diff --git linux-libre-4.19-gnu1/Documentation/ABI/stable/sysfs-bus-vmbus linux-libre-4.19.305-gnu1/Documentation/ABI/stable/sysfs-bus-vmbus
index 3fed8fdb873d..c4ffdfc324b4 100644
--- linux-libre-4.19-gnu1/Documentation/ABI/stable/sysfs-bus-vmbus
+++ linux-libre-4.19.305-gnu1/Documentation/ABI/stable/sysfs-bus-vmbus
@@ -81,7 +81,9 @@ What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/latency
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
-Description:	Channel signaling latency
+Description:	Channel signaling latency. This file is available only for
+		performance critical channels (storage, network, etc.) that use
+		the monitor page mechanism.
 Users:		Debugging tools
 
 What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/out_mask
@@ -95,7 +97,9 @@ What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/pending
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
-Description:	Channel interrupt pending state
+Description:	Channel interrupt pending state. This file is available only for
+		performance critical channels (storage, network, etc.) that use
+		the monitor page mechanism.
 Users:		Debugging tools
 
 What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/read_avail
@@ -137,7 +141,9 @@ What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/monitor_id
 Date:		January. 2018
 KernelVersion:	4.16
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
-Description:	Monitor bit associated with channel
+Description:	Monitor bit associated with channel. This file is available only
+		for performance critical channels (storage, network, etc.) that
+		use the monitor page mechanism.
 Users:		Debugging tools and userspace drivers
 
 What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/ring
diff --git linux-libre-4.19-gnu1/Documentation/ABI/testing/evm linux-libre-4.19.305-gnu1/Documentation/ABI/testing/evm
index 201d10319fa1..1df1177df68a 100644
--- linux-libre-4.19-gnu1/Documentation/ABI/testing/evm
+++ linux-libre-4.19.305-gnu1/Documentation/ABI/testing/evm
@@ -42,8 +42,30 @@ Description:
 		modification of EVM-protected metadata and
 		disable all further modification of policy
 
-		Note that once a key has been loaded, it will no longer be
-		possible to enable metadata modification.
+		Echoing a value is additive, the new value is added to the
+		existing initialization flags.
+
+		For example, after::
+
+		  echo 2 ><securityfs>/evm
+
+		another echo can be performed::
+
+		  echo 1 ><securityfs>/evm
+
+		and the resulting value will be 3.
+
+		Note that once an HMAC key has been loaded, it will no longer
+		be possible to enable metadata modification. Signaling that an
+		HMAC key has been loaded will clear the corresponding flag.
+		For example, if the current value is 6 (2 and 4 set)::
+
+		  echo 1 ><securityfs>/evm
+
+		will set the new value to 3 (4 cleared).
+
+		Loading an HMAC key is the only way to disable metadata
+		modification.
 
 		Until key loading has been signaled EVM can not create
 		or validate the 'security.evm' xattr, but returns
diff --git linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-ata linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-ata
index 9ab0ef1dd1c7..299e0d1dc161 100644
--- linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-ata
+++ linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-ata
@@ -107,13 +107,14 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) Transfer modes supported by the device when
-				in PIO mode. Mostly used by PATA device.
+		pio_mode:	(RO) PIO transfer mode used by the device.
+				Mostly used by PATA devices.
 
-		xfer_mode:	(RO) Current transfer mode
+		xfer_mode:	(RO) Current transfer mode. Mostly used by
+				PATA devices.
 
-		dma_mode:	(RO) Transfer modes supported by the device when
-				in DMA mode. Mostly used by PATA device.
+		dma_mode:	(RO) DMA transfer mode used by the device.
+				Mostly used by PATA devices.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or
diff --git linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-bus-iio linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-bus-iio
index a5b4f223641d..b3adbb33a868 100644
--- linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-bus-iio
+++ linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-bus-iio
@@ -135,7 +135,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -199,7 +199,7 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw
-KernelVersion:	4.18
+KernelVersion:	4.19
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Relative position in direction x or y on a pad (may be
@@ -1559,7 +1559,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
 KernelVersion:	4.3
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Raw (unscaled no offset etc.) percentage reading of a substance.
+		Raw (unscaled no offset etc.) reading of a substance. Units
+		after application of scale and offset are percents.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistance_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw
diff --git linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610 linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610
index 308a6756d3bf..491ead804488 100644
--- linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610
+++ linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610
@@ -1,4 +1,4 @@
-What:		/sys/bus/iio/devices/iio:deviceX/conversion_mode
+What:		/sys/bus/iio/devices/iio:deviceX/in_conversion_mode
 KernelVersion:	4.2
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-bus-mei linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-bus-mei
index 6bd45346ac7e..3f8701e8fa24 100644
--- linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-bus-mei
+++ linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-bus-mei
@@ -4,7 +4,7 @@ KernelVersion:	3.10
 Contact:	Samuel Ortiz <sameo@linux.intel.com>
 		linux-mei@linux.intel.com
 Description:	Stores the same MODALIAS value emitted by uevent
-		Format: mei:<mei device name>:<device uuid>:
+		Format: mei:<mei device name>:<device uuid>:<protocol version>
 
 What:		/sys/bus/mei/devices/.../name
 Date:		May 2015
diff --git linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-class-devfreq linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-class-devfreq
index ee39acacf6f8..335595a79866 100644
--- linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-class-devfreq
+++ linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-class-devfreq
@@ -7,6 +7,13 @@ Description:
 		The name of devfreq object denoted as ... is same as the
 		name of device using devfreq.
 
+What:		/sys/class/devfreq/.../name
+Date:		November 2019
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq/.../name shows the name of device
+		of the corresponding devfreq object.
+
 What:		/sys/class/devfreq/.../governor
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
diff --git linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-class-net-qmi linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-class-net-qmi
index 7122d6264c49..c310db4ccbc2 100644
--- linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-class-net-qmi
+++ linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-class-net-qmi
@@ -29,7 +29,7 @@ Contact:	Bjørn Mork <bjorn@mork.no>
 Description:
 		Unsigned integer.
 
-		Write a number ranging from 1 to 127 to add a qmap mux
+		Write a number ranging from 1 to 254 to add a qmap mux
 		based network device, supported by recent Qualcomm based
 		modems.
 
@@ -46,5 +46,5 @@ Contact:	Bjørn Mork <bjorn@mork.no>
 Description:
 		Unsigned integer.
 
-		Write a number ranging from 1 to 127 to delete a previously
+		Write a number ranging from 1 to 254 to delete a previously
 		created qmap mux based network device.
diff --git linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu
index 73318225a368..a531b208902f 100644
--- linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -472,11 +472,17 @@ Description:	information about CPUs heterogeneity.
 		cpu_capacity: capacity of cpu#.
 
 What:		/sys/devices/system/cpu/vulnerabilities
+		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+		/sys/devices/system/cpu/vulnerabilities/l1tf
+		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
+		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
-		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
-		/sys/devices/system/cpu/vulnerabilities/l1tf
+		/sys/devices/system/cpu/vulnerabilities/srbds
+		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
@@ -489,8 +495,7 @@ Description:	Information about CPU vulnerabilities
 		"Vulnerable"	  CPU is affected and no mitigation in effect
 		"Mitigation: $M"  CPU is affected and mitigation $M is in effect
 
-		Details about the l1tf file can be found in
-		Documentation/admin-guide/l1tf.rst
+		See also: Documentation/admin-guide/hw-vuln/index.rst
 
 What:		/sys/devices/system/cpu/smt
 		/sys/devices/system/cpu/smt/active
diff --git linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-kernel-oops_count linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-kernel-oops_count
new file mode 100644
index 000000000000..156cca9dbc96
--- /dev/null
+++ linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-kernel-oops_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/oops_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Oopsed since last boot.
diff --git linux-libre-4.19-gnu1/Documentation/ABI/testing/sysfs-kernel-warn_count linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-kernel-warn_count
new file mode 100644
index 000000000000..90a029813717
--- /dev/null
+++ linux-libre-4.19.305-gnu1/Documentation/ABI/testing/sysfs-kernel-warn_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/warn_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Warned since last boot.
diff --git linux-libre-4.19-gnu1/Documentation/admin-guide/devices.txt linux-libre-4.19.305-gnu1/Documentation/admin-guide/devices.txt
index 1649117e6087..9cd7926c8781 100644
--- linux-libre-4.19-gnu1/Documentation/admin-guide/devices.txt
+++ linux-libre-4.19.305-gnu1/Documentation/admin-guide/devices.txt
@@ -2993,10 +2993,10 @@
 		65 = /dev/infiniband/issm1     Second InfiniBand IsSM device
 		  ...
 		127 = /dev/infiniband/issm63    63rd InfiniBand IsSM device
-		128 = /dev/infiniband/uverbs0   First InfiniBand verbs device
-		129 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
+		192 = /dev/infiniband/uverbs0   First InfiniBand verbs device
+		193 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
 		  ...
-		159 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
+		223 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
 
  232 char	Biometric Devices
 		0 = /dev/biometric/sensor0/fingerprint	first fingerprint sensor on first device
diff --git linux-libre-4.19-gnu1/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst linux-libre-4.19.305-gnu1/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
new file mode 100644
index 000000000000..264bfa937f7d
--- /dev/null
+++ linux-libre-4.19.305-gnu1/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
@@ -0,0 +1,109 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+GDS - Gather Data Sampling
+==========================
+
+Gather Data Sampling is a hardware vulnerability which allows unprivileged
+speculative access to data which was previously stored in vector registers.
+
+Problem
+-------
+When a gather instruction performs loads from memory, different data elements
+are merged into the destination vector register. However, when a gather
+instruction that is transiently executed encounters a fault, stale data from
+architectural or internal vector registers may get transiently forwarded to the
+destination vector register instead. This will allow a malicious attacker to
+infer stale data using typical side channel techniques like cache timing
+attacks. GDS is a purely sampling-based attack.
+
+The attacker uses gather instructions to infer the stale vector register data.
+The victim does not need to do anything special other than use the vector
+registers. The victim does not need to use gather instructions to be
+vulnerable.
+
+Because the buffers are shared between Hyper-Threads cross Hyper-Thread attacks
+are possible.
+
+Attack scenarios
+----------------
+Without mitigation, GDS can infer stale data across virtually all
+permission boundaries:
+
+	Non-enclaves can infer SGX enclave data
+	Userspace can infer kernel data
+	Guests can infer data from hosts
+	Guest can infer guest from other guests
+	Users can infer data from other users
+
+Because of this, it is important to ensure that the mitigation stays enabled in
+lower-privilege contexts like guests and when running outside SGX enclaves.
+
+The hardware enforces the mitigation for SGX. Likewise, VMMs should  ensure
+that guests are not allowed to disable the GDS mitigation. If a host erred and
+allowed this, a guest could theoretically disable GDS mitigation, mount an
+attack, and re-enable it.
+
+Mitigation mechanism
+--------------------
+This issue is mitigated in microcode. The microcode defines the following new
+bits:
+
+ ================================   ===   ============================
+ IA32_ARCH_CAPABILITIES[GDS_CTRL]   R/O   Enumerates GDS vulnerability
+                                          and mitigation support.
+ IA32_ARCH_CAPABILITIES[GDS_NO]     R/O   Processor is not vulnerable.
+ IA32_MCU_OPT_CTRL[GDS_MITG_DIS]    R/W   Disables the mitigation
+                                          0 by default.
+ IA32_MCU_OPT_CTRL[GDS_MITG_LOCK]   R/W   Locks GDS_MITG_DIS=0. Writes
+                                          to GDS_MITG_DIS are ignored
+                                          Can't be cleared once set.
+ ================================   ===   ============================
+
+GDS can also be mitigated on systems that don't have updated microcode by
+disabling AVX. This can be done by setting gather_data_sampling="force" or
+"clearcpuid=avx" on the kernel command-line.
+
+If used, these options will disable AVX use by turning off XSAVE YMM support.
+However, the processor will still enumerate AVX support.  Userspace that
+does not follow proper AVX enumeration to check both AVX *and* XSAVE YMM
+support will break.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The mitigation can be disabled by setting "gather_data_sampling=off" or
+"mitigations=off" on the kernel command line. Not specifying either will default
+to the mitigation being enabled. Specifying "gather_data_sampling=force" will
+use the microcode mitigation when available or disable AVX on affected systems
+where the microcode hasn't been updated to include the mitigation.
+
+GDS System Information
+------------------------
+The kernel provides vulnerability status information through sysfs. For
+GDS this can be accessed by the following sysfs file:
+
+/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+
+The possible values contained in this file are:
+
+ ============================== =============================================
+ Not affected                   Processor not vulnerable.
+ Vulnerable                     Processor vulnerable and mitigation disabled.
+ Vulnerable: No microcode       Processor vulnerable and microcode is missing
+                                mitigation.
+ Mitigation: AVX disabled,
+ no microcode                   Processor is vulnerable and microcode is missing
+                                mitigation. AVX disabled as mitigation.
+ Mitigation: Microcode          Processor is vulnerable and mitigation is in
+                                effect.
+ Mitigation: Microcode (locked) Processor is vulnerable and mitigation is in
+                                effect and cannot be disabled.
+ Unknown: Dependent on
+ hypervisor status              Running on a virtual guest processor that is
+                                affected but with no way to know if host
+                                processor is mitigated or vulnerable.
+ ============================== =============================================
+
+GDS Default mitigation
+----------------------
+The updated microcode will enable the mitigation by default. The kernel's
+default action is to leave the mitigation enabled.
diff --git linux-libre-4.19-gnu1/Documentation/admin-guide/hw-vuln/index.rst linux-libre-4.19.305-gnu1/Documentation/admin-guide/hw-vuln/index.rst
new file mode 100644
index 000000000000..245468b0f2be
--- /dev/null
+++ linux-libre-4.19.305-gnu1/Documentation/admin-guide/hw-vuln/index.rst
@@ -0,0 +1,19 @@
+========================
+Hardware vulnerabilities
+========================
+
+This section describes CPU vulnerabilities and provides an overview of the
+possible mitigations along with guidance for selecting mitigations if they
+are configurable at compile, boot or run time.
+
+.. toctree::
+   :maxdepth: 1
+
+   spectre
+   l1tf
+   mds
+   tsx_async_abort
+   multihit.rst
+   special-register-buffer-data-sampling.rst
+   processor_mmio_stale_data.rst
+   gather_data_sampling.rst
diff --git linux-libre-4.19-gnu1/Documentation/admin-guide/l1tf.rst linux-libre-4.19.305-gnu1/Documentation/admin-guide/hw-vuln/l1tf.rst
similarity index 99%
rename from Documentation/admin-guide/l1tf.rst
rename to Documentation/admin-guide/hw-vuln/l1tf.rst
index bae52b845de0..31653a9f0e1b 100644
--- linux-libre-4.19-gnu1/Documentation/admin-guide/l1tf.rst
+++ linux-libre-4.19.305-gnu1/Documentation/admin-guide/hw-vuln/l1tf.rst
@@ -405,6 +405,9 @@ time with the option "l1tf=". The valid arguments for this option are:
 
   off		Disables hypervisor mitigations and doesn't emit any
 		warnings.
+		It also drops the swap size and available RAM limit restrictions
+		on both hypervisor and bare metal.
+
   ============  =============================================================
 
 The default is 'flush'. For details about L1D flushing see :ref:`l1d_flush`.
@@ -442,6 +445,7 @@ The default is 'cond'. If 'l1tf=full,force' is given on the kernel command
 line, then 'always' is enforced and the kvm-intel.vmentry_l1d_flush
 module parameter is ignored and writes to the sysfs file are rejected.
 
+.. _mitigation_selection:
 
 Mitigation selection guide
 --------------------------
@@ -553,7 +557,7 @@ When nested virtualization is in use, three operating systems are involved:
 the bare metal hypervisor, the nested hypervisor and the nested virtual
 machine.  VMENTER operations from the nested hypervisor into the nested
 guest will always be processed by the bare metal hypervisor. If KVM is the
-bare metal hypervisor it wiil:
+bare metal hypervisor it will:
 
  - Flush the L1D cache on every switch from the nested hypervisor to the
    nested virtual machine, so that the nested hypervisor's secrets are not
@@ -576,7 +580,8 @@ Default mitigations
   The kernel default mitigations for vulnerable processors are:
 
   - PTE inversion to protect against malicious user space. This is done
-    unconditionally and cannot be controlled.
+    unconditionally and cannot be controlled. The swap storage is limited
+    to ~16TB.
 
   - L1D conditional flushing on VMENTER when EPT is enabled for
     a guest.
diff --git linux-libre-4.19-gnu1/Documentation/admin-guide/hw-vuln/mds.rst linux-libre-4.19.305-gnu1/Documentation/admin-guide/hw-vuln/mds.rst
new file mode 100644
index 000000000000..2d19c9f4c1fe
--- /dev/null
+++ linux-libre-4.19.305-gnu1/Documentation/admin-guide/hw-vuln/mds.rst
@@ -0,0 +1,311 @@
+MDS - Microarchitectural Data Sampling
+======================================
+
+Microarchitectural Data Sampling is a hardware vulnerability which allows
+unprivileged speculative access to data which is available in various CPU
+internal buffers.
+
+Affected processors
+-------------------
+
+This vulnerability affects a wide range of Intel processors. The
+vulnerability is not present on:
+
+   - Processors from AMD, Centaur and other non Intel vendors
+
+   - Older processor models, where the CPU family is < 6
+
+   - Some Atoms (Bonnell, Saltwell, Goldmont, GoldmontPlus)
+
+   - Intel processors which have the ARCH_CAP_MDS_NO bit set in the
+     IA32_ARCH_CAPABILITIES MSR.
+
+Whether a processor is affected or not can be read out from the MDS
+vulnerability file in sysfs. See :ref:`mds_sys_info`.
+
+Not all processors are affected by all variants of MDS, but the mitigation
+is identical for all of them so the kernel treats them as a single
+vulnerability.
+
+Related CVEs
+------------
+
+The following CVE entries are related to the MDS vulnerability:
+
+   ==============  =====  ===================================================
+   CVE-2018-12126  MSBDS  Microarchitectural Store Buffer Data Sampling
+   CVE-2018-12130  MFBDS  Microarchitectural Fill Buffer Data Sampling
+   CVE-2018-12127  MLPDS  Microarchitectural Load Port Data Sampling
+   CVE-2019-11091  MDSUM  Microarchitectural Data Sampling Uncacheable Memory
+   ==============  =====  ===================================================
+
+Problem
+-------
+
+When performing store, load, L1 refill operations, processors write data
+into temporary microarchitectural structures (buffers). The data in the
+buffer can be forwarded to load operations as an optimization.
+
+Under certain conditions, usually a fault/assist caused by a load
+operation, data unrelated to the load memory address can be speculatively
+forwarded from the buffers. Because the load operation causes a fault or
+assist and its result will be discarded, the forwarded data will not cause
+incorrect program execution or state changes. But a malicious operation
+may be able to forward this speculative data to a disclosure gadget which
+allows in turn to infer the value via a cache side channel attack.
+
+Because the buffers are potentially shared between Hyper-Threads cross
+Hyper-Thread attacks are possible.
+
+Deeper technical information is available in the MDS specific x86
+architecture section: :ref:`Documentation/x86/mds.rst <mds>`.
+
+
+Attack scenarios
+----------------
+
+Attacks against the MDS vulnerabilities can be mounted from malicious non
+priviledged user space applications running on hosts or guest. Malicious
+guest OSes can obviously mount attacks as well.
+
+Contrary to other speculation based vulnerabilities the MDS vulnerability
+does not allow the attacker to control the memory target address. As a
+consequence the attacks are purely sampling based, but as demonstrated with
+the TLBleed attack samples can be postprocessed successfully.
+
+Web-Browsers
+^^^^^^^^^^^^
+
+  It's unclear whether attacks through Web-Browsers are possible at
+  all. The exploitation through Java-Script is considered very unlikely,
+  but other widely used web technologies like Webassembly could possibly be
+  abused.
+
+
+.. _mds_sys_info:
+
+MDS system information
+-----------------------
+
+The Linux kernel provides a sysfs interface to enumerate the current MDS
+status of the system: whether the system is vulnerable, and which
+mitigations are active. The relevant sysfs file is:
+
+/sys/devices/system/cpu/vulnerabilities/mds
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
+       - The processor is vulnerable but microcode is not updated.
+
+         The mitigation is enabled on a best effort basis. See :ref:`vmwerv`
+     * - 'Mitigation: Clear CPU buffers'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+         enabled.
+
+If the processor is vulnerable then the following information is appended
+to the above information:
+
+    ========================  ============================================
+    'SMT vulnerable'          SMT is enabled
+    'SMT mitigated'           SMT is enabled and mitigated
+    'SMT disabled'            SMT is disabled
+    'SMT Host state unknown'  Kernel runs in a VM, Host SMT state unknown
+    ========================  ============================================
+
+.. _vmwerv:
+
+Best effort mitigation mode
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  If the processor is vulnerable, but the availability of the microcode based
+  mitigation mechanism is not advertised via CPUID the kernel selects a best
+  effort mitigation mode.  This mode invokes the mitigation instructions
+  without a guarantee that they clear the CPU buffers.
+
+  This is done to address virtualization scenarios where the host has the
+  microcode update applied, but the hypervisor is not yet updated to expose
+  the CPUID to the guest. If the host has updated microcode the protection
+  takes effect otherwise a few cpu cycles are wasted pointlessly.
+
+  The state in the mds sysfs file reflects this situation accordingly.
+
+
+Mitigation mechanism
+-------------------------
+
+The kernel detects the affected CPUs and the presence of the microcode
+which is required.
+
+If a CPU is affected and the microcode is available, then the kernel
+enables the mitigation by default. The mitigation can be controlled at boot
+time via a kernel command line option. See
+:ref:`mds_mitigation_control_command_line`.
+
+.. _cpu_buffer_clear:
+
+CPU buffer clearing
+^^^^^^^^^^^^^^^^^^^
+
+  The mitigation for MDS clears the affected CPU buffers on return to user
+  space and when entering a guest.
+
+  If SMT is enabled it also clears the buffers on idle entry when the CPU
+  is only affected by MSBDS and not any other MDS variant, because the
+  other variants cannot be protected against cross Hyper-Thread attacks.
+
+  For CPUs which are only affected by MSBDS the user space, guest and idle
+  transition mitigations are sufficient and SMT is not affected.
+
+.. _virt_mechanism:
+
+Virtualization mitigation
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  The protection for host to guest transition depends on the L1TF
+  vulnerability of the CPU:
+
+  - CPU is affected by L1TF:
+
+    If the L1D flush mitigation is enabled and up to date microcode is
+    available, the L1D flush mitigation is automatically protecting the
+    guest transition.
+
+    If the L1D flush mitigation is disabled then the MDS mitigation is
+    invoked explicit when the host MDS mitigation is enabled.
+
+    For details on L1TF and virtualization see:
+    :ref:`Documentation/admin-guide/hw-vuln//l1tf.rst <mitigation_control_kvm>`.
+
+  - CPU is not affected by L1TF:
+
+    CPU buffers are flushed before entering the guest when the host MDS
+    mitigation is enabled.
+
+  The resulting MDS protection matrix for the host to guest transition:
+
+  ============ ===== ============= ============ =================
+   L1TF         MDS   VMX-L1FLUSH   Host MDS     MDS-State
+
+   Don't care   No    Don't care    N/A          Not affected
+
+   Yes          Yes   Disabled      Off          Vulnerable
+
+   Yes          Yes   Disabled      Full         Mitigated
+
+   Yes          Yes   Enabled       Don't care   Mitigated
+
+   No           Yes   N/A           Off          Vulnerable
+
+   No           Yes   N/A           Full         Mitigated
+  ============ ===== ============= ============ =================
+
+  This only covers the host to guest transition, i.e. prevents leakage from
+  host to guest, but does not protect the guest internally. Guests need to
+  have their own protections.
+
+.. _xeon_phi:
+
+XEON PHI specific considerations
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  The XEON PHI processor family is affected by MSBDS which can be exploited
+  cross Hyper-Threads when entering idle states. Some XEON PHI variants allow
+  to use MWAIT in user space (Ring 3) which opens an potential attack vector
+  for malicious user space. The exposure can be disabled on the kernel
+  command line with the 'ring3mwait=disable' command line option.
+
+  XEON PHI is not affected by the other MDS variants and MSBDS is mitigated
+  before the CPU enters a idle state. As XEON PHI is not affected by L1TF
+  either disabling SMT is not required for full protection.
+
+.. _mds_smt_control:
+
+SMT control
+^^^^^^^^^^^
+
+  All MDS variants except MSBDS can be attacked cross Hyper-Threads. That
+  means on CPUs which are affected by MFBDS or MLPDS it is necessary to
+  disable SMT for full protection. These are most of the affected CPUs; the
+  exception is XEON PHI, see :ref:`xeon_phi`.
+
+  Disabling SMT can have a significant performance impact, but the impact
+  depends on the type of workloads.
+
+  See the relevant chapter in the L1TF mitigation documentation for details:
+  :ref:`Documentation/admin-guide/hw-vuln/l1tf.rst <smt_control>`.
+
+
+.. _mds_mitigation_control_command_line:
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+The kernel command line allows to control the MDS mitigations at boot
+time with the option "mds=". The valid arguments for this option are:
+
+  ============  =============================================================
+  full		If the CPU is vulnerable, enable all available mitigations
+		for the MDS vulnerability, CPU buffer clearing on exit to
+		userspace and when entering a VM. Idle transitions are
+		protected as well if SMT is enabled.
+
+		It does not automatically disable SMT.
+
+  full,nosmt	The same as mds=full, with SMT disabled on vulnerable
+		CPUs.  This is the complete mitigation.
+
+  off		Disables MDS mitigations completely.
+
+  ============  =============================================================
+
+Not specifying this option is equivalent to "mds=full". For processors
+that are affected by both TAA (TSX Asynchronous Abort) and MDS,
+specifying just "mds=off" without an accompanying "tsx_async_abort=off"
+will have no effect as the same mitigation is used for both
+vulnerabilities.
+
+Mitigation selection guide
+--------------------------
+
+1. Trusted userspace
+^^^^^^^^^^^^^^^^^^^^
+
+   If all userspace applications are from a trusted source and do not
+   execute untrusted code which is supplied externally, then the mitigation
+   can be disabled.
+
+
+2. Virtualization with trusted guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   The same considerations as above versus trusted user space apply.
+
+3. Virtualization with untrusted guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   The protection depends on the state of the L1TF mitigations.
+   See :ref:`virt_mechanism`.
+
+   If the MDS mitigation is enabled and SMT is disabled, guest to host and
+   guest to guest attacks are prevented.
+
+.. _mds_default_mitigations:
+
+Default mitigations
+-------------------
+
+  The kernel default mitigations for vulnerable processors are:
+
+  - Enable CPU buffer clearing
+
+  The kernel does not by default enforce the disabling of SMT, which leaves
+  SMT systems vulnerable when running untrusted code. The same rationale as
+  for L1TF applies.
+  See :ref:`Documentation/admin-guide/hw-vuln//l1tf.rst <default_mitigations>`.
diff --git linux-libre-4.19-gnu1/Documentation/admin-guide/hw-vuln/multihit.rst linux-libre-4.19.305-gnu1/Documentation/admin-guide/hw-vuln/multihit.rst
new file mode 100644
index 000000000000..ba9988d8bce5
--- /dev/null
+++ linux-libre-4.19.305-gnu1/Documentation/admin-guide/hw-vuln/multihit.rst
@@ -0,0 +1,163 @@
+iTLB multihit
+=============
+
+iTLB multihit is an erratum where some processors may incur a machine check
+error, possibly resulting in an unrecoverable CPU lockup, when an
+instruction fetch hits multiple entries in the instruction TLB. This can
+occur when the page size is changed along with either the physical address
+or cache type. A malicious guest running on a virtualized system can
+exploit this erratum to perform a denial of service attack.
+
+
+Affected processors
+-------------------
+
+Variations of this erratum are present on most Intel Core and Xeon processor
+models. The erratum is not present on:
+
+   - non-Intel processors
+
+   - Some Atoms (Airmont, Bonnell, Goldmont, GoldmontPlus, Saltwell, Silvermont)
+
+   - Intel processors that have the PSCHANGE_MC_NO bit set in the
+     IA32_ARCH_CAPABILITIES MSR.
+
+
+Related CVEs
+------------
+
+The following CVE entry is related to this issue:
+
+   ==============  =================================================
+   CVE-2018-12207  Machine Check Error Avoidance on Page Size Change
+   ==============  =================================================
+
+
+Problem
+-------
+
+Privileged software, including OS and virtual machine managers (VMM), are in
+charge of memory management. A key component in memory management is the control
+of the page tables. Modern processors use virtual memory, a technique that creates
+the illusion of a very large memory for processors. This virtual space is split
+into pages of a given size. Page tables translate virtual addresses to physical
+addresses.
+
+To reduce latency when performing a virtual to physical address translation,
+processors include a structure, called TLB, that caches recent translations.
+There are separate TLBs for instruction (iTLB) and data (dTLB).
+
+Under this errata, instructions are fetched from a linear address translated
+using a 4 KB translation cached in the iTLB. Privileged software modifies the
+paging structure so that the same linear address using large page size (2 MB, 4
+MB, 1 GB) with a different physical address or memory type.  After the page
+structure modification but before the software invalidates any iTLB entries for
+the linear address, a code fetch that happens on the same linear address may
+cause a machine-check error which can result in a system hang or shutdown.
+
+
+Attack scenarios
+----------------
+
+Attacks against the iTLB multihit erratum can be mounted from malicious
+guests in a virtualized system.
+
+
+iTLB multihit system information
+--------------------------------
+
+The Linux kernel provides a sysfs interface to enumerate the current iTLB
+multihit status of the system:whether the system is vulnerable and which
+mitigations are active. The relevant sysfs file is:
+
+/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+
+The possible values in this file are:
+
+.. list-table::
+
+     * - Not affected
+       - The processor is not vulnerable.
+     * - KVM: Mitigation: Split huge pages
+       - Software changes mitigate this issue.
+     * - KVM: Vulnerable
+       - The processor is vulnerable, but no mitigation enabled
+
+
+Enumeration of the erratum
+--------------------------------
+
+A new bit has been allocated in the IA32_ARCH_CAPABILITIES (PSCHANGE_MC_NO) msr
+and will be set on CPU's which are mitigated against this issue.
+
+   =======================================   ===========   ===============================
+   IA32_ARCH_CAPABILITIES MSR                Not present   Possibly vulnerable,check model
+   IA32_ARCH_CAPABILITIES[PSCHANGE_MC_NO]    '0'           Likely vulnerable,check model
+   IA32_ARCH_CAPABILITIES[PSCHANGE_MC_NO]    '1'           Not vulnerable
+   =======================================   ===========   ===============================
+
+
+Mitigation mechanism
+-------------------------
+
+This erratum can be mitigated by restricting the use of large page sizes to
+non-executable pages.  This forces all iTLB entries to be 4K, and removes
+the possibility of multiple hits.
+
+In order to mitigate the vulnerability, KVM initially marks all huge pages
+as non-executable. If the guest attempts to execute in one of those pages,
+the page is broken down into 4K pages, which are then marked executable.
+
+If EPT is disabled or not available on the host, KVM is in control of TLB
+flushes and the problematic situation cannot happen.  However, the shadow
+EPT paging mechanism used by nested virtualization is vulnerable, because
+the nested guest can trigger multiple iTLB hits by modifying its own
+(non-nested) page tables.  For simplicity, KVM will make large pages
+non-executable in all shadow paging modes.
+
+Mitigation control on the kernel command line and KVM - module parameter
+------------------------------------------------------------------------
+
+The KVM hypervisor mitigation mechanism for marking huge pages as
+non-executable can be controlled with a module parameter "nx_huge_pages=".
+The kernel command line allows to control the iTLB multihit mitigations at
+boot time with the option "kvm.nx_huge_pages=".
+
+The valid arguments for these options are:
+
+  ==========  ================================================================
+  force       Mitigation is enabled. In this case, the mitigation implements
+              non-executable huge pages in Linux kernel KVM module. All huge
+              pages in the EPT are marked as non-executable.
+              If a guest attempts to execute in one of those pages, the page is
+              broken down into 4K pages, which are then marked executable.
+
+  off	      Mitigation is disabled.
+
+  auto        Enable mitigation only if the platform is affected and the kernel
+              was not booted with the "mitigations=off" command line parameter.
+	      This is the default option.
+  ==========  ================================================================
+
+
+Mitigation selection guide
+--------------------------
+
+1. No virtualization in use
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   The system is protected by the kernel unconditionally and no further
+   action is required.
+
+2. Virtualization with trusted guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   If the guest comes from a trusted source, you may assume that the guest will
+   not attempt to maliciously exploit these errata and no further action is
+   required.
+
+3. Virtualization with untrusted guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+   If the guest comes from an untrusted source, the guest host kernel will need
+   to apply iTLB multihit mitigation via the kernel command line or kvm
+   module parameter.
diff --git linux-libre-4.19-gnu1/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst linux-libre-4.19.305-gnu1/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
new file mode 100644
index 000000000000..c98fd11907cc
--- /dev/null
+++ linux-libre-4.19.305-gnu1/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -0,0 +1,260 @@
+=========================================
+Processor MMIO Stale Data Vulnerabilities
+=========================================
+
+Processor MMIO Stale Data Vulnerabilities are a class of memory-mapped I/O
+(MMIO) vulnerabilities that can expose data. The sequences of operations for
+exposing data range from simple to very complex. Because most of the
+vulnerabilities require the attacker to have access to MMIO, many environments
+are not affected. System environments using virtualization where MMIO access is
+provided to untrusted guests may need mitigation. These vulnerabilities are
+not transient execution attacks. However, these vulnerabilities may propagate
+stale data into core fill buffers where the data can subsequently be inferred
+by an unmitigated transient execution attack. Mitigation for these
+vulnerabilities includes a combination of microcode update and software
+changes, depending on the platform and usage model. Some of these mitigations
+are similar to those used to mitigate Microarchitectural Data Sampling (MDS) or
+those used to mitigate Special Register Buffer Data Sampling (SRBDS).
+
+Data Propagators
+================
+Propagators are operations that result in stale data being copied or moved from
+one microarchitectural buffer or register to another. Processor MMIO Stale Data
+Vulnerabilities are operations that may result in stale data being directly
+read into an architectural, software-visible state or sampled from a buffer or
+register.
+
+Fill Buffer Stale Data Propagator (FBSDP)
+-----------------------------------------
+Stale data may propagate from fill buffers (FB) into the non-coherent portion
+of the uncore on some non-coherent writes. Fill buffer propagation by itself
+does not make stale data architecturally visible. Stale data must be propagated
+to a location where it is subject to reading or sampling.
+
+Sideband Stale Data Propagator (SSDP)
+-------------------------------------
+The sideband stale data propagator (SSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. The sideband response buffer is
+shared by all client cores. For non-coherent reads that go to sideband
+destinations, the uncore logic returns 64 bytes of data to the core, including
+both requested data and unrequested stale data, from a transaction buffer and
+the sideband response buffer. As a result, stale data from the sideband
+response and transaction buffers may now reside in a core fill buffer.
+
+Primary Stale Data Propagator (PSDP)
+------------------------------------
+The primary stale data propagator (PSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. Similar to the sideband response
+buffer, the primary response buffer is shared by all client cores. For some
+processors, MMIO primary reads will return 64 bytes of data to the core fill
+buffer including both requested data and unrequested stale data. This is
+similar to the sideband stale data propagator.
+
+Vulnerabilities
+===============
+Device Register Partial Write (DRPW) (CVE-2022-21166)
+-----------------------------------------------------
+Some endpoint MMIO registers incorrectly handle writes that are smaller than
+the register size. Instead of aborting the write or only copying the correct
+subset of bytes (for example, 2 bytes for a 2-byte write), more bytes than
+specified by the write transaction may be written to the register. On
+processors affected by FBSDP, this may expose stale data from the fill buffers
+of the core that created the write transaction.
+
+Shared Buffers Data Sampling (SBDS) (CVE-2022-21125)
+----------------------------------------------------
+After propagators may have moved data around the uncore and copied stale data
+into client core fill buffers, processors affected by MFBDS can leak data from
+the fill buffer. It is limited to the client (including Intel Xeon server E3)
+uncore implementation.
+
+Shared Buffers Data Read (SBDR) (CVE-2022-21123)
+------------------------------------------------
+It is similar to Shared Buffer Data Sampling (SBDS) except that the data is
+directly read into the architectural software-visible state. It is limited to
+the client (including Intel Xeon server E3) uncore implementation.
+
+Affected Processors
+===================
+Not all the CPUs are affected by all the variants. For instance, most
+processors for the server market (excluding Intel Xeon E3 processors) are
+impacted by only Device Register Partial Write (DRPW).
+
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============  =========
+   Common name          Family_Model  Steppings
+   ===================  ============  =========
+   HASWELL_X            06_3FH        2,4
+   SKYLAKE_L            06_4EH        3
+   BROADWELL_X          06_4FH        All
+   SKYLAKE_X            06_55H        3,4,6,7,11
+   BROADWELL_D          06_56H        3,4,5
+   SKYLAKE              06_5EH        3
+   ICELAKE_X            06_6AH        4,5,6
+   ICELAKE_D            06_6CH        1
+   ICELAKE_L            06_7EH        5
+   ATOM_TREMONT_D       06_86H        All
+   LAKEFIELD            06_8AH        1
+   KABYLAKE_L           06_8EH        9 to 12
+   ATOM_TREMONT         06_96H        1
+   ATOM_TREMONT_L       06_9CH        0
+   KABYLAKE             06_9EH        9 to 13
+   COMETLAKE            06_A5H        2,3,5
+   COMETLAKE_L          06_A6H        0,1
+   ROCKETLAKE           06_A7H        1
+   ===================  ============  =========
+
+If a CPU is in the affected processor list, but not affected by a variant, it
+is in