diff -druNp --no-dereference linux-libre-4.14-gnu/arch/alpha/include/asm/futex.h linux-libre-4.14.119-gnu/arch/alpha/include/asm/futex.h
--- linux-libre-4.14-gnu/arch/alpha/include/asm/futex.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/alpha/include/asm/futex.h	2019-05-14 13:18:47.000000000 -0400
@@ -20,8 +20,8 @@
 	"3:	.subsection 2\n"				\
 	"4:	br	1b\n"					\
 	"	.previous\n"					\
-	EXC(1b,3b,%1,$31)					\
-	EXC(2b,3b,%1,$31)					\
+	EXC(1b,3b,$31,%1)					\
+	EXC(2b,3b,$31,%1)					\
 	:	"=&r" (oldval), "=&r"(ret)			\
 	:	"r" (uaddr), "r"(oparg)				\
 	:	"memory")
@@ -82,8 +82,8 @@ futex_atomic_cmpxchg_inatomic(u32 *uval,
 	"3:	.subsection 2\n"
 	"4:	br	1b\n"
 	"	.previous\n"
-	EXC(1b,3b,%0,$31)
-	EXC(2b,3b,%0,$31)
+	EXC(1b,3b,$31,%0)
+	EXC(2b,3b,$31,%0)
 	:	"+r"(ret), "=&r"(prev), "=&r"(cmp)
 	:	"r"(uaddr), "r"((long)(int)oldval), "r"(newval)
 	:	"memory");
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/alpha/include/asm/irq.h linux-libre-4.14.119-gnu/arch/alpha/include/asm/irq.h
--- linux-libre-4.14-gnu/arch/alpha/include/asm/irq.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/alpha/include/asm/irq.h	2019-05-14 13:18:47.000000000 -0400
@@ -56,15 +56,15 @@
 
 #elif defined(CONFIG_ALPHA_DP264) || \
       defined(CONFIG_ALPHA_LYNX)  || \
-      defined(CONFIG_ALPHA_SHARK) || \
-      defined(CONFIG_ALPHA_EIGER)
+      defined(CONFIG_ALPHA_SHARK)
 # define NR_IRQS	64
 
 #elif defined(CONFIG_ALPHA_TITAN)
 #define NR_IRQS		80
 
 #elif defined(CONFIG_ALPHA_RAWHIDE) || \
-	defined(CONFIG_ALPHA_TAKARA)
+      defined(CONFIG_ALPHA_TAKARA) || \
+      defined(CONFIG_ALPHA_EIGER)
 # define NR_IRQS	128
 
 #elif defined(CONFIG_ALPHA_WILDFIRE)
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/alpha/include/asm/termios.h linux-libre-4.14.119-gnu/arch/alpha/include/asm/termios.h
--- linux-libre-4.14-gnu/arch/alpha/include/asm/termios.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/alpha/include/asm/termios.h	2019-05-14 13:18:47.000000000 -0400
@@ -73,9 +73,15 @@
 })
 
 #define user_termios_to_kernel_termios(k, u) \
-	copy_from_user(k, u, sizeof(struct termios))
+	copy_from_user(k, u, sizeof(struct termios2))
 
 #define kernel_termios_to_user_termios(u, k) \
+	copy_to_user(u, k, sizeof(struct termios2))
+
+#define user_termios_to_kernel_termios_1(k, u) \
+	copy_from_user(k, u, sizeof(struct termios))
+
+#define kernel_termios_to_user_termios_1(u, k) \
 	copy_to_user(u, k, sizeof(struct termios))
 
 #endif	/* _ALPHA_TERMIOS_H */
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/alpha/include/asm/xchg.h linux-libre-4.14.119-gnu/arch/alpha/include/asm/xchg.h
--- linux-libre-4.14-gnu/arch/alpha/include/asm/xchg.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/alpha/include/asm/xchg.h	2019-05-14 13:18:47.000000000 -0400
@@ -12,6 +12,10 @@
  * Atomic exchange.
  * Since it can be used to implement critical sections
  * it must clobber "memory" (also for interrupts in UP).
+ *
+ * The leading and the trailing memory barriers guarantee that these
+ * operations are fully ordered.
+ *
  */
 
 static inline unsigned long
@@ -19,6 +23,7 @@ ____xchg(_u8, volatile char *m, unsigned
 {
 	unsigned long ret, tmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%4,7,%3\n"
 	"	insbl	%1,%4,%1\n"
@@ -43,6 +48,7 @@ ____xchg(_u16, volatile short *m, unsign
 {
 	unsigned long ret, tmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%4,7,%3\n"
 	"	inswl	%1,%4,%1\n"
@@ -67,6 +73,7 @@ ____xchg(_u32, volatile int *m, unsigned
 {
 	unsigned long dummy;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldl_l %0,%4\n"
 	"	bis $31,%3,%1\n"
@@ -87,6 +94,7 @@ ____xchg(_u64, volatile long *m, unsigne
 {
 	unsigned long dummy;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldq_l %0,%4\n"
 	"	bis $31,%3,%1\n"
@@ -128,10 +136,12 @@ ____xchg(, volatile void *ptr, unsigned
  * store NEW in MEM.  Return the initial value in MEM.  Success is
  * indicated by comparing RETURN with OLD.
  *
- * The memory barrier should be placed in SMP only when we actually
- * make the change. If we don't change anything (so if the returned
- * prev is equal to old) then we aren't acquiring anything new and
- * we don't need any memory barrier as far I can tell.
+ * The leading and the trailing memory barriers guarantee that these
+ * operations are fully ordered.
+ *
+ * The trailing memory barrier is placed in SMP unconditionally, in
+ * order to guarantee that dependency ordering is preserved when a
+ * dependency is headed by an unsuccessful operation.
  */
 
 static inline unsigned long
@@ -139,6 +149,7 @@ ____cmpxchg(_u8, volatile char *m, unsig
 {
 	unsigned long prev, tmp, cmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%5,7,%4\n"
 	"	insbl	%1,%5,%1\n"
@@ -150,8 +161,8 @@ ____cmpxchg(_u8, volatile char *m, unsig
 	"	or	%1,%2,%2\n"
 	"	stq_c	%2,0(%4)\n"
 	"	beq	%2,3f\n"
-		__ASM__MB
 	"2:\n"
+		__ASM__MB
 	".subsection 2\n"
 	"3:	br	1b\n"
 	".previous"
@@ -166,6 +177,7 @@ ____cmpxchg(_u16, volatile short *m, uns
 {
 	unsigned long prev, tmp, cmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%5,7,%4\n"
 	"	inswl	%1,%5,%1\n"
@@ -177,8 +189,8 @@ ____cmpxchg(_u16, volatile short *m, uns
 	"	or	%1,%2,%2\n"
 	"	stq_c	%2,0(%4)\n"
 	"	beq	%2,3f\n"
-		__ASM__MB
 	"2:\n"
+		__ASM__MB
 	".subsection 2\n"
 	"3:	br	1b\n"
 	".previous"
@@ -193,6 +205,7 @@ ____cmpxchg(_u32, volatile int *m, int o
 {
 	unsigned long prev, cmp;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldl_l %0,%5\n"
 	"	cmpeq %0,%3,%1\n"
@@ -200,8 +213,8 @@ ____cmpxchg(_u32, volatile int *m, int o
 	"	mov %4,%1\n"
 	"	stl_c %1,%2\n"
 	"	beq %1,3f\n"
-		__ASM__MB
 	"2:\n"
+		__ASM__MB
 	".subsection 2\n"
 	"3:	br 1b\n"
 	".previous"
@@ -216,6 +229,7 @@ ____cmpxchg(_u64, volatile long *m, unsi
 {
 	unsigned long prev, cmp;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldq_l %0,%5\n"
 	"	cmpeq %0,%3,%1\n"
@@ -223,8 +237,8 @@ ____cmpxchg(_u64, volatile long *m, unsi
 	"	mov %4,%1\n"
 	"	stq_c %1,%2\n"
 	"	beq %1,3f\n"
-		__ASM__MB
 	"2:\n"
+		__ASM__MB
 	".subsection 2\n"
 	"3:	br 1b\n"
 	".previous"
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/alpha/include/uapi/asm/ioctls.h linux-libre-4.14.119-gnu/arch/alpha/include/uapi/asm/ioctls.h
--- linux-libre-4.14-gnu/arch/alpha/include/uapi/asm/ioctls.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/alpha/include/uapi/asm/ioctls.h	2019-05-14 13:18:47.000000000 -0400
@@ -32,6 +32,11 @@
 #define TCXONC		_IO('t', 30)
 #define TCFLSH		_IO('t', 31)
 
+#define TCGETS2		_IOR('T', 42, struct termios2)
+#define TCSETS2		_IOW('T', 43, struct termios2)
+#define TCSETSW2	_IOW('T', 44, struct termios2)
+#define TCSETSF2	_IOW('T', 45, struct termios2)
+
 #define TIOCSWINSZ	_IOW('t', 103, struct winsize)
 #define TIOCGWINSZ	_IOR('t', 104, struct winsize)
 #define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/alpha/include/uapi/asm/termbits.h linux-libre-4.14.119-gnu/arch/alpha/include/uapi/asm/termbits.h
--- linux-libre-4.14-gnu/arch/alpha/include/uapi/asm/termbits.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/alpha/include/uapi/asm/termbits.h	2019-05-14 13:18:47.000000000 -0400
@@ -26,6 +26,19 @@ struct termios {
 	speed_t c_ospeed;		/* output speed */
 };
 
+/* Alpha has identical termios and termios2 */
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
 /* Alpha has matching termios and ktermios */
 
 struct ktermios {
@@ -148,6 +161,7 @@ struct ktermios {
 #define B3000000  00034
 #define B3500000  00035
 #define B4000000  00036
+#define BOTHER    00037
 
 #define CSIZE	00001400
 #define   CS5	00000000
@@ -165,6 +179,9 @@ struct ktermios {
 #define CMSPAR	  010000000000		/* mark or space (stick) parity */
 #define CRTSCTS	  020000000000		/* flow control */
 
+#define CIBAUD	07600000
+#define IBSHIFT	16
+
 /* c_lflag bits */
 #define ISIG	0x00000080
 #define ICANON	0x00000100
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/alpha/kernel/console.c linux-libre-4.14.119-gnu/arch/alpha/kernel/console.c
--- linux-libre-4.14-gnu/arch/alpha/kernel/console.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/alpha/kernel/console.c	2019-05-14 13:18:47.000000000 -0400
@@ -21,6 +21,7 @@
 struct pci_controller *pci_vga_hose;
 static struct resource alpha_vga = {
 	.name	= "alpha-vga+",
+	.flags	= IORESOURCE_IO,
 	.start	= 0x3C0,
 	.end	= 0x3DF
 };
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/alpha/kernel/osf_sys.c linux-libre-4.14.119-gnu/arch/alpha/kernel/osf_sys.c
--- linux-libre-4.14-gnu/arch/alpha/kernel/osf_sys.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/alpha/kernel/osf_sys.c	2019-05-14 13:18:47.000000000 -0400
@@ -530,24 +530,19 @@ SYSCALL_DEFINE4(osf_mount, unsigned long
 SYSCALL_DEFINE1(osf_utsname, char __user *, name)
 {
 	int error;
+	char tmp[5 * 32];
 
 	down_read(&uts_sem);
-	error = -EFAULT;
-	if (copy_to_user(name + 0, utsname()->sysname, 32))
-		goto out;
-	if (copy_to_user(name + 32, utsname()->nodename, 32))
-		goto out;
-	if (copy_to_user(name + 64, utsname()->release, 32))
-		goto out;
-	if (copy_to_user(name + 96, utsname()->version, 32))
-		goto out;
-	if (copy_to_user(name + 128, utsname()->machine, 32))
-		goto out;
+	memcpy(tmp + 0 * 32, utsname()->sysname, 32);
+	memcpy(tmp + 1 * 32, utsname()->nodename, 32);
+	memcpy(tmp + 2 * 32, utsname()->release, 32);
+	memcpy(tmp + 3 * 32, utsname()->version, 32);
+	memcpy(tmp + 4 * 32, utsname()->machine, 32);
+	up_read(&uts_sem);
 
-	error = 0;
- out:
-	up_read(&uts_sem);	
-	return error;
+	if (copy_to_user(name, tmp, sizeof(tmp)))
+		return -EFAULT;
+	return 0;
 }
 
 SYSCALL_DEFINE0(getpagesize)
@@ -567,18 +562,21 @@ SYSCALL_DEFINE2(osf_getdomainname, char
 {
 	int len, err = 0;
 	char *kname;
+	char tmp[32];
 
-	if (namelen > 32)
+	if (namelen < 0 || namelen > 32)
 		namelen = 32;
 
 	down_read(&uts_sem);
 	kname = utsname()->domainname;
 	len = strnlen(kname, namelen);
-	if (copy_to_user(name, kname, min(len + 1, namelen)))
-		err = -EFAULT;
+	len = min(len + 1, namelen);
+	memcpy(tmp, kname, len);
 	up_read(&uts_sem);
 
-	return err;
+	if (copy_to_user(name, tmp, len))
+		return -EFAULT;
+	return 0;
 }
 
 /*
@@ -739,13 +737,14 @@ SYSCALL_DEFINE3(osf_sysinfo, int, comman
 	};
 	unsigned long offset;
 	const char *res;
-	long len, err = -EINVAL;
+	long len;
+	char tmp[__NEW_UTS_LEN + 1];
 
 	offset = command-1;
 	if (offset >= ARRAY_SIZE(sysinfo_table)) {
 		/* Digital UNIX has a few unpublished interfaces here */
 		printk("sysinfo(%d)", command);
-		goto out;
+		return -EINVAL;
 	}
 
 	down_read(&uts_sem);
@@ -753,13 +752,11 @@ SYSCALL_DEFINE3(osf_sysinfo, int, comman
 	len = strlen(res)+1;
 	if ((unsigned long)len > (unsigned long)count)
 		len = count;
-	if (copy_to_user(buf, res, len))
-		err = -EFAULT;
-	else
-		err = 0;
+	memcpy(tmp, res, len);
 	up_read(&uts_sem);
- out:
-	return err;
+	if (copy_to_user(buf, tmp, len))
+		return -EFAULT;
+	return 0;
 }
 
 SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer,
@@ -964,8 +961,8 @@ static inline long
 put_tv32(struct timeval32 __user *o, struct timeval *i)
 {
 	return copy_to_user(o, &(struct timeval32){
-				.tv_sec = o->tv_sec,
-				.tv_usec = o->tv_usec},
+				.tv_sec = i->tv_sec,
+				.tv_usec = i->tv_usec},
 			    sizeof(struct timeval32));
 }
 
@@ -1183,13 +1180,10 @@ SYSCALL_DEFINE2(osf_getrusage, int, who,
 SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
 		struct rusage32 __user *, ur)
 {
-	unsigned int status = 0;
 	struct rusage r;
-	long err = kernel_wait4(pid, &status, options, &r);
+	long err = kernel_wait4(pid, ustatus, options, &r);
 	if (err <= 0)
 		return err;
-	if (put_user(status, ustatus))
-		return -EFAULT;
 	if (!ur)
 		return err;
 	if (put_tv32(&ur->ru_utime, &r.ru_utime))
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/alpha/kernel/pci_impl.h linux-libre-4.14.119-gnu/arch/alpha/kernel/pci_impl.h
--- linux-libre-4.14-gnu/arch/alpha/kernel/pci_impl.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/alpha/kernel/pci_impl.h	2019-05-14 13:18:47.000000000 -0400
@@ -144,7 +144,8 @@ struct pci_iommu_arena
 };
 
 #if defined(CONFIG_ALPHA_SRM) && \
-    (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA))
+    (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA) || \
+     defined(CONFIG_ALPHA_AVANTI))
 # define NEED_SRM_SAVE_RESTORE
 #else
 # undef NEED_SRM_SAVE_RESTORE
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/alpha/kernel/process.c linux-libre-4.14.119-gnu/arch/alpha/kernel/process.c
--- linux-libre-4.14-gnu/arch/alpha/kernel/process.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/alpha/kernel/process.c	2019-05-14 13:18:47.000000000 -0400
@@ -269,12 +269,13 @@ copy_thread(unsigned long clone_flags, u
 	   application calling fork.  */
 	if (clone_flags & CLONE_SETTLS)
 		childti->pcb.unique = regs->r20;
+	else
+		regs->r20 = 0;	/* OSF/1 has some strange fork() semantics.  */
 	childti->pcb.usp = usp ?: rdusp();
 	*childregs = *regs;
 	childregs->r0 = 0;
 	childregs->r19 = 0;
 	childregs->r20 = 1;	/* OSF/1 has some strange fork() semantics.  */
-	regs->r20 = 0;
 	stack = ((struct switch_stack *) regs) - 1;
 	*childstack = *stack;
 	childstack->r26 = (unsigned long) ret_from_fork;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/alpha/kernel/sys_sio.c linux-libre-4.14.119-gnu/arch/alpha/kernel/sys_sio.c
--- linux-libre-4.14-gnu/arch/alpha/kernel/sys_sio.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/alpha/kernel/sys_sio.c	2019-05-14 13:18:47.000000000 -0400
@@ -102,6 +102,15 @@ sio_pci_route(void)
 				   alpha_mv.sys.sio.route_tab);
 }
 
+static bool sio_pci_dev_irq_needs_level(const struct pci_dev *dev)
+{
+	if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) &&
+	    (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA))
+		return false;
+
+	return true;
+}
+
 static unsigned int __init
 sio_collect_irq_levels(void)
 {
@@ -110,8 +119,7 @@ sio_collect_irq_levels(void)
 
 	/* Iterate through the devices, collecting IRQ levels.  */
 	for_each_pci_dev(dev) {
-		if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) &&
-		    (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA))
+		if (!sio_pci_dev_irq_needs_level(dev))
 			continue;
 
 		if (dev->irq)
@@ -120,8 +128,7 @@ sio_collect_irq_levels(void)
 	return level_bits;
 }
 
-static void __init
-sio_fixup_irq_levels(unsigned int level_bits)
+static void __sio_fixup_irq_levels(unsigned int level_bits, bool reset)
 {
 	unsigned int old_level_bits;
 
@@ -139,12 +146,21 @@ sio_fixup_irq_levels(unsigned int level_
 	 */
 	old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8);
 
-	level_bits |= (old_level_bits & 0x71ff);
+	if (reset)
+		old_level_bits &= 0x71ff;
+
+	level_bits |= old_level_bits;
 
 	outb((level_bits >> 0) & 0xff, 0x4d0);
 	outb((level_bits >> 8) & 0xff, 0x4d1);
 }
 
+static inline void
+sio_fixup_irq_levels(unsigned int level_bits)
+{
+	__sio_fixup_irq_levels(level_bits, true);
+}
+
 static inline int
 noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
@@ -181,7 +197,14 @@ noname_map_irq(const struct pci_dev *dev
 	const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5;
 	int irq = COMMON_TABLE_LOOKUP, tmp;
 	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-	return irq >= 0 ? tmp : -1;
+
+	irq = irq >= 0 ? tmp : -1;
+
+	/* Fixup IRQ level if an actual IRQ mapping is detected */
+	if (sio_pci_dev_irq_needs_level(dev) && irq >= 0)
+		__sio_fixup_irq_levels(1 << irq, false);
+
+	return irq;
 }
 
 static inline int
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/alpha/kernel/traps.c linux-libre-4.14.119-gnu/arch/alpha/kernel/traps.c
--- linux-libre-4.14-gnu/arch/alpha/kernel/traps.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/alpha/kernel/traps.c	2019-05-14 13:18:47.000000000 -0400
@@ -160,11 +160,16 @@ void show_stack(struct task_struct *task
 	for(i=0; i < kstack_depth_to_print; i++) {
 		if (((long) stack & (THREAD_SIZE-1)) == 0)
 			break;
-		if (i && ((i % 4) == 0))
-			printk("\n       ");
-		printk("%016lx ", *stack++);
+		if ((i % 4) == 0) {
+			if (i)
+				pr_cont("\n");
+			printk("       ");
+		} else {
+			pr_cont(" ");
+		}
+		pr_cont("%016lx", *stack++);
 	}
-	printk("\n");
+	pr_cont("\n");
 	dik_show_trace(sp);
 }
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/alpha/mm/fault.c linux-libre-4.14.119-gnu/arch/alpha/mm/fault.c
--- linux-libre-4.14-gnu/arch/alpha/mm/fault.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/alpha/mm/fault.c	2019-05-14 13:18:47.000000000 -0400
@@ -78,7 +78,7 @@ __load_new_mm_context(struct mm_struct *
 /* Macro for exception fixup code to access integer registers.  */
 #define dpf_reg(r)							\
 	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-16 :	\
-				 (r) <= 18 ? (r)+8 : (r)-10])
+				 (r) <= 18 ? (r)+10 : (r)-10])
 
 asmlinkage void
 do_page_fault(unsigned long address, unsigned long mmcsr,
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/boot/.gitignore linux-libre-4.14.119-gnu/arch/arc/boot/.gitignore
--- linux-libre-4.14-gnu/arch/arc/boot/.gitignore	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/boot/.gitignore	2019-05-14 13:18:47.000000000 -0400
@@ -1,2 +1 @@
-*.dtb*
 uImage
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/axs101_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/axs101_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/axs101_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/axs101_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -1,5 +1,4 @@
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@@ -11,12 +10,12 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -100,6 +99,7 @@ CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/axs103_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/axs103_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/axs103_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/axs103_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -1,5 +1,4 @@
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@@ -11,7 +10,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -99,6 +97,7 @@ CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/axs103_smp_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/axs103_smp_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/axs103_smp_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/axs103_smp_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -1,5 +1,4 @@
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@@ -11,7 +10,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -102,6 +100,7 @@ CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/haps_hs_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/haps_hs_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/haps_hs_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/haps_hs_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/haps_hs_smp_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/haps_hs_smp_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/haps_hs_smp_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/haps_hs_smp_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/hsdk_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/hsdk_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/hsdk_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/hsdk_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -9,7 +9,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
+CONFIG_BLK_DEV_RAM=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -67,6 +67,7 @@ CONFIG_EXT3_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/nps_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/nps_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/nps_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/nps_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -15,6 +15,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
@@ -74,6 +75,7 @@ CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/nsim_700_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/nsim_700_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/nsim_700_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/nsim_700_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -11,12 +11,12 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_LBDAF is not set
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/nsim_hs_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/nsim_hs_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/nsim_hs_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/nsim_hs_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/nsim_hs_smp_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/nsim_hs_smp_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/nsim_hs_smp_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/nsim_hs_smp_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -9,7 +9,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/nsimosci_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/nsimosci_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/nsimosci_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/nsimosci_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -11,12 +11,12 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_LBDAF is not set
@@ -70,5 +70,6 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/nsimosci_hs_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/nsimosci_hs_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/nsimosci_hs_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/nsimosci_hs_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
@@ -69,5 +68,6 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/nsimosci_hs_smp_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/nsimosci_hs_smp_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/nsimosci_hs_smp_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/nsimosci_hs_smp_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -9,7 +9,6 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
@@ -80,6 +79,7 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FTRACE=y
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/tb10x_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/tb10x_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/tb10x_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/tb10x_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -19,6 +19,7 @@ CONFIG_KALLSYMS_ALL=y
 # CONFIG_AIO is not set
 CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/vdk_hs38_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/vdk_hs38_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/vdk_hs38_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/vdk_hs38_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -88,6 +88,7 @@ CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/configs/vdk_hs38_smp_defconfig linux-libre-4.14.119-gnu/arch/arc/configs/vdk_hs38_smp_defconfig
--- linux-libre-4.14-gnu/arch/arc/configs/vdk_hs38_smp_defconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/configs/vdk_hs38_smp_defconfig	2019-05-14 13:18:47.000000000 -0400
@@ -92,6 +92,7 @@ CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/include/asm/atomic.h linux-libre-4.14.119-gnu/arch/arc/include/asm/atomic.h
--- linux-libre-4.14-gnu/arch/arc/include/asm/atomic.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/include/asm/atomic.h	2019-05-14 13:18:47.000000000 -0400
@@ -84,7 +84,7 @@ static inline int atomic_fetch_##op(int
 	"1:	llock   %[orig], [%[ctr]]		\n"		\
 	"	" #asm_op " %[val], %[orig], %[i]	\n"		\
 	"	scond   %[val], [%[ctr]]		\n"		\
-	"						\n"		\
+	"	bnz     1b				\n"		\
 	: [val]	"=&r"	(val),						\
 	  [orig] "=&r" (orig)						\
 	: [ctr]	"r"	(&v->counter),					\
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/include/asm/bitops.h linux-libre-4.14.119-gnu/arch/arc/include/asm/bitops.h
--- linux-libre-4.14-gnu/arch/arc/include/asm/bitops.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/include/asm/bitops.h	2019-05-14 13:18:47.000000000 -0400
@@ -340,7 +340,7 @@ static inline __attribute__ ((const)) in
 /*
  * __ffs: Similar to ffs, but zero based (0-31)
  */
-static inline __attribute__ ((const)) int __ffs(unsigned long word)
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long word)
 {
 	if (!word)
 		return word;
@@ -400,9 +400,9 @@ static inline __attribute__ ((const)) in
 /*
  * __ffs: Similar to ffs, but zero based (0-31)
  */
-static inline __attribute__ ((const)) int __ffs(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
 {
-	int n;
+	unsigned long n;
 
 	asm volatile(
 	"	ffs.f	%0, %1		\n"  /* 0:31; 31(Z) if src 0 */
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/include/asm/bug.h linux-libre-4.14.119-gnu/arch/arc/include/asm/bug.h
--- linux-libre-4.14-gnu/arch/arc/include/asm/bug.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/include/asm/bug.h	2019-05-14 13:18:47.000000000 -0400
@@ -23,7 +23,8 @@ void die(const char *str, struct pt_regs
 
 #define BUG()	do {								\
 	pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
-	dump_stack();								\
+	barrier_before_unreachable();						\
+	__builtin_trap();							\
 } while (0)
 
 #define HAVE_ARCH_BUG
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/include/asm/cache.h linux-libre-4.14.119-gnu/arch/arc/include/asm/cache.h
--- linux-libre-4.14-gnu/arch/arc/include/asm/cache.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/include/asm/cache.h	2019-05-14 13:18:47.000000000 -0400
@@ -48,7 +48,20 @@
 })
 
 /* Largest line length for either L1 or L2 is 128 bytes */
-#define ARCH_DMA_MINALIGN      128
+#define SMP_CACHE_BYTES		128
+#define cache_line_size()	SMP_CACHE_BYTES
+#define ARCH_DMA_MINALIGN	SMP_CACHE_BYTES
+
+/*
+ * Make sure slab-allocated buffers are 64-bit aligned when atomic64_t uses
+ * ARCv2 64-bit atomics (LLOCKD/SCONDD). This guarantess runtime 64-bit
+ * alignment for any atomic64_t embedded in buffer.
+ * Default ARCH_SLAB_MINALIGN is __alignof__(long long) which has a relaxed
+ * value of 4 (and not 8) in ARC ABI.
+ */
+#if defined(CONFIG_ARC_HAS_LL64) && defined(CONFIG_ARC_HAS_LLSC)
+#define ARCH_SLAB_MINALIGN	8
+#endif
 
 extern void arc_cache_init(void);
 extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/include/asm/delay.h linux-libre-4.14.119-gnu/arch/arc/include/asm/delay.h
--- linux-libre-4.14-gnu/arch/arc/include/asm/delay.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/include/asm/delay.h	2019-05-14 13:18:47.000000000 -0400
@@ -17,8 +17,11 @@
 #ifndef __ASM_ARC_UDELAY_H
 #define __ASM_ARC_UDELAY_H
 
+#include <asm-generic/types.h>
 #include <asm/param.h>		/* HZ */
 
+extern unsigned long loops_per_jiffy;
+
 static inline void __delay(unsigned long loops)
 {
 	__asm__ __volatile__(
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/include/asm/entry-arcv2.h linux-libre-4.14.119-gnu/arch/arc/include/asm/entry-arcv2.h
--- linux-libre-4.14-gnu/arch/arc/include/asm/entry-arcv2.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/include/asm/entry-arcv2.h	2019-05-14 13:18:47.000000000 -0400
@@ -17,6 +17,33 @@
 	;
 	; Now manually save: r12, sp, fp, gp, r25
 
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+.ifnc \called_from, exception
+	st.as	r9, [sp, -10]	; save r9 in it's final stack slot
+	sub	sp, sp, 12	; skip JLI, LDI, EI
+
+	PUSH	lp_count
+	PUSHAX	lp_start
+	PUSHAX	lp_end
+	PUSH	blink
+
+	PUSH	r11
+	PUSH	r10
+
+	sub	sp, sp, 4	; skip r9
+
+	PUSH	r8
+	PUSH	r7
+	PUSH	r6
+	PUSH	r5
+	PUSH	r4
+	PUSH	r3
+	PUSH	r2
+	PUSH	r1
+	PUSH	r0
+.endif
+#endif
+
 #ifdef CONFIG_ARC_HAS_ACCL_REGS
 	PUSH	r59
 	PUSH	r58
@@ -86,6 +113,33 @@
 	POP	r59
 #endif
 
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+.ifnc \called_from, exception
+	POP	r0
+	POP	r1
+	POP	r2
+	POP	r3
+	POP	r4
+	POP	r5
+	POP	r6
+	POP	r7
+	POP	r8
+	POP	r9
+	POP	r10
+	POP	r11
+
+	POP	blink
+	POPAX	lp_end
+	POPAX	lp_start
+
+	POP	r9
+	mov	lp_count, r9
+
+	add	sp, sp, 12	; skip JLI, LDI, EI
+	ld.as	r9, [sp, -10]	; reload r9 which got clobbered
+.endif
+#endif
+
 .endm
 
 /*------------------------------------------------------------------------*/
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/include/asm/io.h linux-libre-4.14.119-gnu/arch/arc/include/asm/io.h
--- linux-libre-4.14-gnu/arch/arc/include/asm/io.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/include/asm/io.h	2019-05-14 13:18:47.000000000 -0400
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
+#include <asm/unaligned.h>
 
 #ifdef CONFIG_ISA_ARCV2
 #include <asm/barrier.h>
@@ -94,6 +95,42 @@ static inline u32 __raw_readl(const vola
 	return w;
 }
 
+/*
+ * {read,write}s{b,w,l}() repeatedly access the same IO address in
+ * native endianness in 8-, 16-, 32-bit chunks {into,from} memory,
+ * @count times
+ */
+#define __raw_readsx(t,f) \
+static inline void __raw_reads##f(const volatile void __iomem *addr,	\
+				  void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			*buf++ = x;					\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			put_unaligned(x, buf++);			\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_readsb __raw_readsb
+__raw_readsx(8, b)
+#define __raw_readsw __raw_readsw
+__raw_readsx(16, w)
+#define __raw_readsl __raw_readsl
+__raw_readsx(32, l)
+
 #define __raw_writeb __raw_writeb
 static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
 {
@@ -126,6 +163,35 @@ static inline void __raw_writel(u32 w, v
 
 }
 
+#define __raw_writesx(t,f)						\
+static inline void __raw_writes##f(volatile void __iomem *addr, 	\
+				   const void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	const u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			__raw_write##f(*buf++, addr);			\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			__raw_write##f(get_unaligned(buf++), addr);	\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_writesb __raw_writesb
+__raw_writesx(8, b)
+#define __raw_writesw __raw_writesw
+__raw_writesx(16, w)
+#define __raw_writesl __raw_writesl
+__raw_writesx(32, l)
+
 /*
  * MMIO can also get buffered/optimized in micro-arch, so barriers needed
  * Based on ARM model for the typical use case
@@ -141,10 +207,16 @@ static inline void __raw_writel(u32 w, v
 #define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
 #define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
 #define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+#define readsb(p,d,l)		({ __raw_readsb(p,d,l); __iormb(); })
+#define readsw(p,d,l)		({ __raw_readsw(p,d,l); __iormb(); })
+#define readsl(p,d,l)		({ __raw_readsl(p,d,l); __iormb(); })
 
 #define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
 #define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
 #define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
+#define writesb(p,d,l)		({ __iowmb(); __raw_writesb(p,d,l); })
+#define writesw(p,d,l)		({ __iowmb(); __raw_writesw(p,d,l); })
+#define writesl(p,d,l)		({ __iowmb(); __raw_writesl(p,d,l); })
 
 /*
  * Relaxed API for drivers which can handle barrier ordering themselves
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/include/asm/mach_desc.h linux-libre-4.14.119-gnu/arch/arc/include/asm/mach_desc.h
--- linux-libre-4.14-gnu/arch/arc/include/asm/mach_desc.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/include/asm/mach_desc.h	2019-05-14 13:18:47.000000000 -0400
@@ -34,9 +34,7 @@ struct machine_desc {
 	const char		*name;
 	const char		**dt_compat;
 	void			(*init_early)(void);
-#ifdef CONFIG_SMP
 	void			(*init_per_cpu)(unsigned int);
-#endif
 	void			(*init_machine)(void);
 	void			(*init_late)(void);
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/include/asm/page.h linux-libre-4.14.119-gnu/arch/arc/include/asm/page.h
--- linux-libre-4.14-gnu/arch/arc/include/asm/page.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/include/asm/page.h	2019-05-14 13:18:47.000000000 -0400
@@ -105,7 +105,7 @@ typedef pte_t * pgtable_t;
 #define virt_addr_valid(kaddr)  pfn_valid(virt_to_pfn(kaddr))
 
 /* Default Permissions for stack/heaps pages (Non Executable) */
-#define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE)
+#define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #define WANT_PAGE_VIRTUAL   1
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/include/asm/perf_event.h linux-libre-4.14.119-gnu/arch/arc/include/asm/perf_event.h
--- linux-libre-4.14-gnu/arch/arc/include/asm/perf_event.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/include/asm/perf_event.h	2019-05-14 13:18:47.000000000 -0400
@@ -103,7 +103,8 @@ static const char * const arc_pmu_ev_hw_
 
 	/* counts condition */
 	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp", /* Excludes ZOL jumps */
+	/* All jump instructions that are taken */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
 	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
 #ifdef CONFIG_ISA_ARCV2
 	[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/include/asm/pgtable.h linux-libre-4.14.119-gnu/arch/arc/include/asm/pgtable.h
--- linux-libre-4.14-gnu/arch/arc/include/asm/pgtable.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/include/asm/pgtable.h	2019-05-14 13:18:47.000000000 -0400
@@ -379,7 +379,7 @@ void update_mmu_cache(struct vm_area_str
 
 /* Decode a PTE containing swap "identifier "into constituents */
 #define __swp_type(pte_lookalike)	(((pte_lookalike).val) & 0x1f)
-#define __swp_offset(pte_lookalike)	((pte_lookalike).val << 13)
+#define __swp_offset(pte_lookalike)	((pte_lookalike).val >> 13)
 
 /* NOPs, to keep generic kernel happy */
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/include/asm/uaccess.h linux-libre-4.14.119-gnu/arch/arc/include/asm/uaccess.h
--- linux-libre-4.14-gnu/arch/arc/include/asm/uaccess.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/include/asm/uaccess.h	2019-05-14 13:18:47.000000000 -0400
@@ -207,7 +207,7 @@ raw_copy_from_user(void *to, const void
 		*/
 		  "=&r" (tmp), "+r" (to), "+r" (from)
 		:
-		: "lp_count", "lp_start", "lp_end", "memory");
+		: "lp_count", "memory");
 
 		return n;
 	}
@@ -433,7 +433,7 @@ raw_copy_to_user(void __user *to, const
 		 */
 		  "=&r" (tmp), "+r" (to), "+r" (from)
 		:
-		: "lp_count", "lp_start", "lp_end", "memory");
+		: "lp_count", "memory");
 
 		return n;
 	}
@@ -653,7 +653,7 @@ static inline unsigned long __arc_clear_
 	"	.previous			\n"
 	: "+r"(d_char), "+r"(res)
 	: "i"(0)
-	: "lp_count", "lp_start", "lp_end", "memory");
+	: "lp_count", "memory");
 
 	return res;
 }
@@ -668,6 +668,7 @@ __arc_strncpy_from_user(char *dst, const
 		return 0;
 
 	__asm__ __volatile__(
+	"	mov	lp_count, %5		\n"
 	"	lp	3f			\n"
 	"1:	ldb.ab  %3, [%2, 1]		\n"
 	"	breq.d	%3, 0, 3f               \n"
@@ -684,8 +685,8 @@ __arc_strncpy_from_user(char *dst, const
 	"	.word   1b, 4b			\n"
 	"	.previous			\n"
 	: "+r"(res), "+r"(dst), "+r"(src), "=r"(val)
-	: "g"(-EFAULT), "l"(count)
-	: "memory");
+	: "g"(-EFAULT), "r"(count)
+	: "lp_count", "memory");
 
 	return res;
 }
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/Kconfig linux-libre-4.14.119-gnu/arch/arc/Kconfig
--- linux-libre-4.14-gnu/arch/arc/Kconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/Kconfig	2019-05-14 13:18:47.000000000 -0400
@@ -45,6 +45,9 @@ config ARC
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZMA
 
+config ARCH_HAS_CACHE_LINE_SIZE
+	def_bool y
+
 config MIGHT_HAVE_PCI
 	bool
 
@@ -106,7 +109,7 @@ endmenu
 
 choice
 	prompt "ARC Instruction Set"
-	default ISA_ARCOMPACT
+	default ISA_ARCV2
 
 config ISA_ARCOMPACT
 	bool "ARCompact ISA"
@@ -408,12 +411,20 @@ config ARC_HAS_DIV_REM
 
 config ARC_HAS_ACCL_REGS
 	bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6)"
-	default n
+	default y
 	help
 	  Depending on the configuration, CPU can contain accumulator reg-pair
 	  (also referred to as r58:r59). These can also be used by gcc as GPR so
 	  kernel needs to save/restore per process
 
+config ARC_IRQ_NO_AUTOSAVE
+	bool "Disable hardware autosave regfile on interrupts"
+	default n
+	help
+	  On HS cores, taken interrupt auto saves the regfile on stack.
+	  This is programmable and can be optionally disabled in which case
+	  software INTERRUPT_PROLOGUE/EPILGUE do the needed work
+
 endif	# ISA_ARCV2
 
 endmenu   # "ARC CPU Configuration"
@@ -487,7 +498,6 @@ config ARC_CURR_IN_REG
 
 config ARC_EMUL_UNALIGNED
 	bool "Emulate unaligned memory access (userspace only)"
-	default N
 	select SYSCTL_ARCH_UNALIGN_NO_WARN
 	select SYSCTL_ARCH_UNALIGN_ALLOW
 	depends on ISA_ARCOMPACT
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/kernel/entry-arcv2.S linux-libre-4.14.119-gnu/arch/arc/kernel/entry-arcv2.S
--- linux-libre-4.14-gnu/arch/arc/kernel/entry-arcv2.S	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/kernel/entry-arcv2.S	2019-05-14 13:18:47.000000000 -0400
@@ -209,7 +209,9 @@ restore_regs:
 ;####### Return from Intr #######
 
 debug_marker_l1:
-	bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot
+	; bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot
+	btst	r0, STATUS_DE_BIT		; Z flag set if bit clear
+	bnz	.Lintr_ret_to_delay_slot	; branch if STATUS_DE_BIT set
 
 .Lisr_ret_fast_path:
 	; Handle special case #1: (Entry via Exception, Return via IRQ)
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/kernel/head.S linux-libre-4.14.119-gnu/arch/arc/kernel/head.S
--- linux-libre-4.14-gnu/arch/arc/kernel/head.S	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/kernel/head.S	2019-05-14 13:18:47.000000000 -0400
@@ -17,6 +17,7 @@
 #include <asm/entry.h>
 #include <asm/arcregs.h>
 #include <asm/cache.h>
+#include <asm/irqflags.h>
 
 .macro CPU_EARLY_SETUP
 
@@ -47,6 +48,15 @@
 	sr	r5, [ARC_REG_DC_CTRL]
 
 1:
+
+#ifdef CONFIG_ISA_ARCV2
+	; Unaligned access is disabled at reset, so re-enable early as
+	; gcc 7.3.1 (ARC GNU 2018.03) onwards generates unaligned access
+	; by default
+	lr	r5, [status32]
+	bset	r5, r5, STATUS_AD_BIT
+	kflag	r5
+#endif
 .endm
 
 	.section .init.text, "ax",@progbits
@@ -93,10 +103,11 @@ ENTRY(stext)
 #ifdef CONFIG_ARC_UBOOT_SUPPORT
 	; Uboot - kernel ABI
 	;    r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2
-	;    r1 = magic number (board identity, unused as of now
+	;    r1 = magic number (always zero as of now)
 	;    r2 = pointer to uboot provided cmdline or external DTB in mem
-	; These are handled later in setup_arch()
+	; These are handled later in handle_uboot_args()
 	st	r0, [@uboot_tag]
+	st      r1, [@uboot_magic]
 	st	r2, [@uboot_arg]
 #endif
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/kernel/intc-arcv2.c linux-libre-4.14.119-gnu/arch/arc/kernel/intc-arcv2.c
--- linux-libre-4.14-gnu/arch/arc/kernel/intc-arcv2.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/kernel/intc-arcv2.c	2019-05-14 13:18:47.000000000 -0400
@@ -49,11 +49,13 @@ void arc_init_IRQ(void)
 
 	*(unsigned int *)&ictrl = 0;
 
+#ifndef CONFIG_ARC_IRQ_NO_AUTOSAVE
 	ictrl.save_nr_gpr_pairs = 6;	/* r0 to r11 (r12 saved manually) */
 	ictrl.save_blink = 1;
 	ictrl.save_lp_regs = 1;		/* LP_COUNT, LP_START, LP_END */
 	ictrl.save_u_to_u = 0;		/* user ctxt saved on kernel stack */
 	ictrl.save_idx_regs = 1;	/* JLI, LDI, EI */
+#endif
 
 	WRITE_AUX(AUX_IRQ_CTRL, ictrl);
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/kernel/irq.c linux-libre-4.14.119-gnu/arch/arc/kernel/irq.c
--- linux-libre-4.14-gnu/arch/arc/kernel/irq.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/kernel/irq.c	2019-05-14 13:18:47.000000000 -0400
@@ -31,10 +31,10 @@ void __init init_IRQ(void)
 	/* a SMP H/w block could do IPI IRQ request here */
 	if (plat_smp_ops.init_per_cpu)
 		plat_smp_ops.init_per_cpu(smp_processor_id());
+#endif
 
 	if (machine_desc->init_per_cpu)
 		machine_desc->init_per_cpu(smp_processor_id());
-#endif
 }
 
 /*
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/kernel/mcip.c linux-libre-4.14.119-gnu/arch/arc/kernel/mcip.c
--- linux-libre-4.14-gnu/arch/arc/kernel/mcip.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/kernel/mcip.c	2019-05-14 13:18:47.000000000 -0400
@@ -22,10 +22,79 @@ static DEFINE_RAW_SPINLOCK(mcip_lock);
 
 static char smp_cpuinfo_buf[128];
 
+/*
+ * Set mask to halt GFRC if any online core in SMP cluster is halted.
+ * Only works for ARC HS v3.0+, on earlier versions has no effect.
+ */
+static void mcip_update_gfrc_halt_mask(int cpu)
+{
+	struct bcr_generic gfrc;
+	unsigned long flags;
+	u32 gfrc_halt_mask;
+
+	READ_BCR(ARC_REG_GFRC_BUILD, gfrc);
+
+	/*
+	 * CMD_GFRC_SET_CORE and CMD_GFRC_READ_CORE commands were added in
+	 * GFRC 0x3 version.
+	 */
+	if (gfrc.ver < 0x3)
+		return;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	__mcip_cmd(CMD_GFRC_READ_CORE, 0);
+	gfrc_halt_mask = read_aux_reg(ARC_REG_MCIP_READBACK);
+	gfrc_halt_mask |= BIT(cpu);
+	__mcip_cmd_data(CMD_GFRC_SET_CORE, 0, gfrc_halt_mask);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
+static void mcip_update_debug_halt_mask(int cpu)
+{
+	u32 mcip_mask = 0;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	/*
+	 * mcip_mask is same for CMD_DEBUG_SET_SELECT and CMD_DEBUG_SET_MASK
+	 * commands. So read it once instead of reading both CMD_DEBUG_READ_MASK
+	 * and CMD_DEBUG_READ_SELECT.
+	 */
+	__mcip_cmd(CMD_DEBUG_READ_SELECT, 0);
+	mcip_mask = read_aux_reg(ARC_REG_MCIP_READBACK);
+
+	mcip_mask |= BIT(cpu);
+
+	__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, mcip_mask);
+	/*
+	 * Parameter specified halt cause:
+	 * STATUS32[H]/actionpoint/breakpoint/self-halt
+	 * We choose all of them (0xF).
+	 */
+	__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xF, mcip_mask);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
 static void mcip_setup_per_cpu(int cpu)
 {
+	struct mcip_bcr mp;
+
+	READ_BCR(ARC_REG_MCIP_BCR, mp);
+
 	smp_ipi_irq_setup(cpu, IPI_IRQ);
 	smp_ipi_irq_setup(cpu, SOFTIRQ_IRQ);
+
+	/* Update GFRC halt mask as new CPU came online */
+	if (mp.gfrc)
+		mcip_update_gfrc_halt_mask(cpu);
+
+	/* Update MCIP debug mask as new CPU came online */
+	if (mp.dbg)
+		mcip_update_debug_halt_mask(cpu);
 }
 
 static void mcip_ipi_send(int cpu)
@@ -101,11 +170,6 @@ static void mcip_probe_n_setup(void)
 		IS_AVAIL1(mp.gfrc, "GFRC"));
 
 	cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
-
-	if (mp.dbg) {
-		__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, 0xf);
-		__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
-	}
 }
 
 struct plat_smp_ops plat_smp_ops = {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/kernel/process.c linux-libre-4.14.119-gnu/arch/arc/kernel/process.c
--- linux-libre-4.14-gnu/arch/arc/kernel/process.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/kernel/process.c	2019-05-14 13:18:47.000000000 -0400
@@ -47,7 +47,8 @@ SYSCALL_DEFINE0(arc_gettls)
 SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
 {
 	struct pt_regs *regs = current_pt_regs();
-	int uval = -EFAULT;
+	u32 uval;
+	int ret;
 
 	/*
 	 * This is only for old cores lacking LLOCK/SCOND, which by defintion
@@ -60,23 +61,47 @@ SYSCALL_DEFINE3(arc_usr_cmpxchg, int *,
 	/* Z indicates to userspace if operation succeded */
 	regs->status32 &= ~STATUS_Z_MASK;
 
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
+	ret = access_ok(VERIFY_WRITE, uaddr, sizeof(*uaddr));
+	if (!ret)
+		 goto fail;
 
+again:
 	preempt_disable();
 
-	if (__get_user(uval, uaddr))
-		goto done;
+	ret = __get_user(uval, uaddr);
+	if (ret)
+		 goto fault;
 
-	if (uval == expected) {
-		if (!__put_user(new, uaddr))
-			regs->status32 |= STATUS_Z_MASK;
-	}
+	if (uval != expected)
+		 goto out;
 
-done:
-	preempt_enable();
+	ret = __put_user(new, uaddr);
+	if (ret)
+		 goto fault;
 
+	regs->status32 |= STATUS_Z_MASK;
+
+out:
+	preempt_enable();
 	return uval;
+
+fault:
+	preempt_enable();
+
+	if (unlikely(ret != -EFAULT))
+		 goto fail;
+
+	down_read(&current->mm->mmap_sem);
+	ret = fixup_user_fault(current, current->mm, (unsigned long) uaddr,
+			       FAULT_FLAG_WRITE, NULL);
+	up_read(&current->mm->mmap_sem);
+
+	if (likely(!ret))
+		 goto again;
+
+fail:
+	force_sig(SIGSEGV, current);
+	return ret;
 }
 
 #ifdef CONFIG_ISA_ARCV2
@@ -216,6 +241,26 @@ int copy_thread(unsigned long clone_flag
 		task_thread_info(current)->thr_ptr;
 	}
 
+
+	/*
+	 * setup usermode thread pointer #1:
+	 * when child is picked by scheduler, __switch_to() uses @c_callee to
+	 * populate usermode callee regs: this works (despite being in a kernel
+	 * function) since special return path for child @ret_from_fork()
+	 * ensures those regs are not clobbered all the way to RTIE to usermode
+	 */
+	c_callee->r25 = task_thread_info(p)->thr_ptr;
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	/*
+	 * setup usermode thread pointer #2:
+	 * however for this special use of r25 in kernel, __switch_to() sets
+	 * r25 for kernel needs and only in the final return path is usermode
+	 * r25 setup, from pt_regs->user_r25. So set that up as well
+	 */
+	c_regs->user_r25 = c_callee->r25;
+#endif
+
 	return 0;
 }
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/kernel/setup.c linux-libre-4.14.119-gnu/arch/arc/kernel/setup.c
--- linux-libre-4.14-gnu/arch/arc/kernel/setup.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/kernel/setup.c	2019-05-14 13:18:47.000000000 -0400
@@ -35,6 +35,7 @@ unsigned int intr_to_DE_cnt;
 
 /* Part of U-boot ABI: see head.S */
 int __initdata uboot_tag;
+int __initdata uboot_magic;
 char __initdata *uboot_arg;
 
 const struct machine_desc *machine_desc;
@@ -414,43 +415,87 @@ void setup_processor(void)
 	arc_chk_core_config();
 }
 
-static inline int is_kernel(unsigned long addr)
+static inline bool uboot_arg_invalid(unsigned long addr)
 {
-	if (addr >= (unsigned long)_stext && addr <= (unsigned long)_end)
-		return 1;
-	return 0;
+	/*
+	 * Check that it is a untranslated address (although MMU is not enabled
+	 * yet, it being a high address ensures this is not by fluke)
+	 */
+	if (addr < PAGE_OFFSET)
+		return true;
+
+	/* Check that address doesn't clobber resident kernel image */
+	return addr >= (unsigned long)_stext && addr <= (unsigned long)_end;
 }
 
-void __init setup_arch(char **cmdline_p)
+#define IGNORE_ARGS		"Ignore U-boot args: "
+
+/* uboot_tag values for U-boot - kernel ABI revision 0; see head.S */
+#define UBOOT_TAG_NONE		0
+#define UBOOT_TAG_CMDLINE	1
+#define UBOOT_TAG_DTB		2
+/* We always pass 0 as magic from U-boot */
+#define UBOOT_MAGIC_VALUE	0
+
+void __init handle_uboot_args(void)
 {
+	bool use_embedded_dtb = true;
+	bool append_cmdline = false;
+
 #ifdef CONFIG_ARC_UBOOT_SUPPORT
-	/* make sure that uboot passed pointer to cmdline/dtb is valid */
-	if (uboot_tag && is_kernel((unsigned long)uboot_arg))
-		panic("Invalid uboot arg\n");
+	/* check that we know this tag */
+	if (uboot_tag != UBOOT_TAG_NONE &&
+	    uboot_tag != UBOOT_TAG_CMDLINE &&
+	    uboot_tag != UBOOT_TAG_DTB) {
+		pr_warn(IGNORE_ARGS "invalid uboot tag: '%08x'\n", uboot_tag);
+		goto ignore_uboot_args;
+	}
 
-	/* See if u-boot passed an external Device Tree blob */
-	machine_desc = setup_machine_fdt(uboot_arg);	/* uboot_tag == 2 */
-	if (!machine_desc)
+	if (uboot_magic != UBOOT_MAGIC_VALUE) {
+		pr_warn(IGNORE_ARGS "non zero uboot magic\n");
+		goto ignore_uboot_args;
+	}
+
+	if (uboot_tag != UBOOT_TAG_NONE &&
+            uboot_arg_invalid((unsigned long)uboot_arg)) {
+		pr_warn(IGNORE_ARGS "invalid uboot arg: '%px'\n", uboot_arg);
+		goto ignore_uboot_args;
+	}
+
+	/* see if U-boot passed an external Device Tree blob */
+	if (uboot_tag == UBOOT_TAG_DTB) {
+		machine_desc = setup_machine_fdt((void *)uboot_arg);
+
+		/* external Device Tree blob is invalid - use embedded one */
+		use_embedded_dtb = !machine_desc;
+	}
+
+	if (uboot_tag == UBOOT_TAG_CMDLINE)
+		append_cmdline = true;
+
+ignore_uboot_args:
 #endif
-	{
-		/* No, so try the embedded one */
+
+	if (use_embedded_dtb) {
 		machine_desc = setup_machine_fdt(__dtb_start);
 		if (!machine_desc)
 			panic("Embedded DT invalid\n");
+	}
 
-		/*
-		 * If we are here, it is established that @uboot_arg didn't
-		 * point to DT blob. Instead if u-boot says it is cmdline,
-		 * append to embedded DT cmdline.
-		 * setup_machine_fdt() would have populated @boot_command_line
-		 */
-		if (uboot_tag == 1) {
-			/* Ensure a whitespace between the 2 cmdlines */
-			strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
-			strlcat(boot_command_line, uboot_arg,
-				COMMAND_LINE_SIZE);
-		}
+	/*
+	 * NOTE: @boot_command_line is populated by setup_machine_fdt() so this
+	 * append processing can only happen after.
+	 */
+	if (append_cmdline) {
+		/* Ensure a whitespace between the 2 cmdlines */
+		strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+		strlcat(boot_command_line, uboot_arg, COMMAND_LINE_SIZE);
 	}
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+	handle_uboot_args();
 
 	/* Save unparsed command line copy for /proc/cmdline */
 	*cmdline_p = boot_command_line;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/kernel/smp.c linux-libre-4.14.119-gnu/arch/arc/kernel/smp.c
--- linux-libre-4.14-gnu/arch/arc/kernel/smp.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/kernel/smp.c	2019-05-14 13:18:47.000000000 -0400
@@ -24,6 +24,7 @@
 #include <linux/reboot.h>
 #include <linux/irqdomain.h>
 #include <linux/export.h>
+#include <linux/of_fdt.h>
 
 #include <asm/processor.h>
 #include <asm/setup.h>
@@ -47,6 +48,42 @@ void __init smp_prepare_boot_cpu(void)
 {
 }
 
+static int __init arc_get_cpu_map(const char *name, struct cpumask *cpumask)
+{
+	unsigned long dt_root = of_get_flat_dt_root();
+	const char *buf;
+
+	buf = of_get_flat_dt_prop(dt_root, name, NULL);
+	if (!buf)
+		return -EINVAL;
+
+	if (cpulist_parse(buf, cpumask))
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * Read from DeviceTree and setup cpu possible mask. If there is no
+ * "possible-cpus" property in DeviceTree pretend all [0..NR_CPUS-1] exist.
+ */
+static void __init arc_init_cpu_possible(void)
+{
+	struct cpumask cpumask;
+
+	if (arc_get_cpu_map("possible-cpus", &cpumask)) {
+		pr_warn("Failed to get possible-cpus from dtb, pretending all %u cpus exist\n",
+			NR_CPUS);
+
+		cpumask_setall(&cpumask);
+	}
+
+	if (!cpumask_test_cpu(0, &cpumask))
+		panic("Master cpu (cpu[0]) is missed in cpu possible mask!");
+
+	init_cpu_possible(&cpumask);
+}
+
 /*
  * Called from setup_arch() before calling setup_processor()
  *
@@ -58,10 +95,7 @@ void __init smp_prepare_boot_cpu(void)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i;
-
-	for (i = 0; i < NR_CPUS; i++)
-		set_cpu_possible(i, true);
+	arc_init_cpu_possible();
 
 	if (plat_smp_ops.init_early_smp)
 		plat_smp_ops.init_early_smp();
@@ -70,16 +104,12 @@ void __init smp_init_cpus(void)
 /* called from init ( ) =>  process 1 */
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
 	/*
 	 * if platform didn't set the present map already, do it now
 	 * boot cpu is set to present already by init/main.c
 	 */
-	if (num_present_cpus() <= 1) {
-		for (i = 0; i < max_cpus; i++)
-			set_cpu_present(i, true);
-	}
+	if (num_present_cpus() <= 1)
+		init_cpu_present(cpu_possible_mask);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/lib/memcpy-archs.S linux-libre-4.14.119-gnu/arch/arc/lib/memcpy-archs.S
--- linux-libre-4.14-gnu/arch/arc/lib/memcpy-archs.S	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/lib/memcpy-archs.S	2019-05-14 13:18:47.000000000 -0400
@@ -25,15 +25,11 @@
 #endif
 
 #ifdef CONFIG_ARC_HAS_LL64
-# define PREFETCH_READ(RX)	prefetch    [RX, 56]
-# define PREFETCH_WRITE(RX)	prefetchw   [RX, 64]
 # define LOADX(DST,RX)		ldd.ab	DST, [RX, 8]
 # define STOREX(SRC,RX)		std.ab	SRC, [RX, 8]
 # define ZOLSHFT		5
 # define ZOLAND			0x1F
 #else
-# define PREFETCH_READ(RX)	prefetch    [RX, 28]
-# define PREFETCH_WRITE(RX)	prefetchw   [RX, 32]
 # define LOADX(DST,RX)		ld.ab	DST, [RX, 4]
 # define STOREX(SRC,RX)		st.ab	SRC, [RX, 4]
 # define ZOLSHFT		4
@@ -41,8 +37,6 @@
 #endif
 
 ENTRY_CFI(memcpy)
-	prefetch [r1]		; Prefetch the read location
-	prefetchw [r0]		; Prefetch the write location
 	mov.f	0, r2
 ;;; if size is zero
 	jz.d	[blink]
@@ -72,8 +66,6 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy32_64bytes
 	;; LOOP START
 	LOADX (r6, r1)
-	PREFETCH_READ (r1)
-	PREFETCH_WRITE (r3)
 	LOADX (r8, r1)
 	LOADX (r10, r1)
 	LOADX (r4, r1)
@@ -117,9 +109,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_1
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 24)
 	or	r7, r7, r5
@@ -162,9 +152,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_2
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 16)
 	or	r7, r7, r5
@@ -204,9 +192,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_3
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 8)
 	or	r7, r7, r5
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/lib/memset-archs.S linux-libre-4.14.119-gnu/arch/arc/lib/memset-archs.S
--- linux-libre-4.14-gnu/arch/arc/lib/memset-archs.S	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/lib/memset-archs.S	2019-05-14 13:18:47.000000000 -0400
@@ -7,11 +7,39 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/cache.h>
 
-#undef PREALLOC_NOT_AVAIL
+/*
+ * The memset implementation below is optimized to use prefetchw and prealloc
+ * instruction in case of CPU with 64B L1 data cache line (L1_CACHE_SHIFT == 6)
+ * If you want to implement optimized memset for other possible L1 data cache
+ * line lengths (32B and 128B) you should rewrite code carefully checking
+ * we don't call any prefetchw/prealloc instruction for L1 cache lines which
+ * don't belongs to memset area.
+ */
+
+#if L1_CACHE_SHIFT == 6
+
+.macro PREALLOC_INSTR	reg, off
+	prealloc	[\reg, \off]
+.endm
+
+.macro PREFETCHW_INSTR	reg, off
+	prefetchw	[\reg, \off]
+.endm
+
+#else
+
+.macro PREALLOC_INSTR
+.endm
+
+.macro PREFETCHW_INSTR
+.endm
+
+#endif
 
 ENTRY_CFI(memset)
-	prefetchw [r0]		; Prefetch the write location
+	PREFETCHW_INSTR	r0, 0	; Prefetch the first write location
 	mov.f	0, r2
 ;;; if size is zero
 	jz.d	[blink]
@@ -48,11 +76,8 @@ ENTRY_CFI(memset)
 
 	lpnz	@.Lset64bytes
 	;; LOOP START
-#ifdef PREALLOC_NOT_AVAIL
-	prefetchw [r3, 64]	;Prefetch the next write location
-#else
-	prealloc  [r3, 64]
-#endif
+	PREALLOC_INSTR	r3, 64	; alloc next line w/o fetching
+
 #ifdef CONFIG_ARC_HAS_LL64
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
@@ -85,7 +110,6 @@ ENTRY_CFI(memset)
 	lsr.f	lp_count, r2, 5 ;Last remaining  max 124 bytes
 	lpnz	.Lset32bytes
 	;; LOOP START
-	prefetchw   [r3, 32]	;Prefetch the next write location
 #ifdef CONFIG_ARC_HAS_LL64
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/Makefile linux-libre-4.14.119-gnu/arch/arc/Makefile
--- linux-libre-4.14-gnu/arch/arc/Makefile	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/Makefile	2019-05-14 13:18:47.000000000 -0400
@@ -6,34 +6,12 @@
 # published by the Free Software Foundation.
 #
 
-ifeq ($(CROSS_COMPILE),)
-ifndef CONFIG_CPU_BIG_ENDIAN
-CROSS_COMPILE := arc-linux-
-else
-CROSS_COMPILE := arceb-linux-
-endif
-endif
-
-KBUILD_DEFCONFIG := nsim_700_defconfig
+KBUILD_DEFCONFIG := nsim_hs_defconfig
 
-cflags-y	+= -fno-common -pipe -fno-builtin -D__linux__
+cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
 cflags-$(CONFIG_ISA_ARCOMPACT)	+= -mA7
 cflags-$(CONFIG_ISA_ARCV2)	+= -mcpu=archs
 
-is_700 = $(shell $(CC) -dM -E - < /dev/null | grep -q "ARC700" && echo 1 || echo 0)
-
-ifdef CONFIG_ISA_ARCOMPACT
-ifeq ($(is_700), 0)
-    $(error Toolchain not configured for ARCompact builds)
-endif
-endif
-
-ifdef CONFIG_ISA_ARCV2
-ifeq ($(is_700), 1)
-    $(error Toolchain not configured for ARCv2 builds)
-endif
-endif
-
 ifdef CONFIG_ARC_CURR_IN_REG
 # For a global register defintion, make sure it gets passed to every file
 # We had a customer reported bug where some code built in kernel was NOT using
@@ -87,7 +65,7 @@ ldflags-$(CONFIG_CPU_BIG_ENDIAN)	+= -EB
 # --build-id w/o "-marclinux". Default arc-elf32-ld is OK
 ldflags-$(upto_gcc44)			+= -marclinux
 
-LIBGCC	:= $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
+LIBGCC	= $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
 
 # Modules with short calls might break for calls into builtin-kernel
 KBUILD_CFLAGS_MODULE	+= -mlong-calls -mno-millicode
@@ -140,16 +118,3 @@ dtbs: scripts
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
-
-# Hacks to enable final link due to absence of link-time branch relexation
-# and gcc choosing optimal(shorter) branches at -O3
-#
-# vineetg Feb 2010: -mlong-calls switched off for overall kernel build
-# However lib/decompress_inflate.o (.init.text) calls
-# zlib_inflate_workspacesize (.text) causing relocation errors.
-# Thus forcing all exten calls in this file to be long calls
-export CFLAGS_decompress_inflate.o = -mmedium-calls
-export CFLAGS_initramfs.o = -mmedium-calls
-ifdef CONFIG_SMP
-export CFLAGS_core.o = -mmedium-calls
-endif
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/mm/cache.c linux-libre-4.14.119-gnu/arch/arc/mm/cache.c
--- linux-libre-4.14-gnu/arch/arc/mm/cache.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/mm/cache.c	2019-05-14 13:18:47.000000000 -0400
@@ -1035,7 +1035,7 @@ void flush_cache_mm(struct mm_struct *mm
 void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr,
 		      unsigned long pfn)
 {
-	unsigned int paddr = pfn << PAGE_SHIFT;
+	phys_addr_t paddr = pfn << PAGE_SHIFT;
 
 	u_vaddr &= PAGE_MASK;
 
@@ -1055,8 +1055,9 @@ void flush_anon_page(struct vm_area_stru
 		     unsigned long u_vaddr)
 {
 	/* TBD: do we really need to clear the kernel mapping */
-	__flush_dcache_page(page_address(page), u_vaddr);
-	__flush_dcache_page(page_address(page), page_address(page));
+	__flush_dcache_page((phys_addr_t)page_address(page), u_vaddr);
+	__flush_dcache_page((phys_addr_t)page_address(page),
+			    (phys_addr_t)page_address(page));
 
 }
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/mm/init.c linux-libre-4.14.119-gnu/arch/arc/mm/init.c
--- linux-libre-4.14-gnu/arch/arc/mm/init.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/mm/init.c	2019-05-14 13:18:47.000000000 -0400
@@ -138,7 +138,8 @@ void __init setup_arch_memory(void)
 	 */
 
 	memblock_add_node(low_mem_start, low_mem_sz, 0);
-	memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
+	memblock_reserve(CONFIG_LINUX_LINK_BASE,
+			 __pa(_end) - CONFIG_LINUX_LINK_BASE);
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start)
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/plat-eznps/include/plat/ctop.h linux-libre-4.14.119-gnu/arch/arc/plat-eznps/include/plat/ctop.h
--- linux-libre-4.14-gnu/arch/arc/plat-eznps/include/plat/ctop.h	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/plat-eznps/include/plat/ctop.h	2019-05-14 13:18:47.000000000 -0400
@@ -21,6 +21,7 @@
 #error "Incorrect ctop.h include"
 #endif
 
+#include <linux/types.h>
 #include <soc/nps/common.h>
 
 /* core auxiliary registers */
@@ -143,6 +144,15 @@ struct nps_host_reg_gim_p_int_dst {
 };
 
 /* AUX registers definition */
+struct nps_host_reg_aux_dpc {
+	union {
+		struct {
+			u32 ien:1, men:1, hen:1, reserved:29;
+		};
+		u32 value;
+	};
+};
+
 struct nps_host_reg_aux_udmc {
 	union {
 		struct {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/plat-eznps/mtm.c linux-libre-4.14.119-gnu/arch/arc/plat-eznps/mtm.c
--- linux-libre-4.14-gnu/arch/arc/plat-eznps/mtm.c	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/plat-eznps/mtm.c	2019-05-14 13:18:47.000000000 -0400
@@ -15,6 +15,8 @@
  */
 
 #include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/log2.h>
 #include <asm/arcregs.h>
@@ -157,10 +159,10 @@ void mtm_enable_core(unsigned int cpu)
 /* Verify and set the value of the mtm hs counter */
 static int __init set_mtm_hs_ctr(char *ctr_str)
 {
-	long hs_ctr;
+	int hs_ctr;
 	int ret;
 
-	ret = kstrtol(ctr_str, 0, &hs_ctr);
+	ret = kstrtoint(ctr_str, 0, &hs_ctr);
 
 	if (ret || hs_ctr > MT_HS_CNT_MAX || hs_ctr < MT_HS_CNT_MIN) {
 		pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n",
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arc/plat-hsdk/Kconfig linux-libre-4.14.119-gnu/arch/arc/plat-hsdk/Kconfig
--- linux-libre-4.14-gnu/arch/arc/plat-hsdk/Kconfig	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arc/plat-hsdk/Kconfig	2019-05-14 13:18:47.000000000 -0400
@@ -7,5 +7,8 @@
 
 menuconfig ARC_SOC_HSDK
 	bool "ARC HS Development Kit SOC"
+	depends on ISA_ARCV2
+	select ARC_HAS_ACCL_REGS
+	select ARC_IRQ_NO_AUTOSAVE
 	select CLK_HSDK
 	select RESET_HSDK
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/compressed/head.S linux-libre-4.14.119-gnu/arch/arm/boot/compressed/head.S
--- linux-libre-4.14-gnu/arch/arm/boot/compressed/head.S	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/compressed/head.S	2019-05-14 13:18:47.000000000 -0400
@@ -29,19 +29,19 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
 #elif defined(CONFIG_CPU_XSCALE)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c8, c0, 0
 		.endm
 #else
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c1, c0, 0
@@ -57,7 +57,7 @@
 		.endm
 
 #if defined(CONFIG_ARCH_SA1100)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		mov	\rb, #0x80000000	@ physical base address
 #ifdef CONFIG_DEBUG_LL_SER3
 		add	\rb, \rb, #0x00050000	@ Ser3
@@ -66,8 +66,8 @@
 #endif
 		.endm
 #else
-		.macro	loadsp,	rb, tmp
-		addruart \rb, \tmp
+		.macro	loadsp,	rb, tmp1, tmp2
+		addruart \rb, \tmp1, \tmp2
 		.endm
 #endif
 #endif
@@ -559,8 +559,6 @@ not_relocated:	mov	r0, #0
 		bl	decompress_kernel
 		bl	cache_clean_flush
 		bl	cache_off
-		mov	r1, r7			@ restore architecture number
-		mov	r2, r8			@ restore atags pointer
 
 #ifdef CONFIG_ARM_VIRT_EXT
 		mrs	r0, spsr		@ Get saved CPU boot mode
@@ -1295,7 +1293,7 @@ phex:		adr	r3, phexbuf
 		b	1b
 
 @ puts corrupts {r0, r1, r2, r3}
-puts:		loadsp	r3, r1
+puts:		loadsp	r3, r2, r1
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
 		moveq	pc, lr
@@ -1312,8 +1310,8 @@ puts:		loadsp	r3, r1
 @ putc corrupts {r0, r1, r2, r3}
 putc:
 		mov	r2, r0
+		loadsp	r3, r1, r0
 		mov	r0, #0
-		loadsp	r3, r1
 		b	2b
 
 @ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
@@ -1363,6 +1361,8 @@ __hyp_reentry_vectors:
 
 __enter_kernel:
 		mov	r0, #0			@ must be 0
+		mov	r1, r7			@ restore architecture number
+		mov	r2, r8			@ restore atags pointer
  ARM(		mov	pc, r4		)	@ call kernel
  M_CLASS(	add	r4, r4, #1	)	@ enter in Thumb mode for M class
  THUMB(		bx	r4		)	@ entry point is always ARM for A/R classes
@@ -1393,7 +1393,21 @@ ENTRY(efi_stub_entry)
 
 		@ Preserve return value of efi_entry() in r4
 		mov	r4, r0
-		bl	cache_clean_flush
+
+		@ our cache maintenance code relies on CP15 barrier instructions
+		@ but since we arrived here with the MMU and caches configured
+		@ by UEFI, we must check that the CP15BEN bit is set in SCTLR.
+		@ Note that this bit is RAO/WI on v6 and earlier, so the ISB in
+		@ the enable path will be executed on v7+ only.
+		mrc	p15, 0, r1, c1, c0, 0	@ read SCTLR
+		tst	r1, #(1 << 5)		@ CP15BEN bit set?
+		bne	0f
+		orr	r1, r1, #(1 << 5)	@ CP15 barrier instructions
+		mcr	p15, 0, r1, c1, c0, 0	@ write SCTLR
+ ARM(		.inst	0xf57ff06f		@ v7+ isb	)
+ THUMB(		isb						)
+
+0:		bl	cache_clean_flush
 		bl	cache_off
 
 		@ Set parameters for booting zImage according to boot protocol
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/compressed/Makefile linux-libre-4.14.119-gnu/arch/arm/boot/compressed/Makefile
--- linux-libre-4.14-gnu/arch/arm/boot/compressed/Makefile	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/compressed/Makefile	2019-05-14 13:18:47.000000000 -0400
@@ -113,7 +113,7 @@ CFLAGS_fdt_ro.o := $(nossp_flags)
 CFLAGS_fdt_rw.o := $(nossp_flags)
 CFLAGS_fdt_wip.o := $(nossp_flags)
 
-ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
+ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin -I$(obj)
 asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/am335x-evm.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/am335x-evm.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/am335x-evm.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/am335x-evm.dts	2019-05-14 13:18:47.000000000 -0400
@@ -57,6 +57,24 @@
 		enable-active-high;
 	};
 
+	/* TPS79501 */
+	v1_8d_reg: fixedregulator-v1_8d {
+		compatible = "regulator-fixed";
+		regulator-name = "v1_8d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* TPS79501 */
+	v3_3d_reg: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "v3_3d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
@@ -492,10 +510,10 @@
 		status = "okay";
 
 		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
+		AVDD-supply = <&v3_3d_reg>;
+		IOVDD-supply = <&v3_3d_reg>;
+		DRVDD-supply = <&v3_3d_reg>;
+		DVDD-supply = <&v1_8d_reg>;
 	};
 };
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/am335x-evmsk.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/am335x-evmsk.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/am335x-evmsk.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/am335x-evmsk.dts	2019-05-14 13:18:47.000000000 -0400
@@ -73,6 +73,24 @@
 		enable-active-high;
 	};
 
+	/* TPS79518 */
+	v1_8d_reg: fixedregulator-v1_8d {
+		compatible = "regulator-fixed";
+		regulator-name = "v1_8d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* TPS78633 */
+	v3_3d_reg: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "v3_3d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_s0>;
@@ -493,10 +511,10 @@
 		status = "okay";
 
 		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
+		AVDD-supply = <&v3_3d_reg>;
+		IOVDD-supply = <&v3_3d_reg>;
+		DRVDD-supply = <&v3_3d_reg>;
+		DVDD-supply = <&v1_8d_reg>;
 	};
 };
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/am3517.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/am3517.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/am3517.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/am3517.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -87,6 +87,11 @@
 	};
 };
 
+/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
+&usb_otg_hs {
+	status = "disabled";
+};
+
 &iva {
 	status = "disabled";
 };
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/am4372.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/am4372.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/am4372.dtsi	2017-11-12 15:34:50.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/am4372.dtsi	2019-05-15 03:42:51.000000000 -0400
@@ -927,7 +927,8 @@
 			reg = <0x48038000 0x2000>,
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8 2>,
@@ -941,7 +942,8 @@
 			reg = <0x4803C000 0x2000>,
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10 2>,
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/am437x-cm-t43.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/am437x-cm-t43.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/am437x-cm-t43.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/am437x-cm-t43.dts	2019-05-14 13:18:47.000000000 -0400
@@ -301,8 +301,8 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
-	dmas = <&edma 16
-		&edma 17>;
+	dmas = <&edma 16 0
+		&edma 17 0>;
 	dma-names = "tx0", "rx0";
 
 	flash: w25q64cvzpig@0 {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/am437x-sk-evm.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/am437x-sk-evm.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/am437x-sk-evm.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/am437x-sk-evm.dts	2019-05-14 13:18:47.000000000 -0400
@@ -535,6 +535,8 @@
 
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <272>;
+
+		wakeup-source;
 	};
 
 	tlv320aic3106: tlv320aic3106@1b {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/armada-385-synology-ds116.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/armada-385-synology-ds116.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/armada-385-synology-ds116.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/armada-385-synology-ds116.dts	2019-05-14 13:18:47.000000000 -0400
@@ -170,7 +170,7 @@
 					      3700 5
 					      3900 6
 					      4000 7>;
-			cooling-cells = <2>;
+			#cooling-cells = <2>;
 		};
 
 		gpio-leds {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/arm-realview-eb-mp.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/arm-realview-eb-mp.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/arm-realview-eb-mp.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -150,11 +150,6 @@
 	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
 };
 
-&charlcd {
-	interrupt-parent = <&intc>;
-	interrupts = <0  IRQ_TYPE_LEVEL_HIGH>;
-};
-
 &serial0 {
 	interrupt-parent = <&intc>;
 	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/aspeed-ast2500-evb.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/aspeed-ast2500-evb.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/aspeed-ast2500-evb.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/aspeed-ast2500-evb.dts	2019-05-14 13:18:47.000000000 -0400
@@ -16,7 +16,7 @@
 		bootargs = "console=ttyS4,115200 earlyprintk";
 	};
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x20000000>;
 	};
 };
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/at91sam9g25.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/at91sam9g25.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/at91sam9g25.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/at91sam9g25.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -21,7 +21,7 @@
 				atmel,mux-mask = <
 				      /*    A         B          C     */
 				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
-				       0x0007ffff 0x8000fe3f 0x00000000  /* pioB */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
 				       0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/at91-tse850-3.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/at91-tse850-3.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/at91-tse850-3.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/at91-tse850-3.dts	2019-05-14 13:18:47.000000000 -0400
@@ -245,7 +245,7 @@
 	};
 
 	eeprom@50 {
-		compatible = "nxp,24c02", "atmel,24c02";
+		compatible = "nxp,se97b", "atmel,24c02";
 		reg = <0x50>;
 		pagesize = <16>;
 	};
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts	2019-05-14 13:18:47.000000000 -0400
@@ -93,7 +93,7 @@
 };
 
 &hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
 };
 
 &uart0 {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/bcm2836.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm2836.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/bcm2836.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm2836.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -9,7 +9,7 @@
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc {
+		local_intc: local_intc@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/bcm2837.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm2837.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/bcm2837.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm2837.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -8,7 +8,7 @@
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc {
+		local_intc: local_intc@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/bcm283x.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm283x.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/bcm283x.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm283x.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -251,7 +251,7 @@
 
 			jtag_gpio4: jtag_gpio4 {
 				brcm,pins = <4 5 6 12 13>;
-				brcm,function = <BCM2835_FSEL_ALT4>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
 			jtag_gpio22: jtag_gpio22 {
 				brcm,pins = <22 23 24 25 26 27>;
@@ -396,8 +396,8 @@
 
 		i2s: i2s@7e203000 {
 			compatible = "brcm,bcm2835-i2s";
-			reg = <0x7e203000 0x20>,
-			      <0x7e101098 0x02>;
+			reg = <0x7e203000 0x24>;
+			clocks = <&clocks BCM2835_CLOCK_PCM>;
 
 			dmas = <&dma 2>,
 			       <&dma 3>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/bcm5301x.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm5301x.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/bcm5301x.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm5301x.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -365,7 +365,7 @@
 	i2c0: i2c@18009000 {
 		compatible = "brcm,iproc-i2c";
 		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-frequency = <100000>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/bcm63138.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm63138.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/bcm63138.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm63138.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -106,21 +106,23 @@
 		global_timer: timer@1e200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x1e200 0x20>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&axi_clk>;
 		};
 
 		local_timer: local-timer@1e600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x1e600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&axi_clk>;
 		};
 
 		twd_watchdog: watchdog@1e620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0x1e620 0x20>;
-			interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		armpll: armpll {
@@ -158,7 +160,7 @@
 		serial0: serial@600 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x600 0x1b>;
-			interrupts = <GIC_SPI 32 0>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&periph_clk>;
 			clock-names = "periph";
 			status = "disabled";
@@ -167,7 +169,7 @@
 		serial1: serial@620 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x620 0x1b>;
-			interrupts = <GIC_SPI 33 0>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&periph_clk>;
 			clock-names = "periph";
 			status = "disabled";
@@ -180,7 +182,7 @@
 			reg = <0x2000 0x600>, <0xf0 0x10>;
 			reg-names = "nand", "nand-int-base";
 			status = "disabled";
-			interrupts = <GIC_SPI 38 0>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "nand";
 		};
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/bcm958623hr.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm958623hr.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/bcm958623hr.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm958623hr.dts	2019-05-14 13:18:47.000000000 -0400
@@ -141,10 +141,6 @@
 	status = "okay";
 };
 
-&sata {
-	status = "okay";
-};
-
 &qspi {
 	bspi-sel = <0>;
 	flash: m25p80@0 {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/bcm958625hr.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm958625hr.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/bcm958625hr.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm958625hr.dts	2019-05-14 13:18:47.000000000 -0400
@@ -49,7 +49,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
+		reg = <0x60000000 0x20000000>;
 	};
 
 	gpio-restart {
@@ -177,10 +177,6 @@
 	status = "okay";
 };
 
-&sata {
-	status = "okay";
-};
-
 &srab {
 	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
 	status = "okay";
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/bcm-cygnus.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm-cygnus.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/bcm-cygnus.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm-cygnus.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -69,7 +69,7 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
@@ -216,7 +216,7 @@
 			reg = <0x18008000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <100000>;
 			status = "disabled";
 		};
@@ -245,7 +245,7 @@
 			reg = <0x1800b000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <100000>;
 			status = "disabled";
 		};
@@ -256,7 +256,7 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 
 			linux,pci-domain = <0>;
 
@@ -278,10 +278,10 @@
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
-					     <GIC_SPI 97 IRQ_TYPE_NONE>,
-					     <GIC_SPI 98 IRQ_TYPE_NONE>,
-					     <GIC_SPI 99 IRQ_TYPE_NONE>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -291,7 +291,7 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 
 			linux,pci-domain = <1>;
 
@@ -313,10 +313,10 @@
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>,
-					     <GIC_SPI 103 IRQ_TYPE_NONE>,
-					     <GIC_SPI 104 IRQ_TYPE_NONE>,
-					     <GIC_SPI 105 IRQ_TYPE_NONE>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/bcm-nsp.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm-nsp.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/bcm-nsp.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/bcm-nsp.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -85,7 +85,7 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
@@ -93,7 +93,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x20600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 
@@ -391,7 +391,7 @@
 			reg = <0x38000 0x50>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <100000>;
 			dma-coherent;
 			status = "disabled";
@@ -496,7 +496,7 @@
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 
 		linux,pci-domain = <0>;
 
@@ -519,10 +519,10 @@
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
-				     <GIC_SPI 128 IRQ_TYPE_NONE>,
-				     <GIC_SPI 129 IRQ_TYPE_NONE>,
-				     <GIC_SPI 130 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 			brcm,pcie-msi-inten;
 		};
 	};
@@ -533,7 +533,7 @@
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 
 		linux,pci-domain = <1>;
 
@@ -556,10 +556,10 @@
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 133 IRQ_TYPE_NONE>,
-				     <GIC_SPI 134 IRQ_TYPE_NONE>,
-				     <GIC_SPI 135 IRQ_TYPE_NONE>,
-				     <GIC_SPI 136 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 			brcm,pcie-msi-inten;
 		};
 	};
@@ -570,7 +570,7 @@
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 
 		linux,pci-domain = <2>;
 
@@ -593,10 +593,10 @@
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>,
-				     <GIC_SPI 140 IRQ_TYPE_NONE>,
-				     <GIC_SPI 141 IRQ_TYPE_NONE>,
-				     <GIC_SPI 142 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
 			brcm,pcie-msi-inten;
 		};
 	};
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/da850.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/da850.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/da850.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/da850.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -34,8 +34,6 @@
 		pmx_core: pinmux@14120 {
 			compatible = "pinctrl-single";
 			reg = <0x14120 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			#pinctrl-cells = <2>;
 			pinctrl-single,bit-per-mux;
 			pinctrl-single,register-width = <32>;
@@ -520,11 +518,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			reg = <0x226000 0x1000>;
-			interrupts = <42 IRQ_TYPE_EDGE_BOTH
-				43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
-				45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
-				47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
-				49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <42 43 44 45 46 47 48 49 50>;
 			ti,ngpio = <144>;
 			ti,davinci-gpio-unbanked = <0>;
 			status = "disabled";
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/da850-evm.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/da850-evm.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/da850-evm.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/da850-evm.dts	2019-05-14 13:18:47.000000000 -0400
@@ -169,7 +169,7 @@
 
 	sound {
 		compatible = "simple-audio-card";
-		simple-audio-card,name = "DA850/OMAP-L138 EVM";
+		simple-audio-card,name = "DA850-OMAPL138 EVM";
 		simple-audio-card,widgets =
 			"Line", "Line In",
 			"Line", "Line Out";
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/da850-lcdk.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/da850-lcdk.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/da850-lcdk.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/da850-lcdk.dts	2019-05-14 13:18:47.000000000 -0400
@@ -28,7 +28,7 @@
 
 	sound {
 		compatible = "simple-audio-card";
-		simple-audio-card,name = "DA850/OMAP-L138 LCDK";
+		simple-audio-card,name = "DA850-OMAPL138 LCDK";
 		simple-audio-card,widgets =
 			"Line", "Line In",
 			"Line", "Line Out";
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/da850-lego-ev3.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/da850-lego-ev3.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/da850-lego-ev3.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/da850-lego-ev3.dts	2019-05-14 13:18:47.000000000 -0400
@@ -178,7 +178,7 @@
 	 */
 	battery {
 		pinctrl-names = "default";
-		pintctrl-0 = <&battery_pins>;
+		pinctrl-0 = <&battery_pins>;
 		compatible = "lego,ev3-battery";
 		io-channels = <&adc 4>, <&adc 3>;
 		io-channel-names = "voltage", "current";
@@ -392,7 +392,7 @@
 	batt_volt_en {
 		gpio-hog;
 		gpios = <6 GPIO_ACTIVE_HIGH>;
-		output-low;
+		output-high;
 	};
 };
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/dra71-evm.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/dra71-evm.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/dra71-evm.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/dra71-evm.dts	2019-05-14 13:18:47.000000000 -0400
@@ -24,13 +24,13 @@
 
 		regulator-name = "vddshv8";
 		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3000000>;
+		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;
 		vin-supply = <&evm_5v0>;
 
 		gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
 		states = <1800000 0x0
-			  3000000 0x1>;
+			  3300000 0x1>;
 	};
 
 	evm_1v8_sw: fixedregulator-evm_1v8 {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/dra76-evm.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/dra76-evm.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/dra76-evm.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/dra76-evm.dts	2019-05-14 13:18:47.000000000 -0400
@@ -148,6 +148,7 @@
 		compatible = "ti,tps65917";
 		reg = <0x58>;
 		ti,system-power-controller;
+		ti,palmas-override-powerhold;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/dra7.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/dra7.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/dra7.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/dra7.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -333,7 +333,7 @@
 				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
-				ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
 				status = "disabled";
 			};
 		};
@@ -1818,7 +1818,7 @@
 			};
 		};
 
-		dcan1: can@481cc000 {
+		dcan1: can@4ae3c000 {
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan1";
 			reg = <0x4ae3c000 0x2000>;
@@ -1828,7 +1828,7 @@
 			status = "disabled";
 		};
 
-		dcan2: can@481d0000 {
+		dcan2: can@48480000 {
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan2";
 			reg = <0x48480000 0x2000>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/emev2.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/emev2.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/emev2.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/emev2.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -31,13 +31,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			clock-frequency = <533000000>;
 		};
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
@@ -57,6 +57,7 @@
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
 	clocks@e0110000 {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/exynos3250.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos3250.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/exynos3250.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos3250.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -82,6 +82,22 @@
 			compatible = "arm,cortex-a7";
 			reg = <1>;
 			clock-frequency = <1000000000>;
+			clocks = <&cmu CLK_ARM_CLK>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+
+			operating-points = <
+				1000000 1150000
+				900000  1112500
+				800000  1075000
+				700000  1037500
+				600000  1000000
+				500000  962500
+				400000  925000
+				300000  887500
+				200000  850000
+				100000  850000
+			>;
 		};
 	};
 
@@ -156,6 +172,9 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+			clock-names = "clkout8";
+			clocks = <&cmu CLK_FIN_PLL>;
+			#clock-cells = <1>;
 		};
 
 		mipi_phy: video-phy {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/exynos4210.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos4210.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/exynos4210.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos4210.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -52,8 +52,6 @@
 				400000	975000
 				200000	950000
 			>;
-			cooling-min-level = <4>;
-			cooling-max-level = <2>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -61,6 +59,19 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x901>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			clock-latency = <160000>;
+
+			operating-points = <
+				1200000 1250000
+				1000000 1150000
+				800000	1075000
+				500000	975000
+				400000	975000
+				200000	950000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/exynos4210-origen.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos4210-origen.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/exynos4210-origen.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos4210-origen.dts	2019-05-14 13:18:47.000000000 -0400
@@ -152,6 +152,8 @@
 		reg = <0x66>;
 		interrupt-parent = <&gpx0>;
 		interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max8997_irq>;
 
 		max8997,pmic-buck1-dvs-voltage = <1350000>;
 		max8997,pmic-buck2-dvs-voltage = <1100000>;
@@ -289,6 +291,13 @@
 	};
 };
 
+&pinctrl_1 {
+	max8997_irq: max8997-irq {
+		samsung,pins = "gpx0-3", "gpx0-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
 &sdhci_0 {
 	bus-width = <4>;
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/exynos4412.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos4412.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/exynos4412.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos4412.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -45,8 +45,6 @@
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
-			cooling-min-level = <13>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/exynos4412-odroid-common.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/exynos4412-odroid-common.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos4412-odroid-common.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -60,7 +60,7 @@
 	};
 
 	emmc_pwrseq: pwrseq {
-		pinctrl-0 = <&sd1_cd>;
+		pinctrl-0 = <&emmc_rstn>;
 		pinctrl-names = "default";
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
@@ -161,12 +161,6 @@
 	cpu0-supply = <&buck2_reg>;
 };
 
-/* RSTN signal for eMMC */
-&sd1_cd {
-	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
 &pinctrl_1 {
 	gpio_power_key: power_key {
 		samsung,pins = "gpx1-3";
@@ -184,6 +178,11 @@
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
+
+	emmc_rstn: emmc-rstn {
+		samsung,pins = "gpk1-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &ehci {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/exynos4412-trats2.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos4412-trats2.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/exynos4412-trats2.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos4412-trats2.dts	2019-05-14 13:18:47.000000000 -0400
@@ -395,7 +395,7 @@
 		reg = <0>;
 		vdd3-supply = <&lcd_vdd3_reg>;
 		vci-supply = <&ldo25_reg>;
-		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
 		power-on-delay= <50>;
 		reset-delay = <100>;
 		init-delay = <100>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/exynos5250.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos5250.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/exynos5250.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos5250.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -57,38 +57,106 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
-			clock-frequency = <1700000000>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
-			clock-latency = <140000>;
-
-			operating-points = <
-				1700000 1300000
-				1600000 1250000
-				1500000 1225000
-				1400000 1200000
-				1300000 1150000
-				1200000 1125000
-				1100000 1100000
-				1000000 1075000
-				 900000 1050000
-				 800000 1025000
-				 700000 1012500
-				 600000 1000000
-				 500000  975000
-				 400000  950000
-				 300000  937500
-				 200000  925000
-			>;
-			cooling-min-level = <15>;
-			cooling-max-level = <9>;
+			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
-			clock-frequency = <1700000000>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <937500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <1012500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1025000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1050000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1075000>;
+			clock-latency-ns = <140000>;
+			opp-suspend;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1125000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1150000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1225000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <140000>;
 		};
 	};
 
@@ -643,7 +711,7 @@
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL0>;
 			clock-names = "gscl";
-			iommu = <&sysmmu_gsc0>;
+			iommus = <&sysmmu_gsc0>;
 		};
 
 		gsc_1:  gsc@13e10000 {
@@ -653,7 +721,7 @@
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL1>;
 			clock-names = "gscl";
-			iommu = <&sysmmu_gsc1>;
+			iommus = <&sysmmu_gsc1>;
 		};
 
 		gsc_2:  gsc@13e20000 {
@@ -663,7 +731,7 @@
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL2>;
 			clock-names = "gscl";
-			iommu = <&sysmmu_gsc2>;
+			iommus = <&sysmmu_gsc2>;
 		};
 
 		gsc_3:  gsc@13e30000 {
@@ -673,7 +741,7 @@
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL3>;
 			clock-names = "gscl";
-			iommu = <&sysmmu_gsc3>;
+			iommus = <&sysmmu_gsc3>;
 		};
 
 		hdmi: hdmi@14530000 {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/exynos5410.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos5410.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/exynos5410.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos5410.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -333,7 +333,6 @@
 &rtc {
 	clocks = <&clock CLK_RTC>;
 	clock-names = "rtc";
-	interrupt-parent = <&pmu_system_controller>;
 	status = "disabled";
 };
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/exynos5420-cpus.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos5420-cpus.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/exynos5420-cpus.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos5420-cpus.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -33,8 +33,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -45,8 +43,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -57,8 +53,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -69,8 +63,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -82,8 +74,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -94,8 +84,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -106,8 +94,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -118,8 +104,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/exynos5420-peach-pit.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos5420-peach-pit.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/exynos5420-peach-pit.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos5420-peach-pit.dts	2019-05-14 13:18:47.000000000 -0400
@@ -31,7 +31,7 @@
 
 	aliases {
 		/* Assign 20 so we don't get confused w/ builtin ones */
-		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+		i2c20 = &i2c_tunnel;
 	};
 
 	backlight: backlight {
@@ -952,7 +952,7 @@
 			samsung,spi-feedback-delay = <1>;
 		};
 
-		i2c-tunnel {
+		i2c_tunnel: i2c-tunnel {
 			compatible = "google,cros-ec-i2c-tunnel";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/exynos5422-cpus.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos5422-cpus.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/exynos5422-cpus.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos5422-cpus.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -32,8 +32,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -44,8 +42,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -56,8 +52,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -68,8 +62,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -81,8 +73,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -93,8 +83,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -105,8 +93,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -117,8 +103,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/exynos5800-peach-pi.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos5800-peach-pi.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/exynos5800-peach-pi.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/exynos5800-peach-pi.dts	2019-05-14 13:18:47.000000000 -0400
@@ -29,7 +29,7 @@
 
 	aliases {
 		/* Assign 20 so we don't get confused w/ builtin ones */
-		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+		i2c20 = &i2c_tunnel;
 	};
 
 	backlight: backlight {
@@ -921,7 +921,7 @@
 			samsung,spi-feedback-delay = <1>;
 		};
 
-		i2c-tunnel {
+		i2c_tunnel: i2c-tunnel {
 			compatible = "google,cros-ec-i2c-tunnel";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/gemini-dlink-dir-685.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/gemini-dlink-dir-685.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/gemini-dlink-dir-685.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/gemini-dlink-dir-685.dts	2019-05-14 13:18:47.000000000 -0400
@@ -128,20 +128,16 @@
 				read-only;
 			};
 			/*
-			 * Between the boot loader and the rootfs is the kernel
-			 * in a custom Storlink format flashed from the boot
-			 * menu. The rootfs is in squashfs format.
+			 * This firmware image contains the kernel catenated
+			 * with the squashfs root filesystem. For some reason
+			 * this is called "upgrade" on the vendor system.
 			 */
-			partition@1800c0 {
-				label = "rootfs";
-				reg = <0x001800c0 0x01dbff40>;
-				read-only;
-			};
-			partition@1f40000 {
+			partition@40000 {
 				label = "upgrade";
-				reg = <0x01f40000 0x00040000>;
+				reg = <0x00040000 0x01f40000>;
 				read-only;
 			};
+			/* RGDB, Residental Gateway Database? */
 			partition@1f80000 {
 				label = "rgdb";
 				reg = <0x01f80000 0x00040000>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/imx53.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx53.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/imx53.dtsi	2017-11-12 15:15:54.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx53.dtsi	2019-05-15 03:00:12.000000000 -0400
@@ -433,15 +433,6 @@
 				clock-names = "ipg", "per";
 			};
 
-			srtc: srtc@53fa4000 {
-				compatible = "fsl,imx53-rtc", "fsl,imx25-rtc";
-				reg = <0x53fa4000 0x4000>;
-				interrupts = <24>;
-				interrupt-parent = <&tzic>;
-				clocks = <&clks IMX5_CLK_SRTC_GATE>;
-				clock-names = "ipg";
-			};
-
 			iomuxc: iomuxc@53fa8000 {
 				compatible = "fsl,imx53-iomuxc";
 				reg = <0x53fa8000 0x4000>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/imx53-qsb-common.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx53-qsb-common.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/imx53-qsb-common.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx53-qsb-common.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -130,6 +130,17 @@
 	};
 };
 
+&cpu0 {
+	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+		1000000 1200000
+	>;
+};
+
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/imx6dl-icore-rqs.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx6dl-icore-rqs.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/imx6dl-icore-rqs.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx6dl-icore-rqs.dts	2019-05-14 13:18:47.000000000 -0400
@@ -42,7 +42,7 @@
 
 /dts-v1/;
 
-#include "imx6q.dtsi"
+#include "imx6dl.dtsi"
 #include "imx6qdl-icore-rqs.dtsi"
 
 / {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -222,7 +222,7 @@
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	vmcc-supply = <&reg_sd3_vmmc>;
 	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	bus-witdh = <4>;
+	bus-width = <4>;
 	no-1-8-v;
 	status = "okay";
 };
@@ -233,7 +233,7 @@
 	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
 	vmcc-supply = <&reg_sd4_vmmc>;
-	bus-witdh = <8>;
+	bus-width = <8>;
 	no-1-8-v;
 	non-removable;
 	status = "okay";
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -89,6 +89,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	phy-reset-duration = <10>; /* in msecs */
 	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
 	phy-supply = <&vdd_eth_io_reg>;
 	status = "disabled";
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -644,7 +644,7 @@
 			dsa,member = <0 0>;
 			eeprom-length = <512>;
 			interrupt-parent = <&gpio6>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/imx6q.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx6q.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/imx6q.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx6q.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -96,7 +96,7 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
+					dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/imx6sx.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx6sx.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/imx6sx.dtsi	2017-11-12 15:16:05.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx6sx.dtsi	2019-05-15 03:00:34.000000000 -0400
@@ -1305,7 +1305,7 @@
 				  0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
 			bus-range = <0x00 0xff>;
 			num-lanes = <1>;
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
 				 <&clks IMX6SX_CLK_PCIE_AXI>,
 				 <&clks IMX6SX_CLK_LVDS1_OUT>,
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/imx7d-cl-som-imx7.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/imx7d-cl-som-imx7.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx7d-cl-som-imx7.dts	2019-05-14 13:18:47.000000000 -0400
@@ -213,37 +213,37 @@
 &iomuxc {
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
-			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
-			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
-			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
-			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
-			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
-			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
-			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x30
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x30
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x11
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x11
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x11
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x11
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x11
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x11
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x11
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x11
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x11
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x11
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x11
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x11
 		>;
 	};
 
 	pinctrl_enet2: enet2grp {
 		fsl,pins = <
-			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
-			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
-			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
-			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
-			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
-			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
-			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
-			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
-			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
-			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
-			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
-			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x11
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x11
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x11
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x11
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x11
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x11
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x11
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x11
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x11
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x11
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x11
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x11
 		>;
 	};
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/imx7d.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx7d.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/imx7d.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx7d.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -144,10 +144,14 @@
 		interrupt-names = "msi";
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		/*
+		 * Reference manual lists pci irqs incorrectly
+		 * Real hardware ordering is same as imx6: D+MSI, C, B, A
+		 */
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
 			 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
 			 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/imx7d-nitrogen7.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx7d-nitrogen7.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/imx7d-nitrogen7.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx7d-nitrogen7.dts	2019-05-14 13:18:47.000000000 -0400
@@ -117,13 +117,17 @@
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
-		clock-names = "slow";
 		regulator-name = "reg_wlan";
 		startup-delay-us = <70000>;
 		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	usdhc2_pwrseq: usdhc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
 };
 
 &adc1 {
@@ -430,6 +434,7 @@
 	bus-width = <4>;
 	non-removable;
 	vmmc-supply = <&reg_wlan>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
 	cap-power-off-card;
 	keep-power-in-suspend;
 	status = "okay";
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/imx7d-sdb.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx7d-sdb.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/imx7d-sdb.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/imx7d-sdb.dts	2019-05-14 13:18:47.000000000 -0400
@@ -82,7 +82,7 @@
 		enable-active-high;
 	};
 
-	reg_usb_otg2_vbus: regulator-usb-otg1-vbus {
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg2_vbus";
 		regulator-min-microvolt = <5000000>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/kirkwood-dnskw.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/kirkwood-dnskw.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/kirkwood-dnskw.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/kirkwood-dnskw.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -36,8 +36,8 @@
 		compatible = "gpio-fan";
 		pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
 		pinctrl-names = "default";
-		gpios = <&gpio1 14 GPIO_ACTIVE_LOW
-			 &gpio1 13 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
+			 &gpio1 13 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0    0
 				      3000 1
 				      6000 2>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/kirkwood-openblocks_a7.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/kirkwood-openblocks_a7.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/kirkwood-openblocks_a7.dts	2019-05-14 13:18:47.000000000 -0400
@@ -53,7 +53,8 @@
 		};
 
 		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
+			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header
+				     &pmx_gpio_header_gpo>;
 			pinctrl-names = "default";
 
 			pmx_uart0: pmx-uart0 {
@@ -85,11 +86,16 @@
 			 * ground.
 			 */
 			pmx_gpio_header: pmx-gpio-header {
-				marvell,pins = "mpp17", "mpp7", "mpp29", "mpp28",
+				marvell,pins = "mpp17", "mpp29", "mpp28",
 					       "mpp35", "mpp34", "mpp40";
 				marvell,function = "gpio";
 			};
 
+			pmx_gpio_header_gpo: pxm-gpio-header-gpo {
+				marvell,pins = "mpp7";
+				marvell,function = "gpo";
+			};
+
 			pmx_gpio_init: pmx-init {
 				marvell,pins = "mpp38";
 				marvell,function = "gpio";
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts	2019-05-14 13:18:47.000000000 -0400
@@ -72,7 +72,8 @@
 };
 
 &gpmc {
-	ranges = <1 0 0x08000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
+		  1 0 0x2c000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
 
 	ethernet@gpmc {
 		pinctrl-names = "default";
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/logicpd-som-lv.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/logicpd-som-lv.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/logicpd-som-lv.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/logicpd-som-lv.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -26,7 +26,7 @@
 		gpio = <&gpio1 3 0>;   /* gpio_3 */
 		startup-delay-us = <70000>;
 		enable-active-high;
-		vin-supply = <&vmmc2>;
+		vin-supply = <&vaux3>;
 	};
 
 	/* HS USB Host PHY on PORT 1 */
@@ -37,7 +37,7 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
@@ -97,6 +97,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -106,6 +108,7 @@
 		twl_audio: audio {
 			compatible = "ti,twl4030-audio";
 			codec {
+				ti,hs_extmute_gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
 			};
 		};
 	};
@@ -120,8 +123,8 @@
 };
 
 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
-	pinctrl-0 = <&mmc3_pins>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
+	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;
 	non-removable;
@@ -132,8 +135,8 @@
 	wlcore: wlcore@2 {
 		compatible = "ti,wl1273";
 		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */
 		ref-clock-frequency = <26000000>;
 	};
 };
@@ -157,8 +160,6 @@
 			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
 			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
 			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
-			OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
 			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
 			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs2.sdmmc_clk */
 		>;
@@ -217,7 +218,13 @@
 		>;
 	};
 
-
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+			OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)        /* gpmc_ncs6.gpio_57 */
+		>;
+	};
 };
 
 &omap3_pmx_wkup {
@@ -228,6 +235,12 @@
 			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
 		>;
 	};
+	wl127x_gpio: pinmux_wl127x_gpio_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4)		/* sys_boot0.gpio_2 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -259,6 +272,11 @@
 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"
 
+&vaux3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
 &twl {
 	twl_power: power {
 		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/logicpd-torpedo-som.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/logicpd-torpedo-som.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/logicpd-torpedo-som.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -104,6 +104,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -211,6 +213,12 @@
 			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
 		>;
 	};
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
 };
 
 &uart2 {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/lpc3250-ea3250.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/lpc3250-ea3250.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/lpc3250-ea3250.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/lpc3250-ea3250.dts	2019-05-14 13:18:47.000000000 -0400
@@ -156,8 +156,8 @@
 	uda1380: uda1380@18 {
 		compatible = "nxp,uda1380";
 		reg = <0x18>;
-		power-gpio = <&gpio 0x59 0>;
-		reset-gpio = <&gpio 0x51 0>;
+		power-gpio = <&gpio 3 10 0>;
+		reset-gpio = <&gpio 3 2 0>;
 		dac-clk = "wspll";
 	};
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/lpc3250-phy3250.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/lpc3250-phy3250.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/lpc3250-phy3250.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/lpc3250-phy3250.dts	2019-05-14 13:18:47.000000000 -0400
@@ -81,8 +81,8 @@
 	uda1380: uda1380@18 {
 		compatible = "nxp,uda1380";
 		reg = <0x18>;
-		power-gpio = <&gpio 0x59 0>;
-		reset-gpio = <&gpio 0x51 0>;
+		power-gpio = <&gpio 3 10 0>;
+		reset-gpio = <&gpio 3 2 0>;
 		dac-clk = "wspll";
 	};
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/lpc32xx.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/lpc32xx.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/lpc32xx.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/lpc32xx.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -230,7 +230,7 @@
 				status = "disabled";
 			};
 
-			i2s1: i2s@2009C000 {
+			i2s1: i2s@2009c000 {
 				compatible = "nxp,lpc3220-i2s";
 				reg = <0x2009C000 0x1000>;
 			};
@@ -273,7 +273,7 @@
 				status = "disabled";
 			};
 
-			i2c1: i2c@400A0000 {
+			i2c1: i2c@400a0000 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x400A0000 0x100>;
 				interrupt-parent = <&sic1>;
@@ -284,7 +284,7 @@
 				clocks = <&clk LPC32XX_CLK_I2C1>;
 			};
 
-			i2c2: i2c@400A8000 {
+			i2c2: i2c@400a8000 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x400A8000 0x100>;
 				interrupt-parent = <&sic1>;
@@ -295,7 +295,7 @@
 				clocks = <&clk LPC32XX_CLK_I2C2>;
 			};
 
-			mpwm: mpwm@400E8000 {
+			mpwm: mpwm@400e8000 {
 				compatible = "nxp,lpc3220-motor-pwm";
 				reg = <0x400E8000 0x78>;
 				status = "disabled";
@@ -394,7 +394,7 @@
 				#gpio-cells = <3>; /* bank, pin, flags */
 			};
 
-			timer4: timer@4002C000 {
+			timer4: timer@4002c000 {
 				compatible = "nxp,lpc3220-timer";
 				reg = <0x4002C000 0x1000>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -412,7 +412,7 @@
 				status = "disabled";
 			};
 
-			watchdog: watchdog@4003C000 {
+			watchdog: watchdog@4003c000 {
 				compatible = "nxp,pnx4008-wdt";
 				reg = <0x4003C000 0x1000>;
 				clocks = <&clk LPC32XX_CLK_WDOG>;
@@ -451,7 +451,7 @@
 				status = "disabled";
 			};
 
-			timer1: timer@4004C000 {
+			timer1: timer@4004c000 {
 				compatible = "nxp,lpc3220-timer";
 				reg = <0x4004C000 0x1000>;
 				interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
@@ -475,7 +475,7 @@
 				status = "disabled";
 			};
 
-			pwm1: pwm@4005C000 {
+			pwm1: pwm@4005c000 {
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005C000 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM1>;
@@ -484,7 +484,7 @@
 				status = "disabled";
 			};
 
-			pwm2: pwm@4005C004 {
+			pwm2: pwm@4005c004 {
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005C004 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM2>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/ls1021a.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/ls1021a.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/ls1021a.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/ls1021a.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -84,6 +84,7 @@
 			device_type = "cpu";
 			reg = <0xf01>;
 			clocks = <&clockgen 1 0>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -155,7 +156,7 @@
 		};
 
 		esdhc: esdhc@1560000 {
-			compatible = "fsl,esdhc";
+			compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/ls1021a-qds.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/ls1021a-qds.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/ls1021a-qds.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/ls1021a-qds.dts	2019-05-14 13:18:47.000000000 -0400
@@ -215,7 +215,7 @@
 				reg = <0x2a>;
 				VDDA-supply = <&reg_3p3v>;
 				VDDIO-supply = <&reg_3p3v>;
-				clocks = <&sys_mclk 1>;
+				clocks = <&sys_mclk>;
 			};
 		};
 	};
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/ls1021a-twr.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/ls1021a-twr.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/ls1021a-twr.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/ls1021a-twr.dts	2019-05-14 13:18:47.000000000 -0400
@@ -187,7 +187,7 @@
 		reg = <0x0a>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&sys_mclk 1>;
+		clocks = <&sys_mclk>;
 	};
 };
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/mmp2.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/mmp2.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/mmp2.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/mmp2.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -220,12 +220,15 @@
 				status = "disabled";
 			};
 
-			twsi2: i2c@d4025000 {
+			twsi2: i2c@d4031000 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4025000 0x1000>;
-				interrupts = <58>;
+				reg = <0xd4031000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <0>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
 				resets = <&soc_clocks MMP2_CLK_TWSI1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -92,7 +92,7 @@
 			interrupts-extended = <
 				&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
 				&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
-				&cpcap 48 1
+				&cpcap 48 0
 			>;
 			interrupt-names =
 				"id_ground", "id_float", "se0conn", "vbusvld",
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/mt2701.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/mt2701.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/mt2701.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/mt2701.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -593,6 +593,7 @@
 		compatible = "mediatek,mt2701-hifsys", "syscon";
 		reg = <0 0x1a000000 0 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb0: usb@1a1c0000 {
@@ -677,6 +678,7 @@
 		compatible = "mediatek,mt2701-ethsys", "syscon";
 		reg = <0 0x1b000000 0 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	eth: ethernet@1b100000 {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/mt7623.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/mt7623.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/mt7623.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/mt7623.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -22,11 +22,12 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/reset/mt2701-resets.h>
 #include <dt-bindings/thermal/thermal.h>
-#include "skeleton64.dtsi"
 
 / {
 	compatible = "mediatek,mt7623";
 	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	cpu_opp_table: opp_table {
 		compatible = "operating-points-v2";
@@ -97,6 +98,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x1>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 			clock-frequency = <1300000000>;
 		};
 
@@ -105,6 +107,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x2>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 			clock-frequency = <1300000000>;
 		};
 
@@ -113,6 +116,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x3>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 			clock-frequency = <1300000000>;
 		};
 	};
@@ -753,6 +757,7 @@
 			     "syscon";
 		reg = <0 0x1b000000 0 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	eth: ethernet@1b100000 {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts	2019-05-14 13:18:47.000000000 -0400
@@ -39,6 +39,24 @@
 		};
 	};
 
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -82,6 +100,7 @@
 	};
 
 	memory@80000000 {
+		device_type = "memory";
 		reg = <0 0x80000000 0 0x40000000>;
 	};
 };
@@ -204,7 +223,7 @@
 	bus-width = <4>;
 	max-frequency = <50000000>;
 	cap-sd-highspeed;
-	cd-gpios = <&pio 261 0>;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&mt6323_vmch_reg>;
 	vqmmc-supply = <&mt6323_vio18_reg>;
 };
@@ -468,12 +487,14 @@
 };
 
 &usb1 {
-	vusb33-supply = <&mt6323_vusb_reg>;
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
 	status = "okay";
 };
 
 &usb2 {
-	vusb33-supply = <&mt6323_vusb_reg>;
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
 	status = "okay";
 };
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/mt7623n-rfb.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/mt7623n-rfb.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/mt7623n-rfb.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/mt7623n-rfb.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -47,6 +47,7 @@
 	};
 
 	memory@80000000 {
+		device_type = "memory";
 		reg = <0 0x80000000 0 0x40000000>;
 	};
 
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/omap4-droid4-xt894.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/omap4-droid4-xt894.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/omap4-droid4-xt894.dts	2017-11-12 15:32:12.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/omap4-droid4-xt894.dts	2019-05-15 03:39:59.000000000 -0400
@@ -314,7 +314,7 @@
 &mmc2 {
 	vmmc-supply = <&vsdio>;
 	bus-width = <8>;
-	non-removable;
+	ti,non-removable;
 };
 
 &mmc3 {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/omap4.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/omap4.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/omap4.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/omap4.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -354,7 +354,7 @@
 		elm: elm@48078000 {
 			compatible = "ti,am3352-elm";
 			reg = <0x48078000 0x2000>;
-			interrupts = <4>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "elm";
 			status = "disabled";
 		};
@@ -861,14 +861,12 @@
 			usbhsohci: ohci@4a064800 {
 				compatible = "ti,ohci-omap3";
 				reg = <0x4a064800 0x400>;
-				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			usbhsehci: ehci@4a064c00 {
 				compatible = "ti,ehci-omap";
 				reg = <0x4a064c00 0x400>;
-				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/omap4-sdp.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/omap4-sdp.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/omap4-sdp.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/omap4-sdp.dts	2019-05-14 13:18:47.000000000 -0400
@@ -33,6 +33,7 @@
 		gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;  /* gpio line 48 */
 		enable-active-high;
 		regulator-boot-on;
+		startup-delay-us = <25000>;
 	};
 
 	vbat: fixedregulator-vbat {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts	2019-05-14 13:18:47.000000000 -0400
@@ -189,6 +189,8 @@
 						regulator-max-microvolt = <2950000>;
 
 						regulator-boot-on;
+						regulator-system-load = <200000>;
+						regulator-allow-set-load;
 					};
 
 					l21 {
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/r8a7790.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/r8a7790.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/r8a7790.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/r8a7790.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -153,7 +153,7 @@
 
 			trips {
 				cpu-crit {
-					temperature	= <115000>;
+					temperature	= <95000>;
 					hysteresis	= <0>;
 					type		= "critical";
 				};
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/r8a7791.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/r8a7791.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/r8a7791.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/r8a7791.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -91,7 +91,7 @@
 
 			trips {
 				cpu-crit {
-					temperature	= <115000>;
+					temperature	= <95000>;
 					hysteresis	= <0>;
 					type		= "critical";
 				};
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts	2019-05-14 13:18:47.000000000 -0400
@@ -278,6 +278,12 @@
 		};
 	};
 
+	cec_clock: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -642,12 +648,6 @@
 		};
 	};
 
-	cec_clock: cec-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-	};
-
 	hdmi@39 {
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/r8a7791-porter.dts linux-libre-4.14.119-gnu/arch/arm/boot/dts/r8a7791-porter.dts
--- linux-libre-4.14-gnu/arch/arm/boot/dts/r8a7791-porter.dts	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/r8a7791-porter.dts	2019-05-14 13:18:47.000000000 -0400
@@ -427,7 +427,7 @@
 		      "dclkin.0", "dclkin.1";
 
 	ports {
-		port@1 {
+		port@0 {
 			endpoint {
 				remote-endpoint = <&adv7511_in>;
 			};
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/r8a7793.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/r8a7793.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/r8a7793.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/r8a7793.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -88,7 +88,7 @@
 
 			trips {
 				cpu-crit {
-					temperature	= <115000>;
+					temperature	= <95000>;
 					hysteresis	= <0>;
 					type		= "critical";
 				};
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/rk3036.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/rk3036.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/rk3036.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/rk3036.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -261,7 +261,7 @@
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		resets = <&cru SRST_SDIO>;
@@ -279,7 +279,7 @@
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/rk322x.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/rk322x.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/rk322x.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/rk322x.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -600,7 +600,7 @@
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
@@ -613,7 +613,7 @@
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
@@ -628,7 +628,7 @@
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		bus-width = <8>;
 		default-sample-phase = <158>;
 		fifo-depth = <0x100>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/rk3288.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/rk3288.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/rk3288.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/rk3288.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -927,6 +927,7 @@
 	i2s: i2s@ff890000 {
 		compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff890000 0x0 0x10000>;
+		#sound-dai-cells = <0>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1122,6 +1123,7 @@
 		compatible = "rockchip,rk3288-dw-hdmi";
 		reg = <0x0 0xff980000 0x0 0x20000>;
 		reg-io-width = <4>;
+		#sound-dai-cells = <0>;
 		rockchip,grf = <&grf>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
@@ -1179,27 +1181,27 @@
 	gpu_opp_table: gpu-opp-table {
 		compatible = "operating-points-v2";
 
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 			opp-microvolt = <950000>;
 		};
-		opp@200000000 {
+		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 			opp-microvolt = <950000>;
 		};
-		opp@300000000 {
+		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <1000000>;
 		};
-		opp@400000000 {
+		opp-400000000 {
 			opp-hz = /bits/ 64 <400000000>;
 			opp-microvolt = <1100000>;
 		};
-		opp@500000000 {
+		opp-500000000 {
 			opp-hz = /bits/ 64 <500000000>;
 			opp-microvolt = <1200000>;
 		};
-		opp@600000000 {
+		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1250000>;
 		};
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/rk3288-phycore-som.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/rk3288-phycore-som.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/rk3288-phycore-som.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/rk3288-phycore-som.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -110,26 +110,6 @@
 	};
 };
 
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
-	operating-points = <
-		/* KHz    uV */
-		1800000	1400000
-		1608000	1350000
-		1512000 1300000
-		1416000 1200000
-		1200000 1100000
-		1008000 1050000
-		 816000 1000000
-		 696000  950000
-		 600000  900000
-		 408000  900000
-		 312000  900000
-		 216000  900000
-		 126000  900000
-	>;
-};
-
 &emmc {
 	status = "okay";
 	bus-width = <8>;
diff -druNp --no-dereference linux-libre-4.14-gnu/arch/arm/boot/dts/rk3288-veyron.dtsi linux-libre-4.14.119-gnu/arch/arm/boot/dts/rk3288-veyron.dtsi
--- linux-libre-4.14-gnu/arch/arm/boot/dts/rk3288-veyron.dtsi	2017-11-12 13:46:13.000000000 -0500
+++ linux-libre-4.14.119-gnu/arch/arm/boot/dts/rk3288-veyron.dtsi	2019-05-14 13:18:47.000000000 -0400
@@ -47,7 +47,11 @@
 #include "rk3288.dtsi"
 
 / {
-	memory@0 {
+	/*
+	 * The default coreboot on veyron devices ignores memory@0 nodes
+	 * and would instead create another