diff --git linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-block linux-libre-6.6.46-gnu/Documentation/ABI/stable/sysfs-block
index 1fe9a553c37b..f0025d1c3d5a 100644
--- linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-block
+++ linux-libre-6.6.46-gnu/Documentation/ABI/stable/sysfs-block
@@ -101,6 +101,16 @@ Description:
 		devices that support receiving integrity metadata.
 
 
+What:		/sys/block/<disk>/partscan
+Date:		May 2024
+Contact:	Christoph Hellwig <hch@lst.de>
+Description:
+		The /sys/block/<disk>/partscan files reports if partition
+		scanning is enabled for the disk.  It returns "1" if partition
+		scanning is enabled, or "0" if not.  The value type is a 32-bit
+		unsigned integer, but only "0" and "1" are valid values.
+
+
 What:		/sys/block/<disk>/<partition>/alignment_offset
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
index 0f58701367b6..af31e5a22d89 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
+++ linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
@@ -6,3 +6,12 @@ Description:
 		OP-TEE bus provides reference to registered drivers under this directory. The <uuid>
 		matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers
 		are free to create needed API under optee-ta-<uuid> directory.
+
+What:		/sys/bus/tee/devices/optee-ta-<uuid>/need_supplicant
+Date:		November 2023
+KernelVersion:	6.7
+Contact:	op-tee@lists.trustedfirmware.org
+Description:
+		Allows to distinguish whether an OP-TEE based TA/device requires user-space
+		tee-supplicant to function properly or not. This attribute will be present for
+		devices which depend on tee-supplicant to be running.
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-devfreq linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-class-devfreq
index 5e6b74f30406..1e7e0bb4c14e 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-devfreq
+++ linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-class-devfreq
@@ -52,6 +52,9 @@ Description:
 
 			echo 0 > /sys/class/devfreq/.../trans_stat
 
+		If the transition table is bigger than PAGE_SIZE, reading
+		this will return an -EFBIG error.
+
 What:		/sys/class/devfreq/.../available_frequencies
 Date:		October 2012
 Contact:	Nishanth Menon <nm@ti.com>
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-led linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-class-led
index b2ff0012c0f2..2e24ac3bd7ef 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-led
+++ linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-class-led
@@ -59,15 +59,6 @@ Description:
 		brightness. Reading this file when no hw brightness change
 		event has happened will return an ENODATA error.
 
-What:		/sys/class/leds/<led>/color
-Date:		June 2023
-KernelVersion:	6.5
-Description:
-		Color of the LED.
-
-		This is a read-only file. Reading this file returns the color
-		of the LED as a string (e.g: "red", "green", "multicolor").
-
 What:		/sys/class/leds/<led>/trigger
 Date:		March 2006
 KernelVersion:	2.6.17
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-queues linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-class-net-queues
index 906ff3ca928a..5bff64d256c2 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-queues
+++ linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-class-net-queues
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
 Date:		March 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -8,7 +8,7 @@ Description:
 		network device queue. Possible values depend on the number
 		of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
 Date:		April 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -16,7 +16,7 @@ Description:
 		Number of Receive Packet Steering flows being currently
 		processed by this particular network device receive queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -24,7 +24,7 @@ Description:
 		Indicates the number of transmit timeout events seen by this
 		network interface transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
 Date:		March 2015
 KernelVersion:	4.1
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		A Mbps max-rate set for the queue, a value of zero means disabled,
 		default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
 Date:		November 2010
 KernelVersion:	2.6.38
 Contact:	netdev@vger.kernel.org
@@ -42,7 +42,7 @@ Description:
 		network device transmit queue. Possible values depend on the
 		number of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
 Date:		June 2018
 KernelVersion:	4.18.0
 Contact:	netdev@vger.kernel.org
@@ -53,7 +53,7 @@ Description:
 		number of available receive queue(s) in the network device.
 		Default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -62,7 +62,7 @@ Description:
 		of this particular network device transmit queue.
 		Default value is 1000.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -70,7 +70,7 @@ Description:
 		Indicates the number of bytes (objects) in flight on this
 		network device transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -79,7 +79,7 @@ Description:
 		on this network device transmit queue. This value is clamped
 		to be within the bounds defined by limit_max and limit_min.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -88,7 +88,7 @@ Description:
 		queued on this network device transmit queue. See
 		include/linux/dynamic_queue_limits.h for the default value.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-statistics linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
index 55db27815361..53e508c6936a 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
+++ linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/statistics/collisions
+What:		/sys/class/net/<iface>/statistics/collisions
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -6,7 +6,7 @@ Description:
 		Indicates the number of collisions seen by this network device.
 		This value might not be relevant with all MAC layers.
 
-What:		/sys/class/<iface>/statistics/multicast
+What:		/sys/class/net/<iface>/statistics/multicast
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -14,7 +14,7 @@ Description:
 		Indicates the number of multicast packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/rx_bytes
+What:		/sys/class/net/<iface>/statistics/rx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -23,7 +23,7 @@ Description:
 		See the network driver for the exact meaning of when this
 		value is incremented.
 
-What:		/sys/class/<iface>/statistics/rx_compressed
+What:		/sys/class/net/<iface>/statistics/rx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		network device. This value might only be relevant for interfaces
 		that support packet compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/rx_crc_errors
+What:		/sys/class/net/<iface>/statistics/rx_crc_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -41,7 +41,7 @@ Description:
 		by this network device. Note that the specific meaning might
 		depend on the MAC layer used by the interface.
 
-What:		/sys/class/<iface>/statistics/rx_dropped
+What:		/sys/class/net/<iface>/statistics/rx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -51,7 +51,7 @@ Description:
 		packet processing. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_errors
+What:		/sys/class/net/<iface>/statistics/rx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -59,7 +59,7 @@ Description:
 		Indicates the number of receive errors on this network device.
 		See the network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/rx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -68,7 +68,7 @@ Description:
 		network device. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_frame_errors
+What:		/sys/class/net/<iface>/statistics/rx_frame_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -78,7 +78,7 @@ Description:
 		on the MAC layer protocol used. See the network driver for
 		the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_length_errors
+What:		/sys/class/net/<iface>/statistics/rx_length_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -87,7 +87,7 @@ Description:
 		error, oversized or undersized. See the network driver for the
 		exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_missed_errors
+What:		/sys/class/net/<iface>/statistics/rx_missed_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -96,7 +96,7 @@ Description:
 		due to lack of capacity in the receive side. See the network
 		driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_nohandler
+What:		/sys/class/net/<iface>/statistics/rx_nohandler
 Date:		February 2016
 KernelVersion:	4.6
 Contact:	netdev@vger.kernel.org
@@ -104,7 +104,7 @@ Description:
 		Indicates the number of received packets that were dropped on
 		an inactive device by the network core.
 
-What:		/sys/class/<iface>/statistics/rx_over_errors
+What:		/sys/class/net/<iface>/statistics/rx_over_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -114,7 +114,7 @@ Description:
 		(e.g: larger than MTU). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_packets
+What:		/sys/class/net/<iface>/statistics/rx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -122,7 +122,7 @@ Description:
 		Indicates the total number of good packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/tx_aborted_errors
+What:		/sys/class/net/<iface>/statistics/tx_aborted_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -132,7 +132,7 @@ Description:
 		a medium collision). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_bytes
+What:		/sys/class/net/<iface>/statistics/tx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -143,7 +143,7 @@ Description:
 		transmitted packets or all packets that have been queued for
 		transmission.
 
-What:		/sys/class/<iface>/statistics/tx_carrier_errors
+What:		/sys/class/net/<iface>/statistics/tx_carrier_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -152,7 +152,7 @@ Description:
 		because of carrier errors (e.g: physical link down). See the
 		network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_compressed
+What:		/sys/class/net/<iface>/statistics/tx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -161,7 +161,7 @@ Description:
 		this might only be relevant for devices that support
 		compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/tx_dropped
+What:		/sys/class/net/<iface>/statistics/tx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -170,7 +170,7 @@ Description:
 		See the driver for the exact reasons as to why the packets were
 		dropped.
 
-What:		/sys/class/<iface>/statistics/tx_errors
+What:		/sys/class/net/<iface>/statistics/tx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -179,7 +179,7 @@ Description:
 		a network device. See the driver for the exact reasons as to
 		why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/tx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -188,7 +188,7 @@ Description:
 		FIFO error. See the driver for the exact reasons as to why the
 		packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_heartbeat_errors
+What:		/sys/class/net/<iface>/statistics/tx_heartbeat_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -197,7 +197,7 @@ Description:
 		reported as heartbeat errors. See the driver for the exact
 		reasons as to why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_packets
+What:		/sys/class/net/<iface>/statistics/tx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -206,7 +206,7 @@ Description:
 		device. See the driver for whether this reports the number of all
 		attempted or successful transmissions.
 
-What:		/sys/class/<iface>/statistics/tx_window_errors
+What:		/sys/class/net/<iface>/statistics/tx_window_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index 7ecd5c8161a6..34b6f6ab4742 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -519,6 +519,7 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
 		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
 		/sys/devices/system/cpu/vulnerabilities/retbleed
 		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-qat linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-driver-qat
index ef6d6c57105e..96834d103a09 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-qat
+++ linux-libre-6.6.46-gnu/Documentation/ABI/testing/sysfs-driver-qat
@@ -29,6 +29,8 @@ Description:	(RW) Reports the current configuration of the QAT device.
 		  services
 		* asym;sym: identical to sym;asym
 		* dc: the device is configured for running compression services
+		* dcc: identical to dc but enables the dc chaining feature,
+		  hash then compression. If this is not required chose dc
 		* sym: the device is configured for running symmetric crypto
 		  services
 		* asym: the device is configured for running asymmetric crypto
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-obsolete.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/abi-obsolete.rst
index d095867899c5..594e697aa1b2 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-obsolete.rst
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/abi-obsolete.rst
@@ -7,5 +7,5 @@ marked to be removed at some later point in time.
 The description of the interface will document the reason why it is
 obsolete and when it can be expected to be removed.
 
-.. kernel-abi:: $srctree/Documentation/ABI/obsolete
+.. kernel-abi:: ABI/obsolete
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-removed.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/abi-removed.rst
index f7e9e43023c1..f9e000c81828 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-removed.rst
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/abi-removed.rst
@@ -1,5 +1,5 @@
 ABI removed symbols
 ===================
 
-.. kernel-abi:: $srctree/Documentation/ABI/removed
+.. kernel-abi:: ABI/removed
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-stable.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/abi-stable.rst
index 70490736e0d3..fc3361d847b1 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-stable.rst
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/abi-stable.rst
@@ -10,5 +10,5 @@ for at least 2 years.
 Most interfaces (like syscalls) are expected to never change and always
 be available.
 
-.. kernel-abi:: $srctree/Documentation/ABI/stable
+.. kernel-abi:: ABI/stable
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-testing.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/abi-testing.rst
index b205b16a72d0..19767926b344 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-testing.rst
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/abi-testing.rst
@@ -16,5 +16,5 @@ Programs that use these interfaces are strongly encouraged to add their
 name to the description of these interfaces, so that the kernel
 developers can easily notify them if any changes occur.
 
-.. kernel-abi:: $srctree/Documentation/ABI/testing
+.. kernel-abi:: ABI/testing
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/cifs/usage.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/cifs/usage.rst
index 5f936b4b6018..3de599cf0779 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/cifs/usage.rst
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/cifs/usage.rst
@@ -722,40 +722,26 @@ Configuration pseudo-files:
 ======================= =======================================================
 SecurityFlags		Flags which control security negotiation and
 			also packet signing. Authentication (may/must)
-			flags (e.g. for NTLM and/or NTLMv2) may be combined with
+			flags (e.g. for NTLMv2) may be combined with
 			the signing flags.  Specifying two different password
 			hashing mechanisms (as "must use") on the other hand
 			does not make much sense. Default flags are::
 
-				0x07007
-
-			(NTLM, NTLMv2 and packet signing allowed).  The maximum
-			allowable flags if you want to allow mounts to servers
-			using weaker password hashes is 0x37037 (lanman,
-			plaintext, ntlm, ntlmv2, signing allowed).  Some
-			SecurityFlags require the corresponding menuconfig
-			options to be enabled.  Enabling plaintext
-			authentication currently requires also enabling
-			lanman authentication in the security flags
-			because the cifs module only supports sending
-			laintext passwords using the older lanman dialect
-			form of the session setup SMB.  (e.g. for authentication
-			using plain text passwords, set the SecurityFlags
-			to 0x30030)::
+				0x00C5
+
+			(NTLMv2 and packet signing allowed).  Some SecurityFlags
+			may require enabling a corresponding menuconfig option.
 
 			  may use packet signing			0x00001
 			  must use packet signing			0x01001
-			  may use NTLM (most common password hash)	0x00002
-			  must use NTLM					0x02002
 			  may use NTLMv2				0x00004
 			  must use NTLMv2				0x04004
-			  may use Kerberos security			0x00008
-			  must use Kerberos				0x08008
-			  may use lanman (weak) password hash		0x00010
-			  must use lanman password hash			0x10010
-			  may use plaintext passwords			0x00020
-			  must use plaintext passwords			0x20020
-			  (reserved for future packet encryption)	0x00040
+			  may use Kerberos security (krb5)		0x00008
+			  must use Kerberos                             0x08008
+			  may use NTLMSSP               		0x00080
+			  must use NTLMSSP           			0x80080
+			  seal (packet encryption)			0x00040
+			  must seal                                     0x40040
 
 cifsFYI			If set to non-zero value, additional debug information
 			will be logged to the system error log.  This field
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/features.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/features.rst
index 8c167082a84f..7651eca38227 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features
+.. kernel-feat:: features
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
index cf1eeefdfc32..a92e10ec402e 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
@@ -67,8 +67,8 @@ arg4:
     will be performed for all tasks in the task group of ``pid``.
 
 arg5:
-    userspace pointer to an unsigned long for storing the cookie returned by
-    ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
+    userspace pointer to an unsigned long long for storing the cookie returned
+    by ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
 
 In order for a process to push a cookie to, or pull a cookie from a process, it
 is required to have the ptrace access mode: `PTRACE_MODE_READ_REALCREDS` to the
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/hw-vuln/index.rst
index de99caabf65a..ff0b440ef2dc 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -21,3 +21,4 @@ are configurable at compile, boot or run time.
    cross-thread-rsb
    srso
    gather_data_sampling
+   reg-file-data-sampling
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
new file mode 100644
index 000000000000..0585d02b9a6c
--- /dev/null
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
@@ -0,0 +1,104 @@
+==================================
+Register File Data Sampling (RFDS)
+==================================
+
+Register File Data Sampling (RFDS) is a microarchitectural vulnerability that
+only affects Intel Atom parts(also branded as E-cores). RFDS may allow
+a malicious actor to infer data values previously used in floating point
+registers, vector registers, or integer registers. RFDS does not provide the
+ability to choose which data is inferred. CVE-2023-28746 is assigned to RFDS.
+
+Affected Processors
+===================
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============
+   Common name          Family_Model
+   ===================  ============
+   ATOM_GOLDMONT           06_5CH
+   ATOM_GOLDMONT_D         06_5FH
+   ATOM_GOLDMONT_PLUS      06_7AH
+   ATOM_TREMONT_D          06_86H
+   ATOM_TREMONT            06_96H
+   ALDERLAKE               06_97H
+   ALDERLAKE_L             06_9AH
+   ATOM_TREMONT_L          06_9CH
+   RAPTORLAKE              06_B7H
+   RAPTORLAKE_P            06_BAH
+   ATOM_GRACEMONT          06_BEH
+   RAPTORLAKE_S            06_BFH
+   ===================  ============
+
+As an exception to this table, Intel Xeon E family parts ALDERLAKE(06_97H) and
+RAPTORLAKE(06_B7H) codenamed Catlow are not affected. They are reported as
+vulnerable in Linux because they share the same family/model with an affected
+part. Unlike their affected counterparts, they do not enumerate RFDS_CLEAR or
+CPUID.HYBRID. This information could be used to distinguish between the
+affected and unaffected parts, but it is deemed not worth adding complexity as
+the reporting is fixed automatically when these parts enumerate RFDS_NO.
+
+Mitigation
+==========
+Intel released a microcode update that enables software to clear sensitive
+information using the VERW instruction. Like MDS, RFDS deploys the same
+mitigation strategy to force the CPU to clear the affected buffers before an
+attacker can extract the secrets. This is achieved by using the otherwise
+unused and obsolete VERW instruction in combination with a microcode update.
+The microcode clears the affected CPU buffers when the VERW instruction is
+executed.
+
+Mitigation points
+-----------------
+VERW is executed by the kernel before returning to user space, and by KVM
+before VMentry. None of the affected cores support SMT, so VERW is not required
+at C-state transitions.
+
+New bits in IA32_ARCH_CAPABILITIES
+----------------------------------
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+vulnerability and mitigation capability:
+
+- Bit 27 - RFDS_NO - When set, processor is not affected by RFDS.
+- Bit 28 - RFDS_CLEAR - When set, processor is affected by RFDS, and has the
+  microcode that clears the affected buffers on VERW execution.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control RFDS mitigation at boot time with the
+parameter "reg_file_data_sampling=". The valid arguments are:
+
+  ==========  =================================================================
+  on          If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and before entering a VM.
+  off         Disables mitigation.
+  ==========  =================================================================
+
+Mitigation default is selected by CONFIG_MITIGATION_RFDS.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: No microcode'
+       - The processor is vulnerable but microcode is not updated.
+     * - 'Mitigation: Clear Register File'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+	 enabled.
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
index 32a8893e5617..e0a1be97fa75 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -138,11 +138,10 @@ associated with the source address of the indirect branch. Specifically,
 the BHB might be shared across privilege levels even in the presence of
 Enhanced IBRS.
 
-Currently the only known real-world BHB attack vector is via
-unprivileged eBPF. Therefore, it's highly recommended to not enable
-unprivileged eBPF, especially when eIBRS is used (without retpolines).
-For a full mitigation against BHB attacks, it's recommended to use
-retpolines (or eIBRS combined with retpolines).
+Previously the only known real-world BHB attack vector was via unprivileged
+eBPF. Further research has found attacks that don't require unprivileged eBPF.
+For a full mitigation against BHB attacks it is recommended to set BHI_DIS_S or
+use the BHB clearing sequence.
 
 Attack scenarios
 ----------------
@@ -430,6 +429,23 @@ The possible values in this file are:
   'PBRSB-eIBRS: Not affected'  CPU is not affected by PBRSB
   ===========================  =======================================================
 
+  - Branch History Injection (BHI) protection status:
+
+.. list-table::
+
+ * - BHI: Not affected
+   - System is not affected
+ * - BHI: Retpoline
+   - System is protected by retpoline
+ * - BHI: BHI_DIS_S
+   - System is protected by BHI_DIS_S
+ * - BHI: SW loop, KVM SW loop
+   - System is protected by software clearing sequence
+ * - BHI: Vulnerable
+   - System is vulnerable to BHI
+ * - BHI: Vulnerable, KVM: SW loop
+   - System is vulnerable; KVM is protected by software clearing sequence
+
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will
 report vulnerability.
@@ -484,7 +500,11 @@ Spectre variant 2
 
    Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
    boot, by setting the IBRS bit, and they're automatically protected against
-   Spectre v2 variant attacks.
+   some Spectre v2 variant attacks. The BHB can still influence the choice of
+   indirect branch predictor entry, and although branch predictor entries are
+   isolated between modes when eIBRS is enabled, the BHB itself is not isolated
+   between modes. Systems which support BHI_DIS_S will set it to protect against
+   BHI attacks.
 
    On Intel's enhanced IBRS systems, this includes cross-thread branch target
    injections on SMT systems (STIBP). In other words, Intel eIBRS enables
@@ -638,6 +658,18 @@ kernel command line.
 		spectre_v2=off. Spectre variant 1 mitigations
 		cannot be disabled.
 
+	spectre_bhi=
+
+		[X86] Control mitigation of Branch History Injection
+		(BHI) vulnerability.  This setting affects the deployment
+		of the HW BHI control and the SW BHB clearing sequence.
+
+		on
+			(default) Enable the HW or SW mitigation as
+			needed.
+		off
+			Disable the mitigation.
+
 For spectre_v2_user see Documentation/admin-guide/kernel-parameters.txt
 
 Mitigation selection guide
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/srso.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/hw-vuln/srso.rst
index b6cfb51cb0b4..e715bfc09879 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/srso.rst
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/hw-vuln/srso.rst
@@ -46,12 +46,22 @@ The possible values in this file are:
 
    The processor is not vulnerable
 
- * 'Vulnerable: no microcode':
+* 'Vulnerable':
+
+   The processor is vulnerable and no mitigations have been applied.
+
+ * 'Vulnerable: No microcode':
 
    The processor is vulnerable, no microcode extending IBPB
    functionality to address the vulnerability has been applied.
 
- * 'Mitigation: microcode':
+ * 'Vulnerable: Safe RET, no microcode':
+
+   The "Safe RET" mitigation (see below) has been applied to protect the
+   kernel, but the IBPB-extending microcode has not been applied.  User
+   space tasks may still be vulnerable.
+
+ * 'Vulnerable: Microcode, no safe RET':
 
    Extended IBPB functionality microcode patch has been applied. It does
    not address User->Kernel and Guest->Host transitions protection but it
@@ -72,11 +82,11 @@ The possible values in this file are:
 
    (spec_rstack_overflow=microcode)
 
- * 'Mitigation: safe RET':
+ * 'Mitigation: Safe RET':
 
-   Software-only mitigation. It complements the extended IBPB microcode
-   patch functionality by addressing User->Kernel and Guest->Host
-   transitions protection.
+   Combined microcode/software mitigation. It complements the
+   extended IBPB microcode patch functionality by addressing
+   User->Kernel and Guest->Host transitions protection.
 
    Selected by default or by spec_rstack_overflow=safe-ret
 
@@ -129,7 +139,7 @@ an indrect branch prediction barrier after having applied the required
 microcode patch for one's system. This mitigation comes also at
 a performance cost.
 
-Mitigation: safe RET
+Mitigation: Safe RET
 --------------------
 
 The mitigation works by ensuring all RET instructions speculate to
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
index 599e8d3bcbc3..9235cf4fbabf 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
@@ -172,7 +172,7 @@ variables.
 Offset of the free_list's member. This value is used to compute the number
 of free pages.
 
-Each zone has a free_area structure array called free_area[MAX_ORDER + 1].
+Each zone has a free_area structure array called free_area[NR_PAGE_ORDERS].
 The free_list represents a linked list of free page blocks.
 
 (list_head, next|prev)
@@ -189,8 +189,8 @@ Offsets of the vmap_area's members. They carry vmalloc-specific
 information. Makedumpfile gets the start address of the vmalloc region
 from this.
 
-(zone.free_area, MAX_ORDER + 1)
--------------------------------
+(zone.free_area, NR_PAGE_ORDERS)
+--------------------------------
 
 Free areas descriptor. User-space tools use this value to iterate the
 free_area ranges. MAX_ORDER is used by the zone buddy allocator.
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.6.46-gnu/Documentation/admin-guide/kernel-parameters.txt
index 0a1731a0f0ef..a7fe11389736 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -664,12 +664,6 @@
 			loops can be debugged more effectively on production
 			systems.
 
-	clocksource.max_cswd_read_retries= [KNL]
-			Number of clocksource_watchdog() retries due to
-			external delays before the clock will be marked
-			unstable.  Defaults to two retries, that is,
-			three attempts to read the clock under test.
-
 	clocksource.verify_n_cpus= [KNL]
 			Limit the number of CPUs checked for clocksources
 			marked with CLOCK_SOURCE_VERIFY_PERCPU that
@@ -1133,6 +1127,26 @@
 			The filter can be disabled or changed to another
 			driver later using sysfs.
 
+	reg_file_data_sampling=
+			[X86] Controls mitigation for Register File Data
+			Sampling (RFDS) vulnerability. RFDS is a CPU
+			vulnerability which may allow userspace to infer
+			kernel data values previously stored in floating point
+			registers, vector registers, or integer registers.
+			RFDS only affects Intel Atom processors.
+
+			on:	Turns ON the mitigation.
+			off:	Turns OFF the mitigation.
+
+			This parameter overrides the compile time default set
+			by CONFIG_MITIGATION_RFDS. Mitigation cannot be
+			disabled when other VERW based mitigations (like MDS)
+			are enabled. In order to disable RFDS mitigation all
+			VERW based mitigations need to be disabled.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
+
 	driver_async_probe=  [KNL]
 			List of driver names to be probed asynchronously. *
 			matches with all driver names. If * is specified, the
@@ -3249,9 +3263,7 @@
 
 	mem_encrypt=	[X86-64] AMD Secure Memory Encryption (SME) control
 			Valid arguments: on, off
-			Default (depends on kernel configuration option):
-			  on  (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y)
-			  off (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=n)
+			Default: off
 			mem_encrypt=on:		Activate SME
 			mem_encrypt=off:	Do not activate SME
 
@@ -3305,6 +3317,9 @@
 			arch-independent options, each of which is an
 			aggregation of existing arch-specific options.
 
+			Note, "mitigations" is supported if and only if the
+			kernel was built with CPU_MITIGATIONS=y.
+
 			off
 				Disable all optional CPU mitigations.  This
 				improves system performance, but it may also
@@ -3322,8 +3337,10 @@
 					       nospectre_bhb [ARM64]
 					       nospectre_v1 [X86,PPC]
 					       nospectre_v2 [X86,PPC,S390,ARM64]
+					       reg_file_data_sampling=off [X86]
 					       retbleed=off [X86]
 					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_bhi=off [X86]
 					       spectre_v2_user=off [X86]
 					       srbds=off [X86,INTEL]
 					       ssbd=force-off [ARM64]
@@ -4632,11 +4649,9 @@
 
 	profile=	[KNL] Enable kernel profiling via /proc/profile
 			Format: [<profiletype>,]<number>
-			Param: <profiletype>: "schedule", "sleep", or "kvm"
+			Param: <profiletype>: "schedule" or "kvm"
 				[defaults to kernel profiling]
 			Param: "schedule" - profile schedule points.
-			Param: "sleep" - profile D-state sleeping (millisecs).
-				Requires CONFIG_SCHEDSTATS
 			Param: "kvm" - profile VM exits.
 			Param: <number> - step/bucket size as a power of 2 for
 				statistical time based profiling.
@@ -5858,6 +5873,13 @@
 			This feature may be more efficiently disabled
 			using the csdlock_debug- kernel parameter.
 
+	smp.panic_on_ipistall= [KNL]
+			If a csd_lock_timeout extends for more than
+			the specified number of milliseconds, panic the
+			system.  By default, let CSD-lock acquisition
+			take as long as they take.  Specifying 300,000
+			for this value provides a 5-minute timeout.
+
 	smsc-ircc2.nopnp	[HW] Don't use PNP to discover SMC devices
 	smsc-ircc2.ircc_cfg=	[HW] Device configuration I/O port
 	smsc-ircc2.ircc_sir=	[HW] SIR base I/O port
@@ -5894,6 +5916,15 @@
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/admin-guide/laptops/sonypi.rst
 
+	spectre_bhi=	[X86] Control mitigation of Branch History Injection
+			(BHI) vulnerability.  This setting affects the
+			deployment of the HW BHI control and the SW BHB
+			clearing sequence.
+
+			on   - (default) Enable the HW or SW mitigation
+			       as needed.
+			off  - Disable the mitigation.
+
 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
 			The default operation protects the kernel from
@@ -6817,6 +6848,9 @@
 					pause after every control message);
 				o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
 					delay after resetting its port);
+				p = USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT
+					(Reduce timeout of the SET_ADDRESS
+					request from 5000 ms to 500 ms);
 			Example: quirks=0781:5580:bk,0a5c:5834:gij
 
 	usbhid.mousepoll=
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/mm/damon/usage.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/mm/damon/usage.rst
index 8da1b7281827..9285f69f4f73 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/mm/damon/usage.rst
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/mm/damon/usage.rst
@@ -389,7 +389,7 @@ pages of all memory cgroups except ``/having_care_already``.::
     # # further filter out all cgroups except one at '/having_care_already'
     echo memcg > 1/type
     echo /having_care_already > 1/memcg_path
-    echo N > 1/matching
+    echo Y > 1/matching
 
 Note that ``anon`` and ``memcg`` filters are currently supported only when
 ``paddr`` `implementation <sysfs_contexts>` is being used.
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/sysctl/net.rst linux-libre-6.6.46-gnu/Documentation/admin-guide/sysctl/net.rst
index 4877563241f3..5f1748f33d9a 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/sysctl/net.rst
+++ linux-libre-6.6.46-gnu/Documentation/admin-guide/sysctl/net.rst
@@ -205,6 +205,11 @@ Will increase power usage.
 
 Default: 0 (off)
 
+mem_pcpu_rsv
+------------
+
+Per-cpu reserved forward alloc cache size in page units. Default 1MB per CPU.
+
 rmem_default
 ------------
 
diff --git linux-libre-6.6-gnu/Documentation/arch/arc/features.rst linux-libre-6.6.46-gnu/Documentation/arch/arc/features.rst
index b793583d688a..49ff446ff744 100644
--- linux-libre-6.6-gnu/Documentation/arch/arc/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/arc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arc
+.. kernel-feat:: features arc
diff --git linux-libre-6.6-gnu/Documentation/arch/arm/features.rst linux-libre-6.6.46-gnu/Documentation/arch/arm/features.rst
index 7414ec03dd15..0e76aaf68eca 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/arm/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arm
+.. kernel-feat:: features arm
diff --git linux-libre-6.6-gnu/Documentation/arch/arm64/features.rst linux-libre-6.6.46-gnu/Documentation/arch/arm64/features.rst
index dfa4cb3cd3ef..03321f4309d0 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm64/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/arm64/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arm64
+.. kernel-feat:: features arm64
diff --git linux-libre-6.6-gnu/Documentation/arch/arm64/silicon-errata.rst linux-libre-6.6.46-gnu/Documentation/arch/arm64/silicon-errata.rst
index f47f63bcf67c..357d6cb98161 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm64/silicon-errata.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/arm64/silicon-errata.rst
@@ -71,6 +71,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2658417        | ARM64_ERRATUM_2658417       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #3117295        | ARM64_ERRATUM_3117295       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A520     | #2966298        | ARM64_ERRATUM_2966298       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
@@ -117,32 +119,68 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1463225        | ARM64_ERRATUM_1463225       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A77      | #3324348        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78      | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78C     | #3324346,3324347| ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A715     | #2645198        | ARM64_ERRATUM_2645198       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A720     | #3456091        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A725     | #3456106        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1       | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1C      | #3324346        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X3       | #3324335        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X4       | #3194386        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X925     | #3324334        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1542419        | ARM64_ERRATUM_1542419       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2139208        | ARM64_ERRATUM_2139208       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2067961        | ARM64_ERRATUM_2067961       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2253138        | ARM64_ERRATUM_2253138       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #3324339        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V1     | #3324341        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V2     | #3324336        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3     | #3312417        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-600         | #1076982,1209401| N/A                         |
@@ -233,3 +271,10 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ASR            | ASR8601         | #8601001        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2139208        | ARM64_ERRATUM_2139208       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2067961        | ARM64_ERRATUM_2067961       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2253138        | ARM64_ERRATUM_2253138       |
++----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-6.6-gnu/Documentation/arch/ia64/features.rst linux-libre-6.6.46-gnu/Documentation/arch/ia64/features.rst
index d7226fdcf5f8..056838d2ab55 100644
--- linux-libre-6.6-gnu/Documentation/arch/ia64/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/ia64/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features ia64
+.. kernel-feat:: features ia64
diff --git linux-libre-6.6-gnu/Documentation/arch/loongarch/features.rst linux-libre-6.6.46-gnu/Documentation/arch/loongarch/features.rst
index ebacade3ea45..009f44c7951f 100644
--- linux-libre-6.6-gnu/Documentation/arch/loongarch/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/loongarch/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features loongarch
+.. kernel-feat:: features loongarch
diff --git linux-libre-6.6-gnu/Documentation/arch/m68k/features.rst linux-libre-6.6.46-gnu/Documentation/arch/m68k/features.rst
index 5107a2119472..de7f0ccf7fc8 100644
--- linux-libre-6.6-gnu/Documentation/arch/m68k/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/m68k/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features m68k
+.. kernel-feat:: features m68k
diff --git linux-libre-6.6-gnu/Documentation/arch/mips/features.rst linux-libre-6.6.46-gnu/Documentation/arch/mips/features.rst
index 1973d729b29a..6e0ffe3e7354 100644
--- linux-libre-6.6-gnu/Documentation/arch/mips/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/mips/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features mips
+.. kernel-feat:: features mips
diff --git linux-libre-6.6-gnu/Documentation/arch/nios2/features.rst linux-libre-6.6.46-gnu/Documentation/arch/nios2/features.rst
index 8449e63f69b2..89913810ccb5 100644
--- linux-libre-6.6-gnu/Documentation/arch/nios2/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/nios2/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features nios2
+.. kernel-feat:: features nios2
diff --git linux-libre-6.6-gnu/Documentation/arch/openrisc/features.rst linux-libre-6.6.46-gnu/Documentation/arch/openrisc/features.rst
index 3f7c40d219f2..bae2e25adfd6 100644
--- linux-libre-6.6-gnu/Documentation/arch/openrisc/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/openrisc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features openrisc
+.. kernel-feat:: features openrisc
diff --git linux-libre-6.6-gnu/Documentation/arch/parisc/features.rst linux-libre-6.6.46-gnu/Documentation/arch/parisc/features.rst
index 501d7c450037..b3aa4d243b93 100644
--- linux-libre-6.6-gnu/Documentation/arch/parisc/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/parisc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features parisc
+.. kernel-feat:: features parisc
diff --git linux-libre-6.6-gnu/Documentation/arch/s390/features.rst linux-libre-6.6.46-gnu/Documentation/arch/s390/features.rst
index 57c296a9d8f3..2883dc950681 100644
--- linux-libre-6.6-gnu/Documentation/arch/s390/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/s390/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features s390
+.. kernel-feat:: features s390
diff --git linux-libre-6.6-gnu/Documentation/arch/sh/features.rst linux-libre-6.6.46-gnu/Documentation/arch/sh/features.rst
index f722af3b6c99..fae48fe81e9b 100644
--- linux-libre-6.6-gnu/Documentation/arch/sh/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/sh/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features sh
+.. kernel-feat:: features sh
diff --git linux-libre-6.6-gnu/Documentation/arch/sparc/features.rst linux-libre-6.6.46-gnu/Documentation/arch/sparc/features.rst
index c0c92468b0fe..96835b6d598a 100644
--- linux-libre-6.6-gnu/Documentation/arch/sparc/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/sparc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features sparc
+.. kernel-feat:: features sparc
diff --git linux-libre-6.6-gnu/Documentation/arch/x86/amd-memory-encryption.rst linux-libre-6.6.46-gnu/Documentation/arch/x86/amd-memory-encryption.rst
index 934310ce7258..bace87cc9ca2 100644
--- linux-libre-6.6-gnu/Documentation/arch/x86/amd-memory-encryption.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/x86/amd-memory-encryption.rst
@@ -87,14 +87,14 @@ The state of SME in the Linux kernel can be documented as follows:
 	  kernel is non-zero).
 
 SME can also be enabled and activated in the BIOS. If SME is enabled and
-activated in the BIOS, then all memory accesses will be encrypted and it will
-not be necessary to activate the Linux memory encryption support.  If the BIOS
-merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG), then Linux can activate
-memory encryption by default (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y) or
-by supplying mem_encrypt=on on the kernel command line.  However, if BIOS does
-not enable SME, then Linux will not be able to activate memory encryption, even
-if configured to do so by default or the mem_encrypt=on command line parameter
-is specified.
+activated in the BIOS, then all memory accesses will be encrypted and it
+will not be necessary to activate the Linux memory encryption support.
+
+If the BIOS merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG),
+then memory encryption can be enabled by supplying mem_encrypt=on on the
+kernel command line.  However, if BIOS does not enable SME, then Linux
+will not be able to activate memory encryption, even if configured to do
+so by default or the mem_encrypt=on command line parameter is specified.
 
 Secure Nested Paging (SNP)
 ==========================
diff --git linux-libre-6.6-gnu/Documentation/arch/x86/features.rst linux-libre-6.6.46-gnu/Documentation/arch/x86/features.rst
index b663f15053ce..a33616346a38 100644
--- linux-libre-6.6-gnu/Documentation/arch/x86/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/x86/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features x86
+.. kernel-feat:: features x86
diff --git linux-libre-6.6-gnu/Documentation/arch/x86/mds.rst linux-libre-6.6.46-gnu/Documentation/arch/x86/mds.rst
index e73fdff62c0a..c58c72362911 100644
--- linux-libre-6.6-gnu/Documentation/arch/x86/mds.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/x86/mds.rst
@@ -95,6 +95,9 @@ The kernel provides a function to invoke the buffer clearing:
 
     mds_clear_cpu_buffers()
 
+Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path.
+Other than CFLAGS.ZF, this macro doesn't clobber any registers.
+
 The mitigation is invoked on kernel/userspace, hypervisor/guest and C-state
 (idle) transitions.
 
@@ -138,17 +141,30 @@ Mitigation points
 
    When transitioning from kernel to user space the CPU buffers are flushed
    on affected CPUs when the mitigation is not disabled on the kernel
-   command line. The migitation is enabled through the static key
-   mds_user_clear.
-
-   The mitigation is invoked in prepare_exit_to_usermode() which covers
-   all but one of the kernel to user space transitions.  The exception
-   is when we return from a Non Maskable Interrupt (NMI), which is
-   handled directly in do_nmi().
-
-   (The reason that NMI is special is that prepare_exit_to_usermode() can
-    enable IRQs.  In NMI context, NMIs are blocked, and we don't want to
-    enable IRQs with NMIs blocked.)
+   command line. The mitigation is enabled through the feature flag
+   X86_FEATURE_CLEAR_CPU_BUF.
+
+   The mitigation is invoked just before transitioning to userspace after
+   user registers are restored. This is done to minimize the window in
+   which kernel data could be accessed after VERW e.g. via an NMI after
+   VERW.
+
+   **Corner case not handled**
+   Interrupts returning to kernel don't clear CPUs buffers since the
+   exit-to-user path is expected to do that anyways. But, there could be
+   a case when an NMI is generated in kernel after the exit-to-user path
+   has cleared the buffers. This case is not handled and NMI returning to
+   kernel don't clear CPU buffers because:
+
+   1. It is rare to get an NMI after VERW, but before returning to userspace.
+   2. For an unprivileged user, there is no known way to make that NMI
+      less rare or target it.
+   3. It would take a large number of these precisely-timed NMIs to mount
+      an actual attack.  There's presumably not enough bandwidth.
+   4. The NMI in question occurs after a VERW, i.e. when user state is
+      restored and most interesting data is already scrubbed. Whats left
+      is only the data that NMI touches, and that may or may not be of
+      any interest.
 
 
 2. C-State transition
diff --git linux-libre-6.6-gnu/Documentation/arch/xtensa/features.rst linux-libre-6.6.46-gnu/Documentation/arch/xtensa/features.rst
index 6b92c7bfa19d..28dcce1759be 100644
--- linux-libre-6.6-gnu/Documentation/arch/xtensa/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/arch/xtensa/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features xtensa
+.. kernel-feat:: features xtensa
diff --git linux-libre-6.6-gnu/Documentation/cdrom/cdrom-standard.rst linux-libre-6.6.46-gnu/Documentation/cdrom/cdrom-standard.rst
index 7964fe134277..6c1303cff159 100644
--- linux-libre-6.6-gnu/Documentation/cdrom/cdrom-standard.rst
+++ linux-libre-6.6.46-gnu/Documentation/cdrom/cdrom-standard.rst
@@ -217,7 +217,7 @@ current *struct* is::
 		int (*media_changed)(struct cdrom_device_info *, int);
 		int (*tray_move)(struct cdrom_device_info *, int);
 		int (*lock_door)(struct cdrom_device_info *, int);
-		int (*select_speed)(struct cdrom_device_info *, int);
+		int (*select_speed)(struct cdrom_device_info *, unsigned long);
 		int (*get_last_session) (struct cdrom_device_info *,
 					 struct cdrom_multisession *);
 		int (*get_mcn)(struct cdrom_device_info *, struct cdrom_mcn *);
@@ -396,7 +396,7 @@ action need be taken, and the return value should be 0.
 
 ::
 
-	int select_speed(struct cdrom_device_info *cdi, int speed)
+	int select_speed(struct cdrom_device_info *cdi, unsigned long speed)
 
 Some CD-ROM drives are capable of changing their head-speed. There
 are several reasons for changing the speed of a CD-ROM drive. Badly
diff --git linux-libre-6.6-gnu/Documentation/conf.py linux-libre-6.6.46-gnu/Documentation/conf.py
index d4fdf6a3875a..e385e24fe9e7 100644
--- linux-libre-6.6-gnu/Documentation/conf.py
+++ linux-libre-6.6.46-gnu/Documentation/conf.py
@@ -345,9 +345,9 @@ sys.stderr.write("Using %s theme\n" % html_theme)
 html_static_path = ['sphinx-static']
 
 # If true, Docutils "smart quotes" will be used to convert quotes and dashes
-# to typographically correct entities.  This will convert "--" to "—",
-# which is not always what we want, so disable it.
-smartquotes = False
+# to typographically correct entities.  However, conversion of "--" to "—"
+# is not always what we want, so enable only quotes.
+smartquotes_action = 'q'
 
 # Custom sidebar templates, maps document names to template names.
 # Note that the RTD theme ignores this
@@ -383,6 +383,12 @@ latex_elements = {
         verbatimhintsturnover=false,
     ''',
 
+    #
+    # Some of our authors are fond of deep nesting; tell latex to
+    # cope.
+    #
+    'maxlistdepth': '10',
+
     # For CJK One-half spacing, need to be in front of hyperref
     'extrapackages': r'\usepackage{setspace}',
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
index adbfaea32343..90f31beb80c2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -136,7 +136,7 @@ description: |
   There are many devices in the list below that run the standard ChromeOS
   bootloader setup and use the open source depthcharge bootloader to boot the
   OS. These devices do not use the scheme described above. For details, see:
-  https://docs.kernel.org/arm/google/chromebook-boot-flow.html
+  https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html
 
 properties:
   $nodename:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
index 0999ea07f47b..e4576546bf0d 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -127,6 +127,7 @@ patternProperties:
           - qcom,dsi-phy-20nm
           - qcom,dsi-phy-28nm-8226
           - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-hpm-fam-b
           - qcom,dsi-phy-28nm-lp
           - qcom,hdmi-phy-8084
           - qcom,hdmi-phy-8660
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
index 437db0c62339..e1b4b910044b 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -47,8 +47,8 @@ properties:
       - 3
 
   dma-channels:
-    minItems: 1
-    maxItems: 64
+    minimum: 1
+    maximum: 64
 
   clocks:
     minItems: 1
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
index c1060e5fcef3..d3d8a2e143ed 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
@@ -126,7 +126,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-        gpio@e000a000 {
+        gpio@a0020000 {
             compatible = "xlnx,xps-gpio-1.00.a";
             reg = <0xa0020000 0x10000>;
             #gpio-cells = <2>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
index 6adedd3ec399..c22e459c175a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -75,7 +75,7 @@ required:
   - clocks
 
 allOf:
-  - $ref: i2c-controller.yaml
+  - $ref: /schemas/i2c/i2c-controller.yaml#
   - if:
       properties:
         compatible:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index ab151c9db219..580003cdfff5 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -21,7 +21,7 @@ description: |
   google,cros-ec-spi or google,cros-ec-i2c.
 
 allOf:
-  - $ref: i2c-controller.yaml#
+  - $ref: /schemas/i2c/i2c-controller.yaml#
 
 properties:
   compatible:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
index 9996dd93f84b..e1f450b80db2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -28,6 +28,9 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   dmas:
     maxItems: 1
 
@@ -39,12 +42,16 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       A reference to a the actual ADC to which this FPGA ADC interfaces to.
+    deprecated: true
+
+  '#io-backend-cells':
+    const: 0
 
 required:
   - compatible
   - dmas
   - reg
-  - adi,adc-dev
+  - clocks
 
 additionalProperties: false
 
@@ -55,7 +62,7 @@ examples:
         reg = <0x44a00000 0x10000>;
         dmas = <&rx_dma 0>;
         dma-names = "rx";
-
-        adi,adc-dev = <&spi_adc>;
+        clocks = <&axi_clk>;
+        #io-backend-cells = <0>;
     };
 ...
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
index c13c10c8d65d..eed0df9d3a23 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
@@ -42,7 +42,7 @@ allOf:
       properties:
         compatible:
           contains:
-            const: maxim,max30100
+            const: maxim,max30102
     then:
       properties:
         maxim,green-led-current-microamp: false
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
index 509d20c091af..6a206111d4e0 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
@@ -62,6 +62,9 @@ properties:
         - description: MPM pin number
         - description: GIC SPI number for the MPM pin
 
+  '#power-domain-cells':
+    const: 0
+
 required:
   - compatible
   - reg
@@ -93,4 +96,5 @@ examples:
                            <86 183>,
                            <90 260>,
                            <91 260>;
+        #power-domain-cells = <0>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
index cf456f8d9ddc..c87677f5e2a2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
@@ -37,15 +37,15 @@ properties:
       active low.
     maxItems: 1
 
-  dovdd-supply:
+  DOVDD-supply:
     description:
       Definition of the regulator used as interface power supply.
 
-  avdd-supply:
+  AVDD-supply:
     description:
       Definition of the regulator used as analog power supply.
 
-  dvdd-supply:
+  DVDD-supply:
     description:
       Definition of the regulator used as digital power supply.
 
@@ -59,9 +59,9 @@ required:
   - reg
   - clocks
   - clock-names
-  - dovdd-supply
-  - avdd-supply
-  - dvdd-supply
+  - DOVDD-supply
+  - AVDD-supply
+  - DVDD-supply
   - reset-gpios
   - port
 
@@ -82,9 +82,9 @@ examples:
                 clock-names = "xvclk";
                 reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 
-                dovdd-supply = <&sw2_reg>;
-                dvdd-supply = <&sw2_reg>;
-                avdd-supply = <&reg_peri_3p15v>;
+                DOVDD-supply = <&sw2_reg>;
+                DVDD-supply = <&sw2_reg>;
+                AVDD-supply = <&reg_peri_3p15v>;
 
                 port {
                         ov2680_to_mipi: endpoint {
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
index 7032c7e15039..3e128733ef53 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
@@ -61,6 +61,9 @@ properties:
       - description: used for 1st data pipe from RDMA
       - description: used for 2nd data pipe from RDMA
 
+  '#dma-cells':
+    const: 1
+
 required:
   - compatible
   - reg
@@ -70,6 +73,7 @@ required:
   - clocks
   - iommus
   - mboxes
+  - '#dma-cells'
 
 additionalProperties: false
 
@@ -80,16 +84,17 @@ examples:
     #include <dt-bindings/power/mt8183-power.h>
     #include <dt-bindings/memory/mt8183-larb-port.h>
 
-    mdp3_rdma0: mdp3-rdma0@14001000 {
-      compatible = "mediatek,mt8183-mdp3-rdma";
-      reg = <0x14001000 0x1000>;
-      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
-      mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
-                            <CMDQ_EVENT_MDP_RDMA0_EOF>;
-      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-      clocks = <&mmsys CLK_MM_MDP_RDMA0>,
-               <&mmsys CLK_MM_MDP_RSZ1>;
-      iommus = <&iommu>;
-      mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
-               <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+    dma-controller@14001000 {
+        compatible = "mediatek,mt8183-mdp3-rdma";
+        reg = <0x14001000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+                              <CMDQ_EVENT_MDP_RDMA0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+                 <&mmsys CLK_MM_MDP_RSZ1>;
+        iommus = <&iommu>;
+        mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
+                 <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+        #dma-cells = <1>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
index 0baa77198fa2..64ea98aa0592 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
@@ -50,6 +50,9 @@ properties:
   iommus:
     maxItems: 1
 
+  '#dma-cells':
+    const: 1
+
 required:
   - compatible
   - reg
@@ -58,6 +61,7 @@ required:
   - power-domains
   - clocks
   - iommus
+  - '#dma-cells'
 
 additionalProperties: false
 
@@ -68,13 +72,14 @@ examples:
     #include <dt-bindings/power/mt8183-power.h>
     #include <dt-bindings/memory/mt8183-larb-port.h>
 
-    mdp3_wrot0: mdp3-wrot0@14005000 {
-      compatible = "mediatek,mt8183-mdp3-wrot";
-      reg = <0x14005000 0x1000>;
-      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
-      mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
-                            <CMDQ_EVENT_MDP_WROT0_EOF>;
-      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-      clocks = <&mmsys CLK_MM_MDP_WROT0>;
-      iommus = <&iommu>;
+    dma-controller@14005000 {
+        compatible = "mediatek,mt8183-mdp3-wrot";
+        reg = <0x14005000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+                              <CMDQ_EVENT_MDP_WROT0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_WROT0>;
+        iommus = <&iommu>;
+        #dma-cells = <1>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
index e466dff8286d..afcaa427d48b 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -90,15 +90,16 @@ properties:
         description: connection point for input on the parallel interface
 
         properties:
-          bus-type:
-            enum: [5, 6]
-
           endpoint:
             $ref: video-interfaces.yaml#
             unevaluatedProperties: false
 
-        required:
-          - bus-type
+            properties:
+              bus-type:
+                enum: [5, 6]
+
+            required:
+              - bus-type
 
     anyOf:
       - required:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt
index 294693a8906c..10540aa7afa1 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -22,8 +22,9 @@ compatible:
 	"mediatek,mt6323" for PMIC MT6323
 	"mediatek,mt6331" for PMIC MT6331 and MT6332
 	"mediatek,mt6357" for PMIC MT6357
-	"mediatek,mt6358" for PMIC MT6358 and MT6366
+	"mediatek,mt6358" for PMIC MT6358
 	"mediatek,mt6359" for PMIC MT6359
+	"mediatek,mt6366", "mediatek,mt6358" for PMIC MT6366
 	"mediatek,mt6397" for PMIC MT6397
 
 Optional subnodes:
@@ -40,6 +41,7 @@ Optional subnodes:
 		- compatible: "mediatek,mt6323-regulator"
 	see ../regulator/mt6323-regulator.txt
 		- compatible: "mediatek,mt6358-regulator"
+		- compatible: "mediatek,mt6366-regulator", "mediatek-mt6358-regulator"
 	see ../regulator/mt6358-regulator.txt
 		- compatible: "mediatek,mt6397-regulator"
 	see ../regulator/mt6397-regulator.txt
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml
index e74502a0afe8..3202dc7967c5 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -337,8 +337,8 @@ allOf:
           minItems: 4
 
         clocks:
-          minItems: 34
-          maxItems: 34
+          minItems: 24
+          maxItems: 24
 
         clock-names:
           items:
@@ -351,18 +351,6 @@ allOf:
             - const: ethwarp_wocpu1
             - const: ethwarp_wocpu0
             - const: esw
-            - const: netsys0
-            - const: netsys1
-            - const: sgmii_tx250m
-            - const: sgmii_rx250m
-            - const: sgmii2_tx250m
-            - const: sgmii2_rx250m
-            - const: top_usxgmii0_sel
-            - const: top_usxgmii1_sel
-            - const: top_sgm0_sel
-            - const: top_sgm1_sel
-            - const: top_xfi_phy0_xtal_sel
-            - const: top_xfi_phy1_xtal_sel
             - const: top_eth_gmii_sel
             - const: top_eth_refck_50m_sel
             - const: top_eth_sys_200m_sel
@@ -375,16 +363,10 @@ allOf:
             - const: top_netsys_sync_250m_sel
             - const: top_netsys_ppefb_250m_sel
             - const: top_netsys_warp_sel
-            - const: wocpu1
-            - const: wocpu0
             - const: xgp1
             - const: xgp2
             - const: xgp3
 
-        mediatek,sgmiisys:
-          minItems: 2
-          maxItems: 2
-
 patternProperties:
   "^mac@[0-1]$":
     type: object
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index ddf9522a5dc2..5c2769dc689a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -394,6 +394,11 @@ properties:
               When a PFC frame is received with priorities matching the bitmask,
               the queue is blocked from transmitting for the pause time specified
               in the PFC frame.
+
+          snps,coe-unsupported:
+            type: boolean
+            description: TX checksum offload is unsupported by the TX queue.
+
         allOf:
           - if:
               required:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
index a9b822aeaa7e..e436650f0faf 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
@@ -14,9 +14,11 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx23-ocotp
-      - fsl,imx28-ocotp
+    items:
+      - enum:
+          - fsl,imx23-ocotp
+          - fsl,imx28-ocotp
+      - const: fsl,ocotp
 
   reg:
     maxItems: 1
@@ -34,7 +36,7 @@ unevaluatedProperties: false
 examples:
   - |
     ocotp: efuse@8002c000 {
-        compatible = "fsl,imx28-ocotp";
+        compatible = "fsl,imx28-ocotp", "fsl,ocotp";
         #address-cells = <1>;
         #size-cells = <1>;
         reg = <0x8002c000 0x2000>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
index 8fdfbc763d70..835b6db00c27 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -68,6 +68,18 @@ properties:
   phy-names:
     const: pcie
 
+  vpcie1v5-supply:
+    description: The 1.5v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
+  iommu-map: true
+  iommu-map-mask: true
+
 required:
   - compatible
   - reg
@@ -121,5 +133,7 @@ examples:
              clock-names = "pcie", "pcie_bus";
              power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
              resets = <&cpg 319>;
+             vpcie3v3-supply = <&pcie_3v3>;
+             vpcie12v-supply = <&pcie_12v>;
          };
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
index 531008f0b6ac..002b728cbc71 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
@@ -37,6 +37,7 @@ properties:
     description: This property is needed if using 24MHz OSC for RC's PHY.
 
   ep-gpios:
+    maxItems: 1
     description: pre-reset GPIO
 
   vpcie12v-supply:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index d981d77e82e4..a6244c33faf6 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -71,7 +71,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
@@ -130,6 +129,21 @@ allOf:
         clock-names:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+              - qcom,msm8998-qmp-ufs-phy
+    then:
+      properties:
+        power-domains:
+          false
+    else:
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index 9af203dc8793..fa7408eb7489 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -62,12 +62,12 @@ properties:
   "#clock-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   "#phy-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   orientation-switch:
     description:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
index 029569d5fcf3..24c733c10e0e 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
@@ -32,6 +32,27 @@ properties:
 
   vdd3-supply: true
 
+  qcom,tune-usb2-disc-thres:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed disconnect threshold
+    minimum: 0
+    maximum: 7
+    default: 0
+
+  qcom,tune-usb2-amplitude:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed trasmit amplitude
+    minimum: 0
+    maximum: 15
+    default: 8
+
+  qcom,tune-usb2-preem:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed TX pre-emphasis tuning
+    minimum: 0
+    maximum: 7
+    default: 5
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
index 0f200e3f97a9..fce7f8a19e9c 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -15,9 +15,6 @@ description: |
 properties:
   compatible:
     oneOf:
-      - enum:
-          - qcom,sc8180x-usb-hs-phy
-          - qcom,usb-snps-femto-v2-phy
       - items:
           - enum:
               - qcom,sa8775p-usb-hs-phy
@@ -26,6 +23,7 @@ properties:
       - items:
           - enum:
               - qcom,sc7280-usb-hs-phy
+              - qcom,sc8180x-usb-hs-phy
               - qcom,sdx55-usb-hs-phy
               - qcom,sdx65-usb-hs-phy
               - qcom,sm6375-usb-hs-phy
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index bd72a326e6e0..60f30a59f385 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -97,7 +97,8 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [emmc, emmc_rst]
+                  items:
+                    enum: [emmc, emmc_rst]
           - if:
               properties:
                 function:
@@ -105,8 +106,9 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
-                         rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
+                  items:
+                    enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
+                           rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
           - if:
               properties:
                 function:
@@ -123,10 +125,11 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
-                         i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
-                         i2s1_out_data, i2s2_out_data, i2s3_out_data,
-                         i2s4_out_data]
+                  items:
+                    enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
+                           i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
+                           i2s1_out_data, i2s2_out_data, i2s3_out_data,
+                           i2s4_out_data]
           - if:
               properties:
                 function:
@@ -159,10 +162,11 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
-                         pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
-                         pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
-                         pcie_wake, pcie_clkreq]
+                  items:
+                    enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
+                           pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
+                           pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
+                           pcie_wake, pcie_clkreq]
           - if:
               properties:
                 function:
@@ -178,11 +182,12 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
-                         pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
-                         pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
-                         pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
-                         pwm_ch7_0, pwm_0, pwm_1]
+                  items:
+                    enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
+                           pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
+                           pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
+                           pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
+                           pwm_ch7_0, pwm_0, pwm_1]
           - if:
               properties:
                 function:
@@ -260,33 +265,34 @@ patternProperties:
           pins:
             description:
               An array of strings. Each string contains the name of a pin.
-            enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
-                   RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
-                   I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
-                   I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
-                   G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
-                   G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
-                   NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
-                   MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
-                   MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
-                   MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
-                   MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
-                   PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
-                   GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
-                   PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
-                   AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
-                   PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
-                   WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
-                   WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
-                   EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
-                   EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
-                   WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
-                   UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
-                   UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
-                   PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
-                   GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
-                   TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
-                   WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
+            items:
+              enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
+                     RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
+                     I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
+                     I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
+                     G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
+                     G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
+                     NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
+                     MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
+                     MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
+                     MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
+                     MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
+                     PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
+                     GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
+                     PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
+                     AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
+                     PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
+                     WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
+                     WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
+                     EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
+                     EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
+                     WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
+                     UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
+                     UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
+                     PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
+                     GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
+                     TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
+                     WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
 
           bias-disable: true
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/rs485.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
index 303a443d9e29..9418fd66a8e9 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -29,6 +29,10 @@ properties:
           default: 0
           maximum: 100
 
+  rs485-rts-active-high:
+    description: drive RTS high when sending (this is the default).
+    $ref: /schemas/types.yaml#/definitions/flag
+
   rs485-rts-active-low:
     description: drive RTS low when sending (default is high).
     $ref: /schemas/types.yaml#/definitions/flag
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/serial.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/serial/serial.yaml
index ea277560a596..5727bd549dec 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/serial.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/serial/serial.yaml
@@ -96,7 +96,7 @@ then:
     rts-gpios: false
 
 patternProperties:
-  "^bluetooth|gnss|gps|mcu$":
+  "^(bluetooth|gnss|gps|mcu)$":
     if:
       type: object
     then:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index e4fa6a07b4fa..be6ffec2b074 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -163,6 +163,7 @@ allOf:
           unevaluatedProperties: false
 
         pcie-phy:
+          type: object
           description:
             Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/rt5645.txt linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/sound/rt5645.txt
index 41a62fd2ae1f..c1fa379f5f3e 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/rt5645.txt
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/sound/rt5645.txt
@@ -20,6 +20,11 @@ Optional properties:
   a GPIO spec for the external headphone detect pin. If jd-mode = 0,
   we will get the JD status by getting the value of hp-detect-gpios.
 
+- cbj-sleeve-gpios:
+  a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+  contacts to the ground or floating. It could avoid some electric noise from the
+  active speaker jacks.
+
 - realtek,in2-differential
   Boolean. Indicate MIC2 input are differential, rather than single-ended.
 
@@ -68,6 +73,7 @@ codec: rt5650@1a {
 	compatible = "realtek,rt5650";
 	reg = <0x1a>;
 	hp-detect-gpios = <&gpio 19 0>;
+	cbj-sleeve-gpios = <&gpio 20 0>;
 	interrupt-parent = <&gpio>;
 	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 	realtek,dmic-en = "true";
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
index f882903769f9..eee7c8d4cf4a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
@@ -14,7 +14,7 @@ description: |
   It is a MIPI System Power Management (SPMI) controller.
 
   The PMIC part is provided by
-  ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
 
 allOf:
   - $ref: spmi.yaml#
@@ -48,7 +48,7 @@ patternProperties:
       PMIC properties, which are specific to the used SPMI PMIC device(s).
       When used in combination with HiSilicon 6421v600, the properties
       are documented at
-      drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
+      Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
index 7538469997f9..ca81c8afba79 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
@@ -10,28 +10,55 @@ maintainers:
   - zhanghongchen <zhanghongchen@loongson.cn>
   - Yinbo Zhu <zhuyinbo@loongson.cn>
 
+allOf:
+  - $ref: /schemas/thermal/thermal-sensor.yaml#
+
 properties:
   compatible:
     oneOf:
       - enum:
           - loongson,ls2k1000-thermal
+          - loongson,ls2k2000-thermal
       - items:
           - enum:
-              - loongson,ls2k2000-thermal
+              - loongson,ls2k0500-thermal
           - const: loongson,ls2k1000-thermal
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   interrupts:
     maxItems: 1
 
+  '#thermal-sensor-cells':
+    const: 1
+
 required:
   - compatible
   - reg
   - interrupts
+  - '#thermal-sensor-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - loongson,ls2k2000-thermal
+
+then:
+  properties:
+    reg:
+      minItems: 2
+      maxItems: 2
+
+else:
+  properties:
+    reg:
+      maxItems: 1
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -41,4 +68,5 @@ examples:
         reg = <0x1fe01500 0x30>;
         interrupt-parent = <&liointc0>;
         interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+        #thermal-sensor-cells = <1>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index 4f3acdc4dec0..98cdd98212c4 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -49,7 +49,10 @@ properties:
       to take when the temperature crosses those thresholds.
 
 patternProperties:
-  "^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$":
+  # Node name is limited in size due to Linux kernel requirements - 19
+  # characters in total (see THERMAL_NAME_LENGTH, including terminating NUL
+  # byte):
+  "^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$":
     type: object
     description:
       Each thermal zone node contains information about how frequently it
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
index bffdab0b0185..fbac40b958dd 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
@@ -169,27 +169,27 @@ properties:
       - const: tgib0
       - const: tgic0
       - const: tgid0
-      - const: tgiv0
+      - const: tciv0
       - const: tgie0
       - const: tgif0
       - const: tgia1
       - const: tgib1
-      - const: tgiv1
-      - const: tgiu1
+      - const: tciv1
+      - const: tciu1
       - const: tgia2
       - const: tgib2
-      - const: tgiv2
-      - const: tgiu2
+      - const: tciv2
+      - const: tciu2
       - const: tgia3
       - const: tgib3
       - const: tgic3
       - const: tgid3
-      - const: tgiv3
+      - const: tciv3
       - const: tgia4
       - const: tgib4
       - const: tgic4
       - const: tgid4
-      - const: tgiv4
+      - const: tciv4
       - const: tgiu5
       - const: tgiv5
       - const: tgiw5
@@ -197,18 +197,18 @@ properties:
       - const: tgib6
       - const: tgic6
       - const: tgid6
-      - const: tgiv6
+      - const: tciv6
       - const: tgia7
       - const: tgib7
       - const: tgic7
       - const: tgid7
-      - const: tgiv7
+      - const: tciv7
       - const: tgia8
       - const: tgib8
       - const: tgic8
       - const: tgid8
-      - const: tgiv8
-      - const: tgiu8
+      - const: tciv8
+      - const: tciu8
 
   clocks:
     maxItems: 1
@@ -285,16 +285,16 @@ examples:
                    <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
                    <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
                    <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
-      interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tgiv0", "tgie0",
+      interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tciv0", "tgie0",
                         "tgif0",
-                        "tgia1", "tgib1", "tgiv1", "tgiu1",
-                        "tgia2", "tgib2", "tgiv2", "tgiu2",
-                        "tgia3", "tgib3", "tgic3", "tgid3", "tgiv3",
-                        "tgia4", "tgib4", "tgic4", "tgid4", "tgiv4",
+                        "tgia1", "tgib1", "tciv1", "tciu1",
+                        "tgia2", "tgib2", "tciv2", "tciu2",
+                        "tgia3", "tgib3", "tgic3", "tgid3", "tciv3",
+                        "tgia4", "tgib4", "tgic4", "tgid4", "tciv4",
                         "tgiu5", "tgiv5", "tgiw5",
-                        "tgia6", "tgib6", "tgic6", "tgid6", "tgiv6",
-                        "tgia7", "tgib7", "tgic7", "tgid7", "tgiv7",
-                        "tgia8", "tgib8", "tgic8", "tgid8", "tgiv8", "tgiu8";
+                        "tgia6", "tgib6", "tgic6", "tgid6", "tciv6",
+                        "tgia7", "tgib7", "tgic7", "tgid7", "tciv7",
+                        "tgia8", "tgib8", "tgic8", "tgid8", "tciv8", "tciu8";
       clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
       power-domains = <&cpg>;
       resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
index ff3a1707ef57..6d4cfd943f58 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
+++ linux-libre-6.6.46-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
@@ -36,7 +36,11 @@ properties:
 
   vdd-supply:
     description:
-      VDD power supply to the hub
+      3V3 power supply to the hub
+
+  vdd2-supply:
+    description:
+      1V2 power supply to the hub
 
   peer-hub:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -62,6 +66,7 @@ allOf:
       properties:
         reset-gpios: false
         vdd-supply: false
+        vdd2-supply: false
         peer-hub: false
         i2c-bus: false
     else:
diff --git linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-bridge.rst linux-libre-6.6.46-gnu/Documentation/driver-api/fpga/fpga-bridge.rst
index 604208534095..833f68fb0700 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-bridge.rst
+++ linux-libre-6.6.46-gnu/Documentation/driver-api/fpga/fpga-bridge.rst
@@ -6,9 +6,12 @@ API to implement a new FPGA bridge
 
 * struct fpga_bridge - The FPGA Bridge structure
 * struct fpga_bridge_ops - Low level Bridge driver ops
-* fpga_bridge_register() - Create and register a bridge
+* __fpga_bridge_register() - Create and register a bridge
 * fpga_bridge_unregister() - Unregister a bridge
 
+The helper macro ``fpga_bridge_register()`` automatically sets
+the module that registers the FPGA bridge as the owner.
+
 .. kernel-doc:: include/linux/fpga/fpga-bridge.h
    :functions: fpga_bridge
 
@@ -16,7 +19,7 @@ API to implement a new FPGA bridge
    :functions: fpga_bridge_ops
 
 .. kernel-doc:: drivers/fpga/fpga-bridge.c
-   :functions: fpga_bridge_register
+   :functions: __fpga_bridge_register
 
 .. kernel-doc:: drivers/fpga/fpga-bridge.c
    :functions: fpga_bridge_unregister
diff --git linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-mgr.rst linux-libre-6.6.46-gnu/Documentation/driver-api/fpga/fpga-mgr.rst
index 49c0a9512653..8d2b79f696c1 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-mgr.rst
+++ linux-libre-6.6.46-gnu/Documentation/driver-api/fpga/fpga-mgr.rst
@@ -24,7 +24,8 @@ How to support a new FPGA device
 --------------------------------
 
 To add another FPGA manager, write a driver that implements a set of ops.  The
-probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as::
+probe function calls ``fpga_mgr_register()`` or ``fpga_mgr_register_full()``,
+such as::
 
 	static const struct fpga_manager_ops socfpga_fpga_ops = {
 		.write_init = socfpga_fpga_ops_configure_init,
@@ -69,10 +70,11 @@ probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as::
 	}
 
 Alternatively, the probe function could call one of the resource managed
-register functions, devm_fpga_mgr_register() or devm_fpga_mgr_register_full().
-When these functions are used, the parameter syntax is the same, but the call
-to fpga_mgr_unregister() should be removed. In the above example, the
-socfpga_fpga_remove() function would not be required.
+register functions, ``devm_fpga_mgr_register()`` or
+``devm_fpga_mgr_register_full()``.  When these functions are used, the
+parameter syntax is the same, but the call to ``fpga_mgr_unregister()`` should be
+removed. In the above example, the ``socfpga_fpga_remove()`` function would not be
+required.
 
 The ops will implement whatever device specific register writes are needed to
 do the programming sequence for this particular FPGA.  These ops return 0 for
@@ -125,15 +127,19 @@ API for implementing a new FPGA Manager driver
 * struct fpga_manager -  the FPGA manager struct
 * struct fpga_manager_ops -  Low level FPGA manager driver ops
 * struct fpga_manager_info -  Parameter structure for fpga_mgr_register_full()
-* fpga_mgr_register_full() -  Create and register an FPGA manager using the
+* __fpga_mgr_register_full() -  Create and register an FPGA manager using the
   fpga_mgr_info structure to provide the full flexibility of options
-* fpga_mgr_register() -  Create and register an FPGA manager using standard
+* __fpga_mgr_register() -  Create and register an FPGA manager using standard
   arguments
-* devm_fpga_mgr_register_full() -  Resource managed version of
-  fpga_mgr_register_full()
-* devm_fpga_mgr_register() -  Resource managed version of fpga_mgr_register()
+* __devm_fpga_mgr_register_full() -  Resource managed version of
+  __fpga_mgr_register_full()
+* __devm_fpga_mgr_register() -  Resource managed version of __fpga_mgr_register()
 * fpga_mgr_unregister() -  Unregister an FPGA manager
 
+Helper macros ``fpga_mgr_register_full()``, ``fpga_mgr_register()``,
+``devm_fpga_mgr_register_full()``, and ``devm_fpga_mgr_register()`` are available
+to ease the registration.
+
 .. kernel-doc:: include/linux/fpga/fpga-mgr.h
    :functions: fpga_mgr_states
 
@@ -147,16 +153,16 @@ API for implementing a new FPGA Manager driver
    :functions: fpga_manager_info
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: fpga_mgr_register_full
+   :functions: __fpga_mgr_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: fpga_mgr_register
+   :functions: __fpga_mgr_register
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: devm_fpga_mgr_register_full
+   :functions: __devm_fpga_mgr_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: devm_fpga_mgr_register
+   :functions: __devm_fpga_mgr_register
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
    :functions: fpga_mgr_unregister
diff --git linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-region.rst linux-libre-6.6.46-gnu/Documentation/driver-api/fpga/fpga-region.rst
index dc55d60a0b4a..2d03b5fb7657 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-region.rst
+++ linux-libre-6.6.46-gnu/Documentation/driver-api/fpga/fpga-region.rst
@@ -46,13 +46,16 @@ API to add a new FPGA region
 ----------------------------
 
 * struct fpga_region - The FPGA region struct
-* struct fpga_region_info - Parameter structure for fpga_region_register_full()
-* fpga_region_register_full() -  Create and register an FPGA region using the
+* struct fpga_region_info - Parameter structure for __fpga_region_register_full()
+* __fpga_region_register_full() -  Create and register an FPGA region using the
   fpga_region_info structure to provide the full flexibility of options
-* fpga_region_register() -  Create and register an FPGA region using standard
+* __fpga_region_register() -  Create and register an FPGA region using standard
   arguments
 * fpga_region_unregister() -  Unregister an FPGA region
 
+Helper macros ``fpga_region_register()`` and ``fpga_region_register_full()``
+automatically set the module that registers the FPGA region as the owner.
+
 The FPGA region's probe function will need to get a reference to the FPGA
 Manager it will be using to do the programming.  This usually would happen
 during the region's probe function.
@@ -82,10 +85,10 @@ following APIs to handle building or tearing down that list.
    :functions: fpga_region_info
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: fpga_region_register_full
+   :functions: __fpga_region_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: fpga_region_register
+   :functions: __fpga_region_register
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
    :functions: fpga_region_unregister
diff --git linux-libre-6.6-gnu/Documentation/driver-api/pci/p2pdma.rst linux-libre-6.6.46-gnu/Documentation/driver-api/pci/p2pdma.rst
index 44deb52beeb4..d0b241628cf1 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/pci/p2pdma.rst
+++ linux-libre-6.6.46-gnu/Documentation/driver-api/pci/p2pdma.rst
@@ -83,19 +83,9 @@ this to include other types of resources like doorbells.
 Client Drivers
 --------------
 
-A client driver typically only has to conditionally change its DMA map
-routine to use the mapping function :c:func:`pci_p2pdma_map_sg()` instead
-of the usual :c:func:`dma_map_sg()` function. Memory mapped in this
-way does not need to be unmapped.
-
-The client may also, optionally, make use of
-:c:func:`is_pci_p2pdma_page()` to determine when to use the P2P mapping
-functions and when to use the regular mapping functions. In some
-situations, it may be more appropriate to use a flag to indicate a
-given request is P2P memory and map appropriately. It is important to
-ensure that struct pages that back P2P memory stay out of code that
-does not have support for them as other code may treat the pages as
-regular memory which may not be appropriate.
+A client driver only has to use the mapping API :c:func:`dma_map_sg()`
+and :c:func:`dma_unmap_sg()` functions as usual, and the implementation
+will do the right thing for the P2P capable memory.
 
 
 Orchestrator Drivers
diff --git linux-libre-6.6-gnu/Documentation/driver-api/pwm.rst linux-libre-6.6.46-gnu/Documentation/driver-api/pwm.rst
index 3fdc95f7a1d1..ed5ec9816538 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/pwm.rst
+++ linux-libre-6.6.46-gnu/Documentation/driver-api/pwm.rst
@@ -41,7 +41,7 @@ the getter, devm_pwm_get() and devm_fwnode_pwm_get(), also exist.
 
 After being requested, a PWM has to be configured using::
 
-	int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state);
+	int pwm_apply_might_sleep(struct pwm_device *pwm, struct pwm_state *state);
 
 This API controls both the PWM period/duty_cycle config and the
 enable/disable state.
@@ -57,13 +57,13 @@ If supported by the driver, the signal can be optimized, for example to improve
 EMI by phase shifting the individual channels of a chip.
 
 The pwm_config(), pwm_enable() and pwm_disable() functions are just wrappers
-around pwm_apply_state() and should not be used if the user wants to change
+around pwm_apply_might_sleep() and should not be used if the user wants to change
 several parameter at once. For example, if you see pwm_config() and
 pwm_{enable,disable}() calls in the same function, this probably means you
-should switch to pwm_apply_state().
+should switch to pwm_apply_might_sleep().
 
 The PWM user API also allows one to query the PWM state that was passed to the
-last invocation of pwm_apply_state() using pwm_get_state(). Note this is
+last invocation of pwm_apply_might_sleep() using pwm_get_state(). Note this is
 different to what the driver has actually implemented if the request cannot be
 satisfied exactly with the hardware in use. There is currently no way for
 consumers to get the actually implemented settings.
diff --git linux-libre-6.6-gnu/Documentation/filesystems/directory-locking.rst linux-libre-6.6.46-gnu/Documentation/filesystems/directory-locking.rst
index dccd61c7c5c3..193c22687851 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/directory-locking.rst
+++ linux-libre-6.6.46-gnu/Documentation/filesystems/directory-locking.rst
@@ -22,13 +22,16 @@ exclusive.
 3) object removal.  Locking rules: caller locks parent, finds victim,
 locks victim and calls the method.  Locks are exclusive.
 
-4) rename() that is _not_ cross-directory.  Locking rules: caller locks the
-parent and finds source and target.  We lock both (provided they exist).  If we
-need to lock two inodes of different type (dir vs non-dir), we lock directory
-first.  If we need to lock two inodes of the same type, lock them in inode
-pointer order.  Then call the method.  All locks are exclusive.
-NB: we might get away with locking the source (and target in exchange
-case) shared.
+4) rename() that is _not_ cross-directory.  Locking rules: caller locks
+the parent and finds source and target.  Then we decide which of the
+source and target need to be locked.  Source needs to be locked if it's a
+non-directory; target - if it's a non-directory or about to be removed.
+Take the locks that need to be taken, in inode pointer order if need
+to take both (that can happen only when both source and target are
+non-directories - the source because it wouldn't be locked otherwise
+and the target because mixing directory and non-directory is allowed
+only with RENAME_EXCHANGE, and that won't be removing the target).
+After the locks had been taken, call the method.  All locks are exclusive.
 
 5) link creation.  Locking rules:
 
@@ -44,20 +47,17 @@ rules:
 
 	* lock the filesystem
 	* lock parents in "ancestors first" order. If one is not ancestor of
-	  the other, lock them in inode pointer order.
+	  the other, lock the parent of source first.
 	* find source and target.
 	* if old parent is equal to or is a descendent of target
 	  fail with -ENOTEMPTY
 	* if new parent is equal to or is a descendent of source
 	  fail with -ELOOP
-	* Lock both the source and the target provided they exist. If we
-	  need to lock two inodes of different type (dir vs non-dir), we lock
-	  the directory first. If we need to lock two inodes of the same type,
-	  lock them in inode pointer order.
+	* Lock subdirectories involved (source before target).
+	* Lock non-directories involved, in inode pointer order.
 	* call the method.
 
-All ->i_rwsem are taken exclusive.  Again, we might get away with locking
-the source (and target in exchange case) shared.
+All ->i_rwsem are taken exclusive.
 
 The rules above obviously guarantee that all directories that are going to be
 read, modified or removed by method will be locked by caller.
@@ -67,6 +67,7 @@ If no directory is its own ancestor, the scheme above is deadlock-free.
 
 Proof:
 
+[XXX: will be updated once we are done massaging the lock_rename()]
 	First of all, at any moment we have a linear ordering of the
 	objects - A < B iff (A is an ancestor of B) or (B is not an ancestor
         of A and ptr(A) < ptr(B)).
diff --git linux-libre-6.6-gnu/Documentation/filesystems/f2fs.rst linux-libre-6.6.46-gnu/Documentation/filesystems/f2fs.rst
index d32c6209685d..dbfbbe9ab28b 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/f2fs.rst
+++ linux-libre-6.6.46-gnu/Documentation/filesystems/f2fs.rst
@@ -126,9 +126,7 @@ norecovery		 Disable the roll-forward recovery routine, mounted read-
 discard/nodiscard	 Enable/disable real-time discard in f2fs, if discard is
 			 enabled, f2fs will issue discard/TRIM commands when a
 			 segment is cleaned.
-no_heap			 Disable heap-style segment allocation which finds free
-			 segments for data from the beginning of main area, while
-			 for node from the end of main area.
+heap/no_heap		 Deprecated.
 nouser_xattr		 Disable Extended User Attributes. Note: xattr is enabled
 			 by default if CONFIG_F2FS_FS_XATTR is selected.
 noacl			 Disable POSIX Access Control List. Note: acl is enabled
@@ -228,8 +226,6 @@ mode=%s			 Control block allocation mode which supports "adaptive"
 			 option for more randomness.
 			 Please, use these options for your experiments and we strongly
 			 recommend to re-format the filesystem after using these options.
-io_bits=%u		 Set the bit size of write IO requests. It should be set
-			 with "mode=lfs".
 usrquota		 Enable plain user disk quota accounting.
 grpquota		 Enable plain group disk quota accounting.
 prjquota		 Enable plain project quota accounting.
diff --git linux-libre-6.6-gnu/Documentation/filesystems/locking.rst linux-libre-6.6.46-gnu/Documentation/filesystems/locking.rst
index 7be2900806c8..bd12f2f850ad 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/locking.rst
+++ linux-libre-6.6.46-gnu/Documentation/filesystems/locking.rst
@@ -101,7 +101,7 @@ symlink:	exclusive
 mkdir:		exclusive
 unlink:		exclusive (both)
 rmdir:		exclusive (both)(see below)
-rename:		exclusive (all)	(see below)
+rename:		exclusive (both parents, some children)	(see below)
 readlink:	no
 get_link:	no
 setattr:	exclusive
@@ -123,6 +123,9 @@ get_offset_ctx  no
 	Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_rwsem
 	exclusive on victim.
 	cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.
+	->unlink() and ->rename() have ->i_rwsem exclusive on all non-directories
+	involved.
+	->rename() has ->i_rwsem exclusive on any subdirectory that changes parent.
 
 See Documentation/filesystems/directory-locking.rst for more detailed discussion
 of the locking scheme for directory operations.
diff --git linux-libre-6.6-gnu/Documentation/filesystems/overlayfs.rst linux-libre-6.6.46-gnu/Documentation/filesystems/overlayfs.rst
index 5b93268e400f..56a5ad7a4fbd 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/overlayfs.rst
+++ linux-libre-6.6.46-gnu/Documentation/filesystems/overlayfs.rst
@@ -344,10 +344,11 @@ escaping the colons with a single backslash.  For example:
 
   mount -t overlay overlay -olowerdir=/a\:lower\:\:dir /merged
 
-Since kernel version v6.5, directory names containing colons can also
-be provided as lower layer using the fsconfig syscall from new mount api:
+Since kernel version v6.8, directory names containing colons can also
+be configured as lower layer using the "lowerdir+" mount options and the
+fsconfig syscall from new mount api.  For example:
 
-  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/a:lower::dir", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/a:lower::dir", 0);
 
 In the latter case, colons in lower layer directory names will be escaped
 as an octal characters (\072) when displayed in /proc/self/mountinfo.
@@ -416,6 +417,16 @@ Only the data of the files in the "data-only" lower layers may be visible
 when a "metacopy" file in one of the lower layers above it, has a "redirect"
 to the absolute path of the "lower data" file in the "data-only" lower layer.
 
+Since kernel version v6.8, "data-only" lower layers can also be added using
+the "datadir+" mount options and the fsconfig syscall from new mount api.
+For example:
+
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l1", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l2", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l3", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "datadir+", "/do1", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "datadir+", "/do2", 0);
+
 
 fs-verity support
 ----------------------
diff --git linux-libre-6.6-gnu/Documentation/filesystems/porting.rst linux-libre-6.6.46-gnu/Documentation/filesystems/porting.rst
index 4d05b9862451..41d964b48e65 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/porting.rst
+++ linux-libre-6.6.46-gnu/Documentation/filesystems/porting.rst
@@ -1045,3 +1045,21 @@ filesystem type is now moved to a later point when the devices are closed:
 As this is a VFS level change it has no practical consequences for filesystems
 other than that all of them must use one of the provided kill_litter_super(),
 kill_anon_super(), or kill_block_super() helpers.
+
+---
+
+**mandatory**
+
+If ->rename() update of .. on cross-directory move needs an exclusion with
+directory modifications, do *not* lock the subdirectory in question in your
+->rename() - it's done by the caller now [that item should've been added in
+28eceeda130f "fs: Lock moved directories"].
+
+---
+
+**mandatory**
+
+On same-directory ->rename() the (tautological) update of .. is not protected
+by any locks; just don't do it if the old parent is the same as the new one.
+We really can't lock two subdirectories in same-directory rename - not without
+deadlocks.
diff --git linux-libre-6.6-gnu/Documentation/gpu/drm-kms.rst linux-libre-6.6.46-gnu/Documentation/gpu/drm-kms.rst
index a0c83fc48126..690d2ffe720e 100644
--- linux-libre-6.6-gnu/Documentation/gpu/drm-kms.rst
+++ linux-libre-6.6.46-gnu/Documentation/gpu/drm-kms.rst
@@ -546,6 +546,8 @@ Plane Composition Properties
 .. kernel-doc:: drivers/gpu/drm/drm_blend.c
    :doc: overview
 
+.. _damage_tracking_properties:
+
 Damage Tracking Properties
 --------------------------
 
diff --git linux-libre-6.6-gnu/Documentation/gpu/todo.rst linux-libre-6.6.46-gnu/Documentation/gpu/todo.rst
index 03fe5d1247be..85bbe0543609 100644
--- linux-libre-6.6-gnu/Documentation/gpu/todo.rst
+++ linux-libre-6.6.46-gnu/Documentation/gpu/todo.rst
@@ -337,8 +337,8 @@ connector register/unregister fixes
 
 Level: Intermediate
 
-Remove load/unload callbacks from all non-DRIVER_LEGACY drivers
----------------------------------------------------------------
+Remove load/unload callbacks
+----------------------------
 
 The load/unload callbacks in struct &drm_driver are very much midlayers, plus
 for historical reasons they get the ordering wrong (and we can't fix that)
@@ -347,8 +347,7 @@ between setting up the &drm_driver structure and calling drm_dev_register().
 - Rework drivers to no longer use the load/unload callbacks, directly coding the
   load/unload sequence into the driver's probe function.
 
-- Once all non-DRIVER_LEGACY drivers are converted, disallow the load/unload
-  callbacks for all modern drivers.
+- Once all drivers are converted, remove the load/unload callbacks.
 
 Contact: Daniel Vetter
 
diff --git linux-libre-6.6-gnu/Documentation/hwmon/corsair-psu.rst linux-libre-6.6.46-gnu/Documentation/hwmon/corsair-psu.rst
index 16db34d464dd..7ed794087f84 100644
--- linux-libre-6.6-gnu/Documentation/hwmon/corsair-psu.rst
+++ linux-libre-6.6.46-gnu/Documentation/hwmon/corsair-psu.rst
@@ -15,11 +15,11 @@ Supported devices:
 
   Corsair HX850i
 
-  Corsair HX1000i (Series 2022 and 2023)
+  Corsair HX1000i (Legacy and Series 2023)
 
-  Corsair HX1200i
+  Corsair HX1200i (Legacy and Series 2023)
 
-  Corsair HX1500i (Series 2022 and 2023)
+  Corsair HX1500i (Legacy and Series 2023)
 
   Corsair RM550i
 
diff --git linux-libre-6.6-gnu/Documentation/i2c/busses/i2c-i801.rst linux-libre-6.6.46-gnu/Documentation/i2c/busses/i2c-i801.rst
index e76e68ccf718..10eced6c2e46 100644
--- linux-libre-6.6-gnu/Documentation/i2c/busses/i2c-i801.rst
+++ linux-libre-6.6.46-gnu/Documentation/i2c/busses/i2c-i801.rst
@@ -47,6 +47,7 @@ Supported adapters:
   * Intel Alder Lake (PCH)
   * Intel Raptor Lake (PCH)
   * Intel Meteor Lake (SOC and PCH)
+  * Intel Birch Stream (SOC)
 
    Datasheets: Publicly available at the Intel website
 
diff --git linux-libre-6.6-gnu/Documentation/kbuild/modules.rst linux-libre-6.6.46-gnu/Documentation/kbuild/modules.rst
index a1f3eb7a43e2..131863142cbb 100644
--- linux-libre-6.6-gnu/Documentation/kbuild/modules.rst
+++ linux-libre-6.6.46-gnu/Documentation/kbuild/modules.rst
@@ -128,7 +128,7 @@ executed to make module versioning work.
 
 	modules_install
 		Install the external module(s). The default location is
-		/lib/modules/<kernel_release>/extra/, but a prefix may
+		/lib/modules/<kernel_release>/updates/, but a prefix may
 		be added with INSTALL_MOD_PATH (discussed in section 5).
 
 	clean
@@ -417,7 +417,7 @@ directory:
 
 And external modules are installed in:
 
-	/lib/modules/$(KERNELRELEASE)/extra/
+	/lib/modules/$(KERNELRELEASE)/updates/
 
 5.1 INSTALL_MOD_PATH
 --------------------
@@ -438,10 +438,10 @@ And external modules are installed in:
 -------------------
 
 	External modules are by default installed to a directory under
-	/lib/modules/$(KERNELRELEASE)/extra/, but you may wish to
+	/lib/modules/$(KERNELRELEASE)/updates/, but you may wish to
 	locate modules for a specific functionality in a separate
 	directory. For this purpose, use INSTALL_MOD_DIR to specify an
-	alternative name to "extra."::
+	alternative name to "updates."::
 
 		$ make INSTALL_MOD_DIR=gandalf -C $KDIR \
 		       M=$PWD modules_install
diff --git linux-libre-6.6-gnu/Documentation/mm/arch_pgtable_helpers.rst linux-libre-6.6.46-gnu/Documentation/mm/arch_pgtable_helpers.rst
index c82e3ee20e51..8c71249e7c4d 100644
--- linux-libre-6.6-gnu/Documentation/mm/arch_pgtable_helpers.rst
+++ linux-libre-6.6.46-gnu/Documentation/mm/arch_pgtable_helpers.rst
@@ -142,7 +142,8 @@ PMD Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pmd_swp_clear_soft_dirty  | Clears a soft dirty swapped PMD                  |
 +---------------------------+--------------------------------------------------+
-| pmd_mkinvalid             | Invalidates a mapped PMD [1]                     |
+| pmd_mkinvalid             | Invalidates a present PMD; do not call for       |
+|                           | non-present PMD [1]                              |
 +---------------------------+--------------------------------------------------+
 | pmd_set_huge              | Creates a PMD huge mapping                       |
 +---------------------------+--------------------------------------------------+
@@ -198,7 +199,8 @@ PUD Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pud_mkdevmap              | Creates a ZONE_DEVICE mapped PUD                 |
 +---------------------------+--------------------------------------------------+
-| pud_mkinvalid             | Invalidates a mapped PUD [1]                     |
+| pud_mkinvalid             | Invalidates a present PUD; do not call for       |
+|                           | non-present PUD [1]                              |
 +---------------------------+--------------------------------------------------+
 | pud_set_huge              | Creates a PUD huge mapping                       |
 +---------------------------+--------------------------------------------------+
diff --git linux-libre-6.6-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst linux-libre-6.6.46-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
index 5eaa3ab6c73e..b842bcb14255 100644
--- linux-libre-6.6-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
+++ linux-libre-6.6.46-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
@@ -54,6 +54,7 @@ ena_common_defs.h   Common definitions for ena_com layer.
 ena_regs_defs.h     Definition of ENA PCI memory-mapped (MMIO) registers.
 ena_netdev.[ch]     Main Linux kernel driver.
 ena_ethtool.c       ethtool callbacks.
+ena_xdp.[ch]        XDP files
 ena_pci_id_tbl.h    Supported device IDs.
 =================   ======================================================
 
diff --git linux-libre-6.6-gnu/Documentation/networking/devlink/devlink-port.rst linux-libre-6.6.46-gnu/Documentation/networking/devlink/devlink-port.rst
index e33ad2401ad7..562f46b41274 100644
--- linux-libre-6.6-gnu/Documentation/networking/devlink/devlink-port.rst
+++ linux-libre-6.6.46-gnu/Documentation/networking/devlink/devlink-port.rst
@@ -126,7 +126,7 @@ Users may also set the RoCE capability of the function using
 `devlink port function set roce` command.
 
 Users may also set the function as migratable using
-'devlink port function set migratable' command.
+`devlink port function set migratable` command.
 
 Users may also set the IPsec crypto capability of the function using
 `devlink port function set ipsec_crypto` command.
diff --git linux-libre-6.6-gnu/Documentation/powerpc/features.rst linux-libre-6.6.46-gnu/Documentation/powerpc/features.rst
index aeae73df86b0..ee4b95e04202 100644
--- linux-libre-6.6-gnu/Documentation/powerpc/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/powerpc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features powerpc
+.. kernel-feat:: features powerpc
diff --git linux-libre-6.6-gnu/Documentation/process/changes.rst linux-libre-6.6.46-gnu/Documentation/process/changes.rst
index b48da698d6f2..bb96ca0f774b 100644
--- linux-libre-6.6-gnu/Documentation/process/changes.rst
+++ linux-libre-6.6.46-gnu/Documentation/process/changes.rst
@@ -31,7 +31,7 @@ you probably needn't concern yourself with pcmciautils.
 ====================== ===============  ========================================
 GNU C                  5.1              gcc --version
 Clang/LLVM (optional)  11.0.0           clang --version
-Rust (optional)        1.71.1           rustc --version
+Rust (optional)        1.73.0           rustc --version
 bindgen (optional)     0.65.1           bindgen --version
 GNU make               3.82             make --version
 bash                   4.2              bash --version
diff --git linux-libre-6.6-gnu/Documentation/riscv/features.rst linux-libre-6.6.46-gnu/Documentation/riscv/features.rst
index c70ef6ac2368..36e90144adab 100644
--- linux-libre-6.6-gnu/Documentation/riscv/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/riscv/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features riscv
+.. kernel-feat:: features riscv
diff --git linux-libre-6.6-gnu/Documentation/sound/soc/dapm.rst linux-libre-6.6.46-gnu/Documentation/sound/soc/dapm.rst
index 8e44107933ab..c3154ce6e1b2 100644
--- linux-libre-6.6-gnu/Documentation/sound/soc/dapm.rst
+++ linux-libre-6.6.46-gnu/Documentation/sound/soc/dapm.rst
@@ -234,7 +234,7 @@ corresponding soft power control. In this case it is necessary to create
 a virtual widget - a widget with no control bits e.g.
 ::
 
-  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_DAPM_NOPM, 0, 0, NULL, 0),
+  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 
 This can be used to merge to signal paths together in software.
 
diff --git linux-libre-6.6-gnu/Documentation/sphinx/cdomain.py linux-libre-6.6.46-gnu/Documentation/sphinx/cdomain.py
index a99716bf44b5..de5d132d94c5 100644
--- linux-libre-6.6-gnu/Documentation/sphinx/cdomain.py
+++ linux-libre-6.6.46-gnu/Documentation/sphinx/cdomain.py
@@ -93,7 +93,7 @@ def markup_ctype_refs(match):
 #
 RE_expr = re.compile(r':c:(expr|texpr):`([^\`]+)`')
 def markup_c_expr(match):
-    return '\ ``' + match.group(2) + '``\ '
+    return '\\ ``' + match.group(2) + '``\\ '
 
 #
 # Parse Sphinx 3.x C markups, replacing them by backward-compatible ones
diff --git linux-libre-6.6-gnu/Documentation/sphinx/kernel_abi.py linux-libre-6.6.46-gnu/Documentation/sphinx/kernel_abi.py
index b5feb5b1d905..5911bd0d7965 100644
--- linux-libre-6.6-gnu/Documentation/sphinx/kernel_abi.py
+++ linux-libre-6.6.46-gnu/Documentation/sphinx/kernel_abi.py
@@ -39,8 +39,6 @@ import sys
 import re
 import kernellog
 
-from os import path
-
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
 from docutils.parsers.rst import directives, Directive
@@ -73,60 +71,26 @@ class KernelCmd(Directive):
     }
 
     def run(self):
-
         doc = self.state.document
         if not doc.settings.file_insertion_enabled:
             raise self.warning("docutils: file insertion disabled")
 
-        env = doc.settings.env
-        cwd = path.dirname(doc.current_source)
-        cmd = "get_abi.pl rest --enable-lineno --dir "
-        cmd += self.arguments[0]
-
-        if 'rst' in self.options:
-            cmd += " --rst-source"
+        srctree = os.path.abspath(os.environ["srctree"])
 
-        srctree = path.abspath(os.environ["srctree"])
+        args = [
+            os.path.join(srctree, 'scripts/get_abi.pl'),
+            'rest',
+            '--enable-lineno',
+            '--dir', os.path.join(srctree, 'Documentation', self.arguments[0]),
+        ]
 
-        fname = cmd
-
-        # extend PATH with $(srctree)/scripts
-        path_env = os.pathsep.join([
-            srctree + os.sep + "scripts",
-            os.environ["PATH"]
-        ])
-        shell_env = os.environ.copy()
-        shell_env["PATH"]    = path_env
-        shell_env["srctree"] = srctree
+        if 'rst' in self.options:
+            args.append('--rst-source')
 
-        lines = self.runCmd(cmd, shell=True, cwd=cwd, env=shell_env)
+        lines = subprocess.check_output(args, cwd=os.path.dirname(doc.current_source)).decode('utf-8')
         nodeList = self.nestedParse(lines, self.arguments[0])
         return nodeList
 
-    def runCmd(self, cmd, **kwargs):
-        u"""Run command ``cmd`` and return its stdout as unicode."""
-
-        try:
-            proc = subprocess.Popen(
-                cmd
-                , stdout = subprocess.PIPE
-                , stderr = subprocess.PIPE
-                , **kwargs
-            )
-            out, err = proc.communicate()
-
-            out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8')
-
-            if proc.returncode != 0:
-                raise self.severe(
-                    u"command '%s' failed with return code %d"
-                    % (cmd, proc.returncode)
-                )
-        except OSError as exc:
-            raise self.severe(u"problems with '%s' directive: %s."
-                              % (self.name, ErrorString(exc)))
-        return out
-
     def nestedParse(self, lines, fname):
         env = self.state.document.settings.env
         content = ViewList()
@@ -138,7 +102,7 @@ class KernelCmd(Directive):
                 code_block += "\n    " + l
             lines = code_block + "\n\n"
 
-        line_regex = re.compile("^\.\. LINENO (\S+)\#([0-9]+)$")
+        line_regex = re.compile(r"^\.\. LINENO (\S+)\#([0-9]+)$")
         ln = 0
         n = 0
         f = fname
diff --git linux-libre-6.6-gnu/Documentation/sphinx/kernel_feat.py linux-libre-6.6.46-gnu/Documentation/sphinx/kernel_feat.py
index 27b701ed3681..03ace5f01b5c 100644
--- linux-libre-6.6-gnu/Documentation/sphinx/kernel_feat.py
+++ linux-libre-6.6.46-gnu/Documentation/sphinx/kernel_feat.py
@@ -37,8 +37,6 @@ import re
 import subprocess
 import sys
 
-from os import path
-
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
 from docutils.parsers.rst import directives, Directive
@@ -76,35 +74,28 @@ class KernelFeat(Directive):
         self.state.document.settings.env.app.warn(message, prefix="")
 
     def run(self):
-
         doc = self.state.document
         if not doc.settings.file_insertion_enabled:
             raise self.warning("docutils: file insertion disabled")
 
         env = doc.settings.env
-        cwd = path.dirname(doc.current_source)
-        cmd = "get_feat.pl rest --enable-fname --dir "
-        cmd += self.arguments[0]
-
-        if len(self.arguments) > 1:
-            cmd += " --arch " + self.arguments[1]
 
-        srctree = path.abspath(os.environ["srctree"])
+        srctree = os.path.abspath(os.environ["srctree"])
 
-        fname = cmd
+        args = [
+            os.path.join(srctree, 'scripts/get_feat.pl'),
+            'rest',
+            '--enable-fname',
+            '--dir',
+            os.path.join(srctree, 'Documentation', self.arguments[0]),
+        ]
 
-        # extend PATH with $(srctree)/scripts
-        path_env = os.pathsep.join([
-            srctree + os.sep + "scripts",
-            os.environ["PATH"]
-        ])
-        shell_env = os.environ.copy()
-        shell_env["PATH"]    = path_env
-        shell_env["srctree"] = srctree
+        if len(self.arguments) > 1:
+            args.extend(['--arch', self.arguments[1]])
 
-        lines = self.runCmd(cmd, shell=True, cwd=cwd, env=shell_env)
+        lines = subprocess.check_output(args, cwd=os.path.dirname(doc.current_source)).decode('utf-8')
 
-        line_regex = re.compile("^\.\. FILE (\S+)$")
+        line_regex = re.compile(r"^\.\. FILE (\S+)$")
 
         out_lines = ""
 
@@ -118,33 +109,9 @@ class KernelFeat(Directive):
             else:
                 out_lines += line + "\n"
 
-        nodeList = self.nestedParse(out_lines, fname)
+        nodeList = self.nestedParse(out_lines, self.arguments[0])
         return nodeList
 
-    def runCmd(self, cmd, **kwargs):
-        u"""Run command ``cmd`` and return its stdout as unicode."""
-
-        try:
-            proc = subprocess.Popen(
-                cmd
-                , stdout = subprocess.PIPE
-                , stderr = subprocess.PIPE
-                , **kwargs
-            )
-            out, err = proc.communicate()
-
-            out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8')
-
-            if proc.returncode != 0:
-                raise self.severe(
-                    u"command '%s' failed with return code %d"
-                    % (cmd, proc.returncode)
-                )
-        except OSError as exc:
-            raise self.severe(u"problems with '%s' directive: %s."
-                              % (self.name, ErrorString(exc)))
-        return out
-
     def nestedParse(self, lines, fname):
         content = ViewList()
         node    = nodes.section()
diff --git linux-libre-6.6-gnu/Documentation/sphinx/kernel_include.py linux-libre-6.6.46-gnu/Documentation/sphinx/kernel_include.py
index abe768088377..638762442336 100755
--- linux-libre-6.6-gnu/Documentation/sphinx/kernel_include.py
+++ linux-libre-6.6.46-gnu/Documentation/sphinx/kernel_include.py
@@ -97,7 +97,6 @@ class KernelInclude(Include):
         # HINT: this is the only line I had to change / commented out:
         #path = utils.relative_path(None, path)
 
-        path = nodes.reprunicode(path)
         encoding = self.options.get(
             'encoding', self.state.document.settings.input_encoding)
         e_handler=self.state.document.settings.input_encoding_error_handler
diff --git linux-libre-6.6-gnu/Documentation/sphinx/kerneldoc.py linux-libre-6.6.46-gnu/Documentation/sphinx/kerneldoc.py
index 9395892c7ba3..8dc134904b90 100644
--- linux-libre-6.6-gnu/Documentation/sphinx/kerneldoc.py
+++ linux-libre-6.6.46-gnu/Documentation/sphinx/kerneldoc.py
@@ -130,7 +130,7 @@ class KernelDocDirective(Directive):
             result = ViewList()
 
             lineoffset = 0;
-            line_regex = re.compile("^\.\. LINENO ([0-9]+)$")
+            line_regex = re.compile(r"^\.\. LINENO ([0-9]+)$")
             for line in lines:
                 match = line_regex.search(line)
                 if match:
diff --git linux-libre-6.6-gnu/Documentation/sphinx/maintainers_include.py linux-libre-6.6.46-gnu/Documentation/sphinx/maintainers_include.py
index 328b3631a585..dcad0fff4723 100755
--- linux-libre-6.6-gnu/Documentation/sphinx/maintainers_include.py
+++ linux-libre-6.6.46-gnu/Documentation/sphinx/maintainers_include.py
@@ -77,7 +77,7 @@ class MaintainersInclude(Include):
             line = line.rstrip()
 
             # Linkify all non-wildcard refs to ReST files in Documentation/.
-            pat = '(Documentation/([^\s\?\*]*)\.rst)'
+            pat = r'(Documentation/([^\s\?\*]*)\.rst)'
             m = re.search(pat, line)
             if m:
                 # maintainers.rst is in a subdirectory, so include "../".
@@ -90,11 +90,11 @@ class MaintainersInclude(Include):
                 output = "| %s" % (line.replace("\\", "\\\\"))
                 # Look for and record field letter to field name mappings:
                 #   R: Designated *reviewer*: FullName <address@domain>
-                m = re.search("\s(\S):\s", line)
+                m = re.search(r"\s(\S):\s", line)
                 if m:
                     field_letter = m.group(1)
                 if field_letter and not field_letter in fields:
-                    m = re.search("\*([^\*]+)\*", line)
+                    m = re.search(r"\*([^\*]+)\*", line)
                     if m:
                         fields[field_letter] = m.group(1)
             elif subsystems:
@@ -112,7 +112,7 @@ class MaintainersInclude(Include):
                     field_content = ""
 
                     # Collapse whitespace in subsystem name.
-                    heading = re.sub("\s+", " ", line)
+                    heading = re.sub(r"\s+", " ", line)
                     output = output + "%s\n%s" % (heading, "~" * len(heading))
                     field_prev = ""
                 else:
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst linux-libre-6.6.46-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst
index 82bfac180bdc..cec38dda8298 100644
--- linux-libre-6.6-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst
@@ -5,4 +5,4 @@
 :Original: Documentation/arch/loongarch/features.rst
 :Translator: Huacai Chen <chenhuacai@loongson.cn>
 
-.. kernel-feat:: $srctree/Documentation/features loongarch
+.. kernel-feat:: features loongarch
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_CN/arch/mips/features.rst linux-libre-6.6.46-gnu/Documentation/translations/zh_CN/arch/mips/features.rst
index da1b956e4a40..0d6df97db069 100644
--- linux-libre-6.6-gnu/Documentation/translations/zh_CN/arch/mips/features.rst
+++ linux-libre-6.6.46-gnu/Documentation/translations/zh_CN/arch/mips/features.rst
@@ -10,4 +10,4 @@
 
 .. _cn_features:
 
-.. kernel-feat:: $srctree/Documentation/features mips
+.. kernel-feat:: features mips
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_TW/dev-tools/index.rst linux-libre-6.6.46-gnu/Documentation/translations/zh_TW/dev-tools/index.rst
new file mode 100644
index 000000000000..8f101db5a07f
--- /dev/null
+++ linux-libre-6.6.46-gnu/Documentation/translations/zh_TW/dev-tools/index.rst
@@ -0,0 +1,40 @@
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: Documentation/dev-tools/index.rst
+:Translator: Min-Hua Chen <minhuadotchen@gmail.com>
+
+============
+內核開發工具
+============
+
+本文檔是有關內核開發工具文檔的合集。
+目前這些文檔已經整理在一起，不需要再花費額外的精力。
+歡迎任何補丁。
+
+有關測試專用工具的簡要概述，參見
+Documentation/dev-tools/testing-overview.rst
+
+.. class:: toc-title
+
+	   目錄
+
+.. toctree::
+   :maxdepth: 2
+
+   sparse
+
+Todolist:
+
+ - coccinelle
+ - kcov
+ - ubsan
+ - kmemleak
+ - kcsan
+ - kfence
+ - kgdb
+ - kselftest
+ - kunit/index
+ - testing-overview
+ - gcov
+ - kasan
+ - gdb-kernel-debugging
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_TW/sparse.txt linux-libre-6.6.46-gnu/Documentation/translations/zh_TW/dev-tools/sparse.txt
similarity index 100%
rename from Documentation/translations/zh_TW/sparse.txt
rename to Documentation/translations/zh_TW/dev-tools/sparse.txt
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_TW/index.rst linux-libre-6.6.46-gnu/Documentation/translations/zh_TW/index.rst
index d1cf0b4d8e46..ffcaf3272fe7 100644
--- linux-libre-6.6-gnu/Documentation/translations/zh_TW/index.rst
+++ linux-libre-6.6.46-gnu/Documentation/translations/zh_TW/index.rst
@@ -55,11 +55,11 @@ TODOList:
    :maxdepth: 1
 
    process/license-rules
+   dev-tools/index
 
 TODOList:
 
 * doc-guide/index
-* dev-tools/index
 * dev-tools/testing-overview
 * kernel-hacking/index
 * rust/index
diff --git linux-libre-6.6-gnu/Documentation/userspace-api/media/mediactl/media-types.rst linux-libre-6.6.46-gnu/Documentation/userspace-api/media/mediactl/media-types.rst
index 0ffeece1e0c8..6332e8395263 100644
--- linux-libre-6.6-gnu/Documentation/userspace-api/media/mediactl/media-types.rst
+++ linux-libre-6.6.46-gnu/Documentation/userspace-api/media/mediactl/media-types.rst
@@ -375,12 +375,11 @@ Types and flags used to represent the media graph elements
 	  are origins of links.
 
     *  -  ``MEDIA_PAD_FL_MUST_CONNECT``
-       -  If this flag is set and the pad is linked to any other pad, then
-	  at least one of those links must be enabled for the entity to be
-	  able to stream. There could be temporary reasons (e.g. device
-	  configuration dependent) for the pad to need enabled links even
-	  when this flag isn't set; the absence of the flag doesn't imply
-	  there is none.
+       -  If this flag is set, then for this pad to be able to stream, it must
+	  be connected by at least one enabled link. There could be temporary
+	  reasons (e.g. device configuration dependent) for the pad to need
+	  enabled links even when this flag isn't set; the absence of the flag
+	  doesn't imply there is none.
 
 
 One and only one of ``MEDIA_PAD_FL_SINK`` and ``MEDIA_PAD_FL_SOURCE``
diff --git linux-libre-6.6-gnu/MAINTAINERS linux-libre-6.6.46-gnu/MAINTAINERS
index dd5de540ec0b..f09415b2b3c5 100644
--- linux-libre-6.6-gnu/MAINTAINERS
+++ linux-libre-6.6.46-gnu/MAINTAINERS
@@ -8142,7 +8142,7 @@ M:	Geoffrey D. Bennett <g@b4.vu>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
-F:	sound/usb/mixer_scarlett_gen2.c
+F:	sound/usb/mixer_scarlett2.c
 
 FORCEDETH GIGABIT ETHERNET DRIVER
 M:	Rain River <rain.1986.08.12@gmail.com>
@@ -10157,6 +10157,14 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/rc/iguanair.c
 
+IIO BACKEND FRAMEWORK
+M:	Nuno Sa <nuno.sa@analog.com>
+R:	Olivier Moysan <olivier.moysan@foss.st.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	drivers/iio/industrialio-backend.c
+F:	include/linux/iio/backend.h
+
 IIO DIGITAL POTENTIOMETER DAC
 M:	Peter Rosin <peda@axentia.se>
 L:	linux-iio@vger.kernel.org
@@ -17380,7 +17388,7 @@ F:	drivers/video/backlight/pwm_bl.c
 F:	include/dt-bindings/pwm/
 F:	include/linux/pwm.h
 F:	include/linux/pwm_backlight.h
-K:	pwm_(config|apply_state|ops)
+K:	pwm_(config|apply_might_sleep|ops)
 
 PXA GPIO DRIVER
 M:	Robert Jarzmik <robert.jarzmik@free.fr>
@@ -23630,6 +23638,7 @@ F:	include/xen/arm/swiotlb-xen.h
 F:	include/xen/swiotlb-xen.h
 
 XFS FILESYSTEM
+M:	Catherine Hoang <catherine.hoang@oracle.com>
 M:	Chandan Babu R <chandan.babu@oracle.com>
 R:	Darrick J. Wong <djwong@kernel.org>
 L:	linux-xfs@vger.kernel.org
diff --git linux-libre-6.6-gnu/Makefile linux-libre-6.6.46-gnu/Makefile
index bcbff502d718..71ac72d34536 100644
--- linux-libre-6.6-gnu/Makefile
+++ linux-libre-6.6.46-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 6
-SUBLEVEL = 0
+SUBLEVEL = 46
 EXTRAVERSION = -gnu
 NAME = Hurr durr I'ma ninja sloth
 
@@ -951,7 +951,6 @@ endif
 ifdef CONFIG_LTO_CLANG
 ifdef CONFIG_LTO_CLANG_THIN
 CC_FLAGS_LTO	:= -flto=thin -fsplit-lto-unit
-KBUILD_LDFLAGS	+= --thinlto-cache-dir=$(extmod_prefix).thinlto-cache
 else
 CC_FLAGS_LTO	:= -flto
 endif
@@ -1317,6 +1316,14 @@ scripts_unifdef: scripts_basic
 quiet_cmd_install = INSTALL $(INSTALL_PATH)
       cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh
 
+# ---------------------------------------------------------------------------
+# vDSO install
+
+PHONY += vdso_install
+vdso_install: export INSTALL_FILES = $(vdso-install-y)
+vdso_install:
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vdsoinst
+
 # ---------------------------------------------------------------------------
 # Tools
 
@@ -1474,7 +1481,7 @@ endif # CONFIG_MODULES
 # Directories & files removed with 'make clean'
 CLEAN_FILES += vmlinux.symvers modules-only.symvers \
 	       modules.builtin modules.builtin.modinfo modules.nsdeps \
-	       compile_commands.json .thinlto-cache rust/test \
+	       compile_commands.json rust/test \
 	       rust-project.json .vmlinux.objs .vmlinux.export.c
 
 # Directories & files removed with 'make mrproper'
@@ -1560,6 +1567,7 @@ help:
 	@echo  '* vmlinux	  - Build the bare kernel'
 	@echo  '* modules	  - Build all modules'
 	@echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
+	@echo  '  vdso_install    - Install unstripped vdso to INSTALL_MOD_PATH (default: /)'
 	@echo  '  dir/            - Build all files in dir and below'
 	@echo  '  dir/file.[ois]  - Build specified target only'
 	@echo  '  dir/file.ll     - Build the LLVM assembly file'
@@ -1777,7 +1785,7 @@ PHONY += compile_commands.json
 
 clean-dirs := $(KBUILD_EXTMOD)
 clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers $(KBUILD_EXTMOD)/modules.nsdeps \
-	$(KBUILD_EXTMOD)/compile_commands.json $(KBUILD_EXTMOD)/.thinlto-cache
+	$(KBUILD_EXTMOD)/compile_commands.json
 
 PHONY += prepare
 # now expand this into a simple variable to reduce the cost of shell evaluations
diff --git linux-libre-6.6-gnu/arch/Kconfig linux-libre-6.6.46-gnu/arch/Kconfig
index 12d51495caec..09603e0bc2cc 100644
--- linux-libre-6.6-gnu/arch/Kconfig
+++ linux-libre-6.6.46-gnu/arch/Kconfig
@@ -9,6 +9,14 @@
 #
 source "arch/$(SRCARCH)/Kconfig"
 
+config ARCH_CONFIGURES_CPU_MITIGATIONS
+	bool
+
+if !ARCH_CONFIGURES_CPU_MITIGATIONS
+config CPU_MITIGATIONS
+	def_bool y
+endif
+
 menu "General architecture-dependent options"
 
 config ARCH_HAS_SUBPAGE_FAULTS
@@ -681,6 +689,7 @@ config SHADOW_CALL_STACK
 	bool "Shadow Call Stack"
 	depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
 	depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	depends on MMU
 	help
 	  This option enables the compiler's Shadow Call Stack, which
 	  uses a shadow stack to protect function return addresses from
diff --git linux-libre-6.6-gnu/arch/alpha/kernel/rtc.c linux-libre-6.6.46-gnu/arch/alpha/kernel/rtc.c
index fb3025396ac9..cfdf90bc8b3f 100644
--- linux-libre-6.6-gnu/arch/alpha/kernel/rtc.c
+++ linux-libre-6.6.46-gnu/arch/alpha/kernel/rtc.c
@@ -80,7 +80,7 @@ init_rtc_epoch(void)
 static int
 alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	int ret = mc146818_get_time(tm);
+	int ret = mc146818_get_time(tm, 10);
 
 	if (ret < 0) {
 		dev_err_ratelimited(dev, "unable to read current time\n");
diff --git linux-libre-6.6-gnu/arch/alpha/kernel/setup.c linux-libre-6.6.46-gnu/arch/alpha/kernel/setup.c
index c80258ec332f..85a679ce061c 100644
--- linux-libre-6.6-gnu/arch/alpha/kernel/setup.c
+++ linux-libre-6.6.46-gnu/arch/alpha/kernel/setup.c
@@ -131,6 +131,7 @@ static void determine_cpu_caches (unsigned int);
 
 static char __initdata command_line[COMMAND_LINE_SIZE];
 
+#ifdef CONFIG_VGA_CONSOLE
 /*
  * The format of "screen_info" is strange, and due to early
  * i386-setup code. This is just enough to make the console
@@ -147,6 +148,7 @@ struct screen_info screen_info = {
 };
 
 EXPORT_SYMBOL(screen_info);
+#endif
 
 /*
  * The direct map I/O window, if any.  This should be the same
diff --git linux-libre-6.6-gnu/arch/alpha/kernel/sys_sio.c linux-libre-6.6.46-gnu/arch/alpha/kernel/sys_sio.c
index 7c420d8dac53..7de8a5d2d206 100644
--- linux-libre-6.6-gnu/arch/alpha/kernel/sys_sio.c
+++ linux-libre-6.6.46-gnu/arch/alpha/kernel/sys_sio.c
@@ -57,11 +57,13 @@ sio_init_irq(void)
 static inline void __init
 alphabook1_init_arch(void)
 {
+#ifdef CONFIG_VGA_CONSOLE
 	/* The AlphaBook1 has LCD video fixed at 800x600,
 	   37 rows and 100 cols. */
 	screen_info.orig_y = 37;
 	screen_info.orig_video_cols = 100;
 	screen_info.orig_video_lines = 37;
+#endif
 
 	lca_init_arch();
 }
diff --git linux-libre-6.6-gnu/arch/arc/boot/dts/hsdk.dts linux-libre-6.6.46-gnu/arch/arc/boot/dts/hsdk.dts
index 6691f4255077..41b980df862b 100644
--- linux-libre-6.6-gnu/arch/arc/boot/dts/hsdk.dts
+++ linux-libre-6.6.46-gnu/arch/arc/boot/dts/hsdk.dts
@@ -205,7 +205,6 @@
 		};
 
 		gmac: ethernet@8000 {
-			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = <0x8000 0x2000>;
 			interrupts = <10>;
diff --git linux-libre-6.6-gnu/arch/arc/include/asm/cacheflush.h linux-libre-6.6.46-gnu/arch/arc/include/asm/cacheflush.h
index bd5b1a9a0544..6fc74500a9f5 100644
--- linux-libre-6.6-gnu/arch/arc/include/asm/cacheflush.h
+++ linux-libre-6.6.46-gnu/arch/arc/include/asm/cacheflush.h
@@ -40,6 +40,7 @@ void dma_cache_wback(phys_addr_t start, unsigned long sz);
 
 /* TBD: optimize this */
 #define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
 #define flush_cache_dup_mm(mm)			/* called on fork (VIVT only) */
diff --git linux-libre-6.6-gnu/arch/arc/include/asm/jump_label.h linux-libre-6.6.46-gnu/arch/arc/include/asm/jump_label.h
index 9d9618079739..a339223d9e05 100644
--- linux-libre-6.6-gnu/arch/arc/include/asm/jump_label.h
+++ linux-libre-6.6.46-gnu/arch/arc/include/asm/jump_label.h
@@ -31,7 +31,7 @@
 static __always_inline bool arch_static_branch(struct static_key *key,
 					       bool branch)
 {
-	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
 		 "1:							\n"
 		 "nop							\n"
 		 ".pushsection __jump_table, \"aw\"			\n"
@@ -47,7 +47,7 @@ l_yes:
 static __always_inline bool arch_static_branch_jump(struct static_key *key,
 						    bool branch)
 {
-	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
 		 "1:							\n"
 		 "b %l[l_yes]						\n"
 		 ".pushsection __jump_table, \"aw\"			\n"
diff --git linux-libre-6.6-gnu/arch/arc/kernel/setup.c linux-libre-6.6.46-gnu/arch/arc/kernel/setup.c
index 4dcf8589b708..d08a5092c2b4 100644
--- linux-libre-6.6-gnu/arch/arc/kernel/setup.c
+++ linux-libre-6.6.46-gnu/arch/arc/kernel/setup.c
@@ -153,7 +153,7 @@ static int arcv2_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
 {
 	int n = 0;
 #ifdef CONFIG_ISA_ARCV2
-	const char *release, *cpu_nm, *isa_nm = "ARCv2";
+	const char *release = "", *cpu_nm = "HS38", *isa_nm = "ARCv2";
 	int dual_issue = 0, dual_enb = 0, mpy_opt, present;
 	int bpu_full, bpu_cache, bpu_pred, bpu_ret_stk;
 	char mpy_nm[16], lpb_nm[32];
@@ -172,8 +172,6 @@ static int arcv2_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
 	 * releases only update it.
 	 */
 
-	cpu_nm = "HS38";
-
 	if (info->arcver > 0x50 && info->arcver <= 0x53) {
 		release = arc_hs_rel[info->arcver - 0x51].str;
 	} else {
diff --git linux-libre-6.6-gnu/arch/arc/kernel/signal.c linux-libre-6.6.46-gnu/arch/arc/kernel/signal.c
index 0b3bb529d246..8f6f4a542964 100644
--- linux-libre-6.6-gnu/arch/arc/kernel/signal.c
+++ linux-libre-6.6.46-gnu/arch/arc/kernel/signal.c
@@ -62,7 +62,7 @@ struct rt_sigframe {
 	unsigned int sigret_magic;
 };
 
-static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+static int save_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
 {
 	int err = 0;
 #ifndef CONFIG_ISA_ARCOMPACT
@@ -75,12 +75,12 @@ static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
 #else
 	v2abi.r58 = v2abi.r59 = 0;
 #endif
-	err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi));
+	err = __copy_to_user(&mctx->v2abi, (void const *)&v2abi, sizeof(v2abi));
 #endif
 	return err;
 }
 
-static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+static int restore_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
 {
 	int err = 0;
 #ifndef CONFIG_ISA_ARCOMPACT
diff --git linux-libre-6.6-gnu/arch/arm/Kconfig linux-libre-6.6.46-gnu/arch/arm/Kconfig
index 9557808e8937..57c0448d017a 100644
--- linux-libre-6.6-gnu/arch/arm/Kconfig
+++ linux-libre-6.6.46-gnu/arch/arm/Kconfig
@@ -589,8 +589,8 @@ source "arch/arm/mm/Kconfig"
 
 config IWMMXT
 	bool "Enable iWMMXt support"
-	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
-	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
diff --git linux-libre-6.6-gnu/arch/arm/Makefile linux-libre-6.6.46-gnu/arch/arm/Makefile
index 547e5856eaa0..5ba42f69f8ce 100644
--- linux-libre-6.6-gnu/arch/arm/Makefile
+++ linux-libre-6.6.46-gnu/arch/arm/Makefile
@@ -304,11 +304,7 @@ $(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
 $(INSTALL_TARGETS):
 	$(call cmd,install)
 
-PHONY += vdso_install
-vdso_install:
-ifeq ($(CONFIG_VDSO),y)
-	$(Q)$(MAKE) $(build)=arch/arm/vdso $@
-endif
+vdso-install-$(CONFIG_VDSO) += arch/arm/vdso/vdso.so.dbg
 
 # My testing targets (bypasses dependencies)
 bp:;	$(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
@@ -331,7 +327,6 @@ define archhelp
   echo  '                  Install using (your) ~/bin/$(INSTALLKERNEL) or'
   echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
-  echo  '  vdso_install  - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso'
   echo
   echo  '  multi_v7_lpae_defconfig     - multi_v7_defconfig with CONFIG_ARM_LPAE enabled'
 endef
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/allwinner/Makefile linux-libre-6.6.46-gnu/arch/arm/boot/dts/allwinner/Makefile
index eebb5a0c873a..296be33ec934 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/allwinner/Makefile
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/allwinner/Makefile
@@ -259,68 +259,6 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-v3s-licheepi-zero.dtb \
 	sun8i-v3s-licheepi-zero-dock.dtb \
 	sun8i-v40-bananapi-m2-berry.dtb
-dtb-$(CONFIG_MACH_SUN8I) += \
-	sun8i-a23-evb.dtb \
-	sun8i-a23-gt90h-v4.dtb \
-	sun8i-a23-inet86dz.dtb \
-	sun8i-a23-ippo-q8h-v5.dtb \
-	sun8i-a23-ippo-q8h-v1.2.dtb \
-	sun8i-a23-polaroid-mid2407pxe03.dtb \
-	sun8i-a23-polaroid-mid2809pxe04.dtb \
-	sun8i-a23-q8-tablet.dtb \
-	sun8i-a33-et-q8-v1.6.dtb \
-	sun8i-a33-ga10h-v1.1.dtb \
-	sun8i-a33-inet-d978-rev2.dtb \
-	sun8i-a33-ippo-q8h-v1.2.dtb \
-	sun8i-a33-olinuxino.dtb \
-	sun8i-a33-q8-tablet.dtb \
-	sun8i-a33-sinlinx-sina33.dtb \
-	sun8i-a83t-allwinner-h8homlet-v2.dtb \
-	sun8i-a83t-bananapi-m3.dtb \
-	sun8i-a83t-cubietruck-plus.dtb \
-	sun8i-a83t-tbs-a711.dtb \
-	sun8i-h2-plus-bananapi-m2-zero.dtb \
-	sun8i-h2-plus-libretech-all-h3-cc.dtb \
-	sun8i-h2-plus-orangepi-r1.dtb \
-	sun8i-h2-plus-orangepi-zero.dtb \
-	sun8i-h3-bananapi-m2-plus.dtb \
-	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
-	sun8i-h3-beelink-x2.dtb \
-	sun8i-h3-libretech-all-h3-cc.dtb \
-	sun8i-h3-mapleboard-mp130.dtb \
-	sun8i-h3-nanopi-duo2.dtb \
-	sun8i-h3-nanopi-m1.dtb\
-	\
-	sun8i-h3-nanopi-m1-plus.dtb \
-	sun8i-h3-nanopi-neo.dtb \
-	sun8i-h3-nanopi-neo-air.dtb \
-	sun8i-h3-nanopi-r1.dtb \
-	sun8i-h3-orangepi-2.dtb \
-	sun8i-h3-orangepi-lite.dtb \
-	sun8i-h3-orangepi-one.dtb \
-	sun8i-h3-orangepi-pc.dtb \
-	sun8i-h3-orangepi-pc-plus.dtb \
-	sun8i-h3-orangepi-plus.dtb \
-	sun8i-h3-orangepi-plus2e.dtb \
-	sun8i-h3-orangepi-zero-plus2.dtb \
-	sun8i-h3-rervision-dvk.dtb \
-	sun8i-h3-zeropi.dtb \
-	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
-	sun8i-r16-bananapi-m2m.dtb \
-	sun8i-r16-nintendo-nes-classic.dtb \
-	sun8i-r16-nintendo-super-nes-classic.dtb \
-	sun8i-r16-parrot.dtb \
-	sun8i-r40-bananapi-m2-ultra.dtb \
-	sun8i-r40-oka40i-c.dtb \
-	sun8i-s3-elimo-initium.dtb \
-	sun8i-s3-lichee-zero-plus.dtb \
-	sun8i-s3-pinecube.dtb \
-	sun8i-t113s-mangopi-mq-r-t113.dtb \
-	sun8i-t3-cqa3t-bv3.dtb \
-	sun8i-v3-sl631-imx179.dtb \
-	sun8i-v3s-licheepi-zero.dtb \
-	sun8i-v3s-licheepi-zero-dock.dtb \
-	sun8i-v40-bananapi-m2-berry.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/amazon/alpine.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/amazon/alpine.dtsi
index ff68dfb4eb78..90bd12feac01 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/amazon/alpine.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/amazon/alpine.dtsi
@@ -167,7 +167,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <96>;
 			al,msi-num-spis = <64>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/arm/arm-realview-pb1176.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
index efed325af88d..d99bac02232b 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
@@ -451,7 +451,7 @@
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
index e899de681f47..5be0e8fd2633 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -45,8 +45,8 @@
 		num-chipselects = <1>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
index a677c827e758..5a8169bbda87 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -80,8 +80,8 @@
 		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index 3f6010ef2b86..213023bc5aec 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -456,7 +456,7 @@
 	status = "okay";
 
 	tpm: tpm@2e {
-		compatible = "tcg,tpm-tis-i2c";
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
 		reg = <0x2e>;
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 530491ae5eb2..857cb26ed6d7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -466,7 +466,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -482,7 +481,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -498,7 +496,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -515,7 +512,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -532,7 +528,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -549,7 +544,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -566,7 +560,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -583,7 +576,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -600,7 +592,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -617,7 +608,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -634,7 +624,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -651,7 +640,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -668,7 +656,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -685,7 +672,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 04f98d1dbb97..e6f3cf3c721e 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -363,6 +363,7 @@
 				interrupts = <40>;
 				reg = <0x1e780200 0x0100>;
 				clocks = <&syscon ASPEED_CLK_APB>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -594,7 +595,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -610,7 +610,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -626,7 +625,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -643,7 +641,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -660,7 +657,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -677,7 +673,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -694,7 +689,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -711,7 +705,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -728,7 +721,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -745,7 +737,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -762,7 +753,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -779,7 +769,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -796,7 +785,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -813,7 +801,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index c4d1faade8be..29f94696d8b1 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -474,6 +474,7 @@
 				reg = <0x1e780500 0x100>;
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -488,6 +489,7 @@
 				reg = <0x1e780600 0x100>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -902,7 +904,6 @@
 	i2c0: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x80 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -917,7 +918,6 @@
 	i2c1: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x100 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -932,7 +932,6 @@
 	i2c2: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x180 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -947,7 +946,6 @@
 	i2c3: i2c-bus@200 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x200 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -962,7 +960,6 @@
 	i2c4: i2c-bus@280 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x280 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -977,7 +974,6 @@
 	i2c5: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x300 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -992,7 +988,6 @@
 	i2c6: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x380 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1007,7 +1002,6 @@
 	i2c7: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x400 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1022,7 +1016,6 @@
 	i2c8: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x480 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1037,7 +1030,6 @@
 	i2c9: i2c-bus@500 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x500 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1052,7 +1044,6 @@
 	i2c10: i2c-bus@580 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x580 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1067,7 +1058,6 @@
 	i2c11: i2c-bus@600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x600 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1082,7 +1072,6 @@
 	i2c12: i2c-bus@680 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x680 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1097,7 +1086,6 @@
 	i2c13: i2c-bus@700 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x700 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1112,7 +1100,6 @@
 	i2c14: i2c-bus@780 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x780 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1127,7 +1114,6 @@
 	i2c15: i2c-bus@800 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x800 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
index 31590d3186a2..00e5887c926f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -35,8 +35,8 @@
 		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
 		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
index f9f79ed82518..07ca0d993c9f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
@@ -167,6 +167,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&mailbox>;
 			interrupts = <0>;
 		};
@@ -247,6 +248,7 @@
 			gpio-controller;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		i2c1: i2c@1800b000 {
@@ -518,6 +520,7 @@
 			gpio-controller;
 
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 42 1>,
 					<&pinctrl 1 44 3>,
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
index 788a6806191a..75545b10ef2f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
@@ -200,6 +200,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
index 9d20ba3b1ffb..6a4482c93167 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
@@ -180,6 +180,7 @@
 			gpio-controller;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 0 32>;
 		};
@@ -352,6 +353,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
index 1ab8184302db..5a2869a18bd5 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -36,9 +36,7 @@
 	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 };
 
-&leds {
-	/delete-node/ led_act;
-};
+/delete-node/ &led_act;
 
 &pm {
 	/delete-property/ system-power-controller;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
index 42bcbf10957c..9f9084269ef5 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -181,5 +181,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
index e04d2e5ea51a..72e960c888ac 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
@@ -85,5 +85,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
index a399800139d9..750e17482371 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
@@ -88,5 +88,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
index fad3473810a2..2bdbc7d18b0e 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
@@ -122,5 +122,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
index 5b2b7b8b3b12..b226bef3369c 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
@@ -145,6 +145,14 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
index d0a26b643b82..192b8db5a89c 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
@@ -145,5 +145,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
index 9f21d6d6d35b..0198b5f9e4a7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
@@ -81,5 +81,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
index 256107291702..73ff1694a4a0 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
@@ -148,5 +148,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
index 707c561703ed..55fc9f44cbc7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
@@ -227,6 +227,14 @@
 			label = "wan";
 		};
 
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
 		port@8 {
 			label = "cpu";
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
index c914569ddd5e..e6d26987865d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
@@ -144,6 +144,14 @@
 			label = "wan";
 		};
 
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
 		port@8 {
 			label = "cpu";
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
index f050acbea0b2..3124dfd01b94 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
@@ -192,6 +192,14 @@
 			label = "wan";
 		};
 
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
 		port@8 {
 			label = "cpu";
 			phy-mode = "rgmii";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
index e8991d4e248c..e374062eb5b7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
@@ -107,5 +107,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
index afc635c8cdeb..badafa024d24 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
@@ -120,5 +120,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
index 7cfa4607ef31..cf95af9db1e6 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
@@ -107,5 +107,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
index d55e10095eae..992c19e1cfa1 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
@@ -75,5 +75,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
index ccf031c0e276..4d0ba315a204 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
@@ -147,5 +147,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
index e28f7a350117..83c429afc297 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
@@ -158,5 +158,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
index 03ad614e6b72..0bf5106f7012 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
@@ -124,6 +124,14 @@
 				full-duplex;
 			};
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
index 26c12bfb0bdd..25eeacf6a248 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
@@ -185,6 +185,14 @@
 				full-duplex;
 			};
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm953012er.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm953012er.dts
index 4fe3b3653376..d939ec9f4a9e 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm953012er.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/broadcom/bcm953012er.dts
@@ -84,6 +84,14 @@
 			label = "cpu";
 			ethernet = <&gmac0>;
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
index 4d70f6afd13a..6d5e69035f94 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -60,6 +60,8 @@
 			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
 			 * each handling all IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
index 9ec0169bacf8..5f4c849915db 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -89,6 +89,8 @@
 			 * The slots have Ethernet, Ethernet, NEC and MPCI.
 			 * The IDSELs are 11, 12, 13, 14.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 11 - Ethernet A */
 			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/marvell/kirkwood-l-50.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
index dffb9f84e67c..c841eb8e7fb1 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -65,6 +65,7 @@
 			gpio2: gpio-expander@20 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x20>;
 
@@ -79,6 +80,7 @@
 			gpio3: gpio-expander@21 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x21>;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/marvell/mmp2-brownstone.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
index 04f1ae1382e7..bc64348b8218 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
@@ -28,7 +28,7 @@
 &twsi1 {
 	status = "okay";
 	pmic: max8925@3c {
-		compatible = "maxium,max8925";
+		compatible = "maxim,max8925";
 		reg = <0x3c>;
 		interrupts = <1>;
 		interrupt-parent = <&intcmux4>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
index 217e9b96c61e..20b2497657ae 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
@@ -293,7 +293,7 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1150000>;
+						regulator-suspend-microvolt = <1150000>;
 						regulator-mode = <4>;
 					};
 
@@ -314,7 +314,7 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1050000>;
+						regulator-suspend-microvolt = <1050000>;
 						regulator-mode = <4>;
 					};
 
@@ -331,7 +331,7 @@
 					regulator-always-on;
 
 					regulator-state-standby {
-						regulator-suspend-voltage = <1800000>;
+						regulator-suspend-microvolt = <1800000>;
 						regulator-on-in-suspend;
 					};
 
@@ -346,7 +346,7 @@
 					regulator-max-microvolt = <3700000>;
 
 					regulator-state-standby {
-						regulator-suspend-voltage = <1800000>;
+						regulator-suspend-microvolt = <1800000>;
 						regulator-on-in-suspend;
 					};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
index fd671c7a1e5d..6e1f0f164cb4 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -120,6 +120,7 @@
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
 					     <3 IRQ_TYPE_LEVEL_HIGH>,
 					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
@@ -128,6 +129,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
index 1640763fd4af..ff0d684622f7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
@@ -997,7 +997,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
index 3b6fad273cab..d38f1dd38a90 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
@@ -980,7 +980,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
index 4eb526fe9c55..81c8a5fd92cc 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
@@ -861,7 +861,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx1-ads.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
index 5833fb6f15d8..2c817c4a4c68 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
@@ -65,7 +65,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <4>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
index 1f11e9542a72..e66eef87a7a4 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
@@ -45,7 +45,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx1.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx1.dtsi
index e312f1e74e2f..4aeb74479f44 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx1.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx1.dtsi
@@ -268,9 +268,12 @@
 			status = "disabled";
 		};
 
-		esram: esram@300000 {
+		esram: sram@300000 {
 			compatible = "mmio-sram";
 			reg = <0x00300000 0x20000>;
+			ranges = <0 0x00300000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
index 0703f62d10d1..93a6e4e680b4 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
@@ -27,7 +27,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
index fc8a502fc957..6cddb2cc36fe 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&qvga_timings>;
-			qvga_timings: 320x240 {
+			qvga_timings: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index 80a7f96de4c6..64b2ffac463b 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_svga_timings>;
-			dvi_svga_timings: 800x600 {
+			dvi_svga_timings: timing0 {
 				clock-frequency = <40000000>;
 				hactive = <800>;
 				vactive = <600>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index 24027a1fb46d..fb074bfdaa8d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_vga_timings>;
-			dvi_vga_timings: 640x480 {
+			dvi_vga_timings: timing0 {
 				clock-frequency = <31250000>;
 				hactive = <640>;
 				vactive = <480>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
index 04f4b127a172..e93bf3b7115f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
@@ -68,7 +68,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&wvga_timings>;
-			wvga_timings: 640x480 {
+			wvga_timings: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <45>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi
index d7618c7e20e9..56b3bcf77788 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi
@@ -543,7 +543,7 @@
 			};
 
 			iim: efuse@53ff0000 {
-				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx25-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
 				clocks = <&clks 99>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
index a21f1f7c24b8..849306cb4532 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
@@ -16,7 +16,7 @@
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 800x480 {
+			timing0: timing0 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
 				vactive = <480>;
@@ -47,7 +47,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
index 74110bbcd9d4..c7e923584878 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
@@ -33,7 +33,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -90,7 +90,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
index 145e459625b3..d78793601306 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -16,7 +16,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
index 25442eba21c1..27c93b9fe049 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
@@ -19,7 +19,7 @@
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 640x480 {
+			timing0: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <112>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
index 7f0cd4d3ec2d..67b235044b70 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -19,7 +19,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 240x320 {
+			timing0: timing0 {
 				clock-frequency = <5500000>;
 				hactive = <240>;
 				vactive = <320>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
index 7191e10712b9..efce284b5796 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -314,7 +314,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27.dtsi
index faba12ee7465..cac4b3d68986 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx27.dtsi
@@ -588,6 +588,9 @@
 		iram: sram@ffff4c00 {
 			compatible = "mmio-sram";
 			reg = <0xffff4c00 0xb400>;
+			ranges = <0 0xffff4c00 0xb400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
index 3be38a3c4bb1..c32ea040fecd 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -117,17 +117,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
@@ -149,15 +141,30 @@
 				eth2: port@2 {
 					reg = <2>;
 					label = "eth2";
+					phy-mode = "internal";
 					phy-handle = <&phy_port2>;
 				};
 
 				eth1: port@3 {
 					reg = <3>;
 					label = "eth1";
+					phy-mode = "internal";
 					phy-handle = <&phy_port3>;
 				};
 			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port2: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy_port3: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
 		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
index 717decda0ceb..3ac7a4501620 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
@@ -76,6 +76,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can1_power>;
 		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_can2_supply: regulator-can2-supply {
@@ -85,6 +86,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can2_power>;
 		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
index db8c332df6a1..cad112e05475 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
@@ -227,7 +227,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 
 		bridge@2,1 {
 			compatible = "pci10b5,8605";
@@ -235,7 +234,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			ethernet@3,0 {
@@ -250,7 +248,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			switch_nic: ethernet@4,0 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
index 99f4f6ac71d4..c1ae7c47b442 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
@@ -245,6 +245,7 @@
 				reg = <0x74>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupt-parent = <&gpio2>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -390,7 +391,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi
index 4d6a0c3e8455..ff062f4fd726 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi
@@ -5,31 +5,8 @@
 
 #include "imx6q.dtsi"
 #include "imx6qdl-kontron-samx6i.dtsi"
-#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Kontron SMARC sAMX6i Quad/Dual";
 	compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
 };
-
-/* Quad/Dual SoMs have 3 chip-select signals */
-&ecspi4 {
-	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>,
-		   <&gpio3 25 GPIO_ACTIVE_LOW>;
-};
-
-&pinctrl_ecspi4 {
-	fsl,pins = <
-		MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-		MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-		MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-
-		/* SPI4_IMX_CS2# - connected to internal flash */
-		MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
-		/* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
-		MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
-		/* SPI4_CS3# - connected to  SMARC SPI0_CS1# */
-		MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
-	>;
-};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts
index a3f247c722b4..0342a79ccd5d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts
@@ -37,9 +37,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
 };
 
 &hdmi {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index 4cc965277c52..dcb4f6a32f80 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -619,7 +619,6 @@
 		blocks = <0x5>;
 		id = <0>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 		interrupt-parent = <&gpio4>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
index 11d9c7a2dacb..6cc4d6fd5f28 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -543,7 +543,6 @@
 		blocks = <0x5>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio6>;
-		interrupt-controller;
 		id = <0>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index a63e73adc1fc..42b2ba23aefc 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -225,7 +225,6 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi
index 85aeebc9485d..668d33d1ff0c 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi
@@ -244,7 +244,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>;
+		   <&gpio3 29 GPIO_ACTIVE_LOW>,
+		   <&gpio3 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	/* default boot source: workaround #1 for errata ERR006282 */
@@ -259,7 +260,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-connection-type = "rgmii-id";
 	phy-handle = <&ethphy>;
 
 	mdio {
@@ -269,7 +270,7 @@
 		ethphy: ethernet-phy@1 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <1>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <1000>;
 		};
 	};
@@ -464,6 +465,8 @@
 			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
 			/* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */
 			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+			/* SPI4_CS3# - connected to SMARC SPI0_CS1# */
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
 		>;
 	};
 
@@ -516,7 +519,7 @@
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b0b0 /* RST_GBE0_PHY# */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x1b0b0 /* RST_GBE0_PHY# */
 		>;
 	};
 
@@ -729,7 +732,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
 	wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>;
-	reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio3 13 GPIO_ACTIVE_LOW>;
 };
 
 /* LCD_BKLT_PWM */
@@ -817,5 +820,6 @@
 	/* CPLD is feeded by watchdog (hardwired) */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
 	status = "okay";
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
index 113974520d54..c0c47adc5866 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
@@ -124,6 +124,7 @@
 		reg = <0x58>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+		#interrupt-cells = <2>;
 		interrupt-controller;
 
 		regulators {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
index 86b4269e0e01..85e278eb2016 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
@@ -100,6 +100,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
index 4ffe99ed55ca..07dcecbe485d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
@@ -121,6 +121,8 @@
 			max-speed = <100>;
 			interrupt-parent = <&gpio5>;
 			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
index ea627638e40c..7dd1fe5a2fb7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
@@ -121,7 +121,7 @@
 	tpm_tis: tpm@1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tpm>;
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <1>;
 		spi-max-frequency = <20000000>;
 		interrupt-parent = <&gpio5>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
index 3fdece5bd31f..5248a058230c 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
@@ -805,6 +805,7 @@
 		     &pinctrl_usb_pwr>;
 	dr_mode = "host";
 	power-active-high;
+	over-current-active-low;
 	disable-over-current;
 	status = "okay";
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
index 3a723843d562..9984b343cdf0 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
@@ -130,7 +130,7 @@
 	 * TCG specification - Section 6.4.1 Clocking:
 	 * TPM shall support a SPI clock frequency range of 10-24 MHz.
 	 */
-	st33htph: tpm-tis@0 {
+	st33htph: tpm@0 {
 		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <24000000>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
index 12361fcbe24a..1b965652291b 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
@@ -63,6 +63,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
+		interrupt-controller;
 		reg = <0x25>;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
index 4b94b8afb55d..0484e349e064 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
@@ -217,9 +217,6 @@
 };
 
 &ca_funnel_in_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
 	port@1 {
 		reg = <1>;
 		ca_funnel_in_port1: endpoint {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
index ba7231b364bb..7bab113ca6da 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
@@ -210,6 +210,7 @@
 				remote-endpoint = <&mipi_from_sensor>;
 				clock-lanes = <0>;
 				data-lanes = <1>;
+				link-frequencies = /bits/ 64 <330000000>;
 			};
 		};
 	};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
index ef7066f536df..5d43293f618d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -190,7 +190,11 @@
 			clock-names = "apb_pclk";
 
 			ca_funnel_in_ports: in-ports {
-				port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
 					ca_funnel_in_port0: endpoint {
 						remote-endpoint = <&etm0_out_port>;
 					};
@@ -454,7 +458,7 @@
 			};
 
 			gpt1: timer@302d0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302d0000 0x10000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
@@ -463,7 +467,7 @@
 			};
 
 			gpt2: timer@302e0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302e0000 0x10000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
@@ -473,7 +477,7 @@
 			};
 
 			gpt3: timer@302f0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302f0000 0x10000>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
@@ -483,7 +487,7 @@
 			};
 
 			gpt4: timer@30300000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x30300000 0x10000>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
@@ -814,7 +818,7 @@
 			};
 
 			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x30730000 0x10000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
@@ -1278,7 +1282,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
index 46057d9bf555..c2efcc20ae80 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
@@ -175,10 +175,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio1 24 0		/* SDA */
-			&gpio1 22 0		/* SCL */
-		>;
+		sda-gpios = <&gpio1 24 0>;
+		scl-gpios = <&gpio1 22 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 
@@ -186,10 +184,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio0 31 0		/* SDA */
-			&gpio0 30 0		/* SCL */
-		>;
+		sda-gpios = <&gpio0 31 0>;
+		scl-gpios = <&gpio0 30 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 
 		touch: touch@20 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx23.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
index 5eca942a52fd..14c07b585f82 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
@@ -412,7 +412,7 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <7>, <5>, <9>, <26>,
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts
index a400c108f66a..6c5e6856648a 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts
@@ -8,6 +8,7 @@
 #include "imx28-lwe.dtsi"
 
 / {
+	model = "Liebherr XEA board";
 	compatible = "lwn,imx28-xea", "fsl,imx28";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx28.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index 763adeb995ee..9b73130887ea 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -990,7 +990,7 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <78>, <79>, <66>, <0>,
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
index 16b4e06c4efa..a248b8a45342 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -338,6 +338,7 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/pm8226.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pm8226.dtsi
rename to arch/arm/boot/dts/qcom/pm8226.dtsi
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-pm8841.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/pm8841.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pm8841.dtsi
rename to arch/arm/boot/dts/qcom/pm8841.dtsi
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/pm8941.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pm8941.dtsi
rename to arch/arm/boot/dts/qcom/pm8941.dtsi
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-pma8084.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/pma8084.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pma8084.dtsi
rename to arch/arm/boot/dts/qcom/pma8084.dtsi
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-pmx55.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/pmx55.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pmx55.dtsi
rename to arch/arm/boot/dts/qcom/pmx55.dtsi
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-pmx65.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/pmx65.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pmx65.dtsi
rename to arch/arm/boot/dts/qcom/pmx65.dtsi
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
index aa0e0e8d2a97..a39f5a161b03 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
index de19640efe55..59b218042d32 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 #include <dt-bindings/input/ti-drv260x.h>
 
 /delete-node/ &adsp_region;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
index b887e5361ec3..feb78afef3a6 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
index 884d99297d4c..cffc069712b2 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -7,7 +7,7 @@
 
 #include <dt-bindings/input/input.h>
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 /delete-node/ &smem_region;
@@ -45,11 +45,11 @@
 
 		event-hall-sensor {
 			label = "Hall Effect Sensor";
-			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
-			interrupts = <&tlmm 110 IRQ_TYPE_EDGE_FALLING>;
+			gpios = <&tlmm 110 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_LID>;
 			debounce-interval = <15>;
+			linux,can-disable;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index db4c791b2e2f..48fd1a1feea3 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -72,7 +72,7 @@
 		/* Trig on both edges - getting close or far away */
 		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
 		/* MPP05 analog input to the XOADC */
-		io-channels = <&xoadc 0x00 0x05>;
+		io-channels = <&pm8058_xoadc 0x00 0x05>;
 		io-channel-names = "aout";
 		pinctrl-names = "default";
 		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
@@ -945,7 +945,7 @@
 	};
 };
 
-&xoadc {
+&pm8058_xoadc {
 	/* Reference voltage 2.2 V */
 	xoadc-ref-supply = <&pm8058_l18>;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 516f0d2495e2..950adb63af70 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -738,7 +738,7 @@
 
 				xoadc: xoadc@197 {
 					compatible = "qcom,pm8921-adc";
-					reg = <197>;
+					reg = <0x197>;
 					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
 					#address-cells = <2>;
 					#size-cells = <0>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
index 6788ddb9cbc8..d7e508776f6a 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
@@ -4,8 +4,8 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 
 /delete-node/ &mpss_region;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
index 116e59a3b76d..1df24c922be9 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ8084/IFC6540";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
index c6b6680248a6..d4e6aee034af 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ 8084-MTP";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index 92c8003dac25..dac3aa793f71 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -76,7 +76,7 @@
 	};
 };
 
-&pmicgpio {
+&pm8018_gpio {
 	usb_vbus_5v_pins: usb-vbus-5v-state {
 		pins = "gpio4";
 		function = "normal";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index fc4f52f9e9f7..c0a60bae703b 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -47,14 +47,12 @@
 		};
 	};
 
-	regulators {
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
 	};
 
 	soc: soc {
@@ -263,7 +261,7 @@
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic {
+			pm8018: pmic {
 				compatible = "qcom,pm8018", "qcom,pm8921";
 				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <2>;
@@ -274,38 +272,38 @@
 				pwrkey@1c {
 					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
 					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
+					interrupt-parent = <&pm8018>;
 					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
 						     <51 IRQ_TYPE_EDGE_RISING>;
 					debounce = <15625>;
 					pull-up;
 				};
 
-				pmicmpp: mpps@50 {
+				pm8018_mpps: mpps@50 {
 					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
 					interrupt-controller;
 					#interrupt-cells = <2>;
 					reg = <0x50>;
 					gpio-controller;
 					#gpio-cells = <2>;
-					gpio-ranges = <&pmicmpp 0 0 6>;
+					gpio-ranges = <&pm8018_mpps 0 0 6>;
 				};
 
 				rtc@11d {
 					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
+					interrupt-parent = <&pm8018>;
 					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
 					reg = <0x11d>;
 					allow-set-time;
 				};
 
-				pmicgpio: gpio@150 {
+				pm8018_gpio: gpio@150 {
 					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
 					reg = <0x150>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
 					gpio-controller;
-					gpio-ranges = <&pmicgpio 0 0 6>;
+					gpio-ranges = <&pm8018_gpio 0 0 6>;
 					#gpio-cells = <2>;
 				};
 			};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 44f3f0127fd7..78738371f634 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -404,8 +404,8 @@
 				 <&gcc GPLL0_VOTE>,
 				 <&gcc GPLL1_VOTE>,
 				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <0>,
-				 <0>;
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>;
 			clock-names = "xo",
 				      "mmss_gpll0_vote",
 				      "gpll0_vote",
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 78023ed2fdf7..9217ced108c4 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -80,13 +80,13 @@
 	 */
 	iio-hwmon {
 		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+		io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
 	};
 
 	soc: soc {
@@ -390,7 +390,7 @@
 					row-hold = <91500>;
 				};
 
-				xoadc: xoadc@197 {
+				pm8058_xoadc: xoadc@197 {
 					compatible = "qcom,pm8058-adc";
 					reg = <0x197>;
 					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 60bdfddeae69..da99f770d4f5 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
index 68a2f9094e53..23ae474698aa 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index 706fef53767e..4a8eb8b42329 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -1194,7 +1194,7 @@
 
 		qfprom: qfprom@fc4bc000 {
 			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
+			reg = <0xfc4bc000 0x2100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
index 42d253b75dad..6c4153689b39 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
index 8230d0e1d95d..c0ca264d8140 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
index 3e2c86591ee2..325feb89b343 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/leds/common.h>
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 11468d1409f7..0798cce3dbea 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
index 7e97ad5803d8..247069361909 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
@@ -9,7 +9,7 @@
 #include "qcom-sdx55.dtsi"
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pm8150b.dtsi>
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX55 MTP";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
index 51058b065279..082f7ed1a01f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Thundercomm T55 Development Kit";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
index 8fadc6e70692..e336a15b45c4 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Telit FN980 TLB";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 55ce87b75253..f9ad5abfbd28 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -345,10 +345,10 @@
 					  "msi8";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
 				 <&gcc GCC_PCIE_AUX_CLK>,
@@ -592,10 +592,10 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -619,7 +619,7 @@
 			compatible = "qcom,sdx55-pdc", "qcom,pdc";
 			reg = <0x0b210000 0x30000>;
 			qcom,pdc-ranges = <0 179 52>;
-			#interrupt-cells = <3>;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
 			interrupt-controller;
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
index fcf1c51c5e7a..b87c5434cc29 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pmk8350.dtsi>
 #include <arm64/qcom/pm7250b.dtsi>
-#include "qcom-pmx65.dtsi"
+#include "pmx65.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX65 MTP";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index 1a3583029a64..271899c861c0 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -338,7 +338,7 @@
 			power-domains = <&gcc PCIE_GDSC>;
 
 			phys = <&pcie_phy>;
-			phy-names = "pcie-phy";
+			phy-names = "pciephy";
 
 			max-link-speed = <3>;
 			num-lanes = <2>;
@@ -530,7 +530,7 @@
 			reg = <0x0c264000 0x1000>;
 		};
 
-		spmi_bus: qcom,spmi@c440000 {
+		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0xd00>,
 				<0xc600000 0x2000000>,
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
index e81a7213d304..4282bafbb504 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
@@ -209,6 +209,18 @@
 	status = "okay";
 };
 
+&extal1_clk {
+	clock-frequency = <26000000>;
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
 &pfc {
 	scifa0_pins: scifa0 {
 		groups = "scifa0_data";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a73a4.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a73a4.dtsi
index c39066967053..d1f4cbd099ef 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a73a4.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a73a4.dtsi
@@ -450,17 +450,20 @@
 		extalr_clk: extalr {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal1_clk: extal1 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <25000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <48000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7790-lager.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7790-lager.dts
index 5ad5349a50dc..ab7e9fa90b9f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7790-lager.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7790-lager.dts
@@ -437,6 +437,7 @@
 			interrupt-parent = <&irqc0>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 
 			rtc {
 				compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7790-stout.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7790-stout.dts
index fe14727eefe1..25956661a875 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7790-stout.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7790-stout.dts
@@ -332,6 +332,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
index 26a40782cc89..4a76be68887b 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
@@ -800,6 +800,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts
index ec0a20d5130d..fcc9a2313e1d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts
@@ -389,6 +389,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		watchdog {
 			compatible = "dlg,da9063-watchdog";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7792-blanche.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
index c66de9dd12df..20963c9bbf0a 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
@@ -239,7 +239,7 @@
 	};
 
 	keyboard_pins: keyboard {
-		pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_02";
+		pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2";
 		bias-pull-up;
 	};
 
@@ -330,6 +330,7 @@
 		interrupt-parent = <&irqc>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts
index 79b537b24642..9358fc7d0e9f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts
@@ -735,6 +735,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7794-alt.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7794-alt.dts
index 4d93319674c6..3a9db455ddec 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7794-alt.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7794-alt.dts
@@ -458,6 +458,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7794-silk.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7794-silk.dts
index b7af1befa126..b825f2e25dd0 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7794-silk.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/renesas/r8a7794-silk.dts
@@ -424,6 +424,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi
index 78686fc72ce6..c420c7c642cb 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -402,12 +402,20 @@
 		pinctrl-0 = <&hdmi_ctl>;
 		status = "disabled";
 
-		hdmi_in: port {
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			hdmi_in_vop: endpoint@0 {
+
+			hdmi_in: port@0 {
 				reg = <0>;
-				remote-endpoint = <&vop_out_hdmi>;
+
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
 			};
 		};
 	};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3066a.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/rockchip/rk3066a.dtsi
index de9915d946f7..b98d5e357baf 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3066a.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/rockchip/rk3066a.dtsi
@@ -123,6 +123,7 @@
 		pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
 		power-domains = <&power RK3066_PD_VIO>;
 		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi
index 88a4b0d6d928..80d81af5fe0e 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -795,7 +795,7 @@
 			};
 
 			sdmmc_pwren: sdmmc-pwren {
-				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_default>;
+				rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_default>;
 			};
 
 			sdmmc_bus4: sdmmc-bus4 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi
index ffc16d6b97e1..03d9baddcbab 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi
@@ -732,14 +732,20 @@
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				hdmi_in_vop: endpoint@0 {
-					reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+
+				hdmi_in_vop: endpoint {
 					remote-endpoint = <&vop_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi
index cb9cdaddffd4..8593a8359937 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi
@@ -1231,27 +1231,37 @@
 		compatible = "rockchip,rk3288-dw-hdmi";
 		reg = <0x0 0xff980000 0x0 0x20000>;
 		reg-io-width = <4>;
-		#sound-dai-cells = <0>;
-		rockchip,grf = <&grf>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
 		clock-names = "iahb", "isfr", "cec";
 		power-domains = <&power RK3288_PD_VIO>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				hdmi_in_vopb: endpoint@0 {
 					reg = <0>;
 					remote-endpoint = <&vopb_out_hdmi>;
 				};
+
 				hdmi_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi
index abf3006f0a84..f3291f3bbc6f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi
@@ -196,7 +196,6 @@
 	pwm4: pwm@10280000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280000 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -208,7 +207,6 @@
 	pwm5: pwm@10280010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280010 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -220,7 +218,6 @@
 	pwm6: pwm@10280020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280020 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -232,7 +229,6 @@
 	pwm7: pwm@10280030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280030 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -386,7 +382,6 @@
 	pwm0: pwm@20040000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040000 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -398,7 +393,6 @@
 	pwm1: pwm@20040010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040010 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -410,7 +404,6 @@
 	pwm2: pwm@20040020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040020 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -422,7 +415,6 @@
 	pwm3: pwm@20040030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040030 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4.dtsi
index f775b9377a38..7f981b5c0d64 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4.dtsi
@@ -203,16 +203,16 @@
 
 		camera: camera@11800000 {
 			compatible = "samsung,fimc";
+			ranges = <0x0 0x11800000 0xa0000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			fimc_0: fimc@11800000 {
+			fimc_0: fimc@0 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11800000 0x1000>;
+				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC0>,
 					 <&clock CLK_SCLK_FIMC0>;
@@ -223,9 +223,9 @@
 				status = "disabled";
 			};
 
-			fimc_1: fimc@11810000 {
+			fimc_1: fimc@10000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11810000 0x1000>;
+				reg = <0x00010000 0x1000>;
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC1>,
 					 <&clock CLK_SCLK_FIMC1>;
@@ -236,9 +236,9 @@
 				status = "disabled";
 			};
 
-			fimc_2: fimc@11820000 {
+			fimc_2: fimc@20000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11820000 0x1000>;
+				reg = <0x00020000 0x1000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC2>,
 					 <&clock CLK_SCLK_FIMC2>;
@@ -249,9 +249,9 @@
 				status = "disabled";
 			};
 
-			fimc_3: fimc@11830000 {
+			fimc_3: fimc@30000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11830000 0x1000>;
+				reg = <0x00030000 0x1000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC3>,
 					 <&clock CLK_SCLK_FIMC3>;
@@ -262,9 +262,9 @@
 				status = "disabled";
 			};
 
-			csis_0: csis@11880000 {
+			csis_0: csis@80000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11880000 0x4000>;
+				reg = <0x00080000 0x4000>;
 				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS0>,
 					 <&clock CLK_SCLK_CSIS0>;
@@ -278,9 +278,9 @@
 				#size-cells = <0>;
 			};
 
-			csis_1: csis@11890000 {
+			csis_1: csis@90000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11890000 0x4000>;
+				reg = <0x00090000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS1>,
 					 <&clock CLK_SCLK_CSIS1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
index a9ec1f6c1dea..a076a1dfe41f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
@@ -527,6 +527,14 @@
 				regulator-name = "VT_CAM_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+
+				/*
+				 * Force-enable this regulator; otherwise the
+				 * kernel hangs very early in the boot process
+				 * for about 12 seconds, without apparent
+				 * reason.
+				 */
+				regulator-always-on;
 			};
 
 			vcclcd_reg: LDO13 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts
index b566f878ed84..18f4f494093b 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts
@@ -88,7 +88,7 @@
 &keypad {
 	samsung,keypad-num-rows = <2>;
 	samsung,keypad-num-columns = <8>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-names = "default";
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
index ce81e42bf5eb..39469b708f91 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
@@ -435,6 +435,7 @@
 };
 
 &fimd {
+	samsung,invert-vclk;
 	status = "okay";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4412-origen.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4412-origen.dts
index 23b151645d66..10ab7bc90f50 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4412-origen.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4412-origen.dts
@@ -453,7 +453,7 @@
 &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <2>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts
index 715dfcba1417..e16df9e75fcb 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts
@@ -69,7 +69,7 @@
 &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <8>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4x12.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4x12.dtsi
index 84c1db221c98..83d9d0a0a617 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4x12.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/exynos4x12.dtsi
@@ -451,14 +451,15 @@
 };
 
 &camera {
+	ranges = <0x0 0x11800000 0xba1000>;
 	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
 		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
 	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
 
 	/* fimc_[0-3] are configured outside, under phandles */
-	fimc_lite_0: fimc-lite@12390000 {
+	fimc_lite_0: fimc-lite@b90000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x12390000 0x1000>;
+		reg = <0x00b90000 0x1000>;
 		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
@@ -467,9 +468,9 @@
 		status = "disabled";
 	};
 
-	fimc_lite_1: fimc-lite@123a0000 {
+	fimc_lite_1: fimc-lite@ba0000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123a0000 0x1000>;
+		reg = <0x00ba0000 0x1000>;
 		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
@@ -478,9 +479,9 @@
 		status = "disabled";
 	};
 
-	fimc_is: fimc-is@12000000 {
+	fimc_is: fimc-is@800000 {
 		compatible = "samsung,exynos4212-fimc-is";
-		reg = <0x12000000 0x260000>;
+		reg = <0x00800000 0x260000>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
@@ -525,9 +526,9 @@
 			reg = <0x10020000 0x3000>;
 		};
 
-		i2c1_isp: i2c-isp@12140000 {
+		i2c1_isp: i2c-isp@940000 {
 			compatible = "samsung,exynos4212-i2c-isp";
-			reg = <0x12140000 0x100>;
+			reg = <0x00940000 0x100>;
 			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
 			clock-names = "i2c_isp";
 			#address-cells = <1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/s5pv210.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/s5pv210.dtsi
index f7de5b5f2f38..ed560c9a3aa1 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/s5pv210.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/samsung/s5pv210.dtsi
@@ -549,17 +549,17 @@
 
 		camera: camera@fa600000 {
 			compatible = "samsung,fimc";
+			ranges = <0x0 0xfa600000 0xe01000>;
 			clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
 			clock-names = "sclk_cam0", "sclk_cam1";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			csis0: csis@fa600000 {
+			csis0: csis@0 {
 				compatible = "samsung,s5pv210-csis";
-				reg = <0xfa600000 0x4000>;
+				reg = <0x00000000 0x4000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
@@ -572,9 +572,9 @@
 				#size-cells = <0>;
 			};
 
-			fimc0: fimc@fb200000 {
+			fimc0: fimc@c00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb200000 0x1000>;
+				reg = <0x00c00000 0x1000>;
 				interrupts = <5>;
 				interrupt-parent = <&vic2>;
 				clocks = <&clocks CLK_FIMC0>,
@@ -586,9 +586,9 @@
 				samsung,cam-if;
 			};
 
-			fimc1: fimc@fb300000 {
+			fimc1: fimc@d00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb300000 0x1000>;
+				reg = <0x00d00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <6>;
 				clocks = <&clocks CLK_FIMC1>,
@@ -602,9 +602,9 @@
 				samsung,lcd-wb;
 			};
 
-			fimc2: fimc@fb400000 {
+			fimc2: fimc@e00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb400000 0x1000>;
+				reg = <0x00e00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <7>;
 				clocks = <&clocks CLK_FIMC2>,
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32429i-eval.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32429i-eval.dts
index 576235ec3c51..afa417b34b25 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32429i-eval.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32429i-eval.dts
@@ -222,7 +222,6 @@
 		reg = <0x42>;
 		interrupts = <8 3>;
 		interrupt-parent = <&gpioi>;
-		interrupt-controller;
 		wakeup-source;
 
 		stmpegpio: stmpe_gpio {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi
index 65480a9f5cc4..842f2b17c4a8 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi
@@ -376,7 +376,6 @@
 				};
 			};
 
-
 			ltdc_pins_a: ltdc-0 {
 				pins {
 					pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
index 61508917521c..aec7fa5ab5d8 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -50,6 +50,7 @@
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-parent = <&intc>;
+		arm,no-tick-in-suspend;
 	};
 
 	clocks {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
index afcd6285890c..c27963898b5e 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
-	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157";
+	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
index 39358d902000..622618943134 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
-	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
+	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
index 510cca5acb79..7a701f7ef0c7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
@@ -64,7 +64,6 @@
 		reg = <0x38>;
 		interrupts = <2 2>;
 		interrupt-parent = <&gpiof>;
-		interrupt-controller;
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <800>;
 		status = "okay";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
index 07ea765a4553..c7c4d7e89d61 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
-	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
+	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
index 813086ec2489..2ab77e64f1bb 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
@@ -11,8 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
-	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1",
-		     "st,stm32mp157";
+	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
index b8730aa52ce6..a59331aa58e5 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
@@ -217,7 +217,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_pins>;
 
-	tpm_spi_tis@0 {
+	tpm@0 {
 		compatible = "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <500000>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am33xx.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/ti/omap/am33xx.dtsi
index 1a2cd5baf402..5b9e01a8aa5d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am33xx.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/ti/omap/am33xx.dtsi
@@ -359,6 +359,7 @@
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-delay-us = <2>;
 			clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am3517-evm.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/ti/omap/am3517-evm.dts
index af9df15274be..866f68c5b504 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am3517-evm.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/ti/omap/am3517-evm.dts
@@ -271,13 +271,6 @@
 		>;
 	};
 
-	leds_pins: leds-pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 */
-			OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu1.gpio_31 */
-		>;
-	};
-
 	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
@@ -355,3 +348,12 @@
 		>;
 	};
 };
+
+&omap3_pmx_wkup {
+	leds_pins: leds-pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 */
+			OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu1.gpio_31 */
+		>;
+	};
+};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts linux-libre-6.6.46-gnu/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
index 9a234dc1431d..5b240769d300 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
@@ -415,7 +415,6 @@
 		reg = <0x41>;
 		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
-		interrupt-controller;
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/dra7.dtsi linux-libre-6.6.46-gnu/arch/arm/boot/dts/ti/omap/dra7.dtsi
index 3f3e52e3b375..6509c742fb58 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/dra7.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm/boot/dts/ti/omap/dra7.dtsi
@@ -147,7 +147,7 @@
 
 		l3-noc@44000000 {
 			compatible = "ti,dra7-l3-noc";
-			reg = <0x44000000 0x1000>,
+			reg = <0x44000000 0x1000000>,
 			      <0x45000000 0x1000>;
 			interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
 					      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.6-gnu/arch/arm/configs/imx_v6_v7_defconfig linux-libre-6.6.46-gnu/arch/arm/configs/imx_v6_v7_defconfig
index 0a90583f9f01..8f9dbe8d9029 100644
--- linux-libre-6.6-gnu/arch/arm/configs/imx_v6_v7_defconfig
+++ linux-libre-6.6.46-gnu/arch/arm/configs/imx_v6_v7_defconfig
@@ -297,6 +297,7 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
 CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_GPIO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
diff --git linux-libre-6.6-gnu/arch/arm/configs/sunxi_defconfig linux-libre-6.6.46-gnu/arch/arm/configs/sunxi_defconfig
index bddc82f78942..a83d29fed175 100644
--- linux-libre-6.6-gnu/arch/arm/configs/sunxi_defconfig
+++ linux-libre-6.6.46-gnu/arch/arm/configs/sunxi_defconfig
@@ -110,6 +110,7 @@ CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
+CONFIG_DRM_DW_HDMI=y
 CONFIG_DRM_LIMA=y
 CONFIG_FB_SIMPLE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
diff --git linux-libre-6.6-gnu/arch/arm/crypto/sha256_glue.c linux-libre-6.6.46-gnu/arch/arm/crypto/sha256_glue.c
index 433ee4ddce6c..f85933fdec75 100644
--- linux-libre-6.6-gnu/arch/arm/crypto/sha256_glue.c
+++ linux-libre-6.6.46-gnu/arch/arm/crypto/sha256_glue.c
@@ -24,8 +24,8 @@
 
 #include "sha256_glue.h"
 
-asmlinkage void sha256_block_data_order(u32 *digest, const void *data,
-					unsigned int num_blks);
+asmlinkage void sha256_block_data_order(struct sha256_state *state,
+					const u8 *data, int num_blks);
 
 int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
 			     unsigned int len)
@@ -33,23 +33,20 @@ int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
 	/* make sure casting to sha256_block_fn() is safe */
 	BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0);
 
-	return sha256_base_do_update(desc, data, len,
-				(sha256_block_fn *)sha256_block_data_order);
+	return sha256_base_do_update(desc, data, len, sha256_block_data_order);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_update);
 
 static int crypto_sha256_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha256_base_do_finalize(desc,
-				(sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_finalize(desc, sha256_block_data_order);
 	return sha256_base_finish(desc, out);
 }
 
 int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
 			    unsigned int len, u8 *out)
 {
-	sha256_base_do_update(desc, data, len,
-			      (sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_update(desc, data, len, sha256_block_data_order);
 	return crypto_sha256_arm_final(desc, out);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_finup);
diff --git linux-libre-6.6-gnu/arch/arm/crypto/sha512-glue.c linux-libre-6.6.46-gnu/arch/arm/crypto/sha512-glue.c
index 0635a65aa488..1be5bd498af3 100644
--- linux-libre-6.6-gnu/arch/arm/crypto/sha512-glue.c
+++ linux-libre-6.6.46-gnu/arch/arm/crypto/sha512-glue.c
@@ -25,27 +25,25 @@ MODULE_ALIAS_CRYPTO("sha512");
 MODULE_ALIAS_CRYPTO("sha384-arm");
 MODULE_ALIAS_CRYPTO("sha512-arm");
 
-asmlinkage void sha512_block_data_order(u64 *state, u8 const *src, int blocks);
+asmlinkage void sha512_block_data_order(struct sha512_state *state,
+					u8 const *src, int blocks);
 
 int sha512_arm_update(struct shash_desc *desc, const u8 *data,
 		      unsigned int len)
 {
-	return sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	return sha512_base_do_update(desc, data, len, sha512_block_data_order);
 }
 
 static int sha512_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha512_base_do_finalize(desc,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_finalize(desc, sha512_block_data_order);
 	return sha512_base_finish(desc, out);
 }
 
 int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
 		     unsigned int len, u8 *out)
 {
-	sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_update(desc, data, len, sha512_block_data_order);
 	return sha512_arm_final(desc, out);
 }
 
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/arm_pmuv3.h linux-libre-6.6.46-gnu/arch/arm/include/asm/arm_pmuv3.h
index 72529f5e2bed..a41b503b7dcd 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/arm_pmuv3.h
+++ linux-libre-6.6.46-gnu/arch/arm/include/asm/arm_pmuv3.h
@@ -23,6 +23,8 @@
 #define PMUSERENR		__ACCESS_CP15(c9,  0, c14, 0)
 #define PMINTENSET		__ACCESS_CP15(c9,  0, c14, 1)
 #define PMINTENCLR		__ACCESS_CP15(c9,  0, c14, 2)
+#define PMCEID2			__ACCESS_CP15(c9,  0, c14, 4)
+#define PMCEID3			__ACCESS_CP15(c9,  0, c14, 5)
 #define PMMIR			__ACCESS_CP15(c9,  0, c14, 6)
 #define PMCCFILTR		__ACCESS_CP15(c14, 0, c15, 7)
 
@@ -150,21 +152,6 @@ static inline u64 read_pmccntr(void)
 	return read_sysreg(PMCCNTR);
 }
 
-static inline void write_pmxevcntr(u32 val)
-{
-	write_sysreg(val, PMXEVCNTR);
-}
-
-static inline u32 read_pmxevcntr(void)
-{
-	return read_sysreg(PMXEVCNTR);
-}
-
-static inline void write_pmxevtyper(u32 val)
-{
-	write_sysreg(val, PMXEVTYPER);
-}
-
 static inline void write_pmcntenset(u32 val)
 {
 	write_sysreg(val, PMCNTENSET);
@@ -205,16 +192,6 @@ static inline void write_pmuserenr(u32 val)
 	write_sysreg(val, PMUSERENR);
 }
 
-static inline u32 read_pmceid0(void)
-{
-	return read_sysreg(PMCEID0);
-}
-
-static inline u32 read_pmceid1(void)
-{
-	return read_sysreg(PMCEID1);
-}
-
 static inline void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr) {}
 static inline void kvm_clr_pmu_events(u32 clr) {}
 static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr)
@@ -231,6 +208,7 @@ static inline void kvm_vcpu_pmu_resync_el0(void) {}
 
 /* PMU Version in DFR Register */
 #define ARMV8_PMU_DFR_VER_NI        0
+#define ARMV8_PMU_DFR_VER_V3P1      0x4
 #define ARMV8_PMU_DFR_VER_V3P4      0x5
 #define ARMV8_PMU_DFR_VER_V3P5      0x6
 #define ARMV8_PMU_DFR_VER_IMP_DEF   0xF
@@ -251,4 +229,24 @@ static inline bool is_pmuv3p5(int pmuver)
 	return pmuver >= ARMV8_PMU_DFR_VER_V3P5;
 }
 
+static inline u64 read_pmceid0(void)
+{
+	u64 val = read_sysreg(PMCEID0);
+
+	if (read_pmuver() >= ARMV8_PMU_DFR_VER_V3P1)
+		val |= (u64)read_sysreg(PMCEID2) << 32;
+
+	return val;
+}
+
+static inline u64 read_pmceid1(void)
+{
+	u64 val = read_sysreg(PMCEID1);
+
+	if (read_pmuver() >= ARMV8_PMU_DFR_VER_V3P1)
+		val |= (u64)read_sysreg(PMCEID3) << 32;
+
+	return val;
+}
+
 #endif
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/cacheflush.h linux-libre-6.6.46-gnu/arch/arm/include/asm/cacheflush.h
index f6181f69577f..1075534b0a2e 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/cacheflush.h
+++ linux-libre-6.6.46-gnu/arch/arm/include/asm/cacheflush.h
@@ -340,6 +340,8 @@ static inline void flush_cache_vmap(unsigned long start, unsigned long end)
 		dsb(ishst);
 }
 
+#define flush_cache_vmap_early(start, end)	do { } while (0)
+
 static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
 {
 	if (!cache_is_vipt_nonaliasing())
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/dma.h linux-libre-6.6.46-gnu/arch/arm/include/asm/dma.h
index c6aded1b069c..e2a1916013e7 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/dma.h
+++ linux-libre-6.6.46-gnu/arch/arm/include/asm/dma.h
@@ -12,6 +12,9 @@
 	extern phys_addr_t arm_dma_zone_size; \
 	arm_dma_zone_size && arm_dma_zone_size < (0x100000000ULL - PAGE_OFFSET) ? \
 		(PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; })
+
+extern phys_addr_t arm_dma_limit;
+#define ARCH_LOW_ADDRESS_LIMIT arm_dma_limit
 #endif
 
 #ifdef CONFIG_ISA_DMA_API
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/exception.h linux-libre-6.6.46-gnu/arch/arm/include/asm/exception.h
index 58e039a851af..3c82975d46db 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/exception.h
+++ linux-libre-6.6.46-gnu/arch/arm/include/asm/exception.h
@@ -10,10 +10,6 @@
 
 #include <linux/interrupt.h>
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
 #define __exception_irq_entry	__irq_entry
-#else
-#define __exception_irq_entry
-#endif
 
 #endif /* __ASM_ARM_EXCEPTION_H */
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/irq_work.h linux-libre-6.6.46-gnu/arch/arm/include/asm/irq_work.h
index 3149e4dc1b54..8895999834cc 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/irq_work.h
+++ linux-libre-6.6.46-gnu/arch/arm/include/asm/irq_work.h
@@ -9,6 +9,4 @@ static inline bool arch_irq_work_has_interrupt(void)
 	return is_smp();
 }
 
-extern void arch_irq_work_raise(void);
-
 #endif /* _ASM_ARM_IRQ_WORK_H */
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/jump_label.h linux-libre-6.6.46-gnu/arch/arm/include/asm/jump_label.h
index e12d7d096fc0..e4eb54f6cd9f 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/jump_label.h
+++ linux-libre-6.6.46-gnu/arch/arm/include/asm/jump_label.h
@@ -11,7 +11,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 WASM(nop) "\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"
@@ -25,7 +25,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 WASM(b) " %l[l_yes]\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/kexec.h linux-libre-6.6.46-gnu/arch/arm/include/asm/kexec.h
index e62832dcba76..a8287e7ab9d4 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/kexec.h
+++ linux-libre-6.6.46-gnu/arch/arm/include/asm/kexec.h
@@ -2,8 +2,6 @@
 #ifndef _ARM_KEXEC_H
 #define _ARM_KEXEC_H
 
-#ifdef CONFIG_KEXEC
-
 /* Maximum physical address we can use pages from */
 #define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
 /* Maximum address we can reach in physical address mode */
@@ -82,6 +80,4 @@ static inline struct page *boot_pfn_to_page(unsigned long boot_pfn)
 
 #endif /* __ASSEMBLY__ */
 
-#endif /* CONFIG_KEXEC */
-
 #endif /* _ARM_KEXEC_H */
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/mman.h linux-libre-6.6.46-gnu/arch/arm/include/asm/mman.h
new file mode 100644
index 000000000000..2189e507c8e0
--- /dev/null
+++ linux-libre-6.6.46-gnu/arch/arm/include/asm/mman.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MMAN_H__
+#define __ASM_MMAN_H__
+
+#include <asm/system_info.h>
+#include <uapi/asm/mman.h>
+
+static inline bool arch_memory_deny_write_exec_supported(void)
+{
+	return cpu_architecture() >= CPU_ARCH_ARMv6;
+}
+#define arch_memory_deny_write_exec_supported arch_memory_deny_write_exec_supported
+
+#endif /* __ASM_MMAN_H__ */
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/uaccess.h linux-libre-6.6.46-gnu/arch/arm/include/asm/uaccess.h
index bb5c81823117..c28f5ec21e41 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/uaccess.h
+++ linux-libre-6.6.46-gnu/arch/arm/include/asm/uaccess.h
@@ -109,16 +109,6 @@ extern int __get_user_64t_1(void *);
 extern int __get_user_64t_2(void *);
 extern int __get_user_64t_4(void *);
 
-#define __GUP_CLOBBER_1	"lr", "cc"
-#ifdef CONFIG_CPU_USE_DOMAINS
-#define __GUP_CLOBBER_2	"ip", "lr", "cc"
-#else
-#define __GUP_CLOBBER_2 "lr", "cc"
-#endif
-#define __GUP_CLOBBER_4	"lr", "cc"
-#define __GUP_CLOBBER_32t_8 "lr", "cc"
-#define __GUP_CLOBBER_8	"lr", "cc"
-
 #define __get_user_x(__r2, __p, __e, __l, __s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
@@ -126,7 +116,7 @@ extern int __get_user_64t_4(void *);
 		"bl	__get_user_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
 		: "0" (__p), "r" (__l)					\
-		: __GUP_CLOBBER_##__s)
+		: "ip", "lr", "cc")
 
 /* narrowing a double-word get into a single 32bit word register: */
 #ifdef __ARMEB__
@@ -148,7 +138,7 @@ extern int __get_user_64t_4(void *);
 		"bl	__get_user_64t_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
 		: "0" (__p), "r" (__l)					\
-		: __GUP_CLOBBER_##__s)
+		: "ip", "lr", "cc")
 #else
 #define __get_user_x_64t __get_user_x
 #endif
diff --git linux-libre-6.6-gnu/arch/arm/kernel/Makefile linux-libre-6.6.46-gnu/arch/arm/kernel/Makefile
index d53f56d6f840..ae2f2b2b4e5a 100644
--- linux-libre-6.6-gnu/arch/arm/kernel/Makefile
+++ linux-libre-6.6.46-gnu/arch/arm/kernel/Makefile
@@ -59,7 +59,7 @@ obj-$(CONFIG_FUNCTION_TRACER)	+= entry-ftrace.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o insn.o patch.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o insn.o patch.o
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o insn.o patch.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_KEXEC_CORE)	+= machine_kexec.o relocate_kernel.o
 # Main staffs in KPROBES are in arch/arm/probes/ .
 obj-$(CONFIG_KPROBES)		+= patch.o insn.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
@@ -75,8 +75,6 @@ obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
-obj-$(CONFIG_CPU_PJ4)		+= pj4-cp0.o
-obj-$(CONFIG_CPU_PJ4B)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_regs.o perf_callchain.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_xscale.o perf_event_v6.o \
diff --git linux-libre-6.6-gnu/arch/arm/kernel/iwmmxt.S linux-libre-6.6.46-gnu/arch/arm/kernel/iwmmxt.S
index a0218c4867b9..4a335d3c5969 100644
--- linux-libre-6.6-gnu/arch/arm/kernel/iwmmxt.S
+++ linux-libre-6.6.46-gnu/arch/arm/kernel/iwmmxt.S
@@ -18,18 +18,6 @@
 #include <asm/assembler.h>
 #include "iwmmxt.h"
 
-#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
-#define PJ4(code...)		code
-#define XSC(code...)
-#elif defined(CONFIG_CPU_MOHAWK) || \
-	defined(CONFIG_CPU_XSC3) || \
-	defined(CONFIG_CPU_XSCALE)
-#define PJ4(code...)
-#define XSC(code...)		code
-#else
-#error "Unsupported iWMMXt architecture"
-#endif
-
 #define MMX_WR0		 	(0x00)
 #define MMX_WR1		 	(0x08)
 #define MMX_WR2		 	(0x10)
@@ -81,17 +69,13 @@ ENDPROC(iwmmxt_undef_handler)
 ENTRY(iwmmxt_task_enable)
 	inc_preempt_count r10, r3
 
-	XSC(mrc	p15, 0, r2, c15, c1, 0)
-	PJ4(mrc p15, 0, r2, c1, c0, 2)
+	mrc	p15, 0, r2, c15, c1, 0
 	@ CP0 and CP1 accessible?
-	XSC(tst	r2, #0x3)
-	PJ4(tst	r2, #0xf)
+	tst	r2, #0x3
 	bne	4f				@ if so no business here
 	@ enable access to CP0 and CP1
-	XSC(orr	r2, r2, #0x3)
-	XSC(mcr	p15, 0, r2, c15, c1, 0)
-	PJ4(orr	r2, r2, #0xf)
-	PJ4(mcr	p15, 0, r2, c1, c0, 2)
+	orr	r2, r2, #0x3
+	mcr	p15, 0, r2, c15, c1, 0
 
 	ldr	r3, =concan_owner
 	ldr	r2, [r0, #S_PC]			@ current task pc value
@@ -218,12 +202,9 @@ ENTRY(iwmmxt_task_disable)
 	bne	1f				@ no: quit
 
 	@ enable access to CP0 and CP1
-	XSC(mrc	p15, 0, r4, c15, c1, 0)
-	XSC(orr	r4, r4, #0x3)
-	XSC(mcr	p15, 0, r4, c15, c1, 0)
-	PJ4(mrc p15, 0, r4, c1, c0, 2)
-	PJ4(orr	r4, r4, #0xf)
-	PJ4(mcr	p15, 0, r4, c1, c0, 2)
+	mrc	p15, 0, r4, c15, c1, 0
+	orr	r4, r4, #0x3
+	mcr	p15, 0, r4, c15, c1, 0
 
 	mov	r0, #0				@ nothing to load
 	str	r0, [r3]			@ no more current owner
@@ -232,10 +213,8 @@ ENTRY(iwmmxt_task_disable)
 	bl	concan_save
 
 	@ disable access to CP0 and CP1
-	XSC(bic	r4, r4, #0x3)
-	XSC(mcr	p15, 0, r4, c15, c1, 0)
-	PJ4(bic	r4, r4, #0xf)
-	PJ4(mcr	p15, 0, r4, c1, c0, 2)
+	bic	r4, r4, #0x3
+	mcr	p15, 0, r4, c15, c1, 0
 
 	mrc	p15, 0, r2, c2, c0, 0
 	mov	r2, r2				@ cpwait
@@ -330,11 +309,9 @@ ENDPROC(iwmmxt_task_restore)
  */
 ENTRY(iwmmxt_task_switch)
 
-	XSC(mrc	p15, 0, r1, c15, c1, 0)
-	PJ4(mrc	p15, 0, r1, c1, c0, 2)
+	mrc	p15, 0, r1, c15, c1, 0
 	@ CP0 and CP1 accessible?
-	XSC(tst	r1, #0x3)
-	PJ4(tst	r1, #0xf)
+	tst	r1, #0x3
 	bne	1f				@ yes: block them for next task
 
 	ldr	r2, =concan_owner
@@ -344,10 +321,8 @@ ENTRY(iwmmxt_task_switch)
 	retne	lr				@ no: leave Concan disabled
 
 1:	@ flip Concan access
-	XSC(eor	r1, r1, #0x3)
-	XSC(mcr	p15, 0, r1, c15, c1, 0)
-	PJ4(eor r1, r1, #0xf)
-	PJ4(mcr	p15, 0, r1, c1, c0, 2)
+	eor	r1, r1, #0x3
+	mcr	p15, 0, r1, c15, c1, 0
 
 	mrc	p15, 0, r1, c2, c0, 0
 	sub	pc, lr, r1, lsr #32		@ cpwait and return
diff --git linux-libre-6.6-gnu/arch/arm/kernel/perf_callchain.c linux-libre-6.6.46-gnu/arch/arm/kernel/perf_callchain.c
index 7147edbe56c6..1d230ac9d0eb 100644
--- linux-libre-6.6-gnu/arch/arm/kernel/perf_callchain.c
+++ linux-libre-6.6.46-gnu/arch/arm/kernel/perf_callchain.c
@@ -85,8 +85,7 @@ static bool
 callchain_trace(void *data, unsigned long pc)
 {
 	struct perf_callchain_entry_ctx *entry = data;
-	perf_callchain_store(entry, pc);
-	return true;
+	return perf_callchain_store(entry, pc) == 0;
 }
 
 void
diff --git linux-libre-6.6-gnu/arch/arm/kernel/pj4-cp0.c linux-libre-6.6.46-gnu/arch/arm/kernel/pj4-cp0.c
deleted file mode 100644
index 4bca8098c4ff..000000000000
--- linux-libre-6.6-gnu/arch/arm/kernel/pj4-cp0.c
+++ /dev/null
@@ -1,135 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/kernel/pj4-cp0.c
- *
- * PJ4 iWMMXt coprocessor context switching and handling
- *
- * Copyright (c) 2010 Marvell International Inc.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/thread_notify.h>
-#include <asm/cputype.h>
-
-static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
-{
-	struct thread_info *thread = t;
-
-	switch (cmd) {
-	case THREAD_NOTIFY_FLUSH:
-		/*
-		 * flush_thread() zeroes thread->fpstate, so no need
-		 * to do anything here.
-		 *
-		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
-		 * initialised state information on the first fault.
-		 */
-
-	case THREAD_NOTIFY_EXIT:
-		iwmmxt_task_release(thread);
-		break;
-
-	case THREAD_NOTIFY_SWITCH:
-		iwmmxt_task_switch(thread);
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block __maybe_unused iwmmxt_notifier_block = {
-	.notifier_call	= iwmmxt_do,
-};
-
-
-static u32 __init pj4_cp_access_read(void)
-{
-	u32 value;
-
-	__asm__ __volatile__ (
-		"mrc	p15, 0, %0, c1, c0, 2\n\t"
-		: "=r" (value));
-	return value;
-}
-
-static void __init pj4_cp_access_write(u32 value)
-{
-	u32 temp;
-
-	__asm__ __volatile__ (
-		"mcr	p15, 0, %1, c1, c0, 2\n\t"
-#ifdef CONFIG_THUMB2_KERNEL
-		"isb\n\t"
-#else
-		"mrc	p15, 0, %0, c1, c0, 2\n\t"
-		"mov	%0, %0\n\t"
-		"sub	pc, pc, #4\n\t"
-#endif
-		: "=r" (temp) : "r" (value));
-}
-
-static int __init pj4_get_iwmmxt_version(void)
-{
-	u32 cp_access, wcid;
-
-	cp_access = pj4_cp_access_read();
-	pj4_cp_access_write(cp_access | 0xf);
-
-	/* check if coprocessor 0 and 1 are available */
-	if ((pj4_cp_access_read() & 0xf) != 0xf) {
-		pj4_cp_access_write(cp_access);
-		return -ENODEV;
-	}
-
-	/* read iWMMXt coprocessor id register p1, c0 */
-	__asm__ __volatile__ ("mrc    p1, 0, %0, c0, c0, 0\n" : "=r" (wcid));
-
-	pj4_cp_access_write(cp_access);
-
-	/* iWMMXt v1 */
-	if ((wcid & 0xffffff00) == 0x56051000)
-		return 1;
-	/* iWMMXt v2 */
-	if ((wcid & 0xffffff00) == 0x56052000)
-		return 2;
-
-	return -EINVAL;
-}
-
-/*
- * Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy
- * switch code handle iWMMXt context switching.
- */
-static int __init pj4_cp0_init(void)
-{
-	u32 __maybe_unused cp_access;
-	int vers;
-
-	if (!cpu_is_pj4())
-		return 0;
-
-	vers = pj4_get_iwmmxt_version();
-	if (vers < 0)
-		return 0;
-
-#ifndef CONFIG_IWMMXT
-	pr_info("PJ4 iWMMXt coprocessor detected, but kernel support is missing.\n");
-#else
-	cp_access = pj4_cp_access_read() & ~0xf;
-	pj4_cp_access_write(cp_access);
-
-	pr_info("PJ4 iWMMXt v%d coprocessor enabled.\n", vers);
-	elf_hwcap |= HWCAP_IWMMXT;
-	thread_register_notifier(&iwmmxt_notifier_block);
-	register_iwmmxt_undef_handler();
-#endif
-
-	return 0;
-}
-
-late_initcall(pj4_cp0_init);
diff --git linux-libre-6.6-gnu/arch/arm/kernel/sleep.S linux-libre-6.6.46-gnu/arch/arm/kernel/sleep.S
index a86a1d4f3461..93afd1005b43 100644
--- linux-libre-6.6-gnu/arch/arm/kernel/sleep.S
+++ linux-libre-6.6.46-gnu/arch/arm/kernel/sleep.S
@@ -127,6 +127,10 @@ cpu_resume_after_mmu:
 	instr_sync
 #endif
 	bl	cpu_init		@ restore the und/abt/irq banked regs
+#if defined(CONFIG_KASAN) && defined(CONFIG_KASAN_STACK)
+	mov	r0, sp
+	bl	kasan_unpoison_task_stack_below
+#endif
 	mov	r0, #0			@ return zero on success
 	ldmfd	sp!, {r4 - r11, pc}
 ENDPROC(cpu_resume_after_mmu)
diff --git linux-libre-6.6-gnu/arch/arm/lib/memset.S linux-libre-6.6.46-gnu/arch/arm/lib/memset.S
index d71ab61430b2..de75ae4d5ab4 100644
--- linux-libre-6.6-gnu/arch/arm/lib/memset.S
+++ linux-libre-6.6.46-gnu/arch/arm/lib/memset.S
@@ -17,6 +17,7 @@ ENTRY(__memset)
 ENTRY(mmioset)
 WEAK(memset)
 UNWIND( .fnstart         )
+	and	r1, r1, #255		@ cast to unsigned char
 	ands	r3, r0, #3		@ 1 unaligned?
 	mov	ip, r0			@ preserve r0 as return value
 	bne	6f			@ 1
diff --git linux-libre-6.6-gnu/arch/arm/mach-davinci/Kconfig linux-libre-6.6.46-gnu/arch/arm/mach-davinci/Kconfig
index 4316e1370627..2a8a9fe46586 100644
--- linux-libre-6.6-gnu/arch/arm/mach-davinci/Kconfig
+++ linux-libre-6.6.46-gnu/arch/arm/mach-davinci/Kconfig
@@ -4,12 +4,14 @@ menuconfig ARCH_DAVINCI
 	bool "TI DaVinci"
 	depends on ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
 	select DAVINCI_TIMER
 	select ZONE_DMA
 	select PM_GENERIC_DOMAINS if PM
 	select PM_GENERIC_DOMAINS_OF if PM && OF
 	select REGMAP_MMIO
 	select RESET_CONTROLLER
+	select PINCTRL
 	select PINCTRL_SINGLE
 
 if ARCH_DAVINCI
diff --git linux-libre-6.6-gnu/arch/arm/mach-davinci/pm.c linux-libre-6.6.46-gnu/arch/arm/mach-davinci/pm.c
index 8aa39db095d7..2c5155bd376b 100644
--- linux-libre-6.6-gnu/arch/arm/mach-davinci/pm.c
+++ linux-libre-6.6.46-gnu/arch/arm/mach-davinci/pm.c
@@ -61,7 +61,7 @@ static void davinci_pm_suspend(void)
 
 	/* Configure sleep count in deep sleep register */
 	val = __raw_readl(pm_config.deepsleep_reg);
-	val &= ~DEEPSLEEP_SLEEPCOUNT_MASK,
+	val &= ~DEEPSLEEP_SLEEPCOUNT_MASK;
 	val |= pm_config.sleepcount;
 	__raw_writel(val, pm_config.deepsleep_reg);
 
diff --git linux-libre-6.6-gnu/arch/arm/mach-ep93xx/core.c linux-libre-6.6.46-gnu/arch/arm/mach-ep93xx/core.c
index 71b113976420..8b1ec60a9a46 100644
--- linux-libre-6.6-gnu/arch/arm/mach-ep93xx/core.c
+++ linux-libre-6.6.46-gnu/arch/arm/mach-ep93xx/core.c
@@ -339,6 +339,7 @@ static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
 				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP_IDX("G", 0, NULL, 1,
 				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/mach-imx/mmdc.c linux-libre-6.6.46-gnu/arch/arm/mach-imx/mmdc.c
index 2157493b78a9..df69af932375 100644
--- linux-libre-6.6-gnu/arch/arm/mach-imx/mmdc.c
+++ linux-libre-6.6.46-gnu/arch/arm/mach-imx/mmdc.c
@@ -501,6 +501,10 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 
 	name = devm_kasprintf(&pdev->dev,
 				GFP_KERNEL, "mmdc%d", ret);
+	if (!name) {
+		ret = -ENOMEM;
+		goto pmu_release_id;
+	}
 
 	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
@@ -523,9 +527,10 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 
 pmu_register_err:
 	pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
-	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	hrtimer_cancel(&pmu_mmdc->hrtimer);
+pmu_release_id:
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 pmu_free:
 	kfree(pmu_mmdc);
 	return ret;
diff --git linux-libre-6.6-gnu/arch/arm/mach-omap2/board-n8x0.c linux-libre-6.6.46-gnu/arch/arm/mach-omap2/board-n8x0.c
index 8e3b5068d4ab..b45a3879eb34 100644
--- linux-libre-6.6-gnu/arch/arm/mach-omap2/board-n8x0.c
+++ linux-libre-6.6.46-gnu/arch/arm/mach-omap2/board-n8x0.c
@@ -79,10 +79,8 @@ static struct musb_hdrc_platform_data tusb_data = {
 static struct gpiod_lookup_table tusb_gpio_table = {
 	.dev_id = "musb-tusb",
 	.table = {
-		GPIO_LOOKUP("gpio-0-15", 0, "enable",
-			    GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-48-63", 10, "int",
-			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-31", 0, "enable", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-32-63", 26, "int", GPIO_ACTIVE_HIGH),
 		{ }
 	},
 };
@@ -140,12 +138,11 @@ static int slot1_cover_open;
 static int slot2_cover_open;
 static struct device *mmc_device;
 
-static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
+static struct gpiod_lookup_table nokia800_mmc_gpio_table = {
 	.dev_id = "mmci-omap.0",
 	.table = {
 		/* Slot switch, GPIO 96 */
-		GPIO_LOOKUP("gpio-80-111", 16,
-			    "switch", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
 		{ }
 	},
 };
@@ -153,12 +150,12 @@ static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
 static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
 	.dev_id = "mmci-omap.0",
 	.table = {
+		/* Slot switch, GPIO 96 */
+		GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
 		/* Slot index 1, VSD power, GPIO 23 */
-		GPIO_LOOKUP_IDX("gpio-16-31", 7,
-				"vsd", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-0-31", 23, "vsd", 1, GPIO_ACTIVE_HIGH),
 		/* Slot index 1, VIO power, GPIO 9 */
-		GPIO_LOOKUP_IDX("gpio-0-15", 9,
-				"vio", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-0-31", 9, "vio", 1, GPIO_ACTIVE_HIGH),
 		{ }
 	},
 };
@@ -415,8 +412,6 @@ static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
 
 static void __init n8x0_mmc_init(void)
 {
-	gpiod_add_lookup_table(&nokia8xx_mmc_gpio_table);
-
 	if (board_is_n810()) {
 		mmc1_data.slots[0].name = "external";
 
@@ -429,6 +424,8 @@ static void __init n8x0_mmc_init(void)
 		mmc1_data.slots[1].name = "internal";
 		mmc1_data.slots[1].ban_openended = 1;
 		gpiod_add_lookup_table(&nokia810_mmc_gpio_table);
+	} else {
+		gpiod_add_lookup_table(&nokia800_mmc_gpio_table);
 	}
 
 	mmc1_data.nr_slots = 2;
diff --git linux-libre-6.6-gnu/arch/arm/mach-omap2/id.c linux-libre-6.6.46-gnu/arch/arm/mach-omap2/id.c
index 98999aa8cc0c..7f387706368a 100644
--- linux-libre-6.6-gnu/arch/arm/mach-omap2/id.c
+++ linux-libre-6.6.46-gnu/arch/arm/mach-omap2/id.c
@@ -793,11 +793,16 @@ void __init omap_soc_device_init(void)
 
 	soc_dev_attr->machine  = soc_name;
 	soc_dev_attr->family   = omap_get_family();
+	if (!soc_dev_attr->family) {
+		kfree(soc_dev_attr);
+		return;
+	}
 	soc_dev_attr->revision = soc_rev;
 	soc_dev_attr->custom_attr_group = omap_soc_groups[0];
 
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->family);
 		kfree(soc_dev_attr);
 		return;
 	}
diff --git linux-libre-6.6-gnu/arch/arm/mach-omap2/pdata-quirks.c linux-libre-6.6.46-gnu/arch/arm/mach-omap2/pdata-quirks.c
index c1c0121f478d..b947bacf23a3 100644
--- linux-libre-6.6-gnu/arch/arm/mach-omap2/pdata-quirks.c
+++ linux-libre-6.6.46-gnu/arch/arm/mach-omap2/pdata-quirks.c
@@ -275,9 +275,19 @@ static struct platform_device pandora_backlight = {
 	.id	= -1,
 };
 
+static struct gpiod_lookup_table pandora_soc_audio_gpios = {
+	.dev_id = "soc-audio",
+	.table = {
+		GPIO_LOOKUP("gpio-112-127", 6, "dac", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-15", 14, "amp", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static void __init omap3_pandora_legacy_init(void)
 {
 	platform_device_register(&pandora_backlight);
+	gpiod_add_lookup_table(&pandora_soc_audio_gpios);
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
diff --git linux-libre-6.6-gnu/arch/arm/mach-pxa/spitz.c linux-libre-6.6.46-gnu/arch/arm/mach-pxa/spitz.c
index cc691b199429..a42417de53f7 100644
--- linux-libre-6.6-gnu/arch/arm/mach-pxa/spitz.c
+++ linux-libre-6.6.46-gnu/arch/arm/mach-pxa/spitz.c
@@ -520,10 +520,8 @@ static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
 static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.1", 6, "BL_CONT", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("sharp-scoop.1", 7, "BL_ON", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
@@ -531,10 +529,8 @@ static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 static struct gpiod_lookup_table akita_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 3, "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 4, "BL_CONT", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };
@@ -941,12 +937,9 @@ static inline void spitz_i2c_init(void) {}
 static struct gpiod_lookup_table spitz_audio_gpio_table = {
 	.dev_id = "spitz-audio",
 	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 3, "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 4, "mute-r", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.1", 8, "mic", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
@@ -954,12 +947,9 @@ static struct gpiod_lookup_table spitz_audio_gpio_table = {
 static struct gpiod_lookup_table akita_audio_gpio_table = {
 	.dev_id = "spitz-audio",
 	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 3, "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 4, "mute-r", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 2, "mic", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
diff --git linux-libre-6.6-gnu/arch/arm/mach-sunxi/mc_smp.c linux-libre-6.6.46-gnu/arch/arm/mach-sunxi/mc_smp.c
index cb63921232a6..277f6aa8e6c2 100644
--- linux-libre-6.6-gnu/arch/arm/mach-sunxi/mc_smp.c
+++ linux-libre-6.6.46-gnu/arch/arm/mach-sunxi/mc_smp.c
@@ -803,16 +803,16 @@ static int __init sunxi_mc_smp_init(void)
 	for (i = 0; i < ARRAY_SIZE(sunxi_mc_smp_data); i++) {
 		ret = of_property_match_string(node, "enable-method",
 					       sunxi_mc_smp_data[i].enable_method);
-		if (!ret)
+		if (ret >= 0)
 			break;
 	}
 
-	is_a83t = sunxi_mc_smp_data[i].is_a83t;
-
 	of_node_put(node);
-	if (ret)
+	if (ret < 0)
 		return -ENODEV;
 
+	is_a83t = sunxi_mc_smp_data[i].is_a83t;
+
 	if (!sunxi_mc_smp_cpu_table_init())
 		return -EINVAL;
 
diff --git linux-libre-6.6-gnu/arch/arm/mm/flush.c linux-libre-6.6.46-gnu/arch/arm/mm/flush.c
index d19d140a10c7..0749cf8a6637 100644
--- linux-libre-6.6-gnu/arch/arm/mm/flush.c
+++ linux-libre-6.6.46-gnu/arch/arm/mm/flush.c
@@ -296,6 +296,9 @@ void __sync_icache_dcache(pte_t pteval)
 		return;
 
 	folio = page_folio(pfn_to_page(pfn));
+	if (folio_test_reserved(folio))
+		return;
+
 	if (cache_is_vipt_aliasing())
 		mapping = folio_flush_mapping(folio);
 	else
diff --git linux-libre-6.6-gnu/arch/arm/vdso/Makefile linux-libre-6.6.46-gnu/arch/arm/vdso/Makefile
index 515ca33b854c..d761bd2e2f40 100644
--- linux-libre-6.6-gnu/arch/arm/vdso/Makefile
+++ linux-libre-6.6.46-gnu/arch/arm/vdso/Makefile
@@ -63,28 +63,3 @@ quiet_cmd_vdsold_and_vdso_check = LD      $@
 
 quiet_cmd_vdsomunge = MUNGE   $@
       cmd_vdsomunge = $(objtree)/$(obj)/vdsomunge $< $@
-
-#
-# Install the unstripped copy of vdso.so.dbg.  If our toolchain
-# supports build-id, install .build-id links as well.
-#
-# Cribbed from arch/x86/vdso/Makefile.
-#
-quiet_cmd_vdso_install = INSTALL $<
-define cmd_vdso_install
-	cp $< "$(MODLIB)/vdso/vdso.so"; \
-	if readelf -n $< | grep -q 'Build ID'; then \
-	  buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \
-	  first=`echo $$buildid | cut -b-2`; \
-	  last=`echo $$buildid | cut -b3-`; \
-	  mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \
-	  ln -sf "../../vdso.so" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \
-	fi
-endef
-
-$(MODLIB)/vdso: FORCE
-	@mkdir -p $(MODLIB)/vdso
-
-PHONY += vdso_install
-vdso_install: $(obj)/vdso.so.dbg $(MODLIB)/vdso
-	$(call cmd,vdso_install)
diff --git linux-libre-6.6-gnu/arch/arm/xen/enlighten.c linux-libre-6.6.46-gnu/arch/arm/xen/enlighten.c
index c392e18f1e43..a395b6c0aae2 100644
--- linux-libre-6.6-gnu/arch/arm/xen/enlighten.c
+++ linux-libre-6.6.46-gnu/arch/arm/xen/enlighten.c
@@ -164,9 +164,6 @@ static int xen_starting_cpu(unsigned int cpu)
 	BUG_ON(err);
 	per_cpu(xen_vcpu, cpu) = vcpup;
 
-	if (!xen_kernel_unmapped_at_usr())
-		xen_setup_runstate_info(cpu);
-
 after_register_vcpu_info:
 	enable_percpu_irq(xen_events_irq, 0);
 	return 0;
@@ -487,7 +484,8 @@ static int __init xen_guest_init(void)
 	 * for secondary CPUs as they are brought up.
 	 * For uniformity we use VCPUOP_register_vcpu_info even on cpu0.
 	 */
-	xen_vcpu_info = alloc_percpu(struct vcpu_info);
+	xen_vcpu_info = __alloc_percpu(sizeof(struct vcpu_info),
+				       1 << fls(sizeof(struct vcpu_info) - 1));
 	if (xen_vcpu_info == NULL)
 		return -ENOMEM;
 
@@ -523,9 +521,6 @@ static int __init xen_guest_init(void)
 		return -EINVAL;
 	}
 
-	if (!xen_kernel_unmapped_at_usr())
-		xen_time_setup_guest();
-
 	if (xen_initial_domain())
 		pvclock_gtod_register_notifier(&xen_pvclock_gtod_notifier);
 
@@ -535,7 +530,13 @@ static int __init xen_guest_init(void)
 }
 early_initcall(xen_guest_init);
 
-static int __init xen_pm_init(void)
+static int xen_starting_runstate_cpu(unsigned int cpu)
+{
+	xen_setup_runstate_info(cpu);
+	return 0;
+}
+
+static int __init xen_late_init(void)
 {
 	if (!xen_domain())
 		return -ENODEV;
@@ -548,9 +549,16 @@ static int __init xen_pm_init(void)
 		do_settimeofday64(&ts);
 	}
 
-	return 0;
+	if (xen_kernel_unmapped_at_usr())
+		return 0;
+
+	xen_time_setup_guest();
+
+	return cpuhp_setup_state(CPUHP_AP_ARM_XEN_RUNSTATE_STARTING,
+				 "arm/xen_runstate:starting",
+				 xen_starting_runstate_cpu, NULL);
 }
-late_initcall(xen_pm_init);
+late_initcall(xen_late_init);
 
 
 /* empty stubs */
diff --git linux-libre-6.6-gnu/arch/arm64/Kconfig linux-libre-6.6.46-gnu/arch/arm64/Kconfig
index 78f20e632712..9e0c1ac3d13e 100644
--- linux-libre-6.6-gnu/arch/arm64/Kconfig
+++ linux-libre-6.6.46-gnu/arch/arm64/Kconfig
@@ -196,7 +196,7 @@ config ARM64
 		if DYNAMIC_FTRACE_WITH_ARGS && DYNAMIC_FTRACE_WITH_CALL_OPS
 	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \
 		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG && \
-		    !CC_OPTIMIZE_FOR_SIZE)
+		    (CC_IS_CLANG || !CC_OPTIMIZE_FOR_SIZE))
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \
 		if DYNAMIC_FTRACE_WITH_ARGS
 	select HAVE_SAMPLE_FTRACE_DIRECT
@@ -1037,8 +1037,12 @@ config ARM64_ERRATUM_2645198
 
 	  If unsure, say Y.
 
+config ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	bool
+
 config ARM64_ERRATUM_2966298
 	bool "Cortex-A520: 2966298: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
 	default y
 	help
 	  This option adds the workaround for ARM Cortex-A520 erratum 2966298.
@@ -1050,6 +1054,58 @@ config ARM64_ERRATUM_2966298
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_3117295
+	bool "Cortex-A510: 3117295: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 3117295.
+
+	  On an affected Cortex-A510 core, a speculatively executed unprivileged
+	  load might leak data from a privileged level via a cache side channel.
+
+	  Work around this problem by executing a TLBI before returning to EL0.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_3194386
+	bool "Cortex-*/Neoverse-*: workaround for MSR SSBS not self-synchronizing"
+	default y
+	help
+	  This option adds the workaround for the following errata:
+
+	  * ARM Cortex-A76 erratum 3324349
+	  * ARM Cortex-A77 erratum 3324348
+	  * ARM Cortex-A78 erratum 3324344
+	  * ARM Cortex-A78C erratum 3324346
+	  * ARM Cortex-A78C erratum 3324347
+	  * ARM Cortex-A710 erratam 3324338
+	  * ARM Cortex-A720 erratum 3456091
+	  * ARM Cortex-A725 erratum 3456106
+	  * ARM Cortex-X1 erratum 3324344
+	  * ARM Cortex-X1C erratum 3324346
+	  * ARM Cortex-X2 erratum 3324338
+	  * ARM Cortex-X3 erratum 3324335
+	  * ARM Cortex-X4 erratum 3194386
+	  * ARM Cortex-X925 erratum 3324334
+	  * ARM Neoverse-N1 erratum 3324349
+	  * ARM Neoverse N2 erratum 3324339
+	  * ARM Neoverse-V1 erratum 3324341
+	  * ARM Neoverse V2 erratum 3324336
+	  * ARM Neoverse-V3 erratum 3312417
+
+	  On affected cores "MSR SSBS, #0" instructions may not affect
+	  subsequent speculative instructions, which may permit unexepected
+	  speculative store bypassing.
+
+	  Work around this problem by placing a Speculation Barrier (SB) or
+	  Instruction Synchronization Barrier (ISB) after kernel changes to
+	  SSBS. The presence of the SSBS special-purpose register is hidden
+	  from hwcaps and EL0 reads of ID_AA64PFR1_EL1, such that userspace
+	  will use the PR_SPEC_STORE_BYPASS prctl to change SSBS.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
@@ -1368,6 +1424,8 @@ choice
 config CPU_BIG_ENDIAN
 	bool "Build big-endian kernel"
 	depends on !LD_IS_LLD || LLD_VERSION >= 130000
+	# https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161c
+	depends on AS_IS_GNU || AS_VERSION >= 150000
 	help
 	  Say Y if you plan on running a kernel with a big-endian userspace.
 
diff --git linux-libre-6.6-gnu/arch/arm64/Makefile linux-libre-6.6.46-gnu/arch/arm64/Makefile
index 2d49aea0ff67..9a2d3723cd0f 100644
--- linux-libre-6.6-gnu/arch/arm64/Makefile
+++ linux-libre-6.6.46-gnu/arch/arm64/Makefile
@@ -158,7 +158,7 @@ endif
 
 all:	$(notdir $(KBUILD_IMAGE))
 
-
+vmlinuz.efi: Image
 Image vmlinuz.efi: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
@@ -169,12 +169,6 @@ install: KBUILD_IMAGE := $(boot)/Image
 install zinstall:
 	$(call cmd,install)
 
-PHONY += vdso_install
-vdso_install:
-	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
-	$(if $(CONFIG_COMPAT_VDSO), \
-		$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@)
-
 archprepare:
 	$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
 ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
@@ -205,6 +199,9 @@ ifdef CONFIG_COMPAT_VDSO
 endif
 endif
 
+vdso-install-y				+= arch/arm64/kernel/vdso/vdso.so.dbg
+vdso-install-$(CONFIG_COMPAT_VDSO)	+= arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
+
 include $(srctree)/scripts/Makefile.defconf
 
 PHONY += virtconfig
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 9ec49ac2f6fd..381d58cea092 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -291,6 +291,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
index 4903d6358112..855b7d43bc50 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -166,6 +166,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index ca1d287a0a01..d11e5041bae9 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -406,6 +406,7 @@
 				function = "spi1";
 			};
 
+			/omit-if-no-ref/
 			spdif_tx_pin: spdif-tx-pin {
 				pins = "PH7";
 				function = "spdif";
@@ -655,10 +656,8 @@
 			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
 			clock-names = "apb", "spdif";
 			resets = <&ccu RST_BUS_SPDIF>;
-			dmas = <&dma 2>;
-			dma-names = "tx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spdif_tx_pin>;
+			dmas = <&dma 2>, <&dma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
index 15290e6892fc..fc7315b94406 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -68,10 +68,7 @@
 &emac0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
-	phy-mode = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
-	allwinner,rx-delay-ps = <3100>;
-	allwinner,tx-delay-ps = <700>;
 	status = "okay";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
index d83852e72f06..b5d713926a34 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -13,6 +13,9 @@
 };
 
 &emac0 {
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	phy-mode = "rgmii";
 	phy-supply = <&reg_dcdce>;
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
index 00fe28caac93..b3b1b8692125 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -13,6 +13,8 @@
 };
 
 &emac0 {
+	allwinner,tx-delay-ps = <700>;
+	phy-mode = "rgmii-rxid";
 	phy-supply = <&reg_dldo1>;
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amazon/alpine-v2.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index dccbba6e7f98..dbf2dce8d1d6 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -145,7 +145,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <160>;
 			al,msi-num-spis = <160>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amazon/alpine-v3.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
index 39481d7fd7d4..3ea178acdddf 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -355,7 +355,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <336>;
 			al,msi-num-spis = <959>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index ff68b911b729..0ff0d090548d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -215,6 +215,11 @@
 				#sound-dai-cells = <0>;
 				status = "disabled";
 
+				assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+						  <&clkc CLKID_HDMI>;
+				assigned-clock-parents = <&xtal>, <0>;
+				assigned-clock-rates = <0>, <24000000>;
+
 				/* VPU VENC Input */
 				hdmi_tx_venc_port: port@0 {
 					reg = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-g12.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index 6a1f4dcf6488..7b655e07e80c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -367,6 +367,10 @@
 	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
 };
 
+&hdmi_tx {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
 &vpu {
 	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 12ef6e81c8bd..ed00e67e6923 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -311,10 +311,16 @@
 		 <&reset RESET_HDMI_SYSTEM_RESET>,
 		 <&reset RESET_HDMI_TX>;
 	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
+	clocks = <&clkc CLKID_HDMI>,
+		 <&clkc CLKID_HDMI_PCLK>,
 		 <&clkc CLKID_GCLK_VENCI_INT0>;
 	clock-names = "isfr", "iahb", "venci";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+
+	assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+			  <&clkc CLKID_HDMI>;
+	assigned-clock-parents = <&xtal>, <0>;
+	assigned-clock-rates = <0>, <24000000>;
 };
 
 &sysctrl {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 17bcfa4702e1..f58d1790de1c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -323,10 +323,16 @@
 		 <&reset RESET_HDMI_SYSTEM_RESET>,
 		 <&reset RESET_HDMI_TX>;
 	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
+	clocks = <&clkc CLKID_HDMI>,
+		 <&clkc CLKID_HDMI_PCLK>,
 		 <&clkc CLKID_GCLK_VENCI_INT0>;
 	clock-names = "isfr", "iahb", "venci";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+
+	assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+			  <&clkc CLKID_HDMI>;
+	assigned-clock-parents = <&xtal>, <0>;
+	assigned-clock-rates = <0>, <24000000>;
 };
 
 &sysctrl {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
index 8ffbcb2b1ac5..bbd3c05cbd90 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -15,7 +15,7 @@
 	#size-cells = <2>;
 
 	aliases {
-		serial0 = &uart_B;
+		serial0 = &uart_b;
 	};
 
 	memory@0 {
@@ -25,6 +25,6 @@
 
 };
 
-&uart_B {
+&uart_b {
 	status = "okay";
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index f24460186d3d..a781eabe21f0 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -61,10 +61,15 @@
 		#clock-cells = <0>;
 	};
 
-	pwrc: power-controller {
-		compatible = "amlogic,meson-s4-pwrc";
-		#power-domain-cells = <1>;
-		status = "okay";
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+
+			pwrc: power-controller {
+				compatible = "amlogic,meson-s4-pwrc";
+				#power-domain-cells = <1>;
+			};
+		};
 	};
 
 	soc {
@@ -118,14 +123,14 @@
 					<10 11 12 13 14 15 16 17 18 19 20 21>;
 			};
 
-			uart_B: serial@7a000 {
+			uart_b: serial@7a000 {
 				compatible = "amlogic,meson-s4-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x7a000 0x0 0x18>;
 				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
 				clocks = <&xtal>, <&xtal>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
 			};
 
 			reset: reset-controller@2000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 643f94d9d08e..13e742ba00be 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -339,7 +339,7 @@
 		};
 
 		spdifin: audio-controller@400 {
-			compatible = "amlogic,g12a-spdifin",
+			compatible = "amlogic,sm1-spdifin",
 				     "amlogic,axg-spdifin";
 			reg = <0x0 0x400 0x0 0x30>;
 			#sound-dai-cells = <0>;
@@ -353,7 +353,7 @@
 		};
 
 		spdifout_a: audio-controller@480 {
-			compatible = "amlogic,g12a-spdifout",
+			compatible = "amlogic,sm1-spdifout",
 				     "amlogic,axg-spdifout";
 			reg = <0x0 0x480 0x0 0x50>;
 			#sound-dai-cells = <0>;
@@ -518,6 +518,10 @@
 		     "amlogic,meson-gpio-intc";
 };
 
+&hdmi_tx {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
 &pcie {
 	power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
index 2f124b027bbf..aadfa0ae0525 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -227,9 +227,6 @@
 				brcm,num-gphy = <5>;
 				brcm,num-rgmii-ports = <2>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ports: ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 9dcd25ec2c04..896d1f33b5b6 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -586,6 +586,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index f049687d6b96..d8516ec0dae7 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -450,6 +450,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinmux 0 0 16>,
 					<&pinmux 16 71 2>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index d2f5345d0560..717288bbdb8b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -1186,26 +1186,34 @@
 			dma-coherent;
 		};
 
-		usb0: usb@3100000 {
-			status = "disabled";
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3100000 0x0 0x10000>;
-			interrupts = <0 80 0x4>; /* Level high type */
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-		};
+		bus: bus {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "simple-bus";
+			ranges;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+			usb0: usb@3100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3100000 0x0 0x10000>;
+				interrupts = <0 80 0x4>; /* Level high type */
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
 
-		usb1: usb@3110000 {
-			status = "disabled";
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3110000 0x0 0x10000>;
-			interrupts = <0 81 0x4>; /* Level high type */
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			usb1: usb@3110000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3110000 0x0 0x10000>;
+				interrupts = <0 81 0x4>; /* Level high type */
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
 		};
 
 		ccn@4000000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
index 9b1b522517f8..0878a15acc1b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -82,12 +82,9 @@
 		pinctrl-0 = <&pinctrl_wifi_pdn>;
 		gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		regulator-always-on;
 		regulator-name = "wifi_pwrdn_fake_regulator";
 		regulator-settling-time-us = <100>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
 	};
 
 	reg_pcie_switch: regulator-pcie-switch {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index fc1a5d34382b..49298cd9eb0d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -41,7 +41,7 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		fsl,usbphy = <&usbphy1>;
 		fsl,usbmisc = <&usbmisc1 0>;
-		clocks = <&usb2_lpcg 0>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
 		ahb-burst-config = <0x0>;
 		tx-burst-size-dword = <0x10>;
 		rx-burst-size-dword = <0x10>;
@@ -58,7 +58,7 @@ conn_subsys: bus@5b000000 {
 	usbphy1: usbphy@5b100000 {
 		compatible = "fsl,imx7ulp-usbphy";
 		reg = <0x5b100000 0x1000>;
-		clocks = <&usb2_lpcg 1>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
 		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
 		status = "disabled";
 	};
@@ -67,8 +67,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
@@ -78,8 +78,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
@@ -91,8 +91,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index adb98a72bdfd..89857e14c461 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -27,8 +27,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi0_lpcg 0>,
-			 <&spi0_lpcg 1>;
+		clocks = <&spi0_lpcg IMX_LPCG_CLK_0>,
+			 <&spi0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -43,8 +43,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi1_lpcg 0>,
-			 <&spi1_lpcg 1>;
+		clocks = <&spi1_lpcg IMX_LPCG_CLK_0>,
+			 <&spi1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -59,8 +59,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi2_lpcg 0>,
-			 <&spi2_lpcg 1>;
+		clocks = <&spi2_lpcg IMX_LPCG_CLK_0>,
+			 <&spi2_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -75,8 +75,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi3_lpcg 0>,
-			 <&spi3_lpcg 1>;
+		clocks = <&spi3_lpcg IMX_LPCG_CLK_0>,
+			 <&spi3_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -282,8 +282,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a880000 0x10000>;
 		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc0_lpcg 0>,
-			 <&adc0_lpcg 1>;
+		clocks = <&adc0_lpcg IMX_LPCG_CLK_0>,
+			 <&adc0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -297,8 +297,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a890000 0x10000>;
 		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc1_lpcg 0>,
-			 <&adc1_lpcg 1>;
+		clocks = <&adc1_lpcg IMX_LPCG_CLK_0>,
+			 <&adc1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -311,8 +311,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a8d0000 0x10000>;
 		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -332,8 +332,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN1 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -353,8 +353,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN2 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index ea8c93757521..c66449798efc 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -32,11 +32,12 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d000000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm0_lpcg 4>,
-			 <&pwm0_lpcg 1>;
+		clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm0_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
@@ -44,11 +45,12 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d010000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm1_lpcg 4>,
-			 <&pwm1_lpcg 1>;
+		clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm1_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
@@ -56,11 +58,12 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d020000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm2_lpcg 4>,
-			 <&pwm2_lpcg 1>;
+		clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm2_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
@@ -68,11 +71,12 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d030000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm3_lpcg 4>,
-			 <&pwm3_lpcg 1>;
+		clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm3_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
index 8b16bd68576c..d9fa0deea700 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -294,8 +294,8 @@
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
 		>;
 	};
 
@@ -313,19 +313,19 @@
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
 		>;
 	};
 
@@ -337,40 +337,40 @@
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
index dcec57c20399..aab8e2421650 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -279,8 +279,8 @@
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
 		>;
 	};
 
@@ -292,19 +292,19 @@
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
 		>;
 	};
 
@@ -316,40 +316,40 @@
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index 6e75ab879bf5..60abcb636ced 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -210,7 +210,7 @@
 		reg = <0x52>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc>;
-		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_LOW>;
 		trickle-diode-disable;
 	};
 };
@@ -252,8 +252,8 @@
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
 		>;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
index 1f8326613ee9..2076148e0862 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
@@ -237,8 +237,8 @@
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
 		>;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
index 0ce60ad9c7d5..26d4afdbca6f 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -47,17 +47,6 @@
 		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb1_en>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
 };
 
 /* off-board header */
@@ -145,9 +134,10 @@
 };
 
 &usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	dr_mode = "otg";
 	over-current-active-low;
-	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
@@ -205,14 +195,6 @@
 		>;
 	};
 
-	pinctrl_reg_usb1_en: regusb1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x41
-			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
-			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
-		>;
-	};
-
 	pinctrl_spi2: spi2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
@@ -235,4 +217,11 @@
 			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
 		>;
 	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 6f0811587142..14d20a33af8e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -929,7 +929,7 @@
 	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
 	pinctrl_gpio_9_dsi: gpio9dsigrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x146>;	/* SODIMM 17 */
+			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x1c6>;	/* SODIMM 17 */
 	};
 
 	/* Verdin GPIO_10_DSI (pulled-up as active-low) */
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 9c015955ce58..6e545a6dfb38 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -399,6 +399,7 @@
 						      "pll8k", "pll11k", "clkext3";
 					dmas = <&sdma2 24 25 0x80000000>;
 					dma-names = "rx";
+					#sound-dai-cells = <0>;
 					status = "disabled";
 				};
 
@@ -1407,7 +1408,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
@@ -1422,7 +1423,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index cde01617f6d5..79c3d597809e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -371,6 +371,7 @@
 						      "pll8k", "pll11k", "clkext3";
 					dmas = <&sdma2 24 25 0x80000000>;
 					dma-names = "rx";
+					#sound-dai-cells = <0>;
 					status = "disabled";
 				};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index 13674dc64be9..cd44bf83745c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -121,7 +121,7 @@
 	flash@0 {	/* W25Q128JVEI */
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <100000000>;	/* Up to 133 MHz */
+		spi-max-frequency = <40000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <1>;
 	};
@@ -484,7 +484,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
+	status = "disabled";
 };
 
 &usb3_phy0 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
index 28db9349ed62..267ceffc02d8 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -284,7 +284,6 @@
 	usb_hub_2_x: hub@1 {
 		compatible = "usbbda,5411";
 		reg = <1>;
-		reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
 		vdd-supply = <&reg_usb_hub>;
 		peer-hub = <&usb_hub_3_x>;
 	};
@@ -293,7 +292,6 @@
 	usb_hub_3_x: hub@2 {
 		compatible = "usbbda,411";
 		reg = <2>;
-		reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
 		vdd-supply = <&reg_usb_hub>;
 		peer-hub = <&usb_hub_2_x>;
 	};
@@ -443,7 +441,6 @@
 	pinctrl_usb1: usb1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR				0x10
-			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25				0x19
 		>;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index cb1953d14aa9..eae39c1cb985 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -251,8 +251,8 @@
 				  <&clk IMX8MP_CLK_CLKOUT2>,
 				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
-		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
-		reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		assigned-clock-rates = <13000000>, <13000000>, <208000000>;
+		reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 
 		ports {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index cc9d468b43ab..92f8cc05fe9d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -23,7 +23,7 @@
 
 		port {
 			hdmi_connector_in: endpoint {
-				remote-endpoint = <&adv7533_out>;
+				remote-endpoint = <&adv7535_out>;
 			};
 		};
 	};
@@ -107,6 +107,13 @@
 		enable-active-high;
 	};
 
+	reg_vext_3v3: regulator-vext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "wm8960-audio";
@@ -342,7 +349,7 @@
 				regulator-always-on;
 			};
 
-			BUCK5 {
+			reg_buck5: BUCK5 {
 				regulator-name = "BUCK5";
 				regulator-min-microvolt = <1650000>;
 				regulator-max-microvolt = <1950000>;
@@ -393,14 +400,16 @@
 
 	hdmi@3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
+		avdd-supply = <&reg_buck5>;
+		dvdd-supply = <&reg_buck5>;
+		pvdd-supply = <&reg_buck5>;
+		a2vdd-supply = <&reg_buck5>;
+		v3p3-supply = <&reg_vext_3v3>;
+		v1p2-supply = <&reg_buck5>;
 
 		ports {
 			#address-cells = <1>;
@@ -409,7 +418,7 @@
 			port@0 {
 				reg = <0>;
 
-				adv7533_in: endpoint {
+				adv7535_in: endpoint {
 					remote-endpoint = <&dsi_out>;
 				};
 			};
@@ -417,7 +426,7 @@
 			port@1 {
 				reg = <1>;
 
-				adv7533_out: endpoint {
+				adv7535_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
@@ -502,7 +511,7 @@
 			reg = <1>;
 
 			dsi_out: endpoint {
-				remote-endpoint = <&adv7533_in>;
+				remote-endpoint = <&adv7535_in>;
 				data-lanes = <1 2 3 4>;
 			};
 		};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 4240e20d38ac..258e90cc16ff 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -168,6 +168,13 @@
 		enable-active-high;
 	};
 
+	reg_vcc_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_vcc_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -464,7 +471,7 @@
 		clock-names = "mclk";
 		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
 		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
-		iov-supply = <&reg_vcc_3v3>;
+		iov-supply = <&reg_vcc_1v8>;
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
index 68c62def4c06..d27bfba1b4b8 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -161,7 +161,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm4330-bt";
-		shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index d247b6d33303..7ebda8d7bcb6 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -785,6 +785,23 @@
 						reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
 					};
 
+					pgc_mlmix: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
+						clocks = <&clk IMX8MP_CLK_ML_AXI>,
+							 <&clk IMX8MP_CLK_ML_AHB>,
+							 <&clk IMX8MP_CLK_NPU_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
+								  <&clk IMX8MP_CLK_ML_AXI>,
+								  <&clk IMX8MP_CLK_ML_AHB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <800000000>,
+								       <800000000>,
+								       <300000000>;
+					};
+
 					pgc_audio: power-domain@5 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>;
@@ -817,6 +834,12 @@
 						assigned-clock-rates = <800000000>, <400000000>;
 					};
 
+					pgc_vpumix: power-domain@8 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
+						clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
+					};
+
 					pgc_gpu3d: power-domain@9 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_GPU3D>;
@@ -832,60 +855,64 @@
 							 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
 					};
 
-					pgc_mipi_phy2: power-domain@16 {
+					pgc_vpu_g1: power-domain@11 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
+						clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
 					};
 
-					pgc_hsiomix: power-domain@17 {
+					pgc_vpu_g2: power-domain@12 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
-						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
-							 <&clk IMX8MP_CLK_HSIO_ROOT>;
-						assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
-						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
-						assigned-clock-rates = <500000000>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
+						clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+
 					};
 
-					pgc_ispdwp: power-domain@18 {
+					pgc_vpu_vc8000e: power-domain@13 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
-						clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
+						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
 					};
 
-					pgc_vpumix: power-domain@19 {
+					pgc_hdmimix: power-domain@14 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
-						clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_HDMIMIX>;
+						clocks = <&clk IMX8MP_CLK_HDMI_ROOT>,
+							 <&clk IMX8MP_CLK_HDMI_APB>;
+						assigned-clocks = <&clk IMX8MP_CLK_HDMI_AXI>,
+								  <&clk IMX8MP_CLK_HDMI_APB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,
+									 <&clk IMX8MP_SYS_PLL1_133M>;
+						assigned-clock-rates = <500000000>, <133000000>;
 					};
 
-					pgc_vpu_g1: power-domain@20 {
+					pgc_hdmi_phy: power-domain@15 {
 						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
-						clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_HDMI_PHY>;
 					};
 
-					pgc_vpu_g2: power-domain@21 {
+					pgc_mipi_phy2: power-domain@16 {
 						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
-						clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
 					};
 
-					pgc_vpu_vc8000e: power-domain@22 {
+					pgc_hsiomix: power-domain@17 {
 						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
-						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+							 <&clk IMX8MP_CLK_HSIO_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+						assigned-clock-rates = <500000000>;
 					};
 
-					pgc_mlmix: power-domain@24 {
+					pgc_ispdwp: power-domain@18 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
-						clocks = <&clk IMX8MP_CLK_ML_AXI>,
-							 <&clk IMX8MP_CLK_ML_AHB>,
-							 <&clk IMX8MP_CLK_NPU_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
+						clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
 					};
 				};
 			};
@@ -1831,6 +1858,27 @@
 				#power-domain-cells = <1>;
 				#clock-cells = <0>;
 			};
+
+			hdmi_blk_ctrl: blk-ctrl@32fc0000 {
+				compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon";
+				reg = <0x32fc0000 0x1000>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_ROOT>,
+					 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+					 <&clk IMX8MP_CLK_HDMI_24M>,
+					 <&clk IMX8MP_CLK_HDMI_FDCC_TST>;
+				clock-names = "apb", "axi", "ref_266m", "ref_24m", "fdcc";
+				power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmi_phy>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>;
+				power-domain-names = "bus", "irqsteer", "lcdif",
+						     "pai", "pvi", "trng",
+						     "hdmi-tx", "hdmi-tx-phy",
+						     "hdcp", "hrv";
+				#power-domain-cells = <1>;
+			};
 		};
 
 		pcie: pcie@33800000 {
@@ -1970,6 +2018,18 @@
 			interconnect-names = "g1", "g2", "vc8000e";
 		};
 
+		npu: npu@38500000 {
+			compatible = "vivante,gc";
+			reg = <0x38500000 0x200000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_ML_AXI>,
+				 <&clk IMX8MP_CLK_ML_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			power-domains = <&pgc_mlmix>;
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
@@ -2030,6 +2090,7 @@
 				phys = <&usb3_phy0>, <&usb3_phy0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
 			};
 
 		};
@@ -2072,6 +2133,7 @@
 				phys = <&usb3_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
 			};
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index a0bd3d5942e0..550973373e8e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1649,6 +1649,7 @@
 			phys = <&usb3_phy0>, <&usb3_phy0>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg1>;
+			snps,parkmode-disable-ss-quirk;
 			status = "disabled";
 		};
 
@@ -1680,6 +1681,7 @@
 			phys = <&usb3_phy1>, <&usb3_phy1>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg2>;
+			snps,parkmode-disable-ss-quirk;
 			status = "disabled";
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 0b34cc2250e1..a9ab87699f3d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -36,7 +36,7 @@
 		regulator-name = "SD1_SPWR";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
-		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index e9b198c13b2f..d896135f31fc 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -49,15 +49,15 @@
 };
 
 &flexcan2 {
-	clocks = <&can1_lpcg 1>,
-		 <&can1_lpcg 0>;
+	clocks = <&can1_lpcg IMX_LPCG_CLK_4>,
+		 <&can1_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };
 
 &flexcan3 {
-	clocks = <&can2_lpcg 1>,
-		 <&can2_lpcg 0>;
+	clocks = <&can2_lpcg IMX_LPCG_CLK_4>,
+		 <&can2_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
index 7764b4146e0a..2bbdacb1313f 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
@@ -8,5 +8,5 @@
 };
 
 &jpegenc {
-	compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgenc";
+	compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index cafd39130eb8..a06ca740f540 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -168,7 +168,6 @@
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	bus-width = <4>;
 	status = "okay";
-	no-sdio;
 	no-mmc;
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index f06139bdff97..3c5c67ebee5d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -577,7 +577,7 @@
 		fsl,pins = <
 			MX93_PAD_UART2_TXD__LPUART2_TX		0x31e
 			MX93_PAD_UART2_RXD__LPUART2_RX		0x31e
-			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B	0x31e
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B	0x51e
 		>;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
index dcf6e4846ac9..943b7e665563 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -373,7 +373,7 @@
 					compatible = "fsl,imx93-src-slice";
 					reg = <0x44462400 0x400>, <0x44465800 0x400>;
 					#power-domain-cells = <0>;
-					clocks = <&clk IMX93_CLK_MEDIA_AXI>,
+					clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
 						 <&clk IMX93_CLK_MEDIA_APB>;
 				};
 			};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index ed1b5a7a6067..d01023401d7e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -58,7 +58,7 @@
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
-		      <0x0 0xf1002000 0x0 0x100>;   /* GICC */
+		      <0x0 0xf1002000 0x0 0x2000>;  /* GICC */
 		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
index 970047f2dabd..c06e011a6c3f 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -25,9 +25,6 @@
 			gpios = <&gpio28 0 0>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ldo3: ldo3 { /* HDMI */
 					regulator-name = "ldo3";
 					regulator-min-microvolt = <1500000>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/lg/lg1312.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/lg/lg1312.dtsi
index 48ec4ebec0a8..b864ffa74ea8 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -126,7 +126,6 @@
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/lg/lg1313.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/lg/lg1313.dtsi
index 3869460aa5dc..996fb39bb50c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -126,7 +126,6 @@
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 9eab2bb22134..805ef2d79b40 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -130,7 +130,7 @@
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 		interrupt-parent = <&gpiosb>;
-		interrupts = <5 0>; /* GPIO2_5 */
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index e300145ad1a6..1cc3fa1c354d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -431,14 +431,14 @@
 			crypto: crypto@90000 {
 				compatible = "inside-secure,safexcel-eip97ies";
 				reg = <0x90000 0x20000>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "mem", "ring0", "ring1",
-						  "ring2", "ring3", "eip";
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "ring0", "ring1", "ring2",
+						  "ring3", "eip", "mem";
 				clocks = <&nb_periph_clk 15>;
 			};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 2c920e22cec2..7ec7c789d87e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -138,7 +138,6 @@
 
 			odmi: odmi@300000 {
 				compatible = "marvell,odmi-controller";
-				interrupt-controller;
 				msi-controller;
 				marvell,odmi-frames = <4>;
 				reg = <0x300000 0x4000>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 4ec1aae0a3a9..7e595ac80043 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -511,14 +511,14 @@
 		CP11X_LABEL(crypto): crypto@800000 {
 			compatible = "inside-secure,safexcel-eip197b";
 			reg = <0x800000 0x200000>;
-			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
-				<88 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <88 IRQ_TYPE_LEVEL_HIGH>,
 				<89 IRQ_TYPE_LEVEL_HIGH>,
 				<90 IRQ_TYPE_LEVEL_HIGH>,
 				<91 IRQ_TYPE_LEVEL_HIGH>,
-				<92 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mem", "ring0", "ring1",
-				"ring2", "ring3", "eip";
+				<92 IRQ_TYPE_LEVEL_HIGH>,
+				<87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3",
+					  "eip", "mem";
 			clock-names = "core", "reg";
 			clocks = <&CP11X_LABEL(clk) 1 26>,
 				 <&CP11X_LABEL(clk) 1 17>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 32cfb3e2efc3..47d45ff3d6f5 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -120,7 +120,7 @@
 				       "mpp59", "mpp60", "mpp61";
 			marvell,function = "sdio";
 		};
-		cp0_spi0_pins: cp0-spi-pins-0 {
+		cp0_spi1_pins: cp0-spi-pins-1 {
 			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
 			marvell,function = "spi1";
 		};
@@ -170,7 +170,7 @@
 
 &cp0_spi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi0_pins>;
+	pinctrl-0 = <&cp0_spi1_pins>;
 	reg = <0x700680 0x50>,		/* control */
 	      <0x2000000 0x1000000>;	/* CS0 */
 	status = "okay";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index c7de1ea0d470..6eb6a175de38 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -307,7 +307,7 @@
 &cp0_spi1 {
 	status = "disabled";
 	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi0_pins>;
+	pinctrl-0 = <&cp0_spi1_pins>;
 	reg = <0x700680 0x50>;
 
 	flash@0 {
@@ -371,7 +371,7 @@
 				       "mpp59", "mpp60", "mpp61";
 			marvell,function = "sdio";
 		};
-		cp0_spi0_pins: cp0-spi-pins-0 {
+		cp0_spi1_pins: cp0-spi-pins-1 {
 			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
 			marvell,function = "spi1";
 		};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index fffdb7bbf889..2d0ef6f23b3a 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -129,7 +129,7 @@
 };
 
 &pio {
-	eth_default: eth_default {
+	eth_default: eth-default-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>,
@@ -156,7 +156,7 @@
 		};
 	};
 
-	eth_sleep: eth_sleep {
+	eth_sleep: eth-sleep-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>,
@@ -182,14 +182,14 @@
 		};
 	};
 
-	usb0_id_pins_float: usb0_iddig {
+	usb0_id_pins_float: usb0-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
 			bias-pull-up;
 		};
 	};
 
-	usb1_id_pins_float: usb1_iddig {
+	usb1_id_pins_float: usb1-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>;
 			bias-pull-up;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index ed1a9d319415..f767f921bdee 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -249,10 +249,11 @@
 		#clock-cells = <1>;
 	};
 
-	infracfg: syscon@10001000 {
+	infracfg: clock-controller@10001000 {
 		compatible = "mediatek,mt2712-infracfg", "syscon";
 		reg = <0 0x10001000 0 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	pericfg: syscon@10003000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 86cedb0bf1a9..15838c1ee8cc 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -73,8 +73,9 @@
 		};
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0 0x40000000 0 0x40000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
@@ -317,8 +318,8 @@
 	/* eMMC is shared pin with parallel NAND */
 	emmc_pins_default: emmc-pins-default {
 		mux {
-			function = "emmc", "emmc_rst";
-			groups = "emmc";
+			function = "emmc";
+			groups = "emmc", "emmc_rst";
 		};
 
 		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index dad8e683aac5..0a14ef1da60d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -55,8 +55,9 @@
 		};
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0 0x40000000 0 0x20000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
@@ -243,8 +244,8 @@
 	/* eMMC is shared pin with parallel NAND */
 	emmc_pins_default: emmc-pins-default {
 		mux {
-			function = "emmc", "emmc_rst";
-			groups = "emmc";
+			function = "emmc";
+			groups = "emmc", "emmc_rst";
 		};
 
 		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 3ee9266fa8e9..917fa39a74f8 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -252,7 +252,7 @@
 		clock-names = "hif_sel";
 	};
 
-	cir: cir@10009000 {
+	cir: ir-receiver@10009000 {
 		compatible = "mediatek,mt7622-cir";
 		reg = <0 0x10009000 0 0x1000>;
 		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>;
@@ -283,16 +283,14 @@
 		};
 	};
 
-	apmixedsys: apmixedsys@10209000 {
-		compatible = "mediatek,mt7622-apmixedsys",
-			     "syscon";
+	apmixedsys: clock-controller@10209000 {
+		compatible = "mediatek,mt7622-apmixedsys";
 		reg = <0 0x10209000 0 0x1000>;
 		#clock-cells = <1>;
 	};
 
-	topckgen: topckgen@10210000 {
-		compatible = "mediatek,mt7622-topckgen",
-			     "syscon";
+	topckgen: clock-controller@10210000 {
+		compatible = "mediatek,mt7622-topckgen";
 		reg = <0 0x10210000 0 0x1000>;
 		#clock-cells = <1>;
 	};
@@ -515,7 +513,6 @@
 			 <&pericfg CLK_PERI_AUXADC_PD>;
 		clock-names = "therm", "auxadc";
 		resets = <&pericfg MT7622_PERI_THERM_SW_RST>;
-		reset-names = "therm";
 		mediatek,auxadc = <&auxadc>;
 		mediatek,apmixedsys = <&apmixedsys>;
 		nvmem-cells = <&thermal_calibration>;
@@ -734,9 +731,8 @@
 		power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
 	};
 
-	ssusbsys: ssusbsys@1a000000 {
-		compatible = "mediatek,mt7622-ssusbsys",
-			     "syscon";
+	ssusbsys: clock-controller@1a000000 {
+		compatible = "mediatek,mt7622-ssusbsys";
 		reg = <0 0x1a000000 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -793,9 +789,8 @@
 		};
 	};
 
-	pciesys: pciesys@1a100800 {
-		compatible = "mediatek,mt7622-pciesys",
-			     "syscon";
+	pciesys: clock-controller@1a100800 {
+		compatible = "mediatek,mt7622-pciesys";
 		reg = <0 0x1a100800 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -921,12 +916,13 @@
 		};
 	};
 
-	hifsys: syscon@1af00000 {
-		compatible = "mediatek,mt7622-hifsys", "syscon";
+	hifsys: clock-controller@1af00000 {
+		compatible = "mediatek,mt7622-hifsys";
 		reg = <0 0x1af00000 0 0x70>;
+		#clock-cells = <1>;
 	};
 
-	ethsys: syscon@1b000000 {
+	ethsys: clock-controller@1b000000 {
 		compatible = "mediatek,mt7622-ethsys",
 			     "syscon";
 		reg = <0 0x1b000000 0 0x1000>;
@@ -966,9 +962,7 @@
 	};
 
 	eth: ethernet@1b100000 {
-		compatible = "mediatek,mt7622-eth",
-			     "mediatek,mt2701-eth",
-			     "syscon";
+		compatible = "mediatek,mt7622-eth";
 		reg = <0 0x1b100000 0 0x20000>;
 		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index af4a4309bda4..aba6686eb34a 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -43,7 +43,7 @@
 		#cooling-cells = <2>;
 		/* cooling level (0, 1, 2) - pwm inverted */
 		cooling-levels = <255 96 0>;
-		pwms = <&pwm 0 10000 0>;
+		pwms = <&pwm 0 10000>;
 		status = "okay";
 	};
 
@@ -126,6 +126,7 @@
 		compatible = "sff,sfp";
 		i2c-bus = <&i2c_sfp1>;
 		los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
 		mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
 		tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
@@ -137,6 +138,7 @@
 		i2c-bus = <&i2c_sfp2>;
 		los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <3000>;
 		tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
 	};
@@ -144,22 +146,22 @@
 
 &cpu_thermal {
 	cooling-maps {
-		cpu-active-high {
+		map-cpu-active-high {
 			/* active: set fan to cooling level 2 */
 			cooling-device = <&fan 2 2>;
 			trip = <&cpu_trip_active_high>;
 		};
 
-		cpu-active-low {
+		map-cpu-active-med {
 			/* active: set fan to cooling level 1 */
 			cooling-device = <&fan 1 1>;
-			trip = <&cpu_trip_active_low>;
+			trip = <&cpu_trip_active_med>;
 		};
 
-		cpu-passive {
-			/* passive: set fan to cooling level 0 */
+		map-cpu-active-low {
+			/* active: set fan to cooling level 0 */
 			cooling-device = <&fan 0 0>;
-			trip = <&cpu_trip_passive>;
+			trip = <&cpu_trip_active_low>;
 		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 3ef371ca254e..2f884c24f1eb 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -237,12 +237,13 @@
 	pinctrl-0 = <&spi_flash_pins>;
 	cs-gpios = <0>, <0>;
 	status = "okay";
-	spi_nand: spi_nand@0 {
+
+	spi_nand: flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-		spi-tx-buswidth = <4>;
-		spi-rx-buswidth = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 24eda00e320d..559990dcd1d1 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -16,49 +16,49 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	clk40m: oscillator-40m {
-		compatible = "fixed-clock";
-		clock-frequency = <40000000>;
-		#clock-cells = <0>;
-		clock-output-names = "clkxtal";
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu0: cpu@0 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
-			device_type = "cpu";
-			enable-method = "psci";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 	};
 
+	clk40m: oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+		clock-output-names = "clkxtal";
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -121,38 +121,30 @@
 
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-	};
-
 	soc {
-		#address-cells = <2>;
-		#size-cells = <2>;
 		compatible = "simple-bus";
 		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
 
 		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
 			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
 			      <0 0x0c080000 0 0x80000>,  /* GICR */
 			      <0 0x0c400000 0 0x2000>,   /* GICC */
 			      <0 0x0c410000 0 0x1000>,   /* GICH */
 			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupt-parent = <&gic>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
 		};
 
 		infracfg: infracfg@10001000 {
 			compatible = "mediatek,mt7986-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		wed_pcie: wed-pcie@10003000 {
@@ -202,6 +194,19 @@
 			#interrupt-cells = <2>;
 		};
 
+		pwm: pwm@10048000 {
+			compatible = "mediatek,mt7986-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&infracfg CLK_INFRA_PWM_STA>,
+				 <&infracfg CLK_INFRA_PWM1_CK>,
+				 <&infracfg CLK_INFRA_PWM2_CK>;
+			clock-names = "top", "main", "pwm1", "pwm2";
+			status = "disabled";
+		};
+
 		sgmiisys0: syscon@10060000 {
 			compatible = "mediatek,mt7986-sgmiisys_0",
 				     "syscon";
@@ -234,26 +239,11 @@
 				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ring0", "ring1", "ring2", "ring3";
 			clocks = <&infracfg CLK_INFRA_EIP97_CK>;
-			clock-names = "infra_eip97_ck";
 			assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>;
 			status = "disabled";
 		};
 
-		pwm: pwm@10048000 {
-			compatible = "mediatek,mt7986-pwm";
-			reg = <0 0x10048000 0 0x1000>;
-			#clock-cells = <1>;
-			#pwm-cells = <2>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&topckgen CLK_TOP_PWM_SEL>,
-				 <&infracfg CLK_INFRA_PWM_STA>,
-				 <&infracfg CLK_INFRA_PWM1_CK>,
-				 <&infracfg CLK_INFRA_PWM2_CK>;
-			clock-names = "top", "main", "pwm1", "pwm2";
-			status = "disabled";
-		};
-
 		uart0: serial@11002000 {
 			compatible = "mediatek,mt7986-uart",
 				     "mediatek,mt6577-uart";
@@ -311,9 +301,9 @@
 
 		spi0: spi@1100a000 {
 			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100a000 0 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0 0x1100a000 0 0x100>;
 			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&topckgen CLK_TOP_MPLL_D2>,
 				 <&topckgen CLK_TOP_SPI_SEL>,
@@ -325,9 +315,9 @@
 
 		spi1: spi@1100b000 {
 			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100b000 0 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0 0x1100b000 0 0x100>;
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&topckgen CLK_TOP_MPLL_D2>,
 				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
@@ -337,6 +327,20 @@
 			status = "disabled";
 		};
 
+		thermal: thermal@1100c800 {
+			compatible = "mediatek,mt7986-thermal";
+			reg = <0 0x1100c800 0 0x800>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_THERM_CK>,
+				 <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "therm", "auxadc";
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+			#thermal-sensor-cells = <1>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+		};
+
 		auxadc: adc@1100d000 {
 			compatible = "mediatek,mt7986-auxadc";
 			reg = <0 0x1100d000 0 0x1000>;
@@ -374,6 +378,10 @@
 			reg = <0 0x11230000 0 0x1000>,
 			      <0 0x11c20000 0 0x1000>;
 			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			assigned-clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+					  <&topckgen CLK_TOP_EMMC_250M_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_MPLL>,
+						 <&topckgen CLK_TOP_NET1PLL_D5_D2>;
 			clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
 				 <&infracfg CLK_INFRA_MSDC_HCK_CK>,
 				 <&infracfg CLK_INFRA_MSDC_CK>,
@@ -384,39 +392,23 @@
 			status = "disabled";
 		};
 
-		thermal: thermal@1100c800 {
-			#thermal-sensor-cells = <1>;
-			compatible = "mediatek,mt7986-thermal";
-			reg = <0 0x1100c800 0 0x800>;
-			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&infracfg CLK_INFRA_THERM_CK>,
-				 <&infracfg CLK_INFRA_ADC_26M_CK>,
-				 <&infracfg CLK_INFRA_ADC_FRC_CK>;
-			clock-names = "therm", "auxadc", "adc_32k";
-			mediatek,auxadc = <&auxadc>;
-			mediatek,apmixedsys = <&apmixedsys>;
-			nvmem-cells = <&thermal_calibration>;
-			nvmem-cell-names = "calibration-data";
-		};
-
 		pcie: pcie@11280000 {
 			compatible = "mediatek,mt7986-pcie",
 				     "mediatek,mt8192-pcie";
+			reg = <0x00 0x11280000 0x00 0x4000>;
+			reg-names = "pcie-mac";
+			ranges = <0x82000000 0x00 0x20000000 0x00
+				  0x20000000 0x00 0x10000000>;
 			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			reg = <0x00 0x11280000 0x00 0x4000>;
-			reg-names = "pcie-mac";
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			bus-range = <0x00 0xff>;
-			ranges = <0x82000000 0x00 0x20000000 0x00
-				  0x20000000 0x00 0x10000000>;
 			clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
 				 <&infracfg CLK_INFRA_IPCIE_CK>,
 				 <&infracfg CLK_INFRA_IPCIER_CK>,
 				 <&infracfg CLK_INFRA_IPCIEB_CK>;
 			clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
-			status = "disabled";
 
 			phys = <&pcie_port PHY_TYPE_PCIE>;
 			phy-names = "pcie-phy";
@@ -427,6 +419,8 @@
 					<0 0 0 2 &pcie_intc 1>,
 					<0 0 0 3 &pcie_intc 2>,
 					<0 0 0 4 &pcie_intc 3>;
+			status = "disabled";
+
 			pcie_intc: interrupt-controller {
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
@@ -437,9 +431,9 @@
 		pcie_phy: t-phy {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
+			ranges;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges;
 			status = "disabled";
 
 			pcie_port: pcie-phy@11c00000 {
@@ -464,9 +458,9 @@
 		usb_phy: t-phy@11e10000 {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
+			ranges = <0 0 0x11e10000 0x1700>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0 0 0x11e10000 0x1700>;
 			status = "disabled";
 
 			u2port0: usb-phy@0 {
@@ -494,8 +488,6 @@
 		};
 
 		ethsys: syscon@15000000 {
-			 #address-cells = <1>;
-			 #size-cells = <1>;
 			 compatible = "mediatek,mt7986-ethsys",
 				      "syscon";
 			 reg = <0 0x15000000 0 0x1000>;
@@ -529,20 +521,6 @@
 			mediatek,wo-ccif = <&wo_ccif1>;
 		};
 
-		wo_ccif0: syscon@151a5000 {
-			compatible = "mediatek,mt7986-wo-ccif", "syscon";
-			reg = <0 0x151a5000 0 0x1000>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		wo_ccif1: syscon@151ad000 {
-			compatible = "mediatek,mt7986-wo-ccif", "syscon";
-			reg = <0 0x151ad000 0 0x1000>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
 		eth: ethernet@15100000 {
 			compatible = "mediatek,mt7986-eth";
 			reg = <0 0x15100000 0 0x80000>;
@@ -575,26 +553,39 @@
 					  <&topckgen CLK_TOP_SGM_325M_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
 						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			mediatek,ethsys = <&ethsys>;
 			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
 			mediatek,wed-pcie = <&wed_pcie>;
 			mediatek,wed = <&wed0>, <&wed1>;
-			#reset-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
+		wo_ccif0: syscon@151a5000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151a5000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wo_ccif1: syscon@151ad000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151ad000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		wifi: wifi@18000000 {
 			compatible = "mediatek,mt7986-wmac";
+			reg = <0 0x18000000 0 0x1000000>,
+			      <0 0x10003000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>;
 			resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
 			reset-names = "consys";
 			clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
 				 <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
 			clock-names = "mcu", "ap2conn";
-			reg = <0 0x18000000 0 0x1000000>,
-			      <0 0x10003000 0 0x1000>,
-			      <0 0x11d10000 0 0x1000>;
 			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
@@ -610,24 +601,45 @@
 			thermal-sensors = <&thermal 0>;
 
 			trips {
+				cpu_trip_crit: crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
 				cpu_trip_active_high: active-high {
 					temperature = <115000>;
 					hysteresis = <2000>;
 					type = "active";
 				};
 
-				cpu_trip_active_low: active-low {
+				cpu_trip_active_med: active-med {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "active";
 				};
 
-				cpu_trip_passive: passive {
-					temperature = <40000>;
+				cpu_trip_active_low: active-low {
+					temperature = <60000>;
 					hysteresis = <2000>;
-					type = "passive";
+					type = "active";
 				};
 			};
 		};
 	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index dde190442e38..57dcaeef31d7 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -152,12 +152,13 @@
 	pinctrl-0 = <&spi_flash_pins>;
 	cs-gpios = <0>, <0>;
 	status = "okay";
-	spi_nand: spi_nand@0 {
+
+	spi_nand: flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-		spi-tx-buswidth = <4>;
-		spi-rx-buswidth = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 5122963d8743..d258c80213b2 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -44,7 +44,7 @@
 		id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb_p1_vbus: regulator@0 {
+	usb_p1_vbus: regulator-usb-p1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -53,7 +53,7 @@
 		enable-active-high;
 	};
 
-	usb_p0_vbus: regulator@1 {
+	usb_p0_vbus: regulator-usb-p0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-evb.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index d8bd51807683..77f9ab94c00b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -31,14 +31,14 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		scp_mem_reserved: scp_mem_region {
+		scp_mem_reserved: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
 		};
 	};
 
-	ntc@0 {
+	thermal-sensor {
 		compatible = "murata,ncp03wf104";
 		pullup-uv = <1800000>;
 		pullup-ohm = <390000>;
@@ -155,8 +155,8 @@
 };
 
 &pio {
-	i2c_pins_0: i2c0{
-		pins_i2c{
+	i2c_pins_0: i2c0 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
@@ -164,8 +164,8 @@
 		};
 	};
 
-	i2c_pins_1: i2c1{
-		pins_i2c{
+	i2c_pins_1: i2c1 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
@@ -173,8 +173,8 @@
 		};
 	};
 
-	i2c_pins_2: i2c2{
-		pins_i2c{
+	i2c_pins_2: i2c2 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			mediatek,pull-up-adv = <3>;
@@ -182,8 +182,8 @@
 		};
 	};
 
-	i2c_pins_3: i2c3{
-		pins_i2c{
+	i2c_pins_3: i2c3 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
@@ -191,8 +191,8 @@
 		};
 	};
 
-	i2c_pins_4: i2c4{
-		pins_i2c{
+	i2c_pins_4: i2c4 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			mediatek,pull-up-adv = <3>;
@@ -200,8 +200,8 @@
 		};
 	};
 
-	i2c_pins_5: i2c5{
-		pins_i2c{
+	i2c_pins_5: i2c5 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
@@ -209,8 +209,8 @@
 		};
 	};
 
-	spi_pins_0: spi0{
-		pins_spi{
+	spi_pins_0: spi0 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
 				 <PINMUX_GPIO86__FUNC_SPI0_CSB>,
 				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -324,8 +324,8 @@
 		};
 	};
 
-	spi_pins_1: spi1{
-		pins_spi{
+	spi_pins_1: spi1 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
 				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
 				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -334,8 +334,8 @@
 		};
 	};
 
-	spi_pins_2: spi2{
-		pins_spi{
+	spi_pins_2: spi2 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
 				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
 				 <PINMUX_GPIO2__FUNC_SPI2_CLK>,
@@ -344,8 +344,8 @@
 		};
 	};
 
-	spi_pins_3: spi3{
-		pins_spi{
+	spi_pins_3: spi3 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
 				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
 				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -354,8 +354,8 @@
 		};
 	};
 
-	spi_pins_4: spi4{
-		pins_spi{
+	spi_pins_4: spi4 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
 				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
 				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -364,8 +364,8 @@
 		};
 	};
 
-	spi_pins_5: spi5{
-		pins_spi{
+	spi_pins_5: spi5 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
 				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
 				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
index 2c69e7658dba..b9a6fd4f86d4 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -28,7 +28,7 @@
 			dlg,btn-cfg = <50>;
 			dlg,mic-det-thr = <500>;
 			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-det-rate = "32_64";
 			dlg,jack-rem-deb = <1>;
 
 			dlg,a-d-btn-thr = <0xa>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index bf97b60ae4d1..32f6899f885e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -91,6 +91,8 @@
 
 &dsi0 {
 	status = "okay";
+	/delete-property/#size-cells;
+	/delete-property/#address-cells;
 	/delete-node/panel@0;
 	ports {
 		port {
@@ -154,21 +156,24 @@
 		vdd18-supply = <&pp1800_mipibrdg>;
 		vdd33-supply = <&vddio_mipibrdg>;
 
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-			anx7625_in: endpoint {
-				remote-endpoint = <&dsi_out>;
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
+			port@1 {
+				reg = <1>;
 
-			anx7625_out: endpoint {
-				remote-endpoint = <&panel_in>;
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
 			};
 		};
 
@@ -441,20 +446,20 @@
 	};
 
 	touchscreen_pins: touchscreen-pins {
-		touch_int_odl {
+		touch-int-odl {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		touch_rst_l {
+		touch-rst-l {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 			output-high;
 		};
 	};
 
 	trackpad_pins: trackpad-pins {
-		trackpad_int {
+		trackpad-int {
 			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
 			input-enable;
 			bias-disable; /* pulled externally */
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index a06734bfaddb..ed5dbef7400e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -373,6 +373,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index 4864c39e53a4..e73113cb51f5 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -340,6 +340,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index ffb2a44e0f41..d6fa93f1a240 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -344,6 +344,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 60e979a73361..d841eb01c48c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -108,7 +108,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		scp_mem_reserved: scp_mem_region {
+		scp_mem_reserved: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
@@ -405,7 +405,6 @@
 };
 
 &mt6358_vgpu_reg {
-	regulator-min-microvolt = <625000>;
 	regulator-max-microvolt = <900000>;
 
 	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
@@ -432,7 +431,7 @@
 
 &pio {
 	aud_pins_default: audiopins {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO97__FUNC_I2S2_MCK>,
 				<PINMUX_GPIO98__FUNC_I2S2_BCK>,
 				<PINMUX_GPIO101__FUNC_I2S2_LRCK>,
@@ -454,7 +453,7 @@
 	};
 
 	aud_pins_tdm_out_on: audiotdmouton {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_TDM_BCK_2ND>,
 				<PINMUX_GPIO170__FUNC_TDM_LRCK_2ND>,
 				<PINMUX_GPIO171__FUNC_TDM_DATA0_2ND>,
@@ -466,7 +465,7 @@
 	};
 
 	aud_pins_tdm_out_off: audiotdmoutoff {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_GPIO169>,
 				<PINMUX_GPIO170__FUNC_GPIO170>,
 				<PINMUX_GPIO171__FUNC_GPIO171>,
@@ -480,13 +479,13 @@
 	};
 
 	bt_pins: bt-pins {
-		pins_bt_en {
+		pins-bt-en {
 			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
 			output-low;
 		};
 	};
 
-	ec_ap_int_odl: ec_ap_int_odl {
+	ec_ap_int_odl: ec-ap-int-odl {
 		pins1 {
 			pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
 			input-enable;
@@ -494,7 +493,7 @@
 		};
 	};
 
-	h1_int_od_l: h1_int_od_l {
+	h1_int_od_l: h1-int-od-l {
 		pins1 {
 			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
 			input-enable;
@@ -502,7 +501,7 @@
 	};
 
 	i2c0_pins: i2c0 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
@@ -511,7 +510,7 @@
 	};
 
 	i2c1_pins: i2c1 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
@@ -520,7 +519,7 @@
 	};
 
 	i2c2_pins: i2c2 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			bias-disable;
@@ -529,7 +528,7 @@
 	};
 
 	i2c3_pins: i2c3 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
@@ -538,7 +537,7 @@
 	};
 
 	i2c4_pins: i2c4 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			bias-disable;
@@ -547,7 +546,7 @@
 	};
 
 	i2c5_pins: i2c5 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
@@ -556,7 +555,7 @@
 	};
 
 	i2c6_pins: i2c6 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
 				 <PINMUX_GPIO12__FUNC_SDA6>;
 			bias-disable;
@@ -564,7 +563,7 @@
 	};
 
 	mmc0_pins_default: mmc0-pins-default {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
@@ -579,13 +578,13 @@
 			mediatek,pull-up-adv = <01>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <10>;
 		};
 
-		pins_rst {
+		pins-rst {
 			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <01>;
@@ -593,7 +592,7 @@
 	};
 
 	mmc0_pins_uhs: mmc0-pins-uhs {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
@@ -608,19 +607,19 @@
 			mediatek,pull-up-adv = <01>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <10>;
 		};
 
-		pins_ds {
+		pins-ds {
 			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <10>;
 		};
 
-		pins_rst {
+		pins-rst {
 			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-up-adv = <01>;
@@ -628,7 +627,7 @@
 	};
 
 	mmc1_pins_default: mmc1-pins-default {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
@@ -638,7 +637,7 @@
 			mediatek,pull-up-adv = <10>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			input-enable;
 			mediatek,pull-down-adv = <10>;
@@ -646,7 +645,7 @@
 	};
 
 	mmc1_pins_uhs: mmc1-pins-uhs {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
@@ -657,7 +656,7 @@
 			mediatek,pull-up-adv = <10>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			drive-strength = <MTK_DRIVE_8mA>;
 			mediatek,pull-down-adv = <10>;
@@ -665,15 +664,15 @@
 		};
 	};
 
-	panel_pins_default: panel_pins_default {
-		panel_reset {
+	panel_pins_default: panel-pins-default {
+		panel-reset {
 			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
 			output-low;
 			bias-pull-up;
 		};
 	};
 
-	pwm0_pin_default: pwm0_pin_default {
+	pwm0_pin_default: pwm0-pin-default {
 		pins1 {
 			pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
 			output-high;
@@ -685,14 +684,14 @@
 	};
 
 	scp_pins: scp {
-		pins_scp_uart {
+		pins-scp-uart {
 			pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
 				 <PINMUX_GPIO112__FUNC_TP_UTXD1_AO>;
 		};
 	};
 
 	spi0_pins: spi0 {
-		pins_spi{
+		pins-spi {
 			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
 				 <PINMUX_GPIO86__FUNC_GPIO86>,
 				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -702,7 +701,7 @@
 	};
 
 	spi1_pins: spi1 {
-		pins_spi{
+		pins-spi {
 			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
 				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
 				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -712,20 +711,20 @@
 	};
 
 	spi2_pins: spi2 {
-		pins_spi{
+		pins-spi {
 			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
 				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
 				 <PINMUX_GPIO2__FUNC_SPI2_CLK>;
 			bias-disable;
 		};
-		pins_spi_mi {
+		pins-spi-mi {
 			pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
 			mediatek,pull-down-adv = <00>;
 		};
 	};
 
 	spi3_pins: spi3 {
-		pins_spi{
+		pins-spi {
 			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
 				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
 				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -735,7 +734,7 @@
 	};
 
 	spi4_pins: spi4 {
-		pins_spi{
+		pins-spi {
 			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
 				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
 				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -745,7 +744,7 @@
 	};
 
 	spi5_pins: spi5 {
-		pins_spi{
+		pins-spi {
 			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
 				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
 				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
@@ -755,63 +754,61 @@
 	};
 
 	uart0_pins_default: uart0-pins-default {
-		pins_rx {
+		pins-rx {
 			pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO96__FUNC_UTXD0>;
 		};
 	};
 
 	uart1_pins_default: uart1-pins-default {
-		pins_rx {
+		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
 		};
-		pins_rts {
+		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
-		pins_cts {
+		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
 			input-enable;
 		};
 	};
 
 	uart1_pins_sleep: uart1-pins-sleep {
-		pins_rx {
+		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
 		};
-		pins_rts {
+		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
-		pins_cts {
+		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
 			input-enable;
 		};
 	};
 
 	wifi_pins_pwrseq: wifi-pins-pwrseq {
-		pins_wifi_enable {
+		pins-wifi-enable {
 			pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
 			output-low;
 		};
 	};
 
 	wifi_pins_wakeup: wifi-pins-wakeup {
-		pins_wifi_wakeup {
+		pins-wifi-wakeup {
 			pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
 			input-enable;
 		};
@@ -907,10 +904,6 @@
 			google,usb-port-id = <0>;
 		};
 
-		cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		typec {
 			compatible = "google,cros-ec-typec";
 			#address-cells = <1>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index 526bcae7a3f8..b5784a60c315 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -193,7 +193,7 @@
 
 &pio {
 	i2c_pins_0: i2c0 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
@@ -202,7 +202,7 @@
 	};
 
 	i2c_pins_1: i2c1 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
@@ -211,7 +211,7 @@
 	};
 
 	i2c_pins_2: i2c2 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			mediatek,pull-up-adv = <3>;
@@ -220,7 +220,7 @@
 	};
 
 	i2c_pins_3: i2c3 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
@@ -229,7 +229,7 @@
 	};
 
 	i2c_pins_4: i2c4 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			mediatek,pull-up-adv = <3>;
@@ -238,7 +238,7 @@
 	};
 
 	i2c_pins_5: i2c5 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 5169779d01df..8721a5ffca30 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1210,127 +1210,6 @@
 			nvmem-cell-names = "calibration-data";
 		};
 
-		thermal_zones: thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <100>;
-				polling-delay = <500>;
-				thermal-sensors = <&thermal 0>;
-				sustainable-power = <5000>;
-
-				trips {
-					threshold: trip-point0 {
-						temperature = <68000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					target: trip-point1 {
-						temperature = <80000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					cpu_crit: cpu-crit {
-						temperature = <115000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&target>;
-						cooling-device = <&cpu0
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu1
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu2
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu3
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-						contribution = <3072>;
-					};
-					map1 {
-						trip = <&target>;
-						cooling-device = <&cpu4
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu5
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu6
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu7
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-						contribution = <1024>;
-					};
-				};
-			};
-
-			/* The tzts1 ~ tzts6 don't need to polling */
-			/* The tzts1 ~ tzts6 don't need to thermal throttle */
-
-			tzts1: tzts1 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 1>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts2: tzts2 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 2>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts3: tzts3 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 3>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts4: tzts4 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 4>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts5: tzts5 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 5>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tztsABB: tztsABB {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 6>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-		};
-
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1749,6 +1628,7 @@
 			compatible = "mediatek,mt8183-mfgcfg", "syscon";
 			reg = <0 0x13000000 0 0x1000>;
 			#clock-cells = <1>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_MFG_ASYNC>;
 		};
 
 		gpu: gpu@13040000 {
@@ -1781,7 +1661,7 @@
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
 		};
 
-		mdp3-rdma0@14001000 {
+		dma-controller0@14001000 {
 			compatible = "mediatek,mt8183-mdp3-rdma";
 			reg = <0 0x14001000 0 0x1000>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
@@ -1793,6 +1673,7 @@
 			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
 			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
 				 <&gce 21 CMDQ_THR_PRIO_LOWEST 0>;
+			#dma-cells = <1>;
 		};
 
 		mdp3-rsz0@14003000 {
@@ -1813,7 +1694,7 @@
 			clocks = <&mmsys CLK_MM_MDP_RSZ1>;
 		};
 
-		mdp3-wrot0@14005000 {
+		dma-controller@14005000 {
 			compatible = "mediatek,mt8183-mdp3-wrot";
 			reg = <0 0x14005000 0 0x1000>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
@@ -1822,6 +1703,7 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_MDP_WROT0>;
 			iommus = <&iommu M4U_PORT_MDP_WROT0>;
+			#dma-cells = <1>;
 		};
 
 		mdp3-wdma@14006000 {
@@ -2105,4 +1987,125 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_CAM>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <500>;
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <5000>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point1 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu1
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu2
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu3
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <3072>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&cpu4
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu5
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu6
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu7
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <1024>;
+				};
+			};
+		};
+
+		/* The tzts1 ~ tzts6 don't need to polling */
+		/* The tzts1 ~ tzts6 don't need to thermal throttle */
+
+		tzts1: tzts1 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 1>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts2: tzts2 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 2>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts3: tzts3 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 3>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts4: tzts4 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 4>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts5: tzts5 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 5>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tztsABB: tztsABB {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 6>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index f04ae70c470a..84ec6c1aa12b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -22,7 +22,7 @@
 
 	aliases {
 		ovl0 = &ovl0;
-		ovl_2l0 = &ovl_2l0;
+		ovl-2l0 = &ovl_2l0;
 		rdma0 = &rdma0;
 		rdma1 = &rdma1;
 	};
@@ -924,17 +924,24 @@
 					reg = <MT8186_POWER_DOMAIN_CSIRX_TOP>;
 					clocks = <&topckgen CLK_TOP_SENINF>,
 						 <&topckgen CLK_TOP_SENINF1>;
-					clock-names = "csirx_top0", "csirx_top1";
+					clock-names = "subsys-csirx-top0",
+						      "subsys-csirx-top1";
 					#power-domain-cells = <0>;
 				};
 
 				power-domain@MT8186_POWER_DOMAIN_SSUSB {
 					reg = <MT8186_POWER_DOMAIN_SSUSB>;
+					clocks = <&topckgen CLK_TOP_USB_TOP>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>;
+					clock-names = "sys_ck", "ref_ck";
 					#power-domain-cells = <0>;
 				};
 
 				power-domain@MT8186_POWER_DOMAIN_SSUSB_P1 {
 					reg = <MT8186_POWER_DOMAIN_SSUSB_P1>;
+					clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>;
+					clock-names = "sys_ck", "ref_ck";
 					#power-domain-cells = <0>;
 				};
 
@@ -942,7 +949,8 @@
 					reg = <MT8186_POWER_DOMAIN_ADSP_AO>;
 					clocks = <&topckgen CLK_TOP_AUDIODSP>,
 						 <&topckgen CLK_TOP_ADSP_BUS>;
-					clock-names = "audioadsp", "adsp_bus";
+					clock-names = "audioadsp",
+						      "subsys-adsp-bus";
 					#address-cells = <1>;
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
@@ -975,8 +983,11 @@
 						 <&mmsys CLK_MM_SMI_COMMON>,
 						 <&mmsys CLK_MM_SMI_GALS>,
 						 <&mmsys CLK_MM_SMI_IOMMU>;
-					clock-names = "disp", "mdp", "smi_infra", "smi_common",
-						     "smi_gals", "smi_iommu";
+					clock-names = "disp", "mdp",
+						      "subsys-smi-infra",
+						      "subsys-smi-common",
+						      "subsys-smi-gals",
+						      "subsys-smi-iommu";
 					mediatek,infracfg = <&infracfg_ao>;
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -993,15 +1004,17 @@
 
 					power-domain@MT8186_POWER_DOMAIN_CAM {
 						reg = <MT8186_POWER_DOMAIN_CAM>;
-						clocks = <&topckgen CLK_TOP_CAM>,
-							 <&topckgen CLK_TOP_SENINF>,
+						clocks = <&topckgen CLK_TOP_SENINF>,
 							 <&topckgen CLK_TOP_SENINF1>,
 							 <&topckgen CLK_TOP_SENINF2>,
 							 <&topckgen CLK_TOP_SENINF3>,
+							 <&camsys CLK_CAM2MM_GALS>,
 							 <&topckgen CLK_TOP_CAMTM>,
-							 <&camsys CLK_CAM2MM_GALS>;
-						clock-names = "cam-top", "cam0", "cam1", "cam2",
-							     "cam3", "cam-tm", "gals";
+							 <&topckgen CLK_TOP_CAM>;
+						clock-names = "cam0", "cam1", "cam2",
+							      "cam3", "gals",
+							      "subsys-cam-tm",
+							      "subsys-cam-top";
 						mediatek,infracfg = <&infracfg_ao>;
 						#address-cells = <1>;
 						#size-cells = <0>;
@@ -1020,9 +1033,9 @@
 
 					power-domain@MT8186_POWER_DOMAIN_IMG {
 						reg = <MT8186_POWER_DOMAIN_IMG>;
-						clocks = <&topckgen CLK_TOP_IMG1>,
-							 <&imgsys1 CLK_IMG1_GALS_IMG1>;
-						clock-names = "img-top", "gals";
+						clocks = <&imgsys1 CLK_IMG1_GALS_IMG1>,
+							 <&topckgen CLK_TOP_IMG1>;
+						clock-names = "gals", "subsys-img-top";
 						mediatek,infracfg = <&infracfg_ao>;
 						#address-cells = <1>;
 						#size-cells = <0>;
@@ -1041,8 +1054,11 @@
 							 <&ipesys CLK_IPE_LARB20>,
 							 <&ipesys CLK_IPE_SMI_SUBCOM>,
 							 <&ipesys CLK_IPE_GALS_IPE>;
-						clock-names = "ipe-top", "ipe-larb0", "ipe-larb1",
-							      "ipe-smi", "ipe-gals";
+						clock-names = "subsys-ipe-top",
+							      "subsys-ipe-larb0",
+							      "subsys-ipe-larb1",
+							      "subsys-ipe-smi",
+							      "subsys-ipe-gals";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
@@ -1051,7 +1067,7 @@
 						reg = <MT8186_POWER_DOMAIN_VENC>;
 						clocks = <&topckgen CLK_TOP_VENC>,
 							 <&vencsys CLK_VENC_CKE1_VENC>;
-						clock-names = "venc0", "larb";
+						clock-names = "venc0", "subsys-larb";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
@@ -1061,7 +1077,9 @@
 						clocks = <&topckgen CLK_TOP_WPE>,
 							 <&wpesys CLK_WPE_SMI_LARB8_CK_EN>,
 							 <&wpesys CLK_WPE_SMI_LARB8_PCLK_EN>;
-						clock-names = "wpe0", "larb-ck", "larb-pclk";
+						clock-names = "wpe0",
+							      "subsys-larb-ck",
+							      "subsys-larb-pclk";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
@@ -1148,14 +1166,14 @@
 			status = "disabled";
 		};
 
-		adsp_mailbox0: mailbox@10686000 {
+		adsp_mailbox0: mailbox@10686100 {
 			compatible = "mediatek,mt8186-adsp-mbox";
 			#mbox-cells = <0>;
 			reg = <0 0x10686100 0 0x1000>;
 			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
-		adsp_mailbox1: mailbox@10687000 {
+		adsp_mailbox1: mailbox@10687100 {
 			compatible = "mediatek,mt8186-adsp-mbox";
 			#mbox-cells = <0>;
 			reg = <0 0x10687100 0 0x1000>;
@@ -1518,8 +1536,9 @@
 			clocks = <&topckgen CLK_TOP_USB_TOP>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
-				 <&infracfg_ao CLK_INFRA_AO_ICUSB>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+				 <&infracfg_ao CLK_INFRA_AO_ICUSB>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&u2port0 PHY_TYPE_USB2>;
 			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB>;
@@ -1583,8 +1602,9 @@
 			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>,
-				 <&clk26m>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
 			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB_P1>;
@@ -1656,7 +1676,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			gpu_speedbin: gpu-speed-bin@59c {
+			gpu_speedbin: gpu-speedbin@59c {
 				reg = <0x59c 0x4>;
 				bits = <0 3>;
 			};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index d4a8a8d0c2f8..bde8b7e223f4 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -147,6 +147,7 @@
 		regulator-boot-on;
 		gpio = <&pio 127 GPIO_ACTIVE_HIGH>;
 		vin-supply = <&pp3300_g>;
+		off-on-delay-us = <500000>;
 	};
 
 	/* separately switched 3.3V power rail */
@@ -1308,10 +1309,6 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		base_detection: cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
 			#pwm-cells = <1>;
@@ -1396,7 +1393,7 @@
 			mt6315_6_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
@@ -1406,7 +1403,7 @@
 			mt6315_6_vbuck3: vbuck3 {
 				regulator-compatible = "vbuck3";
 				regulator-name = "Vlcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
@@ -1423,7 +1420,7 @@
 			mt6315_7_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
-				regulator-min-microvolt = <606250>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <800000>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 69f4cded5dbb..b1443adc55aa 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -1412,6 +1412,7 @@
 			reg = <0 0x14001000 0 0x1000>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
 					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
@@ -1770,7 +1771,7 @@
 			mediatek,scp = <&scp>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
 			clocks = <&vencsys CLK_VENC_SET1_VENC>;
-			clock-names = "venc-set1";
+			clock-names = "venc_sel";
 			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
 			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
 		};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
index 2d5e8f371b6d..a82d716f10d4 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
@@ -23,3 +23,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
index 2586c32ce6e6..2fe20e0dad83 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -43,3 +43,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
index f54f9477b99d..dd294ca98194 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
@@ -44,3 +44,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index 21e33b9aa075..1b0b67a8fb26 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -114,6 +114,77 @@
 		regulator-boot-on;
 	};
 
+	/* Murata NCP03WF104F05RL */
+	tboard_thermistor1: thermal-sensor-t1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
+	tboard_thermistor2: thermal-sensor-t2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
 	usb_vbus: regulator-5v0-usb-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb-vbus";
@@ -176,6 +247,42 @@
 	memory-region = <&afe_mem>;
 };
 
+&auxadc {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu2 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu3 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu5 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu6 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu7 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
 &dp_intf0 {
 	status = "okay";
 
@@ -362,7 +469,7 @@
 	pinctrl-0 = <&i2c7_pins>;
 
 	pmic@34 {
-		#interrupt-cells = <1>;
+		#interrupt-cells = <2>;
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
@@ -1098,7 +1205,7 @@
 			mt6315_6_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-ramp-delay = <6250>;
@@ -1116,7 +1223,7 @@
 			mt6315_7_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
-				regulator-min-microvolt = <625000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-ramp-delay = <6250>;
@@ -1127,6 +1234,36 @@
 	};
 };
 
+&thermal_zones {
+	soc-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&tboard_thermistor1>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pmic-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <0>;
+		thermal-sensors = <&tboard_thermistor2>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
 &u3phy0 {
 	status = "okay";
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 5d635085fe3f..9079e48aea23 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -128,6 +128,7 @@
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
+		#interrupt-cells = <1>;
 		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "IRQB";
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 54c674c45b49..20e6d90cc411 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -627,6 +627,8 @@
 
 					power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
 						reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
+						clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
+						clock-names = "venc1-larb";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
@@ -689,6 +691,8 @@
 
 						power-domain@MT8195_POWER_DOMAIN_VENC {
 							reg = <MT8195_POWER_DOMAIN_VENC>;
+							clocks = <&vencsys CLK_VENC_LARB>;
+							clock-names = "venc0-larb";
 							mediatek,infracfg = <&infracfg_ao>;
 							#power-domain-cells = <0>;
 						};
@@ -1959,6 +1963,7 @@
 			compatible = "mediatek,mt8195-vppsys0", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0 0x1000>;
 		};
 
 		mutex@1400f000 {
@@ -2073,6 +2078,7 @@
 			compatible = "mediatek,mt8195-vppsys1", "syscon";
 			reg = <0 0x14f00000 0 0x1000>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0 0x1000>;
 		};
 
 		mutex@14f01000 {
@@ -2619,6 +2625,7 @@
 			reg = <0 0x1c01a000 0 0x1000>;
 			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xa000 0x1000>;
 		};
 
 
@@ -2665,7 +2672,7 @@
 			reg = <0 0x1b010000 0 0x1000>;
 			mediatek,larb-id = <20>;
 			mediatek,smi = <&smi_common_vpp>;
-			clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>,
+			clocks = <&vencsys_core1 CLK_VENC_CORE1_VENC>,
 				 <&vencsys_core1 CLK_VENC_CORE1_GALS>,
 				 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
 			clock-names = "apb", "smi", "gals";
@@ -2772,6 +2779,7 @@
 			interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x6000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>;
 		};
 
@@ -2842,6 +2850,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
 			clock-names = "vdo1_mutex";
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
 		};
 
@@ -2869,7 +2878,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 		};
 
-		vdo1_rdma0: rdma@1c104000 {
+		vdo1_rdma0: dma-controller@1c104000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c104000 0 0x1000>;
 			interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2877,9 +2886,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma1: rdma@1c105000 {
+		vdo1_rdma1: dma-controller@1c105000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c105000 0 0x1000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2887,9 +2897,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma2: rdma@1c106000 {
+		vdo1_rdma2: dma-controller@1c106000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c106000 0 0x1000>;
 			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2897,9 +2908,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma3: rdma@1c107000 {
+		vdo1_rdma3: dma-controller@1c107000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c107000 0 0x1000>;
 			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2907,9 +2919,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma4: rdma@1c108000 {
+		vdo1_rdma4: dma-controller@1c108000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c108000 0 0x1000>;
 			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2917,9 +2930,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma5: rdma@1c109000 {
+		vdo1_rdma5: dma-controller@1c109000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c109000 0 0x1000>;
 			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2927,9 +2941,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma6: rdma@1c10a000 {
+		vdo1_rdma6: dma-controller@1c10a000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c10a000 0 0x1000>;
 			interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2937,9 +2952,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma7: rdma@1c10b000 {
+		vdo1_rdma7: dma-controller@1c10b000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c10b000 0 0x1000>;
 			interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2947,6 +2963,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+			#dma-cells = <1>;
 		};
 
 		merge1: vpp-merge@1c10c000 {
@@ -3378,7 +3395,7 @@
 			};
 		};
 
-		gpu0-thermal {
+		gpu-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <250>;
 			thermal-sensors = <&lvts_ap MT8195_AP_GPU0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
index bbc2e9bef08d..441216eda487 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -9,8 +9,8 @@
 	compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@7000d000/as3722@40";
-		rtc1 = "/rtc@7000e000";
+		rtc0 = &as3722;
+		rtc1 = &tegra_rtc;
 		serial0 = &uarta;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra132.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 8b78be8f4f9d..4b5435f58323 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -570,7 +570,7 @@
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
+	tegra_rtc: rtc@7000e000 {
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
 		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 4413a9b6da87..bf2ccc8ff93c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -174,7 +174,7 @@
 			status = "okay";
 
 			phy-handle = <&mgbe0_phy>;
-			phy-mode = "usxgmii";
+			phy-mode = "10gbase-r";
 
 			mdio {
 				#address-cells = <1>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
index 5f592f1d81e2..fe08e131b7b9 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
@@ -28,7 +28,7 @@
 			flash@0 {
 				compatible = "jedec,spi-nor";
 				reg = <0>;
-				spi-max-frequency = <136000000>;
+				spi-max-frequency = <102000000>;
 				spi-tx-bus-width = <4>;
 				spi-rx-bus-width = <4>;
 			};
@@ -42,7 +42,7 @@
 		mmc@3400000 {
 			status = "okay";
 			bus-width = <4>;
-			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
 			disable-wp;
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 95524e5bce82..ac69eacf8a6b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -43,12 +43,12 @@
 				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
 			status = "okay";
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 1b66b29be6a7..eeacdca02c0a 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -172,6 +172,9 @@
 		pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
 
 		avdd-supply = <&pm8916_l6>;
+		a2vdd-supply = <&pm8916_l6>;
+		dvdd-supply = <&pm8916_l6>;
+		pvdd-supply = <&pm8916_l6>;
 		v1p2-supply = <&pm8916_l6>;
 		v3p3-supply = <&pm8916_l17>;
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 8bfc2db44624..e40c55adff23 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -135,7 +135,7 @@
 			reg = <0x0 0x4a800000 0x0 0x100000>;
 			no-map;
 
-			hwlocks = <&tcsr_mutex 0>;
+			hwlocks = <&tcsr_mutex 3>;
 		};
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 47b8b1d6730a..fea16f3271c0 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -211,7 +211,7 @@
 	smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_region>;
-		hwlocks = <&tcsr_mutex 0>;
+		hwlocks = <&tcsr_mutex 3>;
 	};
 
 	soc: soc@0 {
@@ -393,7 +393,7 @@
 
 		tcsr_mutex: hwlock@1905000 {
 			compatible = "qcom,ipq6018-tcsr-mutex", "qcom,tcsr-mutex";
-			reg = <0x0 0x01905000 0x0 0x1000>;
+			reg = <0x0 0x01905000 0x0 0x20000>;
 			#hwlock-cells = <1>;
 		};
 
@@ -565,7 +565,7 @@
 					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 			assigned-clock-rates = <133330000>,
 					       <133330000>,
-					       <20000000>;
+					       <24000000>;
 
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
@@ -579,6 +579,7 @@
 				clocks = <&xo>;
 				clock-names = "ref";
 				tx-fifo-resize;
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -767,10 +768,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 00ed71936b47..e5993a365870 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -101,7 +101,7 @@
 			reg = <0x0 0x4ab00000 0x0 0x100000>;
 			no-map;
 
-			hwlocks = <&tcsr_mutex 0>;
+			hwlocks = <&tcsr_mutex 3>;
 		};
 
 		memory@4ac00000 {
@@ -641,6 +641,7 @@
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&qusb_phy_0>, <&usb0_ssphy>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -683,6 +684,7 @@
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&qusb_phy_1>, <&usb1_ssphy>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -817,13 +819,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142
+			interrupt-map = <0 0 0 1 &intc 0 0 142
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143
+					<0 0 0 2 &intc 0 0 143
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144
+					<0 0 0 3 &intc 0 0 144
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145
+					<0 0 0 4 &intc 0 0 145
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -879,13 +881,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75
+			interrupt-map = <0 0 0 1 &intc 0 0 75
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78
+					<0 0 0 2 &intc 0 0 78
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79
+					<0 0 0 3 &intc 0 0 79
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83
+					<0 0 0 4 &intc 0 0 83
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 51aba071c1eb..8a72ad4afd03 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -195,7 +195,7 @@
 		smem@4aa00000 {
 			compatible = "qcom,smem";
 			reg = <0x0 0x4aa00000 0x0 0x100000>;
-			hwlocks = <&tcsr_mutex 0>;
+			hwlocks = <&tcsr_mutex 3>;
 			no-map;
 		};
 	};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index e6b6738421c1..10abd091c51b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -88,6 +88,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
 
 		led@0 {
 			reg = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index 8e238976ab1c..43078b890d86 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -118,6 +118,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l16>;
+		vio-supply = <&pm8916_l5>;
 
 		led@0 {
 			reg = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 33fb65d73104..961ceb83a91f 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1813,7 +1813,7 @@
 			#size-cells = <1>;
 			#iommu-cells = <1>;
 			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
-			ranges = <0 0x01e20000 0x40000>;
+			ranges = <0 0x01e20000 0x20000>;
 			reg = <0x01ef0000 0x3000>;
 			clocks = <&gcc GCC_SMMU_CFG_CLK>,
 				 <&gcc GCC_APSS_TCU_CLK>;
@@ -2085,6 +2085,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 6e24f0f2374f..3fd64cafe99c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -1447,7 +1447,7 @@
 		apps_iommu: iommu@1ef0000 {
 			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
 			reg = <0x01ef0000 0x3000>;
-			ranges = <0 0x01e20000 0x40000>;
+			ranges = <0 0x01e20000 0x20000>;
 			clocks = <&gcc GCC_SMMU_CFG_CLK>,
 				 <&gcc GCC_APSS_TCU_CLK>;
 			clock-names = "iface", "bus";
@@ -1661,6 +1661,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
index ed95d09cedb1..6b9245cd8b0c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
@@ -111,6 +111,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
index 61ff629c9bf3..9ac4f507e321 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
@@ -104,6 +104,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
index 1a1d3f92a511..b0588f30f8f1 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
@@ -113,6 +113,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi
index f9f5afbcc52b..4c5be22b47fe 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -379,7 +379,7 @@
 	smp2p-modem {
 		compatible = "qcom,smp2p";
 		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
-		qcom,ipc = <&apcs 8 13>;
+		qcom,ipc = <&apcs 8 14>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <1>;
@@ -402,7 +402,7 @@
 	smp2p-wcnss {
 		compatible = "qcom,smp2p";
 		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
-		qcom,ipc = <&apcs 8 17>;
+		qcom,ipc = <&apcs 8 18>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <4>;
@@ -428,9 +428,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		qcom,ipc-1 = <&apcs 8 12>;
+		qcom,ipc-1 = <&apcs 8 13>;
 		qcom,ipc-2 = <&apcs 8 9>;
-		qcom,ipc-3 = <&apcs 8 18>;
+		qcom,ipc-3 = <&apcs 8 19>;
 
 		apps_smsm: apps@0 {
 			reg = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
index fcca1ba94da6..5fe5de9ceef9 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -109,11 +109,6 @@
 			qcom,client-id = <1>;
 		};
 
-		audio_mem: audio@cb400000 {
-			reg = <0 0xcb000000 0 0x400000>;
-			no-mem;
-		};
-
 		qseecom_mem: qseecom@cb400000 {
 			reg = <0 0xcb400000 0 0x1c00000>;
 			no-mem;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 06f8ff624181..d5b35ff0175c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -405,7 +405,6 @@
 
 &hsusb_phy1 {
 	status = "okay";
-	extcon = <&typec>;
 
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
index c8e0986425ab..1f7cbb35886d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -443,6 +443,19 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	etm {
+		compatible = "qcom,coresight-remote-etm";
+
+		out-ports {
+			port {
+				modem_etm_out_funnel_in2: endpoint {
+					remote-endpoint =
+					  <&funnel_in2_in_modem_etm>;
+				};
+			};
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -2077,7 +2090,7 @@
 				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
 			freq-table-hz =
 				<100000000 200000000>,
-				<0 0>,
+				<100000000 200000000>,
 				<0 0>,
 				<0 0>,
 				<0 0>,
@@ -2643,6 +2656,14 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
+			in-ports {
+				port {
+					funnel_in2_in_modem_etm: endpoint {
+						remote-endpoint =
+						  <&modem_etm_out_funnel_in2>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
@@ -3061,6 +3082,7 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,is-utmi-l1-suspend;
+				snps,parkmode-disable-ss-quirk;
 				tx-fifo-resize;
 			};
 		};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f180047cacb0..7fcc15b6946a 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1588,7 +1588,6 @@
 			 * SoC VDDMX RPM Power Domain in the Adreno driver.
 			 */
 			power-domains = <&gpucc GPU_GX_GDSC>;
-			status = "disabled";
 		};
 
 		gpucc: clock-controller@5065000 {
@@ -2034,9 +2033,11 @@
 
 			cpu = <&CPU4>;
 
-			port {
-				etm4_out: endpoint {
-					remote-endpoint = <&apss_funnel_in4>;
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
 				};
 			};
 		};
@@ -2051,9 +2052,11 @@
 
 			cpu = <&CPU5>;
 
-			port {
-				etm5_out: endpoint {
-					remote-endpoint = <&apss_funnel_in5>;
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
 				};
 			};
 		};
@@ -2068,9 +2071,11 @@
 
 			cpu = <&CPU6>;
 
-			port {
-				etm6_out: endpoint {
-					remote-endpoint = <&apss_funnel_in6>;
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
 				};
 			};
 		};
@@ -2085,9 +2090,11 @@
 
 			cpu = <&CPU7>;
 
-			port {
-				etm7_out: endpoint {
-					remote-endpoint = <&apss_funnel_in7>;
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
 				};
 			};
 		};
@@ -2152,7 +2159,8 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&qusb2phy>, <&usb1_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -2161,33 +2169,26 @@
 
 		usb3phy: phy@c010000 {
 			compatible = "qcom,msm8998-qmp-usb3-phy";
-			reg = <0x0c010000 0x18c>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x0c010000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@c010200 {
-				reg = <0xc010200 0x128>,
-				      <0xc010400 0x200>,
-				      <0xc010c00 0x20c>,
-				      <0xc010600 0x128>,
-				      <0xc010800 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb2phy: phy@c012000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index d46e591e72b5..40a8506553ef 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -418,6 +418,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs: syscon@3c0000 {
+			compatible = "qcom,qcm2290-tcsr", "syscon";
+			reg = <0x0 0x003c0000 0x0 0x40000>;
+		};
+
 		tlmm: pinctrl@500000 {
 			compatible = "qcom,qcm2290-tlmm";
 			reg = <0x0 0x00500000 0x0 0x300000>;
@@ -665,6 +670,8 @@
 
 			#phy-cells = <0>;
 
+			qcom,tcsr-reg = <&tcsr_regs 0xb244>;
+
 			status = "disabled";
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 10655401528e..a22b4501ce1e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -62,7 +62,7 @@
 		vddrf-supply = <&vreg_l1_1p3>;
 		vddch0-supply = <&vdd_ch0_3p3>;
 
-		local-bd-address = [ 02 00 00 00 5a ad ];
+		local-bd-address = [ 00 00 00 00 00 00 ];
 
 		max-speed = <3200000>;
 	};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 1c0e5d271e91..dbdc06be6260 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -1452,7 +1452,21 @@
 				    "llcc_broadcast_base",
 				    "multi_channel_register";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-			multi-ch-bit-off = <24 2>;
+
+			nvmem-cells = <&multi_chan_ddr>;
+			nvmem-cell-names = "multi-chan-ddr";
+		};
+
+		sec_qfprom: efuse@221c8000 {
+			compatible = "qcom,qdu1000-sec-qfprom", "qcom,sec-qfprom";
+			reg = <0 0x221c8000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			multi_chan_ddr: multi-chan-ddr@12b {
+				reg = <0x12b 0x1>;
+				bits = <0 2>;
+			};
 		};
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index eadba066972e..37abb83ea464 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -13,7 +13,7 @@
 	compatible = "qcom,qrb2210-rb1", "qcom,qrb2210", "qcom,qcm2290";
 
 	aliases {
-		serial0 = &uart0;
+		serial0 = &uart4;
 		sdhc1 = &sdhc_1;
 		sdhc2 = &sdhc_2;
 	};
@@ -150,15 +150,15 @@
 
 		pm2250_s3: s3 {
 			/* 0.4V-1.6625V -> 1.3V (Power tree requirements) */
-			regulator-min-microvolts = <1350000>;
-			regulator-max-microvolts = <1350000>;
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
 			regulator-boot-on;
 		};
 
 		pm2250_s4: s4 {
 			/* 1.2V-2.35V -> 2.05V (Power tree requirements) */
-			regulator-min-microvolts = <2072000>;
-			regulator-max-microvolts = <2072000>;
+			regulator-min-microvolt = <2072000>;
+			regulator-max-microvolt = <2072000>;
 			regulator-boot-on;
 		};
 
@@ -166,47 +166,47 @@
 
 		pm2250_l2: l2 {
 			/* LPDDR4X VDD2 */
-			regulator-min-microvolts = <1136000>;
-			regulator-max-microvolts = <1136000>;
+			regulator-min-microvolt = <1136000>;
+			regulator-max-microvolt = <1136000>;
 			regulator-always-on;
 			regulator-boot-on;
 		};
 
 		pm2250_l3: l3 {
 			/* LPDDR4X VDDQ */
-			regulator-min-microvolts = <616000>;
-			regulator-max-microvolts = <616000>;
+			regulator-min-microvolt = <616000>;
+			regulator-max-microvolt = <616000>;
 			regulator-always-on;
 			regulator-boot-on;
 		};
 
 		pm2250_l4: l4 {
-			/* max = 3.05V -> max = just below 3V (SDHCI2) */
-			regulator-min-microvolts = <1648000>;
-			regulator-max-microvolts = <2992000>;
+			/* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2700000>;
 			regulator-allow-set-load;
 		};
 
 		pm2250_l5: l5 {
 			/* CSI/DSI */
-			regulator-min-microvolts = <1232000>;
-			regulator-max-microvolts = <1232000>;
+			regulator-min-microvolt = <1232000>;
+			regulator-max-microvolt = <1232000>;
 			regulator-allow-set-load;
 			regulator-boot-on;
 		};
 
 		pm2250_l6: l6 {
 			/* DRAM PLL */
-			regulator-min-microvolts = <928000>;
-			regulator-max-microvolts = <928000>;
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <928000>;
 			regulator-always-on;
 			regulator-boot-on;
 		};
 
 		pm2250_l7: l7 {
 			/* Wi-Fi CX/MX */
-			regulator-min-microvolts = <664000>;
-			regulator-max-microvolts = <664000>;
+			regulator-min-microvolt = <664000>;
+			regulator-max-microvolt = <664000>;
 		};
 
 		/*
@@ -216,37 +216,37 @@
 
 		pm2250_l10: l10 {
 			/* Wi-Fi RFA */
-			regulator-min-microvolts = <1300000>;
-			regulator-max-microvolts = <1300000>;
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
 		};
 
 		pm2250_l11: l11 {
 			/* GPS RF1 */
-			regulator-min-microvolts = <1000000>;
-			regulator-max-microvolts = <1000000>;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
 			regulator-boot-on;
 		};
 
 		pm2250_l12: l12 {
 			/* USB PHYs */
-			regulator-min-microvolts = <928000>;
-			regulator-max-microvolts = <928000>;
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <928000>;
 			regulator-allow-set-load;
 			regulator-boot-on;
 		};
 
 		pm2250_l13: l13 {
 			/* USB/QFPROM/PLLs */
-			regulator-min-microvolts = <1800000>;
-			regulator-max-microvolts = <1800000>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 			regulator-allow-set-load;
 			regulator-boot-on;
 		};
 
 		pm2250_l14: l14 {
 			/* SDHCI1 VQMMC */
-			regulator-min-microvolts = <1800000>;
-			regulator-max-microvolts = <1800000>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 			regulator-allow-set-load;
 			/* Broken hardware, never turn it off! */
 			regulator-always-on;
@@ -254,8 +254,8 @@
 
 		pm2250_l15: l15 {
 			/* WCD/DSI/BT VDDIO */
-			regulator-min-microvolts = <1800000>;
-			regulator-max-microvolts = <1800000>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 			regulator-allow-set-load;
 			regulator-always-on;
 			regulator-boot-on;
@@ -263,47 +263,47 @@
 
 		pm2250_l16: l16 {
 			/* GPS RF2 */
-			regulator-min-microvolts = <1800000>;
-			regulator-max-microvolts = <1800000>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
 		};
 
 		pm2250_l17: l17 {
-			regulator-min-microvolts = <3000000>;
-			regulator-max-microvolts = <3000000>;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
 		};
 
 		pm2250_l18: l18 {
 			/* VDD_PXn */
-			regulator-min-microvolts = <1800000>;
-			regulator-max-microvolts = <1800000>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 		};
 
 		pm2250_l19: l19 {
 			/* VDD_PXn */
-			regulator-min-microvolts = <1800000>;
-			regulator-max-microvolts = <1800000>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 		};
 
 		pm2250_l20: l20 {
 			/* SDHCI1 VMMC */
-			regulator-min-microvolts = <2856000>;
-			regulator-max-microvolts = <2856000>;
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3600000>;
 			regulator-allow-set-load;
 		};
 
 		pm2250_l21: l21 {
 			/* SDHCI2 VMMC */
-			regulator-min-microvolts = <2960000>;
-			regulator-max-microvolts = <3300000>;
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3300000>;
 			regulator-allow-set-load;
 			regulator-boot-on;
 		};
 
 		pm2250_l22: l22 {
 			/* Wi-Fi */
-			regulator-min-microvolts = <3312000>;
-			regulator-max-microvolts = <3312000>;
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
 		};
 	};
 };
@@ -357,7 +357,7 @@
 };
 
 /* UART connected to the Micro-USB port via a FTDI chip */
-&uart0 {
+&uart4 {
 	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
@@ -366,6 +366,16 @@
 	status = "okay";
 };
 
+&usb_qmpphy {
+	vdda-phy-supply = <&pm2250_l12>;
+	vdda-pll-supply = <&pm2250_l13>;
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "host";
+};
+
 &usb_hsphy {
 	vdd-supply = <&pm2250_l12>;
 	vdda-pll-supply = <&pm2250_l13>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 9d1149b646cd..081a45ffcd77 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -57,6 +57,17 @@
 		};
 	};
 
+	i2c2_gpio: i2c {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -187,7 +198,7 @@
 	};
 };
 
-&i2c2 {
+&i2c2_gpio {
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -353,6 +364,8 @@
 		vreg_l9a_1p8: l9 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
+			regulator-always-on;
+			regulator-boot-on;
 		};
 
 		vreg_l10a_1p8: l10 {
@@ -518,7 +531,6 @@
 
 &usb_dwc3 {
 	maximum-speed = "super-speed";
-	dr_mode = "peripheral";
 };
 
 &usb_hsphy {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 10baab77be00..e67fcafb99e6 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -63,8 +63,8 @@
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
 			default-state = "off";
+			panic-indicator;
 		};
 
 		led-wlan {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 3e84431922cf..6099899ab2eb 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -367,6 +367,16 @@
 	};
 };
 
+&pmm8155au_1_gpios {
+	pmm8155au_1_sdc2_cd: sdc2-cd-default-state {
+		pins = "gpio4";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		power-source = <0>;
+	};
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -384,10 +394,10 @@
 &sdhc_2 {
 	status = "okay";
 
-	cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
+	pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &pmm8155au_1_sdc2_cd>;
 	vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */
 	vmmc-supply = <&vreg_l17a_2p96>;  /* Card power line */
 	bus-width = <4>;
@@ -505,13 +515,6 @@
 			bias-pull-up;		/* pull up */
 			drive-strength = <16>;	/* 16 MA */
 		};
-
-		sd-cd-pins {
-			pins = "gpio96";
-			function = "gpio";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
 	};
 
 	sdc2_off: sdc2-off-state {
@@ -532,13 +535,6 @@
 			bias-pull-up;		/* pull up */
 			drive-strength = <2>;	/* 2 MA */
 		};
-
-		sd-cd-pins {
-			pins = "gpio96";
-			function = "gpio";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
 	};
 
 	usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sa8540p.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sa8540p.dtsi
index 96b2c59ad02b..23888029cc11 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sa8540p.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sa8540p.dtsi
@@ -168,6 +168,9 @@
 };
 
 &gpucc {
+	/* SA8295P and SA8540P doesn't provide gfx.lvl */
+	/delete-property/ power-domains;
+
 	status = "disabled";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 9f4f58e831a4..44bea063aedb 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1602,8 +1602,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1689,8 +1689,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 7 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1752,8 +1752,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 10 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 9 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -2173,7 +2173,7 @@
 			compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt";
 			reg = <0x0 0x17c10000 0x0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		memtimer: timer@17c20000 {
@@ -2350,6 +2350,7 @@
 			phy-names = "serdes";
 
 			iommus = <&apps_smmu 0x140 0xf>;
+			dma-coherent;
 
 			snps,tso;
 			snps,pbl = <32>;
@@ -2383,6 +2384,7 @@
 			phy-names = "serdes";
 
 			iommus = <&apps_smmu 0x120 0xf>;
+			dma-coherent;
 
 			snps,tso;
 			snps,pbl = <32>;
@@ -2398,7 +2400,7 @@
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pcie0: pci@1c00000{
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
index b9d27ebab2db..336452298fa2 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
@@ -209,9 +209,22 @@
 		AVDD-supply = <&vreg_l15a_1p8>;
 		MICVDD-supply = <&reg_codec_3p3>;
 		VBAT-supply = <&reg_codec_3p3>;
+		DBVDD-supply = <&vreg_l15a_1p8>;
+		LDO1-IN-supply = <&vreg_l15a_1p8>;
+
+		/*
+		 * NOTE: The board has a path from this codec to the
+		 * DMIC microphones in the lid, however some of the option
+		 * resistors are absent and the microphones are connected
+		 * to the SoC instead.
+		 *
+		 * If the resistors were to be changed by the user to
+		 * connect the codec, the following could be used:
+		 *
+		 * realtek,dmic1-data-pin = <1>;
+		 * realtek,dmic1-clk-pin = <1>;
+		 */
 
-		realtek,dmic1-data-pin = <1>;
-		realtek,dmic1-clk-pin = <1>;
 		realtek,jd-src = <1>;
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 79c2f4a474bd..b2f653e3cdfe 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -970,6 +970,8 @@ ap_spi_fp: &spi10 {
 		vddrf-supply = <&pp1300_l2c>;
 		vddch0-supply = <&pp3300_l10c>;
 		max-speed = <3200000>;
+
+		qcom,local-bd-address-broken;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
index a79c0f2e1879..68b1c017a9fd 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
@@ -2795,49 +2796,28 @@
 			nvmem-cells = <&qusb2p_hstx_trim>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x3c>,
-			      <0 0x088ea000 0 0x18c>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe",
+				      "cfg_ahb";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x128>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x128>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x18>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		pmu@90b6300 {
@@ -2978,8 +2958,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 9 IRQ_TYPE_LEVEL_HIGH>;
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3001,7 +2981,8 @@
 				iommus = <&apps_smmu 0x540 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
 			};
@@ -3307,8 +3288,9 @@
 					      "ctrl_link_iface", "stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -3365,8 +3347,8 @@
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi0_phy 0>,
 				 <&mdss_dsi0_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "dsi0_phy_pll_out_byteclk",
@@ -3587,7 +3569,7 @@
 			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index d87ac485ef46..e058188f7a33 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -46,6 +46,26 @@
 	};
 };
 
+&lpass_aon {
+	status = "okay";
+};
+
+&lpass_core {
+	status = "okay";
+};
+
+&lpass_hm {
+	status = "okay";
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&pdc_reset {
+	status = "okay";
+};
+
 /* The PMIC PON code isn't compatible w/ how Chrome EC/BIOS handle things. */
 &pmk8350_pon {
 	status = "disabled";
@@ -84,6 +104,10 @@
 	dma-coherent;
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &wifi {
 	status = "okay";
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 925428a5f6ae..149c7962f2cb 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -18,6 +18,7 @@
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -649,18 +650,6 @@
 		};
 	};
 
-	eud_typec: connector {
-		compatible = "usb-c-connector";
-
-		ports {
-			port@0 {
-				con_eud: endpoint {
-					remote-endpoint = <&eud_con>;
-				};
-			};
-		};
-	};
-
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -869,7 +858,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
 				 <0>, <&pcie1_lane>,
-				 <0>, <0>, <0>, <0>;
+				 <0>, <0>, <0>,
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
 				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
 				      "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
@@ -936,6 +926,7 @@
 
 			bus-width = <8>;
 			supports-cqe;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -2108,8 +2099,16 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3",
+					  "msi4", "msi5", "msi6", "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
@@ -2266,6 +2265,7 @@
 			clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
 			clock-names = "iface";
 			#clock-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
 		};
 
 		lpass_rx_macro: codec@3200000 {
@@ -2417,6 +2417,7 @@
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "iface";
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
 		};
 
 		lpass_core: clock-controller@3900000 {
@@ -2427,6 +2428,7 @@
 			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
 		};
 
 		lpass_cpu: audio@3987000 {
@@ -2497,6 +2499,7 @@
 			clock-names = "bi_tcxo";
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
 		};
 
 		lpass_ag_noc: interconnect@3c40000 {
@@ -2565,7 +2568,8 @@
 				    "cx_mem",
 				    "cx_dbgc";
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-			iommus = <&adreno_smmu 0 0x401>;
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
 			operating-points-v2 = <&gpu_opp_table>;
 			qcom,gmu = <&gmu>;
 			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
@@ -2739,6 +2743,7 @@
 					"gpu_cc_hub_aon_clk";
 
 			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
 		};
 
 		remoteproc_mpss: remoteproc@4080000 {
@@ -3296,6 +3301,7 @@
 			operating-points-v2 = <&sdhc2_opp_table>;
 
 			bus-width = <4>;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 
@@ -3346,49 +3352,26 @@
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
-			compatible = "qcom,sc7280-qmp-usb3-dp-phy",
-				     "qcom,sm8250-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x40>,
-			      <0 0x088ea000 0 0x200>;
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sc7280-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <1>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		usb_2: usb@8cf8800 {
@@ -3416,8 +3399,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 12 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 13 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -3624,6 +3607,8 @@
 			      <0 0x88e2000 0 0x1000>;
 			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
 
+			status = "disabled";
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3634,13 +3619,6 @@
 						remote-endpoint = <&usb2_role_switch>;
 					};
 				};
-
-				port@1 {
-					reg = <1>;
-					eud_con: endpoint {
-						remote-endpoint = <&con_eud>;
-					};
-				};
 			};
 		};
 
@@ -3676,9 +3654,9 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 17 IRQ_TYPE_EDGE_BOTH>;
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -3702,7 +3680,8 @@
 				iommus = <&apps_smmu 0xe0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
 			};
@@ -3807,8 +3786,8 @@
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi_phy 0>,
 				 <&mdss_dsi_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&mdss_edp_phy 0>,
 				 <&mdss_edp_phy 1>;
 			clock-names = "bi_tcxo",
@@ -4144,8 +4123,9 @@
 						"stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -4215,6 +4195,7 @@
 			compatible = "qcom,sc7280-pdc-global";
 			reg = <0 0x0b5e0000 0 0x20000>;
 			#reset-cells = <1>;
+			status = "reserved"; /* Owned by firmware */
 		};
 
 		tsens0: thermal-sensor@c263000 {
@@ -5211,11 +5192,12 @@
 			};
 		};
 
-		watchdog@17c10000 {
+		watchdog: watchdog@17c10000 {
 			compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+			status = "reserved"; /* Owned by Gunyah hyp */
 		};
 
 		timer@17c20000 {
@@ -5363,6 +5345,14 @@
 			reg = <0 0x18591000 0 0x1000>,
 			      <0 0x18592000 0 0x1000>,
 			      <0 0x18593000 0 0x1000>;
+
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2";
+
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
 			#freq-domain-cells = <1>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc8180x-primus.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
index 7c114c752028..81037c423c73 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -42,7 +42,7 @@
 		pinctrl-0 = <&hall_int_active_state>;
 
 		lid-switch {
-			gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+			gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_LID>;
 			wakeup-source;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 486f7ffef43b..92b85de7706d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -289,7 +289,7 @@
 			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <241>;
+				entry-latency-us = <2411>;
 				exit-latency-us = <1461>;
 				min-residency-us = <4488>;
 				local-timer-stop;
@@ -297,7 +297,15 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <3300>;
+				exit-latency-us = <3300>;
+				min-residency-us = <6000>;
+			};
+
+			CLUSTER_SLEEP_AOSS_SLEEP: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100a344>;
 				entry-latency-us = <3263>;
@@ -581,7 +589,7 @@
 
 		CLUSTER_PD: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_AOSS_SLEEP>;
 		};
 	};
 
@@ -781,6 +789,7 @@
 			clock-names = "bi_tcxo",
 				      "bi_tcxo_ao",
 				      "sleep_clk";
+			power-domains = <&rpmhpd SC8180X_CX>;
 		};
 
 		qupv3_id_0: geniqup@8c0000 {
@@ -1749,23 +1758,29 @@
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
-			phys = <&pcie0_lane>;
+			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
 
-		pcie0_phy: phy-wrapper@1c06000 {
+		pcie0_phy: phy@1c06000 {
 			compatible = "qcom,sc8180x-qmp-pcie-phy";
-			reg = <0 0x1c06000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c06000 0 0x1000>;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_0_pipe_clk";
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 			reset-names = "phy";
@@ -1774,21 +1789,6 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie0_lane: phy@1c06200 {
-				reg = <0 0x1c06200 0 0x170>, /* tx0 */
-				      <0 0x1c06400 0 0x200>, /* rx0 */
-				      <0 0x1c06a00 0 0x1f0>, /* pcs */
-				      <0 0x1c06600 0 0x170>, /* tx1 */
-				      <0 0x1c06800 0 0x200>, /* rx1 */
-				      <0 0x1c06e00 0 0xf4>; /* pcs_com */
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#clock-cells = <0>;
-				clock-output-names = "pcie_0_pipe_clk";
-				#phy-cells = <0>;
-			};
 		};
 
 		pcie3: pci@1c08000 {
@@ -1853,26 +1853,33 @@
 			power-domains = <&gcc PCIE_3_GDSC>;
 
 			interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_3 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
-			phys = <&pcie3_lane>;
+			phys = <&pcie3_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
 
-		pcie3_phy: phy-wrapper@1c0c000 {
+		pcie3_phy: phy@1c0c000 {
 			compatible = "qcom,sc8180x-qmp-pcie-phy";
-			reg = <0 0x1c0c000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c0c000 0 0x1000>;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_3_CLKREF_CLK>,
-				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE3_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_3_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_3_pipe_clk";
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_3_PHY_BCR>;
 			reset-names = "phy";
@@ -1881,21 +1888,6 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie3_lane: phy@1c0c200 {
-				reg = <0 0x1c0c200 0 0x170>, /* tx0 */
-				      <0 0x1c0c400 0 0x200>, /* rx0 */
-				      <0 0x1c0ca00 0 0x1f0>, /* pcs */
-				      <0 0x1c0c600 0 0x170>, /* tx1 */
-				      <0 0x1c0c800 0 0x200>, /* rx1 */
-				      <0 0x1c0ce00 0 0xf4>; /* pcs_com */
-				clocks = <&gcc GCC_PCIE_3_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#clock-cells = <0>;
-				clock-output-names = "pcie_3_pipe_clk";
-				#phy-cells = <0>;
-			};
 		};
 
 		pcie1: pci@1c10000 {
@@ -1960,26 +1952,33 @@
 			power-domains = <&gcc PCIE_1_GDSC>;
 
 			interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_1 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
-			phys = <&pcie1_lane>;
+			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
 
-		pcie1_phy: phy-wrapper@1c16000 {
+		pcie1_phy: phy@1c16000 {
 			compatible = "qcom,sc8180x-qmp-pcie-phy";
-			reg = <0 0x1c16000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c16000 0 0x1000>;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
-				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_1_pipe_clk";
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
 			reset-names = "phy";
@@ -1988,21 +1987,6 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie1_lane: phy@1c0e200 {
-				reg = <0 0x1c16200 0 0x170>, /* tx0 */
-				      <0 0x1c16400 0 0x200>, /* rx0 */
-				      <0 0x1c16a00 0 0x1f0>, /* pcs */
-				      <0 0x1c16600 0 0x170>, /* tx1 */
-				      <0 0x1c16800 0 0x200>, /* rx1 */
-				      <0 0x1c16e00 0 0xf4>; /* pcs_com */
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
-				clock-names = "pipe0";
-				#clock-cells = <0>;
-				clock-output-names = "pcie_1_pipe_clk";
-
-				#phy-cells = <0>;
-			};
 		};
 
 		pcie2: pci@1c18000 {
@@ -2067,26 +2051,33 @@
 			power-domains = <&gcc PCIE_2_GDSC>;
 
 			interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_2 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
-			phys = <&pcie2_lane>;
+			phys = <&pcie2_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
 
-		pcie2_phy: phy-wrapper@1c1c000 {
+		pcie2_phy: phy@1c1c000 {
 			compatible = "qcom,sc8180x-qmp-pcie-phy";
-			reg = <0 0x1c1c000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c1c000 0 0x1000>;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_2_CLKREF_CLK>,
-				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_2_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_2_pipe_clk";
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_2_PHY_BCR>;
 			reset-names = "phy";
@@ -2095,22 +2086,6 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie2_lane: phy@1c0e200 {
-				reg = <0 0x1c1c200 0 0x170>, /* tx0 */
-				      <0 0x1c1c400 0 0x200>, /* rx0 */
-				      <0 0x1c1ca00 0 0x1f0>, /* pcs */
-				      <0 0x1c1c600 0 0x170>, /* tx1 */
-				      <0 0x1c1c800 0 0x200>, /* rx1 */
-				      <0 0x1c1ce00 0 0xf4>; /* pcs_com */
-				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#clock-cells = <0>;
-				clock-output-names = "pcie_2_pipe_clk";
-
-				#phy-cells = <0>;
-			};
 		};
 
 		ufs_mem_hc: ufshc@1d84000 {
@@ -2118,7 +2093,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2157,10 +2132,8 @@
 
 		ufs_mem_phy: phy-wrapper@1d87000 {
 			compatible = "qcom,sc8180x-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 			clock-names = "ref",
@@ -2168,16 +2141,12 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		ipa_virt: interconnect@1e00000 {
@@ -2576,11 +2545,14 @@
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc8180x-llcc";
-			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
-			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
-			      <0 0x09600000 0 0x50000>;
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+			      <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>,
+			      <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
 			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
-				    "llcc3_base", "llcc_broadcast_base";
+				    "llcc3_base", "llcc4_base", "llcc5_base",
+				    "llcc6_base", "llcc7_base",  "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -2594,10 +2566,10 @@
 		usb_prim: usb@a6f8800 {
 			compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
@@ -2668,10 +2640,10 @@
 				      "xo";
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 			power-domains = <&gcc USB30_SEC_GDSC>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 40 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -2756,10 +2728,8 @@
 					      "core",
 					      "vsync";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				assigned-clock-rates = <460000000>,
-						       <19200000>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
 
 				operating-points-v2 = <&mdp_opp_table>;
 				power-domains = <&rpmhpd SC8180X_MMCX>;
@@ -3219,7 +3189,7 @@
 				 <&dispcc DISP_CC_MDSS_AHB_CLK>;
 			clock-names = "aux", "cfg_ahb";
 
-			power-domains = <&dispcc MDSS_GDSC>;
+			power-domains = <&rpmhpd SC8180X_MX>;
 
 			#clock-cells = <1>;
 			#phy-cells = <0>;
@@ -3245,6 +3215,7 @@
 				      "edp_phy_pll_link_clk",
 				      "edp_phy_pll_vco_div_clk";
 			power-domains = <&rpmhpd SC8180X_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -3283,7 +3254,7 @@
 
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp";
-			reg = <0x0 0x0c300000 0x0 0x100000>;
+			reg = <0x0 0x0c300000 0x0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
 			mboxes = <&apss_shared 0>;
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 2daab00b1373..204aac9dba2a 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -458,6 +458,8 @@
 };
 
 &mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
+
 	vdda-phy-supply = <&vreg_l6b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 6dc92a9252c2..60525d30e829 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -82,6 +82,9 @@
 	leds {
 		compatible = "gpio-leds";
 
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_indicator_en>;
+
 		led-camera-indicator {
 			label = "white:camera-indicator";
 			function = LED_FUNCTION_INDICATOR;
@@ -601,6 +604,7 @@
 };
 
 &mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
 	vdda-phy-supply = <&vreg_l6b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
@@ -615,15 +619,16 @@
 
 	status = "okay";
 
-	/* FIXME: verify */
 	touchscreen@10 {
-		compatible = "hid-over-i2c";
+		compatible = "elan,ekth5015m", "elan,ekth6915";
 		reg = <0x10>;
 
-		hid-descr-addr = <0x1>;
 		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_s10b>;
+		reset-gpios = <&tlmm 99 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		no-reset-on-power-off;
+
+		vcc33-supply = <&vreg_misc_3p3>;
+		vccio-supply = <&vreg_misc_3p3>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&ts0_default>;
@@ -717,6 +722,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 
@@ -1277,6 +1284,13 @@
 		};
 	};
 
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio28";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio25";
 		function = "gpio";
@@ -1438,8 +1452,8 @@
 		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
-			output-high;
-			drive-strength = <16>;
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index cad59af7ccef..6425c74edd60 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1773,6 +1773,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_4_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie4_phy>;
 			phy-names = "pciephy";
@@ -1797,6 +1798,7 @@
 			assigned-clock-rates = <100000000>;
 
 			power-domains = <&gcc PCIE_4_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			resets = <&gcc GCC_PCIE_4_PHY_BCR>;
 			reset-names = "phy";
@@ -1871,6 +1873,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_3B_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie3b_phy>;
 			phy-names = "pciephy";
@@ -1895,6 +1898,7 @@
 			assigned-clock-rates = <100000000>;
 
 			power-domains = <&gcc PCIE_3B_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			resets = <&gcc GCC_PCIE_3B_PHY_BCR>;
 			reset-names = "phy";
@@ -1969,6 +1973,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_3A_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie3a_phy>;
 			phy-names = "pciephy";
@@ -1994,6 +1999,7 @@
 			assigned-clock-rates = <100000000>;
 
 			power-domains = <&gcc PCIE_3A_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			resets = <&gcc GCC_PCIE_3A_PHY_BCR>;
 			reset-names = "phy";
@@ -2070,6 +2076,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_2B_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie2b_phy>;
 			phy-names = "pciephy";
@@ -2094,6 +2101,7 @@
 			assigned-clock-rates = <100000000>;
 
 			power-domains = <&gcc PCIE_2B_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			resets = <&gcc GCC_PCIE_2B_PHY_BCR>;
 			reset-names = "phy";
@@ -2168,6 +2176,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_2A_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie2a_phy>;
 			phy-names = "pciephy";
@@ -2193,6 +2202,7 @@
 			assigned-clock-rates = <100000000>;
 
 			power-domains = <&gcc PCIE_2A_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			resets = <&gcc GCC_PCIE_2A_PHY_BCR>;
 			reset-names = "phy";
@@ -4225,7 +4235,7 @@
 			compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
index ec6003212c4d..0f3f57fb860e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1258,6 +1258,7 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 
 				/*
 				 * SDM630 technically supports USB3 but I
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm670.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm670.dtsi
index 84cd2e39266f..730c8351bcaa 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -1295,10 +1295,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -1328,7 +1328,8 @@
 			compatible = "qcom,sdm670-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>;
 			qcom,pdc-ranges = <0 480 40>, <41 521 7>, <49 529 4>,
-					  <54 534 24>, <79 559 30>, <115 630 7>;
+					  <54 534 24>, <79 559 15>, <94 609 15>,
+					  <115 630 7>;
 			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
 			interrupt-controller;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index f86e7acdfd99..0ab5e8f53ac9 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -143,16 +143,20 @@
 	};
 };
 
+&cpufreq_hw {
+	/delete-property/ interrupts-extended; /* reference to lmh_cluster[01] */
+};
+
 &psci {
-	/delete-node/ cpu0;
-	/delete-node/ cpu1;
-	/delete-node/ cpu2;
-	/delete-node/ cpu3;
-	/delete-node/ cpu4;
-	/delete-node/ cpu5;
-	/delete-node/ cpu6;
-	/delete-node/ cpu7;
-	/delete-node/ cpu-cluster0;
+	/delete-node/ power-domain-cpu0;
+	/delete-node/ power-domain-cpu1;
+	/delete-node/ power-domain-cpu2;
+	/delete-node/ power-domain-cpu3;
+	/delete-node/ power-domain-cpu4;
+	/delete-node/ power-domain-cpu5;
+	/delete-node/ power-domain-cpu6;
+	/delete-node/ power-domain-cpu7;
+	/delete-node/ power-domain-cluster;
 };
 
 &cpus {
@@ -275,6 +279,14 @@
 			   &CLUSTER_SLEEP_0>;
 };
 
+&lmh_cluster0 {
+	status = "disabled";
+};
+
+&lmh_cluster1 {
+	status = "disabled";
+};
+
 /*
  * Reserved memory changes
  *
@@ -338,6 +350,8 @@
 
 
 &apps_rsc {
+	/delete-property/ power-domains;
+
 	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 9fbfb859b1d6..73f2e8f5bbe1 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -67,8 +67,8 @@
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
 			default-state = "off";
+			panic-indicator;
 		};
 
 		led-1 {
@@ -580,7 +580,7 @@
 &pcie0 {
 	status = "okay";
 	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
 
 	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm845-mtp.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index ccfe9cb5ef88..a40fa9fd537b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -716,6 +716,8 @@
 	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 190e6e6321ea..4f283933fd15 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -485,13 +485,13 @@
 };
 
 &q6afedai {
-	qi2s@22 {
-		reg = <22>;
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
 		qcom,sd-lines = <1>;
 	};
 
-	qi2s@23 {
-		reg = <23>;
+	dai@23 {
+		reg = <QUATERNARY_MI2S_TX>;
 		qcom,sd-lines = <0>;
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 055ca80c0075..dcdc8a0cd181 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -18,6 +18,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
@@ -2634,6 +2635,8 @@
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 			status = "disabled";
@@ -3363,8 +3366,8 @@
 
 			qcom,qmp = <&aoss_qmp>;
 
-			power-domains = <&rpmhpd SDM845_CX>,
-					<&rpmhpd SDM845_MX>;
+			power-domains = <&rpmhpd SDM845_LCX>,
+					<&rpmhpd SDM845_LMX>;
 			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&slpi_mem>;
@@ -3555,11 +3558,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					etf_in: endpoint {
 						remote-endpoint =
 						  <&merge_funnel_out>;
@@ -3984,80 +3984,54 @@
 			nvmem-cells = <&qusb2s_hstx_trim>;
 		};
 
-		usb_1_qmpphy: phy@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sdm845-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x38>,
-			      <0 0x088ea000 0 0x40>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe",
+				      "cfg_ahb";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x128>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x128>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x18c>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x128>,
-				      <0 0x088eb400 0 0x1fc>,
-				      <0 0x088eb800 0 0x218>,
-				      <0 0x088eb600 0 0x70>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		usb_1: usb@a6f8800 {
@@ -4084,10 +4058,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -4106,7 +4080,8 @@
 				iommus = <&apps_smmu 0x740 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4135,10 +4110,10 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -4157,7 +4132,8 @@
 				iommus = <&apps_smmu 0x760 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4574,8 +4550,9 @@
 					      "ctrl_link_iface", "stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -4913,8 +4890,8 @@
 				 <&mdss_dsi0_phy 1>,
 				 <&mdss_dsi1_phy 0>,
 				 <&mdss_dsi1_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "gcc_disp_gpll0_div_clk_src",
@@ -5118,7 +5095,7 @@
 			compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
 			reg = <0 0x17980000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		apss_shared: mailbox@17990000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 49ec09e2214a..62f52296c953 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -488,6 +488,7 @@
 &ipa {
 	qcom,gsi-loader = "self";
 	memory-region = <&ipa_fw_mem>;
+	firmware-name = "/*(DEBLOBBED)*/";
 	status = "okay";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdx75-idp.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index 10d15871f2c4..a14e0650c4a8 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -44,7 +44,7 @@
 };
 
 &apps_rsc {
-	pmx75-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pmx75-rpmh-regulators";
 		qcom,pmic-id = "b";
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 839c60351240..821db9b85185 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -591,6 +591,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs: syscon@3c0000 {
+			compatible = "qcom,sm6115-tcsr", "syscon";
+			reg = <0x0 0x003c0000 0x0 0x40000>;
+		};
+
 		tlmm: pinctrl@500000 {
 			compatible = "qcom,sm6115-tlmm";
 			reg = <0x0 0x00500000 0x0 0x400000>,
@@ -856,6 +861,8 @@
 
 			#phy-cells = <0>;
 
+			qcom,tcsr-reg = <&tcsr_regs 0xb244>;
+
 			status = "disabled";
 		};
 
@@ -1036,6 +1043,8 @@
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 			clock-names = "ref", "ref_aux";
 
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 			status = "disabled";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
index d7c1a40617c6..07081088ba14 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -1165,6 +1165,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <66666667>;
 
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
@@ -1208,7 +1212,7 @@
 
 		apps_smmu: iommu@c600000 {
 			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
-			reg = <0xc600000 0x80000>;
+			reg = <0x0c600000 0x80000>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 8fd6f4d03490..2efceb49a321 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1197,6 +1197,8 @@
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
@@ -1297,6 +1299,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "adsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -1557,6 +1560,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "cdsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -1864,6 +1868,7 @@
 				snps,dis_enblslpm_quirk;
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
@@ -2524,7 +2529,7 @@
 			compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi
index e7ff55443da7..e56f7ea4ebc6 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -311,6 +311,25 @@
 		};
 	};
 
+	mpm: interrupt-controller {
+		compatible = "qcom,mpm";
+		qcom,rpm-msg-ram = <&apss_mpm>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#power-domain-cells = <0>;
+		interrupt-parent = <&intc>;
+		qcom,mpm-pin-count = <96>;
+		qcom,mpm-pin-map = <5 296>,  /* Soundwire wake_irq */
+				   <12 422>, /* DWC3 ss_phy_irq */
+				   <86 183>, /* MPM wake, SPMI */
+				   <89 314>, /* TSENS0 0C */
+				   <90 315>, /* TSENS1 0C */
+				   <93 164>, /* DWC3 dm_hs_phy_irq */
+				   <94 165>; /* DWC3 dp_hs_phy_irq */
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -486,6 +505,7 @@
 
 		CLUSTER_PD: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
+			power-domains = <&mpm>;
 			domain-idle-states = <&CLUSTER_SLEEP_0>;
 		};
 	};
@@ -808,7 +828,7 @@
 			reg = <0 0x00500000 0 0x800000>;
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&tlmm 0 0 157>;
-			/* TODO: Hook up MPM as wakeup-parent when it's there */
+			wakeup-parent = <&mpm>;
 			interrupt-controller;
 			gpio-controller;
 			#interrupt-cells = <2>;
@@ -930,7 +950,7 @@
 			      <0 0x01c0a000 0 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -962,8 +982,15 @@
 		};
 
 		rpm_msg_ram: sram@45f0000 {
-			compatible = "qcom,rpm-msg-ram";
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
 			reg = <0 0x045f0000 0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
 		};
 
 		sram@4690000 {
@@ -1360,10 +1387,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <133333333>;
 
-			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 93 IRQ_TYPE_EDGE_BOTH>,
+					      <&mpm 94 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8150-hdk.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index 30e531feda56..1b63f05a2938 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -127,8 +127,6 @@
 		vdda_sp_sensor:
 		vdda_ufs_2ln_core_1:
 		vdda_ufs_2ln_core_2:
-		vdda_usb_ss_dp_core_1:
-		vdda_usb_ss_dp_core_2:
 		vdda_qlink_lv:
 		vdda_qlink_lv_ck:
 		vreg_l5a_0p875: ldo5 {
@@ -210,6 +208,12 @@
 			regulator-max-microvolt = <3008000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_l18a_0p8: ldo18 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
 	};
 
 	regulators-1 {
@@ -445,13 +449,13 @@
 &usb_1_qmpphy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-pll-supply = <&vreg_l18a_0p8>;
 };
 
 &usb_2_qmpphy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-pll-supply = <&vreg_l5a_0p875>;
 };
 
 &usb_1 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 06c53000bb74..73ef228ff268 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1876,8 +1876,8 @@
 			phys = <&pcie0_lane>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
@@ -1893,8 +1893,12 @@
 			ranges;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
 				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "refgen";
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen";
 
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 			reset-names = "phy";
@@ -1974,7 +1978,7 @@
 			phys = <&pcie1_lane>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
@@ -1991,8 +1995,12 @@
 			ranges;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
 				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "refgen";
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen";
 
 			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
 			reset-names = "phy";
@@ -2965,11 +2973,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					replicator1_in: endpoint {
 						remote-endpoint = <&replicator_out1>;
 					};
@@ -3584,10 +3589,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3637,10 +3642,10 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3951,6 +3956,7 @@
 				      "dp_phy_pll_link_clk",
 				      "dp_phy_pll_vco_div_clk";
 			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -4189,7 +4195,7 @@
 			compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
index a4e58ad731c3..b522d19f3a13 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2169,7 +2169,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2217,10 +2217,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8250-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -2228,16 +2226,12 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -2830,11 +2824,8 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					tpda_out_funnel_qatb: endpoint {
 						remote-endpoint = <&funnel_qatb_in_tpda>;
 					};
@@ -2877,11 +2868,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_qatb_in_tpda: endpoint {
 						remote-endpoint = <&tpda_out_funnel_qatb>;
 					};
@@ -3090,11 +3077,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					etf_in_funnel_swao_out: endpoint {
 						remote-endpoint = <&funnel_swao_out_etf>;
 					};
@@ -3178,8 +3162,6 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				port {
 					tpdm_mm_out_tpda9: endpoint {
 						remote-endpoint = <&tpda_9_in_tpdm_mm>;
@@ -3445,11 +3427,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_apss_merg_in_funnel_apss: endpoint {
 					remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
 					};
@@ -5664,7 +5642,7 @@
 			compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 00604bf7724f..d4f1b36c7aeb 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -918,9 +918,9 @@
 			};
 		};
 
-		gpi_dma0: dma-controller@9800000 {
+		gpi_dma0: dma-controller@900000 {
 			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
-			reg = <0 0x09800000 0 0x60000>;
+			reg = <0 0x00900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -1731,6 +1731,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 			status = "disabled";
@@ -2020,7 +2022,7 @@
 			compatible = "qcom,sm8350-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2062,7 +2064,7 @@
 			compatible = "qcom,sm8350-slpi-pas";
 			reg = <0 0x05c00000 0 0x4000>;
 
-			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2964,7 +2966,7 @@
 			};
 
 			qup_uart18_default: qup-uart18-default-state {
-				pins = "gpio58", "gpio59";
+				pins = "gpio68", "gpio69";
 				function = "qup18";
 				drive-strength = <2>;
 				bias-disable;
@@ -3206,7 +3208,7 @@
 			compatible = "qcom,sm8350-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3511,7 +3513,7 @@
 			compatible = "qcom,sm8350-cdsp-pas";
 			reg = <0 0x98900000 0 0x1400000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 2a60cf8bd891..a34f460240a0 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1025,6 +1025,12 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart20_default>;
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1417,6 +1423,12 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 		};
@@ -1762,12 +1774,8 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
-			/*
-			 * MSIs for BDF (1:0.0) only works with Device ID 0x5980.
-			 * Hence, the IDs are swapped.
-			 */
-			msi-map = <0x0 &gic_its 0x5981 0x1>,
-				  <0x100 &gic_its 0x5980 0x1>;
+			msi-map = <0x0 &gic_its 0x5980 0x1>,
+				  <0x100 &gic_its 0x5981 0x1>;
 			msi-map-mask = <0xff00>;
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1876,12 +1884,8 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			/*
-			 * MSIs for BDF (1:0.0) only works with Device ID 0x5a00.
-			 * Hence, the IDs are swapped.
-			 */
-			msi-map = <0x0 &gic_its 0x5a01 0x1>,
-				  <0x100 &gic_its 0x5a00 0x1>;
+			msi-map = <0x0 &gic_its 0x5a00 0x1>,
+				  <0x100 &gic_its 0x5a01 0x1>;
 			msi-map-mask = <0xff00>;
 			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -2176,7 +2180,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr4: soundwire-controller@31f0000 {
+		swr4: soundwire@31f0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x031f0000 0 0x2000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2224,7 +2228,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2291,7 +2295,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03250000 0 0x2000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2318,14 +2322,14 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@33b0000 {
+		swr2: soundwire@33b0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x033b0000 0 0x2000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wakeup";
 
-			clocks = <&vamacro>;
+			clocks = <&txmacro>;
 			clock-names = "iface";
 			label = "TX";
 
@@ -4196,6 +4200,8 @@
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
 				 <&gcc GCC_UFS_0_CLKREF_EN>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 			status = "disabled";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index d0b544b22c6a..dcbf35b304ba 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -743,7 +743,7 @@
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		qcom,tx-port-mapping = <1 1 2 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 981d4ca8973c..df4c3b79c429 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -835,7 +835,7 @@
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		qcom,tx-port-mapping = <1 1 2 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
index d115960bdeec..90e6cd239f56 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -283,9 +283,9 @@
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <800>;
+				entry-latency-us = <550>;
 				exit-latency-us = <750>;
-				min-residency-us = <4090>;
+				min-residency-us = <6700>;
 				local-timer-stop;
 			};
 
@@ -294,8 +294,18 @@
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
 				entry-latency-us = <600>;
-				exit-latency-us = <1550>;
-				min-residency-us = <4791>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			PRIME_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "goldplus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
 				local-timer-stop;
 			};
 		};
@@ -304,17 +314,17 @@
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
-				entry-latency-us = <1050>;
-				exit-latency-us = <2500>;
-				min-residency-us = <5309>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
 			};
 
 			CLUSTER_SLEEP_1: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c344>;
-				entry-latency-us = <2700>;
-				exit-latency-us = <3500>;
-				min-residency-us = <13959>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
 			};
 		};
 	};
@@ -398,7 +408,7 @@
 		CPU_PD7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			domain-idle-states = <&PRIME_CPU_SLEEP_0>;
 		};
 
 		CLUSTER_PD: power-domain-cluster {
@@ -2034,7 +2044,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr3: soundwire-controller@6ab0000 {
+		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2080,7 +2090,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@6ad0000 {
+		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2145,7 +2155,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@6b10000 {
+		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2172,13 +2182,13 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@6d30000 {
+		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wakeup";
-			clocks = <&lpass_vamacro>;
+			clocks = <&lpass_txmacro>;
 			clock-names = "iface";
 			label = "TX";
 
@@ -2893,8 +2903,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
@@ -3007,7 +3017,7 @@
 		spmi_bus: spmi@c400000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0 0x0c400000 0 0x3000>,
-			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c500000 0 0x400000>,
 			      <0 0x0c440000 0 0x80000>,
 			      <0 0x0c4c0000 0 0x20000>,
 			      <0 0x0c42d000 0 0x4000>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 4e67a0356497..84e0eb48a1b8 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -658,7 +658,7 @@
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779a0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6800000 0 0x800>;
+			reg = <0 0xe6800000 0 0x1000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
@@ -706,7 +706,7 @@
 		avb1: ethernet@e6810000 {
 			compatible = "renesas,etheravb-r8a779a0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6810000 0 0x800>;
+			reg = <0 0xe6810000 0 0x1000>;
 			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
@@ -2910,6 +2910,9 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r8a779f0.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index ecdd5a523fa3..555fff9364e3 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -1181,7 +1181,10 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 
 	ufs30_clk: ufs30-clk {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
index bb4a5270f71b..913f70fe6c5c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
@@ -187,6 +187,9 @@
 };
 
 &hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index d3d25e077c5d..87fbc5331690 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -161,11 +161,6 @@
 		};
 	};
 
-	psci {
-		compatible = "arm,psci-1.0", "arm,psci-0.2";
-		method = "smc";
-	};
-
 	extal_clk: extal {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -185,13 +180,24 @@
 		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
-	/* External SCIF clock - to be overridden by boards that provide it */
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clocks - to be overridden by boards that provide them */
 	scif_clk: scif {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
 	};
 
+	scif_clk2: scif2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
@@ -681,7 +687,7 @@
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 516>,
 				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
-				 <&scif_clk>;
+				 <&scif_clk2>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
 			       <&dmac1 0x35>, <&dmac1 0x34>;
@@ -761,7 +767,7 @@
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779g0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6800000 0 0x800>;
+			reg = <0 0xe6800000 0 0x1000>;
 			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
@@ -808,7 +814,7 @@
 		avb1: ethernet@e6810000 {
 			compatible = "renesas,etheravb-r8a779g0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6810000 0 0x800>;
+			reg = <0 0xe6810000 0 0x1000>;
 			interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
@@ -1057,7 +1063,7 @@
 			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 705>,
 				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
-				 <&scif_clk>;
+				 <&scif_clk2>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
 			       <&dmac1 0x59>, <&dmac1 0x58>;
@@ -1777,6 +1783,37 @@
 			};
 		};
 
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a779g0",
+				     "renesas,rcar-gen4-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds0 32>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a779g0-rpc-if",
+				     "renesas,rcar-gen4-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 629>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		ipmmu_rt0: iommu@ee480000 {
 			compatible = "renesas,ipmmu-r8a779g0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
@@ -1886,37 +1923,6 @@
 			#iommu-cells = <1>;
 		};
 
-		mmc0: mmc@ee140000 {
-			compatible = "renesas,sdhi-r8a779g0",
-				     "renesas,rcar-gen4-sdhi";
-			reg = <0 0xee140000 0 0x2000>;
-			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 706>,
-				 <&cpg CPG_CORE R8A779G0_CLK_SD0H>;
-			clock-names = "core", "clkh";
-			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
-			resets = <&cpg 706>;
-			max-frequency = <200000000>;
-			iommus = <&ipmmu_ds0 32>;
-			status = "disabled";
-		};
-
-		rpc: spi@ee200000 {
-			compatible = "renesas,r8a779g0-rpc-if",
-				     "renesas,rcar-gen4-rpc-if";
-			reg = <0 0xee200000 0 0x200>,
-			      <0 0x08000000 0 0x04000000>,
-			      <0 0xee208000 0 0x100>;
-			reg-names = "regs", "dirmap", "wbuf";
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 629>;
-			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
-			resets = <&cpg 629>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
 		gic: interrupt-controller@f1000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -2344,6 +2350,9 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
index 2ab231572d95..4b72de43b71c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
@@ -50,7 +50,10 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };
 
@@ -109,7 +112,13 @@
 			     <SOC_PERIPHERAL_IRQ(473) IRQ_TYPE_LEVEL_HIGH>,
 			     <SOC_PERIPHERAL_IRQ(474) IRQ_TYPE_LEVEL_HIGH>,
 			     <SOC_PERIPHERAL_IRQ(475) IRQ_TYPE_LEVEL_HIGH>,
-			     <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>;
+			     <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(35) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(36) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(37) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(38) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(39) IRQ_TYPE_EDGE_RISING>;
 		interrupt-names = "nmi",
 				  "irq0", "irq1", "irq2", "irq3",
 				  "irq4", "irq5", "irq6", "irq7",
@@ -121,7 +130,9 @@
 				  "tint20", "tint21", "tint22", "tint23",
 				  "tint24", "tint25", "tint26", "tint27",
 				  "tint28", "tint29", "tint30", "tint31",
-				  "bus-err";
+				  "bus-err", "ec7tie1-0", "ec7tie2-0",
+				  "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+				  "ec7tiovf-1";
 		clocks = <&cpg CPG_MOD R9A07G043_IA55_CLK>,
 			<&cpg CPG_MOD R9A07G043_IA55_PCLK>;
 		clock-names = "clk", "pclk";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r9a07g044.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 66f68fc2b241..a877738c3048 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -905,7 +905,27 @@
 				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3",
+					  "irq4", "irq5", "irq6", "irq7",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "bus-err", "ec7tie1-0", "ec7tie2-0",
+					  "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+					  "ec7tiovf-1";
 			clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
 				 <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
 			clock-names = "clk", "pclk";
@@ -1268,6 +1288,9 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r9a07g054.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
index 1f1d481dc783..3f01b096cfb7 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -912,7 +912,27 @@
 				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3",
+					  "irq4", "irq5", "irq6", "irq7",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "bus-err", "ec7tie1-0", "ec7tie2-0",
+					  "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+					  "ec7tiovf-1";
 			clocks = <&cpg CPG_MOD R9A07G054_IA55_CLK>,
 				 <&cpg CPG_MOD R9A07G054_IA55_PCLK>;
 			clock-names = "clk", "pclk";
@@ -1275,6 +1295,9 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 3885ef3454ff..50de17e4fb3f 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -234,6 +234,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 
@@ -294,6 +295,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -314,6 +316,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -324,6 +327,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 	};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
index 42ce78beb413..20955556b624 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -632,6 +632,7 @@
 		clock-names = "spiclk", "apb_pclk";
 		dmas = <&dmac 12>, <&dmac 13>;
 		dma-names = "tx", "rx";
+		num-cs = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
 		#address-cells = <1>;
@@ -647,6 +648,7 @@
 		clock-names = "spiclk", "apb_pclk";
 		dmas = <&dmac 14>, <&dmac 15>;
 		dma-names = "tx", "rx";
+		num-cs = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
 		#address-cells = <1>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
index e9810d2f0407..5ca0cc19f92c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
@@ -5,6 +5,8 @@
  */
 
 /dts-v1/;
+
+#include <dt-bindings/leds/common.h>
 #include "rk3308.dtsi"
 
 / {
@@ -15,6 +17,7 @@
 		ethernet0 = &gmac;
 		mmc0 = &emmc;
 		mmc1 = &sdmmc;
+		mmc2 = &sdio;
 	};
 
 	chosen {
@@ -24,17 +27,21 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
+		pinctrl-0 = <&green_led>, <&heartbeat_led>;
 
 		green-led {
+			color = <LED_COLOR_ID_GREEN>;
 			default-state = "on";
+			function = LED_FUNCTION_POWER;
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 			label = "rockpis:green:power";
 			linux,default-trigger = "default-on";
 		};
 
 		blue-led {
+			color = <LED_COLOR_ID_BLUE>;
 			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
 			label = "rockpis:blue:user";
 			linux,default-trigger = "heartbeat";
@@ -126,21 +133,37 @@
 };
 
 &emmc {
-	bus-width = <4>;
 	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
+	cap-sd-highspeed;
+	no-sdio;
 	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
 	vmmc-supply = <&vcc_io>;
 	status = "okay";
 };
 
 &gmac {
 	clock_in_out = "output";
+	phy-handle = <&rtl8201f>;
 	phy-supply = <&vcc_io>;
-	snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 50000 50000>;
 	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8201f: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac_rst>;
+			reset-assert-us = <20000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &i2c1 {
@@ -151,12 +174,32 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&rtc_32k>;
 
+	bluetooth {
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		host_wake_bt: host-wake-bt {
+			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gmac {
+		mac_rst: mac-rst {
+			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	leds {
-		green_led_gio: green-led-gpio {
+		green_led: green-led {
 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		heartbeat_led_gpio: heartbeat-led-gpio {
+		heartbeat_led: heartbeat-led {
 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -194,15 +237,31 @@
 	cap-sd-highspeed;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	max-frequency = <1000000>;
+	max-frequency = <100000000>;
 	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	no-sd;
 	non-removable;
-	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";
+
+	rtl8723ds: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake>;
+	};
 };
 
 &sdmmc {
+	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	disable-wp;
+	vmmc-supply = <&vcc_io>;
 	status = "okay";
 };
 
@@ -221,16 +280,22 @@
 };
 
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
 	status = "okay";
 };
 
 &uart4 {
+	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
-		compatible = "realtek,rtl8723bs-bt";
-		device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+		compatible = "realtek,rtl8723ds-bt";
+		device-wake-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
index 5d7d567283e5..4237f2ee8fee 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
@@ -26,9 +26,11 @@
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 
+			motorcomm,auto-sleep-disabled;
 			motorcomm,clk-out-frequency-hz = <125000000>;
 			motorcomm,keep-pll-enabled;
-			motorcomm,auto-sleep-disabled;
+			motorcomm,rx-clk-drv-microamp = <5020>;
+			motorcomm,rx-data-drv-microamp = <5020>;
 
 			pinctrl-0 = <&eth_phy_reset_pin>;
 			pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index 018a3a5075c7..d9905a08c6ce 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -186,8 +186,8 @@
 	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <1>;
 		clock-output-names = "xin32k", "rk805-clkout2";
 		gpio-controller;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index e729e7a22b23..126165ba1ea2 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -668,7 +668,7 @@
 
 	vdec: video-codec@ff360000 {
 		compatible = "rockchip,rk3328-vdec", "rockchip,rk3399-vdec";
-		reg = <0x0 0xff360000 0x0 0x400>;
+		reg = <0x0 0xff360000 0x0 0x480>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>,
 			 <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
@@ -743,11 +743,20 @@
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+
 				hdmi_in_vop: endpoint {
 					remote-endpoint = <&vop_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
@@ -813,8 +822,8 @@
 			<0>, <24000000>,
 			<24000000>, <24000000>,
 			<15000000>, <15000000>,
-			<100000000>, <100000000>,
-			<100000000>, <100000000>,
+			<300000000>, <100000000>,
+			<400000000>, <100000000>,
 			<50000000>, <100000000>,
 			<100000000>, <100000000>,
 			<50000000>, <50000000>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3368.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index a4c5aaf1f457..cac58ad951b2 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -790,6 +790,7 @@
 		dma-names = "tx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spdif_tx>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -801,6 +802,7 @@
 		clocks = <&cru SCLK_I2S_2CH>, <&cru HCLK_I2S_2CH>;
 		dmas = <&dmac_bus 6>, <&dmac_bus 7>;
 		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -814,6 +816,7 @@
 		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s_8ch_bus>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 5c1929d41cc0..cacbad35cfc8 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -509,8 +509,7 @@ ap_i2c_tp: &i2c5 {
 &pci_rootport {
 	mvl_wifi: wifi@0,0 {
 		compatible = "pci1b4b,2b42";
-		reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
-		       0x83010000 0x0 0x00100000 0x0 0x00100000>;
+		reg = <0x0000 0x0 0x0 0x0 0x0>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
index 853e88455e75..9e4b12ed62cb 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
@@ -34,8 +34,8 @@
 &pci_rootport {
 	wifi@0,0 {
 		compatible = "qcom,ath10k";
-		reg = <0x00010000 0x0 0x00000000 0x0 0x00000000>,
-		      <0x03010010 0x0 0x00000000 0x0 0x00200000>;
+		reg = <0x00000000 0x0 0x00000000 0x0 0x00000000>,
+		      <0x03000010 0x0 0x00000000 0x0 0x00200000>;
 		qcom,ath10k-calibration-variant = "GO_DUMO";
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index c9bf1d5c3a42..3cd63d1e8f15 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -450,7 +450,7 @@ ap_i2c_audio: &i2c8 {
 			dlg,btn-cfg = <50>;
 			dlg,mic-det-thr = <500>;
 			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-det-rate = "32_64";
 			dlg,jack-rem-deb = <1>;
 
 			dlg,a-d-btn-thr = <0xa>;
@@ -489,6 +489,7 @@ ap_i2c_audio: &i2c8 {
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
+		device_type = "pci";
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index 054c6a4d1a45..294eb2de263d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -779,7 +779,6 @@
 };
 
 &pcie0 {
-	bus-scan-delay-ms = <1000>;
 	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 20e3f41efe97..f2ca5d30d223 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -401,16 +401,22 @@
 	gpio1830-supply = <&vcc_1v8>;
 };
 
-&pmu_io_domains {
-	status = "okay";
-	pmu1830-supply = <&vcc_1v8>;
-};
-
-&pwm2 {
-	status = "okay";
+&pcie_clkreqn_cpm {
+	rockchip,pins =
+		<2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
 };
 
 &pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&q7_thermal_pin>;
+
+	gpios {
+		q7_thermal_pin: q7-thermal-pin {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	i2c8 {
 		i2c8_xfer_a: i2c8-xfer {
 			rockchip,pins =
@@ -443,11 +449,20 @@
 	usb3 {
 		usb3_id: usb3-id {
 			rockchip,pins =
-			  <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+			  <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 };
 
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&pwm2 {
+	status = "okay";
+};
+
 &sdhci {
 	/*
 	 * Signal integrity isn't great at 200MHz but 100MHz has proven stable
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 5bc2d4faeea6..fb1ea84c2b14 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1109,7 +1109,9 @@
 			power-domain@RK3399_PD_VDU {
 				reg = <RK3399_PD_VDU>;
 				clocks = <&cru ACLK_VDU>,
-					 <&cru HCLK_VDU>;
+					 <&cru HCLK_VDU>,
+					 <&cru SCLK_VDU_CA>,
+					 <&cru SCLK_VDU_CORE>;
 				pm_qos = <&qos_video_m1_r>,
 					 <&qos_video_m1_w>;
 				#power-domain-cells = <0>;
@@ -1385,7 +1387,7 @@
 
 	vdec: video-codec@ff660000 {
 		compatible = "rockchip,rk3399-vdec";
-		reg = <0x0 0xff660000 0x0 0x400>;
+		reg = <0x0 0xff660000 0x0 0x480>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
 			 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
@@ -1951,6 +1953,7 @@
 	hdmi: hdmi@ff940000 {
 		compatible = "rockchip,rk3399-dw-hdmi";
 		reg = <0x0 0xff940000 0x0 0x20000>;
+		reg-io-width = <4>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
@@ -1959,13 +1962,16 @@
 			 <&cru PLL_VPLL>;
 		clock-names = "iahb", "isfr", "cec", "grf", "ref";
 		power-domains = <&power RK3399_PD_HDCP>;
-		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
 		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1978,6 +1984,10 @@
 					remote-endpoint = <&vopl_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
index 1c6d83b47cd2..6ecdf5d28339 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
@@ -455,7 +455,7 @@
 &pinctrl {
 	leds {
 		sys_led_pin: sys-status-led-pin {
-			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
index 2d92713be2a0..6195937aa6dc 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -289,7 +289,7 @@
 				regulator-name = "vdd_gpu";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
+				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-ramp-delay = <6001>;
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index 938092fce186..68a72ac24cd4 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -268,7 +268,7 @@
 		vcc9-supply = <&vcc3v3_sys>;
 
 		codec {
-			mic-in-differential;
+			rockchip,mic-in-differential;
 		};
 
 		regulators {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index f9127ddfbb7d..dc5892d25c10 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -416,6 +416,8 @@
 
 			vccio_sd: LDO_REG5 {
 				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 
@@ -525,9 +527,9 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	switch@0 {
+	switch@1f {
 		compatible = "mediatek,mt7531";
-		reg = <0>;
+		reg = <0x1f>;
 
 		ports {
 			#address-cells = <1>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 19f8fc369b13..8c3ab07d3807 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -475,7 +475,7 @@
 		};
 
 		codec {
-			mic-in-differential;
+			rockchip,mic-in-differential;
 		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
index 58ab7e9971db..b5e67990dd0f 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
@@ -11,6 +11,10 @@
 	};
 };
 
+&pmu_io_domains {
+	vccio3-supply = <&vccio_sd>;
+};
+
 &sdmmc0 {
 	bus-width = <4>;
 	cap-mmc-highspeed;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
index 89e84e3a9262..25c49bdbadbc 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
@@ -39,9 +39,9 @@
 		};
 	};
 
-	dc_12v: dc-12v-regulator {
+	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
+		regulator-name = "vcc12v_dcin";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <12000000>;
@@ -65,7 +65,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&vcc12v_dcin>;
 	};
 
 	vcc5v0_sys: vcc5v0-sys-regulator {
@@ -75,16 +75,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb_host";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
 	};
 
 	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
@@ -94,8 +85,9 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_usb_otg_en>;
 		regulator-name = "vcc5v0_usb_otg";
-		regulator-always-on;
-		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
 	};
 };
 
@@ -123,6 +115,10 @@
 	cpu-supply = <&vdd_cpu>;
 };
 
+&display_subsystem {
+	status = "disabled";
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu>;
 	status = "okay";
@@ -405,8 +401,8 @@
 &pmu_io_domains {
 	pmuio1-supply = <&vcc3v3_pmu>;
 	pmuio2-supply = <&vcc3v3_pmu>;
-	vccio1-supply = <&vccio_acodec>;
-	vccio3-supply = <&vccio_sd>;
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vcc_1v8>;
 	vccio4-supply = <&vcc_1v8>;
 	vccio5-supply = <&vcc_3v3>;
 	vccio6-supply = <&vcc_1v8>;
@@ -429,28 +425,12 @@
 	status = "okay";
 };
 
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
 &usb_host0_xhci {
 	dr_mode = "host";
 	extcon = <&usb2phy0>;
 	status = "okay";
 };
 
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
 &usb_host1_xhci {
 	status = "okay";
 };
@@ -460,7 +440,7 @@
 };
 
 &usb2phy0_host {
-	phy-supply = <&vcc5v0_usb_host>;
+	phy-supply = <&vcc5v0_sys>;
 	status = "okay";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
index e1fe5e442689..ce2a5e1ccefc 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
@@ -39,7 +39,7 @@
 		     &gmac0_rx_bus2
 		     &gmac0_rgmii_clk
 		     &gmac0_rgmii_bus>;
-	snps,reset-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	/* Reset time is 15ms, 50ms for rtl8211f */
 	snps,reset-delays-us = <0 15000 50000>;
@@ -61,7 +61,7 @@
 		     &gmac1m1_rx_bus2
 		     &gmac1m1_rgmii_clk
 		     &gmac1m1_rgmii_bus>;
-	snps,reset-gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+	snps,reset-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	/* Reset time is 15ms, 50ms for rtl8211f */
 	snps,reset-delays-us = <0 15000 50000>;
@@ -71,18 +71,18 @@
 };
 
 &mdio0 {
-	rgmii_phy0: ethernet-phy@0 {
+	rgmii_phy0: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
+		reg = <0x1>;
 		pinctrl-0 = <&eth_phy0_reset_pin>;
 		pinctrl-names = "default";
 	};
 };
 
 &mdio1 {
-	rgmii_phy1: ethernet-phy@0 {
+	rgmii_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
+		reg = <0x1>;
 		pinctrl-0 = <&eth_phy1_reset_pin>;
 		pinctrl-names = "default";
 	};
@@ -102,6 +102,10 @@
 	};
 };
 
+&pmu_io_domains {
+	vccio3-supply = <&vcc_3v3>;
+};
+
 &sdhci {
 	bus-width = <8>;
 	max-frequency = <200000000>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index e05ab11981f5..17830e8c9a59 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -530,10 +530,6 @@
 				};
 			};
 		};
-
-		codec {
-			mic-in-differential;
-		};
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index abee88911982..2f885bc3665b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -597,6 +597,7 @@
 		compatible = "rockchip,rk3568-vpu";
 		reg = <0x0 0xfdea0000 0x0 0x800>;
 		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vdpu";
 		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 		clock-names = "aclk", "hclk";
 		iommus = <&vdpu_mmu>;
@@ -748,6 +749,7 @@
 		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
+		power-domains = <&power RK3568_PD_VO>;
 		status = "disabled";
 	};
 
@@ -970,7 +972,7 @@
 			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "sys", "pmc", "msi", "legacy", "err";
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
 		bus-range = <0x0 0xf>;
 		clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
 			 <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
@@ -1116,7 +1118,7 @@
 		dmas = <&dmac1 4>, <&dmac1 5>;
 		dma-names = "tx", "rx";
 		resets = <&cru SRST_M_I2S2_2CH>;
-		reset-names = "m";
+		reset-names = "tx-m";
 		rockchip,grf = <&grf>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2m0_sclktx
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
index 229a9111f5eb..fa8286a325af 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -215,6 +215,7 @@
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
index 0bd80e515754..97af4f912828 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
@@ -137,6 +137,18 @@
 		vin-supply = <&vcc5v0_sys>;
 	};
 
+	vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_m2_1_pwren>;
+		regulator-name = "vcc3v3_pcie2x1l0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vcc3v3_pcie30: vcc3v3-pcie30-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -421,6 +433,14 @@
 	status = "okay";
 };
 
+&pcie2x1l1 {
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_1_rst>;
+	status = "okay";
+};
+
 &pcie2x1l2 {
 	reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc_3v3_pcie20>;
@@ -467,6 +487,10 @@
 			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
+		pcie2_1_rst: pcie2-1-rst {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
 		pcie2_2_rst: pcie2-2-rst {
 			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
@@ -474,6 +498,10 @@
 		pcie_m2_0_pwren: pcie-m20-pwren {
 			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
+
+		pcie_m2_1_pwren: pcie-m21-pwren {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 
 	usb {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
index d1503a4b233a..9299fa7e3e21 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -163,13 +163,13 @@
 
 &gpio1 {
 	gpio-line-names = /* GPIO1 A0-A7 */
-			  "HEADER_27_3v3", "HEADER_28_3v3", "", "",
+			  "HEADER_27_3v3", "", "", "",
 			  "HEADER_29_1v8", "", "HEADER_7_1v8", "",
 			  /* GPIO1 B0-B7 */
 			  "", "HEADER_31_1v8", "HEADER_33_1v8", "",
 			  "HEADER_11_1v8", "HEADER_13_1v8", "", "",
 			  /* GPIO1 C0-C7 */
-			  "", "", "", "",
+			  "", "HEADER_28_3v3", "", "",
 			  "", "", "", "",
 			  /* GPIO1 D0-D7 */
 			  "", "", "", "",
@@ -193,11 +193,11 @@
 
 &gpio4 {
 	gpio-line-names = /* GPIO4 A0-A7 */
-			  "", "", "HEADER_37_3v3", "HEADER_32_3v3",
-			  "HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3",
+			  "", "", "HEADER_37_3v3", "HEADER_8_3v3",
+			  "HEADER_10_3v3", "", "HEADER_32_3v3", "HEADER_35_3v3",
 			  /* GPIO4 B0-B7 */
 			  "", "", "", "HEADER_40_3v3",
-			  "HEADER_8_3v3", "HEADER_10_3v3", "", "",
+			  "HEADER_38_3v3", "HEADER_36_3v3", "", "",
 			  /* GPIO4 C0-C7 */
 			  "", "", "", "",
 			  "", "", "", "",
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi
index 48181671eacb..0933652bafc3 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi
@@ -369,7 +369,7 @@
 		emmc_data_strobe: emmc-data-strobe {
 			rockchip,pins =
 				/* emmc_data_strobe */
-				<2 RK_PA2 1 &pcfg_pull_none>;
+				<2 RK_PA2 1 &pcfg_pull_down>;
 		};
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index 8347adcbd003..68763714f7f7 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -390,6 +390,7 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3588s.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 5544f66c6ff4..aa18cf1d1afa 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -890,6 +890,7 @@
 				reg = <RK3588_PD_USB>;
 				clocks = <&cru PCLK_PHP_ROOT>,
 					 <&cru ACLK_USB_ROOT>,
+					 <&cru ACLK_USB>,
 					 <&cru HCLK_USB_ROOT>,
 					 <&cru HCLK_HOST0>,
 					 <&cru HCLK_HOST_ARB0>,
@@ -1541,7 +1542,6 @@
 		dmas = <&dmac1 0>, <&dmac1 1>;
 		dma-names = "tx", "rx";
 		power-domains = <&power RK3588_PD_AUDIO>;
-		rockchip,trcm-sync-tx-only;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2m1_lrck
 			     &i2s2m1_sclk
@@ -1562,7 +1562,6 @@
 		dmas = <&dmac1 2>, <&dmac1 3>;
 		dma-names = "tx", "rx";
 		power-domains = <&power RK3588_PD_AUDIO>;
-		rockchip,trcm-sync-tx-only;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s3_lrck
 			     &i2s3_sclk
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/sprd/ums512.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/sprd/ums512.dtsi
index 024be594c47d..cc4459551e05 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/sprd/ums512.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/sprd/ums512.dtsi
@@ -96,7 +96,7 @@
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a55";
+			compatible = "arm,cortex-a75";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
 			cpu-idle-states = <&CORE_PD>;
@@ -104,7 +104,7 @@
 
 		CPU7: cpu@700 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a55";
+			compatible = "arm,cortex-a75";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
 			cpu-idle-states = <&CORE_PD>;
@@ -113,7 +113,7 @@
 
 	idle-states {
 		entry-method = "psci";
-		CORE_PD: core-pd {
+		CORE_PD: cpu-pd {
 			compatible = "arm,idle-state";
 			entry-latency-us = <4000>;
 			exit-latency-us = <4000>;
@@ -291,6 +291,7 @@
 			pll2: clock-controller@0 {
 				compatible = "sprd,ums512-gc-pll";
 				reg = <0x0 0x100>;
+				clocks = <&ext_26m>;
 				clock-names = "ext-26m";
 				#clock-cells = <1>;
 			};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/Makefile linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/Makefile
index e7b8e2e7f083..8bd5acc6d683 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/Makefile
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/Makefile
@@ -9,6 +9,8 @@
 # alphabetically.
 
 # Boards with AM62x SoC
+k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
@@ -19,7 +21,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
-dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am625-sk-hdmi-audio.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-hdmi-audio.dtb
 
 # Boards with AM62Ax SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
@@ -66,6 +69,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
+k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
 
 # Boards with J784s4 SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 284b90c94da8..a9b47ab92a02 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -613,6 +613,8 @@
 			interrupt-names = "host", "peripheral";
 			maximum-speed = "high-speed";
 			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
 		};
 	};
 
@@ -636,6 +638,8 @@
 			interrupt-names = "host", "peripheral";
 			maximum-speed = "high-speed";
 			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
 		};
 	};
 
@@ -743,9 +747,10 @@
 		      <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
 		      <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
 		      <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
-		      <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
+		      <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */
+		      <0x00 0x30201000 0x00 0x1000>; /* common1 */
 		reg-names = "common", "vidl1", "vid",
-			    "ovr1", "ovr2", "vp1", "vp2";
+			    "ovr1", "ovr2", "vp1", "vp2", "common1";
 		power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 186 6>,
 			 <&dss_vp1_clk>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
index 40992e7e4c30..0a5634ca005d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -60,7 +60,7 @@
 
 	memory@80000000 {
 		device_type = "memory";
-		reg = <0x00000000 0x80000000 0x00000000 0x40000000>; /* 1G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>; /* 2G RAM */
 	};
 
 	opp-table {
@@ -1061,6 +1061,7 @@
 		vddc-supply = <&reg_1v2_dsi>;
 		vddmipi-supply = <&reg_1v2_dsi>;
 		vddio-supply = <&reg_1v8_dsi>;
+		status = "disabled";
 
 		dsi_bridge_ports: ports {
 			#address-cells = <1>;
@@ -1308,8 +1309,6 @@
 	       0 0 0 0
 	>;
 	tdm-slots = <2>;
-	rx-num-evt = <32>;
-	tx-num-evt = <32>;
 	#sound-dai-cells = <0>;
 	status = "disabled";
 };
@@ -1326,8 +1325,6 @@
 	       0 0 0 0
 	>;
 	tdm-slots = <2>;
-	rx-num-evt = <32>;
-	tx-num-evt = <32>;
 	#sound-dai-cells = <0>;
 	status = "disabled";
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 7cfdf562b53b..3560349d6305 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -58,7 +58,7 @@
 
 		ramoops: ramoops@9ca00000 {
 			compatible = "ramoops";
-			reg = <0x00 0x9c700000 0x00 0x00100000>;
+			reg = <0x00 0x9ca00000 0x00 0x00100000>;
 			record-size = <0x8000>;
 			console-size = <0x8000>;
 			ftrace-size = <0x00>;
@@ -903,6 +903,4 @@
 	       0 0 0 0
 	       0 0 0 0
 	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 3198af08fb9f..de36abb243f1 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -462,7 +462,7 @@
 			     <193>, <194>, <195>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <87>;
+		ti,ngpio = <92>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 77 0>;
@@ -480,7 +480,7 @@
 			     <183>, <184>, <185>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <88>;
+		ti,ngpio = <52>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 78 0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index cff283c75f8e..99f2878de4c6 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -250,7 +250,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	exp1: gpio@22 {
 		compatible = "ti,tca6424";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am62p.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am62p.dtsi
index 294ab73ec98b..dc0a8e94e9ac 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am62p.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am62p.dtsi
@@ -71,7 +71,7 @@
 			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
 			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
 			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
-			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06408000>, /* DMSS */
 			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
 			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 677ff8de4b6e..0f8c0f6a0f57 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -481,8 +481,6 @@
 	       0 0 0 0
 	       0 0 0 0
 	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
 };
 
 &dss {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 0df54a741824..064eb062bb54 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -612,6 +612,10 @@
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x7>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@fa00000 {
@@ -623,13 +627,18 @@
 		clock-names = "clk_ahb", "clk_xin";
 		ti,trm-icp = <0x2>;
 		ti,otap-del-sel-legacy = <0x0>;
-		ti,otap-del-sel-sd-hs = <0xf>;
+		ti,otap-del-sel-sd-hs = <0x0>;
 		ti,otap-del-sel-sdr12 = <0xf>;
 		ti,otap-del-sel-sdr25 = <0xf>;
 		ti,otap-del-sel-sdr50 = <0xc>;
 		ti,otap-del-sel-sdr104 = <0x6>;
 		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
 		ti,clkbuf-sel = <0x7>;
+		status = "disabled";
 	};
 
 	cpsw3g: ethernet@8000000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index 1c2c8f0daca9..1dcbf1fe7fae 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -200,6 +200,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am642-evm.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index b4a1f73d4fb1..91d726ef7594 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -35,6 +35,7 @@
 	};
 
 	memory@80000000 {
+		bootph-all;
 		device_type = "memory";
 		/* 2G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -108,6 +109,7 @@
 
 	evm_12v0: regulator-0 {
 		/* main DC jack */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "evm_12v0";
 		regulator-min-microvolt = <12000000>;
@@ -129,6 +131,7 @@
 
 	vsys_3v3: regulator-2 {
 		/* output of LM5140 */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vsys_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -140,6 +143,7 @@
 
 	vdd_mmc1: regulator-3 {
 		/* TPS2051BD */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_mmc1";
 		regulator-min-microvolt = <3300000>;
@@ -161,6 +165,7 @@
 	};
 
 	vtt_supply: regulator-5 {
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vtt";
 		pinctrl-names = "default";
@@ -251,6 +256,7 @@
 	};
 
 	main_uart0_pins_default: main-uart0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
 			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
@@ -269,6 +275,7 @@
 	};
 
 	main_i2c0_pins_default: main-i2c0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
 			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
@@ -276,6 +283,7 @@
 	};
 
 	main_i2c1_pins_default: main-i2c1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
 			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
@@ -283,6 +291,7 @@
 	};
 
 	mdio1_pins_default: mdio1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
 			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
@@ -290,6 +299,7 @@
 	};
 
 	rgmii1_pins_default: rgmii1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
 			AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
@@ -307,6 +317,7 @@
 	};
 
        rgmii2_pins_default: rgmii2-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
 			AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
@@ -324,6 +335,7 @@
 	};
 
 	main_usb0_pins_default: main-usb0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
 		>;
@@ -366,6 +378,7 @@
 	};
 
 	ddr_vtt_pins_default: ddr-vtt-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */
 		>;
@@ -373,6 +386,7 @@
 };
 
 &main_uart0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
@@ -387,6 +401,7 @@
 };
 
 &main_i2c0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
@@ -400,12 +415,14 @@
 };
 
 &main_i2c1 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
 
 	exp1: gpio@22 {
+		bootph-all;
 		compatible = "ti,tca6424";
 		reg = <0x22>;
 		gpio-controller;
@@ -438,6 +455,10 @@
 	};
 };
 
+&main_gpio0 {
+	bootph-all;
+};
+
 /* mcu_gpio0 is reserved for mcu firmware usage */
 &mcu_gpio0 {
 	status = "reserved";
@@ -457,16 +478,19 @@
 	};
 };
 
+/* eMMC */
 &sdhci0 {
-	/* emmc */
+	status = "okay";
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
+/* SD/MMC */
 &sdhci1 {
-	/* SD/MMC */
+	bootph-all;
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	bus-width = <4>;
@@ -476,11 +500,13 @@
 };
 
 &usbss0 {
+	bootph-all;
 	ti,vbus-divider;
 	ti,usb2-only;
 };
 
 &usb0 {
+	bootph-all;
 	dr_mode = "otg";
 	maximum-speed = "high-speed";
 	pinctrl-names = "default";
@@ -488,11 +514,13 @@
 };
 
 &cpsw3g {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>;
 };
 
 &cpsw_port1 {
+	bootph-all;
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy0>;
 };
@@ -503,11 +531,13 @@
 };
 
 &cpsw3g_mdio {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio1_pins_default>;
 
 	cpsw3g_phy0: ethernet-phy@0 {
+		bootph-all;
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index 9175e96842d8..53b64e55413f 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -264,6 +264,7 @@
 };
 
 &sdhci1 {
+	status = "okay";
 	vmmc-supply = <&vcc_3v3_mmc>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am642-sk.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 722fd285a34e..bffbd234f715 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -34,6 +34,7 @@
 	};
 
 	memory@80000000 {
+		bootph-pre-ram;
 		device_type = "memory";
 		/* 2G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -107,6 +108,7 @@
 
 	vusb_main: regulator-0 {
 		/* USB MAIN INPUT 5V DC */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vusb_main5v0";
 		regulator-min-microvolt = <5000000>;
@@ -117,6 +119,7 @@
 
 	vcc_3v3_sys: regulator-1 {
 		/* output of LP8733xx */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_3v3_sys";
 		regulator-min-microvolt = <3300000>;
@@ -128,6 +131,7 @@
 
 	vdd_mmc1: regulator-2 {
 		/* TPS2051BD */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_mmc1";
 		regulator-min-microvolt = <3300000>;
@@ -234,6 +238,7 @@
 
 &main_pmx0 {
 	main_mmc1_pins_default: main-mmc1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */
 			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
@@ -248,6 +253,7 @@
 	};
 
 	main_uart0_pins_default: main-uart0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
 			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
@@ -257,6 +263,7 @@
 	};
 
 	main_uart1_pins_default: main-uart1-default-pins {
+		bootph-pre-ram;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */
 			AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */
@@ -266,12 +273,14 @@
 	};
 
 	main_usb0_pins_default: main-usb0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
 		>;
 	};
 
 	main_i2c0_pins_default: main-i2c0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
 			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
@@ -279,6 +288,7 @@
 	};
 
 	main_i2c1_pins_default: main-i2c1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
 			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
@@ -367,6 +377,7 @@
 };
 
 &main_uart0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
@@ -375,12 +386,14 @@
 
 &main_uart1 {
 	/* main_uart1 is reserved for firmware usage */
+	bootph-pre-ram;
 	status = "reserved";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart1_pins_default>;
 };
 
 &main_i2c0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
@@ -393,12 +406,14 @@
 };
 
 &main_i2c1 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
 
 	exp1: gpio@70 {
+		bootph-all;
 		compatible = "nxp,pca9538";
 		reg = <0x70>;
 		gpio-controller;
@@ -424,6 +439,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	vmmc-supply = <&wlan_en>;
 	bus-width = <4>;
 	non-removable;
@@ -443,8 +459,10 @@
 	};
 };
 
+/* SD/MMC */
 &sdhci1 {
-	/* SD/MMC */
+	bootph-all;
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	bus-width = <4>;
@@ -454,11 +472,22 @@
 };
 
 &serdes_ln_ctrl {
+	bootph-all;
 	idle-states = <AM64_SERDES0_LANE0_USB>;
 };
 
+&serdes_refclk {
+	bootph-all;
+};
+
+&serdes_wiz0 {
+	bootph-all;
+};
+
 &serdes0 {
+	bootph-all;
 	serdes0_usb_link: phy@0 {
+		bootph-all;
 		reg = <0>;
 		cdns,num-lanes = <1>;
 		#phy-cells = <0>;
@@ -468,10 +497,12 @@
 };
 
 &usbss0 {
+	bootph-all;
 	ti,vbus-divider;
 };
 
 &usb0 {
+	bootph-all;
 	dr_mode = "host";
 	maximum-speed = "super-speed";
 	pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
index 04c15b64f0b7..76ff44e71ec1 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -420,7 +420,6 @@
 	ti,driver-strength-ohm = <50>;
 	ti,fails-without-test-cd;
 	/* Enabled by overlay */
-	status = "disabled";
 };
 
 &tscadc0 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
index 6229849b5d96..65dbbff64ed9 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
@@ -207,6 +207,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	non-removable;
 	disable-wp;
 	no-sdio;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index ba1c14a54acf..b849648d51f9 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -14,6 +14,16 @@
 
 / {
 	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &main_i2c0;
+		i2c3 = &main_i2c1;
+		i2c4 = &main_i2c2;
+		i2c5 = &main_i2c3;
 		spi0 = &mcu_spi0;
 		mmc0 = &sdhci1;
 		mmc1 = &sdhci0;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index bc460033a37a..57befcce93b9 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -1013,9 +1013,10 @@
 		      <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
 		      <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
 		      <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
-		      <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+		      <0x0 0x04a0b000 0x0 0x1000>, /* vp2 */
+		      <0x0 0x04a01000 0x0 0x1000>; /* common1 */
 		reg-names = "common", "vidl1", "vid",
-			"ovr1", "ovr2", "vp1", "vp2";
+			"ovr1", "ovr2", "vp1", "vp2", "common1";
 
 		ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
 
@@ -1034,7 +1035,7 @@
 		assigned-clocks = <&k3_clks 67 2>;
 		assigned-clock-parents = <&k3_clks 67 5>;
 
-		interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 
 		dma-coherent;
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index cee2b4b0eb87..7a0c599f2b1c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -91,24 +91,25 @@
 };
 
 &wkup_pmx0 {
+};
+
+&wkup_pmx2 {
 	mcu_uart0_pins_default: mcu-uart0-default-pins {
 		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
-			J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
-			J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
-			J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
+			J721E_WKUP_IOPAD(0x90, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0x94, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
+			J721E_WKUP_IOPAD(0x8c, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0x88, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
 		>;
 	};
 
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
-			J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0x4c, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
 		>;
 	};
-};
 
-&wkup_pmx2 {
 	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
@@ -210,7 +211,6 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_uart0_pins_default>;
-	clock-frequency = <96000000>;
 };
 
 &main_uart0 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index c6b85bbf9a17..1ba1f53c72d0 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -190,8 +190,6 @@
 &wkup_pmx2 {
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */
-			J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */
 			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
 			J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
 		>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 2ddad9318554..71324fec415a 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -652,7 +652,7 @@
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0x42040000 0x0 0x350>,
 		      <0x00 0x42050000 0x0 0x350>;
-		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
+		power-domains = <&k3_pds 180 TI_SCI_PD_SHARED>;
 		#thermal-sensor-cells = <1>;
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index 5991c2e1d994..39f99ee39dab 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -296,8 +296,6 @@
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */
-			J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */
 			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
 			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
 		>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index 4ab4018d3695..8d26daf7fa3d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -616,7 +616,7 @@
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0x42040000 0x00 0x350>,
 		      <0x00 0x42050000 0x00 0x350>;
-		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
+		power-domains = <&k3_pds 243 TI_SCI_PD_SHARED>;
 		#thermal-sensor-cells = <1>;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/xilinx/Makefile linux-libre-6.6.46-gnu/arch/arm64/boot/dts/xilinx/Makefile
index 5e40c0b4fa0a..1068b0fa8e98 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/xilinx/Makefile
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/xilinx/Makefile
@@ -22,11 +22,10 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA.dtb
 
 zynqmp-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revA.dtb
 zynqmp-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revB.dtb
 zynqmp-smk-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revA.dtb
 zynqmp-smk-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
-
-zynqmp-sm-k26-revA-sck-kr-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
-zynqmp-sm-k26-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
-zynqmp-smk-k26-revA-sck-kr-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
-zynqmp-smk-k26-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revB.dtb
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso linux-libre-6.6.46-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index ae1b9b2bdbee..92f4190d564d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -21,57 +21,57 @@
 /dts-v1/;
 /plugin/;
 
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	/* u14 - 0x40 - ina260 */
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
-	si5332_0: si5332_0 { /* u17 */
+&{/} {
+	si5332_0: si5332-0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
 
-	si5332_1: si5332_1 { /* u17 */
+	si5332_1: si5332-1 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	si5332_2: si5332_2 { /* u17 */
+	si5332_2: si5332-2 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
 
-	si5332_3: si5332_3 { /* u17 */
+	si5332_3: si5332-3 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
 
-	si5332_4: si5332_4 { /* u17 */
+	si5332_4: si5332-4 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5332_5: si5332_5 { /* u17 */
+	si5332_5: si5332-5 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 and SATA */
 &psgtr {
 	status = "okay";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso linux-libre-6.6.46-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index b59e48be6465..f88b71f5b07a 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -16,58 +16,58 @@
 /dts-v1/;
 /plugin/;
 
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	/* u14 - 0x40 - ina260 */
-	/* u43 - 0x2d - usb5744 */
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
-	si5332_0: si5332_0 { /* u17 */
+&{/} {
+	si5332_0: si5332-0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
 
-	si5332_1: si5332_1 { /* u17 */
+	si5332_1: si5332-1 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	si5332_2: si5332_2 { /* u17 */
+	si5332_2: si5332-2 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
 
-	si5332_3: si5332_3 { /* u17 */
+	si5332_3: si5332-3 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
 
-	si5332_4: si5332_4 { /* u17 */
+	si5332_4: si5332-4 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5332_5: si5332_5 { /* u17 */
+	si5332_5: si5332-5 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u43 - 0x2d - usb5744 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 */
 &psgtr {
 	status = "okay";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/install.sh linux-libre-6.6.46-gnu/arch/arm64/boot/install.sh
index 7399d706967a..9b7a09808a3d 100755
--- linux-libre-6.6-gnu/arch/arm64/boot/install.sh
+++ linux-libre-6.6.46-gnu/arch/arm64/boot/install.sh
@@ -17,7 +17,8 @@
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
 
-if [ "$(basename $2)" = "Image.gz" ]; then
+if [ "$(basename $2)" = "Image.gz" ] || [ "$(basename $2)" = "vmlinuz.efi" ]
+then
 # Compressed install
   echo "Installing compressed kernel"
   base=vmlinuz
diff --git linux-libre-6.6-gnu/arch/arm64/configs/defconfig linux-libre-6.6.46-gnu/arch/arm64/configs/defconfig
index a789119e6483..60af93c04b45 100644
--- linux-libre-6.6-gnu/arch/arm64/configs/defconfig
+++ linux-libre-6.6.46-gnu/arch/arm64/configs/defconfig
@@ -623,6 +623,7 @@ CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_UNIPHIER=y
 CONFIG_GPIO_VISCONTI=y
 CONFIG_GPIO_WCD934X=m
+CONFIG_GPIO_VF610=y
 CONFIG_GPIO_XGENE=y
 CONFIG_GPIO_XGENE_SB=y
 CONFIG_GPIO_MAX732X=y
diff --git linux-libre-6.6-gnu/arch/arm64/crypto/aes-neonbs-glue.c linux-libre-6.6.46-gnu/arch/arm64/crypto/aes-neonbs-glue.c
index bac4cabef607..467ac2f768ac 100644
--- linux-libre-6.6-gnu/arch/arm64/crypto/aes-neonbs-glue.c
+++ linux-libre-6.6.46-gnu/arch/arm64/crypto/aes-neonbs-glue.c
@@ -227,8 +227,19 @@ static int ctr_encrypt(struct skcipher_request *req)
 			src += blocks * AES_BLOCK_SIZE;
 		}
 		if (nbytes && walk.nbytes == walk.total) {
+			u8 buf[AES_BLOCK_SIZE];
+			u8 *d = dst;
+
+			if (unlikely(nbytes < AES_BLOCK_SIZE))
+				src = dst = memcpy(buf + sizeof(buf) - nbytes,
+						   src, nbytes);
+
 			neon_aes_ctr_encrypt(dst, src, ctx->enc, ctx->key.rounds,
 					     nbytes, walk.iv);
+
+			if (unlikely(nbytes < AES_BLOCK_SIZE))
+				memcpy(d, dst, nbytes);
+
 			nbytes = 0;
 		}
 		kernel_neon_end();
diff --git linux-libre-6.6-gnu/arch/arm64/include/asm/alternative-macros.h linux-libre-6.6.46-gnu/arch/arm64/include/asm/alternative-macros.h
index 94b486192e1f..a3652b6bb740 100644
--- linux-libre-6.6-gnu/arch/arm64/include/asm/alternative-macros.h
+++ linux-libre-6.6.46-gnu/arch/arm64/include/asm/alternative-macros.h
@@ -229,7 +229,7 @@ alternative_has_cap_likely(const unsigned long cpucap)
 	compiletime_assert(cpucap < ARM64_NCAPS,
 			   "cpucap must be < ARM64_NCAPS");
 
-	asm_volatile_goto(
+	asm goto(
 	ALTERNATIVE_CB("b	%l[l_no]", %[cpucap], alt_cb_patch_nops)
 	:
 	: [cpucap] "i" (cpucap)
@@ -247,7 +247,7 @@ alternative_has_cap_unlikely(const unsigned long cpucap)
 	compiletime_assert(cpucap < ARM64_NCAPS,
 			   "cpucap must be < ARM64_NCAPS");
 
-	asm_volatile_goto(
+	asm goto(
 	ALTERNATIVE("nop", "b	%l[l_yes]", %[cpucap])
 	:
 	: [cpucap] "i" (cpucap)
diff --git linux-libre-6.6-gnu/arch/arm64/include/asm/arm_pmuv3.h linux-libre-6.6.46-gnu/arch/arm64/include/asm/arm_pmuv3.h
index 18dc2fb3d7b7..c27404fa4418 100644
--- linux-libre-6.6-gnu/arch/arm64/include/asm/arm_pmuv3.h
+++ linux-libre-6.6.46-gnu/arch/arm64/include/asm/arm_pmuv3.h
@@ -46,12 +46,12 @@ static inline u32 read_pmuver(void)
 			ID_AA64DFR0_EL1_PMUVer_SHIFT);
 }
 
-static inline void write_pmcr(u32 val)
+static inline void write_pmcr(u64 val)
 {
 	write_sysreg(val, pmcr_el0);
 }
 
-static inline u32 read_pmcr(void)
+static inline u64 read_pmcr(void)
 {
 	return read_sysreg(pmcr_el0);
 }
@@ -71,21 +71,6 @@ static inline u64 read_pmccntr(void)
 	return read_sysreg(pmccntr_el0);
 }
 
-static inline void write_pmxevcntr(u32 val)
-{
-	write_sysreg(val, pmxevcntr_el0);
-}
-
-static inline u32 read_pmxevcntr(void)
-{
-	return read_sysreg(pmxevcntr_el0);
-}
-
-static inline void write_pmxevtyper(u32 val)
-{
-	write_sysreg(val, pmxevtyper_el0);
-}
-
 static inline void write_pmcntenset(u32 val)
 {
 	write_sysreg(val, pmcntenset_el0);
@@ -106,7 +91,7 @@ static inline void write_pmintenclr(u32 val)
 	write_sysreg(val, pmintenclr_el1);
 }
 
-static inline void write_pmccfiltr(u32 val)
+static inline void write_pmccfiltr(u64 val)
 {
 	write_sysreg(val, pmccfiltr_el0);
 }
@@ -126,12 +111,12 @@ static inline void write_pmuserenr(u32 val)
 	write_sysreg(val, pmuserenr_el0);
 }
 
-static inline u32 read_pmceid0(void)
+static inline u64 read_pmceid0(void)
 {
 	return read_sysreg(pmceid0_el0);
 }
 
-static inline u32 read_pmceid1(void)
+static inline u64 read_pmceid1(void)
 {
 	return read_sysreg(pmceid1_el0);
 }
diff --git linux-libre-6.6-gnu/arch/arm64/include/asm/asm-bug.h linux-libre-6.6.46-gnu/arch/arm64/include/asm/asm-bug.h
index c762038ba400..6e73809f6492 100644
--- linux-libre-6.6-gnu/arch/arm64/include/asm/asm-bug.h
+++ linux-libre-6.6.46-gnu/arch/arm64/include/asm/asm-bug.h
@@ -28,6 +28,7 @@
 	14470:	.long 14471f - .;			\
 _BUGVERBOSE_LOCATION(__FILE__, __LINE__)		\
 		.short flags; 				\
+		.align 2;				\
 		.popsection;				\
 	14471:
 #else
diff --git linux-libre-6.6-gnu/arch/arm64/include/asm/barrier.h linux-libre-6.6.46-gnu/arch/arm64/include/asm/barrier.h
index cf2987464c18..1ca947d5c939 100644
--- linux-libre-6.6-gnu/arch/arm64/include/asm/barrier.h
+++ linux-libre-6.6.46-gnu/arch/arm64/include/asm/barrier.h
@@ -40,6 +40,10 @@
  */
 #define dgh()		asm volatile("hint #6" : : : "memory")
 
+#define spec_bar()	asm volatile(ALTERNATIVE("dsb nsh\nisb\n",		\
+						 SB_BARRIER_INSN"nop\n",	\
+						 ARM64_HAS_SB))
+
 #ifdef CONFIG_ARM64_PSEUDO_NMI
 #define pmr_sync()						\
 	do {							\
diff --git linux-libre-6.6-gnu/arch/arm64/include/asm/cputype.h linux-libre-6.6.46-gnu/arch/arm64/include/asm/cputype.h
index 74d00feb62f0..5fd7caea4419 100644
--- linux-libre-6.6-gnu/arch/arm64/include/asm/cputype.h
+++ linux-libre-6.6.46-gnu/arch/arm64/include/asm/cputype.h
@@ -61,6 +61,7 @@
 #define ARM_CPU_IMP_HISI		0x48
 #define ARM_CPU_IMP_APPLE		0x61
 #define ARM_CPU_IMP_AMPERE		0xC0
+#define ARM_CPU_IMP_MICROSOFT		0x6D
 
 #define ARM_CPU_PART_AEM_V8		0xD0F
 #define ARM_CPU_PART_FOUNDATION		0xD00
@@ -85,8 +86,17 @@
 #define ARM_CPU_PART_CORTEX_X2		0xD48
 #define ARM_CPU_PART_NEOVERSE_N2	0xD49
 #define ARM_CPU_PART_CORTEX_A78C	0xD4B
-
-#define APM_CPU_PART_POTENZA		0x000
+#define ARM_CPU_PART_CORTEX_X1C		0xD4C
+#define ARM_CPU_PART_CORTEX_X3		0xD4E
+#define ARM_CPU_PART_NEOVERSE_V2	0xD4F
+#define ARM_CPU_PART_CORTEX_A720	0xD81
+#define ARM_CPU_PART_CORTEX_X4		0xD82
+#define ARM_CPU_PART_NEOVERSE_V3	0xD84
+#define ARM_CPU_PART_CORTEX_X925	0xD85
+#define ARM_CPU_PART_CORTEX_A725	0xD87
+
+#define APM_CPU_PART_XGENE		0x000
+#define APM_CPU_VAR_POTENZA		0x00
 
 #define CAVIUM_CPU_PART_THUNDERX	0x0A1
 #define CAVIUM_CPU_PART_THUNDERX_81XX	0x0A2
@@ -134,6 +144,8 @@
 
 #define AMPERE_CPU_PART_AMPERE1		0xAC3
 
+#define MICROSOFT_CPU_PART_AZURE_COBALT_100	0xD49 /* Based on r0p0 of ARM Neoverse N2 */
+
 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
 #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
 #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72)
@@ -155,6 +167,14 @@
 #define MIDR_CORTEX_X2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X2)
 #define MIDR_NEOVERSE_N2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N2)
 #define MIDR_CORTEX_A78C	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78C)
+#define MIDR_CORTEX_X1C	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X1C)
+#define MIDR_CORTEX_X3 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X3)
+#define MIDR_NEOVERSE_V2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V2)
+#define MIDR_CORTEX_A720 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A720)
+#define MIDR_CORTEX_X4 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X4)
+#define MIDR_NEOVERSE_V3 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V3)
+#define MIDR_CORTEX_X925 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X925)
+#define MIDR_CORTEX_A725 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A725)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
 #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)
@@ -192,6 +212,7 @@
 #define MIDR_APPLE_M2_BLIZZARD_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_BLIZZARD_MAX)
 #define MIDR_APPLE_M2_AVALANCHE_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_AVALANCHE_MAX)
 #define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1)
+#define MIDR_MICROSOFT_AZURE_COBALT_100 MIDR_CPU_MODEL(ARM_CPU_IMP_MICROSOFT, MICROSOFT_CPU_PART_AZURE_COBALT_100)
 
 /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */
 #define MIDR_FUJITSU_ERRATUM_010001		MIDR_FUJITSU_A64FX
diff --git linux-libre-6.6-gnu/arch/arm64/include/asm/fpsimd.h linux-libre-6.6.46-gnu/arch/arm64/include/asm/fpsimd.h
index 8df46f186c64..7415c63b4187 100644
--- linux-libre-6.6-gnu/arch/arm64/include/asm/fpsimd.h
+++ linux-libre-6.6.46-gnu/arch/arm64/include/asm/fpsimd.h
@@ -36,13 +36,13 @@
  * When we defined the maximum SVE vector length we defined the ABI so
  * that the maximum vector length included all the reserved for future
  * expansion bits in ZCR rather than those just currently defined by
- * the architecture. While SME follows a similar pattern the fact that
- * it includes a square matrix means that any allocations that attempt
- * to cover the maximum potential vector length (such as happen with
- * the regset used for ptrace) end up being extremely large. Define
- * the much lower actual limit for use in such situations.
+ * the architecture.  Using this length to allocate worst size buffers
+ * results in excessively large allocations, and this effect is even
+ * more pronounced for SME due to ZA.  Define more suitable VLs for
+ * these situations.
  */
-#define SME_VQ_MAX	16
+#define ARCH_SVE_VQ_MAX ((ZCR_ELx_LEN_MASK >> ZCR_ELx_LEN_SHIFT) + 1)
+#define SME_VQ_MAX	((SMCR_ELx_LEN_MASK >> SMCR_ELx_LEN_SHIFT) + 1)
 
 struct task_struct;
 
@@ -360,6 +360,7 @@ extern void sme_alloc(struct task_struct *task, bool flush);
 extern unsigned int sme_get_vl(void);
 extern int sme_set_current_vl(unsigned long arg);
 extern int sme_get_current_vl(void);
+extern void sme_suspend_exit(void);
 
 /*
  * Return how many bytes of memory are required to store the full SME
@@ -395,6 +396,7 @@ static inline int sme_max_vl(void) { return 0; }
 static inline int sme_max_virtualisable_vl(void) { return 0; }
 static inline int sme_set_current_vl(unsigned long arg) { return -EINVAL; }
 static inline int sme_get_current_vl(void) { return -EINVAL; }
+static inline void sme_suspend_exit(void) { }
 
 static inline size_t sme_state_size(struct task_struct const *task)
 {
diff --git linux-libre-6.6-gnu/arch/arm64/include/asm/irq_work.h linux-libre-6.6.46-gnu/arch/arm64/include/asm/irq_work.h
index 81bbfa3a035b..a1020285ea75 100644
--- linux-libre-6.6-gnu/arch/arm64/include/asm/irq_work.h
+++ linux-libre-6.6.46-gnu/arch/arm64/include/asm/irq_work.h
@@ -2,8 +2,6 @@
 #ifndef __ASM_IRQ_WORK_H
 #define __ASM_IRQ_WORK_H
 
-extern void arch_irq_work_raise(void);
-
 static inline bool arch_irq_work_has_interrupt(void)
 {
 	return true;
diff --git linux-libre-6.6-gnu/arch/arm64/include/asm/jump_label.h linux-libre-6.6.46-gnu/arch/arm64/include/asm/jump_label.h
index 48ddc0f45d22..4b9915915082 100644
--- linux-libre-6.6-gnu/arch/arm64/include/asm/jump_label.h
+++ linux-libre-6.6.46-gnu/arch/arm64/include/asm/jump_label.h
@@ -13,12 +13,13 @@
 #include <linux/types.h>
 #include <asm/insn.h>
 
+#define HAVE_JUMP_LABEL_BATCH
 #define JUMP_LABEL_NOP_SIZE		AARCH64_INSN_SIZE
 
 static __always_inline bool arch_static_branch(struct static_key * const key,
 					       const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	nop					\n\t"
 		 "	.pushsection	__jump_table, \"aw\"	\n\t"
 		 "	.align		3			\n\t"
@@ -35,7 +36,7 @@ l_yes:
 static __always_inline bool arch_static_branch_jump(struct static_key * const key,
 						    const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	b		%l[l_yes]		\n\t"
 		 "	.pushsection	__jump_table, \"aw\"	\n\t"
 		 "	.align		3			\n\t"
diff --git linux-libre-6.6-gnu/arch/arm64/include/asm/pgtable.h linux-libre-6.6.46-gnu/arch/arm64/include/asm/pgtable.h
index 7f7d9b1df4e5..07bdf5dd8ebe 100644
--- linux-libre-6.6-gnu/arch/arm64/include/asm/pgtable.h
+++ linux-libre-6.6.46-gnu/arch/arm64/include/asm/pgtable.h
@@ -826,6 +826,12 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 		pte = set_pte_bit(pte, __pgprot(PTE_DIRTY));
 
 	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
+	/*
+	 * If we end up clearing hw dirtiness for a sw-dirty PTE, set hardware
+	 * dirtiness again.
+	 */
+	if (pte_sw_dirty(pte))
+		pte = pte_mkdirty(pte);
 	return pte;
 }
 
diff --git linux-libre-6.6-gnu/arch/arm64/include/asm/setup.h linux-libre-6.6.46-gnu/arch/arm64/include/asm/setup.h
index f4af547ef54c..2e4d7da74fb8 100644
--- linux-libre-6.6-gnu/arch/arm64/include/asm/setup.h
+++ linux-libre-6.6.46-gnu/arch/arm64/include/asm/setup.h
@@ -21,9 +21,22 @@ static inline bool arch_parse_debug_rodata(char *arg)
 	extern bool rodata_enabled;
 	extern bool rodata_full;
 
-	if (arg && !strcmp(arg, "full")) {
+	if (!arg)
+		return false;
+
+	if (!strcmp(arg, "full")) {
+		rodata_enabled = rodata_full = true;
+		return true;
+	}
+
+	if (!strcmp(arg, "off")) {
+		rodata_enabled = rodata_full = false;
+		return true;
+	}
+
+	if (!strcmp(arg, "on")) {
 		rodata_enabled = true;
-		rodata_full = true;
+		rodata_full = false;
 		return true;
 	}
 
diff --git linux-libre-6.6-gnu/arch/arm64/include/asm/syscall_wrapper.h linux-libre-6.6.46-gnu/arch/arm64/include/asm/syscall_wrapper.h
index 17f687510c48..7a0e7b59be9b 100644
--- linux-libre-6.6-gnu/arch/arm64/include/asm/syscall_wrapper.h
+++ linux-libre-6.6.46-gnu/arch/arm64/include/asm/syscall_wrapper.h
@@ -44,9 +44,6 @@
 		return sys_ni_syscall();						\
 	}
 
-#define COMPAT_SYS_NI(name) \
-	SYSCALL_ALIAS(__arm64_compat_sys_##name, sys_ni_posix_timers);
-
 #endif /* CONFIG_COMPAT */
 
 #define __SYSCALL_DEFINEx(x, name, ...)						\
@@ -82,6 +79,5 @@
 	}
 
 asmlinkage long __arm64_sys_ni_syscall(const struct pt_regs *__unused);
-#define SYS_NI(name) SYSCALL_ALIAS(__arm64_sys_##name, sys_ni_posix_timers);
 
 #endif /* __ASM_SYSCALL_WRAPPER_H */
diff --git linux-libre-6.6-gnu/arch/arm64/include/asm/tlbflush.h linux-libre-6.6.46-gnu/arch/arm64/include/asm/tlbflush.h
index b149cf9f91bc..b73baaf8ae47 100644
--- linux-libre-6.6-gnu/arch/arm64/include/asm/tlbflush.h
+++ linux-libre-6.6.46-gnu/arch/arm64/include/asm/tlbflush.h
@@ -152,12 +152,18 @@ static inline unsigned long get_trans_granule(void)
 #define MAX_TLBI_RANGE_PAGES		__TLBI_RANGE_PAGES(31, 3)
 
 /*
- * Generate 'num' values from -1 to 30 with -1 rejected by the
- * __flush_tlb_range() loop below.
+ * Generate 'num' values from -1 to 31 with -1 rejected by the
+ * __flush_tlb_range() loop below. Its return value is only
+ * significant for a maximum of MAX_TLBI_RANGE_PAGES pages. If
+ * 'pages' is more than that, you must iterate over the overall
+ * range.
  */
-#define TLBI_RANGE_MASK			GENMASK_ULL(4, 0)
-#define __TLBI_RANGE_NUM(pages, scale)	\
-	((((pages) >> (5 * (scale) + 1)) & TLBI_RANGE_MASK) - 1)
+#define __TLBI_RANGE_NUM(pages, scale)					\
+	({								\
+		int __pages = min((pages),				\
+				  __TLBI_RANGE_PAGES(31, (scale)));	\
+		(__pages >> (5 * (scale) + 1)) - 1;			\
+	})
 
 /*
  *	TLB Invalidation
@@ -351,29 +357,25 @@ static inline void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
  * entries one by one at the granularity of 'stride'. If the TLB
  * range ops are supported, then:
  *
- * 1. If 'pages' is odd, flush the first page through non-range
- *    operations;
- *
- * 2. For remaining pages: the minimum range granularity is decided
- *    by 'scale', so multiple range TLBI operations may be required.
- *    Start from scale = 0, flush the corresponding number of pages
- *    ((num+1)*2^(5*scale+1) starting from 'addr'), then increase it
- *    until no pages left.
+ * 1. The minimum range granularity is decided by 'scale', so multiple range
+ *    TLBI operations may be required. Start from scale = 3, flush the largest
+ *    possible number of pages ((num+1)*2^(5*scale+1)) that fit into the
+ *    requested range, then decrement scale and continue until one or zero pages
+ *    are left.
  *
- * Note that certain ranges can be represented by either num = 31 and
- * scale or num = 0 and scale + 1. The loop below favours the latter
- * since num is limited to 30 by the __TLBI_RANGE_NUM() macro.
+ * 2. If there is 1 page remaining, flush it through non-range operations. Range
+ *    operations can only span an even number of pages.
  */
 #define __flush_tlb_range_op(op, start, pages, stride,			\
 				asid, tlb_level, tlbi_user)		\
 do {									\
 	int num = 0;							\
-	int scale = 0;							\
+	int scale = 3;							\
 	unsigned long addr;						\
 									\
 	while (pages > 0) {						\
 		if (!system_supports_tlb_range() ||			\
-		    pages % 2 == 1) {					\
+		    pages == 1) {					\
 			addr = __TLBI_VADDR(start, asid);		\
 			__tlbi_level(op, addr, tlb_level);		\
 			if (tlbi_user)					\
@@ -393,7 +395,7 @@ do {									\
 			start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; \
 			pages -= __TLBI_RANGE_PAGES(num, scale);	\
 		}							\
-		scale++;						\
+		scale--;						\
 	}								\
 } while (0)
 
diff --git linux-libre-6.6-gnu/arch/arm64/include/asm/unistd32.h linux-libre-6.6.46-gnu/arch/arm64/include/asm/unistd32.h
index 78b68311ec81..545a4a7b5371 100644
--- linux-libre-6.6-gnu/arch/arm64/include/asm/unistd32.h
+++ linux-libre-6.6.46-gnu/arch/arm64/include/asm/unistd32.h
@@ -840,7 +840,7 @@ __SYSCALL(__NR_pselect6_time64, compat_sys_pselect6_time64)
 #define __NR_ppoll_time64 414
 __SYSCALL(__NR_ppoll_time64, compat_sys_ppoll_time64)
 #define __NR_io_pgetevents_time64 416
-__SYSCALL(__NR_io_pgetevents_time64, sys_io_pgetevents)
+__SYSCALL(__NR_io_pgetevents_time64, compat_sys_io_pgetevents_time64)
 #define __NR_recvmmsg_time64 417
 __SYSCALL(__NR_recvmmsg_time64, compat_sys_recvmmsg_time64)
 #define __NR_mq_timedsend_time64 418
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/armv8_deprecated.c linux-libre-6.6.46-gnu/arch/arm64/kernel/armv8_deprecated.c
index e459cfd33711..d6b711e56df9 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/armv8_deprecated.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/armv8_deprecated.c
@@ -464,6 +464,9 @@ static int run_all_insn_set_hw_mode(unsigned int cpu)
 	for (int i = 0; i < ARRAY_SIZE(insn_emulations); i++) {
 		struct insn_emulation *insn = insn_emulations[i];
 		bool enable = READ_ONCE(insn->current_mode) == INSN_HW;
+		if (insn->status == INSN_UNAVAILABLE)
+			continue;
+
 		if (insn->set_hw_mode && insn->set_hw_mode(enable)) {
 			pr_warn("CPU[%u] cannot support the emulation of %s",
 				cpu, insn->name);
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/cpu_errata.c linux-libre-6.6.46-gnu/arch/arm64/kernel/cpu_errata.c
index 5706e74c5578..57b1d6a68256 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/cpu_errata.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/cpu_errata.c
@@ -390,6 +390,7 @@ static const struct midr_range erratum_1463225[] = {
 static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_2139208
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2119858
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
@@ -403,6 +404,7 @@ static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
 static const struct midr_range tsb_flush_fail_cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_2067961
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2054223
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
@@ -415,6 +417,7 @@ static const struct midr_range tsb_flush_fail_cpus[] = {
 static struct midr_range trbe_write_out_of_range_cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_2253138
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2224489
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
@@ -432,6 +435,43 @@ static struct midr_range broken_aarch32_aes[] = {
 };
 #endif /* CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE */
 
+#ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+static const struct midr_range erratum_spec_unpriv_load_list[] = {
+#ifdef CONFIG_ARM64_ERRATUM_3117295
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A510),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2966298
+	/* Cortex-A520 r0p0 to r0p1 */
+	MIDR_REV_RANGE(MIDR_CORTEX_A520, 0, 0, 1),
+#endif
+	{},
+};
+#endif
+
+#ifdef CONFIG_ARM64_ERRATUM_3194386
+static const struct midr_range erratum_spec_ssbs_list[] = {
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A76),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A77),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A78),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A78C),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A720),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A725),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_X1),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_X1C),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_X2),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_X3),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_X4),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_X925),
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1),
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1),
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V2),
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V3),
+	{}
+};
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
 	{
@@ -730,12 +770,19 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.cpu_enable = cpu_clear_bf16_from_user_emulation,
 	},
 #endif
-#ifdef CONFIG_ARM64_ERRATUM_2966298
+#ifdef CONFIG_ARM64_ERRATUM_3194386
+	{
+		.desc = "SSBS not fully self-synchronizing",
+		.capability = ARM64_WORKAROUND_SPECULATIVE_SSBS,
+		ERRATA_MIDR_RANGE_LIST(erratum_spec_ssbs_list),
+	},
+#endif
+#ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
 	{
-		.desc = "ARM erratum 2966298",
-		.capability = ARM64_WORKAROUND_2966298,
+		.desc = "ARM errata 2966298, 3117295",
+		.capability = ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD,
 		/* Cortex-A520 r0p0 - r0p1 */
-		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A520, 0, 0, 1),
+		ERRATA_MIDR_RANGE_LIST(erratum_spec_unpriv_load_list),
 	},
 #endif
 #ifdef CONFIG_AMPERE_ERRATUM_AC03_CPU_38
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/cpufeature.c linux-libre-6.6.46-gnu/arch/arm64/kernel/cpufeature.c
index 444a73c2e638..7e9660455900 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/cpufeature.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/cpufeature.c
@@ -2190,6 +2190,17 @@ static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap)
 }
 #endif /* CONFIG_ARM64_MTE */
 
+static void user_feature_fixup(void)
+{
+	if (cpus_have_cap(ARM64_WORKAROUND_SPECULATIVE_SSBS)) {
+		struct arm64_ftr_reg *regp;
+
+		regp = get_arm64_ftr_reg(SYS_ID_AA64PFR1_EL1);
+		if (regp)
+			regp->user_mask &= ~ID_AA64PFR1_EL1_SSBS_MASK;
+	}
+}
+
 static void elf_hwcap_fixup(void)
 {
 #ifdef CONFIG_ARM64_ERRATUM_1742098
@@ -3345,6 +3356,7 @@ void __init setup_cpu_features(void)
 	u32 cwg;
 
 	setup_system_capabilities();
+	user_feature_fixup();
 	setup_elf_hwcaps(arm64_elf_hwcaps);
 
 	if (system_supports_32bit_el0()) {
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/entry.S linux-libre-6.6.46-gnu/arch/arm64/kernel/entry.S
index a6030913cd58..7fcbee0f6c0e 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/entry.S
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/entry.S
@@ -428,16 +428,9 @@ alternative_else_nop_endif
 	ldp	x28, x29, [sp, #16 * 14]
 
 	.if	\el == 0
-alternative_if ARM64_WORKAROUND_2966298
-	tlbi	vale1, xzr
-	dsb	nsh
-alternative_else_nop_endif
-alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
-	ldr	lr, [sp, #S_LR]
-	add	sp, sp, #PT_REGS_SIZE		// restore sp
-	eret
-alternative_else_nop_endif
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+	alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
+
 	msr	far_el1, x29
 
 	ldr_this_cpu	x30, this_cpu_vector, x29
@@ -446,7 +439,18 @@ alternative_else_nop_endif
 	ldr		lr, [sp, #S_LR]		// restore x30
 	add		sp, sp, #PT_REGS_SIZE	// restore sp
 	br		x29
+
+.L_skip_tramp_exit_\@:
 #endif
+	ldr	lr, [sp, #S_LR]
+	add	sp, sp, #PT_REGS_SIZE		// restore sp
+
+	/* This must be after the last explicit memory access */
+alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	tlbi	vale1, xzr
+	dsb	nsh
+alternative_else_nop_endif
+	eret
 	.else
 	ldr	lr, [sp, #S_LR]
 	add	sp, sp, #PT_REGS_SIZE		// restore sp
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/fpsimd.c linux-libre-6.6.46-gnu/arch/arm64/kernel/fpsimd.c
index 91e44ac7150f..5cdfcc9e3e54 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/fpsimd.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/fpsimd.c
@@ -1280,8 +1280,10 @@ void fpsimd_release_task(struct task_struct *dead_task)
  */
 void sme_alloc(struct task_struct *task, bool flush)
 {
-	if (task->thread.sme_state && flush) {
-		memset(task->thread.sme_state, 0, sme_state_size(task));
+	if (task->thread.sme_state) {
+		if (flush)
+			memset(task->thread.sme_state, 0,
+			       sme_state_size(task));
 		return;
 	}
 
@@ -1404,6 +1406,22 @@ void __init sme_setup(void)
 		get_sme_default_vl());
 }
 
+void sme_suspend_exit(void)
+{
+	u64 smcr = 0;
+
+	if (!system_supports_sme())
+		return;
+
+	if (system_supports_fa64())
+		smcr |= SMCR_ELx_FA64;
+	if (system_supports_sme2())
+		smcr |= SMCR_ELx_EZT0;
+
+	write_sysreg_s(smcr, SYS_SMCR_EL1);
+	write_sysreg_s(0, SYS_SMPRI_EL1);
+}
+
 #endif /* CONFIG_ARM64_SME */
 
 static void sve_init_regs(void)
@@ -1684,7 +1702,7 @@ void fpsimd_preserve_current_state(void)
 void fpsimd_signal_preserve_current_state(void)
 {
 	fpsimd_preserve_current_state();
-	if (test_thread_flag(TIF_SVE))
+	if (current->thread.fp_type == FP_STATE_SVE)
 		sve_to_fpsimd(current);
 }
 
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/head.S linux-libre-6.6.46-gnu/arch/arm64/kernel/head.S
index 7b236994f0e1..6517bf2644a0 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/head.S
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/head.S
@@ -569,6 +569,11 @@ SYM_INNER_LABEL(init_el2, SYM_L_LOCAL)
 	adr_l	x1, __hyp_text_end
 	adr_l	x2, dcache_clean_poc
 	blr	x2
+
+	mov_q	x0, INIT_SCTLR_EL2_MMU_OFF
+	pre_disable_mmu_workaround
+	msr	sctlr_el2, x0
+	isb
 0:
 	mov_q	x0, HCR_HOST_NVHE_FLAGS
 	msr	hcr_el2, x0
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/irq.c linux-libre-6.6.46-gnu/arch/arm64/kernel/irq.c
index 6ad5c6ef5329..85087e2df564 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/irq.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/irq.c
@@ -22,6 +22,7 @@
 #include <linux/vmalloc.h>
 #include <asm/daifflags.h>
 #include <asm/exception.h>
+#include <asm/numa.h>
 #include <asm/softirq_stack.h>
 #include <asm/stacktrace.h>
 #include <asm/vmap_stack.h>
@@ -47,17 +48,17 @@ static void init_irq_scs(void)
 
 	for_each_possible_cpu(cpu)
 		per_cpu(irq_shadow_call_stack_ptr, cpu) =
-			scs_alloc(cpu_to_node(cpu));
+			scs_alloc(early_cpu_to_node(cpu));
 }
 
 #ifdef CONFIG_VMAP_STACK
-static void init_irq_stacks(void)
+static void __init init_irq_stacks(void)
 {
 	int cpu;
 	unsigned long *p;
 
 	for_each_possible_cpu(cpu) {
-		p = arch_alloc_vmap_stack(IRQ_STACK_SIZE, cpu_to_node(cpu));
+		p = arch_alloc_vmap_stack(IRQ_STACK_SIZE, early_cpu_to_node(cpu));
 		per_cpu(irq_stack_ptr, cpu) = p;
 	}
 }
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/jump_label.c linux-libre-6.6.46-gnu/arch/arm64/kernel/jump_label.c
index faf88ec9c48e..f63ea915d6ad 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/jump_label.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/jump_label.c
@@ -7,11 +7,12 @@
  */
 #include <linux/kernel.h>
 #include <linux/jump_label.h>
+#include <linux/smp.h>
 #include <asm/insn.h>
 #include <asm/patching.h>
 
-void arch_jump_label_transform(struct jump_entry *entry,
-			       enum jump_label_type type)
+bool arch_jump_label_transform_queue(struct jump_entry *entry,
+				     enum jump_label_type type)
 {
 	void *addr = (void *)jump_entry_code(entry);
 	u32 insn;
@@ -25,4 +26,10 @@ void arch_jump_label_transform(struct jump_entry *entry,
 	}
 
 	aarch64_insn_patch_text_nosync(addr, insn);
+	return true;
+}
+
+void arch_jump_label_transform_apply(void)
+{
+	kick_all_cpus_sync();
 }
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/module-plts.c linux-libre-6.6.46-gnu/arch/arm64/kernel/module-plts.c
index bd69a4e7cd60..79200f21e123 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/module-plts.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/module-plts.c
@@ -167,9 +167,6 @@ static unsigned int count_plts(Elf64_Sym *syms, Elf64_Rela *rela, int num,
 		switch (ELF64_R_TYPE(rela[i].r_info)) {
 		case R_AARCH64_JUMP26:
 		case R_AARCH64_CALL26:
-			if (!IS_ENABLED(CONFIG_RANDOMIZE_BASE))
-				break;
-
 			/*
 			 * We only have to consider branch targets that resolve
 			 * to symbols that are defined in a different section.
@@ -269,9 +266,6 @@ static int partition_branch_plt_relas(Elf64_Sym *syms, Elf64_Rela *rela,
 {
 	int i = 0, j = numrels - 1;
 
-	if (!IS_ENABLED(CONFIG_RANDOMIZE_BASE))
-		return 0;
-
 	while (i < j) {
 		if (branch_rela_needs_plt(syms, &rela[i], dstidx))
 			i++;
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/proton-pack.c linux-libre-6.6.46-gnu/arch/arm64/kernel/proton-pack.c
index 05f40c4e18fd..57503dc4b22f 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/proton-pack.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/proton-pack.c
@@ -558,6 +558,18 @@ static enum mitigation_state spectre_v4_enable_hw_mitigation(void)
 
 	/* SCTLR_EL1.DSSBS was initialised to 0 during boot */
 	set_pstate_ssbs(0);
+
+	/*
+	 * SSBS is self-synchronizing and is intended to affect subsequent
+	 * speculative instructions, but some CPUs can speculate with a stale
+	 * value of SSBS.
+	 *
+	 * Mitigate this with an unconditional speculation barrier, as CPUs
+	 * could mis-speculate branches and bypass a conditional barrier.
+	 */
+	if (IS_ENABLED(CONFIG_ARM64_ERRATUM_3194386))
+		spec_bar();
+
 	return SPECTRE_MITIGATED;
 }
 
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/ptrace.c linux-libre-6.6.46-gnu/arch/arm64/kernel/ptrace.c
index 20d7ef82de90..d95416b93a9d 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/ptrace.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/ptrace.c
@@ -728,7 +728,6 @@ static void sve_init_header_from_task(struct user_sve_header *header,
 {
 	unsigned int vq;
 	bool active;
-	bool fpsimd_only;
 	enum vec_type task_type;
 
 	memset(header, 0, sizeof(*header));
@@ -744,12 +743,10 @@ static void sve_init_header_from_task(struct user_sve_header *header,
 	case ARM64_VEC_SVE:
 		if (test_tsk_thread_flag(target, TIF_SVE_VL_INHERIT))
 			header->flags |= SVE_PT_VL_INHERIT;
-		fpsimd_only = !test_tsk_thread_flag(target, TIF_SVE);
 		break;
 	case ARM64_VEC_SME:
 		if (test_tsk_thread_flag(target, TIF_SME_VL_INHERIT))
 			header->flags |= SVE_PT_VL_INHERIT;
-		fpsimd_only = false;
 		break;
 	default:
 		WARN_ON_ONCE(1);
@@ -757,7 +754,7 @@ static void sve_init_header_from_task(struct user_sve_header *header,
 	}
 
 	if (active) {
-		if (fpsimd_only) {
+		if (target->thread.fp_type == FP_STATE_FPSIMD) {
 			header->flags |= SVE_PT_REGS_FPSIMD;
 		} else {
 			header->flags |= SVE_PT_REGS_SVE;
@@ -1107,12 +1104,13 @@ static int za_set(struct task_struct *target,
 		}
 	}
 
-	/* Allocate/reinit ZA storage */
-	sme_alloc(target, true);
-	if (!target->thread.sme_state) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	/*
+	 * Only flush the storage if PSTATE.ZA was not already set,
+	 * otherwise preserve any existing data.
+	 */
+	sme_alloc(target, !thread_za_enabled(&target->thread));
+	if (!target->thread.sme_state)
+		return -ENOMEM;
 
 	/* If there is no data then disable ZA */
 	if (!count) {
@@ -1498,7 +1496,8 @@ static const struct user_regset aarch64_regsets[] = {
 #ifdef CONFIG_ARM64_SVE
 	[REGSET_SVE] = { /* Scalable Vector Extension */
 		.core_note_type = NT_ARM_SVE,
-		.n = DIV_ROUND_UP(SVE_PT_SIZE(SVE_VQ_MAX, SVE_PT_REGS_SVE),
+		.n = DIV_ROUND_UP(SVE_PT_SIZE(ARCH_SVE_VQ_MAX,
+					      SVE_PT_REGS_SVE),
 				  SVE_VQ_BYTES),
 		.size = SVE_VQ_BYTES,
 		.align = SVE_VQ_BYTES,
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/signal.c linux-libre-6.6.46-gnu/arch/arm64/kernel/signal.c
index 0e8beb3349ea..425b1bc17a3f 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/signal.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/signal.c
@@ -242,7 +242,7 @@ static int preserve_sve_context(struct sve_context __user *ctx)
 		vl = task_get_sme_vl(current);
 		vq = sve_vq_from_vl(vl);
 		flags |= SVE_SIG_FLAG_SM;
-	} else if (test_thread_flag(TIF_SVE)) {
+	} else if (current->thread.fp_type == FP_STATE_SVE) {
 		vq = sve_vq_from_vl(vl);
 	}
 
@@ -878,7 +878,7 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
 	if (system_supports_sve() || system_supports_sme()) {
 		unsigned int vq = 0;
 
-		if (add_all || test_thread_flag(TIF_SVE) ||
+		if (add_all || current->thread.fp_type == FP_STATE_SVE ||
 		    thread_sm_enabled(&current->thread)) {
 			int vl = max(sve_max_vl(), sme_max_vl());
 
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/suspend.c linux-libre-6.6.46-gnu/arch/arm64/kernel/suspend.c
index 0fbdf5fe64d8..045af2bfd656 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/suspend.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/suspend.c
@@ -12,6 +12,7 @@
 #include <asm/daifflags.h>
 #include <asm/debug-monitors.h>
 #include <asm/exec.h>
+#include <asm/fpsimd.h>
 #include <asm/mte.h>
 #include <asm/memory.h>
 #include <asm/mmu_context.h>
@@ -80,6 +81,8 @@ void notrace __cpu_suspend_exit(void)
 	 */
 	spectre_v4_enable_mitigation(NULL);
 
+	sme_suspend_exit();
+
 	/* Restore additional feature-specific configuration */
 	ptrauth_suspend_exit();
 }
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/syscall.c linux-libre-6.6.46-gnu/arch/arm64/kernel/syscall.c
index 9a70d9746b66..f090e39f69bc 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/syscall.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/syscall.c
@@ -56,17 +56,15 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno,
 	syscall_set_return_value(current, regs, 0, ret);
 
 	/*
-	 * Ultimately, this value will get limited by KSTACK_OFFSET_MAX(),
-	 * but not enough for arm64 stack utilization comfort. To keep
-	 * reasonable stack head room, reduce the maximum offset to 9 bits.
+	 * This value will get limited by KSTACK_OFFSET_MAX(), which is 10
+	 * bits. The actual entropy will be further reduced by the compiler
+	 * when applying stack alignment constraints: the AAPCS mandates a
+	 * 16-byte aligned SP at function boundaries, which will remove the
+	 * 4 low bits from any entropy chosen here.
 	 *
-	 * The actual entropy will be further reduced by the compiler when
-	 * applying stack alignment constraints: the AAPCS mandates a
-	 * 16-byte (i.e. 4-bit) aligned SP at function boundaries.
-	 *
-	 * The resulting 5 bits of entropy is seen in SP[8:4].
+	 * The resulting 6 bits of entropy is seen in SP[9:4].
 	 */
-	choose_random_kstack_offset(get_random_u16() & 0x1FF);
+	choose_random_kstack_offset(get_random_u16());
 }
 
 static inline bool has_syscall_work(unsigned long flags)
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/vdso/Makefile linux-libre-6.6.46-gnu/arch/arm64/kernel/vdso/Makefile
index fe7a53c6781f..8818287f1095 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/vdso/Makefile
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/vdso/Makefile
@@ -78,13 +78,3 @@ include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
 # Actual build commands
 quiet_cmd_vdsold_and_vdso_check = LD      $@
       cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check)
-
-# Install commands for the unstripped file
-quiet_cmd_vdso_install = INSTALL $@
-      cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
-
-vdso.so: $(obj)/vdso.so.dbg
-	@mkdir -p $(MODLIB)/vdso
-	$(call cmd,vdso_install)
-
-vdso_install: vdso.so
diff --git linux-libre-6.6-gnu/arch/arm64/kernel/vdso32/Makefile linux-libre-6.6.46-gnu/arch/arm64/kernel/vdso32/Makefile
index 2f73e5bca213..1f911a76c5af 100644
--- linux-libre-6.6-gnu/arch/arm64/kernel/vdso32/Makefile
+++ linux-libre-6.6.46-gnu/arch/arm64/kernel/vdso32/Makefile
@@ -172,13 +172,3 @@ gen-vdsosym := $(srctree)/$(src)/../vdso/gen_vdso_offsets.sh
 quiet_cmd_vdsosym = VDSOSYM $@
 # The AArch64 nm should be able to read an AArch32 binary
       cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
-
-# Install commands for the unstripped file
-quiet_cmd_vdso_install = INSTALL32 $@
-      cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/vdso32.so
-
-vdso.so: $(obj)/vdso.so.dbg
-	@mkdir -p $(MODLIB)/vdso
-	$(call cmd,vdso_install)
-
-vdso_install: vdso.so
diff --git linux-libre-6.6-gnu/arch/arm64/kvm/arm.c linux-libre-6.6.46-gnu/arch/arm64/kvm/arm.c
index 4866b3f7b4ea..685cc436146a 100644
--- linux-libre-6.6-gnu/arch/arm64/kvm/arm.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kvm/arm.c
@@ -407,7 +407,7 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 	kvm_mmu_free_memory_cache(&vcpu->arch.mmu_page_cache);
 	kvm_timer_vcpu_terminate(vcpu);
 	kvm_pmu_vcpu_destroy(vcpu);
-
+	kvm_vgic_vcpu_destroy(vcpu);
 	kvm_arm_vcpu_destroy(vcpu);
 }
 
diff --git linux-libre-6.6-gnu/arch/arm64/kvm/guest.c linux-libre-6.6.46-gnu/arch/arm64/kvm/guest.c
index 95f6945c4432..efe82cc86bd1 100644
--- linux-libre-6.6-gnu/arch/arm64/kvm/guest.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kvm/guest.c
@@ -251,6 +251,7 @@ static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 		case PSR_AA32_MODE_SVC:
 		case PSR_AA32_MODE_ABT:
 		case PSR_AA32_MODE_UND:
+		case PSR_AA32_MODE_SYS:
 			if (!vcpu_el1_is_32bit(vcpu))
 				return -EINVAL;
 			break;
@@ -276,7 +277,7 @@ static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	if (*vcpu_cpsr(vcpu) & PSR_MODE32_BIT) {
 		int i, nr_reg;
 
-		switch (*vcpu_cpsr(vcpu)) {
+		switch (*vcpu_cpsr(vcpu) & PSR_AA32_MODE_MASK) {
 		/*
 		 * Either we are dealing with user mode, and only the
 		 * first 15 registers (+ PC) must be narrowed to 32bit.
@@ -874,7 +875,7 @@ u32 __attribute_const__ kvm_target_cpu(void)
 		break;
 	case ARM_CPU_IMP_APM:
 		switch (part_number) {
-		case APM_CPU_PART_POTENZA:
+		case APM_CPU_PART_XGENE:
 			return KVM_ARM_TARGET_XGENE_POTENZA;
 		}
 		break;
diff --git linux-libre-6.6-gnu/arch/arm64/kvm/hyp/aarch32.c linux-libre-6.6.46-gnu/arch/arm64/kvm/hyp/aarch32.c
index f98cbe2626a1..19efb41aab80 100644
--- linux-libre-6.6-gnu/arch/arm64/kvm/hyp/aarch32.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kvm/hyp/aarch32.c
@@ -50,9 +50,23 @@ bool kvm_condition_valid32(const struct kvm_vcpu *vcpu)
 	u32 cpsr_cond;
 	int cond;
 
-	/* Top two bits non-zero?  Unconditional. */
-	if (kvm_vcpu_get_esr(vcpu) >> 30)
+	/*
+	 * These are the exception classes that could fire with a
+	 * conditional instruction.
+	 */
+	switch (kvm_vcpu_trap_get_class(vcpu)) {
+	case ESR_ELx_EC_CP15_32:
+	case ESR_ELx_EC_CP15_64:
+	case ESR_ELx_EC_CP14_MR:
+	case ESR_ELx_EC_CP14_LS:
+	case ESR_ELx_EC_FP_ASIMD:
+	case ESR_ELx_EC_CP10_ID:
+	case ESR_ELx_EC_CP14_64:
+	case ESR_ELx_EC_SVC32:
+		break;
+	default:
 		return true;
+	}
 
 	/* Is condition field valid? */
 	cond = kvm_vcpu_get_condition(vcpu);
diff --git linux-libre-6.6-gnu/arch/arm64/kvm/hyp/include/nvhe/gfp.h linux-libre-6.6.46-gnu/arch/arm64/kvm/hyp/include/nvhe/gfp.h
index fe5472a184a3..97c527ef53c2 100644
--- linux-libre-6.6-gnu/arch/arm64/kvm/hyp/include/nvhe/gfp.h
+++ linux-libre-6.6.46-gnu/arch/arm64/kvm/hyp/include/nvhe/gfp.h
@@ -16,7 +16,7 @@ struct hyp_pool {
 	 * API at EL2.
 	 */
 	hyp_spinlock_t lock;
-	struct list_head free_area[MAX_ORDER + 1];
+	struct list_head free_area[NR_PAGE_ORDERS];
 	phys_addr_t range_start;
 	phys_addr_t range_end;
 	unsigned short max_order;
diff --git linux-libre-6.6-gnu/arch/arm64/kvm/hyp/pgtable.c linux-libre-6.6.46-gnu/arch/arm64/kvm/hyp/pgtable.c
index f155b8c9e98c..15aa9bad1c28 100644
--- linux-libre-6.6-gnu/arch/arm64/kvm/hyp/pgtable.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kvm/hyp/pgtable.c
@@ -805,12 +805,15 @@ static bool stage2_try_break_pte(const struct kvm_pgtable_visit_ctx *ctx,
 		 * Perform the appropriate TLB invalidation based on the
 		 * evicted pte value (if any).
 		 */
-		if (kvm_pte_table(ctx->old, ctx->level))
-			kvm_tlb_flush_vmid_range(mmu, ctx->addr,
-						kvm_granule_size(ctx->level));
-		else if (kvm_pte_valid(ctx->old))
+		if (kvm_pte_table(ctx->old, ctx->level)) {
+			u64 size = kvm_granule_size(ctx->level);
+			u64 addr = ALIGN_DOWN(ctx->addr, size);
+
+			kvm_tlb_flush_vmid_range(mmu, addr, size);
+		} else if (kvm_pte_valid(ctx->old)) {
 			kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, mmu,
 				     ctx->addr, ctx->level);
+		}
 	}
 
 	if (stage2_pte_is_counted(ctx->old))
diff --git linux-libre-6.6-gnu/arch/arm64/kvm/pkvm.c linux-libre-6.6.46-gnu/arch/arm64/kvm/pkvm.c
index 6ff3ec18c925..b2c8084cdb95 100644
--- linux-libre-6.6-gnu/arch/arm64/kvm/pkvm.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kvm/pkvm.c
@@ -101,6 +101,17 @@ void __init kvm_hyp_reserve(void)
 		 hyp_mem_base);
 }
 
+static void __pkvm_destroy_hyp_vm(struct kvm *host_kvm)
+{
+	if (host_kvm->arch.pkvm.handle) {
+		WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm,
+					  host_kvm->arch.pkvm.handle));
+	}
+
+	host_kvm->arch.pkvm.handle = 0;
+	free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc);
+}
+
 /*
  * Allocates and donates memory for hypervisor VM structs at EL2.
  *
@@ -181,7 +192,7 @@ static int __pkvm_create_hyp_vm(struct kvm *host_kvm)
 	return 0;
 
 destroy_vm:
-	pkvm_destroy_hyp_vm(host_kvm);
+	__pkvm_destroy_hyp_vm(host_kvm);
 	return ret;
 free_vm:
 	free_pages_exact(hyp_vm, hyp_vm_sz);
@@ -194,23 +205,19 @@ int pkvm_create_hyp_vm(struct kvm *host_kvm)
 {
 	int ret = 0;
 
-	mutex_lock(&host_kvm->lock);
+	mutex_lock(&host_kvm->arch.config_lock);
 	if (!host_kvm->arch.pkvm.handle)
 		ret = __pkvm_create_hyp_vm(host_kvm);
-	mutex_unlock(&host_kvm->lock);
+	mutex_unlock(&host_kvm->arch.config_lock);
 
 	return ret;
 }
 
 void pkvm_destroy_hyp_vm(struct kvm *host_kvm)
 {
-	if (host_kvm->arch.pkvm.handle) {
-		WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm,
-					  host_kvm->arch.pkvm.handle));
-	}
-
-	host_kvm->arch.pkvm.handle = 0;
-	free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc);
+	mutex_lock(&host_kvm->arch.config_lock);
+	__pkvm_destroy_hyp_vm(host_kvm);
+	mutex_unlock(&host_kvm->arch.config_lock);
 }
 
 int pkvm_init_host_vm(struct kvm *host_kvm)
diff --git linux-libre-6.6-gnu/arch/arm64/kvm/vgic/vgic-init.c linux-libre-6.6.46-gnu/arch/arm64/kvm/vgic/vgic-init.c
index c8c3cb812783..a2b439ad387c 100644
--- linux-libre-6.6-gnu/arch/arm64/kvm/vgic/vgic-init.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kvm/vgic/vgic-init.c
@@ -355,7 +355,7 @@ static void kvm_vgic_dist_destroy(struct kvm *kvm)
 
 	if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) {
 		list_for_each_entry_safe(rdreg, next, &dist->rd_regions, list)
-			vgic_v3_free_redist_region(rdreg);
+			vgic_v3_free_redist_region(kvm, rdreg);
 		INIT_LIST_HEAD(&dist->rd_regions);
 	} else {
 		dist->vgic_cpu_base = VGIC_ADDR_UNDEF;
@@ -368,7 +368,7 @@ static void kvm_vgic_dist_destroy(struct kvm *kvm)
 		vgic_v4_teardown(kvm);
 }
 
-void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu)
+static void __kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu)
 {
 	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
 
@@ -379,29 +379,39 @@ void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu)
 	vgic_flush_pending_lpis(vcpu);
 
 	INIT_LIST_HEAD(&vgic_cpu->ap_list_head);
-	vgic_cpu->rd_iodev.base_addr = VGIC_ADDR_UNDEF;
+	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) {
+		vgic_unregister_redist_iodev(vcpu);
+		vgic_cpu->rd_iodev.base_addr = VGIC_ADDR_UNDEF;
+	}
 }
 
-static void __kvm_vgic_destroy(struct kvm *kvm)
+void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = vcpu->kvm;
+
+	mutex_lock(&kvm->slots_lock);
+	__kvm_vgic_vcpu_destroy(vcpu);
+	mutex_unlock(&kvm->slots_lock);
+}
+
+void kvm_vgic_destroy(struct kvm *kvm)
 {
 	struct kvm_vcpu *vcpu;
 	unsigned long i;
 
-	lockdep_assert_held(&kvm->arch.config_lock);
+	mutex_lock(&kvm->slots_lock);
 
 	vgic_debug_destroy(kvm);
 
 	kvm_for_each_vcpu(i, vcpu, kvm)
-		kvm_vgic_vcpu_destroy(vcpu);
+		__kvm_vgic_vcpu_destroy(vcpu);
+
+	mutex_lock(&kvm->arch.config_lock);
 
 	kvm_vgic_dist_destroy(kvm);
-}
 
-void kvm_vgic_destroy(struct kvm *kvm)
-{
-	mutex_lock(&kvm->arch.config_lock);
-	__kvm_vgic_destroy(kvm);
 	mutex_unlock(&kvm->arch.config_lock);
+	mutex_unlock(&kvm->slots_lock);
 }
 
 /**
@@ -469,25 +479,26 @@ int kvm_vgic_map_resources(struct kvm *kvm)
 		type = VGIC_V3;
 	}
 
-	if (ret) {
-		__kvm_vgic_destroy(kvm);
+	if (ret)
 		goto out;
-	}
+
 	dist->ready = true;
 	dist_base = dist->vgic_dist_base;
 	mutex_unlock(&kvm->arch.config_lock);
 
 	ret = vgic_register_dist_iodev(kvm, dist_base, type);
-	if (ret) {
+	if (ret)
 		kvm_err("Unable to register VGIC dist MMIO regions\n");
-		kvm_vgic_destroy(kvm);
-	}
-	mutex_unlock(&kvm->slots_lock);
-	return ret;
 
+	goto out_slots;
 out:
 	mutex_unlock(&kvm->arch.config_lock);
+out_slots:
 	mutex_unlock(&kvm->slots_lock);
+
+	if (ret)
+		kvm_vgic_destroy(kvm);
+
 	return ret;
 }
 
diff --git linux-libre-6.6-gnu/arch/arm64/kvm/vgic/vgic-its.c linux-libre-6.6.46-gnu/arch/arm64/kvm/vgic/vgic-its.c
index 5fe2365a629f..4f9084ba7949 100644
--- linux-libre-6.6-gnu/arch/arm64/kvm/vgic/vgic-its.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kvm/vgic/vgic-its.c
@@ -462,6 +462,9 @@ static int its_sync_lpi_pending_table(struct kvm_vcpu *vcpu)
 		}
 
 		irq = vgic_get_irq(vcpu->kvm, NULL, intids[i]);
+		if (!irq)
+			continue;
+
 		raw_spin_lock_irqsave(&irq->irq_lock, flags);
 		irq->pending_latch = pendmask & (1U << bit_nr);
 		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
@@ -584,7 +587,11 @@ static struct vgic_irq *vgic_its_check_cache(struct kvm *kvm, phys_addr_t db,
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
+
 	irq = __vgic_its_check_cache(dist, db, devid, eventid);
+	if (irq)
+		vgic_get_irq_kref(irq);
+
 	raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
 
 	return irq;
@@ -763,6 +770,7 @@ int vgic_its_inject_cached_translation(struct kvm *kvm, struct kvm_msi *msi)
 	raw_spin_lock_irqsave(&irq->irq_lock, flags);
 	irq->pending_latch = true;
 	vgic_queue_irq_unlock(kvm, irq, flags);
+	vgic_put_irq(kvm, irq);
 
 	return 0;
 }
@@ -1422,6 +1430,8 @@ static int vgic_its_cmd_handle_movall(struct kvm *kvm, struct vgic_its *its,
 
 	for (i = 0; i < irq_count; i++) {
 		irq = vgic_get_irq(kvm, NULL, intids[i]);
+		if (!irq)
+			continue;
 
 		update_affinity(irq, vcpu2);
 
diff --git linux-libre-6.6-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c linux-libre-6.6.46-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c
index 212b73a715c1..2f9e8c611f64 100644
--- linux-libre-6.6-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c
@@ -337,16 +337,12 @@ int kvm_register_vgic_device(unsigned long type)
 int vgic_v2_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr,
 		       struct vgic_reg_attr *reg_attr)
 {
-	int cpuid;
+	int cpuid = FIELD_GET(KVM_DEV_ARM_VGIC_CPUID_MASK, attr->attr);
 
-	cpuid = (attr->attr & KVM_DEV_ARM_VGIC_CPUID_MASK) >>
-		 KVM_DEV_ARM_VGIC_CPUID_SHIFT;
-
-	if (cpuid >= atomic_read(&dev->kvm->online_vcpus))
-		return -EINVAL;
-
-	reg_attr->vcpu = kvm_get_vcpu(dev->kvm, cpuid);
 	reg_attr->addr = attr->attr & KVM_DEV_ARM_VGIC_OFFSET_MASK;
+	reg_attr->vcpu = kvm_get_vcpu_by_id(dev->kvm, cpuid);
+	if (!reg_attr->vcpu)
+		return -EINVAL;
 
 	return 0;
 }
diff --git linux-libre-6.6-gnu/arch/arm64/kvm/vgic/vgic-mmio-v3.c linux-libre-6.6.46-gnu/arch/arm64/kvm/vgic/vgic-mmio-v3.c
index 188d2187eede..48e8b60ff1e3 100644
--- linux-libre-6.6-gnu/arch/arm64/kvm/vgic/vgic-mmio-v3.c
+++ linux-libre-6.6.46-gnu/arch/arm64/kvm/vgic/vgic-mmio-v3.c
@@ -365,19 +365,26 @@ static int vgic_v3_uaccess_write_pending(struct kvm_vcpu *vcpu,
 		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
 
 		raw_spin_lock_irqsave(&irq->irq_lock, flags);
-		if (test_bit(i, &val)) {
-			/*
-			 * pending_latch is set irrespective of irq type
-			 * (level or edge) to avoid dependency that VM should
-			 * restore irq config before pending info.
-			 */
-			irq->pending_latch = true;
-			vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
-		} else {
+
+		/*
+		 * pending_latch is set irrespective of irq type
+		 * (level or edge) to avoid dependency that VM should
+		 * restore irq config before pending info.
+		 */
+		irq->pending_latch = test_bit(i, &val);
+
+		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
+			irq_set_irqchip_state(irq->host_irq,
+					      IRQCHIP_STATE_PENDING,
+					      irq->pending_latch);
 			irq->pending_latch = false;
-			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
 		}
 
+		if (irq->pending_latch)
+			vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+		else
+			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
 		vgic_put_irq(vcpu->kvm, irq);
 	}
 
@@ -820,7 +827,7 @@ out_unlock:
 	return ret;
 }
 
-static void vgic_unregister_redist_iodev(struct kvm_vcpu *vcpu)
+void vgic_unregister_redist_iodev(struct kvm_vcpu *vcpu)
 {
 	struct vgic_io_device *rd_dev = &vcpu->arch.vgic_cpu.rd_iodev;
 
@@ -935,8 +942,19 @@ free:
 	return ret;
 }
 
-void vgic_v3_free_redist_region(struct vgic_redist_region *rdreg)
+void vgic_v3_free_redist_region(struct kvm *kvm, struct vgic_redist_region *rdreg)
 {
+	struct kvm_vcpu *vcpu;
+	unsigned long c;
+
+	lockdep_assert_held(&kvm->arch.config_lock);
+
+	/* Garbage collect the region */
+	kvm_for_each_vcpu(c, vcpu, kvm) {
+		if (vcpu->arch.vgic_cpu.rdreg == rdreg)
+			vcpu->arch.vgic_cpu.rdreg = NULL;
+	}
+
 	list_del(&rdreg->list);
 	kfree(rdreg);
 }
@@ -961,7 +979,7 @@ int vgic_v3_set_redist_base(struct kvm *kvm, u32 index, u64 addr, u32 count)
 
 		mutex_lock(&kvm->arch.config_lock);
 		rdreg = vgic_v3_rdist_region_from_index(kvm, index);
-		vgic_v3_free_redist_region(rdreg);
+		vgic_v3_free_redist_region(kvm, rdreg);
 		mutex_unlock(&kvm->arch.config_lock);
 		return ret;
 	}
diff --git linux-libre-6.6-gnu/arch/arm64/kvm/vgic/vgic.h linux-libre-6.6.46-gnu/arch/arm64/kvm/vgic/vgic.h
index 0ab09b0d4440..fae2618da720 100644
--- linux-libre-6.6-gnu/arch/arm64/kvm/vgic/vgic.h
+++ linux-libre-6.6.46-gnu/arch/arm64/kvm/vgic/vgic.h
@@ -241,6 +241,7 @@ int vgic_v3_lpi_sync_pending_status(struct kvm *kvm, struct vgic_irq *irq);
 int vgic_v3_save_pending_tables(struct kvm *kvm);
 int vgic_v3_set_redist_base(struct kvm *kvm, u32 index, u64 addr, u32 count);
 int vgic_register_redist_iodev(struct kvm_vcpu *vcpu);
+void vgic_unregister_redist_iodev(struct kvm_vcpu *vcpu);
 bool vgic_v3_check_base(struct kvm *kvm);
 
 void vgic_v3_load(struct kvm_vcpu *vcpu);
@@ -309,7 +310,7 @@ vgic_v3_rd_region_size(struct kvm *kvm, struct vgic_redist_region *rdreg)
 
 struct vgic_redist_region *vgic_v3_rdist_region_from_index(struct kvm *kvm,
 							   u32 index);
-void vgic_v3_free_redist_region(struct vgic_redist_region *rdreg);
+void vgic_v3_free_redist_region(struct kvm *kvm, struct vgic_redist_region *rdreg);
 
 bool vgic_v3_rdist_overlap(struct kvm *kvm, gpa_t base, size_t size);
 
diff --git linux-libre-6.6-gnu/arch/arm64/mm/pageattr.c linux-libre-6.6.46-gnu/arch/arm64/mm/pageattr.c
index 8e2017ba5f1b..0a62f458c5cb 100644
--- linux-libre-6.6-gnu/arch/arm64/mm/pageattr.c
+++ linux-libre-6.6.46-gnu/arch/arm64/mm/pageattr.c
@@ -29,8 +29,8 @@ bool can_set_direct_map(void)
 	 *
 	 * KFENCE pool requires page-granular mapping if initialized late.
 	 */
-	return (rodata_enabled && rodata_full) || debug_pagealloc_enabled() ||
-		arm64_kfence_can_set_direct_map();
+	return rodata_full || debug_pagealloc_enabled() ||
+	       arm64_kfence_can_set_direct_map();
 }
 
 static int change_page_range(pte_t *ptep, unsigned long addr, void *data)
@@ -105,8 +105,7 @@ static int change_memory_common(unsigned long addr, int numpages,
 	 * If we are manipulating read-only permissions, apply the same
 	 * change to the linear mapping of the pages that back this VM area.
 	 */
-	if (rodata_enabled &&
-	    rodata_full && (pgprot_val(set_mask) == PTE_RDONLY ||
+	if (rodata_full && (pgprot_val(set_mask) == PTE_RDONLY ||
 			    pgprot_val(clear_mask) == PTE_RDONLY)) {
 		for (i = 0; i < area->nr_pages; i++) {
 			__change_memory_common((u64)page_address(area->pages[i]),
@@ -220,9 +219,6 @@ bool kernel_page_present(struct page *page)
 	pte_t *ptep;
 	unsigned long addr = (unsigned long)page_address(page);
 
-	if (!can_set_direct_map())
-		return true;
-
 	pgdp = pgd_offset_k(addr);
 	if (pgd_none(READ_ONCE(*pgdp)))
 		return false;
diff --git linux-libre-6.6-gnu/arch/arm64/net/bpf_jit_comp.c linux-libre-6.6.46-gnu/arch/arm64/net/bpf_jit_comp.c
index 150d1c6543f7..166619348b98 100644
--- linux-libre-6.6-gnu/arch/arm64/net/bpf_jit_comp.c
+++ linux-libre-6.6.46-gnu/arch/arm64/net/bpf_jit_comp.c
@@ -876,7 +876,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 			emit(A64_UXTH(is64, dst, dst), ctx);
 			break;
 		case 32:
-			emit(A64_REV32(is64, dst, dst), ctx);
+			emit(A64_REV32(0, dst, dst), ctx);
 			/* upper 32 bits already cleared */
 			break;
 		case 64:
@@ -1189,7 +1189,7 @@ emit_cond_jmp:
 			} else {
 				emit_a64_mov_i(1, tmp, off, ctx);
 				if (sign_extend)
-					emit(A64_LDRSW(dst, src_adj, off_adj), ctx);
+					emit(A64_LDRSW(dst, src, tmp), ctx);
 				else
 					emit(A64_LDR32(dst, src, tmp), ctx);
 			}
@@ -1738,15 +1738,15 @@ static void invoke_bpf_prog(struct jit_ctx *ctx, struct bpf_tramp_link *l,
 
 	emit_call(enter_prog, ctx);
 
+	/* save return value to callee saved register x20 */
+	emit(A64_MOV(1, A64_R(20), A64_R(0)), ctx);
+
 	/* if (__bpf_prog_enter(prog) == 0)
 	 *         goto skip_exec_of_prog;
 	 */
 	branch = ctx->image + ctx->idx;
 	emit(A64_NOP, ctx);
 
-	/* save return value to callee saved register x20 */
-	emit(A64_MOV(1, A64_R(20), A64_R(0)), ctx);
-
 	emit(A64_ADD_I(1, A64_R(0), A64_SP, args_off), ctx);
 	if (!p->jited)
 		emit_addr_mov_i64(A64_R(1), (const u64)p->insnsi, ctx);
diff --git linux-libre-6.6-gnu/arch/arm64/tools/cpucaps linux-libre-6.6.46-gnu/arch/arm64/tools/cpucaps
index dea3dc89234b..c251ef3caae5 100644
--- linux-libre-6.6-gnu/arch/arm64/tools/cpucaps
+++ linux-libre-6.6.46-gnu/arch/arm64/tools/cpucaps
@@ -84,7 +84,6 @@ WORKAROUND_2077057
 WORKAROUND_2457168
 WORKAROUND_2645198
 WORKAROUND_2658417
-WORKAROUND_2966298
 WORKAROUND_AMPERE_AC03_CPU_38
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
@@ -100,3 +99,5 @@ WORKAROUND_NVIDIA_CARMEL_CNP
 WORKAROUND_QCOM_FALKOR_E1003
 WORKAROUND_REPEAT_TLBI
 WORKAROUND_SPECULATIVE_AT
+WORKAROUND_SPECULATIVE_SSBS
+WORKAROUND_SPECULATIVE_UNPRIV_LOAD
diff --git linux-libre-6.6-gnu/arch/csky/abiv1/inc/abi/cacheflush.h linux-libre-6.6.46-gnu/arch/csky/abiv1/inc/abi/cacheflush.h
index 908d8b0bc4fd..d011a81575d2 100644
--- linux-libre-6.6-gnu/arch/csky/abiv1/inc/abi/cacheflush.h
+++ linux-libre-6.6.46-gnu/arch/csky/abiv1/inc/abi/cacheflush.h
@@ -43,6 +43,7 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
  */
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
 #define flush_cache_vmap(start, end)		cache_wbinv_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		cache_wbinv_all()
 
 #define flush_icache_range(start, end)		cache_wbinv_range(start, end)
diff --git linux-libre-6.6-gnu/arch/csky/abiv2/inc/abi/cacheflush.h linux-libre-6.6.46-gnu/arch/csky/abiv2/inc/abi/cacheflush.h
index 40be16907267..6513ac5d2578 100644
--- linux-libre-6.6-gnu/arch/csky/abiv2/inc/abi/cacheflush.h
+++ linux-libre-6.6.46-gnu/arch/csky/abiv2/inc/abi/cacheflush.h
@@ -41,6 +41,7 @@ void flush_icache_mm_range(struct mm_struct *mm,
 void flush_icache_deferred(struct mm_struct *mm);
 
 #define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		do { } while (0)
 
 #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
diff --git linux-libre-6.6-gnu/arch/csky/include/asm/irq_work.h linux-libre-6.6.46-gnu/arch/csky/include/asm/irq_work.h
index 33aaf39d6f94..d39fcc1f5395 100644
--- linux-libre-6.6-gnu/arch/csky/include/asm/irq_work.h
+++ linux-libre-6.6.46-gnu/arch/csky/include/asm/irq_work.h
@@ -7,5 +7,5 @@ static inline bool arch_irq_work_has_interrupt(void)
 {
 	return true;
 }
-extern void arch_irq_work_raise(void);
+
 #endif /* __ASM_CSKY_IRQ_WORK_H */
diff --git linux-libre-6.6-gnu/arch/csky/include/asm/jump_label.h linux-libre-6.6.46-gnu/arch/csky/include/asm/jump_label.h
index d488ba6084bc..ef2e37a10a0f 100644
--- linux-libre-6.6-gnu/arch/csky/include/asm/jump_label.h
+++ linux-libre-6.6.46-gnu/arch/csky/include/asm/jump_label.h
@@ -12,7 +12,7 @@
 static __always_inline bool arch_static_branch(struct static_key *key,
 					       bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	nop32					\n"
 		"	.pushsection	__jump_table, \"aw\"	\n"
 		"	.align		2			\n"
@@ -29,7 +29,7 @@ label:
 static __always_inline bool arch_static_branch_jump(struct static_key *key,
 						    bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	bsr32		%l[label]		\n"
 		"	.pushsection	__jump_table, \"aw\"	\n"
 		"	.align		2			\n"
@@ -43,5 +43,10 @@ label:
 	return true;
 }
 
+enum jump_label_type;
+void arch_jump_label_transform_static(struct jump_entry *entry,
+				      enum jump_label_type type);
+#define arch_jump_label_transform_static arch_jump_label_transform_static
+
 #endif  /* __ASSEMBLY__ */
 #endif	/* __ASM_CSKY_JUMP_LABEL_H */
diff --git linux-libre-6.6-gnu/arch/csky/include/uapi/asm/unistd.h linux-libre-6.6.46-gnu/arch/csky/include/uapi/asm/unistd.h
index 7ff6a2466af1..e0594b6370a6 100644
--- linux-libre-6.6-gnu/arch/csky/include/uapi/asm/unistd.h
+++ linux-libre-6.6.46-gnu/arch/csky/include/uapi/asm/unistd.h
@@ -6,6 +6,7 @@
 #define __ARCH_WANT_SYS_CLONE3
 #define __ARCH_WANT_SET_GET_RLIMIT
 #define __ARCH_WANT_TIME32_SYSCALLS
+#define __ARCH_WANT_SYNC_FILE_RANGE2
 #include <asm-generic/unistd.h>
 
 #define __NR_set_thread_area	(__NR_arch_specific_syscall + 0)
diff --git linux-libre-6.6-gnu/arch/csky/kernel/probes/ftrace.c linux-libre-6.6.46-gnu/arch/csky/kernel/probes/ftrace.c
index 834cffcfbce3..7ba4b98076de 100644
--- linux-libre-6.6-gnu/arch/csky/kernel/probes/ftrace.c
+++ linux-libre-6.6.46-gnu/arch/csky/kernel/probes/ftrace.c
@@ -12,6 +12,9 @@ void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
 	struct kprobe_ctlblk *kcb;
 	struct pt_regs *regs;
 
+	if (unlikely(kprobe_ftrace_disabled))
+		return;
+
 	bit = ftrace_test_recursion_trylock(ip, parent_ip);
 	if (bit < 0)
 		return;
diff --git linux-libre-6.6-gnu/arch/hexagon/include/asm/syscalls.h linux-libre-6.6.46-gnu/arch/hexagon/include/asm/syscalls.h
new file mode 100644
index 000000000000..40f2d08bec92
--- /dev/null
+++ linux-libre-6.6.46-gnu/arch/hexagon/include/asm/syscalls.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <asm-generic/syscalls.h>
+
+asmlinkage long sys_hexagon_fadvise64_64(int fd, int advice,
+	                                  u32 a2, u32 a3, u32 a4, u32 a5);
diff --git linux-libre-6.6-gnu/arch/hexagon/include/uapi/asm/unistd.h linux-libre-6.6.46-gnu/arch/hexagon/include/uapi/asm/unistd.h
index 432c4db1b623..21ae22306b5d 100644
--- linux-libre-6.6-gnu/arch/hexagon/include/uapi/asm/unistd.h
+++ linux-libre-6.6.46-gnu/arch/hexagon/include/uapi/asm/unistd.h
@@ -36,5 +36,6 @@
 #define __ARCH_WANT_SYS_VFORK
 #define __ARCH_WANT_SYS_FORK
 #define __ARCH_WANT_TIME32_SYSCALLS
+#define __ARCH_WANT_SYNC_FILE_RANGE2
 
 #include <asm-generic/unistd.h>
diff --git linux-libre-6.6-gnu/arch/hexagon/kernel/syscalltab.c linux-libre-6.6.46-gnu/arch/hexagon/kernel/syscalltab.c
index 0fadd582cfc7..5d98bdc494ec 100644
--- linux-libre-6.6-gnu/arch/hexagon/kernel/syscalltab.c
+++ linux-libre-6.6.46-gnu/arch/hexagon/kernel/syscalltab.c
@@ -14,6 +14,13 @@
 #undef __SYSCALL
 #define __SYSCALL(nr, call) [nr] = (call),
 
+SYSCALL_DEFINE6(hexagon_fadvise64_64, int, fd, int, advice,
+		SC_ARG64(offset), SC_ARG64(len))
+{
+	return ksys_fadvise64_64(fd, SC_VAL64(loff_t, offset), SC_VAL64(loff_t, len), advice);
+}
+#define sys_fadvise64_64 sys_hexagon_fadvise64_64
+
 void *sys_call_table[__NR_syscalls] = {
 #include <asm/unistd.h>
 };
diff --git linux-libre-6.6-gnu/arch/hexagon/kernel/vmlinux.lds.S linux-libre-6.6.46-gnu/arch/hexagon/kernel/vmlinux.lds.S
index 1140051a0c45..1150b77fa281 100644
--- linux-libre-6.6-gnu/arch/hexagon/kernel/vmlinux.lds.S
+++ linux-libre-6.6.46-gnu/arch/hexagon/kernel/vmlinux.lds.S
@@ -63,6 +63,7 @@ SECTIONS
 	STABS_DEBUG
 	DWARF_DEBUG
 	ELF_DETAILS
+	.hexagon.attributes 0 : { *(.hexagon.attributes) }
 
 	DISCARDS
 }
diff --git linux-libre-6.6-gnu/arch/ia64/kernel/setup.c linux-libre-6.6.46-gnu/arch/ia64/kernel/setup.c
index 5a55ac82c13a..d2c66efdde56 100644
--- linux-libre-6.6-gnu/arch/ia64/kernel/setup.c
+++ linux-libre-6.6.46-gnu/arch/ia64/kernel/setup.c
@@ -86,9 +86,13 @@ EXPORT_SYMBOL(local_per_cpu_offset);
 #endif
 unsigned long ia64_cycles_per_usec;
 struct ia64_boot_param *ia64_boot_param;
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_EFI)
 struct screen_info screen_info;
+#endif
+#ifdef CONFIG_VGA_CONSOLE
 unsigned long vga_console_iobase;
 unsigned long vga_console_membase;
+#endif
 
 static struct resource data_resource = {
 	.name	= "Kernel data",
@@ -497,6 +501,7 @@ early_console_setup (char *cmdline)
 static void __init
 screen_info_setup(void)
 {
+#ifdef CONFIG_VGA_CONSOLE
 	unsigned int orig_x, orig_y, num_cols, num_rows, font_height;
 
 	memset(&screen_info, 0, sizeof(screen_info));
@@ -525,6 +530,7 @@ screen_info_setup(void)
 	screen_info.orig_video_mode = 3;	/* XXX fake */
 	screen_info.orig_video_isVGA = 1;	/* XXX fake */
 	screen_info.orig_video_ega_bx = 3;	/* XXX fake */
+#endif
 }
 
 static inline void
diff --git linux-libre-6.6-gnu/arch/loongarch/Kconfig linux-libre-6.6.46-gnu/arch/loongarch/Kconfig
index e14396a2ddcb..9fd8644a9a4c 100644
--- linux-libre-6.6-gnu/arch/loongarch/Kconfig
+++ linux-libre-6.6.46-gnu/arch/loongarch/Kconfig
@@ -11,6 +11,7 @@ config LOONGARCH
 	select ARCH_DISABLE_KASAN_INLINE
 	select ARCH_ENABLE_MEMORY_HOTPLUG
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
+	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
 	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
 	select ARCH_HAS_CPU_FINALIZE_INIT
 	select ARCH_HAS_FORTIFY_SOURCE
@@ -97,6 +98,7 @@ config LOONGARCH
 	select HAVE_ARCH_KFENCE
 	select HAVE_ARCH_KGDB if PERF_EVENTS
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
+	select HAVE_ARCH_SECCOMP
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
@@ -603,23 +605,6 @@ config RANDOMIZE_BASE_MAX_OFFSET
 
 	  This is limited by the size of the lower address memory, 256MB.
 
-config SECCOMP
-	bool "Enable seccomp to safely compute untrusted bytecode"
-	depends on PROC_FS
-	default y
-	help
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via /proc/<pid>/seccomp, it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-	  If unsure, say Y. Only embedded should say N here.
-
 endmenu
 
 config ARCH_SELECT_MEMORY_MODEL
@@ -638,10 +623,6 @@ config ARCH_SPARSEMEM_ENABLE
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/mm/numa.rst> for more.
 
-config ARCH_ENABLE_THP_MIGRATION
-	def_bool y
-	depends on TRANSPARENT_HUGEPAGE
-
 config ARCH_MEMORY_PROBE
 	def_bool y
 	depends on MEMORY_HOTPLUG
diff --git linux-libre-6.6-gnu/arch/loongarch/Makefile linux-libre-6.6.46-gnu/arch/loongarch/Makefile
index fb0fada43197..81e8089c9c4f 100644
--- linux-libre-6.6-gnu/arch/loongarch/Makefile
+++ linux-libre-6.6.46-gnu/arch/loongarch/Makefile
@@ -80,7 +80,7 @@ endif
 
 ifeq ($(CONFIG_RELOCATABLE),y)
 KBUILD_CFLAGS_KERNEL		+= -fPIE
-LDFLAGS_vmlinux			+= -static -pie --no-dynamic-linker -z notext
+LDFLAGS_vmlinux			+= -static -pie --no-dynamic-linker -z notext $(call ld-option, --apply-dynamic-relocs)
 endif
 
 cflags-y += $(call cc-option, -mno-check-zero-division)
@@ -136,12 +136,12 @@ vdso_prepare: prepare0
 	$(Q)$(MAKE) $(build)=arch/loongarch/vdso include/generated/vdso-offsets.h
 endif
 
-PHONY += vdso_install
-vdso_install:
-	$(Q)$(MAKE) $(build)=arch/loongarch/vdso $@
+vdso-install-y += arch/loongarch/vdso/vdso.so.dbg
 
 all:	$(notdir $(KBUILD_IMAGE))
 
+vmlinuz.efi: vmlinux.efi
+
 vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
 
diff --git linux-libre-6.6-gnu/arch/loongarch/crypto/crc32-loongarch.c linux-libre-6.6.46-gnu/arch/loongarch/crypto/crc32-loongarch.c
index 1f2a2c3839bc..1e8ff57a46ca 100644
--- linux-libre-6.6-gnu/arch/loongarch/crypto/crc32-loongarch.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/crypto/crc32-loongarch.c
@@ -44,7 +44,6 @@ static u32 crc32_loongarch_hw(u32 crc_, const u8 *p, unsigned int len)
 
 		CRC32(crc, value, w);
 		p += sizeof(u32);
-		len -= sizeof(u32);
 	}
 
 	if (len & sizeof(u16)) {
@@ -80,7 +79,6 @@ static u32 crc32c_loongarch_hw(u32 crc_, const u8 *p, unsigned int len)
 
 		CRC32C(crc, value, w);
 		p += sizeof(u32);
-		len -= sizeof(u32);
 	}
 
 	if (len & sizeof(u16)) {
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/Kbuild linux-libre-6.6.46-gnu/arch/loongarch/include/asm/Kbuild
index 93783fa24f6e..dede0b422cfb 100644
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/Kbuild
+++ linux-libre-6.6.46-gnu/arch/loongarch/include/asm/Kbuild
@@ -4,6 +4,7 @@ generic-y += mcs_spinlock.h
 generic-y += parport.h
 generic-y += early_ioremap.h
 generic-y += qrwlock.h
+generic-y += qspinlock.h
 generic-y += rwsem.h
 generic-y += segment.h
 generic-y += user.h
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/acpi.h linux-libre-6.6.46-gnu/arch/loongarch/include/asm/acpi.h
index 8de6c4b83a61..49e29b29996f 100644
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/acpi.h
+++ linux-libre-6.6.46-gnu/arch/loongarch/include/asm/acpi.h
@@ -32,8 +32,10 @@ static inline bool acpi_has_cpu_in_madt(void)
 	return true;
 }
 
+#define MAX_CORE_PIC 256
+
 extern struct list_head acpi_wakeup_device_list;
-extern struct acpi_madt_core_pic acpi_core_pic[NR_CPUS];
+extern struct acpi_madt_core_pic acpi_core_pic[MAX_CORE_PIC];
 
 extern int __init parse_acpi_topology(void);
 
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/asmmacro.h linux-libre-6.6.46-gnu/arch/loongarch/include/asm/asmmacro.h
index c9544f358c33..655db7d7a427 100644
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/asmmacro.h
+++ linux-libre-6.6.46-gnu/arch/loongarch/include/asm/asmmacro.h
@@ -609,8 +609,7 @@
 	lu32i.d	\reg, 0
 	lu52i.d	\reg, \reg, 0
 	.pushsection ".la_abs", "aw", %progbits
-	768:
-	.dword	768b-766b
+	.dword	766b
 	.dword	\sym
 	.popsection
 #endif
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/efi.h linux-libre-6.6.46-gnu/arch/loongarch/include/asm/efi.h
index 091897d40b03..eddc8e79b3fa 100644
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/efi.h
+++ linux-libre-6.6.46-gnu/arch/loongarch/include/asm/efi.h
@@ -32,6 +32,4 @@ static inline unsigned long efi_get_kimg_min_align(void)
 
 #define EFI_KIMG_PREFERRED_ADDRESS	PHYSADDR(VMLINUX_LOAD_ADDRESS)
 
-unsigned long kernel_entry_address(void);
-
 #endif /* _ASM_LOONGARCH_EFI_H */
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/elf.h linux-libre-6.6.46-gnu/arch/loongarch/include/asm/elf.h
index b9a4ab54285c..f16bd42456e4 100644
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/elf.h
+++ linux-libre-6.6.46-gnu/arch/loongarch/include/asm/elf.h
@@ -241,8 +241,6 @@ void loongarch_dump_regs64(u64 *uregs, const struct pt_regs *regs);
 do {									\
 	current->thread.vdso = &vdso_info;				\
 									\
-	loongarch_set_personality_fcsr(state);				\
-									\
 	if (personality(current->personality) != PER_LINUX)		\
 		set_personality(PER_LINUX);				\
 } while (0)
@@ -259,7 +257,6 @@ do {									\
 	clear_thread_flag(TIF_32BIT_ADDR);				\
 									\
 	current->thread.vdso = &vdso_info;				\
-	loongarch_set_personality_fcsr(state);				\
 									\
 	p = personality(current->personality);				\
 	if (p != PER_LINUX32 && p != PER_LINUX)				\
@@ -293,7 +290,7 @@ extern const char *__elf_platform;
 #define ELF_PLAT_INIT(_r, load_addr)	do { \
 	_r->regs[1] = _r->regs[2] = _r->regs[3] = _r->regs[4] = 0;	\
 	_r->regs[5] = _r->regs[6] = _r->regs[7] = _r->regs[8] = 0;	\
-	_r->regs[9] = _r->regs[10] = _r->regs[11] = _r->regs[12] = 0;	\
+	_r->regs[9] = _r->regs[10] /* syscall n */ = _r->regs[12] = 0;	\
 	_r->regs[13] = _r->regs[14] = _r->regs[15] = _r->regs[16] = 0;	\
 	_r->regs[17] = _r->regs[18] = _r->regs[19] = _r->regs[20] = 0;	\
 	_r->regs[21] = _r->regs[22] = _r->regs[23] = _r->regs[24] = 0;	\
@@ -340,6 +337,4 @@ extern int arch_elf_pt_proc(void *ehdr, void *phdr, struct file *elf,
 extern int arch_check_elf(void *ehdr, bool has_interpreter, void *interp_ehdr,
 			  struct arch_elf_state *state);
 
-extern void loongarch_set_personality_fcsr(struct arch_elf_state *state);
-
 #endif /* _ASM_ELF_H */
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/hw_breakpoint.h linux-libre-6.6.46-gnu/arch/loongarch/include/asm/hw_breakpoint.h
index 21447fb1efc7..d78330916bd1 100644
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/hw_breakpoint.h
+++ linux-libre-6.6.46-gnu/arch/loongarch/include/asm/hw_breakpoint.h
@@ -75,6 +75,8 @@ do {								\
 #define CSR_MWPC_NUM		0x3f
 
 #define CTRL_PLV_ENABLE		0x1e
+#define CTRL_PLV0_ENABLE	0x02
+#define CTRL_PLV3_ENABLE	0x10
 
 #define MWPnCFG3_LoadEn		8
 #define MWPnCFG3_StoreEn	9
@@ -101,7 +103,7 @@ struct perf_event;
 struct perf_event_attr;
 
 extern int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
-				  int *gen_len, int *gen_type, int *offset);
+				  int *gen_len, int *gen_type);
 extern int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw);
 extern int hw_breakpoint_arch_parse(struct perf_event *bp,
 				    const struct perf_event_attr *attr,
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/io.h linux-libre-6.6.46-gnu/arch/loongarch/include/asm/io.h
index c486c2341b66..4a8adcca329b 100644
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/io.h
+++ linux-libre-6.6.46-gnu/arch/loongarch/include/asm/io.h
@@ -71,6 +71,8 @@ extern void __memcpy_fromio(void *to, const volatile void __iomem *from, size_t
 #define memcpy_fromio(a, c, l) __memcpy_fromio((a), (c), (l))
 #define memcpy_toio(c, a, l)   __memcpy_toio((c), (a), (l))
 
+#define __io_aw() mmiowb()
+
 #include <asm-generic/io.h>
 
 #define ARCH_HAS_VALID_PHYS_ADDR_RANGE
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/jump_label.h linux-libre-6.6.46-gnu/arch/loongarch/include/asm/jump_label.h
index 3cea299a5ef5..29acfe3de3fa 100644
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/jump_label.h
+++ linux-libre-6.6.46-gnu/arch/loongarch/include/asm/jump_label.h
@@ -22,7 +22,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key * const key, const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	nop			\n\t"
 		JUMP_TABLE_ENTRY
 		:  :  "i"(&((char *)key)[branch]) :  : l_yes);
@@ -35,7 +35,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key * const key, const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	b	%l[l_yes]	\n\t"
 		JUMP_TABLE_ENTRY
 		:  :  "i"(&((char *)key)[branch]) :  : l_yes);
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/numa.h linux-libre-6.6.46-gnu/arch/loongarch/include/asm/numa.h
index 27f319b49862..b5f9de9f102e 100644
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/numa.h
+++ linux-libre-6.6.46-gnu/arch/loongarch/include/asm/numa.h
@@ -56,6 +56,7 @@ extern int early_cpu_to_node(int cpu);
 static inline void early_numa_add_cpu(int cpuid, s16 node)	{ }
 static inline void numa_add_cpu(unsigned int cpu)		{ }
 static inline void numa_remove_cpu(unsigned int cpu)		{ }
+static inline void set_cpuid_to_node(int cpuid, s16 node)	{ }
 
 static inline int early_cpu_to_node(int cpu)
 {
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/percpu.h linux-libre-6.6.46-gnu/arch/loongarch/include/asm/percpu.h
index b9f567e66016..7e804140500f 100644
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/percpu.h
+++ linux-libre-6.6.46-gnu/arch/loongarch/include/asm/percpu.h
@@ -29,10 +29,15 @@ static inline void set_my_cpu_offset(unsigned long off)
 	__my_cpu_offset = off;
 	csr_write64(off, PERCPU_BASE_KS);
 }
-#define __my_cpu_offset __my_cpu_offset
+
+#define __my_cpu_offset					\
+({							\
+	__asm__ __volatile__("":"+r"(__my_cpu_offset));	\
+	__my_cpu_offset;				\
+})
 
 #define PERCPU_OP(op, asm_op, c_op)					\
-static inline unsigned long __percpu_##op(void *ptr,			\
+static __always_inline unsigned long __percpu_##op(void *ptr,		\
 			unsigned long val, int size)			\
 {									\
 	unsigned long ret;						\
@@ -63,7 +68,7 @@ PERCPU_OP(and, and, &)
 PERCPU_OP(or, or, |)
 #undef PERCPU_OP
 
-static inline unsigned long __percpu_read(void *ptr, int size)
+static __always_inline unsigned long __percpu_read(void *ptr, int size)
 {
 	unsigned long ret;
 
@@ -100,7 +105,7 @@ static inline unsigned long __percpu_read(void *ptr, int size)
 	return ret;
 }
 
-static inline void __percpu_write(void *ptr, unsigned long val, int size)
+static __always_inline void __percpu_write(void *ptr, unsigned long val, int size)
 {
 	switch (size) {
 	case 1:
@@ -132,8 +137,8 @@ static inline void __percpu_write(void *ptr, unsigned long val, int size)
 	}
 }
 
-static inline unsigned long __percpu_xchg(void *ptr, unsigned long val,
-						int size)
+static __always_inline unsigned long __percpu_xchg(void *ptr, unsigned long val,
+						   int size)
 {
 	switch (size) {
 	case 1:
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/perf_event.h linux-libre-6.6.46-gnu/arch/loongarch/include/asm/perf_event.h
index 2a35a0bc2aaa..f948a0676daf 100644
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/perf_event.h
+++ linux-libre-6.6.46-gnu/arch/loongarch/include/asm/perf_event.h
@@ -7,6 +7,13 @@
 #ifndef __LOONGARCH_PERF_EVENT_H__
 #define __LOONGARCH_PERF_EVENT_H__
 
+#include <asm/ptrace.h>
+
 #define perf_arch_bpf_user_pt_regs(regs) (struct user_pt_regs *)regs
 
+#define perf_arch_fetch_caller_regs(regs, __ip) { \
+	(regs)->csr_era = (__ip); \
+	(regs)->regs[3] = (unsigned long) __builtin_frame_address(0); \
+}
+
 #endif /* __LOONGARCH_PERF_EVENT_H__ */
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/qspinlock.h linux-libre-6.6.46-gnu/arch/loongarch/include/asm/qspinlock.h
deleted file mode 100644
index 34f43f8ad591..000000000000
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/qspinlock.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_QSPINLOCK_H
-#define _ASM_QSPINLOCK_H
-
-#include <asm-generic/qspinlock_types.h>
-
-#define queued_spin_unlock queued_spin_unlock
-
-static inline void queued_spin_unlock(struct qspinlock *lock)
-{
-	compiletime_assert_atomic_type(lock->locked);
-	c_sync();
-	WRITE_ONCE(lock->locked, 0);
-}
-
-#include <asm-generic/qspinlock.h>
-
-#endif /* _ASM_QSPINLOCK_H */
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/setup.h linux-libre-6.6.46-gnu/arch/loongarch/include/asm/setup.h
index a0bc159ce8bd..ee52fb1e9963 100644
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/setup.h
+++ linux-libre-6.6.46-gnu/arch/loongarch/include/asm/setup.h
@@ -25,7 +25,7 @@ extern void set_merr_handler(unsigned long offset, void *addr, unsigned long len
 #ifdef CONFIG_RELOCATABLE
 
 struct rela_la_abs {
-	long offset;
+	long pc;
 	long symvalue;
 };
 
diff --git linux-libre-6.6-gnu/arch/loongarch/include/asm/stackframe.h linux-libre-6.6.46-gnu/arch/loongarch/include/asm/stackframe.h
index 4fb1e6408b98..efc8c42290d0 100644
--- linux-libre-6.6-gnu/arch/loongarch/include/asm/stackframe.h
+++ linux-libre-6.6.46-gnu/arch/loongarch/include/asm/stackframe.h
@@ -41,7 +41,7 @@
 	.macro JUMP_VIRT_ADDR temp1 temp2
 	li.d	\temp1, CACHE_BASE
 	pcaddi	\temp2, 0
-	or	\temp1, \temp1, \temp2
+	bstrins.d  \temp1, \temp2, (DMW_PABITS - 1), 0
 	jirl	zero, \temp1, 0xc
 	.endm
 
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/acpi.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/acpi.c
index 8e00a754e548..55d6a48c76a8 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/acpi.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/acpi.c
@@ -29,11 +29,9 @@ int disabled_cpus;
 
 u64 acpi_saved_sp;
 
-#define MAX_CORE_PIC 256
-
 #define PREFIX			"ACPI: "
 
-struct acpi_madt_core_pic acpi_core_pic[NR_CPUS];
+struct acpi_madt_core_pic acpi_core_pic[MAX_CORE_PIC];
 
 void __init __iomem * __acpi_map_table(unsigned long phys, unsigned long size)
 {
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/efi.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/efi.c
index 9fc10cea21e1..de4f3def4af0 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/efi.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/efi.c
@@ -66,6 +66,12 @@ void __init efi_runtime_init(void)
 	set_bit(EFI_RUNTIME_SERVICES, &efi.flags);
 }
 
+bool efi_poweroff_required(void)
+{
+	return efi_enabled(EFI_RUNTIME_SERVICES) &&
+		(acpi_gbl_reduced_hardware || acpi_no_s5);
+}
+
 unsigned long __initdata screen_info_table = EFI_INVALID_TABLE_ADDR;
 
 static void __init init_screen_info(void)
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/elf.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/elf.c
index 183e94fc9c69..0fa81ced28dc 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/elf.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/elf.c
@@ -23,8 +23,3 @@ int arch_check_elf(void *_ehdr, bool has_interpreter, void *_interp_ehdr,
 {
 	return 0;
 }
-
-void loongarch_set_personality_fcsr(struct arch_elf_state *state)
-{
-	current->thread.fpu.fcsr = boot_cpu_data.fpu_csr0;
-}
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/ftrace_dyn.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/ftrace_dyn.c
index 73858c9029cc..bff058317062 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/ftrace_dyn.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/ftrace_dyn.c
@@ -287,6 +287,9 @@ void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
 	struct kprobe *p;
 	struct kprobe_ctlblk *kcb;
 
+	if (unlikely(kprobe_ftrace_disabled))
+		return;
+
 	bit = ftrace_test_recursion_trylock(ip, parent_ip);
 	if (bit < 0)
 		return;
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/head.S linux-libre-6.6.46-gnu/arch/loongarch/kernel/head.S
index 53b883db0786..e336fbc4eb96 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/head.S
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/head.S
@@ -22,7 +22,7 @@
 _head:
 	.word	MZ_MAGIC		/* "MZ", MS-DOS header */
 	.org	0x8
-	.dword	kernel_entry		/* Kernel entry point */
+	.dword	_kernel_entry		/* Kernel entry point (physical address) */
 	.dword	_kernel_asize		/* Kernel image effective size */
 	.quad	PHYS_LINK_KADDR		/* Kernel image load offset from start of RAM */
 	.org	0x38			/* 0x20 ~ 0x37 reserved */
@@ -34,7 +34,6 @@ pe_header:
 
 SYM_DATA(kernel_asize, .long _kernel_asize);
 SYM_DATA(kernel_fsize, .long _kernel_fsize);
-SYM_DATA(kernel_offset, .long _kernel_offset);
 
 #endif
 
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/hw_breakpoint.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/hw_breakpoint.c
index fc55c4de2a11..a6e4b605bfa8 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/hw_breakpoint.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/hw_breakpoint.c
@@ -174,11 +174,21 @@ void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
 static int hw_breakpoint_control(struct perf_event *bp,
 				 enum hw_breakpoint_ops ops)
 {
-	u32 ctrl;
+	u32 ctrl, privilege;
 	int i, max_slots, enable;
+	struct pt_regs *regs;
 	struct perf_event **slots;
 	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
 
+	if (arch_check_bp_in_kernelspace(info))
+		privilege = CTRL_PLV0_ENABLE;
+	else
+		privilege = CTRL_PLV3_ENABLE;
+
+	/*  Whether bp belongs to a task. */
+	if (bp->hw.target)
+		regs = task_pt_regs(bp->hw.target);
+
 	if (info->ctrl.type == LOONGARCH_BREAKPOINT_EXECUTE) {
 		/* Breakpoint */
 		slots = this_cpu_ptr(bp_on_reg);
@@ -197,31 +207,38 @@ static int hw_breakpoint_control(struct perf_event *bp,
 	switch (ops) {
 	case HW_BREAKPOINT_INSTALL:
 		/* Set the FWPnCFG/MWPnCFG 1~4 register. */
-		write_wb_reg(CSR_CFG_ADDR, i, 0, info->address);
-		write_wb_reg(CSR_CFG_ADDR, i, 1, info->address);
-		write_wb_reg(CSR_CFG_MASK, i, 0, info->mask);
-		write_wb_reg(CSR_CFG_MASK, i, 1, info->mask);
-		write_wb_reg(CSR_CFG_ASID, i, 0, 0);
-		write_wb_reg(CSR_CFG_ASID, i, 1, 0);
 		if (info->ctrl.type == LOONGARCH_BREAKPOINT_EXECUTE) {
-			write_wb_reg(CSR_CFG_CTRL, i, 0, CTRL_PLV_ENABLE);
+			write_wb_reg(CSR_CFG_ADDR, i, 0, info->address);
+			write_wb_reg(CSR_CFG_MASK, i, 0, info->mask);
+			write_wb_reg(CSR_CFG_ASID, i, 0, 0);
+			write_wb_reg(CSR_CFG_CTRL, i, 0, privilege);
 		} else {
+			write_wb_reg(CSR_CFG_ADDR, i, 1, info->address);
+			write_wb_reg(CSR_CFG_MASK, i, 1, info->mask);
+			write_wb_reg(CSR_CFG_ASID, i, 1, 0);
 			ctrl = encode_ctrl_reg(info->ctrl);
-			write_wb_reg(CSR_CFG_CTRL, i, 1, ctrl | CTRL_PLV_ENABLE);
+			write_wb_reg(CSR_CFG_CTRL, i, 1, ctrl | privilege);
 		}
 		enable = csr_read64(LOONGARCH_CSR_CRMD);
 		csr_write64(CSR_CRMD_WE | enable, LOONGARCH_CSR_CRMD);
+		if (bp->hw.target && test_tsk_thread_flag(bp->hw.target, TIF_LOAD_WATCH))
+			regs->csr_prmd |= CSR_PRMD_PWE;
 		break;
 	case HW_BREAKPOINT_UNINSTALL:
 		/* Reset the FWPnCFG/MWPnCFG 1~4 register. */
-		write_wb_reg(CSR_CFG_ADDR, i, 0, 0);
-		write_wb_reg(CSR_CFG_ADDR, i, 1, 0);
-		write_wb_reg(CSR_CFG_MASK, i, 0, 0);
-		write_wb_reg(CSR_CFG_MASK, i, 1, 0);
-		write_wb_reg(CSR_CFG_CTRL, i, 0, 0);
-		write_wb_reg(CSR_CFG_CTRL, i, 1, 0);
-		write_wb_reg(CSR_CFG_ASID, i, 0, 0);
-		write_wb_reg(CSR_CFG_ASID, i, 1, 0);
+		if (info->ctrl.type == LOONGARCH_BREAKPOINT_EXECUTE) {
+			write_wb_reg(CSR_CFG_ADDR, i, 0, 0);
+			write_wb_reg(CSR_CFG_MASK, i, 0, 0);
+			write_wb_reg(CSR_CFG_CTRL, i, 0, 0);
+			write_wb_reg(CSR_CFG_ASID, i, 0, 0);
+		} else {
+			write_wb_reg(CSR_CFG_ADDR, i, 1, 0);
+			write_wb_reg(CSR_CFG_MASK, i, 1, 0);
+			write_wb_reg(CSR_CFG_CTRL, i, 1, 0);
+			write_wb_reg(CSR_CFG_ASID, i, 1, 0);
+		}
+		if (bp->hw.target)
+			regs->csr_prmd &= ~CSR_PRMD_PWE;
 		break;
 	}
 
@@ -283,7 +300,7 @@ int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw)
  * to generic breakpoint descriptions.
  */
 int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
-			   int *gen_len, int *gen_type, int *offset)
+			   int *gen_len, int *gen_type)
 {
 	/* Type */
 	switch (ctrl.type) {
@@ -303,11 +320,6 @@ int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
 		return -EINVAL;
 	}
 
-	if (!ctrl.len)
-		return -EINVAL;
-
-	*offset = __ffs(ctrl.len);
-
 	/* Len */
 	switch (ctrl.len) {
 	case LOONGARCH_BREAKPOINT_LEN_1:
@@ -386,21 +398,17 @@ int hw_breakpoint_arch_parse(struct perf_event *bp,
 			     struct arch_hw_breakpoint *hw)
 {
 	int ret;
-	u64 alignment_mask, offset;
+	u64 alignment_mask;
 
 	/* Build the arch_hw_breakpoint. */
 	ret = arch_build_bp_info(bp, attr, hw);
 	if (ret)
 		return ret;
 
-	if (hw->ctrl.type != LOONGARCH_BREAKPOINT_EXECUTE)
-		alignment_mask = 0x7;
-	else
+	if (hw->ctrl.type == LOONGARCH_BREAKPOINT_EXECUTE) {
 		alignment_mask = 0x3;
-	offset = hw->address & alignment_mask;
-
-	hw->address &= ~alignment_mask;
-	hw->ctrl.len <<= offset;
+		hw->address &= ~alignment_mask;
+	}
 
 	return 0;
 }
@@ -471,12 +479,15 @@ void breakpoint_handler(struct pt_regs *regs)
 	slots = this_cpu_ptr(bp_on_reg);
 
 	for (i = 0; i < boot_cpu_data.watch_ireg_count; ++i) {
-		bp = slots[i];
-		if (bp == NULL)
-			continue;
-		perf_bp_event(bp, regs);
+		if ((csr_read32(LOONGARCH_CSR_FWPS) & (0x1 << i))) {
+			bp = slots[i];
+			if (bp == NULL)
+				continue;
+			perf_bp_event(bp, regs);
+			csr_write32(0x1 << i, LOONGARCH_CSR_FWPS);
+			update_bp_registers(regs, 0, 0);
+		}
 	}
-	update_bp_registers(regs, 0, 0);
 }
 NOKPROBE_SYMBOL(breakpoint_handler);
 
@@ -488,12 +499,15 @@ void watchpoint_handler(struct pt_regs *regs)
 	slots = this_cpu_ptr(wp_on_reg);
 
 	for (i = 0; i < boot_cpu_data.watch_dreg_count; ++i) {
-		wp = slots[i];
-		if (wp == NULL)
-			continue;
-		perf_bp_event(wp, regs);
+		if ((csr_read32(LOONGARCH_CSR_MWPS) & (0x1 << i))) {
+			wp = slots[i];
+			if (wp == NULL)
+				continue;
+			perf_bp_event(wp, regs);
+			csr_write32(0x1 << i, LOONGARCH_CSR_MWPS);
+			update_bp_registers(regs, 0, 1);
+		}
 	}
-	update_bp_registers(regs, 0, 1);
 }
 NOKPROBE_SYMBOL(watchpoint_handler);
 
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/image-vars.h linux-libre-6.6.46-gnu/arch/loongarch/kernel/image-vars.h
index e561989d02de..b12f8810f199 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/image-vars.h
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/image-vars.h
@@ -11,7 +11,6 @@ __efistub_strcmp		= strcmp;
 __efistub_kernel_entry		= kernel_entry;
 __efistub_kernel_asize		= kernel_asize;
 __efistub_kernel_fsize		= kernel_fsize;
-__efistub_kernel_offset		= kernel_offset;
 __efistub_screen_info		= screen_info;
 
 #endif
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/perf_event.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/perf_event.c
index 0491bf453cd4..cac7cba81b65 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/perf_event.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/perf_event.c
@@ -884,4 +884,4 @@ static int __init init_hw_perf_events(void)
 
 	return 0;
 }
-early_initcall(init_hw_perf_events);
+pure_initcall(init_hw_perf_events);
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/process.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/process.c
index 767d94cce0de..f2ff8b5d591e 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/process.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/process.c
@@ -85,6 +85,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp)
 	regs->csr_euen = euen;
 	lose_fpu(0);
 	lose_lbt(0);
+	current->thread.fpu.fcsr = boot_cpu_data.fpu_csr0;
 
 	clear_thread_flag(TIF_LSX_CTX_LIVE);
 	clear_thread_flag(TIF_LASX_CTX_LIVE);
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/ptrace.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/ptrace.c
index c114c5ef1332..19dc6eff45cc 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/ptrace.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/ptrace.c
@@ -494,28 +494,14 @@ static int ptrace_hbp_fill_attr_ctrl(unsigned int note_type,
 				     struct arch_hw_breakpoint_ctrl ctrl,
 				     struct perf_event_attr *attr)
 {
-	int err, len, type, offset;
+	int err, len, type;
 
-	err = arch_bp_generic_fields(ctrl, &len, &type, &offset);
+	err = arch_bp_generic_fields(ctrl, &len, &type);
 	if (err)
 		return err;
 
-	switch (note_type) {
-	case NT_LOONGARCH_HW_BREAK:
-		if ((type & HW_BREAKPOINT_X) != type)
-			return -EINVAL;
-		break;
-	case NT_LOONGARCH_HW_WATCH:
-		if ((type & HW_BREAKPOINT_RW) != type)
-			return -EINVAL;
-		break;
-	default:
-		return -EINVAL;
-	}
-
 	attr->bp_len	= len;
 	attr->bp_type	= type;
-	attr->bp_addr	+= offset;
 
 	return 0;
 }
@@ -603,16 +589,36 @@ static int ptrace_hbp_set_ctrl(unsigned int note_type,
 	struct perf_event *bp;
 	struct perf_event_attr attr;
 	struct arch_hw_breakpoint_ctrl ctrl;
+	struct thread_info *ti = task_thread_info(tsk);
 
 	bp = ptrace_hbp_get_initialised_bp(note_type, tsk, idx);
 	if (IS_ERR(bp))
 		return PTR_ERR(bp);
 
 	attr = bp->attr;
-	decode_ctrl_reg(uctrl, &ctrl);
-	err = ptrace_hbp_fill_attr_ctrl(note_type, ctrl, &attr);
-	if (err)
-		return err;
+
+	switch (note_type) {
+	case NT_LOONGARCH_HW_BREAK:
+		ctrl.type = LOONGARCH_BREAKPOINT_EXECUTE;
+		ctrl.len = LOONGARCH_BREAKPOINT_LEN_4;
+		break;
+	case NT_LOONGARCH_HW_WATCH:
+		decode_ctrl_reg(uctrl, &ctrl);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (uctrl & CTRL_PLV_ENABLE) {
+		err = ptrace_hbp_fill_attr_ctrl(note_type, ctrl, &attr);
+		if (err)
+			return err;
+		attr.disabled = 0;
+		set_ti_thread_flag(ti, TIF_LOAD_WATCH);
+	} else {
+		attr.disabled = 1;
+		clear_ti_thread_flag(ti, TIF_LOAD_WATCH);
+	}
 
 	return modify_user_hw_breakpoint(bp, &attr);
 }
@@ -643,6 +649,10 @@ static int ptrace_hbp_set_addr(unsigned int note_type,
 	struct perf_event *bp;
 	struct perf_event_attr attr;
 
+	/* Kernel-space address cannot be monitored by user-space */
+	if ((unsigned long)addr >= XKPRANGE)
+		return -EINVAL;
+
 	bp = ptrace_hbp_get_initialised_bp(note_type, tsk, idx);
 	if (IS_ERR(bp))
 		return PTR_ERR(bp);
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/relocate.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/relocate.c
index 6c3eff9af9fb..1acfa704c8d0 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/relocate.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/relocate.c
@@ -52,7 +52,7 @@ static inline void __init relocate_absolute(long random_offset)
 	for (p = begin; (void *)p < end; p++) {
 		long v = p->symvalue;
 		uint32_t lu12iw, ori, lu32id, lu52id;
-		union loongarch_instruction *insn = (void *)p - p->offset;
+		union loongarch_instruction *insn = (void *)p->pc;
 
 		lu12iw = (v >> 12) & 0xfffff;
 		ori    = v & 0xfff;
@@ -102,6 +102,14 @@ static inline __init unsigned long get_random_boot(void)
 	return hash;
 }
 
+static int __init nokaslr(char *p)
+{
+	pr_info("KASLR is disabled.\n");
+
+	return 0; /* Print a notice and silence the boot warning */
+}
+early_param("nokaslr", nokaslr);
+
 static inline __init bool kaslr_disabled(void)
 {
 	char *str;
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/setup.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/setup.c
index aed65915e932..6748d7f3f221 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/setup.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/setup.c
@@ -57,7 +57,9 @@
 #define SMBIOS_CORE_PACKAGE_OFFSET	0x23
 #define LOONGSON_EFI_ENABLE		(1 << 3)
 
+#ifdef CONFIG_EFI
 struct screen_info screen_info __section(".data");
+#endif
 
 unsigned long fw_arg0, fw_arg1, fw_arg2;
 DEFINE_PER_CPU(unsigned long, kernelsp);
@@ -367,6 +369,8 @@ void __init platform_init(void)
 	acpi_gbl_use_default_register_widths = false;
 	acpi_boot_table_init();
 #endif
+
+	early_init_fdt_scan_reserved_mem();
 	unflatten_and_copy_device_tree();
 
 #ifdef CONFIG_NUMA
@@ -400,8 +404,6 @@ static void __init arch_mem_init(char **cmdline_p)
 
 	check_kernel_sections_mem();
 
-	early_init_fdt_scan_reserved_mem();
-
 	/*
 	 * In order to reduce the possibility of kernel panic when failed to
 	 * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/smp.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/smp.c
index ef35c871244f..d74dfe1206ed 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/smp.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/smp.c
@@ -88,6 +88,73 @@ void show_ipi_list(struct seq_file *p, int prec)
 	}
 }
 
+static inline void set_cpu_core_map(int cpu)
+{
+	int i;
+
+	cpumask_set_cpu(cpu, &cpu_core_setup_map);
+
+	for_each_cpu(i, &cpu_core_setup_map) {
+		if (cpu_data[cpu].package == cpu_data[i].package) {
+			cpumask_set_cpu(i, &cpu_core_map[cpu]);
+			cpumask_set_cpu(cpu, &cpu_core_map[i]);
+		}
+	}
+}
+
+static inline void set_cpu_sibling_map(int cpu)
+{
+	int i;
+
+	cpumask_set_cpu(cpu, &cpu_sibling_setup_map);
+
+	for_each_cpu(i, &cpu_sibling_setup_map) {
+		if (cpus_are_siblings(cpu, i)) {
+			cpumask_set_cpu(i, &cpu_sibling_map[cpu]);
+			cpumask_set_cpu(cpu, &cpu_sibling_map[i]);
+		}
+	}
+}
+
+static inline void clear_cpu_sibling_map(int cpu)
+{
+	int i;
+
+	for_each_cpu(i, &cpu_sibling_setup_map) {
+		if (cpus_are_siblings(cpu, i)) {
+			cpumask_clear_cpu(i, &cpu_sibling_map[cpu]);
+			cpumask_clear_cpu(cpu, &cpu_sibling_map[i]);
+		}
+	}
+
+	cpumask_clear_cpu(cpu, &cpu_sibling_setup_map);
+}
+
+/*
+ * Calculate a new cpu_foreign_map mask whenever a
+ * new cpu appears or disappears.
+ */
+void calculate_cpu_foreign_map(void)
+{
+	int i, k, core_present;
+	cpumask_t temp_foreign_map;
+
+	/* Re-calculate the mask */
+	cpumask_clear(&temp_foreign_map);
+	for_each_online_cpu(i) {
+		core_present = 0;
+		for_each_cpu(k, &temp_foreign_map)
+			if (cpus_are_siblings(i, k))
+				core_present = 1;
+		if (!core_present)
+			cpumask_set_cpu(i, &temp_foreign_map);
+	}
+
+	for_each_online_cpu(i)
+		cpumask_andnot(&cpu_foreign_map[i],
+			       &temp_foreign_map, &cpu_sibling_map[i]);
+}
+
 /* Send mailbox buffer via Mail_Send */
 static void csr_mail_send(uint64_t data, int cpu, int mailbox)
 {
@@ -195,7 +262,6 @@ static void __init fdt_smp_setup(void)
 
 		if (cpuid == loongson_sysconf.boot_cpu_id) {
 			cpu = 0;
-			numa_add_cpu(cpu);
 		} else {
 			cpu = cpumask_next_zero(-1, cpu_present_mask);
 		}
@@ -205,6 +271,9 @@ static void __init fdt_smp_setup(void)
 		set_cpu_present(cpu, true);
 		__cpu_number_map[cpuid] = cpu;
 		__cpu_logical_map[cpu] = cpuid;
+
+		early_numa_add_cpu(cpu, 0);
+		set_cpuid_to_node(cpuid, 0);
 	}
 
 	loongson_sysconf.nr_cpus = num_processors;
@@ -300,6 +369,7 @@ int loongson_cpu_disable(void)
 	numa_remove_cpu(cpu);
 #endif
 	set_cpu_online(cpu, false);
+	clear_cpu_sibling_map(cpu);
 	calculate_cpu_foreign_map();
 	local_irq_save(flags);
 	irq_migrate_all_off_this_cpu();
@@ -334,6 +404,7 @@ void __noreturn arch_cpu_idle_dead(void)
 		addr = iocsr_read64(LOONGARCH_IOCSR_MBUF0);
 	} while (addr == 0);
 
+	local_irq_disable();
 	init_fn = (void *)TO_CACHE(addr);
 	iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_CLEAR);
 
@@ -376,59 +447,6 @@ static int __init ipi_pm_init(void)
 core_initcall(ipi_pm_init);
 #endif
 
-static inline void set_cpu_sibling_map(int cpu)
-{
-	int i;
-
-	cpumask_set_cpu(cpu, &cpu_sibling_setup_map);
-
-	for_each_cpu(i, &cpu_sibling_setup_map) {
-		if (cpus_are_siblings(cpu, i)) {
-			cpumask_set_cpu(i, &cpu_sibling_map[cpu]);
-			cpumask_set_cpu(cpu, &cpu_sibling_map[i]);
-		}
-	}
-}
-
-static inline void set_cpu_core_map(int cpu)
-{
-	int i;
-
-	cpumask_set_cpu(cpu, &cpu_core_setup_map);
-
-	for_each_cpu(i, &cpu_core_setup_map) {
-		if (cpu_data[cpu].package == cpu_data[i].package) {
-			cpumask_set_cpu(i, &cpu_core_map[cpu]);
-			cpumask_set_cpu(cpu, &cpu_core_map[i]);
-		}
-	}
-}
-
-/*
- * Calculate a new cpu_foreign_map mask whenever a
- * new cpu appears or disappears.
- */
-void calculate_cpu_foreign_map(void)
-{
-	int i, k, core_present;
-	cpumask_t temp_foreign_map;
-
-	/* Re-calculate the mask */
-	cpumask_clear(&temp_foreign_map);
-	for_each_online_cpu(i) {
-		core_present = 0;
-		for_each_cpu(k, &temp_foreign_map)
-			if (cpus_are_siblings(i, k))
-				core_present = 1;
-		if (!core_present)
-			cpumask_set_cpu(i, &temp_foreign_map);
-	}
-
-	for_each_online_cpu(i)
-		cpumask_andnot(&cpu_foreign_map[i],
-			       &temp_foreign_map, &cpu_sibling_map[i]);
-}
-
 /* Preload SMP state for boot cpu */
 void smp_prepare_boot_cpu(void)
 {
@@ -437,6 +455,7 @@ void smp_prepare_boot_cpu(void)
 	set_cpu_possible(0, true);
 	set_cpu_online(0, true);
 	set_my_cpu_offset(per_cpu_offset(0));
+	numa_add_cpu(0);
 
 	rr_node = first_node(node_online_map);
 	for_each_possible_cpu(cpu) {
@@ -504,7 +523,7 @@ asmlinkage void start_secondary(void)
 	unsigned int cpu;
 
 	sync_counter();
-	cpu = smp_processor_id();
+	cpu = raw_smp_processor_id();
 	set_my_cpu_offset(per_cpu_offset(cpu));
 
 	cpu_probe();
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/stacktrace.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/stacktrace.c
index 92270f14db94..f623feb2129f 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/stacktrace.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/stacktrace.c
@@ -32,7 +32,7 @@ void arch_stack_walk(stack_trace_consume_fn consume_entry, void *cookie,
 	}
 
 	for (unwind_start(&state, task, regs);
-	     !unwind_done(&state) && !unwind_error(&state); unwind_next_frame(&state)) {
+	     !unwind_done(&state); unwind_next_frame(&state)) {
 		addr = unwind_get_return_address(&state);
 		if (!addr || !consume_entry(cookie, addr))
 			break;
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/time.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/time.c
index 3064af94db9c..e7015f7b70e3 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/time.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/time.c
@@ -58,14 +58,16 @@ static int constant_set_state_oneshot(struct clock_event_device *evt)
 	return 0;
 }
 
-static int constant_set_state_oneshot_stopped(struct clock_event_device *evt)
+static int constant_set_state_periodic(struct clock_event_device *evt)
 {
+	unsigned long period;
 	unsigned long timer_config;
 
 	raw_spin_lock(&state_lock);
 
-	timer_config = csr_read64(LOONGARCH_CSR_TCFG);
-	timer_config &= ~CSR_TCFG_EN;
+	period = const_clock_freq / HZ;
+	timer_config = period & CSR_TCFG_VAL;
+	timer_config |= (CSR_TCFG_PERIOD | CSR_TCFG_EN);
 	csr_write64(timer_config, LOONGARCH_CSR_TCFG);
 
 	raw_spin_unlock(&state_lock);
@@ -73,16 +75,14 @@ static int constant_set_state_oneshot_stopped(struct clock_event_device *evt)
 	return 0;
 }
 
-static int constant_set_state_periodic(struct clock_event_device *evt)
+static int constant_set_state_shutdown(struct clock_event_device *evt)
 {
-	unsigned long period;
 	unsigned long timer_config;
 
 	raw_spin_lock(&state_lock);
 
-	period = const_clock_freq / HZ;
-	timer_config = period & CSR_TCFG_VAL;
-	timer_config |= (CSR_TCFG_PERIOD | CSR_TCFG_EN);
+	timer_config = csr_read64(LOONGARCH_CSR_TCFG);
+	timer_config &= ~CSR_TCFG_EN;
 	csr_write64(timer_config, LOONGARCH_CSR_TCFG);
 
 	raw_spin_unlock(&state_lock);
@@ -90,11 +90,6 @@ static int constant_set_state_periodic(struct clock_event_device *evt)
 	return 0;
 }
 
-static int constant_set_state_shutdown(struct clock_event_device *evt)
-{
-	return 0;
-}
-
 static int constant_timer_next_event(unsigned long delta, struct clock_event_device *evt)
 {
 	unsigned long timer_config;
@@ -161,7 +156,7 @@ int constant_clockevent_init(void)
 	cd->rating = 320;
 	cd->cpumask = cpumask_of(cpu);
 	cd->set_state_oneshot = constant_set_state_oneshot;
-	cd->set_state_oneshot_stopped = constant_set_state_oneshot_stopped;
+	cd->set_state_oneshot_stopped = constant_set_state_shutdown;
 	cd->set_state_periodic = constant_set_state_periodic;
 	cd->set_state_shutdown = constant_set_state_shutdown;
 	cd->set_next_event = constant_timer_next_event;
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/unwind.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/unwind.c
index ba324ba76fa1..a463d6961344 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/unwind.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/unwind.c
@@ -28,6 +28,5 @@ bool default_next_frame(struct unwind_state *state)
 
 	} while (!get_stack_info(state->sp, state->task, info));
 
-	state->error = true;
 	return false;
 }
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/unwind_prologue.c linux-libre-6.6.46-gnu/arch/loongarch/kernel/unwind_prologue.c
index 55afc27320e1..929ae240280a 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/unwind_prologue.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/unwind_prologue.c
@@ -227,7 +227,7 @@ static bool next_frame(struct unwind_state *state)
 	} while (!get_stack_info(state->sp, state->task, info));
 
 out:
-	state->error = true;
+	state->stack_info.type = STACK_TYPE_UNKNOWN;
 	return false;
 }
 
diff --git linux-libre-6.6-gnu/arch/loongarch/kernel/vmlinux.lds.S linux-libre-6.6.46-gnu/arch/loongarch/kernel/vmlinux.lds.S
index bb2ec86f37a8..d5afd0c80a49 100644
--- linux-libre-6.6-gnu/arch/loongarch/kernel/vmlinux.lds.S
+++ linux-libre-6.6.46-gnu/arch/loongarch/kernel/vmlinux.lds.S
@@ -5,6 +5,7 @@
 
 #define PAGE_SIZE _PAGE_SIZE
 #define RO_EXCEPTION_TABLE_ALIGN	4
+#define PHYSADDR_MASK			0xffffffffffff /* 48-bit */
 
 /*
  * Put .bss..swapper_pg_dir as the first thing in .bss. This will
@@ -139,11 +140,11 @@ SECTIONS
 
 #ifdef CONFIG_EFI_STUB
 	/* header symbols */
-	_kernel_asize = _end - _text;
-	_kernel_fsize = _edata - _text;
-	_kernel_vsize = _end - __initdata_begin;
-	_kernel_rsize = _edata - __initdata_begin;
-	_kernel_offset = kernel_offset - _text;
+	_kernel_entry = ABSOLUTE(kernel_entry & PHYSADDR_MASK);
+	_kernel_asize = ABSOLUTE(_end - _text);
+	_kernel_fsize = ABSOLUTE(_edata - _text);
+	_kernel_vsize = ABSOLUTE(_end - __initdata_begin);
+	_kernel_rsize = ABSOLUTE(_edata - __initdata_begin);
 #endif
 
 	.gptab.sdata : {
diff --git linux-libre-6.6-gnu/arch/loongarch/mm/fault.c linux-libre-6.6.46-gnu/arch/loongarch/mm/fault.c
index 1fc2f6813ea0..97b40defde06 100644
--- linux-libre-6.6-gnu/arch/loongarch/mm/fault.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/mm/fault.c
@@ -202,10 +202,10 @@ good_area:
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
 	} else {
-		if (!(vma->vm_flags & VM_READ) && address != exception_era(regs))
-			goto bad_area;
 		if (!(vma->vm_flags & VM_EXEC) && address == exception_era(regs))
 			goto bad_area;
+		if (!(vma->vm_flags & (VM_READ | VM_WRITE)) && address != exception_era(regs))
+			goto bad_area;
 	}
 
 	/*
diff --git linux-libre-6.6-gnu/arch/loongarch/mm/kasan_init.c linux-libre-6.6.46-gnu/arch/loongarch/mm/kasan_init.c
index cc3e81fe0186..c608adc99845 100644
--- linux-libre-6.6-gnu/arch/loongarch/mm/kasan_init.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/mm/kasan_init.c
@@ -44,6 +44,9 @@ void *kasan_mem_to_shadow(const void *addr)
 		unsigned long xrange = (maddr >> XRANGE_SHIFT) & 0xffff;
 		unsigned long offset = 0;
 
+		if (maddr >= FIXADDR_START)
+			return (void *)(kasan_early_shadow_page);
+
 		maddr &= XRANGE_SHADOW_MASK;
 		switch (xrange) {
 		case XKPRANGE_CC_SEG:
diff --git linux-libre-6.6-gnu/arch/loongarch/mm/pgtable.c linux-libre-6.6.46-gnu/arch/loongarch/mm/pgtable.c
index 71d0539e2d0b..2aae72e63871 100644
--- linux-libre-6.6-gnu/arch/loongarch/mm/pgtable.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/mm/pgtable.c
@@ -13,13 +13,13 @@ struct page *dmw_virt_to_page(unsigned long kaddr)
 {
 	return pfn_to_page(virt_to_pfn(kaddr));
 }
-EXPORT_SYMBOL_GPL(dmw_virt_to_page);
+EXPORT_SYMBOL(dmw_virt_to_page);
 
 struct page *tlb_virt_to_page(unsigned long kaddr)
 {
 	return pfn_to_page(pte_pfn(*virt_to_kpte(kaddr)));
 }
-EXPORT_SYMBOL_GPL(tlb_virt_to_page);
+EXPORT_SYMBOL(tlb_virt_to_page);
 
 pgd_t *pgd_alloc(struct mm_struct *mm)
 {
diff --git linux-libre-6.6-gnu/arch/loongarch/mm/tlb.c linux-libre-6.6.46-gnu/arch/loongarch/mm/tlb.c
index 2c0a411f23aa..56bf1dd5358a 100644
--- linux-libre-6.6-gnu/arch/loongarch/mm/tlb.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/mm/tlb.c
@@ -284,12 +284,16 @@ static void setup_tlb_handler(int cpu)
 		set_handler(EXCCODE_TLBNR * VECSIZE, handle_tlb_protect, VECSIZE);
 		set_handler(EXCCODE_TLBNX * VECSIZE, handle_tlb_protect, VECSIZE);
 		set_handler(EXCCODE_TLBPE * VECSIZE, handle_tlb_protect, VECSIZE);
-	}
+	} else {
+		int vec_sz __maybe_unused;
+		void *addr __maybe_unused;
+		struct page *page __maybe_unused;
+
+		/* Avoid lockdep warning */
+		rcu_cpu_starting(cpu);
+
 #ifdef CONFIG_NUMA
-	else {
-		void *addr;
-		struct page *page;
-		const int vec_sz = sizeof(exception_handlers);
+		vec_sz = sizeof(exception_handlers);
 
 		if (pcpu_handlers[cpu])
 			return;
@@ -305,8 +309,8 @@ static void setup_tlb_handler(int cpu)
 		csr_write64(pcpu_handlers[cpu], LOONGARCH_CSR_EENTRY);
 		csr_write64(pcpu_handlers[cpu], LOONGARCH_CSR_MERRENTRY);
 		csr_write64(pcpu_handlers[cpu] + 80*VECSIZE, LOONGARCH_CSR_TLBRENTRY);
-	}
 #endif
+	}
 }
 
 void tlb_init(int cpu)
diff --git linux-libre-6.6-gnu/arch/loongarch/net/bpf_jit.c linux-libre-6.6.46-gnu/arch/loongarch/net/bpf_jit.c
index db9342b2d0e6..9eb7753d117d 100644
--- linux-libre-6.6-gnu/arch/loongarch/net/bpf_jit.c
+++ linux-libre-6.6.46-gnu/arch/loongarch/net/bpf_jit.c
@@ -461,7 +461,6 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 	const u8 dst = regmap[insn->dst_reg];
 	const s16 off = insn->off;
 	const s32 imm = insn->imm;
-	const u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm;
 	const bool is32 = BPF_CLASS(insn->code) == BPF_ALU || BPF_CLASS(insn->code) == BPF_JMP32;
 
 	switch (code) {
@@ -855,8 +854,6 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 
 	/* function return */
 	case BPF_JMP | BPF_EXIT:
-		emit_sext_32(ctx, regmap[BPF_REG_0], true);
-
 		if (i == ctx->prog->len - 1)
 			break;
 
@@ -867,8 +864,12 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 
 	/* dst = imm64 */
 	case BPF_LD | BPF_IMM | BPF_DW:
+	{
+		const u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm;
+
 		move_imm(ctx, dst, imm64, is32);
 		return 1;
+	}
 
 	/* dst = *(size *)(src + off) */
 	case BPF_LDX | BPF_MEM | BPF_B:
@@ -907,14 +908,8 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 			}
 			break;
 		case BPF_DW:
-			if (is_signed_imm12(off)) {
-				emit_insn(ctx, ldd, dst, src, off);
-			} else if (is_signed_imm14(off)) {
-				emit_insn(ctx, ldptrd, dst, src, off);
-			} else {
-				move_imm(ctx, t1, off, is32);
-				emit_insn(ctx, ldxd, dst, src, t1);
-			}
+			move_imm(ctx, t1, off, is32);
+			emit_insn(ctx, ldxd, dst, src, t1);
 			break;
 		}
 
diff --git linux-libre-6.6-gnu/arch/loongarch/vdso/Makefile linux-libre-6.6.46-gnu/arch/loongarch/vdso/Makefile
index 5c97d1463328..f597cd08a96b 100644
--- linux-libre-6.6-gnu/arch/loongarch/vdso/Makefile
+++ linux-libre-6.6.46-gnu/arch/loongarch/vdso/Makefile
@@ -2,6 +2,7 @@
 # Objects to go into the VDSO.
 
 KASAN_SANITIZE := n
+UBSAN_SANITIZE := n
 KCOV_INSTRUMENT := n
 
 # Include the generic Makefile to check the built vdso.
@@ -83,13 +84,3 @@ $(obj)/vdso.so: $(obj)/vdso.so.dbg FORCE
 obj-y += vdso.o
 
 $(obj)/vdso.o : $(obj)/vdso.so
-
-# install commands for the unstripped file
-quiet_cmd_vdso_install = INSTALL $@
-      cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
-
-vdso.so: $(obj)/vdso.so.dbg
-	@mkdir -p $(MODLIB)/vdso
-	$(call cmd,vdso_install)
-
-vdso_install: vdso.so
diff --git linux-libre-6.6-gnu/arch/m68k/amiga/config.c linux-libre-6.6.46-gnu/arch/m68k/amiga/config.c
index 3137b45750df..b7cb28f5ee29 100644
--- linux-libre-6.6-gnu/arch/m68k/amiga/config.c
+++ linux-libre-6.6.46-gnu/arch/m68k/amiga/config.c
@@ -180,6 +180,15 @@ int __init amiga_parse_bootinfo(const struct bi_record *record)
 			dev->slotsize = be16_to_cpu(cd->cd_SlotSize);
 			dev->boardaddr = be32_to_cpu(cd->cd_BoardAddr);
 			dev->boardsize = be32_to_cpu(cd->cd_BoardSize);
+
+			/* CS-LAB Warp 1260 workaround */
+			if (be16_to_cpu(dev->rom.er_Manufacturer) == ZORRO_MANUF(ZORRO_PROD_CSLAB_WARP_1260) &&
+			    dev->rom.er_Product == ZORRO_PROD(ZORRO_PROD_CSLAB_WARP_1260)) {
+
+				/* turn off all interrupts */
+				pr_info("Warp 1260 card detected: applying interrupt storm workaround\n");
+				*(uint32_t *)(dev->boardaddr + 0x1000) = 0xfff;
+			}
 		} else
 			pr_warn("amiga_parse_bootinfo: too many AutoConfig devices\n");
 #endif /* CONFIG_ZORRO */
diff --git linux-libre-6.6-gnu/arch/m68k/atari/ataints.c linux-libre-6.6.46-gnu/arch/m68k/atari/ataints.c
index 56f02ea2c248..715d1e0d973e 100644
--- linux-libre-6.6-gnu/arch/m68k/atari/ataints.c
+++ linux-libre-6.6.46-gnu/arch/m68k/atari/ataints.c
@@ -302,11 +302,7 @@ void __init atari_init_IRQ(void)
 
 	if (ATARIHW_PRESENT(SCU)) {
 		/* init the SCU if present */
-		tt_scu.sys_mask = 0x10;		/* enable VBL (for the cursor) and
-									 * disable HSYNC interrupts (who
-									 * needs them?)  MFP and SCC are
-									 * enabled in VME mask
-									 */
+		tt_scu.sys_mask = 0x0;		/* disable all interrupts */
 		tt_scu.vme_mask = 0x60;		/* enable MFP and SCC ints */
 	} else {
 		/* If no SCU and no Hades, the HSYNC interrupt needs to be
diff --git linux-libre-6.6-gnu/arch/m68k/include/asm/cacheflush_mm.h linux-libre-6.6.46-gnu/arch/m68k/include/asm/cacheflush_mm.h
index ed12358c4783..9a71b0148461 100644
--- linux-libre-6.6-gnu/arch/m68k/include/asm/cacheflush_mm.h
+++ linux-libre-6.6.46-gnu/arch/m68k/include/asm/cacheflush_mm.h
@@ -191,6 +191,7 @@ extern void cache_push_v(unsigned long vaddr, int len);
 #define flush_cache_all() __flush_cache_all()
 
 #define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
 static inline void flush_cache_mm(struct mm_struct *mm)
diff --git linux-libre-6.6-gnu/arch/m68k/include/asm/cmpxchg.h linux-libre-6.6.46-gnu/arch/m68k/include/asm/cmpxchg.h
index d7f3de9c5d6f..4ba14f3535fc 100644
--- linux-libre-6.6-gnu/arch/m68k/include/asm/cmpxchg.h
+++ linux-libre-6.6.46-gnu/arch/m68k/include/asm/cmpxchg.h
@@ -32,7 +32,7 @@ static inline unsigned long __arch_xchg(unsigned long x, volatile void * ptr, in
 		x = tmp;
 		break;
 	default:
-		tmp = __invalid_xchg_size(x, ptr, size);
+		x = __invalid_xchg_size(x, ptr, size);
 		break;
 	}
 
diff --git linux-libre-6.6-gnu/arch/m68k/kernel/entry.S linux-libre-6.6.46-gnu/arch/m68k/kernel/entry.S
index 4dd2fd7acba9..2e1e9ad4f98c 100644
--- linux-libre-6.6-gnu/arch/m68k/kernel/entry.S
+++ linux-libre-6.6.46-gnu/arch/m68k/kernel/entry.S
@@ -433,7 +433,9 @@ resume:
 	movec	%a0,%dfc
 
 	/* restore status register */
-	movew	%a1@(TASK_THREAD+THREAD_SR),%sr
+	movew	%a1@(TASK_THREAD+THREAD_SR),%d0
+	oriw	#0x0700,%d0
+	movew	%d0,%sr
 
 	rts
 
diff --git linux-libre-6.6-gnu/arch/m68k/mac/misc.c linux-libre-6.6.46-gnu/arch/m68k/mac/misc.c
index c7cb29f0ff01..29e06f46ab51 100644
--- linux-libre-6.6-gnu/arch/m68k/mac/misc.c
+++ linux-libre-6.6.46-gnu/arch/m68k/mac/misc.c
@@ -451,30 +451,18 @@ void mac_poweroff(void)
 
 void mac_reset(void)
 {
-	if (macintosh_config->adb_type == MAC_ADB_II &&
-	    macintosh_config->ident != MAC_MODEL_SE30) {
-		/* need ROMBASE in booter */
-		/* indeed, plus need to MAP THE ROM !! */
-
-		if (mac_bi_data.rombase == 0)
-			mac_bi_data.rombase = 0x40800000;
-
-		/* works on some */
-		rom_reset = (void *) (mac_bi_data.rombase + 0xa);
-
-		local_irq_disable();
-		rom_reset();
 #ifdef CONFIG_ADB_CUDA
-	} else if (macintosh_config->adb_type == MAC_ADB_EGRET ||
-	           macintosh_config->adb_type == MAC_ADB_CUDA) {
+	if (macintosh_config->adb_type == MAC_ADB_EGRET ||
+	    macintosh_config->adb_type == MAC_ADB_CUDA) {
 		cuda_restart();
+	} else
 #endif
 #ifdef CONFIG_ADB_PMU
-	} else if (macintosh_config->adb_type == MAC_ADB_PB2) {
+	if (macintosh_config->adb_type == MAC_ADB_PB2) {
 		pmu_restart();
+	} else
 #endif
-	} else if (CPU_IS_030) {
-
+	if (CPU_IS_030) {
 		/* 030-specific reset routine.  The idea is general, but the
 		 * specific registers to reset are '030-specific.  Until I
 		 * have a non-030 machine, I can't test anything else.
@@ -522,6 +510,18 @@ void mac_reset(void)
 		    "jmp %/a0@\n\t" /* jump to the reset vector */
 		    ".chip 68k"
 		    : : "r" (offset), "a" (rombase) : "a0");
+	} else {
+		/* need ROMBASE in booter */
+		/* indeed, plus need to MAP THE ROM !! */
+
+		if (mac_bi_data.rombase == 0)
+			mac_bi_data.rombase = 0x40800000;
+
+		/* works on some */
+		rom_reset = (void *)(mac_bi_data.rombase + 0xa);
+
+		local_irq_disable();
+		rom_reset();
 	}
 
 	/* should never get here */
diff --git linux-libre-6.6-gnu/arch/microblaze/kernel/Makefile linux-libre-6.6.46-gnu/arch/microblaze/kernel/Makefile
index 4393bee64eaf..85c4d29ef43e 100644
--- linux-libre-6.6-gnu/arch/microblaze/kernel/Makefile
+++ linux-libre-6.6.46-gnu/arch/microblaze/kernel/Makefile
@@ -7,7 +7,6 @@ ifdef CONFIG_FUNCTION_TRACER
 # Do not trace early boot code and low level code
 CFLAGS_REMOVE_timer.o = -pg
 CFLAGS_REMOVE_intc.o = -pg
-CFLAGS_REMOVE_early_printk.o = -pg
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_process.o = -pg
 endif
diff --git linux-libre-6.6-gnu/arch/microblaze/kernel/cpu/cpuinfo-static.c linux-libre-6.6.46-gnu/arch/microblaze/kernel/cpu/cpuinfo-static.c
index 85dbda4a08a8..03da36dc6d9c 100644
--- linux-libre-6.6-gnu/arch/microblaze/kernel/cpu/cpuinfo-static.c
+++ linux-libre-6.6.46-gnu/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -18,7 +18,7 @@ static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
 static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
 
 #define err_printk(x) \
-	early_printk("ERROR: Microblaze " x "-different for kernel and DTS\n");
+	pr_err("ERROR: Microblaze " x "-different for kernel and DTS\n");
 
 void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
 {
diff --git linux-libre-6.6-gnu/arch/mips/Kconfig linux-libre-6.6.46-gnu/arch/mips/Kconfig
index bc8421859006..91c3a502156b 100644
--- linux-libre-6.6-gnu/arch/mips/Kconfig
+++ linux-libre-6.6.46-gnu/arch/mips/Kconfig
@@ -482,6 +482,7 @@ config MACH_LOONGSON2EF
 
 config MACH_LOONGSON64
 	bool "Loongson 64-bit family of machines"
+	select ARCH_DMA_DEFAULT_COHERENT
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
@@ -1273,6 +1274,7 @@ config CPU_LOONGSON64
 	select CPU_SUPPORTS_MSA
 	select CPU_DIEI_BROKEN if !LOONGSON3_ENHANCEMENT
 	select CPU_MIPSR2_IRQ_VI
+	select DMA_NONCOHERENT
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
 	select MIPS_ASID_BITS_VARIABLE
diff --git linux-libre-6.6-gnu/arch/mips/alchemy/devboards/db1200.c linux-libre-6.6.46-gnu/arch/mips/alchemy/devboards/db1200.c
index f521874ebb07..67f067706af2 100644
--- linux-libre-6.6-gnu/arch/mips/alchemy/devboards/db1200.c
+++ linux-libre-6.6.46-gnu/arch/mips/alchemy/devboards/db1200.c
@@ -847,7 +847,7 @@ int __init db1200_dev_setup(void)
 	i2c_register_board_info(0, db1200_i2c_devs,
 				ARRAY_SIZE(db1200_i2c_devs));
 	spi_register_board_info(db1200_spi_devs,
-				ARRAY_SIZE(db1200_i2c_devs));
+				ARRAY_SIZE(db1200_spi_devs));
 
 	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C	 ON=SPI)
 	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
diff --git linux-libre-6.6-gnu/arch/mips/alchemy/devboards/db1550.c linux-libre-6.6.46-gnu/arch/mips/alchemy/devboards/db1550.c
index fd91d9c9a252..6c6837181f55 100644
--- linux-libre-6.6-gnu/arch/mips/alchemy/devboards/db1550.c
+++ linux-libre-6.6.46-gnu/arch/mips/alchemy/devboards/db1550.c
@@ -589,7 +589,7 @@ int __init db1550_dev_setup(void)
 	i2c_register_board_info(0, db1550_i2c_devs,
 				ARRAY_SIZE(db1550_i2c_devs));
 	spi_register_board_info(db1550_spi_devs,
-				ARRAY_SIZE(db1550_i2c_devs));
+				ARRAY_SIZE(db1550_spi_devs));
 
 	c = clk_get(NULL, "psc0_intclk");
 	if (!IS_ERR(c)) {
diff --git linux-libre-6.6-gnu/arch/mips/bmips/setup.c linux-libre-6.6.46-gnu/arch/mips/bmips/setup.c
index ec180ab92eaa..66a8ba19c287 100644
--- linux-libre-6.6-gnu/arch/mips/bmips/setup.c
+++ linux-libre-6.6.46-gnu/arch/mips/bmips/setup.c
@@ -110,7 +110,8 @@ static void bcm6358_quirks(void)
 	 * RAC flush causes kernel panics on BCM6358 when booting from TP1
 	 * because the bootloader is not initializing it properly.
 	 */
-	bmips_rac_flush_disable = !!(read_c0_brcm_cmt_local() & (1 << 31));
+	bmips_rac_flush_disable = !!(read_c0_brcm_cmt_local() & (1 << 31)) ||
+				  !!BMIPS_GET_CBR();
 }
 
 static void bcm6368_quirks(void)
diff --git linux-libre-6.6-gnu/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi linux-libre-6.6.46-gnu/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index f878f47e4501..cc7747c5f21f 100644
--- linux-libre-6.6-gnu/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ linux-libre-6.6.46-gnu/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -23,14 +23,6 @@
 		};
 	};
 
-	memory@200000 {
-		compatible = "memory";
-		device_type = "memory";
-		reg = <0x00000000 0x00200000 0x00000000 0x0ee00000>, /* 238 MB at 2 MB */
-			<0x00000000 0x20000000 0x00000000 0x1f000000>, /* 496 MB at 512 MB */
-			<0x00000001 0x10000000 0x00000001 0xb0000000>; /* 6912 MB at 4352MB */
-	};
-
 	cpu_clk: cpu_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -52,6 +44,13 @@
 			0 0x40000000 0 0x40000000 0 0x40000000
 			0xfe 0x00000000 0xfe 0x00000000 0 0x40000000>;
 
+		isa@18000000 {
+			compatible = "isa";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			ranges = <1 0x0 0x0 0x18000000 0x4000>;
+		};
+
 		pm: reset-controller@1fe07000 {
 			compatible = "loongson,ls2k-pm";
 			reg = <0 0x1fe07000 0 0x422>;
@@ -100,8 +99,8 @@
 		rtc0: rtc@1fe07800 {
 			compatible = "loongson,ls2k1000-rtc";
 			reg = <0 0x1fe07800 0 0x78>;
-			interrupt-parent = <&liointc0>;
-			interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		uart0: serial@1fe00000 {
@@ -109,7 +108,7 @@
 			reg = <0 0x1fe00000 0 0x8>;
 			clock-frequency = <125000000>;
 			interrupt-parent = <&liointc0>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 			no-loopback-test;
 		};
 
@@ -118,7 +117,6 @@
 			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <2>;
 
 			reg = <0 0x1a000000 0 0x02000000>,
 				<0xfe 0x00000000 0 0x20000000>;
@@ -130,15 +128,15 @@
 				compatible = "pci0014,7a03.0",
 						   "pci0014,7a03",
 						   "pciclass0c0320",
-						   "pciclass0c03",
-						   "loongson, pci-gmac";
+						   "pciclass0c03";
 
 				reg = <0x1800 0x0 0x0 0x0 0x0>;
-				interrupts = <12 IRQ_TYPE_LEVEL_LOW>,
-					     <13 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&liointc0>;
-				phy-mode = "rgmii";
+				phy-mode = "rgmii-id";
+				phy-handle = <&phy1>;
 				mdio {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -157,11 +155,12 @@
 						   "loongson, pci-gmac";
 
 				reg = <0x1900 0x0 0x0 0x0 0x0>;
-				interrupts = <14 IRQ_TYPE_LEVEL_LOW>,
-					     <15 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&liointc0>;
-				phy-mode = "rgmii";
+				phy-mode = "rgmii-id";
+				phy-handle = <&phy1>;
 				mdio {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -179,7 +178,7 @@
 						   "pciclass0c03";
 
 				reg = <0x2100 0x0 0x0 0x0 0x0>;
-				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 			};
 
@@ -190,7 +189,7 @@
 						   "pciclass0c03";
 
 				reg = <0x2200 0x0 0x0 0x0 0x0>;
-				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 			};
 
@@ -201,97 +200,121 @@
 						   "pciclass0106";
 
 				reg = <0x4000 0x0 0x0 0x0 0x0>;
-				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc0>;
 			};
 
-			pci_bridge@9,0 {
+			pcie@9,0 {
 				compatible = "pci0014,7a19.0",
 						   "pci0014,7a19",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@a,0 {
+			pcie@a,0 {
 				compatible = "pci0014,7a09.0",
 						   "pci0014,7a09",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@b,0 {
+			pcie@b,0 {
 				compatible = "pci0014,7a09.0",
 						   "pci0014,7a09",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@c,0 {
+			pcie@c,0 {
 				compatible = "pci0014,7a09.0",
 						   "pci0014,7a09",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@d,0 {
+			pcie@d,0 {
 				compatible = "pci0014,7a19.0",
 						   "pci0014,7a19",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@e,0 {
+			pcie@e,0 {
 				compatible = "pci0014,7a09.0",
 						   "pci0014,7a09",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
 				external-facing;
 			};
 
diff --git linux-libre-6.6-gnu/arch/mips/boot/dts/loongson/ls7a-pch.dtsi linux-libre-6.6.46-gnu/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
index 7c69e8245c2f..cce9428afc41 100644
--- linux-libre-6.6-gnu/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
+++ linux-libre-6.6.46-gnu/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
@@ -193,8 +193,7 @@
 				compatible = "pci0014,7a03.0",
 						   "pci0014,7a03",
 						   "pciclass020000",
-						   "pciclass0200",
-						   "loongson, pci-gmac";
+						   "pciclass0200";
 
 				reg = <0x1800 0x0 0x0 0x0 0x0>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
diff --git linux-libre-6.6-gnu/arch/mips/include/asm/cacheflush.h linux-libre-6.6.46-gnu/arch/mips/include/asm/cacheflush.h
index f36c2519ed97..1f14132b3fc9 100644
--- linux-libre-6.6-gnu/arch/mips/include/asm/cacheflush.h
+++ linux-libre-6.6.46-gnu/arch/mips/include/asm/cacheflush.h
@@ -97,6 +97,8 @@ static inline void flush_cache_vmap(unsigned long start, unsigned long end)
 		__flush_cache_vmap();
 }
 
+#define flush_cache_vmap_early(start, end)     do { } while (0)
+
 extern void (*__flush_cache_vunmap)(void);
 
 static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
diff --git linux-libre-6.6-gnu/arch/mips/include/asm/checksum.h linux-libre-6.6.46-gnu/arch/mips/include/asm/checksum.h
index 4044eaf989ac..0921ddda11a4 100644
--- linux-libre-6.6-gnu/arch/mips/include/asm/checksum.h
+++ linux-libre-6.6.46-gnu/arch/mips/include/asm/checksum.h
@@ -241,7 +241,8 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 	"	.set	pop"
 	: "=&r" (sum), "=&r" (tmp)
 	: "r" (saddr), "r" (daddr),
-	  "0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
+	  "0" (htonl(len)), "r" (htonl(proto)), "r" (sum)
+	: "memory");
 
 	return csum_fold(sum);
 }
diff --git linux-libre-6.6-gnu/arch/mips/include/asm/dmi.h linux-libre-6.6.46-gnu/arch/mips/include/asm/dmi.h
index 27415a288adf..dc397f630c66 100644
--- linux-libre-6.6-gnu/arch/mips/include/asm/dmi.h
+++ linux-libre-6.6.46-gnu/arch/mips/include/asm/dmi.h
@@ -5,7 +5,7 @@
 #include <linux/io.h>
 #include <linux/memblock.h>
 
-#define dmi_early_remap(x, l)		ioremap_cache(x, l)
+#define dmi_early_remap(x, l)		ioremap(x, l)
 #define dmi_early_unmap(x, l)		iounmap(x)
 #define dmi_remap(x, l)			ioremap_cache(x, l)
 #define dmi_unmap(x)			iounmap(x)
diff --git linux-libre-6.6-gnu/arch/mips/include/asm/jump_label.h linux-libre-6.6.46-gnu/arch/mips/include/asm/jump_label.h
index c5c6864e64bc..405c85173f2c 100644
--- linux-libre-6.6-gnu/arch/mips/include/asm/jump_label.h
+++ linux-libre-6.6.46-gnu/arch/mips/include/asm/jump_label.h
@@ -36,7 +36,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\t" B_INSN " 2f\n\t"
+	asm goto("1:\t" B_INSN " 2f\n\t"
 		"2:\t.insn\n\t"
 		".pushsection __jump_table,  \"aw\"\n\t"
 		WORD_INSN " 1b, %l[l_yes], %0\n\t"
@@ -50,7 +50,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\t" J_INSN " %l[l_yes]\n\t"
+	asm goto("1:\t" J_INSN " %l[l_yes]\n\t"
 		".pushsection __jump_table,  \"aw\"\n\t"
 		WORD_INSN " 1b, %l[l_yes], %0\n\t"
 		".popsection\n\t"
diff --git linux-libre-6.6-gnu/arch/mips/include/asm/mach-loongson64/boot_param.h linux-libre-6.6.46-gnu/arch/mips/include/asm/mach-loongson64/boot_param.h
index 035b1a69e2d0..9218b3ae3383 100644
--- linux-libre-6.6-gnu/arch/mips/include/asm/mach-loongson64/boot_param.h
+++ linux-libre-6.6.46-gnu/arch/mips/include/asm/mach-loongson64/boot_param.h
@@ -14,7 +14,11 @@
 #define ADAPTER_ROM		8
 #define ACPI_TABLE		9
 #define SMBIOS_TABLE		10
-#define MAX_MEMORY_TYPE		11
+#define UMA_VIDEO_RAM		11
+#define VUMA_VIDEO_RAM		12
+#define MAX_MEMORY_TYPE		13
+
+#define MEM_SIZE_IS_IN_BYTES	(1 << 31)
 
 #define LOONGSON3_BOOT_MEM_MAP_MAX 128
 struct efi_memory_map_loongson {
@@ -38,12 +42,14 @@ enum loongson_cpu_type {
 	Legacy_1B = 0x5,
 	Legacy_2G = 0x6,
 	Legacy_2H = 0x7,
+	Legacy_2K = 0x8,
 	Loongson_1A = 0x100,
 	Loongson_1B = 0x101,
 	Loongson_2E = 0x200,
 	Loongson_2F = 0x201,
 	Loongson_2G = 0x202,
 	Loongson_2H = 0x203,
+	Loongson_2K = 0x204,
 	Loongson_3A = 0x300,
 	Loongson_3B = 0x301
 };
@@ -117,7 +123,8 @@ struct irq_source_routing_table {
 	u64 pci_io_start_addr;
 	u64 pci_io_end_addr;
 	u64 pci_config_addr;
-	u32 dma_mask_bits;
+	u16 dma_mask_bits;
+	u16 dma_noncoherent;
 } __packed;
 
 struct interface_info {
diff --git linux-libre-6.6-gnu/arch/mips/include/asm/mips-cm.h linux-libre-6.6.46-gnu/arch/mips/include/asm/mips-cm.h
index 23c67c0871b1..696b40beb774 100644
--- linux-libre-6.6-gnu/arch/mips/include/asm/mips-cm.h
+++ linux-libre-6.6.46-gnu/arch/mips/include/asm/mips-cm.h
@@ -228,6 +228,10 @@ GCR_ACCESSOR_RO(32, 0x0d0, gic_status)
 GCR_ACCESSOR_RO(32, 0x0f0, cpc_status)
 #define CM_GCR_CPC_STATUS_EX			BIT(0)
 
+/* GCR_ACCESS - Controls core/IOCU access to GCRs */
+GCR_ACCESSOR_RW(32, 0x120, access_cm3)
+#define CM_GCR_ACCESS_ACCESSEN			GENMASK(7, 0)
+
 /* GCR_L2_CONFIG - Indicates L2 cache configuration when Config5.L2C=1 */
 GCR_ACCESSOR_RW(32, 0x130, l2_config)
 #define CM_GCR_L2_CONFIG_BYPASS			BIT(20)
diff --git linux-libre-6.6-gnu/arch/mips/include/asm/ptrace.h linux-libre-6.6.46-gnu/arch/mips/include/asm/ptrace.h
index daf3cf244ea9..4a2b40ce39e0 100644
--- linux-libre-6.6-gnu/arch/mips/include/asm/ptrace.h
+++ linux-libre-6.6.46-gnu/arch/mips/include/asm/ptrace.h
@@ -60,6 +60,7 @@ static inline void instruction_pointer_set(struct pt_regs *regs,
                                            unsigned long val)
 {
 	regs->cp0_epc = val;
+	regs->cp0_cause &= ~CAUSEF_BD;
 }
 
 /* Query offset/name of register from its name/offset */
@@ -154,9 +155,11 @@ static inline long regs_return_value(struct pt_regs *regs)
 }
 
 #define instruction_pointer(regs) ((regs)->cp0_epc)
+extern unsigned long exception_ip(struct pt_regs *regs);
+#define exception_ip(regs) exception_ip(regs)
 #define profile_pc(regs) instruction_pointer(regs)
 
-extern asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall);
+extern asmlinkage long syscall_trace_enter(struct pt_regs *regs);
 extern asmlinkage void syscall_trace_leave(struct pt_regs *regs);
 
 extern void die(const char *, struct pt_regs *) __noreturn;
diff --git linux-libre-6.6-gnu/arch/mips/kernel/asm-offsets.c linux-libre-6.6.46-gnu/arch/mips/kernel/asm-offsets.c
index d1b11f66f748..cb1045ebab06 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/asm-offsets.c
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/asm-offsets.c
@@ -101,6 +101,7 @@ void output_thread_info_defines(void)
 	OFFSET(TI_CPU, thread_info, cpu);
 	OFFSET(TI_PRE_COUNT, thread_info, preempt_count);
 	OFFSET(TI_REGS, thread_info, regs);
+	OFFSET(TI_SYSCALL, thread_info, syscall);
 	DEFINE(_THREAD_SIZE, THREAD_SIZE);
 	DEFINE(_THREAD_MASK, THREAD_MASK);
 	DEFINE(_IRQ_STACK_SIZE, IRQ_STACK_SIZE);
diff --git linux-libre-6.6-gnu/arch/mips/kernel/elf.c linux-libre-6.6.46-gnu/arch/mips/kernel/elf.c
index 5582a4ca1e9e..7aa2c2360ff6 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/elf.c
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/elf.c
@@ -11,6 +11,7 @@
 
 #include <asm/cpu-features.h>
 #include <asm/cpu-info.h>
+#include <asm/fpu.h>
 
 #ifdef CONFIG_MIPS_FP_SUPPORT
 
@@ -309,6 +310,11 @@ void mips_set_personality_nan(struct arch_elf_state *state)
 	struct cpuinfo_mips *c = &boot_cpu_data;
 	struct task_struct *t = current;
 
+	/* Do this early so t->thread.fpu.fcr31 won't be clobbered in case
+	 * we are preempted before the lose_fpu(0) in start_thread.
+	 */
+	lose_fpu(0);
+
 	t->thread.fpu.fcr31 = c->fpu_csr31;
 	switch (state->nan_2008) {
 	case 0:
diff --git linux-libre-6.6-gnu/arch/mips/kernel/process.c linux-libre-6.6.46-gnu/arch/mips/kernel/process.c
index 5387ed0a5186..b630604c577f 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/process.c
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/process.c
@@ -121,6 +121,19 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 	/*  Put the stack after the struct pt_regs.  */
 	childksp = (unsigned long) childregs;
 	p->thread.cp0_status = (read_c0_status() & ~(ST0_CU2|ST0_CU1)) | ST0_KERNEL_CUMASK;
+
+	/*
+	 * New tasks lose permission to use the fpu. This accelerates context
+	 * switching for most programs since they don't use the fpu.
+	 */
+	clear_tsk_thread_flag(p, TIF_USEDFPU);
+	clear_tsk_thread_flag(p, TIF_USEDMSA);
+	clear_tsk_thread_flag(p, TIF_MSA_CTX_LIVE);
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+	clear_tsk_thread_flag(p, TIF_FPUBOUND);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
 	if (unlikely(args->fn)) {
 		/* kernel thread */
 		unsigned long status = p->thread.cp0_status;
@@ -149,20 +162,8 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 	p->thread.reg29 = (unsigned long) childregs;
 	p->thread.reg31 = (unsigned long) ret_from_fork;
 
-	/*
-	 * New tasks lose permission to use the fpu. This accelerates context
-	 * switching for most programs since they don't use the fpu.
-	 */
 	childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
 
-	clear_tsk_thread_flag(p, TIF_USEDFPU);
-	clear_tsk_thread_flag(p, TIF_USEDMSA);
-	clear_tsk_thread_flag(p, TIF_MSA_CTX_LIVE);
-
-#ifdef CONFIG_MIPS_MT_FPAFF
-	clear_tsk_thread_flag(p, TIF_FPUBOUND);
-#endif /* CONFIG_MIPS_MT_FPAFF */
-
 #ifdef CONFIG_MIPS_FP_SUPPORT
 	atomic_set(&p->thread.bd_emu_frame, BD_EMUFRAME_NONE);
 #endif
diff --git linux-libre-6.6-gnu/arch/mips/kernel/ptrace.c linux-libre-6.6.46-gnu/arch/mips/kernel/ptrace.c
index d9df543f7e2c..61503a36067e 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/ptrace.c
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/ptrace.c
@@ -31,6 +31,7 @@
 #include <linux/seccomp.h>
 #include <linux/ftrace.h>
 
+#include <asm/branch.h>
 #include <asm/byteorder.h>
 #include <asm/cpu.h>
 #include <asm/cpu-info.h>
@@ -48,6 +49,12 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/syscalls.h>
 
+unsigned long exception_ip(struct pt_regs *regs)
+{
+	return exception_epc(regs);
+}
+EXPORT_SYMBOL(exception_ip);
+
 /*
  * Called by kernel/ptrace.c when detaching..
  *
@@ -1310,16 +1317,13 @@ long arch_ptrace(struct task_struct *child, long request,
  * Notification of system call entry/exit
  * - triggered by current->work.syscall_trace
  */
-asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
+asmlinkage long syscall_trace_enter(struct pt_regs *regs)
 {
 	user_exit();
 
-	current_thread_info()->syscall = syscall;
-
 	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
 		if (ptrace_report_syscall_entry(regs))
 			return -1;
-		syscall = current_thread_info()->syscall;
 	}
 
 #ifdef CONFIG_SECCOMP
@@ -1328,7 +1332,7 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
 		struct seccomp_data sd;
 		unsigned long args[6];
 
-		sd.nr = syscall;
+		sd.nr = current_thread_info()->syscall;
 		sd.arch = syscall_get_arch(current);
 		syscall_get_arguments(current, regs, args);
 		for (i = 0; i < 6; i++)
@@ -1338,23 +1342,23 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
 		ret = __secure_computing(&sd);
 		if (ret == -1)
 			return ret;
-		syscall = current_thread_info()->syscall;
 	}
 #endif
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
 		trace_sys_enter(regs, regs->regs[2]);
 
-	audit_syscall_entry(syscall, regs->regs[4], regs->regs[5],
+	audit_syscall_entry(current_thread_info()->syscall,
+			    regs->regs[4], regs->regs[5],
 			    regs->regs[6], regs->regs[7]);
 
 	/*
 	 * Negative syscall numbers are mistaken for rejected syscalls, but
 	 * won't have had the return value set appropriately, so we do so now.
 	 */
-	if (syscall < 0)
+	if (current_thread_info()->syscall < 0)
 		syscall_set_return_value(current, regs, -ENOSYS, 0);
-	return syscall;
+	return current_thread_info()->syscall;
 }
 
 /*
diff --git linux-libre-6.6-gnu/arch/mips/kernel/scall32-o32.S linux-libre-6.6.46-gnu/arch/mips/kernel/scall32-o32.S
index 18dc9b345056..2c604717e630 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/scall32-o32.S
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/scall32-o32.S
@@ -77,6 +77,18 @@ loads_done:
 	PTR_WD	load_a7, bad_stack_a7
 	.previous
 
+	/*
+	 * syscall number is in v0 unless we called syscall(__NR_###)
+	 * where the real syscall number is in a0
+	 */
+	subu	t2, v0,  __NR_O32_Linux
+	bnez	t2, 1f /* __NR_syscall at offset 0 */
+	LONG_S	a0, TI_SYSCALL($28)	# Save a0 as syscall number
+	b	2f
+1:
+	LONG_S	v0, TI_SYSCALL($28)	# Save v0 as syscall number
+2:
+
 	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	and	t0, t1
@@ -114,16 +126,7 @@ syscall_trace_entry:
 	SAVE_STATIC
 	move	a0, sp
 
-	/*
-	 * syscall number is in v0 unless we called syscall(__NR_###)
-	 * where the real syscall number is in a0
-	 */
-	move	a1, v0
-	subu	t2, v0,  __NR_O32_Linux
-	bnez	t2, 1f /* __NR_syscall at offset 0 */
-	lw	a1, PT_R4(sp)
-
-1:	jal	syscall_trace_enter
+	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
 
diff --git linux-libre-6.6-gnu/arch/mips/kernel/scall64-n32.S linux-libre-6.6.46-gnu/arch/mips/kernel/scall64-n32.S
index 97456b2ca7dc..97788859238c 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/scall64-n32.S
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/scall64-n32.S
@@ -44,6 +44,8 @@ NESTED(handle_sysn32, PT_SIZE, sp)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
+	LONG_S	v0, TI_SYSCALL($28)     # Store syscall number
+
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
@@ -72,7 +74,6 @@ syscall_common:
 n32_syscall_trace_entry:
 	SAVE_STATIC
 	move	a0, sp
-	move	a1, v0
 	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
diff --git linux-libre-6.6-gnu/arch/mips/kernel/scall64-n64.S linux-libre-6.6.46-gnu/arch/mips/kernel/scall64-n64.S
index e6264aa62e45..be11ea5cc67e 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/scall64-n64.S
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/scall64-n64.S
@@ -46,6 +46,8 @@ NESTED(handle_sys64, PT_SIZE, sp)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
+	LONG_S	v0, TI_SYSCALL($28)     # Store syscall number
+
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
@@ -82,7 +84,6 @@ n64_syscall_exit:
 syscall_trace_entry:
 	SAVE_STATIC
 	move	a0, sp
-	move	a1, v0
 	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
diff --git linux-libre-6.6-gnu/arch/mips/kernel/scall64-o32.S linux-libre-6.6.46-gnu/arch/mips/kernel/scall64-o32.S
index d3c2616cba22..7a5abb73e531 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/scall64-o32.S
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/scall64-o32.S
@@ -79,6 +79,22 @@ loads_done:
 	PTR_WD	load_a7, bad_stack_a7
 	.previous
 
+	/*
+	 * absolute syscall number is in v0 unless we called syscall(__NR_###)
+	 * where the real syscall number is in a0
+	 * note: NR_syscall is the first O32 syscall but the macro is
+	 * only defined when compiling with -mabi=32 (CONFIG_32BIT)
+	 * therefore __NR_O32_Linux is used (4000)
+	 */
+
+	subu	t2, v0,  __NR_O32_Linux
+	bnez	t2, 1f /* __NR_syscall at offset 0 */
+	LONG_S	a0, TI_SYSCALL($28)	# Save a0 as syscall number
+	b	2f
+1:
+	LONG_S	v0, TI_SYSCALL($28)	# Save v0 as syscall number
+2:
+
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
@@ -113,22 +129,7 @@ trace_a_syscall:
 	sd	a7, PT_R11(sp)		# For indirect syscalls
 
 	move	a0, sp
-	/*
-	 * absolute syscall number is in v0 unless we called syscall(__NR_###)
-	 * where the real syscall number is in a0
-	 * note: NR_syscall is the first O32 syscall but the macro is
-	 * only defined when compiling with -mabi=32 (CONFIG_32BIT)
-	 * therefore __NR_O32_Linux is used (4000)
-	 */
-	.set	push
-	.set	reorder
-	subu	t1, v0,  __NR_O32_Linux
-	move	a1, v0
-	bnez	t1, 1f /* __NR_syscall at offset 0 */
-	ld	a1, PT_R4(sp) /* Arg1 for __NR_syscall case */
-	.set	pop
-
-1:	jal	syscall_trace_enter
+	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
 
diff --git linux-libre-6.6-gnu/arch/mips/kernel/setup.c linux-libre-6.6.46-gnu/arch/mips/kernel/setup.c
index cb871eb784a7..3f45b72561db 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/setup.c
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/setup.c
@@ -54,7 +54,7 @@ struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
 
 EXPORT_SYMBOL(cpu_data);
 
-#ifdef CONFIG_VT
+#ifdef CONFIG_VGA_CONSOLE
 struct screen_info screen_info;
 #endif
 
@@ -326,11 +326,11 @@ static void __init bootmem_init(void)
 		panic("Incorrect memory mapping !!!");
 
 	if (max_pfn > PFN_DOWN(HIGHMEM_START)) {
+		max_low_pfn = PFN_DOWN(HIGHMEM_START);
 #ifdef CONFIG_HIGHMEM
-		highstart_pfn = PFN_DOWN(HIGHMEM_START);
+		highstart_pfn = max_low_pfn;
 		highend_pfn = max_pfn;
 #else
-		max_low_pfn = PFN_DOWN(HIGHMEM_START);
 		max_pfn = max_low_pfn;
 #endif
 	}
diff --git linux-libre-6.6-gnu/arch/mips/kernel/smp-cps.c linux-libre-6.6.46-gnu/arch/mips/kernel/smp-cps.c
index dd55d59b88db..d445f8e849ab 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/smp-cps.c
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/smp-cps.c
@@ -222,7 +222,10 @@ static void boot_core(unsigned int core, unsigned int vpe_id)
 	write_gcr_co_reset_ext_base(CM_GCR_Cx_RESET_EXT_BASE_UEB);
 
 	/* Ensure the core can access the GCRs */
-	set_gcr_access(1 << core);
+	if (mips_cm_revision() < CM_REV_CM3)
+		set_gcr_access(1 << core);
+	else
+		set_gcr_access_cm3(1 << core);
 
 	if (mips_cpc_present()) {
 		/* Reset the core */
diff --git linux-libre-6.6-gnu/arch/mips/kernel/smp.c linux-libre-6.6.46-gnu/arch/mips/kernel/smp.c
index 8fbef537fb88..81f6c4f8fbc1 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/smp.c
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/smp.c
@@ -351,10 +351,11 @@ early_initcall(mips_smp_ipi_init);
  */
 asmlinkage void start_secondary(void)
 {
-	unsigned int cpu;
+	unsigned int cpu = raw_smp_processor_id();
 
 	cpu_probe();
 	per_cpu_trap_init(false);
+	rcu_cpu_starting(cpu);
 	mips_clockevent_init();
 	mp_ops->init_secondary();
 	cpu_report();
@@ -366,7 +367,6 @@ asmlinkage void start_secondary(void)
 	 */
 
 	calibrate_delay();
-	cpu = smp_processor_id();
 	cpu_data[cpu].udelay_val = loops_per_jiffy;
 
 	set_cpu_sibling_map(cpu);
diff --git linux-libre-6.6-gnu/arch/mips/kernel/syscalls/syscall_n32.tbl linux-libre-6.6.46-gnu/arch/mips/kernel/syscalls/syscall_n32.tbl
index 152034b8e0a0..4a296124604a 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/syscalls/syscall_n32.tbl
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/syscalls/syscall_n32.tbl
@@ -354,7 +354,7 @@
 412	n32	utimensat_time64		sys_utimensat
 413	n32	pselect6_time64			compat_sys_pselect6_time64
 414	n32	ppoll_time64			compat_sys_ppoll_time64
-416	n32	io_pgetevents_time64		sys_io_pgetevents
+416	n32	io_pgetevents_time64		compat_sys_io_pgetevents_time64
 417	n32	recvmmsg_time64			compat_sys_recvmmsg_time64
 418	n32	mq_timedsend_time64		sys_mq_timedsend
 419	n32	mq_timedreceive_time64		sys_mq_timedreceive
diff --git linux-libre-6.6-gnu/arch/mips/kernel/syscalls/syscall_o32.tbl linux-libre-6.6.46-gnu/arch/mips/kernel/syscalls/syscall_o32.tbl
index 1a646813afdc..1ee62a861380 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/syscalls/syscall_o32.tbl
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/syscalls/syscall_o32.tbl
@@ -27,7 +27,7 @@
 17	o32	break				sys_ni_syscall
 # 18 was sys_stat
 18	o32	unused18			sys_ni_syscall
-19	o32	lseek				sys_lseek
+19	o32	lseek				sys_lseek			compat_sys_lseek
 20	o32	getpid				sys_getpid
 21	o32	mount				sys_mount
 22	o32	umount				sys_oldumount
@@ -403,7 +403,7 @@
 412	o32	utimensat_time64		sys_utimensat			sys_utimensat
 413	o32	pselect6_time64			sys_pselect6			compat_sys_pselect6_time64
 414	o32	ppoll_time64			sys_ppoll			compat_sys_ppoll_time64
-416	o32	io_pgetevents_time64		sys_io_pgetevents		sys_io_pgetevents
+416	o32	io_pgetevents_time64		sys_io_pgetevents		compat_sys_io_pgetevents_time64
 417	o32	recvmmsg_time64			sys_recvmmsg			compat_sys_recvmmsg_time64
 418	o32	mq_timedsend_time64		sys_mq_timedsend		sys_mq_timedsend
 419	o32	mq_timedreceive_time64		sys_mq_timedreceive		sys_mq_timedreceive
diff --git linux-libre-6.6-gnu/arch/mips/kernel/traps.c linux-libre-6.6.46-gnu/arch/mips/kernel/traps.c
index 246c6a6b0261..5b778995d448 100644
--- linux-libre-6.6-gnu/arch/mips/kernel/traps.c
+++ linux-libre-6.6.46-gnu/arch/mips/kernel/traps.c
@@ -2007,7 +2007,13 @@ unsigned long vi_handlers[64];
 
 void reserve_exception_space(phys_addr_t addr, unsigned long size)
 {
-	memblock_reserve(addr, size);
+	/*
+	 * reserve exception space on CPUs other than CPU0
+	 * is too late, since memblock is unavailable when APs
+	 * up
+	 */
+	if (smp_processor_id() == 0)
+		memblock_reserve(addr, size);
 }
 
 void __init *set_except_vector(int n, void *addr)
diff --git linux-libre-6.6-gnu/arch/mips/lantiq/prom.c linux-libre-6.6.46-gnu/arch/mips/lantiq/prom.c
index a3cf29365858..0c45767eacf6 100644
--- linux-libre-6.6-gnu/arch/mips/lantiq/prom.c
+++ linux-libre-6.6.46-gnu/arch/mips/lantiq/prom.c
@@ -108,10 +108,9 @@ void __init prom_init(void)
 	prom_init_cmdline();
 
 #if defined(CONFIG_MIPS_MT_SMP)
-	if (cpu_has_mipsmt) {
-		lantiq_smp_ops = vsmp_smp_ops;
+	lantiq_smp_ops = vsmp_smp_ops;
+	if (cpu_has_mipsmt)
 		lantiq_smp_ops.init_secondary = lantiq_init_secondary;
-		register_smp_ops(&lantiq_smp_ops);
-	}
+	register_smp_ops(&lantiq_smp_ops);
 #endif
 }
diff --git linux-libre-6.6-gnu/arch/mips/loongson64/env.c linux-libre-6.6.46-gnu/arch/mips/loongson64/env.c
index c961e2999f15..09ff05269861 100644
--- linux-libre-6.6-gnu/arch/mips/loongson64/env.c
+++ linux-libre-6.6.46-gnu/arch/mips/loongson64/env.c
@@ -13,6 +13,8 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  */
+
+#include <linux/dma-map-ops.h>
 #include <linux/export.h>
 #include <linux/pci_ids.h>
 #include <asm/bootinfo.h>
@@ -86,6 +88,12 @@ void __init prom_lefi_init_env(void)
 	cpu_clock_freq = ecpu->cpu_clock_freq;
 	loongson_sysconf.cputype = ecpu->cputype;
 	switch (ecpu->cputype) {
+	case Legacy_2K:
+	case Loongson_2K:
+		smp_group[0] = 0x900000001fe11000;
+		loongson_sysconf.cores_per_node = 2;
+		loongson_sysconf.cores_per_package = 2;
+		break;
 	case Legacy_3A:
 	case Loongson_3A:
 		loongson_sysconf.cores_per_node = 4;
@@ -147,8 +155,14 @@ void __init prom_lefi_init_env(void)
 
 	loongson_sysconf.dma_mask_bits = eirq_source->dma_mask_bits;
 	if (loongson_sysconf.dma_mask_bits < 32 ||
-		loongson_sysconf.dma_mask_bits > 64)
+			loongson_sysconf.dma_mask_bits > 64) {
 		loongson_sysconf.dma_mask_bits = 32;
+		dma_default_coherent = true;
+	} else {
+		dma_default_coherent = !eirq_source->dma_noncoherent;
+	}
+
+	pr_info("Firmware: Coherent DMA: %s\n", dma_default_coherent ? "on" : "off");
 
 	loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm;
 	loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown;
@@ -213,6 +227,8 @@ void __init prom_lefi_init_env(void)
 		default:
 			break;
 		}
+	} else if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) {
+		loongson_fdt_blob = __dtb_loongson64_2core_2k1000_begin;
 	} else if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64G) {
 		if (loongson_sysconf.bridgetype == LS7A)
 			loongson_fdt_blob = __dtb_loongson64g_4core_ls7a_begin;
diff --git linux-libre-6.6-gnu/arch/mips/loongson64/init.c linux-libre-6.6.46-gnu/arch/mips/loongson64/init.c
index ee8de1735b7c..f25caa6aa9d3 100644
--- linux-libre-6.6-gnu/arch/mips/loongson64/init.c
+++ linux-libre-6.6.46-gnu/arch/mips/loongson64/init.c
@@ -49,8 +49,7 @@ void virtual_early_config(void)
 void __init szmem(unsigned int node)
 {
 	u32 i, mem_type;
-	static unsigned long num_physpages;
-	u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
+	phys_addr_t node_id, mem_start, mem_size;
 
 	/* Otherwise come from DTB */
 	if (loongson_sysconf.fw_interface != LOONGSON_LEFI)
@@ -64,30 +63,46 @@ void __init szmem(unsigned int node)
 
 		mem_type = loongson_memmap->map[i].mem_type;
 		mem_size = loongson_memmap->map[i].mem_size;
-		mem_start = loongson_memmap->map[i].mem_start;
+
+		/* Memory size comes in MB if MEM_SIZE_IS_IN_BYTES not set */
+		if (mem_size & MEM_SIZE_IS_IN_BYTES)
+			mem_size &= ~MEM_SIZE_IS_IN_BYTES;
+		else
+			mem_size = mem_size << 20;
+
+		mem_start = (node_id << 44) | loongson_memmap->map[i].mem_start;
 
 		switch (mem_type) {
 		case SYSTEM_RAM_LOW:
 		case SYSTEM_RAM_HIGH:
-			start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
-			node_psize = (mem_size << 20) >> PAGE_SHIFT;
-			end_pfn  = start_pfn + node_psize;
-			num_physpages += node_psize;
-			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
-				(u32)node_id, mem_type, mem_start, mem_size);
-			pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
-				start_pfn, end_pfn, num_physpages);
-			memblock_add_node(PFN_PHYS(start_pfn),
-					  PFN_PHYS(node_psize), node,
+		case UMA_VIDEO_RAM:
+			pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes usable\n",
+				(u32)node_id, mem_type, &mem_start, &mem_size);
+			memblock_add_node(mem_start, mem_size, node,
 					  MEMBLOCK_NONE);
 			break;
 		case SYSTEM_RAM_RESERVED:
-			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
-				(u32)node_id, mem_type, mem_start, mem_size);
-			memblock_reserve(((node_id << 44) + mem_start), mem_size << 20);
+		case VIDEO_ROM:
+		case ADAPTER_ROM:
+		case ACPI_TABLE:
+		case SMBIOS_TABLE:
+			pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes reserved\n",
+				(u32)node_id, mem_type, &mem_start, &mem_size);
+			memblock_reserve(mem_start, mem_size);
+			break;
+		/* We should not reserve VUMA_VIDEO_RAM as it overlaps with MMIO */
+		case VUMA_VIDEO_RAM:
+		default:
+			pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes unhandled\n",
+				(u32)node_id, mem_type, &mem_start, &mem_size);
 			break;
 		}
 	}
+
+	/* Reserve vgabios if it comes from firmware */
+	if (loongson_sysconf.vgabios_addr)
+		memblock_reserve(virt_to_phys((void *)loongson_sysconf.vgabios_addr),
+				SZ_256K);
 }
 
 #ifndef CONFIG_NUMA
diff --git linux-libre-6.6-gnu/arch/mips/loongson64/reset.c linux-libre-6.6.46-gnu/arch/mips/loongson64/reset.c
index e420800043b0..2a8e4cd72605 100644
--- linux-libre-6.6-gnu/arch/mips/loongson64/reset.c
+++ linux-libre-6.6.46-gnu/arch/mips/loongson64/reset.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/kexec.h>
 #include <linux/pm.h>
+#include <linux/reboot.h>
 #include <linux/slab.h>
 
 #include <asm/bootinfo.h>
@@ -21,36 +22,21 @@
 #include <loongson.h>
 #include <boot_param.h>
 
-static void loongson_restart(char *command)
+static int firmware_restart(struct sys_off_data *unusedd)
 {
 
 	void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr;
 
 	fw_restart();
-	while (1) {
-		if (cpu_wait)
-			cpu_wait();
-	}
+	return NOTIFY_DONE;
 }
 
-static void loongson_poweroff(void)
+static int firmware_poweroff(struct sys_off_data *unused)
 {
 	void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
 
 	fw_poweroff();
-	while (1) {
-		if (cpu_wait)
-			cpu_wait();
-	}
-}
-
-static void loongson_halt(void)
-{
-	pr_notice("\n\n** You can safely turn off the power now **\n\n");
-	while (1) {
-		if (cpu_wait)
-			cpu_wait();
-	}
+	return NOTIFY_DONE;
 }
 
 #ifdef CONFIG_KEXEC
@@ -154,9 +140,17 @@ static void loongson_crash_shutdown(struct pt_regs *regs)
 
 static int __init mips_reboot_setup(void)
 {
-	_machine_restart = loongson_restart;
-	_machine_halt = loongson_halt;
-	pm_power_off = loongson_poweroff;
+	if (loongson_sysconf.restart_addr) {
+		register_sys_off_handler(SYS_OFF_MODE_RESTART,
+				 SYS_OFF_PRIO_FIRMWARE,
+				 firmware_restart, NULL);
+	}
+
+	if (loongson_sysconf.poweroff_addr) {
+		register_sys_off_handler(SYS_OFF_MODE_POWER_OFF,
+				 SYS_OFF_PRIO_FIRMWARE,
+				 firmware_poweroff, NULL);
+	}
 
 #ifdef CONFIG_KEXEC
 	kexec_argv = kmalloc(KEXEC_ARGV_SIZE, GFP_KERNEL);
diff --git linux-libre-6.6-gnu/arch/mips/loongson64/smp.c linux-libre-6.6.46-gnu/arch/mips/loongson64/smp.c
index e015a26a40f7..979993679d91 100644
--- linux-libre-6.6-gnu/arch/mips/loongson64/smp.c
+++ linux-libre-6.6.46-gnu/arch/mips/loongson64/smp.c
@@ -466,12 +466,25 @@ static void loongson3_smp_finish(void)
 static void __init loongson3_smp_setup(void)
 {
 	int i = 0, num = 0; /* i: physical id, num: logical id */
+	int max_cpus = 0;
 
 	init_cpu_possible(cpu_none_mask);
 
+	for (i = 0; i < ARRAY_SIZE(smp_group); i++) {
+		if (!smp_group[i])
+			break;
+		max_cpus += loongson_sysconf.cores_per_node;
+	}
+
+	if (max_cpus < loongson_sysconf.nr_cpus) {
+		pr_err("SMP Groups are less than the number of CPUs\n");
+		loongson_sysconf.nr_cpus = max_cpus ? max_cpus : 1;
+	}
+
 	/* For unified kernel, NR_CPUS is the maximum possible value,
 	 * loongson_sysconf.nr_cpus is the really present value
 	 */
+	i = 0;
 	while (i < loongson_sysconf.nr_cpus) {
 		if (loongson_sysconf.reserved_cpus_mask & (1<<i)) {
 			/* Reserved physical CPU cores */
@@ -492,14 +505,14 @@ static void __init loongson3_smp_setup(void)
 		__cpu_logical_map[num] = -1;
 		num++;
 	}
-
 	csr_ipi_probe();
 	ipi_set0_regs_init();
 	ipi_clear0_regs_init();
 	ipi_status0_regs_init();
 	ipi_en0_regs_init();
 	ipi_mailbox_buf_init();
-	ipi_write_enable(0);
+	if (smp_group[0])
+		ipi_write_enable(0);
 
 	cpu_set_core(&cpu_data[0],
 		     cpu_logical_map(0) % loongson_sysconf.cores_per_package);
@@ -818,6 +831,9 @@ static int loongson3_disable_clock(unsigned int cpu)
 	uint64_t core_id = cpu_core(&cpu_data[cpu]);
 	uint64_t package_id = cpu_data[cpu].package;
 
+	if (!loongson_chipcfg[package_id] || !loongson_freqctrl[package_id])
+		return 0;
+
 	if ((read_c0_prid() & PRID_REV_MASK) == PRID_REV_LOONGSON3A_R1) {
 		LOONGSON_CHIPCFG(package_id) &= ~(1 << (12 + core_id));
 	} else {
@@ -832,6 +848,9 @@ static int loongson3_enable_clock(unsigned int cpu)
 	uint64_t core_id = cpu_core(&cpu_data[cpu]);
 	uint64_t package_id = cpu_data[cpu].package;
 
+	if (!loongson_chipcfg[package_id] || !loongson_freqctrl[package_id])
+		return 0;
+
 	if ((read_c0_prid() & PRID_REV_MASK) == PRID_REV_LOONGSON3A_R1) {
 		LOONGSON_CHIPCFG(package_id) |= 1 << (12 + core_id);
 	} else {
diff --git linux-libre-6.6-gnu/arch/mips/mm/cache.c linux-libre-6.6.46-gnu/arch/mips/mm/cache.c
index 02042100e267..7f830634dbe7 100644
--- linux-libre-6.6-gnu/arch/mips/mm/cache.c
+++ linux-libre-6.6.46-gnu/arch/mips/mm/cache.c
@@ -117,7 +117,7 @@ void __flush_dcache_pages(struct page *page, unsigned int nr)
 	 * get faulted into the tlb (and thus flushed) anyways.
 	 */
 	for (i = 0; i < nr; i++) {
-		addr = (unsigned long)kmap_local_page(page + i);
+		addr = (unsigned long)kmap_local_page(nth_page(page, i));
 		flush_data_cache_page(addr);
 		kunmap_local((void *)addr);
 	}
diff --git linux-libre-6.6-gnu/arch/mips/mm/init.c linux-libre-6.6.46-gnu/arch/mips/mm/init.c
index 5dcb525a8995..6e368a4658b5 100644
--- linux-libre-6.6-gnu/arch/mips/mm/init.c
+++ linux-libre-6.6.46-gnu/arch/mips/mm/init.c
@@ -422,7 +422,12 @@ void __init paging_init(void)
 		       (highend_pfn - max_low_pfn) << (PAGE_SHIFT - 10));
 		max_zone_pfns[ZONE_HIGHMEM] = max_low_pfn;
 	}
+
+	max_mapnr = highend_pfn ? highend_pfn : max_low_pfn;
+#else
+	max_mapnr = max_low_pfn;
 #endif
+	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
 
 	free_area_init(max_zone_pfns);
 }
@@ -458,13 +463,6 @@ void __init mem_init(void)
 	 */
 	BUILD_BUG_ON(IS_ENABLED(CONFIG_32BIT) && (PFN_PTE_SHIFT > PAGE_SHIFT));
 
-#ifdef CONFIG_HIGHMEM
-	max_mapnr = highend_pfn ? highend_pfn : max_low_pfn;
-#else
-	max_mapnr = max_low_pfn;
-#endif
-	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
-
 	maar_init();
 	memblock_free_all();
 	setup_zero_pages();	/* Setup zeroed pages.  */
diff --git linux-libre-6.6-gnu/arch/mips/pci/ops-rc32434.c linux-libre-6.6.46-gnu/arch/mips/pci/ops-rc32434.c
index 874ed6df9768..34b9323bdabb 100644
--- linux-libre-6.6-gnu/arch/mips/pci/ops-rc32434.c
+++ linux-libre-6.6.46-gnu/arch/mips/pci/ops-rc32434.c
@@ -112,8 +112,8 @@ retry:
 	 * gives them time to settle
 	 */
 	if (where == PCI_VENDOR_ID) {
-		if (ret == 0xffffffff || ret == 0x00000000 ||
-		    ret == 0x0000ffff || ret == 0xffff0000) {
+		if (*val == 0xffffffff || *val == 0x00000000 ||
+		    *val == 0x0000ffff || *val == 0xffff0000) {
 			if (delay > 4)
 				return 0;
 			delay *= 2;
diff --git linux-libre-6.6-gnu/arch/mips/pci/pcie-octeon.c linux-libre-6.6.46-gnu/arch/mips/pci/pcie-octeon.c
index c9edd3fb380d..9eaacd3d3388 100644
--- linux-libre-6.6-gnu/arch/mips/pci/pcie-octeon.c
+++ linux-libre-6.6.46-gnu/arch/mips/pci/pcie-octeon.c
@@ -230,12 +230,18 @@ static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus,
 {
 	union cvmx_pcie_address pcie_addr;
 	union cvmx_pciercx_cfg006 pciercx_cfg006;
+	union cvmx_pciercx_cfg032 pciercx_cfg032;
 
 	pciercx_cfg006.u32 =
 	    cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port));
 	if ((bus <= pciercx_cfg006.s.pbnum) && (dev != 0))
 		return 0;
 
+	pciercx_cfg032.u32 =
+		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port));
+	if ((pciercx_cfg032.s.dlla == 0) || (pciercx_cfg032.s.lt == 1))
+		return 0;
+
 	pcie_addr.u64 = 0;
 	pcie_addr.config.upper = 2;
 	pcie_addr.config.io = 1;
diff --git linux-libre-6.6-gnu/arch/mips/sgi-ip30/ip30-console.c linux-libre-6.6.46-gnu/arch/mips/sgi-ip30/ip30-console.c
index b91f8c4fdc78..a087b7ebe129 100644
--- linux-libre-6.6-gnu/arch/mips/sgi-ip30/ip30-console.c
+++ linux-libre-6.6.46-gnu/arch/mips/sgi-ip30/ip30-console.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 
 #include <linux/io.h>
+#include <linux/processor.h>
 
 #include <asm/sn/ioc3.h>
 
diff --git linux-libre-6.6-gnu/arch/mips/sibyte/swarm/setup.c linux-libre-6.6.46-gnu/arch/mips/sibyte/swarm/setup.c
index 76683993cdd3..37df504d3ecb 100644
--- linux-libre-6.6-gnu/arch/mips/sibyte/swarm/setup.c
+++ linux-libre-6.6.46-gnu/arch/mips/sibyte/swarm/setup.c
@@ -129,7 +129,7 @@ void __init plat_mem_setup(void)
 	if (m41t81_probe())
 		swarm_rtc_type = RTC_M41T81;
 
-#ifdef CONFIG_VT
+#ifdef CONFIG_VGA_CONSOLE
 	screen_info = (struct screen_info) {
 		.orig_video_page	= 52,
 		.orig_video_mode	= 3,
diff --git linux-libre-6.6-gnu/arch/mips/sni/setup.c linux-libre-6.6.46-gnu/arch/mips/sni/setup.c
index efad85c8c823..9984cf91be7d 100644
--- linux-libre-6.6-gnu/arch/mips/sni/setup.c
+++ linux-libre-6.6.46-gnu/arch/mips/sni/setup.c
@@ -38,7 +38,7 @@ extern void sni_machine_power_off(void);
 
 static void __init sni_display_setup(void)
 {
-#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_FW_ARC)
+#if defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_FW_ARC)
 	struct screen_info *si = &screen_info;
 	DISPLAY_STATUS *di;
 
diff --git linux-libre-6.6-gnu/arch/nios2/include/asm/cacheflush.h linux-libre-6.6.46-gnu/arch/nios2/include/asm/cacheflush.h
index 348cea097792..81484a776b33 100644
--- linux-libre-6.6-gnu/arch/nios2/include/asm/cacheflush.h
+++ linux-libre-6.6.46-gnu/arch/nios2/include/asm/cacheflush.h
@@ -38,6 +38,7 @@ void flush_icache_pages(struct vm_area_struct *vma, struct page *page,
 #define flush_icache_pages flush_icache_pages
 
 #define flush_cache_vmap(start, end)		flush_dcache_range(start, end)
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_dcache_range(start, end)
 
 extern void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
diff --git linux-libre-6.6-gnu/arch/openrisc/kernel/traps.c linux-libre-6.6.46-gnu/arch/openrisc/kernel/traps.c
index 9370888c9a7e..90554a5558fb 100644
--- linux-libre-6.6-gnu/arch/openrisc/kernel/traps.c
+++ linux-libre-6.6.46-gnu/arch/openrisc/kernel/traps.c
@@ -180,29 +180,39 @@ asmlinkage void unhandled_exception(struct pt_regs *regs, int ea, int vector)
 
 asmlinkage void do_fpe_trap(struct pt_regs *regs, unsigned long address)
 {
-	int code = FPE_FLTUNK;
-	unsigned long fpcsr = regs->fpcsr;
-
-	if (fpcsr & SPR_FPCSR_IVF)
-		code = FPE_FLTINV;
-	else if (fpcsr & SPR_FPCSR_OVF)
-		code = FPE_FLTOVF;
-	else if (fpcsr & SPR_FPCSR_UNF)
-		code = FPE_FLTUND;
-	else if (fpcsr & SPR_FPCSR_DZF)
-		code = FPE_FLTDIV;
-	else if (fpcsr & SPR_FPCSR_IXF)
-		code = FPE_FLTRES;
-
-	/* Clear all flags */
-	regs->fpcsr &= ~SPR_FPCSR_ALLF;
-
-	force_sig_fault(SIGFPE, code, (void __user *)regs->pc);
+	if (user_mode(regs)) {
+		int code = FPE_FLTUNK;
+		unsigned long fpcsr = regs->fpcsr;
+
+		if (fpcsr & SPR_FPCSR_IVF)
+			code = FPE_FLTINV;
+		else if (fpcsr & SPR_FPCSR_OVF)
+			code = FPE_FLTOVF;
+		else if (fpcsr & SPR_FPCSR_UNF)
+			code = FPE_FLTUND;
+		else if (fpcsr & SPR_FPCSR_DZF)
+			code = FPE_FLTDIV;
+		else if (fpcsr & SPR_FPCSR_IXF)
+			code = FPE_FLTRES;
+
+		/* Clear all flags */
+		regs->fpcsr &= ~SPR_FPCSR_ALLF;
+
+		force_sig_fault(SIGFPE, code, (void __user *)regs->pc);
+	} else {
+		pr_emerg("KERNEL: Illegal fpe exception 0x%.8lx\n", regs->pc);
+		die("Die:", regs, SIGFPE);
+	}
 }
 
 asmlinkage void do_trap(struct pt_regs *regs, unsigned long address)
 {
-	force_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->pc);
+	if (user_mode(regs)) {
+		force_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->pc);
+	} else {
+		pr_emerg("KERNEL: Illegal trap exception 0x%.8lx\n", regs->pc);
+		die("Die:", regs, SIGILL);
+	}
 }
 
 asmlinkage void do_unaligned_access(struct pt_regs *regs, unsigned long address)
diff --git linux-libre-6.6-gnu/arch/parisc/Kconfig linux-libre-6.6.46-gnu/arch/parisc/Kconfig
index a15ab147af2e..a077e6bf9475 100644
--- linux-libre-6.6-gnu/arch/parisc/Kconfig
+++ linux-libre-6.6.46-gnu/arch/parisc/Kconfig
@@ -14,9 +14,11 @@ config PARISC
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_NO_SG_CHAIN
+	select ARCH_SPLIT_ARG64 if !64BIT
 	select ARCH_SUPPORTS_HUGETLBFS if PA20
 	select ARCH_SUPPORTS_MEMORY_FAILURE
 	select ARCH_STACKWALK
+	select ARCH_HAS_CACHE_LINE_SIZE
 	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select HAVE_RELIABLE_STACKTRACE
 	select DMA_OPS
@@ -24,7 +26,6 @@ config PARISC
 	select RTC_DRV_GENERIC
 	select INIT_ALL_POSSIBLE
 	select BUG
-	select BUILDTIME_TABLE_SORT
 	select HAVE_PCI
 	select HAVE_PERF_EVENTS
 	select HAVE_KERNEL_BZIP2
@@ -83,6 +84,7 @@ config PARISC
 	select HAVE_SOFTIRQ_ON_OWN_STACK if IRQSTACKS
 	select TRACE_IRQFLAGS_SUPPORT
 	select HAVE_FUNCTION_DESCRIPTORS if 64BIT
+	select PCI_MSI_ARCH_FALLBACKS if PCI_MSI
 
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
@@ -113,9 +115,12 @@ config ARCH_HAS_ILOG2_U64
 	default n
 
 config GENERIC_BUG
-	bool
-	default y
+	def_bool y
 	depends on BUG
+	select GENERIC_BUG_RELATIVE_POINTERS if 64BIT
+
+config GENERIC_BUG_RELATIVE_POINTERS
+	bool
 
 config GENERIC_HWEIGHT
 	bool
@@ -138,11 +143,11 @@ config ARCH_MMAP_RND_COMPAT_BITS_MIN
 	default 8
 
 config ARCH_MMAP_RND_BITS_MAX
-	default 24 if 64BIT
-	default 17
+	default 18 if 64BIT
+	default 13
 
 config ARCH_MMAP_RND_COMPAT_BITS_MAX
-	default 17
+	default 13
 
 # unless you want to implement ACPI on PA-RISC ... ;-)
 config PM
diff --git linux-libre-6.6-gnu/arch/parisc/Makefile linux-libre-6.6.46-gnu/arch/parisc/Makefile
index 968ebe17494c..920db57b6b4c 100644
--- linux-libre-6.6-gnu/arch/parisc/Makefile
+++ linux-libre-6.6.46-gnu/arch/parisc/Makefile
@@ -177,12 +177,8 @@ vdso_prepare: prepare0
 	$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso32 include/generated/vdso32-offsets.h
 endif
 
-PHONY += vdso_install
-
-vdso_install:
-	$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso $@
-	$(if $(CONFIG_COMPAT_VDSO), \
-		$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso32 $@)
+vdso-install-y			+= arch/parisc/kernel/vdso32/vdso32.so
+vdso-install-$(CONFIG_64BIT)	+= arch/parisc/kernel/vdso64/vdso64.so
 
 install: KBUILD_IMAGE := vmlinux
 zinstall: KBUILD_IMAGE := vmlinuz
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/alternative.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/alternative.h
index 1ed45fd085d3..1eb488f25b83 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/alternative.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/alternative.h
@@ -34,7 +34,8 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end,
 
 /* Alternative SMP implementation. */
 #define ALTERNATIVE(cond, replacement)		"!0:"	\
-	".section .altinstructions, \"aw\"	!"	\
+	".section .altinstructions, \"a\"	!"	\
+	".align 4				!"	\
 	".word (0b-4-.)				!"	\
 	".hword 1, " __stringify(cond) "	!"	\
 	".word " __stringify(replacement) "	!"	\
@@ -44,7 +45,8 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end,
 
 /* to replace one single instructions by a new instruction */
 #define ALTERNATIVE(from, to, cond, replacement)\
-	.section .altinstructions, "aw"	!	\
+	.section .altinstructions, "a"	!	\
+	.align 4			!	\
 	.word (from - .)		!	\
 	.hword (to - from)/4, cond	!	\
 	.word replacement		!	\
@@ -52,7 +54,8 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end,
 
 /* to replace multiple instructions by new code */
 #define ALTERNATIVE_CODE(from, num_instructions, cond, new_instr_ptr)\
-	.section .altinstructions, "aw"	!	\
+	.section .altinstructions, "a"	!	\
+	.align 4			!	\
 	.word (from - .)		!	\
 	.hword -num_instructions, cond	!	\
 	.word (new_instr_ptr - .)	!	\
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/assembly.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/assembly.h
index 75677b526b2b..000a28e1c5e8 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/assembly.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/assembly.h
@@ -97,26 +97,28 @@
 	 * version takes two arguments: a src and destination register.
 	 * However, the source and destination registers can not be
 	 * the same register.
+	 *
+	 * We use add,l to avoid clobbering the C/B bits in the PSW.
 	 */
 
 	.macro  tophys  grvirt, grphys
-	ldil    L%(__PAGE_OFFSET), \grphys
-	sub     \grvirt, \grphys, \grphys
+	ldil    L%(-__PAGE_OFFSET), \grphys
+	addl    \grvirt, \grphys, \grphys
 	.endm
-	
+
 	.macro  tovirt  grphys, grvirt
 	ldil    L%(__PAGE_OFFSET), \grvirt
-	add     \grphys, \grvirt, \grvirt
+	addl    \grphys, \grvirt, \grvirt
 	.endm
 
 	.macro  tophys_r1  gr
-	ldil    L%(__PAGE_OFFSET), %r1
-	sub     \gr, %r1, \gr
+	ldil    L%(-__PAGE_OFFSET), %r1
+	addl    \gr, %r1, \gr
 	.endm
-	
+
 	.macro  tovirt_r1  gr
 	ldil    L%(__PAGE_OFFSET), %r1
-	add     \gr, %r1, \gr
+	addl    \gr, %r1, \gr
 	.endm
 
 	.macro delay value
@@ -574,7 +576,9 @@
 	 */
 #define ASM_EXCEPTIONTABLE_ENTRY(fault_addr, except_addr)	\
 	.section __ex_table,"aw"			!	\
+	.align 4					!	\
 	.word (fault_addr - .), (except_addr - .)	!	\
+	or %r0,%r0,%r0					!	\
 	.previous
 
 
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/bug.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/bug.h
index 4b6d60b94124..833555f74ffa 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/bug.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/bug.h
@@ -17,24 +17,27 @@
 #define	PARISC_BUG_BREAK_ASM	"break 0x1f, 0x1fff"
 #define	PARISC_BUG_BREAK_INSN	0x03ffe01f  /* PARISC_BUG_BREAK_ASM */
 
-#if defined(CONFIG_64BIT)
-#define ASM_WORD_INSN		".dword\t"
+#ifdef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
+# define __BUG_REL(val) ".word " __stringify(val) " - ."
 #else
-#define ASM_WORD_INSN		".word\t"
+# define __BUG_REL(val) ".word " __stringify(val)
 #endif
 
+
 #ifdef CONFIG_DEBUG_BUGVERBOSE
 #define BUG()								\
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
-			     "\t.pushsection __bug_table,\"aw\"\n"	\
-			     "2:\t" ASM_WORD_INSN "1b, %c0\n"		\
-			     "\t.short %c1, %c2\n"			\
-			     "\t.org 2b+%c3\n"				\
+			     "\t.pushsection __bug_table,\"a\"\n"	\
+			     "\t.align 4\n"				\
+			     "2:\t" __BUG_REL(1b) "\n"			\
+			     "\t" __BUG_REL(%c0)  "\n"			\
+			     "\t.short %1, %2\n"			\
+			     "\t.blockz %3-2*4-2*2\n"			\
 			     "\t.popsection"				\
 			     : : "i" (__FILE__), "i" (__LINE__),	\
-			     "i" (0), "i" (sizeof(struct bug_entry)) ); \
+			     "i" (0), "i" (sizeof(struct bug_entry)) );	\
 		unreachable();						\
 	} while(0)
 
@@ -51,10 +54,12 @@
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
-			     "\t.pushsection __bug_table,\"aw\"\n"	\
-			     "2:\t" ASM_WORD_INSN "1b, %c0\n"		\
-			     "\t.short %c1, %c2\n"			\
-			     "\t.org 2b+%c3\n"				\
+			     "\t.pushsection __bug_table,\"a\"\n"	\
+			     "\t.align 4\n"				\
+			     "2:\t" __BUG_REL(1b) "\n"			\
+			     "\t" __BUG_REL(%c0)  "\n"			\
+			     "\t.short %1, %2\n"			\
+			     "\t.blockz %3-2*4-2*2\n"			\
 			     "\t.popsection"				\
 			     : : "i" (__FILE__), "i" (__LINE__),	\
 			     "i" (BUGFLAG_WARNING|(flags)),		\
@@ -65,10 +70,11 @@
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
-			     "\t.pushsection __bug_table,\"aw\"\n"	\
-			     "2:\t" ASM_WORD_INSN "1b\n"		\
-			     "\t.short %c0\n"				\
-			     "\t.org 2b+%c1\n"				\
+			     "\t.pushsection __bug_table,\"a\"\n"	\
+			     "\t.align 4\n"				\
+			     "2:\t" __BUG_REL(1b) "\n"			\
+			     "\t.short %0\n"				\
+			     "\t.blockz %1-4-2\n"			\
 			     "\t.popsection"				\
 			     : : "i" (BUGFLAG_WARNING|(flags)),		\
 			     "i" (sizeof(struct bug_entry)) );		\
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/cache.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/cache.h
index 2a60d7a72f1f..a3f0f100f219 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/cache.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/cache.h
@@ -20,7 +20,16 @@
 
 #define SMP_CACHE_BYTES L1_CACHE_BYTES
 
-#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
+#ifdef CONFIG_PA20
+#define ARCH_DMA_MINALIGN	128
+#else
+#define ARCH_DMA_MINALIGN	32
+#endif
+#define ARCH_KMALLOC_MINALIGN	16	/* ldcw requires 16-byte alignment */
+
+#define arch_slab_minalign()	((unsigned)dcache_stride)
+#define cache_line_size()	dcache_stride
+#define dma_get_cache_alignment cache_line_size
 
 #define __read_mostly __section(".data..read_mostly")
 
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/cacheflush.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/cacheflush.h
index b4006f2a9705..8394718870e1 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/cacheflush.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/cacheflush.h
@@ -31,17 +31,17 @@ void flush_cache_all_local(void);
 void flush_cache_all(void);
 void flush_cache_mm(struct mm_struct *mm);
 
-void flush_kernel_dcache_page_addr(const void *addr);
-
 #define flush_kernel_dcache_range(start,size) \
 	flush_kernel_dcache_range_asm((start), (start)+(size));
 
+/* The only way to flush a vmap range is to flush whole cache */
 #define ARCH_IMPLEMENTS_FLUSH_KERNEL_VMAP_RANGE 1
 void flush_kernel_vmap_range(void *vaddr, int size);
 void invalidate_kernel_vmap_range(void *vaddr, int size);
 
-#define flush_cache_vmap(start, end)		flush_cache_all()
-#define flush_cache_vunmap(start, end)		flush_cache_all()
+void flush_cache_vmap(unsigned long start, unsigned long end);
+#define flush_cache_vmap_early(start, end)	do { } while (0)
+void flush_cache_vunmap(unsigned long start, unsigned long end);
 
 void flush_dcache_folio(struct folio *folio);
 #define flush_dcache_folio flush_dcache_folio
@@ -76,17 +76,11 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr,
 void flush_cache_range(struct vm_area_struct *vma,
 		unsigned long start, unsigned long end);
 
-/* defined in pacache.S exported in cache.c used by flush_anon_page */
-void flush_dcache_page_asm(unsigned long phys_addr, unsigned long vaddr);
-
 #define ARCH_HAS_FLUSH_ANON_PAGE
 void flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr);
 
 #define ARCH_HAS_FLUSH_ON_KUNMAP
-static inline void kunmap_flush_on_unmap(const void *addr)
-{
-	flush_kernel_dcache_page_addr(addr);
-}
+void kunmap_flush_on_unmap(const void *addr);
 
 #endif /* _PARISC_CACHEFLUSH_H */
 
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/checksum.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/checksum.h
index 3c43baca7b39..2aceebcd695c 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/checksum.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/checksum.h
@@ -40,7 +40,7 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 "	addc		%0, %5, %0\n"
 "	addc		%0, %3, %0\n"
 "1:	ldws,ma		4(%1), %3\n"
-"	addib,<		0, %2, 1b\n"
+"	addib,>		-1, %2, 1b\n"
 "	addc		%0, %3, %0\n"
 "\n"
 "	extru		%0, 31, 16, %4\n"
@@ -126,6 +126,7 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 	** Try to keep 4 registers with "live" values ahead of the ALU.
 	*/
 
+"	depdi		0, 31, 32, %0\n"/* clear upper half of incoming checksum */
 "	ldd,ma		8(%1), %4\n"	/* get 1st saddr word */
 "	ldd,ma		8(%2), %5\n"	/* get 1st daddr word */
 "	add		%4, %0, %0\n"
@@ -137,8 +138,8 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 "	add,dc		%3, %0, %0\n"  /* fold in proto+len | carry bit */
 "	extrd,u		%0, 31, 32, %4\n"/* copy upper half down */
 "	depdi		0, 31, 32, %0\n"/* clear upper half */
-"	add		%4, %0, %0\n"	/* fold into 32-bits */
-"	addc		0, %0, %0\n"	/* add carry */
+"	add,dc		%4, %0, %0\n"	/* fold into 32-bits, plus carry */
+"	addc		0, %0, %0\n"	/* add final carry */
 
 #else
 
@@ -163,7 +164,8 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 "	ldw,ma		4(%2), %7\n"	/* 4th daddr */
 "	addc		%6, %0, %0\n"
 "	addc		%7, %0, %0\n"
-"	addc		%3, %0, %0\n"	/* fold in proto+len, catch carry */
+"	addc		%3, %0, %0\n"	/* fold in proto+len */
+"	addc		0, %0, %0\n"	/* add carry */
 
 #endif
 	: "=r" (sum), "=r" (saddr), "=r" (daddr), "=r" (len),
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/elf.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/elf.h
index 140eaa97bf21..2d73d3c3cd37 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/elf.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/elf.h
@@ -349,15 +349,7 @@ struct pt_regs;	/* forward declaration... */
 
 #define ELF_HWCAP	0
 
-/* Masks for stack and mmap randomization */
-#define BRK_RND_MASK	(is_32bit_task() ? 0x07ffUL : 0x3ffffUL)
-#define MMAP_RND_MASK	(is_32bit_task() ? 0x1fffUL : 0x3ffffUL)
-#define STACK_RND_MASK	MMAP_RND_MASK
-
-struct mm_struct;
-extern unsigned long arch_randomize_brk(struct mm_struct *);
-#define arch_randomize_brk arch_randomize_brk
-
+#define STACK_RND_MASK	0x7ff	/* 8MB of VA */
 
 #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
 struct linux_binprm;
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/extable.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/extable.h
new file mode 100644
index 000000000000..4ea23e3d79dc
--- /dev/null
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/extable.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PARISC_EXTABLE_H
+#define __PARISC_EXTABLE_H
+
+#include <asm/ptrace.h>
+#include <linux/compiler.h>
+
+/*
+ * The exception table consists of three addresses:
+ *
+ * - A relative address to the instruction that is allowed to fault.
+ * - A relative address at which the program should continue (fixup routine)
+ * - An asm statement which specifies which CPU register will
+ *   receive -EFAULT when an exception happens if the lowest bit in
+ *   the fixup address is set.
+ *
+ * Note: The register specified in the err_opcode instruction will be
+ * modified at runtime if a fault happens. Register %r0 will be ignored.
+ *
+ * Since relative addresses are used, 32bit values are sufficient even on
+ * 64bit kernel.
+ */
+
+struct pt_regs;
+int fixup_exception(struct pt_regs *regs);
+
+#define ARCH_HAS_RELATIVE_EXTABLE
+struct exception_table_entry {
+	int insn;	/* relative address of insn that is allowed to fault. */
+	int fixup;	/* relative address of fixup routine */
+	int err_opcode; /* sample opcode with register which holds error code */
+};
+
+#define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr, opcode )\
+	".section __ex_table,\"aw\"\n"			   \
+	".align 4\n"					   \
+	".word (" #fault_addr " - .), (" #except_addr " - .)\n" \
+	opcode "\n"					   \
+	".previous\n"
+
+/*
+ * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
+ * (with lowest bit set) for which the fault handler in fixup_exception() will
+ * load -EFAULT on fault into the register specified by the err_opcode instruction,
+ * and zeroes the target register in case of a read fault in get_user().
+ */
+#define ASM_EXCEPTIONTABLE_VAR(__err_var)		\
+	int __err_var = 0
+#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr, register )\
+	ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1, "or %%r0,%%r0," register)
+
+static inline void swap_ex_entry_fixup(struct exception_table_entry *a,
+				       struct exception_table_entry *b,
+				       struct exception_table_entry tmp,
+				       int delta)
+{
+	a->fixup = b->fixup + delta;
+	b->fixup = tmp.fixup - delta;
+	a->err_opcode = b->err_opcode;
+	b->err_opcode = tmp.err_opcode;
+}
+#define swap_ex_entry_fixup swap_ex_entry_fixup
+
+#endif
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/jump_label.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/jump_label.h
index af2a598bc0f8..317ebc5edc9f 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/jump_label.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/jump_label.h
@@ -12,13 +12,15 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 "nop\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
+		 ".align %1\n\t"
 		 ".word 1b - ., %l[l_yes] - .\n\t"
 		 __stringify(ASM_ULONG_INSN) " %c0 - .\n\t"
 		 ".popsection\n\t"
-		 : :  "i" (&((char *)key)[branch]) :  : l_yes);
+		 : : "i" (&((char *)key)[branch]), "i" (sizeof(long))
+		 : : l_yes);
 
 	return false;
 l_yes:
@@ -27,13 +29,15 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 "b,n %l[l_yes]\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
+		 ".align %1\n\t"
 		 ".word 1b - ., %l[l_yes] - .\n\t"
 		 __stringify(ASM_ULONG_INSN) " %c0 - .\n\t"
 		 ".popsection\n\t"
-		 : :  "i" (&((char *)key)[branch]) :  : l_yes);
+		 : : "i" (&((char *)key)[branch]), "i" (sizeof(long))
+		 : : l_yes);
 
 	return false;
 l_yes:
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/ldcw.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/ldcw.h
index ee9e071859b2..47ebc4c91eaf 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/ldcw.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/ldcw.h
@@ -55,7 +55,7 @@
 })
 
 #ifdef CONFIG_SMP
-# define __lock_aligned __section(".data..lock_aligned")
+# define __lock_aligned __section(".data..lock_aligned") __aligned(16)
 #endif
 
 #endif /* __PARISC_LDCW_H */
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/mman.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/mman.h
new file mode 100644
index 000000000000..47c5a1991d10
--- /dev/null
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/mman.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MMAN_H__
+#define __ASM_MMAN_H__
+
+#include <uapi/asm/mman.h>
+
+/* PARISC cannot allow mdwe as it needs writable stacks */
+static inline bool arch_memory_deny_write_exec_supported(void)
+{
+	return false;
+}
+#define arch_memory_deny_write_exec_supported arch_memory_deny_write_exec_supported
+
+#endif /* __ASM_MMAN_H__ */
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/page.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/page.h
index 667e703c0e8f..d6ad1812866a 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/page.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/page.h
@@ -16,6 +16,7 @@
 #define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
 
 #ifndef __ASSEMBLY__
 
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/pgtable.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/pgtable.h
index 974accac05cd..babf65751e81 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/pgtable.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/pgtable.h
@@ -448,14 +448,17 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
 	return pte;
 }
 
+static inline pte_t ptep_get(pte_t *ptep)
+{
+	return READ_ONCE(*ptep);
+}
+#define ptep_get ptep_get
+
 static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
 {
 	pte_t pte;
 
-	if (!pte_young(*ptep))
-		return 0;
-
-	pte = *ptep;
+	pte = ptep_get(ptep);
 	if (!pte_young(pte)) {
 		return 0;
 	}
@@ -463,17 +466,10 @@ static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned
 	return 1;
 }
 
-struct mm_struct;
-static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-	pte_t old_pte;
-
-	old_pte = *ptep;
-	set_pte(ptep, __pte(0));
-
-	return old_pte;
-}
+int ptep_clear_flush_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep);
+pte_t ptep_clear_flush(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep);
 
+struct mm_struct;
 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
 	set_pte(ptep, pte_wrprotect(*ptep));
@@ -511,7 +507,8 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
 
 #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+#define __HAVE_ARCH_PTEP_CLEAR_FLUSH
 #define __HAVE_ARCH_PTEP_SET_WRPROTECT
 #define __HAVE_ARCH_PTE_SAME
 
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/processor.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/processor.h
index ff6cbdb6903b..ece4b3046515 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/processor.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/processor.h
@@ -47,6 +47,8 @@
 
 #ifndef __ASSEMBLY__
 
+struct rlimit;
+unsigned long mmap_upper_limit(struct rlimit *rlim_stack);
 unsigned long calc_max_stack_size(unsigned long stack_max);
 
 /*
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/signal.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/signal.h
index 715c96ba2ec8..e84883c6b4c7 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/signal.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/signal.h
@@ -4,23 +4,11 @@
 
 #include <uapi/asm/signal.h>
 
-#define _NSIG		64
-/* bits-per-word, where word apparently means 'long' not 'int' */
-#define _NSIG_BPW	BITS_PER_LONG
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
 # ifndef __ASSEMBLY__
 
 /* Most things should be clean enough to redefine this at will, if care
    is taken to make libc match.  */
 
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	/* next_signal() assumes this is a long - no choice */
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
 #include <asm/sigcontext.h>
 
 #endif /* !__ASSEMBLY */
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/special_insns.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/special_insns.h
index c822bd0c0e3c..51f40eaf7780 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/special_insns.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/special_insns.h
@@ -8,7 +8,8 @@
 		"copy %%r0,%0\n"			\
 		"8:\tlpa %%r0(%1),%0\n"			\
 		"9:\n"					\
-		ASM_EXCEPTIONTABLE_ENTRY(8b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY(8b, 9b,	\
+				"or %%r0,%%r0,%%r0")	\
 		: "=&r" (pa)				\
 		: "r" (va)				\
 		: "memory"				\
@@ -22,7 +23,8 @@
 		"copy %%r0,%0\n"			\
 		"8:\tlpa %%r0(%%sr3,%1),%0\n"		\
 		"9:\n"					\
-		ASM_EXCEPTIONTABLE_ENTRY(8b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY(8b, 9b,	\
+				"or %%r0,%%r0,%%r0")	\
 		: "=&r" (pa)				\
 		: "r" (va)				\
 		: "memory"				\
diff --git linux-libre-6.6-gnu/arch/parisc/include/asm/uaccess.h linux-libre-6.6.46-gnu/arch/parisc/include/asm/uaccess.h
index 2bf660eabe42..88d0ae5769dd 100644
--- linux-libre-6.6-gnu/arch/parisc/include/asm/uaccess.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/asm/uaccess.h
@@ -7,6 +7,7 @@
  */
 #include <asm/page.h>
 #include <asm/cache.h>
+#include <asm/extable.h>
 
 #include <linux/bug.h>
 #include <linux/string.h>
@@ -26,36 +27,6 @@
 #define STD_USER(sr, x, ptr)	__put_user_asm(sr, "std", x, ptr)
 #endif
 
-/*
- * The exception table contains two values: the first is the relative offset to
- * the address of the instruction that is allowed to fault, and the second is
- * the relative offset to the address of the fixup routine. Since relative
- * addresses are used, 32bit values are sufficient even on 64bit kernel.
- */
-
-#define ARCH_HAS_RELATIVE_EXTABLE
-struct exception_table_entry {
-	int insn;	/* relative address of insn that is allowed to fault. */
-	int fixup;	/* relative address of fixup routine */
-};
-
-#define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\
-	".section __ex_table,\"aw\"\n"			   \
-	".word (" #fault_addr " - .), (" #except_addr " - .)\n\t" \
-	".previous\n"
-
-/*
- * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
- * (with lowest bit set) for which the fault handler in fixup_exception() will
- * load -EFAULT into %r29 for a read or write fault, and zeroes the target
- * register in case of a read fault in get_user().
- */
-#define ASM_EXCEPTIONTABLE_REG	29
-#define ASM_EXCEPTIONTABLE_VAR(__variable)		\
-	register long __variable __asm__ ("r29") = 0
-#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr )\
-	ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1)
-
 #define __get_user_internal(sr, val, ptr)		\
 ({							\
 	ASM_EXCEPTIONTABLE_VAR(__gu_err);		\
@@ -82,7 +53,7 @@ struct exception_table_entry {
 							\
 	__asm__("1: " ldx " 0(%%sr%2,%3),%0\n"		\
 		"9:\n"					\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%1")	\
 		: "=r"(__gu_val), "+r"(__gu_err)        \
 		: "i"(sr), "r"(ptr));			\
 							\
@@ -114,8 +85,8 @@ struct exception_table_entry {
 		"1: ldw 0(%%sr%2,%3),%0\n"		\
 		"2: ldw 4(%%sr%2,%3),%R0\n"		\
 		"9:\n"					\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%1")	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b, "%1")	\
 		: "=&r"(__gu_tmp.l), "+r"(__gu_err)	\
 		: "i"(sr), "r"(ptr));			\
 							\
@@ -173,7 +144,7 @@ struct exception_table_entry {
 	__asm__ __volatile__ (					\
 		"1: " stx " %1,0(%%sr%2,%3)\n"			\
 		"9:\n"						\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)		\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%0")	\
 		: "+r"(__pu_err)				\
 		: "r"(x), "i"(sr), "r"(ptr))
 
@@ -185,15 +156,14 @@ struct exception_table_entry {
 		"1: stw %1,0(%%sr%2,%3)\n"			\
 		"2: stw %R1,4(%%sr%2,%3)\n"			\
 		"9:\n"						\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)		\
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)		\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%0")	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b, "%0")	\
 		: "+r"(__pu_err)				\
 		: "r"(__val), "i"(sr), "r"(ptr));		\
 } while (0)
 
 #endif /* !defined(CONFIG_64BIT) */
 
-
 /*
  * Complex access routines -- external declarations
  */
@@ -215,7 +185,4 @@ unsigned long __must_check raw_copy_from_user(void *dst, const void __user *src,
 #define INLINE_COPY_TO_USER
 #define INLINE_COPY_FROM_USER
 
-struct pt_regs;
-int fixup_exception(struct pt_regs *regs);
-
 #endif /* __PARISC_UACCESS_H */
diff --git linux-libre-6.6-gnu/arch/parisc/include/uapi/asm/errno.h linux-libre-6.6.46-gnu/arch/parisc/include/uapi/asm/errno.h
index 87245c584784..8d94739d75c6 100644
--- linux-libre-6.6-gnu/arch/parisc/include/uapi/asm/errno.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/uapi/asm/errno.h
@@ -75,7 +75,6 @@
 
 /* We now return you to your regularly scheduled HPUX. */
 
-#define ENOSYM		215	/* symbol does not exist in executable */
 #define	ENOTSOCK	216	/* Socket operation on non-socket */
 #define	EDESTADDRREQ	217	/* Destination address required */
 #define	EMSGSIZE	218	/* Message too long */
@@ -101,7 +100,6 @@
 #define	ETIMEDOUT	238	/* Connection timed out */
 #define	ECONNREFUSED	239	/* Connection refused */
 #define	EREFUSED	ECONNREFUSED	/* for HP's NFS apparently */
-#define	EREMOTERELEASE	240	/* Remote peer released connection */
 #define	EHOSTDOWN	241	/* Host is down */
 #define	EHOSTUNREACH	242	/* No route to host */
 
diff --git linux-libre-6.6-gnu/arch/parisc/include/uapi/asm/pdc.h linux-libre-6.6.46-gnu/arch/parisc/include/uapi/asm/pdc.h
index 7a90070136e8..8e38a86996fc 100644
--- linux-libre-6.6-gnu/arch/parisc/include/uapi/asm/pdc.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/uapi/asm/pdc.h
@@ -472,6 +472,7 @@ struct pdc_model {		/* for PDC_MODEL */
 	unsigned long arch_rev;
 	unsigned long pot_key;
 	unsigned long curr_key;
+	unsigned long width;	/* default of PSW_W bit (1=enabled) */
 };
 
 struct pdc_cache_cf {		/* for PDC_CACHE  (I/D-caches) */
diff --git linux-libre-6.6-gnu/arch/parisc/include/uapi/asm/signal.h linux-libre-6.6.46-gnu/arch/parisc/include/uapi/asm/signal.h
index 8e4895c5ea5d..40d7a574c5dd 100644
--- linux-libre-6.6-gnu/arch/parisc/include/uapi/asm/signal.h
+++ linux-libre-6.6.46-gnu/arch/parisc/include/uapi/asm/signal.h
@@ -57,10 +57,20 @@
 
 #include <asm-generic/signal-defs.h>
 
+#define _NSIG		64
+#define _NSIG_BPW	(sizeof(unsigned long) * 8)
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
 # ifndef __ASSEMBLY__
 
 #  include <linux/types.h>
 
+typedef unsigned long old_sigset_t;	/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
 /* Avoid too many header ordering problems.  */
 struct siginfo;
 
diff --git linux-libre-6.6-gnu/arch/parisc/kernel/cache.c linux-libre-6.6.46-gnu/arch/parisc/kernel/cache.c
index 268d90a9325b..f7953b0391cf 100644
--- linux-libre-6.6-gnu/arch/parisc/kernel/cache.c
+++ linux-libre-6.6.46-gnu/arch/parisc/kernel/cache.c
@@ -20,6 +20,7 @@
 #include <linux/sched.h>
 #include <linux/sched/mm.h>
 #include <linux/syscalls.h>
+#include <linux/vmalloc.h>
 #include <asm/pdc.h>
 #include <asm/cache.h>
 #include <asm/cacheflush.h>
@@ -31,20 +32,31 @@
 #include <asm/mmu_context.h>
 #include <asm/cachectl.h>
 
+#define PTR_PAGE_ALIGN_DOWN(addr) PTR_ALIGN_DOWN(addr, PAGE_SIZE)
+
+/*
+ * When nonzero, use _PAGE_ACCESSED bit to try to reduce the number
+ * of page flushes done flush_cache_page_if_present. There are some
+ * pros and cons in using this option. It may increase the risk of
+ * random segmentation faults.
+ */
+#define CONFIG_FLUSH_PAGE_ACCESSED	0
+
 int split_tlb __ro_after_init;
 int dcache_stride __ro_after_init;
 int icache_stride __ro_after_init;
 EXPORT_SYMBOL(dcache_stride);
 
+/* Internal implementation in arch/parisc/kernel/pacache.S */
 void flush_dcache_page_asm(unsigned long phys_addr, unsigned long vaddr);
 EXPORT_SYMBOL(flush_dcache_page_asm);
 void purge_dcache_page_asm(unsigned long phys_addr, unsigned long vaddr);
 void flush_icache_page_asm(unsigned long phys_addr, unsigned long vaddr);
-
-/* Internal implementation in arch/parisc/kernel/pacache.S */
 void flush_data_cache_local(void *);  /* flushes local data-cache only */
 void flush_instruction_cache_local(void); /* flushes local code-cache only */
 
+static void flush_kernel_dcache_page_addr(const void *addr);
+
 /* On some machines (i.e., ones with the Merced bus), there can be
  * only a single PxTLB broadcast at a time; this must be guaranteed
  * by software. We need a spinlock around all TLB flushes to ensure
@@ -58,7 +70,7 @@ int pa_serialize_tlb_flushes __ro_after_init;
 
 struct pdc_cache_info cache_info __ro_after_init;
 #ifndef CONFIG_PA20
-struct pdc_btlb_info btlb_info __ro_after_init;
+struct pdc_btlb_info btlb_info;
 #endif
 
 DEFINE_STATIC_KEY_TRUE(parisc_has_cache);
@@ -317,6 +329,18 @@ __flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr,
 {
 	if (!static_branch_likely(&parisc_has_cache))
 		return;
+
+	/*
+	 * The TLB is the engine of coherence on parisc.  The CPU is
+	 * entitled to speculate any page with a TLB mapping, so here
+	 * we kill the mapping then flush the page along a special flush
+	 * only alias mapping. This guarantees that the page is no-longer
+	 * in the cache for any process and nor may it be speculatively
+	 * read in (until the user or kernel specifically accesses it,
+	 * of course).
+	 */
+	flush_tlb_page(vma, vmaddr);
+
 	preempt_disable();
 	flush_dcache_page_asm(physaddr, vmaddr);
 	if (vma->vm_flags & VM_EXEC)
@@ -324,46 +348,44 @@ __flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr,
 	preempt_enable();
 }
 
-static void flush_user_cache_page(struct vm_area_struct *vma, unsigned long vmaddr)
+static void flush_kernel_dcache_page_addr(const void *addr)
 {
-	unsigned long flags, space, pgd, prot;
-#ifdef CONFIG_TLB_PTLOCK
-	unsigned long pgd_lock;
-#endif
+	unsigned long vaddr = (unsigned long)addr;
+	unsigned long flags;
 
-	vmaddr &= PAGE_MASK;
+	/* Purge TLB entry to remove translation on all CPUs */
+	purge_tlb_start(flags);
+	pdtlb(SR_KERNEL, addr);
+	purge_tlb_end(flags);
 
+	/* Use tmpalias flush to prevent data cache move-in */
 	preempt_disable();
+	flush_dcache_page_asm(__pa(vaddr), vaddr);
+	preempt_enable();
+}
 
-	/* Set context for flush */
-	local_irq_save(flags);
-	prot = mfctl(8);
-	space = mfsp(SR_USER);
-	pgd = mfctl(25);
-#ifdef CONFIG_TLB_PTLOCK
-	pgd_lock = mfctl(28);
-#endif
-	switch_mm_irqs_off(NULL, vma->vm_mm, NULL);
-	local_irq_restore(flags);
-
-	flush_user_dcache_range_asm(vmaddr, vmaddr + PAGE_SIZE);
-	if (vma->vm_flags & VM_EXEC)
-		flush_user_icache_range_asm(vmaddr, vmaddr + PAGE_SIZE);
-	flush_tlb_page(vma, vmaddr);
+static void flush_kernel_icache_page_addr(const void *addr)
+{
+	unsigned long vaddr = (unsigned long)addr;
+	unsigned long flags;
 
-	/* Restore previous context */
-	local_irq_save(flags);
-#ifdef CONFIG_TLB_PTLOCK
-	mtctl(pgd_lock, 28);
-#endif
-	mtctl(pgd, 25);
-	mtsp(space, SR_USER);
-	mtctl(prot, 8);
-	local_irq_restore(flags);
+	/* Purge TLB entry to remove translation on all CPUs */
+	purge_tlb_start(flags);
+	pdtlb(SR_KERNEL, addr);
+	purge_tlb_end(flags);
 
+	/* Use tmpalias flush to prevent instruction cache move-in */
+	preempt_disable();
+	flush_icache_page_asm(__pa(vaddr), vaddr);
 	preempt_enable();
 }
 
+void kunmap_flush_on_unmap(const void *addr)
+{
+	flush_kernel_dcache_page_addr(addr);
+}
+EXPORT_SYMBOL(kunmap_flush_on_unmap);
+
 void flush_icache_pages(struct vm_area_struct *vma, struct page *page,
 		unsigned int nr)
 {
@@ -371,13 +393,16 @@ void flush_icache_pages(struct vm_area_struct *vma, struct page *page,
 
 	for (;;) {
 		flush_kernel_dcache_page_addr(kaddr);
-		flush_kernel_icache_page(kaddr);
+		flush_kernel_icache_page_addr(kaddr);
 		if (--nr == 0)
 			break;
 		kaddr += PAGE_SIZE;
 	}
 }
 
+/*
+ * Walk page directory for MM to find PTEP pointer for address ADDR.
+ */
 static inline pte_t *get_ptep(struct mm_struct *mm, unsigned long addr)
 {
 	pte_t *ptep = NULL;
@@ -406,6 +431,41 @@ static inline bool pte_needs_flush(pte_t pte)
 		== (_PAGE_PRESENT | _PAGE_ACCESSED);
 }
 
+/*
+ * Return user physical address. Returns 0 if page is not present.
+ */
+static inline unsigned long get_upa(struct mm_struct *mm, unsigned long addr)
+{
+	unsigned long flags, space, pgd, prot, pa;
+#ifdef CONFIG_TLB_PTLOCK
+	unsigned long pgd_lock;
+#endif
+
+	/* Save context */
+	local_irq_save(flags);
+	prot = mfctl(8);
+	space = mfsp(SR_USER);
+	pgd = mfctl(25);
+#ifdef CONFIG_TLB_PTLOCK
+	pgd_lock = mfctl(28);
+#endif
+
+	/* Set context for lpa_user */
+	switch_mm_irqs_off(NULL, mm, NULL);
+	pa = lpa_user(addr);
+
+	/* Restore previous context */
+#ifdef CONFIG_TLB_PTLOCK
+	mtctl(pgd_lock, 28);
+#endif
+	mtctl(pgd, 25);
+	mtsp(space, SR_USER);
+	mtctl(prot, 8);
+	local_irq_restore(flags);
+
+	return pa;
+}
+
 void flush_dcache_folio(struct folio *folio)
 {
 	struct address_space *mapping = folio_flush_mapping(folio);
@@ -454,50 +514,23 @@ void flush_dcache_folio(struct folio *folio)
 		if (addr + nr * PAGE_SIZE > vma->vm_end)
 			nr = (vma->vm_end - addr) / PAGE_SIZE;
 
-		if (parisc_requires_coherency()) {
-			for (i = 0; i < nr; i++) {
-				pte_t *ptep = get_ptep(vma->vm_mm,
-							addr + i * PAGE_SIZE);
-				if (!ptep)
-					continue;
-				if (pte_needs_flush(*ptep))
-					flush_user_cache_page(vma,
-							addr + i * PAGE_SIZE);
-				/* Optimise accesses to the same table? */
-				pte_unmap(ptep);
-			}
-		} else {
+		if (old_addr == 0 || (old_addr & (SHM_COLOUR - 1))
+					!= (addr & (SHM_COLOUR - 1))) {
+			for (i = 0; i < nr; i++)
+				__flush_cache_page(vma,
+					addr + i * PAGE_SIZE,
+					(pfn + i) * PAGE_SIZE);
 			/*
-			 * The TLB is the engine of coherence on parisc:
-			 * The CPU is entitled to speculate any page
-			 * with a TLB mapping, so here we kill the
-			 * mapping then flush the page along a special
-			 * flush only alias mapping. This guarantees that
-			 * the page is no-longer in the cache for any
-			 * process and nor may it be speculatively read
-			 * in (until the user or kernel specifically
-			 * accesses it, of course)
+			 * Software is allowed to have any number
+			 * of private mappings to a page.
 			 */
-			for (i = 0; i < nr; i++)
-				flush_tlb_page(vma, addr + i * PAGE_SIZE);
-			if (old_addr == 0 || (old_addr & (SHM_COLOUR - 1))
-					!= (addr & (SHM_COLOUR - 1))) {
-				for (i = 0; i < nr; i++)
-					__flush_cache_page(vma,
-						addr + i * PAGE_SIZE,
-						(pfn + i) * PAGE_SIZE);
-				/*
-				 * Software is allowed to have any number
-				 * of private mappings to a page.
-				 */
-				if (!(vma->vm_flags & VM_SHARED))
-					continue;
-				if (old_addr)
-					pr_err("INEQUIVALENT ALIASES 0x%lx and 0x%lx in file %pD\n",
-						old_addr, addr, vma->vm_file);
-				if (nr == folio_nr_pages(folio))
-					old_addr = addr;
-			}
+			if (!(vma->vm_flags & VM_SHARED))
+				continue;
+			if (old_addr)
+				pr_err("INEQUIVALENT ALIASES 0x%lx and 0x%lx in file %pD\n",
+					old_addr, addr, vma->vm_file);
+			if (nr == folio_nr_pages(folio))
+				old_addr = addr;
 		}
 		WARN_ON(++count == 4096);
 	}
@@ -587,35 +620,28 @@ extern void purge_kernel_dcache_page_asm(unsigned long);
 extern void clear_user_page_asm(void *, unsigned long);
 extern void copy_user_page_asm(void *, void *, unsigned long);
 
-void flush_kernel_dcache_page_addr(const void *addr)
-{
-	unsigned long flags;
-
-	flush_kernel_dcache_page_asm(addr);
-	purge_tlb_start(flags);
-	pdtlb(SR_KERNEL, addr);
-	purge_tlb_end(flags);
-}
-EXPORT_SYMBOL(flush_kernel_dcache_page_addr);
-
 static void flush_cache_page_if_present(struct vm_area_struct *vma,
-	unsigned long vmaddr, unsigned long pfn)
+	unsigned long vmaddr)
 {
+#if CONFIG_FLUSH_PAGE_ACCESSED
 	bool needs_flush = false;
-	pte_t *ptep;
+	pte_t *ptep, pte;
 
-	/*
-	 * The pte check is racy and sometimes the flush will trigger
-	 * a non-access TLB miss. Hopefully, the page has already been
-	 * flushed.
-	 */
 	ptep = get_ptep(vma->vm_mm, vmaddr);
 	if (ptep) {
-		needs_flush = pte_needs_flush(*ptep);
+		pte = ptep_get(ptep);
+		needs_flush = pte_needs_flush(pte);
 		pte_unmap(ptep);
 	}
 	if (needs_flush)
-		flush_cache_page(vma, vmaddr, pfn);
+		__flush_cache_page(vma, vmaddr, PFN_PHYS(pte_pfn(pte)));
+#else
+	struct mm_struct *mm = vma->vm_mm;
+	unsigned long physaddr = get_upa(mm, vmaddr);
+
+	if (physaddr)
+		__flush_cache_page(vma, vmaddr, PAGE_ALIGN_DOWN(physaddr));
+#endif
 }
 
 void copy_user_highpage(struct page *to, struct page *from,
@@ -625,7 +651,7 @@ void copy_user_highpage(struct page *to, struct page *from,
 
 	kfrom = kmap_local_page(from);
 	kto = kmap_local_page(to);
-	flush_cache_page_if_present(vma, vaddr, page_to_pfn(from));
+	__flush_cache_page(vma, vaddr, PFN_PHYS(page_to_pfn(from)));
 	copy_page_asm(kto, kfrom);
 	kunmap_local(kto);
 	kunmap_local(kfrom);
@@ -634,16 +660,17 @@ void copy_user_highpage(struct page *to, struct page *from,
 void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 		unsigned long user_vaddr, void *dst, void *src, int len)
 {
-	flush_cache_page_if_present(vma, user_vaddr, page_to_pfn(page));
+	__flush_cache_page(vma, user_vaddr, PFN_PHYS(page_to_pfn(page)));
 	memcpy(dst, src, len);
-	flush_kernel_dcache_range_asm((unsigned long)dst, (unsigned long)dst + len);
+	flush_kernel_dcache_page_addr(PTR_PAGE_ALIGN_DOWN(dst));
 }
 
 void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
 		unsigned long user_vaddr, void *dst, void *src, int len)
 {
-	flush_cache_page_if_present(vma, user_vaddr, page_to_pfn(page));
+	__flush_cache_page(vma, user_vaddr, PFN_PHYS(page_to_pfn(page)));
 	memcpy(dst, src, len);
+	flush_kernel_dcache_page_addr(PTR_PAGE_ALIGN_DOWN(src));
 }
 
 /* __flush_tlb_range()
@@ -677,32 +704,10 @@ int __flush_tlb_range(unsigned long sid, unsigned long start,
 
 static void flush_cache_pages(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
-	unsigned long addr, pfn;
-	pte_t *ptep;
-
-	for (addr = start; addr < end; addr += PAGE_SIZE) {
-		bool needs_flush = false;
-		/*
-		 * The vma can contain pages that aren't present. Although
-		 * the pte search is expensive, we need the pte to find the
-		 * page pfn and to check whether the page should be flushed.
-		 */
-		ptep = get_ptep(vma->vm_mm, addr);
-		if (ptep) {
-			needs_flush = pte_needs_flush(*ptep);
-			pfn = pte_pfn(*ptep);
-			pte_unmap(ptep);
-		}
-		if (needs_flush) {
-			if (parisc_requires_coherency()) {
-				flush_user_cache_page(vma, addr);
-			} else {
-				if (WARN_ON(!pfn_valid(pfn)))
-					return;
-				__flush_cache_page(vma, addr, PFN_PHYS(pfn));
-			}
-		}
-	}
+	unsigned long addr;
+
+	for (addr = start; addr < end; addr += PAGE_SIZE)
+		flush_cache_page_if_present(vma, addr);
 }
 
 static inline unsigned long mm_total_size(struct mm_struct *mm)
@@ -753,21 +758,19 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
 		if (WARN_ON(IS_ENABLED(CONFIG_SMP) && arch_irqs_disabled()))
 			return;
 		flush_tlb_range(vma, start, end);
-		flush_cache_all();
+		if (vma->vm_flags & VM_EXEC)
+			flush_cache_all();
+		else
+			flush_data_cache();
 		return;
 	}
 
-	flush_cache_pages(vma, start, end);
+	flush_cache_pages(vma, start & PAGE_MASK, end);
 }
 
 void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn)
 {
-	if (WARN_ON(!pfn_valid(pfn)))
-		return;
-	if (parisc_requires_coherency())
-		flush_user_cache_page(vma, vmaddr);
-	else
-		__flush_cache_page(vma, vmaddr, PFN_PHYS(pfn));
+	__flush_cache_page(vma, vmaddr, PFN_PHYS(pfn));
 }
 
 void flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr)
@@ -775,34 +778,133 @@ void flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned lon
 	if (!PageAnon(page))
 		return;
 
-	if (parisc_requires_coherency()) {
-		if (vma->vm_flags & VM_SHARED)
-			flush_data_cache();
-		else
-			flush_user_cache_page(vma, vmaddr);
+	__flush_cache_page(vma, vmaddr, PFN_PHYS(page_to_pfn(page)));
+}
+
+int ptep_clear_flush_young(struct vm_area_struct *vma, unsigned long addr,
+			   pte_t *ptep)
+{
+	pte_t pte = ptep_get(ptep);
+
+	if (!pte_young(pte))
+		return 0;
+	set_pte(ptep, pte_mkold(pte));
+#if CONFIG_FLUSH_PAGE_ACCESSED
+	__flush_cache_page(vma, addr, PFN_PHYS(pte_pfn(pte)));
+#endif
+	return 1;
+}
+
+/*
+ * After a PTE is cleared, we have no way to flush the cache for
+ * the physical page. On PA8800 and PA8900 processors, these lines
+ * can cause random cache corruption. Thus, we must flush the cache
+ * as well as the TLB when clearing a PTE that's valid.
+ */
+pte_t ptep_clear_flush(struct vm_area_struct *vma, unsigned long addr,
+		       pte_t *ptep)
+{
+	struct mm_struct *mm = (vma)->vm_mm;
+	pte_t pte = ptep_get_and_clear(mm, addr, ptep);
+	unsigned long pfn = pte_pfn(pte);
+
+	if (pfn_valid(pfn))
+		__flush_cache_page(vma, addr, PFN_PHYS(pfn));
+	else if (pte_accessible(mm, pte))
+		flush_tlb_page(vma, addr);
+
+	return pte;
+}
+
+/*
+ * The physical address for pages in the ioremap case can be obtained
+ * from the vm_struct struct. I wasn't able to successfully handle the
+ * vmalloc and vmap cases. We have an array of struct page pointers in
+ * the uninitialized vmalloc case but the flush failed using page_to_pfn.
+ */
+void flush_cache_vmap(unsigned long start, unsigned long end)
+{
+	unsigned long addr, physaddr;
+	struct vm_struct *vm;
+
+	/* Prevent cache move-in */
+	flush_tlb_kernel_range(start, end);
+
+	if (end - start >= parisc_cache_flush_threshold) {
+		flush_cache_all();
 		return;
 	}
 
-	flush_tlb_page(vma, vmaddr);
-	preempt_disable();
-	flush_dcache_page_asm(page_to_phys(page), vmaddr);
-	preempt_enable();
+	if (WARN_ON_ONCE(!is_vmalloc_addr((void *)start))) {
+		flush_cache_all();
+		return;
+	}
+
+	vm = find_vm_area((void *)start);
+	if (WARN_ON_ONCE(!vm)) {
+		flush_cache_all();
+		return;
+	}
+
+	/* The physical addresses of IOREMAP regions are contiguous */
+	if (vm->flags & VM_IOREMAP) {
+		physaddr = vm->phys_addr;
+		for (addr = start; addr < end; addr += PAGE_SIZE) {
+			preempt_disable();
+			flush_dcache_page_asm(physaddr, start);
+			flush_icache_page_asm(physaddr, start);
+			preempt_enable();
+			physaddr += PAGE_SIZE;
+		}
+		return;
+	}
+
+	flush_cache_all();
 }
+EXPORT_SYMBOL(flush_cache_vmap);
 
+/*
+ * The vm_struct has been retired and the page table is set up. The
+ * last page in the range is a guard page. Its physical address can't
+ * be determined using lpa, so there is no way to flush the range
+ * using flush_dcache_page_asm.
+ */
+void flush_cache_vunmap(unsigned long start, unsigned long end)
+{
+	/* Prevent cache move-in */
+	flush_tlb_kernel_range(start, end);
+	flush_data_cache();
+}
+EXPORT_SYMBOL(flush_cache_vunmap);
+
+/*
+ * On systems with PA8800/PA8900 processors, there is no way to flush
+ * a vmap range other than using the architected loop to flush the
+ * entire cache. The page directory is not set up, so we can't use
+ * fdc, etc. FDCE/FICE don't work to flush a portion of the cache.
+ * L2 is physically indexed but FDCE/FICE instructions in virtual
+ * mode output their virtual address on the core bus, not their
+ * real address. As a result, the L2 cache index formed from the
+ * virtual address will most likely not be the same as the L2 index
+ * formed from the real address.
+ */
 void flush_kernel_vmap_range(void *vaddr, int size)
 {
 	unsigned long start = (unsigned long)vaddr;
 	unsigned long end = start + size;
 
-	if ((!IS_ENABLED(CONFIG_SMP) || !arch_irqs_disabled()) &&
-	    (unsigned long)size >= parisc_cache_flush_threshold) {
-		flush_tlb_kernel_range(start, end);
-		flush_data_cache();
+	flush_tlb_kernel_range(start, end);
+
+	if (!static_branch_likely(&parisc_has_dcache))
+		return;
+
+	/* If interrupts are disabled, we can only do local flush */
+	if (WARN_ON(IS_ENABLED(CONFIG_SMP) && arch_irqs_disabled())) {
+		flush_data_cache_local(NULL);
 		return;
 	}
 
-	flush_kernel_dcache_range_asm(start, end);
-	flush_tlb_kernel_range(start, end);
+	flush_data_cache();
 }
 EXPORT_SYMBOL(flush_kernel_vmap_range);
 
@@ -814,15 +916,18 @@ void invalidate_kernel_vmap_range(void *vaddr, int size)
 	/* Ensure DMA is complete */
 	asm_syncdma();
 
-	if ((!IS_ENABLED(CONFIG_SMP) || !arch_irqs_disabled()) &&
-	    (unsigned long)size >= parisc_cache_flush_threshold) {
-		flush_tlb_kernel_range(start, end);
-		flush_data_cache();
+	flush_tlb_kernel_range(start, end);
+
+	if (!static_branch_likely(&parisc_has_dcache))
+		return;
+
+	/* If interrupts are disabled, we can only do local flush */
+	if (WARN_ON(IS_ENABLED(CONFIG_SMP) && arch_irqs_disabled())) {
+		flush_data_cache_local(NULL);
 		return;
 	}
 
-	purge_kernel_dcache_range_asm(start, end);
-	flush_tlb_kernel_range(start, end);
+	flush_data_cache();
 }
 EXPORT_SYMBOL(invalidate_kernel_vmap_range);
 
@@ -850,7 +955,7 @@ SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
 #endif
 			"   fic,m	%3(%4,%0)\n"
 			"2: sync\n"
-			ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b)
+			ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b, "%1")
 			: "+r" (start), "+r" (error)
 			: "r" (end), "r" (dcache_stride), "i" (SR_USER));
 	}
@@ -865,7 +970,7 @@ SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
 #endif
 			"   fdc,m	%3(%4,%0)\n"
 			"2: sync\n"
-			ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b)
+			ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b, "%1")
 			: "+r" (start), "+r" (error)
 			: "r" (end), "r" (icache_stride), "i" (SR_USER));
 	}
diff --git linux-libre-6.6-gnu/arch/parisc/kernel/drivers.c linux-libre-6.6.46-gnu/arch/parisc/kernel/drivers.c
index ed8b75948061..8be4558ef33c 100644
--- linux-libre-6.6-gnu/arch/parisc/kernel/drivers.c
+++ linux-libre-6.6.46-gnu/arch/parisc/kernel/drivers.c
@@ -1004,6 +1004,9 @@ static __init int qemu_print_iodc_data(struct device *lin_dev, void *data)
 
 	pr_info("\n");
 
+	/* Prevent hung task messages when printing on serial console */
+	cond_resched();
+
 	pr_info("#define HPA_%08lx_DESCRIPTION \"%s\"\n",
 		hpa, parisc_hardware_description(&dev->id));
 
diff --git linux-libre-6.6-gnu/arch/parisc/kernel/entry.S linux-libre-6.6.46-gnu/arch/parisc/kernel/entry.S
index ae03b8679696..ab23e61a6f01 100644
--- linux-libre-6.6-gnu/arch/parisc/kernel/entry.S
+++ linux-libre-6.6.46-gnu/arch/parisc/kernel/entry.S
@@ -36,6 +36,24 @@
 	.level 2.0
 #endif
 
+/*
+ * We need seven instructions after a TLB insert for it to take effect.
+ * The PA8800/PA8900 processors are an exception and need 12 instructions.
+ * The RFI changes both IAOQ_Back and IAOQ_Front, so it counts as one.
+ */
+#ifdef CONFIG_64BIT
+#define NUM_PIPELINE_INSNS    12
+#else
+#define NUM_PIPELINE_INSNS    7
+#endif
+
+	/* Insert num nops */
+	.macro	insert_nops num
+	.rept \num
+	nop
+	.endr
+	.endm
+
 	/* Get aligned page_table_lock address for this mm from cr28/tr4 */
 	.macro  get_ptl reg
 	mfctl	%cr28,\reg
@@ -415,24 +433,20 @@
 3:
 	.endm
 
-	/* Release page_table_lock without reloading lock address.
-	   We use an ordered store to ensure all prior accesses are
-	   performed prior to releasing the lock. */
-	.macro		ptl_unlock0	spc,tmp,tmp2
+	/* Release page_table_lock if for user space. We use an ordered
+	   store to ensure all prior accesses are performed prior to
+	   releasing the lock. Note stw may not be executed, so we
+	   provide one extra nop