI_CLK>,
 				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
@@ -706,10 +688,8 @@
 			compatible = "qcom,sdm660-mnoc";
 			reg = <0x01745000 0xa010>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "iface";
-			clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
-				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
-				 <&mmcc AHB_CLK_SRC>;
+			clock-names = "iface";
+			clocks = <&mmcc AHB_CLK_SRC>;
 		};
 
 		tsens: thermal-sensor@10ae000 {
@@ -1186,7 +1166,9 @@
 			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
 				 <&gcc GCC_BIMC_GFX_CLK>,
 				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
-			clock-names = "iface", "mem", "mem_iface";
+			clock-names = "iface",
+			              "mem",
+				      "mem_iface";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -1288,20 +1270,16 @@
 				 <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_SLEEP_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
 			clock-names = "cfg_noc",
 				      "core",
 				      "iface",
 				      "sleep",
-				      "mock_utmi",
-				      "bus";
+				      "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_MASTER_CLK>,
-					  <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			assigned-clock-rates = <19200000>, <120000000>,
-					       <19200000>;
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
 
 			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
@@ -2204,10 +2182,9 @@
 
 			clocks = <&mmcc MNOC_AHB_CLK>,
 				 <&mmcc BIMC_SMMU_AHB_CLK>,
-				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
 				 <&mmcc BIMC_SMMU_AXI_CLK>;
 			clock-names = "iface-mm", "iface-smmu",
-				      "bus-mm", "bus-smmu";
+				      "bus-smmu";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -2324,12 +2301,6 @@
 			compatible = "qcom,sdm660-gnoc";
 			reg = <0x17900000 0xe000>;
 			#interconnect-cells = <1>;
-			/*
-			 * This one apparently features no clocks,
-			 * so let's not mess with the driver needlessly
-			 */
-			clock-names = "bus", "bus_a";
-			clocks = <&xo_board>, <&xo_board>;
 		};
 
 		apcs_glb: mailbox@17911000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 301eca9a4f31..057579ae3013 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -80,6 +80,10 @@
 	};
 };
 
+&lpass {
+	status = "okay";
+};
+
 &pm8953_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -239,3 +243,18 @@
 &usb3_dwc3 {
 	dr_mode = "peripheral";
 };
+
+&wcnss {
+	status = "okay";
+
+	vddpx-supply = <&pm8953_l5>;
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3680";
+
+	vddxo-supply = <&pm8953_l7>;
+	vddrfa-supply = <&pm8953_l19>;
+	vddpa-supply = <&pm8953_l9>;
+	vdddig-supply = <&pm8953_l5>;
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm670.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm670.dtsi
index ba2043d67370..4d7b77a23159 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -6,6 +6,7 @@
  * Copyright (c) 2022, Richard Acayan. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -400,6 +401,30 @@
 		};
 	};
 
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-180000000 {
+			opp-hz = /bits/ 64 <180000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -1295,10 +1320,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -1353,6 +1378,273 @@
 			#interrupt-cells = <4>;
 		};
 
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sdm670-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x880 0x8>,
+				 <&apps_smmu 0xc80 0x8>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sdm670-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-430000000 {
+						opp-hz = /bits/ 64 <430000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96a00 0 0x10e>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sdm845-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_link_clk_divsel_ten",
+				      "dp_vco_divided_clk_src_mux";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x80000>;
@@ -1532,7 +1824,7 @@
 		};
 
 		cpufreq_hw: cpufreq@17d43000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sdm670-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
 			reg-names = "freq-domain0", "freq-domain1";
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 9fbfb859b1d6..97ff50ac82fe 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -67,8 +67,8 @@
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
 			default-state = "off";
+			panic-indicator;
 		};
 
 		led-1 {
@@ -1130,7 +1130,7 @@
 	vdd-rx-supply = <&vreg_s4a_1p8>;
 	vdd-io-supply = <&vreg_s4a_1p8>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,1 {
 			compatible = "sdw10217201000";
 			reg = <0 1>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 068f3c134e7a..b8bcb5fa16fe 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
@@ -484,6 +485,28 @@
 	status = "okay";
 };
 
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &q6afedai {
 	qi2s@22 {
 		reg = <22>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
index c15d48860646..6172cd1539e6 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
@@ -54,7 +54,7 @@
 				reg = <0x42 0x2>;
 			};
 
-			swm: swm@c85 {
+			swm: soundwire@c85 {
 				compatible = "qcom,soundwire-v1.3.0";
 				reg = <0xc85 0x40>;
 				interrupts-extended = <&wcd9340 20>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 0c4022e21705..cf8080b41edc 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -355,6 +355,28 @@
 	status = "okay";
 };
 
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &pm8998_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
index bf5e6eb9d313..c2244824355a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2306,7 +2306,7 @@
 			};
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c00000 0 0x2000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -2405,7 +2405,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c08000 0 0x2000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2565,7 +2565,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_PHY_GDSC>;
@@ -2595,30 +2595,50 @@
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
 				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
-			freq-table-hz =
-				<50000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 150000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>;
+
+			operating-points-v2 = <&ufs_opp_table>;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sdm845-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2626,16 +2646,9 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -3545,11 +3558,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					etf_in: endpoint {
 						remote-endpoint =
 						  <&merge_funnel_out>;
@@ -4000,33 +4010,28 @@
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x18c>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x128>,
-				      <0 0x088eb400 0 0x1fc>,
-				      <0 0x088eb800 0 0x218>,
-				      <0 0x088eb600 0 0x70>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		usb_1: usb@a6f8800 {
@@ -4053,10 +4058,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -4104,10 +4109,10 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -4126,7 +4131,7 @@
 				iommus = <&apps_smmu 0x760 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -5088,7 +5093,7 @@
 			compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
 			reg = <0 0x17980000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		apss_shared: mailbox@17990000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 49ec09e2214a..9a80b455e5f4 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -392,6 +392,8 @@
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
+
+		wakeup-source;
 	};
 };
 
@@ -408,6 +410,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_hid_active>;
+
+		wakeup-source;
 	};
 };
 
@@ -482,6 +486,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c11_hid_active>;
+
+		wakeup-source;
 	};
 };
 
@@ -797,7 +803,7 @@
 	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index b32b83810c81..6c8d48ea2eaf 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -658,7 +658,7 @@
 	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdx75-idp.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index a14e0650c4a8..f76e72fb2072 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -250,6 +250,11 @@
 	stdout-path = "serial0:115200n8";
 };
 
+&pm7550ba_eusb2_repeater {
+	vdd18-supply = <&vreg_l5b_1p776>;
+	vdd3-supply = <&vreg_l10b_3p08>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -261,3 +266,27 @@
 &uart1 {
 	status = "okay";
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4b_0p88>;
+	vdda12-supply = <&vreg_l1b_1p2>;
+
+	phys = <&pm7550ba_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4b_0p88>;
+	vdda-pll-supply = <&vreg_l1b_1p2>;
+
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi
index e180aa4023ec..7dbdf8ca6de6 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -8,6 +8,8 @@
 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sdx75-gcc.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sdx75.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -203,6 +205,19 @@
 		};
 	};
 
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sdx75-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+		clocks = <&rpmhcc RPMH_QPIC_CLK>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sdx75-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x0>;
@@ -434,6 +449,9 @@
 			clock-names = "m-ahb",
 				      "s-ahb";
 			iommus = <&apps_smmu 0xe3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -444,6 +462,12 @@
 				reg = <0x0 0x00984000 0x0 0x4000>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-0 = <&qupv3_se1_2uart_active>;
 				pinctrl-1 = <&qupv3_se1_2uart_sleep>;
@@ -453,12 +477,144 @@
 			};
 		};
 
+		usb_hsphy: phy@ff4000 {
+			compatible = "qcom,sdx75-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy";
+			reg = <0x0 0x00ff4000 0x0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@ff6000 {
+			compatible = "qcom,sdx75-qmp-usb3-uni-phy";
+			reg = <0x0 0x00ff6000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB2_CLKREF_EN>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		system_noc: interconnect@1640000 {
+			compatible = "qcom,sdx75-system-noc";
+			reg = <0x0 0x01640000 0x0 0x4b400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_anoc: interconnect@16c0000 {
+			compatible = "qcom,sdx75-pcie-anoc";
+			reg = <0x0 0x016c0000 0x0 0x14200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
 			#hwlock-cells = <1>;
 		};
 
+		usb: usb@a6f8800 {
+			compatible = "qcom,sdx75-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 10 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_GDSC>;
+
+			resets = <&gcc GCC_USB30_BCR>;
+
+			interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &system_noc SLAVE_USB3 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			status = "disabled";
+
+			usb_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x80 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_hsphy>,
+				       <&usb_qmpphy>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sdx75-pdc", "qcom,pdc";
 			reg = <0x0 0xb220000 0x0 0x30000>,
@@ -733,6 +889,20 @@
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
 		};
+
+		dc_noc: interconnect@190e0000 {
+			compatible = "qcom,sdx75-dc-noc";
+			reg = <0x0 0x190e0000 0x0 0x8200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,sdx75-gem-noc";
+			reg = <0x0 0x19100000 0x0 0x34080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
 	};
 
 	timer {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm4450-qrd.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
index 00a1c81ca397..866e93783590 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
@@ -10,9 +10,23 @@
 	model = "Qualcomm Technologies, Inc. SM4450 QRD";
 	compatible = "qcom,sm4450-qrd", "qcom,sm4450";
 
-	aliases { };
+	aliases {
+		serial0 = &uart7;
+	};
 
 	chosen {
-		bootargs = "console=hvc0";
+		stdout-path = "serial0:115200n8";
 	};
 };
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>; /* NFC eSE SPI */
+};
+
+&uart7 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi
index c4e5b33f5169..3e7ae3bebbe0 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -3,8 +3,11 @@
  * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm4450-gcc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -328,6 +331,18 @@
 		};
 	};
 
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_cmd_db_mem: cmd-db@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -335,6 +350,43 @@
 		dma-ranges = <0 0 0 0 0x10 0>;
 		compatible = "simple-bus";
 
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm4450-gcc";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			uart7: serial@a88000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -351,6 +403,32 @@
 			interrupt-controller;
 		};
 
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm4450-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 137>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio23";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio22";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		intc: interrupt-controller@17200000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
@@ -419,6 +497,35 @@
 				status = "disabled";
 			};
 		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			label = "apps_rsc";
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm4450-rpmh-clk";
+				#clock-cells = <1>;
+				clocks = <&xo_board>;
+				clock-names = "xo";
+			};
+		};
+
 	};
 
 	timer {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 839c60351240..f9849b8befbf 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
+#include <dt-bindings/interconnect/qcom,sm6115.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
@@ -264,6 +266,8 @@
 		scm: scm {
 			compatible = "qcom,scm-sm6115", "qcom,scm";
 			#reset-cells = <1>;
+			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
 		};
 	};
 
@@ -273,6 +277,25 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -859,6 +882,43 @@
 			status = "disabled";
 		};
 
+		system_noc: interconnect@1880000 {
+			compatible = "qcom,sm6115-snoc";
+			reg = <0x0 0x01880000 0x0 0x5f080>;
+			clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&rpmcc RPM_SMD_IPA_CLK>;
+			clock-names = "cpu_axi",
+				      "ufs_axi",
+				      "usb_axi",
+				      "ipa";
+			#interconnect-cells = <2>;
+
+			clk_virt: interconnect-clk {
+				compatible = "qcom,sm6115-clk-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,sm6115-mmrt-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,sm6115-mmnrt-virt";
+				#interconnect-cells = <2>;
+			};
+		};
+
+		config_noc: interconnect@1900000 {
+			compatible = "qcom,sm6115-cnoc";
+			reg = <0x0 0x01900000 0x0 0x6200>;
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>;
+			clock-names = "usb_axi";
+			#interconnect-cells = <2>;
+		};
+
 		qfprom@1b40000 {
 			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b40000 0x0 0x7000>;
@@ -883,6 +943,60 @@
 			clock-names = "core";
 		};
 
+		pmu@1b8e300 {
+			compatible = "qcom,sm6115-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x01b8e300 0x0 0x600>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&bimc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ACTIVE_TAG>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <(1353 * 4 * 1000)>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+			};
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x01c40000 0x0 0x1100>,
@@ -912,6 +1026,12 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		bimc: interconnect@4480000 {
+			compatible = "qcom,sm6115-bimc";
+			reg = <0x0 0x04480000 0x0 0x80000>;
+			#interconnect-cells = <2>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
@@ -939,8 +1059,42 @@
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
 			clock-names = "iface", "core", "xo", "ice";
 
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			bus-width = <8>;
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <102400 65000>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+			};
 		};
 
 		sdhc_2: mmc@4784000 {
@@ -961,6 +1115,12 @@
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0x00a0 0x0>;
 			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			bus-width = <4>;
 			qcom,dll-config = <0x0007642c>;
@@ -973,11 +1133,15 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <261438 150000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -987,7 +1151,7 @@
 			reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <1>;
 			#reset-cells = <1>;
@@ -1028,24 +1192,17 @@
 
 		ufs_mem_phy: phy@4807000 {
 			compatible = "qcom,sm6115-qmp-ufs-phy";
-			reg = <0x0 0x04807000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x04807000 0x0 0x1000>;
 
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 			clock-names = "ref", "ref_aux";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@4807400 {
-				reg = <0x0 0x04807400 0x0 0x098>,
-				      <0x0 0x04807600 0x0 0x130>,
-				      <0x0 0x04807c00 0x0 0x16c>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		gpi_dma0: dma-controller@4a00000 {
@@ -1091,6 +1248,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1107,6 +1273,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1123,6 +1298,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1139,6 +1323,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1155,6 +1348,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1171,6 +1373,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1187,6 +1398,15 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1203,11 +1423,37 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};
 
+			uart3: serial@4a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				power-domains = <&rpmpd SM6115_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				status = "disabled";
+			};
+
 			i2c4: i2c@4a90000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a90000 0x0 0x4000>;
@@ -1219,6 +1465,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1235,6 +1490,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1246,6 +1510,12 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1260,6 +1530,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1276,6 +1555,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1307,6 +1595,14 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			 /* TODO: USB<->IPA path */
+			interconnects = <&system_noc MASTER_USB3 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
 
@@ -1478,6 +1774,13 @@
 			iommus = <&apps_smmu 0x420 0x2>,
 				 <&apps_smmu 0x421 0x0>;
 
+			interconnects = <&mmrt_virt MASTER_MDP_PORT0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -2566,54 +2869,54 @@
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0 0x0f120000 0x0 0x1000>;
 			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x0 0x0 0x20000000>;
 			clock-frequency = <19200000>;
 
 			frame@f121000 {
-				reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>;
+				reg = <0x0 0x0f121000 0x1000>, <0x0 0x0f122000 0x1000>;
 				frame-number = <0>;
 				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			frame@f123000 {
-				reg = <0x0 0x0f123000 0x0 0x1000>;
+				reg = <0x0 0x0f123000 0x1000>;
 				frame-number = <1>;
 				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f124000 {
-				reg = <0x0 0x0f124000 0x0 0x1000>;
+				reg = <0x0 0x0f124000 0x1000>;
 				frame-number = <2>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f125000 {
-				reg = <0x0 0x0f125000 0x0 0x1000>;
+				reg = <0x0 0x0f125000 0x1000>;
 				frame-number = <3>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f126000 {
-				reg = <0x0 0x0f126000 0x0 0x1000>;
+				reg = <0x0 0x0f126000 0x1000>;
 				frame-number = <4>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f127000 {
-				reg = <0x0 0x0f127000 0x0 0x1000>;
+				reg = <0x0 0x0f127000 0x1000>;
 				frame-number = <5>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f128000 {
-				reg = <0x0 0x0f128000 0x0 0x1000>;
+				reg = <0x0 0x0f128000 0x1000>;
 				frame-number = <6>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
index eb07eca3a48d..1dd3a4056e26 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -1185,6 +1185,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <66666667>;
 
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 8fd6f4d03490..43cffe8e1247 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1142,7 +1142,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -1187,10 +1187,7 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm6350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
 
 			clock-names = "ref",
 				      "ref_aux";
@@ -1200,16 +1197,9 @@
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
-			status = "disabled";
+			#phy-cells = <0>;
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x128>,
-				      <0 0x01d87600 0 0x1fc>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x128>,
-				      <0 0x01d87a00 0 0x1fc>;
-				#phy-cells = <0>;
-			};
+			status = "disabled";
 		};
 
 		ipa: ipa@1e40000 {
@@ -2524,7 +2514,7 @@
 			compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
index 8ebd607d5bfb..7708c014d93b 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -80,6 +80,15 @@
 		};
 	};
 
+	touch_avdd: touch-avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_avdd";
+		gpio = <&tlmm 59 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_avdd_default>;
+		enable-active-high;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -136,9 +145,10 @@
 		interrupts = <22 0x2008>;
 
 		vdd-supply = <&pm6125_l13>;
+		avdd-supply = <&touch_avdd>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_default &ts_avdd_default>;
+		pinctrl-0 = <&ts_int_default>;
 	};
 };
 
@@ -187,6 +197,11 @@
 	status = "okay";
 };
 
+&remoteproc_mss {
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -238,8 +253,8 @@
 		};
 
 		pm6125_l7: l7 {
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <1050000>;
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
 		};
 
 		pm6125_l8: l8 {
@@ -306,7 +321,7 @@
 
 		pm6125_l21: l21 {
 			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-max-microvolt = <3312000>;
 		};
 
 		pm6125_l22: l22 {
@@ -317,7 +332,7 @@
 
 		pm6125_l23: l23 {
 			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-max-microvolt = <3312000>;
 		};
 
 		pm6125_l24: l24 {
@@ -340,8 +355,8 @@
 		};
 
 		pmr735a_l2: l2 {
-			regulator-min-microvolt = <352000>;
-			regulator-max-microvolt = <796000>;
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <640000>;
 		};
 
 		pmr735a_l3: l3 {
@@ -412,7 +427,7 @@
 		pins = "gpio59";
 		function = "gpio";
 		drive-strength = <8>;
-		output-high;
+		output-low;
 	};
 };
 
@@ -425,6 +440,18 @@
 };
 
 &usb_1_hsphy {
+	vdda-pll-supply = <&pm6125_l7>;
+	vdda18-supply = <&pm6125_l10>;
+	vdda33-supply = <&pmr735a_l7>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pmr735a_l2>;
+	vdd-1.8-xo-supply = <&pm6125_l16>;
+	vdd-1.3-rfa-supply = <&pm6125_l2>;
+	vdd-3.3-ch0-supply = <&pm6125_l23>;
+	vdd-3.3-ch1-supply = <&pm6125_l21>;
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi
index e7ff55443da7..7ac8bf26dda3 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -311,6 +311,25 @@
 		};
 	};
 
+	mpm: interrupt-controller {
+		compatible = "qcom,mpm";
+		qcom,rpm-msg-ram = <&apss_mpm>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#power-domain-cells = <0>;
+		interrupt-parent = <&intc>;
+		qcom,mpm-pin-count = <96>;
+		qcom,mpm-pin-map = <5 296>,  /* Soundwire wake_irq */
+				   <12 422>, /* DWC3 ss_phy_irq */
+				   <86 183>, /* MPM wake, SPMI */
+				   <89 314>, /* TSENS0 0C */
+				   <90 315>, /* TSENS1 0C */
+				   <93 164>, /* DWC3 dm_hs_phy_irq */
+				   <94 165>; /* DWC3 dp_hs_phy_irq */
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -486,6 +505,7 @@
 
 		CLUSTER_PD: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
+			power-domains = <&mpm>;
 			domain-idle-states = <&CLUSTER_SLEEP_0>;
 		};
 	};
@@ -808,7 +828,7 @@
 			reg = <0 0x00500000 0 0x800000>;
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&tlmm 0 0 157>;
-			/* TODO: Hook up MPM as wakeup-parent when it's there */
+			wakeup-parent = <&mpm>;
 			interrupt-controller;
 			gpio-controller;
 			#interrupt-cells = <2>;
@@ -896,6 +916,36 @@
 				drive-strength = <6>;
 				bias-disable;
 			};
+
+			qup_uart1_default: qup-uart1-default-state {
+				cts-pins {
+					pins = "gpio61";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				rts-pins {
+					pins = "gpio62";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				tx-pins {
+					pins = "gpio63";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio64";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		gcc: clock-controller@1400000 {
@@ -930,7 +980,7 @@
 			      <0 0x01c0a000 0 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -962,8 +1012,15 @@
 		};
 
 		rpm_msg_ram: sram@45f0000 {
-			compatible = "qcom,rpm-msg-ram";
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
 			reg = <0 0x045f0000 0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
 		};
 
 		sram@4690000 {
@@ -1111,6 +1168,19 @@
 				status = "disabled";
 			};
 
+			uart1: serial@4a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				pinctrl-0 = <&qup_uart1_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
 			i2c2: i2c@4a88000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a88000 0x0 0x4000>;
@@ -1360,10 +1430,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <133333333>;
 
-			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 93 IRQ_TYPE_EDGE_BOTH>,
+					      <&mpm 94 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8150-hdk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index 30e531feda56..187a06434174 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8150.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -54,6 +55,17 @@
 			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -127,8 +139,6 @@
 		vdda_sp_sensor:
 		vdda_ufs_2ln_core_1:
 		vdda_ufs_2ln_core_2:
-		vdda_usb_ss_dp_core_1:
-		vdda_usb_ss_dp_core_2:
 		vdda_qlink_lv:
 		vdda_qlink_lv_ck:
 		vreg_l5a_0p875: ldo5 {
@@ -210,6 +220,12 @@
 			regulator-max-microvolt = <3008000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_l18a_0p8: ldo18 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
 	};
 
 	regulators-1 {
@@ -359,15 +375,210 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
 &gpu {
-	/*
-	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
-	 * after display support is added on this board.
-	 */
-	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
 	status = "okay";
 };
 
+&i2c4 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 152 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pm8150b_typec_sbu_out>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@3b {
+		compatible = "lontium,lt9611";
+		reg = <0x3b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s4a_1p8>;
+		vcc-supply = <&vreg_bob>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lt9611_b: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l5a_0p875>;
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_b>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi1_phy {
+	vdds-supply = <&vreg_l5a_0p875>;
+	status = "okay";
+};
+
+&pm8150b_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <3000000>;
+	status = "okay";
+};
+
+&pm8150b_typec {
+	status = "okay";
+
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "source";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		altmodes {
+			displayport {
+				svid = /bits/ 16 <0xff01>;
+				vdo = <0x00001c46>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pm8150b_role_switch_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pm8150b_typec_mux_in: endpoint {
+					remote-endpoint = <&usb_1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				pm8150b_typec_sbu_out: endpoint {
+					remote-endpoint = <&fsa4480_sbu_mux>;
+				};
+			};
+		};
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -378,6 +589,10 @@
 	linux,code = <KEY_VOLUMEDOWN>;
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -402,6 +617,13 @@
 
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <126 4>;
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio9";
+		function = "gpio";
+		bias-disable;
+	};
+
 };
 
 &uart2 {
@@ -445,13 +667,26 @@
 &usb_1_qmpphy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-pll-supply = <&vreg_l18a_0p8>;
+	orientation-switch;
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pm8150b_typec_mux_in>;
+};
+
+&usb_1_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
 };
 
 &usb_2_qmpphy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-pll-supply = <&vreg_l5a_0p875>;
 };
 
 &usb_1 {
@@ -463,7 +698,16 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 };
 
 &usb_2_dwc3 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 97623af13464..761a6757dc26 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1824,7 +1824,7 @@
 			      <0x0 0x010ad000 0x0 0x3000>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8150";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1878,7 +1878,7 @@
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
@@ -1915,7 +1915,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8150";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1972,7 +1972,7 @@
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
@@ -2016,7 +2016,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2061,10 +2061,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8150-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2074,16 +2072,10 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -2957,11 +2949,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					replicator1_in: endpoint {
 						remote-endpoint = <&replicator_out1>;
 					};
@@ -3447,37 +3436,56 @@
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8150-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x200>,
-				      <0 0x088eb400 0 0x200>,
-				      <0 0x088eb800 0 0x800>,
-				      <0 0x088eb600 0 0x200>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		sdhc_2: mmc@8804000 {
@@ -3565,10 +3573,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3589,6 +3597,25 @@
 				snps,dis_enblslpm_quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
 			};
 		};
 
@@ -3618,10 +3645,10 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3640,7 +3667,7 @@
 				iommus = <&apps_smmu 0x160 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -3719,6 +3746,13 @@
 							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp_in>;
+						};
+					};
 				};
 
 				mdp_opp_table: opp-table {
@@ -3746,6 +3780,86 @@
 				};
 			};
 
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sm8150-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0x0ae90a00 0 0x600>,
+				      <0 0x0ae91000 0 0x600>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SM8250_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp_out: endpoint {
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
@@ -3932,6 +4046,7 @@
 				      "dp_phy_pll_link_clk",
 				      "dp_phy_pll_vco_div_clk";
 			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -4170,7 +4285,7 @@
 			compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 21a7c0e3e5fb..200d386bcbbd 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8250.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -23,7 +24,7 @@
 /delete-node/ &xbl_aop_mem;
 
 / {
-	classis-type = "tablet";
+	chassis-type = "tablet";
 
 	/* required for bootloader to select correct board */
 	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
@@ -114,7 +115,7 @@
 	};
 
 	reserved-memory {
-		xbl_aop_mem: xbl-aop@80700000 {
+		xbl_aop_mem: xbl-aop@80600000 {
 			reg = <0x0 0x80600000 0x0 0x260000>;
 			no-map;
 		};
@@ -627,6 +628,41 @@
 	};
 };
 
+&pm8150b_typec {
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "source";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				pm8150b_role_switch_in: endpoint {
+					remote-endpoint = <&usb_1_role_switch_out>;
+				};
+			};
+		};
+	};
+};
+
+&pm8150b_vbus {
+	status = "okay";
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -664,11 +700,12 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	maximum-speed = "high-speed";
 	/* Remove USB3 phy */
 	phys = <&usb_1_hsphy>;
 	phy-names = "usb2-phy";
+	usb-role-switch;
 };
 
 &usb_1_hsphy {
@@ -678,6 +715,10 @@
 	status = "okay";
 };
 
+&usb_1_role_switch_out {
+	remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
 &ufs_mem_hc {
 	vcc-supply = <&vreg_l17a_3p0>;
 	vcc-max-microamp = <800000>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
new file mode 100644
index 000000000000..36ef4fe3b498
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Copyright (c) 2023 Luka Panio <lukapanio@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/*
+ * Delete following upstream (sm8250.dtsi) reserved
+ * memory mappings which are different on this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_secure_heap;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &xbl_aop_mem;
+
+/ {
+
+	model = "Xiaomi Pad 6";
+	compatible = "xiaomi,pipa", "qcom,sm8250";
+
+	chassis-type = "tablet";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
+	qcom,board-id = <0x34 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			width = <1800>;
+			height = <2880>;
+			stride = <(1800 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	battery_l: battery-l {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16700000>;
+		charge-full-design-microamp-hours = <4420000>;
+	};
+
+	battery_r: battery-r {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16700000>;
+		charge-full-design-microamp-hours = <4420000>;
+	};
+
+	bl_vddpos_5p5: bl-vddpos-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddpos_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	bl_vddneg_5p5: bl-vddneg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddneg_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0x0 0x80600000 0x0 0x260000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x2f00000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8bb00000 {
+			reg = <0x0 0x8bb00000 0x0 0x2500000>;
+			no-map;
+		};
+
+		spss_mem: spss@8e000000 {
+			reg = <0x0 0x8e000000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: cdsp-secure-heap@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x4600000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@b0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xb0000000 0x0 0x400000>;
+			record-size = <0x1000>;
+			console-size = <0x200000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		/* (S1+S2+S3) - cx.lvl (ARC) */
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L7 is unused. */
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L10 is unused, L11 - lcx.lvl (ARC) */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-name = "vreg_l14a_1p88";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L15 & L16 are unused. */
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p35>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		/*
+		 * S1-S6 are ARCs:
+		 * (S1+S2) - gfx.lvl,
+		 * S3 - mx.lvl,
+		 * (S4+S5) - mmcx.lvl,
+		 * S6 - ebi.lvl
+		 */
+
+		vreg_s7c_0p35: smps7 {
+			regulator-name = "vreg_s7c_0p35";
+			regulator-min-microvolt = <348000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p35: smps8 {
+			regulator-name = "vreg_s8c_1p35";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L2-4 are unused. */
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_2p85: ldo7 {
+			regulator-name = "vreg_l7c_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p0: ldo11 {
+			regulator-name = "vreg_l11c_3p0";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p35>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_s1f_1p2: smps1 {
+			regulator-name = "vreg_s1f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2f_0p5: smps2 {
+			regulator-name = "vreg_s2f_0p5";
+			regulator-min-microvolt = <512000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L1 is unused. */
+
+		vreg_l2f_1p3: ldo2 {
+			regulator-name = "vreg_l2f_1p3";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 & L4 are unused. */
+
+		vreg_l5f_2p8: ldo5 {
+			regulator-name = "vreg_l5f_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "/*(DEBLOBBED)*/";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_r>;
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	backlight: backlight@11 {
+		compatible = "kinetic,ktz8866";
+		reg = <0x11>;
+		vddpos-supply = <&bl_vddpos_5p5>;
+		vddneg-supply = <&bl_vddneg_5p5>;
+		enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+		current-num-sinks = <5>;
+		kinetic,current-ramp-delay-ms = <128>;
+		kinetic,led-enable-ramp-delay-ms = <1>;
+		kinetic,enable-lcd-bias;
+	};
+};
+
+&i2c13 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_l>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&pm8150_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
index be970472f6c4..760501c1301a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -671,6 +671,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8250", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
 			#reset-cells = <1>;
 		};
 	};
@@ -2123,7 +2124,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -2227,7 +2228,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2328,7 +2329,7 @@
 			status = "disabled";
 		};
 
-		pcie2: pci@1c10000 {
+		pcie2: pcie@1c10000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c10000 0 0x3000>,
 			      <0 0x64000000 0 0xf1d>,
@@ -2434,7 +2435,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2463,29 +2464,48 @@
 				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-			freq-table-hz =
-				<37500000 300000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
+
+			operating-points-v2 = <&ufs_opp_table>;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-37500000 {
+					opp-hz = /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8250-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -2493,16 +2513,10 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -2543,6 +2557,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8250-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
 		wsamacro: codec@3240000 {
 			compatible = "qcom,sm8250-lpass-wsa-macro";
 			reg = <0 0x03240000 0 0x1000>;
@@ -2565,7 +2584,7 @@
 			status = "disabled";
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			reg = <0 0x03250000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
@@ -2631,7 +2650,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			reg = <0 0x03210000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			status = "disabled";
@@ -2678,7 +2697,7 @@
 		};
 
 		/* tx macro */
-		swr2: soundwire-controller@3230000 {
+		swr2: soundwire@3230000 {
 			reg = <0 0x03230000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
@@ -3095,11 +3114,8 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					tpda_out_funnel_qatb: endpoint {
 						remote-endpoint = <&funnel_qatb_in_tpda>;
 					};
@@ -3142,11 +3158,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_qatb_in_tpda: endpoint {
 						remote-endpoint = <&tpda_out_funnel_qatb>;
 					};
@@ -3355,11 +3367,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					etf_in_funnel_swao_out: endpoint {
 						remote-endpoint = <&funnel_swao_out_etf>;
 					};
@@ -3443,8 +3452,6 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				port {
 					tpdm_mm_out_tpda9: endpoint {
 						remote-endpoint = <&tpda_9_in_tpdm_mm>;
@@ -3710,11 +3717,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_apss_merg_in_funnel_apss: endpoint {
 					remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
 					};
@@ -3889,32 +3892,26 @@
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8250-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x200>,
-				      <0 0x088eb400 0 0x200>,
-				      <0 0x088eb800 0 0x800>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		sdhc_2: mmc@8804000 {
@@ -4141,6 +4138,7 @@
 					  "dp_hs_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
+			wakeup-source;
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
@@ -4209,6 +4207,7 @@
 					  "dp_hs_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
+			wakeup-source;
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
@@ -4223,7 +4222,7 @@
 				iommus = <&apps_smmu 0x20 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -6018,7 +6017,7 @@
 			compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
index b46236235b7f..e78c83a897c2 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -289,6 +289,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8350", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
 			#reset-cells = <1>;
 		};
 	};
@@ -677,9 +678,9 @@
 				 <0>,
 				 <0>,
 				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
 				 <0>;
 		};
@@ -919,9 +920,9 @@
 			};
 		};
 
-		gpi_dma0: dma-controller@9800000 {
+		gpi_dma0: dma-controller@900000 {
 			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
-			reg = <0 0x09800000 0 0x60000>;
+			reg = <0 0x00900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -1498,7 +1499,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8350";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1591,7 +1592,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8350";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1679,7 +1680,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -1723,10 +1724,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -1734,17 +1733,11 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -1818,6 +1811,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8350-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
 		lpass_tlmm: pinctrl@33c0000 {
 			compatible = "qcom,sm8350-lpass-lpi-pinctrl";
 			reg = <0 0x033c0000 0 0x20000>,
@@ -2021,7 +2019,7 @@
 			compatible = "qcom,sm8350-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2063,7 +2061,7 @@
 			compatible = "qcom,sm8350-slpi-pas";
 			reg = <0 0x05c00000 0 0x4000>;
 
-			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2238,34 +2236,27 @@
 			};
 		};
 
-		usb_2_qmpphy: phy-wrapper@88eb000 {
+		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8350-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
+			reg = <0 0x088eb000 0 0x2000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
-
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			usb_2_ssphy: phy@88ebe00 {
-				reg = <0 0x088ebe00 0 0x200>,
-				      <0 0x088ec000 0 0x200>,
-				      <0 0x088eb200 0 0x1100>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 		};
 
 		dc_noc: interconnect@90c0000 {
@@ -2418,7 +2409,7 @@
 				iommus = <&apps_smmu 0x20 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -2453,35 +2444,6 @@
 			#size-cells = <2>;
 			ranges;
 
-			dpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				/* TODO: opp-200000000 should work with
-				 * &rpmhpd_opp_low_svs, but one some of
-				 * sm8350_hdk boards reboot using this
-				 * opp.
-				 */
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-300000000 {
-					opp-hz = /bits/ 64 <300000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-345000000 {
-					opp-hz = /bits/ 64 <345000000>;
-					required-opps = <&rpmhpd_opp_svs_l1>;
-				};
-
-				opp-460000000 {
-					opp-hz = /bits/ 64 <460000000>;
-					required-opps = <&rpmhpd_opp_nom>;
-				};
-			};
-
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8350-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
@@ -2510,6 +2472,35 @@
 				interrupt-parent = <&mdss>;
 				interrupts = <0>;
 
+				dpu_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					/* TODO: opp-200000000 should work with
+					 * &rpmhpd_opp_low_svs, but one some of
+					 * sm8350_hdk boards reboot using this
+					 * opp.
+					 */
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -3207,7 +3198,7 @@
 			compatible = "qcom,sm8350-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3512,7 +3503,7 @@
 			compatible = "qcom,sm8350-cdsp-pas";
 			reg = <0 0x98900000 0 0x1400000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8450-hdk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index e495f39a8f81..e73f38c27c39 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -580,6 +580,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "/*(DEBLOBBED)*/";
+	};
+};
+
 &i2c9 {
 	clock-frequency = <400000>;
 	status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 1783fa78bdbc..01e4dfc4babd 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-camcc.h>
 #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8450-gpucc.h>
 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
@@ -18,6 +19,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sm8450.h>
+#include <dt-bindings/reset/qcom,sm8450-gpucc.h>
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
@@ -754,9 +756,9 @@
 				 <&pcie0_phy>,
 				 <&pcie1_phy>,
 				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo",
 				      "sleep_clk",
@@ -1739,7 +1741,12 @@
 			};
 		};
 
-		pcie0: pci@1c00000 {
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8450-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8450-pcie0";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1848,7 +1855,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8450-pcie1";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2014,6 +2021,206 @@
 			reg = <0x0 0x1fc0000 0x0 0x30000>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-730.1", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-818000000 {
+					opp-hz = /bits/ 64 <818000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-791000000 {
+					opp-hz = /bits/ 64 <791000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-734000000 {
+					opp-hz = /bits/ 64 <734000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-640000000 {
+					opp-hz = /bits/ 64 <640000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-599000000 {
+					opp-hz = /bits/ 64 <599000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-545000000 {
+					opp-hz = /bits/ 64 <545000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-492000000 {
+					opp-hz = /bits/ 64 <492000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-421000000 {
+					opp-hz = /bits/ 64 <421000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+				};
+
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-317000000 {
+					opp-hz = /bits/ 64 <317000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-285000000 {
+					opp-hz = /bits/ 64 <285000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-730.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b290000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8450-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8450-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "gmu",
+				      "hub",
+				      "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sm8450-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
@@ -2149,18 +2356,13 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "wsa2-mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa2_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr4: soundwire-controller@31f0000 {
+		swr4: soundwire@31f0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x031f0000 0 0x2000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2168,6 +2370,9 @@
 			clock-names = "iface";
 			label = "WSA2";
 
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
 
@@ -2197,18 +2402,12 @@
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2218,6 +2417,9 @@
 			qcom,din-ports = <0>;
 			qcom,dout-ports = <5>;
 
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
 			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
@@ -2243,14 +2445,9 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
@@ -2264,18 +2461,12 @@
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03250000 0 0x2000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2283,6 +2474,9 @@
 			clock-names = "iface";
 			label = "WSA";
 
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
 
@@ -2302,17 +2496,20 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@33b0000 {
+		swr2: soundwire@33b0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x033b0000 0 0x2000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wakeup";
 
-			clocks = <&vamacro>;
+			clocks = <&txmacro>;
 			clock-names = "iface";
 			label = "TX";
 
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
 			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
@@ -2339,8 +2536,6 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "mclk", "macro", "dcodec", "npl";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
@@ -4122,7 +4317,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -4171,10 +4366,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8450-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref", "ref_aux", "qref";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
@@ -4182,17 +4375,11 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		ice: crypto@1d88000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index b40d07444dd5..7edf04a0a237 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -10,6 +10,7 @@
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
 #include "pm8550ve.dtsi"
 #include "pm8550vs.dtsi"
 #include "pmk8550.dtsi"
@@ -510,6 +511,134 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p8>;
+		vdd-l6-supply = <&vreg_s6g_1p8>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "/*(DEBLOBBED)*/";
+	};
 };
 
 &i2c_master_hub_0 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 4d9eb4da381d..c8899096e791 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -11,6 +11,7 @@
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
 #include "pm8550ve.dtsi"
 #include "pm8550vs.dtsi"
 #include "pmk8550.dtsi"
@@ -527,6 +528,126 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_s6g_1p86>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &i2c_master_hub_0 {
@@ -585,6 +706,13 @@
 	};
 };
 
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
 &gcc {
 	clocks = <&bi_tcxo_div2>, <&sleep_clk>,
 		 <&pcie0_phy>,
@@ -596,6 +724,14 @@
 		 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "/*(DEBLOBBED)*/";
+	};
+};
+
 &lpass_tlmm {
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio17";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 7b9ddde0b2c9..ee1ba5a8c8fc 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -285,9 +285,9 @@
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <800>;
+				entry-latency-us = <550>;
 				exit-latency-us = <750>;
-				min-residency-us = <4090>;
+				min-residency-us = <6700>;
 				local-timer-stop;
 			};
 
@@ -296,8 +296,18 @@
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
 				entry-latency-us = <600>;
-				exit-latency-us = <1550>;
-				min-residency-us = <4791>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			PRIME_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "goldplus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
 				local-timer-stop;
 			};
 		};
@@ -306,17 +316,17 @@
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
-				entry-latency-us = <1050>;
-				exit-latency-us = <2500>;
-				min-residency-us = <5309>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
 			};
 
 			CLUSTER_SLEEP_1: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c344>;
-				entry-latency-us = <2700>;
-				exit-latency-us = <3500>;
-				min-residency-us = <13959>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
 			};
 		};
 	};
@@ -324,6 +334,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8550", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x19000>;
 			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
 		};
 	};
@@ -400,7 +411,7 @@
 		CPU_PD7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			domain-idle-states = <&PRIME_CPU_SLEEP_0>;
 		};
 
 		CLUSTER_PD: power-domain-cluster {
@@ -1677,7 +1688,12 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8550-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pcie@1c00000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0 0x01c00000 0 0x3000>,
@@ -1768,7 +1784,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0x0 0x01c08000 0x0 0x3000>,
@@ -1979,6 +1995,128 @@
 			#reset-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-43050a01", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x0>,
+				 <&adreno_smmu 1 0x0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			/* Speedbin needs more work on A740+, keep only lower freqs */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-680000000 {
+					opp-hz = /bits/ 64 <680000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-615000000 {
+					opp-hz = /bits/ 64 <615000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-475000000 {
+					opp-hz = /bits/ 64 <475000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+				};
+
+				opp-401000000 {
+					opp-hz = /bits/ 64 <401000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-348000000 {
+					opp-hz = /bits/ 64 <348000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+				};
+
+				opp-295000000 {
+					opp-hz = /bits/ 64 <295000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-740.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b280000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x0>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,sm8550-gpucc";
 			reg = <0 0x03d90000 0 0xa000>;
@@ -1990,6 +2128,89 @@
 			#power-domain-cells = <1>;
 		};
 
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8550-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8550-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
@@ -2040,17 +2261,13 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "wsa2-mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa2_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr3: soundwire-controller@6ab0000 {
+		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2058,6 +2275,9 @@
 			clock-names = "iface";
 			label = "WSA2";
 
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2086,17 +2306,12 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@6ad0000 {
+		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2104,18 +2319,21 @@
 			clock-names = "iface";
 			label = "RX";
 
-			qcom,din-ports = <0>;
-			qcom,dout-ports = <10>;
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <1>;
+			qcom,dout-ports = <11>;
 
-			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
 
 			#address-cells = <2>;
 			#size-cells = <0>;
@@ -2131,14 +2349,9 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
@@ -2151,17 +2364,12 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@6b10000 {
+		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2169,6 +2377,9 @@
 			clock-names = "iface";
 			label = "WSA";
 
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2188,16 +2399,19 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@6d30000 {
+		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wakeup";
-			clocks = <&lpass_vamacro>;
+			clocks = <&lpass_txmacro>;
 			clock-names = "iface";
 			label = "TX";
 
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
 			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
@@ -2224,9 +2438,6 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "mclk", "macro", "dcodec";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
 			#sound-dai-cells = <1>;
@@ -2923,8 +3134,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8650-mtp.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
new file mode 100644
index 000000000000..6e7e1c6bef70
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -0,0 +1,727 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 MTP";
+	compatible = "qcom,sm8650-mtp", "qcom,sm8650";
+
+	aliases {
+		serial0 = &uart15;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3e_0p9>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+	vdda-qref-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio12";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		output-disable;
+		power-source = <1>; /* 1.8 V */
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker Left */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+
+	/* WSA8845, Speaker Right */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_active: mdp-vsync-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_suspend: mdp-vsync-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C
+ * USB SS -> USB-C
+ */
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8650-qrd.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
new file mode 100644
index 000000000000..ca4b8b249874
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
@@ -0,0 +1,811 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 QRD";
+	compatible = "qcom,sm8650-qrd", "qcom,sm8650";
+
+	aliases {
+		serial0 = &uart15;
+		serial1 = &uart14;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		power-source = <1>;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pmk8550_rtc {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&spi4 {
+	status = "okay";
+
+	touchscreen@0 {
+		compatible = "goodix,gt9916";
+		reg = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <162 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
+
+		avdd-supply = <&vreg_l14b_3p2>;
+
+		spi-max-frequency = <1000000>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2400>;
+
+		pinctrl-0 = <&ts_irq>, <&ts_reset>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio18";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_active: mdp-vsync-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_suspend: mdp-vsync-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_irq: ts-irq-state {
+		pins = "gpio161";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-disable;
+	};
+
+	ts_reset: ts-reset-state {
+		pins = "gpio162";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+		vddio-supply = <&vreg_l3c_1p2>;
+		vddaon-supply = <&vreg_l15b_1p8>;
+		vdddig-supply = <&vreg_s3c_0p9>;
+		vddrfa0p8-supply = <&vreg_s3c_0p9>;
+		vddrfa1p2-supply = <&vreg_s1c_1p2>;
+		vddrfa1p9-supply = <&vreg_s6c_1p8>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
+ * USB SS -> NB7VPQ904MMUTWG -> USB-C
+ */
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi
new file mode 100644
index 000000000000..2df77123a8c7
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -0,0 +1,6013 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8650-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8650-tcsr.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sm8650-gpucc.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			#cooling-cells = <2>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0x100>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x200>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x300>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x400>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x500>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			#cooling-cells = <2>;
+
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x600>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			#cooling-cells = <2>;
+
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x4";
+			reg = <0 0x700>;
+
+			clocks = <&cpufreq_hw 2>;
+
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			capacity-dmips-mhz = <1894>;
+			dynamic-power-coefficient = <588>;
+
+			qcom,freq-domain = <&cpufreq_hw 2>;
+
+			#cooling-cells = <2>;
+
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			SILVER_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <550>;
+				exit-latency-us = <750>;
+				min-residency-us = <6700>;
+				local-timer-stop;
+			};
+
+			GOLD_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			GOLD_PLUS_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-plus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8650", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sm8650-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sm8650-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0xa0000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_PLUS_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>,
+					     <&CLUSTER_SLEEP_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@80000000 {
+			reg = <0 0x80000000 0 0xe00000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm@80e00000 {
+			reg = <0 0x80e00000 0 0x400000>;
+			no-map;
+		};
+
+		/* Merged xbl_dtlog, xbl_ramdump and aop_image regions */
+		xbl_dt_log_merged_mem: xbl-dt-log-merged@81a00000 {
+			reg = <0 0x81a00000 0 0x260000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x81c60000 0 0x20000>;
+			no-map;
+		};
+
+		/* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */
+		aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 {
+			reg = <0 0x81c80000 0 0x74000>;
+			no-map;
+		};
+
+		/* Secdata region can be reused by apps */
+
+		smem: smem@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0 0x81d00000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi@81f00000 {
+			reg = <0 0x81f00000 0 0x20000>;
+			no-map;
+		};
+
+		pvmfw_mem: pvmfw@824a0000 {
+			reg = <0 0x824a0000 0 0x100000>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync@82600000 {
+			reg = <0 0x82600000 0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0 0x82700000 0 0x100000>;
+			no-map;
+		};
+
+		qdss_mem: qdss@82800000 {
+			reg = <0 0x82800000 0 0x2000000>;
+			no-map;
+		};
+
+		mpss_dsm_mem: mpss-dsm@86b00000 {
+			reg = <0 0x86b00000 0 0x4900000>;
+			no-map;
+		};
+
+		mpss_dsm_mem_2: mpss-dsm-2@8b400000 {
+			reg = <0 0x8b400000 0 0x800000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8bc00000 {
+			reg = <0 0x8bc00000 0 0xf400000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 {
+			reg = <0 0x9b000000 0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@9b080000 {
+			reg = <0 0x9b080000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@9b090000 {
+			reg = <0 0x9b090000 0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code@9b09a000 {
+			reg = <0 0x9b09a000 0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss@9b0a0000 {
+			reg = <0 0x9b0a0000 0 0x1e0000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: spu-tz-shared@9b280000 {
+			reg = <0 0x9b280000 0 0x60000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: spu-modem-shared@9b2e0000 {
+			reg = <0 0x9b2e0000 0 0x20000>;
+			no-map;
+		};
+
+		camera_mem: camera@9b300000 {
+			reg = <0 0x9b300000 0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video@9bb00000 {
+			reg = <0 0x9bb00000 0 0x800000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@9c300000 {
+			reg = <0 0x9c300000 0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@9ca00000 {
+			reg = <0 0x9ca00000 0 0x1400000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@9de00000 {
+			reg = <0 0x9de00000 0 0x80000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@9de80000 {
+			reg = <0 0x9de80000 0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@9df00000 {
+			reg = <0 0x9df00000 0 0x4080000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@d7c00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xd7c00000 0 0x400000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+
+		/* Merged tz_reserved, xbl_sc, cpucp_fw and qtee regions */
+		tz_merged_mem: tz-merged@d8000000 {
+			reg = <0 0xd8000000 0 0x800000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf@e6440000 {
+			reg = <0 0xe6440000 0 0x2dd000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: trust-ui-vm@f3800000 {
+			reg = <0 0xf3800000 0 0x4400000>;
+			no-map;
+		};
+
+		oem_vm_mem: oem-vm@f7c00000 {
+			reg = <0 0xf7c00000 0 0x4c00000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0 0xff800000 0 0x600000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <435>, <428>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm8650-gcc";
+			reg = <0 0x00100000 0 0x1f4200>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&pcie_1_phy_aux_clk>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
+				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipcc: mailbox@406000 {
+			compatible = "qcom,sm8650-ipcc", "qcom,ipcc";
+			reg = <0 0x00406000 0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0>;
+
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0>;
+
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart14: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			uart15: serial@89c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart15_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+		};
+
+		i2c_master_hub_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-i2c-master-hub";
+			reg = <0 0x009c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
+			clock-names = "s-ahb";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c_hub_0: i2c@980000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00980000 0 0x4000>;
+
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_1: i2c@984000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00984000 0 0x4000>;
+
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_2: i2c@988000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00988000 0 0x4000>;
+
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_3: i2c@98c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0098c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_4: i2c@990000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00990000 0 0x4000>;
+
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_5: i2c@994000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00994000 0 0x4000>;
+
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_6: i2c@998000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00998000 0 0x4000>;
+
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_7: i2c@99c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0099c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_8: i2c@9a0000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a0000 0 0x4000>;
+
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_9: i2c@9a4000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a4000 0 0x4000>;
+
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0xc>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0xb6 0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
+
+			iommus = <&apps_smmu 0xa3 0>;
+
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi7: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,sm8650-cnoc-main";
+			reg = <0 0x01500000 0 0x14080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,sm8650-config-noc";
+			reg = <0 0x01600000 0 0x6200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8650-system-noc";
+			reg = <0 0x01680000 0 0x1d080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sm8650-pcie-anoc";
+			reg = <0 0x016c0000 0 0x12200>;
+
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8650-aggre1-noc";
+			reg = <0 0x016e0000 0 0x16400>;
+
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8650-aggre2-noc";
+			reg = <0 0x01700000 0 0x1e400>;
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,sm8650-mmss-noc";
+			reg = <0 0x01780000 0 0x5b800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8650-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pci@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			iommu-map = <0     &apps_smmu 0x1400 0x1>,
+				    <0x100 &apps_smmu 0x1401 0x1>;
+
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			#interrupt-cells = <1>;
+
+			linux,pci-domain = <0>;
+			num-lanes = <2>;
+			bus-range = <0 0xff>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>,
+				 <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>;
+
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			power-domains = <&gcc PCIE_0_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie1: pci@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>,
+				 <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			iommu-map = <0     &apps_smmu 0x1480 0x1>,
+				    <0x100 &apps_smmu 0x1481 0x1>;
+
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			#interrupt-cells = <1>;
+
+			linux,pci-domain = <1>;
+			num-lanes = <2>;
+			bus-range = <0 0xff>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			dma-coherent;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>,
+				 <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>,
+				 <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
+
+			power-domains = <&gcc PCIE_1_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x28000>;
+
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			#dma-cells = <1>;
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+		};
+
+		ufs_mem_phy: phy@1d80000 {
+			compatible = "qcom,sm8650-qmp-ufs-phy";
+			reg = <0 0x01d80000 0 0x2000>;
+
+			clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref",
+				      "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <100000000 403000000>,
+					<0 0>,
+					<0 0>,
+					<100000000 403000000>,
+					<100000000 403000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x60 0>;
+
+			lanes-per-direction = <2>;
+			qcom,ice = <&ice>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			#reset-cells = <1>;
+
+			status = "disabled";
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8650-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: clock-controller@1fc0000 {
+			compatible = "qcom,sm8650-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0xa0000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8650-gpucc";
+			reg = <0 0x03d90000 0 0xa000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8650-ipa", "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8650-mpss-pas";
+			reg = <0 0x04080000 0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx",
+					     "mss";
+
+			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
+					<&mpss_dsm_mem>, <&mpss_dsm_mem_2>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <1>;
+
+				label = "mpss";
+			};
+		};
+
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06aa0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr3: soundwire@6ab0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ab0000 0 0x10000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,sm8650-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
+			reg = <0 0x06ac0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire@6ad0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ad0000 0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <11>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,sm8650-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
+			reg = <0 0x06ae0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06b00000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire@6b10000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06b10000 0 0x10000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		swr2: soundwire@6d30000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06d30000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+			clocks = <&lpass_txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_vamacro: codec@6d44000 {
+			compatible = "qcom,sm8650-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
+			reg = <0 0x06d44000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@6e80000 {
+			compatible = "qcom,sm8650-lpass-lpi-pinctrl";
+			reg = <0 0x06e80000 0 0x20000>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,sm8650-lpass-lpiaon-noc";
+			reg = <0 0x07400000 0 0x19080>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,sm8650-lpass-lpicx-noc";
+			reg = <0 0x07430000 0 0x3a200>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,sm8650-lpass-ag-noc";
+			reg = <0 0x07e40000 0 0xe080>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			iommus = <&apps_smmu 0x540 0>;
+
+			bus-width = <4>;
+
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8650-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x1c00 0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8650-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupts-extended = <&mdss 0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-514000000 {
+						opp-hz = /bits/ 64 <514000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae95000 {
+				compatible = "qcom,sm8650-dsi-phy-4nm";
+				reg = <0 0x0ae95000 0 0x200>,
+				      <0 0x0ae95200 0 0x280>,
+				      <0 0x0ae95500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae97000 {
+				compatible = "qcom,sm8650-dsi-phy-4nm";
+				reg = <0 0x0ae97000 0 0x200>,
+				      <0 0x0ae97200 0 0x280>,
+				      <0 0x0ae97500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dp0: displayport-controller@af54000 {
+				compatible = "qcom,sm8650-dp";
+				reg = <0 0xaf54000 0 0x104>,
+				      <0 0xaf54200 0 0xc0>,
+				      <0 0xaf55000 0 0x770>,
+				      <0 0xaf56000 0 0x9c>,
+				      <0 0xaf57000 0 0x9c>;
+
+				interrupts-extended = <&mdss 12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				operating-points-v2 = <&dp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8650-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "disabled";
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8650-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x088e3000 0 0x154>;
+
+			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8650-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			power-domains = <&gcc USB3_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&tcsr TCSR_USB3_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+				iommus = <&apps_smmu 0x40 0>;
+
+				phys = <&usb_1_hsphy>,
+				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,usb2-gadget-lpm-disable;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,is-utmi-l1-suspend;
+				snps,usb3_lpm_capable;
+				snps,usb2-lpm-disable;
+				snps,has-lpm-erratum;
+				tx-fifo-resize;
+
+				dma-coherent;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8650-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+			interrupt-parent = <&intc>;
+
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 716 12>,
+					  <138 251 5>, <143 244 4>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c228000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c228000 0 0x1000>, /* TM */
+			      <0 0x0c222000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <15>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c229000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c229000 0 0x1000>, /* TM */
+			      <0 0x0c223000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens2: thermal-sensor@c22a000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c22a000 0 0x1000>, /* TM */
+			      <0 0x0c224000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <13>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c400000 0 0x3000>,
+			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c440000 0 0x80000>,
+			      <0 0x0c4c0000 0 0x20000>,
+			      <0 0x0c42d000 0 0x4000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+
+			interrupt-controller;
+			#interrupt-cells = <4>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8650-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 211>;
+
+			wakeup-parent = <&pdc>;
+
+			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "i2chub0_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c1_data_clk: hub-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio66", "gpio67";
+				function = "i2chub0_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c2_data_clk: hub-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "i2chub0_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c3_data_clk: hub-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio70", "gpio71";
+				function = "i2chub0_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c4_data_clk: hub-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "i2chub0_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c5_data_clk: hub-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio74", "gpio75";
+				function = "i2chub0_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c6_data_clk: hub-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "i2chub0_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c7_data_clk: hub-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio78", "gpio79";
+				function = "i2chub0_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c8_data_clk: hub-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio206", "gpio207";
+				function = "i2chub0_se8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c9_data_clk: hub-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "i2chub0_se9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio94";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio95";
+					function = "pcie0_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio96";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio97";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio98";
+					function = "pcie1_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio99";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio60", "gpio61";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio63";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio60", "gpio61", "gpio62";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio3";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio7";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio11";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio15";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio19";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio23";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio27";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart14_default: qup-uart14-default-state {
+				/* TX, RX */
+				pins = "gpio26", "gpio27";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			qup_uart15_default: qup-uart15-default-state {
+				/* TX, RX */
+				pins = "gpio30", "gpio31";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			dma-coherent;
+		};
+
+		intc: interrupt-controller@17100000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17100000 0 0x10000>,		/* GICD */
+			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17140000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17140000 0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17420000 0 0x1000>;
+
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17a00000 0 0x10000>,
+			      <0 0x17a10000 0 0x10000>,
+			      <0 0x17a20000 0 0x10000>,
+			      <0 0x17a30000 0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&CLUSTER_PD>;
+
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8650-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8650-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>,
+			      <0 0x17d93000 0 0x1000>,
+			      <0 0x17d94000 0 0x1000>;
+			reg-names = "freq-domain0",
+				    "freq-domain1",
+				    "freq-domain2",
+				    "freq-domain3";
+
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2",
+					  "dcvsh-irq-3";
+
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		pmu@24091000 {
+			compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x24091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <6515000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <7980000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <10437000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <12157000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <14060000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <16113000>;
+				};
+			};
+		};
+
+		pmu@240b7400 {
+			compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x240b7400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <4577000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <7110000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <14236000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <16265000>;
+				};
+			};
+		};
+
+		gem_noc: interconnect@24100000 {
+			compatible = "qcom,sm8650-gem-noc";
+			reg = <0 0x24100000 0 0xc5080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,sm8650-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base";
+
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,sm8650-adsp-pas";
+			reg = <0 0x30000000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <2>;
+
+				label = "lpass";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "adsp";
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1043 0x20>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1044 0x20>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1045 0x20>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1046 0x20>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1007 0x40>,
+							 <&apps_smmu 0x1067 0x0>,
+							 <&apps_smmu 0x1087 0x0>;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sm8650-nsp-noc";
+			reg = <0 0x320c0000 0 0xf080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8650-cdsp-pas";
+			reg = <0 0x32300000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP>;
+			power-domain-names = "cx",
+					     "mxc",
+					     "nsp";
+
+			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <5>;
+
+				label = "cdsp";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "cdsp";
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+
+						iommus = <&apps_smmu 0x1961 0x0>,
+							 <&apps_smmu 0x0c01 0x20>,
+							 <&apps_smmu 0x19c1 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+
+						iommus = <&apps_smmu 0x1962 0x0>,
+							 <&apps_smmu 0x0c02 0x20>,
+							 <&apps_smmu 0x19c2 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1963 0x0>,
+							 <&apps_smmu 0x0c03 0x20>,
+							 <&apps_smmu 0x19c3 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1964 0x0>,
+							 <&apps_smmu 0x0c04 0x20>,
+							 <&apps_smmu 0x19c4 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1965 0x0>,
+							 <&apps_smmu 0x0c05 0x20>,
+							 <&apps_smmu 0x19c5 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1966 0x0>,
+							 <&apps_smmu 0x0c06 0x20>,
+							 <&apps_smmu 0x19c6 0x0>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1967 0x0>,
+							 <&apps_smmu 0x0c07 0x20>,
+							 <&apps_smmu 0x19c7 0x0>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+
+						iommus = <&apps_smmu 0x1968 0x0>,
+							 <&apps_smmu 0x0c08 0x20>,
+							 <&apps_smmu 0x19c8 0x0>;
+					};
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-middle-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphvx0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphvx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphvx1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphvx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				video-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				ddr-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 15>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss4-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss4-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss5-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss5-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss6-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss6-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss7-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss7-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/x1e80100-crd.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
new file mode 100644
index 000000000000..7532d8eca2de
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 CRD";
+	compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
new file mode 100644
index 000000000000..a37ad9475c90
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 QCP";
+	compatible = "qcom,x1e80100-qcp", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vph_pwr>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vph_pwr>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <33 3>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi
new file mode 100644
index 000000000000..6f75fc342ceb
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -0,0 +1,3527 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD8>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD9>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU10: cpu@20200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD10>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU11: cpu@20300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD11>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+
+				core1 {
+					cpu = <&CPU9>;
+				};
+
+				core2 {
+					cpu = <&CPU10>;
+				};
+
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CLUSTER_C4: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret";
+				arm,psci-suspend-param = <0x00000004>;
+				entry-latency-us = <180>;
+				exit-latency-us = <320>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_CL4: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "l2-ret";
+				arm,psci-suspend-param = <0x01000044>;
+				entry-latency-us = <350>;
+				exit-latency-us = <500>;
+				min-residency-us = <2500>;
+			};
+
+			CLUSTER_CL5: cluster-sleep-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret-pll-off";
+				arm,psci-suspend-param = <0x01000054>;
+				entry-latency-us = <2200>;
+				exit-latency-us = <2500>;
+				min-residency-us = <7000>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-x1e80100", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,x1e80100-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,x1e80100-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD8: power-domain-cpu8 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD9: power-domain-cpu9 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD10: power-domain-cpu10 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD11: power-domain-cpu11 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CLUSTER_PD0: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+
+		CLUSTER_PD1: power-domain-cpu-cluster1 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+
+		CLUSTER_PD2: power-domain-cpu-cluster2 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gunyah_hyp_mem: gunyah-hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0x800000>;
+			no-map;
+		};
+
+		hyp_elf_package_mem: hyp-elf-package@80800000 {
+			reg = <0x0 0x80800000 0x0 0x200000>;
+			no-map;
+		};
+
+		ncc_mem: ncc@80a00000 {
+			reg = <0x0 0x80a00000 0x0 0x400000>;
+			no-map;
+		};
+
+		cpucp_log_mem: cpucp-log@80e00000 {
+			reg = <0x0 0x80e00000 0x0 0x40000>;
+			no-map;
+		};
+
+		cpucp_mem: cpucp@80e40000 {
+			reg = <0x0 0x80e40000 0x0 0x540000>;
+			no-map;
+		};
+
+		reserved-region@81380000 {
+			reg = <0x0 0x81380000 0x0 0x80000>;
+			no-map;
+		};
+
+		tags_mem: tags-region@81400000 {
+			reg = <0x0 0x81400000 0x0 0x1a0000>;
+			no-map;
+		};
+
+		xbl_dtlog_mem: xbl-dtlog@81a00000 {
+			reg = <0x0 0x81a00000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@81a40000 {
+			reg = <0x0 0x81a40000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@81c00000 {
+			reg = <0x0 0x81c00000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x81c60000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config@81c80000 {
+			reg = <0x0 0x81c80000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: tme-crash-dump@81ca0000 {
+			reg = <0x0 0x81ca0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log@81ce0000 {
+			reg = <0x0 0x81ce0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log@81ce4000 {
+			reg = <0x0 0x81ce4000 0x0 0x10000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss@81cff000 {
+			reg = <0x0 0x81cff000 0x0 0x1000>;
+			no-map;
+		};
+
+		pdp_ns_shared_mem: pdp-ns-shared@81e00000 {
+			reg = <0x0 0x81e00000 0x0 0x100000>;
+			no-map;
+		};
+
+		gpu_prr_mem: gpu-prr@81f00000 {
+			reg = <0x0 0x81f00000 0x0 0x10000>;
+			no-map;
+		};
+
+		tpm_control_mem: tpm-control@81f10000 {
+			reg = <0x0 0x81f10000 0x0 0x10000>;
+			no-map;
+		};
+
+		usb_ucsi_shared_mem: usb-ucsi-shared@81f20000 {
+			reg = <0x0 0x81f20000 0x0 0x10000>;
+			no-map;
+		};
+
+		pld_pep_mem: pld-pep@81f30000 {
+			reg = <0x0 0x81f30000 0x0 0x6000>;
+			no-map;
+		};
+
+		pld_gmu_mem: pld-gmu@81f36000 {
+			reg = <0x0 0x81f36000 0x0 0x1000>;
+			no-map;
+		};
+
+		pld_pdp_mem: pld-pdp@81f37000 {
+			reg = <0x0 0x81f37000 0x0 0x1000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0x0 0x82700000 0x0 0x100000>;
+			no-map;
+		};
+
+		xbl_tmp_buffer_mem: xbl-tmp-buffer@82800000 {
+			reg = <0x0 0x82800000 0x0 0xc00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@84b00000 {
+			reg = <0x0 0x84b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		spu_secure_shared_memory_mem: spu-secure-shared-memory@85300000 {
+			reg = <0x0 0x85300000 0x0 0x80000>;
+			no-map;
+		};
+
+		adsp_boot_dtb_mem: adsp-boot-dtb@866c0000 {
+			reg = <0x0 0x866c0000 0x0 0x40000>;
+			no-map;
+		};
+
+		spss_region_mem: spss-region@86700000 {
+			reg = <0x0 0x86700000 0x0 0x400000>;
+			no-map;
+		};
+
+		adsp_boot_mem: adsp-boot@86b00000 {
+			reg = <0x0 0x86b00000 0x0 0xc00000>;
+			no-map;
+		};
+
+		video_mem: video@87700000 {
+			reg = <0x0 0x87700000 0x0 0x700000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@87e00000 {
+			reg = <0x0 0x87e00000 0x0 0x3a00000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0x80000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@8b900000 {
+			reg = <0x0 0x8b900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@8d900000 {
+			reg = <0x0 0x8d900000 0x0 0x80000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8d9fe000 {
+			reg = <0x0 0x8d9fe000 0x0 0x2000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8da00000 {
+			reg = <0x0 0x8da00000 0x0 0x700000>;
+			no-map;
+		};
+
+		camera_mem: camera@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x800000>;
+			no-map;
+		};
+
+		av1_encoder_mem: av1-encoder@8e900000 {
+			reg = <0x0 0x8e900000 0x0 0x700000>;
+			no-map;
+		};
+
+		reserved-region@8f000000 {
+			reg = <0x0 0x8f000000 0x0 0xa00000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@8fa00000 {
+			reg = <0x0 0x8fa00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		q6_wpss_dtb_mem: q6-wpss-dtb@91300000 {
+			reg = <0x0 0x91300000 0x0 0x80000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc@d8000000 {
+			reg = <0x0 0xd8000000 0x0 0x40000>;
+			no-map;
+		};
+
+		reserved-region@d8040000 {
+			reg = <0x0 0xd8040000 0x0 0xa0000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@d80e0000 {
+			reg = <0x0 0xd80e0000 0x0 0x520000>;
+			no-map;
+		};
+
+		ta_mem: ta@d8600000 {
+			reg = <0x0 0xd8600000 0x0 0x8a00000>;
+			no-map;
+		};
+
+		tags_mem1: tags@e1000000 {
+			reg = <0x0 0xe1000000 0x0 0x26a0000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0x0 0xff800000 0x0 0x600000>;
+			no-map;
+		};
+
+		smem_mem: smem@ffe00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0xffe00000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,x1e80100-gcc";
+			reg = <0 0x00100000 0 0x200000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c16: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c16_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi16: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c17: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c17_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi17: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c18: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c18_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi18: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c19: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c19_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi19: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c20: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c20_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi20: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c21: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c21_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi21: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart21: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart21_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			i2c22: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c22_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi22: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c23: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c23_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi23: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 777 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 779 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x136 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x123 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma0: dma-controller@b00000  {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00b00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x456 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_0: geniqup@bc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00bc0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x443 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@b80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0xb80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@b80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@b84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@b84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@b88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@b88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0xb88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@b8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@b8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@b90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0xb90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@b90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@b94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@b94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@b98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@b98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@b9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi7: spi@b9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,x1e80100-cnoc-main";
+			reg = <0 0x1500000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,x1e80100-cnoc-cfg";
+			reg = <0 0x1600000 0 0x6600>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,x1e80100-system-noc";
+			reg = <0 0x1680000 0 0x1c080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_south_anoc: interconnect@16c0000 {
+			compatible = "qcom,x1e80100-pcie-south-anoc";
+			reg = <0 0x16c0000 0 0xd080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_center_anoc: interconnect@16d0000 {
+			compatible = "qcom,x1e80100-pcie-center-anoc";
+			reg = <0 0x16d0000 0 0x7000>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,x1e80100-aggre1-noc";
+			reg = <0 0x16E0000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,x1e80100-aggre2-noc";
+			reg = <0 0x1700000 0 0x1c400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_north_anoc: interconnect@1740000 {
+			compatible = "qcom,x1e80100-pcie-north-anoc";
+			reg = <0 0x1740000 0 0x9080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_center_anoc: interconnect@1750000 {
+			compatible = "qcom,x1e80100-usb-center-anoc";
+			reg = <0 0x1750000 0 0x8800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_north_anoc: interconnect@1760000 {
+			compatible = "qcom,x1e80100-usb-north-anoc";
+			reg = <0 0x1760000 0 0x7080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_south_anoc: interconnect@1770000 {
+			compatible = "qcom,x1e80100-usb-south-anoc";
+			reg = <0 0x1770000 0 0xf080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,x1e80100-mmss-noc";
+			reg = <0 0x1780000 0 0x5B800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		gem_noc: interconnect@26400000 {
+			compatible = "qcom,x1e80100-gem-noc";
+			reg = <0 0x26400000 0 0x311200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,x1e80100-nsp-noc";
+			reg = <0 0x320C0000 0 0xE080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,x1e80100-lpass-ag-noc";
+			reg = <0 0x7e40000 0 0xE080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,x1e80100-lpass-lpiaon-noc";
+			reg = <0 0x7400000 0 0x19080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,x1e80100-lpass-lpicx-noc";
+			reg = <0 0x7430000 0 0x3A200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,x1e80100-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+			qcom,pdc-ranges = <0 480 42>, <42 251 5>,
+					  <47 522 52>, <99 609 32>,
+					  <131 717 12>, <143 816 19>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,x1e80100-tlmm";
+			reg = <0 0x0f100000 0 0xf00000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 239>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup0_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup0_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup0_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup0_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup0_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup0_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio24", "gpio25";
+				function = "qup0_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio14", "gpio15";
+				function = "qup0_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio54", "gpio55";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c17_data_clk: qup-i2c17-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c18_data_clk: qup-i2c18-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c19_data_clk: qup-i2c19-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c20_data_clk: qup-i2c20-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c21_data_clk: qup-i2c21-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio84", "gpio85";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c22_data_clk: qup-i2c22-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio88", "gpio89";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c23_data_clk: qup-i2c23-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio86", "gpio87";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio3";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio7";
+				function = "qup0_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup0_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio11";
+				function = "qup0_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup0_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio15";
+				function = "qup0_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup0_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio19";
+				function = "qup0_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup0_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio23";
+				function = "qup0_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup0_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio27";
+				function = "qup0_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup0_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio13";
+				function = "qup0_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio14", "gpio15", "gpio12";
+				function = "qup0_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio53";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio54", "gpio55", "gpio52";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi16_cs: qup-spi16-cs-state {
+				pins = "gpio67";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio64", "gpio65", "gpio66";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi17_cs: qup-spi17-cs-state {
+				pins = "gpio71";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi17_data_clk: qup-spi17-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio68", "gpio69", "gpio70";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_cs: qup-spi18-cs-state {
+				pins = "gpio75";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_data_clk: qup-spi18-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio72", "gpio73", "gpio74";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_cs: qup-spi19-cs-state {
+				pins = "gpio79";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_data_clk: qup-spi19-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio76", "gpio77", "gpio78";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_cs: qup-spi20-cs-state {
+				pins = "gpio83";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_data_clk: qup-spi20-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio80", "gpio81", "gpio82";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi21_cs: qup-spi21-cs-state {
+				pins = "gpio87";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi21_data_clk: qup-spi21-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio84", "gpio85", "gpio86";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi22_cs: qup-spi22-cs-state {
+				pins = "gpio91";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi22_data_clk: qup-spi22-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio88", "gpio89", "gpio90";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi23_cs: qup-spi23-cs-state {
+				pins = "gpio85";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi23_data_clk: qup-spi23-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio86", "gpio87", "gpio84";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart21_default: qup-uart21-default-state {
+				/* TX, RX */
+				pins = "gpio86", "gpio87";
+				function = "qup2_se5";
+				drive-strength= <2>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,x1e80100-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+		};
+
+		intc: interrupt-controller@17000000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17000000 0 0x10000>,     /* GICD */
+			      <0 0x17080000 0 0x480000>;    /* GICR * 12 */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17040000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17040000 0 0x40000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17500000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17500000 0 0x10000>,
+			      <0 0x17510000 0 0x10000>,
+			      <0 0x17520000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			qcom,drv-count = <3>;
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,x1e80100-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,x1e80100-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		timer@17800000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17800000 0 0x1000>;
+
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0 0x20000000>;
+
+			frame@17801000 {
+				reg = <0 0x17801000 0x1000>,
+				      <0 0x17802000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@17803000 {
+				reg = <0 0x17803000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@17805000 {
+				reg = <0 0x17805000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@17807000 {
+				reg = <0 0x17807000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@17809000 {
+				reg = <0 0x17809000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1780b000 {
+				reg = <0 0x1780b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1780d000 {
+				reg = <0 0x1780d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,x1e80100-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>,
+			      <0 0x25a00000 0 0x200000>,
+			      <0 0x25c00000 0 0x200000>,
+			      <0 0x25e00000 0 0x200000>,
+			      <0 0x26000000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc4_base",
+				    "llcc5_base",
+				    "llcc6_base",
+				    "llcc7_base",
+				    "llcc_broadcast_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/draak.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/draak.dtsi
index ef3bb835d5c0..6f133f54ded5 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/draak.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -356,12 +356,9 @@
 				 * CVBS and HDMI inputs through SW[49-53]
 				 * switches.
 				 *
-				 * CVBS is the default selection, link it to
-				 * VIN4 here.
+				 * HDMI is the default selection, leave CVBS
+				 * not connected here.
 				 */
-				adv7180_out: endpoint {
-					remote-endpoint = <&vin4_in>;
-				};
 			};
 		};
 
@@ -374,6 +371,12 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -423,13 +426,11 @@
 				 * CVBS and HDMI inputs through SW[49-53]
 				 * switches.
 				 *
-				 * CVBS is the default selection, leave HDMI
-				 * not connected here.
+				 * HDMI is the default selection, link it to
+				 * VIN4 here.
 				 */
 				adv7612_out: endpoint {
-					pclk-sample = <0>;
-					hsync-active = <0>;
-					vsync-active = <0>;
+					remote-endpoint = <&vin4_in>;
 				};
 			};
 		};
@@ -580,8 +581,8 @@
 		function = "usb0";
 	};
 
-	vin4_pins_cvbs: vin4 {
-		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+	vin4_pins: vin4 {
+		groups = "vin4_data24", "vin4_sync", "vin4_clk";
 		function = "vin4";
 	};
 };
@@ -729,7 +730,7 @@
 };
 
 &vin4 {
-	pinctrl-0 = <&vin4_pins_cvbs>;
+	pinctrl-0 = <&vin4_pins>;
 	pinctrl-names = "default";
 
 	status = "okay";
@@ -737,7 +738,10 @@
 	ports {
 		port {
 			vin4_in: endpoint {
-				remote-endpoint = <&adv7180_out>;
+				pclk-sample = <0>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				remote-endpoint = <&adv7612_out>;
 			};
 		};
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/ebisu.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/ebisu.dtsi
index f1a5778ef115..cba2fde9dd36 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/ebisu.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/ebisu.dtsi
@@ -403,6 +403,12 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 405404c0843d..0608dce92e40 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -29,6 +29,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	d1p8: regulator-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3p3: regulator-fixed {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -166,6 +175,12 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 
+		avdd-supply = <&d1p8>;
+		dvdd-supply = <&d1p8>;
+		pvdd-supply = <&d1p8>;
+		dvdd-3v-supply = <&d3p3>;
+		bgvdd-supply = <&d1p8>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
index bb4a5270f71b..913f70fe6c5c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
@@ -187,6 +187,9 @@
 };
 
 &hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/r9a08g045.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
index 6c7b29b69d0e..5facfad96158 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
@@ -96,6 +96,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			interrupt-parent = <&irqc>;
 			gpio-ranges = <&pinctrl 0 0 152>;
 			clocks = <&cpg CPG_MOD R9A08G045_GPIO_HCLK>;
 			power-domains = <&cpg>;
@@ -104,6 +105,73 @@
 				 <&cpg R9A08G045_GPIO_SPARE_RESETN>;
 		};
 
+		irqc: interrupt-controller@11050000 {
+			compatible = "renesas,r9a08g045-irqc", "renesas,rzg2l-irqc";
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0x11050000 0 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nmi",
+					  "irq0", "irq1", "irq2", "irq3",
+					  "irq4", "irq5", "irq6", "irq7",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "bus-err";
+			clocks = <&cpg CPG_MOD R9A08G045_IA55_CLK>,
+				 <&cpg CPG_MOD R9A08G045_IA55_PCLK>;
+			clock-names = "clk", "pclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A08G045_IA55_RESETN>;
+		};
+
 		sdhi0: mmc@11c00000  {
 			compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi";
 			reg = <0x0 0x11c00000 0 0x10000>;
@@ -149,6 +217,44 @@
 			status = "disabled";
 		};
 
+		eth0: ethernet@11c30000 {
+			compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
+				 <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c40000 {
+			compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+			reg = <0 0x11c40000 0 0x10000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A08G045_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A08G045_ETH1_CLK_CHI>,
+				 <&cpg CPG_MOD R9A08G045_ETH1_REFCLK>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A08G045_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@12400000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/r9a09g011.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
index 33f2ecf42441..50ed66d42a24 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
@@ -163,7 +163,7 @@
 		};
 
 		avb: ethernet@a3300000 {
-			compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m";
+			compatible = "renesas,etheravb-r9a09g011", "renesas,etheravb-rzv2m";
 			reg = <0 0xa3300000 0 0x800>;
 			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, /* ch0: Rx0 BE */
 				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, /* ch1: Rx1 NC */
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index 547859c388ce..4409c47239b9 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -312,6 +312,7 @@
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
index 56ff92453976..5e4209d6fb42 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -241,6 +241,7 @@
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
index a199de8f8b02..f062d4ad78b7 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
@@ -9,18 +9,36 @@
 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 
 /*
- * Signals of SW_CONFIG switches:
- * @SW_SD0_DEV_SEL:
- *	0 - SD0 is connected to eMMC
- *	1 - SD0 is connected to uSD0 card
+ * On-board switches' states:
+ * @SW_OFF: switch's state is OFF
+ * @SW_ON:  switch's state is ON
  */
-#define SW_SD0_DEV_SEL	1
+#define SW_OFF		0
+#define SW_ON		1
+
+/*
+ * SW_CONFIG[x] switches' states:
+ * @SW_CONFIG2:
+ *	SW_OFF - SD0 is connected to eMMC
+ *	SW_ON  - SD0 is connected to uSD0 card
+ * @SW_CONFIG3:
+ *	SW_OFF - SD2 is connected to SoC
+ *	SW_ON  - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
+ */
+#define SW_CONFIG2	SW_ON
+#define SW_CONFIG3	SW_ON
 
 / {
 	compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045";
 
 	aliases {
 		mmc0 = &sdhi0;
+#if SW_CONFIG3 == SW_OFF
+		mmc2 = &sdhi2;
+#else
+		eth0 = &eth0;
+		eth1 = &eth1;
+#endif
 	};
 
 	chosen {
@@ -43,7 +61,7 @@
 		enable-active-high;
 	};
 
-#if SW_SD0_DEV_SEL
+#if SW_CONFIG2 == SW_ON
 	vccq_sdhi0: regulator1 {
 		compatible = "regulator-gpio";
 		regulator-name = "SDHI0 VccQ";
@@ -63,13 +81,76 @@
 		regulator-always-on;
 	};
 #endif
+
+	vcc_sdhi2: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+#if SW_CONFIG3 == SW_ON
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@7 {
+		reg = <7>;
+		interrupt-parent = <&pinctrl>;
+		interrupts = <RZG2L_GPIO(12, 0) IRQ_TYPE_EDGE_FALLING>;
+		rxc-skew-psec = <0>;
+		txc-skew-psec = <0>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&eth1 {
+	pinctrl-0 = <&eth1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy1: ethernet-phy@7 {
+		reg = <7>;
+		interrupt-parent = <&pinctrl>;
+		interrupts = <RZG2L_GPIO(12, 1) IRQ_TYPE_EDGE_FALLING>;
+		rxc-skew-psec = <0>;
+		txc-skew-psec = <0>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
 };
+#endif
 
 &extal_clk {
 	clock-frequency = <24000000>;
 };
 
-#if SW_SD0_DEV_SEL
+#if SW_CONFIG2 == SW_ON
 /* SD0 slot */
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
@@ -100,7 +181,100 @@
 };
 #endif
 
+#if SW_CONFIG3 == SW_OFF
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_sdhi2>;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	status = "okay";
+};
+#endif
+
 &pinctrl {
+	eth0-phy-irq-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(12, 0) GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "eth0-phy-irq";
+	};
+
+	eth0_pins: eth0 {
+		txc {
+			pinmux = <RZG2L_PORT_PINMUX(1, 0, 1)>;  /* ET0_TXC */
+			power-source = <1800>;
+			output-enable;
+			input-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		tx_ctl {
+			pinmux = <RZG2L_PORT_PINMUX(1, 1, 1)>;  /* ET0_TX_CTL */
+			power-source = <1800>;
+			output-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(1, 2, 1)>,	/* ET0_TXD0 */
+				 <RZG2L_PORT_PINMUX(1, 3, 1)>,	/* ET0_TXD1 */
+				 <RZG2L_PORT_PINMUX(1, 4, 1)>,	/* ET0_TXD2 */
+				 <RZG2L_PORT_PINMUX(2, 0, 1)>,	/* ET0_TXD3 */
+				 <RZG2L_PORT_PINMUX(3, 0, 1)>,	/* ET0_RXC */
+				 <RZG2L_PORT_PINMUX(3, 1, 1)>,	/* ET0_RX_CTL */
+				 <RZG2L_PORT_PINMUX(3, 2, 1)>,	/* ET0_RXD0 */
+				 <RZG2L_PORT_PINMUX(3, 3, 1)>,	/* ET0_RXD1 */
+				 <RZG2L_PORT_PINMUX(4, 0, 1)>,	/* ET0_RXD2 */
+				 <RZG2L_PORT_PINMUX(4, 1, 1)>,	/* ET0_RXD3 */
+				 <RZG2L_PORT_PINMUX(4, 3, 1)>,	/* ET0_MDC */
+				 <RZG2L_PORT_PINMUX(4, 4, 1)>,	/* ET0_MDIO */
+				 <RZG2L_PORT_PINMUX(4, 5, 1)>;	/* ET0_LINKSTA */
+			power-source = <1800>;
+		};
+	};
+
+	eth1-phy-irq-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(12, 1) GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "eth1-phy-irq";
+	};
+
+	eth1_pins: eth1 {
+		txc {
+			pinmux = <RZG2L_PORT_PINMUX(7, 0, 1)>;	/* ET1_TXC */
+			power-source = <1800>;
+			output-enable;
+			input-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		tx_ctl {
+			pinmux = <RZG2L_PORT_PINMUX(7, 1, 1)>;	/* ET1_TX_CTL */
+			power-source = <1800>;
+			output-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(7, 2, 1)>,	/* ET1_TXD0 */
+				 <RZG2L_PORT_PINMUX(7, 3, 1)>,	/* ET1_TXD1 */
+				 <RZG2L_PORT_PINMUX(7, 4, 1)>,	/* ET1_TXD2 */
+				 <RZG2L_PORT_PINMUX(8, 0, 1)>,	/* ET1_TXD3 */
+				 <RZG2L_PORT_PINMUX(8, 4, 1)>,	/* ET1_RXC */
+				 <RZG2L_PORT_PINMUX(9, 0, 1)>,	/* ET1_RX_CTL */
+				 <RZG2L_PORT_PINMUX(9, 1, 1)>,	/* ET1_RXD0 */
+				 <RZG2L_PORT_PINMUX(9, 2, 1)>,	/* ET1_RXD1 */
+				 <RZG2L_PORT_PINMUX(9, 3, 1)>,	/* ET1_RXD2 */
+				 <RZG2L_PORT_PINMUX(10, 0, 1)>,	/* ET1_RXD3 */
+				 <RZG2L_PORT_PINMUX(10, 2, 1)>,	/* ET1_MDC */
+				 <RZG2L_PORT_PINMUX(10, 3, 1)>,	/* ET1_MDIO */
+				 <RZG2L_PORT_PINMUX(10, 4, 1)>;	/* ET1_LINKSTA */
+			power-source = <1800>;
+		};
+	};
+
 	sdhi0_pins: sd0 {
 		data {
 			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
@@ -139,4 +313,26 @@
 		       "SD0_CLK", "SD0_CMD", "SD0_RST#";
 		power-source = <1800>;
 	};
+
+	sdhi2_pins: sd2 {
+		data {
+			pins = "P11_2", "P11_3", "P12_0", "P12_1";
+			input-enable;
+		};
+
+		ctrl {
+			pins = "P11_1";
+			input-enable;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(11, 0, 8)>, /* SD2_CLK */
+				 <RZG2L_PORT_PINMUX(11, 1, 8)>, /* SD2_CMD */
+				 <RZG2L_PORT_PINMUX(11, 2, 8)>, /* SD2_DATA0 */
+				 <RZG2L_PORT_PINMUX(11, 3, 8)>, /* SD2_DATA1 */
+				 <RZG2L_PORT_PINMUX(12, 0, 8)>, /* SD2_DATA2 */
+				 <RZG2L_PORT_PINMUX(12, 1, 8)>, /* SD2_DATA3 */
+				 <RZG2L_PORT_PINMUX(14, 1, 7)>; /* SD2_CD# */
+		};
+	};
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
index e7073a09ed2e..214520137230 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
@@ -11,6 +11,26 @@
 / {
 	aliases {
 		serial0 = &scif0;
+		mmc1 = &sdhi1;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(4, 2) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
 	};
 };
 
@@ -19,6 +39,38 @@
 		pinmux = <RZG2L_PORT_PINMUX(6, 3, 1)>, /* RXD */
 			 <RZG2L_PORT_PINMUX(6, 4, 1)>; /* TXD */
 	};
+
+	sdhi1_pins: sd1 {
+		data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		cd {
+			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1-uhs {
+		data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		cd {
+			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+		};
+	};
 };
 
 &scif0 {
@@ -26,3 +78,16 @@
 	pinctrl-0 = <&scif0_pins>;
 	status = "okay";
 };
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <125000000>;
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 3885ef3454ff..50de17e4fb3f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -234,6 +234,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 
@@ -294,6 +295,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -314,6 +316,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -324,6 +327,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/Makefile linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/Makefile
index a18f33bf0c0e..a7b30e11beaf 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/Makefile
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
@@ -78,6 +79,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-x55.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
@@ -98,14 +101,17 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
index 3429e124d95a..5b4e22385165 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -7,6 +7,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc1 = &sdmmc;
 		mmc2 = &sdio;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/px30-evb.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/px30-evb.dts
index c1bbd555f5f5..0a90a88fc664 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -14,6 +14,7 @@
 	compatible = "rockchip,px30-evb", "rockchip,px30";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdio;
 		mmc2 = &emmc;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
index 7d4c5324c61b..16798eb77077 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
@@ -13,6 +13,7 @@
 	compatible = "tsd,px30-ringneck-haikou", "rockchip,px30";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc2 = &sdmmc;
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
index 42ce78beb413..9137dd76e72c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -20,7 +20,6 @@
 	#size-cells = <2>;
 
 	aliases {
-		ethernet0 = &gmac;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -632,6 +631,7 @@
 		clock-names = "spiclk", "apb_pclk";
 		dmas = <&dmac 12>, <&dmac 13>;
 		dma-names = "tx", "rx";
+		num-cs = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
 		#address-cells = <1>;
@@ -647,6 +647,7 @@
 		clock-names = "spiclk", "apb_pclk";
 		dmas = <&dmac 14>, <&dmac 15>;
 		dma-names = "tx", "rx";
+		num-cs = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
 		#address-cells = <1>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
index e9810d2f0407..b47fe02c33fb 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
@@ -143,6 +143,68 @@
 	status = "okay";
 };
 
+&gpio0 {
+	gpio-line-names =
+		/* GPIO0_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_B0 - B7 */
+		"", "", "", "header1-pin3 [GPIO0_B3]",
+		"header1-pin5 [GPIO0_B4]", "", "",
+		"header1-pin11 [GPIO0_B7]",
+		/* GPIO0_C0 - C7 */
+		"header1-pin13 [GPIO0_C0]",
+		"header1-pin15 [GPIO0_C1]", "", "", "",
+		"", "", "",
+		/* GPIO0_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* GPIO1_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_C0 - C7 */
+		"", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
+		"header1-pin19 [GPIO1_C7]",
+		/* GPIO1_D0 - D7 */
+		"header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]",
+		"", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* GPIO2_A0 - A7 */
+		"header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]",
+		"", "",
+		"header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
+		"header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
+		/* GPIO2_B0 - B7 */
+		"header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
+		"header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
+		"header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
+		"header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
+		/* GPIO2_C0 - C7 */
+		"header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
+		/* GPIO2_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* GPIO3_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_B0 - B7 */
+		"", "", "header2-pin42 [GPIO3_B2]",
+		"header2-pin41 [GPIO3_B3]", "header2-pin40 [GPIO3_B4]",
+		"header2-pin39 [GPIO3_B5]", "", "",
+		/* GPIO3_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c1 {
 	status = "okay";
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3308.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index 2ae4bb7d5e62..cfc0a87b5195 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -20,6 +20,11 @@
 	#size-cells = <2>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
index 1deef53a4c94..c7b1862fca6a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
@@ -9,6 +9,7 @@
 	compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
 
 	aliases {
+		ethernet0 = &gmac2phy;
 		mmc0 = &sdmmc;
 		mmc1 = &sdio;
 		mmc2 = &emmc;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
index ce318e05f0a6..f4d20f29c1b4 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
@@ -6,30 +6,16 @@
  */
 
 /dts-v1/;
-#include "rk3326-odroid-go.dtsi"
+#include "rk3326-anbernic-rg351m.dtsi"
 
 / {
 	model = "Anbernic RG351M";
 	compatible = "anbernic,rg351m", "rockchip,rk3326";
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm0 0 1000000 0>;
-		pwm-names = "enable";
-	};
 };
 
-/delete-node/ &builtin_gamepad;
-/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
-
 &internal_display {
 	compatible = "elida,kd35t133";
 	iovcc-supply = <&vcc_lcd>;
+	rotation = <270>;
 	vdd-supply = <&vcc_lcd>;
 };
-
-&pwm0 {
-	status = "okay";
-};
-
-/delete-node/ &rk817_charger;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi
new file mode 100644
index 000000000000..b6d041dbed94
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi
@@ -0,0 +1,478 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	/*
+	 * LED is a tri-state. Driven high it is red, driven low it is
+	 * green, and not driven at all (pin set to input) it is amber.
+	 * Additionally, there is a 2nd LED that is not controllable
+	 * that is on (red) when plugged in to power.
+	 */
+	gpio_led: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin>;
+
+		red_green_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CHARGING;
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm0 0 1000000 0>;
+		pwm-names = "enable";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	internal_display: panel@0 {
+		reg = <0>;
+		backlight = <&backlight>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <0>;
+		wakeup-source;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+		vcc8-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1150000>;
+				regulator-min-microvolt = <950000>;
+				regulator-name = "vdd_logic";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1350000>;
+				regulator-min-microvolt = <950000>;
+				regulator-name = "vdd_arm";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_3v3";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <1000000>;
+				regulator-name = "vdd_1v0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vccio_sd";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_sd";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_bl";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-max-microvolt = <2800000>;
+				regulator-min-microvolt = <2800000>;
+				regulator-name = "vcc_lcd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc_wifi: LDO_REG9 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_wifi";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			usb_midu: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5400000>;
+				regulator-min-microvolt = <5000000>;
+				regulator-name = "usb_midu";
+			};
+		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	#address-cells = <1>;
+	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+	pinctrl-names = "default";
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		led_pin: led-pin {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts
new file mode 100644
index 000000000000..c79f7a7b38cb
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3326-anbernic-rg351m.dtsi"
+
+/ {
+	model = "Anbernic RG351V";
+	compatible = "anbernic,rg351v", "rockchip,rk3326";
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-vol-down {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-vol-up {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&internal_display {
+	compatible = "anbernic,rg351v-panel", "newvision,nv3051d";
+	vdd-supply = <&vcc_lcd>;
+};
+
+&io_domains {
+	vccio1-supply = <&vccio_sd>;
+};
+
+&vcc_sd {
+	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <1800000>;
+};
+
+&vccio_sd {
+	regulator-max-microvolt = <1800000>;
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-a1.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index 40bf808642b9..824183e515da 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -9,6 +9,7 @@
 	compatible = "azw,beelink-a1", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-evb.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index ff6b466e0e07..1eef5504445f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -11,6 +11,7 @@
 	compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2phy;
 		mmc0 = &sdmmc;
 		mmc1 = &sdio;
 		mmc2 = &emmc;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 1445b879ac7a..a4399da7d8b1 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -14,6 +14,7 @@
 	compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		ethernet1 = &rtl8153;
 		mmc0 = &sdmmc;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
index 5d7d567283e5..4237f2ee8fee 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
@@ -26,9 +26,11 @@
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 
+			motorcomm,auto-sleep-disabled;
 			motorcomm,clk-out-frequency-hz = <125000000>;
 			motorcomm,keep-pll-enabled;
-			motorcomm,auto-sleep-disabled;
+			motorcomm,rx-clk-drv-microamp = <5020>;
+			motorcomm,rx-data-drv-microamp = <5020>;
 
 			pinctrl-0 = <&eth_phy_reset_pin>;
 			pinctrl-names = "default";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
index dc83d74045a3..f20662929c77 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
@@ -15,6 +15,7 @@
 	compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		ethernet1 = &rtl8153;
 		mmc0 = &sdmmc;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 5d5d9574088c..414897a57e75 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -11,6 +11,7 @@
 	compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index 018a3a5075c7..3cda6c627b68 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -21,6 +21,8 @@
 	compatible = "radxa,rockpi-e", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
+		ethernet1 = &gmac2phy;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
@@ -180,6 +182,59 @@
 	status = "okay";
 };
 
+&gpio0 {
+	gpio-line-names =
+		/* GPIO0_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_D0 - D7 */
+		"", "", "", "pin-15 [GPIO0_D3]", "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* GPIO1_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_D0 - D7 */
+		"", "", "", "", "pin-07 [GPIO1_D4]", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* GPIO2_A0 - A7 */
+		"pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]",
+		"pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]",
+		"pin-33 [GPIO2_A6]", "",
+		/* GPIO2_B0 - B7 */
+		"", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]",
+		/* GPIO2_C0 - C7 */
+		"pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]",
+		"pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]",
+		"pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]",
+		/* GPIO2_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* GPIO3_A0 - A7 */
+		"pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]",
+		"", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "",
+		/* GPIO3_B0 - B7 */
+		"pin-24 [GPIO3_B0]", "", "", "", "", "", "", "",
+		/* GPIO3_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c1 {
 	status = "okay";
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 0a27fa5271f5..229fe9da9c2d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -11,6 +11,7 @@
 	compatible = "pine64,rock64", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index cc8209795c3e..7b4c15c4a9c3 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -20,6 +20,10 @@
 	#size-cells = <2>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -27,8 +31,6 @@
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		i2c3 = &i2c3;
-		ethernet0 = &gmac2io;
-		ethernet1 = &gmac2phy;
 	};
 
 	cpus {
@@ -486,7 +488,6 @@
 	pwm3: pwm@ff1b0030 {
 		compatible = "rockchip,rk3328-pwm";
 		reg = <0x0 0xff1b0030 0x0 0x10>;
-		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -916,6 +917,8 @@
 		resets = <&cru SRST_GMAC2IO_A>;
 		reset-names = "stmmaceth";
 		rockchip,grf = <&grf>;
+		tx-fifo-depth = <2048>;
+		rx-fifo-depth = <4096>;
 		snps,txpbl = <0x4>;
 		status = "disabled";
 	};
@@ -938,6 +941,8 @@
 		reset-names = "stmmaceth";
 		phy-mode = "rmii";
 		phy-handle = <&phy>;
+		tx-fifo-depth = <2048>;
+		rx-fifo-depth = <4096>;
 		snps,txpbl = <0x4>;
 		clock_in_out = "output";
 		status = "disabled";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index e47d1398aeca..b48b98c13705 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -9,6 +9,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &emmc;
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
index be06e6e64d18..029b8e22e709 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -12,6 +12,7 @@
 	compatible = "geekbuying,geekbox", "rockchip,rk3368";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &emmc;
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
index 5753e57fd716..8ac8acf4082d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -8,6 +8,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &emmc;
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index 81d1064fdb21..dcee2e28916f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -12,6 +12,7 @@
 	compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3368-r88.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 5589f3db6b36..b16b7ca02379 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -12,6 +12,7 @@
 	compatible = "rockchip,r88", "rockchip,rk3368";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &emmc;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3368.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index a4c5aaf1f457..62af0cb94839 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -19,7 +19,10 @@
 	#size-cells = <2>;
 
 	aliases {
-		ethernet0 = &gmac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
index 6464ef4d113d..173da81fc231 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
@@ -15,6 +15,7 @@
 	compatible = "openailab,eaidk-610", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-evb.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 3d1e126b553f..55eca7a50a1f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -12,6 +12,7 @@
 	compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
index 1ce85a5816e4..30e4879f322c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
@@ -13,6 +13,10 @@
 	model = "96boards RK3399 Ficus";
 	compatible = "vamrs,ficus", "rockchip,rk3399";
 
+	aliases {
+		ethernet0 = &gmac;
+	};
+
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index c5db64f3e124..260415d99aeb 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -16,6 +16,7 @@
 	compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
index 0f9cc042d9bf..1cba1d857c96 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
@@ -70,7 +70,7 @@
 &spi0 {
 	status = "okay";
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupt-parent = <&gpio0>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index c5e7de60c121..5846a11f0e84 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -706,7 +706,7 @@ camera: &i2c7 {
 &spi2 {
 	status = "okay";
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index 7af27e8216f1..4a6ab6c2e24c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -11,6 +11,7 @@
 	compatible = "hugsun,x99", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
index 8302e51def52..99ac4ed0f13f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
@@ -10,6 +10,10 @@
 / {
 	model = "Khadas Edge-Captain";
 	compatible = "khadas,edge-captain", "rockchip,rk3399";
+
+	aliases {
+		ethernet0 = &gmac;
+	};
 };
 
 &gmac {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
index f5dcb99dc349..e12e7b4d64ca 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
@@ -10,6 +10,10 @@
 / {
 	model = "Khadas Edge-V";
 	compatible = "khadas,edge-v", "rockchip,rk3399";
+
+	aliases {
+		ethernet0 = &gmac;
+	};
 };
 
 &gmac {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
index 1eb287a3f8c0..9e3aec4440bd 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -19,6 +19,7 @@
 	compatible = "kobol,helios64", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdhci;
 		spi1 = &spi1;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
index a21ac319f809..cb69e2145fa9 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
@@ -15,6 +15,7 @@
 	compatible = "leez,p710", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 7c5f441a2219..b7f1e47978a6 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -18,6 +18,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index dba4d03bfc2b..e7551449e718 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -17,6 +17,7 @@
 	compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 115c14c0a3c6..18a98c4648ea 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "rk3399-puma.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Theobroma Systems RK3399-Q7 SoM";
@@ -18,6 +19,38 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&haikou_keys_pin>;
+		pinctrl-names = "default";
+
+		button-batlow-n {
+			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "BATLOW#";
+			linux,code = <KEY_BATTERY>;
+		};
+
+		button-slp-btn-n {
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
+			label = "SLP_BTN#";
+			linux,code = <KEY_SLEEP>;
+		};
+
+		button-wake-n {
+			gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+			label = "WAKE#";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+
+		switch-lid-btn-n {
+			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "LID_BTN#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
 	leds {
 		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
 
@@ -165,11 +198,8 @@
 };
 
 &pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&haikou_pin_hog>;
-
-	hog {
-		haikou_pin_hog: haikou-pin-hog {
+	buttons {
+		haikou_keys_pin: haikou-keys-pin {
 			rockchip,pins =
 			  /* LID_BTN */
 			  <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
@@ -177,7 +207,7 @@
 			  <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
 			  /* SLP_BTN# */
 			  <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
-			  /* BIOS_DISABLE# */
+			  /* WAKE# */
 			  <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 20e3f41efe97..c08e69391c01 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -9,6 +9,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 	};
 
@@ -119,6 +120,20 @@
 	drive-impedance-ohm = <33>;
 };
 
+&gpio0 {
+	/*
+	 * The BIOS_DISABLE hog is a feedback pin for the actual status of the
+	 * signal. This usually represents the state of a switch on the baseboard.
+	 * The pin has a 10k pull-up resistor connected, so no pull-up setting is needed.
+	 */
+	bios-disable-hog {
+		gpios = <RK_PB0 GPIO_ACTIVE_HIGH>;
+		gpio-hog;
+		input;
+		line-name = "bios_disable";
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
 	assigned-clock-parents = <&clkin_gmac>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index c32913df93c3..ca7a446b6568 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -14,6 +14,7 @@
 	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdhci;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
index 8bfd5f88d1ef..7baf9d1b22fd 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
@@ -15,6 +15,7 @@
 	compatible = "radxa,rock-4c-plus", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index f2279aa6ca9e..281a12180703 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -12,6 +12,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index bca2b50e0a93..f30b82a10ca3 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -11,6 +11,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index e6ac292ce645..b3ef1c85e754 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -12,6 +12,7 @@
 	compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdhci;
 	};
@@ -44,7 +45,7 @@
 	fan0: gpio-fan {
 		#cooling-cells = <2>;
 		compatible = "gpio-fan";
-		gpio-fan,speed-map = <0 0 3000 1>;
+		gpio-fan,speed-map = <0 0>, <3000 1>;
 		gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index da0dfb237f85..6e12c5a920ca 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -19,7 +19,11 @@
 	#size-cells = <2>;
 
 	aliases {
-		ethernet0 = &gmac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -2114,6 +2118,7 @@
 		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&cru ACLK_GPU>;
 		#cooling-cells = <2>;
+		dynamic-power-coefficient = <2640>;
 		power-domains = <&power RK3399_PD_GPU>;
 		status = "disabled";
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 8b8992a8e9c0..8823c924dc1d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -13,6 +13,7 @@
 	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
index 1c6d83b47cd2..6ecdf5d28339 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
@@ -455,7 +455,7 @@
 &pinctrl {
 	leds {
 		sys_led_pin: sys-status-led-pin {
-			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
index 1ead3c5c24b3..0ac64f043b80 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
@@ -5,67 +5,11 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3566-anbernic-rg353x.dtsi"
+#include "rk3566-powkiddy-rk2023.dtsi"
 
 / {
 	model = "RGB30";
 	compatible = "powkiddy,rgb30", "rockchip,rk3566";
-
-	aliases {
-		mmc1 = &sdmmc0;
-		mmc2 = &sdmmc1;
-		mmc3 = &sdmmc2;
-	};
-
-	battery: battery {
-		compatible = "simple-battery";
-		charge-full-design-microamp-hours = <3151000>;
-		charge-term-current-microamp = <300000>;
-		constant-charge-current-max-microamp = <2000000>;
-		constant-charge-voltage-max-microvolt = <4250000>;
-		factory-internal-resistance-micro-ohms = <117000>;
-		voltage-max-design-microvolt = <4172000>;
-		voltage-min-design-microvolt = <3400000>;
-
-		ocv-capacity-celsius = <20>;
-		ocv-capacity-table-0 =  <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
-					<3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
-					<3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
-					<3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
-					<3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
-					<3400000 0>;
-	};
-
-	/*
-	 * Channels reversed for speakers. Headphones automatically switch via hardware when
-	 * detected with no ability to control output in software. Headphones appear to be mono
-	 * (each output channel receives all audio). No microphone support on 3.5mm jack.
-	 */
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "rk817_ext";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphones";
-		simple-audio-card,routing =
-			"Headphones", "HPOL",
-			"Headphones", "HPOR";
-
-		simple-audio-card,codec {
-			sound-dai = <&rk817>;
-		};
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s1_8ch>;
-		};
-	};
-};
-
-/delete-node/ &adc_keys;
-
-&chosen {
-	/delete-property/ stdout-path;
 };
 
 &cru {
@@ -75,87 +19,21 @@
 			       <200000000>, <292500000>;
 };
 
-&gpio_keys_control {
-	button-r1 {
-		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
-		label = "TR";
-		linux,code = <BTN_TR>;
-	};
-
-	button-r2 {
-		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
-		label = "TR2";
-		linux,code = <BTN_TR2>;
-	};
-};
-
-/delete-node/ &{/i2c@fdd40000/regulator@40};
-
-&i2c0 {
-	vdd_cpu: regulator@1c {
-		compatible = "tcs,tcs4525";
-		reg = <0x1c>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1390000>;
-		regulator-name = "vdd_cpu";
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc_sys>;
-		regulator-state-mem {
-			regulator-off-in-suspend;
+&dsi0 {
+	panel: panel@0 {
+		compatible = "powkiddy,rgb30-panel";
+		reg = <0>;
+		backlight = <&backlight>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vcc3v3_lcd0_n>;
+		iovcc-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
 		};
 	};
 };
-
-/*
- * Device has 2 red LEDs instead of an amber and a red. Relabel LEDs as
- * red_led0 and red_led1.
- */
-/delete-node/ &{/pwm-leds/led-1};
-/delete-node/ &{/pwm-leds/led-2};
-
-&leds {
-	red_led0: led-1 {
-		color = <LED_COLOR_ID_RED>;
-		function = LED_FUNCTION_CHARGING;
-		max-brightness = <255>;
-		pwms = <&pwm7 0 25000 0>;
-	};
-
-	red_led1: led-2 {
-		color = <LED_COLOR_ID_RED>;
-		default-state = "off";
-		function = LED_FUNCTION_STATUS;
-		max-brightness = <255>;
-		pwms = <&pwm0 0 25000 0>;
-	};
-};
-
-&panel {
-	compatible = "powkiddy,rgb30-panel";
-	vcc-supply = <&vcc3v3_lcd0_n>;
-	iovcc-supply = <&vcc3v3_lcd0_n>;
-	/delete-property/ vdd-supply;
-};
-
-&pwm5 {
-	status = "disabled";
-};
-
-&rk817 {
-	rk817_charger: charger {
-		monitored-battery = <&battery>;
-		rockchip,resistor-sense-micro-ohms = <10000>;
-		rockchip,sleep-enter-current-microamp = <300000>;
-		rockchip,sleep-filter-current-microamp = <100000>;
-	};
-};
-
-/* There is no UART header visible on the board for this device. */
-&uart2 {
-	status = "disabled";
-};
-
-/delete-node/ &vibrator;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
new file mode 100644
index 000000000000..ba32d0793dca
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-powkiddy-rk2023.dtsi"
+
+/ {
+	model = "RK2023";
+	compatible = "powkiddy,rk2023", "rockchip,rk3566";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			  <200000000>, <115200000>;
+};
+
+&dsi0 {
+	panel: panel@0 {
+		compatible = "powkiddy,rk2023-panel", "newvision,nv3051d";
+		reg = <0>;
+		backlight = <&backlight>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi
new file mode 100644
index 000000000000..0fa8f06f94cd
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi
@@ -0,0 +1,875 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	aliases {
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&adc_mux 0>,
+			      <&adc_mux 1>,
+			      <&adc_mux 2>,
+			      <&adc_mux 3>;
+		pinctrl-0 = <&joy_mux_en>;
+		pinctrl-names = "default";
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	adc_mux: adc-mux {
+		compatible = "io-channel-mux";
+		channels = "left_x", "right_x", "left_y", "right_y";
+		#io-channel-cells = <1>;
+		io-channels = <&saradc 3>;
+		io-channel-names = "parent";
+		mux-controls = <&gpio_mux>;
+		settle-time-us = <100>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3151000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4250000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
+					<3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
+					<3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
+					<3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
+					<3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
+					<3400000 0>;
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-a {
+			gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+			label = "EAST";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-r1 {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+			label = "TR";
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "TR2";
+			linux,code = <BTN_TR2>;
+		};
+
+		button-right {
+			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-up {
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+			label = "WEST";
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-vol-up {
+			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio_mux: mux-controller {
+		compatible = "gpio-mux";
+		mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+			    <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+		#mux-control-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c5>;
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	/*
+	 * Device also includes an always on LED that is wired to the 5V input
+	 * voltage and is on when the device is plugged in.
+	 */
+	leds: pwm-leds {
+		compatible = "pwm-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <255>;
+			pwms = <&pwm6 0 25000 0>;
+		};
+
+		red_led: led-1 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_CHARGING;
+			max-brightness = <255>;
+			pwms = <&pwm7 0 25000 0>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+	};
+
+	/*
+	 * Channels reversed for speakers. Headphones automatically switch via hardware when
+	 * detected with no ability to control output in software. Headphones appear to be mono
+	 * (each output channel receives all audio). No microphone support on 3.5mm jack.
+	 */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphones";
+		simple-audio-card,routing =
+			"Headphones", "HPOL",
+			"Headphones", "HPOR";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&vcc_lcd_h>;
+		pinctrl-names = "default";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_lcd0_n";
+		vin-supply = <&vcc_3v3>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc_sys";
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_wifi";
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-0 = <&hdmitxm0_cec>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <4700000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		rk817_charger: charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+	};
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	pinctrl-names = "default";
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-btns {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins =
+				<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	joy-mux {
+		joy_mux_en: joy-mux-en {
+			rockchip,pins =
+				<0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc3v3-lcd {
+		vcc_lcd_h: vcc-lcd-h {
+			rockchip,pins =
+				<0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wifi {
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc1v8_dvp>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	vqmmc-supply = <&vcca1v8_pmu>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usb_host0_xhci {
+	dr_mode = "peripheral";
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	phy-names = "usb2-phy", "usb3-phy";
+	phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
new file mode 100644
index 000000000000..4786b19fd017
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
@@ -0,0 +1,926 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Powkiddy x55";
+	compatible = "powkiddy,x55", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc2;
+		mmc3 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc_joystick: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 0>, <&saradc 1>,
+			      <&saradc 2>, <&saradc 3>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <4000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4300000>;
+		factory-internal-resistance-micro-ohms = <91000>;
+		voltage-max-design-microvolt = <4138000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>,
+					<4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>,
+					<3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>,
+					<3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>,
+					<3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>,
+					<3400000 0>;
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-a {
+			gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
+			label = "EAST";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-right {
+			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-r1 {
+			gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
+			label = "TR";
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
+			label = "TR2";
+			linux,code = <BTN_TR2>;
+		};
+
+		button-up {
+			gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+			label = "WEST";
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-voldown {
+			gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		red_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		green_led: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+		};
+
+		amber_led: led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CHARGING;
+		};
+
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c5>;
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&hp_det>;
+		pinctrl-names = "default";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_host_en>;
+		pinctrl-names = "default";
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&dcdc_boost>;
+	};
+
+	vcc_lcd: regulator-vcc-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_lcd_en>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_lcd";
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc_sys";
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_wifi";
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <126400000>;
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel: panel@0 {
+		compatible = "powkiddy,x55-panel", "himax,hx8394";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vcc-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-0 = <&hdmitxm0_cec>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-min-microvolt = <4700000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		rk817_charger: charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <150000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+	};
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>,
+		    <&i2s1m0_sdo0>;
+	pinctrl-names = "default";
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-control {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins =
+				<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-leds {
+		led_pins: led-pins {
+			rockchip,pins =
+				<4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hp-detect {
+		hp_det: hp-det {
+			rockchip,pins =
+				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins =
+				<4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vcc-lcd {
+		vcc_lcd_en: vcc-lcd-en {
+			rockchip,pins =
+				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wifi {
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcca1v8_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcca1v8_pmu>;
+	vccio5-supply = <&vcc2v8_dvp>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
+		    <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>,
+		    <&sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>,
+		    <&sdmmc2m1_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc2v8_dvp>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index 854d02b46e6f..59843a7a199c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -31,8 +31,9 @@
 	fan: gpio_fan {
 		compatible = "gpio-fan";
 		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0    0
-				      4500 1>;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<4500 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&fan_en_h>;
 		#cooling-cells = <2>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
index 1b1c67d5b1ef..3ae24e39450a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
@@ -14,6 +14,7 @@
 	compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc1 = &sdmmc0;
 	};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index 938092fce186..63eea27293fe 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -12,6 +12,7 @@
 	compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
 		mmc2 = &sdmmc1;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
index 4e49bebf548b..fdbf1c783242 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
@@ -13,6 +13,10 @@
 	model = "PINE64 RK3566 SOQuartz on Blade carrier board";
 	compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
 
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
 	/* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */
 	vcc3v0_sd: vcc3v0-sd-regulator {
 		compatible = "regulator-fixed";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
index cddf6cd2fecb..6ed3fa4aee34 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
@@ -8,6 +8,10 @@
 	model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
 	compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
 
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
 	/* labeled +12v in schematic */
 	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
index 2208dbfb7f0a..f2095dfa4eaf 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
@@ -8,6 +8,10 @@
 	model = "PINE64 RK3566 SOQuartz on Model A carrier board";
 	compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
 
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
 	/* labeled DCIN_12V in schematic */
 	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
index 63bae36b8f7e..bfb7b952f4c5 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
@@ -12,7 +12,6 @@
 	compatible = "pine64,soquartz", "rockchip,rk3566";
 
 	aliases {
-		ethernet0 = &gmac1;
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
 		mmc2 = &sdmmc1;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
new file mode 100644
index 000000000000..a4946cdc3bb3
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "rk3588-coolpi-cm5.dtsi"
+
+/ {
+	model = "RK3588 CoolPi CM5 EVB";
+	compatible = "coolpi,pi-cm5-evb", "coolpi,pi-cm5", "rockchip,rk3588";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		power-supply = <&vcc12v_dcin>;
+		pwms = <&pwm2 0 25000 0>;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_lcd: vcc3v3-lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lcd";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcdpwr_en>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_usb_host1: vcc5v0_usb_host2: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_pwren>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+/* M.2 E-Key */
+&pcie2x1l1 {
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+/* Standard pcie */
+&pcie3x2 {
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+/* M.2 M-Key ssd */
+&pcie3x4 {
+	num-lanes = <2>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&pinctrl {
+	lcd {
+		lcdpwr_en: lcdpwr-en {
+			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bl_en: bl-en {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		usb_otg_pwren: usb-otg-pwren {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		bt_pwron: bt-pwron {
+			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_clkreq: pcie-clkreq {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_rst: pcie-rst {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wifi_pwron: wifi-pwron {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_wake: pcie-wake {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_usb_host1>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_usb_host2>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
new file mode 100644
index 000000000000..cce1c8e83587
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+	compatible = "coolpi,pi-cm5", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+		serial2 = &uart2;
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_8ch_p0>;
+		label = "rk3588-es8316";
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v85_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vdd_0v85_s0>;
+	};
+
+	avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd1v8_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	avdd0v75_pcie30: avdd0v75-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v75_pcie30";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <750000>;
+		regulator-max-microvolt = <750000>;
+		vin-supply = <&avdd_0v75_s0>;
+	};
+
+	pcie30_avdd1v8: avdd1v8-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	pinctrl-names = "default";
+	rx_delay = <0x00>;
+	tx_delay = <0x43>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@1 {
+		/* YT8531C/H */
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&yt8531_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* ethernet */
+&pcie2x1l2 {
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&yt6801_isolate>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	yt6801 {
+		yt6801_isolate: yt6801-isolate {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	yt8531 {
+		yt8531_rst: yt8531-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_2v0_pldo_s3>;
+		vcc14-supply = <&vcc_2v0_pldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
index b51543892078..be6a4f4f90f6 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
@@ -12,10 +12,6 @@
 	compatible = "edgeble,neural-compute-module-6a-io",
 		     "edgeble,neural-compute-module-6a", "rockchip,rk3588";
 
-	aliases {
-		serial2 = &uart2;
-	};
-
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
index 9933765e4097..070baeb63431 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
@@ -9,13 +9,9 @@
 
 / {
 	model = "Edgeble Neu6B IO Board";
-	compatible = "edgeble,neural-compute-module-6b-io",
+	compatible = "edgeble,neural-compute-module-6a-io",
 		     "edgeble,neural-compute-module-6b", "rockchip,rk3588";
 
-	aliases {
-		serial2 = &uart2;
-	};
-
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
index b9d789d57862..de30c2632b8e 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -16,8 +16,8 @@
 	compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
 
 	aliases {
+		ethernet0 = &gmac0;
 		mmc0 = &sdhci;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -56,6 +56,63 @@
 		};
 	};
 
+	analog-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+		simple-audio-card,name = "RK3588 EVB1 Audio";
+		simple-audio-card,aux-devs = <&amp_headphone>, <&amp_speaker>;
+		simple-audio-card,bitclock-master = <&masterdai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&masterdai>;
+		simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,pin-switches = "Headphones", "Speaker";
+		simple-audio-card,routing =
+			"Speaker Amplifier INL", "LOUT2",
+			"Speaker Amplifier INR", "ROUT2",
+			"Speaker", "Speaker Amplifier OUTL",
+			"Speaker", "Speaker Amplifier OUTR",
+			"Headphones Amplifier INL", "LOUT1",
+			"Headphones Amplifier INR", "ROUT1",
+			"Headphones", "Headphones Amplifier OUTL",
+			"Headphones", "Headphones Amplifier OUTR",
+			"LINPUT1", "Onboard Microphone",
+			"RINPUT1", "Onboard Microphone",
+			"LINPUT2", "Microphone Jack",
+			"RINPUT2", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Microphone", "Onboard Microphone",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+
+		masterdai: simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
+	amp_headphone: headphone-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&headphone_amplifier_en>;
+		sound-name-prefix = "Headphones Amplifier";
+	};
+
+	amp_speaker: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_amplifier_en>;
+		sound-name-prefix = "Speaker Amplifier";
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		power-supply = <&vcc12v_dcin>;
@@ -240,6 +297,32 @@
 	};
 };
 
+&i2c7 {
+	status = "okay";
+
+	es8388: audio-codec@11 {
+		compatible = "everest,es8388";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		AVDD-supply = <&avcc_1v8_codec_s0>;
+		DVDD-supply = <&avcc_1v8_codec_s0>;
+		HPVDD-supply = <&vcc_3v3_s0>;
+		PVDD-supply = <&vcc_3v3_s0>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+};
+
 &mdio0 {
 	rgmii_phy: ethernet-phy@1 {
 		/* RTL8211F */
@@ -273,6 +356,20 @@
 };
 
 &pinctrl {
+	audio {
+		hp_detect: headphone-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		headphone_amplifier_en: headphone-amplifier-en {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		speaker_amplifier_en: speaker-amplifier-en {
+			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	rtl8111 {
 		rtl8111_isolate: rtl8111-isolate {
 			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -351,6 +448,7 @@
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
new file mode 100644
index 000000000000..39d65002add1
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
@@ -0,0 +1,802 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3588-SBC Jaguar";
+	compatible = "tsd,rk3588-jaguar", "rockchip,rk3588";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		/* Can be controlled through SW2 but also GPIO1 on CP2102 on P20 */
+		button-bios-disable {
+			label = "BIOS_DISABLE";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	aliases {
+		ethernet0 = &gmac0;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		rtc0 = &rtc_twi;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	/* DCIN is 12-24V but standard is 12V */
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led1_pin>;
+
+		/* LED1 on PCB */
+		led-1 {
+			gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_AMBER>;
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v2_s3: vcc-1v2-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v2_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* Exposed on P14 and P15 */
+	vcc_2v8_s3: vcc-2v8-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_5v0_usb_a: vcc-5v0-usb-a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_a_vcc";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+		gpio = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v0_usb_c1: vcc-5v0-usb-c1-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_usbc1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v0_usb_c2: vcc-5v0-usb-c2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_usbc2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+		gpio = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc3v3_mdot2: vcc3v3-mdot2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_mdot2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_1v2_s3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_rx_bus2
+		     &gmac0_tx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus
+		     &eth0_pins
+		     &eth_reset>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 100000>;
+
+	status = "okay";
+};
+
+&gpio1 {
+	mdot2e-w-disable1-n-hog {
+		gpios = <RK_PB1 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m.2 E-key W_DISABLE1#";
+		gpio-hog;
+	};
+};
+
+&gpio4 {
+	mdot2e-w-disable2-n-hog {
+		gpios = <RK_PC1 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m.2 E-key W_DISABLE2#";
+		gpio-hog;
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+	};
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rtc_twi: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1m4_xfer>;
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6m4_xfer>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* SE050 Secure Element at 0x48; GPIO1_A4 for enable pin */
+
+	/* Also on 0x55 */
+	eeprom@54 {
+		compatible = "st,24c04", "atmel,24c04";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&vcc_3v3_s3>;
+	};
+};
+
+&i2c8 {
+	pinctrl-0 = <&i2c8m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@6 {
+		/* KSZ9031 or KSZ9131 */
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x6>;
+		clocks = <&cru REFCLKO25M_ETH0_OUT>;
+	};
+};
+
+&pcie2x1l0 {
+	reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; /* WIFI_PERST0# */
+	vpcie3v3-supply = <&vcc3v3_mdot2>;
+	status = "okay";
+};
+
+&pinctrl {
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ethernet {
+		eth_reset: eth-reset {
+			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led1_pin: led1-pin {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
+	supports-cqe;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	broken-cd;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_cmd &sdmmc_clk>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-name = "vcca_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-name = "vdda_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-name = "vcca_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg3 {
+				regulator-name = "vdda_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-name = "vdda_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc_5v0_usb_a>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+/* Mule-ATtiny debug UART; typically baudrate 9600 */
+&uart0 {
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
+
+/* Main debug interface on P20 micro-USB B port and P21 header */
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* RS485 on P19 */
+&uart3 {
+	pinctrl-0 = <&uart3m2_xfer &uart3_rtsn>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* Mule-ATtiny UPDI flashing UART */
+&uart7 {
+	pinctrl-0 = <&uart7m0_xfer>;
+	status = "okay";
+};
+
+/* host0 on P10 USB-A */
+&usb_host0_ehci {
+	status = "okay";
+};
+
+/* host0 on P10 USB-A */
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* host1 on M.2 E-key */
+&usb_host1_ehci {
+	status = "okay";
+};
+
+/* host1 on M.2 E-key */
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
index 97af4f912828..997b516c2533 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
@@ -19,7 +19,6 @@
 	aliases {
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -190,19 +189,19 @@
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
-&cpu_b0{
+&cpu_b0 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
 
-&cpu_b1{
+&cpu_b1 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
 
-&cpu_b2{
+&cpu_b2 {
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
-&cpu_b3{
+&cpu_b3 {
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
@@ -537,13 +536,12 @@
 };
 
 &sdmmc {
-	max-frequency = <200000000>;
-	no-sdio;
-	no-mmc;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	disable-wp;
+	no-mmc;
+	no-sdio;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vccio_sd_s0>;
@@ -570,6 +568,8 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 
+		system-power-controller;
+
 		vcc1-supply = <&vcc4v0_sys>;
 		vcc2-supply = <&vcc4v0_sys>;
 		vcc3-supply = <&vcc4v0_sys>;
@@ -590,7 +590,7 @@
 		#gpio-cells = <2>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
index 298c183d6f4f..3e660ff6cd5f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
@@ -19,7 +19,6 @@
 	aliases {
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	chosen {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
index 5c59f9571dce..87a0abf95f7d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
@@ -17,9 +17,9 @@
 	compatible = "pine64,quartzpro64", "rockchip,rk3588";
 
 	aliases {
+		ethernet0 = &gmac0;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	chosen {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 741f631db345..a0e303c3a1dc 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -14,7 +14,6 @@
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 		mmc2 = &sdio;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -138,6 +137,10 @@
 	status = "okay";
 };
 
+&combphy2_psu {
+	status = "okay";
+};
+
 &cpu_b0 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
@@ -423,6 +426,8 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 
+		system-power-controller;
+
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
 		vcc3-supply = <&vcc5v0_sys>;
@@ -443,7 +448,7 @@
 		#gpio-cells = <2>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 
@@ -765,3 +770,7 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
index d88c0e852356..dc08da518a76 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
@@ -19,8 +19,6 @@
 	aliases {
 		ethernet0 = &gmac1;
 		mmc0 = &sdhci;
-		serial2 = &uart2;
-		serial9 = &uart9;
 	};
 
 	fan: pwm-fan {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
new file mode 100644
index 000000000000..e037bf9db75a
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
@@ -0,0 +1,812 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ * https://cool-pi.com/topic/130/coolpi-4b-product-spec-introduction
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "RK3588S CoolPi 4 Model B";
+	compatible = "coolpi,pi-4b", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_8ch_p0>;
+		label = "rk3588-es8316";
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds>;
+
+		led0: led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-red {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usbdcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usbdcin>;
+	};
+
+	avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v85_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vdd_0v85_s0>;
+	};
+
+	avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd1v8_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	vcc3v3_mipi: vcc3v3-mipi-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_mipi";
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_u3host_en>;
+		regulator-name = "vcc5v0_otg";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6m3_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+	};
+};
+
+&i2c7 {
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtl8111_isolate>;
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	led {
+		gpio_leds: gpio-leds {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>,
+					<0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	rtl8111 {
+		rtl8111_isolate: rtl8111-isolate {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,
+					<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vcc5v0_u3host_en: vcc5v0-u3host-en {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_reset_gpio: bt-reset-pin {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_gpio: bt-wake-pin {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host_irq: bt-wake-host-irq {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	wireless-wlan {
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		wifi_poweren_pin: wifi-poweren-pin {
+			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	pinctrl-0 = <&pwm2m1_pins>;
+	status = "okay";
+};
+
+&pwm13 {
+	pinctrl-names = "active";
+	pinctrl-0 = <&pwm13m2_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <150000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-sd;
+	no-mmc;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdiom1_pins>,<&wifi_poweren_pin>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* bt */
+&uart9 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
index 60f00ceb630e..3c2278886851 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -44,7 +44,6 @@
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 		mmc2 = &sdio;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -196,13 +195,13 @@
 
 &gpio1 {
 	gpio-line-names = /* GPIO1 A0-A7 */
-			  "HEADER_27_3v3", "HEADER_28_3v3", "", "",
+			  "HEADER_27_3v3", "", "", "",
 			  "HEADER_29_1v8", "", "HEADER_7_1v8", "",
 			  /* GPIO1 B0-B7 */
 			  "", "HEADER_31_1v8", "HEADER_33_1v8", "",
 			  "HEADER_11_1v8", "HEADER_13_1v8", "", "",
 			  /* GPIO1 C0-C7 */
-			  "", "", "", "",
+			  "", "HEADER_28_3v3", "", "",
 			  "", "", "", "",
 			  /* GPIO1 D0-D7 */
 			  "", "", "", "",
@@ -226,11 +225,11 @@
 
 &gpio4 {
 	gpio-line-names = /* GPIO4 A0-A7 */
-			  "", "", "HEADER_37_3v3", "HEADER_32_3v3",
-			  "HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3",
+			  "", "", "HEADER_37_3v3", "HEADER_8_3v3",
+			  "HEADER_10_3v3", "", "HEADER_32_3v3", "HEADER_35_3v3",
 			  /* GPIO4 B0-B7 */
 			  "", "", "", "HEADER_40_3v3",
-			  "HEADER_8_3v3", "HEADER_10_3v3", "", "",
+			  "HEADER_38_3v3", "HEADER_36_3v3", "", "",
 			  /* GPIO4 C0-C7 */
 			  "", "", "", "",
 			  "", "", "", "",
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index 82478a452533..f53e993c785e 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -12,7 +12,6 @@
 
 	aliases {
 		mmc0 = &sdhci;
-		serial2 = &uart2;
 	};
 
 	chosen {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
index e3a839a12dc6..25de4362af38 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
@@ -13,8 +13,8 @@
 	compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -314,6 +314,7 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 				<&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
@@ -660,3 +661,7 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index 8347adcbd003..2002fd0221fa 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -12,9 +12,9 @@
 	compatible = "radxa,rock-5a", "rockchip,rk3588s";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	analog-sound {
@@ -114,6 +114,10 @@
 	};
 };
 
+&combphy2_psu {
+	status = "okay";
+};
+
 &cpu_b0 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
@@ -734,3 +738,7 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588s.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 8aa0499f9b03..36b1b7acfe6a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -18,6 +18,38 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial7 = &uart7;
+		serial8 = &uart8;
+		serial9 = &uart9;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -362,6 +394,11 @@
 		#clock-cells = <0>;
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
@@ -474,6 +511,16 @@
 		reg = <0x0 0xfd58c000 0x0 0x1000>;
 	};
 
+	vop_grf: syscon@fd5a4000 {
+		compatible = "rockchip,rk3588-vop-grf", "syscon";
+		reg = <0x0 0xfd5a4000 0x0 0x2000>;
+	};
+
+	vo1_grf: syscon@fd5a8000 {
+		compatible = "rockchip,rk3588-vo-grf", "syscon";
+		reg = <0x0 0xfd5a8000 0x0 0x100>;
+	};
+
 	php_grf: syscon@fd5b0000 {
 		compatible = "rockchip,rk3588-php-grf", "syscon";
 		reg = <0x0 0xfd5b0000 0x0 0x1000>;
@@ -593,6 +640,74 @@
 		status = "disabled";
 	};
 
+	vop: vop@fdd90000 {
+		compatible = "rockchip,rk3588-vop";
+		reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
+		reg-names = "vop", "gamma-lut";
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP>,
+			 <&cru HCLK_VOP>,
+			 <&cru DCLK_VOP0>,
+			 <&cru DCLK_VOP1>,
+			 <&cru DCLK_VOP2>,
+			 <&cru DCLK_VOP3>,
+			 <&cru PCLK_VOP_ROOT>;
+		clock-names = "aclk",
+			      "hclk",
+			      "dclk_vp0",
+			      "dclk_vp1",
+			      "dclk_vp2",
+			      "dclk_vp3",
+			      "pclk_vop";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3588_PD_VOP>;
+		rockchip,grf = <&sys_grf>;
+		rockchip,vop-grf = <&vop_grf>;
+		rockchip,vo1-grf = <&vo1_grf>;
+		rockchip,pmu = <&pmu>;
+		status = "disabled";
+
+		vop_out: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vp0: port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+			};
+
+			vp1: port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+			};
+
+			vp2: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+			};
+
+			vp3: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@fdd97e00 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_VOP>;
+		status = "disabled";
+	};
+
 	uart0: serial@fd890000 {
 		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
 		reg = <0x0 0xfd890000 0x0 0x100>;
@@ -916,6 +1031,7 @@
 				reg = <RK3588_PD_USB>;
 				clocks = <&cru PCLK_PHP_ROOT>,
 					 <&cru ACLK_USB_ROOT>,
+					 <&cru ACLK_USB>,
 					 <&cru HCLK_USB_ROOT>,
 					 <&cru HCLK_HOST0>,
 					 <&cru HCLK_HOST_ARB0>,
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/sprd/Makefile linux-libre-6.8-gnu/arch/arm64/boot/dts/sprd/Makefile
index 97522fb0bf66..3ce81ad7116f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/sprd/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/sprd/Makefile
@@ -2,4 +2,5 @@
 dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
 			sp9860g-1h10.dtb	\
 			sp9863a-1h10.dtb	\
-			ums512-1h10.dtb
+			ums512-1h10.dtb		\
+			ums9620-2h10.dtb
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/sprd/ums512.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/sprd/ums512.dtsi
index 024be594c47d..dbdb79f8e959 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/sprd/ums512.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/sprd/ums512.dtsi
@@ -96,7 +96,7 @@
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a55";
+			compatible = "arm,cortex-a75";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
 			cpu-idle-states = <&CORE_PD>;
@@ -104,7 +104,7 @@
 
 		CPU7: cpu@700 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a55";
+			compatible = "arm,cortex-a75";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
 			cpu-idle-states = <&CORE_PD>;
@@ -113,7 +113,7 @@
 
 	idle-states {
 		entry-method = "psci";
-		CORE_PD: core-pd {
+		CORE_PD: cpu-pd {
 			compatible = "arm,idle-state";
 			entry-latency-us = <4000>;
 			exit-latency-us = <4000>;
@@ -291,6 +291,7 @@
 			pll2: clock-controller@0 {
 				compatible = "sprd,ums512-gc-pll";
 				reg = <0x0 0x100>;
+				clocks = <&ext_26m>;
 				clock-names = "ext-26m";
 				#clock-cells = <1>;
 			};
@@ -682,8 +683,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f040000 0 0x1000>;
 			cpu = <&CPU0>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -699,8 +700,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f140000 0 0x1000>;
 			cpu = <&CPU1>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -716,8 +717,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f240000 0 0x1000>;
 			cpu = <&CPU2>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -733,8 +734,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f340000 0 0x1000>;
 			cpu = <&CPU3>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -750,8 +751,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f440000 0 0x1000>;
 			cpu = <&CPU4>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -767,8 +768,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f540000 0 0x1000>;
 			cpu = <&CPU5>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -784,8 +785,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f640000 0 0x1000>;
 			cpu = <&CPU6>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -801,8 +802,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f740000 0 0x1000>;
 			cpu = <&CPU7>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/sprd/ums9620-2h10.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/sprd/ums9620-2h10.dts
new file mode 100644
index 000000000000..b35671192a72
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/sprd/ums9620-2h10.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS9620-2h10 board DTS file
+ *
+ * Copyright (C) 2023, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "ums9620.dtsi"
+
+/ {
+	model = "Unisoc UMS9620-2H10 Board";
+
+	compatible = "sprd,ums9620-2h10", "sprd,ums9620";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/sprd/ums9620.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/sprd/ums9620.dtsi
new file mode 100644
index 000000000000..2191f0a4811b
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/sprd/ums9620.dtsi
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS9620 DTS file
+ *
+ * Copyright (C) 2023, Unisoc Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+		LIT_CORE_PD: cpu-pd-lit {
+			compatible = "arm,idle-state";
+			entry-latency-us = <1000>;
+			exit-latency-us = <500>;
+			min-residency-us = <2500>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+
+		BIG_CORE_PD: cpu-pd-big {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gic: interrupt-controller@12000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x12000000 0 0x20000>,	/* GICD */
+			      <0x0 0x12040000 0 0x100000>;	/* GICR */
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apb@20200000 {
+			compatible = "simple-bus";
+			ranges = <0 0 0x20200000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uart0: serial@0 {
+				compatible = "sprd,ums9620-uart",
+					     "sprd,sc9836-uart";
+				reg = <0 0x100>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@10000 {
+				compatible = "sprd,ums9620-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x10000 0x100>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ext_26m: clk-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_4m: clk-4m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+		clock-output-names = "ext-4m";
+	};
+
+	ext_32k: clk-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	rco_100m: clk-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "rco-100m";
+	};
+
+	dphy_312m5: dphy-312m5 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <312500000>;
+		clock-output-names = "dphy-312m5";
+	};
+
+	dphy_416m7: dphy-416m7 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <416700000>;
+		clock-output-names = "dphy-416m7";
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/st/stm32mp251.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 124403f5f1f4..96859d098ef8 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -140,6 +140,22 @@
 			};
 		};
 
+		bsec: efuse@44000000 {
+			compatible = "st,stm32mp25-bsec";
+			reg = <0x44000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			part_number_otp@24 {
+				reg = <0x24 0x4>;
+			};
+
+			package_otp@1e8 {
+				reg = <0x1e8 0x1>;
+				bits = <0 3>;
+			};
+		};
+
 		syscfg: syscon@44230000 {
 			compatible = "st,stm32mp25-syscfg", "syscon";
 			reg = <0x44230000 0x10000>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/tesla/fsd.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/tesla/fsd.dtsi
index bb50a9f7db4a..aaffb50b8b60 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/tesla/fsd.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -342,6 +342,18 @@
 		#clock-cells = <0>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		mfc_left: region@84000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0 0x84000000 0 0x8000000>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -581,7 +593,7 @@
 		};
 
 		serial_0: serial@14180000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "tesla,fsd-uart", "samsung,exynos4210-uart";
 			reg = <0x0 0x14180000 0x0 0x100>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 1>, <&pdma1 0>;
@@ -593,7 +605,7 @@
 		};
 
 		serial_1: serial@14190000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "tesla,fsd-uart", "samsung,exynos4210-uart";
 			reg = <0x0 0x14190000 0x0 0x100>;
 			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 3>, <&pdma1 2>;
@@ -605,12 +617,12 @@
 		};
 
 		pmu_system_controller: system-controller@11400000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "tesla,fsd-pmu", "samsung,exynos7-pmu", "syscon";
 			reg = <0x0 0x11400000 0x0 0x5000>;
 		};
 
 		watchdog_0: watchdog@100a0000 {
-			compatible = "samsung,exynos7-wdt";
+			compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
 			reg = <0x0 0x100a0000 0x0 0x100>;
 			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -619,7 +631,7 @@
 		};
 
 		watchdog_1: watchdog@100b0000 {
-			compatible = "samsung,exynos7-wdt";
+			compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
 			reg = <0x0 0x100b0000 0x0 0x100>;
 			interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -628,7 +640,7 @@
 		};
 
 		watchdog_2: watchdog@100c0000 {
-			compatible = "samsung,exynos7-wdt";
+			compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
 			reg = <0x0 0x100c0000 0x0 0x100>;
 			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -637,7 +649,7 @@
 		};
 
 		pwm_0: pwm@14100000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm";
 			reg = <0x0 0x14100000 0x0 0x100>;
 			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 			#pwm-cells = <3>;
@@ -647,7 +659,7 @@
 		};
 
 		pwm_1: pwm@14110000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm";
 			reg = <0x0 0x14110000 0x0 0x100>;
 			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 			#pwm-cells = <3>;
@@ -657,7 +669,7 @@
 		};
 
 		hsi2c_0: i2c@14200000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14200000 0x0 0x1000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -670,7 +682,7 @@
 		};
 
 		hsi2c_1: i2c@14210000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14210000 0x0 0x1000>;
 			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -683,7 +695,7 @@
 		};
 
 		hsi2c_2: i2c@14220000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14220000 0x0 0x1000>;
 			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -696,7 +708,7 @@
 		};
 
 		hsi2c_3: i2c@14230000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14230000 0x0 0x1000>;
 			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -709,7 +721,7 @@
 		};
 
 		hsi2c_4: i2c@14240000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14240000 0x0 0x1000>;
 			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -722,7 +734,7 @@
 		};
 
 		hsi2c_5: i2c@14250000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14250000 0x0 0x1000>;
 			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -735,7 +747,7 @@
 		};
 
 		hsi2c_6: i2c@14260000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14260000 0x0 0x1000>;
 			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -748,7 +760,7 @@
 		};
 
 		hsi2c_7: i2c@14270000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14270000 0x0 0x1000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -956,6 +968,15 @@
 			clock-names = "fin_pll", "mct";
 		};
 
+		mfc: mfc@12880000 {
+			compatible = "tesla,fsd-mfc";
+			reg = <0x0 0x12880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "mfc";
+			clocks = <&clock_mfc MFC_MFC_IPCLKPORT_ACLK>;
+			memory-region = <&mfc_left>;
+		};
+
 		ufs: ufs@15120000 {
 			compatible = "tesla,fsd-ufs";
 			reg = <0x0 0x15120000 0x0 0x200>,  /* 0: HCI standard */
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/Makefile linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/Makefile
index 77a347f9f47d..52c1dc910308 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/Makefile
@@ -9,20 +9,20 @@
 # alphabetically.
 
 # Boards with AM62x SoC
-k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
-k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-ov5640.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
-dtb-$(CONFIG_ARCH_K3) += k3-am625-sk-hdmi-audio.dtb
-dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-hdmi-audio.dtb
 
 # Boards with AM62Ax SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
@@ -30,19 +30,19 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
 # Boards with AM62Px SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
 
+# Common overlays for SK-AM62* family of boards
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-ov5640.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-tevi-ov5640.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-imx219.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo
+
 # Boards with AM64x SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
-
-k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
-	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
-k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
-	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
-
-dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb
-dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
 
 # Boards with AM65x SoC
 k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
@@ -67,6 +67,7 @@ k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-e
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
 
 # Boards with J721s2 SoC
@@ -75,14 +76,59 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
 k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo
 
 # Boards with J784s4 SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
 
+# Build time test only, enabled by CONFIG_OF_ALL_DTBS
+k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
+	k3-am625-beagleplay-csi2-ov5640.dtbo
+k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \
+	k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
+k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \
+	k3-am62x-sk-csi2-imx219.dtbo
+k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \
+	k3-am62x-sk-csi2-ov5640.dtbo
+k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \
+	k3-am62x-sk-csi2-tevi-ov5640.dtbo
+k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am62a7-sk-csi2-imx219-dtbs := k3-am62a7-sk.dtb \
+	k3-am62x-sk-csi2-imx219.dtbo
+k3-am62a7-sk-csi2-ov5640-dtbs := k3-am62a7-sk.dtb \
+	k3-am62x-sk-csi2-ov5640.dtbo
+k3-am62a7-sk-csi2-tevi-ov5640-dtbs := k3-am62a7-sk.dtb \
+	k3-am62x-sk-csi2-tevi-ov5640.dtbo
+k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
+	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
+k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
+	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
+k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \
+	k3-j721e-evm-pcie0-ep.dtbo
+k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
+	k3-j721s2-evm-pcie1-ep.dtbo
+dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
+	k3-am625-beagleplay-csi2-tevi-ov5640.dtb \
+	k3-am625-sk-csi2-imx219.dtb \
+	k3-am625-sk-csi2-ov5640.dtb \
+	k3-am625-sk-csi2-tevi-ov5640.dtb \
+	k3-am625-sk-hdmi-audio.dtb \
+	k3-am62-lp-sk-hdmi-audio.dtb \
+	k3-am62a7-sk-csi2-imx219.dtb \
+	k3-am62a7-sk-csi2-ov5640.dtb \
+	k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \
+	k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
+	k3-j721e-evm-pcie0-ep.dtb \
+	k3-j721s2-evm-pcie1-ep.dtb
+
 # Enable support for device-tree overlays
+DTC_FLAGS_k3-am625-beagleplay += -@
 DTC_FLAGS_k3-am625-sk += -@
 DTC_FLAGS_k3-am62-lp-sk += -@
+DTC_FLAGS_k3-am62a7-sk += -@
+DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@
 DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
 DTC_FLAGS_k3-j721e-common-proc-board += -@
 DTC_FLAGS_k3-j721s2-common-proc-board += -@
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index e5c64c86d1d5..464b7565d085 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -121,8 +121,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 
@@ -138,8 +143,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x10000>,
+			      <0x00 0x484a0000 0x00 0x2000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x1000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 
@@ -502,6 +512,9 @@
 	main_gpio0: gpio@600000 {
 		compatible = "ti,am64-gpio", "ti,keystone-gpio";
 		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-ranges = <&main_pmx0  0  0 32>,
+			      <&main_pmx0 32 33 38>,
+			      <&main_pmx0 70 72 22>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
@@ -520,6 +533,10 @@
 		compatible = "ti,am64-gpio", "ti,keystone-gpio";
 		reg = <0x0 0x00601000 0x0 0x100>;
 		gpio-controller;
+		gpio-ranges = <&main_pmx0  0  94 41>,
+			      <&main_pmx0 41 136  6>,
+			      <&main_pmx0 47 143  3>,
+			      <&main_pmx0 50 149  2>;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
 		interrupts = <180>, <181>, <182>,
@@ -675,6 +692,15 @@
 		};
 	};
 
+	gpu: gpu@fd00000 {
+		compatible = "ti,am62-gpu", "img,img-axe";
+		reg = <0x00 0x0fd00000 0x00 0x20000>;
+		clocks = <&k3_clks 187 0>;
+		clock-names = "core";
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+	};
+
 	cpsw3g: ethernet@8000000 {
 		compatible = "ti,am642-cpsw-nuss";
 		#address-cells = <2>;
@@ -965,4 +991,66 @@
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
+
+	ti_csi2rx0: ticsi2rx@30102000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		dmas = <&main_bcdma 0 0x4700 0>;
+		dma-names = "rx0";
+		reg = <0x00 0x30102000 0x00 0x1000>;
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@30101000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30101000 0x00 0x1000>;
+			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@30110000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30110000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
index 013357d17d48..bf6d27e70bc4 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
@@ -214,6 +214,5 @@
 
 /* Verdin UART_2 */
 &wkup_uart0 {
-	/* FIXME: WKUP UART0 is used by DM firmware */
-	status = "reserved";
+	status = "okay";
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
index 6701cb8974bb..680071688dcb 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
@@ -235,6 +235,5 @@
 
 /* Verdin UART_2 */
 &wkup_uart0 {
-	/* FIXME: WKUP UART0 is used by DM firmware */
-	status = "reserved";
+	status = "okay";
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
new file mode 100644
index 000000000000..17b93534f658
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
+			    <&pinctrl_qspi1_cs_gpio>,
+			    <&pinctrl_qspi1_io0_gpio>,
+			    <&pinctrl_qspi1_io1_gpio>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin ETH */
+&cpsw3g {
+	status = "okay";
+};
+
+/* Verdin MDIO */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1*/
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 and PWM_2*/
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_3 DSI */
+&epwm1 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+		    <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	status = "okay";
+
+	/* Temperature sensor */
+	sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2 DSI */
+&main_i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4 CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	pinctrl-0 = <&pinctrl_spi1>,
+		    <&pinctrl_spi1_cs0>,
+		    <&pinctrl_qspi1_cs2_gpio>;
+	cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
index c685df7deaee..997dfafd27eb 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
@@ -207,6 +207,5 @@
 
 /* Verdin UART_2 */
 &wkup_uart0 {
-	/* FIXME: WKUP UART0 is used by DM firmware */
-	status = "reserved";
+	status = "okay";
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
index 5db52f237253..6a06724b6d16 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -233,6 +233,13 @@
 		>;
 	};
 
+	/* Verdin SPI_1 CS as GPIO */
+	pinctrl_qspi1_io4_gpio: main-gpio0-7-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x001c, PIN_INPUT, 7) /* (J23) OSPI0_D4.GPIO0_7 */ /* SODIMM 202 */
+		>;
+	};
+
 	/* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */
 	pinctrl_qspi1_cs_gpio: main-gpio0-11-default-pins {
 		pinctrl-single,pins = <
@@ -599,12 +606,18 @@
 	pinctrl_spi1: main-spi1-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0020, PIN_INPUT, 1) /* (J25) OSPI0_D5.SPI1_CLK */ /* SODIMM 196 */
-			AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
 			AM62X_IOPAD(0x0024, PIN_INPUT, 1) /* (H25) OSPI0_D6.SPI1_D0  */ /* SODIMM 200 */
 			AM62X_IOPAD(0x0028, PIN_INPUT, 1) /* (J22) OSPI0_D7.SPI1_D1  */ /* SODIMM 198 */
 		>;
 	};
 
+	/* Verdin SPI_1 CS */
+	pinctrl_spi1_cs0: main-spi1-cs0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
+		>;
+	};
+
 	/* ETH_25MHz_CLK */
 	pinctrl_eth_clock: main-system-clkout0-default-pins {
 		pinctrl-single,pins = <
@@ -1278,7 +1291,7 @@
 /* Verdin SPI_1 */
 &main_spi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1>;
+	pinctrl-0 = <&pinctrl_spi1>, <&pinctrl_spi1_cs0>;
 	ti,pindir-d0-out-d1-in;
 	status = "disabled";
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso
new file mode 100644
index 000000000000..5e80ca7033ba
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+};
+
+&main_gpio0 {
+	p11-hog {
+		/* P11 - CSI2_CAMERA_GPIO1 */
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "CSI2_CAMERA_GPIO1";
+	};
+};
+
+&wkup_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2rx0_in_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
new file mode 100644
index 000000000000..5e1cbbc27c8f
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Technexion TEVI-OV5640-*-RPI - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&main_gpio0 {
+	p11-hog {
+		/* P11 - CSI2_CAMERA_GPIO1 */
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "CSI2_CAMERA_GPIO1";
+	};
+};
+
+&wkup_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2rx0_in_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 9a6bd0a3c94f..eadbdd9ffe37 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -443,7 +443,7 @@
 		>;
 	};
 
-	console_pins_default: console-default-pins {
+	main_uart0_pins_default: main-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
@@ -877,7 +877,7 @@
 &main_uart0 {
 	bootph-all;
 	pinctrl-names = "default";
-	pinctrl-0 = <&console_pins_default>;
+	pinctrl-0 = <&main_uart0_pins_default>;
 	status = "okay";
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
index a438baf542c2..4bc0134c987d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
@@ -35,6 +35,18 @@
 		standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
 	};
 
+	hdmi0: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+
 	keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -93,6 +105,37 @@
 		>;
 	};
 
+	hdmi_int_pins_default: hdmi-int-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */
+		>;
+	};
+
+	main_dss0_pins_default: main-dss0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+			AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+			AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+			AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+			AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+			AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+			AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+			AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+			AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+			AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+			AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+			AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+			AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+			AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+			AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+			AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+			AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+			AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+			AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+			AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+		>;
+	};
+
 	main_i2c1_pins_default: main-i2c1-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
@@ -184,10 +227,30 @@
 	};
 };
 
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_dss0_pins_default>;
+	status = "okay";
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VP2: DPI/HDMI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
 &main_i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 	status = "okay";
 
 	gpio_exp: gpio-expander@21 {
@@ -201,12 +264,43 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN",
+		gpio-line-names = "", "GPIO1_CAN0_nEN",
 				  "GPIO2_LED2", "GPIO3_LVDS_GPIO",
 				  "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN",
 				  "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
 	};
 
+	sii9022: bridge-hdmi@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_int_pins_default>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
 	eeprom@51 {
 		compatible = "atmel,24c02";
 		pagesize = <16>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000000..9cae12106e0e
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-nonwifi.dtsi"
+#include "k3-am62-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 on Mallow Board";
+	compatible = "toradex,verdin-am62-nonwifi-mallow",
+		     "toradex,verdin-am62-nonwifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts
new file mode 100644
index 000000000000..81d834b22649
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-wifi.dtsi"
+#include "k3-am62-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 WB on Mallow Board";
+	compatible = "toradex,verdin-am62-wifi-mallow",
+		     "toradex,verdin-am62-wifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 4ae7fdc5221b..f0b8c9ab1459 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -101,8 +101,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 			ti,sci = <&dmsc>;
@@ -117,8 +122,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x10000>,
+			      <0x00 0x484a0000 0x00 0x2000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x1000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 			ti,sci = <&dmsc>;
@@ -144,6 +154,44 @@
 		};
 	};
 
+	dmss_csi: bus@4e000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x300000>;
+
+		ti,sci-dev-id = <198>;
+
+		inta_main_dmss_csi: interrupt-controller@4e0a0000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x4e0a0000 0x00 0x8000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <200>;
+			ti,interrupt-ranges = <0 237 8>;
+			ti,unmapped-event-sources = <&main_bcdma_csi>;
+			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		};
+
+		main_bcdma_csi: dma-controller@4e230000 {
+			compatible = "ti,am62a-dmss-bcdma-csirx";
+			reg = <0x00 0x4e230000 0x00 0x100>,
+			      <0x00 0x4e180000 0x00 0x8000>,
+			      <0x00 0x4e100000 0x00 0x10000>;
+			reg-names = "gcfg", "rchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss_csi>;
+			#dma-cells = <3>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <199>;
+			ti,sci-rm-range-rchan = <0x21>;
+			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		};
+	};
+
 	dmsc: system-controller@44043000 {
 		compatible = "ti,k2g-sci";
 		reg = <0x00 0x44043000 0x00 0xfe0>;
@@ -462,7 +510,7 @@
 			     <193>, <194>, <195>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <87>;
+		ti,ngpio = <92>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 77 0>;
@@ -480,7 +528,7 @@
 			     <183>, <184>, <185>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <88>;
+		ti,ngpio = <52>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 78 0>;
@@ -876,4 +924,65 @@
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
+
+	ti_csi2rx0: ticsi2rx@30102000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		dmas = <&main_bcdma_csi 0 0x5000 0>;
+		dma-names = "rx0";
+		reg = <0x00 0x30102000 0x00 0x1000>;
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@30101000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30101000 0x00 0x1000>;
+			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@30110000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30110000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
 };
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 8f64ac2c7568..7b7142586295 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -274,6 +274,12 @@
 			AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */
 		>;
 	};
+
+	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
+		>;
+	};
 };
 
 &mcu_pmx0 {
@@ -407,6 +413,12 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
 
 		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
 				   "BT_EN_SOC", "MMC1_SD_EN",
@@ -434,6 +446,33 @@
 		DRVDD-supply = <&vcc_3v3_sys>;
 		DVDD-supply = <&buck5>;
 	};
+
+	exp2: gpio@23 {
+		compatible = "ti,tca6424";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "", "",
+				  "", "",
+				  "", "",
+				  "", "",
+				  "WL_LT_EN", "CSI_RSTz",
+				  "", "",
+				  "", "",
+				  "", "",
+				  "SPI0_FET_SEL", "SPI0_FET_OE",
+				  "RGMII2_BRD_CONN_DET", "CSI_SEL2",
+				  "CSI_EN", "AUTO_100M_1000M_CONFIG",
+				  "CSI_VLDO_SEL", "SoC_WLAN_SDIO_RST";
+	};
+};
+
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
 };
 
 &sdhci1 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index 963758c7d377..4c51bae06b57 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -101,8 +101,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 
@@ -119,8 +124,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x10000>,
+			      <0x00 0x484a0000 0x00 0x2000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x1000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 			bootph-all;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index f377eadef0c1..1773c05f752c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -598,3 +598,12 @@
 	status = "reserved";
 	bootph-all;
 };
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&mcu_gpio_intr {
+	status = "reserved";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 19f57ead4ebd..33768c02d8eb 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -399,6 +399,13 @@
 	};
 };
 
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+};
+
 &sdhci0 {
 	bootph-all;
 	status = "okay";
@@ -517,3 +524,12 @@
 		};
 	};
 };
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&mcu_gpio_intr {
+	status = "reserved";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
new file mode 100644
index 000000000000..6f4cd73c2f43
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IMX219 (RPi v2) Camera Module
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_imx219_fixed: imx219-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&main_i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* CAM port */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ov5640: camera@10 {
+				compatible = "sony,imx219";
+				reg = <0x10>;
+
+				clocks = <&clk_imx219_fixed>;
+				clock-names = "xclk";
+
+				reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>;
+
+				port {
+					csi2_cam0: endpoint {
+						remote-endpoint = <&csi2rx0_in_sensor>;
+						link-frequencies = /bits/ 64 <456000000>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
new file mode 100644
index 000000000000..9323a4b38389
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+};
+
+&main_i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* CAM port */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ov5640: camera@3c {
+				compatible = "ovti,ov5640";
+				reg = <0x3c>;
+
+				clocks = <&clk_ov5640_fixed>;
+				clock-names = "xclk";
+				powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
+
+				port {
+					csi2_cam0: endpoint {
+						remote-endpoint = <&csi2rx0_in_sensor>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
new file mode 100644
index 000000000000..dcaa33a4c8d3
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Technexion TEVI-OV5640-*-RPI - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&main_i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* CAM port */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ov5640: camera@3c {
+				compatible = "ovti,ov5640";
+				reg = <0x3c>;
+
+				clocks = <&clk_ov5640_fixed>;
+				clock-names = "xclk";
+				powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
+
+				port {
+					csi2_cam0: endpoint {
+						remote-endpoint = <&csi2rx0_in_sensor>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 0be642bc1b86..e348114f42e0 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -63,7 +63,7 @@
 			#phy-cells = <1>;
 		};
 
-		epwm_tbclk: clock-controller@4140 {
+		epwm_tbclk: clock-controller@4130 {
 			compatible = "ti,am64-epwm-tbclk";
 			reg = <0x4130 0x4>;
 			#clock-cells = <1>;
@@ -138,8 +138,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 
@@ -155,8 +160,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x20000>,
+			      <0x00 0x484a0000 0x00 0x4000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 
@@ -623,6 +633,7 @@
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x7>;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@fa00000 {
@@ -641,6 +652,7 @@
 		ti,otap-del-sel-sdr104 = <0x6>;
 		ti,otap-del-sel-ddr50 = <0x9>;
 		ti,clkbuf-sel = <0x7>;
+		status = "disabled";
 	};
 
 	cpsw3g: ethernet@8000000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index f87f09d83c95..1678e74cb750 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -29,7 +29,7 @@
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -39,6 +39,54 @@
 			alignment = <0x1000>;
 			no-map;
 		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
 	};
 
 	leds {
@@ -166,6 +214,34 @@
 	status = "disabled";
 };
 
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
 &main_i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -191,6 +267,30 @@
 	};
 };
 
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
 &ospi0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -211,6 +311,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am642-evm.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 4dba18941015..8c5651d2cf5d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -468,11 +468,15 @@
 	bootph-all;
 };
 
-/* mcu_gpio0 is reserved for mcu firmware usage */
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
 &mcu_gpio0 {
 	status = "reserved";
 };
 
+&mcu_gpio_intr {
+	status = "reserved";
+};
+
 &main_spi0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -487,17 +491,19 @@
 	};
 };
 
+/* eMMC */
 &sdhci0 {
-	/* emmc */
+	status = "okay";
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
+/* SD/MMC */
 &sdhci1 {
-	/* SD/MMC */
 	bootph-all;
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	bus-width = <4>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index 9175e96842d8..53b64e55413f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -264,6 +264,7 @@
 };
 
 &sdhci1 {
+	status = "okay";
 	vmmc-supply = <&vcc_3v3_mmc>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am642-sk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index f29c8a9b59ba..1dddd6fc1a0d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -433,12 +433,17 @@
 	};
 };
 
-/* mcu_gpio0 is reserved for mcu firmware usage */
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
 &mcu_gpio0 {
 	status = "reserved";
 };
 
+&mcu_gpio_intr {
+	status = "reserved";
+};
+
 &sdhci0 {
+	status = "okay";
 	vmmc-supply = <&wlan_en>;
 	bus-width = <4>;
 	non-removable;
@@ -458,9 +463,10 @@
 	};
 };
 
+/* SD/MMC */
 &sdhci1 {
-	/* SD/MMC */
 	bootph-all;
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	bus-width = <4>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
index d95d80076a42..55102d35cecc 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -425,7 +425,6 @@
 	ti,driver-strength-ohm = <50>;
 	ti,fails-without-test-cd;
 	/* Enabled by overlay */
-	status = "disabled";
 };
 
 &tscadc0 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
index d82d4a98306a..6c785eff7d2f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
@@ -219,6 +219,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	non-removable;
 	disable-wp;
 	no-sdio;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
index 51f902fa35a7..1d1979859583 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) Siemens AG, 2021
+ * Copyright (c) Siemens AG, 2021-2023
  *
  * Authors:
  *   Jan Kiszka <jan.kiszka@siemens.com>
@@ -44,3 +44,11 @@
 &tx_pru2_1 {
 	status = "disabled";
 };
+
+&icssg0_eth {
+	status = "disabled";
+};
+
+&icssg0_mdio {
+	status = "disabled";
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
index e9419c4fe605..e9b57b87e42e 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
@@ -20,7 +20,9 @@
 
 &main_gpio1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&cp2102n_reset_pin_default>;
+	pinctrl-0 =
+		<&main_pcie_enable_pins_default>,
+		<&cp2102n_reset_pin_default>;
 	gpio-line-names =
 		"", "", "", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "", "", "",
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index ba1c14a54acf..2a9c8db68f4e 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -9,14 +9,26 @@
  * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2
  */
 
-#include "k3-am654.dtsi"
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/net/ti-dp83867.h>
 
 / {
 	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &main_i2c0;
+		i2c3 = &main_i2c1;
+		i2c4 = &main_i2c2;
+		i2c5 = &main_i2c3;
 		spi0 = &mcu_spi0;
 		mmc0 = &sdhci1;
 		mmc1 = &sdhci0;
+		ethernet1 = &icssg0_emac0;
+		ethernet2 = &icssg0_emac1;
 	};
 
 	chosen {
@@ -101,9 +113,498 @@
 		#clock-cells = <0>;
 		clock-frequency = <19200000>;
 	};
+
+	/* Dual Ethernet application node on PRU-ICSSG0 */
+	icssg0_eth: icssg0-eth {
+		compatible = "ti,am654-icssg-prueth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&icssg0_rgmii_pins_default>;
+		sram = <&msmc_ram>;
+
+		ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>,
+			<&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
+		firmware-name = "/*(DEBLOBBED)*/",
+				"/*(DEBLOBBED)*/",
+				"/*(DEBLOBBED)*/",
+				"/*(DEBLOBBED)*/",
+				"/*(DEBLOBBED)*/",
+				"/*(DEBLOBBED)*/";
+
+		ti,pruss-gp-mux-sel = <2>,      /* MII mode */
+				      <2>,
+				      <2>,
+				      <2>,	/* MII mode */
+				      <2>,
+				      <2>;
+
+		ti,mii-g-rt = <&icssg0_mii_g_rt>;
+		ti,mii-rt = <&icssg0_mii_rt>;
+		ti,iep = <&icssg0_iep0>,  <&icssg0_iep1>;
+
+		interrupt-parent = <&icssg0_intc>;
+		interrupts = <24 0 2>, <25 1 3>;
+		interrupt-names = "tx_ts0", "tx_ts1";
+
+		dmas = <&main_udmap 0xc100>, /* egress slice 0 */
+		       <&main_udmap 0xc101>, /* egress slice 0 */
+		       <&main_udmap 0xc102>, /* egress slice 0 */
+		       <&main_udmap 0xc103>, /* egress slice 0 */
+		       <&main_udmap 0xc104>, /* egress slice 1 */
+		       <&main_udmap 0xc105>, /* egress slice 1 */
+		       <&main_udmap 0xc106>, /* egress slice 1 */
+		       <&main_udmap 0xc107>, /* egress slice 1 */
+		       <&main_udmap 0x4100>, /* ingress slice 0 */
+		       <&main_udmap 0x4101>; /* ingress slice 1 */
+		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+			    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+			    "rx0", "rx1";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			icssg0_emac0: port@0 {
+				reg = <0>;
+				phy-handle = <&icssg0_eth0_phy>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4100>;
+				ti,half-duplex-capable;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			icssg0_emac1: port@1 {
+				reg = <1>;
+				phy-handle = <&icssg0_eth1_phy>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4104>;
+				ti,half-duplex-capable;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
 };
 
 &wkup_pmx0 {
+	pinctrl-names =
+		"default",
+		"d0-uart0-rxd",  "d0-gpio",  "d0-gpio-pullup",  "d0-gpio-pulldown",
+		"d1-uart0-txd",  "d1-gpio",  "d1-gpio-pullup",  "d1-gpio-pulldown",
+		"d2-uart0-ctsn", "d2-gpio",  "d2-gpio-pullup",  "d2-gpio-pulldown",
+		"d3-uart0-rtsn", "d3-gpio",  "d3-gpio-pullup",  "d3-gpio-pulldown",
+		"d10-spi0-cs0",  "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown",
+		"d11-spi0-d0",   "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown",
+		"d12-spi0-d1",   "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown",
+		"d13-spi0-clk",  "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown",
+		"a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown",
+		"a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown",
+		"a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown",
+		"a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown",
+		"a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown",
+		"a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown";
+
+	pinctrl-0 = <&d0_uart0_rxd>;
+	pinctrl-1 = <&d0_uart0_rxd>;
+	pinctrl-2 = <&d0_gpio>;
+	pinctrl-3 = <&d0_gpio_pullup>;
+	pinctrl-4 = <&d0_gpio_pulldown>;
+	pinctrl-5 = <&d1_uart0_txd>;
+	pinctrl-6 = <&d1_gpio>;
+	pinctrl-7 = <&d1_gpio_pullup>;
+	pinctrl-8 = <&d1_gpio_pulldown>;
+	pinctrl-9 = <&d2_uart0_ctsn>;
+	pinctrl-10 = <&d2_gpio>;
+	pinctrl-11 = <&d2_gpio_pullup>;
+	pinctrl-12 = <&d2_gpio_pulldown>;
+	pinctrl-13 = <&d3_uart0_rtsn>;
+	pinctrl-14 = <&d3_gpio>;
+	pinctrl-15 = <&d3_gpio_pullup>;
+	pinctrl-16 = <&d3_gpio_pulldown>;
+	pinctrl-17 = <&d10_spi0_cs0>;
+	pinctrl-18 = <&d10_gpio>;
+	pinctrl-19 = <&d10_gpio_pullup>;
+	pinctrl-20 = <&d10_gpio_pulldown>;
+	pinctrl-21 = <&d11_spi0_d0>;
+	pinctrl-22 = <&d11_gpio>;
+	pinctrl-23 = <&d11_gpio_pullup>;
+	pinctrl-24 = <&d11_gpio_pulldown>;
+	pinctrl-25 = <&d12_spi0_d1>;
+	pinctrl-26 = <&d12_gpio>;
+	pinctrl-27 = <&d12_gpio_pullup>;
+	pinctrl-28 = <&d12_gpio_pulldown>;
+	pinctrl-29 = <&d13_spi0_clk>;
+	pinctrl-30 = <&d13_gpio>;
+	pinctrl-31 = <&d13_gpio_pullup>;
+	pinctrl-32 = <&d13_gpio_pulldown>;
+	pinctrl-33 = <&a0_gpio>;
+	pinctrl-34 = <&a0_gpio_pullup>;
+	pinctrl-35 = <&a0_gpio_pulldown>;
+	pinctrl-36 = <&a1_gpio>;
+	pinctrl-37 = <&a1_gpio_pullup>;
+	pinctrl-38 = <&a1_gpio_pulldown>;
+	pinctrl-39 = <&a2_gpio>;
+	pinctrl-40 = <&a2_gpio_pullup>;
+	pinctrl-41 = <&a2_gpio_pulldown>;
+	pinctrl-42 = <&a3_gpio>;
+	pinctrl-43 = <&a3_gpio_pullup>;
+	pinctrl-44 = <&a3_gpio_pulldown>;
+	pinctrl-45 = <&a4_gpio>;
+	pinctrl-46 = <&a4_gpio_pullup>;
+	pinctrl-47 = <&a4_gpio_pulldown>;
+	pinctrl-48 = <&a5_gpio>;
+	pinctrl-49 = <&a5_gpio_pullup>;
+	pinctrl-50 = <&a5_gpio_pulldown>;
+
+	d0_uart0_rxd: d0-uart0-rxd-pins {
+		pinctrl-single,pins = <
+			/* (P4) MCU_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)
+		>;
+	};
+
+	d0_gpio: d0-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7)
+		>;
+	};
+
+	d0_gpio_pullup: d0-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d0_gpio_pulldown: d0-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d1_uart0_txd: d1-uart0-txd-pins {
+		pinctrl-single,pins = <
+			/* (P5) MCU_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
+		>;
+	};
+
+	d1_gpio: d1-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+		>;
+	};
+
+	d1_gpio_pullup: d1-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+		>;
+	};
+
+	d1_gpio_pulldown: d1-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d2_uart0_ctsn: d2-uart0-ctsn-pins {
+		pinctrl-single,pins = <
+			/* (P1) MCU_UART0_CTSn */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4)
+		>;
+	};
+
+	d2_gpio: d2-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+		>;
+	};
+
+	d2_gpio_pullup: d2-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+		>;
+	};
+
+	d2_gpio_pulldown: d2-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d3_uart0_rtsn: d3-uart0-rtsn-pins {
+		pinctrl-single,pins = <
+			/* (N3) MCU_UART0_RTSn */
+			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4)
+		>;
+	};
+
+	d3_gpio: d3-gpio-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	d3_gpio_pullup: d3-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	d3_gpio_pulldown: d3-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d10_spi0_cs0: d10-spi0-cs0-pins {
+		pinctrl-single,pins = <
+			/* (Y4) MCU_SPI0_CS0 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	d10_gpio: d10-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+		>;
+	};
+
+	d10_gpio_pullup: d10-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+		>;
+	};
+
+	d10_gpio_pulldown: d10-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d11_spi0_d0: d11-spi0-d0-pins {
+		pinctrl-single,pins = <
+			/* (Y3) MCU_SPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0)
+		>;
+	};
+
+	d11_gpio: d11-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+		>;
+	};
+
+	d11_gpio_pullup: d11-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+		>;
+	};
+
+	d11_gpio_pulldown: d11-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d12_spi0_d1: d12-spi0-d1-pins {
+		pinctrl-single,pins = <
+			/* (Y2) MCU_SPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0)
+		>;
+	};
+
+	d12_gpio: d12-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d12_gpio_pullup: d12-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d12_gpio_pulldown: d12-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d13_spi0_clk: d13-spi0-clk-pins {
+		pinctrl-single,pins = <
+			/* (Y1) MCU_SPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0)
+		>;
+	};
+
+	d13_gpio: d13-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+		>;
+	};
+
+	d13_gpio_pullup: d13-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+		>;
+	};
+
+	d13_gpio_pulldown: d13-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a0_gpio: a0-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	a0_gpio_pullup: a0-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	a0_gpio_pulldown: a0-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a1_gpio: a1-gpio-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+		>;
+	};
+
+	a1_gpio_pullup: a1-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+		>;
+	};
+
+	a1_gpio_pulldown: a1-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a2_gpio: a2-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+		>;
+	};
+
+	a2_gpio_pullup: a2-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+		>;
+	};
+
+	a2_gpio_pulldown: a2-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a3_gpio: a3-gpio-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+		>;
+	};
+
+	a3_gpio_pullup: a3-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+		>;
+	};
+
+	a3_gpio_pulldown: a3-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a4_gpio: a4-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+		>;
+	};
+
+	a4_gpio_pullup: a4-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+		>;
+	};
+
+	a4_gpio_pulldown: a4-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a5_gpio: a5-gpio-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7)
+		>;
+	};
+
+	a5_gpio_pullup: a5-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	a5_gpio_pulldown: a5-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		pinctrl-single,pins = <
 			/* (AC7) WKUP_I2C0_SCL */
@@ -136,23 +637,6 @@
 		>;
 	};
 
-	arduino_uart_pins_default: arduino-uart-default-pins {
-		pinctrl-single,pins = <
-			/* (P4) MCU_UART0_RXD */
-			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT,  4)
-			/* (P5) MCU_UART0_TXD */
-			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
-		>;
-	};
-
-	arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins {
-		pinctrl-single,pins = <
-			/* (P1) WKUP_GPIO0_31 */
-			AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7)
-			/* (N3) WKUP_GPIO0_33 */
-			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7)
-		>;
-	};
 
 	arduino_io_oe_pins_default: arduino-io-oe-default-pins {
 		pinctrl-single,pins = <
@@ -232,6 +716,220 @@
 };
 
 &main_pmx0 {
+	pinctrl-names =
+		"default",
+		"d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown",
+		"d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown",
+		"d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown",
+		"d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown",
+		"d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown",
+		"d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown";
+
+	pinctrl-0 = <&d4_ehrpwm0_a>;
+	pinctrl-1 = <&d4_ehrpwm0_a>;
+	pinctrl-2 = <&d4_gpio>;
+	pinctrl-3 = <&d4_gpio_pullup>;
+	pinctrl-4 = <&d4_gpio_pulldown>;
+
+	pinctrl-5 = <&d5_ehrpwm1_a>;
+	pinctrl-6 = <&d5_gpio>;
+	pinctrl-7 = <&d5_gpio_pullup>;
+	pinctrl-8 = <&d5_gpio_pulldown>;
+
+	pinctrl-9 = <&d6_ehrpwm2_a>;
+	pinctrl-10 = <&d6_gpio>;
+	pinctrl-11 = <&d6_gpio_pullup>;
+	pinctrl-12 = <&d6_gpio_pulldown>;
+
+	pinctrl-13 = <&d7_ehrpwm3_a>;
+	pinctrl-14 = <&d7_gpio>;
+	pinctrl-15 = <&d7_gpio_pullup>;
+	pinctrl-16 = <&d7_gpio_pulldown>;
+
+	pinctrl-17 = <&d8_ehrpwm4_a>;
+	pinctrl-18 = <&d8_gpio>;
+	pinctrl-19 = <&d8_gpio_pullup>;
+	pinctrl-20 = <&d8_gpio_pulldown>;
+
+	pinctrl-21 = <&d9_ehrpwm5_a>;
+	pinctrl-22 = <&d9_gpio>;
+	pinctrl-23 = <&d9_gpio_pullup>;
+	pinctrl-24 = <&d9_gpio_pulldown>;
+
+	d4_ehrpwm0_a: d4-ehrpwm0-a-pins {
+		pinctrl-single,pins = <
+			/* (AG18) EHRPWM0_A */
+			AM65X_IOPAD(0x0084, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d4_gpio: d4-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	d4_gpio_pullup: d4-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d4_gpio_pulldown: d4-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d5_ehrpwm1_a: d5-ehrpwm1-a-pins {
+		pinctrl-single,pins = <
+			/* (AF17) EHRPWM1_A */
+			AM65X_IOPAD(0x008C, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d5_gpio: d5-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT, 7)
+		>;
+	};
+
+	d5_gpio_pullup: d5-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d5_gpio_pulldown: d5-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d6_ehrpwm2_a: d6-ehrpwm2-a-pins {
+		pinctrl-single,pins = <
+			/* (AH16) EHRPWM2_A */
+			AM65X_IOPAD(0x0098, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d6_gpio: d6-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d6_gpio_pullup: d6-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d6_gpio_pulldown: d6-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d7_ehrpwm3_a: d7-ehrpwm3-a-pins {
+		pinctrl-single,pins = <
+			/* (AH15) EHRPWM3_A */
+			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d7_gpio: d7-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT, 7)
+		>;
+	};
+
+	d7_gpio_pullup: d7-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d7_gpio_pulldown: d7-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d8_ehrpwm4_a: d8-ehrpwm4-a-pins {
+		pinctrl-single,pins = <
+			/* (AG15) EHRPWM4_A */
+			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d8_gpio: d8-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT, 7)
+		>;
+	};
+
+	d8_gpio_pullup: d8-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d8_gpio_pulldown: d8-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d9_ehrpwm5_a: d9-ehrpwm5-a-pins {
+		pinctrl-single,pins = <
+			/* (AD15) EHRPWM5_A */
+			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d9_gpio: d9-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT, 7)
+		>;
+	};
+
+	d9_gpio_pullup: d9-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d9_gpio_pulldown: d9-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	main_pcie_enable_pins_default: main-pcie-enable-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
+		>;
+	};
+
 	main_uart1_pins_default: main-uart1-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x0174, PIN_INPUT,  6)  /* (AE23) UART1_RXD */
@@ -273,17 +971,6 @@
 		>;
 	};
 
-	arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x0084, PIN_OUTPUT, 7)  /* (AG18) GPIO0_33 */
-			AM65X_IOPAD(0x008C, PIN_OUTPUT, 7)  /* (AF17) GPIO0_35 */
-			AM65X_IOPAD(0x0098, PIN_OUTPUT, 7)  /* (AH16) GPIO0_38 */
-			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7)  /* (AH15) GPIO0_43 */
-			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7)  /* (AG15) GPIO0_48 */
-			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7)  /* (AD15) GPIO0_51 */
-		>;
-	};
-
 	dss_vout1_pins_default: dss-vout1-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x0000, PIN_OUTPUT, 1)  /* VOUT1_DATA0 */
@@ -329,6 +1016,43 @@
 			AM65X_IOPAD(0x0070, PIN_INPUT,  5)  /* (R25) I2C2_SDA */
 		>;
 	};
+
+	icssg0_mdio_pins_default: icssg0-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */
+			AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */
+		>;
+	};
+
+	icssg0_rgmii_pins_default: icssg0-rgmii-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */
+			AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */
+			AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */
+			AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */
+			AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */
+			AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */
+			AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */
+			AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */
+			AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */
+			AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */
+			AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */
+			AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */
+
+			AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */
+			AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */
+			AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */
+			AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */
+			AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */
+			AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */
+			AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */
+			AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */
+			AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */
+			AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */
+			AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */
+			AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */
+		>;
+	};
 };
 
 &main_pmx1 {
@@ -345,12 +1069,6 @@
 			AM65X_IOPAD(0x000c, PIN_INPUT,  0)  /* (E21) I2C1_SDA */
 		>;
 	};
-
-	ecap0_pins_default: ecap0-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x0010, PIN_INPUT,  0)  /* (D21) ECAP0_IN_APWM_OUT */
-		>;
-	};
 };
 
 &wkup_uart0 {
@@ -366,13 +1084,9 @@
 
 &mcu_uart0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&arduino_uart_pins_default>;
 };
 
 &main_gpio0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>;
 	gpio-line-names =
 		"main_gpio0-base", "", "", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "", "", "",
@@ -382,10 +1096,14 @@
 		"", "IO9";
 };
 
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_pcie_enable_pins_default>;
+};
+
 &wkup_gpio0 {
 	pinctrl-names = "default";
 	pinctrl-0 =
-		<&arduino_io_d2_to_d3_pins_default>,
 		<&arduino_i2c_aio_switch_pins_default>,
 		<&arduino_io_oe_pins_default>,
 		<&push_button_pins_default>,
@@ -547,13 +1265,8 @@
 	status = "disabled";
 };
 
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins_default>;
-};
-
 &sdhci1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	ti,driver-strength-ohm = <50>;
@@ -574,9 +1287,6 @@
 
 &mcu_spi0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_spi0_pins_default>;
-
 	#address-cells = <1>;
 	#size-cells = <0>;
 	ti,pindir-d0-out-d1-in;
@@ -716,3 +1426,21 @@
 			<&mcu_r5fss0_core1_memory_region>;
 	mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
 };
+
+&icssg0_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg0_mdio_pins_default>;
+
+	icssg0_eth0_phy: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+
+	icssg0_eth1_phy: ethernet-phy@1 {
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 5ebb87f467de..fcea54465636 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -449,6 +449,7 @@
 		ti,otap-del-sel-hs400 = <0x0>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@4fa0000 {
@@ -471,6 +472,7 @@
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	scm_conf: scm-conf@100000 {
@@ -498,8 +500,8 @@
 		};
 
 		dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
-			compatible = "syscon";
-			reg = <0x000041e0 0x14>;
+			compatible = "ti,am654-dss-oldi-io-ctrl", "syscon";
+			reg = <0x41e0 0x14>;
 		};
 
 		ehrpwm_tbclk: clock-controller@4140 {
@@ -790,8 +792,12 @@
 			compatible = "ti,am654-navss-main-udmap";
 			reg = <0x0 0x31150000 0x0 0x100>,
 			      <0x0 0x34000000 0x0 0x100000>,
-			      <0x0 0x35000000 0x0 0x100000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x35000000 0x0 0x100000>,
+			      <0x0 0x30b00000 0x0 0x10000>,
+			      <0x0 0x30c00000 0x0 0x10000>,
+			      <0x0 0x30d00000 0x0 0x8000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_udmass>;
 			#dma-cells = <1>;
 
@@ -1034,7 +1040,7 @@
 		assigned-clocks = <&k3_clks 67 2>;
 		assigned-clock-parents = <&k3_clks 67 5>;
 
-		interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 
 		dma-coherent;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index edd5cfbec40e..ecd7356f3315 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -214,8 +214,12 @@
 			compatible = "ti,am654-navss-mcu-udmap";
 			reg = <0x0 0x285c0000 0x0 0x100>,
 			      <0x0 0x2a800000 0x0 0x40000>,
-			      <0x0 0x2aa00000 0x0 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x2aa00000 0x0 0x40000>,
+			      <0x0 0x284a0000 0x0 0x4000>,
+			      <0x0 0x284c0000 0x0 0x4000>,
+			      <0x0 0x28400000 0x0 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_udmass>;
 			#dma-cells = <1>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index fd2b998ebddc..f037b36243ce 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -34,9 +34,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x43000014 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	wkup_pmx0: pinctrl@4301c000 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am652.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am652.dtsi
new file mode 100644
index 000000000000..0f22e00faa90
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am652.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM65 SoC family in Dual core configuration
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am65.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-am654-industrial-thermal.dtsi"
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
index 5ab434c02ab6..1d6cddb11991 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -9,6 +9,7 @@
  * Common bits of the IOT2050 Basic variant, PG1 and PG2
  */
 
+#include "k3-am652.dtsi"
 #include "k3-am65-iot2050-common.dtsi"
 
 / {
@@ -17,21 +18,6 @@
 		/* 1G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
 	};
-
-	cpus {
-		cpu-map {
-			/delete-node/ cluster1;
-		};
-		/delete-node/ cpu@100;
-		/delete-node/ cpu@101;
-	};
-
-	/delete-node/ l2-cache1;
-};
-
-/* eMMC */
-&sdhci0 {
-	status = "disabled";
 };
 
 &main_pmx0 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 1637ec5ab5ed..822c288d2797 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -449,6 +449,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	bus-width = <8>;
@@ -463,6 +464,7 @@
  * disable sdhci1
  */
 &sdhci1 {
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1_sd>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
index be55494b1f3f..3864ec54e371 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 
+#include "k3-am654.dtsi"
 #include "k3-am65-iot2050-common.dtsi"
 
 / {
@@ -43,6 +44,7 @@
 
 /* eMMC */
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	bus-width = <8>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
index 774eb14ac907..bd6f2e696e94 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -27,12 +27,6 @@
 };
 
 &main_pmx0 {
-	main_m2_enable_pins_default: main-m2-enable-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
-		>;
-	};
-
 	main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7)  /* (AG13) GPIO1_15 */
@@ -66,15 +60,13 @@
 
 &main_gpio0 {
 	pinctrl-names = "default";
-	pinctrl-0 =
-		<&main_m2_pcie_mux_control>,
-		<&arduino_io_d4_to_d9_pins_default>;
+	pinctrl-0 = <&main_m2_pcie_mux_control>;
 };
 
 &main_gpio1 {
 	pinctrl-names = "default";
 	pinctrl-0 =
-		<&main_m2_enable_pins_default>,
+		<&main_pcie_enable_pins_default>,
 		<&main_pmx0_m2_config_pins_default>,
 		<&main_pmx1_m2_config_pins_default>,
 		<&cp2102n_reset_pin_default>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 1e1a82f9d2b8..d0cfdeac21fb 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -31,6 +31,7 @@
 		can1 = &mcu_mcan1;
 		can2 = &main_mcan6;
 		can3 = &main_mcan7;
+		ethernet0 = &cpsw_port1;
 	};
 
 	vusb_main: regulator-vusb-main5v0 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am69-sk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 9868c7049bfb..8da591579868 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -433,6 +433,13 @@
 
 &wkup_pmx2 {
 	bootph-all;
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			/* (AA37) MCU_ADC1_AIN4.WKUP_GPIO0_83 */
+			J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 7)
+		>;
+	};
+
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
@@ -631,6 +638,93 @@
 		compatible = "atmel,24c512";
 		reg = <0x51>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck12-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vds_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &wkup_gpio0 {
@@ -671,7 +765,7 @@
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		gpio-line-names	= "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN",
+		gpio-line-names = "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN",
 				"IO_EXP_MCU_RGMII_RST#", "IO_EXP_PCIe0_4L_PERST#",
 				"IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_PCIe3_M.2_RTSz",
 				"PM_INA_BUS_EN", "ENET1_EXP_PWRDN", "EXP1_ENET_RSTz",
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 264913f83287..da67bf8fe703 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -281,8 +281,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x00 0x31150000 0x00 0x100>,
 			      <0x00 0x34000000 0x00 0x100000>,
-			      <0x00 0x35000000 0x00 0x100000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x35000000 0x00 0x100000>,
+			      <0x00 0x30b00000 0x00 0x4000>,
+			      <0x00 0x30c00000 0x00 0x4000>,
+			      <0x00 0x30d00000 0x00 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
@@ -647,6 +651,7 @@
 		ti,otap-del-sel-hs400 = <0x5>;
 		ti,itap-del-sel-legacy = <0x10>;
 		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
 		ti,strobe-sel = <0x77>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 3fc588b848c6..60b26374ae0c 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -178,9 +178,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x00 0x43000014 0x00 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
@@ -346,8 +353,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x00 0x285c0000 0x00 0x100>,
 			      <0x00 0x2a800000 0x00 0x40000>,
-			      <0x00 0x2aa00000 0x00 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x2aa00000 0x00 0x40000>,
+			      <0x00 0x284a0000 0x00 0x4000>,
+			      <0x00 0x284c0000 0x00 0x4000>,
+			      <0x00 0x28400000 0x00 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index 5a300d4c8ba0..ea47f10d393a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -127,6 +127,14 @@
 	};
 };
 
+&wkup_pmx3 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x01c, PIN_INPUT, 7) /* (E18) WKUP_GPIO0_84 */
+		>;
+	};
+};
+
 &main_pmx0 {
 	main_i2c0_pins_default: main-i2c0-default-pins {
 		pinctrl-single,pins = <
@@ -264,6 +272,151 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659414: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck1-supply = <&vsys_3v3>;
+		buck2-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka1: buck1 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka2: buck2 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_phyio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd1_lpddr4_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdd_wk_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	lp876441: pmic@4c {
+		compatible = "ti,lp8764-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1-supply = <&vsys_3v3>;
+		buck2-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+
+		regulators: regulators {
+			buckb1: buck1 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				bootph-pre-ram;
+			};
+
+			buckb2: buck2 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb3: buck3 {
+				regulator-name = "vdd_core_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb4: buck4 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &ospi0 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso
new file mode 100644
index 000000000000..0c82a13b65a4
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for enabling PCIE0 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie0_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie0_ep: pcie-ep@2900000 {
+		compatible = "ti,j721e-pcie-ep";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
+		max-link-speed = <3>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 239 1>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie_link>;
+		phy-names = "pcie-phy";
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 746b9f8b1c64..2569b4c08ffb 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -382,8 +382,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x0 0x31150000 0x0 0x100>,
 			      <0x0 0x34000000 0x0 0x100000>,
-			      <0x0 0x35000000 0x0 0x100000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x35000000 0x0 0x100000>,
+			      <0x0 0x30b00000 0x0 0x20000>,
+			      <0x0 0x30c00000 0x0 0x10000>,
+			      <0x0 0x30d00000 0x0 0x8000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index f7ab7719fc07..a74912d9e4da 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -48,9 +48,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x0 0x43000014 0x0 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	wkup_pmx0: pinctrl@4301c000 {
@@ -468,8 +475,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x0 0x285c0000 0x0 0x100>,
 			      <0x0 0x2a800000 0x0 0x40000>,
-			      <0x0 0x2aa00000 0x0 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x2aa00000 0x0 0x40000>,
+			      <0x0 0x284a0000 0x0 0x4000>,
+			      <0x0 0x284c0000 0x0 0x4000>,
+			      <0x0 0x28400000 0x0 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 42fe8eee9ec8..188dfe291a32 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -459,6 +459,12 @@
 };
 
 &wkup_pmx0 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0cc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
+		>;
+	};
+
 	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
@@ -560,6 +566,151 @@
 		compatible = "atmel,24c512";
 		reg = <0x51>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck123-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka123: buck123 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-pre-ram;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_phyio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd1_lpddr4_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	tps659411: pmic@4c {
+		compatible = "ti,tps6594-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1234-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			buckb1234: buck1234 {
+				regulator-name = "vdd_core_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb5: buck5 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob1: ldo1 {
+				regulator-name = "vdd_sd_dv";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob2: ldo2 {
+				regulator-name = "vdd_usb_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob3: ldo3 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &mcu_uart0 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 7f0686c2ce37..a75611eec791 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -152,6 +152,12 @@
 		>;
 	};
 
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0d4, PIN_INPUT, 7) /* (G26) WKUP_GPIO0_9 */
+		>;
+	};
+
 	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
@@ -199,6 +205,160 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck12-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-pre-ram;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_phyio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd1_lpddr4_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	tps659411: pmic@4c {
+		compatible = "ti,tps6594-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1234-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			buckb1234: buck1234 {
+				regulator-name = "vdd_core_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb5: buck5 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob1: ldo1 {
+				regulator-name = "vdd_sd_dv";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob2: ldo2 {
+				regulator-name = "vdd_usb_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob3: ldo3 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &ospi0 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
new file mode 100644
index 000000000000..43568eb67d93
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie1_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		max-link-speed = <3>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 41>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie_link>;
+		phy-names = "pcie-phy";
+	};
+};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index b03731b53a26..ea7f2b2ab165 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -766,6 +766,7 @@
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
@@ -1086,8 +1087,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x0 0x31150000 0x0 0x100>,
 			      <0x0 0x34000000 0x0 0x80000>,
-			      <0x0 0x35000000 0x0 0x200000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x35000000 0x0 0x200000>,
+			      <0x0 0x30b00000 0x0 0x20000>,
+			      <0x0 0x30c00000 0x0 0x8000>,
+			      <0x0 0x30d00000 0x0 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 7254f3bd3634..80aa33c58a45 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -34,9 +34,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x00 0x43000014 0x00 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
@@ -471,8 +478,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x0 0x285c0000 0x0 0x100>,
 			      <0x0 0x2a800000 0x0 0x40000>,
-			      <0x0 0x2aa00000 0x0 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x2aa00000 0x0 0x40000>,
+			      <0x0 0x284a0000 0x0 0x4000>,
+			      <0x0 0x284c0000 0x0 0x4000>,
+			      <0x0 0x28400000 0x0 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index dcad372620b1..da3237b23b63 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -172,6 +172,15 @@
 	};
 };
 
+&wkup_pmx1 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			/* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 7)
+		>;
+	};
+};
+
 &wkup_pmx2 {
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		pinctrl-single,pins = <
@@ -208,6 +217,190 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659411: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck1234-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka1234: buck1234 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-pre-ram;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd_mcuwk_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcu_gpioret_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	tps659414: pmic@4c {
+		compatible = "ti,tps6594-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1-supply = <&vsys_3v3>;
+		buck2-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			buckb1: buck1 {
+				regulator-name = "vdd_io_1v8_reg";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buckb2: buck2 {
+				regulator-name = "vdd_fpd_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb3: buck3 {
+				regulator-name = "vdd_phy_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb4: buck4 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb5: buck5 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob1: ldo1 {
+				regulator-name = "vdd_wk_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob2: ldo2 {
+				regulator-name = "vdd_gpioret_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob3: ldo3 {
+				regulator-name = "vda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	lp876411: pmic@58 {
+		compatible = "ti,lp8764-q1";
+		reg = <0x58>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1234-supply = <&vsys_3v3>;
+
+		regulators {
+			buckc1234: buck1234 {
+				regulator-name = "vdd_core_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &main_i2c0 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index f1f4c8634ab6..f34b92acc56d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -273,6 +273,10 @@
 	};
 };
 
+&wkup_gpio0 {
+	status = "okay";
+};
+
 &main_pmx0 {
 	bootph-all;
 	main_uart8_pins_default: main-uart8-default-pins {
@@ -407,6 +411,17 @@
 	};
 };
 
+&wkup_pmx1 {
+	status = "okay";
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			/* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7)
+		>;
+	};
+};
+
 &wkup_pmx0 {
 	bootph-all;
 	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
@@ -471,6 +486,93 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck12-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vds_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &mcu_uart0 {
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index d89bcddcfe3d..f2b720ed1e4f 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -712,6 +712,7 @@
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
@@ -1188,8 +1189,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x00 0x31150000 0x00 0x100>,
 			      <0x00 0x34000000 0x00 0x80000>,
-			      <0x00 0x35000000 0x00 0x200000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x35000000 0x00 0x200000>,
+			      <0x00 0x30b00000 0x00 0x20000>,
+			      <0x00 0x30c00000 0x00 0x8000>,
+			      <0x00 0x30d00000 0x00 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index adb5ea6b9732..3902a921d7e5 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -38,10 +38,18 @@
 		};
 	};
 
-	chipid@43000014 {
+	wkup_conf: bus@43000000 {
 		bootph-all;
-		compatible = "ti,am654-chipid";
-		reg = <0x00 0x43000014 0x00 0x4>;
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			bootph-all;
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
@@ -478,8 +486,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x00 0x285c0000 0x00 0x100>,
 			      <0x00 0x2a800000 0x00 0x40000>,
-			      <0x00 0x2aa00000 0x00 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x2aa00000 0x00 0x40000>,
+			      <0x00 0x284a0000 0x00 0x4000>,
+			      <0x00 0x284c0000 0x00 0x4000>,
+			      <0x00 0x28400000 0x00 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/Makefile linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/Makefile
index 5e40c0b4fa0a..1068b0fa8e98 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/Makefile
@@ -22,11 +22,10 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA.dtb
 
 zynqmp-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revA.dtb
 zynqmp-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revB.dtb
 zynqmp-smk-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revA.dtb
 zynqmp-smk-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
-
-zynqmp-sm-k26-revA-sck-kr-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
-zynqmp-sm-k26-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
-zynqmp-smk-k26-revA-sck-kr-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
-zynqmp-smk-k26-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revB.dtb
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index ae1b9b2bdbee..92f4190d564d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -21,57 +21,57 @@
 /dts-v1/;
 /plugin/;
 
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	/* u14 - 0x40 - ina260 */
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
-	si5332_0: si5332_0 { /* u17 */
+&{/} {
+	si5332_0: si5332-0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
 
-	si5332_1: si5332_1 { /* u17 */
+	si5332_1: si5332-1 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	si5332_2: si5332_2 { /* u17 */
+	si5332_2: si5332-2 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
 
-	si5332_3: si5332_3 { /* u17 */
+	si5332_3: si5332-3 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
 
-	si5332_4: si5332_4 { /* u17 */
+	si5332_4: si5332-4 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5332_5: si5332_5 { /* u17 */
+	si5332_5: si5332-5 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 and SATA */
 &psgtr {
 	status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index b59e48be6465..f88b71f5b07a 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -16,58 +16,58 @@
 /dts-v1/;
 /plugin/;
 
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	/* u14 - 0x40 - ina260 */
-	/* u43 - 0x2d - usb5744 */
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
-	si5332_0: si5332_0 { /* u17 */
+&{/} {
+	si5332_0: si5332-0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
 
-	si5332_1: si5332_1 { /* u17 */
+	si5332_1: si5332-1 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	si5332_2: si5332_2 { /* u17 */
+	si5332_2: si5332-2 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
 
-	si5332_3: si5332_3 { /* u17 */
+	si5332_3: si5332-3 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
 
-	si5332_4: si5332_4 { /* u17 */
+	si5332_4: si5332-4 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5332_5: si5332_5 { /* u17 */
+	si5332_5: si5332-5 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u43 - 0x2d - usb5744 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 */
 &psgtr {
 	status = "okay";
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index c4774a42d5fc..51622896b1b1 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -131,9 +131,7 @@
 &qspi { /* MIO 0-5 - U143 */
 	status = "okay";
 	spi_flash: flash@0 { /* MT25QU512A */
-		compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */
-		#address-cells = <1>;
-		#size-cells = <1>;
+		compatible = "jedec,spi-nor"; /* 64MB */
 		reg = <0>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
@@ -222,9 +220,9 @@
 				label = "Secure OS Storage";
 				reg = <0x2280000 0x20000>; /* 128KB */
 			};
-			partition@22A0000 {
+			partition@22a0000 {
 				label = "User";
-				reg = <0x22A0000 0x1d60000>; /* 29.375 MB */
+				reg = <0x22a0000 0x1d60000>; /* 29.375 MB */
 			};
 		};
 	};
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
index e821d55d8d5a..73491626e01e 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -98,8 +98,12 @@
 	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem3_default>;
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index b59e11316b4b..f767708fb50d 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -91,12 +91,16 @@
 	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem2_default>;
-	phy0: ethernet-phy@5 {
-		reg = <5>;
-		ti,rx-internal-delay = <0x8>;
-		ti,tx-internal-delay = <0xa>;
-		ti,fifo-depth = <0x1>;
-		ti,dp83867-rxctrl-strap-quirk;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@5 {
+			reg = <5>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+		};
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
index 38b0a312171b..f553b317e6b2 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
@@ -88,8 +88,12 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: ethernet-phy@0 { /* VSC8211 */
-		reg = <0>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 { /* VSC8211 */
+			reg = <0>;
+		};
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
index 6636e76545a5..6ec1d9813973 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
@@ -116,17 +116,21 @@
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy0>;
-	ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
-		reg = <0>;
-	};
-	ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
-		reg = <7>;
-	};
-	ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
-		reg = <3>;
-	};
-	ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
-		reg = <8>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
+			reg = <0>;
+		};
+		ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
+			reg = <7>;
+		};
+		ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
+			reg = <3>;
+		};
+		ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
+			reg = <8>;
+		};
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
index 0d2ea9c09a0a..b1857e17ab7e 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
@@ -77,8 +77,12 @@
 	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem1_default>;
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index d0091d3cb764..52f998c22538 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -123,13 +123,13 @@
 		io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
 	};
 
-	si5335_0: si5335_0 { /* clk0_usb - u23 */
+	si5335_0: si5335-0 { /* clk0_usb - u23 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5335_1: si5335_1 { /* clk1_dp - u23 */
+	si5335_1: si5335-1 { /* clk1_dp - u23 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index b61fc99cd911..eaba466804bc 100644
--- linux-libre-6.7-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ linux-libre-6.8-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -129,7 +129,7 @@
 		};
 	};
 
-	zynqmp_ipi: zynqmp_ipi {
+	zynqmp_ipi: zynqmp-ipi {
 		bootph-all;
 		compatible = "xlnx,zynqmp-ipi-mailbox";
 		interrupt-parent = <&gic>;
@@ -141,6 +141,7 @@
 
 		ipi_mailbox_pmu1: mailbox@ff9905c0 {
 			bootph-all;
+			compatible = "xlnx,zynqmp-ipi-dest-mailbox";
 			reg = <0x0 0xff9905c0 0x0 0x20>,
 			      <0x0 0xff9905e0 0x0 0x20>,
 			      <0x0 0xff990e80 0x0 0x20>,
@@ -194,12 +195,12 @@
 				mbox-names = "tx", "rx";
 			};
 
-			nvmem_firmware {
+			nvmem-firmware {
 				compatible = "xlnx,zynqmp-nvmem-fw";
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				soc_revision: soc_revision@0 {
+				soc_revision: soc-revision@0 {
 					reg = <0x0 0x4>;
 				};
 			};
@@ -584,8 +585,6 @@
 				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0b0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x874>;
 			power-domains = <&zynqmp_firmware PD_ETH_0>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
@@ -600,8 +599,6 @@
 				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0c0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x875>;
 			power-domains = <&zynqmp_firmware PD_ETH_1>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
@@ -616,8 +613,6 @@
 				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0d0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x876>;
 			power-domains = <&zynqmp_firmware PD_ETH_2>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
@@ -632,8 +627,6 @@
 				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0e0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x877>;
 			power-domains = <&zynqmp_firmware PD_ETH_3>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
diff --git linux-libre-6.7-gnu/arch/arm64/boot/install.sh linux-libre-6.8-gnu/arch/arm64/boot/install.sh
index 7399d706967a..9b7a09808a3d 100755
--- linux-libre-6.7-gnu/arch/arm64/boot/install.sh
+++ linux-libre-6.8-gnu/arch/arm64/boot/install.sh
@@ -17,7 +17,8 @@
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
 
-if [ "$(basename $2)" = "Image.gz" ]; then
+if [ "$(basename $2)" = "Image.gz" ] || [ "$(basename $2)" = "vmlinuz.efi" ]
+then
 # Compressed install
   echo "Installing compressed kernel"
   base=vmlinuz
diff --git linux-libre-6.7-gnu/arch/arm64/configs/defconfig linux-libre-6.8-gnu/arch/arm64/configs/defconfig
index b60aa1f89343..e6cf3e5d63c3 100644
--- linux-libre-6.7-gnu/arch/arm64/configs/defconfig
+++ linux-libre-6.8-gnu/arch/arm64/configs/defconfig
@@ -30,6 +30,9 @@ CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
+CONFIG_KEXEC=y
+CONFIG_KEXEC_FILE=y
+CONFIG_CRASH_DUMP=y
 CONFIG_ARCH_ACTIONS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
@@ -77,9 +80,6 @@ CONFIG_ARM64_VA_BITS_48=y
 CONFIG_SCHED_MC=y
 CONFIG_SCHED_SMT=y
 CONFIG_NUMA=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_FILE=y
-CONFIG_CRASH_DUMP=y
 CONFIG_XEN=y
 CONFIG_COMPAT=y
 CONFIG_RANDOMIZE_BASE=y
@@ -180,8 +180,6 @@ CONFIG_NET_ACT_GATE=m
 CONFIG_QRTR_SMD=m
 CONFIG_QRTR_TUN=m
 CONFIG_CAN=m
-CONFIG_CAN_M_CAN=m
-CONFIG_CAN_M_CAN_PLATFORM=m
 CONFIG_BT=m
 CONFIG_BT_HIDP=m
 # CONFIG_BT_LE is not set
@@ -215,27 +213,27 @@ CONFIG_PCI_PASID=y
 CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=y
 CONFIG_PCI_AARDVARK=y
-CONFIG_PCI_TEGRA=y
-CONFIG_PCIE_RCAR_HOST=y
-CONFIG_PCIE_RCAR_EP=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_XGENE=y
 CONFIG_PCIE_ALTERA=y
 CONFIG_PCIE_ALTERA_MSI=y
+CONFIG_PCIE_BRCMSTB=m
 CONFIG_PCI_HOST_THUNDER_PEM=y
 CONFIG_PCI_HOST_THUNDER_ECAM=y
-CONFIG_PCIE_ROCKCHIP_HOST=m
+CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCIE_MEDIATEK_GEN3=m
-CONFIG_PCIE_BRCMSTB=m
+CONFIG_PCI_TEGRA=y
+CONFIG_PCIE_RCAR_HOST=y
+CONFIG_PCIE_RCAR_EP=y
+CONFIG_PCIE_ROCKCHIP_HOST=m
+CONFIG_PCI_XGENE=y
 CONFIG_PCI_IMX6_HOST=y
 CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_HISI=y
-CONFIG_PCIE_QCOM=y
-CONFIG_PCIE_ARMADA_8K=y
-CONFIG_PCIE_ROCKCHIP_DW_HOST=y
 CONFIG_PCIE_KIRIN=y
 CONFIG_PCIE_HISI_STB=y
+CONFIG_PCIE_ARMADA_8K=y
 CONFIG_PCIE_TEGRA194_HOST=m
+CONFIG_PCIE_QCOM=y
+CONFIG_PCIE_ROCKCHIP_DW_HOST=y
 CONFIG_PCIE_VISCONTI_HOST=y
 CONFIG_PCIE_LAYERSCAPE_GEN4=y
 CONFIG_PCI_ENDPOINT=y
@@ -252,9 +250,11 @@ CONFIG_ARM_SCPI_PROTOCOL=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_INTEL_STRATIX10_SERVICE=y
 CONFIG_INTEL_STRATIX10_RSU=m
+CONFIG_MTK_ADSP_IPC=m
 CONFIG_EFI_CAPSULE_LOADER=y
 CONFIG_IMX_SCU=y
-CONFIG_IMX_SCU_PD=y
+CONFIG_QCOM_QSEECOM=y
+CONFIG_QCOM_QSEECOM_UEFISECAPP=y
 CONFIG_GNSS=m
 CONFIG_GNSS_MTK_SERIAL=m
 CONFIG_MTD=y
@@ -276,15 +276,12 @@ CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_MTD_NAND_QCOM=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=m
-CONFIG_UBIFS_FS=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
 CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_NVME=m
 CONFIG_QCOM_COINCELL=m
 CONFIG_QCOM_FASTRPC=m
-CONFIG_BATTERY_QCOM_BATTMGR=m
-CONFIG_UCSI_PMIC_GLINK=m
 CONFIG_SRAM=y
 CONFIG_PCI_ENDPOINT_TEST=m
 CONFIG_EEPROM_AT24=m
@@ -368,6 +365,7 @@ CONFIG_SNI_NETSEC=y
 CONFIG_STMMAC_ETH=m
 CONFIG_DWMAC_TEGRA=m
 CONFIG_TI_K3_AM65_CPSW_NUSS=y
+CONFIG_TI_ICSSG_PRUETH=m
 CONFIG_QCOM_IPA=m
 CONFIG_MESON_GXL_PHY=m
 CONFIG_AQUANTIA_PHY=y
@@ -384,6 +382,8 @@ CONFIG_DP83869_PHY=m
 CONFIG_DP83TD510_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_CAN_FLEXCAN=m
+CONFIG_CAN_M_CAN=m
+CONFIG_CAN_M_CAN_PLATFORM=m
 CONFIG_CAN_RCAR=m
 CONFIG_CAN_RCAR_CANFD=m
 CONFIG_CAN_MCP251XFD=m
@@ -448,6 +448,7 @@ CONFIG_SERIO_AMBAKMI=y
 CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_BCM2835AUX=y
@@ -574,9 +575,9 @@ CONFIG_PINCTRL_IMX8DXL=y
 CONFIG_PINCTRL_IMX8ULP=y
 CONFIG_PINCTRL_IMX93=y
 CONFIG_PINCTRL_MSM=y
-CONFIG_PINCTRL_IPQ8074=y
 CONFIG_PINCTRL_IPQ5018=y
 CONFIG_PINCTRL_IPQ5332=y
+CONFIG_PINCTRL_IPQ8074=y
 CONFIG_PINCTRL_IPQ6018=y
 CONFIG_PINCTRL_IPQ9574=y
 CONFIG_PINCTRL_MSM8916=y
@@ -588,34 +589,37 @@ CONFIG_PINCTRL_MSM8998=y
 CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
 CONFIG_PINCTRL_QDF2XXX=y
-CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_PINCTRL_QDU1000=y
 CONFIG_PINCTRL_SA8775P=y
 CONFIG_PINCTRL_SC7180=y
 CONFIG_PINCTRL_SC7280=y
-CONFIG_PINCTRL_SC7280_LPASS_LPI=m
 CONFIG_PINCTRL_SC8180X=y
 CONFIG_PINCTRL_SC8280XP=y
 CONFIG_PINCTRL_SDM660=y
 CONFIG_PINCTRL_SDM670=y
 CONFIG_PINCTRL_SDM845=y
+CONFIG_PINCTRL_SDX75=y
+CONFIG_PINCTRL_SM4450=y
 CONFIG_PINCTRL_SM6115=y
-CONFIG_PINCTRL_SM6115_LPASS_LPI=m
 CONFIG_PINCTRL_SM6125=y
 CONFIG_PINCTRL_SM6350=y
 CONFIG_PINCTRL_SM6375=y
 CONFIG_PINCTRL_SM8150=y
 CONFIG_PINCTRL_SM8250=y
-CONFIG_PINCTRL_SM8250_LPASS_LPI=m
 CONFIG_PINCTRL_SM8350=y
-CONFIG_PINCTRL_SM8350_LPASS_LPI=m
 CONFIG_PINCTRL_SM8450=y
+CONFIG_PINCTRL_SM8550=y
+CONFIG_PINCTRL_SM8650=y
+CONFIG_PINCTRL_X1E80100=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_LPASS_LPI=m
+CONFIG_PINCTRL_SC7280_LPASS_LPI=m
+CONFIG_PINCTRL_SM6115_LPASS_LPI=m
+CONFIG_PINCTRL_SM8250_LPASS_LPI=m
+CONFIG_PINCTRL_SM8350_LPASS_LPI=m
 CONFIG_PINCTRL_SM8450_LPASS_LPI=m
 CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m
-CONFIG_PINCTRL_SM8550=y
 CONFIG_PINCTRL_SM8550_LPASS_LPI=m
-CONFIG_PINCTRL_LPASS_LPI=m
-CONFIG_GPIO_AGGREGATOR=m
 CONFIG_GPIO_ALTERA=m
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
@@ -624,6 +628,7 @@ CONFIG_GPIO_MPC8XXX=y
 CONFIG_GPIO_MXC=y
 CONFIG_GPIO_PL061=y
 CONFIG_GPIO_RCAR=y
+CONFIG_GPIO_SYSCON=y
 CONFIG_GPIO_UNIPHIER=y
 CONFIG_GPIO_VISCONTI=y
 CONFIG_GPIO_WCD934X=m
@@ -635,7 +640,7 @@ CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_BD9571MWV=m
 CONFIG_GPIO_MAX77620=y
 CONFIG_GPIO_SL28CPLD=m
-CONFIG_GPIO_SYSCON=y
+CONFIG_GPIO_AGGREGATOR=m
 CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_RESET_QCOM_PON=m
 CONFIG_POWER_RESET_XGENE=y
@@ -643,6 +648,7 @@ CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_SYSCON_REBOOT_MODE=y
 CONFIG_NVMEM_REBOOT_MODE=m
+CONFIG_BATTERY_QCOM_BATTMGR=m
 CONFIG_BATTERY_SBS=m
 CONFIG_BATTERY_BQ27XXX=y
 CONFIG_BATTERY_MAX17042=m
@@ -667,14 +673,16 @@ CONFIG_DEVFREQ_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
 CONFIG_IMX_SC_THERMAL=m
 CONFIG_IMX8MM_THERMAL=m
-CONFIG_QORIQ_THERMAL=m
 CONFIG_K3_THERMAL=m
+CONFIG_QORIQ_THERMAL=m
 CONFIG_SUN8I_THERMAL=y
 CONFIG_ROCKCHIP_THERMAL=m
 CONFIG_RCAR_THERMAL=y
 CONFIG_RCAR_GEN3_THERMAL=y
 CONFIG_RZG2L_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
+CONFIG_MTK_THERMAL=m
+CONFIG_MTK_LVTS_THERMAL=m
 CONFIG_BCM2711_THERMAL=m
 CONFIG_BCM2835_THERMAL=m
 CONFIG_BRCMSTB_THERMAL=m
@@ -694,6 +702,7 @@ CONFIG_ARM_SP805_WATCHDOG=y
 CONFIG_ARM_SBSA_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_DW_WATCHDOG=y
+CONFIG_K3_RTI_WATCHDOG=m
 CONFIG_SUNXI_WATCHDOG=m
 CONFIG_NPCM7XX_WATCHDOG=y
 CONFIG_IMX2_WDT=y
@@ -709,7 +718,6 @@ CONFIG_UNIPHIER_WATCHDOG=y
 CONFIG_PM8916_WATCHDOG=m
 CONFIG_BCM2835_WDT=y
 CONFIG_BCM7038_WDT=m
-CONFIG_K3_RTI_WATCHDOG=m
 CONFIG_MFD_ALTERA_SYSMGR=y
 CONFIG_MFD_BD9571MWV=y
 CONFIG_MFD_AXP20X_I2C=y
@@ -726,9 +734,9 @@ CONFIG_MFD_RK8XX_SPI=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_SL28CPLD=y
 CONFIG_RZ_MTU3=y
+CONFIG_MFD_TI_AM335X_TSCADC=m
 CONFIG_MFD_TPS65219=y
 CONFIG_MFD_TPS6594_I2C=m
-CONFIG_MFD_TI_AM335X_TSCADC=m
 CONFIG_MFD_ROHM_BD718XX=y
 CONFIG_MFD_WCD934X=m
 CONFIG_MFD_KHADAS_MCU=m
@@ -737,6 +745,7 @@ CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_BD718XX=y
 CONFIG_REGULATOR_BD9571MWV=y
 CONFIG_REGULATOR_CROS_EC=y
+CONFIG_REGULATOR_DA9211=m
 CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_HI6421V530=y
@@ -783,6 +792,7 @@ CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SDR_PLATFORM_DRIVERS=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_CADENCE_CSI2RX=m
 CONFIG_VIDEO_MEDIATEK_JPEG=m
 CONFIG_VIDEO_MEDIATEK_VCODEC=m
 CONFIG_VIDEO_IMX7_CSI=m
@@ -804,6 +814,7 @@ CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
 CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
 CONFIG_VIDEO_SUN6I_CSI=m
+CONFIG_VIDEO_TI_J721E_CSI2RX=m
 CONFIG_VIDEO_HANTRO=m
 CONFIG_VIDEO_IMX219=m
 CONFIG_VIDEO_IMX412=m
@@ -860,6 +871,7 @@ CONFIG_DRM_SAMSUNG_DSIM=m
 CONFIG_DRM_SII902X=m
 CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_THINE_THC63LVD1024=m
+CONFIG_DRM_TOSHIBA_TC358767=m
 CONFIG_DRM_TOSHIBA_TC358768=m
 CONFIG_DRM_TI_TFP410=m
 CONFIG_DRM_TI_SN65DSI83=m
@@ -877,17 +889,19 @@ CONFIG_DRM_ETNAVIV=m
 CONFIG_DRM_HISI_HIBMC=m
 CONFIG_DRM_HISI_KIRIN=m
 CONFIG_DRM_MEDIATEK=m
+CONFIG_DRM_MEDIATEK_DP=m
 CONFIG_DRM_MEDIATEK_HDMI=m
 CONFIG_DRM_MXSFB=m
-CONFIG_DRM_MESON=m
 CONFIG_DRM_IMX_LCDIF=m
+CONFIG_DRM_MESON=m
 CONFIG_DRM_PL111=m
 CONFIG_DRM_LIMA=m
 CONFIG_DRM_PANFROST=m
 CONFIG_DRM_TIDSS=m
+CONFIG_DRM_POWERVR=m
 CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_EFI=y
+CONFIG_FB_MODE_HELPERS=y
 CONFIG_BACKLIGHT_PWM=m
 CONFIG_BACKLIGHT_LP855X=m
 CONFIG_LOGO=y
@@ -913,6 +927,8 @@ CONFIG_SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=m
 CONFIG_SND_SOC_MT8183_DA7219_MAX98357A=m
 CONFIG_SND_SOC_MT8192=m
 CONFIG_SND_SOC_MT8192_MT6359_RT1015_RT5682=m
+CONFIG_SND_SOC_MT8195=m
+CONFIG_SND_SOC_MT8195_MT6359=m
 CONFIG_SND_MESON_AXG_SOUND_CARD=m
 CONFIG_SND_MESON_GX_SOUND_CARD=m
 CONFIG_SND_SOC_QCOM=m
@@ -920,6 +936,7 @@ CONFIG_SND_SOC_APQ8016_SBC=m
 CONFIG_SND_SOC_MSM8996=m
 CONFIG_SND_SOC_SDM845=m
 CONFIG_SND_SOC_SM8250=m
+CONFIG_SND_SOC_SC8280XP=m
 CONFIG_SND_SOC_SC7180=m
 CONFIG_SND_SOC_SC7280=m
 CONFIG_SND_SOC_ROCKCHIP=m
@@ -930,6 +947,10 @@ CONFIG_SND_SOC_RK3399_GRU_SOUND=m
 CONFIG_SND_SOC_SAMSUNG=y
 CONFIG_SND_SOC_RCAR=m
 CONFIG_SND_SOC_RZ=m
+CONFIG_SND_SOC_SOF_TOPLEVEL=y
+CONFIG_SND_SOC_SOF_OF=y
+CONFIG_SND_SOC_SOF_MTK_TOPLEVEL=y
+CONFIG_SND_SOC_SOF_MT8195=m
 CONFIG_SND_SUN8I_CODEC=m
 CONFIG_SND_SUN8I_CODEC_ANALOG=m
 CONFIG_SND_SUN50I_CODEC_ANALOG=m
@@ -950,6 +971,7 @@ CONFIG_SND_SOC_TEGRA210_ADX=m
 CONFIG_SND_SOC_TEGRA210_MIXER=m
 CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=m
 CONFIG_SND_SOC_DAVINCI_MCASP=m
+CONFIG_SND_SOC_J721E_EVM=m
 CONFIG_SND_SOC_AK4613=m
 CONFIG_SND_SOC_DA7213=m
 CONFIG_SND_SOC_ES7134=m
@@ -961,7 +983,6 @@ CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_PCM3168A_I2C=m
 CONFIG_SND_SOC_RK817=m
 CONFIG_SND_SOC_RT5640=m
-CONFIG_SND_SOC_J721E_EVM=m
 CONFIG_SND_SOC_RT5659=m
 CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
 CONFIG_SND_SOC_SIMPLE_MUX=m
@@ -977,6 +998,8 @@ CONFIG_SND_SOC_WM8960=m
 CONFIG_SND_SOC_WM8962=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_SOC_WSA881X=m
+CONFIG_SND_SOC_WSA883X=m
+CONFIG_SND_SOC_WSA884X=m
 CONFIG_SND_SOC_NAU8822=m
 CONFIG_SND_SOC_LPASS_WSA_MACRO=m
 CONFIG_SND_SOC_LPASS_VA_MACRO=m
@@ -1047,14 +1070,15 @@ CONFIG_TYPEC=m
 CONFIG_TYPEC_TCPM=m
 CONFIG_TYPEC_TCPCI=m
 CONFIG_TYPEC_FUSB302=m
-CONFIG_TYPEC_TPS6598X=m
-CONFIG_TYPEC_HD3SS3220=m
 CONFIG_TYPEC_QCOM_PMIC=m
 CONFIG_TYPEC_UCSI=m
-CONFIG_TYPEC_MUX_FSA4480=m
-CONFIG_TYPEC_MUX_NB7VPQ904M=m
 CONFIG_UCSI_CCG=m
+CONFIG_UCSI_PMIC_GLINK=m
+CONFIG_TYPEC_TPS6598X=m
+CONFIG_TYPEC_HD3SS3220=m
+CONFIG_TYPEC_MUX_FSA4480=m
 CONFIG_TYPEC_MUX_GPIO_SBU=m
+CONFIG_TYPEC_MUX_NB7VPQ904M=m
 CONFIG_TYPEC_DP_ALTMODE=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
@@ -1183,6 +1207,7 @@ CONFIG_CROS_EC=y
 CONFIG_CROS_EC_I2C=y
 CONFIG_CROS_EC_RPMSG=m
 CONFIG_CROS_EC_SPI=y
+CONFIG_CROS_KBD_LED_BACKLIGHT=m
 CONFIG_CROS_EC_CHARDEV=m
 CONFIG_COMMON_CLK_RK808=y
 CONFIG_COMMON_CLK_SCMI=y
@@ -1192,6 +1217,7 @@ CONFIG_COMMON_CLK_FSL_SAI=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_COMMON_CLK_PWM=y
 CONFIG_COMMON_CLK_RS9_PCIE=y
+CONFIG_COMMON_CLK_VC3=y
 CONFIG_COMMON_CLK_VC5=y
 CONFIG_COMMON_CLK_BD718XX=m
 CONFIG_CLK_RASPBERRYPI=m
@@ -1216,30 +1242,32 @@ CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y
 CONFIG_COMMON_CLK_MT8192_VDECSYS=y
 CONFIG_COMMON_CLK_MT8192_VENCSYS=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_CLK_X1E80100_GCC=y
 CONFIG_QCOM_A53PLL=y
 CONFIG_QCOM_CLK_APCS_MSM8916=y
 CONFIG_QCOM_CLK_APCC_MSM8996=y
 CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_QCOM_CLK_RPMH=y
 CONFIG_IPQ_APSS_6018=y
-CONFIG_IPQ_GCC_5332=y
 CONFIG_IPQ_APSS_5018=y
 CONFIG_IPQ_GCC_5018=y
+CONFIG_IPQ_GCC_5332=y
 CONFIG_IPQ_GCC_6018=y
 CONFIG_IPQ_GCC_8074=y
 CONFIG_IPQ_GCC_9574=y
 CONFIG_MSM_GCC_8916=y
+CONFIG_MSM_MMCC_8994=m
 CONFIG_MSM_GCC_8994=y
 CONFIG_MSM_GCC_8996=y
-CONFIG_MSM_MMCC_8994=m
 CONFIG_MSM_MMCC_8996=m
-CONFIG_MSM_MMCC_8998=m
 CONFIG_MSM_GCC_8998=y
+CONFIG_MSM_MMCC_8998=m
 CONFIG_QCM_GCC_2290=y
 CONFIG_QCM_DISPCC_2290=m
 CONFIG_QCS_GCC_404=y
-CONFIG_SA_GCC_8775P=y
+CONFIG_SC_CAMCC_8280XP=m
 CONFIG_SC_DISPCC_8280XP=m
+CONFIG_SA_GCC_8775P=y
 CONFIG_SA_GPUCC_8775P=m
 CONFIG_SC_GCC_7180=y
 CONFIG_SC_GCC_7280=y
@@ -1252,19 +1280,27 @@ CONFIG_SDM_GPUCC_845=y
 CONFIG_SDM_VIDEOCC_845=y
 CONFIG_SDM_DISPCC_845=y
 CONFIG_SDM_LPASSCC_845=m
+CONFIG_SDX_GCC_75=y
 CONFIG_SM_CAMCC_8250=m
 CONFIG_SM_DISPCC_6115=m
 CONFIG_SM_DISPCC_8250=y
 CONFIG_SM_DISPCC_8450=m
 CONFIG_SM_DISPCC_8550=m
+CONFIG_SM_DISPCC_8650=m
+CONFIG_SM_GCC_4450=y
 CONFIG_SM_GCC_6115=y
 CONFIG_SM_GCC_8350=y
 CONFIG_SM_GCC_8450=y
 CONFIG_SM_GCC_8550=y
-CONFIG_SM_TCSRCC_8550=y
+CONFIG_SM_GCC_8650=y
 CONFIG_SM_GPUCC_6115=m
 CONFIG_SM_GPUCC_8150=y
 CONFIG_SM_GPUCC_8250=y
+CONFIG_SM_GPUCC_8450=m
+CONFIG_SM_GPUCC_8550=m
+CONFIG_SM_GPUCC_8650=m
+CONFIG_SM_TCSRCC_8550=y
+CONFIG_SM_TCSRCC_8650=y
 CONFIG_SM_VIDEOCC_8250=y
 CONFIG_QCOM_HFPLL=y
 CONFIG_CLK_GFM_LPASS_SM8250=m
@@ -1279,6 +1315,7 @@ CONFIG_OMAP2PLUS_MBOX=m
 CONFIG_PLATFORM_MHU=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_QCOM_APCS_IPC=y
+CONFIG_MTK_ADSP_MBOX=m
 CONFIG_QCOM_IPCC=y
 CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_TEGRA_IOMMU_SMMU=y
@@ -1288,14 +1325,14 @@ CONFIG_MTK_IOMMU=y
 CONFIG_QCOM_IOMMU=y
 CONFIG_REMOTEPROC=y
 CONFIG_IMX_REMOTEPROC=y
-CONFIG_TI_K3_R5_REMOTEPROC=m
-CONFIG_TI_K3_DSP_REMOTEPROC=m
 CONFIG_MTK_SCP=m
 CONFIG_QCOM_Q6V5_ADSP=m
 CONFIG_QCOM_Q6V5_MSS=m
 CONFIG_QCOM_Q6V5_PAS=m
 CONFIG_QCOM_SYSMON=m
 CONFIG_QCOM_WCNSS_PIL=m
+CONFIG_TI_K3_DSP_REMOTEPROC=m
+CONFIG_TI_K3_R5_REMOTEPROC=m
 CONFIG_RPMSG_CHAR=m
 CONFIG_RPMSG_CTRL=m
 CONFIG_RPMSG_QCOM_GLINK_RPM=y
@@ -1304,8 +1341,6 @@ CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RPMSG_VIRTIO=y
 CONFIG_SOUNDWIRE=m
 CONFIG_SOUNDWIRE_QCOM=m
-CONFIG_OWL_PM_DOMAINS=y
-CONFIG_RASPBERRYPI_POWER=y
 CONFIG_FSL_DPAA=y
 CONFIG_FSL_MC_DPIO=y
 CONFIG_FSL_RCPM=y
@@ -1315,15 +1350,12 @@ CONFIG_MTK_PMIC_WRAP=y
 CONFIG_MTK_SVS=m
 CONFIG_QCOM_AOSS_QMP=y
 CONFIG_QCOM_COMMAND_DB=y
-CONFIG_QCOM_CPR=y
 CONFIG_QCOM_GENI_SE=y
 CONFIG_QCOM_LLCC=m
 CONFIG_QCOM_OCMEM=m
 CONFIG_QCOM_PMIC_GLINK=m
 CONFIG_QCOM_RMTFS_MEM=m
 CONFIG_QCOM_RPMH=y
-CONFIG_QCOM_RPMHPD=y
-CONFIG_QCOM_RPMPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
@@ -1355,14 +1387,20 @@ CONFIG_ARCH_R9A07G054=y
 CONFIG_ARCH_R9A08G045=y
 CONFIG_ARCH_R9A09G011=y
 CONFIG_ROCKCHIP_IODOMAIN=y
-CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
 CONFIG_ARCH_TEGRA_186_SOC=y
 CONFIG_ARCH_TEGRA_194_SOC=y
 CONFIG_ARCH_TEGRA_234_SOC=y
-CONFIG_TI_SCI_PM_DOMAINS=y
 CONFIG_TI_PRUSS=m
+CONFIG_OWL_PM_DOMAINS=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_IMX_SCU_PD=y
+CONFIG_QCOM_CPR=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+CONFIG_TI_SCI_PM_DOMAINS=y
 CONFIG_ARM_IMX_BUS_DEVFREQ=y
 CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m
 CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m
@@ -1421,6 +1459,7 @@ CONFIG_PHY_XGENE=y
 CONFIG_PHY_CAN_TRANSCEIVER=m
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_CADENCE_TORRENT=m
+CONFIG_PHY_CADENCE_DPHY_RX=m
 CONFIG_PHY_CADENCE_SIERRA=m
 CONFIG_PHY_MIXEL_MIPI_DPHY=m
 CONFIG_PHY_FSL_IMX8M_PCIE=y
@@ -1430,17 +1469,17 @@ CONFIG_PHY_HISI_INNO_USB2=y
 CONFIG_PHY_MVEBU_CP110_COMPHY=y
 CONFIG_PHY_MTK_TPHY=y
 CONFIG_PHY_QCOM_EDP=m
-CONFIG_PHY_QCOM_EUSB2_REPEATER=m
 CONFIG_PHY_QCOM_PCIE2=m
 CONFIG_PHY_QCOM_QMP=m
 CONFIG_PHY_QCOM_QUSB2=m
 CONFIG_PHY_QCOM_SNPS_EUSB2=m
+CONFIG_PHY_QCOM_EUSB2_REPEATER=m
+CONFIG_PHY_QCOM_M31_USB=m
 CONFIG_PHY_QCOM_USB_HS=m
 CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
 CONFIG_PHY_QCOM_USB_HS_28NM=m
 CONFIG_PHY_QCOM_USB_SS=m
 CONFIG_PHY_QCOM_SGMII_ETH=m
-CONFIG_PHY_QCOM_M31_USB=m
 CONFIG_PHY_R8A779F0_ETHERNET_SERDES=y
 CONFIG_PHY_RCAR_GEN3_PCIE=y
 CONFIG_PHY_RCAR_GEN3_USB2=y
@@ -1462,7 +1501,6 @@ CONFIG_PHY_J721E_WIZ=m
 CONFIG_ARM_CCI_PMU=m
 CONFIG_ARM_CCN=m
 CONFIG_ARM_CMN=m
-CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU=m
 CONFIG_ARM_SMMU_V3_PMU=m
 CONFIG_ARM_DSU_PMU=m
 CONFIG_FSL_IMX8_DDR_PMU=m
@@ -1471,6 +1509,7 @@ CONFIG_QCOM_L3_PMU=y
 CONFIG_ARM_SPE_PMU=m
 CONFIG_ARM_DMC620_PMU=m
 CONFIG_HISI_PMU=y
+CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU=m
 CONFIG_MESON_DDR_PMU=m
 CONFIG_NVMEM_LAYOUT_SL28_VPD=m
 CONFIG_NVMEM_IMX_OCOTP=y
@@ -1519,11 +1558,14 @@ CONFIG_INTERCONNECT_QCOM_SC7280=y
 CONFIG_INTERCONNECT_QCOM_SC8180X=y
 CONFIG_INTERCONNECT_QCOM_SC8280XP=y
 CONFIG_INTERCONNECT_QCOM_SDM845=y
+CONFIG_INTERCONNECT_QCOM_SDX75=y
 CONFIG_INTERCONNECT_QCOM_SM8150=m
 CONFIG_INTERCONNECT_QCOM_SM8250=m
 CONFIG_INTERCONNECT_QCOM_SM8350=m
 CONFIG_INTERCONNECT_QCOM_SM8450=y
 CONFIG_INTERCONNECT_QCOM_SM8550=y
+CONFIG_INTERCONNECT_QCOM_SM8650=y
+CONFIG_INTERCONNECT_QCOM_X1E80100=y
 CONFIG_COUNTER=m
 CONFIG_RZ_MTU3_CNT=m
 CONFIG_HTE=y
@@ -1546,6 +1588,7 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_EFIVAR_FS=y
+CONFIG_UBIFS_FS=m
 CONFIG_SQUASHFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
diff --git linux-libre-6.7-gnu/arch/arm64/crypto/Kconfig linux-libre-6.8-gnu/arch/arm64/crypto/Kconfig
index 6d06b448a66e..eb7b423ba463 100644
--- linux-libre-6.7-gnu/arch/arm64/crypto/Kconfig
+++ linux-libre-6.8-gnu/arch/arm64/crypto/Kconfig
@@ -231,7 +231,7 @@ config CRYPTO_SM4_ARM64_CE
 	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_SM4_ARM64_CE_BLK
-	tristate "Ciphers: SM4, modes: ECB/CBC/CFB/CTR/XTS (ARMv8 Crypto Extensions)"
+	tristate "Ciphers: SM4, modes: ECB/CBC/CTR/XTS (ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_SM4
@@ -240,7 +240,6 @@ config CRYPTO_SM4_ARM64_CE_BLK
 	  with block cipher modes:
 	  - ECB (Electronic Codebook) mode (NIST SP800-38A)
 	  - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
-	  - CFB (Cipher Feedback) mode (NIST SP800-38A)
 	  - CTR (Counter) mode (NIST SP800-38A)
 	  - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
 	    and IEEE 1619)
@@ -250,7 +249,7 @@ config CRYPTO_SM4_ARM64_CE_BLK
 	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_SM4_ARM64_NEON_BLK
-	tristate "Ciphers: SM4, modes: ECB/CBC/CFB/CTR (NEON)"
+	tristate "Ciphers: SM4, modes: ECB/CBC/CTR (NEON)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_SM4
@@ -259,7 +258,6 @@ config CRYPTO_SM4_ARM64_NEON_BLK
 	  with block cipher modes:
 	  - ECB (Electronic Codebook) mode (NIST SP800-38A)
 	  - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
-	  - CFB (Cipher Feedback) mode (NIST SP800-38A)
 	  - CTR (Counter) mode (NIST SP800-38A)
 
 	  Architecture: arm64 using:
diff --git linux-libre-6.7-gnu/arch/arm64/crypto/aes-neonbs-glue.c linux-libre-6.8-gnu/arch/arm64/crypto/aes-neonbs-glue.c
index bac4cabef607..467ac2f768ac 100644
--- linux-libre-6.7-gnu/arch/arm64/crypto/aes-neonbs-glue.c
+++ linux-libre-6.8-gnu/arch/arm64/crypto/aes-neonbs-glue.c
@@ -227,8 +227,19 @@ static int ctr_encrypt(struct skcipher_request *req)
 			src += blocks * AES_BLOCK_SIZE;
 		}
 		if (nbytes && walk.nbytes == walk.total) {
+			u8 buf[AES_BLOCK_SIZE];
+			u8 *d = dst;
+
+			if (unlikely(nbytes < AES_BLOCK_SIZE))
+				src = dst = memcpy(buf + sizeof(buf) - nbytes,
+						   src, nbytes);
+
 			neon_aes_ctr_encrypt(dst, src, ctx->enc, ctx->key.rounds,
 					     nbytes, walk.iv);
+
+			if (unlikely(nbytes < AES_BLOCK_SIZE))
+				memcpy(d, dst, nbytes);
+
 			nbytes = 0;
 		}
 		kernel_neon_end();
diff --git linux-libre-6.7-gnu/arch/arm64/crypto/sm4-ce-core.S linux-libre-6.8-gnu/arch/arm64/crypto/sm4-ce-core.S
index 877b80c54a0d..1f3625c2c67e 100644
--- linux-libre-6.7-gnu/arch/arm64/crypto/sm4-ce-core.S
+++ linux-libre-6.8-gnu/arch/arm64/crypto/sm4-ce-core.S
@@ -402,164 +402,6 @@ SYM_FUNC_START(sm4_ce_cbc_cts_dec)
 	ret
 SYM_FUNC_END(sm4_ce_cbc_cts_dec)
 
-.align 3
-SYM_FUNC_START(sm4_ce_cfb_enc)
-	/* input:
-	 *   x0: round key array, CTX
-	 *   x1: dst
-	 *   x2: src
-	 *   x3: iv (big endian, 128 bit)
-	 *   w4: nblocks
-	 */
-	SM4_PREPARE(x0)
-
-	ld1		{RIV.16b}, [x3]
-
-.Lcfb_enc_loop_4x:
-	cmp		w4, #4
-	blt		.Lcfb_enc_loop_1x
-
-	sub		w4, w4, #4
-
-	ld1		{v0.16b-v3.16b}, [x2], #64
-
-	rev32		v8.16b, RIV.16b
-	SM4_CRYPT_BLK_BE(v8)
-	eor		v0.16b, v0.16b, v8.16b
-
-	rev32		v8.16b, v0.16b
-	SM4_CRYPT_BLK_BE(v8)
-	eor		v1.16b, v1.16b, v8.16b
-
-	rev32		v8.16b, v1.16b
-	SM4_CRYPT_BLK_BE(v8)
-	eor		v2.16b, v2.16b, v8.16b
-
-	rev32		v8.16b, v2.16b
-	SM4_CRYPT_BLK_BE(v8)
-	eor		v3.16b, v3.16b, v8.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-	mov		RIV.16b, v3.16b
-
-	cbz		w4, .Lcfb_enc_end
-	b		.Lcfb_enc_loop_4x
-
-.Lcfb_enc_loop_1x:
-	sub		w4, w4, #1
-
-	ld1		{v0.16b}, [x2], #16
-
-	SM4_CRYPT_BLK(RIV)
-	eor		RIV.16b, RIV.16b, v0.16b
-
-	st1		{RIV.16b}, [x1], #16
-
-	cbnz		w4, .Lcfb_enc_loop_1x
-
-.Lcfb_enc_end:
-	/* store new IV */
-	st1		{RIV.16b}, [x3]
-
-	ret
-SYM_FUNC_END(sm4_ce_cfb_enc)
-
-.align 3
-SYM_FUNC_START(sm4_ce_cfb_dec)
-	/* input:
-	 *   x0: round key array, CTX
-	 *   x1: dst
-	 *   x2: src
-	 *   x3: iv (big endian, 128 bit)
-	 *   w4: nblocks
-	 */
-	SM4_PREPARE(x0)
-
-	ld1		{RIV.16b}, [x3]
-
-.Lcfb_dec_loop_8x:
-	sub		w4, w4, #8
-	tbnz		w4, #31, .Lcfb_dec_4x
-
-	ld1		{v0.16b-v3.16b}, [x2], #64
-	ld1		{v4.16b-v7.16b}, [x2], #64
-
-	rev32		v8.16b, RIV.16b
-	rev32		v9.16b, v0.16b
-	rev32		v10.16b, v1.16b
-	rev32		v11.16b, v2.16b
-	rev32		v12.16b, v3.16b
-	rev32		v13.16b, v4.16b
-	rev32		v14.16b, v5.16b
-	rev32		v15.16b, v6.16b
-
-	SM4_CRYPT_BLK8_BE(v8, v9, v10, v11, v12, v13, v14, v15)
-
-	mov		RIV.16b, v7.16b
-
-	eor		v0.16b, v0.16b, v8.16b
-	eor		v1.16b, v1.16b, v9.16b
-	eor		v2.16b, v2.16b, v10.16b
-	eor		v3.16b, v3.16b, v11.16b
-	eor		v4.16b, v4.16b, v12.16b
-	eor		v5.16b, v5.16b, v13.16b
-	eor		v6.16b, v6.16b, v14.16b
-	eor		v7.16b, v7.16b, v15.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-	st1		{v4.16b-v7.16b}, [x1], #64
-
-	cbz		w4, .Lcfb_dec_end
-	b		.Lcfb_dec_loop_8x
-
-.Lcfb_dec_4x:
-	add		w4, w4, #8
-	cmp		w4, #4
-	blt		.Lcfb_dec_loop_1x
-
-	sub		w4, w4, #4
-
-	ld1		{v0.16b-v3.16b}, [x2], #64
-
-	rev32		v8.16b, RIV.16b
-	rev32		v9.16b, v0.16b
-	rev32		v10.16b, v1.16b
-	rev32		v11.16b, v2.16b
-
-	SM4_CRYPT_BLK4_BE(v8, v9, v10, v11)
-
-	mov		RIV.16b, v3.16b
-
-	eor		v0.16b, v0.16b, v8.16b
-	eor		v1.16b, v1.16b, v9.16b
-	eor		v2.16b, v2.16b, v10.16b
-	eor		v3.16b, v3.16b, v11.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-
-	cbz		w4, .Lcfb_dec_end
-
-.Lcfb_dec_loop_1x:
-	sub		w4, w4, #1
-
-	ld1		{v0.16b}, [x2], #16
-
-	SM4_CRYPT_BLK(RIV)
-
-	eor		RIV.16b, RIV.16b, v0.16b
-	st1		{RIV.16b}, [x1], #16
-
-	mov		RIV.16b, v0.16b
-
-	cbnz		w4, .Lcfb_dec_loop_1x
-
-.Lcfb_dec_end:
-	/* store new IV */
-	st1		{RIV.16b}, [x3]
-
-	ret
-SYM_FUNC_END(sm4_ce_cfb_dec)
-
 .align 3
 SYM_FUNC_START(sm4_ce_ctr_enc)
 	/* input:
diff --git linux-libre-6.7-gnu/arch/arm64/crypto/sm4-ce-glue.c linux-libre-6.8-gnu/arch/arm64/crypto/sm4-ce-glue.c
index 0a2d32ed3bde..43741bed874e 100644
--- linux-libre-6.7-gnu/arch/arm64/crypto/sm4-ce-glue.c
+++ linux-libre-6.8-gnu/arch/arm64/crypto/sm4-ce-glue.c
@@ -37,10 +37,6 @@ asmlinkage void sm4_ce_cbc_cts_enc(const u32 *rkey, u8 *dst, const u8 *src,
 				   u8 *iv, unsigned int nbytes);
 asmlinkage void sm4_ce_cbc_cts_dec(const u32 *rkey, u8 *dst, const u8 *src,
 				   u8 *iv, unsigned int nbytes);
-asmlinkage void sm4_ce_cfb_enc(const u32 *rkey, u8 *dst, const u8 *src,
-			       u8 *iv, unsigned int nblks);
-asmlinkage void sm4_ce_cfb_dec(const u32 *rkey, u8 *dst, const u8 *src,
-			       u8 *iv, unsigned int nblks);
 asmlinkage void sm4_ce_ctr_enc(const u32 *rkey, u8 *dst, const u8 *src,
 			       u8 *iv, unsigned int nblks);
 asmlinkage void sm4_ce_xts_enc(const u32 *rkey1, u8 *dst, const u8 *src,
@@ -56,7 +52,6 @@ asmlinkage void sm4_ce_mac_update(const u32 *rkey_enc, u8 *digest,
 EXPORT_SYMBOL(sm4_ce_expand_key);
 EXPORT_SYMBOL(sm4_ce_crypt_block);
 EXPORT_SYMBOL(sm4_ce_cbc_enc);
-EXPORT_SYMBOL(sm4_ce_cfb_enc);
 
 struct sm4_xts_ctx {
 	struct sm4_ctx key1;
@@ -280,90 +275,6 @@ static int sm4_cbc_cts_decrypt(struct skcipher_request *req)
 	return sm4_cbc_cts_crypt(req, false);
 }
 
-static int sm4_cfb_encrypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-		unsigned int nblks;
-
-		kernel_neon_begin();
-
-		nblks = BYTES2BLKS(nbytes);
-		if (nblks) {
-			sm4_ce_cfb_enc(ctx->rkey_enc, dst, src, walk.iv, nblks);
-			dst += nblks * SM4_BLOCK_SIZE;
-			src += nblks * SM4_BLOCK_SIZE;
-			nbytes -= nblks * SM4_BLOCK_SIZE;
-		}
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			u8 keystream[SM4_BLOCK_SIZE];
-
-			sm4_ce_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		kernel_neon_end();
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
-static int sm4_cfb_decrypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-		unsigned int nblks;
-
-		kernel_neon_begin();
-
-		nblks = BYTES2BLKS(nbytes);
-		if (nblks) {
-			sm4_ce_cfb_dec(ctx->rkey_enc, dst, src, walk.iv, nblks);
-			dst += nblks * SM4_BLOCK_SIZE;
-			src += nblks * SM4_BLOCK_SIZE;
-			nbytes -= nblks * SM4_BLOCK_SIZE;
-		}
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			u8 keystream[SM4_BLOCK_SIZE];
-
-			sm4_ce_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		kernel_neon_end();
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
 static int sm4_ctr_crypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -542,22 +453,6 @@ static struct skcipher_alg sm4_algs[] = {
 		.setkey		= sm4_setkey,
 		.encrypt	= sm4_cbc_encrypt,
 		.decrypt	= sm4_cbc_decrypt,
-	}, {
-		.base = {
-			.cra_name		= "cfb(sm4)",
-			.cra_driver_name	= "cfb-sm4-ce",
-			.cra_priority		= 400,
-			.cra_blocksize		= 1,
-			.cra_ctxsize		= sizeof(struct sm4_ctx),
-			.cra_module		= THIS_MODULE,
-		},
-		.min_keysize	= SM4_KEY_SIZE,
-		.max_keysize	= SM4_KEY_SIZE,
-		.ivsize		= SM4_BLOCK_SIZE,
-		.chunksize	= SM4_BLOCK_SIZE,
-		.setkey		= sm4_setkey,
-		.encrypt	= sm4_cfb_encrypt,
-		.decrypt	= sm4_cfb_decrypt,
 	}, {
 		.base = {
 			.cra_name		= "ctr(sm4)",
@@ -869,12 +764,11 @@ static void __exit sm4_exit(void)
 module_cpu_feature_match(SM4, sm4_init);
 module_exit(sm4_exit);
 
-MODULE_DESCRIPTION("SM4 ECB/CBC/CFB/CTR/XTS using ARMv8 Crypto Extensions");
+MODULE_DESCRIPTION("SM4 ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions");
 MODULE_ALIAS_CRYPTO("sm4-ce");
 MODULE_ALIAS_CRYPTO("sm4");
 MODULE_ALIAS_CRYPTO("ecb(sm4)");
 MODULE_ALIAS_CRYPTO("cbc(sm4)");
-MODULE_ALIAS_CRYPTO("cfb(sm4)");
 MODULE_ALIAS_CRYPTO("ctr(sm4)");
 MODULE_ALIAS_CRYPTO("cts(cbc(sm4))");
 MODULE_ALIAS_CRYPTO("xts(sm4)");
diff --git linux-libre-6.7-gnu/arch/arm64/crypto/sm4-ce.h linux-libre-6.8-gnu/arch/arm64/crypto/sm4-ce.h
index 109c21b37590..1e235c4371eb 100644
--- linux-libre-6.7-gnu/arch/arm64/crypto/sm4-ce.h
+++ linux-libre-6.8-gnu/arch/arm64/crypto/sm4-ce.h
@@ -11,6 +11,3 @@ void sm4_ce_crypt_block(const u32 *rkey, u8 *dst, const u8 *src);
 
 void sm4_ce_cbc_enc(const u32 *rkey_enc, u8 *dst, const u8 *src,
 		    u8 *iv, unsigned int nblocks);
-
-void sm4_ce_cfb_enc(const u32 *rkey_enc, u8 *dst, const u8 *src,
-		    u8 *iv, unsigned int nblocks);
diff --git linux-libre-6.7-gnu/arch/arm64/crypto/sm4-neon-core.S linux-libre-6.8-gnu/arch/arm64/crypto/sm4-neon-core.S
index f295b4b7d70a..734dc7193610 100644
--- linux-libre-6.7-gnu/arch/arm64/crypto/sm4-neon-core.S
+++ linux-libre-6.8-gnu/arch/arm64/crypto/sm4-neon-core.S
@@ -437,119 +437,6 @@ SYM_FUNC_START(sm4_neon_cbc_dec)
 	ret
 SYM_FUNC_END(sm4_neon_cbc_dec)
 
-.align 3
-SYM_FUNC_START(sm4_neon_cfb_dec)
-	/* input:
-	 *   x0: round key array, CTX
-	 *   x1: dst
-	 *   x2: src
-	 *   x3: iv (big endian, 128 bit)
-	 *   w4: nblocks
-	 */
-	SM4_PREPARE()
-
-	ld1		{v0.16b}, [x3]
-
-.Lcfb_dec_loop_8x:
-	sub		w4, w4, #8
-	tbnz		w4, #31, .Lcfb_dec_4x
-
-	ld1		{v1.16b-v3.16b}, [x2], #48
-	ld4		{v4.4s-v7.4s}, [x2]
-
-	transpose_4x4(v0, v1, v2, v3)
-
-	SM4_CRYPT_BLK8(v0, v1, v2, v3, v4, v5, v6, v7)
-
-	sub		x2, x2, #48
-	ld1		{RTMP0.16b-RTMP3.16b}, [x2], #64
-	ld1		{RTMP4.16b-RTMP7.16b}, [x2], #64
-
-	eor		v0.16b, v0.16b, RTMP0.16b
-	eor		v1.16b, v1.16b, RTMP1.16b
-	eor		v2.16b, v2.16b, RTMP2.16b
-	eor		v3.16b, v3.16b, RTMP3.16b
-	eor		v4.16b, v4.16b, RTMP4.16b
-	eor		v5.16b, v5.16b, RTMP5.16b
-	eor		v6.16b, v6.16b, RTMP6.16b
-	eor		v7.16b, v7.16b, RTMP7.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-	st1		{v4.16b-v7.16b}, [x1], #64
-
-	mov		v0.16b, RTMP7.16b
-
-	cbz		w4, .Lcfb_dec_end
-	b		.Lcfb_dec_loop_8x
-
-.Lcfb_dec_4x:
-	add		w4, w4, #8
-	cmp		w4, #4
-	blt		.Lcfb_dec_tail
-
-	sub		w4, w4, #4
-
-	ld1		{v4.16b-v7.16b}, [x2], #64
-
-	rev32		v0.16b, v0.16b		/* v0 is IV register */
-	rev32		v1.16b, v4.16b
-	rev32		v2.16b, v5.16b
-	rev32		v3.16b, v6.16b
-
-	transpose_4x4(v0, v1, v2, v3)
-
-	SM4_CRYPT_BLK4_BE(v0, v1, v2, v3)
-
-	eor		v0.16b, v0.16b, v4.16b
-	eor		v1.16b, v1.16b, v5.16b
-	eor		v2.16b, v2.16b, v6.16b
-	eor		v3.16b, v3.16b, v7.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-
-	mov		v0.16b, v7.16b
-
-	cbz		w4, .Lcfb_dec_end
-
-.Lcfb_dec_tail:
-	cmp		w4, #2
-	ld1		{v4.16b}, [x2], #16
-	blt		.Lcfb_dec_tail_load_done
-	ld1		{v5.16b}, [x2], #16
-	beq		.Lcfb_dec_tail_load_done
-	ld1		{v6.16b}, [x2], #16
-
-.Lcfb_dec_tail_load_done:
-	rev32		v0.16b, v0.16b		/* v0 is IV register */
-	rev32		v1.16b, v4.16b
-	rev32		v2.16b, v5.16b
-
-	transpose_4x4(v0, v1, v2, v3)
-
-	SM4_CRYPT_BLK4_BE(v0, v1, v2, v3)
-
-	cmp		w4, #2
-	eor		v0.16b, v0.16b, v4.16b
-	st1		{v0.16b}, [x1], #16
-	mov		v0.16b, v4.16b
-	blt		.Lcfb_dec_end
-
-	eor		v1.16b, v1.16b, v5.16b
-	st1		{v1.16b}, [x1], #16
-	mov		v0.16b, v5.16b
-	beq		.Lcfb_dec_end
-
-	eor		v2.16b, v2.16b, v6.16b
-	st1		{v2.16b}, [x1], #16
-	mov		v0.16b, v6.16b
-
-.Lcfb_dec_end:
-	/* store new IV */
-	st1		{v0.16b}, [x3]
-
-	ret
-SYM_FUNC_END(sm4_neon_cfb_dec)
-
 .align 3
 SYM_FUNC_START(sm4_neon_ctr_crypt)
 	/* input:
diff --git linux-libre-6.7-gnu/arch/arm64/crypto/sm4-neon-glue.c linux-libre-6.8-gnu/arch/arm64/crypto/sm4-neon-glue.c
index 7b19accf5c03..e3500aca2d18 100644
--- linux-libre-6.7-gnu/arch/arm64/crypto/sm4-neon-glue.c
+++ linux-libre-6.8-gnu/arch/arm64/crypto/sm4-neon-glue.c
@@ -22,8 +22,6 @@ asmlinkage void sm4_neon_crypt(const u32 *rkey, u8 *dst, const u8 *src,
 			       unsigned int nblocks);
 asmlinkage void sm4_neon_cbc_dec(const u32 *rkey_dec, u8 *dst, const u8 *src,
 				 u8 *iv, unsigned int nblocks);
-asmlinkage void sm4_neon_cfb_dec(const u32 *rkey_enc, u8 *dst, const u8 *src,
-				 u8 *iv, unsigned int nblocks);
 asmlinkage void sm4_neon_ctr_crypt(const u32 *rkey_enc, u8 *dst, const u8 *src,
 				   u8 *iv, unsigned int nblocks);
 
@@ -142,90 +140,6 @@ static int sm4_cbc_decrypt(struct skcipher_request *req)
 	return err;
 }
 
-static int sm4_cfb_encrypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		u8 keystream[SM4_BLOCK_SIZE];
-		const u8 *iv = walk.iv;
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-
-		while (nbytes >= SM4_BLOCK_SIZE) {
-			sm4_crypt_block(ctx->rkey_enc, keystream, iv);
-			crypto_xor_cpy(dst, src, keystream, SM4_BLOCK_SIZE);
-			iv = dst;
-			src += SM4_BLOCK_SIZE;
-			dst += SM4_BLOCK_SIZE;
-			nbytes -= SM4_BLOCK_SIZE;
-		}
-		if (iv != walk.iv)
-			memcpy(walk.iv, iv, SM4_BLOCK_SIZE);
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			sm4_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
-static int sm4_cfb_decrypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-		unsigned int nblocks;
-
-		nblocks = nbytes / SM4_BLOCK_SIZE;
-		if (nblocks) {
-			kernel_neon_begin();
-
-			sm4_neon_cfb_dec(ctx->rkey_enc, dst, src,
-					 walk.iv, nblocks);
-
-			kernel_neon_end();
-
-			dst += nblocks * SM4_BLOCK_SIZE;
-			src += nblocks * SM4_BLOCK_SIZE;
-			nbytes -= nblocks * SM4_BLOCK_SIZE;
-		}
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			u8 keystream[SM4_BLOCK_SIZE];
-
-			sm4_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
 static int sm4_ctr_crypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -301,22 +215,6 @@ static struct skcipher_alg sm4_algs[] = {
 		.setkey		= sm4_setkey,
 		.encrypt	= sm4_cbc_encrypt,
 		.decrypt	= sm4_cbc_decrypt,
-	}, {
-		.base = {
-			.cra_name		= "cfb(sm4)",
-			.cra_driver_name	= "cfb-sm4-neon",
-			.cra_priority		= 200,
-			.cra_blocksize		= 1,
-			.cra_ctxsize		= sizeof(struct sm4_ctx),
-			.cra_module		= THIS_MODULE,
-		},
-		.min_keysize	= SM4_KEY_SIZE,
-		.max_keysize	= SM4_KEY_SIZE,
-		.ivsize		= SM4_BLOCK_SIZE,
-		.chunksize	= SM4_BLOCK_SIZE,
-		.setkey		= sm4_setkey,
-		.encrypt	= sm4_cfb_encrypt,
-		.decrypt	= sm4_cfb_decrypt,
 	}, {
 		.base = {
 			.cra_name		= "ctr(sm4)",
@@ -349,12 +247,11 @@ static void __exit sm4_exit(void)
 module_init(sm4_init);
 module_exit(sm4_exit);
 
-MODULE_DESCRIPTION("SM4 ECB/CBC/CFB/CTR using ARMv8 NEON");
+MODULE_DESCRIPTION("SM4 ECB/CBC/CTR using ARMv8 NEON");
 MODULE_ALIAS_CRYPTO("sm4-neon");
 MODULE_ALIAS_CRYPTO("sm4");
 MODULE_ALIAS_CRYPTO("ecb(sm4)");
 MODULE_ALIAS_CRYPTO("cbc(sm4)");
-MODULE_ALIAS_CRYPTO("cfb(sm4)");
 MODULE_ALIAS_CRYPTO("ctr(sm4)");
 MODULE_AUTHOR("Tianjia Zhang <tianjia.zhang@linux.alibaba.com>");
 MODULE_LICENSE("GPL v2");
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/alternative-macros.h linux-libre-6.8-gnu/arch/arm64/include/asm/alternative-macros.h
index 210bb43cff2c..d328f549b1a6 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/alternative-macros.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/alternative-macros.h
@@ -229,7 +229,7 @@ alternative_has_cap_likely(const unsigned long cpucap)
 	if (!cpucap_is_possible(cpucap))
 		return false;
 
-	asm_volatile_goto(
+	asm goto(
 	ALTERNATIVE_CB("b	%l[l_no]", %[cpucap], alt_cb_patch_nops)
 	:
 	: [cpucap] "i" (cpucap)
@@ -247,7 +247,7 @@ alternative_has_cap_unlikely(const unsigned long cpucap)
 	if (!cpucap_is_possible(cpucap))
 		return false;
 
-	asm_volatile_goto(
+	asm goto(
 	ALTERNATIVE("nop", "b	%l[l_yes]", %[cpucap])
 	:
 	: [cpucap] "i" (cpucap)
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/assembler.h linux-libre-6.8-gnu/arch/arm64/include/asm/assembler.h
index 376a980f2bad..513787e43329 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/assembler.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/assembler.h
@@ -12,7 +12,7 @@
 #ifndef __ASM_ASSEMBLER_H
 #define __ASM_ASSEMBLER_H
 
-#include <asm-generic/export.h>
+#include <linux/export.h>
 
 #include <asm/alternative.h>
 #include <asm/asm-bug.h>
@@ -760,32 +760,25 @@ alternative_endif
 .endm
 
 	/*
-	 * Check whether preempt/bh-disabled asm code should yield as soon as
-	 * it is able. This is the case if we are currently running in task
-	 * context, and either a softirq is pending, or the TIF_NEED_RESCHED
-	 * flag is set and re-enabling preemption a single time would result in
-	 * a preempt count of zero. (Note that the TIF_NEED_RESCHED flag is
-	 * stored negated in the top word of the thread_info::preempt_count
+	 * Check whether asm code should yield as soon as it is able. This is
+	 * the case if we are currently running in task context, and the
+	 * TIF_NEED_RESCHED flag is set. (Note that the TIF_NEED_RESCHED flag
+	 * is stored negated in the top word of the thread_info::preempt_count
 	 * field)
 	 */
-	.macro		cond_yield, lbl:req, tmp:req, tmp2:req
+	.macro		cond_yield, lbl:req, tmp:req, tmp2
+#ifdef CONFIG_PREEMPT_VOLUNTARY
 	get_current_task \tmp
 	ldr		\tmp, [\tmp, #TSK_TI_PREEMPT]
 	/*
 	 * If we are serving a softirq, there is no point in yielding: the
 	 * softirq will not be preempted no matter what we do, so we should
-	 * run to completion as quickly as we can.
+	 * run to completion as quickly as we can. The preempt_count field will
+	 * have BIT(SOFTIRQ_SHIFT) set in this case, so the zero check will
+	 * catch this case too.
 	 */
-	tbnz		\tmp, #SOFTIRQ_SHIFT, .Lnoyield_\@
-#ifdef CONFIG_PREEMPTION
-	sub		\tmp, \tmp, #PREEMPT_DISABLE_OFFSET
 	cbz		\tmp, \lbl
 #endif
-	adr_l		\tmp, irq_stat + IRQ_CPUSTAT_SOFTIRQ_PENDING
-	get_this_cpu_offset	\tmp2
-	ldr		w\tmp, [\tmp, \tmp2]
-	cbnz		w\tmp, \lbl	// yield on pending softirq in task context
-.Lnoyield_\@:
 	.endm
 
 /*
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/cache.h linux-libre-6.8-gnu/arch/arm64/include/asm/cache.h
index ceb368d33bf4..06a4670bdb0b 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/cache.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/cache.h
@@ -58,7 +58,6 @@ static inline unsigned int arch_slab_minalign(void)
 #define CTR_L1IP(ctr)		SYS_FIELD_GET(CTR_EL0, L1Ip, ctr)
 
 #define ICACHEF_ALIASING	0
-#define ICACHEF_VPIPT		1
 extern unsigned long __icache_flags;
 
 /*
@@ -70,11 +69,6 @@ static inline int icache_is_aliasing(void)
 	return test_bit(ICACHEF_ALIASING, &__icache_flags);
 }
 
-static __always_inline int icache_is_vpipt(void)
-{
-	return test_bit(ICACHEF_VPIPT, &__icache_flags);
-}
-
 static inline u32 cache_type_cwg(void)
 {
 	return SYS_FIELD_GET(CTR_EL0, CWG, read_cpuid_cachetype());
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/cpu.h linux-libre-6.8-gnu/arch/arm64/include/asm/cpu.h
index f3034099fd95..b1e43f56ee46 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/cpu.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/cpu.h
@@ -38,7 +38,6 @@ struct cpuinfo_32bit {
 };
 
 struct cpuinfo_arm64 {
-	struct cpu	cpu;
 	struct kobject	kobj;
 	u64		reg_ctr;
 	u64		reg_cntfrq;
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/cpufeature.h linux-libre-6.8-gnu/arch/arm64/include/asm/cpufeature.h
index f6d416fe49b0..bd8d4ca81a48 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/cpufeature.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/cpufeature.h
@@ -83,7 +83,7 @@ struct arm64_ftr_bits {
  * to full-0 denotes that this field has no override
  *
  * A @mask field set to full-0 with the corresponding @val field set
- * to full-1 denotes thath this field has an invalid override.
+ * to full-1 denotes that this field has an invalid override.
  */
 struct arm64_ftr_override {
 	u64		val;
@@ -617,6 +617,7 @@ static inline bool id_aa64pfr1_mte(u64 pfr1)
 	return val >= ID_AA64PFR1_EL1_MTE_MTE2;
 }
 
+void __init setup_boot_cpu_features(void);
 void __init setup_system_features(void);
 void __init setup_user_features(void);
 
@@ -819,6 +820,11 @@ static inline bool system_supports_tlb_range(void)
 	return alternative_has_cap_unlikely(ARM64_HAS_TLB_RANGE);
 }
 
+static inline bool system_supports_lpa2(void)
+{
+	return cpus_have_final_cap(ARM64_HAS_LPA2);
+}
+
 int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
 bool try_emulate_mrs(struct pt_regs *regs, u32 isn);
 
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/cputype.h linux-libre-6.8-gnu/arch/arm64/include/asm/cputype.h
index 7c7493cb571f..52f076afeb96 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/cputype.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/cputype.h
@@ -61,6 +61,7 @@
 #define ARM_CPU_IMP_HISI		0x48
 #define ARM_CPU_IMP_APPLE		0x61
 #define ARM_CPU_IMP_AMPERE		0xC0
+#define ARM_CPU_IMP_MICROSOFT		0x6D
 
 #define ARM_CPU_PART_AEM_V8		0xD0F
 #define ARM_CPU_PART_FOUNDATION		0xD00
@@ -135,6 +136,8 @@
 
 #define AMPERE_CPU_PART_AMPERE1		0xAC3
 
+#define MICROSOFT_CPU_PART_AZURE_COBALT_100	0xD49 /* Based on r0p0 of ARM Neoverse N2 */
+
 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
 #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
 #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72)
@@ -193,6 +196,7 @@
 #define MIDR_APPLE_M2_BLIZZARD_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_BLIZZARD_MAX)
 #define MIDR_APPLE_M2_AVALANCHE_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_AVALANCHE_MAX)
 #define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1)
+#define MIDR_MICROSOFT_AZURE_COBALT_100 MIDR_CPU_MODEL(ARM_CPU_IMP_MICROSOFT, MICROSOFT_CPU_PART_AZURE_COBALT_100)
 
 /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */
 #define MIDR_FUJITSU_ERRATUM_010001		MIDR_FUJITSU_A64FX
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/esr.h linux-libre-6.8-gnu/arch/arm64/include/asm/esr.h
index ae35939f395b..353fe08546cf 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/esr.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/esr.h
@@ -392,6 +392,21 @@ static inline bool esr_is_data_abort(unsigned long esr)
 	return ec == ESR_ELx_EC_DABT_LOW || ec == ESR_ELx_EC_DABT_CUR;
 }
 
+static inline bool esr_fsc_is_translation_fault(unsigned long esr)
+{
+	return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_FAULT;
+}
+
+static inline bool esr_fsc_is_permission_fault(unsigned long esr)
+{
+	return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_PERM;
+}
+
+static inline bool esr_fsc_is_access_flag_fault(unsigned long esr)
+{
+	return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_ACCESS;
+}
+
 const char *esr_get_class_string(unsigned long esr);
 #endif /* __ASSEMBLY */
 
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/fpsimd.h linux-libre-6.8-gnu/arch/arm64/include/asm/fpsimd.h
index 50e5f25d3024..b67b89c54e1c 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/fpsimd.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/fpsimd.h
@@ -62,13 +62,13 @@ static inline void cpacr_restore(unsigned long cpacr)
  * When we defined the maximum SVE vector length we defined the ABI so
  * that the maximum vector length included all the reserved for future
  * expansion bits in ZCR rather than those just currently defined by
- * the architecture. While SME follows a similar pattern the fact that
- * it includes a square matrix means that any allocations that attempt
- * to cover the maximum potential vector length (such as happen with
- * the regset used for ptrace) end up being extremely large. Define
- * the much lower actual limit for use in such situations.
+ * the architecture.  Using this length to allocate worst size buffers
+ * results in excessively large allocations, and this effect is even
+ * more pronounced for SME due to ZA.  Define more suitable VLs for
+ * these situations.
  */
-#define SME_VQ_MAX	16
+#define ARCH_SVE_VQ_MAX ((ZCR_ELx_LEN_MASK >> ZCR_ELx_LEN_SHIFT) + 1)
+#define SME_VQ_MAX	((SMCR_ELx_LEN_MASK >> SMCR_ELx_LEN_SHIFT) + 1)
 
 struct task_struct;
 
@@ -386,6 +386,7 @@ extern void sme_alloc(struct task_struct *task, bool flush);
 extern unsigned int sme_get_vl(void);
 extern int sme_set_current_vl(unsigned long arg);
 extern int sme_get_current_vl(void);
+extern void sme_suspend_exit(void);
 
 /*
  * Return how many bytes of memory are required to store the full SME
@@ -421,6 +422,7 @@ static inline int sme_max_vl(void) { return 0; }
 static inline int sme_max_virtualisable_vl(void) { return 0; }
 static inline int sme_set_current_vl(unsigned long arg) { return -EINVAL; }
 static inline int sme_get_current_vl(void) { return -EINVAL; }
+static inline void sme_suspend_exit(void) { }
 
 static inline size_t sme_state_size(struct task_struct const *task)
 {
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/fpsimdmacros.h linux-libre-6.8-gnu/arch/arm64/include/asm/fpsimdmacros.h
index cdf6a35e3994..cda81d009c9b 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/fpsimdmacros.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/fpsimdmacros.h
@@ -242,14 +242,6 @@
 		| (\nx << 5)
 .endm
 
-/*
- * Zero the entire ZA array
- *	ZERO ZA
- */
-.macro zero_za
-	.inst 0xc00800ff
-.endm
-
 .macro __for from:req, to:req
 	.if (\from) == (\to)
 		_for__body %\from
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/irq.h linux-libre-6.8-gnu/arch/arm64/include/asm/irq.h
index 50ce8b697ff3..e93548914c36 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/irq.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/irq.h
@@ -4,6 +4,8 @@
 
 #ifndef __ASSEMBLER__
 
+#include <linux/cpumask.h>
+
 #include <asm-generic/irq.h>
 
 void arch_trigger_cpumask_backtrace(const cpumask_t *mask, int exclude_cpu);
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/irq_work.h linux-libre-6.8-gnu/arch/arm64/include/asm/irq_work.h
index 81bbfa3a035b..a1020285ea75 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/irq_work.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/irq_work.h
@@ -2,8 +2,6 @@
 #ifndef __ASM_IRQ_WORK_H
 #define __ASM_IRQ_WORK_H
 
-extern void arch_irq_work_raise(void);
-
 static inline bool arch_irq_work_has_interrupt(void)
 {
 	return true;
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/jump_label.h linux-libre-6.8-gnu/arch/arm64/include/asm/jump_label.h
index 48ddc0f45d22..6aafbb789991 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/jump_label.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/jump_label.h
@@ -18,7 +18,7 @@
 static __always_inline bool arch_static_branch(struct static_key * const key,
 					       const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	nop					\n\t"
 		 "	.pushsection	__jump_table, \"aw\"	\n\t"
 		 "	.align		3			\n\t"
@@ -35,7 +35,7 @@ l_yes:
 static __always_inline bool arch_static_branch_jump(struct static_key * const key,
 						    const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	b		%l[l_yes]		\n\t"
 		 "	.pushsection	__jump_table, \"aw\"	\n\t"
 		 "	.align		3			\n\t"
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/kasan.h linux-libre-6.8-gnu/arch/arm64/include/asm/kasan.h
index 12d5f47f7dbe..7eefc525a9df 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/kasan.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/kasan.h
@@ -15,29 +15,9 @@
 
 #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
 
+asmlinkage void kasan_early_init(void);
 void kasan_init(void);
-
-/*
- * KASAN_SHADOW_START: beginning of the kernel virtual addresses.
- * KASAN_SHADOW_END: KASAN_SHADOW_START + 1/N of kernel virtual addresses,
- * where N = (1 << KASAN_SHADOW_SCALE_SHIFT).
- *
- * KASAN_SHADOW_OFFSET:
- * This value is used to map an address to the corresponding shadow
- * address by the following formula:
- *     shadow_addr = (address >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET
- *
- * (1 << (64 - KASAN_SHADOW_SCALE_SHIFT)) shadow addresses that lie in range
- * [KASAN_SHADOW_OFFSET, KASAN_SHADOW_END) cover all 64-bits of virtual
- * addresses. So KASAN_SHADOW_OFFSET should satisfy the following equation:
- *      KASAN_SHADOW_OFFSET = KASAN_SHADOW_END -
- *				(1ULL << (64 - KASAN_SHADOW_SCALE_SHIFT))
- */
-#define _KASAN_SHADOW_START(va)	(KASAN_SHADOW_END - (1UL << ((va) - KASAN_SHADOW_SCALE_SHIFT)))
-#define KASAN_SHADOW_START      _KASAN_SHADOW_START(vabits_actual)
-
 void kasan_copy_shadow(pgd_t *pgdir);
-asmlinkage void kasan_early_init(void);
 
 #else
 static inline void kasan_init(void) { }
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/kernel-pgtable.h linux-libre-6.8-gnu/arch/arm64/include/asm/kernel-pgtable.h
index 85d26143faa5..83ddb14b95a5 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/kernel-pgtable.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/kernel-pgtable.h
@@ -37,27 +37,12 @@
 
 
 /*
- * If KASLR is enabled, then an offset K is added to the kernel address
- * space. The bottom 21 bits of this offset are zero to guarantee 2MB
- * alignment for PA and VA.
- *
- * For each pagetable level of the swapper, we know that the shift will
- * be larger than 21 (for the 4KB granule case we use section maps thus
- * the smallest shift is actually 30) thus there is the possibility that
- * KASLR can increase the number of pagetable entries by 1, so we make
- * room for this extra entry.
- *
- * Note KASLR cannot increase the number of required entries for a level
- * by more than one because it increments both the virtual start and end
- * addresses equally (the extra entry comes from the case where the end
- * address is just pushed over a boundary and the start address isn't).
+ * A relocatable kernel may execute from an address that differs from the one at
+ * which it was linked. In the worst case, its runtime placement may intersect
+ * with two adjacent PGDIR entries, which means that an additional page table
+ * may be needed at each subordinate level.
  */
-
-#ifdef CONFIG_RANDOMIZE_BASE
-#define EARLY_KASLR	(1)
-#else
-#define EARLY_KASLR	(0)
-#endif
+#define EXTRA_PAGE	__is_defined(CONFIG_RELOCATABLE)
 
 #define SPAN_NR_ENTRIES(vstart, vend, shift) \
 	((((vend) - 1) >> (shift)) - ((vstart) >> (shift)) + 1)
@@ -83,7 +68,7 @@
 			+ EARLY_PGDS((vstart), (vend), add) 	/* each PGDIR needs a next level page table */	\
 			+ EARLY_PUDS((vstart), (vend), add)	/* each PUD needs a next level page table */	\
 			+ EARLY_PMDS((vstart), (vend), add))	/* each PMD needs a next level page table */
-#define INIT_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR, _end, EARLY_KASLR))
+#define INIT_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR, _end, EXTRA_PAGE))
 
 /* the initial ID map may need two extra pages if it needs to be extended */
 #if VA_BITS < 48
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_arm.h linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_arm.h
index b85f46a73e21..3c6f8ba1e479 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_arm.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_arm.h
@@ -108,6 +108,7 @@
 #define HCRX_HOST_FLAGS (HCRX_EL2_MSCEn | HCRX_EL2_TCR2En)
 
 /* TCR_EL2 Registers bits */
+#define TCR_EL2_DS		(1UL << 32)
 #define TCR_EL2_RES1		((1U << 31) | (1 << 23))
 #define TCR_EL2_TBI		(1 << 20)
 #define TCR_EL2_PS_SHIFT	16
@@ -122,6 +123,7 @@
 			 TCR_EL2_ORGN0_MASK | TCR_EL2_IRGN0_MASK | TCR_EL2_T0SZ_MASK)
 
 /* VTCR_EL2 Registers bits */
+#define VTCR_EL2_DS		TCR_EL2_DS
 #define VTCR_EL2_RES1		(1U << 31)
 #define VTCR_EL2_HD		(1 << 22)
 #define VTCR_EL2_HA		(1 << 21)
@@ -344,36 +346,47 @@
  * Once we get to a point where the two describe the same thing, we'll
  * merge the definitions. One day.
  */
-#define __HFGRTR_EL2_RES0	(GENMASK(63, 56) | GENMASK(53, 51))
+#define __HFGRTR_EL2_RES0	HFGxTR_EL2_RES0
 #define __HFGRTR_EL2_MASK	GENMASK(49, 0)
-#define __HFGRTR_EL2_nMASK	(GENMASK(58, 57) | GENMASK(55, 54) | BIT(50))
+#define __HFGRTR_EL2_nMASK	~(__HFGRTR_EL2_RES0 | __HFGRTR_EL2_MASK)
 
-#define __HFGWTR_EL2_RES0	(GENMASK(63, 56) | GENMASK(53, 51) |	\
-				 BIT(46) | BIT(42) | BIT(40) | BIT(28) | \
-				 GENMASK(26, 25) | BIT(21) | BIT(18) |	\
+/*
+ * The HFGWTR bits are a subset of HFGRTR bits. To ensure we don't miss any
+ * future additions, define __HFGWTR* macros relative to __HFGRTR* ones.
+ */
+#define __HFGRTR_ONLY_MASK	(BIT(46) | BIT(42) | BIT(40) | BIT(28) | \
+				 GENMASK(26, 25) | BIT(21) | BIT(18) | \
 				 GENMASK(15, 14) | GENMASK(10, 9) | BIT(2))
-#define __HFGWTR_EL2_MASK	GENMASK(49, 0)
-#define __HFGWTR_EL2_nMASK	(GENMASK(58, 57) | GENMASK(55, 54) | BIT(50))
-
-#define __HFGITR_EL2_RES0	GENMASK(63, 57)
-#define __HFGITR_EL2_MASK	GENMASK(54, 0)
-#define __HFGITR_EL2_nMASK	GENMASK(56, 55)
-
-#define __HDFGRTR_EL2_RES0	(BIT(49) | BIT(42) | GENMASK(39, 38) |	\
-				 GENMASK(21, 20) | BIT(8))
-#define __HDFGRTR_EL2_MASK	~__HDFGRTR_EL2_nMASK
-#define __HDFGRTR_EL2_nMASK	GENMASK(62, 59)
-
-#define __HDFGWTR_EL2_RES0	(BIT(63) | GENMASK(59, 58) | BIT(51) | BIT(47) | \
-				 BIT(43) | GENMASK(40, 38) | BIT(34) | BIT(30) | \
-				 BIT(22) | BIT(9) | BIT(6))
-#define __HDFGWTR_EL2_MASK	~__HDFGWTR_EL2_nMASK
-#define __HDFGWTR_EL2_nMASK	GENMASK(62, 60)
+#define __HFGWTR_EL2_RES0	(__HFGRTR_EL2_RES0 | __HFGRTR_ONLY_MASK)
+#define __HFGWTR_EL2_MASK	(__HFGRTR_EL2_MASK & ~__HFGRTR_ONLY_MASK)
+#define __HFGWTR_EL2_nMASK	~(__HFGWTR_EL2_RES0 | __HFGWTR_EL2_MASK)
+
+#define __HFGITR_EL2_RES0	HFGITR_EL2_RES0
+#define __HFGITR_EL2_MASK	(BIT(62) | BIT(60) | GENMASK(54, 0))
+#define __HFGITR_EL2_nMASK	~(__HFGITR_EL2_RES0 | __HFGITR_EL2_MASK)
+
+#define __HDFGRTR_EL2_RES0	HDFGRTR_EL2_RES0
+#define __HDFGRTR_EL2_MASK	(BIT(63) | GENMASK(58, 50) | GENMASK(48, 43) | \
+				 GENMASK(41, 40) | GENMASK(37, 22) | \
+				 GENMASK(19, 9) | GENMASK(7, 0))
+#define __HDFGRTR_EL2_nMASK	~(__HDFGRTR_EL2_RES0 | __HDFGRTR_EL2_MASK)
+
+#define __HDFGWTR_EL2_RES0	HDFGWTR_EL2_RES0
+#define __HDFGWTR_EL2_MASK	(GENMASK(57, 52) | GENMASK(50, 48) | \
+				 GENMASK(46, 44) | GENMASK(42, 41) | \
+				 GENMASK(37, 35) | GENMASK(33, 31) | \
+				 GENMASK(29, 23) | GENMASK(21, 10) | \
+				 GENMASK(8, 7) | GENMASK(5, 0))
+#define __HDFGWTR_EL2_nMASK	~(__HDFGWTR_EL2_RES0 | __HDFGWTR_EL2_MASK)
+
+#define __HAFGRTR_EL2_RES0	HAFGRTR_EL2_RES0
+#define __HAFGRTR_EL2_MASK	(GENMASK(49, 17) | GENMASK(4, 0))
+#define __HAFGRTR_EL2_nMASK	~(__HAFGRTR_EL2_RES0 | __HAFGRTR_EL2_MASK)
 
 /* Similar definitions for HCRX_EL2 */
-#define __HCRX_EL2_RES0		(GENMASK(63, 16) | GENMASK(13, 12))
-#define __HCRX_EL2_MASK		(0)
-#define __HCRX_EL2_nMASK	(GENMASK(15, 14) | GENMASK(4, 0))
+#define __HCRX_EL2_RES0         HCRX_EL2_RES0
+#define __HCRX_EL2_MASK		(BIT(6))
+#define __HCRX_EL2_nMASK	~(__HCRX_EL2_RES0 | __HCRX_EL2_MASK)
 
 /* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */
 #define HPFAR_MASK	(~UL(0xf))
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_emulate.h linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_emulate.h
index 78a550537b67..b804fe832184 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_emulate.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_emulate.h
@@ -17,6 +17,7 @@
 #include <asm/esr.h>
 #include <asm/kvm_arm.h>
 #include <asm/kvm_hyp.h>
+#include <asm/kvm_nested.h>
 #include <asm/ptrace.h>
 #include <asm/cputype.h>
 #include <asm/virt.h>
@@ -54,11 +55,6 @@ void kvm_emulate_nested_eret(struct kvm_vcpu *vcpu);
 int kvm_inject_nested_sync(struct kvm_vcpu *vcpu, u64 esr_el2);
 int kvm_inject_nested_irq(struct kvm_vcpu *vcpu);
 
-static inline bool vcpu_has_feature(const struct kvm_vcpu *vcpu, int feature)
-{
-	return test_bit(feature, vcpu->kvm->arch.vcpu_features);
-}
-
 #if defined(__KVM_VHE_HYPERVISOR__) || defined(__KVM_NVHE_HYPERVISOR__)
 static __always_inline bool vcpu_el1_is_32bit(struct kvm_vcpu *vcpu)
 {
@@ -248,7 +244,7 @@ static inline bool __is_hyp_ctxt(const struct kvm_cpu_context *ctxt)
 
 static inline bool is_hyp_ctxt(const struct kvm_vcpu *vcpu)
 {
-	return __is_hyp_ctxt(&vcpu->arch.ctxt);
+	return vcpu_has_nv(vcpu) && __is_hyp_ctxt(&vcpu->arch.ctxt);
 }
 
 /*
@@ -404,14 +400,25 @@ static __always_inline u8 kvm_vcpu_trap_get_fault(const struct kvm_vcpu *vcpu)
 	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC;
 }
 
-static __always_inline u8 kvm_vcpu_trap_get_fault_type(const struct kvm_vcpu *vcpu)
+static inline
+bool kvm_vcpu_trap_is_permission_fault(const struct kvm_vcpu *vcpu)
 {
-	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_TYPE;
+	return esr_fsc_is_permission_fault(kvm_vcpu_get_esr(vcpu));
 }
 
-static __always_inline u8 kvm_vcpu_trap_get_fault_level(const struct kvm_vcpu *vcpu)
+static inline
+bool kvm_vcpu_trap_is_translation_fault(const struct kvm_vcpu *vcpu)
 {
-	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_LEVEL;
+	return esr_fsc_is_translation_fault(kvm_vcpu_get_esr(vcpu));
+}
+
+static inline
+u64 kvm_vcpu_trap_get_perm_fault_granule(const struct kvm_vcpu *vcpu)
+{
+	unsigned long esr = kvm_vcpu_get_esr(vcpu);
+
+	BUG_ON(!esr_fsc_is_permission_fault(esr));
+	return BIT(ARM64_HW_PGTABLE_LEVEL_SHIFT(esr & ESR_ELx_FSC_LEVEL));
 }
 
 static __always_inline bool kvm_vcpu_abt_issea(const struct kvm_vcpu *vcpu)
@@ -454,12 +461,7 @@ static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
 		 * first), then a permission fault to allow the flags
 		 * to be set.
 		 */
-		switch (kvm_vcpu_trap_get_fault_type(vcpu)) {
-		case ESR_ELx_FSC_PERM:
-			return true;
-		default:
-			return false;
-		}
+		return kvm_vcpu_trap_is_permission_fault(vcpu);
 	}
 
 	if (kvm_vcpu_trap_is_iabt(vcpu))
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_host.h linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_host.h
index 824f29f04916..21c57b812569 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_host.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_host.h
@@ -27,6 +27,7 @@
 #include <asm/fpsimd.h>
 #include <asm/kvm.h>
 #include <asm/kvm_asm.h>
+#include <asm/vncr_mapping.h>
 
 #define __KVM_HAVE_ARCH_INTC_INITIALIZED
 
@@ -306,6 +307,7 @@ struct kvm_arch {
 	 * Atomic access to multiple idregs are guarded by kvm_arch.config_lock.
 	 */
 #define IDREG_IDX(id)		(((sys_reg_CRm(id) - 1) << 3) | sys_reg_Op2(id))
+#define IDX_IDREG(idx)		sys_reg(3, 0, 0, ((idx) >> 3) + 1, (idx) & Op2_mask)
 #define IDREG(kvm, id)		((kvm)->arch.id_regs[IDREG_IDX(id)])
 #define KVM_ARM_ID_REG_NUM	(IDREG_IDX(sys_reg(3, 0, 0, 7, 7)) + 1)
 	u64 id_regs[KVM_ARM_ID_REG_NUM];
@@ -324,33 +326,33 @@ struct kvm_vcpu_fault_info {
 	u64 disr_el1;		/* Deferred [SError] Status Register */
 };
 
+/*
+ * VNCR() just places the VNCR_capable registers in the enum after
+ * __VNCR_START__, and the value (after correction) to be an 8-byte offset
+ * from the VNCR base. As we don't require the enum to be otherwise ordered,
+ * we need the terrible hack below to ensure that we correctly size the
+ * sys_regs array, no matter what.
+ *
+ * The __MAX__ macro has been lifted from Sean Eron Anderson's wonderful
+ * treasure trove of bit hacks:
+ * https://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
+ */
+#define __MAX__(x,y)	((x) ^ (((x) ^ (y)) & -((x) < (y))))
+#define VNCR(r)						\
+	__before_##r,					\
+	r = __VNCR_START__ + ((VNCR_ ## r) / 8),	\
+	__after_##r = __MAX__(__before_##r - 1, r)
+
 enum vcpu_sysreg {
 	__INVALID_SYSREG__,   /* 0 is reserved as an invalid value */
 	MPIDR_EL1,	/* MultiProcessor Affinity Register */
 	CLIDR_EL1,	/* Cache Level ID Register */
 	CSSELR_EL1,	/* Cache Size Selection Register */
-	SCTLR_EL1,	/* System Control Register */
-	ACTLR_EL1,	/* Auxiliary Control Register */
-	CPACR_EL1,	/* Coprocessor Access Control */
-	ZCR_EL1,	/* SVE Control */
-	TTBR0_EL1,	/* Translation Table Base Register 0 */
-	TTBR1_EL1,	/* Translation Table Base Register 1 */
-	TCR_EL1,	/* Translation Control Register */
-	TCR2_EL1,	/* Extended Translation Control Register */
-	ESR_EL1,	/* Exception Syndrome Register */
-	AFSR0_EL1,	/* Auxiliary Fault Status Register 0 */
-	AFSR1_EL1,	/* Auxiliary Fault Status Register 1 */
-	FAR_EL1,	/* Fault Address Register */
-	MAIR_EL1,	/* Memory Attribute Indirection Register */
-	VBAR_EL1,	/* Vector Base Address Register */
-	CONTEXTIDR_EL1,	/* Context ID Register */
 	TPIDR_EL0,	/* Thread ID, User R/W */
 	TPIDRRO_EL0,	/* Thread ID, User R/O */
 	TPIDR_EL1,	/* Thread ID, Privileged */
-	AMAIR_EL1,	/* Aux Memory Attribute Indirection Register */
 	CNTKCTL_EL1,	/* Timer Control Register (EL1) */
 	PAR_EL1,	/* Physical Address Register */
-	MDSCR_EL1,	/* Monitor Debug System Control Register */
 	MDCCINT_EL1,	/* Monitor Debug Comms Channel Interrupt Enable Reg */
 	OSLSR_EL1,	/* OS Lock Status Register */
 	DISR_EL1,	/* Deferred Interrupt Status Register */
@@ -381,26 +383,11 @@ enum vcpu_sysreg {
 	APGAKEYLO_EL1,
 	APGAKEYHI_EL1,
 
-	ELR_EL1,
-	SP_EL1,
-	SPSR_EL1,
-
-	CNTVOFF_EL2,
-	CNTV_CVAL_EL0,
-	CNTV_CTL_EL0,
-	CNTP_CVAL_EL0,
-	CNTP_CTL_EL0,
-
 	/* Memory Tagging Extension registers */
 	RGSR_EL1,	/* Random Allocation Tag Seed Register */
 	GCR_EL1,	/* Tag Control Register */
-	TFSR_EL1,	/* Tag Fault Status Register (EL1) */
 	TFSRE0_EL1,	/* Tag Fault Status Register (EL0) */
 
-	/* Permission Indirection Extension registers */
-	PIR_EL1,       /* Permission Indirection Register 1 (EL1) */
-	PIRE0_EL1,     /*  Permission Indirection Register 0 (EL1) */
-
 	/* 32bit specific registers. */
 	DACR32_EL2,	/* Domain Access Control Register */
 	IFSR32_EL2,	/* Instruction Fault Status Register */
@@ -408,21 +395,14 @@ enum vcpu_sysreg {
 	DBGVCR32_EL2,	/* Debug Vector Catch Register */
 
 	/* EL2 registers */
-	VPIDR_EL2,	/* Virtualization Processor ID Register */
-	VMPIDR_EL2,	/* Virtualization Multiprocessor ID Register */
 	SCTLR_EL2,	/* System Control Register (EL2) */
 	ACTLR_EL2,	/* Auxiliary Control Register (EL2) */
-	HCR_EL2,	/* Hypervisor Configuration Register */
 	MDCR_EL2,	/* Monitor Debug Configuration Register (EL2) */
 	CPTR_EL2,	/* Architectural Feature Trap Register (EL2) */
-	HSTR_EL2,	/* Hypervisor System Trap Register */
 	HACR_EL2,	/* Hypervisor Auxiliary Control Register */
-	HCRX_EL2,	/* Extended Hypervisor Configuration Register */
 	TTBR0_EL2,	/* Translation Table Base Register 0 (EL2) */
 	TTBR1_EL2,	/* Translation Table Base Register 1 (EL2) */
 	TCR_EL2,	/* Translation Control Register (EL2) */
-	VTTBR_EL2,	/* Virtualization Translation Table Base Register */
-	VTCR_EL2,	/* Virtualization Translation Control Register */
 	SPSR_EL2,	/* EL2 saved program status register */
 	ELR_EL2,	/* EL2 exception link register */
 	AFSR0_EL2,	/* Auxiliary Fault Status Register 0 (EL2) */
@@ -435,19 +415,62 @@ enum vcpu_sysreg {
 	VBAR_EL2,	/* Vector Base Address Register (EL2) */
 	RVBAR_EL2,	/* Reset Vector Base Address Register */
 	CONTEXTIDR_EL2,	/* Context ID Register (EL2) */
-	TPIDR_EL2,	/* EL2 Software Thread ID Register */
 	CNTHCTL_EL2,	/* Counter-timer Hypervisor Control register */
 	SP_EL2,		/* EL2 Stack Pointer */
-	HFGRTR_EL2,
-	HFGWTR_EL2,
-	HFGITR_EL2,
-	HDFGRTR_EL2,
-	HDFGWTR_EL2,
 	CNTHP_CTL_EL2,
 	CNTHP_CVAL_EL2,
 	CNTHV_CTL_EL2,
 	CNTHV_CVAL_EL2,
 
+	__VNCR_START__,	/* Any VNCR-capable reg goes after this point */
+
+	VNCR(SCTLR_EL1),/* System Control Register */
+	VNCR(ACTLR_EL1),/* Auxiliary Control Register */
+	VNCR(CPACR_EL1),/* Coprocessor Access Control */
+	VNCR(ZCR_EL1),	/* SVE Control */
+	VNCR(TTBR0_EL1),/* Translation Table Base Register 0 */
+	VNCR(TTBR1_EL1),/* Translation Table Base Register 1 */
+	VNCR(TCR_EL1),	/* Translation Control Register */
+	VNCR(TCR2_EL1),	/* Extended Translation Control Register */
+	VNCR(ESR_EL1),	/* Exception Syndrome Register */
+	VNCR(AFSR0_EL1),/* Auxiliary Fault Status Register 0 */
+	VNCR(AFSR1_EL1),/* Auxiliary Fault Status Register 1 */
+	VNCR(FAR_EL1),	/* Fault Address Register */
+	VNCR(MAIR_EL1),	/* Memory Attribute Indirection Register */
+	VNCR(VBAR_EL1),	/* Vector Base Address Register */
+	VNCR(CONTEXTIDR_EL1),	/* Context ID Register */
+	VNCR(AMAIR_EL1),/* Aux Memory Attribute Indirection Register */
+	VNCR(MDSCR_EL1),/* Monitor Debug System Control Register */
+	VNCR(ELR_EL1),
+	VNCR(SP_EL1),
+	VNCR(SPSR_EL1),
+	VNCR(TFSR_EL1),	/* Tag Fault Status Register (EL1) */
+	VNCR(VPIDR_EL2),/* Virtualization Processor ID Register */
+	VNCR(VMPIDR_EL2),/* Virtualization Multiprocessor ID Register */
+	VNCR(HCR_EL2),	/* Hypervisor Configuration Register */
+	VNCR(HSTR_EL2),	/* Hypervisor System Trap Register */
+	VNCR(VTTBR_EL2),/* Virtualization Translation Table Base Register */
+	VNCR(VTCR_EL2),	/* Virtualization Translation Control Register */
+	VNCR(TPIDR_EL2),/* EL2 Software Thread ID Register */
+	VNCR(HCRX_EL2),	/* Extended Hypervisor Configuration Register */
+
+	/* Permission Indirection Extension registers */
+	VNCR(PIR_EL1),	 /* Permission Indirection Register 1 (EL1) */
+	VNCR(PIRE0_EL1), /*  Permission Indirection Register 0 (EL1) */
+
+	VNCR(HFGRTR_EL2),
+	VNCR(HFGWTR_EL2),
+	VNCR(HFGITR_EL2),
+	VNCR(HDFGRTR_EL2),
+	VNCR(HDFGWTR_EL2),
+	VNCR(HAFGRTR_EL2),
+
+	VNCR(CNTVOFF_EL2),
+	VNCR(CNTV_CVAL_EL0),
+	VNCR(CNTV_CTL_EL0),
+	VNCR(CNTP_CVAL_EL0),
+	VNCR(CNTP_CTL_EL0),
+
 	NR_SYS_REGS	/* Nothing after this line! */
 };
 
@@ -464,6 +487,9 @@ struct kvm_cpu_context {
 	u64 sys_regs[NR_SYS_REGS];
 
 	struct kvm_vcpu *__hyp_running_vcpu;
+
+	/* This pointer has to be 4kB aligned. */
+	u64 *vncr_array;
 };
 
 struct kvm_host_data {
@@ -826,8 +852,19 @@ struct kvm_vcpu_arch {
  * accessed by a running VCPU.  For example, for userspace access or
  * for system registers that are never context switched, but only
  * emulated.
+ *
+ * Don't bother with VNCR-based accesses in the nVHE code, it has no
+ * business dealing with NV.
  */
-#define __ctxt_sys_reg(c,r)	(&(c)->sys_regs[(r)])
+static inline u64 *__ctxt_sys_reg(const struct kvm_cpu_context *ctxt, int r)
+{
+#if !defined (__KVM_NVHE_HYPERVISOR__)
+	if (unlikely(cpus_have_final_cap(ARM64_HAS_NESTED_VIRT) &&
+		     r >= __VNCR_START__ && ctxt->vncr_array))
+		return &ctxt->vncr_array[r - __VNCR_START__];
+#endif
+	return (u64 *)&ctxt->sys_regs[r];
+}
 
 #define ctxt_sys_reg(c,r)	(*__ctxt_sys_reg(c,r))
 
@@ -871,6 +908,7 @@ static inline bool __vcpu_read_sys_reg_from_cpu(int reg, u64 *val)
 	case AMAIR_EL1:		*val = read_sysreg_s(SYS_AMAIR_EL12);	break;
 	case CNTKCTL_EL1:	*val = read_sysreg_s(SYS_CNTKCTL_EL12);	break;
 	case ELR_EL1:		*val = read_sysreg_s(SYS_ELR_EL12);	break;
+	case SPSR_EL1:		*val = read_sysreg_s(SYS_SPSR_EL12);	break;
 	case PAR_EL1:		*val = read_sysreg_par();		break;
 	case DACR32_EL2:	*val = read_sysreg_s(SYS_DACR32_EL2);	break;
 	case IFSR32_EL2:	*val = read_sysreg_s(SYS_IFSR32_EL2);	break;
@@ -915,6 +953,7 @@ static inline bool __vcpu_write_sys_reg_to_cpu(u64 val, int reg)
 	case AMAIR_EL1:		write_sysreg_s(val, SYS_AMAIR_EL12);	break;
 	case CNTKCTL_EL1:	write_sysreg_s(val, SYS_CNTKCTL_EL12);	break;
 	case ELR_EL1:		write_sysreg_s(val, SYS_ELR_EL12);	break;
+	case SPSR_EL1:		write_sysreg_s(val, SYS_SPSR_EL12);	break;
 	case PAR_EL1:		write_sysreg_s(val, SYS_PAR_EL1);	break;
 	case DACR32_EL2:	write_sysreg_s(val, SYS_DACR32_EL2);	break;
 	case IFSR32_EL2:	write_sysreg_s(val, SYS_IFSR32_EL2);	break;
@@ -954,8 +993,6 @@ int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu,
 int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
 			      struct kvm_vcpu_events *events);
 
-#define KVM_ARCH_WANT_MMU_NOTIFIER
-
 void kvm_arm_halt_guest(struct kvm *kvm);
 void kvm_arm_resume_guest(struct kvm *kvm);
 
@@ -1177,6 +1214,13 @@ bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu);
 #define kvm_vm_has_ran_once(kvm)					\
 	(test_bit(KVM_ARCH_FLAG_HAS_RAN_ONCE, &(kvm)->arch.flags))
 
+static inline bool __vcpu_has_feature(const struct kvm_arch *ka, int feature)
+{
+	return test_bit(feature, ka->vcpu_features);
+}
+
+#define vcpu_has_feature(v, f)	__vcpu_has_feature(&(v)->kvm->arch, (f))
+
 int kvm_trng_call(struct kvm_vcpu *vcpu);
 #ifdef CONFIG_KVM
 extern phys_addr_t hyp_mem_base;
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_mmu.h linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_mmu.h
index 49e0d4b36bd0..e3e793d0ec30 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_mmu.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_mmu.h
@@ -243,13 +243,6 @@ static inline size_t __invalidate_icache_max_range(void)
 
 static inline void __invalidate_icache_guest_page(void *va, size_t size)
 {
-	/*
-	 * VPIPT I-cache maintenance must be done from EL2. See comment in the
-	 * nVHE flavor of __kvm_tlb_flush_vmid_ipa().
-	 */
-	if (icache_is_vpipt() && read_sysreg(CurrentEL) != CurrentEL_EL2)
-		return;
-
 	/*
 	 * Blow the whole I-cache if it is aliasing (i.e. VIPT) or the
 	 * invalidation range exceeds our arbitrary limit on invadations by
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_nested.h linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_nested.h
index 6cec8e9c6c91..4882905357f4 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_nested.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_nested.h
@@ -2,8 +2,9 @@
 #ifndef __ARM64_KVM_NESTED_H
 #define __ARM64_KVM_NESTED_H
 
-#include <asm/kvm_emulate.h>
+#include <linux/bitfield.h>
 #include <linux/kvm_host.h>
+#include <asm/kvm_emulate.h>
 
 static inline bool vcpu_has_nv(const struct kvm_vcpu *vcpu)
 {
@@ -12,12 +13,55 @@ static inline bool vcpu_has_nv(const struct kvm_vcpu *vcpu)
 		vcpu_has_feature(vcpu, KVM_ARM_VCPU_HAS_EL2));
 }
 
-extern bool __check_nv_sr_forward(struct kvm_vcpu *vcpu);
+/* Translation helpers from non-VHE EL2 to EL1 */
+static inline u64 tcr_el2_ps_to_tcr_el1_ips(u64 tcr_el2)
+{
+	return (u64)FIELD_GET(TCR_EL2_PS_MASK, tcr_el2) << TCR_IPS_SHIFT;
+}
+
+static inline u64 translate_tcr_el2_to_tcr_el1(u64 tcr)
+{
+	return TCR_EPD1_MASK |				/* disable TTBR1_EL1 */
+	       ((tcr & TCR_EL2_TBI) ? TCR_TBI0 : 0) |
+	       tcr_el2_ps_to_tcr_el1_ips(tcr) |
+	       (tcr & TCR_EL2_TG0_MASK) |
+	       (tcr & TCR_EL2_ORGN0_MASK) |
+	       (tcr & TCR_EL2_IRGN0_MASK) |
+	       (tcr & TCR_EL2_T0SZ_MASK);
+}
+
+static inline u64 translate_cptr_el2_to_cpacr_el1(u64 cptr_el2)
+{
+	u64 cpacr_el1 = 0;
+
+	if (cptr_el2 & CPTR_EL2_TTA)
+		cpacr_el1 |= CPACR_ELx_TTA;
+	if (!(cptr_el2 & CPTR_EL2_TFP))
+		cpacr_el1 |= CPACR_ELx_FPEN;
+	if (!(cptr_el2 & CPTR_EL2_TZ))
+		cpacr_el1 |= CPACR_ELx_ZEN;
 
-struct sys_reg_params;
-struct sys_reg_desc;
+	return cpacr_el1;
+}
+
+static inline u64 translate_sctlr_el2_to_sctlr_el1(u64 val)
+{
+	/* Only preserve the minimal set of bits we support */
+	val &= (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | SCTLR_ELx_SA |
+		SCTLR_ELx_I | SCTLR_ELx_IESB | SCTLR_ELx_WXN | SCTLR_ELx_EE);
+	val |= SCTLR_EL1_RES1;
+
+	return val;
+}
+
+static inline u64 translate_ttbr0_el2_to_ttbr0_el1(u64 ttbr0)
+{
+	/* Clear the ASID field */
+	return ttbr0 & ~GENMASK_ULL(63, 48);
+}
+
+extern bool __check_nv_sr_forward(struct kvm_vcpu *vcpu);
 
-void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p,
-			  const struct sys_reg_desc *r);
+int kvm_init_nv_sysregs(struct kvm *kvm);
 
 #endif /* __ARM64_KVM_NESTED_H */
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_pgtable.h linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_pgtable.h
index d3e354bb8351..cfdf40f734b1 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_pgtable.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_pgtable.h
@@ -11,7 +11,8 @@
 #include <linux/kvm_host.h>
 #include <linux/types.h>
 
-#define KVM_PGTABLE_MAX_LEVELS		4U
+#define KVM_PGTABLE_FIRST_LEVEL		-1
+#define KVM_PGTABLE_LAST_LEVEL		3
 
 /*
  * The largest supported block sizes for KVM (no 52-bit PA support):
@@ -20,17 +21,29 @@
  *  - 64K (level 2):	512MB
  */
 #ifdef CONFIG_ARM64_4K_PAGES
-#define KVM_PGTABLE_MIN_BLOCK_LEVEL	1U
+#define KVM_PGTABLE_MIN_BLOCK_LEVEL	1
 #else
-#define KVM_PGTABLE_MIN_BLOCK_LEVEL	2U
+#define KVM_PGTABLE_MIN_BLOCK_LEVEL	2
 #endif
 
+#define kvm_lpa2_is_enabled()		system_supports_lpa2()
+
+static inline u64 kvm_get_parange_max(void)
+{
+	if (kvm_lpa2_is_enabled() ||
+	   (IS_ENABLED(CONFIG_ARM64_PA_BITS_52) && PAGE_SHIFT == 16))
+		return ID_AA64MMFR0_EL1_PARANGE_52;
+	else
+		return ID_AA64MMFR0_EL1_PARANGE_48;
+}
+
 static inline u64 kvm_get_parange(u64 mmfr0)
 {
+	u64 parange_max = kvm_get_parange_max();
 	u64 parange = cpuid_feature_extract_unsigned_field(mmfr0,
 				ID_AA64MMFR0_EL1_PARANGE_SHIFT);
-	if (parange > ID_AA64MMFR0_EL1_PARANGE_MAX)
-		parange = ID_AA64MMFR0_EL1_PARANGE_MAX;
+	if (parange > parange_max)
+		parange = parange_max;
 
 	return parange;
 }
@@ -41,6 +54,8 @@ typedef u64 kvm_pte_t;
 
 #define KVM_PTE_ADDR_MASK		GENMASK(47, PAGE_SHIFT)
 #define KVM_PTE_ADDR_51_48		GENMASK(15, 12)
+#define KVM_PTE_ADDR_MASK_LPA2		GENMASK(49, PAGE_SHIFT)
+#define KVM_PTE_ADDR_51_50_LPA2		GENMASK(9, 8)
 
 #define KVM_PHYS_INVALID		(-1ULL)
 
@@ -51,21 +66,34 @@ static inline bool kvm_pte_valid(kvm_pte_t pte)
 
 static inline u64 kvm_pte_to_phys(kvm_pte_t pte)
 {
-	u64 pa = pte & KVM_PTE_ADDR_MASK;
-
-	if (PAGE_SHIFT == 16)
-		pa |= FIELD_GET(KVM_PTE_ADDR_51_48, pte) << 48;
+	u64 pa;
+
+	if (kvm_lpa2_is_enabled()) {
+		pa = pte & KVM_PTE_ADDR_MASK_LPA2;
+		pa |= FIELD_GET(KVM_PTE_ADDR_51_50_LPA2, pte) << 50;
+	} else {
+		pa = pte & KVM_PTE_ADDR_MASK;
+		if (PAGE_SHIFT == 16)
+			pa |= FIELD_GET(KVM_PTE_ADDR_51_48, pte) << 48;
+	}
 
 	return pa;
 }
 
 static inline kvm_pte_t kvm_phys_to_pte(u64 pa)
 {
-	kvm_pte_t pte = pa & KVM_PTE_ADDR_MASK;
-
-	if (PAGE_SHIFT == 16) {
-		pa &= GENMASK(51, 48);
-		pte |= FIELD_PREP(KVM_PTE_ADDR_51_48, pa >> 48);
+	kvm_pte_t pte;
+
+	if (kvm_lpa2_is_enabled()) {
+		pte = pa & KVM_PTE_ADDR_MASK_LPA2;
+		pa &= GENMASK(51, 50);
+		pte |= FIELD_PREP(KVM_PTE_ADDR_51_50_LPA2, pa >> 50);
+	} else {
+		pte = pa & KVM_PTE_ADDR_MASK;
+		if (PAGE_SHIFT == 16) {
+			pa &= GENMASK(51, 48);
+			pte |= FIELD_PREP(KVM_PTE_ADDR_51_48, pa >> 48);
+		}
 	}
 
 	return pte;
@@ -76,28 +104,28 @@ static inline kvm_pfn_t kvm_pte_to_pfn(kvm_pte_t pte)
 	return __phys_to_pfn(kvm_pte_to_phys(pte));
 }
 
-static inline u64 kvm_granule_shift(u32 level)
+static inline u64 kvm_granule_shift(s8 level)
 {
-	/* Assumes KVM_PGTABLE_MAX_LEVELS is 4 */
+	/* Assumes KVM_PGTABLE_LAST_LEVEL is 3 */
 	return ARM64_HW_PGTABLE_LEVEL_SHIFT(level);
 }
 
-static inline u64 kvm_granule_size(u32 level)
+static inline u64 kvm_granule_size(s8 level)
 {
 	return BIT(kvm_granule_shift(level));
 }
 
-static inline bool kvm_level_supports_block_mapping(u32 level)
+static inline bool kvm_level_supports_block_mapping(s8 level)
 {
 	return level >= KVM_PGTABLE_MIN_BLOCK_LEVEL;
 }
 
 static inline u32 kvm_supported_block_sizes(void)
 {
-	u32 level = KVM_PGTABLE_MIN_BLOCK_LEVEL;
+	s8 level = KVM_PGTABLE_MIN_BLOCK_LEVEL;
 	u32 r = 0;
 
-	for (; level < KVM_PGTABLE_MAX_LEVELS; level++)
+	for (; level <= KVM_PGTABLE_LAST_LEVEL; level++)
 		r |= BIT(kvm_granule_shift(level));
 
 	return r;
@@ -142,7 +170,7 @@ struct kvm_pgtable_mm_ops {
 	void*		(*zalloc_page)(void *arg);
 	void*		(*zalloc_pages_exact)(size_t size);
 	void		(*free_pages_exact)(void *addr, size_t size);
-	void		(*free_unlinked_table)(void *addr, u32 level);
+	void		(*free_unlinked_table)(void *addr, s8 level);
 	void		(*get_page)(void *addr);
 	void		(*put_page)(void *addr);
 	int		(*page_count)(void *addr);
@@ -238,7 +266,7 @@ struct kvm_pgtable_visit_ctx {
 	u64					start;
 	u64					addr;
 	u64					end;
-	u32					level;
+	s8					level;
 	enum kvm_pgtable_walk_flags		flags;
 };
 
@@ -341,7 +369,7 @@ static inline bool kvm_pgtable_walk_lock_held(void)
  */
 struct kvm_pgtable {
 	u32					ia_bits;
-	u32					start_level;
+	s8					start_level;
 	kvm_pteref_t				pgd;
 	struct kvm_pgtable_mm_ops		*mm_ops;
 
@@ -475,7 +503,7 @@ void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt);
  * The page-table is assumed to be unreachable by any hardware walkers prior to
  * freeing and therefore no TLB invalidation is performed.
  */
-void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, u32 level);
+void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, s8 level);
 
 /**
  * kvm_pgtable_stage2_create_unlinked() - Create an unlinked stage-2 paging structure.
@@ -499,7 +527,7 @@ void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *p
  * an ERR_PTR(error) on failure.
  */
 kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
-					      u64 phys, u32 level,
+					      u64 phys, s8 level,
 					      enum kvm_pgtable_prot prot,
 					      void *mc, bool force_pte);
 
@@ -725,7 +753,7 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size,
  * Return: 0 on success, negative error code on failure.
  */
 int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr,
-			 kvm_pte_t *ptep, u32 *level);
+			 kvm_pte_t *ptep, s8 *level);
 
 /**
  * kvm_pgtable_stage2_pte_prot() - Retrieve the protection attributes of a
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_pkvm.h linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_pkvm.h
index e46250a02017..ad9cfb5c1ff4 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/kvm_pkvm.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/kvm_pkvm.h
@@ -56,10 +56,11 @@ static inline unsigned long hyp_vm_table_pages(void)
 
 static inline unsigned long __hyp_pgtable_max_pages(unsigned long nr_pages)
 {
-	unsigned long total = 0, i;
+	unsigned long total = 0;
+	int i;
 
 	/* Provision the worst case scenario */
-	for (i = 0; i < KVM_PGTABLE_MAX_LEVELS; i++) {
+	for (i = KVM_PGTABLE_FIRST_LEVEL; i <= KVM_PGTABLE_LAST_LEVEL; i++) {
 		nr_pages = DIV_ROUND_UP(nr_pages, PTRS_PER_PTE);
 		total += nr_pages;
 	}
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/memory.h linux-libre-6.8-gnu/arch/arm64/include/asm/memory.h
index fde4186cc387..d82305ab420f 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/memory.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/memory.h
@@ -65,15 +65,41 @@
 #define KERNEL_END		_end
 
 /*
- * Generic and tag-based KASAN require 1/8th and 1/16th of the kernel virtual
- * address space for the shadow region respectively. They can bloat the stack
- * significantly, so double the (minimum) stack size when they are in use.
+ * Generic and Software Tag-Based KASAN modes require 1/8th and 1/16th of the
+ * kernel virtual address space for storing the shadow memory respectively.
+ *
+ * The mapping between a virtual memory address and its corresponding shadow
+ * memory address is defined based on the formula:
+ *
+ *     shadow_addr = (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET
+ *
+ * where KASAN_SHADOW_SCALE_SHIFT is the order of the number of bits that map
+ * to a single shadow byte and KASAN_SHADOW_OFFSET is a constant that offsets
+ * the mapping. Note that KASAN_SHADOW_OFFSET does not point to the start of
+ * the shadow memory region.
+ *
+ * Based on this mapping, we define two constants:
+ *
+ *     KASAN_SHADOW_START: the start of the shadow memory region;
+ *     KASAN_SHADOW_END: the end of the shadow memory region.
+ *
+ * KASAN_SHADOW_END is defined first as the shadow address that corresponds to
+ * the upper bound of possible virtual kernel memory addresses UL(1) << 64
+ * according to the mapping formula.
+ *
+ * KASAN_SHADOW_START is defined second based on KASAN_SHADOW_END. The shadow
+ * memory start must map to the lowest possible kernel virtual memory address
+ * and thus it depends on the actual bitness of the address space.
+ *
+ * As KASAN inserts redzones between stack variables, this increases the stack
+ * memory usage significantly. Thus, we double the (minimum) stack size.
  */
 #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
 #define KASAN_SHADOW_OFFSET	_AC(CONFIG_KASAN_SHADOW_OFFSET, UL)
-#define KASAN_SHADOW_END	((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \
-					+ KASAN_SHADOW_OFFSET)
-#define PAGE_END		(KASAN_SHADOW_END - (1UL << (vabits_actual - KASAN_SHADOW_SCALE_SHIFT)))
+#define KASAN_SHADOW_END	((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) + KASAN_SHADOW_OFFSET)
+#define _KASAN_SHADOW_START(va)	(KASAN_SHADOW_END - (UL(1) << ((va) - KASAN_SHADOW_SCALE_SHIFT)))
+#define KASAN_SHADOW_START	_KASAN_SHADOW_START(vabits_actual)
+#define PAGE_END		KASAN_SHADOW_START
 #define KASAN_THREAD_SHIFT	1
 #else
 #define KASAN_THREAD_SHIFT	0
@@ -182,6 +208,7 @@
 #include <linux/types.h>
 #include <asm/boot.h>
 #include <asm/bug.h>
+#include <asm/sections.h>
 
 #if VA_BITS > 48
 extern u64			vabits_actual;
@@ -193,15 +220,12 @@ extern s64			memstart_addr;
 /* PHYS_OFFSET - the physical address of the start of memory. */
 #define PHYS_OFFSET		({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
 
-/* the virtual base of the kernel image */
-extern u64			kimage_vaddr;
-
 /* the offset between the kernel virtual and physical mappings */
 extern u64			kimage_voffset;
 
 static inline unsigned long kaslr_offset(void)
 {
-	return kimage_vaddr - KIMAGE_VADDR;
+	return (u64)&_text - KIMAGE_VADDR;
 }
 
 #ifdef CONFIG_RANDOMIZE_BASE
@@ -407,6 +431,5 @@ void dump_mem_limit(void);
 #define INIT_MEMBLOCK_MEMORY_REGIONS	(INIT_MEMBLOCK_REGIONS * 8)
 #endif
 
-#include <asm-generic/memory_model.h>
 
 #endif /* __ASM_MEMORY_H */
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/pgtable-prot.h linux-libre-6.8-gnu/arch/arm64/include/asm/pgtable-prot.h
index e9624f6326dd..483dbfa39c4c 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/pgtable-prot.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/pgtable-prot.h
@@ -71,6 +71,8 @@ extern bool arm64_use_ng_mappings;
 #define PTE_MAYBE_NG		(arm64_use_ng_mappings ? PTE_NG : 0)
 #define PMD_MAYBE_NG		(arm64_use_ng_mappings ? PMD_SECT_NG : 0)
 
+#define lpa2_is_enabled()	false
+
 /*
  * If we have userspace only BTI we don't want to mark kernel pages
  * guarded even if the system does support BTI.
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/processor.h linux-libre-6.8-gnu/arch/arm64/include/asm/processor.h
index e5bc54522e71..5b0a04810b23 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/processor.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/processor.h
@@ -167,6 +167,9 @@ struct thread_struct {
 	unsigned long		fault_address;	/* fault info */
 	unsigned long		fault_code;	/* ESR_EL1 value */
 	struct debug_info	debug;		/* debugging */
+
+	struct user_fpsimd_state	kernel_fpsimd_state;
+	unsigned int			kernel_fpsimd_cpu;
 #ifdef CONFIG_ARM64_PTR_AUTH
 	struct ptrauth_keys_user	keys_user;
 #ifdef CONFIG_ARM64_PTR_AUTH_KERNEL
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/simd.h linux-libre-6.8-gnu/arch/arm64/include/asm/simd.h
index 6a75d7ecdcaa..8e86c9e70e48 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/simd.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/simd.h
@@ -12,8 +12,6 @@
 #include <linux/preempt.h>
 #include <linux/types.h>
 
-DECLARE_PER_CPU(bool, fpsimd_context_busy);
-
 #ifdef CONFIG_KERNEL_MODE_NEON
 
 /*
@@ -28,17 +26,10 @@ static __must_check inline bool may_use_simd(void)
 	/*
 	 * We must make sure that the SVE has been initialized properly
 	 * before using the SIMD in kernel.
-	 * fpsimd_context_busy is only set while preemption is disabled,
-	 * and is clear whenever preemption is enabled. Since
-	 * this_cpu_read() is atomic w.r.t. preemption, fpsimd_context_busy
-	 * cannot change under our feet -- if it's set we cannot be
-	 * migrated, and if it's clear we cannot be migrated to a CPU
-	 * where it is set.
 	 */
 	return !WARN_ON(!system_capabilities_finalized()) &&
 	       system_supports_fpsimd() &&
-	       !in_hardirq() && !irqs_disabled() && !in_nmi() &&
-	       !this_cpu_read(fpsimd_context_busy);
+	       !in_hardirq() && !irqs_disabled() && !in_nmi();
 }
 
 #else /* ! CONFIG_KERNEL_MODE_NEON */
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/sparsemem.h linux-libre-6.8-gnu/arch/arm64/include/asm/sparsemem.h
index 5f5437621029..8a8acc220371 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/sparsemem.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/sparsemem.h
@@ -10,7 +10,7 @@
 /*
  * Section size must be at least 512MB for 64K base
  * page size config. Otherwise it will be less than
- * MAX_ORDER and the build process will fail.
+ * MAX_PAGE_ORDER and the build process will fail.
  */
 #ifdef CONFIG_ARM64_64K_PAGES
 #define SECTION_SIZE_BITS 29
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/spectre.h linux-libre-6.8-gnu/arch/arm64/include/asm/spectre.h
index 06c357d83b13..0c4d9045c31f 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/spectre.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/spectre.h
@@ -13,8 +13,8 @@
 #define __BP_HARDEN_HYP_VECS_SZ	((BP_HARDEN_EL2_SLOTS - 1) * SZ_2K)
 
 #ifndef __ASSEMBLY__
-
-#include <linux/percpu.h>
+#include <linux/smp.h>
+#include <asm/percpu.h>
 
 #include <asm/cpufeature.h>
 #include <asm/virt.h>
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/stacktrace/common.h linux-libre-6.8-gnu/arch/arm64/include/asm/stacktrace/common.h
index 508f734de46e..f63dc654e545 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/stacktrace/common.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/stacktrace/common.h
@@ -9,7 +9,6 @@
 #ifndef __ASM_STACKTRACE_COMMON_H
 #define __ASM_STACKTRACE_COMMON_H
 
-#include <linux/kprobes.h>
 #include <linux/types.h>
 
 struct stack_info {
@@ -23,12 +22,6 @@ struct stack_info {
  * @fp:          The fp value in the frame record (or the real fp)
  * @pc:          The lr value in the frame record (or the real lr)
  *
- * @kr_cur:      When KRETPROBES is selected, holds the kretprobe instance
- *               associated with the most recently encountered replacement lr
- *               value.
- *
- * @task:        The task being unwound.
- *
  * @stack:       The stack currently being unwound.
  * @stacks:      An array of stacks which can be unwound.
  * @nr_stacks:   The number of stacks in @stacks.
@@ -36,10 +29,6 @@ struct stack_info {
 struct unwind_state {
 	unsigned long fp;
 	unsigned long pc;
-#ifdef CONFIG_KRETPROBES
-	struct llist_node *kr_cur;
-#endif
-	struct task_struct *task;
 
 	struct stack_info stack;
 	struct stack_info *stacks;
@@ -66,14 +55,8 @@ static inline bool stackinfo_on_stack(const struct stack_info *info,
 	return true;
 }
 
-static inline void unwind_init_common(struct unwind_state *state,
-				      struct task_struct *task)
+static inline void unwind_init_common(struct unwind_state *state)
 {
-	state->task = task;
-#ifdef CONFIG_KRETPROBES
-	state->kr_cur = NULL;
-#endif
-
 	state->stack = stackinfo_get_unknown();
 }
 
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/stacktrace/nvhe.h linux-libre-6.8-gnu/arch/arm64/include/asm/stacktrace/nvhe.h
index 25ab83a315a7..44759281d0d4 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/stacktrace/nvhe.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/stacktrace/nvhe.h
@@ -31,7 +31,7 @@ static inline void kvm_nvhe_unwind_init(struct unwind_state *state,
 					unsigned long fp,
 					unsigned long pc)
 {
-	unwind_init_common(state, NULL);
+	unwind_init_common(state);
 
 	state->fp = fp;
 	state->pc = pc;
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/sysreg.h linux-libre-6.8-gnu/arch/arm64/include/asm/sysreg.h
index 5e65f51c10d2..c3b19b376c86 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/sysreg.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/sysreg.h
@@ -645,6 +645,7 @@
 #define OP_AT_S1E0W	sys_insn(AT_Op0, 0, AT_CRn, 8, 3)
 #define OP_AT_S1E1RP	sys_insn(AT_Op0, 0, AT_CRn, 9, 0)
 #define OP_AT_S1E1WP	sys_insn(AT_Op0, 0, AT_CRn, 9, 1)
+#define OP_AT_S1E1A	sys_insn(AT_Op0, 0, AT_CRn, 9, 2)
 #define OP_AT_S1E2R	sys_insn(AT_Op0, 4, AT_CRn, 8, 0)
 #define OP_AT_S1E2W	sys_insn(AT_Op0, 4, AT_CRn, 8, 1)
 #define OP_AT_S12E1R	sys_insn(AT_Op0, 4, AT_CRn, 8, 4)
@@ -781,10 +782,16 @@
 #define OP_TLBI_VMALLS12E1NXS		sys_insn(1, 4, 9, 7, 6)
 
 /* Misc instructions */
+#define OP_GCSPUSHX			sys_insn(1, 0, 7, 7, 4)
+#define OP_GCSPOPCX			sys_insn(1, 0, 7, 7, 5)
+#define OP_GCSPOPX			sys_insn(1, 0, 7, 7, 6)
+#define OP_GCSPUSHM			sys_insn(1, 3, 7, 7, 0)
+
 #define OP_BRB_IALL			sys_insn(1, 1, 7, 2, 4)
 #define OP_BRB_INJ			sys_insn(1, 1, 7, 2, 5)
 #define OP_CFP_RCTX			sys_insn(1, 3, 7, 3, 4)
 #define OP_DVP_RCTX			sys_insn(1, 3, 7, 3, 5)
+#define OP_COSP_RCTX			sys_insn(1, 3, 7, 3, 6)
 #define OP_CPP_RCTX			sys_insn(1, 3, 7, 3, 7)
 
 /* Common SCTLR_ELx flags. */
@@ -871,10 +878,12 @@
 
 /* id_aa64mmfr0 */
 #define ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN	0x0
+#define ID_AA64MMFR0_EL1_TGRAN4_LPA2		ID_AA64MMFR0_EL1_TGRAN4_52_BIT
 #define ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX	0x7
 #define ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MIN	0x0
 #define ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MAX	0x7
 #define ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN	0x1
+#define ID_AA64MMFR0_EL1_TGRAN16_LPA2		ID_AA64MMFR0_EL1_TGRAN16_52_BIT
 #define ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX	0xf
 
 #define ARM64_MIN_PARANGE_BITS		32
@@ -882,6 +891,7 @@
 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_DEFAULT	0x0
 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_NONE		0x1
 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MIN		0x2
+#define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_LPA2		0x3
 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MAX		0x7
 
 #ifdef CONFIG_ARM64_PA_BITS_52
@@ -892,11 +902,13 @@
 
 #if defined(CONFIG_ARM64_4K_PAGES)
 #define ID_AA64MMFR0_EL1_TGRAN_SHIFT		ID_AA64MMFR0_EL1_TGRAN4_SHIFT
+#define ID_AA64MMFR0_EL1_TGRAN_LPA2		ID_AA64MMFR0_EL1_TGRAN4_52_BIT
 #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN	ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN
 #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX	ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX
 #define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT		ID_AA64MMFR0_EL1_TGRAN4_2_SHIFT
 #elif defined(CONFIG_ARM64_16K_PAGES)
 #define ID_AA64MMFR0_EL1_TGRAN_SHIFT		ID_AA64MMFR0_EL1_TGRAN16_SHIFT
+#define ID_AA64MMFR0_EL1_TGRAN_LPA2		ID_AA64MMFR0_EL1_TGRAN16_52_BIT
 #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN	ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN
 #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX	ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX
 #define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT		ID_AA64MMFR0_EL1_TGRAN16_2_SHIFT
@@ -1039,6 +1051,19 @@
 
 #define PIRx_ELx_PERM(idx, perm)	((perm) << ((idx) * 4))
 
+/*
+ * Permission Overlay Extension (POE) permission encodings.
+ */
+#define POE_NONE	UL(0x0)
+#define POE_R		UL(0x1)
+#define POE_X		UL(0x2)
+#define POE_RX		UL(0x3)
+#define POE_W		UL(0x4)
+#define POE_RW		UL(0x5)
+#define POE_XW		UL(0x6)
+#define POE_RXW		UL(0x7)
+#define POE_MASK	UL(0xf)
+
 #define ARM64_FEATURE_FIELD_BITS	4
 
 /* Defined for compatibility only, do not add new users. */
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/thread_info.h linux-libre-6.8-gnu/arch/arm64/include/asm/thread_info.h
index 553d1bc559c6..e72a3bf9e563 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/thread_info.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/thread_info.h
@@ -80,6 +80,7 @@ void arch_setup_new_exec(void);
 #define TIF_TAGGED_ADDR		26	/* Allow tagged user addresses */
 #define TIF_SME			27	/* SME in use */
 #define TIF_SME_VL_INHERIT	28	/* Inherit SME vl_onexec across exec */
+#define TIF_KERNEL_FPSTATE	29	/* Task is in a kernel mode FPSIMD section */
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/tlb.h linux-libre-6.8-gnu/arch/arm64/include/asm/tlb.h
index 846c563689a8..0150deb332af 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/tlb.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/tlb.h
@@ -22,15 +22,15 @@ static void tlb_flush(struct mmu_gather *tlb);
 #include <asm-generic/tlb.h>
 
 /*
- * get the tlbi levels in arm64.  Default value is 0 if more than one
- * of cleared_* is set or neither is set.
- * Arm64 doesn't support p4ds now.
+ * get the tlbi levels in arm64.  Default value is TLBI_TTL_UNKNOWN if more than
+ * one of cleared_* is set or neither is set - this elides the level hinting to
+ * the hardware.
  */
 static inline int tlb_get_level(struct mmu_gather *tlb)
 {
 	/* The TTL field is only valid for the leaf entry. */
 	if (tlb->freed_tables)
-		return 0;
+		return TLBI_TTL_UNKNOWN;
 
 	if (tlb->cleared_ptes && !(tlb->cleared_pmds ||
 				   tlb->cleared_puds ||
@@ -47,7 +47,12 @@ static inline int tlb_get_level(struct mmu_gather *tlb)
 				   tlb->cleared_p4ds))
 		return 1;
 
-	return 0;
+	if (tlb->cleared_p4ds && !(tlb->cleared_ptes ||
+				   tlb->cleared_pmds ||
+				   tlb->cleared_puds))
+		return 0;
+
+	return TLBI_TTL_UNKNOWN;
 }
 
 static inline void tlb_flush(struct mmu_gather *tlb)
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/tlbflush.h linux-libre-6.8-gnu/arch/arm64/include/asm/tlbflush.h
index bb2c2833a987..1deb5d789c2e 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/tlbflush.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/tlbflush.h
@@ -94,19 +94,22 @@ static inline unsigned long get_trans_granule(void)
  * When ARMv8.4-TTL exists, TLBI operations take an additional hint for
  * the level at which the invalidation must take place. If the level is
  * wrong, no invalidation may take place. In the case where the level
- * cannot be easily determined, a 0 value for the level parameter will
- * perform a non-hinted invalidation.
+ * cannot be easily determined, the value TLBI_TTL_UNKNOWN will perform
+ * a non-hinted invalidation. Any provided level outside the hint range
+ * will also cause fall-back to non-hinted invalidation.
  *
  * For Stage-2 invalidation, use the level values provided to that effect
  * in asm/stage2_pgtable.h.
  */
 #define TLBI_TTL_MASK		GENMASK_ULL(47, 44)
 
+#define TLBI_TTL_UNKNOWN	INT_MAX
+
 #define __tlbi_level(op, addr, level) do {				\
 	u64 arg = addr;							\
 									\
 	if (alternative_has_cap_unlikely(ARM64_HAS_ARMv8_4_TTL) &&	\
-	    level) {							\
+	    level >= 0 && level <= 3) {					\
 		u64 ttl = level & 3;					\
 		ttl |= get_trans_granule() << 2;			\
 		arg &= ~TLBI_TTL_MASK;					\
@@ -122,28 +125,34 @@ static inline unsigned long get_trans_granule(void)
 } while (0)
 
 /*
- * This macro creates a properly formatted VA operand for the TLB RANGE.
- * The value bit assignments are:
+ * This macro creates a properly formatted VA operand for the TLB RANGE. The
+ * value bit assignments are:
  *
  * +----------+------+-------+-------+-------+----------------------+
  * |   ASID   |  TG  | SCALE |  NUM  |  TTL  |        BADDR         |
  * +-----------------+-------+-------+-------+----------------------+
  * |63      48|47  46|45   44|43   39|38   37|36                   0|
  *
- * The address range is determined by below formula:
- * [BADDR, BADDR + (NUM + 1) * 2^(5*SCALE + 1) * PAGESIZE)
+ * The address range is determined by below formula: [BADDR, BADDR + (NUM + 1) *
+ * 2^(5*SCALE + 1) * PAGESIZE)
+ *
+ * Note that the first argument, baddr, is pre-shifted; If LPA2 is in use, BADDR
+ * holds addr[52:16]. Else BADDR holds page number. See for example ARM DDI
+ * 0487J.a section C5.5.60 "TLBI VAE1IS, TLBI VAE1ISNXS, TLB Invalidate by VA,
+ * EL1, Inner Shareable".
  *
  */
-#define __TLBI_VADDR_RANGE(addr, asid, scale, num, ttl)		\
-	({							\
-		unsigned long __ta = (addr) >> PAGE_SHIFT;	\
-		__ta &= GENMASK_ULL(36, 0);			\
-		__ta |= (unsigned long)(ttl) << 37;		\
-		__ta |= (unsigned long)(num) << 39;		\
-		__ta |= (unsigned long)(scale) << 44;		\
-		__ta |= get_trans_granule() << 46;		\
-		__ta |= (unsigned long)(asid) << 48;		\
-		__ta;						\
+#define __TLBI_VADDR_RANGE(baddr, asid, scale, num, ttl)			\
+	({									\
+		unsigned long __ta = (baddr);					\
+		unsigned long __ttl = (ttl >= 1 && ttl <= 3) ? ttl : 0;		\
+		__ta &= GENMASK_ULL(36, 0);					\
+		__ta |= __ttl << 37;						\
+		__ta |= (unsigned long)(num) << 39;				\
+		__ta |= (unsigned long)(scale) << 44;				\
+		__ta |= get_trans_granule() << 46;				\
+		__ta |= (unsigned long)(asid) << 48;				\
+		__ta;								\
 	})
 
 /* These macros are used by the TLBI RANGE feature. */
@@ -216,12 +225,16 @@ static inline unsigned long get_trans_granule(void)
  *		CPUs, ensuring that any walk-cache entries associated with the
  *		translation are also invalidated.
  *
- *	__flush_tlb_range(vma, start, end, stride, last_level)
+ *	__flush_tlb_range(vma, start, end, stride, last_level, tlb_level)
  *		Invalidate the virtual-address range '[start, end)' on all
  *		CPUs for the user address space corresponding to 'vma->mm'.
  *		The invalidation operations are issued at a granularity
  *		determined by 'stride' and only affect any walk-cache entries
- *		if 'last_level' is equal to false.
+ *		if 'last_level' is equal to false. tlb_level is the level at
+ *		which the invalidation must take place. If the level is wrong,
+ *		no invalidation may take place. In the case where the level
+ *		cannot be easily determined, the value TLBI_TTL_UNKNOWN will
+ *		perform a non-hinted invalidation.
  *
  *
  *	Finally, take a look at asm/tlb.h to see how tlb_flush() is implemented
@@ -345,34 +358,44 @@ static inline void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
  * @tlb_level:	Translation Table level hint, if known
  * @tlbi_user:	If 'true', call an additional __tlbi_user()
  *              (typically for user ASIDs). 'flase' for IPA instructions
+ * @lpa2:	If 'true', the lpa2 scheme is used as set out below
  *
  * When the CPU does not support TLB range operations, flush the TLB
  * entries one by one at the granularity of 'stride'. If the TLB
  * range ops are supported, then:
  *
- * 1. If 'pages' is odd, flush the first page through non-range
- *    operations;
+ * 1. If FEAT_LPA2 is in use, the start address of a range operation must be
+ *    64KB aligned, so flush pages one by one until the alignment is reached
+ *    using the non-range operations. This step is skipped if LPA2 is not in
+ *    use.
+ *
+ * 2. The minimum range granularity is decided by 'scale', so multiple range
+ *    TLBI operations may be required. Start from scale = 3, flush the largest
+ *    possible number of pages ((num+1)*2^(5*scale+1)) that fit into the
+ *    requested range, then decrement scale and continue until one or zero pages
+ *    are left. We must start from highest scale to ensure 64KB start alignment
+ *    is maintained in the LPA2 case.
  *
- * 2. For remaining pages: the minimum range granularity is decided
- *    by 'scale', so multiple range TLBI operations may be required.
- *    Start from scale = 0, flush the corresponding number of pages
- *    ((num+1)*2^(5*scale+1) starting from 'addr'), then increase it
- *    until no pages left.
+ * 3. If there is 1 page remaining, flush it through non-range operations. Range
+ *    operations can only span an even number of pages. We save this for last to
+ *    ensure 64KB start alignment is maintained for the LPA2 case.
  *
  * Note that certain ranges can be represented by either num = 31 and
  * scale or num = 0 and scale + 1. The loop below favours the latter
  * since num is limited to 30 by the __TLBI_RANGE_NUM() macro.
  */
 #define __flush_tlb_range_op(op, start, pages, stride,			\
-				asid, tlb_level, tlbi_user)		\
+				asid, tlb_level, tlbi_user, lpa2)	\
 do {									\
 	int num = 0;							\
-	int scale = 0;							\
+	int scale = 3;							\
+	int shift = lpa2 ? 16 : PAGE_SHIFT;				\
 	unsigned long addr;						\
 									\
 	while (pages > 0) {						\
 		if (!system_supports_tlb_range() ||			\
-		    pages % 2 == 1) {					\
+		    pages == 1 ||					\
+		    (lpa2 && start != ALIGN(start, SZ_64K))) {		\
 			addr = __TLBI_VADDR(start, asid);		\
 			__tlbi_level(op, addr, tlb_level);		\
 			if (tlbi_user)					\
@@ -384,20 +407,20 @@ do {									\
 									\
 		num = __TLBI_RANGE_NUM(pages, scale);			\
 		if (num >= 0) {						\
-			addr = __TLBI_VADDR_RANGE(start, asid, scale,	\
-						  num, tlb_level);	\
+			addr = __TLBI_VADDR_RANGE(start >> shift, asid, \
+						scale, num, tlb_level);	\
 			__tlbi(r##op, addr);				\
 			if (tlbi_user)					\
 				__tlbi_user(r##op, addr);		\
 			start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; \
 			pages -= __TLBI_RANGE_PAGES(num, scale);	\
 		}							\
-		scale++;						\
+		scale--;						\
 	}								\
 } while (0)
 
 #define __flush_s2_tlb_range_op(op, start, pages, stride, tlb_level) \
-	__flush_tlb_range_op(op, start, pages, stride, 0, tlb_level, false)
+	__flush_tlb_range_op(op, start, pages, stride, 0, tlb_level, false, kvm_lpa2_is_enabled());
 
 static inline void __flush_tlb_range(struct vm_area_struct *vma,
 				     unsigned long start, unsigned long end,
@@ -427,9 +450,11 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma,
 	asid = ASID(vma->vm_mm);
 
 	if (last_level)
-		__flush_tlb_range_op(vale1is, start, pages, stride, asid, tlb_level, true);
+		__flush_tlb_range_op(vale1is, start, pages, stride, asid,
+				     tlb_level, true, lpa2_is_enabled());
 	else
-		__flush_tlb_range_op(vae1is, start, pages, stride, asid, tlb_level, true);
+		__flush_tlb_range_op(vae1is, start, pages, stride, asid,
+				     tlb_level, true, lpa2_is_enabled());
 
 	dsb(ish);
 	mmu_notifier_arch_invalidate_secondary_tlbs(vma->vm_mm, start, end);
@@ -441,9 +466,10 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
 	/*
 	 * We cannot use leaf-only invalidation here, since we may be invalidating
 	 * table entries as part of collapsing hugepages or moving page tables.
-	 * Set the tlb_level to 0 because we can not get enough information here.
+	 * Set the tlb_level to TLBI_TTL_UNKNOWN because we can not get enough
+	 * information here.
 	 */
-	__flush_tlb_range(vma, start, end, PAGE_SIZE, false, 0);
+	__flush_tlb_range(vma, start, end, PAGE_SIZE, false, TLBI_TTL_UNKNOWN);
 }
 
 static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/topology.h linux-libre-6.8-gnu/arch/arm64/include/asm/topology.h
index 9fab663dd2de..a323b109b9c4 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/topology.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/topology.h
@@ -23,6 +23,7 @@ void update_freq_counters_refs(void);
 #define arch_set_freq_scale topology_set_freq_scale
 #define arch_scale_freq_capacity topology_get_freq_scale
 #define arch_scale_freq_invariant topology_scale_freq_invariant
+#define arch_scale_freq_ref topology_get_freq_ref
 
 #ifdef CONFIG_ACPI_CPPC_LIB
 #define arch_init_invariance_cppc topology_init_cpu_capacity_cppc
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/unistd.h linux-libre-6.8-gnu/arch/arm64/include/asm/unistd.h
index 531effca5f1f..491b2b9bd553 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/unistd.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/unistd.h
@@ -39,7 +39,7 @@
 #define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE + 5)
 #define __ARM_NR_COMPAT_END		(__ARM_NR_COMPAT_BASE + 0x800)
 
-#define __NR_compat_syscalls		457
+#define __NR_compat_syscalls		462
 #endif
 
 #define __ARCH_WANT_SYS_CLONE
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/unistd32.h linux-libre-6.8-gnu/arch/arm64/include/asm/unistd32.h
index 9f7c1bf99526..7118282d1c79 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/unistd32.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/unistd32.h
@@ -919,6 +919,16 @@ __SYSCALL(__NR_futex_wake, sys_futex_wake)
 __SYSCALL(__NR_futex_wait, sys_futex_wait)
 #define __NR_futex_requeue 456
 __SYSCALL(__NR_futex_requeue, sys_futex_requeue)
+#define __NR_statmount 457
+__SYSCALL(__NR_statmount, sys_statmount)
+#define __NR_listmount 458
+__SYSCALL(__NR_listmount, sys_listmount)
+#define __NR_lsm_get_self_attr 459
+__SYSCALL(__NR_lsm_get_self_attr, sys_lsm_get_self_attr)
+#define __NR_lsm_set_self_attr 460
+__SYSCALL(__NR_lsm_set_self_attr, sys_lsm_set_self_attr)
+#define __NR_lsm_list_modules 461
+__SYSCALL(__NR_lsm_list_modules, sys_lsm_list_modules)
 
 /*
  * Please add new compat syscalls above this comment and update
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/vdso.h linux-libre-6.8-gnu/arch/arm64/include/asm/vdso.h
index b4ae32109932..4305995c8f82 100644
--- linux-libre-6.7-gnu/arch/arm64/include/asm/vdso.h
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/vdso.h
@@ -17,9 +17,6 @@
 #ifndef __ASSEMBLY__
 
 #include <generated/vdso-offsets.h>
-#ifdef CONFIG_COMPAT_VDSO
-#include <generated/vdso32-offsets.h>
-#endif
 
 #define VDSO_SYMBOL(base, name)						   \
 ({									   \
diff --git linux-libre-6.7-gnu/arch/arm64/include/asm/vncr_mapping.h linux-libre-6.8-gnu/arch/arm64/include/asm/vncr_mapping.h
new file mode 100644
index 000000000000..df2c47c55972
--- /dev/null
+++ linux-libre-6.8-gnu/arch/arm64/include/asm/vncr_mapping.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * System register offsets in the VNCR page
+ * All offsets are *byte* displacements!
+ */
+
+#ifndef __ARM64_VNCR_MAPPING_H__
+#define __ARM64_VNCR_MAPPING_H__
+
+#define VNCR_VTTBR_EL2          0x020
+#define VNCR_VTCR_EL2           0x040
+#define VNCR_VMPIDR_EL2         0x050
+#define VNCR_CNTVOFF_EL2        0x060
+#define VNCR_HCR_EL2            0x078
+#define VNCR_HSTR_EL2           0x080
+#define VNCR_VPIDR_EL2          0x088
+#define VNCR_TPIDR_EL2          0x090
+#define VNCR_HCRX_EL2           0x0A0
+#define VNCR_VNCR_EL2           0x0B0
+#define VNCR_CPACR_EL1          0x100
+#define VNCR_CONTEXTIDR_EL1     0x108
+#define VNCR_SCTLR_EL1          0x110
+#define VNCR_ACTLR_EL1          0x118
+#define VNCR_TCR_EL1            0x120
+#define VNCR_AFSR0_EL1          0x128
+#define VNCR_AFSR1_EL1          0x130
+#define VNCR_ESR_EL1            0x138
+#define VNCR_MAIR_EL1           0x140
+#define VNCR_AMAIR_EL1          0x148
+#define VNCR_MDSCR_EL1          0x158
+#define VNCR_SPSR_EL1           0x160
+#define VNCR_CNTV_CVAL_EL0      0x168
+#define VNCR_CNTV_CTL_EL0       0x170
+#define VNCR_CNTP_CVAL_EL0      0x178
+#define VNCR_CNTP_CTL_EL0       0x180
+#define VNCR_SCXTNUM_EL1        0x188
+#define VNCR_TFSR_EL1		0x190
+#define VNCR_HFGRTR_EL2		0x1B8
+#define VNCR_HFGWTR_EL2		0x1C0
+#define VNCR_HFGITR_EL2		0x1C8
+#define VNCR_HDFGRTR_EL2	0x1D0
+#define VNCR_HDFGWTR_EL2	0x1D8
+#define VNCR_ZCR_EL1            0x1E0
+#define VNCR_HAFGRTR_EL2	0x1E8
+#define VNCR_TTBR0_EL1          0x200
+#define VNCR_TTBR1_EL1          0x210
+#define VNCR_FAR_EL1            0x220
+#define VNCR_ELR_EL1            0x230
+#define VNCR_SP_EL1             0x240
+#define VNCR_VBAR_EL1           0x250
+#define VNCR_TCR2_EL1		0x270
+#define VNCR_PIRE0_EL1		0x290
+#define VNCR_PIRE0_EL2		0x298
+#define VNCR_PIR_EL1		0x2A0
+#define VNCR_ICH_LR0_EL2        0x400
+#define VNCR_ICH_LR1_EL2        0x408
+#define VNCR_ICH_LR2_EL2        0x410
+#define VNCR_ICH_LR3_EL2        0x418
+#define VNCR_ICH_LR4_EL2        0x420
+#define VNCR_ICH_LR5_EL2        0x428
+#define VNCR_ICH_LR6_EL2        0x430
+#define VNCR_ICH_LR7_EL2        0x438
+#define VNCR_ICH_LR8_EL2        0x440
+#define VNCR_ICH_LR9_EL2        0x448
+#define VNCR_ICH_LR10_EL2       0x450
+#define VNCR_ICH_LR11_EL2       0x458
+#define VNCR_ICH_LR12_EL2       0x460
+#define VNCR_ICH_LR13_EL2       0x468
+#define VNCR_ICH_LR14_EL2       0x470
+#define VNCR_ICH_LR15_EL2       0x478
+#define VNCR_ICH_AP0R0_EL2      0x480
+#define VNCR_ICH_AP0R1_EL2      0x488
+#define VNCR_ICH_AP0R2_EL2      0x490
+#define VNCR_ICH_AP0R3_EL2      0x498
+#define VNCR_ICH_AP1R0_EL2      0x4A0
+#define VNCR_ICH_AP1R1_EL2      0x4A8
+#define VNCR_ICH_AP1R2_EL2      0x4B0
+#define VNCR_ICH_AP1R3_EL2      0x4B8
+#define VNCR_ICH_HCR_EL2        0x4C0
+#define VNCR_ICH_VMCR_EL2       0x4C8
+#define VNCR_VDISR_EL2          0x500
+#define VNCR_PMBLIMITR_EL1      0x800
+#define VNCR_PMBPTR_EL1         0x810
+#define VNCR_PMBSR_EL1          0x820
+#define VNCR_PMSCR_EL1          0x828
+#define VNCR_PMSEVFR_EL1        0x830
+#define VNCR_PMSICR_EL1         0x838
+#define VNCR_PMSIRR_EL1         0x840
+#define VNCR_PMSLATFR_EL1       0x848
+#define VNCR_TRFCR_EL1          0x880
+#define VNCR_MPAM1_EL1          0x900
+#define VNCR_MPAMHCR_EL2        0x930
+#define VNCR_MPAMVPMV_EL2       0x938
+#define VNCR_MPAMVPM0_EL2       0x940
+#define VNCR_MPAMVPM1_EL2       0x948
+#define VNCR_MPAMVPM2_EL2       0x950
+#define VNCR_MPAMVPM3_EL2       0x958
+#define VNCR_MPAMVPM4_EL2       0x960
+#define VNCR_MPAMVPM5_EL2       0x968
+#define VNCR_MPAMVPM6_EL2       0x970
+#define VNCR_MPAMVPM7_EL2       0x978
+
+#endif /* __ARM64_VNCR_MAPPING_H__ */
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/Makefile linux-libre-6.8-gnu/arch/arm64/kernel/Makefile
index d95b3d6b471a..467cb7117273 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/kernel/Makefile
@@ -73,7 +73,13 @@ obj-$(CONFIG_ARM64_MTE)			+= mte.o
 obj-y					+= vdso-wrap.o
 obj-$(CONFIG_COMPAT_VDSO)		+= vdso32-wrap.o
 obj-$(CONFIG_UNWIND_PATCH_PAC_INTO_SCS)	+= patch-scs.o
+
+# We need to prevent the SCS patching code from patching itself. Using
+# -mbranch-protection=none here to avoid the patchable PAC opcodes from being
+# generated triggers an issue with full LTO on Clang, which stops emitting PAC
+# instructions altogether. So disable LTO as well for the compilation unit.
 CFLAGS_patch-scs.o			+= -mbranch-protection=none
+CFLAGS_REMOVE_patch-scs.o		+= $(CC_FLAGS_LTO)
 
 # Force dependency (vdso*-wrap.S includes vdso.so through incbin)
 $(obj)/vdso-wrap.o: $(obj)/vdso/vdso.so
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/asm-offsets.c linux-libre-6.8-gnu/arch/arm64/kernel/asm-offsets.c
index 5ff1942b04fc..5a7dbbe0ce63 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/asm-offsets.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/asm-offsets.c
@@ -117,8 +117,6 @@ int main(void)
   DEFINE(DMA_FROM_DEVICE,	DMA_FROM_DEVICE);
   BLANK();
   DEFINE(PREEMPT_DISABLE_OFFSET, PREEMPT_DISABLE_OFFSET);
-  DEFINE(SOFTIRQ_SHIFT, SOFTIRQ_SHIFT);
-  DEFINE(IRQ_CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
   BLANK();
   DEFINE(CPU_BOOT_TASK,		offsetof(struct secondary_data, task));
   BLANK();
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/cpu_errata.c linux-libre-6.8-gnu/arch/arm64/kernel/cpu_errata.c
index e29e0fea63fb..76b8dd37092a 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/cpu_errata.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/cpu_errata.c
@@ -374,6 +374,7 @@ static const struct midr_range erratum_1463225[] = {
 static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_2139208
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2119858
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
@@ -387,6 +388,7 @@ static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
 static const struct midr_range tsb_flush_fail_cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_2067961
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2054223
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
@@ -399,6 +401,7 @@ static const struct midr_range tsb_flush_fail_cpus[] = {
 static struct midr_range trbe_write_out_of_range_cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_2253138
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2224489
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
@@ -416,6 +419,19 @@ static struct midr_range broken_aarch32_aes[] = {
 };
 #endif /* CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE */
 
+#ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+static const struct midr_range erratum_spec_unpriv_load_list[] = {
+#ifdef CONFIG_ARM64_ERRATUM_3117295
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A510),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2966298
+	/* Cortex-A520 r0p0 to r0p1 */
+	MIDR_REV_RANGE(MIDR_CORTEX_A520, 0, 0, 1),
+#endif
+	{},
+};
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
 	{
@@ -713,12 +729,12 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		MIDR_FIXED(MIDR_CPU_VAR_REV(1,1), BIT(25)),
 	},
 #endif
-#ifdef CONFIG_ARM64_ERRATUM_2966298
+#ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
 	{
-		.desc = "ARM erratum 2966298",
-		.capability = ARM64_WORKAROUND_2966298,
+		.desc = "ARM errata 2966298, 3117295",
+		.capability = ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD,
 		/* Cortex-A520 r0p0 - r0p1 */
-		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A520, 0, 0, 1),
+		ERRATA_MIDR_RANGE_LIST(erratum_spec_unpriv_load_list),
 	},
 #endif
 #ifdef CONFIG_AMPERE_ERRATUM_AC03_CPU_38
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/cpufeature.c linux-libre-6.8-gnu/arch/arm64/kernel/cpufeature.c
index 91d2d6714969..8d1a634a403e 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/cpufeature.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/cpufeature.c
@@ -1081,25 +1081,6 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
 
 	if (id_aa64pfr1_mte(info->reg_id_aa64pfr1))
 		init_cpu_ftr_reg(SYS_GMID_EL1, info->reg_gmid);
-
-	/*
-	 * Initialize the indirect array of CPU capabilities pointers before we
-	 * handle the boot CPU below.
-	 */
-	init_cpucap_indirect_list();
-
-	/*
-	 * Detect broken pseudo-NMI. Must be called _before_ the call to
-	 * setup_boot_cpu_capabilities() since it interacts with
-	 * can_use_gic_priorities().
-	 */
-	detect_system_supports_pseudo_nmi();
-
-	/*
-	 * Detect and enable early CPU capabilities based on the boot CPU,
-	 * after we have initialised the CPU feature infrastructure.
-	 */
-	setup_boot_cpu_capabilities();
 }
 
 static void update_cpu_ftr_reg(struct arm64_ftr_reg *reg, u64 new)
@@ -1584,16 +1565,6 @@ static bool has_useable_gicv3_cpuif(const struct arm64_cpu_capabilities *entry,
 	return has_sre;
 }
 
-static bool has_no_hw_prefetch(const struct arm64_cpu_capabilities *entry, int __unused)
-{
-	u32 midr = read_cpuid_id();
-
-	/* Cavium ThunderX pass 1.x and 2.x */
-	return midr_is_cpu_model_range(midr, MIDR_THUNDERX,
-		MIDR_CPU_VAR_REV(0, 0),
-		MIDR_CPU_VAR_REV(1, MIDR_REVISION_MASK));
-}
-
 static bool has_cache_idc(const struct arm64_cpu_capabilities *entry,
 			  int scope)
 {
@@ -1768,6 +1739,39 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry,
 	return !meltdown_safe;
 }
 
+#if defined(ID_AA64MMFR0_EL1_TGRAN_LPA2) && defined(ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_LPA2)
+static bool has_lpa2_at_stage1(u64 mmfr0)
+{
+	unsigned int tgran;
+
+	tgran = cpuid_feature_extract_unsigned_field(mmfr0,
+					ID_AA64MMFR0_EL1_TGRAN_SHIFT);
+	return tgran == ID_AA64MMFR0_EL1_TGRAN_LPA2;
+}
+
+static bool has_lpa2_at_stage2(u64 mmfr0)
+{
+	unsigned int tgran;
+
+	tgran = cpuid_feature_extract_unsigned_field(mmfr0,
+					ID_AA64MMFR0_EL1_TGRAN_2_SHIFT);
+	return tgran == ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_LPA2;
+}
+
+static bool has_lpa2(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	u64 mmfr0;
+
+	mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
+	return has_lpa2_at_stage1(mmfr0) && has_lpa2_at_stage2(mmfr0);
+}
+#else
+static bool has_lpa2(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	return false;
+}
+#endif
+
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
 #define KPTI_NG_TEMP_VA		(-(1UL << PMD_SHIFT))
 
@@ -1840,7 +1844,7 @@ static int __init __kpti_install_ng_mappings(void *__unused)
 static void __init kpti_install_ng_mappings(void)
 {
 	/* Check whether KPTI is going to be used */
-	if (!cpus_have_cap(ARM64_UNMAP_KERNEL_AT_EL0))
+	if (!arm64_kernel_unmapped_at_el0())
 		return;
 
 	/*
@@ -2325,12 +2329,6 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, ATOMIC, IMP)
 	},
 #endif /* CONFIG_ARM64_LSE_ATOMICS */
-	{
-		.desc = "Software prefetching using PRFM",
-		.capability = ARM64_HAS_NO_HW_PREFETCH,
-		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
-		.matches = has_no_hw_prefetch,
-	},
 	{
 		.desc = "Virtualization Host Extensions",
 		.capability = ARM64_HAS_VIRT_HOST_EXTN,
@@ -2343,7 +2341,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_NESTED_VIRT,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_nested_virt_support,
-		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, NV, IMP)
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, NV, NV2)
 	},
 	{
 		.capability = ARM64_HAS_32BIT_EL0_DO_NOT_USE,
@@ -2735,6 +2733,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, EVT, IMP)
 	},
+	{
+		.desc = "52-bit Virtual Addressing for KVM (LPA2)",
+		.capability = ARM64_HAS_LPA2,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_lpa2,
+	},
 	{},
 };
 
@@ -3275,14 +3279,6 @@ void check_local_cpu_capabilities(void)
 		verify_local_cpu_capabilities();
 }
 
-static void __init setup_boot_cpu_capabilities(void)
-{
-	/* Detect capabilities with either SCOPE_BOOT_CPU or SCOPE_LOCAL_CPU */
-	update_cpu_capabilities(SCOPE_BOOT_CPU | SCOPE_LOCAL_CPU);
-	/* Enable the SCOPE_BOOT_CPU capabilities alone right away */
-	enable_cpu_capabilities(SCOPE_BOOT_CPU);
-}
-
 bool this_cpu_has_cap(unsigned int n)
 {
 	if (!WARN_ON(preemptible()) && n < ARM64_NCAPS) {
@@ -3338,37 +3334,52 @@ unsigned long cpu_get_elf_hwcap2(void)
 	return elf_hwcap[1];
 }
 
-void __init setup_system_features(void)
+static void __init setup_boot_cpu_capabilities(void)
 {
-	int i;
 	/*
-	 * The system-wide safe feature feature register values have been
-	 * finalized. Finalize and log the available system capabilities.
+	 * The boot CPU's feature register values have been recorded. Detect
+	 * boot cpucaps and local cpucaps for the boot CPU, then enable and
+	 * patch alternatives for the available boot cpucaps.
 	 */
-	update_cpu_capabilities(SCOPE_SYSTEM);
-	if (IS_ENABLED(CONFIG_ARM64_SW_TTBR0_PAN) &&
-	    !cpus_have_cap(ARM64_HAS_PAN))
-		pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n");
+	update_cpu_capabilities(SCOPE_BOOT_CPU | SCOPE_LOCAL_CPU);
+	enable_cpu_capabilities(SCOPE_BOOT_CPU);
+	apply_boot_alternatives();
+}
 
+void __init setup_boot_cpu_features(void)
+{
 	/*
-	 * Enable all the available capabilities which have not been enabled
-	 * already.
+	 * Initialize the indirect array of CPU capabilities pointers before we
+	 * handle the boot CPU.
 	 */
-	enable_cpu_capabilities(SCOPE_ALL & ~SCOPE_BOOT_CPU);
+	init_cpucap_indirect_list();
 
-	kpti_install_ng_mappings();
+	/*
+	 * Detect broken pseudo-NMI. Must be called _before_ the call to
+	 * setup_boot_cpu_capabilities() since it interacts with
+	 * can_use_gic_priorities().
+	 */
+	detect_system_supports_pseudo_nmi();
 
-	sve_setup();
-	sme_setup();
+	setup_boot_cpu_capabilities();
+}
 
+static void __init setup_system_capabilities(void)
+{
 	/*
-	 * Check for sane CTR_EL0.CWG value.
+	 * The system-wide safe feature register values have been finalized.
+	 * Detect, enable, and patch alternatives for the available system
+	 * cpucaps.
 	 */
-	if (!cache_type_cwg())
-		pr_warn("No Cache Writeback Granule information, assuming %d\n",
-			ARCH_DMA_MINALIGN);
+	update_cpu_capabilities(SCOPE_SYSTEM);
+	enable_cpu_capabilities(SCOPE_ALL & ~SCOPE_BOOT_CPU);
+	apply_alternatives_all();
 
-	for (i = 0; i < ARM64_NCAPS; i++) {
+	/*
+	 * Log any cpucaps with a cpumask as these aren't logged by
+	 * update_cpu_capabilities().
+	 */
+	for (int i = 0; i < ARM64_NCAPS; i++) {
 		const struct arm64_cpu_capabilities *caps = cpucap_ptrs[i];
 
 		if (caps && caps->cpus && caps->desc &&
@@ -3376,6 +3387,29 @@ void __init setup_system_features(void)
 			pr_info("detected: %s on CPU%*pbl\n",
 				caps->desc, cpumask_pr_args(caps->cpus));
 	}
+
+	/*
+	 * TTBR0 PAN doesn't have its own cpucap, so log it manually.
+	 */
+	if (system_uses_ttbr0_pan())
+		pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n");
+}
+
+void __init setup_system_features(void)
+{
+	setup_system_capabilities();
+
+	kpti_install_ng_mappings();
+
+	sve_setup();
+	sme_setup();
+
+	/*
+	 * Check for sane CTR_EL0.CWG value.
+	 */
+	if (!cache_type_cwg())
+		pr_warn("No Cache Writeback Granule information, assuming %d\n",
+			ARCH_DMA_MINALIGN);
 }
 
 void __init setup_user_features(void)
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/cpuinfo.c linux-libre-6.8-gnu/arch/arm64/kernel/cpuinfo.c
index a257da7b56fe..47043c0d95ec 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/cpuinfo.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/cpuinfo.c
@@ -36,8 +36,6 @@ static struct cpuinfo_arm64 boot_cpu_data;
 static inline const char *icache_policy_str(int l1ip)
 {
 	switch (l1ip) {
-	case CTR_EL0_L1Ip_VPIPT:
-		return "VPIPT";
 	case CTR_EL0_L1Ip_VIPT:
 		return "VIPT";
 	case CTR_EL0_L1Ip_PIPT:
@@ -388,9 +386,6 @@ static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info)
 	switch (l1ip) {
 	case CTR_EL0_L1Ip_PIPT:
 		break;
-	case CTR_EL0_L1Ip_VPIPT:
-		set_bit(ICACHEF_VPIPT, &__icache_flags);
-		break;
 	case CTR_EL0_L1Ip_VIPT:
 	default:
 		/* Assume aliasing */
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/entry.S linux-libre-6.8-gnu/arch/arm64/kernel/entry.S
index a6030913cd58..7ef0e127b149 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/entry.S
+++ linux-libre-6.8-gnu/arch/arm64/kernel/entry.S
@@ -428,16 +428,9 @@ alternative_else_nop_endif
 	ldp	x28, x29, [sp, #16 * 14]
 
 	.if	\el == 0
-alternative_if ARM64_WORKAROUND_2966298
-	tlbi	vale1, xzr
-	dsb	nsh
-alternative_else_nop_endif
-alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
-	ldr	lr, [sp, #S_LR]
-	add	sp, sp, #PT_REGS_SIZE		// restore sp
-	eret
-alternative_else_nop_endif
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+	alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
+
 	msr	far_el1, x29
 
 	ldr_this_cpu	x30, this_cpu_vector, x29
@@ -446,16 +439,26 @@ alternative_else_nop_endif
 	ldr		lr, [sp, #S_LR]		// restore x30
 	add		sp, sp, #PT_REGS_SIZE	// restore sp
 	br		x29
+
+.L_skip_tramp_exit_\@:
 #endif
-	.else
+	.endif
+
 	ldr	lr, [sp, #S_LR]
 	add	sp, sp, #PT_REGS_SIZE		// restore sp
 
+	.if \el == 0
+	/* This must be after the last explicit memory access */
+alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	tlbi	vale1, xzr
+	dsb	nsh
+alternative_else_nop_endif
+	.else
 	/* Ensure any device/NC reads complete */
 	alternative_insn nop, "dmb sy", ARM64_WORKAROUND_1508412
+	.endif
 
 	eret
-	.endif
 	sb
 	.endm
 
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/fpsimd.c linux-libre-6.8-gnu/arch/arm64/kernel/fpsimd.c
index 1559c706d32d..f27acca550d5 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/fpsimd.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/fpsimd.c
@@ -85,13 +85,13 @@
  * softirq kicks in. Upon vcpu_put(), KVM will save the vcpu FP state and
  * flag the register state as invalid.
  *
- * In order to allow softirq handlers to use FPSIMD, kernel_neon_begin() may
- * save the task's FPSIMD context back to task_struct from softirq context.
- * To prevent this from racing with the manipulation of the task's FPSIMD state
- * from task context and thereby corrupting the state, it is necessary to
- * protect any manipulation of a task's fpsimd_state or TIF_FOREIGN_FPSTATE
- * flag with {, __}get_cpu_fpsimd_context(). This will still allow softirqs to
- * run but prevent them to use FPSIMD.
+ * In order to allow softirq handlers to use FPSIMD, kernel_neon_begin() may be
+ * called from softirq context, which will save the task's FPSIMD context back
+ * to task_struct. To prevent this from racing with the manipulation of the
+ * task's FPSIMD state from task context and thereby corrupting the state, it
+ * is necessary to protect any manipulation of a task's fpsimd_state or
+ * TIF_FOREIGN_FPSTATE flag with get_cpu_fpsimd_context(), which will suspend
+ * softirq servicing entirely until put_cpu_fpsimd_context() is called.
  *
  * For a certain task, the sequence may look something like this:
  * - the task gets scheduled in; if both the task's fpsimd_cpu field
@@ -209,27 +209,14 @@ static inline void sme_free(struct task_struct *t) { }
 
 #endif
 
-DEFINE_PER_CPU(bool, fpsimd_context_busy);
-EXPORT_PER_CPU_SYMBOL(fpsimd_context_busy);
-
 static void fpsimd_bind_task_to_cpu(void);
 
-static void __get_cpu_fpsimd_context(void)
-{
-	bool busy = __this_cpu_xchg(fpsimd_context_busy, true);
-
-	WARN_ON(busy);
-}
-
 /*
  * Claim ownership of the CPU FPSIMD context for use by the calling context.
  *
  * The caller may freely manipulate the FPSIMD context metadata until
  * put_cpu_fpsimd_context() is called.
  *
- * The double-underscore version must only be called if you know the task
- * can't be preempted.
- *
  * On RT kernels local_bh_disable() is not sufficient because it only
  * serializes soft interrupt related sections via a local lock, but stays
  * preemptible. Disabling preemption is the right choice here as bottom
@@ -242,14 +229,6 @@ static void get_cpu_fpsimd_context(void)
 		local_bh_disable();
 	else
 		preempt_disable();
-	__get_cpu_fpsimd_context();
-}
-
-static void __put_cpu_fpsimd_context(void)
-{
-	bool busy = __this_cpu_xchg(fpsimd_context_busy, false);
-
-	WARN_ON(!busy); /* No matching get_cpu_fpsimd_context()? */
 }
 
 /*
@@ -261,18 +240,12 @@ static void __put_cpu_fpsimd_context(void)
  */
 static void put_cpu_fpsimd_context(void)
 {
-	__put_cpu_fpsimd_context();
 	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
 		local_bh_enable();
 	else
 		preempt_enable();
 }
 
-static bool have_cpu_fpsimd_context(void)
-{
-	return !preemptible() && __this_cpu_read(fpsimd_context_busy);
-}
-
 unsigned int task_get_vl(const struct task_struct *task, enum vec_type type)
 {
 	return task->thread.vl[type];
@@ -383,7 +356,8 @@ static void task_fpsimd_load(void)
 	bool restore_ffr;
 
 	WARN_ON(!system_supports_fpsimd());
-	WARN_ON(!have_cpu_fpsimd_context());
+	WARN_ON(preemptible());
+	WARN_ON(test_thread_flag(TIF_KERNEL_FPSTATE));
 
 	if (system_supports_sve() || system_supports_sme()) {
 		switch (current->thread.fp_type) {
@@ -406,7 +380,7 @@ static void task_fpsimd_load(void)
 		default:
 			/*
 			 * This indicates either a bug in
-			 * fpsimd_save() or memory corruption, we
+			 * fpsimd_save_user_state() or memory corruption, we
 			 * should always record an explicit format
 			 * when we save. We always at least have the
 			 * memory allocated for FPSMID registers so
@@ -457,7 +431,7 @@ static void task_fpsimd_load(void)
  * than via current, if we are saving KVM state then it will have
  * ensured that the type of registers to save is set in last->to_save.
  */
-static void fpsimd_save(void)
+static void fpsimd_save_user_state(void)
 {
 	struct cpu_fp_state const *last =
 		this_cpu_ptr(&fpsimd_last_state);
@@ -467,7 +441,7 @@ static void fpsimd_save(void)
 	unsigned int vl;
 
 	WARN_ON(!system_supports_fpsimd());
-	WARN_ON(!have_cpu_fpsimd_context());
+	WARN_ON(preemptible());
 
 	if (test_thread_flag(TIF_FOREIGN_FPSTATE))
 		return;
@@ -888,7 +862,7 @@ int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 	if (task == current) {
 		get_cpu_fpsimd_context();
 
-		fpsimd_save();
+		fpsimd_save_user_state();
 	}
 
 	fpsimd_flush_task_state(task);
@@ -924,10 +898,8 @@ int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 	 * allocate SVE now in case it is needed for use in streaming
 	 * mode.
 	 */
-	if (system_supports_sve()) {
-		sve_free(task);
-		sve_alloc(task, true);
-	}
+	sve_free(task);
+	sve_alloc(task, true);
 
 	if (free_sme)
 		sme_free(task);
@@ -1171,7 +1143,7 @@ void __init sve_setup(void)
 	unsigned long b;
 	int max_bit;
 
-	if (!cpus_have_cap(ARM64_SVE))
+	if (!system_supports_sve())
 		return;
 
 	/*
@@ -1245,8 +1217,10 @@ void fpsimd_release_task(struct task_struct *dead_task)
  */
 void sme_alloc(struct task_struct *task, bool flush)
 {
-	if (task->thread.sme_state && flush) {
-		memset(task->thread.sme_state, 0, sme_state_size(task));
+	if (task->thread.sme_state) {
+		if (flush)
+			memset(task->thread.sme_state, 0,
+			       sme_state_size(task));
 		return;
 	}
 
@@ -1301,7 +1275,7 @@ void __init sme_setup(void)
 	struct vl_info *info = &vl_info[ARM64_VEC_SME];
 	int min_bit, max_bit;
 
-	if (!cpus_have_cap(ARM64_SME))
+	if (!system_supports_sme())
 		return;
 
 	/*
@@ -1337,6 +1311,22 @@ void __init sme_setup(void)
 		get_sme_default_vl());
 }
 
+void sme_suspend_exit(void)
+{
+	u64 smcr = 0;
+
+	if (!system_supports_sme())
+		return;
+
+	if (system_supports_fa64())
+		smcr |= SMCR_ELx_FA64;
+	if (system_supports_sme2())
+		smcr |= SMCR_ELx_EZT0;
+
+	write_sysreg_s(smcr, SYS_SMCR_EL1);
+	write_sysreg_s(0, SYS_SMPRI_EL1);
+}
+
 #endif /* CONFIG_ARM64_SME */
 
 static void sve_init_regs(void)
@@ -1500,6 +1490,34 @@ void do_fpsimd_exc(unsigned long esr, struct pt_regs *regs)
 		       current);
 }
 
+static void fpsimd_load_kernel_state(struct task_struct *task)
+{
+	struct cpu_fp_state *last = this_cpu_ptr(&fpsimd_last_state);
+
+	/*
+	 * Elide the load if this CPU holds the most recent kernel mode
+	 * FPSIMD context of the current task.
+	 */
+	if (last->st == &task->thread.kernel_fpsimd_state &&
+	    task->thread.kernel_fpsimd_cpu == smp_processor_id())
+		return;
+
+	fpsimd_load_state(&task->thread.kernel_fpsimd_state);
+}
+
+static void fpsimd_save_kernel_state(struct task_struct *task)
+{
+	struct cpu_fp_state cpu_fp_state = {
+		.st		= &task->thread.kernel_fpsimd_state,
+		.to_save	= FP_STATE_FPSIMD,
+	};
+
+	fpsimd_save_state(&task->thread.kernel_fpsimd_state);
+	fpsimd_bind_state_to_cpu(&cpu_fp_state);
+
+	task->thread.kernel_fpsimd_cpu = smp_processor_id();
+}
+
 void fpsimd_thread_switch(struct task_struct *next)
 {
 	bool wrong_task, wrong_cpu;
@@ -1507,24 +1525,31 @@ void fpsimd_thread_switch(struct task_struct *next)
 	if (!system_supports_fpsimd())
 		return;
 
-	__get_cpu_fpsimd_context();
+	WARN_ON_ONCE(!irqs_disabled());
 
 	/* Save unsaved fpsimd state, if any: */
-	fpsimd_save();
-
-	/*
-	 * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's
-	 * state.  For kernel threads, FPSIMD registers are never loaded
-	 * and wrong_task and wrong_cpu will always be true.
-	 */
-	wrong_task = __this_cpu_read(fpsimd_last_state.st) !=
-					&next->thread.uw.fpsimd_state;
-	wrong_cpu = next->thread.fpsimd_cpu != smp_processor_id();
+	if (test_thread_flag(TIF_KERNEL_FPSTATE))
+		fpsimd_save_kernel_state(current);
+	else
+		fpsimd_save_user_state();
 
-	update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE,
-			       wrong_task || wrong_cpu);
+	if (test_tsk_thread_flag(next, TIF_KERNEL_FPSTATE)) {
+		fpsimd_load_kernel_state(next);
+		set_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE);
+	} else {
+		/*
+		 * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's
+		 * state.  For kernel threads, FPSIMD registers are never
+		 * loaded with user mode FPSIMD state and so wrong_task and
+		 * wrong_cpu will always be true.
+		 */
+		wrong_task = __this_cpu_read(fpsimd_last_state.st) !=
+			&next->thread.uw.fpsimd_state;
+		wrong_cpu = next->thread.fpsimd_cpu != smp_processor_id();
 
-	__put_cpu_fpsimd_context();
+		update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE,
+				       wrong_task || wrong_cpu);
+	}
 }
 
 static void fpsimd_flush_thread_vl(enum vec_type type)
@@ -1614,7 +1639,7 @@ void fpsimd_preserve_current_state(void)
 		return;
 
 	get_cpu_fpsimd_context();
-	fpsimd_save();
+	fpsimd_save_user_state();
 	put_cpu_fpsimd_context();
 }
 
@@ -1626,7 +1651,7 @@ void fpsimd_preserve_current_state(void)
 void fpsimd_signal_preserve_current_state(void)
 {
 	fpsimd_preserve_current_state();
-	if (test_thread_flag(TIF_SVE))
+	if (current->thread.fp_type == FP_STATE_SVE)
 		sve_to_fpsimd(current);
 }
 
@@ -1826,13 +1851,15 @@ static void fpsimd_flush_cpu_state(void)
  */
 void fpsimd_save_and_flush_cpu_state(void)
 {
+	unsigned long flags;
+
 	if (!system_supports_fpsimd())
 		return;
 	WARN_ON(preemptible());
-	__get_cpu_fpsimd_context();
-	fpsimd_save();
+	local_irq_save(flags);
+	fpsimd_save_user_state();
 	fpsimd_flush_cpu_state();
-	__put_cpu_fpsimd_context();
+	local_irq_restore(flags);
 }
 
 #ifdef CONFIG_KERNEL_MODE_NEON
@@ -1864,10 +1891,37 @@ void kernel_neon_begin(void)
 	get_cpu_fpsimd_context();
 
 	/* Save unsaved fpsimd state, if any: */
-	fpsimd_save();
+	if (test_thread_flag(TIF_KERNEL_FPSTATE)) {
+		BUG_ON(IS_ENABLED(CONFIG_PREEMPT_RT) || !in_serving_softirq());
+		fpsimd_save_kernel_state(current);
+	} else {
+		fpsimd_save_user_state();
+
+		/*
+		 * Set the thread flag so that the kernel mode FPSIMD state
+		 * will be context switched along with the rest of the task
+		 * state.
+		 *
+		 * On non-PREEMPT_RT, softirqs may interrupt task level kernel
+		 * mode FPSIMD, but the task will not be preemptible so setting
+		 * TIF_KERNEL_FPSTATE for those would be both wrong (as it
+		 * would mark the task context FPSIMD state as requiring a
+		 * context switch) and unnecessary.
+		 *
+		 * On PREEMPT_RT, softirqs are serviced from a separate thread,
+		 * which is scheduled as usual, and this guarantees that these
+		 * softirqs are not interrupting use of the FPSIMD in kernel
+		 * mode in task context. So in this case, setting the flag here
+		 * is always appropriate.
+		 */
+		if (IS_ENABLED(CONFIG_PREEMPT_RT) || !in_serving_softirq())
+			set_thread_flag(TIF_KERNEL_FPSTATE);
+	}
 
 	/* Invalidate any task state remaining in the fpsimd regs: */
 	fpsimd_flush_cpu_state();
+
+	put_cpu_fpsimd_context();
 }
 EXPORT_SYMBOL_GPL(kernel_neon_begin);
 
@@ -1885,7 +1939,16 @@ void kernel_neon_end(void)
 	if (!system_supports_fpsimd())
 		return;
 
-	put_cpu_fpsimd_context();
+	/*
+	 * If we are returning from a nested use of kernel mode FPSIMD, restore
+	 * the task context kernel mode FPSIMD state. This can only happen when
+	 * running in softirq context on non-PREEMPT_RT.
+	 */
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT) && in_serving_softirq() &&
+	    test_thread_flag(TIF_KERNEL_FPSTATE))
+		fpsimd_load_kernel_state(current);
+	else
+		clear_thread_flag(TIF_KERNEL_FPSTATE);
 }
 EXPORT_SYMBOL_GPL(kernel_neon_end);
 
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/head.S linux-libre-6.8-gnu/arch/arm64/kernel/head.S
index 7b236994f0e1..cab7f91949d8 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/head.S
+++ linux-libre-6.8-gnu/arch/arm64/kernel/head.S
@@ -482,7 +482,7 @@ SYM_FUNC_START_LOCAL(__primary_switched)
 
 	str_l	x21, __fdt_pointer, x5		// Save FDT pointer
 
-	ldr_l	x4, kimage_vaddr		// Save the offset between
+	adrp	x4, _text			// Save the offset between
 	sub	x4, x4, x0			// the kernel virtual and
 	str_l	x4, kimage_voffset, x5		// physical mappings
 
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/idreg-override.c linux-libre-6.8-gnu/arch/arm64/kernel/idreg-override.c
index 3addc09f8746..e30fd9e32ef3 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/idreg-override.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/idreg-override.c
@@ -21,14 +21,25 @@
 
 static u64 __boot_status __initdata;
 
+// temporary __prel64 related definitions
+// to be removed when this code is moved under pi/
+
+#define __prel64_initconst	__initconst
+
+#define PREL64(type, name)	union { type *name; }
+
+#define prel64_pointer(__d)	(__d)
+
+typedef bool filter_t(u64 val);
+
 struct ftr_set_desc {
 	char 				name[FTR_DESC_NAME_LEN];
-	struct arm64_ftr_override	*override;
+	PREL64(struct arm64_ftr_override, override);
 	struct {
 		char			name[FTR_DESC_FIELD_LEN];
 		u8			shift;
 		u8			width;
-		bool			(*filter)(u64 val);
+		PREL64(filter_t,	filter);
 	} 				fields[];
 };
 
@@ -46,7 +57,7 @@ static bool __init mmfr1_vh_filter(u64 val)
 		 val == 0);
 }
 
-static const struct ftr_set_desc mmfr1 __initconst = {
+static const struct ftr_set_desc mmfr1 __prel64_initconst = {
 	.name		= "id_aa64mmfr1",
 	.override	= &id_aa64mmfr1_override,
 	.fields		= {
@@ -70,7 +81,7 @@ static bool __init pfr0_sve_filter(u64 val)
 	return true;
 }
 
-static const struct ftr_set_desc pfr0 __initconst = {
+static const struct ftr_set_desc pfr0 __prel64_initconst = {
 	.name		= "id_aa64pfr0",
 	.override	= &id_aa64pfr0_override,
 	.fields		= {
@@ -94,7 +105,7 @@ static bool __init pfr1_sme_filter(u64 val)
 	return true;
 }
 
-static const struct ftr_set_desc pfr1 __initconst = {
+static const struct ftr_set_desc pfr1 __prel64_initconst = {
 	.name		= "id_aa64pfr1",
 	.override	= &id_aa64pfr1_override,
 	.fields		= {
@@ -105,7 +116,7 @@ static const struct ftr_set_desc pfr1 __initconst = {
 	},
 };
 
-static const struct ftr_set_desc isar1 __initconst = {
+static const struct ftr_set_desc isar1 __prel64_initconst = {
 	.name		= "id_aa64isar1",
 	.override	= &id_aa64isar1_override,
 	.fields		= {
@@ -117,7 +128,7 @@ static const struct ftr_set_desc isar1 __initconst = {
 	},
 };
 
-static const struct ftr_set_desc isar2 __initconst = {
+static const struct ftr_set_desc isar2 __prel64_initconst = {
 	.name		= "id_aa64isar2",
 	.override	= &id_aa64isar2_override,
 	.fields		= {
@@ -128,7 +139,7 @@ static const struct ftr_set_desc isar2 __initconst = {
 	},
 };
 
-static const struct ftr_set_desc smfr0 __initconst = {
+static const struct ftr_set_desc smfr0 __prel64_initconst = {
 	.name		= "id_aa64smfr0",
 	.override	= &id_aa64smfr0_override,
 	.fields		= {
@@ -149,7 +160,7 @@ static bool __init hvhe_filter(u64 val)
 						     ID_AA64MMFR1_EL1_VH_SHIFT));
 }
 
-static const struct ftr_set_desc sw_features __initconst = {
+static const struct ftr_set_desc sw_features __prel64_initconst = {
 	.name		= "arm64_sw",
 	.override	= &arm64_sw_feature_override,
 	.fields		= {
@@ -159,22 +170,23 @@ static const struct ftr_set_desc sw_features __initconst = {
 	},
 };
 
-static const struct ftr_set_desc * const regs[] __initconst = {
-	&mmfr1,
-	&pfr0,
-	&pfr1,
-	&isar1,
-	&isar2,
-	&smfr0,
-	&sw_features,
+static const
+PREL64(const struct ftr_set_desc, reg) regs[] __prel64_initconst = {
+	{ &mmfr1	},
+	{ &pfr0 	},
+	{ &pfr1 	},
+	{ &isar1	},
+	{ &isar2	},
+	{ &smfr0	},
+	{ &sw_features	},
 };
 
 static const struct {
 	char	alias[FTR_ALIAS_NAME_LEN];
 	char	feature[FTR_ALIAS_OPTION_LEN];
 } aliases[] __initconst = {
-	{ "kvm-arm.mode=nvhe",		"id_aa64mmfr1.vh=0" },
-	{ "kvm-arm.mode=protected",	"id_aa64mmfr1.vh=0" },
+	{ "kvm_arm.mode=nvhe",		"id_aa64mmfr1.vh=0" },
+	{ "kvm_arm.mode=protected",	"id_aa64mmfr1.vh=0" },
 	{ "arm64.nosve",		"id_aa64pfr0.sve=0" },
 	{ "arm64.nosme",		"id_aa64pfr1.sme=0" },
 	{ "arm64.nobti",		"id_aa64pfr1.bt=0" },
@@ -187,45 +199,61 @@ static const struct {
 	{ "nokaslr",			"arm64_sw.nokaslr=1" },
 };
 
-static int __init parse_nokaslr(char *unused)
+static int __init parse_hexdigit(const char *p, u64 *v)
 {
-	/* nokaslr param handling is done by early cpufeature code */
+	// skip "0x" if it comes next
+	if (p[0] == '0' && tolower(p[1]) == 'x')
+		p += 2;
+
+	// check whether the RHS is a single hex digit
+	if (!isxdigit(p[0]) || (p[1] && !isspace(p[1])))
+		return -EINVAL;
+
+	*v = tolower(*p) - (isdigit(*p) ? '0' : 'a' - 10);
 	return 0;
 }
-early_param("nokaslr", parse_nokaslr);
 
-static int __init find_field(const char *cmdline,
+static int __init find_field(const char *cmdline, char *opt, int len,
 			     const struct ftr_set_desc *reg, int f, u64 *v)
 {
-	char opt[FTR_DESC_NAME_LEN + FTR_DESC_FIELD_LEN + 2];
-	int len;
+	int flen = strlen(reg->fields[f].name);
 
-	len = snprintf(opt, ARRAY_SIZE(opt), "%s.%s=",
-		       reg->name, reg->fields[f].name);
+	// append '<fieldname>=' to obtain '<name>.<fieldname>='
+	memcpy(opt + len, reg->fields[f].name, flen);
+	len += flen;
+	opt[len++] = '=';
 
-	if (!parameqn(cmdline, opt, len))
+	if (memcmp(cmdline, opt, len))
 		return -1;
 
-	return kstrtou64(cmdline + len, 0, v);
+	return parse_hexdigit(cmdline + len, v);
 }
 
 static void __init match_options(const char *cmdline)
 {
+	char opt[FTR_DESC_NAME_LEN + FTR_DESC_FIELD_LEN + 2];
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
+		const struct ftr_set_desc *reg = prel64_pointer(regs[i].reg);
+		struct arm64_ftr_override *override;
+		int len = strlen(reg->name);
 		int f;
 
-		if (!regs[i]->override)
-			continue;
+		override = prel64_pointer(reg->override);
 
-		for (f = 0; strlen(regs[i]->fields[f].name); f++) {
-			u64 shift = regs[i]->fields[f].shift;
-			u64 width = regs[i]->fields[f].width ?: 4;
+		// set opt[] to '<name>.'
+		memcpy(opt, reg->name, len);
+		opt[len++] = '.';
+
+		for (f = 0; reg->fields[f].name[0] != '\0'; f++) {
+			u64 shift = reg->fields[f].shift;
+			u64 width = reg->fields[f].width ?: 4;
 			u64 mask = GENMASK_ULL(shift + width - 1, shift);
+			bool (*filter)(u64 val);
 			u64 v;
 
-			if (find_field(cmdline, regs[i], f, &v))
+			if (find_field(cmdline, opt, len, reg, f, &v))
 				continue;
 
 			/*
@@ -233,16 +261,16 @@ static void __init match_options(const char *cmdline)
 			 * it by setting the value to the all-ones while
 			 * clearing the mask... Yes, this is fragile.
 			 */
-			if (regs[i]->fields[f].filter &&
-			    !regs[i]->fields[f].filter(v)) {
-				regs[i]->override->val  |= mask;
-				regs[i]->override->mask &= ~mask;
+			filter = prel64_pointer(reg->fields[f].filter);
+			if (filter && !filter(v)) {
+				override->val  |= mask;
+				override->mask &= ~mask;
 				continue;
 			}
 
-			regs[i]->override->val  &= ~mask;
-			regs[i]->override->val  |= (v << shift) & mask;
-			regs[i]->override->mask |= mask;
+			override->val  &= ~mask;
+			override->val  |= (v << shift) & mask;
+			override->mask |= mask;
 
 			return;
 		}
@@ -258,23 +286,29 @@ static __init void __parse_cmdline(const char *cmdline, bool parse_aliases)
 
 		cmdline = skip_spaces(cmdline);
 
-		for (len = 0; cmdline[len] && !isspace(cmdline[len]); len++);
-		if (!len)
+		/* terminate on "--" appearing on the command line by itself */
+		if (cmdline[0] == '-' && cmdline[1] == '-' && isspace(cmdline[2]))
 			return;
 
-		len = min(len, ARRAY_SIZE(buf) - 1);
-		memcpy(buf, cmdline, len);
-		buf[len] = '\0';
-
-		if (strcmp(buf, "--") == 0)
+		for (len = 0; cmdline[len] && !isspace(cmdline[len]); len++) {
+			if (len >= sizeof(buf) - 1)
+				break;
+			if (cmdline[len] == '-')
+				buf[len] = '_';
+			else
+				buf[len] = cmdline[len];
+		}
+		if (!len)
 			return;
 
+		buf[len] = 0;
+
 		cmdline += len;
 
 		match_options(buf);
 
 		for (i = 0; parse_aliases && i < ARRAY_SIZE(aliases); i++)
-			if (parameq(buf, aliases[i].alias))
+			if (!memcmp(buf, aliases[i].alias, len + 1))
 				__parse_cmdline(aliases[i].feature, false);
 	} while (1);
 }
@@ -316,13 +350,16 @@ void init_feature_override(u64 boot_status);
 
 asmlinkage void __init init_feature_override(u64 boot_status)
 {
+	struct arm64_ftr_override *override;
+	const struct ftr_set_desc *reg;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
-		if (regs[i]->override) {
-			regs[i]->override->val  = 0;
-			regs[i]->override->mask = 0;
-		}
+		reg = prel64_pointer(regs[i].reg);
+		override = prel64_pointer(reg->override);
+
+		override->val  = 0;
+		override->mask = 0;
 	}
 
 	__boot_status = boot_status;
@@ -330,9 +367,9 @@ asmlinkage void __init init_feature_override(u64 boot_status)
 	parse_cmdline();
 
 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
-		if (regs[i]->override)
-			dcache_clean_inval_poc((unsigned long)regs[i]->override,
-					    (unsigned long)regs[i]->override +
-					    sizeof(*regs[i]->override));
+		reg = prel64_pointer(regs[i].reg);
+		override = prel64_pointer(reg->override);
+		dcache_clean_inval_poc((unsigned long)override,
+				       (unsigned long)(override + 1));
 	}
 }
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/irq.c linux-libre-6.8-gnu/arch/arm64/kernel/irq.c
index 6ad5c6ef5329..85087e2df564 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/irq.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/irq.c
@@ -22,6 +22,7 @@
 #include <linux/vmalloc.h>
 #include <asm/daifflags.h>
 #include <asm/exception.h>
+#include <asm/numa.h>
 #include <asm/softirq_stack.h>
 #include <asm/stacktrace.h>
 #include <asm/vmap_stack.h>
@@ -47,17 +48,17 @@ static void init_irq_scs(void)
 
 	for_each_possible_cpu(cpu)
 		per_cpu(irq_shadow_call_stack_ptr, cpu) =
-			scs_alloc(cpu_to_node(cpu));
+			scs_alloc(early_cpu_to_node(cpu));
 }
 
 #ifdef CONFIG_VMAP_STACK
-static void init_irq_stacks(void)
+static void __init init_irq_stacks(void)
 {
 	int cpu;
 	unsigned long *p;
 
 	for_each_possible_cpu(cpu) {
-		p = arch_alloc_vmap_stack(IRQ_STACK_SIZE, cpu_to_node(cpu));
+		p = arch_alloc_vmap_stack(IRQ_STACK_SIZE, early_cpu_to_node(cpu));
 		per_cpu(irq_stack_ptr, cpu) = p;
 	}
 }
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/kaslr.c linux-libre-6.8-gnu/arch/arm64/kernel/kaslr.c
index 94a269cd1f07..12c7f3c8ba76 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/kaslr.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/kaslr.c
@@ -36,3 +36,10 @@ void __init kaslr_init(void)
 	pr_info("KASLR enabled\n");
 	__kaslr_is_enabled = true;
 }
+
+static int __init parse_nokaslr(char *unused)
+{
+	/* nokaslr param handling is done by early cpufeature code */
+	return 0;
+}
+early_param("nokaslr", parse_nokaslr);
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/kexec_image.c linux-libre-6.8-gnu/arch/arm64/kernel/kexec_image.c
index 636be6715155..532d72ea42ee 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/kexec_image.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/kexec_image.c
@@ -122,9 +122,9 @@ static void *image_load(struct kimage *image,
 	kernel_segment->memsz -= text_offset;
 	image->start = kernel_segment->mem;
 
-	pr_debug("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-				kernel_segment->mem, kbuf.bufsz,
-				kernel_segment->memsz);
+	kexec_dprintk("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      kernel_segment->mem, kbuf.bufsz,
+		      kernel_segment->memsz);
 
 	return NULL;
 }
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/machine_kexec.c linux-libre-6.8-gnu/arch/arm64/kernel/machine_kexec.c
index 078910db77a4..b38aae5b488d 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/machine_kexec.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/machine_kexec.c
@@ -32,26 +32,12 @@
 static void _kexec_image_info(const char *func, int line,
 	const struct kimage *kimage)
 {
-	unsigned long i;
-
-	pr_debug("%s:%d:\n", func, line);
-	pr_debug("  kexec kimage info:\n");
-	pr_debug("    type:        %d\n", kimage->type);
-	pr_debug("    start:       %lx\n", kimage->start);
-	pr_debug("    head:        %lx\n", kimage->head);
-	pr_debug("    nr_segments: %lu\n", kimage->nr_segments);
-	pr_debug("    dtb_mem: %pa\n", &kimage->arch.dtb_mem);
-	pr_debug("    kern_reloc: %pa\n", &kimage->arch.kern_reloc);
-	pr_debug("    el2_vectors: %pa\n", &kimage->arch.el2_vectors);
-
-	for (i = 0; i < kimage->nr_segments; i++) {
-		pr_debug("      segment[%lu]: %016lx - %016lx, 0x%lx bytes, %lu pages\n",
-			i,
-			kimage->segment[i].mem,
-			kimage->segment[i].mem + kimage->segment[i].memsz,
-			kimage->segment[i].memsz,
-			kimage->segment[i].memsz /  PAGE_SIZE);
-	}
+	kexec_dprintk("%s:%d:\n", func, line);
+	kexec_dprintk("  kexec kimage info:\n");
+	kexec_dprintk("    type:        %d\n", kimage->type);
+	kexec_dprintk("    head:        %lx\n", kimage->head);
+	kexec_dprintk("    kern_reloc: %pa\n", &kimage->arch.kern_reloc);
+	kexec_dprintk("    el2_vectors: %pa\n", &kimage->arch.el2_vectors);
 }
 
 void machine_kexec_cleanup(struct kimage *kimage)
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/machine_kexec_file.c linux-libre-6.8-gnu/arch/arm64/kernel/machine_kexec_file.c
index a11a6e14ba89..0e017358f4ba 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/machine_kexec_file.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/machine_kexec_file.c
@@ -127,8 +127,8 @@ int load_other_segments(struct kimage *image,
 		image->elf_load_addr = kbuf.mem;
 		image->elf_headers_sz = headers_sz;
 
-		pr_debug("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-			 image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
+		kexec_dprintk("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
 	}
 
 	/* load initrd */
@@ -148,8 +148,8 @@ int load_other_segments(struct kimage *image,
 			goto out_err;
 		initrd_load_addr = kbuf.mem;
 
-		pr_debug("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-				initrd_load_addr, kbuf.bufsz, kbuf.memsz);
+		kexec_dprintk("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      initrd_load_addr, kbuf.bufsz, kbuf.memsz);
 	}
 
 	/* load dtb */
@@ -179,8 +179,8 @@ int load_other_segments(struct kimage *image,
 	image->arch.dtb = dtb;
 	image->arch.dtb_mem = kbuf.mem;
 
-	pr_debug("Loaded dtb at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-			kbuf.mem, kbuf.bufsz, kbuf.memsz);
+	kexec_dprintk("Loaded dtb at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      kbuf.mem, kbuf.bufsz, kbuf.memsz);
 
 	return 0;
 
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/pi/Makefile linux-libre-6.8-gnu/arch/arm64/kernel/pi/Makefile
index 4c0ea3cd4ea4..c844a0546d7f 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/pi/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/kernel/pi/Makefile
@@ -3,6 +3,7 @@
 
 KBUILD_CFLAGS	:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) -fpie \
 		   -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_STACKLEAK_PLUGIN) \
+		   $(DISABLE_LATENT_ENTROPY_PLUGIN) \
 		   $(call cc-option,-mbranch-protection=none) \
 		   -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
 		   -include $(srctree)/include/linux/hidden.h \
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/ptrace.c linux-libre-6.8-gnu/arch/arm64/kernel/ptrace.c
index 20d7ef82de90..e3bef38fc2e2 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/ptrace.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/ptrace.c
@@ -28,6 +28,7 @@
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
 #include <linux/elf.h>
+#include <linux/rseq.h>
 
 #include <asm/compat.h>
 #include <asm/cpufeature.h>
@@ -1107,12 +1108,13 @@ static int za_set(struct task_struct *target,
 		}
 	}
 
-	/* Allocate/reinit ZA storage */
-	sme_alloc(target, true);
-	if (!target->thread.sme_state) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	/*
+	 * Only flush the storage if PSTATE.ZA was not already set,
+	 * otherwise preserve any existing data.
+	 */
+	sme_alloc(target, !thread_za_enabled(&target->thread));
+	if (!target->thread.sme_state)
+		return -ENOMEM;
 
 	/* If there is no data then disable ZA */
 	if (!count) {
@@ -1498,7 +1500,8 @@ static const struct user_regset aarch64_regsets[] = {
 #ifdef CONFIG_ARM64_SVE
 	[REGSET_SVE] = { /* Scalable Vector Extension */
 		.core_note_type = NT_ARM_SVE,
-		.n = DIV_ROUND_UP(SVE_PT_SIZE(SVE_VQ_MAX, SVE_PT_REGS_SVE),
+		.n = DIV_ROUND_UP(SVE_PT_SIZE(ARCH_SVE_VQ_MAX,
+					      SVE_PT_REGS_SVE),
 				  SVE_VQ_BYTES),
 		.size = SVE_VQ_BYTES,
 		.align = SVE_VQ_BYTES,
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/setup.c linux-libre-6.8-gnu/arch/arm64/kernel/setup.c
index 417a8a86b2db..42c690bb2d60 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/setup.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/setup.c
@@ -402,19 +402,10 @@ static inline bool cpu_can_disable(unsigned int cpu)
 	return false;
 }
 
-static int __init topology_init(void)
+bool arch_cpu_is_hotpluggable(int num)
 {
-	int i;
-
-	for_each_possible_cpu(i) {
-		struct cpu *cpu = &per_cpu(cpu_data.cpu, i);
-		cpu->hotpluggable = cpu_can_disable(i);
-		register_cpu(cpu, i);
-	}
-
-	return 0;
+	return cpu_can_disable(num);
 }
-subsys_initcall(topology_init);
 
 static void dump_kernel_offset(void)
 {
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/signal.c linux-libre-6.8-gnu/arch/arm64/kernel/signal.c
index 0e8beb3349ea..425b1bc17a3f 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/signal.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/signal.c
@@ -242,7 +242,7 @@ static int preserve_sve_context(struct sve_context __user *ctx)
 		vl = task_get_sme_vl(current);
 		vq = sve_vq_from_vl(vl);
 		flags |= SVE_SIG_FLAG_SM;
-	} else if (test_thread_flag(TIF_SVE)) {
+	} else if (current->thread.fp_type == FP_STATE_SVE) {
 		vq = sve_vq_from_vl(vl);
 	}
 
@@ -878,7 +878,7 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
 	if (system_supports_sve() || system_supports_sme()) {
 		unsigned int vq = 0;
 
-		if (add_all || test_thread_flag(TIF_SVE) ||
+		if (add_all || current->thread.fp_type == FP_STATE_SVE ||
 		    thread_sm_enabled(&current->thread)) {
 			int vl = max(sve_max_vl(), sme_max_vl());
 
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/smp.c linux-libre-6.8-gnu/arch/arm64/kernel/smp.c
index defbab84e9e5..4ced34f62dab 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/smp.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/smp.c
@@ -439,9 +439,8 @@ static void __init hyp_mode_check(void)
 void __init smp_cpus_done(unsigned int max_cpus)
 {
 	pr_info("SMP: Total of %d processors activated.\n", num_online_cpus());
-	setup_system_features();
 	hyp_mode_check();
-	apply_alternatives_all();
+	setup_system_features();
 	setup_user_features();
 	mark_linear_text_alias_ro();
 }
@@ -454,14 +453,9 @@ void __init smp_prepare_boot_cpu(void)
 	 * freed shortly, so we must move over to the runtime per-cpu area.
 	 */
 	set_my_cpu_offset(per_cpu_offset(smp_processor_id()));
-	cpuinfo_store_boot_cpu();
 
-	/*
-	 * We now know enough about the boot CPU to apply the
-	 * alternatives that cannot wait until interrupt handling
-	 * and/or scheduling is enabled.
-	 */
-	apply_boot_alternatives();
+	cpuinfo_store_boot_cpu();
+	setup_boot_cpu_features();
 
 	/* Conditionally switch to GIC PMR for interrupt masking */
 	if (system_uses_irq_prio_masking())
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/stacktrace.c linux-libre-6.8-gnu/arch/arm64/kernel/stacktrace.c
index 17f66a74c745..b2a60e0bcfd2 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/stacktrace.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/stacktrace.c
@@ -8,6 +8,7 @@
 #include <linux/efi.h>
 #include <linux/export.h>
 #include <linux/ftrace.h>
+#include <linux/kprobes.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
 #include <linux/sched/task_stack.h>
@@ -18,6 +19,31 @@
 #include <asm/stack_pointer.h>
 #include <asm/stacktrace.h>
 
+/*
+ * Kernel unwind state
+ *
+ * @common:      Common unwind state.
+ * @task:        The task being unwound.
+ * @kr_cur:      When KRETPROBES is selected, holds the kretprobe instance
+ *               associated with the most recently encountered replacement lr
+ *               value.
+ */
+struct kunwind_state {
+	struct unwind_state common;
+	struct task_struct *task;
+#ifdef CONFIG_KRETPROBES
+	struct llist_node *kr_cur;
+#endif
+};
+
+static __always_inline void
+kunwind_init(struct kunwind_state *state,
+	     struct task_struct *task)
+{
+	unwind_init_common(&state->common);
+	state->task = task;
+}
+
 /*
  * Start an unwind from a pt_regs.
  *
@@ -26,13 +52,13 @@
  * The regs must be on a stack currently owned by the calling task.
  */
 static __always_inline void
-unwind_init_from_regs(struct unwind_state *state,
-		      struct pt_regs *regs)
+kunwind_init_from_regs(struct kunwind_state *state,
+		       struct pt_regs *regs)
 {
-	unwind_init_common(state, current);
+	kunwind_init(state, current);
 
-	state->fp = regs->regs[29];
-	state->pc = regs->pc;
+	state->common.fp = regs->regs[29];
+	state->common.pc = regs->pc;
 }
 
 /*
@@ -44,12 +70,12 @@ unwind_init_from_regs(struct unwind_state *state,
  * The function which invokes this must be noinline.
  */
 static __always_inline void
-unwind_init_from_caller(struct unwind_state *state)
+kunwind_init_from_caller(struct kunwind_state *state)
 {
-	unwind_init_common(state, current);
+	kunwind_init(state, current);
 
-	state->fp = (unsigned long)__builtin_frame_address(1);
-	state->pc = (unsigned long)__builtin_return_address(0);
+	state->common.fp = (unsigned long)__builtin_frame_address(1);
+	state->common.pc = (unsigned long)__builtin_return_address(0);
 }
 
 /*
@@ -63,35 +89,38 @@ unwind_init_from_caller(struct unwind_state *state)
  * call this for the current task.
  */
 static __always_inline void
-unwind_init_from_task(struct unwind_state *state,
-		      struct task_struct *task)
+kunwind_init_from_task(struct kunwind_state *state,
+		       struct task_struct *task)
 {
-	unwind_init_common(state, task);
+	kunwind_init(state, task);
 
-	state->fp = thread_saved_fp(task);
-	state->pc = thread_saved_pc(task);
+	state->common.fp = thread_saved_fp(task);
+	state->common.pc = thread_saved_pc(task);
 }
 
 static __always_inline int
-unwind_recover_return_address(struct unwind_state *state)
+kunwind_recover_return_address(struct kunwind_state *state)
 {
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	if (state->task->ret_stack &&
-	    (state->pc == (unsigned long)return_to_handler)) {
+	    (state->common.pc == (unsigned long)return_to_handler)) {
 		unsigned long orig_pc;
-		orig_pc = ftrace_graph_ret_addr(state->task, NULL, state->pc,
-						(void *)state->fp);
-		if (WARN_ON_ONCE(state->pc == orig_pc))
+		orig_pc = ftrace_graph_ret_addr(state->task, NULL,
+						state->common.pc,
+						(void *)state->common.fp);
+		if (WARN_ON_ONCE(state->common.pc == orig_pc))
 			return -EINVAL;
-		state->pc = orig_pc;
+		state->common.pc = orig_pc;
 	}
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
 #ifdef CONFIG_KRETPROBES
-	if (is_kretprobe_trampoline(state->pc)) {
-		state->pc = kretprobe_find_ret_addr(state->task,
-						    (void *)state->fp,
-						    &state->kr_cur);
+	if (is_kretprobe_trampoline(state->common.pc)) {
+		unsigned long orig_pc;
+		orig_pc = kretprobe_find_ret_addr(state->task,
+						  (void *)state->common.fp,
+						  &state->kr_cur);
+		state->common.pc = orig_pc;
 	}
 #endif /* CONFIG_KRETPROBES */
 
@@ -106,38 +135,40 @@ unwind_recover_return_address(struct unwind_state *state)
  * and the location (but not the fp value) of B.
  */
 static __always_inline int
-unwind_next(struct unwind_state *state)
+kunwind_next(struct kunwind_state *state)
 {
 	struct task_struct *tsk = state->task;
-	unsigned long fp = state->fp;
+	unsigned long fp = state->common.fp;
 	int err;
 
 	/* Final frame; nothing to unwind */
 	if (fp == (unsigned long)task_pt_regs(tsk)->stackframe)
 		return -ENOENT;
 
-	err = unwind_next_frame_record(state);
+	err = unwind_next_frame_record(&state->common);
 	if (err)
 		return err;
 
-	state->pc = ptrauth_strip_kernel_insn_pac(state->pc);
+	state->common.pc = ptrauth_strip_kernel_insn_pac(state->common.pc);
 
-	return unwind_recover_return_address(state);
+	return kunwind_recover_return_address(state);
 }
 
+typedef bool (*kunwind_consume_fn)(const struct kunwind_state *state, void *cookie);
+
 static __always_inline void
-unwind(struct unwind_state *state, stack_trace_consume_fn consume_entry,
-       void *cookie)
+do_kunwind(struct kunwind_state *state, kunwind_consume_fn consume_state,
+	   void *cookie)
 {
-	if (unwind_recover_return_address(state))
+	if (kunwind_recover_return_address(state))
 		return;
 
 	while (1) {
 		int ret;
 
-		if (!consume_entry(cookie, state->pc))
+		if (!consume_state(state, cookie))
 			break;
-		ret = unwind_next(state);
+		ret = kunwind_next(state);
 		if (ret < 0)
 			break;
 	}
@@ -172,9 +203,10 @@ unwind(struct unwind_state *state, stack_trace_consume_fn consume_entry,
 			: stackinfo_get_unknown();		\
 	})
 
-noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
-			      void *cookie, struct task_struct *task,
-			      struct pt_regs *regs)
+static __always_inline void
+kunwind_stack_walk(kunwind_consume_fn consume_state,
+		   void *cookie, struct task_struct *task,
+		   struct pt_regs *regs)
 {
 	struct stack_info stacks[] = {
 		stackinfo_get_task(task),
@@ -190,22 +222,48 @@ noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
 		STACKINFO_EFI,
 #endif
 	};
-	struct unwind_state state = {
-		.stacks = stacks,
-		.nr_stacks = ARRAY_SIZE(stacks),
+	struct kunwind_state state = {
+		.common = {
+			.stacks = stacks,
+			.nr_stacks = ARRAY_SIZE(stacks),
+		},
 	};
 
 	if (regs) {
 		if (task != current)
 			return;
-		unwind_init_from_regs(&state, regs);
+		kunwind_init_from_regs(&state, regs);
 	} else if (task == current) {
-		unwind_init_from_caller(&state);
+		kunwind_init_from_caller(&state);
 	} else {
-		unwind_init_from_task(&state, task);
+		kunwind_init_from_task(&state, task);
 	}
 
-	unwind(&state, consume_entry, cookie);
+	do_kunwind(&state, consume_state, cookie);
+}
+
+struct kunwind_consume_entry_data {
+	stack_trace_consume_fn consume_entry;
+	void *cookie;
+};
+
+static __always_inline bool
+arch_kunwind_consume_entry(const struct kunwind_state *state, void *cookie)
+{
+	struct kunwind_consume_entry_data *data = cookie;
+	return data->consume_entry(data->cookie, state->common.pc);
+}
+
+noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
+			      void *cookie, struct task_struct *task,
+			      struct pt_regs *regs)
+{
+	struct kunwind_consume_entry_data data = {
+		.consume_entry = consume_entry,
+		.cookie = cookie,
+	};
+
+	kunwind_stack_walk(arch_kunwind_consume_entry, &data, task, regs);
 }
 
 static bool dump_backtrace_entry(void *arg, unsigned long where)
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/suspend.c linux-libre-6.8-gnu/arch/arm64/kernel/suspend.c
index eca4d0435211..eaaff94329cd 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/suspend.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/suspend.c
@@ -12,6 +12,7 @@
 #include <asm/daifflags.h>
 #include <asm/debug-monitors.h>
 #include <asm/exec.h>
+#include <asm/fpsimd.h>
 #include <asm/mte.h>
 #include <asm/memory.h>
 #include <asm/mmu_context.h>
@@ -80,6 +81,8 @@ void notrace __cpu_suspend_exit(void)
 	 */
 	spectre_v4_enable_mitigation(NULL);
 
+	sme_suspend_exit();
+
 	/* Restore additional feature-specific configuration */
 	ptrauth_suspend_exit();
 }
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/topology.c linux-libre-6.8-gnu/arch/arm64/kernel/topology.c
index 817d788cd866..1a2c72f3e7f8 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/topology.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/topology.c
@@ -82,7 +82,12 @@ int __init parse_acpi_topology(void)
 #undef pr_fmt
 #define pr_fmt(fmt) "AMU: " fmt
 
-static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, arch_max_freq_scale);
+/*
+ * Ensure that amu_scale_freq_tick() will return SCHED_CAPACITY_SCALE until
+ * the CPU capacity and its associated frequency have been correctly
+ * initialized.
+ */
+static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, arch_max_freq_scale) =  1UL << (2 * SCHED_CAPACITY_SHIFT);
 static DEFINE_PER_CPU(u64, arch_const_cycles_prev);
 static DEFINE_PER_CPU(u64, arch_core_cycles_prev);
 static cpumask_var_t amu_fie_cpus;
@@ -112,14 +117,14 @@ static inline bool freq_counters_valid(int cpu)
 	return true;
 }
 
-static int freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate)
+void freq_inv_set_max_ratio(int cpu, u64 max_rate)
 {
-	u64 ratio;
+	u64 ratio, ref_rate = arch_timer_get_rate();
 
 	if (unlikely(!max_rate || !ref_rate)) {
-		pr_debug("CPU%d: invalid maximum or reference frequency.\n",
+		WARN_ONCE(1, "CPU%d: invalid maximum or reference frequency.\n",
 			 cpu);
-		return -EINVAL;
+		return;
 	}
 
 	/*
@@ -139,12 +144,10 @@ static int freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate)
 	ratio = div64_u64(ratio, max_rate);
 	if (!ratio) {
 		WARN_ONCE(1, "Reference frequency too low.\n");
-		return -EINVAL;
+		return;
 	}
 
-	per_cpu(arch_max_freq_scale, cpu) = (unsigned long)ratio;
-
-	return 0;
+	WRITE_ONCE(per_cpu(arch_max_freq_scale, cpu), (unsigned long)ratio);
 }
 
 static void amu_scale_freq_tick(void)
@@ -195,10 +198,7 @@ static void amu_fie_setup(const struct cpumask *cpus)
 		return;
 
 	for_each_cpu(cpu, cpus) {
-		if (!freq_counters_valid(cpu) ||
-		    freq_inv_set_max_ratio(cpu,
-					   cpufreq_get_hw_max_freq(cpu) * 1000ULL,
-					   arch_timer_get_rate()))
+		if (!freq_counters_valid(cpu))
 			return;
 	}
 
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/vdso32/Makefile linux-libre-6.8-gnu/arch/arm64/kernel/vdso32/Makefile
index 1f911a76c5af..f5f80fdce0fe 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/vdso32/Makefile
+++ linux-libre-6.8-gnu/arch/arm64/kernel/vdso32/Makefile
@@ -118,7 +118,7 @@ endif
 VDSO_CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os
 
 # Build rules
-targets := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso) vdso.so vdso.so.dbg vdso.so.raw
+targets := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso) vdso.so vdso32.so.dbg vdso.so.raw
 c-obj-vdso := $(addprefix $(obj)/, $(c-obj-vdso))
 c-obj-vdso-gettimeofday := $(addprefix $(obj)/, $(c-obj-vdso-gettimeofday))
 asm-obj-vdso := $(addprefix $(obj)/, $(asm-obj-vdso))
@@ -127,15 +127,12 @@ obj-vdso := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso)
 targets += vdso.lds
 CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
 
-include/generated/vdso32-offsets.h: $(obj)/vdso.so.dbg FORCE
-	$(call if_changed,vdsosym)
-
 # Strip rule for vdso.so
 $(obj)/vdso.so: OBJCOPYFLAGS := -S
-$(obj)/vdso.so: $(obj)/vdso.so.dbg FORCE
+$(obj)/vdso.so: $(obj)/vdso32.so.dbg FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/vdso.so.dbg: $(obj)/vdso.so.raw $(obj)/$(munge) FORCE
+$(obj)/vdso32.so.dbg: $(obj)/vdso.so.raw $(obj)/$(munge) FORCE
 	$(call if_changed,vdsomunge)
 
 # Link rule for the .so file, .lds has to be first
@@ -166,9 +163,3 @@ quiet_cmd_vdsoas = AS32    $@
 
 quiet_cmd_vdsomunge = MUNGE   $@
       cmd_vdsomunge = $(obj)/$(munge) $< $@
-
-# Generate vDSO offsets using helper script (borrowed from the 64-bit vDSO)
-gen-vdsosym := $(srctree)/$(src)/../vdso/gen_vdso_offsets.sh
-quiet_cmd_vdsosym = VDSOSYM $@
-# The AArch64 nm should be able to read an AArch32 binary
-      cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
diff --git linux-libre-6.7-gnu/arch/arm64/kernel/vdso32/vgettimeofday.c linux-libre-6.8-gnu/arch/arm64/kernel/vdso32/vgettimeofday.c
index 5acff29c5991..29b4d8f61e39 100644
--- linux-libre-6.7-gnu/arch/arm64/kernel/vdso32/vgettimeofday.c
+++ linux-libre-6.8-gnu/arch/arm64/kernel/vdso32/vgettimeofday.c
@@ -5,6 +5,8 @@
  * Copyright (C) 2018 ARM Limited
  *
  */
+#define BUILD_VDSO32_64
+#include <vdso/gettime.h>
 
 int __vdso_clock_gettime(clockid_t clock,
 			 struct old_timespec32 *ts)
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/Kconfig linux-libre-6.8-gnu/arch/arm64/kvm/Kconfig
index 83c1e09be42e..27ca89b628a0 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/Kconfig
+++ linux-libre-6.8-gnu/arch/arm64/kvm/Kconfig
@@ -3,7 +3,6 @@
 # KVM configuration
 #
 
-source "virt/lib/Kconfig"
 source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
@@ -21,16 +20,14 @@ if VIRTUALIZATION
 menuconfig KVM
 	bool "Kernel-based Virtual Machine (KVM) support"
 	depends on HAVE_KVM
+	select KVM_COMMON
 	select KVM_GENERIC_HARDWARE_ENABLING
-	select MMU_NOTIFIER
-	select PREEMPT_NOTIFIERS
+	select KVM_GENERIC_MMU_NOTIFIER
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select KVM_MMIO
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
 	select KVM_XFER_TO_GUEST_WORK
 	select KVM_VFIO
-	select HAVE_KVM_EVENTFD
-	select HAVE_KVM_IRQFD
 	select HAVE_KVM_DIRTY_RING_ACQ_REL
 	select NEED_KVM_DIRTY_RING_WITH_BITMAP
 	select HAVE_KVM_MSI
@@ -41,7 +38,6 @@ menuconfig KVM
 	select HAVE_KVM_VCPU_RUN_PID_CHANGE
 	select SCHED_INFO
 	select GUEST_PERF_EVENTS if PERF_EVENTS
-	select INTERVAL_TREE
 	select XARRAY_MULTI
 	help
 	  Support hosting virtualized guest machines.
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/arch_timer.c linux-libre-6.8-gnu/arch/arm64/kvm/arch_timer.c
index 13ba691b848f..9dec8c419bf4 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/arch_timer.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/arch_timer.c
@@ -295,8 +295,7 @@ static u64 wfit_delay_ns(struct kvm_vcpu *vcpu)
 	u64 val = vcpu_get_reg(vcpu, kvm_vcpu_sys_get_rt(vcpu));
 	struct arch_timer_context *ctx;
 
-	ctx = (vcpu_has_nv(vcpu) && is_hyp_ctxt(vcpu)) ? vcpu_hvtimer(vcpu)
-						       : vcpu_vtimer(vcpu);
+	ctx = is_hyp_ctxt(vcpu) ? vcpu_hvtimer(vcpu) : vcpu_vtimer(vcpu);
 
 	return kvm_counter_compute_delta(ctx, val);
 }
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/arm.c linux-libre-6.8-gnu/arch/arm64/kvm/arm.c
index 4796104c4471..a25265aca432 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/arm.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/arm.c
@@ -221,7 +221,6 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = vgic_present;
 		break;
 	case KVM_CAP_IOEVENTFD:
-	case KVM_CAP_DEVICE_CTRL:
 	case KVM_CAP_USER_MEMORY:
 	case KVM_CAP_SYNC_MMU:
 	case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
@@ -669,6 +668,12 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
 			return ret;
 	}
 
+	if (vcpu_has_nv(vcpu)) {
+		ret = kvm_init_nv_sysregs(vcpu->kvm);
+		if (ret)
+			return ret;
+	}
+
 	ret = kvm_timer_enable(vcpu);
 	if (ret)
 		return ret;
@@ -1837,6 +1842,7 @@ static int kvm_init_vector_slots(void)
 static void __init cpu_prepare_hyp_mode(int cpu, u32 hyp_va_bits)
 {
 	struct kvm_nvhe_init_params *params = per_cpu_ptr_nvhe_sym(kvm_init_params, cpu);
+	u64 mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
 	unsigned long tcr;
 
 	/*
@@ -1859,6 +1865,10 @@ static void __init cpu_prepare_hyp_mode(int cpu, u32 hyp_va_bits)
 	}
 	tcr &= ~TCR_T0SZ_MASK;
 	tcr |= TCR_T0SZ(hyp_va_bits);
+	tcr &= ~TCR_EL2_PS_MASK;
+	tcr |= FIELD_PREP(TCR_EL2_PS_MASK, kvm_get_parange(mmfr0));
+	if (kvm_lpa2_is_enabled())
+		tcr |= TCR_EL2_DS;
 	params->tcr_el2 = tcr;
 
 	params->pgd_pa = kvm_mmu_get_httbr();
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/emulate-nested.c linux-libre-6.8-gnu/arch/arm64/kvm/emulate-nested.c
index 06185216a297..431fd429932d 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/emulate-nested.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/emulate-nested.c
@@ -1012,6 +1012,7 @@ enum fgt_group_id {
 	HDFGRTR_GROUP,
 	HDFGWTR_GROUP,
 	HFGITR_GROUP,
+	HAFGRTR_GROUP,
 
 	/* Must be last */
 	__NR_FGT_GROUP_IDS__
@@ -1042,10 +1043,20 @@ enum fg_filter_id {
 
 static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	/* HFGRTR_EL2, HFGWTR_EL2 */
+	SR_FGT(SYS_AMAIR2_EL1,		HFGxTR, nAMAIR2_EL1, 0),
+	SR_FGT(SYS_MAIR2_EL1,		HFGxTR, nMAIR2_EL1, 0),
+	SR_FGT(SYS_S2POR_EL1,		HFGxTR, nS2POR_EL1, 0),
+	SR_FGT(SYS_POR_EL1,		HFGxTR, nPOR_EL1, 0),
+	SR_FGT(SYS_POR_EL0,		HFGxTR, nPOR_EL0, 0),
 	SR_FGT(SYS_PIR_EL1,		HFGxTR, nPIR_EL1, 0),
 	SR_FGT(SYS_PIRE0_EL1,		HFGxTR, nPIRE0_EL1, 0),
+	SR_FGT(SYS_RCWMASK_EL1,		HFGxTR, nRCWMASK_EL1, 0),
 	SR_FGT(SYS_TPIDR2_EL0,		HFGxTR, nTPIDR2_EL0, 0),
 	SR_FGT(SYS_SMPRI_EL1,		HFGxTR, nSMPRI_EL1, 0),
+	SR_FGT(SYS_GCSCR_EL1,		HFGxTR, nGCS_EL1, 0),
+	SR_FGT(SYS_GCSPR_EL1,		HFGxTR, nGCS_EL1, 0),
+	SR_FGT(SYS_GCSCRE0_EL1,		HFGxTR, nGCS_EL0, 0),
+	SR_FGT(SYS_GCSPR_EL0,		HFGxTR, nGCS_EL0, 0),
 	SR_FGT(SYS_ACCDATA_EL1,		HFGxTR, nACCDATA_EL1, 0),
 	SR_FGT(SYS_ERXADDR_EL1,		HFGxTR, ERXADDR_EL1, 1),
 	SR_FGT(SYS_ERXPFGCDN_EL1,	HFGxTR, ERXPFGCDN_EL1, 1),
@@ -1107,6 +1118,11 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_AFSR1_EL1, 		HFGxTR, AFSR1_EL1, 1),
 	SR_FGT(SYS_AFSR0_EL1, 		HFGxTR, AFSR0_EL1, 1),
 	/* HFGITR_EL2 */
+	SR_FGT(OP_AT_S1E1A, 		HFGITR, ATS1E1A, 1),
+	SR_FGT(OP_COSP_RCTX, 		HFGITR, COSPRCTX, 1),
+	SR_FGT(OP_GCSPUSHX, 		HFGITR, nGCSEPP, 0),
+	SR_FGT(OP_GCSPOPX, 		HFGITR, nGCSEPP, 0),
+	SR_FGT(OP_GCSPUSHM, 		HFGITR, nGCSPUSHM_EL1, 0),
 	SR_FGT(OP_BRB_IALL, 		HFGITR, nBRBIALL, 0),
 	SR_FGT(OP_BRB_INJ, 		HFGITR, nBRBINJ, 0),
 	SR_FGT(SYS_DC_CVAC, 		HFGITR, DCCVAC, 1),
@@ -1674,6 +1690,49 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_PMCR_EL0,		HDFGWTR, PMCR_EL0, 1),
 	SR_FGT(SYS_PMSWINC_EL0,		HDFGWTR, PMSWINC_EL0, 1),
 	SR_FGT(SYS_OSLAR_EL1,		HDFGWTR, OSLAR_EL1, 1),
+	/*
+	 * HAFGRTR_EL2
+	 */
+	SR_FGT(SYS_AMEVTYPER1_EL0(15),	HAFGRTR, AMEVTYPER115_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(14),	HAFGRTR, AMEVTYPER114_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(13),	HAFGRTR, AMEVTYPER113_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(12),	HAFGRTR, AMEVTYPER112_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(11),	HAFGRTR, AMEVTYPER111_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(10),	HAFGRTR, AMEVTYPER110_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(9),	HAFGRTR, AMEVTYPER19_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(8),	HAFGRTR, AMEVTYPER18_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(7),	HAFGRTR, AMEVTYPER17_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(6),	HAFGRTR, AMEVTYPER16_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(5),	HAFGRTR, AMEVTYPER15_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(4),	HAFGRTR, AMEVTYPER14_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(3),	HAFGRTR, AMEVTYPER13_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(2),	HAFGRTR, AMEVTYPER12_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(1),	HAFGRTR, AMEVTYPER11_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(0),	HAFGRTR, AMEVTYPER10_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(15),	HAFGRTR, AMEVCNTR115_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(14),	HAFGRTR, AMEVCNTR114_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(13),	HAFGRTR, AMEVCNTR113_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(12),	HAFGRTR, AMEVCNTR112_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(11),	HAFGRTR, AMEVCNTR111_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(10),	HAFGRTR, AMEVCNTR110_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(9),	HAFGRTR, AMEVCNTR19_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(8),	HAFGRTR, AMEVCNTR18_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(7),	HAFGRTR, AMEVCNTR17_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(6),	HAFGRTR, AMEVCNTR16_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(5),	HAFGRTR, AMEVCNTR15_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(4),	HAFGRTR, AMEVCNTR14_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(3),	HAFGRTR, AMEVCNTR13_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(2),	HAFGRTR, AMEVCNTR12_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(1),	HAFGRTR, AMEVCNTR11_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(0),	HAFGRTR, AMEVCNTR10_EL0, 1),
+	SR_FGT(SYS_AMCNTENCLR1_EL0,	HAFGRTR, AMCNTEN1, 1),
+	SR_FGT(SYS_AMCNTENSET1_EL0,	HAFGRTR, AMCNTEN1, 1),
+	SR_FGT(SYS_AMCNTENCLR0_EL0,	HAFGRTR, AMCNTEN0, 1),
+	SR_FGT(SYS_AMCNTENSET0_EL0,	HAFGRTR, AMCNTEN0, 1),
+	SR_FGT(SYS_AMEVCNTR0_EL0(3),	HAFGRTR, AMEVCNTR03_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR0_EL0(2),	HAFGRTR, AMEVCNTR02_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR0_EL0(1),	HAFGRTR, AMEVCNTR01_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR0_EL0(0),	HAFGRTR, AMEVCNTR00_EL0, 1),
 };
 
 static union trap_config get_trap_config(u32 sysreg)
@@ -1894,6 +1953,10 @@ bool __check_nv_sr_forward(struct kvm_vcpu *vcpu)
 			val = sanitised_sys_reg(vcpu, HDFGWTR_EL2);
 		break;
 
+	case HAFGRTR_GROUP:
+		val = sanitised_sys_reg(vcpu, HAFGRTR_EL2);
+		break;
+
 	case HFGITR_GROUP:
 		val = sanitised_sys_reg(vcpu, HFGITR_EL2);
 		switch (tc.fgf) {
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/hyp/include/hyp/fault.h linux-libre-6.8-gnu/arch/arm64/kvm/hyp/include/hyp/fault.h
index 9ddcfe2c3e57..9e13c1bc2ad5 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/hyp/include/hyp/fault.h
+++ linux-libre-6.8-gnu/arch/arm64/kvm/hyp/include/hyp/fault.h
@@ -60,7 +60,7 @@ static inline bool __get_fault_info(u64 esr, struct kvm_vcpu_fault_info *fault)
 	 */
 	if (!(esr & ESR_ELx_S1PTW) &&
 	    (cpus_have_final_cap(ARM64_WORKAROUND_834220) ||
-	     (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_PERM)) {
+	     esr_fsc_is_permission_fault(esr))) {
 		if (!__translate_far_to_hpfar(far, &hpfar))
 			return false;
 	} else {
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/hyp/include/hyp/switch.h linux-libre-6.8-gnu/arch/arm64/kvm/hyp/include/hyp/switch.h
index f99d8af0b9af..a038320cdb08 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/hyp/include/hyp/switch.h
+++ linux-libre-6.8-gnu/arch/arm64/kvm/hyp/include/hyp/switch.h
@@ -79,6 +79,45 @@ static inline void __activate_traps_fpsimd32(struct kvm_vcpu *vcpu)
 		clr |= ~hfg & __ ## reg ## _nMASK; 			\
 	} while(0)
 
+#define update_fgt_traps_cs(vcpu, reg, clr, set)			\
+	do {								\
+		struct kvm_cpu_context *hctxt =				\
+			&this_cpu_ptr(&kvm_host_data)->host_ctxt;	\
+		u64 c = 0, s = 0;					\
+									\
+		ctxt_sys_reg(hctxt, reg) = read_sysreg_s(SYS_ ## reg);	\
+		compute_clr_set(vcpu, reg, c, s);			\
+		s |= set;						\
+		c |= clr;						\
+		if (c || s) {						\
+			u64 val = __ ## reg ## _nMASK;			\
+			val |= s;					\
+			val &= ~c;					\
+			write_sysreg_s(val, SYS_ ## reg);		\
+		}							\
+	} while(0)
+
+#define update_fgt_traps(vcpu, reg)		\
+	update_fgt_traps_cs(vcpu, reg, 0, 0)
+
+/*
+ * Validate the fine grain trap masks.
+ * Check that the masks do not overlap and that all bits are accounted for.
+ */
+#define CHECK_FGT_MASKS(reg)							\
+	do {									\
+		BUILD_BUG_ON((__ ## reg ## _MASK) & (__ ## reg ## _nMASK));	\
+		BUILD_BUG_ON(~((__ ## reg ## _RES0) ^ (__ ## reg ## _MASK) ^	\
+			       (__ ## reg ## _nMASK)));				\
+	} while(0)
+
+static inline bool cpu_has_amu(void)
+{
+       u64 pfr0 = read_sysreg_s(SYS_ID_AA64PFR0_EL1);
+
+       return cpuid_feature_extract_unsigned_field(pfr0,
+               ID_AA64PFR0_EL1_AMU_SHIFT);
+}
 
 static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 {
@@ -86,6 +125,14 @@ static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 	u64 r_clr = 0, w_clr = 0, r_set = 0, w_set = 0, tmp;
 	u64 r_val, w_val;
 
+	CHECK_FGT_MASKS(HFGRTR_EL2);
+	CHECK_FGT_MASKS(HFGWTR_EL2);
+	CHECK_FGT_MASKS(HFGITR_EL2);
+	CHECK_FGT_MASKS(HDFGRTR_EL2);
+	CHECK_FGT_MASKS(HDFGWTR_EL2);
+	CHECK_FGT_MASKS(HAFGRTR_EL2);
+	CHECK_FGT_MASKS(HCRX_EL2);
+
 	if (!cpus_have_final_cap(ARM64_HAS_FGT))
 		return;
 
@@ -110,12 +157,15 @@ static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 		compute_clr_set(vcpu, HFGWTR_EL2, w_clr, w_set);
 	}
 
-	/* The default is not to trap anything but ACCDATA_EL1 */
-	r_val = __HFGRTR_EL2_nMASK & ~HFGxTR_EL2_nACCDATA_EL1;
+	/* The default to trap everything not handled or supported in KVM. */
+	tmp = HFGxTR_EL2_nAMAIR2_EL1 | HFGxTR_EL2_nMAIR2_EL1 | HFGxTR_EL2_nS2POR_EL1 |
+	      HFGxTR_EL2_nPOR_EL1 | HFGxTR_EL2_nPOR_EL0 | HFGxTR_EL2_nACCDATA_EL1;
+
+	r_val = __HFGRTR_EL2_nMASK & ~tmp;
 	r_val |= r_set;
 	r_val &= ~r_clr;
 
-	w_val = __HFGWTR_EL2_nMASK & ~HFGxTR_EL2_nACCDATA_EL1;
+	w_val = __HFGWTR_EL2_nMASK & ~tmp;
 	w_val |= w_set;
 	w_val &= ~w_clr;
 
@@ -125,34 +175,12 @@ static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 	if (!vcpu_has_nv(vcpu) || is_hyp_ctxt(vcpu))
 		return;
 
-	ctxt_sys_reg(hctxt, HFGITR_EL2) = read_sysreg_s(SYS_HFGITR_EL2);
+	update_fgt_traps(vcpu, HFGITR_EL2);
+	update_fgt_traps(vcpu, HDFGRTR_EL2);
+	update_fgt_traps(vcpu, HDFGWTR_EL2);
 
-	r_set = r_clr = 0;
-	compute_clr_set(vcpu, HFGITR_EL2, r_clr, r_set);
-	r_val = __HFGITR_EL2_nMASK;
-	r_val |= r_set;
-	r_val &= ~r_clr;
-
-	write_sysreg_s(r_val, SYS_HFGITR_EL2);
-
-	ctxt_sys_reg(hctxt, HDFGRTR_EL2) = read_sysreg_s(SYS_HDFGRTR_EL2);
-	ctxt_sys_reg(hctxt, HDFGWTR_EL2) = read_sysreg_s(SYS_HDFGWTR_EL2);
-
-	r_clr = r_set = w_clr = w_set = 0;
-
-	compute_clr_set(vcpu, HDFGRTR_EL2, r_clr, r_set);
-	compute_clr_set(vcpu, HDFGWTR_EL2, w_clr, w_set);
-
-	r_val = __HDFGRTR_EL2_nMASK;
-	r_val |= r_set;
-	r_val &= ~r_clr;
-
-	w_val = __HDFGWTR_EL2_nMASK;
-	w_val |= w_set;
-	w_val &= ~w_clr;
-
-	write_sysreg_s(r_val, SYS_HDFGRTR_EL2);
-	write_sysreg_s(w_val, SYS_HDFGWTR_EL2);
+	if (cpu_has_amu())
+		update_fgt_traps(vcpu, HAFGRTR_EL2);
 }
 
 static inline void __deactivate_traps_hfgxtr(struct kvm_vcpu *vcpu)
@@ -171,6 +199,9 @@ static inline void __deactivate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 	write_sysreg_s(ctxt_sys_reg(hctxt, HFGITR_EL2), SYS_HFGITR_EL2);
 	write_sysreg_s(ctxt_sys_reg(hctxt, HDFGRTR_EL2), SYS_HDFGRTR_EL2);
 	write_sysreg_s(ctxt_sys_reg(hctxt, HDFGWTR_EL2), SYS_HDFGWTR_EL2);
+
+	if (cpu_has_amu())
+		write_sysreg_s(ctxt_sys_reg(hctxt, HAFGRTR_EL2), SYS_HAFGRTR_EL2);
 }
 
 static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
@@ -591,7 +622,7 @@ static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
 	if (static_branch_unlikely(&vgic_v2_cpuif_trap)) {
 		bool valid;
 
-		valid = kvm_vcpu_trap_get_fault_type(vcpu) == ESR_ELx_FSC_FAULT &&
+		valid = kvm_vcpu_trap_is_translation_fault(vcpu) &&
 			kvm_vcpu_dabt_isvalid(vcpu) &&
 			!kvm_vcpu_abt_issea(vcpu) &&
 			!kvm_vcpu_abt_iss1tw(vcpu);
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h linux-libre-6.8-gnu/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
index e91922daa8ca..51f043649146 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
+++ linux-libre-6.8-gnu/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
@@ -69,6 +69,8 @@
 	ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_SSBS) \
 	)
 
+#define PVM_ID_AA64PFR2_ALLOW 0ULL
+
 /*
  * Allow for protected VMs:
  * - Mixed-endian
@@ -101,6 +103,7 @@
  * - Privileged Access Never
  * - SError interrupt exceptions from speculative reads
  * - Enhanced Translation Synchronization
+ * - Control for cache maintenance permission
  */
 #define PVM_ID_AA64MMFR1_ALLOW (\
 	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HAFDBS) | \
@@ -108,7 +111,8 @@
 	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HPDS) | \
 	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_PAN) | \
 	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_SpecSEI) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_ETS) \
+	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_ETS) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_CMOW) \
 	)
 
 /*
@@ -133,6 +137,8 @@
 	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_E0PD) \
 	)
 
+#define PVM_ID_AA64MMFR3_ALLOW (0ULL)
+
 /*
  * No support for Scalable Vectors for protected VMs:
  *	Requires additional support from KVM, e.g., context-switching and
@@ -178,10 +184,18 @@
 	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_RNDR) \
 	)
 
+/* Restrict pointer authentication to the basic version. */
+#define PVM_ID_AA64ISAR1_RESTRICT_UNSIGNED (\
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA), ID_AA64ISAR1_EL1_APA_PAuth) | \
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API), ID_AA64ISAR1_EL1_API_PAuth) \
+	)
+
+#define PVM_ID_AA64ISAR2_RESTRICT_UNSIGNED (\
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3), ID_AA64ISAR2_EL1_APA3_PAuth) \
+	)
+
 #define PVM_ID_AA64ISAR1_ALLOW (\
 	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_DPB) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API) | \
 	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_JSCVT) | \
 	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_FCMA) | \
 	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_LRCPC) | \
@@ -196,8 +210,8 @@
 	)
 
 #define PVM_ID_AA64ISAR2_ALLOW (\
+	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_ATS1A)| \
 	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) | \
 	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_MOPS) \
 	)
 
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/hyp/include/nvhe/gfp.h linux-libre-6.8-gnu/arch/arm64/kvm/hyp/include/nvhe/gfp.h
index fe5472a184a3..97c527ef53c2 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/hyp/include/nvhe/gfp.h
+++ linux-libre-6.8-gnu/arch/arm64/kvm/hyp/include/nvhe/gfp.h
@@ -16,7 +16,7 @@ struct hyp_pool {
 	 * API at EL2.
 	 */
 	hyp_spinlock_t lock;
-	struct list_head free_area[MAX_ORDER + 1];
+	struct list_head free_area[NR_PAGE_ORDERS];
 	phys_addr_t range_start;
 	phys_addr_t range_end;
 	unsigned short max_order;
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/hyp-init.S linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/hyp-init.S
index 1cc06e6797bd..2994878d68ea 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/hyp-init.S
+++ linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/hyp-init.S
@@ -122,11 +122,7 @@ alternative_if ARM64_HAS_CNP
 alternative_else_nop_endif
 	msr	ttbr0_el2, x2
 
-	/*
-	 * Set the PS bits in TCR_EL2.
-	 */
 	ldr	x0, [x0, #NVHE_INIT_TCR_EL2]
-	tcr_compute_pa_size x0, #TCR_EL2_PS_SHIFT, x1, x2
 	msr	tcr_el2, x0
 
 	isb
@@ -292,6 +288,8 @@ alternative_else_nop_endif
 	mov	sp, x0
 
 	/* And turn the MMU back on! */
+	dsb	nsh
+	isb
 	set_sctlr_el2	x2
 	ret	x1
 SYM_FUNC_END(__pkvm_init_switch_pgd)
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/mem_protect.c linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/mem_protect.c
index 8d0a5834e883..861c76021a25 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/mem_protect.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/mem_protect.c
@@ -91,7 +91,7 @@ static void host_s2_put_page(void *addr)
 	hyp_put_page(&host_s2_pool, addr);
 }
 
-static void host_s2_free_unlinked_table(void *addr, u32 level)
+static void host_s2_free_unlinked_table(void *addr, s8 level)
 {
 	kvm_pgtable_stage2_free_unlinked(&host_mmu.mm_ops, addr, level);
 }
@@ -443,7 +443,7 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
 {
 	struct kvm_mem_range cur;
 	kvm_pte_t pte;
-	u32 level;
+	s8 level;
 	int ret;
 
 	hyp_assert_lock_held(&host_mmu.lock);
@@ -462,7 +462,7 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
 		cur.start = ALIGN_DOWN(addr, granule);
 		cur.end = cur.start + granule;
 		level++;
-	} while ((level < KVM_PGTABLE_MAX_LEVELS) &&
+	} while ((level <= KVM_PGTABLE_LAST_LEVEL) &&
 			!(kvm_level_supports_block_mapping(level) &&
 			  range_included(&cur, range)));
 
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/mm.c linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/mm.c
index 65a7a186d7b2..b01a3d1078a8 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/mm.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/mm.c
@@ -260,7 +260,7 @@ static void fixmap_clear_slot(struct hyp_fixmap_slot *slot)
 	 * https://lore.kernel.org/kvm/20221017115209.2099-1-will@kernel.org/T/#mf10dfbaf1eaef9274c581b81c53758918c1d0f03
 	 */
 	dsb(ishst);
-	__tlbi_level(vale2is, __TLBI_VADDR(addr, 0), (KVM_PGTABLE_MAX_LEVELS - 1));
+	__tlbi_level(vale2is, __TLBI_VADDR(addr, 0), KVM_PGTABLE_LAST_LEVEL);
 	dsb(ish);
 	isb();
 }
@@ -275,7 +275,7 @@ static int __create_fixmap_slot_cb(const struct kvm_pgtable_visit_ctx *ctx,
 {
 	struct hyp_fixmap_slot *slot = per_cpu_ptr(&fixmap_slots, (u64)ctx->arg);
 
-	if (!kvm_pte_valid(ctx->old) || ctx->level != KVM_PGTABLE_MAX_LEVELS - 1)
+	if (!kvm_pte_valid(ctx->old) || ctx->level != KVM_PGTABLE_LAST_LEVEL)
 		return -EINVAL;
 
 	slot->addr = ctx->addr;
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/page_alloc.c linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/page_alloc.c
index b1e392186a0f..e691290d3765 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/page_alloc.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/page_alloc.c
@@ -228,7 +228,8 @@ int hyp_pool_init(struct hyp_pool *pool, u64 pfn, unsigned int nr_pages,
 	int i;
 
 	hyp_spin_lock_init(&pool->lock);
-	pool->max_order = min(MAX_ORDER, get_order(nr_pages << PAGE_SHIFT));
+	pool->max_order = min(MAX_PAGE_ORDER,
+			      get_order(nr_pages << PAGE_SHIFT));
 	for (i = 0; i <= pool->max_order; i++)
 		INIT_LIST_HEAD(&pool->free_area[i]);
 	pool->range_start = phys;
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/pkvm.c linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/pkvm.c
index 9d23a51d7f75..26dd9a20ad6e 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/pkvm.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/pkvm.c
@@ -12,7 +12,7 @@
 #include <nvhe/pkvm.h>
 #include <nvhe/trap_handler.h>
 
-/* Used by icache_is_vpipt(). */
+/* Used by icache_is_aliasing(). */
 unsigned long __icache_flags;
 
 /* Used by kvm_get_vttbr(). */
@@ -136,6 +136,10 @@ static void pvm_init_traps_aa64dfr0(struct kvm_vcpu *vcpu)
 			cptr_set |= CPTR_EL2_TTA;
 	}
 
+	/* Trap External Trace */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_ExtTrcBuff), feature_ids))
+		mdcr_clear |= MDCR_EL2_E2TB_MASK << MDCR_EL2_E2TB_SHIFT;
+
 	vcpu->arch.mdcr_el2 |= mdcr_set;
 	vcpu->arch.mdcr_el2 &= ~mdcr_clear;
 	vcpu->arch.cptr_el2 |= cptr_set;
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/setup.c linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/setup.c
index 0d5e0a89ddce..bc58d1b515af 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/setup.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/setup.c
@@ -181,7 +181,7 @@ static int fix_host_ownership_walker(const struct kvm_pgtable_visit_ctx *ctx,
 	if (!kvm_pte_valid(ctx->old))
 		return 0;
 
-	if (ctx->level != (KVM_PGTABLE_MAX_LEVELS - 1))
+	if (ctx->level != KVM_PGTABLE_LAST_LEVEL)
 		return -EINVAL;
 
 	phys = kvm_pte_to_phys(ctx->old);
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/tlb.c linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/tlb.c
index 1b265713d6be..a60fb13e2192 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/hyp/nvhe/tlb.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/hyp/nvhe/tlb.c
@@ -105,28 +105,6 @@ void __kvm_tlb_flush_vmid_ipa(struct kvm_s2_mmu *mmu,
 	dsb(ish);
 	isb();
 
-	/*
-	 * If the host is running at EL1 and we have a VPIPT I-cache,
-	 * then we must perform I-cache maintenance at EL2 in order for
-	 * it to have an effect on the guest. Since the guest cannot hit
-	 * I-cache lines allocated with a different VMID, we don't need
-	 * to worry about junk out of guest reset (we nuke the I-cache on
-	 * VMID rollover), but we do need to be careful when remapping
-	 * executable pages for the same guest. This can happen when KSM
-	 * takes a CoW fault on an executable page, copies the page into
-	 * a page that was previously mapped in the guest and then needs
-	 * to invalidate the guest view of the I-cache for that page
-	 * from EL1. To solve this, we invalidate the entire I-cache when
-	 * unmapping a page from a guest if we have a VPIPT I-cache but
-	 * the host is running at EL1. As above, we could do better if
-	 * we had the VA.
-	 *
-	 * The moral of this story is: if you have a VPIPT I-cache, then
-	 * you should be running with VHE enabled.
-	 */
-	if (icache_is_vpipt())
-		icache_inval_all_pou();
-
 	__tlb_switch_to_host(&cxt);
 }
 
@@ -157,28 +135,6 @@ void __kvm_tlb_flush_vmid_ipa_nsh(struct kvm_s2_mmu *mmu,
 	dsb(nsh);
 	isb();
 
-	/*
-	 * If the host is running at EL1 and we have a VPIPT I-cache,
-	 * then we must perform I-cache maintenance at EL2 in order for
-	 * it to have an effect on the guest. Since the guest cannot hit
-	 * I-cache lines allocated with a different VMID, we don't need
-	 * to worry about junk out of guest reset (we nuke the I-cache on
-	 * VMID rollover), but we do need to be careful when remapping
-	 * executable pages for the same guest. This can happen when KSM
-	 * takes a CoW fault on an executable page, copies the page into
-	 * a page that was previously mapped in the guest and then needs
-	 * to invalidate the guest view of the I-cache for that page
-	 * from EL1. To solve this, we invalidate the entire I-cache when
-	 * unmapping a page from a guest if we have a VPIPT I-cache but
-	 * the host is running at EL1. As above, we could do better if
-	 * we had the VA.
-	 *
-	 * The moral of this story is: if you have a VPIPT I-cache, then
-	 * you should be running with VHE enabled.
-	 */
-	if (icache_is_vpipt())
-		icache_inval_all_pou();
-
 	__tlb_switch_to_host(&cxt);
 }
 
@@ -205,10 +161,6 @@ void __kvm_tlb_flush_vmid_range(struct kvm_s2_mmu *mmu,
 	dsb(ish);
 	isb();
 
-	/* See the comment in __kvm_tlb_flush_vmid_ipa() */
-	if (icache_is_vpipt())
-		icache_inval_all_pou();
-
 	__tlb_switch_to_host(&cxt);
 }
 
@@ -246,18 +198,5 @@ void __kvm_flush_vm_context(void)
 	/* Same remark as in __tlb_switch_to_guest() */
 	dsb(ish);
 	__tlbi(alle1is);
-
-	/*
-	 * VIPT and PIPT caches are not affected by VMID, so no maintenance
-	 * is necessary across a VMID rollover.
-	 *
-	 * VPIPT caches constrain lookup and maintenance to the active VMID,
-	 * so we need to invalidate lines with a stale VMID to avoid an ABA
-	 * race after multiple rollovers.
-	 *
-	 */
-	if (icache_is_vpipt())
-		asm volatile("ic ialluis");
-
 	dsb(ish);
 }
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/hyp/pgtable.c linux-libre-6.8-gnu/arch/arm64/kvm/hyp/pgtable.c
index 1966fdee740e..ab9d05fcf98b 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/hyp/pgtable.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/hyp/pgtable.c
@@ -79,7 +79,10 @@ static bool kvm_pgtable_walk_skip_cmo(const struct kvm_pgtable_visit_ctx *ctx)
 
 static bool kvm_phys_is_valid(u64 phys)
 {
-	return phys < BIT(id_aa64mmfr0_parange_to_phys_shift(ID_AA64MMFR0_EL1_PARANGE_MAX));
+	u64 parange_max = kvm_get_parange_max();
+	u8 shift = id_aa64mmfr0_parange_to_phys_shift(parange_max);
+
+	return phys < BIT(shift);
 }
 
 static bool kvm_block_mapping_supported(const struct kvm_pgtable_visit_ctx *ctx, u64 phys)
@@ -98,7 +101,7 @@ static bool kvm_block_mapping_supported(const struct kvm_pgtable_visit_ctx *ctx,
 	return IS_ALIGNED(ctx->addr, granule);
 }
 
-static u32 kvm_pgtable_idx(struct kvm_pgtable_walk_data *data, u32 level)
+static u32 kvm_pgtable_idx(struct kvm_pgtable_walk_data *data, s8 level)
 {
 	u64 shift = kvm_granule_shift(level);
 	u64 mask = BIT(PAGE_SHIFT - 3) - 1;
@@ -114,7 +117,7 @@ static u32 kvm_pgd_page_idx(struct kvm_pgtable *pgt, u64 addr)
 	return (addr & mask) >> shift;
 }
 
-static u32 kvm_pgd_pages(u32 ia_bits, u32 start_level)
+static u32 kvm_pgd_pages(u32 ia_bits, s8 start_level)
 {
 	struct kvm_pgtable pgt = {
 		.ia_bits	= ia_bits,
@@ -124,9 +127,9 @@ static u32 kvm_pgd_pages(u32 ia_bits, u32 start_level)
 	return kvm_pgd_page_idx(&pgt, -1ULL) + 1;
 }
 
-static bool kvm_pte_table(kvm_pte_t pte, u32 level)
+static bool kvm_pte_table(kvm_pte_t pte, s8 level)
 {
-	if (level == KVM_PGTABLE_MAX_LEVELS - 1)
+	if (level == KVM_PGTABLE_LAST_LEVEL)
 		return false;
 
 	if (!kvm_pte_valid(pte))
@@ -154,11 +157,11 @@ static kvm_pte_t kvm_init_table_pte(kvm_pte_t *childp, struct kvm_pgtable_mm_ops
 	return pte;
 }
 
-static kvm_pte_t kvm_init_valid_leaf_pte(u64 pa, kvm_pte_t attr, u32 level)
+static kvm_pte_t kvm_init_valid_leaf_pte(u64 pa, kvm_pte_t attr, s8 level)
 {
 	kvm_pte_t pte = kvm_phys_to_pte(pa);
-	u64 type = (level == KVM_PGTABLE_MAX_LEVELS - 1) ? KVM_PTE_TYPE_PAGE :
-							   KVM_PTE_TYPE_BLOCK;
+	u64 type = (level == KVM_PGTABLE_LAST_LEVEL) ? KVM_PTE_TYPE_PAGE :
+						       KVM_PTE_TYPE_BLOCK;
 
 	pte |= attr & (KVM_PTE_LEAF_ATTR_LO | KVM_PTE_LEAF_ATTR_HI);
 	pte |= FIELD_PREP(KVM_PTE_TYPE, type);
@@ -203,11 +206,11 @@ static bool kvm_pgtable_walk_continue(const struct kvm_pgtable_walker *walker,
 }
 
 static int __kvm_pgtable_walk(struct kvm_pgtable_walk_data *data,
-			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, u32 level);
+			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, s8 level);
 
 static inline int __kvm_pgtable_visit(struct kvm_pgtable_walk_data *data,
 				      struct kvm_pgtable_mm_ops *mm_ops,
-				      kvm_pteref_t pteref, u32 level)
+				      kvm_pteref_t pteref, s8 level)
 {
 	enum kvm_pgtable_walk_flags flags = data->walker->flags;
 	kvm_pte_t *ptep = kvm_dereference_pteref(data->walker, pteref);
@@ -272,12 +275,13 @@ out:
 }
 
 static int __kvm_pgtable_walk(struct kvm_pgtable_walk_data *data,
-			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, u32 level)
+			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, s8 level)
 {
 	u32 idx;
 	int ret = 0;
 
-	if (WARN_ON_ONCE(level >= KVM_PGTABLE_MAX_LEVELS))
+	if (WARN_ON_ONCE(level < KVM_PGTABLE_FIRST_LEVEL ||
+			 level > KVM_PGTABLE_LAST_LEVEL))
 		return -EINVAL;
 
 	for (idx = kvm_pgtable_idx(data, level); idx < PTRS_PER_PTE; ++idx) {
@@ -340,7 +344,7 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size,
 
 struct leaf_walk_data {
 	kvm_pte_t	pte;
-	u32		level;
+	s8		level;
 };
 
 static int leaf_walker(const struct kvm_pgtable_visit_ctx *ctx,
@@ -355,7 +359,7 @@ static int leaf_walker(const struct kvm_pgtable_visit_ctx *ctx,
 }
 
 int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr,
-			 kvm_pte_t *ptep, u32 *level)
+			 kvm_pte_t *ptep, s8 *level)
 {
 	struct leaf_walk_data data;
 	struct kvm_pgtable_walker walker = {
@@ -408,7 +412,8 @@ static int hyp_set_prot_attr(enum kvm_pgtable_prot prot, kvm_pte_t *ptep)
 	}
 
 	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_AP, ap);
-	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_SH, sh);
+	if (!kvm_lpa2_is_enabled())
+		attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_SH, sh);
 	attr |= KVM_PTE_LEAF_ATTR_LO_S1_AF;
 	attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW;
 	*ptep = attr;
@@ -467,7 +472,7 @@ static int hyp_map_walker(const struct kvm_pgtable_visit_ctx *ctx,
 	if (hyp_map_walker_try_leaf(ctx, data))
 		return 0;
 
-	if (WARN_ON(ctx->level == KVM_PGTABLE_MAX_LEVELS - 1))
+	if (WARN_ON(ctx->level == KVM_PGTABLE_LAST_LEVEL))
 		return -EINVAL;
 
 	childp = (kvm_pte_t *)mm_ops->zalloc_page(NULL);
@@ -563,14 +568,19 @@ u64 kvm_pgtable_hyp_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size)
 int kvm_pgtable_hyp_init(struct kvm_pgtable *pgt, u32 va_bits,
 			 struct kvm_pgtable_mm_ops *mm_ops)
 {
-	u64 levels = ARM64_HW_PGTABLE_LEVELS(va_bits);
+	s8 start_level = KVM_PGTABLE_LAST_LEVEL + 1 -
+			 ARM64_HW_PGTABLE_LEVELS(va_bits);
+
+	if (start_level < KVM_PGTABLE_FIRST_LEVEL ||
+	    start_level > KVM_PGTABLE_LAST_LEVEL)
+		return -EINVAL;
 
 	pgt->pgd = (kvm_pteref_t)mm_ops->zalloc_page(NULL);
 	if (!pgt->pgd)
 		return -ENOMEM;
 
 	pgt->ia_bits		= va_bits;
-	pgt->start_level	= KVM_PGTABLE_MAX_LEVELS - levels;
+	pgt->start_level	= start_level;
 	pgt->mm_ops		= mm_ops;
 	pgt->mmu		= NULL;
 	pgt->force_pte_cb	= NULL;
@@ -624,7 +634,7 @@ struct stage2_map_data {
 u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
 {
 	u64 vtcr = VTCR_EL2_FLAGS;
-	u8 lvls;
+	s8 lvls;
 
 	vtcr |= kvm_get_parange(mmfr0) << VTCR_EL2_PS_SHIFT;
 	vtcr |= VTCR_EL2_T0SZ(phys_shift);
@@ -635,6 +645,15 @@ u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
 	lvls = stage2_pgtable_levels(phys_shift);
 	if (lvls < 2)
 		lvls = 2;
+
+	/*
+	 * When LPA2 is enabled, the HW supports an extra level of translation
+	 * (for 5 in total) when using 4K pages. It also introduces VTCR_EL2.SL2
+	 * to as an addition to SL0 to enable encoding this extra start level.
+	 * However, since we always use concatenated pages for the first level
+	 * lookup, we will never need this extra level and therefore do not need
+	 * to touch SL2.
+	 */
 	vtcr |= VTCR_EL2_LVLS_TO_SL0(lvls);
 
 #ifdef CONFIG_ARM64_HW_AFDBM
@@ -654,6 +673,9 @@ u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
 		vtcr |= VTCR_EL2_HA;
 #endif /* CONFIG_ARM64_HW_AFDBM */
 
+	if (kvm_lpa2_is_enabled())
+		vtcr |= VTCR_EL2_DS;
+
 	/* Set the vmid bits */
 	vtcr |= (get_vmid_bits(mmfr1) == 16) ?
 		VTCR_EL2_VS_16BIT :
@@ -711,7 +733,9 @@ static int stage2_set_prot_attr(struct kvm_pgtable *pgt, enum kvm_pgtable_prot p
 	if (prot & KVM_PGTABLE_PROT_W)
 		attr |= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W;
 
-	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S2_SH, sh);
+	if (!kvm_lpa2_is_enabled())
+		attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S2_SH, sh);
+
 	attr |= KVM_PTE_LEAF_ATTR_LO_S2_AF;
 	attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW;
 	*ptep = attr;
@@ -902,7 +926,7 @@ static bool stage2_leaf_mapping_allowed(const struct kvm_pgtable_visit_ctx *ctx,
 {
 	u64 phys = stage2_map_walker_phys_addr(ctx, data);
 
-	if (data->force_pte && (ctx->level < (KVM_PGTABLE_MAX_LEVELS - 1)))
+	if (data->force_pte && ctx->level < KVM_PGTABLE_LAST_LEVEL)
 		return false;
 
 	return kvm_block_mapping_supported(ctx, phys);
@@ -981,7 +1005,7 @@ static int stage2_map_walk_leaf(const struct kvm_pgtable_visit_ctx *ctx,
 	if (ret != -E2BIG)
 		return ret;
 
-	if (WARN_ON(ctx->level == KVM_PGTABLE_MAX_LEVELS - 1))
+	if (WARN_ON(ctx->level == KVM_PGTABLE_LAST_LEVEL))
 		return -EINVAL;
 
 	if (!data->memcache)
@@ -1151,7 +1175,7 @@ struct stage2_attr_data {
 	kvm_pte_t			attr_set;
 	kvm_pte_t			attr_clr;
 	kvm_pte_t			pte;
-	u32				level;
+	s8				level;
 };
 
 static int stage2_attr_walker(const struct kvm_pgtable_visit_ctx *ctx,
@@ -1194,7 +1218,7 @@ static int stage2_attr_walker(const struct kvm_pgtable_visit_ctx *ctx,
 static int stage2_update_leaf_attrs(struct kvm_pgtable *pgt, u64 addr,
 				    u64 size, kvm_pte_t attr_set,
 				    kvm_pte_t attr_clr, kvm_pte_t *orig_pte,
-				    u32 *level, enum kvm_pgtable_walk_flags flags)
+				    s8 *level, enum kvm_pgtable_walk_flags flags)
 {
 	int ret;
 	kvm_pte_t attr_mask = KVM_PTE_LEAF_ATTR_LO | KVM_PTE_LEAF_ATTR_HI;
@@ -1296,7 +1320,7 @@ int kvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr,
 				   enum kvm_pgtable_prot prot)
 {
 	int ret;
-	u32 level;
+	s8 level;
 	kvm_pte_t set = 0, clr = 0;
 
 	if (prot & KVM_PTE_LEAF_ATTR_HI_SW)
@@ -1349,7 +1373,7 @@ int kvm_pgtable_stage2_flush(struct kvm_pgtable *pgt, u64 addr, u64 size)
 }
 
 kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
-					      u64 phys, u32 level,
+					      u64 phys, s8 level,
 					      enum kvm_pgtable_prot prot,
 					      void *mc, bool force_pte)
 {
@@ -1395,7 +1419,6 @@ kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
 				 level + 1);
 	if (ret) {
 		kvm_pgtable_stage2_free_unlinked(mm_ops, pgtable, level);
-		mm_ops->put_page(pgtable);
 		return ERR_PTR(ret);
 	}
 
@@ -1407,7 +1430,7 @@ kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
  * fully populated tree up to the PTE entries. Note that @level is
  * interpreted as in "level @level entry".
  */
-static int stage2_block_get_nr_page_tables(u32 level)
+static int stage2_block_get_nr_page_tables(s8 level)
 {
 	switch (level) {
 	case 1:
@@ -1418,7 +1441,7 @@ static int stage2_block_get_nr_page_tables(u32 level)
 		return 0;
 	default:
 		WARN_ON_ONCE(level < KVM_PGTABLE_MIN_BLOCK_LEVEL ||
-			     level >= KVM_PGTABLE_MAX_LEVELS);
+			     level > KVM_PGTABLE_LAST_LEVEL);
 		return -EINVAL;
 	};
 }
@@ -1431,13 +1454,13 @@ static int stage2_split_walker(const struct kvm_pgtable_visit_ctx *ctx,
 	struct kvm_s2_mmu *mmu;
 	kvm_pte_t pte = ctx->old, new, *childp;
 	enum kvm_pgtable_prot prot;
-	u32 level = ctx->level;
+	s8 level = ctx->level;
 	bool force_pte;
 	int nr_pages;
 	u64 phys;
 
 	/* No huge-pages exist at the last level */
-	if (level == KVM_PGTABLE_MAX_LEVELS - 1)
+	if (level == KVM_PGTABLE_LAST_LEVEL)
 		return 0;
 
 	/* We only split valid block mappings */
@@ -1478,7 +1501,6 @@ static int stage2_split_walker(const struct kvm_pgtable_visit_ctx *ctx,
 
 	if (!stage2_try_break_pte(ctx, mmu)) {
 		kvm_pgtable_stage2_free_unlinked(mm_ops, childp, level);
-		mm_ops->put_page(childp);
 		return -EAGAIN;
 	}
 
@@ -1514,7 +1536,7 @@ int __kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu,
 	u64 vtcr = mmu->vtcr;
 	u32 ia_bits = VTCR_EL2_IPA(vtcr);
 	u32 sl0 = FIELD_GET(VTCR_EL2_SL0_MASK, vtcr);
-	u32 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
+	s8 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
 
 	pgd_sz = kvm_pgd_pages(ia_bits, start_level) * PAGE_SIZE;
 	pgt->pgd = (kvm_pteref_t)mm_ops->zalloc_pages_exact(pgd_sz);
@@ -1537,7 +1559,7 @@ size_t kvm_pgtable_stage2_pgd_size(u64 vtcr)
 {
 	u32 ia_bits = VTCR_EL2_IPA(vtcr);
 	u32 sl0 = FIELD_GET(VTCR_EL2_SL0_MASK, vtcr);
-	u32 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
+	s8 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
 
 	return kvm_pgd_pages(ia_bits, start_level) * PAGE_SIZE;
 }
@@ -1573,7 +1595,7 @@ void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt)
 	pgt->pgd = NULL;
 }
 
-void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, u32 level)
+void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, s8 level)
 {
 	kvm_pteref_t ptep = (kvm_pteref_t)pgtable;
 	struct kvm_pgtable_walker walker = {
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/hyp/vhe/tlb.c linux-libre-6.8-gnu/arch/arm64/kvm/hyp/vhe/tlb.c
index b636b4111dbf..b32e2940df7d 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/hyp/vhe/tlb.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/hyp/vhe/tlb.c
@@ -216,18 +216,5 @@ void __kvm_flush_vm_context(void)
 {
 	dsb(ishst);
 	__tlbi(alle1is);
-
-	/*
-	 * VIPT and PIPT caches are not affected by VMID, so no maintenance
-	 * is necessary across a VMID rollover.
-	 *
-	 * VPIPT caches constrain lookup and maintenance to the active VMID,
-	 * so we need to invalidate lines with a stale VMID to avoid an ABA
-	 * race after multiple rollovers.
-	 *
-	 */
-	if (icache_is_vpipt())
-		asm volatile("ic ialluis");
-
 	dsb(ish);
 }
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/mmu.c linux-libre-6.8-gnu/arch/arm64/kvm/mmu.c
index d87c8fcc4c24..d14504821b79 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/mmu.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/mmu.c
@@ -223,12 +223,12 @@ static void stage2_free_unlinked_table_rcu_cb(struct rcu_head *head)
 {
 	struct page *page = container_of(head, struct page, rcu_head);
 	void *pgtable = page_to_virt(page);
-	u32 level = page_private(page);
+	s8 level = page_private(page);
 
 	kvm_pgtable_stage2_free_unlinked(&kvm_s2_mm_ops, pgtable, level);
 }
 
-static void stage2_free_unlinked_table(void *addr, u32 level)
+static void stage2_free_unlinked_table(void *addr, s8 level)
 {
 	struct page *page = virt_to_page(addr);
 
@@ -804,13 +804,13 @@ static int get_user_mapping_size(struct kvm *kvm, u64 addr)
 	struct kvm_pgtable pgt = {
 		.pgd		= (kvm_pteref_t)kvm->mm->pgd,
 		.ia_bits	= vabits_actual,
-		.start_level	= (KVM_PGTABLE_MAX_LEVELS -
-				   CONFIG_PGTABLE_LEVELS),
+		.start_level	= (KVM_PGTABLE_LAST_LEVEL -
+				   CONFIG_PGTABLE_LEVELS + 1),
 		.mm_ops		= &kvm_user_mm_ops,
 	};
 	unsigned long flags;
 	kvm_pte_t pte = 0;	/* Keep GCC quiet... */
-	u32 level = ~0;
+	s8 level = S8_MAX;
 	int ret;
 
 	/*
@@ -829,7 +829,9 @@ static int get_user_mapping_size(struct kvm *kvm, u64 addr)
 	 * Not seeing an error, but not updating level? Something went
 	 * deeply wrong...
 	 */
-	if (WARN_ON(level >= KVM_PGTABLE_MAX_LEVELS))
+	if (WARN_ON(level > KVM_PGTABLE_LAST_LEVEL))
+		return -EFAULT;
+	if (WARN_ON(level < KVM_PGTABLE_FIRST_LEVEL))
 		return -EFAULT;
 
 	/* Oops, the userspace PTs are gone... Replay the fault */
@@ -1374,7 +1376,7 @@ static bool kvm_vma_mte_allowed(struct vm_area_struct *vma)
 
 static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			  struct kvm_memory_slot *memslot, unsigned long hva,
-			  unsigned long fault_status)
+			  bool fault_is_perm)
 {
 	int ret = 0;
 	bool write_fault, writable, force_pte = false;
@@ -1388,17 +1390,17 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	gfn_t gfn;
 	kvm_pfn_t pfn;
 	bool logging_active = memslot_is_logging(memslot);
-	unsigned long fault_level = kvm_vcpu_trap_get_fault_level(vcpu);
 	long vma_pagesize, fault_granule;
 	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R;
 	struct kvm_pgtable *pgt;
 
-	fault_granule = 1UL << ARM64_HW_PGTABLE_LEVEL_SHIFT(fault_level);
+	if (fault_is_perm)
+		fault_granule = kvm_vcpu_trap_get_perm_fault_granule(vcpu);
 	write_fault = kvm_is_write_fault(vcpu);
 	exec_fault = kvm_vcpu_trap_is_exec_fault(vcpu);
 	VM_BUG_ON(write_fault && exec_fault);
 
-	if (fault_status == ESR_ELx_FSC_PERM && !write_fault && !exec_fault) {
+	if (fault_is_perm && !write_fault && !exec_fault) {
 		kvm_err("Unexpected L2 read permission error\n");
 		return -EFAULT;
 	}
@@ -1409,8 +1411,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * only exception to this is when dirty logging is enabled at runtime
 	 * and a write fault needs to collapse a block entry into a table.
 	 */
-	if (fault_status != ESR_ELx_FSC_PERM ||
-	    (logging_active && write_fault)) {
+	if (!fault_is_perm || (logging_active && write_fault)) {
 		ret = kvm_mmu_topup_memory_cache(memcache,
 						 kvm_mmu_cache_min_pages(vcpu->arch.hw_mmu));
 		if (ret)
@@ -1527,8 +1528,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * backed by a THP and thus use block mapping if possible.
 	 */
 	if (vma_pagesize == PAGE_SIZE && !(force_pte || device)) {
-		if (fault_status ==  ESR_ELx_FSC_PERM &&
-		    fault_granule > PAGE_SIZE)
+		if (fault_is_perm && fault_granule > PAGE_SIZE)
 			vma_pagesize = fault_granule;
 		else
 			vma_pagesize = transparent_hugepage_adjust(kvm, memslot,
@@ -1541,7 +1541,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		}
 	}
 
-	if (fault_status != ESR_ELx_FSC_PERM && !device && kvm_has_mte(kvm)) {
+	if (!fault_is_perm && !device && kvm_has_mte(kvm)) {
 		/* Check the VMM hasn't introduced a new disallowed VMA */
 		if (mte_allowed) {
 			sanitise_mte_tags(kvm, pfn, vma_pagesize);
@@ -1567,7 +1567,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * permissions only if vma_pagesize equals fault_granule. Otherwise,
 	 * kvm_pgtable_stage2_map() should be called to change block size.
 	 */
-	if (fault_status == ESR_ELx_FSC_PERM && vma_pagesize == fault_granule)
+	if (fault_is_perm && vma_pagesize == fault_granule)
 		ret = kvm_pgtable_stage2_relax_perms(pgt, fault_ipa, prot);
 	else
 		ret = kvm_pgtable_stage2_map(pgt, fault_ipa, vma_pagesize,
@@ -1618,7 +1618,7 @@ static void handle_access_fault(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa)
  */
 int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 {
-	unsigned long fault_status;
+	unsigned long esr;
 	phys_addr_t fault_ipa;
 	struct kvm_memory_slot *memslot;
 	unsigned long hva;
@@ -1626,12 +1626,12 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 	gfn_t gfn;
 	int ret, idx;
 
-	fault_status = kvm_vcpu_trap_get_fault_type(vcpu);
+	esr = kvm_vcpu_get_esr(vcpu);
 
 	fault_ipa = kvm_vcpu_get_fault_ipa(vcpu);
 	is_iabt = kvm_vcpu_trap_is_iabt(vcpu);
 
-	if (fault_status == ESR_ELx_FSC_FAULT) {
+	if (esr_fsc_is_permission_fault(esr)) {
 		/* Beyond sanitised PARange (which is the IPA limit) */
 		if (fault_ipa >= BIT_ULL(get_kvm_ipa_limit())) {
 			kvm_inject_size_fault(vcpu);
@@ -1666,9 +1666,9 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 			      kvm_vcpu_get_hfar(vcpu), fault_ipa);
 
 	/* Check the stage-2 fault is trans. fault or write fault */
-	if (fault_status != ESR_ELx_FSC_FAULT &&
-	    fault_status != ESR_ELx_FSC_PERM &&
-	    fault_status != ESR_ELx_FSC_ACCESS) {
+	if (!esr_fsc_is_translation_fault(esr) &&
+	    !esr_fsc_is_permission_fault(esr) &&
+	    !esr_fsc_is_access_flag_fault(esr)) {
 		kvm_err("Unsupported FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n",
 			kvm_vcpu_trap_get_class(vcpu),
 			(unsigned long)kvm_vcpu_trap_get_fault(vcpu),
@@ -1730,13 +1730,14 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 	/* Userspace should not be able to register out-of-bounds IPAs */
 	VM_BUG_ON(fault_ipa >= kvm_phys_size(vcpu->arch.hw_mmu));
 
-	if (fault_status == ESR_ELx_FSC_ACCESS) {
+	if (esr_fsc_is_access_flag_fault(esr)) {
 		handle_access_fault(vcpu, fault_ipa);
 		ret = 1;
 		goto out_unlock;
 	}
 
-	ret = user_mem_abort(vcpu, fault_ipa, memslot, hva, fault_status);
+	ret = user_mem_abort(vcpu, fault_ipa, memslot, hva,
+			     esr_fsc_is_permission_fault(esr));
 	if (ret == 0)
 		ret = 1;
 out:
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/nested.c linux-libre-6.8-gnu/arch/arm64/kvm/nested.c
index 042695a210ce..ba95d044bc98 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/nested.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/nested.c
@@ -23,13 +23,9 @@
  * This list should get updated as new features get added to the NV
  * support, and new extension to the architecture.
  */
-void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p,
-			  const struct sys_reg_desc *r)
+static u64 limit_nv_id_reg(u32 id, u64 val)
 {
-	u32 id = reg_to_encoding(r);
-	u64 val, tmp;
-
-	val = p->regval;
+	u64 tmp;
 
 	switch (id) {
 	case SYS_ID_AA64ISAR0_EL1:
@@ -158,5 +154,17 @@ void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p,
 		break;
 	}
 
-	p->regval = val;
+	return val;
+}
+int kvm_init_nv_sysregs(struct kvm *kvm)
+{
+	mutex_lock(&kvm->arch.config_lock);
+
+	for (int i = 0; i < KVM_ARM_ID_REG_NUM; i++)
+		kvm->arch.id_regs[i] = limit_nv_id_reg(IDX_IDREG(i),
+						       kvm->arch.id_regs[i]);
+
+	mutex_unlock(&kvm->arch.config_lock);
+
+	return 0;
 }
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/pkvm.c linux-libre-6.8-gnu/arch/arm64/kvm/pkvm.c
index 8350fb8fee0b..b7be96a53597 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/pkvm.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/pkvm.c
@@ -101,6 +101,17 @@ void __init kvm_hyp_reserve(void)
 		 hyp_mem_base);
 }
 
+static void __pkvm_destroy_hyp_vm(struct kvm *host_kvm)
+{
+	if (host_kvm->arch.pkvm.handle) {
+		WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm,
+					  host_kvm->arch.pkvm.handle));
+	}
+
+	host_kvm->arch.pkvm.handle = 0;
+	free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc);
+}
+
 /*
  * Allocates and donates memory for hypervisor VM structs at EL2.
  *
@@ -181,7 +192,7 @@ static int __pkvm_create_hyp_vm(struct kvm *host_kvm)
 	return 0;
 
 destroy_vm:
-	pkvm_destroy_hyp_vm(host_kvm);
+	__pkvm_destroy_hyp_vm(host_kvm);
 	return ret;
 free_vm:
 	free_pages_exact(hyp_vm, hyp_vm_sz);
@@ -194,23 +205,19 @@ int pkvm_create_hyp_vm(struct kvm *host_kvm)
 {
 	int ret = 0;
 
-	mutex_lock(&host_kvm->lock);
+	mutex_lock(&host_kvm->arch.config_lock);
 	if (!host_kvm->arch.pkvm.handle)
 		ret = __pkvm_create_hyp_vm(host_kvm);
-	mutex_unlock(&host_kvm->lock);
+	mutex_unlock(&host_kvm->arch.config_lock);
 
 	return ret;
 }
 
 void pkvm_destroy_hyp_vm(struct kvm *host_kvm)
 {
-	if (host_kvm->arch.pkvm.handle) {
-		WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm,
-					  host_kvm->arch.pkvm.handle));
-	}
-
-	host_kvm->arch.pkvm.handle = 0;
-	free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc);
+	mutex_lock(&host_kvm->arch.config_lock);
+	__pkvm_destroy_hyp_vm(host_kvm);
+	mutex_unlock(&host_kvm->arch.config_lock);
 }
 
 int pkvm_init_host_vm(struct kvm *host_kvm)
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/pmu-emul.c linux-libre-6.8-gnu/arch/arm64/kvm/pmu-emul.c
index fe99b3dab6ce..3d9467ff73bc 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/pmu-emul.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/pmu-emul.c
@@ -267,9 +267,8 @@ void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu)
 
 u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu)
 {
-	u64 val = kvm_vcpu_read_pmcr(vcpu) >> ARMV8_PMU_PMCR_N_SHIFT;
+	u64 val = FIELD_GET(ARMV8_PMU_PMCR_N, kvm_vcpu_read_pmcr(vcpu));
 
-	val &= ARMV8_PMU_PMCR_N_MASK;
 	if (val == 0)
 		return BIT(ARMV8_PMU_CYCLE_IDX);
 	else
@@ -1136,8 +1135,7 @@ u8 kvm_arm_pmu_get_pmuver_limit(void)
  */
 u64 kvm_vcpu_read_pmcr(struct kvm_vcpu *vcpu)
 {
-	u64 pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0) &
-			~(ARMV8_PMU_PMCR_N_MASK << ARMV8_PMU_PMCR_N_SHIFT);
+	u64 pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0);
 
-	return pmcr | ((u64)vcpu->kvm->arch.pmcr_n << ARMV8_PMU_PMCR_N_SHIFT);
+	return u64_replace_bits(pmcr, vcpu->kvm->arch.pmcr_n, ARMV8_PMU_PMCR_N);
 }
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/reset.c linux-libre-6.8-gnu/arch/arm64/kvm/reset.c
index 5bb4de162cab..68d1d05672bd 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/reset.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/reset.c
@@ -280,12 +280,11 @@ int __init kvm_set_ipa_limit(void)
 	parange = cpuid_feature_extract_unsigned_field(mmfr0,
 				ID_AA64MMFR0_EL1_PARANGE_SHIFT);
 	/*
-	 * IPA size beyond 48 bits could not be supported
-	 * on either 4K or 16K page size. Hence let's cap
-	 * it to 48 bits, in case it's reported as larger
-	 * on the system.
+	 * IPA size beyond 48 bits for 4K and 16K page size is only supported
+	 * when LPA2 is available. So if we have LPA2, enable it, else cap to 48
+	 * bits, in case it's reported as larger on the system.
 	 */
-	if (PAGE_SIZE != SZ_64K)
+	if (!kvm_lpa2_is_enabled() && PAGE_SIZE != SZ_64K)
 		parange = min(parange, (unsigned int)ID_AA64MMFR0_EL1_PARANGE_48);
 
 	/*
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/sys_regs.c linux-libre-6.8-gnu/arch/arm64/kvm/sys_regs.c
index 4735e1b37fb3..30253bd19917 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/sys_regs.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/sys_regs.c
@@ -45,44 +45,170 @@ static u64 sys_reg_to_index(const struct sys_reg_desc *reg);
 static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 		      u64 val);
 
-static bool read_from_write_only(struct kvm_vcpu *vcpu,
-				 struct sys_reg_params *params,
-				 const struct sys_reg_desc *r)
+static bool bad_trap(struct kvm_vcpu *vcpu,
+		     struct sys_reg_params *params,
+		     const struct sys_reg_desc *r,
+		     const char *msg)
 {
-	WARN_ONCE(1, "Unexpected sys_reg read to write-only register\n");
+	WARN_ONCE(1, "Unexpected %s\n", msg);
 	print_sys_reg_instr(params);
 	kvm_inject_undefined(vcpu);
 	return false;
 }
 
+static bool read_from_write_only(struct kvm_vcpu *vcpu,
+				 struct sys_reg_params *params,
+				 const struct sys_reg_desc *r)
+{
+	return bad_trap(vcpu, params, r,
+			"sys_reg read to write-only register");
+}
+
 static bool write_to_read_only(struct kvm_vcpu *vcpu,
 			       struct sys_reg_params *params,
 			       const struct sys_reg_desc *r)
 {
-	WARN_ONCE(1, "Unexpected sys_reg write to read-only register\n");
-	print_sys_reg_instr(params);
-	kvm_inject_undefined(vcpu);
-	return false;
+	return bad_trap(vcpu, params, r,
+			"sys_reg write to read-only register");
+}
+
+#define PURE_EL2_SYSREG(el2)						\
+	case el2: {							\
+		*el1r = el2;						\
+		return true;						\
+	}
+
+#define MAPPED_EL2_SYSREG(el2, el1, fn)					\
+	case el2: {							\
+		*xlate = fn;						\
+		*el1r = el1;						\
+		return true;						\
+	}
+
+static bool get_el2_to_el1_mapping(unsigned int reg,
+				   unsigned int *el1r, u64 (**xlate)(u64))
+{
+	switch (reg) {
+		PURE_EL2_SYSREG(  VPIDR_EL2	);
+		PURE_EL2_SYSREG(  VMPIDR_EL2	);
+		PURE_EL2_SYSREG(  ACTLR_EL2	);
+		PURE_EL2_SYSREG(  HCR_EL2	);
+		PURE_EL2_SYSREG(  MDCR_EL2	);
+		PURE_EL2_SYSREG(  HSTR_EL2	);
+		PURE_EL2_SYSREG(  HACR_EL2	);
+		PURE_EL2_SYSREG(  VTTBR_EL2	);
+		PURE_EL2_SYSREG(  VTCR_EL2	);
+		PURE_EL2_SYSREG(  RVBAR_EL2	);
+		PURE_EL2_SYSREG(  TPIDR_EL2	);
+		PURE_EL2_SYSREG(  HPFAR_EL2	);
+		PURE_EL2_SYSREG(  CNTHCTL_EL2	);
+		MAPPED_EL2_SYSREG(SCTLR_EL2,   SCTLR_EL1,
+				  translate_sctlr_el2_to_sctlr_el1	     );
+		MAPPED_EL2_SYSREG(CPTR_EL2,    CPACR_EL1,
+				  translate_cptr_el2_to_cpacr_el1	     );
+		MAPPED_EL2_SYSREG(TTBR0_EL2,   TTBR0_EL1,
+				  translate_ttbr0_el2_to_ttbr0_el1	     );
+		MAPPED_EL2_SYSREG(TTBR1_EL2,   TTBR1_EL1,   NULL	     );
+		MAPPED_EL2_SYSREG(TCR_EL2,     TCR_EL1,
+				  translate_tcr_el2_to_tcr_el1		     );
+		MAPPED_EL2_SYSREG(VBAR_EL2,    VBAR_EL1,    NULL	     );
+		MAPPED_EL2_SYSREG(AFSR0_EL2,   AFSR0_EL1,   NULL	     );
+		MAPPED_EL2_SYSREG(AFSR1_EL2,   AFSR1_EL1,   NULL	     );
+		MAPPED_EL2_SYSREG(ESR_EL2,     ESR_EL1,     NULL	     );
+		MAPPED_EL2_SYSREG(FAR_EL2,     FAR_EL1,     NULL	     );
+		MAPPED_EL2_SYSREG(MAIR_EL2,    MAIR_EL1,    NULL	     );
+		MAPPED_EL2_SYSREG(AMAIR_EL2,   AMAIR_EL1,   NULL	     );
+		MAPPED_EL2_SYSREG(ELR_EL2,     ELR_EL1,	    NULL	     );
+		MAPPED_EL2_SYSREG(SPSR_EL2,    SPSR_EL1,    NULL	     );
+	default:
+		return false;
+	}
 }
 
 u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg)
 {
 	u64 val = 0x8badf00d8badf00d;
+	u64 (*xlate)(u64) = NULL;
+	unsigned int el1r;
+
+	if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
+		goto memory_read;
 
-	if (vcpu_get_flag(vcpu, SYSREGS_ON_CPU) &&
-	    __vcpu_read_sys_reg_from_cpu(reg, &val))
+	if (unlikely(get_el2_to_el1_mapping(reg, &el1r, &xlate))) {
+		if (!is_hyp_ctxt(vcpu))
+			goto memory_read;
+
+		/*
+		 * If this register does not have an EL1 counterpart,
+		 * then read the stored EL2 version.
+		 */
+		if (reg == el1r)
+			goto memory_read;
+
+		/*
+		 * If we have a non-VHE guest and that the sysreg
+		 * requires translation to be used at EL1, use the
+		 * in-memory copy instead.
+		 */
+		if (!vcpu_el2_e2h_is_set(vcpu) && xlate)
+			goto memory_read;
+
+		/* Get the current version of the EL1 counterpart. */
+		WARN_ON(!__vcpu_read_sys_reg_from_cpu(el1r, &val));
 		return val;
+	}
 
+	/* EL1 register can't be on the CPU if the guest is in vEL2. */
+	if (unlikely(is_hyp_ctxt(vcpu)))
+		goto memory_read;
+
+	if (__vcpu_read_sys_reg_from_cpu(reg, &val))
+		return val;
+
+memory_read:
 	return __vcpu_sys_reg(vcpu, reg);
 }
 
 void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg)
 {
-	if (vcpu_get_flag(vcpu, SYSREGS_ON_CPU) &&
-	    __vcpu_write_sys_reg_to_cpu(val, reg))
+	u64 (*xlate)(u64) = NULL;
+	unsigned int el1r;
+
+	if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
+		goto memory_write;
+
+	if (unlikely(get_el2_to_el1_mapping(reg, &el1r, &xlate))) {
+		if (!is_hyp_ctxt(vcpu))
+			goto memory_write;
+
+		/*
+		 * Always store a copy of the write to memory to avoid having
+		 * to reverse-translate virtual EL2 system registers for a
+		 * non-VHE guest hypervisor.
+		 */
+		__vcpu_sys_reg(vcpu, reg) = val;
+
+		/* No EL1 counterpart? We're done here.? */
+		if (reg == el1r)
+			return;
+
+		if (!vcpu_el2_e2h_is_set(vcpu) && xlate)
+			val = xlate(val);
+
+		/* Redirect this to the EL1 version of the register. */
+		WARN_ON(!__vcpu_write_sys_reg_to_cpu(val, el1r));
+		return;
+	}
+
+	/* EL1 register can't be on the CPU if the guest is in vEL2. */
+	if (unlikely(is_hyp_ctxt(vcpu)))
+		goto memory_write;
+
+	if (__vcpu_write_sys_reg_to_cpu(val, reg))
 		return;
 
-	__vcpu_sys_reg(vcpu, reg) = val;
+memory_write:
+	 __vcpu_sys_reg(vcpu, reg) = val;
 }
 
 /* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */
@@ -877,7 +1003,7 @@ static bool pmu_counter_idx_valid(struct kvm_vcpu *vcpu, u64 idx)
 	u64 pmcr, val;
 
 	pmcr = kvm_vcpu_read_pmcr(vcpu);
-	val = (pmcr >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK;
+	val = FIELD_GET(ARMV8_PMU_PMCR_N, pmcr);
 	if (idx >= val && idx != ARMV8_PMU_CYCLE_IDX) {
 		kvm_inject_undefined(vcpu);
 		return false;
@@ -1143,7 +1269,7 @@ static int get_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 		    u64 val)
 {
-	u8 new_n = (val >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK;
+	u8 new_n = FIELD_GET(ARMV8_PMU_PMCR_N, val);
 	struct kvm *kvm = vcpu->kvm;
 
 	mutex_lock(&kvm->arch.config_lock);
@@ -1505,8 +1631,6 @@ static bool access_id_reg(struct kvm_vcpu *vcpu,
 		return write_to_read_only(vcpu, p, r);
 
 	p->regval = read_id_reg(vcpu, r);
-	if (vcpu_has_nv(vcpu))
-		access_nested_id_reg(vcpu, p, r);
 
 	return true;
 }
@@ -1885,6 +2009,32 @@ static unsigned int el2_visibility(const struct kvm_vcpu *vcpu,
 	return REG_HIDDEN;
 }
 
+static bool bad_vncr_trap(struct kvm_vcpu *vcpu,
+			  struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	/*
+	 * We really shouldn't be here, and this is likely the result
+	 * of a misconfigured trap, as this register should target the
+	 * VNCR page, and nothing else.
+	 */
+	return bad_trap(vcpu, p, r,
+			"trap of VNCR-backed register");
+}
+
+static bool bad_redir_trap(struct kvm_vcpu *vcpu,
+			   struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	/*
+	 * We really shouldn't be here, and this is likely the result
+	 * of a misconfigured trap, as this register should target the
+	 * corresponding EL1, and nothing else.
+	 */
+	return bad_trap(vcpu, p, r,
+			"trap of EL2 register redirected to EL1");
+}
+
 #define EL2_REG(name, acc, rst, v) {		\
 	SYS_DESC(SYS_##name),			\
 	.access = acc,				\
@@ -1894,6 +2044,9 @@ static unsigned int el2_visibility(const struct kvm_vcpu *vcpu,
 	.val = v,				\
 }
 
+#define EL2_REG_VNCR(name, rst, v)	EL2_REG(name, bad_vncr_trap, rst, v)
+#define EL2_REG_REDIR(name, rst, v)	EL2_REG(name, bad_redir_trap, rst, v)
+
 /*
  * EL{0,1}2 registers are the EL2 view on an EL0 or EL1 register when
  * HCR_EL2.E2H==1, and only in the sysreg table for convenience of
@@ -2508,32 +2661,33 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ PMU_SYS_REG(PMCCFILTR_EL0), .access = access_pmu_evtyper,
 	  .reset = reset_val, .reg = PMCCFILTR_EL0, .val = 0 },
 
-	EL2_REG(VPIDR_EL2, access_rw, reset_unknown, 0),
-	EL2_REG(VMPIDR_EL2, access_rw, reset_unknown, 0),
+	EL2_REG_VNCR(VPIDR_EL2, reset_unknown, 0),
+	EL2_REG_VNCR(VMPIDR_EL2, reset_unknown, 0),
 	EL2_REG(SCTLR_EL2, access_rw, reset_val, SCTLR_EL2_RES1),
 	EL2_REG(ACTLR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HCR_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(HCR_EL2, reset_val, 0),
 	EL2_REG(MDCR_EL2, access_rw, reset_val, 0),
 	EL2_REG(CPTR_EL2, access_rw, reset_val, CPTR_NVHE_EL2_RES1),
-	EL2_REG(HSTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HFGRTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HFGWTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HFGITR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HACR_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(HSTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HFGRTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HFGWTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HFGITR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HACR_EL2, reset_val, 0),
 
-	EL2_REG(HCRX_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(HCRX_EL2, reset_val, 0),
 
 	EL2_REG(TTBR0_EL2, access_rw, reset_val, 0),
 	EL2_REG(TTBR1_EL2, access_rw, reset_val, 0),
 	EL2_REG(TCR_EL2, access_rw, reset_val, TCR_EL2_RES1),
-	EL2_REG(VTTBR_EL2, access_rw, reset_val, 0),
-	EL2_REG(VTCR_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(VTTBR_EL2, reset_val, 0),
+	EL2_REG_VNCR(VTCR_EL2, reset_val, 0),
 
 	{ SYS_DESC(SYS_DACR32_EL2), trap_undef, reset_unknown, DACR32_EL2 },
-	EL2_REG(HDFGRTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HDFGWTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(SPSR_EL2, access_rw, reset_val, 0),
-	EL2_REG(ELR_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(HDFGRTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HDFGWTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HAFGRTR_EL2, reset_val, 0),
+	EL2_REG_REDIR(SPSR_EL2, reset_val, 0),
+	EL2_REG_REDIR(ELR_EL2, reset_val, 0),
 	{ SYS_DESC(SYS_SP_EL1), access_sp_el1},
 
 	/* AArch32 SPSR_* are RES0 if trapped from a NV guest */
@@ -2549,10 +2703,10 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_IFSR32_EL2), trap_undef, reset_unknown, IFSR32_EL2 },
 	EL2_REG(AFSR0_EL2, access_rw, reset_val, 0),
 	EL2_REG(AFSR1_EL2, access_rw, reset_val, 0),
-	EL2_REG(ESR_EL2, access_rw, reset_val, 0),
+	EL2_REG_REDIR(ESR_EL2, reset_val, 0),
 	{ SYS_DESC(SYS_FPEXC32_EL2), trap_undef, reset_val, FPEXC32_EL2, 0x700 },
 
-	EL2_REG(FAR_EL2, access_rw, reset_val, 0),
+	EL2_REG_REDIR(FAR_EL2, reset_val, 0),
 	EL2_REG(HPFAR_EL2, access_rw, reset_val, 0),
 
 	EL2_REG(MAIR_EL2, access_rw, reset_val, 0),
@@ -2565,24 +2719,9 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	EL2_REG(CONTEXTIDR_EL2, access_rw, reset_val, 0),
 	EL2_REG(TPIDR_EL2, access_rw, reset_val, 0),
 
-	EL2_REG(CNTVOFF_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(CNTVOFF_EL2, reset_val, 0),
 	EL2_REG(CNTHCTL_EL2, access_rw, reset_val, 0),
 
-	EL12_REG(SCTLR, access_vm_reg, reset_val, 0x00C50078),
-	EL12_REG(CPACR, access_rw, reset_val, 0),
-	EL12_REG(TTBR0, access_vm_reg, reset_unknown, 0),
-	EL12_REG(TTBR1, access_vm_reg, reset_unknown, 0),
-	EL12_REG(TCR, access_vm_reg, reset_val, 0),
-	{ SYS_DESC(SYS_SPSR_EL12), access_spsr},
-	{ SYS_DESC(SYS_ELR_EL12), access_elr},
-	EL12_REG(AFSR0, access_vm_reg, reset_unknown, 0),
-	EL12_REG(AFSR1, access_vm_reg, reset_unknown, 0),
-	EL12_REG(ESR, access_vm_reg, reset_unknown, 0),
-	EL12_REG(FAR, access_vm_reg, reset_unknown, 0),
-	EL12_REG(MAIR, access_vm_reg, reset_unknown, 0),
-	EL12_REG(AMAIR, access_vm_reg, reset_amair_el1, 0),
-	EL12_REG(VBAR, access_rw, reset_val, 0),
-	EL12_REG(CONTEXTIDR, access_vm_reg, reset_val, 0),
 	EL12_REG(CNTKCTL, access_rw, reset_val, 0),
 
 	EL2_REG(SP_EL2, NULL, reset_unknown, 0),
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/vgic/vgic-its.c linux-libre-6.8-gnu/arch/arm64/kvm/vgic/vgic-its.c
index 2dad2d095160..28a93074eca1 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/vgic/vgic-its.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/vgic/vgic-its.c
@@ -468,6 +468,9 @@ static int its_sync_lpi_pending_table(struct kvm_vcpu *vcpu)
 		}
 
 		irq = vgic_get_irq(vcpu->kvm, NULL, intids[i]);
+		if (!irq)
+			continue;
+
 		raw_spin_lock_irqsave(&irq->irq_lock, flags);
 		irq->pending_latch = pendmask & (1U << bit_nr);
 		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
@@ -590,7 +593,11 @@ static struct vgic_irq *vgic_its_check_cache(struct kvm *kvm, phys_addr_t db,
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
+
 	irq = __vgic_its_check_cache(dist, db, devid, eventid);
+	if (irq)
+		vgic_get_irq_kref(irq);
+
 	raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
 
 	return irq;
@@ -769,6 +776,7 @@ int vgic_its_inject_cached_translation(struct kvm *kvm, struct kvm_msi *msi)
 	raw_spin_lock_irqsave(&irq->irq_lock, flags);
 	irq->pending_latch = true;
 	vgic_queue_irq_unlock(kvm, irq, flags);
+	vgic_put_irq(kvm, irq);
 
 	return 0;
 }
@@ -1427,6 +1435,8 @@ static int vgic_its_cmd_handle_movall(struct kvm *kvm, struct vgic_its *its,
 
 	for (i = 0; i < irq_count; i++) {
 		irq = vgic_get_irq(kvm, NULL, intids[i]);
+		if (!irq)
+			continue;
 
 		update_affinity(irq, vcpu2);
 
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/vgic/vgic-mmio-v3.c linux-libre-6.8-gnu/arch/arm64/kvm/vgic/vgic-mmio-v3.c
index a764b0ab8bf9..c15ee1df036a 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/vgic/vgic-mmio-v3.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/vgic/vgic-mmio-v3.c
@@ -357,31 +357,13 @@ static int vgic_v3_uaccess_write_pending(struct kvm_vcpu *vcpu,
 					 gpa_t addr, unsigned int len,
 					 unsigned long val)
 {
-	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
-	int i;
-	unsigned long flags;
-
-	for (i = 0; i < len * 8; i++) {
-		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
-
-		raw_spin_lock_irqsave(&irq->irq_lock, flags);
-		if (test_bit(i, &val)) {
-			/*
-			 * pending_latch is set irrespective of irq type
-			 * (level or edge) to avoid dependency that VM should
-			 * restore irq config before pending info.
-			 */
-			irq->pending_latch = true;
-			vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
-		} else {
-			irq->pending_latch = false;
-			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
-		}
+	int ret;
 
-		vgic_put_irq(vcpu->kvm, irq);
-	}
+	ret = vgic_uaccess_write_spending(vcpu, addr, len, val);
+	if (ret)
+		return ret;
 
-	return 0;
+	return vgic_uaccess_write_cpending(vcpu, addr, len, ~val);
 }
 
 /* We want to avoid outer shareable. */
diff --git linux-libre-6.7-gnu/arch/arm64/kvm/vgic/vgic-mmio.c linux-libre-6.8-gnu/arch/arm64/kvm/vgic/vgic-mmio.c
index ff558c05e990..cf76523a2194 100644
--- linux-libre-6.7-gnu/arch/arm64/kvm/vgic/vgic-mmio.c
+++ linux-libre-6.8-gnu/arch/arm64/kvm/vgic/vgic-mmio.c
@@ -301,9 +301,8 @@ static bool is_vgic_v2_sgi(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
 		vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2);
 }
 
-void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
-			      gpa_t addr, unsigned int len,
-			      unsigned long val)
+static void __set_pending(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len,
+			  unsigned long val, bool is_user)
 {
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	int i;
@@ -312,14 +311,22 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
 	for_each_set_bit(i, &val, len * 8) {
 		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
 
-		/* GICD_ISPENDR0 SGI bits are WI */
-		if (is_vgic_v2_sgi(vcpu, irq)) {
+		/* GICD_ISPENDR0 SGI bits are WI when written from the guest. */
+		if (is_vgic_v2_sgi(vcpu, irq) && !is_user) {
 			vgic_put_irq(vcpu->kvm, irq);
 			continue;
 		}
 
 		raw_spin_lock_irqsave(&irq->irq_lock, flags);
 
+		/*
+		 * GICv2 SGIs are terribly broken. We can't restore
+		 * the source of the interrupt, so just pick the vcpu
+		 * itself as the source...
+		 */
+		if (is_vgic_v2_sgi(vcpu, irq))
+			irq->source |= BIT(vcpu->vcpu_id);
+
 		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
 			/* HW SGI? Ask the GIC to inject it */
 			int err;
@@ -335,7 +342,7 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
 		}
 
 		irq->pending_latch = true;
-		if (irq->hw)
+		if (irq->hw && !is_user)
 			vgic_irq_set_phys_active(irq, true);
 
 		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
@@ -343,33 +350,18 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
 	}
 }
 
+void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
+			      gpa_t addr, unsigned int len,
+			      unsigned long val)
+{
+	__set_pending(vcpu, addr, len, val, false);
+}
+
 int vgic_uaccess_write_spending(struct kvm_vcpu *vcpu,
 				gpa_t addr, unsigned int len,
 				unsigned long val)
 {
-	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
-	int i;
-	unsigned long flags;
-
-	for_each_set_bit(i, &val, len * 8) {
-		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
-
-		raw_spin_lock_irqsave(&irq->irq_lock, flags);
-		irq->pending_latch = true;
-
-		/*
-		 * GICv2 SGIs are terribly broken. We can't restore
-		 * the source of the interrupt, so just pick the vcpu
-		 * itself as the source...
-		 */
-		if (is_vgic_v2_sgi(vcpu, irq))
-			irq->source |= BIT(vcpu->vcpu_id);
-
-		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
-
-		vgic_put_irq(vcpu->kvm, irq);
-	}
-
+	__set_pending(vcpu, addr, len, val, true);
 	return 0;
 }
 
@@ -394,9 +386,9 @@ static void vgic_hw_irq_cpending(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
 		vgic_irq_set_phys_active(irq, false);
 }
 
-void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
-			      gpa_t addr, unsigned int len,
-			      unsigned long val)
+static void __clear_pending(struct kvm_vcpu *vcpu,
+			    gpa_t addr, unsigned int len,
+			    unsigned long val, bool is_user)
 {
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	int i;
@@ -405,14 +397,22 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 	for_each_set_bit(i, &val, len * 8) {
 		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
 
-		/* GICD_ICPENDR0 SGI bits are WI */
-		if (is_vgic_v2_sgi(vcpu, irq)) {
+		/* GICD_ICPENDR0 SGI bits are WI when written from the guest. */
+		if (is_vgic_v2_sgi(vcpu, irq) && !is_user) {
 			vgic_put_irq(vcpu->kvm, irq);
 			continue;
 		}
 
 		raw_spin_lock_irqsave(&irq->irq_lock, flags);
 
+		/*
+		 * More fun with GICv2 SGIs! If we're clearing one of them
+		 * from userspace, which source vcpu to clear? Let's not
+		 * even think of it, and blow the whole set.
+		 */
+		if (is_vgic_v2_sgi(vcpu, irq))
+			irq->source = 0;
+
 		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
 			/* HW SGI? Ask the GIC to clear its pending bit */
 			int err;
@@ -427,7 +427,7 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 			continue;
 		}
 
-		if (irq->hw)
+		if (irq->hw && !is_user)
 			vgic_hw_irq_cpending(vcpu, irq);
 		else
 			irq->pending_latch = false;
@@ -437,33 +437,18 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 	}
 }
 
+void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
+			      gpa_t addr, unsigned int len,
+			      unsigned long val)
+{
+	__clear_pending(vcpu, addr, len, val, false);
+}
+
 int vgic_uaccess_write_cpending(struct kvm_vcpu *vcpu,
 				gpa_t addr, unsigned int len,
 				unsigned long val)
 {
-	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
-	int i;
-	unsigned long flags;
-
-	for_each_set_bit(i, &val, len * 8) {
-		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
-
-		raw_spin_lock_irqsave(&irq->irq_lock, flags);
-		/*
-		 * More fun with GICv2 SGIs! If we're clearing one of them
-		 * from userspace, which source vcpu to clear? Let's not
-		 * even think of it, and blow the whole set.
-		 */
-		if (is_vgic_v2_sgi(vcpu, irq))
-			irq->source = 0;
-
-		irq->pending_latch = false;
-
-		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
-
-		vgic_put_irq(vcpu->kvm, irq);
-	}
-
+	__clear_pending(vcpu, addr, len, val, true);
 	return 0;
 }
 
diff --git linux-libre-6.7-gnu/arch/arm64/lib/copy_page.S linux-libre-6.8-gnu/arch/arm64/lib/copy_page.S
index c336d2ffdec5..6a56d7cf309d 100644
--- linux-libre-6.7-gnu/arch/arm64/lib/copy_page.S
+++ linux-libre-6.8-gnu/arch/arm64/lib/copy_page.S
@@ -18,13 +18,6 @@
  *	x1 - src
  */
 SYM_FUNC_START(__pi_copy_page)
-alternative_if ARM64_HAS_NO_HW_PREFETCH
-	// Prefetch three cache lines ahead.
-	prfm	pldl1strm, [x1, #128]
-	prfm	pldl1strm, [x1, #256]
-	prfm	pldl1strm, [x1, #384]
-alternative_else_nop_endif
-
 	ldp	x2, x3, [x1]
 	ldp	x4, x5, [x1, #16]
 	ldp	x6, x7, [x1, #32]
@@ -39,10 +32,6 @@ alternative_else_nop_endif
 1:
 	tst	x0, #(PAGE_SIZE - 1)
 
-alternative_if ARM64_HAS_NO_HW_PREFETCH
-	prfm	pldl1strm, [x1, #384]
-alternative_else_nop_endif
-
 	stnp	x2, x3, [x0, #-256]
 	ldp	x2, x3, [x1]
 	stnp	x4, x5, [x0, #16 - 256]
diff --git linux-libre-6.7-gnu/arch/arm64/mm/dma-mapping.c linux-libre-6.8-gnu/arch/arm64/mm/dma-mapping.c
index 3cb101e8cb29..61886e43e3a1 100644
--- linux-libre-6.7-gnu/arch/arm64/mm/dma-mapping.c
+++ linux-libre-6.8-gnu/arch/arm64/mm/dma-mapping.c
@@ -47,7 +47,7 @@ void arch_teardown_dma_ops(struct device *dev)
 #endif
 
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+			bool coherent)
 {
 	int cls = cache_line_size_of_cpu();
 
@@ -58,7 +58,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 		   ARCH_DMA_MINALIGN, cls);
 
 	dev->dma_coherent = coherent;
-	if (iommu)
+	if (device_iommu_mapped(dev))
 		iommu_setup_dma_ops(dev, dma_base, dma_base + size - 1);
 
 	xen_setup_dma_ops(dev);
diff --git linux-libre-6.7-gnu/arch/arm64/mm/hugetlbpage.c linux-libre-6.8-gnu/arch/arm64/mm/hugetlbpage.c
index f5aae342632c..8116ac599f80 100644
--- linux-libre-6.7-gnu/arch/arm64/mm/hugetlbpage.c
+++ linux-libre-6.8-gnu/arch/arm64/mm/hugetlbpage.c
@@ -51,7 +51,7 @@ void __init arm64_hugetlb_cma_reserve(void)
 	 * page allocator. Just warn if there is any change
 	 * breaking this assumption.
 	 */
-	WARN_ON(order <= MAX_ORDER);
+	WARN_ON(order <= MAX_PAGE_ORDER);
 	hugetlb_cma_reserve(order);
 }
 #endif /* CONFIG_CMA */
diff --git linux-libre-6.7-gnu/arch/arm64/mm/kasan_init.c linux-libre-6.8-gnu/arch/arm64/mm/kasan_init.c
index 555285ebd5af..4c7ad574b946 100644
--- linux-libre-6.7-gnu/arch/arm64/mm/kasan_init.c
+++ linux-libre-6.8-gnu/arch/arm64/mm/kasan_init.c
@@ -170,6 +170,11 @@ asmlinkage void __init kasan_early_init(void)
 {
 	BUILD_BUG_ON(KASAN_SHADOW_OFFSET !=
 		KASAN_SHADOW_END - (1UL << (64 - KASAN_SHADOW_SCALE_SHIFT)));
+	/*
+	 * We cannot check the actual value of KASAN_SHADOW_START during build,
+	 * as it depends on vabits_actual. As a best-effort approach, check
+	 * potential values calculated based on VA_BITS and VA_BITS_MIN.
+	 */
 	BUILD_BUG_ON(!IS_ALIGNED(_KASAN_SHADOW_START(VA_BITS), PGDIR_SIZE));
 	BUILD_BUG_ON(!IS_ALIGNED(_KASAN_SHADOW_START(VA_BITS_MIN), PGDIR_SIZE));
 	BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE));
diff --git linux-libre-6.7-gnu/arch/arm64/mm/mmu.c linux-libre-6.8-gnu/arch/arm64/mm/mmu.c
index 15f6347d23b6..1ac7467d34c9 100644
--- linux-libre-6.7-gnu/arch/arm64/mm/mmu.c
+++ linux-libre-6.8-gnu/arch/arm64/mm/mmu.c
@@ -52,9 +52,6 @@ u64 vabits_actual __ro_after_init = VA_BITS_MIN;
 EXPORT_SYMBOL(vabits_actual);
 #endif
 
-u64 kimage_vaddr __ro_after_init = (u64)&_text;
-EXPORT_SYMBOL(kimage_vaddr);
-
 u64 kimage_voffset __ro_after_init;
 EXPORT_SYMBOL(kimage_voffset);
 
@@ -674,6 +671,9 @@ static int __init map_entry_trampoline(void)
 {
 	int i;
 
+	if (!arm64_kernel_unmapped_at_el0())
+		return 0;
+
 	pgprot_t prot = kernel_exec_prot();
 	phys_addr_t pa_start = __pa_symbol(__entry_tramp_text_start);
 
diff --git linux-libre-6.7-gnu/arch/arm64/net/bpf_jit_comp.c linux-libre-6.8-gnu/arch/arm64/net/bpf_jit_comp.c
index 7d4af64e3982..8955da5c47cf 100644
--- linux-libre-6.7-gnu/arch/arm64/net/bpf_jit_comp.c
+++ linux-libre-6.8-gnu/arch/arm64/net/bpf_jit_comp.c
@@ -1828,7 +1828,7 @@ static void restore_args(struct jit_ctx *ctx, int args_off, int nregs)
  *
  */
 static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
-			      struct bpf_tramp_links *tlinks, void *orig_call,
+			      struct bpf_tramp_links *tlinks, void *func_addr,
 			      int nregs, u32 flags)
 {
 	int i;
@@ -1926,7 +1926,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 
 	if (flags & BPF_TRAMP_F_IP_ARG) {
 		/* save ip address of the traced function */
-		emit_addr_mov_i64(A64_R(10), (const u64)orig_call, ctx);
+		emit_addr_mov_i64(A64_R(10), (const u64)func_addr, ctx);
 		emit(A64_STR64I(A64_R(10), A64_SP, ip_off), ctx);
 	}
 
@@ -2026,18 +2026,10 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	return ctx->idx;
 }
 
-int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
-				void *image_end, const struct btf_func_model *m,
-				u32 flags, struct bpf_tramp_links *tlinks,
-				void *orig_call)
+static int btf_func_model_nregs(const struct btf_func_model *m)
 {
-	int i, ret;
 	int nregs = m->nr_args;
-	int max_insns = ((long)image_end - (long)image) / AARCH64_INSN_SIZE;
-	struct jit_ctx ctx = {
-		.image = NULL,
-		.idx = 0,
-	};
+	int i;
 
 	/* extra registers needed for struct argument */
 	for (i = 0; i < MAX_BPF_FUNC_ARGS; i++) {
@@ -2046,22 +2038,49 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
 			nregs += (m->arg_size[i] + 7) / 8 - 1;
 	}
 
+	return nregs;
+}
+
+int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags,
+			     struct bpf_tramp_links *tlinks, void *func_addr)
+{
+	struct jit_ctx ctx = {
+		.image = NULL,
+		.idx = 0,
+	};
+	struct bpf_tramp_image im;
+	int nregs, ret;
+
+	nregs = btf_func_model_nregs(m);
 	/* the first 8 registers are used for arguments */
 	if (nregs > 8)
 		return -ENOTSUPP;
 
-	ret = prepare_trampoline(&ctx, im, tlinks, orig_call, nregs, flags);
+	ret = prepare_trampoline(&ctx, &im, tlinks, func_addr, nregs, flags);
 	if (ret < 0)
 		return ret;
 
-	if (ret > max_insns)
-		return -EFBIG;
+	return ret < 0 ? ret : ret * AARCH64_INSN_SIZE;
+}
 
-	ctx.image = image;
-	ctx.idx = 0;
+int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
+				void *image_end, const struct btf_func_model *m,
+				u32 flags, struct bpf_tramp_links *tlinks,
+				void *func_addr)
+{
+	int ret, nregs;
+	struct jit_ctx ctx = {
+		.image = image,
+		.idx = 0,
+	};
+
+	nregs = btf_func_model_nregs(m);
+	/* the first 8 registers are used for arguments */
+	if (nregs > 8)
+		return -ENOTSUPP;
 
 	jit_fill_hole(image, (unsigned int)(image_end - image));
-	ret = prepare_trampoline(&ctx, im, tlinks, orig_call, nregs, flags);
+	ret = prepare_trampoline(&ctx, im, tlinks, func_addr, nregs, flags);
 
 	if (ret > 0 && validate_code(&ctx) < 0)
 		ret = -EINVAL;
diff --git linux-libre-6.7-gnu/arch/arm64/tools/cpucaps linux-libre-6.8-gnu/arch/arm64/tools/cpucaps
index b98c38288a9d..b912b1409fc0 100644
--- linux-libre-6.7-gnu/arch/arm64/tools/cpucaps
+++ linux-libre-6.8-gnu/arch/arm64/tools/cpucaps
@@ -37,10 +37,10 @@ HAS_GIC_PRIO_MASKING
 HAS_GIC_PRIO_RELAXED_SYNC
 HAS_HCX
 HAS_LDAPR
+HAS_LPA2
 HAS_LSE_ATOMICS
 HAS_MOPS
 HAS_NESTED_VIRT
-HAS_NO_HW_PREFETCH
 HAS_PAN
 HAS_S1PIE
 HAS_RAS_EXTN
@@ -84,7 +84,6 @@ WORKAROUND_2077057
 WORKAROUND_2457168
 WORKAROUND_2645198
 WORKAROUND_2658417
-WORKAROUND_2966298
 WORKAROUND_AMPERE_AC03_CPU_38
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
@@ -100,3 +99,4 @@ WORKAROUND_NVIDIA_CARMEL_CNP
 WORKAROUND_QCOM_FALKOR_E1003
 WORKAROUND_REPEAT_TLBI
 WORKAROUND_SPECULATIVE_AT
+WORKAROUND_SPECULATIVE_UNPRIV_LOAD
diff --git linux-libre-6.7-gnu/arch/arm64/tools/sysreg linux-libre-6.8-gnu/arch/arm64/tools/sysreg
index 96cbeeab4eec..4c9b67934367 100644
--- linux-libre-6.7-gnu/arch/arm64/tools/sysreg
+++ linux-libre-6.8-gnu/arch/arm64/tools/sysreg
@@ -1002,6 +1002,27 @@ UnsignedEnum	3:0	BT
 EndEnum
 EndSysreg
 
+Sysreg	ID_AA64PFR2_EL1	3	0	0	4	2
+Res0	63:36
+UnsignedEnum	35:32	FPMR
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	31:12
+UnsignedEnum	11:8	MTEFAR
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	MTESTOREONLY
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	MTEPERM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
 Sysreg	ID_AA64ZFR0_EL1	3	0	0	4	4
 Res0	63:60
 UnsignedEnum	59:56	F64MM
@@ -1058,7 +1079,11 @@ UnsignedEnum	63	FA64
 	0b0	NI
 	0b1	IMP
 EndEnum
-Res0	62:60
+Res0	62:61
+UnsignedEnum	60	LUTv2
+	0b0	NI
+	0b1	IMP
+EndEnum
 UnsignedEnum	59:56	SMEver
 	0b0000	SME
 	0b0001	SME2
@@ -1086,7 +1111,14 @@ UnsignedEnum	42	F16F16
 	0b0	NI
 	0b1	IMP
 EndEnum
-Res0	41:40
+UnsignedEnum	41	F8F16
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	40	F8F32
+	0b0	NI
+	0b1	IMP
+EndEnum
 UnsignedEnum	39:36	I8I32
 	0b0000	NI
 	0b1111	IMP
@@ -1107,7 +1139,49 @@ UnsignedEnum	32	F32F32
 	0b0	NI
 	0b1	IMP
 EndEnum
-Res0	31:0
+Res0	31
+UnsignedEnum	30	SF8FMA
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	29	SF8DP4
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	28	SF8DP2
+	0b0	NI
+	0b1	IMP
+EndEnum
+Res0	27:0
+EndSysreg
+
+Sysreg	ID_AA64FPFR0_EL1	3	0	0	4	7
+Res0	63:32
+UnsignedEnum	31	F8CVT
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	30	F8FMA
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	29	F8DP4
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	28	F8DP2
+	0b0	NI
+	0b1	IMP
+EndEnum
+Res0	27:2
+UnsignedEnum	1	F8E4M3
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	0	F8E5M2
+	0b0	NI
+	0b1	IMP
+EndEnum
 EndSysreg
 
 Sysreg	ID_AA64DFR0_EL1	3	0	0	5	0
@@ -1115,7 +1189,10 @@ Enum	63:60	HPMN0
 	0b0000	UNPREDICTABLE
 	0b0001	DEF
 EndEnum
-Res0	59:56
+UnsignedEnum	59:56	ExtTrcBuff
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	55:52	BRBE
 	0b0000	NI
 	0b0001	IMP
@@ -1327,6 +1404,7 @@ UnsignedEnum	11:8	API
 	0b0011	PAuth2
 	0b0100	FPAC
 	0b0101	FPACCOMBINE
+	0b0110	PAuth_LR
 EndEnum
 UnsignedEnum	7:4	APA
 	0b0000	NI
@@ -1335,6 +1413,7 @@ UnsignedEnum	7:4	APA
 	0b0011	PAuth2
 	0b0100	FPAC
 	0b0101	FPACCOMBINE
+	0b0110	PAuth_LR
 EndEnum
 UnsignedEnum	3:0	DPB
 	0b0000	NI
@@ -1344,7 +1423,14 @@ EndEnum
 EndSysreg
 
 Sysreg	ID_AA64ISAR2_EL1	3	0	0	6	2
-Res0	63:56
+UnsignedEnum	63:60	ATS1A
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	59:56	LUT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	55:52	CSSC
 	0b0000	NI
 	0b0001	IMP
@@ -1353,7 +1439,19 @@ UnsignedEnum	51:48	RPRFM
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-Res0	47:32
+Res0	47:44
+UnsignedEnum	43:40	PRFMSLC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	39:36	SYSINSTR_128
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	35:32	SYSREG_128
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	31:28	CLRBHB
 	0b0000	NI
 	0b0001	IMP
@@ -1377,6 +1475,7 @@ UnsignedEnum	15:12	APA3
 	0b0011	PAuth2
 	0b0100	FPAC
 	0b0101	FPACCOMBINE
+	0b0110	PAuth_LR
 EndEnum
 UnsignedEnum	11:8	GPA3
 	0b0000	NI
@@ -1392,6 +1491,23 @@ UnsignedEnum	3:0	WFxT
 EndEnum
 EndSysreg
 
+Sysreg	ID_AA64ISAR3_EL1	3	0	0	6	3
+Res0	63:12
+UnsignedEnum	11:8	TLBIW
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	FAMINMAX
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	CPA
+	0b0000	NI
+	0b0001	IMP
+	0b0010	CPA2
+EndEnum
+EndSysreg
+
 Sysreg	ID_AA64MMFR0_EL1	3	0	0	7	0
 UnsignedEnum	63:60	ECV
 	0b0000	NI
@@ -1680,7 +1796,8 @@ Field	63	TIDCP
 Field	62	SPINTMASK
 Field	61	NMI
 Field	60	EnTP2
-Res0	59:58
+Field	59	TCSO
+Field	58	TCSO0
 Field	57	EPAN
 Field	56	EnALS
 Field	55	EnAS0
@@ -1709,7 +1826,7 @@ EndEnum
 Field	37	ITFSB
 Field	36	BT1
 Field	35	BT0
-Res0	34
+Field	34	EnFPM
 Field	33	MSCEn
 Field	32	CMOW
 Field	31	EnIA
@@ -1747,7 +1864,8 @@ Field	0	M
 EndSysreg
 
 SysregFields	CPACR_ELx
-Res0	63:29
+Res0	63:30
+Field	29	E0POE
 Field	28	TTA
 Res0	27:26
 Field	25:24	SMEN
@@ -1790,6 +1908,41 @@ Sysreg	SMCR_EL1	3	0	1	2	6
 Fields	SMCR_ELx
 EndSysreg
 
+SysregFields	GCSCR_ELx
+Res0	63:10
+Field	9	STREn
+Field	8	PUSHMEn
+Res0	7
+Field	6	EXLOCKEN
+Field	5	RVCHKEN
+Res0	4:1
+Field	0	PCRSEL
+EndSysregFields
+
+Sysreg	GCSCR_EL1	3	0	2	5	0
+Fields	GCSCR_ELx
+EndSysreg
+
+SysregFields	GCSPR_ELx
+Field	63:3	PTR
+Res0	2:0
+EndSysregFields
+
+Sysreg	GCSPR_EL1	3	0	2	5	1
+Fields	GCSPR_ELx
+EndSysreg
+
+Sysreg	GCSCRE0_EL1	3	0	2	5	2
+Res0	63:11
+Field	10	nTR
+Field	9	STREn
+Field	8	PUSHMEn
+Res0	7:6
+Field	5	RVCHKEN
+Res0	4:1
+Field	0	PCRSEL
+EndSysreg
+
 Sysreg	ALLINT	3	0	4	3	0
 Res0	63:14
 Field	13	ALLINT
@@ -1933,10 +2086,18 @@ Sysreg	CONTEXTIDR_EL1	3	0	13	0	1
 Fields	CONTEXTIDR_ELx
 EndSysreg
 
+Sysreg	RCWSMASK_EL1	3	0	13	0	3
+Field	63:0	RCWSMASK
+EndSysreg
+
 Sysreg	TPIDR_EL1	3	0	13	0	4
 Field	63:0	ThreadID
 EndSysreg
 
+Sysreg	RCWMASK_EL1	3	0	13	0	6
+Field	63:0	RCWMASK
+EndSysreg
+
 Sysreg	SCXTNUM_EL1	3	0	13	0	7
 Field	63:0	SoftwareContextNumber
 EndSysreg
@@ -2004,9 +2165,10 @@ Field	27:24	CWG
 Field	23:20	ERG
 Field	19:16	DminLine
 Enum	15:14	L1Ip
-	0b00	VPIPT
+	# This was named as VPIPT in the ARM but now documented as reserved
+	0b00	RESERVED_VPIPT
 	# This is named as AIVIVT in the ARM but documented as reserved
-	0b01	RESERVED
+	0b01	RESERVED_AIVIVT
 	0b10	VIPT
 	0b11	PIPT
 EndEnum
@@ -2020,12 +2182,39 @@ Field	4	DZP
 Field	3:0	BS
 EndSysreg
 
+Sysreg	GCSPR_EL0	3	3	2	5	1
+Fields	GCSPR_ELx
+EndSysreg
+
 Sysreg	SVCR	3	3	4	2	2
 Res0	63:2
 Field	1	ZA
 Field	0	SM
 EndSysreg
 
+Sysreg	FPMR	3	3	4	4	2
+Res0	63:38
+Field	37:32	LSCALE2
+Field	31:24	NSCALE
+Res0	23
+Field	22:16	LSCALE
+Field	15	OSC
+Field	14	OSM
+Res0	13:9
+UnsignedEnum	8:6	F8D
+	0b000	E5M2
+	0b001	E4M3
+EndEnum
+UnsignedEnum	5:3	F8S2
+	0b000	E5M2
+	0b001	E4M3
+EndEnum
+UnsignedEnum	2:0	F8S1
+	0b000	E5M2
+	0b001	E4M3
+EndEnum
+EndSysreg
+
 SysregFields	HFGxTR_EL2
 Field	63	nAMAIR2_EL1
 Field	62	nMAIR2_EL1
@@ -2102,7 +2291,9 @@ Fields	HFGxTR_EL2
 EndSysreg
 
 Sysreg HFGITR_EL2	3	4	1	1	6
-Res0	63:61
+Res0	63
+Field	62	ATS1E1A
+Res0	61
 Field	60	COSPRCTX
 Field	59	nGCSEPP
 Field	58	nGCSSTR_EL1
@@ -2295,12 +2486,57 @@ Field	1	DBGBVRn_EL1
 Field	0	DBGBCRn_EL1
 EndSysreg
 
+Sysreg HAFGRTR_EL2	3	4	3	1	6
+Res0	63:50
+Field	49	AMEVTYPER115_EL0
+Field	48	AMEVCNTR115_EL0
+Field	47	AMEVTYPER114_EL0
+Field	46	AMEVCNTR114_EL0
+Field	45	AMEVTYPER113_EL0
+Field	44	AMEVCNTR113_EL0
+Field	43	AMEVTYPER112_EL0
+Field	42	AMEVCNTR112_EL0
+Field	41	AMEVTYPER111_EL0
+Field	40	AMEVCNTR111_EL0
+Field	39	AMEVTYPER110_EL0
+Field	38	AMEVCNTR110_EL0
+Field	37	AMEVTYPER19_EL0
+Field	36	AMEVCNTR19_EL0
+Field	35	AMEVTYPER18_EL0
+Field	34	AMEVCNTR18_EL0
+Field	33	AMEVTYPER17_EL0
+Field	32	AMEVCNTR17_EL0
+Field	31	AMEVTYPER16_EL0
+Field	30	AMEVCNTR16_EL0
+Field	29	AMEVTYPER15_EL0
+Field	28	AMEVCNTR15_EL0
+Field	27	AMEVTYPER14_EL0
+Field	26	AMEVCNTR14_EL0
+Field	25	AMEVTYPER13_EL0
+Field	24	AMEVCNTR13_EL0
+Field	23	AMEVTYPER12_EL0
+Field	22	AMEVCNTR12_EL0
+Field	21	AMEVTYPER11_EL0
+Field	20	AMEVCNTR11_EL0
+Field	19	AMEVTYPER10_EL0
+Field	18	AMEVCNTR10_EL0
+Field	17	AMCNTEN1
+Res0	16:5
+Field	4	AMEVCNTR03_EL0
+Field	3	AMEVCNTR02_EL0
+Field	2	AMEVCNTR01_EL0
+Field	1	AMEVCNTR00_EL0
+Field	0	AMCNTEN0
+EndSysreg
+
 Sysreg	ZCR_EL2	3	4	1	2	0
 Fields	ZCR_ELx
 EndSysreg
 
 Sysreg	HCRX_EL2	3	4	1	2	2
-Res0	63:23
+Res0	63:25
+Field	24	PACMEn
+Field	23	EnFPM
 Field	22	GCSEn
 Field	21	EnIDCP128
 Field	20	EnSDERR
@@ -2348,6 +2584,14 @@ Sysreg	SMCR_EL2	3	4	1	2	6
 Fields	SMCR_ELx
 EndSysreg
 
+Sysreg	GCSCR_EL2	3	4	2	5	0
+Fields	GCSCR_ELx
+EndSysreg
+
+Sysreg	GCSPR_EL2	3	4	2	5	1
+Fields	GCSPR_ELx
+EndSysreg
+
 Sysreg	DACR32_EL2	3	4	3	0	0
 Res0	63:32
 Field	31:30	D15
@@ -2407,6 +2651,14 @@ Sysreg	SMCR_EL12	3	5	1	2	6
 Fields	SMCR_ELx
 EndSysreg
 
+Sysreg	GCSCR_EL12	3	5	2	5	0
+Fields	GCSCR_ELx
+EndSysreg
+
+Sysreg	GCSPR_EL12	3	5	2	5	1
+Fields	GCSPR_ELx
+EndSysreg
+
 Sysreg	FAR_EL12	3	5	6	0	0
 Field	63:0	ADDR
 EndSysreg
@@ -2471,6 +2723,33 @@ Field	1	PIE
 Field	0	PnCH
 EndSysreg
 
+SysregFields MAIR2_ELx
+Field	63:56	Attr7
+Field	55:48	Attr6
+Field	47:40	Attr5
+Field	39:32	Attr4
+Field	31:24	Attr3
+Field	23:16	Attr2
+Field	15:8	Attr1
+Field	7:0	Attr0
+EndSysregFields
+
+Sysreg	MAIR2_EL1	3	0	10	2	1
+Fields	MAIR2_ELx
+EndSysreg
+
+Sysreg	MAIR2_EL2	3	4	10	1	1
+Fields	MAIR2_ELx
+EndSysreg
+
+Sysreg	AMAIR2_EL1	3	0	10	3	1
+Field	63:0	ImpDef
+EndSysreg
+
+Sysreg	AMAIR2_EL2	3	4	10	3	1
+Field	63:0	ImpDef
+EndSysreg
+
 SysregFields PIRx_ELx
 Field	63:60	Perm15
 Field	59:56	Perm14
@@ -2510,6 +2789,26 @@ Sysreg	PIR_EL2		3	4	10	2	3
 Fields	PIRx_ELx
 EndSysreg
 
+Sysreg	POR_EL0		3	3	10	2	4
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	POR_EL1		3	0	10	2	4
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	POR_EL12	3	5	10	2	4
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	S2POR_EL1	3	0	10	2	5
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	S2PIR_EL2	3	4	10	2	5
+Fields	PIRx_ELx
+EndSysreg
+
 Sysreg	LORSA_EL1	3	0	10	4	0
 Res0	63:52
 Field	51:16	SA
diff --git linux-libre-6.7-gnu/arch/csky/abiv1/inc/abi/cacheflush.h linux-libre-6.8-gnu/arch/csky/abiv1/inc/abi/cacheflush.h
index 908d8b0bc4fd..d011a81575d2 100644
--- linux-libre-6.7-gnu/arch/csky/abiv1/inc/abi/cacheflush.h
+++ linux-libre-6.8-gnu/arch/csky/abiv1/inc/abi/cacheflush.h
@@ -43,6 +43,7 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
  */
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
 #define flush_cache_vmap(start, end)		cache_wbinv_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		cache_wbinv_all()
 
 #define flush_icache_range(start, end)		cache_wbinv_range(start, end)
diff --git linux-libre-6.7-gnu/arch/csky/abiv2/inc/abi/cacheflush.h linux-libre-6.8-gnu/arch/csky/abiv2/inc/abi/cacheflush.h
index 40be16907267..6513ac5d2578 100644
--- linux-libre-6.7-gnu/arch/csky/abiv2/inc/abi/cacheflush.h
+++ linux-libre-6.8-gnu/arch/csky/abiv2/inc/abi/cacheflush.h
@@ -41,6 +41,7 @@ void flush_icache_mm_range(struct mm_struct *mm,
 void flush_icache_deferred(struct mm_struct *mm);
 
 #define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		do { } while (0)
 
 #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
diff --git linux-libre-6.7-gnu/arch/csky/configs/defconfig linux-libre-6.8-gnu/arch/csky/configs/defconfig
index af722e4dfb47..ff559e5162aa 100644
--- linux-libre-6.7-gnu/arch/csky/configs/defconfig
+++ linux-libre-6.8-gnu/arch/csky/configs/defconfig
@@ -34,7 +34,8 @@ CONFIG_GENERIC_PHY=y
 CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA=y
-CONFIG_FSCACHE=m
+CONFIG_NETFS_SUPPORT=m
+CONFIG_FSCACHE=y
 CONFIG_FSCACHE_STATS=y
 CONFIG_CACHEFILES=m
 CONFIG_MSDOS_FS=y
diff --git linux-libre-6.7-gnu/arch/csky/include/asm/ftrace.h linux-libre-6.8-gnu/arch/csky/include/asm/ftrace.h
index 9b86341731b6..fd215c38ef27 100644
--- linux-libre-6.7-gnu/arch/csky/include/asm/ftrace.h
+++ linux-libre-6.8-gnu/arch/csky/include/asm/ftrace.h
@@ -26,5 +26,9 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr)
 
 struct dyn_arch_ftrace {
 };
+
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
+			   unsigned long frame_pointer);
+
 #endif /* !__ASSEMBLY__ */
 #endif /* __ASM_CSKY_FTRACE_H */
diff --git linux-libre-6.7-gnu/arch/csky/include/asm/irq_work.h linux-libre-6.8-gnu/arch/csky/include/asm/irq_work.h
index 33aaf39d6f94..d39fcc1f5395 100644
--- linux-libre-6.7-gnu/arch/csky/include/asm/irq_work.h
+++ linux-libre-6.8-gnu/arch/csky/include/asm/irq_work.h
@@ -7,5 +7,5 @@ static inline bool arch_irq_work_has_interrupt(void)
 {
 	return true;
 }
-extern void arch_irq_work_raise(void);
+
 #endif /* __ASM_CSKY_IRQ_WORK_H */
diff --git linux-libre-6.7-gnu/arch/csky/include/asm/jump_label.h linux-libre-6.8-gnu/arch/csky/include/asm/jump_label.h
index d488ba6084bc..ef2e37a10a0f 100644
--- linux-libre-6.7-gnu/arch/csky/include/asm/jump_label.h
+++ linux-libre-6.8-gnu/arch/csky/include/asm/jump_label.h
@@ -12,7 +12,7 @@
 static __always_inline bool arch_static_branch(struct static_key *key,
 					       bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	nop32					\n"
 		"	.pushsection	__jump_table, \"aw\"	\n"
 		"	.align		2			\n"
@@ -29,7 +29,7 @@ label:
 static __always_inline bool arch_static_branch_jump(struct static_key *key,
 						    bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	bsr32		%l[label]		\n"
 		"	.pushsection	__jump_table, \"aw\"	\n"
 		"	.align		2			\n"
@@ -43,5 +43,10 @@ label:
 	return true;
 }
 
+enum jump_label_type;
+void arch_jump_label_transform_static(struct jump_entry *entry,
+				      enum jump_label_type type);
+#define arch_jump_label_transform_static arch_jump_label_transform_static
+
 #endif  /* __ASSEMBLY__ */
 #endif	/* __ASM_CSKY_JUMP_LABEL_H */
diff --git linux-libre-6.7-gnu/arch/csky/include/asm/traps.h linux-libre-6.8-gnu/arch/csky/include/asm/traps.h
index 732c4aaa2e26..6bbbbe43165f 100644
--- linux-libre-6.7-gnu/arch/csky/include/asm/traps.h
+++ linux-libre-6.8-gnu/arch/csky/include/asm/traps.h
@@ -55,6 +55,6 @@ asmlinkage void trap_c(struct pt_regs *regs);
 asmlinkage void do_notify_resume(struct pt_regs *regs,
 			unsigned long thread_info_flags);
 
-void trap_init(void);
+asmlinkage void do_page_fault(struct pt_regs *regs);
 
 #endif /* __ASM_CSKY_TRAPS_H */
diff --git linux-libre-6.7-gnu/arch/csky/kernel/traps.c linux-libre-6.8-gnu/arch/csky/kernel/traps.c
index 6e426fba0119..c2246b07cc9c 100644
--- linux-libre-6.7-gnu/arch/csky/kernel/traps.c
+++ linux-libre-6.8-gnu/arch/csky/kernel/traps.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
 
+#include <linux/cpu.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/kernel.h>
diff --git linux-libre-6.7-gnu/arch/csky/kernel/vdso/vgettimeofday.c linux-libre-6.8-gnu/arch/csky/kernel/vdso/vgettimeofday.c
index c4831145eed5..55af30e83752 100644
--- linux-libre-6.7-gnu/arch/csky/kernel/vdso/vgettimeofday.c
+++ linux-libre-6.8-gnu/arch/csky/kernel/vdso/vgettimeofday.c
@@ -2,36 +2,27 @@
 
 #include <linux/time.h>
 #include <linux/types.h>
+#include <vdso/gettime.h>
 
 extern
-int __vdso_clock_gettime(clockid_t clock,
-			 struct old_timespec32 *ts);
 int __vdso_clock_gettime(clockid_t clock,
 			 struct old_timespec32 *ts)
 {
 	return __cvdso_clock_gettime32(clock, ts);
 }
 
-int __vdso_clock_gettime64(clockid_t clock,
-			   struct __kernel_timespec *ts);
 int __vdso_clock_gettime64(clockid_t clock,
 			   struct __kernel_timespec *ts)
 {
 	return __cvdso_clock_gettime(clock, ts);
 }
 
-extern
-int __vdso_gettimeofday(struct __kernel_old_timeval *tv,
-			struct timezone *tz);
 int __vdso_gettimeofday(struct __kernel_old_timeval *tv,
 			struct timezone *tz)
 {
 	return __cvdso_gettimeofday(tv, tz);
 }
 
-extern
-int __vdso_clock_getres(clockid_t clock_id,
-			struct old_timespec32 *res);
 int __vdso_clock_getres(clockid_t clock_id,
 			struct old_timespec32 *res)
 {
diff --git linux-libre-6.7-gnu/arch/hexagon/include/asm/io.h linux-libre-6.8-gnu/arch/hexagon/include/asm/io.h
index e2b308e32a37..522d321ea85a 100644
--- linux-libre-6.7-gnu/arch/hexagon/include/asm/io.h
+++ linux-libre-6.8-gnu/arch/hexagon/include/asm/io.h
@@ -58,12 +58,6 @@ static inline void *phys_to_virt(unsigned long address)
 	return __va(address);
 }
 
-/*
- * convert a physical pointer to a virtual kernel pointer for
- * /dev/mem access.
- */
-#define xlate_dev_mem_ptr(p)    __va(p)
-
 /*
  * IO port access primitives.  Hexagon doesn't have special IO access
  * instructions; all I/O is memory mapped.
@@ -174,9 +168,6 @@ static inline void writel(u32 data, volatile void __iomem *addr)
 #define _PAGE_IOREMAP (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
 		       (__HEXAGON_C_DEV << 6))
 
-#define ioremap_uc(addr, size) ioremap((addr), (size))
-
-
 #define __raw_writel writel
 
 static inline void memcpy_fromio(void *dst, const volatile void __iomem *src,
diff --git linux-libre-6.7-gnu/arch/hexagon/include/asm/irq.h linux-libre-6.8-gnu/arch/hexagon/include/asm/irq.h
index 1f7f1292f701..a60d26754caa 100644
--- linux-libre-6.7-gnu/arch/hexagon/include/asm/irq.h
+++ linux-libre-6.8-gnu/arch/hexagon/include/asm/irq.h
@@ -20,4 +20,7 @@
 
 #include <asm-generic/irq.h>
 
+struct pt_regs;
+void arch_do_IRQ(struct pt_regs *);
+
 #endif
diff --git linux-libre-6.7-gnu/arch/hexagon/include/asm/page.h linux-libre-6.8-gnu/arch/hexagon/include/asm/page.h
index 9c03b9965f07..10f1bc07423c 100644
--- linux-libre-6.7-gnu/arch/hexagon/include/asm/page.h
+++ linux-libre-6.8-gnu/arch/hexagon/include/asm/page.h
@@ -78,6 +78,9 @@ typedef struct page *pgtable_t;
 #define __pgd(x)       ((pgd_t) { (x) })
 #define __pgprot(x)    ((pgprot_t) { (x) })
 
+/* Needed for PAGE_OFFSET used in the macro right below */
+#include <asm/mem-layout.h>
+
 /*
  * We need a __pa and a __va routine for kernel space.
  * MIPS says they're only used during mem_init.
@@ -125,8 +128,16 @@ static inline void clear_page(void *page)
  */
 #define page_to_phys(page)      (page_to_pfn(page) << PAGE_SHIFT)
 
-#define virt_to_pfn(kaddr)      (__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn)        __va((pfn) << PAGE_SHIFT)
+static inline unsigned long virt_to_pfn(const void *kaddr)
+{
+	return __pa(kaddr) >> PAGE_SHIFT;
+}
+
+static inline void *pfn_to_virt(unsigned long pfn)
+{
+	return (void *)((unsigned long)__va(pfn) << PAGE_SHIFT);
+}
+
 
 #define page_to_virt(page)	__va(page_to_phys(page))
 
diff --git linux-libre-6.7-gnu/arch/hexagon/include/uapi/asm/user.h linux-libre-6.8-gnu/arch/hexagon/include/uapi/asm/user.h
index 7327ec59b22f..abae6a4b5813 100644
--- linux-libre-6.7-gnu/arch/hexagon/include/uapi/asm/user.h
+++ linux-libre-6.8-gnu/arch/hexagon/include/uapi/asm/user.h
@@ -56,15 +56,10 @@ struct user_regs_struct {
 	unsigned long pc;
 	unsigned long cause;
 	unsigned long badva;
-#if CONFIG_HEXAGON_ARCH_VERSION < 4
-	unsigned long pad1;  /* pad out to 48 words total */
-	unsigned long pad2;  /* pad out to 48 words total */
-	unsigned long pad3;  /* pad out to 48 words total */
-#else
+	/* cs0 and cs1 are only available with HEXAGON_ARCH_VERSION >= 4 */
 	unsigned long cs0;
 	unsigned long cs1;
 	unsigned long pad1;  /* pad out to 48 words total */
-#endif
 };
 
 #endif
diff --git linux-libre-6.7-gnu/arch/hexagon/kernel/process.c linux-libre-6.8-gnu/arch/hexagon/kernel/process.c
index dd7f74ea2c20..2a77bfd75694 100644
--- linux-libre-6.7-gnu/arch/hexagon/kernel/process.c
+++ linux-libre-6.8-gnu/arch/hexagon/kernel/process.c
@@ -5,6 +5,7 @@
  * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
  */
 
+#include <linux/cpu.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
 #include <linux/sched/task.h>
@@ -152,6 +153,7 @@ unsigned long __get_wchan(struct task_struct *p)
  * Returns 0 if there's no need to re-check for more work.
  */
 
+int do_work_pending(struct pt_regs *regs, u32 thread_info_flags);
 int do_work_pending(struct pt_regs *regs, u32 thread_info_flags)
 {
 	if (!(thread_info_flags & _TIF_WORK_MASK)) {
diff --git linux-libre-6.7-gnu/arch/hexagon/kernel/ptrace.c linux-libre-6.8-gnu/arch/hexagon/kernel/ptrace.c
index 125f19995b76..905b06790ab7 100644
--- linux-libre-6.7-gnu/arch/hexagon/kernel/ptrace.c
+++ linux-libre-6.8-gnu/arch/hexagon/kernel/ptrace.c
@@ -74,7 +74,7 @@ static int genregs_set(struct task_struct *target,
 		   unsigned int pos, unsigned int count,
 		   const void *kbuf, const void __user *ubuf)
 {
-	int ret;
+	int ret, ignore_offset;
 	unsigned long bucket;
 	struct pt_regs *regs = task_pt_regs(target);
 
@@ -111,12 +111,15 @@ static int genregs_set(struct task_struct *target,
 #if CONFIG_HEXAGON_ARCH_VERSION >=4
 	INEXT(&regs->cs0, cs0);
 	INEXT(&regs->cs1, cs1);
+	ignore_offset = offsetof(struct user_regs_struct, pad1);
+#else
+	ignore_offset = offsetof(struct user_regs_struct, cs0);
 #endif
 
 	/* Ignore the rest, if needed */
 	if (!ret)
 		user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-			offsetof(struct user_regs_struct, pad1), -1);
+					  ignore_offset, -1);
 	else
 		return ret;
 
diff --git linux-libre-6.7-gnu/arch/hexagon/kernel/reset.c linux-libre-6.8-gnu/arch/hexagon/kernel/reset.c
index da36114d928f..efd70a8d2526 100644
--- linux-libre-6.7-gnu/arch/hexagon/kernel/reset.c
+++ linux-libre-6.8-gnu/arch/hexagon/kernel/reset.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  */
 
+#include <linux/reboot.h>
 #include <linux/smp.h>
 #include <asm/hexagon_vm.h>
 
diff --git linux-libre-6.7-gnu/arch/hexagon/kernel/signal.c linux-libre-6.8-gnu/arch/hexagon/kernel/signal.c
index bcba31e9e0ae..d301f4621553 100644
--- linux-libre-6.7-gnu/arch/hexagon/kernel/signal.c
+++ linux-libre-6.8-gnu/arch/hexagon/kernel/signal.c
@@ -220,7 +220,7 @@ no_restart:
  * Architecture-specific wrappers for signal-related system calls
  */
 
-asmlinkage int sys_rt_sigreturn(void)
+SYSCALL_DEFINE0(rt_sigreturn)
 {
 	struct pt_regs *regs = current_pt_regs();
 	struct rt_sigframe __user *frame;
diff --git linux-libre-6.7-gnu/arch/hexagon/kernel/smp.c linux-libre-6.8-gnu/arch/hexagon/kernel/smp.c
index 4e8bee25b8c6..608884bc3396 100644
--- linux-libre-6.7-gnu/arch/hexagon/kernel/smp.c
+++ linux-libre-6.8-gnu/arch/hexagon/kernel/smp.c
@@ -79,7 +79,7 @@ void smp_vm_unmask_irq(void *info)
  * Specifically, first arg is irq, second is the irq_desc.
  */
 
-irqreturn_t handle_ipi(int irq, void *desc)
+static irqreturn_t handle_ipi(int irq, void *desc)
 {
 	int cpu = smp_processor_id();
 	struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
@@ -124,7 +124,7 @@ void __init smp_prepare_boot_cpu(void)
  * to point to current thread info
  */
 
-void start_secondary(void)
+static void start_secondary(void)
 {
 	unsigned long thread_ptr;
 	unsigned int cpu, irq;
diff --git linux-libre-6.7-gnu/arch/hexagon/kernel/time.c linux-libre-6.8-gnu/arch/hexagon/kernel/time.c
index febc95714d75..f0f207e2a694 100644
--- linux-libre-6.7-gnu/arch/hexagon/kernel/time.c
+++ linux-libre-6.8-gnu/arch/hexagon/kernel/time.c
@@ -17,7 +17,9 @@
 #include <linux/of_irq.h>
 #include <linux/module.h>
 
+#include <asm/delay.h>
 #include <asm/hexagon_vm.h>
+#include <asm/time.h>
 
 #define TIMER_ENABLE		BIT(0)
 
@@ -160,7 +162,7 @@ static irqreturn_t timer_interrupt(int irq, void *devid)
  * This runs just before the delay loop is calibrated, and
  * is used for delay calibration.
  */
-void __init time_init_deferred(void)
+static void __init time_init_deferred(void)
 {
 	struct resource *resource = NULL;
 	struct clock_event_device *ce_dev = &hexagon_clockevent_dev;
diff --git linux-libre-6.7-gnu/arch/hexagon/kernel/traps.c linux-libre-6.8-gnu/arch/hexagon/kernel/traps.c
index 6447763ce5a9..75e062722d28 100644
--- linux-libre-6.7-gnu/arch/hexagon/kernel/traps.c
+++ linux-libre-6.8-gnu/arch/hexagon/kernel/traps.c
@@ -281,6 +281,7 @@ static void cache_error(struct pt_regs *regs)
 /*
  * General exception handler
  */
+void do_genex(struct pt_regs *regs);
 void do_genex(struct pt_regs *regs)
 {
 	/*
@@ -331,13 +332,7 @@ void do_genex(struct pt_regs *regs)
 	}
 }
 
-/* Indirect system call dispatch */
-long sys_syscall(void)
-{
-	printk(KERN_ERR "sys_syscall invoked!\n");
-	return -ENOSYS;
-}
-
+void do_trap0(struct pt_regs *regs);
 void do_trap0(struct pt_regs *regs)
 {
 	syscall_fn syscall;
@@ -415,6 +410,7 @@ void do_trap0(struct pt_regs *regs)
 /*
  * Machine check exception handler
  */
+void do_machcheck(struct pt_regs *regs);
 void do_machcheck(struct pt_regs *regs)
 {
 	/* Halt and catch fire */
@@ -425,6 +421,7 @@ void do_machcheck(struct pt_regs *regs)
  * Treat this like the old 0xdb trap.
  */
 
+void do_debug_exception(struct pt_regs *regs);
 void do_debug_exception(struct pt_regs *regs)
 {
 	regs->hvmer.vmest &= ~HVM_VMEST_CAUSE_MSK;
diff --git linux-libre-6.7-gnu/arch/hexagon/kernel/vdso.c linux-libre-6.8-gnu/arch/hexagon/kernel/vdso.c
index b70970ac809f..2e4872d62124 100644
--- linux-libre-6.7-gnu/arch/hexagon/kernel/vdso.c
+++ linux-libre-6.8-gnu/arch/hexagon/kernel/vdso.c
@@ -10,6 +10,7 @@
 #include <linux/vmalloc.h>
 #include <linux/binfmts.h>
 
+#include <asm/elf.h>
 #include <asm/vdso.h>
 
 static struct page *vdso_page;
diff --git linux-libre-6.7-gnu/arch/hexagon/kernel/vm_events.c linux-libre-6.8-gnu/arch/hexagon/kernel/vm_events.c
index 59ef72e4a4e5..2b881a89b206 100644
--- linux-libre-6.7-gnu/arch/hexagon/kernel/vm_events.c
+++ linux-libre-6.8-gnu/arch/hexagon/kernel/vm_events.c
@@ -73,13 +73,6 @@ void show_regs(struct pt_regs *regs)
 		pt_psp(regs), pt_badva(regs), ints_enabled(regs));
 }
 
-void dummy_handler(struct pt_regs *regs)
-{
-	unsigned int elr = pt_elr(regs);
-	printk(KERN_ERR "Unimplemented handler; ELR=0x%08x\n", elr);
-}
-
-
 void arch_do_IRQ(struct pt_regs *regs)
 {
 	int irq = pt_cause(regs);
diff --git linux-libre-6.7-gnu/arch/hexagon/mm/init.c linux-libre-6.8-gnu/arch/hexagon/mm/init.c
index 146115c9de61..3458f39ca2ac 100644
--- linux-libre-6.7-gnu/arch/hexagon/mm/init.c
+++ linux-libre-6.8-gnu/arch/hexagon/mm/init.c
@@ -12,6 +12,7 @@
 #include <linux/highmem.h>
 #include <asm/tlb.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 #include <asm/vm_mmu.h>
 
 /*
@@ -86,7 +87,7 @@ void sync_icache_dcache(pte_t pte)
  * In this mode, we only have one pg_data_t
  * structure: contig_mem_data.
  */
-void __init paging_init(void)
+static void __init paging_init(void)
 {
 	unsigned long max_zone_pfn[MAX_NR_ZONES] = {0, };
 
diff --git linux-libre-6.7-gnu/arch/hexagon/mm/uaccess.c linux-libre-6.8-gnu/arch/hexagon/mm/uaccess.c
index 650bca92f0b7..3204e9ba6d6f 100644
--- linux-libre-6.7-gnu/arch/hexagon/mm/uaccess.c
+++ linux-libre-6.8-gnu/arch/hexagon/mm/uaccess.c
@@ -35,11 +35,3 @@ __kernel_size_t __clear_user_hexagon(void __user *dest, unsigned long count)
 
 	return count;
 }
-
-unsigned long clear_user_hexagon(void __user *dest, unsigned long count)
-{
-	if (!access_ok(dest, count))
-		return count;
-	else
-		return __clear_user_hexagon(dest, count);
-}
diff --git linux-libre-6.7-gnu/arch/hexagon/mm/vm_fault.c linux-libre-6.8-gnu/arch/hexagon/mm/vm_fault.c
index 7295ea3f8cc8..3771fb453898 100644
--- linux-libre-6.7-gnu/arch/hexagon/mm/vm_fault.c
+++ linux-libre-6.8-gnu/arch/hexagon/mm/vm_fault.c
@@ -12,6 +12,7 @@
  */
 
 #include <asm/traps.h>
+#include <asm/vm_fault.h>
 #include <linux/uaccess.h>
 #include <linux/mm.h>
 #include <linux/sched/signal.h>
@@ -33,7 +34,7 @@
 /*
  * Canonical page fault handler
  */
-void do_page_fault(unsigned long address, long cause, struct pt_regs *regs)
+static void do_page_fault(unsigned long address, long cause, struct pt_regs *regs)
 {
 	struct vm_area_struct *vma;
 	struct mm_struct *mm = current->mm;
diff --git linux-libre-6.7-gnu/arch/hexagon/mm/vm_tlb.c linux-libre-6.8-gnu/arch/hexagon/mm/vm_tlb.c
index 53482f2a9ff9..8b6405e2234b 100644
--- linux-libre-6.7-gnu/arch/hexagon/mm/vm_tlb.c
+++ linux-libre-6.8-gnu/arch/hexagon/mm/vm_tlb.c
@@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <asm/page.h>
 #include <asm/hexagon_vm.h>
+#include <asm/tlbflush.h>
 
 /*
  * Initial VM implementation has only one map active at a time, with
diff --git linux-libre-6.7-gnu/arch/loongarch/Kbuild linux-libre-6.8-gnu/arch/loongarch/Kbuild
index beb8499dd8ed..bfa21465d83a 100644
--- linux-libre-6.7-gnu/arch/loongarch/Kbuild
+++ linux-libre-6.8-gnu/arch/loongarch/Kbuild
@@ -4,6 +4,7 @@ obj-y += net/
 obj-y += vdso/
 
 obj-$(CONFIG_KVM) += kvm/
+obj-$(CONFIG_BUILTIN_DTB) += boot/dts/
 
 # for cleaning
 subdir- += boot
diff --git linux-libre-6.7-gnu/arch/loongarch/Kconfig linux-libre-6.8-gnu/arch/loongarch/Kconfig
index ee123820a476..929f68926b34 100644
--- linux-libre-6.7-gnu/arch/loongarch/Kconfig
+++ linux-libre-6.8-gnu/arch/loongarch/Kconfig
@@ -5,12 +5,14 @@ config LOONGARCH
 	select ACPI
 	select ACPI_GENERIC_GSI if ACPI
 	select ACPI_MCFG if ACPI
+	select ACPI_HOTPLUG_CPU if ACPI_PROCESSOR && HOTPLUG_CPU
 	select ACPI_PPTT if ACPI
 	select ACPI_SYSTEM_POWER_STATES_SUPPORT	if ACPI
 	select ARCH_BINFMT_ELF_STATE
 	select ARCH_DISABLE_KASAN_INLINE
 	select ARCH_ENABLE_MEMORY_HOTPLUG
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
+	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
 	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
 	select ARCH_HAS_CPU_FINALIZE_INIT
 	select ARCH_HAS_FORTIFY_SOURCE
@@ -71,6 +73,7 @@ config LOONGARCH
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_DEVICES
 	select GENERIC_ENTRY
 	select GENERIC_GETTIMEOFDAY
 	select GENERIC_IOREMAP if !ARCH_IOREMAP
@@ -97,6 +100,7 @@ config LOONGARCH
 	select HAVE_ARCH_KFENCE
 	select HAVE_ARCH_KGDB if PERF_EVENTS
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
+	select HAVE_ARCH_SECCOMP
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
@@ -140,6 +144,7 @@ config LOONGARCH
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RETHOOK
 	select HAVE_RSEQ
+	select HAVE_RUST
 	select HAVE_SAMPLE_FTRACE_DIRECT
 	select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
 	select HAVE_SETUP_PER_CPU_AREA if NUMA
@@ -374,6 +379,24 @@ config CMDLINE_FORCE
 
 endchoice
 
+config BUILTIN_DTB
+	bool "Enable built-in dtb in kernel"
+	depends on OF
+	help
+	  Some existing systems do not provide a canonical device tree to
+	  the kernel at boot time. Let's provide a device tree table in the
+	  kernel, keyed by the dts filename, containing the relevant DTBs.
+
+	  Built-in DTBs are generic enough and can be used as references.
+
+config BUILTIN_DTB_NAME
+	string "Source file for built-in dtb"
+	depends on BUILTIN_DTB
+	help
+	  Base name (without suffix, relative to arch/loongarch/boot/dts/)
+	  for the DTS file that will be used to produce the DTB linked into
+	  the kernel.
+
 config DMI
 	bool "Enable DMI scanning"
 	select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
@@ -575,6 +598,9 @@ config ARCH_SELECTS_CRASH_DUMP
 	depends on CRASH_DUMP
 	select RELOCATABLE
 
+config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION
+	def_bool CRASH_CORE
+
 config RELOCATABLE
 	bool "Relocatable kernel"
 	help
@@ -608,23 +634,6 @@ config RANDOMIZE_BASE_MAX_OFFSET
 
 	  This is limited by the size of the lower address memory, 256MB.
 
-config SECCOMP
-	bool "Enable seccomp to safely compute untrusted bytecode"
-	depends on PROC_FS
-	default y
-	help
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via /proc/<pid>/seccomp, it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-	  If unsure, say Y. Only embedded should say N here.
-
 endmenu
 
 config ARCH_SELECT_MEMORY_MODEL
@@ -643,10 +652,6 @@ config ARCH_SPARSEMEM_ENABLE
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/mm/numa.rst> for more.
 
-config ARCH_ENABLE_THP_MIGRATION
-	def_bool y
-	depends on TRANSPARENT_HUGEPAGE
-
 config ARCH_MEMORY_PROBE
 	def_bool y
 	depends on MEMORY_HOTPLUG
diff --git linux-libre-6.7-gnu/arch/loongarch/Makefile linux-libre-6.8-gnu/arch/loongarch/Makefile
index 4ba8d67ddb09..983aa2b1629a 100644
--- linux-libre-6.7-gnu/arch/loongarch/Makefile
+++ linux-libre-6.8-gnu/arch/loongarch/Makefile
@@ -6,6 +6,7 @@
 boot	:= arch/loongarch/boot
 
 KBUILD_DEFCONFIG := loongson3_defconfig
+KBUILD_DTBS      := dtbs
 
 image-name-y			:= vmlinux
 image-name-$(CONFIG_EFI_ZBOOT)	:= vmlinuz
@@ -81,8 +82,11 @@ KBUILD_AFLAGS_MODULE		+= -Wa,-mla-global-with-abs
 KBUILD_CFLAGS_MODULE		+= -fplt -Wa,-mla-global-with-abs,-mla-local-with-abs
 endif
 
+KBUILD_RUSTFLAGS_MODULE		+= -Crelocation-model=pic
+
 ifeq ($(CONFIG_RELOCATABLE),y)
 KBUILD_CFLAGS_KERNEL		+= -fPIE
+KBUILD_RUSTFLAGS_KERNEL		+= -Crelocation-model=pie
 LDFLAGS_vmlinux			+= -static -pie --no-dynamic-linker -z notext $(call ld-option, --apply-dynamic-relocs)
 endif
 
@@ -141,7 +145,7 @@ endif
 
 vdso-install-y += arch/loongarch/vdso/vdso.so.dbg
 
-all:	$(notdir $(KBUILD_IMAGE))
+all:	$(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS)
 
 vmlinuz.efi: vmlinux.efi
 
diff --git linux-libre-6.7-gnu/arch/loongarch/boot/dts/Makefile linux-libre-6.8-gnu/arch/loongarch/boot/dts/Makefile
index 5f1f55e911ad..747d0c3f6389 100644
--- linux-libre-6.7-gnu/arch/loongarch/boot/dts/Makefile
+++ linux-libre-6.8-gnu/arch/loongarch/boot/dts/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
-dtstree	:= $(srctree)/$(src)
 
-dtb-y := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
+dtb-y = loongson-2k0500-ref.dtb loongson-2k1000-ref.dtb loongson-2k2000-ref.dtb
+
+obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME))
diff --git linux-libre-6.7-gnu/arch/loongarch/boot/dts/loongson-2k0500-ref.dts linux-libre-6.8-gnu/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
new file mode 100644
index 000000000000..8aefb0c12672
--- /dev/null
+++ linux-libre-6.8-gnu/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k0500.dtsi"
+
+/ {
+	compatible = "loongson,ls2k0500-ref", "loongson,ls2k0500";
+	model = "Loongson-2K0500 Reference Board";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x00200000 0x0 0x0ee00000>,
+		      <0x0 0x90000000 0x0 0x60000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	bus_id = <0x0>;
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	bus_id = <0x1>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	eeprom@57 {
+		compatible = "atmel,24c16";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/loongarch/boot/dts/loongson-2k0500.dtsi linux-libre-6.8-gnu/arch/loongarch/boot/dts/loongson-2k0500.dtsi
new file mode 100644
index 000000000000..444779c21034
--- /dev/null
+++ linux-libre-6.8-gnu/arch/loongarch/boot/dts/loongson-2k0500.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "loongson,la264";
+			device_type = "cpu";
+			reg = <0x0>;
+			clocks = <&cpu_clk>;
+		};
+	};
+
+	cpu_clk: cpu-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+			 <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		isa@16400000 {
+			compatible = "isa";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			ranges = <1 0x0 0x0 0x16400000 0x4000>;
+		};
+
+		liointc0: interrupt-controller@1fe11400 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe11400 0x0 0x40>,
+			      <0x0 0x1fe11040 0x0 0x8>;
+			reg-names = "main", "isr0";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		liointc1: interrupt-controller@1fe11440 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe11440 0x0 0x40>,
+			      <0x0 0x1fe11048 0x0 0x8>;
+			reg-names = "main", "isr0";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <4>;
+			interrupt-names = "int2";
+
+			loongson,parent_int_map = <0x00000000>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0xffffffff>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		eiointc: interrupt-controller@1fe11600 {
+			compatible = "loongson,ls2k0500-eiointc";
+			reg = <0x0 0x1fe11600 0x0 0xea00>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+		};
+
+		gmac0: ethernet@1f020000 {
+			compatible = "snps,dwmac-3.70a";
+			reg = <0x0 0x1f020000 0x0 0x10000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@1f030000 {
+			compatible = "snps,dwmac-3.70a";
+			reg = <0x0 0x1f030000 0x0 0x10000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		sata: sata@1f040000 {
+			compatible = "snps,spear-ahci";
+			reg = <0x0 0x1f040000 0x0 0x10000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <75>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1f050000 {
+			compatible = "generic-ehci";
+			reg = <0x0 0x1f050000 0x0 0x8000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <71>;
+			status = "disabled";
+		};
+
+		ohci0: usb@1f058000 {
+			compatible = "generic-ohci";
+			reg = <0x0 0x1f058000 0x0 0x8000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <72>;
+			status = "disabled";
+		};
+
+		uart0: serial@1ff40800 {
+			compatible = "ns16550a";
+			reg = <0x0 0x1ff40800 0x0 0x10>;
+			clock-frequency = <100000000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <2>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1ff48000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff48000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <14>;
+			status = "disabled";
+		};
+
+		i2c@1ff48800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff48800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <15>;
+			status = "disabled";
+		};
+
+		i2c@1ff49000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff49000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+
+		i2c@1ff49800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff49800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <17>;
+			status = "disabled";
+		};
+
+		i2c@1ff4a000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff4a000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <18>;
+			status = "disabled";
+		};
+
+		i2c@1ff4a800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff4a800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <19>;
+			status = "disabled";
+		};
+
+		pmc: power-management@1ff6c000 {
+			compatible = "loongson,ls2k0500-pmc", "syscon";
+			reg = <0x0 0x1ff6c000 0x0 0x58>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <56>;
+			loongson,suspend-address = <0x0 0x1c000500>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x30>;
+				mask = <0x1>;
+			};
+
+			syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmc>;
+				offset = <0x14>;
+				mask = <0x3c00>;
+				value = <0x3c00>;
+			};
+		};
+
+		rtc0: rtc@1ff6c100 {
+			compatible = "loongson,ls2k0500-rtc", "loongson,ls7a-rtc";
+			reg = <0x0 0x1ff6c100 0x0 0x100>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <35>;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0x5>;
+			ranges = <0x01000000 0x0 0x00004000 0x0 0x16404000 0x0 0x00004000>,
+				 <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+
+			pcie@0,0 {
+				reg = <0x0000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&eiointc>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 81>;
+				ranges;
+			};
+
+			pcie@1,0 {
+				reg = <0x0800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&eiointc>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 82>;
+				ranges;
+			};
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/loongarch/boot/dts/loongson-2k1000-ref.dts linux-libre-6.8-gnu/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
new file mode 100644
index 000000000000..ed4d32434041
--- /dev/null
+++ linux-libre-6.8-gnu/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k1000.dtsi"
+
+/ {
+	compatible = "loongson,ls2k1000-ref", "loongson,ls2k1000";
+	model = "Loongson-2K1000 Reference Board";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x00200000 0x0 0x06e00000>,
+		      <0x0 0x08000000 0x0 0x07000000>,
+		      <0x0 0x90000000 0x1 0xe0000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy1>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy1: ethernet-phy@1 {
+			reg = <16>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	pinctrl-0 = <&i2c0_pins_default>;
+	pinctrl-names = "default";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	eeprom@57 {
+		compatible = "atmel,24c16";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <100000000>;
+		reg = <0>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&clk {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&pctrl {
+	status = "okay";
+
+	sdio_pins_default: sdio-pins {
+		sdio-pinmux {
+			groups = "sdio";
+			function = "sdio";
+		};
+		sdio-det-pinmux {
+			groups = "pwm2";
+			function = "gpio";
+		};
+	};
+
+	pwm1_pins_default: pwm1-pins {
+		pinmux {
+			groups = "pwm1";
+			function = "pwm1";
+		};
+	};
+
+	pwm0_pins_default: pwm0-pins {
+		pinmux {
+			groups = "pwm0";
+			function = "pwm0";
+		};
+	};
+
+	i2c1_pins_default: i2c1-pins {
+		pinmux {
+			groups = "i2c1";
+			function = "i2c1";
+		};
+	};
+
+	i2c0_pins_default: i2c0-pins {
+		pinmux {
+			groups = "i2c0";
+			function = "i2c0";
+		};
+	};
+
+	nand_pins_default: nand-pins {
+		pinmux {
+			groups = "nand";
+			function = "nand";
+		};
+	};
+
+	hda_pins_default: hda-pins {
+		grp0-pinmux {
+			groups = "hda";
+			function = "hda";
+		};
+		grp1-pinmux {
+			groups = "i2s";
+			function = "gpio";
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/loongarch/boot/dts/loongson-2k1000.dtsi linux-libre-6.8-gnu/arch/loongarch/boot/dts/loongson-2k1000.dtsi
new file mode 100644
index 000000000000..49a70f8c3cab
--- /dev/null
+++ linux-libre-6.8-gnu/arch/loongarch/boot/dts/loongson-2k1000.dtsi
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "loongson,la264";
+			device_type = "cpu";
+			reg= <0x0>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "loongson,la264";
+			device_type = "cpu";
+			reg = <0x1>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
+		};
+	};
+
+	ref_100m: clock-ref-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "ref_100m";
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	/* i2c of the dvi eeprom edid */
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	/* i2c of the eeprom edid */
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		scl-gpios = <&gpio0 33 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio0 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tsensor 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <33000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <85000>;
+					hysteresis = <5000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+			 <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-coherent;
+
+		liointc0: interrupt-controller@1fe01400 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe01400 0x0 0x40>,
+			      <0x0 0x1fe01040 0x0 0x8>,
+			      <0x0 0x1fe01140 0x0 0x8>;
+			reg-names = "main", "isr0", "isr1";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		liointc1: interrupt-controller@1fe01440 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe01440 0x0 0x40>,
+			      <0x0 0x1fe01048 0x0 0x8>,
+			      <0x0 0x1fe01148 0x0 0x8>;
+			reg-names = "main", "isr0", "isr1";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+			interrupt-names = "int1";
+			loongson,parent_int_map = <0x00000000>, /* int0 */
+						  <0xffffffff>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		chipid@1fe00000 {
+			compatible = "loongson,ls2k-chipid";
+			reg = <0x0 0x1fe00000 0x0 0x30>;
+			little-endian;
+		};
+
+		pctrl: pinctrl@1fe00420 {
+			compatible = "loongson,ls2k-pinctrl";
+			reg = <0x0 0x1fe00420 0x0 0x18>;
+			status = "disabled";
+		};
+
+		clk: clock-controller@1fe00480 {
+			compatible = "loongson,ls2k-clk";
+			reg = <0x0 0x1fe00480 0x0 0x58>;
+			#clock-cells = <1>;
+			clocks = <&ref_100m>;
+			clock-names = "ref_100m";
+			status = "disabled";
+		};
+
+		gpio0: gpio@1fe00500 {
+			compatible = "loongson,ls2k-gpio";
+			reg = <0x0 0x1fe00500 0x0 0x38>;
+			ngpios = <64>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pctrl 0x0 0x0 15>,
+				      <&pctrl 16 16 15>,
+				      <&pctrl 32 32 10>,
+				      <&pctrl 44 44 20>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>,
+				     <29 IRQ_TYPE_LEVEL_HIGH>,
+				     <30 IRQ_TYPE_LEVEL_HIGH>,
+				     <30 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <>,
+				     <>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		tsensor: thermal-sensor@1fe01500 {
+			compatible = "loongson,ls2k1000-thermal";
+			reg = <0x0 0x1fe01500 0x0 0x30>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		dma-controller@1fe00c00 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c00 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe00c10 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c10 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe00c20 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c20 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe00c30 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c30 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe00c40 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c40 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		uart0: serial@1fe20000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x1fe20000 0x0 0x10>;
+			clock-frequency = <125000000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <0x0 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1fe21000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1fe21000 0x0 0x8>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@1fe21800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1fe21800 0x0 0x8>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pmc: power-management@1fe27000 {
+			compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon";
+			reg = <0x0 0x1fe27000 0x0 0x58>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			loongson,suspend-address = <0x0 0x1c000500>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x30>;
+				mask = <0x1>;
+			};
+
+			syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmc>;
+				offset = <0x14>;
+				mask = <0x3c00>;
+				value = <0x3c00>;
+			};
+		};
+
+		rtc0: rtc@1fe27800 {
+			compatible = "loongson,ls2k1000-rtc";
+			reg = <0x0 0x1fe27800 0x0 0x100>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		spi0: spi@1fff0220 {
+			compatible = "loongson,ls2k1000-spi";
+			reg = <0x0 0x1fff0220 0x0 0x10>;
+			clocks = <&clk LOONGSON2_BOOT_CLK>;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0xff>;
+			ranges = <0x01000000 0x0 0x00008000 0x0 0x18008000 0x0 0x00008000>,
+				 <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
+
+			gmac0: ethernet@3,0 {
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				status = "disabled";
+			};
+
+			gmac1: ethernet@3,1 {
+				reg = <0x1900 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				status = "disabled";
+			};
+
+			ehci0: usb@4,1 {
+				reg = <0x2100 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc1>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			ohci0: usb@4,2 {
+				reg = <0x2200 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc1>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			display@6,0 {
+				reg = <0x3000 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			hda@7,0 {
+				reg = <0x3800 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			sata: sata@8,0 {
+				reg = <0x4000 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 0x0 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@a,0 {
+				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@b,0 {
+				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@c,0 {
+				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@d,0 {
+				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@e,0 {
+				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/loongarch/boot/dts/loongson-2k2000-ref.dts linux-libre-6.8-gnu/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
new file mode 100644
index 000000000000..dca91caf895e
--- /dev/null
+++ linux-libre-6.8-gnu/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k2000.dtsi"
+
+/ {
+	compatible = "loongson,ls2k2000-ref", "loongson,ls2k2000";
+	model = "Loongson-2K2000 Reference Board";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x00200000 0x0 0x0ee00000>,
+		      <0x0 0x90000000 0x0 0x70000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/loongarch/boot/dts/loongson-2k2000.dtsi linux-libre-6.8-gnu/arch/loongarch/boot/dts/loongson-2k2000.dtsi
new file mode 100644
index 000000000000..a231949b5f55
--- /dev/null
+++ linux-libre-6.8-gnu/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@1 {
+			compatible = "loongson,la364";
+			device_type = "cpu";
+			reg = <0x0>;
+			clocks = <&cpu_clk>;
+		};
+
+		cpu1: cpu@2 {
+			compatible = "loongson,la364";
+			device_type = "cpu";
+			reg = <0x1>;
+			clocks = <&cpu_clk>;
+		};
+	};
+
+	cpu_clk: cpu-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1400000000>;
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		pmc: power-management@100d0000 {
+			compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon";
+			reg = <0x0 0x100d0000 0x0 0x58>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <47>;
+			loongson,suspend-address = <0x0 0x1c000500>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x30>;
+				mask = <0x1>;
+			};
+
+			syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmc>;
+				offset = <0x14>;
+				mask = <0x3c00>;
+				value = <0x3c00>;
+			};
+		};
+
+		liointc: interrupt-controller@1fe01400 {
+			compatible = "loongson,liointc-1.0";
+			reg = <0x0 0x1fe01400 0x0 0x64>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		eiointc: interrupt-controller@1fe01600 {
+			compatible = "loongson,ls2k2000-eiointc";
+			reg = <0x0 0x1fe01600 0x0 0xea00>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+		};
+
+		pic: interrupt-controller@10000000 {
+			compatible = "loongson,pch-pic-1.0";
+			reg = <0x0 0x10000000 0x0 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			loongson,pic-base-vec = <0>;
+			interrupt-parent = <&eiointc>;
+		};
+
+		msi: msi-controller@1fe01140 {
+			compatible = "loongson,pch-msi-1.0";
+			reg = <0x0 0x1fe01140 0x0 0x8>;
+			msi-controller;
+			loongson,msi-base-vec = <64>;
+			loongson,msi-num-vecs = <192>;
+			interrupt-parent = <&eiointc>;
+		};
+
+		rtc0: rtc@100d0100 {
+			compatible = "loongson,ls2k2000-rtc", "loongson,ls7a-rtc";
+			reg = <0x0 0x100d0100 0x0 0x100>;
+			interrupt-parent = <&pic>;
+			interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@1fe001e0 {
+			compatible = "ns16550a";
+			reg = <0x0 0x1fe001e0 0x0 0x10>;
+			clock-frequency = <100000000>;
+			interrupt-parent = <&liointc>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0xff>;
+			ranges = <0x01000000 0x0 0x00008000 0x0 0x18400000 0x0 0x00008000>,
+				 <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
+
+			gmac0: ethernet@3,0 {
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			gmac1: ethernet@3,1 {
+				reg = <0x1900 0x0 0x0 0x0 0x0>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			gmac2: ethernet@3,2 {
+				reg = <0x1a00 0x0 0x0 0x0 0x0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			xhci0: usb@4,0 {
+				reg = <0x2000 0x0 0x0 0x0 0x0>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			xhci1: usb@19,0 {
+				reg = <0xc800 0x0 0x0 0x0 0x0>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			display@6,1 {
+				reg = <0x3100 0x0 0x0 0x0 0x0>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			hda@7,0 {
+				reg = <0x3800 0x0 0x0 0x0 0x0>;
+				interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			sata: sata@8,0 {
+				reg = <0x4000 0x0 0x0 0x0 0x0>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 32 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@a,0 {
+				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 33 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@b,0 {
+				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 34 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@c,0 {
+				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 35 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@d,0 {
+				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 36 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@e,0 {
+				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 37 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@f,0 {
+				reg = <0x7800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 40 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@10,0 {
+				reg = <0x8000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 30 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/loongarch/configs/loongson3_defconfig linux-libre-6.8-gnu/arch/loongarch/configs/loongson3_defconfig
index 33795e4a5bd6..f18c2ba871ef 100644
--- linux-libre-6.7-gnu/arch/loongarch/configs/loongson3_defconfig
+++ linux-libre-6.8-gnu/arch/loongarch/configs/loongson3_defconfig
@@ -6,6 +6,8 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BPF_SYSCALL=y
 CONFIG_BPF_JIT=y
 CONFIG_PREEMPT=y
+CONFIG_PREEMPT_DYNAMIC=y
+CONFIG_SCHED_CORE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
@@ -19,6 +21,7 @@ CONFIG_BLK_CGROUP=y
 CONFIG_CFS_BANDWIDTH=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_RDMA=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_HUGETLB=y
 CONFIG_CPUSETS=y
@@ -26,6 +29,7 @@ CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_PERF=y
 CONFIG_CGROUP_BPF=y
+CONFIG_CGROUP_MISC=y
 CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_CHECKPOINT_RESTORE=y
@@ -35,6 +39,8 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
 CONFIG_LOONGARCH=y
 CONFIG_64BIT=y
 CONFIG_MACH_LOONGSON64=y
@@ -44,13 +50,11 @@ CONFIG_DMI=y
 CONFIG_EFI=y
 CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
-CONFIG_NR_CPUS=64
+CONFIG_NR_CPUS=256
 CONFIG_NUMA=y
 CONFIG_CPU_HAS_FPU=y
 CONFIG_CPU_HAS_LSX=y
 CONFIG_CPU_HAS_LASX=y
-CONFIG_KEXEC=y
-CONFIG_CRASH_DUMP=y
 CONFIG_RANDOMIZE_BASE=y
 CONFIG_SUSPEND=y
 CONFIG_HIBERNATION=y
@@ -62,10 +66,6 @@ CONFIG_ACPI_IPMI=m
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_PCI_SLOT=y
 CONFIG_ACPI_HOTPLUG_MEMORY=y
-CONFIG_EFI_ZBOOT=y
-CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
-CONFIG_EFI_CAPSULE_LOADER=m
-CONFIG_EFI_TEST=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM=m
 CONFIG_JUMP_LABEL=y
@@ -74,10 +74,18 @@ CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_ZONED=y
 CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_BLK_DEV_THROTTLING_LOW=y
+CONFIG_BLK_WBT=y
+CONFIG_BLK_CGROUP_IOLATENCY=y
+CONFIG_BLK_CGROUP_FC_APPID=y
+CONFIG_BLK_CGROUP_IOCOST=y
+CONFIG_BLK_CGROUP_IOPRIO=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_CMDLINE_PARTITION=y
 CONFIG_IOSCHED_BFQ=y
 CONFIG_BFQ_GROUP_IOSCHED=y
 CONFIG_BINFMT_MISC=m
@@ -93,6 +101,8 @@ CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CMA=y
+CONFIG_CMA_SYSFS=y
 CONFIG_USERFAULTFD=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -128,6 +138,7 @@ CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_ESP=m
 CONFIG_IPV6_MROUTE=y
+CONFIG_MPTCP=y
 CONFIG_NETWORK_PHY_TIMESTAMPING=y
 CONFIG_NETFILTER=y
 CONFIG_BRIDGE_NETFILTER=m
@@ -276,7 +287,6 @@ CONFIG_BRIDGE_EBT_T_NAT=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
 CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BPFILTER=y
 CONFIG_IP_SCTP=m
 CONFIG_RDS=y
 CONFIG_L2TP=m
@@ -304,7 +314,6 @@ CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=m
 CONFIG_NET_ACT_GACT=m
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_BPF=m
 CONFIG_OPENVSWITCH=m
@@ -354,6 +363,7 @@ CONFIG_PCIEAER=y
 CONFIG_PCI_IOV=y
 CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_SHPC=y
+CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCCARD=m
 CONFIG_YENTA=m
 CONFIG_RAPIDIO=y
@@ -367,6 +377,10 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_EFI_ZBOOT=y
+CONFIG_EFI_BOOTLOADER_CONTROL=m
+CONFIG_EFI_CAPSULE_LOADER=m
+CONFIG_EFI_TEST=m
 CONFIG_MTD=m
 CONFIG_MTD_BLOCK=m
 CONFIG_MTD_CFI=m
@@ -588,6 +602,7 @@ CONFIG_RTW89_8852AE=m
 CONFIG_RTW89_8852CE=m
 CONFIG_ZD1211RW=m
 CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_USB4_NET=m
 CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_EVDEV=y
@@ -693,6 +708,9 @@ CONFIG_SND_HDA_CODEC_SIGMATEL=y
 CONFIG_SND_HDA_CODEC_HDMI=y
 CONFIG_SND_HDA_CODEC_CONEXANT=y
 CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_LOONGSON_CARD=m
+CONFIG_SND_VIRTIO=m
 CONFIG_HIDRAW=y
 CONFIG_UHID=m
 CONFIG_HID_A4TECH=m
@@ -740,6 +758,11 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_EFI=y
 CONFIG_RTC_DRV_LOONGSON=y
 CONFIG_DMADEVICES=y
+CONFIG_LS2X_APB_DMA=y
+CONFIG_UDMABUF=y
+CONFIG_DMABUF_HEAPS=y
+CONFIG_DMABUF_HEAPS_SYSTEM=y
+CONFIG_DMABUF_HEAPS_CMA=y
 CONFIG_UIO=m
 CONFIG_UIO_PDRV_GENIRQ=m
 CONFIG_UIO_DMEM_GENIRQ=m
@@ -780,7 +803,15 @@ CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
 CONFIG_DEVFREQ_GOV_PERFORMANCE=y
 CONFIG_DEVFREQ_GOV_POWERSAVE=y
 CONFIG_DEVFREQ_GOV_USERSPACE=y
+CONFIG_NTB=m
+CONFIG_NTB_MSI=y
+CONFIG_NTB_IDT=m
+CONFIG_NTB_EPF=m
+CONFIG_NTB_SWITCHTEC=m
+CONFIG_NTB_PERF=m
+CONFIG_NTB_TRANSPORT=m
 CONFIG_PWM=y
+CONFIG_USB4=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -799,6 +830,10 @@ CONFIG_GFS2_FS_LOCKING_DLM=y
 CONFIG_OCFS2_FS=m
 CONFIG_BTRFS_FS=y
 CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_F2FS_FS=m
+CONFIG_F2FS_FS_SECURITY=y
+CONFIG_F2FS_CHECK_FS=y
+CONFIG_F2FS_FS_COMPRESSION=y
 CONFIG_FANOTIFY=y
 CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
 CONFIG_QUOTA=y
@@ -885,7 +920,6 @@ CONFIG_KEY_DH_OPERATIONS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_DISABLE=y
 CONFIG_SECURITY_APPARMOR=y
 CONFIG_SECURITY_YAMA=y
 CONFIG_DEFAULT_SECURITY_DAC=y
@@ -916,6 +950,9 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 CONFIG_CRYPTO_CRC32_LOONGARCH=m
 CONFIG_CRYPTO_DEV_VIRTIO=m
+CONFIG_DMA_CMA=y
+CONFIG_DMA_NUMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=0
 CONFIG_PRINTK_TIME=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_MAGIC_SYSRQ=y
diff --git linux-libre-6.7-gnu/arch/loongarch/include/asm/acpi.h linux-libre-6.8-gnu/arch/loongarch/include/asm/acpi.h
index 8de6c4b83a61..49e29b29996f 100644
--- linux-libre-6.7-gnu/arch/loongarch/include/asm/acpi.h
+++ linux-libre-6.8-gnu/arch/loongarch/include/asm/acpi.h
@@ -32,8 +32,10 @@ static inline bool acpi_has_cpu_in_madt(void)
 	return true;
 }
 
+#define MAX_CORE_PIC 256
+
 extern struct list_head acpi_wakeup_device_list;
-extern struct acpi_madt_core_pic acpi_core_pic[NR_CPUS];
+extern struct acpi_madt_core_pic acpi_core_pic[MAX_CORE_PIC];
 
 extern int __init parse_acpi_topology(void);
 
diff --git linux-libre-6.7-gnu/arch/loongarch/include/asm/bootinfo.h linux-libre-6.8-gnu/arch/loongarch/include/asm/bootinfo.h
index c60796869b2b..6d5846dd075c 100644
--- linux-libre-6.7-gnu/arch/loongarch/include/asm/bootinfo.h
+++ linux-libre-6.8-gnu/arch/loongarch/include/asm/bootinfo.h
@@ -24,13 +24,15 @@ struct loongson_board_info {
 	const char *board_vendor;
 };
 
+#define NR_WORDS DIV_ROUND_UP(NR_CPUS, BITS_PER_LONG)
+
 struct loongson_system_configuration {
 	int nr_cpus;
 	int nr_nodes;
 	int boot_cpu_id;
 	int cores_per_node;
 	int cores_per_package;
-	unsigned long cores_io_master;
+	unsigned long cores_io_master[NR_WORDS];
 	unsigned long suspend_addr;
 	const char *cpuname;
 };
@@ -42,7 +44,7 @@ extern struct loongson_system_configuration loongson_sysconf;
 
 static inline bool io_master(int cpu)
 {
-	return test_bit(cpu, &loongson_sysconf.cores_io_master);
+	return test_bit(cpu, loongson_sysconf.cores_io_master);
 }
 
 #endif /* _ASM_BOOTINFO_H */
diff --git linux-libre-6.7-gnu/arch/loongarch/include/asm/crash_core.h linux-libre-6.8-gnu/arch/loongarch/include/asm/crash_core.h
new file mode 100644
index 000000000000..218bdbfa527b
--- /dev/null
+++ linux-libre-6.8-gnu/arch/loongarch/include/asm/crash_core.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _LOONGARCH_CRASH_CORE_H
+#define _LOONGARCH_CRASH_CORE_H
+
+#define CRASH_ALIGN			SZ_2M
+
+#define CRASH_ADDR_LOW_MAX		SZ_4G
+#define CRASH_ADDR_HIGH_MAX		memblock_end_of_DRAM()
+
+extern phys_addr_t memblock_end_of_DRAM(void);
+
+#endif
diff --git linux-libre-6.7-gnu/arch/loongarch/include/asm/efi.h linux-libre-6.8-gnu/arch/loongarch/include/asm/efi.h
index 91d81f9730ab..eddc8e79b3fa 100644
--- linux-libre-6.7-gnu/arch/loongarch/include/asm/efi.h
+++ linux-libre-6.8-gnu/arch/loongarch/include/asm/efi.h
@@ -32,6 +32,4 @@ static inline unsigned long efi_get_kimg_min_align(void)
 
 #define EFI_KIMG_PREFERRED_ADDRESS	PHYSADDR(VMLINUX_LOAD_ADDRESS)
 
-unsigned long kernel_entry_address(unsigned long kernel_addr);
-
 #endif /* _ASM_LOONGARCH_EFI_H */
diff --git linux-libre-6.7-gnu/arch/loongarch/include/asm/elf.h linux-libre-6.8-gnu/arch/loongarch/include/asm/elf.h
index 9b16a3b8e706..f16bd42456e4 100644
--- linux-libre-6.7-gnu/arch/loongarch/include/asm/elf.h
+++ linux-libre-6.8-gnu/arch/loongarch/include/asm/elf.h
@@ -241,8 +241,6 @@ void loongarch_dump_regs64(u64 *uregs, const struct pt_regs *regs);
 do {									\
 	current->thread.vdso = &vdso_info;				\
 									\
-	loongarch_set_personality_fcsr(state);				\
-									\
 	if (personality(current->personality) != PER_LINUX)		\
 		set_personality(PER_LINUX);				\
 } while (0)
@@ -259,7 +257,6 @@ do {									\
 	clear_thread_flag(TIF_32BIT_ADDR);				\
 									\
 	current->thread.vdso = &vdso_info;				\
-	loongarch_set_personality_fcsr(state);				\
 									\
 	p = personality(current->personality);				\
 	if (p != PER_LINUX32 && p != PER_LINUX)				\
@@ -340,6 +337,4 @@ extern int arch_elf_pt_proc(void *ehdr, void *phdr, struct file *elf,
 extern int arch_check_elf(void *ehdr, bool has_interpreter, void *interp_ehdr,
 			  struct arch_elf_state *state);
 
-extern void loongarch_set_personality_fcsr(struct arch_elf_state *state);
-
 #endif /* _ASM_ELF_H */
diff --git linux-libre-6.7-gnu/arch/loongarch/include/asm/ftrace.h linux-libre-6.8-gnu/arch/loongarch/include/asm/ftrace.h
index a11996eb5892..de891c2c83d4 100644
--- linux-libre-6.7-gnu/arch/loongarch/include/asm/ftrace.h
+++ linux-libre-6.8-gnu/arch/loongarch/include/asm/ftrace.h
@@ -63,7 +63,7 @@ ftrace_regs_get_instruction_pointer(struct ftrace_regs *fregs)
 static __always_inline void
 ftrace_regs_set_instruction_pointer(struct ftrace_regs *fregs, unsigned long ip)
 {
-	regs_set_return_value(&fregs->regs, ip);
+	instruction_pointer_set(&fregs->regs, ip);
 }
 
 #define ftrace_regs_get_argument(fregs, n) \
diff --git linux-libre-6.7-gnu/arch/loongarch/include/asm/jump_label.h linux-libre-6.8-gnu/arch/loongarch/include/asm/jump_label.h
index 3cea299a5ef5..29acfe3de3fa 100644
--- linux-libre-6.7-gnu/arch/loongarch/include/asm/jump_label.h
+++ linux-libre-6.8-gnu/arch/loongarch/include/asm/jump_label.h
@@ -22,7 +22,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key * const key, const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	nop			\n\t"
 		JUMP_TABLE_ENTRY
 		:  :  "i"(&((char *)key)[branch]) :  : l_yes);
@@ -35,7 +35,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key * const key, const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	b	%l[l_yes]	\n\t"
 		JUMP_TABLE_ENTRY
 		:  :  "i"(&((char *)key)[branch]) :  : l_yes);
diff --git linux-libre-6.7-gnu/arch/loongarch/include/asm/kvm_host.h linux-libre-6.8-gnu/arch/loongarch/include/asm/kvm_host.h
index 11328700d4fa..2d62f7b0d377 100644
--- linux-libre-6.7-gnu/arch/loongarch/include/asm/kvm_host.h
+++ linux-libre-6.8-gnu/arch/loongarch/include/asm/kvm_host.h
@@ -45,7 +45,10 @@ struct kvm_vcpu_stat {
 	u64 signal_exits;
 };
 
+#define KVM_MEM_HUGEPAGE_CAPABLE	(1UL << 0)
+#define KVM_MEM_HUGEPAGE_INCAPABLE	(1UL << 1)
 struct kvm_arch_memory_slot {
+	unsigned long flags;
 };
 
 struct kvm_context {
@@ -92,8 +95,10 @@ enum emulation_result {
 };
 
 #define KVM_LARCH_FPU		(0x1 << 0)
-#define KVM_LARCH_SWCSR_LATEST	(0x1 << 1)
-#define KVM_LARCH_HWCSR_USABLE	(0x1 << 2)
+#define KVM_LARCH_LSX		(0x1 << 1)
+#define KVM_LARCH_LASX		(0x1 << 2)
+#define KVM_LARCH_SWCSR_LATEST	(0x1 << 3)
+#define KVM_LARCH_HWCSR_USABLE	(0x1 << 4)
 
 struct kvm_vcpu_arch {
 	/*
@@ -175,6 +180,21 @@ static inline void writel_sw_gcsr(struct loongarch_csrs *csr, int reg, unsigned
 	csr->csrs[reg] = val;
 }
 
+static inline bool kvm_guest_has_fpu(struct kvm_vcpu_arch *arch)
+{
+	return arch->cpucfg[2] & CPUCFG2_FP;
+}
+
+static inline bool kvm_guest_has_lsx(struct kvm_vcpu_arch *arch)
+{
+	return arch->cpucfg[2] & CPUCFG2_LSX;
+}
+
+static inline bool kvm_guest_has_lasx(struct kvm_vcpu_arch *arch)
+{
+	return arch->cpucfg[2] & CPUCFG2_LASX;
+}
+
 /* Debug: dump vcpu state */
 int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu);
 
@@ -183,7 +203,6 @@ void kvm_flush_tlb_all(void);
 void kvm_flush_tlb_gpa(struct kvm_vcpu *vcpu, unsigned long gpa);
 int kvm_handle_mm_fault(struct kvm_vcpu *vcpu, unsigned long badv, bool write);
 
-#define KVM_ARCH_WANT_MMU_NOTIFIER
 void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
 int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end, bool blockable);
 int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end);
diff --git linux-libre-6.7-gnu/arch/loongarch/include/asm/kvm_vcpu.h linux-libre-6.8-gnu/arch/loongarch/include/asm/kvm_vcpu.h
index 553cfa2b2b1c..0cb4fdb8a9b5 100644
--- linux-libre-6.7-gnu/arch/loongarch/include/asm/kvm_vcpu.h
+++ linux-libre-6.8-gnu/arch/loongarch/include/asm/kvm_vcpu.h
@@ -55,7 +55,26 @@ void kvm_save_fpu(struct loongarch_fpu *fpu);
 void kvm_restore_fpu(struct loongarch_fpu *fpu);
 void kvm_restore_fcsr(struct loongarch_fpu *fpu);
 
-void kvm_acquire_timer(struct kvm_vcpu *vcpu);
+#ifdef CONFIG_CPU_HAS_LSX
+int kvm_own_lsx(struct kvm_vcpu *vcpu);
+void kvm_save_lsx(struct loongarch_fpu *fpu);
+void kvm_restore_lsx(struct loongarch_fpu *fpu);
+#else
+static inline int kvm_own_lsx(struct kvm_vcpu *vcpu) { return -EINVAL; }
+static inline void kvm_save_lsx(struct loongarch_fpu *fpu) { }
+static inline void kvm_restore_lsx(struct loongarch_fpu *fpu) { }
+#endif
+
+#ifdef CONFIG_CPU_HAS_LASX
+int kvm_own_lasx(struct kvm_vcpu *vcpu);
+void kvm_save_lasx(struct loongarch_fpu *fpu);
+void kvm_restore_lasx(struct loongarch_fpu *fpu);
+#else
+static inline int kvm_own_lasx(struct kvm_vcpu *vcpu) { return -EINVAL; }
+static inline void kvm_save_lasx(struct loongarch_fpu *fpu) { }
+static inline void kvm_restore_lasx(struct loongarch_fpu *fpu) { }
+#endif
+
 void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long hz);
 void kvm_reset_timer(struct kvm_vcpu *vcpu);
 void kvm_save_timer(struct kvm_vcpu *vcpu);
diff --git linux-libre-6.7-gnu/arch/loongarch/include/asm/pgtable.h linux-libre-6.8-gnu/arch/loongarch/include/asm/pgtable.h
index 29d9b12298bc..8b5df1bbf9e9 100644
--- linux-libre-6.7-gnu/arch/loongarch/include/asm/pgtable.h
+++ linux-libre-6.8-gnu/arch/loongarch/include/asm/pgtable.h
@@ -523,6 +523,7 @@ static inline pmd_t pmd_wrprotect(pmd_t pmd)
 	return pmd;
 }
 
+#define pmd_dirty pmd_dirty
 static inline int pmd_dirty(pmd_t pmd)
 {
 	return !!(pmd_val(pmd) & (_PAGE_DIRTY | _PAGE_MODIFIED));
diff --git linux-libre-6.7-gnu/arch/loongarch/include/asm/shmparam.h linux-libre-6.8-gnu/arch/loongarch/include/asm/shmparam.h
deleted file mode 100644
index c9554f48d2df..000000000000
--- linux-libre-6.7-gnu/arch/loongarch/include/asm/shmparam.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
- */
-#ifndef _ASM_SHMPARAM_H
-#define _ASM_SHMPARAM_H
-
-#define __ARCH_FORCE_SHMLBA	1
-
-#define	SHMLBA	SZ_64K		 /* attach addr a multiple of this */
-
-#endif /* _ASM_SHMPARAM_H */
diff --git linux-libre-6.7-gnu/arch/loongarch/include/uapi/asm/kvm.h linux-libre-6.8-gnu/arch/loongarch/include/uapi/asm/kvm.h
index c6ad2ee6106c..923d0bd38294 100644
--- linux-libre-6.7-gnu/arch/loongarch/include/uapi/asm/kvm.h
+++ linux-libre-6.8-gnu/arch/loongarch/include/uapi/asm/kvm.h
@@ -79,6 +79,7 @@ struct kvm_fpu {
 #define LOONGARCH_REG_64(TYPE, REG)	(TYPE | KVM_REG_SIZE_U64 | (REG << LOONGARCH_REG_SHIFT))
 #define KVM_IOC_CSRID(REG)		LOONGARCH_REG_64(KVM_REG_LOONGARCH_CSR, REG)
 #define KVM_IOC_CPUCFG(REG)		LOONGARCH_REG_64(KVM_REG_LOONGARCH_CPUCFG, REG)
+#define KVM_LOONGARCH_VCPU_CPUCFG	0
 
 struct kvm_debug_exit_arch {
 };
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/acpi.c linux-libre-6.8-gnu/arch/loongarch/kernel/acpi.c
index 8e00a754e548..5cf59c617126 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/acpi.c
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/acpi.c
@@ -29,11 +29,9 @@ int disabled_cpus;
 
 u64 acpi_saved_sp;
 
-#define MAX_CORE_PIC 256
-
 #define PREFIX			"ACPI: "
 
-struct acpi_madt_core_pic acpi_core_pic[NR_CPUS];
+struct acpi_madt_core_pic acpi_core_pic[MAX_CORE_PIC];
 
 void __init __iomem * __acpi_map_table(unsigned long phys, unsigned long size)
 {
@@ -119,7 +117,7 @@ acpi_parse_eio_master(union acpi_subtable_headers *header, const unsigned long e
 		return -EINVAL;
 
 	core = eiointc->node * CORES_PER_EIO_NODE;
-	set_bit(core, &(loongson_sysconf.cores_io_master));
+	set_bit(core, loongson_sysconf.cores_io_master);
 
 	return 0;
 }
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/asm-offsets.c linux-libre-6.8-gnu/arch/loongarch/kernel/asm-offsets.c
index 173fe514fc9e..bee9f7a3108f 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/asm-offsets.c
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/asm-offsets.c
@@ -15,7 +15,7 @@
 #include <asm/processor.h>
 #include <asm/ftrace.h>
 
-void output_ptreg_defines(void)
+static void __used output_ptreg_defines(void)
 {
 	COMMENT("LoongArch pt_regs offsets.");
 	OFFSET(PT_R0, pt_regs, regs[0]);
@@ -62,7 +62,7 @@ void output_ptreg_defines(void)
 	BLANK();
 }
 
-void output_task_defines(void)
+static void __used output_task_defines(void)
 {
 	COMMENT("LoongArch task_struct offsets.");
 	OFFSET(TASK_STATE, task_struct, __state);
@@ -77,7 +77,7 @@ void output_task_defines(void)
 	BLANK();
 }
 
-void output_thread_info_defines(void)
+static void __used output_thread_info_defines(void)
 {
 	COMMENT("LoongArch thread_info offsets.");
 	OFFSET(TI_TASK, thread_info, task);
@@ -93,7 +93,7 @@ void output_thread_info_defines(void)
 	BLANK();
 }
 
-void output_thread_defines(void)
+static void __used output_thread_defines(void)
 {
 	COMMENT("LoongArch specific thread_struct offsets.");
 	OFFSET(THREAD_REG01, task_struct, thread.reg01);
@@ -129,7 +129,7 @@ void output_thread_defines(void)
 	BLANK();
 }
 
-void output_thread_fpu_defines(void)
+static void __used output_thread_fpu_defines(void)
 {
 	OFFSET(THREAD_FPR0, loongarch_fpu, fpr[0]);
 	OFFSET(THREAD_FPR1, loongarch_fpu, fpr[1]);
@@ -170,7 +170,7 @@ void output_thread_fpu_defines(void)
 	BLANK();
 }
 
-void output_thread_lbt_defines(void)
+static void __used output_thread_lbt_defines(void)
 {
 	OFFSET(THREAD_SCR0,  loongarch_lbt, scr0);
 	OFFSET(THREAD_SCR1,  loongarch_lbt, scr1);
@@ -180,7 +180,7 @@ void output_thread_lbt_defines(void)
 	BLANK();
 }
 
-void output_mm_defines(void)
+static void __used output_mm_defines(void)
 {
 	COMMENT("Size of struct page");
 	DEFINE(STRUCT_PAGE_SIZE, sizeof(struct page));
@@ -212,7 +212,7 @@ void output_mm_defines(void)
 	BLANK();
 }
 
-void output_sc_defines(void)
+static void __used output_sc_defines(void)
 {
 	COMMENT("Linux sigcontext offsets.");
 	OFFSET(SC_REGS, sigcontext, sc_regs);
@@ -220,7 +220,7 @@ void output_sc_defines(void)
 	BLANK();
 }
 
-void output_signal_defines(void)
+static void __used output_signal_defines(void)
 {
 	COMMENT("Linux signal numbers.");
 	DEFINE(_SIGHUP, SIGHUP);
@@ -258,7 +258,7 @@ void output_signal_defines(void)
 }
 
 #ifdef CONFIG_SMP
-void output_smpboot_defines(void)
+static void __used output_smpboot_defines(void)
 {
 	COMMENT("Linux smp cpu boot offsets.");
 	OFFSET(CPU_BOOT_STACK, secondary_data, stack);
@@ -268,7 +268,7 @@ void output_smpboot_defines(void)
 #endif
 
 #ifdef CONFIG_HIBERNATION
-void output_pbe_defines(void)
+static void __used output_pbe_defines(void)
 {
 	COMMENT("Linux struct pbe offsets.");
 	OFFSET(PBE_ADDRESS, pbe, address);
@@ -280,7 +280,7 @@ void output_pbe_defines(void)
 #endif
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-void output_fgraph_ret_regs_defines(void)
+static void __used output_fgraph_ret_regs_defines(void)
 {
 	COMMENT("LoongArch fgraph_ret_regs offsets.");
 	OFFSET(FGRET_REGS_A0, fgraph_ret_regs, regs[0]);
@@ -291,7 +291,7 @@ void output_fgraph_ret_regs_defines(void)
 }
 #endif
 
-void output_kvm_defines(void)
+static void __used output_kvm_defines(void)
 {
 	COMMENT("KVM/LoongArch Specific offsets.");
 
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/efi.c linux-libre-6.8-gnu/arch/loongarch/kernel/efi.c
index acb5d3385675..000825406c1f 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/efi.c
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/efi.c
@@ -140,4 +140,6 @@ void __init efi_init(void)
 
 		early_memunmap(tbl, sizeof(*tbl));
 	}
+
+	efi_esrt_init();
 }
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/elf.c linux-libre-6.8-gnu/arch/loongarch/kernel/elf.c
index 183e94fc9c69..0fa81ced28dc 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/elf.c
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/elf.c
@@ -23,8 +23,3 @@ int arch_check_elf(void *_ehdr, bool has_interpreter, void *_interp_ehdr,
 {
 	return 0;
 }
-
-void loongarch_set_personality_fcsr(struct arch_elf_state *state)
-{
-	current->thread.fpu.fcsr = boot_cpu_data.fpu_csr0;
-}
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/env.c linux-libre-6.8-gnu/arch/loongarch/kernel/env.c
index 6b3bfb0092e6..2f1f5b08638f 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/env.c
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/env.c
@@ -5,13 +5,16 @@
  * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
  */
 #include <linux/acpi.h>
+#include <linux/clk.h>
 #include <linux/efi.h>
 #include <linux/export.h>
 #include <linux/memblock.h>
+#include <linux/of_clk.h>
 #include <asm/early_ioremap.h>
 #include <asm/bootinfo.h>
 #include <asm/loongson.h>
 #include <asm/setup.h>
+#include <asm/time.h>
 
 u64 efi_system_table;
 struct loongson_system_configuration loongson_sysconf;
@@ -36,7 +39,16 @@ void __init init_environ(void)
 
 static int __init init_cpu_fullname(void)
 {
-	int cpu;
+	struct device_node *root;
+	int cpu, ret;
+	char *model;
+
+	/* Parsing cpuname from DTS model property */
+	root = of_find_node_by_path("/");
+	ret = of_property_read_string(root, "model", (const char **)&model);
+	of_node_put(root);
+	if (ret == 0)
+		loongson_sysconf.cpuname = strsep(&model, " ");
 
 	if (loongson_sysconf.cpuname && !strncmp(loongson_sysconf.cpuname, "Loongson", 8)) {
 		for (cpu = 0; cpu < NR_CPUS; cpu++)
@@ -46,6 +58,26 @@ static int __init init_cpu_fullname(void)
 }
 arch_initcall(init_cpu_fullname);
 
+static int __init fdt_cpu_clk_init(void)
+{
+	struct clk *clk;
+	struct device_node *np;
+
+	np = of_get_cpu_node(0, NULL);
+	if (!np)
+		return -ENODEV;
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk))
+		return -ENODEV;
+
+	cpu_clock_freq = clk_get_rate(clk);
+	clk_put(clk);
+
+	return 0;
+}
+late_initcall(fdt_cpu_clk_init);
+
 static ssize_t boardinfo_show(struct kobject *kobj,
 			      struct kobj_attribute *attr, char *buf)
 {
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/fpu.S linux-libre-6.8-gnu/arch/loongarch/kernel/fpu.S
index d53ab10f4644..4382e36ae3d4 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/fpu.S
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/fpu.S
@@ -349,6 +349,7 @@ SYM_FUNC_START(_restore_lsx_upper)
 	lsx_restore_all_upper a0 t0 t1
 	jr	ra
 SYM_FUNC_END(_restore_lsx_upper)
+EXPORT_SYMBOL(_restore_lsx_upper)
 
 SYM_FUNC_START(_init_lsx_upper)
 	lsx_init_all_upper t1
@@ -384,6 +385,7 @@ SYM_FUNC_START(_restore_lasx_upper)
 	lasx_restore_all_upper a0 t0 t1
 	jr	ra
 SYM_FUNC_END(_restore_lasx_upper)
+EXPORT_SYMBOL(_restore_lasx_upper)
 
 SYM_FUNC_START(_init_lasx_upper)
 	lasx_init_all_upper t1
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/head.S linux-libre-6.8-gnu/arch/loongarch/kernel/head.S
index 53b883db0786..c4f7de2e2805 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/head.S
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/head.S
@@ -34,7 +34,6 @@ pe_header:
 
 SYM_DATA(kernel_asize, .long _kernel_asize);
 SYM_DATA(kernel_fsize, .long _kernel_fsize);
-SYM_DATA(kernel_offset, .long _kernel_offset);
 
 #endif
 
@@ -75,6 +74,11 @@ SYM_CODE_START(kernel_entry)			# kernel entry point
 	la.pcrel	t0, fw_arg2
 	st.d		a2, t0, 0
 
+#ifdef CONFIG_PAGE_SIZE_4KB
+	li.d		t0, 0
+	li.d		t1, CSR_STFILL
+	csrxchg		t0, t1, LOONGARCH_CSR_IMPCTL1
+#endif
 	/* KSave3 used for percpu base, initialized as 0 */
 	csrwr		zero, PERCPU_BASE_KS
 	/* GPR21 used for percpu base (runtime), initialized as 0 */
@@ -127,6 +131,11 @@ SYM_CODE_START(smpboot_entry)
 
 	JUMP_VIRT_ADDR	t0, t1
 
+#ifdef CONFIG_PAGE_SIZE_4KB
+	li.d		t0, 0
+	li.d		t1, CSR_STFILL
+	csrxchg		t0, t1, LOONGARCH_CSR_IMPCTL1
+#endif
 	/* Enable PG */
 	li.w		t0, 0xb0		# PLV=0, IE=0, PG=1
 	csrwr		t0, LOONGARCH_CSR_CRMD
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/image-vars.h linux-libre-6.8-gnu/arch/loongarch/kernel/image-vars.h
index 5087416b9678..41ddcf56d21c 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/image-vars.h
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/image-vars.h
@@ -11,7 +11,6 @@ __efistub_strcmp		= strcmp;
 __efistub_kernel_entry		= kernel_entry;
 __efistub_kernel_asize		= kernel_asize;
 __efistub_kernel_fsize		= kernel_fsize;
-__efistub_kernel_offset		= kernel_offset;
 #if defined(CONFIG_EFI_EARLYCON) || defined(CONFIG_SYSFB)
 __efistub_screen_info		= screen_info;
 #endif
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/numa.c linux-libre-6.8-gnu/arch/loongarch/kernel/numa.c
index 6e65ff12d5c7..8fe21f868f72 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/numa.c
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/numa.c
@@ -226,32 +226,6 @@ static void __init node_mem_init(unsigned int node)
 
 #ifdef CONFIG_ACPI_NUMA
 
-/*
- * Sanity check to catch more bad NUMA configurations (they are amazingly
- * common).  Make sure the nodes cover all memory.
- */
-static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
-{
-	int i;
-	u64 numaram, biosram;
-
-	numaram = 0;
-	for (i = 0; i < mi->nr_blks; i++) {
-		u64 s = mi->blk[i].start >> PAGE_SHIFT;
-		u64 e = mi->blk[i].end >> PAGE_SHIFT;
-
-		numaram += e - s;
-		numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e);
-		if ((s64)numaram < 0)
-			numaram = 0;
-	}
-	max_pfn = max_low_pfn;
-	biosram = max_pfn - absent_pages_in_range(0, max_pfn);
-
-	BUG_ON((s64)(biosram - numaram) >= (1 << (20 - PAGE_SHIFT)));
-	return true;
-}
-
 static void __init add_node_intersection(u32 node, u64 start, u64 size, u32 type)
 {
 	static unsigned long num_physpages;
@@ -396,7 +370,7 @@ int __init init_numa_memory(void)
 		return -EINVAL;
 
 	init_node_memblock();
-	if (numa_meminfo_cover_memory(&numa_meminfo) == false)
+	if (!memblock_validate_numa_coverage(SZ_1M))
 		return -EINVAL;
 
 	for_each_node_mask(node, node_possible_map) {
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/process.c linux-libre-6.8-gnu/arch/loongarch/kernel/process.c
index 767d94cce0de..f2ff8b5d591e 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/process.c
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/process.c
@@ -85,6 +85,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp)
 	regs->csr_euen = euen;
 	lose_fpu(0);
 	lose_lbt(0);
+	current->thread.fpu.fcsr = boot_cpu_data.fpu_csr0;
 
 	clear_thread_flag(TIF_LSX_CTX_LIVE);
 	clear_thread_flag(TIF_LASX_CTX_LIVE);
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/setup.c linux-libre-6.8-gnu/arch/loongarch/kernel/setup.c
index d183a745fb85..634ef17fd38b 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/setup.c
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/setup.c
@@ -252,38 +252,23 @@ static void __init arch_reserve_vmcore(void)
 #endif
 }
 
-/* 2MB alignment for crash kernel regions */
-#define CRASH_ALIGN	SZ_2M
-#define CRASH_ADDR_MAX	SZ_4G
-
-static void __init arch_parse_crashkernel(void)
+static void __init arch_reserve_crashkernel(void)
 {
-#ifdef CONFIG_KEXEC
 	int ret;
-	unsigned long long total_mem;
+	unsigned long long low_size = 0;
 	unsigned long long crash_base, crash_size;
+	char *cmdline = boot_command_line;
+	bool high = false;
 
-	total_mem = memblock_phys_mem_size();
-	ret = parse_crashkernel(boot_command_line, total_mem,
-				&crash_size, &crash_base,
-				NULL, NULL);
-	if (ret < 0 || crash_size <= 0)
+	if (!IS_ENABLED(CONFIG_KEXEC_CORE))
 		return;
 
-	if (crash_base <= 0) {
-		crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN, CRASH_ALIGN, CRASH_ADDR_MAX);
-		if (!crash_base) {
-			pr_warn("crashkernel reservation failed - No suitable area found.\n");
-			return;
-		}
-	} else if (!memblock_phys_alloc_range(crash_size, CRASH_ALIGN, crash_base, crash_base + crash_size)) {
-		pr_warn("Invalid memory region reserved for crash kernel\n");
+	ret = parse_crashkernel(cmdline, memblock_phys_mem_size(),
+				&crash_size, &crash_base, &low_size, &high);
+	if (ret)
 		return;
-	}
 
-	crashk_res.start = crash_base;
-	crashk_res.end	 = crash_base + crash_size - 1;
-#endif
+	reserve_crashkernel_generic(cmdline, crash_size, crash_base, low_size, high);
 }
 
 static void __init fdt_setup(void)
@@ -295,8 +280,12 @@ static void __init fdt_setup(void)
 	if (acpi_os_get_root_pointer())
 		return;
 
-	/* Look for a device tree configuration table entry */
-	fdt_pointer = efi_fdt_pointer();
+	/* Prefer to use built-in dtb, checking its legality first. */
+	if (!fdt_check_header(__dtb_start))
+		fdt_pointer = __dtb_start;
+	else
+		fdt_pointer = efi_fdt_pointer(); /* Fallback to firmware dtb */
+
 	if (!fdt_pointer || fdt_check_header(fdt_pointer))
 		return;
 
@@ -330,7 +319,9 @@ static void __init bootcmdline_init(char **cmdline_p)
 		if (boot_command_line[0])
 			strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
 
-		strlcat(boot_command_line, init_command_line, COMMAND_LINE_SIZE);
+		if (!strstr(boot_command_line, init_command_line))
+			strlcat(boot_command_line, init_command_line, COMMAND_LINE_SIZE);
+
 		goto out;
 	}
 #endif
@@ -357,7 +348,7 @@ out:
 void __init platform_init(void)
 {
 	arch_reserve_vmcore();
-	arch_parse_crashkernel();
+	arch_reserve_crashkernel();
 
 #ifdef CONFIG_ACPI_TABLE_UPGRADE
 	acpi_table_upgrade();
@@ -366,6 +357,8 @@ void __init platform_init(void)
 	acpi_gbl_use_default_register_widths = false;
 	acpi_boot_table_init();
 #endif
+
+	early_init_fdt_scan_reserved_mem();
 	unflatten_and_copy_device_tree();
 
 #ifdef CONFIG_NUMA
@@ -399,8 +392,6 @@ static void __init arch_mem_init(char **cmdline_p)
 
 	check_kernel_sections_mem();
 
-	early_init_fdt_scan_reserved_mem();
-
 	/*
 	 * In order to reduce the possibility of kernel panic when failed to
 	 * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate
@@ -467,15 +458,6 @@ static void __init resource_init(void)
 		request_resource(res, &data_resource);
 		request_resource(res, &bss_resource);
 	}
-
-#ifdef CONFIG_KEXEC
-	if (crashk_res.start < crashk_res.end) {
-		insert_resource(&iomem_resource, &crashk_res);
-		pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n",
-			(unsigned long)((crashk_res.end - crashk_res.start + 1) >> 20),
-			(unsigned long)(crashk_res.start  >> 20));
-	}
-#endif
 }
 
 static int __init add_legacy_isa_io(struct fwnode_handle *fwnode,
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/signal.c linux-libre-6.8-gnu/arch/loongarch/kernel/signal.c
index 4a3686d13349..7a555b600171 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/signal.c
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/signal.c
@@ -15,6 +15,7 @@
 #include <linux/context_tracking.h>
 #include <linux/entry-common.h>
 #include <linux/irqflags.h>
+#include <linux/rseq.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/personality.h>
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/smp.c linux-libre-6.8-gnu/arch/loongarch/kernel/smp.c
index 5bca12d16e06..aabee0b280fe 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/smp.c
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/smp.c
@@ -88,6 +88,73 @@ void show_ipi_list(struct seq_file *p, int prec)
 	}
 }
 
+static inline void set_cpu_core_map(int cpu)
+{
+	int i;
+
+	cpumask_set_cpu(cpu, &cpu_core_setup_map);
+
+	for_each_cpu(i, &cpu_core_setup_map) {
+		if (cpu_data[cpu].package == cpu_data[i].package) {
+			cpumask_set_cpu(i, &cpu_core_map[cpu]);
+			cpumask_set_cpu(cpu, &cpu_core_map[i]);
+		}
+	}
+}
+
+static inline void set_cpu_sibling_map(int cpu)
+{
+	int i;
+
+	cpumask_set_cpu(cpu, &cpu_sibling_setup_map);
+
+	for_each_cpu(i, &cpu_sibling_setup_map) {
+		if (cpus_are_siblings(cpu, i)) {
+			cpumask_set_cpu(i, &cpu_sibling_map[cpu]);
+			cpumask_set_cpu(cpu, &cpu_sibling_map[i]);
+		}
+	}
+}
+
+static inline void clear_cpu_sibling_map(int cpu)
+{
+	int i;
+
+	for_each_cpu(i, &cpu_sibling_setup_map) {
+		if (cpus_are_siblings(cpu, i)) {
+			cpumask_clear_cpu(i, &cpu_sibling_map[cpu]);
+			cpumask_clear_cpu(cpu, &cpu_sibling_map[i]);
+		}
+	}
+
+	cpumask_clear_cpu(cpu, &cpu_sibling_setup_map);
+}
+
+/*
+ * Calculate a new cpu_foreign_map mask whenever a
+ * new cpu appears or disappears.
+ */
+void calculate_cpu_foreign_map(void)
+{
+	int i, k, core_present;
+	cpumask_t temp_foreign_map;
+
+	/* Re-calculate the mask */
+	cpumask_clear(&temp_foreign_map);
+	for_each_online_cpu(i) {
+		core_present = 0;
+		for_each_cpu(k, &temp_foreign_map)
+			if (cpus_are_siblings(i, k))
+				core_present = 1;
+		if (!core_present)
+			cpumask_set_cpu(i, &temp_foreign_map);
+	}
+
+	for_each_online_cpu(i)
+		cpumask_andnot(&cpu_foreign_map[i],
+			       &temp_foreign_map, &cpu_sibling_map[i]);
+}
+
 /* Send mailbox buffer via Mail_Send */
 static void csr_mail_send(uint64_t data, int cpu, int mailbox)
 {
@@ -208,7 +275,7 @@ static void __init fdt_smp_setup(void)
 	}
 
 	loongson_sysconf.nr_cpus = num_processors;
-	set_bit(0, &(loongson_sysconf.cores_io_master));
+	set_bit(0, loongson_sysconf.cores_io_master);
 #endif
 }
 
@@ -216,6 +283,9 @@ void __init loongson_smp_setup(void)
 {
 	fdt_smp_setup();
 
+	if (loongson_sysconf.cores_per_package == 0)
+		loongson_sysconf.cores_per_package = num_processors;
+
 	cpu_data[0].core = cpu_logical_map(0) % loongson_sysconf.cores_per_package;
 	cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package;
 
@@ -300,6 +370,7 @@ int loongson_cpu_disable(void)
 	numa_remove_cpu(cpu);
 #endif
 	set_cpu_online(cpu, false);
+	clear_cpu_sibling_map(cpu);
 	calculate_cpu_foreign_map();
 	local_irq_save(flags);
 	irq_migrate_all_off_this_cpu();
@@ -334,6 +405,7 @@ void __noreturn arch_cpu_idle_dead(void)
 		addr = iocsr_read64(LOONGARCH_IOCSR_MBUF0);
 	} while (addr == 0);
 
+	local_irq_disable();
 	init_fn = (void *)TO_CACHE(addr);
 	iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_CLEAR);
 
@@ -376,59 +448,6 @@ static int __init ipi_pm_init(void)
 core_initcall(ipi_pm_init);
 #endif
 
-static inline void set_cpu_sibling_map(int cpu)
-{
-	int i;
-
-	cpumask_set_cpu(cpu, &cpu_sibling_setup_map);
-
-	for_each_cpu(i, &cpu_sibling_setup_map) {
-		if (cpus_are_siblings(cpu, i)) {
-			cpumask_set_cpu(i, &cpu_sibling_map[cpu]);
-			cpumask_set_cpu(cpu, &cpu_sibling_map[i]);
-		}
-	}
-}
-
-static inline void set_cpu_core_map(int cpu)
-{
-	int i;
-
-	cpumask_set_cpu(cpu, &cpu_core_setup_map);
-
-	for_each_cpu(i, &cpu_core_setup_map) {
-		if (cpu_data[cpu].package == cpu_data[i].package) {
-			cpumask_set_cpu(i, &cpu_core_map[cpu]);
-			cpumask_set_cpu(cpu, &cpu_core_map[i]);
-		}
-	}
-}
-
-/*
- * Calculate a new cpu_foreign_map mask whenever a
- * new cpu appears or disappears.
- */
-void calculate_cpu_foreign_map(void)
-{
-	int i, k, core_present;
-	cpumask_t temp_foreign_map;
-
-	/* Re-calculate the mask */
-	cpumask_clear(&temp_foreign_map);
-	for_each_online_cpu(i) {
-		core_present = 0;
-		for_each_cpu(k, &temp_foreign_map)
-			if (cpus_are_siblings(i, k))
-				core_present = 1;
-		if (!core_present)
-			cpumask_set_cpu(i, &temp_foreign_map);
-	}
-
-	for_each_online_cpu(i)
-		cpumask_andnot(&cpu_foreign_map[i],
-			       &temp_foreign_map, &cpu_sibling_map[i]);
-}
-
 /* Preload SMP state for boot cpu */
 void smp_prepare_boot_cpu(void)
 {
@@ -506,7 +525,6 @@ asmlinkage void start_secondary(void)
 	sync_counter();
 	cpu = raw_smp_processor_id();
 	set_my_cpu_offset(per_cpu_offset(cpu));
-	rcutree_report_cpu_starting(cpu);
 
 	cpu_probe();
 	constant_clockevent_init();
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/topology.c linux-libre-6.8-gnu/arch/loongarch/kernel/topology.c
index 3fd166006698..75d5c51a7cd3 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/topology.c
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/topology.c
@@ -10,47 +10,9 @@
 
 #include <acpi/processor.h>
 
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
-
 #ifdef CONFIG_HOTPLUG_CPU
-int arch_register_cpu(int cpu)
+bool arch_cpu_is_hotpluggable(int cpu)
 {
-	int ret;
-	struct cpu *c = &per_cpu(cpu_devices, cpu);
-
-	c->hotpluggable = 1;
-	ret = register_cpu(c, cpu);
-	if (ret < 0)
-		pr_warn("register_cpu %d failed (%d)\n", cpu, ret);
-
-	return ret;
-}
-EXPORT_SYMBOL(arch_register_cpu);
-
-void arch_unregister_cpu(int cpu)
-{
-	struct cpu *c = &per_cpu(cpu_devices, cpu);
-
-	c->hotpluggable = 0;
-	unregister_cpu(c);
+	return !io_master(cpu);
 }
-EXPORT_SYMBOL(arch_unregister_cpu);
 #endif
-
-static int __init topology_init(void)
-{
-	int i, ret;
-
-	for_each_present_cpu(i) {
-		struct cpu *c = &per_cpu(cpu_devices, i);
-
-		c->hotpluggable = !io_master(i);
-		ret = register_cpu(c, i);
-		if (ret < 0)
-			pr_warn("topology_init: register_cpu %d failed (%d)\n", i, ret);
-	}
-
-	return 0;
-}
-
-subsys_initcall(topology_init);
diff --git linux-libre-6.7-gnu/arch/loongarch/kernel/vmlinux.lds.S linux-libre-6.8-gnu/arch/loongarch/kernel/vmlinux.lds.S
index bb2ec86f37a8..a5d0cd2035da 100644
--- linux-libre-6.7-gnu/arch/loongarch/kernel/vmlinux.lds.S
+++ linux-libre-6.8-gnu/arch/loongarch/kernel/vmlinux.lds.S
@@ -143,7 +143,6 @@ SECTIONS
 	_kernel_fsize = _edata - _text;
 	_kernel_vsize = _end - __initdata_begin;
 	_kernel_rsize = _edata - __initdata_begin;
-	_kernel_offset = kernel_offset - _text;
 #endif
 
 	.gptab.sdata : {
diff --git linux-libre-6.7-gnu/arch/loongarch/kvm/Kconfig linux-libre-6.8-gnu/arch/loongarch/kvm/Kconfig
index fda425babfb2..61f7e33b1f95 100644
--- linux-libre-6.7-gnu/arch/loongarch/kvm/Kconfig
+++ linux-libre-6.8-gnu/arch/loongarch/kvm/Kconfig
@@ -22,14 +22,13 @@ config KVM
 	depends on AS_HAS_LVZ_EXTENSION
 	depends on HAVE_KVM
 	select HAVE_KVM_DIRTY_RING_ACQ_REL
-	select HAVE_KVM_EVENTFD
 	select HAVE_KVM_VCPU_ASYNC_IOCTL
+	select KVM_COMMON
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
 	select KVM_GENERIC_HARDWARE_ENABLING
+	select KVM_GENERIC_MMU_NOTIFIER
 	select KVM_MMIO
 	select KVM_XFER_TO_GUEST_WORK
-	select MMU_NOTIFIER
-	select PREEMPT_NOTIFIERS
 	help
 	  Support hosting virtualized guest machines using
 	  hardware virtualization extensions. You will need
diff --git linux-libre-6.7-gnu/arch/loongarch/kvm/exit.c linux-libre-6.8-gnu/arch/loongarch/kvm/exit.c
index ce8de3fa472c..ed1d89d53e2e 100644
--- linux-libre-6.7-gnu/arch/loongarch/kvm/exit.c
+++ linux-libre-6.8-gnu/arch/loongarch/kvm/exit.c
@@ -200,17 +200,8 @@ int kvm_emu_idle(struct kvm_vcpu *vcpu)
 	++vcpu->stat.idle_exits;
 	trace_kvm_exit_idle(vcpu, KVM_TRACE_EXIT_IDLE);
 
-	if (!kvm_arch_vcpu_runnable(vcpu)) {
-		/*
-		 * Switch to the software timer before halt-polling/blocking as
-		 * the guest's timer may be a break event for the vCPU, and the
-		 * hypervisor timer runs only when the CPU is in guest mode.
-		 * Switch before halt-polling so that KVM recognizes an expired
-		 * timer before blocking.
-		 */
-		kvm_save_timer(vcpu);
-		kvm_vcpu_block(vcpu);
-	}
+	if (!kvm_arch_vcpu_runnable(vcpu))
+		kvm_vcpu_halt(vcpu);
 
 	return EMULATE_DONE;
 }
@@ -643,6 +634,11 @@ static int kvm_handle_fpu_disabled(struct kvm_vcpu *vcpu)
 {
 	struct kvm_run *run = vcpu->run;
 
+	if (!kvm_guest_has_fpu(&vcpu->arch)) {
+		kvm_queue_exception(vcpu, EXCCODE_INE, 0);
+		return RESUME_GUEST;
+	}
+
 	/*
 	 * If guest FPU not present, the FPU operation should have been
 	 * treated as a reserved instruction!
@@ -659,6 +655,36 @@ static int kvm_handle_fpu_disabled(struct kvm_vcpu *vcpu)
 	return RESUME_GUEST;
 }
 
+/*
+ * kvm_handle_lsx_disabled() - Guest used LSX while disabled in root.
+ * @vcpu:      Virtual CPU context.
+ *
+ * Handle when the guest attempts to use LSX when it is disabled in the root
+ * context.
+ */
+static int kvm_handle_lsx_disabled(struct kvm_vcpu *vcpu)
+{
+	if (kvm_own_lsx(vcpu))
+		kvm_queue_exception(vcpu, EXCCODE_INE, 0);
+
+	return RESUME_GUEST;
+}
+
+/*
+ * kvm_handle_lasx_disabled() - Guest used LASX while disabled in root.
+ * @vcpu:	Virtual CPU context.
+ *
+ * Handle when the guest attempts to use LASX when it is disabled in the root
+ * context.
+ */
+static int kvm_handle_lasx_disabled(struct kvm_vcpu *vcpu)
+{
+	if (kvm_own_lasx(vcpu))
+		kvm_queue_exception(vcpu, EXCCODE_INE, 0);
+
+	return RESUME_GUEST;
+}
+
 /*
  * LoongArch KVM callback handling for unimplemented guest exiting
  */
@@ -687,6 +713,8 @@ static exit_handle_fn kvm_fault_tables[EXCCODE_INT_START] = {
 	[EXCCODE_TLBS]			= kvm_handle_write_fault,
 	[EXCCODE_TLBM]			= kvm_handle_write_fault,
 	[EXCCODE_FPDIS]			= kvm_handle_fpu_disabled,
+	[EXCCODE_LSXDIS]		= kvm_handle_lsx_disabled,
+	[EXCCODE_LASXDIS]		= kvm_handle_lasx_disabled,
 	[EXCCODE_GSPR]			= kvm_handle_gspr,
 };
 
diff --git linux-libre-6.7-gnu/arch/loongarch/kvm/main.c linux-libre-6.8-gnu/arch/loongarch/kvm/main.c
index 1c1d5199500e..86a2f2d0cb27 100644
--- linux-libre-6.7-gnu/arch/loongarch/kvm/main.c
+++ linux-libre-6.8-gnu/arch/loongarch/kvm/main.c
@@ -287,7 +287,6 @@ int kvm_arch_hardware_enable(void)
 	if (env & CSR_GCFG_MATC_ROOT)
 		gcfg |= CSR_GCFG_MATC_ROOT;
 
-	gcfg |= CSR_GCFG_TIT;
 	write_csr_gcfg(gcfg);
 
 	kvm_flush_tlb_all();
diff --git linux-libre-6.7-gnu/arch/loongarch/kvm/mmu.c linux-libre-6.8-gnu/arch/loongarch/kvm/mmu.c
index 80480df5f550..50a6acd7ffe4 100644
--- linux-libre-6.7-gnu/arch/loongarch/kvm/mmu.c
+++ linux-libre-6.8-gnu/arch/loongarch/kvm/mmu.c
@@ -13,6 +13,16 @@
 #include <asm/tlb.h>
 #include <asm/kvm_mmu.h>
 
+static inline bool kvm_hugepage_capable(struct kvm_memory_slot *slot)
+{
+	return slot->arch.flags & KVM_MEM_HUGEPAGE_CAPABLE;
+}
+
+static inline bool kvm_hugepage_incapable(struct kvm_memory_slot *slot)
+{
+	return slot->arch.flags & KVM_MEM_HUGEPAGE_INCAPABLE;
+}
+
 static inline void kvm_ptw_prepare(struct kvm *kvm, kvm_ptw_ctx *ctx)
 {
 	ctx->level = kvm->arch.root_level;
@@ -365,6 +375,69 @@ void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm,
 	kvm_ptw_top(kvm->arch.pgd, start << PAGE_SHIFT, end << PAGE_SHIFT, &ctx);
 }
 
+int kvm_arch_prepare_memory_region(struct kvm *kvm, const struct kvm_memory_slot *old,
+				   struct kvm_memory_slot *new, enum kvm_mr_change change)
+{
+	gpa_t gpa_start;
+	hva_t hva_start;
+	size_t size, gpa_offset, hva_offset;
+
+	if ((change != KVM_MR_MOVE) && (change != KVM_MR_CREATE))
+		return 0;
+	/*
+	 * Prevent userspace from creating a memory region outside of the
+	 * VM GPA address space
+	 */
+	if ((new->base_gfn + new->npages) > (kvm->arch.gpa_size >> PAGE_SHIFT))
+		return -ENOMEM;
+
+	new->arch.flags = 0;
+	size = new->npages * PAGE_SIZE;
+	gpa_start = new->base_gfn << PAGE_SHIFT;
+	hva_start = new->userspace_addr;
+	if (IS_ALIGNED(size, PMD_SIZE) && IS_ALIGNED(gpa_start, PMD_SIZE)
+			&& IS_ALIGNED(hva_start, PMD_SIZE))
+		new->arch.flags |= KVM_MEM_HUGEPAGE_CAPABLE;
+	else {
+		/*
+		 * Pages belonging to memslots that don't have the same
+		 * alignment within a PMD for userspace and GPA cannot be
+		 * mapped with PMD entries, because we'll end up mapping
+		 * the wrong pages.
+		 *
+		 * Consider a layout like the following:
+		 *
+		 *    memslot->userspace_addr:
+		 *    +-----+--------------------+--------------------+---+
+		 *    |abcde|fgh  Stage-1 block  |    Stage-1 block tv|xyz|
+		 *    +-----+--------------------+--------------------+---+
+		 *
+		 *    memslot->base_gfn << PAGE_SIZE:
+		 *      +---+--------------------+--------------------+-----+
+		 *      |abc|def  Stage-2 block  |    Stage-2 block   |tvxyz|
+		 *      +---+--------------------+--------------------+-----+
+		 *
+		 * If we create those stage-2 blocks, we'll end up with this
+		 * incorrect mapping:
+		 *   d -> f
+		 *   e -> g
+		 *   f -> h
+		 */
+		gpa_offset = gpa_start & (PMD_SIZE - 1);
+		hva_offset = hva_start & (PMD_SIZE - 1);
+		if (gpa_offset != hva_offset) {
+			new->arch.flags |= KVM_MEM_HUGEPAGE_INCAPABLE;
+		} else {
+			if (gpa_offset == 0)
+				gpa_offset = PMD_SIZE;
+			if ((size + gpa_offset) < (PMD_SIZE * 2))
+				new->arch.flags |= KVM_MEM_HUGEPAGE_INCAPABLE;
+		}
+	}
+
+	return 0;
+}
+
 void kvm_arch_commit_memory_region(struct kvm *kvm,
 				   struct kvm_memory_slot *old,
 				   const struct kvm_memory_slot *new,
@@ -562,47 +635,23 @@ out:
 }
 
 static bool fault_supports_huge_mapping(struct kvm_memory_slot *memslot,
-				unsigned long hva, unsigned long map_size, bool write)
+				unsigned long hva, bool write)
 {
-	size_t size;
-	gpa_t gpa_start;
-	hva_t uaddr_start, uaddr_end;
+	hva_t start, end;
 
 	/* Disable dirty logging on HugePages */
 	if (kvm_slot_dirty_track_enabled(memslot) && write)
 		return false;
 
-	size = memslot->npages * PAGE_SIZE;
-	gpa_start = memslot->base_gfn << PAGE_SHIFT;
-	uaddr_start = memslot->userspace_addr;
-	uaddr_end = uaddr_start + size;
+	if (kvm_hugepage_capable(memslot))
+		return true;
 
-	/*
-	 * Pages belonging to memslots that don't have the same alignment
-	 * within a PMD for userspace and GPA cannot be mapped with stage-2
-	 * PMD entries, because we'll end up mapping the wrong pages.
-	 *
-	 * Consider a layout like the following:
-	 *
-	 *    memslot->userspace_addr:
-	 *    +-----+--------------------+--------------------+---+
-	 *    |abcde|fgh  Stage-1 block  |    Stage-1 block tv|xyz|
-	 *    +-----+--------------------+--------------------+---+
-	 *
-	 *    memslot->base_gfn << PAGE_SIZE:
-	 *      +---+--------------------+--------------------+-----+
-	 *      |abc|def  Stage-2 block  |    Stage-2 block   |tvxyz|
-	 *      +---+--------------------+--------------------+-----+
-	 *
-	 * If we create those stage-2 blocks, we'll end up with this incorrect
-	 * mapping:
-	 *   d -> f
-	 *   e -> g
-	 *   f -> h
-	 */
-	if ((gpa_start & (map_size - 1)) != (uaddr_start & (map_size - 1)))
+	if (kvm_hugepage_incapable(memslot))
 		return false;
 
+	start = memslot->userspace_addr;
+	end = start + memslot->npages * PAGE_SIZE;
+
 	/*
 	 * Next, let's make sure we're not trying to map anything not covered
 	 * by the memslot. This means we have to prohibit block size mappings
@@ -615,8 +664,7 @@ static bool fault_supports_huge_mapping(struct kvm_memory_slot *memslot,
 	 * userspace_addr or the base_gfn, as both are equally aligned (per
 	 * the check above) and equally sized.
 	 */
-	return (hva & ~(map_size - 1)) >= uaddr_start &&
-		(hva & ~(map_size - 1)) + map_size <= uaddr_end;
+	return (hva >= ALIGN(start, PMD_SIZE)) && (hva < ALIGN_DOWN(end, PMD_SIZE));
 }
 
 /*
@@ -627,7 +675,7 @@ static bool fault_supports_huge_mapping(struct kvm_memory_slot *memslot,
  *
  * There are several ways to safely use this helper:
  *
- * - Check mmu_invalidate_retry_hva() after grabbing the mapping level, before
+ * - Check mmu_invalidate_retry_gfn() after grabbing the mapping level, before
  *   consuming it.  In this case, mmu_lock doesn't need to be held during the
  *   lookup, but it does need to be held while checking the MMU notifier.
  *
@@ -807,7 +855,7 @@ retry:
 
 	/* Check if an invalidation has taken place since we got pfn */
 	spin_lock(&kvm->mmu_lock);
-	if (mmu_invalidate_retry_hva(kvm, mmu_seq, hva)) {
+	if (mmu_invalidate_retry_gfn(kvm, mmu_seq, gfn)) {
 		/*
 		 * This can happen when mappings are changed asynchronously, but
 		 * also synchronously if a COW is triggered by
@@ -842,7 +890,7 @@ retry:
 
 	/* Disable dirty logging on HugePages */
 	level = 0;
-	if (!fault_supports_huge_mapping(memslot, hva, PMD_SIZE, write)) {
+	if (!fault_supports_huge_mapping(memslot, hva, write)) {
 		level = 0;
 	} else {
 		level = host_pfn_mapping_level(kvm, gfn, memslot);
@@ -901,12 +949,6 @@ void kvm_arch_sync_dirty_log(struct kvm *kvm, struct kvm_memory_slot *memslot)
 {
 }
 
-int kvm_arch_prepare_memory_region(struct kvm *kvm, const struct kvm_memory_slot *old,
-				   struct kvm_memory_slot *new, enum kvm_mr_change change)
-{
-	return 0;
-}
-
 void kvm_arch_flush_remote_tlbs_memslot(struct kvm *kvm,
 					const struct kvm_memory_slot *memslot)
 {
diff --git linux-libre-6.7-gnu/arch/loongarch/kvm/switch.S linux-libre-6.8-gnu/arch/loongarch/kvm/switch.S
index 0ed9040307b7..ba976509bfe8 100644
--- linux-libre-6.7-gnu/arch/loongarch/kvm/switch.S
+++ linux-libre-6.8-gnu/arch/loongarch/kvm/switch.S
@@ -245,6 +245,37 @@ SYM_FUNC_START(kvm_restore_fpu)
 	jr                 ra
 SYM_FUNC_END(kvm_restore_fpu)
 
+#ifdef CONFIG_CPU_HAS_LSX
+SYM_FUNC_START(kvm_save_lsx)
+	fpu_save_csr    a0 t1
+	fpu_save_cc     a0 t1 t2
+	lsx_save_data   a0 t1
+	jr              ra
+SYM_FUNC_END(kvm_save_lsx)
+
+SYM_FUNC_START(kvm_restore_lsx)
+	lsx_restore_data a0 t1
+	fpu_restore_cc   a0 t1 t2
+	fpu_restore_csr  a0 t1 t2
+	jr               ra
+SYM_FUNC_END(kvm_restore_lsx)
+#endif
+
+#ifdef CONFIG_CPU_HAS_LASX
+SYM_FUNC_START(kvm_save_lasx)
+	fpu_save_csr    a0 t1
+	fpu_save_cc     a0 t1 t2
+	lasx_save_data  a0 t1
+	jr              ra
+SYM_FUNC_END(kvm_save_lasx)
+
+SYM_FUNC_START(kvm_restore_lasx)
+	lasx_restore_data a0 t1
+	fpu_restore_cc    a0 t1 t2
+	fpu_restore_csr   a0 t1 t2
+	jr                ra
+SYM_FUNC_END(kvm_restore_lasx)
+#endif
 	.section ".rodata"
 SYM_DATA(kvm_exception_size, .quad kvm_exc_entry_end - kvm_exc_entry)
 SYM_DATA(kvm_enter_guest_size, .quad kvm_enter_guest_end - kvm_enter_guest)
diff --git linux-libre-6.7-gnu/arch/loongarch/kvm/timer.c linux-libre-6.8-gnu/arch/loongarch/kvm/timer.c
index 284bf553fefe..111328f60872 100644
--- linux-libre-6.7-gnu/arch/loongarch/kvm/timer.c
+++ linux-libre-6.8-gnu/arch/loongarch/kvm/timer.c
@@ -64,41 +64,24 @@ void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long timer_hz)
 	kvm_write_sw_gcsr(vcpu->arch.csr, LOONGARCH_CSR_TVAL, 0);
 }
 
-/*
- * Restore hard timer state and enable guest to access timer registers
- * without trap, should be called with irq disabled
- */
-void kvm_acquire_timer(struct kvm_vcpu *vcpu)
-{
-	unsigned long cfg;
-
-	cfg = read_csr_gcfg();
-	if (!(cfg & CSR_GCFG_TIT))
-		return;
-
-	/* Enable guest access to hard timer */
-	write_csr_gcfg(cfg & ~CSR_GCFG_TIT);
-
-	/*
-	 * Freeze the soft-timer and sync the guest stable timer with it. We do
-	 * this with interrupts disabled to avoid latency.
-	 */
-	hrtimer_cancel(&vcpu->arch.swtimer);
-}
-
 /*
  * Restore soft timer state from saved context.
  */
 void kvm_restore_timer(struct kvm_vcpu *vcpu)
 {
-	unsigned long cfg, delta, period;
+	unsigned long cfg, estat;
+	unsigned long ticks, delta, period;
 	ktime_t expire, now;
 	struct loongarch_csrs *csr = vcpu->arch.csr;
 
 	/*
 	 * Set guest stable timer cfg csr
+	 * Disable timer before restore estat CSR register, avoid to
+	 * get invalid timer interrupt for old timer cfg
 	 */
 	cfg = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG);
+
+	write_gcsr_timercfg(0);
 	kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_ESTAT);
 	kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_TCFG);
 	if (!(cfg & CSR_TCFG_EN)) {
@@ -107,24 +90,56 @@ void kvm_restore_timer(struct kvm_vcpu *vcpu)
 		return;
 	}
 
+	/*
+	 * Freeze the soft-timer and sync the guest stable timer with it.
+	 */
+	hrtimer_cancel(&vcpu->arch.swtimer);
+
+	/*
+	 * From LoongArch Reference Manual Volume 1 Chapter 7.6.2
+	 * If oneshot timer is fired, CSR TVAL will be -1, there are two
+	 * conditions:
+	 *  1) timer is fired during exiting to host
+	 *  2) timer is fired and vm is doing timer irq, and then exiting to
+	 *     host. Host should not inject timer irq to avoid spurious
+	 *     timer interrupt again
+	 */
+	ticks = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TVAL);
+	estat = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_ESTAT);
+	if (!(cfg & CSR_TCFG_PERIOD) && (ticks > cfg)) {
+		/*
+		 * Writing 0 to LOONGARCH_CSR_TVAL will inject timer irq
+		 * and set CSR TVAL with -1
+		 */
+		write_gcsr_timertick(0);
+
+		/*
+		 * Writing CSR_TINTCLR_TI to LOONGARCH_CSR_TINTCLR will clear
+		 * timer interrupt, and CSR TVAL keeps unchanged with -1, it
+		 * avoids spurious timer interrupt
+		 */
+		if (!(estat & CPU_TIMER))
+			gcsr_write(CSR_TINTCLR_TI, LOONGARCH_CSR_TINTCLR);
+		return;
+	}
+
 	/*
 	 * Set remainder tick value if not expired
 	 */
+	delta = 0;
 	now = ktime_get();
 	expire = vcpu->arch.expire;
 	if (ktime_before(now, expire))
 		delta = ktime_to_tick(vcpu, ktime_sub(expire, now));
-	else {
-		if (cfg & CSR_TCFG_PERIOD) {
-			period = cfg & CSR_TCFG_VAL;
-			delta = ktime_to_tick(vcpu, ktime_sub(now, expire));
-			delta = period - (delta % period);
-		} else
-			delta = 0;
+	else if (cfg & CSR_TCFG_PERIOD) {
+		period = cfg & CSR_TCFG_VAL;
+		delta = ktime_to_tick(vcpu, ktime_sub(now, expire));
+		delta = period - (delta % period);
+
 		/*
 		 * Inject timer here though sw timer should inject timer
 		 * interrupt async already, since sw timer may be cancelled
-		 * during injecting intr async in function kvm_acquire_timer
+		 * during injecting intr async
 		 */
 		kvm_queue_irq(vcpu, INT_TI);
 	}
@@ -139,27 +154,41 @@ void kvm_restore_timer(struct kvm_vcpu *vcpu)
  */
 static void _kvm_save_timer(struct kvm_vcpu *vcpu)
 {
-	unsigned long ticks, delta;
+	unsigned long ticks, delta, cfg;
 	ktime_t expire;
 	struct loongarch_csrs *csr = vcpu->arch.csr;
 
+	cfg = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG);
 	ticks = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TVAL);
-	delta = tick_to_ns(vcpu, ticks);
-	expire = ktime_add_ns(ktime_get(), delta);
-	vcpu->arch.expire = expire;
-	if (ticks) {
+
+	/*
+	 * From LoongArch Reference Manual Volume 1 Chapter 7.6.2
+	 * If period timer is fired, CSR TVAL will be reloaded from CSR TCFG
+	 * If oneshot timer is fired, CSR TVAL will be -1
+	 * Here judge one-shot timer fired by checking whether TVAL is larger
+	 * than TCFG
+	 */
+	if (ticks < cfg) {
+		delta = tick_to_ns(vcpu, ticks);
+		expire = ktime_add_ns(ktime_get(), delta);
+		vcpu->arch.expire = expire;
+
 		/*
-		 * Update hrtimer to use new timeout
 		 * HRTIMER_MODE_PINNED is suggested since vcpu may run in
 		 * the same physical cpu in next time
 		 */
-		hrtimer_cancel(&vcpu->arch.swtimer);
 		hrtimer_start(&vcpu->arch.swtimer, expire, HRTIMER_MODE_ABS_PINNED);
-	} else
+	} else if (vcpu->stat.generic.blocking) {
 		/*
-		 * Inject timer interrupt so that hall polling can dectect and exit
+		 * Inject timer interrupt so that halt polling can dectect and exit.
+		 * VCPU is scheduled out already and sleeps in rcuwait queue and
+		 * will not poll pending events again. kvm_queue_irq() is not enough,
+		 * hrtimer swtimer should be used here.
 		 */
-		kvm_queue_irq(vcpu, INT_TI);
+		expire = ktime_add_ns(ktime_get(), 10);
+		vcpu->arch.expire = expire;
+		hrtimer_start(&vcpu->arch.swtimer, expire, HRTIMER_MODE_ABS_PINNED);
+	}
 }
 
 /*
@@ -168,21 +197,15 @@ static void _kvm_save_timer(struct kvm_vcpu *vcpu)
  */
 void kvm_save_timer(struct kvm_vcpu *vcpu)
 {
-	unsigned long cfg;
 	struct loongarch_csrs *csr = vcpu->arch.csr;
 
 	preempt_disable();
-	cfg = read_csr_gcfg();
-	if (!(cfg & CSR_GCFG_TIT)) {
-		/* Disable guest use of hard timer */
-		write_csr_gcfg(cfg | CSR_GCFG_TIT);
-
-		/* Save hard timer state */
-		kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TCFG);
-		kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TVAL);
-		if (kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG) & CSR_TCFG_EN)
-			_kvm_save_timer(vcpu);
-	}
+
+	/* Save hard timer state */
+	kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TCFG);
+	kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TVAL);
+	if (kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG) & CSR_TCFG_EN)
+		_kvm_save_timer(vcpu);
 
 	/* Save timer-related state to vCPU context */
 	kvm_save_hw_gcsr(csr, LOONGARCH_CSR_ESTAT);
diff --git linux-libre-6.7-gnu/arch/loongarch/kvm/trace.h linux-libre-6.8-gnu/arch/loongarch/kvm/trace.h
index a1e35d655418..c2484ad4cffa 100644
--- linux-libre-6.7-gnu/arch/loongarch/kvm/trace.h
+++ linux-libre-6.8-gnu/arch/loongarch/kvm/trace.h
@@ -102,6 +102,8 @@ TRACE_EVENT(kvm_exit_gspr,
 #define KVM_TRACE_AUX_DISCARD		4
 
 #define KVM_TRACE_AUX_FPU		1
+#define KVM_TRACE_AUX_LSX		2
+#define KVM_TRACE_AUX_LASX		3
 
 #define kvm_trace_symbol_aux_op				\
 	{ KVM_TRACE_AUX_SAVE,		"save" },	\
@@ -111,7 +113,9 @@ TRACE_EVENT(kvm_exit_gspr,
 	{ KVM_TRACE_AUX_DISCARD,	"discard" }
 
 #define kvm_trace_symbol_aux_state			\
-	{ KVM_TRACE_AUX_FPU,     "FPU" }
+	{ KVM_TRACE_AUX_FPU,     "FPU" },		\
+	{ KVM_TRACE_AUX_LSX,     "LSX" },		\
+	{ KVM_TRACE_AUX_LASX,    "LASX" }
 
 TRACE_EVENT(kvm_aux,
 	    TP_PROTO(struct kvm_vcpu *vcpu, unsigned int op,
diff --git linux-libre-6.7-gnu/arch/loongarch/kvm/vcpu.c linux-libre-6.8-gnu/arch/loongarch/kvm/vcpu.c
index 73d0c2b9c1a5..36106922b5d7 100644
--- linux-libre-6.7-gnu/arch/loongarch/kvm/vcpu.c
+++ linux-libre-6.8-gnu/arch/loongarch/kvm/vcpu.c
@@ -95,7 +95,6 @@ static int kvm_pre_enter_guest(struct kvm_vcpu *vcpu)
 		 * check vmid before vcpu enter guest
 		 */
 		local_irq_disable();
-		kvm_acquire_timer(vcpu);
 		kvm_deliver_intr(vcpu);
 		kvm_deliver_exception(vcpu);
 		/* Make sure the vcpu mode has been written */
@@ -187,8 +186,15 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 {
-	return kvm_pending_timer(vcpu) ||
+	int ret;
+
+	/* Protect from TOD sync and vcpu_load/put() */
+	preempt_disable();
+	ret = kvm_pending_timer(vcpu) ||
 		kvm_read_hw_gcsr(LOONGARCH_CSR_ESTAT) & (1 << INT_TI);
+	preempt_enable();
+
+	return ret;
 }
 
 int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu)
@@ -244,23 +250,6 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 	return -EINVAL;
 }
 
-/**
- * kvm_migrate_count() - Migrate timer.
- * @vcpu:       Virtual CPU.
- *
- * Migrate hrtimer to the current CPU by cancelling and restarting it
- * if the hrtimer is active.
- *
- * Must be called when the vCPU is migrated to a different CPU, so that
- * the timer can interrupt the guest at the new CPU, and the timer irq can
- * be delivered to the vCPU.
- */
-static void kvm_migrate_count(struct kvm_vcpu *vcpu)
-{
-	if (hrtimer_cancel(&vcpu->arch.swtimer))
-		hrtimer_restart(&vcpu->arch.swtimer);
-}
-
 static int _kvm_getcsr(struct kvm_vcpu *vcpu, unsigned int id, u64 *val)
 {
 	unsigned long gintc;
@@ -309,6 +298,75 @@ static int _kvm_setcsr(struct kvm_vcpu *vcpu, unsigned int id, u64 val)
 	return ret;
 }
 
+static int _kvm_get_cpucfg_mask(int id, u64 *v)
+{
+	if (id < 0 || id >= KVM_MAX_CPUCFG_REGS)
+		return -EINVAL;
+
+	switch (id) {
+	case 2:
+		/* CPUCFG2 features unconditionally supported by KVM */
+		*v = CPUCFG2_FP     | CPUCFG2_FPSP  | CPUCFG2_FPDP     |
+		     CPUCFG2_FPVERS | CPUCFG2_LLFTP | CPUCFG2_LLFTPREV |
+		     CPUCFG2_LAM;
+		/*
+		 * For the ISA extensions listed below, if one is supported
+		 * by the host, then it is also supported by KVM.
+		 */
+		if (cpu_has_lsx)
+			*v |= CPUCFG2_LSX;
+		if (cpu_has_lasx)
+			*v |= CPUCFG2_LASX;
+
+		return 0;
+	default:
+		/*
+		 * No restrictions on other valid CPUCFG IDs' values, but
+		 * CPUCFG data is limited to 32 bits as the LoongArch ISA
+		 * manual says (Volume 1, Section 2.2.10.5 "CPUCFG").
+		 */
+		*v = U32_MAX;
+		return 0;
+	}
+}
+
+static int kvm_check_cpucfg(int id, u64 val)
+{
+	int ret;
+	u64 mask = 0;
+
+	ret = _kvm_get_cpucfg_mask(id, &mask);
+	if (ret)
+		return ret;
+
+	if (val & ~mask)
+		/* Unsupported features and/or the higher 32 bits should not be set */
+		return -EINVAL;
+
+	switch (id) {
+	case 2:
+		if (!(val & CPUCFG2_LLFTP))
+			/* Guests must have a constant timer */
+			return -EINVAL;
+		if ((val & CPUCFG2_FP) && (!(val & CPUCFG2_FPSP) || !(val & CPUCFG2_FPDP)))
+			/* Single and double float point must both be set when FP is enabled */
+			return -EINVAL;
+		if ((val & CPUCFG2_LSX) && !(val & CPUCFG2_FP))
+			/* LSX architecturally implies FP but val does not satisfy that */
+			return -EINVAL;
+		if ((val & CPUCFG2_LASX) && !(val & CPUCFG2_LSX))
+			/* LASX architecturally implies LSX and FP but val does not satisfy that */
+			return -EINVAL;
+		return 0;
+	default:
+		/*
+		 * Values for the other CPUCFG IDs are not being further validated
+		 * besides the mask check above.
+		 */
+		return 0;
+	}
+}
+
 static int kvm_get_one_reg(struct kvm_vcpu *vcpu,
 		const struct kvm_one_reg *reg, u64 *v)
 {
@@ -378,10 +436,10 @@ static int kvm_set_one_reg(struct kvm_vcpu *vcpu,
 		break;
 	case KVM_REG_LOONGARCH_CPUCFG:
 		id = KVM_GET_IOC_CPUCFG_IDX(reg->id);
-		if (id >= 0 && id < KVM_MAX_CPUCFG_REGS)
-			vcpu->arch.cpucfg[id] = (u32)v;
-		else
-			ret = -EINVAL;
+		ret = kvm_check_cpucfg(id, v);
+		if (ret)
+			break;
+		vcpu->arch.cpucfg[id] = (u32)v;
 		break;
 	case KVM_REG_LOONGARCH_KVM:
 		switch (reg->id) {
@@ -471,10 +529,94 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 	return -EINVAL;
 }
 
+static int kvm_loongarch_cpucfg_has_attr(struct kvm_vcpu *vcpu,
+					 struct kvm_device_attr *attr)
+{
+	switch (attr->attr) {
+	case 2:
+		return 0;
+	default:
+		return -ENXIO;
+	}
+
+	return -ENXIO;
+}
+
+static int kvm_loongarch_vcpu_has_attr(struct kvm_vcpu *vcpu,
+				       struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	case KVM_LOONGARCH_VCPU_CPUCFG:
+		ret = kvm_loongarch_cpucfg_has_attr(vcpu, attr);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int kvm_loongarch_get_cpucfg_attr(struct kvm_vcpu *vcpu,
+					 struct kvm_device_attr *attr)
+{
+	int ret = 0;
+	uint64_t val;
+	uint64_t __user *uaddr = (uint64_t __user *)attr->addr;
+
+	ret = _kvm_get_cpucfg_mask(attr->attr, &val);
+	if (ret)
+		return ret;
+
+	put_user(val, uaddr);
+
+	return ret;
+}
+
+static int kvm_loongarch_vcpu_get_attr(struct kvm_vcpu *vcpu,
+				       struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	case KVM_LOONGARCH_VCPU_CPUCFG:
+		ret = kvm_loongarch_get_cpucfg_attr(vcpu, attr);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int kvm_loongarch_cpucfg_set_attr(struct kvm_vcpu *vcpu,
+					 struct kvm_device_attr *attr)
+{
+	return -ENXIO;
+}
+
+static int kvm_loongarch_vcpu_set_attr(struct kvm_vcpu *vcpu,
+				       struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	case KVM_LOONGARCH_VCPU_CPUCFG:
+		ret = kvm_loongarch_cpucfg_set_attr(vcpu, attr);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
 long kvm_arch_vcpu_ioctl(struct file *filp,
 			 unsigned int ioctl, unsigned long arg)
 {
 	long r;
+	struct kvm_device_attr attr;
 	void __user *argp = (void __user *)arg;
 	struct kvm_vcpu *vcpu = filp->private_data;
 
@@ -514,6 +656,27 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap);
 		break;
 	}
+	case KVM_HAS_DEVICE_ATTR: {
+		r = -EFAULT;
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			break;
+		r = kvm_loongarch_vcpu_has_attr(vcpu, &attr);
+		break;
+	}
+	case KVM_GET_DEVICE_ATTR: {
+		r = -EFAULT;
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			break;
+		r = kvm_loongarch_vcpu_get_attr(vcpu, &attr);
+		break;
+	}
+	case KVM_SET_DEVICE_ATTR: {
+		r = -EFAULT;
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			break;
+		r = kvm_loongarch_vcpu_set_attr(vcpu, &attr);
+		break;
+	}
 	default:
 		r = -ENOIOCTLCMD;
 		break;
@@ -561,12 +724,96 @@ void kvm_own_fpu(struct kvm_vcpu *vcpu)
 	preempt_enable();
 }
 
+#ifdef CONFIG_CPU_HAS_LSX
+/* Enable LSX and restore context */
+int kvm_own_lsx(struct kvm_vcpu *vcpu)
+{
+	if (!kvm_guest_has_fpu(&vcpu->arch) || !kvm_guest_has_lsx(&vcpu->arch))
+		return -EINVAL;
+
+	preempt_disable();
+
+	/* Enable LSX for guest */
+	set_csr_euen(CSR_EUEN_LSXEN | CSR_EUEN_FPEN);
+	switch (vcpu->arch.aux_inuse & KVM_LARCH_FPU) {
+	case KVM_LARCH_FPU:
+		/*
+		 * Guest FPU state already loaded,
+		 * only restore upper LSX state
+		 */
+		_restore_lsx_upper(&vcpu->arch.fpu);
+		break;
+	default:
+		/* Neither FP or LSX already active,
+		 * restore full LSX state
+		 */
+		kvm_restore_lsx(&vcpu->arch.fpu);
+		break;
+	}
+
+	trace_kvm_aux(vcpu, KVM_TRACE_AUX_RESTORE, KVM_TRACE_AUX_LSX);
+	vcpu->arch.aux_inuse |= KVM_LARCH_LSX | KVM_LARCH_FPU;
+	preempt_enable();
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_CPU_HAS_LASX
+/* Enable LASX and restore context */
+int kvm_own_lasx(struct kvm_vcpu *vcpu)
+{
+	if (!kvm_guest_has_fpu(&vcpu->arch) || !kvm_guest_has_lsx(&vcpu->arch) || !kvm_guest_has_lasx(&vcpu->arch))
+		return -EINVAL;
+
+	preempt_disable();
+
+	set_csr_euen(CSR_EUEN_FPEN | CSR_EUEN_LSXEN | CSR_EUEN_LASXEN);
+	switch (vcpu->arch.aux_inuse & (KVM_LARCH_FPU | KVM_LARCH_LSX)) {
+	case KVM_LARCH_LSX:
+	case KVM_LARCH_LSX | KVM_LARCH_FPU:
+		/* Guest LSX state already loaded, only restore upper LASX state */
+		_restore_lasx_upper(&vcpu->arch.fpu);
+		break;
+	case KVM_LARCH_FPU:
+		/* Guest FP state already loaded, only restore upper LSX & LASX state */
+		_restore_lsx_upper(&vcpu->arch.fpu);
+		_restore_lasx_upper(&vcpu->arch.fpu);
+		break;
+	default:
+		/* Neither FP or LSX already active, restore full LASX state */
+		kvm_restore_lasx(&vcpu->arch.fpu);
+		break;
+	}
+
+	trace_kvm_aux(vcpu, KVM_TRACE_AUX_RESTORE, KVM_TRACE_AUX_LASX);
+	vcpu->arch.aux_inuse |= KVM_LARCH_LASX | KVM_LARCH_LSX | KVM_LARCH_FPU;
+	preempt_enable();
+
+	return 0;
+}
+#endif
+
 /* Save context and disable FPU */
 void kvm_lose_fpu(struct kvm_vcpu *vcpu)
 {
 	preempt_disable();
 
-	if (vcpu->arch.aux_inuse & KVM_LARCH_FPU) {
+	if (vcpu->arch.aux_inuse & KVM_LARCH_LASX) {
+		kvm_save_lasx(&vcpu->arch.fpu);
+		vcpu->arch.aux_inuse &= ~(KVM_LARCH_LSX | KVM_LARCH_FPU | KVM_LARCH_LASX);
+		trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_LASX);
+
+		/* Disable LASX & LSX & FPU */
+		clear_csr_euen(CSR_EUEN_FPEN | CSR_EUEN_LSXEN | CSR_EUEN_LASXEN);
+	} else if (vcpu->arch.aux_inuse & KVM_LARCH_LSX) {
+		kvm_save_lsx(&vcpu->arch.fpu);
+		vcpu->arch.aux_inuse &= ~(KVM_LARCH_LSX | KVM_LARCH_FPU);
+		trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_LSX);
+
+		/* Disable LSX & FPU */
+		clear_csr_euen(CSR_EUEN_FPEN | CSR_EUEN_LSXEN);
+	} else if (vcpu->arch.aux_inuse & KVM_LARCH_FPU) {
 		kvm_save_fpu(&vcpu->arch.fpu);
 		vcpu->arch.aux_inuse &= ~KVM_LARCH_FPU;
 		trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_FPU);
@@ -789,17 +1036,6 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	if (vcpu->arch.last_sched_cpu != cpu) {
-		kvm_debug("[%d->%d]KVM vCPU[%d] switch\n",
-				vcpu->arch.last_sched_cpu, cpu, vcpu->vcpu_id);
-		/*
-		 * Migrate the timer interrupt to the current CPU so that it
-		 * always interrupts the guest and synchronously triggers a
-		 * guest timer interrupt.
-		 */
-		kvm_migrate_count(vcpu);
-	}
-
 	/* Restore guest state to registers */
 	_kvm_vcpu_load(vcpu, cpu);
 	local_irq_restore(flags);
diff --git linux-libre-6.7-gnu/arch/loongarch/mm/kasan_init.c linux-libre-6.8-gnu/arch/loongarch/mm/kasan_init.c
index cc3e81fe0186..c608adc99845 100644
--- linux-libre-6.7-gnu/arch/loongarch/mm/kasan_init.c
+++ linux-libre-6.8-gnu/arch/loongarch/mm/kasan_init.c
@@ -44,6 +44,9 @@ void *kasan_mem_to_shadow(const void *addr)
 		unsigned long xrange = (maddr >> XRANGE_SHIFT) & 0xffff;
 		unsigned long offset = 0;
 
+		if (maddr >= FIXADDR_START)
+			return (void *)(kasan_early_shadow_page);
+
 		maddr &= XRANGE_SHADOW_MASK;
 		switch (xrange) {
 		case XKPRANGE_CC_SEG:
diff --git linux-libre-6.7-gnu/arch/loongarch/mm/tlb.c linux-libre-6.8-gnu/arch/loongarch/mm/tlb.c
index 2c0a411f23aa..0b95d32b30c9 100644
--- linux-libre-6.7-gnu/arch/loongarch/mm/tlb.c
+++ linux-libre-6.8-gnu/arch/loongarch/mm/tlb.c
@@ -284,12 +284,16 @@ static void setup_tlb_handler(int cpu)
 		set_handler(EXCCODE_TLBNR * VECSIZE, handle_tlb_protect, VECSIZE);
 		set_handler(EXCCODE_TLBNX * VECSIZE, handle_tlb_protect, VECSIZE);
 		set_handler(EXCCODE_TLBPE * VECSIZE, handle_tlb_protect, VECSIZE);
-	}
+	} else {
+		int vec_sz __maybe_unused;
+		void *addr __maybe_unused;
+		struct page *page __maybe_unused;
+
+		/* Avoid lockdep warning */
+		rcutree_report_cpu_starting(cpu);
+
 #ifdef CONFIG_NUMA
-	else {
-		void *addr;
-		struct page *page;
-		const int vec_sz = sizeof(exception_handlers);
+		vec_sz = sizeof(exception_handlers);
 
 		if (pcpu_handlers[cpu])
 			return;
@@ -305,8 +309,8 @@ static void setup_tlb_handler(int cpu)
 		csr_write64(pcpu_handlers[cpu], LOONGARCH_CSR_EENTRY);
 		csr_write64(pcpu_handlers[cpu], LOONGARCH_CSR_MERRENTRY);
 		csr_write64(pcpu_handlers[cpu] + 80*VECSIZE, LOONGARCH_CSR_TLBRENTRY);
-	}
 #endif
+	}
 }
 
 void tlb_init(int cpu)
diff --git linux-libre-6.7-gnu/arch/loongarch/net/bpf_jit.c linux-libre-6.8-gnu/arch/loongarch/net/bpf_jit.c
index 4fcd6cd6da23..e73323d759d0 100644
--- linux-libre-6.7-gnu/arch/loongarch/net/bpf_jit.c
+++ linux-libre-6.8-gnu/arch/loongarch/net/bpf_jit.c
@@ -201,6 +201,11 @@ bool bpf_jit_supports_kfunc_call(void)
 	return true;
 }
 
+bool bpf_jit_supports_far_kfunc_call(void)
+{
+	return true;
+}
+
 /* initialized on the first pass of build_body() */
 static int out_offset = -1;
 static int emit_bpf_tail_call(struct jit_ctx *ctx)
@@ -465,7 +470,6 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 	const u8 dst = regmap[insn->dst_reg];
 	const s16 off = insn->off;
 	const s32 imm = insn->imm;
-	const u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm;
 	const bool is32 = BPF_CLASS(insn->code) == BPF_ALU || BPF_CLASS(insn->code) == BPF_JMP32;
 
 	switch (code) {
@@ -923,8 +927,12 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 
 	/* dst = imm64 */
 	case BPF_LD | BPF_IMM | BPF_DW:
+	{
+		const u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm;
+
 		move_imm(ctx, dst, imm64, is32);
 		return 1;
+	}
 
 	/* dst = *(size *)(src + off) */
 	case BPF_LDX | BPF_MEM | BPF_B:
diff --git linux-libre-6.7-gnu/arch/loongarch/vdso/Makefile linux-libre-6.8-gnu/arch/loongarch/vdso/Makefile
index c74c9921304f..f597cd08a96b 100644
--- linux-libre-6.7-gnu/arch/loongarch/vdso/Makefile
+++ linux-libre-6.8-gnu/arch/loongarch/vdso/Makefile
@@ -2,6 +2,7 @@
 # Objects to go into the VDSO.
 
 KASAN_SANITIZE := n
+UBSAN_SANITIZE := n
 KCOV_INSTRUMENT := n
 
 # Include the generic Makefile to check the built vdso.
diff --git linux-libre-6.7-gnu/arch/loongarch/vdso/vgettimeofday.c linux-libre-6.8-gnu/arch/loongarch/vdso/vgettimeofday.c
index 8f22863bd7ea..0885c1f3a89d 100644
--- linux-libre-6.7-gnu/arch/loongarch/vdso/vgettimeofday.c
+++ linux-libre-6.8-gnu/arch/loongarch/vdso/vgettimeofday.c
@@ -5,23 +5,18 @@
  * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
  */
 #include <linux/types.h>
+#include <vdso/gettime.h>
 
-extern
-int __vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts);
 int __vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts)
 {
 	return __cvdso_clock_gettime(clock, ts);
 }
 
-extern
-int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz);
 int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz)
 {
 	return __cvdso_gettimeofday(tv, tz);
 }
 
-extern
-int __vdso_clock_getres(clockid_t clock_id, struct __kernel_timespec *res);
 int __vdso_clock_getres(clockid_t clock_id, struct __kernel_timespec *res)
 {
 	return __cvdso_clock_getres(clock_id, res);
diff --git linux-libre-6.7-gnu/arch/m68k/Kconfig.cpu linux-libre-6.8-gnu/arch/m68k/Kconfig.cpu
index ad69b466a08b..9dcf245c9cbf 100644
--- linux-libre-6.7-gnu/arch/m68k/Kconfig.cpu
+++ linux-libre-6.8-gnu/arch/m68k/Kconfig.cpu
@@ -402,7 +402,7 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
diff --git linux-libre-6.7-gnu/arch/m68k/Makefile linux-libre-6.8-gnu/arch/m68k/Makefile
index 43e39040d3ac..0abcf994ce55 100644
--- linux-libre-6.7-gnu/arch/m68k/Makefile
+++ linux-libre-6.8-gnu/arch/m68k/Makefile
@@ -15,10 +15,10 @@
 KBUILD_DEFCONFIG := multi_defconfig
 
 ifdef cross_compiling
-	ifeq ($(CROSS_COMPILE),)
+    ifeq ($(CROSS_COMPILE),)
 		CROSS_COMPILE := $(call cc-cross-prefix, \
 			m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
-	endif
+    endif
 endif
 
 #
diff --git linux-libre-6.7-gnu/arch/m68k/coldfire/vectors.c linux-libre-6.8-gnu/arch/m68k/coldfire/vectors.c
index c26c255b530d..4321fd89d83e 100644
--- linux-libre-6.7-gnu/arch/m68k/coldfire/vectors.c
+++ linux-libre-6.8-gnu/arch/m68k/coldfire/vectors.c
@@ -12,14 +12,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/cpu.h>
 #include <asm/traps.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfwdebug.h>
 
-#include "vectors.h"
-
 /***************************************************************************/
 
 #ifdef TRAP_DBG_INTERRUPT
diff --git linux-libre-6.7-gnu/arch/m68k/coldfire/vectors.h linux-libre-6.8-gnu/arch/m68k/coldfire/vectors.h
deleted file mode 100644
index 0b01450a4353..000000000000
--- linux-libre-6.7-gnu/arch/m68k/coldfire/vectors.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-void trap_init(void);
diff --git linux-libre-6.7-gnu/arch/m68k/configs/amiga_defconfig linux-libre-6.8-gnu/arch/m68k/configs/amiga_defconfig
index 7e6b74b6eecd..b4d71fea558f 100644
--- linux-libre-6.7-gnu/arch/m68k/configs/amiga_defconfig
+++ linux-libre-6.8-gnu/arch/m68k/configs/amiga_defconfig
@@ -453,6 +453,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -550,7 +551,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git linux-libre-6.7-gnu/arch/m68k/configs/apollo_defconfig linux-libre-6.8-gnu/arch/m68k/configs/apollo_defconfig
index 0b403e2efcd5..682d8cd3dd3c 100644
--- linux-libre-6.7-gnu/arch/m68k/configs/apollo_defconfig
+++ linux-libre-6.8-gnu/arch/m68k/configs/apollo_defconfig
@@ -410,6 +410,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -507,7 +508,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git linux-libre-6.7-gnu/arch/m68k/configs/atari_defconfig linux-libre-6.8-gnu/arch/m68k/configs/atari_defconfig
index 57aac3f4b001..15259ced8463 100644
--- linux-libre-6.7-gnu/arch/m68k/configs/atari_defconfig
+++ linux-libre-6.8-gnu/arch/m68k/configs/atari_defconfig
@@ -430,6 +430,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -527,7 +528,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git linux-libre-6.7-gnu/arch/m68k/configs/bvme6000_defconfig linux-libre-6.8-gnu/arch/m68k/configs/bvme6000_defconfig
index 3c160636a2e9..7395c12caef6 100644
--- linux-libre-6.7-gnu/arch/m68k/configs/bvme6000_defconfig
+++ linux-libre-6.8-gnu/arch/m68k/configs/bvme6000_defconfig
@@ -402,6 +402,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -499,7 +500,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git linux-libre-6.7-gnu/arch/m68k/configs/hp300_defconfig linux-libre-6.8-gnu/arch/m68k/configs/hp300_defconfig
index 23cf07c49d14..92506bc7f78d 100644
--- linux-libre-6.7-gnu/arch/m68k/configs/hp300_defconfig
+++ linux-libre-6.8-gnu/arch/m68k/configs/hp300_defconfig
@@ -412,6 +412,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -509,7 +510,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git linux-libre-6.7-gnu/arch/m68k/configs/mac_defconfig linux-libre-6.8-gnu/arch/m68k/configs/mac_defconfig
index 619a0d93ce5b..144bc8c0d8b5 100644
--- linux-libre-6.7-gnu/arch/m68k/configs/mac_defconfig
+++ linux-libre-6.8-gnu/arch/m68k/configs/mac_defconfig
@@ -269,9 +269,6 @@ CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
 CONFIG_6LOWPAN=m
 CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
 CONFIG_6LOWPAN_GHC_UDP=m
@@ -432,6 +429,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -529,7 +527,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git linux-libre-6.7-gnu/arch/m68k/configs/multi_defconfig linux-libre-6.8-gnu/arch/m68k/configs/multi_defconfig
index d9430bc2b2de..07594c729497 100644
--- linux-libre-6.7-gnu/arch/m68k/configs/multi_defconfig
+++ linux-libre-6.8-gnu/arch/m68k/configs/multi_defconfig
@@ -289,9 +289,6 @@ CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
 CONFIG_6LOWPAN=m
 CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
 CONFIG_6LOWPAN_GHC_UDP=m
@@ -518,6 +515,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -615,7 +613,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git linux-libre-6.7-gnu/arch/m68k/configs/mvme147_defconfig linux-libre-6.8-gnu/arch/m68k/configs/mvme147_defconfig
index eb6132f29bf5..c34de6c1de20 100644
--- linux-libre-6.7-gnu/arch/m68k/configs/mvme147_defconfig
+++ linux-libre-6.8-gnu/arch/m68k/configs/mvme147_defconfig
@@ -401,6 +401,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -498,7 +499,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git linux-libre-6.7-gnu/arch/m68k/configs/mvme16x_defconfig linux-libre-6.8-gnu/arch/m68k/configs/mvme16x_defconfig
index d0bad674cbb7..83bc029d1f33 100644
--- linux-libre-6.7-gnu/arch/m68k/configs/mvme16x_defconfig
+++ linux-libre-6.8-gnu/arch/m68k/configs/mvme16x_defconfig
@@ -402,6 +402,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -499,7 +500,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git linux-libre-6.7-gnu/arch/m68k/configs/q40_defconfig linux-libre-6.8-gnu/arch/m68k/configs/q40_defconfig
index dad6bcfcaeed..4f551dac2ed7 100644
--- linux-libre-6.7-gnu/arch/m68k/configs/q40_defconfig
+++ linux-libre-6.8-gnu/arch/m68k/configs/q40_defconfig
@@ -419,6 +419,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -516,7 +517,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git linux-libre-6.7-gnu/arch/m68k/configs/sun3_defconfig linux-libre-6.8-gnu/arch/m68k/configs/sun3_defconfig
index eb1b489b3139..b1bf01182bd3 100644
--- linux-libre-6.7-gnu/arch/m68k/configs/sun3_defconfig
+++ linux-libre-6.8-gnu/arch/m68k/configs/sun3_defconfig
@@ -400,6 +400,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -497,7 +498,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git linux-libre-6.7-gnu/arch/m68k/configs/sun3x_defconfig linux-libre-6.8-gnu/arch/m68k/configs/sun3x_defconfig
index 939589826546..5c9a3f71f036 100644
--- linux-libre-6.7-gnu/arch/m68k/configs/sun3x_defconfig
+++ linux-libre-6.8-gnu/arch/m68k/configs/sun3x_defconfig
@@ -400,6 +400,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_JFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -497,7 +498,6 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
diff --git linux-libre-6.7-gnu/arch/m68k/emu/nfcon.c linux-libre-6.8-gnu/arch/m68k/emu/nfcon.c
index 3a74d493eb3e..17b2987c2bf5 100644
--- linux-libre-6.7-gnu/arch/m68k/emu/nfcon.c
+++ linux-libre-6.8-gnu/arch/m68k/emu/nfcon.c
@@ -23,9 +23,9 @@ static int stderr_id;
 static struct tty_port nfcon_tty_port;
 static struct tty_driver *nfcon_tty_driver;
 
-static void nfputs(const char *str, unsigned int count)
+static void nfputs(const u8 *str, size_t count)
 {
-	char buf[68];
+	u8 buf[68];
 	unsigned long phys = virt_to_phys(buf);
 
 	buf[64] = 0;
diff --git linux-libre-6.7-gnu/arch/m68k/include/asm/cacheflush_mm.h linux-libre-6.8-gnu/arch/m68k/include/asm/cacheflush_mm.h
index ed12358c4783..9a71b0148461 100644
--- linux-libre-6.7-gnu/arch/m68k/include/asm/cacheflush_mm.h
+++ linux-libre-6.8-gnu/arch/m68k/include/asm/cacheflush_mm.h
@@ -191,6 +191,7 @@ extern void cache_push_v(unsigned long vaddr, int len);
 #define flush_cache_all() __flush_cache_all()
 
 #define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
 static inline void flush_cache_mm(struct mm_struct *mm)
diff --git linux-libre-6.7-gnu/arch/m68k/include/asm/io_mm.h linux-libre-6.8-gnu/arch/m68k/include/asm/io_mm.h
index 47525f2a57e1..090aec54b8fa 100644
--- linux-libre-6.7-gnu/arch/m68k/include/asm/io_mm.h
+++ linux-libre-6.8-gnu/arch/m68k/include/asm/io_mm.h
@@ -389,12 +389,6 @@ static inline void isa_delay(void)
 
 #define __ARCH_HAS_NO_PAGE_ZERO_MAPPED		1
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
 #define readb_relaxed(addr)	readb(addr)
 #define readw_relaxed(addr)	readw(addr)
 #define readl_relaxed(addr)	readl(addr)
diff --git linux-libre-6.7-gnu/arch/m68k/include/asm/kmap.h linux-libre-6.8-gnu/arch/m68k/include/asm/kmap.h
index 4efb3efa593a..b778f015c917 100644
--- linux-libre-6.7-gnu/arch/m68k/include/asm/kmap.h
+++ linux-libre-6.8-gnu/arch/m68k/include/asm/kmap.h
@@ -25,7 +25,6 @@ static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
 	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
 }
 
-#define ioremap_uc ioremap
 #define ioremap_wt ioremap_wt
 static inline void __iomem *ioremap_wt(unsigned long physaddr,
 				       unsigned long size)
diff --git linux-libre-6.7-gnu/arch/m68k/include/asm/processor.h linux-libre-6.8-gnu/arch/m68k/include/asm/processor.h
index 7a2da780830b..8f2676c3a988 100644
--- linux-libre-6.7-gnu/arch/m68k/include/asm/processor.h
+++ linux-libre-6.8-gnu/arch/m68k/include/asm/processor.h
@@ -8,6 +8,7 @@
 #ifndef __ASM_M68K_PROCESSOR_H
 #define __ASM_M68K_PROCESSOR_H
 
+#include <linux/preempt.h>
 #include <linux/thread_info.h>
 #include <asm/fpu.h>
 #include <asm/ptrace.h>
diff --git linux-libre-6.7-gnu/arch/m68k/kernel/syscalls/syscall.tbl linux-libre-6.8-gnu/arch/m68k/kernel/syscalls/syscall.tbl
index 7a4b780e82cb..7fd43fd4c9f2 100644
--- linux-libre-6.7-gnu/arch/m68k/kernel/syscalls/syscall.tbl
+++ linux-libre-6.8-gnu/arch/m68k/kernel/syscalls/syscall.tbl
@@ -456,3 +456,8 @@
 454	common	futex_wake			sys_futex_wake
 455	common	futex_wait			sys_futex_wait
 456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
diff --git linux-libre-6.7-gnu/arch/microblaze/configs/mmu_defconfig linux-libre-6.8-gnu/arch/microblaze/configs/mmu_defconfig
index 7b2d7f6f23c0..4da7bc4ac4a3 100644
--- linux-libre-6.7-gnu/arch/microblaze/configs/mmu_defconfig
+++ linux-libre-6.8-gnu/arch/microblaze/configs/mmu_defconfig
@@ -3,11 +3,9 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_EXPERT=y
 # CONFIG_BASE_FULL is not set
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EXPERT=y
 CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
 CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
 CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
@@ -20,7 +18,6 @@ CONFIG_CMDLINE_FORCE=y
 CONFIG_HIGHMEM=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_CMA=y
@@ -28,6 +25,10 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_IPV6 is not set
 CONFIG_BRIDGE=m
 CONFIG_PCI=y
@@ -43,6 +44,7 @@ CONFIG_NETDEVICES=y
 CONFIG_XILINX_EMACLITE=y
 CONFIG_XILINX_AXI_EMAC=y
 CONFIG_XILINX_LL_TEMAC=y
+CONFIG_MARVELL_PHY=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
@@ -77,14 +79,13 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 CONFIG_CIFS=y
-CONFIG_CIFS_STATS2=y
 CONFIG_ENCRYPTED_KEYS=y
 CONFIG_DMA_CMA=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_KGDB=y
 CONFIG_KGDB_TESTS=y
 CONFIG_KGDB_KDB=y
-CONFIG_DEBUG_SLAB=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_SPINLOCK=y
diff --git linux-libre-6.7-gnu/arch/microblaze/include/asm/ftrace.h linux-libre-6.8-gnu/arch/microblaze/include/asm/ftrace.h
index 6a92bed37794..4ca38b92a3a2 100644
--- linux-libre-6.7-gnu/arch/microblaze/include/asm/ftrace.h
+++ linux-libre-6.8-gnu/arch/microblaze/include/asm/ftrace.h
@@ -10,6 +10,7 @@
 #ifndef __ASSEMBLY__
 extern void _mcount(void);
 extern void ftrace_call_graph(void);
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr);
 #endif
 
 #ifdef CONFIG_DYNAMIC_FTRACE
diff --git linux-libre-6.7-gnu/arch/microblaze/include/asm/pgtable.h linux-libre-6.8-gnu/arch/microblaze/include/asm/pgtable.h
index 3042eb98bb56..e4ea2ec3642f 100644
--- linux-libre-6.7-gnu/arch/microblaze/include/asm/pgtable.h
+++ linux-libre-6.8-gnu/arch/microblaze/include/asm/pgtable.h
@@ -336,6 +336,7 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
 }
 
 #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+struct vm_area_struct;
 static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
 		unsigned long address, pte_t *ptep)
 {
diff --git linux-libre-6.7-gnu/arch/microblaze/kernel/syscalls/syscall.tbl linux-libre-6.8-gnu/arch/microblaze/kernel/syscalls/syscall.tbl
index 5b6a0b02b7de..b00ab2cabab9 100644
--- linux-libre-6.7-gnu/arch/microblaze/kernel/syscalls/syscall.tbl
+++ linux-libre-6.8-gnu/arch/microblaze/kernel/syscalls/syscall.tbl
@@ -462,3 +462,8 @@
 454	common	futex_wake			sys_futex_wake
 455	common	futex_wait			sys_futex_wait
 456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
diff --git linux-libre-6.7-gnu/arch/microblaze/kernel/traps.c linux-libre-6.8-gnu/arch/microblaze/kernel/traps.c
index 94b6fe93147d..080aa769218d 100644
--- linux-libre-6.7-gnu/arch/microblaze/kernel/traps.c
+++ linux-libre-6.8-gnu/arch/microblaze/kernel/traps.c
@@ -8,6 +8,7 @@
  * for more details.
  */
 
+#include <linux/cpu.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/kallsyms.h>
diff --git linux-libre-6.7-gnu/arch/mips/Kbuild linux-libre-6.8-gnu/arch/mips/Kbuild
index af2967bffb73..e2d623621a00 100644
--- linux-libre-6.7-gnu/arch/mips/Kbuild
+++ linux-libre-6.8-gnu/arch/mips/Kbuild
@@ -1,10 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-# Fail on warnings - also for files referenced in subdirs
-# -Werror can be disabled for specific files using:
-# CFLAGS_<file.o> := -Wno-error
-ifeq ($(W),)
-subdir-ccflags-y := -Werror
-endif
 
 # platform specific definitions
 include $(srctree)/arch/mips/Kbuild.platforms
diff --git linux-libre-6.7-gnu/arch/mips/alchemy/common/prom.c linux-libre-6.8-gnu/arch/mips/alchemy/common/prom.c
index b13d8adf3be4..20d30f6265cd 100644
--- linux-libre-6.7-gnu/arch/mips/alchemy/common/prom.c
+++ linux-libre-6.8-gnu/arch/mips/alchemy/common/prom.c
@@ -40,6 +40,7 @@
 #include <linux/string.h>
 
 #include <asm/bootinfo.h>
+#include <prom.h>
 
 int prom_argc;
 char **prom_argv;
diff --git linux-libre-6.7-gnu/arch/mips/alchemy/common/setup.c linux-libre-6.8-gnu/arch/mips/alchemy/common/setup.c
index 2388d68786f4..a7a6d31a7a41 100644
--- linux-libre-6.7-gnu/arch/mips/alchemy/common/setup.c
+++ linux-libre-6.8-gnu/arch/mips/alchemy/common/setup.c
@@ -30,13 +30,11 @@
 #include <linux/mm.h>
 #include <linux/dma-map-ops.h> /* for dma_default_coherent */
 
+#include <asm/bootinfo.h>
 #include <asm/mipsregs.h>
 
 #include <au1000.h>
 
-extern void __init board_setup(void);
-extern void __init alchemy_set_lpj(void);
-
 static bool alchemy_dma_coherent(void)
 {
 	switch (alchemy_get_cputype()) {
diff --git linux-libre-6.7-gnu/arch/mips/alchemy/devboards/db1200.c linux-libre-6.8-gnu/arch/mips/alchemy/devboards/db1200.c
index f521874ebb07..67f067706af2 100644
--- linux-libre-6.7-gnu/arch/mips/alchemy/devboards/db1200.c
+++ linux-libre-6.8-gnu/arch/mips/alchemy/devboards/db1200.c
@@ -847,7 +847,7 @@ int __init db1200_dev_setup(void)
 	i2c_register_board_info(0, db1200_i2c_devs,
 				ARRAY_SIZE(db1200_i2c_devs));
 	spi_register_board_info(db1200_spi_devs,
-				ARRAY_SIZE(db1200_i2c_devs));
+				ARRAY_SIZE(db1200_spi_devs));
 
 	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C	 ON=SPI)
 	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
diff --git linux-libre-6.7-gnu/arch/mips/alchemy/devboards/db1550.c linux-libre-6.8-gnu/arch/mips/alchemy/devboards/db1550.c
index fd91d9c9a252..6c6837181f55 100644
--- linux-libre-6.7-gnu/arch/mips/alchemy/devboards/db1550.c
+++ linux-libre-6.8-gnu/arch/mips/alchemy/devboards/db1550.c
@@ -589,7 +589,7 @@ int __init db1550_dev_setup(void)
 	i2c_register_board_info(0, db1550_i2c_devs,
 				ARRAY_SIZE(db1550_i2c_devs));
 	spi_register_board_info(db1550_spi_devs,
-				ARRAY_SIZE(db1550_i2c_devs));
+				ARRAY_SIZE(db1550_spi_devs));
 
 	c = clk_get(NULL, "psc0_intclk");
 	if (!IS_ERR(c)) {
diff --git linux-libre-6.7-gnu/arch/mips/bcm47xx/buttons.c linux-libre-6.8-gnu/arch/mips/bcm47xx/buttons.c
index 437a737c01dd..46994f9bb821 100644
--- linux-libre-6.7-gnu/arch/mips/bcm47xx/buttons.c
+++ linux-libre-6.8-gnu/arch/mips/bcm47xx/buttons.c
@@ -147,21 +147,21 @@ static const struct gpio_keys_button
 bcm47xx_buttons_buffalo_whr_g125[] __initconst = {
 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
-	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode switch */
 };
 
 static const struct gpio_keys_button
 bcm47xx_buttons_buffalo_whr_g54s[] __initconst = {
 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
 	BCM47XX_GPIO_KEY_H(4, KEY_RESTART),
-	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode switch */
 };
 
 static const struct gpio_keys_button
 bcm47xx_buttons_buffalo_whr_hp_g54[] __initconst = {
 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
-	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode switch */
 };
 
 static const struct gpio_keys_button
diff --git linux-libre-6.7-gnu/arch/mips/bcm63xx/boards/board_bcm963xx.c linux-libre-6.8-gnu/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 01aff80a5967..99f321b6e417 100644
--- linux-libre-6.7-gnu/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ linux-libre-6.8-gnu/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -702,7 +702,7 @@ static struct ssb_sprom bcm63xx_sprom = {
 	.boardflags_hi		= 0x0000,
 };
 
-int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+static int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
 {
 	if (bus->bustype == SSB_BUSTYPE_PCI) {
 		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
diff --git linux-libre-6.7-gnu/arch/mips/bcm63xx/clk.c linux-libre-6.8-gnu/arch/mips/bcm63xx/clk.c
index 86a6e2590866..3144965fb7dc 100644
--- linux-libre-6.7-gnu/arch/mips/bcm63xx/clk.c
+++ linux-libre-6.8-gnu/arch/mips/bcm63xx/clk.c
@@ -174,7 +174,7 @@ static void enetsw_set(struct clk *clk, int enable)
 	}
 
 	if (enable) {
-		/* reset switch core afer clock change */
+		/* reset switch core after clock change */
 		bcm63xx_core_set_reset(BCM63XX_RESET_ENETSW, 1);
 		msleep(10);
 		bcm63xx_core_set_reset(BCM63XX_RESET_ENETSW, 0);
@@ -304,7 +304,7 @@ static void xtm_set(struct clk *clk, int enable)
 	bcm_hwclock_set(CKCTL_6368_SAR_EN, enable);
 
 	if (enable) {
-		/* reset sar core afer clock change */
+		/* reset sar core after clock change */
 		bcm63xx_core_set_reset(BCM63XX_RESET_SAR, 1);
 		mdelay(1);
 		bcm63xx_core_set_reset(BCM63XX_RESET_SAR, 0);
diff --git linux-libre-6.7-gnu/arch/mips/bcm63xx/dev-rng.c linux-libre-6.8-gnu/arch/mips/bcm63xx/dev-rng.c
index d277b4dc6c68..f94151f7c96f 100644
--- linux-libre-6.7-gnu/arch/mips/bcm63xx/dev-rng.c
+++ linux-libre-6.8-gnu/arch/mips/bcm63xx/dev-rng.c
@@ -26,7 +26,7 @@ static struct platform_device bcm63xx_rng_device = {
 	.resource	= rng_resources,
 };
 
-int __init bcm63xx_rng_register(void)
+static int __init bcm63xx_rng_register(void)
 {
 	if (!BCMCPU_IS_6368())
 		return -ENODEV;
diff --git linux-libre-6.7-gnu/arch/mips/bcm63xx/dev-uart.c linux-libre-6.8-gnu/arch/mips/bcm63xx/dev-uart.c
index 3bc7f3bfc9ad..5d6bf0445b29 100644
--- linux-libre-6.7-gnu/arch/mips/bcm63xx/dev-uart.c
+++ linux-libre-6.8-gnu/arch/mips/bcm63xx/dev-uart.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_uart.h>
 
 static struct resource uart0_resources[] = {
 	{
diff --git linux-libre-6.7-gnu/arch/mips/bcm63xx/dev-wdt.c linux-libre-6.8-gnu/arch/mips/bcm63xx/dev-wdt.c
index 42130914a3c2..302bf7ed5ad5 100644
--- linux-libre-6.7-gnu/arch/mips/bcm63xx/dev-wdt.c
+++ linux-libre-6.8-gnu/arch/mips/bcm63xx/dev-wdt.c
@@ -34,7 +34,7 @@ static struct platform_device bcm63xx_wdt_device = {
 	},
 };
 
-int __init bcm63xx_wdt_register(void)
+static int __init bcm63xx_wdt_register(void)
 {
 	wdt_resources[0].start = bcm63xx_regset_address(RSET_WDT);
 	wdt_resources[0].end = wdt_resources[0].start;
diff --git linux-libre-6.7-gnu/arch/mips/bcm63xx/irq.c linux-libre-6.8-gnu/arch/mips/bcm63xx/irq.c
index 2548013442f6..6240a8f88ea3 100644
--- linux-libre-6.7-gnu/arch/mips/bcm63xx/irq.c
+++ linux-libre-6.8-gnu/arch/mips/bcm63xx/irq.c
@@ -72,7 +72,7 @@ static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
  */
 
 #define BUILD_IPIC_INTERNAL(width)					\
-void __dispatch_internal_##width(int cpu)				\
+static void __dispatch_internal_##width(int cpu)			\
 {									\
 	u32 pending[width / 32];					\
 	unsigned int src, tgt;						\
diff --git linux-libre-6.7-gnu/arch/mips/bcm63xx/setup.c linux-libre-6.8-gnu/arch/mips/bcm63xx/setup.c
index d811e3e03f81..c13ddb544a23 100644
--- linux-libre-6.7-gnu/arch/mips/bcm63xx/setup.c
+++ linux-libre-6.8-gnu/arch/mips/bcm63xx/setup.c
@@ -159,7 +159,7 @@ void __init plat_mem_setup(void)
 	board_setup();
 }
 
-int __init bcm63xx_register_devices(void)
+static int __init bcm63xx_register_devices(void)
 {
 	/* register gpiochip */
 	bcm63xx_gpio_init();
diff --git linux-libre-6.7-gnu/arch/mips/bcm63xx/timer.c linux-libre-6.8-gnu/arch/mips/bcm63xx/timer.c
index a86065854c0c..74b83807df30 100644
--- linux-libre-6.7-gnu/arch/mips/bcm63xx/timer.c
+++ linux-libre-6.8-gnu/arch/mips/bcm63xx/timer.c
@@ -178,7 +178,7 @@ int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us)
 
 EXPORT_SYMBOL(bcm63xx_timer_set);
 
-int bcm63xx_timer_init(void)
+static int bcm63xx_timer_init(void)
 {
 	int ret, irq;
 	u32 reg;
diff --git linux-libre-6.7-gnu/arch/mips/boot/compressed/dbg.c linux-libre-6.8-gnu/arch/mips/boot/compressed/dbg.c
index f6728a8fd1c3..95405292accd 100644
--- linux-libre-6.7-gnu/arch/mips/boot/compressed/dbg.c
+++ linux-libre-6.8-gnu/arch/mips/boot/compressed/dbg.c
@@ -3,12 +3,14 @@
  * MIPS-specific debug support for pre-boot environment
  *
  * NOTE: putc() is board specific, if your board have a 16550 compatible uart,
- * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you
+ * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. otherwise, you
  * need to implement your own putc().
  */
 #include <linux/compiler.h>
 #include <linux/types.h>
 
+#include "decompress.h"
+
 void __weak putc(char c)
 {
 }
diff --git linux-libre-6.7-gnu/arch/mips/boot/compressed/decompress.c linux-libre-6.8-gnu/arch/mips/boot/compressed/decompress.c
index c5dd415254d3..adb6d5b0e6eb 100644
--- linux-libre-6.7-gnu/arch/mips/boot/compressed/decompress.c
+++ linux-libre-6.8-gnu/arch/mips/boot/compressed/decompress.c
@@ -19,6 +19,8 @@
 #include <asm/unaligned.h>
 #include <asm-generic/vmlinux.lds.h>
 
+#include "decompress.h"
+
 /*
  * These two variables specify the free mem region
  * that can be used for temporary malloc area
@@ -26,20 +28,6 @@
 unsigned long free_mem_ptr;
 unsigned long free_mem_end_ptr;
 
-/* The linker tells us where the image is. */
-extern unsigned char __image_begin[], __image_end[];
-
-/* debug interfaces  */
-#ifdef CONFIG_DEBUG_ZBOOT
-extern void puts(const char *s);
-extern void puthex(unsigned long long val);
-#else
-#define puts(s) do {} while (0)
-#define puthex(val) do {} while (0)
-#endif
-
-extern char __appended_dtb[];
-
 void error(char *x)
 {
 	puts("\n\n");
diff --git linux-libre-6.7-gnu/arch/mips/boot/compressed/decompress.h linux-libre-6.8-gnu/arch/mips/boot/compressed/decompress.h
new file mode 100644
index 000000000000..073b64593b3d
--- /dev/null
+++ linux-libre-6.8-gnu/arch/mips/boot/compressed/decompress.h
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef _DECOMPRESSOR_H
+#define _DECOMPRESSOR_H
+
+/* The linker tells us where the image is. */
+extern unsigned char __image_begin[], __image_end[];
+
+/* debug interfaces  */
+#ifdef CONFIG_DEBUG_ZBOOT
+extern void putc(char c);
+extern void puts(const char *s);
+extern void puthex(unsigned long long val);
+#else
+#define putc(s) do {} while (0)
+#define puts(s) do {} while (0)
+#define puthex(val) do {} while (0)
+#endif
+
+extern char __appended_dtb[];
+
+void error(char *x);
+void decompress_kernel(unsigned long boot_heap_start);
+
+#endif
diff --git linux-libre-6.7-gnu/arch/mips/boot/compressed/head.S linux-libre-6.8-gnu/arch/mips/boot/compressed/head.S
index 5795d0af1e1b..d237a834b85e 100644
--- linux-libre-6.7-gnu/arch/mips/boot/compressed/head.S
+++ linux-libre-6.8-gnu/arch/mips/boot/compressed/head.S
@@ -25,8 +25,8 @@
 	/* Clear BSS */
 	PTR_LA	a0, _edata
 	PTR_LA	a2, _end
-1:	sw	zero, 0(a0)
-	addiu	a0, a0, 4
+1:	PTR_S	zero, 0(a0)
+	PTR_ADDIU a0, a0, PTRSIZE
 	bne	a2, a0, 1b
 
 	PTR_LA	a0, (.heap)	     /* heap address */
diff --git linux-libre-6.7-gnu/arch/mips/boot/compressed/string.c linux-libre-6.8-gnu/arch/mips/boot/compressed/string.c
index 0b593b709228..f0eb251e44e5 100644
--- linux-libre-6.7-gnu/arch/mips/boot/compressed/string.c
+++ linux-libre-6.8-gnu/arch/mips/boot/compressed/string.c
@@ -7,6 +7,7 @@
 
 #include <linux/compiler_attributes.h>
 #include <linux/types.h>
+#include <asm/string.h>
 
 void *memcpy(void *dest, const void *src, size_t n)
 {
diff --git linux-libre-6.7-gnu/arch/mips/boot/elf2ecoff.c linux-libre-6.8-gnu/arch/mips/boot/elf2ecoff.c
index 6972b97235da..549c5d6ef6d7 100644
--- linux-libre-6.7-gnu/arch/mips/boot/elf2ecoff.c
+++ linux-libre-6.8-gnu/arch/mips/boot/elf2ecoff.c
@@ -443,7 +443,7 @@ int main(int argc, char *argv[])
 	efh.f_symptr = 0;
 	efh.f_nsyms = 0;
 	efh.f_opthdr = sizeof eah;
-	efh.f_flags = 0x100f;	/* Stripped, not sharable. */
+	efh.f_flags = 0x100f;	/* Stripped, not shareable. */
 
 	memset(esecs, 0, sizeof esecs);
 	strcpy(esecs[0].s_name, ".text");
diff --git linux-libre-6.7-gnu/arch/mips/cavium-octeon/csrc-octeon.c linux-libre-6.8-gnu/arch/mips/cavium-octeon/csrc-octeon.c
index 124817609ce0..af62a210a40b 100644
--- linux-libre-6.7-gnu/arch/mips/cavium-octeon/csrc-octeon.c
+++ linux-libre-6.8-gnu/arch/mips/cavium-octeon/csrc-octeon.c
@@ -113,7 +113,7 @@ static struct clocksource clocksource_mips = {
 
 unsigned long long notrace sched_clock(void)
 {
-	/* 64-bit arithmatic can overflow, so use 128-bit.  */
+	/* 64-bit arithmetic can overflow, so use 128-bit.  */
 	u64 t1, t2, t3;
 	unsigned long long rv;
 	u64 mult = clocksource_mips.mult;
diff --git linux-libre-6.7-gnu/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c linux-libre-6.8-gnu/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c
index b7019d21808e..76446db66def 100644
--- linux-libre-6.7-gnu/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c
+++ linux-libre-6.8-gnu/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c
@@ -143,7 +143,7 @@ static void cvmx_boot_vector_init(void *mem)
 		uint64_t v = _cvmx_bootvector_data[i];
 
 		if (OCTEON_IS_OCTEON1PLUS() && (i == 0 || i == 7))
-			v &= 0xffffffff00000000ull; /* KScratch not availble. */
+			v &= 0xffffffff00000000ull; /* KScratch not available */
 		cvmx_write_csr(CVMX_MIO_BOOT_LOC_ADR, i * 8);
 		cvmx_write_csr(CVMX_MIO_BOOT_LOC_DAT, v);
 	}
diff --git linux-libre-6.7-gnu/arch/mips/cavium-octeon/executive/cvmx-bootmem.c linux-libre-6.8-gnu/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
index 334bf8e577e5..628ebdf4b9c5 100644
--- linux-libre-6.7-gnu/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
+++ linux-libre-6.8-gnu/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
@@ -264,7 +264,7 @@ int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min,
 	 * Convert !0 address_min and 0 address_max to special case of
 	 * range that specifies an exact memory block to allocate.  Do
 	 * this before other checks and adjustments so that this
-	 * tranformation will be validated.
+	 * transformation will be validated.
 	 */
 	if (address_min && !address_max)
 		address_max = address_min + req_size;
diff --git linux-libre-6.7-gnu/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c linux-libre-6.8-gnu/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c
index aa7bbf8d0df5..042a6bc44b5c 100644
--- linux-libre-6.7-gnu/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c
+++ linux-libre-6.8-gnu/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c
@@ -192,7 +192,7 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id,
 }
 
 /*
- * Shutdown a queue a free it's command buffers to the FPA. The
+ * Shutdown a queue and free its command buffers to the FPA. The
  * hardware connected to the queue must be stopped before this
  * function is called.
  *
@@ -285,7 +285,7 @@ int cvmx_cmd_queue_length(cvmx_cmd_queue_id_t queue_id)
 
 /*
  * Return the command buffer to be written to. The purpose of this
- * function is to allow CVMX routine access t othe low level buffer
+ * function is to allow CVMX routine access to the low level buffer
  * for initial hardware setup. User applications should not call this
  * function directly.
  *
diff --git linux-libre-6.7-gnu/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c linux-libre-6.8-gnu/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
index 607b4e659579..1fceb7fd2c94 100644
--- linux-libre-6.7-gnu/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
+++ linux-libre-6.8-gnu/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
@@ -103,7 +103,7 @@ uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data)
 /**
  * Shift long sequences of zeros into the QLM JTAG chain. It is
  * common to need to shift more than 32 bits of zeros into the
- * chain. This function is a convience wrapper around
+ * chain. This function is a convenience wrapper around
  * cvmx_helper_qlm_jtag_shift() to shift more than 32 bits of
  * zeros at a time.
  *
diff --git linux-libre-6.7-gnu/arch/mips/cavium-octeon/executive/cvmx-pko.c linux-libre-6.8-gnu/arch/mips/cavium-octeon/executive/cvmx-pko.c
index 15faca494c80..6e70b859a0ac 100644
--- linux-libre-6.7-gnu/arch/mips/cavium-octeon/executive/cvmx-pko.c
+++ linux-libre-6.8-gnu/arch/mips/cavium-octeon/executive/cvmx-pko.c
@@ -615,7 +615,7 @@ int cvmx_pko_rate_limit_bits(int port, uint64_t bits_s, int burst)
 	/*
 	 * Each packet has a 12 bytes of interframe gap, an 8 byte
 	 * preamble, and a 4 byte CRC. These are not included in the
-	 * per word count. Multiply by 8 to covert to bits and divide
+	 * per word count. Multiply by 8 to convert to bits and divide
 	 * by 256 for limit granularity.
 	 */
 	pko_mem_port_rate0.s.rate_pkt = (12 + 8 + 4) * 8 * tokens_per_bit / 256;
diff --git linux-libre-6.7-gnu/arch/mips/cavium-octeon/octeon-platform.c linux-libre-6.8-gnu/arch/mips/cavium-octeon/octeon-platform.c
index f76783c24338..5e1dd4e6e82f 100644
--- linux-libre-6.7-gnu/arch/mips/cavium-octeon/octeon-platform.c
+++ linux-libre-6.8-gnu/arch/mips/cavium-octeon/octeon-platform.c
@@ -973,7 +973,7 @@ int __init octeon_prune_device_tree(void)
 			 * zero.
 			 */
 
-			/* Asume that CS1 immediately follows. */
+			/* Assume that CS1 immediately follows. */
 			mio_boot_reg_cfg.u64 =
 				cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs + 1));
 			region1_base = mio_boot_reg_cfg.s.base << 16;
diff --git linux-libre-6.7-gnu/arch/mips/cobalt/setup.c linux-libre-6.8-gnu/arch/mips/cobalt/setup.c
index 2e099d55a564..9a266bf78339 100644
--- linux-libre-6.7-gnu/arch/mips/cobalt/setup.c
+++ linux-libre-6.8-gnu/arch/mips/cobalt/setup.c
@@ -23,9 +23,6 @@
 
 #include <cobalt.h>
 
-extern void cobalt_machine_restart(char *command);
-extern void cobalt_machine_halt(void);
-
 const char *get_system_type(void)
 {
 	switch (cobalt_board_id) {
diff --git linux-libre-6.7-gnu/arch/mips/configs/ip22_defconfig linux-libre-6.8-gnu/arch/mips/configs/ip22_defconfig
index dc49b09d492b..e22e8b825903 100644
--- linux-libre-6.7-gnu/arch/mips/configs/ip22_defconfig
+++ linux-libre-6.8-gnu/arch/mips/configs/ip22_defconfig
@@ -173,7 +173,6 @@ CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
diff --git linux-libre-6.7-gnu/arch/mips/configs/ip27_defconfig linux-libre-6.8-gnu/arch/mips/configs/ip27_defconfig
index b51f738a39a0..4714074c8bd7 100644
--- linux-libre-6.7-gnu/arch/mips/configs/ip27_defconfig
+++ linux-libre-6.8-gnu/arch/mips/configs/ip27_defconfig
@@ -287,7 +287,8 @@ CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_FUSE_FS=m
 CONFIG_CUSE=m
-CONFIG_FSCACHE=m
+CONFIG_NETFS_SUPPORT=m
+CONFIG_FSCACHE=y
 CONFIG_FSCACHE_STATS=y
 CONFIG_CACHEFILES=m
 CONFIG_PROC_KCORE=y
diff --git linux-libre-6.7-gnu/arch/mips/configs/lemote2f_defconfig linux-libre-6.8-gnu/arch/mips/configs/lemote2f_defconfig
index 38f17b658421..3389e6e885d9 100644
--- linux-libre-6.7-gnu/arch/mips/configs/lemote2f_defconfig
+++ linux-libre-6.8-gnu/arch/mips/configs/lemote2f_defconfig
@@ -238,7 +238,8 @@ CONFIG_BTRFS_FS=m
 CONFIG_QUOTA=y
 CONFIG_QFMT_V2=m
 CONFIG_AUTOFS_FS=m
-CONFIG_FSCACHE=m
+CONFIG_NETFS_SUPPORT=m
+CONFIG_FSCACHE=y
 CONFIG_CACHEFILES=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
diff --git linux-libre-6.7-gnu/arch/mips/configs/loongson3_defconfig linux-libre-6.8-gnu/arch/mips/configs/loongson3_defconfig
index 07839a4b397e..78f498752066 100644
--- linux-libre-6.7-gnu/arch/mips/configs/loongson3_defconfig
+++ linux-libre-6.8-gnu/arch/mips/configs/loongson3_defconfig
@@ -356,7 +356,8 @@ CONFIG_QFMT_V2=m
 CONFIG_AUTOFS_FS=y
 CONFIG_FUSE_FS=m
 CONFIG_VIRTIO_FS=m
-CONFIG_FSCACHE=m
+CONFIG_NETFS_SUPPORT=m
+CONFIG_FSCACHE=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_MSDOS_FS=m
diff --git linux-libre-6.7-gnu/arch/mips/configs/malta_defconfig linux-libre-6.8-gnu/arch/mips/configs/malta_defconfig
index 6f8046024557..4390d30206d9 100644
--- linux-libre-6.7-gnu/arch/mips/configs/malta_defconfig
+++ linux-libre-6.8-gnu/arch/mips/configs/malta_defconfig
@@ -202,7 +202,6 @@ CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
diff --git linux-libre-6.7-gnu/arch/mips/configs/malta_kvm_defconfig linux-libre-6.8-gnu/arch/mips/configs/malta_kvm_defconfig
index 16a91eeff67f..d63d8be8cb50 100644
--- linux-libre-6.7-gnu/arch/mips/configs/malta_kvm_defconfig
+++ linux-libre-6.8-gnu/arch/mips/configs/malta_kvm_defconfig
@@ -206,7 +206,6 @@ CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
diff --git linux-libre-6.7-gnu/arch/mips/configs/maltaup_xpa_defconfig linux-libre-6.8-gnu/arch/mips/configs/maltaup_xpa_defconfig
index 264aba29ea4f..338bb6544a93 100644
--- linux-libre-6.7-gnu/arch/mips/configs/maltaup_xpa_defconfig
+++ linux-libre-6.8-gnu/arch/mips/configs/maltaup_xpa_defconfig
@@ -203,7 +203,6 @@ CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
diff --git linux-libre-6.7-gnu/arch/mips/configs/pic32mzda_defconfig linux-libre-6.8-gnu/arch/mips/configs/pic32mzda_defconfig
index 166d2ad372d1..54774f90c23e 100644
--- linux-libre-6.7-gnu/arch/mips/configs/pic32mzda_defconfig
+++ linux-libre-6.8-gnu/arch/mips/configs/pic32mzda_defconfig
@@ -68,7 +68,8 @@ CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_FUSE_FS=m
-CONFIG_FSCACHE=m
+CONFIG_NETFS_SUPPORT=m
+CONFIG_FSCACHE=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
diff --git linux-libre-6.7-gnu/arch/mips/configs/rb532_defconfig linux-libre-6.8-gnu/arch/mips/configs/rb532_defconfig
index 02ec6c1a5116..517f1b060bf4 100644
--- linux-libre-6.7-gnu/arch/mips/configs/rb532_defconfig
+++ linux-libre-6.8-gnu/arch/mips/configs/rb532_defconfig
@@ -96,7 +96,6 @@ CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_HAMRADIO=y
 CONFIG_MTD=y
diff --git linux-libre-6.7-gnu/arch/mips/fw/arc/memory.c linux-libre-6.8-gnu/arch/mips/fw/arc/memory.c
index 66188739f54d..fb78e6fd5de4 100644
--- linux-libre-6.7-gnu/arch/mips/fw/arc/memory.c
+++ linux-libre-6.8-gnu/arch/mips/fw/arc/memory.c
@@ -37,7 +37,7 @@ static unsigned int nr_prom_mem __initdata;
  */
 #define ARC_PAGE_SHIFT	12
 
-struct linux_mdesc * __init ArcGetMemoryDescriptor(struct linux_mdesc *Current)
+static struct linux_mdesc * __init ArcGetMemoryDescriptor(struct linux_mdesc *Current)
 {
 	return (struct linux_mdesc *) ARC_CALL1(get_mdesc, Current);
 }
diff --git linux-libre-6.7-gnu/arch/mips/fw/arc/promlib.c linux-libre-6.8-gnu/arch/mips/fw/arc/promlib.c
index 5e9e840a9314..93e1e70393ee 100644
--- linux-libre-6.7-gnu/arch/mips/fw/arc/promlib.c
+++ linux-libre-6.8-gnu/arch/mips/fw/arc/promlib.c
@@ -15,11 +15,11 @@
 /*
  * For 64bit kernels working with a 32bit ARC PROM pointer arguments
  * for ARC calls need to reside in CKEG0/1. But as soon as the kernel
- * switches to it's first kernel thread stack is set to an address in
+ * switches to its first kernel thread stack is set to an address in
  * XKPHYS, so anything on stack can't be used anymore. This is solved
- * by using a * static declartion variables are put into BSS, which is
+ * by using a * static declaration variables are put into BSS, which is
  * linked to a CKSEG0 address. Since this is only used on UP platforms
- * there is not spinlock needed
+ * there is no spinlock needed
  */
 #define O32_STATIC	static
 #else
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/cache.h linux-libre-6.8-gnu/arch/mips/include/asm/cache.h
index 3424a7908c0f..8b08db3fb17a 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/cache.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/cache.h
@@ -17,5 +17,11 @@
 #define __read_mostly __section(".data..read_mostly")
 
 extern void cache_noop(void);
+extern void r3k_cache_init(void);
+extern unsigned long r3k_cache_size(unsigned long);
+extern unsigned long r3k_cache_lsize(unsigned long);
+extern void r4k_cache_init(void);
+extern void octeon_cache_init(void);
+extern void au1x00_fixup_config_od(void);
 
 #endif /* _ASM_CACHE_H */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/cacheflush.h linux-libre-6.8-gnu/arch/mips/include/asm/cacheflush.h
index f36c2519ed97..1f14132b3fc9 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/cacheflush.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/cacheflush.h
@@ -97,6 +97,8 @@ static inline void flush_cache_vmap(unsigned long start, unsigned long end)
 		__flush_cache_vmap();
 }
 
+#define flush_cache_vmap_early(start, end)     do { } while (0)
+
 extern void (*__flush_cache_vunmap)(void);
 
 static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/checksum.h linux-libre-6.8-gnu/arch/mips/include/asm/checksum.h
index 4044eaf989ac..0921ddda11a4 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/checksum.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/checksum.h
@@ -241,7 +241,8 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 	"	.set	pop"
 	: "=&r" (sum), "=&r" (tmp)
 	: "r" (saddr), "r" (daddr),
-	  "0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
+	  "0" (htonl(len)), "r" (htonl(proto)), "r" (sum)
+	: "memory");
 
 	return csum_fold(sum);
 }
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/debug.h linux-libre-6.8-gnu/arch/mips/include/asm/debug.h
index c7013e1cb53f..e70392429246 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/debug.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/debug.h
@@ -10,7 +10,7 @@
 
 /*
  * mips_debugfs_dir corresponds to the "mips" directory at the top level
- * of the DebugFS hierarchy. MIPS-specific DebugFS entires should be
+ * of the DebugFS hierarchy. MIPS-specific DebugFS entries should be
  * placed beneath this directory.
  */
 extern struct dentry *mips_debugfs_dir;
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/dmi.h linux-libre-6.8-gnu/arch/mips/include/asm/dmi.h
index 27415a288adf..dc397f630c66 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/dmi.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/dmi.h
@@ -5,7 +5,7 @@
 #include <linux/io.h>
 #include <linux/memblock.h>
 
-#define dmi_early_remap(x, l)		ioremap_cache(x, l)
+#define dmi_early_remap(x, l)		ioremap(x, l)
 #define dmi_early_unmap(x, l)		iounmap(x)
 #define dmi_remap(x, l)			ioremap_cache(x, l)
 #define dmi_unmap(x)			iounmap(x)
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/ftrace.h linux-libre-6.8-gnu/arch/mips/include/asm/ftrace.h
index db497a8167da..dc025888f6d2 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/ftrace.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/ftrace.h
@@ -85,6 +85,10 @@ struct dyn_arch_ftrace {
 };
 
 #endif /*  CONFIG_DYNAMIC_FTRACE */
+
+void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
+			   unsigned long fp);
+
 #endif /* __ASSEMBLY__ */
 #endif /* CONFIG_FUNCTION_TRACER */
 #endif /* _ASM_MIPS_FTRACE_H */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/io.h linux-libre-6.8-gnu/arch/mips/include/asm/io.h
index 062dd4e6b954..af58d6ae06b8 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/io.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/io.h
@@ -13,7 +13,6 @@
 #define _ASM_IO_H
 
 #include <linux/compiler.h>
-#include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/irqflags.h>
 
@@ -25,7 +24,6 @@
 #include <asm/cpu-features.h>
 #include <asm/page.h>
 #include <asm/pgtable-bits.h>
-#include <asm/processor.h>
 #include <asm/string.h>
 #include <mangle-port.h>
 
@@ -41,6 +39,11 @@
 # define __raw_ioswabq(a, x)	(x)
 # define ____raw_ioswabq(a, x)	(x)
 
+# define _ioswabb ioswabb
+# define _ioswabw ioswabw
+# define _ioswabl ioswabl
+# define _ioswabq ioswabq
+
 # define __relaxed_ioswabb ioswabb
 # define __relaxed_ioswabw ioswabw
 # define __relaxed_ioswabl ioswabl
@@ -114,23 +117,6 @@ static inline phys_addr_t virt_to_phys(const volatile void *x)
 	return __virt_to_phys(x);
 }
 
-/*
- *     phys_to_virt    -       map physical address to virtual
- *     @address: address to remap
- *
- *     The returned virtual address is a current CPU mapping for
- *     the memory address given. It is only valid to use this function on
- *     addresses that have a kernel mapping
- *
- *     This function does not handle bus mappings for DMA transfers. In
- *     almost all conceivable cases a device driver should not be using
- *     this function
- */
-static inline void * phys_to_virt(unsigned long address)
-{
-	return __va(address);
-}
-
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
  */
@@ -139,11 +125,6 @@ static inline unsigned long isa_virt_to_bus(volatile void *address)
 	return virt_to_phys(address);
 }
 
-static inline void *isa_bus_to_virt(unsigned long address)
-{
-	return phys_to_virt(address);
-}
-
 /*
  * Change "struct page" to physical address.
  */
@@ -166,7 +147,6 @@ void iounmap(const volatile void __iomem *addr);
  */
 #define ioremap(offset, size)						\
 	ioremap_prot((offset), (size), _CACHE_UNCACHED)
-#define ioremap_uc		ioremap
 
 /*
  * ioremap_cache -	map bus memory into CPU space
@@ -179,7 +159,7 @@ void iounmap(const volatile void __iomem *addr);
  * address is not guaranteed to be usable directly as a virtual
  * address.
  *
- * This version of ioremap ensures that the memory is marked cachable by
+ * This version of ioremap ensures that the memory is marked cacheable by
  * the CPU.  Also enables full write-combining.	 Useful for some
  * memory-like regions on I/O busses.
  */
@@ -197,7 +177,7 @@ void iounmap(const volatile void __iomem *addr);
  * address is not guaranteed to be usable directly as a virtual
  * address.
  *
- * This version of ioremap ensures that the memory is marked uncachable
+ * This version of ioremap ensures that the memory is marked uncacheable
  * but accelerated by means of write-combining feature. It is specifically
  * useful for PCIe prefetchable windows, which may vastly improve a
  * communications performance. If it was determined on boot stage, what
@@ -207,8 +187,6 @@ void iounmap(const volatile void __iomem *addr);
 #define ioremap_wc(offset, size)					\
 	ioremap_prot((offset), (size), boot_cpu_data.writecombine)
 
-#include <asm-generic/iomap.h>
-
 #if defined(CONFIG_CPU_CAVIUM_OCTEON)
 #define war_io_reorder_wmb()		wmb()
 #else
@@ -296,9 +274,9 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem)	\
 	return pfx##ioswab##bwlq(__mem, __val);				\
 }
 
-#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, barrier, relax, p)	\
+#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, barrier, relax)		\
 									\
-static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
+static inline void pfx##out##bwlq(type val, unsigned long port)		\
 {									\
 	volatile type *__addr;						\
 	type __val;							\
@@ -318,7 +296,7 @@ static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
 	*__addr = __val;						\
 }									\
 									\
-static inline type pfx##in##bwlq##p(unsigned long port)			\
+static inline type pfx##in##bwlq(unsigned long port)			\
 {									\
 	volatile type *__addr;						\
 	type __val;							\
@@ -360,11 +338,10 @@ __BUILD_MEMORY_PFX(__mem_, q, u64, 0)
 #endif
 
 #define __BUILD_IOPORT_PFX(bus, bwlq, type)				\
-	__BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0,)			\
-	__BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0, _p)
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0)
 
 #define BUILDIO_IOPORT(bwlq, type)					\
-	__BUILD_IOPORT_PFX(, bwlq, type)				\
+	__BUILD_IOPORT_PFX(_, bwlq, type)				\
 	__BUILD_IOPORT_PFX(__mem_, bwlq, type)
 
 BUILDIO_IOPORT(b, u8)
@@ -412,14 +389,6 @@ __BUILDIO(q, u64)
 #define writeq_be(val, addr)						\
 	__raw_writeq(cpu_to_be64((val)), (__force unsigned *)(addr))
 
-/*
- * Some code tests for these symbols
- */
-#ifdef CONFIG_64BIT
-#define readq				readq
-#define writeq				writeq
-#endif
-
 #define __BUILD_MEMORY_STRING(bwlq, type)				\
 									\
 static inline void writes##bwlq(volatile void __iomem *mem,		\
@@ -480,18 +449,6 @@ BUILDSTRING(l, u32)
 BUILDSTRING(q, u64)
 #endif
 
-static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
-	memset((void __force *) addr, val, count);
-}
-static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
-{
-	memcpy(dst, (void __force *) src, count);
-}
-static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
-	memcpy((void __force *) dst, src, count);
-}
 
 /*
  * The caches on some architectures aren't dma-coherent and have need to
@@ -548,13 +505,66 @@ extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
 #define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
 #define csr_in32(a)    (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-#define unxlate_dev_mem_ptr(p, v) do { } while (0)
+#define __raw_readb __raw_readb
+#define __raw_readw __raw_readw
+#define __raw_readl __raw_readl
+#ifdef CONFIG_64BIT
+#define __raw_readq __raw_readq
+#endif
+#define __raw_writeb __raw_writeb
+#define __raw_writew __raw_writew
+#define __raw_writel __raw_writel
+#ifdef CONFIG_64BIT
+#define __raw_writeq __raw_writeq
+#endif
+
+#define readb readb
+#define readw readw
+#define readl readl
+#ifdef CONFIG_64BIT
+#define readq readq
+#endif
+#define writeb writeb
+#define writew writew
+#define writel writel
+#ifdef CONFIG_64BIT
+#define writeq writeq
+#endif
+
+#define readsb readsb
+#define readsw readsw
+#define readsl readsl
+#ifdef CONFIG_64BIT
+#define readsq readsq
+#endif
+#define writesb writesb
+#define writesw writesw
+#define writesl writesl
+#ifdef CONFIG_64BIT
+#define writesq writesq
+#endif
+
+#define _inb _inb
+#define _inw _inw
+#define _inl _inl
+#define insb insb
+#define insw insw
+#define insl insl
+
+#define _outb _outb
+#define _outw _outw
+#define _outl _outl
+#define outsb outsb
+#define outsw outsw
+#define outsl outsl
 
 void __ioread64_copy(void *to, const void __iomem *from, size_t count);
 
+#include <asm-generic/io.h>
+
+static inline void *isa_bus_to_virt(unsigned long address)
+{
+	return phys_to_virt(address);
+}
+
 #endif /* _ASM_IO_H */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/jump_label.h linux-libre-6.8-gnu/arch/mips/include/asm/jump_label.h
index c5c6864e64bc..ff5d388502d4 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/jump_label.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/jump_label.h
@@ -15,6 +15,9 @@
 #include <linux/types.h>
 #include <asm/isa-rev.h>
 
+struct module;
+extern void jump_label_apply_nops(struct module *mod);
+
 #define JUMP_LABEL_NOP_SIZE 4
 
 #ifdef CONFIG_64BIT
@@ -36,7 +39,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\t" B_INSN " 2f\n\t"
+	asm goto("1:\t" B_INSN " 2f\n\t"
 		"2:\t.insn\n\t"
 		".pushsection __jump_table,  \"aw\"\n\t"
 		WORD_INSN " 1b, %l[l_yes], %0\n\t"
@@ -50,7 +53,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\t" J_INSN " %l[l_yes]\n\t"
+	asm goto("1:\t" J_INSN " %l[l_yes]\n\t"
 		".pushsection __jump_table,  \"aw\"\n\t"
 		WORD_INSN " 1b, %l[l_yes], %0\n\t"
 		".popsection\n\t"
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/kvm_host.h linux-libre-6.8-gnu/arch/mips/include/asm/kvm_host.h
index 54a85f1d4f2c..179f320cc231 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/kvm_host.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/kvm_host.h
@@ -810,8 +810,6 @@ int kvm_mips_mkclean_gpa_pt(struct kvm *kvm, gfn_t start_gfn, gfn_t end_gfn);
 pgd_t *kvm_pgd_alloc(void);
 void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu);
 
-#define KVM_ARCH_WANT_MMU_NOTIFIER
-
 /* Emulation */
 enum emulation_result update_pc(struct kvm_vcpu *vcpu, u32 cause);
 int kvm_get_badinstr(u32 *opc, struct kvm_vcpu *vcpu, u32 *out);
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mach-au1x00/au1000.h linux-libre-6.8-gnu/arch/mips/include/asm/mach-au1x00/au1000.h
index a7eec3364a64..41546777902b 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mach-au1x00/au1000.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -597,6 +597,9 @@
 
 #include <asm/cpu.h>
 
+void alchemy_set_lpj(void);
+void board_setup(void);
+
 /* helpers to access the SYS_* registers */
 static inline unsigned long alchemy_rdsys(int regofs)
 {
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mach-au1x00/au1000_dma.h linux-libre-6.8-gnu/arch/mips/include/asm/mach-au1x00/au1000_dma.h
index 0a0cd4270c6f..b82e513c8523 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mach-au1x00/au1000_dma.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mach-au1x00/au1000_dma.h
@@ -259,7 +259,7 @@ static inline void set_dma_mode(unsigned int dmanr, unsigned int mode)
 	if (!chan)
 		return;
 	/*
-	 * set_dma_mode is only allowed to change endianess, direction,
+	 * set_dma_mode is only allowed to change endianness, direction,
 	 * transfer size, device FIFO width, and coherency settings.
 	 * Make sure anything else is masked off.
 	 */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mach-au1x00/gpio-au1000.h linux-libre-6.8-gnu/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 82bc2766e2ec..d820b481ac56 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -435,7 +435,7 @@ static inline void alchemy_gpio2_disable_int(int gpio2)
 /**
  * alchemy_gpio2_enable -  Activate GPIO2 block.
  *
- * The GPIO2 block must be enabled excplicitly to work.	 On systems
+ * The GPIO2 block must be enabled explicitly to work.	 On systems
  * where this isn't done by the bootloader, this macro can be used.
  */
 static inline void alchemy_gpio2_enable(void)
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mach-cobalt/cobalt.h linux-libre-6.8-gnu/arch/mips/include/asm/mach-cobalt/cobalt.h
index 5b9fce73f11d..97f9d5e9446d 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mach-cobalt/cobalt.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mach-cobalt/cobalt.h
@@ -19,4 +19,7 @@ extern int cobalt_board_id;
 #define COBALT_BRD_ID_QUBE2    0x5
 #define COBALT_BRD_ID_RAQ2     0x6
 
+void cobalt_machine_halt(void);
+void cobalt_machine_restart(char *command);
+
 #endif /* __ASM_COBALT_H */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h linux-libre-6.8-gnu/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
index 5855ba1bd1ec..40eaa72e54d0 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
@@ -55,7 +55,7 @@ extern __iomem void *ltq_sys1_membase;
 #define ltq_sys1_w32_mask(clear, set, reg)   \
 	ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg)
 
-/* allow the gpio and pinctrl drivers to talk to eachother */
+/* allow the gpio and pinctrl drivers to talk to each other */
 extern int pinctrl_falcon_get_range_size(int id);
 extern void pinctrl_falcon_add_gpio_range(struct pinctrl_gpio_range *range);
 
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h linux-libre-6.8-gnu/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h
index 545f91f2ae16..721eafc4644e 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h
@@ -42,7 +42,7 @@ struct loongson_fan_policy {
 	/* period between two check. (Unit: S) */
 	u8	adjust_period;
 
-	/* fan adjust usually depend on a temprature input */
+	/* fan adjust usually depend on a temperature input */
 	get_temp_fun	depend_temp;
 
 	/* up_step/down_step used when type is STEP_SPEED_POLICY */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mach-loongson64/loongson_regs.h linux-libre-6.8-gnu/arch/mips/include/asm/mach-loongson64/loongson_regs.h
index b5be7511f6cd..fec767507604 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mach-loongson64/loongson_regs.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mach-loongson64/loongson_regs.h
@@ -227,7 +227,7 @@ static inline void csr_writeq(u64 val, u32 reg)
 #define LOONGSON_CSR_NODECNT	0x408
 #define LOONGSON_CSR_CPUTEMP	0x428
 
-/* PerCore CSR, only accessable by local cores */
+/* PerCore CSR, only accessible by local cores */
 #define LOONGSON_CSR_IPI_STATUS	0x1000
 #define LOONGSON_CSR_IPI_EN	0x1004
 #define LOONGSON_CSR_IPI_SET	0x1008
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mach-loongson64/mmzone.h linux-libre-6.8-gnu/arch/mips/include/asm/mach-loongson64/mmzone.h
index ebb1deaa77b9..a3d65d37b8b5 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mach-loongson64/mmzone.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mach-loongson64/mmzone.h
@@ -18,7 +18,6 @@ extern struct pglist_data *__node_data[];
 
 #define NODE_DATA(n)		(__node_data[n])
 
-extern void setup_zero_pages(void);
 extern void __init prom_init_numa_memory(void);
 
 #endif /* _ASM_MACH_MMZONE_H */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mach-malta/spaces.h linux-libre-6.8-gnu/arch/mips/include/asm/mach-malta/spaces.h
index d7e54971ec66..1ce4ba97852f 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mach-malta/spaces.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mach-malta/spaces.h
@@ -23,13 +23,13 @@
  * The kernel is still located in 0x80000000(kseg0). However,
  * the physical mask has been shifted to 0x80000000 which exploits the alias
  * on the Malta board. As a result of which, we override the __pa_symbol
- * to peform direct mapping from virtual to physical addresses. In other
+ * to perform direct mapping from virtual to physical addresses. In other
  * words, the 0x80000000 virtual address maps to 0x80000000 physical address
  * which in turn aliases to 0x0. We do this in order to be able to use a flat
  * 2GB of memory (0x80000000 - 0xffffffff) so we can avoid the I/O hole in
  * 0x10000000 - 0x1fffffff.
  * The last 64KB of physical memory are reserved for correct HIGHMEM
- * macros arithmetics.
+ * macros arithmetic.
  *
  */
 
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mips-boards/bonito64.h linux-libre-6.8-gnu/arch/mips/include/asm/mips-boards/bonito64.h
index 5368891d424b..31a31fe78d77 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mips-boards/bonito64.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mips-boards/bonito64.h
@@ -16,7 +16,7 @@
  */
 
 /* Revision 1.48 autogenerated on 08/17/99 15:20:01 */
-/* This bonito64 version editted from bonito.h Revision 1.48 on 11/09/00 */
+/* This bonito64 version edited from bonito.h Revision 1.48 on 11/09/00 */
 
 #ifndef _ASM_MIPS_BOARDS_BONITO64_H
 #define _ASM_MIPS_BOARDS_BONITO64_H
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mips-cpc.h linux-libre-6.8-gnu/arch/mips/include/asm/mips-cpc.h
index b54453f1648c..5f3a7a9f42bf 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mips-cpc.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mips-cpc.h
@@ -22,7 +22,7 @@ extern void __iomem *mips_cpc_base;
  *                              the CPC
  *
  * Returns the default physical base address of the Cluster Power Controller
- * memory mapped registers. This is platform dependant & must therefore be
+ * memory mapped registers. This is platform dependent & must therefore be
  * implemented per-platform.
  */
 extern phys_addr_t mips_cpc_default_phys_base(void);
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mipsregs.h linux-libre-6.8-gnu/arch/mips/include/asm/mipsregs.h
index 2d53704d9f24..ec58cb76d076 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mipsregs.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mipsregs.h
@@ -98,7 +98,7 @@
 
 /*
  * R4640/R4650 cp0 register names.  These registers are listed
- * here only for completeness; without MMU these CPUs are not useable
+ * here only for completeness; without MMU these CPUs are not usable
  * by Linux.  A future ELKS port might take make Linux run on them
  * though ...
  */
@@ -461,7 +461,7 @@
 #define EXCCODE_THREAD		25	/* Thread exceptions (MT) */
 #define EXCCODE_DSPDIS		26	/* DSP disabled exception */
 #define EXCCODE_GE		27	/* Virtualized guest exception (VZ) */
-#define EXCCODE_CACHEERR	30	/* Parity/ECC occured on a core */
+#define EXCCODE_CACHEERR	30	/* Parity/ECC occurred on a core */
 
 /* Implementation specific trap codes used by MIPS cores */
 #define MIPS_EXCCODE_TLBPAR	16	/* TLB parity error exception */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mmiowb.h linux-libre-6.8-gnu/arch/mips/include/asm/mmiowb.h
index a40824e3ef8e..cf27752fd220 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mmiowb.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mmiowb.h
@@ -2,9 +2,9 @@
 #ifndef _ASM_MMIOWB_H
 #define _ASM_MMIOWB_H
 
-#include <asm/io.h>
+#include <asm/barrier.h>
 
-#define mmiowb()	iobarrier_w()
+#define mmiowb()	wmb()
 
 #include <asm-generic/mmiowb.h>
 
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/mmzone.h linux-libre-6.8-gnu/arch/mips/include/asm/mmzone.h
index 602a21aee9d4..14226ea42036 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/mmzone.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/mmzone.h
@@ -20,4 +20,6 @@
 #define nid_to_addrbase(nid) 0
 #endif
 
+extern void setup_zero_pages(void);
+
 #endif /* _ASM_MMZONE_H_ */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/octeon/cvmx-bootinfo.h linux-libre-6.8-gnu/arch/mips/include/asm/octeon/cvmx-bootinfo.h
index c1c0b3230e0a..028bf1d6daee 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/octeon/cvmx-bootinfo.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/octeon/cvmx-bootinfo.h
@@ -114,7 +114,7 @@ struct cvmx_bootinfo {
 
 	/*
 	 * flags indicating various configuration options.  These
-	 * flags supercede the 'flags' variable and should be used
+	 * flags supersede the 'flags' variable and should be used
 	 * instead if available.
 	 */
 	uint32_t config_flags;
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/octeon/cvmx-cmd-queue.h linux-libre-6.8-gnu/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
index a07a36f7d814..67e1b2162b19 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
@@ -145,7 +145,7 @@ typedef struct {
 /**
  * This structure contains the global state of all command queues.
  * It is stored in a bootmem named block and shared by all
- * applications running on Octeon. Tickets are stored in a differnet
+ * applications running on Octeon. Tickets are stored in a different
  * cache line that queue information to reduce the contention on the
  * ll/sc used to get a ticket. If this is not the case, the update
  * of queue state causes the ll/sc to fail quite often.
@@ -172,7 +172,7 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id,
 						  int pool_size);
 
 /**
- * Shutdown a queue a free it's command buffers to the FPA. The
+ * Shutdown a queue and free its command buffers to the FPA. The
  * hardware connected to the queue must be stopped before this
  * function is called.
  *
@@ -194,7 +194,7 @@ int cvmx_cmd_queue_length(cvmx_cmd_queue_id_t queue_id);
 
 /**
  * Return the command buffer to be written to. The purpose of this
- * function is to allow CVMX routine access t othe low level buffer
+ * function is to allow CVMX routine access to the low level buffer
  * for initial hardware setup. User applications should not call this
  * function directly.
  *
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/octeon/cvmx-pko.h linux-libre-6.8-gnu/arch/mips/include/asm/octeon/cvmx-pko.h
index 5fec8476e421..f18a7f24daf8 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/octeon/cvmx-pko.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/octeon/cvmx-pko.h
@@ -91,7 +91,7 @@ typedef enum {
 } cvmx_pko_status_t;
 
 /**
- * This enumeration represents the differnet locking modes supported by PKO.
+ * This enumeration represents the different locking modes supported by PKO.
  */
 typedef enum {
 	/*
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/octeon/cvmx-pow.h linux-libre-6.8-gnu/arch/mips/include/asm/octeon/cvmx-pow.h
index a3b23811e0c3..21b4378244fa 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/octeon/cvmx-pow.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/octeon/cvmx-pow.h
@@ -1342,7 +1342,7 @@ static inline void cvmx_pow_tag_sw_wait(void)
  * This function does NOT wait for previous tag switches to complete,
  * so the caller must ensure that there is not a pending tag switch.
  *
- * @wait:   When set, call stalls until work becomes avaiable, or times out.
+ * @wait:   When set, call stalls until work becomes available, or times out.
  *		 If not set, returns immediately.
  *
  * Returns: the WQE pointer from POW. Returns NULL if no work
@@ -1376,7 +1376,7 @@ static inline struct cvmx_wqe *cvmx_pow_work_request_sync_nocheck(cvmx_pow_wait_
  * This function waits for any previous tag switch to complete before
  * requesting the new work.
  *
- * @wait:   When set, call stalls until work becomes avaiable, or times out.
+ * @wait:   When set, call stalls until work becomes available, or times out.
  *		 If not set, returns immediately.
  *
  * Returns: the WQE pointer from POW. Returns NULL if no work
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/octeon/octeon-model.h linux-libre-6.8-gnu/arch/mips/include/asm/octeon/octeon-model.h
index 6c68517c2770..e53b61a8e32f 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/octeon/octeon-model.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/octeon/octeon-model.h
@@ -54,7 +54,7 @@
 #define OM_CHECK_SUBMODEL	  0x02000000
 /* Match all models previous than the one specified */
 #define OM_MATCH_PREVIOUS_MODELS  0x04000000
-/* Ignores the minor revison on newer parts */
+/* Ignores the minor revision on newer parts */
 #define OM_IGNORE_MINOR_REVISION  0x08000000
 #define OM_FLAG_MASK		  0xff000000
 
@@ -226,7 +226,7 @@
 #define OCTEON_CN52XX_PASS2	OCTEON_CN52XX_PASS2_X
 
 /*
- * CN3XXX models with old revision enconding
+ * CN3XXX models with old revision encoding
  */
 #define OCTEON_CN38XX_PASS1	0x000d0000
 #define OCTEON_CN38XX_PASS2	0x000d0001
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/page.h linux-libre-6.8-gnu/arch/mips/include/asm/page.h
index 5978a8dfb917..ef9585d96f6b 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/page.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/page.h
@@ -173,7 +173,7 @@ static inline unsigned long ___pa(unsigned long x)
 	if (IS_ENABLED(CONFIG_64BIT)) {
 		/*
 		 * For MIPS64 the virtual address may either be in one of
-		 * the compatibility segements ckseg0 or ckseg1, or it may
+		 * the compatibility segments ckseg0 or ckseg1, or it may
 		 * be in xkphys.
 		 */
 		return x < CKSEG0 ? XPHYSADDR(x) : CPHYSADDR(x);
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/pci.h linux-libre-6.8-gnu/arch/mips/include/asm/pci.h
index 3fd6e22c108b..d993df6302dc 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/pci.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/pci.h
@@ -23,7 +23,7 @@
 #ifdef CONFIG_PCI_DRIVERS_LEGACY
 
 /*
- * Each pci channel is a top-level PCI bus seem by CPU.	 A machine  with
+ * Each PCI channel is a top-level PCI bus seem by CPU.	 A machine with
  * multiple PCI channels may have multiple PCI host controllers or a
  * single controller supporting multiple channels.
  */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/pgtable-bits.h linux-libre-6.8-gnu/arch/mips/include/asm/pgtable-bits.h
index 421e78c30253..088623ba7b8b 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/pgtable-bits.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/pgtable-bits.h
@@ -201,7 +201,7 @@ enum pgtable_bits {
  * The final layouts of the PTE bits are:
  *
  *   64-bit, R1 or earlier:     CCC D V G [S H] M A W R P
- *   32-bit, R1 or earler:      CCC D V G M A W R P
+ *   32-bit, R1 or earlier:     CCC D V G M A W R P
  *   64-bit, R2 or later:       CCC D V G RI/R XI [S H] M A W P
  *   32-bit, R2 or later:       CCC D V G RI/R XI M A W P
  */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/pgtable.h linux-libre-6.8-gnu/arch/mips/include/asm/pgtable.h
index 430b208c0130..e27a4c83c548 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/pgtable.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/pgtable.h
@@ -655,6 +655,7 @@ static inline pmd_t pmd_mkwrite_novma(pmd_t pmd)
 	return pmd;
 }
 
+#define pmd_dirty pmd_dirty
 static inline int pmd_dirty(pmd_t pmd)
 {
 	return !!(pmd_val(pmd) & _PAGE_MODIFIED);
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/processor.h linux-libre-6.8-gnu/arch/mips/include/asm/processor.h
index ae2cd37a38f0..ca7662cc65a7 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/processor.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/processor.h
@@ -402,4 +402,6 @@ extern int mips_set_process_fp_mode(struct task_struct *task,
 #define GET_FP_MODE(task)		mips_get_process_fp_mode(task)
 #define SET_FP_MODE(task,value)		mips_set_process_fp_mode(task, value)
 
+void show_registers(struct pt_regs *regs);
+
 #endif /* _ASM_PROCESSOR_H */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/ptrace.h linux-libre-6.8-gnu/arch/mips/include/asm/ptrace.h
index daf3cf244ea9..d14d0e37ad02 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/ptrace.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/ptrace.h
@@ -60,6 +60,7 @@ static inline void instruction_pointer_set(struct pt_regs *regs,
                                            unsigned long val)
 {
 	regs->cp0_epc = val;
+	regs->cp0_cause &= ~CAUSEF_BD;
 }
 
 /* Query offset/name of register from its name/offset */
@@ -154,6 +155,8 @@ static inline long regs_return_value(struct pt_regs *regs)
 }
 
 #define instruction_pointer(regs) ((regs)->cp0_epc)
+extern unsigned long exception_ip(struct pt_regs *regs);
+#define exception_ip(regs) exception_ip(regs)
 #define profile_pc(regs) instruction_pointer(regs)
 
 extern asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall);
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/r4kcache.h linux-libre-6.8-gnu/arch/mips/include/asm/r4kcache.h
index 431a1c9d53fc..da1cd1bbdbc5 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/r4kcache.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/r4kcache.h
@@ -24,6 +24,10 @@
 #include <asm/mmzone.h>
 #include <asm/unroll.h>
 
+extern void r5k_sc_init(void);
+extern void rm7k_sc_init(void);
+extern int mips_sc_init(void);
+
 extern void (*r4k_blast_dcache)(void);
 extern void (*r4k_blast_icache)(void);
 
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/setup.h linux-libre-6.8-gnu/arch/mips/include/asm/setup.h
index 8c56b862fd9c..4dce41138bad 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/setup.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/setup.h
@@ -27,5 +27,6 @@ extern unsigned long ebase;
 extern unsigned int hwrena;
 extern void per_cpu_trap_init(bool);
 extern void cpu_cache_init(void);
+extern void tlb_init(void);
 
 #endif /* __SETUP_H */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/sgi/mc.h linux-libre-6.8-gnu/arch/mips/include/asm/sgi/mc.h
index 3a070cec97e7..5e96f9d32624 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/sgi/mc.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/sgi/mc.h
@@ -96,7 +96,7 @@ struct sgimc_regs {
 	volatile u32 lbursttp;	/* Time period for long bursts */
 
 	/* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must
-	 * be the same size. The size encoding for supported SIMMs is bellow */
+	 * be the same size. The size encoding for supported SIMMs is below */
 	u32 _unused11[9];
 	volatile u32 mconfig0;	/* Memory config register zero */
 	u32 _unused12;
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/signal.h linux-libre-6.8-gnu/arch/mips/include/asm/signal.h
index 23d6b8015c79..8de81ccef7ad 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/signal.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/signal.h
@@ -31,5 +31,6 @@ extern struct mips_abi mips_abi_32;
 
 extern int protected_save_fp_context(void __user *sc);
 extern int protected_restore_fp_context(void __user *sc);
+void do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags);
 
 #endif /* _ASM_SIGNAL_H */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/smp-ops.h linux-libre-6.8-gnu/arch/mips/include/asm/smp-ops.h
index 0c59e168f800..1617b207723f 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/smp-ops.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/smp-ops.h
@@ -13,8 +13,6 @@
 
 #include <linux/errno.h>
 
-#include <asm/mips-cps.h>
-
 #ifdef CONFIG_SMP
 
 #include <linux/cpumask.h>
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/smp.h linux-libre-6.8-gnu/arch/mips/include/asm/smp.h
index 901bc61fa7ae..bc2c240f414b 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/smp.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/smp.h
@@ -11,13 +11,11 @@
 #ifndef __ASM_SMP_H
 #define __ASM_SMP_H
 
-#include <linux/bitops.h>
+#include <linux/compiler.h>
 #include <linux/linkage.h>
-#include <linux/smp.h>
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 
-#include <linux/atomic.h>
 #include <asm/smp-ops.h>
 
 extern int smp_num_siblings;
@@ -63,6 +61,8 @@ extern asmlinkage void smp_bootstrap(void);
 
 extern void calculate_cpu_foreign_map(void);
 
+asmlinkage void start_secondary(void);
+
 /*
  * this function sends a 'reschedule' IPI to another CPU.
  * it goes straight through and wastes no time serializing
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/sn/klconfig.h linux-libre-6.8-gnu/arch/mips/include/asm/sn/klconfig.h
index 117f85e4bef5..3d1670b3e052 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/sn/klconfig.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/sn/klconfig.h
@@ -851,7 +851,7 @@ typedef union kldev_s {	     /* for device structure allocation */
 /*
  * TBD - Allocation issues.
  *
- * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component,
+ * Do we need to Mark off separate heaps for lboard_t, rboard_t, component,
  * errinfo and allocate from them, or have a single heap and allocate all
  * structures from it. Debug is easier in the former method since we can
  * dump all similar structs in one command, but there will be lots of holes,
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/spram.h linux-libre-6.8-gnu/arch/mips/include/asm/spram.h
index 373f2a5d495d..9f6a2cb1943a 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/spram.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/spram.h
@@ -3,7 +3,7 @@
 #define _MIPS_SPRAM_H
 
 #if defined(CONFIG_MIPS_SPRAM)
-extern __init void spram_config(void);
+extern void spram_config(void);
 #else
 static inline void spram_config(void) { }
 #endif /* CONFIG_MIPS_SPRAM */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/sync.h linux-libre-6.8-gnu/arch/mips/include/asm/sync.h
index aabd097933fe..44c04a82d0b7 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/sync.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/sync.h
@@ -19,7 +19,7 @@
  *
  * Ordering barriers can be more efficient than completion barriers, since:
  *
- *   a) Ordering barriers only require memory access instructions which preceed
+ *   a) Ordering barriers only require memory access instructions which precede
  *      them in program order (older instructions) to reach a point in the
  *      load/store datapath beyond which reordering is not possible before
  *      allowing memory access instructions which follow them (younger
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/syscalls.h linux-libre-6.8-gnu/arch/mips/include/asm/syscalls.h
new file mode 100644
index 000000000000..59f9c0c9fa0a
--- /dev/null
+++ linux-libre-6.8-gnu/arch/mips/include/asm/syscalls.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASM_MIPS_SYSCALLS_H
+#define _ASM_MIPS_SYSCALLS_H
+
+#include <linux/linkage.h>
+#include <linux/compat.h>
+
+asmlinkage void sys_sigreturn(void);
+asmlinkage void sys_rt_sigreturn(void);
+asmlinkage int sysm_pipe(void);
+asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
+                                     unsigned long __user *user_mask_ptr);
+asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len,
+                                     unsigned long __user *user_mask_ptr);
+asmlinkage long sys32_fallocate(int fd, int mode, unsigned offset_a2,
+				unsigned offset_a3, unsigned len_a4,
+				unsigned len_a5);
+asmlinkage long sys32_fadvise64_64(int fd, int __pad,
+				   unsigned long a2, unsigned long a3,
+				   unsigned long a4, unsigned long a5,
+				   int flags);
+asmlinkage ssize_t sys32_readahead(int fd, u32 pad0, u64 a2, u64 a3,
+				   size_t count);
+asmlinkage long sys32_sync_file_range(int fd, int __pad,
+				      unsigned long a2, unsigned long a3,
+				      unsigned long a4, unsigned long a5,
+				      int flags);
+asmlinkage void sys32_rt_sigreturn(void);
+asmlinkage void sys32_sigreturn(void);
+asmlinkage int sys32_sigsuspend(compat_sigset_t __user *uset);
+asmlinkage void sysn32_rt_sigreturn(void);
+
+#endif
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/thread_info.h linux-libre-6.8-gnu/arch/mips/include/asm/thread_info.h
index ecae7470faa4..b9d76e8ac5a2 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/thread_info.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/thread_info.h
@@ -27,7 +27,7 @@ struct thread_info {
 	unsigned long		flags;		/* low level flags */
 	unsigned long		tp_value;	/* thread pointer */
 	__u32			cpu;		/* current CPU */
-	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	int			preempt_count;	/* 0 => preemptible, <0 => BUG */
 	struct pt_regs		*regs;
 	long			syscall;	/* syscall number */
 };
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/timex.h linux-libre-6.8-gnu/arch/mips/include/asm/timex.h
index 2e107886f97a..7ef06dcdc46e 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/timex.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/timex.h
@@ -46,7 +46,7 @@ typedef unsigned int cycles_t;
  *
  * There is a suggested workaround and also the erratum can't strike if
  * the compare interrupt isn't being used as the clock source device.
- * However for now the implementaton of this function doesn't get these
+ * However for now the implementation of this function doesn't get these
  * fine details right.
  */
 static inline int can_use_mips_counter(unsigned int prid)
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/tlbex.h linux-libre-6.8-gnu/arch/mips/include/asm/tlbex.h
index 6d97e23f30ab..24a2d06cc1c3 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/tlbex.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/tlbex.h
@@ -23,6 +23,7 @@ void build_update_entries(u32 **p, unsigned int tmp, unsigned int ptep);
 void build_tlb_write_entry(u32 **p, struct uasm_label **l,
 			   struct uasm_reloc **r,
 			   enum tlb_write_entry wmode);
+void build_tlb_refill_handler(void);
 
 extern void handle_tlbl(void);
 extern char handle_tlbl_end[];
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/traps.h linux-libre-6.8-gnu/arch/mips/include/asm/traps.h
index 15cde638b407..2a8a258730c9 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/traps.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/traps.h
@@ -39,4 +39,30 @@ extern char except_vec_nmi[];
 	register_nmi_notifier(&fn##_nb);				\
 })
 
+asmlinkage void do_ade(struct pt_regs *regs);
+asmlinkage void do_be(struct pt_regs *regs);
+asmlinkage void do_ov(struct pt_regs *regs);
+asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31);
+asmlinkage void do_bp(struct pt_regs *regs);
+asmlinkage void do_tr(struct pt_regs *regs);
+asmlinkage void do_ri(struct pt_regs *regs);
+asmlinkage void do_cpu(struct pt_regs *regs);
+asmlinkage void do_msa_fpe(struct pt_regs *regs, unsigned int msacsr);
+asmlinkage void do_msa(struct pt_regs *regs);
+asmlinkage void do_mdmx(struct pt_regs *regs);
+asmlinkage void do_watch(struct pt_regs *regs);
+asmlinkage void do_mcheck(struct pt_regs *regs);
+asmlinkage void do_mt(struct pt_regs *regs);
+asmlinkage void do_dsp(struct pt_regs *regs);
+asmlinkage void do_reserved(struct pt_regs *regs);
+asmlinkage void do_ftlb(void);
+asmlinkage void do_gsexc(struct pt_regs *regs, u32 diag1);
+asmlinkage void do_daddi_ov(struct pt_regs *regs);
+asmlinkage void do_page_fault(struct pt_regs *regs,
+	unsigned long write, unsigned long address);
+
+asmlinkage void cache_parity_error(void);
+asmlinkage void ejtag_exception_handler(struct pt_regs *regs);
+asmlinkage void __noreturn nmi_exception_handler(struct pt_regs *regs);
+
 #endif /* _ASM_TRAPS_H */
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/uasm.h linux-libre-6.8-gnu/arch/mips/include/asm/uasm.h
index 296bcf31abb5..b43bfd445252 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/uasm.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/uasm.h
@@ -193,9 +193,7 @@ struct uasm_label {
 
 void uasm_build_label(struct uasm_label **lab, u32 *addr,
 			int lid);
-#ifdef CONFIG_64BIT
 int uasm_in_compat_space_p(long addr);
-#endif
 int uasm_rel_hi(long val);
 int uasm_rel_lo(long val);
 void UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr);
diff --git linux-libre-6.7-gnu/arch/mips/include/asm/vdso/vdso.h linux-libre-6.8-gnu/arch/mips/include/asm/vdso/vdso.h
index a327ca21270e..6cd88191fefa 100644
--- linux-libre-6.7-gnu/arch/mips/include/asm/vdso/vdso.h
+++ linux-libre-6.8-gnu/arch/mips/include/asm/vdso/vdso.h
@@ -32,7 +32,7 @@ static inline unsigned long get_vdso_base(void)
 #else
 	/*
 	 * Get the base load address of the VDSO. We have to avoid generating
-	 * relocations and references to the GOT because ld.so does not peform
+	 * relocations and references to the GOT because ld.so does not perform
 	 * relocations on the VDSO. We use the current offset from the VDSO base
 	 * and perform a PC-relative branch which gives the absolute address in
 	 * ra, and take the difference. The assembler chokes on
diff --git linux-libre-6.7-gnu/arch/mips/include/uapi/asm/mman.h linux-libre-6.8-gnu/arch/mips/include/uapi/asm/mman.h
index c6e1fc77c996..9c48d9a21aa0 100644
--- linux-libre-6.7-gnu/arch/mips/include/uapi/asm/mman.h
+++ linux-libre-6.8-gnu/arch/mips/include/uapi/asm/mman.h
@@ -88,7 +88,7 @@
 #define MADV_HUGEPAGE	14		/* Worth backing with hugepages */
 #define MADV_NOHUGEPAGE 15		/* Not worth backing with hugepages */
 
-#define MADV_DONTDUMP	16		/* Explicity exclude from the core dump,
+#define MADV_DONTDUMP	16		/* Explicitly exclude from core dump,
 					   overrides the coredump filter bits */
 #define MADV_DODUMP	17		/* Clear the MADV_NODUMP flag */
 
diff --git linux-libre-6.7-gnu/arch/mips/include/uapi/asm/msgbuf.h linux-libre-6.8-gnu/arch/mips/include/uapi/asm/msgbuf.h
index 128af72f2dfe..d546642fc67e 100644
--- linux-libre-6.7-gnu/arch/mips/include/uapi/asm/msgbuf.h
+++ linux-libre-6.8-gnu/arch/mips/include/uapi/asm/msgbuf.h
@@ -62,7 +62,7 @@ struct msqid64_ds {
 	unsigned long  __unused5;
 };
 #else
-#warning no endianess set
+#warning no endianness set
 #endif
 
 #endif /* _ASM_MSGBUF_H */
diff --git linux-libre-6.7-gnu/arch/mips/kernel/cpu-probe.c linux-libre-6.8-gnu/arch/mips/kernel/cpu-probe.c
index b406d8bfb15a..bda7f193baab 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/cpu-probe.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/cpu-probe.c
@@ -179,7 +179,6 @@ void __init check_bugs32(void)
 static inline int cpu_has_confreg(void)
 {
 #ifdef CONFIG_CPU_R3000
-	extern unsigned long r3k_cache_size(unsigned long);
 	unsigned long size1, size2;
 	unsigned long cfg = read_c0_conf();
 
@@ -1139,7 +1138,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		 * This processor doesn't have an MMU, so it's not
 		 * "real easy" to run Linux on it. It is left purely
 		 * for documentation.  Commented out because it shares
-		 * it's c0_prid id number with the TX3900.
+		 * its c0_prid id number with the TX3900.
 		 */
 		c->cputype = CPU_R4650;
 		__cpu_name[cpu] = "R4650";
diff --git linux-libre-6.7-gnu/arch/mips/kernel/cpu-r3k-probe.c linux-libre-6.8-gnu/arch/mips/kernel/cpu-r3k-probe.c
index be93469c0e0e..0c826f729f75 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/cpu-r3k-probe.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/cpu-r3k-probe.c
@@ -42,7 +42,6 @@ void __init check_bugs32(void)
 static inline int cpu_has_confreg(void)
 {
 #ifdef CONFIG_CPU_R3000
-	extern unsigned long r3k_cache_size(unsigned long);
 	unsigned long size1, size2;
 	unsigned long cfg = read_c0_conf();
 
diff --git linux-libre-6.7-gnu/arch/mips/kernel/elf.c linux-libre-6.8-gnu/arch/mips/kernel/elf.c
index 5582a4ca1e9e..7aa2c2360ff6 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/elf.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/elf.c
@@ -11,6 +11,7 @@
 
 #include <asm/cpu-features.h>
 #include <asm/cpu-info.h>
+#include <asm/fpu.h>
 
 #ifdef CONFIG_MIPS_FP_SUPPORT
 
@@ -309,6 +310,11 @@ void mips_set_personality_nan(struct arch_elf_state *state)
 	struct cpuinfo_mips *c = &boot_cpu_data;
 	struct task_struct *t = current;
 
+	/* Do this early so t->thread.fpu.fcr31 won't be clobbered in case
+	 * we are preempted before the lose_fpu(0) in start_thread.
+	 */
+	lose_fpu(0);
+
 	t->thread.fpu.fcr31 = c->fpu_csr31;
 	switch (state->nan_2008) {
 	case 0:
diff --git linux-libre-6.7-gnu/arch/mips/kernel/genex.S linux-libre-6.8-gnu/arch/mips/kernel/genex.S
index b6de8e88c1bd..a572ce36a24f 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/genex.S
+++ linux-libre-6.8-gnu/arch/mips/kernel/genex.S
@@ -272,18 +272,17 @@ NESTED(except_vec_vi, 0, sp)
 	.set	push
 	.set	noreorder
 	PTR_LA	v1, except_vec_vi_handler
-FEXPORT(except_vec_vi_lui)
-	lui	v0, 0		/* Patched */
 	jr	v1
 FEXPORT(except_vec_vi_ori)
-	 ori	v0, 0		/* Patched */
+	 ori	v0, zero, 0		/* Offset in vi_handlers[] */
 	.set	pop
 	END(except_vec_vi)
 EXPORT(except_vec_vi_end)
 
 /*
  * Common Vectored Interrupt code
- * Complete the register saves and invoke the handler which is passed in $v0
+ * Complete the register saves and invoke the handler, $v0 holds
+ * offset into vi_handlers[]
  */
 NESTED(except_vec_vi_handler, 0, sp)
 	SAVE_TEMP
@@ -331,6 +330,7 @@ NESTED(except_vec_vi_handler, 0, sp)
 	/* Save task's sp on IRQ stack so that unwinding can follow it */
 	LONG_S	s1, 0(sp)
 2:
+	PTR_L	v0, vi_handlers(v0)
 	jalr	v0
 
 	/* Restore sp */
diff --git linux-libre-6.7-gnu/arch/mips/kernel/kprobes.c linux-libre-6.8-gnu/arch/mips/kernel/kprobes.c
index 316b27d0d2fb..dc39f5b3fb83 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/kprobes.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/kprobes.c
@@ -55,7 +55,7 @@ NOKPROBE_SYMBOL(insn_has_delayslot);
  * one; putting breakpoint on top of atomic ll/sc pair is bad idea;
  * so we need to prevent it and refuse kprobes insertion for such
  * instructions; cannot do much about breakpoint in the middle of
- * ll/sc pair; it is upto user to avoid those places
+ * ll/sc pair; it is up to user to avoid those places
  */
 static int insn_has_ll_or_sc(union mips_instruction insn)
 {
diff --git linux-libre-6.7-gnu/arch/mips/kernel/linux32.c linux-libre-6.8-gnu/arch/mips/kernel/linux32.c
index 6b61be486303..a0c0a7a654e9 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/linux32.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/linux32.c
@@ -42,6 +42,7 @@
 #include <linux/uaccess.h>
 #include <asm/mmu_context.h>
 #include <asm/mman.h>
+#include <asm/syscalls.h>
 
 #ifdef __MIPSEB__
 #define merge_64(r1, r2) ((((r1) & 0xffffffffUL) << 32) + ((r2) & 0xffffffffUL))
diff --git linux-libre-6.7-gnu/arch/mips/kernel/machine_kexec.c linux-libre-6.8-gnu/arch/mips/kernel/machine_kexec.c
index 432bfd3e7f22..4e3579bbd620 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/machine_kexec.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/machine_kexec.c
@@ -8,6 +8,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/libfdt.h>
+#include <linux/reboot.h>
 
 #include <asm/cacheflush.h>
 #include <asm/page.h>
diff --git linux-libre-6.7-gnu/arch/mips/kernel/mips-cm.c linux-libre-6.8-gnu/arch/mips/kernel/mips-cm.c
index 3f00788b0871..84b3affb9de8 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/mips-cm.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/mips-cm.c
@@ -201,7 +201,7 @@ phys_addr_t __mips_cm_phys_base(void)
 phys_addr_t mips_cm_phys_base(void)
 	__attribute__((weak, alias("__mips_cm_phys_base")));
 
-phys_addr_t __mips_cm_l2sync_phys_base(void)
+static phys_addr_t __mips_cm_l2sync_phys_base(void)
 {
 	u32 base_reg;
 
diff --git linux-libre-6.7-gnu/arch/mips/kernel/mips-mt-fpaff.c linux-libre-6.8-gnu/arch/mips/kernel/mips-mt-fpaff.c
index 67e130d3f038..10172fc4f627 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/mips-mt-fpaff.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/mips-mt-fpaff.c
@@ -15,6 +15,7 @@
 #include <linux/security.h>
 #include <linux/types.h>
 #include <linux/uaccess.h>
+#include <asm/syscalls.h>
 
 /*
  * CPU mask used to set process affinity for MT VPEs/TCs with FPUs
diff --git linux-libre-6.7-gnu/arch/mips/kernel/mips-mt.c linux-libre-6.8-gnu/arch/mips/kernel/mips-mt.c
index f88b7919f11f..c07d64438b5b 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/mips-mt.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/mips-mt.c
@@ -19,6 +19,7 @@
 #include <asm/mipsmtregs.h>
 #include <asm/r4kcache.h>
 #include <asm/cacheflush.h>
+#include <asm/mips_mt.h>
 
 int vpelimit;
 
diff --git linux-libre-6.7-gnu/arch/mips/kernel/module.c linux-libre-6.8-gnu/arch/mips/kernel/module.c
index 0c936cbf20c5..7b2fbaa9cac5 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/module.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/module.c
@@ -20,8 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/jump_label.h>
-
-extern void jump_label_apply_nops(struct module *mod);
+#include <asm/jump_label.h>
 
 struct mips_hi16 {
 	struct mips_hi16 *next;
diff --git linux-libre-6.7-gnu/arch/mips/kernel/prom.c linux-libre-6.8-gnu/arch/mips/kernel/prom.c
index f88ce78e13e3..6062e6fa589a 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/prom.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/prom.c
@@ -28,6 +28,8 @@ __init void mips_set_machine_name(const char *name)
 
 	strscpy(mips_machine_name, name, sizeof(mips_machine_name));
 	pr_info("MIPS: machine is %s\n", mips_get_machine_name());
+
+	dump_stack_set_arch_desc(name);
 }
 
 char *mips_get_machine_name(void)
diff --git linux-libre-6.7-gnu/arch/mips/kernel/ptrace.c linux-libre-6.8-gnu/arch/mips/kernel/ptrace.c
index d9df543f7e2c..59288c13b581 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/ptrace.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/ptrace.c
@@ -31,6 +31,7 @@
 #include <linux/seccomp.h>
 #include <linux/ftrace.h>
 
+#include <asm/branch.h>
 #include <asm/byteorder.h>
 #include <asm/cpu.h>
 #include <asm/cpu-info.h>
@@ -48,6 +49,12 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/syscalls.h>
 
+unsigned long exception_ip(struct pt_regs *regs)
+{
+	return exception_epc(regs);
+}
+EXPORT_SYMBOL(exception_ip);
+
 /*
  * Called by kernel/ptrace.c when detaching..
  *
diff --git linux-libre-6.7-gnu/arch/mips/kernel/r4k-bugs64.c linux-libre-6.8-gnu/arch/mips/kernel/r4k-bugs64.c
index 6ffefb2c6971..1e300330078d 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/r4k-bugs64.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/r4k-bugs64.c
@@ -14,6 +14,7 @@
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
 #include <asm/setup.h>
+#include <asm/traps.h>
 
 static char bug64hit[] __initdata =
 	"reliable operation impossible!\n%s";
diff --git linux-libre-6.7-gnu/arch/mips/kernel/relocate.c linux-libre-6.8-gnu/arch/mips/kernel/relocate.c
index 58fc8d089402..7eeeaf1ff95d 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/relocate.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/relocate.c
@@ -380,7 +380,7 @@ void *__init relocate_kernel(void)
 		}
 #endif /* CONFIG_USE_OF */
 
-		/* Copy the kernel to it's new location */
+		/* Copy the kernel to its new location */
 		memcpy(loc_new, &_text, kernel_length);
 
 		/* Perform relocations on the new kernel */
diff --git linux-libre-6.7-gnu/arch/mips/kernel/relocate_kernel.S linux-libre-6.8-gnu/arch/mips/kernel/relocate_kernel.S
index 8f0a7263a9d6..de894a0211d7 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/relocate_kernel.S
+++ linux-libre-6.8-gnu/arch/mips/kernel/relocate_kernel.S
@@ -70,7 +70,7 @@ copy_word:
 done:
 #ifdef CONFIG_SMP
 	/* kexec_flag reset is signal to other CPUs what kernel
-	   was moved to it's location. Note - we need relocated address
+	   was moved to its location. Note - we need relocated address
 	   of kexec_flag.  */
 
 	bal		1f
diff --git linux-libre-6.7-gnu/arch/mips/kernel/setup.c linux-libre-6.8-gnu/arch/mips/kernel/setup.c
index 2d2ca024bd47..9c30de151597 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/setup.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/setup.c
@@ -42,6 +42,7 @@
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/smp-ops.h>
+#include <asm/mips-cps.h>
 #include <asm/prom.h>
 #include <asm/fw/fw.h>
 
@@ -146,7 +147,7 @@ static unsigned long __init init_initrd(void)
 	/*
 	 * Board specific code or command line parser should have
 	 * already set up initrd_start and initrd_end. In these cases
-	 * perfom sanity checks and use them if all looks good.
+	 * perform sanity checks and use them if all looks good.
 	 */
 	if (!initrd_start || initrd_end <= initrd_start)
 		goto disable;
@@ -321,11 +322,11 @@ static void __init bootmem_init(void)
 		panic("Incorrect memory mapping !!!");
 
 	if (max_pfn > PFN_DOWN(HIGHMEM_START)) {
+		max_low_pfn = PFN_DOWN(HIGHMEM_START);
 #ifdef CONFIG_HIGHMEM
-		highstart_pfn = PFN_DOWN(HIGHMEM_START);
+		highstart_pfn = max_low_pfn;
 		highend_pfn = max_pfn;
 #else
-		max_low_pfn = PFN_DOWN(HIGHMEM_START);
 		max_pfn = max_low_pfn;
 #endif
 	}
diff --git linux-libre-6.7-gnu/arch/mips/kernel/signal-common.h linux-libre-6.8-gnu/arch/mips/kernel/signal-common.h
index f50d48435c68..136eb20ac024 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/signal-common.h
+++ linux-libre-6.8-gnu/arch/mips/kernel/signal-common.h
@@ -40,4 +40,7 @@ _restore_fp_context(void __user *fpregs, void __user *csr);
 extern asmlinkage int _save_msa_all_upper(void __user *buf);
 extern asmlinkage int _restore_msa_all_upper(void __user *buf);
 
+extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *);
+extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
+
 #endif	/* __SIGNAL_COMMON_H */
diff --git linux-libre-6.7-gnu/arch/mips/kernel/signal.c linux-libre-6.8-gnu/arch/mips/kernel/signal.c
index 479999b7f2de..4a10f18a8806 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/signal.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/signal.c
@@ -38,6 +38,7 @@
 #include <asm/dsp.h>
 #include <asm/inst.h>
 #include <asm/msa.h>
+#include <asm/syscalls.h>
 
 #include "signal-common.h"
 
@@ -569,7 +570,7 @@ void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
 		return (void __user __force *)(-1UL);
 
 	/*
-	 * FPU emulator may have it's own trampoline active just
+	 * FPU emulator may have its own trampoline active just
 	 * above the user stack, 16-bytes before the next lowest
 	 * 16 byte boundary.  Try to avoid trashing it.
 	 */
diff --git linux-libre-6.7-gnu/arch/mips/kernel/signal32.c linux-libre-6.8-gnu/arch/mips/kernel/signal32.c
index 59b8965433c2..73081d4ee8c1 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/signal32.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/signal32.c
@@ -18,6 +18,7 @@
 #include <asm/compat-signal.h>
 #include <linux/uaccess.h>
 #include <asm/unistd.h>
+#include <asm/syscalls.h>
 
 #include "signal-common.h"
 
diff --git linux-libre-6.7-gnu/arch/mips/kernel/signal_n32.c linux-libre-6.8-gnu/arch/mips/kernel/signal_n32.c
index cfc77b69420a..139d2596b0d4 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/signal_n32.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/signal_n32.c
@@ -24,6 +24,7 @@
 #include <asm/ucontext.h>
 #include <asm/fpu.h>
 #include <asm/cpu-features.h>
+#include <asm/syscalls.h>
 
 #include "signal-common.h"
 
@@ -32,9 +33,6 @@
  */
 #define __NR_N32_restart_syscall	6214
 
-extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *);
-extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
-
 struct ucontextn32 {
 	u32		    uc_flags;
 	s32		    uc_link;
diff --git linux-libre-6.7-gnu/arch/mips/kernel/signal_o32.c linux-libre-6.8-gnu/arch/mips/kernel/signal_o32.c
index 299a7a28ca33..4f0458459650 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/signal_o32.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/signal_o32.c
@@ -19,6 +19,7 @@
 #include <asm/dsp.h>
 #include <asm/sim.h>
 #include <asm/unistd.h>
+#include <asm/syscalls.h>
 
 #include "signal-common.h"
 
diff --git linux-libre-6.7-gnu/arch/mips/kernel/smp.c linux-libre-6.8-gnu/arch/mips/kernel/smp.c
index 82e2e051b416..0b53d35a116e 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/smp.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/smp.c
@@ -10,6 +10,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/profile.h>
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 #include <linux/threads.h>
@@ -468,11 +469,13 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	return 0;
 }
 
+#ifdef CONFIG_PROFILING
 /* Not really SMP stuff ... */
 int setup_profiling_timer(unsigned int multiplier)
 {
 	return 0;
 }
+#endif
 
 static void flush_tlb_all_ipi(void *info)
 {
diff --git linux-libre-6.7-gnu/arch/mips/kernel/spram.c linux-libre-6.8-gnu/arch/mips/kernel/spram.c
index d5d96214cce5..71c7e5e27567 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/spram.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/spram.c
@@ -12,6 +12,7 @@
 #include <asm/mipsregs.h>
 #include <asm/r4kcache.h>
 #include <asm/hazards.h>
+#include <asm/spram.h>
 
 /*
  * These definitions are correct for the 24K/34K/74K SPRAM sample
diff --git linux-libre-6.7-gnu/arch/mips/kernel/syscall.c linux-libre-6.8-gnu/arch/mips/kernel/syscall.c
index ae93a607ddf7..1bfc34a2e5b3 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/syscall.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/syscall.c
@@ -39,6 +39,7 @@
 #include <asm/shmparam.h>
 #include <asm/sync.h>
 #include <asm/sysmips.h>
+#include <asm/syscalls.h>
 #include <asm/switch_to.h>
 
 /*
diff --git linux-libre-6.7-gnu/arch/mips/kernel/syscalls/syscall_n32.tbl linux-libre-6.8-gnu/arch/mips/kernel/syscalls/syscall_n32.tbl
index a842b41c8e06..83cfc9eb6b88 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/syscalls/syscall_n32.tbl
+++ linux-libre-6.8-gnu/arch/mips/kernel/syscalls/syscall_n32.tbl
@@ -395,3 +395,8 @@
 454	n32	futex_wake			sys_futex_wake
 455	n32	futex_wait			sys_futex_wait
 456	n32	futex_requeue			sys_futex_requeue
+457	n32	statmount			sys_statmount
+458	n32	listmount			sys_listmount
+459	n32	lsm_get_self_attr		sys_lsm_get_self_attr
+460	n32	lsm_set_self_attr		sys_lsm_set_self_attr
+461	n32	lsm_list_modules		sys_lsm_list_modules
diff --git linux-libre-6.7-gnu/arch/mips/kernel/syscalls/syscall_n64.tbl linux-libre-6.8-gnu/arch/mips/kernel/syscalls/syscall_n64.tbl
index 116ff501bf92..532b855df589 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/syscalls/syscall_n64.tbl
+++ linux-libre-6.8-gnu/arch/mips/kernel/syscalls/syscall_n64.tbl
@@ -371,3 +371,8 @@
 454	n64	futex_wake			sys_futex_wake
 455	n64	futex_wait			sys_futex_wait
 456	n64	futex_requeue			sys_futex_requeue
+457	n64	statmount			sys_statmount
+458	n64	listmount			sys_listmount
+459	n64	lsm_get_self_attr		sys_lsm_get_self_attr
+460	n64	lsm_set_self_attr		sys_lsm_set_self_attr
+461	n64	lsm_list_modules		sys_lsm_list_modules
diff --git linux-libre-6.7-gnu/arch/mips/kernel/syscalls/syscall_o32.tbl linux-libre-6.8-gnu/arch/mips/kernel/syscalls/syscall_o32.tbl
index 525cc54bc63b..f45c9530ea93 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/syscalls/syscall_o32.tbl
+++ linux-libre-6.8-gnu/arch/mips/kernel/syscalls/syscall_o32.tbl
@@ -444,3 +444,8 @@
 454	o32	futex_wake			sys_futex_wake
 455	o32	futex_wait			sys_futex_wait
 456	o32	futex_requeue			sys_futex_requeue
+457	o32	statmount			sys_statmount
+458	o32	listmount			sys_listmount
+459	o32	lsm_get_self_attr		sys_lsm_get_self_attr
+460	o32	lsm_set_self_attr		sys_lsm_set_self_attr
+461	o32	lsm_list_modules		sys_lsm_list_modules
diff --git linux-libre-6.7-gnu/arch/mips/kernel/traps.c linux-libre-6.8-gnu/arch/mips/kernel/traps.c
index 246c6a6b0261..a1c1cb5de913 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/traps.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/traps.c
@@ -2007,7 +2007,13 @@ unsigned long vi_handlers[64];
 
 void reserve_exception_space(phys_addr_t addr, unsigned long size)
 {
-	memblock_reserve(addr, size);
+	/*
+	 * reserve exception space on CPUs other than CPU0
+	 * is too late, since memblock is unavailable when APs
+	 * up
+	 */
+	if (smp_processor_id() == 0)
+		memblock_reserve(addr, size);
 }
 
 void __init *set_except_vector(int n, void *addr)
@@ -2055,110 +2061,71 @@ static void do_default_vi(void)
 	panic("Caught unexpected vectored interrupt.");
 }
 
-static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
+void *set_vi_handler(int n, vi_handler_t addr)
 {
+	extern const u8 except_vec_vi[];
+	extern const u8 except_vec_vi_ori[], except_vec_vi_end[];
+	extern const u8 rollback_except_vec_vi[];
 	unsigned long handler;
 	unsigned long old_handler = vi_handlers[n];
 	int srssets = current_cpu_data.srsets;
 	u16 *h;
 	unsigned char *b;
+	const u8 *vec_start;
+	int ori_offset;
+	int handler_len;
 
 	BUG_ON(!cpu_has_veic && !cpu_has_vint);
 
 	if (addr == NULL) {
 		handler = (unsigned long) do_default_vi;
-		srs = 0;
 	} else
 		handler = (unsigned long) addr;
 	vi_handlers[n] = handler;
 
 	b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);
 
-	if (srs >= srssets)
-		panic("Shadow register set %d not supported", srs);
-
 	if (cpu_has_veic) {
 		if (board_bind_eic_interrupt)
-			board_bind_eic_interrupt(n, srs);
+			board_bind_eic_interrupt(n, 0);
 	} else if (cpu_has_vint) {
 		/* SRSMap is only defined if shadow sets are implemented */
 		if (srssets > 1)
-			change_c0_srsmap(0xf << n*4, srs << n*4);
+			change_c0_srsmap(0xf << n*4, 0 << n*4);
 	}
 
-	if (srs == 0) {
-		/*
-		 * If no shadow set is selected then use the default handler
-		 * that does normal register saving and standard interrupt exit
-		 */
-		extern const u8 except_vec_vi[], except_vec_vi_lui[];
-		extern const u8 except_vec_vi_ori[], except_vec_vi_end[];
-		extern const u8 rollback_except_vec_vi[];
-		const u8 *vec_start = using_rollback_handler() ?
-				      rollback_except_vec_vi : except_vec_vi;
+	vec_start = using_rollback_handler() ? rollback_except_vec_vi :
+					       except_vec_vi;
 #if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_BIG_ENDIAN)
-		const int lui_offset = except_vec_vi_lui - vec_start + 2;
-		const int ori_offset = except_vec_vi_ori - vec_start + 2;
+	ori_offset = except_vec_vi_ori - vec_start + 2;
 #else
-		const int lui_offset = except_vec_vi_lui - vec_start;
-		const int ori_offset = except_vec_vi_ori - vec_start;
+	ori_offset = except_vec_vi_ori - vec_start;
 #endif
-		const int handler_len = except_vec_vi_end - vec_start;
+	handler_len = except_vec_vi_end - vec_start;
 
-		if (handler_len > VECTORSPACING) {
-			/*
-			 * Sigh... panicing won't help as the console
-			 * is probably not configured :(
-			 */
-			panic("VECTORSPACING too small");
-		}
-
-		set_handler(((unsigned long)b - ebase), vec_start,
-#ifdef CONFIG_CPU_MICROMIPS
-				(handler_len - 1));
-#else
-				handler_len);
-#endif
-		h = (u16 *)(b + lui_offset);
-		*h = (handler >> 16) & 0xffff;
-		h = (u16 *)(b + ori_offset);
-		*h = (handler & 0xffff);
-		local_flush_icache_range((unsigned long)b,
-					 (unsigned long)(b+handler_len));
-	}
-	else {
+	if (handler_len > VECTORSPACING) {
 		/*
-		 * In other cases jump directly to the interrupt handler. It
-		 * is the handler's responsibility to save registers if required
-		 * (eg hi/lo) and return from the exception using "eret".
+		 * Sigh... panicing won't help as the console
+		 * is probably not configured :(
 		 */
-		u32 insn;
+		panic("VECTORSPACING too small");
+	}
 
-		h = (u16 *)b;
-		/* j handler */
+	set_handler(((unsigned long)b - ebase), vec_start,
 #ifdef CONFIG_CPU_MICROMIPS
-		insn = 0xd4000000 | (((u32)handler & 0x07ffffff) >> 1);
+			(handler_len - 1));
 #else
-		insn = 0x08000000 | (((u32)handler & 0x0fffffff) >> 2);
+			handler_len);
 #endif
-		h[0] = (insn >> 16) & 0xffff;
-		h[1] = insn & 0xffff;
-		h[2] = 0;
-		h[3] = 0;
-		local_flush_icache_range((unsigned long)b,
-					 (unsigned long)(b+8));
-	}
+	/* insert offset into vi_handlers[] */
+	h = (u16 *)(b + ori_offset);
+	*h = n * sizeof(handler);
+	local_flush_icache_range((unsigned long)b,
+				 (unsigned long)(b+handler_len));
 
 	return (void *)old_handler;
 }
 
-void *set_vi_handler(int n, vi_handler_t addr)
-{
-	return set_vi_srs_handler(n, addr, 0);
-}
-
-extern void tlb_init(void);
-
 /*
  * Timer interrupt
  */
@@ -2418,7 +2385,7 @@ void __init trap_init(void)
 		set_except_vector(i, handle_reserved);
 
 	/*
-	 * Copy the EJTAG debug exception vector handler code to it's final
+	 * Copy the EJTAG debug exception vector handler code to its final
 	 * destination.
 	 */
 	if (cpu_has_ejtag && board_ejtag_handler_setup)
diff --git linux-libre-6.7-gnu/arch/mips/kernel/unaligned.c linux-libre-6.8-gnu/arch/mips/kernel/unaligned.c
index f4cf94e92ec3..db652c99b72e 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/unaligned.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/unaligned.c
@@ -91,6 +91,7 @@
 #include <asm/inst.h>
 #include <asm/unaligned-emul.h>
 #include <asm/mmu_context.h>
+#include <asm/traps.h>
 #include <linux/uaccess.h>
 
 #include "access-helper.h"
diff --git linux-libre-6.7-gnu/arch/mips/kernel/vpe.c linux-libre-6.8-gnu/arch/mips/kernel/vpe.c
index e9a0cfd02ae2..737d0d4fdcd3 100644
--- linux-libre-6.7-gnu/arch/mips/kernel/vpe.c
+++ linux-libre-6.8-gnu/arch/mips/kernel/vpe.c
@@ -6,9 +6,9 @@
  * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
  * Copyright (C) 2013 Imagination Technologies Ltd.
  *
- * VPE spport module for loading a MIPS SP program into VPE1. The SP
+ * VPE support module for loading a MIPS SP program into VPE1. The SP
  * environment is rather simple since there are no TLBs. It needs
- * to be relocatable (or partiall linked). Initialize your stack in
+ * to be relocatable (or partially linked). Initialize your stack in
  * the startup-code. The loader looks for the symbol __start and sets
  * up the execution to resume from there. To load and run, simply do
  * a cat SP 'binary' to the /dev/vpe1 device.
diff --git linux-libre-6.7-gnu/arch/mips/kvm/Kconfig linux-libre-6.8-gnu/arch/mips/kvm/Kconfig
index a8cdba75f98d..18e7a17d5115 100644
--- linux-libre-6.7-gnu/arch/mips/kvm/Kconfig
+++ linux-libre-6.8-gnu/arch/mips/kvm/Kconfig
@@ -20,13 +20,11 @@ config KVM
 	depends on HAVE_KVM
 	depends on MIPS_FP_SUPPORT
 	select EXPORT_UASM
-	select PREEMPT_NOTIFIERS
+	select KVM_COMMON
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
-	select HAVE_KVM_EVENTFD
 	select HAVE_KVM_VCPU_ASYNC_IOCTL
 	select KVM_MMIO
-	select MMU_NOTIFIER
-	select INTERVAL_TREE
+	select KVM_GENERIC_MMU_NOTIFIER
 	select KVM_GENERIC_HARDWARE_ENABLING
 	help
 	  Support for hosting Guest kernels.
diff --git linux-libre-6.7-gnu/arch/mips/kvm/emulate.c linux-libre-6.8-gnu/arch/mips/kvm/emulate.c
index e64372b8f66a..0feec52222fb 100644
--- linux-libre-6.7-gnu/arch/mips/kvm/emulate.c
+++ linux-libre-6.8-gnu/arch/mips/kvm/emulate.c
@@ -531,7 +531,7 @@ static void kvm_mips_resume_hrtimer(struct kvm_vcpu *vcpu,
  * to be used for a period of time, but the exact ktime corresponding to the
  * final Count that must be restored is not known.
  *
- * It is gauranteed that a timer interrupt immediately after restore will be
+ * It is guaranteed that a timer interrupt immediately after restore will be
  * handled, but not if CP0_Compare is exactly at @count. That case should
  * already be handled when the hardware timer state is saved.
  *
diff --git linux-libre-6.7-gnu/arch/mips/lantiq/prom.c linux-libre-6.8-gnu/arch/mips/lantiq/prom.c
index a3cf29365858..0c45767eacf6 100644
--- linux-libre-6.7-gnu/arch/mips/lantiq/prom.c
+++ linux-libre-6.8-gnu/arch/mips/lantiq/prom.c
@@ -108,10 +108,9 @@ void __init prom_init(void)
 	prom_init_cmdline();
 
 #if defined(CONFIG_MIPS_MT_SMP)
-	if (cpu_has_mipsmt) {
-		lantiq_smp_ops = vsmp_smp_ops;
+	lantiq_smp_ops = vsmp_smp_ops;
+	if (cpu_has_mipsmt)
 		lantiq_smp_ops.init_secondary = lantiq_init_secondary;
-		register_smp_ops(&lantiq_smp_ops);
-	}
+	register_smp_ops(&lantiq_smp_ops);
 #endif
 }
diff --git linux-libre-6.7-gnu/arch/mips/loongson2ef/common/platform.c linux-libre-6.8-gnu/arch/mips/loongson2ef/common/platform.c
index 0084820cffaa..b10300a527af 100644
--- linux-libre-6.7-gnu/arch/mips/loongson2ef/common/platform.c
+++ linux-libre-6.8-gnu/arch/mips/loongson2ef/common/platform.c
@@ -17,7 +17,7 @@ static int __init loongson2_cpufreq_init(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
-	/* Only 2F revision and it's successors support CPUFreq */
+	/* Only 2F revision and its successors support CPUFreq */
 	if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F)
 		return platform_device_register(&loongson2_cpufreq_device);
 
diff --git linux-libre-6.7-gnu/arch/mips/loongson64/init.c linux-libre-6.8-gnu/arch/mips/loongson64/init.c
index f25caa6aa9d3..553142c1f14f 100644
--- linux-libre-6.7-gnu/arch/mips/loongson64/init.c
+++ linux-libre-6.8-gnu/arch/mips/loongson64/init.c
@@ -103,6 +103,9 @@ void __init szmem(unsigned int node)
 	if (loongson_sysconf.vgabios_addr)
 		memblock_reserve(virt_to_phys((void *)loongson_sysconf.vgabios_addr),
 				SZ_256K);
+	/* set nid for reserved memory */
+	memblock_set_node((u64)node << 44, (u64)(node + 1) << 44,
+			&memblock.reserved, node);
 }
 
 #ifndef CONFIG_NUMA
diff --git linux-libre-6.7-gnu/arch/mips/loongson64/numa.c linux-libre-6.8-gnu/arch/mips/loongson64/numa.c
index 8f61e93c0c5b..68dafd6d3e25 100644
--- linux-libre-6.7-gnu/arch/mips/loongson64/numa.c
+++ linux-libre-6.8-gnu/arch/mips/loongson64/numa.c
@@ -132,6 +132,8 @@ static void __init node_mem_init(unsigned int node)
 
 		/* Reserve pfn range 0~node[0]->node_start_pfn */
 		memblock_reserve(0, PAGE_SIZE * start_pfn);
+		/* set nid for reserved memory on node 0 */
+		memblock_set_node(0, 1ULL << 44, &memblock.reserved, 0);
 	}
 }
 
diff --git linux-libre-6.7-gnu/arch/mips/loongson64/smp.c linux-libre-6.8-gnu/arch/mips/loongson64/smp.c
index 498bdc1bb0ed..5a990cdef91a 100644
--- linux-libre-6.7-gnu/arch/mips/loongson64/smp.c
+++ linux-libre-6.8-gnu/arch/mips/loongson64/smp.c
@@ -516,7 +516,7 @@ static void __init loongson3_prepare_cpus(unsigned int max_cpus)
 }
 
 /*
- * Setup the PC, SP, and GP of a secondary processor and start it runing!
+ * Setup the PC, SP, and GP of a secondary processor and start it running!
  */
 static int loongson3_boot_secondary(int cpu, struct task_struct *idle)
 {
diff --git linux-libre-6.7-gnu/arch/mips/mm/c-r4k.c linux-libre-6.8-gnu/arch/mips/mm/c-r4k.c
index 187d1c16361c..10413b6f6662 100644
--- linux-libre-6.7-gnu/arch/mips/mm/c-r4k.c
+++ linux-libre-6.8-gnu/arch/mips/mm/c-r4k.c
@@ -1485,10 +1485,6 @@ static void loongson3_sc_init(void)
 	return;
 }
 
-extern int r5k_sc_init(void);
-extern int rm7k_sc_init(void);
-extern int mips_sc_init(void);
-
 static void setup_scache(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -1654,7 +1650,7 @@ static void coherency_setup(void)
 
 	/*
 	 * c0_status.cu=0 specifies that updates by the sc instruction use
-	 * the coherency mode specified by the TLB; 1 means cachable
+	 * the coherency mode specified by the TLB; 1 means cacheable
 	 * coherent update on write will be used.  Not all processors have
 	 * this bit and; some wire it to zero, others like Toshiba had the
 	 * silly idea of putting something else there ...
@@ -1828,7 +1824,7 @@ static struct notifier_block r4k_cache_pm_notifier_block = {
 	.notifier_call = r4k_cache_pm_notifier,
 };
 
-int __init r4k_cache_init_pm(void)
+static int __init r4k_cache_init_pm(void)
 {
 	return cpu_pm_register_notifier(&r4k_cache_pm_notifier_block);
 }
diff --git linux-libre-6.7-gnu/arch/mips/mm/cache.c linux-libre-6.8-gnu/arch/mips/mm/cache.c
index 7f830634dbe7..df1ced4fc3b5 100644
--- linux-libre-6.7-gnu/arch/mips/mm/cache.c
+++ linux-libre-6.8-gnu/arch/mips/mm/cache.c
@@ -205,22 +205,13 @@ static inline void setup_protection_map(void)
 
 void cpu_cache_init(void)
 {
-	if (cpu_has_3k_cache) {
-		extern void __weak r3k_cache_init(void);
-
+	if (IS_ENABLED(CONFIG_CPU_R3000) && cpu_has_3k_cache)
 		r3k_cache_init();
-	}
-	if (cpu_has_4k_cache) {
-		extern void __weak r4k_cache_init(void);
-
+	if (IS_ENABLED(CONFIG_CPU_R4K_CACHE_TLB) && cpu_has_4k_cache)
 		r4k_cache_init();
-	}
-
-	if (cpu_has_octeon_cache) {
-		extern void __weak octeon_cache_init(void);
 
+	if (IS_ENABLED(CONFIG_CPU_CAVIUM_OCTEON) && cpu_has_octeon_cache)
 		octeon_cache_init();
-	}
 
 	setup_protection_map();
 }
diff --git linux-libre-6.7-gnu/arch/mips/mm/cex-gen.S linux-libre-6.8-gnu/arch/mips/mm/cex-gen.S
index 45dff5cd4b8e..e528583d1331 100644
--- linux-libre-6.7-gnu/arch/mips/mm/cex-gen.S
+++ linux-libre-6.8-gnu/arch/mips/mm/cex-gen.S
@@ -25,7 +25,7 @@
 	 * This is a very bad place to be.  Our cache error
 	 * detection has triggered.  If we have write-back data
 	 * in the cache, we may not be able to recover.	 As a
-	 * first-order desperate measure, turn off KSEG0 cacheing.
+	 * first-order desperate measure, turn off KSEG0 caching.
 	 */
 	mfc0	k0,CP0_CONFIG
 	li	k1,~CONF_CM_CMASK
diff --git linux-libre-6.7-gnu/arch/mips/mm/dma-noncoherent.c linux-libre-6.8-gnu/arch/mips/mm/dma-noncoherent.c
index 3c4fc97b9f39..0f3cec663a12 100644
--- linux-libre-6.7-gnu/arch/mips/mm/dma-noncoherent.c
+++ linux-libre-6.8-gnu/arch/mips/mm/dma-noncoherent.c
@@ -138,7 +138,7 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
 
 #ifdef CONFIG_ARCH_HAS_SETUP_DMA_OPS
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-		const struct iommu_ops *iommu, bool coherent)
+		bool coherent)
 {
 	dev->dma_coherent = coherent;
 }
diff --git linux-libre-6.7-gnu/arch/mips/mm/fault.c linux-libre-6.8-gnu/arch/mips/mm/fault.c
index d7878208bd3f..aaa9a242ebba 100644
--- linux-libre-6.7-gnu/arch/mips/mm/fault.c
+++ linux-libre-6.8-gnu/arch/mips/mm/fault.c
@@ -26,6 +26,7 @@
 #include <asm/mmu_context.h>
 #include <asm/ptrace.h>
 #include <asm/highmem.h>		/* For VMALLOC_END */
+#include <asm/traps.h>
 #include <linux/kdebug.h>
 
 int show_unhandled_signals = 1;
diff --git linux-libre-6.7-gnu/arch/mips/mm/init.c linux-libre-6.8-gnu/arch/mips/mm/init.c
index 5dcb525a8995..39f129205b0c 100644
--- linux-libre-6.7-gnu/arch/mips/mm/init.c
+++ linux-libre-6.8-gnu/arch/mips/mm/init.c
@@ -38,6 +38,7 @@
 #include <asm/dma.h>
 #include <asm/maar.h>
 #include <asm/mmu_context.h>
+#include <asm/mmzone.h>
 #include <asm/sections.h>
 #include <asm/pgalloc.h>
 #include <asm/tlb.h>
@@ -421,8 +422,17 @@ void __init paging_init(void)
 		       " %ldk highmem ignored\n",
 		       (highend_pfn - max_low_pfn) << (PAGE_SHIFT - 10));
 		max_zone_pfns[ZONE_HIGHMEM] = max_low_pfn;
+
+		max_mapnr = max_low_pfn;
+	} else if (highend_pfn) {
+		max_mapnr = highend_pfn;
+	} else {
+		max_mapnr = max_low_pfn;
 	}
+#else
+	max_mapnr = max_low_pfn;
 #endif
+	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
 
 	free_area_init(max_zone_pfns);
 }
@@ -458,13 +468,6 @@ void __init mem_init(void)
 	 */
 	BUILD_BUG_ON(IS_ENABLED(CONFIG_32BIT) && (PFN_PTE_SHIFT > PAGE_SHIFT));
 
-#ifdef CONFIG_HIGHMEM
-	max_mapnr = highend_pfn ? highend_pfn : max_low_pfn;
-#else
-	max_mapnr = max_low_pfn;
-#endif
-	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
-
 	maar_init();
 	memblock_free_all();
 	setup_zero_pages();	/* Setup zeroed pages.  */
diff --git linux-libre-6.7-gnu/arch/mips/mm/ioremap.c linux-libre-6.8-gnu/arch/mips/mm/ioremap.c
index b6dad2fd5575..d8243d61ef32 100644
--- linux-libre-6.7-gnu/arch/mips/mm/ioremap.c
+++ linux-libre-6.8-gnu/arch/mips/mm/ioremap.c
@@ -72,6 +72,10 @@ void __iomem *ioremap_prot(phys_addr_t phys_addr, unsigned long size,
 	    flags == _CACHE_UNCACHED)
 		return (void __iomem *) CKSEG1ADDR(phys_addr);
 
+	/* Early remaps should use the unmapped regions til' VM is available */
+	if (WARN_ON_ONCE(!slab_is_available()))
+		return NULL;
+
 	/*
 	 * Don't allow anybody to remap RAM that may be allocated by the page
 	 * allocator, since that could lead to races & data clobbering.
diff --git linux-libre-6.7-gnu/arch/mips/mm/pgtable-64.c linux-libre-6.8-gnu/arch/mips/mm/pgtable-64.c
index c76d21f7dffb..1e544827dea9 100644
--- linux-libre-6.7-gnu/arch/mips/mm/pgtable-64.c
+++ linux-libre-6.8-gnu/arch/mips/mm/pgtable-64.c
@@ -89,6 +89,7 @@ void pud_init(void *addr)
 }
 #endif
 
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 pmd_t mk_pmd(struct page *page, pgprot_t prot)
 {
 	pmd_t pmd;
@@ -103,6 +104,7 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 {
 	*pmdp = pmd;
 }
+#endif
 
 void __init pagetable_init(void)
 {
diff --git linux-libre-6.7-gnu/arch/mips/mm/tlb-r3k.c linux-libre-6.8-gnu/arch/mips/mm/tlb-r3k.c
index 53dfa2b9316b..173f7b36033b 100644
--- linux-libre-6.7-gnu/arch/mips/mm/tlb-r3k.c
+++ linux-libre-6.8-gnu/arch/mips/mm/tlb-r3k.c
@@ -23,11 +23,11 @@
 #include <asm/io.h>
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
+#include <asm/setup.h>
+#include <asm/tlbex.h>
 
 #undef DEBUG_TLB
 
-extern void build_tlb_refill_handler(void);
-
 /* CP0 hazard avoidance. */
 #define BARRIER				\
 	__asm__ __volatile__(		\
@@ -183,7 +183,7 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 	int idx, pid;
 
 	/*
-	 * Handle debugger faulting in for debugee.
+	 * Handle debugger faulting in for debuggee.
 	 */
 	if (current->active_mm != vma->vm_mm)
 		return;
diff --git linux-libre-6.7-gnu/arch/mips/mm/tlb-r4k.c linux-libre-6.8-gnu/arch/mips/mm/tlb-r4k.c
index 93c2d695588a..4106084e57d7 100644
--- linux-libre-6.7-gnu/arch/mips/mm/tlb-r4k.c
+++ linux-libre-6.8-gnu/arch/mips/mm/tlb-r4k.c
@@ -22,9 +22,9 @@
 #include <asm/hazards.h>
 #include <asm/mmu_context.h>
 #include <asm/tlb.h>
+#include <asm/tlbex.h>
 #include <asm/tlbmisc.h>
-
-extern void build_tlb_refill_handler(void);
+#include <asm/setup.h>
 
 /*
  * LOONGSON-2 has a 4 entry itlb which is a subset of jtlb, LOONGSON-3 has
@@ -301,7 +301,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	int idx, pid;
 
 	/*
-	 * Handle debugger faulting in for debugee.
+	 * Handle debugger faulting in for debuggee.
 	 */
 	if (current->active_mm != vma->vm_mm)
 		return;
@@ -458,6 +458,7 @@ EXPORT_SYMBOL(has_transparent_hugepage);
 
 int temp_tlb_entry;
 
+#ifndef CONFIG_64BIT
 __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
 			       unsigned long entryhi, unsigned long pagemask)
 {
@@ -496,6 +497,7 @@ out:
 	local_irq_restore(flags);
 	return ret;
 }
+#endif
 
 static int ntlb;
 static int __init set_ntlb(char *str)
diff --git linux-libre-6.7-gnu/arch/mips/mm/tlbex.c linux-libre-6.8-gnu/arch/mips/mm/tlbex.c
index b4e1c783e617..4017fa0e2f68 100644
--- linux-libre-6.7-gnu/arch/mips/mm/tlbex.c
+++ linux-libre-6.8-gnu/arch/mips/mm/tlbex.c
@@ -789,7 +789,7 @@ void build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 
 	if (check_for_high_segbits) {
 		/*
-		 * The kernel currently implicitely assumes that the
+		 * The kernel currently implicitly assumes that the
 		 * MIPS SEGBITS parameter for the processor is
 		 * (PGDIR_SHIFT+PGDIR_BITS) or less, and will never
 		 * allocate virtual addresses outside the maximum
@@ -1715,7 +1715,7 @@ iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
 /*
  * Check if PTE is present, if not then jump to LABEL. PTR points to
  * the page table where this PTE is located, PTE will be re-loaded
- * with it's original value.
+ * with its original value.
  */
 static void
 build_pte_present(u32 **p, struct uasm_reloc **r,
diff --git linux-libre-6.7-gnu/arch/mips/net/bpf_jit_comp32.c linux-libre-6.8-gnu/arch/mips/net/bpf_jit_comp32.c
index ace5db3fbd17..40a878b672f5 100644
--- linux-libre-6.7-gnu/arch/mips/net/bpf_jit_comp32.c
+++ linux-libre-6.8-gnu/arch/mips/net/bpf_jit_comp32.c
@@ -95,7 +95,7 @@
 /*
  * Mapping of 64-bit eBPF registers to 32-bit native MIPS registers.
  *
- * 1) Native register pairs are ordered according to CPU endiannes, following
+ * 1) Native register pairs are ordered according to CPU endianness, following
  *    the MIPS convention for passing 64-bit arguments and return values.
  * 2) The eBPF return value, arguments and callee-saved registers are mapped
  *    to their native MIPS equivalents.
diff --git linux-libre-6.7-gnu/arch/mips/pci/ops-loongson2.c linux-libre-6.8-gnu/arch/mips/pci/ops-loongson2.c
index 0d1b36ba1c21..068113f5c49d 100644
--- linux-libre-6.7-gnu/arch/mips/pci/ops-loongson2.c
+++ linux-libre-6.8-gnu/arch/mips/pci/ops-loongson2.c
@@ -49,7 +49,7 @@ static int loongson_pcibios_config_access(unsigned char access_type,
 		 */
 #ifdef CONFIG_CS5536
 		/* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr() to
-		 * access the regsters PCI_MSR_ADDR, PCI_MSR_DATA_LO,
+		 * access the registers PCI_MSR_ADDR, PCI_MSR_DATA_LO,
 		 * PCI_MSR_DATA_HI, which is bigger than PCI_MSR_CTRL, so, it
 		 * will not go this branch, but the others. so, no calling dead
 		 * loop here.
diff --git linux-libre-6.7-gnu/arch/mips/pci/pci-alchemy.c linux-libre-6.8-gnu/arch/mips/pci/pci-alchemy.c
index 1c722dd0c130..58625d1b6465 100644
--- linux-libre-6.7-gnu/arch/mips/pci/pci-alchemy.c
+++ linux-libre-6.8-gnu/arch/mips/pci/pci-alchemy.c
@@ -453,7 +453,7 @@ static int alchemy_pci_probe(struct platform_device *pdev)
 
 	/* we can't ioremap the entire pci config space because it's too large,
 	 * nor can we dynamically ioremap it because some drivers use the
-	 * PCI config routines from within atomic contex and that becomes a
+	 * PCI config routines from within atomic context and that becomes a
 	 * problem in get_vm_area().  Instead we use one wired TLB entry to
 	 * handle all config accesses for all busses.
 	 */
diff --git linux-libre-6.7-gnu/arch/mips/pci/pci-ar2315.c linux-libre-6.8-gnu/arch/mips/pci/pci-ar2315.c
index e17d862cfa4c..a925842ee125 100644
--- linux-libre-6.7-gnu/arch/mips/pci/pci-ar2315.c
+++ linux-libre-6.8-gnu/arch/mips/pci/pci-ar2315.c
@@ -16,7 +16,7 @@
  * the CFG_SEL bit in the PCI_MISC_CONFIG register.
  *
  * Devices on the bus can perform DMA requests via chip BAR1. PCI host
- * controller BARs are programmend as if an external device is programmed.
+ * controller BARs are programmed as if an external device is programmed.
  * Which means that during configuration, IDSEL pin of the chip should be
  * asserted.
  *
diff --git linux-libre-6.7-gnu/arch/mips/pci/pci-ip27.c linux-libre-6.8-gnu/arch/mips/pci/pci-ip27.c
index d85cbf84e41c..973faea61cad 100644
--- linux-libre-6.7-gnu/arch/mips/pci/pci-ip27.c
+++ linux-libre-6.8-gnu/arch/mips/pci/pci-ip27.c
@@ -7,6 +7,9 @@
  * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
+
+#include <linux/io.h>
+
 #include <asm/sn/addrs.h>
 #include <asm/sn/types.h>
 #include <asm/sn/klconfig.h>
diff --git linux-libre-6.7-gnu/arch/mips/pci/pci-lantiq.c linux-libre-6.8-gnu/arch/mips/pci/pci-lantiq.c
index 80f7293166bb..68a8cefed420 100644
--- linux-libre-6.7-gnu/arch/mips/pci/pci-lantiq.c
+++ linux-libre-6.8-gnu/arch/mips/pci/pci-lantiq.c
@@ -152,7 +152,7 @@ static int ltq_pci_startup(struct platform_device *pdev)
 		temp_buffer &= ~0xf0000;
 	/* enable internal arbiter */
 	temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
-	/* enable internal PCI master reqest */
+	/* enable internal PCI master request */
 	temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
 
 	/* enable EBU request */
diff --git linux-libre-6.7-gnu/arch/mips/pci/pci-octeon.c linux-libre-6.8-gnu/arch/mips/pci/pci-octeon.c
index d19d9d456309..36d12cea3512 100644
--- linux-libre-6.7-gnu/arch/mips/pci/pci-octeon.c
+++ linux-libre-6.8-gnu/arch/mips/pci/pci-octeon.c
@@ -376,7 +376,7 @@ static void octeon_pci_initialize(void)
 	ctl_status.s.timer = 1;
 	cvmx_write_csr(CVMX_NPI_CTL_STATUS, ctl_status.u64);
 
-	/* Deassert PCI reset and advertize PCX Host Mode Device Capability
+	/* Deassert PCI reset and advertise PCX Host Mode Device Capability
 	   (64b) */
 	cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4);
 	cvmx_read_csr(CVMX_CIU_SOFT_PRST);
diff --git linux-libre-6.7-gnu/arch/mips/pci/pci-xtalk-bridge.c linux-libre-6.8-gnu/arch/mips/pci/pci-xtalk-bridge.c
index 68d5211afea8..45ddbaa6c123 100644
--- linux-libre-6.7-gnu/arch/mips/pci/pci-xtalk-bridge.c
+++ linux-libre-6.8-gnu/arch/mips/pci/pci-xtalk-bridge.c
@@ -114,7 +114,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
  *
  * The function is complicated by the ultimate brokenness of the IOC3 chip
  * which is used in SGI systems.  The IOC3 can only handle 32-bit PCI
- * accesses and does only decode parts of it's address space.
+ * accesses and does only decode parts of its address space.
  */
 static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
 				 int where, int size, u32 *value)
diff --git linux-libre-6.7-gnu/arch/mips/pci/pcie-octeon.c linux-libre-6.8-gnu/arch/mips/pci/pcie-octeon.c
index c9edd3fb380d..2583e318e8c6 100644
--- linux-libre-6.7-gnu/arch/mips/pci/pcie-octeon.c
+++ linux-libre-6.8-gnu/arch/mips/pci/pcie-octeon.c
@@ -1037,7 +1037,7 @@ retry:
 			in_fif_p_count = dbg_data.s.data & 0xff;
 		} while (in_fif_p_count != ((old_in_fif_p_count+1) & 0xff));
 
-		/* Update in_fif_p_count for it's offset with respect to out_p_count */
+		/* Update in_fif_p_count for its offset with respect to out_p_count */
 		in_fif_p_count = (in_fif_p_count + in_p_offset) & 0xff;
 
 		/* Read the OUT_P_COUNT from the debug select */
diff --git linux-libre-6.7-gnu/arch/mips/power/cpu.c linux-libre-6.8-gnu/arch/mips/power/cpu.c
index a15e29dfc7b3..d8ef7778e535 100644
--- linux-libre-6.7-gnu/arch/mips/power/cpu.c
+++ linux-libre-6.8-gnu/arch/mips/power/cpu.c
@@ -6,6 +6,7 @@
  * Author: Hu Hongbing <huhb@lemote.com>
  *	   Wu Zhangjin <wuzhangjin@gmail.com>
  */
+#include <linux/suspend.h>
 #include <asm/sections.h>
 #include <asm/fpu.h>
 #include <asm/dsp.h>
diff --git linux-libre-6.7-gnu/arch/mips/power/hibernate.c linux-libre-6.8-gnu/arch/mips/power/hibernate.c
index 94ab17c3c49d..192879e76c85 100644
--- linux-libre-6.7-gnu/arch/mips/power/hibernate.c
+++ linux-libre-6.8-gnu/arch/mips/power/hibernate.c
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <linux/suspend.h>
 #include <asm/tlbflush.h>
 
 extern int restore_image(void);
diff --git linux-libre-6.7-gnu/arch/mips/ralink/mt7621.c linux-libre-6.8-gnu/arch/mips/ralink/mt7621.c
index 137781d0bd0a..5a9fd3fe41d7 100644
--- linux-libre-6.7-gnu/arch/mips/ralink/mt7621.c
+++ linux-libre-6.8-gnu/arch/mips/ralink/mt7621.c
@@ -175,7 +175,7 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 		 * mips_cm_probe() wipes out bootloader
 		 * config for CM regions and we have to configure them
 		 * again. This SoC cannot talk to pamlbus devices
-		 * witout proper iocu region set up.
+		 * without proper iocu region set up.
 		 *
 		 * FIXME: it would be better to do this with values
 		 * from DT, but we need this very early because
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip27/Makefile linux-libre-6.8-gnu/arch/mips/sgi-ip27/Makefile
index 27c14ede191e..9877fcc512b1 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip27/Makefile
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip27/Makefile
@@ -5,7 +5,7 @@
 
 obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o \
 	   ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o ip27-timer.o \
-	   ip27-hubio.o ip27-xtalk.o
+	   ip27-xtalk.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= ip27-console.o
 obj-$(CONFIG_SMP)		+= ip27-smp.o
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip27/ip27-berr.c linux-libre-6.8-gnu/arch/mips/sgi-ip27/ip27-berr.c
index 923a63a51cda..9eb497cb5d52 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip27/ip27-berr.c
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip27/ip27-berr.c
@@ -22,6 +22,8 @@
 #include <asm/traps.h>
 #include <linux/uaccess.h>
 
+#include "ip27-common.h"
+
 static void dump_hub_information(unsigned long errst0, unsigned long errst1)
 {
 	static char *err_type[2][8] = {
@@ -57,7 +59,7 @@ static void dump_hub_information(unsigned long errst0, unsigned long errst1)
 	       [st0.pi_stat0_fmt.s0_err_type] ? : "invalid");
 }
 
-int ip27_be_handler(struct pt_regs *regs, int is_fixup)
+static int ip27_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	unsigned long errst0, errst1;
 	int data = regs->cp0_cause & 4;
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip27/ip27-common.h linux-libre-6.8-gnu/arch/mips/sgi-ip27/ip27-common.h
index ed008a08464c..a0059fa13934 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip27/ip27-common.h
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip27/ip27-common.h
@@ -10,6 +10,7 @@ extern void hub_rt_clock_event_init(void);
 extern void hub_rtc_init(nasid_t nasid);
 extern void install_cpu_nmi_handler(int slice);
 extern void install_ipi(void);
+extern void ip27_be_init(void);
 extern void ip27_reboot_setup(void);
 extern const struct plat_smp_ops ip27_smp_ops;
 extern unsigned long node_getfirstfree(nasid_t nasid);
@@ -17,4 +18,5 @@ extern void per_cpu_init(void);
 extern void replicate_kernel_text(void);
 extern void setup_replication_mask(void);
 
+
 #endif /* __IP27_COMMON_H */
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip27/ip27-hubio.c linux-libre-6.8-gnu/arch/mips/sgi-ip27/ip27-hubio.c
deleted file mode 100644
index 8352eb6403b4..000000000000
--- linux-libre-6.7-gnu/arch/mips/sgi-ip27/ip27-hubio.c
+++ /dev/null
@@ -1,185 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1992-1997, 2000-2003 Silicon Graphics, Inc.
- * Copyright (C) 2004 Christoph Hellwig.
- *
- * Support functions for the HUB ASIC - mostly PIO mapping related.
- */
-
-#include <linux/bitops.h>
-#include <linux/string.h>
-#include <linux/mmzone.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/agent.h>
-#include <asm/sn/io.h>
-#include <asm/xtalk/xtalk.h>
-
-
-static int force_fire_and_forget = 1;
-
-/**
- * hub_pio_map	-  establish a HUB PIO mapping
- *
- * @hub:	hub to perform PIO mapping on
- * @widget:	widget ID to perform PIO mapping for
- * @xtalk_addr: xtalk_address that needs to be mapped
- * @size:	size of the PIO mapping
- *
- **/
-unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget,
-			  unsigned long xtalk_addr, size_t size)
-{
-	unsigned i;
-
-	/* use small-window mapping if possible */
-	if ((xtalk_addr % SWIN_SIZE) + size <= SWIN_SIZE)
-		return NODE_SWIN_BASE(nasid, widget) + (xtalk_addr % SWIN_SIZE);
-
-	if ((xtalk_addr % BWIN_SIZE) + size > BWIN_SIZE) {
-		printk(KERN_WARNING "PIO mapping at hub %d widget %d addr 0x%lx"
-				" too big (%ld)\n",
-				nasid, widget, xtalk_addr, size);
-		return 0;
-	}
-
-	xtalk_addr &= ~(BWIN_SIZE-1);
-	for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) {
-		if (test_and_set_bit(i, hub_data(nasid)->h_bigwin_used))
-			continue;
-
-		/*
-		 * The code below does a PIO write to setup an ITTE entry.
-		 *
-		 * We need to prevent other CPUs from seeing our updated
-		 * memory shadow of the ITTE (in the piomap) until the ITTE
-		 * entry is actually set up; otherwise, another CPU might
-		 * attempt a PIO prematurely.
-		 *
-		 * Also, the only way we can know that an entry has been
-		 * received  by the hub and can be used by future PIO reads/
-		 * writes is by reading back the ITTE entry after writing it.
-		 *
-		 * For these two reasons, we PIO read back the ITTE entry
-		 * after we write it.
-		 */
-		IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr);
-		__raw_readq(IIO_ITTE_GET(nasid, i));
-
-		return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE);
-	}
-
-	printk(KERN_WARNING "unable to establish PIO mapping for at"
-			" hub %d widget %d addr 0x%lx\n",
-			nasid, widget, xtalk_addr);
-	return 0;
-}
-
-
-/*
- * hub_setup_prb(nasid, prbnum, credits, conveyor)
- *
- *	Put a PRB into fire-and-forget mode if conveyor isn't set.  Otherwise,
- *	put it into conveyor belt mode with the specified number of credits.
- */
-static void hub_setup_prb(nasid_t nasid, int prbnum, int credits)
-{
-	union iprb_u prb;
-	int prb_offset;
-
-	/*
-	 * Get the current register value.
-	 */
-	prb_offset = IIO_IOPRB(prbnum);
-	prb.iprb_regval = REMOTE_HUB_L(nasid, prb_offset);
-
-	/*
-	 * Clear out some fields.
-	 */
-	prb.iprb_ovflow = 1;
-	prb.iprb_bnakctr = 0;
-	prb.iprb_anakctr = 0;
-
-	/*
-	 * Enable or disable fire-and-forget mode.
-	 */
-	prb.iprb_ff = force_fire_and_forget ? 1 : 0;
-
-	/*
-	 * Set the appropriate number of PIO credits for the widget.
-	 */
-	prb.iprb_xtalkctr = credits;
-
-	/*
-	 * Store the new value to the register.
-	 */
-	REMOTE_HUB_S(nasid, prb_offset, prb.iprb_regval);
-}
-
-/**
- * hub_set_piomode  -  set pio mode for a given hub
- *
- * @nasid:	physical node ID for the hub in question
- *
- * Put the hub into either "PIO conveyor belt" mode or "fire-and-forget" mode.
- * To do this, we have to make absolutely sure that no PIOs are in progress
- * so we turn off access to all widgets for the duration of the function.
- *
- * XXX - This code should really check what kind of widget we're talking
- * to.	Bridges can only handle three requests, but XG will do more.
- * How many can crossbow handle to widget 0?  We're assuming 1.
- *
- * XXX - There is a bug in the crossbow that link reset PIOs do not
- * return write responses.  The easiest solution to this problem is to
- * leave widget 0 (xbow) in fire-and-forget mode at all times.	This
- * only affects pio's to xbow registers, which should be rare.
- **/
-static void hub_set_piomode(nasid_t nasid)
-{
-	u64 ii_iowa;
-	union hubii_wcr_u ii_wcr;
-	unsigned i;
-
-	ii_iowa = REMOTE_HUB_L(nasid, IIO_OUTWIDGET_ACCESS);
-	REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, 0);
-
-	ii_wcr.wcr_reg_value = REMOTE_HUB_L(nasid, IIO_WCR);
-
-	if (ii_wcr.iwcr_dir_con) {
-		/*
-		 * Assume a bridge here.
-		 */
-		hub_setup_prb(nasid, 0, 3);
-	} else {
-		/*
-		 * Assume a crossbow here.
-		 */
-		hub_setup_prb(nasid, 0, 1);
-	}
-
-	/*
-	 * XXX - Here's where we should take the widget type into
-	 * when account assigning credits.
-	 */
-	for (i = HUB_WIDGET_ID_MIN; i <= HUB_WIDGET_ID_MAX; i++)
-		hub_setup_prb(nasid, i, 3);
-
-	REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, ii_iowa);
-}
-
-/*
- * hub_pio_init	 -  PIO-related hub initialization
- *
- * @hub:	hubinfo structure for our hub
- */
-void hub_pio_init(nasid_t nasid)
-{
-	unsigned i;
-
-	/* initialize big window piomaps for this hub */
-	bitmap_zero(hub_data(nasid)->h_bigwin_used, HUB_NUM_BIG_WINDOW);
-	for (i = 0; i < HUB_NUM_BIG_WINDOW; i++)
-		IIO_ITTE_DISABLE(nasid, i);
-
-	hub_set_piomode(nasid);
-}
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip27/ip27-irq.c linux-libre-6.8-gnu/arch/mips/sgi-ip27/ip27-irq.c
index a0dd3bd2b81b..8f5299b269e7 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip27/ip27-irq.c
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip27/ip27-irq.c
@@ -23,6 +23,8 @@
 #include <asm/sn/intr.h>
 #include <asm/sn/irq_alloc.h>
 
+#include "ip27-common.h"
+
 struct hub_irq_data {
 	u64	*irq_mask[2];
 	cpuid_t	cpu;
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip27/ip27-memory.c linux-libre-6.8-gnu/arch/mips/sgi-ip27/ip27-memory.c
index f79c48393716..b8ca94cfb4fe 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip27/ip27-memory.c
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip27/ip27-memory.c
@@ -23,6 +23,7 @@
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/sections.h>
+#include <asm/sgialib.h>
 
 #include <asm/sn/arch.h>
 #include <asm/sn/agent.h>
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip27/ip27-nmi.c linux-libre-6.8-gnu/arch/mips/sgi-ip27/ip27-nmi.c
index 84889b57d5ff..fc2816398d0c 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip27/ip27-nmi.c
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip27/ip27-nmi.c
@@ -11,6 +11,8 @@
 #include <asm/sn/arch.h>
 #include <asm/sn/agent.h>
 
+#include "ip27-common.h"
+
 #if 0
 #define NODE_NUM_CPUS(n)	CNODE_NUM_CPUS(n)
 #else
@@ -23,16 +25,7 @@
 typedef unsigned long machreg_t;
 
 static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED;
-
-/*
- * Let's see what else we need to do here. Set up sp, gp?
- */
-void nmi_dump(void)
-{
-	void cont_nmi_dump(void);
-
-	cont_nmi_dump();
-}
+static void nmi_dump(void);
 
 void install_cpu_nmi_handler(int slice)
 {
@@ -53,7 +46,7 @@ void install_cpu_nmi_handler(int slice)
  * into the eframe format for the node under consideration.
  */
 
-void nmi_cpu_eframe_save(nasid_t nasid, int slice)
+static void nmi_cpu_eframe_save(nasid_t nasid, int slice)
 {
 	struct reg_struct *nr;
 	int		i;
@@ -129,7 +122,7 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice)
 	pr_emerg("\n");
 }
 
-void nmi_dump_hub_irq(nasid_t nasid, int slice)
+static void nmi_dump_hub_irq(nasid_t nasid, int slice)
 {
 	u64 mask0, mask1, pend0, pend1;
 
@@ -153,7 +146,7 @@ void nmi_dump_hub_irq(nasid_t nasid, int slice)
  * Copy the cpu registers which have been saved in the IP27prom format
  * into the eframe format for the node under consideration.
  */
-void nmi_node_eframe_save(nasid_t nasid)
+static void nmi_node_eframe_save(nasid_t nasid)
 {
 	int slice;
 
@@ -170,8 +163,7 @@ void nmi_node_eframe_save(nasid_t nasid)
 /*
  * Save the nmi cpu registers for all cpus in the system.
  */
-void
-nmi_eframes_save(void)
+static void nmi_eframes_save(void)
 {
 	nasid_t nasid;
 
@@ -179,8 +171,7 @@ nmi_eframes_save(void)
 		nmi_node_eframe_save(nasid);
 }
 
-void
-cont_nmi_dump(void)
+static void nmi_dump(void)
 {
 #ifndef REAL_NMI_SIGNAL
 	static atomic_t nmied_cpus = ATOMIC_INIT(0);
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip30/ip30-console.c linux-libre-6.8-gnu/arch/mips/sgi-ip30/ip30-console.c
index b91f8c4fdc78..7c6dcf6e73f7 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip30/ip30-console.c
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip30/ip30-console.c
@@ -3,6 +3,7 @@
 #include <linux/io.h>
 
 #include <asm/sn/ioc3.h>
+#include <asm/setup.h>
 
 static inline struct ioc3_uartregs *console_uart(void)
 {
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip30/ip30-setup.c linux-libre-6.8-gnu/arch/mips/sgi-ip30/ip30-setup.c
index 75a34684e704..e8547636a748 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip30/ip30-setup.c
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip30/ip30-setup.c
@@ -14,6 +14,7 @@
 #include <linux/percpu.h>
 #include <linux/memblock.h>
 
+#include <asm/bootinfo.h>
 #include <asm/smp-ops.h>
 #include <asm/sgialib.h>
 #include <asm/time.h>
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip32/crime.c linux-libre-6.8-gnu/arch/mips/sgi-ip32/crime.c
index a8e0c776ca6c..b8a0e4cfa9ce 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip32/crime.c
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip32/crime.c
@@ -18,6 +18,8 @@
 #include <asm/ip32/crime.h>
 #include <asm/ip32/mace.h>
 
+#include "ip32-common.h"
+
 struct sgi_crime __iomem *crime;
 struct sgi_mace __iomem *mace;
 
@@ -39,7 +41,7 @@ void __init crime_init(void)
 	       id, rev, field, (unsigned long) CRIME_BASE);
 }
 
-irqreturn_t crime_memerr_intr(unsigned int irq, void *dev_id)
+irqreturn_t crime_memerr_intr(int irq, void *dev_id)
 {
 	unsigned long stat, addr;
 	int fatal = 0;
@@ -90,7 +92,7 @@ irqreturn_t crime_memerr_intr(unsigned int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-irqreturn_t crime_cpuerr_intr(unsigned int irq, void *dev_id)
+irqreturn_t crime_cpuerr_intr(int irq, void *dev_id)
 {
 	unsigned long stat = crime->cpu_error_stat & CRIME_CPU_ERROR_MASK;
 	unsigned long addr = crime->cpu_error_addr & CRIME_CPU_ERROR_ADDR_MASK;
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip32/ip32-berr.c linux-libre-6.8-gnu/arch/mips/sgi-ip32/ip32-berr.c
index 478b63b4c808..7cbc27941f92 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip32/ip32-berr.c
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip32/ip32-berr.c
@@ -18,6 +18,8 @@
 #include <asm/ptrace.h>
 #include <asm/tlbdebug.h>
 
+#include "ip32-common.h"
+
 static int ip32_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	int data = regs->cp0_cause & 4;
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip32/ip32-common.h linux-libre-6.8-gnu/arch/mips/sgi-ip32/ip32-common.h
new file mode 100644
index 000000000000..cfc0225b1419
--- /dev/null
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip32/ip32-common.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __IP32_COMMON_H
+#define __IP32_COMMON_H
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+void __init crime_init(void);
+irqreturn_t crime_memerr_intr(int irq, void *dev_id);
+irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
+void __init ip32_be_init(void);
+void ip32_prepare_poweroff(void);
+
+#endif /* __IP32_COMMON_H */
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip32/ip32-irq.c linux-libre-6.8-gnu/arch/mips/sgi-ip32/ip32-irq.c
index e21ea1de05e3..29d04468a06b 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip32/ip32-irq.c
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip32/ip32-irq.c
@@ -28,6 +28,8 @@
 #include <asm/ip32/mace.h>
 #include <asm/ip32/ip32_ints.h>
 
+#include "ip32-common.h"
+
 /* issue a PIO read to make sure no PIO writes are pending */
 static inline void flush_crime_bus(void)
 {
@@ -107,10 +109,6 @@ static inline void flush_mace_bus(void)
  * is quite different anyway.
  */
 
-/* Some initial interrupts to set up */
-extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
-extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
-
 /*
  * This is for pure CRIME interrupts - ie not MACE.  The advantage?
  * We get to split the register in half and do faster lookups.
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip32/ip32-memory.c linux-libre-6.8-gnu/arch/mips/sgi-ip32/ip32-memory.c
index 3fc8d0a0bdfa..5fee33744f67 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip32/ip32-memory.c
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip32/ip32-memory.c
@@ -15,6 +15,7 @@
 #include <asm/ip32/crime.h>
 #include <asm/bootinfo.h>
 #include <asm/page.h>
+#include <asm/sgialib.h>
 
 extern void crime_init(void);
 
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip32/ip32-reset.c linux-libre-6.8-gnu/arch/mips/sgi-ip32/ip32-reset.c
index 18d1c115cd53..6bdc1421cda4 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip32/ip32-reset.c
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip32/ip32-reset.c
@@ -29,6 +29,8 @@
 #include <asm/ip32/crime.h>
 #include <asm/ip32/ip32_ints.h>
 
+#include "ip32-common.h"
+
 #define POWERDOWN_TIMEOUT	120
 /*
  * Blink frequency during reboot grace period and when panicked.
diff --git linux-libre-6.7-gnu/arch/mips/sgi-ip32/ip32-setup.c linux-libre-6.8-gnu/arch/mips/sgi-ip32/ip32-setup.c
index 8019dae1721a..aeb0805aae57 100644
--- linux-libre-6.7-gnu/arch/mips/sgi-ip32/ip32-setup.c
+++ linux-libre-6.8-gnu/arch/mips/sgi-ip32/ip32-setup.c
@@ -26,8 +26,7 @@
 #include <asm/ip32/mace.h>
 #include <asm/ip32/ip32_ints.h>
 
-extern void ip32_be_init(void);
-extern void crime_init(void);
+#include "ip32-common.h"
 
 #ifdef CONFIG_SGI_O2MACE_ETH
 /*
diff --git linux-libre-6.7-gnu/arch/mips/txx9/generic/pci.c linux-libre-6.8-gnu/arch/mips/txx9/generic/pci.c
index 5ae30b78d38d..d9249f5a632e 100644
--- linux-libre-6.7-gnu/arch/mips/txx9/generic/pci.c
+++ linux-libre-6.8-gnu/arch/mips/txx9/generic/pci.c
@@ -348,7 +348,7 @@ static void final_fixup(struct pci_dev *dev)
 	unsigned char bist;
 	int ret;
 
-	/* Do build-in self test */
+	/* Do built-in self test */
 	ret = pci_read_config_byte(dev, PCI_BIST, &bist);
 	if ((ret != PCIBIOS_SUCCESSFUL) || !(bist & PCI_BIST_CAPABLE))
 		return;
diff --git linux-libre-6.7-gnu/arch/mips/vdso/vgettimeofday.c linux-libre-6.8-gnu/arch/mips/vdso/vgettimeofday.c
index 6b83b6376a4b..604afea3f336 100644
--- linux-libre-6.7-gnu/arch/mips/vdso/vgettimeofday.c
+++ linux-libre-6.8-gnu/arch/mips/vdso/vgettimeofday.c
@@ -9,6 +9,7 @@
  */
 #include <linux/time.h>
 #include <linux/types.h>
+#include <vdso/gettime.h>
 
 #if _MIPS_SIM != _MIPS_SIM_ABI64
 int __vdso_clock_gettime(clockid_t clock,
diff --git linux-libre-6.7-gnu/arch/nios2/Kconfig linux-libre-6.8-gnu/arch/nios2/Kconfig
index d54464021a61..58d9565dc2c7 100644
--- linux-libre-6.7-gnu/arch/nios2/Kconfig
+++ linux-libre-6.8-gnu/arch/nios2/Kconfig
@@ -50,7 +50,7 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
diff --git linux-libre-6.7-gnu/arch/nios2/include/asm/cacheflush.h linux-libre-6.8-gnu/arch/nios2/include/asm/cacheflush.h
index 348cea097792..81484a776b33 100644
--- linux-libre-6.7-gnu/arch/nios2/include/asm/cacheflush.h
+++ linux-libre-6.8-gnu/arch/nios2/include/asm/cacheflush.h
@@ -38,6 +38,7 @@ void flush_icache_pages(struct vm_area_struct *vma, struct page *page,
 #define flush_icache_pages flush_icache_pages
 
 #define flush_cache_vmap(start, end)		flush_dcache_range(start, end)
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_dcache_range(start, end)
 
 extern void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
diff --git linux-libre-6.7-gnu/arch/nios2/include/asm/traps.h linux-libre-6.8-gnu/arch/nios2/include/asm/traps.h
index 82a48473280d..afd77bef01c6 100644
--- linux-libre-6.7-gnu/arch/nios2/include/asm/traps.h
+++ linux-libre-6.8-gnu/arch/nios2/include/asm/traps.h
@@ -14,6 +14,8 @@
 
 #ifndef __ASSEMBLY__
 void _exception(int signo, struct pt_regs *regs, int code, unsigned long addr);
+void do_page_fault(struct pt_regs *regs, unsigned long cause,
+		   unsigned long address);
 #endif
 
 #endif /* _ASM_NIOS2_TRAPS_H */
diff --git linux-libre-6.7-gnu/arch/parisc/Kconfig linux-libre-6.8-gnu/arch/parisc/Kconfig
index d14ccc948a29..5c845e8d59d9 100644
--- linux-libre-6.7-gnu/arch/parisc/Kconfig
+++ linux-libre-6.8-gnu/arch/parisc/Kconfig
@@ -25,7 +25,6 @@ config PARISC
 	select RTC_DRV_GENERIC
 	select INIT_ALL_POSSIBLE
 	select BUG
-	select BUILDTIME_TABLE_SORT
 	select HAVE_KERNEL_UNCOMPRESSED
 	select HAVE_PCI
 	select HAVE_PERF_EVENTS
diff --git linux-libre-6.7-gnu/arch/parisc/Makefile linux-libre-6.8-gnu/arch/parisc/Makefile
index 920db57b6b4c..316f84f1d15c 100644
--- linux-libre-6.7-gnu/arch/parisc/Makefile
+++ linux-libre-6.8-gnu/arch/parisc/Makefile
@@ -50,12 +50,12 @@ export CROSS32CC
 
 # Set default cross compiler for kernel build
 ifdef cross_compiling
-	ifeq ($(CROSS_COMPILE),)
+    ifeq ($(CROSS_COMPILE),)
 		CC_SUFFIXES = linux linux-gnu unknown-linux-gnu suse-linux
 		CROSS_COMPILE := $(call cc-cross-prefix, \
 			$(foreach a,$(CC_ARCHES), \
 			$(foreach s,$(CC_SUFFIXES),$(a)-$(s)-)))
-	endif
+    endif
 endif
 
 ifdef CONFIG_DYNAMIC_FTRACE
diff --git linux-libre-6.7-gnu/arch/parisc/include/asm/assembly.h linux-libre-6.8-gnu/arch/parisc/include/asm/assembly.h
index 74d17d7e759d..5937d5edaba1 100644
--- linux-libre-6.7-gnu/arch/parisc/include/asm/assembly.h
+++ linux-libre-6.8-gnu/arch/parisc/include/asm/assembly.h
@@ -576,6 +576,7 @@
 	.section __ex_table,"aw"			!	\
 	.align 4					!	\
 	.word (fault_addr - .), (except_addr - .)	!	\
+	or %r0,%r0,%r0					!	\
 	.previous
 
 
diff --git linux-libre-6.7-gnu/arch/parisc/include/asm/cacheflush.h linux-libre-6.8-gnu/arch/parisc/include/asm/cacheflush.h
index b4006f2a9705..ba4c05bc24d6 100644
--- linux-libre-6.7-gnu/arch/parisc/include/asm/cacheflush.h
+++ linux-libre-6.8-gnu/arch/parisc/include/asm/cacheflush.h
@@ -41,6 +41,7 @@ void flush_kernel_vmap_range(void *vaddr, int size);
 void invalidate_kernel_vmap_range(void *vaddr, int size);
 
 #define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
 void flush_dcache_folio(struct folio *folio);
diff --git linux-libre-6.7-gnu/arch/parisc/include/asm/extable.h linux-libre-6.8-gnu/arch/parisc/include/asm/extable.h
new file mode 100644
index 000000000000..4ea23e3d79dc
--- /dev/null
+++ linux-libre-6.8-gnu/arch/parisc/include/asm/extable.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PARISC_EXTABLE_H
+#define __PARISC_EXTABLE_H
+
+#include <asm/ptrace.h>
+#include <linux/compiler.h>
+
+/*
+ * The exception table consists of three addresses:
+ *
+ * - A relative address to the instruction that is allowed to fault.
+ * - A relative address at which the program should continue (fixup routine)
+ * - An asm statement which specifies which CPU register will
+ *   receive -EFAULT when an exception happens if the lowest bit in
+ *   the fixup address is set.
+ *
+ * Note: The register specified in the err_opcode instruction will be
+ * modified at runtime if a fault happens. Register %r0 will be ignored.
+ *
+ * Since relative addresses are used, 32bit values are sufficient even on
+ * 64bit kernel.
+ */
+
+struct pt_regs;
+int fixup_exception(struct pt_regs *regs);
+
+#define ARCH_HAS_RELATIVE_EXTABLE
+struct exception_table_entry {
+	int insn;	/* relative address of insn that is allowed to fault. */
+	int fixup;	/* relative address of fixup routine */
+	int err_opcode; /* sample opcode with register which holds error code */
+};
+
+#define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr, opcode )\
+	".section __ex_table,\"aw\"\n"			   \
+	".align 4\n"					   \
+	".word (" #fault_addr " - .), (" #except_addr " - .)\n" \
+	opcode "\n"					   \
+	".previous\n"
+
+/*
+ * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
+ * (with lowest bit set) for which the fault handler in fixup_exception() will
+ * load -EFAULT on fault into the register specified by the err_opcode instruction,
+ * and zeroes the target register in case of a read fault in get_user().
+ */
+#define ASM_EXCEPTIONTABLE_VAR(__err_var)		\
+	int __err_var = 0
+#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr, register )\
+	ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1, "or %%r0,%%r0," register)
+
+static inline void swap_ex_entry_fixup(struct exception_table_entry *a,
+				       struct exception_table_entry *b,
+				       struct exception_table_entry tmp,
+				       int delta)
+{
+	a->fixup = b->fixup + delta;
+	b->fixup = tmp.fixup - delta;
+	a->err_opcode = b->err_opcode;
+	b->err_opcode = tmp.err_opcode;
+}
+#define swap_ex_entry_fixup swap_ex_entry_fixup
+
+#endif
diff --git linux-libre-6.7-gnu/arch/parisc/include/asm/io.h linux-libre-6.8-gnu/arch/parisc/include/asm/io.h
index 366537042465..a63190af2f05 100644
--- linux-libre-6.7-gnu/arch/parisc/include/asm/io.h
+++ linux-libre-6.8-gnu/arch/parisc/include/asm/io.h
@@ -132,8 +132,6 @@ static inline void gsc_writeq(unsigned long long val, unsigned long addr)
 
 #define ioremap_wc(addr, size)  \
 	ioremap_prot((addr), (size), _PAGE_IOREMAP)
-#define ioremap_uc(addr, size)  \
-	ioremap_prot((addr), (size), _PAGE_IOREMAP)
 
 #define pci_iounmap			pci_iounmap
 
@@ -267,12 +265,6 @@ extern void iowrite64be(u64 val, void __iomem *addr);
 #define iowrite16_rep iowrite16_rep
 #define iowrite32_rep iowrite32_rep
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
 extern int devmem_is_allowed(unsigned long pfn);
 
 #include <asm-generic/io.h>
diff --git linux-libre-6.7-gnu/arch/parisc/include/asm/jump_label.h linux-libre-6.8-gnu/arch/parisc/include/asm/jump_label.h
index 94428798b6aa..317ebc5edc9f 100644
--- linux-libre-6.7-gnu/arch/parisc/include/asm/jump_label.h
+++ linux-libre-6.8-gnu/arch/parisc/include/asm/jump_label.h
@@ -12,7 +12,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 "nop\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".align %1\n\t"
@@ -29,7 +29,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 "b,n %l[l_yes]\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".align %1\n\t"
diff --git linux-libre-6.7-gnu/arch/parisc/include/asm/kprobes.h linux-libre-6.8-gnu/arch/parisc/include/asm/kprobes.h
index 0a175ac87698..0f42f5c8e3b6 100644
--- linux-libre-6.7-gnu/arch/parisc/include/asm/kprobes.h
+++ linux-libre-6.8-gnu/arch/parisc/include/asm/kprobes.h
@@ -10,9 +10,10 @@
 #ifndef _PARISC_KPROBES_H
 #define _PARISC_KPROBES_H
 
+#include <asm-generic/kprobes.h>
+
 #ifdef CONFIG_KPROBES
 
-#include <asm-generic/kprobes.h>
 #include <linux/types.h>
 #include <linux/ptrace.h>
 #include <linux/notifier.h>
diff --git linux-libre-6.7-gnu/arch/parisc/include/asm/special_insns.h linux-libre-6.8-gnu/arch/parisc/include/asm/special_insns.h
index c822bd0c0e3c..51f40eaf7780 100644
--- linux-libre-6.7-gnu/arch/parisc/include/asm/special_insns.h
+++ linux-libre-6.8-gnu/arch/parisc/include/asm/special_insns.h
@@ -8,7 +8,8 @@
 		"copy %%r0,%0\n"			\
 		"8:\tlpa %%r0(%1),%0\n"			\
 		"9:\n"					\
-		ASM_EXCEPTIONTABLE_ENTRY(8b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY(8b, 9b,	\
+				"or %%r0,%%r0,%%r0")	\
 		: "=&r" (pa)				\
 		: "r" (va)				\
 		: "memory"				\
@@ -22,7 +23,8 @@
 		"copy %%r0,%0\n"			\
 		"8:\tlpa %%r0(%%sr3,%1),%0\n"		\
 		"9:\n"					\
-		ASM_EXCEPTIONTABLE_ENTRY(8b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY(8b, 9b,	\
+				"or %%r0,%%r0,%%r0")	\
 		: "=&r" (pa)				\
 		: "r" (va)				\
 		: "memory"				\
diff --git linux-libre-6.7-gnu/arch/parisc/include/asm/uaccess.h linux-libre-6.8-gnu/arch/parisc/include/asm/uaccess.h
index 4165079898d9..88d0ae5769dd 100644
--- linux-libre-6.7-gnu/arch/parisc/include/asm/uaccess.h
+++ linux-libre-6.8-gnu/arch/parisc/include/asm/uaccess.h
@@ -7,6 +7,7 @@
  */
 #include <asm/page.h>
 #include <asm/cache.h>
+#include <asm/extable.h>
 
 #include <linux/bug.h>
 #include <linux/string.h>
@@ -26,37 +27,6 @@
 #define STD_USER(sr, x, ptr)	__put_user_asm(sr, "std", x, ptr)
 #endif
 
-/*
- * The exception table contains two values: the first is the relative offset to
- * the address of the instruction that is allowed to fault, and the second is
- * the relative offset to the address of the fixup routine. Since relative
- * addresses are used, 32bit values are sufficient even on 64bit kernel.
- */
-
-#define ARCH_HAS_RELATIVE_EXTABLE
-struct exception_table_entry {
-	int insn;	/* relative address of insn that is allowed to fault. */
-	int fixup;	/* relative address of fixup routine */
-};
-
-#define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\
-	".section __ex_table,\"aw\"\n"			   \
-	".align 4\n"					   \
-	".word (" #fault_addr " - .), (" #except_addr " - .)\n\t" \
-	".previous\n"
-
-/*
- * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
- * (with lowest bit set) for which the fault handler in fixup_exception() will
- * load -EFAULT into %r29 for a read or write fault, and zeroes the target
- * register in case of a read fault in get_user().
- */
-#define ASM_EXCEPTIONTABLE_REG	29
-#define ASM_EXCEPTIONTABLE_VAR(__variable)		\
-	register long __variable __asm__ ("r29") = 0
-#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr )\
-	ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1)
-
 #define __get_user_internal(sr, val, ptr)		\
 ({							\
 	ASM_EXCEPTIONTABLE_VAR(__gu_err);		\
@@ -83,7 +53,7 @@ struct exception_table_entry {
 							\
 	__asm__("1: " ldx " 0(%%sr%2,%3),%0\n"		\
 		"9:\n"					\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%1")	\
 		: "=r"(__gu_val), "+r"(__gu_err)        \
 		: "i"(sr), "r"(ptr));			\
 							\
@@ -115,8 +85,8 @@ struct exception_table_entry {
 		"1: ldw 0(%%sr%2,%3),%0\n"		\
 		"2: ldw 4(%%sr%2,%3),%R0\n"		\
 		"9:\n"					\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%1")	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b, "%1")	\
 		: "=&r"(__gu_tmp.l), "+r"(__gu_err)	\
 		: "i"(sr), "r"(ptr));			\
 							\
@@ -174,7 +144,7 @@ struct exception_table_entry {
 	__asm__ __volatile__ (					\
 		"1: " stx " %1,0(%%sr%2,%3)\n"			\
 		"9:\n"						\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)		\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%0")	\
 		: "+r"(__pu_err)				\
 		: "r"(x), "i"(sr), "r"(ptr))
 
@@ -186,15 +156,14 @@ struct exception_table_entry {
 		"1: stw %1,0(%%sr%2,%3)\n"			\
 		"2: stw %R1,4(%%sr%2,%3)\n"			\
 		"9:\n"						\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)		\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)		\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%0")	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b, "%0")	\
 		: "+r"(__pu_err)				\
 		: "r"(__val), "i"(sr), "r"(ptr));		\
 } while (0)
 
 #endif /* !defined(CONFIG_64BIT) */
 
-
 /*
  * Complex access routines -- external declarations
  */
@@ -216,7 +185,4 @@ unsigned long __must_check raw_copy_from_user(void *dst, const void __user *src,
 #define INLINE_COPY_TO_USER
 #define INLINE_COPY_FROM_USER
 
-struct pt_regs;
-int fixup_exception(struct pt_regs *regs);
-
 #endif /* __PARISC_UACCESS_H */
diff --git linux-libre-6.7-gnu/arch/parisc/kernel/cache.c linux-libre-6.8-gnu/arch/parisc/kernel/cache.c
index 268d90a9325b..422f3e1e6d9c 100644
--- linux-libre-6.7-gnu/arch/parisc/kernel/cache.c
+++ linux-libre-6.8-gnu/arch/parisc/kernel/cache.c
@@ -58,7 +58,7 @@ int pa_serialize_tlb_flushes __ro_after_init;
 
 struct pdc_cache_info cache_info __ro_after_init;
 #ifndef CONFIG_PA20
-struct pdc_btlb_info btlb_info __ro_after_init;
+struct pdc_btlb_info btlb_info;
 #endif
 
 DEFINE_STATIC_KEY_TRUE(parisc_has_cache);
@@ -264,6 +264,10 @@ parisc_cache_init(void)
 	icache_stride = CAFL_STRIDE(cache_info.ic_conf);
 #undef CAFL_STRIDE
 
+	/* stride needs to be non-zero, otherwise cache flushes will not work */
+	WARN_ON(cache_info.dc_size && dcache_stride == 0);
+	WARN_ON(cache_info.ic_size && icache_stride == 0);
+
 	if ((boot_cpu_data.pdc.capabilities & PDC_MODEL_NVA_MASK) ==
 						PDC_MODEL_NVA_UNSUPPORTED) {
 		printk(KERN_WARNING "parisc_cache_init: Only equivalent aliasing supported!\n");
@@ -850,7 +854,7 @@ SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
 #endif
 			"   fic,m	%3(%4,%0)\n"
 			"2: sync\n"
-			ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b)
+			ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b, "%1")
 			: "+r" (start), "+r" (error)
 			: "r" (end), "r" (dcache_stride), "i" (SR_USER));
 	}
@@ -865,7 +869,7 @@ SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
 #endif
 			"   fdc,m	%3(%4,%0)\n"
 			"2: sync\n"
-			ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b)
+			ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b, "%1")
 			: "+r" (start), "+r" (error)
 			: "r" (end), "r" (icache_stride), "i" (SR_USER));
 	}
diff --git linux-libre-6.7-gnu/arch/parisc/kernel/drivers.c linux-libre-6.8-gnu/arch/parisc/kernel/drivers.c
index 25f9b9e9d6df..c7ff339732ba 100644
--- linux-libre-6.7-gnu/arch/parisc/kernel/drivers.c
+++ linux-libre-6.8-gnu/arch/parisc/kernel/drivers.c
@@ -742,7 +742,7 @@ parse_tree_node(struct device *parent, int index, struct hardware_path *modpath)
 	};
 
 	if (device_for_each_child(parent, &recurse_data, descend_children))
-		{ /* nothing */ };
+		{ /* nothing */ }
 
 	return d.dev;
 }
@@ -1004,6 +1004,9 @@ static __init int qemu_print_iodc_data(struct device *lin_dev, void *data)
 
 	pr_info("\n");
 
+	/* Prevent hung task messages when printing on serial console */
+	cond_resched();
+
 	pr_info("#define HPA_%08lx_DESCRIPTION \"%s\"\n",
 		hpa, parisc_hardware_description(&dev->id));
 
diff --git linux-libre-6.7-gnu/arch/parisc/kernel/firmware.c linux-libre-6.8-gnu/arch/parisc/kernel/firmware.c
index 904ca3b9e7a7..c69f6d5946e9 100644
--- linux-libre-6.7-gnu/arch/parisc/kernel/firmware.c
+++ linux-libre-6.8-gnu/arch/parisc/kernel/firmware.c
@@ -123,10 +123,10 @@ static unsigned long f_extend(unsigned long address)
 #ifdef CONFIG_64BIT
 	if(unlikely(parisc_narrow_firmware)) {
 		if((address & 0xff000000) == 0xf0000000)
-			return 0xf0f0f0f000000000UL | (u32)address;
+			return (0xfffffff0UL << 32) | (u32)address;
 
 		if((address & 0xf0000000) == 0xf0000000)
-			return 0xffffffff00000000UL | (u32)address;
+			return (0xffffffffUL << 32) | (u32)address;
 	}
 #endif
 	return address;
diff --git linux-libre-6.7-gnu/arch/parisc/kernel/ftrace.c linux-libre-6.8-gnu/arch/parisc/kernel/ftrace.c
index d1defb9ede70..621a4b386ae4 100644
--- linux-libre-6.7-gnu/arch/parisc/kernel/ftrace.c
+++ linux-libre-6.8-gnu/arch/parisc/kernel/ftrace.c
@@ -78,7 +78,7 @@ asmlinkage void notrace __hot ftrace_function_trampoline(unsigned long parent,
 #endif
 }
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_FUNCTION_GRAPH_TRACER)
 int ftrace_enable_ftrace_graph_caller(void)
 {
 	static_key_enable(&ftrace_graph_enable.key);
diff --git linux-libre-6.7-gnu/arch/parisc/kernel/kexec_file.c linux-libre-6.8-gnu/arch/parisc/kernel/kexec_file.c
index 8c534204f0fd..3fc82130b6c3 100644
--- linux-libre-6.7-gnu/arch/parisc/kernel/kexec_file.c
+++ linux-libre-6.8-gnu/arch/parisc/kernel/kexec_file.c
@@ -38,8 +38,8 @@ static void *elf_load(struct kimage *image, char *kernel_buf,
 	for (i = 0; i < image->nr_segments; i++)
 		image->segment[i].mem = __pa(image->segment[i].mem);
 
-	pr_debug("Loaded the kernel at 0x%lx, entry at 0x%lx\n",
-		 kernel_load_addr, image->start);
+	kexec_dprintk("Loaded the kernel at 0x%lx, entry at 0x%lx\n",
+		      kernel_load_addr, image->start);
 
 	if (initrd != NULL) {
 		kbuf.buffer = initrd;
@@ -51,7 +51,7 @@ static void *elf_load(struct kimage *image, char *kernel_buf,
 		if (ret)
 			goto out;
 
-		pr_debug("Loaded initrd at 0x%lx\n", kbuf.mem);
+		kexec_dprintk("Loaded initrd at 0x%lx\n", kbuf.mem);
 		image->arch.initrd_start = kbuf.mem;
 		image->arch.initrd_end = kbuf.mem + initrd_len;
 	}
@@ -68,7 +68,7 @@ static void *elf_load(struct kimage *image, char *kernel_buf,
 		if (ret)
 			goto out;
 
-		pr_debug("Loaded cmdline at 0x%lx\n", kbuf.mem);
+		kexec_dprintk("Loaded cmdline at 0x%lx\n", kbuf.mem);
 		image->arch.cmdline = kbuf.mem;
 	}
 out:
diff --git linux-libre-6.7-gnu/arch/parisc/kernel/processor.c linux-libre-6.8-gnu/arch/parisc/kernel/processor.c
index e95a977ba5f3..bf73562706b2 100644
--- linux-libre-6.7-gnu/arch/parisc/kernel/processor.c
+++ linux-libre-6.8-gnu/arch/parisc/kernel/processor.c
@@ -172,7 +172,6 @@ static int __init processor_probe(struct parisc_device *dev)
 	p->cpu_num = cpu_info.cpu_num;
 	p->cpu_loc = cpu_info.cpu_loc;
 
-	set_cpu_possible(cpuid, true);
 	store_cpu_topology(cpuid);
 
 #ifdef CONFIG_SMP
@@ -474,13 +473,6 @@ static struct parisc_driver cpu_driver __refdata = {
  */
 void __init processor_init(void)
 {
-	unsigned int cpu;
-
 	reset_cpu_topology();
-
-	/* reset possible mask. We will mark those which are possible. */
-	for_each_possible_cpu(cpu)
-		set_cpu_possible(cpu, false);
-
 	register_parisc_driver(&cpu_driver);
 }
diff --git linux-libre-6.7-gnu/arch/parisc/kernel/syscalls/syscall.tbl linux-libre-6.8-gnu/arch/parisc/kernel/syscalls/syscall.tbl
index a47798fed54e..b236a84c4e12 100644
--- linux-libre-6.7-gnu/arch/parisc/kernel/syscalls/syscall.tbl
+++ linux-libre-6.8-gnu/arch/parisc/kernel/syscalls/syscall.tbl
@@ -455,3 +455,8 @@
 454	common	futex_wake			sys_futex_wake
 455	common	futex_wait			sys_futex_wait
 456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
diff --git linux-libre-6.7-gnu/arch/parisc/kernel/unaligned.c linux-libre-6.8-gnu/arch/parisc/kernel/unaligned.c
index ce25acfe4889..c520e551a165 100644
--- linux-libre-6.7-gnu/arch/parisc/kernel/unaligned.c
+++ linux-libre-6.8-gnu/arch/parisc/kernel/unaligned.c
@@ -120,8 +120,8 @@ static int emulate_ldh(struct pt_regs *regs, int toreg)
 "2:	ldbs	1(%%sr1,%3), %0\n"
 "	depw	%2, 23, 24, %0\n"
 "3:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%1")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%1")
 	: "+r" (val), "+r" (ret), "=&r" (temp1)
 	: "r" (saddr), "r" (regs->isr) );
 
@@ -152,8 +152,8 @@ static int emulate_ldw(struct pt_regs *regs, int toreg, int flop)
 "	mtctl	%2,11\n"
 "	vshd	%0,%3,%0\n"
 "3:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%1")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%1")
 	: "+r" (val), "+r" (ret), "=&r" (temp1), "=&r" (temp2)
 	: "r" (saddr), "r" (regs->isr) );
 
@@ -189,8 +189,8 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
 "	mtsar	%%r19\n"
 "	shrpd	%0,%%r20,%%sar,%0\n"
 "3:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%1")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%1")
 	: "=r" (val), "+r" (ret)
 	: "0" (val), "r" (saddr), "r" (regs->isr)
 	: "r19", "r20" );
@@ -209,9 +209,9 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
 "	vshd	%0,%R0,%0\n"
 "	vshd	%R0,%4,%R0\n"
 "4:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 4b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 4b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 4b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 4b, "%1")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 4b, "%1")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 4b, "%1")
 	: "+r" (val), "+r" (ret), "+r" (saddr), "=&r" (shift), "=&r" (temp1)
 	: "r" (regs->isr) );
     }
@@ -244,8 +244,8 @@ static int emulate_sth(struct pt_regs *regs, int frreg)
 "1:	stb %1, 0(%%sr1, %3)\n"
 "2:	stb %2, 1(%%sr1, %3)\n"
 "3:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%0")
 	: "+r" (ret), "=&r" (temp1)
 	: "r" (val), "r" (regs->ior), "r" (regs->isr) );
 
@@ -285,8 +285,8 @@ static int emulate_stw(struct pt_regs *regs, int frreg, int flop)
 "	stw	%%r20,0(%%sr1,%2)\n"
 "	stw	%%r21,4(%%sr1,%2)\n"
 "3:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%0")
 	: "+r" (ret)
 	: "r" (val), "r" (regs->ior), "r" (regs->isr)
 	: "r19", "r20", "r21", "r22", "r1" );
@@ -329,10 +329,10 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
 "3:	std	%%r20,0(%%sr1,%2)\n"
 "4:	std	%%r21,8(%%sr1,%2)\n"
 "5:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 5b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 5b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 5b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 5b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 5b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 5b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 5b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 5b, "%0")
 	: "+r" (ret)
 	: "r" (val), "r" (regs->ior), "r" (regs->isr)
 	: "r19", "r20", "r21", "r22", "r1" );
@@ -357,11 +357,11 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
 "4:	stw	%%r1,4(%%sr1,%2)\n"
 "5:	stw	%R1,8(%%sr1,%2)\n"
 "6:	\n"
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 6b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 6b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 6b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 6b)
-	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(5b, 6b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 6b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 6b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 6b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 6b, "%0")
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(5b, 6b, "%0")
 	: "+r" (ret)
 	: "r" (val), "r" (regs->ior), "r" (regs->isr)
 	: "r19", "r20", "r21", "r1" );
diff --git linux-libre-6.7-gnu/arch/parisc/kernel/unwind.c linux-libre-6.8-gnu/arch/parisc/kernel/unwind.c
index 27ae40a443b8..f7e0fee5ee55 100644
--- linux-libre-6.7-gnu/arch/parisc/kernel/unwind.c
+++ linux-libre-6.8-gnu/arch/parisc/kernel/unwind.c
@@ -228,10 +228,8 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
 #ifdef CONFIG_IRQSTACKS
 	extern void * const _call_on_stack;
 #endif /* CONFIG_IRQSTACKS */
-	void *ptr;
 
-	ptr = dereference_kernel_function_descriptor(&handle_interruption);
-	if (pc_is_kernel_fn(pc, ptr)) {
+	if (pc_is_kernel_fn(pc, handle_interruption)) {
 		struct pt_regs *regs = (struct pt_regs *)(info->sp - frame_size - PT_SZ_ALGN);
 		dbg("Unwinding through handle_interruption()\n");
 		info->prev_sp = regs->gr[30];
@@ -239,13 +237,13 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
 		return 1;
 	}
 
-	if (pc_is_kernel_fn(pc, ret_from_kernel_thread) ||
-	    pc_is_kernel_fn(pc, syscall_exit)) {
+	if (pc == (unsigned long)&ret_from_kernel_thread ||
+	    pc == (unsigned long)&syscall_exit) {
 		info->prev_sp = info->prev_ip = 0;
 		return 1;
 	}
 
-	if (pc_is_kernel_fn(pc, intr_return)) {
+	if (pc == (unsigned long)&intr_return) {
 		struct pt_regs *regs;
 
 		dbg("Found intr_return()\n");
@@ -257,14 +255,14 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
 	}
 
 	if (pc_is_kernel_fn(pc, _switch_to) ||
-	    pc_is_kernel_fn(pc, _switch_to_ret)) {
+	    pc == (unsigned long)&_switch_to_ret) {
 		info->prev_sp = info->sp - CALLEE_SAVE_FRAME_SIZE;
 		info->prev_ip = *(unsigned long *)(info->prev_sp - RP_OFFSET);
 		return 1;
 	}
 
 #ifdef CONFIG_IRQSTACKS
-	if (pc_is_kernel_fn(pc, _call_on_stack)) {
+	if (pc == (unsigned long)&_call_on_stack) {
 		info->prev_sp = *(unsigned long *)(info->sp - FRAME_SIZE - REG_SZ);
 		info->prev_ip = *(unsigned long *)(info->sp - FRAME_SIZE - RP_OFFSET);
 		return 1;
diff --git linux-libre-6.7-gnu/arch/parisc/kernel/vmlinux.lds.S linux-libre-6.8-gnu/arch/parisc/kernel/vmlinux.lds.S
index 548051b0b4af..b445e47903cf 100644
--- linux-libre-6.7-gnu/arch/parisc/kernel/vmlinux.lds.S
+++ linux-libre-6.8-gnu/arch/parisc/kernel/vmlinux.lds.S
@@ -127,7 +127,7 @@ SECTIONS
 	}
 #endif
 
-	RO_DATA(8)
+	RO_DATA(PAGE_SIZE)
 
 	/* unwind info */
 	. = ALIGN(4);
diff --git linux-libre-6.7-gnu/arch/parisc/mm/fault.c linux-libre-6.8-gnu/arch/parisc/mm/fault.c
index 2fe5b44986e0..c39de84e98b0 100644
--- linux-libre-6.7-gnu/arch/parisc/mm/fault.c
+++ linux-libre-6.8-gnu/arch/parisc/mm/fault.c
@@ -150,11 +150,16 @@ int fixup_exception(struct pt_regs *regs)
 		 * Fix up get_user() and put_user().
 		 * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() sets the least-significant
 		 * bit in the relative address of the fixup routine to indicate
-		 * that gr[ASM_EXCEPTIONTABLE_REG] should be loaded with
-		 * -EFAULT to report a userspace access error.
+		 * that the register encoded in the "or %r0,%r0,register"
+		 * opcode should be loaded with -EFAULT to report a userspace
+		 * access error.
 		 */
 		if (fix->fixup & 1) {
-			regs->gr[ASM_EXCEPTIONTABLE_REG] = -EFAULT;
+			int fault_error_reg = fix->err_opcode & 0x1f;
+			if (!WARN_ON(!fault_error_reg))
+				regs->gr[fault_error_reg] = -EFAULT;
+			pr_debug("Unalignment fixup of register %d at %pS\n",
+				fault_error_reg, (void*)regs->iaoq[0]);
 
 			/* zero target register for get_user() */
 			if (parisc_acctyp(0, regs->iir) == VM_READ) {
diff --git linux-libre-6.7-gnu/arch/parisc/mm/init.c linux-libre-6.8-gnu/arch/parisc/mm/init.c
index a2a3e89f2d9a..f876af56e13f 100644
--- linux-libre-6.7-gnu/arch/parisc/mm/init.c
+++ linux-libre-6.8-gnu/arch/parisc/mm/init.c
@@ -33,6 +33,7 @@
 #include <asm/msgbuf.h>
 #include <asm/sparsemem.h>
 #include <asm/asm-offsets.h>
+#include <asm/shmbuf.h>
 
 extern int  data_start;
 extern void parisc_kernel_start(void);	/* Kernel entry point in head.S */
diff --git linux-libre-6.7-gnu/arch/parisc/video/fbdev.c linux-libre-6.8-gnu/arch/parisc/video/fbdev.c
index 137561d98246..e4f8ac99fc9e 100644
--- linux-libre-6.7-gnu/arch/parisc/video/fbdev.c
+++ linux-libre-6.8-gnu/arch/parisc/video/fbdev.c
@@ -21,6 +21,6 @@ int fb_is_primary_device(struct fb_info *info)
 		return true;
 
 	/* return true if it's the default built-in framebuffer driver */
-	return (sti->info == info);
+	return (sti->dev == info->device);
 }
 EXPORT_SYMBOL(fb_is_primary_device);
diff --git linux-libre-6.7-gnu/arch/powerpc/Kconfig linux-libre-6.8-gnu/arch/powerpc/Kconfig
index 1f11a62809f2..b9fc064d38d2 100644
--- linux-libre-6.7-gnu/arch/powerpc/Kconfig
+++ linux-libre-6.8-gnu/arch/powerpc/Kconfig
@@ -189,6 +189,7 @@ config PPC
 	select EDAC_ATOMIC_SCRUB
 	select EDAC_SUPPORT
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY if ARCH_USING_PATCHABLE_FUNCTION_ENTRY
+	select FUNCTION_ALIGNMENT_4B
 	select GENERIC_ATOMIC64			if PPC32
 	select GENERIC_CLOCKEVENTS_BROADCAST	if SMP
 	select GENERIC_CMOS_UPDATE
@@ -858,6 +859,7 @@ config THREAD_SHIFT
 	int "Thread shift" if EXPERT
 	range 13 15
 	default "15" if PPC_256K_PAGES
+	default "15" if PPC_PSERIES || PPC_POWERNV
 	default "14" if PPC64
 	default "13"
 	help
@@ -915,7 +917,7 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
diff --git linux-libre-6.7-gnu/arch/powerpc/Kconfig.debug linux-libre-6.8-gnu/arch/powerpc/Kconfig.debug
index ea4033abc07d..8c80b154e814 100644
--- linux-libre-6.7-gnu/arch/powerpc/Kconfig.debug
+++ linux-libre-6.8-gnu/arch/powerpc/Kconfig.debug
@@ -271,7 +271,6 @@ config PPC_EARLY_DEBUG_USBGECKO
 config PPC_EARLY_DEBUG_PS3GELIC
 	bool "Early debugging through the PS3 Ethernet port"
 	depends on PPC_PS3
-	select PS3GELIC_UDBG
 	help
 	  Select this to enable early debugging for the PlayStation3 via
 	  UDP broadcasts sent out through the Ethernet port.
diff --git linux-libre-6.7-gnu/arch/powerpc/Makefile linux-libre-6.8-gnu/arch/powerpc/Makefile
index f19dbaa1d541..051247027da0 100644
--- linux-libre-6.7-gnu/arch/powerpc/Makefile
+++ linux-libre-6.8-gnu/arch/powerpc/Makefile
@@ -10,15 +10,26 @@
 # Rewritten by Cort Dougan and Paul Mackerras
 #
 
+ifdef cross_compiling
+  ifeq ($(CROSS_COMPILE),)
+    # Auto detect cross compiler prefix.
+    # Look for: (powerpc(64(le)?)?)(-unknown)?-linux(-gnu)?-
+    CC_ARCHES := powerpc powerpc64 powerpc64le
+    CC_SUFFIXES := linux linux-gnu unknown-linux-gnu
+    CROSS_COMPILE := $(call cc-cross-prefix, $(foreach a,$(CC_ARCHES), \
+                       $(foreach s,$(CC_SUFFIXES),$(a)-$(s)-)))
+  endif
+endif
+
 HAS_BIARCH	:= $(call cc-option-yn, -m32)
 
 # Set default 32 bits cross compilers for vdso and boot wrapper
 CROSS32_COMPILE ?=
 
 # If we're on a ppc/ppc64/ppc64le machine use that defconfig, otherwise just use
-# ppc64_defconfig because we have nothing better to go on.
+# ppc64le_defconfig because we have nothing better to go on.
 uname := $(shell uname -m)
-KBUILD_DEFCONFIG := $(if $(filter ppc%,$(uname)),$(uname),ppc64)_defconfig
+KBUILD_DEFCONFIG := $(if $(filter ppc%,$(uname)),$(uname),ppc64le)_defconfig
 
 new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
 
@@ -161,7 +172,7 @@ CFLAGS-y += $(CONFIG_TUNE_CPU)
 
 asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
 
-KBUILD_CPPFLAGS	+= -I $(srctree)/arch/$(ARCH) $(asinstr)
+KBUILD_CPPFLAGS	+= -I $(srctree)/arch/powerpc $(asinstr)
 KBUILD_AFLAGS	+= $(AFLAGS-y)
 KBUILD_CFLAGS	+= $(call cc-option,-msoft-float)
 KBUILD_CFLAGS	+= $(CFLAGS-y)
@@ -232,7 +243,7 @@ BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.%
 
 PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
 
-boot := arch/$(ARCH)/boot
+boot := arch/powerpc/boot
 
 $(BOOT_TARGETS1): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
@@ -336,7 +347,7 @@ PHONY += $(generated_configs)
 
 define archhelp
   echo '* zImage          - Build default images selected by kernel config'
-  echo '  zImage.*        - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
+  echo '  zImage.*        - Compressed kernel image (arch/powerpc/boot/zImage.*)'
   echo '  uImage          - U-Boot native image format'
   echo '  cuImage.<dt>    - Backwards compatible U-Boot image for older'
   echo '                    versions which do not support device trees'
@@ -347,12 +358,12 @@ define archhelp
   echo '                    (your) ~/bin/$(INSTALLKERNEL) or'
   echo '                    (distribution) /sbin/$(INSTALLKERNEL) or'
   echo '                    install to $$(INSTALL_PATH) and run lilo'
-  echo '  *_defconfig     - Select default config from arch/$(ARCH)/configs'
+  echo '  *_defconfig     - Select default config from arch/powerpc/configs'
   echo ''
   echo '  Targets with <dt> embed a device tree blob inside the image'
   echo '  These targets support board with firmware that does not'
   echo '  support passing a device tree directly.  Replace <dt> with the'
-  echo '  name of a dts file from the arch/$(ARCH)/boot/dts/ directory'
+  echo '  name of a dts file from the arch/powerpc/boot/dts/ directory'
   echo '  (minus the .dts extension).'
   echo
   $(foreach cfg,$(generated_configs),
diff --git linux-libre-6.7-gnu/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi linux-libre-6.8-gnu/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index d552044c5afc..aa5152ca8120 100644
--- linux-libre-6.7-gnu/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ linux-libre-6.8-gnu/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -367,45 +367,46 @@
 		reg = <0xf0000 0x1000>;
 		interrupts = <18 2 0 0>;
 		fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
-		fsl,tmu-calibration = <0x00000000 0x0000000f
-				       0x00000001 0x00000017
-				       0x00000002 0x0000001e
-				       0x00000003 0x00000026
-				       0x00000004 0x0000002e
-				       0x00000005 0x00000035
-				       0x00000006 0x0000003d
-				       0x00000007 0x00000044
-				       0x00000008 0x0000004c
-				       0x00000009 0x00000053
-				       0x0000000a 0x0000005b
-				       0x0000000b 0x00000064
-
-				       0x00010000 0x00000011
-				       0x00010001 0x0000001c
-				       0x00010002 0x00000024
-				       0x00010003 0x0000002b
-				       0x00010004 0x00000034
-				       0x00010005 0x00000039
-				       0x00010006 0x00000042
-				       0x00010007 0x0000004c
-				       0x00010008 0x00000051
-				       0x00010009 0x0000005a
-				       0x0001000a 0x00000063
-
-				       0x00020000 0x00000013
-				       0x00020001 0x00000019
-				       0x00020002 0x00000024
-				       0x00020003 0x0000002c
-				       0x00020004 0x00000035
-				       0x00020005 0x0000003d
-				       0x00020006 0x00000046
-				       0x00020007 0x00000050
-				       0x00020008 0x00000059
-
-				       0x00030000 0x00000002
-				       0x00030001 0x0000000d
-				       0x00030002 0x00000019
-				       0x00030003 0x00000024>;
+		fsl,tmu-calibration =
+				<0x00000000 0x0000000f>,
+				<0x00000001 0x00000017>,
+				<0x00000002 0x0000001e>,
+				<0x00000003 0x00000026>,
+				<0x00000004 0x0000002e>,
+				<0x00000005 0x00000035>,
+				<0x00000006 0x0000003d>,
+				<0x00000007 0x00000044>,
+				<0x00000008 0x0000004c>,
+				<0x00000009 0x00000053>,
+				<0x0000000a 0x0000005b>,
+				<0x0000000b 0x00000064>,
+
+				<0x00010000 0x00000011>,
+				<0x00010001 0x0000001c>,
+				<0x00010002 0x00000024>,
+				<0x00010003 0x0000002b>,
+				<0x00010004 0x00000034>,
+				<0x00010005 0x00000039>,
+				<0x00010006 0x00000042>,
+				<0x00010007 0x0000004c>,
+				<0x00010008 0x00000051>,
+				<0x00010009 0x0000005a>,
+				<0x0001000a 0x00000063>,
+
+				<0x00020000 0x00000013>,
+				<0x00020001 0x00000019>,
+				<0x00020002 0x00000024>,
+				<0x00020003 0x0000002c>,
+				<0x00020004 0x00000035>,
+				<0x00020005 0x0000003d>,
+				<0x00020006 0x00000046>,
+				<0x00020007 0x00000050>,
+				<0x00020008 0x00000059>,
+
+				<0x00030000 0x00000002>,
+				<0x00030001 0x0000000d>,
+				<0x00030002 0x00000019>,
+				<0x00030003 0x00000024>;
 		#thermal-sensor-cells = <1>;
 	};
 
diff --git linux-libre-6.7-gnu/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi linux-libre-6.8-gnu/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index ad0ab33336b8..776788623204 100644
--- linux-libre-6.7-gnu/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ linux-libre-6.8-gnu/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -447,41 +447,42 @@
 		reg = <0xf0000 0x1000>;
 		interrupts = <18 2 0 0>;
 		fsl,tmu-range = <0xa0000 0x90026 0x8004a 0x1006a>;
-		fsl,tmu-calibration = <0x00000000 0x00000025
-				       0x00000001 0x00000028
-				       0x00000002 0x0000002d
-				       0x00000003 0x00000031
-				       0x00000004 0x00000036
-				       0x00000005 0x0000003a
-				       0x00000006 0x00000040
-				       0x00000007 0x00000044
-				       0x00000008 0x0000004a
-				       0x00000009 0x0000004f
-				       0x0000000a 0x00000054
-
-				       0x00010000 0x0000000d
-				       0x00010001 0x00000013
-				       0x00010002 0x00000019
-				       0x00010003 0x0000001f
-				       0x00010004 0x00000025
-				       0x00010005 0x0000002d
-				       0x00010006 0x00000033
-				       0x00010007 0x00000043
-				       0x00010008 0x0000004b
-				       0x00010009 0x00000053
-
-				       0x00020000 0x00000010
-				       0x00020001 0x00000017
-				       0x00020002 0x0000001f
-				       0x00020003 0x00000029
-				       0x00020004 0x00000031
-				       0x00020005 0x0000003c
-				       0x00020006 0x00000042
-				       0x00020007 0x0000004d
-				       0x00020008 0x00000056
-
-				       0x00030000 0x00000012
-				       0x00030001 0x0000001d>;
+		fsl,tmu-calibration =
+				<0x00000000 0x00000025>,
+				<0x00000001 0x00000028>,
+				<0x00000002 0x0000002d>,
+				<0x00000003 0x00000031>,
+				<0x00000004 0x00000036>,
+				<0x00000005 0x0000003a>,
+				<0x00000006 0x00000040>,
+				<0x00000007 0x00000044>,
+				<0x00000008 0x0000004a>,
+				<0x00000009 0x0000004f>,
+				<0x0000000a 0x00000054>,
+
+				<0x00010000 0x0000000d>,
+				<0x00010001 0x00000013>,
+				<0x00010002 0x00000019>,
+				<0x00010003 0x0000001f>,
+				<0x00010004 0x00000025>,
+				<0x00010005 0x0000002d>,
+				<0x00010006 0x00000033>,
+				<0x00010007 0x00000043>,
+				<0x00010008 0x0000004b>,
+				<0x00010009 0x00000053>,
+
+				<0x00020000 0x00000010>,
+				<0x00020001 0x00000017>,
+				<0x00020002 0x0000001f>,
+				<0x00020003 0x00000029>,
+				<0x00020004 0x00000031>,
+				<0x00020005 0x0000003c>,
+				<0x00020006 0x00000042>,
+				<0x00020007 0x0000004d>,
+				<0x00020008 0x00000056>,
+
+				<0x00030000 0x00000012>,
+				<0x00030001 0x0000001d>;
 		#thermal-sensor-cells = <1>;
 	};
 
diff --git linux-libre-6.7-gnu/arch/powerpc/configs/ppc64_defconfig linux-libre-6.8-gnu/arch/powerpc/configs/ppc64_defconfig
index 6e7b9e8fd225..544a65fda77b 100644
--- linux-libre-6.7-gnu/arch/powerpc/configs/ppc64_defconfig
+++ linux-libre-6.8-gnu/arch/powerpc/configs/ppc64_defconfig
@@ -92,6 +92,7 @@ CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_MEM_SOFT_DIRTY=y
 CONFIG_ZONE_DEVICE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git linux-libre-6.7-gnu/arch/powerpc/configs/ppc6xx_defconfig linux-libre-6.8-gnu/arch/powerpc/configs/ppc6xx_defconfig
index f279703425d4..66c7b28d7450 100644
--- linux-libre-6.7-gnu/arch/powerpc/configs/ppc6xx_defconfig
+++ linux-libre-6.8-gnu/arch/powerpc/configs/ppc6xx_defconfig
@@ -274,7 +274,6 @@ CONFIG_NET_ACT_POLICE=m
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
diff --git linux-libre-6.7-gnu/arch/powerpc/configs/ps3_defconfig linux-libre-6.8-gnu/arch/powerpc/configs/ps3_defconfig
index 2b175ddf82f0..aa8bb0208bcc 100644
--- linux-libre-6.7-gnu/arch/powerpc/configs/ps3_defconfig
+++ linux-libre-6.8-gnu/arch/powerpc/configs/ps3_defconfig
@@ -24,6 +24,7 @@ CONFIG_PS3_VRAM=m
 CONFIG_PS3_LPM=m
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 CONFIG_KEXEC=y
+# CONFIG_PPC64_BIG_ENDIAN_ELF_ABI_V2 is not set
 CONFIG_PPC_4K_PAGES=y
 CONFIG_SCHED_SMT=y
 CONFIG_PM=y
diff --git linux-libre-6.7-gnu/arch/powerpc/crypto/aes-gcm-p10-glue.c linux-libre-6.8-gnu/arch/powerpc/crypto/aes-gcm-p10-glue.c
index 4b6e899895e7..f62ee54076c0 100644
--- linux-libre-6.7-gnu/arch/powerpc/crypto/aes-gcm-p10-glue.c
+++ linux-libre-6.8-gnu/arch/powerpc/crypto/aes-gcm-p10-glue.c
@@ -37,7 +37,7 @@ asmlinkage void aes_p10_gcm_encrypt(u8 *in, u8 *out, size_t len,
 				    void *rkey, u8 *iv, void *Xi);
 asmlinkage void aes_p10_gcm_decrypt(u8 *in, u8 *out, size_t len,
 				    void *rkey, u8 *iv, void *Xi);
-asmlinkage void gcm_init_htable(unsigned char htable[256], unsigned char Xi[16]);
+asmlinkage void gcm_init_htable(unsigned char htable[], unsigned char Xi[]);
 asmlinkage void gcm_ghash_p10(unsigned char *Xi, unsigned char *Htable,
 		unsigned char *aad, unsigned int alen);
 
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/book3s/64/pgtable.h linux-libre-6.8-gnu/arch/powerpc/include/asm/book3s/64/pgtable.h
index cb77eddca54b..927d585652bc 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -17,12 +17,6 @@
 #define _PAGE_EXEC		0x00001 /* execute permission */
 #define _PAGE_WRITE		0x00002 /* write access allowed */
 #define _PAGE_READ		0x00004	/* read access allowed */
-#define _PAGE_NA		_PAGE_PRIVILEGED
-#define _PAGE_NAX		_PAGE_EXEC
-#define _PAGE_RO		_PAGE_READ
-#define _PAGE_ROX		(_PAGE_READ | _PAGE_EXEC)
-#define _PAGE_RW		(_PAGE_READ | _PAGE_WRITE)
-#define _PAGE_RWX		(_PAGE_READ | _PAGE_WRITE | _PAGE_EXEC)
 #define _PAGE_PRIVILEGED	0x00008 /* kernel access only */
 #define _PAGE_SAO		0x00010 /* Strong access order */
 #define _PAGE_NON_IDEMPOTENT	0x00020 /* non idempotent memory */
@@ -532,8 +526,8 @@ static inline bool pte_user(pte_t pte)
 static inline bool pte_access_permitted(pte_t pte, bool write)
 {
 	/*
-	 * _PAGE_READ is needed for any access and will be
-	 * cleared for PROT_NONE
+	 * _PAGE_READ is needed for any access and will be cleared for
+	 * PROT_NONE. Execute-only mapping via PROT_EXEC also returns false.
 	 */
 	if (!pte_present(pte) || !pte_user(pte) || !pte_read(pte))
 		return false;
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/book3s/64/tlbflush.h linux-libre-6.8-gnu/arch/powerpc/include/asm/book3s/64/tlbflush.h
index 1950c1b825b4..fd642b729775 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/book3s/64/tlbflush.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/book3s/64/tlbflush.h
@@ -158,11 +158,6 @@ static inline void flush_tlb_fix_spurious_fault(struct vm_area_struct *vma,
 	 */
 }
 
-static inline bool __pte_protnone(unsigned long pte)
-{
-	return (pte & (pgprot_val(PAGE_NONE) | _PAGE_RWX)) == pgprot_val(PAGE_NONE);
-}
-
 static inline bool __pte_flags_need_flush(unsigned long oldval,
 					  unsigned long newval)
 {
@@ -179,8 +174,8 @@ static inline bool __pte_flags_need_flush(unsigned long oldval,
 	/*
 	 * We do not expect kernel mappings or non-PTEs or not-present PTEs.
 	 */
-	VM_WARN_ON_ONCE(!__pte_protnone(oldval) && oldval & _PAGE_PRIVILEGED);
-	VM_WARN_ON_ONCE(!__pte_protnone(newval) && newval & _PAGE_PRIVILEGED);
+	VM_WARN_ON_ONCE(oldval & _PAGE_PRIVILEGED);
+	VM_WARN_ON_ONCE(newval & _PAGE_PRIVILEGED);
 	VM_WARN_ON_ONCE(!(oldval & _PAGE_PTE));
 	VM_WARN_ON_ONCE(!(newval & _PAGE_PTE));
 	VM_WARN_ON_ONCE(!(oldval & _PAGE_PRESENT));
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/ftrace.h linux-libre-6.8-gnu/arch/powerpc/include/asm/ftrace.h
index 9e5a39b6a311..107fc5a48456 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/ftrace.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/ftrace.h
@@ -20,14 +20,6 @@
 #ifndef __ASSEMBLY__
 extern void _mcount(void);
 
-static inline unsigned long ftrace_call_adjust(unsigned long addr)
-{
-	if (IS_ENABLED(CONFIG_ARCH_USING_PATCHABLE_FUNCTION_ENTRY))
-		addr += MCOUNT_INSN_SIZE;
-
-       return addr;
-}
-
 unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip,
 				    unsigned long sp);
 
@@ -142,8 +134,10 @@ static inline u8 this_cpu_get_ftrace_enabled(void) { return 1; }
 #ifdef CONFIG_FUNCTION_TRACER
 extern unsigned int ftrace_tramp_text[], ftrace_tramp_init[];
 void ftrace_free_init_tramp(void);
+unsigned long ftrace_call_adjust(unsigned long addr);
 #else
 static inline void ftrace_free_init_tramp(void) { }
+static inline unsigned long ftrace_call_adjust(unsigned long addr) { return addr; }
 #endif
 #endif /* !__ASSEMBLY__ */
 
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/hvcall.h linux-libre-6.8-gnu/arch/powerpc/include/asm/hvcall.h
index ddb99e982917..a41e542ba94d 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/hvcall.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/hvcall.h
@@ -349,7 +349,16 @@
 #define H_GET_ENERGY_SCALE_INFO	0x450
 #define H_PKS_SIGNED_UPDATE	0x454
 #define H_WATCHDOG		0x45C
-#define MAX_HCALL_OPCODE	H_WATCHDOG
+#define H_GUEST_GET_CAPABILITIES 0x460
+#define H_GUEST_SET_CAPABILITIES 0x464
+#define H_GUEST_CREATE		0x470
+#define H_GUEST_CREATE_VCPU	0x474
+#define H_GUEST_GET_STATE	0x478
+#define H_GUEST_SET_STATE	0x47C
+#define H_GUEST_RUN_VCPU	0x480
+#define H_GUEST_COPY_MEMORY	0x484
+#define H_GUEST_DELETE		0x488
+#define MAX_HCALL_OPCODE	H_GUEST_DELETE
 
 /* Scope args for H_SCM_UNBIND_ALL */
 #define H_UNBIND_SCOPE_ALL (0x1)
@@ -393,15 +402,6 @@
 #define H_ENTER_NESTED		0xF804
 #define H_TLB_INVALIDATE	0xF808
 #define H_COPY_TOFROM_GUEST	0xF80C
-#define H_GUEST_GET_CAPABILITIES 0x460
-#define H_GUEST_SET_CAPABILITIES 0x464
-#define H_GUEST_CREATE		0x470
-#define H_GUEST_CREATE_VCPU	0x474
-#define H_GUEST_GET_STATE	0x478
-#define H_GUEST_SET_STATE	0x47C
-#define H_GUEST_RUN_VCPU	0x480
-#define H_GUEST_COPY_MEMORY	0x484
-#define H_GUEST_DELETE		0x488
 
 /* Flags for H_SVM_PAGE_IN */
 #define H_PAGE_IN_SHARED        0x1
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/hvconsole.h linux-libre-6.8-gnu/arch/powerpc/include/asm/hvconsole.h
index ccb2034506f0..d841a97010a0 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/hvconsole.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/hvconsole.h
@@ -21,8 +21,8 @@
  * Vio firmware always attempts to fetch MAX_VIO_GET_CHARS chars.  The 'count'
  * parm is included to conform to put_chars() function pointer template
  */
-extern int hvc_get_chars(uint32_t vtermno, char *buf, int count);
-extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count);
+extern ssize_t hvc_get_chars(uint32_t vtermno, u8 *buf, size_t count);
+extern ssize_t hvc_put_chars(uint32_t vtermno, const u8 *buf, size_t count);
 
 /* Provided by HVC VIO */
 void hvc_vio_init_early(void);
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/hvsi.h linux-libre-6.8-gnu/arch/powerpc/include/asm/hvsi.h
index 464a7519ed64..9058edcb632b 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/hvsi.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/hvsi.h
@@ -64,7 +64,7 @@ struct hvsi_priv {
 	unsigned int	inbuf_len;	/* data in input buffer */
 	unsigned char	inbuf[HVSI_INBUF_SIZE];
 	unsigned int	inbuf_cur;	/* Cursor in input buffer */
-	unsigned int	inbuf_pktlen;	/* packet length from cursor */
+	size_t		inbuf_pktlen;	/* packet length from cursor */
 	atomic_t	seqno;		/* packet sequence number */
 	unsigned int	opened:1;	/* driver opened */
 	unsigned int	established:1;	/* protocol established */
@@ -72,24 +72,26 @@ struct hvsi_priv {
 	unsigned int	mctrl_update:1;	/* modem control updated */
 	unsigned short	mctrl;		/* modem control */
 	struct tty_struct *tty;		/* tty structure */
-	int (*get_chars)(uint32_t termno, char *buf, int count);
-	int (*put_chars)(uint32_t termno, const char *buf, int count);
+	ssize_t (*get_chars)(uint32_t termno, u8 *buf, size_t count);
+	ssize_t (*put_chars)(uint32_t termno, const u8 *buf, size_t count);
 	uint32_t	termno;
 };
 
 /* hvsi lib functions */
 struct hvc_struct;
 extern void hvsilib_init(struct hvsi_priv *pv,
-			 int (*get_chars)(uint32_t termno, char *buf, int count),
-			 int (*put_chars)(uint32_t termno, const char *buf,
-					  int count),
+			 ssize_t (*get_chars)(uint32_t termno, u8 *buf,
+					      size_t count),
+			 ssize_t (*put_chars)(uint32_t termno, const u8 *buf,
+					      size_t count),
 			 int termno, int is_console);
 extern int hvsilib_open(struct hvsi_priv *pv, struct hvc_struct *hp);
 extern void hvsilib_close(struct hvsi_priv *pv, struct hvc_struct *hp);
 extern int hvsilib_read_mctrl(struct hvsi_priv *pv);
 extern int hvsilib_write_mctrl(struct hvsi_priv *pv, int dtr);
 extern void hvsilib_establish(struct hvsi_priv *pv);
-extern int hvsilib_get_chars(struct hvsi_priv *pv, char *buf, int count);
-extern int hvsilib_put_chars(struct hvsi_priv *pv, const char *buf, int count);
+extern ssize_t hvsilib_get_chars(struct hvsi_priv *pv, u8 *buf, size_t count);
+extern ssize_t hvsilib_put_chars(struct hvsi_priv *pv, const u8 *buf,
+				 size_t count);
 
 #endif /* _HVSI_H */
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/io.h linux-libre-6.8-gnu/arch/powerpc/include/asm/io.h
index 5220274a6277..08c550ed49be 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/io.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/io.h
@@ -709,12 +709,6 @@ static inline void name at					\
 #define memcpy_fromio memcpy_fromio
 #define memcpy_toio memcpy_toio
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
 /*
  * We don't do relaxed operations yet, at least not with this semantic
  */
@@ -900,7 +894,6 @@ void __iomem *ioremap_wt(phys_addr_t address, unsigned long size);
 #endif
 
 void __iomem *ioremap_coherent(phys_addr_t address, unsigned long size);
-#define ioremap_uc(addr, size)		ioremap((addr), (size))
 #define ioremap_cache(addr, size) \
 	ioremap_prot((addr), (size), pgprot_val(PAGE_KERNEL))
 
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/irq_work.h linux-libre-6.8-gnu/arch/powerpc/include/asm/irq_work.h
index b8b0be8f1a07..c6d3078bd8c3 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/irq_work.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/irq_work.h
@@ -6,6 +6,5 @@ static inline bool arch_irq_work_has_interrupt(void)
 {
 	return true;
 }
-extern void arch_irq_work_raise(void);
 
 #endif /* _ASM_POWERPC_IRQ_WORK_H */
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/jump_label.h linux-libre-6.8-gnu/arch/powerpc/include/asm/jump_label.h
index 93ce3ec25387..2f2a86ed2280 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/jump_label.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/jump_label.h
@@ -17,7 +17,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 "nop # arch_static_branch\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".long 1b - ., %l[l_yes] - .\n\t"
@@ -32,7 +32,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 "b %l[l_yes] # arch_static_branch_jump\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".long 1b - ., %l[l_yes] - .\n\t"
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/kvm_book3s.h linux-libre-6.8-gnu/arch/powerpc/include/asm/kvm_book3s.h
index 4f527d09c92b..3e1e2a698c9e 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/kvm_book3s.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/kvm_book3s.h
@@ -302,6 +302,7 @@ void kvmhv_nested_exit(void);
 void kvmhv_vm_nested_init(struct kvm *kvm);
 long kvmhv_set_partition_table(struct kvm_vcpu *vcpu);
 long kvmhv_copy_tofrom_guest_nested(struct kvm_vcpu *vcpu);
+void kvmhv_flush_lpid(u64 lpid);
 void kvmhv_set_ptbl_entry(u64 lpid, u64 dw0, u64 dw1);
 void kvmhv_release_all_nested(struct kvm *kvm);
 long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu);
@@ -593,13 +594,17 @@ static inline u##size kvmppc_get_##reg(struct kvm_vcpu *vcpu)		\
 
 
 KVMPPC_BOOK3S_VCORE_ACCESSOR(vtb, 64, KVMPPC_GSID_VTB)
-KVMPPC_BOOK3S_VCORE_ACCESSOR(tb_offset, 64, KVMPPC_GSID_TB_OFFSET)
 KVMPPC_BOOK3S_VCORE_ACCESSOR_GET(arch_compat, 32, KVMPPC_GSID_LOGICAL_PVR)
 KVMPPC_BOOK3S_VCORE_ACCESSOR_GET(lpcr, 64, KVMPPC_GSID_LPCR)
+KVMPPC_BOOK3S_VCORE_ACCESSOR_SET(tb_offset, 64, KVMPPC_GSID_TB_OFFSET)
+
+static inline u64 kvmppc_get_tb_offset(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.vcore->tb_offset;
+}
 
 static inline u64 kvmppc_get_dec_expires(struct kvm_vcpu *vcpu)
 {
-	WARN_ON(kvmhv_nestedv2_cached_reload(vcpu, KVMPPC_GSID_TB_OFFSET) < 0);
 	WARN_ON(kvmhv_nestedv2_cached_reload(vcpu, KVMPPC_GSID_DEC_EXPIRY_TB) < 0);
 	return vcpu->arch.dec_expires;
 }
@@ -607,7 +612,6 @@ static inline u64 kvmppc_get_dec_expires(struct kvm_vcpu *vcpu)
 static inline void kvmppc_set_dec_expires(struct kvm_vcpu *vcpu, u64 val)
 {
 	vcpu->arch.dec_expires = val;
-	WARN_ON(kvmhv_nestedv2_cached_reload(vcpu, KVMPPC_GSID_TB_OFFSET) < 0);
 	kvmhv_nestedv2_mark_dirty(vcpu, KVMPPC_GSID_DEC_EXPIRY_TB);
 }
 
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/kvm_book3s_64.h linux-libre-6.8-gnu/arch/powerpc/include/asm/kvm_book3s_64.h
index 2477021bff54..d8729ec81ca0 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/kvm_book3s_64.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/kvm_book3s_64.h
@@ -682,6 +682,7 @@ void kvmhv_nestedv2_vcpu_free(struct kvm_vcpu *vcpu, struct kvmhv_nestedv2_io *i
 int kvmhv_nestedv2_flush_vcpu(struct kvm_vcpu *vcpu, u64 time_limit);
 int kvmhv_nestedv2_set_ptbl_entry(unsigned long lpid, u64 dw0, u64 dw1);
 int kvmhv_nestedv2_parse_output(struct kvm_vcpu *vcpu);
+int kvmhv_nestedv2_set_vpa(struct kvm_vcpu *vcpu, unsigned long vpa);
 
 #endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */
 
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/kvm_host.h linux-libre-6.8-gnu/arch/powerpc/include/asm/kvm_host.h
index 8799b37be295..8abac532146e 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/kvm_host.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/kvm_host.h
@@ -63,8 +63,6 @@
 
 #include <linux/mmu_notifier.h>
 
-#define KVM_ARCH_WANT_MMU_NOTIFIER
-
 #define HPTEG_CACHE_NUM			(1 << 15)
 #define HPTEG_HASH_BITS_PTE		13
 #define HPTEG_HASH_BITS_PTE_LONG	12
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/linkage.h linux-libre-6.8-gnu/arch/powerpc/include/asm/linkage.h
index b88d1d2cf304..b71b9582e754 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/linkage.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/linkage.h
@@ -4,9 +4,6 @@
 
 #include <asm/types.h>
 
-#define __ALIGN		.align 2
-#define __ALIGN_STR	".align 2"
-
 #ifdef CONFIG_PPC64_ELF_ABI_V1
 #define cond_syscall(x) \
 	asm ("\t.weak " #x "\n\t.set " #x ", sys_ni_syscall\n"		\
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/mmu.h linux-libre-6.8-gnu/arch/powerpc/include/asm/mmu.h
index 52cc25864a1b..d8b7e246a32f 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/mmu.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/mmu.h
@@ -412,5 +412,9 @@ extern void *abatron_pteptrs[2];
 #include <asm/nohash/mmu.h>
 #endif
 
+#if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP)
+#define __HAVE_ARCH_RESERVED_KERNEL_PAGES
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_MMU_H_ */
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/mmzone.h linux-libre-6.8-gnu/arch/powerpc/include/asm/mmzone.h
index 4c6c6dbd182f..da827d2d0866 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/mmzone.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/mmzone.h
@@ -42,14 +42,6 @@ u64 memory_hotplug_max(void);
 #else
 #define memory_hotplug_max() memblock_end_of_DRAM()
 #endif /* CONFIG_NUMA */
-#ifdef CONFIG_FA_DUMP
-#define __HAVE_ARCH_RESERVED_KERNEL_PAGES
-#endif
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-extern int create_section_mapping(unsigned long start, unsigned long end,
-				  int nid, pgprot_t prot);
-#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_MMZONE_H_ */
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/opal.h linux-libre-6.8-gnu/arch/powerpc/include/asm/opal.h
index b66b0c615f4f..af304e6cb486 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/opal.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/opal.h
@@ -313,9 +313,11 @@ extern int early_init_dt_scan_recoverable_ranges(unsigned long node,
 				 const char *uname, int depth, void *data);
 void __init opal_configure_cores(void);
 
-extern int opal_get_chars(uint32_t vtermno, char *buf, int count);
-extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len);
-extern int opal_put_chars_atomic(uint32_t vtermno, const char *buf, int total_len);
+extern ssize_t opal_get_chars(uint32_t vtermno, u8 *buf, size_t count);
+extern ssize_t opal_put_chars(uint32_t vtermno, const u8 *buf,
+			      size_t total_len);
+extern ssize_t opal_put_chars_atomic(uint32_t vtermno, const u8 *buf,
+				     size_t total_len);
 extern int opal_flush_chars(uint32_t vtermno, bool wait);
 extern int opal_flush_console(uint32_t vtermno);
 
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/papr-sysparm.h linux-libre-6.8-gnu/arch/powerpc/include/asm/papr-sysparm.h
index f5fdbd8ae9db..c3cd5b131033 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/papr-sysparm.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/papr-sysparm.h
@@ -2,8 +2,10 @@
 #ifndef _ASM_POWERPC_PAPR_SYSPARM_H
 #define _ASM_POWERPC_PAPR_SYSPARM_H
 
+#include <uapi/asm/papr-sysparm.h>
+
 typedef struct {
-	const u32 token;
+	u32 token;
 } papr_sysparm_t;
 
 #define mk_papr_sysparm(x_) ((papr_sysparm_t){ .token = x_, })
@@ -20,14 +22,17 @@ typedef struct {
 #define PAPR_SYSPARM_TLB_BLOCK_INVALIDATE_ATTRS    mk_papr_sysparm(50)
 #define PAPR_SYSPARM_LPAR_NAME                     mk_papr_sysparm(55)
 
-enum {
-	PAPR_SYSPARM_MAX_INPUT  = 1024,
-	PAPR_SYSPARM_MAX_OUTPUT = 4000,
-};
-
+/**
+ * struct papr_sysparm_buf - RTAS work area layout for system parameter functions.
+ *
+ * This is the memory layout of the buffers passed to/from
+ * ibm,get-system-parameter and ibm,set-system-parameter. It is
+ * distinct from the papr_sysparm_io_block structure that is passed
+ * between user space and the kernel.
+ */
 struct papr_sysparm_buf {
 	__be16 len;
-	char val[PAPR_SYSPARM_MAX_OUTPUT];
+	u8 val[PAPR_SYSPARM_MAX_OUTPUT];
 };
 
 struct papr_sysparm_buf *papr_sysparm_buf_alloc(void);
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/paravirt.h linux-libre-6.8-gnu/arch/powerpc/include/asm/paravirt.h
index ac4279208d63..b78b82d66057 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/paravirt.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/paravirt.h
@@ -76,6 +76,17 @@ static inline bool is_vcpu_idle(int vcpu)
 {
 	return lppaca_of(vcpu).idle;
 }
+
+static inline bool vcpu_is_dispatched(int vcpu)
+{
+	/*
+	 * This is the yield_count.  An "odd" value (low bit on) means that
+	 * the processor is yielded (either because of an OS yield or a
+	 * hypervisor preempt).  An even value implies that the processor is
+	 * currently executing.
+	 */
+	return (!(yield_count_of(vcpu) & 1));
+}
 #else
 static inline bool is_shared_processor(void)
 {
@@ -109,6 +120,10 @@ static inline bool is_vcpu_idle(int vcpu)
 {
 	return false;
 }
+static inline bool vcpu_is_dispatched(int vcpu)
+{
+	return true;
+}
 #endif
 
 #define vcpu_is_preempted vcpu_is_preempted
@@ -134,12 +149,12 @@ static inline bool vcpu_is_preempted(int cpu)
 	 * If the hypervisor has dispatched the target CPU on a physical
 	 * processor, then the target CPU is definitely not preempted.
 	 */
-	if (!(yield_count_of(cpu) & 1))
+	if (vcpu_is_dispatched(cpu))
 		return false;
 
 	/*
-	 * If the target CPU has yielded to Hypervisor but OS has not
-	 * requested idle then the target CPU is definitely preempted.
+	 * if the target CPU is not dispatched and the guest OS
+	 * has not marked the CPU idle, then it is hypervisor preempted.
 	 */
 	if (!is_vcpu_idle(cpu))
 		return true;
@@ -166,7 +181,7 @@ static inline bool vcpu_is_preempted(int cpu)
 
 		/*
 		 * The PowerVM hypervisor dispatches VMs on a whole core
-		 * basis. So we know that a thread sibling of the local CPU
+		 * basis. So we know that a thread sibling of the executing CPU
 		 * cannot have been preempted by the hypervisor, even if it
 		 * has called H_CONFER, which will set the yield bit.
 		 */
@@ -174,15 +189,17 @@ static inline bool vcpu_is_preempted(int cpu)
 			return false;
 
 		/*
-		 * If any of the threads of the target CPU's core are not
-		 * preempted or ceded, then consider target CPU to be
-		 * non-preempted.
+		 * The specific target CPU was marked by guest OS as idle, but
+		 * then also check all other cpus in the core for PowerVM
+		 * because it does core scheduling and one of the vcpu
+		 * of the core getting preempted by hypervisor implies
+		 * other vcpus can also be considered preempted.
 		 */
 		first_cpu = cpu_first_thread_sibling(cpu);
 		for (i = first_cpu; i < first_cpu + threads_per_core; i++) {
 			if (i == cpu)
 				continue;
-			if (!(yield_count_of(i) & 1))
+			if (vcpu_is_dispatched(i))
 				return false;
 			if (!is_vcpu_idle(i))
 				return true;
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/ppc-pci.h linux-libre-6.8-gnu/arch/powerpc/include/asm/ppc-pci.h
index d9fcff575027..a8b7e8682f5b 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/ppc-pci.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/ppc-pci.h
@@ -30,11 +30,24 @@ void *pci_traverse_device_nodes(struct device_node *start,
 				void *data);
 extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
 
+#if defined(CONFIG_IOMMU_API) && (defined(CONFIG_PPC_PSERIES) || \
+				  defined(CONFIG_PPC_POWERNV))
+extern void ppc_iommu_register_device(struct pci_controller *phb);
+extern void ppc_iommu_unregister_device(struct pci_controller *phb);
+#else
+static inline void ppc_iommu_register_device(struct pci_controller *phb) { }
+static inline void ppc_iommu_unregister_device(struct pci_controller *phb) { }
+#endif
+
+
 /* From rtas_pci.h */
 extern void init_pci_config_tokens (void);
 extern unsigned long get_phb_buid (struct device_node *);
 extern int rtas_setup_phb(struct pci_controller *phb);
 
+int rtas_pci_dn_read_config(struct pci_dn *pdn, int where, int size, u32 *val);
+int rtas_pci_dn_write_config(struct pci_dn *pdn, int where, int size, u32 val);
+
 #ifdef CONFIG_EEH
 
 void eeh_addr_cache_insert_dev(struct pci_dev *dev);
@@ -44,8 +57,6 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity);
 int eeh_pci_enable(struct eeh_pe *pe, int function);
 int eeh_pe_reset_full(struct eeh_pe *pe, bool include_passed);
 void eeh_save_bars(struct eeh_dev *edev);
-int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
-int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
 void eeh_pe_state_mark(struct eeh_pe *pe, int state);
 void eeh_pe_mark_isolated(struct eeh_pe *pe);
 void eeh_pe_state_clear(struct eeh_pe *pe, int state, bool include_passed);
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/ps3.h linux-libre-6.8-gnu/arch/powerpc/include/asm/ps3.h
index a5f36546a052..d13d8fdc3411 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/ps3.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/ps3.h
@@ -514,4 +514,10 @@ u64 ps3_get_spe_id(void *arg);
 
 void ps3_early_mm_init(void);
 
+#ifdef CONFIG_PPC_EARLY_DEBUG_PS3GELIC
+void udbg_shutdown_ps3gelic(void);
+#else
+static inline void udbg_shutdown_ps3gelic(void) {}
+#endif
+
 #endif
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/reg.h linux-libre-6.8-gnu/arch/powerpc/include/asm/reg.h
index 4ae4ab9090a2..bb47af9054a9 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/reg.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/reg.h
@@ -617,6 +617,8 @@
 #endif
 #define SPRN_HID2	0x3F8		/* Hardware Implementation Register 2 */
 #define SPRN_HID2_GEKKO	0x398		/* Gekko HID2 Register */
+#define SPRN_HID2_G2_LE	0x3F3		/* G2_LE HID2 Register */
+#define  HID2_G2_LE_HBE	(1<<18)		/* High BAT Enable (G2_LE) */
 #define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
 #define SPRN_IABR2	0x3FA		/* 83xx */
 #define SPRN_IBCR	0x135		/* 83xx Insn Breakpoint Control Reg */
@@ -1361,6 +1363,7 @@
 #define PVR_POWER8E	0x004B
 #define PVR_POWER8NVL	0x004C
 #define PVR_POWER8	0x004D
+#define PVR_HX_C2000	0x0066
 #define PVR_POWER9	0x004E
 #define PVR_POWER10	0x0080
 #define PVR_BE		0x0070
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/reg_a2.h linux-libre-6.8-gnu/arch/powerpc/include/asm/reg_a2.h
deleted file mode 100644
index 74fba29e9491..000000000000
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/reg_a2.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *  Register definitions specific to the A2 core
- *
- *  Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
- */
-
-#ifndef __ASM_POWERPC_REG_A2_H__
-#define __ASM_POWERPC_REG_A2_H__
-
-#include <asm/asm-const.h>
-
-#define SPRN_TENSR	0x1b5
-#define SPRN_TENS	0x1b6	/* Thread ENable Set */
-#define SPRN_TENC	0x1b7	/* Thread ENable Clear */
-
-#define SPRN_A2_CCR0	0x3f0	/* Core Configuration Register 0 */
-#define SPRN_A2_CCR1	0x3f1	/* Core Configuration Register 1 */
-#define SPRN_A2_CCR2	0x3f2	/* Core Configuration Register 2 */
-#define SPRN_MMUCR0	0x3fc	/* MMU Control Register 0 */
-#define SPRN_MMUCR1	0x3fd	/* MMU Control Register 1 */
-#define SPRN_MMUCR2	0x3fe	/* MMU Control Register 2 */
-#define SPRN_MMUCR3	0x3ff	/* MMU Control Register 3 */
-
-#define SPRN_IAR	0x372
-
-#define SPRN_IUCR0	0x3f3
-#define IUCR0_ICBI_ACK	0x1000
-
-#define SPRN_XUCR0	0x3f6	/* Execution Unit Config Register 0 */
-
-#define A2_IERAT_SIZE	16
-#define A2_DERAT_SIZE	32
-
-/* A2 MMUCR0 bits */
-#define MMUCR0_ECL	0x80000000	/* Extended Class for TLB fills */
-#define MMUCR0_TID_NZ	0x40000000	/* TID is non-zero */
-#define MMUCR0_TS	0x10000000	/* Translation space for TLB fills */
-#define MMUCR0_TGS	0x20000000	/* Guest space for TLB fills */
-#define MMUCR0_TLBSEL	0x0c000000	/* TLB or ERAT target for TLB fills */
-#define MMUCR0_TLBSEL_U	0x00000000	/*  TLBSEL = UTLB */
-#define MMUCR0_TLBSEL_I	0x08000000	/*  TLBSEL = I-ERAT */
-#define MMUCR0_TLBSEL_D	0x0c000000	/*  TLBSEL = D-ERAT */
-#define MMUCR0_LOCKSRSH	0x02000000	/* Use TLB lock on tlbsx. */
-#define MMUCR0_TID_MASK	0x000000ff	/* TID field */
-
-/* A2 MMUCR1 bits */
-#define MMUCR1_IRRE		0x80000000	/* I-ERAT round robin enable */
-#define MMUCR1_DRRE		0x40000000	/* D-ERAT round robin enable */
-#define MMUCR1_REE		0x20000000	/* Reference Exception Enable*/
-#define MMUCR1_CEE		0x10000000	/* Change exception enable */
-#define MMUCR1_CSINV_ALL	0x00000000	/* Inval ERAT on all CS evts */
-#define MMUCR1_CSINV_NISYNC	0x04000000	/* Inval ERAT on all ex isync*/
-#define MMUCR1_CSINV_NEVER	0x0c000000	/* Don't inval ERAT on CS */
-#define MMUCR1_ICTID		0x00080000	/* IERAT class field as TID */
-#define MMUCR1_ITTID		0x00040000	/* IERAT thdid field as TID */
-#define MMUCR1_DCTID		0x00020000	/* DERAT class field as TID */
-#define MMUCR1_DTTID		0x00010000	/* DERAT thdid field as TID */
-#define MMUCR1_DCCD		0x00008000	/* DERAT class ignore */
-#define MMUCR1_TLBWE_BINV	0x00004000	/* back invalidate on tlbwe */
-
-/* A2 MMUCR2 bits */
-#define MMUCR2_PSSEL_SHIFT	4
-
-/* A2 MMUCR3 bits */
-#define MMUCR3_THID		0x0000000f	/* Thread ID */
-
-/* *** ERAT TLB bits definitions */
-#define TLB0_EPN_MASK		ASM_CONST(0xfffffffffffff000)
-#define TLB0_CLASS_MASK		ASM_CONST(0x0000000000000c00)
-#define TLB0_CLASS_00		ASM_CONST(0x0000000000000000)
-#define TLB0_CLASS_01		ASM_CONST(0x0000000000000400)
-#define TLB0_CLASS_10		ASM_CONST(0x0000000000000800)
-#define TLB0_CLASS_11		ASM_CONST(0x0000000000000c00)
-#define TLB0_V			ASM_CONST(0x0000000000000200)
-#define TLB0_X			ASM_CONST(0x0000000000000100)
-#define TLB0_SIZE_MASK		ASM_CONST(0x00000000000000f0)
-#define TLB0_SIZE_4K		ASM_CONST(0x0000000000000010)
-#define TLB0_SIZE_64K		ASM_CONST(0x0000000000000030)
-#define TLB0_SIZE_1M		ASM_CONST(0x0000000000000050)
-#define TLB0_SIZE_16M		ASM_CONST(0x0000000000000070)
-#define TLB0_SIZE_1G		ASM_CONST(0x00000000000000a0)
-#define TLB0_THDID_MASK		ASM_CONST(0x000000000000000f)
-#define TLB0_THDID_0		ASM_CONST(0x0000000000000001)
-#define TLB0_THDID_1		ASM_CONST(0x0000000000000002)
-#define TLB0_THDID_2		ASM_CONST(0x0000000000000004)
-#define TLB0_THDID_3		ASM_CONST(0x0000000000000008)
-#define TLB0_THDID_ALL		ASM_CONST(0x000000000000000f)
-
-#define TLB1_RESVATTR		ASM_CONST(0x00f0000000000000)
-#define TLB1_U0			ASM_CONST(0x0008000000000000)
-#define TLB1_U1			ASM_CONST(0x0004000000000000)
-#define TLB1_U2			ASM_CONST(0x0002000000000000)
-#define TLB1_U3			ASM_CONST(0x0001000000000000)
-#define TLB1_R			ASM_CONST(0x0000800000000000)
-#define TLB1_C			ASM_CONST(0x0000400000000000)
-#define TLB1_RPN_MASK		ASM_CONST(0x000003fffffff000)
-#define TLB1_W			ASM_CONST(0x0000000000000800)
-#define TLB1_I			ASM_CONST(0x0000000000000400)
-#define TLB1_M			ASM_CONST(0x0000000000000200)
-#define TLB1_G			ASM_CONST(0x0000000000000100)
-#define TLB1_E			ASM_CONST(0x0000000000000080)
-#define TLB1_VF			ASM_CONST(0x0000000000000040)
-#define TLB1_UX			ASM_CONST(0x0000000000000020)
-#define TLB1_SX			ASM_CONST(0x0000000000000010)
-#define TLB1_UW			ASM_CONST(0x0000000000000008)
-#define TLB1_SW			ASM_CONST(0x0000000000000004)
-#define TLB1_UR			ASM_CONST(0x0000000000000002)
-#define TLB1_SR			ASM_CONST(0x0000000000000001)
-
-/* A2 erativax attributes definitions */
-#define ERATIVAX_RS_IS_ALL		0x000
-#define ERATIVAX_RS_IS_TID		0x040
-#define ERATIVAX_RS_IS_CLASS		0x080
-#define ERATIVAX_RS_IS_FULLMATCH	0x0c0
-#define ERATIVAX_CLASS_00		0x000
-#define ERATIVAX_CLASS_01		0x010
-#define ERATIVAX_CLASS_10		0x020
-#define ERATIVAX_CLASS_11		0x030
-#define ERATIVAX_PSIZE_4K		(TLB_PSIZE_4K >> 1)
-#define ERATIVAX_PSIZE_64K		(TLB_PSIZE_64K >> 1)
-#define ERATIVAX_PSIZE_1M		(TLB_PSIZE_1M >> 1)
-#define ERATIVAX_PSIZE_16M		(TLB_PSIZE_16M >> 1)
-#define ERATIVAX_PSIZE_1G		(TLB_PSIZE_1G >> 1)
-
-/* A2 eratilx attributes definitions */
-#define ERATILX_T_ALL			0
-#define ERATILX_T_TID			1
-#define ERATILX_T_TGS			2
-#define ERATILX_T_FULLMATCH		3
-#define ERATILX_T_CLASS0		4
-#define ERATILX_T_CLASS1		5
-#define ERATILX_T_CLASS2		6
-#define ERATILX_T_CLASS3		7
-
-/* XUCR0 bits */
-#define XUCR0_TRACE_UM_T0		0x40000000	/* Thread 0 */
-#define XUCR0_TRACE_UM_T1		0x20000000	/* Thread 1 */
-#define XUCR0_TRACE_UM_T2		0x10000000	/* Thread 2 */
-#define XUCR0_TRACE_UM_T3		0x08000000	/* Thread 3 */
-
-/* A2 CCR0 register */
-#define A2_CCR0_PME_DISABLED		0x00000000
-#define A2_CCR0_PME_SLEEP		0x40000000
-#define A2_CCR0_PME_RVW			0x80000000
-#define A2_CCR0_PME_DISABLED2		0xc0000000
-
-/* A2 CCR2 register */
-#define A2_CCR2_ERAT_ONLY_MODE		0x00000001
-#define A2_CCR2_ENABLE_ICSWX		0x00000002
-#define A2_CCR2_ENABLE_PC		0x20000000
-#define A2_CCR2_ENABLE_TRACE		0x40000000
-
-#endif /* __ASM_POWERPC_REG_A2_H__ */
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/rtas.h linux-libre-6.8-gnu/arch/powerpc/include/asm/rtas.h
index c697c3c74694..065ffd1b2f8a 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/rtas.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/rtas.h
@@ -3,6 +3,7 @@
 #define _POWERPC_RTAS_H
 #ifdef __KERNEL__
 
+#include <linux/mutex.h>
 #include <linux/spinlock.h>
 #include <asm/page.h>
 #include <asm/rtas-types.h>
@@ -68,7 +69,7 @@ enum rtas_function_index {
 	RTAS_FNIDX__IBM_READ_SLOT_RESET_STATE,
 	RTAS_FNIDX__IBM_READ_SLOT_RESET_STATE2,
 	RTAS_FNIDX__IBM_REMOVE_PE_DMA_WINDOW,
-	RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOWS,
+	RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOW,
 	RTAS_FNIDX__IBM_SCAN_LOG_DUMP,
 	RTAS_FNIDX__IBM_SET_DYNAMIC_INDICATOR,
 	RTAS_FNIDX__IBM_SET_EEH_OPTION,
@@ -163,7 +164,7 @@ typedef struct {
 #define RTAS_FN_IBM_READ_SLOT_RESET_STATE         rtas_fn_handle(RTAS_FNIDX__IBM_READ_SLOT_RESET_STATE)
 #define RTAS_FN_IBM_READ_SLOT_RESET_STATE2        rtas_fn_handle(RTAS_FNIDX__IBM_READ_SLOT_RESET_STATE2)
 #define RTAS_FN_IBM_REMOVE_PE_DMA_WINDOW          rtas_fn_handle(RTAS_FNIDX__IBM_REMOVE_PE_DMA_WINDOW)
-#define RTAS_FN_IBM_RESET_PE_DMA_WINDOWS          rtas_fn_handle(RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOWS)
+#define RTAS_FN_IBM_RESET_PE_DMA_WINDOW           rtas_fn_handle(RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOW)
 #define RTAS_FN_IBM_SCAN_LOG_DUMP                 rtas_fn_handle(RTAS_FNIDX__IBM_SCAN_LOG_DUMP)
 #define RTAS_FN_IBM_SET_DYNAMIC_INDICATOR         rtas_fn_handle(RTAS_FNIDX__IBM_SET_DYNAMIC_INDICATOR)
 #define RTAS_FN_IBM_SET_EEH_OPTION                rtas_fn_handle(RTAS_FNIDX__IBM_SET_EEH_OPTION)
@@ -201,12 +202,25 @@ typedef struct {
 /* Memory set aside for sys_rtas to use with calls that need a work area. */
 #define RTAS_USER_REGION_SIZE (64 * 1024)
 
-/* RTAS return status codes */
-#define RTAS_HARDWARE_ERROR	-1    /* Hardware Error */
-#define RTAS_BUSY		-2    /* RTAS Busy */
-#define RTAS_INVALID_PARAMETER	-3    /* Invalid indicator/domain/sensor etc. */
-#define RTAS_EXTENDED_DELAY_MIN	9900
-#define RTAS_EXTENDED_DELAY_MAX	9905
+/*
+ * Common RTAS function return values, derived from the table "RTAS
+ * Status Word Values" in PAPR+ v2.13 7.2.8: "Return Codes". If a
+ * function can return a value in this table then generally it has the
+ * meaning listed here. More extended commentary in the documentation
+ * for rtas_call().
+ *
+ * RTAS functions may use negative and positive numbers not in this
+ * set for function-specific error and success conditions,
+ * respectively.
+ */
+#define RTAS_SUCCESS                     0 /* Success. */
+#define RTAS_HARDWARE_ERROR             -1 /* Hardware or other unspecified error. */
+#define RTAS_BUSY                       -2 /* Retry immediately. */
+#define RTAS_INVALID_PARAMETER          -3 /* Invalid indicator/domain/sensor etc. */
+#define RTAS_UNEXPECTED_STATE_CHANGE    -7 /* Seems limited to EEH and slot reset. */
+#define RTAS_EXTENDED_DELAY_MIN       9900 /* Retry after delaying for ~1ms. */
+#define RTAS_EXTENDED_DELAY_MAX       9905 /* Retry after delaying for ~100s. */
+#define RTAS_ML_ISOLATION_ERROR      -9000 /* Multi-level isolation error. */
 
 /* statuses specific to ibm,suspend-me */
 #define RTAS_SUSPEND_ABORTED     9000 /* Suspension aborted */
@@ -268,7 +282,7 @@ typedef struct {
 #define RTAS_TYPE_DEALLOC		0xE3
 #define RTAS_TYPE_DUMP			0xE4
 #define RTAS_TYPE_HOTPLUG		0xE5
-/* I don't add PowerMGM events right now, this is a different topic */ 
+/* I don't add PowerMGM events right now, this is a different topic */
 #define RTAS_TYPE_PMGM_POWER_SW_ON	0x60
 #define RTAS_TYPE_PMGM_POWER_SW_OFF	0x61
 #define RTAS_TYPE_PMGM_LID_OPEN		0x62
@@ -408,44 +422,41 @@ static inline bool rtas_function_implemented(const rtas_fn_handle_t handle)
 {
 	return rtas_function_token(handle) != RTAS_UNKNOWN_SERVICE;
 }
-extern int rtas_token(const char *service);
-extern int rtas_service_present(const char *service);
-extern int rtas_call(int token, int, int, int *, ...);
+int rtas_token(const char *service);
+int rtas_call(int token, int nargs, int nret, int *outputs, ...);
 void rtas_call_unlocked(struct rtas_args *args, int token, int nargs,
 			int nret, ...);
-extern void __noreturn rtas_restart(char *cmd);
-extern void rtas_power_off(void);
-extern void __noreturn rtas_halt(void);
-extern void rtas_os_term(char *str);
+void __noreturn rtas_restart(char *cmd);
+void rtas_power_off(void);
+void __noreturn rtas_halt(void);
+void rtas_os_term(char *str);
 void rtas_activate_firmware(void);
-extern int rtas_get_sensor(int sensor, int index, int *state);
-extern int rtas_get_sensor_fast(int sensor, int index, int *state);
-extern int rtas_get_power_level(int powerdomain, int *level);
-extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
-extern bool rtas_indicator_present(int token, int *maxindex);
-extern int rtas_set_indicator(int indicator, int index, int new_value);
-extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
-extern void rtas_progress(char *s, unsigned short hex);
+int rtas_get_sensor(int sensor, int index, int *state);
+int rtas_get_sensor_fast(int sensor, int index, int *state);
+int rtas_get_power_level(int powerdomain, int *level);
+int rtas_set_power_level(int powerdomain, int level, int *setlevel);
+bool rtas_indicator_present(int token, int *maxindex);
+int rtas_set_indicator(int indicator, int index, int new_value);
+int rtas_set_indicator_fast(int indicator, int index, int new_value);
+void rtas_progress(char *s, unsigned short hex);
 int rtas_ibm_suspend_me(int *fw_status);
 int rtas_error_rc(int rtas_rc);
 
 struct rtc_time;
-extern time64_t rtas_get_boot_time(void);
-extern void rtas_get_rtc_time(struct rtc_time *rtc_time);
-extern int rtas_set_rtc_time(struct rtc_time *rtc_time);
+time64_t rtas_get_boot_time(void);
+void rtas_get_rtc_time(struct rtc_time *rtc_time);
+int rtas_set_rtc_time(struct rtc_time *rtc_time);
 
-extern unsigned int rtas_busy_delay_time(int status);
+unsigned int rtas_busy_delay_time(int status);
 bool rtas_busy_delay(int status);
 
-extern int early_init_dt_scan_rtas(unsigned long node,
-		const char *uname, int depth, void *data);
+int early_init_dt_scan_rtas(unsigned long node, const char *uname, int depth, void *data);
 
-extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
+void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
 
 #ifdef CONFIG_PPC_PSERIES
 extern time64_t last_rtas_event;
-extern int clobbering_unread_rtas_event(void);
-extern void post_mobility_fixup(void);
+int clobbering_unread_rtas_event(void);
 int rtas_syscall_dispatch_ibm_suspend_me(u64 handle);
 #else
 static inline int clobbering_unread_rtas_event(void) { return 0; }
@@ -456,14 +467,14 @@ static inline int rtas_syscall_dispatch_ibm_suspend_me(u64 handle)
 #endif
 
 #ifdef CONFIG_PPC_RTAS_DAEMON
-extern void rtas_cancel_event_scan(void);
+void rtas_cancel_event_scan(void);
 #else
 static inline void rtas_cancel_event_scan(void) { }
 #endif
 
 /* Error types logged.  */
 #define ERR_FLAG_ALREADY_LOGGED	0x0
-#define ERR_FLAG_BOOT		0x1 	/* log was pulled from NVRAM on boot */
+#define ERR_FLAG_BOOT		0x1	/* log was pulled from NVRAM on boot */
 #define ERR_TYPE_RTAS_LOG	0x2	/* from rtas event-scan */
 #define ERR_TYPE_KERNEL_PANIC	0x4	/* from die()/panic() */
 #define ERR_TYPE_KERNEL_PANIC_GZ 0x8	/* ditto, compressed */
@@ -473,7 +484,7 @@ static inline void rtas_cancel_event_scan(void) { }
 	(ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC | ERR_TYPE_KERNEL_PANIC_GZ)
 
 #define RTAS_DEBUG KERN_DEBUG "RTAS: "
- 
+
 #define RTAS_ERROR_LOG_MAX 2048
 
 /*
@@ -481,7 +492,7 @@ static inline void rtas_cancel_event_scan(void) { }
  *  for all rtas calls that require an error buffer argument.
  *  This includes 'check-exception' and 'rtas-last-error'.
  */
-extern int rtas_get_error_log_max(void);
+int rtas_get_error_log_max(void);
 
 /* Event Scan Parameters */
 #define EVENT_SCAN_ALL_EVENTS	0xf0000000
@@ -502,6 +513,8 @@ extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];
 /* RMO buffer reserved for user-space RTAS use */
 extern unsigned long rtas_rmo_buf;
 
+extern struct mutex rtas_ibm_get_vpd_lock;
+
 #define GLOBAL_INTERRUPT_QUEUE 9005
 
 /**
@@ -520,8 +533,8 @@ static inline u32 rtas_config_addr(int busno, int devfn, int reg)
 			(devfn << 8) | (reg & 0xff);
 }
 
-extern void rtas_give_timebase(void);
-extern void rtas_take_timebase(void);
+void rtas_give_timebase(void);
+void rtas_take_timebase(void);
 
 #ifdef CONFIG_PPC_RTAS
 static inline int page_is_rtas_user_buf(unsigned long pfn)
@@ -534,7 +547,7 @@ static inline int page_is_rtas_user_buf(unsigned long pfn)
 
 /* Not the best place to put pSeries_coalesce_init, will be fixed when we
  * move some of the rtas suspend-me stuff to pseries */
-extern void pSeries_coalesce_init(void);
+void pSeries_coalesce_init(void);
 void rtas_initialize(void);
 #else
 static inline int page_is_rtas_user_buf(unsigned long pfn) { return 0;}
@@ -542,8 +555,6 @@ static inline void pSeries_coalesce_init(void) { }
 static inline void rtas_initialize(void) { }
 #endif
 
-extern int call_rtas(const char *, int, int, unsigned long *, ...);
-
 #ifdef CONFIG_HV_PERF_CTRS
 void read_24x7_sys_info(void);
 #else
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/sections.h linux-libre-6.8-gnu/arch/powerpc/include/asm/sections.h
index ea26665f82cf..f43f3a6b0051 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/sections.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/sections.h
@@ -14,6 +14,7 @@ typedef struct func_desc func_desc_t;
 
 extern char __head_end[];
 extern char __srwx_boundary[];
+extern char __exittext_begin[], __exittext_end[];
 
 /* Patch sites */
 extern s32 patch__call_flush_branch_caches1;
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/thread_info.h linux-libre-6.8-gnu/arch/powerpc/include/asm/thread_info.h
index bf5dde1a4114..15c5691dd218 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/thread_info.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/thread_info.h
@@ -14,7 +14,7 @@
 
 #ifdef __KERNEL__
 
-#ifdef CONFIG_KASAN
+#if defined(CONFIG_KASAN) && CONFIG_THREAD_SHIFT < 15
 #define MIN_THREAD_SHIFT	(CONFIG_THREAD_SHIFT + 1)
 #else
 #define MIN_THREAD_SHIFT	CONFIG_THREAD_SHIFT
diff --git linux-libre-6.7-gnu/arch/powerpc/include/asm/uaccess.h linux-libre-6.8-gnu/arch/powerpc/include/asm/uaccess.h
index f1f9890f50d3..de10437fd206 100644
--- linux-libre-6.7-gnu/arch/powerpc/include/asm/uaccess.h
+++ linux-libre-6.8-gnu/arch/powerpc/include/asm/uaccess.h
@@ -74,7 +74,7 @@ __pu_failed:							\
 /* -mprefixed can generate offsets beyond range, fall back hack */
 #ifdef CONFIG_PPC_KERNEL_PREFIXED
 #define __put_user_asm_goto(x, addr, label, op)			\
-	asm_volatile_goto(					\
+	asm goto(					\
 		"1:	" op " %0,0(%1)	# put_user\n"		\
 		EX_TABLE(1b, %l2)				\
 		:						\
@@ -83,7 +83,7 @@ __pu_failed:							\
 		: label)
 #else
 #define __put_user_asm_goto(x, addr, label, op)			\
-	asm_volatile_goto(					\
+	asm goto(					\
 		"1:	" op "%U1%X1 %0,%1	# put_user\n"	\
 		EX_TABLE(1b, %l2)				\
 		:						\
@@ -97,7 +97,7 @@ __pu_failed:							\
 	__put_user_asm_goto(x, ptr, label, "std")
 #else /* __powerpc64__ */
 #define __put_user_asm2_goto(x, addr, label)			\
-	asm_volatile_goto(					\
+	asm goto(					\
 		"1:	stw%X1 %0, %1\n"			\
 		"2:	stw%X1 %L0, %L1\n"			\
 		EX_TABLE(1b, %l2)				\
@@ -146,7 +146,7 @@ do {								\
 /* -mprefixed can generate offsets beyond range, fall back hack */
 #ifdef CONFIG_PPC_KERNEL_PREFIXED
 #define __get_user_asm_goto(x, addr, label, op)			\
-	asm_volatile_goto(					\
+	asm_goto_output(					\
 		"1:	"op" %0,0(%1)	# get_user\n"		\
 		EX_TABLE(1b, %l2)				\
 		: "=r" (x)					\
@@ -155,7 +155,7 @@ do {								\
 		: label)
 #else
 #define __get_user_asm_goto(x, addr, label, op)			\
-	asm_volatile_goto(					\
+	asm_goto_output(					\
 		"1:	"op"%U1%X1 %0, %1	# get_user\n"	\
 		EX_TABLE(1b, %l2)				\
 		: "=r" (x)					\
@@ -169,7 +169,7 @@ do {								\
 	__get_user_asm_goto(x, addr, label, "ld")
 #else /* __powerpc64__ */
 #define __get_user_asm2_goto(x, addr, label)			\
-	asm_volatile_goto(					\
+	asm_goto_output(					\
 		"1:	lwz%X1 %0, %1\n"			\
 		"2:	lwz%X1 %L0, %L1\n"			\
 		EX_TABLE(1b, %l2)				\
diff --git linux-libre-6.7-gnu/arch/powerpc/include/uapi/asm/papr-miscdev.h linux-libre-6.8-gnu/arch/powerpc/include/uapi/asm/papr-miscdev.h
new file mode 100644
index 000000000000..49a2a270b7f3
--- /dev/null
+++ linux-libre-6.8-gnu/arch/powerpc/include/uapi/asm/papr-miscdev.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_PAPR_MISCDEV_H_
+#define _UAPI_PAPR_MISCDEV_H_
+
+enum {
+	PAPR_MISCDEV_IOC_ID = 0xb2,
+};
+
+#endif /* _UAPI_PAPR_MISCDEV_H_ */
diff --git linux-libre-6.7-gnu/arch/powerpc/include/uapi/asm/papr-sysparm.h linux-libre-6.8-gnu/arch/powerpc/include/uapi/asm/papr-sysparm.h
new file mode 100644
index 000000000000..f733467b1534
--- /dev/null
+++ linux-libre-6.8-gnu/arch/powerpc/include/uapi/asm/papr-sysparm.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_PAPR_SYSPARM_H_
+#define _UAPI_PAPR_SYSPARM_H_
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+#include <asm/papr-miscdev.h>
+
+enum {
+	PAPR_SYSPARM_MAX_INPUT  = 1024,
+	PAPR_SYSPARM_MAX_OUTPUT = 4000,
+};
+
+struct papr_sysparm_io_block {
+	__u32 parameter;
+	__u16 length;
+	__u8 data[PAPR_SYSPARM_MAX_OUTPUT];
+};
+
+/**
+ * PAPR_SYSPARM_IOC_GET - Retrieve the value of a PAPR system parameter.
+ *
+ * Uses _IOWR because of one corner case: Retrieving the value of the
+ * "OS Service Entitlement Status" parameter (60) requires the caller
+ * to supply input data (a date string) in the buffer passed to
+ * firmware. So the @length and @data of the incoming
+ * papr_sysparm_io_block are always used to initialize the work area
+ * supplied to ibm,get-system-parameter. No other parameters are known
+ * to parameterize the result this way, and callers are encouraged
+ * (but not required) to zero-initialize @length and @data in the
+ * common case.
+ *
+ * On error the contents of the ioblock are indeterminate.
+ *
+ * Return:
+ * 0: Success; @length is the length of valid data in @data, not to exceed @PAPR_SYSPARM_MAX_OUTPUT.
+ * -EIO: Platform error. (-1)
+ * -EINVAL: Incorrect data length or format. (-9999)
+ * -EPERM: The calling partition is not allowed to access this parameter. (-9002)
+ * -EOPNOTSUPP: Parameter not supported on this platform (-3)
+ */
+#define PAPR_SYSPARM_IOC_GET _IOWR(PAPR_MISCDEV_IOC_ID, 1, struct papr_sysparm_io_block)
+
+/**
+ * PAPR_SYSPARM_IOC_SET - Update the value of a PAPR system parameter.
+ *
+ * The contents of the ioblock are unchanged regardless of success.
+ *
+ * Return:
+ * 0: Success; the parameter has been updated.
+ * -EIO: Platform error. (-1)
+ * -EINVAL: Incorrect data length or format. (-9999)
+ * -EPERM: The calling partition is not allowed to access this parameter. (-9002)
+ * -EOPNOTSUPP: Parameter not supported on this platform (-3)
+ */
+#define PAPR_SYSPARM_IOC_SET _IOW(PAPR_MISCDEV_IOC_ID, 2, struct papr_sysparm_io_block)
+
+#endif /* _UAPI_PAPR_SYSPARM_H_ */
diff --git linux-libre-6.7-gnu/arch/powerpc/include/uapi/asm/papr-vpd.h linux-libre-6.8-gnu/arch/powerpc/include/uapi/asm/papr-vpd.h
new file mode 100644
index 000000000000..1c88e87cb420
--- /dev/null
+++ linux-libre-6.8-gnu/arch/powerpc/include/uapi/asm/papr-vpd.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_PAPR_VPD_H_
+#define _UAPI_PAPR_VPD_H_
+
+#include <asm/ioctl.h>
+#include <asm/papr-miscdev.h>
+
+struct papr_location_code {
+	/*
+	 * PAPR+ v2.13 12.3.2.4 Converged Location Code Rules - Length
+	 * Restrictions. 79 characters plus nul.
+	 */
+	char str[80];
+};
+
+/*
+ * ioctl for /dev/papr-vpd. Returns a VPD handle fd corresponding to
+ * the location code.
+ */
+#define PAPR_VPD_IOC_CREATE_HANDLE _IOW(PAPR_MISCDEV_IOC_ID, 0, struct papr_location_code)
+
+#endif /* _UAPI_PAPR_VPD_H_ */
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/cpu_setup_6xx.S linux-libre-6.8-gnu/arch/powerpc/kernel/cpu_setup_6xx.S
index f29ce3dd6140..bfd3f442e5eb 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/cpu_setup_6xx.S
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -26,6 +26,15 @@ BEGIN_FTR_SECTION
 	bl	__init_fpu_registers
 END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)
 	bl	setup_common_caches
+
+	/*
+	 * This assumes that all cores using __setup_cpu_603 with
+	 * MMU_FTR_USE_HIGH_BATS are G2_LE compatible
+	 */
+BEGIN_MMU_FTR_SECTION
+	bl      setup_g2_le_hid2
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
+
 	mtlr	r5
 	blr
 _GLOBAL(__setup_cpu_604)
@@ -115,6 +124,16 @@ SYM_FUNC_START_LOCAL(setup_604_hid0)
 	blr
 SYM_FUNC_END(setup_604_hid0)
 
+/* Enable high BATs for G2_LE and derivatives like e300cX */
+SYM_FUNC_START_LOCAL(setup_g2_le_hid2)
+	mfspr	r11,SPRN_HID2_G2_LE
+	oris	r11,r11,HID2_G2_LE_HBE@h
+	mtspr	SPRN_HID2_G2_LE,r11
+	sync
+	isync
+	blr
+SYM_FUNC_END(setup_g2_le_hid2)
+
 /* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
  * erratas we work around here.
  * Moto MPC710CE.pdf describes them, those are errata
@@ -495,4 +514,3 @@ _GLOBAL(__restore_cpu_setup)
 	mtcr	r7
 	blr
 _ASM_NOKPROBE_SYMBOL(__restore_cpu_setup)
-
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/cpu_specs_book3s_64.h linux-libre-6.8-gnu/arch/powerpc/kernel/cpu_specs_book3s_64.h
index c370c1b804a9..3ff9757df4c0 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/cpu_specs_book3s_64.h
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/cpu_specs_book3s_64.h
@@ -238,6 +238,21 @@ static struct cpu_spec cpu_specs[] __initdata = {
 		.machine_check_early	= __machine_check_early_realmode_p8,
 		.platform		= "power8",
 	},
+	{	/* 2.07-compliant processor, HeXin C2000 processor */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00660000,
+		.cpu_name		= "HX-C2000",
+		.cpu_features		= CPU_FTRS_POWER8,
+		.cpu_user_features	= COMMON_USER_POWER8,
+		.cpu_user_features2	= COMMON_USER2_POWER8,
+		.mmu_features		= MMU_FTRS_POWER8,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.cpu_setup		= __setup_cpu_power8,
+		.cpu_restore		= __restore_cpu_power8,
+		.machine_check_early	= __machine_check_early_realmode_p8,
+		.platform		= "power8",
+	},
 	{	/* 3.00-compliant processor, i.e. Power9 "architected" mode */
 		.pvr_mask		= 0xffffffff,
 		.pvr_value		= 0x0f000005,
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/cpu_specs_e500mc.h linux-libre-6.8-gnu/arch/powerpc/kernel/cpu_specs_e500mc.h
index ceb06b109f83..2ae8e9a7b461 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/cpu_specs_e500mc.h
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/cpu_specs_e500mc.h
@@ -8,7 +8,8 @@
 
 #ifdef CONFIG_PPC64
 #define COMMON_USER_BOOKE	(PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
-				 PPC_FEATURE_HAS_FPU | PPC_FEATURE_64)
+				 PPC_FEATURE_HAS_FPU | PPC_FEATURE_64 | \
+				 PPC_FEATURE_BOOKE)
 #else
 #define COMMON_USER_BOOKE	(PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
 				 PPC_FEATURE_BOOKE)
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/cputable.c linux-libre-6.8-gnu/arch/powerpc/kernel/cputable.c
index e97a0fd0ae90..6f6801da9dc1 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/cputable.c
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/cputable.c
@@ -20,9 +20,9 @@
 #include <asm/setup.h>
 #include <asm/cpu_setup.h>
 
-static struct cpu_spec the_cpu_spec __read_mostly;
+static struct cpu_spec the_cpu_spec __ro_after_init;
 
-struct cpu_spec* cur_cpu_spec __read_mostly = NULL;
+struct cpu_spec *cur_cpu_spec __ro_after_init = NULL;
 EXPORT_SYMBOL(cur_cpu_spec);
 
 /* The platform string corresponding to the real PVR */
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/exceptions-64e.S linux-libre-6.8-gnu/arch/powerpc/kernel/exceptions-64e.S
index 7ab4c8c0f1ab..dcf0591ad3c2 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/exceptions-64e.S
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/exceptions-64e.S
@@ -14,7 +14,6 @@
 #include <asm/cputable.h>
 #include <asm/setup.h>
 #include <asm/thread_info.h>
-#include <asm/reg_a2.h>
 #include <asm/exception-64e.h>
 #include <asm/bug.h>
 #include <asm/irqflags.h>
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/firmware.c linux-libre-6.8-gnu/arch/powerpc/kernel/firmware.c
index 20328f72f9f2..8987eee33dc8 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/firmware.c
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/firmware.c
@@ -23,6 +23,8 @@ EXPORT_SYMBOL_GPL(powerpc_firmware_features);
 
 #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST)
 DEFINE_STATIC_KEY_FALSE(kvm_guest);
+EXPORT_SYMBOL_GPL(kvm_guest);
+
 int __init check_kvm_guest(void)
 {
 	struct device_node *hyper_node;
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/interrupt.c linux-libre-6.8-gnu/arch/powerpc/kernel/interrupt.c
index c4f6d3c69ba9..eca293794a1e 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/interrupt.c
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/interrupt.c
@@ -3,6 +3,7 @@
 #include <linux/context_tracking.h>
 #include <linux/err.h>
 #include <linux/compat.h>
+#include <linux/rseq.h>
 #include <linux/sched/debug.h> /* for show_regs */
 
 #include <asm/kup.h>
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/interrupt_64.S linux-libre-6.8-gnu/arch/powerpc/kernel/interrupt_64.S
index bd863702d812..1ad059a9e2fe 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/interrupt_64.S
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/interrupt_64.S
@@ -52,7 +52,8 @@ _ASM_NOKPROBE_SYMBOL(system_call_vectored_\name)
 	mr	r10,r1
 	ld	r1,PACAKSAVE(r13)
 	std	r10,0(r1)
-	std	r11,_NIP(r1)
+	std	r11,_LINK(r1)
+	std	r11,_NIP(r1)	/* Saved LR is also the next instruction */
 	std	r12,_MSR(r1)
 	std	r0,GPR0(r1)
 	std	r10,GPR1(r1)
@@ -70,7 +71,6 @@ _ASM_NOKPROBE_SYMBOL(system_call_vectored_\name)
 	std	r9,GPR13(r1)
 	SAVE_NVGPRS(r1)
 	std	r11,_XER(r1)
-	std	r11,_LINK(r1)
 	std	r11,_CTR(r1)
 
 	li	r11,\trapnr
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/iommu.c linux-libre-6.8-gnu/arch/powerpc/kernel/iommu.c
index ebe259bdd462..1185efebf032 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/iommu.c
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/iommu.c
@@ -1287,20 +1287,22 @@ spapr_tce_platform_iommu_attach_dev(struct iommu_domain *platform_domain,
 	struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
 	struct iommu_group *grp = iommu_group_get(dev);
 	struct iommu_table_group *table_group;
-	int ret = -EINVAL;
 
 	/* At first attach the ownership is already set */
-	if (!domain)
+	if (!domain) {
+		iommu_group_put(grp);
 		return 0;
-
-	if (!grp)
-		return -ENODEV;
+	}
 
 	table_group = iommu_group_get_iommudata(grp);
-	ret = table_group->ops->take_ownership(table_group);
+	/*
+	 * The domain being set to PLATFORM from earlier
+	 * BLOCKED. The table_group ownership has to be released.
+	 */
+	table_group->ops->release_ownership(table_group);
 	iommu_group_put(grp);
 
-	return ret;
+	return 0;
 }
 
 static const struct iommu_domain_ops spapr_tce_platform_domain_ops = {
@@ -1312,13 +1314,32 @@ static struct iommu_domain spapr_tce_platform_domain = {
 	.ops = &spapr_tce_platform_domain_ops,
 };
 
-static struct iommu_domain spapr_tce_blocked_domain = {
-	.type = IOMMU_DOMAIN_BLOCKED,
+static int
+spapr_tce_blocked_iommu_attach_dev(struct iommu_domain *platform_domain,
+				     struct device *dev)
+{
+	struct iommu_group *grp = iommu_group_get(dev);
+	struct iommu_table_group *table_group;
+	int ret = -EINVAL;
+
 	/*
 	 * FIXME: SPAPR mixes blocked and platform behaviors, the blocked domain
 	 * also sets the dma_api ops
 	 */
-	.ops = &spapr_tce_platform_domain_ops,
+	table_group = iommu_group_get_iommudata(grp);
+	ret = table_group->ops->take_ownership(table_group);
+	iommu_group_put(grp);
+
+	return ret;
+}
+
+static const struct iommu_domain_ops spapr_tce_blocked_domain_ops = {
+	.attach_dev = spapr_tce_blocked_iommu_attach_dev,
+};
+
+static struct iommu_domain spapr_tce_blocked_domain = {
+	.type = IOMMU_DOMAIN_BLOCKED,
+	.ops = &spapr_tce_blocked_domain_ops,
 };
 
 static bool spapr_tce_iommu_capable(struct device *dev, enum iommu_cap cap)
@@ -1339,7 +1360,7 @@ static struct iommu_device *spapr_tce_iommu_probe_device(struct device *dev)
 	struct pci_controller *hose;
 
 	if (!dev_is_pci(dev))
-		return ERR_PTR(-EPERM);
+		return ERR_PTR(-ENODEV);
 
 	pdev = to_pci_dev(dev);
 	hose = pdev->bus->sysdata;
@@ -1388,6 +1409,21 @@ static const struct attribute_group *spapr_tce_iommu_groups[] = {
 	NULL,
 };
 
+void ppc_iommu_register_device(struct pci_controller *phb)
+{
+	iommu_device_sysfs_add(&phb->iommu, phb->parent,
+				spapr_tce_iommu_groups, "iommu-phb%04x",
+				phb->global_number);
+	iommu_device_register(&phb->iommu, &spapr_tce_iommu_ops,
+				phb->parent);
+}
+
+void ppc_iommu_unregister_device(struct pci_controller *phb)
+{
+	iommu_device_unregister(&phb->iommu);
+	iommu_device_sysfs_remove(&phb->iommu);
+}
+
 /*
  * This registers IOMMU devices of PHBs. This needs to happen
  * after core_initcall(iommu_init) + postcore_initcall(pci_driver_init) and
@@ -1398,11 +1434,7 @@ static int __init spapr_tce_setup_phb_iommus_initcall(void)
 	struct pci_controller *hose;
 
 	list_for_each_entry(hose, &hose_list, list_node) {
-		iommu_device_sysfs_add(&hose->iommu, hose->parent,
-				       spapr_tce_iommu_groups, "iommu-phb%04x",
-				       hose->global_number);
-		iommu_device_register(&hose->iommu, &spapr_tce_iommu_ops,
-				      hose->parent);
+		ppc_iommu_register_device(hose);
 	}
 	return 0;
 }
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/irq_64.c linux-libre-6.8-gnu/arch/powerpc/kernel/irq_64.c
index 938e66829eae..d5c48d1b0a31 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/irq_64.c
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/irq_64.c
@@ -230,7 +230,7 @@ again:
 	 * This allows interrupts to be unmasked without hard disabling, and
 	 * also without new hard interrupts coming in ahead of pending ones.
 	 */
-	asm_volatile_goto(
+	asm goto(
 "1:					\n"
 "		lbz	9,%0(13)	\n"
 "		cmpwi	9,0		\n"
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/rtas.c linux-libre-6.8-gnu/arch/powerpc/kernel/rtas.c
index eddc031c4b95..8064d9c3de86 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/rtas.c
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/rtas.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/lockdep.h>
 #include <linux/memblock.h>
+#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <linux/reboot.h>
@@ -70,14 +71,33 @@ struct rtas_filter {
  *                            ppc64le, and we want to keep it that way. It does
  *                            not make sense for this to be set when @filter
  *                            is NULL.
+ * @lock: Pointer to an optional dedicated per-function mutex. This
+ *        should be set for functions that require multiple calls in
+ *        sequence to complete a single operation, and such sequences
+ *        will disrupt each other if allowed to interleave. Users of
+ *        this function are required to hold the associated lock for
+ *        the duration of the call sequence. Add an explanatory
+ *        comment to the function table entry if setting this member.
  */
 struct rtas_function {
 	s32 token;
 	const bool banned_for_syscall_on_le:1;
 	const char * const name;
 	const struct rtas_filter *filter;
+	struct mutex *lock;
 };
 
+/*
+ * Per-function locks for sequence-based RTAS functions.
+ */
+static DEFINE_MUTEX(rtas_ibm_activate_firmware_lock);
+static DEFINE_MUTEX(rtas_ibm_get_dynamic_sensor_state_lock);
+static DEFINE_MUTEX(rtas_ibm_get_indices_lock);
+static DEFINE_MUTEX(rtas_ibm_lpar_perftools_lock);
+static DEFINE_MUTEX(rtas_ibm_physical_attestation_lock);
+static DEFINE_MUTEX(rtas_ibm_set_dynamic_indicator_lock);
+DEFINE_MUTEX(rtas_ibm_get_vpd_lock);
+
 static struct rtas_function rtas_function_table[] __ro_after_init = {
 	[RTAS_FNIDX__CHECK_EXCEPTION] = {
 		.name = "check-exception",
@@ -125,6 +145,13 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = -1, .size_idx1 = -1,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * PAPR+ as of v2.13 doesn't explicitly impose any
+		 * restriction, but this typically requires multiple
+		 * calls before success, and there's no reason to
+		 * allow sequences to interleave.
+		 */
+		.lock = &rtas_ibm_activate_firmware_lock,
 	},
 	[RTAS_FNIDX__IBM_CBE_START_PTCAL] = {
 		.name = "ibm,cbe-start-ptcal",
@@ -196,6 +223,13 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 1, .size_idx1 = -1,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * PAPR+ v2.13 R1–7.3.19–3 is explicit that the OS
+		 * must not call ibm,get-dynamic-sensor-state with
+		 * different inputs until a non-retry status has been
+		 * returned.
+		 */
+		.lock = &rtas_ibm_get_dynamic_sensor_state_lock,
 	},
 	[RTAS_FNIDX__IBM_GET_INDICES] = {
 		.name = "ibm,get-indices",
@@ -203,6 +237,12 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 2, .size_idx1 = 3,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * PAPR+ v2.13 R1–7.3.17–2 says that the OS must not
+		 * interleave ibm,get-indices call sequences with
+		 * different inputs.
+		 */
+		.lock = &rtas_ibm_get_indices_lock,
 	},
 	[RTAS_FNIDX__IBM_GET_RIO_TOPOLOGY] = {
 		.name = "ibm,get-rio-topology",
@@ -220,6 +260,11 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 0, .size_idx1 = -1,
 			.buf_idx2 = 1, .size_idx2 = 2,
 		},
+		/*
+		 * PAPR+ v2.13 R1–7.3.20–4 indicates that sequences
+		 * should not be allowed to interleave.
+		 */
+		.lock = &rtas_ibm_get_vpd_lock,
 	},
 	[RTAS_FNIDX__IBM_GET_XIVE] = {
 		.name = "ibm,get-xive",
@@ -239,6 +284,11 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 2, .size_idx1 = 3,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * PAPR+ v2.13 R1–7.3.26–6 says the OS should allow
+		 * only one call sequence in progress at a time.
+		 */
+		.lock = &rtas_ibm_lpar_perftools_lock,
 	},
 	[RTAS_FNIDX__IBM_MANAGE_FLASH_IMAGE] = {
 		.name = "ibm,manage-flash-image",
@@ -277,6 +327,14 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 0, .size_idx1 = 1,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * This follows a sequence-based pattern similar to
+		 * ibm,get-vpd et al. Since PAPR+ restricts
+		 * interleaving call sequences for other functions of
+		 * this style, assume the restriction applies here,
+		 * even though it's not explicit in the spec.
+		 */
+		.lock = &rtas_ibm_physical_attestation_lock,
 	},
 	[RTAS_FNIDX__IBM_PLATFORM_DUMP] = {
 		.name = "ibm,platform-dump",
@@ -284,6 +342,13 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 4, .size_idx1 = 5,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * PAPR+ v2.13 7.3.3.4.1 indicates that concurrent
+		 * sequences of ibm,platform-dump are allowed if they
+		 * are operating on different dump tags. So leave the
+		 * lock pointer unset for now. This may need
+		 * reconsideration if kernel-internal users appear.
+		 */
 	},
 	[RTAS_FNIDX__IBM_POWER_OFF_UPS] = {
 		.name = "ibm,power-off-ups",
@@ -310,8 +375,13 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 	[RTAS_FNIDX__IBM_REMOVE_PE_DMA_WINDOW] = {
 		.name = "ibm,remove-pe-dma-window",
 	},
-	[RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOWS] = {
-		.name = "ibm,reset-pe-dma-windows",
+	[RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOW] = {
+		/*
+		 * Note: PAPR+ v2.13 7.3.31.4.1 spells this as
+		 * "ibm,reset-pe-dma-windows" (plural), but RTAS
+		 * implementations use the singular form in practice.
+		 */
+		.name = "ibm,reset-pe-dma-window",
 	},
 	[RTAS_FNIDX__IBM_SCAN_LOG_DUMP] = {
 		.name = "ibm,scan-log-dump",
@@ -326,6 +396,12 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx1 = 2, .size_idx1 = -1,
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
+		/*
+		 * PAPR+ v2.13 R1–7.3.18–3 says the OS must not call
+		 * this function with different inputs until a
+		 * non-retry status has been returned.
+		 */
+		.lock = &rtas_ibm_set_dynamic_indicator_lock,
 	},
 	[RTAS_FNIDX__IBM_SET_EEH_OPTION] = {
 		.name = "ibm,set-eeh-option",
@@ -454,6 +530,11 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 	},
 };
 
+#define for_each_rtas_function(funcp)                                       \
+	for (funcp = &rtas_function_table[0];                               \
+	     funcp < &rtas_function_table[ARRAY_SIZE(rtas_function_table)]; \
+	     ++funcp)
+
 /*
  * Nearly all RTAS calls need to be serialized. All uses of the
  * default rtas_args block must hold rtas_lock.
@@ -525,10 +606,10 @@ static DEFINE_XARRAY(rtas_token_to_function_xarray);
 
 static int __init rtas_token_to_function_xarray_init(void)
 {
+	const struct rtas_function *func;
 	int err = 0;
 
-	for (size_t i = 0; i < ARRAY_SIZE(rtas_function_table); ++i) {
-		const struct rtas_function *func = &rtas_function_table[i];
+	for_each_rtas_function(func) {
 		const s32 token = func->token;
 
 		if (token == RTAS_UNKNOWN_SERVICE)
@@ -544,6 +625,21 @@ static int __init rtas_token_to_function_xarray_init(void)
 }
 arch_initcall(rtas_token_to_function_xarray_init);
 
+/*
+ * For use by sys_rtas(), where the token value is provided by user
+ * space and we don't want to warn on failed lookups.
+ */
+static const struct rtas_function *rtas_token_to_function_untrusted(s32 token)
+{
+	return xa_load(&rtas_token_to_function_xarray, token);
+}
+
+/*
+ * Reverse lookup for deriving the function descriptor from a
+ * known-good token value in contexts where the former is not already
+ * available. @token must be valid, e.g. derived from the result of a
+ * prior lookup against the function table.
+ */
 static const struct rtas_function *rtas_token_to_function(s32 token)
 {
 	const struct rtas_function *func;
@@ -551,12 +647,22 @@ static const struct rtas_function *rtas_token_to_function(s32 token)
 	if (WARN_ONCE(token < 0, "invalid token %d", token))
 		return NULL;
 
-	func = xa_load(&rtas_token_to_function_xarray, token);
-
-	if (WARN_ONCE(!func, "unexpected failed lookup for token %d", token))
-		return NULL;
+	func = rtas_token_to_function_untrusted(token);
+	if (func)
+		return func;
+	/*
+	 * Fall back to linear scan in case the reverse mapping hasn't
+	 * been initialized yet.
+	 */
+	if (xa_empty(&rtas_token_to_function_xarray)) {
+		for_each_rtas_function(func) {
+			if (func->token == token)
+				return func;
+		}
+	}
 
-	return func;
+	WARN_ONCE(true, "unexpected failed lookup for token %d", token);
+	return NULL;
 }
 
 /* This is here deliberately so it's only used in this file */
@@ -570,28 +676,25 @@ static void __do_enter_rtas(struct rtas_args *args)
 
 static void __do_enter_rtas_trace(struct rtas_args *args)
 {
-	const char *name = NULL;
+	const struct rtas_function *func = rtas_token_to_function(be32_to_cpu(args->token));
 
-	if (args == &rtas_args)
-		lockdep_assert_held(&rtas_lock);
 	/*
-	 * If the tracepoints that consume the function name aren't
-	 * active, avoid the lookup.
+	 * If there is a per-function lock, it must be held by the
+	 * caller.
 	 */
-	if ((trace_rtas_input_enabled() || trace_rtas_output_enabled())) {
-		const s32 token = be32_to_cpu(args->token);
-		const struct rtas_function *func = rtas_token_to_function(token);
+	if (func->lock)
+		lockdep_assert_held(func->lock);
 
-		name = func->name;
-	}
+	if (args == &rtas_args)
+		lockdep_assert_held(&rtas_lock);
 
-	trace_rtas_input(args, name);
+	trace_rtas_input(args, func->name);
 	trace_rtas_ll_entry(args);
 
 	__do_enter_rtas(args);
 
 	trace_rtas_ll_exit(args);
-	trace_rtas_output(args, name);
+	trace_rtas_output(args, func->name);
 }
 
 static void do_enter_rtas(struct rtas_args *args)
@@ -670,7 +773,7 @@ static void call_rtas_display_status_delay(char c)
 	static int pending_newline = 0;  /* did last write end with unprinted newline? */
 	static int width = 16;
 
-	if (c == '\n') {	
+	if (c == '\n') {
 		while (width-- > 0)
 			call_rtas_display_status(' ');
 		width = 16;
@@ -680,7 +783,7 @@ static void call_rtas_display_status_delay(char c)
 		if (pending_newline) {
 			call_rtas_display_status('\r');
 			call_rtas_display_status('\n');
-		} 
+		}
 		pending_newline = 0;
 		if (width--) {
 			call_rtas_display_status(c);
@@ -820,7 +923,7 @@ void rtas_progress(char *s, unsigned short hex)
 		else
 			rtas_call(display_character, 1, 1, NULL, '\r');
 	}
- 
+
 	if (row_width)
 		width = row_width[current_line];
 	else
@@ -840,9 +943,9 @@ void rtas_progress(char *s, unsigned short hex)
 				spin_unlock(&progress_lock);
 				return;
 			}
- 
+
 			/* RTAS wants CR-LF, not just LF */
- 
+
 			if (*os == '\n') {
 				rtas_call(display_character, 1, 1, NULL, '\r');
 				rtas_call(display_character, 1, 1, NULL, '\n');
@@ -852,7 +955,7 @@ void rtas_progress(char *s, unsigned short hex)
 				 */
 				rtas_call(display_character, 1, 1, NULL, *os);
 			}
- 
+
 			if (row_width)
 				width = row_width[current_line];
 			else
@@ -861,15 +964,15 @@ void rtas_progress(char *s, unsigned short hex)
 			width--;
 			rtas_call(display_character, 1, 1, NULL, *os);
 		}
- 
+
 		os++;
- 
+
 		/* if we overwrite the screen length */
 		if (width <= 0)
 			while ((*os != 0) && (*os != '\n') && (*os != '\r'))
 				os++;
 	}
- 
+
 	spin_unlock(&progress_lock);
 }
 EXPORT_SYMBOL_GPL(rtas_progress);		/* needed by rtas_flash module */
@@ -900,11 +1003,6 @@ int rtas_token(const char *service)
 }
 EXPORT_SYMBOL_GPL(rtas_token);
 
-int rtas_service_present(const char *service)
-{
-	return rtas_token(service) != RTAS_UNKNOWN_SERVICE;
-}
-
 #ifdef CONFIG_RTAS_ERROR_LOGGING
 
 static u32 rtas_error_log_max __ro_after_init = RTAS_ERROR_LOG_MAX;
@@ -1638,10 +1736,14 @@ void rtas_activate_firmware(void)
 		return;
 	}
 
+	mutex_lock(&rtas_ibm_activate_firmware_lock);
+
 	do {
 		fwrc = rtas_call(token, 0, 1, NULL);
 	} while (rtas_busy_delay(fwrc));
 
+	mutex_unlock(&rtas_ibm_activate_firmware_lock);
+
 	if (fwrc)
 		pr_err("ibm,activate-firmware failed (%i)\n", fwrc);
 }
@@ -1713,24 +1815,18 @@ static bool in_rmo_buf(u32 base, u32 end)
 		end < (rtas_rmo_buf + RTAS_USER_REGION_SIZE);
 }
 
-static bool block_rtas_call(int token, int nargs,
+static bool block_rtas_call(const struct rtas_function *func, int nargs,
 			    struct rtas_args *args)
 {
-	const struct rtas_function *func;
 	const struct rtas_filter *f;
-	const bool is_platform_dump = token == rtas_function_token(RTAS_FN_IBM_PLATFORM_DUMP);
-	const bool is_config_conn = token == rtas_function_token(RTAS_FN_IBM_CONFIGURE_CONNECTOR);
+	const bool is_platform_dump =
+		func == &rtas_function_table[RTAS_FNIDX__IBM_PLATFORM_DUMP];
+	const bool is_config_conn =
+		func == &rtas_function_table[RTAS_FNIDX__IBM_CONFIGURE_CONNECTOR];
 	u32 base, size, end;
 
 	/*
-	 * If this token doesn't correspond to a function the kernel
-	 * understands, you're not allowed to call it.
-	 */
-	func = rtas_token_to_function(token);
-	if (!func)
-		goto err;
-	/*
-	 * And only functions with filters attached are allowed.
+	 * Only functions with filters attached are allowed.
 	 */
 	f = func->filter;
 	if (!f)
@@ -1787,14 +1883,15 @@ static bool block_rtas_call(int token, int nargs,
 	return false;
 err:
 	pr_err_ratelimited("sys_rtas: RTAS call blocked - exploit attempt?\n");
-	pr_err_ratelimited("sys_rtas: token=0x%x, nargs=%d (called by %s)\n",
-			   token, nargs, current->comm);
+	pr_err_ratelimited("sys_rtas: %s nargs=%d (called by %s)\n",
+			   func->name, nargs, current->comm);
 	return true;
 }
 
 /* We assume to be passed big endian arguments */
 SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs)
 {
+	const struct rtas_function *func;
 	struct pin_cookie cookie;
 	struct rtas_args args;
 	unsigned long flags;
@@ -1824,13 +1921,18 @@ SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs)
 			   nargs * sizeof(rtas_arg_t)) != 0)
 		return -EFAULT;
 
-	if (token == RTAS_UNKNOWN_SERVICE)
+	/*
+	 * If this token doesn't correspond to a function the kernel
+	 * understands, you're not allowed to call it.
+	 */
+	func = rtas_token_to_function_untrusted(token);
+	if (!func)
 		return -EINVAL;
 
 	args.rets = &args.args[nargs];
 	memset(args.rets, 0, nret * sizeof(rtas_arg_t));
 
-	if (block_rtas_call(token, nargs, &args))
+	if (block_rtas_call(func, nargs, &args))
 		return -EINVAL;
 
 	if (token_is_restricted_errinjct(token)) {
@@ -1863,6 +1965,15 @@ SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs)
 
 	buff_copy = get_errorlog_buffer();
 
+	/*
+	 * If this function has a mutex assigned to it, we must
+	 * acquire it to avoid interleaving with any kernel-based uses
+	 * of the same function. Kernel-based sequences acquire the
+	 * appropriate mutex explicitly.
+	 */
+	if (func->lock)
+		mutex_lock(func->lock);
+
 	raw_spin_lock_irqsave(&rtas_lock, flags);
 	cookie = lockdep_pin_lock(&rtas_lock);
 
@@ -1878,6 +1989,9 @@ SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs)
 	lockdep_unpin_lock(&rtas_lock, cookie);
 	raw_spin_unlock_irqrestore(&rtas_lock, flags);
 
+	if (func->lock)
+		mutex_unlock(func->lock);
+
 	if (buff_copy) {
 		if (errbuf)
 			log_error(errbuf, ERR_TYPE_RTAS_LOG, 0);
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/rtas_pci.c linux-libre-6.8-gnu/arch/powerpc/kernel/rtas_pci.c
index e1fdc7473b72..fccf96e897f6 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/rtas_pci.c
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/rtas_pci.c
@@ -43,7 +43,7 @@ static inline int config_access_valid(struct pci_dn *dn, int where)
 	return 0;
 }
 
-int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
+int rtas_pci_dn_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
 {
 	int returnval = -1;
 	unsigned long buid, addr;
@@ -87,7 +87,7 @@ static int rtas_pci_read_config(struct pci_bus *bus,
 	pdn = pci_get_pdn_by_devfn(bus, devfn);
 
 	/* Validity of pdn is checked in here */
-	ret = rtas_read_config(pdn, where, size, val);
+	ret = rtas_pci_dn_read_config(pdn, where, size, val);
 	if (*val == EEH_IO_ERROR_VALUE(size) &&
 	    eeh_dev_check_failure(pdn_to_eeh_dev(pdn)))
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -95,7 +95,7 @@ static int rtas_pci_read_config(struct pci_bus *bus,
 	return ret;
 }
 
-int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val)
+int rtas_pci_dn_write_config(struct pci_dn *pdn, int where, int size, u32 val)
 {
 	unsigned long buid, addr;
 	int ret;
@@ -134,7 +134,7 @@ static int rtas_pci_write_config(struct pci_bus *bus,
 	pdn = pci_get_pdn_by_devfn(bus, devfn);
 
 	/* Validity of pdn is checked in here. */
-	return rtas_write_config(pdn, where, size, val);
+	return rtas_pci_dn_write_config(pdn, where, size, val);
 }
 
 static struct pci_ops rtas_pci_ops = {
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/smp.c linux-libre-6.8-gnu/arch/powerpc/kernel/smp.c
index ab691c89d787..693334c20d07 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/smp.c
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/smp.c
@@ -77,10 +77,10 @@ static DEFINE_PER_CPU(int, cpu_state) = { 0 };
 #endif
 
 struct task_struct *secondary_current;
-bool has_big_cores;
-bool coregroup_enabled;
-bool thread_group_shares_l2;
-bool thread_group_shares_l3;
+bool has_big_cores __ro_after_init;
+bool coregroup_enabled __ro_after_init;
+bool thread_group_shares_l2 __ro_after_init;
+bool thread_group_shares_l3 __ro_after_init;
 
 DEFINE_PER_CPU(cpumask_var_t, cpu_sibling_map);
 DEFINE_PER_CPU(cpumask_var_t, cpu_smallcore_map);
@@ -93,15 +93,6 @@ EXPORT_PER_CPU_SYMBOL(cpu_l2_cache_map);
 EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 EXPORT_SYMBOL_GPL(has_big_cores);
 
-enum {
-#ifdef CONFIG_SCHED_SMT
-	smt_idx,
-#endif
-	cache_idx,
-	mc_idx,
-	die_idx,
-};
-
 #define MAX_THREAD_LIST_SIZE	8
 #define THREAD_GROUP_SHARE_L1   1
 #define THREAD_GROUP_SHARE_L2_L3 2
@@ -987,7 +978,7 @@ static int __init init_thread_group_cache_map(int cpu, int cache_property)
 	return 0;
 }
 
-static bool shared_caches;
+static bool shared_caches __ro_after_init;
 
 #ifdef CONFIG_SCHED_SMT
 /* cpumask of CPUs with asymmetric SMT dependency */
@@ -1003,6 +994,13 @@ static int powerpc_smt_flags(void)
 }
 #endif
 
+/*
+ * On shared processor LPARs scheduled on a big core (which has two or more
+ * independent thread groups per core), prefer lower numbered CPUs, so
+ * that workload consolidates to lesser number of cores.
+ */
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(splpar_asym_pack);
+
 /*
  * P9 has a slightly odd architecture where pairs of cores share an L2 cache.
  * This topology makes it *much* cheaper to migrate tasks between adjacent cores
@@ -1011,9 +1009,20 @@ static int powerpc_smt_flags(void)
  */
 static int powerpc_shared_cache_flags(void)
 {
+	if (static_branch_unlikely(&splpar_asym_pack))
+		return SD_SHARE_PKG_RESOURCES | SD_ASYM_PACKING;
+
 	return SD_SHARE_PKG_RESOURCES;
 }
 
+static int powerpc_shared_proc_flags(void)
+{
+	if (static_branch_unlikely(&splpar_asym_pack))
+		return SD_ASYM_PACKING;
+
+	return 0;
+}
+
 /*
  * We can't just pass cpu_l2_cache_mask() directly because
  * returns a non-const pointer and the compiler barfs on that.
@@ -1037,6 +1046,10 @@ static struct cpumask *cpu_coregroup_mask(int cpu)
 
 static bool has_coregroup_support(void)
 {
+	/* Coregroup identification not available on shared systems */
+	if (is_shared_processor())
+		return 0;
+
 	return coregroup_enabled;
 }
 
@@ -1045,16 +1058,6 @@ static const struct cpumask *cpu_mc_mask(int cpu)
 	return cpu_coregroup_mask(cpu);
 }
 
-static struct sched_domain_topology_level powerpc_topology[] = {
-#ifdef CONFIG_SCHED_SMT
-	{ cpu_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT) },
-#endif
-	{ shared_cache_mask, powerpc_shared_cache_flags, SD_INIT_NAME(CACHE) },
-	{ cpu_mc_mask, SD_INIT_NAME(MC) },
-	{ cpu_cpu_mask, SD_INIT_NAME(PKG) },
-	{ NULL, },
-};
-
 static int __init init_big_cores(void)
 {
 	int cpu;
@@ -1682,43 +1685,45 @@ void start_secondary(void *unused)
 	BUG();
 }
 
-static void __init fixup_topology(void)
+static struct sched_domain_topology_level powerpc_topology[6];
+
+static void __init build_sched_topology(void)
 {
-	int i;
+	int i = 0;
+
+	if (is_shared_processor() && has_big_cores)
+		static_branch_enable(&splpar_asym_pack);
 
 #ifdef CONFIG_SCHED_SMT
 	if (has_big_cores) {
 		pr_info("Big cores detected but using small core scheduling\n");
-		powerpc_topology[smt_idx].mask = smallcore_smt_mask;
+		powerpc_topology[i++] = (struct sched_domain_topology_level){
+			smallcore_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT)
+		};
+	} else {
+		powerpc_topology[i++] = (struct sched_domain_topology_level){
+			cpu_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT)
+		};
 	}
 #endif
+	if (shared_caches) {
+		powerpc_topology[i++] = (struct sched_domain_topology_level){
+			shared_cache_mask, powerpc_shared_cache_flags, SD_INIT_NAME(CACHE)
+		};
+	}
+	if (has_coregroup_support()) {
+		powerpc_topology[i++] = (struct sched_domain_topology_level){
+			cpu_mc_mask, powerpc_shared_proc_flags, SD_INIT_NAME(MC)
+		};
+	}
+	powerpc_topology[i++] = (struct sched_domain_topology_level){
+		cpu_cpu_mask, powerpc_shared_proc_flags, SD_INIT_NAME(PKG)
+	};
 
-	if (!has_coregroup_support())
-		powerpc_topology[mc_idx].mask = powerpc_topology[cache_idx].mask;
-
-	/*
-	 * Try to consolidate topology levels here instead of
-	 * allowing scheduler to degenerate.
-	 * - Dont consolidate if masks are different.
-	 * - Dont consolidate if sd_flags exists and are different.
-	 */
-	for (i = 1; i <= die_idx; i++) {
-		if (powerpc_topology[i].mask != powerpc_topology[i - 1].mask)
-			continue;
-
-		if (powerpc_topology[i].sd_flags && powerpc_topology[i - 1].sd_flags &&
-				powerpc_topology[i].sd_flags != powerpc_topology[i - 1].sd_flags)
-			continue;
-
-		if (!powerpc_topology[i - 1].sd_flags)
-			powerpc_topology[i - 1].sd_flags = powerpc_topology[i].sd_flags;
+	/* There must be one trailing NULL entry left.  */
+	BUG_ON(i >= ARRAY_SIZE(powerpc_topology) - 1);
 
-		powerpc_topology[i].mask = powerpc_topology[i + 1].mask;
-		powerpc_topology[i].sd_flags = powerpc_topology[i + 1].sd_flags;
-#ifdef CONFIG_SCHED_DEBUG
-		powerpc_topology[i].name = powerpc_topology[i + 1].name;
-#endif
-	}
+	set_sched_topology(powerpc_topology);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
@@ -1733,9 +1738,20 @@ void __init smp_cpus_done(unsigned int max_cpus)
 		smp_ops->bringup_done();
 
 	dump_numa_cpu_topology();
+	build_sched_topology();
+}
 
-	fixup_topology();
-	set_sched_topology(powerpc_topology);
+/*
+ * For asym packing, by default lower numbered CPU has higher priority.
+ * On shared processors, pack to lower numbered core. However avoid moving
+ * between thread_groups within the same core.
+ */
+int arch_asym_cpu_priority(int cpu)
+{
+	if (static_branch_unlikely(&splpar_asym_pack))
+		return -cpu / threads_per_core;
+
+	return -cpu;
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/swsusp_64.c linux-libre-6.8-gnu/arch/powerpc/kernel/swsusp_64.c
index 16ee3baaf09a..50fa8fc9ef95 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/swsusp_64.c
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/swsusp_64.c
@@ -11,6 +11,8 @@
 #include <linux/interrupt.h>
 #include <linux/nmi.h>
 
+void do_after_copyback(void);
+
 void do_after_copyback(void)
 {
 	iommu_restore();
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/syscalls/syscall.tbl linux-libre-6.8-gnu/arch/powerpc/kernel/syscalls/syscall.tbl
index 7fab411378f2..17173b82ca21 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/syscalls/syscall.tbl
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/syscalls/syscall.tbl
@@ -543,3 +543,8 @@
 454	common	futex_wake			sys_futex_wake
 455	common	futex_wait			sys_futex_wait
 456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/trace/ftrace.c linux-libre-6.8-gnu/arch/powerpc/kernel/trace/ftrace.c
index 82010629cf88..d8d6b4fd9a14 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/trace/ftrace.c
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/trace/ftrace.c
@@ -27,10 +27,22 @@
 #include <asm/ftrace.h>
 #include <asm/syscall.h>
 #include <asm/inst.h>
+#include <asm/sections.h>
 
 #define	NUM_FTRACE_TRAMPS	2
 static unsigned long ftrace_tramps[NUM_FTRACE_TRAMPS];
 
+unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	if (addr >= (unsigned long)__exittext_begin && addr < (unsigned long)__exittext_end)
+		return 0;
+
+	if (IS_ENABLED(CONFIG_ARCH_USING_PATCHABLE_FUNCTION_ENTRY))
+		addr += MCOUNT_INSN_SIZE;
+
+	return addr;
+}
+
 static ppc_inst_t ftrace_create_branch_inst(unsigned long ip, unsigned long addr, int link)
 {
 	ppc_inst_t op;
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/trace/ftrace_64_pg.c linux-libre-6.8-gnu/arch/powerpc/kernel/trace/ftrace_64_pg.c
index 7b85c3b460a3..12fab1803bcf 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/trace/ftrace_64_pg.c
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/trace/ftrace_64_pg.c
@@ -37,6 +37,11 @@
 #define	NUM_FTRACE_TRAMPS	8
 static unsigned long ftrace_tramps[NUM_FTRACE_TRAMPS];
 
+unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
 static ppc_inst_t
 ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
 {
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/trace/ftrace_entry.S linux-libre-6.8-gnu/arch/powerpc/kernel/trace/ftrace_entry.S
index 40677416d7b2..76dbe9fd2c0f 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/trace/ftrace_entry.S
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/trace/ftrace_entry.S
@@ -162,7 +162,6 @@ _GLOBAL(ftrace_regs_caller)
 .globl ftrace_regs_call
 ftrace_regs_call:
 	bl	ftrace_stub
-	nop
 	ftrace_regs_exit 1
 
 _GLOBAL(ftrace_caller)
@@ -171,7 +170,6 @@ _GLOBAL(ftrace_caller)
 .globl ftrace_call
 ftrace_call:
 	bl	ftrace_stub
-	nop
 	ftrace_regs_exit 0
 
 _GLOBAL(ftrace_stub)
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/traps.c linux-libre-6.8-gnu/arch/powerpc/kernel/traps.c
index 5ea2014aff90..11e062b47d3f 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/traps.c
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/traps.c
@@ -1439,10 +1439,12 @@ static int emulate_instruction(struct pt_regs *regs)
 	return -EINVAL;
 }
 
+#ifdef CONFIG_GENERIC_BUG
 int is_valid_bugaddr(unsigned long addr)
 {
 	return is_kernel_addr(addr);
 }
+#endif
 
 #ifdef CONFIG_MATH_EMULATION
 static int emulate_math(struct pt_regs *regs)
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/udbg_16550.c linux-libre-6.8-gnu/arch/powerpc/kernel/udbg_16550.c
index 74ddf836f7a2..a0467e528b70 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/udbg_16550.c
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/udbg_16550.c
@@ -7,7 +7,6 @@
 #include <linux/types.h>
 #include <asm/udbg.h>
 #include <asm/io.h>
-#include <asm/reg_a2.h>
 #include <asm/early_ioremap.h>
 
 extern u8 real_readb(volatile u8 __iomem  *addr);
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/vdso/Makefile linux-libre-6.8-gnu/arch/powerpc/kernel/vdso/Makefile
index 0c7d82c270c3..1b93655c2857 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/vdso/Makefile
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/vdso/Makefile
@@ -71,7 +71,7 @@ AS64FLAGS := -D__VDSO64__
 targets += vdso32.lds
 CPPFLAGS_vdso32.lds += -P -C -Upowerpc
 targets += vdso64.lds
-CPPFLAGS_vdso64.lds += -P -C -U$(ARCH)
+CPPFLAGS_vdso64.lds += -P -C
 
 # link rule for the .so file, .lds has to be first
 $(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32) $(obj)/vgettimeofday-32.o FORCE
diff --git linux-libre-6.7-gnu/arch/powerpc/kernel/vmlinux.lds.S linux-libre-6.8-gnu/arch/powerpc/kernel/vmlinux.lds.S
index 1c5970df3233..f420df7888a7 100644
--- linux-libre-6.7-gnu/arch/powerpc/kernel/vmlinux.lds.S
+++ linux-libre-6.8-gnu/arch/powerpc/kernel/vmlinux.lds.S
@@ -281,7 +281,9 @@ SECTIONS
 	 * to deal with references from __bug_table
 	 */
 	.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
+		__exittext_begin = .;
 		EXIT_TEXT
+		__exittext_end = .;
 	}
 
 	. = ALIGN(PAGE_SIZE);
diff --git linux-libre-6.7-gnu/arch/powerpc/kexec/core.c linux-libre-6.8-gnu/arch/powerpc/kexec/core.c
index 85846cadb9b5..27fa9098a5b7 100644
--- linux-libre-6.7-gnu/arch/powerpc/kexec/core.c
+++ linux-libre-6.8-gnu/arch/powerpc/kexec/core.c
@@ -75,6 +75,7 @@ void arch_crash_save_vmcoreinfo(void)
 	VMCOREINFO_OFFSET(mmu_psize_def, shift);
 #endif
 	VMCOREINFO_SYMBOL(cur_cpu_spec);
+	VMCOREINFO_OFFSET(cpu_spec, cpu_features);
 	VMCOREINFO_OFFSET(cpu_spec, mmu_features);
 	vmcoreinfo_append_str("NUMBER(RADIX_MMU)=%d\n", early_radix_enabled());
 	vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset());
diff --git linux-libre-6.7-gnu/arch/powerpc/kexec/core_64.c linux-libre-6.8-gnu/arch/powerpc/kexec/core_64.c
index 0bee7ca9a77c..762e4d09aacf 100644
--- linux-libre-6.7-gnu/arch/powerpc/kexec/core_64.c
+++ linux-libre-6.8-gnu/arch/powerpc/kexec/core_64.c
@@ -283,8 +283,7 @@ static void kexec_prepare_cpus(void)
  * We could use a smaller stack if we don't care about anything using
  * current, but that audit has not been performed.
  */
-static union thread_union kexec_stack __init_task_data =
-	{ };
+static union thread_union kexec_stack = { };
 
 /*
  * For similar reasons to the stack above, the kexecing CPU needs to be on a
diff --git linux-libre-6.7-gnu/arch/powerpc/kexec/elf_64.c linux-libre-6.8-gnu/arch/powerpc/kexec/elf_64.c
index eeb258002d1e..904016cf89ea 100644
--- linux-libre-6.7-gnu/arch/powerpc/kexec/elf_64.c
+++ linux-libre-6.8-gnu/arch/powerpc/kexec/elf_64.c
@@ -59,7 +59,7 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
 	if (ret)
 		goto out;
 
-	pr_debug("Loaded the kernel at 0x%lx\n", kernel_load_addr);
+	kexec_dprintk("Loaded the kernel at 0x%lx\n", kernel_load_addr);
 
 	ret = kexec_load_purgatory(image, &pbuf);
 	if (ret) {
@@ -67,7 +67,7 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
 		goto out;
 	}
 
-	pr_debug("Loaded purgatory at 0x%lx\n", pbuf.mem);
+	kexec_dprintk("Loaded purgatory at 0x%lx\n", pbuf.mem);
 
 	/* Load additional segments needed for panic kernel */
 	if (image->type == KEXEC_TYPE_CRASH) {
@@ -99,7 +99,7 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
 			goto out;
 		initrd_load_addr = kbuf.mem;
 
-		pr_debug("Loaded initrd at 0x%lx\n", initrd_load_addr);
+		kexec_dprintk("Loaded initrd at 0x%lx\n", initrd_load_addr);
 	}
 
 	fdt = of_kexec_alloc_and_setup_fdt(image, initrd_load_addr,
@@ -132,7 +132,7 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
 
 	fdt_load_addr = kbuf.mem;
 
-	pr_debug("Loaded device tree at 0x%lx\n", fdt_load_addr);
+	kexec_dprintk("Loaded device tree at 0x%lx\n", fdt_load_addr);
 
 	slave_code = elf_info.buffer + elf_info.proghdrs[0].p_offset;
 	ret = setup_purgatory_ppc64(image, slave_code, fdt, kernel_load_addr,
diff --git linux-libre-6.7-gnu/arch/powerpc/kexec/file_load_64.c linux-libre-6.8-gnu/arch/powerpc/kexec/file_load_64.c
index 961a6dd67365..5b4c5cb23354 100644
--- linux-libre-6.7-gnu/arch/powerpc/kexec/file_load_64.c
+++ linux-libre-6.8-gnu/arch/powerpc/kexec/file_load_64.c
@@ -577,7 +577,7 @@ static int add_usable_mem_property(void *fdt, struct device_node *dn,
 		       NODE_PATH_LEN, dn);
 		return -EOVERFLOW;
 	}
-	pr_debug("Memory node path: %s\n", path);
+	kexec_dprintk("Memory node path: %s\n", path);
 
 	/* Now that we know the path, find its offset in kdump kernel's fdt */
 	node = fdt_path_offset(fdt, path);
@@ -590,8 +590,8 @@ static int add_usable_mem_property(void *fdt, struct device_node *dn,
 	/* Get the address & size cells */
 	n_mem_addr_cells = of_n_addr_cells(dn);
 	n_mem_size_cells = of_n_size_cells(dn);
-	pr_debug("address cells: %d, size cells: %d\n", n_mem_addr_cells,
-		 n_mem_size_cells);
+	kexec_dprintk("address cells: %d, size cells: %d\n", n_mem_addr_cells,
+		      n_mem_size_cells);
 
 	um_info->idx  = 0;
 	if (!check_realloc_usable_mem(um_info, 2)) {
@@ -664,7 +664,7 @@ static int update_usable_mem_fdt(void *fdt, struct crash_mem *usable_mem)
 
 	node = fdt_path_offset(fdt, "/ibm,dynamic-reconfiguration-memory");
 	if (node == -FDT_ERR_NOTFOUND)
-		pr_debug("No dynamic reconfiguration memory found\n");
+		kexec_dprintk("No dynamic reconfiguration memory found\n");
 	else if (node < 0) {
 		pr_err("Malformed device tree: error reading /ibm,dynamic-reconfiguration-memory.\n");
 		return -EINVAL;
@@ -776,8 +776,8 @@ static void update_backup_region_phdr(struct kimage *image, Elf64_Ehdr *ehdr)
 	for (i = 0; i < ehdr->e_phnum; i++) {
 		if (phdr->p_paddr == BACKUP_SRC_START) {
 			phdr->p_offset = image->arch.backup_start;
-			pr_debug("Backup region offset updated to 0x%lx\n",
-				 image->arch.backup_start);
+			kexec_dprintk("Backup region offset updated to 0x%lx\n",
+				      image->arch.backup_start);
 			return;
 		}
 	}
@@ -850,7 +850,7 @@ int load_crashdump_segments_ppc64(struct kimage *image,
 		pr_err("Failed to load backup segment\n");
 		return ret;
 	}
-	pr_debug("Loaded the backup region at 0x%lx\n", kbuf->mem);
+	kexec_dprintk("Loaded the backup region at 0x%lx\n", kbuf->mem);
 
 	/* Load elfcorehdr segment - to export crashing kernel's vmcore */
 	ret = load_elfcorehdr_segment(image, kbuf);
@@ -858,8 +858,8 @@ int load_crashdump_segments_ppc64(struct kimage *image,
 		pr_err("Failed to load elfcorehdr segment\n");
 		return ret;
 	}
-	pr_debug("Loaded elf core header at 0x%lx, bufsz=0x%lx memsz=0x%lx\n",
-		 image->elf_load_addr, kbuf->bufsz, kbuf->memsz);
+	kexec_dprintk("Loaded elf core header at 0x%lx, bufsz=0x%lx memsz=0x%lx\n",
+		      image->elf_load_addr, kbuf->bufsz, kbuf->memsz);
 
 	return 0;
 }
diff --git linux-libre-6.7-gnu/arch/powerpc/kvm/Kconfig linux-libre-6.8-gnu/arch/powerpc/kvm/Kconfig
index 902611954200..074263429faf 100644
--- linux-libre-6.7-gnu/arch/powerpc/kvm/Kconfig
+++ linux-libre-6.8-gnu/arch/powerpc/kvm/Kconfig
@@ -19,13 +19,11 @@ if VIRTUALIZATION
 
 config KVM
 	bool
-	select PREEMPT_NOTIFIERS
-	select HAVE_KVM_EVENTFD
+	select KVM_COMMON
 	select HAVE_KVM_VCPU_ASYNC_IOCTL
 	select KVM_VFIO
 	select IRQ_BYPASS_MANAGER
 	select HAVE_KVM_IRQ_BYPASS
-	select INTERVAL_TREE
 
 config KVM_BOOK3S_HANDLER
 	bool
@@ -42,7 +40,7 @@ config KVM_BOOK3S_64_HANDLER
 config KVM_BOOK3S_PR_POSSIBLE
 	bool
 	select KVM_MMIO
-	select MMU_NOTIFIER
+	select KVM_GENERIC_MMU_NOTIFIER
 
 config KVM_BOOK3S_HV_POSSIBLE
 	bool
@@ -85,7 +83,7 @@ config KVM_BOOK3S_64_HV
 	tristate "KVM for POWER7 and later using hypervisor mode in host"
 	depends on KVM_BOOK3S_64 && PPC_POWERNV
 	select KVM_BOOK3S_HV_POSSIBLE
-	select MMU_NOTIFIER
+	select KVM_GENERIC_MMU_NOTIFIER
 	select CMA
 	help
 	  Support running unmodified book3s_64 guest kernels in
@@ -194,7 +192,7 @@ config KVM_E500V2
 	depends on !CONTEXT_TRACKING_USER
 	select KVM
 	select KVM_MMIO
-	select MMU_NOTIFIER
+	select KVM_GENERIC_MMU_NOTIFIER
 	help
 	  Support running unmodified E500 guest kernels in virtual machines on
 	  E500v2 host processors.
@@ -211,7 +209,7 @@ config KVM_E500MC
 	select KVM
 	select KVM_MMIO
 	select KVM_BOOKE_HV
-	select MMU_NOTIFIER
+	select KVM_GENERIC_MMU_NOTIFIER
 	help
 	  Support running unmodified E500MC/E5500/E6500 guest kernels in
 	  virtual machines on E500MC/E5500/E6500 host processors.
@@ -225,7 +223,6 @@ config KVM_MPIC
 	bool "KVM in-kernel MPIC emulation"
 	depends on KVM && PPC_E500
 	select HAVE_KVM_IRQCHIP
-	select HAVE_KVM_IRQFD
 	select HAVE_KVM_IRQ_ROUTING
 	select HAVE_KVM_MSI
 	help
@@ -238,7 +235,6 @@ config KVM_XICS
 	bool "KVM in-kernel XICS emulation"
 	depends on KVM_BOOK3S_64 && !KVM_MPIC
 	select HAVE_KVM_IRQCHIP
-	select HAVE_KVM_IRQFD
 	default y
 	help
 	  Include support for the XICS (eXternal Interrupt Controller
diff --git linux-libre-6.7-gnu/arch/powerpc/kvm/book3s.c linux-libre-6.8-gnu/arch/powerpc/kvm/book3s.c
index 6cd20ab9e94e..8acec144120e 100644
--- linux-libre-6.7-gnu/arch/powerpc/kvm/book3s.c
+++ linux-libre-6.8-gnu/arch/powerpc/kvm/book3s.c
@@ -302,11 +302,11 @@ static int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu,
 
 	switch (priority) {
 	case BOOK3S_IRQPRIO_DECREMENTER:
-		deliver = (kvmppc_get_msr(vcpu) & MSR_EE) && !crit;
+		deliver = !kvmhv_is_nestedv2() && (kvmppc_get_msr(vcpu) & MSR_EE) && !crit;
 		vec = BOOK3S_INTERRUPT_DECREMENTER;
 		break;
 	case BOOK3S_IRQPRIO_EXTERNAL:
-		deliver = (kvmppc_get_msr(vcpu) & MSR_EE) && !crit;
+		deliver = !kvmhv_is_nestedv2() && (kvmppc_get_msr(vcpu) & MSR_EE) && !crit;
 		vec = BOOK3S_INTERRUPT_EXTERNAL;
 		break;
 	case BOOK3S_IRQPRIO_SYSTEM_RESET:
diff --git linux-libre-6.7-gnu/arch/powerpc/kvm/book3s_64_mmu_radix.c linux-libre-6.8-gnu/arch/powerpc/kvm/book3s_64_mmu_radix.c
index 175a8eb2681f..4a1abb9f7c05 100644
--- linux-libre-6.7-gnu/arch/powerpc/kvm/book3s_64_mmu_radix.c
+++ linux-libre-6.8-gnu/arch/powerpc/kvm/book3s_64_mmu_radix.c
@@ -40,6 +40,9 @@ unsigned long __kvmhv_copy_tofrom_guest_radix(int lpid, int pid,
 	unsigned long quadrant, ret = n;
 	bool is_load = !!to;
 
+	if (kvmhv_is_nestedv2())
+		return H_UNSUPPORTED;
+
 	/* Can't access quadrants 1 or 2 in non-HV mode, call the HV to do it */
 	if (kvmhv_on_pseries())
 		return plpar_hcall_norets(H_COPY_TOFROM_GUEST, lpid, pid, eaddr,
@@ -97,7 +100,7 @@ static long kvmhv_copy_tofrom_guest_radix(struct kvm_vcpu *vcpu, gva_t eaddr,
 					  void *to, void *from, unsigned long n)
 {
 	int lpid = vcpu->kvm->arch.lpid;
-	int pid = kvmppc_get_pid(vcpu);
+	int pid;
 
 	/* This would cause a data segment intr so don't allow the access */
 	if (eaddr & (0x3FFUL << 52))
@@ -110,6 +113,8 @@ static long kvmhv_copy_tofrom_guest_radix(struct kvm_vcpu *vcpu, gva_t eaddr,
 	/* If accessing quadrant 3 then pid is expected to be 0 */
 	if (((eaddr >> 62) & 0x3) == 0x3)
 		pid = 0;
+	else
+		pid = kvmppc_get_pid(vcpu);
 
 	eaddr &= ~(0xFFFUL << 52);
 
diff --git linux-libre-6.7-gnu/arch/powerpc/kvm/book3s_64_vio.c linux-libre-6.8-gnu/arch/powerpc/kvm/book3s_64_vio.c
index 14c6d7e318da..b569ebaa590e 100644
--- linux-libre-6.7-gnu/arch/powerpc/kvm/book3s_64_vio.c
+++ linux-libre-6.8-gnu/arch/powerpc/kvm/book3s_64_vio.c
@@ -20,6 +20,7 @@
 #include <linux/iommu.h>
 #include <linux/file.h>
 #include <linux/mm.h>
+#include <linux/rcupdate_wait.h>
 
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
diff --git linux-libre-6.7-gnu/arch/powerpc/kvm/book3s_hv.c linux-libre-6.8-gnu/arch/powerpc/kvm/book3s_hv.c
index 1ed6ec140701..0b921704da45 100644
--- linux-libre-6.7-gnu/arch/powerpc/kvm/book3s_hv.c
+++ linux-libre-6.8-gnu/arch/powerpc/kvm/book3s_hv.c
@@ -391,6 +391,24 @@ static void kvmppc_set_pvr_hv(struct kvm_vcpu *vcpu, u32 pvr)
 /* Dummy value used in computing PCR value below */
 #define PCR_ARCH_31    (PCR_ARCH_300 << 1)
 
+static inline unsigned long map_pcr_to_cap(unsigned long pcr)
+{
+	unsigned long cap = 0;
+
+	switch (pcr) {
+	case PCR_ARCH_300:
+		cap = H_GUEST_CAP_POWER9;
+		break;
+	case PCR_ARCH_31:
+		cap = H_GUEST_CAP_POWER10;
+		break;
+	default:
+		break;
+	}
+
+	return cap;
+}
+
 static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat)
 {
 	unsigned long host_pcr_bit = 0, guest_pcr_bit = 0, cap = 0;
@@ -424,11 +442,9 @@ static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat)
 			break;
 		case PVR_ARCH_300:
 			guest_pcr_bit = PCR_ARCH_300;
-			cap = H_GUEST_CAP_POWER9;
 			break;
 		case PVR_ARCH_31:
 			guest_pcr_bit = PCR_ARCH_31;
-			cap = H_GUEST_CAP_POWER10;
 			break;
 		default:
 			return -EINVAL;
@@ -440,6 +456,12 @@ static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat)
 		return -EINVAL;
 
 	if (kvmhv_on_pseries() && kvmhv_is_nestedv2()) {
+		/*
+		 * 'arch_compat == 0' would mean the guest should default to
+		 * L1's compatibility. In this case, the guest would pick
+		 * host's PCR and evaluate the corresponding capabilities.
+		 */
+		cap = map_pcr_to_cap(guest_pcr_bit);
 		if (!(cap & nested_capabilities))
 			return -EINVAL;
 	}
@@ -650,7 +672,8 @@ static unsigned long do_h_register_vpa(struct kvm_vcpu *vcpu,
 	return err;
 }
 
-static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap)
+static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap,
+			       struct kvmppc_vpa *old_vpap)
 {
 	struct kvm *kvm = vcpu->kvm;
 	void *va;
@@ -690,9 +713,8 @@ static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap)
 		kvmppc_unpin_guest_page(kvm, va, gpa, false);
 		va = NULL;
 	}
-	if (vpap->pinned_addr)
-		kvmppc_unpin_guest_page(kvm, vpap->pinned_addr, vpap->gpa,
-					vpap->dirty);
+	*old_vpap = *vpap;
+
 	vpap->gpa = gpa;
 	vpap->pinned_addr = va;
 	vpap->dirty = false;
@@ -702,6 +724,9 @@ static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap)
 
 static void kvmppc_update_vpas(struct kvm_vcpu *vcpu)
 {
+	struct kvm *kvm = vcpu->kvm;
+	struct kvmppc_vpa old_vpa = { 0 };
+
 	if (!(vcpu->arch.vpa.update_pending ||
 	      vcpu->arch.slb_shadow.update_pending ||
 	      vcpu->arch.dtl.update_pending))
@@ -709,17 +734,34 @@ static void kvmppc_update_vpas(struct kvm_vcpu *vcpu)
 
 	spin_lock(&vcpu->arch.vpa_update_lock);
 	if (vcpu->arch.vpa.update_pending) {
-		kvmppc_update_vpa(vcpu, &vcpu->arch.vpa);
-		if (vcpu->arch.vpa.pinned_addr)
+		kvmppc_update_vpa(vcpu, &vcpu->arch.vpa, &old_vpa);
+		if (old_vpa.pinned_addr) {
+			if (kvmhv_is_nestedv2())
+				kvmhv_nestedv2_set_vpa(vcpu, ~0ull);
+			kvmppc_unpin_guest_page(kvm, old_vpa.pinned_addr, old_vpa.gpa,
+						old_vpa.dirty);
+		}
+		if (vcpu->arch.vpa.pinned_addr) {
 			init_vpa(vcpu, vcpu->arch.vpa.pinned_addr);
+			if (kvmhv_is_nestedv2())
+				kvmhv_nestedv2_set_vpa(vcpu, __pa(vcpu->arch.vpa.pinned_addr));
+		}
 	}
 	if (vcpu->arch.dtl.update_pending) {
-		kvmppc_update_vpa(vcpu, &vcpu->arch.dtl);
+		kvmppc_update_vpa(vcpu, &vcpu->arch.dtl, &old_vpa);
+		if (old_vpa.pinned_addr)
+			kvmppc_unpin_guest_page(kvm, old_vpa.pinned_addr, old_vpa.gpa,
+						old_vpa.dirty);
 		vcpu->arch.dtl_ptr = vcpu->arch.dtl.pinned_addr;
 		vcpu->arch.dtl_index = 0;
 	}
-	if (vcpu->arch.slb_shadow.update_pending)
-		kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow);
+	if (vcpu->arch.slb_shadow.update_pending) {
+		kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow, &old_vpa);
+		if (old_vpa.pinned_addr)
+			kvmppc_unpin_guest_page(kvm, old_vpa.pinned_addr, old_vpa.gpa,
+						old_vpa.dirty);
+	}
+
 	spin_unlock(&vcpu->arch.vpa_update_lock);
 }
 
@@ -1597,7 +1639,7 @@ static int kvmppc_handle_exit_hv(struct kvm_vcpu *vcpu,
 	 * That can happen due to a bug, or due to a machine check
 	 * occurring at just the wrong time.
 	 */
-	if (__kvmppc_get_msr_hv(vcpu) & MSR_HV) {
+	if (!kvmhv_is_nestedv2() && (__kvmppc_get_msr_hv(vcpu) & MSR_HV)) {
 		printk(KERN_EMERG "KVM trap in HV mode!\n");
 		printk(KERN_EMERG "trap=0x%x | pc=0x%lx | msr=0x%llx\n",
 			vcpu->arch.trap, kvmppc_get_pc(vcpu),
@@ -1688,7 +1730,7 @@ static int kvmppc_handle_exit_hv(struct kvm_vcpu *vcpu,
 	{
 		int i;
 
-		if (unlikely(__kvmppc_get_msr_hv(vcpu) & MSR_PR)) {
+		if (!kvmhv_is_nestedv2() && unlikely(__kvmppc_get_msr_hv(vcpu) & MSR_PR)) {
 			/*
 			 * Guest userspace executed sc 1. This can only be
 			 * reached by the P9 path because the old path
@@ -4084,6 +4126,8 @@ static int kvmhv_vcpu_entry_nestedv2(struct kvm_vcpu *vcpu, u64 time_limit,
 	if (rc < 0)
 		return -EINVAL;
 
+	kvmppc_gse_put_u64(io->vcpu_run_input, KVMPPC_GSID_LPCR, lpcr);
+
 	accumulate_time(vcpu, &vcpu->arch.in_guest);
 	rc = plpar_guest_run_vcpu(0, vcpu->kvm->arch.lpid, vcpu->vcpu_id,
 				  &trap, &i);
@@ -4736,13 +4780,19 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit,
 
 	if (!nested) {
 		kvmppc_core_prepare_to_enter(vcpu);
-		if (__kvmppc_get_msr_hv(vcpu) & MSR_EE) {
-			if (xive_interrupt_pending(vcpu))
+		if (test_bit(BOOK3S_IRQPRIO_EXTERNAL,
+			     &vcpu->arch.pending_exceptions) ||
+		    xive_interrupt_pending(vcpu)) {
+			/*
+			 * For nested HV, don't synthesize but always pass MER,
+			 * the L0 will be able to optimise that more
+			 * effectively than manipulating registers directly.
+			 */
+			if (!kvmhv_on_pseries() && (__kvmppc_get_msr_hv(vcpu) & MSR_EE))
 				kvmppc_inject_interrupt_hv(vcpu,
-						BOOK3S_INTERRUPT_EXTERNAL, 0);
-		} else if (test_bit(BOOK3S_IRQPRIO_EXTERNAL,
-			     &vcpu->arch.pending_exceptions)) {
-			lpcr |= LPCR_MER;
+							   BOOK3S_INTERRUPT_EXTERNAL, 0);
+			else
+				lpcr |= LPCR_MER;
 		}
 	} else if (vcpu->arch.pending_exceptions ||
 		   vcpu->arch.doorbell_request ||
@@ -4806,7 +4856,7 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit,
 	 * entering a nested guest in which case the decrementer is now owned
 	 * by L2 and the L1 decrementer is provided in hdec_expires
 	 */
-	if (kvmppc_core_pending_dec(vcpu) &&
+	if (!kvmhv_is_nestedv2() && kvmppc_core_pending_dec(vcpu) &&
 			((tb < kvmppc_dec_expires_host_tb(vcpu)) ||
 			 (trap == BOOK3S_INTERRUPT_SYSCALL &&
 			  kvmppc_get_gpr(vcpu, 3) == H_ENTER_NESTED)))
@@ -4949,7 +4999,7 @@ static int kvmppc_vcpu_run_hv(struct kvm_vcpu *vcpu)
 		if (run->exit_reason == KVM_EXIT_PAPR_HCALL) {
 			accumulate_time(vcpu, &vcpu->arch.hcall);
 
-			if (WARN_ON_ONCE(__kvmppc_get_msr_hv(vcpu) & MSR_PR)) {
+			if (!kvmhv_is_nestedv2() && WARN_ON_ONCE(__kvmppc_get_msr_hv(vcpu) & MSR_PR)) {
 				/*
 				 * These should have been caught reflected
 				 * into the guest by now. Final sanity check:
@@ -5691,10 +5741,12 @@ static void kvmppc_core_destroy_vm_hv(struct kvm *kvm)
 			kvmhv_set_ptbl_entry(kvm->arch.lpid, 0, 0);
 	}
 
-	if (kvmhv_is_nestedv2())
+	if (kvmhv_is_nestedv2()) {
+		kvmhv_flush_lpid(kvm->arch.lpid);
 		plpar_guest_delete(0, kvm->arch.lpid);
-	else
+	} else {
 		kvmppc_free_lpid(kvm->arch.lpid);
+	}
 
 	kvmppc_free_pimap(kvm);
 }
@@ -6210,7 +6262,7 @@ static int kvmhv_svm_off(struct kvm *kvm)
 	}
 
 	srcu_idx = srcu_read_lock(&kvm->srcu);
-	for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
+	for (i = 0; i < kvm_arch_nr_memslot_as_ids(kvm); i++) {
 		struct kvm_memory_slot *memslot;
 		struct kvm_memslots *slots = __kvm_memslots(kvm, i);
 		int bkt;
diff --git linux-libre-6.7-gnu/arch/powerpc/kvm/book3s_hv_nested.c linux-libre-6.8-gnu/arch/powerpc/kvm/book3s_hv_nested.c
index 3b658b8696bc..5c375ec1a3c6 100644
--- linux-libre-6.7-gnu/arch/powerpc/kvm/book3s_hv_nested.c
+++ linux-libre-6.8-gnu/arch/powerpc/kvm/book3s_hv_nested.c
@@ -503,7 +503,7 @@ void kvmhv_nested_exit(void)
 	}
 }
 
-static void kvmhv_flush_lpid(u64 lpid)
+void kvmhv_flush_lpid(u64 lpid)
 {
 	long rc;
 
diff --git linux-libre-6.7-gnu/arch/powerpc/kvm/book3s_hv_nestedv2.c linux-libre-6.8-gnu/arch/powerpc/kvm/book3s_hv_nestedv2.c
index fd3c4f2d9480..8e6f5355f08b 100644
--- linux-libre-6.7-gnu/arch/powerpc/kvm/book3s_hv_nestedv2.c
+++ linux-libre-6.8-gnu/arch/powerpc/kvm/book3s_hv_nestedv2.c
@@ -138,6 +138,7 @@ static int gs_msg_ops_vcpu_fill_info(struct kvmppc_gs_buff *gsb,
 	vector128 v;
 	int rc, i;
 	u16 iden;
+	u32 arch_compat = 0;
 
 	vcpu = gsm->data;
 
@@ -347,8 +348,23 @@ static int gs_msg_ops_vcpu_fill_info(struct kvmppc_gs_buff *gsb,
 			break;
 		}
 		case KVMPPC_GSID_LOGICAL_PVR:
-			rc = kvmppc_gse_put_u32(gsb, iden,
-						vcpu->arch.vcore->arch_compat);
+			/*
+			 * Though 'arch_compat == 0' would mean the default
+			 * compatibility, arch_compat, being a Guest Wide
+			 * Element, cannot be filled with a value of 0 in GSB
+			 * as this would result into a kernel trap.
+			 * Hence, when `arch_compat == 0`, arch_compat should
+			 * default to L1's PVR.
+			 */
+			if (!vcpu->arch.vcore->arch_compat) {
+				if (cpu_has_feature(CPU_FTR_ARCH_31))
+					arch_compat = PVR_ARCH_31;
+				else if (cpu_has_feature(CPU_FTR_ARCH_300))
+					arch_compat = PVR_ARCH_300;
+			} else {
+				arch_compat = vcpu->arch.vcore->arch_compat;
+			}
+			rc = kvmppc_gse_put_u32(gsb, iden, arch_compat);
 			break;
 		}
 
@@ -855,6 +871,35 @@ free_gsb:
 }
 EXPORT_SYMBOL_GPL(kvmhv_nestedv2_set_ptbl_entry);
 
+/**
+ * kvmhv_nestedv2_set_vpa() - register L2 VPA with L0
+ * @vcpu: vcpu
+ * @vpa: L1 logical real address
+ */
+int kvmhv_nestedv2_set_vpa(struct kvm_vcpu *vcpu, unsigned long vpa)
+{
+	struct kvmhv_nestedv2_io *io;
+	struct kvmppc_gs_buff *gsb;
+	int rc = 0;
+
+	io = &vcpu->arch.nestedv2_io;
+	gsb = io->vcpu_run_input;
+
+	kvmppc_gsb_reset(gsb);
+	rc = kvmppc_gse_put_u64(gsb, KVMPPC_GSID_VPA, vpa);
+	if (rc < 0)
+		goto out;
+
+	rc = kvmppc_gsb_send(gsb, 0);
+	if (rc < 0)
+		pr_err("KVM-NESTEDv2: couldn't register the L2 VPA (rc=%d)\n", rc);
+
+out:
+	kvmppc_gsb_reset(gsb);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(kvmhv_nestedv2_set_vpa);
+
 /**
  * kvmhv_nestedv2_parse_output() - receive values from H_GUEST_RUN_VCPU output
  * @vcpu: vcpu
diff --git linux-libre-6.7-gnu/arch/powerpc/kvm/book3s_pr.c linux-libre-6.8-gnu/arch/powerpc/kvm/book3s_pr.c
index 9118242063fb..5b92619a05fd 100644
--- linux-libre-6.7-gnu/arch/powerpc/kvm/book3s_pr.c
+++ linux-libre-6.8-gnu/arch/powerpc/kvm/book3s_pr.c
@@ -604,6 +604,7 @@ static void kvmppc_set_pvr_pr(struct kvm_vcpu *vcpu, u32 pvr)
 	case PVR_POWER8:
 	case PVR_POWER8E:
 	case PVR_POWER8NVL:
+	case PVR_HX_C2000:
 	case PVR_POWER9:
 		vcpu->arch.hflags |= BOOK3S_HFLAG_MULTI_PGSIZE |
 			BOOK3S_HFLAG_NEW_TLBIE;
diff --git linux-libre-6.7-gnu/arch/powerpc/kvm/emulate_loadstore.c linux-libre-6.8-gnu/arch/powerpc/kvm/emulate_loadstore.c
index 077fd88a0b68..ec60c7979718 100644
--- linux-libre-6.7-gnu/arch/powerpc/kvm/emulate_loadstore.c
+++ linux-libre-6.8-gnu/arch/powerpc/kvm/emulate_loadstore.c
@@ -93,7 +93,6 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 
 	emulated = EMULATE_FAIL;
 	vcpu->arch.regs.msr = kvmppc_get_msr(vcpu);
-	kvmhv_nestedv2_reload_ptregs(vcpu, &vcpu->arch.regs);
 	if (analyse_instr(&op, &vcpu->arch.regs, inst) == 0) {
 		int type = op.type & INSTR_TYPE_MASK;
 		int size = GETSIZE(op.type);
@@ -112,7 +111,7 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 						op.reg, size, !instr_byte_swap);
 
 			if ((op.type & UPDATE) && (emulated != EMULATE_FAIL))
-				kvmppc_set_gpr(vcpu, op.update_reg, op.ea);
+				kvmppc_set_gpr(vcpu, op.update_reg, vcpu->arch.vaddr_accessed);
 
 			break;
 		}
@@ -132,7 +131,7 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 					     KVM_MMIO_REG_FPR|op.reg, size, 1);
 
 			if ((op.type & UPDATE) && (emulated != EMULATE_FAIL))
-				kvmppc_set_gpr(vcpu, op.update_reg, op.ea);
+				kvmppc_set_gpr(vcpu, op.update_reg, vcpu->arch.vaddr_accessed);
 
 			break;
 #endif
@@ -224,16 +223,17 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 			break;
 		}
 #endif
-		case STORE:
-			/* if need byte reverse, op.val has been reversed by
-			 * analyse_instr().
-			 */
-			emulated = kvmppc_handle_store(vcpu, op.val, size, 1);
+		case STORE: {
+			int instr_byte_swap = op.type & BYTEREV;
+
+			emulated = kvmppc_handle_store(vcpu, kvmppc_get_gpr(vcpu, op.reg),
+						       size, !instr_byte_swap);
 
 			if ((op.type & UPDATE) && (emulated != EMULATE_FAIL))
-				kvmppc_set_gpr(vcpu, op.update_reg, op.ea);
+				kvmppc_set_gpr(vcpu, op.update_reg, vcpu->arch.vaddr_accessed);
 
 			break;
+		}
 #ifdef CONFIG_PPC_FPU
 		case STORE_FP:
 			if (kvmppc_check_fp_disabled(vcpu))
@@ -254,7 +254,7 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 					kvmppc_get_fpr(vcpu, op.reg), size, 1);
 
 			if ((op.type & UPDATE) && (emulated != EMULATE_FAIL))
-				kvmppc_set_gpr(vcpu, op.update_reg, op.ea);
+				kvmppc_set_gpr(vcpu, op.update_reg, vcpu->arch.vaddr_accessed);
 
 			break;
 #endif
@@ -358,7 +358,6 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 	}
 
 	trace_kvm_ppc_instr(ppc_inst_val(inst), kvmppc_get_pc(vcpu), emulated);
-	kvmhv_nestedv2_mark_dirty_ptregs(vcpu, &vcpu->arch.regs);
 
 	/* Advance past emulated instruction. */
 	if (emulated != EMULATE_FAIL)
diff --git linux-libre-6.7-gnu/arch/powerpc/kvm/powerpc.c linux-libre-6.8-gnu/arch/powerpc/kvm/powerpc.c
index f6af752698d0..23407fbd73c9 100644
--- linux-libre-6.7-gnu/arch/powerpc/kvm/powerpc.c
+++ linux-libre-6.8-gnu/arch/powerpc/kvm/powerpc.c
@@ -528,7 +528,6 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_ENABLE_CAP:
 	case KVM_CAP_ONE_REG:
 	case KVM_CAP_IOEVENTFD:
-	case KVM_CAP_DEVICE_CTRL:
 	case KVM_CAP_IMMEDIATE_EXIT:
 	case KVM_CAP_SET_GUEST_DEBUG:
 		r = 1;
@@ -578,7 +577,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		break;
 #endif
 
-#ifdef CONFIG_HAVE_KVM_IRQFD
+#ifdef CONFIG_HAVE_KVM_IRQCHIP
 	case KVM_CAP_IRQFD_RESAMPLE:
 		r = !xive_enabled();
 		break;
@@ -632,13 +631,8 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		break;
 #endif
 	case KVM_CAP_SYNC_MMU:
-#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
-		r = hv_enabled;
-#elif defined(KVM_ARCH_WANT_MMU_NOTIFIER)
+		BUILD_BUG_ON(!IS_ENABLED(CONFIG_KVM_GENERIC_MMU_NOTIFIER));
 		r = 1;
-#else
-		r = 0;
-#endif
 		break;
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 	case KVM_CAP_PPC_HTAB_FD:
diff --git linux-libre-6.7-gnu/arch/powerpc/lib/Makefile linux-libre-6.8-gnu/arch/powerpc/lib/Makefile
index 51ad0397c17a..6eac63e79a89 100644
--- linux-libre-6.7-gnu/arch/powerpc/lib/Makefile
+++ linux-libre-6.8-gnu/arch/powerpc/lib/Makefile
@@ -45,7 +45,7 @@ obj-$(CONFIG_FUNCTION_ERROR_INJECTION)	+= error-inject.o
 # so it is only needed for modules, and only for older linkers which
 # do not support --save-restore-funcs
 ifndef CONFIG_LD_IS_BFD
-extra-$(CONFIG_PPC64)	+= crtsavres.o
+always-$(CONFIG_PPC64)	+= crtsavres.o
 endif
 
 obj-$(CONFIG_PPC_BOOK3S_64) += copyuser_power7.o copypage_power7.o \
diff --git linux-libre-6.7-gnu/arch/powerpc/lib/sstep.c linux-libre-6.8-gnu/arch/powerpc/lib/sstep.c
index a4ab8625061a..5766180f5380 100644
--- linux-libre-6.7-gnu/arch/powerpc/lib/sstep.c
+++ linux-libre-6.8-gnu/arch/powerpc/lib/sstep.c
@@ -586,6 +586,8 @@ static int do_fp_load(struct instruction_op *op, unsigned long ea,
 	} u;
 
 	nb = GETSIZE(op->type);
+	if (nb > sizeof(u))
+		return -EINVAL;
 	if (!address_ok(regs, ea, nb))
 		return -EFAULT;
 	rn = op->reg;
@@ -636,6 +638,8 @@ static int do_fp_store(struct instruction_op *op, unsigned long ea,
 	} u;
 
 	nb = GETSIZE(op->type);
+	if (nb > sizeof(u))
+		return -EINVAL;
 	if (!address_ok(regs, ea, nb))
 		return -EFAULT;
 	rn = op->reg;
@@ -680,6 +684,9 @@ static nokprobe_inline int do_vec_load(int rn, unsigned long ea,
 		u8 b[sizeof(__vector128)];
 	} u = {};
 
+	if (size > sizeof(u))
+		return -EINVAL;
+
 	if (!address_ok(regs, ea & ~0xfUL, 16))
 		return -EFAULT;
 	/* align to multiple of size */
@@ -688,7 +695,7 @@ static nokprobe_inline int do_vec_load(int rn, unsigned long ea,
 	if (err)
 		return err;
 	if (unlikely(cross_endian))
-		do_byte_reverse(&u.b[ea & 0xf], size);
+		do_byte_reverse(&u.b[ea & 0xf], min_t(size_t, size, sizeof(u)));
 	preempt_disable();
 	if (regs->msr & MSR_VEC)
 		put_vr(rn, &u.v);
@@ -707,6 +714,9 @@ static nokprobe_inline int do_vec_store(int rn, unsigned long ea,
 		u8 b[sizeof(__vector128)];
 	} u;
 
+	if (size > sizeof(u))
+		return -EINVAL;
+
 	if (!address_ok(regs, ea & ~0xfUL, 16))
 		return -EFAULT;
 	/* align to multiple of size */
@@ -719,7 +729,7 @@ static nokprobe_inline int do_vec_store(int rn, unsigned long ea,
 		u.v = current->thread.vr_state.vr[rn];
 	preempt_enable();
 	if (unlikely(cross_endian))
-		do_byte_reverse(&u.b[ea & 0xf], size);
+		do_byte_reverse(&u.b[ea & 0xf], min_t(size_t, size, sizeof(u)));
 	return copy_mem_out(&u.b[ea & 0xf], ea, size, regs);
 }
 #endif /* CONFIG_ALTIVEC */
diff --git linux-libre-6.7-gnu/arch/powerpc/mm/book3s64/hash_utils.c linux-libre-6.8-gnu/arch/powerpc/mm/book3s64/hash_utils.c
index ad2afa08e62e..0626a25b0d72 100644
--- linux-libre-6.7-gnu/arch/powerpc/mm/book3s64/hash_utils.c
+++ linux-libre-6.8-gnu/arch/powerpc/mm/book3s64/hash_utils.c
@@ -310,9 +310,16 @@ unsigned long htab_convert_pte_flags(unsigned long pteflags, unsigned long flags
 			else
 				rflags |= 0x3;
 		}
+		VM_WARN_ONCE(!(pteflags & _PAGE_RWX), "no-access mapping request");
 	} else {
 		if (pteflags & _PAGE_RWX)
 			rflags |= 0x2;
+		/*
+		 * We should never hit this in normal fault handling because
+		 * a permission check (check_pte_access()) will bubble this
+		 * to higher level linux handler even for PAGE_NONE.
+		 */
+		VM_WARN_ONCE(!(pteflags & _PAGE_RWX), "no-access mapping request");
 		if (!((pteflags & _PAGE_WRITE) && (pteflags & _PAGE_DIRTY)))
 			rflags |= 0x1;
 	}
diff --git linux-libre-6.7-gnu/arch/powerpc/mm/book3s64/iommu_api.c linux-libre-6.8-gnu/arch/powerpc/mm/book3s64/iommu_api.c
index d19fb1f3007d..c0e8d597e4cb 100644
--- linux-libre-6.7-gnu/arch/powerpc/mm/book3s64/iommu_api.c
+++ linux-libre-6.8-gnu/arch/powerpc/mm/book3s64/iommu_api.c
@@ -97,7 +97,7 @@ static long mm_iommu_do_alloc(struct mm_struct *mm, unsigned long ua,
 	}
 
 	mmap_read_lock(mm);
-	chunk = (1UL << (PAGE_SHIFT + MAX_ORDER)) /
+	chunk = (1UL << (PAGE_SHIFT + MAX_PAGE_ORDER)) /
 			sizeof(struct vm_area_struct *);
 	chunk = min(chunk, entries);
 	for (entry = 0; entry < entries; entry += chunk) {
diff --git linux-libre-6.7-gnu/arch/powerpc/mm/book3s64/pgtable.c linux-libre-6.8-gnu/arch/powerpc/mm/book3s64/pgtable.c
index be229290a6a7..3438ab72c346 100644
--- linux-libre-6.7-gnu/arch/powerpc/mm/book3s64/pgtable.c
+++ linux-libre-6.8-gnu/arch/powerpc/mm/book3s64/pgtable.c
@@ -542,6 +542,7 @@ void ptep_modify_prot_commit(struct vm_area_struct *vma, unsigned long addr,
 	set_pte_at(vma->vm_mm, addr, ptep, pte);
 }
 
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 /*
  * For hash translation mode, we use the deposited table to store hash slot
  * information and they are stored at PTRS_PER_PMD offset from related pmd
@@ -563,6 +564,7 @@ int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
 
 	return true;
 }
+#endif
 
 /*
  * Does the CPU support tlbie?
diff --git linux-libre-6.7-gnu/arch/powerpc/mm/book3s64/pkeys.c linux-libre-6.8-gnu/arch/powerpc/mm/book3s64/pkeys.c
index 125733962033..a974baf8f327 100644
--- linux-libre-6.7-gnu/arch/powerpc/mm/book3s64/pkeys.c
+++ linux-libre-6.8-gnu/arch/powerpc/mm/book3s64/pkeys.c
@@ -89,7 +89,8 @@ static int __init scan_pkey_feature(void)
 			unsigned long pvr = mfspr(SPRN_PVR);
 
 			if (PVR_VER(pvr) == PVR_POWER8 || PVR_VER(pvr) == PVR_POWER8E ||
-			    PVR_VER(pvr) == PVR_POWER8NVL || PVR_VER(pvr) == PVR_POWER9)
+			    PVR_VER(pvr) == PVR_POWER8NVL || PVR_VER(pvr) == PVR_POWER9 ||
+			    PVR_VER(pvr) == PVR_HX_C2000)
 				pkeys_total = 32;
 		}
 	}
diff --git linux-libre-6.7-gnu/arch/powerpc/mm/hugetlbpage.c linux-libre-6.8-gnu/arch/powerpc/mm/hugetlbpage.c
index f7c683b672c1..0a540b37aab6 100644
--- linux-libre-6.7-gnu/arch/powerpc/mm/hugetlbpage.c
+++ linux-libre-6.8-gnu/arch/powerpc/mm/hugetlbpage.c
@@ -615,7 +615,7 @@ void __init gigantic_hugetlb_cma_reserve(void)
 		order = mmu_psize_to_shift(MMU_PAGE_16G) - PAGE_SHIFT;
 
 	if (order) {
-		VM_WARN_ON(order <= MAX_ORDER);
+		VM_WARN_ON(order <= MAX_PAGE_ORDER);
 		hugetlb_cma_reserve(order);
 	}
 }
diff --git linux-libre-6.7-gnu/arch/powerpc/mm/init-common.c linux-libre-6.8-gnu/arch/powerpc/mm/init-common.c
index 119ef491f797..d3a7726ecf51 100644
--- linux-libre-6.7-gnu/arch/powerpc/mm/init-common.c
+++ linux-libre-6.8-gnu/arch/powerpc/mm/init-common.c
@@ -126,7 +126,7 @@ void pgtable_cache_add(unsigned int shift)
 	 * as to leave enough 0 bits in the address to contain it. */
 	unsigned long minalign = max(MAX_PGTABLE_INDEX_SIZE + 1,
 				     HUGEPD_SHIFT_MASK + 1);
-	struct kmem_cache *new;
+	struct kmem_cache *new = NULL;
 
 	/* It would be nice if this was a BUILD_BUG_ON(), but at the
 	 * moment, gcc doesn't seem to recognize is_power_of_2 as a
@@ -139,7 +139,8 @@ void pgtable_cache_add(unsigned int shift)
 
 	align = max_t(unsigned long, align, minalign);
 	name = kasprintf(GFP_KERNEL, "pgtable-2^%d", shift);
-	new = kmem_cache_create(name, table_size, align, 0, ctor(shift));
+	if (name)
+		new = kmem_cache_create(name, table_size, align, 0, ctor(shift));
 	if (!new)
 		panic("Could not allocate pgtable cache for order %d", shift);
 
diff --git linux-libre-6.7-gnu/arch/powerpc/mm/kasan/init_32.c linux-libre-6.8-gnu/arch/powerpc/mm/kasan/init_32.c
index a70828a6d935..aa9aa11927b2 100644
--- linux-libre-6.7-gnu/arch/powerpc/mm/kasan/init_32.c
+++ linux-libre-6.8-gnu/arch/powerpc/mm/kasan/init_32.c
@@ -64,6 +64,7 @@ int __init __weak kasan_init_region(void *start, size_t size)
 	if (ret)
 		return ret;
 
+	k_start = k_start & PAGE_MASK;
 	block = memblock_alloc(k_end - k_start, PAGE_SIZE);
 	if (!block)
 		return -ENOMEM;
diff --git linux-libre-6.7-gnu/arch/powerpc/mm/mmu_decl.h linux-libre-6.8-gnu/arch/powerpc/mm/mmu_decl.h
index 7f9ff0640124..72341b9fb552 100644
--- linux-libre-6.7-gnu/arch/powerpc/mm/mmu_decl.h
+++ linux-libre-6.8-gnu/arch/powerpc/mm/mmu_decl.h
@@ -181,3 +181,8 @@ static inline bool debug_pagealloc_enabled_or_kfence(void)
 {
 	return IS_ENABLED(CONFIG_KFENCE) || debug_pagealloc_enabled();
 }
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+int create_section_mapping(unsigned long start, unsigned long end,
+			   int nid, pgprot_t prot);
+#endif
diff --git linux-libre-6.7-gnu/arch/powerpc/perf/core-book3s.c linux-libre-6.8-gnu/arch/powerpc/perf/core-book3s.c
index 10b946e9c6e7..b7ff680cde96 100644
--- linux-libre-6.7-gnu/arch/powerpc/perf/core-book3s.c
+++ linux-libre-6.8-gnu/arch/powerpc/perf/core-book3s.c
@@ -2312,7 +2312,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 			struct cpu_hw_events *cpuhw;
 			cpuhw = this_cpu_ptr(&cpu_hw_events);
 			power_pmu_bhrb_read(event, cpuhw);
-			perf_sample_save_brstack(&data, event, &cpuhw->bhrb_stack);
+			perf_sample_save_brstack(&data, event, &cpuhw->bhrb_stack, NULL);
 		}
 
 		if (event->attr.sample_type & PERF_SAMPLE_DATA_SRC &&
diff --git linux-libre-6.7-gnu/arch/powerpc/perf/hv-gpci.c linux-libre-6.8-gnu/arch/powerpc/perf/hv-gpci.c
index 39dbe6b348df..27f18119fda1 100644
--- linux-libre-6.7-gnu/arch/powerpc/perf/hv-gpci.c
+++ linux-libre-6.8-gnu/arch/powerpc/perf/hv-gpci.c
@@ -534,6 +534,9 @@ static ssize_t affinity_domain_via_partition_show(struct device *dev, struct dev
 	if (!ret)
 		goto parse_result;
 
+	if (ret && (ret != H_PARAMETER))
+		goto out;
+
 	/*
 	 * ret value as 'H_PARAMETER' implies that the current buffer size
 	 * can't accommodate all the information, and a partial buffer
diff --git linux-libre-6.7-gnu/arch/powerpc/perf/imc-pmu.c linux-libre-6.8-gnu/arch/powerpc/perf/imc-pmu.c
index 5d12ca386c1f..8664a7d297ad 100644
--- linux-libre-6.7-gnu/arch/powerpc/perf/imc-pmu.c
+++ linux-libre-6.8-gnu/arch/powerpc/perf/imc-pmu.c
@@ -299,6 +299,8 @@ static int update_events_in_group(struct device_node *node, struct imc_pmu *pmu)
 	attr_group->attrs = attrs;
 	do {
 		ev_val_str = kasprintf(GFP_KERNEL, "event=0x%x", pmu->events[i].value);
+		if (!ev_val_str)
+			continue;
 		dev_str = device_str_attr_create(pmu->events[i].name, ev_val_str);
 		if (!dev_str)
 			continue;
@@ -306,6 +308,8 @@ static int update_events_in_group(struct device_node *node, struct imc_pmu *pmu)
 		attrs[j++] = dev_str;
 		if (pmu->events[i].scale) {
 			ev_scale_str = kasprintf(GFP_KERNEL, "%s.scale", pmu->events[i].name);
+			if (!ev_scale_str)
+				continue;
 			dev_str = device_str_attr_create(ev_scale_str, pmu->events[i].scale);
 			if (!dev_str)
 				continue;
@@ -315,6 +319,8 @@ static int update_events_in_group(struct device_node *node, struct imc_pmu *pmu)
 
 		if (pmu->events[i].unit) {
 			ev_unit_str = kasprintf(GFP_KERNEL, "%s.unit", pmu->events[i].name);
+			if (!ev_unit_str)
+				continue;
 			dev_str = device_str_attr_create(ev_unit_str, pmu->events[i].unit);
 			if (!dev_str)
 				continue;
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/44x/Kconfig linux-libre-6.8-gnu/arch/powerpc/platforms/44x/Kconfig
index 1624ebf95497..35a1f4b9f827 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/44x/Kconfig
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/44x/Kconfig
@@ -173,6 +173,7 @@ config ISS4xx
 config CURRITUCK
 	bool "IBM Currituck (476fpe) Support"
 	depends on PPC_47x
+	select I2C
 	select SWIOTLB
 	select 476FPE
 	select FORCE_PCI
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/44x/idle.c linux-libre-6.8-gnu/arch/powerpc/platforms/44x/idle.c
index f533b495e7db..e2eeef8dff78 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/44x/idle.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/44x/idle.c
@@ -27,7 +27,7 @@ static void ppc44x_idle(void)
 	isync();
 }
 
-int __init ppc44x_idle_init(void)
+static int __init ppc44x_idle_init(void)
 {
 	if (!mode_spin) {
 		/* If we are not setting spin mode 
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c linux-libre-6.8-gnu/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
index 6f08d07aee3b..e995eb30bf09 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -17,6 +17,8 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 
+#include "mpc5121_ads.h"
+
 static struct device_node *cpld_pic_node;
 static struct irq_domain *cpld_pic_host;
 
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/512x/pdm360ng.c linux-libre-6.8-gnu/arch/powerpc/platforms/512x/pdm360ng.c
index ce51cfeeb066..8bbbf78bb42b 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/512x/pdm360ng.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/512x/pdm360ng.c
@@ -101,7 +101,7 @@ static inline void __init pdm360ng_touchscreen_init(void)
 }
 #endif /* CONFIG_TOUCHSCREEN_ADS7846 */
 
-void __init pdm360ng_init(void)
+static void __init pdm360ng_init(void)
 {
 	mpc512x_init();
 	pdm360ng_touchscreen_init();
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/83xx/suspend.c linux-libre-6.8-gnu/arch/powerpc/platforms/83xx/suspend.c
index 9833c36bda83..c9664e46b03d 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/83xx/suspend.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/83xx/suspend.c
@@ -261,9 +261,10 @@ static int mpc83xx_suspend_begin(suspend_state_t state)
 
 static int agent_thread_fn(void *data)
 {
+	set_freezable();
+
 	while (1) {
-		wait_event_interruptible(agent_wq, pci_pm_state >= 2);
-		try_to_freeze();
+		wait_event_freezable(agent_wq, pci_pm_state >= 2);
 
 		if (signal_pending(current) || pci_pm_state < 2)
 			continue;
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/mpc8536_ds.c linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/mpc8536_ds.c
index e966b2ad8ecd..b3327a358eb4 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -27,7 +27,7 @@
 
 #include "mpc85xx.h"
 
-void __init mpc8536_ds_pic_init(void)
+static void __init mpc8536_ds_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/mpc85xx_rdb.c linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index ec9f60fbebc7..e0cec670d8db 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -76,7 +76,7 @@ static void __init mpc85xx_rdb_setup_arch(void)
 			/* P1025 has pins muxed for QE and other functions. To
 			* enable QE UEC mode, we need to set bit QE0 for UCC1
 			* in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
-			* and QE12 for QE MII management singals in PMUXCR
+			* and QE12 for QE MII management signals in PMUXCR
 			* register.
 			*/
 				setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/mvme2500.c linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/mvme2500.c
index 1b59e45a0c64..19122daadb55 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/mvme2500.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/mvme2500.c
@@ -21,7 +21,7 @@
 
 #include "mpc85xx.h"
 
-void __init mvme2500_pic_init(void)
+static void __init mvme2500_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0,
 		  MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU,
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/p1010rdb.c linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/p1010rdb.c
index 10d6f1fa3327..491895ac8bcf 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/p1010rdb.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/p1010rdb.c
@@ -24,7 +24,7 @@
 
 #include "mpc85xx.h"
 
-void __init p1010_rdb_pic_init(void)
+static void __init p1010_rdb_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
 	  MPIC_SINGLE_DEST_CPU,
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/p1022_ds.c linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/p1022_ds.c
index 0dd786a061a6..adc3a2ee1415 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/p1022_ds.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -370,7 +370,7 @@ exit:
  *
  * @pixclock: the wavelength, in picoseconds, of the clock
  */
-void p1022ds_set_pixel_clock(unsigned int pixclock)
+static void p1022ds_set_pixel_clock(unsigned int pixclock)
 {
 	struct device_node *guts_np = NULL;
 	struct ccsr_guts __iomem *guts;
@@ -418,7 +418,7 @@ void p1022ds_set_pixel_clock(unsigned int pixclock)
 /**
  * p1022ds_valid_monitor_port: set the monitor port for sysfs
  */
-enum fsl_diu_monitor_port
+static enum fsl_diu_monitor_port
 p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
 {
 	switch (port) {
@@ -432,7 +432,7 @@ p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
 
 #endif
 
-void __init p1022_ds_pic_init(void)
+static void __init p1022_ds_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
 		MPIC_SINGLE_DEST_CPU,
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/p1022_rdk.c linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/p1022_rdk.c
index 25ab6e9c1470..6198299d95b1 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/p1022_rdk.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/p1022_rdk.c
@@ -40,7 +40,7 @@
  *
  * @pixclock: the wavelength, in picoseconds, of the clock
  */
-void p1022rdk_set_pixel_clock(unsigned int pixclock)
+static void p1022rdk_set_pixel_clock(unsigned int pixclock)
 {
 	struct device_node *guts_np = NULL;
 	struct ccsr_guts __iomem *guts;
@@ -88,7 +88,7 @@ void p1022rdk_set_pixel_clock(unsigned int pixclock)
 /**
  * p1022rdk_valid_monitor_port: set the monitor port for sysfs
  */
-enum fsl_diu_monitor_port
+static enum fsl_diu_monitor_port
 p1022rdk_valid_monitor_port(enum fsl_diu_monitor_port port)
 {
 	return FSL_DIU_PORT_DVI;
@@ -96,7 +96,7 @@ p1022rdk_valid_monitor_port(enum fsl_diu_monitor_port port)
 
 #endif
 
-void __init p1022_rdk_pic_init(void)
+static void __init p1022_rdk_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
 		MPIC_SINGLE_DEST_CPU,
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/socrates_fpga_pic.c linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
index baa12eff6d5d..60e0b8947ce6 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -8,6 +8,8 @@
 #include <linux/of_irq.h>
 #include <linux/io.h>
 
+#include "socrates_fpga_pic.h"
+
 /*
  * The FPGA supports 9 interrupt sources, which can be routed to 3
  * interrupt request lines of the MPIC. The line to be used can be
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/xes_mpc85xx.c linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index 45f257fc1ade..2582427d8d01 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -37,7 +37,7 @@
 #define MPC85xx_L2CTL_L2I		0x40000000 /* L2 flash invalidate */
 #define MPC85xx_L2CTL_L2SIZ_MASK	0x30000000 /* L2 SRAM size (R/O) */
 
-void __init xes_mpc85xx_pic_init(void)
+static void __init xes_mpc85xx_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/86xx/Kconfig linux-libre-6.8-gnu/arch/powerpc/platforms/86xx/Kconfig
index 67467cd6f34c..06b1e5c49d6f 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/86xx/Kconfig
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/86xx/Kconfig
@@ -52,10 +52,3 @@ config MPC8641
 	select MPIC
 	default y if GEF_SBC610 || GEF_SBC310 || GEF_PPC9A \
 			|| MVME7100
-
-config MPC8610
-	bool
-	select HAVE_PCI
-	select FSL_PCI if PCI
-	select PPC_UDBG_16550
-	select MPIC
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/cell/spufs/inode.c linux-libre-6.8-gnu/arch/powerpc/platforms/cell/spufs/inode.c
index 10c1320adfd0..030de2b8c145 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/cell/spufs/inode.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/cell/spufs/inode.c
@@ -145,10 +145,11 @@ spufs_evict_inode(struct inode *inode)
 
 static void spufs_prune_dir(struct dentry *dir)
 {
-	struct dentry *dentry, *tmp;
+	struct dentry *dentry;
+	struct hlist_node *n;
 
 	inode_lock(d_inode(dir));
-	list_for_each_entry_safe(dentry, tmp, &dir->d_subdirs, d_child) {
+	hlist_for_each_entry_safe(dentry, n, &dir->d_children, d_sib) {
 		spin_lock(&dentry->d_lock);
 		if (simple_positive(dentry)) {
 			dget_dlock(dentry);
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/pasemi/setup.c linux-libre-6.8-gnu/arch/powerpc/platforms/pasemi/setup.c
index ef985ba2bf21..0761d98e5be3 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/pasemi/setup.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/pasemi/setup.c
@@ -64,7 +64,7 @@ static void __noreturn pas_restart(char *cmd)
 }
 
 #ifdef CONFIG_PPC_PASEMI_NEMO
-void pas_shutdown(void)
+static void pas_shutdown(void)
 {
 	/* Set the PLD bit that makes the SB600 think the power button is being pressed */
 	void __iomem *pld_map = ioremap(0xf5000000,4096);
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/powermac/smp.c linux-libre-6.8-gnu/arch/powerpc/platforms/powermac/smp.c
index c83d1e14077e..15644be31990 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/powermac/smp.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/powermac/smp.c
@@ -413,7 +413,7 @@ static void __init smp_psurge_setup_cpu(int cpu_nr)
 		printk(KERN_ERR "Couldn't get primary IPI interrupt");
 }
 
-void __init smp_psurge_take_timebase(void)
+static void __init smp_psurge_take_timebase(void)
 {
 	if (psurge_type != PSURGE_DUAL)
 		return;
@@ -429,7 +429,7 @@ void __init smp_psurge_take_timebase(void)
 	set_dec(tb_ticks_per_jiffy/2);
 }
 
-void __init smp_psurge_give_timebase(void)
+static void __init smp_psurge_give_timebase(void)
 {
 	/* Nothing to do here */
 }
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/opal-irqchip.c linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/opal-irqchip.c
index f9a7001dacb7..56a1f7ce78d2 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/opal-irqchip.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/opal-irqchip.c
@@ -275,6 +275,8 @@ int __init opal_event_init(void)
 		else
 			name = kasprintf(GFP_KERNEL, "opal");
 
+		if (!name)
+			continue;
 		/* Install interrupt handler */
 		rc = request_irq(r->start, opal_interrupt, r->flags & IRQD_TRIGGER_MASK,
 				 name, NULL);
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/opal-powercap.c linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/opal-powercap.c
index 7bfe4cbeb35a..ea917266aa17 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/opal-powercap.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/opal-powercap.c
@@ -196,6 +196,12 @@ void __init opal_powercap_init(void)
 
 		j = 0;
 		pcaps[i].pg.name = kasprintf(GFP_KERNEL, "%pOFn", node);
+		if (!pcaps[i].pg.name) {
+			kfree(pcaps[i].pattrs);
+			kfree(pcaps[i].pg.attrs);
+			goto out_pcaps_pattrs;
+		}
+
 		if (has_min) {
 			powercap_add_attr(min, "powercap-min",
 					  &pcaps[i].pattrs[j]);
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/opal-prd.c linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/opal-prd.c
index 327e2f76905d..b66b06efcef1 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/opal-prd.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/opal-prd.c
@@ -66,6 +66,8 @@ static bool opal_prd_range_is_valid(uint64_t addr, uint64_t size)
 		const char *label;
 
 		addrp = of_get_address(node, 0, &range_size, NULL);
+		if (!addrp)
+			continue;
 
 		range_addr = of_read_number(addrp, 2);
 		range_end = range_addr + range_size;
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/opal-xscom.c linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/opal-xscom.c
index 262cd6fac907..748c2b97fa53 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/opal-xscom.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/opal-xscom.c
@@ -165,6 +165,11 @@ static int scom_debug_init_one(struct dentry *root, struct device_node *dn,
 	ent->chip = chip;
 	snprintf(ent->name, 16, "%08x", chip);
 	ent->path.data = (void *)kasprintf(GFP_KERNEL, "%pOF", dn);
+	if (!ent->path.data) {
+		kfree(ent);
+		return -ENOMEM;
+	}
+
 	ent->path.size = strlen((char *)ent->path.data);
 
 	dir = debugfs_create_dir(ent->name, root);
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/opal.c linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/opal.c
index cdf3838f08d3..45dd77e3ccf6 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/opal.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/opal.c
@@ -424,7 +424,7 @@ static int __init opal_message_init(struct device_node *opal_node)
 	return 0;
 }
 
-int opal_get_chars(uint32_t vtermno, char *buf, int count)
+ssize_t opal_get_chars(uint32_t vtermno, u8 *buf, size_t count)
 {
 	s64 rc;
 	__be64 evt, len;
@@ -441,10 +441,11 @@ int opal_get_chars(uint32_t vtermno, char *buf, int count)
 	return 0;
 }
 
-static int __opal_put_chars(uint32_t vtermno, const char *data, int total_len, bool atomic)
+static ssize_t __opal_put_chars(uint32_t vtermno, const u8 *data,
+				size_t total_len, bool atomic)
 {
 	unsigned long flags = 0 /* shut up gcc */;
-	int written;
+	ssize_t written;
 	__be64 olen;
 	s64 rc;
 
@@ -484,7 +485,7 @@ static int __opal_put_chars(uint32_t vtermno, const char *data, int total_len, b
 		if (atomic) {
 			/* Should not happen */
 			pr_warn("atomic console write returned partial "
-				"len=%d written=%d\n", total_len, written);
+				"len=%zu written=%zd\n", total_len, written);
 		}
 		if (!written)
 			written = -EAGAIN;
@@ -497,7 +498,7 @@ out:
 	return written;
 }
 
-int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
+ssize_t opal_put_chars(uint32_t vtermno, const u8 *data, size_t total_len)
 {
 	return __opal_put_chars(vtermno, data, total_len, false);
 }
@@ -508,7 +509,8 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
  * true at the moment because console space can race with OPAL's console
  * writes.
  */
-int opal_put_chars_atomic(uint32_t vtermno, const char *data, int total_len)
+ssize_t opal_put_chars_atomic(uint32_t vtermno, const u8 *data,
+			      size_t total_len)
 {
 	return __opal_put_chars(vtermno, data, total_len, true);
 }
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/pci-ioda.c linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/pci-ioda.c
index 28fac4770073..23f5b5093ec1 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/pci-ioda.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1389,7 +1389,7 @@ static long pnv_pci_ioda2_setup_default_config(struct pnv_ioda_pe *pe)
 	 * DMA window can be larger than available memory, which will
 	 * cause errors later.
 	 */
-	const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_ORDER);
+	const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_PAGE_ORDER);
 
 	/*
 	 * We create the default window as big as we can. The constraint is
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/subcore.c linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/subcore.c
index 191424468f10..393e747541fb 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/powernv/subcore.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/powernv/subcore.c
@@ -425,7 +425,8 @@ static int subcore_init(void)
 
 	if (pvr_ver != PVR_POWER8 &&
 	    pvr_ver != PVR_POWER8E &&
-	    pvr_ver != PVR_POWER8NVL)
+	    pvr_ver != PVR_POWER8NVL &&
+	    pvr_ver != PVR_HX_C2000)
 		return 0;
 
 	/*
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/ps3/Kconfig linux-libre-6.8-gnu/arch/powerpc/platforms/ps3/Kconfig
index a44869e5ea70..e9c1087dd42e 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/ps3/Kconfig
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/ps3/Kconfig
@@ -167,16 +167,4 @@ config PS3_LPM
 	  profiling support of the Cell processor with programs like
 	  perfmon2, then say Y or M, otherwise say N.
 
-config PS3GELIC_UDBG
-	bool "PS3 udbg output via UDP broadcasts on Ethernet"
-	depends on PPC_PS3
-	help
-	  Enables udbg early debugging output by sending broadcast UDP
-	  via the Ethernet port (UDP port number 18194).
-
-	  This driver uses a trivial implementation and is independent
-	  from the main PS3 gelic network driver.
-
-	  If in doubt, say N here.
-
 endmenu
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/ps3/Makefile linux-libre-6.8-gnu/arch/powerpc/platforms/ps3/Makefile
index 86bf2967a8d4..bc79bb124d1e 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/ps3/Makefile
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/ps3/Makefile
@@ -3,7 +3,7 @@ obj-y += setup.o mm.o time.o hvcall.o htab.o repository.o
 obj-y += interrupt.o exports.o os-area.o
 obj-y += system-bus.o
 
-obj-$(CONFIG_PS3GELIC_UDBG) += gelic_udbg.o
+obj-$(CONFIG_PPC_EARLY_DEBUG_PS3GELIC) += gelic_udbg.o
 obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_SPU_BASE) += spu.o
 obj-y += device-init.o
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/ps3/device-init.c linux-libre-6.8-gnu/arch/powerpc/platforms/ps3/device-init.c
index e87360a0fb40..878bc160246e 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/ps3/device-init.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/ps3/device-init.c
@@ -827,6 +827,7 @@ static int ps3_probe_thread(void *data)
 	if (res)
 		goto fail_free_irq;
 
+	set_freezable();
 	/* Loop here processing the requested notification events. */
 	do {
 		try_to_freeze();
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/ps3/gelic_udbg.c linux-libre-6.8-gnu/arch/powerpc/platforms/ps3/gelic_udbg.c
index 6b298010fd84..a5202c18c236 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/ps3/gelic_udbg.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/ps3/gelic_udbg.c
@@ -14,6 +14,7 @@
 #include <linux/ip.h>
 #include <linux/udp.h>
 
+#include <asm/ps3.h>
 #include <asm/io.h>
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/Makefile linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/Makefile
index 1476c5e4433c..f936962a2946 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/Makefile
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/Makefile
@@ -4,6 +4,7 @@ ccflags-$(CONFIG_PPC_PSERIES_DEBUG)	+= -DDEBUG
 
 obj-y			:= lpar.o hvCall.o nvram.o reconfig.o \
 			   of_helpers.o rtas-work-area.o papr-sysparm.o \
+			   papr-vpd.o \
 			   setup.o iommu.o event_sources.o ras.o \
 			   firmware.o power.o dlpar.o mobility.o rng.o \
 			   pci.o pci_dlpar.o eeh_pseries.o msi.o \
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/eeh_pseries.c linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/eeh_pseries.c
index def184da51cf..b1ae0c0d1187 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -252,7 +252,7 @@ static int pseries_eeh_cap_start(struct pci_dn *pdn)
 	if (!pdn)
 		return 0;
 
-	rtas_read_config(pdn, PCI_STATUS, 2, &status);
+	rtas_pci_dn_read_config(pdn, PCI_STATUS, 2, &status);
 	if (!(status & PCI_STATUS_CAP_LIST))
 		return 0;
 
@@ -270,11 +270,11 @@ static int pseries_eeh_find_cap(struct pci_dn *pdn, int cap)
 		return 0;
 
         while (cnt--) {
-		rtas_read_config(pdn, pos, 1, &pos);
+		rtas_pci_dn_read_config(pdn, pos, 1, &pos);
 		if (pos < 0x40)
 			break;
 		pos &= ~3;
-		rtas_read_config(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
+		rtas_pci_dn_read_config(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
 		if (id == 0xff)
 			break;
 		if (id == cap)
@@ -294,7 +294,7 @@ static int pseries_eeh_find_ecap(struct pci_dn *pdn, int cap)
 
 	if (!edev || !edev->pcie_cap)
 		return 0;
-	if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+	if (rtas_pci_dn_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
 		return 0;
 	else if (!header)
 		return 0;
@@ -307,7 +307,7 @@ static int pseries_eeh_find_ecap(struct pci_dn *pdn, int cap)
 		if (pos < 256)
 			break;
 
-		if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+		if (rtas_pci_dn_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
 			break;
 	}
 
@@ -412,8 +412,8 @@ static void pseries_eeh_init_edev(struct pci_dn *pdn)
 	if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
 		edev->mode |= EEH_DEV_BRIDGE;
 		if (edev->pcie_cap) {
-			rtas_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
-					 2, &pcie_flags);
+			rtas_pci_dn_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
+						2, &pcie_flags);
 			pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
 			if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
 				edev->mode |= EEH_DEV_ROOT_PORT;
@@ -676,7 +676,7 @@ static int pseries_eeh_read_config(struct eeh_dev *edev, int where, int size, u3
 {
 	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 
-	return rtas_read_config(pdn, where, size, val);
+	return rtas_pci_dn_read_config(pdn, where, size, val);
 }
 
 /**
@@ -692,7 +692,7 @@ static int pseries_eeh_write_config(struct eeh_dev *edev, int where, int size, u
 {
 	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 
-	return rtas_write_config(pdn, where, size, val);
+	return rtas_pci_dn_write_config(pdn, where, size, val);
 }
 
 #ifdef CONFIG_PCI_IOV
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/hotplug-memory.c linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/hotplug-memory.c
index a43bfb01720a..3fe3ddb30c04 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -208,8 +208,10 @@ static int dlpar_change_lmb_state(struct drmem_lmb *lmb, bool online)
 	int rc;
 
 	mem_block = lmb_to_memblock(lmb);
-	if (!mem_block)
+	if (!mem_block) {
+		pr_err("Failed memory block lookup for LMB 0x%x\n", lmb->drc_index);
 		return -EINVAL;
+	}
 
 	if (online && mem_block->dev.offline)
 		rc = device_online(&mem_block->dev);
@@ -436,14 +438,15 @@ static int dlpar_memory_remove_by_index(u32 drc_index)
 		}
 	}
 
-	if (!lmb_found)
+	if (!lmb_found) {
+		pr_debug("Failed to look up LMB for drc index %x\n", drc_index);
 		rc = -EINVAL;
-
-	if (rc)
+	} else if (rc) {
 		pr_debug("Failed to hot-remove memory at %llx\n",
 			 lmb->base_addr);
-	else
+	} else {
 		pr_debug("Memory at %llx was hot-removed\n", lmb->base_addr);
+	}
 
 	return rc;
 }
@@ -575,6 +578,7 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
 	rc = update_lmb_associativity_index(lmb);
 	if (rc) {
 		dlpar_release_drc(lmb->drc_index);
+		pr_err("Failed to configure LMB 0x%x\n", lmb->drc_index);
 		return rc;
 	}
 
@@ -588,12 +592,14 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
 	/* Add the memory */
 	rc = __add_memory(nid, lmb->base_addr, block_sz, MHP_MEMMAP_ON_MEMORY);
 	if (rc) {
+		pr_err("Failed to add LMB 0x%x to node %u", lmb->drc_index, nid);
 		invalidate_lmb_associativity_index(lmb);
 		return rc;
 	}
 
 	rc = dlpar_online_lmb(lmb);
 	if (rc) {
+		pr_err("Failed to online LMB 0x%x on node %u\n", lmb->drc_index, nid);
 		__remove_memory(lmb->base_addr, block_sz);
 		invalidate_lmb_associativity_index(lmb);
 	} else {
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/hvconsole.c linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/hvconsole.c
index 1ac52963e08b..8803c947998e 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/hvconsole.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/hvconsole.c
@@ -25,7 +25,7 @@
  *	firmware.
  * @count: not used?
  */
-int hvc_get_chars(uint32_t vtermno, char *buf, int count)
+ssize_t hvc_get_chars(uint32_t vtermno, u8 *buf, size_t count)
 {
 	long ret;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
@@ -52,7 +52,7 @@ EXPORT_SYMBOL(hvc_get_chars);
  *	firmware. Must be at least 16 bytes, even if count is less than 16.
  * @count: Send this number of characters.
  */
-int hvc_put_chars(uint32_t vtermno, const char *buf, int count)
+ssize_t hvc_put_chars(uint32_t vtermno, const u8 *buf, size_t count)
 {
 	unsigned long *lbuf = (unsigned long *) buf;
 	long ret;
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/iommu.c linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/iommu.c
index 496e16c588aa..e8c4129697b1 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/iommu.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/iommu.c
@@ -574,29 +574,6 @@ static void iommu_table_setparms(struct pci_controller *phb,
 
 struct iommu_table_ops iommu_table_lpar_multi_ops;
 
-/*
- * iommu_table_setparms_lpar
- *
- * Function: On pSeries LPAR systems, return TCE table info, given a pci bus.
- */
-static void iommu_table_setparms_lpar(struct pci_controller *phb,
-				      struct device_node *dn,
-				      struct iommu_table *tbl,
-				      struct iommu_table_group *table_group,
-				      const __be32 *dma_window)
-{
-	unsigned long offset, size, liobn;
-
-	of_parse_dma_window(dn, dma_window, &liobn, &offset, &size);
-
-	iommu_table_setparms_common(tbl, phb->bus->number, liobn, offset, size, IOMMU_PAGE_SHIFT_4K, NULL,
-				    &iommu_table_lpar_multi_ops);
-
-
-	table_group->tce32_start = offset;
-	table_group->tce32_size = size;
-}
-
 struct iommu_table_ops iommu_table_pseries_ops = {
 	.set = tce_build_pSeries,
 	.clear = tce_free_pSeries,
@@ -724,26 +701,71 @@ struct iommu_table_ops iommu_table_lpar_multi_ops = {
  * dynamic 64bit DMA window, walking up the device tree.
  */
 static struct device_node *pci_dma_find(struct device_node *dn,
-					const __be32 **dma_window)
+					struct dynamic_dma_window_prop *prop)
 {
-	const __be32 *dw = NULL;
+	const __be32 *default_prop = NULL;
+	const __be32 *ddw_prop = NULL;
+	struct device_node *rdn = NULL;
+	bool default_win = false, ddw_win = false;
 
 	for ( ; dn && PCI_DN(dn); dn = dn->parent) {
-		dw = of_get_property(dn, "ibm,dma-window", NULL);
-		if (dw) {
-			if (dma_window)
-				*dma_window = dw;
-			return dn;
+		default_prop = of_get_property(dn, "ibm,dma-window", NULL);
+		if (default_prop) {
+			rdn = dn;
+			default_win = true;
+		}
+		ddw_prop = of_get_property(dn, DIRECT64_PROPNAME, NULL);
+		if (ddw_prop) {
+			rdn = dn;
+			ddw_win = true;
+			break;
+		}
+		ddw_prop = of_get_property(dn, DMA64_PROPNAME, NULL);
+		if (ddw_prop) {
+			rdn = dn;
+			ddw_win = true;
+			break;
 		}
-		dw = of_get_property(dn, DIRECT64_PROPNAME, NULL);
-		if (dw)
-			return dn;
-		dw = of_get_property(dn, DMA64_PROPNAME, NULL);
-		if (dw)
-			return dn;
+
+		/* At least found default window, which is the case for normal boot */
+		if (default_win)
+			break;
 	}
 
-	return NULL;
+	/* For PCI devices there will always be a DMA window, either on the device
+	 * or parent bus
+	 */
+	WARN_ON(!(default_win | ddw_win));
+
+	/* caller doesn't want to get DMA window property */
+	if (!prop)
+		return rdn;
+
+	/* parse DMA window property. During normal system boot, only default
+	 * DMA window is passed in OF. But, for kdump, a dedicated adapter might
+	 * have both default and DDW in FDT. In this scenario, DDW takes precedence
+	 * over default window.
+	 */
+	if (ddw_win) {
+		struct dynamic_dma_window_prop *p;
+
+		p = (struct dynamic_dma_window_prop *)ddw_prop;
+		prop->liobn = p->liobn;
+		prop->dma_base = p->dma_base;
+		prop->tce_shift = p->tce_shift;
+		prop->window_shift = p->window_shift;
+	} else if (default_win) {
+		unsigned long offset, size, liobn;
+
+		of_parse_dma_window(rdn, default_prop, &liobn, &offset, &size);
+
+		prop->liobn = cpu_to_be32((u32)liobn);
+		prop->dma_base = cpu_to_be64(offset);
+		prop->tce_shift = cpu_to_be32(IOMMU_PAGE_SHIFT_4K);
+		prop->window_shift = cpu_to_be32(order_base_2(size));
+	}
+
+	return rdn;
 }
 
 static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
@@ -751,17 +773,20 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
 	struct iommu_table *tbl;
 	struct device_node *dn, *pdn;
 	struct pci_dn *ppci;
-	const __be32 *dma_window = NULL;
+	struct dynamic_dma_window_prop prop;
 
 	dn = pci_bus_to_OF_node(bus);
 
 	pr_debug("pci_dma_bus_setup_pSeriesLP: setting up bus %pOF\n",
 		 dn);
 
-	pdn = pci_dma_find(dn, &dma_window);
+	pdn = pci_dma_find(dn, &prop);
 
-	if (dma_window == NULL)
-		pr_debug("  no ibm,dma-window property !\n");
+	/* In PPC architecture, there will always be DMA window on bus or one of the
+	 * parent bus. During reboot, there will be ibm,dma-window property to
+	 * define DMA window. For kdump, there will at least be default window or DDW
+	 * or both.
+	 */
 
 	ppci = PCI_DN(pdn);
 
@@ -771,13 +796,24 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
 	if (!ppci->table_group) {
 		ppci->table_group = iommu_pseries_alloc_group(ppci->phb->node);
 		tbl = ppci->table_group->tables[0];
-		if (dma_window) {
-			iommu_table_setparms_lpar(ppci->phb, pdn, tbl,
-						  ppci->table_group, dma_window);
 
-			if (!iommu_init_table(tbl, ppci->phb->node, 0, 0))
-				panic("Failed to initialize iommu table");
-		}
+		iommu_table_setparms_common(tbl, ppci->phb->bus->number,
+				be32_to_cpu(prop.liobn),
+				be64_to_cpu(prop.dma_base),
+				1ULL << be32_to_cpu(prop.window_shift),
+				be32_to_cpu(prop.tce_shift), NULL,
+				&iommu_table_lpar_multi_ops);
+
+		/* Only for normal boot with default window. Doesn't matter even
+		 * if we set these with DDW which is 64bit during kdump, since
+		 * these will not be used during kdump.
+		 */
+		ppci->table_group->tce32_start = be64_to_cpu(prop.dma_base);
+		ppci->table_group->tce32_size = 1 << be32_to_cpu(prop.window_shift);
+
+		if (!iommu_init_table(tbl, ppci->phb->node, 0, 0))
+			panic("Failed to initialize iommu table");
+
 		iommu_register_group(ppci->table_group,
 				pci_domain_nr(bus), 0);
 		pr_debug("  created table: %p\n", ppci->table_group);
@@ -968,6 +1004,12 @@ static void find_existing_ddw_windows_named(const char *name)
 			continue;
 		}
 
+		/* If at the time of system initialization, there are DDWs in OF,
+		 * it means this is during kexec. DDW could be direct or dynamic.
+		 * We will just mark DDWs as "dynamic" since this is kdump path,
+		 * no need to worry about perforance. ddw_list_new_entry() will
+		 * set window->direct = false.
+		 */
 		window = ddw_list_new_entry(pdn, dma64);
 		if (!window) {
 			of_node_put(pdn);
@@ -1524,8 +1566,8 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 {
 	struct device_node *pdn, *dn;
 	struct iommu_table *tbl;
-	const __be32 *dma_window = NULL;
 	struct pci_dn *pci;
+	struct dynamic_dma_window_prop prop;
 
 	pr_debug("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev));
 
@@ -1538,7 +1580,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 	dn = pci_device_to_OF_node(dev);
 	pr_debug("  node is %pOF\n", dn);
 
-	pdn = pci_dma_find(dn, &dma_window);
+	pdn = pci_dma_find(dn, &prop);
 	if (!pdn || !PCI_DN(pdn)) {
 		printk(KERN_WARNING "pci_dma_dev_setup_pSeriesLP: "
 		       "no DMA window found for pci dev=%s dn=%pOF\n",
@@ -1551,8 +1593,20 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 	if (!pci->table_group) {
 		pci->table_group = iommu_pseries_alloc_group(pci->phb->node);
 		tbl = pci->table_group->tables[0];
-		iommu_table_setparms_lpar(pci->phb, pdn, tbl,
-				pci->table_group, dma_window);
+
+		iommu_table_setparms_common(tbl, pci->phb->bus->number,
+				be32_to_cpu(prop.liobn),
+				be64_to_cpu(prop.dma_base),
+				1ULL << be32_to_cpu(prop.window_shift),
+				be32_to_cpu(prop.tce_shift), NULL,
+				&iommu_table_lpar_multi_ops);
+
+		/* Only for normal boot with default window. Doesn't matter even
+		 * if we set these with DDW which is 64bit during kdump, since
+		 * these will not be used during kdump.
+		 */
+		pci->table_group->tce32_start = be64_to_cpu(prop.dma_base);
+		pci->table_group->tce32_size = 1 << be32_to_cpu(prop.window_shift);
 
 		iommu_init_table(tbl, pci->phb->node, 0, 0);
 		iommu_register_group(pci->table_group,
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/lpar.c linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/lpar.c
index 4561667832ed..4e9916bb03d7 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/lpar.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/lpar.c
@@ -662,8 +662,12 @@ u64 pseries_paravirt_steal_clock(int cpu)
 {
 	struct lppaca *lppaca = &lppaca_of(cpu);
 
-	return be64_to_cpu(READ_ONCE(lppaca->enqueue_dispatch_tb)) +
-		be64_to_cpu(READ_ONCE(lppaca->ready_enqueue_tb));
+	/*
+	 * VPA steal time counters are reported at TB frequency. Hence do a
+	 * conversion to ns before returning
+	 */
+	return tb_to_ns(be64_to_cpu(READ_ONCE(lppaca->enqueue_dispatch_tb)) +
+			be64_to_cpu(READ_ONCE(lppaca->ready_enqueue_tb)));
 }
 #endif
 
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/papr-sysparm.c linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/papr-sysparm.c
index fedc61599e6c..7063ce8884e4 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/papr-sysparm.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/papr-sysparm.c
@@ -2,14 +2,20 @@
 
 #define pr_fmt(fmt)	"papr-sysparm: " fmt
 
+#include <linux/anon_inodes.h>
 #include <linux/bug.h>
+#include <linux/file.h>
+#include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/miscdevice.h>
 #include <linux/printk.h>
 #include <linux/slab.h>
-#include <asm/rtas.h>
+#include <linux/uaccess.h>
+#include <asm/machdep.h>
 #include <asm/papr-sysparm.h>
 #include <asm/rtas-work-area.h>
+#include <asm/rtas.h>
 
 struct papr_sysparm_buf *papr_sysparm_buf_alloc(void)
 {
@@ -23,6 +29,46 @@ void papr_sysparm_buf_free(struct papr_sysparm_buf *buf)
 	kfree(buf);
 }
 
+static size_t papr_sysparm_buf_get_length(const struct papr_sysparm_buf *buf)
+{
+	return be16_to_cpu(buf->len);
+}
+
+static void papr_sysparm_buf_set_length(struct papr_sysparm_buf *buf, size_t length)
+{
+	WARN_ONCE(length > sizeof(buf->val),
+		  "bogus length %zu, clamping to safe value", length);
+	length = min(sizeof(buf->val), length);
+	buf->len = cpu_to_be16(length);
+}
+
+/*
+ * For use on buffers returned from ibm,get-system-parameter before
+ * returning them to callers. Ensures the encoded length of valid data
+ * cannot overrun buf->val[].
+ */
+static void papr_sysparm_buf_clamp_length(struct papr_sysparm_buf *buf)
+{
+	papr_sysparm_buf_set_length(buf, papr_sysparm_buf_get_length(buf));
+}
+
+/*
+ * Perform some basic diligence on the system parameter buffer before
+ * submitting it to RTAS.
+ */
+static bool papr_sysparm_buf_can_submit(const struct papr_sysparm_buf *buf)
+{
+	/*
+	 * Firmware ought to reject buffer lengths that exceed the
+	 * maximum specified in PAPR, but there's no reason for the
+	 * kernel to allow them either.
+	 */
+	if (papr_sysparm_buf_get_length(buf) > sizeof(buf->val))
+		return false;
+
+	return true;
+}
+
 /**
  * papr_sysparm_get() - Retrieve the value of a PAPR system parameter.
  * @param: PAPR system parameter token as described in
@@ -47,7 +93,6 @@ void papr_sysparm_buf_free(struct papr_sysparm_buf *buf)
  *
  * Return: 0 on success, -errno otherwise. @buf is unmodified on error.
  */
-
 int papr_sysparm_get(papr_sysparm_t param, struct papr_sysparm_buf *buf)
 {
 	const s32 token = rtas_function_token(RTAS_FN_IBM_GET_SYSTEM_PARAMETER);
@@ -63,6 +108,9 @@ int papr_sysparm_get(papr_sysparm_t param, struct papr_sysparm_buf *buf)
 	if (token == RTAS_UNKNOWN_SERVICE)
 		return -ENOENT;
 
+	if (!papr_sysparm_buf_can_submit(buf))
+		return -EINVAL;
+
 	work_area = rtas_work_area_alloc(sizeof(*buf));
 
 	memcpy(rtas_work_area_raw_buf(work_area), buf, sizeof(*buf));
@@ -77,6 +125,7 @@ int papr_sysparm_get(papr_sysparm_t param, struct papr_sysparm_buf *buf)
 	case 0:
 		ret = 0;
 		memcpy(buf, rtas_work_area_raw_buf(work_area), sizeof(*buf));
+		papr_sysparm_buf_clamp_length(buf);
 		break;
 	case -3: /* parameter not implemented */
 		ret = -EOPNOTSUPP;
@@ -115,6 +164,9 @@ int papr_sysparm_set(papr_sysparm_t param, const struct papr_sysparm_buf *buf)
 	if (token == RTAS_UNKNOWN_SERVICE)
 		return -ENOENT;
 
+	if (!papr_sysparm_buf_can_submit(buf))
+		return -EINVAL;
+
 	work_area = rtas_work_area_alloc(sizeof(*buf));
 
 	memcpy(rtas_work_area_raw_buf(work_area), buf, sizeof(*buf));
@@ -149,3 +201,152 @@ int papr_sysparm_set(papr_sysparm_t param, const struct papr_sysparm_buf *buf)
 
 	return ret;
 }
+
+static struct papr_sysparm_buf *
+papr_sysparm_buf_from_user(const struct papr_sysparm_io_block __user *user_iob)
+{
+	struct papr_sysparm_buf *kern_spbuf;
+	long err;
+	u16 len;
+
+	/*
+	 * The length of valid data that userspace claims to be in
+	 * user_iob->data[].
+	 */
+	if (get_user(len, &user_iob->length))
+		return ERR_PTR(-EFAULT);
+
+	static_assert(sizeof(user_iob->data) >= PAPR_SYSPARM_MAX_INPUT);
+	static_assert(sizeof(kern_spbuf->val) >= PAPR_SYSPARM_MAX_INPUT);
+
+	if (len > PAPR_SYSPARM_MAX_INPUT)
+		return ERR_PTR(-EINVAL);
+
+	kern_spbuf = papr_sysparm_buf_alloc();
+	if (!kern_spbuf)
+		return ERR_PTR(-ENOMEM);
+
+	papr_sysparm_buf_set_length(kern_spbuf, len);
+
+	if (len > 0 && copy_from_user(kern_spbuf->val, user_iob->data, len)) {
+		err = -EFAULT;
+		goto free_sysparm_buf;
+	}
+
+	return kern_spbuf;
+
+free_sysparm_buf:
+	papr_sysparm_buf_free(kern_spbuf);
+	return ERR_PTR(err);
+}
+
+static int papr_sysparm_buf_to_user(const struct papr_sysparm_buf *kern_spbuf,
+				    struct papr_sysparm_io_block __user *user_iob)
+{
+	u16 len_out = papr_sysparm_buf_get_length(kern_spbuf);
+
+	if (put_user(len_out, &user_iob->length))
+		return -EFAULT;
+
+	static_assert(sizeof(user_iob->data) >= PAPR_SYSPARM_MAX_OUTPUT);
+	static_assert(sizeof(kern_spbuf->val) >= PAPR_SYSPARM_MAX_OUTPUT);
+
+	if (copy_to_user(user_iob->data, kern_spbuf->val, PAPR_SYSPARM_MAX_OUTPUT))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long papr_sysparm_ioctl_get(struct papr_sysparm_io_block __user *user_iob)
+{
+	struct papr_sysparm_buf *kern_spbuf;
+	papr_sysparm_t param;
+	long ret;
+
+	if (get_user(param.token, &user_iob->parameter))
+		return -EFAULT;
+
+	kern_spbuf = papr_sysparm_buf_from_user(user_iob);
+	if (IS_ERR(kern_spbuf))
+		return PTR_ERR(kern_spbuf);
+
+	ret = papr_sysparm_get(param, kern_spbuf);
+	if (ret)
+		goto free_sysparm_buf;
+
+	ret = papr_sysparm_buf_to_user(kern_spbuf, user_iob);
+	if (ret)
+		goto free_sysparm_buf;
+
+	ret = 0;
+
+free_sysparm_buf:
+	papr_sysparm_buf_free(kern_spbuf);
+	return ret;
+}
+
+
+static long papr_sysparm_ioctl_set(struct papr_sysparm_io_block __user *user_iob)
+{
+	struct papr_sysparm_buf *kern_spbuf;
+	papr_sysparm_t param;
+	long ret;
+
+	if (get_user(param.token, &user_iob->parameter))
+		return -EFAULT;
+
+	kern_spbuf = papr_sysparm_buf_from_user(user_iob);
+	if (IS_ERR(kern_spbuf))
+		return PTR_ERR(kern_spbuf);
+
+	ret = papr_sysparm_set(param, kern_spbuf);
+	if (ret)
+		goto free_sysparm_buf;
+
+	ret = 0;
+
+free_sysparm_buf:
+	papr_sysparm_buf_free(kern_spbuf);
+	return ret;
+}
+
+static long papr_sysparm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg)
+{
+	void __user *argp = (__force void __user *)arg;
+	long ret;
+
+	switch (ioctl) {
+	case PAPR_SYSPARM_IOC_GET:
+		ret = papr_sysparm_ioctl_get(argp);
+		break;
+	case PAPR_SYSPARM_IOC_SET:
+		if (filp->f_mode & FMODE_WRITE)
+			ret = papr_sysparm_ioctl_set(argp);
+		else
+			ret = -EBADF;
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+	return ret;
+}
+
+static const struct file_operations papr_sysparm_ops = {
+	.unlocked_ioctl = papr_sysparm_ioctl,
+};
+
+static struct miscdevice papr_sysparm_dev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "papr-sysparm",
+	.fops = &papr_sysparm_ops,
+};
+
+static __init int papr_sysparm_init(void)
+{
+	if (!rtas_function_implemented(RTAS_FN_IBM_GET_SYSTEM_PARAMETER))
+		return -ENODEV;
+
+	return misc_register(&papr_sysparm_dev);
+}
+machine_device_initcall(pseries, papr_sysparm_init);
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/papr-vpd.c linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/papr-vpd.c
new file mode 100644
index 000000000000..c29e85db5f35
--- /dev/null
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/papr-vpd.c
@@ -0,0 +1,541 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#define pr_fmt(fmt) "papr-vpd: " fmt
+
+#include <linux/anon_inodes.h>
+#include <linux/build_bug.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/lockdep.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/string_helpers.h>
+#include <linux/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/papr-vpd.h>
+#include <asm/rtas-work-area.h>
+#include <asm/rtas.h>
+#include <uapi/asm/papr-vpd.h>
+
+/*
+ * Function-specific return values for ibm,get-vpd, derived from PAPR+
+ * v2.13 7.3.20 "ibm,get-vpd RTAS Call".
+ */
+#define RTAS_IBM_GET_VPD_COMPLETE    0 /* All VPD has been retrieved. */
+#define RTAS_IBM_GET_VPD_MORE_DATA   1 /* More VPD is available. */
+#define RTAS_IBM_GET_VPD_START_OVER -4 /* VPD changed, restart call sequence. */
+
+/**
+ * struct rtas_ibm_get_vpd_params - Parameters (in and out) for ibm,get-vpd.
+ * @loc_code:  In: Caller-provided location code buffer. Must be RTAS-addressable.
+ * @work_area: In: Caller-provided work area buffer for results.
+ * @sequence:  In: Sequence number. Out: Next sequence number.
+ * @written:   Out: Bytes written by ibm,get-vpd to @work_area.
+ * @status:    Out: RTAS call status.
+ */
+struct rtas_ibm_get_vpd_params {
+	const struct papr_location_code *loc_code;
+	struct rtas_work_area *work_area;
+	u32 sequence;
+	u32 written;
+	s32 status;
+};
+
+/**
+ * rtas_ibm_get_vpd() - Call ibm,get-vpd to fill a work area buffer.
+ * @params: See &struct rtas_ibm_get_vpd_params.
+ *
+ * Calls ibm,get-vpd until it errors or successfully deposits data
+ * into the supplied work area. Handles RTAS retry statuses. Maps RTAS
+ * error statuses to reasonable errno values.
+ *
+ * The caller is expected to invoke rtas_ibm_get_vpd() multiple times
+ * to retrieve all the VPD for the provided location code. Only one
+ * sequence should be in progress at any time; starting a new sequence
+ * will disrupt any sequence already in progress. Serialization of VPD
+ * retrieval sequences is the responsibility of the caller.
+ *
+ * The caller should inspect @params.status to determine whether more
+ * calls are needed to complete the sequence.
+ *
+ * Context: May sleep.
+ * Return: -ve on error, 0 otherwise.
+ */
+static int rtas_ibm_get_vpd(struct rtas_ibm_get_vpd_params *params)
+{
+	const struct papr_location_code *loc_code = params->loc_code;
+	struct rtas_work_area *work_area = params->work_area;
+	u32 rets[2];
+	s32 fwrc;
+	int ret;
+
+	lockdep_assert_held(&rtas_ibm_get_vpd_lock);
+
+	do {
+		fwrc = rtas_call(rtas_function_token(RTAS_FN_IBM_GET_VPD), 4, 3,
+				 rets,
+				 __pa(loc_code),
+				 rtas_work_area_phys(work_area),
+				 rtas_work_area_size(work_area),
+				 params->sequence);
+	} while (rtas_busy_delay(fwrc));
+
+	switch (fwrc) {
+	case RTAS_HARDWARE_ERROR:
+		ret = -EIO;
+		break;
+	case RTAS_INVALID_PARAMETER:
+		ret = -EINVAL;
+		break;
+	case RTAS_IBM_GET_VPD_START_OVER:
+		ret = -EAGAIN;
+		break;
+	case RTAS_IBM_GET_VPD_MORE_DATA:
+		params->sequence = rets[0];
+		fallthrough;
+	case RTAS_IBM_GET_VPD_COMPLETE:
+		params->written = rets[1];
+		/*
+		 * Kernel or firmware bug, do not continue.
+		 */
+		if (WARN(params->written > rtas_work_area_size(work_area),
+			 "possible write beyond end of work area"))
+			ret = -EFAULT;
+		else
+			ret = 0;
+		break;
+	default:
+		ret = -EIO;
+		pr_err_ratelimited("unexpected ibm,get-vpd status %d\n", fwrc);
+		break;
+	}
+
+	params->status = fwrc;
+	return ret;
+}
+
+/*
+ * Internal VPD "blob" APIs for accumulating ibm,get-vpd results into
+ * an immutable buffer to be attached to a file descriptor.
+ */
+struct vpd_blob {
+	const char *data;
+	size_t len;
+};
+
+static bool vpd_blob_has_data(const struct vpd_blob *blob)
+{
+	return blob->data && blob->len;
+}
+
+static void vpd_blob_free(const struct vpd_blob *blob)
+{
+	if (blob) {
+		kvfree(blob->data);
+		kfree(blob);
+	}
+}
+
+/**
+ * vpd_blob_extend() - Append data to a &struct vpd_blob.
+ * @blob: The blob to extend.
+ * @data: The new data to append to @blob.
+ * @len:  The length of @data.
+ *
+ * Context: May sleep.
+ * Return: -ENOMEM on allocation failure, 0 otherwise.
+ */
+static int vpd_blob_extend(struct vpd_blob *blob, const char *data, size_t len)
+{
+	const size_t new_len = blob->len + len;
+	const size_t old_len = blob->len;
+	const char *old_ptr = blob->data;
+	char *new_ptr;
+
+	new_ptr = old_ptr ?
+		kvrealloc(old_ptr, old_len, new_len, GFP_KERNEL_ACCOUNT) :
+		kvmalloc(len, GFP_KERNEL_ACCOUNT);
+
+	if (!new_ptr)
+		return -ENOMEM;
+
+	memcpy(&new_ptr[old_len], data, len);
+	blob->data = new_ptr;
+	blob->len = new_len;
+	return 0;
+}
+
+/**
+ * vpd_blob_generate() - Construct a new &struct vpd_blob.
+ * @generator: Function that supplies the blob data.
+ * @arg:       Context pointer supplied by caller, passed to @generator.
+ *
+ * The @generator callback is invoked until it returns NULL. @arg is
+ * passed to @generator in its first argument on each call. When
+ * @generator returns data, it should store the data length in its
+ * second argument.
+ *
+ * Context: May sleep.
+ * Return: A completely populated &struct vpd_blob, or NULL on error.
+ */
+static const struct vpd_blob *
+vpd_blob_generate(const char * (*generator)(void *, size_t *), void *arg)
+{
+	struct vpd_blob *blob;
+	const char *buf;
+	size_t len;
+	int err = 0;
+
+	blob  = kzalloc(sizeof(*blob), GFP_KERNEL_ACCOUNT);
+	if (!blob)
+		return NULL;
+
+	while (err == 0 && (buf = generator(arg, &len)))
+		err = vpd_blob_extend(blob, buf, len);
+
+	if (err != 0 || !vpd_blob_has_data(blob))
+		goto free_blob;
+
+	return blob;
+free_blob:
+	vpd_blob_free(blob);
+	return NULL;
+}
+
+/*
+ * Internal VPD sequence APIs. A VPD sequence is a series of calls to
+ * ibm,get-vpd for a given location code. The sequence ends when an
+ * error is encountered or all VPD for the location code has been
+ * returned.
+ */
+
+/**
+ * struct vpd_sequence - State for managing a VPD sequence.
+ * @error:  Shall be zero as long as the sequence has not encountered an error,
+ *          -ve errno otherwise. Use vpd_sequence_set_err() to update this.
+ * @params: Parameter block to pass to rtas_ibm_get_vpd().
+ */
+struct vpd_sequence {
+	int error;
+	struct rtas_ibm_get_vpd_params params;
+};
+
+/**
+ * vpd_sequence_begin() - Begin a VPD retrieval sequence.
+ * @seq:      Uninitialized sequence state.
+ * @loc_code: Location code that defines the scope of the VPD to return.
+ *
+ * Initializes @seq with the resources necessary to carry out a VPD
+ * sequence. Callers must pass @seq to vpd_sequence_end() regardless
+ * of whether the sequence succeeds.
+ *
+ * Context: May sleep.
+ */
+static void vpd_sequence_begin(struct vpd_sequence *seq,
+			       const struct papr_location_code *loc_code)
+{
+	/*
+	 * Use a static data structure for the location code passed to
+	 * RTAS to ensure it's in the RMA and avoid a separate work
+	 * area allocation. Guarded by the function lock.
+	 */
+	static struct papr_location_code static_loc_code;
+
+	/*
+	 * We could allocate the work area before acquiring the
+	 * function lock, but that would allow concurrent requests to
+	 * exhaust the limited work area pool for no benefit. So
+	 * allocate the work area under the lock.
+	 */
+	mutex_lock(&rtas_ibm_get_vpd_lock);
+	static_loc_code = *loc_code;
+	*seq = (struct vpd_sequence) {
+		.params = {
+			.work_area = rtas_work_area_alloc(SZ_4K),
+			.loc_code = &static_loc_code,
+			.sequence = 1,
+		},
+	};
+}
+
+/**
+ * vpd_sequence_end() - Finalize a VPD retrieval sequence.
+ * @seq: Sequence state.
+ *
+ * Releases resources obtained by vpd_sequence_begin().
+ */
+static void vpd_sequence_end(struct vpd_sequence *seq)
+{
+	rtas_work_area_free(seq->params.work_area);
+	mutex_unlock(&rtas_ibm_get_vpd_lock);
+}
+
+/**
+ * vpd_sequence_should_stop() - Determine whether a VPD retrieval sequence
+ *                              should continue.
+ * @seq: VPD sequence state.
+ *
+ * Examines the sequence error state and outputs of the last call to
+ * ibm,get-vpd to determine whether the sequence in progress should
+ * continue or stop.
+ *
+ * Return: True if the sequence has encountered an error or if all VPD for
+ *         this sequence has been retrieved. False otherwise.
+ */
+static bool vpd_sequence_should_stop(const struct vpd_sequence *seq)
+{
+	bool done;
+
+	if (seq->error)
+		return true;
+
+	switch (seq->params.status) {
+	case 0:
+		if (seq->params.written == 0)
+			done = false; /* Initial state. */
+		else
+			done = true; /* All data consumed. */
+		break;
+	case 1:
+		done = false; /* More data available. */
+		break;
+	default:
+		done = true; /* Error encountered. */
+		break;
+	}
+
+	return done;
+}
+
+static int vpd_sequence_set_err(struct vpd_sequence *seq, int err)
+{
+	/* Preserve the first error recorded. */
+	if (seq->error == 0)
+		seq->error = err;
+
+	return seq->error;
+}
+
+/*
+ * Generator function to be passed to vpd_blob_generate().
+ */
+static const char *vpd_sequence_fill_work_area(void *arg, size_t *len)
+{
+	struct vpd_sequence *seq = arg;
+	struct rtas_ibm_get_vpd_params *p = &seq->params;
+
+	if (vpd_sequence_should_stop(seq))
+		return NULL;
+	if (vpd_sequence_set_err(seq, rtas_ibm_get_vpd(p)))
+		return NULL;
+	*len = p->written;
+	return rtas_work_area_raw_buf(p->work_area);
+}
+
+/*
+ * Higher-level VPD retrieval code below. These functions use the
+ * vpd_blob_* and vpd_sequence_* APIs defined above to create fd-based
+ * VPD handles for consumption by user space.
+ */
+
+/**
+ * papr_vpd_run_sequence() - Run a single VPD retrieval sequence.
+ * @loc_code: Location code that defines the scope of VPD to return.
+ *
+ * Context: May sleep. Holds a mutex and an RTAS work area for its
+ *          duration. Typically performs multiple sleepable slab
+ *          allocations.
+ *
+ * Return: A populated &struct vpd_blob on success. Encoded error
+ * pointer otherwise.
+ */
+static const struct vpd_blob *papr_vpd_run_sequence(const struct papr_location_code *loc_code)
+{
+	const struct vpd_blob *blob;
+	struct vpd_sequence seq;
+
+	vpd_sequence_begin(&seq, loc_code);
+	blob = vpd_blob_generate(vpd_sequence_fill_work_area, &seq);
+	if (!blob)
+		vpd_sequence_set_err(&seq, -ENOMEM);
+	vpd_sequence_end(&seq);
+
+	if (seq.error) {
+		vpd_blob_free(blob);
+		return ERR_PTR(seq.error);
+	}
+
+	return blob;
+}
+
+/**
+ * papr_vpd_retrieve() - Return the VPD for a location code.
+ * @loc_code: Location code that defines the scope of VPD to return.
+ *
+ * Run VPD sequences against @loc_code until a blob is successfully
+ * instantiated, or a hard error is encountered, or a fatal signal is
+ * pending.
+ *
+ * Context: May sleep.
+ * Return: A fully populated VPD blob when successful. Encoded error
+ * pointer otherwise.
+ */
+static const struct vpd_blob *papr_vpd_retrieve(const struct papr_location_code *loc_code)
+{
+	const struct vpd_blob *blob;
+
+	/*
+	 * EAGAIN means the sequence errored with a -4 (VPD changed)
+	 * status from ibm,get-vpd, and we should attempt a new
+	 * sequence. PAPR+ v2.13 R1–7.3.20–5 indicates that this
+	 * should be a transient condition, not something that happens
+	 * continuously. But we'll stop trying on a fatal signal.
+	 */
+	do {
+		blob = papr_vpd_run_sequence(loc_code);
+		if (!IS_ERR(blob)) /* Success. */
+			break;
+		if (PTR_ERR(blob) != -EAGAIN) /* Hard error. */
+			break;
+		pr_info_ratelimited("VPD changed during retrieval, retrying\n");
+		cond_resched();
+	} while (!fatal_signal_pending(current));
+
+	return blob;
+}
+
+static ssize_t papr_vpd_handle_read(struct file *file, char __user *buf, size_t size, loff_t *off)
+{
+	const struct vpd_blob *blob = file->private_data;
+
+	/* bug: we should not instantiate a handle without any data attached. */
+	if (!vpd_blob_has_data(blob)) {
+		pr_err_once("handle without data\n");
+		return -EIO;
+	}
+
+	return simple_read_from_buffer(buf, size, off, blob->data, blob->len);
+}
+
+static int papr_vpd_handle_release(struct inode *inode, struct file *file)
+{
+	const struct vpd_blob *blob = file->private_data;
+
+	vpd_blob_free(blob);
+
+	return 0;
+}
+
+static loff_t papr_vpd_handle_seek(struct file *file, loff_t off, int whence)
+{
+	const struct vpd_blob *blob = file->private_data;
+
+	return fixed_size_llseek(file, off, whence, blob->len);
+}
+
+
+static const struct file_operations papr_vpd_handle_ops = {
+	.read = papr_vpd_handle_read,
+	.llseek = papr_vpd_handle_seek,
+	.release = papr_vpd_handle_release,
+};
+
+/**
+ * papr_vpd_create_handle() - Create a fd-based handle for reading VPD.
+ * @ulc: Location code in user memory; defines the scope of the VPD to
+ *       retrieve.
+ *
+ * Handler for PAPR_VPD_IOC_CREATE_HANDLE ioctl command. Validates
+ * @ulc and instantiates an immutable VPD "blob" for it. The blob is
+ * attached to a file descriptor for reading by user space. The memory
+ * backing the blob is freed when the file is released.
+ *
+ * The entire requested VPD is retrieved by this call and all
+ * necessary RTAS interactions are performed before returning the fd
+ * to user space. This keeps the read handler simple and ensures that
+ * the kernel can prevent interleaving of ibm,get-vpd call sequences.
+ *
+ * Return: The installed fd number if successful, -ve errno otherwise.
+ */
+static long papr_vpd_create_handle(struct papr_location_code __user *ulc)
+{
+	struct papr_location_code klc;
+	const struct vpd_blob *blob;
+	struct file *file;
+	long err;
+	int fd;
+
+	if (copy_from_user(&klc, ulc, sizeof(klc)))
+		return -EFAULT;
+
+	if (!string_is_terminated(klc.str, ARRAY_SIZE(klc.str)))
+		return -EINVAL;
+
+	blob = papr_vpd_retrieve(&klc);
+	if (IS_ERR(blob))
+		return PTR_ERR(blob);
+
+	fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
+	if (fd < 0) {
+		err = fd;
+		goto free_blob;
+	}
+
+	file = anon_inode_getfile("[papr-vpd]", &papr_vpd_handle_ops,
+				  (void *)blob, O_RDONLY);
+	if (IS_ERR(file)) {
+		err = PTR_ERR(file);
+		goto put_fd;
+	}
+
+	file->f_mode |= FMODE_LSEEK | FMODE_PREAD;
+	fd_install(fd, file);
+	return fd;
+put_fd:
+	put_unused_fd(fd);
+free_blob:
+	vpd_blob_free(blob);
+	return err;
+}
+
+/*
+ * Top-level ioctl handler for /dev/papr-vpd.
+ */
+static long papr_vpd_dev_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg)
+{
+	void __user *argp = (__force void __user *)arg;
+	long ret;
+
+	switch (ioctl) {
+	case PAPR_VPD_IOC_CREATE_HANDLE:
+		ret = papr_vpd_create_handle(argp);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+	return ret;
+}
+
+static const struct file_operations papr_vpd_ops = {
+	.unlocked_ioctl = papr_vpd_dev_ioctl,
+};
+
+static struct miscdevice papr_vpd_dev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "papr-vpd",
+	.fops = &papr_vpd_ops,
+};
+
+static __init int papr_vpd_init(void)
+{
+	if (!rtas_function_implemented(RTAS_FN_IBM_GET_VPD))
+		return -ENODEV;
+
+	return misc_register(&papr_vpd_dev);
+}
+machine_device_initcall(pseries, papr_vpd_init);
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/pci_dlpar.c linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/pci_dlpar.c
index 4ba824568119..4448386268d9 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -35,6 +35,8 @@ struct pci_controller *init_phb_dynamic(struct device_node *dn)
 
 	pseries_msi_allocate_domains(phb);
 
+	ppc_iommu_register_device(phb);
+
 	/* Create EEH devices for the PHB */
 	eeh_phb_pe_create(phb);
 
@@ -76,6 +78,8 @@ int remove_phb_dynamic(struct pci_controller *phb)
 		}
 	}
 
+	ppc_iommu_unregister_device(phb);
+
 	pseries_msi_free_domains(phb);
 
 	/* Keep a reference so phb isn't freed yet */
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/pseries.h linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/pseries.h
index 8376f03f932a..bba4ad192b0f 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/pseries.h
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/pseries.h
@@ -55,6 +55,7 @@ extern int dlpar_detach_node(struct device_node *);
 extern int dlpar_acquire_drc(u32 drc_index);
 extern int dlpar_release_drc(u32 drc_index);
 extern int dlpar_unisolate_drc(u32 drc_index);
+extern void post_mobility_fixup(void);
 
 void queue_hotplug_event(struct pseries_hp_errorlog *hp_errlog);
 int handle_dlpar_errorlog(struct pseries_hp_errorlog *hp_errlog);
diff --git linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/suspend.c linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/suspend.c
index 5c43435472cc..382003dfdb9a 100644
--- linux-libre-6.7-gnu/arch/powerpc/platforms/pseries/suspend.c
+++ linux-libre-6.8-gnu/arch/powerpc/platforms/pseries/suspend.c
@@ -13,6 +13,7 @@
 #include <asm/mmu.h>
 #include <asm/rtas.h>
 #include <asm/topology.h>
+#include "pseries.h"
 
 static struct device suspend_dev;
 
diff --git linux-libre-6.7-gnu/arch/powerpc/sysdev/fsl_pci.c linux-libre-6.8-gnu/arch/powerpc/sysdev/fsl_pci.c
index 3868483fbe29..ef7707ea0db7 100644
--- linux-libre-6.7-gnu/arch/powerpc/sysdev/fsl_pci.c
+++ linux-libre-6.8-gnu/arch/powerpc/sysdev/fsl_pci.c
@@ -54,7 +54,7 @@ static void quirk_fsl_pcie_early(struct pci_dev *dev)
 
 	/* if we aren't in host mode don't bother */
 	pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
-	if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
+	if ((hdr_type & PCI_HEADER_TYPE_MASK) != PCI_HEADER_TYPE_BRIDGE)
 		return;
 
 	dev->class = PCI_CLASS_BRIDGE_PCI_NORMAL;
@@ -581,7 +581,7 @@ static int fsl_add_bridge(struct platform_device *pdev, int is_primary)
 		hose->ops = &fsl_indirect_pcie_ops;
 		/* For PCIE read HEADER_TYPE to identify controller mode */
 		early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type);
-		if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
+		if ((hdr_type & PCI_HEADER_TYPE_MASK) != PCI_HEADER_TYPE_BRIDGE)
 			goto no_bridge;
 
 	} else {
diff --git linux-libre-6.7-gnu/arch/powerpc/sysdev/grackle.c linux-libre-6.8-gnu/arch/powerpc/sysdev/grackle.c
index fd2f94a884f0..7dce8278b71e 100644
--- linux-libre-6.7-gnu/arch/powerpc/sysdev/grackle.c
+++ linux-libre-6.8-gnu/arch/powerpc/sysdev/grackle.c
@@ -18,24 +18,8 @@
 #define GRACKLE_CFA(b, d, o)	(0x80 | ((b) << 8) | ((d) << 16) \
 				 | (((o) & ~3) << 24))
 
-#define GRACKLE_PICR1_STG		0x00000040
 #define GRACKLE_PICR1_LOOPSNOOP		0x00000010
 
-/* N.B. this is called before bridges is initialized, so we can't
-   use grackle_pcibios_{read,write}_config_dword. */
-static inline void grackle_set_stg(struct pci_controller* bp, int enable)
-{
-	unsigned int val;
-
-	out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
-	val = in_le32(bp->cfg_data);
-	val = enable? (val | GRACKLE_PICR1_STG) :
-		(val & ~GRACKLE_PICR1_STG);
-	out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
-	out_le32(bp->cfg_data, val);
-	(void)in_le32(bp->cfg_data);
-}
-
 static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)
 {
 	unsigned int val;
@@ -56,7 +40,4 @@ void __init setup_grackle(struct pci_controller *hose)
 		pci_add_flags(PCI_REASSIGN_ALL_BUS);
 	if (of_machine_is_compatible("AAPL,PowerBook1998"))
 		grackle_set_loop_snoop(hose, 1);
-#if 0	/* Disabled for now, HW problems ??? */
-	grackle_set_stg(hose, 1);
-#endif
 }
diff --git linux-libre-6.7-gnu/arch/powerpc/sysdev/udbg_memcons.c linux-libre-6.8-gnu/arch/powerpc/sysdev/udbg_memcons.c
index 5020044400dc..4de57ba52236 100644
--- linux-libre-6.7-gnu/arch/powerpc/sysdev/udbg_memcons.c
+++ linux-libre-6.8-gnu/arch/powerpc/sysdev/udbg_memcons.c
@@ -41,7 +41,7 @@ struct memcons memcons = {
 	.input_end = &memcons_input[CONFIG_PPC_MEMCONS_INPUT_SIZE],
 };
 
-void memcons_putc(char c)
+static void memcons_putc(char c)
 {
 	char *new_output_pos;
 
@@ -54,7 +54,7 @@ void memcons_putc(char c)
 	memcons.output_pos = new_output_pos;
 }
 
-int memcons_getc_poll(void)
+static int memcons_getc_poll(void)
 {
 	char c;
 	char *new_input_pos;
@@ -77,7 +77,7 @@ int memcons_getc_poll(void)
 	return -1;
 }
 
-int memcons_getc(void)
+static int memcons_getc(void)
 {
 	int c;
 
diff --git linux-libre-6.7-gnu/arch/powerpc/sysdev/xics/icp-native.c linux-libre-6.8-gnu/arch/powerpc/sysdev/xics/icp-native.c
index f6ec6dba92dc..700b67476a7d 100644
--- linux-libre-6.7-gnu/arch/powerpc/sysdev/xics/icp-native.c
+++ linux-libre-6.8-gnu/arch/powerpc/sysdev/xics/icp-native.c
@@ -236,6 +236,8 @@ static int __init icp_native_map_one_cpu(int hw_id, unsigned long addr,
 	rname = kasprintf(GFP_KERNEL, "CPU %d [0x%x] Interrupt Presentation",
 			  cpu, hw_id);
 
+	if (!rname)
+		return -ENOMEM;
 	if (!request_mem_region(addr, size, rname)) {
 		pr_warn("icp_native: Could not reserve ICP MMIO for CPU %d, interrupt server #0x%x\n",
 			cpu, hw_id);
diff --git linux-libre-6.7-gnu/arch/riscv/Kconfig linux-libre-6.8-gnu/arch/riscv/Kconfig
index cd4c9a204d08..e3142ce531a0 100644
--- linux-libre-6.7-gnu/arch/riscv/Kconfig
+++ linux-libre-6.8-gnu/arch/riscv/Kconfig
@@ -53,24 +53,28 @@ config RISCV
 	select ARCH_USE_MEMTEST
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USES_CFI_TRAPS if CFI_CLANG
+	select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH if SMP && MMU
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_GENERAL_HUGETLB if !RISCV_ISA_SVNAPOT
 	select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
 	select ARCH_WANT_LD_ORPHAN_WARN if !XIP_KERNEL
 	select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
+	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANTS_THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select BINFMT_FLAT_NO_DATA_START_OFFSET if !MMU
 	select BUILDTIME_TABLE_SORT if MMU
 	select CLINT_TIMER if !MMU
 	select CLONE_BACKWARDS
 	select COMMON_CLK
-	select CPU_PM if CPU_IDLE || HIBERNATION
+	select CPU_PM if CPU_IDLE || HIBERNATION || SUSPEND
 	select EDAC_SUPPORT
 	select FRAME_POINTER if PERF_EVENTS || (FUNCTION_TRACER && !DYNAMIC_FTRACE)
+	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY if DYNAMIC_FTRACE
 	select GENERIC_ARCH_TOPOLOGY
 	select GENERIC_ATOMIC64 if !64BIT
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_CPU_DEVICES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_ENTRY
 	select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
@@ -113,6 +117,7 @@ config RISCV
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && MMU && (CLANG_SUPPORTS_DYNAMIC_FTRACE || GCC_SUPPORTS_DYNAMIC_FTRACE)
+	select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
 	select HAVE_FUNCTION_GRAPH_TRACER
@@ -140,6 +145,8 @@ config RISCV
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RETHOOK if !XIP_KERNEL
 	select HAVE_RSEQ
+	select HAVE_SAMPLE_FTRACE_DIRECT
+	select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
@@ -181,6 +188,20 @@ config HAVE_SHADOW_CALL_STACK
 	# https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/a484e843e6eeb51f0cb7b8819e50da6d2444d769
 	depends on $(ld-option,--no-relax-gp)
 
+config RISCV_USE_LINKER_RELAXATION
+	def_bool y
+	# https://github.com/llvm/llvm-project/commit/6611d58f5bbcbec77262d392e2923e1d680f6985
+	depends on !LD_IS_LLD || LLD_VERSION >= 150000
+
+# https://github.com/llvm/llvm-project/commit/bbc0f99f3bc96f1db16f649fc21dd18e5b0918f6
+config ARCH_HAS_BROKEN_DWARF5
+	def_bool y
+	depends on RISCV_USE_LINKER_RELAXATION
+	# https://github.com/llvm/llvm-project/commit/1df5ea29b43690b6622db2cad7b745607ca4de6a
+	depends on AS_IS_LLVM && AS_VERSION < 180000
+	# https://github.com/llvm/llvm-project/commit/7ffabb61a5569444b5ac9322e22e5471cc5e4a77
+	depends on LD_IS_LLD && LLD_VERSION < 180000
+
 config ARCH_MMAP_RND_BITS_MIN
 	default 18 if 64BIT
 	default 8
@@ -294,7 +315,6 @@ config AS_HAS_OPTION_ARCH
 	# https://reviews.llvm.org/D123515
 	def_bool y
 	depends on $(as-instr, .option arch$(comma) +m)
-	depends on !$(as-instr, .option arch$(comma) -i)
 
 source "arch/riscv/Kconfig.socs"
 source "arch/riscv/Kconfig.errata"
@@ -414,7 +434,9 @@ config NUMA
 	depends on SMP && MMU
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select GENERIC_ARCH_NUMA
+	select HAVE_SETUP_PER_CPU_AREA
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK
+	select NEED_PER_CPU_PAGE_FIRST_CHUNK
 	select OF_NUMA
 	select USE_PERCPU_NUMA_NODE_ID
 	help
@@ -525,6 +547,28 @@ config RISCV_ISA_V_DEFAULT_ENABLE
 
 	  If you don't know what to do here, say Y.
 
+config RISCV_ISA_V_UCOPY_THRESHOLD
+	int "Threshold size for vectorized user copies"
+	depends on RISCV_ISA_V
+	default 768
+	help
+	  Prefer using vectorized copy_to_user()/copy_from_user() when the
+	  workload size exceeds this value.
+
+config RISCV_ISA_V_PREEMPTIVE
+	bool "Run kernel-mode Vector with kernel preemption"
+	depends on PREEMPTION
+	depends on RISCV_ISA_V
+	default y
+	help
+	  Usually, in-kernel SIMD routines are run with preemption disabled.
+	  Functions which envoke long running SIMD thus must yield core's
+	  vector unit to prevent blocking other tasks for too long.
+
+	  This config allows kernel to run SIMD without explicitly disable
+	  preemption. Enabling this config will result in higher memory
+	  consumption due to the allocation of per-task's kernel Vector context.
+
 config TOOLCHAIN_HAS_ZBB
 	bool
 	default y
@@ -651,6 +695,20 @@ config RISCV_MISALIGNED
 	  load/store for both kernel and userspace. When disable, misaligned
 	  accesses will generate SIGBUS in userspace and panic in kernel.
 
+config RISCV_EFFICIENT_UNALIGNED_ACCESS
+	bool "Assume the CPU supports fast unaligned memory accesses"
+	depends on NONPORTABLE
+	select DCACHE_WORD_ACCESS if MMU
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
+	help
+	  Say Y here if you want the kernel to assume that the CPU supports
+	  efficient unaligned memory accesses.  When enabled, this option
+	  improves the performance of the kernel on such CPUs.  However, the
+	  kernel will run much more slowly, or will not be able to run at all,
+	  on CPUs that do not support efficient unaligned memory accesses.
+
+	  If unsure what to do here, say N.
+
 endmenu # "Platform type"
 
 menu "Kernel features"
@@ -722,6 +780,25 @@ config COMPAT
 
 	  If you want to execute 32-bit userspace applications, say Y.
 
+config PARAVIRT
+	bool "Enable paravirtualization code"
+	depends on RISCV_SBI
+	help
+	  This changes the kernel so it can modify itself when it is run
+	  under a hypervisor, potentially improving performance significantly
+	  over full virtualization.
+
+config PARAVIRT_TIME_ACCOUNTING
+	bool "Paravirtual steal time accounting"
+	depends on PARAVIRT
+	help
+	  Select this option to enable fine granularity task steal time
+	  accounting. Time spent executing other tasks in parallel with
+	  the current vCPU is discounted from the vCPU power. To account for
+	  that, there can be a small performance impact.
+
+	  If in doubt, say N here.
+
 config RELOCATABLE
 	bool "Build a relocatable kernel"
 	depends on MMU && 64BIT && !XIP_KERNEL
@@ -902,13 +979,13 @@ config RISCV_ISA_FALLBACK
 	  on the replacement properties, "riscv,isa-base" and
 	  "riscv,isa-extensions".
 
-endmenu # "Boot options"
-
 config BUILTIN_DTB
-	bool
+	bool "Built-in device tree"
 	depends on OF && NONPORTABLE
 	default y if XIP_KERNEL
 
+endmenu # "Boot options"
+
 config PORTABLE
 	bool
 	default !NONPORTABLE
diff --git linux-libre-6.7-gnu/arch/riscv/Kconfig.errata linux-libre-6.8-gnu/arch/riscv/Kconfig.errata
index e2c731cfed8c..910ba8837add 100644
--- linux-libre-6.7-gnu/arch/riscv/Kconfig.errata
+++ linux-libre-6.8-gnu/arch/riscv/Kconfig.errata
@@ -53,6 +53,25 @@ config ERRATA_SIFIVE_CIP_1200
 
 	  If you don't know what to do here, say "Y".
 
+config ERRATA_STARFIVE_JH7100
+	bool "StarFive JH7100 support"
+	depends on ARCH_STARFIVE
+	depends on !DMA_DIRECT_REMAP
+	depends on NONPORTABLE
+	select DMA_GLOBAL_POOL
+	select RISCV_DMA_NONCOHERENT
+	select RISCV_NONSTANDARD_CACHE_OPS
+	select SIFIVE_CCACHE
+	default n
+	help
+	  The StarFive JH7100 was a test chip for the JH7110 and has
+	  caches that are non-coherent with respect to peripheral DMAs.
+	  It was designed before the Zicbom extension so needs non-standard
+	  cache operations through the SiFive cache controller.
+
+	  Say "Y" if you want to support the BeagleV Starlight and/or
+	  StarFive VisionFive V1 boards.
+
 config ERRATA_THEAD
 	bool "T-HEAD errata"
 	depends on RISCV_ALTERNATIVE
@@ -79,6 +98,7 @@ config ERRATA_THEAD_CMO
 	depends on ERRATA_THEAD && MMU
 	select DMA_DIRECT_REMAP
 	select RISCV_DMA_NONCOHERENT
+	select RISCV_NONSTANDARD_CACHE_OPS
 	default y
 	help
 	  This will apply the cache management errata to handle the
diff --git linux-libre-6.7-gnu/arch/riscv/Makefile linux-libre-6.8-gnu/arch/riscv/Makefile
index a74be78678eb..0b7d109258e7 100644
--- linux-libre-6.7-gnu/arch/riscv/Makefile
+++ linux-libre-6.8-gnu/arch/riscv/Makefile
@@ -43,8 +43,7 @@ else
 	KBUILD_LDFLAGS += -melf32lriscv
 endif
 
-ifeq ($(CONFIG_LD_IS_LLD),y)
-ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 150000),y)
+ifndef CONFIG_RISCV_USE_LINKER_RELAXATION
 	KBUILD_CFLAGS += -mno-relax
 	KBUILD_AFLAGS += -mno-relax
 ifndef CONFIG_AS_IS_LLVM
@@ -52,7 +51,6 @@ ifndef CONFIG_AS_IS_LLVM
 	KBUILD_AFLAGS += -Wa,-mno-relax
 endif
 endif
-endif
 
 ifeq ($(CONFIG_SHADOW_CALL_STACK),y)
 	KBUILD_LDFLAGS += --no-relax-gp
@@ -108,7 +106,9 @@ KBUILD_AFLAGS_MODULE += $(call as-option,-Wa$(comma)-mno-relax)
 # unaligned accesses.  While unaligned accesses are explicitly allowed in the
 # RISC-V ISA, they're emulated by machine mode traps on all extant
 # architectures.  It's faster to have GCC emit only aligned accesses.
+ifneq ($(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS),y)
 KBUILD_CFLAGS += $(call cc-option,-mstrict-align)
+endif
 
 ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
 prepare: stack_protector_prepare
@@ -163,6 +163,8 @@ BOOT_TARGETS := Image Image.gz loader loader.bin xipImage vmlinuz.efi
 
 all:	$(notdir $(KBUILD_IMAGE))
 
+loader.bin: loader
+Image.gz loader vmlinuz.efi: Image
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 	@$(kecho) '  Kernel: $(boot)/$@ is ready'
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts linux-libre-6.8-gnu/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
index dce96f27cc89..222a39d90f85 100644
--- linux-libre-6.7-gnu/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
@@ -192,6 +192,27 @@
 	status = "okay";
 };
 
+&syscontroller_qspi {
+	/*
+	 * The flash *is* there, but Icicle kits that have engineering sample
+	 * silicon (write?) access to this flash to non-functional. The system
+	 * controller itself can actually access it, but the MSS cannot write
+	 * an image there. Instantiating a coreQSPI in the fabric & connecting
+	 * it to the flash instead should work though. Pre-production or later
+	 * silicon does not have this issue.
+	 */
+	status = "disabled";
+
+	sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
 &usb {
 	status = "okay";
 	dr_mode = "host";
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/microchip/mpfs.dtsi linux-libre-6.8-gnu/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 266489d43912..59fd2d4ea523 100644
--- linux-libre-6.7-gnu/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -194,6 +194,12 @@
 		mboxes = <&mbox 0>;
 	};
 
+	scbclk: mssclkclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <80000000>;
+	};
+
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -524,5 +530,16 @@
 			#mbox-cells = <1>;
 			status = "disabled";
 		};
+
+		syscontroller_qspi: spi@37020100 {
+			compatible = "microchip,mpfs-qspi", "microchip,coreqspi-rtl-v2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x37020100 0x0 0x100>;
+			interrupt-parent = <&plic>;
+			interrupts = <110>;
+			clocks = <&scbclk>;
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi linux-libre-6.8-gnu/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
index b0796015e36b..a92cfcfc021b 100644
--- linux-libre-6.7-gnu/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
@@ -24,6 +24,10 @@
 			reg = <0x0>;
 			status = "okay";
 			riscv,isa = "rv64imafdc";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "zicntr", "zicsr", "zifencei",
+					       "zihpm";
 			mmu-type = "riscv,sv39";
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <0x40>;
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts linux-libre-6.8-gnu/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index 07387f9c135c..72b87b08ab44 100644
--- linux-libre-6.7-gnu/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -123,6 +123,7 @@
 		interrupt-parent = <&gpio>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/sophgo/Makefile linux-libre-6.8-gnu/arch/riscv/boot/dts/sophgo/Makefile
index 3fb65512c631..57ad82a61ea6 100644
--- linux-libre-6.7-gnu/arch/riscv/boot/dts/sophgo/Makefile
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/sophgo/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_SOPHGO) += cv1800b-milkv-duo.dtb
+dtb-$(CONFIG_ARCH_SOPHGO) += cv1812h-huashan-pi.dtb
 dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-milkv-pioneer.dtb
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/sophgo/cv1800b.dtsi linux-libre-6.8-gnu/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
index aec6401a467b..165e9e320a8c 100644
--- linux-libre-6.7-gnu/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
@@ -3,120 +3,16 @@
  * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
  */
 
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "cv18xx.dtsi"
 
 / {
 	compatible = "sophgo,cv1800b";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		timebase-frequency = <25000000>;
-
-		cpu0: cpu@0 {
-			compatible = "thead,c906", "riscv";
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-block-size = <64>;
-			d-cache-sets = <512>;
-			d-cache-size = <65536>;
-			i-cache-block-size = <64>;
-			i-cache-sets = <128>;
-			i-cache-size = <32768>;
-			mmu-type = "riscv,sv39";
-			riscv,isa = "rv64imafdc";
-			riscv,isa-base = "rv64i";
-			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
-					       "zifencei", "zihpm";
-
-			cpu0_intc: interrupt-controller {
-				compatible = "riscv,cpu-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	osc: oscillator {
-		compatible = "fixed-clock";
-		clock-output-names = "osc_25m";
-		#clock-cells = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&plic>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		dma-noncoherent;
-		ranges;
-
-		uart0: serial@4140000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04140000 0x100>;
-			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart1: serial@4150000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04150000 0x100>;
-			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart2: serial@4160000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04160000 0x100>;
-			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart3: serial@4170000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04170000 0x100>;
-			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart4: serial@41c0000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x041c0000 0x100>;
-			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
+};
 
-		plic: interrupt-controller@70000000 {
-			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
-			reg = <0x70000000 0x4000000>;
-			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			riscv,ndev = <101>;
-		};
+&plic {
+	compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
+};
 
-		clint: timer@74000000 {
-			compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
-			reg = <0x74000000 0x10000>;
-			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
-		};
-	};
+&clint {
+	compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
 };
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts linux-libre-6.8-gnu/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts
new file mode 100644
index 000000000000..aa361f3a86bb
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "cv1812h.dtsi"
+
+/ {
+	model = "Huashan Pi";
+	compatible = "sophgo,huashan-pi", "sophgo,cv1812h";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		coprocessor_rtos: region@8fe00000 {
+			reg = <0x8fe00000 0x200000>;
+			no-map;
+		};
+	};
+};
+
+&osc {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/sophgo/cv1812h.dtsi linux-libre-6.8-gnu/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
new file mode 100644
index 000000000000..3e7a942f5c1a
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "cv18xx.dtsi"
+
+/ {
+	compatible = "sophgo,cv1812h";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&plic {
+	compatible = "sophgo,cv1812h-plic", "thead,c900-plic";
+};
+
+&clint {
+	compatible = "sophgo,cv1812h-clint", "thead,c900-clint";
+};
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/sophgo/cv18xx.dtsi linux-libre-6.8-gnu/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
new file mode 100644
index 000000000000..2d6f4a4b1e58
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <25000000>;
+
+		cpu0: cpu@0 {
+			compatible = "thead,c906", "riscv";
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <512>;
+			d-cache-size = <65536>;
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			mmu-type = "riscv,sv39";
+			riscv,isa = "rv64imafdc";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
+					       "zifencei", "zihpm";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	osc: oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "osc_25m";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-noncoherent;
+		ranges;
+
+		gpio0: gpio@3020000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3020000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@3021000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3021000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@3022000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3022000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio3: gpio@3023000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3023000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portd: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		uart0: serial@4140000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04140000 0x100>;
+			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@4150000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04150000 0x100>;
+			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@4160000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04160000 0x100>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@4170000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04170000 0x100>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart4: serial@41c0000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x041c0000 0x100>;
+			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		plic: interrupt-controller@70000000 {
+			reg = <0x70000000 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			riscv,ndev = <101>;
+		};
+
+		clint: timer@74000000 {
+			reg = <0x74000000 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
+		};
+	};
+};
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/sophgo/sg2042.dtsi linux-libre-6.8-gnu/arch/riscv/boot/dts/sophgo/sg2042.dtsi
index 93256540d078..ead1cc35d88b 100644
--- linux-libre-6.7-gnu/arch/riscv/boot/dts/sophgo/sg2042.dtsi
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/sophgo/sg2042.dtsi
@@ -93,144 +93,160 @@
 					      <&cpu63_intc 3>;
 		};
 
-		clint_mtimer0: timer@70ac000000 {
+		clint_mtimer0: timer@70ac004000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac000000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac004000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu0_intc 7>,
 					      <&cpu1_intc 7>,
 					      <&cpu2_intc 7>,
 					      <&cpu3_intc 7>;
 		};
 
-		clint_mtimer1: timer@70ac010000 {
+		clint_mtimer1: timer@70ac014000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac010000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac014000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu4_intc 7>,
 					      <&cpu5_intc 7>,
 					      <&cpu6_intc 7>,
 					      <&cpu7_intc 7>;
 		};
 
-		clint_mtimer2: timer@70ac020000 {
+		clint_mtimer2: timer@70ac024000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac020000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac024000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu8_intc 7>,
 					      <&cpu9_intc 7>,
 					      <&cpu10_intc 7>,
 					      <&cpu11_intc 7>;
 		};
 
-		clint_mtimer3: timer@70ac030000 {
+		clint_mtimer3: timer@70ac034000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac030000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac034000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu12_intc 7>,
 					      <&cpu13_intc 7>,
 					      <&cpu14_intc 7>,
 					      <&cpu15_intc 7>;
 		};
 
-		clint_mtimer4: timer@70ac040000 {
+		clint_mtimer4: timer@70ac044000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac040000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac044000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu16_intc 7>,
 					      <&cpu17_intc 7>,
 					      <&cpu18_intc 7>,
 					      <&cpu19_intc 7>;
 		};
 
-		clint_mtimer5: timer@70ac050000 {
+		clint_mtimer5: timer@70ac054000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac050000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac054000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu20_intc 7>,
 					      <&cpu21_intc 7>,
 					      <&cpu22_intc 7>,
 					      <&cpu23_intc 7>;
 		};
 
-		clint_mtimer6: timer@70ac060000 {
+		clint_mtimer6: timer@70ac064000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac060000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac064000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu24_intc 7>,
 					      <&cpu25_intc 7>,
 					      <&cpu26_intc 7>,
 					      <&cpu27_intc 7>;
 		};
 
-		clint_mtimer7: timer@70ac070000 {
+		clint_mtimer7: timer@70ac074000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac070000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac074000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu28_intc 7>,
 					      <&cpu29_intc 7>,
 					      <&cpu30_intc 7>,
 					      <&cpu31_intc 7>;
 		};
 
-		clint_mtimer8: timer@70ac080000 {
+		clint_mtimer8: timer@70ac084000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac080000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac084000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu32_intc 7>,
 					      <&cpu33_intc 7>,
 					      <&cpu34_intc 7>,
 					      <&cpu35_intc 7>;
 		};
 
-		clint_mtimer9: timer@70ac090000 {
+		clint_mtimer9: timer@70ac094000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac090000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac094000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu36_intc 7>,
 					      <&cpu37_intc 7>,
 					      <&cpu38_intc 7>,
 					      <&cpu39_intc 7>;
 		};
 
-		clint_mtimer10: timer@70ac0a0000 {
+		clint_mtimer10: timer@70ac0a4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0a0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0a4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu40_intc 7>,
 					      <&cpu41_intc 7>,
 					      <&cpu42_intc 7>,
 					      <&cpu43_intc 7>;
 		};
 
-		clint_mtimer11: timer@70ac0b0000 {
+		clint_mtimer11: timer@70ac0b4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0b0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0b4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu44_intc 7>,
 					      <&cpu45_intc 7>,
 					      <&cpu46_intc 7>,
 					      <&cpu47_intc 7>;
 		};
 
-		clint_mtimer12: timer@70ac0c0000 {
+		clint_mtimer12: timer@70ac0c4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0c0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0c4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu48_intc 7>,
 					      <&cpu49_intc 7>,
 					      <&cpu50_intc 7>,
 					      <&cpu51_intc 7>;
 		};
 
-		clint_mtimer13: timer@70ac0d0000 {
+		clint_mtimer13: timer@70ac0d4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0d0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0d4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu52_intc 7>,
 					      <&cpu53_intc 7>,
 					      <&cpu54_intc 7>,
 					      <&cpu55_intc 7>;
 		};
 
-		clint_mtimer14: timer@70ac0e0000 {
+		clint_mtimer14: timer@70ac0e4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0e0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0e4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu56_intc 7>,
 					      <&cpu57_intc 7>,
 					      <&cpu58_intc 7>,
 					      <&cpu59_intc 7>;
 		};
 
-		clint_mtimer15: timer@70ac0f0000 {
+		clint_mtimer15: timer@70ac0f4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0f0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0f4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu60_intc 7>,
 					      <&cpu61_intc 7>,
 					      <&cpu62_intc 7>,
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/starfive/jh7100-common.dtsi linux-libre-6.8-gnu/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
index b93ce351a90f..42fb61c36068 100644
--- linux-libre-6.7-gnu/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
@@ -12,6 +12,8 @@
 
 / {
 	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdio1;
 		serial0 = &uart3;
 	};
 
@@ -39,6 +41,35 @@
 			label = "ack";
 		};
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dma-reserved@fa000000 {
+			reg = <0x0 0xfa000000 0x0 0x1000000>;
+			no-map;
+		};
+
+		linux,dma@107a000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10 0x7a000000 0x0 0x1000000>;
+			no-map;
+			linux,dma-default;
+		};
+	};
+
+	soc {
+		dma-ranges = <0x00 0x80000000 0x00 0x80000000 0x00 0x7a000000>,
+			     <0x00 0xfa000000 0x10 0x7a000000 0x00 0x01000000>,
+			     <0x00 0xfb000000 0x00 0xfb000000 0x07 0x85000000>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &gpio {
@@ -84,6 +115,78 @@
 		};
 	};
 
+	sdio0_pins: sdio0-0 {
+		clk-pins {
+			pinmux = <GPIOMUX(54, GPO_SDIO0_PAD_CCLK_OUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+		sdio-pins {
+			pinmux = <GPIOMUX(55, GPO_LOW, GPO_DISABLE,
+				  GPI_SDIO0_PAD_CARD_DETECT_N)>,
+				 <GPIOMUX(53,
+				  GPO_SDIO0_PAD_CCMD_OUT,
+				  GPO_SDIO0_PAD_CCMD_OEN,
+				  GPI_SDIO0_PAD_CCMD_IN)>,
+				 <GPIOMUX(49,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT0,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT0,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT0)>,
+				 <GPIOMUX(50,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT1,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT1,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT1)>,
+				 <GPIOMUX(51,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT2,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT2,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT2)>,
+				 <GPIOMUX(52,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT3,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT3,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT3)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	sdio1_pins: sdio1-0 {
+		clk-pins {
+			pinmux = <GPIOMUX(33, GPO_SDIO1_PAD_CCLK_OUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+		sdio-pins {
+			pinmux = <GPIOMUX(29,
+				  GPO_SDIO1_PAD_CCMD_OUT,
+				  GPO_SDIO1_PAD_CCMD_OEN,
+				  GPI_SDIO1_PAD_CCMD_IN)>,
+				 <GPIOMUX(36,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT0,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT0,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT0)>,
+				 <GPIOMUX(30,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT1,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT1,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT1)>,
+				 <GPIOMUX(34,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT2,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT2,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT2)>,
+				 <GPIOMUX(31,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT3,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT3,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT3)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
 	uart3_pins: uart3-0 {
 		rx-pins {
 			pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
@@ -154,6 +257,34 @@
 	clock-frequency = <27000000>;
 };
 
+&sdio0 {
+	broken-cd;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_pins>;
+	status = "okay";
+};
+
+&sdio1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	cap-power-off-card;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio1_pins>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/starfive/jh7100.dtsi linux-libre-6.8-gnu/arch/riscv/boot/dts/starfive/jh7100.dtsi
index e68cafe7545f..8bcf36d07f3f 100644
--- linux-libre-6.7-gnu/arch/riscv/boot/dts/starfive/jh7100.dtsi
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -32,6 +32,7 @@
 			i-tlb-sets = <1>;
 			i-tlb-size = <32>;
 			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc";
 			riscv,isa-base = "rv64i";
 			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
@@ -60,6 +61,7 @@
 			i-tlb-sets = <1>;
 			i-tlb-size = <32>;
 			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc";
 			riscv,isa-base = "rv64i";
 			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
@@ -94,14 +96,14 @@
 			thermal-sensors = <&sfctemp>;
 
 			trips {
-				cpu_alert0 {
+				cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit {
+				cpu-crit {
 					/* milliCelsius */
 					temperature = <90000>;
 					hysteresis = <2000>;
@@ -111,28 +113,28 @@
 		};
 	};
 
-	osc_sys: osc_sys {
+	osc_sys: osc-sys {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
 	};
 
-	osc_aud: osc_aud {
+	osc_aud: osc-aud {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
 	};
 
-	gmac_rmii_ref: gmac_rmii_ref {
+	gmac_rmii_ref: gmac-rmii-ref {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* Should be overridden by the board when needed */
 		clock-frequency = <0>;
 	};
 
-	gmac_gr_mii_rxclk: gmac_gr_mii_rxclk {
+	gmac_gr_mii_rxclk: gmac-gr-mii-rxclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* Should be overridden by the board when needed */
@@ -144,26 +146,64 @@
 		interrupt-parent = <&plic>;
 		#address-cells = <2>;
 		#size-cells = <2>;
+		dma-noncoherent;
 		ranges;
 
 		clint: clint@2000000 {
 			compatible = "starfive,jh7100-clint", "sifive,clint0";
 			reg = <0x0 0x2000000 0x0 0x10000>;
-			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
-					       &cpu1_intc 3 &cpu1_intc 7>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>;
+		};
+
+		ccache: cache-controller@2010000 {
+			compatible = "starfive,jh7100-ccache", "sifive,ccache0", "cache";
+			reg = <0x0 0x2010000 0x0 0x1000>;
+			interrupts = <128>, <130>, <131>, <129>;
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <2097152>;
+			cache-unified;
 		};
 
 		plic: interrupt-controller@c000000 {
 			compatible = "starfive,jh7100-plic", "sifive,plic-1.0.0";
 			reg = <0x0 0xc000000 0x0 0x4000000>;
-			interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9
-					       &cpu1_intc 11 &cpu1_intc 9>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
 			riscv,ndev = <133>;
 		};
 
+		sdio0: mmc@10000000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x0 0x10000000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_SDIO0_AHB>,
+				 <&clkgen JH7100_CLK_SDIO0_CCLKINT_INV>;
+			clock-names = "biu", "ciu";
+			interrupts = <4>;
+			data-addr = <0>;
+			fifo-depth = <32>;
+			fifo-watermark-aligned;
+			status = "disabled";
+		};
+
+		sdio1: mmc@10010000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x0 0x10010000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_SDIO1_AHB>,
+				 <&clkgen JH7100_CLK_SDIO1_CCLKINT_INV>;
+			clock-names = "biu", "ciu";
+			interrupts = <5>;
+			data-addr = <0>;
+			fifo-depth = <32>;
+			fifo-watermark-aligned;
+			status = "disabled";
+		};
+
 		clkgen: clock-controller@11800000 {
 			compatible = "starfive,jh7100-clkgen";
 			reg = <0x0 0x11800000 0x0 0x10000>;
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/starfive/jh7110.dtsi linux-libre-6.8-gnu/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 45213cdf50dc..74ed3b9264d8 100644
--- linux-libre-6.7-gnu/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -237,14 +237,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit {
+				cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts linux-libre-6.8-gnu/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index 70e8042c8304..d9b4de9e4757 100644
--- linux-libre-6.7-gnu/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -48,6 +48,10 @@
 	clock-frequency = <62500000>;
 };
 
+&sdhci_clk {
+	clock-frequency = <198000000>;
+};
+
 &uart_sclk {
 	clock-frequency = <100000000>;
 };
@@ -56,6 +60,22 @@
 	status = "okay";
 };
 
+&emmc {
+	bus-width = <8>;
+	max-frequency = <198000000>;
+	mmc-hs400-1_8v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	max-frequency = <198000000>;
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi linux-libre-6.8-gnu/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
index a802ab110429..1365d3a512a3 100644
--- linux-libre-6.7-gnu/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -29,6 +29,10 @@
 	clock-frequency = <62500000>;
 };
 
+&sdhci_clk {
+	clock-frequency = <198000000>;
+};
+
 &uart_sclk {
 	clock-frequency = <100000000>;
 };
@@ -36,3 +40,19 @@
 &dmac0 {
 	status = "okay";
 };
+
+&emmc {
+	bus-width = <8>;
+	max-frequency = <198000000>;
+	mmc-hs400-1_8v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	max-frequency = <198000000>;
+	status = "okay";
+};
diff --git linux-libre-6.7-gnu/arch/riscv/boot/dts/thead/th1520.dtsi linux-libre-6.8-gnu/arch/riscv/boot/dts/thead/th1520.dtsi
index ba4d2c673ac8..8b915e206f3a 100644
--- linux-libre-6.7-gnu/arch/riscv/boot/dts/thead/th1520.dtsi
+++ linux-libre-6.8-gnu/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -146,6 +146,13 @@
 		#clock-cells = <0>;
 	};
 
+	sdhci_clk: sdhci-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "sdhci_clk";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&plic>;
@@ -304,6 +311,33 @@
 			status = "disabled";
 		};
 
+		emmc: mmc@ffe7080000 {
+			compatible = "thead,th1520-dwcmshc";
+			reg = <0xff 0xe7080000 0x0 0x10000>;
+			interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdhci_clk>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		sdio0: mmc@ffe7090000 {
+			compatible = "thead,th1520-dwcmshc";
+			reg = <0xff 0xe7090000 0x0 0x10000>;
+			interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdhci_clk>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		sdio1: mmc@ffe70a0000 {
+			compatible = "thead,th1520-dwcmshc";
+			reg = <0xff 0xe70a0000 0x0 0x10000>;
+			interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdhci_clk>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
 		timer0: timer@ffefc32000 {
 			compatible = "snps,dw-apb-timer";
 			reg = <0xff 0xefc32000 0x0 0x14>;
diff --git linux-libre-6.7-gnu/arch/riscv/configs/defconfig linux-libre-6.8-gnu/arch/riscv/configs/defconfig
index 905881282a7c..eaf34e871e30 100644
--- linux-libre-6.7-gnu/arch/riscv/configs/defconfig
+++ linux-libre-6.8-gnu/arch/riscv/configs/defconfig
@@ -149,6 +149,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_VIRTIO=y
diff --git linux-libre-6.7-gnu/arch/riscv/configs/rv32_defconfig linux-libre-6.8-gnu/arch/riscv/configs/rv32_defconfig
deleted file mode 100644
index 89b601e253a6..000000000000
--- linux-libre-6.7-gnu/arch/riscv/configs/rv32_defconfig
+++ /dev/null
@@ -1,139 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BPF_SYSCALL=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_CFS_BANDWIDTH=y
-CONFIG_CGROUP_BPF=y
-CONFIG_NAMESPACES=y
-CONFIG_USER_NS=y
-CONFIG_CHECKPOINT_RESTORE=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_SYSFS_SYSCALL is not set
-CONFIG_PROFILING=y
-CONFIG_SOC_SIFIVE=y
-CONFIG_SOC_VIRT=y
-CONFIG_NONPORTABLE=y
-CONFIG_ARCH_RV32I=y
-CONFIG_SMP=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=m
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NETLINK_DIAG=y
-CONFIG_NET_9P=y
-CONFIG_NET_9P_VIRTIO=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCIE_XILINX=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_VIRTIO_NET=y
-CONFIG_MACB=y
-CONFIG_E1000E=y
-CONFIG_R8169=y
-CONFIG_MICROSEMI_PHY=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_SPI=y
-CONFIG_SPI_SIFIVE=y
-# CONFIG_PTP_1588_CLOCK is not set
-CONFIG_DRM=y
-CONFIG_DRM_RADEON=y
-CONFIG_DRM_VIRTIO_GPU=y
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_UAS=y
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_RTC_CLASS=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_INPUT=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_RPMSG_CHAR=y
-CONFIG_RPMSG_CTRL=y
-CONFIG_RPMSG_VIRTIO=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_AUTOFS_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_HUGETLBFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_NFS_V4_2=y
-CONFIG_ROOT_NFS=y
-CONFIG_9P_FS=y
-CONFIG_CRYPTO_USER_API_HASH=y
-CONFIG_CRYPTO_DEV_VIRTIO=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_PAGEALLOC=y
-CONFIG_SCHED_STACK_END_CHECK=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_VM_PGFLAGS=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DEBUG_PER_CPU_MAPS=y
-CONFIG_SOFTLOCKUP_DETECTOR=y
-CONFIG_WQ_WATCHDOG=y
-CONFIG_DEBUG_TIMEKEEPING=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_RWSEMS=y
-CONFIG_DEBUG_ATOMIC_SLEEP=y
-CONFIG_STACKTRACE=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_PLIST=y
-CONFIG_DEBUG_SG=y
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_EQS_DEBUG=y
-# CONFIG_FTRACE is not set
-# CONFIG_RUNTIME_TESTING_MENU is not set
-CONFIG_MEMTEST=y
diff --git linux-libre-6.7-gnu/arch/riscv/errata/thead/errata.c linux-libre-6.8-gnu/arch/riscv/errata/thead/errata.c
index 0554ed4bf087..b1c410bbc1ae 100644
--- linux-libre-6.7-gnu/arch/riscv/errata/thead/errata.c
+++ linux-libre-6.8-gnu/arch/riscv/errata/thead/errata.c
@@ -12,8 +12,10 @@
 #include <asm/alternative.h>
 #include <asm/cacheflush.h>
 #include <asm/cpufeature.h>
+#include <asm/dma-noncoherent.h>
 #include <asm/errata_list.h>
 #include <asm/hwprobe.h>
+#include <asm/io.h>
 #include <asm/patch.h>
 #include <asm/vendorid_list.h>
 
@@ -33,6 +35,69 @@ static bool errata_probe_pbmt(unsigned int stage,
 	return false;
 }
 
+/*
+ * th.dcache.ipa rs1 (invalidate, physical address)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000001    01010      rs1       000      00000  0001011
+ * th.dcache.iva rs1 (invalidate, virtual address)
+ *   0000001    00110      rs1       000      00000  0001011
+ *
+ * th.dcache.cpa rs1 (clean, physical address)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000001    01001      rs1       000      00000  0001011
+ * th.dcache.cva rs1 (clean, virtual address)
+ *   0000001    00101      rs1       000      00000  0001011
+ *
+ * th.dcache.cipa rs1 (clean then invalidate, physical address)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000001    01011      rs1       000      00000  0001011
+ * th.dcache.civa rs1 (clean then invalidate, virtual address)
+ *   0000001    00111      rs1       000      00000  0001011
+ *
+ * th.sync.s (make sure all cache operations finished)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000000    11001     00000      000      00000  0001011
+ */
+#define THEAD_INVAL_A0	".long 0x02a5000b"
+#define THEAD_CLEAN_A0	".long 0x0295000b"
+#define THEAD_FLUSH_A0	".long 0x02b5000b"
+#define THEAD_SYNC_S	".long 0x0190000b"
+
+#define THEAD_CMO_OP(_op, _start, _size, _cachesize)			\
+asm volatile("mv a0, %1\n\t"						\
+	     "j 2f\n\t"							\
+	     "3:\n\t"							\
+	     THEAD_##_op##_A0 "\n\t"					\
+	     "add a0, a0, %0\n\t"					\
+	     "2:\n\t"							\
+	     "bltu a0, %2, 3b\n\t"					\
+	     THEAD_SYNC_S						\
+	     : : "r"(_cachesize),					\
+		 "r"((unsigned long)(_start) & ~((_cachesize) - 1UL)),	\
+		 "r"((unsigned long)(_start) + (_size))			\
+	     : "a0")
+
+static void thead_errata_cache_inv(phys_addr_t paddr, size_t size)
+{
+	THEAD_CMO_OP(INVAL, paddr, size, riscv_cbom_block_size);
+}
+
+static void thead_errata_cache_wback(phys_addr_t paddr, size_t size)
+{
+	THEAD_CMO_OP(CLEAN, paddr, size, riscv_cbom_block_size);
+}
+
+static void thead_errata_cache_wback_inv(phys_addr_t paddr, size_t size)
+{
+	THEAD_CMO_OP(FLUSH, paddr, size, riscv_cbom_block_size);
+}
+
+static const struct riscv_nonstd_cache_ops thead_errata_cmo_ops = {
+	.wback = &thead_errata_cache_wback,
+	.inv = &thead_errata_cache_inv,
+	.wback_inv = &thead_errata_cache_wback_inv,
+};
+
 static bool errata_probe_cmo(unsigned int stage,
 			     unsigned long arch_id, unsigned long impid)
 {
@@ -48,6 +113,7 @@ static bool errata_probe_cmo(unsigned int stage,
 	if (stage == RISCV_ALTERNATIVES_BOOT) {
 		riscv_cbom_block_size = L1_CACHE_BYTES;
 		riscv_noncoherent_supported();
+		riscv_noncoherent_register_cache_ops(&thead_errata_cmo_ops);
 	}
 
 	return true;
@@ -77,8 +143,7 @@ static u32 thead_errata_probe(unsigned int stage,
 	if (errata_probe_pbmt(stage, archid, impid))
 		cpu_req_errata |= BIT(ERRATA_THEAD_PBMT);
 
-	if (errata_probe_cmo(stage, archid, impid))
-		cpu_req_errata |= BIT(ERRATA_THEAD_CMO);
+	errata_probe_cmo(stage, archid, impid);
 
 	if (errata_probe_pmu(stage, archid, impid))
 		cpu_req_errata |= BIT(ERRATA_THEAD_PMU);
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/arch_hweight.h linux-libre-6.8-gnu/arch/riscv/include/asm/arch_hweight.h
new file mode 100644
index 000000000000..85b2c443823e
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/arch_hweight.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Based on arch/x86/include/asm/arch_hweight.h
+ */
+
+#ifndef _ASM_RISCV_HWEIGHT_H
+#define _ASM_RISCV_HWEIGHT_H
+
+#include <asm/alternative-macros.h>
+#include <asm/hwcap.h>
+
+#if (BITS_PER_LONG == 64)
+#define CPOPW	"cpopw "
+#elif (BITS_PER_LONG == 32)
+#define CPOPW	"cpop "
+#else
+#error "Unexpected BITS_PER_LONG"
+#endif
+
+static __always_inline unsigned int __arch_hweight32(unsigned int w)
+{
+#ifdef CONFIG_RISCV_ISA_ZBB
+	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
+				      RISCV_ISA_EXT_ZBB, 1)
+			  : : : : legacy);
+
+	asm (".option push\n"
+	     ".option arch,+zbb\n"
+	     CPOPW "%0, %0\n"
+	     ".option pop\n"
+	     : "+r" (w) : :);
+
+	return w;
+
+legacy:
+#endif
+	return __sw_hweight32(w);
+}
+
+static inline unsigned int __arch_hweight16(unsigned int w)
+{
+	return __arch_hweight32(w & 0xffff);
+}
+
+static inline unsigned int __arch_hweight8(unsigned int w)
+{
+	return __arch_hweight32(w & 0xff);
+}
+
+#if BITS_PER_LONG == 64
+static __always_inline unsigned long __arch_hweight64(__u64 w)
+{
+# ifdef CONFIG_RISCV_ISA_ZBB
+	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
+				      RISCV_ISA_EXT_ZBB, 1)
+			  : : : : legacy);
+
+	asm (".option push\n"
+	     ".option arch,+zbb\n"
+	     "cpop %0, %0\n"
+	     ".option pop\n"
+	     : "+r" (w) : :);
+
+	return w;
+
+legacy:
+# endif
+	return __sw_hweight64(w);
+}
+#else /* BITS_PER_LONG == 64 */
+static inline unsigned long __arch_hweight64(__u64 w)
+{
+	return  __arch_hweight32((u32)w) +
+		__arch_hweight32((u32)(w >> 32));
+}
+#endif /* !(BITS_PER_LONG == 64) */
+
+#endif /* _ASM_RISCV_HWEIGHT_H */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/archrandom.h linux-libre-6.8-gnu/arch/riscv/include/asm/archrandom.h
new file mode 100644
index 000000000000..5345360adfb9
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/archrandom.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Kernel interface for the RISCV arch_random_* functions
+ *
+ * Copyright (c) 2023 Rivos Inc.
+ *
+ */
+
+#ifndef ASM_RISCV_ARCHRANDOM_H
+#define ASM_RISCV_ARCHRANDOM_H
+
+#include <asm/csr.h>
+#include <asm/processor.h>
+
+#define SEED_RETRY_LOOPS 100
+
+static inline bool __must_check csr_seed_long(unsigned long *v)
+{
+	unsigned int retry = SEED_RETRY_LOOPS, valid_seeds = 0;
+	const int needed_seeds = sizeof(long) / sizeof(u16);
+	u16 *entropy = (u16 *)v;
+
+	do {
+		/*
+		 * The SEED CSR must be accessed with a read-write instruction.
+		 */
+		unsigned long csr_seed = csr_swap(CSR_SEED, 0);
+		unsigned long opst = csr_seed & SEED_OPST_MASK;
+
+		switch (opst) {
+		case SEED_OPST_ES16:
+			entropy[valid_seeds++] = csr_seed & SEED_ENTROPY_MASK;
+			if (valid_seeds == needed_seeds)
+				return true;
+			break;
+
+		case SEED_OPST_DEAD:
+			pr_err_once("archrandom: Unrecoverable error\n");
+			return false;
+
+		case SEED_OPST_BIST:
+		case SEED_OPST_WAIT:
+		default:
+			cpu_relax();
+			continue;
+		}
+	} while (--retry);
+
+	return false;
+}
+
+static inline size_t __must_check arch_get_random_longs(unsigned long *v, size_t max_longs)
+{
+	return 0;
+}
+
+static inline size_t __must_check arch_get_random_seed_longs(unsigned long *v, size_t max_longs)
+{
+	if (!max_longs)
+		return 0;
+
+	/*
+	 * If Zkr is supported and csr_seed_long succeeds, we return one long
+	 * worth of entropy.
+	 */
+	if (riscv_has_extension_likely(RISCV_ISA_EXT_ZKR) && csr_seed_long(v))
+		return 1;
+
+	return 0;
+}
+
+#endif /* ASM_RISCV_ARCHRANDOM_H */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/asm-extable.h linux-libre-6.8-gnu/arch/riscv/include/asm/asm-extable.h
index 00a96e7a9664..0c8bfd54fc4e 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/asm-extable.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/asm-extable.h
@@ -6,6 +6,7 @@
 #define EX_TYPE_FIXUP			1
 #define EX_TYPE_BPF			2
 #define EX_TYPE_UACCESS_ERR_ZERO	3
+#define EX_TYPE_LOAD_UNALIGNED_ZEROPAD	4
 
 #ifdef CONFIG_MMU
 
@@ -47,6 +48,11 @@
 #define EX_DATA_REG_ZERO_SHIFT	5
 #define EX_DATA_REG_ZERO	GENMASK(9, 5)
 
+#define EX_DATA_REG_DATA_SHIFT	0
+#define EX_DATA_REG_DATA	GENMASK(4, 0)
+#define EX_DATA_REG_ADDR_SHIFT	5
+#define EX_DATA_REG_ADDR	GENMASK(9, 5)
+
 #define EX_DATA_REG(reg, gpr)						\
 	"((.L__gpr_num_" #gpr ") << " __stringify(EX_DATA_REG_##reg##_SHIFT) ")"
 
@@ -62,6 +68,15 @@
 #define _ASM_EXTABLE_UACCESS_ERR(insn, fixup, err)			\
 	_ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, zero)
 
+#define _ASM_EXTABLE_LOAD_UNALIGNED_ZEROPAD(insn, fixup, data, addr)		\
+	__DEFINE_ASM_GPR_NUMS							\
+	__ASM_EXTABLE_RAW(#insn, #fixup,					\
+			  __stringify(EX_TYPE_LOAD_UNALIGNED_ZEROPAD),		\
+			  "("							\
+			    EX_DATA_REG(DATA, data) " | "			\
+			    EX_DATA_REG(ADDR, addr)				\
+			  ")")
+
 #endif /* __ASSEMBLY__ */
 
 #else /* CONFIG_MMU */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/asm-prototypes.h linux-libre-6.8-gnu/arch/riscv/include/asm/asm-prototypes.h
index 36b955c762ba..cd627ec289f1 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/asm-prototypes.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/asm-prototypes.h
@@ -9,6 +9,33 @@ long long __lshrti3(long long a, int b);
 long long __ashrti3(long long a, int b);
 long long __ashlti3(long long a, int b);
 
+#ifdef CONFIG_RISCV_ISA_V
+
+#ifdef CONFIG_MMU
+asmlinkage int enter_vector_usercopy(void *dst, void *src, size_t n);
+#endif /* CONFIG_MMU  */
+
+void xor_regs_2_(unsigned long bytes, unsigned long *__restrict p1,
+		 const unsigned long *__restrict p2);
+void xor_regs_3_(unsigned long bytes, unsigned long *__restrict p1,
+		 const unsigned long *__restrict p2,
+		 const unsigned long *__restrict p3);
+void xor_regs_4_(unsigned long bytes, unsigned long *__restrict p1,
+		 const unsigned long *__restrict p2,
+		 const unsigned long *__restrict p3,
+		 const unsigned long *__restrict p4);
+void xor_regs_5_(unsigned long bytes, unsigned long *__restrict p1,
+		 const unsigned long *__restrict p2,
+		 const unsigned long *__restrict p3,
+		 const unsigned long *__restrict p4,
+		 const unsigned long *__restrict p5);
+
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+asmlinkage void riscv_v_context_nesting_start(struct pt_regs *regs);
+asmlinkage void riscv_v_context_nesting_end(struct pt_regs *regs);
+#endif /* CONFIG_RISCV_ISA_V_PREEMPTIVE */
+
+#endif /* CONFIG_RISCV_ISA_V */
 
 #define DECLARE_DO_ERROR_INFO(name)	asmlinkage void name(struct pt_regs *regs)
 
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/bitops.h linux-libre-6.8-gnu/arch/riscv/include/asm/bitops.h
index 224b4dc02b50..329d8244a9b3 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/bitops.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/bitops.h
@@ -39,7 +39,7 @@ static __always_inline unsigned long variable__ffs(unsigned long word)
 {
 	int num;
 
-	asm_volatile_goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
+	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
 				      RISCV_ISA_EXT_ZBB, 1)
 			  : : : : legacy);
 
@@ -95,7 +95,7 @@ static __always_inline unsigned long variable__fls(unsigned long word)
 {
 	int num;
 
-	asm_volatile_goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
+	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
 				      RISCV_ISA_EXT_ZBB, 1)
 			  : : : : legacy);
 
@@ -154,7 +154,7 @@ static __always_inline int variable_ffs(int x)
 	if (!x)
 		return 0;
 
-	asm_volatile_goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
+	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
 				      RISCV_ISA_EXT_ZBB, 1)
 			  : : : : legacy);
 
@@ -209,7 +209,7 @@ static __always_inline int variable_fls(unsigned int x)
 	if (!x)
 		return 0;
 
-	asm_volatile_goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
+	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
 				      RISCV_ISA_EXT_ZBB, 1)
 			  : : : : legacy);
 
@@ -271,7 +271,9 @@ legacy:
 #include <asm-generic/bitops/fls64.h>
 #include <asm-generic/bitops/sched.h>
 
-#include <asm-generic/bitops/hweight.h>
+#include <asm/arch_hweight.h>
+
+#include <asm-generic/bitops/const_hweight.h>
 
 #if (BITS_PER_LONG == 64)
 #define __AMO(op)	"amo" #op ".d"
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/cacheflush.h linux-libre-6.8-gnu/arch/riscv/include/asm/cacheflush.h
index 3cb53c4df27c..a129dac4521d 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/cacheflush.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/cacheflush.h
@@ -37,7 +37,8 @@ static inline void flush_dcache_page(struct page *page)
 	flush_icache_mm(vma->vm_mm, 0)
 
 #ifdef CONFIG_64BIT
-#define flush_cache_vmap(start, end)	flush_tlb_kernel_range(start, end)
+#define flush_cache_vmap(start, end)		flush_tlb_kernel_range(start, end)
+#define flush_cache_vmap_early(start, end)	local_flush_tlb_kernel_range(start, end)
 #endif
 
 #ifndef CONFIG_SMP
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/cfi.h linux-libre-6.8-gnu/arch/riscv/include/asm/cfi.h
index 56bf9d69d5e3..8f7a62257044 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/cfi.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/cfi.h
@@ -7,8 +7,9 @@
  *
  * Copyright (C) 2023 Google LLC
  */
+#include <linux/bug.h>
 
-#include <linux/cfi.h>
+struct pt_regs;
 
 #ifdef CONFIG_CFI_CLANG
 enum bug_trap_type handle_cfi_failure(struct pt_regs *regs);
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/checksum.h linux-libre-6.8-gnu/arch/riscv/include/asm/checksum.h
new file mode 100644
index 000000000000..88e6f1499e88
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/checksum.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Checksum routines
+ *
+ * Copyright (C) 2023 Rivos Inc.
+ */
+#ifndef __ASM_RISCV_CHECKSUM_H
+#define __ASM_RISCV_CHECKSUM_H
+
+#include <linux/in6.h>
+#include <linux/uaccess.h>
+
+#define ip_fast_csum ip_fast_csum
+
+extern unsigned int do_csum(const unsigned char *buff, int len);
+#define do_csum do_csum
+
+/* Default version is sufficient for 32 bit */
+#ifndef CONFIG_32BIT
+#define _HAVE_ARCH_IPV6_CSUM
+__sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+			const struct in6_addr *daddr,
+			__u32 len, __u8 proto, __wsum sum);
+#endif
+
+/* Define riscv versions of functions before importing asm-generic/checksum.h */
+#include <asm-generic/checksum.h>
+
+/**
+ * Quickly compute an IP checksum with the assumption that IPv4 headers will
+ * always be in multiples of 32-bits, and have an ihl of at least 5.
+ *
+ * @ihl: the number of 32 bit segments and must be greater than or equal to 5.
+ * @iph: assumed to be word aligned given that NET_IP_ALIGN is set to 2 on
+ *  riscv, defining IP headers to be aligned.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned long csum = 0;
+	int pos = 0;
+
+	do {
+		csum += ((const unsigned int *)iph)[pos];
+		if (IS_ENABLED(CONFIG_32BIT))
+			csum += csum < ((const unsigned int *)iph)[pos];
+	} while (++pos < ihl);
+
+	/*
+	 * ZBB only saves three instructions on 32-bit and five on 64-bit so not
+	 * worth checking if supported without Alternatives.
+	 */
+	if (IS_ENABLED(CONFIG_RISCV_ISA_ZBB) &&
+	    IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) {
+		unsigned long fold_temp;
+
+		asm goto(ALTERNATIVE("j %l[no_zbb]", "nop", 0,
+					      RISCV_ISA_EXT_ZBB, 1)
+		    :
+		    :
+		    :
+		    : no_zbb);
+
+		if (IS_ENABLED(CONFIG_32BIT)) {
+			asm(".option push				\n\
+			.option arch,+zbb				\n\
+				not	%[fold_temp], %[csum]		\n\
+				rori	%[csum], %[csum], 16		\n\
+				sub	%[csum], %[fold_temp], %[csum]	\n\
+			.option pop"
+			: [csum] "+r" (csum), [fold_temp] "=&r" (fold_temp));
+		} else {
+			asm(".option push				\n\
+			.option arch,+zbb				\n\
+				rori	%[fold_temp], %[csum], 32	\n\
+				add	%[csum], %[fold_temp], %[csum]	\n\
+				srli	%[csum], %[csum], 32		\n\
+				not	%[fold_temp], %[csum]		\n\
+				roriw	%[csum], %[csum], 16		\n\
+				subw	%[csum], %[fold_temp], %[csum]	\n\
+			.option pop"
+			: [csum] "+r" (csum), [fold_temp] "=&r" (fold_temp));
+		}
+		return (__force __sum16)(csum >> 16);
+	}
+no_zbb:
+#ifndef CONFIG_32BIT
+	csum += ror64(csum, 32);
+	csum >>= 32;
+#endif
+	return csum_fold((__force __wsum)csum);
+}
+
+#endif /* __ASM_RISCV_CHECKSUM_H */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/cpu_ops.h linux-libre-6.8-gnu/arch/riscv/include/asm/cpu_ops.h
index aa128466c4d4..176b570ef982 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/cpu_ops.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/cpu_ops.h
@@ -13,33 +13,23 @@
 /**
  * struct cpu_operations - Callback operations for hotplugging CPUs.
  *
- * @name:		Name of the boot protocol.
- * @cpu_prepare:	Early one-time preparation step for a cpu. If there
- *			is a mechanism for doing so, tests whether it is
- *			possible to boot the given HART.
  * @cpu_start:		Boots a cpu into the kernel.
- * @cpu_disable:	Prepares a cpu to die. May fail for some
- *			mechanism-specific reason, which will cause the hot
- *			unplug to be aborted. Called from the cpu to be killed.
  * @cpu_stop:		Makes a cpu leave the kernel. Must not fail. Called from
  *			the cpu being stopped.
  * @cpu_is_stopped:	Ensures a cpu has left the kernel. Called from another
  *			cpu.
  */
 struct cpu_operations {
-	const char	*name;
-	int		(*cpu_prepare)(unsigned int cpu);
 	int		(*cpu_start)(unsigned int cpu,
 				     struct task_struct *tidle);
 #ifdef CONFIG_HOTPLUG_CPU
-	int		(*cpu_disable)(unsigned int cpu);
 	void		(*cpu_stop)(void);
 	int		(*cpu_is_stopped)(unsigned int cpu);
 #endif
 };
 
 extern const struct cpu_operations cpu_ops_spinwait;
-extern const struct cpu_operations *cpu_ops[NR_CPUS];
-void __init cpu_set_ops(int cpu);
+extern const struct cpu_operations *cpu_ops;
+void __init cpu_set_ops(void);
 
 #endif /* ifndef __ASM_CPU_OPS_H */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/cpufeature.h linux-libre-6.8-gnu/arch/riscv/include/asm/cpufeature.h
index a418c3112cd6..0bd11862b760 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/cpufeature.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/cpufeature.h
@@ -59,6 +59,8 @@ struct riscv_isa_ext_data {
 	const unsigned int id;
 	const char *name;
 	const char *property;
+	const unsigned int *subset_ext_ids;
+	const unsigned int subset_ext_size;
 };
 
 extern const struct riscv_isa_ext_data riscv_isa_ext[];
@@ -67,7 +69,7 @@ extern bool riscv_isa_fallback;
 
 unsigned long riscv_isa_extension_base(const unsigned long *isa_bitmap);
 
-bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, int bit);
+bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, unsigned int bit);
 #define riscv_isa_extension_available(isa_bitmap, ext)	\
 	__riscv_isa_extension_available(isa_bitmap, RISCV_ISA_EXT_##ext)
 
@@ -78,7 +80,7 @@ riscv_has_extension_likely(const unsigned long ext)
 			   "ext must be < RISCV_ISA_EXT_MAX");
 
 	if (IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) {
-		asm_volatile_goto(
+		asm goto(
 		ALTERNATIVE("j	%l[l_no]", "nop", 0, %[ext], 1)
 		:
 		: [ext] "i" (ext)
@@ -101,7 +103,7 @@ riscv_has_extension_unlikely(const unsigned long ext)
 			   "ext must be < RISCV_ISA_EXT_MAX");
 
 	if (IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) {
-		asm_volatile_goto(
+		asm goto(
 		ALTERNATIVE("nop", "j	%l[l_yes]", 0, %[ext], 1)
 		:
 		: [ext] "i" (ext)
@@ -133,4 +135,6 @@ static __always_inline bool riscv_cpu_has_extension_unlikely(int cpu, const unsi
 	return __riscv_isa_extension_available(hart_isa[cpu].isa, ext);
 }
 
+DECLARE_STATIC_KEY_FALSE(fast_misaligned_access_speed_key);
+
 #endif
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/csr.h linux-libre-6.8-gnu/arch/riscv/include/asm/csr.h
index 306a19a5509c..2468c55933cd 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/csr.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/csr.h
@@ -411,10 +411,20 @@
 #define CSR_VTYPE		0xc21
 #define CSR_VLENB		0xc22
 
+/* Scalar Crypto Extension - Entropy */
+#define CSR_SEED		0x015
+#define SEED_OPST_MASK		_AC(0xC0000000, UL)
+#define SEED_OPST_BIST		_AC(0x00000000, UL)
+#define SEED_OPST_WAIT		_AC(0x40000000, UL)
+#define SEED_OPST_ES16		_AC(0x80000000, UL)
+#define SEED_OPST_DEAD		_AC(0xC0000000, UL)
+#define SEED_ENTROPY_MASK	_AC(0xFFFF, UL)
+
 #ifdef CONFIG_RISCV_M_MODE
 # define CSR_STATUS	CSR_MSTATUS
 # define CSR_IE		CSR_MIE
 # define CSR_TVEC	CSR_MTVEC
+# define CSR_ENVCFG	CSR_MENVCFG
 # define CSR_SCRATCH	CSR_MSCRATCH
 # define CSR_EPC	CSR_MEPC
 # define CSR_CAUSE	CSR_MCAUSE
@@ -439,6 +449,7 @@
 # define CSR_STATUS	CSR_SSTATUS
 # define CSR_IE		CSR_SIE
 # define CSR_TVEC	CSR_STVEC
+# define CSR_ENVCFG	CSR_SENVCFG
 # define CSR_SCRATCH	CSR_SSCRATCH
 # define CSR_EPC	CSR_SEPC
 # define CSR_CAUSE	CSR_SCAUSE
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/entry-common.h linux-libre-6.8-gnu/arch/riscv/include/asm/entry-common.h
index 7ab5e34318c8..2293e535f865 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/entry-common.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/entry-common.h
@@ -4,6 +4,23 @@
 #define _ASM_RISCV_ENTRY_COMMON_H
 
 #include <asm/stacktrace.h>
+#include <asm/thread_info.h>
+#include <asm/vector.h>
+
+static inline void arch_exit_to_user_mode_prepare(struct pt_regs *regs,
+						  unsigned long ti_work)
+{
+	if (ti_work & _TIF_RISCV_V_DEFER_RESTORE) {
+		clear_thread_flag(TIF_RISCV_V_DEFER_RESTORE);
+		/*
+		 * We are already called with irq disabled, so go without
+		 * keeping track of riscv_v_flags.
+		 */
+		riscv_v_vstate_restore(&current->thread.vstate, regs);
+	}
+}
+
+#define arch_exit_to_user_mode_prepare arch_exit_to_user_mode_prepare
 
 void handle_page_fault(struct pt_regs *regs);
 void handle_break(struct pt_regs *regs);
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/errata_list.h linux-libre-6.8-gnu/arch/riscv/include/asm/errata_list.h
index 83ed25e43553..ea33288f8a25 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/errata_list.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/errata_list.h
@@ -24,9 +24,8 @@
 
 #ifdef CONFIG_ERRATA_THEAD
 #define	ERRATA_THEAD_PBMT 0
-#define	ERRATA_THEAD_CMO 1
-#define	ERRATA_THEAD_PMU 2
-#define	ERRATA_THEAD_NUMBER 3
+#define	ERRATA_THEAD_PMU 1
+#define	ERRATA_THEAD_NUMBER 2
 #endif
 
 #ifdef __ASSEMBLY__
@@ -94,54 +93,17 @@ asm volatile(ALTERNATIVE(						\
 #define ALT_THEAD_PMA(_val)
 #endif
 
-/*
- * th.dcache.ipa rs1 (invalidate, physical address)
- * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
- *   0000001    01010      rs1       000      00000  0001011
- * th.dache.iva rs1 (invalida, virtual address)
- *   0000001    00110      rs1       000      00000  0001011
- *
- * th.dcache.cpa rs1 (clean, physical address)
- * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
- *   0000001    01001      rs1       000      00000  0001011
- * th.dcache.cva rs1 (clean, virtual address)
- *   0000001    00101      rs1       000      00000  0001011
- *
- * th.dcache.cipa rs1 (clean then invalidate, physical address)
- * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
- *   0000001    01011      rs1       000      00000  0001011
- * th.dcache.civa rs1 (... virtual address)
- *   0000001    00111      rs1       000      00000  0001011
- *
- * th.sync.s (make sure all cache operations finished)
- * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
- *   0000000    11001     00000      000      00000  0001011
- */
-#define THEAD_INVAL_A0	".long 0x0265000b"
-#define THEAD_CLEAN_A0	".long 0x0255000b"
-#define THEAD_FLUSH_A0	".long 0x0275000b"
-#define THEAD_SYNC_S	".long 0x0190000b"
-
 #define ALT_CMO_OP(_op, _start, _size, _cachesize)			\
-asm volatile(ALTERNATIVE_2(						\
-	__nops(6),							\
+asm volatile(ALTERNATIVE(						\
+	__nops(5),							\
 	"mv a0, %1\n\t"							\
 	"j 2f\n\t"							\
 	"3:\n\t"							\
 	CBO_##_op(a0)							\
 	"add a0, a0, %0\n\t"						\
 	"2:\n\t"							\
-	"bltu a0, %2, 3b\n\t"						\
-	"nop", 0, RISCV_ISA_EXT_ZICBOM, CONFIG_RISCV_ISA_ZICBOM,	\
-	"mv a0, %1\n\t"							\
-	"j 2f\n\t"							\
-	"3:\n\t"							\
-	THEAD_##_op##_A0 "\n\t"						\
-	"add a0, a0, %0\n\t"						\
-	"2:\n\t"							\
-	"bltu a0, %2, 3b\n\t"						\
-	THEAD_SYNC_S, THEAD_VENDOR_ID,					\
-			ERRATA_THEAD_CMO, CONFIG_ERRATA_THEAD_CMO)	\
+	"bltu a0, %2, 3b\n\t",						\
+	0, RISCV_ISA_EXT_ZICBOM, CONFIG_RISCV_ISA_ZICBOM)		\
 	: : "r"(_cachesize),						\
 	    "r"((unsigned long)(_start) & ~((_cachesize) - 1UL)),	\
 	    "r"((unsigned long)(_start) + (_size))			\
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/ftrace.h linux-libre-6.8-gnu/arch/riscv/include/asm/ftrace.h
index 2b2f5df7ef2c..15055f9df4da 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/ftrace.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/ftrace.h
@@ -25,6 +25,11 @@
 
 #define ARCH_SUPPORTS_FTRACE_OPS 1
 #ifndef __ASSEMBLY__
+
+extern void *return_address(unsigned int level);
+
+#define ftrace_return_address(n) return_address(n)
+
 void MCOUNT_NAME(void);
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
 {
@@ -128,7 +133,23 @@ do {									\
 struct dyn_ftrace;
 int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec);
 #define ftrace_init_nop ftrace_init_nop
-#endif
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+struct ftrace_ops;
+struct ftrace_regs;
+void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
+		       struct ftrace_ops *op, struct ftrace_regs *fregs);
+#define ftrace_graph_func ftrace_graph_func
+
+static inline void __arch_ftrace_set_direct_caller(struct pt_regs *regs, unsigned long addr)
+{
+		regs->t1 = addr;
+}
+#define arch_ftrace_set_direct_caller(fregs, addr) \
+	__arch_ftrace_set_direct_caller(&(fregs)->regs, addr)
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
+
+#endif /* __ASSEMBLY__ */
 
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/hugetlb.h linux-libre-6.8-gnu/arch/riscv/include/asm/hugetlb.h
index 4c5b0e929890..22deb7a2a6ec 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/hugetlb.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/hugetlb.h
@@ -11,6 +11,11 @@ static inline void arch_clear_hugepage_flags(struct page *page)
 }
 #define arch_clear_hugepage_flags arch_clear_hugepage_flags
 
+#ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
+bool arch_hugetlb_migration_supported(struct hstate *h);
+#define arch_hugetlb_migration_supported arch_hugetlb_migration_supported
+#endif
+
 #ifdef CONFIG_RISCV_ISA_SVNAPOT
 #define __HAVE_ARCH_HUGE_PTE_CLEAR
 void huge_pte_clear(struct mm_struct *mm, unsigned long addr,
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/hwcap.h linux-libre-6.8-gnu/arch/riscv/include/asm/hwcap.h
index 06d30526ef3b..1f2d2599c655 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/hwcap.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/hwcap.h
@@ -11,19 +11,13 @@
 #include <uapi/asm/hwcap.h>
 
 #define RISCV_ISA_EXT_a		('a' - 'a')
-#define RISCV_ISA_EXT_b		('b' - 'a')
 #define RISCV_ISA_EXT_c		('c' - 'a')
 #define RISCV_ISA_EXT_d		('d' - 'a')
 #define RISCV_ISA_EXT_f		('f' - 'a')
 #define RISCV_ISA_EXT_h		('h' - 'a')
 #define RISCV_ISA_EXT_i		('i' - 'a')
-#define RISCV_ISA_EXT_j		('j' - 'a')
-#define RISCV_ISA_EXT_k		('k' - 'a')
 #define RISCV_ISA_EXT_m		('m' - 'a')
-#define RISCV_ISA_EXT_p		('p' - 'a')
 #define RISCV_ISA_EXT_q		('q' - 'a')
-#define RISCV_ISA_EXT_s		('s' - 'a')
-#define RISCV_ISA_EXT_u		('u' - 'a')
 #define RISCV_ISA_EXT_v		('v' - 'a')
 
 /*
@@ -57,8 +51,40 @@
 #define RISCV_ISA_EXT_ZIHPM		42
 #define RISCV_ISA_EXT_SMSTATEEN		43
 #define RISCV_ISA_EXT_ZICOND		44
+#define RISCV_ISA_EXT_ZBC		45
+#define RISCV_ISA_EXT_ZBKB		46
+#define RISCV_ISA_EXT_ZBKC		47
+#define RISCV_ISA_EXT_ZBKX		48
+#define RISCV_ISA_EXT_ZKND		49
+#define RISCV_ISA_EXT_ZKNE		50
+#define RISCV_ISA_EXT_ZKNH		51
+#define RISCV_ISA_EXT_ZKR		52
+#define RISCV_ISA_EXT_ZKSED		53
+#define RISCV_ISA_EXT_ZKSH		54
+#define RISCV_ISA_EXT_ZKT		55
+#define RISCV_ISA_EXT_ZVBB		56
+#define RISCV_ISA_EXT_ZVBC		57
+#define RISCV_ISA_EXT_ZVKB		58
+#define RISCV_ISA_EXT_ZVKG		59
+#define RISCV_ISA_EXT_ZVKNED		60
+#define RISCV_ISA_EXT_ZVKNHA		61
+#define RISCV_ISA_EXT_ZVKNHB		62
+#define RISCV_ISA_EXT_ZVKSED		63
+#define RISCV_ISA_EXT_ZVKSH		64
+#define RISCV_ISA_EXT_ZVKT		65
+#define RISCV_ISA_EXT_ZFH		66
+#define RISCV_ISA_EXT_ZFHMIN		67
+#define RISCV_ISA_EXT_ZIHINTNTL		68
+#define RISCV_ISA_EXT_ZVFH		69
+#define RISCV_ISA_EXT_ZVFHMIN		70
+#define RISCV_ISA_EXT_ZFA		71
+#define RISCV_ISA_EXT_ZTSO		72
+#define RISCV_ISA_EXT_ZACAS		73
 
-#define RISCV_ISA_EXT_MAX		64
+#define RISCV_ISA_EXT_XLINUXENVCFG	127
+
+#define RISCV_ISA_EXT_MAX		128
+#define RISCV_ISA_EXT_INVALID		U32_MAX
 
 #ifdef CONFIG_RISCV_M_MODE
 #define RISCV_ISA_EXT_SxAIA		RISCV_ISA_EXT_SMAIA
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/hwprobe.h linux-libre-6.8-gnu/arch/riscv/include/asm/hwprobe.h
index 5c48f48e79a6..630507dff5ea 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/hwprobe.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/hwprobe.h
@@ -15,4 +15,28 @@ static inline bool riscv_hwprobe_key_is_valid(__s64 key)
 	return key >= 0 && key <= RISCV_HWPROBE_MAX_KEY;
 }
 
+static inline bool hwprobe_key_is_bitmask(__s64 key)
+{
+	switch (key) {
+	case RISCV_HWPROBE_KEY_BASE_BEHAVIOR:
+	case RISCV_HWPROBE_KEY_IMA_EXT_0:
+	case RISCV_HWPROBE_KEY_CPUPERF_0:
+		return true;
+	}
+
+	return false;
+}
+
+static inline bool riscv_hwprobe_pair_cmp(struct riscv_hwprobe *pair,
+					  struct riscv_hwprobe *other_pair)
+{
+	if (pair->key != other_pair->key)
+		return false;
+
+	if (hwprobe_key_is_bitmask(pair->key))
+		return (pair->value & other_pair->value) == other_pair->value;
+
+	return pair->value == other_pair->value;
+}
+
 #endif
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/irq_work.h linux-libre-6.8-gnu/arch/riscv/include/asm/irq_work.h
index b53891964ae0..b27a4d64fc6a 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/irq_work.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/irq_work.h
@@ -6,5 +6,5 @@ static inline bool arch_irq_work_has_interrupt(void)
 {
 	return IS_ENABLED(CONFIG_SMP);
 }
-extern void arch_irq_work_raise(void);
+
 #endif /* _ASM_RISCV_IRQ_WORK_H */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/jump_label.h linux-libre-6.8-gnu/arch/riscv/include/asm/jump_label.h
index 14a5ea8d8ef0..4a35d787c019 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/jump_label.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/jump_label.h
@@ -17,7 +17,7 @@
 static __always_inline bool arch_static_branch(struct static_key * const key,
 					       const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"	.align		2			\n\t"
 		"	.option push				\n\t"
 		"	.option norelax				\n\t"
@@ -39,7 +39,7 @@ label:
 static __always_inline bool arch_static_branch_jump(struct static_key * const key,
 						    const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"	.align		2			\n\t"
 		"	.option push				\n\t"
 		"	.option norelax				\n\t"
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/kfence.h linux-libre-6.8-gnu/arch/riscv/include/asm/kfence.h
index 0bbffd528096..7388edd88986 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/kfence.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/kfence.h
@@ -18,9 +18,9 @@ static inline bool kfence_protect_page(unsigned long addr, bool protect)
 	pte_t *pte = virt_to_kpte(addr);
 
 	if (protect)
-		set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT));
+		set_pte(pte, __pte(pte_val(ptep_get(pte)) & ~_PAGE_PRESENT));
 	else
-		set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT));
+		set_pte(pte, __pte(pte_val(ptep_get(pte)) | _PAGE_PRESENT));
 
 	flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
 
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/kvm_host.h linux-libre-6.8-gnu/arch/riscv/include/asm/kvm_host.h
index 0eefd9c991ae..484d04a92fa6 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/kvm_host.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/kvm_host.h
@@ -41,6 +41,7 @@
 	KVM_ARCH_REQ_FLAGS(4, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
 #define KVM_REQ_HFENCE			\
 	KVM_ARCH_REQ_FLAGS(5, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
+#define KVM_REQ_STEAL_UPDATE		KVM_ARCH_REQ(6)
 
 enum kvm_riscv_hfence_type {
 	KVM_RISCV_HFENCE_UNKNOWN = 0,
@@ -262,13 +263,17 @@ struct kvm_vcpu_arch {
 
 	/* 'static' configurations which are set only once */
 	struct kvm_vcpu_config cfg;
+
+	/* SBI steal-time accounting */
+	struct {
+		gpa_t shmem;
+		u64 last_steal;
+	} sta;
 };
 
 static inline void kvm_arch_sync_events(struct kvm *kvm) {}
 static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
 
-#define KVM_ARCH_WANT_MMU_NOTIFIER
-
 #define KVM_RISCV_GSTAGE_TLB_MIN_ORDER		12
 
 void kvm_riscv_local_hfence_gvma_vmid_gpa(unsigned long vmid,
@@ -372,4 +377,7 @@ bool kvm_riscv_vcpu_has_interrupts(struct kvm_vcpu *vcpu, u64 mask);
 void kvm_riscv_vcpu_power_off(struct kvm_vcpu *vcpu);
 void kvm_riscv_vcpu_power_on(struct kvm_vcpu *vcpu);
 
+void kvm_riscv_vcpu_sbi_sta_reset(struct kvm_vcpu *vcpu);
+void kvm_riscv_vcpu_record_steal_time(struct kvm_vcpu *vcpu);
+
 #endif /* __RISCV_KVM_HOST_H__ */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/kvm_vcpu_sbi.h linux-libre-6.8-gnu/arch/riscv/include/asm/kvm_vcpu_sbi.h
index 6a453f7f8b56..b96705258cf9 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/kvm_vcpu_sbi.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/kvm_vcpu_sbi.h
@@ -15,9 +15,10 @@
 #define KVM_SBI_VERSION_MINOR 0
 
 enum kvm_riscv_sbi_ext_status {
-	KVM_RISCV_SBI_EXT_UNINITIALIZED,
-	KVM_RISCV_SBI_EXT_AVAILABLE,
-	KVM_RISCV_SBI_EXT_UNAVAILABLE,
+	KVM_RISCV_SBI_EXT_STATUS_UNINITIALIZED,
+	KVM_RISCV_SBI_EXT_STATUS_UNAVAILABLE,
+	KVM_RISCV_SBI_EXT_STATUS_ENABLED,
+	KVM_RISCV_SBI_EXT_STATUS_DISABLED,
 };
 
 struct kvm_vcpu_sbi_context {
@@ -36,7 +37,7 @@ struct kvm_vcpu_sbi_extension {
 	unsigned long extid_start;
 	unsigned long extid_end;
 
-	bool default_unavail;
+	bool default_disabled;
 
 	/**
 	 * SBI extension handler. It can be defined for a given extension or group of
@@ -59,11 +60,21 @@ int kvm_riscv_vcpu_set_reg_sbi_ext(struct kvm_vcpu *vcpu,
 				   const struct kvm_one_reg *reg);
 int kvm_riscv_vcpu_get_reg_sbi_ext(struct kvm_vcpu *vcpu,
 				   const struct kvm_one_reg *reg);
+int kvm_riscv_vcpu_set_reg_sbi(struct kvm_vcpu *vcpu,
+			       const struct kvm_one_reg *reg);
+int kvm_riscv_vcpu_get_reg_sbi(struct kvm_vcpu *vcpu,
+			       const struct kvm_one_reg *reg);
 const struct kvm_vcpu_sbi_extension *kvm_vcpu_sbi_find_ext(
 				struct kvm_vcpu *vcpu, unsigned long extid);
+bool riscv_vcpu_supports_sbi_ext(struct kvm_vcpu *vcpu, int idx);
 int kvm_riscv_vcpu_sbi_ecall(struct kvm_vcpu *vcpu, struct kvm_run *run);
 void kvm_riscv_vcpu_sbi_init(struct kvm_vcpu *vcpu);
 
+int kvm_riscv_vcpu_get_reg_sbi_sta(struct kvm_vcpu *vcpu, unsigned long reg_num,
+				   unsigned long *reg_val);
+int kvm_riscv_vcpu_set_reg_sbi_sta(struct kvm_vcpu *vcpu, unsigned long reg_num,
+				   unsigned long reg_val);
+
 #ifdef CONFIG_RISCV_SBI_V01
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_v01;
 #endif
@@ -74,6 +85,7 @@ extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_rfence;
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_srst;
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_hsm;
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_dbcn;
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_sta;
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_experimental;
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_vendor;
 
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/paravirt.h linux-libre-6.8-gnu/arch/riscv/include/asm/paravirt.h
new file mode 100644
index 000000000000..c0abde70fc2c
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/paravirt.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_RISCV_PARAVIRT_H
+#define _ASM_RISCV_PARAVIRT_H
+
+#ifdef CONFIG_PARAVIRT
+#include <linux/static_call_types.h>
+
+struct static_key;
+extern struct static_key paravirt_steal_enabled;
+extern struct static_key paravirt_steal_rq_enabled;
+
+u64 dummy_steal_clock(int cpu);
+
+DECLARE_STATIC_CALL(pv_steal_clock, dummy_steal_clock);
+
+static inline u64 paravirt_steal_clock(int cpu)
+{
+	return static_call(pv_steal_clock)(cpu);
+}
+
+int __init pv_time_init(void);
+
+#else
+
+#define pv_time_init() do {} while (0)
+
+#endif /* CONFIG_PARAVIRT */
+#endif /* _ASM_RISCV_PARAVIRT_H */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/paravirt_api_clock.h linux-libre-6.8-gnu/arch/riscv/include/asm/paravirt_api_clock.h
new file mode 100644
index 000000000000..65ac7cee0dad
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/paravirt_api_clock.h
@@ -0,0 +1 @@
+#include <asm/paravirt.h>
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/pgalloc.h linux-libre-6.8-gnu/arch/riscv/include/asm/pgalloc.h
index d169a4f41a2e..c80bb9990d32 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/pgalloc.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/pgalloc.h
@@ -95,7 +95,13 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 		__pud_free(mm, pud);
 }
 
-#define __pud_free_tlb(tlb, pud, addr)  pud_free((tlb)->mm, pud)
+#define __pud_free_tlb(tlb, pud, addr)					\
+do {									\
+	if (pgtable_l4_enabled) {					\
+		pagetable_pud_dtor(virt_to_ptdesc(pud));		\
+		tlb_remove_page_ptdesc((tlb), virt_to_ptdesc(pud));	\
+	}								\
+} while (0)
 
 #define p4d_alloc_one p4d_alloc_one
 static inline p4d_t *p4d_alloc_one(struct mm_struct *mm, unsigned long addr)
@@ -124,7 +130,11 @@ static inline void p4d_free(struct mm_struct *mm, p4d_t *p4d)
 		__p4d_free(mm, p4d);
 }
 
-#define __p4d_free_tlb(tlb, p4d, addr)  p4d_free((tlb)->mm, p4d)
+#define __p4d_free_tlb(tlb, p4d, addr)					\
+do {									\
+	if (pgtable_l5_enabled)						\
+		tlb_remove_page_ptdesc((tlb), virt_to_ptdesc(p4d));	\
+} while (0)
 #endif /* __PAGETABLE_PMD_FOLDED */
 
 static inline void sync_kernel_mappings(pgd_t *pgd)
@@ -149,7 +159,11 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 
 #ifndef __PAGETABLE_PMD_FOLDED
 
-#define __pmd_free_tlb(tlb, pmd, addr)  pmd_free((tlb)->mm, pmd)
+#define __pmd_free_tlb(tlb, pmd, addr)				\
+do {								\
+	pagetable_pmd_dtor(virt_to_ptdesc(pmd));		\
+	tlb_remove_page_ptdesc((tlb), virt_to_ptdesc(pmd));	\
+} while (0)
 
 #endif /* __PAGETABLE_PMD_FOLDED */
 
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/pgtable-64.h linux-libre-6.8-gnu/arch/riscv/include/asm/pgtable-64.h
index 9a2c780a11e9..b99bd66107a6 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/pgtable-64.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/pgtable-64.h
@@ -136,7 +136,7 @@ enum napot_cont_order {
  * 10010 - IO   Strongly-ordered, Non-cacheable, Non-bufferable, Shareable, Non-trustable
  */
 #define _PAGE_PMA_THEAD		((1UL << 62) | (1UL << 61) | (1UL << 60))
-#define _PAGE_NOCACHE_THEAD	((1UL < 61) | (1UL << 60))
+#define _PAGE_NOCACHE_THEAD	((1UL << 61) | (1UL << 60))
 #define _PAGE_IO_THEAD		((1UL << 63) | (1UL << 60))
 #define _PAGE_MTMASK_THEAD	(_PAGE_PMA_THEAD | _PAGE_IO_THEAD | (1UL << 59))
 
@@ -202,7 +202,7 @@ static inline int pud_user(pud_t pud)
 
 static inline void set_pud(pud_t *pudp, pud_t pud)
 {
-	*pudp = pud;
+	WRITE_ONCE(*pudp, pud);
 }
 
 static inline void pud_clear(pud_t *pudp)
@@ -278,7 +278,7 @@ static inline unsigned long _pmd_pfn(pmd_t pmd)
 static inline void set_p4d(p4d_t *p4dp, p4d_t p4d)
 {
 	if (pgtable_l4_enabled)
-		*p4dp = p4d;
+		WRITE_ONCE(*p4dp, p4d);
 	else
 		set_pud((pud_t *)p4dp, (pud_t){ p4d_val(p4d) });
 }
@@ -340,18 +340,12 @@ static inline struct page *p4d_page(p4d_t p4d)
 #define pud_index(addr) (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
 
 #define pud_offset pud_offset
-static inline pud_t *pud_offset(p4d_t *p4d, unsigned long address)
-{
-	if (pgtable_l4_enabled)
-		return p4d_pgtable(*p4d) + pud_index(address);
-
-	return (pud_t *)p4d;
-}
+pud_t *pud_offset(p4d_t *p4d, unsigned long address);
 
 static inline void set_pgd(pgd_t *pgdp, pgd_t pgd)
 {
 	if (pgtable_l5_enabled)
-		*pgdp = pgd;
+		WRITE_ONCE(*pgdp, pgd);
 	else
 		set_p4d((p4d_t *)pgdp, (p4d_t){ pgd_val(pgd) });
 }
@@ -404,12 +398,6 @@ static inline struct page *pgd_page(pgd_t pgd)
 #define p4d_index(addr) (((addr) >> P4D_SHIFT) & (PTRS_PER_P4D - 1))
 
 #define p4d_offset p4d_offset
-static inline p4d_t *p4d_offset(pgd_t *pgd, unsigned long address)
-{
-	if (pgtable_l5_enabled)
-		return pgd_pgtable(*pgd) + p4d_index(address);
-
-	return (p4d_t *)pgd;
-}
+p4d_t *p4d_offset(pgd_t *pgd, unsigned long address);
 
 #endif /* _ASM_RISCV_PGTABLE_64_H */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/pgtable.h linux-libre-6.8-gnu/arch/riscv/include/asm/pgtable.h
index ab00235b018f..6066822e7396 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/pgtable.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/pgtable.h
@@ -84,7 +84,7 @@
  * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
  * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
  */
-#define vmemmap		((struct page *)VMEMMAP_START)
+#define vmemmap		((struct page *)VMEMMAP_START - (phys_ram_base >> PAGE_SHIFT))
 
 #define PCI_IO_SIZE      SZ_16M
 #define PCI_IO_END       VMEMMAP_START
@@ -248,7 +248,7 @@ static inline int pmd_leaf(pmd_t pmd)
 
 static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
 {
-	*pmdp = pmd;
+	WRITE_ONCE(*pmdp, pmd);
 }
 
 static inline void pmd_clear(pmd_t *pmdp)
@@ -439,6 +439,10 @@ static inline pte_t pte_mkhuge(pte_t pte)
 	return pte;
 }
 
+#define pte_leaf_size(pte)	(pte_napot(pte) ?				\
+					napot_cont_size(napot_cont_order(pte)) :\
+					PAGE_SIZE)
+
 #ifdef CONFIG_NUMA_BALANCING
 /*
  * See the comment in include/asm-generic/pgtable.h
@@ -510,7 +514,7 @@ static inline int pte_same(pte_t pte_a, pte_t pte_b)
  */
 static inline void set_pte(pte_t *ptep, pte_t pteval)
 {
-	*ptep = pteval;
+	WRITE_ONCE(*ptep, pteval);
 }
 
 void flush_icache_pte(pte_t pte);
@@ -544,19 +548,12 @@ static inline void pte_clear(struct mm_struct *mm,
 	__set_pte_at(ptep, __pte(0));
 }
 
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-static inline int ptep_set_access_flags(struct vm_area_struct *vma,
-					unsigned long address, pte_t *ptep,
-					pte_t entry, int dirty)
-{
-	if (!pte_same(*ptep, entry))
-		__set_pte_at(ptep, entry);
-	/*
-	 * update_mmu_cache will unconditionally execute, handling both
-	 * the case that the PTE changed and the spurious fault case.
-	 */
-	return true;
-}
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS	/* defined in mm/pgtable.c */
+extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
+				 pte_t *ptep, pte_t entry, int dirty);
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG	/* defined in mm/pgtable.c */
+extern int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long address,
+				     pte_t *ptep);
 
 #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
 static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
@@ -569,16 +566,6 @@ static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
 	return pte;
 }
 
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
-					    unsigned long address,
-					    pte_t *ptep)
-{
-	if (!pte_young(*ptep))
-		return 0;
-	return test_and_clear_bit(_PAGE_ACCESSED_OFFSET, &pte_val(*ptep));
-}
-
 #define __HAVE_ARCH_PTEP_SET_WRPROTECT
 static inline void ptep_set_wrprotect(struct mm_struct *mm,
 				      unsigned long address, pte_t *ptep)
@@ -673,6 +660,7 @@ static inline int pmd_write(pmd_t pmd)
 	return pte_write(pmd_pte(pmd));
 }
 
+#define pmd_dirty pmd_dirty
 static inline int pmd_dirty(pmd_t pmd)
 {
 	return pte_dirty(pmd_pte(pmd));
@@ -881,7 +869,7 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
 #define TASK_SIZE_MIN	(PGDIR_SIZE_L3 * PTRS_PER_PGD / 2)
 
 #ifdef CONFIG_COMPAT
-#define TASK_SIZE_32	(_AC(0x80000000, UL) - PAGE_SIZE)
+#define TASK_SIZE_32	(_AC(0x80000000, UL))
 #define TASK_SIZE	(test_thread_flag(TIF_32BIT) ? \
 			 TASK_SIZE_32 : TASK_SIZE_64)
 #else
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/processor.h linux-libre-6.8-gnu/arch/riscv/include/asm/processor.h
index f19f861cda54..a8509cc31ab2 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/processor.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/processor.h
@@ -16,7 +16,7 @@
 
 #ifdef CONFIG_64BIT
 #define DEFAULT_MAP_WINDOW	(UL(1) << (MMAP_VA_BITS - 1))
-#define STACK_TOP_MAX		TASK_SIZE_64
+#define STACK_TOP_MAX		TASK_SIZE
 
 #define arch_get_mmap_end(addr, len, flags)			\
 ({								\
@@ -73,6 +73,43 @@
 struct task_struct;
 struct pt_regs;
 
+/*
+ * We use a flag to track in-kernel Vector context. Currently the flag has the
+ * following meaning:
+ *
+ *  - bit 0: indicates whether the in-kernel Vector context is active. The
+ *    activation of this state disables the preemption. On a non-RT kernel, it
+ *    also disable bh.
+ *  - bits 8: is used for tracking preemptible kernel-mode Vector, when
+ *    RISCV_ISA_V_PREEMPTIVE is enabled. Calling kernel_vector_begin() does not
+ *    disable the preemption if the thread's kernel_vstate.datap is allocated.
+ *    Instead, the kernel set this bit field. Then the trap entry/exit code
+ *    knows if we are entering/exiting the context that owns preempt_v.
+ *     - 0: the task is not using preempt_v
+ *     - 1: the task is actively using preempt_v. But whether does the task own
+ *          the preempt_v context is decided by bits in RISCV_V_CTX_DEPTH_MASK.
+ *  - bit 16-23 are RISCV_V_CTX_DEPTH_MASK, used by context tracking routine
+ *     when preempt_v starts:
+ *     - 0: the task is actively using, and own preempt_v context.
+ *     - non-zero: the task was using preempt_v, but then took a trap within.
+ *       Thus, the task does not own preempt_v. Any use of Vector will have to
+ *       save preempt_v, if dirty, and fallback to non-preemptible kernel-mode
+ *       Vector.
+ *  - bit 30: The in-kernel preempt_v context is saved, and requries to be
+ *    restored when returning to the context that owns the preempt_v.
+ *  - bit 31: The in-kernel preempt_v context is dirty, as signaled by the
+ *    trap entry code. Any context switches out-of current task need to save
+ *    it to the task's in-kernel V context. Also, any traps nesting on-top-of
+ *    preempt_v requesting to use V needs a save.
+ */
+#define RISCV_V_CTX_DEPTH_MASK		0x00ff0000
+
+#define RISCV_V_CTX_UNIT_DEPTH		0x00010000
+#define RISCV_KERNEL_MODE_V		0x00000001
+#define RISCV_PREEMPT_V			0x00000100
+#define RISCV_PREEMPT_V_DIRTY		0x80000000
+#define RISCV_PREEMPT_V_NEED_RESTORE	0x40000000
+
 /* CPU-specific state of a task */
 struct thread_struct {
 	/* Callee-saved registers */
@@ -81,9 +118,11 @@ struct thread_struct {
 	unsigned long s[12];	/* s[0]: frame pointer */
 	struct __riscv_d_ext_state fstate;
 	unsigned long bad_cause;
-	unsigned long vstate_ctrl;
+	u32 riscv_v_flags;
+	u32 vstate_ctrl;
 	struct __riscv_v_ext_state vstate;
 	unsigned long align_ctl;
+	struct __riscv_v_ext_state kernel_vstate;
 };
 
 /* Whitelist the fstate from the task_struct for hardened usercopy */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/sbi.h linux-libre-6.8-gnu/arch/riscv/include/asm/sbi.h
index 0892f4421bc4..6e68f8dff76b 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/sbi.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/sbi.h
@@ -29,8 +29,10 @@ enum sbi_ext_id {
 	SBI_EXT_RFENCE = 0x52464E43,
 	SBI_EXT_HSM = 0x48534D,
 	SBI_EXT_SRST = 0x53525354,
+	SBI_EXT_SUSP = 0x53555350,
 	SBI_EXT_PMU = 0x504D55,
 	SBI_EXT_DBCN = 0x4442434E,
+	SBI_EXT_STA = 0x535441,
 
 	/* Experimentals extensions must lie within this range */
 	SBI_EXT_EXPERIMENTAL_START = 0x08000000,
@@ -114,6 +116,14 @@ enum sbi_srst_reset_reason {
 	SBI_SRST_RESET_REASON_SYS_FAILURE,
 };
 
+enum sbi_ext_susp_fid {
+	SBI_EXT_SUSP_SYSTEM_SUSPEND = 0,
+};
+
+enum sbi_ext_susp_sleep_type {
+	SBI_SUSP_SLEEP_TYPE_SUSPEND_TO_RAM = 0,
+};
+
 enum sbi_ext_pmu_fid {
 	SBI_EXT_PMU_NUM_COUNTERS = 0,
 	SBI_EXT_PMU_COUNTER_GET_INFO,
@@ -243,6 +253,22 @@ enum sbi_ext_dbcn_fid {
 	SBI_EXT_DBCN_CONSOLE_WRITE_BYTE = 2,
 };
 
+/* SBI STA (steal-time accounting) extension */
+enum sbi_ext_sta_fid {
+	SBI_EXT_STA_STEAL_TIME_SET_SHMEM = 0,
+};
+
+struct sbi_sta_struct {
+	__le32 sequence;
+	__le32 flags;
+	__le64 steal;
+	u8 preempted;
+	u8 pad[47];
+} __packed;
+
+#define SBI_STA_SHMEM_DISABLE		-1
+
+/* SBI spec version fields */
 #define SBI_SPEC_VERSION_DEFAULT	0x1
 #define SBI_SPEC_VERSION_MAJOR_SHIFT	24
 #define SBI_SPEC_VERSION_MAJOR_MASK	0x7f
@@ -271,8 +297,13 @@ struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
 			unsigned long arg3, unsigned long arg4,
 			unsigned long arg5);
 
+#ifdef CONFIG_RISCV_SBI_V01
 void sbi_console_putchar(int ch);
 int sbi_console_getchar(void);
+#else
+static inline void sbi_console_putchar(int ch) { }
+static inline int sbi_console_getchar(void) { return -ENOENT; }
+#endif
 long sbi_get_mvendorid(void);
 long sbi_get_marchid(void);
 long sbi_get_mimpid(void);
@@ -329,6 +360,11 @@ static inline unsigned long sbi_mk_version(unsigned long major,
 }
 
 int sbi_err_map_linux_errno(int err);
+
+extern bool sbi_debug_console_available;
+int sbi_debug_console_write(const char *bytes, unsigned int num_bytes);
+int sbi_debug_console_read(char *bytes, unsigned int num_bytes);
+
 #else /* CONFIG_RISCV_SBI */
 static inline int sbi_remote_fence_i(const struct cpumask *cpu_mask) { return -1; }
 static inline void sbi_init(void) {}
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/sections.h linux-libre-6.8-gnu/arch/riscv/include/asm/sections.h
index 32336e8a17cb..a393d5035c54 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/sections.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/sections.h
@@ -13,6 +13,7 @@ extern char _start_kernel[];
 extern char __init_data_begin[], __init_data_end[];
 extern char __init_text_begin[], __init_text_end[];
 extern char __alt_start[], __alt_end[];
+extern char __exittext_begin[], __exittext_end[];
 
 static inline bool is_va_kernel_text(uintptr_t va)
 {
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/simd.h linux-libre-6.8-gnu/arch/riscv/include/asm/simd.h
new file mode 100644
index 000000000000..54efbf523d49
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/simd.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2017 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ * Copyright (C) 2023 SiFive
+ */
+
+#ifndef __ASM_SIMD_H
+#define __ASM_SIMD_H
+
+#include <linux/compiler.h>
+#include <linux/irqflags.h>
+#include <linux/percpu.h>
+#include <linux/preempt.h>
+#include <linux/types.h>
+#include <linux/thread_info.h>
+
+#include <asm/vector.h>
+
+#ifdef CONFIG_RISCV_ISA_V
+/*
+ * may_use_simd - whether it is allowable at this time to issue vector
+ *                instructions or access the vector register file
+ *
+ * Callers must not assume that the result remains true beyond the next
+ * preempt_enable() or return from softirq context.
+ */
+static __must_check inline bool may_use_simd(void)
+{
+	/*
+	 * RISCV_KERNEL_MODE_V is only set while preemption is disabled,
+	 * and is clear whenever preemption is enabled.
+	 */
+	if (in_hardirq() || in_nmi())
+		return false;
+
+	/*
+	 * Nesting is acheived in preempt_v by spreading the control for
+	 * preemptible and non-preemptible kernel-mode Vector into two fields.
+	 * Always try to match with prempt_v if kernel V-context exists. Then,
+	 * fallback to check non preempt_v if nesting happens, or if the config
+	 * is not set.
+	 */
+	if (IS_ENABLED(CONFIG_RISCV_ISA_V_PREEMPTIVE) && current->thread.kernel_vstate.datap) {
+		if (!riscv_preempt_v_started(current))
+			return true;
+	}
+	/*
+	 * Non-preemptible kernel-mode Vector temporarily disables bh. So we
+	 * must not return true on irq_disabled(). Otherwise we would fail the
+	 * lockdep check calling local_bh_enable()
+	 */
+	return !irqs_disabled() && !(riscv_v_flags() & RISCV_KERNEL_MODE_V);
+}
+
+#else /* ! CONFIG_RISCV_ISA_V */
+
+static __must_check inline bool may_use_simd(void)
+{
+	return false;
+}
+
+#endif /* ! CONFIG_RISCV_ISA_V */
+
+#endif
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/stacktrace.h linux-libre-6.8-gnu/arch/riscv/include/asm/stacktrace.h
index f7e8ef2418b9..b1495a7e06ce 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/stacktrace.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/stacktrace.h
@@ -21,4 +21,9 @@ static inline bool on_thread_stack(void)
 	return !(((unsigned long)(current->stack) ^ current_stack_pointer) & ~(THREAD_SIZE - 1));
 }
 
+
+#ifdef CONFIG_VMAP_STACK
+DECLARE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack);
+#endif /* CONFIG_VMAP_STACK */
+
 #endif /* _ASM_RISCV_STACKTRACE_H */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/suspend.h linux-libre-6.8-gnu/arch/riscv/include/asm/suspend.h
index 02f87867389a..491296a335d0 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/suspend.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/suspend.h
@@ -14,6 +14,7 @@ struct suspend_context {
 	struct pt_regs regs;
 	/* Saved and restored by high-level functions */
 	unsigned long scratch;
+	unsigned long envcfg;
 	unsigned long tvec;
 	unsigned long ie;
 #ifdef CONFIG_MMU
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/switch_to.h linux-libre-6.8-gnu/arch/riscv/include/asm/switch_to.h
index f90d8e42f3c7..7efdb0584d47 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/switch_to.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/switch_to.h
@@ -53,8 +53,7 @@ static inline void __switch_to_fpu(struct task_struct *prev,
 	struct pt_regs *regs;
 
 	regs = task_pt_regs(prev);
-	if (unlikely(regs->status & SR_SD))
-		fstate_save(prev, regs);
+	fstate_save(prev, regs);
 	fstate_restore(next, task_pt_regs(next));
 }
 
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/thread_info.h linux-libre-6.8-gnu/arch/riscv/include/asm/thread_info.h
index 574779900bfb..5d473343634b 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/thread_info.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/thread_info.h
@@ -28,7 +28,6 @@
 
 #define THREAD_SHIFT            (PAGE_SHIFT + THREAD_SIZE_ORDER)
 #define OVERFLOW_STACK_SIZE     SZ_4K
-#define SHADOW_OVERFLOW_STACK_SIZE (1024)
 
 #define IRQ_STACK_SIZE		THREAD_SIZE
 
@@ -103,12 +102,14 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
 #define TIF_NOTIFY_SIGNAL	9	/* signal notifications exist */
 #define TIF_UPROBE		10	/* uprobe breakpoint or singlestep */
 #define TIF_32BIT		11	/* compat-mode 32bit process */
+#define TIF_RISCV_V_DEFER_RESTORE	12 /* restore Vector before returing to user */
 
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
 #define _TIF_UPROBE		(1 << TIF_UPROBE)
+#define _TIF_RISCV_V_DEFER_RESTORE	(1 << TIF_RISCV_V_DEFER_RESTORE)
 
 #define _TIF_WORK_MASK \
 	(_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | _TIF_NEED_RESCHED | \
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/tlb.h linux-libre-6.8-gnu/arch/riscv/include/asm/tlb.h
index 1eb5682b2af6..50b63b5c15bd 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/tlb.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/tlb.h
@@ -16,7 +16,7 @@ static void tlb_flush(struct mmu_gather *tlb);
 static inline void tlb_flush(struct mmu_gather *tlb)
 {
 #ifdef CONFIG_MMU
-	if (tlb->fullmm || tlb->need_flush_all)
+	if (tlb->fullmm || tlb->need_flush_all || tlb->freed_tables)
 		flush_tlb_mm(tlb->mm);
 	else
 		flush_tlb_mm_range(tlb->mm, tlb->start, tlb->end,
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/tlbbatch.h linux-libre-6.8-gnu/arch/riscv/include/asm/tlbbatch.h
new file mode 100644
index 000000000000..46014f70b9da
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/tlbbatch.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 Rivos Inc.
+ */
+
+#ifndef _ASM_RISCV_TLBBATCH_H
+#define _ASM_RISCV_TLBBATCH_H
+
+#include <linux/cpumask.h>
+
+struct arch_tlbflush_unmap_batch {
+	struct cpumask cpumask;
+};
+
+#endif /* _ASM_RISCV_TLBBATCH_H */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/tlbflush.h linux-libre-6.8-gnu/arch/riscv/include/asm/tlbflush.h
index 8f3418c5f172..4112cc8d1d69 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/tlbflush.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/tlbflush.h
@@ -41,11 +41,20 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
 void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		     unsigned long end);
 void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end);
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
 void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			unsigned long end);
 #endif
+
+bool arch_tlbbatch_should_defer(struct mm_struct *mm);
+void arch_tlbbatch_add_pending(struct arch_tlbflush_unmap_batch *batch,
+			       struct mm_struct *mm,
+			       unsigned long uaddr);
+void arch_flush_tlb_batched_pending(struct mm_struct *mm);
+void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch);
+
 #else /* CONFIG_SMP && CONFIG_MMU */
 
 #define flush_tlb_all() local_flush_tlb_all()
@@ -66,6 +75,7 @@ static inline void flush_tlb_kernel_range(unsigned long start,
 
 #define flush_tlb_mm(mm) flush_tlb_all()
 #define flush_tlb_mm_range(mm, start, end, page_size) flush_tlb_all()
+#define local_flush_tlb_kernel_range(start, end) flush_tlb_all()
 #endif /* !CONFIG_SMP || !CONFIG_MMU */
 
 #endif /* _ASM_RISCV_TLBFLUSH_H */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/topology.h linux-libre-6.8-gnu/arch/riscv/include/asm/topology.h
index e316ab3b77f3..61183688bdd5 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/topology.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/topology.h
@@ -9,6 +9,7 @@
 #define arch_set_freq_scale		topology_set_freq_scale
 #define arch_scale_freq_capacity	topology_get_freq_scale
 #define arch_scale_freq_invariant	topology_scale_freq_invariant
+#define arch_scale_freq_ref		topology_get_freq_ref
 
 /* Replace task scheduler's default cpu-invariant accounting */
 #define arch_scale_cpu_capacity	topology_get_cpu_scale
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/vector.h linux-libre-6.8-gnu/arch/riscv/include/asm/vector.h
index 87aaef656257..0cd6f0a027d1 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/vector.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/vector.h
@@ -22,6 +22,18 @@
 extern unsigned long riscv_v_vsize;
 int riscv_v_setup_vsize(void);
 bool riscv_v_first_use_handler(struct pt_regs *regs);
+void kernel_vector_begin(void);
+void kernel_vector_end(void);
+void get_cpu_vector_context(void);
+void put_cpu_vector_context(void);
+void riscv_v_thread_free(struct task_struct *tsk);
+void __init riscv_v_setup_ctx_cache(void);
+void riscv_v_thread_alloc(struct task_struct *tsk);
+
+static inline u32 riscv_v_flags(void)
+{
+	return READ_ONCE(current->thread.riscv_v_flags);
+}
 
 static __always_inline bool has_vector(void)
 {
@@ -162,36 +174,89 @@ static inline void riscv_v_vstate_discard(struct pt_regs *regs)
 	__riscv_v_vstate_dirty(regs);
 }
 
-static inline void riscv_v_vstate_save(struct task_struct *task,
+static inline void riscv_v_vstate_save(struct __riscv_v_ext_state *vstate,
 				       struct pt_regs *regs)
 {
 	if ((regs->status & SR_VS) == SR_VS_DIRTY) {
-		struct __riscv_v_ext_state *vstate = &task->thread.vstate;
-
 		__riscv_v_vstate_save(vstate, vstate->datap);
 		__riscv_v_vstate_clean(regs);
 	}
 }
 
-static inline void riscv_v_vstate_restore(struct task_struct *task,
+static inline void riscv_v_vstate_restore(struct __riscv_v_ext_state *vstate,
 					  struct pt_regs *regs)
 {
 	if ((regs->status & SR_VS) != SR_VS_OFF) {
-		struct __riscv_v_ext_state *vstate = &task->thread.vstate;
-
 		__riscv_v_vstate_restore(vstate, vstate->datap);
 		__riscv_v_vstate_clean(regs);
 	}
 }
 
+static inline void riscv_v_vstate_set_restore(struct task_struct *task,
+					      struct pt_regs *regs)
+{
+	if ((regs->status & SR_VS) != SR_VS_OFF) {
+		set_tsk_thread_flag(task, TIF_RISCV_V_DEFER_RESTORE);
+		riscv_v_vstate_on(regs);
+	}
+}
+
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+static inline bool riscv_preempt_v_dirty(struct task_struct *task)
+{
+	return !!(task->thread.riscv_v_flags & RISCV_PREEMPT_V_DIRTY);
+}
+
+static inline bool riscv_preempt_v_restore(struct task_struct *task)
+{
+	return !!(task->thread.riscv_v_flags & RISCV_PREEMPT_V_NEED_RESTORE);
+}
+
+static inline void riscv_preempt_v_clear_dirty(struct task_struct *task)
+{
+	barrier();
+	task->thread.riscv_v_flags &= ~RISCV_PREEMPT_V_DIRTY;
+}
+
+static inline void riscv_preempt_v_set_restore(struct task_struct *task)
+{
+	barrier();
+	task->thread.riscv_v_flags |= RISCV_PREEMPT_V_NEED_RESTORE;
+}
+
+static inline bool riscv_preempt_v_started(struct task_struct *task)
+{
+	return !!(task->thread.riscv_v_flags & RISCV_PREEMPT_V);
+}
+
+#else /* !CONFIG_RISCV_ISA_V_PREEMPTIVE */
+static inline bool riscv_preempt_v_dirty(struct task_struct *task) { return false; }
+static inline bool riscv_preempt_v_restore(struct task_struct *task) { return false; }
+static inline bool riscv_preempt_v_started(struct task_struct *task) { return false; }
+#define riscv_preempt_v_clear_dirty(tsk)	do {} while (0)
+#define riscv_preempt_v_set_restore(tsk)	do {} while (0)
+#endif /* CONFIG_RISCV_ISA_V_PREEMPTIVE */
+
 static inline void __switch_to_vector(struct task_struct *prev,
 				      struct task_struct *next)
 {
 	struct pt_regs *regs;
 
-	regs = task_pt_regs(prev);
-	riscv_v_vstate_save(prev, regs);
-	riscv_v_vstate_restore(next, task_pt_regs(next));
+	if (riscv_preempt_v_started(prev)) {
+		if (riscv_preempt_v_dirty(prev)) {
+			__riscv_v_vstate_save(&prev->thread.kernel_vstate,
+					      prev->thread.kernel_vstate.datap);
+			riscv_preempt_v_clear_dirty(prev);
+		}
+	} else {
+		regs = task_pt_regs(prev);
+		riscv_v_vstate_save(&prev->thread.vstate, regs);
+	}
+
+	if (riscv_preempt_v_started(next))
+		riscv_preempt_v_set_restore(next);
+	else
+		riscv_v_vstate_set_restore(next, task_pt_regs(next));
 }
 
 void riscv_v_vstate_ctrl_init(struct task_struct *tsk);
@@ -208,11 +273,14 @@ static inline bool riscv_v_vstate_query(struct pt_regs *regs) { return false; }
 static inline bool riscv_v_vstate_ctrl_user_allowed(void) { return false; }
 #define riscv_v_vsize (0)
 #define riscv_v_vstate_discard(regs)		do {} while (0)
-#define riscv_v_vstate_save(task, regs)		do {} while (0)
-#define riscv_v_vstate_restore(task, regs)	do {} while (0)
+#define riscv_v_vstate_save(vstate, regs)	do {} while (0)
+#define riscv_v_vstate_restore(vstate, regs)	do {} while (0)
 #define __switch_to_vector(__prev, __next)	do {} while (0)
 #define riscv_v_vstate_off(regs)		do {} while (0)
 #define riscv_v_vstate_on(regs)			do {} while (0)
+#define riscv_v_thread_free(tsk)		do {} while (0)
+#define  riscv_v_setup_ctx_cache()		do {} while (0)
+#define riscv_v_thread_alloc(tsk)		do {} while (0)
 
 #endif /* CONFIG_RISCV_ISA_V */
 
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/vmalloc.h linux-libre-6.8-gnu/arch/riscv/include/asm/vmalloc.h
index 924d01b56c9a..51f6dfe19745 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/vmalloc.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/vmalloc.h
@@ -19,65 +19,6 @@ static inline bool arch_vmap_pmd_supported(pgprot_t prot)
 	return true;
 }
 
-#ifdef CONFIG_RISCV_ISA_SVNAPOT
-#include <linux/pgtable.h>
+#endif
 
-#define arch_vmap_pte_range_map_size arch_vmap_pte_range_map_size
-static inline unsigned long arch_vmap_pte_range_map_size(unsigned long addr, unsigned long end,
-							 u64 pfn, unsigned int max_page_shift)
-{
-	unsigned long map_size = PAGE_SIZE;
-	unsigned long size, order;
-
-	if (!has_svnapot())
-		return map_size;
-
-	for_each_napot_order_rev(order) {
-		if (napot_cont_shift(order) > max_page_shift)
-			continue;
-
-		size = napot_cont_size(order);
-		if (end - addr < size)
-			continue;
-
-		if (!IS_ALIGNED(addr, size))
-			continue;
-
-		if (!IS_ALIGNED(PFN_PHYS(pfn), size))
-			continue;
-
-		map_size = size;
-		break;
-	}
-
-	return map_size;
-}
-
-#define arch_vmap_pte_supported_shift arch_vmap_pte_supported_shift
-static inline int arch_vmap_pte_supported_shift(unsigned long size)
-{
-	int shift = PAGE_SHIFT;
-	unsigned long order;
-
-	if (!has_svnapot())
-		return shift;
-
-	WARN_ON_ONCE(size >= PMD_SIZE);
-
-	for_each_napot_order_rev(order) {
-		if (napot_cont_size(order) > size)
-			continue;
-
-		if (!IS_ALIGNED(size, napot_cont_size(order)))
-			continue;
-
-		shift = napot_cont_shift(order);
-		break;
-	}
-
-	return shift;
-}
-
-#endif /* CONFIG_RISCV_ISA_SVNAPOT */
-#endif /* CONFIG_HAVE_ARCH_HUGE_VMAP */
 #endif /* _ASM_RISCV_VMALLOC_H */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/word-at-a-time.h linux-libre-6.8-gnu/arch/riscv/include/asm/word-at-a-time.h
index 7c086ac6ecd4..f3f031e34191 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/word-at-a-time.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/word-at-a-time.h
@@ -9,6 +9,7 @@
 #define _ASM_RISCV_WORD_AT_A_TIME_H
 
 
+#include <asm/asm-extable.h>
 #include <linux/kernel.h>
 
 struct word_at_a_time {
@@ -45,4 +46,30 @@ static inline unsigned long find_zero(unsigned long mask)
 /* The mask we created is directly usable as a bytemask */
 #define zero_bytemask(mask) (mask)
 
+#ifdef CONFIG_DCACHE_WORD_ACCESS
+
+/*
+ * Load an unaligned word from kernel space.
+ *
+ * In the (very unlikely) case of the word being a page-crosser
+ * and the next page not being mapped, take the exception and
+ * return zeroes in the non-existing part.
+ */
+static inline unsigned long load_unaligned_zeropad(const void *addr)
+{
+	unsigned long ret;
+
+	/* Load word from unaligned pointer addr */
+	asm(
+	"1:	" REG_L " %0, %2\n"
+	"2:\n"
+	_ASM_EXTABLE_LOAD_UNALIGNED_ZEROPAD(1b, 2b, %0, %1)
+	: "=&r" (ret)
+	: "r" (addr), "m" (*(unsigned long *)addr));
+
+	return ret;
+}
+
+#endif	/* CONFIG_DCACHE_WORD_ACCESS */
+
 #endif /* _ASM_RISCV_WORD_AT_A_TIME_H */
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/xip_fixup.h linux-libre-6.8-gnu/arch/riscv/include/asm/xip_fixup.h
index d4ffc3c37649..b65bf6306f69 100644
--- linux-libre-6.7-gnu/arch/riscv/include/asm/xip_fixup.h
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/xip_fixup.h
@@ -13,7 +13,7 @@
         add \reg, \reg, t0
 .endm
 .macro XIP_FIXUP_FLASH_OFFSET reg
-	la t1, __data_loc
+	la t0, __data_loc
 	REG_L t1, _xip_phys_offset
 	sub \reg, \reg, t1
 	add \reg, \reg, t0
diff --git linux-libre-6.7-gnu/arch/riscv/include/asm/xor.h linux-libre-6.8-gnu/arch/riscv/include/asm/xor.h
new file mode 100644
index 000000000000..96011861e46b
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/include/asm/xor.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2021 SiFive
+ */
+
+#include <linux/hardirq.h>
+#include <asm-generic/xor.h>
+#ifdef CONFIG_RISCV_ISA_V
+#include <asm/vector.h>
+#include <asm/switch_to.h>
+#include <asm/asm-prototypes.h>
+
+static void xor_vector_2(unsigned long bytes, unsigned long *__restrict p1,
+			 const unsigned long *__restrict p2)
+{
+	kernel_vector_begin();
+	xor_regs_2_(bytes, p1, p2);
+	kernel_vector_end();
+}
+
+static void xor_vector_3(unsigned long bytes, unsigned long *__restrict p1,
+			 const unsigned long *__restrict p2,
+			 const unsigned long *__restrict p3)
+{
+	kernel_vector_begin();
+	xor_regs_3_(bytes, p1, p2, p3);
+	kernel_vector_end();
+}
+
+static void xor_vector_4(unsigned long bytes, unsigned long *__restrict p1,
+			 const unsigned long *__restrict p2,
+			 const unsigned long *__restrict p3,
+			 const unsigned long *__restrict p4)
+{
+	kernel_vector_begin();
+	xor_regs_4_(bytes, p1, p2, p3, p4);
+	kernel_vector_end();
+}
+
+static void xor_vector_5(unsigned long bytes, unsigned long *__restrict p1,
+			 const unsigned long *__restrict p2,
+			 const unsigned long *__restrict p3,
+			 const unsigned long *__restrict p4,
+			 const unsigned long *__restrict p5)
+{
+	kernel_vector_begin();
+	xor_regs_5_(bytes, p1, p2, p3, p4, p5);
+	kernel_vector_end();
+}
+
+static struct xor_block_template xor_block_rvv = {
+	.name = "rvv",
+	.do_2 = xor_vector_2,
+	.do_3 = xor_vector_3,
+	.do_4 = xor_vector_4,
+	.do_5 = xor_vector_5
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES           \
+	do {        \
+		xor_speed(&xor_block_8regs);    \
+		xor_speed(&xor_block_32regs);    \
+		if (has_vector()) { \
+			xor_speed(&xor_block_rvv);\
+		} \
+	} while (0)
+#endif
diff --git linux-libre-6.7-gnu/arch/riscv/include/uapi/asm/hwprobe.h linux-libre-6.8-gnu/arch/riscv/include/uapi/asm/hwprobe.h
index b659ffcfcdb4..9f2a8e3ff204 100644
--- linux-libre-6.7-gnu/arch/riscv/include/uapi/asm/hwprobe.h
+++ linux-libre-6.8-gnu/arch/riscv/include/uapi/asm/hwprobe.h
@@ -30,6 +30,35 @@ struct riscv_hwprobe {
 #define		RISCV_HWPROBE_EXT_ZBB		(1 << 4)
 #define		RISCV_HWPROBE_EXT_ZBS		(1 << 5)
 #define		RISCV_HWPROBE_EXT_ZICBOZ	(1 << 6)
+#define		RISCV_HWPROBE_EXT_ZBC		(1 << 7)
+#define		RISCV_HWPROBE_EXT_ZBKB		(1 << 8)
+#define		RISCV_HWPROBE_EXT_ZBKC		(1 << 9)
+#define		RISCV_HWPROBE_EXT_ZBKX		(1 << 10)
+#define		RISCV_HWPROBE_EXT_ZKND		(1 << 11)
+#define		RISCV_HWPROBE_EXT_ZKNE		(1 << 12)
+#define		RISCV_HWPROBE_EXT_ZKNH		(1 << 13)
+#define		RISCV_HWPROBE_EXT_ZKSED		(1 << 14)
+#define		RISCV_HWPROBE_EXT_ZKSH		(1 << 15)
+#define		RISCV_HWPROBE_EXT_ZKT		(1 << 16)
+#define		RISCV_HWPROBE_EXT_ZVBB		(1 << 17)
+#define		RISCV_HWPROBE_EXT_ZVBC		(1 << 18)
+#define		RISCV_HWPROBE_EXT_ZVKB		(1 << 19)
+#define		RISCV_HWPROBE_EXT_ZVKG		(1 << 20)
+#define		RISCV_HWPROBE_EXT_ZVKNED	(1 << 21)
+#define		RISCV_HWPROBE_EXT_ZVKNHA	(1 << 22)
+#define		RISCV_HWPROBE_EXT_ZVKNHB	(1 << 23)
+#define		RISCV_HWPROBE_EXT_ZVKSED	(1 << 24)
+#define		RISCV_HWPROBE_EXT_ZVKSH		(1 << 25)
+#define		RISCV_HWPROBE_EXT_ZVKT		(1 << 26)
+#define		RISCV_HWPROBE_EXT_ZFH		(1 << 27)
+#define		RISCV_HWPROBE_EXT_ZFHMIN	(1 << 28)
+#define		RISCV_HWPROBE_EXT_ZIHINTNTL	(1 << 29)
+#define		RISCV_HWPROBE_EXT_ZVFH		(1 << 30)
+#define		RISCV_HWPROBE_EXT_ZVFHMIN	(1 << 31)
+#define		RISCV_HWPROBE_EXT_ZFA		(1ULL << 32)
+#define		RISCV_HWPROBE_EXT_ZTSO		(1ULL << 33)
+#define		RISCV_HWPROBE_EXT_ZACAS		(1ULL << 34)
+#define		RISCV_HWPROBE_EXT_ZICOND	(1ULL << 35)
 #define RISCV_HWPROBE_KEY_CPUPERF_0	5
 #define		RISCV_HWPROBE_MISALIGNED_UNKNOWN	(0 << 0)
 #define		RISCV_HWPROBE_MISALIGNED_EMULATED	(1 << 0)
@@ -40,4 +69,7 @@ struct riscv_hwprobe {
 #define RISCV_HWPROBE_KEY_ZICBOZ_BLOCK_SIZE	6
 /* Increase RISCV_HWPROBE_MAX_KEY when adding items. */
 
+/* Flags */
+#define RISCV_HWPROBE_WHICH_CPUS	(1 << 0)
+
 #endif
diff --git linux-libre-6.7-gnu/arch/riscv/include/uapi/asm/kvm.h linux-libre-6.8-gnu/arch/riscv/include/uapi/asm/kvm.h
index 60d3b21dead7..7499e88a947c 100644
--- linux-libre-6.7-gnu/arch/riscv/include/uapi/asm/kvm.h
+++ linux-libre-6.8-gnu/arch/riscv/include/uapi/asm/kvm.h
@@ -139,6 +139,33 @@ enum KVM_RISCV_ISA_EXT_ID {
 	KVM_RISCV_ISA_EXT_ZIHPM,
 	KVM_RISCV_ISA_EXT_SMSTATEEN,
 	KVM_RISCV_ISA_EXT_ZICOND,
+	KVM_RISCV_ISA_EXT_ZBC,
+	KVM_RISCV_ISA_EXT_ZBKB,
+	KVM_RISCV_ISA_EXT_ZBKC,
+	KVM_RISCV_ISA_EXT_ZBKX,
+	KVM_RISCV_ISA_EXT_ZKND,
+	KVM_RISCV_ISA_EXT_ZKNE,
+	KVM_RISCV_ISA_EXT_ZKNH,
+	KVM_RISCV_ISA_EXT_ZKR,
+	KVM_RISCV_ISA_EXT_ZKSED,
+	KVM_RISCV_ISA_EXT_ZKSH,
+	KVM_RISCV_ISA_EXT_ZKT,
+	KVM_RISCV_ISA_EXT_ZVBB,
+	KVM_RISCV_ISA_EXT_ZVBC,
+	KVM_RISCV_ISA_EXT_ZVKB,
+	KVM_RISCV_ISA_EXT_ZVKG,
+	KVM_RISCV_ISA_EXT_ZVKNED,
+	KVM_RISCV_ISA_EXT_ZVKNHA,
+	KVM_RISCV_ISA_EXT_ZVKNHB,
+	KVM_RISCV_ISA_EXT_ZVKSED,
+	KVM_RISCV_ISA_EXT_ZVKSH,
+	KVM_RISCV_ISA_EXT_ZVKT,
+	KVM_RISCV_ISA_EXT_ZFH,
+	KVM_RISCV_ISA_EXT_ZFHMIN,
+	KVM_RISCV_ISA_EXT_ZIHINTNTL,
+	KVM_RISCV_ISA_EXT_ZVFH,
+	KVM_RISCV_ISA_EXT_ZVFHMIN,
+	KVM_RISCV_ISA_EXT_ZFA,
 	KVM_RISCV_ISA_EXT_MAX,
 };
 
@@ -157,9 +184,16 @@ enum KVM_RISCV_SBI_EXT_ID {
 	KVM_RISCV_SBI_EXT_EXPERIMENTAL,
 	KVM_RISCV_SBI_EXT_VENDOR,
 	KVM_RISCV_SBI_EXT_DBCN,
+	KVM_RISCV_SBI_EXT_STA,
 	KVM_RISCV_SBI_EXT_MAX,
 };
 
+/* SBI STA extension registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */
+struct kvm_riscv_sbi_sta {
+	unsigned long shmem_lo;
+	unsigned long shmem_hi;
+};
+
 /* Possible states for kvm_riscv_timer */
 #define KVM_RISCV_TIMER_STATE_OFF	0
 #define KVM_RISCV_TIMER_STATE_ON	1
@@ -241,6 +275,12 @@ enum KVM_RISCV_SBI_EXT_ID {
 #define KVM_REG_RISCV_VECTOR_REG(n)	\
 		((n) + sizeof(struct __riscv_v_ext_state) / sizeof(unsigned long))
 
+/* Registers for specific SBI extensions are mapped as type 10 */
+#define KVM_REG_RISCV_SBI_STATE		(0x0a << KVM_REG_RISCV_TYPE_SHIFT)
+#define KVM_REG_RISCV_SBI_STA		(0x0 << KVM_REG_RISCV_SUBTYPE_SHIFT)
+#define KVM_REG_RISCV_SBI_STA_REG(name)		\
+		(offsetof(struct kvm_riscv_sbi_sta, name) / sizeof(unsigned long))
+
 /* Device Control API: RISC-V AIA */
 #define KVM_DEV_RISCV_APLIC_ALIGN		0x1000
 #define KVM_DEV_RISCV_APLIC_SIZE		0x4000
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/Makefile linux-libre-6.8-gnu/arch/riscv/kernel/Makefile
index fee22a3d1b53..604d6bf7e476 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/Makefile
+++ linux-libre-6.8-gnu/arch/riscv/kernel/Makefile
@@ -7,11 +7,12 @@ ifdef CONFIG_FTRACE
 CFLAGS_REMOVE_ftrace.o	= $(CC_FLAGS_FTRACE)
 CFLAGS_REMOVE_patch.o	= $(CC_FLAGS_FTRACE)
 CFLAGS_REMOVE_sbi.o	= $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_return_address.o	= $(CC_FLAGS_FTRACE)
 endif
 CFLAGS_syscall_table.o	+= $(call cc-option,-Wno-override-init,)
 CFLAGS_compat_syscall_table.o += $(call cc-option,-Wno-override-init,)
 
-ifdef CONFIG_KEXEC
+ifdef CONFIG_KEXEC_CORE
 AFLAGS_kexec_relocate.o := -mcmodel=medany $(call cc-option,-mno-relax)
 endif
 
@@ -46,10 +47,12 @@ obj-y	+= irq.o
 obj-y	+= process.o
 obj-y	+= ptrace.o
 obj-y	+= reset.o
+obj-y	+= return_address.o
 obj-y	+= setup.o
 obj-y	+= signal.o
 obj-y	+= syscall_table.o
 obj-y	+= sys_riscv.o
+obj-y	+= sys_hwprobe.o
 obj-y	+= time.o
 obj-y	+= traps.o
 obj-y	+= riscv_ksyms.o
@@ -63,6 +66,7 @@ obj-$(CONFIG_MMU) += vdso.o vdso/
 obj-$(CONFIG_RISCV_MISALIGNED)	+= traps_misaligned.o
 obj-$(CONFIG_FPU)		+= fpu.o
 obj-$(CONFIG_RISCV_ISA_V)	+= vector.o
+obj-$(CONFIG_RISCV_ISA_V)	+= kernel_mode_vector.o
 obj-$(CONFIG_SMP)		+= smpboot.o
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SMP)		+= cpu_ops.o
@@ -85,6 +89,7 @@ obj-$(CONFIG_SMP)		+= sbi-ipi.o
 obj-$(CONFIG_SMP) += cpu_ops_sbi.o
 endif
 obj-$(CONFIG_HOTPLUG_CPU)	+= cpu-hotplug.o
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_KEXEC_CORE)	+= kexec_relocate.o crash_save_regs.o machine_kexec.o
 obj-$(CONFIG_KEXEC_FILE)	+= elf_kexec.o machine_kexec_file.o
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/cfi.c linux-libre-6.8-gnu/arch/riscv/kernel/cfi.c
index 820158d7a291..6ec9dbd7292e 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/cfi.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/cfi.c
@@ -4,7 +4,7 @@
  *
  * Copyright (C) 2023 Google LLC
  */
-#include <asm/cfi.h>
+#include <linux/cfi.h>
 #include <asm/insn.h>
 
 /*
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/cpu-hotplug.c linux-libre-6.8-gnu/arch/riscv/kernel/cpu-hotplug.c
index 457a18efcb11..28b58fc5ad19 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/cpu-hotplug.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/cpu-hotplug.c
@@ -18,7 +18,7 @@
 
 bool cpu_has_hotplug(unsigned int cpu)
 {
-	if (cpu_ops[cpu]->cpu_stop)
+	if (cpu_ops->cpu_stop)
 		return true;
 
 	return false;
@@ -29,25 +29,18 @@ bool cpu_has_hotplug(unsigned int cpu)
  */
 int __cpu_disable(void)
 {
-	int ret = 0;
 	unsigned int cpu = smp_processor_id();
 
-	if (!cpu_ops[cpu] || !cpu_ops[cpu]->cpu_stop)
+	if (!cpu_ops->cpu_stop)
 		return -EOPNOTSUPP;
 
-	if (cpu_ops[cpu]->cpu_disable)
-		ret = cpu_ops[cpu]->cpu_disable(cpu);
-
-	if (ret)
-		return ret;
-
 	remove_cpu_topology(cpu);
 	numa_remove_cpu(cpu);
 	set_cpu_online(cpu, false);
 	riscv_ipi_disable();
 	irq_migrate_all_off_this_cpu();
 
-	return ret;
+	return 0;
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -62,8 +55,8 @@ void arch_cpuhp_cleanup_dead_cpu(unsigned int cpu)
 	pr_notice("CPU%u: off\n", cpu);
 
 	/* Verify from the firmware if the cpu is really stopped*/
-	if (cpu_ops[cpu]->cpu_is_stopped)
-		ret = cpu_ops[cpu]->cpu_is_stopped(cpu);
+	if (cpu_ops->cpu_is_stopped)
+		ret = cpu_ops->cpu_is_stopped(cpu);
 	if (ret)
 		pr_warn("CPU%d may not have stopped: %d\n", cpu, ret);
 }
@@ -77,7 +70,7 @@ void __noreturn arch_cpu_idle_dead(void)
 
 	cpuhp_ap_report_dead();
 
-	cpu_ops[smp_processor_id()]->cpu_stop();
+	cpu_ops->cpu_stop();
 	/* It should never reach here */
 	BUG();
 }
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/cpu_ops.c linux-libre-6.8-gnu/arch/riscv/kernel/cpu_ops.c
index eb479a88a954..6a8bd8f4db07 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/cpu_ops.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/cpu_ops.c
@@ -13,25 +13,21 @@
 #include <asm/sbi.h>
 #include <asm/smp.h>
 
-const struct cpu_operations *cpu_ops[NR_CPUS] __ro_after_init;
+const struct cpu_operations *cpu_ops __ro_after_init = &cpu_ops_spinwait;
 
 extern const struct cpu_operations cpu_ops_sbi;
 #ifndef CONFIG_RISCV_BOOT_SPINWAIT
 const struct cpu_operations cpu_ops_spinwait = {
-	.name		= "",
-	.cpu_prepare	= NULL,
 	.cpu_start	= NULL,
 };
 #endif
 
-void __init cpu_set_ops(int cpuid)
+void __init cpu_set_ops(void)
 {
 #if IS_ENABLED(CONFIG_RISCV_SBI)
 	if (sbi_probe_extension(SBI_EXT_HSM)) {
-		if (!cpuid)
-			pr_info("SBI HSM extension detected\n");
-		cpu_ops[cpuid] = &cpu_ops_sbi;
-	} else
+		pr_info("SBI HSM extension detected\n");
+		cpu_ops = &cpu_ops_sbi;
+	}
 #endif
-		cpu_ops[cpuid] = &cpu_ops_spinwait;
 }
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/cpu_ops_sbi.c linux-libre-6.8-gnu/arch/riscv/kernel/cpu_ops_sbi.c
index efa0f0816634..1cc7df740edd 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/cpu_ops_sbi.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/cpu_ops_sbi.c
@@ -79,23 +79,7 @@ static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
 	return sbi_hsm_hart_start(hartid, boot_addr, hsm_data);
 }
 
-static int sbi_cpu_prepare(unsigned int cpuid)
-{
-	if (!cpu_ops_sbi.cpu_start) {
-		pr_err("cpu start method not defined for CPU [%d]\n", cpuid);
-		return -ENODEV;
-	}
-	return 0;
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
-static int sbi_cpu_disable(unsigned int cpuid)
-{
-	if (!cpu_ops_sbi.cpu_stop)
-		return -EOPNOTSUPP;
-	return 0;
-}
-
 static void sbi_cpu_stop(void)
 {
 	int ret;
@@ -118,11 +102,8 @@ static int sbi_cpu_is_stopped(unsigned int cpuid)
 #endif
 
 const struct cpu_operations cpu_ops_sbi = {
-	.name		= "sbi",
-	.cpu_prepare	= sbi_cpu_prepare,
 	.cpu_start	= sbi_cpu_start,
 #ifdef CONFIG_HOTPLUG_CPU
-	.cpu_disable	= sbi_cpu_disable,
 	.cpu_stop	= sbi_cpu_stop,
 	.cpu_is_stopped	= sbi_cpu_is_stopped,
 #endif
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/cpu_ops_spinwait.c linux-libre-6.8-gnu/arch/riscv/kernel/cpu_ops_spinwait.c
index d98d19226b5f..613872b0a21a 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/cpu_ops_spinwait.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/cpu_ops_spinwait.c
@@ -39,15 +39,6 @@ static void cpu_update_secondary_bootdata(unsigned int cpuid,
 	WRITE_ONCE(__cpu_spinwait_task_pointer[hartid], tidle);
 }
 
-static int spinwait_cpu_prepare(unsigned int cpuid)
-{
-	if (!cpu_ops_spinwait.cpu_start) {
-		pr_err("cpu start method not defined for CPU [%d]\n", cpuid);
-		return -ENODEV;
-	}
-	return 0;
-}
-
 static int spinwait_cpu_start(unsigned int cpuid, struct task_struct *tidle)
 {
 	/*
@@ -64,7 +55,5 @@ static int spinwait_cpu_start(unsigned int cpuid, struct task_struct *tidle)
 }
 
 const struct cpu_operations cpu_ops_spinwait = {
-	.name		= "spinwait",
-	.cpu_prepare	= spinwait_cpu_prepare,
 	.cpu_start	= spinwait_cpu_start,
 };
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/cpufeature.c linux-libre-6.8-gnu/arch/riscv/kernel/cpufeature.c
index b3785ffc1570..79a5a35fab96 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/cpufeature.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/cpufeature.c
@@ -8,8 +8,10 @@
 
 #include <linux/acpi.h>
 #include <linux/bitmap.h>
+#include <linux/cpu.h>
 #include <linux/cpuhotplug.h>
 #include <linux/ctype.h>
+#include <linux/jump_label.h>
 #include <linux/log2.h>
 #include <linux/memory.h>
 #include <linux/module.h>
@@ -22,6 +24,7 @@
 #include <asm/hwprobe.h>
 #include <asm/patch.h>
 #include <asm/processor.h>
+#include <asm/sbi.h>
 #include <asm/vector.h>
 
 #include "copy-unaligned.h"
@@ -44,6 +47,8 @@ struct riscv_isainfo hart_isa[NR_CPUS];
 /* Performance information */
 DEFINE_PER_CPU(long, misaligned_access_speed);
 
+static cpumask_t fast_misaligned_access;
+
 /**
  * riscv_isa_extension_base() - Get base extension word
  *
@@ -70,7 +75,7 @@ EXPORT_SYMBOL_GPL(riscv_isa_extension_base);
  *
  * NOTE: If isa_bitmap is NULL then Host ISA bitmap will be used.
  */
-bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, int bit)
+bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, unsigned int bit)
 {
 	const unsigned long *bmap = (isa_bitmap) ? isa_bitmap : riscv_isa;
 
@@ -102,17 +107,111 @@ static bool riscv_isa_extension_check(int id)
 			return false;
 		}
 		return true;
+	case RISCV_ISA_EXT_INVALID:
+		return false;
 	}
 
 	return true;
 }
 
-#define __RISCV_ISA_EXT_DATA(_name, _id) {	\
-	.name = #_name,				\
-	.property = #_name,			\
-	.id = _id,				\
+#define _RISCV_ISA_EXT_DATA(_name, _id, _subset_exts, _subset_exts_size) {	\
+	.name = #_name,								\
+	.property = #_name,							\
+	.id = _id,								\
+	.subset_ext_ids = _subset_exts,						\
+	.subset_ext_size = _subset_exts_size					\
 }
 
+#define __RISCV_ISA_EXT_DATA(_name, _id) _RISCV_ISA_EXT_DATA(_name, _id, NULL, 0)
+
+/* Used to declare pure "lasso" extension (Zk for instance) */
+#define __RISCV_ISA_EXT_BUNDLE(_name, _bundled_exts) \
+	_RISCV_ISA_EXT_DATA(_name, RISCV_ISA_EXT_INVALID, _bundled_exts, ARRAY_SIZE(_bundled_exts))
+
+/* Used to declare extensions that are a superset of other extensions (Zvbb for instance) */
+#define __RISCV_ISA_EXT_SUPERSET(_name, _id, _sub_exts) \
+	_RISCV_ISA_EXT_DATA(_name, _id, _sub_exts, ARRAY_SIZE(_sub_exts))
+
+static const unsigned int riscv_zk_bundled_exts[] = {
+	RISCV_ISA_EXT_ZBKB,
+	RISCV_ISA_EXT_ZBKC,
+	RISCV_ISA_EXT_ZBKX,
+	RISCV_ISA_EXT_ZKND,
+	RISCV_ISA_EXT_ZKNE,
+	RISCV_ISA_EXT_ZKR,
+	RISCV_ISA_EXT_ZKT,
+};
+
+static const unsigned int riscv_zkn_bundled_exts[] = {
+	RISCV_ISA_EXT_ZBKB,
+	RISCV_ISA_EXT_ZBKC,
+	RISCV_ISA_EXT_ZBKX,
+	RISCV_ISA_EXT_ZKND,
+	RISCV_ISA_EXT_ZKNE,
+	RISCV_ISA_EXT_ZKNH,
+};
+
+static const unsigned int riscv_zks_bundled_exts[] = {
+	RISCV_ISA_EXT_ZBKB,
+	RISCV_ISA_EXT_ZBKC,
+	RISCV_ISA_EXT_ZKSED,
+	RISCV_ISA_EXT_ZKSH
+};
+
+#define RISCV_ISA_EXT_ZVKN	\
+	RISCV_ISA_EXT_ZVKNED,	\
+	RISCV_ISA_EXT_ZVKNHB,	\
+	RISCV_ISA_EXT_ZVKB,	\
+	RISCV_ISA_EXT_ZVKT
+
+static const unsigned int riscv_zvkn_bundled_exts[] = {
+	RISCV_ISA_EXT_ZVKN
+};
+
+static const unsigned int riscv_zvknc_bundled_exts[] = {
+	RISCV_ISA_EXT_ZVKN,
+	RISCV_ISA_EXT_ZVBC
+};
+
+static const unsigned int riscv_zvkng_bundled_exts[] = {
+	RISCV_ISA_EXT_ZVKN,
+	RISCV_ISA_EXT_ZVKG
+};
+
+#define RISCV_ISA_EXT_ZVKS	\
+	RISCV_ISA_EXT_ZVKSED,	\
+	RISCV_ISA_EXT_ZVKSH,	\
+	RISCV_ISA_EXT_ZVKB,	\
+	RISCV_ISA_EXT_ZVKT
+
+static const unsigned int riscv_zvks_bundled_exts[] = {
+	RISCV_ISA_EXT_ZVKS
+};
+
+static const unsigned int riscv_zvksc_bundled_exts[] = {
+	RISCV_ISA_EXT_ZVKS,
+	RISCV_ISA_EXT_ZVBC
+};
+
+static const unsigned int riscv_zvksg_bundled_exts[] = {
+	RISCV_ISA_EXT_ZVKS,
+	RISCV_ISA_EXT_ZVKG
+};
+
+static const unsigned int riscv_zvbb_exts[] = {
+	RISCV_ISA_EXT_ZVKB
+};
+
+/*
+ * While the [ms]envcfg CSRs were not defined until version 1.12 of the RISC-V
+ * privileged ISA, the existence of the CSRs is implied by any extension which
+ * specifies [ms]envcfg bit(s). Hence, we define a custom ISA extension for the
+ * existence of the CSR, and treat it as a subset of those other extensions.
+ */
+static const unsigned int riscv_xlinuxenvcfg_exts[] = {
+	RISCV_ISA_EXT_XLINUXENVCFG
+};
+
 /*
  * The canonical order of ISA extension names in the ISA string is defined in
  * chapter 27 of the unprivileged specification.
@@ -160,23 +259,57 @@ const struct riscv_isa_ext_data riscv_isa_ext[] = {
 	__RISCV_ISA_EXT_DATA(d, RISCV_ISA_EXT_d),
 	__RISCV_ISA_EXT_DATA(q, RISCV_ISA_EXT_q),
 	__RISCV_ISA_EXT_DATA(c, RISCV_ISA_EXT_c),
-	__RISCV_ISA_EXT_DATA(b, RISCV_ISA_EXT_b),
-	__RISCV_ISA_EXT_DATA(k, RISCV_ISA_EXT_k),
-	__RISCV_ISA_EXT_DATA(j, RISCV_ISA_EXT_j),
-	__RISCV_ISA_EXT_DATA(p, RISCV_ISA_EXT_p),
 	__RISCV_ISA_EXT_DATA(v, RISCV_ISA_EXT_v),
 	__RISCV_ISA_EXT_DATA(h, RISCV_ISA_EXT_h),
-	__RISCV_ISA_EXT_DATA(zicbom, RISCV_ISA_EXT_ZICBOM),
-	__RISCV_ISA_EXT_DATA(zicboz, RISCV_ISA_EXT_ZICBOZ),
+	__RISCV_ISA_EXT_SUPERSET(zicbom, RISCV_ISA_EXT_ZICBOM, riscv_xlinuxenvcfg_exts),
+	__RISCV_ISA_EXT_SUPERSET(zicboz, RISCV_ISA_EXT_ZICBOZ, riscv_xlinuxenvcfg_exts),
 	__RISCV_ISA_EXT_DATA(zicntr, RISCV_ISA_EXT_ZICNTR),
 	__RISCV_ISA_EXT_DATA(zicond, RISCV_ISA_EXT_ZICOND),
 	__RISCV_ISA_EXT_DATA(zicsr, RISCV_ISA_EXT_ZICSR),
 	__RISCV_ISA_EXT_DATA(zifencei, RISCV_ISA_EXT_ZIFENCEI),
+	__RISCV_ISA_EXT_DATA(zihintntl, RISCV_ISA_EXT_ZIHINTNTL),
 	__RISCV_ISA_EXT_DATA(zihintpause, RISCV_ISA_EXT_ZIHINTPAUSE),
 	__RISCV_ISA_EXT_DATA(zihpm, RISCV_ISA_EXT_ZIHPM),
+	__RISCV_ISA_EXT_DATA(zacas, RISCV_ISA_EXT_ZACAS),
+	__RISCV_ISA_EXT_DATA(zfa, RISCV_ISA_EXT_ZFA),
+	__RISCV_ISA_EXT_DATA(zfh, RISCV_ISA_EXT_ZFH),
+	__RISCV_ISA_EXT_DATA(zfhmin, RISCV_ISA_EXT_ZFHMIN),
 	__RISCV_ISA_EXT_DATA(zba, RISCV_ISA_EXT_ZBA),
 	__RISCV_ISA_EXT_DATA(zbb, RISCV_ISA_EXT_ZBB),
+	__RISCV_ISA_EXT_DATA(zbc, RISCV_ISA_EXT_ZBC),
+	__RISCV_ISA_EXT_DATA(zbkb, RISCV_ISA_EXT_ZBKB),
+	__RISCV_ISA_EXT_DATA(zbkc, RISCV_ISA_EXT_ZBKC),
+	__RISCV_ISA_EXT_DATA(zbkx, RISCV_ISA_EXT_ZBKX),
 	__RISCV_ISA_EXT_DATA(zbs, RISCV_ISA_EXT_ZBS),
+	__RISCV_ISA_EXT_BUNDLE(zk, riscv_zk_bundled_exts),
+	__RISCV_ISA_EXT_BUNDLE(zkn, riscv_zkn_bundled_exts),
+	__RISCV_ISA_EXT_DATA(zknd, RISCV_ISA_EXT_ZKND),
+	__RISCV_ISA_EXT_DATA(zkne, RISCV_ISA_EXT_ZKNE),
+	__RISCV_ISA_EXT_DATA(zknh, RISCV_ISA_EXT_ZKNH),
+	__RISCV_ISA_EXT_DATA(zkr, RISCV_ISA_EXT_ZKR),
+	__RISCV_ISA_EXT_BUNDLE(zks, riscv_zks_bundled_exts),
+	__RISCV_ISA_EXT_DATA(zkt, RISCV_ISA_EXT_ZKT),
+	__RISCV_ISA_EXT_DATA(zksed, RISCV_ISA_EXT_ZKSED),
+	__RISCV_ISA_EXT_DATA(zksh, RISCV_ISA_EXT_ZKSH),
+	__RISCV_ISA_EXT_DATA(ztso, RISCV_ISA_EXT_ZTSO),
+	__RISCV_ISA_EXT_SUPERSET(zvbb, RISCV_ISA_EXT_ZVBB, riscv_zvbb_exts),
+	__RISCV_ISA_EXT_DATA(zvbc, RISCV_ISA_EXT_ZVBC),
+	__RISCV_ISA_EXT_DATA(zvfh, RISCV_ISA_EXT_ZVFH),
+	__RISCV_ISA_EXT_DATA(zvfhmin, RISCV_ISA_EXT_ZVFHMIN),
+	__RISCV_ISA_EXT_DATA(zvkb, RISCV_ISA_EXT_ZVKB),
+	__RISCV_ISA_EXT_DATA(zvkg, RISCV_ISA_EXT_ZVKG),
+	__RISCV_ISA_EXT_BUNDLE(zvkn, riscv_zvkn_bundled_exts),
+	__RISCV_ISA_EXT_BUNDLE(zvknc, riscv_zvknc_bundled_exts),
+	__RISCV_ISA_EXT_DATA(zvkned, RISCV_ISA_EXT_ZVKNED),
+	__RISCV_ISA_EXT_BUNDLE(zvkng, riscv_zvkng_bundled_exts),
+	__RISCV_ISA_EXT_DATA(zvknha, RISCV_ISA_EXT_ZVKNHA),
+	__RISCV_ISA_EXT_DATA(zvknhb, RISCV_ISA_EXT_ZVKNHB),
+	__RISCV_ISA_EXT_BUNDLE(zvks, riscv_zvks_bundled_exts),
+	__RISCV_ISA_EXT_BUNDLE(zvksc, riscv_zvksc_bundled_exts),
+	__RISCV_ISA_EXT_DATA(zvksed, RISCV_ISA_EXT_ZVKSED),
+	__RISCV_ISA_EXT_DATA(zvksh, RISCV_ISA_EXT_ZVKSH),
+	__RISCV_ISA_EXT_BUNDLE(zvksg, riscv_zvksg_bundled_exts),
+	__RISCV_ISA_EXT_DATA(zvkt, RISCV_ISA_EXT_ZVKT),
 	__RISCV_ISA_EXT_DATA(smaia, RISCV_ISA_EXT_SMAIA),
 	__RISCV_ISA_EXT_DATA(smstateen, RISCV_ISA_EXT_SMSTATEEN),
 	__RISCV_ISA_EXT_DATA(ssaia, RISCV_ISA_EXT_SSAIA),
@@ -189,6 +322,31 @@ const struct riscv_isa_ext_data riscv_isa_ext[] = {
 
 const size_t riscv_isa_ext_count = ARRAY_SIZE(riscv_isa_ext);
 
+static void __init match_isa_ext(const struct riscv_isa_ext_data *ext, const char *name,
+				 const char *name_end, struct riscv_isainfo *isainfo)
+{
+	if ((name_end - name == strlen(ext->name)) &&
+	     !strncasecmp(name, ext->name, name_end - name)) {
+		/*
+		 * If this is a bundle, enable all the ISA extensions that
+		 * comprise the bundle.
+		 */
+		if (ext->subset_ext_size) {
+			for (int i = 0; i < ext->subset_ext_size; i++) {
+				if (riscv_isa_extension_check(ext->subset_ext_ids[i]))
+					set_bit(ext->subset_ext_ids[i], isainfo->isa);
+			}
+		}
+
+		/*
+		 * This is valid even for bundle extensions which uses the RISCV_ISA_EXT_INVALID id
+		 * (rejected by riscv_isa_extension_check()).
+		 */
+		if (riscv_isa_extension_check(ext->id))
+			set_bit(ext->id, isainfo->isa);
+	}
+}
+
 static void __init riscv_parse_isa_string(unsigned long *this_hwcap, struct riscv_isainfo *isainfo,
 					  unsigned long *isa2hwcap, const char *isa)
 {
@@ -321,14 +479,6 @@ static void __init riscv_parse_isa_string(unsigned long *this_hwcap, struct risc
 		if (*isa == '_')
 			++isa;
 
-#define SET_ISA_EXT_MAP(name, bit)						\
-		do {								\
-			if ((ext_end - ext == strlen(name)) &&			\
-			     !strncasecmp(ext, name, strlen(name)) &&		\
-			     riscv_isa_extension_check(bit))			\
-				set_bit(bit, isainfo->isa);			\
-		} while (false)							\
-
 		if (unlikely(ext_err))
 			continue;
 		if (!ext_long) {
@@ -340,10 +490,8 @@ static void __init riscv_parse_isa_string(unsigned long *this_hwcap, struct risc
 			}
 		} else {
 			for (int i = 0; i < riscv_isa_ext_count; i++)
-				SET_ISA_EXT_MAP(riscv_isa_ext[i].name,
-						riscv_isa_ext[i].id);
+				match_isa_ext(&riscv_isa_ext[i], ext, ext_end, isainfo);
 		}
-#undef SET_ISA_EXT_MAP
 	}
 }
 
@@ -401,6 +549,20 @@ static void __init riscv_fill_hwcap_from_isa_string(unsigned long *isa2hwcap)
 			set_bit(RISCV_ISA_EXT_ZIHPM, isainfo->isa);
 		}
 
+		/*
+		 * "V" in ISA strings is ambiguous in practice: it should mean
+		 * just the standard V-1.0 but vendors aren't well behaved.
+		 * Many vendors with T-Head CPU cores which implement the 0.7.1
+		 * version of the vector specification put "v" into their DTs.
+		 * CPU cores with the ratified spec will contain non-zero
+		 * marchid.
+		 */
+		if (acpi_disabled && riscv_cached_mvendorid(cpu) == THEAD_VENDOR_ID &&
+		    riscv_cached_marchid(cpu) == 0x0) {
+			this_hwcap &= ~isa2hwcap[RISCV_ISA_EXT_v];
+			clear_bit(RISCV_ISA_EXT_v, isainfo->isa);
+		}
+
 		/*
 		 * All "okay" hart should have same isa. Set HWCAP based on
 		 * common capabilities of every "okay" hart, in case they don't
@@ -442,18 +604,26 @@ static int __init riscv_fill_hwcap_from_ext_list(unsigned long *isa2hwcap)
 		}
 
 		for (int i = 0; i < riscv_isa_ext_count; i++) {
+			const struct riscv_isa_ext_data *ext = &riscv_isa_ext[i];
+
 			if (of_property_match_string(cpu_node, "riscv,isa-extensions",
-						     riscv_isa_ext[i].property) < 0)
+						     ext->property) < 0)
 				continue;
 
-			if (!riscv_isa_extension_check(riscv_isa_ext[i].id))
-				continue;
+			if (ext->subset_ext_size) {
+				for (int j = 0; j < ext->subset_ext_size; j++) {
+					if (riscv_isa_extension_check(ext->subset_ext_ids[i]))
+						set_bit(ext->subset_ext_ids[j], isainfo->isa);
+				}
+			}
 
-			/* Only single letter extensions get set in hwcap */
-			if (strnlen(riscv_isa_ext[i].name, 2) == 1)
-				this_hwcap |= isa2hwcap[riscv_isa_ext[i].id];
+			if (riscv_isa_extension_check(ext->id)) {
+				set_bit(ext->id, isainfo->isa);
 
-			set_bit(riscv_isa_ext[i].id, isainfo->isa);
+				/* Only single letter extensions get set in hwcap */
+				if (strnlen(riscv_isa_ext[i].name, 2) == 1)
+					this_hwcap |= isa2hwcap[riscv_isa_ext[i].id];
+			}
 		}
 
 		of_node_put(cpu_node);
@@ -643,6 +813,16 @@ static int check_unaligned_access(void *param)
 		(speed == RISCV_HWPROBE_MISALIGNED_FAST) ? "fast" : "slow");
 
 	per_cpu(misaligned_access_speed, cpu) = speed;
+
+	/*
+	 * Set the value of fast_misaligned_access of a CPU. These operations
+	 * are atomic to avoid race conditions.
+	 */
+	if (speed == RISCV_HWPROBE_MISALIGNED_FAST)
+		cpumask_set_cpu(cpu, &fast_misaligned_access);
+	else
+		cpumask_clear_cpu(cpu, &fast_misaligned_access);
+
 	return 0;
 }
 
@@ -655,13 +835,69 @@ static void check_unaligned_access_nonboot_cpu(void *param)
 		check_unaligned_access(pages[cpu]);
 }
 
+DEFINE_STATIC_KEY_FALSE(fast_misaligned_access_speed_key);
+
+static void modify_unaligned_access_branches(cpumask_t *mask, int weight)
+{
+	if (cpumask_weight(mask) == weight)
+		static_branch_enable_cpuslocked(&fast_misaligned_access_speed_key);
+	else
+		static_branch_disable_cpuslocked(&fast_misaligned_access_speed_key);
+}
+
+static void set_unaligned_access_static_branches_except_cpu(int cpu)
+{
+	/*
+	 * Same as set_unaligned_access_static_branches, except excludes the
+	 * given CPU from the result. When a CPU is hotplugged into an offline
+	 * state, this function is called before the CPU is set to offline in
+	 * the cpumask, and thus the CPU needs to be explicitly excluded.
+	 */
+
+	cpumask_t fast_except_me;
+
+	cpumask_and(&fast_except_me, &fast_misaligned_access, cpu_online_mask);
+	cpumask_clear_cpu(cpu, &fast_except_me);
+
+	modify_unaligned_access_branches(&fast_except_me, num_online_cpus() - 1);
+}
+
+static void set_unaligned_access_static_branches(void)
+{
+	/*
+	 * This will be called after check_unaligned_access_all_cpus so the
+	 * result of unaligned access speed for all CPUs will be available.
+	 *
+	 * To avoid the number of online cpus changing between reading
+	 * cpu_online_mask and calling num_online_cpus, cpus_read_lock must be
+	 * held before calling this function.
+	 */
+
+	cpumask_t fast_and_online;
+
+	cpumask_and(&fast_and_online, &fast_misaligned_access, cpu_online_mask);
+
+	modify_unaligned_access_branches(&fast_and_online, num_online_cpus());
+}
+
+static int lock_and_set_unaligned_access_static_branch(void)
+{
+	cpus_read_lock();
+	set_unaligned_access_static_branches();
+	cpus_read_unlock();
+
+	return 0;
+}
+
+arch_initcall_sync(lock_and_set_unaligned_access_static_branch);
+
 static int riscv_online_cpu(unsigned int cpu)
 {
 	static struct page *buf;
 
 	/* We are already set since the last check */
 	if (per_cpu(misaligned_access_speed, cpu) != RISCV_HWPROBE_MISALIGNED_UNKNOWN)
-		return 0;
+		goto exit;
 
 	buf = alloc_pages(GFP_KERNEL, MISALIGNED_BUFFER_ORDER);
 	if (!buf) {
@@ -671,6 +907,17 @@ static int riscv_online_cpu(unsigned int cpu)
 
 	check_unaligned_access(buf);
 	__free_pages(buf, MISALIGNED_BUFFER_ORDER);
+
+exit:
+	set_unaligned_access_static_branches();
+
+	return 0;
+}
+
+static int riscv_offline_cpu(unsigned int cpu)
+{
+	set_unaligned_access_static_branches_except_cpu(cpu);
+
 	return 0;
 }
 
@@ -705,9 +952,12 @@ static int check_unaligned_access_all_cpus(void)
 	/* Check core 0. */
 	smp_call_on_cpu(0, check_unaligned_access, bufs[0], true);
 
-	/* Setup hotplug callback for any new CPUs that come online. */
+	/*
+	 * Setup hotplug callbacks for any new CPUs that come online or go
+	 * offline.
+	 */
 	cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "riscv:online",
-				  riscv_online_cpu, NULL);
+				  riscv_online_cpu, riscv_offline_cpu);
 
 out:
 	unaligned_emulation_finish();
@@ -725,7 +975,7 @@ arch_initcall(check_unaligned_access_all_cpus);
 void riscv_user_isa_enable(void)
 {
 	if (riscv_cpu_has_extension_unlikely(smp_processor_id(), RISCV_ISA_EXT_ZICBOZ))
-		csr_set(CSR_SENVCFG, ENVCFG_CBZE);
+		csr_set(CSR_ENVCFG, ENVCFG_CBZE);
 }
 
 #ifdef CONFIG_RISCV_ALTERNATIVE
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/efi.c linux-libre-6.8-gnu/arch/riscv/kernel/efi.c
index aa6209a74c83..b64bf1624a05 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/efi.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/efi.c
@@ -60,7 +60,7 @@ int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
 static int __init set_permissions(pte_t *ptep, unsigned long addr, void *data)
 {
 	efi_memory_desc_t *md = data;
-	pte_t pte = READ_ONCE(*ptep);
+	pte_t pte = ptep_get(ptep);
 	unsigned long val;
 
 	if (md->attribute & EFI_MEMORY_RO) {
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/elf_kexec.c linux-libre-6.8-gnu/arch/riscv/kernel/elf_kexec.c
index e60fbd8660c4..5bd1ec3341fe 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/elf_kexec.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/elf_kexec.c
@@ -216,7 +216,6 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
 	if (ret)
 		goto out;
 	kernel_start = image->start;
-	pr_notice("The entry point of kernel at 0x%lx\n", image->start);
 
 	/* Add the kernel binary to the image */
 	ret = riscv_kexec_elf_load(image, &ehdr, &elf_info,
@@ -252,8 +251,8 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
 		image->elf_load_addr = kbuf.mem;
 		image->elf_headers_sz = headers_sz;
 
-		pr_debug("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-			 image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
+		kexec_dprintk("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
 
 		/* Setup cmdline for kdump kernel case */
 		modified_cmdline = setup_kdump_cmdline(image, cmdline,
@@ -275,6 +274,8 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
 		pr_err("Error loading purgatory ret=%d\n", ret);
 		goto out;
 	}
+	kexec_dprintk("Loaded purgatory at 0x%lx\n", kbuf.mem);
+
 	ret = kexec_purgatory_get_set_symbol(image, "riscv_kernel_entry",
 					     &kernel_start,
 					     sizeof(kernel_start), 0);
@@ -293,7 +294,7 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
 		if (ret)
 			goto out;
 		initrd_pbase = kbuf.mem;
-		pr_notice("Loaded initrd at 0x%lx\n", initrd_pbase);
+		kexec_dprintk("Loaded initrd at 0x%lx\n", initrd_pbase);
 	}
 
 	/* Add the DTB to the image */
@@ -318,7 +319,7 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
 	}
 	/* Cache the fdt buffer address for memory cleanup */
 	image->arch.fdt = fdt;
-	pr_notice("Loaded device tree at 0x%lx\n", kbuf.mem);
+	kexec_dprintk("Loaded device tree at 0x%lx\n", kbuf.mem);
 	goto out;
 
 out_free_fdt:
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/entry.S linux-libre-6.8-gnu/arch/riscv/kernel/entry.S
index 54ca4564a926..9d1a305d5508 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/entry.S
+++ linux-libre-6.8-gnu/arch/riscv/kernel/entry.S
@@ -83,6 +83,10 @@ SYM_CODE_START(handle_exception)
 	/* Load the kernel shadow call stack pointer if coming from userspace */
 	scs_load_current_if_task_changed s5
 
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+	move a0, sp
+	call riscv_v_context_nesting_start
+#endif
 	move a0, sp /* pt_regs */
 	la ra, ret_from_exception
 
@@ -138,6 +142,10 @@ SYM_CODE_START_NOALIGN(ret_from_exception)
 	 */
 	csrw CSR_SCRATCH, tp
 1:
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+	move a0, sp
+	call riscv_v_context_nesting_end
+#endif
 	REG_L a0, PT_STATUS(sp)
 	/*
 	 * The current load reservation is effectively part of the processor's
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/ftrace.c linux-libre-6.8-gnu/arch/riscv/kernel/ftrace.c
index 03a6434a8cdd..f5aa24d9e1c1 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/ftrace.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/ftrace.c
@@ -178,32 +178,28 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 }
 
 #ifdef CONFIG_DYNAMIC_FTRACE
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
+		       struct ftrace_ops *op, struct ftrace_regs *fregs)
+{
+	struct pt_regs *regs = arch_ftrace_get_regs(fregs);
+	unsigned long *parent = (unsigned long *)&regs->ra;
+
+	prepare_ftrace_return(parent, ip, frame_pointer(regs));
+}
+#else /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
 extern void ftrace_graph_call(void);
-extern void ftrace_graph_regs_call(void);
 int ftrace_enable_ftrace_graph_caller(void)
 {
-	int ret;
-
-	ret = __ftrace_modify_call((unsigned long)&ftrace_graph_call,
-				    (unsigned long)&prepare_ftrace_return, true, true);
-	if (ret)
-		return ret;
-
-	return __ftrace_modify_call((unsigned long)&ftrace_graph_regs_call,
+	return __ftrace_modify_call((unsigned long)&ftrace_graph_call,
 				    (unsigned long)&prepare_ftrace_return, true, true);
 }
 
 int ftrace_disable_ftrace_graph_caller(void)
 {
-	int ret;
-
-	ret = __ftrace_modify_call((unsigned long)&ftrace_graph_call,
-				    (unsigned long)&prepare_ftrace_return, false, true);
-	if (ret)
-		return ret;
-
-	return __ftrace_modify_call((unsigned long)&ftrace_graph_regs_call,
+	return __ftrace_modify_call((unsigned long)&ftrace_graph_call,
 				    (unsigned long)&prepare_ftrace_return, false, true);
 }
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
 #endif /* CONFIG_DYNAMIC_FTRACE */
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/head.S linux-libre-6.8-gnu/arch/riscv/kernel/head.S
index 76ace1e0b46f..4236a69c35cb 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/head.S
+++ linux-libre-6.8-gnu/arch/riscv/kernel/head.S
@@ -11,7 +11,6 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/csr.h>
-#include <asm/cpu_ops_sbi.h>
 #include <asm/hwcap.h>
 #include <asm/image.h>
 #include <asm/scs.h>
@@ -89,6 +88,7 @@ relocate_enable_mmu:
 	/* Compute satp for kernel page tables, but don't load it yet */
 	srl a2, a0, PAGE_SHIFT
 	la a1, satp_mode
+	XIP_FIXUP_OFFSET a1
 	REG_L a1, 0(a1)
 	or a2, a2, a1
 
@@ -265,10 +265,12 @@ SYM_CODE_START(_start_kernel)
 	la sp, _end + THREAD_SIZE
 	XIP_FIXUP_OFFSET sp
 	mv s0, a0
+	mv s1, a1
 	call __copy_data
 
-	/* Restore a0 copy */
+	/* Restore a0 & a1 copy */
 	mv a0, s0
+	mv a1, s1
 #endif
 
 #ifndef CONFIG_XIP_KERNEL
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/kernel_mode_vector.c linux-libre-6.8-gnu/arch/riscv/kernel/kernel_mode_vector.c
new file mode 100644
index 000000000000..6afe80c7f03a
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/kernel/kernel_mode_vector.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ * Copyright (C) 2017 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ * Copyright (C) 2021 SiFive
+ */
+#include <linux/compiler.h>
+#include <linux/irqflags.h>
+#include <linux/percpu.h>
+#include <linux/preempt.h>
+#include <linux/types.h>
+
+#include <asm/vector.h>
+#include <asm/switch_to.h>
+#include <asm/simd.h>
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+#include <asm/asm-prototypes.h>
+#endif
+
+static inline void riscv_v_flags_set(u32 flags)
+{
+	WRITE_ONCE(current->thread.riscv_v_flags, flags);
+}
+
+static inline void riscv_v_start(u32 flags)
+{
+	int orig;
+
+	orig = riscv_v_flags();
+	BUG_ON((orig & flags) != 0);
+	riscv_v_flags_set(orig | flags);
+	barrier();
+}
+
+static inline void riscv_v_stop(u32 flags)
+{
+	int orig;
+
+	barrier();
+	orig = riscv_v_flags();
+	BUG_ON((orig & flags) == 0);
+	riscv_v_flags_set(orig & ~flags);
+}
+
+/*
+ * Claim ownership of the CPU vector context for use by the calling context.
+ *
+ * The caller may freely manipulate the vector context metadata until
+ * put_cpu_vector_context() is called.
+ */
+void get_cpu_vector_context(void)
+{
+	/*
+	 * disable softirqs so it is impossible for softirqs to nest
+	 * get_cpu_vector_context() when kernel is actively using Vector.
+	 */
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+		local_bh_disable();
+	else
+		preempt_disable();
+
+	riscv_v_start(RISCV_KERNEL_MODE_V);
+}
+
+/*
+ * Release the CPU vector context.
+ *
+ * Must be called from a context in which get_cpu_vector_context() was
+ * previously called, with no call to put_cpu_vector_context() in the
+ * meantime.
+ */
+void put_cpu_vector_context(void)
+{
+	riscv_v_stop(RISCV_KERNEL_MODE_V);
+
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+		local_bh_enable();
+	else
+		preempt_enable();
+}
+
+#ifdef CONFIG_RISCV_ISA_V_PREEMPTIVE
+static __always_inline u32 *riscv_v_flags_ptr(void)
+{
+	return &current->thread.riscv_v_flags;
+}
+
+static inline void riscv_preempt_v_set_dirty(void)
+{
+	*riscv_v_flags_ptr() |= RISCV_PREEMPT_V_DIRTY;
+}
+
+static inline void riscv_preempt_v_reset_flags(void)
+{
+	*riscv_v_flags_ptr() &= ~(RISCV_PREEMPT_V_DIRTY | RISCV_PREEMPT_V_NEED_RESTORE);
+}
+
+static inline void riscv_v_ctx_depth_inc(void)
+{
+	*riscv_v_flags_ptr() += RISCV_V_CTX_UNIT_DEPTH;
+}
+
+static inline void riscv_v_ctx_depth_dec(void)
+{
+	*riscv_v_flags_ptr() -= RISCV_V_CTX_UNIT_DEPTH;
+}
+
+static inline u32 riscv_v_ctx_get_depth(void)
+{
+	return *riscv_v_flags_ptr() & RISCV_V_CTX_DEPTH_MASK;
+}
+
+static int riscv_v_stop_kernel_context(void)
+{
+	if (riscv_v_ctx_get_depth() != 0 || !riscv_preempt_v_started(current))
+		return 1;
+
+	riscv_preempt_v_clear_dirty(current);
+	riscv_v_stop(RISCV_PREEMPT_V);
+	return 0;
+}
+
+static int riscv_v_start_kernel_context(bool *is_nested)
+{
+	struct __riscv_v_ext_state *kvstate, *uvstate;
+
+	kvstate = &current->thread.kernel_vstate;
+	if (!kvstate->datap)
+		return -ENOENT;
+
+	if (riscv_preempt_v_started(current)) {
+		WARN_ON(riscv_v_ctx_get_depth() == 0);
+		*is_nested = true;
+		get_cpu_vector_context();
+		if (riscv_preempt_v_dirty(current)) {
+			__riscv_v_vstate_save(kvstate, kvstate->datap);
+			riscv_preempt_v_clear_dirty(current);
+		}
+		riscv_preempt_v_set_restore(current);
+		return 0;
+	}
+
+	/* Transfer the ownership of V from user to kernel, then save */
+	riscv_v_start(RISCV_PREEMPT_V | RISCV_PREEMPT_V_DIRTY);
+	if ((task_pt_regs(current)->status & SR_VS) == SR_VS_DIRTY) {
+		uvstate = &current->thread.vstate;
+		__riscv_v_vstate_save(uvstate, uvstate->datap);
+	}
+	riscv_preempt_v_clear_dirty(current);
+	return 0;
+}
+
+/* low-level V context handling code, called with irq disabled */
+asmlinkage void riscv_v_context_nesting_start(struct pt_regs *regs)
+{
+	int depth;
+
+	if (!riscv_preempt_v_started(current))
+		return;
+
+	depth = riscv_v_ctx_get_depth();
+	if (depth == 0 && (regs->status & SR_VS) == SR_VS_DIRTY)
+		riscv_preempt_v_set_dirty();
+
+	riscv_v_ctx_depth_inc();
+}
+
+asmlinkage void riscv_v_context_nesting_end(struct pt_regs *regs)
+{
+	struct __riscv_v_ext_state *vstate = &current->thread.kernel_vstate;
+	u32 depth;
+
+	WARN_ON(!irqs_disabled());
+
+	if (!riscv_preempt_v_started(current))
+		return;
+
+	riscv_v_ctx_depth_dec();
+	depth = riscv_v_ctx_get_depth();
+	if (depth == 0) {
+		if (riscv_preempt_v_restore(current)) {
+			__riscv_v_vstate_restore(vstate, vstate->datap);
+			__riscv_v_vstate_clean(regs);
+			riscv_preempt_v_reset_flags();
+		}
+	}
+}
+#else
+#define riscv_v_start_kernel_context(nested)	(-ENOENT)
+#define riscv_v_stop_kernel_context()		(-ENOENT)
+#endif /* CONFIG_RISCV_ISA_V_PREEMPTIVE */
+
+/*
+ * kernel_vector_begin(): obtain the CPU vector registers for use by the calling
+ * context
+ *
+ * Must not be called unless may_use_simd() returns true.
+ * Task context in the vector registers is saved back to memory as necessary.
+ *
+ * A matching call to kernel_vector_end() must be made before returning from the
+ * calling context.
+ *
+ * The caller may freely use the vector registers until kernel_vector_end() is
+ * called.
+ */
+void kernel_vector_begin(void)
+{
+	bool nested = false;
+
+	if (WARN_ON(!has_vector()))
+		return;
+
+	BUG_ON(!may_use_simd());
+
+	if (riscv_v_start_kernel_context(&nested)) {
+		get_cpu_vector_context();
+		riscv_v_vstate_save(&current->thread.vstate, task_pt_regs(current));
+	}
+
+	if (!nested)
+		riscv_v_vstate_set_restore(current, task_pt_regs(current));
+
+	riscv_v_enable();
+}
+EXPORT_SYMBOL_GPL(kernel_vector_begin);
+
+/*
+ * kernel_vector_end(): give the CPU vector registers back to the current task
+ *
+ * Must be called from a context in which kernel_vector_begin() was previously
+ * called, with no call to kernel_vector_end() in the meantime.
+ *
+ * The caller must not use the vector registers after this function is called,
+ * unless kernel_vector_begin() is called again in the meantime.
+ */
+void kernel_vector_end(void)
+{
+	if (WARN_ON(!has_vector()))
+		return;
+
+	riscv_v_disable();
+
+	if (riscv_v_stop_kernel_context())
+		put_cpu_vector_context();
+}
+EXPORT_SYMBOL_GPL(kernel_vector_end);
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/machine_kexec.c linux-libre-6.8-gnu/arch/riscv/kernel/machine_kexec.c
index 2d139b724bc8..ed9cad20c039 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/machine_kexec.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/machine_kexec.c
@@ -18,30 +18,6 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-/*
- * kexec_image_info - Print received image details
- */
-static void
-kexec_image_info(const struct kimage *image)
-{
-	unsigned long i;
-
-	pr_debug("Kexec image info:\n");
-	pr_debug("\ttype:        %d\n", image->type);
-	pr_debug("\tstart:       %lx\n", image->start);
-	pr_debug("\thead:        %lx\n", image->head);
-	pr_debug("\tnr_segments: %lu\n", image->nr_segments);
-
-	for (i = 0; i < image->nr_segments; i++) {
-		pr_debug("\t    segment[%lu]: %016lx - %016lx", i,
-			image->segment[i].mem,
-			image->segment[i].mem + image->segment[i].memsz);
-		pr_debug("\t\t0x%lx bytes, %lu pages\n",
-			(unsigned long) image->segment[i].memsz,
-			(unsigned long) image->segment[i].memsz /  PAGE_SIZE);
-	}
-}
-
 /*
  * machine_kexec_prepare - Initialize kexec
  *
@@ -60,8 +36,6 @@ machine_kexec_prepare(struct kimage *image)
 	unsigned int control_code_buffer_sz = 0;
 	int i = 0;
 
-	kexec_image_info(image);
-
 	/* Find the Flattened Device Tree and save its physical address */
 	for (i = 0; i < image->nr_segments; i++) {
 		if (image->segment[i].memsz <= sizeof(fdt))
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/mcount-dyn.S linux-libre-6.8-gnu/arch/riscv/kernel/mcount-dyn.S
index 58dd96a2a153..b7561288e8da 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/mcount-dyn.S
+++ linux-libre-6.8-gnu/arch/riscv/kernel/mcount-dyn.S
@@ -3,12 +3,12 @@
 
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include <linux/export.h>
 #include <asm/asm.h>
 #include <asm/csr.h>
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
-#include <asm-generic/export.h>
 #include <asm/ftrace.h>
 
 	.text
@@ -57,31 +57,150 @@
 	.endm
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
-	.macro SAVE_ALL
+
+/**
+* SAVE_ABI_REGS - save regs against the pt_regs struct
+*
+* @all: tell if saving all the regs
+*
+* If all is set, all the regs will be saved, otherwise only ABI
+* related regs (a0-a7,epc,ra and optional s0) will be saved.
+*
+* After the stack is established,
+*
+* 0(sp) stores the PC of the traced function which can be accessed
+* by &(fregs)->regs->epc in tracing function. Note that the real
+* function entry address should be computed with -FENTRY_RA_OFFSET.
+*
+* 8(sp) stores the function return address (i.e. parent IP) that
+* can be accessed by &(fregs)->regs->ra in tracing function.
+*
+* The other regs are saved at the respective localtion and accessed
+* by the respective pt_regs member.
+*
+* Here is the layout of stack for your reference.
+*
+* PT_SIZE_ON_STACK  ->  +++++++++
+*                       + ..... +
+*                       + t3-t6 +
+*                       + s2-s11+
+*                       + a0-a7 + --++++-> ftrace_caller saved
+*                       + s1    +   +
+*                       + s0    + --+
+*                       + t0-t2 +   +
+*                       + tp    +   +
+*                       + gp    +   +
+*                       + sp    +   +
+*                       + ra    + --+ // parent IP
+*               sp  ->  + epc   + --+ // PC
+*                       +++++++++
+**/
+	.macro SAVE_ABI_REGS, all=0
 	addi	sp, sp, -PT_SIZE_ON_STACK
 
-	REG_S t0,  PT_EPC(sp)
-	REG_S x1,  PT_RA(sp)
-	REG_S x2,  PT_SP(sp)
-	REG_S x3,  PT_GP(sp)
-	REG_S x4,  PT_TP(sp)
-	REG_S x5,  PT_T0(sp)
-	save_from_x6_to_x31
+	REG_S	t0,  PT_EPC(sp)
+	REG_S	x1,  PT_RA(sp)
+
+	// save the ABI regs
+
+	REG_S	x10, PT_A0(sp)
+	REG_S	x11, PT_A1(sp)
+	REG_S	x12, PT_A2(sp)
+	REG_S	x13, PT_A3(sp)
+	REG_S	x14, PT_A4(sp)
+	REG_S	x15, PT_A5(sp)
+	REG_S	x16, PT_A6(sp)
+	REG_S	x17, PT_A7(sp)
+
+	// save the leftover regs
+
+	.if \all == 1
+	REG_S	x2, PT_SP(sp)
+	REG_S	x3, PT_GP(sp)
+	REG_S	x4, PT_TP(sp)
+	REG_S	x5, PT_T0(sp)
+	REG_S	x6, PT_T1(sp)
+	REG_S	x7, PT_T2(sp)
+	REG_S	x8, PT_S0(sp)
+	REG_S	x9, PT_S1(sp)
+	REG_S	x18, PT_S2(sp)
+	REG_S	x19, PT_S3(sp)
+	REG_S	x20, PT_S4(sp)
+	REG_S	x21, PT_S5(sp)
+	REG_S	x22, PT_S6(sp)
+	REG_S	x23, PT_S7(sp)
+	REG_S	x24, PT_S8(sp)
+	REG_S	x25, PT_S9(sp)
+	REG_S	x26, PT_S10(sp)
+	REG_S	x27, PT_S11(sp)
+	REG_S	x28, PT_T3(sp)
+	REG_S	x29, PT_T4(sp)
+	REG_S	x30, PT_T5(sp)
+	REG_S	x31, PT_T6(sp)
+
+	// save s0 if FP_TEST defined
+
+	.else
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	REG_S	x8, PT_S0(sp)
+#endif
+	.endif
 	.endm
 
-	.macro RESTORE_ALL
-	REG_L x1,  PT_RA(sp)
-	REG_L x2,  PT_SP(sp)
-	REG_L x3,  PT_GP(sp)
-	REG_L x4,  PT_TP(sp)
-	/* Restore t0 with PT_EPC */
-	REG_L x5,  PT_EPC(sp)
-	restore_from_x6_to_x31
+	.macro RESTORE_ABI_REGS, all=0
+	REG_L	t0, PT_EPC(sp)
+	REG_L	x1, PT_RA(sp)
+	REG_L	x10, PT_A0(sp)
+	REG_L	x11, PT_A1(sp)
+	REG_L	x12, PT_A2(sp)
+	REG_L	x13, PT_A3(sp)
+	REG_L	x14, PT_A4(sp)
+	REG_L	x15, PT_A5(sp)
+	REG_L	x16, PT_A6(sp)
+	REG_L	x17, PT_A7(sp)
 
+	.if \all == 1
+	REG_L	x2, PT_SP(sp)
+	REG_L	x3, PT_GP(sp)
+	REG_L	x4, PT_TP(sp)
+	REG_L	x6, PT_T1(sp)
+	REG_L	x7, PT_T2(sp)
+	REG_L	x8, PT_S0(sp)
+	REG_L	x9, PT_S1(sp)
+	REG_L	x18, PT_S2(sp)
+	REG_L	x19, PT_S3(sp)
+	REG_L	x20, PT_S4(sp)
+	REG_L	x21, PT_S5(sp)
+	REG_L	x22, PT_S6(sp)
+	REG_L	x23, PT_S7(sp)
+	REG_L	x24, PT_S8(sp)
+	REG_L	x25, PT_S9(sp)
+	REG_L	x26, PT_S10(sp)
+	REG_L	x27, PT_S11(sp)
+	REG_L	x28, PT_T3(sp)
+	REG_L	x29, PT_T4(sp)
+	REG_L	x30, PT_T5(sp)
+	REG_L	x31, PT_T6(sp)
+
+	.else
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	REG_L	x8, PT_S0(sp)
+#endif
+	.endif
 	addi	sp, sp, PT_SIZE_ON_STACK
 	.endm
+
+	.macro PREPARE_ARGS
+	addi	a0, t0, -FENTRY_RA_OFFSET
+	la	a1, function_trace_op
+	REG_L	a2, 0(a1)
+	mv	a1, ra
+	mv	a3, sp
+	.endm
+
 #endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
 
+#ifndef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 SYM_FUNC_START(ftrace_caller)
 	SAVE_ABI
 
@@ -105,34 +224,39 @@ SYM_INNER_LABEL(ftrace_graph_call, SYM_L_GLOBAL)
 	call	ftrace_stub
 #endif
 	RESTORE_ABI
-	jr t0
+	jr	t0
 SYM_FUNC_END(ftrace_caller)
 
-#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+#else /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
 SYM_FUNC_START(ftrace_regs_caller)
-	SAVE_ALL
-
-	addi	a0, t0, -FENTRY_RA_OFFSET
-	la	a1, function_trace_op
-	REG_L	a2, 0(a1)
-	mv	a1, ra
-	mv	a3, sp
+	mv	t1, zero
+	SAVE_ABI_REGS 1
+	PREPARE_ARGS
 
 SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL)
 	call	ftrace_stub
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	addi	a0, sp, PT_RA
-	REG_L	a1, PT_EPC(sp)
-	addi	a1, a1, -FENTRY_RA_OFFSET
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	mv	a2, s0
-#endif
-SYM_INNER_LABEL(ftrace_graph_regs_call, SYM_L_GLOBAL)
+	RESTORE_ABI_REGS 1
+	bnez	t1, .Ldirect
+	jr	t0
+.Ldirect:
+	jr	t1
+SYM_FUNC_END(ftrace_regs_caller)
+
+SYM_FUNC_START(ftrace_caller)
+	SAVE_ABI_REGS 0
+	PREPARE_ARGS
+
+SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
 	call	ftrace_stub
-#endif
 
-	RESTORE_ALL
-	jr t0
-SYM_FUNC_END(ftrace_regs_caller)
+	RESTORE_ABI_REGS 0
+	jr	t0
+SYM_FUNC_END(ftrace_caller)
 #endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+SYM_CODE_START(ftrace_stub_direct_tramp)
+	jr	t0
+SYM_CODE_END(ftrace_stub_direct_tramp)
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/mcount.S linux-libre-6.8-gnu/arch/riscv/kernel/mcount.S
index b4dd9ed6849e..d7ec69ac6910 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/mcount.S
+++ linux-libre-6.8-gnu/arch/riscv/kernel/mcount.S
@@ -4,12 +4,12 @@
 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <linux/cfi_types.h>
+#include <linux/export.h>
 #include <asm/asm.h>
 #include <asm/csr.h>
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
-#include <asm-generic/export.h>
 #include <asm/ftrace.h>
 
 	.text
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/module.c linux-libre-6.8-gnu/arch/riscv/kernel/module.c
index aac019ed63b1..5e5a82644451 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/module.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/module.c
@@ -723,8 +723,8 @@ static int add_relocation_to_accumulate(struct module *me, int type,
 
 			if (!bucket) {
 				kfree(entry);
-				kfree(rel_head);
 				kfree(rel_head->rel_entry);
+				kfree(rel_head);
 				return -ENOMEM;
 			}
 
@@ -747,6 +747,10 @@ initialize_relocation_hashtable(unsigned int num_relocations,
 {
 	/* Can safely assume that bits is not greater than sizeof(long) */
 	unsigned long hashtable_size = roundup_pow_of_two(num_relocations);
+	/*
+	 * When hashtable_size == 1, hashtable_bits == 0.
+	 * This is valid because the hashing algorithm returns 0 in this case.
+	 */
 	unsigned int hashtable_bits = ilog2(hashtable_size);
 
 	/*
@@ -760,10 +764,10 @@ initialize_relocation_hashtable(unsigned int num_relocations,
 	hashtable_size <<= should_double_size;
 
 	*relocation_hashtable = kmalloc_array(hashtable_size,
-					      sizeof(*relocation_hashtable),
+					      sizeof(**relocation_hashtable),
 					      GFP_KERNEL);
 	if (!*relocation_hashtable)
-		return -ENOMEM;
+		return 0;
 
 	__hash_init(*relocation_hashtable, hashtable_size);
 
@@ -779,6 +783,7 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 	Elf_Sym *sym;
 	void *location;
 	unsigned int i, type;
+	unsigned int j_idx = 0;
 	Elf_Addr v;
 	int res;
 	unsigned int num_relocations = sechdrs[relsec].sh_size / sizeof(*rel);
@@ -789,8 +794,8 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 	hashtable_bits = initialize_relocation_hashtable(num_relocations,
 							 &relocation_hashtable);
 
-	if (hashtable_bits < 0)
-		return hashtable_bits;
+	if (!relocation_hashtable)
+		return -ENOMEM;
 
 	INIT_LIST_HEAD(&used_buckets_list);
 
@@ -829,9 +834,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 		v = sym->st_value + rel[i].r_addend;
 
 		if (type == R_RISCV_PCREL_LO12_I || type == R_RISCV_PCREL_LO12_S) {
-			unsigned int j;
+			unsigned int j = j_idx;
+			bool found = false;
 
-			for (j = 0; j < sechdrs[relsec].sh_size / sizeof(*rel); j++) {
+			do {
 				unsigned long hi20_loc =
 					sechdrs[sechdrs[relsec].sh_info].sh_addr
 					+ rel[j].r_offset;
@@ -860,16 +866,26 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 					hi20 = (offset + 0x800) & 0xfffff000;
 					lo12 = offset - hi20;
 					v = lo12;
+					found = true;
 
 					break;
 				}
-			}
-			if (j == sechdrs[relsec].sh_size / sizeof(*rel)) {
+
+				j++;
+				if (j > sechdrs[relsec].sh_size / sizeof(*rel))
+					j = 0;
+
+			} while (j_idx != j);
+
+			if (!found) {
 				pr_err(
 				  "%s: Can not find HI20 relocation information\n",
 				  me->name);
 				return -EINVAL;
 			}
+
+			/* Record the previous j-loop end index */
+			j_idx = j;
 		}
 
 		if (reloc_handlers[type].accumulate_handler)
@@ -894,7 +910,8 @@ void *module_alloc(unsigned long size)
 {
 	return __vmalloc_node_range(size, 1, MODULES_VADDR,
 				    MODULES_END, GFP_KERNEL,
-				    PAGE_KERNEL, 0, NUMA_NO_NODE,
+				    PAGE_KERNEL, VM_FLUSH_RESET_PERMS,
+				    NUMA_NO_NODE,
 				    __builtin_return_address(0));
 }
 #endif
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/paravirt.c linux-libre-6.8-gnu/arch/riscv/kernel/paravirt.c
new file mode 100644
index 000000000000..0d6225fd3194
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/kernel/paravirt.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023 Ventana Micro Systems Inc.
+ */
+
+#define pr_fmt(fmt) "riscv-pv: " fmt
+
+#include <linux/cpuhotplug.h>
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/jump_label.h>
+#include <linux/kconfig.h>
+#include <linux/kernel.h>
+#include <linux/percpu-defs.h>
+#include <linux/printk.h>
+#include <linux/static_call.h>
+#include <linux/types.h>
+
+#include <asm/barrier.h>
+#include <asm/page.h>
+#include <asm/paravirt.h>
+#include <asm/sbi.h>
+
+struct static_key paravirt_steal_enabled;
+struct static_key paravirt_steal_rq_enabled;
+
+static u64 native_steal_clock(int cpu)
+{
+	return 0;
+}
+
+DEFINE_STATIC_CALL(pv_steal_clock, native_steal_clock);
+
+static bool steal_acc = true;
+static int __init parse_no_stealacc(char *arg)
+{
+	steal_acc = false;
+	return 0;
+}
+
+early_param("no-steal-acc", parse_no_stealacc);
+
+static DEFINE_PER_CPU(struct sbi_sta_struct, steal_time) __aligned(64);
+
+static bool __init has_pv_steal_clock(void)
+{
+	if (sbi_spec_version >= sbi_mk_version(2, 0) &&
+	    sbi_probe_extension(SBI_EXT_STA) > 0) {
+		pr_info("SBI STA extension detected\n");
+		return true;
+	}
+
+	return false;
+}
+
+static int sbi_sta_steal_time_set_shmem(unsigned long lo, unsigned long hi,
+					unsigned long flags)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_STA, SBI_EXT_STA_STEAL_TIME_SET_SHMEM,
+			lo, hi, flags, 0, 0, 0);
+	if (ret.error) {
+		if (lo == SBI_STA_SHMEM_DISABLE && hi == SBI_STA_SHMEM_DISABLE)
+			pr_warn("Failed to disable steal-time shmem");
+		else
+			pr_warn("Failed to set steal-time shmem");
+		return sbi_err_map_linux_errno(ret.error);
+	}
+
+	return 0;
+}
+
+static int pv_time_cpu_online(unsigned int cpu)
+{
+	struct sbi_sta_struct *st = this_cpu_ptr(&steal_time);
+	phys_addr_t pa = __pa(st);
+	unsigned long lo = (unsigned long)pa;
+	unsigned long hi = IS_ENABLED(CONFIG_32BIT) ? upper_32_bits((u64)pa) : 0;
+
+	return sbi_sta_steal_time_set_shmem(lo, hi, 0);
+}
+
+static int pv_time_cpu_down_prepare(unsigned int cpu)
+{
+	return sbi_sta_steal_time_set_shmem(SBI_STA_SHMEM_DISABLE,
+					    SBI_STA_SHMEM_DISABLE, 0);
+}
+
+static u64 pv_time_steal_clock(int cpu)
+{
+	struct sbi_sta_struct *st = per_cpu_ptr(&steal_time, cpu);
+	__le32 sequence;
+	__le64 steal;
+
+	/*
+	 * Check the sequence field before and after reading the steal
+	 * field. Repeat the read if it is different or odd.
+	 */
+	do {
+		sequence = READ_ONCE(st->sequence);
+		virt_rmb();
+		steal = READ_ONCE(st->steal);
+		virt_rmb();
+	} while ((le32_to_cpu(sequence) & 1) ||
+		 sequence != READ_ONCE(st->sequence));
+
+	return le64_to_cpu(steal);
+}
+
+int __init pv_time_init(void)
+{
+	int ret;
+
+	if (!has_pv_steal_clock())
+		return 0;
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+				"riscv/pv_time:online",
+				pv_time_cpu_online,
+				pv_time_cpu_down_prepare);
+	if (ret < 0)
+		return ret;
+
+	static_call_update(pv_steal_clock, pv_time_steal_clock);
+
+	static_key_slow_inc(&paravirt_steal_enabled);
+	if (steal_acc)
+		static_key_slow_inc(&paravirt_steal_rq_enabled);
+
+	pr_info("Computing paravirt steal-time\n");
+
+	return 0;
+}
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/patch.c linux-libre-6.8-gnu/arch/riscv/kernel/patch.c
index 13ee7bf589a1..37e87fdcf6a0 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/patch.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/patch.c
@@ -14,6 +14,7 @@
 #include <asm/fixmap.h>
 #include <asm/ftrace.h>
 #include <asm/patch.h>
+#include <asm/sections.h>
 
 struct patch_insn {
 	void *addr;
@@ -25,6 +26,14 @@ struct patch_insn {
 int riscv_patch_in_stop_machine = false;
 
 #ifdef CONFIG_MMU
+
+static inline bool is_kernel_exittext(uintptr_t addr)
+{
+	return system_state < SYSTEM_RUNNING &&
+		addr >= (uintptr_t)__exittext_begin &&
+		addr < (uintptr_t)__exittext_end;
+}
+
 /*
  * The fix_to_virt(, idx) needs a const value (not a dynamic variable of
  * reg-a0) or BUILD_BUG_ON failed with "idx >= __end_of_fixed_addresses".
@@ -35,7 +44,7 @@ static __always_inline void *patch_map(void *addr, const unsigned int fixmap)
 	uintptr_t uintaddr = (uintptr_t) addr;
 	struct page *page;
 
-	if (core_kernel_text(uintaddr))
+	if (core_kernel_text(uintaddr) || is_kernel_exittext(uintaddr))
 		page = phys_to_page(__pa_symbol(addr));
 	else if (IS_ENABLED(CONFIG_STRICT_MODULE_RWX))
 		page = vmalloc_to_page(addr);
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/pi/cmdline_early.c linux-libre-6.8-gnu/arch/riscv/kernel/pi/cmdline_early.c
index 68e786c84c94..f6d4dedffb84 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/pi/cmdline_early.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/pi/cmdline_early.c
@@ -38,8 +38,7 @@ static char *get_early_cmdline(uintptr_t dtb_pa)
 	if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) ||
 	    IS_ENABLED(CONFIG_CMDLINE_FORCE) ||
 	    fdt_cmdline_size == 0 /* CONFIG_CMDLINE_FALLBACK */) {
-		strncat(early_cmdline, CONFIG_CMDLINE,
-			COMMAND_LINE_SIZE - fdt_cmdline_size);
+		strlcat(early_cmdline, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
 	}
 
 	return early_cmdline;
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/process.c linux-libre-6.8-gnu/arch/riscv/kernel/process.c
index 4f21d970a129..92922dbd5b5c 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/process.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/process.c
@@ -171,6 +171,7 @@ void flush_thread(void)
 	riscv_v_vstate_off(task_pt_regs(current));
 	kfree(current->thread.vstate.datap);
 	memset(&current->thread.vstate, 0, sizeof(struct __riscv_v_ext_state));
+	clear_tsk_thread_flag(current, TIF_RISCV_V_DEFER_RESTORE);
 #endif
 }
 
@@ -178,7 +179,7 @@ void arch_release_task_struct(struct task_struct *tsk)
 {
 	/* Free the vector context of datap. */
 	if (has_vector())
-		kfree(tsk->thread.vstate.datap);
+		riscv_v_thread_free(tsk);
 }
 
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
@@ -187,6 +188,8 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	*dst = *src;
 	/* clear entire V context, including datap for a new task */
 	memset(&dst->thread.vstate, 0, sizeof(struct __riscv_v_ext_state));
+	memset(&dst->thread.kernel_vstate, 0, sizeof(struct __riscv_v_ext_state));
+	clear_tsk_thread_flag(dst, TIF_RISCV_V_DEFER_RESTORE);
 
 	return 0;
 }
@@ -221,7 +224,15 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 		childregs->a0 = 0; /* Return value of fork() */
 		p->thread.s[0] = 0;
 	}
+	p->thread.riscv_v_flags = 0;
+	if (has_vector())
+		riscv_v_thread_alloc(p);
 	p->thread.ra = (unsigned long)ret_from_fork;
 	p->thread.sp = (unsigned long)childregs; /* kernel sp */
 	return 0;
 }
+
+void __init arch_task_cache_init(void)
+{
+	riscv_v_setup_ctx_cache();
+}
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/ptrace.c linux-libre-6.8-gnu/arch/riscv/kernel/ptrace.c
index 2afe460de16a..e8515aa9d80b 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/ptrace.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/ptrace.c
@@ -99,8 +99,11 @@ static int riscv_vr_get(struct task_struct *target,
 	 * Ensure the vector registers have been saved to the memory before
 	 * copying them to membuf.
 	 */
-	if (target == current)
-		riscv_v_vstate_save(current, task_pt_regs(current));
+	if (target == current) {
+		get_cpu_vector_context();
+		riscv_v_vstate_save(&current->thread.vstate, task_pt_regs(current));
+		put_cpu_vector_context();
+	}
 
 	ptrace_vstate.vstart = vstate->vstart;
 	ptrace_vstate.vl = vstate->vl;
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/return_address.c linux-libre-6.8-gnu/arch/riscv/kernel/return_address.c
new file mode 100644
index 000000000000..c8115ec8fb30
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/kernel/return_address.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This code come from arch/arm64/kernel/return_address.c
+ *
+ * Copyright (C) 2023 SiFive.
+ */
+
+#include <linux/export.h>
+#include <linux/kprobes.h>
+#include <linux/stacktrace.h>
+
+struct return_address_data {
+	unsigned int level;
+	void *addr;
+};
+
+static bool save_return_addr(void *d, unsigned long pc)
+{
+	struct return_address_data *data = d;
+
+	if (!data->level) {
+		data->addr = (void *)pc;
+		return false;
+	}
+
+	--data->level;
+
+	return true;
+}
+NOKPROBE_SYMBOL(save_return_addr);
+
+noinline void *return_address(unsigned int level)
+{
+	struct return_address_data data;
+
+	data.level = level + 3;
+	data.addr = NULL;
+
+	arch_stack_walk(save_return_addr, &data, current, NULL);
+
+	if (!data.level)
+		return data.addr;
+	else
+		return NULL;
+
+}
+EXPORT_SYMBOL_GPL(return_address);
+NOKPROBE_SYMBOL(return_address);
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/sbi.c linux-libre-6.8-gnu/arch/riscv/kernel/sbi.c
index 5a62ed1da453..e66e0999a800 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/sbi.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/sbi.c
@@ -7,6 +7,7 @@
 
 #include <linux/bits.h>
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <linux/pm.h>
 #include <linux/reboot.h>
 #include <asm/sbi.h>
@@ -571,6 +572,66 @@ long sbi_get_mimpid(void)
 }
 EXPORT_SYMBOL_GPL(sbi_get_mimpid);
 
+bool sbi_debug_console_available;
+
+int sbi_debug_console_write(const char *bytes, unsigned int num_bytes)
+{
+	phys_addr_t base_addr;
+	struct sbiret ret;
+
+	if (!sbi_debug_console_available)
+		return -EOPNOTSUPP;
+
+	if (is_vmalloc_addr(bytes))
+		base_addr = page_to_phys(vmalloc_to_page(bytes)) +
+			    offset_in_page(bytes);
+	else
+		base_addr = __pa(bytes);
+	if (PAGE_SIZE < (offset_in_page(bytes) + num_bytes))
+		num_bytes = PAGE_SIZE - offset_in_page(bytes);
+
+	if (IS_ENABLED(CONFIG_32BIT))
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
+				num_bytes, lower_32_bits(base_addr),
+				upper_32_bits(base_addr), 0, 0, 0);
+	else
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
+				num_bytes, base_addr, 0, 0, 0, 0);
+
+	if (ret.error == SBI_ERR_FAILURE)
+		return -EIO;
+	return ret.error ? sbi_err_map_linux_errno(ret.error) : ret.value;
+}
+
+int sbi_debug_console_read(char *bytes, unsigned int num_bytes)
+{
+	phys_addr_t base_addr;
+	struct sbiret ret;
+
+	if (!sbi_debug_console_available)
+		return -EOPNOTSUPP;
+
+	if (is_vmalloc_addr(bytes))
+		base_addr = page_to_phys(vmalloc_to_page(bytes)) +
+			    offset_in_page(bytes);
+	else
+		base_addr = __pa(bytes);
+	if (PAGE_SIZE < (offset_in_page(bytes) + num_bytes))
+		num_bytes = PAGE_SIZE - offset_in_page(bytes);
+
+	if (IS_ENABLED(CONFIG_32BIT))
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
+				num_bytes, lower_32_bits(base_addr),
+				upper_32_bits(base_addr), 0, 0, 0);
+	else
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
+				num_bytes, base_addr, 0, 0, 0, 0);
+
+	if (ret.error == SBI_ERR_FAILURE)
+		return -EIO;
+	return ret.error ? sbi_err_map_linux_errno(ret.error) : ret.value;
+}
+
 void __init sbi_init(void)
 {
 	int ret;
@@ -612,6 +673,11 @@ void __init sbi_init(void)
 			sbi_srst_reboot_nb.priority = 192;
 			register_restart_handler(&sbi_srst_reboot_nb);
 		}
+		if ((sbi_spec_version >= sbi_mk_version(2, 0)) &&
+		    (sbi_probe_extension(SBI_EXT_DBCN) > 0)) {
+			pr_info("SBI DBCN extension detected\n");
+			sbi_debug_console_available = true;
+		}
 	} else {
 		__sbi_set_timer = __sbi_set_timer_v01;
 		__sbi_send_ipi	= __sbi_send_ipi_v01;
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/setup.c linux-libre-6.8-gnu/arch/riscv/kernel/setup.c
index 535a837de55d..4f73c0ae44b2 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/setup.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/setup.c
@@ -26,7 +26,6 @@
 #include <asm/alternative.h>
 #include <asm/cacheflush.h>
 #include <asm/cpufeature.h>
-#include <asm/cpu_ops.h>
 #include <asm/early_ioremap.h>
 #include <asm/pgtable.h>
 #include <asm/setup.h>
@@ -51,7 +50,6 @@ atomic_t hart_lottery __section(".sdata")
 #endif
 ;
 unsigned long boot_cpu_hartid;
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
 /*
  * Place kernel memory regions on the resource tree so that
@@ -299,23 +297,10 @@ void __init setup_arch(char **cmdline_p)
 	riscv_user_isa_enable();
 }
 
-static int __init topology_init(void)
+bool arch_cpu_is_hotpluggable(int cpu)
 {
-	int i, ret;
-
-	for_each_possible_cpu(i) {
-		struct cpu *cpu = &per_cpu(cpu_devices, i);
-
-		cpu->hotpluggable = cpu_has_hotplug(i);
-		ret = register_cpu(cpu, i);
-		if (unlikely(ret))
-			pr_warn("Warning: %s: register_cpu %d failed (%d)\n",
-			       __func__, i, ret);
-	}
-
-	return 0;
+	return cpu_has_hotplug(cpu);
 }
-subsys_initcall(topology_init);
 
 void free_initmem(void)
 {
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/signal.c linux-libre-6.8-gnu/arch/riscv/kernel/signal.c
index 88b6220b2608..501e66debf69 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/signal.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/signal.c
@@ -86,12 +86,15 @@ static long save_v_state(struct pt_regs *regs, void __user **sc_vec)
 	/* datap is designed to be 16 byte aligned for better performance */
 	WARN_ON(unlikely(!IS_ALIGNED((unsigned long)datap, 16)));
 
-	riscv_v_vstate_save(current, regs);
+	get_cpu_vector_context();
+	riscv_v_vstate_save(&current->thread.vstate, regs);
+	put_cpu_vector_context();
+
 	/* Copy everything of vstate but datap. */
 	err = __copy_to_user(&state->v_state, &current->thread.vstate,
 			     offsetof(struct __riscv_v_ext_state, datap));
 	/* Copy the pointer datap itself. */
-	err |= __put_user(datap, &state->v_state.datap);
+	err |= __put_user((__force void *)datap, &state->v_state.datap);
 	/* Copy the whole vector content to user space datap. */
 	err |= __copy_to_user(datap, current->thread.vstate.datap, riscv_v_vsize);
 	/* Copy magic to the user space after saving  all vector conetext */
@@ -134,7 +137,7 @@ static long __restore_v_state(struct pt_regs *regs, void __user *sc_vec)
 	if (unlikely(err))
 		return err;
 
-	riscv_v_vstate_restore(current, regs);
+	riscv_v_vstate_set_restore(current, regs);
 
 	return err;
 }
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/smp.c linux-libre-6.8-gnu/arch/riscv/kernel/smp.c
index 40420afbb1a0..45dd4035416e 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/smp.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/smp.c
@@ -81,7 +81,7 @@ static inline void ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs)
 
 #ifdef CONFIG_HOTPLUG_CPU
 	if (cpu_has_hotplug(cpu))
-		cpu_ops[cpu]->cpu_stop();
+		cpu_ops->cpu_stop();
 #endif
 
 	for(;;)
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/smpboot.c linux-libre-6.8-gnu/arch/riscv/kernel/smpboot.c
index d162bf339beb..519b6bd946e5 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/smpboot.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/smpboot.c
@@ -49,7 +49,6 @@ void __init smp_prepare_boot_cpu(void)
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	int cpuid;
-	int ret;
 	unsigned int curr_cpuid;
 
 	init_cpu_topology();
@@ -66,11 +65,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for_each_possible_cpu(cpuid) {
 		if (cpuid == curr_cpuid)
 			continue;
-		if (cpu_ops[cpuid]->cpu_prepare) {
-			ret = cpu_ops[cpuid]->cpu_prepare(cpuid);
-			if (ret)
-				continue;
-		}
 		set_cpu_present(cpuid, true);
 		numa_store_cpu_info(cpuid);
 	}
@@ -125,18 +119,7 @@ static int __init acpi_parse_rintc(union acpi_subtable_headers *header, const un
 
 static void __init acpi_parse_and_init_cpus(void)
 {
-	int cpuid;
-
-	cpu_set_ops(0);
-
 	acpi_table_parse_madt(ACPI_MADT_TYPE_RINTC, acpi_parse_rintc, 0);
-
-	for (cpuid = 1; cpuid < nr_cpu_ids; cpuid++) {
-		if (cpuid_to_hartid_map(cpuid) != INVALID_HARTID) {
-			cpu_set_ops(cpuid);
-			set_cpu_possible(cpuid, true);
-		}
-	}
 }
 #else
 #define acpi_parse_and_init_cpus(...)	do { } while (0)
@@ -150,8 +133,6 @@ static void __init of_parse_and_init_cpus(void)
 	int cpuid = 1;
 	int rc;
 
-	cpu_set_ops(0);
-
 	for_each_of_cpu_node(dn) {
 		rc = riscv_early_of_processor_hartid(dn, &hart);
 		if (rc < 0)
@@ -179,27 +160,28 @@ static void __init of_parse_and_init_cpus(void)
 	if (cpuid > nr_cpu_ids)
 		pr_warn("Total number of cpus [%d] is greater than nr_cpus option value [%d]\n",
 			cpuid, nr_cpu_ids);
-
-	for (cpuid = 1; cpuid < nr_cpu_ids; cpuid++) {
-		if (cpuid_to_hartid_map(cpuid) != INVALID_HARTID) {
-			cpu_set_ops(cpuid);
-			set_cpu_possible(cpuid, true);
-		}
-	}
 }
 
 void __init setup_smp(void)
 {
+	int cpuid;
+
+	cpu_set_ops();
+
 	if (acpi_disabled)
 		of_parse_and_init_cpus();
 	else
 		acpi_parse_and_init_cpus();
+
+	for (cpuid = 1; cpuid < nr_cpu_ids; cpuid++)
+		if (cpuid_to_hartid_map(cpuid) != INVALID_HARTID)
+			set_cpu_possible(cpuid, true);
 }
 
 static int start_secondary_cpu(int cpu, struct task_struct *tidle)
 {
-	if (cpu_ops[cpu]->cpu_start)
-		return cpu_ops[cpu]->cpu_start(cpu, tidle);
+	if (cpu_ops->cpu_start)
+		return cpu_ops->cpu_start(cpu, tidle);
 
 	return -EOPNOTSUPP;
 }
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/suspend.c linux-libre-6.8-gnu/arch/riscv/kernel/suspend.c
index 3c89b8ec69c4..299795341e8a 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/suspend.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/suspend.c
@@ -4,13 +4,19 @@
  * Copyright (c) 2022 Ventana Micro Systems Inc.
  */
 
+#define pr_fmt(fmt) "suspend: " fmt
+
 #include <linux/ftrace.h>
+#include <linux/suspend.h>
 #include <asm/csr.h>
+#include <asm/sbi.h>
 #include <asm/suspend.h>
 
 void suspend_save_csrs(struct suspend_context *context)
 {
 	context->scratch = csr_read(CSR_SCRATCH);
+	if (riscv_cpu_has_extension_unlikely(smp_processor_id(), RISCV_ISA_EXT_XLINUXENVCFG))
+		context->envcfg = csr_read(CSR_ENVCFG);
 	context->tvec = csr_read(CSR_TVEC);
 	context->ie = csr_read(CSR_IE);
 
@@ -32,6 +38,8 @@ void suspend_save_csrs(struct suspend_context *context)
 void suspend_restore_csrs(struct suspend_context *context)
 {
 	csr_write(CSR_SCRATCH, context->scratch);
+	if (riscv_cpu_has_extension_unlikely(smp_processor_id(), RISCV_ISA_EXT_XLINUXENVCFG))
+		csr_write(CSR_ENVCFG, context->envcfg);
 	csr_write(CSR_TVEC, context->tvec);
 	csr_write(CSR_IE, context->ie);
 
@@ -85,3 +93,43 @@ int cpu_suspend(unsigned long arg,
 
 	return rc;
 }
+
+#ifdef CONFIG_RISCV_SBI
+static int sbi_system_suspend(unsigned long sleep_type,
+			      unsigned long resume_addr,
+			      unsigned long opaque)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_SUSP, SBI_EXT_SUSP_SYSTEM_SUSPEND,
+			sleep_type, resume_addr, opaque, 0, 0, 0);
+	if (ret.error)
+		return sbi_err_map_linux_errno(ret.error);
+
+	return ret.value;
+}
+
+static int sbi_system_suspend_enter(suspend_state_t state)
+{
+	return cpu_suspend(SBI_SUSP_SLEEP_TYPE_SUSPEND_TO_RAM, sbi_system_suspend);
+}
+
+static const struct platform_suspend_ops sbi_system_suspend_ops = {
+	.valid = suspend_valid_only_mem,
+	.enter = sbi_system_suspend_enter,
+};
+
+static int __init sbi_system_suspend_init(void)
+{
+	if (sbi_spec_version >= sbi_mk_version(2, 0) &&
+	    sbi_probe_extension(SBI_EXT_SUSP) > 0) {
+		pr_info("SBI SUSP extension detected\n");
+		if (IS_ENABLED(CONFIG_SUSPEND))
+			suspend_set_ops(&sbi_system_suspend_ops);
+	}
+
+	return 0;
+}
+
+arch_initcall(sbi_system_suspend_init);
+#endif /* CONFIG_RISCV_SBI */
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/sys_hwprobe.c linux-libre-6.8-gnu/arch/riscv/kernel/sys_hwprobe.c
new file mode 100644
index 000000000000..a7c56b41efd2
--- /dev/null
+++ linux-libre-6.8-gnu/arch/riscv/kernel/sys_hwprobe.c
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * The hwprobe interface, for allowing userspace to probe to see which features
+ * are supported by the hardware.  See Documentation/arch/riscv/hwprobe.rst for
+ * more details.
+ */
+#include <linux/syscalls.h>
+#include <asm/cacheflush.h>
+#include <asm/cpufeature.h>
+#include <asm/hwprobe.h>
+#include <asm/sbi.h>
+#include <asm/switch_to.h>
+#include <asm/uaccess.h>
+#include <asm/unistd.h>
+#include <asm/vector.h>
+#include <vdso/vsyscall.h>
+
+
+static void hwprobe_arch_id(struct riscv_hwprobe *pair,
+			    const struct cpumask *cpus)
+{
+	u64 id = -1ULL;
+	bool first = true;
+	int cpu;
+
+	for_each_cpu(cpu, cpus) {
+		u64 cpu_id;
+
+		switch (pair->key) {
+		case RISCV_HWPROBE_KEY_MVENDORID:
+			cpu_id = riscv_cached_mvendorid(cpu);
+			break;
+		case RISCV_HWPROBE_KEY_MIMPID:
+			cpu_id = riscv_cached_mimpid(cpu);
+			break;
+		case RISCV_HWPROBE_KEY_MARCHID:
+			cpu_id = riscv_cached_marchid(cpu);
+			break;
+		}
+
+		if (first) {
+			id = cpu_id;
+			first = false;
+		}
+
+		/*
+		 * If there's a mismatch for the given set, return -1 in the
+		 * value.
+		 */
+		if (id != cpu_id) {
+			id = -1ULL;
+			break;
+		}
+	}
+
+	pair->value = id;
+}
+
+static void hwprobe_isa_ext0(struct riscv_hwprobe *pair,
+			     const struct cpumask *cpus)
+{
+	int cpu;
+	u64 missing = 0;
+
+	pair->value = 0;
+	if (has_fpu())
+		pair->value |= RISCV_HWPROBE_IMA_FD;
+
+	if (riscv_isa_extension_available(NULL, c))
+		pair->value |= RISCV_HWPROBE_IMA_C;
+
+	if (has_vector())
+		pair->value |= RISCV_HWPROBE_IMA_V;
+
+	/*
+	 * Loop through and record extensions that 1) anyone has, and 2) anyone
+	 * doesn't have.
+	 */
+	for_each_cpu(cpu, cpus) {
+		struct riscv_isainfo *isainfo = &hart_isa[cpu];
+
+#define EXT_KEY(ext)									\
+	do {										\
+		if (__riscv_isa_extension_available(isainfo->isa, RISCV_ISA_EXT_##ext))	\
+			pair->value |= RISCV_HWPROBE_EXT_##ext;				\
+		else									\
+			missing |= RISCV_HWPROBE_EXT_##ext;				\
+	} while (false)
+
+		/*
+		 * Only use EXT_KEY() for extensions which can be exposed to userspace,
+		 * regardless of the kernel's configuration, as no other checks, besides
+		 * presence in the hart_isa bitmap, are made.
+		 */
+		EXT_KEY(ZBA);
+		EXT_KEY(ZBB);
+		EXT_KEY(ZBS);
+		EXT_KEY(ZICBOZ);
+		EXT_KEY(ZBC);
+
+		EXT_KEY(ZBKB);
+		EXT_KEY(ZBKC);
+		EXT_KEY(ZBKX);
+		EXT_KEY(ZKND);
+		EXT_KEY(ZKNE);
+		EXT_KEY(ZKNH);
+		EXT_KEY(ZKSED);
+		EXT_KEY(ZKSH);
+		EXT_KEY(ZKT);
+		EXT_KEY(ZIHINTNTL);
+		EXT_KEY(ZTSO);
+		EXT_KEY(ZACAS);
+		EXT_KEY(ZICOND);
+
+		if (has_vector()) {
+			EXT_KEY(ZVBB);
+			EXT_KEY(ZVBC);
+			EXT_KEY(ZVKB);
+			EXT_KEY(ZVKG);
+			EXT_KEY(ZVKNED);
+			EXT_KEY(ZVKNHA);
+			EXT_KEY(ZVKNHB);
+			EXT_KEY(ZVKSED);
+			EXT_KEY(ZVKSH);
+			EXT_KEY(ZVKT);
+			EXT_KEY(ZVFH);
+			EXT_KEY(ZVFHMIN);
+		}
+
+		if (has_fpu()) {
+			EXT_KEY(ZFH);
+			EXT_KEY(ZFHMIN);
+			EXT_KEY(ZFA);
+		}
+#undef EXT_KEY
+	}
+
+	/* Now turn off reporting features if any CPU is missing it. */
+	pair->value &= ~missing;
+}
+
+static bool hwprobe_ext0_has(const struct cpumask *cpus, unsigned long ext)
+{
+	struct riscv_hwprobe pair;
+
+	hwprobe_isa_ext0(&pair, cpus);
+	return (pair.value & ext);
+}
+
+static u64 hwprobe_misaligned(const struct cpumask *cpus)
+{
+	int cpu;
+	u64 perf = -1ULL;
+
+	for_each_cpu(cpu, cpus) {
+		int this_perf = per_cpu(misaligned_access_speed, cpu);
+
+		if (perf == -1ULL)
+			perf = this_perf;
+
+		if (perf != this_perf) {
+			perf = RISCV_HWPROBE_MISALIGNED_UNKNOWN;
+			break;
+		}
+	}
+
+	if (perf == -1ULL)
+		return RISCV_HWPROBE_MISALIGNED_UNKNOWN;
+
+	return perf;
+}
+
+static void hwprobe_one_pair(struct riscv_hwprobe *pair,
+			     const struct cpumask *cpus)
+{
+	switch (pair->key) {
+	case RISCV_HWPROBE_KEY_MVENDORID:
+	case RISCV_HWPROBE_KEY_MARCHID:
+	case RISCV_HWPROBE_KEY_MIMPID:
+		hwprobe_arch_id(pair, cpus);
+		break;
+	/*
+	 * The kernel already assumes that the base single-letter ISA
+	 * extensions are supported on all harts, and only supports the
+	 * IMA base, so just cheat a bit here and tell that to
+	 * userspace.
+	 */
+	case RISCV_HWPROBE_KEY_BASE_BEHAVIOR:
+		pair->value = RISCV_HWPROBE_BASE_BEHAVIOR_IMA;
+		break;
+
+	case RISCV_HWPROBE_KEY_IMA_EXT_0:
+		hwprobe_isa_ext0(pair, cpus);
+		break;
+
+	case RISCV_HWPROBE_KEY_CPUPERF_0:
+		pair->value = hwprobe_misaligned(cpus);
+		break;
+
+	case RISCV_HWPROBE_KEY_ZICBOZ_BLOCK_SIZE:
+		pair->value = 0;
+		if (hwprobe_ext0_has(cpus, RISCV_HWPROBE_EXT_ZICBOZ))
+			pair->value = riscv_cboz_block_size;
+		break;
+
+	/*
+	 * For forward compatibility, unknown keys don't fail the whole
+	 * call, but get their element key set to -1 and value set to 0
+	 * indicating they're unrecognized.
+	 */
+	default:
+		pair->key = -1;
+		pair->value = 0;
+		break;
+	}
+}
+
+static int hwprobe_get_values(struct riscv_hwprobe __user *pairs,
+			      size_t pair_count, size_t cpusetsize,
+			      unsigned long __user *cpus_user,
+			      unsigned int flags)
+{
+	size_t out;
+	int ret;
+	cpumask_t cpus;
+
+	/* Check the reserved flags. */
+	if (flags != 0)
+		return -EINVAL;
+
+	/*
+	 * The interface supports taking in a CPU mask, and returns values that
+	 * are consistent across that mask. Allow userspace to specify NULL and
+	 * 0 as a shortcut to all online CPUs.
+	 */
+	cpumask_clear(&cpus);
+	if (!cpusetsize && !cpus_user) {
+		cpumask_copy(&cpus, cpu_online_mask);
+	} else {
+		if (cpusetsize > cpumask_size())
+			cpusetsize = cpumask_size();
+
+		ret = copy_from_user(&cpus, cpus_user, cpusetsize);
+		if (ret)
+			return -EFAULT;
+
+		/*
+		 * Userspace must provide at least one online CPU, without that
+		 * there's no way to define what is supported.
+		 */
+		cpumask_and(&cpus, &cpus, cpu_online_mask);
+		if (cpumask_empty(&cpus))
+			return -EINVAL;
+	}
+
+	for (out = 0; out < pair_count; out++, pairs++) {
+		struct riscv_hwprobe pair;
+
+		if (get_user(pair.key, &pairs->key))
+			return -EFAULT;
+
+		pair.value = 0;
+		hwprobe_one_pair(&pair, &cpus);
+		ret = put_user(pair.key, &pairs->key);
+		if (ret == 0)
+			ret = put_user(pair.value, &pairs->value);
+
+		if (ret)
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int hwprobe_get_cpus(struct riscv_hwprobe __user *pairs,
+			    size_t pair_count, size_t cpusetsize,
+			    unsigned long __user *cpus_user,
+			    unsigned int flags)
+{
+	cpumask_t cpus, one_cpu;
+	bool clear_all = false;
+	size_t i;
+	int ret;
+
+	if (flags != RISCV_HWPROBE_WHICH_CPUS)
+		return -EINVAL;
+
+	if (!cpusetsize || !cpus_user)
+		return -EINVAL;
+
+	if (cpusetsize > cpumask_size())
+		cpusetsize = cpumask_size();
+
+	ret = copy_from_user(&cpus, cpus_user, cpusetsize);
+	if (ret)
+		return -EFAULT;
+
+	if (cpumask_empty(&cpus))
+		cpumask_copy(&cpus, cpu_online_mask);
+
+	cpumask_and(&cpus, &cpus, cpu_online_mask);
+
+	cpumask_clear(&one_cpu);
+
+	for (i = 0; i < pair_count; i++) {
+		struct riscv_hwprobe pair, tmp;
+		int cpu;
+
+		ret = copy_from_user(&pair, &pairs[i], sizeof(pair));
+		if (ret)
+			return -EFAULT;
+
+		if (!riscv_hwprobe_key_is_valid(pair.key)) {
+			clear_all = true;
+			pair = (struct riscv_hwprobe){ .key = -1, };
+			ret = copy_to_user(&pairs[i], &pair, sizeof(pair));
+			if (ret)
+				return -EFAULT;
+		}
+
+		if (clear_all)
+			continue;
+
+		tmp = (struct riscv_hwprobe){ .key = pair.key, };
+
+		for_each_cpu(cpu, &cpus) {
+			cpumask_set_cpu(cpu, &one_cpu);
+
+			hwprobe_one_pair(&tmp, &one_cpu);
+
+			if (!riscv_hwprobe_pair_cmp(&tmp, &pair))
+				cpumask_clear_cpu(cpu, &cpus);
+
+			cpumask_clear_cpu(cpu, &one_cpu);
+		}
+	}
+
+	if (clear_all)
+		cpumask_clear(&cpus);
+
+	ret = copy_to_user(cpus_user, &cpus, cpusetsize);
+	if (ret)
+		return -EFAULT;
+
+	return 0;
+}
+
+static int do_riscv_hwprobe(struct riscv_hwprobe __user *pairs,
+			    size_t pair_count, size_t cpusetsize,
+			    unsigned long __user *cpus_user,
+			    unsigned int flags)
+{
+	if (flags & RISCV_HWPROBE_WHICH_CPUS)
+		return hwprobe_get_cpus(pairs, pair_count, cpusetsize,
+					cpus_user, flags);
+
+	return hwprobe_get_values(pairs, pair_count, cpusetsize,
+				  cpus_user, flags);
+}
+
+#ifdef CONFIG_MMU
+
+static int __init init_hwprobe_vdso_data(void)
+{
+	struct vdso_data *vd = __arch_get_k_vdso_data();
+	struct arch_vdso_data *avd = &vd->arch_data;
+	u64 id_bitsmash = 0;
+	struct riscv_hwprobe pair;
+	int key;
+
+	/*
+	 * Initialize vDSO data with the answers for the "all CPUs" case, to
+	 * save a syscall in the common case.
+	 */
+	for (key = 0; key <= RISCV_HWPROBE_MAX_KEY; key++) {
+		pair.key = key;
+		hwprobe_one_pair(&pair, cpu_online_mask);
+
+		WARN_ON_ONCE(pair.key < 0);
+
+		avd->all_cpu_hwprobe_values[key] = pair.value;
+		/*
+		 * Smash together the vendor, arch, and impl IDs to see if
+		 * they're all 0 or any negative.
+		 */
+		if (key <= RISCV_HWPROBE_KEY_MIMPID)
+			id_bitsmash |= pair.value;
+	}
+
+	/*
+	 * If the arch, vendor, and implementation ID are all the same across
+	 * all harts, then assume all CPUs are the same, and allow the vDSO to
+	 * answer queries for arbitrary masks. However if all values are 0 (not
+	 * populated) or any value returns -1 (varies across CPUs), then the
+	 * vDSO should defer to the kernel for exotic cpu masks.
+	 */
+	avd->homogeneous_cpus = id_bitsmash != 0 && id_bitsmash != -1;
+	return 0;
+}
+
+arch_initcall_sync(init_hwprobe_vdso_data);
+
+#endif /* CONFIG_MMU */
+
+SYSCALL_DEFINE5(riscv_hwprobe, struct riscv_hwprobe __user *, pairs,
+		size_t, pair_count, size_t, cpusetsize, unsigned long __user *,
+		cpus, unsigned int, flags)
+{
+	return do_riscv_hwprobe(pairs, pair_count, cpusetsize,
+				cpus, flags);
+}
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/sys_riscv.c linux-libre-6.8-gnu/arch/riscv/kernel/sys_riscv.c
index a2ca5b7756a5..f1c1416a9f1e 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/sys_riscv.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/sys_riscv.c
@@ -7,15 +7,7 @@
 
 #include <linux/syscalls.h>
 #include <asm/cacheflush.h>
-#include <asm/cpufeature.h>
-#include <asm/hwprobe.h>
-#include <asm/sbi.h>
-#include <asm/vector.h>
-#include <asm/switch_to.h>
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
 #include <asm-generic/mman-common.h>
-#include <vdso/vsyscall.h>
 
 static long riscv_sys_mmap(unsigned long addr, unsigned long len,
 			   unsigned long prot, unsigned long flags,
@@ -77,283 +69,6 @@ SYSCALL_DEFINE3(riscv_flush_icache, uintptr_t, start, uintptr_t, end,
 	return 0;
 }
 
-/*
- * The hwprobe interface, for allowing userspace to probe to see which features
- * are supported by the hardware.  See Documentation/arch/riscv/hwprobe.rst for more
- * details.
- */
-static void hwprobe_arch_id(struct riscv_hwprobe *pair,
-			    const struct cpumask *cpus)
-{
-	u64 id = -1ULL;
-	bool first = true;
-	int cpu;
-
-	for_each_cpu(cpu, cpus) {
-		u64 cpu_id;
-
-		switch (pair->key) {
-		case RISCV_HWPROBE_KEY_MVENDORID:
-			cpu_id = riscv_cached_mvendorid(cpu);
-			break;
-		case RISCV_HWPROBE_KEY_MIMPID:
-			cpu_id = riscv_cached_mimpid(cpu);
-			break;
-		case RISCV_HWPROBE_KEY_MARCHID:
-			cpu_id = riscv_cached_marchid(cpu);
-			break;
-		}
-
-		if (first) {
-			id = cpu_id;
-			first = false;
-		}
-
-		/*
-		 * If there's a mismatch for the given set, return -1 in the
-		 * value.
-		 */
-		if (id != cpu_id) {
-			id = -1ULL;
-			break;
-		}
-	}
-
-	pair->value = id;
-}
-
-static void hwprobe_isa_ext0(struct riscv_hwprobe *pair,
-			     const struct cpumask *cpus)
-{
-	int cpu;
-	u64 missing = 0;
-
-	pair->value = 0;
-	if (has_fpu())
-		pair->value |= RISCV_HWPROBE_IMA_FD;
-
-	if (riscv_isa_extension_available(NULL, c))
-		pair->value |= RISCV_HWPROBE_IMA_C;
-
-	if (has_vector())
-		pair->value |= RISCV_HWPROBE_IMA_V;
-
-	/*
-	 * Loop through and record extensions that 1) anyone has, and 2) anyone
-	 * doesn't have.
-	 */
-	for_each_cpu(cpu, cpus) {
-		struct riscv_isainfo *isainfo = &hart_isa[cpu];
-
-#define EXT_KEY(ext)									\
-	do {										\
-		if (__riscv_isa_extension_available(isainfo->isa, RISCV_ISA_EXT_##ext))	\
-			pair->value |= RISCV_HWPROBE_EXT_##ext;				\
-		else									\
-			missing |= RISCV_HWPROBE_EXT_##ext;				\
-	} while (false)
-
-		/*
-		 * Only use EXT_KEY() for extensions which can be exposed to userspace,
-		 * regardless of the kernel's configuration, as no other checks, besides
-		 * presence in the hart_isa bitmap, are made.
-		 */
-		EXT_KEY(ZBA);
-		EXT_KEY(ZBB);
-		EXT_KEY(ZBS);
-		EXT_KEY(ZICBOZ);
-#undef EXT_KEY
-	}
-
-	/* Now turn off reporting features if any CPU is missing it. */
-	pair->value &= ~missing;
-}
-
-static bool hwprobe_ext0_has(const struct cpumask *cpus, u64 ext)
-{
-	struct riscv_hwprobe pair;
-
-	hwprobe_isa_ext0(&pair, cpus);
-	return (pair.value & ext);
-}
-
-static u64 hwprobe_misaligned(const struct cpumask *cpus)
-{
-	int cpu;
-	u64 perf = -1ULL;
-
-	for_each_cpu(cpu, cpus) {
-		int this_perf = per_cpu(misaligned_access_speed, cpu);
-
-		if (perf == -1ULL)
-			perf = this_perf;
-
-		if (perf != this_perf) {
-			perf = RISCV_HWPROBE_MISALIGNED_UNKNOWN;
-			break;
-		}
-	}
-
-	if (perf == -1ULL)
-		return RISCV_HWPROBE_MISALIGNED_UNKNOWN;
-
-	return perf;
-}
-
-static void hwprobe_one_pair(struct riscv_hwprobe *pair,
-			     const struct cpumask *cpus)
-{
-	switch (pair->key) {
-	case RISCV_HWPROBE_KEY_MVENDORID:
-	case RISCV_HWPROBE_KEY_MARCHID:
-	case RISCV_HWPROBE_KEY_MIMPID:
-		hwprobe_arch_id(pair, cpus);
-		break;
-	/*
-	 * The kernel already assumes that the base single-letter ISA
-	 * extensions are supported on all harts, and only supports the
-	 * IMA base, so just cheat a bit here and tell that to
-	 * userspace.
-	 */
-	case RISCV_HWPROBE_KEY_BASE_BEHAVIOR:
-		pair->value = RISCV_HWPROBE_BASE_BEHAVIOR_IMA;
-		break;
-
-	case RISCV_HWPROBE_KEY_IMA_EXT_0:
-		hwprobe_isa_ext0(pair, cpus);
-		break;
-
-	case RISCV_HWPROBE_KEY_CPUPERF_0:
-		pair->value = hwprobe_misaligned(cpus);
-		break;
-
-	case RISCV_HWPROBE_KEY_ZICBOZ_BLOCK_SIZE:
-		pair->value = 0;
-		if (hwprobe_ext0_has(cpus, RISCV_HWPROBE_EXT_ZICBOZ))
-			pair->value = riscv_cboz_block_size;
-		break;
-
-	/*
-	 * For forward compatibility, unknown keys don't fail the whole
-	 * call, but get their element key set to -1 and value set to 0
-	 * indicating they're unrecognized.
-	 */
-	default:
-		pair->key = -1;
-		pair->value = 0;
-		break;
-	}
-}
-
-static int do_riscv_hwprobe(struct riscv_hwprobe __user *pairs,
-			    size_t pair_count, size_t cpu_count,
-			    unsigned long __user *cpus_user,
-			    unsigned int flags)
-{
-	size_t out;
-	int ret;
-	cpumask_t cpus;
-
-	/* Check the reserved flags. */
-	if (flags != 0)
-		return -EINVAL;
-
-	/*
-	 * The interface supports taking in a CPU mask, and returns values that
-	 * are consistent across that mask. Allow userspace to specify NULL and
-	 * 0 as a shortcut to all online CPUs.
-	 */
-	cpumask_clear(&cpus);
-	if (!cpu_count && !cpus_user) {
-		cpumask_copy(&cpus, cpu_online_mask);
-	} else {
-		if (cpu_count > cpumask_size())
-			cpu_count = cpumask_size();
-
-		ret = copy_from_user(&cpus, cpus_user, cpu_count);
-		if (ret)
-			return -EFAULT;
-
-		/*
-		 * Userspace must provide at least one online CPU, without that
-		 * there's no way to define what is supported.
-		 */
-		cpumask_and(&cpus, &cpus, cpu_online_mask);
-		if (cpumask_empty(&cpus))
-			return -EINVAL;
-	}
-
-	for (out = 0; out < pair_count; out++, pairs++) {
-		struct riscv_hwprobe pair;
-
-		if (get_user(pair.key, &pairs->key))
-			return -EFAULT;
-
-		pair.value = 0;
-		hwprobe_one_pair(&pair, &cpus);
-		ret = put_user(pair.key, &pairs->key);
-		if (ret == 0)
-			ret = put_user(pair.value, &pairs->value);
-
-		if (ret)
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_MMU
-
-static int __init init_hwprobe_vdso_data(void)
-{
-	struct vdso_data *vd = __arch_get_k_vdso_data();
-	struct arch_vdso_data *avd = &vd->arch_data;
-	u64 id_bitsmash = 0;
-	struct riscv_hwprobe pair;
-	int key;
-
-	/*
-	 * Initialize vDSO data with the answers for the "all CPUs" case, to
-	 * save a syscall in the common case.
-	 */
-	for (key = 0; key <= RISCV_HWPROBE_MAX_KEY; key++) {
-		pair.key = key;
-		hwprobe_one_pair(&pair, cpu_online_mask);
-
-		WARN_ON_ONCE(pair.key < 0);
-
-		avd->all_cpu_hwprobe_values[key] = pair.value;
-		/*
-		 * Smash together the vendor, arch, and impl IDs to see if
-		 * they're all 0 or any negative.
-		 */
-		if (key <= RISCV_HWPROBE_KEY_MIMPID)
-			id_bitsmash |= pair.value;
-	}
-
-	/*
-	 * If the arch, vendor, and implementation ID are all the same across
-	 * all harts, then assume all CPUs are the same, and allow the vDSO to
-	 * answer queries for arbitrary masks. However if all values are 0 (not
-	 * populated) or any value returns -1 (varies across CPUs), then the
-	 * vDSO should defer to the kernel for exotic cpu masks.
-	 */
-	avd->homogeneous_cpus = id_bitsmash != 0 && id_bitsmash != -1;
-	return 0;
-}
-
-arch_initcall_sync(init_hwprobe_vdso_data);
-
-#endif /* CONFIG_MMU */
-
-SYSCALL_DEFINE5(riscv_hwprobe, struct riscv_hwprobe __user *, pairs,
-		size_t, pair_count, size_t, cpu_count, unsigned long __user *,
-		cpus, unsigned int, flags)
-{
-	return do_riscv_hwprobe(pairs, pair_count, cpu_count,
-				cpus, flags);
-}
-
 /* Not defined using SYSCALL_DEFINE0 to avoid error injection */
 asmlinkage long __riscv_sys_ni_syscall(const struct pt_regs *__unused)
 {
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/time.c linux-libre-6.8-gnu/arch/riscv/kernel/time.c
index 23641e82a9df..ba3477197789 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/time.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/time.c
@@ -12,6 +12,7 @@
 #include <asm/sbi.h>
 #include <asm/processor.h>
 #include <asm/timex.h>
+#include <asm/paravirt.h>
 
 unsigned long riscv_timebase __ro_after_init;
 EXPORT_SYMBOL_GPL(riscv_timebase);
@@ -45,4 +46,6 @@ void __init time_init(void)
 	timer_probe();
 
 	tick_setup_hrtimer_broadcast();
+
+	pv_time_init();
 }
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/traps_misaligned.c linux-libre-6.8-gnu/arch/riscv/kernel/traps_misaligned.c
index 5255f8134aef..8ded225e8c5b 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/traps_misaligned.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/traps_misaligned.c
@@ -319,7 +319,7 @@ static inline int get_insn(struct pt_regs *regs, ulong mepc, ulong *r_insn)
 static inline int load_u8(struct pt_regs *regs, const u8 *addr, u8 *r_val)
 {
 	if (user_mode(regs)) {
-		return __get_user(*r_val, addr);
+		return __get_user(*r_val, (u8 __user *)addr);
 	} else {
 		*r_val = *addr;
 		return 0;
@@ -329,7 +329,7 @@ static inline int load_u8(struct pt_regs *regs, const u8 *addr, u8 *r_val)
 static inline int store_u8(struct pt_regs *regs, u8 *addr, u8 val)
 {
 	if (user_mode(regs)) {
-		return __put_user(val, addr);
+		return __put_user(val, (u8 __user *)addr);
 	} else {
 		*addr = val;
 		return 0;
@@ -343,7 +343,7 @@ static inline int store_u8(struct pt_regs *regs, u8 *addr, u8 val)
 	if (user_mode(regs)) {				\
 		__ret = __get_user(insn, insn_addr);	\
 	} else {					\
-		insn = *insn_addr;			\
+		insn = *(__force u16 *)insn_addr;	\
 		__ret = 0;				\
 	}						\
 							\
diff --git linux-libre-6.7-gnu/arch/riscv/kernel/vdso/hwprobe.c linux-libre-6.8-gnu/arch/riscv/kernel/vdso/hwprobe.c
index cadf725ef798..1e926e4b5881 100644
--- linux-libre-6.7-gnu/arch/riscv/kernel/vdso/hwprobe.c
+++ linux-libre-6.8-gnu/arch/riscv/kernel/vdso/hwprobe.c
@@ -3,26 +3,22 @@
  * Copyright 2023 Rivos, Inc
  */
 
+#include <linux/string.h>
 #include <linux/types.h>
 #include <vdso/datapage.h>
 #include <vdso/helpers.h>
 
 extern int riscv_hwprobe(struct riscv_hwprobe *pairs, size_t pair_count,
-			 size_t cpu_count, unsigned long *cpus,
+			 size_t cpusetsize, unsigned long *cpus,
 			 unsigned int flags);
 
-/* Add a prototype to avoid -Wmissing-prototypes warning. */
-int __vdso_riscv_hwprobe(struct riscv_hwprobe *pairs, size_t pair_count,
-			 size_t cpu_count, unsigned long *cpus,
-			 unsigned int flags);
-
-int __vdso_riscv_hwprobe(struct riscv_hwprobe *pairs, size_t pair_count,
-			 size_t cpu_count, unsigned long *cpus,
-			 unsigned int flags)
+static int riscv_vdso_get_values(struct riscv_hwprobe *pairs, size_t pair_count,
+				 size_t cpusetsize, unsigned long *cpus,
+				 unsigned int flags)
 {
 	const struct vdso_data *vd = __arch_get_vdso_data();
 	const struct arch_vdso_data *avd = &vd->arch_data;
-	bool all_cpus = !cpu_count && !cpus;
+	bool all_cpus = !cpusetsize && !cpus;
 	struct riscv_hwprobe *p = pairs;
 	struct riscv_hwprobe *end = pairs + pair_count;
 
@@ -33,7 +29,7 @@ int __vdso_riscv_hwprobe(struct riscv_hwprobe *pairs, size_t pair_count,
 	 * masks.
 	 */
 	if ((flags != 0) || (!all_cpus && !avd->homogeneous_cpus))
-		return riscv_hwprobe(pairs, pair_count, cpu_count, cpus, flags);
+		return riscv_hwprobe(pairs, pair_count, cpusetsize, cpus, flags);
 
 	/* This is something we can handle, fill out the pairs. */
 	while (p < end) {