diff --git linux-libre-6.1-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd linux-libre-6.1.44-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
index 8e2c2c405db2..3becc9a82bdf 100644
--- linux-libre-6.1-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
+++ linux-libre-6.1.44-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
@@ -22,6 +22,7 @@ Date:           Oct 25, 2019
 KernelVersion:  5.6.0
 Contact:        dmaengine@vger.kernel.org
 Description:    The largest number of work descriptors in a batch.
+                It's not visible when the device does not support batch.
 
 What:           /sys/bus/dsa/devices/dsa<m>/max_work_queues_size
 Date:           Oct 25, 2019
@@ -49,6 +50,8 @@ Description:    The total number of read buffers supported by this device.
 		The read buffers represent resources within the DSA
 		implementation, and these resources are allocated by engines to
 		support operations. See DSA spec v1.2 9.2.4 Total Read Buffers.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:           /sys/bus/dsa/devices/dsa<m>/max_transfer_size
 Date:           Oct 25, 2019
@@ -122,6 +125,8 @@ Contact:        dmaengine@vger.kernel.org
 Description:    The maximum number of read buffers that may be in use at
 		one time by operations that access low bandwidth memory in the
 		device. See DSA spec v1.2 9.2.8 GENCFG on Global Read Buffer Limit.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:		/sys/bus/dsa/devices/dsa<m>/cmd_status
 Date:		Aug 28, 2020
@@ -205,6 +210,7 @@ KernelVersion:	5.10.0
 Contact:	dmaengine@vger.kernel.org
 Description:	The max batch size for this workqueue. Cannot exceed device
 		max batch size. Configurable parameter.
+		It's not visible when the device does not support batch.
 
 What:		/sys/bus/dsa/devices/wq<m>.<n>/ats_disable
 Date:		Nov 13, 2020
@@ -250,6 +256,8 @@ KernelVersion:	5.17.0
 Contact:	dmaengine@vger.kernel.org
 Description:	Enable the use of global read buffer limit for the group. See DSA
 		spec v1.2 9.2.18 GRPCFG Use Global Read Buffer Limit.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:		/sys/bus/dsa/devices/group<m>.<n>/read_buffers_allowed
 Date:		Dec 10, 2021
@@ -258,6 +266,8 @@ Contact:	dmaengine@vger.kernel.org
 Description:	Indicates max number of read buffers that may be in use at one time
 		by all engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read
 		Buffers Allowed.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:		/sys/bus/dsa/devices/group<m>.<n>/read_buffers_reserved
 Date:		Dec 10, 2021
@@ -266,6 +276,8 @@ Contact:	dmaengine@vger.kernel.org
 Description:	Indicates the number of Read Buffers reserved for the use of
 		engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read Buffers
 		Reserved.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:		/sys/bus/dsa/devices/group<m>.<n>/desc_progress_limit
 Date:		Sept 14, 2022
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc linux-libre-6.1.44-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
index 611b23e6488d..feb3f2cc0c16 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
+++ linux-libre-6.1.44-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -52,7 +52,7 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Default output terminal descriptors
 
-		All attributes read only:
+		All attributes read only except bSourceID:
 
 		==============	=============================================
 		iTerminal	index of string descriptor
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor linux-libre-6.1.44-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
index d76cd3946434..e9ef69aef20b 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
+++ linux-libre-6.1.44-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
@@ -5,6 +5,9 @@ Contact:	linux-mtd@lists.infradead.org
 Description:	(RO) The JEDEC ID of the SPI NOR flash as reported by the
 		flash device.
 
+		The attribute is not present if the flash doesn't support
+		the "Read JEDEC ID" command (9Fh). This is the case for
+		non-JEDEC compliant flashes.
 
 What:		/sys/bus/spi/devices/.../spi-nor/manufacturer
 Date:		April 2021
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-6.1.44-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index f54867cadb0f..13c01b641dc7 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-6.1.44-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -513,17 +513,18 @@ Description:	information about CPUs heterogeneity.
 		cpu_capacity: capacity of cpuX.
 
 What:		/sys/devices/system/cpu/vulnerabilities
+		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+		/sys/devices/system/cpu/vulnerabilities/l1tf
+		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
+		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/retbleed
+		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
-		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
-		/sys/devices/system/cpu/vulnerabilities/l1tf
-		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/srbds
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
-		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
-		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
-		/sys/devices/system/cpu/vulnerabilities/retbleed
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-driver-eud linux-libre-6.1.44-gnu/Documentation/ABI/testing/sysfs-driver-eud
index 83f3872182a4..2bab0db2d2f0 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-driver-eud
+++ linux-libre-6.1.44-gnu/Documentation/ABI/testing/sysfs-driver-eud
@@ -1,4 +1,4 @@
-What:		/sys/bus/platform/drivers/eud/.../enable
+What:		/sys/bus/platform/drivers/qcom_eud/.../enable
 Date:           February 2022
 Contact:        Souradeep Chowdhury <quic_schowdhu@quicinc.com>
 Description:
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count linux-libre-6.1.44-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count
new file mode 100644
index 000000000000..156cca9dbc96
--- /dev/null
+++ linux-libre-6.1.44-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/oops_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Oopsed since last boot.
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count linux-libre-6.1.44-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count
new file mode 100644
index 000000000000..90a029813717
--- /dev/null
+++ linux-libre-6.1.44-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/warn_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Warned since last boot.
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-module linux-libre-6.1.44-gnu/Documentation/ABI/testing/sysfs-module
index 08886367d047..62addab47d0c 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-module
+++ linux-libre-6.1.44-gnu/Documentation/ABI/testing/sysfs-module
@@ -60,3 +60,14 @@ Description:	Module taint flags:
 			C   staging driver module
 			E   unsigned module
 			==  =====================
+
+What:		/sys/module/grant_table/parameters/free_per_iteration
+Date:		July 2023
+KernelVersion:	6.5 but backported to all supported stable branches
+Contact:	Xen developer discussion <xen-devel@lists.xenproject.org>
+Description:	Read and write number of grant entries to attempt to free per iteration.
+
+		Note: Future versions of Xen and Linux may provide a better
+		interface for controlling the rate of deferred grant reclaim
+		or may not need it at all.
+Users:		Qubes OS (https://www.qubes-os.org)
diff --git linux-libre-6.1-gnu/Documentation/accounting/psi.rst linux-libre-6.1.44-gnu/Documentation/accounting/psi.rst
index 5e40b3f437f9..df6062eb3abb 100644
--- linux-libre-6.1-gnu/Documentation/accounting/psi.rst
+++ linux-libre-6.1.44-gnu/Documentation/accounting/psi.rst
@@ -105,6 +105,10 @@ prevent overly frequent polling. Max limit is chosen as a high enough number
 after which monitors are most likely not needed and psi averages can be used
 instead.
 
+Unprivileged users can also create monitors, with the only limitation that the
+window size must be a multiple of 2s, in order to prevent excessive resource
+usage.
+
 When activated, psi monitor stays active for at least the duration of one
 tracking window to avoid repeated activations/deactivations when system is
 bouncing in and out of the stall state.
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/cgroup-v1/memory.rst linux-libre-6.1.44-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
index 5b86245450bd..2524061836ac 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
+++ linux-libre-6.1.44-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
@@ -86,6 +86,8 @@ Brief summary of control files.
  memory.swappiness		     set/show swappiness parameter of vmscan
 				     (See sysctl's vm.swappiness)
  memory.move_charge_at_immigrate     set/show controls of moving charges
+                                     This knob is deprecated and shouldn't be
+                                     used.
  memory.oom_control		     set/show oom controls.
  memory.numa_stat		     show the number of memory usage per numa
 				     node
@@ -716,8 +718,15 @@ NOTE2:
        It is recommended to set the soft limit always below the hard limit,
        otherwise the hard limit will take precedence.
 
-8. Move charges at task migration
-=================================
+8. Move charges at task migration (DEPRECATED!)
+===============================================
+
+THIS IS DEPRECATED!
+
+It's expensive and unreliable! It's better practice to launch workload
+tasks directly from inside their target cgroup. Use dedicated workload
+cgroups to allow fine-grained policy adjustments without having to
+move physical pages between control domains.
 
 Users can move charges associated with a task along with task migration, that
 is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/device-mapper/dm-init.rst linux-libre-6.1.44-gnu/Documentation/admin-guide/device-mapper/dm-init.rst
index e5242ff17e9b..981d6a907699 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/device-mapper/dm-init.rst
+++ linux-libre-6.1.44-gnu/Documentation/admin-guide/device-mapper/dm-init.rst
@@ -123,3 +123,11 @@ Other examples (per target):
     0 1638400 verity 1 8:1 8:2 4096 4096 204800 1 sha256
     fb1a5a0f00deb908d8b53cb270858975e76cf64105d412ce764225d53b8f3cfd
     51934789604d1b92399c52e7cb149d1b3a1b74bbbcb103b2a0aaacbed5c08584
+
+For setups using device-mapper on top of asynchronously probed block
+devices (MMC, USB, ..), it may be necessary to tell dm-init to
+explicitly wait for them to become available before setting up the
+device-mapper tables. This can be done with the "dm-mod.waitfor="
+module parameter, which takes a list of devices to wait for::
+
+  dm-mod.waitfor=<device1>[,..,<deviceN>]
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst linux-libre-6.1.44-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst
new file mode 100644
index 000000000000..ec6e9f5bcf9e
--- /dev/null
+++ linux-libre-6.1.44-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst
@@ -0,0 +1,92 @@
+
+.. SPDX-License-Identifier: GPL-2.0
+
+Cross-Thread Return Address Predictions
+=======================================
+
+Certain AMD and Hygon processors are subject to a cross-thread return address
+predictions vulnerability. When running in SMT mode and one sibling thread
+transitions out of C0 state, the other sibling thread could use return target
+predictions from the sibling thread that transitioned out of C0.
+
+The Spectre v2 mitigations protect the Linux kernel, as it fills the return
+address prediction entries with safe targets when context switching to the idle
+thread. However, KVM does allow a VMM to prevent exiting guest mode when
+transitioning out of C0. This could result in a guest-controlled return target
+being consumed by the sibling thread.
+
+Affected processors
+-------------------
+
+The following CPUs are vulnerable:
+
+    - AMD Family 17h processors
+    - Hygon Family 18h processors
+
+Related CVEs
+------------
+
+The following CVE entry is related to this issue:
+
+   ==============  =======================================
+   CVE-2022-27672  Cross-Thread Return Address Predictions
+   ==============  =======================================
+
+Problem
+-------
+
+Affected SMT-capable processors support 1T and 2T modes of execution when SMT
+is enabled. In 2T mode, both threads in a core are executing code. For the
+processor core to enter 1T mode, it is required that one of the threads
+requests to transition out of the C0 state. This can be communicated with the
+HLT instruction or with an MWAIT instruction that requests non-C0.
+When the thread re-enters the C0 state, the processor transitions back
+to 2T mode, assuming the other thread is also still in C0 state.
+
+In affected processors, the return address predictor (RAP) is partitioned
+depending on the SMT mode. For instance, in 2T mode each thread uses a private
+16-entry RAP, but in 1T mode, the active thread uses a 32-entry RAP. Upon
+transition between 1T/2T mode, the RAP contents are not modified but the RAP
+pointers (which control the next return target to use for predictions) may
+change. This behavior may result in return targets from one SMT thread being
+used by RET predictions in the sibling thread following a 1T/2T switch. In
+particular, a RET instruction executed immediately after a transition to 1T may
+use a return target from the thread that just became idle. In theory, this
+could lead to information disclosure if the return targets used do not come
+from trustworthy code.
+
+Attack scenarios
+----------------
+
+An attack can be mounted on affected processors by performing a series of CALL
+instructions with targeted return locations and then transitioning out of C0
+state.
+
+Mitigation mechanism
+--------------------
+
+Before entering idle state, the kernel context switches to the idle thread. The
+context switch fills the RAP entries (referred to as the RSB in Linux) with safe
+targets by performing a sequence of CALL instructions.
+
+Prevent a guest VM from directly putting the processor into an idle state by
+intercepting HLT and MWAIT instructions.
+
+Both mitigations are required to fully address this issue.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+Use existing Spectre v2 mitigations that will fill the RSB on context switch.
+
+Mitigation control for KVM - module parameter
+---------------------------------------------
+
+By default, the KVM hypervisor mitigates this issue by intercepting guest
+attempts to transition out of C0. A VMM can use the KVM_CAP_X86_DISABLE_EXITS
+capability to override those interceptions, but since this is not common, the
+mitigation that covers this path is not enabled by default.
+
+The mitigation for the KVM_CAP_X86_DISABLE_EXITS capability can be turned on
+using the boolean module parameter mitigate_smt_rsb, e.g.:
+        kvm.mitigate_smt_rsb=1
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst linux-libre-6.1.44-gnu/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
new file mode 100644
index 000000000000..264bfa937f7d
--- /dev/null
+++ linux-libre-6.1.44-gnu/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
@@ -0,0 +1,109 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+GDS - Gather Data Sampling
+==========================
+
+Gather Data Sampling is a hardware vulnerability which allows unprivileged
+speculative access to data which was previously stored in vector registers.
+
+Problem
+-------
+When a gather instruction performs loads from memory, different data elements
+are merged into the destination vector register. However, when a gather
+instruction that is transiently executed encounters a fault, stale data from
+architectural or internal vector registers may get transiently forwarded to the
+destination vector register instead. This will allow a malicious attacker to
+infer stale data using typical side channel techniques like cache timing
+attacks. GDS is a purely sampling-based attack.
+
+The attacker uses gather instructions to infer the stale vector register data.
+The victim does not need to do anything special other than use the vector
+registers. The victim does not need to use gather instructions to be
+vulnerable.
+
+Because the buffers are shared between Hyper-Threads cross Hyper-Thread attacks
+are possible.
+
+Attack scenarios
+----------------
+Without mitigation, GDS can infer stale data across virtually all
+permission boundaries:
+
+	Non-enclaves can infer SGX enclave data
+	Userspace can infer kernel data
+	Guests can infer data from hosts
+	Guest can infer guest from other guests
+	Users can infer data from other users
+
+Because of this, it is important to ensure that the mitigation stays enabled in
+lower-privilege contexts like guests and when running outside SGX enclaves.
+
+The hardware enforces the mitigation for SGX. Likewise, VMMs should  ensure
+that guests are not allowed to disable the GDS mitigation. If a host erred and
+allowed this, a guest could theoretically disable GDS mitigation, mount an
+attack, and re-enable it.
+
+Mitigation mechanism
+--------------------
+This issue is mitigated in microcode. The microcode defines the following new
+bits:
+
+ ================================   ===   ============================
+ IA32_ARCH_CAPABILITIES[GDS_CTRL]   R/O   Enumerates GDS vulnerability
+                                          and mitigation support.
+ IA32_ARCH_CAPABILITIES[GDS_NO]     R/O   Processor is not vulnerable.
+ IA32_MCU_OPT_CTRL[GDS_MITG_DIS]    R/W   Disables the mitigation
+                                          0 by default.
+ IA32_MCU_OPT_CTRL[GDS_MITG_LOCK]   R/W   Locks GDS_MITG_DIS=0. Writes
+                                          to GDS_MITG_DIS are ignored
+                                          Can't be cleared once set.
+ ================================   ===   ============================
+
+GDS can also be mitigated on systems that don't have updated microcode by
+disabling AVX. This can be done by setting gather_data_sampling="force" or
+"clearcpuid=avx" on the kernel command-line.
+
+If used, these options will disable AVX use by turning off XSAVE YMM support.
+However, the processor will still enumerate AVX support.  Userspace that
+does not follow proper AVX enumeration to check both AVX *and* XSAVE YMM
+support will break.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The mitigation can be disabled by setting "gather_data_sampling=off" or
+"mitigations=off" on the kernel command line. Not specifying either will default
+to the mitigation being enabled. Specifying "gather_data_sampling=force" will
+use the microcode mitigation when available or disable AVX on affected systems
+where the microcode hasn't been updated to include the mitigation.
+
+GDS System Information
+------------------------
+The kernel provides vulnerability status information through sysfs. For
+GDS this can be accessed by the following sysfs file:
+
+/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+
+The possible values contained in this file are:
+
+ ============================== =============================================
+ Not affected                   Processor not vulnerable.
+ Vulnerable                     Processor vulnerable and mitigation disabled.
+ Vulnerable: No microcode       Processor vulnerable and microcode is missing
+                                mitigation.
+ Mitigation: AVX disabled,
+ no microcode                   Processor is vulnerable and microcode is missing
+                                mitigation. AVX disabled as mitigation.
+ Mitigation: Microcode          Processor is vulnerable and mitigation is in
+                                effect.
+ Mitigation: Microcode (locked) Processor is vulnerable and mitigation is in
+                                effect and cannot be disabled.
+ Unknown: Dependent on
+ hypervisor status              Running on a virtual guest processor that is
+                                affected but with no way to know if host
+                                processor is mitigated or vulnerable.
+ ============================== =============================================
+
+GDS Default mitigation
+----------------------
+The updated microcode will enable the mitigation by default. The kernel's
+default action is to leave the mitigation enabled.
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-6.1.44-gnu/Documentation/admin-guide/hw-vuln/index.rst
index 4df436e7c417..6828102baaa7 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-6.1.44-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -18,3 +18,6 @@ are configurable at compile, boot or run time.
    core-scheduling.rst
    l1d_flush.rst
    processor_mmio_stale_data.rst
+   cross-thread-rsb.rst
+   gather_data_sampling.rst
+   srso
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-6.1.44-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
index c4dcdb3d0d45..a39bbfe9526b 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-6.1.44-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -479,8 +479,16 @@ Spectre variant 2
    On Intel Skylake-era systems the mitigation covers most, but not all,
    cases. See :ref:`[3] <spec_ref3>` for more details.
 
-   On CPUs with hardware mitigation for Spectre variant 2 (e.g. Enhanced
-   IBRS on x86), retpoline is automatically disabled at run time.
+   On CPUs with hardware mitigation for Spectre variant 2 (e.g. IBRS
+   or enhanced IBRS on x86), retpoline is automatically disabled at run time.
+
+   Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
+   boot, by setting the IBRS bit, and they're automatically protected against
+   Spectre v2 variant attacks, including cross-thread branch target injections
+   on SMT systems (STIBP). In other words, eIBRS enables STIBP too.
+
+   Legacy IBRS systems clear the IBRS bit on exit to userspace and
+   therefore explicitly enable STIBP for that
 
    The retpoline mitigation is turned on by default on vulnerable
    CPUs. It can be forced on or off by the administrator
@@ -504,9 +512,12 @@ Spectre variant 2
    For Spectre variant 2 mitigation, individual user programs
    can be compiled with return trampolines for indirect branches.
    This protects them from consuming poisoned entries in the branch
-   target buffer left by malicious software.  Alternatively, the
-   programs can disable their indirect branch speculation via prctl()
-   (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+   target buffer left by malicious software.
+
+   On legacy IBRS systems, at return to userspace, implicit STIBP is disabled
+   because the kernel clears the IBRS bit. In this case, the userspace programs
+   can disable indirect branch speculation via prctl() (See
+   :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
    On x86, this will turn on STIBP to guard against attacks from the
    sibling thread when the user program is running, and use IBPB to
    flush the branch target buffer when switching to/from the program.
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/srso.rst linux-libre-6.1.44-gnu/Documentation/admin-guide/hw-vuln/srso.rst
new file mode 100644
index 000000000000..2f923c805802
--- /dev/null
+++ linux-libre-6.1.44-gnu/Documentation/admin-guide/hw-vuln/srso.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Speculative Return Stack Overflow (SRSO)
+========================================
+
+This is a mitigation for the speculative return stack overflow (SRSO)
+vulnerability found on AMD processors. The mechanism is by now the well
+known scenario of poisoning CPU functional units - the Branch Target
+Buffer (BTB) and Return Address Predictor (RAP) in this case - and then
+tricking the elevated privilege domain (the kernel) into leaking
+sensitive data.
+
+AMD CPUs predict RET instructions using a Return Address Predictor (aka
+Return Address Stack/Return Stack Buffer). In some cases, a non-architectural
+CALL instruction (i.e., an instruction predicted to be a CALL but is
+not actually a CALL) can create an entry in the RAP which may be used
+to predict the target of a subsequent RET instruction.
+
+The specific circumstances that lead to this varies by microarchitecture
+but the concern is that an attacker can mis-train the CPU BTB to predict
+non-architectural CALL instructions in kernel space and use this to
+control the speculative target of a subsequent kernel RET, potentially
+leading to information disclosure via a speculative side-channel.
+
+The issue is tracked under CVE-2023-20569.
+
+Affected processors
+-------------------
+
+AMD Zen, generations 1-4. That is, all families 0x17 and 0x19. Older
+processors have not been investigated.
+
+System information and options
+------------------------------
+
+First of all, it is required that the latest microcode be loaded for
+mitigations to be effective.
+
+The sysfs file showing SRSO mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
+
+The possible values in this file are:
+
+ - 'Not affected'               The processor is not vulnerable
+
+ - 'Vulnerable: no microcode'   The processor is vulnerable, no
+                                microcode extending IBPB functionality
+                                to address the vulnerability has been
+                                applied.
+
+ - 'Mitigation: microcode'      Extended IBPB functionality microcode
+                                patch has been applied. It does not
+                                address User->Kernel and Guest->Host
+                                transitions protection but it does
+                                address User->User and VM->VM attack
+                                vectors.
+
+                                (spec_rstack_overflow=microcode)
+
+ - 'Mitigation: safe RET'       Software-only mitigation. It complements
+                                the extended IBPB microcode patch
+                                functionality by addressing User->Kernel
+                                and Guest->Host transitions protection.
+
+                                Selected by default or by
+                                spec_rstack_overflow=safe-ret
+
+ - 'Mitigation: IBPB'           Similar protection as "safe RET" above
+                                but employs an IBPB barrier on privilege
+                                domain crossings (User->Kernel,
+                                Guest->Host).
+
+                                (spec_rstack_overflow=ibpb)
+
+ - 'Mitigation: IBPB on VMEXIT' Mitigation addressing the cloud provider
+                                scenario - the Guest->Host transitions
+                                only.
+
+                                (spec_rstack_overflow=ibpb-vmexit)
+
+In order to exploit vulnerability, an attacker needs to:
+
+ - gain local access on the machine
+
+ - break kASLR
+
+ - find gadgets in the running kernel in order to use them in the exploit
+
+ - potentially create and pin an additional workload on the sibling
+   thread, depending on the microarchitecture (not necessary on fam 0x19)
+
+ - run the exploit
+
+Considering the performance implications of each mitigation type, the
+default one is 'Mitigation: safe RET' which should take care of most
+attack vectors, including the local User->Kernel one.
+
+As always, the user is advised to keep her/his system up-to-date by
+applying software updates regularly.
+
+The default setting will be reevaluated when needed and especially when
+new attack vectors appear.
+
+As one can surmise, 'Mitigation: safe RET' does come at the cost of some
+performance depending on the workload. If one trusts her/his userspace
+and does not want to suffer the performance impact, one can always
+disable the mitigation with spec_rstack_overflow=off.
+
+Similarly, 'Mitigation: IBPB' is another full mitigation type employing
+an indrect branch prediction barrier after having applied the required
+microcode patch for one's system. This mitigation comes also at
+a performance cost.
+
+Mitigation: safe RET
+--------------------
+
+The mitigation works by ensuring all RET instructions speculate to
+a controlled location, similar to how speculation is controlled in the
+retpoline sequence.  To accomplish this, the __x86_return_thunk forces
+the CPU to mispredict every function return using a 'safe return'
+sequence.
+
+To ensure the safety of this mitigation, the kernel must ensure that the
+safe return sequence is itself free from attacker interference.  In Zen3
+and Zen4, this is accomplished by creating a BTB alias between the
+untraining function srso_untrain_ret_alias() and the safe return
+function srso_safe_ret_alias() which results in evicting a potentially
+poisoned BTB entry and using that safe one for all function returns.
+
+In older Zen1 and Zen2, this is accomplished using a reinterpretation
+technique similar to Retbleed one: srso_untrain_ret() and
+srso_safe_ret().
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/kdump/gdbmacros.txt linux-libre-6.1.44-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
index 82aecdcae8a6..030de95e3e6b 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
+++ linux-libre-6.1.44-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
@@ -312,10 +312,10 @@ define dmesg
 			set var $prev_flags = $info->flags
 		end
 
-		set var $id = ($id + 1) & $id_mask
 		if ($id == $end_id)
 			loop_break
 		end
+		set var $id = ($id + 1) & $id_mask
 	end
 end
 document dmesg
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.1.44-gnu/Documentation/admin-guide/kernel-parameters.txt
index 42af9ca0127e..286be425f3bf 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.1.44-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -1593,6 +1593,26 @@
 			Format: off | on
 			default: on
 
+	gather_data_sampling=
+			[X86,INTEL] Control the Gather Data Sampling (GDS)
+			mitigation.
+
+			Gather Data Sampling is a hardware vulnerability which
+			allows unprivileged speculative access to data which was
+			previously stored in vector registers.
+
+			This issue is mitigated by default in updated microcode.
+			The mitigation may have a performance impact but can be
+			disabled. On systems without the microcode mitigation
+			disabling AVX serves as a mitigation.
+
+			force:	Disable AVX to mitigate systems without
+				microcode mitigation. No effect if the microcode
+				mitigation is present. Known to cause crashes in
+				userspace with buggy AVX enumeration.
+
+			off:	Disable GDS mitigation.
+
 	gcov_persist=	[GCOV] When non-zero (default), profiling data for
 			kernel modules is saved and remains accessible via
 			debugfs, even when the module is unloaded/reloaded.
@@ -2300,7 +2320,13 @@
 			Provide an override to the IOAPIC-ID<->DEVICE-ID
 			mapping provided in the IVRS ACPI table.
 			By default, PCI segment is 0, and can be omitted.
-			For example:
+
+			For example, to map IOAPIC-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_ioapic=10@0001:00:14.0
+
+			Deprecated formats:
 			* To map IOAPIC-ID decimal 10 to PCI device 00:14.0
 			  write the parameter as:
 				ivrs_ioapic[10]=00:14.0
@@ -2312,7 +2338,13 @@
 			Provide an override to the HPET-ID<->DEVICE-ID
 			mapping provided in the IVRS ACPI table.
 			By default, PCI segment is 0, and can be omitted.
-			For example:
+
+			For example, to map HPET-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_hpet=10@0001:00:14.0
+
+			Deprecated formats:
 			* To map HPET-ID decimal 0 to PCI device 00:14.0
 			  write the parameter as:
 				ivrs_hpet[0]=00:14.0
@@ -2323,15 +2355,20 @@
 	ivrs_acpihid	[HW,X86-64]
 			Provide an override to the ACPI-HID:UID<->DEVICE-ID
 			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
 
 			For example, to map UART-HID:UID AMD0020:0 to
 			PCI segment 0x1 and PCI device ID 00:14.5,
 			write the parameter as:
-				ivrs_acpihid[0001:00:14.5]=AMD0020:0
+				ivrs_acpihid=AMD0020:0@0001:00:14.5
 
-			By default, PCI segment is 0, and can be omitted.
-			For example, PCI device 00:14.5 write the parameter as:
+			Deprecated formats:
+			* To map UART-HID:UID AMD0020:0 to PCI segment is 0,
+			  PCI device ID 00:14.5, write the parameter as:
 				ivrs_acpihid[00:14.5]=AMD0020:0
+			* To map UART-HID:UID AMD0020:0 to PCI segment 0x1 and
+			  PCI device ID 00:14.5, write the parameter as:
+				ivrs_acpihid[0001:00:14.5]=AMD0020:0
 
 	js=		[HW,JOY] Analog joystick
 			See Documentation/input/joydev/joystick.rst.
@@ -3211,24 +3248,25 @@
 				Disable all optional CPU mitigations.  This
 				improves system performance, but it may also
 				expose users to several CPU vulnerabilities.
-				Equivalent to: nopti [X86,PPC]
-					       if nokaslr then kpti=0 [ARM64]
-					       nospectre_v1 [X86,PPC]
-					       nobp=0 [S390]
-					       nospectre_v2 [X86,PPC,S390,ARM64]
-					       spectre_v2_user=off [X86]
-					       spec_store_bypass_disable=off [X86,PPC]
-					       ssbd=force-off [ARM64]
-					       nospectre_bhb [ARM64]
+				Equivalent to: if nokaslr then kpti=0 [ARM64]
+					       gather_data_sampling=off [X86]
+					       kvm.nx_huge_pages=off [X86]
 					       l1tf=off [X86]
 					       mds=off [X86]
-					       tsx_async_abort=off [X86]
-					       kvm.nx_huge_pages=off [X86]
-					       srbds=off [X86,INTEL]
+					       mmio_stale_data=off [X86]
 					       no_entry_flush [PPC]
 					       no_uaccess_flush [PPC]
-					       mmio_stale_data=off [X86]
+					       nobp=0 [S390]
+					       nopti [X86,PPC]
+					       nospectre_bhb [ARM64]
+					       nospectre_v1 [X86,PPC]
+					       nospectre_v2 [X86,PPC,S390,ARM64]
 					       retbleed=off [X86]
+					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_v2_user=off [X86]
+					       srbds=off [X86,INTEL]
+					       ssbd=force-off [ARM64]
+					       tsx_async_abort=off [X86]
 
 				Exceptions:
 					       This does not have any effect on
@@ -5747,6 +5785,17 @@
 			Not specifying this option is equivalent to
 			spectre_v2_user=auto.
 
+	spec_rstack_overflow=
+			[X86] Control RAS overflow mitigation on AMD Zen CPUs
+
+			off		- Disable mitigation
+			microcode	- Enable microcode mitigation only
+			safe-ret	- Enable sw-only safe RET mitigation (default)
+			ibpb		- Enable mitigation by issuing IBPB on
+					  kernel entry
+			ibpb-vmexit	- Issue IBPB only on VMEXIT
+					  (cloud-specific mitigation)
+
 	spec_store_bypass_disable=
 			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
 			(Speculative Store Bypass vulnerability)
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst linux-libre-6.1.44-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
index 294ebbdb22af..bbe66480ff85 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
+++ linux-libre-6.1.44-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
@@ -15,10 +15,10 @@ HiSilicon PCIe PMU driver
 The PCIe PMU driver registers a perf PMU with the name of its sicl-id and PCIe
 Core id.::
 
-  /sys/bus/event_source/hisi_pcie<sicl>_<core>
+  /sys/bus/event_source/hisi_pcie<sicl>_core<core>
 
 PMU driver provides description of available events and filter options in sysfs,
-see /sys/bus/event_source/devices/hisi_pcie<sicl>_<core>.
+see /sys/bus/event_source/devices/hisi_pcie<sicl>_core<core>.
 
 The "format" directory describes all formats of the config (events) and config1
 (filter options) fields of the perf_event_attr structure. The "events" directory
@@ -33,13 +33,13 @@ monitored by PMU.
 Example usage of perf::
 
   $# perf list
-  hisi_pcie0_0/rx_mwr_latency/ [kernel PMU event]
-  hisi_pcie0_0/rx_mwr_cnt/ [kernel PMU event]
+  hisi_pcie0_core0/rx_mwr_latency/ [kernel PMU event]
+  hisi_pcie0_core0/rx_mwr_cnt/ [kernel PMU event]
   ------------------------------------------
 
-  $# perf stat -e hisi_pcie0_0/rx_mwr_latency/
-  $# perf stat -e hisi_pcie0_0/rx_mwr_cnt/
-  $# perf stat -g -e hisi_pcie0_0/rx_mwr_latency/ -e hisi_pcie0_0/rx_mwr_cnt/
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_latency/
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_cnt/
+  $# perf stat -g -e hisi_pcie0_core0/rx_mwr_latency/ -e hisi_pcie0_core0/rx_mwr_cnt/
 
 The current driver does not support sampling. So "perf record" is unsupported.
 Also attach to a task is unsupported for PCIe PMU.
@@ -64,7 +64,7 @@ bit8 is set, port=0x100; if these two Root Ports are both monitored, port=0x101.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mwr_latency,port=0x1/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0x1/ sleep 5
 
 -bdf
 
@@ -76,7 +76,7 @@ For example, "bdf=0x3900" means BDF of target Endpoint is 0000:39:00.0.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mrd_flux,bdf=0x3900/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,bdf=0x3900/ sleep 5
 
 2. Trigger filter
 Event statistics start when the first time TLP length is greater/smaller
@@ -90,7 +90,7 @@ means start when TLP length < condition.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5
 
 3. Threshold filter
 Counter counts when TLP length within the specified range. You can set the
@@ -103,4 +103,4 @@ when TLP length < threshold.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/security-bugs.rst linux-libre-6.1.44-gnu/Documentation/admin-guide/security-bugs.rst
index 82e29837d589..5a6993795bd2 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/security-bugs.rst
+++ linux-libre-6.1.44-gnu/Documentation/admin-guide/security-bugs.rst
@@ -63,31 +63,28 @@ information submitted to the security list and any followup discussions
 of the report are treated confidentially even after the embargo has been
 lifted, in perpetuity.
 
-Coordination
-------------
-
-Fixes for sensitive bugs, such as those that might lead to privilege
-escalations, may need to be coordinated with the private
-<linux-distros@vs.openwall.org> mailing list so that distribution vendors
-are well prepared to issue a fixed kernel upon public disclosure of the
-upstream fix. Distros will need some time to test the proposed patch and
-will generally request at least a few days of embargo, and vendor update
-publication prefers to happen Tuesday through Thursday. When appropriate,
-the security team can assist with this coordination, or the reporter can
-include linux-distros from the start. In this case, remember to prefix
-the email Subject line with "[vs]" as described in the linux-distros wiki:
-<http://oss-security.openwall.org/wiki/mailing-lists/distros#how-to-use-the-lists>
+Coordination with other groups
+------------------------------
+
+The kernel security team strongly recommends that reporters of potential
+security issues NEVER contact the "linux-distros" mailing list until
+AFTER discussing it with the kernel security team.  Do not Cc: both
+lists at once.  You may contact the linux-distros mailing list after a
+fix has been agreed on and you fully understand the requirements that
+doing so will impose on you and the kernel community.
+
+The different lists have different goals and the linux-distros rules do
+not contribute to actually fixing any potential security problems.
 
 CVE assignment
 --------------
 
-The security team does not normally assign CVEs, nor do we require them
-for reports or fixes, as this can needlessly complicate the process and
-may delay the bug handling. If a reporter wishes to have a CVE identifier
-assigned ahead of public disclosure, they will need to contact the private
-linux-distros list, described above. When such a CVE identifier is known
-before a patch is provided, it is desirable to mention it in the commit
-message if the reporter agrees.
+The security team does not assign CVEs, nor do we require them for
+reports or fixes, as this can needlessly complicate the process and may
+delay the bug handling.  If a reporter wishes to have a CVE identifier
+assigned, they should find one by themselves, for example by contacting
+MITRE directly.  However under no circumstances will a patch inclusion
+be delayed to wait for a CVE identifier to arrive.
 
 Non-disclosure agreements
 -------------------------
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/sysctl/kernel.rst linux-libre-6.1.44-gnu/Documentation/admin-guide/sysctl/kernel.rst
index 98d1b198b2b4..b3588fff1ec0 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-6.1.44-gnu/Documentation/admin-guide/sysctl/kernel.rst
@@ -667,6 +667,15 @@ This is the default behavior.
 an oops event is detected.
 
 
+oops_limit
+==========
+
+Number of kernel oopses after which the kernel should panic when
+``panic_on_oops`` is not set. Setting this to 0 disables checking
+the count. Setting this to  1 has the same effect as setting
+``panic_on_oops=1``. The default value is 10000.
+
+
 osrelease, ostype & version
 ===========================
 
@@ -1314,6 +1323,29 @@ watchdog work to be queued by the watchdog timer function, otherwise the NMI
 watchdog — if enabled — can detect a hard lockup condition.
 
 
+split_lock_mitigate (x86 only)
+==============================
+
+On x86, each "split lock" imposes a system-wide performance penalty. On larger
+systems, large numbers of split locks from unprivileged users can result in
+denials of service to well-behaved and potentially more important users.
+
+The kernel mitigates these bad users by detecting split locks and imposing
+penalties: forcing them to wait and only allowing one core to execute split
+locks at a time.
+
+These mitigations can make those bad applications unbearably slow. Setting
+split_lock_mitigate=0 may restore some application performance, but will also
+increase system exposure to denial of service attacks from split lock users.
+
+= ===================================================================
+0 Disable the mitigation mode - just warns the split lock on kernel log
+  and exposes the system to denials of service from the split lockers.
+1 Enable the mitigation mode (this is the default) - penalizes the split
+  lockers with intentional performance degradation.
+= ===================================================================
+
+
 stack_erasing
 =============
 
@@ -1500,6 +1532,16 @@ entry will default to 2 instead of 0.
 2 Unprivileged calls to ``bpf()`` are disabled
 = =============================================================
 
+
+warn_limit
+==========
+
+Number of kernel warnings after which the kernel should panic when
+``panic_on_warn`` is not set. Setting this to 0 disables checking
+the warning count. Setting this to 1 has the same effect as setting
+``panic_on_warn=1``. The default value is 0.
+
+
 watchdog
 ========
 
diff --git linux-libre-6.1-gnu/Documentation/arm64/silicon-errata.rst linux-libre-6.1.44-gnu/Documentation/arm64/silicon-errata.rst
index 808ade4cc008..bbc80eff03f9 100644
--- linux-libre-6.1-gnu/Documentation/arm64/silicon-errata.rst
+++ linux-libre-6.1.44-gnu/Documentation/arm64/silicon-errata.rst
@@ -52,6 +52,9 @@ stable kernels.
 | Allwinner      | A64/R18         | UNKNOWN1        | SUN50I_ERRATUM_UNKNOWN1     |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
+| Ampere         | AmpereOne       | AC03_CPU_38     | AMPERE_ERRATUM_AC03_CPU_38  |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2064142        | ARM64_ERRATUM_2064142       |
@@ -170,6 +173,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | NVIDIA         | Carmel Core     | N/A             | NVIDIA_CARMEL_CNP_ERRATUM   |
 +----------------+-----------------+-----------------+-----------------------------+
+| NVIDIA         | T241 GICv3/4.x  | T241-FABRIC-4   | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Freescale/NXP  | LS2080A/LS1043A | A-008585        | FSL_ERRATUM_A008585         |
 +----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-6.1-gnu/Documentation/block/inline-encryption.rst linux-libre-6.1.44-gnu/Documentation/block/inline-encryption.rst
index 4d151fbe2058..f9bf18ea6509 100644
--- linux-libre-6.1-gnu/Documentation/block/inline-encryption.rst
+++ linux-libre-6.1.44-gnu/Documentation/block/inline-encryption.rst
@@ -142,7 +142,7 @@ Therefore, we also introduce *blk-crypto-fallback*, which is an implementation
 of inline encryption using the kernel crypto API.  blk-crypto-fallback is built
 into the block layer, so it works on any block device without any special setup.
 Essentially, when a bio with an encryption context is submitted to a
-request_queue that doesn't support that encryption context, the block layer will
+block_device that doesn't support that encryption context, the block layer will
 handle en/decryption of the bio using blk-crypto-fallback.
 
 For encryption, the data cannot be encrypted in-place, as callers usually rely
@@ -187,7 +187,7 @@ API presented to users of the block layer
 
 ``blk_crypto_config_supported()`` allows users to check ahead of time whether
 inline encryption with particular crypto settings will work on a particular
-request_queue -- either via hardware or via blk-crypto-fallback.  This function
+block_device -- either via hardware or via blk-crypto-fallback.  This function
 takes in a ``struct blk_crypto_config`` which is like blk_crypto_key, but omits
 the actual bytes of the key and instead just contains the algorithm, data unit
 size, etc.  This function can be useful if blk-crypto-fallback is disabled.
@@ -195,7 +195,7 @@ size, etc.  This function can be useful if blk-crypto-fallback is disabled.
 ``blk_crypto_init_key()`` allows users to initialize a blk_crypto_key.
 
 Users must call ``blk_crypto_start_using_key()`` before actually starting to use
-a blk_crypto_key on a request_queue (even if ``blk_crypto_config_supported()``
+a blk_crypto_key on a block_device (even if ``blk_crypto_config_supported()``
 was called earlier).  This is needed to initialize blk-crypto-fallback if it
 will be needed.  This must not be called from the data path, as this may have to
 allocate resources, which may deadlock in that case.
@@ -207,7 +207,7 @@ for en/decryption.  Users don't need to worry about freeing the bio_crypt_ctx
 later, as that happens automatically when the bio is freed or reset.
 
 Finally, when done using inline encryption with a blk_crypto_key on a
-request_queue, users must call ``blk_crypto_evict_key()``.  This ensures that
+block_device, users must call ``blk_crypto_evict_key()``.  This ensures that
 the key is evicted from all keyslots it may be programmed into and unlinked from
 any kernel data structures it may be linked into.
 
@@ -221,9 +221,9 @@ as follows:
 5. ``blk_crypto_evict_key()`` (after all I/O has completed)
 6. Zeroize the blk_crypto_key (this has no dedicated function)
 
-If a blk_crypto_key is being used on multiple request_queues, then
+If a blk_crypto_key is being used on multiple block_devices, then
 ``blk_crypto_config_supported()`` (if used), ``blk_crypto_start_using_key()``,
-and ``blk_crypto_evict_key()`` must be called on each request_queue.
+and ``blk_crypto_evict_key()`` must be called on each block_device.
 
 API presented to device drivers
 ===============================
diff --git linux-libre-6.1-gnu/Documentation/bpf/instruction-set.rst linux-libre-6.1.44-gnu/Documentation/bpf/instruction-set.rst
index 5d798437dad4..3ba6475cfbfc 100644
--- linux-libre-6.1-gnu/Documentation/bpf/instruction-set.rst
+++ linux-libre-6.1.44-gnu/Documentation/bpf/instruction-set.rst
@@ -99,19 +99,26 @@ code      value  description
 BPF_ADD   0x00   dst += src
 BPF_SUB   0x10   dst -= src
 BPF_MUL   0x20   dst \*= src
-BPF_DIV   0x30   dst /= src
+BPF_DIV   0x30   dst = (src != 0) ? (dst / src) : 0
 BPF_OR    0x40   dst \|= src
 BPF_AND   0x50   dst &= src
 BPF_LSH   0x60   dst <<= src
 BPF_RSH   0x70   dst >>= src
 BPF_NEG   0x80   dst = ~src
-BPF_MOD   0x90   dst %= src
+BPF_MOD   0x90   dst = (src != 0) ? (dst % src) : dst
 BPF_XOR   0xa0   dst ^= src
 BPF_MOV   0xb0   dst = src
 BPF_ARSH  0xc0   sign extending shift right
 BPF_END   0xd0   byte swap operations (see `Byte swap instructions`_ below)
 ========  =====  ==========================================================
 
+Underflow and overflow are allowed during arithmetic operations, meaning
+the 64-bit or 32-bit value will wrap. If eBPF program execution would
+result in division by zero, the destination register is instead set to zero.
+If execution would result in modulo by zero, for ``BPF_ALU64`` the value of
+the destination register is unchanged whereas for ``BPF_ALU`` the upper
+32 bits of the destination register are zeroed.
+
 ``BPF_ADD | BPF_X | BPF_ALU`` means::
 
   dst_reg = (u32) dst_reg + (u32) src_reg;
@@ -128,6 +135,11 @@ BPF_END   0xd0   byte swap operations (see `Byte swap instructions`_ below)
 
   src_reg = src_reg ^ imm32
 
+Also note that the division and modulo operations are unsigned. Thus, for
+``BPF_ALU``, 'imm' is first interpreted as an unsigned 32-bit value, whereas
+for ``BPF_ALU64``, 'imm' is first sign extended to 64 bits and the result
+interpreted as an unsigned 64-bit value. There are no instructions for
+signed division or modulo.
 
 Byte swap instructions
 ~~~~~~~~~~~~~~~~~~~~~~
diff --git linux-libre-6.1-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst linux-libre-6.1.44-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
index 8e0f1fe8d17a..895285c037c7 100644
--- linux-libre-6.1-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
+++ linux-libre-6.1.44-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
@@ -39,6 +39,10 @@ Setup
   this mode. In this case, you should build the kernel with
   CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR.
 
+- Build the gdb scripts (required on kernels v5.1 and above)::
+
+    make scripts_gdb
+
 - Enable the gdb stub of QEMU/KVM, either
 
     - at VM startup time by appending "-s" to the QEMU command line
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
index 9b31f864e071..71364c6081ff 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
@@ -32,7 +32,7 @@ properties:
     maxItems: 1
 
   iommus:
-    maxItems: 1
+    maxItems: 4
 
   power-domains:
     maxItems: 1
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
index 63fb02014a56..117e3db43f84 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
@@ -32,7 +32,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8186-disp-ccorr
-          - const: mediatek,mt8183-disp-ccorr
+          - const: mediatek,mt8192-disp-ccorr
 
   reg:
     maxItems: 1
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 3b609c19e0bc..2fa1759e74d9 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -32,7 +32,7 @@ properties:
       - description: Display byte clock
       - description: Display byte interface clock
       - description: Display pixel clock
-      - description: Display escape clock
+      - description: Display core clock
       - description: Display AHB clock
       - description: Display AXI clock
 
@@ -65,6 +65,18 @@ properties:
       Indicates if the DSI controller is driving a panel which needs
       2 DSI links.
 
+  qcom,master-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller is the master DSI controller when
+      qcom,dual-dsi-mode enabled.
+
+  qcom,sync-dual-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller needs to sync the other DSI controller
+      with MIPI DCS commands when qcom,dual-dsi-mode enabled.
+
   assigned-clocks:
     maxItems: 2
     description: |
@@ -134,8 +146,6 @@ required:
   - phy-names
   - assigned-clocks
   - assigned-clock-parents
-  - power-domains
-  - operating-points-v2
   - ports
 
 additionalProperties: false
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
index d9ad8b659f58..3ec466c3ab38 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -69,7 +69,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vdds-supply
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index 1342d74ecfe0..0a7b5f110d88 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -38,7 +38,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vcca-supply
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index 3d8540a06fe2..2f1fd140c87d 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -34,6 +34,10 @@ properties:
   vddio-supply:
     description: Phandle to vdd-io regulator device node.
 
+  qcom,dsi-phy-regulator-ldo-mode:
+    type: boolean
+    description: Indicates if the LDO mode PHY regulator is wanted.
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
index c46378efc123..92e899905ef8 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
@@ -16,7 +16,7 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,i2c-r9a09g011  # RZ/V2M
+          - renesas,r9a09g011-i2c  # RZ/V2M
       - const: renesas,rzv2m-i2c
 
   reg:
@@ -66,7 +66,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     i2c0: i2c@a4030000 {
-        compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+        compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
         reg = <0xa4030000 0x80>;
         interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
                      <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
index c115e2e99bd9..4a7b1385fdc7 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
@@ -86,7 +86,7 @@ patternProperties:
             of the MAX chips to the GyroADC, while MISO line of each Maxim
             ADC connects to a shared input pin of the GyroADC.
         enum:
-          - adi,7476
+          - adi,ad7476
           - fujitsu,mb88101a
           - maxim,max1162
           - maxim,max11100
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
index 02e605fac408..9ddba7f2e7aa 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
@@ -473,9 +473,6 @@ patternProperties:
               Specifies whether the event is to be interpreted as a key (1)
               or a switch (5).
 
-        required:
-          - linux,code
-
         additionalProperties: false
 
     dependencies:
@@ -501,7 +498,7 @@ patternProperties:
 
       azoteq,slider-size:
         $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 0
+        minimum: 1
         maximum: 65535
         description:
           Specifies the slider's one-dimensional resolution, equal to the
@@ -575,9 +572,9 @@ patternProperties:
           linux,code: true
 
           azoteq,gesture-max-ms:
-            multipleOf: 4
+            multipleOf: 16
             minimum: 0
-            maximum: 1020
+            maximum: 4080
             description:
               Specifies the length of time (in ms) within which a tap, swipe
               or flick gesture must be completed in order to be acknowledged
@@ -585,9 +582,9 @@ patternProperties:
               gesture applies to all remaining swipe or flick gestures.
 
           azoteq,gesture-min-ms:
-            multipleOf: 4
+            multipleOf: 16
             minimum: 0
-            maximum: 124
+            maximum: 496
             description:
               Specifies the length of time (in ms) for which a tap gesture must
               be held in order to be acknowledged by the device.
@@ -620,9 +617,6 @@ patternProperties:
               GPIO, they must all be of the same type (proximity, touch or
               slider gesture).
 
-        required:
-          - linux,code
-
         additionalProperties: false
 
     required:
@@ -693,6 +687,7 @@ allOf:
           properties:
             azoteq,slider-size:
               multipleOf: 16
+              minimum: 16
               maximum: 4080
 
             azoteq,top-speed:
@@ -935,14 +930,14 @@ examples:
 
                             event-tap {
                                     linux,code = <KEY_PLAYPAUSE>;
-                                    azoteq,gesture-max-ms = <600>;
-                                    azoteq,gesture-min-ms = <24>;
+                                    azoteq,gesture-max-ms = <400>;
+                                    azoteq,gesture-min-ms = <32>;
                             };
 
                             event-flick-pos {
                                     linux,code = <KEY_NEXTSONG>;
-                                    azoteq,gesture-max-ms = <600>;
-                                    azoteq,gesture-dist = <816>;
+                                    azoteq,gesture-max-ms = <800>;
+                                    azoteq,gesture-dist = <800>;
                             };
 
                             event-flick-neg {
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index 6a3e3ede1ede..777f2da52f1e 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -98,6 +98,10 @@ properties:
     type: object
     $ref: /schemas/regulator/qcom,spmi-regulator.yaml#
 
+  pwm:
+    type: object
+    $ref: /schemas/leds/leds-qcom-lpg.yaml#
+
 patternProperties:
   "^adc@[0-9a-f]+$":
     type: object
@@ -123,10 +127,6 @@ patternProperties:
     type: object
     $ref: /schemas/power/reset/qcom,pon.yaml#
 
-  "pwm@[0-9a-f]+$":
-    type: object
-    $ref: /schemas/leds/leds-qcom-lpg.yaml#
-
   "^rtc@[0-9a-f]+$":
     type: object
     $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml#
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index 7149784a36ac..3ee77af5a74c 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -84,6 +84,13 @@ patternProperties:
   "^otp(-[0-9]+)?$":
     type: object
 
+  spi-cpol: true
+  spi-cpha: true
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 376e739bcad4..49b4f7a32e71 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -14,9 +14,6 @@ description: |+
   This PCIe host controller is based on the Synopsys DesignWare PCIe IP
   and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
-allOf:
-  - $ref: /schemas/pci/snps,dw-pcie.yaml#
-
 properties:
   compatible:
     enum:
@@ -61,7 +58,7 @@ properties:
       - const: pcie
       - const: pcie_bus
       - const: pcie_phy
-      - const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie
+      - enum: [ pcie_inbound_axi, pcie_aux ]
 
   num-lanes:
     const: 1
@@ -175,6 +172,47 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx6sx-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - {}
+            - const: pcie_inbound_axi
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - {}
+            - const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx8mq-pcie
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 48ed227fc5b9..53da2edd7c9a 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -36,7 +36,7 @@ properties:
       - const: mpu
 
   interrupts:
-    maxItems: 1
+    maxItems: 2
 
   clocks:
     items:
@@ -94,8 +94,9 @@ examples:
             #interrupt-cells = <1>;
             ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
                      <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
-            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "intr";
+            interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi", "intr";
             interrupt-map-mask = <0 0 0 7>;
             interrupt-map =
                 <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
similarity index 85%
rename from Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
rename to Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
index f3a5fbabbbb5..bb01c6b34dab 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb2-phy.yaml#"
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb2-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Amlogic G12A USB2 PHY
@@ -13,8 +13,8 @@ maintainers:
 properties:
   compatible:
     enum:
-      - amlogic,meson-g12a-usb2-phy
-      - amlogic,meson-a1-usb2-phy
+      - amlogic,g12a-usb2-phy
+      - amlogic,a1-usb2-phy
 
   reg:
     maxItems: 1
@@ -68,7 +68,7 @@ additionalProperties: false
 examples:
   - |
     phy@36000 {
-          compatible = "amlogic,meson-g12a-usb2-phy";
+          compatible = "amlogic,g12a-usb2-phy";
           reg = <0x36000 0x2000>;
           clocks = <&xtal>;
           clock-names = "xtal";
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
similarity index 82%
rename from Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
rename to Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
index 868b4e6fde71..129d26e99776 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml#"
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb3-pcie-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Amlogic G12A USB3 + PCIE Combo PHY
@@ -13,7 +13,7 @@ maintainers:
 properties:
   compatible:
     enum:
-      - amlogic,meson-g12a-usb3-pcie-phy
+      - amlogic,g12a-usb3-pcie-phy
 
   reg:
     maxItems: 1
@@ -49,7 +49,7 @@ additionalProperties: false
 examples:
   - |
     phy@46000 {
-          compatible = "amlogic,meson-g12a-usb3-pcie-phy";
+          compatible = "amlogic,g12a-usb3-pcie-phy";
           reg = <0x46000 0x2000>;
           clocks = <&ref_clk>;
           clock-names = "ref_clk";
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
index 89b8f3dd67a1..3342847dcb19 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -87,6 +87,8 @@ patternProperties:
           "wifi_led"        "led"       1, 2
           "i2c"             "i2c"       3, 4
           "uart1_0"         "uart"      7, 8, 9, 10
+          "uart1_rx_tx"     "uart"      42, 43
+          "uart1_cts_rts"   "uart"      44, 45
           "pcie_clk"        "pcie"      9
           "pcie_wake"       "pcie"      10
           "spi1_0"          "spi"       11, 12, 13, 14
@@ -98,9 +100,11 @@ patternProperties:
           "emmc_45"         "emmc"      22, 23, 24, 25, 26, 27, 28, 29, 30,
                                         31, 32
           "spi1_1"          "spi"       23, 24, 25, 26
-          "uart1_2"         "uart"      29, 30, 31, 32
+          "uart1_2_rx_tx"   "uart"      29, 30
+          "uart1_2_cts_rts" "uart"      31, 32
           "uart1_1"         "uart"      23, 24, 25, 26
-          "uart2_0"         "uart"      29, 30, 31, 32
+          "uart2_0_rx_tx"   "uart"      29, 30
+          "uart2_0_cts_rts" "uart"      31, 32
           "spi0"            "spi"       33, 34, 35, 36
           "spi0_wp_hold"    "spi"       37, 38
           "uart1_3_rx_tx"   "uart"      35, 36
@@ -157,7 +161,7 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [emmc, emmc_rst]
+                  enum: [emmc_45, emmc_51]
           - if:
               properties:
                 function:
@@ -221,8 +225,12 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx,
-                         uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2]
+                  items:
+                    enum: [uart1_0, uart1_rx_tx, uart1_cts_rts, uart1_1,
+                           uart1_2_rx_tx, uart1_2_cts_rts, uart1_3_rx_tx,
+                           uart1_3_cts_rts, uart2_0_rx_tx, uart2_0_cts_rts,
+                           uart2_1, uart0, uart1, uart2]
+                  maxItems: 2
           - if:
               properties:
                 function:
@@ -356,6 +364,27 @@ examples:
         interrupt-parent = <&gic>;
         #interrupt-cells = <2>;
 
+        pcie_pins: pcie-pins {
+          mux {
+            function = "pcie";
+            groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+          };
+        };
+
+        pwm_pins: pwm-pins {
+          mux {
+            function = "pwm";
+            groups = "pwm0", "pwm1_0";
+          };
+        };
+
+        spi0_pins: spi0-pins {
+          mux {
+            function = "spi";
+            groups = "spi0", "spi0_wp_hold";
+          };
+        };
+
         uart1_pins: uart1-pins {
           mux {
             function = "uart";
@@ -363,6 +392,13 @@ examples:
           };
         };
 
+        uart1_3_pins: uart1-3-pins {
+          mux {
+            function = "uart";
+            groups = "uart1_3_rx_tx", "uart1_3_cts_rts";
+          };
+        };
+
         uart2_pins: uart2-pins {
           mux {
             function = "uart";
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
index d96170eecbd2..0b1eca734d3b 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -56,7 +56,6 @@ required:
 unevaluatedProperties: false
 
 allOf:
-  - $ref: reboot-mode.yaml#
   - if:
       properties:
         compatible:
@@ -66,6 +65,9 @@ allOf:
               - qcom,pms405-pon
               - qcom,pm8998-pon
     then:
+      allOf:
+        - $ref: reboot-mode.yaml#
+
       properties:
         reg:
           maxItems: 1
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
index a7fae1772a81..cd8e9a8907f8 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
@@ -30,7 +30,9 @@ properties:
     maxItems: 1
 
   "#pwm-cells":
-    const: 2
+    enum: [2, 3]
+    description:
+      The only flag supported by the controller is PWM_POLARITY_INVERTED.
 
   microchip,sync-update-mask:
     description: |
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
index 01f9d4e236e9..a7feb497eb89 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
@@ -19,8 +19,8 @@ description: |
   additional information and example.
 
 patternProperties:
-  # 25 LDOs
-  "^LDO([1-9]|[1][0-9]|2[0-5])$":
+  # 25 LDOs, without LDO10-12
+  "^LDO([1-9]|1[3-9]|2[0-5])$":
     type: object
     $ref: regulator.yaml#
     unevaluatedProperties: false
@@ -30,6 +30,23 @@ patternProperties:
     required:
       - regulator-name
 
+  "^LDO(1[0-2])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      samsung,ext-control-gpios:
+        maxItems: 1
+        description:
+          LDO10, LDO11 and LDO12 can be configured to external control over
+          GPIO.
+
+    required:
+      - regulator-name
+
   # 5 bucks
   "^BUCK[1-5]$":
     type: object
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
index 90a7cabf58fe..d4148418350c 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -80,7 +80,7 @@ properties:
       insensitive, letters in the riscv,isa string must be all
       lowercase to simplify parsing.
     $ref: "/schemas/types.yaml#/definitions/string"
-    pattern: ^rv(?:64|32)imaf?d?q?c?b?v?k?h?(?:_[hsxz](?:[a-z])+)*$
+    pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$
 
   # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
   timebase-frequency: false
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index f930e7f1349f..52c094873863 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -91,7 +91,7 @@ properties:
           - description: Error interrupt
           - description: Receive buffer full interrupt
           - description: Transmit buffer empty interrupt
-          - description: Transmit End interrupt
+          - description: Break interrupt
       - items:
           - description: Error interrupt
           - description: Receive buffer full interrupt
@@ -106,7 +106,7 @@ properties:
           - const: eri
           - const: rxi
           - const: txi
-          - const: tei
+          - const: bri
       - items:
           - const: eri
           - const: rxi
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
index 5b8d59245f82..b358fd601ed3 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -62,7 +62,7 @@ patternProperties:
         description: phandle of the CPU DAI
 
     patternProperties:
-      "^codec-[0-9]+$":
+      "^codec(-[0-9]+)?$":
         type: object
         additionalProperties: false
         description: |-
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/everest,es8326.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/everest,es8326.yaml
old mode 100755
new mode 100644
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
index 1de11e7f33bb..c8d803097d81 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
@@ -27,6 +27,7 @@ properties:
     const: 0
 
   clocks:
+    minItems: 3
     maxItems: 5
 
   clock-names:
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
index 5d6ea66a863f..1f75feec3dec 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
@@ -109,7 +109,7 @@ audio-codec@1{
 	reg  = <1 0>;
 	interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
 	interrupt-names = "intr2"
-	reset-gpios = <&msmgpio 64 0>;
+	reset-gpios = <&msmgpio 64 GPIO_ACTIVE_LOW>;
 	slim-ifc-dev  = <&wc9335_ifd>;
 	clock-names = "mclk", "native";
 	clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/rt5682.txt linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/rt5682.txt
index c5f2b8febcee..6b87db68337c 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/rt5682.txt
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -46,7 +46,7 @@ Optional properties:
 
 - realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
 
-- #sound-dai-cells: Should be set to '<0>'.
+- #sound-dai-cells: Should be set to '<1>'.
 
 Pins on the device (for linking into audio routes) for RT5682:
 
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
index 30f6b029ac08..cb519a4b6e71 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -52,7 +52,9 @@ properties:
     description: TDM TX current sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -69,7 +71,7 @@ examples:
      codec: codec@4c {
        compatible = "ti,tas2562";
        reg = <0x4c>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        shutdown-gpios = <&gpio1 15 0>;
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml
index bc90e72bf7cf..1859fbe1cdf1 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -54,7 +54,9 @@ properties:
       - 1 # Falling edge
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -71,7 +73,7 @@ examples:
      codec: codec@41 {
        compatible = "ti,tas2770";
        reg = <0x41>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpio = <&gpio1 15 0>;
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/tas27xx.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/tas27xx.yaml
index 66a0df8850ea..079cb6f8d447 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/tas27xx.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/sound/tas27xx.yaml
@@ -47,7 +47,9 @@ properties:
     description: TDM TX voltage sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -64,7 +66,7 @@ examples:
      codec: codec@38 {
        compatible = "ti,tas2764";
        reg = <0x38>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpios = <&gpio1 15 0>;
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
index dc9d6ed0781d..5d0bfea2c087 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -64,7 +64,7 @@ properties:
     description:
       size of memory intended as internal memory for endpoints
       buffers expressed in KB
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint16
 
   cdns,phyrst-a-enable:
     description: Enable resetting of PHY if Rx fail is detected
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 6d78048c4613..045fc7a28c45 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ linux-libre-6.1.44-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -260,7 +260,7 @@ properties:
     description:
       High-Speed PHY interface selection between UTMI+ and ULPI when the
       DWC_USB3_HSPHY_INTERFACE has value 3.
-    $ref: /schemas/types.yaml#/definitions/uint8
+    $ref: /schemas/types.yaml#/definitions/string
     enum: [utmi, ulpi]
 
   snps,quirk-frame-length-adjustment:
diff --git linux-libre-6.1-gnu/Documentation/driver-api/spi.rst linux-libre-6.1.44-gnu/Documentation/driver-api/spi.rst
index f64cb666498a..f28887045049 100644
--- linux-libre-6.1-gnu/Documentation/driver-api/spi.rst
+++ linux-libre-6.1.44-gnu/Documentation/driver-api/spi.rst
@@ -25,8 +25,8 @@ hardware, which may be as simple as a set of GPIO pins or as complex as
 a pair of FIFOs connected to dual DMA engines on the other side of the
 SPI shift register (maximizing throughput). Such drivers bridge between
 whatever bus they sit on (often the platform bus) and SPI, and expose
-the SPI side of their device as a :c:type:`struct spi_master
-<spi_master>`. SPI devices are children of that master,
+the SPI side of their device as a :c:type:`struct spi_controller
+<spi_controller>`. SPI devices are children of that master,
 represented as a :c:type:`struct spi_device <spi_device>` and
 manufactured from :c:type:`struct spi_board_info
 <spi_board_info>` descriptors which are usually provided by
diff --git linux-libre-6.1-gnu/Documentation/fault-injection/fault-injection.rst linux-libre-6.1.44-gnu/Documentation/fault-injection/fault-injection.rst
index 17779a2772e5..5f6454b9dbd4 100644
--- linux-libre-6.1-gnu/Documentation/fault-injection/fault-injection.rst
+++ linux-libre-6.1.44-gnu/Documentation/fault-injection/fault-injection.rst
@@ -83,9 +83,7 @@ configuration of fault-injection capabilities.
 - /sys/kernel/debug/fail*/times:
 
 	specifies how many times failures may happen at most. A value of -1
-	means "no limit". Note, though, that this file only accepts unsigned
-	values. So, if you want to specify -1, you better use 'printf' instead
-	of 'echo', e.g.: $ printf %#x -1 > times
+	means "no limit".
 
 - /sys/kernel/debug/fail*/space:
 
@@ -284,7 +282,7 @@ Application Examples
     echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 10 > /sys/kernel/debug/$FAILTYPE/probability
     echo 100 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
     echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
@@ -338,7 +336,7 @@ Application Examples
     echo N > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 10 > /sys/kernel/debug/$FAILTYPE/probability
     echo 100 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
     echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
@@ -369,7 +367,7 @@ Application Examples
     echo N > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 100 > /sys/kernel/debug/$FAILTYPE/probability
     echo 0 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 1 > /sys/kernel/debug/$FAILTYPE/verbose
 
diff --git linux-libre-6.1-gnu/Documentation/fault-injection/provoke-crashes.rst linux-libre-6.1.44-gnu/Documentation/fault-injection/provoke-crashes.rst
index 3abe84225613..1f087e502ca6 100644
--- linux-libre-6.1-gnu/Documentation/fault-injection/provoke-crashes.rst
+++ linux-libre-6.1.44-gnu/Documentation/fault-injection/provoke-crashes.rst
@@ -29,7 +29,7 @@ recur_count
 cpoint_name
 	Where in the kernel to trigger the action. It can be
 	one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY,
-	FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_QUEUE_RQ, or DIRECT.
+	FS_SUBMIT_BH, MEM_SWAPOUT, TIMERADD, SCSI_QUEUE_RQ, or DIRECT.
 
 cpoint_type
 	Indicates the action to be taken on hitting the crash point.
diff --git linux-libre-6.1-gnu/Documentation/filesystems/autofs-mount-control.rst linux-libre-6.1.44-gnu/Documentation/filesystems/autofs-mount-control.rst
index bf4b511cdbe8..b5a379d25c40 100644
--- linux-libre-6.1-gnu/Documentation/filesystems/autofs-mount-control.rst
+++ linux-libre-6.1.44-gnu/Documentation/filesystems/autofs-mount-control.rst
@@ -196,7 +196,7 @@ information and return operation results::
 		    struct args_ismountpoint	ismountpoint;
 	    };
 
-	    char path[0];
+	    char path[];
     };
 
 The ioctlfd field is a mount point file descriptor of an autofs mount
diff --git linux-libre-6.1-gnu/Documentation/filesystems/autofs.rst linux-libre-6.1.44-gnu/Documentation/filesystems/autofs.rst
index 4f490278d22f..3b6e38e646cd 100644
--- linux-libre-6.1-gnu/Documentation/filesystems/autofs.rst
+++ linux-libre-6.1.44-gnu/Documentation/filesystems/autofs.rst
@@ -467,7 +467,7 @@ Each ioctl is passed a pointer to an `autofs_dev_ioctl` structure::
 			struct args_ismountpoint	ismountpoint;
 		};
 
-                char path[0];
+                char path[];
         };
 
 For the **OPEN_MOUNT** and **IS_MOUNTPOINT** commands, the target
diff --git linux-libre-6.1-gnu/Documentation/filesystems/directory-locking.rst linux-libre-6.1.44-gnu/Documentation/filesystems/directory-locking.rst
index 504ba940c36c..dccd61c7c5c3 100644
--- linux-libre-6.1-gnu/Documentation/filesystems/directory-locking.rst
+++ linux-libre-6.1.44-gnu/Documentation/filesystems/directory-locking.rst
@@ -22,12 +22,11 @@ exclusive.
 3) object removal.  Locking rules: caller locks parent, finds victim,
 locks victim and calls the method.  Locks are exclusive.
 
-4) rename() that is _not_ cross-directory.  Locking rules: caller locks
-the parent and finds source and target.  In case of exchange (with
-RENAME_EXCHANGE in flags argument) lock both.  In any case,
-if the target already exists, lock it.  If the source is a non-directory,
-lock it.  If we need to lock both, lock them in inode pointer order.
-Then call the method.  All locks are exclusive.
+4) rename() that is _not_ cross-directory.  Locking rules: caller locks the
+parent and finds source and target.  We lock both (provided they exist).  If we
+need to lock two inodes of different type (dir vs non-dir), we lock directory
+first.  If we need to lock two inodes of the same type, lock them in inode
+pointer order.  Then call the method.  All locks are exclusive.
 NB: we might get away with locking the source (and target in exchange
 case) shared.
 
@@ -44,15 +43,17 @@ All locks are exclusive.
 rules:
 
 	* lock the filesystem
-	* lock parents in "ancestors first" order.
+	* lock parents in "ancestors first" order. If one is not ancestor of
+	  the other, lock them in inode pointer order.
 	* find source and target.
 	* if old parent is equal to or is a descendent of target
 	  fail with -ENOTEMPTY
 	* if new parent is equal to or is a descendent of source
 	  fail with -ELOOP
-	* If it's an exchange, lock both the source and the target.
-	* If the target exists, lock it.  If the source is a non-directory,
-	  lock it.  If we need to lock both, do so in inode pointer order.
+	* Lock both the source and the target provided they exist. If we
+	  need to lock two inodes of different type (dir vs non-dir), we lock
+	  the directory first. If we need to lock two inodes of the same type,
+	  lock them in inode pointer order.
 	* call the method.
 
 All ->i_rwsem are taken exclusive.  Again, we might get away with locking
@@ -66,8 +67,9 @@ If no directory is its own ancestor, the scheme above is deadlock-free.
 
 Proof:
 
-	First of all, at any moment we have a partial ordering of the
-	objects - A < B iff A is an ancestor of B.
+	First of all, at any moment we have a linear ordering of the
+	objects - A < B iff (A is an ancestor of B) or (B is not an ancestor
+        of A and ptr(A) < ptr(B)).
 
 	That ordering can change.  However, the following is true:
 
diff --git linux-libre-6.1-gnu/Documentation/filesystems/mount_api.rst linux-libre-6.1.44-gnu/Documentation/filesystems/mount_api.rst
index eb358a00be27..1d16787a00e9 100644
--- linux-libre-6.1-gnu/Documentation/filesystems/mount_api.rst
+++ linux-libre-6.1.44-gnu/Documentation/filesystems/mount_api.rst
@@ -814,6 +814,7 @@ process the parameters it is given.
        int fs_lookup_param(struct fs_context *fc,
 			   struct fs_parameter *value,
 			   bool want_bdev,
+			   unsigned int flags,
 			   struct path *_path);
 
      This takes a parameter that carries a string or filename type and attempts
diff --git linux-libre-6.1-gnu/Documentation/filesystems/vfs.rst linux-libre-6.1.44-gnu/Documentation/filesystems/vfs.rst
index 2b55f71e2ae1..b5e8b8af8afb 100644
--- linux-libre-6.1-gnu/Documentation/filesystems/vfs.rst
+++ linux-libre-6.1.44-gnu/Documentation/filesystems/vfs.rst
@@ -1221,7 +1221,7 @@ defined:
 	return
 	-ECHILD and it will be called again in ref-walk mode.
 
-``_weak_revalidate``
+``d_weak_revalidate``
 	called when the VFS needs to revalidate a "jumped" dentry.  This
 	is called when a path-walk ends at dentry that was not acquired
 	by doing a lookup in the parent directory.  This includes "/",
diff --git linux-libre-6.1-gnu/Documentation/gpu/todo.rst linux-libre-6.1.44-gnu/Documentation/gpu/todo.rst
index 393d218e4a0c..b2c6aaf1edf2 100644
--- linux-libre-6.1-gnu/Documentation/gpu/todo.rst
+++ linux-libre-6.1.44-gnu/Documentation/gpu/todo.rst
@@ -651,17 +651,6 @@ See drivers/gpu/drm/amd/display/TODO for tasks.
 
 Contact: Harry Wentland, Alex Deucher
 
-vmwgfx: Replace hashtable with Linux' implementation
-----------------------------------------------------
-
-The vmwgfx driver uses its own hashtable implementation. Replace the
-code with Linux' implementation and update the callers. It's mostly a
-refactoring task, but the interfaces are different.
-
-Contact: Zack Rusin, Thomas Zimmermann <tzimmermann@suse.de>
-
-Level: Intermediate
-
 Bootsplash
 ==========
 
diff --git linux-libre-6.1-gnu/Documentation/hwmon/ftsteutates.rst linux-libre-6.1.44-gnu/Documentation/hwmon/ftsteutates.rst
index 58a2483d8d0d..198fa8e2819d 100644
--- linux-libre-6.1-gnu/Documentation/hwmon/ftsteutates.rst
+++ linux-libre-6.1.44-gnu/Documentation/hwmon/ftsteutates.rst
@@ -22,6 +22,10 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and
 8 fans. It also contains an integrated watchdog which is currently
 implemented in this driver.
 
+The 4 voltages require a board-specific multiplier, since the BMC can
+only measure voltages up to 3.3V and thus relies on voltage dividers.
+Consult your motherboard manual for details.
+
 To clear a temperature or fan alarm, execute the following command with the
 correct path to the alarm file::
 
diff --git linux-libre-6.1-gnu/Documentation/mm/page_table_check.rst linux-libre-6.1.44-gnu/Documentation/mm/page_table_check.rst
index 1a09472f10a3..d19ca356b7bf 100644
--- linux-libre-6.1-gnu/Documentation/mm/page_table_check.rst
+++ linux-libre-6.1.44-gnu/Documentation/mm/page_table_check.rst
@@ -54,3 +54,22 @@ Build kernel with:
 
 Optionally, build kernel with PAGE_TABLE_CHECK_ENFORCED in order to have page
 table support without extra kernel parameter.
+
+Implementation notes
+====================
+
+We specifically decided not to use VMA information in order to avoid relying on
+MM states (except for limited "struct page" info). The page table check is a
+separate from Linux-MM state machine that verifies that the user accessible
+pages are not falsely shared.
+
+PAGE_TABLE_CHECK depends on EXCLUSIVE_SYSTEM_RAM. The reason is that without
+EXCLUSIVE_SYSTEM_RAM, users are allowed to map arbitrary physical memory
+regions into the userspace via /dev/mem. At the same time, pages may change
+their properties (e.g., from anonymous pages to named pages) while they are
+still being mapped in the userspace, leading to "corruption" detected by the
+page table check.
+
+Even with EXCLUSIVE_SYSTEM_RAM, I/O pages may be still allowed to be mapped via
+/dev/mem. However, these pages are always considered as named pages, so they
+won't break the logic used in the page table check.
diff --git linux-libre-6.1-gnu/Documentation/mm/zsmalloc.rst linux-libre-6.1.44-gnu/Documentation/mm/zsmalloc.rst
index 6e79893d6132..d98607aa9c1f 100644
--- linux-libre-6.1-gnu/Documentation/mm/zsmalloc.rst
+++ linux-libre-6.1.44-gnu/Documentation/mm/zsmalloc.rst
@@ -68,6 +68,8 @@ pages_used
 	the number of pages allocated for the class
 pages_per_zspage
 	the number of 0-order pages to make a zspage
+freeable
+	the approximate number of pages class compaction can free
 
 We assign a zspage to ZS_ALMOST_EMPTY fullness group when n <= N / f, where
 
diff --git linux-libre-6.1-gnu/Documentation/networking/af_xdp.rst linux-libre-6.1.44-gnu/Documentation/networking/af_xdp.rst
index 60b217b436be..5b77b9e5ac7e 100644
--- linux-libre-6.1-gnu/Documentation/networking/af_xdp.rst
+++ linux-libre-6.1.44-gnu/Documentation/networking/af_xdp.rst
@@ -433,6 +433,15 @@ start N bytes into the buffer leaving the first N bytes for the
 application to use. The final option is the flags field, but it will
 be dealt with in separate sections for each UMEM flag.
 
+SO_BINDTODEVICE setsockopt
+--------------------------
+
+This is a generic SOL_SOCKET option that can be used to tie AF_XDP
+socket to a particular network interface.  It is useful when a socket
+is created by a privileged process and passed to a non-privileged one.
+Once the option is set, kernel will refuse attempts to bind that socket
+to a different interface.  Updating the value requires CAP_NET_RAW.
+
 XDP_STATISTICS getsockopt
 -------------------------
 
diff --git linux-libre-6.1-gnu/Documentation/networking/ip-sysctl.rst linux-libre-6.1.44-gnu/Documentation/networking/ip-sysctl.rst
index e7b3fa7bb3f7..3301288a7c69 100644
--- linux-libre-6.1-gnu/Documentation/networking/ip-sysctl.rst
+++ linux-libre-6.1.44-gnu/Documentation/networking/ip-sysctl.rst
@@ -337,6 +337,8 @@ tcp_app_win - INTEGER
 	Reserve max(window/2^tcp_app_win, mss) of window for application
 	buffer. Value 0 is special, it means that nothing is reserved.
 
+	Possible values are [0, 31], inclusive.
+
 	Default: 31
 
 tcp_autocorking - BOOLEAN
@@ -1245,8 +1247,8 @@ ping_group_range - 2 INTEGERS
 	Restrict ICMP_PROTO datagram sockets to users in the group range.
 	The default is "1 0", meaning, that nobody (not even root) may
 	create ping sockets.  Setting it to "100 100" would grant permissions
-	to the single group. "0 4294967295" would enable it for the world, "100
-	4294967295" would enable it for the users, but not daemons.
+	to the single group. "0 4294967294" would enable it for the world, "100
+	4294967294" would enable it for the users, but not daemons.
 
 tcp_early_demux - BOOLEAN
 	Enable early demux for established TCP sockets.
diff --git linux-libre-6.1-gnu/Documentation/process/changes.rst linux-libre-6.1.44-gnu/Documentation/process/changes.rst
index 9844ca3a71a6..c76b02d94094 100644
--- linux-libre-6.1-gnu/Documentation/process/changes.rst
+++ linux-libre-6.1.44-gnu/Documentation/process/changes.rst
@@ -60,6 +60,7 @@ openssl & libcrypto    1.0.0            openssl version
 bc                     1.06.95          bc --version
 Sphinx\ [#f1]_         1.7              sphinx-build --version
 cpio                   any              cpio --version
+gtags (optional)       6.6.5            gtags --version
 ====================== ===============  ========================================
 
 .. [#f1] Sphinx is needed only to build the Kernel documentation
@@ -174,6 +175,12 @@ You will need openssl to build kernels 3.7 and higher if module signing is
 enabled.  You will also need openssl development packages to build kernels 4.3
 and higher.
 
+gtags / GNU GLOBAL (optional)
+-----------------------------
+
+The kernel build requires GNU GLOBAL version 6.6.5 or later to generate
+tag files through ``make gtags``.  This is due to its use of the gtags
+``-C (--directory)`` flag.
 
 System utilities
 ****************
diff --git linux-libre-6.1-gnu/Documentation/riscv/vm-layout.rst linux-libre-6.1.44-gnu/Documentation/riscv/vm-layout.rst
index 5b36e45fef60..edb533128712 100644
--- linux-libre-6.1-gnu/Documentation/riscv/vm-layout.rst
+++ linux-libre-6.1.44-gnu/Documentation/riscv/vm-layout.rst
@@ -47,7 +47,7 @@ RISC-V Linux Kernel SV39
                                                               | Kernel-space virtual memory, shared between all processes:
   ____________________________________________________________|___________________________________________________________
                     |            |                  |         |
-   ffffffc6fee00000 | -228    GB | ffffffc6feffffff |    2 MB | fixmap
+   ffffffc6fea00000 | -228    GB | ffffffc6feffffff |    6 MB | fixmap
    ffffffc6ff000000 | -228    GB | ffffffc6ffffffff |   16 MB | PCI io
    ffffffc700000000 | -228    GB | ffffffc7ffffffff |    4 GB | vmemmap
    ffffffc800000000 | -224    GB | ffffffd7ffffffff |   64 GB | vmalloc/ioremap space
@@ -83,7 +83,7 @@ RISC-V Linux Kernel SV48
                                                               | Kernel-space virtual memory, shared between all processes:
   ____________________________________________________________|___________________________________________________________
                     |            |                  |         |
-   ffff8d7ffee00000 |  -114.5 TB | ffff8d7ffeffffff |    2 MB | fixmap
+   ffff8d7ffea00000 |  -114.5 TB | ffff8d7ffeffffff |    6 MB | fixmap
    ffff8d7fff000000 |  -114.5 TB | ffff8d7fffffffff |   16 MB | PCI io
    ffff8d8000000000 |  -114.5 TB | ffff8f7fffffffff |    2 TB | vmemmap
    ffff8f8000000000 |  -112.5 TB | ffffaf7fffffffff |   32 TB | vmalloc/ioremap space
diff --git linux-libre-6.1-gnu/Documentation/security/keys/trusted-encrypted.rst linux-libre-6.1.44-gnu/Documentation/security/keys/trusted-encrypted.rst
index 0bfb4c339748..9bc9db8ec651 100644
--- linux-libre-6.1-gnu/Documentation/security/keys/trusted-encrypted.rst
+++ linux-libre-6.1.44-gnu/Documentation/security/keys/trusted-encrypted.rst
@@ -350,7 +350,8 @@ Load an encrypted key "evm" from saved blob::
 
 Instantiate an encrypted key "evm" using user-provided decrypted data::
 
-    $ keyctl add encrypted evm "new default user:kmk 32 `cat evm_decrypted_data.blob`" @u
+    $ evmkey=$(dd if=/dev/urandom bs=1 count=32 | xxd -c32 -p)
+    $ keyctl add encrypted evm "new default user:kmk 32 $evmkey" @u
     794890253
 
     $ keyctl print 794890253
diff --git linux-libre-6.1-gnu/Documentation/sound/hd-audio/models.rst linux-libre-6.1.44-gnu/Documentation/sound/hd-audio/models.rst
index 9b52f50a6854..120430450014 100644
--- linux-libre-6.1-gnu/Documentation/sound/hd-audio/models.rst
+++ linux-libre-6.1.44-gnu/Documentation/sound/hd-audio/models.rst
@@ -704,7 +704,7 @@ ref
 no-jd
     BIOS setup but without jack-detection
 intel
-    Intel DG45* mobos
+    Intel D*45* mobos
 dell-m6-amic
     Dell desktops/laptops with analog mics
 dell-m6-dmic
diff --git linux-libre-6.1-gnu/Documentation/sphinx/load_config.py linux-libre-6.1.44-gnu/Documentation/sphinx/load_config.py
index eeb394b39e2c..8b416bfd75ac 100644
--- linux-libre-6.1-gnu/Documentation/sphinx/load_config.py
+++ linux-libre-6.1.44-gnu/Documentation/sphinx/load_config.py
@@ -3,7 +3,7 @@
 
 import os
 import sys
-from sphinx.util.pycompat import execfile_
+from sphinx.util.osutil import fs_encoding
 
 # ------------------------------------------------------------------------------
 def loadConfig(namespace):
@@ -48,7 +48,9 @@ def loadConfig(namespace):
             sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
             config = namespace.copy()
             config['__file__'] = config_file
-            execfile_(config_file, config)
+            with open(config_file, 'rb') as f:
+                code = compile(f.read(), fs_encoding, 'exec')
+                exec(code, config)
             del config['__file__']
             namespace.update(config)
         else:
diff --git linux-libre-6.1-gnu/Documentation/trace/ftrace.rst linux-libre-6.1.44-gnu/Documentation/trace/ftrace.rst
index 60bceb018d6a..21f01d32c959 100644
--- linux-libre-6.1-gnu/Documentation/trace/ftrace.rst
+++ linux-libre-6.1.44-gnu/Documentation/trace/ftrace.rst
@@ -2940,7 +2940,7 @@ Produces::
               bash-1994  [000] ....  4342.324898: ima_get_action <-process_measurement
               bash-1994  [000] ....  4342.324898: ima_match_policy <-ima_get_action
               bash-1994  [000] ....  4342.324899: do_truncate <-do_last
-              bash-1994  [000] ....  4342.324899: should_remove_suid <-do_truncate
+              bash-1994  [000] ....  4342.324899: setattr_should_drop_suidgid <-do_truncate
               bash-1994  [000] ....  4342.324899: notify_change <-do_truncate
               bash-1994  [000] ....  4342.324900: current_fs_time <-notify_change
               bash-1994  [000] ....  4342.324900: current_kernel_time <-current_fs_time
diff --git linux-libre-6.1-gnu/Documentation/trace/kprobes.rst linux-libre-6.1.44-gnu/Documentation/trace/kprobes.rst
index 48cf778a2468..fc7ce76eab65 100644
--- linux-libre-6.1-gnu/Documentation/trace/kprobes.rst
+++ linux-libre-6.1.44-gnu/Documentation/trace/kprobes.rst
@@ -131,8 +131,7 @@ For example, if the function is non-recursive and is called with a
 spinlock held, maxactive = 1 should be enough.  If the function is
 non-recursive and can never relinquish the CPU (e.g., via a semaphore
 or preemption), NR_CPUS should be enough.  If maxactive <= 0, it is
-set to a default value.  If CONFIG_PREEMPT is enabled, the default
-is max(10, 2*NR_CPUS).  Otherwise, the default is NR_CPUS.
+set to a default value: max(10, 2*NR_CPUS).
 
 It's not a disaster if you set maxactive too low; you'll just miss
 some probes.  In the kretprobe struct, the nmissed field is set to
diff --git linux-libre-6.1-gnu/Documentation/trace/kprobetrace.rst linux-libre-6.1.44-gnu/Documentation/trace/kprobetrace.rst
index 4274cc6a2f94..08a2a6a3782f 100644
--- linux-libre-6.1-gnu/Documentation/trace/kprobetrace.rst
+++ linux-libre-6.1.44-gnu/Documentation/trace/kprobetrace.rst
@@ -58,8 +58,8 @@ Synopsis of kprobe_events
   NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
   FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
 		  (u8/u16/u32/u64/s8/s16/s32/s64), hexadecimal types
-		  (x8/x16/x32/x64), "string", "ustring" and bitfield
-		  are supported.
+		  (x8/x16/x32/x64), "string", "ustring", "symbol", "symstr"
+                  and bitfield are supported.
 
   (\*1) only for the probe on function entry (offs == 0).
   (\*2) only for return probe.
@@ -96,6 +96,10 @@ offset, and container-size (usually 32). The syntax is::
 
 Symbol type('symbol') is an alias of u32 or u64 type (depends on BITS_PER_LONG)
 which shows given pointer in "symbol+offset" style.
+On the other hand, symbol-string type ('symstr') converts the given address to
+"symbol+offset/symbolsize" style and stores it as a null-terminated string.
+With 'symstr' type, you can filter the event with wildcard pattern of the
+symbols, and you don't need to solve symbol name by yourself.
 For $comm, the default type is "string"; any other type is invalid.
 
 .. _user_mem_access:
diff --git linux-libre-6.1-gnu/Documentation/virt/kvm/api.rst linux-libre-6.1.44-gnu/Documentation/virt/kvm/api.rst
index 896914e3a847..1bc61bf804f1 100644
--- linux-libre-6.1-gnu/Documentation/virt/kvm/api.rst
+++ linux-libre-6.1.44-gnu/Documentation/virt/kvm/api.rst
@@ -4483,6 +4483,18 @@ not holding a previously reported uncorrected error).
 :Parameters: struct kvm_s390_cmma_log (in, out)
 :Returns: 0 on success, a negative value on error
 
+Errors:
+
+  ======     =============================================================
+  ENOMEM     not enough memory can be allocated to complete the task
+  ENXIO      if CMMA is not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but migration mode was not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but dirty tracking has been
+             disabled (and thus migration mode was automatically disabled)
+  EFAULT     if the userspace address is invalid or if no page table is
+             present for the addresses (e.g. when using hugepages).
+  ======     =============================================================
+
 This ioctl is used to get the values of the CMMA bits on the s390
 architecture. It is meant to be used in two scenarios:
 
@@ -4563,12 +4575,6 @@ mask is unused.
 
 values points to the userspace buffer where the result will be stored.
 
-This ioctl can fail with -ENOMEM if not enough memory can be allocated to
-complete the task, with -ENXIO if CMMA is not enabled, with -EINVAL if
-KVM_S390_CMMA_PEEK is not set but migration mode was not enabled, with
--EFAULT if the userspace address is invalid or if no page table is
-present for the addresses (e.g. when using hugepages).
-
 4.108 KVM_S390_SET_CMMA_BITS
 ----------------------------
 
@@ -8248,6 +8254,20 @@ CPU[EAX=1]:ECX[24] (TSC_DEADLINE) is not reported by ``KVM_GET_SUPPORTED_CPUID``
 It can be enabled if ``KVM_CAP_TSC_DEADLINE_TIMER`` is present and the kernel
 has enabled in-kernel emulation of the local APIC.
 
+CPU topology
+~~~~~~~~~~~~
+
+Several CPUID values include topology information for the host CPU:
+0x0b and 0x1f for Intel systems, 0x8000001e for AMD systems.  Different
+versions of KVM return different values for this information and userspace
+should not rely on it.  Currently they return all zeroes.
+
+If userspace wishes to set up a guest topology, it should be careful that
+the values of these three leaves differ for each CPU.  In particular,
+the APIC ID is found in EDX for all subleaves of 0x0b and 0x1f, and in EAX
+for 0x8000001e; the latter also encodes the core id and node id in bits
+7:0 of EBX and ECX respectively.
+
 Obsolete ioctls and capabilities
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
diff --git linux-libre-6.1-gnu/Documentation/virt/kvm/devices/vm.rst linux-libre-6.1.44-gnu/Documentation/virt/kvm/devices/vm.rst
index 60acc39e0e93..147efec626e5 100644
--- linux-libre-6.1-gnu/Documentation/virt/kvm/devices/vm.rst
+++ linux-libre-6.1.44-gnu/Documentation/virt/kvm/devices/vm.rst
@@ -302,6 +302,10 @@ Allows userspace to start migration mode, needed for PGSTE migration.
 Setting this attribute when migration mode is already active will have
 no effects.
 
+Dirty tracking must be enabled on all memslots, else -EINVAL is returned. When
+dirty tracking is disabled on any memslot, migration mode is automatically
+stopped.
+
 :Parameters: none
 :Returns:   -ENOMEM if there is not enough free memory to start migration mode;
 	    -EINVAL if the state of the VM is invalid (e.g. no memory defined);
diff --git linux-libre-6.1-gnu/Documentation/x86/amd-memory-encryption.rst linux-libre-6.1.44-gnu/Documentation/x86/amd-memory-encryption.rst
index a1940ebe7be5..934310ce7258 100644
--- linux-libre-6.1-gnu/Documentation/x86/amd-memory-encryption.rst
+++ linux-libre-6.1.44-gnu/Documentation/x86/amd-memory-encryption.rst
@@ -95,3 +95,39 @@ by supplying mem_encrypt=on on the kernel command line.  However, if BIOS does
 not enable SME, then Linux will not be able to activate memory encryption, even
 if configured to do so by default or the mem_encrypt=on command line parameter
 is specified.
+
+Secure Nested Paging (SNP)
+==========================
+
+SEV-SNP introduces new features (SEV_FEATURES[1:63]) which can be enabled
+by the hypervisor for security enhancements. Some of these features need
+guest side implementation to function correctly. The below table lists the
+expected guest behavior with various possible scenarios of guest/hypervisor
+SNP feature support.
+
++-----------------+---------------+---------------+------------------+
+| Feature Enabled | Guest needs   | Guest has     | Guest boot       |
+| by the HV       | implementation| implementation| behaviour        |
++=================+===============+===============+==================+
+|      No         |      No       |      No       |     Boot         |
+|                 |               |               |                  |
++-----------------+---------------+---------------+------------------+
+|      No         |      Yes      |      No       |     Boot         |
+|                 |               |               |                  |
++-----------------+---------------+---------------+------------------+
+|      No         |      Yes      |      Yes      |     Boot         |
+|                 |               |               |                  |
++-----------------+---------------+---------------+------------------+
+|      Yes        |      No       |      No       | Boot with        |
+|                 |               |               | feature enabled  |
++-----------------+---------------+---------------+------------------+
+|      Yes        |      Yes      |      No       | Graceful boot    |
+|                 |               |               | failure          |
++-----------------+---------------+---------------+------------------+
+|      Yes        |      Yes      |      Yes      | Boot with        |
+|                 |               |               | feature enabled  |
++-----------------+---------------+---------------+------------------+
+
+More details in AMD64 APM[1] Vol 2: 15.34.10 SEV_STATUS MSR
+
+[1] https://www.amd.com/system/files/TechDocs/40332.pdf
diff --git linux-libre-6.1-gnu/MAINTAINERS linux-libre-6.1.44-gnu/MAINTAINERS
index 886d3f69ee64..379387e20a96 100644
--- linux-libre-6.1-gnu/MAINTAINERS
+++ linux-libre-6.1.44-gnu/MAINTAINERS
@@ -3444,7 +3444,7 @@ F:	drivers/net/ieee802154/atusb.h
 AUDIT SUBSYSTEM
 M:	Paul Moore <paul@paul-moore.com>
 M:	Eric Paris <eparis@redhat.com>
-L:	linux-audit@redhat.com (moderated for non-subscribers)
+L:	audit@vger.kernel.org
 S:	Supported
 W:	https://github.com/linux-audit
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit.git
@@ -5183,8 +5183,8 @@ S:	Supported
 W:	https://wiki.samba.org/index.php/LinuxCIFS
 T:	git git://git.samba.org/sfrench/cifs-2.6.git
 F:	Documentation/admin-guide/cifs/
-F:	fs/cifs/
-F:	fs/smbfs_common/
+F:	fs/smb/client/
+F:	fs/smb/common/
 F:	include/uapi/linux/cifs
 
 COMPACTPCI HOTPLUG CORE
@@ -9362,7 +9362,7 @@ F:	drivers/net/wireless/intersil/hostap/
 HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
 L:	platform-driver-x86@vger.kernel.org
 S:	Orphan
-F:	drivers/platform/x86/tc1100-wmi.c
+F:	drivers/platform/x86/hp/tc1100-wmi.c
 
 HPET:	High Precision Event Timers driver
 M:	Clemens Ladisch <clemens@ladisch.de>
@@ -11112,6 +11112,8 @@ M:	Kees Cook <keescook@chromium.org>
 L:	linux-hardening@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening
+F:	Documentation/ABI/testing/sysfs-kernel-oops_count
+F:	Documentation/ABI/testing/sysfs-kernel-warn_count
 F:	include/linux/overflow.h
 F:	include/linux/randomize_kstack.h
 F:	mm/usercopy.c
@@ -11166,8 +11168,8 @@ L:	linux-cifs@vger.kernel.org
 S:	Maintained
 T:	git git://git.samba.org/ksmbd.git
 F:	Documentation/filesystems/cifs/ksmbd.rst
-F:	fs/ksmbd/
-F:	fs/smbfs_common/
+F:	fs/smb/common/
+F:	fs/smb/server/
 
 KERNEL UNIT TESTING FRAMEWORK (KUnit)
 M:	Brendan Higgins <brendanhiggins@google.com>
@@ -11856,7 +11858,7 @@ M:	Eric Piel <eric.piel@tremplin-utc.net>
 S:	Maintained
 F:	Documentation/misc-devices/lis3lv02d.rst
 F:	drivers/misc/lis3lv02d/
-F:	drivers/platform/x86/hp_accel.c
+F:	drivers/platform/x86/hp/hp_accel.c
 
 LIST KUNIT TEST
 M:	David Gow <davidgow@google.com>
diff --git linux-libre-6.1-gnu/Makefile linux-libre-6.1.44-gnu/Makefile
index fddcc9a95e63..dfadfe116d0d 100644
--- linux-libre-6.1-gnu/Makefile
+++ linux-libre-6.1.44-gnu/Makefile
@@ -1,9 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 1
-SUBLEVEL = 0
+SUBLEVEL = 44
 EXTRAVERSION = -gnu
-NAME = Hurr durr I'ma ninja sloth
+NAME = Curry Ramen
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -93,10 +93,17 @@ endif
 
 # If the user is running make -s (silent mode), suppress echoing of
 # commands
+# make-4.0 (and later) keep single letter options in the 1st word of MAKEFLAGS.
 
-ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),)
-  quiet=silent_
-  KBUILD_VERBOSE = 0
+ifeq ($(filter 3.%,$(MAKE_VERSION)),)
+silence:=$(findstring s,$(firstword -$(MAKEFLAGS)))
+else
+silence:=$(findstring s,$(filter-out --%,$(MAKEFLAGS)))
+endif
+
+ifeq ($(silence),s)
+quiet=silent_
+KBUILD_VERBOSE = 0
 endif
 
 export quiet Q KBUILD_VERBOSE
@@ -538,7 +545,7 @@ LDFLAGS_MODULE  =
 CFLAGS_KERNEL	=
 RUSTFLAGS_KERNEL =
 AFLAGS_KERNEL	=
-export LDFLAGS_vmlinux =
+LDFLAGS_vmlinux =
 
 # Use USERINCLUDE when you must reference the UAPI directories only.
 USERINCLUDE    := \
@@ -1232,6 +1239,18 @@ vmlinux.o modules.builtin.modinfo modules.builtin: vmlinux_o
 	@:
 
 PHONY += vmlinux
+# LDFLAGS_vmlinux in the top Makefile defines linker flags for the top vmlinux,
+# not for decompressors. LDFLAGS_vmlinux in arch/*/boot/compressed/Makefile is
+# unrelated; the decompressors just happen to have the same base name,
+# arch/*/boot/compressed/vmlinux.
+# Export LDFLAGS_vmlinux only to scripts/Makefile.vmlinux.
+#
+# _LDFLAGS_vmlinux is a workaround for the 'private export' bug:
+#   https://savannah.gnu.org/bugs/?61463
+# For Make > 4.4, the following simple code will work:
+#  vmlinux: private export LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
+vmlinux: private _LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
+vmlinux: export LDFLAGS_vmlinux = $(_LDFLAGS_vmlinux)
 vmlinux: vmlinux.o $(KBUILD_LDS) modpost
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux
 
@@ -1517,6 +1536,7 @@ endif
 # *.ko are usually independent of vmlinux, but CONFIG_DEBUG_INFOBTF_MODULES
 # is an exception.
 ifdef CONFIG_DEBUG_INFO_BTF_MODULES
+KBUILD_BUILTIN := 1
 modules: vmlinux
 endif
 
diff --git linux-libre-6.1-gnu/arch/Kconfig linux-libre-6.1.44-gnu/arch/Kconfig
index 8f138e580d1a..b60d271bf76a 100644
--- linux-libre-6.1-gnu/arch/Kconfig
+++ linux-libre-6.1.44-gnu/arch/Kconfig
@@ -285,6 +285,9 @@ config ARCH_HAS_DMA_SET_UNCACHED
 config ARCH_HAS_DMA_CLEAR_UNCACHED
 	bool
 
+config ARCH_HAS_CPU_FINALIZE_INIT
+	bool
+
 # Select if arch init_task must go in the __init_task_data section
 config ARCH_TASK_STRUCT_ON_STACK
 	bool
@@ -635,7 +638,7 @@ config ARCH_SUPPORTS_SHADOW_CALL_STACK
 config SHADOW_CALL_STACK
 	bool "Shadow Call Stack"
 	depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
-	depends on DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
 	help
 	  This option enables the compiler's Shadow Call Stack, which
 	  uses a shadow stack to protect function return addresses from
diff --git linux-libre-6.1-gnu/arch/alpha/Kconfig linux-libre-6.1.44-gnu/arch/alpha/Kconfig
index 97fce7386b00..d95d82abdf29 100644
--- linux-libre-6.1-gnu/arch/alpha/Kconfig
+++ linux-libre-6.1.44-gnu/arch/alpha/Kconfig
@@ -28,6 +28,7 @@ config ALPHA
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_MOD_ARCH_SPECIFIC
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select ODD_RT_SIGACTION
 	select OLD_SIGSUSPEND
diff --git linux-libre-6.1-gnu/arch/alpha/boot/tools/objstrip.c linux-libre-6.1.44-gnu/arch/alpha/boot/tools/objstrip.c
index 08b430d25a31..7cf92d172dce 100644
--- linux-libre-6.1-gnu/arch/alpha/boot/tools/objstrip.c
+++ linux-libre-6.1.44-gnu/arch/alpha/boot/tools/objstrip.c
@@ -148,7 +148,7 @@ main (int argc, char *argv[])
 #ifdef __ELF__
     elf = (struct elfhdr *) buf;
 
-    if (elf->e_ident[0] == 0x7f && str_has_prefix((char *)elf->e_ident + 1, "ELF")) {
+    if (memcmp(&elf->e_ident[EI_MAG0], ELFMAG, SELFMAG) == 0) {
 	if (elf->e_type != ET_EXEC) {
 	    fprintf(stderr, "%s: %s is not an ELF executable\n",
 		    prog_name, inname);
diff --git linux-libre-6.1-gnu/arch/alpha/include/asm/bugs.h linux-libre-6.1.44-gnu/arch/alpha/include/asm/bugs.h
deleted file mode 100644
index 78030d1c7e7e..000000000000
--- linux-libre-6.1-gnu/arch/alpha/include/asm/bugs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/asm-alpha/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-/*
- * I don't know of any alpha bugs yet.. Nice chip
- */
-
-static void check_bugs(void)
-{
-}
diff --git linux-libre-6.1-gnu/arch/alpha/include/asm/thread_info.h linux-libre-6.1.44-gnu/arch/alpha/include/asm/thread_info.h
index fdc485d7787a..084c27cb0c70 100644
--- linux-libre-6.1-gnu/arch/alpha/include/asm/thread_info.h
+++ linux-libre-6.1.44-gnu/arch/alpha/include/asm/thread_info.h
@@ -75,7 +75,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 
 /* Work to do on interrupt/exception return.  */
 #define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-				 _TIF_NOTIFY_RESUME)
+				 _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
 
 /* Work to do on any return to userspace.  */
 #define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
diff --git linux-libre-6.1-gnu/arch/alpha/kernel/entry.S linux-libre-6.1.44-gnu/arch/alpha/kernel/entry.S
index e227f3a29a43..c41a5a9c3b9f 100644
--- linux-libre-6.1-gnu/arch/alpha/kernel/entry.S
+++ linux-libre-6.1.44-gnu/arch/alpha/kernel/entry.S
@@ -469,8 +469,10 @@ entSys:
 #ifdef CONFIG_AUDITSYSCALL
 	lda     $6, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
 	and     $3, $6, $3
-#endif
 	bne     $3, strace
+#else
+	blbs    $3, strace		/* check for SYSCALL_TRACE in disguise */
+#endif
 	beq	$4, 1f
 	ldq	$27, 0($5)
 1:	jsr	$26, ($27), sys_ni_syscall
diff --git linux-libre-6.1-gnu/arch/alpha/kernel/module.c linux-libre-6.1.44-gnu/arch/alpha/kernel/module.c
index 5b60c248de9e..cbefa5a77384 100644
--- linux-libre-6.1-gnu/arch/alpha/kernel/module.c
+++ linux-libre-6.1.44-gnu/arch/alpha/kernel/module.c
@@ -146,10 +146,8 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
 	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
 
-	/* The small sections were sorted to the end of the segment.
-	   The following should definitely cover them.  */
-	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
+	gp = got + 0x8000;
 
 	for (i = 0; i < n; i++) {
 		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);
diff --git linux-libre-6.1-gnu/arch/alpha/kernel/traps.c linux-libre-6.1.44-gnu/arch/alpha/kernel/traps.c
index 8a66fe544c69..d9a67b370e04 100644
--- linux-libre-6.1-gnu/arch/alpha/kernel/traps.c
+++ linux-libre-6.1.44-gnu/arch/alpha/kernel/traps.c
@@ -233,7 +233,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 {
 	int signo, code;
 
-	if ((regs->ps & ~IPL_MAX) == 0) {
+	if (type == 3) { /* FEN fault */
+		/* Irritating users can call PAL_clrfen to disable the
+		   FPU for the process.  The kernel will then trap in
+		   do_switch_stack and undo_switch_stack when we try
+		   to save and restore the FP registers.
+
+		   Given that GCC by default generates code that uses the
+		   FP registers, PAL_clrfen is not useful except for DoS
+		   attacks.  So turn the bleeding FPU back on and be done
+		   with it.  */
+		current_thread_info()->pcb.flags |= 1;
+		__reload_thread(&current_thread_info()->pcb);
+		return;
+	}
+	if (!user_mode(regs)) {
 		if (type == 1) {
 			const unsigned int *data
 			  = (const unsigned int *) regs->pc;
@@ -366,20 +380,6 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 		}
 		break;
 
-	      case 3: /* FEN fault */
-		/* Irritating users can call PAL_clrfen to disable the
-		   FPU for the process.  The kernel will then trap in
-		   do_switch_stack and undo_switch_stack when we try
-		   to save and restore the FP registers.
-
-		   Given that GCC by default generates code that uses the
-		   FP registers, PAL_clrfen is not useful except for DoS
-		   attacks.  So turn the bleeding FPU back on and be done
-		   with it.  */
-		current_thread_info()->pcb.flags |= 1;
-		__reload_thread(&current_thread_info()->pcb);
-		return;
-
 	      case 5: /* illoc */
 	      default: /* unexpected instruction-fault type */
 		      ;
diff --git linux-libre-6.1-gnu/arch/alpha/mm/fault.c linux-libre-6.1.44-gnu/arch/alpha/mm/fault.c
index ef427a6bdd1a..2b49aa94e4de 100644
--- linux-libre-6.1-gnu/arch/alpha/mm/fault.c
+++ linux-libre-6.1.44-gnu/arch/alpha/mm/fault.c
@@ -119,20 +119,12 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 		flags |= FAULT_FLAG_USER;
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	mmap_read_lock(mm);
-	vma = find_vma(mm, address);
+	vma = lock_mm_and_find_vma(mm, address, regs);
 	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (expand_stack(vma, address))
-		goto bad_area;
+		goto bad_area_nosemaphore;
 
 	/* Ok, we have a good vm_area for this memory access, so
 	   we can handle it.  */
- good_area:
 	si_code = SEGV_ACCERR;
 	if (cause < 0) {
 		if (!(vma->vm_flags & VM_EXEC))
@@ -189,6 +181,7 @@ retry:
  bad_area:
 	mmap_read_unlock(mm);
 
+ bad_area_nosemaphore:
 	if (user_mode(regs))
 		goto do_sigsegv;
 
diff --git linux-libre-6.1-gnu/arch/arc/Kconfig linux-libre-6.1.44-gnu/arch/arc/Kconfig
index d9a13ccf89a3..cb1074f74c3f 100644
--- linux-libre-6.1-gnu/arch/arc/Kconfig
+++ linux-libre-6.1.44-gnu/arch/arc/Kconfig
@@ -41,6 +41,7 @@ config ARC
 	select HAVE_PERF_EVENTS
 	select HAVE_SYSCALL_TRACEPOINTS
 	select IRQ_DOMAIN
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select OF
 	select OF_EARLY_FLATTREE
diff --git linux-libre-6.1-gnu/arch/arc/include/asm/linkage.h linux-libre-6.1.44-gnu/arch/arc/include/asm/linkage.h
index c9434ff3aa4c..8a3fb71e9cfa 100644
--- linux-libre-6.1-gnu/arch/arc/include/asm/linkage.h
+++ linux-libre-6.1.44-gnu/arch/arc/include/asm/linkage.h
@@ -8,6 +8,10 @@
 
 #include <asm/dwarf.h>
 
+#define ASM_NL		 `	/* use '`' to mark new line in macro */
+#define __ALIGN		.align 4
+#define __ALIGN_STR	__stringify(__ALIGN)
+
 #ifdef __ASSEMBLY__
 
 .macro ST2 e, o, off
@@ -28,10 +32,6 @@
 #endif
 .endm
 
-#define ASM_NL		 `	/* use '`' to mark new line in macro */
-#define __ALIGN		.align 4
-#define __ALIGN_STR	__stringify(__ALIGN)
-
 /* annotation for data we want in DCCM - if enabled in .config */
 .macro ARCFP_DATA nm
 #ifdef CONFIG_ARC_HAS_DCCM
diff --git linux-libre-6.1-gnu/arch/arc/mm/fault.c linux-libre-6.1.44-gnu/arch/arc/mm/fault.c
index 5ca59a482632..f59e722d147f 100644
--- linux-libre-6.1-gnu/arch/arc/mm/fault.c
+++ linux-libre-6.1.44-gnu/arch/arc/mm/fault.c
@@ -113,15 +113,9 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	mmap_read_lock(mm);
-
-	vma = find_vma(mm, address);
+	vma = lock_mm_and_find_vma(mm, address, regs);
 	if (!vma)
-		goto bad_area;
-	if (unlikely(address < vma->vm_start)) {
-		if (!(vma->vm_flags & VM_GROWSDOWN) || expand_stack(vma, address))
-			goto bad_area;
-	}
+		goto bad_area_nosemaphore;
 
 	/*
 	 * vm_area is good, now check permissions for this memory access
@@ -161,6 +155,7 @@ retry:
 bad_area:
 	mmap_read_unlock(mm);
 
+bad_area_nosemaphore:
 	/*
 	 * Major/minor page fault accounting
 	 * (in case of retry we only land here once)
diff --git linux-libre-6.1-gnu/arch/arm/Kconfig linux-libre-6.1.44-gnu/arch/arm/Kconfig
index a08c9d092a33..6d5afe2e6ba3 100644
--- linux-libre-6.1-gnu/arch/arm/Kconfig
+++ linux-libre-6.1.44-gnu/arch/arm/Kconfig
@@ -5,6 +5,7 @@ config ARM
 	select ARCH_32BIT_OFF_T
 	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
 	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
@@ -122,6 +123,7 @@ config ARM
 	select HAVE_UID16
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
 	select IRQ_FORCED_THREADING
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_REL
 	select NEED_DMA_MAP_STATE
 	select OF_EARLY_FLATTREE if OF
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 2fc9a5d5e0c0..625b9b311b49 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -527,7 +527,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <31 0>;
-		pendown-gpio = <&gpio1 31 0>;
+		pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-370.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-370.dtsi
index 9dc928859ad3..2013a5ccecd3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-370.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-370.dtsi
@@ -84,7 +84,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-375.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-375.dtsi
index 929deaf312a5..c310ef26d1cc 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-375.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-375.dtsi
@@ -592,7 +592,7 @@
 
 			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-380.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-380.dtsi
index ce1dddb2269b..e94f22b0e9b5 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-380.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-380.dtsi
@@ -89,7 +89,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -118,7 +118,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 72ac807cae25..0c1f238e4c30 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -23,6 +23,12 @@
 		stdout-path = &uart0;
 	};
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1024 MB */
@@ -483,7 +489,17 @@
 				};
 			};
 
-			/* port 6 is connected to eth0 */
+			ports@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 		};
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-385.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-385.dtsi
index 83392b92dae2..be8d607c59b2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-385.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-385.dtsi
@@ -93,7 +93,7 @@
 			/* x1 port */
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -121,7 +121,7 @@
 			/* x1 port */
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -152,7 +152,7 @@
 			 */
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-39x.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-39x.dtsi
index 923b035a3ab3..9d1cac49c022 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-39x.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-39x.dtsi
@@ -463,7 +463,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -492,7 +492,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -524,7 +524,7 @@
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index bf9360f41e0a..5ea9d509cd30 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -107,7 +107,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -135,7 +135,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -163,7 +163,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -191,7 +191,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 0714af52e607..6c6fbb9faf5a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -122,7 +122,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -150,7 +150,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -178,7 +178,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -206,7 +206,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -234,7 +234,7 @@
 
 			pcie6: pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -262,7 +262,7 @@
 
 			pcie7: pcie@7,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -290,7 +290,7 @@
 
 			pcie8: pcie@8,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -318,7 +318,7 @@
 
 			pcie9: pcie@9,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
index 9b4cf5ebe6d5..c62aff908ab4 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
@@ -63,7 +63,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
-		spi-max-frequency = <100000000>; /* 100 MHz */
+		spi-max-frequency = <50000000>; /* 50 MHz */
 #include "openbmc-flash-layout.dtsi"
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
index ff4c07c69af1..4554abf0c7cd 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
@@ -31,7 +31,7 @@
 		};
 
 		system-fault {
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
 			panic-indicator;
 		};
 	};
@@ -51,7 +51,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
-		spi-max-frequency = <100000000>; /* 100 MHz */
+		spi-max-frequency = <50000000>; /* 50 MHz */
 #include "openbmc-flash-layout-64.dtsi"
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index a6a2bc3b855c..f11feb98fde3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -162,16 +162,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		/* LPC FW cycle bridge region requires natural alignment */
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		/* 48MB region from the end of flash to start of vga memory */
-		ramoops@bc000000 {
+		ramoops@b3e00000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
 			ftrace-size = <0x8000>;
@@ -179,6 +172,12 @@
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
 
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
 		/* VGA region is dictated by hardware strapping */
 		vga_memory: region@bf000000 {
 			no-map;
@@ -245,7 +244,7 @@
 		};
 	};
 
-	iio-hwmon-battery {
+	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&adc1 7>;
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index bf59a9962379..77a3a27b04e2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -95,14 +95,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		ramoops@bc000000 {
+		ramoops@b3e00000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
 			ftrace-size = <0x8000>;
@@ -110,6 +105,13 @@
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
 
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
 		vga_memory: region@bf000000 {
 			no-map;
 			compatible = "shared-dma-pool";
@@ -218,7 +220,7 @@
 		};
 	};
 
-	iio-hwmon-battery {
+	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&adc1 7>;
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
index 3b25c67795dd..4af8a1c96ed6 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -789,7 +789,7 @@
 };
 
 &shdwc {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	status = "okay";
 
 	input@0 {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/at91sam9261ek.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/at91sam9261ek.dts
index 88869ca874d1..045cb253f23a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/at91sam9261ek.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/at91sam9261ek.dts
@@ -156,7 +156,7 @@
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
 					spi-max-frequency = <3000000>;
-					pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
 
 					ti,x-min = /bits/ 16 <150>;
 					ti,x-max = /bits/ 16 <3830>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
index 14f58033efeb..ca2266b936ee 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
@@ -128,7 +128,7 @@
 
 			fixed-link {
 				speed = <1000>;
-				duplex-full;
+				full-duplex;
 			};
 		};
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index e678bc03d816..008de8ee2584 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -187,7 +187,7 @@
 
 			fixed-link {
 				speed = <1000>;
-				duplex-full;
+				full-duplex;
 			};
 		};
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/bcm5301x.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/bcm5301x.dtsi
index 5fc1b847f4aa..787a0dd8216b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/bcm5301x.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/bcm5301x.dtsi
@@ -542,7 +542,6 @@
 				  "spi_lr_session_done",
 				  "spi_lr_overread";
 		clocks = <&iprocmed>;
-		clock-names = "iprocmed";
 		num-cs = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/dove.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/dove.dtsi
index 00a36fba2fd2..9aee3cfd3e98 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/dove.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/dove.dtsi
@@ -139,7 +139,7 @@
 			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/e60k02.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/e60k02.dtsi
index 935e2359f8df..07ae96486385 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/e60k02.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/e60k02.dtsi
@@ -302,6 +302,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/e70k02.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/e70k02.dtsi
index 27ef9a62b23c..a1f9fbd6004a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/e70k02.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/e70k02.dtsi
@@ -312,6 +312,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos3250-rinato.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
index 6d2c7bb19184..2eb682009815 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -250,7 +250,7 @@
 	i80-if-timings {
 		cs-setup = <0>;
 		wr-setup = <0>;
-		wr-act = <1>;
+		wr-active = <1>;
 		wr-hold = <0>;
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
index 021d9fc1b492..27a1a8952665 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
@@ -10,7 +10,7 @@
 / {
 thermal-zones {
 	cpu_thermal: cpu-thermal {
-		thermal-sensors = <&tmu 0>;
+		thermal-sensors = <&tmu>;
 		polling-delay-passive = <0>;
 		polling-delay = <0>;
 		trips {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos4.dtsi
index 5c4ecda27a47..7ba7a18c2500 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos4.dtsi
@@ -605,7 +605,7 @@
 			status = "disabled";
 
 			hdmi_i2c_phy: hdmiphy@38 {
-				compatible = "exynos4210-hdmiphy";
+				compatible = "samsung,exynos4210-hdmiphy";
 				reg = <0x38>;
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4210.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos4210.dtsi
index 2c25cc37934e..f8c6c5d1906a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4210.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos4210.dtsi
@@ -393,7 +393,6 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
 };
 
 &gic {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts
index 202ab0fee3b7..bfc79490e2e2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -182,7 +182,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5250.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos5250.dtsi
index 4708dcd575a7..01751706ff96 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5250.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos5250.dtsi
@@ -1107,7 +1107,7 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
+	thermal-sensors = <&tmu>;
 
 	cooling-maps {
 		map0 {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
index d1cbc6b8a570..e18110b93875 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -120,7 +120,6 @@
 };
 
 &cpu0_thermal {
-	thermal-sensors = <&tmu_cpu0 0>;
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5420.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos5420.dtsi
index 9f2523a873d9..62263eb91b3c 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5420.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos5420.dtsi
@@ -592,7 +592,7 @@
 		};
 
 		mipi_phy: mipi-video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
+			compatible = "samsung,exynos5420-mipi-video-phy";
 			syscon = <&pmu_system_controller>;
 			#phy-cells = <1>;
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index 3de7019572a2..5e4280393706 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -31,7 +31,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			trips {
 				cpu0_alert0: cpu-alert-0 {
 					temperature = <70000>; /* millicelsius */
@@ -86,7 +86,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			trips {
 				cpu1_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -130,7 +130,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			trips {
 				cpu2_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -174,7 +174,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			trips {
 				cpu3_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -218,7 +218,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			trips {
 				gpu_alert0: gpu-alert-0 {
 					temperature = <70000>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index a6961ff24030..e6e7e2ff2a26 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -50,7 +50,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -139,7 +139,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -212,7 +212,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -285,7 +285,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -358,7 +358,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-ppd.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx53-ppd.dts
index 37d0cffea99c..70c4a4852256 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-ppd.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx53-ppd.dts
@@ -488,7 +488,7 @@
 	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index 4bc4371e6bae..4b81a975c979 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -632,7 +632,6 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
 	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-mba6.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx6qdl-mba6.dtsi
index 78555a618851..7b7e6c2ad190 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-mba6.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx6qdl-mba6.dtsi
@@ -209,6 +209,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index 663ee9df79e6..d6eee157c63b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -597,6 +597,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
index 162dc259edc8..5a74c7f68eb6 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts
index 5162fe227d1e..fdc10563f147 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -52,7 +52,7 @@
 };
 
 &i2c4 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index d917dc4f2f22..6ad39dca7009 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -64,7 +64,7 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <7 0>;
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio2 7 0>;
+		pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&reg_3p3v>;
 		ti,x-min = /bits/ 16 <0>;
 		ti,x-max = /bits/ 16 <4095>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts
index 104a85254adb..5afb1674e012 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts
@@ -43,7 +43,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -64,7 +64,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-sdb.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx7d-sdb.dts
index f483bc0afe5e..234e5fc647b2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-sdb.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx7d-sdb.dts
@@ -205,7 +205,7 @@
 		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 0>;
-		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
 		touchscreen-max-pressure = <255>;
 		wakeup-source;
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-smegw01.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx7d-smegw01.dts
index 546268b8d0b1..c0f00f5db11e 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-smegw01.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx7d-smegw01.dts
@@ -198,6 +198,7 @@
 &usbotg2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg2>;
+	over-current-active-low;
 	dr_mode = "host";
 	status = "okay";
 };
@@ -374,7 +375,7 @@
 
 	pinctrl_usbotg2: usbotg2grp {
 		fsl,pins = <
-			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x04
+			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x5c
 		>;
 	};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7s.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx7s.dtsi
index 0ebf39915c91..19c5ad0ca91e 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7s.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/imx7s.dtsi
@@ -513,7 +513,7 @@
 
 				mux: mux-controller {
 					compatible = "mmio-mux";
-					#mux-control-cells = <0>;
+					#mux-control-cells = <1>;
 					mux-reg-masks = <0x14 0x00000010>;
 				};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/iwg20d-q7-common.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 03caea6fc6ff..4351c5a02fa5 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -49,7 +49,7 @@
 	lcd_backlight: backlight {
 		compatible = "pwm-backlight";
 
-		pwms = <&pwm3 0 5000000 0>;
+		pwms = <&pwm3 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
index 0097e72e3fb2..f4df4cc1dfa5 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -18,6 +18,8 @@
 
 	gpio-restart {
 		compatible = "gpio-restart";
+		pinctrl-0 = <&reset_pins>;
+		pinctrl-names = "default";
 		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
 		priority = <200>;
 	};
@@ -39,7 +41,7 @@
 	status = "okay";
 
 	spi3: spi@400 {
-		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-0 = <&fc3_b_pins>, <&spi3_cs_pins>;
 		pinctrl-names = "default";
 		status = "okay";
 		cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
@@ -59,6 +61,12 @@
 		function = "miim_c";
 	};
 
+	reset_pins: reset-pins {
+		/* SYS_RST# */
+		pins = "GPIO_56";
+		function = "gpio";
+	};
+
 	sgpio_a_pins: sgpio-a-pins {
 		/* SCK, D0, D1 */
 		pins = "GPIO_32", "GPIO_33", "GPIO_34";
@@ -71,6 +79,12 @@
 		function = "sgpio_b";
 	};
 
+	spi3_cs_pins: spi3-cs-pins {
+		/* CS# */
+		pins = "GPIO_46";
+		function = "gpio";
+	};
+
 	usart0_pins: usart0-pins {
 		/* RXD, TXD */
 		pins = "GPIO_25", "GPIO_26";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/meson8.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/meson8.dtsi
index 0f8bac8bac8b..f9da7faa2186 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/meson8.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/meson8.dtsi
@@ -749,13 +749,13 @@
 
 &uart_B {
 	compatible = "amlogic,meson8-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
 	compatible = "amlogic,meson8-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/meson8b.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/meson8b.dtsi
index cf9c04a61ba3..d3e0f085904d 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/meson8b.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/meson8b.dtsi
@@ -737,13 +737,13 @@
 
 &uart_B {
 	compatible = "amlogic,meson8b-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
 	compatible = "amlogic,meson8b-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
index d10669fcd527..9e9eba8bad5e 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
@@ -366,7 +366,7 @@
 		spi-max-frequency = <20000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
index 491606c4f044..2a394cc15284 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
@@ -142,7 +142,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
index a0c2d7652625..f7b38bee039b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
@@ -388,7 +388,7 @@
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -422,7 +422,7 @@
 		reg = <1>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -447,7 +447,7 @@
 		reg = <0>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
index 3dad32834e5e..f53d45fa1de8 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -74,7 +74,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -135,7 +135,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
index 132e702281fc..87359ab05db3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
@@ -107,7 +107,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -146,7 +146,7 @@
 		reg = <1>;
 		npcm,fiu-rx-bus-width = <2>;
 
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -173,7 +173,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-cm-t3x.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index e61b8a2bfb7d..51baedf1603b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -227,7 +227,7 @@
 
 		interrupt-parent = <&gpio2>;
 		interrupts = <25 0>;		/* gpio_57 */
-		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index 3decc2d78a6c..a7f99ae0c1fe 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -54,7 +54,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <27 0>;		/* gpio_27 */
-		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-gta04.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-gta04.dtsi
index 28a6a9345be5..2dbee248a126 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-gta04.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -612,6 +612,22 @@
 	clock-frequency = <100000>;
 };
 
+&mcspi1 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "disabled";
+};
+
+&mcspi3 {
+	status = "disabled";
+};
+
+&mcspi4 {
+	status = "disabled";
+};
+
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-gta04a5one.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-gta04a5one.dts
index 9db9fe67cd63..95df45cc70c0 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-gta04a5one.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-gta04a5one.dts
@@ -5,9 +5,11 @@
 
 #include "omap3-gta04a5.dts"
 
-&omap3_pmx_core {
+/ {
 	model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
+};
 
+&omap3_pmx_core {
 	gpmc_pins: pinmux_gpmc_pins {
 		pinctrl-single,pins = <
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-lilly-a83x.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index c595afe4181d..d310b5c7bac3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -311,7 +311,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 0>;   /* boot6 / gpio_8 */
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&reg_vcc3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsc2048_pins>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 1d6e88f99eb3..c3570acc35fa 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -149,7 +149,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 7e30f9d45790..d95a0e130058 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -160,7 +160,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-pandora-common.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 559853764487..4c3b6bab179c 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -651,7 +651,7 @@
 		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <30 IRQ_TYPE_NONE>;	/* GPIO_94 */
-		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&vaux4>;
 
 		ti,x-min = /bits/ 16 <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap5-cm-t54.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap5-cm-t54.dts
index ca759b7b8a58..e62ea8b6d53f 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap5-cm-t54.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -354,7 +354,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <15 0>;			/* gpio1_wk15 */
-		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index 193569f0ca5f..4bdadb7681c3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -26,6 +26,16 @@
 	};
 
 	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+
+		external_image_region: external-image@3100000 {
+			reg = <0x03100000 0x200000>;
+			no-map;
+		};
+
 		adsp_region: adsp@3300000 {
 			reg = <0x03300000 0x1400000>;
 			no-map;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi
index 942aa2278355..4b57e9f5bc64 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1271,7 +1271,7 @@
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-				opp-320000000 {
+				opp-450000000 {
 					opp-hz = /bits/ 64 <450000000>;
 				};
 
@@ -1615,7 +1615,7 @@
 		};
 
 		etb@1a01000 {
-			compatible = "coresight-etb10", "arm,primecell";
+			compatible = "arm,coresight-etb10", "arm,primecell";
 			reg = <0x1a01000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 91716298ec5e..be1ab7eff8ff 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -23,6 +23,10 @@
 	status = "okay";
 };
 
+&blsp2_dma {
+	qcom,controlled-remotely;
+};
+
 &blsp2_i2c5 {
 	status = "okay";
 	clock-frequency = <200000>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
index 44cd72f1b1be..116e59a3b76d 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
@@ -19,16 +19,16 @@
 		serial@f995e000 {
 			status = "okay";
 		};
+	};
+};
 
-		sdhci@f9824900 {
-			bus-width = <8>;
-			non-removable;
-			status = "okay";
-		};
+&sdhc_1 {
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
 
-		sdhci@f98a4900 {
-			cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
-			bus-width = <4>;
-		};
-	};
+&sdhc_2 {
+	cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8084.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-apq8084.dtsi
index f2fb7c975af8..69da87577ad0 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -419,7 +419,7 @@
 			status = "disabled";
 		};
 
-		mmc@f9824900 {
+		sdhc_1: mmc@f9824900 {
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
 			reg-names = "hc", "core";
@@ -432,7 +432,7 @@
 			status = "disabled";
 		};
 
-		mmc@f98a4900 {
+		sdhc_2: mmc@f98a4900 {
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 			reg-names = "hc", "core";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
index 79b0c6318e52..0993f840d1fc 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -11,9 +11,9 @@
 		dma-controller@7984000 {
 			status = "okay";
 		};
-
-		qpic-nand@79b0000 {
-			status = "okay";
-		};
 	};
 };
+
+&nand {
+	status = "okay";
+};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index a63b3778636d..468ebc40d2ad 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -102,10 +102,10 @@
 			status = "okay";
 			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
-
-		qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
index 0107f552f520..7ef635997efa 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -65,11 +65,11 @@
 		dma-controller@7984000 {
 			status = "okay";
 		};
-
-		qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi
index b23591110bd2..02e13d8c222a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -426,8 +426,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
-				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
+			ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>,
+				 <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq8064.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 90c08b51680a..0ce58cff3016 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1085,8 +1085,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1136,8 +1136,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1187,8 +1187,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi
index 7a9be0acf3f5..c4b2e9ac2494 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -300,7 +300,7 @@
 			qcom,ipc = <&apcs 8 0>;
 			qcom,smd-edge = <15>;
 
-			rpm_requests: rpm_requests {
+			rpm_requests: rpm-requests {
 				compatible = "qcom,rpm-msm8974";
 				qcom,smd-channels = "rpm_requests";
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
index c72540223fa9..a4bf1d5ee206 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -303,6 +303,45 @@
 			status = "disabled";
 		};
 
+		pcie_ep: pcie-ep@1c00000 {
+			compatible = "qcom,sdx55-pcie-ep";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xc8>,
+			      <0x40001000 0x1000>,
+			      <0x40200000 0x100000>,
+			      <0x01c03000 0x3000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+				    "mmio";
+
+			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+			clocks = <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
+			clock-names = "aux", "cfg", "bus_master", "bus_slave",
+				      "slave_q2a", "sleep", "ref";
+
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global", "doorbell";
+			reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_GDSC>;
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+			max-link-speed = <3>;
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
 		pcie0_phy: phy@1c07000 {
 			compatible = "qcom,sdx55-qmp-pcie-phy";
 			reg = <0x01c07000 0x1c4>;
@@ -400,45 +439,6 @@
 			status = "disabled";
 		};
 
-		pcie_ep: pcie-ep@40000000 {
-			compatible = "qcom,sdx55-pcie-ep";
-			reg = <0x01c00000 0x3000>,
-			      <0x40000000 0xf1d>,
-			      <0x40000f20 0xc8>,
-			      <0x40001000 0x1000>,
-			      <0x40200000 0x100000>,
-			      <0x01c03000 0x3000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
-				    "mmio";
-
-			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
-
-			clocks = <&gcc GCC_PCIE_AUX_CLK>,
-				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLEEP_CLK>,
-				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
-			clock-names = "aux", "cfg", "bus_master", "bus_slave",
-				      "slave_q2a", "sleep", "ref";
-
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global", "doorbell";
-			reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-			wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
-			resets = <&gcc GCC_PCIE_BCR>;
-			reset-names = "core";
-			power-domains = <&gcc PCIE_GDSC>;
-			phys = <&pcie0_lane>;
-			phy-names = "pciephy";
-			max-link-speed = <3>;
-			num-lanes = <2>;
-
-			status = "disabled";
-		};
-
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sdx55-mpss-pas";
 			reg = <0x04080000 0x4040>;
@@ -577,7 +577,7 @@
 		};
 
 		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx55-smmu-500", "arm,mmu-500";
+			compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x15000000 0x20000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-sdx65.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-sdx65.dtsi
index 4cd405db5500..ecb9171e4da5 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -455,7 +455,7 @@
 		};
 
 		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
+			compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x15000000 0x40000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/rk3288.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/rk3288.dtsi
index 487b0e03d4b4..511ca864c1b2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/rk3288.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/rk3288.dtsi
@@ -942,7 +942,7 @@
 		status = "disabled";
 	};
 
-	spdif: sound@ff88b0000 {
+	spdif: sound@ff8b0000 {
 		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
 		reg = <0x0 0xff8b0000 0x0 0x10000>;
 		#sound-dai-cells = <0>;
@@ -1181,6 +1181,7 @@
 		clock-names = "dp", "pclk";
 		phys = <&edp_phy>;
 		phy-names = "dp";
+		power-domains = <&power RK3288_PD_VIO>;
 		resets = <&cru SRST_EDP>;
 		reset-names = "dp";
 		rockchip,grf = <&grf>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/s5pv210.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/s5pv210.dtsi
index 12e90a1cc6a1..1a9e4a96b2ff 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/s5pv210.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/s5pv210.dtsi
@@ -566,7 +566,7 @@
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
 						<&clocks SCLK_CSIS>;
-				clock-names = "clk_csis",
+				clock-names = "csis",
 						"sclk_csis";
 				bus-width = <4>;
 				status = "disabled";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/sam9x60.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/sam9x60.dtsi
index 8f5477e307dd..37a5d96aaf64 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/sam9x60.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/sam9x60.dtsi
@@ -564,7 +564,7 @@
 			mpddrc: mpddrc@ffffe800 {
 				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
 				reg = <0xffffe800 0x200>;
-				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
 				clock-names = "ddrck", "mpddr";
 			};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/spear320-hmi.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/spear320-hmi.dts
index 34503ac9c51c..721e5ee7b680 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/spear320-hmi.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/spear320-hmi.dts
@@ -241,7 +241,7 @@
 					irq-trigger = <0x1>;
 
 					stmpegpio: stmpe-gpio {
-						compatible = "stmpe,gpio";
+						compatible = "st,stmpe-gpio";
 						reg = <0>;
 						gpio-controller;
 						#gpio-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/spear600.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/spear600.dtsi
index fd41243a0b2c..9d5a04a46b14 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/spear600.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/spear600.dtsi
@@ -47,7 +47,7 @@
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0xfc200000 0x1000>;
 			interrupt-parent = <&vic1>;
-			interrupts = <12>;
+			interrupts = <13>;
 			status = "disabled";
 		};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stihxxx-b2120.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 2aa94605d3d4..d52a7aaa1074 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -178,7 +178,7 @@
 				tsin-num = <0>;
 				serial-not-parallel;
 				i2c-bus = <&ssc2>;
-				reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>;
 				dvb-card = <STV0367_TDA18212_NIMA_1>;
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32f7-pinctrl.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 8f37aefa7315..000278ec2c58 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -284,6 +284,88 @@
 					slew-rate = <2>;
 				};
 			};
+
+			can1_pins_a: can1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_b: can1-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_c: can1-2 {
+				pins1 {
+					pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can1_pins_d: can1-3 {
+				pins1 {
+					pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can2_pins_a: can2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_b: can2-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_a: can3-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_b: can3-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 4, AF11)>;  /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
 		};
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp131.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp131.dtsi
index dd35a607073d..723787f72cfd 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp131.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp131.dtsi
@@ -405,6 +405,7 @@
 
 			part_number_otp: part_number_otp@4 {
 				reg = <0x4 0x2>;
+				bits = <0 12>;
 			};
 			ts_cal1: calib@5c {
 				reg = <0x5c 0x2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index a9d2bec99014..e15a3b2a9b39 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1880,6 +1880,21 @@
 		};
 	};
 
+	spi1_pins_b: spi1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
 	spi2_pins_a: spi2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
@@ -2448,19 +2463,4 @@
 			bias-disable;
 		};
 	};
-
-	spi1_pins_b: spi1-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
-				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
-			bias-disable;
-		};
-	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
index d865ab5d866b..dd23de85100c 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
@@ -101,8 +101,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
index 2e3c9fbb4eb3..275167f26fd9 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
@@ -13,7 +13,6 @@
 /dts-v1/;
 
 #include "stm32mp157.dtsi"
-#include "stm32mp15xc.dtsi"
 #include "stm32mp15xx-dhcor-som.dtsi"
 #include "stm32mp15xx-dhcor-avenger96.dtsi"
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
index 30156b7546ed..d540550f7da2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
@@ -391,8 +391,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 5f586f024060..38f46c2c83aa 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -137,10 +137,13 @@
 
 	sound {
 		compatible = "audio-graph-card";
-		routing =
-			"MIC_IN", "Capture",
-			"Capture", "Mic Bias",
-			"Playback", "HP_OUT";
+		widgets = "Headphone", "Headphone Jack",
+			  "Line", "Line In Jack",
+			  "Microphone", "Microphone Jack";
+		routing = "Headphone Jack", "HP_OUT",
+			  "LINE_IN", "Line In Jack",
+			  "MIC_IN", "Microphone Jack",
+			  "Microphone Jack", "Mic Bias";
 		dais = <&sai2a_port &sai2b_port>;
 		status = "okay";
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 238a611192e7..d3b85a8764d7 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -428,8 +428,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 90933077d66d..f068e4fcc404 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -88,7 +88,7 @@
 
 	sound {
 		compatible = "audio-graph-card";
-		label = "STM32MP1-AV96-HDMI";
+		label = "STM32-AV96-HDMI";
 		dais = <&sai2a_port>;
 		status = "okay";
 	};
@@ -100,7 +100,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
@@ -322,6 +322,12 @@
 			};
 		};
 	};
+
+	dh_mac_eeprom: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
 };
 
 &ltdc {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
index 27477bb219de..bb4ac6c13cbd 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
@@ -192,6 +192,12 @@
 		reg = <0x50>;
 		pagesize = <16>;
 	};
+
+	dh_mac_eeprom: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
 };
 
 &sdmmc1 {	/* MicroSD */
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 134a798ad3f2..bba19f21e527 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -213,12 +213,6 @@
 			status = "disabled";
 		};
 	};
-
-	eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
 };
 
 &ipcc {
@@ -247,8 +241,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 8b48d3c89a04..fdc48536e97d 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -438,7 +438,7 @@
 	i2s2_port: port {
 		i2s2_endpoint: endpoint {
 			remote-endpoint = <&sii9022_tx_endpoint>;
-			format = "i2s";
+			dai-format = "i2s";
 			mclk-fs = <256>;
 		};
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
index 43641cb82398..343b02b97155 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
@@ -57,7 +57,7 @@
 		regulator-ramp-delay = <50>; /* 4ms */
 
 		enable-active-high;
-		enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 		gpios-states = <0x1>;
 		states = <1100000 0>, <1300000 1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/vexpress-v2p-ca5s.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 3b88209bacea..ff1f9a1bcfcf 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -132,6 +132,7 @@
 		reg = <0x2c0f0000 0x1000>;
 		interrupts = <0 84 4>;
 		cache-level = <2>;
+		cache-unified;
 	};
 
 	pmu {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 42ed4a04a12e..6280c5e86a12 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -345,7 +345,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts linux-libre-6.1.44-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index de79dcfd32e6..ba2001f37315 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ linux-libre-6.1.44-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -340,7 +340,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
diff --git linux-libre-6.1-gnu/arch/arm/configs/bcm2835_defconfig linux-libre-6.1.44-gnu/arch/arm/configs/bcm2835_defconfig
index a51babd178c2..be0c984a6694 100644
--- linux-libre-6.1-gnu/arch/arm/configs/bcm2835_defconfig
+++ linux-libre-6.1.44-gnu/arch/arm/configs/bcm2835_defconfig
@@ -107,6 +107,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_DRM=y
 CONFIG_DRM_V3D=y
 CONFIG_DRM_VC4=y
+CONFIG_FB=y
 CONFIG_FB_SIMPLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
diff --git linux-libre-6.1-gnu/arch/arm/include/asm/assembler.h linux-libre-6.1.44-gnu/arch/arm/include/asm/assembler.h
index 90fbe4a3f9c8..84912b19cac8 100644
--- linux-libre-6.1-gnu/arch/arm/include/asm/assembler.h
+++ linux-libre-6.1.44-gnu/arch/arm/include/asm/assembler.h
@@ -402,6 +402,23 @@ ALT_UP_B(.L0_\@)
 #endif
 	.endm
 
+/*
+ * Raw SMP data memory barrier
+ */
+	.macro	__smp_dmb mode
+#if __LINUX_ARM_ARCH__ >= 7
+	.ifeqs "\mode","arm"
+	dmb	ish
+	.else
+	W(dmb)	ish
+	.endif
+#elif __LINUX_ARM_ARCH__ == 6
+	mcr	p15, 0, r0, c7, c10, 5	@ dmb
+#else
+	.error "Incompatible SMP platform"
+#endif
+	.endm
+
 #if defined(CONFIG_CPU_V7M)
 	/*
 	 * setmode is used to assert to be in svc mode during boot. For v7-M
diff --git linux-libre-6.1-gnu/arch/arm/include/asm/bugs.h linux-libre-6.1.44-gnu/arch/arm/include/asm/bugs.h
index 97a312ba0840..fe385551edec 100644
--- linux-libre-6.1-gnu/arch/arm/include/asm/bugs.h
+++ linux-libre-6.1.44-gnu/arch/arm/include/asm/bugs.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- *  arch/arm/include/asm/bugs.h
- *
  *  Copyright (C) 1995-2003 Russell King
  */
 #ifndef __ASM_BUGS_H
@@ -10,10 +8,8 @@
 extern void check_writebuffer_bugs(void);
 
 #ifdef CONFIG_MMU
-extern void check_bugs(void);
 extern void check_other_bugs(void);
 #else
-#define check_bugs() do { } while (0)
 #define check_other_bugs() do { } while (0)
 #endif
 
diff --git linux-libre-6.1-gnu/arch/arm/include/asm/sync_bitops.h linux-libre-6.1.44-gnu/arch/arm/include/asm/sync_bitops.h
index 6f5d627c44a3..f46b3c570f92 100644
--- linux-libre-6.1-gnu/arch/arm/include/asm/sync_bitops.h
+++ linux-libre-6.1.44-gnu/arch/arm/include/asm/sync_bitops.h
@@ -14,14 +14,35 @@
  * ops which are SMP safe even on a UP kernel.
  */
 
+/*
+ * Unordered
+ */
+
 #define sync_set_bit(nr, p)		_set_bit(nr, p)
 #define sync_clear_bit(nr, p)		_clear_bit(nr, p)
 #define sync_change_bit(nr, p)		_change_bit(nr, p)
-#define sync_test_and_set_bit(nr, p)	_test_and_set_bit(nr, p)
-#define sync_test_and_clear_bit(nr, p)	_test_and_clear_bit(nr, p)
-#define sync_test_and_change_bit(nr, p)	_test_and_change_bit(nr, p)
 #define sync_test_bit(nr, addr)		test_bit(nr, addr)
-#define arch_sync_cmpxchg		arch_cmpxchg
 
+/*
+ * Fully ordered
+ */
+
+int _sync_test_and_set_bit(int nr, volatile unsigned long * p);
+#define sync_test_and_set_bit(nr, p)	_sync_test_and_set_bit(nr, p)
+
+int _sync_test_and_clear_bit(int nr, volatile unsigned long * p);
+#define sync_test_and_clear_bit(nr, p)	_sync_test_and_clear_bit(nr, p)
+
+int _sync_test_and_change_bit(int nr, volatile unsigned long * p);
+#define sync_test_and_change_bit(nr, p)	_sync_test_and_change_bit(nr, p)
+
+#define arch_sync_cmpxchg(ptr, old, new)				\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	__smp_mb__before_atomic();					\
+	__ret = arch_cmpxchg_relaxed((ptr), (old), (new));		\
+	__smp_mb__after_atomic();					\
+	__ret;								\
+})
 
 #endif
diff --git linux-libre-6.1-gnu/arch/arm/include/asm/thread_info.h linux-libre-6.1.44-gnu/arch/arm/include/asm/thread_info.h
index aecc403b2880..7f092cb55a41 100644
--- linux-libre-6.1-gnu/arch/arm/include/asm/thread_info.h
+++ linux-libre-6.1.44-gnu/arch/arm/include/asm/thread_info.h
@@ -128,15 +128,16 @@ extern int vfp_restore_user_hwstate(struct user_vfp *,
 #define TIF_NEED_RESCHED	1	/* rescheduling necessary */
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_UPROBE		3	/* breakpointed or singlestepping */
-#define TIF_SYSCALL_TRACE	4	/* syscall trace active */
-#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
-#define TIF_SYSCALL_TRACEPOINT	6	/* syscall tracepoint instrumentation */
-#define TIF_SECCOMP		7	/* seccomp syscall filtering active */
-#define TIF_NOTIFY_SIGNAL	8	/* signal notifications exist */
+#define TIF_NOTIFY_SIGNAL	4	/* signal notifications exist */
 
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	20
+#define TIF_RESTORE_SIGMASK	19
+#define TIF_SYSCALL_TRACE	20	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	21	/* syscall auditing active */
+#define TIF_SYSCALL_TRACEPOINT	22	/* syscall tracepoint instrumentation */
+#define TIF_SECCOMP		23	/* seccomp syscall filtering active */
+
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
diff --git linux-libre-6.1-gnu/arch/arm/kernel/bugs.c linux-libre-6.1.44-gnu/arch/arm/kernel/bugs.c
index 14c8dbbb7d2d..087bce6ec8e9 100644
--- linux-libre-6.1-gnu/arch/arm/kernel/bugs.c
+++ linux-libre-6.1.44-gnu/arch/arm/kernel/bugs.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/init.h>
+#include <linux/cpu.h>
 #include <asm/bugs.h>
 #include <asm/proc-fns.h>
 
@@ -11,7 +12,7 @@ void check_other_bugs(void)
 #endif
 }
 
-void __init check_bugs(void)
+void __init arch_cpu_finalize_init(void)
 {
 	check_writebuffer_bugs();
 	check_other_bugs();
diff --git linux-libre-6.1-gnu/arch/arm/kernel/unwind.c linux-libre-6.1.44-gnu/arch/arm/kernel/unwind.c
index a37ea6c772cd..2e6aa5dc15bf 100644
--- linux-libre-6.1-gnu/arch/arm/kernel/unwind.c
+++ linux-libre-6.1.44-gnu/arch/arm/kernel/unwind.c
@@ -307,6 +307,29 @@ static int unwind_exec_pop_subset_r0_to_r3(struct unwind_ctrl_block *ctrl,
 	return URC_OK;
 }
 
+static unsigned long unwind_decode_uleb128(struct unwind_ctrl_block *ctrl)
+{
+	unsigned long bytes = 0;
+	unsigned long insn;
+	unsigned long result = 0;
+
+	/*
+	 * unwind_get_byte() will advance `ctrl` one instruction at a time, so
+	 * loop until we get an instruction byte where bit 7 is not set.
+	 *
+	 * Note: This decodes a maximum of 4 bytes to output 28 bits data where
+	 * max is 0xfffffff: that will cover a vsp increment of 1073742336, hence
+	 * it is sufficient for unwinding the stack.
+	 */
+	do {
+		insn = unwind_get_byte(ctrl);
+		result |= (insn & 0x7f) << (bytes * 7);
+		bytes++;
+	} while (!!(insn & 0x80) && (bytes != sizeof(result)));
+
+	return result;
+}
+
 /*
  * Execute the current unwind instruction.
  */
@@ -360,7 +383,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 		if (ret)
 			goto error;
 	} else if (insn == 0xb2) {
-		unsigned long uleb128 = unwind_get_byte(ctrl);
+		unsigned long uleb128 = unwind_decode_uleb128(ctrl);
 
 		ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
 	} else {
diff --git linux-libre-6.1-gnu/arch/arm/lib/bitops.h linux-libre-6.1.44-gnu/arch/arm/lib/bitops.h
index 95bd35991288..f069d1b2318e 100644
--- linux-libre-6.1-gnu/arch/arm/lib/bitops.h
+++ linux-libre-6.1.44-gnu/arch/arm/lib/bitops.h
@@ -28,7 +28,7 @@ UNWIND(	.fnend		)
 ENDPROC(\name		)
 	.endm
 
-	.macro	testop, name, instr, store
+	.macro	__testop, name, instr, store, barrier
 ENTRY(	\name		)
 UNWIND(	.fnstart	)
 	ands	ip, r1, #3
@@ -38,7 +38,7 @@ UNWIND(	.fnstart	)
 	mov	r0, r0, lsr #5
 	add	r1, r1, r0, lsl #2	@ Get word offset
 	mov	r3, r2, lsl r3		@ create mask
-	smp_dmb
+	\barrier
 #if __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
 	.arch_extension	mp
 	ALT_SMP(W(pldw)	[r1])
@@ -50,13 +50,21 @@ UNWIND(	.fnstart	)
 	strex	ip, r2, [r1]
 	cmp	ip, #0
 	bne	1b
-	smp_dmb
+	\barrier
 	cmp	r0, #0
 	movne	r0, #1
 2:	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
 	.endm
+
+	.macro	testop, name, instr, store
+	__testop \name, \instr, \store, smp_dmb
+	.endm
+
+	.macro	sync_testop, name, instr, store
+	__testop \name, \instr, \store, __smp_dmb
+	.endm
 #else
 	.macro	bitop, name, instr
 ENTRY(	\name		)
diff --git linux-libre-6.1-gnu/arch/arm/lib/testchangebit.S linux-libre-6.1.44-gnu/arch/arm/lib/testchangebit.S
index 4ebecc67e6e0..f13fe9bc2399 100644
--- linux-libre-6.1-gnu/arch/arm/lib/testchangebit.S
+++ linux-libre-6.1.44-gnu/arch/arm/lib/testchangebit.S
@@ -10,3 +10,7 @@
                 .text
 
 testop	_test_and_change_bit, eor, str
+
+#if __LINUX_ARM_ARCH__ >= 6
+sync_testop	_sync_test_and_change_bit, eor, str
+#endif
diff --git linux-libre-6.1-gnu/arch/arm/lib/testclearbit.S linux-libre-6.1.44-gnu/arch/arm/lib/testclearbit.S
index 009afa0f5b4a..4d2c5ca620eb 100644
--- linux-libre-6.1-gnu/arch/arm/lib/testclearbit.S
+++ linux-libre-6.1.44-gnu/arch/arm/lib/testclearbit.S
@@ -10,3 +10,7 @@
                 .text
 
 testop	_test_and_clear_bit, bicne, strne
+
+#if __LINUX_ARM_ARCH__ >= 6
+sync_testop	_sync_test_and_clear_bit, bicne, strne
+#endif
diff --git linux-libre-6.1-gnu/arch/arm/lib/testsetbit.S linux-libre-6.1.44-gnu/arch/arm/lib/testsetbit.S
index f3192e55acc8..649dbab65d8d 100644
--- linux-libre-6.1-gnu/arch/arm/lib/testsetbit.S
+++ linux-libre-6.1.44-gnu/arch/arm/lib/testsetbit.S
@@ -10,3 +10,7 @@
                 .text
 
 testop	_test_and_set_bit, orreq, streq
+
+#if __LINUX_ARM_ARCH__ >= 6
+sync_testop	_sync_test_and_set_bit, orreq, streq
+#endif
diff --git linux-libre-6.1-gnu/arch/arm/lib/uaccess_with_memcpy.c linux-libre-6.1.44-gnu/arch/arm/lib/uaccess_with_memcpy.c
index 14eecaaf295f..e4c2677cc1e9 100644
--- linux-libre-6.1-gnu/arch/arm/lib/uaccess_with_memcpy.c
+++ linux-libre-6.1.44-gnu/arch/arm/lib/uaccess_with_memcpy.c
@@ -116,7 +116,7 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 			tocopy = n;
 
 		ua_flags = uaccess_save_and_enable();
-		memcpy((void *)to, from, tocopy);
+		__memcpy((void *)to, from, tocopy);
 		uaccess_restore(ua_flags);
 		to += tocopy;
 		from += tocopy;
@@ -178,7 +178,7 @@ __clear_user_memset(void __user *addr, unsigned long n)
 			tocopy = n;
 
 		ua_flags = uaccess_save_and_enable();
-		memset((void *)addr, 0, tocopy);
+		__memset((void *)addr, 0, tocopy);
 		uaccess_restore(ua_flags);
 		addr += tocopy;
 		n -= tocopy;
diff --git linux-libre-6.1-gnu/arch/arm/mach-at91/pm.c linux-libre-6.1.44-gnu/arch/arm/mach-at91/pm.c
index 60dc56d8acfb..437dd0352fd4 100644
--- linux-libre-6.1-gnu/arch/arm/mach-at91/pm.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-at91/pm.c
@@ -334,16 +334,14 @@ static bool at91_pm_eth_quirk_is_valid(struct at91_pm_quirk_eth *eth)
 		pdev = of_find_device_by_node(eth->np);
 		if (!pdev)
 			return false;
+		/* put_device(eth->dev) is called at the end of suspend. */
 		eth->dev = &pdev->dev;
 	}
 
 	/* No quirks if device isn't a wakeup source. */
-	if (!device_may_wakeup(eth->dev)) {
-		put_device(eth->dev);
+	if (!device_may_wakeup(eth->dev))
 		return false;
-	}
 
-	/* put_device(eth->dev) is called at the end of suspend. */
 	return true;
 }
 
@@ -439,14 +437,14 @@ clk_unconfigure:
 				pr_err("AT91: PM: failed to enable %s clocks\n",
 				       j == AT91_PM_G_ETH ? "geth" : "eth");
 			}
-		} else {
-			/*
-			 * Release the reference to eth->dev taken in
-			 * at91_pm_eth_quirk_is_valid().
-			 */
-			put_device(eth->dev);
-			eth->dev = NULL;
 		}
+
+		/*
+		 * Release the reference to eth->dev taken in
+		 * at91_pm_eth_quirk_is_valid().
+		 */
+		put_device(eth->dev);
+		eth->dev = NULL;
 	}
 
 	return ret;
diff --git linux-libre-6.1-gnu/arch/arm/mach-ep93xx/timer-ep93xx.c linux-libre-6.1.44-gnu/arch/arm/mach-ep93xx/timer-ep93xx.c
index dd4b164d1831..a9efa7bc2fa1 100644
--- linux-libre-6.1-gnu/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -9,6 +9,7 @@
 #include <linux/io.h>
 #include <asm/mach/time.h>
 #include "soc.h"
+#include "platform.h"
 
 /*************************************************************************
  * Timer handling for EP93xx
@@ -60,7 +61,7 @@ static u64 notrace ep93xx_read_sched_clock(void)
 	return ret;
 }
 
-u64 ep93xx_clocksource_read(struct clocksource *c)
+static u64 ep93xx_clocksource_read(struct clocksource *c)
 {
 	u64 ret;
 
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx25.c linux-libre-6.1.44-gnu/arch/arm/mach-imx/cpu-imx25.c
index 3e63445cde06..cc86977d0a34 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx25.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-imx/cpu-imx25.c
@@ -23,6 +23,7 @@ static int mx25_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 	rev = readl(iim_base + MXC_IIMSREV);
 	iounmap(iim_base);
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx27.c linux-libre-6.1.44-gnu/arch/arm/mach-imx/cpu-imx27.c
index bf70e13bbe9e..1d2893908368 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx27.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-imx/cpu-imx27.c
@@ -28,6 +28,7 @@ static int mx27_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
 	ccm_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!ccm_base);
 	/*
 	 * now we have access to the IO registers. As we need
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx31.c linux-libre-6.1.44-gnu/arch/arm/mach-imx/cpu-imx31.c
index b9c24b851d1a..35c544924e50 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx31.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-imx/cpu-imx31.c
@@ -39,6 +39,7 @@ static int mx31_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	/* read SREV register from IIM module */
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx35.c linux-libre-6.1.44-gnu/arch/arm/mach-imx/cpu-imx35.c
index 80e7d8ab9f1b..1fe75b39c2d9 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx35.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-imx/cpu-imx35.c
@@ -21,6 +21,7 @@ static int mx35_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	rev = imx_readl(iim_base + MXC_IIMSREV);
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx5.c linux-libre-6.1.44-gnu/arch/arm/mach-imx/cpu-imx5.c
index ad56263778f9..a67c89bf155d 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx5.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-imx/cpu-imx5.c
@@ -28,6 +28,7 @@ static u32 imx5_read_srev_reg(const char *compat)
 
 	np = of_find_compatible_node(NULL, NULL, compat);
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!iim_base);
 
 	srev = readl(iim_base + IIM_SREV) & 0xff;
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/mmdc.c linux-libre-6.1.44-gnu/arch/arm/mach-imx/mmdc.c
index af12668d0bf5..b9efe9da06e0 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/mmdc.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-imx/mmdc.c
@@ -99,6 +99,7 @@ struct mmdc_pmu {
 	cpumask_t cpu;
 	struct hrtimer hrtimer;
 	unsigned int active_events;
+	int id;
 	struct device *dev;
 	struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
 	struct hlist_node node;
@@ -433,8 +434,6 @@ static enum hrtimer_restart mmdc_pmu_timer_handler(struct hrtimer *hrtimer)
 static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		void __iomem *mmdc_base, struct device *dev)
 {
-	int mmdc_num;
-
 	*pmu_mmdc = (struct mmdc_pmu) {
 		.pmu = (struct pmu) {
 			.task_ctx_nr    = perf_invalid_context,
@@ -452,15 +451,16 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		.active_events = 0,
 	};
 
-	mmdc_num = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
+	pmu_mmdc->id = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
 
-	return mmdc_num;
+	return pmu_mmdc->id;
 }
 
 static int imx_mmdc_remove(struct platform_device *pdev)
 {
 	struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev);
 
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	perf_pmu_unregister(&pmu_mmdc->pmu);
 	iounmap(pmu_mmdc->mmdc_base);
@@ -474,7 +474,6 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 {
 	struct mmdc_pmu *pmu_mmdc;
 	char *name;
-	int mmdc_num;
 	int ret;
 	const struct of_device_id *of_id =
 		of_match_device(imx_mmdc_dt_ids, &pdev->dev);
@@ -497,14 +496,14 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 		cpuhp_mmdc_state = ret;
 	}
 
-	mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
-	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
-	if (mmdc_num == 0)
-		name = "mmdc";
-	else
-		name = devm_kasprintf(&pdev->dev,
-				GFP_KERNEL, "mmdc%d", mmdc_num);
+	ret = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
+	if (ret < 0)
+		goto  pmu_free;
 
+	name = devm_kasprintf(&pdev->dev,
+				GFP_KERNEL, "mmdc%d", ret);
+
+	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
 
 	hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
@@ -525,6 +524,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 
 pmu_register_err:
 	pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	hrtimer_cancel(&pmu_mmdc->hrtimer);
 pmu_free:
diff --git linux-libre-6.1-gnu/arch/arm/mach-mmp/time.c linux-libre-6.1.44-gnu/arch/arm/mach-mmp/time.c
index 41b2e8abc9e6..708816caf859 100644
--- linux-libre-6.1-gnu/arch/arm/mach-mmp/time.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-mmp/time.c
@@ -43,18 +43,21 @@
 static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
 
 /*
- * FIXME: the timer needs some delay to stablize the counter capture
+ * Read the timer through the CVWR register. Delay is required after requesting
+ * a read. The CR register cannot be directly read due to metastability issues
+ * documented in the PXA168 software manual.
  */
 static inline uint32_t timer_read(void)
 {
-	int delay = 100;
+	uint32_t val;
+	int delay = 3;
 
 	__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
 
 	while (delay--)
-		cpu_relax();
+		val = __raw_readl(mmp_timer_base + TMR_CVWR(1));
 
-	return __raw_readl(mmp_timer_base + TMR_CVWR(1));
+	return val;
 }
 
 static u64 notrace mmp_read_sched_clock(void)
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/Kconfig linux-libre-6.1.44-gnu/arch/arm/mach-omap1/Kconfig
index 538a960257cc..7ec7ada287e0 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/Kconfig
+++ linux-libre-6.1.44-gnu/arch/arm/mach-omap1/Kconfig
@@ -4,6 +4,7 @@ menuconfig ARCH_OMAP1
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
 	depends on ATAGS
+	select ARCH_OMAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
 	select CLKSRC_MMIO
@@ -45,10 +46,6 @@ config ARCH_OMAP16XX
 	select CPU_ARM926T
 	select OMAP_DM_TIMER
 
-config ARCH_OMAP1_ANY
-	select ARCH_OMAP
-	def_bool ARCH_OMAP730 || ARCH_OMAP850 || ARCH_OMAP15XX || ARCH_OMAP16XX
-
 config ARCH_OMAP
 	bool
 
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/Makefile linux-libre-6.1.44-gnu/arch/arm/mach-omap1/Makefile
index 506074b86333..0615cb0ba580 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/Makefile
+++ linux-libre-6.1.44-gnu/arch/arm/mach-omap1/Makefile
@@ -3,8 +3,6 @@
 # Makefile for the linux kernel.
 #
 
-ifdef CONFIG_ARCH_OMAP1_ANY
-
 # Common support
 obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
 	 serial.o devices.o dma.o omap-dma.o fb.o
@@ -59,5 +57,3 @@ obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
 obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
-
-endif
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/gpio15xx.c linux-libre-6.1.44-gnu/arch/arm/mach-omap1/gpio15xx.c
index c675f11de99d..61fa26efd865 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/gpio15xx.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-omap1/gpio15xx.c
@@ -11,6 +11,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/soc/ti/omap1-soc.h>
+#include <asm/irq.h>
 
 #include "irqs.h"
 
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/io.c linux-libre-6.1.44-gnu/arch/arm/mach-omap1/io.c
index d2db9b8aed3f..0074b011a05a 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/io.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-omap1/io.c
@@ -22,17 +22,14 @@
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
  */
-static struct map_desc omap_io_desc[] __initdata = {
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+static struct map_desc omap7xx_io_desc[] __initdata = {
 	{
 		.virtual	= OMAP1_IO_VIRT,
 		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
 		.length		= OMAP1_IO_SIZE,
 		.type		= MT_DEVICE
-	}
-};
-
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-static struct map_desc omap7xx_io_desc[] __initdata = {
+	},
 	{
 		.virtual	= OMAP7XX_DSP_BASE,
 		.pfn		= __phys_to_pfn(OMAP7XX_DSP_START),
@@ -49,6 +46,12 @@ static struct map_desc omap7xx_io_desc[] __initdata = {
 
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct map_desc omap1510_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP1_IO_VIRT,
+		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
+		.length		= OMAP1_IO_SIZE,
+		.type		= MT_DEVICE
+	},
 	{
 		.virtual	= OMAP1510_DSP_BASE,
 		.pfn		= __phys_to_pfn(OMAP1510_DSP_START),
@@ -65,6 +68,12 @@ static struct map_desc omap1510_io_desc[] __initdata = {
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 static struct map_desc omap16xx_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP1_IO_VIRT,
+		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
+		.length		= OMAP1_IO_SIZE,
+		.type		= MT_DEVICE
+	},
 	{
 		.virtual	= OMAP16XX_DSP_BASE,
 		.pfn		= __phys_to_pfn(OMAP16XX_DSP_START),
@@ -79,18 +88,9 @@ static struct map_desc omap16xx_io_desc[] __initdata = {
 };
 #endif
 
-/*
- * Maps common IO regions for omap1
- */
-static void __init omap1_map_common_io(void)
-{
-	iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
-}
-
 #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
 void __init omap7xx_map_io(void)
 {
-	omap1_map_common_io();
 	iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
 }
 #endif
@@ -98,7 +98,6 @@ void __init omap7xx_map_io(void)
 #ifdef CONFIG_ARCH_OMAP15XX
 void __init omap15xx_map_io(void)
 {
-	omap1_map_common_io();
 	iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
 }
 #endif
@@ -106,7 +105,6 @@ void __init omap15xx_map_io(void)
 #if defined(CONFIG_ARCH_OMAP16XX)
 void __init omap16xx_map_io(void)
 {
-	omap1_map_common_io();
 	iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
 }
 #endif
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/mcbsp.c linux-libre-6.1.44-gnu/arch/arm/mach-omap1/mcbsp.c
index 05c25c432449..b1632cbe37e6 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/mcbsp.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-omap1/mcbsp.c
@@ -89,7 +89,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 #define OMAP1610_MCBSP2_BASE	0xfffb1000
 #define OMAP1610_MCBSP3_BASE	0xe1017000
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 struct resource omap7xx_mcbsp_res[][6] = {
 	{
 		{
@@ -159,14 +158,7 @@ static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
 };
 #define OMAP7XX_MCBSP_RES_SZ		ARRAY_SIZE(omap7xx_mcbsp_res[1])
 #define OMAP7XX_MCBSP_COUNT		ARRAY_SIZE(omap7xx_mcbsp_res)
-#else
-#define omap7xx_mcbsp_res_0		NULL
-#define omap7xx_mcbsp_pdata		NULL
-#define OMAP7XX_MCBSP_RES_SZ		0
-#define OMAP7XX_MCBSP_COUNT		0
-#endif
 
-#ifdef CONFIG_ARCH_OMAP15XX
 struct resource omap15xx_mcbsp_res[][6] = {
 	{
 		{
@@ -266,14 +258,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 };
 #define OMAP15XX_MCBSP_RES_SZ		ARRAY_SIZE(omap15xx_mcbsp_res[1])
 #define OMAP15XX_MCBSP_COUNT		ARRAY_SIZE(omap15xx_mcbsp_res)
-#else
-#define omap15xx_mcbsp_res_0		NULL
-#define omap15xx_mcbsp_pdata		NULL
-#define OMAP15XX_MCBSP_RES_SZ		0
-#define OMAP15XX_MCBSP_COUNT		0
-#endif
 
-#ifdef CONFIG_ARCH_OMAP16XX
 struct resource omap16xx_mcbsp_res[][6] = {
 	{
 		{
@@ -373,12 +358,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 };
 #define OMAP16XX_MCBSP_RES_SZ		ARRAY_SIZE(omap16xx_mcbsp_res[1])
 #define OMAP16XX_MCBSP_COUNT		ARRAY_SIZE(omap16xx_mcbsp_res)
-#else
-#define omap16xx_mcbsp_res_0		NULL
-#define omap16xx_mcbsp_pdata		NULL
-#define OMAP16XX_MCBSP_RES_SZ		0
-#define OMAP16XX_MCBSP_COUNT		0
-#endif
 
 static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
 			struct omap_mcbsp_platform_data *config, int size)
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/pm.h linux-libre-6.1.44-gnu/arch/arm/mach-omap1/pm.h
index d9165709c532..0d1f092821ff 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/pm.h
+++ linux-libre-6.1.44-gnu/arch/arm/mach-omap1/pm.h
@@ -106,13 +106,6 @@
 #define OMAP7XX_IDLECT3		0xfffece24
 #define OMAP7XX_IDLE_LOOP_REQUEST	0x0C00
 
-#if     !defined(CONFIG_ARCH_OMAP730) && \
-	!defined(CONFIG_ARCH_OMAP850) && \
-	!defined(CONFIG_ARCH_OMAP15XX) && \
-	!defined(CONFIG_ARCH_OMAP16XX)
-#warning "Power management for this processor not implemented yet"
-#endif
-
 #ifndef __ASSEMBLER__
 
 #include <linux/clk.h>
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/timer.c linux-libre-6.1.44-gnu/arch/arm/mach-omap1/timer.c
index f5cd4bbf7566..81a912c1145a 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/timer.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-omap1/timer.c
@@ -158,7 +158,7 @@ err_free_pdata:
 	kfree(pdata);
 
 err_free_pdev:
-	platform_device_unregister(pdev);
+	platform_device_put(pdev);
 
 	return ret;
 }
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap2/board-generic.c linux-libre-6.1.44-gnu/arch/arm/mach-omap2/board-generic.c
index 1610c567a6a3..10d2f078e4a8 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap2/board-generic.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-omap2/board-generic.c
@@ -13,6 +13,7 @@
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap2/omap4-common.c linux-libre-6.1.44-gnu/arch/arm/mach-omap2/omap4-common.c
index 6d1eb4eefefe..d9ed2a5dcd5e 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap2/omap4-common.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-omap2/omap4-common.c
@@ -140,6 +140,7 @@ static int __init omap4_sram_init(void)
 			__func__);
 	else
 		sram_sync = (void __iomem *)gen_pool_alloc(sram_pool, PAGE_SIZE);
+	of_node_put(np);
 
 	return 0;
 }
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap2/timer.c linux-libre-6.1.44-gnu/arch/arm/mach-omap2/timer.c
index 620ba69c8f11..5677c4a08f37 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap2/timer.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-omap2/timer.c
@@ -76,6 +76,7 @@ static void __init realtime_counter_init(void)
 	}
 
 	rate = clk_get_rate(sys_clk);
+	clk_put(sys_clk);
 
 	if (soc_is_dra7xx()) {
 		/*
diff --git linux-libre-6.1-gnu/arch/arm/mach-orion5x/board-dt.c linux-libre-6.1.44-gnu/arch/arm/mach-orion5x/board-dt.c
index e3736ffc8347..be47492c6640 100644
--- linux-libre-6.1-gnu/arch/arm/mach-orion5x/board-dt.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-orion5x/board-dt.c
@@ -60,6 +60,9 @@ static void __init orion5x_dt_init(void)
 	if (of_machine_is_compatible("maxtor,shared-storage-2"))
 		mss2_init();
 
+	if (of_machine_is_compatible("lacie,d2-network"))
+		d2net_init();
+
 	of_platform_default_populate(NULL, orion5x_auxdata_lookup, NULL);
 }
 
diff --git linux-libre-6.1-gnu/arch/arm/mach-orion5x/common.h linux-libre-6.1.44-gnu/arch/arm/mach-orion5x/common.h
index eb96009e21c4..b9cfdb456456 100644
--- linux-libre-6.1-gnu/arch/arm/mach-orion5x/common.h
+++ linux-libre-6.1.44-gnu/arch/arm/mach-orion5x/common.h
@@ -75,6 +75,12 @@ extern void mss2_init(void);
 static inline void mss2_init(void) {}
 #endif
 
+#ifdef CONFIG_MACH_D2NET_DT
+void d2net_init(void);
+#else
+static inline void d2net_init(void) {}
+#endif
+
 /*****************************************************************************
  * Helpers to access Orion registers
  ****************************************************************************/
diff --git linux-libre-6.1-gnu/arch/arm/mach-s3c/s3c64xx.c linux-libre-6.1.44-gnu/arch/arm/mach-s3c/s3c64xx.c
index 0a8116c108fe..dce2b0e95308 100644
--- linux-libre-6.1-gnu/arch/arm/mach-s3c/s3c64xx.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-s3c/s3c64xx.c
@@ -173,7 +173,8 @@ static struct samsung_pwm_variant s3c64xx_pwm_variant = {
 	.tclk_mask	= (1 << 7) | (1 << 6) | (1 << 5),
 };
 
-void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
+void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
+				     enum s3c64xx_timer_mode source)
 {
 	s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
 	s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
diff --git linux-libre-6.1-gnu/arch/arm/mach-sa1100/jornada720_ssp.c linux-libre-6.1.44-gnu/arch/arm/mach-sa1100/jornada720_ssp.c
index 1dbe98948ce3..9627c4cf3e41 100644
--- linux-libre-6.1-gnu/arch/arm/mach-sa1100/jornada720_ssp.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
  *  arch/arm/mac-sa1100/jornada720_ssp.c
  *
  *  Copyright (C) 2006/2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
@@ -26,6 +26,7 @@ static unsigned long jornada_ssp_flags;
 
 /**
  * jornada_ssp_reverse - reverses input byte
+ * @byte: input byte to reverse
  *
  * we need to reverse all data we receive from the mcu due to its physical location
  * returns : 01110111 -> 11101110
@@ -46,6 +47,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse);
 
 /**
  * jornada_ssp_byte - waits for ready ssp bus and sends byte
+ * @byte: input byte to transmit
  *
  * waits for fifo buffer to clear and then transmits, if it doesn't then we will
  * timeout after <timeout> rounds. Needs mcu running before its called.
@@ -77,6 +79,7 @@ EXPORT_SYMBOL(jornada_ssp_byte);
 
 /**
  * jornada_ssp_inout - decide if input is command or trading byte
+ * @byte: input byte to send (may be %TXDUMMY)
  *
  * returns : (jornada_ssp_byte(byte)) on success
  *         : %-ETIMEDOUT on timeout failure
diff --git linux-libre-6.1-gnu/arch/arm/mach-zynq/slcr.c linux-libre-6.1.44-gnu/arch/arm/mach-zynq/slcr.c
index 37707614885a..9765b3f4c2fc 100644
--- linux-libre-6.1-gnu/arch/arm/mach-zynq/slcr.c
+++ linux-libre-6.1.44-gnu/arch/arm/mach-zynq/slcr.c
@@ -213,6 +213,7 @@ int __init zynq_early_slcr_init(void)
 	zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr");
 	if (IS_ERR(zynq_slcr_regmap)) {
 		pr_err("%s: failed to find zynq-slcr\n", __func__);
+		of_node_put(np);
 		return -ENODEV;
 	}
 
diff --git linux-libre-6.1-gnu/arch/arm/mm/fault.c linux-libre-6.1.44-gnu/arch/arm/mm/fault.c
index de988cba9a4b..b0db85310331 100644
--- linux-libre-6.1-gnu/arch/arm/mm/fault.c
+++ linux-libre-6.1.44-gnu/arch/arm/mm/fault.c
@@ -231,37 +231,11 @@ static inline bool is_permission_fault(unsigned int fsr)
 	return false;
 }
 
-static vm_fault_t __kprobes
-__do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int flags,
-		unsigned long vma_flags, struct pt_regs *regs)
-{
-	struct vm_area_struct *vma = find_vma(mm, addr);
-	if (unlikely(!vma))
-		return VM_FAULT_BADMAP;
-
-	if (unlikely(vma->vm_start > addr)) {
-		if (!(vma->vm_flags & VM_GROWSDOWN))
-			return VM_FAULT_BADMAP;
-		if (addr < FIRST_USER_ADDRESS)
-			return VM_FAULT_BADMAP;
-		if (expand_stack(vma, addr))
-			return VM_FAULT_BADMAP;
-	}
-
-	/*
-	 * ok, we have a good vm_area for this memory access, check the
-	 * permissions on the VMA allow for the fault which occurred.
-	 */
-	if (!(vma->vm_flags & vma_flags))
-		return VM_FAULT_BADACCESS;
-
-	return handle_mm_fault(vma, addr & PAGE_MASK, flags, regs);
-}
-
 static int __kprobes
 do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
 	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
 	int sig, code;
 	vm_fault_t fault;
 	unsigned int flags = FAULT_FLAG_DEFAULT;
@@ -300,31 +274,21 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
 
-	/*
-	 * As per x86, we may deadlock here.  However, since the kernel only
-	 * validly references user space from well defined areas of the code,
-	 * we can bug out early if this is from code which shouldn't.
-	 */
-	if (!mmap_read_trylock(mm)) {
-		if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
-			goto no_context;
 retry:
-		mmap_read_lock(mm);
-	} else {
-		/*
-		 * The above down_read_trylock() might have succeeded in
-		 * which case, we'll have missed the might_sleep() from
-		 * down_read()
-		 */
-		might_sleep();
-#ifdef CONFIG_DEBUG_VM
-		if (!user_mode(regs) &&
-		    !search_exception_tables(regs->ARM_pc))
-			goto no_context;
-#endif
+	vma = lock_mm_and_find_vma(mm, addr, regs);
+	if (unlikely(!vma)) {
+		fault = VM_FAULT_BADMAP;
+		goto bad_area;
 	}
 
-	fault = __do_page_fault(mm, addr, flags, vm_flags, regs);
+	/*
+	 * ok, we have a good vm_area for this memory access, check the
+	 * permissions on the VMA allow for the fault which occurred.
+	 */
+	if (!(vma->vm_flags & vm_flags))
+		fault = VM_FAULT_BADACCESS;
+	else
+		fault = handle_mm_fault(vma, addr & PAGE_MASK, flags, regs);
 
 	/* If we need to retry but a fatal signal is pending, handle the
 	 * signal first. We do not need to release the mmap_lock because
@@ -355,6 +319,7 @@ retry:
 	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
 		return 0;
 
+bad_area:
 	/*
 	 * If we are in kernel mode at this point, we
 	 * have no context to handle this fault with.
diff --git linux-libre-6.1-gnu/arch/arm/mm/nommu.c linux-libre-6.1.44-gnu/arch/arm/mm/nommu.c
index c1494a4dee25..53f2d8774fdb 100644
--- linux-libre-6.1-gnu/arch/arm/mm/nommu.c
+++ linux-libre-6.1.44-gnu/arch/arm/mm/nommu.c
@@ -161,7 +161,7 @@ void __init paging_init(const struct machine_desc *mdesc)
 	mpu_setup();
 
 	/* allocate the zero page. */
-	zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+	zero_page = (void *)memblock_alloc(PAGE_SIZE, PAGE_SIZE);
 	if (!zero_page)
 		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
 		      __func__, PAGE_SIZE, PAGE_SIZE);
diff --git linux-libre-6.1-gnu/arch/arm/nwfpe/Makefile linux-libre-6.1.44-gnu/arch/arm/nwfpe/Makefile
index 303400fa2cdf..2aec85ab1e8b 100644
--- linux-libre-6.1-gnu/arch/arm/nwfpe/Makefile
+++ linux-libre-6.1.44-gnu/arch/arm/nwfpe/Makefile
@@ -11,3 +11,9 @@ nwfpe-y				+= fpa11.o fpa11_cpdo.o fpa11_cpdt.o \
 				   entry.o
 
 nwfpe-$(CONFIG_FPE_NWFPE_XP)	+= extended_cpdo.o
+
+# Try really hard to avoid generating calls to __aeabi_uldivmod() from
+# float64_rem() due to loop elision.
+ifdef CONFIG_CC_IS_CLANG
+CFLAGS_softfloat.o	+= -mllvm -replexitval=never
+endif
diff --git linux-libre-6.1-gnu/arch/arm/probes/kprobes/checkers-common.c linux-libre-6.1.44-gnu/arch/arm/probes/kprobes/checkers-common.c
index 4d720990cf2a..eba7ac4725c0 100644
--- linux-libre-6.1-gnu/arch/arm/probes/kprobes/checkers-common.c
+++ linux-libre-6.1.44-gnu/arch/arm/probes/kprobes/checkers-common.c
@@ -40,7 +40,7 @@ enum probes_insn checker_stack_use_imm_0xx(probes_opcode_t insn,
  * Different from other insn uses imm8, the real addressing offset of
  * STRD in T32 encoding should be imm8 * 4. See ARMARM description.
  */
-enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn,
+static enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn,
 		struct arch_probes_insn *asi,
 		const struct decode_header *h)
 {
diff --git linux-libre-6.1-gnu/arch/arm/probes/kprobes/core.c linux-libre-6.1.44-gnu/arch/arm/probes/kprobes/core.c
index 9090c3a74dcc..d8238da095df 100644
--- linux-libre-6.1-gnu/arch/arm/probes/kprobes/core.c
+++ linux-libre-6.1.44-gnu/arch/arm/probes/kprobes/core.c
@@ -233,7 +233,7 @@ singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb)
  * kprobe, and that level is reserved for user kprobe handlers, so we can't
  * risk encountering a new kprobe in an interrupt handler.
  */
-void __kprobes kprobe_handler(struct pt_regs *regs)
+static void __kprobes kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *p, *cur;
 	struct kprobe_ctlblk *kcb;
diff --git linux-libre-6.1-gnu/arch/arm/probes/kprobes/opt-arm.c linux-libre-6.1.44-gnu/arch/arm/probes/kprobes/opt-arm.c
index dbef34ed933f..7f65048380ca 100644
--- linux-libre-6.1-gnu/arch/arm/probes/kprobes/opt-arm.c
+++ linux-libre-6.1.44-gnu/arch/arm/probes/kprobes/opt-arm.c
@@ -145,8 +145,6 @@ __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
 	}
 }
 
-extern void kprobe_handler(struct pt_regs *regs);
-
 static void
 optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
 {
diff --git linux-libre-6.1-gnu/arch/arm/probes/kprobes/test-core.c linux-libre-6.1.44-gnu/arch/arm/probes/kprobes/test-core.c
index c562832b8627..171c7076b89f 100644
--- linux-libre-6.1-gnu/arch/arm/probes/kprobes/test-core.c
+++ linux-libre-6.1.44-gnu/arch/arm/probes/kprobes/test-core.c
@@ -720,7 +720,7 @@ static const char coverage_register_lookup[16] = {
 	[REG_TYPE_NOSPPCX]	= COVERAGE_ANY_REG | COVERAGE_SP,
 };
 
-unsigned coverage_start_registers(const struct decode_header *h)
+static unsigned coverage_start_registers(const struct decode_header *h)
 {
 	unsigned regs = 0;
 	int i;
diff --git linux-libre-6.1-gnu/arch/arm/probes/kprobes/test-core.h linux-libre-6.1.44-gnu/arch/arm/probes/kprobes/test-core.h
index 56ad3c0aaeea..c7297037c162 100644
--- linux-libre-6.1-gnu/arch/arm/probes/kprobes/test-core.h
+++ linux-libre-6.1.44-gnu/arch/arm/probes/kprobes/test-core.h
@@ -454,3 +454,7 @@ void kprobe_thumb32_test_cases(void);
 #else
 void kprobe_arm_test_cases(void);
 #endif
+
+void __kprobes_test_case_start(void);
+void __kprobes_test_case_end_16(void);
+void __kprobes_test_case_end_32(void);
diff --git linux-libre-6.1-gnu/arch/arm64/Kconfig linux-libre-6.1.44-gnu/arch/arm64/Kconfig
index 505c8a1ccbe0..d5eb2fbab473 100644
--- linux-libre-6.1-gnu/arch/arm64/Kconfig
+++ linux-libre-6.1.44-gnu/arch/arm64/Kconfig
@@ -98,7 +98,6 @@ config ARM64
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
-	select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
 	select ARCH_WANT_LD_ORPHAN_WARN
 	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANTS_THP_SWAP if ARM64_4K_PAGES
@@ -212,6 +211,7 @@ config ARM64
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
 	select KASAN_VMALLOC if KASAN
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select NEED_DMA_MAP_STATE
 	select NEED_SG_DMA_LENGTH
@@ -376,6 +376,25 @@ menu "Kernel Features"
 
 menu "ARM errata workarounds via the alternatives framework"
 
+config AMPERE_ERRATUM_AC03_CPU_38
+        bool "AmpereOne: AC03_CPU_38: Certain bits in the Virtualization Translation Control Register and Translation Control Registers do not follow RES0 semantics"
+	default y
+	help
+	  This option adds an alternative code sequence to work around Ampere
+	  erratum AC03_CPU_38 on AmpereOne.
+
+	  The affected design reports FEAT_HAFDBS as not implemented in
+	  ID_AA64MMFR1_EL1.HAFDBS, but (V)TCR_ELx.{HA,HD} are not RES0
+	  as required by the architecture. The unadvertised HAFDBS
+	  implementation suffers from an additional erratum where hardware
+	  A/D updates can occur after a PTE has been marked invalid.
+
+	  The workaround forces KVM to explicitly set VTCR_EL2.HA to 0,
+	  which avoids enabling unadvertised hardware Access Flag management
+	  at stage-2.
+
+	  If unsure, say Y.
+
 config ARM64_WORKAROUND_CLEAN_CACHE
 	bool
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi linux-libre-6.1.44-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
index 5836b0030931..e1605a9b0a13 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -168,15 +168,15 @@
 		reg = <0x32 0x20>;
 	};
 
-	eth_mac: eth_mac@0 {
+	eth_mac: eth-mac@0 {
 		reg = <0x0 0x6>;
 	};
 
-	bt_mac: bt_mac@6 {
+	bt_mac: bt-mac@6 {
 		reg = <0x6 0x6>;
 	};
 
-	wifi_mac: wifi_mac@c {
+	wifi_mac: wifi-mac@c {
 		reg = <0xc 0x6>;
 	};
 
@@ -217,7 +217,7 @@
 	pinctrl-names = "default";
 
 	/* RTC */
-	pcf8563: pcf8563@51 {
+	pcf8563: rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 		status = "okay";
@@ -303,7 +303,7 @@
 
 &usb {
 	status = "okay";
-	phy-supply = <&usb_pwr>;
+	vbus-supply = <&usb_pwr>;
 };
 
 &spicc1 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi linux-libre-6.1.44-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 04f797b5a012..6cc685f91fc9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -152,7 +152,7 @@
 		scpi_clocks: clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: clock-controller {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>;
@@ -161,7 +161,7 @@
 		};
 
 		scpi_sensors: sensors {
-			compatible = "amlogic,meson-gxbb-scpi-sensors";
+			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
 			#thermal-sensor-cells = <1>;
 		};
 	};
@@ -1885,7 +1885,7 @@
 			sd_emmc_b: sd@5000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x5000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_B>,
 					<&clkc CLKID_SD_EMMC_B_CLK0>,
@@ -1897,7 +1897,7 @@
 			sd_emmc_c: mmc@7000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x7000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_C>,
 					<&clkc CLKID_SD_EMMC_C_CLK0>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi linux-libre-6.1.44-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 45947c1031c4..88b848c65b0d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ linux-libre-6.1.44-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1571,10 +1571,9 @@
 
 			dmc: bus@38000 {
 				compatible = "simple-bus";
-				reg = <0x0 0x38000 0x0 0x40